Linux 5.7-rc2

When remapping a mapping where a portion of a VMA is remapped
into another portion of the VMA it can cause the VMA to become
split. During the copy_vma operation the VMA can actually
be remerged if it's an anonymous VMA whose pages have not yet
been faulted. This isn't normally a problem because at the end
of the remap the original portion is unmapped causing it to
become split again.

However, MREMAP_DONTUNMAP leaves that original portion in place which
means that the VMA which was split and then remerged is not actually
split at the end of the mremap. This patch fixes a bug where
we don't detect that the VMAs got remerged and we end up
putting back VM_ACCOUNT on the next mapping which is completely
unreleated. When that next mapping is unmapped it results in
incorrectly unaccounting for the memory which was never accounted,
and eventually we will underflow on the memory comittment.

There is also another issue which is similar, we're currently
accouting for the number of pages in the new_vma but that's wrong.
We need to account for the length of the remap operation as that's
all that is being added. If there was a mapping already at that
location its comittment would have been adjusted as part of
the munmap at the start of the mremap.

A really simple repro can be seen in:
https://gist.github.com/bgaff/e101ce99da7d9a8c60acc641d07f312c

Fixes: e346b38130 ("mm/mremap: add MREMAP_DONTUNMAP to mremap()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Brian Geffon <bgeffon@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation/admin-guide/sysctl/kernel.rst

@@ -390,9 +390,17 @@ When ``kptr_restrict`` is set to 2, kernel pointers printed using
 modprobe
 ========
 
-This gives the full path of the modprobe command which the kernel will
-use to load modules. This can be used to debug module loading
-requests::
+The full path to the usermode helper for autoloading kernel modules,
+by default "/sbin/modprobe".  This binary is executed when the kernel
+requests a module.  For example, if userspace passes an unknown
+filesystem type to mount(), then the kernel will automatically request
+the corresponding filesystem module by executing this usermode helper.
+This usermode helper should insert the needed module into the kernel.
+
+This sysctl only affects module autoloading.  It has no effect on the
+ability to explicitly insert modules.
+
+This sysctl can be used to debug module loading requests::
 
     echo '#! /bin/sh' > /tmp/modprobe
     echo 'echo "$@" >> /tmp/modprobe.log' >> /tmp/modprobe
@@ -400,10 +408,15 @@ requests::
     chmod a+x /tmp/modprobe
     echo /tmp/modprobe > /proc/sys/kernel/modprobe
 
-This only applies when the *kernel* is requesting that the module be
-loaded; it won't have any effect if the module is being loaded
-explicitly using ``modprobe`` from userspace.
+Alternatively, if this sysctl is set to the empty string, then module
+autoloading is completely disabled.  The kernel will not try to
+execute a usermode helper at all, nor will it call the
+kernel_module_request LSM hook.
 
+If CONFIG_STATIC_USERMODEHELPER=y is set in the kernel configuration,
+then the configured static usermode helper overrides this sysctl,
+except that the empty string is still accepted to completely disable
+module autoloading as described above.
 
 modules_disabled
 ================
@@ -446,28 +459,6 @@ Notes:
      successful IPC object allocation. If an IPC object allocation syscall
      fails, it is undefined if the value remains unmodified or is reset to -1.
 
-modprobe:
-=========
-
-The path to the usermode helper for autoloading kernel modules, by
-default "/sbin/modprobe".  This binary is executed when the kernel
-requests a module.  For example, if userspace passes an unknown
-filesystem type to mount(), then the kernel will automatically request
-the corresponding filesystem module by executing this usermode helper.
-This usermode helper should insert the needed module into the kernel.
-
-This sysctl only affects module autoloading.  It has no effect on the
-ability to explicitly insert modules.
-
-If this sysctl is set to the empty string, then module autoloading is
-completely disabled.  The kernel will not try to execute a usermode
-helper at all, nor will it call the kernel_module_request LSM hook.
-
-If CONFIG_STATIC_USERMODEHELPER=y is set in the kernel configuration,
-then the configured static usermode helper overrides this sysctl,
-except that the empty string is still accepted to completely disable
-module autoloading as described above.
-
 nmi_watchdog
 ============
 

Documentation/core-api/timekeeping.rst

@@ -154,9 +154,9 @@ architectures. These are the recommended replacements:
 
 	Use ktime_get() or ktime_get_ts64() instead.
 
-.. c:function:: struct timeval do_gettimeofday( void )
-		struct timespec getnstimeofday( void )
-		struct timespec64 getnstimeofday64( void )
+.. c:function:: void do_gettimeofday( struct timeval * )
+		void getnstimeofday( struct timespec * )
+		void getnstimeofday64( struct timespec64 * )
 		void ktime_get_real_ts( struct timespec * )
 
 	ktime_get_real_ts64() is a direct replacement, but consider using

Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml

@@ -42,6 +42,10 @@ properties:
     description:
       See section 2.3.9 of the DeviceTree Specification.
 
+  '#address-cells': true
+
+  '#size-cells': true
+
 required:
   - "#interconnect-cells"
   - compatible
@@ -59,6 +63,8 @@ examples:
         compatible = "allwinner,sun5i-a13-mbus";
         reg = <0x01c01000 0x1000>;
         clocks = <&ccu CLK_MBUS>;
+        #address-cells = <1>;
+        #size-cells = <1>;
         dma-ranges = <0x00000000 0x40000000 0x20000000>;
         #interconnect-cells = <1>;
     };

Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml

@@ -91,7 +91,7 @@ required:
 
 examples:
   - |
-    vco1: clock@00 {
+    vco1: clock {
       compatible = "arm,impd1-vco1";
       #clock-cells = <0>;
       lock-offset = <0x08>;

Documentation/devicetree/bindings/display/bridge/adi,adv7123.txt

@@ -1,5 +1,5 @@
-Analog Device ADV7123 Video DAC
--------------------------------
+Analog Devices ADV7123 Video DAC
+--------------------------------
 
 The ADV7123 is a digital-to-analog converter that outputs VGA signals from a
 parallel video input.

Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt

@@ -1,5 +1,5 @@
-Analog Device ADV7511(W)/13/33/35 HDMI Encoders
------------------------------------------
+Analog Devices ADV7511(W)/13/33/35 HDMI Encoders
+------------------------------------------------
 
 The ADV7511, ADV7511W, ADV7513, ADV7533 and ADV7535 are HDMI audio and video
 transmitters compatible with HDMI 1.4 and DVI 1.0. They support color space

Documentation/devicetree/bindings/dma/adi,axi-dmac.txt

@@ -1,4 +1,4 @@
-Analog Device AXI-DMAC DMA controller
+Analog Devices AXI-DMAC DMA controller
 
 Required properties:
  - compatible: Must be "adi,axi-dmac-1.00.a".

Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml

@@ -2,7 +2,7 @@
 # Copyright 2019 Analog Devices Inc.
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/bindings/hwmon/adi,axi-fan-control.yaml#
+$id: http://devicetree.org/schemas/hwmon/adi,axi-fan-control.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Analog Devices AXI FAN Control Device Tree Bindings
@@ -47,7 +47,7 @@ required:
 
 examples:
   - |
-    fpga_axi: fpga-axi@0 {
+    fpga_axi: fpga-axi {
             #address-cells = <0x2>;
             #size-cells = <0x1>;
 

Documentation/devicetree/bindings/hwmon/adt7475.yaml

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/adt7475.yaml#
+$id: http://devicetree.org/schemas/hwmon/adt7475.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: ADT7475 hwmon sensor

Documentation/devicetree/bindings/iio/dac/ad5755.txt

@@ -1,4 +1,4 @@
-* Analog Device AD5755 IIO Multi-Channel DAC Linux Driver
+* Analog Devices AD5755 IIO Multi-Channel DAC Linux Driver
 
 Required properties:
  - compatible: Has to contain one of the following:

Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml

@@ -2,7 +2,7 @@
 # Copyright 2020 Analog Devices Inc.
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/bindings/iio/dac/adi,ad5770r.yaml#
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5770r.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Analog Devices AD5770R DAC device driver
@@ -49,93 +49,86 @@ properties:
       asserted during driver probe.
     maxItems: 1
 
-  channel0:
+  channel@0:
     description: Represents an external channel which are
       connected to the DAC. Channel 0 can act both as a current
       source and sink.
     type: object
 
     properties:
-      num:
+      reg:
         description: This represents the channel number.
-        items:
-          const: 0
+        const: 0
 
       adi,range-microamp:
           description: Output range of the channel.
           oneOf:
-            - $ref: /schemas/types.yaml#/definitions/int32-array
             - items:
-                - enum: [0 300000]
-                - enum: [-60000 0]
-                - enum: [-60000 300000]
+                - const: 0
+                - const: 300000
+            - items:
+                - const: -60000
+                - const: 0
+            - items:
+                - const: -60000
+                - const: 300000
 
-  channel1:
+  channel@1:
     description: Represents an external channel which are
       connected to the DAC.
     type: object
 
     properties:
-      num:
+      reg:
         description: This represents the channel number.
-        items:
-          const: 1
+        const: 1
 
       adi,range-microamp:
           description: Output range of the channel.
-          oneOf:
-            - $ref: /schemas/types.yaml#/definitions/uint32-array
-            - items:
-                - enum: [0 140000]
-                - enum: [0 250000]
+          items:
+            - const: 0
+            - enum: [ 140000, 250000 ]
 
-  channel2:
+  channel@2:
     description: Represents an external channel which are
       connected to the DAC.
     type: object
 
     properties:
-      num:
+      reg:
         description: This represents the channel number.
-        items:
-          const: 2
+        const: 2
 
       adi,range-microamp:
           description: Output range of the channel.
-          oneOf:
-            - $ref: /schemas/types.yaml#/definitions/uint32-array
-            - items:
-                - enum: [0 140000]
-                - enum: [0 250000]
+          items:
+            - const: 0
+            - enum: [ 55000, 150000 ]
 
 patternProperties:
   "^channel@([3-5])$":
     type: object
     description: Represents the external channels which are connected to the DAC.
     properties:
-      num:
+      reg:
         description: This represents the channel number.
-        items:
-          minimum: 3
-          maximum: 5
+        minimum: 3
+        maximum: 5
 
       adi,range-microamp:
           description: Output range of the channel.
-          oneOf:
-            - $ref: /schemas/types.yaml#/definitions/uint32-array
-            - items:
-                - enum: [0 45000]
-                - enum: [0 100000]
+          items:
+            - const: 0
+            - enum: [ 45000, 100000 ]
 
 required:
 - reg
-- diff-channels
-- channel0
-- channel1
-- channel2
-- channel3
-- channel4
-- channel5
+- channel@0
+- channel@1
+- channel@2
+- channel@3
+- channel@4
+- channel@5
 
 examples:
   - |
@@ -144,40 +137,42 @@ examples:
                 #size-cells = <0>;
 
                 ad5770r@0 {
-                        compatible = "ad5770r";
+                        compatible = "adi,ad5770r";
                         reg = <0>;
                         spi-max-frequency = <1000000>;
                         vref-supply = <&vref>;
                         adi,external-resistor;
                         reset-gpios = <&gpio 22 0>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
 
                         channel@0 {
-                                num = <0>;
-                                adi,range-microamp = <(-60000) 300000>;
+                                reg = <0>;
+                                adi,range-microamp = <0 300000>;
                         };
 
                         channel@1 {
-                                num = <1>;
+                                reg = <1>;
                                 adi,range-microamp = <0 140000>;
                         };
 
                         channel@2 {
-                                num = <2>;
+                                reg = <2>;
                                 adi,range-microamp = <0 55000>;
                         };
 
                         channel@3 {
-                                num = <3>;
+                                reg = <3>;
                                 adi,range-microamp = <0 45000>;
                         };
 
                         channel@4 {
-                                num = <4>;
+                                reg = <4>;
                                 adi,range-microamp = <0 45000>;
                         };
 
                         channel@5 {
-                                num = <5>;
+                                reg = <5>;
                                 adi,range-microamp = <0 45000>;
                         };
                 };

Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml

@@ -109,7 +109,7 @@ examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-    i2c@00000000 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
       edt-ft5x06@38 {

Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml

@@ -56,9 +56,8 @@ properties:
       cell with zero.
     allOf:
       - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - items:
-          minItems: 4
-          maxItems: 4
+      - minItems: 4
+        maxItems: 4
 
 
 required:

Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml

@@ -97,30 +97,35 @@ examples:
     #include <dt-bindings/clock/tegra186-clock.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-    memory-controller@2c00000 {
-        compatible = "nvidia,tegra186-mc";
-        reg = <0x0 0x02c00000 0x0 0xb0000>;
-        interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
-
+    bus {
         #address-cells = <2>;
         #size-cells = <2>;
 
-        ranges = <0x0 0x02c00000 0x02c00000 0x0 0xb0000>;
+        memory-controller@2c00000 {
+            compatible = "nvidia,tegra186-mc";
+            reg = <0x0 0x02c00000 0x0 0xb0000>;
+            interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
 
-        /*
-         * Memory clients have access to all 40 bits that the memory
-         * controller can address.
-         */
-        dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
+            #address-cells = <2>;
+            #size-cells = <2>;
 
-        external-memory-controller@2c60000 {
-            compatible = "nvidia,tegra186-emc";
-            reg = <0x0 0x02c60000 0x0 0x50000>;
-            interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&bpmp TEGRA186_CLK_EMC>;
-            clock-names = "emc";
+            ranges = <0x0 0x02c00000 0x0 0x02c00000 0x0 0xb0000>;
 
-            nvidia,bpmp = <&bpmp>;
+            /*
+             * Memory clients have access to all 40 bits that the memory
+             * controller can address.
+             */
+            dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
+
+            external-memory-controller@2c60000 {
+                compatible = "nvidia,tegra186-emc";
+                reg = <0x0 0x02c60000 0x0 0x50000>;
+                interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&bpmp TEGRA186_CLK_EMC>;
+                clock-names = "emc";
+
+                nvidia,bpmp = <&bpmp>;
+            };
         };
     };
 

Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml

@@ -123,7 +123,9 @@ examples:
     #include <dt-bindings/leds/common.h>
 
     i2c {
-      pmic: pmic@4b {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic: pmic@4b {
             compatible = "rohm,bd71837";
             reg = <0x4b>;
             interrupt-parent = <&gpio1>;

Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml

@@ -128,7 +128,9 @@ examples:
     #include <dt-bindings/leds/common.h>
 
     i2c {
-      pmic: pmic@4b {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic: pmic@4b {
             compatible = "rohm,bd71847";
             reg = <0x4b>;
             interrupt-parent = <&gpio1>;

Documentation/devicetree/bindings/mfd/st,stpmic1.yaml

@@ -274,7 +274,7 @@ examples:
   - |
     #include <dt-bindings/mfd/st,stpmic1.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-    i2c@0 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
       pmic@33 {

Documentation/devicetree/bindings/net/ethernet-phy.yaml

@@ -43,6 +43,9 @@ properties:
           second group of digits is the Phy Identifier 2 register,
           this is the chip vendor OUI bits 19:24, followed by 10
           bits of a vendor specific ID.
+      - items:
+          - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
+          - const: ethernet-phy-ieee802.3-c22
       - items:
           - pattern: "^ethernet-phy-id[a-f0-9]{4}\\.[a-f0-9]{4}$"
           - const: ethernet-phy-ieee802.3-c45

