Linux 5.4-rc4

Pull more Kbuild fixes from Masahiro Yamada:

 - fix a bashism of setlocalversion

 - do not use the too new --sort option of tar

* tag 'kbuild-fixes-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kheaders: substituting --sort in archive creation
  scripts: setlocalversion: fix a bashism
  kbuild: update comment about KBUILD_ALLDIRS

CREDITS

@@ -1637,6 +1637,10 @@ S: Panoramastrasse 18
 S: D-69126 Heidelberg
 S: Germany
 
+N: Simon Horman
+M: horms@verge.net.au
+D: Renesas ARM/ARM64 SoC maintainer
+
 N: Christopher Horn
 E: chorn@warwick.net
 D: Miscellaneous sysctl hacks

Documentation/admin-guide/cgroup-v2.rst

@@ -615,8 +615,8 @@ on an IO device and is an example of this type.
 Protections
 -----------
 
-A cgroup is protected to be allocated upto the configured amount of
-the resource if the usages of all its ancestors are under their
+A cgroup is protected upto the configured amount of the resource
+as long as the usages of all its ancestors are under their
 protected levels.  Protections can be hard guarantees or best effort
 soft boundaries.  Protections can also be over-committed in which case
 only upto the amount available to the parent is protected among
@@ -1096,7 +1096,10 @@ PAGE_SIZE multiple when read back.
 	is within its effective min boundary, the cgroup's memory
 	won't be reclaimed under any conditions. If there is no
 	unprotected reclaimable memory available, OOM killer
-	is invoked.
+	is invoked. Above the effective min boundary (or
+	effective low boundary if it is higher), pages are reclaimed
+	proportionally to the overage, reducing reclaim pressure for
+	smaller overages.
 
        Effective min boundary is limited by memory.min values of
 	all ancestor cgroups. If there is memory.min overcommitment
@@ -1118,7 +1121,10 @@ PAGE_SIZE multiple when read back.
 	Best-effort memory protection.  If the memory usage of a
 	cgroup is within its effective low boundary, the cgroup's
 	memory won't be reclaimed unless memory can be reclaimed
-	from unprotected cgroups.
+	from unprotected cgroups.  Above the effective low boundary (or
+	effective min boundary if it is higher), pages are reclaimed
+	proportionally to the overage, reducing reclaim pressure for
+	smaller overages.
 
 	Effective low boundary is limited by memory.low values of
 	all ancestor cgroups. If there is memory.low overcommitment
@@ -2482,8 +2488,10 @@ system performance due to overreclaim, to the point where the feature
 becomes self-defeating.
 
 The memory.low boundary on the other hand is a top-down allocated
-reserve.  A cgroup enjoys reclaim protection when it's within its low,
-which makes delegation of subtrees possible.
+reserve.  A cgroup enjoys reclaim protection when it's within its
+effective low, which makes delegation of subtrees possible. It also
+enjoys having reclaim pressure proportional to its overage when
+above its effective low.
 
 The original high boundary, the hard limit, is defined as a strict
 limit that can not budge, even if the OOM killer has to be called.

Documentation/admin-guide/kernel-parameters.txt

@@ -5302,6 +5302,10 @@
 				the unplug protocol
 			never -- do not unplug even if version check succeeds
 
+	xen_legacy_crash	[X86,XEN]
+			Crash from Xen panic notifier, without executing late
+			panic() code such as dumping handler.
+
 	xen_nopvspin	[X86,XEN]
 			Disables the ticketlock slowpath using Xen PV
 			optimizations.

Documentation/arm64/memory.rst

@@ -154,11 +154,18 @@ return virtual addresses to userspace from a 48-bit range.
 
 Software can "opt-in" to receiving VAs from a 52-bit space by
 specifying an mmap hint parameter that is larger than 48-bit.
+
 For example:
-    maybe_high_address = mmap(~0UL, size, prot, flags,...);
+
+.. code-block:: c
+
+   maybe_high_address = mmap(~0UL, size, prot, flags,...);
 
 It is also possible to build a debug kernel that returns addresses
 from a 52-bit space by enabling the following kernel config options:
+
+.. code-block:: sh
+
    CONFIG_EXPERT=y && CONFIG_ARM64_FORCE_52BIT=y
 
 Note that this option is only intended for debugging applications

Documentation/arm64/silicon-errata.rst

@@ -107,6 +107,8 @@ stable kernels.
 +----------------+-----------------+-----------------+-----------------------------+
 | Cavium         | ThunderX2 SMMUv3| #126            | N/A                         |
 +----------------+-----------------+-----------------+-----------------------------+
+| Cavium         | ThunderX2 Core  | #219            | CAVIUM_TX2_ERRATUM_219      |
++----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | Freescale/NXP  | LS2080A/LS1043A | A-008585        | FSL_ERRATUM_A008585         |
 +----------------+-----------------+-----------------+-----------------------------+

Documentation/core-api/index.rst

@@ -38,6 +38,7 @@ Core utilities
    protection-keys
    ../RCU/index
    gcc-plugins
+   symbol-namespaces
 
 
 Interfaces for kernel debugging

Documentation/core-api/memory-allocation.rst

@@ -98,6 +98,10 @@ limited. The actual limit depends on the hardware and the kernel
 configuration, but it is a good practice to use `kmalloc` for objects
 smaller than page size.
 
+The address of a chunk allocated with `kmalloc` is aligned to at least
+ARCH_KMALLOC_MINALIGN bytes.  For sizes which are a power of two, the
+alignment is also guaranteed to be at least the respective size.
+
 For large allocations you can use :c:func:`vmalloc` and
 :c:func:`vzalloc`, or directly request pages from the page
 allocator. The memory allocated by `vmalloc` and related functions is

Documentation/dev-tools/kasan.rst

@@ -41,6 +41,9 @@ smaller binary while the latter is 1.1 - 2 times faster.
 Both KASAN modes work with both SLUB and SLAB memory allocators.
 For better bug detection and nicer reporting, enable CONFIG_STACKTRACE.
 
