Linux 6.12

Pull x86 fixes from Borislav Petkov:

 - Make sure a kdump kernel with CONFIG_IMA_KEXEC enabled and booted on
   an AMD SME enabled hardware properly decrypts the ima_kexec buffer
   information passed to it from the previous kernel

 - Fix building the kernel with Clang where a non-TLS definition of the
   stack protector guard cookie leads to bogus code generation

 - Clear a wrongly advertised virtualized VMLOAD/VMSAVE feature flag on
   some Zen4 client systems as those insns are not supported on client

* tag 'x86_urgent_for_v6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Fix a kdump kernel failure on SME system when CONFIG_IMA_KEXEC=y
  x86/stackprotector: Work around strict Clang TLS symbol requirements
  x86/CPU/AMD: Clear virtualized VMLOAD/VMSAVE on Zen4 client

.mailmap

@@ -665,6 +665,7 @@ Tomeu Vizoso <tomeu@tomeuvizoso.net> <tomeu.vizoso@collabora.com>
 Thomas Graf <tgraf@suug.ch>
 Thomas Körper <socketcan@esd.eu> <thomas.koerper@esd.eu>
 Thomas Pedersen <twp@codeaurora.org>
+Thorsten Blum <thorsten.blum@linux.dev> <thorsten.blum@toblux.com>
 Tiezhu Yang <yangtiezhu@loongson.cn> <kernelpatch@126.com>
 Tingwei Zhang <quic_tingwei@quicinc.com> <tingwei@codeaurora.org>
 Tirupathi Reddy <quic_tirupath@quicinc.com> <tirupath@codeaurora.org>

CREDITS

@@ -1204,6 +1204,10 @@ S: Dreisbachstrasse 24
 S: D-57250 Netphen
 S: Germany
 
+N: Florian Fainelli
+E: f.fainelli@gmail.com
+D: DSA
+
 N: Rik Faith
 E: faith@acm.org
 D: Future Domain TMC-16x0 SCSI driver (author)

Documentation/ABI/stable/sysfs-block

@@ -594,6 +594,9 @@ Description:
 		[RW] Maximum number of kilobytes to read-ahead for filesystems
 		on this block device.
 
+		For MADV_HUGEPAGE, the readahead size may exceed this setting
+		since its granularity is based on the hugepage size.
+
 
 What:		/sys/block/<disk>/queue/rotational
 Date:		January 2009

Documentation/admin-guide/cgroup-v2.rst

@@ -1599,6 +1599,15 @@ The following nested keys are defined.
 	  pglazyfreed (npn)
 		Amount of reclaimed lazyfree pages
 
+	  swpin_zero
+		Number of pages swapped into memory and filled with zero, where I/O
+		was optimized out because the page content was detected to be zero
+		during swapout.
+
+	  swpout_zero
+		Number of zero-filled pages swapped out with I/O skipped due to the
+		content being detected as zero.
+
 	  zswpin
 		Number of pages moved in to memory from zswap.
 

Documentation/admin-guide/kernel-parameters.txt

@@ -6688,7 +6688,7 @@
 			0: no polling (default)
 
 	thp_anon=	[KNL]
-			Format: <size>,<size>[KMG]:<state>;<size>-<size>[KMG]:<state>
+			Format: <size>[KMG],<size>[KMG]:<state>;<size>[KMG]-<size>[KMG]:<state>
 			state is one of "always", "madvise", "never" or "inherit".
 			Control the default behavior of the system with respect
 			to anonymous transparent hugepages.
@@ -6727,6 +6727,15 @@
 	torture.verbose_sleep_duration= [KNL]
 			Duration of each verbose-printk() sleep in jiffies.
 
+	tpm.disable_pcr_integrity= [HW,TPM]
+			Do not protect PCR registers from unintended physical
+			access, or interposers in the bus by the means of
+			having an integrity protected session wrapped around
+			TPM2_PCR_Extend command. Consider this in a situation
+			where TPM is heavily utilized by IMA, thus protection
+			causing a major performance hit, and the space where
+			machines are deployed is by other means guarded.
+
 	tpm_suspend_pcr=[HW,TPM]
 			Format: integer pcr id
 			Specify that at suspend time, the tpm driver

Documentation/admin-guide/mm/transhuge.rst

@@ -303,7 +303,7 @@ control by passing the parameter ``transparent_hugepage=always`` or
 kernel command line.
 
 Alternatively, each supported anonymous THP size can be controlled by
-passing ``thp_anon=<size>,<size>[KMG]:<state>;<size>-<size>[KMG]:<state>``,
+passing ``thp_anon=<size>[KMG],<size>[KMG]:<state>;<size>[KMG]-<size>[KMG]:<state>``,
 where ``<size>`` is the THP size (must be a power of 2 of PAGE_SIZE and
 supported anonymous THP)  and ``<state>`` is one of ``always``, ``madvise``,
 ``never`` or ``inherit``.

Documentation/devicetree/bindings/firmware/arm,scmi.yaml

@@ -124,7 +124,7 @@ properties:
       atomic mode of operation, even if requested.
     default: 0
 
-  max-rx-timeout-ms:
+  arm,max-rx-timeout-ms:
     description:
       An optional time value, expressed in milliseconds, representing the
       transport maximum timeout value for the receive channel. The value should

Documentation/devicetree/bindings/net/xlnx,axi-ethernet.yaml

@@ -61,7 +61,7 @@ properties:
       - gmii
       - rgmii
       - sgmii
-      - 1000BaseX
+      - 1000base-x
 
   xlnx,phy-type:
     description:

Documentation/netlink/specs/mptcp_pm.yaml

@@ -293,7 +293,6 @@ operations:
       doc: Get endpoint information
       attribute-set: attr
       dont-validate: [ strict ]
-      flags: [ uns-admin-perm ]
       do: &get-addr-attrs
         request:
           attributes:

Documentation/networking/devmem.rst

@@ -225,6 +225,15 @@ The user must ensure the tokens are returned to the kernel in a timely manner.
 Failure to do so will exhaust the limited dmabuf that is bound to the RX queue
 and will lead to packet drops.
 
+The user must pass no more than 128 tokens, with no more than 1024 total frags
+among the token->token_count across all the tokens. If the user provides more
+than 1024 frags, the kernel will free up to 1024 frags and return early.
+
+The kernel returns the number of actual frags freed. The number of frags freed
+can be less than the tokens provided by the user in case of:
+
+(a) an internal kernel leak bug.
+(b) the user passed more than 1024 frags.
 
 Implementation & Caveats
 ========================

Documentation/networking/j1939.rst

@@ -121,7 +121,7 @@ format, the Group Extension is set in the PS-field.
 
 On the other hand, when using PDU1 format, the PS-field contains a so-called
 Destination Address, which is _not_ part of the PGN. When communicating a PGN
-from user space to kernel (or vice versa) and PDU2 format is used, the PS-field
+from user space to kernel (or vice versa) and PDU1 format is used, the PS-field
 of the PGN shall be set to zero. The Destination Address shall be set
 elsewhere.
 

Documentation/security/landlock.rst

@@ -11,18 +11,18 @@ Landlock LSM: kernel documentation
 
 Landlock's goal is to create scoped access-control (i.e. sandboxing).  To
 harden a whole system, this feature should be available to any process,
-including unprivileged ones.  Because such process may be compromised or
+including unprivileged ones.  Because such a process may be compromised or
 backdoored (i.e. untrusted), Landlock's features must be safe to use from the
 kernel and other processes point of view.  Landlock's interface must therefore
 expose a minimal attack surface.
 
 Landlock is designed to be usable by unprivileged processes while following the
 system security policy enforced by other access control mechanisms (e.g. DAC,
-LSM).  Indeed, a Landlock rule shall not interfere with other access-controls
-enforced on the system, only add more restrictions.
+LSM).  A Landlock rule shall not interfere with other access-controls enforced
+on the system, only add more restrictions.
 
 Any user can enforce Landlock rulesets on their processes.  They are merged and
-evaluated according to the inherited ones in a way that ensures that only more
+evaluated against inherited rulesets in a way that ensures that only more
 constraints can be added.
 
 User space documentation can be found here:
@@ -43,7 +43,7 @@ Guiding principles for safe access controls
   only impact the processes requesting them.
 * Resources (e.g. file descriptors) directly obtained from the kernel by a
   sandboxed process shall retain their scoped accesses (at the time of resource
-  acquisition) whatever process use them.
+  acquisition) whatever process uses them.
   Cf. `File descriptor access rights`_.
 
 Design choices
@@ -71,7 +71,7 @@ the same results, when they are executed under the same Landlock domain.
 Taking the ``LANDLOCK_ACCESS_FS_TRUNCATE`` right as an example, it may be
 allowed to open a file for writing without being allowed to
 :manpage:`ftruncate` the resulting file descriptor if the related file
-hierarchy doesn't grant such access right.  The following sequences of
+hierarchy doesn't grant that access right.  The following sequences of
 operations have the same semantic and should then have the same result:
 
 * ``truncate(path);``
@@ -81,7 +81,7 @@ Similarly to file access modes (e.g. ``O_RDWR``), Landlock access rights
 attached to file descriptors are retained even if they are passed between
 processes (e.g. through a Unix domain socket).  Such access rights will then be
 enforced even if the receiving process is not sandboxed by Landlock.  Indeed,
-this is required to keep a consistent access control over the whole system, and
+this is required to keep access controls consistent over the whole system, and
 this avoids unattended bypasses through file descriptor passing (i.e. confused
 deputy attack).
 

Documentation/userspace-api/landlock.rst

@@ -8,13 +8,13 @@ Landlock: unprivileged access control
 =====================================
 
 :Author: Mickaël Salaün
-:Date: September 2024
+:Date: October 2024
 
-The goal of Landlock is to enable to restrict ambient rights (e.g. global
+The goal of Landlock is to enable restriction of ambient rights (e.g. global
 filesystem or network access) for a set of processes.  Because Landlock
-is a stackable LSM, it makes possible to create safe security sandboxes as new
-security layers in addition to the existing system-wide access-controls. This
-kind of sandbox is expected to help mitigate the security impact of bugs or
+is a stackable LSM, it makes it possible to create safe security sandboxes as
+new security layers in addition to the existing system-wide access-controls.
+This kind of sandbox is expected to help mitigate the security impact of bugs or
 unexpected/malicious behaviors in user space applications.  Landlock empowers
 any process, including unprivileged ones, to securely restrict themselves.
 
@@ -86,8 +86,8 @@ to be explicit about the denied-by-default access rights.
             LANDLOCK_SCOPE_SIGNAL,
     };
 
-Because we may not know on which kernel version an application will be
-executed, it is safer to follow a best-effort security approach.  Indeed, we
+Because we may not know which kernel version an application will be executed
+on, it is safer to follow a best-effort security approach.  Indeed, we
 should try to protect users as much as possible whatever the kernel they are
 using.
 
@@ -129,7 +129,7 @@ version, and only use the available subset of access rights:
                                  LANDLOCK_SCOPE_SIGNAL);
     }
 
-This enables to create an inclusive ruleset that will contain our rules.
+This enables the creation of an inclusive ruleset that will contain our rules.
 
 .. code-block:: c
 
@@ -219,42 +219,41 @@ If the ``landlock_restrict_self`` system call succeeds, the current thread is
 now restricted and this policy will be enforced on all its subsequently created
 children as well.  Once a thread is landlocked, there is no way to remove its
 security policy; only adding more restrictions is allowed.  These threads are
-now in a new Landlock domain, merge of their parent one (if any) with the new
-ruleset.
+now in a new Landlock domain, which is a merger of their parent one (if any)
+with the new ruleset.
 
 Full working code can be found in `samples/landlock/sandboxer.c`_.
 
 Good practices
 --------------
 
-It is recommended setting access rights to file hierarchy leaves as much as
+It is recommended to set access rights to file hierarchy leaves as much as
 possible.  For instance, it is better to be able to have ``~/doc/`` as a
 read-only hierarchy and ``~/tmp/`` as a read-write hierarchy, compared to
 ``~/`` as a read-only hierarchy and ``~/tmp/`` as a read-write hierarchy.
 Following this good practice leads to self-sufficient hierarchies that do not
 depend on their location (i.e. parent directories).  This is particularly
 relevant when we want to allow linking or renaming.  Indeed, having consistent
-access rights per directory enables to change the location of such directory
+access rights per directory enables changing the location of such directories
 without relying on the destination directory access rights (except those that
 are required for this operation, see ``LANDLOCK_ACCESS_FS_REFER``
 documentation).
 
 Having self-sufficient hierarchies also helps to tighten the required access
 rights to the minimal set of data.  This also helps avoid sinkhole directories,
-i.e.  directories where data can be linked to but not linked from.  However,
+i.e. directories where data can be linked to but not linked from.  However,
 this depends on data organization, which might not be controlled by developers.
 In this case, granting read-write access to ``~/tmp/``, instead of write-only
-access, would potentially allow to move ``~/tmp/`` to a non-readable directory
+access, would potentially allow moving ``~/tmp/`` to a non-readable directory
 and still keep the ability to list the content of ``~/tmp/``.
 
