This is kind of last-minute, but Al Viro reported that the new
FOP_DONTCACHE flag causes memory corruption due to use-after-free
issues.
This was triggered by commit 974c5e6139 ("xfs: flag as supporting
FOP_DONTCACHE"), but that is not the underlying bug - it is just the
first user of the flag.
Vlastimil Babka suspects the underlying problem stems from the
folio_end_writeback() logic introduced in commit fb7d3bc414
("mm/filemap: drop streaming/uncached pages when writeback completes").
The most straightforward fix would be to just revert the commit that
exposed this, but Matthew Wilcox points out that other filesystems are
also starting to enable the FOP_DONTCACHE logic, so this instead
disables that bit globally for now.
The fix will hopefully end up being trivial and we can just re-enable
this logic after more testing, but until such a time we'll have to
disable the new FOP_DONTCACHE flag.
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/all/20250525083209.GS2023217@ZenIV/
Triggered-by: 974c5e6139 ("xfs: flag as supporting FOP_DONTCACHE")
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull hotfixes from Andrew Morton:
"22 hotfixes.
13 are cc:stable and the remainder address post-6.14 issues or aren't
considered necessary for -stable kernels. 19 are for MM"
* tag 'mm-hotfixes-stable-2025-05-25-00-58' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
mailmap: add Jarkko's employer email address
mm: fix copy_vma() error handling for hugetlb mappings
memcg: always call cond_resched() after fn()
mm/hugetlb: fix kernel NULL pointer dereference when replacing free hugetlb folios
mm: vmalloc: only zero-init on vrealloc shrink
mm: vmalloc: actually use the in-place vrealloc region
alloc_tag: allocate percpu counters for module tags dynamically
module: release codetag section when module load fails
mm/cma: make detection of highmem_start more robust
MAINTAINERS: add mm memory policy section
MAINTAINERS: add mm ksm section
kasan: avoid sleepable page allocation from atomic context
highmem: add folio_test_partial_kmap()
MAINTAINERS: add hung-task detector section
taskstats: fix struct taskstats breaks backward compatibility since version 15
mm/truncate: fix out-of-bounds when doing a right-aligned split
MAINTAINERS: add mm reclaim section
MAINTAINERS: update page allocator section
mm: fix VM_UFFD_MINOR == VM_SHADOW_STACK on USERFAULTFD=y && ARM64_GCS=y
mm: mmap: map MAP_STACK to VM_NOHUGEPAGE only if THP is enabled
...
If, during a mremap() operation for a hugetlb-backed memory mapping,
copy_vma() fails after the source vma has been duplicated and opened (ie.
vma_link() fails), the error is handled by closing the new vma. This
updates the hugetlbfs reservation counter of the reservation map which at
this point is referenced by both the source vma and the new copy. As a
result, once the new vma has been freed and copy_vma() returns, the
reservation counter for the source vma will be incorrect.
This patch addresses this corner case by clearing the hugetlb private page
reservation reference for the new vma and decrementing the reference
before closing the vma, so that vma_close() won't update the reservation
counter. This is also what copy_vma_and_data() does with the source vma
if copy_vma() succeeds, so a helper function has been added to do the
fixup in both functions.
The issue was reported by a private syzbot instance and can be reproduced
using the C reproducer in [1]. It's also a possible duplicate of public
syzbot report [2]. The WARNING report is:
============================================================
page_counter underflow: -1024 nr_pages=1024
WARNING: CPU: 0 PID: 3287 at mm/page_counter.c:61 page_counter_cancel+0xf6/0x120
Modules linked in:
CPU: 0 UID: 0 PID: 3287 Comm: repro__WARNING_ Not tainted 6.15.0-rc7+ #54 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-2-gc13ff2cd-prebuilt.qemu.org 04/01/2014
RIP: 0010:page_counter_cancel+0xf6/0x120
Code: ff 5b 41 5e 41 5f 5d c3 cc cc cc cc e8 f3 4f 8f ff c6 05 64 01 27 06 01 48 c7 c7 60 15 f8 85 48 89 de 4c 89 fa e8 2a a7 51 ff <0f> 0b e9 66 ff ff ff 44 89 f9 80 e1 07 38 c1 7c 9d 4c 81
RSP: 0018:ffffc900025df6a0 EFLAGS: 00010246
RAX: 2edfc409ebb44e00 RBX: fffffffffffffc00 RCX: ffff8880155f0000
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: dffffc0000000000 R08: ffffffff81c4a23c R09: 1ffff1100330482a
R10: dffffc0000000000 R11: ffffed100330482b R12: 0000000000000000
R13: ffff888058a882c0 R14: ffff888058a882c0 R15: 0000000000000400
FS: 0000000000000000(0000) GS:ffff88808fc53000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00000000004b33e0 CR3: 00000000076d6000 CR4: 00000000000006f0
Call Trace:
<TASK>
page_counter_uncharge+0x33/0x80
hugetlb_cgroup_uncharge_counter+0xcb/0x120
hugetlb_vm_op_close+0x579/0x960
? __pfx_hugetlb_vm_op_close+0x10/0x10
remove_vma+0x88/0x130
exit_mmap+0x71e/0xe00
? __pfx_exit_mmap+0x10/0x10
? __mutex_unlock_slowpath+0x22e/0x7f0
? __pfx_exit_aio+0x10/0x10
? __up_read+0x256/0x690
? uprobe_clear_state+0x274/0x290
? mm_update_next_owner+0xa9/0x810
__mmput+0xc9/0x370
exit_mm+0x203/0x2f0
? __pfx_exit_mm+0x10/0x10
? taskstats_exit+0x32b/0xa60
do_exit+0x921/0x2740
? do_raw_spin_lock+0x155/0x3b0
? __pfx_do_exit+0x10/0x10
? __pfx_do_raw_spin_lock+0x10/0x10
? _raw_spin_lock_irq+0xc5/0x100
do_group_exit+0x20c/0x2c0
get_signal+0x168c/0x1720
? __pfx_get_signal+0x10/0x10
? schedule+0x165/0x360
arch_do_signal_or_restart+0x8e/0x7d0
? __pfx_arch_do_signal_or_restart+0x10/0x10
? __pfx___se_sys_futex+0x10/0x10
syscall_exit_to_user_mode+0xb8/0x2c0
do_syscall_64+0x75/0x120
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x422dcd
Code: Unable to access opcode bytes at 0x422da3.
RSP: 002b:00007ff266cdb208 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: 0000000000000001 RBX: 00007ff266cdbcdc RCX: 0000000000422dcd
RDX: 00000000000f4240 RSI: 0000000000000081 RDI: 00000000004c7bec
RBP: 00007ff266cdb220 R08: 203a6362696c6720 R09: 203a6362696c6720
R10: 0000200000c00000 R11: 0000000000000246 R12: ffffffffffffffd0
R13: 0000000000000002 R14: 00007ffe1cb5f520 R15: 00007ff266cbb000
</TASK>
============================================================
Link: https://lkml.kernel.org/r/20250523-warning_in_page_counter_cancel-v2-1-b6df1a8cfefd@igalia.com
Link: https://people.igalia.com/rcn/kernel_logs/20250422__WARNING_in_page_counter_cancel__repro.c [1]
Link: https://lore.kernel.org/all/67000a50.050a0220.49194.048d.GAE@google.com/ [2]
Signed-off-by: Ricardo Cañuelo Navarro <rcn@igalia.com>
Suggested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Florent Revest <revest@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
I am seeing soft lockup on certain machine types when a cgroup OOMs. This
is happening because killing the process in certain machine might be very
slow, which causes the soft lockup and RCU stalls. This happens usually
when the cgroup has MANY processes and memory.oom.group is set.
Example I am seeing in real production:
[462012.244552] Memory cgroup out of memory: Killed process 3370438 (crosvm) ....
....
[462037.318059] Memory cgroup out of memory: Killed process 4171372 (adb) ....
[462037.348314] watchdog: BUG: soft lockup - CPU#64 stuck for 26s! [stat_manager-ag:1618982]
....
Quick look at why this is so slow, it seems to be related to serial flush
for certain machine types. For all the crashes I saw, the target CPU was
at console_flush_all().
In the case above, there are thousands of processes in the cgroup, and it
is soft locking up before it reaches the 1024 limit in the code (which
would call the cond_resched()). So, cond_resched() in 1024 blocks is not
sufficient.
Remove the counter-based conditional rescheduling logic and call
cond_resched() unconditionally after each task iteration, after fn() is
called. This avoids the lockup independently of how slow fn() is.
Link: https://lkml.kernel.org/r/20250523-memcg_fix-v1-1-ad3eafb60477@debian.org
Fixes: ade81479c7 ("memcg: fix soft lockup in the OOM process")
Signed-off-by: Breno Leitao <leitao@debian.org>
Suggested-by: Rik van Riel <riel@surriel.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Michael van der Westhuizen <rmikey@meta.com>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Chen Ridong <chenridong@huawei.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When a module gets unloaded it checks whether any of its tags are still in
use and if so, we keep the memory containing module's allocation tags
alive until all tags are unused. However percpu counters referenced by
the tags are freed by free_module(). This will lead to UAF if the memory
allocated by a module is accessed after module was unloaded.
To fix this we allocate percpu counters for module allocation tags
dynamically and we keep it alive for tags which are still in use after
module unloading. This also removes the requirement of a larger
PERCPU_MODULE_RESERVE when memory allocation profiling is enabled because
percpu memory for counters does not need to be reserved anymore.
Link: https://lkml.kernel.org/r/20250517000739.5930-1-surenb@google.com
Fixes: 0db6f8d782 ("alloc_tag: load module tags into separate contiguous memory")
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reported-by: David Wang <00107082@163.com>
Closes: https://lore.kernel.org/all/20250516131246.6244-1-00107082@163.com/
Tested-by: David Wang <00107082@163.com>
Cc: Christoph Lameter (Ampere) <cl@gentwo.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pratyush Yadav reports the following crash:
------------[ cut here ]------------
kernel BUG at arch/x86/mm/physaddr.c:23!
ception 0x06 IP 10:ffffffff812ebbf8 error 0 cr2 0xffff88903ffff000
CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 6.15.0-rc6+ #231 PREEMPT(undef)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
RIP: 0010:__phys_addr+0x58/0x60
Code: 01 48 89 c2 48 d3 ea 48 85 d2 75 05 e9 91 52 cf 00 0f 0b 48 3d ff ff ff 1f 77 0f 48 8b 05 20 54 55 01 48 01 d0 e9 78 52 cf 00 <0f> 0b 90 0f 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90
RSP: 0000:ffffffff82803dd8 EFLAGS: 00010006 ORIG_RAX: 0000000000000000
RAX: 000000007fffffff RBX: 00000000ffffffff RCX: 0000000000000000
RDX: 000000007fffffff RSI: 0000000280000000 RDI: ffffffffffffffff
RBP: ffffffff82803e68 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff83153180 R11: ffffffff82803e48 R12: ffffffff83c9aed0
R13: 0000000000000000 R14: 0000001040000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:0000000000000000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff88903ffff000 CR3: 0000000002838000 CR4: 00000000000000b0
Call Trace:
<TASK>
? __cma_declare_contiguous_nid+0x6e/0x340
? cma_declare_contiguous_nid+0x33/0x70
? dma_contiguous_reserve_area+0x2f/0x70
? setup_arch+0x6f1/0x870
? start_kernel+0x52/0x4b0
? x86_64_start_reservations+0x29/0x30
? x86_64_start_kernel+0x7c/0x80
? common_startup_64+0x13e/0x141
The reason is that __cma_declare_contiguous_nid() does:
highmem_start = __pa(high_memory - 1) + 1;
If dma_contiguous_reserve_area() (or any other CMA declaration) is
called before free_area_init(), high_memory is uninitialized. Without
CONFIG_DEBUG_VIRTUAL, it will likely work but use the wrong value for
highmem_start.
