Linux 3.2-rc7

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  VFS: Fix race between CPU hotplug and lglocks

Documentation/ABI/testing/sysfs-bus-rbd

@@ -57,13 +57,6 @@ create_snap
 
 	 $ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_create
 
-rollback_snap
-
-	Rolls back data to the specified snapshot. This goes over the entire
-	list of rados blocks and sends a rollback command to each.
-
-	 $ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_rollback
-
 snap_*
 
 	A directory per each snapshot

MAINTAINERS

@@ -3101,6 +3101,7 @@ F:	include/linux/hid*
 
 HIGH-RESOLUTION TIMERS, CLOCKEVENTS, DYNTICKS
 M:	Thomas Gleixner <tglx@linutronix.de>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
 S:	Maintained
 F:	Documentation/timers/
 F:	kernel/hrtimer.c
@@ -3610,7 +3611,7 @@ F:	net/irda/
 IRQ SUBSYSTEM
 M:	Thomas Gleixner <tglx@linutronix.de>
 S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git irq/core
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git irq/core
 F:	kernel/irq/
 
 ISAPNP
@@ -4098,7 +4099,7 @@ F:	drivers/hwmon/lm90.c
 LOCKDEP AND LOCKSTAT
 M:	Peter Zijlstra <peterz@infradead.org>
 M:	Ingo Molnar <mingo@redhat.com>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git core/locking
 S:	Maintained
 F:	Documentation/lockdep*.txt
 F:	Documentation/lockstat.txt
@@ -4280,7 +4281,9 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:	Maintained
 F:	Documentation/dvb/
 F:	Documentation/video4linux/
+F:	Documentation/DocBook/media/
 F:	drivers/media/
+F:	drivers/staging/media/
 F:	include/media/
 F:	include/linux/dvb/
 F:	include/linux/videodev*.h
@@ -5086,6 +5089,7 @@ M:	Peter Zijlstra <a.p.zijlstra@chello.nl>
 M:	Paul Mackerras <paulus@samba.org>
 M:	Ingo Molnar <mingo@elte.hu>
 M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
 S:	Supported
 F:	kernel/events/*
 F:	include/linux/perf_event.h
@@ -5165,6 +5169,7 @@ F:	drivers/scsi/pm8001/
 
 POSIX CLOCKS and TIMERS
 M:	Thomas Gleixner <tglx@linutronix.de>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
 S:	Supported
 F:	fs/timerfd.c
 F:	include/linux/timer*
@@ -5680,6 +5685,7 @@ F:	drivers/dma/dw_dmac.c
 TIMEKEEPING, NTP
 M:	John Stultz <johnstul@us.ibm.com>
 M:	Thomas Gleixner <tglx@linutronix.de>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core
 S:	Supported
 F:	include/linux/clocksource.h
 F:	include/linux/time.h
@@ -5704,6 +5710,7 @@ F:	drivers/watchdog/sc1200wdt.c
 SCHEDULER
 M:	Ingo Molnar <mingo@elte.hu>
 M:	Peter Zijlstra <peterz@infradead.org>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git sched/core
 S:	Maintained
 F:	kernel/sched*
 F:	include/linux/sched.h
@@ -6631,7 +6638,7 @@ TRACING
 M:	Steven Rostedt <rostedt@goodmis.org>
 M:	Frederic Weisbecker <fweisbec@gmail.com>
 M:	Ingo Molnar <mingo@redhat.com>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git perf/core
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git perf/core
 S:	Maintained
 F:	Documentation/trace/ftrace.txt
 F:	arch/*/*/*/ftrace.h
@@ -7381,7 +7388,7 @@ M:	Thomas Gleixner <tglx@linutronix.de>
 M:	Ingo Molnar <mingo@redhat.com>
 M:	"H. Peter Anvin" <hpa@zytor.com>
 M:	x86@kernel.org
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git x86/core
 S:	Maintained
 F:	Documentation/x86/
 F:	arch/x86/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 2
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc7
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/arm/Kconfig

@@ -220,8 +220,9 @@ config NEED_MACH_MEMORY_H
 	  be avoided when possible.
 
 config PHYS_OFFSET
-	hex "Physical address of main memory"
+	hex "Physical address of main memory" if MMU
 	depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H
+	default DRAM_BASE if !MMU
 	help
 	  Please provide the physical address corresponding to the
 	  location of main memory in your system.

arch/arm/include/asm/unwind.h

@@ -30,14 +30,15 @@ enum unwind_reason_code {
 };
 
 struct unwind_idx {
-	unsigned long addr;
+	unsigned long addr_offset;
 	unsigned long insn;
 };
 
 struct unwind_table {
 	struct list_head list;
-	struct unwind_idx *start;
-	struct unwind_idx *stop;
+	const struct unwind_idx *start;
+	const struct unwind_idx *origin;
+	const struct unwind_idx *stop;
 	unsigned long begin_addr;
 	unsigned long end_addr;
 };
@@ -49,15 +50,6 @@ extern struct unwind_table *unwind_table_add(unsigned long start,
 extern void unwind_table_del(struct unwind_table *tab);
 extern void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk);
 
-#ifdef CONFIG_ARM_UNWIND
-extern int __init unwind_init(void);
-#else
-static inline int __init unwind_init(void)
-{
-	return 0;
-}
-#endif
-
 #endif	/* !__ASSEMBLY__ */
 
 #ifdef CONFIG_ARM_UNWIND

arch/arm/kernel/perf_event.c

@@ -640,6 +640,9 @@ static struct platform_device_id armpmu_plat_device_ids[] = {
 
 static int __devinit armpmu_device_probe(struct platform_device *pdev)
 {
+	if (!cpu_pmu)
+		return -ENODEV;
+
 	cpu_pmu->plat_device = pdev;
 	return 0;
 }

arch/arm/kernel/setup.c

@@ -895,8 +895,6 @@ void __init setup_arch(char **cmdline_p)
 {
 	struct machine_desc *mdesc;
 
-	unwind_init();
-
 	setup_processor();
 	mdesc = setup_machine_fdt(__atags_pointer);
 	if (!mdesc)
@@ -904,6 +902,12 @@ void __init setup_arch(char **cmdline_p)
 	machine_desc = mdesc;
 	machine_name = mdesc->name;
 
+#ifdef CONFIG_ZONE_DMA
+	if (mdesc->dma_zone_size) {
+		extern unsigned long arm_dma_zone_size;
+		arm_dma_zone_size = mdesc->dma_zone_size;
+	}
+#endif
 	if (mdesc->soft_reboot)
 		reboot_setup("s");
 
@@ -934,12 +938,6 @@ void __init setup_arch(char **cmdline_p)
 
 	tcm_init();
 
-#ifdef CONFIG_ZONE_DMA
-	if (mdesc->dma_zone_size) {
-		extern unsigned long arm_dma_zone_size;
-		arm_dma_zone_size = mdesc->dma_zone_size;
-	}
-#endif
 #ifdef CONFIG_MULTI_IRQ_HANDLER
 	handle_arch_irq = mdesc->handle_irq;
 #endif

arch/arm/kernel/unwind.c

@@ -67,7 +67,7 @@ EXPORT_SYMBOL(__aeabi_unwind_cpp_pr2);
 
 struct unwind_ctrl_block {
 	unsigned long vrs[16];		/* virtual register set */
-	unsigned long *insn;		/* pointer to the current instructions word */
+	const unsigned long *insn;	/* pointer to the current instructions word */
 	int entries;			/* number of entries left to interpret */
 	int byte;			/* current byte number in the instructions word */
 };
@@ -83,8 +83,9 @@ enum regs {
 	PC = 15
 };
 
-extern struct unwind_idx __start_unwind_idx[];
-extern struct unwind_idx __stop_unwind_idx[];
+extern const struct unwind_idx __start_unwind_idx[];
+static const struct unwind_idx *__origin_unwind_idx;
+extern const struct unwind_idx __stop_unwind_idx[];
 
 static DEFINE_SPINLOCK(unwind_lock);
 static LIST_HEAD(unwind_tables);
@@ -98,45 +99,99 @@ static LIST_HEAD(unwind_tables);
 })
 
 /*
- * Binary search in the unwind index. The entries entries are
+ * Binary search in the unwind index. The entries are
  * guaranteed to be sorted in ascending order by the linker.
+ *
+ * start = first entry
+ * origin = first entry with positive offset (or stop if there is no such entry)
+ * stop - 1 = last entry
  */
-static struct unwind_idx *search_index(unsigned long addr,
-				       struct unwind_idx *first,
-				       struct unwind_idx *last)
+static const struct unwind_idx *search_index(unsigned long addr,
+				       const struct unwind_idx *start,
+				       const struct unwind_idx *origin,
+				       const struct unwind_idx *stop)
 {
-	pr_debug("%s(%08lx, %p, %p)\n", __func__, addr, first, last);
+	unsigned long addr_prel31;
 
-	if (addr < first->addr) {
-		pr_warning("unwind: Unknown symbol address %08lx\n", addr);
-		return NULL;
-	} else if (addr >= last->addr)
-		return last;
+	pr_debug("%s(%08lx, %p, %p, %p)\n",
+			__func__, addr, start, origin, stop);
 
-	while (first < last - 1) {
-		struct unwind_idx *mid = first + ((last - first + 1) >> 1);
+	/*
+	 * only search in the section with the matching sign. This way the
+	 * prel31 numbers can be compared as unsigned longs.
+	 */
+	if (addr < (unsigned long)start)
+		/* negative offsets: [start; origin) */
+		stop = origin;
+	else
+		/* positive offsets: [origin; stop) */
+		start = origin;
 
-		if (addr < mid->addr)
-			last = mid;
-		else
-			first = mid;
+	/* prel31 for address relavive to start */
+	addr_prel31 = (addr - (unsigned long)start) & 0x7fffffff;
+
+	while (start < stop - 1) {
+		const struct unwind_idx *mid = start + ((stop - start) >> 1);
+
+		/*
+		 * As addr_prel31 is relative to start an offset is needed to
+		 * make it relative to mid.
+		 */
+		if (addr_prel31 - ((unsigned long)mid - (unsigned long)start) <
+				mid->addr_offset)
+			stop = mid;
+		else {
+			/* keep addr_prel31 relative to start */
+			addr_prel31 -= ((unsigned long)mid -
+					(unsigned long)start);
+			start = mid;
+		}
 	}
 
-	return first;
+	if (likely(start->addr_offset <= addr_prel31))
+		return start;
+	else {
+		pr_warning("unwind: Unknown symbol address %08lx\n", addr);
+		return NULL;
+	}
 }
 
-static struct unwind_idx *unwind_find_idx(unsigned long addr)
+static const struct unwind_idx *unwind_find_origin(
+		const struct unwind_idx *start, const struct unwind_idx *stop)
 {
-	struct unwind_idx *idx = NULL;
+	pr_debug("%s(%p, %p)\n", __func__, start, stop);
+	while (start < stop) {
+		const struct unwind_idx *mid = start + ((stop - start) >> 1);
+
+		if (mid->addr_offset >= 0x40000000)
+			/* negative offset */
+			start = mid + 1;
+		else
+			/* positive offset */
+			stop = mid;
+	}
+	pr_debug("%s -> %p\n", __func__, stop);
+	return stop;
+}
+
+static const struct unwind_idx *unwind_find_idx(unsigned long addr)
+{
+	const struct unwind_idx *idx = NULL;
 	unsigned long flags;
 
 	pr_debug("%s(%08lx)\n", __func__, addr);
 
-	if (core_kernel_text(addr))
+	if (core_kernel_text(addr)) {
+		if (unlikely(!__origin_unwind_idx))
+			__origin_unwind_idx =
+				unwind_find_origin(__start_unwind_idx,
+						__stop_unwind_idx);
+
 		/* main unwind table */
 		idx = search_index(addr, __start_unwind_idx,
-				   __stop_unwind_idx - 1);
-	else {
+				   __origin_unwind_idx,
+				   __stop_unwind_idx);
+	} else {
 		/* module unwind tables */
 		struct unwind_table *table;
 
@@ -145,7 +200,8 @@ static struct unwind_idx *unwind_find_idx(unsigned long addr)
 			if (addr >= table->begin_addr &&
 			    addr < table->end_addr) {
 				idx = search_index(addr, table->start,
-						   table->stop - 1);
+						   table->origin,
+						   table->stop);
 				/* Move-to-front to exploit common traces */
 				list_move(&table->list, &unwind_tables);
 				break;
@@ -274,7 +330,7 @@ static int unwind_exec_insn(struct unwind_ctrl_block *ctrl)
 int unwind_frame(struct stackframe *frame)
 {
 	unsigned long high, low;
-	struct unwind_idx *idx;
+	const struct unwind_idx *idx;
 	struct unwind_ctrl_block ctrl;
 
 	/* only go to a higher address on the stack */
@@ -399,7 +455,6 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size,
 				      unsigned long text_size)
 {
 	unsigned long flags;
-	struct unwind_idx *idx;
 	struct unwind_table *tab = kmalloc(sizeof(*tab), GFP_KERNEL);
 
 	pr_debug("%s(%08lx, %08lx, %08lx, %08lx)\n", __func__, start, size,
@@ -408,15 +463,12 @@ struct unwind_table *unwind_table_add(unsigned long start, unsigned long size,
 	if (!tab)
 		return tab;
 
-	tab->start = (struct unwind_idx *)start;
-	tab->stop = (struct unwind_idx *)(start + size);
+	tab->start = (const struct unwind_idx *)start;
+	tab->stop = (const struct unwind_idx *)(start + size);
+	tab->origin = unwind_find_origin(tab->start, tab->stop);
 	tab->begin_addr = text_addr;
 	tab->end_addr = text_addr + text_size;
 
-	/* Convert the symbol addresses to absolute values */
-	for (idx = tab->start; idx < tab->stop; idx++)
-		idx->addr = prel31_to_addr(&idx->addr);
-
 	spin_lock_irqsave(&unwind_lock, flags);
 	list_add_tail(&tab->list, &unwind_tables);
 	spin_unlock_irqrestore(&unwind_lock, flags);
@@ -437,16 +489,3 @@ void unwind_table_del(struct unwind_table *tab)
 
 	kfree(tab);
 }
-
-int __init unwind_init(void)
-{
-	struct unwind_idx *idx;
-
-	/* Convert the symbol addresses to absolute values */
-	for (idx = __start_unwind_idx; idx < __stop_unwind_idx; idx++)
-		idx->addr = prel31_to_addr(&idx->addr);
-
-	pr_debug("unwind: ARM stack unwinding initialised\n");
-
-	return 0;
-}

arch/arm/mach-exynos/mct.c

@@ -44,8 +44,6 @@ struct mct_clock_event_device {
 	char name[10];
 };
 
-static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
-
 static void exynos4_mct_write(unsigned int value, void *addr)
 {
 	void __iomem *stat_addr;
@@ -264,6 +262,9 @@ static void exynos4_clockevent_init(void)
 }
 
 #ifdef CONFIG_LOCAL_TIMERS
+
+static DEFINE_PER_CPU(struct mct_clock_event_device, percpu_mct_tick);
+
 /* Clock event handling */
 static void exynos4_mct_tick_stop(struct mct_clock_event_device *mevt)
 {
@@ -428,9 +429,13 @@ int __cpuinit local_timer_setup(struct clock_event_device *evt)
 
 void local_timer_stop(struct clock_event_device *evt)
 {
+	unsigned int cpu = smp_processor_id();
 	evt->set_mode(CLOCK_EVT_MODE_UNUSED, evt);
 	if (mct_int_type == MCT_INT_SPI)
-		disable_irq(evt->irq);
+		if (cpu == 0)
+			remove_irq(evt->irq, &mct_tick0_event_irq);
+		else
+			remove_irq(evt->irq, &mct_tick1_event_irq);
 	else
 		disable_percpu_irq(IRQ_MCT_LOCALTIMER);
 }
@@ -443,6 +448,7 @@ static void __init exynos4_timer_resources(void)
 
 	clk_rate = clk_get_rate(mct_clk);
 
+#ifdef CONFIG_LOCAL_TIMERS
 	if (mct_int_type == MCT_INT_PPI) {
 		int err;
 
@@ -452,6 +458,7 @@ static void __init exynos4_timer_resources(void)
 		WARN(err, "MCT: can't request IRQ %d (%d)\n",
 		     IRQ_MCT_LOCALTIMER, err);
 	}
+#endif /* CONFIG_LOCAL_TIMERS */
 }
 
 static void __init exynos4_timer_init(void)

arch/arm/mach-mx5/board-mx51_babbage.c

@@ -362,7 +362,7 @@ static void __init mx51_babbage_init(void)
 {
 	iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP;
 	iomux_v3_cfg_t power_key = NEW_PAD_CTRL(MX51_PAD_EIM_A27__GPIO2_21,
-		PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP);
+		PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH);
 
 	imx51_soc_init();
 

arch/arm/mach-mx5/board-mx53_evk.c

@@ -106,7 +106,7 @@ static inline void mx53_evk_fec_reset(void)
 	gpio_set_value(MX53_EVK_FEC_PHY_RST, 1);
 }
 
-static struct fec_platform_data mx53_evk_fec_pdata = {
+static const struct fec_platform_data mx53_evk_fec_pdata __initconst = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 

arch/arm/mach-mx5/board-mx53_loco.c

@@ -242,7 +242,7 @@ static inline void mx53_loco_fec_reset(void)
 	gpio_set_value(LOCO_FEC_PHY_RST, 1);
 }
 
-static struct fec_platform_data mx53_loco_fec_data = {
+static const struct fec_platform_data mx53_loco_fec_data __initconst = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 

arch/arm/mach-mx5/board-mx53_smd.c

@@ -104,7 +104,7 @@ static inline void mx53_smd_fec_reset(void)
 	gpio_set_value(SMD_FEC_PHY_RST, 1);
 }
 
-static struct fec_platform_data mx53_smd_fec_data = {
+static const struct fec_platform_data mx53_smd_fec_data __initconst = {
 	.phy = PHY_INTERFACE_MODE_RMII,
 };
 

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -193,7 +193,7 @@ static struct platform_device rx51_charger_device = {
 static void __init rx51_charger_init(void)
 {
 	WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO,
-		GPIOF_OUT_INIT_LOW, "isp1704_reset"));
+		GPIOF_OUT_INIT_HIGH, "isp1704_reset"));
 
 	platform_device_register(&rx51_charger_device);
 }

arch/arm/mach-omap2/mcbsp.c

@@ -145,6 +145,9 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 		pdata->reg_size = 4;
 		pdata->has_ccr = true;
 	}
+	pdata->set_clk_src = omap2_mcbsp_set_clk_src;
+	if (id == 1)
+		pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
 
 	if (oh->class->rev == MCBSP_CONFIG_TYPE3) {
 		if (id == 2)
@@ -174,9 +177,6 @@ static int omap_init_mcbsp(struct omap_hwmod *oh, void *unused)
 					name, oh->name);
 		return PTR_ERR(pdev);
 	}
-	pdata->set_clk_src = omap2_mcbsp_set_clk_src;
-	if (id == 1)
-		pdata->mux_signal = omap2_mcbsp1_mux_rx_clk;
 	omap_mcbsp_count++;
 	return 0;
 }

arch/arm/mach-s5pv210/mach-smdkv210.c

@@ -273,6 +273,7 @@ static struct samsung_bl_gpio_info smdkv210_bl_gpio_info = {
 
 static struct platform_pwm_backlight_data smdkv210_bl_data = {
 	.pwm_id = 3,
+	.pwm_period_ns = 1000,
 };
 
 static void __init smdkv210_map_io(void)

arch/arm/mach-shmobile/board-ag5evm.c

@@ -607,6 +607,7 @@ struct sys_timer ag5evm_timer = {
 
 MACHINE_START(AG5EVM, "ag5evm")
 	.map_io		= ag5evm_map_io,
+	.nr_irqs	= NR_IRQS_LEGACY,
 	.init_irq	= sh73a0_init_irq,
 	.handle_irq	= shmobile_handle_irq_gic,
 	.init_machine	= ag5evm_init,

arch/arm/mach-shmobile/board-kota2.c

@@ -33,6 +33,7 @@
 #include <linux/input/sh_keysc.h>
 #include <linux/gpio_keys.h>
 #include <linux/leds.h>
+#include <linux/platform_data/leds-renesas-tpu.h>
 #include <linux/mmc/host.h>
 #include <linux/mmc/sh_mmcif.h>
 #include <linux/mfd/tmio.h>
@@ -56,7 +57,7 @@ static struct resource smsc9220_resources[] = {
 		.flags		= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start		= gic_spi(33), /* PINTA2 @ PORT144 */
+		.start		= SH73A0_PINT0_IRQ(2), /* PINTA2 */
 		.flags		= IORESOURCE_IRQ,
 	},
 };
@@ -157,10 +158,6 @@ static struct platform_device gpio_keys_device = {
 #define GPIO_LED(n, g) { .name = n, .gpio = g }
 
 static struct gpio_led gpio_leds[] = {
-	GPIO_LED("V2513", GPIO_PORT153), /* PORT153 [TPU1T02] -> V2513 */
-	GPIO_LED("V2514", GPIO_PORT199), /* PORT199 [TPU4TO1] -> V2514 */
-	GPIO_LED("V2515", GPIO_PORT197), /* PORT197 [TPU2TO1] -> V2515 */
-	GPIO_LED("KEYLED", GPIO_PORT163), /* PORT163 [TPU3TO0] -> KEYLED */
 	GPIO_LED("G", GPIO_PORT20), /* PORT20 [GPO0] -> LED7 -> "G" */
 	GPIO_LED("H", GPIO_PORT21), /* PORT21 [GPO1] -> LED8 -> "H" */
 	GPIO_LED("J", GPIO_PORT22), /* PORT22 [GPO2] -> LED9 -> "J" */
@@ -179,6 +176,119 @@ static struct platform_device gpio_leds_device = {
 	},
 };
 
+/* TPU LED */
+static struct led_renesas_tpu_config led_renesas_tpu12_pdata = {
+	.name		= "V2513",
+	.pin_gpio_fn	= GPIO_FN_TPU1TO2,
+	.pin_gpio	= GPIO_PORT153,
+	.channel_offset = 0x90,
+	.timer_bit = 2,
+	.max_brightness = 1000,
+};
+
+static struct resource tpu12_resources[] = {
+	[0] = {
+		.name	= "TPU12",
+		.start	= 0xe6610090,
+		.end	= 0xe66100b5,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device leds_tpu12_device = {
+	.name = "leds-renesas-tpu",
+	.id = 12,
+	.dev = {
+		.platform_data  = &led_renesas_tpu12_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(tpu12_resources),
+	.resource	= tpu12_resources,
+};
+
+static struct led_renesas_tpu_config led_renesas_tpu41_pdata = {
+	.name		= "V2514",
+	.pin_gpio_fn	= GPIO_FN_TPU4TO1,
+	.pin_gpio	= GPIO_PORT199,
+	.channel_offset = 0x50,
+	.timer_bit = 1,
+	.max_brightness = 1000,
+};
+
+static struct resource tpu41_resources[] = {
+	[0] = {
+		.name	= "TPU41",
+		.start	= 0xe6640050,
+		.end	= 0xe6640075,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device leds_tpu41_device = {
+	.name = "leds-renesas-tpu",
+	.id = 41,
+	.dev = {
+		.platform_data  = &led_renesas_tpu41_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(tpu41_resources),
+	.resource	= tpu41_resources,
+};
+
+static struct led_renesas_tpu_config led_renesas_tpu21_pdata = {
+	.name		= "V2515",
+	.pin_gpio_fn	= GPIO_FN_TPU2TO1,
+	.pin_gpio	= GPIO_PORT197,
+	.channel_offset = 0x50,
+	.timer_bit = 1,
+	.max_brightness = 1000,
+};
+
+static struct resource tpu21_resources[] = {
+	[0] = {
+		.name	= "TPU21",
+		.start	= 0xe6620050,
+		.end	= 0xe6620075,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device leds_tpu21_device = {
+	.name = "leds-renesas-tpu",
+	.id = 21,
+	.dev = {
+		.platform_data  = &led_renesas_tpu21_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(tpu21_resources),
+	.resource	= tpu21_resources,
+};
+
+static struct led_renesas_tpu_config led_renesas_tpu30_pdata = {
+	.name		= "KEYLED",
+	.pin_gpio_fn	= GPIO_FN_TPU3TO0,
+	.pin_gpio	= GPIO_PORT163,
+	.channel_offset = 0x10,
+	.timer_bit = 0,
+	.max_brightness = 1000,
+};
+
+static struct resource tpu30_resources[] = {
+	[0] = {
+		.name	= "TPU30",
+		.start	= 0xe6630010,
+		.end	= 0xe6630035,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device leds_tpu30_device = {
+	.name = "leds-renesas-tpu",
+	.id = 30,
+	.dev = {
+		.platform_data  = &led_renesas_tpu30_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(tpu30_resources),
+	.resource	= tpu30_resources,
+};
+
 /* MMCIF */
 static struct resource mmcif_resources[] = {
 	[0] = {
@@ -291,6 +401,10 @@ static struct platform_device *kota2_devices[] __initdata = {
 	&keysc_device,
 	&gpio_keys_device,
 	&gpio_leds_device,
+	&leds_tpu12_device,
+	&leds_tpu41_device,
+	&leds_tpu21_device,
+	&leds_tpu30_device,
 	&mmcif_device,
 	&sdhi0_device,
 	&sdhi1_device,
@@ -317,18 +431,6 @@ static void __init kota2_map_io(void)
 	shmobile_setup_console();
 }
 
-#define PINTER0A	0xe69000a0
-#define PINTCR0A	0xe69000b0
-
-void __init kota2_init_irq(void)
-{
-	sh73a0_init_irq();
-
-	/* setup PINT: enable PINTA2 as active low */
-	__raw_writel(1 << 29, PINTER0A);
-	__raw_writew(2 << 10, PINTCR0A);
-}
-
 static void __init kota2_init(void)
 {
 	sh73a0_pinmux_init();
@@ -447,7 +549,8 @@ struct sys_timer kota2_timer = {
 
 MACHINE_START(KOTA2, "kota2")
 	.map_io		= kota2_map_io,
-	.init_irq	= kota2_init_irq,
+	.nr_irqs	= NR_IRQS_LEGACY,
+	.init_irq	= sh73a0_init_irq,
 	.handle_irq	= shmobile_handle_irq_gic,
 	.init_machine	= kota2_init,
 	.timer		= &kota2_timer,

arch/arm/mach-shmobile/clock-sh73a0.c

@@ -113,6 +113,12 @@ static struct clk main_clk = {
 	.ops		= &main_clk_ops,
 };
 
+/* Divide Main clock by two */
+static struct clk main_div2_clk = {
+	.ops		= &div2_clk_ops,
+	.parent		= &main_clk,
+};
+
 /* PLL0, PLL1, PLL2, PLL3 */
 static unsigned long pll_recalc(struct clk *clk)
 {
@@ -181,6 +187,7 @@ static struct clk *main_clks[] = {
 	&extal1_div2_clk,
 	&extal2_div2_clk,
 	&main_clk,
+	&main_div2_clk,
 	&pll0_clk,
 	&pll1_clk,
 	&pll2_clk,
@@ -243,7 +250,7 @@ static struct clk div6_clks[DIV6_NR] = {
 	[DIV6_VCK1] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR1, 0),
 	[DIV6_VCK2] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR2, 0),
 	[DIV6_VCK3] = SH_CLK_DIV6(&pll1_div2_clk, VCLKCR3, 0),
-	[DIV6_ZB1] = SH_CLK_DIV6(&pll1_div2_clk, ZBCKCR, 0),
+	[DIV6_ZB1] = SH_CLK_DIV6(&pll1_div2_clk, ZBCKCR, CLK_ENABLE_ON_INIT),
 	[DIV6_FLCTL] = SH_CLK_DIV6(&pll1_div2_clk, FLCKCR, 0),
 	[DIV6_SDHI0] = SH_CLK_DIV6(&pll1_div2_clk, SD0CKCR, 0),
 	[DIV6_SDHI1] = SH_CLK_DIV6(&pll1_div2_clk, SD1CKCR, 0),
@@ -268,6 +275,7 @@ enum { MSTP001,
 	MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
 	MSTP331, MSTP329, MSTP325, MSTP323, MSTP318,
 	MSTP314, MSTP313, MSTP312, MSTP311,
+	MSTP303, MSTP302, MSTP301, MSTP300,
 	MSTP411, MSTP410, MSTP403,
 	MSTP_NR };
 