+To augment reports with last allocation and freeing stack of the physical page,
+it is recommended to enable also CONFIG_PAGE_OWNER and boot with page_owner=on.
+
 To disable instrumentation for specific files or directories, add a line
 similar to the following to the respective kernel Makefile:
 

Documentation/dev-tools/kselftest.rst

@@ -89,6 +89,22 @@ To build, save output files in a separate directory with KBUILD_OUTPUT ::
 
   $ export KBUILD_OUTPUT=/tmp/kselftest; make TARGETS="size timers" kselftest
 
+Additionally you can use the "SKIP_TARGETS" variable on the make command
+line to specify one or more targets to exclude from the TARGETS list.
+
+To run all tests but a single subsystem::
+
+  $ make -C tools/testing/selftests SKIP_TARGETS=ptrace run_tests
+
+You can specify multiple tests to skip::
+
+  $  make SKIP_TARGETS="size timers" kselftest
+
+You can also specify a restricted list of tests to run together with a
+dedicated skiplist::
+
+  $  make TARGETS="bpf breakpoints size timers" SKIP_TARGETS=bpf kselftest
+
 See the top-level tools/testing/selftests/Makefile for the list of all
 possible targets.
 

Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt

@@ -1,8 +1,11 @@
 * Advanced Interrupt Controller (AIC)
 
 Required properties:
-- compatible: Should be "atmel,<chip>-aic"
-  <chip> can be "at91rm9200", "sama5d2", "sama5d3" or "sama5d4"
+- compatible: Should be:
+    - "atmel,<chip>-aic" where  <chip> can be "at91rm9200", "sama5d2",
+      "sama5d3" or "sama5d4"
+    - "microchip,<chip>-aic" where <chip> can be "sam9x60"
+
 - interrupt-controller: Identifies the node as an interrupt controller.
 - #interrupt-cells: The number of cells to define the interrupts. It should be 3.
   The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).

Documentation/devicetree/bindings/serial/renesas,sci-serial.txt

@@ -26,6 +26,8 @@ Required properties:
     - "renesas,hscif-r8a77470" for R8A77470 (RZ/G1C) HSCIF compatible UART.
     - "renesas,scif-r8a774a1" for R8A774A1 (RZ/G2M) SCIF compatible UART.
     - "renesas,hscif-r8a774a1" for R8A774A1 (RZ/G2M) HSCIF compatible UART.
+    - "renesas,scif-r8a774b1" for R8A774B1 (RZ/G2N) SCIF compatible UART.
+    - "renesas,hscif-r8a774b1" for R8A774B1 (RZ/G2N) HSCIF compatible UART.
     - "renesas,scif-r8a774c0" for R8A774C0 (RZ/G2E) SCIF compatible UART.
     - "renesas,hscif-r8a774c0" for R8A774C0 (RZ/G2E) HSCIF compatible UART.
     - "renesas,scif-r8a7778" for R8A7778 (R-Car M1) SCIF compatible UART.

Documentation/devicetree/bindings/usb/amlogic,dwc3.txt

@@ -85,8 +85,8 @@ A child node must exist to represent the core DWC2 IP block. The name of
 the node is not important. The content of the node is defined in dwc2.txt.
 
 PHY documentation is provided in the following places:
-- Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt
-- Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
+- Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
+- Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
 
 Example device nodes:
 	usb: usb@ffe09000 {

Documentation/devicetree/bindings/usb/generic-ehci.yaml

@@ -63,7 +63,11 @@ properties:
     description:
       Set this flag to force EHCI reset after resume.
 
-  phys: true
+  phys:
+    description: PHY specifier for the USB PHY
+
+  phy-names:
+    const: usb
 
 required:
   - compatible
@@ -89,6 +93,7 @@ examples:
         interrupts = <39>;
         clocks = <&ahb_gates 1>;
         phys = <&usbphy 1>;
+        phy-names = "usb";
     };
 
 ...

Documentation/devicetree/bindings/usb/generic-ohci.yaml

@@ -67,7 +67,11 @@ properties:
     description:
       Overrides the detected port count
 
-  phys: true
+  phys:
+    description: PHY specifier for the USB PHY
+
+  phy-names:
+    const: usb
 
 required:
   - compatible
@@ -84,6 +88,7 @@ examples:
           interrupts = <64>;
           clocks = <&usb_clk 6>, <&ahb_gates 2>;
           phys = <&usbphy 1>;
+          phy-names = "usb";
       };
 
 ...

Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt

@@ -33,7 +33,7 @@ Required properties:
 	"dma_ck": dma_bus clock for data transfer by DMA,
 	"xhci_ck": controller clock
 
- - phys : see usb-hcd.txt in the current directory
+ - phys : see usb-hcd.yaml in the current directory
 
 Optional properties:
  - wakeup-source : enable USB remote wakeup;
@@ -53,7 +53,7 @@ Optional properties:
 	See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
  - imod-interval-ns: default interrupt moderation interval is 5000ns
 
-additionally the properties from usb-hcd.txt (in the current directory) are
+additionally the properties from usb-hcd.yaml (in the current directory) are
 supported.
 
 Example:

Documentation/devicetree/bindings/usb/mediatek,mtu3.txt

@@ -17,7 +17,7 @@ Required properties:
  - clock-names : must contain "sys_ck" for clock of controller,
 	the following clocks are optional:
 	"ref_ck", "mcu_ck" and "dma_ck";
- - phys : see usb-hcd.txt in the current directory
+ - phys : see usb-hcd.yaml in the current directory
  - dr_mode : should be one of "host", "peripheral" or "otg",
 	refer to usb/generic.txt
 
@@ -60,7 +60,7 @@ Optional properties:
  - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0,
 	bit1 for u3port1, ... etc;
 
-additionally the properties from usb-hcd.txt (in the current directory) are
+additionally the properties from usb-hcd.yaml (in the current directory) are
 supported.
 
 Sub-nodes:

Documentation/devicetree/bindings/usb/usb-hcd.yaml

@@ -18,8 +18,13 @@ properties:
     description:
       List of all the USB PHYs on this HCD
 
+  phy-names:
+    description:
+      Name specifier for the USB PHY
+
 examples:
   - |
     usb {
         phys = <&usb2_phy1>, <&usb3_phy1>;
+        phy-names = "usb";
     };

Documentation/devicetree/bindings/usb/usb-uhci.txt

@@ -6,7 +6,7 @@ Required properties:
 - reg : Should contain 1 register ranges(address and length)
 - interrupts : UHCI controller interrupt
 
-additionally the properties from usb-hcd.txt (in the current directory) are
+additionally the properties from usb-hcd.yaml (in the current directory) are
 supported.
 