The issue occurs because commit e120d1bc12 ("arch, mm: set high_memory
in free_area_init()") moved initialization of high_memory after the call
to dma_contiguous_reserve() -> __cma_declare_contiguous_nid() on several
architectures.
In the case CONFIG_HIGHMEM is enabled, some architectures that actually
support HIGHMEM (arm, powerpc and x86) have initialization of high_memory
before a possible call to __cma_declare_contiguous_nid() and some
initialized high_memory late anyway (arc, csky, microblase, mips, sparc,
xtensa) even before the commit e120d1bc12 so they are fine with using
uninitialized value of high_memory.
And in the case CONFIG_HIGHMEM is disabled high_memory essentially becomes
the first address after memory end, so instead of relying on high_memory
to calculate highmem_start use memblock_end_of_DRAM() and eliminate the
dependency of CMA area creation on high_memory in majority of
configurations.
Link: https://lkml.kernel.org/r/20250519171805.1288393-1-rppt@kernel.org
Fixes: e120d1bc12 ("arch, mm: set high_memory in free_area_init()")
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reported-by: Pratyush Yadav <ptyadav@amazon.de>
Tested-by: Pratyush Yadav <ptyadav@amazon.de>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull input fixes from Dmitry Torokhov:
- even more Xbox controllers added to xpad driver: Turtle Beach Recon
Wired Controller, Turtle Beach Stealth Ultra, and PowerA Wired
Controller
- a fix to Synaptics RMI driver to not crash if controller reports
unsupported version of F34 (firmware flash) function
* tag 'input-for-v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi - fix crash with unsupported versions of F34
Input: xpad - add more controllers
Pull spi fixes from Mark Brown:
"A few final fixes for v6.15, some driver fixes for the Freescale DSPI
driver pulled over from their vendor code and another instance of the
fixes Greg has been sending throughout the kernel for constification
of the bus_type in driver core match() functions"
* tag 'spi-fix-v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-fsl-dspi: Reset SR flags before sending a new message
spi: spi-fsl-dspi: Halt the module after a new message transfer
spi: spi-fsl-dspi: restrict register range for regmap access
spi: use container_of_cont() for to_spi_device()
Pull iommu fix from Joerg Roedel:
- core: skip PASID validation for devices without PASID support
* tag 'iommu-fixes-v6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
iommu: Skip PASID validation for devices without PASID capability
Pull drm fixes from Dave Airlie:
"Weekly drm fixes pull, on target to be quiet, just one amdgpu, one
edid and a few minor xe fixes.
edid:
- fix HDR metadata reset
amdgpu:
- Hibernate fix
xe:
- Make sure to check all forcewakes when dumping mocs
- Fix wrong use of read64 on 32b register
- Synchronize Panther Lake PCI IDs"
* tag 'drm-fixes-2025-05-24' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/ptl: Update the PTL pci id table
drm/xe: Use xe_mmio_read32() to read mtcfg register
drm/xe/mocs: Check if all domains awake
Revert "drm/amd: Keep display off while going into S4"
drm/edid: fixed the bug that hdr metadata was not reset
Pull thermal control fix from Rafael Wysocki:
"This fixes a coding mistake in the x86_pkg_temp_thermal Intel thermal
driver that was introduced by an incorrect conflict resolution during
a merge (Zhang Rui)"
* tag 'thermal-6.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: x86_pkg_temp_thermal: Fix bogus trip temperature
Pull smb server fixes from Steve French:
- Fix for rename regression due to the recent VFS lookup changes
- Fix write failure
- locking fix for oplock handling
* tag 'v6.15-rc8-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: use list_first_entry_or_null for opinfo_get_list()
ksmbd: fix rename failure
ksmbd: fix stream write failure
Pull SoC fixes from Arnd Bergmann:
"A few last minute fixes:
- two driver fixes for samsung/google platforms, both addressing
mistakes in changes from the 6.15 merge window
- a revert for an allwinner devicetree change that caused problems
- a fix for an older regression with the LEDs on Marvell Armada 3720
- a defconfig change to enable chacha20 again after a crypto
subsystem change in 6.15 inadventently turned it off"
* tag 'soc-fixes-6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: defconfig: Ensure CRYPTO_CHACHA20_NEON is selected
arm64: dts: marvell: uDPU: define pinctrl state for alarm LEDs
Revert "arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection"
soc: samsung: usi: prevent wrong bits inversion during unconfiguring
firmware: exynos-acpm: check saved RX before bailing out on empty RX queue
Pull vfs fixes from Christian Brauner:
"This contains a small set of fixes for the blocking buffer lookup
conversion done earlier this cycle.
It adds a missing conversion in the getblk slowpath and a few minor
optimizations and cleanups"
* tag 'vfs-6.15-rc8.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs/buffer: optimize discard_buffer()
fs/buffer: remove superfluous statements
fs/buffer: avoid redundant lookup in getblk slowpath
fs/buffer: use sleeping lookup in __getblk_slowpath()
The ARL requires that the GMA and NPU devices both be in D3Hot in order
for PC10 and S0iX to be achieved in S2idle. The original ARL-H/U addition
to the intel_pmc_core driver attempted to do this by switching them to D3
in the init and resume calls of the intel_pmc_core driver.
The problem is the ARL-H/U have a different NPU device and thus are not
being properly set and thus S0iX does not work properly in ARL-H/U. This
patch creates a new ARL-H specific device id that is correct and also
adds the D3 fixup to the suspend callback. This way if the PCI devies
drop from D3 to D0 after resume they can be corrected for the next
suspend. Thus there is no dropout in S0iX.
Fixes: bd820906ea ("platform/x86/intel/pmc: Add Arrow Lake U/H support to intel_pmc_core driver")
Signed-off-by: Todd Brandt <todd.e.brandt@intel.com>
Link: https://lore.kernel.org/r/a61f78be45c13f39e122dcc684b636f4b21e79a0.1747737446.git.todd.e.brandt@intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Pull bcachefs fixes from Kent Overstreet:
"Small stuff, main ones users will be interested in:
- Couple more casefolding fixes; we can now detect and repair
casefolded dirents in non-casefolded dir and vice versa
- Fix for massive write inflation with mmapped io, which hit certain
databases"
* tag 'bcachefs-2025-05-22' of git://evilpiepirate.org/bcachefs:
bcachefs: Check for casefolded dirents in non casefolded dirs
bcachefs: Fix bch2_dirent_create_snapshot() for casefolding
bcachefs: Fix casefold opt via xattr interface
bcachefs: mkwrite() now only dirties one page
bcachefs: fix extent_has_stripe_ptr()
bcachefs: Fix bch2_btree_path_traverse_cached() when paths realloced
Pull block fixes from Jens Axboe:
- Fix for a regression with setting up loop on a file system
without ->write_iter()
- Fix for an nvme sysfs regression
* tag 'block-6.15-20250522' of git://git.kernel.dk/linux:
nvme: avoid creating multipath sysfs group under namespace path devices
loop: don't require ->write_iter for writable files in loop_configure
Pull io_uring fixes from Jens Axboe:
- Kill a duplicate function definition, which can cause linking issues
in certain .config configurations. Introduced in this cycle.
- Fix for a potential overflow CQE reordering issue if a re-schedule is
done during posting. Heading to stable.
- Fix for an issue with recv bundles, where certain conditions can lead
to gaps in the buffers, where a contiguous buffer range was expected.
Heading to stable.
* tag 'io_uring-6.15-20250522' of git://git.kernel.dk/linux:
io_uring/net: only retry recv bundle for a full transfer
io_uring: fix overflow resched cqe reordering
io_uring/cmd: axe duplicate io_uring_cmd_import_fixed_vec() declaration
Pull smb client fixes from Steve French:
- Two fixes for use after free in readdir code paths
* tag '6.15-rc8-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: Reset all search buffer pointers when releasing buffer
smb: client: Fix use-after-free in cifs_fill_dirent
Pull networking fixes from Paolo Abeni:
"This is somewhat larger than what I hoped for, with a few PRs from
subsystems and follow-ups for the recent netdev locking changes,
anyhow there are no known pending regressions.
Including fixes from bluetooth, ipsec and CAN.
Current release - regressions:
- eth: team: grab team lock during team_change_rx_flags
- eth: bnxt_en: fix netdev locking in ULP IRQ functions
Current release - new code bugs:
- xfrm: ipcomp: fix truesize computation on receive
- eth: airoha: fix page recycling in airoha_qdma_rx_process()
Previous releases - regressions:
- sched: hfsc: fix qlen accounting bug when using peek in
hfsc_enqueue()
- mr: consolidate the ipmr_can_free_table() checks.
- bridge: netfilter: fix forwarding of fragmented packets
- xsk: bring back busy polling support in XDP_COPY
- can:
- add missing rcu read protection for procfs content
- kvaser_pciefd: force IRQ edge in case of nested IRQ
Previous releases - always broken:
- xfrm: espintcp: remove encap socket caching to avoid reference leak
- bluetooth: use skb_pull to avoid unsafe access in QCA dump handling
- eth: idpf:
- fix null-ptr-deref in idpf_features_check
- fix idpf_vport_splitq_napi_poll()
- eth: hibmcge: fix wrong ndo.open() after reset fail issue"
* tag 'net-6.15-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (40 commits)
octeontx2-af: Fix APR entry mapping based on APR_LMT_CFG
octeontx2-af: Set LMT_ENA bit for APR table entries
net/tipc: fix slab-use-after-free Read in tipc_aead_encrypt_done
octeontx2-pf: Avoid adding dcbnl_ops for LBK and SDP vf
selftests/tc-testing: Add an HFSC qlen accounting test
sch_hfsc: Fix qlen accounting bug when using peek in hfsc_enqueue()
idpf: fix idpf_vport_splitq_napi_poll()
net: hibmcge: fix wrong ndo.open() after reset fail issue.
net: hibmcge: fix incorrect statistics update issue
xsk: Bring back busy polling support in XDP_COPY
can: slcan: allow reception of short error messages
net: lan743x: Restore SGMII CTRL register on resume
bnxt_en: Fix netdev locking in ULP IRQ functions
MAINTAINERS: Drop myself to reviewer for ravb driver
net: dwmac-sun8i: Use parsed internal PHY address instead of 1
net: ethernet: ti: am65-cpsw: Lower random mac address error print to info
can: kvaser_pciefd: Continue parsing DMA buf after dropped RX
can: kvaser_pciefd: Fix echo_skb race
can: kvaser_pciefd: Force IRQ edge in case of nested IRQ
idpf: fix null-ptr-deref in idpf_features_check
...
Pull pin control fixes from Linus Walleij:
"This deals with a crash in the Qualcomm pin controller GPIO
parts when using hogs.
The first patch to gpiolib makes gpiochip_line_is_valid()
NULL-tolerant.