@@ -301,6 +309,10 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */
 	[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */
 	[MSTP311] = MSTP(&div6_clks[DIV6_SDHI2], SMSTPCR3, 11, 0), /* SDHI2 */
+	[MSTP303] = MSTP(&main_div2_clk, SMSTPCR3, 3, 0), /* TPU1 */
+	[MSTP302] = MSTP(&main_div2_clk, SMSTPCR3, 2, 0), /* TPU2 */
+	[MSTP301] = MSTP(&main_div2_clk, SMSTPCR3, 1, 0), /* TPU3 */
+	[MSTP300] = MSTP(&main_div2_clk, SMSTPCR3, 0, 0), /* TPU4 */
 	[MSTP411] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 11, 0), /* IIC3 */
 	[MSTP410] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 10, 0), /* IIC4 */
 	[MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
@@ -350,6 +362,10 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
 	CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */
+	CLKDEV_DEV_ID("leds-renesas-tpu.12", &mstp_clks[MSTP303]), /* TPU1 */
+	CLKDEV_DEV_ID("leds-renesas-tpu.21", &mstp_clks[MSTP302]), /* TPU2 */
+	CLKDEV_DEV_ID("leds-renesas-tpu.30", &mstp_clks[MSTP301]), /* TPU3 */
+	CLKDEV_DEV_ID("leds-renesas-tpu.41", &mstp_clks[MSTP300]), /* TPU4 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* I2C3 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* I2C4 */
 	CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */

arch/arm/plat-mxc/cpufreq.c

@@ -17,6 +17,7 @@
  * the CPU clock speed on the fly.
  */
 
+#include <linux/module.h>
 #include <linux/cpufreq.h>
 #include <linux/clk.h>
 #include <linux/err.h>

arch/arm/plat-mxc/pwm.c

@@ -32,6 +32,9 @@
 #define MX3_PWMSAR                0x0C    /* PWM Sample Register */
 #define MX3_PWMPR                 0x10    /* PWM Period Register */
 #define MX3_PWMCR_PRESCALER(x)    (((x - 1) & 0xFFF) << 4)
+#define MX3_PWMCR_DOZEEN                (1 << 24)
+#define MX3_PWMCR_WAITEN                (1 << 23)
+#define MX3_PWMCR_DBGEN			(1 << 22)
 #define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
 #define MX3_PWMCR_CLKSRC_IPG      (1 << 16)
 #define MX3_PWMCR_EN              (1 << 0)
@@ -77,7 +80,9 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 		writel(duty_cycles, pwm->mmio_base + MX3_PWMSAR);
 		writel(period_cycles, pwm->mmio_base + MX3_PWMPR);
 
-		cr = MX3_PWMCR_PRESCALER(prescale) | MX3_PWMCR_EN;
+		cr = MX3_PWMCR_PRESCALER(prescale) |
+			MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
+			MX3_PWMCR_DBGEN | MX3_PWMCR_EN;
 
 		if (cpu_is_mx25())
 			cr |= MX3_PWMCR_CLKSRC_IPG;

arch/arm/plat-samsung/dev-backlight.c

@@ -15,7 +15,6 @@
 #include <linux/slab.h>
 #include <linux/io.h>
 #include <linux/pwm_backlight.h>
-#include <linux/slab.h>
 
 #include <plat/devs.h>
 #include <plat/gpio-cfg.h>

arch/s390/oprofile/init.c

@@ -88,7 +88,7 @@ static ssize_t hwsampler_write(struct file *file, char const __user *buf,
 		return -EINVAL;
 
 	retval = oprofilefs_ulong_from_user(&val, buf, count);
-	if (retval)
+	if (retval <= 0)
 		return retval;
 
 	if (oprofile_started)

arch/sh/boards/board-sh7757lcr.c

@@ -50,9 +50,9 @@ static struct platform_device heartbeat_device = {
 #define GBECONT		0xffc10100
 #define GBECONT_RMII1	BIT(17)
 #define GBECONT_RMII0	BIT(16)
-static void sh7757_eth_set_mdio_gate(unsigned long addr)
+static void sh7757_eth_set_mdio_gate(void *addr)
 {
-	if ((addr & 0x00000fff) < 0x0800)
+	if (((unsigned long)addr & 0x00000fff) < 0x0800)
 		writel(readl(GBECONT) | GBECONT_RMII0, GBECONT);
 	else
 		writel(readl(GBECONT) | GBECONT_RMII1, GBECONT);
@@ -116,9 +116,9 @@ static struct platform_device sh7757_eth1_device = {
 	},
 };
 
-static void sh7757_eth_giga_set_mdio_gate(unsigned long addr)
+static void sh7757_eth_giga_set_mdio_gate(void *addr)
 {
-	if ((addr & 0x00000fff) < 0x0800) {
+	if (((unsigned long)addr & 0x00000fff) < 0x0800) {
 		gpio_set_value(GPIO_PTT4, 1);
 		writel(readl(GBECONT) & ~GBECONT_RMII0, GBECONT);
 	} else {
@@ -210,8 +210,12 @@ static struct resource sh_mmcif_resources[] = {
 };
 
 static struct sh_mmcif_dma sh7757lcr_mmcif_dma = {
-	.chan_priv_tx	= SHDMA_SLAVE_MMCIF_TX,
-	.chan_priv_rx	= SHDMA_SLAVE_MMCIF_RX,
+	.chan_priv_tx	= {
+		.slave_id = SHDMA_SLAVE_MMCIF_TX,
+	},
+	.chan_priv_rx	= {
+		.slave_id = SHDMA_SLAVE_MMCIF_RX,
+	}
 };
 
 static struct sh_mmcif_plat_data sh_mmcif_plat = {

arch/sparc/kernel/ds.c

@@ -1181,13 +1181,11 @@ static int __devinit ds_probe(struct vio_dev *vdev,
 
 	dp->rcv_buf_len = 4096;
 
-	dp->ds_states = kzalloc(sizeof(ds_states_template),
-				GFP_KERNEL);
+	dp->ds_states = kmemdup(ds_states_template,
+				sizeof(ds_states_template), GFP_KERNEL);
 	if (!dp->ds_states)
 		goto out_free_rcv_buf;
 
-	memcpy(dp->ds_states, ds_states_template,
-	       sizeof(ds_states_template));
 	dp->num_ds_states = ARRAY_SIZE(ds_states_template);
 
 	for (i = 0; i < dp->num_ds_states; i++)

arch/sparc/kernel/pci_sun4v.c

@@ -849,10 +849,10 @@ static int pci_sun4v_msiq_build_irq(struct pci_pbm_info *pbm,
 	if (!irq)
 		return -ENOMEM;
 
-	if (pci_sun4v_msiq_setstate(pbm->devhandle, msiqid, HV_MSIQSTATE_IDLE))
-		return -EINVAL;
 	if (pci_sun4v_msiq_setvalid(pbm->devhandle, msiqid, HV_MSIQ_VALID))
 		return -EINVAL;
+	if (pci_sun4v_msiq_setstate(pbm->devhandle, msiqid, HV_MSIQSTATE_IDLE))
+		return -EINVAL;
 
 	return irq;
 }

arch/sparc/kernel/prom_common.c

@@ -58,12 +58,10 @@ int of_set_property(struct device_node *dp, const char *name, void *val, int len
 	void *new_val;
 	int err;
 
-	new_val = kmalloc(len, GFP_KERNEL);
+	new_val = kmemdup(val, len, GFP_KERNEL);
 	if (!new_val)
 		return -ENOMEM;
 
-	memcpy(new_val, val, len);
-
 	err = -ENODEV;
 
 	mutex_lock(&of_set_property_mutex);

arch/sparc/mm/btfixup.c

@@ -302,8 +302,7 @@ void __init btfixup(void)
 				case 'i':	/* INT */
 					if ((insn & 0xc1c00000) == 0x01000000) /* %HI */
 						set_addr(addr, q[1], fmangled, (insn & 0xffc00000) | (p[1] >> 10));
-					else if ((insn & 0x80002000) == 0x80002000 &&
-					         (insn & 0x01800000) != 0x01800000) /* %LO */
+					else if ((insn & 0x80002000) == 0x80002000) /* %LO */
 						set_addr(addr, q[1], fmangled, (insn & 0xffffe000) | (p[1] & 0x3ff));
 					else {
 						prom_printf(insn_i, p, addr, insn);

arch/x86/include/asm/e820.h

@@ -53,13 +53,6 @@
  */
 #define E820_RESERVED_KERN        128
 
-/*
- * Address ranges that need to be mapped by the kernel direct
- * mapping. This is used to make sure regions such as
- * EFI_RUNTIME_SERVICES_DATA are directly mapped. See setup_arch().
- */
-#define E820_RESERVED_EFI         129
-
 #ifndef __ASSEMBLY__
 #include <linux/types.h>
 struct e820entry {
@@ -122,7 +115,6 @@ static inline void early_memtest(unsigned long start, unsigned long end)
 }
 #endif
 
-extern unsigned long e820_end_pfn(unsigned long limit_pfn, unsigned type);
 extern unsigned long e820_end_of_ram_pfn(void);
 extern unsigned long e820_end_of_low_ram_pfn(void);
 extern u64 early_reserve_e820(u64 startt, u64 sizet, u64 align);

arch/x86/include/asm/efi.h

@@ -33,6 +33,8 @@ extern unsigned long asmlinkage efi_call_phys(void *, ...);
 #define efi_call_virt6(f, a1, a2, a3, a4, a5, a6)	\
 	efi_call_virt(f, a1, a2, a3, a4, a5, a6)
 
+#define efi_ioremap(addr, size, type)		ioremap_cache(addr, size)
+
 #else /* !CONFIG_X86_32 */
 
 extern u64 efi_call0(void *fp);
@@ -82,6 +84,9 @@ extern u64 efi_call6(void *fp, u64 arg1, u64 arg2, u64 arg3,
 	efi_call6((void *)(efi.systab->runtime->f), (u64)(a1), (u64)(a2), \
 		  (u64)(a3), (u64)(a4), (u64)(a5), (u64)(a6))
 
+extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size,
+				 u32 type);
+
 #endif /* CONFIG_X86_32 */
 
 extern int add_efi_memmap;

arch/x86/kernel/dumpstack_32.c

@@ -116,16 +116,16 @@ void show_registers(struct pt_regs *regs)
 		for (i = 0; i < code_len; i++, ip++) {
 			if (ip < (u8 *)PAGE_OFFSET ||
 					probe_kernel_address(ip, c)) {
-				printk(" Bad EIP value.");
+				printk(KERN_CONT " Bad EIP value.");
 				break;
 			}
 			if (ip == (u8 *)regs->ip)
-				printk("<%02x> ", c);
+				printk(KERN_CONT "<%02x> ", c);
 			else
-				printk("%02x ", c);
+				printk(KERN_CONT "%02x ", c);
 		}
 	}
-	printk("\n");
+	printk(KERN_CONT "\n");
 }
 
 int is_valid_bugaddr(unsigned long ip)

arch/x86/kernel/dumpstack_64.c

@@ -284,16 +284,16 @@ void show_registers(struct pt_regs *regs)
 		for (i = 0; i < code_len; i++, ip++) {
 			if (ip < (u8 *)PAGE_OFFSET ||
 					probe_kernel_address(ip, c)) {
-				printk(" Bad RIP value.");
+				printk(KERN_CONT " Bad RIP value.");
 				break;
 			}
 			if (ip == (u8 *)regs->ip)
-				printk("<%02x> ", c);
+				printk(KERN_CONT "<%02x> ", c);
 			else
-				printk("%02x ", c);
+				printk(KERN_CONT "%02x ", c);
 		}
 	}
-	printk("\n");
+	printk(KERN_CONT "\n");
 }
 
 int is_valid_bugaddr(unsigned long ip)

arch/x86/kernel/e820.c

@@ -135,7 +135,6 @@ static void __init e820_print_type(u32 type)
 		printk(KERN_CONT "(usable)");
 		break;
 	case E820_RESERVED:
-	case E820_RESERVED_EFI:
 		printk(KERN_CONT "(reserved)");
 		break;
 	case E820_ACPI:
@@ -784,7 +783,7 @@ u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align)
 /*
  * Find the highest page frame number we have available
  */
-unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type)
+static unsigned long __init e820_end_pfn(unsigned long limit_pfn, unsigned type)
 {
 	int i;
 	unsigned long last_pfn = 0;

arch/x86/kernel/setup.c

@@ -691,8 +691,6 @@ early_param("reservelow", parse_reservelow);
 
 void __init setup_arch(char **cmdline_p)
 {
-	unsigned long end_pfn;
-
 #ifdef CONFIG_X86_32
 	memcpy(&boot_cpu_data, &new_cpu_data, sizeof(new_cpu_data));
 	visws_early_detect();
@@ -934,24 +932,7 @@ void __init setup_arch(char **cmdline_p)
 	init_gbpages();
 
 	/* max_pfn_mapped is updated here */
-	end_pfn = max_low_pfn;
-
-#ifdef CONFIG_X86_64
-	/*
-	 * There may be regions after the last E820_RAM region that we
-	 * want to include in the kernel direct mapping, such as
-	 * EFI_RUNTIME_SERVICES_DATA.
-	 */
-	if (efi_enabled) {
-		unsigned long efi_end;
-
-		efi_end = e820_end_pfn(MAXMEM>>PAGE_SHIFT, E820_RESERVED_EFI);
-		if (efi_end > max_low_pfn)
-			end_pfn = efi_end;
-	}
-#endif
-
-	max_low_pfn_mapped = init_memory_mapping(0, end_pfn << PAGE_SHIFT);
+	max_low_pfn_mapped = init_memory_mapping(0, max_low_pfn<<PAGE_SHIFT);
 	max_pfn_mapped = max_low_pfn_mapped;
 
 #ifdef CONFIG_X86_64

arch/x86/net/bpf_jit_comp.c

@@ -568,8 +568,8 @@ cond_branch:			f_offset = addrs[i + filter[i].jf] - addrs[i];
 					break;
 				}
 				if (filter[i].jt != 0) {
-					if (filter[i].jf)
-						t_offset += is_near(f_offset) ? 2 : 6;
+					if (filter[i].jf && f_offset)
+						t_offset += is_near(f_offset) ? 2 : 5;
 					EMIT_COND_JMP(t_op, t_offset);
 					if (filter[i].jf)
 						EMIT_JMP(f_offset);

arch/x86/platform/efi/efi.c

@@ -323,13 +323,10 @@ static void __init do_add_efi_memmap(void)
 		case EFI_UNUSABLE_MEMORY:
 			e820_type = E820_UNUSABLE;
 			break;
-		case EFI_RUNTIME_SERVICES_DATA:
-			e820_type = E820_RESERVED_EFI;
-			break;
 		default:
 			/*
 			 * EFI_RESERVED_TYPE EFI_RUNTIME_SERVICES_CODE
-			 * EFI_MEMORY_MAPPED_IO
+			 * EFI_RUNTIME_SERVICES_DATA EFI_MEMORY_MAPPED_IO
 			 * EFI_MEMORY_MAPPED_IO_PORT_SPACE EFI_PAL_CODE
 			 */
 			e820_type = E820_RESERVED;
@@ -674,21 +671,10 @@ void __init efi_enter_virtual_mode(void)
 		end_pfn = PFN_UP(end);
 		if (end_pfn <= max_low_pfn_mapped
 		    || (end_pfn > (1UL << (32 - PAGE_SHIFT))
-			&& end_pfn <= max_pfn_mapped)) {
+			&& end_pfn <= max_pfn_mapped))
 			va = __va(md->phys_addr);
-
-			if (!(md->attribute & EFI_MEMORY_WB)) {
-				addr = (u64) (unsigned long)va;
-				npages = md->num_pages;
-				memrange_efi_to_native(&addr, &npages);
-				set_memory_uc(addr, npages);
-			}
-		} else {
-			if (!(md->attribute & EFI_MEMORY_WB))
-				va = ioremap_nocache(md->phys_addr, size);
-			else
-				va = ioremap_cache(md->phys_addr, size);
-		}
+		else
+			va = efi_ioremap(md->phys_addr, size, md->type);
 
 		md->virt_addr = (u64) (unsigned long) va;
 
@@ -698,6 +684,13 @@ void __init efi_enter_virtual_mode(void)
 			continue;
 		}
 
+		if (!(md->attribute & EFI_MEMORY_WB)) {
+			addr = md->virt_addr;
+			npages = md->num_pages;
+			memrange_efi_to_native(&addr, &npages);
+			set_memory_uc(addr, npages);
+		}
+
 		systab = (u64) (unsigned long) efi_phys.systab;
 		if (md->phys_addr <= systab && systab < end) {
 			systab += md->virt_addr - md->phys_addr;

arch/x86/platform/efi/efi_32.c

@@ -39,43 +39,14 @@
  */
 
 static unsigned long efi_rt_eflags;
-static pgd_t efi_bak_pg_dir_pointer[2];
 
 void efi_call_phys_prelog(void)
 {
-	unsigned long cr4;
-	unsigned long temp;
 	struct desc_ptr gdt_descr;
 
 	local_irq_save(efi_rt_eflags);
 
-	/*
-	 * If I don't have PAE, I should just duplicate two entries in page
-	 * directory. If I have PAE, I just need to duplicate one entry in
-	 * page directory.
-	 */
-	cr4 = read_cr4_safe();
-
-	if (cr4 & X86_CR4_PAE) {
-		efi_bak_pg_dir_pointer[0].pgd =
-		    swapper_pg_dir[pgd_index(0)].pgd;
-		swapper_pg_dir[0].pgd =
-		    swapper_pg_dir[pgd_index(PAGE_OFFSET)].pgd;
-	} else {
-		efi_bak_pg_dir_pointer[0].pgd =
-		    swapper_pg_dir[pgd_index(0)].pgd;
-		efi_bak_pg_dir_pointer[1].pgd =
-		    swapper_pg_dir[pgd_index(0x400000)].pgd;
-		swapper_pg_dir[pgd_index(0)].pgd =
-		    swapper_pg_dir[pgd_index(PAGE_OFFSET)].pgd;
-		temp = PAGE_OFFSET + 0x400000;
-		swapper_pg_dir[pgd_index(0x400000)].pgd =
-		    swapper_pg_dir[pgd_index(temp)].pgd;
-	}
-
-	/*
-	 * After the lock is released, the original page table is restored.
-	 */
+	load_cr3(initial_page_table);
 	__flush_tlb_all();
 
 	gdt_descr.address = __pa(get_cpu_gdt_table(0));
@@ -85,28 +56,13 @@ void efi_call_phys_prelog(void)
 
 void efi_call_phys_epilog(void)
 {
-	unsigned long cr4;
 	struct desc_ptr gdt_descr;
 
 	gdt_descr.address = (unsigned long)get_cpu_gdt_table(0);
 	gdt_descr.size = GDT_SIZE - 1;
 	load_gdt(&gdt_descr);
 
-	cr4 = read_cr4_safe();
-
-	if (cr4 & X86_CR4_PAE) {
-		swapper_pg_dir[pgd_index(0)].pgd =
-		    efi_bak_pg_dir_pointer[0].pgd;
-	} else {
-		swapper_pg_dir[pgd_index(0)].pgd =
-		    efi_bak_pg_dir_pointer[0].pgd;
-		swapper_pg_dir[pgd_index(0x400000)].pgd =
-		    efi_bak_pg_dir_pointer[1].pgd;
-	}
-
-	/*
-	 * After the lock is released, the original page table is restored.
-	 */
+	load_cr3(swapper_pg_dir);
 	__flush_tlb_all();
 
 	local_irq_restore(efi_rt_eflags);

arch/x86/platform/efi/efi_64.c

@@ -80,3 +80,20 @@ void __init efi_call_phys_epilog(void)
 	local_irq_restore(efi_flags);
 	early_code_mapping_set_exec(0);
 }
+
+void __iomem *__init efi_ioremap(unsigned long phys_addr, unsigned long size,
+				 u32 type)
+{
+	unsigned long last_map_pfn;
+
+	if (type == EFI_MEMORY_MAPPED_IO)
+		return ioremap(phys_addr, size);
+
+	last_map_pfn = init_memory_mapping(phys_addr, phys_addr + size);
+	if ((last_map_pfn << PAGE_SHIFT) < phys_addr + size) {
+		unsigned long top = last_map_pfn << PAGE_SHIFT;
+		efi_ioremap(top, size - (top - phys_addr), type);
+	}
+
+	return (void __iomem *)__va(phys_addr);
+}

arch/x86/xen/setup.c

@@ -173,9 +173,21 @@ static unsigned long __init xen_get_max_pages(void)
 	domid_t domid = DOMID_SELF;
 	int ret;
 
-	ret = HYPERVISOR_memory_op(XENMEM_maximum_reservation, &domid);
-	if (ret > 0)
-		max_pages = ret;
+	/*
+	 * For the initial domain we use the maximum reservation as
+	 * the maximum page.
+	 *
+	 * For guest domains the current maximum reservation reflects
+	 * the current maximum rather than the static maximum. In this
+	 * case the e820 map provided to us will cover the static
+	 * maximum region.
+	 */
+	if (xen_initial_domain()) {
+		ret = HYPERVISOR_memory_op(XENMEM_maximum_reservation, &domid);
+		if (ret > 0)
+			max_pages = ret;
+	}
+
 	return min(max_pages, MAX_DOMAIN_PAGES);
 }
 

block/blk-core.c

@@ -366,7 +366,14 @@ void blk_drain_queue(struct request_queue *q, bool drain_all)
 		if (drain_all)
 			blk_throtl_drain(q);
 
-		__blk_run_queue(q);
+		/*
+		 * This function might be called on a queue which failed
+		 * driver init after queue creation.  Some drivers
+		 * (e.g. fd) get unhappy in such cases.  Kick queue iff
+		 * dispatch queue has something on it.
+		 */
+		if (!list_empty(&q->queue_head))
+			__blk_run_queue(q);
 
 		if (drain_all)
 			nr_rqs = q->rq.count[0] + q->rq.count[1];
@@ -467,6 +474,7 @@ struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id)
 	q->backing_dev_info.state = 0;
 	q->backing_dev_info.capabilities = BDI_CAP_MAP_COPY;
 	q->backing_dev_info.name = "block";
+	q->node = node_id;
 
 	err = bdi_init(&q->backing_dev_info);
 	if (err) {
@@ -551,7 +559,7 @@ blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id)
 	if (!uninit_q)
 		return NULL;
 
-	q = blk_init_allocated_queue_node(uninit_q, rfn, lock, node_id);
+	q = blk_init_allocated_queue(uninit_q, rfn, lock);
 	if (!q)
 		blk_cleanup_queue(uninit_q);
 
@@ -562,19 +570,10 @@ EXPORT_SYMBOL(blk_init_queue_node);
 struct request_queue *
 blk_init_allocated_queue(struct request_queue *q, request_fn_proc *rfn,
 			 spinlock_t *lock)
-{
-	return blk_init_allocated_queue_node(q, rfn, lock, -1);
-}
-EXPORT_SYMBOL(blk_init_allocated_queue);
-
-struct request_queue *
-blk_init_allocated_queue_node(struct request_queue *q, request_fn_proc *rfn,
-			      spinlock_t *lock, int node_id)
 {
 	if (!q)
 		return NULL;
 
-	q->node = node_id;
 	if (blk_init_free_list(q))
 		return NULL;
 
@@ -604,7 +603,7 @@ blk_init_allocated_queue_node(struct request_queue *q, request_fn_proc *rfn,
 
 	return NULL;
 }
-EXPORT_SYMBOL(blk_init_allocated_queue_node);
+EXPORT_SYMBOL(blk_init_allocated_queue);
 
 int blk_get_queue(struct request_queue *q)
 {

block/cfq-iosched.c

@@ -3184,7 +3184,7 @@ static int cfq_cic_link(struct cfq_data *cfqd, struct io_context *ioc,
 		}
 	}
 
-	if (ret)
+	if (ret && ret != -EEXIST)
 		printk(KERN_ERR "cfq: cic link failed!\n");
 
 	return ret;
@@ -3200,6 +3200,7 @@ cfq_get_io_context(struct cfq_data *cfqd, gfp_t gfp_mask)
 {
 	struct io_context *ioc = NULL;
 	struct cfq_io_context *cic;
+	int ret;
 
 	might_sleep_if(gfp_mask & __GFP_WAIT);
 
@@ -3207,6 +3208,7 @@ cfq_get_io_context(struct cfq_data *cfqd, gfp_t gfp_mask)
 	if (!ioc)
 		return NULL;
 
+retry:
 	cic = cfq_cic_lookup(cfqd, ioc);
 	if (cic)
 		goto out;
@@ -3215,7 +3217,12 @@ cfq_get_io_context(struct cfq_data *cfqd, gfp_t gfp_mask)
 	if (cic == NULL)
 		goto err;
 
-	if (cfq_cic_link(cfqd, ioc, cic, gfp_mask))
+	ret = cfq_cic_link(cfqd, ioc, cic, gfp_mask);
+	if (ret == -EEXIST) {
+		/* someone has linked cic to ioc already */
+		cfq_cic_free(cic);
+		goto retry;
+	} else if (ret)
 		goto err_free;
 
 out:
@@ -4036,6 +4043,11 @@ static void *cfq_init_queue(struct request_queue *q)
 
 	if (blkio_alloc_blkg_stats(&cfqg->blkg)) {
 		kfree(cfqg);
+
+		spin_lock(&cic_index_lock);
+		ida_remove(&cic_index_ida, cfqd->cic_index);
+		spin_unlock(&cic_index_lock);
+
 		kfree(cfqd);
 		return NULL;
 	}

drivers/ata/Kconfig

@@ -820,7 +820,7 @@ config PATA_PLATFORM
 
 config PATA_OF_PLATFORM
 	tristate "OpenFirmware platform device PATA support"
-	depends on PATA_PLATFORM && OF
+	depends on PATA_PLATFORM && OF && OF_IRQ
 	help
 	  This option enables support for generic directly connected ATA
 	  devices commonly found on embedded systems with OpenFirmware

drivers/block/cciss.c

@@ -2601,6 +2601,8 @@ static int fill_cmd(ctlr_info_t *h, CommandList_struct *c, __u8 cmd, void *buff,
 			c->Request.Timeout = 0;
 			c->Request.CDB[0] = BMIC_WRITE;
 			c->Request.CDB[6] = BMIC_CACHE_FLUSH;
+			c->Request.CDB[7] = (size >> 8) & 0xFF;
+			c->Request.CDB[8] = size & 0xFF;
 			break;
 		case TEST_UNIT_READY:
 			c->Request.CDBLen = 6;
@@ -4880,7 +4882,7 @@ static int cciss_request_irq(ctlr_info_t *h,
 {
 	if (h->msix_vector || h->msi_vector) {
 		if (!request_irq(h->intr[h->intr_mode], msixhandler,
-				IRQF_DISABLED, h->devname, h))
+				0, h->devname, h))
 			return 0;
 		dev_err(&h->pdev->dev, "Unable to get msi irq %d"
 			" for %s\n", h->intr[h->intr_mode],
@@ -4889,7 +4891,7 @@ static int cciss_request_irq(ctlr_info_t *h,
 	}
 
 	if (!request_irq(h->intr[h->intr_mode], intxhandler,
-			IRQF_DISABLED, h->devname, h))
+			IRQF_SHARED, h->devname, h))
 		return 0;
 	dev_err(&h->pdev->dev, "Unable to get irq %d for %s\n",
 		h->intr[h->intr_mode], h->devname);

drivers/block/loop.c

@@ -422,7 +422,7 @@ static int do_bio_filebacked(struct loop_device *lo, struct bio *bio)
 
 		/*
 		 * We use punch hole to reclaim the free space used by the
-		 * image a.k.a. discard. However we do support discard if
+		 * image a.k.a. discard. However we do not support discard if
 		 * encryption is enabled, because it may give an attacker
 		 * useful information.
 		 */
@@ -797,7 +797,7 @@ static void loop_config_discard(struct loop_device *lo)
 	}
 
 	q->limits.discard_granularity = inode->i_sb->s_blocksize;
-	q->limits.discard_alignment = inode->i_sb->s_blocksize;
+	q->limits.discard_alignment = 0;
 	q->limits.max_discard_sectors = UINT_MAX >> 9;
 	q->limits.discard_zeroes_data = 1;
 	queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, q);

drivers/block/rbd.c

@@ -183,10 +183,6 @@ static LIST_HEAD(rbd_client_list);      /* clients */
 
 static int __rbd_init_snaps_header(struct rbd_device *rbd_dev);
 static void rbd_dev_release(struct device *dev);
-static ssize_t rbd_snap_rollback(struct device *dev,
-				 struct device_attribute *attr,
-				 const char *buf,
-				 size_t size);
 static ssize_t rbd_snap_add(struct device *dev,
 			    struct device_attribute *attr,
 			    const char *buf,
@@ -461,6 +457,10 @@ static int rbd_header_from_disk(struct rbd_image_header *header,
 	u32 snap_count = le32_to_cpu(ondisk->snap_count);
 	int ret = -ENOMEM;
 
+	if (memcmp(ondisk, RBD_HEADER_TEXT, sizeof(RBD_HEADER_TEXT))) {
+		return -ENXIO;
+	}
+
 	init_rwsem(&header->snap_rwsem);
 	header->snap_names_len = le64_to_cpu(ondisk->snap_names_len);
 	header->snapc = kmalloc(sizeof(struct ceph_snap_context) +
@@ -1355,32 +1355,6 @@ fail:
 	return ret;
 }
 