 Example:

Documentation/devicetree/bindings/usb/usb-xhci.txt

@@ -41,9 +41,9 @@ Optional properties:
   - usb3-lpm-capable: determines if platform is USB3 LPM capable
   - quirk-broken-port-ped: set if the controller has broken port disable mechanism
   - imod-interval-ns: default interrupt moderation interval is 5000ns
-  - phys : see usb-hcd.txt in the current directory
+  - phys : see usb-hcd.yaml in the current directory
 
-additionally the properties from usb-hcd.txt (in the current directory) are
+additionally the properties from usb-hcd.yaml (in the current directory) are
 supported.
 
 

Documentation/hwmon/index.rst

@@ -7,6 +7,7 @@ Linux Hardware Monitoring
 
    hwmon-kernel-api
    pmbus-core
+   inspur-ipsps1
    submitting-patches
    sysfs-interface
    userspace-tools

Documentation/hwmon/inspur-ipsps1.rst

@@ -1,5 +1,5 @@
 Kernel driver inspur-ipsps1
-=======================
+===========================
 
 Supported chips:
 

Documentation/hwmon/k10temp.rst

@@ -21,10 +21,17 @@ Supported chips:
 
 * AMD Family 14h processors: "Brazos" (C/E/G/Z-Series)
 
-* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity", "Kaveri", "Carrizo"
+* AMD Family 15h processors: "Bulldozer" (FX-Series), "Trinity", "Kaveri",
+  "Carrizo", "Stoney Ridge", "Bristol Ridge"
 
 * AMD Family 16h processors: "Kabini", "Mullins"
 
+* AMD Family 17h processors: "Zen", "Zen 2"
+
+* AMD Family 18h processors: "Hygon Dhyana"
+
+* AMD Family 19h processors: "Zen 3"
+
   Prefix: 'k10temp'
 
   Addresses scanned: PCI space
@@ -110,3 +117,12 @@ The maximum value for Tctl is available in the file temp1_max.
 If the BIOS has enabled hardware temperature control, the threshold at
 which the processor will throttle itself to avoid damage is available in
 temp1_crit and temp1_crit_hyst.
+
+On some AMD CPUs, there is a difference between the die temperature (Tdie) and
+the reported temperature (Tctl). Tdie is the real measured temperature, and
+Tctl is used for fan control. While Tctl is always available as temp1_input,
+the driver exports Tdie temperature as temp2_input for those CPUs which support
+it.
+
+Models from 17h family report relative temperature, the driver aims to
+compensate and report the real temperature.

Documentation/networking/device_drivers/pensando/ionic.rst

@@ -36,8 +36,10 @@ Support
 =======
 For general Linux networking support, please use the netdev mailing
 list, which is monitored by Pensando personnel::
+
   netdev@vger.kernel.org
 
 For more specific support needs, please use the Pensando driver support
 email::
-	drivers@pensando.io
+
+  drivers@pensando.io

Documentation/networking/net_dim.txt

@@ -92,16 +92,16 @@ under some conditions.
 Part III: Registering a Network Device to DIM
 ==============================================
 
-Net DIM API exposes the main function net_dim(struct net_dim *dim,
-struct net_dim_sample end_sample). This function is the entry point to the Net
+Net DIM API exposes the main function net_dim(struct dim *dim,
+struct dim_sample end_sample). This function is the entry point to the Net
 DIM algorithm and has to be called every time the driver would like to check if
 it should change interrupt moderation parameters. The driver should provide two
-data structures: struct net_dim and struct net_dim_sample. Struct net_dim
+data structures: struct dim and struct dim_sample. Struct dim
 describes the state of DIM for a specific object (RX queue, TX queue,
 other queues, etc.). This includes the current selected profile, previous data
 samples, the callback function provided by the driver and more.
-Struct net_dim_sample describes a data sample, which will be compared to the
-data sample stored in struct net_dim in order to decide on the algorithm's next
+Struct dim_sample describes a data sample, which will be compared to the
+data sample stored in struct dim in order to decide on the algorithm's next
 step. The sample should include bytes, packets and interrupts, measured by
 the driver.
 
@@ -110,9 +110,9 @@ main net_dim() function. The recommended method is to call net_dim() on each
 interrupt. Since Net DIM has a built-in moderation and it might decide to skip
 iterations under certain conditions, there is no need to moderate the net_dim()
 calls as well. As mentioned above, the driver needs to provide an object of type
-struct net_dim to the net_dim() function call. It is advised for each entity
-using Net DIM to hold a struct net_dim as part of its data structure and use it
-as the main Net DIM API object. The struct net_dim_sample should hold the latest
+struct dim to the net_dim() function call. It is advised for each entity
+using Net DIM to hold a struct dim as part of its data structure and use it
+as the main Net DIM API object. The struct dim_sample should hold the latest
 bytes, packets and interrupts count. No need to perform any calculations, just
 include the raw data.
 
@@ -132,19 +132,19 @@ usage is not complete but it should make the outline of the usage clear.
 
 my_driver.c:
 
-#include <linux/net_dim.h>
+#include <linux/dim.h>
 
 /* Callback for net DIM to schedule on a decision to change moderation */
 void my_driver_do_dim_work(struct work_struct *work)
 {
-	/* Get struct net_dim from struct work_struct */
-	struct net_dim *dim = container_of(work, struct net_dim,
-					   work);
+	/* Get struct dim from struct work_struct */
+	struct dim *dim = container_of(work, struct dim,
+				       work);
 	/* Do interrupt moderation related stuff */
 	...
 
 	/* Signal net DIM work is done and it should move to next iteration */
-	dim->state = NET_DIM_START_MEASURE;
+	dim->state = DIM_START_MEASURE;
 }
 
 /* My driver's interrupt handler */
@@ -152,13 +152,13 @@ int my_driver_handle_interrupt(struct my_driver_entity *my_entity, ...)
 {
 	...
 	/* A struct to hold current measured data */
-	struct net_dim_sample dim_sample;
+	struct dim_sample dim_sample;
 	...
 	/* Initiate data sample struct with current data */
-	net_dim_sample(my_entity->events,
-		       my_entity->packets,
-		       my_entity->bytes,
-		       &dim_sample);
+	dim_update_sample(my_entity->events,
+		          my_entity->packets,
+		          my_entity->bytes,
+		          &dim_sample);
 	/* Call net DIM */
 	net_dim(&my_entity->dim, dim_sample);
 	...

