Pull misc perf fixes from Ingo Molnar:
- Fix a PMU enumeration/initialization bug on Intel Alder Lake CPUs
- Fix KVM guest PEBS register handling
- Fix race/reentry bug in perf_output_read_group() reading of PMU
counters
* tag 'perf-urgent-2022-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix reentry problem in perf_output_read_group()
perf/x86/core: Completely disable guest PEBS via guest's global_ctrl
perf/x86/intel: Fix unchecked MSR access error for Alder Lake N
Pull x86 fixes from Borislav Petkov:
- Add the respective UP last level cache mask accessors in order not to
cause segfaults when lscpu accesses their representation in sysfs
- Fix for a race in the alternatives batch patching machinery when
kprobes are set
* tag 'x86_urgent_for_v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cacheinfo: Add a cpu_llc_shared_mask() UP variant
x86/alternative: Fix race in try_get_desc()
The pm_runtime_enable will increase power disable depth. Thus a
pairing decrement is needed on the error handling path to keep
it balanced according to context.
Fixes: 17f88151ff ("i2c: davinci: Add PM Runtime Support")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Document wakeup-source property. This fixes dtbs_check warnings
when building current Linux DTs:
"
arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dtb: i2c@40015000: Unevaluated properties are not allowed ('wakeup-source' was unexpected)
"
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Document interrupt-names property with "event" and "error" interrupt names.
This fixes dtbs_check warnings when building current Linux DTs:
"
arch/arm/boot/dts/stm32mp153c-dhcom-drc02.dtb: i2c@40015000: Unevaluated properties are not allowed ('interrupt-names' was unexpected)
"
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Pull USB/Thunderbolt fixes from Greg KH:
"Here are some tiny USB and Thunderbolt driver fixes and quirks.
Included in here are:
- three uas/usb-storage driver quirks to get the devices working
properly due to broken firmware images in them (they can not run at
high data rates, and are also throttled on other operating systems
because of this)
- thunderbolt bugfix for plug event delays
- typec runtime warning removal
- dwc3 st driver bugfix. Note, a follow-on fix for this will end up
coming in for 6.1-rc1 as the developers are still arguing over what
the final solution will be, but this should be sufficient for now
All of these have been in linux-next with no reported problems"
* tag 'usb-6.0-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
uas: ignore UAS for Thinkplus chips
usb-storage: Add Hiksemi USB3-FW to IGNORE_UAS
uas: add no-uas quirk for Hiksemi usb_disk
usb: dwc3: st: Fix node's child name
usb: typec: ucsi: Remove incorrect warning
thunderbolt: Explicitly reset plug events delay back to USB4 spec value
Pull media fixes from Mauro Carvalho Chehab:
- some fixes for the v4l2 ioctl handler logic
- a fix for an out of bound access in the DVB videobuf2 handler
- three driver fixes (rkvdec, mediatek/vcodek and uvcvideo)
* tag 'media/v6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: rkvdec: Disable H.264 error detection
media: mediatek: vcodec: Drop platform_get_resource(IORESOURCE_IRQ)
media: dvb_vb2: fix possible out of bound access
media: v4l2-ioctl.c: fix incorrect error path
media: v4l2-compat-ioctl32.c: zero buffer passed to v4l2_compat_get_array_args()
media: uvcvideo: Fix InterfaceProtocol for Quanta camera
Pull more hotfixes from Andrew Morton:
"One MAINTAINERS update, two MM fixes, both cc:stable"
The previous pull wasn't fated to be the last one..
* tag 'mm-hotfixes-stable-2022-09-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
damon/sysfs: fix possible memleak on damon_sysfs_add_target
mm: fix BUG splat with kvmalloc + GFP_ATOMIC
MAINTAINERS: drop entry to removed file in ARM/RISCPC ARCHITECTURE
When damon_sysfs_add_target couldn't find proper task, New allocated
damon_target structure isn't registered yet, So, it's impossible to free
new allocated one by damon_sysfs_destroy_targets.
By calling damon_add_target as soon as allocating new target, Fix this
possible memory leak.
Link: https://lkml.kernel.org/r/20220926160611.48536-1-sj@kernel.org
Fixes: a61ea561c8 ("mm/damon/sysfs: link DAMON for virtual address spaces monitoring")
Signed-off-by: Levi Yun <ppbuk5246@gmail.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.17.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull drm fixes from Daniel Vetter:
"Some last minute amd fixes:
- VCN 4.x and GC 11.x fixes, mostly around fw"
* tag 'drm-fixes-2022-10-01' of git://anongit.freedesktop.org/drm/drm:
drm/amdgpu/gfx11: switch to amdgpu_gfx_rlc_init_microcode
drm/amdgpu: add helper to init rlc firmware
drm/amdgpu: add helper to init rlc fw in header v2_4
drm/amdgpu: add helper to init rlc fw in header v2_3
drm/amdgpu: add helper to init rlc fw in header v2_2
drm/amdgpu: add helper to init rlc fw in header v2_1
drm/amdgpu: add helper to init rlc fw in header v2_0
drm/amdgpu: save rlcv/rlcp ucode version in amdgpu_gfx
drm/amdgpu: Enable sram on vcn_4_0_2
drm/amdgpu: Enable VCN DPG for GC11_0_1
Pull clk driver fixes from Stephen Boyd:
"Here's the last batch of clk driver fixes for this release.
These patches fix serious problems, for example, i.MX has an issue
where changing the NAND clk frequency hangs the system. On Allwinner
H6 the GPU is being overclocked which could lead to long term hardware
damage.
And finally on some Broadcom SoCs the serial console stopped working
because the clk tree hierarchy description got broken by an
inadvertant DT node name change. That's fixed by using
'clock-output-names' to generate a stable and unique name for clks so
the framework can properly link things up.
There's also a couple build fixes in here. One to fix CONFIG_OF=n
builds and one to avoid an array out of bounds bug that happens during
clk registration on microchip. I hope that KASAN would have found that
OOB problem, but probably KASAN wasn't attempted. Instead LLVM/clang
compilation caused an oops, while GCC didn't"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: imx93: drop of_match_ptr
clk: iproc: Do not rely on node name for correct PLL setup
clk: sunxi-ng: h6: Fix default PLL GPU rate
clk: imx: imx6sx: remove the SET_RATE_PARENT flag for QSPI clocks
clk: microchip: mpfs: make the rtc's ahb clock critical
clk: microchip: mpfs: fix clk_cfg array bounds violation
clk: ingenic-tcu: Properly enable registers before accessing timers
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fail the 'perf test record' entry on error, fixing a regression where
just setup stuff like allocating memory and not the actual things
being tested failed.
- Fixup disabling of -Wdeprecated-declarations for the python scripting
engine, the previous attempt had a brown paper bag thinko.
- Fix branch stack sampling test to include sanity check for branch
filter on PowerPC.
- Update is_ignored_symbol function to match the kernel ignored list,
fixing running the 'perf test' entry that compares resolving symbols
from kallsyms to resolving from vmlinux.
- Augment the data source type with ARM's neoverse_spe list, the
previous code was limited in its search resolving the data source.
- Fix some clang 5 variable set but unused cases.
- Get a perf cgroup more portably in BPF as the
__builtin_preserve_enum_value builtin is not available in older
versions of clang. In those cases we can forgo BPF's CO-RE (Compile
Once, Run Everywhere).
- More Fixes for Intel's hybrid CPU model.
* tag 'perf-tools-fixes-for-v6.0-2022-09-29' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf build: Fixup disabling of -Wdeprecated-declarations for the python scripting engine
perf tests mmap-basic: Remove unused variable to address clang 15 warning
perf parse-events: Ignore clang 15 warning about variable set but unused in bison produced code
perf tests record: Fail the test if the 'errs' counter is not zero
perf test: Fix test case 87 ("perf record tests") for hybrid systems
perf arm-spe: augment the data source type with neoverse_spe list
perf tests vmlinux-kallsyms: Update is_ignored_symbol function to match the kernel ignored list
perf tests powerpc: Fix branch stack sampling test to include sanity check for branch filter
perf parse-events: Remove "not supported" hybrid cache events
perf print-events: Fix "perf list" can not display the PMU prefix for some hybrid cache events
perf tools: Get a perf cgroup more portably in BPF
Pull kvm fixes from Paolo Bonzini:
"A small fix to the reported set of supported CPUID bits, and selftests
fixes:
- Skip tests that require EPT when it is not available
- Do not hang when a test fails with an empty stack trace
- avoid spurious failure when running access_tracking_perf_test in a
KVM guest
- work around GCC's tendency to optimize loops into mem*() functions,
which breaks because the guest code in selftests cannot call into
PLTs
- fix -Warray-bounds error in fix_hypercall_test"
* tag 'for-linus-6.0' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: Compare insn opcodes directly in fix_hypercall_test
KVM: selftests: Implement memcmp(), memcpy(), and memset() for guest use
KVM: x86: Hide IA32_PLATFORM_DCA_CAP[31:0] from the guest
KVM: selftests: Gracefully handle empty stack traces
KVM: selftests: replace assertion with warning in access_tracking_perf_test
KVM: selftests: Skip tests that require EPT when it is not available
Pull virtio fixes from Michael Tsirkin:
"Some last minute fixes.
The virtio-blk one is the most important one since it was actually
seen in the field, but the rest of them are small and clearly safe,
everything here has been in next for a while"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa/mlx5: Fix MQ to support non power of two num queues
vduse: prevent uninitialized memory accesses
virtio-blk: Fix WARN_ON_ONCE in virtio_queue_rq()
virtio_test: fixup for vq reset
virtio-crypto: fix memory-leak
vdpa/ifcvf: fix the calculation of queuepair
Pull block fixes from Jens Axboe:
"A single NVMe pull request via Christoph with a few fixes that should
go into the 6.0 release:
- Fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices
(Michael Kelley)
- Disable Write Zeroes on Phison E3C/E4C (Tina Hsu)"
* tag 'block-6.0-2022-09-29' of git://git.kernel.dk/linux:
nvme-pci: disable Write Zeroes on Phison E3C/E4C
nvme: Fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices
Pull io_uring fixes from Jens Axboe:
"Two fixes that should go into 6.0:
- Tweak the single issuer logic to register the task at creation,
rather than at first submit. SINGLE_ISSUER was added for 6.0, and
after some discussion on this, we decided to make it a bit stricter
while it's still possible to do so (Dylan).
- Stefan from Samba had some doubts on the level triggered poll that
was added for this release. Rather than attempt to mess around with
it now, just do the quick one-liner to disable it for release and
we have time to discuss and change it for 6.1 instead (me)"
* tag 'io_uring-6.0-2022-09-29' of git://git.kernel.dk/linux:
io_uring/poll: disable level triggered poll
io_uring: register single issuer task at creation
Pull pstore revert from Kees Cook:
"A misbehavior with some compression backends in pstore was just
discovered due to the recent crypto acomp migration.
Since we're so close to release, it seems better to just simply revert
it, and we can figure out what's going on without leaving it broken
for a release.
- Revert crypto acomp migration (Guilherme G. Piccoli)"
* tag 'pstore-v6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
Revert "pstore: migrate to crypto acomp interface"
Pull gpio fixes from Bartosz Golaszewski:
"One more fix for the upcoming release:
- fix the check for pwm support on non-A8K platforms in gpio-mvebu"
* tag 'gpio-fixes-for-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mvebu: Fix check for pwm support on non-A8K platforms
This reverts commit e4f0a7ec58.
When using this new interface, both efi_pstore and ramoops
backends are unable to properly decompress dmesg if using
zstd, lz4 and lzo algorithms (and maybe more). It does succeed
with deflate though.
The message observed in the kernel log is:
[2.328828] pstore: crypto_acomp_decompress failed, ret = -22!
The pstore infrastructure is able to collect the dmesg with
both backends tested, but since decompression fails it's
unreadable. With this revert everything is back to normal.
Fixes: e4f0a7ec58 ("pstore: migrate to crypto acomp interface")
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220929215515.276486-1-gpiccoli@igalia.com
Pull drm fixes from Dave Airlie:
"Last set of fixes for 6.0 hopefully - minor bridge fixes, i915 fixes,
and a bunch of amdgpu fixes for new IP blocks, along with a couple of
regression fixes. Should be all set for merge window next week.
amdgpu:
- GC 11.x fixes
- SMU 13.x fixes
- DCN 3.1.4 fixes
- DCN 3.2.x fixes
- GC 9.x fix
- Fence fix
- SR-IOV supend/resume fix
- PSR regression fix
i915:
- Restrict forced preemption to the active context
- Restrict perf_limit_reasons to the supported platforms - gen11+
bridge:
- analogix: Revert earlier suspend fix
- lt8912b: Fix corrupt display output"
* tag 'drm-fixes-2022-09-30-1' of git://anongit.freedesktop.org/drm/drm: (26 commits)
drm/amd/display: Prevent OTG shutdown during PSR SU
drm/i915/gt: Perf_limit_reasons are only available for Gen11+
drm/amdgpu: Add amdgpu suspend-resume code path under SRIOV
drm/amdgpu: Remove fence_process in count_emitted
drm/amdgpu: Correct the position in patch_cond_exec
drm/amd/display: fill in clock values when DPM is not enabled
drm/amd/display: Avoid unnecessary pixel rate divider programming
drm/amd/display: Remove assert for odm transition case
drm/amd/display: Fix typo in get_pixel_rate_div
drm/amd/display: Fix audio on display after unplugging another
drm/amd/display: Add explicit FIFO disable for DP blank
drm/amd/display: Wrap OTG disable workaround with FIFO control
drm/amd/display: Do DIO FIFO enable after DP video stream enable
drm/amd/display: Update DCN32 to use new SR latencies
drm/amd/display: Avoid avoid unnecessary pixel rate divider programming
drm/amdkfd: fix dropped interrupt in kfd_int_process_v11
drm/amdgpu: pass queue size and is_aql_queue to MES
drm/amdkfd: fix MQD init for GFX11 in init_mqd
drm/amd/pm: use adverse selection for dpm features unsupported by driver
drm/amd/pm: enable gfxoff feature for SMU 13.0.0
...
Directly compare the expected versus observed hypercall instructions when
verifying that KVM patched in the native hypercall (FIX_HYPERCALL_INSN
quirk enabled). gcc rightly complains that doing a 4-byte memcpy() with
an "unsigned char" as the source generates an out-of-bounds accesses.
Alternatively, "exp" and "obs" could be declared as 3-byte arrays, but
there's no known reason to copy locally instead of comparing directly.
In function ‘assert_hypercall_insn’,
inlined from ‘guest_main’ at x86_64/fix_hypercall_test.c:91:2:
x86_64/fix_hypercall_test.c:63:9: error: array subscript ‘unsigned int[0]’
is partly outside array bounds of ‘unsigned char[1]’ [-Werror=array-bounds]
63 | memcpy(&exp, exp_insn, sizeof(exp));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
x86_64/fix_hypercall_test.c: In function ‘guest_main’:
x86_64/fix_hypercall_test.c:42:22: note: object ‘vmx_hypercall_insn’ of size 1
42 | extern unsigned char vmx_hypercall_insn;
| ^~~~~~~~~~~~~~~~~~
x86_64/fix_hypercall_test.c:25:22: note: object ‘svm_hypercall_insn’ of size 1
25 | extern unsigned char svm_hypercall_insn;
| ^~~~~~~~~~~~~~~~~~
In function ‘assert_hypercall_insn’,
inlined from ‘guest_main’ at x86_64/fix_hypercall_test.c:91:2:
x86_64/fix_hypercall_test.c:64:9: error: array subscript ‘unsigned int[0]’
is partly outside array bounds of ‘unsigned char[1]’ [-Werror=array-bounds]
64 | memcpy(&obs, obs_insn, sizeof(obs));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
x86_64/fix_hypercall_test.c: In function ‘guest_main’:
x86_64/fix_hypercall_test.c:25:22: note: object ‘svm_hypercall_insn’ of size 1
25 | extern unsigned char svm_hypercall_insn;
| ^~~~~~~~~~~~~~~~~~
x86_64/fix_hypercall_test.c:42:22: note: object ‘vmx_hypercall_insn’ of size 1
42 | extern unsigned char vmx_hypercall_insn;
| ^~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make: *** [../lib.mk:135: tools/testing/selftests/kvm/x86_64/fix_hypercall_test] Error 1
Fixes: 6c2fa8b20d ("selftests: KVM: Test KVM_X86_QUIRK_FIX_HYPERCALL_INSN")
Cc: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20220928233652.783504-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implement memcmp(), memcpy(), and memset() to override the compiler's
built-in versions in order to guarantee that the compiler won't generate
out-of-line calls to external functions via the PLT. This allows the
helpers to be safely used in guest code, as KVM selftests don't support
dynamic loading of guest code.
Steal the implementations from the kernel's generic versions, sans the
optimizations in memcmp() for unaligned accesses.
Put the utilities in a separate compilation unit and build with
-ffreestanding to fudge around a gcc "feature" where it will optimize
memset(), memcpy(), etc... by generating a recursive call. I.e. the
compiler optimizes itself into infinite recursion. Alternatively, the
individual functions could be tagged with
optimize("no-tree-loop-distribute-patterns"), but using "optimize" for
anything but debug is discouraged, and Linus NAK'd the use of the flag
in the kernel proper[*].
https://lore.kernel.org/lkml/CAHk-=wik-oXnUpfZ6Hw37uLykc-_P0Apyn2XuX-odh-3Nzop8w@mail.gmail.com
Cc: Andrew Jones <andrew.jones@linux.dev>
Cc: Anup Patel <anup@brainfault.org>
Cc: Atish Patra <atishp@atishpatra.org>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220928233652.783504-2-seanjc@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The only thing reported by CPUID.9 is the value of
IA32_PLATFORM_DCA_CAP[31:0] in EAX. This MSR doesn't even exist in the
guest, since CPUID.1:ECX.DCA[bit 18] is clear in the guest.
Clear CPUID.9 in KVM_GET_SUPPORTED_CPUID.
Fixes: 24c82e576b ("KVM: Sanitize cpuid")
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220922231854.249383-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Bail out of test_dump_stack() if the stack trace is empty rather than
invoking addr2line with zero addresses. The problem with the latter is
that addr2line will block waiting for addresses to be passed in via
stdin, e.g. if running a selftest from an interactive terminal.
Opportunistically fix up the comment that mentions skipping 3 frames
since only 2 are skipped in the code.
Cc: Vipin Sharma <vipinsh@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220922231724.3560211-1-dmatlack@google.com>
[Small tweak to keep backtrace() call close to if(). - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Page_idle uses {ptep/pmdp}_clear_young_notify which in turn calls
the mmu notifier callback ->clear_young(), which purposefully
does not flush the TLB.
When running the test in a nested guest, point 1. of the test
doc header is violated, because KVM TLB is unbounded by size
and since no flush is forced, KVM does not update the sptes
accessed/idle bits resulting in guest assertion failure.
More precisely, only the first ACCESS_WRITE in run_test() actually
makes visible changes, because sptes are created and the accessed
bit is set to 1 (or idle bit is 0). Then the first mark_memory_idle()
passes since access bit is still one, and sets all pages as idle
(or not accessed). When the next write is performed, the update
is not flushed therefore idle is still 1 and next mark_memory_idle()
fails.
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20220926082923.299554-1-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull coredump fix from Al Viro:
"Fix for breakage in dump_user_range()"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
[coredump] don't use __kernel_write() on kmap_local_page()
A brown paper bag where -Wno-error=deprecated-declarations was added
from compiler output when the right thing is to add
-Wno-deprecated-declarations, fix it.
Fixes: 4ee3c4da8b ("perf scripting python: Do not build fail on deprecation warnings")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
clang 15 now warns:
46 65.20 fedora:rawhide : FAIL clang version 15.0.0 (Fedora 15.0.0-3.fc38)
util/parse-events-bison.c:1401:9: error: variable 'parse_events_nerrs' set but not used [-Werror,-Wunused-but-set-variable]
int yynerrs = 0;
^
#define yynerrs parse_events_nerrs
^
1 error generated.
make[3]: *** [/git/perf-6.0.0-rc7/tools/build/Makefile.build:139: util] Error 2
Just ignore one more compiler warning for the bison generated C code.
Committer notes:
Older clangs don't know about -Wunused-but-set-variable, so we need to
add -Wno-unknown-warning-option to avoid this:
37 44.92 fedora:32 : FAIL clang version 10.0.1 (Fedora 10.0.1-3.fc32)
error: unknown warning option '-Wno-unused-but-set-variable'; did you mean '-Wno-unused-const-variable'? [-Werror,-Wunknown-warning-option]
make[3]: *** [/git/perf-6.0.0-rc7/tools/build/Makefile.build:139: util] Error 2
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/20220929140514.226807-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull networking fixes from Paolo Abeni:
"Including fixes from wifi and can.
Current release - regressions:
- phy: don't WARN for PHY_UP state in mdio_bus_phy_resume()
- wifi: fix locking in mac80211 mlme
- eth:
- revert "net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()"
- mlxbf_gige: fix an IS_ERR() vs NULL bug in mlxbf_gige_mdio_probe
Previous releases - regressions:
- wifi: fix regression with non-QoS drivers
Previous releases - always broken:
- mptcp: fix unreleased socket in accept queue
- wifi:
- don't start TX with fq->lock to fix deadlock
- fix memory corruption in minstrel_ht_update_rates()
- eth:
- macb: fix ZynqMP SGMII non-wakeup source resume failure
- mt7531: only do PLL once after the reset
- usbnet: fix memory leak in usbnet_disconnect()
Misc:
- usb: qmi_wwan: add new usb-id for Dell branded EM7455"
* tag 'net-6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (30 commits)
mptcp: fix unreleased socket in accept queue
mptcp: factor out __mptcp_close() without socket lock
net: ethernet: mtk_eth_soc: fix mask of RX_DMA_GET_SPORT{,_V2}
net: mscc: ocelot: fix tagged VLAN refusal while under a VLAN-unaware bridge
can: c_can: don't cache TX messages for C_CAN cores
ice: xsk: drop power of 2 ring size restriction for AF_XDP
ice: xsk: change batched Tx descriptor cleaning
net: usb: qmi_wwan: Add new usb-id for Dell branded EM7455
selftests: Fix the if conditions of in test_extra_filter()
net: phy: Don't WARN for PHY_UP state in mdio_bus_phy_resume()
net: stmmac: power up/down serdes in stmmac_open/release
wifi: mac80211: mlme: Fix double unlock on assoc success handling
wifi: mac80211: mlme: Fix missing unlock on beacon RX
wifi: mac80211: fix memory corruption in minstrel_ht_update_rates()
wifi: mac80211: fix regression with non-QoS drivers
wifi: mac80211: ensure vif queues are operational after start
wifi: mac80211: don't start TX with fq->lock to fix deadlock
wifi: cfg80211: fix MCS divisor value
net: hippi: Add missing pci_disable_device() in rr_init_one()
net/mlxbf_gige: Fix an IS_ERR() vs NULL bug in mlxbf_gige_mdio_probe
...
Pull input fixes from Dmitry Torokhov:
- small fixes for iqs62x-keys and melfas_mip4 drivers
- corrected register address in snvs_pwrkey driver
- Synaptic driver will stop trying to use intertouch (native) mode on
some Lenovo AMD devices
* tag 'input-for-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: snvs_pwrkey - fix SNVS_HPVIDR1 register address
Input: synaptics - disable Intertouch for Lenovo T14 and P14s AMD G1
Input: iqs62x-keys - drop unused device node references
Input: melfas_mip4 - fix return value check in mip4_probe()
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.1
- fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices
(Michael Kelley)
- disable Write Zeroes on Phison E3C/E4C (Tina Hsu)"
* tag 'nvme-6.0-2022-09-29' of git://git.infradead.org/nvme:
nvme-pci: disable Write Zeroes on Phison E3C/E4C
nvme: Fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices
[Why]
Enabling Z10 optimizations allows DMUB to disable the OTG during PSR
link-off. This theoretically saves power by putting more of the display
hardware to sleep. However, we observe that with PSR SU, it causes
visual artifacts, higher power usage, and potential system hang.
This is partly due to an odd behavior with the VStartup interrupt used
to signal DRM vblank events. If the OTG is toggled on/off during a PSR
link on/off cycle, the vstartup interrupt fires twice in quick
succession. This generates incorrectly timed vblank events.
Additionally, it can cause cursor updates to generate visual artifacts.
Note that this is not observed with PSR1 since PSR is fully disabled
when there are vblank event requestors. Cursor updates are also
artifact-free, likely because there are no selectively-updated (SU)
frames that can generate artifacts.
[How]
A potential solution is to disable z10 idle optimizations only when fast
updates (flips & cursor updates) are committed. A mechanism to do so
would require some thoughtful design. Let's just disable idle
optimizations for PSR2 for now.
Fixes: 7cc191ee76 ("drm/amd/display: Implement MPO PSR SU")
Reported-by: August Wikerfors <git@augustwikerfors.se>
Link: https://lore.kernel.org/r/c1f8886a-5624-8f49-31b1-e42b6d20dcf5@augustwikerfors.se/
Tested-by: August Wikerfors <git@augustwikerfors.se>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We were just checking for the 'err' variable, when we should really see
if there was some of the many checked errors that don't stop the test
right away.
Detected with clang 15.0.0:
44 75.23 fedora:37 : FAIL clang version 15.0.0 (Fedora 15.0.0-2.fc37)
tests/perf-record.c:68:16: error: variable 'errs' set but not used [-Werror,-Wunused-but-set-variable]
int err = -1, errs = 0, i, wakeups = 0;
^
1 error generated.
The patch introducing this 'perf test' entry had that check:
+ return (err < 0 || errs > 0) ? -1 : 0;
But at some point we lost that:
- return (err < 0 || errs > 0) ? -1 : 0;
+ if (err == -EACCES)
+ return TEST_SKIP;
+ if (err < 0)
+ return TEST_FAIL;
+ return TEST_OK
Put it back.
Fixes: 2cf88f4614 ("perf test: Use skip in PERF_RECORD_*")
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/YzR0n5QhsH9VyYB0@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull ATA fixes from Damien Le Moal:
"Three late patches to fix problems discovered recently:
- Add a horkage to disable link power management by default for the
Pioneer BDR-207M and BDR-205 DVD drives (from Niklas)
- Two patches to fix setting the maximum queue depth of libsas owned
ATA devices (from me)"
* tag 'ata-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-sata: Fix device queue depth control
ata: libata-scsi: Fix initialization of device queue depth
libata: add ATA_HORKAGE_NOLPM for Pioneer BDR-207M and BDR-205
Pull LoongArch fixes from Huacai Chen:
"Some trivial fixes and cleanup"
* tag 'loongarch-fixes-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Clean up loongson3_smp_ops declaration
LoongArch: Fix and cleanup csr_era handling in do_ri()
LoongArch: Align the address of kernel_entry to 4KB
Since loongson3_smp_ops is not used in LoongArch anymore, let's remove
it for cleanup.
Fixes: f2ac457a61 ("LoongArch: Add CPU definition headers")
Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
We don't emulate reserved instructions and just send a signal to the
current process now. So we don't need to call compute_return_era() to
add 4 (point to the next instruction) to csr_era in pt_regs. RA/ERA's
backup/restore is cleaned up as well.
Signed-off-by: Jun Yi <yijun@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Align the address of kernel_entry to 4KB, to avoid early tlb miss
exception in case the entry code crosses page boundary.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Mat Martineau says:
====================
mptcp: Properly clean up unaccepted subflows
Patch 1 factors out part of the mptcp_close() function for use by a caller
that already owns the socket lock. This is a prerequisite for patch 2.
Patch 2 is the fix that fully cleans up the unaccepted subflow sockets.
====================
Link: https://lore.kernel.org/r/20220927193158.195729-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mptcp socket and its subflow sockets in accept queue can't be
released after the process exit.
While the release of a mptcp socket in listening state, the
corresponding tcp socket will be released too. Meanwhile, the tcp
socket in the unaccept queue will be released too. However, only init
subflow is in the unaccept queue, and the joined subflow is not in the
unaccept queue, which makes the joined subflow won't be released, and
therefore the corresponding unaccepted mptcp socket will not be released
to.
This can be reproduced easily with following steps:
1. create 2 namespace and veth:
$ ip netns add mptcp-client
$ ip netns add mptcp-server
$ sysctl -w net.ipv4.conf.all.rp_filter=0
$ ip netns exec mptcp-client sysctl -w net.mptcp.enabled=1
$ ip netns exec mptcp-server sysctl -w net.mptcp.enabled=1
$ ip link add red-client netns mptcp-client type veth peer red-server \
netns mptcp-server
$ ip -n mptcp-server address add 10.0.0.1/24 dev red-server
$ ip -n mptcp-server address add 192.168.0.1/24 dev red-server
$ ip -n mptcp-client address add 10.0.0.2/24 dev red-client
$ ip -n mptcp-client address add 192.168.0.2/24 dev red-client
$ ip -n mptcp-server link set red-server up
$ ip -n mptcp-client link set red-client up
2. configure the endpoint and limit for client and server:
$ ip -n mptcp-server mptcp endpoint flush
$ ip -n mptcp-server mptcp limits set subflow 2 add_addr_accepted 2
$ ip -n mptcp-client mptcp endpoint flush
$ ip -n mptcp-client mptcp limits set subflow 2 add_addr_accepted 2
$ ip -n mptcp-client mptcp endpoint add 192.168.0.2 dev red-client id \
1 subflow
3. listen and accept on a port, such as 9999. The nc command we used
here is modified, which makes it use mptcp protocol by default.
$ ip netns exec mptcp-server nc -l -k -p 9999
4. open another *two* terminal and use each of them to connect to the
server with the following command:
$ ip netns exec mptcp-client nc 10.0.0.1 9999
Input something after connect to trigger the connection of the second
subflow. So that there are two established mptcp connections, with the
second one still unaccepted.
5. exit all the nc command, and check the tcp socket in server namespace.
And you will find that there is one tcp socket in CLOSE_WAIT state
and can't release forever.
Fix this by closing all of the unaccepted mptcp socket in
mptcp_subflow_queue_clean() with __mptcp_close().
Now, we can ensure that all unaccepted mptcp sockets will be cleaned by
__mptcp_close() before they are released, so mptcp_sock_destruct(), which
is used to clean the unaccepted mptcp socket, is not needed anymore.
The selftests for mptcp is ran for this commit, and no new failures.
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Fixes: 6aeed90450 ("mptcp: fix race on unaccepted mptcp sockets")
Cc: stable@vger.kernel.org
Reviewed-by: Jiang Biao <benbjiang@tencent.com>
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
ice: xsk: ZC changes
Maciej Fijalkowski says:
This set consists of two fixes to issues that were either pointed out on
indirectly (John was reviewing AF_XDP selftests that were testing ice's
ZC support) mailing list or were directly reported by customers.
First patch allows user space to see done descriptor in CQ even after a
single frame being transmitted and second patch removes the need for
having HW rings sized to power of 2 number of descriptors when used
against AF_XDP.
I also forgot to mention that due to the current Tx cleaning algorithm,
4k HW ring was broken and these two patches bring it back to life, so we
kill two birds with one stone.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: xsk: drop power of 2 ring size restriction for AF_XDP
ice: xsk: change batched Tx descriptor cleaning
====================
Link: https://lore.kernel.org/r/20220927164112.4011983-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the following set of commands fails:
$ ip link add br0 type bridge # vlan_filtering 0
$ ip link set swp0 master br0
$ bridge vlan
port vlan-id
swp0 1 PVID Egress Untagged
$ bridge vlan add dev swp0 vid 10
Error: mscc_ocelot_switch_lib: Port with more than one egress-untagged VLAN cannot have egress-tagged VLANs.
Dumping ocelot->vlans, one can see that the 2 egress-untagged VLANs on swp0 are
vid 1 (the bridge PVID) and vid 4094, a PVID used privately by the driver for
VLAN-unaware bridging. So this is why bridge vid 10 is refused, despite
'bridge vlan' showing a single egress untagged VLAN.
As mentioned in the comment added, having this private VLAN does not impose
restrictions to the hardware configuration, yet it is a bookkeeping problem.
There are 2 possible solutions.
One is to make the functions that operate on VLAN-unaware pvids:
- ocelot_add_vlan_unaware_pvid()
- ocelot_del_vlan_unaware_pvid()
- ocelot_port_setup_dsa_8021q_cpu()
- ocelot_port_teardown_dsa_8021q_cpu()
call something different than ocelot_vlan_member_(add|del)(), the latter being
the real problem, because it allocates a struct ocelot_bridge_vlan *vlan which
it adds to ocelot->vlans. We don't really *need* the private VLANs in
ocelot->vlans, it's just that we have the extra convenience of having the
vlan->portmask cached in software (whereas without these structures, we'd have
to create a raw ocelot_vlant_rmw_mask() procedure which reads back the current
port mask from hardware).
The other solution is to filter out the private VLANs from
ocelot_port_num_untagged_vlans(), since they aren't what callers care about.
We only need to do this to the mentioned function and not to
ocelot_port_num_tagged_vlans(), because private VLANs are never egress-tagged.
Nothing else seems to be broken in either solution, but the first one requires
more rework which will conflict with the net-next change 36a0bf4435 ("net:
mscc: ocelot: set up tag_8021q CPU ports independent of user port affinity"),
and I'd like to avoid that. So go with the other one.
Fixes: 54c3198460 ("net: mscc: ocelot: enforce FDB isolation when VLAN-unaware")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220927122042.1100231-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is build warning when CONFIG_OF is not selected.
>> drivers/clk/imx/clk-imx93.c:324:34: warning: 'imx93_clk_of_match'
>> defined but not used [-Wunused-const-variable=]
324 | static const struct of_device_id imx93_clk_of_match[] = {
| ^~~~~~~~~~~~~~~~~~
The driver only support DT table, no sense to use of_match_ptr.
Fixes: 24defbe194 ("clk: imx: add i.MX93 clk")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20220830033137.4149542-3-peng.fan@oss.nxp.com
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
After commit 31fd9b79dc ("ARM: dts: BCM5301X: update CRU block
description") a warning from clk-iproc-pll.c was generated due to a
duplicate PLL name as well as the console stopped working. Upon closer
inspection it became clear that iproc_pll_clk_setup() used the Device
Tree node unit name as an unique identifier as well as a parent name to
parent all clocks under the PLL.
BCM5301X was the first platform on which that got noticed because of the
DT node unit name renaming but the same assumptions hold true for any
user of the iproc_pll_clk_setup() function.
The first 'clock-output-names' property is always guaranteed to be
unique as well as providing the actual desired PLL clock name, so we
utilize that to register the PLL and as a parent name of all children
clock.
Fixes: 5fe225c105 ("clk: iproc: add initial common clock support")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Link: https://lore.kernel.org/r/20220905161504.1526-1-f.fainelli@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Stefan reports that there are issues with the level triggered
notification. Since we're late in the cycle, and it was introduced for
the 6.0 release, just disable it at prep time and we can bring this
back when Samba is happy with it.
Reported-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In commit 4167ac8a65 ("clk: sunxi-ng: sun50i: h6: Modify GPU clock
configuration to support DFS") divider M0 was forced to be 1 in order to
support DFS. However, that left N as it is, at high value of 36. On
boards without devfreq enabled (all of them in kernel 6.0), this
effectively sets GPU frequency to 864 MHz. This is about 100 MHz above
maximum supported frequency.
In order to fix this, let's set N to 18 (register value 17). That way
default frequency of 432 MHz is preserved.
Fixes: 4167ac8a65 ("clk: sunxi-ng: sun50i: h6: Modify GPU clock configuration to support DFS")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220928200122.3963509-1-jernej.skrabec@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Register GT0_PERF_LIMIT_REASONS (0x1381a8) is available only for
Gen11+. Therefore ensure perf_limit_reasons sysfs files are created only
for Gen11+. Otherwise on Gen < 5 accessing these files results in the
following oops:
<1> [88.829420] BUG: unable to handle page fault for address: ffffc90000bb81a8
<1> [88.829438] #PF: supervisor read access in kernel mode
<1> [88.829447] #PF: error_code(0x0000) - not-present page
This patch is a backport of the drm-tip commit 0d2d201095
("drm/i915: Perf_limit_reasons are only available for Gen11+") to
drm-intel-fixes. The backport is not identical to the original, it only
includes the sysfs portions of if. The debugfs portion is not available
in drm-intel-fixes so has not been backported.
Bspec: 20008
Bug: https://gitlab.freedesktop.org/drm/intel/-/issues/6863
Fixes: fa68bff7cf ("drm/i915/gt: Add sysfs throttle frequency interfaces")
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220919162401.2077713-1-ashutosh.dixit@intel.com
(backported from commit 0d2d201095)
There is no dedicate parent clock for QSPI so SET_RATE_PARENT flag
should not be used. For instance, the default parent clock for QSPI is
pll2_bus, which is also the parent clock for quite a few modules, such
as MMDC, once GPMI NAND set clock rate for EDO5 mode can cause system
hang due to pll2_bus rate changed.
Fixes: f1541e15e3 ("clk: imx6sx: Switch to clk_hw based API")
Signed-off-by: Han Xu <han.xu@nxp.com>
Link: https://lore.kernel.org/r/20220915150959.3646702-1-han.xu@nxp.com
Tested-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Pull more irqchip fixes from Borislav Petkov:
"More irqchip fixes for 6.0 from Marc Zyngier. Stuff got left hanging
due to the whole Plumbers and vacations commotion.
- A couple of configuration fixes for the recently merged Loongarch
drivers
- A fix to avoid dynamic allocation of a cpumask which was causing
issues with PREEMPT_RT and the GICv3 ITS
- A tightening of an error check in the stm32 exti driver"
* tag 'irq_urgent_for_v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/loongson-pch-lpc: Add dependence on LoongArch
irqchip: Select downstream irqchip drivers for LoongArch CPU
irqchip/gic-v3-its: Remove cpumask_var_t allocation
irqchip/stm32-exti: Remove check on always false condition
Pull MMC fixes from Ulf Hansson:
"A couple of MMC fixes. This time there is also a fix for the ARM SCMI
firmware driver, which has been acked by Sudeep Holla, the maintainer.
MMC core:
- Terminate infinite loop in SD-UHS voltage switch
MMC host:
- hsq: Fix kernel crash in the recovery path
- moxart: Fix bus width configurations
- sdhci: Fix kernel panic for cqe irq
ARM_SCMI:
- Fixup clock management by reverting 'firmware: arm_scmi: Add clock
management to the SCMI power domain'"
* tag 'mmc-v6.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: hsq: Fix data stomping during mmc recovery
Revert "firmware: arm_scmi: Add clock management to the SCMI power domain"
mmc: core: Terminate infinite loop in SD-UHS voltage switch
mmc: moxart: fix 4-bit bus width and remove 8-bit bus width
mmc: sdhci: Fix host->cmd is null
passing kmap_local_page() result to __kernel_write() is unsafe -
random ->write_iter() might (and 9p one does) get unhappy when
passed ITER_KVEC with pointer that came from kmap_local_page().
Fix by providing a variant of __kernel_write() that takes an iov_iter
from caller (__kernel_write() becomes a trivial wrapper) and adding
dump_emit_page() that parallels dump_emit(), except that instead of
__kernel_write() it uses __kernel_write_iter() with ITER_BVEC source.
Fixes: 3159ed5779 "fs/coredump: use kmap_local_page()"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Pull Microchip clock fixes for Polarfire SoCs:
- fix panic at boot in clock initialization when building with clang-15
- make RTC's AHB clock critical as rtc will stop if the AHB
interface clock is disabled
* tag 'clk-microchip-fixes-6.0' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
clk: microchip: mpfs: make the rtc's ahb clock critical
clk: microchip: mpfs: fix clk_cfg array bounds violation
Marc Kleine-Budde says:
====================
pull-request: can 2022-09-28
The patch is by me and targets the c_can driver. It disables an
optimization in the TX path of C_CAN cores which causes problems.
* tag 'linux-can-fixes-for-6.0-20220928' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: c_can: don't cache TX messages for C_CAN cores
====================
Link: https://lore.kernel.org/r/20220928090629.1124190-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On a CONFIG_SMP=n kernel, the LLC shared mask is 0, which prevents
__cache_amd_cpumap_setup() from doing the L3 masks setup, and more
specifically from setting up the shared_cpu_map and shared_cpu_list
files in sysfs, leading to lscpu from util-linux getting confused and
segfaulting.
Add a cpu_llc_shared_mask() UP variant which returns a mask with a
single bit set, i.e., for CPU0.
Fixes: 2b83809a5e ("x86/cpu/amd: Derive L3 shared_cpu_map from cpu_llc_shared_mask")
Reported-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1660148115-302-1-git-send-email-ssengar@linux.microsoft.com
The testcase “vmlinux-kallsyms.c” fails in powerpc.
vmlinux symtab matches kallsyms: FAILED!
This test look at the symbols in the vmlinux DSO and check if we find
all of them in the kallsyms dso.
But from the powerpc logs , observed that the failure happens for:
ERR : 0xc0000000000fe9c8: .Lmfspr_table not on kallsyms
ERR : 0xc0000000001009c8: .Lmtspr_table not on kallsyms
These are labels ( with .L) in the source code and has to be ignored.
