Pull iommu fix from Joerg Roedel:
- Fix device mask to catch all affected devices in the recently added
quirk for QAT devices in the Intel VT-d driver.
* tag 'iommu-fix-v6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Fix buggy QAT device mask
Pull misc fixes from Andrew Morton:
"Nine hotfixes.
Six for MM, three for other areas. Four of these patches address
post-6.0 issues"
* tag 'mm-hotfixes-stable-2022-12-10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
memcg: fix possible use-after-free in memcg_write_event_control()
MAINTAINERS: update Muchun Song's email
mm/gup: fix gup_pud_range() for dax
mmap: fix do_brk_flags() modifying obviously incorrect VMAs
mm/swap: fix SWP_PFN_BITS with CONFIG_PHYS_ADDR_T_64BIT on 32bit
tmpfs: fix data loss from failed fallocate
kselftests: cgroup: update kmem test precision tolerance
mm: do not BUG_ON missing brk mapping, because userspace can unmap it
mailmap: update Matti Vaittinen's email address
Pull ARM fix from Russell King:
"One further ARM fix for 6.1 from Wang Kefeng, fixing up the handling
for kfence faults"
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9278/1: kfence: only handle translation faults
memcg_write_event_control() accesses the dentry->d_name of the specified
control fd to route the write call. As a cgroup interface file can't be
renamed, it's safe to access d_name as long as the specified file is a
regular cgroup file. Also, as these cgroup interface files can't be
removed before the directory, it's safe to access the parent too.
Prior to 347c4a8747 ("memcg: remove cgroup_event->cft"), there was a
call to __file_cft() which verified that the specified file is a regular
cgroupfs file before further accesses. The cftype pointer returned from
__file_cft() was no longer necessary and the commit inadvertently dropped
the file type check with it allowing any file to slip through. With the
invarients broken, the d_name and parent accesses can now race against
renames and removals of arbitrary files and cause use-after-free's.
Fix the bug by resurrecting the file type check in __file_cft(). Now that
cgroupfs is implemented through kernfs, checking the file operations needs
to go through a layer of indirection. Instead, let's check the superblock
and dentry type.
Link: https://lkml.kernel.org/r/Y5FRm/cfcKPGzWwl@slm.duckdns.org
Fixes: 347c4a8747 ("memcg: remove cgroup_event->cft")
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Jann Horn <jannh@google.com>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: <stable@vger.kernel.org> [3.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We use "unsigned long" to store a PFN in the kernel and phys_addr_t to
store a physical address.
On a 64bit system, both are 64bit wide. However, on a 32bit system, the
latter might be 64bit wide. This is, for example, the case on x86 with
PAE: phys_addr_t and PTEs are 64bit wide, while "unsigned long" only spans
32bit.
The current definition of SWP_PFN_BITS without MAX_PHYSMEM_BITS misses
that case, and assumes that the maximum PFN is limited by an 32bit
phys_addr_t. This implies, that SWP_PFN_BITS will currently only be able
to cover 4 GiB - 1 on any 32bit system with 4k page size, which is wrong.
Let's rely on the number of bits in phys_addr_t instead, but make sure to
not exceed the maximum swap offset, to not make the BUILD_BUG_ON() in
is_pfn_swap_entry() unhappy. Note that swp_entry_t is effectively an
unsigned long and the maximum swap offset shares that value with the swap
type.
For example, on an 8 GiB x86 PAE system with a kernel config based on
Debian 11.5 (-> CONFIG_FLATMEM=y, CONFIG_X86_PAE=y), we will currently
fail removing migration entries (remove_migration_ptes()), because
mm/page_vma_mapped.c:check_pte() will fail to identify a PFN match as
swp_offset_pfn() wrongly masks off PFN bits. For example,
split_huge_page_to_list()->...->remap_page() will leave migration entries
in place and continue to unlock the page.
Later, when we stumble over these migration entries (e.g., via
/proc/self/pagemap), pfn_swap_entry_to_page() will BUG_ON() because these
migration entries shouldn't exist anymore and the page was unlocked.
[ 33.067591] kernel BUG at include/linux/swapops.h:497!
[ 33.067597] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
[ 33.067602] CPU: 3 PID: 742 Comm: cow Tainted: G E 6.1.0-rc8+ #16
[ 33.067605] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
[ 33.067606] EIP: pagemap_pmd_range+0x644/0x650
[ 33.067612] Code: 00 00 00 00 66 90 89 ce b9 00 f0 ff ff e9 ff fb ff ff 89 d8 31 db e8 48 c6 52 00 e9 23 fb ff ff e8 61 83 56 00 e9 b6 fe ff ff <0f> 0b bf 00 f0 ff ff e9 38 fa ff ff 3e 8d 74 26 00 55 89 e5 57 31
[ 33.067615] EAX: ee394000 EBX: 00000002 ECX: ee394000 EDX: 00000000
[ 33.067617] ESI: c1b0ded4 EDI: 00024a00 EBP: c1b0ddb4 ESP: c1b0dd68
[ 33.067619] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 EFLAGS: 00010246
[ 33.067624] CR0: 80050033 CR2: b7a00000 CR3: 01bbbd20 CR4: 00350ef0
[ 33.067625] Call Trace:
[ 33.067628] ? madvise_free_pte_range+0x720/0x720
[ 33.067632] ? smaps_pte_range+0x4b0/0x4b0
[ 33.067634] walk_pgd_range+0x325/0x720
[ 33.067637] ? mt_find+0x1d6/0x3a0
[ 33.067641] ? mt_find+0x1d6/0x3a0
[ 33.067643] __walk_page_range+0x164/0x170
[ 33.067646] walk_page_range+0xf9/0x170
[ 33.067648] ? __kmem_cache_alloc_node+0x2a8/0x340
[ 33.067653] pagemap_read+0x124/0x280
[ 33.067658] ? default_llseek+0x101/0x160
[ 33.067662] ? smaps_account+0x1d0/0x1d0
[ 33.067664] vfs_read+0x90/0x290
[ 33.067667] ? do_madvise.part.0+0x24b/0x390
[ 33.067669] ? debug_smp_processor_id+0x12/0x20
[ 33.067673] ksys_pread64+0x58/0x90
[ 33.067675] __ia32_sys_ia32_pread64+0x1b/0x20
[ 33.067680] __do_fast_syscall_32+0x4c/0xc0
[ 33.067683] do_fast_syscall_32+0x29/0x60
[ 33.067686] do_SYSENTER_32+0x15/0x20
[ 33.067689] entry_SYSENTER_32+0x98/0xf1
Decrease the indentation level of SWP_PFN_BITS and SWP_PFN_MASK to keep it
readable and consistent.
[david@redhat.com: rely on sizeof(phys_addr_t) and min_t() instead]
Link: https://lkml.kernel.org/r/20221206105737.69478-1-david@redhat.com
[david@redhat.com: use "int" for comparison, as we're only comparing numbers < 64]
Link: https://lkml.kernel.org/r/1f157500-2676-7cef-a84e-9224ed64e540@redhat.com
Link: https://lkml.kernel.org/r/20221205150857.167583-1-david@redhat.com
Fixes: 0d206b5d2e ("mm/swap: add swp_offset_pfn() to fetch PFN from swap entry")
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull media fix from Mauro Carvalho Chehab:
"A v4l-core fix related to validating DV timings related to video
blanking values"
* tag 'media/v6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: v4l2-dv-timings.c: fix too strict blanking sanity checks
Pull ARM SoC fix from Arnd Bergmann:
"One more last minute revert for a boot regression that was found on
the popular colibri-imx7"
* tag 'soc-fixes-6.1-6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
Revert "ARM: dts: imx7: Fix NAND controller size-cells"
Pull drm fixes from Dave Airlie:
"Last set of fixes for final, scattered bunch of fixes, two amdgpu, one
vmwgfx, and some misc others.
amdgpu:
- S0ix fix
- DCN 3.2 array out of bounds fix
shmem:
- Fixes to shmem-helper error paths
bridge:
- Fix polarity bug in bridge/ti-sn65dsi86
dw-hdmi:
- Prefer 8-bit RGB fallback before any YUV mode in dw-hdmi, since
some panels lie about YUV support
vmwgfx:
- Stop using screen objects when SEV is active"
* tag 'drm-fixes-2022-12-09' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: fix array index out of bound error in DCN32 DML
drm/amdgpu/sdma_v4_0: turn off SDMA ring buffer in the s2idle suspend
drm/vmwgfx: Don't use screen objects when SEV is active
drm/shmem-helper: Avoid vm_open error paths
drm/shmem-helper: Remove errant put in error path
drm: bridge: dw_hdmi: fix preference of RGB modes over YUV420
drm/bridge: ti-sn65dsi86: Fix output polarity setting bug
drm/vmwgfx: Fix race issue calling pin_user_pages
Pull block fix from Jens Axboe:
"A small fix for initializing the NVMe quirks before initializing the
subsystem"
* tag 'block-6.1-2022-12-08' of git://git.kernel.dk/linux:
nvme initialize core quirks before calling nvme_init_subsystem
Pull io_uring fix from Jens Axboe:
"A single small fix for an issue related to ordering between
cancelation and current->io_uring teardown"
* tag 'io_uring-6.1-2022-12-08' of git://git.kernel.dk/linux:
io_uring: Fix a null-ptr-deref in io_tctx_exit_cb()
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, can and netfilter.
Current release - new code bugs:
- bonding: ipv6: correct address used in Neighbour Advertisement
parsing (src vs dst typo)
- fec: properly scope IRQ coalesce setup during link up to supported
chips only
Previous releases - regressions:
- Bluetooth fixes for fake CSR clones (knockoffs):
- re-add ERR_DATA_REPORTING quirk
- fix crash when device is replugged
- Bluetooth:
- silence a user-triggerable dmesg error message
- L2CAP: fix u8 overflow, oob access
- correct vendor codec definition
- fix support for Read Local Supported Codecs V2
- ti: am65-cpsw: fix RGMII configuration at SPEED_10
- mana: fix race on per-CQ variable NAPI work_done
Previous releases - always broken:
- af_unix: diag: fetch user_ns from in_skb in unix_diag_get_exact(),
avoid null-deref
- af_can: fix NULL pointer dereference in can_rcv_filter
- can: slcan: fix UAF with a freed work
- can: can327: flush TX_work on ldisc .close()
- macsec: add missing attribute validation for offload
- ipv6: avoid use-after-free in ip6_fragment()
- nft_set_pipapo: actually validate intervals in fields after the
first one
- mvneta: prevent oob access in mvneta_config_rss()
- ipv4: fix incorrect route flushing when table ID 0 is used, or when
source address is deleted
- phy: mxl-gpy: add workaround for IRQ bug on GPY215B and GPY215C"
* tag 'net-6.1-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (77 commits)
net: dsa: sja1105: avoid out of bounds access in sja1105_init_l2_policing()
s390/qeth: fix use-after-free in hsci
macsec: add missing attribute validation for offload
net: mvneta: Fix an out of bounds check
net: thunderbolt: fix memory leak in tbnet_open()
ipv6: avoid use-after-free in ip6_fragment()
net: plip: don't call kfree_skb/dev_kfree_skb() under spin_lock_irq()
net: phy: mxl-gpy: add MDINT workaround
net: dsa: mv88e6xxx: accept phy-mode = "internal" for internal PHY ports
xen/netback: don't call kfree_skb() under spin_lock_irqsave()
dpaa2-switch: Fix memory leak in dpaa2_switch_acl_entry_add() and dpaa2_switch_acl_entry_remove()
ethernet: aeroflex: fix potential skb leak in greth_init_rings()
tipc: call tipc_lxc_xmit without holding node_read_lock
can: esd_usb: Allow REC and TEC to return to zero
can: can327: flush TX_work on ldisc .close()
can: slcan: fix freed work crash
can: af_can: fix NULL pointer dereference in can_rcv_filter
net: dsa: sja1105: fix memory leak in sja1105_setup_devlink_regions()
ipv4: Fix incorrect route flushing when table ID 0 is used
ipv4: Fix incorrect route flushing when source address is deleted
...