Documentation/devicetree/bindings/net/fsl-fec.txt

@@ -22,6 +22,8 @@ Optional properties:
 - fsl,err006687-workaround-present: If present indicates that the system has
   the hardware workaround for ERR006687 applied and does not need a software
   workaround.
+- gpr: phandle of SoC general purpose register mode. Required for wake on LAN
+  on some SoCs
  -interrupt-names:  names of the interrupts listed in interrupts property in
   the same order. The defaults if not specified are
   __Number of interrupts__   __Default__

Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml

@@ -48,6 +48,7 @@ examples:
 
         switch@10 {
             compatible = "qca,qca8337";
+            reg = <0x10>;
             /* ... */
         };
     };

Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt

@@ -29,7 +29,7 @@ Required properties for compatible string qcom,wcn399x-bt:
 
 Optional properties for compatible string qcom,wcn399x-bt:
 
- - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt
+ - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml
  - firmware-name: specify the name of nvm firmware to load
  - clocks: clock provided to the controller
 

Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml

@@ -146,7 +146,7 @@ patternProperties:
       bindings specified in
       Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt
       Torrent SERDES should follow the bindings specified in
-      Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
+      Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
 
 required:
   - compatible

Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml

@@ -31,10 +31,17 @@ additionalProperties: false
 
 examples:
   - |
-    cros-ec@0 {
-        compatible = "google,cros-ec-spi";
-        cros_ec_pwm: ec-pwm {
-            compatible = "google,cros-ec-pwm";
-            #pwm-cells = <1>;
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cros-ec@0 {
+            compatible = "google,cros-ec-spi";
+            reg = <0>;
+
+            cros_ec_pwm: ec-pwm {
+                compatible = "google,cros-ec-pwm";
+                #pwm-cells = <1>;
+            };
         };
     };

Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml

@@ -39,7 +39,7 @@ additionalProperties: false
 
 examples:
   - |
-    rng {
+    rng@7e104000 {
         compatible = "brcm,bcm2835-rng";
         reg = <0x7e104000 0x10>;
         interrupts = <2 29>;

Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml

@@ -61,7 +61,7 @@ examples:
     #include <dt-bindings/clock/qcom,gcc-sdm845.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-    soc: soc@0 {
+    soc: soc {
         #address-cells = <2>;
         #size-cells = <2>;
 

Documentation/devicetree/bindings/usb/ingenic,musb.yaml

@@ -56,7 +56,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/clock/jz4740-cgu.h>
-    usb_phy: usb-phy@0 {
+    usb_phy: usb-phy {
       compatible = "usb-nop-xceiv";
       #phy-cells = <0>;
     };

Documentation/devicetree/bindings/usb/qcom,dwc3.txt

@@ -52,8 +52,8 @@ A child node must exist to represent the core DWC3 IP block. The name of
 the node is not important. The content of the node is defined in dwc3.txt.
 
 Phy documentation is provided in the following places:
-Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt   - USB3 QMP PHY
-Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt - USB2 QUSB2 PHY
+Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt    - USB3 QMP PHY
+Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml - USB2 QUSB2 PHY
 
 Example device nodes:
 

Documentation/devicetree/bindings/usb/rockchip,dwc3.txt

@@ -16,7 +16,7 @@ A child node must exist to represent the core DWC3 IP block. The name of
 the node is not important. The content of the node is defined in dwc3.txt.
 
 Phy documentation is provided in the following places:
-Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt - USB2.0 PHY
+Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml - USB2.0 PHY
 Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt     - Type-C PHY
 
 Example device nodes:

Documentation/hwmon/isl68137.rst

@@ -16,7 +16,7 @@ Supported chips:
 
   * Renesas ISL68220
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl68220'
 
     Addresses scanned: -
 
@@ -26,7 +26,7 @@ Supported chips:
 
   * Renesas ISL68221
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl68221'
 
     Addresses scanned: -
 
@@ -36,7 +36,7 @@ Supported chips:
 
   * Renesas ISL68222
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl68222'
 
     Addresses scanned: -
 
@@ -46,7 +46,7 @@ Supported chips:
 
   * Renesas ISL68223
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl68223'
 
     Addresses scanned: -
 
@@ -56,7 +56,7 @@ Supported chips:
 
   * Renesas ISL68224
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl68224'
 
     Addresses scanned: -
 
@@ -66,7 +66,7 @@ Supported chips:
 
   * Renesas ISL68225
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl68225'
 
     Addresses scanned: -
 
@@ -76,7 +76,7 @@ Supported chips:
 
   * Renesas ISL68226
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl68226'
 
     Addresses scanned: -
 
@@ -86,7 +86,7 @@ Supported chips:
 
   * Renesas ISL68227
 
-    Prefix: 'raa_dmpvr2_1rail'
+    Prefix: 'isl68227'
 
     Addresses scanned: -
 
@@ -96,7 +96,7 @@ Supported chips:
 
   * Renesas ISL68229
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl68229'
 
     Addresses scanned: -
 
@@ -106,7 +106,7 @@ Supported chips:
 
   * Renesas ISL68233
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl68233'
 
     Addresses scanned: -
 
@@ -116,7 +116,7 @@ Supported chips:
 
   * Renesas ISL68239
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl68239'
 
     Addresses scanned: -
 
@@ -126,7 +126,7 @@ Supported chips:
 
   * Renesas ISL69222
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69222'
 
     Addresses scanned: -
 
@@ -136,7 +136,7 @@ Supported chips:
 
   * Renesas ISL69223
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl69223'
 
     Addresses scanned: -
 
@@ -146,7 +146,7 @@ Supported chips:
 
   * Renesas ISL69224
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69224'
 
     Addresses scanned: -
 
@@ -156,7 +156,7 @@ Supported chips:
 
   * Renesas ISL69225
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69225'
 
     Addresses scanned: -
 
@@ -166,7 +166,7 @@ Supported chips:
 
   * Renesas ISL69227
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl69227'
 
     Addresses scanned: -
 
@@ -176,7 +176,7 @@ Supported chips:
 
   * Renesas ISL69228
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl69228'
 
     Addresses scanned: -
 
@@ -186,7 +186,7 @@ Supported chips:
 
   * Renesas ISL69234
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69234'
 
     Addresses scanned: -
 
@@ -196,7 +196,7 @@ Supported chips:
 
   * Renesas ISL69236
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69236'
 
     Addresses scanned: -
 
@@ -206,7 +206,7 @@ Supported chips:
 
   * Renesas ISL69239
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl69239'
 
     Addresses scanned: -
 
@@ -216,7 +216,7 @@ Supported chips:
 
   * Renesas ISL69242
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69242'
 
     Addresses scanned: -
 
@@ -226,7 +226,7 @@ Supported chips:
 
   * Renesas ISL69243
 
-    Prefix: 'raa_dmpvr2_1rail'
+    Prefix: 'isl69243'
 
     Addresses scanned: -
 
@@ -236,7 +236,7 @@ Supported chips:
 
   * Renesas ISL69247
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69247'
 
     Addresses scanned: -
 
@@ -246,7 +246,7 @@ Supported chips:
 
   * Renesas ISL69248
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69248'
 
     Addresses scanned: -
 
@@ -256,7 +256,7 @@ Supported chips:
 
   * Renesas ISL69254
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69254'
 
     Addresses scanned: -
 
@@ -266,7 +266,7 @@ Supported chips:
 
   * Renesas ISL69255
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69255'
 
     Addresses scanned: -
 
@@ -276,7 +276,7 @@ Supported chips:
 
   * Renesas ISL69256
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69256'
 
     Addresses scanned: -
 
@@ -286,7 +286,7 @@ Supported chips:
 
   * Renesas ISL69259
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69259'
 
     Addresses scanned: -
 
@@ -296,7 +296,7 @@ Supported chips:
 
   * Renesas ISL69260
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69260'
 
     Addresses scanned: -
 
@@ -306,7 +306,7 @@ Supported chips:
 
   * Renesas ISL69268
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69268'
 
     Addresses scanned: -
 
@@ -316,7 +316,7 @@ Supported chips:
 
   * Renesas ISL69269
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl69269'
 
     Addresses scanned: -
 
@@ -326,7 +326,7 @@ Supported chips:
 
   * Renesas ISL69298
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69298'
 
     Addresses scanned: -
 
@@ -336,7 +336,7 @@ Supported chips:
 
   * Renesas RAA228000
 
-    Prefix: 'raa_dmpvr2_hv'
+    Prefix: 'raa228000'
 
     Addresses scanned: -
 
@@ -346,7 +346,7 @@ Supported chips:
 
   * Renesas RAA228004
 
-    Prefix: 'raa_dmpvr2_hv'
+    Prefix: 'raa228004'
 
     Addresses scanned: -
 
@@ -356,7 +356,7 @@ Supported chips:
 
   * Renesas RAA228006
 
-    Prefix: 'raa_dmpvr2_hv'
+    Prefix: 'raa228006'
 
     Addresses scanned: -
 
@@ -366,7 +366,7 @@ Supported chips:
 
   * Renesas RAA228228
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'raa228228'
 
     Addresses scanned: -
 
@@ -376,7 +376,7 @@ Supported chips:
 
   * Renesas RAA229001
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'raa229001'
 
     Addresses scanned: -
 
@@ -386,7 +386,7 @@ Supported chips:
 
   * Renesas RAA229004
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'raa229004'
 
     Addresses scanned: -
 

Documentation/networking/devlink/devlink-trap.rst

@@ -257,6 +257,8 @@ drivers:
   * :doc:`netdevsim`
   * :doc:`mlxsw`
 
+.. _Generic-Packet-Trap-Groups:
+
 Generic Packet Trap Groups
 ==========================
 

Documentation/networking/index.rst

@@ -22,6 +22,7 @@ Contents:
    z8530book
    msg_zerocopy
    failover
+   net_dim
    net_failover
    phy
    sfp-phylink

Documentation/networking/ip-sysctl.txt

@@ -812,7 +812,7 @@ tcp_limit_output_bytes - INTEGER
 tcp_challenge_ack_limit - INTEGER
 	Limits number of Challenge ACK sent per second, as recommended
 	in RFC 5961 (Improving TCP's Robustness to Blind In-Window Attacks)
-	Default: 100
+	Default: 1000
 
 tcp_rx_skb_cache - BOOLEAN
 	Controls a per TCP socket cache of one skb, that might help

Documentation/networking/net_dim.rst

@@ -1,28 +1,20 @@
+======================================================
 Net DIM - Generic Network Dynamic Interrupt Moderation
 ======================================================
 
-Author:
-	Tal Gilboa <talgi@mellanox.com>
+:Author: Tal Gilboa <talgi@mellanox.com>
 
+.. contents:: :depth: 2
 
-Contents
-=========
-
-- Assumptions
-- Introduction
-- The Net DIM Algorithm
-- Registering a Network Device to DIM
-- Example
-
-Part 0: Assumptions
-======================
+Assumptions
+===========
 
 This document assumes the reader has basic knowledge in network drivers
 and in general interrupt moderation.
 
 
-Part I: Introduction
-======================
+Introduction
+============
 
 Dynamic Interrupt Moderation (DIM) (in networking) refers to changing the
 interrupt moderation configuration of a channel in order to optimize packet
@@ -41,14 +33,15 @@ number of wanted packets per event. The Net DIM algorithm ascribes importance to
 increase bandwidth over reducing interrupt rate.
 
 
-Part II: The Net DIM Algorithm
-===============================
+Net DIM Algorithm
+=================
 
 Each iteration of the Net DIM algorithm follows these steps:
-1. Calculates new data sample.
-2. Compares it to previous sample.
-3. Makes a decision - suggests interrupt moderation configuration fields.
-4. Applies a schedule work function, which applies suggested configuration.
+
+#. Calculates new data sample.
+#. Compares it to previous sample.
+#. Makes a decision - suggests interrupt moderation configuration fields.
+#. Applies a schedule work function, which applies suggested configuration.
 
 The first two steps are straightforward, both the new and the previous data are
 supplied by the driver registered to Net DIM. The previous data is the new data
@@ -89,19 +82,21 @@ manoeuvre as it may provide partial data or ignore the algorithm suggestion
 under some conditions.
 
 
-Part III: Registering a Network Device to DIM
-==============================================
+Registering a Network Device to DIM
+===================================
 
-Net DIM API exposes the main function net_dim(struct dim *dim,
-struct dim_sample end_sample). This function is the entry point to the Net
+Net DIM API exposes the main function net_dim().
+This function is the entry point to the Net
 DIM algorithm and has to be called every time the driver would like to check if
 it should change interrupt moderation parameters. The driver should provide two
-data structures: struct dim and struct dim_sample. Struct dim
+data structures: :c:type:`struct dim <dim>` and
+:c:type:`struct dim_sample <dim_sample>`. :c:type:`struct dim <dim>`
 describes the state of DIM for a specific object (RX queue, TX queue,
 other queues, etc.). This includes the current selected profile, previous data
 samples, the callback function provided by the driver and more.
-Struct dim_sample describes a data sample, which will be compared to the
-data sample stored in struct dim in order to decide on the algorithm's next
+:c:type:`struct dim_sample <dim_sample>` describes a data sample,
+which will be compared to the data sample stored in :c:type:`struct dim <dim>`
+in order to decide on the algorithm's next
 step. The sample should include bytes, packets and interrupts, measured by
 the driver.
 
@@ -110,9 +105,10 @@ main net_dim() function. The recommended method is to call net_dim() on each
 interrupt. Since Net DIM has a built-in moderation and it might decide to skip
 iterations under certain conditions, there is no need to moderate the net_dim()
 calls as well. As mentioned above, the driver needs to provide an object of type
-struct dim to the net_dim() function call. It is advised for each entity
-using Net DIM to hold a struct dim as part of its data structure and use it
-as the main Net DIM API object. The struct dim_sample should hold the latest
+:c:type:`struct dim <dim>` to the net_dim() function call. It is advised for
+each entity using Net DIM to hold a :c:type:`struct dim <dim>` as part of its
+data structure and use it as the main Net DIM API object.
+The :c:type:`struct dim_sample <dim_sample>` should hold the latest
 bytes, packets and interrupts count. No need to perform any calculations, just
 include the raw data.
 
@@ -124,19 +120,19 @@ the data flow. After the work is done, Net DIM algorithm needs to be set to
 the proper state in order to move to the next iteration.
 
 
-Part IV: Example
-=================
+Example
+=======
 
 The following code demonstrates how to register a driver to Net DIM. The actual
 usage is not complete but it should make the outline of the usage clear.
 
-my_driver.c:
+.. code-block:: c
 
-#include <linux/dim.h>
+  #include <linux/dim.h>
 
-/* Callback for net DIM to schedule on a decision to change moderation */
-void my_driver_do_dim_work(struct work_struct *work)
-{
+  /* Callback for net DIM to schedule on a decision to change moderation */
+  void my_driver_do_dim_work(struct work_struct *work)
+  {
 	/* Get struct dim from struct work_struct */
 	struct dim *dim = container_of(work, struct dim,
 				       work);
@@ -145,11 +141,11 @@ void my_driver_do_dim_work(struct work_struct *work)
 
 	/* Signal net DIM work is done and it should move to next iteration */
 	dim->state = DIM_START_MEASURE;
-}
+  }
 
-/* My driver's interrupt handler */
-int my_driver_handle_interrupt(struct my_driver_entity *my_entity, ...)
-{
+  /* My driver's interrupt handler */
+  int my_driver_handle_interrupt(struct my_driver_entity *my_entity, ...)
+  {
 	...
 	/* A struct to hold current measured data */
 	struct dim_sample dim_sample;
@@ -162,13 +158,19 @@ int my_driver_handle_interrupt(struct my_driver_entity *my_entity, ...)
 	/* Call net DIM */
 	net_dim(&my_entity->dim, dim_sample);
 	...
-}
+  }
 
-/* My entity's initialization function (my_entity was already allocated) */
-int my_driver_init_my_entity(struct my_driver_entity *my_entity, ...)
-{
+  /* My entity's initialization function (my_entity was already allocated) */
+  int my_driver_init_my_entity(struct my_driver_entity *my_entity, ...)
+  {
 	...
 	/* Initiate struct work_struct with my driver's callback function */
 	INIT_WORK(&my_entity->dim.work, my_driver_do_dim_work);
 	...
-}
+  }
+
+Dynamic Interrupt Moderation (DIM) library API
+==============================================
+
+.. kernel-doc:: include/linux/dim.h
+    :internal:

Documentation/x86/boot.rst

@@ -1399,8 +1399,8 @@ must have read/write permission; CS must be __BOOT_CS and DS, ES, SS
 must be __BOOT_DS; interrupt must be disabled; %rsi must hold the base
 address of the struct boot_params.
 