Reference code with .Lmtspr_table: arch/powerpc/xmon/spr_access.S
The testcases invokes is_ignored_symbol() function to ignore hidden
symbols in the dso like local symbols. This function is adapted from
is_ignored_symbol() kernel function in code: scripts/kallsyms.c . The
kernel function got some updates which is not reflected in the testcase
function and the new updates also handles ignoring "labels".
Below is the changes that went in the kernel function.
/* Symbol names that begin with the following are ignored.*/
static const char * const ignored_prefixes[] = {
"$", /* local symbols for ARM, MIPS, etc. */
- ".LASANPC", /* s390 kasan local symbols */
+ ".L", /* local labels, .LBB,.Ltmpxxx,.L__unnamed_xx,.LASANPC, etc. */
"__crc_", /* modversions */
"__efistub_", /* arm64 EFI stub namespace */
- "__kvm_nvhe_", /* arm64 non-VHE KVM namespace */
+ "__kvm_nvhe_$", /* arm64 local symbols in non-VHE KVM namespace */
+ "__kvm_nvhe_.L", /* arm64 local symbols in non-VHE KVM namespace */
"__AArch64ADRPThunk_", /* arm64 lld */
"__ARMV5PILongThunk_", /* arm lld */
"__ARMV7PILongThunk_",
This change is part of below commits and will handle the
symbols with “.L”
commit d4c8586432 ("kallsyms: ignore all local labels prefixed by '.L'")
commit 6ccf9cb557 ("KVM: arm64: Symbolize the nVHE HYP addresses")
Update the testcase function to include the new changes.
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220928045218.37322-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The function __ata_change_queue_depth() uses the helper
ata_scsi_find_dev() to get the ata_device structure of a scsi device and
set that device maximum queue depth. However, when the ata device is
managed by libsas, ata_scsi_find_dev() returns NULL, turning
__ata_change_queue_depth() into a nop, which prevents the user from
setting the maximum queue depth of ATA devices used with libsas based
HBAs.
Fix this by renaming __ata_change_queue_depth() to
ata_change_queue_depth() and adding a pointer to the ata_device
structure of the target device as argument. This pointer is provided by
ata_scsi_change_queue_depth() using ata_scsi_find_dev() in the case of
a libata managed device and by sas_change_queue_depth() using
sas_to_ata_dev() in the case of a libsas managed ata device.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: John Garry <john.garry@huawei.com>
For SATA devices supporting NCQ, drivers using libsas first initialize a
scsi device queue depth based on the controller and device capabilities,
leading to the scsi device queue_depth field being 32 (ATA maximum queue
depth) for most setup. However, if libata was loaded using the
force=[ID]]noncq argument, the default queue depth should be set to 1 to
reflect the fact that queuable commands will never be used. This is
consistent with manually setting a device queue depth to 1 through sysfs
as that disables NCQ use for the device.
Fix ata_scsi_dev_config() to honor the noncq parameter by sertting the
device queue depth to 1 for devices that do not have the ATA_DFLAG_NCQ
flag set.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Tested-by: John Garry <john.garry@huawei.com>
Pull ARM SoC fixes from Arnd Bergmann:
"This should be the last set of bugfixes in the SoC tree:
- Two fixes for Arm integrator, dealing with a regression caused by
invalid DT properties combined with a change in dma address
translation, and missing device_type annotations on the PCI bus
- Fixes for drivers/reset/, addressing bugs in i.MX8MP, Sparx5 and
NPCM8XX platforms
- Bjorn Andersson's email address changes in the MAINTAINERS file
- Multiple minor fixes to Qualcomm dts files, and a change to the
remoteproc firmware filename that did not match the actual path in
the linux-firmware package
- Minor code fixes for the Allwinner/sunxi SRAM driver, and the
broadcom STB Bus Interface Unit driver
- A build fix for the sunplus sp7021 platform
- Two dts fixes for TI OMAP family SoCs, addressing an extraneous
usb4 device node and an incorrect DMA handle"
* tag 'soc-fixes-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: integrator: Fix DMA ranges
ARM: dts: integrator: Tag PCI host with device_type
ARM: sunplus: fix serial console kconfig and build problems
reset: npcm: fix iprst2 and iprst4 setting
arm64: dts: qcom: sm8350: fix UFS PHY serdes size
soc: bcm: brcmstb: biuctrl: Avoid double of_node_put()
arm64: dts: qcom: sc8280xp-x13s: Update firmware location
soc: sunxi: sram: Fix debugfs info for A64 SRAM C
soc: sunxi: sram: Fix probe function ordering issues
soc: sunxi: sram: Prevent the driver from being unbound
soc: sunxi: sram: Actually claim SRAM regions
ARM: dts: am5748: keep usb4_tm disabled
reset: microchip-sparx5: issue a reset on startup
reset: imx7: Fix the iMX8MP PCIe PHY PERST support
MAINTAINERS: Update Bjorn's email address
arm64: dts: qcom: sc7280: move USB wakeup-source property
arm64: dts: qcom: thinkpad-x13s: Fix firmware location
arm64: dts: qcom: sm8150: Fix fastrpc iommu values
ARM: dts: am33xx: Fix MMCHS0 dma properties
RQT objects require that a power of two value be configured for both
rqt_max_size and rqt_actual size.
For create_rqt, make sure to round up to the power of two the value of
given by the user who created the vdpa device and given by
ndev->rqt_size. The actual size is also rounded up to the power of two
using the current number of VQs given by ndev->cur_num_vqs.
Same goes with modify_rqt where we need to make sure act size is power
of two based on the new number of QPs.
Without this patch, attempt to create a device with non power of two QPs
would result in error from firmware.
Fixes: 52893733f2 ("vdpa/mlx5: Add multiqueue support")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220912125019.833708-1-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix virtio test compilation failure caused by vq reset.
../../drivers/virtio/virtio_ring.c: In function ‘vring_create_virtqueue_packed’:
../../drivers/virtio/virtio_ring.c:1999:8: error: ‘struct virtqueue’ has no member named ‘reset’
1999 | vq->vq.reset = false;
| ^
../../drivers/virtio/virtio_ring.c: In function ‘__vring_new_virtqueue’:
../../drivers/virtio/virtio_ring.c:2493:8: error: ‘struct virtqueue’ has no member named ‘reset’
2493 | vq->vq.reset = false;
| ^
../../drivers/virtio/virtio_ring.c: In function ‘virtqueue_resize’:
../../drivers/virtio/virtio_ring.c:2587:18: error: ‘struct virtqueue’ has no member named ‘num_max’
2587 | if (num > vq->vq.num_max)
| ^
../../drivers/virtio/virtio_ring.c:2596:11: error: ‘struct virtio_device’ has no member named ‘config’
2596 | if (!vdev->config->disable_vq_and_reset)
| ^~
../../drivers/virtio/virtio_ring.c:2599:11: error: ‘struct virtio_device’ has no member named ‘config’
2599 | if (!vdev->config->enable_vq_after_reset)
| ^~
../../drivers/virtio/virtio_ring.c:2602:12: error: ‘struct virtio_device’ has no member named ‘config’
2602 | err = vdev->config->disable_vq_and_reset(_vq);
| ^~
../../drivers/virtio/virtio_ring.c:2614:10: error: ‘struct virtio_device’ has no member named ‘config’
2614 | if (vdev->config->enable_vq_after_reset(_vq))
| ^~
make: *** [<builtin>: virtio_ring.o] Error 1
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Message-Id: <20220830110549.103168-1-xuanzhuo@linux.alibaba.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fix memory-leak for virtio-crypto akcipher request, this problem is
introduced by 59ca6c93387d3(virtio-crypto: implement RSA algorithm).
The leak can be reproduced and tested with the following script
inside virtual machine:
#!/bin/bash
LOOP_TIMES=10000
# required module: pkcs8_key_parser, virtio_crypto
modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
modprobe virtio_crypto # if CONFIG_CRYPTO_DEV_VIRTIO=m
rm -rf /tmp/data
dd if=/dev/random of=/tmp/data count=1 bs=230
# generate private key and self-signed cert
openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem \
-outform der -out cert.der \
-subj "/C=CN/ST=GD/L=SZ/O=vihoo/OU=dev/CN=always.com/emailAddress=yy@always.com"
# convert private key from pem to der
openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der
# add key
PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s`
echo "priv key id = "$PRIV_KEY_ID
PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s`
echo "pub key id = "$PUB_KEY_ID
# query key
keyctl pkey_query $PRIV_KEY_ID 0
keyctl pkey_query $PUB_KEY_ID 0
# here we only run pkey_encrypt becasuse it is the fastest interface
function bench_pub() {
keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub
}
# do bench_pub in loop to obtain the memory leak
for (( i = 0; i < ${LOOP_TIMES}; ++i )); do
bench_pub
done
Signed-off-by: lei he <helei.sig11@bytedance.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Message-Id: <20220919075158.3625-1-helei.sig11@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
- Under SRIOV, we need to send REQ_GPU_FINI to the hypervisor
during the suspend time. Furthermore, we cannot request a
mode 1 reset under SRIOV as VF. Therefore, we will skip it
as it is called in suspend_noirq() function.
- In the resume code path, we need to send REQ_GPU_INIT to the
hypervisor and also resume PSP IP block under SRIOV.
Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The function amdgpu_fence_count_emitted used in work_hander should not call
amdgpu_fence_process which must be used in irq handler.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jiadong.Zhu <Jiadong.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current position calulated in gfx_v9_0_ring_emit_patch_cond_exec
underflows when the wptr is divisible by ring->buf_mask + 1.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jiadong.Zhu <Jiadong.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For individual feature testing, PMFW may not report all clock
values back. Driver will default them to 0 but this will
cause the BB table to be skipped and default to one state
with max clocks.
[How]
Add helper function to scan through initial clock values and
populate them with default clock limits so that BB table
can be built.
Add dpm_enabled flag to check when DPM is not enabled and
to trigger helper function.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Programming pixel rate divider when FIFO is enabled can cause FIFO error.
[How]
Skip divider programming when divider values are the same to prevent FIFO
error.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Revert "dc: skip audio setup when audio stream is enabled"
This reverts commit 65fbfb02c2
[why]
We have minimal pipe split transition method to avoid pipe
allocation outage.However, this method will invoke audio setup
which cause audio output stuck once pipe reallocate.
[how]
skip audio setup for pipelines which audio stream has been enabled
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
We rely on DMCUB to do this when disabling the link but it should
actually come before we disable the DP VID stream.
If we don't then the FIFO can end up with underflow that persists
the next time it's enabled.
[How]
Add a DCN314 specific blank sequence that will disable the DIG FIFO
first.
Reviewed-by: Syed Hassan <Syed.Hassan@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The DIO FIFO will underflow if we turn off the OTG before we turn
off the FIFO.
Since this happens as part of the OTG workaround and we don't reset
the FIFO afterwards we see the error persist.
[How]
Add disable FIFO before the disable CRTC and enable FIFO after enabling
the CRTC.
Reviewed-by: Syed Hassan <Syed.Hassan@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Avoids a race condition where DIO FIFO can underflow due to no incoming
data available.
[How]
Shift the FIFO enable below stream enable.
Make sure fullness level is written before the DIO reset takes place
and that we're not doing it twice.
Reviewed-by: Syed Hassan <Syed.Hassan@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Shader wave interrupts were getting dropped in event_interrupt_wq_v11
if the PRIV bit was set to 1. This would often lead to a hang. Until
debugger logic is upstreamed, expand comment to stop early return.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update mes_v11_api_def.h add_queue API with is_aql_queue parameter. Also
re-use gds_size for the queue size (unused for KFD). MES requires the
queue size in order to compute the actual wptr offset within the queue
RB since it increases monotonically for AQL queues.
v2: Make is_aql_queue assign clearer
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's vbios and pmfw instead of driver who decide whether some dpm features
is supported or not. Driver just de-selects those features which are not
permitted on user's request. Thus, we use adverse selects model.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I encountered some occasional crashes of poke_int3_handler() when
kprobes are set, while accessing desc->vec.
The text poke mechanism claims to have an RCU-like behavior, but it
does not appear that there is any quiescent state to ensure that
nobody holds reference to desc. As a result, the following race
appears to be possible, which can lead to memory corruption.
CPU0 CPU1
---- ----
text_poke_bp_batch()
-> smp_store_release(&bp_desc, &desc)
[ notice that desc is on
the stack ]
poke_int3_handler()
[ int3 might be kprobe's
so sync events are do not
help ]
-> try_get_desc(descp=&bp_desc)
desc = __READ_ONCE(bp_desc)
if (!desc) [false, success]
WRITE_ONCE(bp_desc, NULL);
atomic_dec_and_test(&desc.refs)
[ success, desc space on the stack
is being reused and might have
non-zero value. ]
arch_atomic_inc_not_zero(&desc->refs)
[ might succeed since desc points to
stack memory that was freed and might
be reused. ]
Fix this issue with small backportable patch. Instead of trying to
make RCU-like behavior for bp_desc, just eliminate the unnecessary
level of indirection of bp_desc, and hold the whole descriptor as a
global. Anyhow, there is only a single descriptor at any given
moment.
Fixes: 1f676247f3 ("x86/alternatives: Implement a better poke_int3_handler() completion scheme")
Signed-off-by: Nadav Amit <namit@vmware.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@kernel.org
Link: https://lkml.kernel.org/r/20220920224743.3089-1-namit@vmware.com
AF_XDP Tx descriptor cleaning in ice driver currently works in a "lazy"
way - descriptors are not cleaned immediately after send. We rather hold
on with cleaning until we see that free space in ring drops below
particular threshold. This was supposed to reduce the amount of
unnecessary work related to cleaning and instead of keeping the ring
empty, ring was rather saturated.
In AF_XDP realm cleaning Tx descriptors implies producing them to CQ.
This is a way of letting know user space that particular descriptor has
been sent, as John points out in [0].
We tried to implement serial descriptor cleaning which would be used in
conjunction with batched cleaning but it made code base more convoluted
and probably harder to maintain in future. Therefore we step away from
batched cleaning in a current form in favor of an approach where we set
RS bit on every last descriptor from a batch and clean always at the
beginning of ice_xmit_zc().
This means that we give up a bit of Tx performance, but this doesn't
hurt l2fwd scenario which is way more meaningful than txonly as this can
be treaten as AF_XDP based packet generator. l2fwd is not hurt due to
the fact that Tx side is much faster than Rx and Rx is the one that has
to catch Tx up.
FWIW Tx descriptors are still produced in a batched way.
[0]: https://lore.kernel.org/bpf/62b0a20232920_3573208ab@john.notmuch/
Fixes: 126cdfe100 ("ice: xsk: Improve AF_XDP ZC Tx and use batching API")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Both i.MX6 and i.MX8 reference manuals list 0xBF8 as SNVS_HPVIDR1
(chapters 57.9 and 6.4.5 respectively).
Without this, trying to read the revision number results in 0 on
all revisions, causing the i.MX6 quirk to apply on all platforms,
which in turn causes the driver to synthesise power button release
events instead of passing the real one as they happen even on
platforms like i.MX8 where that's not wanted.
Fixes: 1a26c92071 ("Input: snvs_pwrkey - send key events for i.MX6 S, DL and Q")
Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/4599101.ElGaqSPkdT@pliszka
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull sound fixes from Takashi Iwai:
"A few device-specific fixes, mostly for ASoC. All look small / trivial
enough"
* tag 'sound-6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: intel-dsp-config: add missing RaptorLake PCI IDs
ASoC: tas2770: Reinit regcache on reset
ASoC: nau8824: Fix semaphore is released unexpectedly
ASoC: Intel: sof_sdw: add support for Dell SKU 0AFF
ASoC: imx-card: Fix refcount issue with of_node_put
ASoC: rt5640: Fix the issue of the abnormal JD2 status
Pull more irqchip fixes for 6.0 from Marc Zyngier:
- A couple of configuration fixes for the recently merged Loongarch drivers
- A fix to avoid dynamic allocation of a cpumask which was causing issues
with PREEMPT_RT and the GICv3 ITS
- A tightening of an error check in the stm32 exti driver
Link: https://lore.kernel.org/r/20220916085158.2592518-1-maz@kernel.org
Skip selftests that require EPT support in the VM when it is not
available. For example, if running on a machine where kvm_intel.ept=N
since KVM does not offer EPT support to guests if EPT is not supported
on the host.
This commit causes vmx_dirty_log_test to be skipped instead of failing
on hosts where kvm_intel.ept=N.
Signed-off-by: David Matlack <dmatlack@google.com>
Message-Id: <20220926171457.532542-1-dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The block device uses multiple queues to access emmc. There will be up to 3
requests in the hsq of the host. The current code will check whether there
is a request doing recovery before entering the queue, but it will not check
whether there is a request when the lock is issued. The request is in recovery
mode. If there is a request in recovery, then a read and write request is
initiated at this time, and the conflict between the request and the recovery
request will cause the data to be trampled.
Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com>
Fixes: 511ce378e1 ("mmc: Add MMC host software queue support")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220916090506.10662-1-wenchao.chen666@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The UAS mode of Hiksemi USB_HDD is reported to fail to work on several
platforms with the following error message, then after re-connecting the
device will be offlined and not working at all.
[ 592.518442][ 2] sd 8:0:0:0: [sda] tag#17 uas_eh_abort_handler 0 uas-tag 18
inflight: CMD
[ 592.527575][ 2] sd 8:0:0:0: [sda] tag#17 CDB: Write(10) 2a 00 03 6f 88 00 00
04 00 00
[ 592.536330][ 2] sd 8:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1
inflight: CMD
[ 592.545266][ 2] sd 8:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 07 44 1a 88 00
00 08 00
These disks have a broken uas implementation, the tag field of the status
iu-s is not set properly,so we need to fall-back to usb-storage.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Link: https://lore.kernel.org/r/1663901185-21067-1-git-send-email-zenghongling@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The UAS mode of Hiksemi is reported to fail to work on several platforms
with the following error message, then after re-connecting the device will
be offlined and not working at all.
[ 592.518442][ 2] sd 8:0:0:0: [sda] tag#17 uas_eh_abort_handler 0 uas-tag 18
inflight: CMD
[ 592.527575][ 2] sd 8:0:0:0: [sda] tag#17 CDB: Write(10) 2a 00 03 6f 88 00 00
04 00 00
[ 592.536330][ 2] sd 8:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1
inflight: CMD
[ 592.545266][ 2] sd 8:0:0:0: [sda] tag#0 CDB: Write(10) 2a 00 07 44 1a 88 00
00 08 00
These disks have a broken uas implementation, the tag field of the status
iu-s is not set properly,so we need to fall-back to usb-storage.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@kernel.org>
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Link: https://lore.kernel.org/r/1663901173-21020-1-git-send-email-zenghongling@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mika writes:
"thunderbolt: Fix for v6.0 final
This includes a single fix from Mario that resets the plug event delay
back to the USB4 spec value.
This has been in linux-next with no reported issues."
* tag 'thunderbolt-for-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Explicitly reset plug events delay back to USB4 spec value
This commit fixes DMA engine reset timeout issue in suspend/resume
with ADLink I-Pi SMARC Plus board which dmesg shows:
...
[ 54.678271] PM: suspend exit
[ 54.754066] intel-eth-pci 0000:00:1d.2 enp0s29f2: PHY [stmmac-3:01] driver [Maxlinear Ethernet GPY215B] (irq=POLL)
[ 54.755808] intel-eth-pci 0000:00:1d.2 enp0s29f2: Register MEM_TYPE_PAGE_POOL RxQ-0
...
[ 54.780482] intel-eth-pci 0000:00:1d.2 enp0s29f2: Register MEM_TYPE_PAGE_POOL RxQ-7
[ 55.784098] intel-eth-pci 0000:00:1d.2: Failed to reset the dma
[ 55.784111] intel-eth-pci 0000:00:1d.2 enp0s29f2: stmmac_hw_setup: DMA engine initialization failed
[ 55.784115] intel-eth-pci 0000:00:1d.2 enp0s29f2: stmmac_open: Hw setup failed
...
The issue is related with serdes which impacts clock. There is
serdes in ADLink I-Pi SMARC board ethernet controller. Please refer to
commit b9663b7ca6 ("net: stmmac: Enable SERDES power up/down sequence")
for detial. When issue is reproduced, DMA engine clock is not ready
because serdes is not powered up.
To reproduce DMA engine reset timeout issue with hardware which has
serdes in GBE controller, install Ubuntu. In Ubuntu GUI, click
"Power Off/Log Out" -> "Suspend" menu, it disables network interface,
then goes to sleep mode. When it wakes up, it enables network
interface again. Stmmac driver is called in this way:
1. stmmac_release: Stop network interface. In this function, it
disables DMA engine and network interface;
2. stmmac_suspend: It is called in kernel suspend flow. But because
network interface has been disabled(netif_running(ndev) is
false), it does nothing and returns directly;
3. System goes into S3 or S0ix state. Some time later, system is
waken up by keyboard or mouse;
4. stmmac_resume: It does nothing because network interface has
been disabled;
5. stmmac_open: It is called to enable network interace again. DMA
engine is initialized in this API, but serdes is not power on so
there will be DMA engine reset timeout issue.
Similarly, serdes powerdown should be added in stmmac_release.
Network interface might be disabled by cmd "ifconfig eth0 down",
DMA engine, phy and mac have been disabled in ndo_stop callback,
serdes should be powered down as well. It doesn't make sense that
serdes is on while other components have been turned off.
If ethernet interface is in enabled state(netif_running(ndev) is true)
before suspend/resume, the issue couldn't be reproduced because serdes
could be powered up in stmmac_resume.
Because serdes_powerup is added in stmmac_open, it doesn't need to be
called in probe function.
Fixes: b9663b7ca6 ("net: stmmac: Enable SERDES power up/down sequence")
Signed-off-by: Junxiao Chang <junxiao.chang@intel.com>
Reviewed-by: Voon Weifeng <weifeng.voon@intel.com>
Tested-by: Jimmy JS Chen <jimmyjs.chen@adlinktech.com>
Tested-by: Looi, Hong Aun <hong.aun.looi@intel.com>
Link: https://lore.kernel.org/r/20220923050448.1220250-1-junxiao.chang@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 6911458dc4 ("wifi: mac80211: mlme: refactor assoc success
handling") moved the per-link setup out of ieee80211_assoc_success() into a
new function ieee80211_assoc_config_link() but missed to remove the unlock
of 'sta_mtx' in case of HE capability/operation missing on HE AP, which
leads to a double unlock:
ieee80211_assoc_success() {
...
ieee80211_assoc_config_link() {
...
if (!(link->u.mgd.conn_flags & IEEE80211_CONN_DISABLE_HE) &&
(!elems->he_cap || !elems->he_operation)) {
mutex_unlock(&sdata->local->sta_mtx);
...
}
...
}
...
mutex_unlock(&sdata->local->sta_mtx);
...
}
Fixes: 6911458dc4 ("wifi: mac80211: mlme: refactor assoc success handling")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Link: https://lore.kernel.org/r/20220925143420.784975-1-rafaelmendsr@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During our testing of WFM200 module over SDIO on i.MX6Q-based platform,
we discovered a memory corruption on the system, tracing back to the wfx
driver. Using kfence, it was possible to trace it back to the root
cause, which is hw->max_rates set to 8 in wfx_init_common,
while the maximum defined by IEEE80211_TX_TABLE_SIZE is 4.
This causes array out-of-bounds writes during updates of the rate table,
as seen below:
BUG: KFENCE: memory corruption in kfree_rcu_work+0x320/0x36c
Corrupted memory at 0xe0a4ffe0 [ 0x03 0x03 0x03 0x03 0x01 0x00 0x00
0x02 0x02 0x02 0x09 0x00 0x21 0xbb 0xbb 0xbb ] (in kfence-#81):
kfree_rcu_work+0x320/0x36c
process_one_work+0x3ec/0x920
worker_thread+0x60/0x7a4
kthread+0x174/0x1b4
ret_from_fork+0x14/0x2c
0x0
kfence-#81: 0xe0a4ffc0-0xe0a4ffdf, size=32, cache=kmalloc-64
allocated by task 297 on cpu 0 at 631.039555s:
minstrel_ht_update_rates+0x38/0x2b0 [mac80211]
rate_control_tx_status+0xb4/0x148 [mac80211]
ieee80211_tx_status_ext+0x364/0x1030 [mac80211]
ieee80211_tx_status+0xe0/0x118 [mac80211]
ieee80211_tasklet_handler+0xb0/0xe0 [mac80211]
tasklet_action_common.constprop.0+0x11c/0x148
__do_softirq+0x1a4/0x61c
irq_exit+0xcc/0x104
call_with_stack+0x18/0x20
__irq_svc+0x80/0xb0
wq_worker_sleeping+0x10/0x100
wq_worker_sleeping+0x10/0x100
schedule+0x50/0xe0
schedule_timeout+0x2e0/0x474
wait_for_completion+0xdc/0x1ec
mmc_wait_for_req_done+0xc4/0xf8
mmc_io_rw_extended+0x3b4/0x4ec
sdio_io_rw_ext_helper+0x290/0x384
sdio_memcpy_toio+0x30/0x38
wfx_sdio_copy_to_io+0x88/0x108 [wfx]
wfx_data_write+0x88/0x1f0 [wfx]
bh_work+0x1c8/0xcc0 [wfx]
process_one_work+0x3ec/0x920
worker_thread+0x60/0x7a4
kthread+0x174/0x1b4
ret_from_fork+0x14/0x2c 0x0
After discussion on the wireless mailing list it was clarified
that the issue has been introduced by:
commit ee0e16ab75 ("mac80211: minstrel_ht: fill all requested rates")
and fix shall be in minstrel_ht_update_rates in rc80211_minstrel_ht.c.
Fixes: ee0e16ab75 ("mac80211: minstrel_ht: fill all requested rates")
Link: https://lore.kernel.org/all/12e5adcd-8aed-f0f7-70cc-4fb7b656b829@camlingroup.com/
Link: https://lore.kernel.org/linux-wireless/20220915131445.30600-1-lech.perczak@camlingroup.com/
Cc: Jérôme Pouiller <jerome.pouiller@silabs.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: Krzysztof Drobiński <krzysztof.drobinski@camlingroup.com>,
Signed-off-by: Paweł Lenkow <pawel.lenkow@camlingroup.com>
Signed-off-by: Lech Perczak <lech.perczak@camlingroup.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit 10cb8e6175 ("mac80211: enable QoS support for nl80211 ctrl port")
changed ieee80211_tx_control_port() to aways call
__ieee80211_select_queue() without checking local->hw.queues.
__ieee80211_select_queue() returns a queue-id between 0 and 3, which means
that now ieee80211_tx_control_port() may end up setting the queue-mapping
for a skb to a value higher then local->hw.queues if local->hw.queues
is less then 4.
Specifically this is a problem for ralink rt2500-pci cards where
local->hw.queues is 2. There this causes rt2x00queue_get_tx_queue() to
return NULL and the following error to be logged: "ieee80211 phy0:
rt2x00mac_tx: Error - Attempt to send packet over invalid queue 2",
after which association with the AP fails.
Other callers of __ieee80211_select_queue() skip calling it when
local->hw.queues < IEEE80211_NUM_ACS, add the same check to
ieee80211_tx_control_port(). This fixes ralink rt2500-pci and
similar cards when less then 4 tx-queues no longer working.
Fixes: 10cb8e6175 ("mac80211: enable QoS support for nl80211 ctrl port")
Cc: Markus Theil <markus.theil@tu-ilmenau.de>
Suggested-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220918192052.443529-1-hdegoede@redhat.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Make sure local->queue_stop_reasons and vif.txqs_stopped stay in sync.
When a new vif is created the queues may end up in an inconsistent state
and be inoperable:
Communication not using iTXQ will work, allowing to e.g. complete the
association. But the 4-way handshake will time out. The sta will not
send out any skbs queued in iTXQs.
All normal attempts to start the queues will fail when reaching this
state.
local->queue_stop_reasons will have marked all queues as operational but
vif.txqs_stopped will still be set, creating an inconsistent internal
state.
In reality this seems to be race between the mac80211 function
ieee80211_do_open() setting SDATA_STATE_RUNNING and the wake_txqs_tasklet:
Depending on the driver and the timing the queues may end up to be
operational or not.
Cc: stable@vger.kernel.org
Fixes: f856373e2f ("wifi: mac80211: do not wake queues on a vif that is being stopped")
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Acked-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220915130946.302803-1-alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_txq_purge() calls fq_tin_reset() and
ieee80211_purge_tx_queue(); Both are then calling
ieee80211_free_txskb(). Which can decide to TX the skb again.
There are at least two ways to get a deadlock:
1) When we have a TDLS teardown packet queued in either tin or frags
ieee80211_tdls_td_tx_handle() will call ieee80211_subif_start_xmit()
while we still hold fq->lock. ieee80211_txq_enqueue() will thus
deadlock.
2) A variant of the above happens if aggregation is up and running:
In that case ieee80211_iface_work() will deadlock with the original
task: The original tasks already holds fq->lock and tries to get
sta->lock after kicking off ieee80211_iface_work(). But the worker
can get sta->lock prior to the original task and will then spin for
fq->lock.
Avoid these deadlocks by not sending out any skbs when called via
ieee80211_free_txskb().
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Link: https://lore.kernel.org/r/20220915124120.301918-1-alexander@wetzel-home.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Quite often, the HW get stuck in error condition if a stream error
was detected. As documented, the HW should stop immediately and self
reset. There is likely a problem or a miss-understanding of the self
reset mechanism, as unless we make a long pause, the next command
will then report an error even if there is no error in it.
Disabling error detection fixes the issue, and let the decoder continue
after an error. This patch is safe for backport into older kernels.
Fixes: cd33c83044 ("media: rkvdec: Add the rkvdec driver")
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Tested-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Commit a1a2b7125e ("of/platform: Drop static setup of IRQ resource
from DT core") removed support for calling platform_get_resource(...,
IORESOURCE_IRQ, ...) on DT-based drivers, but the probe() function of
mtk-vcodec's encoder was still making use of it. This caused the encoder
driver to fail probe.
Since the platform_get_resource() call was only being used to check for
the presence of the interrupt (its returned resource wasn't even used)
and platform_get_irq() was already being used to get the IRQ, simply
drop the use of platform_get_resource(IORESOURCE_IRQ) and handle the
failure of platform_get_irq(), to get the driver probing again.
[hverkuil: drop unused struct resource *res]
Fixes: a1a2b7125e ("of/platform: Drop static setup of IRQ resource from DT core")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
vb2_core_qbuf and vb2_core_querybuf don't check the range of b->index
controlled by the user.
Fix this by adding range checking code before using them.
Fixes: 57868acc36 ("media: videobuf2: Add new uAPI for DVB streaming I/O")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If allocating array_buf fails, or copying data from userspace into that
buffer fails, then just free memory and return the error. Don't attempt
to call video_put_user() since there is no point, and it would copy back
data on error even if INFO_FL_ALWAYS_COPY wasn't set.
So if writing the array back to userspace fails, then don't go to
out_array_args, instead just continue with the regular code that just
returns the error unless 'always_copy' is set.
Update the VIDIOC_G/S/TRY_EXT_CTRLS ioctls to set the ALWAYS_COPY flag
since they now need it. Before this worked due to this buggy code, but
now that that is fixed these ioctls need to set this flag explicitly.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
E3C/E4C SSDs do support the Write Zeroes command in theory, but have very
bad performance when using it. As the firmware has been frozen for these
products we can not expect firmware improvements for it, so disable
Write Zeroes.
Signed-off-by: Tina Hsu <tina_hsu@phison.corp-partner.google.com>
[hch: update the commit message]
Signed-off-by: Christoph Hellwig <hch@lst.de>
The IOC_PR_CLEAR and IOC_PR_RELEASE ioctls are
non-functional on NVMe devices because the nvme_pr_clear()
and nvme_pr_release() functions set the IEKEY field incorrectly.
The IEKEY field should be set only when the key is zero (i.e,
not specified). The current code does it backwards.
Furthermore, the NVMe spec describes the persistent
reservation "clear" function as an option on the reservation
release command. The current implementation of nvme_pr_clear()
erroneously uses the reservation register command.
Fix these errors. Note that NVMe version 1.3 and later specify
that setting the IEKEY field will return an error of Invalid
Field in Command. The fix will set IEKEY when the key is zero,
which is appropriate as these ioctls consider a zero key to
be "unspecified", and the intention of the spec change is
to require a valid key.
Tested on a version 1.4 PCI NVMe device in an Azure VM.
Fixes: 1673f1f08c ("nvme: move block_device_operations and ns/ctrl freeing to common code")
Fixes: 1d277a637a ("NVMe: Add persistent reservation ops")
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Commit 1527f69204 ("ata: ahci: Add Green Sardine vendor ID as
board_ahci_mobile") added an explicit entry for AMD Green Sardine
AHCI controller using the board_ahci_mobile configuration (this
configuration has later been renamed to board_ahci_low_power).
The board_ahci_low_power configuration enables support for low power
modes.
This explicit entry takes precedence over the generic AHCI controller
entry, which does not enable support for low power modes.
Therefore, when commit 1527f69204 ("ata: ahci: Add Green Sardine
vendor ID as board_ahci_mobile") was backported to stable kernels,
it make some Pioneer optical drives, which was working perfectly fine
before the commit was backported, stop working.
The real problem is that the Pioneer optical drives do not handle low
power modes correctly. If these optical drives would have been tested
on another AHCI controller using the board_ahci_low_power configuration,
this issue would have been detected earlier.
Unfortunately, the board_ahci_low_power configuration is only used in
less than 15% of the total AHCI controller entries, so many devices
have never been tested with an AHCI controller with low power modes.
Fixes: 1527f69204 ("ata: ahci: Add Green Sardine vendor ID as board_ahci_mobile")
Cc: stable@vger.kernel.org
Reported-by: Jaap Berkhout <j.j.berkhout@staalenberk.nl>
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Pull x86 fixes from Dave Hansen:
- A performance fix for recent large AMD systems that avoids an ancient
cpu idle hardware workaround
- A new Intel model number. Folks like these upstream as soon as
possible so that each developer doing feature development doesn't
need to carry their own #define
- SGX fixes for a userspace crash and a rare kernel warning
* tag 'x86_urgent_for_v6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ACPI: processor idle: Practically limit "Dummy wait" workaround to old Intel systems
x86/sgx: Handle VA page allocation failure for EAUG on PF.
x86/sgx: Do not fail on incomplete sanitization on premature stop of ksgxd
x86/cpu: Add CPU model numbers for Meteor Lake
A recent change affecting the behaviour of phys_to_dma() to
actually require the device tree ranges to work unmasked a
bug in the Integrator DMA ranges.
The PL110 uses the CMA allocator to obtain coherent allocations
from a dedicated 1MB video memory, leading to the following
call chain:
drm_gem_cma_create()
dma_alloc_attrs()
dma_alloc_from_dev_coherent()
__dma_alloc_from_coherent()
dma_get_device_base()
phys_to_dma()
translate_phys_to_dma()
phys_to_dma() by way of translate_phys_to_dma() will nowadays not
provide 1:1 mappings unless the ranges are properly defined in
the device tree and reflected into the dev->dma_range_map.
There is a bug in the device trees because the DMA ranges are
incorrectly specified, and the patch uncovers this bug.
Solution:
- Fix the LB (logic bus) ranges to be 1-to-1 like they should
have always been.
- Provide a 1:1 dma-ranges attribute to the PL110.
- Mark the PL110 display controller as DMA coherent.
This makes the DMA ranges work right and makes the PL110
framebuffer work again.
Fixes: af6f23b88e ("ARM/dma-mapping: use the generic versions of dma_to_phys/phys_to_dma by default")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220926073311.1610568-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull last (?) hotfixes from Andrew Morton:
"26 hotfixes.
8 are for issues which were introduced during this -rc cycle, 18 are
for earlier issues, and are cc:stable"
* tag 'mm-hotfixes-stable-2022-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (26 commits)
x86/uaccess: avoid check_object_size() in copy_from_user_nmi()
mm/page_isolation: fix isolate_single_pageblock() isolation behavior
mm,hwpoison: check mm when killing accessing process
mm/hugetlb: correct demote page offset logic
mm: prevent page_frag_alloc() from corrupting the memory
mm: bring back update_mmu_cache() to finish_fault()
frontswap: don't call ->init if no ops are registered
mm/huge_memory: use pfn_to_online_page() in split_huge_pages_all()
mm: fix madivse_pageout mishandling on non-LRU page
powerpc/64s/radix: don't need to broadcast IPI for radix pmd collapse flush
mm: gup: fix the fast GUP race against THP collapse
mm: fix dereferencing possible ERR_PTR
vmscan: check folio_test_private(), not folio_get_private()
mm: fix VM_BUG_ON in __delete_from_swap_cache()
tools: fix compilation after gfp_types.h split
mm/damon/dbgfs: fix memory leak when using debugfs_lookup()
mm/migrate_device.c: copy pte dirty bit to page
mm/migrate_device.c: add missing flush_cache_page()
mm/migrate_device.c: flush TLB while holding PTL
x86/mm: disable instrumentations of mm/pgprot.c
...
The label passed to the QDESC_GET for the ETHOFLD TXQ, RXQ, and FLQ, is the
'out' one, which skips the 'out_unlock' label, and thus doesn't unlock the
'uld_mutex' before returning. Additionally, since commit 5148e5950c
("cxgb4: add EOTID tracking and software context dump"), the access to
these ETHOFLD hardware queues should be protected by the 'mqprio_mutex'
instead.
Fixes: 2d0cb84dd9 ("cxgb4: add ETHOFLD hardware queue support")
Fixes: 5148e5950c ("cxgb4: add EOTID tracking and software context dump")
Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com>
Reviewed-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Link: https://lore.kernel.org/r/20220922175109.764898-1-rafaelmendsr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull missed ext4 fix from Ted Ts'o:
"Fix an potential unitialzied variable bug; this was a fixup that I had
forgotten to apply before the last pull request for ext4. My bad"
* tag 'ext4_for_linus_fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fixup possible uninitialized variable access in ext4_mb_choose_next_group_cr1()
The check_object_size() helper under CONFIG_HARDENED_USERCOPY is designed
to skip any checks where the length is known at compile time as a
reasonable heuristic to avoid "likely known-good" cases. However, it can
only do this when the copy_*_user() helpers are, themselves, inline too.
Using find_vmap_area() requires taking a spinlock. The
check_object_size() helper can call find_vmap_area() when the destination
is in vmap memory. If show_regs() is called in interrupt context, it will
attempt a call to copy_from_user_nmi(), which may call check_object_size()
and then find_vmap_area(). If something in normal context happens to be
in the middle of calling find_vmap_area() (with the spinlock held), the
interrupt handler will hang forever.
The copy_from_user_nmi() call is actually being called with a fixed-size
length, so check_object_size() should never have been called in the first
place. Given the narrow constraints, just replace the
__copy_from_user_inatomic() call with an open-coded version that calls
only into the sanitizers and not check_object_size(), followed by a call
to raw_copy_from_user().
[akpm@linux-foundation.org: no instrument_copy_from_user() in my tree...]
Link: https://lkml.kernel.org/r/20220919201648.2250764-1-keescook@chromium.org
Link: https://lore.kernel.org/all/CAOUHufaPshtKrTWOz7T7QFYUNVGFm0JBjvM700Nhf9qEL9b3EQ@mail.gmail.com
Fixes: 0aef499f31 ("mm/usercopy: Detect vmalloc overruns")
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Yu Zhao <yuzhao@google.com>
Reported-by: Florian Lehner <dev@der-flo.net>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Florian Lehner <dev@der-flo.net>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
set_migratetype_isolate() does not allow isolating MIGRATE_CMA pageblocks
unless it is used for CMA allocation. isolate_single_pageblock() did not
have the same behavior when it is used together with
set_migratetype_isolate() in start_isolate_page_range(). This allows
alloc_contig_range() with migratetype other than MIGRATE_CMA, like
MIGRATE_MOVABLE (used by alloc_contig_pages()), to isolate first and last
pageblock but fail the rest. The failure leads to changing migratetype of
the first and last pageblock to MIGRATE_MOVABLE from MIGRATE_CMA,
corrupting the CMA region. This can happen during gigantic page
allocations.
Like Doug said here:
https://lore.kernel.org/linux-mm/a3363a52-883b-dcd1-b77f-f2bb378d6f2d@gmail.com/T/#u,
for gigantic page allocations, the user would notice no difference,
since the allocation on CMA region will fail as well as it did before.
But it might hurt the performance of device drivers that use CMA, since
CMA region size decreases.
Fix it by passing migratetype into isolate_single_pageblock(), so that
set_migratetype_isolate() used by isolate_single_pageblock() will prevent
the isolation happening.
Link: https://lkml.kernel.org/r/20220914023913.1855924-1-zi.yan@sent.com
Fixes: b2c9e2fbba ("mm: make alloc_contig_range work at pageblock granularity")
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reported-by: Doug Berger <opendmb@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The GHES code calls memory_failure_queue() from IRQ context to queue work
into workqueue and schedule it on the current CPU. Then the work is
processed in memory_failure_work_func() by kworker and calls
memory_failure().
When a page is already poisoned, commit a3f5d80ea4 ("mm,hwpoison: send
SIGBUS with error virutal address") make memory_failure() call
kill_accessing_process() that:
- holds mmap locking of current->mm
- does pagetable walk to find the error virtual address
- and sends SIGBUS to the current process with error info.
However, the mm of kworker is not valid, resulting in a null-pointer
dereference. So check mm when killing the accessing process.