 Layers of file path access rights
 ---------------------------------
 
 Each time a thread enforces a ruleset on itself, it updates its Landlock domain
-with a new layer of policy.  Indeed, this complementary policy is stacked with
-the potentially other rulesets already restricting this thread.  A sandboxed
-thread can then safely add more constraints to itself with a new enforced
-ruleset.
+with a new layer of policy.  This complementary policy is stacked with any
+other rulesets potentially already restricting this thread.  A sandboxed thread
+can then safely add more constraints to itself with a new enforced ruleset.
 
 One policy layer grants access to a file path if at least one of its rules
 encountered on the path grants the access.  A sandboxed thread can only access
@@ -265,7 +264,7 @@ etc.).
 Bind mounts and OverlayFS
 -------------------------
 
-Landlock enables to restrict access to file hierarchies, which means that these
+Landlock enables restricting access to file hierarchies, which means that these
 access rights can be propagated with bind mounts (cf.
 Documentation/filesystems/sharedsubtree.rst) but not with
 Documentation/filesystems/overlayfs.rst.
@@ -278,21 +277,21 @@ access to multiple file hierarchies at the same time, whether these hierarchies
 are the result of bind mounts or not.
 
 An OverlayFS mount point consists of upper and lower layers.  These layers are
-combined in a merge directory, result of the mount point.  This merge hierarchy
-may include files from the upper and lower layers, but modifications performed
-on the merge hierarchy only reflects on the upper layer.  From a Landlock
-policy point of view, each OverlayFS layers and merge hierarchies are
-standalone and contains their own set of files and directories, which is
-different from bind mounts.  A policy restricting an OverlayFS layer will not
-restrict the resulted merged hierarchy, and vice versa.  Landlock users should
-then only think about file hierarchies they want to allow access to, regardless
-of the underlying filesystem.
+combined in a merge directory, and that merged directory becomes available at
+the mount point.  This merge hierarchy may include files from the upper and
+lower layers, but modifications performed on the merge hierarchy only reflect
+on the upper layer.  From a Landlock policy point of view, all OverlayFS layers
+and merge hierarchies are standalone and each contains their own set of files
+and directories, which is different from bind mounts.  A policy restricting an
+OverlayFS layer will not restrict the resulted merged hierarchy, and vice versa.
+Landlock users should then only think about file hierarchies they want to allow
+access to, regardless of the underlying filesystem.
 
 Inheritance
 -----------
 
 Every new thread resulting from a :manpage:`clone(2)` inherits Landlock domain
-restrictions from its parent.  This is similar to the seccomp inheritance (cf.
+restrictions from its parent.  This is similar to seccomp inheritance (cf.
 Documentation/userspace-api/seccomp_filter.rst) or any other LSM dealing with
 task's :manpage:`credentials(7)`.  For instance, one process's thread may apply
 Landlock rules to itself, but they will not be automatically applied to other
@@ -311,8 +310,8 @@ Ptrace restrictions
 A sandboxed process has less privileges than a non-sandboxed process and must
 then be subject to additional restrictions when manipulating another process.
 To be allowed to use :manpage:`ptrace(2)` and related syscalls on a target
-process, a sandboxed process should have a subset of the target process rules,
-which means the tracee must be in a sub-domain of the tracer.
+process, a sandboxed process should have a superset of the target process's
+access rights, which means the tracee must be in a sub-domain of the tracer.
 
 IPC scoping
 -----------
@@ -322,7 +321,7 @@ interactions between sandboxes. Each Landlock domain can be explicitly scoped
 for a set of actions by specifying it on a ruleset.  For example, if a
 sandboxed process should not be able to :manpage:`connect(2)` to a
 non-sandboxed process through abstract :manpage:`unix(7)` sockets, we can
-specify such restriction with ``LANDLOCK_SCOPE_ABSTRACT_UNIX_SOCKET``.
+specify such a restriction with ``LANDLOCK_SCOPE_ABSTRACT_UNIX_SOCKET``.
 Moreover, if a sandboxed process should not be able to send a signal to a
 non-sandboxed process, we can specify this restriction with
 ``LANDLOCK_SCOPE_SIGNAL``.
@@ -394,7 +393,7 @@ Backward and forward compatibility
 Landlock is designed to be compatible with past and future versions of the
 kernel.  This is achieved thanks to the system call attributes and the
 associated bitflags, particularly the ruleset's ``handled_access_fs``.  Making
-handled access right explicit enables the kernel and user space to have a clear
+handled access rights explicit enables the kernel and user space to have a clear
 contract with each other.  This is required to make sure sandboxing will not
 get stricter with a system update, which could break applications.
 
@@ -563,33 +562,34 @@ always allowed when using a kernel that only supports the first or second ABI.
 Starting with the Landlock ABI version 3, it is now possible to securely control
 truncation thanks to the new ``LANDLOCK_ACCESS_FS_TRUNCATE`` access right.
 
-Network support (ABI < 4)
--------------------------
+TCP bind and connect (ABI < 4)
+------------------------------
 
 Starting with the Landlock ABI version 4, it is now possible to restrict TCP
 bind and connect actions to only a set of allowed ports thanks to the new
 ``LANDLOCK_ACCESS_NET_BIND_TCP`` and ``LANDLOCK_ACCESS_NET_CONNECT_TCP``
 access rights.
 
-IOCTL (ABI < 5)
----------------
+Device IOCTL (ABI < 5)
+----------------------
 
 IOCTL operations could not be denied before the fifth Landlock ABI, so
 :manpage:`ioctl(2)` is always allowed when using a kernel that only supports an
 earlier ABI.
 
 Starting with the Landlock ABI version 5, it is possible to restrict the use of
-:manpage:`ioctl(2)` using the new ``LANDLOCK_ACCESS_FS_IOCTL_DEV`` right.
+:manpage:`ioctl(2)` on character and block devices using the new
+``LANDLOCK_ACCESS_FS_IOCTL_DEV`` right.
 
-Abstract UNIX socket scoping (ABI < 6)
---------------------------------------
+Abstract UNIX socket (ABI < 6)
+------------------------------
 
 Starting with the Landlock ABI version 6, it is possible to restrict
 connections to an abstract :manpage:`unix(7)` socket by setting
 ``LANDLOCK_SCOPE_ABSTRACT_UNIX_SOCKET`` to the ``scoped`` ruleset attribute.
 
-Signal scoping (ABI < 6)
-------------------------
+Signal (ABI < 6)
+----------------
 
 Starting with the Landlock ABI version 6, it is possible to restrict
 :manpage:`signal(7)` sending by setting ``LANDLOCK_SCOPE_SIGNAL`` to the
@@ -605,9 +605,9 @@ Build time configuration
 
 Landlock was first introduced in Linux 5.13 but it must be configured at build
 time with ``CONFIG_SECURITY_LANDLOCK=y``.  Landlock must also be enabled at boot
-time as the other security modules.  The list of security modules enabled by
+time like other security modules.  The list of security modules enabled by
 default is set with ``CONFIG_LSM``.  The kernel configuration should then
-contains ``CONFIG_LSM=landlock,[...]`` with ``[...]``  as the list of other
+contain ``CONFIG_LSM=landlock,[...]`` with ``[...]``  as the list of other
 potentially useful security modules for the running system (see the
 ``CONFIG_LSM`` help).
 
@@ -669,7 +669,7 @@ Questions and answers
 What about user space sandbox managers?
 ---------------------------------------
 
-Using user space process to enforce restrictions on kernel resources can lead
+Using user space processes to enforce restrictions on kernel resources can lead
 to race conditions or inconsistent evaluations (i.e. `Incorrect mirroring of
 the OS code and state
 <https://www.ndss-symposium.org/ndss2003/traps-and-pitfalls-practical-problems-system-call-interposition-based-security-tools/>`_).

MAINTAINERS

@@ -1174,8 +1174,9 @@ F:	Documentation/hid/amd-sfh*
 F:	drivers/hid/amd-sfh-hid/
 
 AMD SPI DRIVER
-M:	Sanjay R Mehta <sanju.mehta@amd.com>
-S:	Maintained
+M:	Raju Rangoju <Raju.Rangoju@amd.com>
+L:	linux-spi@vger.kernel.org
+S:	Supported
 F:	drivers/spi/spi-amd.c
 
 AMD XGBE DRIVER
@@ -2852,7 +2853,7 @@ F:	Documentation/devicetree/bindings/arm/qcom.yaml
 F:	Documentation/devicetree/bindings/bus/qcom*
 F:	Documentation/devicetree/bindings/cache/qcom,llcc.yaml
 F:	Documentation/devicetree/bindings/firmware/qcom,scm.yaml
-F:	Documentation/devicetree/bindings/reserved-memory/qcom
+F:	Documentation/devicetree/bindings/reserved-memory/qcom*
 F:	Documentation/devicetree/bindings/soc/qcom/
 F:	arch/arm/boot/dts/qcom/
 F:	arch/arm/configs/qcom_defconfig
@@ -3745,6 +3746,7 @@ F:	drivers/spi/spi-axi-spi-engine.c
 AXI PWM GENERATOR
 M:	Michael Hennerich <michael.hennerich@analog.com>
 M:	Nuno Sá <nuno.sa@analog.com>
+R:	Trevor Gamblin <tgamblin@baylibre.com>
 L:	linux-pwm@vger.kernel.org
 S:	Supported
 W:	https://ez.analog.com/linux-software-drivers
@@ -16082,7 +16084,6 @@ F:	drivers/net/wireless/
 
 NETWORKING [DSA]
 M:	Andrew Lunn <andrew@lunn.ch>
-M:	Florian Fainelli <f.fainelli@gmail.com>
 M:	Vladimir Oltean <olteanv@gmail.com>
 S:	Maintained
 F:	Documentation/devicetree/bindings/net/dsa/
@@ -19578,6 +19579,17 @@ S:	Supported
 F:	Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml
 F:	drivers/i2c/busses/i2c-emev2.c
 
+RENESAS ETHERNET AVB DRIVER
+M:	Paul Barker <paul.barker.ct@bp.renesas.com>
+M:	Niklas Söderlund <niklas.soderlund@ragnatech.se>
+L:	netdev@vger.kernel.org
+L:	linux-renesas-soc@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/net/renesas,etheravb.yaml
+F:	drivers/net/ethernet/renesas/Kconfig
+F:	drivers/net/ethernet/renesas/Makefile
+F:	drivers/net/ethernet/renesas/ravb*
+
 RENESAS ETHERNET SWITCH DRIVER
 R:	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
 L:	netdev@vger.kernel.org
@@ -19627,6 +19639,14 @@ F:	Documentation/devicetree/bindings/i2c/renesas,rmobile-iic.yaml
 F:	drivers/i2c/busses/i2c-rcar.c
 F:	drivers/i2c/busses/i2c-sh_mobile.c
 
+RENESAS R-CAR SATA DRIVER
+M:	Geert Uytterhoeven <geert+renesas@glider.be>
+L:	linux-ide@vger.kernel.org
+L:	linux-renesas-soc@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/ata/renesas,rcar-sata.yaml
+F:	drivers/ata/sata_rcar.c
+
 RENESAS R-CAR THERMAL DRIVERS
 M:	Niklas Söderlund <niklas.soderlund@ragnatech.se>
 L:	linux-renesas-soc@vger.kernel.org
@@ -19702,6 +19722,17 @@ S:	Supported
 F:	Documentation/devicetree/bindings/i2c/renesas,rzv2m.yaml
 F:	drivers/i2c/busses/i2c-rzv2m.c
 
+RENESAS SUPERH ETHERNET DRIVER
+M:	Niklas Söderlund <niklas.soderlund@ragnatech.se>
+L:	netdev@vger.kernel.org
+L:	linux-renesas-soc@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/net/renesas,ether.yaml
+F:	drivers/net/ethernet/renesas/Kconfig
+F:	drivers/net/ethernet/renesas/Makefile
+F:	drivers/net/ethernet/renesas/sh_eth*
+F:	include/linux/sh_eth.h
+
 RENESAS USB PHY DRIVER
 M:	Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
 L:	linux-renesas-soc@vger.kernel.org
@@ -19846,12 +19877,10 @@ L:	linux-riscv@lists.infradead.org
 S:	Maintained
 Q:	https://patchwork.kernel.org/project/linux-riscv/list/
 T:	git https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux.git/
-F:	Documentation/devicetree/bindings/riscv/
-F:	arch/riscv/boot/dts/
-X:	arch/riscv/boot/dts/allwinner/
-X:	arch/riscv/boot/dts/renesas/
-X:	arch/riscv/boot/dts/sophgo/
-X:	arch/riscv/boot/dts/thead/
+F:	arch/riscv/boot/dts/canaan/
+F:	arch/riscv/boot/dts/microchip/
+F:	arch/riscv/boot/dts/sifive/
+F:	arch/riscv/boot/dts/starfive/
 