The second patch fixes the actual problem"
* tag 'pinctrl-v6.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: qcom: switch to devm_register_sys_off_handler()
gpiolib: don't crash on enabling GPIO HOG pins
Pull sound fixes from Takashi Iwai:
"A collection of small fixes for 6.15 final. It became slightly a
higher amount than expected, but all look easy and safe to apply:
- A fix for PCM core race spotted by fuzzing
- ASoC topology fix for single DAI link
- UAF fix for ASoC SOF Intel HD-audio at reloading
- ASoC SOF Intel and Mediatek fixes
- Trivial HD-audio quirks as usual"
* tag 'sound-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Add new HP ZBook laptop with micmute led fixup
ALSA: hda/realtek: Add support for HP Agusta using CS35L41 HDA
ALSA: hda/realtek: Add quirk for Lenovo Yoga Pro 7 14ASP10
ALSA: hda/realtek - restore auto-mute mode for Dell Chrome platform
ALSA: pcm: Fix race of buffer access at PCM OSS layer
ASoC: SOF: Intel: hda: Fix UAF when reloading module
ASoc: SOF: topology: connect DAI to a single DAI link
ASoC: SOF: Intel: hda-bus: Use PIO mode on ACE2+ platforms
ASoC: SOF: ipc4-pcm: Delay reporting is only supported for playback direction
ASoC: SOF: ipc4-control: Use SOF_CTRL_CMD_BINARY as numid for bytes_ext
ASoC: mediatek: mt8188-mt6359: Depend on MT6359_ACCDET set or disabled
ASoC: mediatek: mt8188-mt6359: select CONFIG_SND_SOC_MT6359_ACCDET
Pull NVMe fix from Christoph:
"nvme fixes for Linux 6.15
- do not create the newly added multipath sysfs group for
non-multipath nodes (Nilay Shroff)"
* tag 'nvme-6.15-2025-05-22' of git://git.infradead.org/nvme:
nvme: avoid creating multipath sysfs group under namespace path devices
If, in a previous transfer, the controller sends more data than expected
by the DSPI target, SR.RFDF (RX FIFO is not empty) will remain asserted.
When flushing the FIFOs at the beginning of a new transfer (writing 1
into MCR.CLR_TXF and MCR.CLR_RXF), SR.RFDF should also be cleared.
Otherwise, when running in target mode with DMA, if SR.RFDF remains
asserted, the DMA callback will be fired before the controller sends any
data.
Take this opportunity to reset all Status Register fields.
Fixes: 5ce3cc5674 ("spi: spi-fsl-dspi: Provide support for DSPI slave mode operation (Vybryd vf610)")
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://patch.msgid.link/20250522-james-nxp-spi-v2-3-bea884630cfb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The XSPI mode implementation in this driver still uses the EOQ flag to
signal the last word in a transmission and deassert the PCS signal.
However, at speeds lower than ~200kHZ, the PCS signal seems to remain
asserted even when SR[EOQF] = 1 indicates the end of a transmission.
This is a problem for target devices which require the deassertation of
the PCS signal between transfers.
Hence, this commit 'forces' the deassertation of the PCS by stopping the
module through MCR[HALT] after completing a new transfer. According to
the reference manual, the module stops or transitions from the Running
state to the Stopped state after the current frame, when any one of the
following conditions exist:
- The value of SR[EOQF] = 1.
- The chip is in Debug mode and the value of MCR[FRZ] = 1.
- The value of MCR[HALT] = 1.
This shouldn't be done if the last transfer in the message has cs_change
set.
Fixes: ea93ed4c18 ("spi: spi-fsl-dspi: Use EOQ for last word in buffer even for XSPI mode")
Signed-off-by: Bogdan-Gabriel Roman <bogdan-gabriel.roman@nxp.com>
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://patch.msgid.link/20250522-james-nxp-spi-v2-2-bea884630cfb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
DSPI registers are NOT continuous, some registers are reserved and
accessing them from userspace will trigger external abort, add regmap
register access table to avoid below abort.
For example on S32G:
# cat /sys/kernel/debug/regmap/401d8000.spi/registers
Internal error: synchronous external abort: 96000210 1 PREEMPT SMP
...
Call trace:
regmap_mmio_read32le+0x24/0x48
regmap_mmio_read+0x48/0x70
_regmap_bus_reg_read+0x38/0x48
_regmap_read+0x68/0x1b0
regmap_read+0x50/0x78
regmap_read_debugfs+0x120/0x338
Fixes: 1acbdeb92c ("spi/fsl-dspi: Convert to use regmap and add big-endian support")
Co-developed-by: Xulin Sun <xulin.sun@windriver.com>
Signed-off-by: Xulin Sun <xulin.sun@windriver.com>
Signed-off-by: Larisa Grigore <larisa.grigore@nxp.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://patch.msgid.link/20250522-james-nxp-spi-v2-1-bea884630cfb@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Some places in the spi core pass in a const pointer to a device and the
default container_of() casts that away, which is not a good idea.
Preserve the proper const attribute by using container_of_const() for
to_spi_device() instead, which is what it was designed for.
Note, this removes the NULL check for a device pointer in the call, but
no one was ever checking for that return value, and a device pointer
should never be NULL overall anyway, so this should be a safe change.
Cc: Mark Brown <broonie@kernel.org>
Fixes: d69d804845 ("driver core: have match() callback in struct bus_type take a const *")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2025052230-fidgeting-stooge-66f5@gregkh
Signed-off-by: Mark Brown <broonie@kernel.org>
Marc Kleine-Budde says:
====================
pull-request: can 2025-05-22
this is a pull request of 4 patches for net/main.
The first 3 patches are by Axel Forsman and fix a ISR race condition
in the kvaser_pciefd driver.
The last patch is by Carlos Sanchez and fixes the reception of short
error messages in the slcan driver.
* tag 'linux-can-fixes-for-6.15-20250521' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: slcan: allow reception of short error messages
can: kvaser_pciefd: Continue parsing DMA buf after dropped RX
can: kvaser_pciefd: Fix echo_skb race
can: kvaser_pciefd: Force IRQ edge in case of nested IRQ
====================
Link: https://patch.msgid.link/20250522082344.490913-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Geetha sowjanya says:
====================
octeontx2-af: APR Mapping Fixes
This patch series includes fixes related to APR (LMT)
mapping and debugfs support.
Changes include:
Patch 1:Set LMT_ENA bit for APR table entries.
Enables the LMT line for each PF/VF by setting
the LMT_ENA bit in the APR_LMT_MAP_ENTRY_S
structure.
Patch-2:Fix APR entry in debugfs
The APR table was previously mapped using a fixed size,
which could lead to incorrect mappings when the number
of PFs and VFs differed from the assumed value.
This patch updates the logic to calculate the APR table
size dynamically, based on values from the APR_LMT_CFG
register, ensuring correct representation in debugfs.
====================
Link: https://patch.msgid.link/20250521060834.19780-1-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current implementation maps the APR table using a fixed size,
which can lead to incorrect mapping when the number of PFs and VFs
varies.
This patch corrects the mapping by calculating the APR table
size dynamically based on the values configured in the
APR_LMT_CFG register, ensuring accurate representation
of APR entries in debugfs.
Fixes: 0daa55d033 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table").
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Link: https://patch.msgid.link/20250521060834.19780-3-gakula@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Steffen Klassert says:
====================
pull request (net): ipsec 2025-05-21
1) Fix some missing kfree_skb in the error paths of espintcp.
From Sabrina Dubroca.
2) Fix a reference leak in espintcp.
From Sabrina Dubroca.
3) Fix UDP GRO handling for ESPINUDP.
From Tobias Brunner.
4) Fix ipcomp truesize computation on the receive path.
From Sabrina Dubroca.
5) Sanitize marks before policy/state insertation.
From Paul Chaignon.
* tag 'ipsec-2025-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Sanitize marks before insert
xfrm: ipcomp: fix truesize computation on receive
xfrm: Fix UDP GRO handling for some corner cases
espintcp: remove encap socket caching to avoid reference leak
espintcp: fix skb leaks
====================
Link: https://patch.msgid.link/20250521054348.4057269-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Syzbot reported a slab-use-after-free with the following call trace:
==================================================================
BUG: KASAN: slab-use-after-free in tipc_aead_encrypt_done+0x4bd/0x510 net/tipc/crypto.c:840
Read of size 8 at addr ffff88807a733000 by task kworker/1:0/25
Call Trace:
kasan_report+0xd9/0x110 mm/kasan/report.c:601
tipc_aead_encrypt_done+0x4bd/0x510 net/tipc/crypto.c:840
crypto_request_complete include/crypto/algapi.h:266
aead_request_complete include/crypto/internal/aead.h:85
cryptd_aead_crypt+0x3b8/0x750 crypto/cryptd.c:772
crypto_request_complete include/crypto/algapi.h:266
cryptd_queue_worker+0x131/0x200 crypto/cryptd.c:181
process_one_work+0x9fb/0x1b60 kernel/workqueue.c:3231
Allocated by task 8355:
kzalloc_noprof include/linux/slab.h:778
tipc_crypto_start+0xcc/0x9e0 net/tipc/crypto.c:1466
tipc_init_net+0x2dd/0x430 net/tipc/core.c:72
ops_init+0xb9/0x650 net/core/net_namespace.c:139
setup_net+0x435/0xb40 net/core/net_namespace.c:343
copy_net_ns+0x2f0/0x670 net/core/net_namespace.c:508
create_new_namespaces+0x3ea/0xb10 kernel/nsproxy.c:110
unshare_nsproxy_namespaces+0xc0/0x1f0 kernel/nsproxy.c:228
ksys_unshare+0x419/0x970 kernel/fork.c:3323
__do_sys_unshare kernel/fork.c:3394
Freed by task 63:
kfree+0x12a/0x3b0 mm/slub.c:4557
tipc_crypto_stop+0x23c/0x500 net/tipc/crypto.c:1539
tipc_exit_net+0x8c/0x110 net/tipc/core.c:119
ops_exit_list+0xb0/0x180 net/core/net_namespace.c:173
cleanup_net+0x5b7/0xbf0 net/core/net_namespace.c:640
process_one_work+0x9fb/0x1b60 kernel/workqueue.c:3231
After freed the tipc_crypto tx by delete namespace, tipc_aead_encrypt_done
may still visit it in cryptd_queue_worker workqueue.
I reproduce this issue by:
ip netns add ns1
ip link add veth1 type veth peer name veth2
ip link set veth1 netns ns1
ip netns exec ns1 tipc bearer enable media eth dev veth1
ip netns exec ns1 tipc node set key this_is_a_master_key master
ip netns exec ns1 tipc bearer disable media eth dev veth1
ip netns del ns1
The key of reproduction is that, simd_aead_encrypt is interrupted, leading
to crypto_simd_usable() return false. Thus, the cryptd_queue_worker is
triggered, and the tipc_crypto tx will be visited.
tipc_disc_timeout
tipc_bearer_xmit_skb
tipc_crypto_xmit
tipc_aead_encrypt
crypto_aead_encrypt
// encrypt()
simd_aead_encrypt
// crypto_simd_usable() is false
child = &ctx->cryptd_tfm->base;
simd_aead_encrypt
crypto_aead_encrypt
// encrypt()
cryptd_aead_encrypt_enqueue
cryptd_aead_enqueue
cryptd_enqueue_request
// trigger cryptd_queue_worker
queue_work_on(smp_processor_id(), cryptd_wq, &cpu_queue->work)
Fix this by holding net reference count before encrypt.
Reported-by: syzbot+55c12726619ff85ce1f6@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=55c12726619ff85ce1f6
Fixes: fc1b6d6de2 ("tipc: introduce TIPC encryption & authentication")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Link: https://patch.msgid.link/20250520101404.1341730-1-wangliang74@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Cong Wang says:
====================
net_sched: Fix HFSC qlen/backlog accounting bug and add selftest
This series addresses a long-standing bug in the HFSC qdisc where queue length
and backlog accounting could become inconsistent if a packet is dropped during
a peek-induced dequeue operation, and adds a corresponding selftest to tc-testing.