[akpm@linux-foundation.org: remove unrelated whitespace alteration]
Link: https://lkml.kernel.org/r/20220914064935.7851-1-xueshuai@linux.alibaba.com
Fixes: a3f5d80ea4 ("mm,hwpoison: send SIGBUS with error virutal address")
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Bixuan Cui <cuibixuan@linux.alibaba.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A number of drivers call page_frag_alloc() with a fragment's size >
PAGE_SIZE.
In low memory conditions, __page_frag_cache_refill() may fail the order
3 cache allocation and fall back to order 0; In this case, the cache
will be smaller than the fragment, causing memory corruptions.
Prevent this from happening by checking if the newly allocated cache is
large enough for the fragment; if not, the allocation will fail and
page_frag_alloc() will return NULL.
Link: https://lkml.kernel.org/r/20220715125013.247085-1-mlombard@redhat.com
Fixes: b63ae8ca09 ("mm/net: Rename and move page fragment handling from net/ to mm/")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Cc: Chen Lin <chen45464546@163.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Running this test program on ARMv4 a few times (sometimes just once)
reproduces the bug.
int main()
{
unsigned i;
char paragon[SIZE];
void* ptr;
memset(paragon, 0xAA, SIZE);
ptr = mmap(NULL, SIZE, PROT_READ | PROT_WRITE,
MAP_ANON | MAP_SHARED, -1, 0);
if (ptr == MAP_FAILED) return 1;
printf("ptr = %p\n", ptr);
for (i=0;i<10000;i++){
memset(ptr, 0xAA, SIZE);
if (memcmp(ptr, paragon, SIZE)) {
printf("Unexpected bytes on iteration %u!!!\n", i);
break;
}
}
munmap(ptr, SIZE);
}
In the "ptr" buffer there appear runs of zero bytes which are aligned
by 16 and their lengths are multiple of 16.
Linux v5.11 does not have the bug, "git bisect" finds the first bad commit:
f9ce0be71d ("mm: Cleanup faultaround and finish_fault() codepaths")
Before the commit update_mmu_cache() was called during a call to
filemap_map_pages() as well as finish_fault(). After the commit
finish_fault() lacks it.
Bring back update_mmu_cache() to finish_fault() to fix the bug.
Also call update_mmu_tlb() only when returning VM_FAULT_NOPAGE to more
closely reproduce the code of alloc_set_pte() function that existed before
the commit.
On many platforms update_mmu_cache() is nop:
x86, see arch/x86/include/asm/pgtable
ARMv6+, see arch/arm/include/asm/tlbflush.h
So, it seems, few users ran into this bug.
Link: https://lkml.kernel.org/r/20220908204809.2012451-1-saproj@gmail.com
Fixes: f9ce0be71d ("mm: Cleanup faultaround and finish_fault() codepaths")
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
NULL pointer dereference is triggered when calling thp split via debugfs
on the system with offlined memory blocks. With debug option enabled, the
following kernel messages are printed out:
page:00000000467f4890 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x121c000
flags: 0x17fffc00000000(node=0|zone=2|lastcpupid=0x1ffff)
raw: 0017fffc00000000 0000000000000000 dead000000000122 0000000000000000
raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000
page dumped because: unmovable page
page:000000007d7ab72e is uninitialized and poisoned
page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
------------[ cut here ]------------
kernel BUG at include/linux/mm.h:1248!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 16 PID: 20964 Comm: bash Tainted: G I 6.0.0-rc3-foll-numa+ #41
...
RIP: 0010:split_huge_pages_write+0xcf4/0xe30
This shows that page_to_nid() in page_zone() is unexpectedly called for an
offlined memmap.
Use pfn_to_online_page() to get struct page in PFN walker.
Link: https://lkml.kernel.org/r/20220908041150.3430269-1-naoya.horiguchi@linux.dev
Fixes: f1dd2cd13c ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b]
Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Co-developed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org> [5.10+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Since general RCU GUP fast was introduced in commit 2667f50e8b ("mm:
introduce a general RCU get_user_pages_fast()"), a TLB flush is no longer
sufficient to handle concurrent GUP-fast in all cases, it only handles
traditional IPI-based GUP-fast correctly. On architectures that send an
IPI broadcast on TLB flush, it works as expected. But on the
architectures that do not use IPI to broadcast TLB flush, it may have the
below race:
CPU A CPU B
THP collapse fast GUP
gup_pmd_range() <-- see valid pmd
gup_pte_range() <-- work on pte
pmdp_collapse_flush() <-- clear pmd and flush
__collapse_huge_page_isolate()
check page pinned <-- before GUP bump refcount
pin the page
check PTE <-- no change
__collapse_huge_page_copy()
copy data to huge page
ptep_clear()
install huge pmd for the huge page
return the stale page
discard the stale page
The race can be fixed by checking whether PMD is changed or not after
taking the page pin in fast GUP, just like what it does for PTE. If the
PMD is changed it means there may be parallel THP collapse, so GUP should
back off.
Also update the stale comment about serializing against fast GUP in
khugepaged.
Link: https://lkml.kernel.org/r/20220907180144.555485-1-shy828301@gmail.com
Fixes: 2667f50e8b ("mm: introduce a general RCU get_user_pages_fast()")
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Instead of picking the task from the first submitter task, rather use the
creator task or in the case of disabled (IORING_SETUP_R_DISABLED) the
enabling task.
This approach allows a lot of simplification of the logic here. This
removes init logic from the submission path, which can always be a bit
confusing, but also removes the need for locking to write (or read) the
submitter_task.
Users that want to move a ring before submitting can create the ring
disabled and then enable it on the submitting task.
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Fixes: 97bbdc06a4 ("io_uring: add IORING_SETUP_SINGLE_ISSUER")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit fe2c9c61f6.
On Tue, Sep 13, 2022 at 05:48:58PM +0100, Russell King (Oracle) wrote:
>What happens if this is built as a module, and the module is loaded,
>binds (and creates the directory), then is removed, and then re-
>inserted? Nothing removes the old directory, so doesn't
>debugfs_create_dir() fail, resulting in subsequent failure to add
>any subsequent debugfs entries?
>
>I don't think this patch should be backported to stable trees until
>this point is addressed.
Revert until a proper fix is available as the original behavior was
better.
Cc: Marcin Wojtas <mw@semihalf.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: stable@kernel.org
Reported-by: Russell King <linux@armlinux.org.uk>
Fixes: fe2c9c61f6 ("net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220923234736.657413-1-sashal@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we submit a new pair of contexts to ELSP for execution, we start a
timer by which point we expect the HW to have switched execution to the
pending contexts. If the promotion to the new pair of contexts has not
occurred, we declare the executing context to have hung and force the
preemption to take place by resetting the engine and resubmitting the
new contexts.
This can lead to an unfair situation where almost all of the preemption
timeout is consumed by the first context which just switches into the
second context immediately prior to the timer firing and triggering the
preemption reset (assuming that the timer interrupts before we process
the CS events for the context switch). The second context hasn't yet had
a chance to yield to the incoming ELSP (and send the ACk for the
promotion) and so ends up being blamed for the reset.
If we see that a context switch has occurred since setting the
preemption timeout, but have not yet received the ACK for the ELSP
promotion, rearm the preemption timer and check again. This is
especially significant if the first context was not schedulable and so
we used the shortest timer possible, greatly increasing the chance of
accidentally blaming the second innocent context.
Fixes: 3a7a92aba8 ("drm/i915/execlists: Force preemption")
Fixes: d12acee84f ("drm/i915/execlists: Cancel banned contexts on schedule-out")
Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Tested-by: Andrzej Hajda <andrzej.hajda@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220921135258.1714873-1-andrzej.hajda@intel.com
(cherry picked from commit 107ba1a2c7)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Commit b55878c90a ("perf test: Add test for branch stack
sampling") added test for branch stack sampling. There is a sanity check
in the beginning to skip the test if the hardware doesn't support branch
stack sampling.
Snippet
<<>>
skip the test if the hardware doesn't support branch stack sampling
perf record -b -o- -B true > /dev/null 2>&1 || exit 2
<<>>
But the testcase also uses branch sample types: save_type, any. if any
platform doesn't support the branch filters used in the test, the testcase
will fail. In powerpc, currently mutliple branch filters are not supported
and hence this test fails in powerpc. Fix the sanity check to look at
the support for branch filters used in this test before proceeding with
the test.
Fixes: b55878c90a ("perf test: Add test for branch stack sampling")
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Link: https://lore.kernel.org/r/20220921145255.20972-2-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By default, we create two hybrid cache events, one is for cpu_core, and
another is for cpu_atom. But Some hybrid hardware cache events are only
available on one CPU PMU. For example, the 'L1-dcache-load-misses' is only
available on cpu_core, while the 'L1-icache-loads' is only available on
cpu_atom. We need to remove "not supported" hybrid cache events. By
extending is_event_supported() to global API and using it to check if the
hybrid cache events are supported before being created, we can remove the
"not supported" hybrid cache events.
Before:
# ./perf stat -e L1-dcache-load-misses,L1-icache-loads -a sleep 1
Performance counter stats for 'system wide':
52,570 cpu_core/L1-dcache-load-misses/
<not supported> cpu_atom/L1-dcache-load-misses/
<not supported> cpu_core/L1-icache-loads/
1,471,817 cpu_atom/L1-icache-loads/
1.004915229 seconds time elapsed
After:
# ./perf stat -e L1-dcache-load-misses,L1-icache-loads -a sleep 1
Performance counter stats for 'system wide':
54,510 cpu_core/L1-dcache-load-misses/
1,441,286 cpu_atom/L1-icache-loads/
1.005114281 seconds time elapsed
Fixes: 30def61f64 ("perf parse-events: Create two hybrid cache events")
Reported-by: Yi Ammy <ammy.yi@intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220923030013.3726410-2-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Some hybrid hardware cache events are only available on one CPU PMU. For
example, 'L1-dcache-load-misses' is only available on cpu_core.
We have supported in the perf list clearly reporting this info, the
function works fine before but recently the argument "config" in API
is_event_supported() is changed from "u64" to "unsigned int" which
caused a regression, the "perf list" then can not display the PMU prefix
for some hybrid cache events.
For the hybrid systems, the PMU type ID is stored at config[63:32],
define config to "unsigned int" will miss the PMU type ID information,
then the regression happened, the config should be defined as "u64".
Before:
# ./perf list |grep "Hardware cache event"
L1-dcache-load-misses [Hardware cache event]
L1-dcache-loads [Hardware cache event]
L1-dcache-stores [Hardware cache event]
L1-icache-load-misses [Hardware cache event]
L1-icache-loads [Hardware cache event]
LLC-load-misses [Hardware cache event]
LLC-loads [Hardware cache event]
LLC-store-misses [Hardware cache event]
LLC-stores [Hardware cache event]
branch-load-misses [Hardware cache event]
branch-loads [Hardware cache event]
dTLB-load-misses [Hardware cache event]
dTLB-loads [Hardware cache event]
dTLB-store-misses [Hardware cache event]
dTLB-stores [Hardware cache event]
iTLB-load-misses [Hardware cache event]
node-load-misses [Hardware cache event]
node-loads [Hardware cache event]
After:
# ./perf list |grep "Hardware cache event"
L1-dcache-loads [Hardware cache event]
L1-dcache-stores [Hardware cache event]
L1-icache-load-misses [Hardware cache event]
LLC-load-misses [Hardware cache event]
LLC-loads [Hardware cache event]
LLC-store-misses [Hardware cache event]
LLC-stores [Hardware cache event]
branch-load-misses [Hardware cache event]
branch-loads [Hardware cache event]
cpu_atom/L1-icache-loads/ [Hardware cache event]
cpu_core/L1-dcache-load-misses/ [Hardware cache event]
cpu_core/node-load-misses/ [Hardware cache event]
cpu_core/node-loads/ [Hardware cache event]
dTLB-load-misses [Hardware cache event]
dTLB-loads [Hardware cache event]
dTLB-store-misses [Hardware cache event]
dTLB-stores [Hardware cache event]
iTLB-load-misses [Hardware cache event]
Fixes: 9b7c7728f4 ("perf parse-events: Break out tracepoint and printing")
Reported-by: Yi Ammy <ammy.yi@intel.com>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220923030013.3726410-1-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
pwm support incompatible with Armada 80x0/70x0 API is not only in
Armada 370, but also in Armada XP, 38x and 39x. So basically every non-A8K
platform. Fix check for pwm support appropriately.
Fixes: 85b7d8abfe ("gpio: mvebu: add pwm support for Armada 8K/7K")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Pull ext4 fixes from Ted Ts'o:
"Regression and bug fixes:
- Performance regression fix from 5.18 on a Rasberry Pi
- Fix extent parsing bug which triggers a BUG_ON when a (corrupted)
extent tree has has a non-root node when zero entries.
- Fix a livelock where in the right (wrong) circumstances a large
number of nfsd threads can try to write to a nearly full file
system, and retry for hours(!)"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: limit the number of retries after discarding preallocations blocks
ext4: fix bug in extents parsing when eh_entries == 0 and eh_depth > 0
ext4: use buckets for cr 1 block scan instead of rbtree
ext4: use locality group preallocation for small closed files
ext4: make directory inode spreading reflect flexbg size
ext4: avoid unnecessary spreading of allocations among groups
ext4: make mballoc try target group first even with mb_optimize_scan
Pull NVDIMM and DAX fixes from Dan Williams:
"A recently discovered one-line fix for devdax that further addresses a
v5.5 regression, and (a bit embarrassing) a small batch of fixes that
have been sitting in my fixes tree for weeks.
The older fixes have soaked in linux-next during that time and address
an fsdax infinite loop and some other minor fixups.
- Fix a infinite loop bug in fsdax
- Fix memory-type detection for devdax (EINJ regression)
- Small cleanups"
* tag 'dax-and-nvdimm-fixes-v6.0-final' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
devdax: Fix soft-reservation memory description
fsdax: Fix infinite loop in dax_iomap_rw()
nvdimm/namespace: drop nested variable in create_namespace_pmem()
ndtest: Cleanup all of blk namespace specific code
pmem: fix a name collision
Pull i2c fixes from Wolfram Sang:
"I2C driver bugfixes for mlxbf and imx, a few documentation fixes after
the rework this cycle, and one hardening for the i2c-mux core"
* tag 'i2c-for-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mux: harden i2c_mux_alloc() against integer overflows
i2c: mlxbf: Fix frequency calculation
i2c: mlxbf: prevent stack overflow in mlxbf_i2c_smbus_start_transaction()
i2c: mlxbf: incorrect base address passed during io write
Documentation: i2c: fix references to other documents
MAINTAINERS: remove Nehal Shah from AMD MP2 I2C DRIVER
i2c: imx: If pm_runtime_get_sync() returned 1 device access is possible
Since intertouch was enabled for the T14 and P14s AMD G1 laptops there
have been a number of reports of touchpads not working well.
Debugging this with Synaptics they noted that intertouch should not be
enabled as SMBUS host notify is not available on these laptops.
Reverting the previous commit (e4ce4d3a93)
to restore functionality back to what it was.
Note - we are working with Synaptics to see if there is a better
solution, but nothing is confirmed as yet.
Signed-off-by: Mark Pearson <markpearson@lenovo.com>
Link: https://lore.kernel.org/r/20220920193936.8709-1-markpearson@lenovo.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Each call to device/fwnode_get_named_child_node() must be matched
with a call to fwnode_handle_put() once the corresponding node is
no longer in use. This ensures a reference count remains balanced
in the case of dynamic device tree support.
Currently, the driver never calls fwnode_handle_put(). This patch
adds the missing calls.
Fixes: ce1cb0eec8 ("input: keyboard: Add support for Azoteq IQS620A/621/622/624/625")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/YyYbYvlkq5cy55dc@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The "hmem" platform-devices that are created to represent the
platform-advertised "Soft Reserved" memory ranges end up inserting a
resource that causes the iomem_resource tree to look like this:
340000000-43fffffff : hmem.0
340000000-43fffffff : Soft Reserved
340000000-43fffffff : dax0.0
This is because insert_resource() reparents ranges when they completely
intersect an existing range.
This matters because code that uses region_intersects() to scan for a
given IORES_DESC will only check that top-level 'hmem.0' resource and
not the 'Soft Reserved' descendant.
So, to support EINJ (via einj_error_inject()) to inject errors into
memory hosted by a dax-device, be sure to describe the memory as
IORES_DESC_SOFT_RESERVED. This is a follow-on to:
commit b13a3e5fd4 ("ACPI: APEI: Fix _EINJ vs EFI_MEMORY_SP")
...that fixed EINJ support for "Soft Reserved" ranges in the first
instance.
Fixes: 262b45ae3a ("x86/efi: EFI soft reservation to E820 enumeration")
Reported-by: Ricardo Sandoval Torres <ricardo.sandoval.torres@intel.com>
Tested-by: Ricardo Sandoval Torres <ricardo.sandoval.torres@intel.com>
Cc: <stable@vger.kernel.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Omar Avelar <omar.avelar@intel.com>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Mark Gross <markgross@kernel.org>
Link: https://lore.kernel.org/r/166397075670.389916.7435722208896316387.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull Kbuild fixes from Masahiro Yamada:
- Fix build error for the combination of SYSTEM_TRUSTED_KEYRING=y and
X509_CERTIFICATE_PARSER=m
- Fix DEBUG_INFO_SPLIT to generate debug info for GCC 11+ and Clang 12+
- Revive debug info for assembly files
- Remove unused code
* tag 'kbuild-fixes-v6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Makefile.debug: re-enable debug info for .S files
Makefile.debug: set -g unconditional on CONFIG_DEBUG_INFO_SPLIT
certs: make system keyring depend on built-in x509 parser
Kconfig: remove unused function 'menu_get_root_menu'
scripts/clang-tools: remove unused module
Pull s390 fix from Vasily Gorbik:
- Fix potential hangs in VFIO AP driver
* tag 's390-6.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vfio-ap: bypass unnecessary processing of AP resources
Pull power management fixes from Rafael Wysocki:
"These fix an uninitialized variable usage in the operating performance
points code and add missing DT bindings for it.
Specifics:
- Fix uninitialized variable usage in dev_pm_opp_config_clks_simple()
(Christophe JAILLET)
- Add missing OPP DT properties (Rob Herring)"
* tag 'pm-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
dt-bindings: opp: Add missing (unevaluated|additional)Properties on child nodes
OPP: Fix an un-initialized variable usage
Pull char/misc driver fixes from Greg KH:
"Here are three tiny driver fixes for 6.0-rc7. They include:
- phy driver reset bugfix
- fpga memleak bugfix
- counter irq config bugfix
The first two have been in linux-next for a while, the last one has
only been added to my tree in the past few days, but was in linux-next
under a different commit id. I couldn't pull directly from the counter
tree due to some gpg key propagation issue, so I took the commit
directly from email instead"
* tag 'char-misc-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
counter: 104-quad-8: Fix skipped IRQ lines during events configuration
fpga: m10bmc-sec: Fix possible memory leak of flash_buf
phy: marvell: phy-mvebu-a3700-comphy: Remove broken reset support
Pull tty/serial driver fixes from Greg KH:
"Here are some small, and late, serial driver fixes for 6.0-rc7 to
resolve some reported problems.
Included in here are:
- tegra icount accounting fixes, including a framework function that
other drivers will be converted over to using in 6.1-rc1.
- fsl_lpuart reset bugfix
- 8250 omap 485 bugfix
- sifive serial clock bugfix
The last three patches have not shown up in linux-next due to them
being added to my tree only 2 days ago, but they are tiny and
self-contained and the developers say they resolve issues that they
have with 6.0-rc. The other three have been in linux-next for a while
with no reported issues"
* tag 'tty-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: sifive: enable clocks for UART when probed
serial: 8250: omap: Use serial8250_em485_supported
serial: fsl_lpuart: Reset prior to registration
serial: tegra-tcu: Use uart_xmit_advance(), fixes icount.tx accounting
serial: tegra: Use uart_xmit_advance(), fixes icount.tx accounting
serial: Create uart_xmit_advance()
Pull cgroup fixes from Tejun Heo:
- Add Waiman Long as a cpuset maintainer
- cgroup_get_from_id() could be fed a kernfs ID which doesn't point to
a cgroup directory but a knob file and then crash. Error out if the
lookup kernfs_node isn't a directory.
* tag 'cgroup-for-6.0-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: cgroup_get_from_id() must check the looked-up kn is a directory
cpuset: Add Waiman Long as a cpuset maintainer
Pull workqueue fix from Tejun Heo:
"Just one patch to improve flush lockdep coverage"
* tag 'wq-for-6.0-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: don't skip lockdep work dependency in cancel_work_sync()
Pull io_uring fix from Jens Axboe:
"Just a single fix for an issue with un-reaped IOPOLL requests on ring
exit"
* tag 'io_uring-6.0-2022-09-23' of git://git.kernel.dk/linux:
io_uring: ensure that cached task references are always put on exit
Pull block fixes from Jens Axboe:
"Fix a regression that's been plaguing us by reverting the offending
commit, as attempts to both reproduce the issue and fix it in a saner
fashion have failed.
Fix for a potential oops condition in the s390 dasd block driver"
* tag 'block-6.0-2022-09-22' of git://git.kernel.dk/linux:
Revert "block: freeze the queue earlier in del_gendisk"
s390/dasd: fix Oops in dasd_alias_get_start_dev due to missing pavgroup
io_uring caches task references to avoid doing atomics for each of them
per request. If a request is put from the same task that allocated it,
then we can maintain a per-ctx cache of them. This obviously relies
on io_uring always pruning caches in a reliable way, and there's
currently a case off io_uring fd release where we can miss that.
One example is a ring setup with IOPOLL, which relies on the task
polling for completions, which will free them. However, if such a task
submits a request and then exits or closes the ring without reaping
the completion, then ring release will reap and put. If release happens
from that very same task, the completed request task refs will get
put back into the cache pool. This is problematic, as we're now beyond
the point of pruning caches.
Manually drop these caches after doing an IOPOLL reap. This releases
references from the current task, which is enough. If another task
happens to be doing the release, then the caching will not be
triggered and there's no issue.
Cc: stable@vger.kernel.org
Fixes: e98e49b2bb ("io_uring: extend task put optimisations")
Reported-by: Homin Rhee <hominlab@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull arm64 fixes from Will Deacon:
"These are all very simple and self-contained, although the CFI
jump-table fix touches the generic linker script as that's where the
problematic macro lives.
- Fix false positive "sleeping while atomic" warning resulting from
the kPTI rework taking a mutex too early.
- Fix possible overflow in AMU frequency calculation
- Fix incorrect shift in CMN PMU driver which causes problems with
newer versions of the IP
- Reduce alignment of the CFI jump table to avoid huge kernel images
and link errors with !4KiB page size configurations"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
vmlinux.lds.h: CFI: Reduce alignment of jump-table to function alignment
perf/arm-cmn: Add more bits to child node address offset field
arm64: topology: fix possible overflow in amu_fie_setup()
arm64: mm: don't acquire mutex when rewriting swapper
Old, circa 2002 chipsets have a bug: they don't go idle when they are
supposed to. So, a workaround was added to slow the CPU down and
ensure that the CPU waits a bit for the chipset to actually go idle.
This workaround is ancient and has been in place in some form since
the original kernel ACPI implementation.
But, this workaround is very painful on modern systems. The "inl()"
can take thousands of cycles (see Link: for some more detailed
numbers and some fun kernel archaeology).
First and foremost, modern systems should not be using this code.
Typical Intel systems have not used it in over a decade because it is
horribly inferior to MWAIT-based idle.
Despite this, people do seem to be tripping over this workaround on
AMD system today.
Limit the "dummy wait" workaround to Intel systems. Keep Modern AMD
systems from tripping over the workaround. Remotely modern Intel
systems use intel_idle instead of this code and will, in practice,
remain unaffected by the dummy wait.
Reported-by: K Prateek Nayak <kprateek.nayak@amd.com>
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/all/20220921063638.2489-1-kprateek.nayak@amd.com/
Link: https://lkml.kernel.org/r/20220922184745.3252932-1-dave.hansen@intel.com
Commit e90886291c ("certs: make system keyring depend on x509 parser")
is not the right fix because x509_load_certificate_list() can be modular.
The combination of CONFIG_SYSTEM_TRUSTED_KEYRING=y and
CONFIG_X509_CERTIFICATE_PARSER=m still results in the following error:
LD .tmp_vmlinux.kallsyms1
ld: certs/system_keyring.o: in function `load_system_certificate_list':
system_keyring.c:(.init.text+0x8c): undefined reference to `x509_load_certificate_list'
make: *** [Makefile:1169: vmlinux] Error 1
Fixes: e90886291c ("certs: make system keyring depend on x509 parser")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Adam Borowski <kilobyte@angband.pl>
There is nowhere calling `menu_get_root_menu` function,
so remove it.
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull driver core fixes from Greg KH:
"Here are two tiny driver core fixes for 6.0-rc7 that resolve some
oft-reported problems.
The first is a revert of the "fw_devlink.strict=1" default option that
we keep trying to enable, but we keep finding platforms that this just
breaks everything on. So again, we need it reverted and hopefully it
can be worked on in future releases.
The second is a sysfs file-size bugfix that resolves an issue that
many people are starting to hit as the fix it is fixing also was
backported to stable kernels. The util-linux developers are starting
to get bugreports about sysfs files that contain no data because of
this problem, and this fix which has been in linux-next in the
bitfield tree for a long time, resolves it. I'm submitting it here as
it needs to be merged for 6.0-final, not for 6.1-rc1.
Both of these have been in linux-next with no reported issues, only
reports were that these fixed problems"
* tag 'driver-core-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers/base: Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES
Revert "driver core: Set fw_devlink.strict=1 by default"
Pull USB / Thunderbolt driver fixes and ids from Greg KH:
"Here are a few small USB and Thunderbolt driver fixes and new device
ids for 6.0-rc7.
They contain:
- new usb-serial driver ids
- documentation build warning fix in USB hub code
- flexcop-usb long-posted bugfix (the v4l maintainer for this is MIA
so I have finally picked this up as it is a fix for a reported
problem.)
- dwc3 64bit DMA bugfix
- new thunderbolt device ids
- typec build error fix
All of these have been in linux-next with no reported issues"
* tag 'usb-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: anx7411: Fix build error without CONFIG_POWER_SUPPLY
media: flexcop-usb: fix endpoint type check
USB: serial: option: add Quectel RM520N
USB: serial: option: add Quectel BG95 0x0203 composition
thunderbolt: Add support for Intel Maple Ridge single port controller
usb: dwc3: core: leave default DMA if the controller does not support 64-bit DMA
USB: core: Fix RST error in hub.c
Pull RISC-V fixes from Palmer Dabbelt:
- A handful of build fixes for the T-Head errata, including some
functional issues the compilers found
- A fix for a nasty sigreturn bug
* tag 'riscv-for-linus-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Avoid coupling the T-Head CMOs and Zicbom
riscv: fix a nasty sigreturn bug...
riscv: make t-head erratas depend on MMU
riscv: fix RISCV_ISA_SVPBMT kconfig dependency warning
RISC-V: Clean up the Zicbom block size probing
Reset controller fixes for v6.0
Fix the i.MX8MP PCIe PHY PERST bit polarity, issue the Sparx5 "switch"
reset (which turned out to be a rather more global reset) early on
startup, stubbing out the reset controller driver, and fix the NPCM8XX
USB reset sequence by setting IPSRST4 bits in the correct register.
* tag 'reset-fixes-for-v6.0' of git://git.pengutronix.de/pza/linux:
reset: npcm: fix iprst2 and iprst4 setting
reset: microchip-sparx5: issue a reset on startup
reset: imx7: Fix the iMX8MP PCIe PHY PERST support
Link: https://lore.kernel.org/r/20220923143519.41735-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull kvm fixes from Paolo Bonzini:
"As everyone back came back from conferences, here are the pending
patches for Linux 6.0.
ARM:
- Fix for kmemleak with pKVM
s390:
- Fixes for VFIO with zPCI
- smatch fix
x86:
- Ensure XSAVE-capable hosts always allow FP and SSE state to be
saved and restored via KVM_{GET,SET}_XSAVE
- Fix broken max_mmu_rmap_size stat
- Fix compile error with old glibc that doesn't have gettid()"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Inject #UD on emulated XSETBV if XSAVES isn't enabled
KVM: x86: Always enable legacy FP/SSE in allowed user XFEATURES
KVM: x86: Reinstate kvm_vcpu_arch.guest_supported_xcr0
KVM: x86/mmu: add missing update to max_mmu_rmap_size
selftests: kvm: Fix a compile error in selftests/kvm/rseq_test.c
KVM: s390: pci: register pci hooks without interpretation
KVM: s390: pci: fix GAIT physical vs virtual pointers usage
KVM: s390: Pass initialized arg even if unused
KVM: s390: pci: fix plain integer as NULL pointer warnings
KVM: arm64: Use kmemleak_free_part_phys() to unregister hyp_mem_base
Pull xen fix from Juergen Gross:
"A single fix for an issue in the xenbus driver (initialization of
multi-page rings for Xen PV devices)"
* tag 'for-linus-6.0-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/xenbus: fix xenbus_setup_ring()
Pull drm fixes from Dave Airlie:
"Regular fixes for the week, i915, mediatek, hisilicon, mgag200 and
panel have some small fixes.
amdgpu has more stack size fixes for clang build, and fixes for new
IPs, but all with low regression chances since they are for stuff new
in v6.0.
i915:
- avoid a general protection failure when using perf/OA
- avoid kernel warnings on driver release
amdgpu:
- SDMA 6.x fix
- GPUVM TF fix
- DCN 3.2.x fixes
- DCN 3.1.x fixes
- SMU 13.x fixes
- Clang stack size fixes for recently enabled DML code
- Fix drm dirty callback change on non-atomic cases
- USB4 display fix
mediatek:
- dsi: Add atomic {destroy,duplicate}_state, reset callbacks
- dsi: Move mtk_dsi_stop() call back to mtk_dsi_poweroff()
- Fix wrong dither settings
hisilicon:
- Depend on MMU
mgag200:
- Fix console on G200ER
panel:
- Fix innolux_g121i1_l01 bus format"
* tag 'drm-fixes-2022-09-23-1' of git://anongit.freedesktop.org/drm/drm: (30 commits)
MAINTAINERS: switch graphics to airlied other addresses
drm/mediatek: dsi: Move mtk_dsi_stop() call back to mtk_dsi_poweroff()
drm/amd/display: Reduce number of arguments of dml314's CalculateFlipSchedule()
drm/amd/display: Reduce number of arguments of dml314's CalculateWatermarksAndDRAMSpeedChangeSupport()
drm/amdgpu: don't register a dirty callback for non-atomic
drm/amd/pm: drop the pptable related workarounds for SMU 13.0.0
drm/amd/pm: add support for 3794 pptable for SMU13.0.0
drm/amd/display: correct num_dsc based on HW cap
drm/amd/display: Disable OTG WA for the plane_state NULL case on DCN314
drm/amd/display: Add shift and mask for ICH_RESET_AT_END_OF_LINE
drm/amd/display: increase dcn315 pstate change latency
drm/amd/display: Fix DP MST timeslot issue when fallback happened
drm/amd/display: Display distortion after hotplug 5K tiled display
drm/amd/display: Update dummy P-state search to use DCN32 DML
drm/amd/display: skip audio setup when audio stream is enabled
drm/amd/display: update gamut remap if plane has changed
drm/amd/display: Assume an LTTPR is always present on fixed_vs links
drm/amd/display: fix dcn315 memory channel count and width read
drm/amd/display: Fix double cursor on non-video RGB MPO
drm/amd/display: Only consider pixle rate div policy for DCN32+
...
Qualcomm ARM64 DTS fixes for 6.0
This corrects invalid IOMMU streams for the SM8150 CDSP FastRPC, moves
the wakeup-source of SC7280 USB nodes to the correct place, fixes the
SM8350 UFS PHY serdes size to not overlap with the other subnodes and
updates the firmware location for the Lenovo ThinkPad X13s to match the
movement in linux-firmware.
It also updates MAINTAINERS and .mailmap to reflect the changes in my
email address.
* tag 'qcom-arm64-fixes-for-6.0' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sm8350: fix UFS PHY serdes size
arm64: dts: qcom: sc8280xp-x13s: Update firmware location
MAINTAINERS: Update Bjorn's email address
arm64: dts: qcom: sc7280: move USB wakeup-source property
arm64: dts: qcom: thinkpad-x13s: Fix firmware location
arm64: dts: qcom: sm8150: Fix fastrpc iommu values
Link: https://lore.kernel.org/r/20220921142939.1310163-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This reverts commit 211f276ed3.
For quite some time, core DRM helpers already ensure that any relevant
connectors/CRTCs/etc. are disabled, as well as their associated
components (e.g., bridges) when suspending the system. Thus,
analogix_dp_bridge_{enable,disable}() already get called, which in turn
call drm_panel_{prepare,unprepare}(). This makes these drm_panel_*()
calls redundant.
Besides redundancy, there are a few problems with this handling:
(1) drm_panel_{prepare,unprepare}() are *not* reference-counted APIs and
are not in general designed to be handled by multiple callers --
although some panel drivers have a coarse 'prepared' flag that mitigates
some damage, at least. So at a minimum this is redundant and confusing,
but in some cases, this could be actively harmful.
(2) The error-handling is a bit non-standard. We ignored errors in
suspend(), but handled errors in resume(). And recently, people noticed
that the clk handling is unbalanced in error paths, and getting *that*
right is not actually trivial, given the current way errors are mostly
ignored.
(3) In the particular way analogix_dp_{suspend,resume}() get used (e.g.,
in rockchip_dp_*(), as a late/early callback), we don't necessarily have
a proper PM relationship between the DP/bridge device and the panel
device. So while the DP bridge gets resumed, the panel's parent device
(e.g., platform_device) may still be suspended, and so any prepare()
calls may fail.
So remove the superfluous, possibly-harmful suspend()/resume() handling
of panel state.
Fixes: 211f276ed3 ("drm: bridge: analogix/dp: add panel prepare/unprepare in suspend/resume time")
Link: https://lore.kernel.org/all/Yv2CPBD3Picg%2FgVe@google.com/
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220822180729.1.I8ac5abe3a4c1c6fd5c061686c6e883c22f69022c@changeid
The datasheet [1] explicit describes it as requirement for a reset.
[1] MT7531 Reference Manual for Development Board rev 1.0, page 735
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the PLL init of the switch out of the pad configuration of the port
6 (usally cpu port).
Fix a unidirectional 100 mbit limitation on 1 gbit or 2.5 gbit links for
outbound traffic on port 5 or port 6.
Fixes: c288575f78 ("net: dsa: mt7530: Add the support of MT7531 switch")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit bbb774d921 ("net: Add tests for bonding and team address list
management") adds the net team driver tests in the directory:
tools/testing/selftests/drivers/net/team/
The file entry in MAINTAINERS for the TEAM DRIVER however refers to:
tools/testing/selftests/net/team/
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken file pattern.
Repair this file entry in TEAM DRIVER.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Benjamin Poirier <bpoirier@nvidia.com>
Link: https://lore.kernel.org/r/20220922114053.10883-1-lukas.bulwahn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Two fixes for omaps
A fix to remove usb4 from am5748 as it does not exist on the SoC, and
a fix for am335x mmc dma that wired direct and should not use the xbar.
Note that the am5748 fix depends on the recent deferred probe regression
fixes to boot. I ended up picking the merge commit to base it on as it
describes what got fixed quite nicely rather than a -rc tag.
* tag 'omap-for-6.0/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am5748: keep usb4_tm disabled
ARM: dts: am33xx: Fix MMCHS0 dma properties
Link: https://lore.kernel.org/r/pull-1663140667-273537@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When GEM is in SGMII mode and disabled as a wakeup source, the power
management controller can power down the entire full power domain(FPD)
if none of the FPD devices are in use.
Incase of FPD off, there are below ethernet link up issues on non-wakeup
suspend/resume. To fix it add phy_exit() in suspend and phy_init() in the
resume path which reinitializes PS GTR SGMII lanes.
$ echo +20 > /sys/class/rtc/rtc0/wakealarm
$ echo mem > /sys/power/state
After resume:
$ ifconfig eth0 up
xilinx-psgtr fd400000.phy: lane 0 (type 10, protocol 5): PLL lock timeout
phy phy-fd400000.phy.0: phy poweron failed --> -110
xilinx-psgtr fd400000.phy: lane 0 (type 10, protocol 5): PLL lock timeout
SIOCSIFFLAGS: Connection timed out
phy phy-fd400000.phy.0: phy poweron failed --> -110
Fixes: 8b73fa3ae0 ("net: macb: Added ZynqMP-specific initialization")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This change adds support for not enabling carrier during TUNSETIFF
interface creation by specifying the IFF_NO_CARRIER flag.
Our tests make heavy use of tun interfaces. In some scenarios, the test
process creates the interface but another process brings it up after the
interface is discovered via netlink notification. In that case, it is
not possible to create a tun/tap interface with carrier off without it
racing against the bring up. Immediately setting carrier off via
TUNSETCARRIER is still too late.
Signed-off-by: Patrick Rohr <prohr@google.com>
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit a3b884cef8 ("firmware: arm_scmi: Add clock management
to the SCMI power domain").
Using the GENPD_FLAG_PM_CLK tells genpd to gate/ungate the consumer
device's clock(s) during runtime suspend/resume through the PM clock API.
More precisely, in genpd_runtime_resume() the clock(s) for the consumer
device would become ungated prior to the driver-level ->runtime_resume()
callbacks gets invoked.
This behaviour isn't a good fit for all platforms/drivers. For example, a
driver may need to make some preparations of its device in its
->runtime_resume() callback, like calling clk_set_rate() before the
clock(s) should be ungated. In these cases, it's easier to let the clock(s)
to be managed solely by the driver, rather than at the PM domain level.
For these reasons, let's drop the use GENPD_FLAG_PM_CLK for the SCMI PM
domain, as to enable it to be more easily adopted across ARM platforms.
Fixes: a3b884cef8 ("firmware: arm_scmi: Add clock management to the SCMI power domain")
Cc: Nicolas Pitre <npitre@baylibre.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20220919122033.86126-1-ulf.hansson@linaro.org
Pull SCSI fixes from James Bottomley:
"Three small and pretty obvious fixes, all in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpt3sas: Fix return value check of dma_get_required_mask()
scsi: qla2xxx: Fix memory leak in __qlt_24xx_handle_abts()
scsi: qedf: Fix a UAF bug in __qedf_probe()
Pull slab fixes from Vlastimil Babka:
- Fix a possible use-after-free in SLUB's kmem_cache removal,
introduced in this cycle, by Feng Tang.
- WQ_MEM_RECLAIM dependency fix for the workqueue-based cpu slab
flushing introduced in 5.15, by Maurizio Lombardi.
- Add missing KASAN hooks in two kmalloc entry paths, by Peter
Collingbourne.
- A BUG_ON() removal in SLUB's kmem_cache creation when allocation
fails (too small to possibly happen in practice, syzbot used fault
injection), by Chao Yu.
* tag 'slab-for-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm: slub: fix flush_cpu_slab()/__free_slab() invocations in task context.
mm/slab_common: fix possible double free of kmem_cache
kasan: call kasan_malloc() from __kmalloc_*track_caller()
mm/slub: fix to return errno if kmalloc() fails
Inject #UD when emulating XSETBV if CR4.OSXSAVE is not set. This also
covers the "XSAVE not supported" check, as setting CR4.OSXSAVE=1 #GPs if
XSAVE is not supported (and userspace gets to keep the pieces if it
forces incoherent vCPU state).
Add a comment to kvm_emulate_xsetbv() to call out that the CPU checks
CR4.OSXSAVE before checking for intercepts. AMD'S APM implies that #UD
has priority (says that intercepts are checked before #GP exceptions),
while Intel's SDM says nothing about interception priority. However,
testing on hardware shows that both AMD and Intel CPUs prioritize the #UD
over interception.
Fixes: 02d4160fbd ("x86: KVM: add xsetbv to the emulator")
Cc: stable@vger.kernel.org
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220824033057.3576315-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow FP and SSE state to be saved and restored via KVM_{G,SET}_XSAVE on
XSAVE-capable hosts even if their bits are not exposed to the guest via
XCR0.
Failing to allow FP+SSE first showed up as a QEMU live migration failure,
where migrating a VM from a pre-XSAVE host, e.g. Nehalem, to an XSAVE
host failed due to KVM rejecting KVM_SET_XSAVE. However, the bug also
causes problems even when migrating between XSAVE-capable hosts as
KVM_GET_SAVE won't set any bits in user_xfeatures if XSAVE isn't exposed
to the guest, i.e. KVM will fail to actually migrate FP+SSE.
Because KVM_{G,S}ET_XSAVE are designed to allowing migrating between
hosts with and without XSAVE, KVM_GET_XSAVE on a non-XSAVE (by way of
fpu_copy_guest_fpstate_to_uabi()) always sets the FP+SSE bits in the
header so that KVM_SET_XSAVE will work even if the new host supports
XSAVE.