Documentation/process/coding-style.rst

@@ -56,7 +56,7 @@ instead of ``double-indenting`` the ``case`` labels.  E.g.:
 	case 'K':
 	case 'k':
 		mem <<= 10;
-		/* fall through */
+		fallthrough;
 	default:
 		break;
 	}

Documentation/process/deprecated.rst

@@ -122,14 +122,27 @@ memory adjacent to the stack (when built without `CONFIG_VMAP_STACK=y`)
 
 Implicit switch case fall-through
 ---------------------------------
-The C language allows switch cases to "fall through" when
-a "break" statement is missing at the end of a case. This,
-however, introduces ambiguity in the code, as it's not always
-clear if the missing break is intentional or a bug. As there
-have been a long list of flaws `due to missing "break" statements
+The C language allows switch cases to "fall-through" when a "break" statement
+is missing at the end of a case. This, however, introduces ambiguity in the
+code, as it's not always clear if the missing break is intentional or a bug.
+
+As there have been a long list of flaws `due to missing "break" statements
 <https://cwe.mitre.org/data/definitions/484.html>`_, we no longer allow
-"implicit fall-through". In order to identify an intentional fall-through
-case, we have adopted the marking used by static analyzers: a comment
-saying `/* Fall through */`. Once the C++17 `__attribute__((fallthrough))`
-is more widely handled by C compilers, static analyzers, and IDEs, we can
-switch to using that instead.
+"implicit fall-through".
+
+In order to identify intentional fall-through cases, we have adopted a
+pseudo-keyword macro 'fallthrough' which expands to gcc's extension
+__attribute__((__fallthrough__)).  `Statement Attributes
+<https://gcc.gnu.org/onlinedocs/gcc/Statement-Attributes.html>`_
+
+When the C17/C18  [[fallthrough]] syntax is more commonly supported by
+C compilers, static analyzers, and IDEs, we can switch to using that syntax
+for the macro pseudo-keyword.
+
+All switch/case blocks must end in one of:
+
+	break;
+	fallthrough;
+	continue;
+	goto <label>;
+	return [expression];

Documentation/usb/rio.rst

@@ -1,109 +0,0 @@
-============
-Diamonds Rio
-============
-
-Copyright (C) 1999, 2000 Bruce Tenison
-
-Portions Copyright (C) 1999, 2000 David Nelson
-
-Thanks to David Nelson for guidance and the usage of the scanner.txt
-and scanner.c files to model our driver and this informative file.
-
-Mar. 2, 2000
-
-Changes
-=======
-
-- Initial Revision
-
-
-Overview
-========
-
-This README will address issues regarding how to configure the kernel
-to access a RIO 500 mp3 player.
-Before I explain how to use this to access the Rio500 please be warned:
-
-.. warning::
-
-   Please note that this software is still under development.  The authors
-   are in no way responsible for any damage that may occur, no matter how
-   inconsequential.
-
-It seems that the Rio has a problem when sending .mp3 with low batteries.
-I suggest when the batteries are low and you want to transfer stuff that you
-replace it with a fresh one. In my case, what happened is I lost two 16kb
-blocks (they are no longer usable to store information to it). But I don't
-know if that's normal or not; it could simply be a problem with the flash
-memory.
-
-In an extreme case, I left my Rio playing overnight and the batteries wore
-down to nothing and appear to have corrupted the flash memory. My RIO
-needed to be replaced as a result.  Diamond tech support is aware of the
-problem.  Do NOT allow your batteries to wear down to nothing before
-changing them.  It appears RIO 500 firmware does not handle low battery
-power well at all.
-
-On systems with OHCI controllers, the kernel OHCI code appears to have
-power on problems with some chipsets.  If you are having problems
-connecting to your RIO 500, try turning it on first and then plugging it
-into the USB cable.
-
-Contact Information
--------------------
-
-   The main page for the project is hosted at sourceforge.net in the following
-   URL: <http://rio500.sourceforge.net>. You can also go to the project's
-   sourceforge home page at: <http://sourceforge.net/projects/rio500/>.
-   There is also a mailing list: rio500-users@lists.sourceforge.net
-
-Authors
--------
-
-Most of the code was written by Cesar Miquel <miquel@df.uba.ar>. Keith
-Clayton <kclayton@jps.net> is incharge of the PPC port and making sure
-things work there. Bruce Tenison <btenison@dibbs.net> is adding support
-for .fon files and also does testing. The program will mostly sure be
-re-written and Pete Ikusz along with the rest will re-design it. I would
-also like to thank Tri Nguyen <tmn_3022000@hotmail.com> who provided use
-with some important information regarding the communication with the Rio.
-
-Additional Information and userspace tools
-
-	http://rio500.sourceforge.net/
-
-
-Requirements
-============
-
-A host with a USB port running a Linux kernel with RIO 500 support enabled.
-
-The driver is a module called rio500, which should be automatically loaded
-as you plug in your device. If that fails you can manually load it with
-
-  modprobe rio500
-
-Udev should automatically create a device node as soon as plug in your device.
-If that fails, you can manually add a device for the USB rio500::
-
-  mknod /dev/usb/rio500 c 180 64
-
-In that case, set appropriate permissions for /dev/usb/rio500 (don't forget
-about group and world permissions).  Both read and write permissions are
-required for proper operation.
-
-That's it.  The Rio500 Utils at: http://rio500.sourceforge.net should
-be able to access the rio500.
-
-Limits
-======
-
-You can use only a single rio500 device at a time with your computer.
-
-Bugs
-====
-
-If you encounter any problems feel free to drop me an email.
-
-Bruce Tenison
-btenison@dibbs.net

MAINTAINERS

@@ -2165,12 +2165,10 @@ F:	arch/arm64/boot/dts/realtek/
 F:	Documentation/devicetree/bindings/arm/realtek.yaml
 