====================
Link: https://patch.msgid.link/20250518222038.58538-1-xiyou.wangcong@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This test reproduces a scenario where HFSC queue length and backlog accounting
can become inconsistent when a peek operation triggers a dequeue and possible
drop before the parent qdisc updates its counters. The test sets up a DRR root
qdisc with an HFSC class, netem, and blackhole children, and uses Scapy to
inject a packet. It helps to verify that HFSC correctly tracks qlen and backlog
even when packets are dropped during peek-induced dequeue.
Cc: Mingi Cho <mincho@theori.io>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250518222038.58538-3-xiyou.wangcong@gmail.com
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When enqueuing the first packet to an HFSC class, hfsc_enqueue() calls the
child qdisc's peek() operation before incrementing sch->q.qlen and
sch->qstats.backlog. If the child qdisc uses qdisc_peek_dequeued(), this may
trigger an immediate dequeue and potential packet drop. In such cases,
qdisc_tree_reduce_backlog() is called, but the HFSC qdisc's qlen and backlog
have not yet been updated, leading to inconsistent queue accounting. This
can leave an empty HFSC class in the active list, causing further
consequences like use-after-free.
This patch fixes the bug by moving the increment of sch->q.qlen and
sch->qstats.backlog before the call to the child qdisc's peek() operation.
This ensures that queue length and backlog are always accurate when packet
drops or dequeues are triggered during the peek.
Fixes: 12d0ad3be9 ("net/sched/sch_hfsc.c: handle corner cases where head may change invalidating calculated deadline")
Reported-by: Mingi Cho <mincho@theori.io>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250518222038.58538-2-xiyou.wangcong@gmail.com
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Generally PASID support requires ACS settings that usually create
single device groups, but there are some niche cases where we can get
multi-device groups and still have working PASID support. The primary
issue is that PCI switches are not required to treat PASID tagged TLPs
specially so appropriate ACS settings are required to route all TLPs to
the host bridge if PASID is going to work properly.
pci_enable_pasid() does check that each device that will use PASID has
the proper ACS settings to achieve this routing.
However, no-PASID devices can be combined with PASID capable devices
within the same topology using non-uniform ACS settings. In this case
the no-PASID devices may not have strict route to host ACS flags and
end up being grouped with the PASID devices.
This configuration fails to allow use of the PASID within the iommu
core code which wrongly checks if the no-PASID device supports PASID.
Fix this by ignoring no-PASID devices during the PASID validation. They
will never issue a PASID TLP anyhow so they can be ignored.
Fixes: c404f55c26 ("iommu: Validate the PASID in iommu_attach_device_pasid()")
Cc: stable@vger.kernel.org
Signed-off-by: Tushar Dave <tdave@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250520011937.3230557-1-tdave@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
I found that rename fails after cifs mount due to update of
lookup_one_qstr_excl().
mv a/c b/
mv: cannot move 'a/c' to 'b/c': No such file or directory
In order to rename to a new name regardless of whether the dentry is
negative, we need to get the dentry through lookup_one_qstr_excl().
So It will not return error if the name doesn't exist.
Fixes: 204a575e91 ("VFS: add common error checks to lookup_one_qstr_excl()")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If a shorter than assumed transfer was seen, a partial buffer will have
been filled. For that case it isn't sane to attempt to fill more into
the bundle before posting a completion, as that will cause a gap in
the received data.
Check if the iterator has hit zero and only allow to continue a bundle
operation if that is the case.
Also ensure that for putting finished buffers, only the current transfer
is accounted. Otherwise too many buffers may be put for a short transfer.
Link: https://github.com/axboe/liburing/issues/1409
Cc: stable@vger.kernel.org
Fixes: 7c71a0af81 ("io_uring/net: improve recv bundles")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull clk fixes from Stephen Boyd:
"Fixes for some SoC clk drivers:
- Define the gate clk for the OTG PHY on Rockchip RK3576 so the nvmem
driver actually works
- Initialize clk_hw_onecell_data::num before accessing the 'hws'
array to keep UBSAN happy
- Fix a perf degradation on the Allwinner D1 MMC clk that was making
things half bad
- Fix the Allwinner SNXI_CCU_MP_DATA_WITH_MUX_GATE_FEAT macro to have
proper order of arguments"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi-ng: d1: Add missing divider for MMC mod clocks
clk: s2mps11: initialise clk_hw_onecell_data::num before accessing ::hws[] in probe()
clk: sunxi-ng: fix order of arguments in clock macro
clk: rockchip: rk3576: define clk_otp_phy_g
Check for mismatches between casefold dirents and casefold directories.
A mismatch will cause lookups to fail, as we'll be doing the lookup with
the casefolded name, which won't match the non-casefolded dirent, and
vice versa.
Reported-by: Christopher Snowhill <chris@kode54.net>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_dirent_create_snapshot(), used in fsck, neglected to create a
casefolded dirent.
Just move this into dirent_create_key().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Changing the casefold option requires extra checks/work - factor out a
helper from bch2_fileattr_set() for the xattr code to use.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If the driver reset fails, it may not work properly.
Therefore, the ndo.open() operation should be rejected.
In this patch, the driver calls netif_device_detach()
before the reset and calls netif_device_attach()
after the reset succeeds. If the reset fails,
netif_device_attach() is not called. Therefore,
netdev does not present and cannot be opened.
If reset fails, only the PCI reset (via sysfs)
can be used to attempt recovery.
Fixes: 3f5a61f6d5 ("net: hibmcge: Add reset supported in this module")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250517095828.1763126-3-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the user dumps statistics, the hibmcge driver automatically
updates all statistics. If the driver is performing the reset operation,
the error data of 0xFFFFFFFF is updated.
Therefore, if the driver is resetting, the hbg_update_stats_by_info()
needs to return directly.
Fixes: c0bf9bf31e ("net: hibmcge: Add support for dump statistics")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250517095828.1763126-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 17ec3e71ba ("crypto: lib/Kconfig - Hide arch options from
user"), the CRYPTO_CHACHA20_NEON option is no longer selected by default
due to changes in how crypto library options are exposed and selected.
To restore the previous behavior and ensure CRYPTO_CHACHA20_NEON is
enabled, explicitly select CONFIG_CRYPTO_CHACHA20 in the defconfig. This
pulls in CRYPTO_LIB_CHACHA_INTERNAL and allows CRYPTO_CHACHA20_NEON to be
selected automatically as before.
Fixes: 17ec3e71ba ("crypto: lib/Kconfig - Hide arch options from user")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung SoC driver fixes for v6.15
1. Exynos ACPM driver (used on Google GS101): Fix timeout due to missing
responses from the firmware part.
2. Samsung USI (serial engines) driver: Correct ineffective
unconfiguring of the interface during probe removal.
* tag 'samsung-fixes-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: usi: prevent wrong bits inversion during unconfiguring
firmware: exynos-acpm: check saved RX before bailing out on empty RX queue
Link: https://lore.kernel.org/r/20250513101023.21552-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit 4dbd2b2ebe ("nvme-multipath: Add visibility for round-robin
io-policy") introduced the creation of the multipath sysfs group under
the NVMe head gendisk device node. However, it also inadvertently added
the same sysfs group under each namespace path device which head node
refers to and that is incorrect.
The multipath sysfs group should only be exposed through the namespace
head gendisk node. This is sufficient, as the head device already
provides symbolic links to the individual namespace paths it manages.
This patch fixes the issue by preventing the creation of the multipath
sysfs group under namespace path devices, ensuring it only appears under
the head disk node.
Fixes: 4dbd2b2ebe ("nvme-multipath: Add visibility for round-robin io-policy")
Signed-off-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Commit 5ef44b3cb4 ("xsk: Bring back busy polling support") fixed the
busy polling support in xsk for XDP_ZEROCOPY after it was broken in
commit 86e25f40aa ("net: napi: Add napi_config"). The busy polling
support with XDP_COPY remained broken since the napi_id setup in
xsk_rcv_check was removed.
Bring back the setup of napi_id for XDP_COPY so socket level SO_BUSYPOLL
can be used to poll the underlying napi.
Do the setup of napi_id for XDP_COPY in xsk_bind, as it is done
currently for XDP_ZEROCOPY. The setup of napi_id for XDP_COPY in
xsk_bind is safe because xsk_rcv_check checks that the rx queue at which
the packet arrives is equal to the queue_id that was supplied in bind.
This is done for both XDP_COPY and XDP_ZEROCOPY mode.
Tested using AF_XDP support in virtio-net by running the xsk_rr AF_XDP
benchmarking tool shared here:
https://lore.kernel.org/all/20250320163523.3501305-1-skhawaja@google.com/T/
Enabled socket busy polling using following commands in qemu,
```
sudo ethtool -L eth0 combined 1
echo 400 | sudo tee /proc/sys/net/core/busy_read
echo 100 | sudo tee /sys/class/net/eth0/napi_defer_hard_irqs
echo 15000 | sudo tee /sys/class/net/eth0/gro_flush_timeout
```
Fixes: 5ef44b3cb4 ("xsk: Bring back busy polling support")
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allows slcan to receive short messages (typically errors) from the serial
interface.
When error support was added to slcan protocol in
b32ff46685 ("can: slcan: extend the protocol
with error info") the minimum valid message size changed from 5 (minimum
standard can frame tIII0) to 3 ("e1a" is a valid protocol message, it is
one of the examples given in the comments for slcan_bump_err() ), but the
check for minimum message length prodicating all decoding was not adjusted.
This makes short error messages discarded and error frames not being
generated.
This patch changes the minimum length to the new minimum (3 characters,
excluding terminator, is now a valid message).
Signed-off-by: Carlos Sanchez <carlossanchez@geotab.com>
Fixes: b32ff46685 ("can: slcan: extend the protocol with error info")
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250520102305.1097494-1-carlossanchez@geotab.com
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Davidlohr Bueso <dave@stgolabs.net> says:
Four small patches - the first could be sent to Linus for v6.15
considering it is a missing nonblocking lookup conversion in the getblk
slowpath I had missed. The other two patches are small optimizations
found while reading the code, and one rocket science cleanup patch.
* patches from https://lore.kernel.org/20250515173925.147823-1-dave@stgolabs.net:
fs/buffer: optimize discard_buffer()
fs/buffer: remove superfluous statements
fs/buffer: avoid redundant lookup in getblk slowpath
fs/buffer: use sleeping lookup in __getblk_slowpath()
Link: https://lore.kernel.org/20250515173925.147823-1-dave@stgolabs.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
While invalidating, the clearing of the bits in discard_buffer()
is done in one fully ordered CAS operation. In the past this was
done via individual clear_bit(), until e7470ee89f (fs: buffer:
do not use unnecessary atomic operations when discarding buffers).
This implies that there were never strong ordering requirements
outside of being serialized by the buffer lock.
As such relax the ordering for archs that can benefit. Further,
the implied ordering in buffer_unlock() makes current cmpxchg
implied barrier redundant due to release semantics. And while in
theory the unlock could be part of the bulk clearing, it is
best to leave it explicit, but without the double barriers.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lore.kernel.org/20250515173925.147823-5-dave@stgolabs.net
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In furtherance of ongoing efforts to ensure people are aware of who
de-facto maintains/has an interest in specific parts of mm, as well trying
to avoid get_maintainers.pl listing only Andrew and the mailing list for
mm files - establish a reclaim memory management section and add relevant
maintainers/reviewers.