-/*
- * Request sync osd rollback
- */
-static int rbd_req_sync_rollback_obj(struct rbd_device *dev,
-				     u64 snapid,
-				     const char *obj)
-{
-	struct ceph_osd_req_op *ops;
-	int ret = rbd_create_rw_ops(&ops, 1, CEPH_OSD_OP_ROLLBACK, 0);
-	if (ret < 0)
-		return ret;
-
-	ops[0].snap.snapid = snapid;
-
-	ret = rbd_req_sync_op(dev, NULL,
-			       CEPH_NOSNAP,
-			       0,
-			       CEPH_OSD_FLAG_WRITE | CEPH_OSD_FLAG_ONDISK,
-			       ops,
-			       1, obj, 0, 0, NULL, NULL, NULL);
-
-	rbd_destroy_ops(ops);
-
-	return ret;
-}
-
 /*
  * Request sync osd read
  */
@@ -1610,8 +1584,13 @@ static int rbd_read_header(struct rbd_device *rbd_dev,
 			goto out_dh;
 
 		rc = rbd_header_from_disk(header, dh, snap_count, GFP_KERNEL);
-		if (rc < 0)
+		if (rc < 0) {
+			if (rc == -ENXIO) {
+				pr_warning("unrecognized header format"
+					   " for image %s", rbd_dev->obj);
+			}
 			goto out_dh;
+		}
 
 		if (snap_count != header->total_snaps) {
 			snap_count = header->total_snaps;
@@ -1882,7 +1861,6 @@ static DEVICE_ATTR(name, S_IRUGO, rbd_name_show, NULL);
 static DEVICE_ATTR(refresh, S_IWUSR, NULL, rbd_image_refresh);
 static DEVICE_ATTR(current_snap, S_IRUGO, rbd_snap_show, NULL);
 static DEVICE_ATTR(create_snap, S_IWUSR, NULL, rbd_snap_add);
-static DEVICE_ATTR(rollback_snap, S_IWUSR, NULL, rbd_snap_rollback);
 
 static struct attribute *rbd_attrs[] = {
 	&dev_attr_size.attr,
@@ -1893,7 +1871,6 @@ static struct attribute *rbd_attrs[] = {
 	&dev_attr_current_snap.attr,
 	&dev_attr_refresh.attr,
 	&dev_attr_create_snap.attr,
-	&dev_attr_rollback_snap.attr,
 	NULL
 };
 
@@ -2424,64 +2401,6 @@ err_unlock:
 	return ret;
 }
 
-static ssize_t rbd_snap_rollback(struct device *dev,
-				 struct device_attribute *attr,
-				 const char *buf,
-				 size_t count)
-{
-	struct rbd_device *rbd_dev = dev_to_rbd(dev);
-	int ret;
-	u64 snapid;
-	u64 cur_ofs;
-	char *seg_name = NULL;
-	char *snap_name = kmalloc(count + 1, GFP_KERNEL);
-	ret = -ENOMEM;
-	if (!snap_name)
-		return ret;
-
-	/* parse snaps add command */
-	snprintf(snap_name, count, "%s", buf);
-	seg_name = kmalloc(RBD_MAX_SEG_NAME_LEN + 1, GFP_NOIO);
-	if (!seg_name)
-		goto done;
-
-	mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
-
-	ret = snap_by_name(&rbd_dev->header, snap_name, &snapid, NULL);
-	if (ret < 0)
-		goto done_unlock;
-
-	dout("snapid=%lld\n", snapid);
-
-	cur_ofs = 0;
-	while (cur_ofs < rbd_dev->header.image_size) {
-		cur_ofs += rbd_get_segment(&rbd_dev->header,
-					   rbd_dev->obj,
-					   cur_ofs, (u64)-1,
-					   seg_name, NULL);
-		dout("seg_name=%s\n", seg_name);
-
-		ret = rbd_req_sync_rollback_obj(rbd_dev, snapid, seg_name);
-		if (ret < 0)
-			pr_warning("could not roll back obj %s err=%d\n",
-				   seg_name, ret);
-	}
-
-	ret = __rbd_update_snaps(rbd_dev);
-	if (ret < 0)
-		goto done_unlock;
-
-	ret = count;
-
-done_unlock:
-	mutex_unlock(&ctl_mutex);
-done:
-	kfree(seg_name);
-	kfree(snap_name);
-
-	return ret;
-}
-
 static struct bus_attribute rbd_bus_attrs[] = {
 	__ATTR(add, S_IWUSR, NULL, rbd_add),
 	__ATTR(remove, S_IWUSR, NULL, rbd_remove),

drivers/block/swim3.c

@@ -16,6 +16,8 @@
  * handle GCR disks
  */
 
+#undef DEBUG
+
 #include <linux/stddef.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
@@ -36,13 +38,11 @@
 #include <asm/machdep.h>
 #include <asm/pmac_feature.h>
 
-static DEFINE_MUTEX(swim3_mutex);
-static struct request_queue *swim3_queue;
-static struct gendisk *disks[2];
-static struct request *fd_req;
-
 #define MAX_FLOPPIES	2
 
+static DEFINE_MUTEX(swim3_mutex);
+static struct gendisk *disks[MAX_FLOPPIES];
+
 enum swim_state {
 	idle,
 	locating,
@@ -177,7 +177,6 @@ struct swim3 {
 
 struct floppy_state {
 	enum swim_state	state;
-	spinlock_t lock;
 	struct swim3 __iomem *swim3;	/* hardware registers */
 	struct dbdma_regs __iomem *dma;	/* DMA controller registers */
 	int	swim3_intr;	/* interrupt number for SWIM3 */
@@ -204,8 +203,20 @@ struct floppy_state {
 	int	wanted;
 	struct macio_dev *mdev;
 	char	dbdma_cmd_space[5 * sizeof(struct dbdma_cmd)];
+	int	index;
+	struct request *cur_req;
 };
 
+#define swim3_err(fmt, arg...)	dev_err(&fs->mdev->ofdev.dev, "[fd%d] " fmt, fs->index, arg)
+#define swim3_warn(fmt, arg...)	dev_warn(&fs->mdev->ofdev.dev, "[fd%d] " fmt, fs->index, arg)
+#define swim3_info(fmt, arg...)	dev_info(&fs->mdev->ofdev.dev, "[fd%d] " fmt, fs->index, arg)
+
+#ifdef DEBUG
+#define swim3_dbg(fmt, arg...)	dev_dbg(&fs->mdev->ofdev.dev, "[fd%d] " fmt, fs->index, arg)
+#else
+#define swim3_dbg(fmt, arg...)	do { } while(0)
+#endif
+
 static struct floppy_state floppy_states[MAX_FLOPPIES];
 static int floppy_count = 0;
 static DEFINE_SPINLOCK(swim3_lock);
@@ -224,17 +235,8 @@ static unsigned short write_postamble[] = {
 	0, 0, 0, 0, 0, 0
 };
 
-static void swim3_select(struct floppy_state *fs, int sel);
-static void swim3_action(struct floppy_state *fs, int action);
-static int swim3_readbit(struct floppy_state *fs, int bit);
-static void do_fd_request(struct request_queue * q);
-static void start_request(struct floppy_state *fs);
-static void set_timeout(struct floppy_state *fs, int nticks,
-			void (*proc)(unsigned long));
-static void scan_track(struct floppy_state *fs);
 static void seek_track(struct floppy_state *fs, int n);
 static void init_dma(struct dbdma_cmd *cp, int cmd, void *buf, int count);
-static void setup_transfer(struct floppy_state *fs);
 static void act(struct floppy_state *fs);
 static void scan_timeout(unsigned long data);
 static void seek_timeout(unsigned long data);
@@ -254,20 +256,23 @@ static unsigned int floppy_check_events(struct gendisk *disk,
 					unsigned int clearing);
 static int floppy_revalidate(struct gendisk *disk);
 
-static bool swim3_end_request(int err, unsigned int nr_bytes)
+static bool swim3_end_request(struct floppy_state *fs, int err, unsigned int nr_bytes)
 {
-	if (__blk_end_request(fd_req, err, nr_bytes))
+	struct request *req = fs->cur_req;
+	int rc;
+
+	swim3_dbg("  end request, err=%d nr_bytes=%d, cur_req=%p\n",
+		  err, nr_bytes, req);
+
+	if (err)
+		nr_bytes = blk_rq_cur_bytes(req);
+	rc = __blk_end_request(req, err, nr_bytes);
+	if (rc)
 		return true;
-
-	fd_req = NULL;
+	fs->cur_req = NULL;
 	return false;
 }
 
-static bool swim3_end_request_cur(int err)
-{
-	return swim3_end_request(err, blk_rq_cur_bytes(fd_req));
-}
-
 static void swim3_select(struct floppy_state *fs, int sel)
 {
 	struct swim3 __iomem *sw = fs->swim3;
@@ -303,50 +308,53 @@ static int swim3_readbit(struct floppy_state *fs, int bit)
 	return (stat & DATA) == 0;
 }
 
-static void do_fd_request(struct request_queue * q)
-{
-	int i;
-
-	for(i=0; i<floppy_count; i++) {
-		struct floppy_state *fs = &floppy_states[i];
-		if (fs->mdev->media_bay &&
-		    check_media_bay(fs->mdev->media_bay) != MB_FD)
-			continue;
-		start_request(fs);
-	}
-}
-
 static void start_request(struct floppy_state *fs)
 {
 	struct request *req;
 	unsigned long x;
 
+	swim3_dbg("start request, initial state=%d\n", fs->state);
+
 	if (fs->state == idle && fs->wanted) {
 		fs->state = available;
 		wake_up(&fs->wait);
 		return;
 	}
 	while (fs->state == idle) {
-		if (!fd_req) {
-			fd_req = blk_fetch_request(swim3_queue);
-			if (!fd_req)
+		swim3_dbg("start request, idle loop, cur_req=%p\n", fs->cur_req);
+		if (!fs->cur_req) {
+			fs->cur_req = blk_fetch_request(disks[fs->index]->queue);
+			swim3_dbg("  fetched request %p\n", fs->cur_req);
+			if (!fs->cur_req)
 				break;
 		}
-		req = fd_req;
-#if 0
-		printk("do_fd_req: dev=%s cmd=%d sec=%ld nr_sec=%u buf=%p\n",
-		       req->rq_disk->disk_name, req->cmd,
-		       (long)blk_rq_pos(req), blk_rq_sectors(req), req->buffer);
-		printk("           errors=%d current_nr_sectors=%u\n",
-		       req->errors, blk_rq_cur_sectors(req));
+		req = fs->cur_req;
+
+		if (fs->mdev->media_bay &&
+		    check_media_bay(fs->mdev->media_bay) != MB_FD) {
+			swim3_dbg("%s", "  media bay absent, dropping req\n");
+			swim3_end_request(fs, -ENODEV, 0);
+			continue;
+		}
+
+#if 0 /* This is really too verbose */
+		swim3_dbg("do_fd_req: dev=%s cmd=%d sec=%ld nr_sec=%u buf=%p\n",
+			  req->rq_disk->disk_name, req->cmd,
+			  (long)blk_rq_pos(req), blk_rq_sectors(req),
+			  req->buffer);
+		swim3_dbg("           errors=%d current_nr_sectors=%u\n",
+			  req->errors, blk_rq_cur_sectors(req));
 #endif
 
 		if (blk_rq_pos(req) >= fs->total_secs) {
-			swim3_end_request_cur(-EIO);
+			swim3_dbg("  pos out of bounds (%ld, max is %ld)\n",
+				  (long)blk_rq_pos(req), (long)fs->total_secs);
+			swim3_end_request(fs, -EIO, 0);
 			continue;
 		}
 		if (fs->ejected) {
-			swim3_end_request_cur(-EIO);
+			swim3_dbg("%s", "  disk ejected\n");
+			swim3_end_request(fs, -EIO, 0);
 			continue;
 		}
 
@@ -354,7 +362,8 @@ static void start_request(struct floppy_state *fs)
 			if (fs->write_prot < 0)
 				fs->write_prot = swim3_readbit(fs, WRITE_PROT);
 			if (fs->write_prot) {
-				swim3_end_request_cur(-EIO);
+				swim3_dbg("%s", "  try to write, disk write protected\n");
+				swim3_end_request(fs, -EIO, 0);
 				continue;
 			}
 		}
@@ -369,7 +378,6 @@ static void start_request(struct floppy_state *fs)
 		x = ((long)blk_rq_pos(req)) % fs->secpercyl;
 		fs->head = x / fs->secpertrack;
 		fs->req_sector = x % fs->secpertrack + 1;
-		fd_req = req;
 		fs->state = do_transfer;
 		fs->retries = 0;
 
@@ -377,12 +385,14 @@ static void start_request(struct floppy_state *fs)
 	}
 }
 
+static void do_fd_request(struct request_queue * q)
+{
+	start_request(q->queuedata);
+}
+
 static void set_timeout(struct floppy_state *fs, int nticks,
 			void (*proc)(unsigned long))
 {
-	unsigned long flags;
-
-	spin_lock_irqsave(&fs->lock, flags);
 	if (fs->timeout_pending)
 		del_timer(&fs->timeout);
 	fs->timeout.expires = jiffies + nticks;
@@ -390,7 +400,6 @@ static void set_timeout(struct floppy_state *fs, int nticks,
 	fs->timeout.data = (unsigned long) fs;
 	add_timer(&fs->timeout);
 	fs->timeout_pending = 1;
-	spin_unlock_irqrestore(&fs->lock, flags);
 }
 
 static inline void scan_track(struct floppy_state *fs)
@@ -442,40 +451,45 @@ static inline void setup_transfer(struct floppy_state *fs)
 	struct swim3 __iomem *sw = fs->swim3;
 	struct dbdma_cmd *cp = fs->dma_cmd;
 	struct dbdma_regs __iomem *dr = fs->dma;
+	struct request *req = fs->cur_req;
 
-	if (blk_rq_cur_sectors(fd_req) <= 0) {
-		printk(KERN_ERR "swim3: transfer 0 sectors?\n");
+	if (blk_rq_cur_sectors(req) <= 0) {
+		swim3_warn("%s", "Transfer 0 sectors ?\n");
 		return;
 	}
-	if (rq_data_dir(fd_req) == WRITE)
+	if (rq_data_dir(req) == WRITE)
 		n = 1;
 	else {
 		n = fs->secpertrack - fs->req_sector + 1;
-		if (n > blk_rq_cur_sectors(fd_req))
-			n = blk_rq_cur_sectors(fd_req);
+		if (n > blk_rq_cur_sectors(req))
+			n = blk_rq_cur_sectors(req);
 	}
+
+	swim3_dbg("  setup xfer at sect %d (of %d) head %d for %d\n",
+		  fs->req_sector, fs->secpertrack, fs->head, n);
+
 	fs->scount = n;
 	swim3_select(fs, fs->head? READ_DATA_1: READ_DATA_0);
 	out_8(&sw->sector, fs->req_sector);
 	out_8(&sw->nsect, n);
 	out_8(&sw->gap3, 0);
 	out_le32(&dr->cmdptr, virt_to_bus(cp));
-	if (rq_data_dir(fd_req) == WRITE) {
+	if (rq_data_dir(req) == WRITE) {
 		/* Set up 3 dma commands: write preamble, data, postamble */
 		init_dma(cp, OUTPUT_MORE, write_preamble, sizeof(write_preamble));
 		++cp;
-		init_dma(cp, OUTPUT_MORE, fd_req->buffer, 512);
+		init_dma(cp, OUTPUT_MORE, req->buffer, 512);
 		++cp;
 		init_dma(cp, OUTPUT_LAST, write_postamble, sizeof(write_postamble));
 	} else {
-		init_dma(cp, INPUT_LAST, fd_req->buffer, n * 512);
+		init_dma(cp, INPUT_LAST, req->buffer, n * 512);
 	}
 	++cp;
 	out_le16(&cp->command, DBDMA_STOP);
 	out_8(&sw->control_bic, DO_ACTION | WRITE_SECTORS);
 	in_8(&sw->error);
 	out_8(&sw->control_bic, DO_ACTION | WRITE_SECTORS);
-	if (rq_data_dir(fd_req) == WRITE)
+	if (rq_data_dir(req) == WRITE)
 		out_8(&sw->control_bis, WRITE_SECTORS);
 	in_8(&sw->intr);
 	out_le32(&dr->control, (RUN << 16) | RUN);
@@ -488,12 +502,16 @@ static inline void setup_transfer(struct floppy_state *fs)
 static void act(struct floppy_state *fs)
 {
 	for (;;) {
+		swim3_dbg("  act loop, state=%d, req_cyl=%d, cur_cyl=%d\n",
+			  fs->state, fs->req_cyl, fs->cur_cyl);
+
 		switch (fs->state) {
 		case idle:
 			return;		/* XXX shouldn't get here */
 
 		case locating:
 			if (swim3_readbit(fs, TRACK_ZERO)) {
+				swim3_dbg("%s", "    locate track 0\n");
 				fs->cur_cyl = 0;
 				if (fs->req_cyl == 0)
 					fs->state = do_transfer;
@@ -511,7 +529,7 @@ static void act(struct floppy_state *fs)
 				break;
 			}
 			if (fs->req_cyl == fs->cur_cyl) {
-				printk("whoops, seeking 0\n");
+				swim3_warn("%s", "Whoops, seeking 0\n");
 				fs->state = do_transfer;
 				break;
 			}
@@ -527,7 +545,9 @@ static void act(struct floppy_state *fs)
 		case do_transfer:
 			if (fs->cur_cyl != fs->req_cyl) {
 				if (fs->retries > 5) {
-					swim3_end_request_cur(-EIO);
+					swim3_err("Wrong cylinder in transfer, want: %d got %d\n",
+						  fs->req_cyl, fs->cur_cyl);
+					swim3_end_request(fs, -EIO, 0);
 					fs->state = idle;
 					return;
 				}
@@ -542,7 +562,7 @@ static void act(struct floppy_state *fs)
 			return;
 
 		default:
-			printk(KERN_ERR"swim3: unknown state %d\n", fs->state);
+			swim3_err("Unknown state %d\n", fs->state);
 			return;
 		}
 	}
@@ -552,59 +572,75 @@ static void scan_timeout(unsigned long data)
 {
 	struct floppy_state *fs = (struct floppy_state *) data;
 	struct swim3 __iomem *sw = fs->swim3;
+	unsigned long flags;
 
+	swim3_dbg("* scan timeout, state=%d\n", fs->state);
+
+	spin_lock_irqsave(&swim3_lock, flags);
 	fs->timeout_pending = 0;
 	out_8(&sw->control_bic, DO_ACTION | WRITE_SECTORS);
 	out_8(&sw->select, RELAX);
 	out_8(&sw->intr_enable, 0);
 	fs->cur_cyl = -1;
 	if (fs->retries > 5) {
-		swim3_end_request_cur(-EIO);
+		swim3_end_request(fs, -EIO, 0);
 		fs->state = idle;
 		start_request(fs);
 	} else {
 		fs->state = jogging;
 		act(fs);
 	}
+	spin_unlock_irqrestore(&swim3_lock, flags);
 }
 
 static void seek_timeout(unsigned long data)
 {
 	struct floppy_state *fs = (struct floppy_state *) data;
 	struct swim3 __iomem *sw = fs->swim3;
+	unsigned long flags;
 
+	swim3_dbg("* seek timeout, state=%d\n", fs->state);
+
+	spin_lock_irqsave(&swim3_lock, flags);
 	fs->timeout_pending = 0;
 	out_8(&sw->control_bic, DO_SEEK);
 	out_8(&sw->select, RELAX);
 	out_8(&sw->intr_enable, 0);
-	printk(KERN_ERR "swim3: seek timeout\n");
-	swim3_end_request_cur(-EIO);
+	swim3_err("%s", "Seek timeout\n");
+	swim3_end_request(fs, -EIO, 0);
 	fs->state = idle;
 	start_request(fs);
+	spin_unlock_irqrestore(&swim3_lock, flags);
 }
 
 static void settle_timeout(unsigned long data)
 {
 	struct floppy_state *fs = (struct floppy_state *) data;
 	struct swim3 __iomem *sw = fs->swim3;
+	unsigned long flags;
 
+	swim3_dbg("* settle timeout, state=%d\n", fs->state);
+
+	spin_lock_irqsave(&swim3_lock, flags);
 	fs->timeout_pending = 0;
 	if (swim3_readbit(fs, SEEK_COMPLETE)) {
 		out_8(&sw->select, RELAX);
 		fs->state = locating;
 		act(fs);
-		return;
+		goto unlock;
 	}
 	out_8(&sw->select, RELAX);
 	if (fs->settle_time < 2*HZ) {
 		++fs->settle_time;
 		set_timeout(fs, 1, settle_timeout);
-		return;
+		goto unlock;
 	}
-	printk(KERN_ERR "swim3: seek settle timeout\n");
-	swim3_end_request_cur(-EIO);
+	swim3_err("%s", "Seek settle timeout\n");
+	swim3_end_request(fs, -EIO, 0);
 	fs->state = idle;
 	start_request(fs);
+ unlock:
+	spin_unlock_irqrestore(&swim3_lock, flags);
 }
 
 static void xfer_timeout(unsigned long data)
@@ -612,8 +648,12 @@ static void xfer_timeout(unsigned long data)
 	struct floppy_state *fs = (struct floppy_state *) data;
 	struct swim3 __iomem *sw = fs->swim3;
 	struct dbdma_regs __iomem *dr = fs->dma;
+	unsigned long flags;
 	int n;
 
+	swim3_dbg("* xfer timeout, state=%d\n", fs->state);
+
+	spin_lock_irqsave(&swim3_lock, flags);
 	fs->timeout_pending = 0;
 	out_le32(&dr->control, RUN << 16);
 	/* We must wait a bit for dbdma to stop */
@@ -622,12 +662,13 @@ static void xfer_timeout(unsigned long data)
 	out_8(&sw->intr_enable, 0);
 	out_8(&sw->control_bic, WRITE_SECTORS | DO_ACTION);
 	out_8(&sw->select, RELAX);
-	printk(KERN_ERR "swim3: timeout %sing sector %ld\n",
-	       (rq_data_dir(fd_req)==WRITE? "writ": "read"),
-	       (long)blk_rq_pos(fd_req));
-	swim3_end_request_cur(-EIO);
+	swim3_err("Timeout %sing sector %ld\n",
+	       (rq_data_dir(fs->cur_req)==WRITE? "writ": "read"),
+	       (long)blk_rq_pos(fs->cur_req));
+	swim3_end_request(fs, -EIO, 0);
 	fs->state = idle;
 	start_request(fs);
+	spin_unlock_irqrestore(&swim3_lock, flags);
 }
 
 static irqreturn_t swim3_interrupt(int irq, void *dev_id)
@@ -638,12 +679,17 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id)
 	int stat, resid;
 	struct dbdma_regs __iomem *dr;
 	struct dbdma_cmd *cp;
+	unsigned long flags;
+	struct request *req = fs->cur_req;
 
+	swim3_dbg("* interrupt, state=%d\n", fs->state);
+
+	spin_lock_irqsave(&swim3_lock, flags);
 	intr = in_8(&sw->intr);
 	err = (intr & ERROR_INTR)? in_8(&sw->error): 0;
 	if ((intr & ERROR_INTR) && fs->state != do_transfer)
-		printk(KERN_ERR "swim3_interrupt, state=%d, dir=%x, intr=%x, err=%x\n",
-		       fs->state, rq_data_dir(fd_req), intr, err);
+		swim3_err("Non-transfer error interrupt: state=%d, dir=%x, intr=%x, err=%x\n",
+			  fs->state, rq_data_dir(req), intr, err);
 	switch (fs->state) {
 	case locating:
 		if (intr & SEEN_SECTOR) {
@@ -653,10 +699,10 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id)
 			del_timer(&fs->timeout);
 			fs->timeout_pending = 0;
 			if (sw->ctrack == 0xff) {
-				printk(KERN_ERR "swim3: seen sector but cyl=ff?\n");
+				swim3_err("%s", "Seen sector but cyl=ff?\n");
 				fs->cur_cyl = -1;
 				if (fs->retries > 5) {
-					swim3_end_request_cur(-EIO);
+					swim3_end_request(fs, -EIO, 0);
 					fs->state = idle;
 					start_request(fs);
 				} else {
@@ -668,8 +714,8 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id)
 			fs->cur_cyl = sw->ctrack;
 			fs->cur_sector = sw->csect;
 			if (fs->expect_cyl != -1 && fs->expect_cyl != fs->cur_cyl)
-				printk(KERN_ERR "swim3: expected cyl %d, got %d\n",
-				       fs->expect_cyl, fs->cur_cyl);
+				swim3_err("Expected cyl %d, got %d\n",
+					  fs->expect_cyl, fs->cur_cyl);
 			fs->state = do_transfer;
 			act(fs);
 		}
@@ -704,7 +750,7 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id)
 		fs->timeout_pending = 0;
 		dr = fs->dma;
 		cp = fs->dma_cmd;
-		if (rq_data_dir(fd_req) == WRITE)
+		if (rq_data_dir(req) == WRITE)
 			++cp;
 		/*
 		 * Check that the main data transfer has finished.
@@ -729,31 +775,32 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id)
 		if (intr & ERROR_INTR) {
 			n = fs->scount - 1 - resid / 512;
 			if (n > 0) {
-				blk_update_request(fd_req, 0, n << 9);
+				blk_update_request(req, 0, n << 9);
 				fs->req_sector += n;
 			}
 			if (fs->retries < 5) {
 				++fs->retries;
 				act(fs);
 			} else {
-				printk("swim3: error %sing block %ld (err=%x)\n",
-				       rq_data_dir(fd_req) == WRITE? "writ": "read",
-				       (long)blk_rq_pos(fd_req), err);
-				swim3_end_request_cur(-EIO);
+				swim3_err("Error %sing block %ld (err=%x)\n",
+				       rq_data_dir(req) == WRITE? "writ": "read",
+				       (long)blk_rq_pos(req), err);
+				swim3_end_request(fs, -EIO, 0);
 				fs->state = idle;
 			}
 		} else {
 			if ((stat & ACTIVE) == 0 || resid != 0) {
 				/* musta been an error */
-				printk(KERN_ERR "swim3: fd dma: stat=%x resid=%d\n", stat, resid);
-				printk(KERN_ERR "  state=%d, dir=%x, intr=%x, err=%x\n",
-				       fs->state, rq_data_dir(fd_req), intr, err);
-				swim3_end_request_cur(-EIO);
+				swim3_err("fd dma error: stat=%x resid=%d\n", stat, resid);
+				swim3_err("  state=%d, dir=%x, intr=%x, err=%x\n",
+					  fs->state, rq_data_dir(req), intr, err);
+				swim3_end_request(fs, -EIO, 0);
 				fs->state = idle;
 				start_request(fs);
 				break;
 			}
-			if (swim3_end_request(0, fs->scount << 9)) {
+			fs->retries = 0;
+			if (swim3_end_request(fs, 0, fs->scount << 9)) {
 				fs->req_sector += fs->scount;
 				if (fs->req_sector > fs->secpertrack) {
 					fs->req_sector -= fs->secpertrack;
@@ -770,8 +817,9 @@ static irqreturn_t swim3_interrupt(int irq, void *dev_id)
 			start_request(fs);
 		break;
 	default:
-		printk(KERN_ERR "swim3: don't know what to do in state %d\n", fs->state);
+		swim3_err("Don't know what to do in state %d\n", fs->state);
 	}
+	spin_unlock_irqrestore(&swim3_lock, flags);
 	return IRQ_HANDLED;
 }
 
@@ -781,26 +829,31 @@ static void fd_dma_interrupt(int irq, void *dev_id)
 }
 */
 
+/* Called under the mutex to grab exclusive access to a drive */
 static int grab_drive(struct floppy_state *fs, enum swim_state state,
 		      int interruptible)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&fs->lock, flags);
-	if (fs->state != idle) {
+	swim3_dbg("%s", "-> grab drive\n");
+
+	spin_lock_irqsave(&swim3_lock, flags);
+	if (fs->state != idle && fs->state != available) {
 		++fs->wanted;
 		while (fs->state != available) {
+			spin_unlock_irqrestore(&swim3_lock, flags);
 			if (interruptible && signal_pending(current)) {
 				--fs->wanted;
-				spin_unlock_irqrestore(&fs->lock, flags);
 				return -EINTR;
 			}
 			interruptible_sleep_on(&fs->wait);
+			spin_lock_irqsave(&swim3_lock, flags);
 		}
 		--fs->wanted;
 	}
 	fs->state = state;
-	spin_unlock_irqrestore(&fs->lock, flags);
+	spin_unlock_irqrestore(&swim3_lock, flags);
+
 	return 0;
 }
 