-EFI Handover Protocol
-=====================
+EFI Handover Protocol (deprecated)
+==================================
 
 This protocol allows boot loaders to defer initialisation to the EFI
 boot stub. The boot loader is required to load the kernel/initrd(s)
@@ -1408,6 +1408,12 @@ from the boot media and jump to the EFI handover protocol entry point
 which is hdr->handover_offset bytes from the beginning of
 startup_{32,64}.
 
+The boot loader MUST respect the kernel's PE/COFF metadata when it comes
+to section alignment, the memory footprint of the executable image beyond
+the size of the file itself, and any other aspect of the PE/COFF header
+that may affect correct operation of the image as a PE/COFF binary in the
+execution context provided by the EFI firmware.
+
 The function prototype for the handover entry point looks like this::
 
     efi_main(void *handle, efi_system_table_t *table, struct boot_params *bp)
@@ -1419,9 +1425,18 @@ UEFI specification. 'bp' is the boot loader-allocated boot params.
 
 The boot loader *must* fill out the following fields in bp::
 
-  - hdr.code32_start
   - hdr.cmd_line_ptr
   - hdr.ramdisk_image (if applicable)
   - hdr.ramdisk_size  (if applicable)
 
 All other fields should be zero.
+
+NOTE: The EFI Handover Protocol is deprecated in favour of the ordinary PE/COFF
+      entry point, combined with the LINUX_EFI_INITRD_MEDIA_GUID based initrd
+      loading protocol (refer to [0] for an example of the bootloader side of
+      this), which removes the need for any knowledge on the part of the EFI
+      bootloader regarding the internal representation of boot_params or any
+      requirements/limitations regarding the placement of the command line
+      and ramdisk in memory, or the placement of the kernel image itself.
+
+[0] https://github.com/u-boot/u-boot/commit/ec80b4735a593961fe701cc3a5d717d4739b0fd0

MAINTAINERS

@@ -1323,7 +1323,10 @@ ARM INTEGRATOR, VERSATILE AND REALVIEW SUPPORT
 M:	Linus Walleij <linus.walleij@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	Documentation/devicetree/bindings/arm/arm-boards
+F:	Documentation/devicetree/bindings/arm/arm,integrator.yaml
+F:	Documentation/devicetree/bindings/arm/arm,realview.yaml
+F:	Documentation/devicetree/bindings/arm/arm,versatile.yaml
+F:	Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
 F:	Documentation/devicetree/bindings/auxdisplay/arm-charlcd.txt
 F:	Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
 F:	Documentation/devicetree/bindings/i2c/i2c-versatile.txt
@@ -5552,7 +5555,7 @@ M:	Chen-Yu Tsai <wens@csie.org>
 L:	dri-devel@lists.freedesktop.org
 S:	Supported
 T:	git git://anongit.freedesktop.org/drm/drm-misc
-F:	Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+F:	Documentation/devicetree/bindings/display/allwinner*
 F:	drivers/gpu/drm/sun4i/
 
 DRM DRIVERS FOR AMLOGIC SOCS
@@ -5934,6 +5937,7 @@ M:	Tal Gilboa <talgi@mellanox.com>
 S:	Maintained
 F:	include/linux/dim.h
 F:	lib/dim/
+F:	Documentation/networking/net_dim.rst
 
 DZ DECSTATION DZ11 SERIAL DRIVER
 M:	"Maciej W. Rozycki" <macro@linux-mips.org>
@@ -13853,7 +13857,8 @@ S:	Maintained
 F:	drivers/scsi/qla1280.[ch]
 
 QLOGIC QLA2XXX FC-SCSI DRIVER
-M:	hmadhani@marvell.com
+M:	Nilesh Javali <njavali@marvell.com>
+M:	GR-QLogic-Storage-Upstream@marvell.com
 L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	Documentation/scsi/LICENSE.qla2xxx

Makefile

@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 7
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = Kleptomaniac Octopus
 
 # *DOCUMENTATION*

arch/arm/boot/compressed/head.S

@@ -1450,7 +1450,8 @@ ENTRY(efi_enter_kernel)
 		@ running beyond the PoU, and so calling cache_off below from
 		@ inside the PE/COFF loader allocated region is unsafe unless
 		@ we explicitly clean it to the PoC.
-		adr	r0, call_cache_fn		@ region of code we will
+ ARM(		adrl	r0, call_cache_fn	)
+ THUMB(		adr	r0, call_cache_fn	)	@ region of code we will
 		adr	r1, 0f				@ run with MMU off
 		bl	cache_clean_flush
 		bl	cache_off

arch/arm/boot/dts/imx6qdl.dtsi

@@ -1039,13 +1039,13 @@
 				compatible = "fsl,imx6q-fec";
 				reg = <0x02188000 0x4000>;
 				interrupt-names = "int0", "pps";
-				interrupts-extended =
-					<&intc 0 118 IRQ_TYPE_LEVEL_HIGH>,
-					<&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>,
+					     <0 119 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6QDL_CLK_ENET>,
 					 <&clks IMX6QDL_CLK_ENET>,
 					 <&clks IMX6QDL_CLK_ENET_REF>;
 				clock-names = "ipg", "ahb", "ptp";
+				gpr = <&gpr>;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/imx6qp.dtsi

@@ -77,7 +77,6 @@
 };
 
 &fec {
-	/delete-property/interrupts-extended;
 	interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>,
 		     <0 119 IRQ_TYPE_LEVEL_HIGH>;
 };

arch/arm/net/bpf_jit_32.c

@@ -929,7 +929,11 @@ static inline void emit_a32_rsh_i64(const s8 dst[],
 	rd = arm_bpf_get_reg64(dst, tmp, ctx);
 
 	/* Do LSR operation */
-	if (val < 32) {
+	if (val == 0) {
+		/* An immediate value of 0 encodes a shift amount of 32
+		 * for LSR. To shift by 0, don't do anything.
+		 */
+	} else if (val < 32) {
 		emit(ARM_MOV_SI(tmp2[1], rd[1], SRTYPE_LSR, val), ctx);
 		emit(ARM_ORR_SI(rd[1], tmp2[1], rd[0], SRTYPE_ASL, 32 - val), ctx);
 		emit(ARM_MOV_SI(rd[0], rd[0], SRTYPE_LSR, val), ctx);
@@ -955,7 +959,11 @@ static inline void emit_a32_arsh_i64(const s8 dst[],
 	rd = arm_bpf_get_reg64(dst, tmp, ctx);
 
 	/* Do ARSH operation */
-	if (val < 32) {
+	if (val == 0) {
+		/* An immediate value of 0 encodes a shift amount of 32
+		 * for ASR. To shift by 0, don't do anything.
+		 */
+	} else if (val < 32) {
 		emit(ARM_MOV_SI(tmp2[1], rd[1], SRTYPE_LSR, val), ctx);
 		emit(ARM_ORR_SI(rd[1], tmp2[1], rd[0], SRTYPE_ASL, 32 - val), ctx);
 		emit(ARM_MOV_SI(rd[0], rd[0], SRTYPE_ASR, val), ctx);
@@ -992,21 +1000,35 @@ static inline void emit_a32_mul_r64(const s8 dst[], const s8 src[],
 	arm_bpf_put_reg32(dst_hi, rd[0], ctx);
 }
 
+static bool is_ldst_imm(s16 off, const u8 size)
+{
+	s16 off_max = 0;
+
+	switch (size) {
+	case BPF_B:
+	case BPF_W:
+		off_max = 0xfff;
+		break;
+	case BPF_H:
+		off_max = 0xff;
+		break;
+	case BPF_DW:
+		/* Need to make sure off+4 does not overflow. */
+		off_max = 0xfff - 4;
+		break;
+	}
+	return -off_max <= off && off <= off_max;
+}
+
 /* *(size *)(dst + off) = src */
 static inline void emit_str_r(const s8 dst, const s8 src[],
-			      s32 off, struct jit_ctx *ctx, const u8 sz){
+			      s16 off, struct jit_ctx *ctx, const u8 sz){
 	const s8 *tmp = bpf2a32[TMP_REG_1];
-	s32 off_max;
 	s8 rd;
 
 	rd = arm_bpf_get_reg32(dst, tmp[1], ctx);
 
-	if (sz == BPF_H)
-		off_max = 0xff;
-	else
-		off_max = 0xfff;
-
-	if (off < 0 || off > off_max) {
+	if (!is_ldst_imm(off, sz)) {
 		emit_a32_mov_i(tmp[0], off, ctx);
 		emit(ARM_ADD_R(tmp[0], tmp[0], rd), ctx);
 		rd = tmp[0];
@@ -1035,18 +1057,12 @@ static inline void emit_str_r(const s8 dst, const s8 src[],
 
 /* dst = *(size*)(src + off) */
 static inline void emit_ldx_r(const s8 dst[], const s8 src,
-			      s32 off, struct jit_ctx *ctx, const u8 sz){
+			      s16 off, struct jit_ctx *ctx, const u8 sz){
 	const s8 *tmp = bpf2a32[TMP_REG_1];
 	const s8 *rd = is_stacked(dst_lo) ? tmp : dst;
 	s8 rm = src;
-	s32 off_max;
 
-	if (sz == BPF_H)
-		off_max = 0xff;
-	else
-		off_max = 0xfff;
-
-	if (off < 0 || off > off_max) {
+	if (!is_ldst_imm(off, sz)) {
 		emit_a32_mov_i(tmp[0], off, ctx);
 		emit(ARM_ADD_R(tmp[0], tmp[0], src), ctx);
 		rm = tmp[0];

arch/arm/xen/enlighten.c

@@ -36,7 +36,7 @@
 
 #include <linux/mm.h>
 
-struct start_info _xen_start_info;
+static struct start_info _xen_start_info;
 struct start_info *xen_start_info = &_xen_start_info;
 EXPORT_SYMBOL(xen_start_info);
 

arch/arm64/include/asm/sysreg.h

@@ -49,7 +49,9 @@
 #ifndef CONFIG_BROKEN_GAS_INST
 
 #ifdef __ASSEMBLY__
-#define __emit_inst(x)			.inst (x)
+// The space separator is omitted so that __emit_inst(x) can be parsed as
+// either an assembler directive or an assembler macro argument.
+#define __emit_inst(x)			.inst(x)
 #else
 #define __emit_inst(x)			".inst " __stringify((x)) "\n\t"
 #endif

arch/arm64/kernel/vdso.c

@@ -260,18 +260,7 @@ static int __aarch32_alloc_vdso_pages(void)
 	if (ret)
 		return ret;
 
-	ret = aarch32_alloc_kuser_vdso_page();
-	if (ret) {
-		unsigned long c_vvar =
-			(unsigned long)page_to_virt(aarch32_vdso_pages[C_VVAR]);
-		unsigned long c_vdso =
-			(unsigned long)page_to_virt(aarch32_vdso_pages[C_VDSO]);
-
-		free_page(c_vvar);
-		free_page(c_vdso);
-	}
-
-	return ret;
+	return aarch32_alloc_kuser_vdso_page();
 }
 #else
 static int __aarch32_alloc_vdso_pages(void)

arch/m68k/include/asm/Kbuild

@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 generated-y += syscall_table.h
 generic-y += extable.h
-generic-y += hardirq.h
 generic-y += kvm_para.h
 generic-y += local64.h
 generic-y += mcs_spinlock.h

arch/riscv/Kconfig

@@ -55,7 +55,7 @@ config RISCV
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_MMIOWB
 	select ARCH_HAS_DEBUG_VIRTUAL
-	select HAVE_EBPF_JIT
+	select HAVE_EBPF_JIT if MMU
 	select EDAC_SUPPORT
 	select ARCH_HAS_GIGANTIC_PAGE
 	select ARCH_HAS_SET_DIRECT_MAP

arch/riscv/net/bpf_jit_comp64.c

@@ -110,6 +110,16 @@ static bool is_32b_int(s64 val)
 	return -(1L << 31) <= val && val < (1L << 31);
 }
 
+static bool in_auipc_jalr_range(s64 val)
+{
+	/*
+	 * auipc+jalr can reach any signed PC-relative offset in the range
+	 * [-2^31 - 2^11, 2^31 - 2^11).
+	 */
+	return (-(1L << 31) - (1L << 11)) <= val &&
+		val < ((1L << 31) - (1L << 11));
+}
+
 static void emit_imm(u8 rd, s64 val, struct rv_jit_context *ctx)
 {
 	/* Note that the immediate from the add is sign-extended,
@@ -380,20 +390,24 @@ static void emit_sext_32_rd(u8 *rd, struct rv_jit_context *ctx)
 	*rd = RV_REG_T2;
 }
 
-static void emit_jump_and_link(u8 rd, s64 rvoff, bool force_jalr,
-			       struct rv_jit_context *ctx)
+static int emit_jump_and_link(u8 rd, s64 rvoff, bool force_jalr,
+			      struct rv_jit_context *ctx)
 {
 	s64 upper, lower;
 
 	if (rvoff && is_21b_int(rvoff) && !force_jalr) {
 		emit(rv_jal(rd, rvoff >> 1), ctx);
-		return;
+		return 0;
+	} else if (in_auipc_jalr_range(rvoff)) {
+		upper = (rvoff + (1 << 11)) >> 12;
+		lower = rvoff & 0xfff;
+		emit(rv_auipc(RV_REG_T1, upper), ctx);
+		emit(rv_jalr(rd, RV_REG_T1, lower), ctx);
+		return 0;
 	}
 
-	upper = (rvoff + (1 << 11)) >> 12;
-	lower = rvoff & 0xfff;
-	emit(rv_auipc(RV_REG_T1, upper), ctx);
-	emit(rv_jalr(rd, RV_REG_T1, lower), ctx);
+	pr_err("bpf-jit: target offset 0x%llx is out of range\n", rvoff);
+	return -ERANGE;
 }
 
 static bool is_signed_bpf_cond(u8 cond)
@@ -407,18 +421,16 @@ static int emit_call(bool fixed, u64 addr, struct rv_jit_context *ctx)
 	s64 off = 0;
 	u64 ip;
 	u8 rd;
+	int ret;
 
 	if (addr && ctx->insns) {
 		ip = (u64)(long)(ctx->insns + ctx->ninsns);
 		off = addr - ip;
-		if (!is_32b_int(off)) {
-			pr_err("bpf-jit: target call addr %pK is out of range\n",
-			       (void *)addr);
-			return -ERANGE;
-		}
 	}
 