 RISC-V PMU DRIVERS
 M:	Atish Patra <atishp@atishpatra.org>
@@ -21618,6 +21647,15 @@ S:	Supported
 W:	https://github.com/thesofproject/linux/
 F:	sound/soc/sof/
 
+SOUND - GENERIC SOUND CARD (Simple-Audio-Card, Audio-Graph-Card)
+M:	Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+S:	Supported
+L:	linux-sound@vger.kernel.org
+F:	sound/soc/generic/
+F:	include/sound/simple_card*
+F:	Documentation/devicetree/bindings/sound/simple-card.yaml
+F:	Documentation/devicetree/bindings/sound/audio-graph*.yaml
+
 SOUNDWIRE SUBSYSTEM
 M:	Vinod Koul <vkoul@kernel.org>
 M:	Bard Liao <yung-chuan.liao@linux.intel.com>

Makefile

@@ -2,7 +2,7 @@
 VERSION = 6
 PATCHLEVEL = 12
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION =
 NAME = Baby Opossum Posse
 
 # *DOCUMENTATION*

arch/arm/Kconfig

@@ -1598,6 +1598,9 @@ config ATAGS_PROC
 config ARCH_SUPPORTS_CRASH_DUMP
 	def_bool y
 
+config ARCH_DEFAULT_CRASH_DUMP
+	def_bool y
+
 config AUTO_ZRELADDR
 	bool "Auto calculation of the decompressed kernel image address" if !ARCH_MULTIPLATFORM
 	default !(ARCH_FOOTBRIDGE || ARCH_RPC || ARCH_SA1100)

arch/arm/boot/dts/rockchip/rk3036-kylin.dts

@@ -325,8 +325,8 @@
 &i2c2 {
 	status = "okay";
 
-	rt5616: rt5616@1b {
-		compatible = "rt5616";
+	rt5616: audio-codec@1b {
+		compatible = "realtek,rt5616";
 		reg = <0x1b>;
 		clocks = <&cru SCLK_I2S_OUT>;
 		clock-names = "mclk";

arch/arm/boot/dts/rockchip/rk3036.dtsi

@@ -384,12 +384,13 @@
 		};
 	};
 
-	acodec: acodec-ana@20030000 {
-		compatible = "rk3036-codec";
+	acodec: audio-codec@20030000 {
+		compatible = "rockchip,rk3036-codec";
 		reg = <0x20030000 0x4000>;
-		rockchip,grf = <&grf>;
 		clock-names = "acodec_pclk";
 		clocks = <&cru PCLK_ACODEC>;
+		rockchip,grf = <&grf>;
+		#sound-dai-cells = <0>;
 		status = "disabled";
 	};
 
@@ -399,7 +400,6 @@
 		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru  PCLK_HDMI>;
 		clock-names = "pclk";
-		rockchip,grf = <&grf>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&hdmi_ctl>;
 		#sound-dai-cells = <0>;
@@ -553,11 +553,11 @@
 	};
 
 	spi: spi@20074000 {
-		compatible = "rockchip,rockchip-spi";
+		compatible = "rockchip,rk3036-spi";
 		reg = <0x20074000 0x1000>;
 		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&cru PCLK_SPI>, <&cru SCLK_SPI>;
-		clock-names = "apb-pclk","spi_pclk";
+		clocks = <&cru SCLK_SPI>, <&cru PCLK_SPI>;
+		clock-names = "spiclk", "apb_pclk";
 		dmas = <&pdma 8>, <&pdma 9>;
 		dma-names = "tx", "rx";
 		pinctrl-names = "default";

arch/arm/kernel/head.S

@@ -252,11 +252,15 @@ __create_page_tables:
 	 */
 	add	r0, r4, #KERNEL_OFFSET >> (SECTION_SHIFT - PMD_ENTRY_ORDER)
 	ldr	r6, =(_end - 1)
+
+	/* For XIP, kernel_sec_start/kernel_sec_end are currently in RO memory */
+#ifndef CONFIG_XIP_KERNEL
 	adr_l	r5, kernel_sec_start		@ _pa(kernel_sec_start)
 #if defined CONFIG_CPU_ENDIAN_BE8 || defined CONFIG_CPU_ENDIAN_BE32
 	str	r8, [r5, #4]			@ Save physical start of kernel (BE)
 #else
 	str	r8, [r5]			@ Save physical start of kernel (LE)
+#endif
 #endif
 	orr	r3, r8, r7			@ Add the MMU flags
 	add	r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ENTRY_ORDER)
@@ -264,6 +268,7 @@ __create_page_tables:
 	add	r3, r3, #1 << SECTION_SHIFT
 	cmp	r0, r6
 	bls	1b
+#ifndef CONFIG_XIP_KERNEL
 	eor	r3, r3, r7			@ Remove the MMU flags
 	adr_l	r5, kernel_sec_end		@ _pa(kernel_sec_end)
 #if defined CONFIG_CPU_ENDIAN_BE8 || defined CONFIG_CPU_ENDIAN_BE32
@@ -271,8 +276,7 @@ __create_page_tables:
 #else
 	str	r3, [r5]			@ Save physical end of kernel (LE)
 #endif
-
-#ifdef CONFIG_XIP_KERNEL
+#else
 	/*
 	 * Map the kernel image separately as it is not located in RAM.
 	 */
@@ -407,7 +411,11 @@ ENTRY(secondary_startup)
 	/*
 	 * Use the page tables supplied from  __cpu_up.
 	 */
+#ifdef CONFIG_XIP_KERNEL
+	ldr	r3, =(secondary_data + PLAT_PHYS_OFFSET - PAGE_OFFSET)
+#else
 	adr_l	r3, secondary_data
+#endif
 	mov_l	r12, __secondary_switched
 	ldrd	r4, r5, [r3, #0]		@ get secondary_data.pgdir
 ARM_BE8(eor	r4, r4, r5)			@ Swap r5 and r4 in BE:

arch/arm/kernel/psci_smp.c

@@ -45,8 +45,15 @@ extern void secondary_startup(void);
 static int psci_boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
 	if (psci_ops.cpu_on)
+#ifdef CONFIG_XIP_KERNEL
+		return psci_ops.cpu_on(cpu_logical_map(cpu),
+			((phys_addr_t)(&secondary_startup)
+			- XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
+			+ CONFIG_XIP_PHYS_ADDR));
+#else
 		return psci_ops.cpu_on(cpu_logical_map(cpu),
 					virt_to_idmap(&secondary_startup));
+#endif
 	return -ENODEV;
 }
 

arch/arm/kernel/traps.c

@@ -570,6 +570,7 @@ static int bad_syscall(int n, struct pt_regs *regs)
 static inline int
 __do_cache_op(unsigned long start, unsigned long end)
 {
+	unsigned int ua_flags;
 	int ret;
 
 	do {
@@ -578,7 +579,9 @@ __do_cache_op(unsigned long start, unsigned long end)
 		if (fatal_signal_pending(current))
 			return 0;
 
+		ua_flags = uaccess_save_and_enable();
 		ret = flush_icache_user_range(start, start + chunk);
+		uaccess_restore(ua_flags);
 		if (ret)
 			return ret;
 

arch/arm/mm/dma-mapping-nommu.c

@@ -39,7 +39,7 @@ void arch_setup_dma_ops(struct device *dev, bool coherent)
 		/*
 		 * Cache support for v7m is optional, so can be treated as
 		 * coherent if no cache has been detected. Note that it is not
-		 * enough to check if MPU is in use or not since in absense of
+		 * enough to check if MPU is in use or not since in absence of
 		 * MPU system memory map is used.
 		 */
 		dev->dma_coherent = cacheid ? coherent : true;

arch/arm/mm/idmap.c

@@ -84,8 +84,15 @@ static void identity_mapping_add(pgd_t *pgd, const char *text_start,
 	unsigned long addr, end;
 	unsigned long next;
 
+#ifdef CONFIG_XIP_KERNEL
+	addr = (phys_addr_t)(text_start) - XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
+		+ CONFIG_XIP_PHYS_ADDR;
+	end = (phys_addr_t)(text_end) - XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR)
+		+ CONFIG_XIP_PHYS_ADDR;
+#else
 	addr = virt_to_idmap(text_start);
 	end = virt_to_idmap(text_end);
+#endif
 	pr_info("Setting up static identity map for 0x%lx - 0x%lx\n", addr, end);
 
 	prot |= PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AF;

arch/arm/mm/mmu.c

@@ -1402,18 +1402,6 @@ static void __init devicemaps_init(const struct machine_desc *mdesc)
 		create_mapping(&map);
 	}
 
-	/*
-	 * Map the kernel if it is XIP.
-	 * It is always first in the modulearea.
-	 */
-#ifdef CONFIG_XIP_KERNEL
-	map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK);
-	map.virtual = MODULES_VADDR;
-	map.length = ((unsigned long)_exiprom - map.virtual + ~SECTION_MASK) & SECTION_MASK;
-	map.type = MT_ROM;
-	create_mapping(&map);
-#endif
-
 	/*
 	 * Map the cache flushing regions.
 	 */
@@ -1603,12 +1591,27 @@ static void __init map_kernel(void)
 	 * This will only persist until we turn on proper memory management later on
 	 * and we remap the whole kernel with page granularity.
 	 */
+#ifdef CONFIG_XIP_KERNEL
+	phys_addr_t kernel_nx_start = kernel_sec_start;
+#else
 	phys_addr_t kernel_x_start = kernel_sec_start;
 	phys_addr_t kernel_x_end = round_up(__pa(__init_end), SECTION_SIZE);
 	phys_addr_t kernel_nx_start = kernel_x_end;
+#endif
 	phys_addr_t kernel_nx_end = kernel_sec_end;
 	struct map_desc map;
 
+	/*
+	 * Map the kernel if it is XIP.
+	 * It is always first in the modulearea.
+	 */
+#ifdef CONFIG_XIP_KERNEL
+	map.pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & SECTION_MASK);
+	map.virtual = MODULES_VADDR;
+	map.length = ((unsigned long)_exiprom - map.virtual + ~SECTION_MASK) & SECTION_MASK;
+	map.type = MT_ROM;
+	create_mapping(&map);
+#else
 	map.pfn = __phys_to_pfn(kernel_x_start);
 	map.virtual = __phys_to_virt(kernel_x_start);
 	map.length = kernel_x_end - kernel_x_start;
@@ -1618,7 +1621,7 @@ static void __init map_kernel(void)
 	/* If the nx part is small it may end up covered by the tail of the RWX section */
 	if (kernel_x_end == kernel_nx_end)
 		return;
-
+#endif
 	map.pfn = __phys_to_pfn(kernel_nx_start);
 	map.virtual = __phys_to_virt(kernel_nx_start);
 	map.length = kernel_nx_end - kernel_nx_start;
@@ -1764,6 +1767,11 @@ void __init paging_init(const struct machine_desc *mdesc)
 {
 	void *zero_page;
 
+#ifdef CONFIG_XIP_KERNEL
+	/* Store the kernel RW RAM region start/end in these variables */
+	kernel_sec_start = CONFIG_PHYS_OFFSET & SECTION_MASK;
+	kernel_sec_end = round_up(__pa(_end), SECTION_SIZE);
+#endif
 	pr_debug("physical kernel sections: 0x%08llx-0x%08llx\n",
 		 kernel_sec_start, kernel_sec_end);
 

arch/arm/mm/proc-v7.S

@@ -94,7 +94,7 @@ SYM_TYPED_FUNC_START(cpu_v7_dcache_clean_area)
 	ret	lr
 SYM_FUNC_END(cpu_v7_dcache_clean_area)
 
-#ifdef CONFIG_ARM_PSCI
+#if defined(CONFIG_ARM_PSCI) && defined(CONFIG_HARDEN_BRANCH_PREDICTOR)
 	.arch_extension sec
 SYM_TYPED_FUNC_START(cpu_v7_smc_switch_mm)
 	stmfd	sp!, {r0 - r3}

arch/arm64/Kconfig

@@ -1576,6 +1576,9 @@ config ARCH_DEFAULT_KEXEC_IMAGE_VERIFY_SIG
 config ARCH_SUPPORTS_CRASH_DUMP
 	def_bool y
 
+config ARCH_DEFAULT_CRASH_DUMP
+	def_bool y
+
 config ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION
 	def_bool CRASH_RESERVE
 