@@ -808,10 +861,12 @@ static void release_drive(struct floppy_state *fs)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&fs->lock, flags);
+	swim3_dbg("%s", "-> release drive\n");
+
+	spin_lock_irqsave(&swim3_lock, flags);
 	fs->state = idle;
 	start_request(fs);
-	spin_unlock_irqrestore(&fs->lock, flags);
+	spin_unlock_irqrestore(&swim3_lock, flags);
 }
 
 static int fd_eject(struct floppy_state *fs)
@@ -966,6 +1021,7 @@ static int floppy_release(struct gendisk *disk, fmode_t mode)
 {
 	struct floppy_state *fs = disk->private_data;
 	struct swim3 __iomem *sw = fs->swim3;
+
 	mutex_lock(&swim3_mutex);
 	if (fs->ref_count > 0 && --fs->ref_count == 0) {
 		swim3_action(fs, MOTOR_OFF);
@@ -1031,30 +1087,48 @@ static const struct block_device_operations floppy_fops = {
 	.revalidate_disk= floppy_revalidate,
 };
 
+static void swim3_mb_event(struct macio_dev* mdev, int mb_state)
+{
+	struct floppy_state *fs = macio_get_drvdata(mdev);
+	struct swim3 __iomem *sw = fs->swim3;
+
+	if (!fs)
+		return;
+	if (mb_state != MB_FD)
+		return;
+
+	/* Clear state */
+	out_8(&sw->intr_enable, 0);
+	in_8(&sw->intr);
+	in_8(&sw->error);
+}
+
 static int swim3_add_device(struct macio_dev *mdev, int index)
 {
 	struct device_node *swim = mdev->ofdev.dev.of_node;
 	struct floppy_state *fs = &floppy_states[index];
 	int rc = -EBUSY;
 
+	/* Do this first for message macros */
+	memset(fs, 0, sizeof(*fs));
+	fs->mdev = mdev;
+	fs->index = index;
+
 	/* Check & Request resources */
 	if (macio_resource_count(mdev) < 2) {
-		printk(KERN_WARNING "ifd%d: no address for %s\n",
-		       index, swim->full_name);
+		swim3_err("%s", "No address in device-tree\n");
 		return -ENXIO;
 	}
-	if (macio_irq_count(mdev) < 2) {
-		printk(KERN_WARNING "fd%d: no intrs for device %s\n",
-			index, swim->full_name);
+	if (macio_irq_count(mdev) < 1) {
+		swim3_err("%s", "No interrupt in device-tree\n");
+		return -ENXIO;
 	}
 	if (macio_request_resource(mdev, 0, "swim3 (mmio)")) {
-		printk(KERN_ERR "fd%d: can't request mmio resource for %s\n",
-		       index, swim->full_name);
+		swim3_err("%s", "Can't request mmio resource\n");
 		return -EBUSY;
 	}
 	if (macio_request_resource(mdev, 1, "swim3 (dma)")) {
-		printk(KERN_ERR "fd%d: can't request dma resource for %s\n",
-		       index, swim->full_name);
+		swim3_err("%s", "Can't request dma resource\n");
 		macio_release_resource(mdev, 0);
 		return -EBUSY;
 	}
@@ -1063,22 +1137,18 @@ static int swim3_add_device(struct macio_dev *mdev, int index)
 	if (mdev->media_bay == NULL)
 		pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 1);
 	
-	memset(fs, 0, sizeof(*fs));
-	spin_lock_init(&fs->lock);
 	fs->state = idle;
 	fs->swim3 = (struct swim3 __iomem *)
 		ioremap(macio_resource_start(mdev, 0), 0x200);
 	if (fs->swim3 == NULL) {
-		printk("fd%d: couldn't map registers for %s\n",
-		       index, swim->full_name);
+		swim3_err("%s", "Couldn't map mmio registers\n");
 		rc = -ENOMEM;
 		goto out_release;
 	}
 	fs->dma = (struct dbdma_regs __iomem *)
 		ioremap(macio_resource_start(mdev, 1), 0x200);
 	if (fs->dma == NULL) {
-		printk("fd%d: couldn't map DMA for %s\n",
-		       index, swim->full_name);
+		swim3_err("%s", "Couldn't map dma registers\n");
 		iounmap(fs->swim3);
 		rc = -ENOMEM;
 		goto out_release;
@@ -1090,31 +1160,25 @@ static int swim3_add_device(struct macio_dev *mdev, int index)
 	fs->secpercyl = 36;
 	fs->secpertrack = 18;
 	fs->total_secs = 2880;
-	fs->mdev = mdev;
 	init_waitqueue_head(&fs->wait);
 
 	fs->dma_cmd = (struct dbdma_cmd *) DBDMA_ALIGN(fs->dbdma_cmd_space);
 	memset(fs->dma_cmd, 0, 2 * sizeof(struct dbdma_cmd));
 	st_le16(&fs->dma_cmd[1].command, DBDMA_STOP);
 
+	if (mdev->media_bay == NULL || check_media_bay(mdev->media_bay) == MB_FD)
+		swim3_mb_event(mdev, MB_FD);
+
 	if (request_irq(fs->swim3_intr, swim3_interrupt, 0, "SWIM3", fs)) {
-		printk(KERN_ERR "fd%d: couldn't request irq %d for %s\n",
-		       index, fs->swim3_intr, swim->full_name);
+		swim3_err("%s", "Couldn't request interrupt\n");
 		pmac_call_feature(PMAC_FTR_SWIM3_ENABLE, swim, 0, 0);
 		goto out_unmap;
 		return -EBUSY;
 	}
-/*
-	if (request_irq(fs->dma_intr, fd_dma_interrupt, 0, "SWIM3-dma", fs)) {
-		printk(KERN_ERR "Couldn't get irq %d for SWIM3 DMA",
-		       fs->dma_intr);
-		return -EBUSY;
-	}
-*/
 
 	init_timer(&fs->timeout);
 
-	printk(KERN_INFO "fd%d: SWIM3 floppy controller %s\n", floppy_count,
+	swim3_info("SWIM3 floppy controller %s\n",
 		mdev->media_bay ? "in media bay" : "");
 
 	return 0;
@@ -1132,41 +1196,42 @@ static int swim3_add_device(struct macio_dev *mdev, int index)
 
 static int __devinit swim3_attach(struct macio_dev *mdev, const struct of_device_id *match)
 {
-	int i, rc;
 	struct gendisk *disk;
+	int index, rc;
+
+	index = floppy_count++;
+	if (index >= MAX_FLOPPIES)
+		return -ENXIO;
 
 	/* Add the drive */
-	rc = swim3_add_device(mdev, floppy_count);
+	rc = swim3_add_device(mdev, index);
 	if (rc)
 		return rc;
+	/* Now register that disk. Same comment about failure handling */
+	disk = disks[index] = alloc_disk(1);
+	if (disk == NULL)
+		return -ENOMEM;
+	disk->queue = blk_init_queue(do_fd_request, &swim3_lock);
+	if (disk->queue == NULL) {
+		put_disk(disk);
+		return -ENOMEM;
+	}
+	disk->queue->queuedata = &floppy_states[index];
 
-	/* Now create the queue if not there yet */
-	if (swim3_queue == NULL) {
+	if (index == 0) {
 		/* If we failed, there isn't much we can do as the driver is still
 		 * too dumb to remove the device, just bail out
 		 */
 		if (register_blkdev(FLOPPY_MAJOR, "fd"))
 			return 0;
-		swim3_queue = blk_init_queue(do_fd_request, &swim3_lock);
-		if (swim3_queue == NULL) {
-			unregister_blkdev(FLOPPY_MAJOR, "fd");
-			return 0;
-		}
 	}
 
-	/* Now register that disk. Same comment about failure handling */
-	i = floppy_count++;
-	disk = disks[i] = alloc_disk(1);
-	if (disk == NULL)
-		return 0;
-
 	disk->major = FLOPPY_MAJOR;
-	disk->first_minor = i;
+	disk->first_minor = index;
 	disk->fops = &floppy_fops;
-	disk->private_data = &floppy_states[i];
-	disk->queue = swim3_queue;
+	disk->private_data = &floppy_states[index];
 	disk->flags |= GENHD_FL_REMOVABLE;
-	sprintf(disk->disk_name, "fd%d", i);
+	sprintf(disk->disk_name, "fd%d", index);
 	set_capacity(disk, 2880);
 	add_disk(disk);
 
@@ -1194,6 +1259,9 @@ static struct macio_driver swim3_driver =
 		.of_match_table	= swim3_match,
 	},
 	.probe		= swim3_attach,
+#ifdef CONFIG_PMAC_MEDIABAY
+	.mediabay_event	= swim3_mb_event,
+#endif
 #if 0
 	.suspend	= swim3_suspend,
 	.resume		= swim3_resume,

drivers/bluetooth/Kconfig

@@ -188,7 +188,7 @@ config BT_MRVL
 	  The core driver to support Marvell Bluetooth devices.
 
 	  This driver is required if you want to support
-	  Marvell Bluetooth devices, such as 8688/8787.
+	  Marvell Bluetooth devices, such as 8688/8787/8797.
 
 	  Say Y here to compile Marvell Bluetooth driver
 	  into the kernel or say M to compile it as module.
@@ -201,8 +201,8 @@ config BT_MRVL_SDIO
 	  The driver for Marvell Bluetooth chipsets with SDIO interface.
 
 	  This driver is required if you want to use Marvell Bluetooth
-	  devices with SDIO interface. Currently SD8688/SD8787 chipsets are
-	  supported.
+	  devices with SDIO interface. Currently SD8688/SD8787/SD8797
+	  chipsets are supported.
 
 	  Say Y here to compile support for Marvell BT-over-SDIO driver
 	  into the kernel or say M to compile it as module.

drivers/bluetooth/btmrvl_sdio.c

@@ -65,7 +65,7 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_8688 = {
 	.io_port_1 = 0x01,
 	.io_port_2 = 0x02,
 };
-static const struct btmrvl_sdio_card_reg btmrvl_reg_8787 = {
+static const struct btmrvl_sdio_card_reg btmrvl_reg_87xx = {
 	.cfg = 0x00,
 	.host_int_mask = 0x02,
 	.host_intstatus = 0x03,
@@ -92,7 +92,14 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = {
 static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
 	.helper		= NULL,
 	.firmware	= "mrvl/sd8787_uapsta.bin",
-	.reg		= &btmrvl_reg_8787,
+	.reg		= &btmrvl_reg_87xx,
+	.sd_blksz_fw_dl	= 256,
+};
+
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = {
+	.helper		= NULL,
+	.firmware	= "mrvl/sd8797_uapsta.bin",
+	.reg		= &btmrvl_reg_87xx,
 	.sd_blksz_fw_dl	= 256,
 };
 
@@ -103,6 +110,9 @@ static const struct sdio_device_id btmrvl_sdio_ids[] = {
 	/* Marvell SD8787 Bluetooth device */
 	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x911A),
 			.driver_data = (unsigned long) &btmrvl_sdio_sd8787 },
+	/* Marvell SD8797 Bluetooth device */
+	{ SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x912A),
+			.driver_data = (unsigned long) &btmrvl_sdio_sd8797 },
 
 	{ }	/* Terminating entry */
 };
@@ -1076,3 +1086,4 @@ MODULE_LICENSE("GPL v2");
 MODULE_FIRMWARE("sd8688_helper.bin");
 MODULE_FIRMWARE("sd8688.bin");
 MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");
+MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin");

drivers/bluetooth/btusb.c

@@ -777,9 +777,8 @@ skip_waking:
 		usb_mark_last_busy(data->udev);
 	}
 
-	usb_free_urb(urb);
-
 done:
+	usb_free_urb(urb);
 	return err;
 }
 

drivers/char/ipmi/ipmi_watchdog.c

@@ -139,6 +139,8 @@
 #define IPMI_WDOG_SET_TIMER		0x24
 #define IPMI_WDOG_GET_TIMER		0x25
 
+#define IPMI_WDOG_TIMER_NOT_INIT_RESP	0x80
+
 /* These are here until the real ones get into the watchdog.h interface. */
 #ifndef WDIOC_GETTIMEOUT
 #define	WDIOC_GETTIMEOUT        _IOW(WATCHDOG_IOCTL_BASE, 20, int)
@@ -596,6 +598,7 @@ static int ipmi_heartbeat(void)
 	struct kernel_ipmi_msg            msg;
 	int                               rv;
 	struct ipmi_system_interface_addr addr;
+	int				  timeout_retries = 0;
 
 	if (ipmi_ignore_heartbeat)
 		return 0;
@@ -616,6 +619,7 @@ static int ipmi_heartbeat(void)
 
 	mutex_lock(&heartbeat_lock);
 
+restart:
 	atomic_set(&heartbeat_tofree, 2);
 
 	/*
@@ -653,7 +657,33 @@ static int ipmi_heartbeat(void)
 	/* Wait for the heartbeat to be sent. */
 	wait_for_completion(&heartbeat_wait);
 
-	if (heartbeat_recv_msg.msg.data[0] != 0) {
+	if (heartbeat_recv_msg.msg.data[0] == IPMI_WDOG_TIMER_NOT_INIT_RESP)  {
+		timeout_retries++;
+		if (timeout_retries > 3) {
+			printk(KERN_ERR PFX ": Unable to restore the IPMI"
+			       " watchdog's settings, giving up.\n");
+			rv = -EIO;
+			goto out_unlock;
+		}
+
+		/*
+		 * The timer was not initialized, that means the BMC was
+		 * probably reset and lost the watchdog information.  Attempt
+		 * to restore the timer's info.  Note that we still hold
+		 * the heartbeat lock, to keep a heartbeat from happening
+		 * in this process, so must say no heartbeat to avoid a
+		 * deadlock on this mutex.
+		 */
+		rv = ipmi_set_timeout(IPMI_SET_TIMEOUT_NO_HB);
+		if (rv) {
+			printk(KERN_ERR PFX ": Unable to send the command to"
+			       " set the watchdog's settings, giving up.\n");
+			goto out_unlock;
+		}
+
+		/* We might need a new heartbeat, so do it now */
+		goto restart;
+	} else if (heartbeat_recv_msg.msg.data[0] != 0) {
 		/*
 		 * Got an error in the heartbeat response.  It was already
 		 * reported in ipmi_wdog_msg_handler, but we should return
@@ -662,6 +692,7 @@ static int ipmi_heartbeat(void)
 		rv = -EINVAL;
 	}
 
+out_unlock:
 	mutex_unlock(&heartbeat_lock);
 
 	return rv;
@@ -922,11 +953,15 @@ static struct miscdevice ipmi_wdog_miscdev = {
 static void ipmi_wdog_msg_handler(struct ipmi_recv_msg *msg,
 				  void                 *handler_data)
 {
-	if (msg->msg.data[0] != 0) {
+	if (msg->msg.cmd == IPMI_WDOG_RESET_TIMER &&
+			msg->msg.data[0] == IPMI_WDOG_TIMER_NOT_INIT_RESP)
+		printk(KERN_INFO PFX "response: The IPMI controller appears"
+		       " to have been reset, will attempt to reinitialize"
+		       " the watchdog timer\n");
+	else if (msg->msg.data[0] != 0)
 		printk(KERN_ERR PFX "response: Error %x on cmd %x\n",
 		       msg->msg.data[0],
 		       msg->msg.cmd);
-	}
 
 	ipmi_free_recv_msg(msg);
 }

drivers/firmware/iscsi_ibft.c

@@ -746,6 +746,37 @@ static void __exit ibft_exit(void)
 	ibft_cleanup();
 }
 
+#ifdef CONFIG_ACPI
+static const struct {
+	char *sign;
+} ibft_signs[] = {
+	/*
+	 * One spec says "IBFT", the other says "iBFT". We have to check
+	 * for both.
+	 */
+	{ ACPI_SIG_IBFT },
+	{ "iBFT" },
+};
+
+static void __init acpi_find_ibft_region(void)
+{
+	int i;
+	struct acpi_table_header *table = NULL;
+
+	if (acpi_disabled)
+		return;
+
+	for (i = 0; i < ARRAY_SIZE(ibft_signs) && !ibft_addr; i++) {
+		acpi_get_table(ibft_signs[i].sign, 0, &table);
+		ibft_addr = (struct acpi_table_ibft *)table;
+	}
+}
+#else
+static void __init acpi_find_ibft_region(void)
+{
+}
+#endif
+
 /*
  * ibft_init() - creates sysfs tree entries for the iBFT data.
  */
@@ -753,9 +784,16 @@ static int __init ibft_init(void)
 {
 	int rc = 0;
 
+	/*
+	   As on UEFI systems the setup_arch()/find_ibft_region()
+	   is called before ACPI tables are parsed and it only does
+	   legacy finding.
+	*/
+	if (!ibft_addr)
+		acpi_find_ibft_region();
+
 	if (ibft_addr) {
-		printk(KERN_INFO "iBFT detected at 0x%llx.\n",
-		       (u64)isa_virt_to_bus(ibft_addr));
+		pr_info("iBFT detected.\n");
 
 		rc = ibft_check_device();
 		if (rc)

drivers/firmware/iscsi_ibft_find.c

@@ -45,13 +45,6 @@ EXPORT_SYMBOL_GPL(ibft_addr);
 static const struct {
 	char *sign;
 } ibft_signs[] = {
-#ifdef CONFIG_ACPI
-	/*
-	 * One spec says "IBFT", the other says "iBFT". We have to check
-	 * for both.
-	 */
-	{ ACPI_SIG_IBFT },
-#endif
 	{ "iBFT" },
 	{ "BIFT" },	/* Broadcom iSCSI Offload */
 };
@@ -62,14 +55,6 @@ static const struct {
 #define VGA_MEM 0xA0000 /* VGA buffer */
 #define VGA_SIZE 0x20000 /* 128kB */
 
-#ifdef CONFIG_ACPI
-static int __init acpi_find_ibft(struct acpi_table_header *header)
-{
-	ibft_addr = (struct acpi_table_ibft *)header;
-	return 0;
-}
-#endif /* CONFIG_ACPI */
-
 static int __init find_ibft_in_mem(void)
 {
 	unsigned long pos;
@@ -94,6 +79,7 @@ static int __init find_ibft_in_mem(void)
 				 * the table cannot be valid. */
 				if (pos + len <= (IBFT_END-1)) {
 					ibft_addr = (struct acpi_table_ibft *)virt;
+					pr_info("iBFT found at 0x%lx.\n", pos);
 					goto done;
 				}
 			}
@@ -108,20 +94,12 @@ done:
  */
 unsigned long __init find_ibft_region(unsigned long *sizep)
 {
-#ifdef CONFIG_ACPI
-	int i;
-#endif
 	ibft_addr = NULL;
 
-#ifdef CONFIG_ACPI
-	for (i = 0; i < ARRAY_SIZE(ibft_signs) && !ibft_addr; i++)
-		acpi_table_parse(ibft_signs[i].sign, acpi_find_ibft);
-#endif /* CONFIG_ACPI */
-
 	/* iBFT 1.03 section 1.4.3.1 mandates that UEFI machines will
 	 * only use ACPI for this */
 
-	if (!ibft_addr && !efi_enabled)
+	if (!efi_enabled)
 		find_ibft_in_mem();
 
 	if (ibft_addr) {

drivers/gpio/gpio-da9052.c

@@ -22,7 +22,6 @@
 #include <linux/mfd/da9052/da9052.h>
 #include <linux/mfd/da9052/reg.h>
 #include <linux/mfd/da9052/pdata.h>
-#include <linux/mfd/da9052/gpio.h>
 
 #define DA9052_INPUT				1
 #define DA9052_OUTPUT_OPENDRAIN		2
@@ -43,6 +42,9 @@
 #define DA9052_GPIO_MASK_UPPER_NIBBLE		0xF0
 #define DA9052_GPIO_MASK_LOWER_NIBBLE		0x0F
 #define DA9052_GPIO_NIBBLE_SHIFT		4
+#define DA9052_IRQ_GPI0			16
+#define DA9052_GPIO_ODD_SHIFT			7
+#define DA9052_GPIO_EVEN_SHIFT			3
 
 struct da9052_gpio {
 	struct da9052 *da9052;
@@ -104,33 +106,26 @@ static int da9052_gpio_get(struct gpio_chip *gc, unsigned offset)
 static void da9052_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
 {
 	struct da9052_gpio *gpio = to_da9052_gpio(gc);
-	unsigned char register_value = 0;
 	int ret;
 
 	if (da9052_gpio_port_odd(offset)) {
-		if (value) {
-			register_value = DA9052_GPIO_ODD_PORT_MODE;
 			ret = da9052_reg_update(gpio->da9052, (offset >> 1) +
 						DA9052_GPIO_0_1_REG,
 						DA9052_GPIO_ODD_PORT_MODE,
-						register_value);
+						value << DA9052_GPIO_ODD_SHIFT);
 			if (ret != 0)
 				dev_err(gpio->da9052->dev,
 					"Failed to updated gpio odd reg,%d",
 					ret);
-		}
 	} else {
-		if (value) {
-			register_value = DA9052_GPIO_EVEN_PORT_MODE;
 			ret = da9052_reg_update(gpio->da9052, (offset >> 1) +
 						DA9052_GPIO_0_1_REG,
 						DA9052_GPIO_EVEN_PORT_MODE,
-						register_value);
+						value << DA9052_GPIO_EVEN_SHIFT);
 			if (ret != 0)
 				dev_err(gpio->da9052->dev,
 					"Failed to updated gpio even reg,%d",
 					ret);
-		}
 	}
 }
 
@@ -201,9 +196,9 @@ static struct gpio_chip reference_gp __devinitdata = {
 	.direction_input = da9052_gpio_direction_input,
 	.direction_output = da9052_gpio_direction_output,
 	.to_irq = da9052_gpio_to_irq,
-	.can_sleep = 1;
-	.ngpio = 16;
-	.base = -1;
+	.can_sleep = 1,
+	.ngpio = 16,
+	.base = -1,
 };
 
 static int __devinit da9052_gpio_probe(struct platform_device *pdev)

drivers/gpio/gpio-ml-ioh.c

@@ -332,6 +332,34 @@ static void ioh_irq_mask(struct irq_data *d)
 		  &chip->reg->regs[chip->ch].imask);
 }
 
+static void ioh_irq_disable(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct ioh_gpio *chip = gc->private;
+	unsigned long flags;
+	u32 ien;
+
+	spin_lock_irqsave(&chip->spinlock, flags);
+	ien = ioread32(&chip->reg->regs[chip->ch].ien);
+	ien &= ~(1 << (d->irq - chip->irq_base));
+	iowrite32(ien, &chip->reg->regs[chip->ch].ien);
+	spin_unlock_irqrestore(&chip->spinlock, flags);
+}
+
+static void ioh_irq_enable(struct irq_data *d)
+{
+	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
+	struct ioh_gpio *chip = gc->private;
+	unsigned long flags;
+	u32 ien;
+
+	spin_lock_irqsave(&chip->spinlock, flags);
+	ien = ioread32(&chip->reg->regs[chip->ch].ien);
+	ien |= 1 << (d->irq - chip->irq_base);
+	iowrite32(ien, &chip->reg->regs[chip->ch].ien);
+	spin_unlock_irqrestore(&chip->spinlock, flags);
+}
+
 static irqreturn_t ioh_gpio_handler(int irq, void *dev_id)
 {
 	struct ioh_gpio *chip = dev_id;
@@ -339,7 +367,7 @@ static irqreturn_t ioh_gpio_handler(int irq, void *dev_id)
 	int i, j;
 	int ret = IRQ_NONE;
 
-	for (i = 0; i < 8; i++) {
+	for (i = 0; i < 8; i++, chip++) {
 		reg_val = ioread32(&chip->reg->regs[i].istatus);
 		for (j = 0; j < num_ports[i]; j++) {
 			if (reg_val & BIT(j)) {
@@ -370,6 +398,8 @@ static __devinit void ioh_gpio_alloc_generic_chip(struct ioh_gpio *chip,
 	ct->chip.irq_mask = ioh_irq_mask;
 	ct->chip.irq_unmask = ioh_irq_unmask;
 	ct->chip.irq_set_type = ioh_irq_type;
+	ct->chip.irq_disable = ioh_irq_disable;
+	ct->chip.irq_enable = ioh_irq_enable;
 
 	irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE,
 			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);

drivers/gpio/gpio-mpc8xxx.c

@@ -132,6 +132,15 @@ static int mpc8xxx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val
 	return 0;
 }
 
+static int mpc5121_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	/* GPIO 28..31 are input only on MPC5121 */
+	if (gpio >= 28)
+		return -EINVAL;
+
+	return mpc8xxx_gpio_dir_out(gc, gpio, val);
+}
+
 static int mpc8xxx_gpio_to_irq(struct gpio_chip *gc, unsigned offset)
 {
 	struct of_mm_gpio_chip *mm = to_of_mm_gpio_chip(gc);
@@ -340,11 +349,10 @@ static void __init mpc8xxx_add_controller(struct device_node *np)
 	mm_gc->save_regs = mpc8xxx_gpio_save_regs;
 	gc->ngpio = MPC8XXX_GPIO_PINS;
 	gc->direction_input = mpc8xxx_gpio_dir_in;
-	gc->direction_output = mpc8xxx_gpio_dir_out;
-	if (of_device_is_compatible(np, "fsl,mpc8572-gpio"))
-		gc->get = mpc8572_gpio_get;
-	else
-		gc->get = mpc8xxx_gpio_get;
+	gc->direction_output = of_device_is_compatible(np, "fsl,mpc5121-gpio") ?
+		mpc5121_gpio_dir_out : mpc8xxx_gpio_dir_out;
+	gc->get = of_device_is_compatible(np, "fsl,mpc8572-gpio") ?
+		mpc8572_gpio_get : mpc8xxx_gpio_get;
 	gc->set = mpc8xxx_gpio_set;
 	gc->to_irq = mpc8xxx_gpio_to_irq;
 

drivers/gpio/gpio-pl061.c

@@ -238,10 +238,6 @@ static int pl061_probe(struct amba_device *dev, const struct amba_id *id)
 	int ret, irq, i;
 	static DECLARE_BITMAP(init_irq, NR_IRQS);
 
-	pdata = dev->dev.platform_data;
-	if (pdata == NULL)
-		return -ENODEV;
-
 	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
 	if (chip == NULL)
 		return -ENOMEM;

drivers/gpu/drm/i915/i915_debugfs.c

@@ -62,6 +62,7 @@ static int i915_capabilities(struct seq_file *m, void *data)
 	const struct intel_device_info *info = INTEL_INFO(dev);
 
 	seq_printf(m, "gen: %d\n", info->gen);
+	seq_printf(m, "pch: %d\n", INTEL_PCH_TYPE(dev));
 #define B(x) seq_printf(m, #x ": %s\n", yesno(info->x))
 	B(is_mobile);
 	B(is_i85x);

drivers/gpu/drm/i915/i915_dma.c

@@ -1454,6 +1454,14 @@ unsigned long i915_chipset_val(struct drm_i915_private *dev_priv)
 
 	diff1 = now - dev_priv->last_time1;
 
+	/* Prevent division-by-zero if we are asking too fast.
+	 * Also, we don't get interesting results if we are polling
+	 * faster than once in 10ms, so just return the saved value
+	 * in such cases.
+	 */
+	if (diff1 <= 10)
+		return dev_priv->chipset_power;
+
 	count1 = I915_READ(DMIEC);
 	count2 = I915_READ(DDREC);
 	count3 = I915_READ(CSIEC);
@@ -1484,6 +1492,8 @@ unsigned long i915_chipset_val(struct drm_i915_private *dev_priv)
 	dev_priv->last_count1 = total_count;
 	dev_priv->last_time1 = now;
 
+	dev_priv->chipset_power = ret;
+
 	return ret;
 }
 

drivers/gpu/drm/i915/i915_drv.c

@@ -58,15 +58,15 @@ module_param_named(powersave, i915_powersave, int, 0600);
 MODULE_PARM_DESC(powersave,
 		"Enable powersavings, fbc, downclocking, etc. (default: true)");
 
-unsigned int i915_semaphores __read_mostly = 0;
+int i915_semaphores __read_mostly = -1;
 module_param_named(semaphores, i915_semaphores, int, 0600);
 MODULE_PARM_DESC(semaphores,
-		"Use semaphores for inter-ring sync (default: false)");
+		"Use semaphores for inter-ring sync (default: -1 (use per-chip defaults))");
 
-unsigned int i915_enable_rc6 __read_mostly = 0;
+int i915_enable_rc6 __read_mostly = -1;
 module_param_named(i915_enable_rc6, i915_enable_rc6, int, 0600);
 MODULE_PARM_DESC(i915_enable_rc6,
-		"Enable power-saving render C-state 6 (default: true)");
+		"Enable power-saving render C-state 6 (default: -1 (use per-chip default)");
 
 int i915_enable_fbc __read_mostly = -1;
 module_param_named(i915_enable_fbc, i915_enable_fbc, int, 0600);
@@ -328,7 +328,7 @@ void intel_detect_pch(struct drm_device *dev)
 	}
 }
 