This is a key part of memory management so sensibly deserves its own
section.
This encompasses both 'classical' reclaim and MGLRU and thus reflects this
in the reviewers from both, as well as those who have contributed
specifically on the memcg side of things.
Link: https://lkml.kernel.org/r/20250512143122.87740-1-lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Qi Zheng <zhengqi.arch@bytedance.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On configs with CONFIG_ARM64_GCS=y, VM_SHADOW_STACK is bit 38. On configs
with CONFIG_HAVE_ARCH_USERFAULTFD_MINOR=y (selected by CONFIG_ARM64 when
CONFIG_USERFAULTFD=y), VM_UFFD_MINOR is _also_ bit 38.
This bit being shared by two different VMA flags could lead to all sorts
of unintended behaviors. Presumably, a process could maybe call into
userfaultfd in a way that disables the shadow stack vma flag. I can't
think of any attack where this would help (presumably, if an attacker
tries to disable shadow stacks, they are trying to hijack control flow so
can't arbitrarily call into userfaultfd yet anyway) but this still feels
somewhat scary.
Link: https://lkml.kernel.org/r/20250507131000.1204175-2-revest@chromium.org
Fixes: ae80e1629a ("mm: Define VM_SHADOW_STACK for arm64 when we support GCS")
Signed-off-by: Florent Revest <revest@chromium.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Florent Revest <revest@chromium.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thiago Jung Bauermann <thiago.bauermann@linaro.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
__alloc_pages_slowpath has no change detection for ac->nodemask in the
part of retry path, while cpuset can modify it in parallel. For some
processes that set mempolicy as MPOL_BIND, this results ac->nodemask
changes, and then the should_reclaim_retry will judge based on the latest
nodemask and jump to retry, while the get_page_from_freelist only
traverses the zonelist from ac->preferred_zoneref, which selected by a
expired nodemask and may cause infinite retries in some cases
cpu 64:
__alloc_pages_slowpath {
/* ..... */
retry:
/* ac->nodemask = 0x1, ac->preferred->zone->nid = 1 */
if (alloc_flags & ALLOC_KSWAPD)
wake_all_kswapds(order, gfp_mask, ac);
/* cpu 1:
cpuset_write_resmask
update_nodemask
update_nodemasks_hier
update_tasks_nodemask
mpol_rebind_task
mpol_rebind_policy
mpol_rebind_nodemask
// mempolicy->nodes has been modified,
// which ac->nodemask point to
*/
/* ac->nodemask = 0x3, ac->preferred->zone->nid = 1 */
if (should_reclaim_retry(gfp_mask, order, ac, alloc_flags,
did_some_progress > 0, &no_progress_loops))
goto retry;
}
Simultaneously starting multiple cpuset01 from LTP can quickly reproduce
this issue on a multi node server when the maximum memory pressure is
reached and the swap is enabled
Link: https://lkml.kernel.org/r/20250416082405.20988-1-zhangtianyang@loongson.cn
Fixes: c33d6c06f6 ("mm, page_alloc: avoid looking up the first zone in a zonelist twice")
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull remoteproc fix from Bjorn Andersson:
"Address a regression preventing the wireless subsystem remoteproc on
some Qualcomm platforms (e.g. SDM632) from working"
* tag 'rproc-v6.15-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: qcom_wcnss: Fix on platforms without fallback regulators
Pull crypto fixes from Herbert Xu:
"This fixes a regression in padata as well as an ancient double-free
bug in af_alg"
* tag 'v6.15-p7' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: algif_hash - fix double free in hash_accept
padata: do not leak refcount in reorder_work
SGMII_CTRL register, which specifies the active interface, was not
properly restored when resuming from suspend. This led to incorrect
interface selection after resume particularly in scenarios involving
the FPGA.
To fix this:
- Move the SGMII_CTRL setup out of the probe function.
- Initialize the register in the hardware initialization helper function,
which is called during both device initialization and resume.
This ensures the interface configuration is consistently restored after
suspend/resume cycles.
Fixes: a46d9d37c4 ("net: lan743x: Add support for SGMII interface")
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Link: https://patch.msgid.link/20250516035719.117960-1-thangaraj.s@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netdev_lock is already held when calling bnxt_ulp_irq_stop() and
bnxt_ulp_irq_restart(). When converting rtnl_lock to netdev_lock,
the original code was rtnl_dereference() to indicate that rtnl_lock
was already held. rcu_dereference_protected() is the correct
conversion after replacing rtnl_lock with netdev_lock.
Add a new helper netdev_lock_dereference() similar to
rtnl_dereference().
Fixes: 004b500801 ("eth: bnxt: remove most dependencies on RTNL")
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250519204130.3097027-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While the MDIO address of the internal PHY on Allwinner sun8i chips is
generally 1, of_mdio_parse_addr is used to cleanly parse the address
from the device-tree instead of hardcoding it.
A commit reworking the code ditched the parsed value and hardcoded the
value 1 instead, which didn't really break anything but is more fragile
and not future-proof.
Restore the initial behavior using the parsed address returned from the
helper.
Fixes: 634db83b82 ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs")
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Tested-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Link: https://patch.msgid.link/20250519164936.4172658-1-paulk@sys-base.io
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-05-19 (ice, idpf)
For ice:
Jake removes incorrect incrementing of MAC filter count.
Dave adds check for, prerequisite, switchdev mode before setting up LAG.
For idpf:
Pavan stores max_tx_hdr_size to prevent NULL pointer dereference during
reset.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
idpf: fix null-ptr-deref in idpf_features_check
ice: Fix LACP bonds without SRIOV environment
ice: fix vf->num_mac count with port representors
====================
Link: https://patch.msgid.link/20250519210523.1866503-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using random mac address is not an error since the driver continues to
function, it should be informative that the system has not assigned
a MAC address. This is inline with other drivers such as ax88796c,
dm9051 etc. Drop the error level to info level.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20250516122655.442808-1-nm@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On Qualcomm platforms if the board uses GPIO hogs msm_pinmux_request()
calls gpiochip_line_is_valid(). After commit 8015443e24 ("gpio: Hide
valid_mask from direct assignments") gpiochip_line_is_valid() uses
gc->gpiodev, which is NULL when GPIO hog pins are being processed.
Thus after this commit using GPIO hogs causes the following crash. In
order to fix this, verify that gc->gpiodev is not NULL.
Note: it is not possible to reorder calls (e.g. by calling
msm_gpio_init() before pinctrl registration or by splitting
pinctrl_register() into _and_init() and pinctrl_enable() and calling the
latter function after msm_gpio_init()) because GPIO chip registration
would fail with EPROBE_DEFER if pinctrl is not enabled at the time of
registration.
pc : gpiochip_line_is_valid+0x4/0x28
lr : msm_pinmux_request+0x24/0x40
sp : ffff8000808eb870
x29: ffff8000808eb870 x28: 0000000000000000 x27: 0000000000000000
x26: 0000000000000000 x25: ffff726240f9d040 x24: 0000000000000000
x23: ffff7262438c0510 x22: 0000000000000080 x21: ffff726243ea7000
x20: ffffab13f2c4e698 x19: 0000000000000080 x18: 00000000ffffffff
x17: ffff726242ba6000 x16: 0000000000000100 x15: 0000000000000028
x14: 0000000000000000 x13: 0000000000002948 x12: 0000000000000003
x11: 0000000000000078 x10: 0000000000002948 x9 : ffffab13f50eb5e8
x8 : 0000000003ecb21b x7 : 000000000000002d x6 : 0000000000000b68
x5 : 0000007fffffffff x4 : ffffab13f52f84a8 x3 : ffff8000808eb804
x2 : ffffab13f1de8190 x1 : 0000000000000080 x0 : 0000000000000000
Call trace:
gpiochip_line_is_valid+0x4/0x28 (P)
pin_request+0x208/0x2c0
pinmux_enable_setting+0xa0/0x2e0
pinctrl_commit_state+0x150/0x26c
pinctrl_enable+0x6c/0x2a4
pinctrl_register+0x3c/0xb0
devm_pinctrl_register+0x58/0xa0
msm_pinctrl_probe+0x2a8/0x584
sdm845_pinctrl_probe+0x20/0x88
platform_probe+0x68/0xc0
really_probe+0xbc/0x298
__driver_probe_device+0x78/0x12c
driver_probe_device+0x3c/0x160
__device_attach_driver+0xb8/0x138
bus_for_each_drv+0x84/0xe0
__device_attach+0x9c/0x188
device_initial_probe+0x14/0x20
bus_probe_device+0xac/0xb0
deferred_probe_work_func+0x8c/0xc8
process_one_work+0x208/0x5e8
worker_thread+0x1b4/0x35c
kthread+0x144/0x220
ret_from_fork+0x10/0x20
Code: b5fffba0 17fffff2 9432ec27 f9400400 (f9428800)
Fixes: 8015443e24 ("gpio: Hide valid_mask from direct assignments")
Reported-by: Doug Anderson <dianders@chromium.org>
Closes: https://lore.kernel.org/r/CAD=FV=Vg8_ZOLgLoC4WhFPzhVsxXFC19NrF38W6cW_W_3nFjbw@mail.gmail.com
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250513-pinctrl-msm-fix-v2-1-249999af0fc1@oss.qualcomm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
io_uring_cmd_import_fixed_vec() is declared in both
include/linux/io_uring/cmd.h and io_uring/uring_cmd.h. The declarations
are identical (if redundant) for CONFIG_IO_URING=y. But if
CONFIG_IO_URING=N, include/linux/io_uring/cmd.h declares the function as
static inline while io_uring/uring_cmd.h declares it as extern. This
causes linker errors if the declaration in io_uring/uring_cmd.h is used.
Remove the declaration in io_uring/uring_cmd.h to avoid linker errors
and prevent the declarations getting out of sync.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: ef49027529 ("io_uring/cmd: introduce io_uring_cmd_import_fixed_vec")
Link: https://lore.kernel.org/r/20250520193337.1374509-1-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Axel Forsman <axfo@kvaser.com> says:
This patch series fixes a couple of race conditions in the
kvaser_pciefd driver surfaced by enabling MSI interrupts and the new
Kvaser PCIe 8xCAN.
Changes since version 2:
* Rebase onto linux-can/main to resolve del_timer()/timer_delete()
merge conflict.
* Reword 2nd commit message slightly.
Changes since version 1:
* Change type of srb_cmd_reg from "__le32 __iomem *" to
"void __iomem *".
* Maintain TX FIFO count in driver instead of querying HW.
* Stop queue at end of .start_xmit() if full.
Link: https://patch.msgid.link/20250520114332.8961-1-axfo@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Going bus-off on a channel doing RX could result in dropped packets.
As netif_running() gets cleared before the channel abort procedure,
the handling of any last RDATA packets would see netif_rx() return
non-zero to signal a dropped packet. kvaser_pciefd_read_buffer() dealt
with this "error" by breaking out of processing the remaining DMA RX
buffer.
Only return an error from kvaser_pciefd_read_buffer() due to packet
corruption, otherwise handle it internally.
Cc: stable@vger.kernel.org
Signed-off-by: Axel Forsman <axfo@kvaser.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://patch.msgid.link/20250520114332.8961-4-axfo@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The functions kvaser_pciefd_start_xmit() and
kvaser_pciefd_handle_ack_packet() raced to stop/wake TX queues and
get/put echo skbs, as kvaser_pciefd_can->echo_lock was only ever taken
when transmitting and KCAN_TX_NR_PACKETS_CURRENT gets decremented
prior to handling of ACKs. E.g., this caused the following error:
can_put_echo_skb: BUG! echo_skb 5 is occupied!