Fixes: ad856280dd ("x86/kvm/fpu: Limit guest user_xfeatures to supported bits of XCR0")
bz: https://bugzilla.redhat.com/show_bug.cgi?id=2079311
Cc: stable@vger.kernel.org
Cc: Leonardo Bras <leobras@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
[sean: add comment, massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220824033057.3576315-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reinstate the per-vCPU guest_supported_xcr0 by partially reverting
commit 988896bb6182; the implicit assessment that guest_supported_xcr0 is
always the same as guest_fpu.fpstate->user_xfeatures was incorrect.
kvm_vcpu_after_set_cpuid() isn't the only place that sets user_xfeatures,
as user_xfeatures is set to fpu_user_cfg.default_features when guest_fpu
is allocated via fpu_alloc_guest_fpstate() => __fpstate_reset().
guest_supported_xcr0 on the other hand is zero-allocated. If userspace
never invokes KVM_SET_CPUID2, supported XCR0 will be '0', whereas the
allowed user XFEATURES will be non-zero.
Practically speaking, the edge case likely doesn't matter as no sane
userspace will live migrate a VM without ever doing KVM_SET_CPUID2. The
primary motivation is to prepare for KVM intentionally and explicitly
setting bits in user_xfeatures that are not set in guest_supported_xcr0.
Because KVM_{G,S}ET_XSAVE can be used to svae/restore FP+SSE state even
if the host doesn't support XSAVE, KVM needs to set the FP+SSE bits in
user_xfeatures even if they're not allowed in XCR0, e.g. because XCR0
isn't exposed to the guest. At that point, the simplest fix is to track
the two things separately (allowed save/restore vs. allowed XCR0).
Fixes: 988896bb61 ("x86/kvm/fpu: Remove kvm_vcpu_arch.guest_supported_xcr0")
Cc: stable@vger.kernel.org
Cc: Leonardo Bras <leobras@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220824033057.3576315-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The update to statistic max_mmu_rmap_size is unintentionally removed by
commit 4293ddb788 ("KVM: x86/mmu: Remove redundant spte present check
in mmu_set_spte"). Add missing update to it or max_mmu_rmap_size will
always be nonsensical 0.
Fixes: 4293ddb788 ("KVM: x86/mmu: Remove redundant spte present check in mmu_set_spte")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Message-Id: <20220907080657.42898-1-linmiaohe@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The following warning appears when executing:
make -C tools/testing/selftests/kvm
rseq_test.c: In function ‘main’:
rseq_test.c:237:33: warning: implicit declaration of function ‘gettid’; did you mean ‘getgid’? [-Wimplicit-function-declaration]
(void *)(unsigned long)gettid());
^~~~~~
getgid
/usr/bin/ld: /tmp/ccr5mMko.o: in function `main':
../kvm/tools/testing/selftests/kvm/rseq_test.c:237: undefined reference to `gettid'
collect2: error: ld returned 1 exit status
make: *** [../lib.mk:173: ../kvm/tools/testing/selftests/kvm/rseq_test] Error 1
Use the more compatible syscall(SYS_gettid) instead of gettid() to fix it.
More subsequent reuse may cause it to be wrapped in a lib file.
Signed-off-by: Jinrong Liang <cloudliang@tencent.com>
Message-Id: <20220802071240.84626-1-cloudliang@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 5a836bf6b0 ("mm: slub: move flush_cpu_slab() invocations
__free_slab() invocations out of IRQ context") moved all flush_cpu_slab()
invocations to the global workqueue to avoid a problem related
with deactivate_slab()/__free_slab() being called from an IRQ context
on PREEMPT_RT kernels.
When the flush_all_cpu_locked() function is called from a task context
it may happen that a workqueue with WQ_MEM_RECLAIM bit set ends up
flushing the global workqueue, this will cause a dependency issue.
workqueue: WQ_MEM_RECLAIM nvme-delete-wq:nvme_delete_ctrl_work [nvme_core]
is flushing !WQ_MEM_RECLAIM events:flush_cpu_slab
WARNING: CPU: 37 PID: 410 at kernel/workqueue.c:2637
check_flush_dependency+0x10a/0x120
Workqueue: nvme-delete-wq nvme_delete_ctrl_work [nvme_core]
RIP: 0010:check_flush_dependency+0x10a/0x120[ 453.262125] Call Trace:
__flush_work.isra.0+0xbf/0x220
? __queue_work+0x1dc/0x420
flush_all_cpus_locked+0xfb/0x120
__kmem_cache_shutdown+0x2b/0x320
kmem_cache_destroy+0x49/0x100
bioset_exit+0x143/0x190
blk_release_queue+0xb9/0x100
kobject_cleanup+0x37/0x130
nvme_fc_ctrl_free+0xc6/0x150 [nvme_fc]
nvme_free_ctrl+0x1ac/0x2b0 [nvme_core]
Fix this bug by creating a workqueue for the flush operation with
the WQ_MEM_RECLAIM bit set.
Fixes: 5a836bf6b0 ("mm: slub: move flush_cpu_slab() invocations __free_slab() invocations out of IRQ context")
Cc: <stable@vger.kernel.org>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Pull ARM SoC fixes from Arnd Bergmann:
"Another set of fixes for fixes for the soc tree:
- A fix for the interrupt number on at91/lan966 ethernet PHYs
- A second round of fixes for NXP i.MX series, including a couple of
build issues, and board specific DT corrections on TQMa8MPQL,
imx8mp-venice-gw74xx and imx8mm-verdin for reliability and
partially broken functionality
- Several fixes for Rockchip SoCs, addressing a USB issue on
BPI-R2-Pro, wakeup on Gru-Bob and reliability of high-speed SD
cards, among other minor issues
- A fix for a long-running naming mistake that prevented the moxart
mmc driver from working at all
- Multiple Arm SCMI firmware fixes for hardening some corner cases"
* tag 'soc-fixes-6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
arm64: dts: imx8mp-venice-gw74xx: fix port/phy validation
ARM: dts: lan966x: Fix the interrupt number for internal PHYs
arm64: dts: imx8mp-venice-gw74xx: fix ksz9477 cpu port
arm64: dts: imx8mp-venice-gw74xx: fix CAN STBY polarity
dt-bindings: memory-controllers: fsl,imx8m-ddrc: drop Leonard Crestez
arm64: dts: tqma8mqml: Include phy-imx8-pcie.h header
arm64: defconfig: enable ARCH_NXP
arm64: dts: imx8mp-tqma8mpql-mba8mpxl: add missing pinctrl for RTC alarm
ARM: dts: fix Moxa SDIO 'compatible', remove 'sdhci' misnomer
arm64: dts: imx8mm-verdin: extend pmic voltages
arm64: dts: rockchip: Remove 'enable-active-low' from rk3566-quartz64-a
arm64: dts: rockchip: Remove 'enable-active-low' from rk3399-puma
arm64: dts: rockchip: fix property for usb2 phy supply on rk3568-evb1-v10
arm64: dts: rockchip: fix property for usb2 phy supply on rock-3a
arm64: dts: imx8ulp: add #reset-cells for pcc
arm64: dts: tqma8mpxl-ba8mpxl: Fix button GPIOs
arm64: dts: imx8mn: remove GPU power domain reset
arm64: dts: rockchip: Set RK3399-Gru PCLK_EDP to 24 MHz
arm64: dts: imx8mm: Reverse CPLD_Dn GPIO label mapping on MX8Menlo
arm64: dts: rockchip: fix upper usb port on BPI-R2-Pro
...
Pull networking fixes from Jakub Kicinski:
"Including fixes from wifi, netfilter and can.
A handful of awaited fixes here - revert of the FEC changes, bluetooth
fix, fixes for iwlwifi spew.
We added a warning in PHY/MDIO code which is triggering on a couple of
platforms in a false-positive-ish way. If we can't iron that out over
the week we'll drop it and re-add for 6.1.
I've added a new "follow up fixes" section for fixes to fixes in
6.0-rcs but it may actually give the false impression that those are
problematic or that more testing time would have caught them. So
likely a one time thing.
Follow up fixes:
- nf_tables_addchain: fix nft_counters_enabled underflow
- ebtables: fix memory leak when blob is malformed
- nf_ct_ftp: fix deadlock when nat rewrite is needed
Current release - regressions:
- Revert "fec: Restart PPS after link state change" and the related
"net: fec: Use a spinlock to guard `fep->ptp_clk_on`"
- Bluetooth: fix HCIGETDEVINFO regression
- wifi: mt76: fix 5 GHz connection regression on mt76x0/mt76x2
- mptcp: fix fwd memory accounting on coalesce
- rwlock removal fall out:
- ipmr: always call ip{,6}_mr_forward() from RCU read-side
critical section
- ipv6: fix crash when IPv6 is administratively disabled
- tcp: read multiple skbs in tcp_read_skb()
- mdio_bus_phy_resume state warning fallout:
- eth: ravb: fix PHY state warning splat during system resume
- eth: sh_eth: fix PHY state warning splat during system resume
Current release - new code bugs:
- wifi: iwlwifi: don't spam logs with NSS>2 messages
- eth: mtk_eth_soc: enable XDP support just for MT7986 SoC
Previous releases - regressions:
- bonding: fix NULL deref in bond_rr_gen_slave_id
- wifi: iwlwifi: mark IWLMEI as broken
Previous releases - always broken:
- nf_conntrack helpers:
- irc: tighten matching on DCC message
- sip: fix ct_sip_walk_headers
- osf: fix possible bogus match in nf_osf_find()
- ipvlan: fix out-of-bound bugs caused by unset skb->mac_header
- core: fix flow symmetric hash
- bonding, team: unsync device addresses on ndo_stop
- phy: micrel: fix shared interrupt on LAN8814"
* tag 'net-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
selftests: forwarding: add shebang for sch_red.sh
bnxt: prevent skb UAF after handing over to PTP worker
net: marvell: Fix refcounting bugs in prestera_port_sfp_bind()
net: sched: fix possible refcount leak in tc_new_tfilter()
net: sunhme: Fix packet reception for len < RX_COPY_THRESHOLD
udp: Use WARN_ON_ONCE() in udp_read_skb()
selftests: bonding: cause oops in bond_rr_gen_slave_id
bonding: fix NULL deref in bond_rr_gen_slave_id
net: phy: micrel: fix shared interrupt on LAN8814
net/smc: Stop the CLC flow if no link to map buffers on
ice: Fix ice_xdp_xmit() when XDP TX queue number is not sufficient
net: atlantic: fix potential memory leak in aq_ndev_close()
can: gs_usb: gs_usb_set_phys_id(): return with error if identify is not supported
can: gs_usb: gs_can_open(): fix race dev->can.state condition
can: flexcan: flexcan_mailbox_read() fix return value for drop = true
net: sh_eth: Fix PHY state warning splat during system resume
net: ravb: Fix PHY state warning splat during system resume
netfilter: nf_ct_ftp: fix deadlock when nat rewrite is needed
netfilter: ebtables: fix memory leak when blob is malformed
netfilter: nf_tables: fix percpu memory leak at nf_tables_addchain()
...
Pull EFI fixes from Ard Biesheuvel:
- Use the right variable to check for shim insecure mode
- Wipe setup_data field when booting via EFI
- Add missing error check to efibc driver
* tag 'efi-urgent-for-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: libstub: check Shim mode using MokSBStateRT
efi: x86: Wipe setup_data on pure EFI boot
efi: efibc: Guard against allocation failure
Pull gpio fixes from Bartosz Golaszewski:
- fix a NULL-pointer dereference at driver unbind and a potential
resource leak in error path in gpio-mockup
- make the irqchip immutable in gpio-ftgpio010
- fix dereferencing a potentially uninitialized variable in gpio-tqmx86
- fix interrupt registering in gpiolib's character device code
* tag 'gpio-fixes-for-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: cdev: Set lineevent_state::irq after IRQ register successfully
gpio: tqmx86: fix uninitialized variable girq
gpio: ftgpio010: Make irqchip immutable
gpio: mockup: Fix potential resource leakage when register a chip
gpio: mockup: fix NULL pointer dereference when removing debugfs
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix polling of system-wide events related to mixing per-cpu and
per-thread events.
- Do not check if /proc/modules is unchanged when copying /proc/kcore,
that doesn't get in the way of post processing analysis.
- Include program header in ELF files generated for JIT files, so that
they can be opened by tools using elfutils libraries.
- Enter namespaces when synthesizing build-ids.
- Fix some bugs related to a recent cpu_map overhaul where we should be
using an index and not the cpu number.
- Fix BPF program ELF section name, using the naming expected by libbpf
when using BPF counters in 'perf stat'.
- Add a new test for perf stat cgroup BPF counter.
- Adjust check on 'perf test wp' for older kernels, where the
PERF_EVENT_IOC_MODIFY_ATTRIBUTES ioctl isn't supported.
- Sync x86 cpufeatures with the kernel sources, no changes in tooling.
* tag 'perf-tools-fixes-for-v6.0-2022-09-21' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf tools: Honor namespace when synthesizing build-ids
tools headers cpufeatures: Sync with the kernel sources
perf kcore_copy: Do not check /proc/modules is unchanged
libperf evlist: Fix polling of system-wide events
perf record: Fix cpu mask bit setting for mixed mmaps
perf test: Skip wp modify test on old kernels
perf jit: Include program header in ELF files
perf test: Add a new test for perf stat cgroup BPF counter
perf stat: Use evsel->core.cpus to iterate cpus in BPF cgroup counters
perf stat: Fix cpu map index in bperf cgroup code
perf stat: Fix BPF program section name
This patch avoids threads live-locking for hours when a large number
threads are competing over the last few free extents as they blocks
getting added and removed from preallocation pools. From our bug
reporter:
A reliable way for triggering this has multiple writers
continuously write() to files when the filesystem is full, while
small amounts of space are freed (e.g. by truncating a large file
-1MiB at a time). In the local filesystem, this can be done by
simply not checking the return code of write (0) and/or the error
(ENOSPACE) that is set. Over NFS with an async mount, even clients
with proper error checking will behave this way since the linux NFS
client implementation will not propagate the server errors [the
write syscalls immediately return success] until the file handle is
closed. This leads to a situation where NFS clients send a
continuous stream of WRITE rpcs which result in ERRNOSPACE -- but
since the client isn't seeing this, the stream of writes continues
at maximum network speed.
When some space does appear, multiple writers will all attempt to
claim it for their current write. For NFS, we may see dozens to
hundreds of threads that do this.
The real-world scenario of this is database backup tooling (in
particular, github.com/mdkent/percona-xtrabackup) which may write
large files (>1TiB) to NFS for safe keeping. Some temporary files
are written, rewound, and read back -- all before closing the file
handle (the temp file is actually unlinked, to trigger automatic
deletion on close/crash.) An application like this operating on an
async NFS mount will not see an error code until TiB have been
written/read.
The lockup was observed when running this database backup on large
filesystems (64 TiB in this case) with a high number of block
groups and no free space. Fragmentation is generally not a factor
in this filesystem (~thousands of large files, mostly contiguous
except for the parts written while the filesystem is at capacity.)
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
RHEL/Fedora RPM build checks are stricter, and complain when executable
files don't have a shebang line, e.g.
*** WARNING: ./kselftests/net/forwarding/sch_red.sh is executable but has no shebang, removing executable bit
Fix it by adding shebang line.
Fixes: 6cf0291f95 ("selftests: forwarding: Add a RED test for SW datapath")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20220922024453.437757-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When reading the timestamp is required bnxt_tx_int() hands
over the ownership of the completed skb to the PTP worker.
The skb should not be used afterwards, as the worker may
run before the rest of our code and free the skb, leading
to a use-after-free.
Since dev_kfree_skb_any() accepts NULL make the loss of
ownership more obvious and set skb to NULL.
Fixes: 83bb623c96 ("bnxt_en: Transmit and retrieve packet timestamps")
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20220921201005.335390-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In prestera_port_sfp_bind(), there are two refcounting bugs:
(1) we should call of_node_get() before of_find_node_by_name() as
it will automaitcally decrease the refcount of 'from' argument;
(2) we should call of_node_put() for the break of the iteration
for_each_child_of_node() as it will automatically increase and
decrease the 'child'.
Fixes: 52323ef754 ("net: marvell: prestera: add phylink support")
Signed-off-by: Liang He <windhl@126.com>
Reviewed-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Link: https://lore.kernel.org/r/20220921133245.4111672-1-windhl@126.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a separate receive path for small packets (under 256 bytes).
Instead of allocating a new dma-capable skb to be used for the next packet,
this path allocates a skb and copies the data into it (reusing the existing
sbk for the next packet). There are two bytes of junk data at the beginning
of every packet. I believe these are inserted in order to allow aligned DMA
and IP headers. We skip over them using skb_reserve. Before copying over
the data, we must use a barrier to ensure we see the whole packet. The
current code only synchronizes len bytes, starting from the beginning of
the packet, including the junk bytes. However, this leaves off the final
two bytes in the packet. Synchronize the whole packet.
To reproduce this problem, ping a HME with a payload size between 17 and
214
$ ping -s 17 <hme_address>
which will complain rather loudly about the data mismatch. Small packets
(below 60 bytes on the wire) do not have this issue. I suspect this is
related to the padding added to increase the minimum packet size.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220920235018.1675956-1-seanga2@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johan writes:
"USB-serial fixes for 6.0-rc7
Here are some new modem device ids.
All have been in linux-next with no reported issues."
* tag 'usb-serial-6.0-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add Quectel RM520N
USB: serial: option: add Quectel BG95 0x0203 composition
Jonathan Toppins says:
====================
bonding: fix NULL deref in bond_rr_gen_slave_id
Fix a NULL dereference of the struct bonding.rr_tx_counter member because
if a bond is initially created with an initial mode != zero (Round Robin)
the memory required for the counter is never created and when the mode is
changed there is never any attempt to verify the memory is allocated upon
switching modes.
====================
Link: https://lore.kernel.org/r/cover.1663694476.git.jtoppins@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This bonding selftest used to cause a kernel oops on aarch64
and should be architectures agnostic.
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CMN-600 uses bits [27:0] for child node address offset while bits [30:28]
are required to be zero.
For CMN-650, the child node address offset field has been increased
to include bits [29:0] while leaving only bit 30 set to zero.
Let's include the missing two bits and assume older implementations
comply with the spec and set bits [29:28] to 0.
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Fixes: 60d1504070 ("perf/arm-cmn: Support new IP features")
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20220808195455.79277-1-ilkka@os.amperecomputing.com
Signed-off-by: Will Deacon <will@kernel.org>
Building without CONFIG_POWER_SUPPLY will fail:
drivers/usb/typec/anx7411.o: In function `anx7411_detect_power_mode':
anx7411.c:(.text+0x527): undefined reference to `power_supply_changed'
drivers/usb/typec/anx7411.o: In function `anx7411_psy_set_prop':
anx7411.c:(.text+0x90d): undefined reference to `power_supply_get_drvdata'
anx7411.c:(.text+0x930): undefined reference to `power_supply_changed'
drivers/usb/typec/anx7411.o: In function `anx7411_psy_get_prop':
anx7411.c:(.text+0x94d): undefined reference to `power_supply_get_drvdata'
drivers/usb/typec/anx7411.o: In function `anx7411_i2c_probe':
anx7411.c:(.text+0x111d): undefined reference to
`devm_power_supply_register'
drivers/usb/typec/anx7411.o: In function `anx7411_work_func':
anx7411.c:(.text+0x167c): undefined reference to `power_supply_changed'
anx7411.c:(.text+0x1b55): undefined reference to `power_supply_changed'
Add POWER_SUPPLY dependency to Kconfig.
Fixes: fe6d8a9c8e ("usb: typec: anx7411: Add Analogix PD ANX7411 support")
Reviewed-by: Xin Ji <xji@analogixsemi.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Ren Zhijie <renzhijie2@huawei.com>
Link: https://lore.kernel.org/r/20220920084431.196258-1-renzhijie2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
cpufreq_get_hw_max_freq() returns max frequency in kHz as *unsigned int*,
while freq_inv_set_max_ratio() gets passed this frequency in Hz as 'u64'.
Multiplying max frequency by 1000 can potentially result in overflow --
multiplying by 1000ULL instead should avoid that...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Fixes: cd0ed03a89 ("arm64: use activity monitors for frequency invariance")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/01493d64-2bce-d968-86dc-11a122a9c07d@omp.ru
Signed-off-by: Will Deacon <will@kernel.org>
Since commit:
47546a1912 ("arm64: mm: install KPTI nG mappings with MMU enabled)"
... when building with CONFIG_DEBUG_ATOMIC_SLEEP=y and booting under
QEMU TCG with '-cpu max', there's a boot-time splat:
| BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
| in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 15, name: migration/0
| preempt_count: 1, expected: 0
| RCU nest depth: 0, expected: 0
| no locks held by migration/0/15.
| irq event stamp: 28
| hardirqs last enabled at (27): [<ffff8000091ed180>] _raw_spin_unlock_irq+0x3c/0x7c
| hardirqs last disabled at (28): [<ffff8000081b8d74>] multi_cpu_stop+0x150/0x18c
| softirqs last enabled at (0): [<ffff80000809a314>] copy_process+0x594/0x1964
| softirqs last disabled at (0): [<0000000000000000>] 0x0
| CPU: 0 PID: 15 Comm: migration/0 Not tainted 6.0.0-rc3-00002-g419b42ff7eef #3
| Hardware name: linux,dummy-virt (DT)
| Stopper: multi_cpu_stop+0x0/0x18c <- stop_cpus.constprop.0+0xa0/0xfc
| Call trace:
| dump_backtrace.part.0+0xd0/0xe0
| show_stack+0x1c/0x5c
| dump_stack_lvl+0x88/0xb4
| dump_stack+0x1c/0x38
| __might_resched+0x180/0x230
| __might_sleep+0x4c/0xa0
| __mutex_lock+0x5c/0x450
| mutex_lock_nested+0x30/0x40
| create_kpti_ng_temp_pgd+0x4fc/0x6d0
| kpti_install_ng_mappings+0x2b8/0x3b0
| cpu_enable_non_boot_scope_capabilities+0x7c/0xd0
| multi_cpu_stop+0xa0/0x18c
| cpu_stopper_thread+0x88/0x11c
| smpboot_thread_fn+0x1ec/0x290
| kthread+0x118/0x120
| ret_from_fork+0x10/0x20
Since commit:
ee017ee353 ("arm64/mm: avoid fixmap race condition when create pud mapping")
... once the kernel leave the SYSTEM_BOOTING state, the fixmap pagetable
entries are protected by the fixmap_lock mutex.
The new KPTI rewrite code uses __create_pgd_mapping() to create a
temporary pagetable. This happens in atomic context, after secondary
CPUs are brought up and the kernel has left the SYSTEM_BOOTING state.
Hence we try to acquire a mutex in atomic context, which is generally
unsound (though benign in this case as the mutex should be free and all
other CPUs are quiescent).
This patch avoids the issue by pulling the mutex out of alloc_init_pud()
and calling it at a higher level in the pagetable manipulation code.
This allows it to be used without locking where one CPU is known to be
in exclusive control of the machine, even after having left the
SYSTEM_BOOTING state.
Fixes: 47546a1912 ("arm64: mm: install KPTI nG mappings with MMU enabled")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20220920134731.1625740-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
If any software has interacted with the USB4 registers before the Linux
USB4 CM runs, it may have modified the plug events delay. It has been
observed that if this value too large, it's possible that hotplugged
devices will negotiate a fallback mode instead in Linux.
To prevent this, explicitly align the plug events delay with the USB4
spec value of 10ms.
Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
There might be a potential race between SMC-R buffer map and
link group termination.
smc_smcr_terminate_all() | smc_connect_rdma()
--------------------------------------------------------------
| smc_conn_create()
for links in smcibdev |
schedule links down |
| smc_buf_create()
| \- smcr_buf_map_usable_links()
| \- no usable links found,
| (rmb->mr = NULL)
|
| smc_clc_send_confirm()
| \- access conn->rmb_desc->mr[]->rkey
| (panic)
During reboot and IB device module remove, all links will be set
down and no usable links remain in link groups. In such situation
smcr_buf_map_usable_links() should return an error and stop the
CLC flow accessing to uninitialized mr.
Fixes: b9247544c1 ("net/smc: convert static link ID instances to support multiple links")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Link: https://lore.kernel.org/r/1663656189-32090-1-git-send-email-guwen@linux.alibaba.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We currently check the MokSBState variable to decide whether we should
treat UEFI secure boot as being disabled, even if the firmware thinks
otherwise. This is used by shim to indicate that it is not checking
signatures on boot images. In the kernel, we use this to relax lockdown
policies.
However, in cases where shim is not even being used, we don't want this
variable to interfere with lockdown, given that the variable may be
non-volatile and therefore persist across a reboot. This means setting
it once will persistently disable lockdown checks on a given system.
So switch to the mirrored version of this variable, called MokSBStateRT,
which is supposed to be volatile, and this is something we can check.
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Peter Jones <pjones@redhat.com>
When booting the x86 kernel via EFI using the LoadImage/StartImage boot
services [as opposed to the deprecated EFI handover protocol], the setup
header is taken from the image directly, and given that EFI's LoadImage
has no Linux/x86 specific knowledge regarding struct bootparams or
struct setup_header, any absolute addresses in the setup header must
originate from the file and not from a prior loading stage.
Since we cannot generally predict where LoadImage() decides to load an
image (*), such absolute addresses must be treated as suspect: even if a
prior boot stage intended to make them point somewhere inside the
[signed] image, there is no way to validate that, and if they point at
an arbitrary location in memory, the setup_data nodes will not be
covered by any signatures or TPM measurements either, and could be made
to contain an arbitrary sequence of SETUP_xxx nodes, which could
interfere quite badly with the early x86 boot sequence.
(*) Note that, while LoadImage() does take a buffer/size tuple in
addition to a device path, which can be used to provide the image
contents directly, it will re-allocate such images, as the memory
footprint of an image is generally larger than the PE/COFF file
representation.
Cc: <stable@vger.kernel.org> # v5.10+
Link: https://lore.kernel.org/all/20220904165321.1140894-1-Jason@zx2c4.com/
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Using rbtree for sorting groups by average fragment size is relatively
expensive (needs rbtree update on every block freeing or allocation) and
leads to wide spreading of allocations because selection of block group
is very sentitive both to changes in free space and amount of blocks
allocated. Furthermore selecting group with the best matching average
fragment size is not necessary anyway, even more so because the
variability of fragment sizes within a group is likely large so average
is not telling much. We just need a group with large enough average
fragment size so that we have high probability of finding large enough
free extent and we don't want average fragment size to be too big so
that we are likely to find free extent only somewhat larger than what we
need.
So instead of maintaing rbtree of groups sorted by fragment size keep
bins (lists) or groups where average fragment size is in the interval
[2^i, 2^(i+1)). This structure requires less updates on block allocation
/ freeing, generally avoids chaotic spreading of allocations into block
groups, and still is able to quickly (even faster that the rbtree)
provide a block group which is likely to have a suitably sized free
space extent.
This patch reduces number of block groups used when untarring archive
with medium sized files (size somewhat above 64k which is default
mballoc limit for avoiding locality group preallocation) to about half
and thus improves write speeds for eMMC flash significantly.
Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@kernel.org
Reported-and-tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Link: https://lore.kernel.org/r/20220908092136.11770-5-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Curently we don't use any preallocation when a file is already closed
when allocating blocks (from writeback code when converting delayed
allocation). However for small files, using locality group preallocation
is actually desirable as that is not specific to a particular file.
Rather it is a method to pack small files together to reduce
fragmentation and for that the fact the file is closed is actually even
stronger hint the file would benefit from packing. So change the logic
to allow locality group preallocation in this case.
Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@kernel.org
Reported-and-tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Link: https://lore.kernel.org/r/20220908092136.11770-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
mb_set_largest_free_order() updates lists containing groups with largest
chunk of free space of given order. The way it updates it leads to
always moving the group to the tail of the list. Thus allocations
looking for free space of given order effectively end up cycling through
all groups (and due to initialization in last to first order). This
spreads allocations among block groups which reduces performance for
rotating disks or low-end flash media. Change
mb_set_largest_free_order() to only update lists if the order of the
largest free chunk in the group changed.
Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@kernel.org
Reported-and-tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Link: https://lore.kernel.org/r/20220908092136.11770-2-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
One of the side-effects of mb_optimize_scan was that the optimized
functions to select next group to try were called even before we tried
the goal group. As a result we no longer allocate files close to
corresponding inodes as well as we don't try to expand currently
allocated extent in the same group. This results in reaim regression
with workfile.disk workload of upto 8% with many clients on my test
machine:
baseline mb_optimize_scan
Hmean disk-1 2114.16 ( 0.00%) 2099.37 ( -0.70%)
Hmean disk-41 87794.43 ( 0.00%) 83787.47 * -4.56%*
Hmean disk-81 148170.73 ( 0.00%) 135527.05 * -8.53%*
Hmean disk-121 177506.11 ( 0.00%) 166284.93 * -6.32%*
Hmean disk-161 220951.51 ( 0.00%) 207563.39 * -6.06%*
Hmean disk-201 208722.74 ( 0.00%) 203235.59 ( -2.63%)
Hmean disk-241 222051.60 ( 0.00%) 217705.51 ( -1.96%)
Hmean disk-281 252244.17 ( 0.00%) 241132.72 * -4.41%*
Hmean disk-321 255844.84 ( 0.00%) 245412.84 * -4.08%*
Also this is causing huge regression (time increased by a factor of 5 or
so) when untarring archive with lots of small files on some eMMC storage
cards.
Fix the problem by making sure we try goal group first.
Fixes: 196e402adf ("ext4: improve cr 0 / cr 1 group scanning")
CC: stable@kernel.org
Reported-and-tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Link: https://lore.kernel.org/all/20220727105123.ckwrhbilzrxqpt24@quack3/
Link: https://lore.kernel.org/all/0d81a7c2-46b7-6010-62a4-3e6cfc1628d6@i2se.com/
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220908092136.11770-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-09-20 (ice)
Michal re-sets TC configuration when changing number of queues.
Mateusz moves the check and call for link-down-on-close to the specific
path for downing/closing the interface.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix interface being down after reset with link-down-on-close flag on
ice: config netdev tc before setting queues number
====================
Link: https://lore.kernel.org/r/20220920205344.1860934-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The original patch added the static branch to handle the situation,
when assigning an XDP TX queue to every CPU is not possible,
so they have to be shared.
However, in the XDP transmit handler ice_xdp_xmit(), an error was
returned in such cases even before static condition was checked,
thus making queue sharing still impossible.
Fixes: 22bf877e52 ("ice: introduce XDP_TX fallback path")
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/r/20220919134346.25030-1-larysa.zaremba@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-09-19 (iavf, i40e)
Norbert adds checking of buffer size for Rx buffer checks in iavf.
Michal corrects setting of max MTU in iavf to account for MTU data provided
by PF, fixes i40e to set VF max MTU, and resolves lack of rate limiting
when value was less than divisor for i40e.
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
i40e: Fix set max_tx_rate when it is lower than 1 Mbps
i40e: Fix VF set max MTU size
iavf: Fix set max MTU size with port VLAN and jumbo frames
iavf: Fix bad page state
====================
Link: https://lore.kernel.org/r/20220919223428.572091-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As the comment right before the mtk_dsi_stop() call advises,
mtk_dsi_stop() should only be called after
mtk_drm_crtc_atomic_disable(). That's because that function calls
drm_crtc_wait_one_vblank(), which requires the vblank irq to be enabled.
Previously mtk_dsi_stop(), being in mtk_dsi_poweroff() and guarded by a
refcount, would only be called at the end of
mtk_drm_crtc_atomic_disable(), through the call to mtk_crtc_ddp_hw_fini().
Commit cde7e2e35c ("drm/mediatek: Separate poweron/poweroff from
enable/disable and define new funcs") moved the mtk_dsi_stop() call to
mtk_output_dsi_disable(), causing it to be called before
mtk_drm_crtc_atomic_disable(), and consequently generating vblank
timeout warnings during suspend.
Move the mtk_dsi_stop() call back to mtk_dsi_poweroff() so that we have
a working vblank irq during mtk_drm_crtc_atomic_disable() and stop
getting vblank timeout warnings.
Fixes: cde7e2e35c ("drm/mediatek: Separate poweron/poweroff from enable/disable and define new funcs")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Link: http://lists.infradead.org/pipermail/linux-mediatek/2022-August/046713.html
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Most of the arguments are identical between the two call sites and they
can be accessed through the 'struct vba_vars_st' pointer. This reduces
the total amount of stack space that
dml314_ModeSupportAndSystemConfigurationFull() uses by 112 bytes with
LLVM 16 (1976 -> 1864), helping clear up the following clang warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/display_mode_vba_314.c:4020:6: error: stack frame size (2216) exceeds limit (2048) in 'dml314_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
void dml314_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
^
1 error generated.
Link: https://github.com/ClangBuiltLinux/linux/issues/1710
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Tested-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Most of the arguments are identical between the two call sites and they
can be accessed through the 'struct vba_vars_st' pointer. This reduces
the total amount of stack space that
dml314_ModeSupportAndSystemConfigurationFull() uses by 240 bytes with
LLVM 16 (2216 -> 1976), helping clear up the following clang warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/display_mode_vba_314.c:4020:6: error: stack frame size (2216) exceeds limit (2048) in 'dml314_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
void dml314_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
^
1 error generated.
Link: https://github.com/ClangBuiltLinux/linux/issues/1710
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Tested-by: Maíra Canal <mairacanal@riseup.net>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
This shouldn't trigger during tiled display hotplug/unplug but it does
because one of the tiles can end up with a NULL plane state.
This also doesn't guard against the hang that it was originally trying
to resolve, and can instead cause DIO corruption due to OTG sync
being lost.
[How]
This was reverted at one point out of DCN31 so revert it here too.
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
When USB4 DP link training failed and fell back to lower link rate,
the time slot calculation uses the verified_link_cap.
And the verified_link_cap was not updated to the new one.
It caused the wrong VC payload time-slot was allocated.
[How]
Updated verified_link_cap with the new one from cur_link_settings
after the LT completes successfully.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During hot plug of specific 5K tiled display, sometimes both the tiles
are not synchronized resulting in distortion. The reason is that otgs of
both the tiles goes out of sync when otg workaround (dcnxxx_disable_otg_wa)
is applied for bandwidth optimization. The otg workaround reenables otg
but otg synchronization context is not reset and hence dc_trigger_sync()
does not resynchronize otg again.
[How]
Implement reset_sync_context_for_pipe() to reset the otg synchronization
context for the disabled pipe and its slave pipes when otg workaround is
applied.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Current DCN3.2 logic for finding the dummy P-state index uses the
DCN3.0 DML validation function instead of DCN3.2 DML.
This can result in either unexpected DML VBA values, or unexpected
dummy P-state index to be used.
[How]
Update the dummy P-state logic to use DCN3.2 DML validation function.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
We have minimal pipe split transition method to avoid pipe
allocation outage.However, this method will invoke audio setup
which cause audio output stuck once pipe reallocate.
[how]
skip audio setup for pipelines which audio stream has been enabled
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: zhikzhai <zhikai.zhai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The desktop plane and full-screen game plane may have different
gamut remap coefficients, if switching between desktop and
full-screen game without updating the gamut remap will cause
incorrect color.
[How]
Update gamut remap if planes change.
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
LTTPRs can in very rare instsances fail to increment DPCD LTTPR count.
This results in aux-i LTTPR requests to be sent to the wrong DPCD
address, which causes link training failure.
[HOW]
Override internal repeater count if fixed_vs flag is set for a given link
Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DC makes use of layer_index (zpos) when picking the HW plane to enable
HW cursor on. However, some compositors will not attach zpos information
to each DRM plane. Consequently, in amdgpu, we default layer_index to 0
and do not update it.
This causes said DC logic to enable HW cursor on all planes of the same
layer_index, which manifests as a double cursor issue if one of the
planes is scaled (and hence scaling the cursor as well).
[How]
Use DRM core helpers to calculate a normalized_zpos value for each
drm_plane_state under each crtc, within the atomic state.
This helper will first consider existing zpos values, and if
identical/unset, fallback to plane ID ordering.
The normalized_zpos is then passed to dc_plane_info during atomic check
for later use by the cursor logic.
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
420 modes are limited by FMT buffer width of 4096
which requires multi-pipe support in form of ODM
combine. If 420 modes have greater HActive than
4096, the DML logic should accomodate whether
it should be rejected, or ODM combine 2:1 or 4:1
is triggered accordingly.
[How]
FMT Buffer limit of 4096 in DCN32. Force ODM
combine depending on HActive and FMT Buffer limit.
Reject modes if TMDS 420 and above 4096.
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Chris Park <chris.park@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch updates the PTE flags when translate further (TF) is
enabled:
- With translate_further enabled, invalid PTEs can be 0. Reading
consecutive invalid PTEs as 0 is considered a fault. To prevent
this, ensure invalid PTEs have at least 1 bit set.
- The current invalid PTE flags settings to translate a retry fault
into a no-retry fault, doesn't work with TF enabled. As a result,
update invalid PTE flags settings which works for both TF enabled
and disabled case.
Fixes: 352e683b72 ("drm/amdgpu: Enable translate_further to extend UTCL2 reach")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It is not necessary to go through the process of validation, linking of
queues to mdev and vice versa and filtering the APQNs assigned to the
matrix mdev to build an AP configuration for a guest if an adapter or
domain being assigned is already assigned to the matrix mdev. Likewise, it
is not necessary to proceed through the process the unassignment of an
adapter, domain or control domain if it is not assigned to the matrix mdev.
Since it is not necessary to process assignment of a resource already
assigned or process unassignment of a resource that is been assigned,
this patch will bypass all assignment/unassignment operations for an
adapter, domain or control domain under these circumstances.
Not only is assignment of a duplicate adapter or domain unnecessary, it
will also cause a hang situation when removing the matrix mdev to which it is
assigned. The reason is because the same vfio_ap_queue objects with an
APQN containing the APID of the adapter or APQI of the domain being
assigned will get added multiple times to the hashtable that holds them.
This results in the pprev and next pointers of the hlist_node (mdev_qnode
field in the vfio_ap_queue object) pointing to the queue object itself
resulting in an interminable loop when the mdev is removed and the queue
table is iterated to reset the queues.
Cc: stable@vger.kernel.org
Fixes: 11cb2419fa ("s390/vfio-ap: manage link between queue struct and matrix mdev")
Reported-by: Matthew Rosato <mjrosato@linux.ibm.com>
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Reviewed-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
A couple years back we went through the kernel an automatically
converted size calculations to use struct_size() instead. The
struct_size() calculation is protected against integer overflows.
However it does not make sense to use the result from struct_size()
for additional math operations as that would negate any safeness.
Fixes: 1f3b69b6b9 ("i2c: mux: Use struct_size() in devm_kzalloc()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The i2c-mlxbf.c driver is currently broken because there is a bug
in the calculation of the frequency. core_f, core_r and core_od
are components read from hardware registers and are used to
compute the frequency used to compute different timing parameters.
The shifting mechanism used to get core_f, core_r and core_od is
wrong. Use FIELD_GET to mask and shift the bitfields properly.
Fixes: b5b5b32081 (i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC)
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
To pick the changes from:
7df548840c ("x86/bugs: Add "unknown" reporting for MMIO Stale Data")
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Link: https://lore.kernel.org/lkml/YysTRji90sNn2p5f@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
/proc/kallsyms and /proc/modules are compared before and after the copy
in order to ensure no changes during the copy.
However /proc/modules also might change due to reference counts changing
even though that does not make any difference.
Any modules loaded or unloaded should be visible in changes to kallsyms,
so it is not necessary to check /proc/modules also anyway.
Remove the comparison checking that /proc/modules is unchanged.
Fixes: fc1b691d76 ("perf buildid-cache: Add ability to add kcore to the cache")
Reported-by: Daniel Dao <dqminh@cloudflare.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Daniel Dao <dqminh@cloudflare.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220914122429.8770-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With mixed per-thread and (system-wide) per-cpu maps, the "any cpu" value
-1 must be skipped when setting CPU mask bits.
Prior to commit cbd7bfc7fd ("tools/perf: Fix out of bound access
to cpu mask array") the invalid setting went unnoticed, but since then
it causes perf record to fail with an error.
Example:
Before:
$ perf record -e intel_pt// --per-thread uname
Failed to initialize parallel data streaming masks
After:
$ perf record -e intel_pt// --per-thread uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.068 MB perf.data ]
Fixes: ae4f8ae16a ("libperf evlist: Allow mixing per-thread and per-cpu mmaps")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220915122612.81738-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull UML fixes from Richard Weinberger:
- Various fixes for build warnings
- Fix default kernel command line
* tag 'for-linus-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux:
arch: um: Mark the stack non-executable to fix a binutils warning
um: Prevent KASAN splats in dump_stack()
um: fix default console kernel parameter
um: Cleanup compiler warning in arch/x86/um/tls_32.c
um: Cleanup syscall_handler_t cast in syscalls_32.h
Pull MIPS fixes from Thomas Bogendoerfer:
- fix missing export for Lantiq watchdog driver
- fix ethernet phy interface setup for Loongson32
* tag 'mips-fixes_6.0_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: Loongson32: Fix PHY-mode being left unspecified
MIPS: lantiq: export clk_get_io() for lantiq_wdt.ko
Pull dmaengine fixes from Vinod Koul:
"A couple of small driver fixes:
- xilinx_dma: devm_platform_ioremap_resource error handling,
dma_set_mask_and_coherent failure handling, dt property read
cleanup
- refcount leak fix for of_xudma_dev_get()
- zynqmp_dma: coverity fix for enum typecast"
* tag 'dmaengine-fix-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: zynqmp_dma: Typecast with enum to fix the coverity warning
dmaengine: ti: k3-udma-private: Fix refcount leak bug in of_xudma_dev_get()
dmaengine: xilinx_dma: Report error in case of dma_set_mask_and_coherent API failure
dmaengine: xilinx_dma: cleanup for fetching xlnx,num-fstores property
dmaengine: xilinx_dma: Fix devm_platform_ioremap_resource error handling
Pull iommu fixes from Joerg Roedel:
"Two fixes for Intel VT-d:
- Check the right capability bit for 5-level page table support.