 ARM/RENESAS ARM64 ARCHITECTURE
-M:	Simon Horman <horms@verge.net.au>
 M:	Geert Uytterhoeven <geert+renesas@glider.be>
 M:	Magnus Damm <magnus.damm@gmail.com>
 L:	linux-renesas-soc@vger.kernel.org
 Q:	http://patchwork.kernel.org/project/linux-renesas-soc/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git next
 S:	Supported
 F:	arch/arm64/boot/dts/renesas/
@@ -2282,12 +2280,10 @@ S:	Maintained
 F:	drivers/media/platform/s5p-mfc/
 
 ARM/SHMOBILE ARM ARCHITECTURE
-M:	Simon Horman <horms@verge.net.au>
 M:	Geert Uytterhoeven <geert+renesas@glider.be>
 M:	Magnus Damm <magnus.damm@gmail.com>
 L:	linux-renesas-soc@vger.kernel.org
 Q:	http://patchwork.kernel.org/project/linux-renesas-soc/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git next
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel.git next
 S:	Supported
 F:	arch/arm/boot/dts/emev2*
@@ -9126,7 +9122,7 @@ F:	drivers/auxdisplay/ks0108.c
 F:	include/linux/ks0108.h
 
 L3MDEV
-M:	David Ahern <dsa@cumulusnetworks.com>
+M:	David Ahern <dsahern@kernel.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	net/l3mdev
@@ -9187,6 +9183,7 @@ M:	Pavel Machek <pavel@ucw.cz>
 R:	Dan Murphy <dmurphy@ti.com>
 L:	linux-leds@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds.git
 S:	Maintained
 F:	Documentation/devicetree/bindings/leds/
 F:	drivers/leds/
@@ -10258,7 +10255,7 @@ MEDIATEK ETHERNET DRIVER
 M:	Felix Fietkau <nbd@openwrt.org>
 M:	John Crispin <john@phrozen.org>
 M:	Sean Wang <sean.wang@mediatek.com>
-M:	Nelson Chang <nelson.chang@mediatek.com>
+M:	Mark Lee <Mark-MC.Lee@mediatek.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/mediatek/
@@ -11547,6 +11544,7 @@ NSDEPS
 M:	Matthias Maennich <maennich@google.com>
 S:	Maintained
 F:	scripts/nsdeps
+F:	Documentation/core-api/symbol-namespaces.rst
 
 NTB AMD DRIVER
 M:	Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
@@ -12314,12 +12312,15 @@ F:	arch/parisc/
 F:	Documentation/parisc/
 F:	drivers/parisc/
 F:	drivers/char/agp/parisc-agp.c
+F:	drivers/input/misc/hp_sdc_rtc.c
 F:	drivers/input/serio/gscps2.c
+F:	drivers/input/serio/hp_sdc*
 F:	drivers/parport/parport_gsc.*
 F:	drivers/tty/serial/8250/8250_gsc.c
 F:	drivers/video/fbdev/sti*
 F:	drivers/video/console/sti*
 F:	drivers/video/logo/logo_parisc*
+F:	include/linux/hp_sdc.h
 
 PARMAN
 M:	Jiri Pirko <jiri@mellanox.com>
@@ -13363,7 +13364,7 @@ S:	Maintained
 F:	drivers/scsi/qla1280.[ch]
 
 QLOGIC QLA2XXX FC-SCSI DRIVER
-M:	qla2xxx-upstream@qlogic.com
+M:	hmadhani@marvell.com
 L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	Documentation/scsi/LICENSE.qla2xxx
@@ -16766,13 +16767,6 @@ W:	http://www.linux-usb.org/usbnet
 S:	Maintained
 F:	drivers/net/usb/dm9601.c
 
-USB DIAMOND RIO500 DRIVER
-M:	Cesar Miquel <miquel@df.uba.ar>
-L:	rio500-users@lists.sourceforge.net
-W:	http://rio500.sourceforge.net
-S:	Maintained
-F:	drivers/usb/misc/rio500*
-
 USB EHCI DRIVER
 M:	Alan Stern <stern@rowland.harvard.edu>
 L:	linux-usb@vger.kernel.org
@@ -17439,7 +17433,7 @@ F:	include/linux/regulator/
 K:	regulator_get_optional
 
 VRF
-M:	David Ahern <dsa@cumulusnetworks.com>
+M:	David Ahern <dsahern@kernel.org>
 M:	Shrijeet Mukherjee <shrijeet@gmail.com>
 L:	netdev@vger.kernel.org
 S:	Maintained

Makefile

@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 4
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc4
 NAME = Nesting Opossum
 
 # *DOCUMENTATION*
@@ -599,7 +599,7 @@ endif
 # in addition to whatever we do anyway.
 # Just "make" or "make all" shall build modules as well
 
-ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
+ifneq ($(filter all _all modules nsdeps,$(MAKECMDGOALS)),)
   KBUILD_MODULES := 1
 endif
 
@@ -1037,7 +1037,7 @@ export KBUILD_VMLINUX_OBJS := $(head-y) $(init-y) $(core-y) $(libs-y2) \
 export KBUILD_VMLINUX_LIBS := $(libs-y1)
 export KBUILD_LDS          := arch/$(SRCARCH)/kernel/vmlinux.lds
 export LDFLAGS_vmlinux
-# used by scripts/package/Makefile
+# used by scripts/Makefile.package
 export KBUILD_ALLDIRS := $(sort $(filter-out arch/%,$(vmlinux-alldirs)) LICENSES arch include scripts tools)
 
 vmlinux-deps := $(KBUILD_LDS) $(KBUILD_VMLINUX_OBJS) $(KBUILD_VMLINUX_LIBS)
@@ -1217,9 +1217,8 @@ PHONY += kselftest
 kselftest:
 	$(Q)$(MAKE) -C $(srctree)/tools/testing/selftests run_tests
 
-PHONY += kselftest-clean
-kselftest-clean:
-	$(Q)$(MAKE) -C $(srctree)/tools/testing/selftests clean
+kselftest-%: FORCE
+	$(Q)$(MAKE) -C $(srctree)/tools/testing/selftests $*
 
 PHONY += kselftest-merge
 kselftest-merge:

arch/arm/boot/dts/mt7629-rfb.dts

@@ -66,9 +66,21 @@
 	pinctrl-1 = <&ephy_leds_pins>;
 	status = "okay";
 