Pull HID fixes from Jiri Kosina:
"A regression fix for handling Logitech HID++ devices and memory
corruption fixes:
- regression fix (revert) for catch-all handling of Logitech HID++
Bluetooth devices; there are devices that turn out not to work with
this, and the root cause is yet to be properly understood. So we
are dropping it for now, and it will be revisited for 6.2 or 6.3
(Benjamin Tissoires)
- memory corruption fix in HID core (ZhangPeng)
- memory corruption fix in hid-lg4ff (Anastasia Belova)
- Kconfig fix for I2C_HID (Benjamin Tissoires)
- a few device-id specific quirks that piggy-back on top of the
important fixes above"
* tag 'for-linus-2022120801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
Revert "HID: logitech-hidpp: Enable HID++ for all the Logitech Bluetooth devices"
Revert "HID: logitech-hidpp: Remove special-casing of Bluetooth devices"
HID: usbhid: Add ALWAYS_POLL quirk for some mice
HID: core: fix shift-out-of-bounds in hid_report_raw_event
HID: uclogic: Add HID_QUIRK_HIDINPUT_FORCE quirk
HID: fix I2C_HID not selected when I2C_HID_OF_ELAN is
HID: hid-lg4ff: Add check for empty lbuf
HID: ite: Enable QUIRK_TOUCHPAD_ON_OFF_REPORT on Acer Aspire Switch V 10
HID: uclogic: Fix frame templates for big endian architectures
Pull ARM SoC fix from Arnd Bergmann:
"One last build fix came in, addressing a link failure when building
without CONFIG_OUTER_CACHE"
* tag 'soc-fixes-6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: at91: fix build for SAMA5D3 w/o L2 cache
This reverts commit 532223c8ac.
As reported in [0], hid-logitech-hidpp now binds on all bluetooth mice,
but there are corner cases where hid-logitech-hidpp just gives up on
the mouse. This leads the end user with a dead mouse.
Given that we are at -rc8, we are definitively too late to find a proper
fix. We already identified 2 issues less than 24 hours after the bug
report. One in that ->match() was never designed to be used anywhere else
than in hid-generic, and the other that hid-logitech-hidpp has corner
cases where it gives up on devices it is not supposed to.
So we have no choice but postpone this patch to the next kernel release.
[0] https://lore.kernel.org/linux-input/CAJZ5v0g-_o4AqMgNwihCb0jrwrcJZfRrX=jv8aH54WNKO7QB8A@mail.gmail.com/
Reported-by: Rafael J . Wysocki <rjw@rjwysocki.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This reverts commit 8544c812e4.
We need to revert commit 532223c8ac ("HID: logitech-hidpp: Enable HID++
for all the Logitech Bluetooth devices") because that commit might make
hid-logitech-hidpp bind on mice that are not well enough supported by
hid-logitech-hidpp, and the end result is that the probe of those mice
is now returning -ENODEV, leaving the end user with a dead mouse.
Given that commit 8544c812e4 ("HID: logitech-hidpp: Remove special-casing
of Bluetooth devices") is a direct dependency of 532223c8ac, revert it
too.
Note that this also adapt according to commit 908d325e16 ("HID:
logitech-hidpp: Detect hi-res scrolling support") to re-add support of
the devices that were removed from that commit too.
I have locally an MX Master and I tested this device with that revert,
ensuring we still have high-res scrolling.
Reported-by: Rafael J . Wysocki <rjw@rjwysocki.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull LoongArch fixes from Huacai Chen:
"Export smp_send_reschedule() for modules use, fix a huge page entry
update issue, and add documents for booting description"
* tag 'loongarch-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
docs/zh_CN: Add LoongArch booting description's translation
docs/LoongArch: Add booting description
LoongArch: mm: Fix huge page entry update for virtual machine
LoongArch: Export symbol for function smp_send_reschedule()
Pull xen fix from Juergen Gross:
"A single fix for the recent security issue XSA-423"
* tag 'for-linus-xsa-6.1-rc9b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/netback: fix build warning
Pull ATA fix from Damien Le Moal:
- Avoid a NULL pointer dereference in the libahci platform code that
can happen on initialization when a device tree does not specify
names for the adapter clocks (from Anders)
* tag 'ata-6.1-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libahci_platform: ahci_platform_find_clk: oops, NULL pointer
memcg_write_event_control() accesses the dentry->d_name of the specified
control fd to route the write call. As a cgroup interface file can't be
renamed, it's safe to access d_name as long as the specified file is a
regular cgroup file. Also, as these cgroup interface files can't be
removed before the directory, it's safe to access the parent too.
Prior to 347c4a8747 ("memcg: remove cgroup_event->cft"), there was a
call to __file_cft() which verified that the specified file is a regular
cgroupfs file before further accesses. The cftype pointer returned from
__file_cft() was no longer necessary and the commit inadvertently
dropped the file type check with it allowing any file to slip through.
With the invarients broken, the d_name and parent accesses can now race
against renames and removals of arbitrary files and cause
use-after-free's.
Fix the bug by resurrecting the file type check in __file_cft(). Now
that cgroupfs is implemented through kernfs, checking the file
operations needs to go through a layer of indirection. Instead, let's
check the superblock and dentry type.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 347c4a8747 ("memcg: remove cgroup_event->cft")
Cc: stable@kernel.org # v3.14+
Reported-by: Jann Horn <jannh@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The SJA1105 family has 45 L2 policing table entries
(SJA1105_MAX_L2_POLICING_COUNT) and SJA1110 has 110
(SJA1110_MAX_L2_POLICING_COUNT). Keeping the table structure but
accounting for the difference in port count (5 in SJA1105 vs 10 in
SJA1110) does not fully explain the difference. Rather, the SJA1110 also
has L2 ingress policers for multicast traffic. If a packet is classified
as multicast, it will be processed by the policer index 99 + SRCPORT.
The sja1105_init_l2_policing() function initializes all L2 policers such
that they don't interfere with normal packet reception by default. To have
a common code between SJA1105 and SJA1110, the index of the multicast
policer for the port is calculated because it's an index that is out of
bounds for SJA1105 but in bounds for SJA1110, and a bounds check is
performed.
The code fails to do the proper thing when determining what to do with the
multicast policer of port 0 on SJA1105 (ds->num_ports = 5). The "mcast"
index will be equal to 45, which is also equal to
table->ops->max_entry_count (SJA1105_MAX_L2_POLICING_COUNT). So it passes
through the check. But at the same time, SJA1105 doesn't have multicast
policers. So the code programs the SHARINDX field of an out-of-bounds
element in the L2 Policing table of the static config.
The comparison between index 45 and 45 entries should have determined the
code to not access this policer index on SJA1105, since its memory wasn't
even allocated.
With enough bad luck, the out-of-bounds write could even overwrite other
valid kernel data, but in this case, the issue was detected using KASAN.
Kernel log:
sja1105 spi5.0: Probed switch chip: SJA1105Q
==================================================================
BUG: KASAN: slab-out-of-bounds in sja1105_setup+0x1cbc/0x2340
Write of size 8 at addr ffffff880bd57708 by task kworker/u8:0/8
...
Workqueue: events_unbound deferred_probe_work_func
Call trace:
...
sja1105_setup+0x1cbc/0x2340
dsa_register_switch+0x1284/0x18d0
sja1105_probe+0x748/0x840
...
Allocated by task 8:
...
sja1105_setup+0x1bcc/0x2340
dsa_register_switch+0x1284/0x18d0
sja1105_probe+0x748/0x840
...
Fixes: 38fbe91f22 ("net: dsa: sja1105: configure the multicast policers, if present")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Radu Nicolae Pirea (OSS) <radu-nicolae.pirea@oss.nxp.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20221207132347.38698-1-radu-nicolae.pirea@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In an earlier commit, I added a bounds check to prevent an out of bounds
read and a WARN(). On further discussion and consideration that check
was probably too aggressive. Instead of returning -EINVAL, a better fix
would be to just prevent the out of bounds read but continue the process.
Background: The value of "pp->rxq_def" is a number between 0-7 by default,
or even higher depending on the value of "rxq_number", which is a module
parameter. If the value is more than the number of available CPUs then
it will trigger the WARN() in cpu_max_bits_warn().
Fixes: e8b4fc1390 ("net: mvneta: Prevent out of bounds read in mvneta_config_rss()")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/Y5A7d1E5ccwHTYPf@kadam
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
1, Describe the information passed from BootLoader to kernel.
2, Describe the meaning and values of the kernel image header field.
Suggested-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
In virtual machine (guest mode), the tlbwr instruction can not write the
last entry of MTLB, so we need to make it non-present by invtlb and then
write it by tlbfill. This also simplify the whole logic.
Signed-off-by: Rui Wang <wangrui@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Function smp_send_reschedule() is standard kernel API, which is defined
in header file include/linux/smp.h. However, on LoongArch it is defined
as an inline function, this is confusing and kernel modules can not use
this function.
Now we define smp_send_reschedule() as a general function, and add a
EXPORT_SYMBOL_GPL on this function, so that kernel modules can use it.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
At least the GPY215B and GPY215C has a bug where it is still driving the
interrupt line (MDINT) even after the interrupt status register is read
and its bits are cleared. This will cause an interrupt storm.
Although the MDINT is multiplexed with a GPIO pin and theoretically we
could switch the pinmux to GPIO input mode, this isn't possible because
the access to this register will stall exactly as long as the interrupt
line is asserted. We exploit this very fact and just read a random
internal register in our interrupt handler. This way, it will be delayed
until the external interrupt line is released and an interrupt storm is
avoided.