@@ -2214,6 +2217,7 @@ config ARM64_SME
 	bool "ARM Scalable Matrix Extension support"
 	default y
 	depends on ARM64_SVE
+	depends on BROKEN
 	help
 	  The Scalable Matrix Extension (SME) is an extension to the AArch64
 	  execution state which utilises a substantial subset of the SVE

arch/arm64/boot/dts/freescale/imx8-ss-lvds0.dtsi

@@ -14,7 +14,7 @@ lvds0_subsys: bus@56240000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x56243000 0x4>;
 		#clock-cells = <1>;
-		clock-output-names = "mipi1_lis_lpcg_ipg_clk";
+		clock-output-names = "lvds0_lis_lpcg_ipg_clk";
 		power-domains = <&pd IMX_SC_R_MIPI_1>;
 	};
 
@@ -22,9 +22,9 @@ lvds0_subsys: bus@56240000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x5624300c 0x4>;
 		#clock-cells = <1>;
-		clock-output-names = "mipi1_pwm_lpcg_clk",
-				     "mipi1_pwm_lpcg_ipg_clk",
-				     "mipi1_pwm_lpcg_32k_clk";
+		clock-output-names = "lvds0_pwm_lpcg_clk",
+				     "lvds0_pwm_lpcg_ipg_clk",
+				     "lvds0_pwm_lpcg_32k_clk";
 		power-domains = <&pd IMX_SC_R_MIPI_1_PWM_0>;
 	};
 
@@ -32,8 +32,8 @@ lvds0_subsys: bus@56240000 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x56243010 0x4>;
 		#clock-cells = <1>;
-		clock-output-names = "mipi1_i2c0_lpcg_clk",
-				     "mipi1_i2c0_lpcg_ipg_clk";
+		clock-output-names = "lvds0_i2c0_lpcg_clk",
+				     "lvds0_i2c0_lpcg_ipg_clk";
 		power-domains = <&pd IMX_SC_R_MIPI_1_I2C_0>;
 	};
 

arch/arm64/boot/dts/freescale/imx8-ss-vpu.dtsi

@@ -15,7 +15,7 @@ vpu: vpu@2c000000 {
 	mu_m0: mailbox@2d000000 {
 		compatible = "fsl,imx6sx-mu";
 		reg = <0x2d000000 0x20000>;
-		interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
 		#mbox-cells = <2>;
 		power-domains = <&pd IMX_SC_R_VPU_MU_0>;
 		status = "disabled";
@@ -24,7 +24,7 @@ vpu: vpu@2c000000 {
 	mu1_m0: mailbox@2d020000 {
 		compatible = "fsl,imx6sx-mu";
 		reg = <0x2d020000 0x20000>;
-		interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
 		#mbox-cells = <2>;
 		power-domains = <&pd IMX_SC_R_VPU_MU_1>;
 		status = "disabled";

arch/arm64/boot/dts/freescale/imx8mp-phyboard-pollux-rdk.dts

@@ -218,6 +218,18 @@
 	};
 };
 
+&media_blk_ctrl {
+	/*
+	 * The LVDS panel on this device uses 72.4 MHz pixel clock,
+	 * set IMX8MP_VIDEO_PLL1 to 72.4 * 7 = 506.8 MHz so the LDB
+	 * serializer and LCDIFv3 scanout engine can reach accurate
+	 * pixel clock of exactly 72.4 MHz.
+	 */
+	assigned-clock-rates = <500000000>, <200000000>,
+			       <0>, <0>, <500000000>,
+			       <506800000>;
+};
+
 &snvs_pwrkey {
 	status = "okay";
 };

arch/arm64/boot/dts/freescale/imx8mp-skov-revb-mi1010ait-1cp1.dts

@@ -71,6 +71,7 @@
 	assigned-clock-rates = <500000000>, <200000000>, <0>,
 		/* IMX8MP_CLK_MEDIA_DISP2_PIX = pixelclk of lvds panel */
 		<68900000>,
+		<500000000>,
 		/* IMX8MP_VIDEO_PLL1 = IMX8MP_CLK_MEDIA_LDB * 2 */
 		<964600000>;
 };

arch/arm64/boot/dts/freescale/imx8mp.dtsi

@@ -1261,7 +1261,7 @@
 				compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b40000 0x10000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MP_CLK_DUMMY>,
+				clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
 					 <&clk IMX8MP_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MP_CLK_USDHC1_ROOT>;
 				clock-names = "ipg", "ahb", "per";
@@ -1275,7 +1275,7 @@
 				compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b50000 0x10000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MP_CLK_DUMMY>,
+				clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
 					 <&clk IMX8MP_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MP_CLK_USDHC2_ROOT>;
 				clock-names = "ipg", "ahb", "per";
@@ -1289,7 +1289,7 @@
 				compatible = "fsl,imx8mp-usdhc", "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
 				reg = <0x30b60000 0x10000>;
 				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MP_CLK_DUMMY>,
+				clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
 					 <&clk IMX8MP_CLK_NAND_USDHC_BUS>,
 					 <&clk IMX8MP_CLK_USDHC3_ROOT>;
 				clock-names = "ipg", "ahb", "per";

arch/arm64/boot/dts/freescale/imx8qxp-ss-vpu.dtsi

@@ -5,6 +5,14 @@
  * Author: Alexander Stein
  */
 
+&mu_m0 {
+	interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&mu1_m0 {
+	interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+};
+
 &vpu_core0 {
 	reg = <0x2d040000 0x10000>;
 };

arch/arm64/boot/dts/freescale/imx8ulp.dtsi

@@ -384,7 +384,7 @@
 			};
 
 			flexspi2: spi@29810000 {
-				compatible = "nxp,imx8mm-fspi";
+				compatible = "nxp,imx8ulp-fspi";
 				reg = <0x29810000 0x10000>, <0x60000000 0x10000000>;
 				reg-names = "fspi_base", "fspi_mmap";
 				#address-cells = <1>;

arch/arm64/boot/dts/qcom/msm8939.dtsi

@@ -248,7 +248,7 @@
 
 		smd-edge {
 			interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
-			mboxes = <&apcs1_mbox 0>;
+			qcom,ipc = <&apcs1_mbox 8 0>;
 			qcom,smd-edge = <15>;
 
 			rpm_requests: rpm-requests {

arch/arm64/boot/dts/qcom/sm8450.dtsi

@@ -1973,7 +1973,7 @@
 
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
-				 <&pcie1_phy>,
+				 <&pcie1_phy QMP_PCIE_PIPE_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_PCIE_1_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,

arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dts

@@ -139,6 +139,8 @@
 
 		pinctrl-0 = <&nvme_reg_en>;
 		pinctrl-names = "default";
+
+		regulator-boot-on;
 	};
 
 	vph_pwr: regulator-vph-pwr {

arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts

@@ -134,6 +134,8 @@
 
 		pinctrl-0 = <&nvme_reg_en>;
 		pinctrl-names = "default";
+
+		regulator-boot-on;
 	};
 };
 

arch/arm64/boot/dts/qcom/x1e80100-crd.dts

@@ -177,9 +177,9 @@
 		compatible = "qcom,x1e80100-sndcard";
 		model = "X1E80100-CRD";
 		audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
-				"TwitterLeft IN", "WSA WSA_SPK2 OUT",
+				"TweeterLeft IN", "WSA WSA_SPK2 OUT",
 				"WooferRight IN", "WSA2 WSA_SPK2 OUT",
-				"TwitterRight IN", "WSA2 WSA_SPK2 OUT",
+				"TweeterRight IN", "WSA2 WSA_SPK2 OUT",
 				"IN1_HPHL", "HPHL_OUT",
 				"IN2_HPHR", "HPHR_OUT",
 				"AMIC2", "MIC BIAS2",
@@ -300,6 +300,8 @@
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&nvme_reg_en>;
+
+		regulator-boot-on;
 	};
 
 	vreg_wwan: regulator-wwan {
@@ -933,7 +935,7 @@
 		reg = <0 1>;
 		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
-		sound-name-prefix = "TwitterLeft";
+		sound-name-prefix = "TweeterLeft";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
 		vdd-io-supply = <&vreg_l12b_1p2>;
 		qcom,port-mapping = <4 5 6 7 11 13>;
@@ -986,7 +988,7 @@
 		reg = <0 1>;
 		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
 		#sound-dai-cells = <0>;
-		sound-name-prefix = "TwitterRight";
+		sound-name-prefix = "TweeterRight";
 		vdd-1p8-supply = <&vreg_l15b_1p8>;
 		vdd-io-supply = <&vreg_l12b_1p2>;
 		qcom,port-mapping = <4 5 6 7 11 13>;

arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts

@@ -205,6 +205,8 @@
 
 		pinctrl-0 = <&nvme_reg_en>;
 		pinctrl-names = "default";
+
+		regulator-boot-on;
 	};
 };
 

arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi

@@ -164,6 +164,8 @@
 
 		pinctrl-0 = <&nvme_reg_en>;
 		pinctrl-names = "default";
+
+		regulator-boot-on;
 	};
 };
 

arch/arm64/boot/dts/qcom/x1e80100-qcp.dts

@@ -253,6 +253,8 @@
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&nvme_reg_en>;
+
+		regulator-boot-on;
 	};
 };
 

arch/arm64/boot/dts/qcom/x1e80100.dtsi

@@ -2924,14 +2924,14 @@
 				    "mhi";
 			#address-cells = <3>;
 			#size-cells = <2>;
-			ranges = <0x01000000 0 0x00000000 0 0x70200000 0 0x100000>,
-				 <0x02000000 0 0x70300000 0 0x70300000 0 0x3d00000>;
-			bus-range = <0 0xff>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x70200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x1d00000>;
+			bus-range = <0x00 0xff>;
 
 			dma-coherent;
 
 			linux,pci-domain = <6>;
-			num-lanes = <2>;
+			num-lanes = <4>;
 
 			interrupts = <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>,
@@ -2997,19 +2997,22 @@
 		};
 
 		pcie6a_phy: phy@1bfc000 {
-			compatible = "qcom,x1e80100-qmp-gen4x2-pcie-phy";
-			reg = <0 0x01bfc000 0 0x2000>;
+			compatible = "qcom,x1e80100-qmp-gen4x4-pcie-phy";
+			reg = <0 0x01bfc000 0 0x2000>,
+			      <0 0x01bfe000 0 0x2000>;
 
 			clocks = <&gcc GCC_PCIE_6A_PHY_AUX_CLK>,
 				 <&gcc GCC_PCIE_6A_CFG_AHB_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&tcsr TCSR_PCIE_4L_CLKREF_EN>,
 				 <&gcc GCC_PCIE_6A_PHY_RCHNG_CLK>,
-				 <&gcc GCC_PCIE_6A_PIPE_CLK>;
+				 <&gcc GCC_PCIE_6A_PIPE_CLK>,
+				 <&gcc GCC_PCIE_6A_PIPEDIV2_CLK>;
 			clock-names = "aux",
 				      "cfg_ahb",
 				      "ref",
 				      "rchng",
-				      "pipe";
+				      "pipe",
+				      "pipediv2";
 
 			resets = <&gcc GCC_PCIE_6A_PHY_BCR>,
 				 <&gcc GCC_PCIE_6A_NOCSR_COM_PHY_BCR>;
@@ -3021,6 +3024,8 @@
 
 			power-domains = <&gcc GCC_PCIE_6_PHY_GDSC>;
 
+			qcom,4ln-config-sel = <&tcsr 0x1a000 0>;
+
 			#clock-cells = <0>;
 			clock-output-names = "pcie6a_pipe_clk";
 
@@ -3097,7 +3102,7 @@
 			assigned-clocks = <&gcc GCC_PCIE_5_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			interconnects = <&pcie_south_anoc MASTER_PCIE_5 QCOM_ICC_TAG_ALWAYS
+			interconnects = <&pcie_north_anoc MASTER_PCIE_5 QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
 					 &cnoc_main SLAVE_PCIE_5 QCOM_ICC_TAG_ALWAYS>;
@@ -3124,14 +3129,16 @@
 
 			clocks = <&gcc GCC_PCIE_5_AUX_CLK>,
 				 <&gcc GCC_PCIE_5_CFG_AHB_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&tcsr TCSR_PCIE_2L_5_CLKREF_EN>,
 				 <&gcc GCC_PCIE_5_PHY_RCHNG_CLK>,
-				 <&gcc GCC_PCIE_5_PIPE_CLK>;
+				 <&gcc GCC_PCIE_5_PIPE_CLK>,
+				 <&gcc GCC_PCIE_5_PIPEDIV2_CLK>;
 			clock-names = "aux",
 				      "cfg_ahb",
 				      "ref",
 				      "rchng",
-				      "pipe";
+				      "pipe",
+				      "pipediv2";
 
 			resets = <&gcc GCC_PCIE_5_PHY_BCR>;
 			reset-names = "phy";
@@ -3166,8 +3173,8 @@
 				    "mhi";
 			#address-cells = <3>;
 			#size-cells = <2>;
-			ranges = <0x01000000 0 0x00000000 0 0x7c200000 0 0x100000>,
-				 <0x02000000 0 0x7c300000 0 0x7c300000 0 0x3d00000>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x7c200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x7c300000 0x0 0x7c300000 0x0 0x1d00000>;
 			bus-range = <0x00 0xff>;
 
 			dma-coherent;
@@ -3217,7 +3224,7 @@
 			assigned-clocks = <&gcc GCC_PCIE_4_AUX_CLK>;
 			assigned-clock-rates = <19200000>;
 