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+
 	gmac1: mac@1 {
 		compatible = "mediatek,eth-mac";
 		reg = <1>;
+		phy-mode = "gmii";
 		phy-handle = <&phy0>;
 	};
 
@@ -78,7 +90,6 @@
 
 		phy0: ethernet-phy@0 {
 			reg = <0>;
-			phy-mode = "gmii";
 		};
 	};
 };

arch/arm/boot/dts/mt7629.dtsi

@@ -468,14 +468,12 @@
 			compatible = "mediatek,mt7629-sgmiisys", "syscon";
 			reg = <0x1b128000 0x3000>;
 			#clock-cells = <1>;
-			mediatek,physpeed = "2500";
 		};
 
 		sgmiisys1: syscon@1b130000 {
 			compatible = "mediatek,mt7629-sgmiisys", "syscon";
 			reg = <0x1b130000 0x3000>;
 			#clock-cells = <1>;
-			mediatek,physpeed = "2500";
 		};
 	};
 };

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -520,6 +520,7 @@
 			interrupts = <39>;
 			clocks = <&ccu CLK_AHB_EHCI0>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -529,6 +530,7 @@
 			interrupts = <64>;
 			clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -608,6 +610,7 @@
 			interrupts = <40>;
 			clocks = <&ccu CLK_AHB_EHCI1>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -617,6 +620,7 @@
 			interrupts = <65>;
 			clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/sun5i.dtsi

@@ -391,6 +391,7 @@
 			interrupts = <39>;
 			clocks = <&ccu CLK_AHB_EHCI>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -400,6 +401,7 @@
 			interrupts = <40>;
 			clocks = <&ccu CLK_USB_OHCI>, <&ccu CLK_AHB_OHCI>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/sun6i-a31.dtsi

@@ -545,6 +545,7 @@
 			clocks = <&ccu CLK_AHB1_EHCI0>;
 			resets = <&ccu RST_AHB1_EHCI0>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -555,6 +556,7 @@
 			clocks = <&ccu CLK_AHB1_OHCI0>, <&ccu CLK_USB_OHCI0>;
 			resets = <&ccu RST_AHB1_OHCI0>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -565,6 +567,7 @@
 			clocks = <&ccu CLK_AHB1_EHCI1>;
 			resets = <&ccu RST_AHB1_EHCI1>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -575,6 +578,7 @@
 			clocks = <&ccu CLK_AHB1_OHCI1>, <&ccu CLK_USB_OHCI1>;
 			resets = <&ccu RST_AHB1_OHCI1>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -623,6 +623,7 @@
 			interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_AHB_EHCI0>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -632,6 +633,7 @@
 			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_USB_OHCI0>, <&ccu CLK_AHB_OHCI0>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -714,6 +716,7 @@
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_AHB_EHCI1>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -723,6 +726,7 @@
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_USB_OHCI1>, <&ccu CLK_AHB_OHCI1>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/sun8i-a23-a33.dtsi

@@ -307,6 +307,7 @@
 			clocks = <&ccu CLK_BUS_EHCI>;
 			resets = <&ccu RST_BUS_EHCI>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -317,6 +318,7 @@
 			clocks = <&ccu CLK_BUS_OHCI>, <&ccu CLK_USB_OHCI>;
 			resets = <&ccu RST_BUS_OHCI>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/sun8i-a83t.dtsi

@@ -632,6 +632,7 @@
 			clocks = <&ccu CLK_BUS_EHCI0>;
 			resets = <&ccu RST_BUS_EHCI0>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -643,6 +644,7 @@
 			clocks = <&ccu CLK_BUS_OHCI0>, <&ccu CLK_USB_OHCI0>;
 			resets = <&ccu RST_BUS_OHCI0>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -654,6 +656,7 @@
 			clocks = <&ccu CLK_BUS_EHCI1>;
 			resets = <&ccu RST_BUS_EHCI1>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/sun8i-r40.dtsi

@@ -273,6 +273,7 @@
 			clocks = <&ccu CLK_BUS_EHCI1>;
 			resets = <&ccu RST_BUS_EHCI1>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -284,6 +285,7 @@
 				 <&ccu CLK_USB_OHCI1>;
 			resets = <&ccu RST_BUS_OHCI1>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -294,6 +296,7 @@
 			clocks = <&ccu CLK_BUS_EHCI2>;
 			resets = <&ccu RST_BUS_EHCI2>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -305,6 +308,7 @@
 				 <&ccu CLK_USB_OHCI2>;
 			resets = <&ccu RST_BUS_OHCI2>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/sun9i-a80.dtsi

@@ -346,6 +346,7 @@
 			clocks = <&usb_clocks CLK_BUS_HCI0>;
 			resets = <&usb_clocks RST_USB0_HCI>;
 			phys = <&usbphy1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -357,6 +358,7 @@
 				 <&usb_clocks CLK_USB_OHCI0>;
 			resets = <&usb_clocks RST_USB0_HCI>;
 			phys = <&usbphy1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -378,6 +380,7 @@
 			clocks = <&usb_clocks CLK_BUS_HCI1>;
 			resets = <&usb_clocks RST_USB1_HCI>;
 			phys = <&usbphy2>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -407,6 +410,7 @@
 			clocks = <&usb_clocks CLK_BUS_HCI2>;
 			resets = <&usb_clocks RST_USB2_HCI>;
 			phys = <&usbphy3>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -418,6 +422,7 @@
 				 <&usb_clocks CLK_USB_OHCI2>;
 			resets = <&usb_clocks RST_USB2_HCI>;
 			phys = <&usbphy3>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 

arch/arm/boot/dts/sunxi-h3-h5.dtsi

@@ -304,6 +304,7 @@
 			clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>;
 			resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -315,6 +316,7 @@
 				 <&ccu CLK_USB_OHCI1>;
 			resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -325,6 +327,7 @@
 			clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>;
 			resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -336,6 +339,7 @@
 				 <&ccu CLK_USB_OHCI2>;
 			resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>;
 			phys = <&usbphy 2>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -346,6 +350,7 @@
 			clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>;
 			resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
 			phys = <&usbphy 3>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -357,6 +362,7 @@
 				 <&ccu CLK_USB_OHCI3>;
 			resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>;
 			phys = <&usbphy 3>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 