The internal register access via the mailbox was deduced by looking at
the downstream PHY API because the datasheet doesn't mention any of
this.
Fixes: 7d901a1e87 ("net: phy: add Maxlinear GPY115/21x/24x driver")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221205200453.3447866-1-michael@walle.cc
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marc Kleine-Budde says:
====================
pull-request: can 2022-12-07
The 1st patch is by Oliver Hartkopp and fixes a potential NULL pointer
deref found by syzbot in the AF_CAN protocol.
The next 2 patches are by Jiri Slaby and Max Staudt and add the
missing flush_work() before freeing the underlying memory in the slcan
and can327 driver.
The last patch is by Frank Jungclaus and target the esd_usb driver and
fixes the CAN error counters, allowing them to return to zero.
* tag 'linux-can-fixes-for-6.1-20221207' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: esd_usb: Allow REC and TEC to return to zero
can: can327: flush TX_work on ldisc .close()
can: slcan: fix freed work crash
can: af_can: fix NULL pointer dereference in can_rcv_filter
====================
Link: https://lore.kernel.org/r/20221207105243.2483884-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull x86 platform driver fix from Hans de Goede:
"A single fix for 6.1 for suspend/resume issues on some AMD systems"
* tag 'platform-drivers-x86-v6.1-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/amd: pmc: Add a workaround for an s0i3 issue on Cezanne
If a cookie expires from the LRU and the LRU_DISCARD flag is set, but
the state machine has not run yet, it's possible another thread can call
fscache_use_cookie and begin to use it.
When the cookie_worker finally runs, it will see the LRU_DISCARD flag
set, transition the cookie->state to LRU_DISCARDING, which will then
withdraw the cookie. Once the cookie is withdrawn the object is removed
the below oops will occur because the object associated with the cookie
is now NULL.
Fix the oops by clearing the LRU_DISCARD bit if another thread uses the
cookie before the cookie_worker runs.
BUG: kernel NULL pointer dereference, address: 0000000000000008
...
CPU: 31 PID: 44773 Comm: kworker/u130:1 Tainted: G E 6.0.0-5.dneg.x86_64 #1
Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022
Workqueue: events_unbound netfs_rreq_write_to_cache_work [netfs]
RIP: 0010:cachefiles_prepare_write+0x28/0x90 [cachefiles]
...
Call Trace:
netfs_rreq_write_to_cache_work+0x11c/0x320 [netfs]
process_one_work+0x217/0x3e0
worker_thread+0x4a/0x3b0
kthread+0xd6/0x100
Fixes: 12bb21a29c ("fscache: Implement cookie user counting and resource pinning")
Reported-by: Daire Byrne <daire.byrne@gmail.com>
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Daire Byrne <daire@dneg.com>
Link: https://lore.kernel.org/r/20221117115023.1350181-1-dwysocha@redhat.com/ # v1
Link: https://lore.kernel.org/r/20221117142915.1366990-1-dwysocha@redhat.com/ # v2
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While vb2_mmap took the mmap_lock mutex, vb2_get_unmapped_area didn't.
Add this.
Also take this opportunity to move the 'q->memory != VB2_MEMORY_MMAP'
check and vb2_fileio_is_active() check into __find_plane_by_offset() so
both vb2_mmap and vb2_get_unmapped_area do the same checks.
Since q->memory is checked while mmap_lock is held, also take that lock
in reqbufs and create_bufs when it is set, and set it back to
MEMORY_UNKNOWN on error.
Fixes: f035eb4e97 ("[media] videobuf2: fix lockdep warning")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[Why&How]
LinkCapacitySupport array is indexed with the number of voltage states and
not the number of max DPPs. Fix the error by changing the array
declaration to use the correct (larger) array size of total number of
voltage states.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
Pull NVMe fix from Christoph:
"nvme fixes for Linux 6.1
- initialize core quirks before calling nvme_init_subsystem
(Pankaj Raghav)"
* tag 'nvme-6.1-2022-12-07' of git://git.infradead.org/nvme:
nvme initialize core quirks before calling nvme_init_subsystem
Commit ad7f402ae4 ("xen/netback: Ensure protocol headers don't fall in
the non-linear area") introduced a (valid) build warning. There have
even been reports of this problem breaking networking of Xen guests.
Fixes: ad7f402ae4 ("xen/netback: Ensure protocol headers don't fall in the non-linear area")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
This is a similar fixup like arm64 does, only handle translation faults
in case of unexpected kfence report when alignment faults on ARM, see
more from commit 0bb1fbffc6 ("arm64: mm: kfence: only handle translation
faults").
Fixes: 75969686ec ("ARM: 9166/1: Support KFENCE for ARM")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Syzkaller reports a NULL deref bug as follows:
BUG: KASAN: null-ptr-deref in io_tctx_exit_cb+0x53/0xd3
Read of size 4 at addr 0000000000000138 by task file1/1955
CPU: 1 PID: 1955 Comm: file1 Not tainted 6.1.0-rc7-00103-gef4d3ea40565 #75
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xcd/0x134
? io_tctx_exit_cb+0x53/0xd3
kasan_report+0xbb/0x1f0
? io_tctx_exit_cb+0x53/0xd3
kasan_check_range+0x140/0x190
io_tctx_exit_cb+0x53/0xd3
task_work_run+0x164/0x250
? task_work_cancel+0x30/0x30
get_signal+0x1c3/0x2440
? lock_downgrade+0x6e0/0x6e0
? lock_downgrade+0x6e0/0x6e0
? exit_signals+0x8b0/0x8b0
? do_raw_read_unlock+0x3b/0x70
? do_raw_spin_unlock+0x50/0x230
arch_do_signal_or_restart+0x82/0x2470
? kmem_cache_free+0x260/0x4b0
? putname+0xfe/0x140
? get_sigframe_size+0x10/0x10
? do_execveat_common.isra.0+0x226/0x710
? lockdep_hardirqs_on+0x79/0x100
? putname+0xfe/0x140
? do_execveat_common.isra.0+0x238/0x710
exit_to_user_mode_prepare+0x15f/0x250
syscall_exit_to_user_mode+0x19/0x50
do_syscall_64+0x42/0xb0
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0023:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
RSP: 002b:00000000fffb7790 EFLAGS: 00000200 ORIG_RAX: 000000000000000b
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Kernel panic - not syncing: panic_on_warn set ...
This happens because the adding of task_work from io_ring_exit_work()
isn't synchronized with canceling all work items from eg exec. The
execution of the two are ordered in that they are both run by the task
itself, but if io_tctx_exit_cb() is queued while we're canceling all
work items off exec AND gets executed when the task exits to userspace
rather than in the main loop in io_uring_cancel_generic(), then we can
find current->io_uring == NULL and hit the above crash.
It's safe to add this NULL check here, because the execution of the two
paths are done by the task itself.
Cc: stable@vger.kernel.org
Fixes: d56d938b4b ("io_uring: do ctx initiated file note removal")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://lore.kernel.org/r/20221206093833.3812138-1-harshit.m.mogalapalli@oracle.com
[axboe: add code comment and also put an explanation in the commit msg]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2022-12-05
An update from ieee802154 for your *net* tree:
Three small fixes this time around.
Ziyang Xuan fixed an error code for a timeout during initialization of the
cc2520 driver.
Hauke Mehrtens fixed a crash in the ca8210 driver SPI communication due
uninitialized SPI structures.
Wei Yongjun added INIT_LIST_HEAD ieee802154_if_add() to avoid a potential
null pointer dereference.
====================
Link: https://lore.kernel.org/r/20221205122515.1720539-1-stefan@datenfreihafen.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When sending packets between nodes in netns, it calls tipc_lxc_xmit() for
peer node to receive the packets where tipc_sk_mcast_rcv()/tipc_sk_rcv()
might be called, and it's pretty much like in tipc_rcv().
Currently the local 'node rw lock' is held during calling tipc_lxc_xmit()
to protect the peer_net not being freed by another thread. However, when
receiving these packets, tipc_node_add_conn() might be called where the
peer 'node rw lock' is acquired. Then a dead lock warning is triggered by
lockdep detector, although it is not a real dead lock:
WARNING: possible recursive locking detected
--------------------------------------------
conn_server/1086 is trying to acquire lock:
ffff8880065cb020 (&n->lock#2){++--}-{2:2}, \
at: tipc_node_add_conn.cold.76+0xaa/0x211 [tipc]
but task is already holding lock:
ffff8880065cd020 (&n->lock#2){++--}-{2:2}, \
at: tipc_node_xmit+0x285/0xb30 [tipc]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&n->lock#2);
lock(&n->lock#2);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by conn_server/1086:
#0: ffff8880036d1e40 (sk_lock-AF_TIPC){+.+.}-{0:0}, \
at: tipc_accept+0x9c0/0x10b0 [tipc]
#1: ffff8880036d5f80 (sk_lock-AF_TIPC/1){+.+.}-{0:0}, \
at: tipc_accept+0x363/0x10b0 [tipc]
#2: ffff8880065cd020 (&n->lock#2){++--}-{2:2}, \
at: tipc_node_xmit+0x285/0xb30 [tipc]
#3: ffff888012e13370 (slock-AF_TIPC){+...}-{2:2}, \
at: tipc_sk_rcv+0x2da/0x1b40 [tipc]
Call Trace:
<TASK>
dump_stack_lvl+0x44/0x5b
__lock_acquire.cold.77+0x1f2/0x3d7
lock_acquire+0x1d2/0x610
_raw_write_lock_bh+0x38/0x80
tipc_node_add_conn.cold.76+0xaa/0x211 [tipc]
tipc_sk_finish_conn+0x21e/0x640 [tipc]
tipc_sk_filter_rcv+0x147b/0x3030 [tipc]
tipc_sk_rcv+0xbb4/0x1b40 [tipc]
tipc_lxc_xmit+0x225/0x26b [tipc]
tipc_node_xmit.cold.82+0x4a/0x102 [tipc]
__tipc_sendstream+0x879/0xff0 [tipc]
tipc_accept+0x966/0x10b0 [tipc]
do_accept+0x37d/0x590
This patch avoids this warning by not holding the 'node rw lock' before
calling tipc_lxc_xmit(). As to protect the 'peer_net', rcu_read_lock()
should be enough, as in cleanup_net() when freeing the netns, it calls
synchronize_rcu() before the free is continued.