- Revert a previous fix which caused a regression with Thunderbolt
devices"
* tag 'iommu-fixes-v6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/vt-d: Check correct capability for sagaw determination
Revert "iommu/vt-d: Fix possible recursive locking in intel_iommu_init()"
Pull sound fixes from Takashi Iwai:
"A bit more changes than wished, but still manageable amount.
Most of commits are HD-audio specific device fixes / quirks, while
there is a revert for the previous fix due to regressions and a
double-free fix in ALSA core code"
* tag 'sound-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
Revert "ALSA: usb-audio: Split endpoint setups for hw_params and prepare"
ALSA: core: Fix double-free at snd_card_new()
ALSA: hda/realtek: Add a quirk for HP OMEN 16 (8902) mute LED
ALSA: hda/hdmi: Fix the converter reuse for the silent stream
ALSA: hda/realtek: Add quirk for ASUS GA503R laptop
ALSA: hda/realtek: Add pincfg for ASUS G533Z HP jack
ALSA: hda/realtek: Add pincfg for ASUS G513 HP jack
ALSA: hda/realtek: Re-arrange quirk table entries
ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5530 laptop
ALSA: hda/realtek: Enable 4-speaker output Dell Precision 5570 laptop
ALSA: hda: Fix Nvidia dp infoframe
ALSA: hda/realtek: Add quirk for Huawei WRT-WX9
ALSA: hda/tegra: set depop delay for tegra
ALSA: hda: add Intel 5 Series / 3400 PCI DID
ALSA: hda: Fix hang at HD-audio codec unbinding due to refcount saturation
Pull exfat fix from Namjae Jeon:
- fix integer overflow on large partitions
* tag 'exfat-for-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: fix overflow for large capacity partition
This silences smatch warnings reported by kbuild bot:
arch/s390/kvm/gaccess.c:859 guest_range_to_gpas() error: uninitialized symbol 'prot'.
arch/s390/kvm/gaccess.c:1064 access_guest_with_key() error: uninitialized symbol 'prot'.
This is because it cannot tell that the value is not used in this case.
The trans_exc* only examine prot if code is PGM_PROTECTION.
Pass a dummy value for other codes.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20220825192540.1560559-1-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Marc Kleine-Budde says:
====================
pull-request: can 2022-09-21
The 1st patch is by me, targets the flexcan driver and fixes a
potential system hang on single core systems under high CAN packet
rate.
The next 2 patches are also by me and target the gs_usb driver. A
potential race condition during the ndo_open callback as well as the
return value if the ethtool identify feature is not supported are
fixed.
* tag 'linux-can-fixes-for-6.0-20220921' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: gs_usb: gs_usb_set_phys_id(): return with error if identify is not supported
can: gs_usb: gs_can_open(): fix race dev->can.state condition
can: flexcan: flexcan_mailbox_read() fix return value for drop = true
====================
Link: https://lore.kernel.org/r/20220921083609.419768-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It seems the recent libbpf got more strict about the section name.
I'm seeing a failure like this:
$ sudo ./perf stat -a --bpf-counters --for-each-cgroup ^. sleep 1
libbpf: prog 'on_cgrp_switch': missing BPF prog type, check ELF section name 'perf_events'
libbpf: prog 'on_cgrp_switch': failed to load: -22
libbpf: failed to load object 'bperf_cgroup_bpf'
libbpf: failed to load BPF skeleton 'bperf_cgroup_bpf': -22
Failed to load cgroup skeleton
The section name should be 'perf_event' (without the trailing 's').
Although it's related to the libbpf change, it'd be better fix the
section name in the first place.
Fixes: 944138f048 ("perf stat: Enable BPF counter with --for-each-cgroup")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: bpf@vger.kernel.org
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/r/20220916184132.1161506-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Xu writes:
FPGA Manager changes for 6.0-final
Intel m10 bmc secure update
- Russ's change fixes the memory leak for a sysfs node reading
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-6.0 branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-6.0-final' of git://git.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: m10bmc-sec: Fix possible memory leak of flash_buf
This loop intends to retry a max of 10 times, with some implicit
termination based on the SD_{R,}OCR_S18A bit. Unfortunately, the
termination condition depends on the value reported by the SD card
(*rocr), which may or may not correctly reflect what we asked it to do.
Needless to say, it's not wise to rely on the card doing what we expect;
we should at least terminate the loop regardless. So, check both the
input and output values, so we ensure we will terminate regardless of
the SD card behavior.
Note that SDIO learned a similar retry loop in commit 0797e5f145
("mmc: core: Fixup signal voltage switch"), but that used the 'ocr'
result, and so the current pre-terminating condition looks like:
rocr & ocr & R4_18V_PRESENT
(i.e., it doesn't have the same bug.)
This addresses a number of crash reports seen on ChromeOS that look
like the following:
... // lots of repeated: ...
<4>[13142.846061] mmc1: Skipping voltage switch
<4>[13143.406087] mmc1: Skipping voltage switch
<4>[13143.964724] mmc1: Skipping voltage switch
<4>[13144.526089] mmc1: Skipping voltage switch
<4>[13145.086088] mmc1: Skipping voltage switch
<4>[13145.645941] mmc1: Skipping voltage switch
<3>[13146.153969] INFO: task halt:30352 blocked for more than 122 seconds.
...
Fixes: f2119df6b7 ("mmc: sd: add support for signal voltage switch procedure")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220914014010.2076169-1-briannorris@chromium.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
If aq_nic_stop() fails, aq_ndev_close() returns err without calling
aq_nic_deinit() to release the relevant memory and resource, which
will lead to a memory leak.
We can fix it by deleting the if condition judgment and goto statement to
call aq_nic_deinit() directly after aq_nic_stop() to fix the memory leak.
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Florian Westphal says:
====================
netfilter: bugfixes for net
The following set contains netfilter fixes for the *net* tree.
Regressions (rc only):
recent ebtables crash fix was incomplete, it added a memory leak.
The patch to fix possible buffer overrun for BIG TCP in ftp conntrack
tried to be too clever, we cannot re-use ct->lock: NAT engine might
grab it again -> deadlock. Revert back to a global spinlock.
Both from myself.
Remove the documentation for the recently removed
'nf_conntrack_helper' sysctl as well, from Pablo Neira.
The static_branch_inc() that guards the 'chain stats enabled' path
needs to be deferred further, until the entire transaction was created.
From Tetsuo Handa.
Older bugs:
Since 5.3:
nf_tables_addchain may leak pcpu memory in error path when
offloading fails. Also from Tetsuo Handa.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Until commit 409c188c57 ("can: tree-wide: advertise software
timestamping capabilities") the ethtool_ops was only assigned for
devices which support the GS_CAN_FEATURE_IDENTIFY feature. That commit
assigns ethtool_ops unconditionally.
This results on controllers without GS_CAN_FEATURE_IDENTIFY support
for the following ethtool error:
| $ ethtool -p can0 1
| Cannot identify NIC: Broken pipe
Restore the correct error value by checking for
GS_CAN_FEATURE_IDENTIFY in the gs_usb_set_phys_id() function.
| $ ethtool -p can0 1
| Cannot identify NIC: Operation not supported
While there use the variable "netdev" for the "struct net_device"
pointer and "dev" for the "struct gs_can" pointer as in the rest of
the driver.
Fixes: 409c188c57 ("can: tree-wide: advertise software timestamping capabilities")
Link: http://lore.kernel.org/all/20220818143853.2671854-1-mkl@pengutronix.de
Cc: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The dev->can.state is set to CAN_STATE_ERROR_ACTIVE, after the device
has been started. On busy networks the CAN controller might receive
CAN frame between and go into an error state before the dev->can.state
is assigned.
Assign dev->can.state before starting the controller to close the race
window.
Fixes: d08e973a77 ("can: gs_usb: Added support for the GS_USB CAN devices")
Link: https://lore.kernel.org/all/20220920195216.232481-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The following happened on an i.MX25 using flexcan with many packets on
the bus:
The rx-offload queue reached a length more than skb_queue_len_max. In
can_rx_offload_offload_one() the drop variable was set to true which
made the call to .mailbox_read() (here: flexcan_mailbox_read()) to
_always_ return ERR_PTR(-ENOBUFS) and drop the rx'ed CAN frame. So
can_rx_offload_offload_one() returned ERR_PTR(-ENOBUFS), too.
can_rx_offload_irq_offload_fifo() looks as follows:
| while (1) {
| skb = can_rx_offload_offload_one(offload, 0);
| if (IS_ERR(skb))
| continue;
| if (!skb)
| break;
| ...
| }
The flexcan driver wrongly always returns ERR_PTR(-ENOBUFS) if drop is
requested, even if there is no CAN frame pending. As the i.MX25 is a
single core CPU, while the rx-offload processing is active, there is
no thread to process packets from the offload queue. So the queue
doesn't get any shorter and this results is a tight loop.
Instead of always returning ERR_PTR(-ENOBUFS) if drop is requested,
return NULL if no CAN frame is pending.
Changes since v1: https://lore.kernel.org/all/20220810144536.389237-1-u.kleine-koenig@pengutronix.de
- don't break in can_rx_offload_irq_offload_fifo() in case of an error,
return NULL in flexcan_mailbox_read() in case of no pending CAN frame
instead
Fixes: 4e9c9484b0 ("can: rx-offload: Prepare for CAN FD support")
Link: https://lore.kernel.org/all/20220811094254.1864367-1-mkl@pengutronix.de
Cc: stable@vger.kernel.org # v5.5
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Thorsten Scherer <t.scherer@eckelmann.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When running gpio test on nxp-ls1028 platform with below command
gpiomon --num-events=3 --rising-edge gpiochip1 25
There will be a warning trace as below:
Call trace:
free_irq+0x204/0x360
lineevent_free+0x64/0x70
gpio_ioctl+0x598/0x6a0
__arm64_sys_ioctl+0xb4/0x100
invoke_syscall+0x5c/0x130
......
el0t_64_sync+0x1a0/0x1a4
The reason of this issue is that calling request_threaded_irq()
function failed, and then lineevent_free() is invoked to release
the resource. Since the lineevent_state::irq was already set, so
the subsequent invocation of free_irq() would trigger the above
warning call trace. To fix this issue, set the lineevent_state::irq
after the IRQ register successfully.
Fixes: 4682427241 ("gpiolib: cdev: refactor lineevent cleanup into lineevent_free")
Cc: stable@vger.kernel.org
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The commit 924610607f ("gpio: tpmx86: Move PM device over to
irq domain") adds a dereference of girq that may be uninitialized.
Fix this by moving irq_domain_set_pm_device into if true branch
as suggested by Marc Zyngier.
Fixes: 924610607f ("gpio: tpmx86: Move PM device over to irq domain")
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Since binutils 2.39, ld will print a warning if any stack section is
executable, which is the default for stack sections on files without a
.note.GNU-stack section.
This was fixed for x86 in commit ffcf9c5700 ("x86: link vdso and boot with -z noexecstack --no-warn-rwx-segments"),
but remained broken for UML, resulting in several warnings:
/usr/bin/ld: warning: arch/x86/um/vdso/vdso.o: missing .note.GNU-stack section implies executable stack
/usr/bin/ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
/usr/bin/ld: warning: .tmp_vmlinux.kallsyms1 has a LOAD segment with RWX permissions
/usr/bin/ld: warning: .tmp_vmlinux.kallsyms1.o: missing .note.GNU-stack section implies executable stack
/usr/bin/ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
/usr/bin/ld: warning: .tmp_vmlinux.kallsyms2 has a LOAD segment with RWX permissions
/usr/bin/ld: warning: .tmp_vmlinux.kallsyms2.o: missing .note.GNU-stack section implies executable stack
/usr/bin/ld: NOTE: This behaviour is deprecated and will be removed in a future version of the linker
/usr/bin/ld: warning: vmlinux has a LOAD segment with RWX permissions
Link both the VDSO and vmlinux with -z noexecstack, fixing the warnings
about .note.GNU-stack sections. In addition, pass --no-warn-rwx-segments
to dodge the remaining warnings about LOAD segments with RWX permissions
in the kallsyms objects. (Note that this flag is apparently not
available on lld, so hide it behind a test for BFD, which is what the
x86 patch does.)
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=ffcf9c5700e49c0aee42dcba9a12ba21338e8136
Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=ba951afb99912da01a6e8434126b8fac7aa75107
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Lukas Straub <lukasstraub2@web.de>
Tested-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Richard Weinberger <richard@nod.at>
Since commit 744d23c71a ("net: phy: Warn about incorrect
mdio_bus_phy_resume() state"), a warning splat is printed during system
resume with Wake-on-LAN disabled:
WARNING: CPU: 0 PID: 626 at drivers/net/phy/phy_device.c:323 mdio_bus_phy_resume+0xbc/0xe4
As the Renesas SuperH Ethernet driver already calls phy_{stop,start}()
in its suspend/resume callbacks, it is sufficient to just mark the MAC
responsible for managing the power state of the PHY.
Fixes: fba863b816 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/c6e1331b9bef61225fa4c09db3ba3e2e7214ba2d.1663598886.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 744d23c71a ("net: phy: Warn about incorrect
mdio_bus_phy_resume() state"), a warning splat is printed during system
resume with Wake-on-LAN disabled:
WARNING: CPU: 0 PID: 1197 at drivers/net/phy/phy_device.c:323 mdio_bus_phy_resume+0xbc/0xc8
As the Renesas Ethernet AVB driver already calls phy_{stop,start}() in
its suspend/resume callbacks, it is sufficient to just mark the MAC
responsible for managing the power state of the PHY.
Fixes: fba863b816 ("net: phy: make PHY PM ops a no-op if MAC driver manages PHY PM")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/8ec796f47620980fdd0403e21bd8b7200b4fa1d4.1663598796.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We can't use ct->lock, this is already used by the seqadj internals.
When using ftp helper + nat, seqadj will attempt to acquire ct->lock
again.
Revert back to a global lock for now.
Fixes: c783a29c7e ("netfilter: nf_ct_ftp: prefer skb_linearize")
Reported-by: Bruno de Paula Larini <bruno.larini@riosoft.com.br>
Signed-off-by: Florian Westphal <fw@strlen.de>
The bug fix was incomplete, it "replaced" crash with a memory leak.
The old code had an assignment to "ret" embedded into the conditional,
restore this.
Fixes: 7997eff828 ("netfilter: ebtables: reject blobs that don't provide all entry points")
Reported-and-tested-by: syzbot+a24c5252f3e3ab733464@syzkaller.appspotmail.com
Signed-off-by: Florian Westphal <fw@strlen.de>
It seems to me that percpu memory for chain stats started leaking since
commit 3bc158f8d0 ("netfilter: nf_tables: map basechain priority to
hardware priority") when nft_chain_offload_priority() returned an error.
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 3bc158f8d0 ("netfilter: nf_tables: map basechain priority to hardware priority")
Signed-off-by: Florian Westphal <fw@strlen.de>
This toggle has been already remove by b118509076 ("netfilter: remove
nf_conntrack_helper sysctl and modparam toggles").
Remove the documentation entry for this toggle too.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
When performing a reset on ice driver with link-down-on-close flag on
interface would always stay down. Fix this by moving a check of this
flag to ice_stop() that is called only when user wants to bring
interface down.
Fixes: ab4ab73fc1 ("ice: Add ethtool private flag to make forcing link down optional")
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Petr Oros <poros@redhat.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
After lowering number of tx queues the warning appears:
"Number of in use tx queues changed invalidating tc mappings. Priority
traffic classification disabled!"
Example command to reproduce:
ethtool -L enp24s0f0 tx 36 rx 36
Fix this by setting correct tc mapping before setting real number of
queues on netdev.
Fixes: 0754d65bd4 ("ice: Add infrastructure for mqprio support via ndo_setup_tc")
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Vladimir Oltean says:
====================
Fixes for tc-taprio software mode
While working on some new features for tc-taprio, I found some strange
behavior which looked like bugs. I was able to eventually trigger a NULL
pointer dereference. This patch set fixes 2 issues I saw. Detailed
explanation in patches.
====================
Link: https://lore.kernel.org/r/20220915100802.2308279-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
taprio can only operate as root qdisc, and to that end, there exists the
following check in taprio_init(), just as in mqprio:
if (sch->parent != TC_H_ROOT)
return -EOPNOTSUPP;
And indeed, when we try to attach taprio to an mqprio child, it fails as
expected:
$ tc qdisc add dev swp0 root handle 1: mqprio num_tc 8 \
map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0
$ tc qdisc replace dev swp0 parent 1:2 taprio num_tc 8 \
map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
base-time 0 sched-entry S 0x7f 990000 sched-entry S 0x80 100000 \
flags 0x0 clockid CLOCK_TAI
Error: sch_taprio: Can only be attached as root qdisc.
(extack message added by me)
But when we try to attach a taprio child to a taprio root qdisc,
surprisingly it doesn't fail:
$ tc qdisc replace dev swp0 root handle 1: taprio num_tc 8 \
map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
base-time 0 sched-entry S 0x7f 990000 sched-entry S 0x80 100000 \
flags 0x0 clockid CLOCK_TAI
$ tc qdisc replace dev swp0 parent 1:2 taprio num_tc 8 \
map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \
base-time 0 sched-entry S 0x7f 990000 sched-entry S 0x80 100000 \
flags 0x0 clockid CLOCK_TAI
This is because tc_modify_qdisc() behaves differently when mqprio is
root, vs when taprio is root.
In the mqprio case, it finds the parent qdisc through
p = qdisc_lookup(dev, TC_H_MAJ(clid)), and then the child qdisc through
q = qdisc_leaf(p, clid). This leaf qdisc q has handle 0, so it is
ignored according to the comment right below ("It may be default qdisc,
ignore it"). As a result, tc_modify_qdisc() goes through the
qdisc_create() code path, and this gives taprio_init() a chance to check
for sch_parent != TC_H_ROOT and error out.
Whereas in the taprio case, the returned q = qdisc_leaf(p, clid) is
different. It is not the default qdisc created for each netdev queue
(both taprio and mqprio call qdisc_create_dflt() and keep them in
a private q->qdiscs[], or priv->qdiscs[], respectively). Instead, taprio
makes qdisc_leaf() return the _root_ qdisc, aka itself.
When taprio does that, tc_modify_qdisc() goes through the qdisc_change()
code path, because the qdisc layer never finds out about the child qdisc
of the root. And through the ->change() ops, taprio has no reason to
check whether its parent is root or not, just through ->init(), which is
not called.
The problem is the taprio_leaf() implementation. Even though code wise,
it does the exact same thing as mqprio_leaf() which it is copied from,
it works with different input data. This is because mqprio does not
attach itself (the root) to each device TX queue, but one of the default
qdiscs from its private array.
In fact, since commit 13511704f8 ("net: taprio offload: enforce qdisc
to netdev queue mapping"), taprio does this too, but just for the full
offload case. So if we tried to attach a taprio child to a fully
offloaded taprio root qdisc, it would properly fail too; just not to a
software root taprio.
To fix the problem, stop looking at the Qdisc that's attached to the TX
queue, and instead, always return the default qdiscs that we've
allocated (and to which we privately enqueue and dequeue, in software
scheduling mode).
Since Qdisc_class_ops :: leaf is only called from tc_modify_qdisc(),
the risk of unforeseen side effects introduced by this change is
minimal.
Fixes: 5a781ccbd1 ("tc: Add support for configuring the taprio scheduler")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In an incredibly strange API design decision, qdisc->destroy() gets
called even if qdisc->init() never succeeded, not exclusively since
commit 87b60cfacf ("net_sched: fix error recovery at qdisc creation"),
but apparently also earlier (in the case of qdisc_create_dflt()).
The taprio qdisc does not fully acknowledge this when it attempts full
offload, because it starts off with q->flags = TAPRIO_FLAGS_INVALID in
taprio_init(), then it replaces q->flags with TCA_TAPRIO_ATTR_FLAGS
parsed from netlink (in taprio_change(), tail called from taprio_init()).
But in taprio_destroy(), we call taprio_disable_offload(), and this
determines what to do based on FULL_OFFLOAD_IS_ENABLED(q->flags).
But looking at the implementation of FULL_OFFLOAD_IS_ENABLED()
(a bitwise check of bit 1 in q->flags), it is invalid to call this macro
on q->flags when it contains TAPRIO_FLAGS_INVALID, because that is set
to U32_MAX, and therefore FULL_OFFLOAD_IS_ENABLED() will return true on
an invalid set of flags.
As a result, it is possible to crash the kernel if user space forces an
error between setting q->flags = TAPRIO_FLAGS_INVALID, and the calling
of taprio_enable_offload(). This is because drivers do not expect the
offload to be disabled when it was never enabled.
The error that we force here is to attach taprio as a non-root qdisc,
but instead as child of an mqprio root qdisc:
$ tc qdisc add dev swp0 root handle 1: \
mqprio num_tc 8 map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0
$ tc qdisc replace dev swp0 parent 1:1 \
taprio num_tc 8 map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 base-time 0 \
sched-entry S 0x7f 990000 sched-entry S 0x80 100000 \
flags 0x0 clockid CLOCK_TAI
Unable to handle kernel paging request at virtual address fffffffffffffff8
[fffffffffffffff8] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 96000004 [#1] PREEMPT SMP
Call trace:
taprio_dump+0x27c/0x310
vsc9959_port_setup_tc+0x1f4/0x460
felix_port_setup_tc+0x24/0x3c
dsa_slave_setup_tc+0x54/0x27c
taprio_disable_offload.isra.0+0x58/0xe0
taprio_destroy+0x80/0x104
qdisc_create+0x240/0x470
tc_modify_qdisc+0x1fc/0x6b0
rtnetlink_rcv_msg+0x12c/0x390
netlink_rcv_skb+0x5c/0x130
rtnetlink_rcv+0x1c/0x2c
Fix this by keeping track of the operations we made, and undo the
offload only if we actually did it.
I've added "bool offloaded" inside a 4 byte hole between "int clockid"
and "atomic64_t picos_per_byte". Now the first cache line looks like
below:
$ pahole -C taprio_sched net/sched/sch_taprio.o
struct taprio_sched {
struct Qdisc * * qdiscs; /* 0 8 */
struct Qdisc * root; /* 8 8 */
u32 flags; /* 16 4 */
enum tk_offsets tk_offset; /* 20 4 */
int clockid; /* 24 4 */
bool offloaded; /* 28 1 */
/* XXX 3 bytes hole, try to pack */
atomic64_t picos_per_byte; /* 32 0 */
/* XXX 8 bytes hole, try to pack */
spinlock_t current_entry_lock; /* 40 0 */
/* XXX 8 bytes hole, try to pack */
struct sched_entry * current_entry; /* 48 8 */
struct sched_gate_list * oper_sched; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
Fixes: 9c66d15646 ("taprio: Add support for hardware offloading")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The global 'raw_v6_hashinfo' variable can be accessed even when IPv6 is
administratively disabled via the 'ipv6.disable=1' kernel command line
option, leading to a crash [1].
Fix by restoring the original behavior and always initializing the
variable, regardless of IPv6 support being administratively disabled or
not.
[1]
BUG: unable to handle page fault for address: ffffffffffffffc8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 173e18067 P4D 173e18067 PUD 173e1a067 PMD 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 3 PID: 271 Comm: ss Not tainted 6.0.0-rc4-custom-00136-g0727a9a5fbc1 #1396
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
RIP: 0010:raw_diag_dump+0x310/0x7f0
[...]
Call Trace:
<TASK>
__inet_diag_dump+0x10f/0x2e0
netlink_dump+0x575/0xfd0
__netlink_dump_start+0x67b/0x940
inet_diag_handler_cmd+0x273/0x2d0
sock_diag_rcv_msg+0x317/0x440
netlink_rcv_skb+0x15e/0x430
sock_diag_rcv+0x2b/0x40
netlink_unicast+0x53b/0x800
netlink_sendmsg+0x945/0xe60
____sys_sendmsg+0x747/0x960
___sys_sendmsg+0x13a/0x1e0
__sys_sendmsg+0x118/0x1e0
do_syscall_64+0x34/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Fixes: 0daf07e527 ("raw: convert raw sockets to RCU")
Reported-by: Roberto Ricci <rroberto2r@gmail.com>
Tested-by: Roberto Ricci <rroberto2r@gmail.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220916084821.229287-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TSN features on the ENETC (taprio, cbs, gate, police) are configured
through a mix of command BD ring messages and port registers:
enetc_port_rd(), enetc_port_wr().
Port registers are a region of the ENETC memory map which are only
accessible from the PCIe Physical Function. They are not accessible from
the Virtual Functions.
Moreover, attempting to access these registers crashes the kernel:
$ echo 1 > /sys/bus/pci/devices/0000\:00\:00.0/sriov_numvfs
pci 0000:00:01.0: [1957:ef00] type 00 class 0x020001
fsl_enetc_vf 0000:00:01.0: Adding to iommu group 15
fsl_enetc_vf 0000:00:01.0: enabling device (0000 -> 0002)
fsl_enetc_vf 0000:00:01.0 eno0vf0: renamed from eth0
$ tc qdisc replace dev eno0vf0 root taprio num_tc 8 map 0 1 2 3 4 5 6 7 \
queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 base-time 0 \
sched-entry S 0x7f 900000 sched-entry S 0x80 100000 flags 0x2
Unable to handle kernel paging request at virtual address ffff800009551a08
Internal error: Oops: 96000007 [#1] PREEMPT SMP
pc : enetc_setup_tc_taprio+0x170/0x47c
lr : enetc_setup_tc_taprio+0x16c/0x47c
Call trace:
enetc_setup_tc_taprio+0x170/0x47c
enetc_setup_tc+0x38/0x2dc
taprio_change+0x43c/0x970
taprio_init+0x188/0x1e0
qdisc_create+0x114/0x470
tc_modify_qdisc+0x1fc/0x6c0
rtnetlink_rcv_msg+0x12c/0x390
Split enetc_setup_tc() into separate functions for the PF and for the
VF drivers. Also remove enetc_qos.o from being included into
enetc-vf.ko, since it serves absolutely no purpose there.
Fixes: 34c6adf197 ("enetc: Configure the Time-Aware Scheduler via tc-taprio offload")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220916133209.3351399-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jason A. Donenfeld says:
====================
wireguard patches for 6.0-rc6
1) The ratelimiter timing test doesn't help outside of development, yet
it is currently preventing the module from being inserted on some
kernels when it flakes at insertion time. So we disable it.
2) A fix for a build error on UML, caused by a recent change in a
different tree.
3) A WARN_ON() is triggered by Kees' new fortified memcpy() patch, due
to memcpy()ing over a sockaddr pointer with the size of a
sockaddr_in[6]. The type safe fix is pretty simple. Given how classic
of a thing sockaddr punning is, I suspect this may be the first in a
few patches like this throughout the net tree, once Kees' fortify
series is more widely deployed (current it's just in next).
====================
Link: https://lore.kernel.org/r/20220916143740.831881-1-Jason@zx2c4.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Doing a variable-sized memcpy is slower, and the compiler isn't smart
enough to turn this into a constant-size assignment.
Further, Kees' latest fortified memcpy will actually bark, because the
destination pointer is type sockaddr, not explicitly sockaddr_in or
sockaddr_in6, so it thinks there's an overflow:
memcpy: detected field-spanning write (size 28) of single field
"&endpoint.addr" at drivers/net/wireguard/netlink.c:446 (size 16)
Fix this by just assigning by using explicit casts for each checked
case.
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reported-by: syzbot+a448cda4dba2dac50de5@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since 1b620d539c ("kbuild: disable header exports for UML in a
straightforward way"), installing headers fails on UML, so just disable
installing them, since they're not needed anyway on the architecture.
Fixes: b438b3b8d6 ("wireguard: selftests: support UML")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A previous commit tried to make the ratelimiter timings test more
reliable but in the process made it less reliable on other
configurations. This is an impossible problem to solve without
increasingly ridiculous heuristics. And it's not even a problem that
actually needs to be solved in any comprehensive way, since this is only
ever used during development. So just cordon this off with a DEBUG_
ifdef, just like we do for the trie's randomized tests, so it can be
enabled while hacking on the code, and otherwise disabled in CI. In the
process we also revert 151c8e499f.
Fixes: 151c8e499f ("wireguard: ratelimiter: use hrtimer in selftest")
Fixes: e7096c131e ("net: WireGuard secure network tunnel")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull btrfs fixes from David Sterba:
- two fixes for hangs in the umount sequence where threads depend on
each other and the work must be finished in the right order
- in zoned mode, wait for flushing all block group metadata IO before
finishing the zone
* tag 'for-6.0-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: wait for extent buffer IOs before finishing a zone
btrfs: fix hang during unmount when stopping a space reclaim worker
btrfs: fix hang during unmount when stopping block group reclaim worker
Pull vfs fix from Christian Brauner:
"Beginning of the merge window we introduced the vfs{g,u}id_t types in
b27c82e129 ("attr: port attribute changes to new types") and changed
various codepaths over including chown_common().
When userspace passes -1 for an ownership change the ownership fields
in struct iattr stay uninitialized. Usually this is fine because any
code making use of any fields in struct iattr must check the
->ia_valid field whether the value of interest has been initialized.
That's true for all struct iattr passing code.
However, over the course of the last year with more heavy use of KMSAN
we found quite a few places that got this wrong. A recent one I fixed
was 3cb6ee9914 ("9p: only copy valid iattrs in 9P2000.L setattr
implementation").
But we also have LSM hooks. Actually we have two. The first one is
security_inode_setattr() in notify_change() which does the right thing
and passes the full struct iattr down to LSMs and thus LSMs can check
whether it is initialized.
But then we also have security_path_chown() which passes down a path
argument and the target ownership as the filesystem would see it. For
the latter we now generate the target values based on struct iattr and
pass it down. However, when userspace passes -1 then struct iattr
isn't initialized.
This patch simply initializes ->ia_vfs{g,u}id with INVALID_VFS{G,U}ID
so the hook continue to see invalid ownership when -1 is passed from
userspace. The only LSM that cares about the actual values is Tomoyo.
The vfs codepaths don't look at these fields without ->ia_valid being
set so there's no harm in initializing ->ia_vfs{g,u}id. Arguably this
is also safer since we can't end up copying valid ownership values
when invalid ownership values should be passed.
This only affects mainline. No kernel has been released with this and
thus no backport is needed. The commit is thus marked with a Fixes:
tag but annotated with "# mainline only" (I didn't quite remember what
Greg said about how to tell stable autoselect to not bother with fixes
for mainline only)"
* tag 'fs.fixes.v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping:
open: always initialize ownership fields
There is a single kmalloc in this driver, and it's not currently
guarded against allocation failure. Do it here by just bailing-out
the reboot handler, in case this tentative allocation fails.
Fixes: 416581e486 ("efi: efibc: avoid efivar API for setting variables")
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Pull execve reverts from Kees Cook:
"The recent work to support time namespace unsharing turns out to have
some undesirable corner cases, so rather than allowing the API to stay
exposed for another release, it'd be best to remove it ASAP, with the
replacement getting another cycle of testing. Nothing is known to use
this yet, so no userspace breakage is expected.
For more details, see:
https://lore.kernel.org/lkml/ed418e43ad28b8688cfea2b7c90fce1c@ispras.ru
Summary:
- Remove the recent 'unshare time namespace on vfork+exec' feature
(Andrei Vagin)"
* tag 'execve-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
Revert "fs/exec: allow to unshare a time namespace on vfork+exec"
Revert "selftests/timens: add a test for vfork+exit"
Add IPv4 and IPv6 test cases for unresolved multicast routes, testing
that queued packets are forwarded after installing a matching (S, G)
route.
The test cases can be used to reproduce the bugs fixed in "ipmr: Always
call ip{,6}_mr_forward() from RCU read-side critical section".
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These functions expect to be called from RCU read-side critical section,
but this only happens when invoked from the data path via
ip{,6}_mr_input(). They can also be invoked from process context in
response to user space adding a multicast route which resolves a cache
entry with queued packets [1][2].
Fix by adding missing rcu_read_lock() / rcu_read_unlock() in these call
paths.
[1]
WARNING: suspicious RCU usage
6.0.0-rc3-custom-15969-g049d233c8bcc-dirty #1387 Not tainted
-----------------------------
net/ipv4/ipmr.c:84 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by smcrouted/246:
#0: ffffffff862389b0 (rtnl_mutex){+.+.}-{3:3}, at: ip_mroute_setsockopt+0x11c/0x1420
stack backtrace:
CPU: 0 PID: 246 Comm: smcrouted Not tainted 6.0.0-rc3-custom-15969-g049d233c8bcc-dirty #1387
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x91/0xb9
vif_dev_read+0xbf/0xd0
ipmr_queue_xmit+0x135/0x1ab0
ip_mr_forward+0xe7b/0x13d0
ipmr_mfc_add+0x1a06/0x2ad0
ip_mroute_setsockopt+0x5c1/0x1420
do_ip_setsockopt+0x23d/0x37f0
ip_setsockopt+0x56/0x80
raw_setsockopt+0x219/0x290
__sys_setsockopt+0x236/0x4d0
__x64_sys_setsockopt+0xbe/0x160
do_syscall_64+0x34/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
[2]
WARNING: suspicious RCU usage
6.0.0-rc3-custom-15969-g049d233c8bcc-dirty #1387 Not tainted
-----------------------------
net/ipv6/ip6mr.c:69 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by smcrouted/246:
#0: ffffffff862389b0 (rtnl_mutex){+.+.}-{3:3}, at: ip6_mroute_setsockopt+0x6b9/0x2630
stack backtrace:
CPU: 1 PID: 246 Comm: smcrouted Not tainted 6.0.0-rc3-custom-15969-g049d233c8bcc-dirty #1387
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x91/0xb9
vif_dev_read+0xbf/0xd0
ip6mr_forward2.isra.0+0xc9/0x1160
ip6_mr_forward+0xef0/0x13f0
ip6mr_mfc_add+0x1ff2/0x31f0
ip6_mroute_setsockopt+0x1825/0x2630
do_ipv6_setsockopt+0x462/0x4440
ipv6_setsockopt+0x105/0x140
rawv6_setsockopt+0xd8/0x690
__sys_setsockopt+0x236/0x4d0
__x64_sys_setsockopt+0xbe/0x160
do_syscall_64+0x34/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: ebc3197963 ("ipmr: add rcu protection over (struct vif_device)->dev")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IPA can route packets between IPA-connected entities. The AP and
modem are currently the only such entities supported, and no routing
is required to transfer packets between them.
The number of entries in each routing table is fixed, and defined at
initialization time. Some of these entries are designated for use
by the modem, and the rest are available for the AP to use. The AP
sends a QMI message to the modem which describes (among other
things) information about routing table memory available for the
modem to use.
Currently the QMI initialization packet gives wrong information in
its description of routing tables. What *should* be supplied is the
maximum index that the modem can use for the routing table memory
located at a given location. The current code instead supplies the
total *number* of routing table entries. Furthermore, the modem is
granted the entire table, not just the subset it's supposed to use.
This patch fixes this. First, the ipa_mem_bounds structure is
generalized so its "end" field can be interpreted either as a final
byte offset, or a final array index. Second, the IPv4 and IPv6
(non-hashed and hashed) table information fields in the QMI
ipa_init_modem_driver_req structure are changed to be ipa_mem_bounds
rather than ipa_mem_array structures. Third, we set the "end" value
for each routing table to be the last index, rather than setting the
"count" to be the number of indices. Finally, instead of allowing
the modem to use all of a routing table's memory, it is limited to
just the portion meant to be used by the modem. In all versions of
IPA currently supported, that is IPA_ROUTE_MODEM_COUNT (8) entries.
Update a few comments for clarity.
Fixes: 530f9216a9 ("soc: qcom: ipa: AP/modem communications")
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20220913204602.1803004-1-elder@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Due to i915_perf assuming that it can use the i915_gem_context reference
to protect its i915->gem.contexts.list iteration, we need to defer removal
of the context from the list until last reference to the context is put.
However, there is a risk of triggering kernel warning on contexts list not
empty at driver release time if we deleagate that task to a worker for
i915_gem_context_release_work(), unless that work is flushed first.
Unfortunately, it is not flushed on driver release. Fix it.
Instead of additionally calling flush_workqueue(), either directly or via
a new dedicated wrapper around it, replace last call to
i915_gem_drain_freed_objects() with existing i915_gem_drain_workqueue()
that performs both tasks.
Fixes: 75eefd8258 ("drm/i915: Release i915_gem_context from a worker")
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: stable@kernel.org # v5.16+
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220916092403.201355-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 1cec344424)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This reverts commit a09b314005.
Dusty Mabe reported consistent hang during CoreOS shutdown with a MD
RAID1 setup. Although apparently similar hangs happened before,
and this patch most likely is not the root cause it made it much
more severe. Revert it until we can figure out what is going on
with the md driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220919144049.978907-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If creation of software node fails, the locally allocated string
array is left unfreed. Free it on error path.
Fixes: 6fda593f30 ("gpio: mockup: Convert to use software nodes")
Cc: stable@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
We now remove the device's debugfs entries when unbinding the driver.
This now causes a NULL-pointer dereference on module exit because the
platform devices are unregistered *after* the global debugfs directory
has been recursively removed. Fix it by unregistering the devices first.
Fixes: 303e6da994 ("gpio: mockup: remove gpio debugfs when remove device")
Cc: Wei Yongjun <weiyongjun1@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Before we switched to ->read_skb(), ->read_sock() was passed with
desc.count=1, which technically indicates we only read one skb per
->sk_data_ready() call. However, for TCP, this is not true.
TCP at least has sk_rcvlowat which intentionally holds skb's in
receive queue until this watermark is reached. This means when
->sk_data_ready() is invoked there could be multiple skb's in the
queue, therefore we have to read multiple skbs in tcp_read_skb()
instead of one.
Fixes: 965b57b469 ("net: Introduce a new proto_ops ->read_skb()")
Reported-by: Peilin Ye <peilin.ye@bytedance.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jakub Sitnicki <jakub@cloudflare.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/r/20220912173553.235838-1-xiyou.wangcong@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Maximum frame length check is enabled in lan937x switch on POR, But it
is found to be disabled on driver during port setup operation. Due to
this, packets are not dropped when transmitted with greater than configured
value. For testing, setup made for lan1->lan2 transmission and configured
lan1 interface with a frame length (less than 1500 as mentioned in
documentation) and transmitted packets with greater than configured value.
Expected no packets at lan2 end, but packets observed at lan2.
Based on the documentation, packets should get discarded if the actual
packet length doesn't match the frame length configured. Frame length check
should be disabled only for cascaded ports due to tailtags.
This feature was disabled on ksz9477 series due to ptp issue, which is
not in lan937x series. But since lan937x took ksz9477 as base, frame
length check disabled here as well. Patch added to remove this portion
from port setup so that maximum frame length check will be active for
normal ports.
Fixes: 55ab6ffaf3 ("net: dsa: microchip: add DSA support for microchip LAN937x")
Signed-off-by: Rakesh Sankaranarayanan <rakesh.sankaranarayanan@microchip.com>
Link: https://lore.kernel.org/r/20220912051228.1306074-1-rakesh.sankaranarayanan@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Beginning of the merge window we introduced the vfs{g,u}id_t types in
b27c82e129 ("attr: port attribute changes to new types") and changed
various codepaths over including chown_common().
During that change we forgot to account for the case were the passed
ownership value is -1. In this case the ownership fields in struct iattr
aren't initialized but we rely on them being initialized by the time we
generate the ownership to pass down to the LSMs. All the major LSMs
don't care about the ownership values at all. Only Tomoyo uses them and
so it took a while for syzbot to unearth this issue.
Fix this by initializing the ownership fields and do it within the
retry_deleg block. While notify_change() doesn't alter the ownership
fields currently we shouldn't rely on it.
Since no kernel has been released with these changes this does not
needed to be backported to any stable kernels.
[Christian Brauner (Microsoft) <brauner@kernel.org>]
* rewrote commit message
* use INVALID_VFS{G,U}ID macros
Fixes: b27c82e129 ("attr: port attribute changes to new types") # mainline only
Reported-and-tested-by: syzbot+541e21dcc32c4046cba9@syzkaller.appspotmail.com
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Seth Forshee (DigitalOcean) <sforshee@kernel.org>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Use GFP_ATOMIC when allocating pages out of the hotpath,
continue to use GFP_KERNEL when allocating pages during setup.
GFP_KERNEL will allow blocking which allows it to succeed
more often in a low memory enviornment but in the hotpath we do
not want to allow the allocation to block.
Fixes: 9b8dd5e5ea ("gve: DQO: Add RX path")
Signed-off-by: Shailend Chand <shailend@google.com>
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Link: https://lore.kernel.org/r/20220913000901.959546-1-jeroendb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kalle Valo says:
====================
wireless fixes for v6.0
Late stage fixes for v6.0. Temporarily mark iwlwifi's mei code broken
as it breaks suspend for iwd users and also don't spam nss trimming
messages. mt76 has fixes for aggregation sequence numbers and a
regression related to the VHT extended NSS BW feature.