-			interconnects = <&pcie_south_anoc MASTER_PCIE_4 QCOM_ICC_TAG_ALWAYS
+			interconnects = <&pcie_north_anoc MASTER_PCIE_4 QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
 					 &cnoc_main SLAVE_PCIE_4 QCOM_ICC_TAG_ALWAYS>;
@@ -3254,14 +3261,16 @@
 
 			clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
 				 <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&tcsr TCSR_PCIE_2L_4_CLKREF_EN>,
 				 <&gcc GCC_PCIE_4_PHY_RCHNG_CLK>,
-				 <&gcc GCC_PCIE_4_PIPE_CLK>;
+				 <&gcc GCC_PCIE_4_PIPE_CLK>,
+				 <&gcc GCC_PCIE_4_PIPEDIV2_CLK>;
 			clock-names = "aux",
 				      "cfg_ahb",
 				      "ref",
 				      "rchng",
-				      "pipe";
+				      "pipe",
+				      "pipediv2";
 
 			resets = <&gcc GCC_PCIE_4_PHY_BCR>;
 			reset-names = "phy";
@@ -6084,7 +6093,8 @@
 			      <0 0x25a00000 0 0x200000>,
 			      <0 0x25c00000 0 0x200000>,
 			      <0 0x25e00000 0 0x200000>,
-			      <0 0x26000000 0 0x200000>;
+			      <0 0x26000000 0 0x200000>,
+			      <0 0x26200000 0 0x200000>;
 			reg-names = "llcc0_base",
 				    "llcc1_base",
 				    "llcc2_base",
@@ -6093,7 +6103,8 @@
 				    "llcc5_base",
 				    "llcc6_base",
 				    "llcc7_base",
-				    "llcc_broadcast_base";
+				    "llcc_broadcast_base",
+				    "llcc_broadcast_and_base";
 			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
 		};
 

arch/arm64/boot/dts/rockchip/px30-ringneck.dtsi

@@ -66,7 +66,6 @@
 	bus-width = <8>;
 	cap-mmc-highspeed;
 	mmc-hs200-1_8v;
-	supports-emmc;
 	mmc-pwrseq = <&emmc_pwrseq>;
 	non-removable;
 	vmmc-supply = <&vcc_3v3>;

arch/arm64/boot/dts/rockchip/rk3308-roc-cc.dts

@@ -36,14 +36,14 @@
 
 		power_led: led-0 {
 			label = "firefly:red:power";
-			linux,default-trigger = "ir-power-click";
+			linux,default-trigger = "default-on";
 			default-state = "on";
 			gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
 		};
 
 		user_led: led-1 {
 			label = "firefly:blue:user";
-			linux,default-trigger = "ir-user-click";
+			linux,default-trigger = "rc-feedback";
 			default-state = "off";
 			gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_HIGH>;
 		};

arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s-plus.dts

@@ -24,9 +24,7 @@
 	disable-wp;
 	mmc-hs200-1_8v;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
-	supports-emmc;
 	status = "okay";
 };

arch/arm64/boot/dts/rockchip/rk3328.dtsi

@@ -754,8 +754,7 @@
 		compatible = "rockchip,rk3328-dw-hdmi";
 		reg = <0x0 0xff3c0000 0x0 0x20000>;
 		reg-io-width = <4>;
-		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru PCLK_HDMI>,
 			 <&cru SCLK_HDMI_SFC>,
 			 <&cru SCLK_RTC32K>;

arch/arm64/boot/dts/rockchip/rk3368-lion.dtsi

@@ -61,7 +61,6 @@
 			fan: fan@18 {
 				compatible = "ti,amc6821";
 				reg = <0x18>;
-				#cooling-cells = <2>;
 			};
 
 			rtc_twi: rtc@6f {

arch/arm64/boot/dts/rockchip/rk3399-eaidk-610.dts

@@ -541,7 +541,7 @@
 	status = "okay";
 
 	rt5651: audio-codec@1a {
-		compatible = "rockchip,rt5651";
+		compatible = "realtek,rt5651";
 		reg = <0x1a>;
 		clocks = <&cru SCLK_I2S_8CH_OUT>;
 		clock-names = "mclk";

arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts

@@ -166,7 +166,6 @@
 		regulator-max-microvolt = <1800000>;
 		vin-supply = <&vcc3v3_sys>;
 		gpio = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
 	};
 
 	/* MIPI DSI panel 2.8v supply */
@@ -178,7 +177,6 @@
 		regulator-max-microvolt = <2800000>;
 		vin-supply = <&vcc3v3_sys>;
 		gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
 	};
 
 	vibrator {

arch/arm64/boot/dts/rockchip/rk3399-roc-pc-plus.dts

@@ -114,7 +114,6 @@
 	es8388: es8388@11 {
 		compatible = "everest,es8388";
 		reg = <0x11>;
-		clock-names = "mclk";
 		clocks = <&cru SCLK_I2S_8CH_OUT>;
 		#sound-dai-cells = <0>;
 	};

arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi

@@ -576,7 +576,7 @@
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
 		clocks = <&rk808 1>;
-		clock-names = "ext_clock";
+		clock-names = "txco";
 		device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
 		host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
 		shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;

arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts

@@ -163,7 +163,7 @@
 	status = "okay";
 
 	rt5651: rt5651@1a {
-		compatible = "rockchip,rt5651";
+		compatible = "realtek,rt5651";
 		reg = <0x1a>;
 		clocks = <&cru SCLK_I2S_8CH_OUT>;
 		clock-names = "mclk";

arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353p.dts

@@ -92,7 +92,7 @@
 };
 
 &i2c2 {
-	pintctrl-names = "default";
+	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2m1_xfer>;
 	status = "okay";
 

arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353v.dts

@@ -79,7 +79,7 @@
 };
 
 &i2c2 {
-	pintctrl-names = "default";
+	pinctrl-names = "default";
 	pinctrl-0 = <&i2c2m1_xfer>;
 	status = "okay";
 

arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts

@@ -449,9 +449,9 @@
 	bluetooth {
 		compatible = "brcm,bcm43438-bt";
 		clocks = <&pmucru CLK_RTC_32K>;
-		clock-names = "ext_clock";
-		device-wake-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
-		host-wake-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
+		clock-names = "txco";
+		device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
 		shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;

arch/arm64/boot/dts/rockchip/rk3566-lubancat-1.dts

@@ -507,7 +507,6 @@
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
-	supports-emmc;
 	status = "okay";
 };
 

arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi

@@ -684,11 +684,11 @@
 		compatible = "brcm,bcm43438-bt";
 		clocks = <&rk817 1>;
 		clock-names = "lpo";
-		device-wake-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
-		host-wake-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
+		device-wakeup-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
 		pinctrl-0 = <&bt_enable_h>, <&bt_host_wake_l>, <&bt_wake_h>;
 		pinctrl-names = "default";
+		shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
 		vbat-supply = <&vcc_wl>;
 		vddio-supply = <&vcca_1v8_pmu>;
 	};

arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi

@@ -402,9 +402,9 @@
 		clock-names = "lpo";
 		device-wakeup-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>;
 		host-wakeup-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>;
-		reset-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&bt_host_wake_h &bt_reg_on_h &bt_wake_host_h>;
+		shutdown-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
 		vbat-supply = <&vcc_3v3>;
 		vddio-supply = <&vcc_1v8>;
 	};

arch/arm64/boot/dts/rockchip/rk3568-lubancat-2.dts

@@ -589,7 +589,6 @@
 	non-removable;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd>;
-	supports-emmc;
 	status = "okay";
 };
 

arch/arm64/boot/dts/rockchip/rk3568-roc-pc.dts

@@ -272,7 +272,6 @@
 				regulator-name = "vdd_logic";
 				regulator-always-on;
 				regulator-boot-on;
-				regulator-init-microvolt = <900000>;
 				regulator-initial-mode = <0x2>;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1350000>;
@@ -285,7 +284,6 @@
 
 			vdd_gpu: DCDC_REG2 {
 				regulator-name = "vdd_gpu";
-				regulator-init-microvolt = <900000>;
 				regulator-initial-mode = <0x2>;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1350000>;
@@ -309,7 +307,6 @@
 
 			vdd_npu: DCDC_REG4 {
 				regulator-name = "vdd_npu";
-				regulator-init-microvolt = <900000>;
 				regulator-initial-mode = <0x2>;
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1350000>;

arch/arm64/boot/dts/rockchip/rk3588-base.dtsi

@@ -337,15 +337,19 @@
 			cache-unified;
 			next-level-cache = <&l3_cache>;
 		};
+	};
 
-		l3_cache: l3-cache {
-			compatible = "cache";
-			cache-size = <3145728>;
-			cache-line-size = <64>;
-			cache-sets = <4096>;
-			cache-level = <3>;
-			cache-unified;
-		};
+	/*
+	 * The L3 cache belongs to the DynamIQ Shared Unit (DSU),
+	 * so it's represented here, outside the "cpus" node
+	 */
+	l3_cache: l3-cache {
+		compatible = "cache";
+		cache-size = <3145728>;
+		cache-line-size = <64>;
+		cache-sets = <4096>;
+		cache-level = <3>;
+		cache-unified;
 	};
 
 	display_subsystem: display-subsystem {

arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts

@@ -328,7 +328,6 @@
 		compatible = "everest,es8388";
 		reg = <0x11>;
 		clocks = <&cru I2S0_8CH_MCLKOUT>;
-		clock-names = "mclk";
 		AVDD-supply = <&vcc_1v8_s0>;
 		DVDD-supply = <&vcc_1v8_s0>;
 		HPVDD-supply = <&vcc_3v3_s0>;

arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts

@@ -316,7 +316,6 @@
 		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
 		assigned-clock-rates = <12288000>;
 		clocks = <&cru I2S0_8CH_MCLKOUT>;
-		clock-names = "mclk";
 		AVDD-supply = <&avcc_1v8_codec_s0>;
 		DVDD-supply = <&avcc_1v8_codec_s0>;
 		HPVDD-supply = <&vcc_3v3_s0>;

arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts

@@ -304,12 +304,12 @@
 	};
 
 	cooling-maps {
-		map1 {
+		map0 {
 			trip = <&package_fan0>;
 			cooling-device = <&fan THERMAL_NO_LIMIT 1>;
 		};
 
-		map2 {
+		map1 {
 			trip = <&package_fan1>;
 			cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
 		};

arch/arm64/boot/dts/rockchip/rk3588-toybrick-x0.dts

@@ -428,7 +428,6 @@
 				regulator-boot-on;
 				regulator-min-microvolt = <550000>;
 				regulator-max-microvolt = <950000>;
-				regulator-init-microvolt = <750000>;
 				regulator-ramp-delay = <12500>;
 
 				regulator-state-mem {

arch/arm64/boot/dts/rockchip/rk3588-turing-rk1.dtsi

@@ -296,6 +296,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
 			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		system-power-controller;
 
 		vcc1-supply = <&vcc5v0_sys>;
 		vcc2-supply = <&vcc5v0_sys>;

arch/arm64/boot/dts/rockchip/rk3588s-indiedroid-nova.dts

@@ -377,7 +377,6 @@
 		assigned-clock-rates = <12288000>;
 		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
 		AVDD-supply = <&vcc_3v3_s3>;
-		clock-names = "mclk";
 		clocks = <&cru I2S0_8CH_MCLKOUT>;
 		DVDD-supply = <&vcc_1v8_s3>;
 		HPVDD-supply = <&vcc_3v3_s3>;

arch/arm64/include/asm/mman.h

@@ -6,6 +6,8 @@
 
 #ifndef BUILD_VDSO
 #include <linux/compiler.h>
+#include <linux/fs.h>
+#include <linux/shmem_fs.h>
 #include <linux/types.h>
 
 static inline unsigned long arch_calc_vm_prot_bits(unsigned long prot,
@@ -31,19 +33,21 @@ static inline unsigned long arch_calc_vm_prot_bits(unsigned long prot,
 }
 #define arch_calc_vm_prot_bits(prot, pkey) arch_calc_vm_prot_bits(prot, pkey)
 