Also since tipc_lxc_xmit() is like the RX path in tipc_rcv(), it makes
sense to call it under rcu_read_lock(). Note that the right lock order
must be:
rcu_read_lock();
tipc_node_read_lock(n);
tipc_node_read_unlock(n);
tipc_lxc_xmit();
rcu_read_unlock();
instead of:
tipc_node_read_lock(n);
rcu_read_lock();
tipc_node_read_unlock(n);
tipc_lxc_xmit();
rcu_read_unlock();
and we have to call tipc_node_read_lock/unlock() twice in
tipc_node_xmit().
Fixes: f73b12812a ("tipc: improve throughput between nodes in netns")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/5bdd1f8fee9db695cfff4528a48c9b9d0523fb00.1670110641.git.lucien.xin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We don't get any further EVENT from an esd CAN USB device for changes
on REC or TEC while those counters converge to 0 (with ecc == 0). So
when handling the "Back to Error Active"-event force txerr = rxerr =
0, otherwise the berr-counters might stay on values like 95 forever.
Also, to make life easier during the ongoing development a
netdev_dbg() has been introduced to allow dumping error events send by
an esd CAN USB device.
Fixes: 96d8e90382 ("can: Add driver for esd CAN-USB/2 device")
Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu>
Link: https://lore.kernel.org/all/20221130202242.3998219-2-frank.jungclaus@esd.eu
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The LTP test pty03 is causing a crash in slcan:
BUG: kernel NULL pointer dereference, address: 0000000000000008
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 0 PID: 348 Comm: kworker/0:3 Not tainted 6.0.8-1-default #1 openSUSE Tumbleweed 9d20364b934f5aab0a9bdf84e8f45cfdfae39dab
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
Workqueue: 0x0 (events)
RIP: 0010:process_one_work (/home/rich/kernel/linux/kernel/workqueue.c:706 /home/rich/kernel/linux/kernel/workqueue.c:2185)
Code: 49 89 ff 41 56 41 55 41 54 55 53 48 89 f3 48 83 ec 10 48 8b 06 48 8b 6f 48 49 89 c4 45 30 e4 a8 04 b8 00 00 00 00 4c 0f 44 e0 <49> 8b 44 24 08 44 8b a8 00 01 00 00 41 83 e5 20 f6 45 10 04 75 0e
RSP: 0018:ffffaf7b40f47e98 EFLAGS: 00010046
RAX: 0000000000000000 RBX: ffff9d644e1b8b48 RCX: ffff9d649e439968
RDX: 00000000ffff8455 RSI: ffff9d644e1b8b48 RDI: ffff9d64764aa6c0
RBP: ffff9d649e4335c0 R08: 0000000000000c00 R09: ffff9d64764aa734
R10: 0000000000000007 R11: 0000000000000001 R12: 0000000000000000
R13: ffff9d649e4335e8 R14: ffff9d64490da780 R15: ffff9d64764aa6c0
FS: 0000000000000000(0000) GS:ffff9d649e400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 0000000036424000 CR4: 00000000000006f0
Call Trace:
<TASK>
worker_thread (/home/rich/kernel/linux/kernel/workqueue.c:2436)
kthread (/home/rich/kernel/linux/kernel/kthread.c:376)
ret_from_fork (/home/rich/kernel/linux/arch/x86/entry/entry_64.S:312)
Apparently, the slcan's tx_work is freed while being scheduled. While
slcan_netdev_close() (netdev side) calls flush_work(&sl->tx_work),
slcan_close() (tty side) does not. So when the netdev is never set UP,
but the tty is stuffed with bytes and forced to wakeup write, the work
is scheduled, but never flushed.
So add an additional flush_work() to slcan_close() to be sure the work
is flushed under all circumstances.
The Fixes commit below moved flush_work() from slcan_close() to
slcan_netdev_close(). What was the rationale behind it? Maybe we can
drop the one in slcan_netdev_close()?
I see the same pattern in can327. So it perhaps needs the very same fix.
Fixes: cfcb4465e9 ("can: slcan: remove legacy infrastructure")
Link: https://bugzilla.suse.com/show_bug.cgi?id=1205597
Reported-by: Richard Palethorpe <richard.palethorpe@suse.com>
Tested-by: Petr Vorel <petr.vorel@suse.com>
Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-can@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: Max Staudt <max@enpas.org>
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Reviewed-by: Max Staudt <max@enpas.org>
Link: https://lore.kernel.org/all/20221201073426.17328-1-jirislaby@kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-12-05 (i40e)
Michal clears XPS init flag on reset to allow for updated values to be
written.
Sylwester adds sleep to VF reset to resolve issue of VFs not getting
resources.
Przemyslaw rejects filters for raw IPv4 or IPv6 l4_4_bytes filters as they
are not supported.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: Disallow ip4 and ip6 l4_4_bytes
i40e: Fix for VF MAC address 0
i40e: Fix not setting default xps_cpus after reset
====================
Link: https://lore.kernel.org/r/20221205212523.3197565-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel says:
====================
ipv4: Two small fixes for bugs in IPv4 routing code.
A variation of the second bug was reported by an FRR 5.0 (released
06/18) user as this version was setting a table ID of 0 for the
default VRF, unlike iproute2 and newer FRR versions.
The first bug was discovered while fixing the second.
Both bugs are not regressions (never worked) and are not critical
in my opinion, so the fixes can be applied to net-next, if desired.
No regressions in other tests:
# ./fib_tests.sh
...
Tests passed: 191
Tests failed: 0
====================
Link: https://lore.kernel.org/r/20221204075045.3780097-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cited commit added the table ID to the FIB info structure, but did not
properly initialize it when table ID 0 is used. This can lead to a route
in the default VRF with a preferred source address not being flushed
when the address is deleted.
Consider the following example:
# ip address add dev dummy1 192.0.2.1/28
# ip address add dev dummy1 192.0.2.17/28
# ip route add 198.51.100.0/24 via 192.0.2.2 src 192.0.2.17 metric 100
# ip route add table 0 198.51.100.0/24 via 192.0.2.2 src 192.0.2.17 metric 200
# ip route show 198.51.100.0/24
198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 100
198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 200
Both routes are installed in the default VRF, but they are using two
different FIB info structures. One with a metric of 100 and table ID of
254 (main) and one with a metric of 200 and table ID of 0. Therefore,
when the preferred source address is deleted from the default VRF,
the second route is not flushed:
# ip address del dev dummy1 192.0.2.17/28
# ip route show 198.51.100.0/24
198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 200
Fix by storing a table ID of 254 instead of 0 in the route configuration
structure.
Add a test case that fails before the fix:
# ./fib_tests.sh -t ipv4_del_addr
IPv4 delete address route tests
Regular FIB info
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Identical FIB info with different table ID
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Table ID 0
TEST: Route removed in default VRF when source address deleted [FAIL]
Tests passed: 8
Tests failed: 1
And passes after:
# ./fib_tests.sh -t ipv4_del_addr
IPv4 delete address route tests
Regular FIB info
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Identical FIB info with different table ID
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Table ID 0
TEST: Route removed in default VRF when source address deleted [ OK ]
Tests passed: 9
Tests failed: 0
Fixes: 5a56a0b3a4 ("net: Don't delete routes in different VRFs")
Reported-by: Donald Sharp <sharpd@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cited commit added the table ID to the FIB info structure, but did not
prevent structures with different table IDs from being consolidated.
This can lead to routes being flushed from a VRF when an address is
deleted from a different VRF.
Fix by taking the table ID into account when looking for a matching FIB
info. This is already done for FIB info structures backed by a nexthop
object in fib_find_info_nh().
Add test cases that fail before the fix:
# ./fib_tests.sh -t ipv4_del_addr
IPv4 delete address route tests
Regular FIB info
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Identical FIB info with different table ID
TEST: Route removed from VRF when source address deleted [FAIL]
TEST: Route in default VRF not removed [ OK ]
RTNETLINK answers: File exists
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [FAIL]
Tests passed: 6
Tests failed: 2
And pass after:
# ./fib_tests.sh -t ipv4_del_addr
IPv4 delete address route tests
Regular FIB info
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Identical FIB info with different table ID
TEST: Route removed from VRF when source address deleted [ OK ]
TEST: Route in default VRF not removed [ OK ]
TEST: Route removed in default VRF when source address deleted [ OK ]
TEST: Route in VRF is not removed by address delete [ OK ]
Tests passed: 8
Tests failed: 0
Fixes: 5a56a0b3a4 ("net: Don't delete routes in different VRFs")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prior to the Fixes: commit, the initialization code went through the
same fec_enet_set_coalesce() function as used by ethtool, and that
function correctly checks whether the current variant has support for
irq coalescing.
Now that the initialization code instead calls fec_enet_itr_coal_set()
directly, that call needs to be guarded by a check for the
FEC_QUIRK_HAS_COALESCE bit.
Fixes: df727d4547 (net: fec: don't reset irq coalesce settings to defaults on "ip link up")
Reported-by: Greg Ungerer <gregungerer@westnet.com.au>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221205204604.869853-1-linux@rasmusvillemoes.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull arm64 fix from Catalin Marinas:
"Revert the dropping of the cache invalidation from the arm64
arch_dma_prep_coherent() as it caused a regression in the
qcom_q6v5_mss remoteproc driver.
The driver is already buggy but the original arm64 change made
the problem obvious. The change will be re-introduced once the
driver is fixed"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
Revert "arm64: dma: Drop cache invalidation from arch_dma_prep_coherent()"
Pull kvm fixes from Paolo Bonzini:
"Unless anything comes from the ARM side, this should be the last pull
request for this release - and it's mostly documentation:
- Document the interaction between KVM_CAP_HALT_POLL and halt_poll_ns
- s390: fix multi-epoch extension in nested guests
- x86: fix uninitialized variable on nested triple fault"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: Document the interaction between KVM_CAP_HALT_POLL and halt_poll_ns
KVM: Move halt-polling documentation into common directory
KVM: x86: fix uninitialized variable use on KVM_REQ_TRIPLE_FAULT
KVM: s390: vsie: Fix the initialization of the epoch extension (epdx) field
Pull xen fixes from Juergen Gross:
"Two zero-day fixes for the xen-netback driver (XSA-423 and XSA-424)"
* tag 'for-linus-xsa-6.1-rc9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/netback: don't call kfree_skb() with interrupts disabled
xen/netback: Ensure protocol headers don't fall in the non-linear area
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So remove kfree_skb()
from the spin_lock_irqsave() section and use the already existing
"drop" label in xenvif_start_xmit() for dropping the SKB. At the
same time replace the dev_kfree_skb() call there with a call of
dev_kfree_skb_any(), as xenvif_start_xmit() can be called with
disabled interrupts.
This is XSA-424 / CVE-2022-42328 / CVE-2022-42329.
Fixes: be81992f90 ("xen/netback: don't queue unlimited number of packages")
Reported-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
In some cases, the frontend may send a packet where the protocol headers
are spread across multiple slots. This would result in netback creating
an skb where the protocol headers spill over into the non-linear area.