Instead, use the synchronization helpers in netdev_queues.h. As those
piggyback on BQL barriers, start updating in-flight packets and bytes
counts as well.
Cc: stable@vger.kernel.org
Signed-off-by: Axel Forsman <axfo@kvaser.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com>
Reviewed-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://patch.msgid.link/20250520114332.8961-3-axfo@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Pull orangefs fix from Mike Marshall:
"Fix for orangefs page writeout counting"
* tag 'for-linus-6.15-ofs2' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: adjust counting code to recover from 665575cf
Block devices can be opened read-write even if they can't be written to
for historic reasons. Remove the check requiring file->f_op->write_iter
when the block devices was opened in loop_configure. The call to
loop_check_backing_file just below ensures the ->write_iter is present
for backing files opened for writing, which is the only check that is
actually needed.
Fixes: f5c84eff63 ("loop: Add sanity check for read/write_iter")
Reported-by: Christian Hesse <mail@eworm.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250520135420.1177312-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
A late commit to 6.14-rc7! broke orangefs. 665575cf seems like a
good change, but maybe should have been introduced during the merge
window. This patch adjusts the counting code associated with
writing out pages so that orangefs works in a 665575cf world.
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Marc Kleine-Budde says:
====================
pull-request: can 2025-05-20
this is a pull request of 3 patches for net/main.
The 1st patch is by Rob Herring, and fixes the $id path in the
microchip,mcp2510.yaml device tree bindinds documentation.
The last 2 patches are from Oliver Hartkopp and fix a use-after-free
read and an out-of-bounds read in the CAN Broadcast Manager (BCM)
protocol.
linux-can-fixes-for-6.15-20250520
* tag 'linux-can-fixes-for-6.15-20250520' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: bcm: add missing rcu read protection for procfs content
can: bcm: add locking for bcm_op runtime updates
dt-bindings: can: microchip,mcp2510: Fix $id path
====================
Link: https://patch.msgid.link/20250520091424.142121-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A few, quite rare, WMI attributes have names that are not compatible with
filenames, e.g. "Intel VT for Directed I/O (VT-d)".
For these cases the '/' gets replaced with '\' for display, but doesn't
get switched again when doing the WMI access.
Fix this by keeping the original attribute name and using that for sending
commands to the BIOS
Fixes: a40cd7ef22 ("platform/x86: think-lmi: Add WMI interface support on Lenovo platforms")
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20250520005027.3840705-1-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
If there is no stream data in file, v_len is zero.
So, If position(*pos) is zero, stream write will fail
due to stream write position validation check.
This patch reorganize stream write position validation.
Fixes: 0ca6df4f40 ("ksmbd: prevent out-of-bounds stream writes by validating *pos")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Multiple pointers in struct cifs_search_info (ntwrk_buf_start,
srch_entries_start, and last_entry) point to the same allocated buffer.
However, when freeing this buffer, only ntwrk_buf_start was set to NULL,
while the other pointers remained pointing to freed memory.
This is defensive programming to prevent potential issues with stale
pointers. While the active UAF vulnerability is fixed by the previous
patch, this change ensures consistent pointer state and more robust error
handling.
Signed-off-by: Wang Zhaolong <wangzhaolong1@huawei.com>
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Sysfs interface for updating firmware for RMI devices is available even
when F34 probe fails. The code checks for presence of F34 "container"
pointer and then tries to use the function data attached to the
sub-device. F34 assigns the function data early, before it knows if
probe will succeed, leaving behind a stale pointer.
Fix this by expanding checks to not only test for presence of F34
"container" but also check if there is driver data assigned to the
sub-device, and call dev_set_drvdata() only after we are certain that
probe is successful.
This is not a complete fix, since F34 will be freed during firmware
update, so there is still a race when fetching and accessing this
pointer. This race will be addressed in follow-up changes.
Reported-by: Hanno Böck <hanno@hboeck.de>
Fixes: 29fd0ec2bd ("Input: synaptics-rmi4 - add support for F34 device reflash")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/aBlAl6sGulam-Qcx@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
idpf_features_check is used to validate the TX packet. skb header
length is compared with the hardware supported value received from
the device control plane. The value is stored in the adapter structure
and to access it, vport pointer is used. During reset all the vports
are released and the vport pointer that the netdev private structure
points to is NULL.
To avoid null-ptr-deref, store the max header length value in netdev
private structure. This also helps to cache the value and avoid
accessing adapter pointer in hot path.
BUG: kernel NULL pointer dereference, address: 0000000000000068
...
RIP: 0010:idpf_features_check+0x6d/0xe0 [idpf]
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x154/0x520
? exc_page_fault+0x76/0x190
? asm_exc_page_fault+0x26/0x30
? idpf_features_check+0x6d/0xe0 [idpf]
netif_skb_features+0x88/0x310
validate_xmit_skb+0x2a/0x2b0
validate_xmit_skb_list+0x4c/0x70
sch_direct_xmit+0x19d/0x3a0
__dev_queue_xmit+0xb74/0xe70
...
Fixes: a251eee621 ("idpf: add SRIOV support and other ndo_ops")
Reviewed-by: Madhu Chititm <madhu.chittim@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Samuel Salin <Samuel.salin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
If an aggregate has the following conditions:
- The SRIOV LAG DDP package has been enabled
- The bond is in 802.3ad LACP mode
- The bond is disqualified from supporting SRIOV VF LAG
- Both interfaces were added simultaneously to the bond (same command)
Then there is a chance that the two interfaces will be assigned different
LACP Aggregator ID's. This will cause a failure of the LACP control over
the bond.
To fix this, we can detect if the primary interface for the bond (as
defined by the driver) is not in switchdev mode, and exit the setup flow
if so.
Reproduction steps:
%> ip link add bond0 type bond mode 802.3ad miimon 100
%> ip link set bond0 up
%> ifenslave bond0 eth0 eth1
%> cat /proc/net/bonding/bond0 | grep Agg
Check for Aggregator IDs that differ.
Fixes: ec5a6c5f79 ("ice: process events created by lag netdev event handler")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The ice_vc_repr_add_mac() function indicates that it does not store the MAC
address filters in the firmware. However, it still increments vf->num_mac.
This is incorrect, as vf->num_mac should represent the number of MAC
filters currently programmed to firmware.
Indeed, we only perform this increment if the requested filter is a unicast
address that doesn't match the existing vf->hw_lan_addr. In addition,
ice_vc_repr_del_mac() does not decrement the vf->num_mac counter. This
results in the counter becoming out of sync with the actual count.
As it turns out, vf->num_mac is currently only used in legacy made without
port representors. The single place where the value is checked is for
enforcing a filter limit on untrusted VFs.
Upcoming patches to support VF Live Migration will use this value when
determining the size of the TLV for MAC address filters. Fix the
representor mode function to stop incrementing the counter incorrectly.
Fixes: ac19e03ef7 ("ice: allow process VF opcodes in different ways")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The CAN broadcast manager (CAN BCM) can send a sequence of CAN frames via
hrtimer. The content and also the length of the sequence can be changed
resp reduced at runtime where the 'currframe' counter is then set to zero.
Although this appeared to be a safe operation the updates of 'currframe'
can be triggered from user space and hrtimer context in bcm_can_tx().
Anderson Nascimento created a proof of concept that triggered a KASAN
slab-out-of-bounds read access which can be prevented with a spin_lock_bh.
At the rework of bcm_can_tx() the 'count' variable has been moved into
the protected section as this variable can be modified from both contexts
too.
Fixes: ffd980f976 ("[CAN]: Add broadcast manager (bcm) protocol")
Reported-by: Anderson Nascimento <anderson@allelesecurity.com>
Tested-by: Anderson Nascimento <anderson@allelesecurity.com>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20250519125027.11900-1-socketcan@hartkopp.net
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add a new struct for platform data for the ti,am62-sdhci compatible to
apply additional quirks, namely "SDHCI_QUIRK2_SUPPRESS_V1P8_ENA", to
host controllers with am62 compatible.
Note, the fix was originally introduced by commit 941a7abd46
("mmc: sdhci_am654: Add sdhci_am654_start_signal_voltage_switch") but was
found to be applied too broadly and had to be reverted.
This fixes MMC init failures seen across am62x boards.
Fixes: ac5a41b472 ("Revert "mmc: sdhci_am654: Add sdhci_am654_start_signal_voltage_switch"")
Fixes: 941a7abd46 ("mmc: sdhci_am654: Add sdhci_am654_start_signal_voltage_switch")
Cc: stable@vger.kernel.org
Suggested-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250516203121.3736379-1-jm@ti.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
For SOCK_STREAM sockets, if user buffer size (len) is less
than skb size (skb->len), the remaining data from skb
will be lost after calling kfree_skb().
To fix this, move the statement for partial reading
above skb deletion.
Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org)
Fixes: 30a584d944 ("[LLX]: SOCK_DGRAM interface fixes")
Cc: stable@vger.kernel.org
Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov@infotecs.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
If accept(2) is called on socket type algif_hash with
MSG_MORE flag set and crypto_ahash_import fails,
sk2 is freed. However, it is also freed in af_alg_release,
leading to slab-use-after-free error.
Fixes: fe869cdb89 ("crypto: algif_hash - User-space interface for hash operations")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ivan Pravdin <ipravdin.official@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A recent patch that addressed a UAF introduced a reference count leak:
the parallel_data refcount is incremented unconditionally, regardless
of the return value of queue_work(). If the work item is already queued,
the incremented refcount is never decremented.
Fix this by checking the return value of queue_work() and decrementing
the refcount when necessary.
Resolves:
Unreferenced object 0xffff9d9f421e3d80 (size 192):
comm "cryptomgr_probe", pid 157, jiffies 4294694003
hex dump (first 32 bytes):
80 8b cf 41 9f 9d ff ff b8 97 e0 89 ff ff ff ff ...A............
d0 97 e0 89 ff ff ff ff 19 00 00 00 1f 88 23 00 ..............#.
backtrace (crc 838fb36):
__kmalloc_cache_noprof+0x284/0x320
padata_alloc_pd+0x20/0x1e0
padata_alloc_shell+0x3b/0xa0
0xffffffffc040a54d
cryptomgr_probe+0x43/0xc0
kthread+0xf6/0x1f0
ret_from_fork+0x2f/0x50
ret_from_fork_asm+0x1a/0x30
Fixes: dd7d37ccf6 ("padata: avoid UAF for reorder_work")
Cc: <stable@vger.kernel.org>
Signed-off-by: Dominik Grzegorzek <dominik.grzegorzek@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull Allwinner clk driver fixes from Chen-Yu Tsai:
Only two changes:
- Fix the order of arguments in clk macro for
SUNXI_CCU_MP_DATA_WITH_MUX_GATE_FEAT that was recently introduced in
v6.15-rc1
- Add missing post-divider for D1 MMC clocks to correct halved
performance
* tag 'sunxi-clk-fixes-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
clk: sunxi-ng: d1: Add missing divider for MMC mod clocks
clk: sunxi-ng: fix order of arguments in clock macro
btree_key_cache_fill() will allocate and traverse another path (for the
underlying btree), so we can't hold pointers to paths across a call - we
have to pass indices.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Do not recycle the page twice in airoha_qdma_rx_process routine in case
of error. Just run dev_kfree_skb() if the skb has been allocated and marked
for recycling. Run page_pool_put_full_page() directly if the skb has not
been allocated yet.