-static void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv)
+void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv)
 {
 	int count;
 
@@ -344,6 +344,22 @@ static void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv)
 		udelay(10);
 }
 
+void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv)
+{
+	int count;
+
+	count = 0;
+	while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_MT_ACK) & 1))
+		udelay(10);
+
+	I915_WRITE_NOTRACE(FORCEWAKE_MT, (1<<16) | 1);
+	POSTING_READ(FORCEWAKE_MT);
+
+	count = 0;
+	while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_MT_ACK) & 1) == 0)
+		udelay(10);
+}
+
 /*
  * Generally this is called implicitly by the register read function. However,
  * if some sequence requires the GT to not power down then this function should
@@ -356,15 +372,21 @@ void gen6_gt_force_wake_get(struct drm_i915_private *dev_priv)
 
 	/* Forcewake is atomic in case we get in here without the lock */
 	if (atomic_add_return(1, &dev_priv->forcewake_count) == 1)
-		__gen6_gt_force_wake_get(dev_priv);
+		dev_priv->display.force_wake_get(dev_priv);
 }
 
-static void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv)
+void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv)
 {
 	I915_WRITE_NOTRACE(FORCEWAKE, 0);
 	POSTING_READ(FORCEWAKE);
 }
 
+void __gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv)
+{
+	I915_WRITE_NOTRACE(FORCEWAKE_MT, (1<<16) | 0);
+	POSTING_READ(FORCEWAKE_MT);
+}
+
 /*
  * see gen6_gt_force_wake_get()
  */
@@ -373,7 +395,7 @@ void gen6_gt_force_wake_put(struct drm_i915_private *dev_priv)
 	WARN_ON(!mutex_is_locked(&dev_priv->dev->struct_mutex));
 
 	if (atomic_dec_and_test(&dev_priv->forcewake_count))
-		__gen6_gt_force_wake_put(dev_priv);
+		dev_priv->display.force_wake_put(dev_priv);
 }
 
 void __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv)
@@ -903,8 +925,9 @@ MODULE_LICENSE("GPL and additional rights");
 /* We give fast paths for the really cool registers */
 #define NEEDS_FORCE_WAKE(dev_priv, reg) \
 	(((dev_priv)->info->gen >= 6) && \
-	((reg) < 0x40000) && \
-	((reg) != FORCEWAKE))
+	 ((reg) < 0x40000) &&		 \
+	 ((reg) != FORCEWAKE) &&	 \
+	 ((reg) != ECOBUS))
 
 #define __i915_read(x, y) \
 u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg) { \

drivers/gpu/drm/i915/i915_drv.h

@@ -107,6 +107,7 @@ struct opregion_header;
 struct opregion_acpi;
 struct opregion_swsci;
 struct opregion_asle;
+struct drm_i915_private;
 
 struct intel_opregion {
 	struct opregion_header *header;
@@ -221,6 +222,8 @@ struct drm_i915_display_funcs {
 			  struct drm_i915_gem_object *obj);
 	int (*update_plane)(struct drm_crtc *crtc, struct drm_framebuffer *fb,
 			    int x, int y);
+	void (*force_wake_get)(struct drm_i915_private *dev_priv);
+	void (*force_wake_put)(struct drm_i915_private *dev_priv);
 	/* clock updates for mode set */
 	/* cursor updates */
 	/* render clock increase/decrease */
@@ -710,6 +713,7 @@ typedef struct drm_i915_private {
 
 	u64 last_count1;
 	unsigned long last_time1;
+	unsigned long chipset_power;
 	u64 last_count2;
 	struct timespec last_time2;
 	unsigned long gfx_power;
@@ -998,11 +1002,11 @@ extern int i915_max_ioctl;
 extern unsigned int i915_fbpercrtc __always_unused;
 extern int i915_panel_ignore_lid __read_mostly;
 extern unsigned int i915_powersave __read_mostly;
-extern unsigned int i915_semaphores __read_mostly;
+extern int i915_semaphores __read_mostly;
 extern unsigned int i915_lvds_downclock __read_mostly;
 extern int i915_panel_use_ssc __read_mostly;
 extern int i915_vbt_sdvo_panel_type __read_mostly;
-extern unsigned int i915_enable_rc6 __read_mostly;
+extern int i915_enable_rc6 __read_mostly;
 extern int i915_enable_fbc __read_mostly;
 extern bool i915_enable_hangcheck __read_mostly;
 
@@ -1308,6 +1312,11 @@ extern void gen6_set_rps(struct drm_device *dev, u8 val);
 extern void intel_detect_pch(struct drm_device *dev);
 extern int intel_trans_dp_port_sel(struct drm_crtc *crtc);
 
+extern void __gen6_gt_force_wake_get(struct drm_i915_private *dev_priv);
+extern void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv);
+extern void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv);
+extern void __gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv);
+
 /* overlay */
 #ifdef CONFIG_DEBUG_FS
 extern struct intel_overlay_error_state *intel_overlay_capture_error_state(struct drm_device *dev);
@@ -1352,8 +1361,9 @@ void __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv);
 /* We give fast paths for the really cool registers */
 #define NEEDS_FORCE_WAKE(dev_priv, reg) \
 	(((dev_priv)->info->gen >= 6) && \
-	((reg) < 0x40000) && \
-	((reg) != FORCEWAKE))
+	 ((reg) < 0x40000) &&		 \
+	 ((reg) != FORCEWAKE) &&	 \
+	 ((reg) != ECOBUS))
 
 #define __i915_read(x, y) \
 	u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg);

drivers/gpu/drm/i915/i915_gem.c

@@ -2026,13 +2026,8 @@ i915_wait_request(struct intel_ring_buffer *ring,
 	 * to handle this, the waiter on a request often wants an associated
 	 * buffer to have made it to the inactive list, and we would need
 	 * a separate wait queue to handle that.
-	 *
-	 * To avoid a recursion with the ilk VT-d workaround (that calls
-	 * gpu_idle when unbinding objects with interruptible==false) don't
-	 * retire requests in that case (because it might call unbind if the
-	 * active list holds the last reference to the object).
 	 */
-	if (ret == 0 && dev_priv->mm.interruptible)
+	if (ret == 0)
 		i915_gem_retire_requests_ring(ring);
 
 	return ret;

drivers/gpu/drm/i915/i915_gem_execbuffer.c

@@ -32,6 +32,7 @@
 #include "i915_drv.h"
 #include "i915_trace.h"
 #include "intel_drv.h"
+#include <linux/dma_remapping.h>
 
 struct change_domains {
 	uint32_t invalidate_domains;
@@ -746,6 +747,22 @@ i915_gem_execbuffer_flush(struct drm_device *dev,
 	return 0;
 }
 
+static bool
+intel_enable_semaphores(struct drm_device *dev)
+{
+	if (INTEL_INFO(dev)->gen < 6)
+		return 0;
+
+	if (i915_semaphores >= 0)
+		return i915_semaphores;
+
+	/* Enable semaphores on SNB when IO remapping is off */
+	if (INTEL_INFO(dev)->gen == 6)
+		return !intel_iommu_enabled;
+
+	return 1;
+}
+
 static int
 i915_gem_execbuffer_sync_rings(struct drm_i915_gem_object *obj,
 			       struct intel_ring_buffer *to)
@@ -758,7 +775,7 @@ i915_gem_execbuffer_sync_rings(struct drm_i915_gem_object *obj,
 		return 0;
 
 	/* XXX gpu semaphores are implicated in various hard hangs on SNB */
-	if (INTEL_INFO(obj->base.dev)->gen < 6 || !i915_semaphores)
+	if (!intel_enable_semaphores(obj->base.dev))
 		return i915_gem_object_wait_rendering(obj);
 
 	idx = intel_ring_sync_index(from, to);

drivers/gpu/drm/i915/i915_reg.h

@@ -3303,10 +3303,10 @@
 /* or SDVOB */
 #define HDMIB   0xe1140
 #define  PORT_ENABLE    (1 << 31)
-#define  TRANSCODER_A   (0)
-#define  TRANSCODER_B   (1 << 30)
-#define  TRANSCODER(pipe)	((pipe) << 30)
-#define  TRANSCODER_MASK   (1 << 30)
+#define  TRANSCODER(pipe)       ((pipe) << 30)
+#define  TRANSCODER_CPT(pipe)   ((pipe) << 29)
+#define  TRANSCODER_MASK        (1 << 30)
+#define  TRANSCODER_MASK_CPT    (3 << 29)
 #define  COLOR_FORMAT_8bpc      (0)
 #define  COLOR_FORMAT_12bpc     (3 << 26)
 #define  SDVOB_HOTPLUG_ENABLE   (1 << 23)
@@ -3447,8 +3447,30 @@
 #define  EDP_LINK_TRAIN_800_1200MV_0DB_SNB_B	(0x38<<22)
 #define  EDP_LINK_TRAIN_VOL_EMP_MASK_SNB	(0x3f<<22)
 
+/* IVB */
+#define EDP_LINK_TRAIN_400MV_0DB_IVB		(0x24 <<22)
+#define EDP_LINK_TRAIN_400MV_3_5DB_IVB		(0x2a <<22)
+#define EDP_LINK_TRAIN_400MV_6DB_IVB		(0x2f <<22)
+#define EDP_LINK_TRAIN_600MV_0DB_IVB		(0x30 <<22)
+#define EDP_LINK_TRAIN_600MV_3_5DB_IVB		(0x36 <<22)
+#define EDP_LINK_TRAIN_800MV_0DB_IVB		(0x38 <<22)
+#define EDP_LINK_TRAIN_800MV_3_5DB_IVB		(0x33 <<22)
+
+/* legacy values */
+#define EDP_LINK_TRAIN_500MV_0DB_IVB		(0x00 <<22)
+#define EDP_LINK_TRAIN_1000MV_0DB_IVB		(0x20 <<22)
+#define EDP_LINK_TRAIN_500MV_3_5DB_IVB		(0x02 <<22)
+#define EDP_LINK_TRAIN_1000MV_3_5DB_IVB		(0x22 <<22)
+#define EDP_LINK_TRAIN_1000MV_6DB_IVB		(0x23 <<22)
+
+#define  EDP_LINK_TRAIN_VOL_EMP_MASK_IVB	(0x3f<<22)
+
 #define  FORCEWAKE				0xA18C
 #define  FORCEWAKE_ACK				0x130090
+#define  FORCEWAKE_MT				0xa188 /* multi-threaded */
+#define  FORCEWAKE_MT_ACK			0x130040
+#define  ECOBUS					0xa180
+#define    FORCEWAKE_MT_ENABLE			(1<<5)
 
 #define  GT_FIFO_FREE_ENTRIES			0x120008
 #define    GT_FIFO_NUM_RESERVED_ENTRIES		20

drivers/gpu/drm/i915/intel_display.c

@@ -38,8 +38,8 @@
 #include "i915_drv.h"
 #include "i915_trace.h"
 #include "drm_dp_helper.h"
-
 #include "drm_crtc_helper.h"
+#include <linux/dma_remapping.h>
 
 #define HAS_eDP (intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))
 
@@ -4670,6 +4670,7 @@ static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
 /**
  * intel_choose_pipe_bpp_dither - figure out what color depth the pipe should send
  * @crtc: CRTC structure
+ * @mode: requested mode
  *
  * A pipe may be connected to one or more outputs.  Based on the depth of the
  * attached framebuffer, choose a good color depth to use on the pipe.
@@ -4681,13 +4682,15 @@ static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
  *    HDMI supports only 8bpc or 12bpc, so clamp to 8bpc with dither for 10bpc
  *    Displays may support a restricted set as well, check EDID and clamp as
  *      appropriate.
+ *    DP may want to dither down to 6bpc to fit larger modes
  *
  * RETURNS:
  * Dithering requirement (i.e. false if display bpc and pipe bpc match,
  * true if they don't match).
  */
 static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
-					 unsigned int *pipe_bpp)
+					 unsigned int *pipe_bpp,
+					 struct drm_display_mode *mode)
 {
 	struct drm_device *dev = crtc->dev;
 	struct drm_i915_private *dev_priv = dev->dev_private;
@@ -4758,6 +4761,11 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc,
 		}
 	}
 
+	if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
+		DRM_DEBUG_KMS("Dithering DP to 6bpc\n");
+		display_bpc = 6;
+	}
+
 	/*
 	 * We could just drive the pipe at the highest bpc all the time and
 	 * enable dithering as needed, but that costs bandwidth.  So choose
@@ -5019,6 +5027,16 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc,
 			pipeconf &= ~PIPECONF_DOUBLE_WIDE;
 	}
 
+	/* default to 8bpc */
+	pipeconf &= ~(PIPECONF_BPP_MASK | PIPECONF_DITHER_EN);
+	if (is_dp) {
+		if (mode->private_flags & INTEL_MODE_DP_FORCE_6BPC) {
+			pipeconf |= PIPECONF_BPP_6 |
+				    PIPECONF_DITHER_EN |
+				    PIPECONF_DITHER_TYPE_SP;
+		}
+	}
+
 	dpll |= DPLL_VCO_ENABLE;
 
 	DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B');
@@ -5480,7 +5498,7 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc,
 	/* determine panel color depth */
 	temp = I915_READ(PIPECONF(pipe));
 	temp &= ~PIPE_BPC_MASK;
-	dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp);
+	dither = intel_choose_pipe_bpp_dither(crtc, &pipe_bpp, mode);
 	switch (pipe_bpp) {
 	case 18:
 		temp |= PIPE_6BPC;
@@ -7189,11 +7207,16 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
 	work->old_fb_obj = intel_fb->obj;
 	INIT_WORK(&work->work, intel_unpin_work_fn);
 
+	ret = drm_vblank_get(dev, intel_crtc->pipe);
+	if (ret)
+		goto free_work;
+
 	/* We borrow the event spin lock for protecting unpin_work */
 	spin_lock_irqsave(&dev->event_lock, flags);
 	if (intel_crtc->unpin_work) {
 		spin_unlock_irqrestore(&dev->event_lock, flags);
 		kfree(work);
+		drm_vblank_put(dev, intel_crtc->pipe);
 
 		DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
 		return -EBUSY;
@@ -7212,10 +7235,6 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
 
 	crtc->fb = fb;
 
-	ret = drm_vblank_get(dev, intel_crtc->pipe);
-	if (ret)
-		goto cleanup_objs;
-
 	work->pending_flip_obj = obj;
 
 	work->enable_stall_check = true;
@@ -7238,7 +7257,6 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc,
 
 cleanup_pending:
 	atomic_sub(1 << intel_crtc->plane, &work->old_fb_obj->pending_flip);
-cleanup_objs:
 	drm_gem_object_unreference(&work->old_fb_obj->base);
 	drm_gem_object_unreference(&obj->base);
 	mutex_unlock(&dev->struct_mutex);
@@ -7247,6 +7265,8 @@ cleanup_objs:
 	intel_crtc->unpin_work = NULL;
 	spin_unlock_irqrestore(&dev->event_lock, flags);
 
+	drm_vblank_put(dev, intel_crtc->pipe);
+free_work:
 	kfree(work);
 
 	return ret;
@@ -7887,6 +7907,33 @@ void intel_init_emon(struct drm_device *dev)
 	dev_priv->corr = (lcfuse & LCFUSE_HIV_MASK);
 }
 
+static bool intel_enable_rc6(struct drm_device *dev)
+{
+	/*
+	 * Respect the kernel parameter if it is set
+	 */
+	if (i915_enable_rc6 >= 0)
+		return i915_enable_rc6;
+
+	/*
+	 * Disable RC6 on Ironlake
+	 */
+	if (INTEL_INFO(dev)->gen == 5)
+		return 0;
+
+	/*
+	 * Enable rc6 on Sandybridge if DMA remapping is disabled
+	 */
+	if (INTEL_INFO(dev)->gen == 6) {
+		DRM_DEBUG_DRIVER("Sandybridge: intel_iommu_enabled %s -- RC6 %sabled\n",
+				 intel_iommu_enabled ? "true" : "false",
+				 !intel_iommu_enabled ? "en" : "dis");
+		return !intel_iommu_enabled;
+	}
+	DRM_DEBUG_DRIVER("RC6 enabled\n");
+	return 1;
+}
+
 void gen6_enable_rps(struct drm_i915_private *dev_priv)
 {
 	u32 rp_state_cap = I915_READ(GEN6_RP_STATE_CAP);
@@ -7923,7 +7970,7 @@ void gen6_enable_rps(struct drm_i915_private *dev_priv)
 	I915_WRITE(GEN6_RC6p_THRESHOLD, 100000);
 	I915_WRITE(GEN6_RC6pp_THRESHOLD, 64000); /* unused */
 
-	if (i915_enable_rc6)
+	if (intel_enable_rc6(dev_priv->dev))
 		rc6_mask = GEN6_RC_CTL_RC6p_ENABLE |
 			GEN6_RC_CTL_RC6_ENABLE;
 
@@ -8372,7 +8419,7 @@ void ironlake_enable_rc6(struct drm_device *dev)
 	/* rc6 disabled by default due to repeated reports of hanging during
 	 * boot and resume.
 	 */
-	if (!i915_enable_rc6)
+	if (!intel_enable_rc6(dev))
 		return;
 
 	mutex_lock(&dev->struct_mutex);
@@ -8491,6 +8538,28 @@ static void intel_init_display(struct drm_device *dev)
 
 	/* For FIFO watermark updates */
 	if (HAS_PCH_SPLIT(dev)) {
+		dev_priv->display.force_wake_get = __gen6_gt_force_wake_get;
+		dev_priv->display.force_wake_put = __gen6_gt_force_wake_put;
+
+		/* IVB configs may use multi-threaded forcewake */
+		if (IS_IVYBRIDGE(dev)) {
+			u32	ecobus;
+
+			mutex_lock(&dev->struct_mutex);
+			__gen6_gt_force_wake_mt_get(dev_priv);
+			ecobus = I915_READ(ECOBUS);
+			__gen6_gt_force_wake_mt_put(dev_priv);
+			mutex_unlock(&dev->struct_mutex);
+
+			if (ecobus & FORCEWAKE_MT_ENABLE) {
+				DRM_DEBUG_KMS("Using MT version of forcewake\n");
+				dev_priv->display.force_wake_get =
+					__gen6_gt_force_wake_mt_get;
+				dev_priv->display.force_wake_put =
+					__gen6_gt_force_wake_mt_put;
+			}
+		}
+
 		if (HAS_PCH_IBX(dev))
 			dev_priv->display.init_pch_clock_gating = ibx_init_clock_gating;
 		else if (HAS_PCH_CPT(dev))

drivers/gpu/drm/i915/intel_dp.c

@@ -208,13 +208,15 @@ intel_dp_link_clock(uint8_t link_bw)
  */
 
 static int
-intel_dp_link_required(struct intel_dp *intel_dp, int pixel_clock)
+intel_dp_link_required(struct intel_dp *intel_dp, int pixel_clock, int check_bpp)
 {
 	struct drm_crtc *crtc = intel_dp->base.base.crtc;
 	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
 	int bpp = 24;
 
-	if (intel_crtc)
+	if (check_bpp)
+		bpp = check_bpp;
+	else if (intel_crtc)
 		bpp = intel_crtc->bpp;
 
 	return (pixel_clock * bpp + 9) / 10;
@@ -233,6 +235,7 @@ intel_dp_mode_valid(struct drm_connector *connector,
 	struct intel_dp *intel_dp = intel_attached_dp(connector);
 	int max_link_clock = intel_dp_link_clock(intel_dp_max_link_bw(intel_dp));
 	int max_lanes = intel_dp_max_lane_count(intel_dp);
+	int max_rate, mode_rate;
 
 	if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) {
 		if (mode->hdisplay > intel_dp->panel_fixed_mode->hdisplay)
@@ -242,9 +245,17 @@ intel_dp_mode_valid(struct drm_connector *connector,
 			return MODE_PANEL;
 	}
 
-	if (intel_dp_link_required(intel_dp, mode->clock)
-	    > intel_dp_max_data_rate(max_link_clock, max_lanes))
-		return MODE_CLOCK_HIGH;
+	mode_rate = intel_dp_link_required(intel_dp, mode->clock, 0);
+	max_rate = intel_dp_max_data_rate(max_link_clock, max_lanes);
+
+	if (mode_rate > max_rate) {
+			mode_rate = intel_dp_link_required(intel_dp,
+							   mode->clock, 18);
+			if (mode_rate > max_rate)
+				return MODE_CLOCK_HIGH;
+			else
+				mode->private_flags |= INTEL_MODE_DP_FORCE_6BPC;
+	}
 
 	if (mode->clock < 10000)
 		return MODE_CLOCK_LOW;
@@ -362,8 +373,8 @@ intel_dp_aux_ch(struct intel_dp *intel_dp,
 	 * clock divider.
 	 */
 	if (is_cpu_edp(intel_dp)) {
-		if (IS_GEN6(dev))
-			aux_clock_divider = 200; /* SNB eDP input clock at 400Mhz */
+		if (IS_GEN6(dev) || IS_GEN7(dev))
+			aux_clock_divider = 200; /* SNB & IVB eDP input clock at 400Mhz */
 		else
 			aux_clock_divider = 225; /* eDP input clock at 450Mhz */
 	} else if (HAS_PCH_SPLIT(dev))
@@ -672,6 +683,7 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
 	int lane_count, clock;
 	int max_lane_count = intel_dp_max_lane_count(intel_dp);
 	int max_clock = intel_dp_max_link_bw(intel_dp) == DP_LINK_BW_2_7 ? 1 : 0;
+	int bpp = mode->private_flags & INTEL_MODE_DP_FORCE_6BPC ? 18 : 0;
 	static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 };
 
 	if (is_edp(intel_dp) && intel_dp->panel_fixed_mode) {
@@ -689,7 +701,7 @@ intel_dp_mode_fixup(struct drm_encoder *encoder, struct drm_display_mode *mode,
 		for (clock = 0; clock <= max_clock; clock++) {
 			int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count);
 
-			if (intel_dp_link_required(intel_dp, mode->clock)
+			if (intel_dp_link_required(intel_dp, mode->clock, bpp)
 					<= link_avail) {
 				intel_dp->link_bw = bws[clock];
 				intel_dp->lane_count = lane_count;
@@ -817,10 +829,11 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
 	}
 
 	/*
-	 * There are three kinds of DP registers:
+	 * There are four kinds of DP registers:
 	 *
 	 * 	IBX PCH
-	 * 	CPU
+	 * 	SNB CPU
+	 *	IVB CPU
 	 * 	CPT PCH
 	 *
 	 * IBX PCH and CPU are the same for almost everything,
@@ -873,7 +886,25 @@ intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode,
 
 	/* Split out the IBX/CPU vs CPT settings */
 
-	if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) {
+	if (is_cpu_edp(intel_dp) && IS_GEN7(dev)) {
+		if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
+			intel_dp->DP |= DP_SYNC_HS_HIGH;
+		if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
+			intel_dp->DP |= DP_SYNC_VS_HIGH;
+		intel_dp->DP |= DP_LINK_TRAIN_OFF_CPT;
+
+		if (intel_dp->link_configuration[1] & DP_LANE_COUNT_ENHANCED_FRAME_EN)
+			intel_dp->DP |= DP_ENHANCED_FRAMING;
+
+		intel_dp->DP |= intel_crtc->pipe << 29;
+
+		/* don't miss out required setting for eDP */
+		intel_dp->DP |= DP_PLL_ENABLE;
+		if (adjusted_mode->clock < 200000)
+			intel_dp->DP |= DP_PLL_FREQ_160MHZ;
+		else
+			intel_dp->DP |= DP_PLL_FREQ_270MHZ;
+	} else if (!HAS_PCH_CPT(dev) || is_cpu_edp(intel_dp)) {
 		intel_dp->DP |= intel_dp->color_range;
 
 		if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
@@ -1375,34 +1406,59 @@ static char	*link_train_names[] = {
  * These are source-specific values; current Intel hardware supports
  * a maximum voltage of 800mV and a maximum pre-emphasis of 6dB
  */
-#define I830_DP_VOLTAGE_MAX	    DP_TRAIN_VOLTAGE_SWING_800
-#define I830_DP_VOLTAGE_MAX_CPT	    DP_TRAIN_VOLTAGE_SWING_1200
 
 static uint8_t
-intel_dp_pre_emphasis_max(uint8_t voltage_swing)
+intel_dp_voltage_max(struct intel_dp *intel_dp)
 {
-	switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
-	case DP_TRAIN_VOLTAGE_SWING_400:
-		return DP_TRAIN_PRE_EMPHASIS_6;
-	case DP_TRAIN_VOLTAGE_SWING_600:
-		return DP_TRAIN_PRE_EMPHASIS_6;
-	case DP_TRAIN_VOLTAGE_SWING_800:
-		return DP_TRAIN_PRE_EMPHASIS_3_5;
-	case DP_TRAIN_VOLTAGE_SWING_1200:
-	default:
-		return DP_TRAIN_PRE_EMPHASIS_0;
+	struct drm_device *dev = intel_dp->base.base.dev;
+
+	if (IS_GEN7(dev) && is_cpu_edp(intel_dp))
+		return DP_TRAIN_VOLTAGE_SWING_800;
+	else if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
+		return DP_TRAIN_VOLTAGE_SWING_1200;
+	else
+		return DP_TRAIN_VOLTAGE_SWING_800;
+}
+
+static uint8_t
+intel_dp_pre_emphasis_max(struct intel_dp *intel_dp, uint8_t voltage_swing)
+{
+	struct drm_device *dev = intel_dp->base.base.dev;
+
+	if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) {
+		switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
+		case DP_TRAIN_VOLTAGE_SWING_400:
+			return DP_TRAIN_PRE_EMPHASIS_6;
+		case DP_TRAIN_VOLTAGE_SWING_600:
+		case DP_TRAIN_VOLTAGE_SWING_800:
+			return DP_TRAIN_PRE_EMPHASIS_3_5;
+		default:
+			return DP_TRAIN_PRE_EMPHASIS_0;
+		}
+	} else {
+		switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
+		case DP_TRAIN_VOLTAGE_SWING_400:
+			return DP_TRAIN_PRE_EMPHASIS_6;
+		case DP_TRAIN_VOLTAGE_SWING_600:
+			return DP_TRAIN_PRE_EMPHASIS_6;
+		case DP_TRAIN_VOLTAGE_SWING_800:
+			return DP_TRAIN_PRE_EMPHASIS_3_5;
+		case DP_TRAIN_VOLTAGE_SWING_1200:
+		default:
+			return DP_TRAIN_PRE_EMPHASIS_0;
+		}
 	}
 }
 
 static void
 intel_get_adjust_train(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_STATUS_SIZE])
 {
-	struct drm_device *dev = intel_dp->base.base.dev;
 	uint8_t v = 0;
 	uint8_t p = 0;
 	int lane;
 	uint8_t	*adjust_request = link_status + (DP_ADJUST_REQUEST_LANE0_1 - DP_LANE0_1_STATUS);
-	int voltage_max;
+	uint8_t voltage_max;
+	uint8_t preemph_max;
 
 	for (lane = 0; lane < intel_dp->lane_count; lane++) {
 		uint8_t this_v = intel_get_adjust_request_voltage(adjust_request, lane);
@@ -1414,15 +1470,13 @@ intel_get_adjust_train(struct intel_dp *intel_dp, uint8_t link_status[DP_LINK_ST
 			p = this_p;
 	}
 
-	if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
-		voltage_max = I830_DP_VOLTAGE_MAX_CPT;
-	else
-		voltage_max = I830_DP_VOLTAGE_MAX;
+	voltage_max = intel_dp_voltage_max(intel_dp);
 	if (v >= voltage_max)
 		v = voltage_max | DP_TRAIN_MAX_SWING_REACHED;
 
-	if (p >= intel_dp_pre_emphasis_max(v))
-		p = intel_dp_pre_emphasis_max(v) | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
+	preemph_max = intel_dp_pre_emphasis_max(intel_dp, v);
+	if (p >= preemph_max)
+		p = preemph_max | DP_TRAIN_MAX_PRE_EMPHASIS_REACHED;
 
 	for (lane = 0; lane < 4; lane++)
 		intel_dp->train_set[lane] = v | p;
@@ -1494,6 +1548,37 @@ intel_gen6_edp_signal_levels(uint8_t train_set)
 	}
 }
 