Some drivers and NICs don't handle this properly resulting in an
interface reset or worse.
This issue was introduced by the removal of an unconditional skb pull in
the tx path to improve performance. Fix this without reintroducing the
pull by setting up grant copy ops for as many slots as needed to reach
the XEN_NETBACK_TX_COPY_LEN size. Adjust the rest of the code to handle
multiple copy operations per skb.
This is XSA-423 / CVE-2022-3643.
Fixes: 7e5d775395 ("xen-netback: remove unconditional __pskb_pull_tail() in guest Tx path")
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
There is warning report about of_node refcount leak
while probing mdio device:
OF: ERROR: memory leak, expected refcount 1 instead of 2,
of_node_get()/of_node_put() unbalanced - destroy cset entry:
attach overlay node /spi/soc@0/mdio@710700c0/ethernet@4
In of_mdiobus_register_device(), we increase fwnode refcount
by fwnode_handle_get() before associating the of_node with
mdio device, but it has never been decreased in normal path.
Since that, in mdio_device_release(), it needs to call
fwnode_handle_put() in addition instead of calling kfree()
directly.
After above, just calling mdio_device_free() in the error handle
path of of_mdiobus_register_device() is enough to keep the
refcount balanced.
Fixes: a9049e0c51 ("mdio: Add support for mdio drivers.")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20221203073441.3885317-1-zengheng4@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Although the type I ERSPAN is based on the barebones IP + GRE
encapsulation and no extra ERSPAN header. Report erspan version on GRE
interface looks unreasonable. Fix this by separating the erspan and gre
fill info.
IPv6 GRE does not have this info as IPv6 only supports erspan version
1 and 2.
Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: f989d546a2 ("erspan: Add type I version 0 support.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: William Tu <u9012063@gmail.com>
Link: https://lore.kernel.org/r/20221203032858.3130339-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
After calling napi_complete_done(), the NAPIF_STATE_SCHED bit may be
cleared, and another CPU can start napi thread and access per-CQ variable,
cq->work_done. If the other thread (for example, from busy_poll) sets
it to a value >= budget, this thread will continue to run when it should
stop, and cause memory corruption and panic.
To fix this issue, save the per-CQ work_done variable in a local variable
before napi_complete_done(), so it won't be corrupted by a possible
concurrent thread after napi_complete_done().
Also, add a flag bit to advertise to the NIC firmware: the NAPI work_done
variable race is fixed, so the driver is able to reliably support features
like busy_poll.
Cc: stable@vger.kernel.org
Fixes: e1b5683ff6 ("net: mana: Move NAPI from EQ to CQ")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/1670010190-28595-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In dt-binding snps,dwmac.yaml, some properties under "snps,axi-config"
node are named without "axi_" prefix, but the driver expects the
prefix. Since the dt-binding has been there for a long time, we'd
better make driver match the binding for compatibility.
Fixes: afea03656a ("stmmac: rework DMA bus setting and introduce new platform AXI structure")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://lore.kernel.org/r/20221202161739.2203-1-jszhang@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The node returned by of_get_parent() with refcount incremented,
of_node_put() needs be called when finish using it. So add it in the
end of of_pinctrl_get().
Fixes: 936ee2675e ("gpio/rockchip: add driver for rockchip gpio")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
A device might have a core quirk for NVME_QUIRK_IGNORE_DEV_SUBNQN
(such as Samsung X5) but it would still give a:
"missing or invalid SUBNQN field"
warning as core quirks are filled after calling nvme_init_subnqn. Fill
ctrl->quirks from struct core_quirks before calling nvme_init_subsystem
to fix this.
Tested on a Samsung X5.
Fixes: ab9e00cc72 ("nvme: track subsystems")
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
proc_skip_spaces() seems to think it is working on C strings, and ends
up being just a wrapper around skip_spaces() with a really odd calling
convention.
Instead of basing it on skip_spaces(), it should have looked more like
proc_skip_char(), which really is the exact same function (except it
skips a particular character, rather than whitespace). So use that as
inspiration, odd coding and all.
Now the calling convention actually makes sense and works for the
intended purpose.
Reported-and-tested-by: Kyle Zeng <zengyhkyle@gmail.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
proc_get_long() is passed a size_t, but then assigns it to an 'int'
variable for the length. Let's not do that, even if our IO paths are
limited to MAX_RW_COUNT (exactly because of these kinds of type errors).
So do the proper test in the rigth type.
Reported-by: Kyle Zeng <zengyhkyle@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When SEV is enabled gmr's and mob's are explicitly disabled because
the encrypted system memory can not be used by the hypervisor.
The driver was disabling GMR's but the presentation code, which depends
on GMR's, wasn't honoring it which lead to black screen on hosts
with SEV enabled.
Make sure screen objects presentation is not used when guest memory
regions have been disabled to fix presentation on SEV enabled hosts.
Fixes: 3b0d6458c7 ("drm/vmwgfx: Refuse DMA operation when SEV encryption is active")
Cc: <stable@vger.kernel.org> # v5.7+
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reported-by: Nicholas Hunt <nhunt@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221201175341.491884-1-zack@kde.org
When __do_semtimedop() goes to sleep because it has to wait for a
semaphore value becoming zero or becoming bigger than some threshold, it
links the on-stack sem_queue to the sem_array, then goes to sleep
without holding a reference on the sem_array.
When __do_semtimedop() comes back out of sleep, one of two things must
happen:
a) We prove that the on-stack sem_queue has been disconnected from the
(possibly freed) sem_array, making it safe to return from the stack
frame that the sem_queue exists in.
b) We stabilize our reference to the sem_array, lock the sem_array, and
detach the sem_queue from the sem_array ourselves.
sem_array has RCU lifetime, so for case (b), the reference can be
stabilized inside an RCU read-side critical section by locklessly
checking whether the sem_queue is still connected to the sem_array.
However, the current code does the lockless check on sem_queue before
starting an RCU read-side critical section, so the result of the
lockless check immediately becomes useless.
Fix it by doing rcu_read_lock() before the lockless check. Now RCU
ensures that if we observe the object being on our queue, the object
can't be freed until rcu_read_unlock().
This bug is only hittable on kernel builds with full preemption support
(either CONFIG_PREEMPT or PREEMPT_DYNAMIC with preempt=full).
Fixes: 370b262c89 ("ipc/sem: avoid idr tree lookup for interrupted semop")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Return -EOPNOTSUPP, when user requests l4_4_bytes for raw IP4 or
IP6 flow director filters. Flow director does not support filtering
on l4 bytes for PCTYPEs used by IP4 and IP6 filters.
Without this patch, user could create filters with l4_4_bytes fields,
which did not do any filtering on L4, but only on L3 fields.
Fixes: 36777d9fa2 ("i40e: check current configured input set when adding ntuple filters")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
After spawning max VFs on a PF, some VFs were not getting resources and
their MAC addresses were 0. This was caused by PF sleeping before flushing
HW registers which caused VIRTCHNL_VFR_VFACTIVE to not be set in time for
VF.
Fix by adding a sleep after hw flush.
Fixes: e4b433f4a7 ("i40e: reset all VFs in parallel when rebuilding PF")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
During tx rings configuration default XPS queue config is set and
__I40E_TX_XPS_INIT_DONE is locked. __I40E_TX_XPS_INIT_DONE state is
cleared and set again with default mapping only during queues build,
it means after first setup or reset with queues rebuild. (i.e.
ethtool -L <interface> combined <number>) After other resets (i.e.
ethtool -t <interface>) XPS_INIT_DONE is not cleared and those default
maps cannot be set again. It results in cleared xps_cpus mapping
until queues are not rebuild or mapping is not set by user.
Add clearing __I40E_TX_XPS_INIT_DONE state during reset to let
the driver set xps_cpus to defaults again after it was cleared.
Fixes: 6f853d4f8e ("i40e: allow XPS with QoS enabled")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The pp->indir[0] value comes from the user. It is passed to:
if (cpu_online(pp->rxq_def))
inside the mvneta_percpu_elect() function. It needs bounds checkeding
to ensure that it is not beyond the end of the cpu bitmap.
Fixes: cad5d847a0 ("net: mvneta: Fix the CPU choice in mvneta_percpu_elect")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A NAPI is setup for each network sring to poll data to kernel
The sring with source host is destroyed before live migration and
new sring with target host is setup after live migration.
The NAPI for the old sring is not deleted until setup new sring
with target host after migration. With busy_poll/busy_read enabled,
the NAPI can be polled before got deleted when resume VM.
BUG: unable to handle kernel NULL pointer dereference at
0000000000000008
IP: xennet_poll+0xae/0xd20
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
Call Trace:
finish_task_switch+0x71/0x230
timerqueue_del+0x1d/0x40
hrtimer_try_to_cancel+0xb5/0x110
xennet_alloc_rx_buffers+0x2a0/0x2a0
napi_busy_loop+0xdb/0x270
sock_poll+0x87/0x90
do_sys_poll+0x26f/0x580
tracing_map_insert+0x1d4/0x2f0
event_hist_trigger+0x14a/0x260
finish_task_switch+0x71/0x230
__schedule+0x256/0x890
recalc_sigpending+0x1b/0x50
xen_sched_clock+0x15/0x20
__rb_reserve_next+0x12d/0x140
ring_buffer_lock_reserve+0x123/0x3d0
event_triggers_call+0x87/0xb0
trace_event_buffer_commit+0x1c4/0x210
xen_clocksource_get_cycles+0x15/0x20
ktime_get_ts64+0x51/0xf0
SyS_ppoll+0x160/0x1a0
SyS_ppoll+0x160/0x1a0
do_syscall_64+0x73/0x130
entry_SYSCALL_64_after_hwframe+0x41/0xa6
...
RIP: xennet_poll+0xae/0xd20 RSP: ffffb4f041933900
CR2: 0000000000000008
---[ end trace f8601785b354351c ]---
xen frontend should remove the NAPIs for the old srings before live
migration as the bond srings are destroyed
There is a tiny window between the srings are set to NULL and
the NAPIs are disabled, It is safe as the NAPI threads are still
frozen at that time
Signed-off-by: Lin Liu <lin.liu@citrix.com>
Fixes: 4ec2411980 ([NET]: Do not check netif_running() and carrier state in ->poll())
Signed-off-by: David S. Miller <davem@davemloft.net>
consume_skb on transmitted, kfree_skb on dropped, do not free on
TX_BUSY.
Previously the xmit function could return -EBUSY without freeing, which
supposedly is interpreted as a drop. And was using kfree on successfully
transmitted packets.
sparx5_fdma_xmit and sparx5_inject returns error code, where -EBUSY
indicates TX_BUSY and any other error code indicates dropped.