Moreover, rely on DMA address from queue entry element instead of reading
it from the DMA descriptor for DMA syncing in airoha_qdma_rx_process().
Fixes: e12182ddb6 ("net: airoha: Enable Rx Scatter-Gather")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250515-airoha-fix-rx-process-error-condition-v2-1-657e92c894b9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, when device mtu is updated, vmxnet3 updates netdev mtu, quiesces
the device and then reactivates it for the ESXi to know about the new mtu.
So, technically the OS stack can start using the new mtu before ESXi knows
about the new mtu.
This can lead to issues for TSO packets which use mss as per the new mtu
configured. This patch fixes this issue by moving the mtu write after
device quiesce.
Cc: stable@vger.kernel.org
Fixes: d1a890fa37 ("net: VMware virtual Ethernet NIC driver: vmxnet3")
Signed-off-by: Ronak Doshi <ronak.doshi@broadcom.com>
Acked-by: Guolin Yang <guolin.yang@broadcom.com>
Changes v1-> v2:
Moved MTU write after destroy of rx rings
Link: https://patch.msgid.link/20250515190457.8597-1-ronak.doshi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When netfilter defrag hooks are loaded (due to the presence of conntrack
rules, for example), fragmented packets entering the bridge will be
defragged by the bridge's pre-routing hook (br_nf_pre_routing() ->
ipv4_conntrack_defrag()).
Later on, in the bridge's post-routing hook, the defragged packet will
be fragmented again. If the size of the largest fragment is larger than
what the kernel has determined as the destination MTU (using
ip_skb_dst_mtu()), the defragged packet will be dropped.
Before commit ac6627a28d ("net: ipv4: Consolidate ipv4_mtu and
ip_dst_mtu_maybe_forward"), ip_skb_dst_mtu() would return dst_mtu() as
the destination MTU. Assuming the dst entry attached to the packet is
the bridge's fake rtable one, this would simply be the bridge's MTU (see
fake_mtu()).
However, after above mentioned commit, ip_skb_dst_mtu() ends up
returning the route's MTU stored in the dst entry's metrics. Ideally, in
case the dst entry is the bridge's fake rtable one, this should be the
bridge's MTU as the bridge takes care of updating this metric when its
MTU changes (see br_change_mtu()).
Unfortunately, the last operation is a no-op given the metrics attached
to the fake rtable entry are marked as read-only. Therefore,
ip_skb_dst_mtu() ends up returning 1500 (the initial MTU value) and
defragged packets are dropped during fragmentation when dealing with
large fragments and high MTU (e.g., 9k).
Fix by moving the fake rtable entry's metrics to be per-bridge (in a
similar fashion to the fake rtable entry itself) and marking them as
writable, thereby allowing MTU changes to be reflected.
Fixes: 62fa8a846d ("net: Implement read-only protection and COW'ing of metrics.")
Fixes: 33eb9873a2 ("bridge: initialize fake_rtable metrics")
Reported-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Closes: https://lore.kernel.org/netdev/PH0PR10MB4504888284FF4CBA648197D0ACB82@PH0PR10MB4504.namprd10.prod.outlook.com/
Tested-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250515084848.727706-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Syzkaller reports the following issue:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:578
netdev_lock include/linux/netdevice.h:2751 [inline]
netdev_lock_ops include/net/netdev_lock.h:42 [inline]
dev_set_promiscuity+0x10e/0x260 net/core/dev_api.c:285
bond_set_promiscuity drivers/net/bonding/bond_main.c:922 [inline]
bond_change_rx_flags+0x219/0x690 drivers/net/bonding/bond_main.c:4732
dev_change_rx_flags net/core/dev.c:9145 [inline]
__dev_set_promiscuity+0x3f5/0x590 net/core/dev.c:9189
netif_set_promiscuity+0x50/0xe0 net/core/dev.c:9201
dev_set_promiscuity+0x126/0x260 net/core/dev_api.c:286
^^ all of the above is under rcu lock
team_change_rx_flags+0x1b3/0x330 drivers/net/team/team_core.c:1785
dev_change_rx_flags net/core/dev.c:9145 [inline]
__dev_set_promiscuity+0x3f5/0x590 net/core/dev.c:9189
netif_set_promiscuity+0x50/0xe0 net/core/dev.c:9201
dev_set_promiscuity+0x126/0x260 net/core/dev_api.c:286
hsr_del_port+0x25e/0x2d0 net/hsr/hsr_slave.c:233
hsr_netdev_notify+0x827/0xb60 net/hsr/hsr_main.c:104
notifier_call_chain+0x1b3/0x3e0 kernel/notifier.c:85
call_netdevice_notifiers_extack net/core/dev.c:2214 [inline]
call_netdevice_notifiers net/core/dev.c:2228 [inline]
unregister_netdevice_many_notify+0x15d8/0x2330 net/core/dev.c:11970
rtnl_delete_link net/core/rtnetlink.c:3522 [inline]
rtnl_dellink+0x488/0x710 net/core/rtnetlink.c:3564
rtnetlink_rcv_msg+0x7cc/0xb70 net/core/rtnetlink.c:6955
netlink_rcv_skb+0x219/0x490 net/netlink/af_netlink.c:2534
netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline]
netlink_unicast+0x758/0x8d0 net/netlink/af_netlink.c:1339
netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1883
team_change_rx_flags runs under rcu lock which means we can't grab
instance lock for the lower devices. Switch to team->lock, similar
to what we already do for team_set_mac_address and team_change_mtu.
Fixes: 78cd408356 ("net: add missing instance lock to dev_set_promiscuity")
Reported-by: syzbot+53485086a41dbb43270a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=53485086a41dbb43270a
Link: https://lore.kernel.org/netdev/6822cc81.050a0220.f2294.00e8.GAE@google.com
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Link: https://patch.msgid.link/20250514220319.3505158-1-stfomichev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The debugfs summary output could access uninitialized elements in
the freq_in[] and signal_out[] arrays, causing NULL pointer
dereferences and triggering a kernel Oops (page_fault_oops).
This patch adds u8 fields (nr_freq_in, nr_signal_out) to track the
number of initialized elements, with a maximum of 4 per array.
The summary output functions are updated to respect these limits,
preventing out-of-bounds access and ensuring safe array handling.
Widen the label variables because the change confuses GCC about
max length of the strings.
Fixes: ef61f5528f ("ptp: ocp: add Adva timecard support")
Signed-off-by: Sagi Maimon <maimon.sagi@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20250514073541.35817-1-maimon.sagi@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ASoC: Fixes for v6.15
A collection of driver specific fixes that built up over the past few
weeks, plus one core patch which fixes handling of topology files where
some DAI names are substrings of others.
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- btusb: use skb_pull to avoid unsafe access in QCA dump handling
- L2CAP: Fix not checking l2cap_chan security level
* tag 'for-net-2025-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: btusb: use skb_pull to avoid unsafe access in QCA dump handling
Bluetooth: L2CAP: Fix not checking l2cap_chan security level
====================
Link: https://patch.msgid.link/20250515171909.1606243-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use skb_pull() and skb_pull_data() to safely parse QCA dump packets.
This avoids direct pointer math on skb->data, which could lead to
invalid access if the packet is shorter than expected.
Fixes: 20981ce2d5 ("Bluetooth: btusb: Add WCN6855 devcoredump support")
Signed-off-by: En-Wei Wu <en-wei.wu@canonical.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_check_enc_key_size shall check the security level of the
l2cap_chan rather than the hci_conn since for incoming connection
request that may be different as hci_conn may already been
encrypted using a different security level.
Fixes: 522e9ed157 ("Bluetooth: l2cap: Check encryption key size on incoming connection")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
RK3576's power domains have a peculiar design where the PD_NVM power
domain, of which the sdhci controller is a part, seemingly does not have
idempotent runtime disable/enable. The end effect is that if PD_NVM gets
turned off by the generic power domain logic because all the devices
depending on it are suspended, then the next time the sdhci device is
unsuspended, it'll hang the SoC as soon as it tries accessing the CQHCI
registers.
RK3576's UFS support needed a new dev_pm_genpd_rpm_always_on function
added to the generic power domains API to handle what appears to be a
similar hardware design.
Use this new function to ask for the same treatment in the sdhci
controller by giving rk3576 its own platform data with its own postinit
function. The benefit of doing this instead of marking the power domains
always on in the power domain core is that we only do this if we know
the platform we're running on actually uses the sdhci controller. For
others, keeping PD_NVM always on would be a waste, as they won't run
into this specific issue. The only other IP in PD_NVM that could be
affected is FSPI0. If it gets a mainline driver, it will probably want
to do the same thing.
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Fixes: cfee1b5077 ("pmdomain: rockchip: Add support for RK3576 SoC")
Cc: <stable@vger.kernel.org> # v6.15+
Link: https://lore.kernel.org/r/20250423-rk3576-emmc-fix-v3-1-0bf80e29967f@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
hda_generic_machine_select() appends -idisp to the tplg filename by
allocating a new string with devm_kasprintf(), then stores the string
right back into the global variable snd_soc_acpi_intel_hda_machines.
When the module is unloaded, this memory is freed, resulting in a global
variable pointing to freed memory. Reloading the module then triggers
a use-after-free:
BUG: KFENCE: use-after-free read in string+0x48/0xe0
Use-after-free read at 0x00000000967e0109 (in kfence-#99):
string+0x48/0xe0
vsnprintf+0x329/0x6e0
devm_kvasprintf+0x54/0xb0
devm_kasprintf+0x58/0x80
hda_machine_select.cold+0x198/0x17a2 [snd_sof_intel_hda_generic]
sof_probe_work+0x7f/0x600 [snd_sof]
process_one_work+0x17b/0x330
worker_thread+0x2ce/0x3f0
kthread+0xcf/0x100
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1a/0x30
kfence-#99: 0x00000000198a940f-0x00000000ace47d9d, size=64, cache=kmalloc-64
allocated by task 333 on cpu 8 at 17.798069s (130.453553s ago):
devm_kmalloc+0x52/0x120
devm_kvasprintf+0x66/0xb0
devm_kasprintf+0x58/0x80
hda_machine_select.cold+0x198/0x17a2 [snd_sof_intel_hda_generic]
sof_probe_work+0x7f/0x600 [snd_sof]
process_one_work+0x17b/0x330
worker_thread+0x2ce/0x3f0
kthread+0xcf/0x100
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1a/0x30
freed by task 1543 on cpu 4 at 141.586686s (6.665010s ago):
release_nodes+0x43/0xb0
devres_release_all+0x90/0xf0
device_unbind_cleanup+0xe/0x70
device_release_driver_internal+0x1c1/0x200
driver_detach+0x48/0x90
bus_remove_driver+0x6d/0xf0
pci_unregister_driver+0x42/0xb0
__do_sys_delete_module+0x1d1/0x310
do_syscall_64+0x82/0x190
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix it by copying the match array with devm_kmemdup_array() before we
modify it.
Fixes: 5458411d75 ("ASoC: SOF: Intel: hda: refactoring topology name fixup for HDA mach")
Suggested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Tavian Barnes <tavianator@tavianator.com>
Link: https://patch.msgid.link/570b15570b274520a0d9052f4e0f064a29c950ef.1747229716.git.tavianator@tavianator.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The two alarm LEDs of on the uDPU board are stopped working since
commit 78efa53e71 ("leds: Init leds class earlier").