-	emit_jump_and_link(RV_REG_RA, off, !fixed, ctx);
+	ret = emit_jump_and_link(RV_REG_RA, off, !fixed, ctx);
+	if (ret)
+		return ret;
 	rd = bpf_to_rv_reg(BPF_REG_0, ctx);
 	emit(rv_addi(rd, RV_REG_A0, 0), ctx);
 	return 0;
@@ -429,7 +441,7 @@ int bpf_jit_emit_insn(const struct bpf_insn *insn, struct rv_jit_context *ctx,
 {
 	bool is64 = BPF_CLASS(insn->code) == BPF_ALU64 ||
 		    BPF_CLASS(insn->code) == BPF_JMP;
-	int s, e, rvoff, i = insn - ctx->prog->insnsi;
+	int s, e, rvoff, ret, i = insn - ctx->prog->insnsi;
 	struct bpf_prog_aux *aux = ctx->prog->aux;
 	u8 rd = -1, rs = -1, code = insn->code;
 	s16 off = insn->off;
@@ -699,7 +711,9 @@ out_be:
 	/* JUMP off */
 	case BPF_JMP | BPF_JA:
 		rvoff = rv_offset(i, off, ctx);
-		emit_jump_and_link(RV_REG_ZERO, rvoff, false, ctx);
+		ret = emit_jump_and_link(RV_REG_ZERO, rvoff, false, ctx);
+		if (ret)
+			return ret;
 		break;
 
 	/* IF (dst COND src) JUMP off */
@@ -801,7 +815,6 @@ out_be:
 	case BPF_JMP | BPF_CALL:
 	{
 		bool fixed;
-		int ret;
 		u64 addr;
 
 		mark_call(ctx);
@@ -826,7 +839,9 @@ out_be:
 			break;
 
 		rvoff = epilogue_offset(ctx);
-		emit_jump_and_link(RV_REG_ZERO, rvoff, false, ctx);
+		ret = emit_jump_and_link(RV_REG_ZERO, rvoff, false, ctx);
+		if (ret)
+			return ret;
 		break;
 
 	/* dst = imm64 */

arch/x86/hyperv/hv_init.c

@@ -20,6 +20,7 @@
 #include <linux/mm.h>
 #include <linux/hyperv.h>
 #include <linux/slab.h>
+#include <linux/kernel.h>
 #include <linux/cpuhotplug.h>
 #include <linux/syscore_ops.h>
 #include <clocksource/hyperv_timer.h>
@@ -419,11 +420,14 @@ void hyperv_cleanup(void)
 }
 EXPORT_SYMBOL_GPL(hyperv_cleanup);
 
-void hyperv_report_panic(struct pt_regs *regs, long err)
+void hyperv_report_panic(struct pt_regs *regs, long err, bool in_die)
 {
 	static bool panic_reported;
 	u64 guest_id;
 
+	if (in_die && !panic_on_oops)
+		return;
+
 	/*
 	 * We prefer to report panic on 'die' chain as we have proper
 	 * registers to report, but if we miss it (e.g. on BUG()) we need

arch/x86/include/asm/efi.h

@@ -178,8 +178,10 @@ extern void efi_free_boot_services(void);
 extern pgd_t * __init efi_uv1_memmap_phys_prolog(void);
 extern void __init efi_uv1_memmap_phys_epilog(pgd_t *save_pgd);
 
+/* kexec external ABI */
 struct efi_setup_data {
 	u64 fw_vendor;
+	u64 __unused;
 	u64 tables;
 	u64 smbios;
 	u64 reserved[8];

arch/x86/include/asm/microcode_amd.h

@@ -41,7 +41,7 @@ struct microcode_amd {
 	unsigned int			mpb[0];
 };
 
-#define PATCH_MAX_SIZE PAGE_SIZE
+#define PATCH_MAX_SIZE (3 * PAGE_SIZE)
 
 #ifdef CONFIG_MICROCODE_AMD
 extern void __init load_ucode_amd_bsp(unsigned int family);

arch/x86/kernel/cpu/intel.c

@@ -1119,35 +1119,53 @@ void switch_to_sld(unsigned long tifn)
 	sld_update_msr(!(tifn & _TIF_SLD));
 }
 
-#define SPLIT_LOCK_CPU(model) {X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY}
-
 /*
- * The following processors have the split lock detection feature. But
- * since they don't have the IA32_CORE_CAPABILITIES MSR, the feature cannot
- * be enumerated. Enable it by family and model matching on these
- * processors.
+ * Bits in the IA32_CORE_CAPABILITIES are not architectural, so they should
+ * only be trusted if it is confirmed that a CPU model implements a
+ * specific feature at a particular bit position.
+ *
+ * The possible driver data field values:
+ *
+ * - 0: CPU models that are known to have the per-core split-lock detection
+ *	feature even though they do not enumerate IA32_CORE_CAPABILITIES.
+ *
+ * - 1: CPU models which may enumerate IA32_CORE_CAPABILITIES and if so use
+ *      bit 5 to enumerate the per-core split-lock detection feature.
  */
 static const struct x86_cpu_id split_lock_cpu_ids[] __initconst = {
-	SPLIT_LOCK_CPU(INTEL_FAM6_ICELAKE_X),
-	SPLIT_LOCK_CPU(INTEL_FAM6_ICELAKE_L),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X,		0),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_L,		0),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT,	1),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_D,	1),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_L,	1),
 	{}
 };
 
 void __init cpu_set_core_cap_bits(struct cpuinfo_x86 *c)
 {
-	u64 ia32_core_caps = 0;
+	const struct x86_cpu_id *m;
+	u64 ia32_core_caps;
 
-	if (c->x86_vendor != X86_VENDOR_INTEL)
+	if (boot_cpu_has(X86_FEATURE_HYPERVISOR))
 		return;
-	if (cpu_has(c, X86_FEATURE_CORE_CAPABILITIES)) {
-		/* Enumerate features reported in IA32_CORE_CAPABILITIES MSR. */
+
+	m = x86_match_cpu(split_lock_cpu_ids);
+	if (!m)
+		return;
+
+	switch (m->driver_data) {
+	case 0:
+		break;
+	case 1:
+		if (!cpu_has(c, X86_FEATURE_CORE_CAPABILITIES))
+			return;
 		rdmsrl(MSR_IA32_CORE_CAPS, ia32_core_caps);
-	} else if (!boot_cpu_has(X86_FEATURE_HYPERVISOR)) {
-		/* Enumerate split lock detection by family and model. */
-		if (x86_match_cpu(split_lock_cpu_ids))
-			ia32_core_caps |= MSR_IA32_CORE_CAPS_SPLIT_LOCK_DETECT;
+		if (!(ia32_core_caps & MSR_IA32_CORE_CAPS_SPLIT_LOCK_DETECT))
+			return;
+		break;
+	default:
+		return;
 	}
 
-	if (ia32_core_caps & MSR_IA32_CORE_CAPS_SPLIT_LOCK_DETECT)
-		split_lock_setup();
+	split_lock_setup();
 }

arch/x86/kernel/cpu/mshyperv.c

@@ -227,8 +227,8 @@ static void __init ms_hyperv_init_platform(void)
 	ms_hyperv.misc_features = cpuid_edx(HYPERV_CPUID_FEATURES);
 	ms_hyperv.hints    = cpuid_eax(HYPERV_CPUID_ENLIGHTMENT_INFO);
 
-	pr_info("Hyper-V: features 0x%x, hints 0x%x\n",
-		ms_hyperv.features, ms_hyperv.hints);
+	pr_info("Hyper-V: features 0x%x, hints 0x%x, misc 0x%x\n",
+		ms_hyperv.features, ms_hyperv.hints, ms_hyperv.misc_features);
 
 	ms_hyperv.max_vp_index = cpuid_eax(HYPERV_CPUID_IMPLEMENT_LIMITS);
 	ms_hyperv.max_lp_index = cpuid_ebx(HYPERV_CPUID_IMPLEMENT_LIMITS);
@@ -263,6 +263,16 @@ static void __init ms_hyperv_init_platform(void)
 			cpuid_eax(HYPERV_CPUID_NESTED_FEATURES);
 	}
 
+	/*
+	 * Hyper-V expects to get crash register data or kmsg when
+	 * crash enlightment is available and system crashes. Set
+	 * crash_kexec_post_notifiers to be true to make sure that
+	 * calling crash enlightment interface before running kdump
+	 * kernel.
+	 */
+	if (ms_hyperv.misc_features & HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE)
+		crash_kexec_post_notifiers = true;
+
 #ifdef CONFIG_X86_LOCAL_APIC
 	if (ms_hyperv.features & HV_X64_ACCESS_FREQUENCY_MSRS &&
 	    ms_hyperv.misc_features & HV_FEATURE_FREQUENCY_MSRS_AVAILABLE) {

arch/x86/kernel/cpu/resctrl/core.c

@@ -578,6 +578,8 @@ static void domain_add_cpu(int cpu, struct rdt_resource *r)
 	d->id = id;
 	cpumask_set_cpu(cpu, &d->cpu_mask);
 
+	rdt_domain_reconfigure_cdp(r);
+
 	if (r->alloc_capable && domain_setup_ctrlval(r, d)) {
 		kfree(d);
 		return;

arch/x86/kernel/cpu/resctrl/internal.h

@@ -601,5 +601,6 @@ bool has_busy_rmid(struct rdt_resource *r, struct rdt_domain *d);
 void __check_limbo(struct rdt_domain *d, bool force_free);
 bool cbm_validate_intel(char *buf, u32 *data, struct rdt_resource *r);
 bool cbm_validate_amd(char *buf, u32 *data, struct rdt_resource *r);
+void rdt_domain_reconfigure_cdp(struct rdt_resource *r);
 
 #endif /* _ASM_X86_RESCTRL_INTERNAL_H */

arch/x86/kernel/cpu/resctrl/rdtgroup.c

@@ -1859,6 +1859,19 @@ static int set_cache_qos_cfg(int level, bool enable)
 	return 0;
 }
 
+/* Restore the qos cfg state when a domain comes online */
+void rdt_domain_reconfigure_cdp(struct rdt_resource *r)
+{
+	if (!r->alloc_capable)
+		return;
+
+	if (r == &rdt_resources_all[RDT_RESOURCE_L2DATA])
+		l2_qos_cfg_update(&r->alloc_enabled);
+
+	if (r == &rdt_resources_all[RDT_RESOURCE_L3DATA])
+		l3_qos_cfg_update(&r->alloc_enabled);
+}
+
 /*
  * Enable or disable the MBA software controller
  * which helps user specify bandwidth in MBps.
@@ -3072,7 +3085,8 @@ static int rdtgroup_rmdir(struct kernfs_node *kn)
 	 * If the rdtgroup is a mon group and parent directory
 	 * is a valid "mon_groups" directory, remove the mon group.
 	 */
-	if (rdtgrp->type == RDTCTRL_GROUP && parent_kn == rdtgroup_default.kn) {
+	if (rdtgrp->type == RDTCTRL_GROUP && parent_kn == rdtgroup_default.kn &&
+	    rdtgrp != &rdtgroup_default) {
 		if (rdtgrp->mode == RDT_MODE_PSEUDO_LOCKSETUP ||
 		    rdtgrp->mode == RDT_MODE_PSEUDO_LOCKED) {
 			ret = rdtgroup_ctrl_remove(kn, rdtgrp);

arch/x86/kernel/umip.c

@@ -81,7 +81,7 @@
 #define	UMIP_INST_SLDT  3       /* 0F 00 /0 */
 #define	UMIP_INST_STR   4       /* 0F 00 /1 */
 
-const char * const umip_insns[5] = {
+static const char * const umip_insns[5] = {
 	[UMIP_INST_SGDT] = "SGDT",
 	[UMIP_INST_SIDT] = "SIDT",
 	[UMIP_INST_SMSW] = "SMSW",

arch/x86/platform/efi/efi_64.c

@@ -202,7 +202,7 @@ virt_to_phys_or_null_size(void *va, unsigned long size)
 
 int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)
 {
-	unsigned long pfn, text, pf;
+	unsigned long pfn, text, pf, rodata;
 	struct page *page;
 	unsigned npages;
 	pgd_t *pgd = efi_mm.pgd;
@@ -256,7 +256,7 @@ int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)
 
 	efi_scratch.phys_stack = page_to_phys(page + 1); /* stack grows down */
 
-	npages = (__end_rodata_aligned - _text) >> PAGE_SHIFT;
+	npages = (_etext - _text) >> PAGE_SHIFT;
 	text = __pa(_text);
 	pfn = text >> PAGE_SHIFT;
 
@@ -266,6 +266,14 @@ int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)
 		return 1;
 	}
 
+	npages = (__end_rodata - __start_rodata) >> PAGE_SHIFT;
+	rodata = __pa(__start_rodata);
+	pfn = rodata >> PAGE_SHIFT;
+	if (kernel_map_pages_in_pgd(pgd, pfn, rodata, npages, pf)) {
+		pr_err("Failed to map kernel rodata 1:1\n");
+		return 1;
+	}
+
 	return 0;
 }
 
@@ -638,7 +646,7 @@ efi_thunk_set_variable(efi_char16_t *name, efi_guid_t *vendor,
 	phys_vendor = virt_to_phys_or_null(vnd);
 	phys_data = virt_to_phys_or_null_size(data, data_size);
 
-	if (!phys_name || !phys_data)
+	if (!phys_name || (data && !phys_data))
 		status = EFI_INVALID_PARAMETER;
 	else
 		status = efi_thunk(set_variable, phys_name, phys_vendor,
@@ -669,7 +677,7 @@ efi_thunk_set_variable_nonblocking(efi_char16_t *name, efi_guid_t *vendor,
 	phys_vendor = virt_to_phys_or_null(vnd);
 	phys_data = virt_to_phys_or_null_size(data, data_size);
 
-	if (!phys_name || !phys_data)
+	if (!phys_name || (data && !phys_data))
 		status = EFI_INVALID_PARAMETER;
 	else
 		status = efi_thunk(set_variable, phys_name, phys_vendor,

block/blk-mq.c

@@ -1222,8 +1222,10 @@ bool blk_mq_dispatch_rq_list(struct request_queue *q, struct list_head *list,
 		rq = list_first_entry(list, struct request, queuelist);
 
 		hctx = rq->mq_hctx;
-		if (!got_budget && !blk_mq_get_dispatch_budget(hctx))
+		if (!got_budget && !blk_mq_get_dispatch_budget(hctx)) {
+			blk_mq_put_driver_tag(rq);
 			break;
+		}
 
 		if (!blk_mq_get_driver_tag(rq)) {
 			/*

block/blk-wbt.c

@@ -313,7 +313,7 @@ static void scale_up(struct rq_wb *rwb)
 	calc_wb_limits(rwb);
 	rwb->unknown_cnt = 0;
 	rwb_wake_all(rwb);
-	rwb_trace_step(rwb, "scale up");
+	rwb_trace_step(rwb, tracepoint_string("scale up"));
 }
 
 static void scale_down(struct rq_wb *rwb, bool hard_throttle)
@@ -322,7 +322,7 @@ static void scale_down(struct rq_wb *rwb, bool hard_throttle)
 		return;
 	calc_wb_limits(rwb);
 	rwb->unknown_cnt = 0;
-	rwb_trace_step(rwb, "scale down");
+	rwb_trace_step(rwb, tracepoint_string("scale down"));
 }
 
 static void rwb_arm_timer(struct rq_wb *rwb)

drivers/ata/ahci.c

@@ -410,6 +410,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x22a3), board_ahci_mobile }, /* Cherry Tr. AHCI */
 	{ PCI_VDEVICE(INTEL, 0x5ae3), board_ahci_mobile }, /* ApolloLake AHCI */
 	{ PCI_VDEVICE(INTEL, 0x34d3), board_ahci_mobile }, /* Ice Lake LP AHCI */
+	{ PCI_VDEVICE(INTEL, 0x02d3), board_ahci_mobile }, /* Comet Lake PCH-U AHCI */
 	{ PCI_VDEVICE(INTEL, 0x02d7), board_ahci_mobile }, /* Comet Lake PCH RAID */
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */

drivers/block/rbd.c

@@ -3754,11 +3754,7 @@ static int __rbd_notify_op_lock(struct rbd_device *rbd_dev,
 static void rbd_notify_op_lock(struct rbd_device *rbd_dev,
 			       enum rbd_notify_op notify_op)
 {
-	struct page **reply_pages;
-	size_t reply_len;
-
-	__rbd_notify_op_lock(rbd_dev, notify_op, &reply_pages, &reply_len);
-	ceph_release_page_vector(reply_pages, calc_pages_for(0, reply_len));
+	__rbd_notify_op_lock(rbd_dev, notify_op, NULL, NULL);
 }
 
 static void rbd_notify_acquired_lock(struct work_struct *work)
@@ -4527,6 +4523,10 @@ static void cancel_tasks_sync(struct rbd_device *rbd_dev)
 	cancel_work_sync(&rbd_dev->unlock_work);
 }
 