-static inline unsigned long arch_calc_vm_flag_bits(unsigned long flags)
+static inline unsigned long arch_calc_vm_flag_bits(struct file *file,
+						   unsigned long flags)
 {
 	/*
 	 * Only allow MTE on anonymous mappings as these are guaranteed to be
 	 * backed by tags-capable memory. The vm_flags may be overridden by a
 	 * filesystem supporting MTE (RAM-based).
 	 */
-	if (system_supports_mte() && (flags & MAP_ANONYMOUS))
+	if (system_supports_mte() &&
+	    ((flags & MAP_ANONYMOUS) || shmem_file(file)))
 		return VM_MTE_ALLOWED;
 
 	return 0;
 }
-#define arch_calc_vm_flag_bits(flags) arch_calc_vm_flag_bits(flags)
+#define arch_calc_vm_flag_bits(file, flags) arch_calc_vm_flag_bits(file, flags)
 
 static inline bool arch_validate_prot(unsigned long prot,
 	unsigned long addr __always_unused)

arch/arm64/include/asm/topology.h

@@ -26,10 +26,6 @@ void update_freq_counters_refs(void);
 #define arch_scale_freq_invariant topology_scale_freq_invariant
 #define arch_scale_freq_ref topology_get_freq_ref
 
-#ifdef CONFIG_ACPI_CPPC_LIB
-#define arch_init_invariance_cppc topology_init_cpu_capacity_cppc
-#endif
-
 /* Replace task scheduler's default cpu-invariant accounting */
 #define arch_scale_cpu_capacity topology_get_cpu_scale
 

arch/arm64/kernel/fpsimd.c

@@ -1367,6 +1367,7 @@ static void sve_init_regs(void)
 	} else {
 		fpsimd_to_sve(current);
 		current->thread.fp_type = FP_STATE_SVE;
+		fpsimd_flush_task_state(current);
 	}
 }
 

arch/arm64/kernel/smccc-call.S

@@ -7,48 +7,19 @@
 
 #include <asm/asm-offsets.h>
 #include <asm/assembler.h>
-#include <asm/thread_info.h>
-
-/*
- * If we have SMCCC v1.3 and (as is likely) no SVE state in
- * the registers then set the SMCCC hint bit to say there's no
- * need to preserve it.  Do this by directly adjusting the SMCCC
- * function value which is already stored in x0 ready to be called.
- */
-SYM_FUNC_START(__arm_smccc_sve_check)
-
-	ldr_l	x16, smccc_has_sve_hint
-	cbz	x16, 2f
-
-	get_current_task x16
-	ldr	x16, [x16, #TSK_TI_FLAGS]
-	tbnz	x16, #TIF_FOREIGN_FPSTATE, 1f	// Any live FP state?
-	tbnz	x16, #TIF_SVE, 2f		// Does that state include SVE?
-
-1:	orr	x0, x0, ARM_SMCCC_1_3_SVE_HINT
-
-2:	ret
-SYM_FUNC_END(__arm_smccc_sve_check)
-EXPORT_SYMBOL(__arm_smccc_sve_check)
 
 	.macro SMCCC instr
-	stp     x29, x30, [sp, #-16]!
-	mov	x29, sp
-alternative_if ARM64_SVE
-	bl	__arm_smccc_sve_check
-alternative_else_nop_endif
 	\instr	#0
-	ldr	x4, [sp, #16]
+	ldr	x4, [sp]
 	stp	x0, x1, [x4, #ARM_SMCCC_RES_X0_OFFS]
 	stp	x2, x3, [x4, #ARM_SMCCC_RES_X2_OFFS]
-	ldr	x4, [sp, #24]
+	ldr	x4, [sp, #8]
 	cbz	x4, 1f /* no quirk structure */
 	ldr	x9, [x4, #ARM_SMCCC_QUIRK_ID_OFFS]
 	cmp	x9, #ARM_SMCCC_QUIRK_QCOM_A6
 	b.ne	1f
 	str	x6, [x4, ARM_SMCCC_QUIRK_STATE_OFFS]
-1:	ldp     x29, x30, [sp], #16
-	ret
+1:	ret
 	.endm
 
 /*

arch/loongarch/Kconfig

@@ -604,6 +604,9 @@ config ARCH_SUPPORTS_KEXEC
 config ARCH_SUPPORTS_CRASH_DUMP
 	def_bool y
 
+config ARCH_DEFAULT_CRASH_DUMP
+	def_bool y
+
 config ARCH_SELECTS_CRASH_DUMP
 	def_bool y
 	depends on CRASH_DUMP

arch/loongarch/include/asm/kasan.h

@@ -25,6 +25,7 @@
 /* 64-bit segment value. */
 #define XKPRANGE_UC_SEG		(0x8000)
 #define XKPRANGE_CC_SEG		(0x9000)
+#define XKPRANGE_WC_SEG		(0xa000)
 #define XKVRANGE_VC_SEG		(0xffff)
 
 /* Cached */
@@ -41,20 +42,28 @@
 #define XKPRANGE_UC_SHADOW_SIZE		(XKPRANGE_UC_SIZE >> KASAN_SHADOW_SCALE_SHIFT)
 #define XKPRANGE_UC_SHADOW_END		(XKPRANGE_UC_KASAN_OFFSET + XKPRANGE_UC_SHADOW_SIZE)
 
+/* WriteCombine */
+#define XKPRANGE_WC_START		WRITECOMBINE_BASE
+#define XKPRANGE_WC_SIZE		XRANGE_SIZE
+#define XKPRANGE_WC_KASAN_OFFSET	XKPRANGE_UC_SHADOW_END
+#define XKPRANGE_WC_SHADOW_SIZE		(XKPRANGE_WC_SIZE >> KASAN_SHADOW_SCALE_SHIFT)
+#define XKPRANGE_WC_SHADOW_END		(XKPRANGE_WC_KASAN_OFFSET + XKPRANGE_WC_SHADOW_SIZE)
+
 /* VMALLOC (Cached or UnCached)  */
 #define XKVRANGE_VC_START		MODULES_VADDR
 #define XKVRANGE_VC_SIZE		round_up(KFENCE_AREA_END - MODULES_VADDR + 1, PGDIR_SIZE)
-#define XKVRANGE_VC_KASAN_OFFSET	XKPRANGE_UC_SHADOW_END
+#define XKVRANGE_VC_KASAN_OFFSET	XKPRANGE_WC_SHADOW_END
 #define XKVRANGE_VC_SHADOW_SIZE		(XKVRANGE_VC_SIZE >> KASAN_SHADOW_SCALE_SHIFT)
 #define XKVRANGE_VC_SHADOW_END		(XKVRANGE_VC_KASAN_OFFSET + XKVRANGE_VC_SHADOW_SIZE)
 
 /* KAsan shadow memory start right after vmalloc. */
 #define KASAN_SHADOW_START		round_up(KFENCE_AREA_END, PGDIR_SIZE)
 #define KASAN_SHADOW_SIZE		(XKVRANGE_VC_SHADOW_END - XKPRANGE_CC_KASAN_OFFSET)
-#define KASAN_SHADOW_END		round_up(KASAN_SHADOW_START + KASAN_SHADOW_SIZE, PGDIR_SIZE)
+#define KASAN_SHADOW_END		(round_up(KASAN_SHADOW_START + KASAN_SHADOW_SIZE, PGDIR_SIZE) - 1)
 
 #define XKPRANGE_CC_SHADOW_OFFSET	(KASAN_SHADOW_START + XKPRANGE_CC_KASAN_OFFSET)
 #define XKPRANGE_UC_SHADOW_OFFSET	(KASAN_SHADOW_START + XKPRANGE_UC_KASAN_OFFSET)
+#define XKPRANGE_WC_SHADOW_OFFSET	(KASAN_SHADOW_START + XKPRANGE_WC_KASAN_OFFSET)
 #define XKVRANGE_VC_SHADOW_OFFSET	(KASAN_SHADOW_START + XKVRANGE_VC_KASAN_OFFSET)
 
 extern bool kasan_early_stage;

arch/loongarch/include/asm/page.h

@@ -113,10 +113,7 @@ struct page *tlb_virt_to_page(unsigned long kaddr);
 extern int __virt_addr_valid(volatile void *kaddr);
 #define virt_addr_valid(kaddr)	__virt_addr_valid((volatile void *)(kaddr))
 
-#define VM_DATA_DEFAULT_FLAGS \
-	(VM_READ | VM_WRITE | \
-	 ((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
-	 VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+#define VM_DATA_DEFAULT_FLAGS	VM_DATA_FLAGS_TSK_EXEC
 
 #include <asm-generic/memory_model.h>
 #include <asm-generic/getorder.h>

arch/loongarch/kernel/acpi.c

@@ -58,48 +58,48 @@ void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size)
 		return ioremap_cache(phys, size);
 }
 
-static int cpu_enumerated = 0;
-
 #ifdef CONFIG_SMP
-static int set_processor_mask(u32 id, u32 flags)
+static int set_processor_mask(u32 id, u32 pass)
 {
-	int nr_cpus;
-	int cpu, cpuid = id;
+	int cpu = -1, cpuid = id;
 
-	if (!cpu_enumerated)
-		nr_cpus = NR_CPUS;
-	else
-		nr_cpus = nr_cpu_ids;
-
-	if (num_processors >= nr_cpus) {
+	if (num_processors >= NR_CPUS) {
 		pr_warn(PREFIX "nr_cpus limit of %i reached."
-			" processor 0x%x ignored.\n", nr_cpus, cpuid);
+			" processor 0x%x ignored.\n", NR_CPUS, cpuid);
 
 		return -ENODEV;
 
 	}
+
 	if (cpuid == loongson_sysconf.boot_cpu_id)
 		cpu = 0;
-	else
-		cpu = find_first_zero_bit(cpumask_bits(cpu_present_mask), NR_CPUS);
 
-	if (!cpu_enumerated)
-		set_cpu_possible(cpu, true);
-
-	if (flags & ACPI_MADT_ENABLED) {
+	switch (pass) {
+	case 1: /* Pass 1 handle enabled processors */
+		if (cpu < 0)
+			cpu = find_first_zero_bit(cpumask_bits(cpu_present_mask), NR_CPUS);
 		num_processors++;
 		set_cpu_present(cpu, true);
-		__cpu_number_map[cpuid] = cpu;
-		__cpu_logical_map[cpu] = cpuid;
-	} else
+		break;
+	case 2: /* Pass 2 handle disabled processors */
+		if (cpu < 0)
+			cpu = find_first_zero_bit(cpumask_bits(cpu_possible_mask), NR_CPUS);
 		disabled_cpus++;
+		break;
+	default:
+		return cpu;
+	}
+
+	set_cpu_possible(cpu, true);
+	__cpu_number_map[cpuid] = cpu;
+	__cpu_logical_map[cpu] = cpuid;
 
 	return cpu;
 }
 #endif
 
 static int __init
-acpi_parse_processor(union acpi_subtable_headers *header, const unsigned long end)
+acpi_parse_p1_processor(union acpi_subtable_headers *header, const unsigned long end)
 {
 	struct acpi_madt_core_pic *processor = NULL;
 
@@ -110,12 +110,29 @@ acpi_parse_processor(union acpi_subtable_headers *header, const unsigned long en
 	acpi_table_print_madt_entry(&header->common);
 #ifdef CONFIG_SMP
 	acpi_core_pic[processor->core_id] = *processor;
-	set_processor_mask(processor->core_id, processor->flags);
+	if (processor->flags & ACPI_MADT_ENABLED)
+		set_processor_mask(processor->core_id, 1);
 #endif
 
 	return 0;
 }
 
+static int __init
+acpi_parse_p2_processor(union acpi_subtable_headers *header, const unsigned long end)
+{
+	struct acpi_madt_core_pic *processor = NULL;
+
+	processor = (struct acpi_madt_core_pic *)header;
+	if (BAD_MADT_ENTRY(processor, end))
+		return -EINVAL;
+
+#ifdef CONFIG_SMP
+	if (!(processor->flags & ACPI_MADT_ENABLED))
+		set_processor_mask(processor->core_id, 2);
+#endif
+
+	return 0;
+}
 static int __init
 acpi_parse_eio_master(union acpi_subtable_headers *header, const unsigned long end)
 {
@@ -143,12 +160,14 @@ static void __init acpi_process_madt(void)
 	}
 #endif
 	acpi_table_parse_madt(ACPI_MADT_TYPE_CORE_PIC,
-			acpi_parse_processor, MAX_CORE_PIC);
+			acpi_parse_p1_processor, MAX_CORE_PIC);
+
+	acpi_table_parse_madt(ACPI_MADT_TYPE_CORE_PIC,
+			acpi_parse_p2_processor, MAX_CORE_PIC);
 
 	acpi_table_parse_madt(ACPI_MADT_TYPE_EIO_PIC,
 			acpi_parse_eio_master, MAX_IO_PICS);
 
-	cpu_enumerated = 1;
 	loongson_sysconf.nr_cpus = num_processors;
 }
 
@@ -310,6 +329,10 @@ static int __ref acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
 	int nid;
 
 	nid = acpi_get_node(handle);
+
+	if (nid != NUMA_NO_NODE)
+		nid = early_cpu_to_node(cpu);
+
 	if (nid != NUMA_NO_NODE) {
 		set_cpuid_to_node(physid, nid);
 		node_set(nid, numa_nodes_parsed);
@@ -324,12 +347,14 @@ int acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, u32 acpi_id, int *pcpu
 {
 	int cpu;
 