Fixes: f3cad2611a ("net: sparx5: add hostmode with phylink support")
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In otx2_init_tc(), if rhashtable_init() failed, it does not free
tc->tc_entries_bitmap which is allocated in otx2_tc_alloc_ent_bitmap().
Fixes: 2e2a8126ff ("octeontx2-pf: Unify flow management variables")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If phy_device_register() or fwnode_mdiobus_phy_device_register()
fail, phy_device_free() is called, the device refcount is decreased
to 0, then fwnode_handle_put() will be called in phy_device_release(),
but in the error path, fwnode_handle_put() has already been called,
so set fwnode to NULL after fwnode_handle_put() in the error path to
avoid double put.
Fixes: cdde156011 ("net: mdiobus: fix unbalanced node reference count")
Reported-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Zeng Heng <zengheng4@huawei.com>
Tested-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A loop for reading MISTAT register continues while regmap_read() fails
and (mistat & BUSY), but if regmap_read() fails a value of mistat is
undefined.
The patch proposes to check for BUSY flag only when regmap_read()
succeed. Compile test only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: d70e53262f ("net: Microchip encx24j600 driver")
Signed-off-by: Valentina Goncharenko <goncharenko.vp@ispras.ru>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In functions regmap_encx24j600_phy_reg_read() and
regmap_encx24j600_phy_reg_write() in the conditions of the waiting
cycles for filling the variable 'ret' it is necessary to add parentheses
to prevent wrong assignment due to logical operations precedence.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: d70e53262f ("net: Microchip encx24j600 driver")
Signed-off-by: Valentina Goncharenko <goncharenko.vp@ispras.ru>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kernel fault injection test reports null-ptr-deref as follows:
BUG: kernel NULL pointer dereference, address: 0000000000000008
RIP: 0010:cfg802154_netdev_notifier_call+0x120/0x310 include/linux/list.h:114
Call Trace:
<TASK>
raw_notifier_call_chain+0x6d/0xa0 kernel/notifier.c:87
call_netdevice_notifiers_info+0x6e/0xc0 net/core/dev.c:1944
unregister_netdevice_many_notify+0x60d/0xcb0 net/core/dev.c:1982
unregister_netdevice_queue+0x154/0x1a0 net/core/dev.c:10879
register_netdevice+0x9a8/0xb90 net/core/dev.c:10083
ieee802154_if_add+0x6ed/0x7e0 net/mac802154/iface.c:659
ieee802154_register_hw+0x29c/0x330 net/mac802154/main.c:229
mcr20a_probe+0xaaa/0xcb1 drivers/net/ieee802154/mcr20a.c:1316
ieee802154_if_add() allocates wpan_dev as netdev's private data, but not
init the list in struct wpan_dev. cfg802154_netdev_notifier_call() manage
the list when device register/unregister, and may lead to null-ptr-deref.
Use INIT_LIST_HEAD() on it to initialize it correctly.
Fixes: fcf39e6e88 ("ieee802154: add wpan_dev_list")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221130091705.1831140-1-weiyongjun@huaweicloud.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
vm_open() is not allowed to fail. Fortunately we are guaranteed that
the pages are already pinned, thanks to the initial mmap which is now
being cloned into a forked process, and only need to increment the
refcnt. So just increment it directly. Previously if a signal was
delivered at the wrong time to the forking process, the
mutex_lock_interruptible() could fail resulting in the pages_use_count
not being incremented.
Fixes: 2194a63a81 ("drm: Add library for shmem backed GEM objects")
Cc: stable@vger.kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221130185748.357410-3-robdclark@gmail.com
The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this using "grep -E" instead.
sed -i "s/egrep/grep -E/g" `grep egrep -rwl tools/testing/selftests/net`
Here are the steps to install the latest grep:
wget http://ftp.gnu.org/gnu/grep/grep-3.8.tar.gz
tar xf grep-3.8.tar.gz
cd grep-3.8 && ./configure && make
sudo make install
export PATH=/usr/local/bin:$PATH
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Link: https://lore.kernel.org/r/1669864248-829-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix regressions with CSR controller clones
- Fix support for Read Local Supported Codecs V2
- Fix overflow on L2CAP code
- Fix missing hci_dev_put on ISO and L2CAP code
* tag 'for-net-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: Fix crash when replugging CSR fake controllers
Bluetooth: Fix not cleanup led when bt_init fails
Bluetooth: Fix support for Read Local Supported Codecs V2
Bluetooth: Remove codec id field in vendor codec definition
Bluetooth: L2CAP: Fix u8 overflow
Bluetooth: silence a dmesg error message in hci_request.c
Bluetooth: hci_conn: add missing hci_dev_put() in iso_listen_bis()
Bluetooth: 6LoWPAN: add missing hci_dev_put() in get_l2cap_conn()
Bluetooth: btusb: Add debug message for CSR controllers
Bluetooth: btusb: Fix CSR clones again by re-adding ERR_DATA_REPORTING quirk
====================
Link: https://lore.kernel.org/r/20221202213726.2801581-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bt_init() calls bt_leds_init() to register led, but if it fails later,
bt_leds_cleanup() is not called to unregister it.
This can cause panic if the argument "bluetooth-power" in text is freed
and then another led_trigger_register() tries to access it:
BUG: unable to handle page fault for address: ffffffffc06d3bc0
RIP: 0010:strcmp+0xc/0x30
Call Trace:
<TASK>
led_trigger_register+0x10d/0x4f0
led_trigger_register_simple+0x7d/0x100
bt_init+0x39/0xf7 [bluetooth]
do_one_initcall+0xd0/0x4e0
Fixes: e64c97b53b ("Bluetooth: Add combined LED trigger for controller power")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Handling of Read Local Supported Codecs was broken during the
HCI serialization design change patches.
Fixes: d0b137062b ("Bluetooth: hci_sync: Rework init stages")
Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
As per the specfication vendor codec id is defined.
BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 4, Part E page 2127
Fixes: 9ae664028a ("Bluetooth: Add support for Read Local Supported Codecs V2")
Signed-off-by: Chethan T N <chethan.tumkur.narayan@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
On kernel 6.1-rcX, I have been getting the following dmesg error message
on every boot, resume from suspend and rfkill unblock of the Bluetooth
device:
Bluetooth: hci0: HCI_REQ-0xfcf0
After some investigation, it turned out to be caused by
commit dd50a864ff ("Bluetooth: Delete unreferenced hci_request code")
which modified hci_req_add() in net/bluetooth/hci_request.c to always
print an error message when it is executed. In my case, the function was
executed by msft_set_filter_enable() in net/bluetooth/msft.c, which
provides support for Microsoft vendor opcodes.
As explained by Brian Gix, "the error gets logged because it is using a
deprecated (but still working) mechanism to issue HCI opcodes" [1]. So
this is just a debugging tool to show that a deprecated function is
executed. As such, it should not be included in the mainline kernel.
See for example
commit 771c035372 ("deprecate the '__deprecated' attribute warnings entirely and for good")
Additionally, this error message is cryptic and the user is not able to
do anything about it.
[1]
Link: https://lore.kernel.org/lkml/beb8dcdc3aee4c5c833aa382f35995f17e7961a1.camel@intel.com/
Fixes: dd50a864ff ("Bluetooth: Delete unreferenced hci_request code")
Signed-off-by: Mateusz Jończyk <mat.jonczyk@o2.pl>
Cc: Brian Gix <brian.gix@intel.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_get_route() takes reference, we should use hci_dev_put() to release
it when not need anymore.
Fixes: f764a6c2c1 ("Bluetooth: ISO: Add broadcast support")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_get_route() takes reference, we should use hci_dev_put() to release
it when not need anymore.
Fixes: 6b8d4a6a03 ("Bluetooth: 6LoWPAN: Use connected oriented channel instead of fixed one")
Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The rationale of showing this is that it's potentially critical
information to diagnose and find more CSR compatibility bugs in the
future and it will save a lot of headaches.
Given that clones come from a wide array of vendors (some are actually
Barrot, some are something else) and these numbers are what let us find
differences between actual and fake ones, it will be immensely helpful
to scour the Internet looking for this pattern and building an actual
database to find correlations and improve the checks.
Cc: stable@vger.kernel.org
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
A patch series by a Qualcomm engineer essentially removed my
quirk/workaround because they thought it was unnecessary.
It wasn't, and it broke everything again:
https://patchwork.kernel.org/project/netdevbpf/list/?series=661703&archive=both&state=*
He argues that the quirk is not necessary because the code should check
if the dongle says if it's supported or not. The problem is that for
these Chinese CSR clones they say that it would work:
= New Index: 00:00:00:00:00:00 (Primary,USB,hci0)
= Open Index: 00:00:00:00:00:00
< HCI Command: Read Local Version Information (0x04|0x0001) plen 0
> HCI Event: Command Complete (0x0e) plen 12
> [hci0] 11.276039
Read Local Version Information (0x04|0x0001) ncmd 1
Status: Success (0x00)
HCI version: Bluetooth 5.0 (0x09) - Revision 2064 (0x0810)
LMP version: Bluetooth 5.0 (0x09) - Subversion 8978 (0x2312)
Manufacturer: Cambridge Silicon Radio (10)
...
< HCI Command: Read Local Supported Features (0x04|0x0003) plen 0
> HCI Event: Command Complete (0x0e) plen 68
> [hci0] 11.668030
Read Local Supported Commands (0x04|0x0002) ncmd 1
Status: Success (0x00)
Commands: 163 entries
...
Read Default Erroneous Data Reporting (Octet 18 - Bit 2)
Write Default Erroneous Data Reporting (Octet 18 - Bit 3)
...
...
< HCI Command: Read Default Erroneous Data Reporting (0x03|0x005a) plen 0
= Close Index: 00:1A:7D:DA:71:XX
So bring it back wholesale.
Fixes: 63b1a7dd38 ("Bluetooth: hci_sync: Remove HCI_QUIRK_BROKEN_ERR_DATA_REPORTING")
Fixes: e168f69008 ("Bluetooth: btusb: Remove HCI_QUIRK_BROKEN_ERR_DATA_REPORTING for fake CSR")
Fixes: 766ae2422b ("Bluetooth: hci_sync: Check LMP feature bit instead of quirk")
Cc: stable@vger.kernel.org
Cc: Zijun Hu <quic_zijuhu@quicinc.com>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Tested-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com>
Signed-off-by: Ismael Ferreras Morezuelas <swyterzone@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move halt-polling.rst into the common KVM documentation directory and
out of the x86-specific directory. Halt-polling is a common feature and
the existing documentation is already written as such.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20221201195249.3369720-2-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ronak Doshi says:
====================
vmxnet3: couple of fixes
This series fixes following issues:
Patch 1:
This patch provides a fix to correctly report encapsulated LRO'ed
packet.