+/*
+ * header_rwsem must not be held to avoid a deadlock with
+ * rbd_dev_refresh() when flushing notifies.
+ */
 static void rbd_unregister_watch(struct rbd_device *rbd_dev)
 {
 	cancel_tasks_sync(rbd_dev);
@@ -6894,9 +6894,10 @@ static void rbd_print_dne(struct rbd_device *rbd_dev, bool is_snap)
 
 static void rbd_dev_image_release(struct rbd_device *rbd_dev)
 {
-	rbd_dev_unprobe(rbd_dev);
-	if (rbd_dev->opts)
+	if (!rbd_is_ro(rbd_dev))
 		rbd_unregister_watch(rbd_dev);
+
+	rbd_dev_unprobe(rbd_dev);
 	rbd_dev->image_format = 0;
 	kfree(rbd_dev->spec->image_id);
 	rbd_dev->spec->image_id = NULL;
@@ -6907,6 +6908,9 @@ static void rbd_dev_image_release(struct rbd_device *rbd_dev)
  * device.  If this image is the one being mapped (i.e., not a
  * parent), initiate a watch on its header object before using that
  * object to get detailed information about the rbd image.
+ *
+ * On success, returns with header_rwsem held for write if called
+ * with @depth == 0.
  */
 static int rbd_dev_image_probe(struct rbd_device *rbd_dev, int depth)
 {
@@ -6936,11 +6940,14 @@ static int rbd_dev_image_probe(struct rbd_device *rbd_dev, int depth)
 		}
 	}
 
+	if (!depth)
+		down_write(&rbd_dev->header_rwsem);
+
 	ret = rbd_dev_header_info(rbd_dev);
 	if (ret) {
 		if (ret == -ENOENT && !need_watch)
 			rbd_print_dne(rbd_dev, false);
-		goto err_out_watch;
+		goto err_out_probe;
 	}
 
 	/*
@@ -6985,10 +6992,11 @@ static int rbd_dev_image_probe(struct rbd_device *rbd_dev, int depth)
 	return 0;
 
 err_out_probe:
-	rbd_dev_unprobe(rbd_dev);
-err_out_watch:
+	if (!depth)
+		up_write(&rbd_dev->header_rwsem);
 	if (need_watch)
 		rbd_unregister_watch(rbd_dev);
+	rbd_dev_unprobe(rbd_dev);
 err_out_format:
 	rbd_dev->image_format = 0;
 	kfree(rbd_dev->spec->image_id);
@@ -7050,12 +7058,9 @@ static ssize_t do_rbd_add(struct bus_type *bus,
 		goto err_out_rbd_dev;
 	}
 
-	down_write(&rbd_dev->header_rwsem);
 	rc = rbd_dev_image_probe(rbd_dev, 0);
-	if (rc < 0) {
-		up_write(&rbd_dev->header_rwsem);
+	if (rc < 0)
 		goto err_out_rbd_dev;
-	}
 
 	if (rbd_dev->opts->alloc_size > rbd_dev->layout.object_size) {
 		rbd_warn(rbd_dev, "alloc_size adjusted to %u",

drivers/clk/clk-asm9260.c

@@ -276,7 +276,7 @@ static void __init asm9260_acc_init(struct device_node *np)
 
 	/* TODO: Convert to DT parent scheme */
 	ref_clk = of_clk_get_parent_name(np, 0);
-	hw = __clk_hw_register_fixed_rate_with_accuracy(NULL, NULL, pll_clk,
+	hw = __clk_hw_register_fixed_rate(NULL, NULL, pll_clk,
 			ref_clk, NULL, NULL, 0, rate, 0,
 			CLK_FIXED_RATE_PARENT_ACCURACY);
 

drivers/clk/mmp/clk-pll.c

@@ -97,7 +97,7 @@ static const struct clk_ops mmp_clk_pll_ops = {
 	.recalc_rate = mmp_clk_pll_recalc_rate,
 };
 
-struct clk *mmp_clk_register_pll(char *name,
+static struct clk *mmp_clk_register_pll(char *name,
 			unsigned long default_rate,
 			void __iomem *enable_reg, u32 enable,
 			void __iomem *reg, u8 shift,
@@ -137,3 +137,34 @@ struct clk *mmp_clk_register_pll(char *name,
 
 	return clk;
 }
+
+void mmp_register_pll_clks(struct mmp_clk_unit *unit,
+			struct mmp_param_pll_clk *clks,
+			void __iomem *base, int size)
+{
+	struct clk *clk;
+	int i;
+
+	for (i = 0; i < size; i++) {
+		void __iomem *reg = NULL;
+
+		if (clks[i].offset)
+			reg = base + clks[i].offset;
+
+		clk = mmp_clk_register_pll(clks[i].name,
+					clks[i].default_rate,
+					base + clks[i].enable_offset,
+					clks[i].enable,
+					reg, clks[i].shift,
+					clks[i].input_rate,
+					base + clks[i].postdiv_offset,
+					clks[i].postdiv_shift);
+		if (IS_ERR(clk)) {
+			pr_err("%s: failed to register clock %s\n",
+			       __func__, clks[i].name);
+			continue;
+		}
+		if (clks[i].id)
+			unit->clk_table[clks[i].id] = clk;
+	}
+}

drivers/clk/mmp/clk.c

@@ -176,37 +176,6 @@ void mmp_register_div_clks(struct mmp_clk_unit *unit,
 	}
 }
 
-void mmp_register_pll_clks(struct mmp_clk_unit *unit,
-			struct mmp_param_pll_clk *clks,
-			void __iomem *base, int size)
-{
-	struct clk *clk;
-	int i;
-
-	for (i = 0; i < size; i++) {
-		void __iomem *reg = NULL;
-
-		if (clks[i].offset)
-			reg = base + clks[i].offset;
-
-		clk = mmp_clk_register_pll(clks[i].name,
-					clks[i].default_rate,
-					base + clks[i].enable_offset,
-					clks[i].enable,
-					reg, clks[i].shift,
-					clks[i].input_rate,
-					base + clks[i].postdiv_offset,
-					clks[i].postdiv_shift);
-		if (IS_ERR(clk)) {
-			pr_err("%s: failed to register clock %s\n",
-			       __func__, clks[i].name);
-			continue;
-		}
-		if (clks[i].id)
-			unit->clk_table[clks[i].id] = clk;
-	}
-}
-
 void mmp_clk_add(struct mmp_clk_unit *unit, unsigned int id,
 			struct clk *clk)
 {

drivers/clk/mmp/clk.h

@@ -238,13 +238,6 @@ void mmp_register_pll_clks(struct mmp_clk_unit *unit,
 			struct mmp_param_pll_clk *clks,
 			void __iomem *base, int size);
 
-extern struct clk *mmp_clk_register_pll(char *name,
-			unsigned long default_rate,
-			void __iomem *enable_reg, u32 enable,
-			void __iomem *reg, u8 shift,
-			unsigned long input_rate,
-			void __iomem *postdiv_reg, u8 postdiv_shift);
-
 #define DEFINE_MIX_REG_INFO(w_d, s_d, w_m, s_m, fc)	\
 {							\
 	.width_div = (w_d),				\

drivers/clk/sprd/sc9863a-clk.c

@@ -1641,8 +1641,9 @@ static SPRD_SC_GATE_CLK_FW_NAME(i2c4_eb,	"i2c4-eb",	"ext-26m", 0x0,
 				0x1000, BIT(12), 0, 0);
 static SPRD_SC_GATE_CLK_FW_NAME(uart0_eb,	"uart0-eb",	"ext-26m", 0x0,
 				0x1000, BIT(13), 0, 0);
+/* uart1_eb is for console, don't gate even if unused */
 static SPRD_SC_GATE_CLK_FW_NAME(uart1_eb,	"uart1-eb",	"ext-26m", 0x0,
-				0x1000, BIT(14), 0, 0);
+				0x1000, BIT(14), CLK_IGNORE_UNUSED, 0);
 static SPRD_SC_GATE_CLK_FW_NAME(uart2_eb,	"uart2-eb",	"ext-26m", 0x0,
 				0x1000, BIT(15), 0, 0);
 static SPRD_SC_GATE_CLK_FW_NAME(uart3_eb,	"uart3-eb",	"ext-26m", 0x0,

drivers/firmware/efi/cper.c

@@ -101,7 +101,7 @@ void cper_print_bits(const char *pfx, unsigned int bits,
 		if (!len)
 			len = snprintf(buf, sizeof(buf), "%s%s", pfx, str);
 		else
-			len += snprintf(buf+len, sizeof(buf)-len, ", %s", str);
+			len += scnprintf(buf+len, sizeof(buf)-len, ", %s", str);
 	}
 	if (len)
 		printk("%s\n", buf);

drivers/firmware/efi/libstub/efistub.h

@@ -25,7 +25,7 @@
 #define EFI_ALLOC_ALIGN		EFI_PAGE_SIZE
 #endif
 
-#ifdef CONFIG_ARM
+#if defined(CONFIG_ARM) || defined(CONFIG_X86)
 #define __efistub_global	__section(.data)
 #else
 #define __efistub_global

drivers/firmware/efi/libstub/file.c

@@ -29,30 +29,31 @@
  */
 #define EFI_READ_CHUNK_SIZE	SZ_1M
 
+struct finfo {
+	efi_file_info_t info;
+	efi_char16_t	filename[MAX_FILENAME_SIZE];
+};
+
 static efi_status_t efi_open_file(efi_file_protocol_t *volume,
-				  efi_char16_t *filename_16,
+				  struct finfo *fi,
 				  efi_file_protocol_t **handle,
 				  unsigned long *file_size)
 {
-	struct {
-		efi_file_info_t info;
-		efi_char16_t	filename[MAX_FILENAME_SIZE];
-	} finfo;
 	efi_guid_t info_guid = EFI_FILE_INFO_ID;
 	efi_file_protocol_t *fh;
 	unsigned long info_sz;
 	efi_status_t status;
 
-	status = volume->open(volume, &fh, filename_16, EFI_FILE_MODE_READ, 0);
+	status = volume->open(volume, &fh, fi->filename, EFI_FILE_MODE_READ, 0);
 	if (status != EFI_SUCCESS) {
 		pr_efi_err("Failed to open file: ");
-		efi_char16_printk(filename_16);
+		efi_char16_printk(fi->filename);
 		efi_printk("\n");
 		return status;
 	}
 
-	info_sz = sizeof(finfo);
-	status = fh->get_info(fh, &info_guid, &info_sz, &finfo);
+	info_sz = sizeof(struct finfo);
+	status = fh->get_info(fh, &info_guid, &info_sz, fi);
 	if (status != EFI_SUCCESS) {
 		pr_efi_err("Failed to get file info\n");
 		fh->close(fh);
@@ -60,7 +61,7 @@ static efi_status_t efi_open_file(efi_file_protocol_t *volume,
 	}
 
 	*handle = fh;
-	*file_size = finfo.info.file_size;
+	*file_size = fi->info.file_size;
 	return EFI_SUCCESS;
 }
 
@@ -146,13 +147,13 @@ static efi_status_t handle_cmdline_files(efi_loaded_image_t *image,
 
 	alloc_addr = alloc_size = 0;
 	do {
-		efi_char16_t filename[MAX_FILENAME_SIZE];
+		struct finfo fi;
 		unsigned long size;
 		void *addr;
 
 		offset = find_file_option(cmdline, cmdline_len,
 					  optstr, optstr_size,
-					  filename, ARRAY_SIZE(filename));
+					  fi.filename, ARRAY_SIZE(fi.filename));
 
 		if (!offset)
 			break;
@@ -166,7 +167,7 @@ static efi_status_t handle_cmdline_files(efi_loaded_image_t *image,
 				return status;
 		}
 
-		status = efi_open_file(volume, filename, &file, &size);
+		status = efi_open_file(volume, &fi, &file, &size);
 		if (status != EFI_SUCCESS)
 			goto err_close_volume;
 

drivers/firmware/efi/libstub/x86-stub.c

@@ -20,7 +20,7 @@
 /* Maximum physical address for 64-bit kernel with 4-level paging */
 #define MAXMEM_X86_64_4LEVEL (1ull << 46)
 
-static efi_system_table_t *sys_table;
+static efi_system_table_t *sys_table __efistub_global;
 extern const bool efi_is64;
 extern u32 image_offset;
 
@@ -392,8 +392,6 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
 	image_base = efi_table_attr(image, image_base);
 	image_offset = (void *)startup_32 - image_base;
 
-	hdr = &((struct boot_params *)image_base)->hdr;
-
 	status = efi_allocate_pages(0x4000, (unsigned long *)&boot_params, ULONG_MAX);
 	if (status != EFI_SUCCESS) {
 		efi_printk("Failed to allocate lowmem for boot params\n");
@@ -742,8 +740,15 @@ unsigned long efi_main(efi_handle_t handle,
 	 * now use KERNEL_IMAGE_SIZE, which will be 512MiB, the same as what
 	 * KASLR uses.
 	 *
-	 * Also relocate it if image_offset is zero, i.e. we weren't loaded by
-	 * LoadImage, but we are not aligned correctly.
+	 * Also relocate it if image_offset is zero, i.e. the kernel wasn't
+	 * loaded by LoadImage, but rather by a bootloader that called the
+	 * handover entry. The reason we must always relocate in this case is
+	 * to handle the case of systemd-boot booting a unified kernel image,
+	 * which is a PE executable that contains the bzImage and an initrd as
+	 * COFF sections. The initrd section is placed after the bzImage
+	 * without ensuring that there are at least init_size bytes available
+	 * for the bzImage, and thus the compressed kernel's startup code may
+	 * overwrite the initrd unless it is moved out of the way.
 	 */
 
 	buffer_start = ALIGN(bzimage_addr - image_offset,
@@ -753,8 +758,7 @@ unsigned long efi_main(efi_handle_t handle,
 	if ((buffer_start < LOAD_PHYSICAL_ADDR)				     ||
 	    (IS_ENABLED(CONFIG_X86_32) && buffer_end > KERNEL_IMAGE_SIZE)    ||
 	    (IS_ENABLED(CONFIG_X86_64) && buffer_end > MAXMEM_X86_64_4LEVEL) ||
-	    (image_offset == 0 && !IS_ALIGNED(bzimage_addr,
-					      hdr->kernel_alignment))) {
+	    (image_offset == 0)) {
 		status = efi_relocate_kernel(&bzimage_addr,
 					     hdr->init_size, hdr->init_size,
 					     hdr->pref_address,

drivers/gpu/drm/amd/amdgpu/amdgpu_device.c

@@ -2008,8 +2008,24 @@ static void amdgpu_device_fill_reset_magic(struct amdgpu_device *adev)
  */
 static bool amdgpu_device_check_vram_lost(struct amdgpu_device *adev)
 {
-	return !!memcmp(adev->gart.ptr, adev->reset_magic,
-			AMDGPU_RESET_MAGIC_NUM);
+	if (memcmp(adev->gart.ptr, adev->reset_magic,
+			AMDGPU_RESET_MAGIC_NUM))
+		return true;
+
+	if (!adev->in_gpu_reset)
+		return false;
+
+	/*
+	 * For all ASICs with baco/mode1 reset, the VRAM is
+	 * always assumed to be lost.
+	 */
+	switch (amdgpu_asic_reset_method(adev)) {
+	case AMD_RESET_METHOD_BACO:
+	case AMD_RESET_METHOD_MODE1:
+		return true;
+	default:
+		return false;
+	}
 }
 