arch/arm/configs/badge4_defconfig

@@ -91,7 +91,6 @@ CONFIG_USB_SERIAL_PL2303=m
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_RIO500=m
 CONFIG_EXT2_FS=m
 CONFIG_EXT3_FS=m
 CONFIG_MSDOS_FS=y

arch/arm/configs/corgi_defconfig

@@ -195,7 +195,6 @@ CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_CYTHERM=m

arch/arm/configs/pxa_defconfig

@@ -581,7 +581,6 @@ CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_CYTHERM=m

arch/arm/configs/s3c2410_defconfig

@@ -327,7 +327,6 @@ CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
 CONFIG_USB_ADUTUX=m
 CONFIG_USB_SEVSEG=m
-CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_CYPRESS_CY7C63=m

arch/arm/configs/spitz_defconfig

@@ -189,7 +189,6 @@ CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
-CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_CYTHERM=m

arch/arm/crypto/Kconfig

@@ -98,6 +98,7 @@ config CRYPTO_AES_ARM_CE
 	tristate "Accelerated AES using ARMv8 Crypto Extensions"
 	depends on KERNEL_MODE_NEON
 	select CRYPTO_BLKCIPHER
+	select CRYPTO_LIB_AES
 	select CRYPTO_SIMD
 	help
 	  Use an implementation of AES in CBC, CTR and XTS modes that uses

arch/arm/crypto/aes-ce-core.S

@@ -9,6 +9,7 @@
 #include <asm/assembler.h>
 
 	.text
+	.arch		armv8-a
 	.fpu		crypto-neon-fp-armv8
 	.align		3
 

arch/arm64/Kconfig

@@ -110,7 +110,6 @@ config ARM64
 	select GENERIC_STRNLEN_USER
 	select GENERIC_TIME_VSYSCALL
 	select GENERIC_GETTIMEOFDAY
-	select GENERIC_COMPAT_VDSO if (!CPU_BIG_ENDIAN && COMPAT)
 	select HANDLE_DOMAIN_IRQ
 	select HARDIRQS_SW_RESEND
 	select HAVE_PCI
@@ -617,6 +616,23 @@ config CAVIUM_ERRATUM_30115
 
 	  If unsure, say Y.
 
+config CAVIUM_TX2_ERRATUM_219
+	bool "Cavium ThunderX2 erratum 219: PRFM between TTBR change and ISB fails"
+	default y
+	help
+	  On Cavium ThunderX2, a load, store or prefetch instruction between a
+	  TTBR update and the corresponding context synchronizing operation can
+	  cause a spurious Data Abort to be delivered to any hardware thread in
+	  the CPU core.
+
+	  Work around the issue by avoiding the problematic code sequence and
+	  trapping KVM guest TTBRx_EL1 writes to EL2 when SMT is enabled. The
+	  trap handler performs the corresponding register access, skips the
+	  instruction and ensures context synchronization by virtue of the
+	  exception return.
+
+	  If unsure, say Y.
+
 config QCOM_FALKOR_ERRATUM_1003
 	bool "Falkor E1003: Incorrect translation due to ASID change"
 	default y
@@ -1159,7 +1175,7 @@ menuconfig COMPAT
 if COMPAT
 
 config KUSER_HELPERS
-	bool "Enable kuser helpers page for 32 bit applications"
+	bool "Enable kuser helpers page for 32-bit applications"
 	default y
 	help
 	  Warning: disabling this option may break 32-bit user programs.
@@ -1185,6 +1201,18 @@ config KUSER_HELPERS
 	  Say N here only if you are absolutely certain that you do not
 	  need these helpers; otherwise, the safe option is to say Y.
 
+config COMPAT_VDSO
+	bool "Enable vDSO for 32-bit applications"
+	depends on !CPU_BIG_ENDIAN && "$(CROSS_COMPILE_COMPAT)" != ""
+	select GENERIC_COMPAT_VDSO
+	default y
+	help
+	  Place in the process address space of 32-bit applications an
+	  ELF shared object providing fast implementations of gettimeofday
+	  and clock_gettime.
+
+	  You must have a 32-bit build of glibc 2.22 or later for programs
+	  to seamlessly take advantage of this.
 
 menuconfig ARMV8_DEPRECATED
 	bool "Emulate deprecated/obsolete ARMv8 instructions"

arch/arm64/Makefile

@@ -53,22 +53,6 @@ $(warning Detected assembler with broken .inst; disassembly will be unreliable)
   endif
 endif
 
-ifeq ($(CONFIG_GENERIC_COMPAT_VDSO), y)
-  CROSS_COMPILE_COMPAT ?= $(CONFIG_CROSS_COMPILE_COMPAT_VDSO:"%"=%)
-
-  ifeq ($(CONFIG_CC_IS_CLANG), y)
-    $(warning CROSS_COMPILE_COMPAT is clang, the compat vDSO will not be built)
-  else ifeq ($(strip $(CROSS_COMPILE_COMPAT)),)
-    $(warning CROSS_COMPILE_COMPAT not defined or empty, the compat vDSO will not be built)
-  else ifeq ($(shell which $(CROSS_COMPILE_COMPAT)gcc 2> /dev/null),)
-    $(error $(CROSS_COMPILE_COMPAT)gcc not found, check CROSS_COMPILE_COMPAT)
-  else
-    export CROSS_COMPILE_COMPAT
-    export CONFIG_COMPAT_VDSO := y
-    compat_vdso := -DCONFIG_COMPAT_VDSO=1
-  endif
-endif
-
 KBUILD_CFLAGS	+= -mgeneral-regs-only $(lseinstr) $(brokengasinst)	\
 		   $(compat_vdso) $(cc_has_k_constraint)
 KBUILD_CFLAGS	+= -fno-asynchronous-unwind-tables

arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts

@@ -104,6 +104,7 @@
 
 &ehci0 {
 	phys = <&usbphy 0>;
+	phy-names = "usb";
 	status = "okay";
 };
 