* tag 'wireless-2022-09-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mt76: fix 5 GHz connection regression on mt76x0/mt76x2
wifi: mt76: fix reading current per-tid starting sequence number for aggregation
wifi: iwlwifi: Mark IWLMEI as broken
wifi: iwlwifi: don't spam logs with NSS>2 messages
====================
Link: https://lore.kernel.org/r/20220919105003.1EAE7C433B5@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simon Wunderlich says:
====================
Here is a batman-adv bugfix:
- Fix hang up with small MTU hard-interface, by Shigeru Yoshida
* tag 'batadv-net-pullrequest-20220916' of git://git.open-mesh.org/linux-merge:
batman-adv: Fix hang up with small MTU hard-interface
====================
Link: https://lore.kernel.org/r/20220916160931.1412407-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Trying to get the channel from the tx_queue variable here is wrong
because we can only be here if tx_queue is NULL, so we shouldn't
dereference it. As the above comment in the code says, this is very
unlikely to happen, but it's wrong anyway so let's fix it.
I hit this issue because of a different bug that caused tx_queue to be
NULL. If that happens, this is the error message that we get here:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[...]
RIP: 0010:efx_hard_start_xmit+0x153/0x170 [sfc]
Fixes: 12804793b1 ("sfc: decouple TXQ type from label")
Reported-by: Tianhao Zhao <tizhao@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220914111135.21038-1-ihuguet@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In legacy interrupt mode the tx_channel_offset was hardcoded to 1, but
that's not correct if efx_sepparate_tx_channels is false. In that case,
the offset is 0 because the tx queues are in the single existing channel
at index 0, together with the rx queue.
Without this fix, as soon as you try to send any traffic, it tries to
get the tx queues from an uninitialized channel getting these errors:
WARNING: CPU: 1 PID: 0 at drivers/net/ethernet/sfc/tx.c:540 efx_hard_start_xmit+0x12e/0x170 [sfc]
[...]
RIP: 0010:efx_hard_start_xmit+0x12e/0x170 [sfc]
[...]
Call Trace:
<IRQ>
dev_hard_start_xmit+0xd7/0x230
sch_direct_xmit+0x9f/0x360
__dev_queue_xmit+0x890/0xa40
[...]
BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
[...]
RIP: 0010:efx_hard_start_xmit+0x153/0x170 [sfc]
[...]
Call Trace:
<IRQ>
dev_hard_start_xmit+0xd7/0x230
sch_direct_xmit+0x9f/0x360
__dev_queue_xmit+0x890/0xa40
[...]
Fixes: c308dfd1b4 ("sfc: fix wrong tx channel offset with efx_separate_tx_channels")
Reported-by: Tianhao Zhao <tizhao@redhat.com>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220914103648.16902-1-ihuguet@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Fix HCIGETDEVINFO regression
* tag 'for-net-2022-09-09' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: Fix HCIGETDEVINFO regression
====================
Link: https://lore.kernel.org/r/20220909201642.3810565-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The hwstats debugfs files are only writeable, but they are created with
read and write permissions, causing certain selftests to fail [1].
Fix by creating the files with write permission only.
[1]
# ./test_offload.py
Test destruction of generic XDP...
Traceback (most recent call last):
File "/home/idosch/code/linux/tools/testing/selftests/bpf/./test_offload.py", line 810, in <module>
simdev = NetdevSimDev()
[...]
Exception: Command failed: cat /sys/kernel/debug/netdevsim/netdevsim0//ports/0/dev/hwstats/l3/disable_ifindex
cat: /sys/kernel/debug/netdevsim/netdevsim0//ports/0/dev/hwstats/l3/disable_ifindex: Invalid argument
Fixes: 1a6d7ae7d6 ("netdevsim: Introduce support for L3 offload xstats")
Reported-by: Jie2x Zhou <jie2x.zhou@intel.com>
Tested-by: Jie2x Zhou <jie2x.zhou@intel.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20220909153830.3732504-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While converting max_tx_rate from bytes to Mbps, this value was set to 0,
if the original value was lower than 125000 bytes (1 Mbps). This would
cause no transmission rate limiting to occur. This happened due to lack of
check of max_tx_rate against the 1 Mbps value for max_tx_rate and the
following division by 125000. Fix this issue by adding a helper
i40e_bw_bytes_to_mbits() which sets max_tx_rate to minimum usable value of
50 Mbps, if its value is less than 1 Mbps, otherwise do the required
conversion by dividing by 125000.
Fixes: 5ecae4120a ("i40e: Refactor VF BW rate limiting")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Andrii Staikov <andrii.staikov@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Max MTU sent to VF is set to 0 during memory allocation. It cause
that max MTU on VF is changed to IAVF_MAX_RXBUFFER and does not
depend on data from HW.
Set max_mtu field in virtchnl_vf_resource struct to inform
VF in GET_VF_RESOURCES msg what size should be max frame.
Fixes: dab86afdbb ("i40e/i40evf: Change the way we limit the maximum frame size for Rx")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
After setting port VLAN and MTU to 9000 on VF with ice driver there
was an iavf error
"PF returned error -5 (IAVF_ERR_PARAM) to our request 6".
During queue configuration, VF's max packet size was set to
IAVF_MAX_RXBUFFER but on ice max frame size was smaller by VLAN_HLEN
due to making some space for port VLAN as VF is not aware whether it's
in a port VLAN. This mismatch in sizes caused ice to reject queue
configuration with ERR_PARAM error. Proper max_mtu is sent from ice PF
to VF with GET_VF_RESOURCES msg but VF does not look at this.
In iavf change max_frame from IAVF_MAX_RXBUFFER to max_mtu
received from pf with GET_VF_RESOURCES msg to make vf's
max_frame_size dependent from pf. Add check if received max_mtu is
not in eligible range then set it to IAVF_MAX_RXBUFFER.
Fixes: dab86afdbb ("i40e/i40evf: Change the way we limit the maximum frame size for Rx")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix bad page state, free inappropriate page in handling dummy
descriptor. iavf_build_skb now has to check not only if rx_buffer is
NULL but also if size is zero, same thing in iavf_clean_rx_irq.
Without this patch driver would free page that will be used
by napi_build_skb.
Fixes: a9f49e0060 ("iavf: Fix handling of dummy receive descriptors")
Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Use READ_ONCE_NOCHECK() when reading the stack to prevent KASAN splats
when dump_stack() is used.
Fixes: 5b301409e8 ("UML: add support for KASAN under x86_64")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
OpenWrt's UML with 5.15 was producing odd errors/warnings during preinit
part of the early userspace portion:
|[ 0.000000] Kernel command line: ubd0=root.img root=98:0 console=tty
|[...]
|[ 0.440000] random: jshn: uninitialized urandom read (4 bytes read)
|[ 0.460000] random: jshn: uninitialized urandom read (4 bytes read)
|/etc/preinit: line 47: can't create /dev/tty: No such device or address
|/etc/preinit: line 48: can't create /dev/tty: No such device or address
|/etc/preinit: line 58: can't open /dev/tty: No such device or address
|[...] repeated many times
That "/dev/tty" came from the command line (which is automatically
added if no console= parameter was specified for the uml binary).
The TLDP project tells the following about the /dev/tty:
<https://tldp.org/HOWTO/Text-Terminal-HOWTO-7.html#ss7.3>
| /dev/tty stands for the controlling terminal (if any) for the current
| process.[...]
| /dev/tty is something like a link to the actually terminal device[..]
The "(if any)" is important here, since it's possible for processes to
not have a controlling terminal.
I think this was a simple typo and the author wanted tty0 there.
CC: Thomas Meyer <thomas@m3y3r.de>
Fixes: d7ffac3363 ("um: stdio_console: Make preferred console")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
arch.tls_array is statically allocated so checking for NULL doesn't
make sense. This causes the compiler warning below.
Remove the checks to silence these warnings.
../arch/x86/um/tls_32.c: In function 'get_free_idx':
../arch/x86/um/tls_32.c:68:13: warning: the comparison will always evaluate as 'true' for the address of 'tls_array' will never be NULL [-Waddress]
68 | if (!t->arch.tls_array)
| ^
In file included from ../arch/x86/um/asm/processor.h:10,
from ../include/linux/rcupdate.h:30,
from ../include/linux/rculist.h:11,
from ../include/linux/pid.h:5,
from ../include/linux/sched.h:14,
from ../arch/x86/um/tls_32.c:7:
../arch/x86/um/asm/processor_32.h:22:31: note: 'tls_array' declared here
22 | struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
| ^~~~~~~~~
../arch/x86/um/tls_32.c: In function 'get_tls_entry':
../arch/x86/um/tls_32.c:243:13: warning: the comparison will always evaluate as 'true' for the address of 'tls_array' will never be NULL [-Waddress]
243 | if (!t->arch.tls_array)
| ^
../arch/x86/um/asm/processor_32.h:22:31: note: 'tls_array' declared here
22 | struct uml_tls_struct tls_array[GDT_ENTRY_TLS_ENTRIES];
| ^~~~~~~~~
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Richard Weinberger <richard@nod.at>
Like in f4f03f299a
"um: Cleanup syscall_handler_t definition/cast, fix warning",
remove the cast to to fix the compiler warning.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Signed-off-by: Richard Weinberger <richard@nod.at>
On probe of the ASoC component, the device is reset but the regcache is
retained. This means the regcache gets out of sync if the codec is
rebound to a sound card for a second time. Fix it by reinitializing the
regcache to defaults after the device is reset.
Fixes: b0bcbe6157 ("ASoC: tas2770: Fix calling reset in probe")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20220919173453.84292-1-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On resuming, we anticipate that the jack is detected before playback
or capture. Therefore, we use semaphore to control the jack detection
done without any bothering. During booting, the driver launches jack
detection and releases the semaphore. However, it doesn't perceive the
maniputation of semaphore is not like resuming procedure. This makes
the semaphore's count value become to 2. There is more than one thread
can enter into the critical section. This may get unexpected situation
and make some chaos.
Signed-off-by: SJLIN0 <SJLIN0@nuvoton.com>
Signed-off-by: Wallace Lin <savagecin@gmail.com>
Link: https://lore.kernel.org/r/20220915012800.825196-1-SJLIN0@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With commit 0c24e06119 ("mm: kmemleak: add rbtree and store physical
address for objects allocated with PA"), kmemleak started to put the
objects allocated with physical address onto object_phys_tree_root tree.
The kmemleak_free_part() therefore no longer worked as expected on
physically allocated objects (hyp_mem_base in this case) as it attempted to
search and remove things in object_tree_root tree.
Fix it by using kmemleak_free_part_phys() to unregister hyp_mem_base. This
fixes an immediate crash when booting a KVM host in protected mode with
kmemleak enabled.
Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220908130659.2021-1-yuzenghui@huawei.com
Fix Oops in dasd_alias_get_start_dev() function caused by the pavgroup
pointer being NULL.
The pavgroup pointer is checked on the entrance of the function but
without the lcu->lock being held. Therefore there is a race window
between dasd_alias_get_start_dev() and _lcu_update() which sets
pavgroup to NULL with the lcu->lock held.
Fix by checking the pavgroup pointer with lcu->lock held.
Cc: <stable@vger.kernel.org> # 2.6.25+
Fixes: 8e09f21574 ("[S390] dasd: add hyper PAV support to DASD device driver, part 1")
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Reviewed-by: Jan Hoeppner <hoeppner@linux.ibm.com>
Link: https://lore.kernel.org/r/20220919154931.4123002-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
commit 0060c87833 ("net: stmmac: implement support for passive mode
converters via dt") has changed the plat->interface field semantics from
containing the PHY-mode to specifying the MAC-PCS interface mode. Due to
that the loongson32 platform code will leave the phylink interface
uninitialized with the PHY-mode intended by the means of the actual
platform setup. The commit-author most likely has just missed the
arch-specific code to fix. Let's mend the Loongson32 platform code then by
assigning the PHY-mode to the phy_interface field of the STMMAC platform
data.
Fixes: 0060c87833 ("net: stmmac: implement support for passive mode converters via dt")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Signed-off-by: Keguang Zhang <keguang.zhang@gmail.com>
Tested-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When doing slub_debug test, kfence's 'test_memcache_typesafe_by_rcu'
kunit test case cause a use-after-free error:
BUG: KASAN: use-after-free in kobject_del+0x14/0x30
Read of size 8 at addr ffff888007679090 by task kunit_try_catch/261
CPU: 1 PID: 261 Comm: kunit_try_catch Tainted: G B N 6.0.0-rc5-next-20220916 #17
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x48
print_address_description.constprop.0+0x87/0x2a5
print_report+0x103/0x1ed
kasan_report+0xb7/0x140
kobject_del+0x14/0x30
kmem_cache_destroy+0x130/0x170
test_exit+0x1a/0x30
kunit_try_run_case+0xad/0xc0
kunit_generic_run_threadfn_adapter+0x26/0x50
kthread+0x17b/0x1b0
</TASK>
The cause is inside kmem_cache_destroy():
kmem_cache_destroy
acquire lock/mutex
shutdown_cache
schedule_work(kmem_cache_release) (if RCU flag set)
release lock/mutex
kmem_cache_release (if RCU flag not set)
In some certain timing, the scheduled work could be run before
the next RCU flag checking, which can then get a wrong value
and lead to double kmem_cache_release().
Fix it by caching the RCU flag inside protected area, just like 'refcnt'
Fixes: 0495e337b7 ("mm/slab_common: Deleting kobject in kmem_cache_destroy() without holding slab_mutex/cpu_hotplug_lock")
Signed-off-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
During the code change to add the support for devres-managed card
instance, we put an explicit kfree(card) call at the error path in
snd_card_new(). This is needed for the early error path before the
card is initialized with the device, but is rather superfluous and
causes a double-free at the error path after the card instance is
initialized, as the destructor of the card object already contains a
kfree() call.
This patch fixes the double-free situation by removing the superfluous
kfree(). Meanwhile we need to call kfree() explicitly for the early
error path, so it's added there instead.
Fixes: e8ad415b7a ("ALSA: core: Add managed card creation")
Reported-by: Rondreis <linhaoguo86@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAB7eexL1zBnB636hwS27d-LdPYZ_R1-5fJS_h=ZbCWYU=UPWJg@mail.gmail.com
Link: https://lore.kernel.org/r/20220919123516.28222-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull parisc architecture fixes from Helge Deller:
"Some small parisc architecture fixes for 6.0-rc6:
One patch lightens up a previous commit and thus unbreaks building the
debian kernel, which tries to configure a 64-bit kernel with the
ARCH=parisc environment variable set.
The other patches fixes asm/errno.h includes in the tools directory
and cleans up memory allocation in the iosapic driver.
Summary:
- Allow configuring 64-bit kernel with ARCH=parisc
- Fix asm/errno.h includes in tools directory for parisc and xtensa
- Clean up iosapic memory allocation
- Minor typo and spelling fixes"
* tag 'parisc-for-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Allow CONFIG_64BIT with ARCH=parisc
parisc: remove obsolete manual allocation aligning in iosapic
tools/include/uapi: Fix <asm/errno.h> for parisc and xtensa
Input: hp_sdc: fix spelling typo in comment
parisc: ccio-dma: Add missing iounmap in error path in ccio_probe()
Pull io_uring fixes from Jens Axboe:
"Nothing really major here, but figured it'd be nicer to just get these
flushed out for -rc6 so that the 6.1 branch will have them as well.
That'll make our lives easier going forward in terms of development,
and avoid trivial conflicts in this area.
- Simple trace rename so that the returned opcode name is consistent
with the enum definition (Stefan)
- Send zc rsrc request vs notification lifetime fix (Pavel)"
* tag 'io_uring-6.0-2022-09-18' of git://git.kernel.dk/linux:
io_uring/opdef: rename SENDZC_NOTIF to SEND_ZC
io_uring/net: fix zc fixed buf lifetime
memcpy() is called in a loop while 'operation->length' upper bound
is not checked and 'data_idx' also increments.
Fixes: b5b5b32081 ("i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC")
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Correct the base address used during io write.
This bug had no impact over the overall functionality of the read and write
transactions. MLXBF_I2C_CAUSE_OR_CLEAR=0x18 so writing to (smbus->io + 0x18)
instead of (mst_cause->ioi + 0x18) actually writes to the sc_low_timeout
register which just sets the timeout value before a read/write aborts.
Fixes: b5b5b32081 (i2c: mlxbf: I2C SMBus driver for Mellanox BlueField SoC)
Reviewed-by: Khalil Blaiech <kblaiech@nvidia.com>
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
riscv has an equivalent of arm bug fixed by 653d48b221 ("arm: fix
really nasty sigreturn bug"); if signal gets caught by an interrupt that
hits when we have the right value in a0 (-513), *and* another signal
gets delivered upon sigreturn() (e.g. included into the blocked mask for
the first signal and posted while the handler had been running), the
syscall restart logics will see regs->cause equal to EXC_SYSCALL (we are
in a syscall, after all) and a0 already restored to its original value
(-513, which happens to be -ERESTARTNOINTR) and assume that we need to
apply the usual syscall restart logics.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: e2c0cdfba7 ("RISC-V: User-facing API")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/YxJEiSq%2FCGaL6Gm9@ZenIV/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
We were failing to call kasan_malloc() from __kmalloc_*track_caller()
which was causing us to sometimes fail to produce KASAN error reports
for allocations made using e.g. devm_kcalloc(), as the KASAN poison was
not being initialized. Fix it.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Cc: <stable@vger.kernel.org> # 5.15
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Pull gpio fixes from Bartosz Golaszewski:
- fix the level-low interrupt type support in gpio-mpc8xxx
- convert another two drivers to using immutable irq chips
- MAINTAINERS update
* tag 'gpio-fixes-for-v6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mt7621: Make the irqchip immutable
gpio: ixp4xx: Make irqchip immutable
MAINTAINERS: Update HiSilicon GPIO Driver maintainer
gpio: mpc8xxx: Fix support for IRQ_TYPE_LEVEL_LOW flow_type in mpc85xx
His email bounced and given commit 88115ea630 ("HID: amd_sfh: Remove
name from maintainers list"), I assume he is no longer available as a
maintainer.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
pm_runtime_get_sync() returning 1 also means the device is powered. So
resetting the chip registers in .remove() is possible and should be
done.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: d98bdd3a5b ("i2c: imx: Make sure to unregister adapter on remove()")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
When the user space pcm stream uses the silent stream converter,
it is no longer allocated for the silent stream. Clear the appropriate
flag in the hdmi_pcm_open() function. The silent stream setup may
be applied in hdmi_pcm_close() (and the error path - open fcn) again.
If the flag is not cleared, the reuse conditions for the silent
stream converter in hdmi_choose_cvt() may improperly share
this converter.
Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20220913070216.3233974-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull pin control fixes from Linus Walleij:
"Nothing special, just driver fixes:
- Fix IRQ wakeup and pins for UFS and SDC2 issues on the Qualcomm
SC8180x
- Fix the Rockchip driver to support interrupt on both rising and
falling edges.
- Name the Allwinner A100 R_PIO properly
- Fix several issues with the Ocelot interrupts"
* tag 'pinctrl-v6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: ocelot: Fix interrupt controller
pinctrl: sunxi: Fix name for A100 R_PIO
pinctrl: rockchip: Enhance support for IRQ_TYPE_EDGE_BOTH
pinctrl: qcom: sc8180x: Fix wrong pin numbers
pinctrl: qcom: sc8180x: Fix gpio_wakeirq_map
Pull block fixes from Jens Axboe:
"Two fixes for -rc6:
- Fix a mixup of sectors and bytes in the secure erase ioctl
(Mikulas)
- Fix for a bad return value for a non-blocking bio/blk queue enter
call (me)"
* tag 'block-6.0-2022-09-16' of git://git.kernel.dk/linux-block:
blk-lib: fix blkdev_issue_secure_erase
block: blk_queue_enter() / __bio_queue_enter() must return -EAGAIN for nowait
Pull io_uring fixes from Jens Axboe:
"Two small patches:
- Fix using an unsigned type for the return value, introduced in this
release (Pavel)
- Stable fix for a missing check for a fixed file on put (me)"
* tag 'io_uring-6.0-2022-09-16' of git://git.kernel.dk/linux-block:
io_uring/msg_ring: check file type before putting
io_uring/rw: fix error'ed retry return values
Pull drm fixes from Dave Airlie:
"This is the regular drm fixes pull.
The i915 and misc fixes are fairly regular, but the amdgpu contains
fixes for new hw blocks, the dcn314 specific path hookups and also has
a bunch of fixes for clang stack size warnings which are a bit churny
but fairly straightforward. This means it looks a little larger than
usual.
amdgpu:
- BACO fixes for some RDNA2 boards
- PCI AER fixes uncovered by a core PCI change
- Properly hook up dirtyfb helper
- RAS fixes for GC 11.x
- TMR fix
- DCN 3.2.x fixes
- DCN 3.1.4 fixes
- LLVM DML stack size fixes
i915:
- Revert a display patch around max DP source rate now that the
proper WaEdpLinkRateDataReload is in place
- Fix perf limit reasons bit position
- Fix unclaimmed mmio registers on suspend flow with GuC
- A vma_move_to_active fix for a regression with video decoding
- DP DSP fix
gma500:
- Locking and IRQ fixes
meson:
- OSD1 display fixes
panel-edp:
- Fix Innolux timings
rockchip:
- DP/HDMI fixes"
* tag 'drm-fixes-2022-09-16' of git://anongit.freedesktop.org/drm/drm: (42 commits)
drm/amdgpu: make sure to init common IP before gmc
drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega
drm/amdgpu: move nbio ih_doorbell_range() into ih code for vega
drm/rockchip: Fix return type of cdn_dp_connector_mode_valid
drm/amd/display: Mark dml30's UseMinimumDCFCLK() as noinline for stack usage
drm/amd/display: Reduce number of arguments of dml31's CalculateFlipSchedule()
drm/amd/display: Reduce number of arguments of dml31's CalculateWatermarksAndDRAMSpeedChangeSupport()
drm/amd/display: Reduce number of arguments of dml32_CalculatePrefetchSchedule()
drm/amd/display: Reduce number of arguments of dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport()
drm/amd/display: Refactor SubVP calculation to remove FPU
drm/amd/display: Limit user regamma to a valid value
drm/amd/display: add workaround for subvp cursor corruption for DCN32/321
drm/amd/display: SW cursor fallback for SubVP
drm/amd/display: Round cursor width up for MALL allocation
drm/amd/display: Correct dram channel width for dcn314
drm/amd/display: Relax swizzle checks for video non-RGB formats on DCN314
drm/amd/display: Hook up DCN314 specific dml implementation
drm/amd/display: Enable dlg and vba compilation for dcn314
drm/amd/display: Fix compilation errors on DCN314
drm/amd/display: Fix divide by zero in DML
...
Pull cifs fixes from Steve French:
"Four smb3 fixes for stable:
- important fix to revalidate mapping when doing direct writes
- missing spinlock
- two fixes to socket handling
- trivial change to update internal version number for cifs.ko"
* tag '6.0-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal module number
cifs: add missing spinlock around tcon refcount
cifs: always initialize struct msghdr smb_msg completely
cifs: don't send down the destination address to sendmsg for a SOCK_STREAM
cifs: revalidate mapping when doing direct writes
Test that the bonding and team drivers clean up an underlying device's
address lists (dev->uc, dev->mc) when the aggregated device is deleted.
Test addition and removal of the LACPDU multicast address on underlying
devices by the bonding driver.
v2:
* add lag_lib.sh to TEST_FILES
v3:
* extend bond_listen_lacpdu_multicast test to init_state up and down cases
* remove some superfluous shell syntax and 'set dev ... up' commands
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Netdev drivers are expected to call dev_{uc,mc}_sync() in their
ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method.
This is mentioned in the kerneldoc for those dev_* functions.
The team driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of
ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have
already been emptied in unregister_netdevice_many() before ndo_uninit is
called. This mistake can result in addresses being leftover on former team
ports after a team device has been deleted; see test_LAG_cleanup() in the
last patch in this series.
Add unsync calls at their expected location, team_close().
v3:
* When adding or deleting a port, only sync/unsync addresses if the team
device is up. In other cases, it is taken care of at the right time by
ndo_open/ndo_set_rx_mode/ndo_stop.
Fixes: 3d249d4ca7 ("net: introduce ethernet teaming device")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Netdev drivers are expected to call dev_{uc,mc}_sync() in their
ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method.
This is mentioned in the kerneldoc for those dev_* functions.
The bonding driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of
ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have
already been emptied in unregister_netdevice_many() before ndo_uninit is
called. This mistake can result in addresses being leftover on former bond
slaves after a bond has been deleted; see test_LAG_cleanup() in the last
patch in this series.
Add unsync calls, via bond_hw_addr_flush(), at their expected location,
bond_close().
Add dev_mc_add() call to bond_open() to match the above change.
v3:
* When adding or deleting a slave, only sync/unsync, add/del addresses if
the bond is up. In other cases, it is taken care of at the right time by
ndo_open/ndo_set_rx_mode/ndo_stop.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are already a few definitions of arrays containing
MULTICAST_LACPDU_ADDR and the next patch will add one more use. These all
contain the same constant data so define one common instance for all
bonding code.
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-09-08 (ice, iavf)
This series contains updates to ice and iavf drivers.
Dave removes extra unplug of auxiliary bus on reset which caused a
scheduling while atomic to be reported for ice.
Ding Hui defers setting of queues for TCs to ensure valid configuration
and restores old config if invalid for ice.
Sylwester fixes a check of setting MAC address to occur after result is
received from PF for iavf driver.
Brett changes check of ring tail to use software cached value as not all
devices have access to register tail for iavf driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Aldrin2 (98DX8525) is a Marvell Prestera PP, with 100G support.
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
V2:
- retarget to net tree instead of net-next;
- fix missed colon in patch subject ('net marvell' vs 'net: mavell');
Signed-off-by: David S. Miller <davem@davemloft.net>
There is uninit value bug in dgram_sendmsg function in
net/ieee802154/socket.c when the length of valid data pointed by the
msg->msg_name isn't verified.
We introducing a helper function ieee802154_sockaddr_check_size to
check namelen. First we check there is addr_type in ieee802154_addr_sa.
Then, we check namelen according to addr_type.
Also fixed in raw_bind, dgram_bind, dgram_connect.
Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Revert a display patch around max DP source rate now
that the proper WaEdpLinkRateDataReload is in place. (Ville)
- Fix perf limit reasons bit position. (Ashutosh)
- Fix unclaimmed mmio registers on suspend flow with GuC. (Umesh)
- A vma_move_to_active fix for a regression with video decoding. (Nirmoy)
- DP DSP fix. (Ankit)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YyMtmGMXRLsURoM5@intel.com
In __qedf_probe(), if qedf->cdev is NULL which means
qed_ops->common->probe() failed, then the program will goto label err1, and
scsi_host_put() will free lport->host pointer. Because the memory qedf
points to is allocated by libfc_host_alloc(), it will be freed by
scsi_host_put(). However, the if statement below label err0 only checks
whether qedf is NULL but doesn't check whether the memory has been freed.
So a UAF bug can occur.
There are two ways to reach the statements below err0. The first one is
described as before, "qedf" should be set to NULL. The second one is goto
"err0" directly. In the latter scenario qedf hasn't been changed and it has
the initial value NULL. As a result the if statement is not reachable in
any situation.
The KASAN logs are as follows:
[ 2.312969] BUG: KASAN: use-after-free in __qedf_probe+0x5dcf/0x6bc0
[ 2.312969]
[ 2.312969] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[ 2.312969] Call Trace:
[ 2.312969] dump_stack_lvl+0x59/0x7b
[ 2.312969] print_address_description+0x7c/0x3b0
[ 2.312969] ? __qedf_probe+0x5dcf/0x6bc0
[ 2.312969] __kasan_report+0x160/0x1c0
[ 2.312969] ? __qedf_probe+0x5dcf/0x6bc0
[ 2.312969] kasan_report+0x4b/0x70
[ 2.312969] ? kobject_put+0x25d/0x290
[ 2.312969] kasan_check_range+0x2ca/0x310
[ 2.312969] __qedf_probe+0x5dcf/0x6bc0
[ 2.312969] ? selinux_kernfs_init_security+0xdc/0x5f0
[ 2.312969] ? trace_rpm_return_int_rcuidle+0x18/0x120
[ 2.312969] ? rpm_resume+0xa5c/0x16e0
[ 2.312969] ? qedf_get_generic_tlv_data+0x160/0x160
[ 2.312969] local_pci_probe+0x13c/0x1f0
[ 2.312969] pci_device_probe+0x37e/0x6c0
Link: https://lore.kernel.org/r/20211112120641.16073-1-fantasquex@gmail.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Co-developed-by: Wende Tan <twd2.me@gmail.com>
Signed-off-by: Wende Tan <twd2.me@gmail.com>
Signed-off-by: Letu Ren <fantasquex@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 9a073d4fbb ("soc: bcm: brcmstb: biuctrl: Add missing
of_node_put()") added what was thought to be a missing of_node_put() but
now causes a double of_node_put() to be called, once from
setup_hifcpubiuctrl_regs() and another time from brcmstb_biuctrl_init().
Ensure that setup_hifcpubiuctrl_regs() is not calling of_node_put()
since it is not obvious it does that on one of its parameters.
Fixes: 9a073d4fbb ("soc: bcm: brcmstb: biuctrl: Add missing of_node_put()")
Reported-by: Jim Quinlan <jim2101024@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Change-Id: I1c405c36c2f06c8b8c0f684143b7a52db7e809f0
If we're invoked with a fixed file, follow the normal rules of not
calling io_fput_file(). Fixed files are permanently registered to the
ring, and do not need putting separately.
Cc: stable@vger.kernel.org
Fixes: aa184e8671 ("io_uring: don't attempt to IOPOLL for MSG_RING requests")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just as with the 5570 (and the other Dell laptops), this enables the two
subwoofer speakers on the Dell Precision 5530 together with the main
ones, significantly increasing the audio quality. I've tested this
myself on a 5530 and can confirm it's working as expected.
Signed-off-by: Callum Osmotherly <callum.osmotherly@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YyMjQO3mhyXlMbCf@piranha
Signed-off-by: Takashi Iwai <tiwai@suse.de>
i.MX fixes for 6.0, 2nd round:
- A couple of TQMa8MPQL device tree fixes from Alexander Stein on button
GPIOs and PCF85063 RTC alarm pinctrl.
- Include phy-imx8-pcie.h header in tqma8mqml-mba8mx device tree to fix
build errors when this SoM dtsi is included on customer carrier boards.
- Remove GPU power domain reset from i.MX8MN device tree to fix
a sporadical hang seen with GPUMIX powering up.
- Correct CPLD_Dn GPIO label mapping for Toradex Verdin based Menlo
board.
- Add ARCH_NXP back to defconfig, which was dropped accidentally by
commit 566e373fe0 ("arm64: Kconfig.platforms: Group NXP platforms
together").
- Add missing #reset-cells for i.MX8ULP PCC clock controllers.
- Update PMIC voltages for imx8mm-verdin board to fix an issue with one
Toradex SKU that uses a consumer-grade chip that is capable of going up
to 1.8GHz at 1.00V.
- A series of imx8mp-venice-gw74xx device tree changes from Tim Harvey
to fix things on CAN STBY polarity, KSZ9477 CPU uplink port and
phy-mode.
* tag 'imx-fixes-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mp-venice-gw74xx: fix port/phy validation
arm64: dts: imx8mp-venice-gw74xx: fix ksz9477 cpu port
arm64: dts: imx8mp-venice-gw74xx: fix CAN STBY polarity
arm64: dts: tqma8mqml: Include phy-imx8-pcie.h header
arm64: defconfig: enable ARCH_NXP
arm64: dts: imx8mp-tqma8mpql-mba8mpxl: add missing pinctrl for RTC alarm
arm64: dts: imx8mm-verdin: extend pmic voltages
arm64: dts: imx8ulp: add #reset-cells for pcc
arm64: dts: tqma8mpxl-ba8mpxl: Fix button GPIOs
arm64: dts: imx8mn: remove GPU power domain reset
arm64: dts: imx8mm: Reverse CPLD_Dn GPIO label mapping on MX8Menlo
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Mika writes:
"thunderbolt: Fix for v6.0-rc6
This includes a single commit adding missing PCI ID for Intel Maple
Ridge Thunderbolt 4 single port controller.
This has been in linux-next with no reported issues."
* tag 'thunderbolt-for-v6.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Add support for Intel Maple Ridge single port controller
There's a bug in blkdev_issue_secure_erase. The statement
"unsigned int len = min_t(sector_t, nr_sects, max_sectors);"
sets the variable "len" to the length in sectors, but the statement
"bio->bi_iter.bi_size = len" treats it as if it were in bytes.
The statements "sector += len << SECTOR_SHIFT" and "nr_sects -= len <<
SECTOR_SHIFT" are thinko.
This patch fixes it.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org # v5.19
Fixes: 44abff2c0b ("block: decouple REQ_OP_SECURE_ERASE from REQ_OP_DISCARD")
Link: https://lore.kernel.org/r/alpine.LRH.2.02.2209141549480.28100@file01.intranet.prod.int.rdu2.redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The previous patch triggered a build failure for the debian kernel,
which has CONFIG_64BIT enabled, uses the CROSS_COMPILER environment
variable and uses ARCH=parisc to configure the kernel for 64-bit
support.
This patch weakens the previous patch while keeping the recommended way
to configure the kernel with:
ARCH=parisc -> build 32-bit kernel
ARCH=parisc64 -> build 64-bit kernel
while adding the possibility for debian to configure a 64-bit kernel
even if ARCH=parisc is set (PA8X00 CPU has to be selected and
CONFIG_64BIT needs to be enabled).
The downside of this patch is, that we now have a small window open
again where people may get it wrong: if they enable CONFIG_64BIT and try
to compile with a 32-bit compiler.
Fixes: 3dcfb729b5 ("parisc: Make CONFIG_64BIT available for ARCH=parisc64 only")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # 5.15+
kmalloc() returns memory with __assume_kmalloc_alignment, which is
__alignof__(unsigned long long) for parisc.
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Helge Deller <deller@gmx.de>
there is only one SDMA engine in SDMA 6.0.1, the sdma_hqd_mask has to be
zeroed for the 2nd engine, otherwise MES scheduler will consider 2nd
engine exists and map/unmap SDMA queues to the non-existent engine.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move common IP init before GMC init so that HDP gets
remapped before GMC init which uses it.
This fixes the Unsupported Request error reported through
AER during driver load. The error happens as a write happens
to the remap offset before real remapping is done.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.
Fixes: 8795e182b0 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This mirrors what we do for other asics and this way we are
sure the sdma doorbell range is properly initialized.
There is a comment about the way doorbells on gfx9 work that
requires that they are initialized for other IPs before GFX
is initialized. However, the statement says that it applies to
multimedia as well, but the VCN code currently initializes
doorbells after GFX and there are no known issues there. In my
testing at least I don't see any problems on SDMA.
This is a prerequisite for fixing the Unsupported Request error
reported through AER during driver load.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.
Fixes: 8795e182b0 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This mirrors what we do for other asics and this way we are
sure the ih doorbell range is properly initialized.
There is a comment about the way doorbells on gfx9 work that
requires that they are initialized for other IPs before GFX
is initialized. In this case IH is initialized before GFX,
so there should be no issue.
This is a prerequisite for fixing the Unsupported Request error
reported through AER during driver load.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.
Fixes: 8795e182b0 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
These changes simplify the Makefile and handle these 5 ways to build
Landlock tests:
- make -C tools/testing/selftests/landlock
- make -C tools/testing/selftests TARGETS=landlock gen_tar
- make TARGETS=landlock kselftest-gen_tar
- make TARGETS=landlock O=build kselftest-gen_tar
- make -C /tmp/linux TARGETS=landlock O=/tmp/build kselftest-gen_tar
This also makes $(KHDR_INCLUDES) available to other test collections
when building in their directory.
Fixes: f1227dc7d0 ("selftests/landlock: fix broken include of linux/landlock.h")
Fixes: 3bb267a361 ("selftests: drop khdr make target")
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Guillaume Tucker <guillaume.tucker@collabora.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Link: https://lore.kernel.org/r/20220909103402.1501802-1-mic@digikod.net
When an external device generated a level based interrupt then the
interrupt controller could miss the interrupt. The reason is that the
interrupt controller can detect only link changes.
In the following example, if there is a PHY that generates an interrupt
then the following would happen. The GPIO detected that the interrupt
line changed, and then the 'ocelot_irq_handler' was called. Here it
detects which GPIO line saw the change and for that will call the
following:
1. irq_mask
2. phy interrupt routine
3. irq_eoi
4. irq_unmask
And this works fine for simple cases, but if the PHY generates many
interrupts, for example when doing PTP timestamping, then the following
could happen. Again the function 'ocelot_irq_handler' will be called
and then from here the following could happen:
1. irq_mask
2. phy interrupt routine
3. irq_eoi
4. irq_unmask
Right before step 3(irq_eoi), the PHY will generate another interrupt.
Now the interrupt controller will acknowledge the change in the
interrupt line. So we miss the interrupt.
A solution will be to use 'handle_level_irq' instead of
'handle_fasteoi_irq', because for this will change routine order of
handling the interrupt.
1. irq_mask
2. irq_ack
3. phy interrupt routine
4. irq_unmask
And now if the PHY will generate a new interrupt before irq_unmask, the
interrupt controller will detect this because it already acknowledge the
change in interrupt line at step 2(irq_ack).
But this is not the full solution because there is another issue. In
case there are 2 PHYs that share the interrupt line. For example phy1
generates an interrupt, then the following can happen:
1.irq_mask
2.irq_ack
3.phy0 interrupt routine
4.phy1 interrupt routine
5.irq_unmask
In case phy0 will generate an interrupt while clearing the interrupt
source in phy1, then the interrupt line will be kept down by phy0. So
the interrupt controller will not see any changes in the interrupt line.
The solution here is to update 'irq_unmask' such that it can detect if
the interrupt line is still active or not. And if it is active then call
again the procedure to clear the interrupts. But we don't want to do it
every time, only if we know that the interrupt controller has not seen
already that the interrupt line has changed.
While at this, add support also for IRQ_TYPE_LEVEL_LOW.
Fixes: be36abb71d ("pinctrl: ocelot: add support for interrupt controller")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20220909145942.844102-1-horatiu.vultur@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Commit 6c846d026d ("gpio: Don't fiddle with irqchips marked as
immutable") added a warning to indicate if the gpiolib is altering the
internals of irqchips. Following this change the following warnings
are now observed for the mt7621 driver:
gpio gpiochip0: (1e000600.gpio-bank0): not an immutable chip, please consider fixing it!
gpio gpiochip1: (1e000600.gpio-bank1): not an immutable chip, please consider fixing it!
gpio gpiochip2: (1e000600.gpio-bank2): not an immutable chip, please consider fixing it!
Fix this by making the irqchip in the mt7621 driver immutable.
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Pull devicetree fixes from Rob Herring:
- Update some stale binding maintainer emails
- Fix property name error in apple,aic binding
- Add missing param to of_dma_configure_id() stub
- Fix an off-by-one error in unflatten_dt_nodes()
* tag 'devicetree-fixes-for-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: pinctrl: qcom: drop non-working codeaurora.org emails
dt-bindings: power: qcom,rpmpd: drop non-working codeaurora.org emails
dt-bindings: apple,aic: Fix required item "apple,fiq-index" in affinity description
dt-bindings: interconnect: fsl,imx8m-noc: drop Leonard Crestez
of/device: Fix up of_dma_configure_id() stub
MAINTAINERS: Update email of Neil Armstrong
of: fdt: fix off-by-one error in unflatten_dt_nodes()
The Dell Precision 5570 uses the same 4-speakers-on-ALC289 just like the
previous Precision 5560. I replicated that patch onto this one, and can
confirm that the audio is much better (the woofers are now working);
I've tested it on my Dell Precision 5570.
Signed-off-by: Callum Osmotherly <callum.osmotherly@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YyGbWM5wEoFMbW2v@piranha
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add missing spinlock to protect updates on tcon refcount in
cifs_put_tcon().