-	cpu = set_processor_mask(physid, ACPI_MADT_ENABLED);
-	if (cpu < 0) {
+	cpu = cpu_number_map(physid);
+	if (cpu < 0 || cpu >= nr_cpu_ids) {
 		pr_info(PREFIX "Unable to map lapic to logical cpu number\n");
-		return cpu;
+		return -ERANGE;
 	}
 
+	num_processors++;
+	set_cpu_present(cpu, true);
 	acpi_map_cpu2node(handle, cpu, physid);
 
 	*pcpu = cpu;

arch/loongarch/kernel/paravirt.c

@@ -51,11 +51,18 @@ static u64 paravt_steal_clock(int cpu)
 }
 
 #ifdef CONFIG_SMP
+static struct smp_ops native_ops;
+
 static void pv_send_ipi_single(int cpu, unsigned int action)
 {
 	int min, old;
 	irq_cpustat_t *info = &per_cpu(irq_stat, cpu);
 
+	if (unlikely(action == ACTION_BOOT_CPU)) {
+		native_ops.send_ipi_single(cpu, action);
+		return;
+	}
+
 	old = atomic_fetch_or(BIT(action), &info->message);
 	if (old)
 		return;
@@ -75,6 +82,11 @@ static void pv_send_ipi_mask(const struct cpumask *mask, unsigned int action)
 	if (cpumask_empty(mask))
 		return;
 
+	if (unlikely(action == ACTION_BOOT_CPU)) {
+		native_ops.send_ipi_mask(mask, action);
+		return;
+	}
+
 	action = BIT(action);
 	for_each_cpu(i, mask) {
 		info = &per_cpu(irq_stat, i);
@@ -147,6 +159,8 @@ static void pv_init_ipi(void)
 {
 	int r, swi;
 
+	/* Init native ipi irq for ACTION_BOOT_CPU */
+	native_ops.init_ipi();
 	swi = get_percpu_irq(INT_SWI0);
 	if (swi < 0)
 		panic("SWI0 IRQ mapping failed\n");
@@ -193,6 +207,7 @@ int __init pv_ipi_init(void)
 		return 0;
 
 #ifdef CONFIG_SMP
+	native_ops		= mp_ops;
 	mp_ops.init_ipi		= pv_init_ipi;
 	mp_ops.send_ipi_single	= pv_send_ipi_single;
 	mp_ops.send_ipi_mask	= pv_send_ipi_mask;

arch/loongarch/kernel/smp.c

@@ -302,7 +302,7 @@ static void __init fdt_smp_setup(void)
 		__cpu_number_map[cpuid] = cpu;
 		__cpu_logical_map[cpu] = cpuid;
 
-		early_numa_add_cpu(cpu, 0);
+		early_numa_add_cpu(cpuid, 0);
 		set_cpuid_to_node(cpuid, 0);
 	}
 
@@ -331,11 +331,11 @@ void __init loongson_prepare_cpus(unsigned int max_cpus)
 	int i = 0;
 
 	parse_acpi_topology();
+	cpu_data[0].global_id = cpu_logical_map(0);
 
 	for (i = 0; i < loongson_sysconf.nr_cpus; i++) {
 		set_cpu_present(i, true);
 		csr_mail_send(0, __cpu_logical_map[i], 0);
-		cpu_data[i].global_id = __cpu_logical_map[i];
 	}
 
 	per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
@@ -380,6 +380,7 @@ void loongson_init_secondary(void)
 		     cpu_logical_map(cpu) / loongson_sysconf.cores_per_package;
 	cpu_data[cpu].core = pptt_enabled ? cpu_data[cpu].core :
 		     cpu_logical_map(cpu) % loongson_sysconf.cores_per_package;
+	cpu_data[cpu].global_id = cpu_logical_map(cpu);
 }
 
 void loongson_smp_finish(void)

arch/loongarch/mm/kasan_init.c

@@ -13,6 +13,13 @@
 
 static pgd_t kasan_pg_dir[PTRS_PER_PGD] __initdata __aligned(PAGE_SIZE);
 
+#ifdef __PAGETABLE_P4D_FOLDED
+#define __pgd_none(early, pgd) (0)
+#else
+#define __pgd_none(early, pgd) (early ? (pgd_val(pgd) == 0) : \
+(__pa(pgd_val(pgd)) == (unsigned long)__pa(kasan_early_shadow_p4d)))
+#endif
+
 #ifdef __PAGETABLE_PUD_FOLDED
 #define __p4d_none(early, p4d) (0)
 #else
@@ -55,6 +62,9 @@ void *kasan_mem_to_shadow(const void *addr)
 		case XKPRANGE_UC_SEG:
 			offset = XKPRANGE_UC_SHADOW_OFFSET;
 			break;
+		case XKPRANGE_WC_SEG:
+			offset = XKPRANGE_WC_SHADOW_OFFSET;
+			break;
 		case XKVRANGE_VC_SEG:
 			offset = XKVRANGE_VC_SHADOW_OFFSET;
 			break;
@@ -79,6 +89,8 @@ const void *kasan_shadow_to_mem(const void *shadow_addr)
 
 	if (addr >= XKVRANGE_VC_SHADOW_OFFSET)
 		return (void *)(((addr - XKVRANGE_VC_SHADOW_OFFSET) << KASAN_SHADOW_SCALE_SHIFT) + XKVRANGE_VC_START);
+	else if (addr >= XKPRANGE_WC_SHADOW_OFFSET)
+		return (void *)(((addr - XKPRANGE_WC_SHADOW_OFFSET) << KASAN_SHADOW_SCALE_SHIFT) + XKPRANGE_WC_START);
 	else if (addr >= XKPRANGE_UC_SHADOW_OFFSET)
 		return (void *)(((addr - XKPRANGE_UC_SHADOW_OFFSET) << KASAN_SHADOW_SCALE_SHIFT) + XKPRANGE_UC_START);
 	else if (addr >= XKPRANGE_CC_SHADOW_OFFSET)
@@ -142,6 +154,19 @@ static pud_t *__init kasan_pud_offset(p4d_t *p4dp, unsigned long addr, int node,
 	return pud_offset(p4dp, addr);
 }
 
+static p4d_t *__init kasan_p4d_offset(pgd_t *pgdp, unsigned long addr, int node, bool early)
+{
+	if (__pgd_none(early, pgdp_get(pgdp))) {
+		phys_addr_t p4d_phys = early ?
+			__pa_symbol(kasan_early_shadow_p4d) : kasan_alloc_zeroed_page(node);
+		if (!early)
+			memcpy(__va(p4d_phys), kasan_early_shadow_p4d, sizeof(kasan_early_shadow_p4d));
+		pgd_populate(&init_mm, pgdp, (p4d_t *)__va(p4d_phys));
+	}
+
+	return p4d_offset(pgdp, addr);
+}
+
 static void __init kasan_pte_populate(pmd_t *pmdp, unsigned long addr,
 				      unsigned long end, int node, bool early)
 {
@@ -178,19 +203,19 @@ static void __init kasan_pud_populate(p4d_t *p4dp, unsigned long addr,
 	do {
 		next = pud_addr_end(addr, end);
 		kasan_pmd_populate(pudp, addr, next, node, early);
-	} while (pudp++, addr = next, addr != end);
+	} while (pudp++, addr = next, addr != end && __pud_none(early, READ_ONCE(*pudp)));
 }
 
 static void __init kasan_p4d_populate(pgd_t *pgdp, unsigned long addr,
 					    unsigned long end, int node, bool early)
 {
 	unsigned long next;
-	p4d_t *p4dp = p4d_offset(pgdp, addr);
+	p4d_t *p4dp = kasan_p4d_offset(pgdp, addr, node, early);
 
 	do {
 		next = p4d_addr_end(addr, end);
 		kasan_pud_populate(p4dp, addr, next, node, early);
-	} while (p4dp++, addr = next, addr != end);
+	} while (p4dp++, addr = next, addr != end && __p4d_none(early, READ_ONCE(*p4dp)));
 }
 
 static void __init kasan_pgd_populate(unsigned long addr, unsigned long end,
@@ -218,7 +243,7 @@ static void __init kasan_map_populate(unsigned long start, unsigned long end,
 asmlinkage void __init kasan_early_init(void)
 {
 	BUILD_BUG_ON(!IS_ALIGNED(KASAN_SHADOW_START, PGDIR_SIZE));
-	BUILD_BUG_ON(!IS_ALIGNED(KASAN_SHADOW_END, PGDIR_SIZE));
+	BUILD_BUG_ON(!IS_ALIGNED(KASAN_SHADOW_END + 1, PGDIR_SIZE));
 }
 
 static inline void kasan_set_pgd(pgd_t *pgdp, pgd_t pgdval)
@@ -233,7 +258,7 @@ static void __init clear_pgds(unsigned long start, unsigned long end)
 	 * swapper_pg_dir. pgd_clear() can't be used
 	 * here because it's nop on 2,3-level pagetable setups
 	 */
-	for (; start < end; start += PGDIR_SIZE)
+	for (; start < end; start = pgd_addr_end(start, end))
 		kasan_set_pgd((pgd_t *)pgd_offset_k(start), __pgd(0));
 }
 
@@ -242,6 +267,17 @@ void __init kasan_init(void)
 	u64 i;
 	phys_addr_t pa_start, pa_end;
 
+	/*
+	 * If PGDIR_SIZE is too large for cpu_vabits, KASAN_SHADOW_END will
+	 * overflow UINTPTR_MAX and then looks like a user space address.
+	 * For example, PGDIR_SIZE of CONFIG_4KB_4LEVEL is 2^39, which is too
+	 * large for Loongson-2K series whose cpu_vabits = 39.
+	 */
+	if (KASAN_SHADOW_END < vm_map_base) {
+		pr_warn("PGDIR_SIZE too large for cpu_vabits, KernelAddressSanitizer disabled.\n");
+		return;
+	}
+
 	/*
 	 * PGD was populated as invalid_pmd_table or invalid_pud_table
 	 * in pagetable_init() which depends on how many levels of page

arch/mips/Kconfig

@@ -2876,6 +2876,9 @@ config ARCH_SUPPORTS_KEXEC
 config ARCH_SUPPORTS_CRASH_DUMP
 	def_bool y
 
+config ARCH_DEFAULT_CRASH_DUMP
+	def_bool y
+
 config PHYSICAL_START
 	hex "Physical address where the kernel is loaded"
 	default "0xffffffff84000000"

arch/mips/crypto/crc32-mips.c

@@ -123,20 +123,20 @@ static u32 crc32c_mips_le_hw(u32 crc_, const u8 *p, unsigned int len)
 		for (; len >= sizeof(u64); p += sizeof(u64), len -= sizeof(u64)) {
 			u64 value = get_unaligned_le64(p);
 
-			CRC32(crc, value, d);
+			CRC32C(crc, value, d);
 		}
 
 		if (len & sizeof(u32)) {
 			u32 value = get_unaligned_le32(p);
 
-			CRC32(crc, value, w);
+			CRC32C(crc, value, w);
 			p += sizeof(u32);
 		}
 	} else {
 		for (; len >= sizeof(u32); len -= sizeof(u32)) {
 			u32 value = get_unaligned_le32(p);
 
-			CRC32(crc, value, w);
+			CRC32C(crc, value, w);
 			p += sizeof(u32);
 		}
 	}

arch/parisc/include/asm/mman.h

@@ -2,6 +2,7 @@
 #ifndef __ASM_MMAN_H__
 #define __ASM_MMAN_H__
 
+#include <linux/fs.h>
 #include <uapi/asm/mman.h>
 
 /* PARISC cannot allow mdwe as it needs writable stacks */
@@ -11,7 +12,7 @@ static inline bool arch_memory_deny_write_exec_supported(void)
 }
 #define arch_memory_deny_write_exec_supported arch_memory_deny_write_exec_supported
 
-static inline unsigned long arch_calc_vm_flag_bits(unsigned long flags)
+static inline unsigned long arch_calc_vm_flag_bits(struct file *file, unsigned long flags)
 {
 	/*
 	 * The stack on parisc grows upwards, so if userspace requests memory
@@ -23,6 +24,6 @@ static inline unsigned long arch_calc_vm_flag_bits(unsigned long flags)
 
 	return 0;
 }
-#define arch_calc_vm_flag_bits(flags) arch_calc_vm_flag_bits(flags)
+#define arch_calc_vm_flag_bits(file, flags) arch_calc_vm_flag_bits(file, flags)
 
 #endif /* __ASM_MMAN_H__ */

arch/powerpc/Kconfig

@@ -684,6 +684,10 @@ config RELOCATABLE_TEST
 config ARCH_SUPPORTS_CRASH_DUMP
 	def_bool PPC64 || PPC_BOOK3S_32 || PPC_85xx || (44x && !SMP)
 