+/* Gen7's DP voltage swing and pre-emphasis control */
+static uint32_t
+intel_gen7_edp_signal_levels(uint8_t train_set)
+{
+	int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
+					 DP_TRAIN_PRE_EMPHASIS_MASK);
+	switch (signal_levels) {
+	case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_0:
+		return EDP_LINK_TRAIN_400MV_0DB_IVB;
+	case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_3_5:
+		return EDP_LINK_TRAIN_400MV_3_5DB_IVB;
+	case DP_TRAIN_VOLTAGE_SWING_400 | DP_TRAIN_PRE_EMPHASIS_6:
+		return EDP_LINK_TRAIN_400MV_6DB_IVB;
+
+	case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_0:
+		return EDP_LINK_TRAIN_600MV_0DB_IVB;
+	case DP_TRAIN_VOLTAGE_SWING_600 | DP_TRAIN_PRE_EMPHASIS_3_5:
+		return EDP_LINK_TRAIN_600MV_3_5DB_IVB;
+
+	case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_0:
+		return EDP_LINK_TRAIN_800MV_0DB_IVB;
+	case DP_TRAIN_VOLTAGE_SWING_800 | DP_TRAIN_PRE_EMPHASIS_3_5:
+		return EDP_LINK_TRAIN_800MV_3_5DB_IVB;
+
+	default:
+		DRM_DEBUG_KMS("Unsupported voltage swing/pre-emphasis level:"
+			      "0x%x\n", signal_levels);
+		return EDP_LINK_TRAIN_500MV_0DB_IVB;
+	}
+}
+
 static uint8_t
 intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE],
 		      int lane)
@@ -1599,7 +1684,8 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
 				  DP_LINK_CONFIGURATION_SIZE);
 
 	DP |= DP_PORT_EN;
-	if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
+
+	if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp)))
 		DP &= ~DP_LINK_TRAIN_MASK_CPT;
 	else
 		DP &= ~DP_LINK_TRAIN_MASK;
@@ -1613,7 +1699,11 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
 		uint8_t	    link_status[DP_LINK_STATUS_SIZE];
 		uint32_t    signal_levels;
 
-		if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
+
+		if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) {
+			signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]);
+			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels;
+		} else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
 			signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
 			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
 		} else {
@@ -1622,7 +1712,7 @@ intel_dp_start_link_train(struct intel_dp *intel_dp)
 			DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
 		}
 
-		if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
+		if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp)))
 			reg = DP | DP_LINK_TRAIN_PAT_1_CPT;
 		else
 			reg = DP | DP_LINK_TRAIN_PAT_1;
@@ -1703,7 +1793,10 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
 			break;
 		}
 
-		if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
+		if (IS_GEN7(dev) && is_cpu_edp(intel_dp)) {
+			signal_levels = intel_gen7_edp_signal_levels(intel_dp->train_set[0]);
+			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_IVB) | signal_levels;
+		} else if (IS_GEN6(dev) && is_cpu_edp(intel_dp)) {
 			signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
 			DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
 		} else {
@@ -1711,7 +1804,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
 			DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
 		}
 
-		if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
+		if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp)))
 			reg = DP | DP_LINK_TRAIN_PAT_2_CPT;
 		else
 			reg = DP | DP_LINK_TRAIN_PAT_2;
@@ -1752,7 +1845,7 @@ intel_dp_complete_link_train(struct intel_dp *intel_dp)
 		++tries;
 	}
 
-	if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
+	if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp)))
 		reg = DP | DP_LINK_TRAIN_OFF_CPT;
 	else
 		reg = DP | DP_LINK_TRAIN_OFF;
@@ -1782,7 +1875,7 @@ intel_dp_link_down(struct intel_dp *intel_dp)
 		udelay(100);
 	}
 
-	if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp)) {
+	if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp))) {
 		DP &= ~DP_LINK_TRAIN_MASK_CPT;
 		I915_WRITE(intel_dp->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE_CPT);
 	} else {
@@ -1794,7 +1887,7 @@ intel_dp_link_down(struct intel_dp *intel_dp)
 	msleep(17);
 
 	if (is_edp(intel_dp)) {
-		if (HAS_PCH_CPT(dev) && !is_cpu_edp(intel_dp))
+		if (HAS_PCH_CPT(dev) && (IS_GEN7(dev) || !is_cpu_edp(intel_dp)))
 			DP |= DP_LINK_TRAIN_OFF_CPT;
 		else
 			DP |= DP_LINK_TRAIN_OFF;

drivers/gpu/drm/i915/intel_drv.h

@@ -110,6 +110,7 @@
 /* drm_display_mode->private_flags */
 #define INTEL_MODE_PIXEL_MULTIPLIER_SHIFT (0x0)
 #define INTEL_MODE_PIXEL_MULTIPLIER_MASK (0xf << INTEL_MODE_PIXEL_MULTIPLIER_SHIFT)
+#define INTEL_MODE_DP_FORCE_6BPC (0x10)
 
 static inline void
 intel_mode_set_pixel_multiplier(struct drm_display_mode *mode,

drivers/gpu/drm/i915/intel_lvds.c

@@ -715,6 +715,14 @@ static const struct dmi_system_id intel_no_lvds[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "EB1007"),
 		},
 	},
+	{
+		.callback = intel_no_lvds_dmi_callback,
+		.ident = "Asus AT5NM10T-I",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
+			DMI_MATCH(DMI_BOARD_NAME, "AT5NM10T-I"),
+		},
+	},
 
 	{ }	/* terminating entry */
 };

drivers/gpu/drm/i915/intel_panel.c

@@ -178,13 +178,10 @@ u32 intel_panel_get_max_backlight(struct drm_device *dev)
 	if (HAS_PCH_SPLIT(dev)) {
 		max >>= 16;
 	} else {
-		if (IS_PINEVIEW(dev)) {
+		if (INTEL_INFO(dev)->gen < 4)
 			max >>= 17;
-		} else {
+		else
 			max >>= 16;
-			if (INTEL_INFO(dev)->gen < 4)
-				max &= ~1;
-		}
 
 		if (is_backlight_combination_mode(dev))
 			max *= 0xff;
@@ -203,13 +200,12 @@ u32 intel_panel_get_backlight(struct drm_device *dev)
 		val = I915_READ(BLC_PWM_CPU_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
 	} else {
 		val = I915_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK;
-		if (IS_PINEVIEW(dev))
+		if (INTEL_INFO(dev)->gen < 4)
 			val >>= 1;
 
 		if (is_backlight_combination_mode(dev)) {
 			u8 lbpc;
 
-			val &= ~1;
 			pci_read_config_byte(dev->pdev, PCI_LBPC, &lbpc);
 			val *= lbpc;
 		}
@@ -246,11 +242,9 @@ static void intel_panel_actually_set_backlight(struct drm_device *dev, u32 level
 	}
 
 	tmp = I915_READ(BLC_PWM_CTL);
-	if (IS_PINEVIEW(dev)) {
-		tmp &= ~(BACKLIGHT_DUTY_CYCLE_MASK - 1);
+	if (INTEL_INFO(dev)->gen < 4) 
 		level <<= 1;
-	} else
-		tmp &= ~BACKLIGHT_DUTY_CYCLE_MASK;
+	tmp &= ~BACKLIGHT_DUTY_CYCLE_MASK;
 	I915_WRITE(BLC_PWM_CTL, tmp | level);
 }
 

drivers/gpu/drm/i915/intel_sdvo.c

@@ -50,6 +50,7 @@
 #define IS_TMDS(c)	(c->output_flag & SDVO_TMDS_MASK)
 #define IS_LVDS(c)	(c->output_flag & SDVO_LVDS_MASK)
 #define IS_TV_OR_LVDS(c) (c->output_flag & (SDVO_TV_MASK | SDVO_LVDS_MASK))
+#define IS_DIGITAL(c) (c->output_flag & (SDVO_TMDS_MASK | SDVO_LVDS_MASK))
 
 
 static const char *tv_format_names[] = {
@@ -1086,8 +1087,12 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder,
 		}
 		sdvox |= (9 << 19) | SDVO_BORDER_ENABLE;
 	}
-	if (intel_crtc->pipe == 1)
-		sdvox |= SDVO_PIPE_B_SELECT;
+
+	if (INTEL_PCH_TYPE(dev) >= PCH_CPT)
+		sdvox |= TRANSCODER_CPT(intel_crtc->pipe);
+	else
+		sdvox |= TRANSCODER(intel_crtc->pipe);
+
 	if (intel_sdvo->has_hdmi_audio)
 		sdvox |= SDVO_AUDIO_ENABLE;
 
@@ -1314,6 +1319,18 @@ intel_sdvo_tmds_sink_detect(struct drm_connector *connector)
 	return status;
 }
 
+static bool
+intel_sdvo_connector_matches_edid(struct intel_sdvo_connector *sdvo,
+				  struct edid *edid)
+{
+	bool monitor_is_digital = !!(edid->input & DRM_EDID_INPUT_DIGITAL);
+	bool connector_is_digital = !!IS_DIGITAL(sdvo);
+
+	DRM_DEBUG_KMS("connector_is_digital? %d, monitor_is_digital? %d\n",
+		      connector_is_digital, monitor_is_digital);
+	return connector_is_digital == monitor_is_digital;
+}
+
 static enum drm_connector_status
 intel_sdvo_detect(struct drm_connector *connector, bool force)
 {
@@ -1358,10 +1375,12 @@ intel_sdvo_detect(struct drm_connector *connector, bool force)
 		if (edid == NULL)
 			edid = intel_sdvo_get_analog_edid(connector);
 		if (edid != NULL) {
-			if (edid->input & DRM_EDID_INPUT_DIGITAL)
-				ret = connector_status_disconnected;
-			else
+			if (intel_sdvo_connector_matches_edid(intel_sdvo_connector,
+							      edid))
 				ret = connector_status_connected;
+			else
+				ret = connector_status_disconnected;
+
 			connector->display_info.raw_edid = NULL;
 			kfree(edid);
 		} else
@@ -1402,11 +1421,8 @@ static void intel_sdvo_get_ddc_modes(struct drm_connector *connector)
 		edid = intel_sdvo_get_analog_edid(connector);
 
 	if (edid != NULL) {
-		struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector);
-		bool monitor_is_digital = !!(edid->input & DRM_EDID_INPUT_DIGITAL);
-		bool connector_is_digital = !!IS_TMDS(intel_sdvo_connector);
-
-		if (connector_is_digital == monitor_is_digital) {
+		if (intel_sdvo_connector_matches_edid(to_intel_sdvo_connector(connector),
+						      edid)) {
 			drm_mode_connector_update_edid_property(connector, edid);
 			drm_add_edid_modes(connector, edid);
 		}

drivers/gpu/drm/vmwgfx/vmwgfx_drv.h

@@ -390,6 +390,11 @@ extern int vmw_context_check(struct vmw_private *dev_priv,
 			     struct ttm_object_file *tfile,
 			     int id,
 			     struct vmw_resource **p_res);
+extern int vmw_user_lookup_handle(struct vmw_private *dev_priv,
+				  struct ttm_object_file *tfile,
+				  uint32_t handle,
+				  struct vmw_surface **out_surf,
+				  struct vmw_dma_buffer **out_buf);
 extern void vmw_surface_res_free(struct vmw_resource *res);
 extern int vmw_surface_init(struct vmw_private *dev_priv,
 			    struct vmw_surface *srf,

drivers/gpu/drm/vmwgfx/vmwgfx_fifo.c

@@ -33,6 +33,7 @@ bool vmw_fifo_have_3d(struct vmw_private *dev_priv)
 {
 	__le32 __iomem *fifo_mem = dev_priv->mmio_virt;
 	uint32_t fifo_min, hwversion;
+	const struct vmw_fifo_state *fifo = &dev_priv->fifo;
 
 	if (!(dev_priv->capabilities & SVGA_CAP_EXTENDED_FIFO))
 		return false;
@@ -41,7 +42,12 @@ bool vmw_fifo_have_3d(struct vmw_private *dev_priv)
 	if (fifo_min <= SVGA_FIFO_3D_HWVERSION * sizeof(unsigned int))
 		return false;
 
-	hwversion = ioread32(fifo_mem + SVGA_FIFO_3D_HWVERSION);
+	hwversion = ioread32(fifo_mem +
+			     ((fifo->capabilities &
+			       SVGA_FIFO_CAP_3D_HWVERSION_REVISED) ?
+			      SVGA_FIFO_3D_HWVERSION_REVISED :
+			      SVGA_FIFO_3D_HWVERSION));
+
 	if (hwversion == 0)
 		return false;
 

drivers/gpu/drm/vmwgfx/vmwgfx_ioctl.c

@@ -58,8 +58,14 @@ int vmw_getparam_ioctl(struct drm_device *dev, void *data,
 	case DRM_VMW_PARAM_FIFO_HW_VERSION:
 	{
 		__le32 __iomem *fifo_mem = dev_priv->mmio_virt;
+		const struct vmw_fifo_state *fifo = &dev_priv->fifo;
 
-		param->value = ioread32(fifo_mem + SVGA_FIFO_3D_HWVERSION);
+		param->value =
+			ioread32(fifo_mem +
+				 ((fifo->capabilities &
+				   SVGA_FIFO_CAP_3D_HWVERSION_REVISED) ?
+				  SVGA_FIFO_3D_HWVERSION_REVISED :
+				  SVGA_FIFO_3D_HWVERSION));
 		break;
 	}
 	default:
@@ -166,13 +172,7 @@ int vmw_present_ioctl(struct drm_device *dev, void *data,
 		ret = -EINVAL;
 		goto out_no_fb;
 	}
-
 	vfb = vmw_framebuffer_to_vfb(obj_to_fb(obj));
-	if (!vfb->dmabuf) {
-		DRM_ERROR("Framebuffer not dmabuf backed.\n");
-		ret = -EINVAL;
-		goto out_no_fb;
-	}
 
 	ret = ttm_read_lock(&vmaster->lock, true);
 	if (unlikely(ret != 0))

drivers/gpu/drm/vmwgfx/vmwgfx_kms.c

@@ -31,6 +31,44 @@
 /* Might need a hrtimer here? */
 #define VMWGFX_PRESENT_RATE ((HZ / 60 > 0) ? HZ / 60 : 1)
 
+
+struct vmw_clip_rect {
+	int x1, x2, y1, y2;
+};
+
+/**
+ * Clip @num_rects number of @rects against @clip storing the
+ * results in @out_rects and the number of passed rects in @out_num.
+ */
+void vmw_clip_cliprects(struct drm_clip_rect *rects,
+			int num_rects,
+			struct vmw_clip_rect clip,
+			SVGASignedRect *out_rects,
+			int *out_num)
+{
+	int i, k;
+
+	for (i = 0, k = 0; i < num_rects; i++) {
+		int x1 = max_t(int, clip.x1, rects[i].x1);
+		int y1 = max_t(int, clip.y1, rects[i].y1);
+		int x2 = min_t(int, clip.x2, rects[i].x2);
+		int y2 = min_t(int, clip.y2, rects[i].y2);
+
+		if (x1 >= x2)
+			continue;
+		if (y1 >= y2)
+			continue;
+
+		out_rects[k].left   = x1;
+		out_rects[k].top    = y1;
+		out_rects[k].right  = x2;
+		out_rects[k].bottom = y2;
+		k++;
+	}
+
+	*out_num = k;
+}
+
 void vmw_display_unit_cleanup(struct vmw_display_unit *du)
 {
 	if (du->cursor_surface)
@@ -82,6 +120,43 @@ int vmw_cursor_update_image(struct vmw_private *dev_priv,
 	return 0;
 }
 
+int vmw_cursor_update_dmabuf(struct vmw_private *dev_priv,
+			     struct vmw_dma_buffer *dmabuf,
+			     u32 width, u32 height,
+			     u32 hotspotX, u32 hotspotY)
+{
+	struct ttm_bo_kmap_obj map;
+	unsigned long kmap_offset;
+	unsigned long kmap_num;
+	void *virtual;
+	bool dummy;
+	int ret;
+
+	kmap_offset = 0;
+	kmap_num = (width*height*4 + PAGE_SIZE - 1) >> PAGE_SHIFT;
+
+	ret = ttm_bo_reserve(&dmabuf->base, true, false, false, 0);
+	if (unlikely(ret != 0)) {
+		DRM_ERROR("reserve failed\n");
+		return -EINVAL;
+	}
+
+	ret = ttm_bo_kmap(&dmabuf->base, kmap_offset, kmap_num, &map);
+	if (unlikely(ret != 0))
+		goto err_unreserve;
+
+	virtual = ttm_kmap_obj_virtual(&map, &dummy);
+	ret = vmw_cursor_update_image(dev_priv, virtual, width, height,
+				      hotspotX, hotspotY);
+
+	ttm_bo_kunmap(&map);
+err_unreserve:
+	ttm_bo_unreserve(&dmabuf->base);
+
+	return ret;
+}
+
+
 void vmw_cursor_update_position(struct vmw_private *dev_priv,
 				bool show, int x, int y)
 {
@@ -110,24 +185,21 @@ int vmw_du_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv,
 		return -EINVAL;
 
 	if (handle) {
-		ret = vmw_user_surface_lookup_handle(dev_priv, tfile,
-						     handle, &surface);
-		if (!ret) {
-			if (!surface->snooper.image) {
-				DRM_ERROR("surface not suitable for cursor\n");
-				vmw_surface_unreference(&surface);
-				return -EINVAL;
-			}
-		} else {
-			ret = vmw_user_dmabuf_lookup(tfile,
-						     handle, &dmabuf);
-			if (ret) {
-				DRM_ERROR("failed to find surface or dmabuf: %i\n", ret);
-				return -EINVAL;
-			}
+		ret = vmw_user_lookup_handle(dev_priv, tfile,
+					     handle, &surface, &dmabuf);
+		if (ret) {
+			DRM_ERROR("failed to find surface or dmabuf: %i\n", ret);
+			return -EINVAL;
 		}
 	}
 
+	/* need to do this before taking down old image */
+	if (surface && !surface->snooper.image) {
+		DRM_ERROR("surface not suitable for cursor\n");
+		vmw_surface_unreference(&surface);
+		return -EINVAL;
+	}
+
 	/* takedown old cursor */
 	if (du->cursor_surface) {
 		du->cursor_surface->snooper.crtc = NULL;
@@ -146,36 +218,11 @@ int vmw_du_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file_priv,
 		vmw_cursor_update_image(dev_priv, surface->snooper.image,
 					64, 64, du->hotspot_x, du->hotspot_y);
 	} else if (dmabuf) {
-		struct ttm_bo_kmap_obj map;
-		unsigned long kmap_offset;
-		unsigned long kmap_num;
-		void *virtual;
-		bool dummy;
-
 		/* vmw_user_surface_lookup takes one reference */
 		du->cursor_dmabuf = dmabuf;
 
-		kmap_offset = 0;
-		kmap_num = (64*64*4) >> PAGE_SHIFT;
-
-		ret = ttm_bo_reserve(&dmabuf->base, true, false, false, 0);
-		if (unlikely(ret != 0)) {
-			DRM_ERROR("reserve failed\n");
-			return -EINVAL;
-		}
-
-		ret = ttm_bo_kmap(&dmabuf->base, kmap_offset, kmap_num, &map);
-		if (unlikely(ret != 0))
-			goto err_unreserve;
-
-		virtual = ttm_kmap_obj_virtual(&map, &dummy);
-		vmw_cursor_update_image(dev_priv, virtual, 64, 64,
-					du->hotspot_x, du->hotspot_y);
-
-		ttm_bo_kunmap(&map);
-err_unreserve:
-		ttm_bo_unreserve(&dmabuf->base);
-
+		ret = vmw_cursor_update_dmabuf(dev_priv, dmabuf, width, height,
+					       du->hotspot_x, du->hotspot_y);
 	} else {
 		vmw_cursor_update_position(dev_priv, false, 0, 0);
 		return 0;
@@ -377,8 +424,9 @@ static int do_surface_dirty_sou(struct vmw_private *dev_priv,
 				struct drm_clip_rect *clips,
 				unsigned num_clips, int inc)
 {
-	struct drm_clip_rect *clips_ptr;
 	struct vmw_display_unit *units[VMWGFX_NUM_DISPLAY_UNITS];
+	struct drm_clip_rect *clips_ptr;
+	struct drm_clip_rect *tmp;
 	struct drm_crtc *crtc;
 	size_t fifo_size;
 	int i, num_units;
@@ -391,7 +439,6 @@ static int do_surface_dirty_sou(struct vmw_private *dev_priv,
 	} *cmd;
 	SVGASignedRect *blits;
 
-
 	num_units = 0;
 	list_for_each_entry(crtc, &dev_priv->dev->mode_config.crtc_list,
 			    head) {
@@ -402,13 +449,24 @@ static int do_surface_dirty_sou(struct vmw_private *dev_priv,
 
 	BUG_ON(!clips || !num_clips);
 
+	tmp = kzalloc(sizeof(*tmp) * num_clips, GFP_KERNEL);
+	if (unlikely(tmp == NULL)) {
+		DRM_ERROR("Temporary cliprect memory alloc failed.\n");
+		return -ENOMEM;
+	}
+
 	fifo_size = sizeof(*cmd) + sizeof(SVGASignedRect) * num_clips;
 	cmd = kzalloc(fifo_size, GFP_KERNEL);
 	if (unlikely(cmd == NULL)) {
 		DRM_ERROR("Temporary fifo memory alloc failed.\n");
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto out_free_tmp;
 	}
 
+	/* setup blits pointer */
+	blits = (SVGASignedRect *)&cmd[1];
+
+	/* initial clip region */
 	left = clips->x1;
 	right = clips->x2;
 	top = clips->y1;
@@ -434,45 +492,60 @@ static int do_surface_dirty_sou(struct vmw_private *dev_priv,
 	cmd->body.srcRect.bottom = bottom;
 
 	clips_ptr = clips;
-	blits = (SVGASignedRect *)&cmd[1];
 	for (i = 0; i < num_clips; i++, clips_ptr += inc) {
-		blits[i].left   = clips_ptr->x1 - left;
-		blits[i].right  = clips_ptr->x2 - left;
-		blits[i].top    = clips_ptr->y1 - top;
-		blits[i].bottom = clips_ptr->y2 - top;
+		tmp[i].x1 = clips_ptr->x1 - left;
+		tmp[i].x2 = clips_ptr->x2 - left;
+		tmp[i].y1 = clips_ptr->y1 - top;
+		tmp[i].y2 = clips_ptr->y2 - top;
 	}
 
 	/* do per unit writing, reuse fifo for each */
 	for (i = 0; i < num_units; i++) {
 		struct vmw_display_unit *unit = units[i];
-		int clip_x1 = left - unit->crtc.x;
-		int clip_y1 = top - unit->crtc.y;
-		int clip_x2 = right - unit->crtc.x;
-		int clip_y2 = bottom - unit->crtc.y;
+		struct vmw_clip_rect clip;
+		int num;
+
+		clip.x1 = left - unit->crtc.x;
+		clip.y1 = top - unit->crtc.y;
+		clip.x2 = right - unit->crtc.x;
+		clip.y2 = bottom - unit->crtc.y;
 
 		/* skip any crtcs that misses the clip region */
-		if (clip_x1 >= unit->crtc.mode.hdisplay ||
-		    clip_y1 >= unit->crtc.mode.vdisplay ||
-		    clip_x2 <= 0 || clip_y2 <= 0)
+		if (clip.x1 >= unit->crtc.mode.hdisplay ||
+		    clip.y1 >= unit->crtc.mode.vdisplay ||
+		    clip.x2 <= 0 || clip.y2 <= 0)
 			continue;
 
+		/*
+		 * In order for the clip rects to be correctly scaled
+		 * the src and dest rects needs to be the same size.
+		 */
+		cmd->body.destRect.left = clip.x1;
+		cmd->body.destRect.right = clip.x2;
+		cmd->body.destRect.top = clip.y1;
+		cmd->body.destRect.bottom = clip.y2;
+
+		/* create a clip rect of the crtc in dest coords */
+		clip.x2 = unit->crtc.mode.hdisplay - clip.x1;
+		clip.y2 = unit->crtc.mode.vdisplay - clip.y1;
+		clip.x1 = 0 - clip.x1;
+		clip.y1 = 0 - clip.y1;
+
 		/* need to reset sid as it is changed by execbuf */
 		cmd->body.srcImage.sid = cpu_to_le32(framebuffer->user_handle);
-
 		cmd->body.destScreenId = unit->unit;
 
-		/*
-		 * The blit command is a lot more resilient then the
-		 * readback command when it comes to clip rects. So its
-		 * okay to go out of bounds.
-		 */
+		/* clip and write blits to cmd stream */
+		vmw_clip_cliprects(tmp, num_clips, clip, blits, &num);
 
-		cmd->body.destRect.left = clip_x1;
-		cmd->body.destRect.right = clip_x2;
-		cmd->body.destRect.top = clip_y1;
-		cmd->body.destRect.bottom = clip_y2;
+		/* if no cliprects hit skip this */
+		if (num == 0)
+			continue;
 
 
+		/* recalculate package length */
+		fifo_size = sizeof(*cmd) + sizeof(SVGASignedRect) * num;
+		cmd->header.size = cpu_to_le32(fifo_size - sizeof(cmd->header));
 		ret = vmw_execbuf_process(file_priv, dev_priv, NULL, cmd,
 					  fifo_size, 0, NULL);
 
@@ -480,7 +553,10 @@ static int do_surface_dirty_sou(struct vmw_private *dev_priv,
 			break;
 	}
 
+
 	kfree(cmd);
+out_free_tmp:
+	kfree(tmp);
 
 	return ret;
 }
@@ -556,6 +632,10 @@ static int vmw_kms_new_framebuffer_surface(struct vmw_private *dev_priv,
 	 * Sanity checks.
 	 */
 
+	/* Surface must be marked as a scanout. */
+	if (unlikely(!surface->scanout))
+		return -EINVAL;
+
 	if (unlikely(surface->mip_levels[0] != 1 ||
 		     surface->num_sizes != 1 ||
 		     surface->sizes[0].width < mode_cmd->width ||
@@ -782,6 +862,7 @@ static int do_dmabuf_dirty_sou(struct drm_file *file_priv,
 			int clip_y1 = clips_ptr->y1 - unit->crtc.y;
 			int clip_x2 = clips_ptr->x2 - unit->crtc.x;
 			int clip_y2 = clips_ptr->y2 - unit->crtc.y;
+			int move_x, move_y;
 
 			/* skip any crtcs that misses the clip region */
 			if (clip_x1 >= unit->crtc.mode.hdisplay ||
@@ -789,12 +870,21 @@ static int do_dmabuf_dirty_sou(struct drm_file *file_priv,
 			    clip_x2 <= 0 || clip_y2 <= 0)
 				continue;
 
+			/* clip size to crtc size */
+			clip_x2 = min_t(int, clip_x2, unit->crtc.mode.hdisplay);
+			clip_y2 = min_t(int, clip_y2, unit->crtc.mode.vdisplay);
+
+			/* translate both src and dest to bring clip into screen */
+			move_x = min_t(int, clip_x1, 0);
+			move_y = min_t(int, clip_y1, 0);
+
+			/* actual translate done here */
 			blits[hit_num].header = SVGA_CMD_BLIT_GMRFB_TO_SCREEN;
 			blits[hit_num].body.destScreenId = unit->unit;
-			blits[hit_num].body.srcOrigin.x = clips_ptr->x1;
-			blits[hit_num].body.srcOrigin.y = clips_ptr->y1;
-			blits[hit_num].body.destRect.left = clip_x1;
-			blits[hit_num].body.destRect.top = clip_y1;
+			blits[hit_num].body.srcOrigin.x = clips_ptr->x1 - move_x;
+			blits[hit_num].body.srcOrigin.y = clips_ptr->y1 - move_y;
+			blits[hit_num].body.destRect.left = clip_x1 - move_x;
+			blits[hit_num].body.destRect.top = clip_y1 - move_y;
 			blits[hit_num].body.destRect.right = clip_x2;
 			blits[hit_num].body.destRect.bottom = clip_y2;
 			hit_num++;
@@ -1033,46 +1123,29 @@ static struct drm_framebuffer *vmw_kms_fb_create(struct drm_device *dev,
 		return ERR_PTR(-ENOENT);
 	}
 
-	/**
-	 * End conditioned code.
-	 */
-
-	ret = vmw_user_surface_lookup_handle(dev_priv, tfile,
-					     mode_cmd->handle, &surface);
+	/* returns either a dmabuf or surface */
+	ret = vmw_user_lookup_handle(dev_priv, tfile,
+				     mode_cmd->handle,
+				     &surface, &bo);
 	if (ret)
-		goto try_dmabuf;
+		goto err_out;
 
-	if (!surface->scanout)
-		goto err_not_scanout;
+	/* Create the new framebuffer depending one what we got back */
+	if (bo)
+		ret = vmw_kms_new_framebuffer_dmabuf(dev_priv, bo, &vfb,
+						     mode_cmd);
+	else if (surface)
+		ret = vmw_kms_new_framebuffer_surface(dev_priv, file_priv,
+						      surface, &vfb, mode_cmd);
+	else
+		BUG();
 