Patch 2:
This patch provides a fix to use correct intrConf reference.
Changes in v2:
- declare generic descriptor to be used
- remove white spaces
- remove single quote around commit reference in patch 2
- remove if check for encap_lro
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 39f9895a00 ("vmxnet3: add support for 32 Tx/Rx queues")
added support for 32Tx/Rx queues. As a part of this patch, intrConf
structure was extended to incorporate increased queues.
This patch fixes the issue where incorrect reference is being used.
Fixes: 39f9895a00 ("vmxnet3: add support for 32 Tx/Rx queues")
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit dacce2be33 ("vmxnet3: add geneve and vxlan tunnel offload
support") added support for encapsulation offload. However, the
pathc did not report correctly the encapsulated packet which is
LRO'ed by the hypervisor.
This patch fixes this issue by using correct callback for the LRO'ed
encapsulated packet.
Fixes: dacce2be33 ("vmxnet3: add geneve and vxlan tunnel offload support")
Signed-off-by: Ronak Doshi <doshir@vmware.com>
Acked-by: Guolin Yang <gyang@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-11-30 (e1000e, igb)
This series contains updates to e1000e and igb drivers.
Akihiko Odaki fixes calculation for checking whether space for next
frame exists for e1000e and properly sets MSI-X vector to fix failing
ethtool interrupt test for igb.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igb: Allocate MSI-X vector when testing
e1000e: Fix TX dispatch condition
====================
Link: https://lore.kernel.org/r/20221130194228.3257787-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
af_unix: Fix a NULL deref in sk_diag_dump_uid().
The first patch fixes a NULL deref when we dump a AF_UNIX socket's UID,
and the second patch adds a repro/test for such a case.
====================
Link: https://lore.kernel.org/r/20221127012412.37969-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The test prog dumps a single AF_UNIX socket's UID with and without
unshare(CLONE_NEWUSER) and checks if it matches the result of getuid().
Without the preceding patch, the test prog is killed by a NULL deref
in sk_diag_dump_uid().
# ./diag_uid
TAP version 13
1..2
# Starting 2 tests from 3 test cases.
# RUN diag_uid.uid.1 ...
BUG: kernel NULL pointer dereference, address: 0000000000000270
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 105212067 P4D 105212067 PUD 1051fe067 PMD 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.amzn2022.0.1 04/01/2014
RIP: 0010:sk_diag_fill (./include/net/sock.h:920 net/unix/diag.c:119 net/unix/diag.c:170)
...
# 1: Test terminated unexpectedly by signal 9
# FAIL diag_uid.uid.1
not ok 1 diag_uid.uid.1
# RUN diag_uid.uid_unshare.1 ...
# 1: Test terminated by timeout
# FAIL diag_uid.uid_unshare.1
not ok 2 diag_uid.uid_unshare.1
# FAILED: 0 / 2 tests passed.
# Totals: pass:0 fail:2 xfail:0 xpass:0 skip:0 error:0
With the patch, the test succeeds.
# ./diag_uid
TAP version 13
1..2
# Starting 2 tests from 3 test cases.
# RUN diag_uid.uid.1 ...
# OK diag_uid.uid.1
ok 1 diag_uid.uid.1
# RUN diag_uid.uid_unshare.1 ...
# OK diag_uid.uid_unshare.1
ok 2 diag_uid.uid_unshare.1
# PASSED: 2 / 2 tests passed.
# Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Cheap monitors sometimes advertise YUV modes they don't really have
(HDMI specification mandates YUV support so even monitors without actual
support will often wrongfully advertise it) which results in YUV matches
and user forum complaints of a red tint to light colour display areas in
common desktop environments.
Moving the default RGB fall-back before YUV selection results in RGB
mode matching in most cases, reducing complaints.
Fixes: 6c3c719936 ("drm/bridge: synopsys: dw-hdmi: add bus format negociation")
Signed-off-by: Guillaume BRUN <the.cheaterman@gmail.com>
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221116143523.2126-1-the.cheaterman@gmail.com
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Check for interval validity in all concatenation fields in
nft_set_pipapo, from Stefano Brivio.
2) Missing preemption disabled in conntrack and flowtable stat
updates, from Xin Long.
3) Fix compilation warning when CONFIG_NF_CONNTRACK_MARK=n.
Except for 3) which was a bug introduced in a recent fix in 6.1-rc
- anything else, broken for several releases.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: ctnetlink: fix compilation warning after data race fixes in ct mark
netfilter: conntrack: fix using __this_cpu_add in preemptible
netfilter: flowtable_offload: fix using __this_cpu_add in preemptible
netfilter: nft_set_pipapo: Actually validate intervals in fields after the first one
====================
Link: https://lore.kernel.org/r/20221130121934.1125-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The am65-cpsw driver supports configuring all RGMII variants at interface
speed of 10 Mbps. However, in the process of shifting to the PHYLINK
framework, the support for all variants of RGMII except the
PHY_INTERFACE_MODE_RGMII variant was accidentally removed.
Fix this by using phy_interface_mode_is_rgmii() to check for all variants
of RGMII mode.
Fixes: e8609e6947 ("net: ethernet: ti: am65-cpsw: Convert to PHYLINK")
Reported-by: Schuyler Patton <spatton@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20221129050639.111142-1-s-vadapalli@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
commit 8d820bc9d1 ("net: broadcom: Fix BCMGENET Kconfig") fixes the build
that contain 99addbe31f ("net: broadcom: Select BROADCOM_PHY for BCMGENET")
and enable BCMGENET=y but PTP_1588_CLOCK_OPTIONAL=m, which otherwise
leads to a link failure. However this may trigger a runtime failure.
Fix the original issue by propagating the PTP_1588_CLOCK_OPTIONAL dependency
of BROADCOM_PHY down to BCMGENET.
Fixes: 8d820bc9d1 ("net: broadcom: Fix BCMGENET Kconfig")
Fixes: 99addbe31f ("net: broadcom: Select BROADCOM_PHY for BCMGENET")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20221125115003.30308-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Without this change, the interrupt test fail with MSI-X environment:
$ sudo ethtool -t enp0s2 offline
[ 43.921783] igb 0000:00:02.0: offline testing starting
[ 44.855824] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Down
[ 44.961249] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[ 51.272202] igb 0000:00:02.0: testing shared interrupt
[ 56.996975] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
The test result is FAIL
The test extra info:
Register test (offline) 0
Eeprom test (offline) 0
Interrupt test (offline) 4
Loopback test (offline) 0
Link test (on/offline) 0
Here, "4" means an expected interrupt was not delivered.
To fix this, route IRQs correctly to the first MSI-X vector by setting
IVAR_MISC. Also, set bit 0 of EIMS so that the vector will not be
masked. The interrupt test now runs properly with this change:
$ sudo ethtool -t enp0s2 offline
[ 42.762985] igb 0000:00:02.0: offline testing starting
[ 50.141967] igb 0000:00:02.0: testing shared interrupt
[ 56.163957] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
The test result is PASS
The test extra info:
Register test (offline) 0
Eeprom test (offline) 0
Interrupt test (offline) 0
Loopback test (offline) 0
Link test (on/offline) 0
Fixes: 4eefa8f013 ("igb: add single vector msi-x testing to interrupt test")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
e1000_xmit_frame is expected to stop the queue and dispatch frames to
hardware if there is not sufficient space for the next frame in the
buffer, but sometimes it failed to do so because the estimated maximum
size of frame was wrong. As the consequence, the later invocation of
e1000_xmit_frame failed with NETDEV_TX_BUSY, and the frame in the buffer
remained forever, resulting in a watchdog failure.
This change fixes the estimated size by making it match with the
condition for NETDEV_TX_BUSY. Apparently, the old estimation failed to
account for the following lines which determines the space requirement
for not causing NETDEV_TX_BUSY:
```
/* reserve a descriptor for the offload context */
if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
count++;
count++;
count += DIV_ROUND_UP(len, adapter->tx_fifo_limit);
```
This issue was found when running http-stress02 test included in Linux
Test Project 20220930 on QEMU with the following commandline:
```
qemu-system-x86_64 -M q35,accel=kvm -m 8G -smp 8
-drive if=virtio,format=raw,file=root.img,file.locking=on
-device e1000e,netdev=netdev
-netdev tap,script=ifup,downscript=no,id=netdev
```
Fixes: bc7f75fa97 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
for_each_pci_dev() is implemented by pci_get_device(). The comment of
pci_get_device() says that it will increase the reference count for the
returned pci_dev and also decrease the reference count for the input
pci_dev @from if it is not NULL.
If we break for_each_pci_dev() loop with pdev not NULL, we need to call
pci_dev_put() to decrease the reference count. Add the missing
pci_dev_put() after the 'out' label. Since pci_dev_put() can handle NULL
input parameter, there is no problem for the 'Device not found' branch.
For the normal path, add pci_dev_put() in amd_gpio_exit().
Fixes: f942a7de04 ("gpio: add a driver for GPIO pins found on AMD-8111 south bridge chips")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
If a triple fault was fixed by kvm_x86_ops.nested_ops->triple_fault (by
turning it into a vmexit), there is no need to leave vcpu_enter_guest().
Any vcpu->requests will be caught later before the actual vmentry,
and in fact vcpu_enter_guest() was not initializing the "r" variable.
Depending on the compiler's whims, this could cause the
x86_64/triple_fault_event_test test to fail.
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Fixes: 92e7d5c83a ("KVM: x86: allow L1 to not intercept triple fault")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to the description in ti-sn65dsi86's datasheet:
CHA_HSYNC_POLARITY:
0 = Active High Pulse. Synchronization signal is high for the sync
pulse width. (default)
1 = Active Low Pulse. Synchronization signal is low for the sync
pulse width.
CHA_VSYNC_POLARITY:
0 = Active High Pulse. Synchronization signal is high for the sync
pulse width. (Default)
1 = Active Low Pulse. Synchronization signal is low for the sync
pulse width.
We should only set these bits when the polarity is negative.
Fixes: a095f15c00 ("drm/bridge: add support for sn65dsi86 bridge driver")
Signed-off-by: Qiqi Zhang <eddy.zhang@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221125104558.84616-1-eddy.zhang@rock-chips.com
Currently in nf_conntrack_hash_check_insert(), when it fails in
nf_ct_ext_valid_pre/post(), NF_CT_STAT_INC() will be called in the
preemptible context, a call trace can be triggered:
BUG: using __this_cpu_add() in preemptible [00000000] code: conntrack/1636
caller is nf_conntrack_hash_check_insert+0x45/0x430 [nf_conntrack]
Call Trace:
<TASK>
dump_stack_lvl+0x33/0x46
check_preemption_disabled+0xc3/0xf0
nf_conntrack_hash_check_insert+0x45/0x430 [nf_conntrack]
ctnetlink_create_conntrack+0x3cd/0x4e0 [nf_conntrack_netlink]
ctnetlink_new_conntrack+0x1c0/0x450 [nf_conntrack_netlink]
nfnetlink_rcv_msg+0x277/0x2f0 [nfnetlink]
netlink_rcv_skb+0x50/0x100
nfnetlink_rcv+0x65/0x144 [nfnetlink]
netlink_unicast+0x1ae/0x290
netlink_sendmsg+0x257/0x4f0
sock_sendmsg+0x5f/0x70
This patch is to fix it by changing to use NF_CT_STAT_INC_ATOMIC() for
nf_ct_ext_valid_pre/post() check in nf_conntrack_hash_check_insert(),
as well as nf_ct_ext_valid_post() in __nf_conntrack_confirm().