+config ARCH_DEFAULT_CRASH_DUMP
+	bool
+	default y if !PPC_BOOK3S_32
+
 config ARCH_SELECTS_CRASH_DUMP
 	def_bool y
 	depends on CRASH_DUMP

arch/powerpc/kvm/book3s_hv.c

@@ -4898,6 +4898,18 @@ int kvmhv_run_single_vcpu(struct kvm_vcpu *vcpu, u64 time_limit,
 							   BOOK3S_INTERRUPT_EXTERNAL, 0);
 			else
 				lpcr |= LPCR_MER;
+		} else {
+			/*
+			 * L1's copy of L2's LPCR (vcpu->arch.vcore->lpcr) can get its MER bit
+			 * unexpectedly set - for e.g. during NMI handling when all register
+			 * states are synchronized from L0 to L1. L1 needs to inform L0 about
+			 * MER=1 only when there are pending external interrupts.
+			 * In the above if check, MER bit is set if there are pending
+			 * external interrupts. Hence, explicity mask off MER bit
+			 * here as otherwise it may generate spurious interrupts in L2 KVM
+			 * causing an endless loop, which results in L2 guest getting hung.
+			 */
+			lpcr &= ~LPCR_MER;
 		}
 	} else if (vcpu->arch.pending_exceptions ||
 		   vcpu->arch.doorbell_request ||

arch/riscv/Kconfig

@@ -898,6 +898,9 @@ config ARCH_SUPPORTS_KEXEC_PURGATORY
 config ARCH_SUPPORTS_CRASH_DUMP
 	def_bool y
 
+config ARCH_DEFAULT_CRASH_DUMP
+	def_bool y
+
 config ARCH_HAS_GENERIC_CRASHKERNEL_RESERVATION
 	def_bool CRASH_RESERVE
 

arch/riscv/boot/dts/sophgo/sg2042.dtsi

@@ -112,7 +112,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <32>;
+				ngpios = <32>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
@@ -134,7 +134,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <32>;
+				ngpios = <32>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;
@@ -156,7 +156,7 @@
 				compatible = "snps,dw-apb-gpio-port";
 				gpio-controller;
 				#gpio-cells = <2>;
-				snps,nr-gpios = <32>;
+				ngpios = <32>;
 				reg = <0>;
 				interrupt-controller;
 				#interrupt-cells = <2>;

arch/riscv/boot/dts/starfive/jh7110-common.dtsi

@@ -128,7 +128,6 @@
 	assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>,
 			  <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>;
 	assigned-clock-rates = <49500000>, <198000000>;
-	status = "okay";
 
 	ports {
 		#address-cells = <1>;
@@ -151,7 +150,6 @@
 &csi2rx {
 	assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>;
 	assigned-clock-rates = <297000000>;
-	status = "okay";
 
 	ports {
 		#address-cells = <1>;

arch/riscv/boot/dts/starfive/jh7110-pine64-star64.dts

@@ -44,8 +44,7 @@
 };
 
 &phy0 {
-	rx-internal-delay-ps = <1900>;
-	tx-internal-delay-ps = <1500>;
+	rx-internal-delay-ps = <1500>;
 	motorcomm,rx-clk-drv-microamp = <2910>;
 	motorcomm,rx-data-drv-microamp = <2910>;
 	motorcomm,tx-clk-adj-enabled;

arch/s390/Kconfig

@@ -276,6 +276,9 @@ config ARCH_SUPPORTS_CRASH_DUMP
 	  This option also enables s390 zfcpdump.
 	  See also <file:Documentation/arch/s390/zfcpdump.rst>
 
+config ARCH_DEFAULT_CRASH_DUMP
+	def_bool y
+
 menu "Processor type and features"
 
 config HAVE_MARCH_Z10_FEATURES

arch/sh/Kconfig

@@ -550,6 +550,9 @@ config ARCH_SUPPORTS_KEXEC
 config ARCH_SUPPORTS_CRASH_DUMP
 	def_bool BROKEN_ON_SMP
 
+config ARCH_DEFAULT_CRASH_DUMP
+	def_bool y
+
 config ARCH_SUPPORTS_KEXEC_JUMP
 	def_bool y
 

arch/x86/Kconfig

@@ -2084,6 +2084,9 @@ config ARCH_SUPPORTS_KEXEC_JUMP
 config ARCH_SUPPORTS_CRASH_DUMP
 	def_bool X86_64 || (X86_32 && HIGHMEM)
 
+config ARCH_DEFAULT_CRASH_DUMP
+	def_bool y
+
 config ARCH_SUPPORTS_CRASH_HOTPLUG
 	def_bool y
 

arch/x86/Makefile

@@ -142,9 +142,10 @@ ifeq ($(CONFIG_X86_32),y)
 
     ifeq ($(CONFIG_STACKPROTECTOR),y)
         ifeq ($(CONFIG_SMP),y)
-			KBUILD_CFLAGS += -mstack-protector-guard-reg=fs -mstack-protector-guard-symbol=__stack_chk_guard
+            KBUILD_CFLAGS += -mstack-protector-guard-reg=fs \
+                             -mstack-protector-guard-symbol=__ref_stack_chk_guard
         else
-			KBUILD_CFLAGS += -mstack-protector-guard=global
+            KBUILD_CFLAGS += -mstack-protector-guard=global
         endif
     endif
 else

arch/x86/entry/entry.S

@@ -51,3 +51,19 @@ EXPORT_SYMBOL_GPL(mds_verw_sel);
 .popsection
 
 THUNK warn_thunk_thunk, __warn_thunk
+
+#ifndef CONFIG_X86_64
+/*
+ * Clang's implementation of TLS stack cookies requires the variable in
+ * question to be a TLS variable. If the variable happens to be defined as an
+ * ordinary variable with external linkage in the same compilation unit (which
+ * amounts to the whole of vmlinux with LTO enabled), Clang will drop the
+ * segment register prefix from the references, resulting in broken code. Work
+ * around this by avoiding the symbol used in -mstack-protector-guard-symbol=
+ * entirely in the C code, and use an alias emitted by the linker script
+ * instead.
+ */
+#ifdef CONFIG_STACKPROTECTOR
+EXPORT_SYMBOL(__ref_stack_chk_guard);
+#endif
+#endif

arch/x86/include/asm/asm-prototypes.h

@@ -20,3 +20,6 @@
 extern void cmpxchg8b_emu(void);
 #endif
 
+#if defined(__GENKSYMS__) && defined(CONFIG_STACKPROTECTOR)
+extern unsigned long __ref_stack_chk_guard;
+#endif

arch/x86/include/asm/topology.h

@@ -305,9 +305,4 @@ static inline void freq_invariance_set_perf_ratio(u64 ratio, bool turbo_disabled
 extern void arch_scale_freq_tick(void);
 #define arch_scale_freq_tick arch_scale_freq_tick
 
-#ifdef CONFIG_ACPI_CPPC_LIB
-void init_freq_invariance_cppc(void);
-#define arch_init_invariance_cppc init_freq_invariance_cppc
-#endif
-
 #endif /* _ASM_X86_TOPOLOGY_H */

arch/x86/kernel/acpi/cppc.c

@@ -110,7 +110,7 @@ static void amd_set_max_freq_ratio(void)
 
 static DEFINE_MUTEX(freq_invariance_lock);
 
-void init_freq_invariance_cppc(void)
+static inline void init_freq_invariance_cppc(void)
 {
 	static bool init_done;
 
@@ -127,6 +127,11 @@ void init_freq_invariance_cppc(void)
 	mutex_unlock(&freq_invariance_lock);
 }
 
+void acpi_processor_init_invariance_cppc(void)
+{
+	init_freq_invariance_cppc();
+}
+
 /*
  * Get the highest performance register value.
  * @cpu: CPU from which to get highest performance.

arch/x86/kernel/cpu/amd.c

@@ -924,6 +924,17 @@ static void init_amd_zen4(struct cpuinfo_x86 *c)
 {
 	if (!cpu_has(c, X86_FEATURE_HYPERVISOR))
 		msr_set_bit(MSR_ZEN4_BP_CFG, MSR_ZEN4_BP_CFG_SHARED_BTB_FIX_BIT);
+
+	/*
+	 * These Zen4 SoCs advertise support for virtualized VMLOAD/VMSAVE
+	 * in some BIOS versions but they can lead to random host reboots.
+	 */
+	switch (c->x86_model) {
+	case 0x18 ... 0x1f:
+	case 0x60 ... 0x7f:
+		clear_cpu_cap(c, X86_FEATURE_V_VMSAVE_VMLOAD);
+		break;
+	}
 }
 
 static void init_amd_zen5(struct cpuinfo_x86 *c)

arch/x86/kernel/cpu/common.c

@@ -2089,8 +2089,10 @@ void syscall_init(void)
 
 #ifdef CONFIG_STACKPROTECTOR
 DEFINE_PER_CPU(unsigned long, __stack_chk_guard);
+#ifndef CONFIG_SMP
 EXPORT_PER_CPU_SYMBOL(__stack_chk_guard);
 #endif
+#endif
 
 #endif	/* CONFIG_X86_64 */
 

arch/x86/kernel/vmlinux.lds.S

@@ -491,6 +491,9 @@ SECTIONS
 . = ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
 	   "kernel image bigger than KERNEL_IMAGE_SIZE");
 
+/* needed for Clang - see arch/x86/entry/entry.S */
+PROVIDE(__ref_stack_chk_guard = __stack_chk_guard);
+
 #ifdef CONFIG_X86_64
 /*
  * Per-cpu symbols which need to be offset from __per_cpu_load

arch/x86/kvm/lapic.c

@@ -2629,19 +2629,26 @@ void kvm_apic_update_apicv(struct kvm_vcpu *vcpu)
 {
 	struct kvm_lapic *apic = vcpu->arch.apic;
 
-	if (apic->apicv_active) {
-		/* irr_pending is always true when apicv is activated. */
-		apic->irr_pending = true;
+	/*
+	 * When APICv is enabled, KVM must always search the IRR for a pending
+	 * IRQ, as other vCPUs and devices can set IRR bits even if the vCPU
+	 * isn't running.  If APICv is disabled, KVM _should_ search the IRR
+	 * for a pending IRQ.  But KVM currently doesn't ensure *all* hardware,
+	 * e.g. CPUs and IOMMUs, has seen the change in state, i.e. searching
+	 * the IRR at this time could race with IRQ delivery from hardware that
+	 * still sees APICv as being enabled.
+	 *
+	 * FIXME: Ensure other vCPUs and devices observe the change in APICv
+	 *        state prior to updating KVM's metadata caches, so that KVM
+	 *        can safely search the IRR and set irr_pending accordingly.
+	 */
+	apic->irr_pending = true;
+
+	if (apic->apicv_active)
 		apic->isr_count = 1;
-	} else {
-		/*
-		 * Don't clear irr_pending, searching the IRR can race with
-		 * updates from the CPU as APICv is still active from hardware's
-		 * perspective.  The flag will be cleared as appropriate when
-		 * KVM injects the interrupt.
-		 */
+	else
 		apic->isr_count = count_vectors(apic->regs + APIC_ISR);
-	}
+
 	apic->highest_isr_cache = -1;
 }
 

arch/x86/kvm/svm/sev.c

@@ -450,8 +450,11 @@ static int __sev_guest_init(struct kvm *kvm, struct kvm_sev_cmd *argp,
 		goto e_free;
 
 	/* This needs to happen after SEV/SNP firmware initialization. */
-	if (vm_type == KVM_X86_SNP_VM && snp_guest_req_init(kvm))
-		goto e_free;
+	if (vm_type == KVM_X86_SNP_VM) {
+		ret = snp_guest_req_init(kvm);
+		if (ret)
+			goto e_free;
+	}
 
 	INIT_LIST_HEAD(&sev->regions_list);
 	INIT_LIST_HEAD(&sev->mirror_vms);
@@ -2212,10 +2215,6 @@ static int snp_launch_start(struct kvm *kvm, struct kvm_sev_cmd *argp)
 	if (sev->snp_context)
 		return -EINVAL;
 
-	sev->snp_context = snp_context_create(kvm, argp);
-	if (!sev->snp_context)
-		return -ENOTTY;
-
 	if (params.flags)
 		return -EINVAL;
 
@@ -2230,6 +2229,10 @@ static int snp_launch_start(struct kvm *kvm, struct kvm_sev_cmd *argp)
 	if (params.policy & SNP_POLICY_MASK_SINGLE_SOCKET)
 		return -EINVAL;
 
+	sev->snp_context = snp_context_create(kvm, argp);
+	if (!sev->snp_context)
+		return -ENOTTY;
+
 	start.gctx_paddr = __psp_pa(sev->snp_context);
 	start.policy = params.policy;
 	memcpy(start.gosvw, params.gosvw, sizeof(params.gosvw));