 /**
@@ -2340,6 +2356,8 @@ static int amdgpu_device_ip_suspend_phase1(struct amdgpu_device *adev)
 {
 	int i, r;
 
+	amdgpu_device_set_pg_state(adev, AMD_PG_STATE_UNGATE);
+	amdgpu_device_set_cg_state(adev, AMD_CG_STATE_UNGATE);
 
 	for (i = adev->num_ip_blocks - 1; i >= 0; i--) {
 		if (!adev->ip_blocks[i].status.valid)

drivers/gpu/drm/amd/amdgpu/cik.c

@@ -1358,8 +1358,6 @@ static int cik_asic_reset(struct amdgpu_device *adev)
 	int r;
 
 	if (cik_asic_reset_method(adev) == AMD_RESET_METHOD_BACO) {
-		if (!adev->in_suspend)
-			amdgpu_inc_vram_lost(adev);
 		r = amdgpu_dpm_baco_reset(adev);
 	} else {
 		r = cik_asic_pci_config_reset(adev);

drivers/gpu/drm/amd/amdgpu/gfx_v10_0.c

@@ -279,7 +279,7 @@ static const struct soc15_reg_golden golden_settings_gc_10_1_2_nv12[] =
 
 #define DEFAULT_SH_MEM_CONFIG \
 	((SH_MEM_ADDRESS_MODE_64 << SH_MEM_CONFIG__ADDRESS_MODE__SHIFT) | \
-	 (SH_MEM_ALIGNMENT_MODE_DWORD << SH_MEM_CONFIG__ALIGNMENT_MODE__SHIFT) | \
+	 (SH_MEM_ALIGNMENT_MODE_UNALIGNED << SH_MEM_CONFIG__ALIGNMENT_MODE__SHIFT) | \
 	 (SH_MEM_RETRY_MODE_ALL << SH_MEM_CONFIG__RETRY_MODE__SHIFT) | \
 	 (3 << SH_MEM_CONFIG__INITIAL_INST_PREFETCH__SHIFT))
 

drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c

@@ -1234,6 +1234,8 @@ struct amdgpu_gfxoff_quirk {
 static const struct amdgpu_gfxoff_quirk amdgpu_gfxoff_quirk_list[] = {
 	/* https://bugzilla.kernel.org/show_bug.cgi?id=204689 */
 	{ 0x1002, 0x15dd, 0x1002, 0x15dd, 0xc8 },
+	/* https://bugzilla.kernel.org/show_bug.cgi?id=207171 */
+	{ 0x1002, 0x15dd, 0x103c, 0x83e7, 0xd3 },
 	{ 0, 0, 0, 0, 0 },
 };
 

drivers/gpu/drm/amd/amdgpu/nv.c

@@ -351,8 +351,6 @@ static int nv_asic_reset(struct amdgpu_device *adev)
 	struct smu_context *smu = &adev->smu;
 
 	if (nv_asic_reset_method(adev) == AMD_RESET_METHOD_BACO) {
-		if (!adev->in_suspend)
-			amdgpu_inc_vram_lost(adev);
 		ret = smu_baco_enter(smu);
 		if (ret)
 			return ret;
@@ -360,8 +358,6 @@ static int nv_asic_reset(struct amdgpu_device *adev)
 		if (ret)
 			return ret;
 	} else {
-		if (!adev->in_suspend)
-			amdgpu_inc_vram_lost(adev);
 		ret = nv_asic_mode1_reset(adev);
 	}
 

drivers/gpu/drm/amd/amdgpu/soc15.c

@@ -569,14 +569,10 @@ static int soc15_asic_reset(struct amdgpu_device *adev)
 
 	switch (soc15_asic_reset_method(adev)) {
 		case AMD_RESET_METHOD_BACO:
-			if (!adev->in_suspend)
-				amdgpu_inc_vram_lost(adev);
 			return soc15_asic_baco_reset(adev);
 		case AMD_RESET_METHOD_MODE2:
 			return amdgpu_dpm_mode2_reset(adev);
 		default:
-			if (!adev->in_suspend)
-				amdgpu_inc_vram_lost(adev);
 			return soc15_asic_mode1_reset(adev);
 	}
 }

drivers/gpu/drm/amd/amdgpu/vi.c

@@ -765,8 +765,6 @@ static int vi_asic_reset(struct amdgpu_device *adev)
 	int r;
 
 	if (vi_asic_reset_method(adev) == AMD_RESET_METHOD_BACO) {
-		if (!adev->in_suspend)
-			amdgpu_inc_vram_lost(adev);
 		r = amdgpu_dpm_baco_reset(adev);
 	} else {
 		r = vi_asic_pci_config_reset(adev);

drivers/gpu/drm/amd/powerplay/hwmgr/smu7_hwmgr.c

@@ -3804,9 +3804,12 @@ static int smu7_trim_single_dpm_states(struct pp_hwmgr *hwmgr,
 {
 	uint32_t i;
 
+	/* force the trim if mclk_switching is disabled to prevent flicker */
+	bool force_trim = (low_limit == high_limit);
 	for (i = 0; i < dpm_table->count; i++) {
 	/*skip the trim if od is enabled*/
-		if (!hwmgr->od_enabled && (dpm_table->dpm_levels[i].value < low_limit
+		if ((!hwmgr->od_enabled || force_trim)
+			&& (dpm_table->dpm_levels[i].value < low_limit
 			|| dpm_table->dpm_levels[i].value > high_limit))
 			dpm_table->dpm_levels[i].enabled = false;
 		else

drivers/gpu/drm/amd/powerplay/smu_v11_0.c

@@ -1718,6 +1718,12 @@ int smu_v11_0_baco_set_state(struct smu_context *smu, enum smu_baco_state state)
 		if (ret)
 			goto out;
 
+		if (ras && ras->supported) {
+			ret = smu_send_smc_msg(smu, SMU_MSG_PrepareMp1ForUnload, NULL);
+			if (ret)
+				goto out;
+		}
+
 		/* clear vbios scratch 6 and 7 for coming asic reinit */
 		WREG32(adev->bios_scratch_reg_offset + 6, 0);
 		WREG32(adev->bios_scratch_reg_offset + 7, 0);

drivers/gpu/drm/i915/gvt/kvmgt.c

@@ -131,6 +131,7 @@ struct kvmgt_vdev {
 	struct work_struct release_work;
 	atomic_t released;
 	struct vfio_device *vfio_device;
+	struct vfio_group *vfio_group;
 };
 
 static inline struct kvmgt_vdev *kvmgt_vdev(struct intel_vgpu *vgpu)
@@ -151,6 +152,7 @@ static void gvt_unpin_guest_page(struct intel_vgpu *vgpu, unsigned long gfn,
 		unsigned long size)
 {
 	struct drm_i915_private *i915 = vgpu->gvt->gt->i915;
+	struct kvmgt_vdev *vdev = kvmgt_vdev(vgpu);
 	int total_pages;
 	int npage;
 	int ret;
@@ -160,7 +162,7 @@ static void gvt_unpin_guest_page(struct intel_vgpu *vgpu, unsigned long gfn,
 	for (npage = 0; npage < total_pages; npage++) {
 		unsigned long cur_gfn = gfn + npage;
 
-		ret = vfio_unpin_pages(mdev_dev(kvmgt_vdev(vgpu)->mdev), &cur_gfn, 1);
+		ret = vfio_group_unpin_pages(vdev->vfio_group, &cur_gfn, 1);
 		drm_WARN_ON(&i915->drm, ret != 1);
 	}
 }
@@ -169,6 +171,7 @@ static void gvt_unpin_guest_page(struct intel_vgpu *vgpu, unsigned long gfn,
 static int gvt_pin_guest_page(struct intel_vgpu *vgpu, unsigned long gfn,
 		unsigned long size, struct page **page)
 {
+	struct kvmgt_vdev *vdev = kvmgt_vdev(vgpu);
 	unsigned long base_pfn = 0;
 	int total_pages;
 	int npage;
@@ -183,8 +186,8 @@ static int gvt_pin_guest_page(struct intel_vgpu *vgpu, unsigned long gfn,
 		unsigned long cur_gfn = gfn + npage;
 		unsigned long pfn;
 
-		ret = vfio_pin_pages(mdev_dev(kvmgt_vdev(vgpu)->mdev), &cur_gfn, 1,
-				     IOMMU_READ | IOMMU_WRITE, &pfn);
+		ret = vfio_group_pin_pages(vdev->vfio_group, &cur_gfn, 1,
+					   IOMMU_READ | IOMMU_WRITE, &pfn);
 		if (ret != 1) {
 			gvt_vgpu_err("vfio_pin_pages failed for gfn 0x%lx, ret %d\n",
 				     cur_gfn, ret);
@@ -792,6 +795,7 @@ static int intel_vgpu_open(struct mdev_device *mdev)
 	struct kvmgt_vdev *vdev = kvmgt_vdev(vgpu);
 	unsigned long events;
 	int ret;
+	struct vfio_group *vfio_group;
 
 	vdev->iommu_notifier.notifier_call = intel_vgpu_iommu_notifier;
 	vdev->group_notifier.notifier_call = intel_vgpu_group_notifier;
@@ -814,6 +818,14 @@ static int intel_vgpu_open(struct mdev_device *mdev)
 		goto undo_iommu;
 	}
 
+	vfio_group = vfio_group_get_external_user_from_dev(mdev_dev(mdev));
+	if (IS_ERR_OR_NULL(vfio_group)) {
+		ret = !vfio_group ? -EFAULT : PTR_ERR(vfio_group);
+		gvt_vgpu_err("vfio_group_get_external_user_from_dev failed\n");
+		goto undo_register;
+	}
+	vdev->vfio_group = vfio_group;
+
 	/* Take a module reference as mdev core doesn't take
 	 * a reference for vendor driver.
 	 */
@@ -830,6 +842,10 @@ static int intel_vgpu_open(struct mdev_device *mdev)
 	return ret;
 
 undo_group:
+	vfio_group_put_external_user(vdev->vfio_group);
+	vdev->vfio_group = NULL;
+
+undo_register:
 	vfio_unregister_notifier(mdev_dev(mdev), VFIO_GROUP_NOTIFY,
 					&vdev->group_notifier);
 
@@ -884,6 +900,7 @@ static void __intel_vgpu_release(struct intel_vgpu *vgpu)
 	kvmgt_guest_exit(info);
 
 	intel_vgpu_release_msi_eventfd_ctx(vgpu);
+	vfio_group_put_external_user(vdev->vfio_group);
 
 	vdev->kvm = NULL;
 	vgpu->handle = 0;
@@ -2035,33 +2052,14 @@ static int kvmgt_rw_gpa(unsigned long handle, unsigned long gpa,
 			void *buf, unsigned long len, bool write)
 {
 	struct kvmgt_guest_info *info;
-	struct kvm *kvm;
-	int idx, ret;
-	bool kthread = current->mm == NULL;
 
 	if (!handle_valid(handle))
 		return -ESRCH;
 
 	info = (struct kvmgt_guest_info *)handle;
-	kvm = info->kvm;
 
-	if (kthread) {
-		if (!mmget_not_zero(kvm->mm))
-			return -EFAULT;
-		use_mm(kvm->mm);
-	}
-
-	idx = srcu_read_lock(&kvm->srcu);
-	ret = write ? kvm_write_guest(kvm, gpa, buf, len) :
-		      kvm_read_guest(kvm, gpa, buf, len);
-	srcu_read_unlock(&kvm->srcu, idx);
-
-	if (kthread) {
-		unuse_mm(kvm->mm);
-		mmput(kvm->mm);
-	}
-
-	return ret;
+	return vfio_dma_rw(kvmgt_vdev(info->vgpu)->vfio_group,
+			   gpa, buf, len, write);
 }
 
 static int kvmgt_read_gpa(unsigned long handle, unsigned long gpa,

drivers/gpu/drm/i915/i915_perf.c

@@ -2940,49 +2940,6 @@ void i915_oa_init_reg_state(const struct intel_context *ce,
 		gen8_update_reg_state_unlocked(ce, stream);
 }
 
-/**
- * i915_perf_read_locked - &i915_perf_stream_ops->read with error normalisation
- * @stream: An i915 perf stream
- * @file: An i915 perf stream file
- * @buf: destination buffer given by userspace
- * @count: the number of bytes userspace wants to read
- * @ppos: (inout) file seek position (unused)
- *
- * Besides wrapping &i915_perf_stream_ops->read this provides a common place to
- * ensure that if we've successfully copied any data then reporting that takes
- * precedence over any internal error status, so the data isn't lost.
- *
- * For example ret will be -ENOSPC whenever there is more buffered data than
- * can be copied to userspace, but that's only interesting if we weren't able
- * to copy some data because it implies the userspace buffer is too small to
- * receive a single record (and we never split records).
- *
- * Another case with ret == -EFAULT is more of a grey area since it would seem
- * like bad form for userspace to ask us to overrun its buffer, but the user
- * knows best:
- *
- *   http://yarchive.net/comp/linux/partial_reads_writes.html
- *
- * Returns: The number of bytes copied or a negative error code on failure.
- */
-static ssize_t i915_perf_read_locked(struct i915_perf_stream *stream,
-				     struct file *file,
-				     char __user *buf,
-				     size_t count,
-				     loff_t *ppos)
-{
-	/* Note we keep the offset (aka bytes read) separate from any
-	 * error status so that the final check for whether we return
-	 * the bytes read with a higher precedence than any error (see
-	 * comment below) doesn't need to be handled/duplicated in
-	 * stream->ops->read() implementations.
-	 */
-	size_t offset = 0;
-	int ret = stream->ops->read(stream, buf, count, &offset);
-
-	return offset ?: (ret ?: -EAGAIN);
-}
-
 /**
  * i915_perf_read - handles read() FOP for i915 perf stream FDs
  * @file: An i915 perf stream file
@@ -3008,7 +2965,8 @@ static ssize_t i915_perf_read(struct file *file,
 {
 	struct i915_perf_stream *stream = file->private_data;
 	struct i915_perf *perf = stream->perf;
-	ssize_t ret;
+	size_t offset = 0;
+	int ret;
 
 	/* To ensure it's handled consistently we simply treat all reads of a
 	 * disabled stream as an error. In particular it might otherwise lead
@@ -3031,13 +2989,12 @@ static ssize_t i915_perf_read(struct file *file,
 				return ret;
 
 			mutex_lock(&perf->lock);
-			ret = i915_perf_read_locked(stream, file,
-						    buf, count, ppos);
+			ret = stream->ops->read(stream, buf, count, &offset);
 			mutex_unlock(&perf->lock);
-		} while (ret == -EAGAIN);
+		} while (!offset && !ret);
 	} else {
 		mutex_lock(&perf->lock);
-		ret = i915_perf_read_locked(stream, file, buf, count, ppos);
+		ret = stream->ops->read(stream, buf, count, &offset);
 		mutex_unlock(&perf->lock);
 	}
 