-	ret = vmw_kms_new_framebuffer_surface(dev_priv, file_priv, surface,
-					      &vfb, mode_cmd);
-
-	/* vmw_user_surface_lookup takes one ref so does new_fb */
-	vmw_surface_unreference(&surface);
-
-	if (ret) {
-		DRM_ERROR("failed to create vmw_framebuffer: %i\n", ret);
-		ttm_base_object_unref(&user_obj);
-		return ERR_PTR(ret);
-	} else
-		vfb->user_obj = user_obj;
-	return &vfb->base;
-
-try_dmabuf:
-	DRM_INFO("%s: trying buffer\n", __func__);
-
-	ret = vmw_user_dmabuf_lookup(tfile, mode_cmd->handle, &bo);
-	if (ret) {
-		DRM_ERROR("failed to find buffer: %i\n", ret);
-		return ERR_PTR(-ENOENT);
-	}
-
-	ret = vmw_kms_new_framebuffer_dmabuf(dev_priv, bo, &vfb,
-					     mode_cmd);
-
-	/* vmw_user_dmabuf_lookup takes one ref so does new_fb */
-	vmw_dmabuf_unreference(&bo);
+err_out:
+	/* vmw_user_lookup_handle takes one ref so does new_fb */
+	if (bo)
+		vmw_dmabuf_unreference(&bo);
+	if (surface)
+		vmw_surface_unreference(&surface);
 
 	if (ret) {
 		DRM_ERROR("failed to create vmw_framebuffer: %i\n", ret);
@@ -1082,14 +1155,6 @@ try_dmabuf:
 		vfb->user_obj = user_obj;
 
 	return &vfb->base;
-
-err_not_scanout:
-	DRM_ERROR("surface not marked as scanout\n");
-	/* vmw_user_surface_lookup takes one ref */
-	vmw_surface_unreference(&surface);
-	ttm_base_object_unref(&user_obj);
-
-	return ERR_PTR(-EINVAL);
 }
 
 static struct drm_mode_config_funcs vmw_kms_funcs = {
@@ -1106,10 +1171,12 @@ int vmw_kms_present(struct vmw_private *dev_priv,
 		    uint32_t num_clips)
 {
 	struct vmw_display_unit *units[VMWGFX_NUM_DISPLAY_UNITS];
+	struct drm_clip_rect *tmp;
 	struct drm_crtc *crtc;
 	size_t fifo_size;
 	int i, k, num_units;
 	int ret = 0; /* silence warning */
+	int left, right, top, bottom;
 
 	struct {
 		SVGA3dCmdHeader header;
@@ -1127,60 +1194,95 @@ int vmw_kms_present(struct vmw_private *dev_priv,
 	BUG_ON(surface == NULL);
 	BUG_ON(!clips || !num_clips);
 
+	tmp = kzalloc(sizeof(*tmp) * num_clips, GFP_KERNEL);
+	if (unlikely(tmp == NULL)) {
+		DRM_ERROR("Temporary cliprect memory alloc failed.\n");
+		return -ENOMEM;
+	}
+
 	fifo_size = sizeof(*cmd) + sizeof(SVGASignedRect) * num_clips;
 	cmd = kmalloc(fifo_size, GFP_KERNEL);
 	if (unlikely(cmd == NULL)) {
 		DRM_ERROR("Failed to allocate temporary fifo memory.\n");
-		return -ENOMEM;
+		ret = -ENOMEM;
+		goto out_free_tmp;
+	}
+
+	left = clips->x;
+	right = clips->x + clips->w;
+	top = clips->y;
+	bottom = clips->y + clips->h;
+
+	for (i = 1; i < num_clips; i++) {
+		left = min_t(int, left, (int)clips[i].x);
+		right = max_t(int, right, (int)clips[i].x + clips[i].w);
+		top = min_t(int, top, (int)clips[i].y);
+		bottom = max_t(int, bottom, (int)clips[i].y + clips[i].h);
 	}
 
 	/* only need to do this once */
 	memset(cmd, 0, fifo_size);
 	cmd->header.id = cpu_to_le32(SVGA_3D_CMD_BLIT_SURFACE_TO_SCREEN);
-	cmd->header.size = cpu_to_le32(fifo_size - sizeof(cmd->header));
-
-	cmd->body.srcRect.left = 0;
-	cmd->body.srcRect.right = surface->sizes[0].width;
-	cmd->body.srcRect.top = 0;
-	cmd->body.srcRect.bottom = surface->sizes[0].height;
 
 	blits = (SVGASignedRect *)&cmd[1];
+
+	cmd->body.srcRect.left = left;
+	cmd->body.srcRect.right = right;
+	cmd->body.srcRect.top = top;
+	cmd->body.srcRect.bottom = bottom;
+
 	for (i = 0; i < num_clips; i++) {
-		blits[i].left   = clips[i].x;
-		blits[i].right  = clips[i].x + clips[i].w;
-		blits[i].top    = clips[i].y;
-		blits[i].bottom = clips[i].y + clips[i].h;
+		tmp[i].x1 = clips[i].x - left;
+		tmp[i].x2 = clips[i].x + clips[i].w - left;
+		tmp[i].y1 = clips[i].y - top;
+		tmp[i].y2 = clips[i].y + clips[i].h - top;
 	}
 
 	for (k = 0; k < num_units; k++) {
 		struct vmw_display_unit *unit = units[k];
-		int clip_x1 = destX - unit->crtc.x;
-		int clip_y1 = destY - unit->crtc.y;
-		int clip_x2 = clip_x1 + surface->sizes[0].width;
-		int clip_y2 = clip_y1 + surface->sizes[0].height;
+		struct vmw_clip_rect clip;
+		int num;
+
+		clip.x1 = left + destX - unit->crtc.x;
+		clip.y1 = top + destY - unit->crtc.y;
+		clip.x2 = right + destX - unit->crtc.x;
+		clip.y2 = bottom + destY - unit->crtc.y;
 
 		/* skip any crtcs that misses the clip region */
-		if (clip_x1 >= unit->crtc.mode.hdisplay ||
-		    clip_y1 >= unit->crtc.mode.vdisplay ||
-		    clip_x2 <= 0 || clip_y2 <= 0)
+		if (clip.x1 >= unit->crtc.mode.hdisplay ||
+		    clip.y1 >= unit->crtc.mode.vdisplay ||
+		    clip.x2 <= 0 || clip.y2 <= 0)
 			continue;
 
+		/*
+		 * In order for the clip rects to be correctly scaled
+		 * the src and dest rects needs to be the same size.
+		 */
+		cmd->body.destRect.left = clip.x1;
+		cmd->body.destRect.right = clip.x2;
+		cmd->body.destRect.top = clip.y1;
+		cmd->body.destRect.bottom = clip.y2;
+
+		/* create a clip rect of the crtc in dest coords */
+		clip.x2 = unit->crtc.mode.hdisplay - clip.x1;
+		clip.y2 = unit->crtc.mode.vdisplay - clip.y1;
+		clip.x1 = 0 - clip.x1;
+		clip.y1 = 0 - clip.y1;
+
 		/* need to reset sid as it is changed by execbuf */
 		cmd->body.srcImage.sid = sid;
-
 		cmd->body.destScreenId = unit->unit;
 
-		/*
-		 * The blit command is a lot more resilient then the
-		 * readback command when it comes to clip rects. So its
-		 * okay to go out of bounds.
-		 */
+		/* clip and write blits to cmd stream */
+		vmw_clip_cliprects(tmp, num_clips, clip, blits, &num);
 
-		cmd->body.destRect.left = clip_x1;
-		cmd->body.destRect.right = clip_x2;
-		cmd->body.destRect.top = clip_y1;
-		cmd->body.destRect.bottom = clip_y2;
+		/* if no cliprects hit skip this */
+		if (num == 0)
+			continue;
 
+		/* recalculate package length */
+		fifo_size = sizeof(*cmd) + sizeof(SVGASignedRect) * num;
+		cmd->header.size = cpu_to_le32(fifo_size - sizeof(cmd->header));
 		ret = vmw_execbuf_process(file_priv, dev_priv, NULL, cmd,
 					  fifo_size, 0, NULL);
 
@@ -1189,6 +1291,8 @@ int vmw_kms_present(struct vmw_private *dev_priv,
 	}
 
 	kfree(cmd);
+out_free_tmp:
+	kfree(tmp);
 
 	return ret;
 }

drivers/gpu/drm/vmwgfx/vmwgfx_kms.h

@@ -62,9 +62,14 @@ struct vmw_framebuffer {
 int vmw_cursor_update_image(struct vmw_private *dev_priv,
 			    u32 *image, u32 width, u32 height,
 			    u32 hotspotX, u32 hotspotY);
+int vmw_cursor_update_dmabuf(struct vmw_private *dev_priv,
+			     struct vmw_dma_buffer *dmabuf,
+			     u32 width, u32 height,
+			     u32 hotspotX, u32 hotspotY);
 void vmw_cursor_update_position(struct vmw_private *dev_priv,
 				bool show, int x, int y);
 
+
 /**
  * Base class display unit.
  *

drivers/gpu/drm/vmwgfx/vmwgfx_ldu.c

@@ -74,9 +74,10 @@ static int vmw_ldu_commit_list(struct vmw_private *dev_priv)
 {
 	struct vmw_legacy_display *lds = dev_priv->ldu_priv;
 	struct vmw_legacy_display_unit *entry;
+	struct vmw_display_unit *du = NULL;
 	struct drm_framebuffer *fb = NULL;
 	struct drm_crtc *crtc = NULL;
-	int i = 0;
+	int i = 0, ret;
 
 	/* If there is no display topology the host just assumes
 	 * that the guest will set the same layout as the host.
@@ -129,6 +130,25 @@ static int vmw_ldu_commit_list(struct vmw_private *dev_priv)
 
 	lds->last_num_active = lds->num_active;
 
+
+	/* Find the first du with a cursor. */
+	list_for_each_entry(entry, &lds->active, active) {
+		du = &entry->base;
+
+		if (!du->cursor_dmabuf)
+			continue;
+
+		ret = vmw_cursor_update_dmabuf(dev_priv,
+					       du->cursor_dmabuf,
+					       64, 64,
+					       du->hotspot_x,
+					       du->hotspot_y);
+		if (ret == 0)
+			break;
+
+		DRM_ERROR("Could not update cursor image\n");
+	}
+
 	return 0;
 }
 

drivers/gpu/drm/vmwgfx/vmwgfx_resource.c

@@ -1190,6 +1190,29 @@ void vmw_resource_unreserve(struct list_head *list)
 		write_unlock(lock);
 }
 
+/**
+ * Helper function that looks either a surface or dmabuf.
+ *
+ * The pointer this pointed at by out_surf and out_buf needs to be null.
+ */
+int vmw_user_lookup_handle(struct vmw_private *dev_priv,
+			   struct ttm_object_file *tfile,
+			   uint32_t handle,
+			   struct vmw_surface **out_surf,
+			   struct vmw_dma_buffer **out_buf)
+{
+	int ret;
+
+	BUG_ON(*out_surf || *out_buf);
+
+	ret = vmw_user_surface_lookup_handle(dev_priv, tfile, handle, out_surf);
+	if (!ret)
+		return 0;
+
+	ret = vmw_user_dmabuf_lookup(tfile, handle, out_buf);
+	return ret;
+}
+
 
 int vmw_user_surface_lookup_handle(struct vmw_private *dev_priv,
 				   struct ttm_object_file *tfile,

drivers/hwmon/jz4740-hwmon.c

@@ -59,7 +59,7 @@ static ssize_t jz4740_hwmon_read_adcin(struct device *dev,
 {
 	struct jz4740_hwmon *hwmon = dev_get_drvdata(dev);
 	struct completion *completion = &hwmon->read_completion;
-	unsigned long t;
+	long t;
 	unsigned long val;
 	int ret;
 
@@ -203,7 +203,7 @@ static int __devexit jz4740_hwmon_remove(struct platform_device *pdev)
 	return 0;
 }
 
-struct platform_driver jz4740_hwmon_driver = {
+static struct platform_driver jz4740_hwmon_driver = {
 	.probe	= jz4740_hwmon_probe,
 	.remove = __devexit_p(jz4740_hwmon_remove),
 	.driver = {

drivers/i2c/busses/i2c-eg20t.c

@@ -893,6 +893,13 @@ static int __devinit pch_i2c_probe(struct pci_dev *pdev,
 	/* Set the number of I2C channel instance */
 	adap_info->ch_num = id->driver_data;
 
+	ret = request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED,
+		  KBUILD_MODNAME, adap_info);
+	if (ret) {
+		pch_pci_err(pdev, "request_irq FAILED\n");
+		goto err_request_irq;
+	}
+
 	for (i = 0; i < adap_info->ch_num; i++) {
 		pch_adap = &adap_info->pch_data[i].pch_adapter;
 		adap_info->pch_i2c_suspended = false;
@@ -910,28 +917,23 @@ static int __devinit pch_i2c_probe(struct pci_dev *pdev,
 
 		pch_adap->dev.parent = &pdev->dev;
 
+		pch_i2c_init(&adap_info->pch_data[i]);
 		ret = i2c_add_adapter(pch_adap);
 		if (ret) {
 			pch_pci_err(pdev, "i2c_add_adapter[ch:%d] FAILED\n", i);
-			goto err_i2c_add_adapter;
+			goto err_add_adapter;
 		}
-
-		pch_i2c_init(&adap_info->pch_data[i]);
-	}
-	ret = request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED,
-		  KBUILD_MODNAME, adap_info);
-	if (ret) {
-		pch_pci_err(pdev, "request_irq FAILED\n");
-		goto err_i2c_add_adapter;
 	}
 
 	pci_set_drvdata(pdev, adap_info);
 	pch_pci_dbg(pdev, "returns %d.\n", ret);
 	return 0;
 
-err_i2c_add_adapter:
+err_add_adapter:
 	for (j = 0; j < i; j++)
 		i2c_del_adapter(&adap_info->pch_data[j].pch_adapter);
+	free_irq(pdev->irq, adap_info);
+err_request_irq:
 	pci_iounmap(pdev, base_addr);
 err_pci_iomap:
 	pci_release_regions(pdev);

drivers/i2c/busses/i2c-omap.c

@@ -1047,13 +1047,14 @@ omap_i2c_probe(struct platform_device *pdev)
 		 * size. This is to ensure that we can handle the status on int
 		 * call back latencies.
 		 */
-		if (dev->rev >= OMAP_I2C_REV_ON_3530_4430) {
-			dev->fifo_size = 0;
+
+		dev->fifo_size = (dev->fifo_size / 2);
+
+		if (dev->rev >= OMAP_I2C_REV_ON_3530_4430)
 			dev->b_hw = 0; /* Disable hardware fixes */
-		} else {
-			dev->fifo_size = (dev->fifo_size / 2);
+		else
 			dev->b_hw = 1; /* Enable hardware fixes */
-		}
+
 		/* calculate wakeup latency constraint for MPU */
 		if (dev->set_mpu_wkup_lat != NULL)
 			dev->latency = (1000000 * dev->fifo_size) /

drivers/i2c/busses/i2c-s3c2410.c

@@ -534,6 +534,7 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c,
 
 	/* first, try busy waiting briefly */
 	do {
+		cpu_relax();
 		iicstat = readl(i2c->regs + S3C2410_IICSTAT);
 	} while ((iicstat & S3C2410_IICSTAT_START) && --spins);
 
@@ -786,7 +787,7 @@ static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c)
 #else
 static int s3c24xx_i2c_parse_dt_gpio(struct s3c24xx_i2c *i2c)
 {
-	return -EINVAL;
+	return 0;
 }
 
 static void s3c24xx_i2c_dt_gpio_free(struct s3c24xx_i2c *i2c)

drivers/infiniband/core/cma.c

@@ -2513,6 +2513,9 @@ static int cma_resolve_ib_udp(struct rdma_id_private *id_priv,
 
 	req.private_data_len = sizeof(struct cma_hdr) +
 			       conn_param->private_data_len;
+	if (req.private_data_len < conn_param->private_data_len)
+		return -EINVAL;
+
 	req.private_data = kzalloc(req.private_data_len, GFP_ATOMIC);
 	if (!req.private_data)
 		return -ENOMEM;
@@ -2562,6 +2565,9 @@ static int cma_connect_ib(struct rdma_id_private *id_priv,
 	memset(&req, 0, sizeof req);
 	offset = cma_user_data_offset(id_priv->id.ps);
 	req.private_data_len = offset + conn_param->private_data_len;
+	if (req.private_data_len < conn_param->private_data_len)
+		return -EINVAL;
+
 	private_data = kzalloc(req.private_data_len, GFP_ATOMIC);
 	if (!private_data)
 		return -ENOMEM;

drivers/infiniband/hw/mlx4/main.c

@@ -1244,7 +1244,8 @@ err_reg:
 
 err_counter:
 	for (; i; --i)
-		mlx4_counter_free(ibdev->dev, ibdev->counters[i - 1]);
+		if (ibdev->counters[i - 1] != -1)
+			mlx4_counter_free(ibdev->dev, ibdev->counters[i - 1]);
 
 err_map:
 	iounmap(ibdev->uar_map);
@@ -1275,7 +1276,8 @@ static void mlx4_ib_remove(struct mlx4_dev *dev, void *ibdev_ptr)
 	}
 	iounmap(ibdev->uar_map);
 	for (p = 0; p < ibdev->num_ports; ++p)
-		mlx4_counter_free(ibdev->dev, ibdev->counters[p]);
+		if (ibdev->counters[p] != -1)
+			mlx4_counter_free(ibdev->dev, ibdev->counters[p]);
 	mlx4_foreach_port(p, dev, MLX4_PORT_TYPE_IB)
 		mlx4_CLOSE_PORT(dev, p);
 

drivers/infiniband/hw/qib/qib_file_ops.c

@@ -1285,7 +1285,7 @@ static int setup_ctxt(struct qib_pportdata *ppd, int ctxt,
 	strlcpy(rcd->comm, current->comm, sizeof(rcd->comm));
 	ctxt_fp(fp) = rcd;
 	qib_stats.sps_ctxts++;
-	dd->freectxts++;
+	dd->freectxts--;
 	ret = 0;
 	goto bail;
 
@@ -1794,7 +1794,7 @@ static int qib_close(struct inode *in, struct file *fp)
 		if (dd->pageshadow)
 			unlock_expected_tids(rcd);
 		qib_stats.sps_ctxts--;
-		dd->freectxts--;
+		dd->freectxts++;
 	}
 
 	mutex_unlock(&qib_mutex);

drivers/input/misc/cma3000_d0x.c

@@ -115,8 +115,8 @@ static void decode_mg(struct cma3000_accl_data *data, int *datax,
 static irqreturn_t cma3000_thread_irq(int irq, void *dev_id)
 {
 	struct cma3000_accl_data *data = dev_id;
-	int datax, datay, dataz;
-	u8 ctrl, mode, range, intr_status;
+	int datax, datay, dataz, intr_status;
+	u8 ctrl, mode, range;
 
 	intr_status = CMA3000_READ(data, CMA3000_INTSTATUS, "interrupt status");
 	if (intr_status < 0)

drivers/input/mouse/synaptics.c

@@ -24,6 +24,7 @@
  */
 
 #include <linux/module.h>
+#include <linux/delay.h>
 #include <linux/dmi.h>
 #include <linux/input/mt.h>
 #include <linux/serio.h>
@@ -1220,6 +1221,16 @@ static int synaptics_reconnect(struct psmouse *psmouse)
 
 	do {
 		psmouse_reset(psmouse);
+		if (retry) {
+			/*
+			 * On some boxes, right after resuming, the touchpad
+			 * needs some time to finish initializing (I assume
+			 * it needs time to calibrate) and start responding
+			 * to Synaptics-specific queries, so let's wait a
+			 * bit.
+			 */
+			ssleep(1);
+		}
 		error = synaptics_detect(psmouse, 0);
 	} while (error && ++retry < 3);
 

drivers/input/tablet/wacom_wac.c

@@ -1470,6 +1470,9 @@ static const struct wacom_features wacom_features_0xE3 =
 static const struct wacom_features wacom_features_0xE6 =
 	{ "Wacom ISDv4 E6",       WACOM_PKGLEN_TPC2FG,    27760, 15694,  255,
 	  0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
+static const struct wacom_features wacom_features_0xEC =
+	{ "Wacom ISDv4 EC",       WACOM_PKGLEN_GRAPHIRE,  25710, 14500,  255,
+	  0, TABLETPC,    WACOM_INTUOS_RES, WACOM_INTUOS_RES };
 static const struct wacom_features wacom_features_0x47 =
 	{ "Wacom Intuos2 6x8",    WACOM_PKGLEN_INTUOS,    20320, 16240, 1023,
 	  31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
@@ -1611,6 +1614,7 @@ const struct usb_device_id wacom_ids[] = {
 	{ USB_DEVICE_WACOM(0xE2) },
 	{ USB_DEVICE_WACOM(0xE3) },
 	{ USB_DEVICE_WACOM(0xE6) },
+	{ USB_DEVICE_WACOM(0xEC) },
 	{ USB_DEVICE_WACOM(0x47) },
 	{ USB_DEVICE_LENOVO(0x6004) },
 	{ }

drivers/iommu/intel-iommu.c

@@ -405,6 +405,9 @@ int dmar_disabled = 0;
 int dmar_disabled = 1;
 #endif /*CONFIG_INTEL_IOMMU_DEFAULT_ON*/
 
+int intel_iommu_enabled = 0;
+EXPORT_SYMBOL_GPL(intel_iommu_enabled);
+
 static int dmar_map_gfx = 1;
 static int dmar_forcedac;
 static int intel_iommu_strict;
@@ -3647,6 +3650,8 @@ int __init intel_iommu_init(void)
 
 	bus_register_notifier(&pci_bus_type, &device_nb);
 
+	intel_iommu_enabled = 1;
+
 	return 0;
 }
 

drivers/md/bitmap.c

@@ -1393,9 +1393,6 @@ void bitmap_endwrite(struct bitmap *bitmap, sector_t offset, unsigned long secto
 			 atomic_read(&bitmap->behind_writes),
 			 bitmap->mddev->bitmap_info.max_write_behind);
 	}
-	if (bitmap->mddev->degraded)
-		/* Never clear bits or update events_cleared when degraded */
-		success = 0;
 
 	while (sectors) {
 		sector_t blocks;
@@ -1409,7 +1406,7 @@ void bitmap_endwrite(struct bitmap *bitmap, sector_t offset, unsigned long secto
 			return;
 		}
 
-		if (success &&
+		if (success && !bitmap->mddev->degraded &&
 		    bitmap->events_cleared < bitmap->mddev->events) {
 			bitmap->events_cleared = bitmap->mddev->events;
 			bitmap->need_sync = 1;

drivers/md/linear.c

@@ -230,6 +230,7 @@ static int linear_add(struct mddev *mddev, struct md_rdev *rdev)
 		return -EINVAL;
 
 	rdev->raid_disk = rdev->saved_raid_disk;
+	rdev->saved_raid_disk = -1;
 
 	newconf = linear_conf(mddev,mddev->raid_disks+1);
 

drivers/md/md.c

@@ -7360,8 +7360,7 @@ static int remove_and_add_spares(struct mddev *mddev)
 					spares++;
 					md_new_event(mddev);
 					set_bit(MD_CHANGE_DEVS, &mddev->flags);
-				} else
-					break;
+				}
 			}
 		}
 	}

drivers/md/raid5.c

@@ -3065,11 +3065,17 @@ static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s)
 			}
 		} else if (test_bit(In_sync, &rdev->flags))
 			set_bit(R5_Insync, &dev->flags);
-		else {
+		else if (sh->sector + STRIPE_SECTORS <= rdev->recovery_offset)
 			/* in sync if before recovery_offset */
-			if (sh->sector + STRIPE_SECTORS <= rdev->recovery_offset)
-				set_bit(R5_Insync, &dev->flags);
-		}
+			set_bit(R5_Insync, &dev->flags);
+		else if (test_bit(R5_UPTODATE, &dev->flags) &&
+			 test_bit(R5_Expanded, &dev->flags))
+			/* If we've reshaped into here, we assume it is Insync.
+			 * We will shortly update recovery_offset to make
+			 * it official.
+			 */
+			set_bit(R5_Insync, &dev->flags);
+
 		if (rdev && test_bit(R5_WriteError, &dev->flags)) {
 			clear_bit(R5_Insync, &dev->flags);
 			if (!test_bit(Faulty, &rdev->flags)) {

drivers/media/common/tuners/mxl5007t.c

@@ -488,9 +488,10 @@ static int mxl5007t_write_regs(struct mxl5007t_state *state,
 
 static int mxl5007t_read_reg(struct mxl5007t_state *state, u8 reg, u8 *val)
 {
+	u8 buf[2] = { 0xfb, reg };
 	struct i2c_msg msg[] = {
 		{ .addr = state->i2c_props.addr, .flags = 0,
-		  .buf = &reg, .len = 1 },
+		  .buf = buf, .len = 2 },
 		{ .addr = state->i2c_props.addr, .flags = I2C_M_RD,
 		  .buf = val, .len = 1 },
 	};

drivers/media/common/tuners/tda18218.c

@@ -141,7 +141,7 @@ static int tda18218_set_params(struct dvb_frontend *fe,
 	switch (params->u.ofdm.bandwidth) {
 	case BANDWIDTH_6_MHZ:
 		LP_Fc = 0;
-		LO_Frac = params->frequency + 4000000;
+		LO_Frac = params->frequency + 3000000;
 		break;
 	case BANDWIDTH_7_MHZ:
 		LP_Fc = 1;

drivers/media/rc/ati_remote.c

@@ -189,7 +189,7 @@ struct ati_remote {
 	dma_addr_t inbuf_dma;
 	dma_addr_t outbuf_dma;
 
-	unsigned char old_data[2];  /* Detect duplicate events */
+	unsigned char old_data;     /* Detect duplicate events */
 	unsigned long old_jiffies;
 	unsigned long acc_jiffies;  /* handle acceleration */
 	unsigned long first_jiffies;
@@ -221,35 +221,35 @@ struct ati_remote {
 /* Translation table from hardware messages to input events. */
 static const struct {
 	short kind;
-	unsigned char data1, data2;
+	unsigned char data;
 	int type;
 	unsigned int code;
 	int value;
 }  ati_remote_tbl[] = {
 	/* Directional control pad axes */
-	{KIND_ACCEL,   0x35, 0x70, EV_REL, REL_X, -1},	 /* left */
-	{KIND_ACCEL,   0x36, 0x71, EV_REL, REL_X, 1},    /* right */
-	{KIND_ACCEL,   0x37, 0x72, EV_REL, REL_Y, -1},	 /* up */
-	{KIND_ACCEL,   0x38, 0x73, EV_REL, REL_Y, 1},    /* down */
+	{KIND_ACCEL,   0x70, EV_REL, REL_X, -1},   /* left */
+	{KIND_ACCEL,   0x71, EV_REL, REL_X, 1},    /* right */
+	{KIND_ACCEL,   0x72, EV_REL, REL_Y, -1},   /* up */
+	{KIND_ACCEL,   0x73, EV_REL, REL_Y, 1},    /* down */
 	/* Directional control pad diagonals */
-	{KIND_LU,      0x39, 0x74, EV_REL, 0, 0},        /* left up */
-	{KIND_RU,      0x3a, 0x75, EV_REL, 0, 0},        /* right up */
-	{KIND_LD,      0x3c, 0x77, EV_REL, 0, 0},        /* left down */
-	{KIND_RD,      0x3b, 0x76, EV_REL, 0, 0},        /* right down */
+	{KIND_LU,      0x74, EV_REL, 0, 0},        /* left up */
+	{KIND_RU,      0x75, EV_REL, 0, 0},        /* right up */
+	{KIND_LD,      0x77, EV_REL, 0, 0},        /* left down */
+	{KIND_RD,      0x76, EV_REL, 0, 0},        /* right down */
 
 	/* "Mouse button" buttons */
-	{KIND_LITERAL, 0x3d, 0x78, EV_KEY, BTN_LEFT, 1}, /* left btn down */
-	{KIND_LITERAL, 0x3e, 0x79, EV_KEY, BTN_LEFT, 0}, /* left btn up */
-	{KIND_LITERAL, 0x41, 0x7c, EV_KEY, BTN_RIGHT, 1},/* right btn down */
-	{KIND_LITERAL, 0x42, 0x7d, EV_KEY, BTN_RIGHT, 0},/* right btn up */
+	{KIND_LITERAL, 0x78, EV_KEY, BTN_LEFT, 1}, /* left btn down */
+	{KIND_LITERAL, 0x79, EV_KEY, BTN_LEFT, 0}, /* left btn up */
+	{KIND_LITERAL, 0x7c, EV_KEY, BTN_RIGHT, 1},/* right btn down */
+	{KIND_LITERAL, 0x7d, EV_KEY, BTN_RIGHT, 0},/* right btn up */
 
 	/* Artificial "doubleclick" events are generated by the hardware.
 	 * They are mapped to the "side" and "extra" mouse buttons here. */
-	{KIND_FILTERED, 0x3f, 0x7a, EV_KEY, BTN_SIDE, 1}, /* left dblclick */
-	{KIND_FILTERED, 0x43, 0x7e, EV_KEY, BTN_EXTRA, 1},/* right dblclick */
+	{KIND_FILTERED, 0x7a, EV_KEY, BTN_SIDE, 1}, /* left dblclick */
+	{KIND_FILTERED, 0x7e, EV_KEY, BTN_EXTRA, 1},/* right dblclick */
 