The LEDs are driven by the GPIO{15,16} pins of the North Bridge
GPIO controller. These pins are part of the 'spi_quad' pin group
for which the 'spi' function is selected via the default pinctrl
state of the 'spi' node. This is wrong however, since in order to
allow controlling the LEDs, the pins should use the 'gpio' function.
Before the commit mentined above, the 'spi' function is selected
first by the pinctrl core before probing the spi driver, but then
it gets overridden to 'gpio' implicitly via the
devm_gpiod_get_index_optional() call from the 'leds-gpio' driver.
After the commit, the LED subsystem gets initialized before the
SPI subsystem, so the function of the pin group remains 'spi'
which in turn prevents controlling of the LEDs.
Despite the change of the initialization order, the root cause is
that the pinctrl state definition is wrong since its initial commit
0d45062cfc ("arm64: dts: marvell: Add device tree for uDPU board"),
To fix the problem, override the function in the 'spi_quad_pins'
node to 'gpio' and move the pinctrl state definition from the
'spi' node into the 'leds' node.
Cc: stable@vger.kernel.org # needs adjustment for < 6.1
Fixes: 0d45062cfc ("arm64: dts: marvell: Add device tree for uDPU board")
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Prior to this patch, the mark is sanitized (applying the state's mask to
the state's value) only on inserts when checking if a conflicting XFRM
state or policy exists.
We discovered in Cilium that this same sanitization does not occur
in the hot-path __xfrm_state_lookup. In the hot-path, the sk_buff's mark
is simply compared to the state's value:
if ((mark & x->mark.m) != x->mark.v)
continue;
Therefore, users can define unsanitized marks (ex. 0xf42/0xf00) which will
never match any packet.
This commit updates __xfrm_state_insert and xfrm_policy_insert to store
the sanitized marks, thus removing this footgun.
This has the side effect of changing the ip output, as the
returned mark will have the mask applied to it when printed.
Fixes: 3d6acfa764 ("xfrm: SA lookups with mark")
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Louis DeLosSantos <louis.delos.devel@gmail.com>
Co-developed-by: Louis DeLosSantos <louis.delos.devel@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The D1/R528/T113 SoCs have a hidden divider of 2 in the MMC mod clocks,
just as other recent SoCs. So far we did not describe that, which led
to the resulting MMC clock rate to be only half of its intended value.
Use a macro that allows to describe a fixed post-divider, to compensate
for that divisor.
This brings the MMC performance on those SoCs to its expected level,
so about 23 MB/s for SD cards, instead of the 11 MB/s measured so far.
Fixes: 35b97bb941 ("clk: sunxi-ng: Add support for the D1 SoC clocks")
Reported-by: Kuba Szczodrzyński <kuba@szczodrzynski.pl>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250501120631.837186-1-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Recent change to handle platforms with only single power domain broke
pronto-v3 which requires power domains and doesn't have fallback voltage
regulators in case power domains are missing. Add a check to verify
the number of fallback voltage regulators before using the code which
handles single power domain situation.
Fixes: 65991ea8a6 ("remoteproc: qcom_wcnss: Handle platforms with only single power domain")
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Tested-by: Luca Weiss <luca.weiss@fairphone.com> # sdm632-fairphone-fp3
Link: https://lore.kernel.org/r/20250511234026.94735-1-matti.lehtimaki@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
With UBSAN enabled, we're getting the following trace:
UBSAN: array-index-out-of-bounds in .../drivers/clk/clk-s2mps11.c:186:3
index 0 is out of range for type 'struct clk_hw *[] __counted_by(num)' (aka 'struct clk_hw *[]')
This is because commit f316cdff8d ("clk: Annotate struct
clk_hw_onecell_data with __counted_by") annotated the hws member of
that struct with __counted_by, which informs the bounds sanitizer about
the number of elements in hws, so that it can warn when hws is accessed
out of bounds.
As noted in that change, the __counted_by member must be initialised
with the number of elements before the first array access happens,
otherwise there will be a warning from each access prior to the
initialisation because the number of elements is zero. This occurs in
s2mps11_clk_probe() due to ::num being assigned after ::hws access.
Move the assignment to satisfy the requirement of assign-before-access.
Cc: stable@vger.kernel.org
Fixes: f316cdff8d ("clk: Annotate struct clk_hw_onecell_data with __counted_by")
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250326-s2mps11-ubsan-v1-1-fcc6fce5c8a9@linaro.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Commit 0116a7d84b ("ASoC: mediatek: mt6359: Add stub for
mt6359_accdet_enable_jack_detect") added a stub for
mt6359_accdet_enable_jack_detect() in order to allow the mt8188-mt6359
driver to be enabled without requiring the mt6359-accdet to also be
enabled, since it is not always needed.
However, in the case that CONFIG_SND_SOC_MT8188_MT6359=y and
CONFIG_SND_SOC_MT6359_ACCDET=m, a link error will happen, which commit
b19fa45715 ("ASoC: mediatek: mt8188-mt6359: select
CONFIG_SND_SOC_MT6359_ACCDET") solved by selecting
CONFIG_SND_SOC_MT6359_ACCDET.
In order to not require CONFIG_SND_SOC_MT6359_ACCDET as originally
intended, but also prevent the link error, depend on ACCDET being
enabled or disabled (which will force MT8188_MT6359=m if
MT6359_ACCDET=m).
Fixes: f35d834d67 ("ASoC: mediatek: mt8188-mt6359: Add accdet headset jack detect support")
Fixes: b19fa45715 ("ASoC: mediatek: mt8188-mt6359: select CONFIG_SND_SOC_MT6359_ACCDET")
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250507-mt8188-mt6359-accdet-depend-v1-1-aad70ce62964@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The error checking for of_count_phandle_with_args() does not handle
negative error codes correctly. The problem is that "index" is a u32 so
in the condition "if (index >= num_domains)" negative error codes stored
in "num_domains" are type promoted to very high positive values and
"index" is always going to be valid.
Test for negative error codes first and then test if "index" is valid.
Fixes: 3ccf3f0cd1 ("PM / Domains: Enable genpd_dev_pm_attach_by_id|name() for single PM domain")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/aBxPQ8AI8N5v-7rL@stanley.mountain
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Pull a Rockchip clk driver fix from Heiko Stuebner:
Actually define the gate-clk for the otg-phy on rk3576 to make the nvmem-
support work, that was merged for 6.15.
* tag 'v6.15-rockchip-clkfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: rk3576: define clk_otp_phy_g
The driver support was added without selecting the codec, which leads to
a link failure:
aarch64-linux-ld: sound/soc/mediatek/mt8188/mt8188-mt6359.o: in function `mt8188_mt6359_init':
mt8188-mt6359.c:(.text+0x19f0): undefined reference to `mt6359_accdet_enable_jack_detect'
Fixes: f35d834d67 ("ASoC: mediatek: mt8188-mt6359: Add accdet headset jack detect support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20250505052106.1811802-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When introducing the SUNXI_CCU_MP_DATA_WITH_MUX_GATE_FEAT macro, the order
of the last two arguments was different between the users and the
definition: features became flags and flags became features.
This just didn't end up in a disaster yet because most users ended up
passing 0 for both arguments, and other clocks (for the new A523 SoC) are
not yet used.
Swap the order of the arguments in the definition, so that users stay
untouched.
Fixes: cdbb9d0d09 ("clk: sunxi-ng: mp: provide wrappers for setting feature flags")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250430095325.477311-1-andre.przywara@arm.com
[wens@csie.org: fix typo in commit message]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
ipcomp_post_acomp currently drops all frags (via pskb_trim_unique(skb,
0)), and then subtracts the old skb->data_len from truesize. This
adjustment has already be done during trimming (in skb_condense), so
we don't need to do it again.
This shows up for example when running fragmented traffic over ipcomp,
we end up hitting the WARN_ON_ONCE in skb_try_coalesce.
Fixes: eb2953d269 ("xfrm: ipcomp: Use crypto_acomp interface")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
This fixes an issue that's caused if there is a mismatch between the data
offset in the GRO header and the length fields in the regular sk_buff due
to the pskb_pull()/skb_push() calls. That's because the UDP GRO layer
stripped off the UDP header via skb_gro_pull() already while the UDP
header was explicitly not pulled/pushed in this function.
For example, an IKE packet that triggered this had len=data_len=1268 and
the data_offset in the GRO header was 28 (IPv4 + UDP). So pskb_pull()
was called with an offset of 28-8=20, which reduced len to 1248 and via
pskb_may_pull() and __pskb_pull_tail() it also set data_len to 1248.
As the ESP offload module was not loaded, the function bailed out and
called skb_push(), which restored len to 1268, however, data_len remained
at 1248.
So while skb_headlen() was 0 before, it was now 20. The latter caused a
difference of 8 instead of 28 (or 0 if pskb_pull()/skb_push() was called
with the complete GRO data_offset) in gro_try_pull_from_frag0() that
triggered a call to gro_pull_from_frag0() that corrupted the packet.
This change uses a more GRO-like approach seen in other GRO receivers
via skb_gro_header() to just read the actual data we are interested in
and does not try to "restore" the UDP header at this point to call the
existing function. If the offload module is not loaded, it immediately
bails out, otherwise, it only does a quick check to see if the packet
is an IKE or keepalive packet instead of calling the existing function.
Fixes: 172bf009c1 ("xfrm: Support GRO for IPv4 ESP in UDP encapsulation")
Fixes: 221ddb723d ("xfrm: Support GRO for IPv6 ESP in UDP encapsulation")
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The current scheme for caching the encap socket can lead to reference
leaks when we try to delete the netns.
The reference chain is: xfrm_state -> enacp_sk -> netns
Since the encap socket is a userspace socket, it holds a reference on
the netns. If we delete the espintcp state (through flush or
individual delete) before removing the netns, the reference on the
socket is dropped and the netns is correctly deleted. Otherwise, the
netns may not be reachable anymore (if all processes within the ns
have terminated), so we cannot delete the xfrm state to drop its
reference on the socket.
This patch results in a small (~2% in my tests) performance
regression.
A GC-type mechanism could be added for the socket cache, to clear
references if the state hasn't been used "recently", but it's a lot
more complex than just not caching the socket.
Fixes: e27cca96cd ("xfrm: add espintcp (RFC 8229)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When we're polling for responses and get a response that corresponds to
another request, we save the RX data in order to drain the RX queue.
If the response for the current request is not found in the request's
iteration of the queue, or if the queue is empty, we must check whether
the RX data was saved by a previous request when it drained the RX queue.
We failed to check for already saved responses when the queue was empty,
and requests could time out. Check saved RX before bailing out on empty
RX queue.
Fixes: a88927b534 ("firmware: add Exynos ACPM protocol driver")
Reported-by: André Draszik <andre.draszik@linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Tested-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250324-acpm-drained-rx-queue-v1-1-577774335151@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2025-04-07 08:02:19 +02:00
143 changed files with 1514 additions and 856 deletions
/* bundle with no more immediate buffers, we're done */
if(req->flags&REQ_F_BL_EMPTY)
gotofinish;
/* if more is available, retry and append to this one */
if(!sr->retry&&kmsg->msg.msg_inq>0&&*ret>0){
/*
*IfmoreisavailableANDitwasafulltransfer,retryand
*appendtothisone
*/
if(!sr->retry&&kmsg->msg.msg_inq>0&&this_ret>0&&
!iov_iter_count(&kmsg->msg.msg_iter)){
req->cqe.flags=cflags&~CQE_F_MASK;
sr->len=kmsg->msg.msg_inq;
sr->done_io+=*ret;
sr->done_io+=this_ret;
sr->retry=true;
returnfalse;
}
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