@@ -3048,15 +3005,15 @@ static ssize_t i915_perf_read(struct file *file,
 	 * and read() returning -EAGAIN. Clearing the oa.pollin state here
 	 * effectively ensures we back off until the next hrtimer callback
 	 * before reporting another EPOLLIN event.
+	 * The exception to this is if ops->read() returned -ENOSPC which means
+	 * that more OA data is available than could fit in the user provided
+	 * buffer. In this case we want the next poll() call to not block.
 	 */
-	if (ret >= 0 || ret == -EAGAIN) {
-		/* Maybe make ->pollin per-stream state if we support multiple
-		 * concurrent streams in the future.
-		 */
+	if (ret != -ENOSPC)
 		stream->pollin = false;
-	}
 
-	return ret;
+	/* Possible values for ret are 0, -EFAULT, -ENOSPC, -EIO, ... */
+	return offset ?: (ret ?: -EAGAIN);
 }
 
 static enum hrtimer_restart oa_poll_check_timer_cb(struct hrtimer *hrtimer)

drivers/gpu/drm/nouveau/nvkm/engine/sec2/gp108.c

@@ -25,6 +25,9 @@
 MODULE_FIRMWARE("nvidia/gp108/sec2/desc.bin");
 MODULE_FIRMWARE("nvidia/gp108/sec2/image.bin");
 MODULE_FIRMWARE("nvidia/gp108/sec2/sig.bin");
+MODULE_FIRMWARE("nvidia/gv100/sec2/desc.bin");
+MODULE_FIRMWARE("nvidia/gv100/sec2/image.bin");
+MODULE_FIRMWARE("nvidia/gv100/sec2/sig.bin");
 
 static const struct nvkm_sec2_fwif
 gp108_sec2_fwif[] = {

drivers/gpu/drm/nouveau/nvkm/engine/sec2/tu102.c

@@ -56,6 +56,22 @@ tu102_sec2_nofw(struct nvkm_sec2 *sec2, int ver,
 	return 0;
 }
 
+MODULE_FIRMWARE("nvidia/tu102/sec2/desc.bin");
+MODULE_FIRMWARE("nvidia/tu102/sec2/image.bin");
+MODULE_FIRMWARE("nvidia/tu102/sec2/sig.bin");
+MODULE_FIRMWARE("nvidia/tu104/sec2/desc.bin");
+MODULE_FIRMWARE("nvidia/tu104/sec2/image.bin");
+MODULE_FIRMWARE("nvidia/tu104/sec2/sig.bin");
+MODULE_FIRMWARE("nvidia/tu106/sec2/desc.bin");
+MODULE_FIRMWARE("nvidia/tu106/sec2/image.bin");
+MODULE_FIRMWARE("nvidia/tu106/sec2/sig.bin");
+MODULE_FIRMWARE("nvidia/tu116/sec2/desc.bin");
+MODULE_FIRMWARE("nvidia/tu116/sec2/image.bin");
+MODULE_FIRMWARE("nvidia/tu116/sec2/sig.bin");
+MODULE_FIRMWARE("nvidia/tu117/sec2/desc.bin");
+MODULE_FIRMWARE("nvidia/tu117/sec2/image.bin");
+MODULE_FIRMWARE("nvidia/tu117/sec2/sig.bin");
+
 static const struct nvkm_sec2_fwif
 tu102_sec2_fwif[] = {
 	{  0, gp102_sec2_load, &tu102_sec2, &gp102_sec2_acr_1 },

drivers/hv/channel_mgmt.c

@@ -839,6 +839,9 @@ void vmbus_initiate_unload(bool crash)
 {
 	struct vmbus_channel_message_header hdr;
 
+	if (xchg(&vmbus_connection.conn_state, DISCONNECTED) == DISCONNECTED)
+		return;
+
 	/* Pre-Win2012R2 hosts don't support reconnect */
 	if (vmbus_proto_version < VERSION_WIN8_1)
 		return;

drivers/hv/hv_debugfs.c

@@ -11,7 +11,7 @@
 
 #include "hyperv_vmbus.h"
 
-struct dentry *hv_debug_root;
+static struct dentry *hv_debug_root;
 
 static int hv_debugfs_delay_get(void *data, u64 *val)
 {

drivers/hv/hyperv_vmbus.h

@@ -292,7 +292,7 @@ struct vmbus_msginfo {
 	struct list_head msglist_entry;
 
 	/* The message itself */
-	unsigned char msg[0];
+	unsigned char msg[];
 };
 
 

drivers/hv/vmbus_drv.c

@@ -31,6 +31,7 @@
 #include <linux/kdebug.h>
 #include <linux/efi.h>
 #include <linux/random.h>
+#include <linux/kernel.h>
 #include <linux/syscore_ops.h>
 #include <clocksource/hyperv_timer.h>
 #include "hyperv_vmbus.h"
@@ -48,14 +49,35 @@ static int hyperv_cpuhp_online;
 
 static void *hv_panic_page;
 
+/*
+ * Boolean to control whether to report panic messages over Hyper-V.
+ *
+ * It can be set via /proc/sys/kernel/hyperv/record_panic_msg
+ */
+static int sysctl_record_panic_msg = 1;
+
+static int hyperv_report_reg(void)
+{
+	return !sysctl_record_panic_msg || !hv_panic_page;
+}
+
 static int hyperv_panic_event(struct notifier_block *nb, unsigned long val,
 			      void *args)
 {
 	struct pt_regs *regs;
 
-	regs = current_pt_regs();
+	vmbus_initiate_unload(true);
 
-	hyperv_report_panic(regs, val);
+	/*
+	 * Hyper-V should be notified only once about a panic.  If we will be
+	 * doing hyperv_report_panic_msg() later with kmsg data, don't do
+	 * the notification here.
+	 */
+	if (ms_hyperv.misc_features & HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE
+	    && hyperv_report_reg()) {
+		regs = current_pt_regs();
+		hyperv_report_panic(regs, val, false);
+	}
 	return NOTIFY_DONE;
 }
 
@@ -65,7 +87,13 @@ static int hyperv_die_event(struct notifier_block *nb, unsigned long val,
 	struct die_args *die = (struct die_args *)args;
 	struct pt_regs *regs = die->regs;
 
-	hyperv_report_panic(regs, val);
+	/*
+	 * Hyper-V should be notified only once about a panic.  If we will be
+	 * doing hyperv_report_panic_msg() later with kmsg data, don't do
+	 * the notification here.
+	 */
+	if (hyperv_report_reg())
+		hyperv_report_panic(regs, val, true);
 	return NOTIFY_DONE;
 }
 
@@ -1252,13 +1280,6 @@ static void vmbus_isr(void)
 	add_interrupt_randomness(HYPERVISOR_CALLBACK_VECTOR, 0);
 }
 
-/*
- * Boolean to control whether to report panic messages over Hyper-V.
- *
- * It can be set via /proc/sys/kernel/hyperv/record_panic_msg
- */
-static int sysctl_record_panic_msg = 1;
-
 /*
  * Callback from kmsg_dump. Grab as much as possible from the end of the kmsg
  * buffer and call into Hyper-V to transfer the data.
@@ -1382,19 +1403,29 @@ static int vmbus_bus_init(void)
 			hv_panic_page = (void *)hv_alloc_hyperv_zeroed_page();
 			if (hv_panic_page) {
 				ret = kmsg_dump_register(&hv_kmsg_dumper);
-				if (ret)
+				if (ret) {
 					pr_err("Hyper-V: kmsg dump register "
 						"error 0x%x\n", ret);
+					hv_free_hyperv_page(
+					    (unsigned long)hv_panic_page);
+					hv_panic_page = NULL;
+				}
 			} else
 				pr_err("Hyper-V: panic message page memory "
 					"allocation failed");
 		}
 
 		register_die_notifier(&hyperv_die_block);
-		atomic_notifier_chain_register(&panic_notifier_list,
-					       &hyperv_panic_block);
 	}
 
+	/*
+	 * Always register the panic notifier because we need to unload
+	 * the VMbus channel connection to prevent any VMbus
+	 * activity after the VM panics.
+	 */
+	atomic_notifier_chain_register(&panic_notifier_list,
+			       &hyperv_panic_block);
+
 	vmbus_request_offers();
 
 	return 0;
@@ -1407,7 +1438,6 @@ err_alloc:
 	hv_remove_vmbus_irq();
 
 	bus_unregister(&hv_bus);
-	hv_free_hyperv_page((unsigned long)hv_panic_page);
 	unregister_sysctl_table(hv_ctl_table_hdr);
 	hv_ctl_table_hdr = NULL;
 	return ret;
@@ -2204,8 +2234,6 @@ static int vmbus_bus_suspend(struct device *dev)
 
 	vmbus_initiate_unload(false);
 
-	vmbus_connection.conn_state = DISCONNECTED;
-
 	/* Reset the event for the next resume. */
 	reinit_completion(&vmbus_connection.ready_for_resume_event);
 
@@ -2289,7 +2317,6 @@ static void hv_kexec_handler(void)
 {
 	hv_stimer_global_cleanup();
 	vmbus_initiate_unload(false);
-	vmbus_connection.conn_state = DISCONNECTED;
 	/* Make sure conn_state is set as hv_synic_cleanup checks for it */
 	mb();
 	cpuhp_remove_state(hyperv_cpuhp_online);
@@ -2306,7 +2333,6 @@ static void hv_crash_handler(struct pt_regs *regs)
 	 * doing the cleanup for current CPU only. This should be sufficient
 	 * for kdump.
 	 */
-	vmbus_connection.conn_state = DISCONNECTED;
 	cpu = smp_processor_id();
 	hv_stimer_cleanup(cpu);
 	hv_synic_disable_regs(cpu);

drivers/hwmon/Kconfig

@@ -412,7 +412,7 @@ config SENSORS_DRIVETEMP
 	  hard disk drives.
 
 	  This driver can also be built as a module. If so, the module
-	  will be called satatemp.
+	  will be called drivetemp.
 
 config SENSORS_DS620
 	tristate "Dallas Semiconductor DS620"

drivers/hwmon/drivetemp.c

@@ -264,12 +264,18 @@ static int drivetemp_get_scttemp(struct drivetemp_data *st, u32 attr, long *val)
 		return err;
 	switch (attr) {
 	case hwmon_temp_input:
+		if (!temp_is_valid(buf[SCT_STATUS_TEMP]))
+			return -ENODATA;
 		*val = temp_from_sct(buf[SCT_STATUS_TEMP]);
 		break;
 	case hwmon_temp_lowest:
+		if (!temp_is_valid(buf[SCT_STATUS_TEMP_LOWEST]))
+			return -ENODATA;
 		*val = temp_from_sct(buf[SCT_STATUS_TEMP_LOWEST]);
 		break;
 	case hwmon_temp_highest:
+		if (!temp_is_valid(buf[SCT_STATUS_TEMP_HIGHEST]))
+			return -ENODATA;
 		*val = temp_from_sct(buf[SCT_STATUS_TEMP_HIGHEST]);
 		break;
 	default:

drivers/hwmon/jc42.c

@@ -506,7 +506,7 @@ static int jc42_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	}
 	data->config = config;
 
-	hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
+	hwmon_dev = devm_hwmon_device_register_with_info(dev, "jc42",
 							 data, &jc42_chip_info,
 							 NULL);
 	return PTR_ERR_OR_ZERO(hwmon_dev);

drivers/hwmon/k10temp.c

@@ -186,7 +186,7 @@ static long get_raw_temp(struct k10temp_data *data)
 	return temp;
 }
 
-const char *k10temp_temp_label[] = {
+static const char *k10temp_temp_label[] = {
 	"Tctl",
 	"Tdie",
 	"Tccd1",
@@ -199,12 +199,12 @@ const char *k10temp_temp_label[] = {
 	"Tccd8",
 };
 
-const char *k10temp_in_label[] = {
+static const char *k10temp_in_label[] = {
 	"Vcore",
 	"Vsoc",
 };
 
-const char *k10temp_curr_label[] = {
+static const char *k10temp_curr_label[] = {
 	"Icore",
 	"Isoc",
 };

drivers/hwmon/pmbus/isl68137.c

@@ -21,8 +21,50 @@
 #define ISL68137_VOUT_AVS	0x30
 #define RAA_DMPVR2_READ_VMON	0xc8
 
-enum versions {
+enum chips {
 	isl68137,
+	isl68220,
+	isl68221,
+	isl68222,
+	isl68223,
+	isl68224,
+	isl68225,
+	isl68226,
+	isl68227,
+	isl68229,
+	isl68233,
+	isl68239,
+	isl69222,
+	isl69223,
+	isl69224,
+	isl69225,
+	isl69227,
+	isl69228,
+	isl69234,
+	isl69236,
+	isl69239,
+	isl69242,
+	isl69243,
+	isl69247,
+	isl69248,
+	isl69254,
+	isl69255,
+	isl69256,
+	isl69259,
+	isl69260,
+	isl69268,
+	isl69269,
+	isl69298,
+	raa228000,
+	raa228004,
+	raa228006,
+	raa228228,
+	raa229001,
+	raa229004,
+};
+
+enum variants {
+	raa_dmpvr1_2rail,
 	raa_dmpvr2_1rail,
 	raa_dmpvr2_2rail,
 	raa_dmpvr2_3rail,
@@ -186,7 +228,7 @@ static int isl68137_probe(struct i2c_client *client,
 	memcpy(info, &raa_dmpvr_info, sizeof(*info));
 
 	switch (id->driver_data) {
-	case isl68137:
+	case raa_dmpvr1_2rail:
 		info->pages = 2;
 		info->R[PSC_VOLTAGE_IN] = 3;
 		info->func[0] &= ~PMBUS_HAVE_VMON;
@@ -224,11 +266,47 @@ static int isl68137_probe(struct i2c_client *client,
 }
 
 static const struct i2c_device_id raa_dmpvr_id[] = {
-	{"isl68137", isl68137},
-	{"raa_dmpvr2_1rail", raa_dmpvr2_1rail},
-	{"raa_dmpvr2_2rail", raa_dmpvr2_2rail},
-	{"raa_dmpvr2_3rail", raa_dmpvr2_3rail},
-	{"raa_dmpvr2_hv", raa_dmpvr2_hv},
+	{"isl68137", raa_dmpvr1_2rail},
+	{"isl68220", raa_dmpvr2_2rail},
+	{"isl68221", raa_dmpvr2_3rail},
+	{"isl68222", raa_dmpvr2_2rail},
+	{"isl68223", raa_dmpvr2_2rail},
+	{"isl68224", raa_dmpvr2_3rail},
+	{"isl68225", raa_dmpvr2_2rail},
+	{"isl68226", raa_dmpvr2_3rail},
+	{"isl68227", raa_dmpvr2_1rail},
+	{"isl68229", raa_dmpvr2_3rail},
+	{"isl68233", raa_dmpvr2_2rail},
+	{"isl68239", raa_dmpvr2_3rail},
+
+	{"isl69222", raa_dmpvr2_2rail},
+	{"isl69223", raa_dmpvr2_3rail},
+	{"isl69224", raa_dmpvr2_2rail},
+	{"isl69225", raa_dmpvr2_2rail},
+	{"isl69227", raa_dmpvr2_3rail},
+	{"isl69228", raa_dmpvr2_3rail},
+	{"isl69234", raa_dmpvr2_2rail},
+	{"isl69236", raa_dmpvr2_2rail},
+	{"isl69239", raa_dmpvr2_3rail},
+	{"isl69242", raa_dmpvr2_2rail},
+	{"isl69243", raa_dmpvr2_1rail},
+	{"isl69247", raa_dmpvr2_2rail},
+	{"isl69248", raa_dmpvr2_2rail},
+	{"isl69254", raa_dmpvr2_2rail},
+	{"isl69255", raa_dmpvr2_2rail},
+	{"isl69256", raa_dmpvr2_2rail},
+	{"isl69259", raa_dmpvr2_2rail},
+	{"isl69260", raa_dmpvr2_2rail},
+	{"isl69268", raa_dmpvr2_2rail},
+	{"isl69269", raa_dmpvr2_3rail},
+	{"isl69298", raa_dmpvr2_2rail},
+
+	{"raa228000", raa_dmpvr2_hv},
+	{"raa228004", raa_dmpvr2_hv},
+	{"raa228006", raa_dmpvr2_hv},
+	{"raa228228", raa_dmpvr2_2rail},
+	{"raa229001", raa_dmpvr2_2rail},
+	{"raa229004", raa_dmpvr2_2rail},
 	{}
 };
 

drivers/i2c/busses/i2c-altera.c

@@ -384,7 +384,6 @@ static int altr_i2c_probe(struct platform_device *pdev)
 	struct altr_i2c_dev *idev = NULL;
 	struct resource *res;
 	int irq, ret;
-	u32 val;
 
 	idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL);
 	if (!idev)
@@ -411,17 +410,17 @@ static int altr_i2c_probe(struct platform_device *pdev)
 	init_completion(&idev->msg_complete);
 	spin_lock_init(&idev->lock);
 