 	/* Non-mouse events are handled by rc-core */
-	{KIND_END, 0x00, 0x00, EV_MAX + 1, 0, 0}
+	{KIND_END, 0x00, EV_MAX + 1, 0, 0}
 };
 
 /* Local function prototypes */
@@ -396,25 +396,6 @@ static int ati_remote_sendpacket(struct ati_remote *ati_remote, u16 cmd, unsigne
 	return retval;
 }
 
-/*
- *	ati_remote_event_lookup
- */
-static int ati_remote_event_lookup(int rem, unsigned char d1, unsigned char d2)
-{
-	int i;
-
-	for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) {
-		/*
-		 * Decide if the table entry matches the remote input.
-		 */
-		if (ati_remote_tbl[i].data1 == d1 &&
-		    ati_remote_tbl[i].data2 == d2)
-			return i;
-
-	}
-	return -1;
-}
-
 /*
  *	ati_remote_compute_accel
  *
@@ -463,7 +444,15 @@ static void ati_remote_input_report(struct urb *urb)
 	int index = -1;
 	int acc;
 	int remote_num;
-	unsigned char scancode[2];
+	unsigned char scancode;
+	int i;
+
+	/*
+	 * data[0] = 0x14
+	 * data[1] = data[2] + data[3] + 0xd5 (a checksum byte)
+	 * data[2] = the key code (with toggle bit in MSB with some models)
+	 * data[3] = channel << 4 (the low 4 bits must be zero)
+	 */
 
 	/* Deal with strange looking inputs */
 	if ( (urb->actual_length != 4) || (data[0] != 0x14) ||
@@ -472,6 +461,13 @@ static void ati_remote_input_report(struct urb *urb)
 		return;
 	}
 
+	if (data[1] != ((data[2] + data[3] + 0xd5) & 0xff)) {
+		dbginfo(&ati_remote->interface->dev,
+			"wrong checksum in input: %02x %02x %02x %02x\n",
+			data[0], data[1], data[2], data[3]);
+		return;
+	}
+
 	/* Mask unwanted remote channels.  */
 	/* note: remote_num is 0-based, channel 1 on remote == 0 here */
 	remote_num = (data[3] >> 4) & 0x0f;
@@ -482,31 +478,30 @@ static void ati_remote_input_report(struct urb *urb)
 		return;
 	}
 
-	scancode[0] = (((data[1] - ((remote_num + 1) << 4)) & 0xf0) | (data[1] & 0x0f));
-
 	/*
-	 * Some devices (e.g. SnapStream Firefly) use 8080 as toggle code,
-	 * so we have to clear them. The first bit is a bit tricky as the
-	 * "non-toggled" state depends on remote_num, so we xor it with the
-	 * second bit which is only used for toggle.
+	 * MSB is a toggle code, though only used by some devices
+	 * (e.g. SnapStream Firefly)
 	 */
-	scancode[0] ^= (data[2] & 0x80);
+	scancode = data[2] & 0x7f;
 
-	scancode[1] = data[2] & ~0x80;
-
-	/* Look up event code index in mouse translation table. */
-	index = ati_remote_event_lookup(remote_num, scancode[0], scancode[1]);
+	/* Look up event code index in the mouse translation table. */
+	for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) {
+		if (scancode == ati_remote_tbl[i].data) {
+			index = i;
+			break;
+		}
+	}
 
 	if (index >= 0) {
 		dbginfo(&ati_remote->interface->dev,
-			"channel 0x%02x; mouse data %02x,%02x; index %d; keycode %d\n",
-			remote_num, data[1], data[2], index, ati_remote_tbl[index].code);
+			"channel 0x%02x; mouse data %02x; index %d; keycode %d\n",
+			remote_num, data[2], index, ati_remote_tbl[index].code);
 		if (!dev)
 			return; /* no mouse device */
 	} else
 		dbginfo(&ati_remote->interface->dev,
-			"channel 0x%02x; key data %02x,%02x, scancode %02x,%02x\n",
-			remote_num, data[1], data[2], scancode[0], scancode[1]);
+			"channel 0x%02x; key data %02x, scancode %02x\n",
+			remote_num, data[2], scancode);
 
 
 	if (index >= 0 && ati_remote_tbl[index].kind == KIND_LITERAL) {
@@ -523,8 +518,7 @@ static void ati_remote_input_report(struct urb *urb)
 		unsigned long now = jiffies;
 
 		/* Filter duplicate events which happen "too close" together. */
-		if (ati_remote->old_data[0] == data[1] &&
-		    ati_remote->old_data[1] == data[2] &&
+		if (ati_remote->old_data == data[2] &&
 		    time_before(now, ati_remote->old_jiffies +
 				     msecs_to_jiffies(repeat_filter))) {
 			ati_remote->repeat_count++;
@@ -533,8 +527,7 @@ static void ati_remote_input_report(struct urb *urb)
 			ati_remote->first_jiffies = now;
 		}
 
-		ati_remote->old_data[0] = data[1];
-		ati_remote->old_data[1] = data[2];
+		ati_remote->old_data = data[2];
 		ati_remote->old_jiffies = now;
 
 		/* Ensure we skip at least the 4 first duplicate events (generated
@@ -549,14 +542,13 @@ static void ati_remote_input_report(struct urb *urb)
 
 		if (index < 0) {
 			/* Not a mouse event, hand it to rc-core. */
-			u32 rc_code = (scancode[0] << 8) | scancode[1];
 
 			/*
 			 * We don't use the rc-core repeat handling yet as
 			 * it would cause ghost repeats which would be a
 			 * regression for this driver.
 			 */
-			rc_keydown_notimeout(ati_remote->rdev, rc_code,
+			rc_keydown_notimeout(ati_remote->rdev, scancode,
 					     data[2]);
 			rc_keyup(ati_remote->rdev);
 			return;
@@ -607,8 +599,7 @@ static void ati_remote_input_report(struct urb *urb)
 		input_sync(dev);
 
 		ati_remote->old_jiffies = jiffies;
-		ati_remote->old_data[0] = data[1];
-		ati_remote->old_data[1] = data[2];
+		ati_remote->old_data = data[2];
 	}
 }
 

drivers/media/rc/keymaps/rc-ati-x10.c

@@ -27,55 +27,55 @@
 #include <media/rc-map.h>
 
 static struct rc_map_table ati_x10[] = {
-	{ 0xd20d, KEY_1 },
-	{ 0xd30e, KEY_2 },
-	{ 0xd40f, KEY_3 },
-	{ 0xd510, KEY_4 },
-	{ 0xd611, KEY_5 },
-	{ 0xd712, KEY_6 },
-	{ 0xd813, KEY_7 },
-	{ 0xd914, KEY_8 },
-	{ 0xda15, KEY_9 },
-	{ 0xdc17, KEY_0 },
-	{ 0xc500, KEY_A },
-	{ 0xc601, KEY_B },
-	{ 0xde19, KEY_C },
-	{ 0xe01b, KEY_D },
-	{ 0xe621, KEY_E },
-	{ 0xe823, KEY_F },
+	{ 0x0d, KEY_1 },
+	{ 0x0e, KEY_2 },
+	{ 0x0f, KEY_3 },
+	{ 0x10, KEY_4 },
+	{ 0x11, KEY_5 },
+	{ 0x12, KEY_6 },
+	{ 0x13, KEY_7 },
+	{ 0x14, KEY_8 },
+	{ 0x15, KEY_9 },
+	{ 0x17, KEY_0 },
+	{ 0x00, KEY_A },
+	{ 0x01, KEY_B },
+	{ 0x19, KEY_C },
+	{ 0x1b, KEY_D },
+	{ 0x21, KEY_E },
+	{ 0x23, KEY_F },
 
-	{ 0xdd18, KEY_KPENTER },    /* "check" */
-	{ 0xdb16, KEY_MENU },       /* "menu" */
-	{ 0xc702, KEY_POWER },      /* Power */
-	{ 0xc803, KEY_TV },         /* TV */
-	{ 0xc904, KEY_DVD },        /* DVD */
-	{ 0xca05, KEY_WWW },        /* WEB */
-	{ 0xcb06, KEY_BOOKMARKS },  /* "book" */
-	{ 0xcc07, KEY_EDIT },       /* "hand" */
-	{ 0xe11c, KEY_COFFEE },     /* "timer" */
-	{ 0xe520, KEY_FRONT },      /* "max" */
-	{ 0xe21d, KEY_LEFT },       /* left */
-	{ 0xe41f, KEY_RIGHT },      /* right */
-	{ 0xe722, KEY_DOWN },       /* down */
-	{ 0xdf1a, KEY_UP },         /* up */
-	{ 0xe31e, KEY_OK },         /* "OK" */
-	{ 0xce09, KEY_VOLUMEDOWN }, /* VOL + */
-	{ 0xcd08, KEY_VOLUMEUP },   /* VOL - */
-	{ 0xcf0a, KEY_MUTE },       /* MUTE  */
-	{ 0xd00b, KEY_CHANNELUP },  /* CH + */
-	{ 0xd10c, KEY_CHANNELDOWN },/* CH - */
-	{ 0xec27, KEY_RECORD },     /* ( o) red */
-	{ 0xea25, KEY_PLAY },       /* ( >) */
-	{ 0xe924, KEY_REWIND },     /* (<<) */
-	{ 0xeb26, KEY_FORWARD },    /* (>>) */
-	{ 0xed28, KEY_STOP },       /* ([]) */
-	{ 0xee29, KEY_PAUSE },      /* ('') */
-	{ 0xf02b, KEY_PREVIOUS },   /* (<-) */
-	{ 0xef2a, KEY_NEXT },       /* (>+) */
-	{ 0xf22d, KEY_INFO },       /* PLAYING */
-	{ 0xf32e, KEY_HOME },       /* TOP */
-	{ 0xf42f, KEY_END },        /* END */
-	{ 0xf530, KEY_SELECT },     /* SELECT */
+	{ 0x18, KEY_KPENTER },    /* "check" */
+	{ 0x16, KEY_MENU },       /* "menu" */
+	{ 0x02, KEY_POWER },      /* Power */
+	{ 0x03, KEY_TV },         /* TV */
+	{ 0x04, KEY_DVD },        /* DVD */
+	{ 0x05, KEY_WWW },        /* WEB */
+	{ 0x06, KEY_BOOKMARKS },  /* "book" */
+	{ 0x07, KEY_EDIT },       /* "hand" */
+	{ 0x1c, KEY_COFFEE },     /* "timer" */
+	{ 0x20, KEY_FRONT },      /* "max" */
+	{ 0x1d, KEY_LEFT },       /* left */
+	{ 0x1f, KEY_RIGHT },      /* right */
+	{ 0x22, KEY_DOWN },       /* down */
+	{ 0x1a, KEY_UP },         /* up */
+	{ 0x1e, KEY_OK },         /* "OK" */
+	{ 0x09, KEY_VOLUMEDOWN }, /* VOL + */
+	{ 0x08, KEY_VOLUMEUP },   /* VOL - */
+	{ 0x0a, KEY_MUTE },       /* MUTE  */
+	{ 0x0b, KEY_CHANNELUP },  /* CH + */
+	{ 0x0c, KEY_CHANNELDOWN },/* CH - */
+	{ 0x27, KEY_RECORD },     /* ( o) red */
+	{ 0x25, KEY_PLAY },       /* ( >) */
+	{ 0x24, KEY_REWIND },     /* (<<) */
+	{ 0x26, KEY_FORWARD },    /* (>>) */
+	{ 0x28, KEY_STOP },       /* ([]) */
+	{ 0x29, KEY_PAUSE },      /* ('') */
+	{ 0x2b, KEY_PREVIOUS },   /* (<-) */
+	{ 0x2a, KEY_NEXT },       /* (>+) */
+	{ 0x2d, KEY_INFO },       /* PLAYING */
+	{ 0x2e, KEY_HOME },       /* TOP */
+	{ 0x2f, KEY_END },        /* END */
+	{ 0x30, KEY_SELECT },     /* SELECT */
 };
 
 static struct rc_map_list ati_x10_map = {

drivers/media/rc/keymaps/rc-medion-x10.c

@@ -25,70 +25,70 @@
 #include <media/rc-map.h>
 
 static struct rc_map_table medion_x10[] = {
-	{ 0xf12c, KEY_TV },    /* TV */
-	{ 0xf22d, KEY_VCR },   /* VCR */
-	{ 0xc904, KEY_DVD },   /* DVD */
-	{ 0xcb06, KEY_AUDIO }, /* MUSIC */
+	{ 0x2c, KEY_TV },    /* TV */
+	{ 0x2d, KEY_VCR },   /* VCR */
+	{ 0x04, KEY_DVD },   /* DVD */
+	{ 0x06, KEY_AUDIO }, /* MUSIC */
 
-	{ 0xf32e, KEY_RADIO },     /* RADIO */
-	{ 0xca05, KEY_DIRECTORY }, /* PHOTO */
-	{ 0xf42f, KEY_INFO },      /* TV-PREVIEW */
-	{ 0xf530, KEY_LIST },      /* CHANNEL-LST */
+	{ 0x2e, KEY_RADIO },     /* RADIO */
+	{ 0x05, KEY_DIRECTORY }, /* PHOTO */
+	{ 0x2f, KEY_INFO },      /* TV-PREVIEW */
+	{ 0x30, KEY_LIST },      /* CHANNEL-LST */
 
-	{ 0xe01b, KEY_SETUP }, /* SETUP */
-	{ 0xf631, KEY_VIDEO }, /* VIDEO DESKTOP */
+	{ 0x1b, KEY_SETUP }, /* SETUP */
+	{ 0x31, KEY_VIDEO }, /* VIDEO DESKTOP */
 
-	{ 0xcd08, KEY_VOLUMEDOWN },  /* VOL - */
-	{ 0xce09, KEY_VOLUMEUP },    /* VOL + */
-	{ 0xd00b, KEY_CHANNELUP },   /* CHAN + */
-	{ 0xd10c, KEY_CHANNELDOWN }, /* CHAN - */
-	{ 0xc500, KEY_MUTE },        /* MUTE */
+	{ 0x08, KEY_VOLUMEDOWN },  /* VOL - */
+	{ 0x09, KEY_VOLUMEUP },    /* VOL + */
+	{ 0x0b, KEY_CHANNELUP },   /* CHAN + */
+	{ 0x0c, KEY_CHANNELDOWN }, /* CHAN - */
+	{ 0x00, KEY_MUTE },        /* MUTE */
 
-	{ 0xf732, KEY_RED }, /* red */
-	{ 0xf833, KEY_GREEN }, /* green */
-	{ 0xf934, KEY_YELLOW }, /* yellow */
-	{ 0xfa35, KEY_BLUE }, /* blue */
-	{ 0xdb16, KEY_TEXT }, /* TXT */
+	{ 0x32, KEY_RED }, /* red */
+	{ 0x33, KEY_GREEN }, /* green */
+	{ 0x34, KEY_YELLOW }, /* yellow */
+	{ 0x35, KEY_BLUE }, /* blue */
+	{ 0x16, KEY_TEXT }, /* TXT */
 
-	{ 0xd20d, KEY_1 },
-	{ 0xd30e, KEY_2 },
-	{ 0xd40f, KEY_3 },
-	{ 0xd510, KEY_4 },
-	{ 0xd611, KEY_5 },
-	{ 0xd712, KEY_6 },
-	{ 0xd813, KEY_7 },
-	{ 0xd914, KEY_8 },
-	{ 0xda15, KEY_9 },
-	{ 0xdc17, KEY_0 },
-	{ 0xe11c, KEY_SEARCH }, /* TV/RAD, CH SRC */
-	{ 0xe520, KEY_DELETE }, /* DELETE */
+	{ 0x0d, KEY_1 },
+	{ 0x0e, KEY_2 },
+	{ 0x0f, KEY_3 },
+	{ 0x10, KEY_4 },
+	{ 0x11, KEY_5 },
+	{ 0x12, KEY_6 },
+	{ 0x13, KEY_7 },
+	{ 0x14, KEY_8 },
+	{ 0x15, KEY_9 },
+	{ 0x17, KEY_0 },
+	{ 0x1c, KEY_SEARCH }, /* TV/RAD, CH SRC */
+	{ 0x20, KEY_DELETE }, /* DELETE */
 
-	{ 0xfb36, KEY_KEYBOARD }, /* RENAME */
-	{ 0xdd18, KEY_SCREEN },   /* SNAPSHOT */
+	{ 0x36, KEY_KEYBOARD }, /* RENAME */
+	{ 0x18, KEY_SCREEN },   /* SNAPSHOT */
 
-	{ 0xdf1a, KEY_UP },    /* up */
-	{ 0xe722, KEY_DOWN },  /* down */
-	{ 0xe21d, KEY_LEFT },  /* left */
-	{ 0xe41f, KEY_RIGHT }, /* right */
-	{ 0xe31e, KEY_OK },    /* OK */
+	{ 0x1a, KEY_UP },    /* up */
+	{ 0x22, KEY_DOWN },  /* down */
+	{ 0x1d, KEY_LEFT },  /* left */
+	{ 0x1f, KEY_RIGHT }, /* right */
+	{ 0x1e, KEY_OK },    /* OK */
 
-	{ 0xfc37, KEY_SELECT }, /* ACQUIRE IMAGE */
-	{ 0xfd38, KEY_EDIT },   /* EDIT IMAGE */
+	{ 0x37, KEY_SELECT }, /* ACQUIRE IMAGE */
+	{ 0x38, KEY_EDIT },   /* EDIT IMAGE */
 
-	{ 0xe924, KEY_REWIND },   /* rewind  (<<) */
-	{ 0xea25, KEY_PLAY },     /* play    ( >) */
-	{ 0xeb26, KEY_FORWARD },  /* forward (>>) */
-	{ 0xec27, KEY_RECORD },   /* record  ( o) */
-	{ 0xed28, KEY_STOP },     /* stop    ([]) */
-	{ 0xee29, KEY_PAUSE },    /* pause   ('') */
+	{ 0x24, KEY_REWIND },   /* rewind  (<<) */
+	{ 0x25, KEY_PLAY },     /* play    ( >) */
+	{ 0x26, KEY_FORWARD },  /* forward (>>) */
+	{ 0x27, KEY_RECORD },   /* record  ( o) */
+	{ 0x28, KEY_STOP },     /* stop    ([]) */
+	{ 0x29, KEY_PAUSE },    /* pause   ('') */
 
-	{ 0xe621, KEY_PREVIOUS },        /* prev */
-	{ 0xfe39, KEY_SWITCHVIDEOMODE }, /* F SCR */
-	{ 0xe823, KEY_NEXT },            /* next */
-	{ 0xde19, KEY_MENU },            /* MENU */
-	{ 0xff3a, KEY_LANGUAGE },        /* AUDIO */
+	{ 0x21, KEY_PREVIOUS },        /* prev */
+	{ 0x39, KEY_SWITCHVIDEOMODE }, /* F SCR */
+	{ 0x23, KEY_NEXT },            /* next */
+	{ 0x19, KEY_MENU },            /* MENU */
+	{ 0x3a, KEY_LANGUAGE },        /* AUDIO */
 
-	{ 0xc702, KEY_POWER }, /* POWER */
+	{ 0x02, KEY_POWER }, /* POWER */
 };
 
 static struct rc_map_list medion_x10_map = {

drivers/media/rc/keymaps/rc-snapstream-firefly.c

@@ -22,63 +22,63 @@
 #include <media/rc-map.h>
 
 static struct rc_map_table snapstream_firefly[] = {
-	{ 0xf12c, KEY_ZOOM },       /* Maximize */
-	{ 0xc702, KEY_CLOSE },
+	{ 0x2c, KEY_ZOOM },       /* Maximize */
+	{ 0x02, KEY_CLOSE },
 
-	{ 0xd20d, KEY_1 },
-	{ 0xd30e, KEY_2 },
-	{ 0xd40f, KEY_3 },
-	{ 0xd510, KEY_4 },
-	{ 0xd611, KEY_5 },
-	{ 0xd712, KEY_6 },
-	{ 0xd813, KEY_7 },
-	{ 0xd914, KEY_8 },
-	{ 0xda15, KEY_9 },
-	{ 0xdc17, KEY_0 },
-	{ 0xdb16, KEY_BACK },
-	{ 0xdd18, KEY_KPENTER },    /* ent */
+	{ 0x0d, KEY_1 },
+	{ 0x0e, KEY_2 },
+	{ 0x0f, KEY_3 },
+	{ 0x10, KEY_4 },
+	{ 0x11, KEY_5 },
+	{ 0x12, KEY_6 },
+	{ 0x13, KEY_7 },
+	{ 0x14, KEY_8 },
+	{ 0x15, KEY_9 },
+	{ 0x17, KEY_0 },
+	{ 0x16, KEY_BACK },
+	{ 0x18, KEY_KPENTER },    /* ent */
 
-	{ 0xce09, KEY_VOLUMEUP },
-	{ 0xcd08, KEY_VOLUMEDOWN },
-	{ 0xcf0a, KEY_MUTE },
-	{ 0xd00b, KEY_CHANNELUP },
-	{ 0xd10c, KEY_CHANNELDOWN },
-	{ 0xc500, KEY_VENDOR },     /* firefly */
+	{ 0x09, KEY_VOLUMEUP },
+	{ 0x08, KEY_VOLUMEDOWN },
+	{ 0x0a, KEY_MUTE },
+	{ 0x0b, KEY_CHANNELUP },
+	{ 0x0c, KEY_CHANNELDOWN },
+	{ 0x00, KEY_VENDOR },     /* firefly */
 
-	{ 0xf32e, KEY_INFO },
-	{ 0xf42f, KEY_OPTION },
+	{ 0x2e, KEY_INFO },
+	{ 0x2f, KEY_OPTION },
 
-	{ 0xe21d, KEY_LEFT },
-	{ 0xe41f, KEY_RIGHT },
-	{ 0xe722, KEY_DOWN },
-	{ 0xdf1a, KEY_UP },
-	{ 0xe31e, KEY_OK },
+	{ 0x1d, KEY_LEFT },
+	{ 0x1f, KEY_RIGHT },
+	{ 0x22, KEY_DOWN },
+	{ 0x1a, KEY_UP },
+	{ 0x1e, KEY_OK },
 
-	{ 0xe11c, KEY_MENU },
-	{ 0xe520, KEY_EXIT },
+	{ 0x1c, KEY_MENU },
+	{ 0x20, KEY_EXIT },
 
-	{ 0xec27, KEY_RECORD },
-	{ 0xea25, KEY_PLAY },
-	{ 0xed28, KEY_STOP },
-	{ 0xe924, KEY_REWIND },
-	{ 0xeb26, KEY_FORWARD },
-	{ 0xee29, KEY_PAUSE },
-	{ 0xf02b, KEY_PREVIOUS },
-	{ 0xef2a, KEY_NEXT },
+	{ 0x27, KEY_RECORD },
+	{ 0x25, KEY_PLAY },
+	{ 0x28, KEY_STOP },
+	{ 0x24, KEY_REWIND },
+	{ 0x26, KEY_FORWARD },
+	{ 0x29, KEY_PAUSE },
+	{ 0x2b, KEY_PREVIOUS },
+	{ 0x2a, KEY_NEXT },
 
-	{ 0xcb06, KEY_AUDIO },      /* Music */
-	{ 0xca05, KEY_IMAGES },     /* Photos */
-	{ 0xc904, KEY_DVD },
-	{ 0xc803, KEY_TV },
-	{ 0xcc07, KEY_VIDEO },
+	{ 0x06, KEY_AUDIO },      /* Music */
+	{ 0x05, KEY_IMAGES },     /* Photos */
+	{ 0x04, KEY_DVD },
+	{ 0x03, KEY_TV },
+	{ 0x07, KEY_VIDEO },
 
-	{ 0xc601, KEY_HELP },
-	{ 0xf22d, KEY_MODE },       /* Mouse */
+	{ 0x01, KEY_HELP },
+	{ 0x2d, KEY_MODE },       /* Mouse */
 
-	{ 0xde19, KEY_A },
-	{ 0xe01b, KEY_B },
-	{ 0xe621, KEY_C },
-	{ 0xe823, KEY_D },
+	{ 0x19, KEY_A },
+	{ 0x1b, KEY_B },
+	{ 0x21, KEY_C },
+	{ 0x23, KEY_D },
 };
 
 static struct rc_map_list snapstream_firefly_map = {

drivers/media/video/au0828/au0828-cards.c

@@ -162,11 +162,14 @@ static void hauppauge_eeprom(struct au0828_dev *dev, u8 *eeprom_data)
 	switch (tv.model) {
 	case 72000: /* WinTV-HVR950q (Retail, IR, ATSC/QAM */
 	case 72001: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */
+	case 72101: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */
+	case 72201: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
 	case 72211: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
 	case 72221: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
 	case 72231: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
 	case 72241: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and analog video */
 	case 72251: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and analog video */
+	case 72261: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and analog video */
 	case 72301: /* WinTV-HVR850 (Retail, IR, ATSC and analog video */
 	case 72500: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM */
 		break;
@@ -324,6 +327,10 @@ struct usb_device_id au0828_usb_id_table[] = {
 		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL },
 	{ USB_DEVICE(0x2040, 0x8200),
 		.driver_info = AU0828_BOARD_HAUPPAUGE_WOODBURY },
+	{ USB_DEVICE(0x2040, 0x7260),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
+	{ USB_DEVICE(0x2040, 0x7213),
+		.driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q },
 	{ },
 };
 

drivers/media/video/m5mols/m5mols.h

@@ -162,7 +162,6 @@ struct m5mols_version {
  * @pad: media pad
  * @ffmt: current fmt according to resolution type
  * @res_type: current resolution type
- * @code: current code
  * @irq_waitq: waitqueue for the capture
  * @work_irq: workqueue for the IRQ
  * @flags: state variable for the interrupt handler
@@ -192,7 +191,6 @@ struct m5mols_info {
 	struct media_pad pad;
 	struct v4l2_mbus_framefmt ffmt[M5MOLS_RESTYPE_MAX];
 	int res_type;
-	enum v4l2_mbus_pixelcode code;
 	wait_queue_head_t irq_waitq;
 	struct work_struct work_irq;
 	unsigned long flags;

drivers/media/video/m5mols/m5mols_core.c

@@ -334,7 +334,7 @@ int m5mols_mode(struct m5mols_info *info, u8 mode)
 	int ret = -EINVAL;
 	u8 reg;
 
-	if (mode < REG_PARAMETER && mode > REG_CAPTURE)
+	if (mode < REG_PARAMETER || mode > REG_CAPTURE)
 		return ret;
 
 	ret = m5mols_read_u8(sd, SYSTEM_SYSMODE, &reg);
@@ -511,9 +511,6 @@ static int m5mols_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
 	struct m5mols_info *info = to_m5mols(sd);
 	struct v4l2_mbus_framefmt *format;
 
-	if (fmt->pad != 0)
-		return -EINVAL;
-
 	format = __find_format(info, fh, fmt->which, info->res_type);
 	if (!format)
 		return -EINVAL;
@@ -532,9 +529,6 @@ static int m5mols_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
 	u32 resolution = 0;
 	int ret;
 
-	if (fmt->pad != 0)
-		return -EINVAL;
-
 	ret = __find_resolution(sd, format, &type, &resolution);
 	if (ret < 0)
 		return ret;
@@ -543,13 +537,14 @@ static int m5mols_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh,
 	if (!sfmt)
 		return 0;
 
-	*sfmt		= m5mols_default_ffmt[type];
-	sfmt->width	= format->width;
-	sfmt->height	= format->height;
+
+	format->code = m5mols_default_ffmt[type].code;
+	format->colorspace = V4L2_COLORSPACE_JPEG;
+	format->field = V4L2_FIELD_NONE;
 
 	if (fmt->which == V4L2_SUBDEV_FORMAT_ACTIVE) {
+		*sfmt = *format;
 		info->resolution = resolution;
-		info->code = format->code;
 		info->res_type = type;
 	}
 
@@ -626,13 +621,14 @@ static int m5mols_start_monitor(struct m5mols_info *info)
 static int m5mols_s_stream(struct v4l2_subdev *sd, int enable)
 {
 	struct m5mols_info *info = to_m5mols(sd);
+	u32 code = info->ffmt[info->res_type].code;
 
 	if (enable) {
 		int ret = -EINVAL;
 
-		if (is_code(info->code, M5MOLS_RESTYPE_MONITOR))
+		if (is_code(code, M5MOLS_RESTYPE_MONITOR))
 			ret = m5mols_start_monitor(info);
-		if (is_code(info->code, M5MOLS_RESTYPE_CAPTURE))
+		if (is_code(code, M5MOLS_RESTYPE_CAPTURE))
 			ret = m5mols_start_capture(info);
 
 		return ret;