Note that nf_ct_ext_valid_pre() check in __nf_conntrack_confirm() is
safe to use NF_CT_STAT_INC(), as it's under local_bh_disable().
Fixes: c56716c69c ("netfilter: extensions: introduce extension genid count")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The struct cas_control embeds multiple generic SPI structures and we
have to make sure these structures are initialized to default values.
This driver does not set all attributes. When using kmalloc before some
attributes were not initialized and contained random data which caused
random crashes at bootup.
Fixes: ded845a781 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Link: https://lore.kernel.org/r/20221121002201.1339636-1-hauke@hauke-m.de
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
flow_offload_queue_work() can be called in workqueue without
bh disabled, like the call trace showed in my act_ct testing,
calling NF_FLOW_TABLE_STAT_INC() there would cause a call
trace:
BUG: using __this_cpu_add() in preemptible [00000000] code: kworker/u4:0/138560
caller is flow_offload_queue_work+0xec/0x1b0 [nf_flow_table]
Workqueue: act_ct_workqueue tcf_ct_flow_table_cleanup_work [act_ct]
Call Trace:
<TASK>
dump_stack_lvl+0x33/0x46
check_preemption_disabled+0xc3/0xf0
flow_offload_queue_work+0xec/0x1b0 [nf_flow_table]
nf_flow_table_iterate+0x138/0x170 [nf_flow_table]
nf_flow_table_free+0x140/0x1a0 [nf_flow_table]
tcf_ct_flow_table_cleanup_work+0x2f/0x2b0 [act_ct]
process_one_work+0x6a3/0x1030
worker_thread+0x8a/0xdf0
This patch fixes it by using NF_FLOW_TABLE_STAT_INC_ATOMIC()
instead in flow_offload_queue_work().
Note that for FLOW_CLS_REPLACE branch in flow_offload_queue_work(),
it may not be called in preemptible path, but it's good to use
NF_FLOW_TABLE_STAT_INC_ATOMIC() for all cases in
flow_offload_queue_work().
Fixes: b038177636 ("netfilter: nf_flow_table: count pending offload workqueue tasks")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Embarrassingly, nft_pipapo_insert() checked for interval validity in
the first field only.
The start_p and end_p pointers were reset to key data from the first
field at every iteration of the loop which was supposed to go over
the set fields.
Fixes: 3c4287f620 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Reported-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Here is a backtrace report about memory leak detected in
gpiochip_setup_dev():
unreferenced object 0xffff88810b406400 (size 512):
comm "python3", pid 1682, jiffies 4295346908 (age 24.090s)
backtrace:
kmalloc_trace
device_add device_private_init at drivers/base/core.c:3361
(inlined by) device_add at drivers/base/core.c:3411
cdev_device_add
gpiolib_cdev_register
gpiochip_setup_dev
gpiochip_add_data_with_key
gcdev_register() & gcdev_unregister() would call device_add() &
device_del() (no matter CONFIG_GPIO_CDEV is enabled or not) to
register/unregister device.
However, if device_add() succeeds, some resource (like
struct device_private allocated by device_private_init())
is not released by device_del().
Therefore, after device_add() succeeds by gcdev_register(), it
needs to call put_device() to release resource in the error handle
path.
Here we move forward the register of release function, and let it
release every piece of resource by put_device() instead of kfree().
While at it, fix another subtle issue, i.e. when gc->ngpio is equal
to 0, we still call kcalloc() and, in case of further error, kfree()
on the ZERO_PTR pointer, which is not NULL. It's not a bug per se,
but rather waste of the resources and potentially wrong expectation
about contents of the gdev->descs variable.
Fixes: 159f3cd92f ("gpiolib: Defer gpio device setup until after gpiolib initialization")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The L2 cache is present on the newer SAMA5D2 and SAMA5D4 families, but
apparently not for the older SAMA5D3.
Solves a build-time regression with the following symptom:
sama5.c:(.init.text+0x48): undefined reference to `outer_cache'
Fixes: 3b5a7ca7d2 ("ARM: at91: setup outer cache .write_sec() callback if needed")
Signed-off-by: Peter Rosin <peda@axentia.se>
[claudiu.beznea: delete "At least not always." from commit description]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/b7f8dacc-5e1f-0eb2-188e-3ad9a9f7613d@axentia.se
Sanity checks were added to verify the v4l2_bt_timings blanking fields
in order to avoid integer overflows when userspace passes weird values.
But that assumed that userspace would correctly fill in the front porch,
backporch and sync values, but sometimes all you know is the total
blanking, which is then assigned to just one of these fields.
And that can fail with these checks.
So instead set a maximum for the total horizontal and vertical
blanking and check that each field remains below that.
That is still sufficient to avoid integer overflows, but it also
allows for more flexibility in how userspace fills in these fields.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 4b6d66a45e ("media: v4l2-dv-timings: add sanity checks for blanking values")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Some additional USB mouse devices are needing ALWAYS_POLL quirk without
which they disconnect and reconnect every 60s.
Add below devices to the known quirk list.
CHERRY VID 0x046a, PID 0x000c
MICROSOFT VID 0x045e, PID 0x0783
PRIMAX VID 0x0461, PID 0x4e2a
Signed-off-by: Ankit Patel <anpatel@nvidia.com>
Signed-off-by: Haotien Hsu <haotienh@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Syzbot reported shift-out-of-bounds in hid_report_raw_event.
microsoft 0003:045E:07DA.0001: hid_field_extract() called with n (128) >
32! (swapper/0)
======================================================================
UBSAN: shift-out-of-bounds in drivers/hid/hid-core.c:1323:20
shift exponent 127 is too large for 32-bit type 'int'
CPU: 0 PID: 0 Comm: swapper/0 Not tainted
6.1.0-rc4-syzkaller-00159-g4bbf3422df78 #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS
Google 10/26/2022
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1e3/0x2cb lib/dump_stack.c:106
ubsan_epilogue lib/ubsan.c:151 [inline]
__ubsan_handle_shift_out_of_bounds+0x3a6/0x420 lib/ubsan.c:322
snto32 drivers/hid/hid-core.c:1323 [inline]
hid_input_fetch_field drivers/hid/hid-core.c:1572 [inline]
hid_process_report drivers/hid/hid-core.c:1665 [inline]
hid_report_raw_event+0xd56/0x18b0 drivers/hid/hid-core.c:1998
hid_input_report+0x408/0x4f0 drivers/hid/hid-core.c:2066
hid_irq_in+0x459/0x690 drivers/hid/usbhid/hid-core.c:284
__usb_hcd_giveback_urb+0x369/0x530 drivers/usb/core/hcd.c:1671
dummy_timer+0x86b/0x3110 drivers/usb/gadget/udc/dummy_hcd.c:1988
call_timer_fn+0xf5/0x210 kernel/time/timer.c:1474
expire_timers kernel/time/timer.c:1519 [inline]
__run_timers+0x76a/0x980 kernel/time/timer.c:1790
run_timer_softirq+0x63/0xf0 kernel/time/timer.c:1803
__do_softirq+0x277/0x75b kernel/softirq.c:571
__irq_exit_rcu+0xec/0x170 kernel/softirq.c:650
irq_exit_rcu+0x5/0x20 kernel/softirq.c:662
sysvec_apic_timer_interrupt+0x91/0xb0 arch/x86/kernel/apic/apic.c:1107
======================================================================
If the size of the integer (unsigned n) is bigger than 32 in snto32(),
shift exponent will be too large for 32-bit type 'int', resulting in a
shift-out-of-bounds bug.
Fix this by adding a check on the size of the integer (unsigned n) in
snto32(). To add support for n greater than 32 bits, set n to 32, if n
is greater than 32.
Reported-by: syzbot+8b1641d2f14732407e23@syzkaller.appspotmail.com
Fixes: dde5845a52 ("[PATCH] Generic HID layer - code split")
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Commit f7d8e387d9 ("HID: uclogic: Switch to Digitizer usage for
styluses") changed the usage used in UCLogic from "Pen" to "Digitizer".
However, the IS_INPUT_APPLICATION() macro evaluates to false for
HID_DG_DIGITIZER causing issues with the XP-Pen Star G640 tablet.
Add the HID_QUIRK_HIDINPUT_FORCE quirk to bypass the
IS_INPUT_APPLICATION() check.
Reported-by: Torge Matthies <openglfreak@googlemail.com>
Reported-by: Alexander Zhang <alex@alexyzhang.dev>
Tested-by: Alexander Zhang <alex@alexyzhang.dev>
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When I2C_HID_OF_ELAN is set, we need to turn on I2C_HID_CORE to
ensure we get all the HID requirements.
Fixes: bd3cba00dc ("HID: i2c-hid: elan: Add support for Elan eKTH6915 i2c-hid touchscreens")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
If an empty buf is received, lbuf is also empty. So lbuf is
accessed by index -1.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: f31a2de3fe ("HID: hid-lg4ff: Allow switching of Logitech gaming wheels between compatibility modes")
Signed-off-by: Anastasia Belova <abelova@astralinux.ru>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The Acer Aspire Switch V 10 (SW5-017)'s keyboard-dock uses the same
ITE controller setup as other Acer Switch 2-in-1's.
This needs special handling for the wifi on/off toggle hotkey as well as
to properly report touchpad on/off keypresses.
Add the USB-ids for the SW5-017's keyboard-dock with a quirk setting of
QUIRK_TOUCHPAD_ON_OFF_REPORT to fix both issues.
Cc: Rudolf Polzer <rpolzer@google.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When parsing a frame template with a placeholder indicating the number
of buttons present on the frame its value was incorrectly set on big
endian architectures due to double little endian conversion.
In order to reproduce the issue and verify the fix, run the HID KUnit
tests on the PowerPC architecture:
$ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/hid \
--arch=powerpc --cross_compile=powerpc64-linux-gnu-
Fixes: 867c892544 ("HID: uclogic: Allow to generate frame templates")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2022-11-14 15:02:38 +01:00
144 changed files with 1239 additions and 457 deletions
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.