Fixes: d7d7a66aac ("cifs: avoid use of global locks for high contention data")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
There is an array bounds violation present during clock registration,
triggered by current code by only specific toolchains. This seems to
fail gracefully in v6.0-rc1, using a toolchain build from the riscv-
gnu-toolchain repo and with clang-15, and life carries on. While
converting the driver to use standard clock structs/ops, kernel panics
were seen during boot when built with clang-15:
[ 0.581754] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000b1
[ 0.591520] Oops [#1]
[ 0.594045] Modules linked in:
[ 0.597435] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.0.0-rc1-00011-g8e1459cf4eca #1
[ 0.606188] Hardware name: Microchip PolarFire-SoC Icicle Kit (DT)
[ 0.613012] epc : __clk_register+0x4a6/0x85c
[ 0.617759] ra : __clk_register+0x49e/0x85c
[ 0.622489] epc : ffffffff803faf7c ra : ffffffff803faf74 sp : ffffffc80400b720
[ 0.630466] gp : ffffffff810e93f8 tp : ffffffe77fe60000 t0 : ffffffe77ffb3800
[ 0.638443] t1 : 000000000000000a t2 : ffffffffffffffff s0 : ffffffc80400b7c0
[ 0.646420] s1 : 0000000000000001 a0 : 0000000000000001 a1 : 0000000000000000
[ 0.654396] a2 : 0000000000000001 a3 : 0000000000000000 a4 : 0000000000000000
[ 0.662373] a5 : ffffffff803a5810 a6 : 0000000200000022 a7 : 0000000000000006
[ 0.670350] s2 : ffffffff81099d48 s3 : ffffffff80d6e28e s4 : 0000000000000028
[ 0.678327] s5 : ffffffff810ed3c8 s6 : ffffffff810ed3d0 s7 : ffffffe77ffbc100
[ 0.686304] s8 : ffffffe77ffb1540 s9 : ffffffe77ffb1540 s10: 0000000000000008
[ 0.694281] s11: 0000000000000000 t3 : 00000000000000c6 t4 : 0000000000000007
[ 0.702258] t5 : ffffffff810c78c0 t6 : ffffffe77ff88cd0
[ 0.708125] status: 0000000200000120 badaddr: 00000000000000b1 cause: 000000000000000d
[ 0.716869] [<ffffffff803fb892>] devm_clk_hw_register+0x62/0xaa
[ 0.723420] [<ffffffff80403412>] mpfs_clk_probe+0x1e0/0x244
In v6.0-rc1 and later, this issue is visible without the follow on
patches doing the conversion using toolchains provided by our Yocto
meta layer too.
It fails on "clk_periph_timer" - which uses a different parent, that it
tries to find using the macro:
\#define PARENT_CLK(PARENT) (&mpfs_cfg_clks[CLK_##PARENT].cfg.hw)
If parent is RTCREF, so the macro becomes: &mpfs_cfg_clks[33].cfg.hw
which is well beyond the end of the array. Amazingly, builds with GCC
11.1 see no problem here, booting correctly and hooking the parent up
etc. Builds with clang-15 do not, with the above panic.
Change the macro to use specific offsets depending on the parent rather
than the dt-binding's clock IDs.
Fixes: 1c6a7ea32b ("clk: microchip: mpfs: add RTCREF clock control")
CC: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220909123123.2699583-2-conor.dooley@microchip.com
So far we were just lucky because the uninitialized members
of struct msghdr are not used by default on a SOCK_STREAM tcp
socket.
But as new things like msg_ubuf and sg_from_iter where added
recently, we should play on the safe side and avoid potention
problems in future.
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Since commit 65ac79e181 ("net: dsa: microchip: add the phylink
get_caps") the phy-mode must be set otherwise the switch driver will
assume "NA" mode and invalidate the port.
Fixes: 7899eb6cb1 ("arm64: dts: imx: Add i.MX8M Plus Gateworks gw7400 dts support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Today blk_queue_enter() and __bio_queue_enter() return -EBUSY for the
nowait code path. This is not correct: they should return -EAGAIN
instead.
This problem was detected by fio. The following command exposed the
above problem:
t/io_uring -p0 -d128 -b4096 -s32 -c32 -F1 -B0 -R0 -X1 -n24 -P1 -u1 -O0 /dev/ng0n1
By applying the patch, the retry case is handled correctly in the slow
path.
Signed-off-by: Stefan Roesch <shr@fb.com>
Fixes: bfd343aa17 ("blk-mq: don't wait in blk_mq_queue_enter() if __GFP_WAIT isn't set")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This function consumes a lot of stack space and it blows up the size of
dml30_ModeSupportAndSystemConfigurationFull() with clang:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn30/display_mode_vba_30.c:3542:6: error: stack frame size (2200) exceeds limit (2048) in 'dml30_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
void dml30_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
^
1 error generated.
Commit a0f7e7f759 ("drm/amd/display: fix i386 frame size warning")
aimed to address this for i386 but it did not help x86_64.
To reduce the amount of stack space that
dml30_ModeSupportAndSystemConfigurationFull() uses, mark
UseMinimumDCFCLK() as noinline, using the _for_stack variant for
documentation. While this will increase the total amount of stack usage
between the two functions (1632 and 1304 bytes respectively), it will
make sure both stay below the limit of 2048 bytes for these files. The
aforementioned change does help reduce UseMinimumDCFCLK()'s stack usage
so it should not be reverted in favor of this change.
Link: https://github.com/ClangBuiltLinux/linux/issues/1681
Reported-by: "Sudip Mukherjee (Codethink)" <sudipm.mukherjee@gmail.com>
Tested-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Most of the arguments are identical between the two call sites and they
can be accessed through the 'struct vba_vars_st' pointer. This reduces
the total amount of stack space that
dml31_ModeSupportAndSystemConfigurationFull() uses by 112 bytes with
LLVM 16 (1976 -> 1864), helping clear up the following clang warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c:3908:6: error: stack frame size (2216) exceeds limit (2048) in 'dml31_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
void dml31_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
^
1 error generated.
Link: https://github.com/ClangBuiltLinux/linux/issues/1681
Reported-by: "Sudip Mukherjee (Codethink)" <sudipm.mukherjee@gmail.com>
Tested-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Most of the arguments are identical between the two call sites and they
can be accessed through the 'struct vba_vars_st' pointer. This reduces
the total amount of stack space that
dml31_ModeSupportAndSystemConfigurationFull() uses by 240 bytes with
LLVM 16 (2216 -> 1976), helping clear up the following clang warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn31/display_mode_vba_31.c:3908:6: error: stack frame size (2216) exceeds limit (2048) in 'dml31_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
void dml31_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
^
1 error generated.
Link: https://github.com/ClangBuiltLinux/linux/issues/1681
Reported-by: "Sudip Mukherjee (Codethink)" <sudipm.mukherjee@gmail.com>
Tested-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Several of the arguments are identical between the two call sites and
they can be accessed through the 'struct vba_vars_st' pointer. This
reduces the total amount of stack space that
dml32_ModeSupportAndSystemConfigurationFull() uses by 208 bytes with
LLVM 16 (1936 -> 1728), helping clear up the following clang warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:1721:6: error: stack frame size (2152) exceeds limit (2048) in 'dml32_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
^
1 error generated.
Additionally, while modifying the arguments to
dml32_CalculatePrefetchSchedule(), use 'v' consistently, instead of 'v'
mixed with 'mode_lib->vba'.
Link: https://github.com/ClangBuiltLinux/linux/issues/1681
Reported-by: "Sudip Mukherjee (Codethink)" <sudipm.mukherjee@gmail.com>
Tested-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Most of the arguments are identical between the two call sites and they
can be accessed through the 'struct vba_vars_st' pointer created at the
top of dml32_ModeSupportAndSystemConfigurationFull(). This reduces the
total amount of stack space that
dml32_ModeSupportAndSystemConfigurationFull() uses by 216 bytes with
LLVM 16 (2152 -> 1936), helping clear up the following clang warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:1721:6: error: stack frame size (2152) exceeds limit (2048) in 'dml32_ModeSupportAndSystemConfigurationFull' [-Werror,-Wframe-larger-than]
void dml32_ModeSupportAndSystemConfigurationFull(struct display_mode_lib *mode_lib)
^
1 error generated.
Additionally, while modifying the arguments to
dml32_CalculateWatermarksMALLUseAndDRAMSpeedChangeSupport(), use 'v'
consistently, instead of 'v' mixed with 'mode_lib->vba'.
Link: https://github.com/ClangBuiltLinux/linux/issues/1681
Reported-by: "Sudip Mukherjee (Codethink)" <sudipm.mukherjee@gmail.com>
Tested-by: Maíra Canal <mairacanal@riseup.net>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For HDR mode, we get total 512 tf_point and after switching to SDR mode
we actually get 400 tf_point and the rest of points(401~512) still use
dirty value from HDR mode. We should limit the rest of the points to max
value.
[How]
Limit the value when coordinates_x.x > 1, just like what we do in
translate_from_linear_space for other re-gamma build paths.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Yao Wang1 <Yao.Wang1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Kernel does not have a means to tell the userspace to use software
cursor. Due to lack of this functionality, reducing the max cursor size
is the only way to ensure that power savings of Subview port feature is
utilized for asics that support it. The workaround could be removed
after cursor caching is fixed while a subviewport config is active.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
Leverage SW cursor fall back for SubVP when the cursor is too big. We
want to take advantage of being able to fallback to SW cursor when
possible because it's not worth it to disable MCLK switching because the
cursor is slightly too big.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
When calculating cursor size for MALL allocation, the cursor width should
be the actual width rounded up to 64 alignment. Additionally, the bit
depth should vary depending on color format.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add support for the DML314 functions and hook up DCN314 to use them.
This has some necessary additions for calculating Max VSTARTUP for
future features, but there's also some changes that we have to make
for pixel format/swizzle support.
That will come in a following patch to make this transition easier to
bisect.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We were not using the VBA and DLG files for DCN314, but the next
sequence of changes for DCN314 will require those files. This commit
adds the necessary files to the Makefile.
Cc: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We have some compilation errors in some DML files from DCN314 that we
never noticed because we were not compiling some of the DML files. This
commit fixes those syntax errors before we enable the compilation.
Cc: Roman Li <roman.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Was missing before and would have resulted in a write to
a non-existant register. Normally APUs don't use HDP, but
other asics could use this code and APUs do use the HDP
when used in passthrough.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
align TMR BO size TO tmr size is not necessary,
modify the size to 1M to avoid re-create BO fail
when serious VRAM fragmentation.
v2:
add new macro PSP_TMR_ALIGNMENT for TMR BO alignment size
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, we aren't handling DRM_IOCTL_MODE_DIRTYFB. So, use
drm_atomic_helper_dirtyfb() as the dirty callback in the amdgpu_fb_funcs
struct.
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As per PCIE Base Spec r4.0 Section 6.18
'Software must not enable LTR in an Endpoint unless the Root Complex
and all intermediate Switches indicate support for LTR.'
This fixes the Unsupported Request error reported through AER during
ASPM enablement.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216455
The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.
Fixes: 8795e182b0 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
Reported-by: Gustaw Smolarczyk <wielkiegie@gmail.com>
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 133e2d3e81.
Alexey pointed out a few undesirable side effects of the reverted change.
First, it doesn't take into account that CLONE_VFORK can be used with
CLONE_THREAD. Second, a child process doesn't enter a target time name-space,
if its parent dies before the child calls exec. It happens because the parent
clears vfork_done.
Eric W. Biederman suggests installing a time namespace as a task gets a new mm.
It includes all new processes cloned without CLONE_VM and all tasks that call
exec(). This is an user API change, but we think there aren't users that depend
on the old behavior.
It is too late to make such changes in this release, so let's roll back
this patch and introduce the right one in the next release.
Cc: Alexey Izbyshev <izbyshev@ispras.ru>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220913102551.1121611-3-avagin@google.com
This turns the IXP4xx GPIO irqchip into an immutable
irqchip, a bit different from the standard template due
to being hierarchical.
Tested on the IXP4xx which uses drivers/ata/pata_ixp4xx_cf.c
for a rootfs on compact flash with IRQs from this GPIO
block to the CF ATA controller.
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Pull iov_iter fix from Al Viro:
"Fix for a nfsd regression caused by the iov_iter stuff this window"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
nfsd_splice_actor(): handle compound pages
Before sending REQ_OP_ZONE_FINISH to a zone, we need to ensure that
ongoing IOs already finished. Or, we will see a "Zone Is Full" error for
the IOs, as the ZONE_FINISH command makes the zone full.
We ensure that with btrfs_wait_block_group_reservations() and
btrfs_wait_ordered_roots() for a data block group. And, for a metadata
block group, the comparison of alloc_offset vs meta_write_pointer mostly
ensures IOs for the allocated region already sent. However, there still
can be a little time frame where the IOs are sent but not yet completed.
Introduce wait_eb_writebacks() to ensure such IOs are completed for a
metadata block group. It walks the buffer_radix to find extent buffers in
the block group and calls wait_on_extent_buffer_writeback() on them.
Fixes: afba2bc036 ("btrfs: zoned: implement active zone tracking")
CC: stable@vger.kernel.org # 5.19+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Often when running generic/562 from fstests we can hang during unmount,
resulting in a trace like this:
Sep 07 11:52:00 debian9 unknown: run fstests generic/562 at 2022-09-07 11:52:00
Sep 07 11:55:32 debian9 kernel: INFO: task umount:49438 blocked for more than 120 seconds.
Sep 07 11:55:32 debian9 kernel: Not tainted 6.0.0-rc2-btrfs-next-122 #1
Sep 07 11:55:32 debian9 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Sep 07 11:55:32 debian9 kernel: task:umount state:D stack: 0 pid:49438 ppid: 25683 flags:0x00004000
Sep 07 11:55:32 debian9 kernel: Call Trace:
Sep 07 11:55:32 debian9 kernel: <TASK>
Sep 07 11:55:32 debian9 kernel: __schedule+0x3c8/0xec0
Sep 07 11:55:32 debian9 kernel: ? rcu_read_lock_sched_held+0x12/0x70
Sep 07 11:55:32 debian9 kernel: schedule+0x5d/0xf0
Sep 07 11:55:32 debian9 kernel: schedule_timeout+0xf1/0x130
Sep 07 11:55:32 debian9 kernel: ? lock_release+0x224/0x4a0
Sep 07 11:55:32 debian9 kernel: ? lock_acquired+0x1a0/0x420
Sep 07 11:55:32 debian9 kernel: ? trace_hardirqs_on+0x2c/0xd0
Sep 07 11:55:32 debian9 kernel: __wait_for_common+0xac/0x200
Sep 07 11:55:32 debian9 kernel: ? usleep_range_state+0xb0/0xb0
Sep 07 11:55:32 debian9 kernel: __flush_work+0x26d/0x530
Sep 07 11:55:32 debian9 kernel: ? flush_workqueue_prep_pwqs+0x140/0x140
Sep 07 11:55:32 debian9 kernel: ? trace_clock_local+0xc/0x30
Sep 07 11:55:32 debian9 kernel: __cancel_work_timer+0x11f/0x1b0
Sep 07 11:55:32 debian9 kernel: ? close_ctree+0x12b/0x5b3 [btrfs]
Sep 07 11:55:32 debian9 kernel: ? __trace_bputs+0x10b/0x170
Sep 07 11:55:32 debian9 kernel: close_ctree+0x152/0x5b3 [btrfs]
Sep 07 11:55:32 debian9 kernel: ? evict_inodes+0x166/0x1c0
Sep 07 11:55:32 debian9 kernel: generic_shutdown_super+0x71/0x120
Sep 07 11:55:32 debian9 kernel: kill_anon_super+0x14/0x30
Sep 07 11:55:32 debian9 kernel: btrfs_kill_super+0x12/0x20 [btrfs]
Sep 07 11:55:32 debian9 kernel: deactivate_locked_super+0x2e/0xa0
Sep 07 11:55:32 debian9 kernel: cleanup_mnt+0x100/0x160
Sep 07 11:55:32 debian9 kernel: task_work_run+0x59/0xa0
Sep 07 11:55:32 debian9 kernel: exit_to_user_mode_prepare+0x1a6/0x1b0
Sep 07 11:55:32 debian9 kernel: syscall_exit_to_user_mode+0x16/0x40
Sep 07 11:55:32 debian9 kernel: do_syscall_64+0x48/0x90
Sep 07 11:55:32 debian9 kernel: entry_SYSCALL_64_after_hwframe+0x63/0xcd
Sep 07 11:55:32 debian9 kernel: RIP: 0033:0x7fcde59a57a7
Sep 07 11:55:32 debian9 kernel: RSP: 002b:00007ffe914217c8 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
Sep 07 11:55:32 debian9 kernel: RAX: 0000000000000000 RBX: 00007fcde5ae8264 RCX: 00007fcde59a57a7
Sep 07 11:55:32 debian9 kernel: RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000055b57556cdd0
Sep 07 11:55:32 debian9 kernel: RBP: 000055b57556cba0 R08: 0000000000000000 R09: 00007ffe91420570
Sep 07 11:55:32 debian9 kernel: R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
Sep 07 11:55:32 debian9 kernel: R13: 000055b57556cdd0 R14: 000055b57556ccb8 R15: 0000000000000000
Sep 07 11:55:32 debian9 kernel: </TASK>
What happens is the following:
1) The cleaner kthread tries to start a transaction to delete an unused
block group, but the metadata reservation can not be satisfied right
away, so a reservation ticket is created and it starts the async
metadata reclaim task (fs_info->async_reclaim_work);
2) Writeback for all the filler inodes with an i_size of 2K starts
(generic/562 creates a lot of 2K files with the goal of filling
metadata space). We try to create an inline extent for them, but we
fail when trying to insert the inline extent with -ENOSPC (at
cow_file_range_inline()) - since this is not critical, we fallback
to non-inline mode (back to cow_file_range()), reserve extents, create
extent maps and create the ordered extents;
3) An unmount starts, enters close_ctree();
4) The async reclaim task is flushing stuff, entering the flush states one
by one, until it reaches RUN_DELAYED_IPUTS. There it runs all current
delayed iputs.
After running the delayed iputs and before calling
btrfs_wait_on_delayed_iputs(), one or more ordered extents complete,
and btrfs_add_delayed_iput() is called for each one through
btrfs_finish_ordered_io() -> btrfs_put_ordered_extent(). This results
in bumping fs_info->nr_delayed_iputs from 0 to some positive value.
So the async reclaim task blocks at btrfs_wait_on_delayed_iputs() waiting
for fs_info->nr_delayed_iputs to become 0;
5) The current transaction is committed by the transaction kthread, we then
start unpinning extents and end up calling btrfs_try_granting_tickets()
through unpin_extent_range(), since we released some space.
This results in satisfying the ticket created by the cleaner kthread at
step 1, waking up the cleaner kthread;
6) At close_ctree() we ask the cleaner kthread to park;
7) The cleaner kthread starts the transaction, deletes the unused block
group, and then calls kthread_should_park(), which returns true, so it
parks. And at this point we have the delayed iputs added by the
completion of the ordered extents still pending;
8) Then later at close_ctree(), when we call:
cancel_work_sync(&fs_info->async_reclaim_work);
We hang forever, since the cleaner was parked and no one else can run
delayed iputs after that, while the reclaim task is waiting for the
remaining delayed iputs to be completed.
Fix this by waiting for all ordered extents to complete and running the
delayed iputs before attempting to stop the async reclaim tasks. Note that
we can not wait for ordered extents with btrfs_wait_ordered_roots() (or
other similar functions) because that waits for the BTRFS_ORDERED_COMPLETE
flag to be set on an ordered extent, but the delayed iput is added after
that, when doing the final btrfs_put_ordered_extent(). So instead wait for
the work queues used for executing ordered extent completion to be empty,
which works because we do the final put on an ordered extent at
btrfs_finish_ordered_io() (while we are in the unmount context).
Fixes: d6fd0ae25c ("Btrfs: fix missing delayed iputs on unmount")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During early unmount, at close_ctree(), we try to stop the block group
reclaim task with cancel_work_sync(), but that may hang if the block group
reclaim task is currently at btrfs_relocate_block_group() waiting for the
flag BTRFS_FS_UNFINISHED_DROPS to be cleared from fs_info->flags. During
unmount we only clear that flag later, after trying to stop the block
group reclaim task.
Fix that by clearing BTRFS_FS_UNFINISHED_DROPS before trying to stop the
block group reclaim task and after setting BTRFS_FS_CLOSING_START, so that
if the reclaim task is waiting on that bit, it will stop immediately after
being woken, because it sees the filesystem is closing (with a call to
btrfs_fs_closing()), and then returns immediately with -EINTR.
Fixes: 31e70e5278 ("btrfs: fix hang during unmount when block group reclaim task is running")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This fixes two issues: I truncated the warning's hart ID when porting to
the 64-bit hart ID code, and the original code's warning handling could
fire on an uninitialized hart ID.
The biggest change here is that riscv_cbom_block_size is no longer
initialized, as IMO the default isn't sane: there's nothing in the ISA
that mandates any specific cache block size, so falling back to one will
just silently produce the wrong answer on some systems. This also
changes the probing order so the cache block size is known before
enabling Zicbom support.
CC: stable@vger.kernel.org
CC: Andrew Jones <ajones@ventanamicro.com>
CC: Heiko Stuebner <heiko@sntech.de>
CC: Atish Patra <atishp@rivosinc.com>
Fixes: 3aefb2ee5b ("riscv: implement Zicbom-based CMO instructions + the t-head variant")
Fixes: 1631ba1259 ("riscv: Add support for non-coherent devices using zicbom extension")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
[Conor: fixed the redefinition errors]
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220912224800.998121-1-mail@conchuod.ie
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The Aquantia datasheet notes that after issuing a Processor-Intensive
MDIO operation, like changing the low-power state of the device, the
driver should wait for the operation to finish before issuing a new MDIO
command.
The new aqr107_wait_processor_intensive_op() function is added which can
be used after these kind of MDIO operations. At the moment, we are only
adding it at the end of the suspend/resume calls.
The issue was identified on a board featuring the AQR113C PHY, on
which commands like 'ip link (..) up / down' issued without any delays
between them would render the link on the PHY to remain down.
The issue was easy to reproduce with a one-liner:
$ ip link set dev ethX down; ip link set dev ethX up; \
ip link set dev ethX down; ip link set dev ethX up;
Fixes: ac9e81c230 ("net: phy: aquantia: add suspend / resume callbacks for AQR107 family")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220906130451.1483448-1-ioana.ciornei@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
pipe_buffer might refer to a compound page (and contain more than a PAGE_SIZE
worth of data). Theoretically it had been possible since way back, but
nfsd_splice_actor() hadn't run into that until copy_page_to_iter() change.
Fortunately, the only thing that changes for compound pages is that we
need to stuff each relevant subpage in and convert the offset into offset
in the first subpage.
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: f0f6b614f8 "copy_page_to_iter(): don't split high-order page in case of ITER_PIPE"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The CPU uplink port on the KSZ9477 is P5 not P6 - fix this.
Fixes: 7899eb6cb1 ("arm64: dts: imx: Add i.MX8M Plus Gateworks gw7400 dts support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The CAN STBY poarlity is active-low. Specify it as such by removing the
'enable-active-high' property and updating the gpio property.
Fixes: 7899eb6cb1 ("arm64: dts: imx: Add i.MX8M Plus Gateworks gw7400 dts support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pull hyperv fixes from Wei Liu:
- Fix an error handling issue in DRM driver (Christophe JAILLET)
- Fix some issues in framebuffer driver (Vitaly Kuznetsov)
- Two typo fixes (Jason Wang, Shaomin Deng)
- Drop unnecessary casting in kvp tool (Zhou Jie)
* tag 'hyperv-fixes-signed-20220912' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: Never allocate anything besides framebuffer from framebuffer memory region
Drivers: hv: Always reserve framebuffer region for Gen1 VMs
PCI: Move PCI_VENDOR_ID_MICROSOFT/PCI_DEVICE_ID_HYPERV_VIDEO definitions to pci_ids.h
tools: hv: kvp: remove unnecessary (void*) conversions
Drivers: hv: remove duplicate word in a comment
tools: hv: Remove an extraneous "the"
drm/hyperv: Fix an error handling path in hyperv_vmbus_probe()
Pull NFS client bugfixes from Trond Myklebust:
- Fix SUNRPC call completion races with call_decode() that trigger a
WARN_ON()
- NFSv4.0 cannot support open-by-filehandle and NFS re-export
- Revert "SUNRPC: Remove unreachable error condition" to allow handling
of error conditions
- Update suid/sgid mode bits after ALLOCATE and DEALLOCATE
* tag 'nfs-for-5.20-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
Revert "SUNRPC: Remove unreachable error condition"
NFSv4.2: Update mode bits after ALLOCATE and DEALLOCATE
NFSv4: Turn off open-by-filehandle and NFS re-export for NFSv4.0
SUNRPC: Fix call completion races with call_decode()
Pull nfsd fix from Chuck Lever:
"Address an NFSD regression introduced during the 6.0 merge window"
* tag 'nfsd-6.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: fix regression with setting ACLs.
Kernel bugzilla: 216301
When doing direct writes we need to also invalidate the mapping in case
we have a cached copy of the affected page(s) in memory or else
subsequent reads of the data might return the old/stale content
before we wrote an update to the server.
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
LoongArch irqchips have a fixed hierarchy which currently can't be
described by ACPI tables, so upstream irqchip drivers call downstream
irqchip drivers' initialization directly. As a result, the top level
(CPU-level) irqchip driver should explicitly select downstream drivers
to avoid build errors.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220808085319.3350111-1-chenhuacai@loongson.cn
Running a PREEMPT_RT kernel based on v5.19-rc3-rt4 on an Ampere Altra
triggers:
[ 22.616229] BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46
[ 22.616239] in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 1884, name: kworker/80:1
[ 22.616243] preempt_count: 3, expected: 0
[ 22.616244] RCU nest depth: 0, expected: 0
[...]
[ 22.616250] hardirqs last enabled at (33): _raw_spin_unlock_irq (/home/piegon01/linux/./arch/arm64/include/asm/irqflags.h:35)
[ 22.616273] hardirqs last disabled at (34): __schedule (/home/piegon01/linux/kernel/sched/core.c:6432 (discriminator 1))
[ 22.616283] softirqs last enabled at (0): copy_process (/home/piegon01/linux/./include/linux/lockdep.h:191)
[ 22.616297] softirqs last disabled at (0): 0x0
[ 22.616305] Preemption disabled at:
[ 22.616307] __setup_irq (/home/piegon01/linux/kernel/irq/manage.c:1612)
[ 22.616322] CPU: 80 PID: 1884 Comm: kworker/80:1 Tainted: G W [...]
[ 22.616328] Hardware name: WIWYNN Mt.Jade Server System B81.03001.0005/Mt.Jade Motherboard, BIOS 1.08.20220218 (SCP: 1.08.20220218) 2022/02/18
[ 22.616333] Workqueue: events work_for_cpu_fn
[ 22.616344] Call trace:
[...]
[ 22.616403] alloc_cpumask_var_node (/home/piegon01/linux/lib/cpumask.c:115)
[ 22.616414] alloc_cpumask_var (/home/piegon01/linux/lib/cpumask.c:147)
[ 22.616417] its_select_cpu (/home/piegon01/linux/drivers/irqchip/irq-gic-v3-its.c:1580)
[ 22.616428] its_set_affinity (/home/piegon01/linux/drivers/irqchip/irq-gic-v3-its.c:1659)
[ 22.616431] msi_domain_set_affinity (/home/piegon01/linux/kernel/irq/msi.c:501)
[ 22.616440] irq_do_set_affinity (/home/piegon01/linux/kernel/irq/manage.c:276)
[ 22.616443] irq_setup_affinity (/home/piegon01/linux/kernel/irq/manage.c:633)
[ 22.616447] irq_startup (/home/piegon01/linux/kernel/irq/chip.c:280)
[ 22.616453] __setup_irq (/home/piegon01/linux/kernel/irq/manage.c:1777)
Follow the pattern established in commit cba4235e60 ("genirq: Remove
mask argument from setup_affinity()") and co to overcome this issue by
defining a static struct cpumask and protecting it by a raw spinlock.
Since its_select_cpu() can be executed with IRQs enabled or disabled,
enforce that the cpumask computation is done with interrupts disabled.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220912141857.1391343-1-pierre.gondois@arm.com
Drop some not-specified properties, fix phy-supply properties,
fix edp clock on Gru, fix usb port on BPI-R2-Pro, fix license typo,
fix wlan-wake-pin on Gru-Bob and lower the sd-card speed on Quartz64-B
* tag 'v6.0-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Remove 'enable-active-low' from rk3566-quartz64-a
arm64: dts: rockchip: Remove 'enable-active-low' from rk3399-puma
arm64: dts: rockchip: fix property for usb2 phy supply on rk3568-evb1-v10
arm64: dts: rockchip: fix property for usb2 phy supply on rock-3a
arm64: dts: rockchip: Set RK3399-Gru PCLK_EDP to 24 MHz
arm64: dts: rockchip: fix upper usb port on BPI-R2-Pro
arm64: dts: rockchip: Fix typo in lisense text for PX30.Core
arm64: dts: rockchip: Pull up wlan wake# on Gru-Bob
arm64: dts: rockchip: Lower sd speed on quartz64-b
Link: https://lore.kernel.org/r/2645885.mvXUDI8C0e@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
imx8mm-tqma8mqml.dtsi has PCIe support, so it should include
<dt-bindings/phy/phy-imx8-pcie.h>.
Otherwise, there are build errors when this SoM dtsi is included
on customers' carrier boards.
While at it, remove the PCI header from imx8mm-tqma8mqml-mba8mx.dts,
which is now unneeded.
Fixes: 1d84283101 ("arm64: dts: tqma8mqml: add PCIe support")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The iwlmei driver breaks iwlwifi when returning from suspend. The interface
ends up in the 'down' state after coming back from suspend. And iwd doesn't
touch the interface state, but wpa_supplicant does, so the bug only happens on
iwd.
The bug report[0] has been open for four months now, and no fix seems to be
forthcoming. Since just disabling the iwlmei driver works as a workaround,
let's mark the config option as broken until it can be fixed properly.
[0] https://bugzilla.kernel.org/show_bug.cgi?id=215937
Fixes: 2da4366f9e ("iwlwifi: mei: add the driver to allow cooperation with CSME")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220907134450.1183045-1-toke@toke.dk
Commit 566e373fe0 ("arm64: Kconfig.platforms: Group NXP platforms
together") introduced a new symbol ARCH_NXP and made ARCH_LAYERSCAPE
(among others) depend on it, but didn't enable it in the defconfig.
Thus, now the defconfig doesn't include support for any NXP
architectures anymore. Fix it.
Fixes: 566e373fe0 ("arm64: Kconfig.platforms: Group NXP platforms together")
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Although the RTC is on the module, the RTC_EVENT# signal is connected
on the mainboard. Already set by bootloader, but make it explicit in Linux
as well.
Fixes: 418d1d840e ("arm64: dts: freescale: add initial device tree for TQMa8MPQL with i.MX8MP")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
migrate_vma_setup() has a fast path in migrate_vma_collect_pmd() that
installs migration entries directly if it can lock the migrating page.
When removing a dirty pte the dirty bit is supposed to be carried over to
the underlying page to prevent it being lost.
Currently migrate_vma_*() can only be used for private anonymous mappings.
That means loss of the dirty bit usually doesn't result in data loss
because these pages are typically not file-backed. However pages may be
backed by swap storage which can result in data loss if an attempt is made
to migrate a dirty page that doesn't yet have the PageDirty flag set.
In this case migration will fail due to unexpected references but the
dirty pte bit will be lost. If the page is subsequently reclaimed data
won't be written back to swap storage as it is considered uptodate,
resulting in data loss if the page is subsequently accessed.
Prevent this by copying the dirty bit to the page when removing the pte to
match what try_to_migrate_one() does.
Link: https://lkml.kernel.org/r/dd48e4882ce859c295c1a77612f66d198b0403f9.1662078528.git-series.apopple@nvidia.com
Fixes: 8c3328f1f3 ("mm/migrate: migrate_vma() unmap page from vma while collecting pages")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Reported-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Alex Sierra <alex.sierra@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: huang ying <huang.ying.caritas@gmail.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In the case where a filesystem is polled to take over the memory failure
and receives -EOPNOTSUPP it indicates that page->index and page->mapping
are valid for reverse mapping the failure address. Introduce
FSDAX_INVALID_PGOFF to distinguish when add_to_kill() is being called from
mf_dax_kill_procs() by a filesytem vs the typical memory_failure() path.
Otherwise, vma_pgoff_address() is called with an invalid fsdax_pgoff which
then trips this failing signature:
kernel BUG at mm/memory-failure.c:319!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
CPU: 13 PID: 1262 Comm: dax-pmd Tainted: G OE N 6.0.0-rc2+ #62
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:add_to_kill.cold+0x19d/0x209
[..]
Call Trace:
<TASK>
collect_procs.part.0+0x2c4/0x460
memory_failure+0x71b/0xba0
? _printk+0x58/0x73
do_madvise.part.0.cold+0xaf/0xc5
Link: https://lkml.kernel.org/r/166153429427.2758201.14605968329933175594.stgit@dwillia2-xfh.jf.intel.com
Fixes: c36e202495 ("mm: introduce mf_dax_kill_procs() for fsdax case")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm, xfs, dax: Fixes for memory_failure() handling".
I failed to run the memory error injection section of the ndctl test suite
on linux-next prior to the merge window and as a result some bugs were
missed. While the new enabling targeted reflink enabled XFS filesystems
the bugs cropped up in the surrounding cases of DAX error injection on
ext4-fsdax and device-dax.
One new assumption / clarification in this set is the notion that if a
filesystem's ->notify_failure() handler returns -EOPNOTSUPP, then it must
be the case that the fsdax usage of page->index and page->mapping are
valid. I am fairly certain this is true for xfs_dax_notify_failure(), but
would appreciate another set of eyes.
This patch (of 4):
XFS always registers dax_holder_operations regardless of whether the
filesystem is capable of handling the notifications. The expectation is
that if the notify_failure handler cannot run then there are no scenarios
where it needs to run. In other words the expected semantic is that
page->index and page->mapping are valid for memory_failure() when the
conditions that cause -EOPNOTSUPP in xfs_dax_notify_failure() are present.
A fallback to the generic memory_failure() path is expected so do not warn
when that happens.
Link: https://lkml.kernel.org/r/166153426798.2758201.15108211981034512993.stgit@dwillia2-xfh.jf.intel.com
Link: https://lkml.kernel.org/r/166153427440.2758201.6709480562966161512.stgit@dwillia2-xfh.jf.intel.com
Fixes: 6f643c57d5 ("xfs: implement ->notify_failure() for XFS")
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Goldwyn Rodrigues <rgoldwyn@suse.de>
Cc: Jane Chu <jane.chu@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patrick Daly reported the following problem;
NODE_DATA(nid)->node_zonelists[ZONELIST_FALLBACK] - before offline operation
[0] - ZONE_MOVABLE
[1] - ZONE_NORMAL
[2] - NULL
For a GFP_KERNEL allocation, alloc_pages_slowpath() will save the
offset of ZONE_NORMAL in ac->preferred_zoneref. If a concurrent
memory_offline operation removes the last page from ZONE_MOVABLE,
build_all_zonelists() & build_zonerefs_node() will update
node_zonelists as shown below. Only populated zones are added.
NODE_DATA(nid)->node_zonelists[ZONELIST_FALLBACK] - after offline operation
[0] - ZONE_NORMAL
[1] - NULL
[2] - NULL
The race is simple -- page allocation could be in progress when a memory
hot-remove operation triggers a zonelist rebuild that removes zones. The
allocation request will still have a valid ac->preferred_zoneref that is
now pointing to NULL and triggers an OOM kill.
This problem probably always existed but may be slightly easier to trigger
due to 6aa303defb ("mm, vmscan: only allocate and reclaim from zones
with pages managed by the buddy allocator") which distinguishes between
zones that are completely unpopulated versus zones that have valid pages
not managed by the buddy allocator (e.g. reserved, memblock, ballooning
etc). Memory hotplug had multiple stages with timing considerations
around managed/present page updates, the zonelist rebuild and the zone
span updates. As David Hildenbrand puts it
memory offlining adjusts managed+present pages of the zone
essentially in one go. If after the adjustments, the zone is no
longer populated (present==0), we rebuild the zone lists.
Once that's done, we try shrinking the zone (start+spanned
pages) -- which results in zone_start_pfn == 0 if there are no
more pages. That happens *after* rebuilding the zonelists via
remove_pfn_range_from_zone().
The only requirement to fix the race is that a page allocation request
identifies when a zonelist rebuild has happened since the allocation
request started and no page has yet been allocated. Use a seqlock_t to
track zonelist updates with a lockless read-side of the zonelist and
protecting the rebuild and update of the counter with a spinlock.
[akpm@linux-foundation.org: make zonelist_update_seq static]
Link: https://lkml.kernel.org/r/20220824110900.vh674ltxmzb3proq@techsingularity.net
Fixes: 6aa303defb ("mm, vmscan: only allocate and reclaim from zones with pages managed by the buddy allocator")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Patrick Daly <quic_pdaly@quicinc.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org> [4.9+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We fixed the potential deadlock at dynamic unbinding the HD-audio
codec at the commit 7206998f57 ("ALSA: hda: Fix potential deadlock
at codec unbinding"), but ironically, this caused another potential
deadlock. The current code uses refcount_dec() and waits for the
pending task with wait_event for dropping the refcount to 0. This
works fine when PCMs are assigned and actually waiting for the
refcount drop.
Meanwhile, when there was no PCM assigned, the refcount_dec() call
itself was supposed to drop to zero -- alas, it doesn't in reality;
refcount_dec() complains, spews kernel warning and it saturates
instead of dropping to 0, due to the nature of refcount_dec()
implementation. This eventually blocks the wait_event() wakeup and
the code get stuck there.
For avoiding the problem, we call refcount_dec_and_test() and skips
the sync-wait if it already reaches to zero.
The patch does a slight code reshuffling to make sure to invoke other
disconnect calls before the sync-wait, too.
Fixes: 7206998f57 ("ALSA: hda: Fix potential deadlock at codec unbinding")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/YxtflWQnslMHVlU7@intel.com
Link: https://lore.kernel.org/r/20220910142550.28494-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Recent changes breaks HCIGETDEVINFO since it changes the size of
hci_dev_info.
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix gnome-shell (and other page-flip users) hanging after suspend/resume
because of the gma500's IRQs not working.
This fixes 2 problems with the IRQ handling:
1. gma_power_off() calls gma_irq_uninstall() which does a free_irq(), but
gma_power_on() called gma_irq_preinstall() + gma_irq_postinstall() which
do not call request_irq. Replace the pre- + post-install calls with
gma_irq_install() which does prep + request + post.
2. After fixing 1. IRQs still do not work on a Packard Bell Dot SC (Intel
Atom N2600, cedarview) netbook.
Cederview uses MSI interrupts and it seems that the BIOS re-configures
things back to normal APIC based interrupts during S3 suspend. There is
some MSI PCI-config registers save/restore code which tries to deal with
this, but on the Packard Bell Dot SC this is not sufficient to restore
MSI IRQ functionality after a suspend/resume.
Replace the PCI-config registers save/restore with pci_disable_msi() on
suspend + pci_enable_msi() on resume. Fixing e.g. gnome-shell hanging.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906203852.527663-4-hdegoede@redhat.com
__flow_hash_consistentify() wrongly swaps ipv4 addresses in few cases.
This function is indirectly used by __skb_get_hash_symmetric(), which is
used to fanout packets in AF_PACKET.
Intrusion detection systems may be impacted by this issue.
__flow_hash_consistentify() computes the addresses difference then swaps
them if the difference is negative. In few cases src - dst and dst - src
are both negative.
The following snippet mimics __flow_hash_consistentify():
```
#include <stdio.h>
#include <stdint.h>
int main(int argc, char** argv) {
int diffs_d, diffd_s;
uint32_t dst = 0xb225a8c0; /* 178.37.168.192 --> 192.168.37.178 */
uint32_t src = 0x3225a8c0; /* 50.37.168.192 --> 192.168.37.50 */
uint32_t dst2 = 0x3325a8c0; /* 51.37.168.192 --> 192.168.37.51 */
diffs_d = src - dst;
diffd_s = dst - src;
printf("src:%08x dst:%08x, diff(s-d)=%d(0x%x) diff(d-s)=%d(0x%x)\n",
src, dst, diffs_d, diffs_d, diffd_s, diffd_s);
diffs_d = src - dst2;
diffd_s = dst2 - src;
printf("src:%08x dst:%08x, diff(s-d)=%d(0x%x) diff(d-s)=%d(0x%x)\n",
src, dst2, diffs_d, diffs_d, diffd_s, diffd_s);
return 0;
}
```
Results:
src:3225a8c0 dst:b225a8c0, \
diff(s-d)=-2147483648(0x80000000) \
diff(d-s)=-2147483648(0x80000000)
src:3225a8c0 dst:3325a8c0, \
diff(s-d)=-16777216(0xff000000) \
diff(d-s)=16777216(0x1000000)
In the first case the addresses differences are always < 0, therefore
__flow_hash_consistentify() always swaps, thus dst->src and src->dst
packets have differents hashes.
Fixes: c3f8324188 ("net: Add full IPv6 addresses to flow_keys")
Signed-off-by: Ludovic Cintrat <ludovic.cintrat@gatewatcher.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If an AF_PACKET socket is used to send packets through ipvlan and the
default xmit function of the AF_PACKET socket is changed from
dev_queue_xmit() to packet_direct_xmit() via setsockopt() with the option
name of PACKET_QDISC_BYPASS, the skb->mac_header may not be reset and
remains as the initial value of 65535, this may trigger slab-out-of-bounds
bugs as following:
=================================================================
UG: KASAN: slab-out-of-bounds in ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan]
PU: 2 PID: 1768 Comm: raw_send Kdump: loaded Not tainted 6.0.0-rc4+ #6
ardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33
all Trace:
print_address_description.constprop.0+0x1d/0x160
print_report.cold+0x4f/0x112
kasan_report+0xa3/0x130
ipvlan_xmit_mode_l2+0xdb/0x330 [ipvlan]
ipvlan_start_xmit+0x29/0xa0 [ipvlan]
__dev_direct_xmit+0x2e2/0x380
packet_direct_xmit+0x22/0x60
packet_snd+0x7c9/0xc40
sock_sendmsg+0x9a/0xa0
__sys_sendto+0x18a/0x230
__x64_sys_sendto+0x74/0x90
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The root cause is:
1. packet_snd() only reset skb->mac_header when sock->type is SOCK_RAW
and skb->protocol is not specified as in packet_parse_headers()
2. packet_direct_xmit() doesn't reset skb->mac_header as dev_queue_xmit()
In this case, skb->mac_header is 65535 when ipvlan_xmit_mode_l2() is
called. So when ipvlan_xmit_mode_l2() gets mac header with eth_hdr() which
use "skb->head + skb->mac_header", out-of-bound access occurs.