-	val = device_property_read_u32(idev->dev, "fifo-size",
+	ret = device_property_read_u32(idev->dev, "fifo-size",
 				       &idev->fifo_size);
-	if (val) {
+	if (ret) {
 		dev_err(&pdev->dev, "FIFO size set to default of %d\n",
 			ALTR_I2C_DFLT_FIFO_SZ);
 		idev->fifo_size = ALTR_I2C_DFLT_FIFO_SZ;
 	}
 
-	val = device_property_read_u32(idev->dev, "clock-frequency",
+	ret = device_property_read_u32(idev->dev, "clock-frequency",
 				       &idev->bus_clk_rate);
-	if (val) {
+	if (ret) {
 		dev_err(&pdev->dev, "Default to 100kHz\n");
 		idev->bus_clk_rate = I2C_MAX_STANDARD_MODE_FREQ;	/* default clock rate */
 	}

drivers/i2c/busses/i2c-designware-platdrv.c

@@ -354,10 +354,16 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	adap->dev.of_node = pdev->dev.of_node;
 	adap->nr = -1;
 
-	dev_pm_set_driver_flags(&pdev->dev,
-				DPM_FLAG_SMART_PREPARE |
-				DPM_FLAG_SMART_SUSPEND |
-				DPM_FLAG_LEAVE_SUSPENDED);
+	if (dev->flags & ACCESS_NO_IRQ_SUSPEND) {
+		dev_pm_set_driver_flags(&pdev->dev,
+					DPM_FLAG_SMART_PREPARE |
+					DPM_FLAG_LEAVE_SUSPENDED);
+	} else {
+		dev_pm_set_driver_flags(&pdev->dev,
+					DPM_FLAG_SMART_PREPARE |
+					DPM_FLAG_SMART_SUSPEND |
+					DPM_FLAG_LEAVE_SUSPENDED);
+	}
 
 	/* The code below assumes runtime PM to be disabled. */
 	WARN_ON(pm_runtime_enabled(&pdev->dev));

drivers/i2c/busses/i2c-tegra.c

@@ -996,14 +996,13 @@ tegra_i2c_poll_completion_timeout(struct tegra_i2c_dev *i2c_dev,
 	do {
 		u32 status = i2c_readl(i2c_dev, I2C_INT_STATUS);
 
-		if (status) {
+		if (status)
 			tegra_i2c_isr(i2c_dev->irq, i2c_dev);
 
-			if (completion_done(complete)) {
-				s64 delta = ktime_ms_delta(ktimeout, ktime);
+		if (completion_done(complete)) {
+			s64 delta = ktime_ms_delta(ktimeout, ktime);
 
-				return msecs_to_jiffies(delta) ?: 1;
-			}
+			return msecs_to_jiffies(delta) ?: 1;
 		}
 
 		ktime = ktime_get();
@@ -1030,14 +1029,18 @@ tegra_i2c_wait_completion_timeout(struct tegra_i2c_dev *i2c_dev,
 		disable_irq(i2c_dev->irq);
 
 		/*
-		 * There is a chance that completion may happen after IRQ
-		 * synchronization, which is done by disable_irq().
+		 * Under some rare circumstances (like running KASAN +
+		 * NFS root) CPU, which handles interrupt, may stuck in
+		 * uninterruptible state for a significant time.  In this
+		 * case we will get timeout if I2C transfer is running on
+		 * a sibling CPU, despite of IRQ being raised.
+		 *
+		 * In order to handle this rare condition, the IRQ status
+		 * needs to be checked after timeout.
 		 */
-		if (ret == 0 && completion_done(complete)) {
-			dev_warn(i2c_dev->dev,
-				 "completion done after timeout\n");
-			ret = 1;
-		}
+		if (ret == 0)
+			ret = tegra_i2c_poll_completion_timeout(i2c_dev,
+								complete, 0);
 	}
 
 	return ret;
@@ -1216,6 +1219,15 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 		time_left = tegra_i2c_wait_completion_timeout(
 				i2c_dev, &i2c_dev->dma_complete, xfer_time);
 
+		/*
+		 * Synchronize DMA first, since dmaengine_terminate_sync()
+		 * performs synchronization after the transfer's termination
+		 * and we want to get a completion if transfer succeeded.
+		 */
+		dmaengine_synchronize(i2c_dev->msg_read ?
+				      i2c_dev->rx_dma_chan :
+				      i2c_dev->tx_dma_chan);
+
 		dmaengine_terminate_sync(i2c_dev->msg_read ?
 					 i2c_dev->rx_dma_chan :
 					 i2c_dev->tx_dma_chan);

drivers/i2c/i2c-core-base.c

@@ -2273,19 +2273,6 @@ i2c_new_scanned_device(struct i2c_adapter *adap,
 }
 EXPORT_SYMBOL_GPL(i2c_new_scanned_device);
 
-struct i2c_client *
-i2c_new_probed_device(struct i2c_adapter *adap,
-		      struct i2c_board_info *info,
-		      unsigned short const *addr_list,
-		      int (*probe)(struct i2c_adapter *adap, unsigned short addr))
-{
-	struct i2c_client *client;
-
-	client = i2c_new_scanned_device(adap, info, addr_list, probe);
-	return IS_ERR(client) ? NULL : client;
-}
-EXPORT_SYMBOL_GPL(i2c_new_probed_device);
-
 struct i2c_adapter *i2c_get_adapter(int nr)
 {
 	struct i2c_adapter *adapter;

drivers/irqchip/irq-bcm7038-l1.c

@@ -416,7 +416,7 @@ static const struct irq_domain_ops bcm7038_l1_domain_ops = {
 	.map			= bcm7038_l1_map,
 };
 
-int __init bcm7038_l1_of_init(struct device_node *dn,
+static int __init bcm7038_l1_of_init(struct device_node *dn,
 			      struct device_node *parent)
 {
 	struct bcm7038_l1_chip *intc;

drivers/irqchip/irq-gic-v3-its.c

@@ -14,6 +14,7 @@
 #include <linux/dma-iommu.h>
 #include <linux/efi.h>
 #include <linux/interrupt.h>
+#include <linux/iopoll.h>
 #include <linux/irqdomain.h>
 #include <linux/list.h>
 #include <linux/log2.h>
@@ -3672,6 +3673,20 @@ out:
 	return IRQ_SET_MASK_OK_DONE;
 }
 
+static void its_wait_vpt_parse_complete(void)
+{
+	void __iomem *vlpi_base = gic_data_rdist_vlpi_base();
+	u64 val;
+
+	if (!gic_rdists->has_vpend_valid_dirty)
+		return;
+
+	WARN_ON_ONCE(readq_relaxed_poll_timeout(vlpi_base + GICR_VPENDBASER,
+						val,
+						!(val & GICR_VPENDBASER_Dirty),
+						10, 500));
+}
+
 static void its_vpe_schedule(struct its_vpe *vpe)
 {
 	void __iomem *vlpi_base = gic_data_rdist_vlpi_base();
@@ -3702,6 +3717,8 @@ static void its_vpe_schedule(struct its_vpe *vpe)
 	val |= vpe->idai ? GICR_VPENDBASER_IDAI : 0;
 	val |= GICR_VPENDBASER_Valid;
 	gicr_write_vpendbaser(val, vlpi_base + GICR_VPENDBASER);
+
+	its_wait_vpt_parse_complete();
 }
 
 static void its_vpe_deschedule(struct its_vpe *vpe)
@@ -3910,6 +3927,8 @@ static void its_vpe_4_1_schedule(struct its_vpe *vpe,
 	val |= FIELD_PREP(GICR_VPENDBASER_4_1_VPEID, vpe->vpe_id);
 
 	gicr_write_vpendbaser(val, vlpi_base + GICR_VPENDBASER);
+
+	its_wait_vpt_parse_complete();
 }
 
 static void its_vpe_4_1_deschedule(struct its_vpe *vpe,
@@ -4035,6 +4054,7 @@ static int its_sgi_set_affinity(struct irq_data *d,
 	 * not on the host (since they can only be targetting a vPE).
 	 * Tell the kernel we've done whatever it asked for.
 	 */
+	irq_data_update_effective_affinity(d, mask_val);
 	return IRQ_SET_MASK_OK;
 }
 

drivers/irqchip/irq-gic-v3.c

@@ -873,6 +873,7 @@ static int __gic_update_rdist_properties(struct redist_region *region,
 	gic_data.rdists.has_rvpeid &= !!(typer & GICR_TYPER_RVPEID);
 	gic_data.rdists.has_direct_lpi &= (!!(typer & GICR_TYPER_DirectLPIS) |
 					   gic_data.rdists.has_rvpeid);
+	gic_data.rdists.has_vpend_valid_dirty &= !!(typer & GICR_TYPER_DIRTY);
 
 	/* Detect non-sensical configurations */
 	if (WARN_ON_ONCE(gic_data.rdists.has_rvpeid && !gic_data.rdists.has_vlpis)) {
@@ -893,10 +894,11 @@ static void gic_update_rdist_properties(void)
 	if (WARN_ON(gic_data.ppi_nr == UINT_MAX))
 		gic_data.ppi_nr = 0;
 	pr_info("%d PPIs implemented\n", gic_data.ppi_nr);
-	pr_info("%sVLPI support, %sdirect LPI support, %sRVPEID support\n",
-		!gic_data.rdists.has_vlpis ? "no " : "",
-		!gic_data.rdists.has_direct_lpi ? "no " : "",
-		!gic_data.rdists.has_rvpeid ? "no " : "");
+	if (gic_data.rdists.has_vlpis)
+		pr_info("GICv4 features: %s%s%s\n",
+			gic_data.rdists.has_direct_lpi ? "DirectLPI " : "",
+			gic_data.rdists.has_rvpeid ? "RVPEID " : "",
+			gic_data.rdists.has_vpend_valid_dirty ? "Valid+Dirty " : "");
 }
 
 /* Check whether it's single security state view */
@@ -1620,6 +1622,7 @@ static int __init gic_init_bases(void __iomem *dist_base,
 	gic_data.rdists.has_rvpeid = true;
 	gic_data.rdists.has_vlpis = true;
 	gic_data.rdists.has_direct_lpi = true;
+	gic_data.rdists.has_vpend_valid_dirty = true;
 
 	if (WARN_ON(!gic_data.domain) || WARN_ON(!gic_data.rdists.rdist)) {
 		err = -ENOMEM;

drivers/irqchip/irq-mbigen.c

@@ -220,10 +220,16 @@ static int mbigen_irq_domain_alloc(struct irq_domain *domain,
 	return 0;
 }
 
+static void mbigen_irq_domain_free(struct irq_domain *domain, unsigned int virq,
+				   unsigned int nr_irqs)
+{
+	platform_msi_domain_free(domain, virq, nr_irqs);
+}
+
 static const struct irq_domain_ops mbigen_domain_ops = {
 	.translate	= mbigen_domain_translate,
 	.alloc		= mbigen_irq_domain_alloc,
-	.free		= irq_domain_free_irqs_common,
+	.free		= mbigen_irq_domain_free,
 };
 
 static int mbigen_of_create_domain(struct platform_device *pdev,

drivers/irqchip/irq-meson-gpio.c

@@ -144,12 +144,17 @@ struct meson_gpio_irq_controller {
 static void meson_gpio_irq_update_bits(struct meson_gpio_irq_controller *ctl,
 				       unsigned int reg, u32 mask, u32 val)
 {
+	unsigned long flags;
 	u32 tmp;
 
+	spin_lock_irqsave(&ctl->lock, flags);
+
 	tmp = readl_relaxed(ctl->base + reg);
 	tmp &= ~mask;
 	tmp |= val;
 	writel_relaxed(tmp, ctl->base + reg);
+
+	spin_unlock_irqrestore(&ctl->lock, flags);
 }
 
 static void meson_gpio_irq_init_dummy(struct meson_gpio_irq_controller *ctl)
@@ -196,14 +201,15 @@ meson_gpio_irq_request_channel(struct meson_gpio_irq_controller *ctl,
 			       unsigned long  hwirq,
 			       u32 **channel_hwirq)
 {
+	unsigned long flags;
 	unsigned int idx;
 
-	spin_lock(&ctl->lock);
+	spin_lock_irqsave(&ctl->lock, flags);
 
 	/* Find a free channel */
 	idx = find_first_zero_bit(ctl->channel_map, NUM_CHANNEL);
 	if (idx >= NUM_CHANNEL) {
-		spin_unlock(&ctl->lock);
+		spin_unlock_irqrestore(&ctl->lock, flags);
 		pr_err("No channel available\n");
 		return -ENOSPC;
 	}
@@ -211,6 +217,8 @@ meson_gpio_irq_request_channel(struct meson_gpio_irq_controller *ctl,
 	/* Mark the channel as used */
 	set_bit(idx, ctl->channel_map);
 
+	spin_unlock_irqrestore(&ctl->lock, flags);
+
 	/*
 	 * Setup the mux of the channel to route the signal of the pad
 	 * to the appropriate input of the GIC
@@ -225,8 +233,6 @@ meson_gpio_irq_request_channel(struct meson_gpio_irq_controller *ctl,
 	 */
 	*channel_hwirq = &(ctl->channel_irqs[idx]);
 
-	spin_unlock(&ctl->lock);
-
 	pr_debug("hwirq %lu assigned to channel %d - irq %u\n",
 		 hwirq, idx, **channel_hwirq);
 
@@ -287,13 +293,9 @@ static int meson_gpio_irq_type_setup(struct meson_gpio_irq_controller *ctl,
 			val |= REG_EDGE_POL_LOW(params, idx);
 	}
 
-	spin_lock(&ctl->lock);
-
 	meson_gpio_irq_update_bits(ctl, REG_EDGE_POL,
 				   REG_EDGE_POL_MASK(params, idx), val);
 
-	spin_unlock(&ctl->lock);
-
 	return 0;
 }