This patch replaces eth_hdr() with skb_eth_hdr() in ipvlan_xmit_mode_l2()
and reset mac header in multicast to solve this out-of-bound bug.
Fixes: 2ad7bf3638 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: Lu Wei <luwei32@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
VPP_WRAP_OSD1_MATRIX_COEF22.Coeff22 is documented as being bits 0-12,
not 16-28.
Without this the output tends to have a pink hue, changing it results
in better color accuracy.
The vendor kernel doesn't use this register. However the code which
sets VIU2_OSD1_MATRIX_COEF22 also uses bits 0-12. There is a slightly
different style of registers for configuring some of the other matrices,
which do use bits 16-28 for this coefficient, but those have names
ending in MATRIX_COEF22_30, and this is not one of those.
Signed-off-by: Stuart Menefy <stuart.menefy@mathembedded.com>
Fixes: 728883948b ("drm/meson: Add G12A Support for VIU setup")
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908155243.687143-1-stuart.menefy@mathembedded.com
Florian Westhal says:
====================
netfilter: bugfixes for net
The following set contains four netfilter patches for your *net* tree.
When there are multiple Contact headers in a SIP message its possible
the next headers won't be found because the SIP helper confuses relative
and absolute offsets in the message. From Igor Ryzhov.
Make the nft_concat_range self-test support socat, this makes the
selftest pass on my test VM, from myself.
nf_conntrack_irc helper can be tricked into opening a local port forward
that the client never requested by embedding a DCC message in a PING
request sent to the client. Fix from David Leadbeater.
Both have been broken since the kernel 2.6.x days.
The 'osf' match might indicate success while it could not find
anything, broken since 5.2 . Fix from Pablo Neira.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for Maple Ridge discrete USB4 host controller from Intel
which has a single USB4 port (versus the already supported dual port
Maple Ridge USB4 host controller).
Cc: stable@vger.kernel.org
Signed-off-by: Gil Fine <gil.fine@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
A recent patch moved ACL setting into nfsd_setattr().
Unfortunately it didn't work as nfsd_setattr() aborts early if
iap->ia_valid is 0.
Remove this test, and instead avoid calling notify_change() when
ia_valid is 0.
This means that nfsd_setattr() will now *always* lock the inode.
Previously it didn't if only a ATTR_MODE change was requested on a
symlink (see Commit 15b7a1b86d ("[PATCH] knfsd: fix setattr-on-symlink
error return")). I don't think this change really matters.
Fixes: c0cbe70742 ("NFSD: add posix ACLs to struct nfsd_attrs")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Errors from debugfs are intended to be non-fatal, and should not prevent
the driver from probing.
Since debugfs file creation is treated as infallible, move it below the
parts of the probe function that can fail. This prevents an error
elsewhere in the probe function from causing the file to leak. Do the
same for the call to of_platform_populate().
Finally, checkpatch suggests an octal literal for the file permissions.
Fixes: 4af34b572a ("drivers: soc: sunxi: Introduce SoC driver to map SRAMs")
Fixes: 5828729beb ("soc: sunxi: export a regmap for EMAC clock reg on A64")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Samuel Holland <samuel@sholland.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220815041248.53268-6-samuel@sholland.org
Previously changing mac address gives false negative because
ip link set <interface> address <MAC> return with
RTNLINK: Permission denied.
In iavf_set_mac was check if PF handled our mac set request,
even before filter was added to list.
Because this check returns always true and it never waits for
PF's response.
Move iavf_is_mac_handled to wait_event_interruptible_timeout
instead of false. Now it will wait for PF's response and then
check if address was added or rejected.
Fixes: 35a2443d09 ("iavf: Add waiting for response from PF in set mac")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Co-developed-by: Norbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Commit 52824ca450 ("drm/panel-edp: Better describe eDP panel delays")
clarified the various delays used for eDP panels, tying them to the eDP
panel timing diagram.
For Innolux N116BCA-EA1, .prepare_to_enable would be:
t4_min + t5_min + t6_min + max(t7_max, t8_min)
Since t4_min and t5_min are both 0, the panel can use either .enable or
.prepare_to_enable.
As .enable is better defined, switch to using .enable for this panel.
Also add .disable = 50, based on the datasheet's t9_min value. This
effectively makes the delays the same as delay_200_500_e80_d50.
Cc: Douglas Anderson <dianders@chromium.org>
Fixes: 51d35631c9 ("drm/panel-simple: Add N116BCA-EA1")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908085454.1024167-1-wenst@chromium.org
This reverts commit efe57fd58e.
The assumption that it is impossible to return an ERR pointer from
rpc_run_task() no longer holds due to commit 25cf32ad5d ("SUNRPC:
Handle allocation failure in rpc_new_task()").
Fixes: 25cf32ad5d ('SUNRPC: Handle allocation failure in rpc_new_task()')
Fixes: efe57fd58e ('SUNRPC: Remove unreachable error condition')
Signed-off-by: Dan Aloni <dan.aloni@vastdata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
The fallocate call invalidates suid and sgid bits as part of normal
operation. We need to mark the mode bits as invalid when using fallocate
with an suid so these will be updated the next time the user looks at them.
This fixes xfstests generic/683 and generic/684.
Reported-by: Yue Cui <cuiyue-fnst@fujitsu.com>
Fixes: 913eca1aea ("NFS: Fallocate should use the nfs4_fattr_bitmap")
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Driver moxart-mmc.c has .compatible = "moxa,moxart-mmc".
But moxart .dts/.dtsi and the documentation file moxa,moxart-dma.txt
contain compatible = "moxa,moxart-sdhci".
Change moxart .dts/.dtsi files and moxa,moxart-dma.txt to match the driver.
Replace 'sdhci' with 'mmc' in names too, since SDHCI is a different
controller from FTSDC010.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sergei Antonov <saproj@gmail.com>
Cc: Jonas Jensen <jonas.jensen@gmail.com>
Link: https://lore.kernel.org/r/20220907175341.1477383-1-saproj@gmail.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arm SCMI fixes for v6.0
Few fixes addressing possible out of bound access violations by
hardening them, incorrect asynchronous resets by restricting them,
incorrect SCMI tracing message format by harmonizing them, missing
kernel-doc in optee transport, missing SCMI PM driver remove
routine by adding it to avoid warning when scmi driver is unloaded
and finally improve checks in the info_get operations.
* tag 'scmi-fixes-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Harmonize SCMI tracing message format
firmware: arm_scmi: Add SCMI PM driver remove routine
firmware: arm_scmi: Fix the asynchronous reset requests
firmware: arm_scmi: Harden accesses to the reset domains
firmware: arm_scmi: Harden accesses to the sensor domains
firmware: arm_scmi: Improve checks in the info_get operations
firmware: arm_scmi: Fix missing kernel-doc in optee
Link: https://lore.kernel.org/r/20220829174435.207911-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On some DWC3 controllers (e.g. Rockchip SoCs), the DWC3 core
doesn't support 64-bit DMA address width. In this case, this
driver should use the default 32-bit mask. Otherwise, the DWC3
controller will break if it runs on above 4GB physical memory
environment.
This patch reads the DWC_USB3_AWIDTH bits of GHWPARAMS0 which
used for the DMA address width, and only configure 64-bit DMA
mask if the DWC_USB3_AWIDTH is 64.
Fixes: 45d39448b4 ("usb: dwc3: support 64 bit DMA in platform driver")
Cc: stable <stable@kernel.org>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: William Wu <william.wu@rock-chips.com>
Link: https://lore.kernel.org/r/20220901083446.3799754-1-william.wu@rock-chips.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
nf_osf_find() incorrectly returns true on mismatch, this leads to
copying uninitialized memory area in nft_osf which can be used to leak
stale kernel stack data to userspace.
Fixes: 22c7652cda ("netfilter: nft_osf: Add version option support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
CTCP messages should only be at the start of an IRC message, not
anywhere within it.
While the helper only decodes packes in the ORIGINAL direction, its
possible to make a client send a CTCP message back by empedding one into
a PING request. As-is, thats enough to make the helper believe that it
saw a CTCP message.
Fixes: 869f37d8e4 ("[NETFILTER]: nf_conntrack/nf_nat: add IRC helper port")
Signed-off-by: David Leadbeater <dgl@dgl.cx>
Signed-off-by: Florian Westphal <fw@strlen.de>
There are different flavors of 'nc' around, this script fails on
my test vm because 'nc' is 'nmap-ncat' which isn't 100% compatible.
Add socat support and use it if available.
Signed-off-by: Florian Westphal <fw@strlen.de>
ct_sip_next_header and ct_sip_get_header return an absolute
value of matchoff, not a shift from current dataoff.
So dataoff should be assigned matchoff, not incremented by it.
This issue can be seen in the scenario when there are multiple
Contact headers and the first one is using a hostname and other headers
use IP addresses. In this case, ct_sip_walk_headers will work as follows:
The first ct_sip_get_header call to will find the first Contact header
but will return -1 as the header uses a hostname. But matchoff will
be changed to the offset of this header. After that, dataoff should be
set to matchoff, so that the next ct_sip_get_header call find the next
Contact header. But instead of assigning dataoff to matchoff, it is
incremented by it, which is not correct, as matchoff is an absolute
value of the offset. So on the next call to the ct_sip_get_header,
dataoff will be incorrect, and the next Contact header may not be
found at all.
Fixes: 05e3ced297 ("[NETFILTER]: nf_conntrack_sip: introduce SIP-URI parsing helper")
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Commit e39d5ef678 ("powerpc/5xxx: extend mpc8xxx_gpio driver to support
mpc512x gpios") implemented support for IRQ_TYPE_LEVEL_LOW flow type in
mpc512x via falling edge type. Do same for mpc85xx which support was added
in commit 345e5c8a1c ("powerpc: Add interrupt support to mpc8xxx_gpio").
Fixes probing of lm90 hwmon driver on mpc85xx based board which use level
interrupt. Without it kernel prints error and refuse lm90 to work:
[ 15.258370] genirq: Setting trigger mode 8 for irq 49 failed (mpc8xxx_irq_set_type+0x0/0xf8)
[ 15.267168] lm90 0-004c: cannot request IRQ 49
[ 15.272708] lm90: probe of 0-004c failed with error -22
Fixes: 345e5c8a1c ("powerpc: Add interrupt support to mpc8xxx_gpio")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Vinod writes:
"phy: fixes for 6.0
Fix for broken reset in marvell a3700-comphy"
* tag 'phy-fixes-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: marvell: phy-mvebu-a3700-comphy: Remove broken reset support
I get a log line like this every 4 seconds when connected to my AP:
[15650.221468] iwlwifi 0000:09:00.0: Got NSS = 4 - trimming to 2
Looking at the code, this seems to be related to a hardware limitation,
and there's nothing to be done. In an effort to keep my dmesg
manageable, downgrade this error to "debug" rather than "info".
Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220905172246.105383-1-Jason@zx2c4.com
Waiman has been very active with cpuset recently and I've been cc'ing him
for cpuset related changes for a while now. Let's make him a cpuset
maintainer.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Waiman Long <longman@redhat.com>
perf_output_read_group may respond to IPI request of other cores and invoke
__perf_install_in_context function. As a result, hwc configuration is modified.
causing inconsistency and unexpected consequences.
Interrupts are not disabled when perf_output_read_group reads PMU counter.
In this case, IPI request may be received from other cores.
As a result, PMU configuration is modified and an error occurs when
reading PMU counter:
CPU0 CPU1
__se_sys_perf_event_open
perf_install_in_context
perf_output_read_group smp_call_function_single
for_each_sibling_event(sub, leader) { generic_exec_single
if ((sub != event) && remote_function
(sub->state == PERF_EVENT_STATE_ACTIVE)) |
<enter IPI handler: __perf_install_in_context> <----RAISE IPI-----+
__perf_install_in_context
ctx_resched
event_sched_out
armpmu_del
...
hwc->idx = -1; // event->hwc.idx is set to -1
...
<exit IPI>
sub->pmu->read(sub);
armpmu_read
armv8pmu_read_counter
armv8pmu_read_hw_counter
int idx = event->hw.idx; // idx = -1
u64 val = armv8pmu_read_evcntr(idx);
u32 counter = ARMV8_IDX_TO_COUNTER(idx); // invalid counter = 30
read_pmevcntrn(counter) // undefined instruction
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220902082918.179248-1-yangjihong1@huawei.com
Commit bcbb63b802 ("ARM: dts: dra7: Separate AM57 dtsi files")
disabled usb4_tm for am5748 devices since USB4 IP is not present
in this SoC.
The commit log explained the difference between AM5 and DRA7 families:
AM5 and DRA7 SoC families have different set of modules in them so the
SoC sepecific dtsi files need to be separated.
e.g. Some of the major differences between AM576 and DRA76
DRA76x AM576x
USB3 x
USB4 x
ATL x
VCP x
MLB x
ISS x
PRU-ICSS1 x
PRU-ICSS2 x
Then commit 176f26bcd4 ("ARM: dts: Add support for dra762 abz
package") removed usb4_tm part from am5748.dtsi and introcuded new
ti-sysc errors in dmesg:
ti-sysc 48940000.target-module: clock get error for fck: -2
ti-sysc: probe of 48940000.target-module failed with error -2
Fixes: 176f26bcd4 ("ARM: dts: Add support for dra762 abz package")
Signed-off-by: Romain Naour <romain.naour@skf.com>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Message-Id: <20220823072742.351368-1-romain.naour@smile.fr>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Currently, we limited the voltages from the PMIC very strictly. This
causes an issue with one Toradex SKU that uses a consumer-grade chip
that is capable of going up to 1.8GHz at 1.00V.
Extend the ranges to min/max values of the SoC operating ranges (table
10) in the datasheet. Detailed explanation as follows:
BUCK2:
- As already described above, the SKU with the consumer-grade chip
needs a voltage of at least 1.00V. 1.05V is chosen now as this is
listed as the maximum. Both industrial and consumer-grade chips have
an absolute maximum rating of 1.15V which makes it still safe to put
1.05V
- Lower the regulator-min value to the smallest value allowed from the
Quad-A53, 1.2GHz version of the SoC
BUCK3:
- This regulator is used for SoC input voltages VDD_GPU, VDD_VPU and
VDD_DRAM.
- Use the smallest value of these three inputs as the regulator-min
- Use the largest value of these three inputs as the regulator-max
LDO2:
- This LDO is used for VDD_SNVS_0P8 SoC input voltage. As this has a
single nominal input voltage just put this in the middle of 0.8V.
Fixes: 6a57f224f7 ("arm64: dts: freescale: add initial support for verdin imx8m mini")
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Passed through PCI device sometimes misbehave on Gen1 VMs when Hyper-V
DRM driver is also loaded. Looking at IOMEM assignment, we can see e.g.
$ cat /proc/iomem
...
f8000000-fffbffff : PCI Bus 0000:00
f8000000-fbffffff : 0000:00:08.0
f8000000-f8001fff : bb8c4f33-2ba2-4808-9f7f-02f3b4da22fe
...
fe0000000-fffffffff : PCI Bus 0000:00
fe0000000-fe07fffff : bb8c4f33-2ba2-4808-9f7f-02f3b4da22fe
fe0000000-fe07fffff : 2ba2:00:02.0
fe0000000-fe07fffff : mlx4_core
the interesting part is the 'f8000000' region as it is actually the
VM's framebuffer:
$ lspci -v
...
0000:00:08.0 VGA compatible controller: Microsoft Corporation Hyper-V virtual VGA (prog-if 00 [VGA controller])
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
...
hv_vmbus: registering driver hyperv_drm
hyperv_drm 5620e0c7-8062-4dce-aeb7-520c7ef76171: [drm] Synthvid Version major 3, minor 5
hyperv_drm 0000:00:08.0: vgaarb: deactivate vga console
hyperv_drm 0000:00:08.0: BAR 0: can't reserve [mem 0xf8000000-0xfbffffff]
hyperv_drm 5620e0c7-8062-4dce-aeb7-520c7ef76171: [drm] Cannot request framebuffer, boot fb still active?
Note: "Cannot request framebuffer" is not a fatal error in
hyperv_setup_gen1() as the code assumes there's some other framebuffer
device there but we actually have some other PCI device (mlx4 in this
case) config space there!
The problem appears to be that vmbus_allocate_mmio() can use dedicated
framebuffer region to serve any MMIO request from any device. The
semantics one might assume of a parameter named "fb_overlap_ok"
aren't implemented because !fb_overlap_ok essentially has no effect.
The existing semantics are really "prefer_fb_overlap". This patch
implements the expected and needed semantics, which is to not allocate
from the frame buffer space when !fb_overlap_ok.
Note, Gen2 VMs are usually unaffected by the issue because
framebuffer region is already taken by EFI fb (in case kernel supports
it) but Gen1 VMs may have this region unclaimed by the time Hyper-V PCI
pass-through driver tries allocating MMIO space if Hyper-V DRM/FB drivers
load after it. Devices can be brought up in any sequence so let's
resolve the issue by always ignoring 'fb_mmio' region for non-FB
requests, even if the region is unclaimed.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20220827130345.1320254-4-vkuznets@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
vmbus_reserve_fb() tries reserving framebuffer region iff
'screen_info.lfb_base' is set. Gen2 VMs seem to have it set by EFI
and/or by the kernel EFI FB driver (or, in some edge cases like kexec,
the address where the buffer was moved, see
https://lore.kernel.org/all/20201014092429.1415040-1-kasong@redhat.com/)
but on Gen1 VM it depends on bootloader behavior. With grub, it depends
on 'gfxpayload=' setting but in some cases it is observed to be zero.
That being said, relying on 'screen_info.lfb_base' to reserve
framebuffer region is risky. For Gen1 VMs, it should always be
possible to get the address from the dedicated PCI device instead.
Check for legacy PCI video device presence and reserve the whole
region for framebuffer on Gen1 VMs.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20220827130345.1320254-3-vkuznets@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The 'enable-active-low' property is not a valid one.
Only 'enable-active-high' is valid, and when this property is absent
the gpio regulator will act as active low by default.
Remove the invalid 'enable-active-low' property.
Fixes: b33a22a1e7 ("arm64: dts: rockchip: add basic dts for Pine64 Quartz64-A")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20220827175140.1696699-2-festevam@denx.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The 'enable-active-low' property is not a valid one.
Only 'enable-active-high' is valid, and when this property is absent
the gpio regulator will act as active low by default.
Remove the invalid 'enable-active-low' property.
Fixes: 2c66fc34e9 ("arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://lore.kernel.org/r/20220827175140.1696699-1-festevam@denx.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The binding file clock/imx8ulp-pcc-clock.yaml indicates '#reset-cells'
is a required property, add it.
Fixes: fe6291e963 ("arm64: dts: imx8ulp: Add the basic dtsi file for imx8ulp")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
They were in wrong order, so fix it by switching them.
Fixes: 418d1d840e ("arm64: dts: freescale: add initial device tree for TQMa8MPQL with i.MX8MP")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The PGC (power gating controller) already handles the reset for the
GPUMIX power domain. By specifying it within the device tree the reset
it issued a 2nd time. This confuses the hardware during power up and
sporadically hangs the SoC. Fix this by removing the reset property and
let the hardware handle the reset.
Fixes: 9a0f3b157e ("arm64: dts: imx8mn: Enable GPU")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We've found the AUX channel to be less reliable with PCLK_EDP at a
higher rate (typically 25 MHz). This is especially important on systems
with PSR-enabled panels (like Gru-Kevin), since we make heavy, constant
use of AUX.
According to Rockchip, using any rate other than 24 MHz can cause
"problems between syncing the PHY an PCLK", which leads to all sorts of
unreliabilities around register operations.
Fixes: d67a38c5a6 ("arm64: dts: rockchip: move core edp from rk3399-kevin to shared chromebook")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: zain wang <wzz@rock-chips.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20220830131212.v2.1.I98d30623f13b785ca77094d0c0fd4339550553b6@changeid
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The CPLD_Dn GPIO assignment between SoM and CPLD has now been clarified
in schematic and the assignment is reversed. Update the DT to match the
hardware.
Fixes: 510c527b4f ("arm64: dts: imx8mm: Add i.MX8M Mini Toradex Verdin based Menlo board")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Using int type for sector index, there will be overflow in a large
capacity partition.
For example, if storage with sector size of 512 bytes and partition
capacity is larger than 2TB, there will be overflow.
Fixes: 1b61383854 ("exfat: reduce block requests when zeroing a cluster")
Cc: stable@vger.kernel.org # v5.19+
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
Acked-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
The NFSv4.0 protocol only supports open() by name. It cannot therefore
be used with open_by_handle() and friends, nor can it be re-exported by
knfsd.
Reported-by: Chuck Lever III <chuck.lever@oracle.com>
Fixes: 20fa190272 ("nfs: add export operations")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
We need to make sure that the req->rq_private_buf is completely up to
date before we make req->rq_reply_bytes_recvd visible to the
call_decode() routine in order to avoid triggering the WARN_ON().
Reported-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: 72691a269f ("SUNRPC: Don't reuse bvec on retransmission of the request")
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When a guest PEBS counter is cross-mapped by a host counter, software
will remove the corresponding bit in the arr[global_ctrl].guest and
expect hardware to perform a change of state "from enable to disable"
via the msr_slot[] switch during the vmx transaction.
The real world is that if user adjust the counter overflow value small
enough, it still opens a tiny race window for the previously PEBS-enabled
counter to write cross-mapped PEBS records into the guest's PEBS buffer,
when arr[global_ctrl].guest has been prioritised (switch_msr_special stuff)
to switch into the enabled state, while the arr[pebs_enable].guest has not.
Close this window by clearing invalid bits in the arr[global_ctrl].guest.
Fixes: 854250329c ("KVM: x86/pmu: Disable guest PEBS temporarily in two rare situations")
Signed-off-by: Like Xu <likexu@tencent.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220831033524.58561-1-likexu@tencent.com
For some Alder Lake N machine, the below unchecked MSR access error may be
triggered.
[ 0.088017] rcu: Hierarchical SRCU implementation.
[ 0.088017] unchecked MSR access error: WRMSR to 0x38f (tried to write
0x0001000f0000003f) at rIP: 0xffffffffb5684de8 (native_write_msr+0x8/0x30)
[ 0.088017] Call Trace:
[ 0.088017] <TASK>
[ 0.088017] __intel_pmu_enable_all.constprop.46+0x4a/0xa0
The Alder Lake N only has e-cores. The X86_FEATURE_HYBRID_CPU flag is
not set. The perf cannot retrieve the correct CPU type via
get_this_hybrid_cpu_type(). The model specific get_hybrid_cpu_type() is
hardcode to p-core. The wrong CPU type is given to the PMU of the
Alder Lake N.
Since Alder Lake N isn't in fact a hybrid CPU, remove ALDERLAKE_N from
the rest of {ALDER,RAPTOP}LAKE and create a non-hybrid PMU setup.
The differences between Gracemont and the previous Tremont are,
- Number of GP counters
- Load and store latency Events
- PEBS event_constraints
- Instruction Latency support
- Data source encoding
- Memory access latency encoding
Fixes: c2a960f7c5 ("perf/x86: Add new Alder Lake and Raptor Lake support")
Reported-by: Jianfeng Gao <jianfeng.gao@intel.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220831142702.153110-1-kan.liang@linux.intel.com
Access to registers is guarded by ingenic_tcu_{enable,disable}_regs()
so the stop bit can be cleared before accessing a timer channel, but
those functions did not clear the stop bit on SoCs with a global TCU
clock gate.
Testing on the X1000 has revealed that the stop bits must be cleared
_and_ the global TCU clock must be ungated to access timer registers.
This appears to be the norm on Ingenic SoCs, and is specified in the
documentation for the X1000 and numerous JZ47xx SoCs.
If the stop bit isn't cleared, register writes don't take effect and
the system can be left in a broken state, eg. the watchdog timer may
not run.
The bug probably went unnoticed because stop bits are zeroed when
the SoC is reset, and the kernel does not set them unless a timer
gets disabled at runtime. However, it is possible that a bootloader
or a previous kernel (if using kexec) leaves the stop bits set and
we should not rely on them being cleared.
Fixing this is easy: have ingenic_tcu_{enable,disable}_regs() always
clear the stop bit, regardless of the presence of a global TCU gate.
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Paul Cercueil <paul@crapouillou.net>
Fixes: 4f89e4b8f1 ("clk: ingenic: Add driver for the TCU clocks")
Cc: stable@vger.kernel.org
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220617122254.738900-1-aidanmacdonald.0x0@gmail.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Originally this was used in by the switch core driver to issue a reset.
But it turns out, this isn't just a switch core reset but instead it
will reset almost the complete SoC.
Instead of adding almost all devices of the SoC a shared reset line,
issue the reset once early on startup. Keep the reset controller for
backwards compatibility, but make the actual reset a noop.
Suggested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Michael Walle <michael@walle.cc>
Tested-by: Steen Hegelund <Steen.Hegelund@microchip.com> on Sparx5
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220826115607.1148489-2-michael@walle.cc
Reset support for SATA PHY is somehow broken and after calling it, kernel
is not able to detect and initialize SATA disk Samsung SSD 850 EMT0 [1].
Reset support was introduced in commit 934337080c ("phy: marvell:
phy-mvebu-a3700-comphy: Add native kernel implementation") as part of
complete rewrite of this driver. v1 patch series of that commit [2] did
not contain reset support and was tested that is working fine with
Ethernet, SATA and USB PHYs without issues too.
So for now remove broken reset support and change implementation of
power_off callback to power off all functions on specified lane (and not
only selected function) because during startup kernel does not know which
function was selected and configured by bootloader. Same logic was used
also in v1 patch series of that commit.
This change fixes issues with initialization of SATA disk Samsung SSD 850
and disk is working again, like before mentioned commit.
Once problem with PHY reset callback is solved its functionality could be
re-introduced. But for now it is unknown why it does not work.
[1] - https://lore.kernel.org/r/20220531124159.3e4lgn2v462irbtz@shindev/
[2] - https://lore.kernel.org/r/20211028184242.22105-1-kabel@kernel.org/
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 934337080c ("phy: marvell: phy-mvebu-a3700-comphy: Add native kernel implementation")
Cc: stable@vger.kernel.org # v5.18+
Signed-off-by: Pali Rohár <pali@kernel.org>
Tested-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20220829083046.15082-1-pali@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Switching between falling/rising edges for IRQ_TYPE_EDGE_BOTH on pins that
require debounce can cause the device to lose events due to a desync
between pin state and irq type.
This problem is resolved by switching between IRQ_TYPE_LEVEL_LOW and
IRQ_TYPE_LEVEL_HIGH instead.
Fixes: 936ee2675e ("gpio/rockchip: add driver for rockchip gpio")
Signed-off-by: João H. Spies <jhlspies@gmail.com>
Link: https://lore.kernel.org/r/20220808025121.110223-1-jhlspies@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In order to ensure only documented properties are present, node schemas
must have unevaluatedProperties or additionalProperties set to false
(typically).
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
- extcon is no more needed in 5.19 - so drop it
commit 51a9b2c03d ("phy: rockchip-inno-usb2: Handle ID IRQ")
- dr_mode was changed from host to otg in rk356x.dtsi
commit bc405bb3ee ("arm64: dts: rockchip: enable otg/drd
operation of usb_host0_xhci in rk356x")
change it back on board level as id-pin on r2pro is not connected
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20220821121929.244112-1-linux@fw-web.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Gru-Bob board does not have a pull-up resistor on its
WLAN_HOST_WAKE# pin, but Kevin does. The production/vendor kernel
specified the pin configuration correctly as a pull-up, but this didn't
get ported correctly to upstream.
This means Bob's WLAN_HOST_WAKE# pin is floating, causing inconsistent
wakeup behavior.
Note that bt_host_wake_l has a similar dynamic, but apparently the
upstream choice was to redundantly configure both internal and external
pull-up on Kevin (see the "Kevin has an external pull up" comment in
rk3399-gru.dtsi). This doesn't cause any functional problem, although
it's perhaps wasteful.
Fixes: 8559bbeeb8 ("arm64: dts: rockchip: add Google Bob")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220822164453.1.I75c57b48b0873766ec993bdfb7bc1e63da5a1637@changeid
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
After the recently added new scmi_msg_dump traces, the general format of
the various other SCMI traces are not consistent.
As an example the full traces of a simple PERF_LEVEL_SET:
| cpufreq-set-276 scmi_xfer_begin: transfer_id=145 msg_id=7 protocol_id=19 seq=145 poll=0
| cpufreq-set-276 scmi_msg_dump: pt=13 t=CMND msg_id=07 seq=0091 s=0 pyld=000000008066ab13
| cpufreq-set-276 scmi_xfer_response_wait: transfer_id=145 msg_id=7 protocol_id=19 seq=145 tmo_ms=5000 poll=0
| <idle>-0 scmi_msg_dump: pt=13 t=RESP msg_id=07 seq=0091 s=0 pyld=
| <idle>-0 scmi_rx_done: transfer_id=145 msg_id=7 protocol_id=19 seq=145 msg_type=0
| cpufreq-set-276 scmi_xfer_end: transfer_id=145 msg_id=7 protocol_id=19 seq=145 status=0
... where the same information is being reported using different names
(protocol_id= vs pt=) and even worst different bases, which is hard to
read and to parse.
So let us unify them, using the same naming and ordering of the fields
(wherever possible) and moving all the protocol related fields to base-16
while keeping in base-10 timeouts, res_id and values, so that the new
traces would be like:
| cpufreq-set-274 scmi_xfer_begin: pt=13 msg_id=07 seq=0092 transfer_id=92 poll=0
| cpufreq-set-274 scmi_msg_dump: pt=13 t=CMND msg_id=07 seq=0092 s=0 pyld=000000008066ab13
| cpufreq-set-274 scmi_xfer_response_wait: pt=13 msg_id=07 seq=0092 transfer_id=92 tmo_ms=5000 poll=0
| cat-256 scmi_msg_dump: pt=13 t=RESP msg_id=07 seq=0092 s=0 pyld=
| cat-256 scmi_rx_done: pt=13 msg_id=07 seq=0092 transfer_id=92 msg_type=0
| cpufreq-set-274 scmi_xfer_end: pt=13 msg_id=07 seq=0092 transfer_id=92 s=0
Link: https://lore.kernel.org/r/20220818132309.584042-2-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Currently, when removing the SCMI PM driver not all the resources
registered with genpd subsystem are properly de-registered.
As a side effect of this after a driver unload/load cycle you get a
splat with a few warnings like this:
| debugfs: Directory 'BIG_CPU0' with parent 'pm_genpd' already present!
| debugfs: Directory 'BIG_CPU1' with parent 'pm_genpd' already present!
| debugfs: Directory 'LITTLE_CPU0' with parent 'pm_genpd' already present!
| debugfs: Directory 'LITTLE_CPU1' with parent 'pm_genpd' already present!
| debugfs: Directory 'LITTLE_CPU2' with parent 'pm_genpd' already present!
| debugfs: Directory 'LITTLE_CPU3' with parent 'pm_genpd' already present!
| debugfs: Directory 'BIG_SSTOP' with parent 'pm_genpd' already present!
| debugfs: Directory 'LITTLE_SSTOP' with parent 'pm_genpd' already present!
| debugfs: Directory 'DBGSYS' with parent 'pm_genpd' already present!
| debugfs: Directory 'GPUTOP' with parent 'pm_genpd' already present!
Add a proper scmi_pm_domain_remove callback to the driver in order to
take care of all the needed cleanups not handled by devres framework.
Link: https://lore.kernel.org/r/20220817172731.1185305-7-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
SCMI Reset protocol specification allows the asynchronous reset request
only when an autonomous reset action is specified. Reset requests based
on explicit assert/deassert of signals should not be served
asynchronously.
Current implementation will instead issue an asynchronous request in any
case, as long as the reset domain had advertised to support asynchronous
resets.
Avoid requesting the asynchronous resets when the reset action is not
of the autonomous type, even if the target reset domain does, in general,
support the asynchronous requests.
Link: https://lore.kernel.org/r/20220817172731.1185305-6-cristian.marussi@arm.com
Fixes: 95a15d80aa ("firmware: arm_scmi: Add RESET protocol in SCMI v2.0")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
The system hangs up when batman-adv soft-interface is created on
hard-interface with small MTU. For example, the following commands
create batman-adv soft-interface on dummy interface with zero MTU:
# ip link add name dummy0 type dummy
# ip link set mtu 0 dev dummy0
# ip link set up dev dummy0
# ip link add name bat0 type batadv
# ip link set dev dummy0 master bat0
These commands cause the system hang up with the following messages:
[ 90.578925][ T6689] batman_adv: bat0: Adding interface: dummy0
[ 90.580884][ T6689] batman_adv: bat0: The MTU of interface dummy0 is too small (0) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1560 would solve the problem.
[ 90.586264][ T6689] batman_adv: bat0: Interface activated: dummy0
[ 90.590061][ T6689] batman_adv: bat0: Forced to purge local tt entries to fit new maximum fragment MTU (-320)
[ 90.595517][ T6689] batman_adv: bat0: Forced to purge local tt entries to fit new maximum fragment MTU (-320)
[ 90.598499][ T6689] batman_adv: bat0: Forced to purge local tt entries to fit new maximum fragment MTU (-320)
This patch fixes this issue by returning error when enabling
hard-interface with small MTU size.
Fixes: c6c8fea297 ("net: Add batman-adv meshing protocol")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Commit 78c44d910d ("drivers/of: Fix depth when unflattening devicetree")
forgot to fix up the depth check in the loop body in unflatten_dt_nodes()
which makes it possible to overflow the nps[] buffer...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Fixes: 78c44d910d ("drivers/of: Fix depth when unflattening devicetree")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/7c354554-006f-6b31-c195-cdfe4caee392@omp.ru
Like Hillf Danton mentioned
syzbot should have been able to catch cancel_work_sync() in work context
by checking lockdep_map in __flush_work() for both flush and cancel.
in [1], being unable to report an obvious deadlock scenario shown below is
broken. From locking dependency perspective, sync version of cancel request
should behave as if flush request, for it waits for completion of work if
that work has already started execution.
----------
#include <linux/module.h>
#include <linux/sched.h>
static DEFINE_MUTEX(mutex);
static void work_fn(struct work_struct *work)
{
schedule_timeout_uninterruptible(HZ / 5);
mutex_lock(&mutex);
mutex_unlock(&mutex);
}
static DECLARE_WORK(work, work_fn);
static int __init test_init(void)
{
schedule_work(&work);
schedule_timeout_uninterruptible(HZ / 10);
mutex_lock(&mutex);
cancel_work_sync(&work);
mutex_unlock(&mutex);
return -EINVAL;
}
module_init(test_init);
MODULE_LICENSE("GPL");
----------
The check this patch restores was added by commit 0976dfc1d0
("workqueue: Catch more locking problems with flush_work()").
Then, lockdep's crossrelease feature was added by commit b09be676e0
("locking/lockdep: Implement the 'crossrelease' feature"). As a result,
this check was once removed by commit fd1a5b04df ("workqueue: Remove
now redundant lock acquisitions wrt. workqueue flushes").
But lockdep's crossrelease feature was removed by commit e966eaeeb6
("locking/lockdep: Remove the cross-release locking checks"). At this
point, this check should have been restored.
Then, commit d6e89786be ("workqueue: skip lockdep wq dependency in
cancel_work_sync()") introduced a boolean flag in order to distinguish
flush_work() and cancel_work_sync(), for checking "struct workqueue_struct"
dependency when called from cancel_work_sync() was causing false positives.
Then, commit 87915adc3f ("workqueue: re-add lockdep dependencies for
flushing") tried to restore "struct work_struct" dependency check, but by
error checked this boolean flag. Like an example shown above indicates,
"struct work_struct" dependency needs to be checked for both flush_work()
and cancel_work_sync().
Link: https://lkml.kernel.org/r/20220504044800.4966-1-hdanton@sina.com [1]
Reported-by: Hillf Danton <hdanton@sina.com>
Suggested-by: Lai Jiangshan <jiangshanlai@gmail.com>
Fixes: 87915adc3f ("workqueue: re-add lockdep dependencies for flushing")
Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Tejun Heo <tj@kernel.org>
smatch complains that 'ret' may be returned un-initialized.
Explicitly return 0 if we reach the end of the function (should
'opp_table->clk_count' be 0).
Fixes: 8174a3a613 ("OPP: Provide a simple implementation to configure multiple clocks")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
I got an infinite loop and a WARNING report when executing a tail command
in virtiofs.
WARNING: CPU: 10 PID: 964 at fs/iomap/iter.c:34 iomap_iter+0x3a2/0x3d0
Modules linked in:
CPU: 10 PID: 964 Comm: tail Not tainted 5.19.0-rc7
Call Trace:
<TASK>
dax_iomap_rw+0xea/0x620
? __this_cpu_preempt_check+0x13/0x20
fuse_dax_read_iter+0x47/0x80
fuse_file_read_iter+0xae/0xd0
new_sync_read+0xfe/0x180
? 0xffffffff81000000
vfs_read+0x14d/0x1a0
ksys_read+0x6d/0xf0
__x64_sys_read+0x1a/0x20
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The tail command will call read() with a count of 0. In this case,
iomap_iter() will report this WARNING, and always return 1 which casuing
the infinite loop in dax_iomap_rw().
Fixing by checking count whether is 0 in dax_iomap_rw().
Fixes: ca289e0b95 ("fsdax: switch dax_iomap_rw to use iomap_iter")
Signed-off-by: Li Jinlin <lijinlin3@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Link: https://lore.kernel.org/r/20220725032050.3873372-1-lijinlin3@huawei.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
With the nd_namespace_blk and nd_blk_region infrastructures being removed,
the ndtest still has some references to the old code. So the
compilation fails as below,
../tools/testing/nvdimm/test/ndtest.c:204:25: error: ‘ND_DEVICE_NAMESPACE_BLK’ undeclared here (not in a function); did you mean ‘ND_DEVICE_NAMESPACE_IO’?
204 | .type = ND_DEVICE_NAMESPACE_BLK,
| ^~~~~~~~~~~~~~~~~~~~~~~
| ND_DEVICE_NAMESPACE_IO
../tools/testing/nvdimm/test/ndtest.c: In function ‘ndtest_create_region’:
../tools/testing/nvdimm/test/ndtest.c:630:17: error: ‘ndbr_desc’ undeclared (first use in this function); did you mean ‘ndr_desc’?
630 | ndbr_desc.enable = ndtest_blk_region_enable;
| ^~~~~~~~~
| ndr_desc
../tools/testing/nvdimm/test/ndtest.c:630:17: note: each undeclared identifier is reported only once for each function it appears in
../tools/testing/nvdimm/test/ndtest.c:630:36: error: ‘ndtest_blk_region_enable’ undeclared (first use in this function)
630 | ndbr_desc.enable = ndtest_blk_region_enable;
| ^~~~~~~~~~~~~~~~~~~~~~~~
../tools/testing/nvdimm/test/ndtest.c:631:35: error: ‘ndtest_blk_do_io’ undeclared (first use in this function); did you mean ‘ndtest_blk_mmio’?
631 | ndbr_desc.do_io = ndtest_blk_do_io;
| ^~~~~~~~~~~~~~~~
| ndtest_blk_mmio
The current patch removes the specific code to cleanup all obsolete
references.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Link: https://lore.kernel.org/r/165763940218.3501174.7103619358744815702.stgit@ltc-boston123.aus.stglabs.ibm.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Kernel test robot detected name collision when compiled on 'um'
architecture. Rename "to_phys()" to "pmem_to_phys()".
>> drivers/nvdimm/pmem.c:48:20: error: conflicting types for 'to_phys'; have 'phys_addr_t(struct pmem_device *, phys_addr_t)' {aka 'long long unsigned int(struct pmem_device *, long long unsigned int)'}
48 | static phys_addr_t to_phys(struct pmem_device *pmem, phys_addr_t offset)
| ^~~~~~~
In file included from arch/um/include/asm/page.h:98,
from arch/um/include/asm/thread_info.h:15,
from include/linux/thread_info.h:60,
from include/asm-generic/preempt.h:5,
from ./arch/um/include/generated/asm/preempt.h:1,
arch/um/include/shared/mem.h:12:29: note: previous definition of 'to_phys' with type 'long unsigned int(void *)'
12 | static inline unsigned long to_phys(void *virt)
| ^~~~~~~
vim +48 drivers/nvdimm/pmem.c
47
> 48 static phys_addr_t to_phys(struct pmem_device *pmem, phys_addr_t offset)
49 {
50 return pmem->phys_addr + offset;
51 }
52
Fixes: 9409c9b670 (pmem: refactor pmem_clear_poison())
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jane Chu <jane.chu@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220630182802.3250449-1-jane.chu@oracle.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