@@ -150,6 +151,7 @@
 
 &ohci0 {
 	phys = <&usbphy 0>;
+	phy-names = "usb";
 	status = "okay";
 };
 

arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi

@@ -553,6 +553,7 @@
 			resets = <&ccu RST_BUS_OHCI1>,
 				 <&ccu RST_BUS_EHCI1>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -564,6 +565,7 @@
 				 <&ccu CLK_USB_OHCI1>;
 			resets = <&ccu RST_BUS_OHCI1>;
 			phys = <&usbphy 1>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 

arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi

@@ -547,6 +547,7 @@
 			resets = <&ccu RST_BUS_OHCI3>,
 				 <&ccu RST_BUS_EHCI3>;
 			phys = <&usb2phy 3>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -558,6 +559,7 @@
 				 <&ccu CLK_USB_OHCI3>;
 			resets = <&ccu RST_BUS_OHCI3>;
 			phys = <&usb2phy 3>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 

arch/arm64/include/asm/asm-uaccess.h

@@ -78,10 +78,9 @@ alternative_else_nop_endif
 /*
  * Remove the address tag from a virtual address, if present.
  */
-	.macro	clear_address_tag, dst, addr
-	tst	\addr, #(1 << 55)
-	bic	\dst, \addr, #(0xff << 56)
-	csel	\dst, \dst, \addr, eq
+	.macro	untagged_addr, dst, addr
+	sbfx	\dst, \addr, #0, #56
+	and	\dst, \dst, \addr
 	.endm
 
 #endif

arch/arm64/include/asm/atomic_lse.h

@@ -321,7 +321,8 @@ static inline s64 __lse_atomic64_dec_if_positive(atomic64_t *v)
 }
 
 #define __CMPXCHG_CASE(w, sfx, name, sz, mb, cl...)			\
-static inline u##sz __lse__cmpxchg_case_##name##sz(volatile void *ptr,	\
+static __always_inline u##sz						\
+__lse__cmpxchg_case_##name##sz(volatile void *ptr,			\
 					      u##sz old,		\
 					      u##sz new)		\
 {									\
@@ -362,7 +363,8 @@ __CMPXCHG_CASE(x,  ,  mb_, 64, al, "memory")
 #undef __CMPXCHG_CASE
 
 #define __CMPXCHG_DBL(name, mb, cl...)					\
-static inline long __lse__cmpxchg_double##name(unsigned long old1,	\
+static __always_inline long						\
+__lse__cmpxchg_double##name(unsigned long old1,				\
 					 unsigned long old2,		\
 					 unsigned long new1,		\
 					 unsigned long new2,		\

arch/arm64/include/asm/cpucaps.h

@@ -52,7 +52,9 @@
 #define ARM64_HAS_IRQ_PRIO_MASKING		42
 #define ARM64_HAS_DCPODP			43
 #define ARM64_WORKAROUND_1463225		44
+#define ARM64_WORKAROUND_CAVIUM_TX2_219_TVM	45
+#define ARM64_WORKAROUND_CAVIUM_TX2_219_PRFM	46
 
-#define ARM64_NCAPS				45
+#define ARM64_NCAPS				47
 
 #endif /* __ASM_CPUCAPS_H */

arch/arm64/include/asm/memory.h

@@ -215,12 +215,18 @@ static inline unsigned long kaslr_offset(void)
  * up with a tagged userland pointer. Clear the tag to get a sane pointer to
  * pass on to access_ok(), for instance.
  */
-#define untagged_addr(addr)	\
+#define __untagged_addr(addr)	\
 	((__force __typeof__(addr))sign_extend64((__force u64)(addr), 55))
 
+#define untagged_addr(addr)	({					\
+	u64 __addr = (__force u64)addr;					\
+	__addr &= __untagged_addr(__addr);				\
+	(__force __typeof__(addr))__addr;				\
+})
+
 #ifdef CONFIG_KASAN_SW_TAGS
 #define __tag_shifted(tag)	((u64)(tag) << 56)
-#define __tag_reset(addr)	untagged_addr(addr)
+#define __tag_reset(addr)	__untagged_addr(addr)
 #define __tag_get(addr)		(__u8)((u64)(addr) >> 56)
 #else
 #define __tag_shifted(tag)	0UL

arch/arm64/include/asm/pgtable.h

@@ -876,9 +876,6 @@ static inline void update_mmu_cache(struct vm_area_struct *vma,
 
 #define update_mmu_cache_pmd(vma, address, pmd) do { } while (0)
 
-#define kc_vaddr_to_offset(v)	((v) & ~PAGE_END)
-#define kc_offset_to_vaddr(o)	((o) | PAGE_END)
-
 #ifdef CONFIG_ARM64_PA_BITS_52
 #define phys_to_ttbr(addr)	(((addr) | ((addr) >> 46)) & TTBR_BADDR_MASK_52)
 #else

arch/arm64/include/asm/sysreg.h

@@ -212,7 +212,7 @@
 #define SYS_FAR_EL1			sys_reg(3, 0, 6, 0, 0)
 #define SYS_PAR_EL1			sys_reg(3, 0, 7, 4, 0)
 
-#define SYS_PAR_EL1_F			BIT(1)
+#define SYS_PAR_EL1_F			BIT(0)
 #define SYS_PAR_EL1_FST			GENMASK(6, 1)
 
 /*** Statistical Profiling Extension ***/

arch/arm64/include/asm/vdso/compat_barrier.h

@@ -20,7 +20,7 @@
 
 #define dmb(option) __asm__ __volatile__ ("dmb " #option : : : "memory")
 
-#if __LINUX_ARM_ARCH__ >= 8
+#if __LINUX_ARM_ARCH__ >= 8 && defined(CONFIG_AS_DMB_ISHLD)
 #define aarch32_smp_mb()	dmb(ish)
 #define aarch32_smp_rmb()	dmb(ishld)
 #define aarch32_smp_wmb()	dmb(ishst)

arch/arm64/include/asm/vdso_datapage.h

@@ -1,33 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2012 ARM Limited
- */
-#ifndef __ASM_VDSO_DATAPAGE_H
-#define __ASM_VDSO_DATAPAGE_H
-
-#ifndef __ASSEMBLY__
-
-struct vdso_data {
-	__u64 cs_cycle_last;	/* Timebase at clocksource init */
-	__u64 raw_time_sec;	/* Raw time */
-	__u64 raw_time_nsec;
-	__u64 xtime_clock_sec;	/* Kernel time */
-	__u64 xtime_clock_nsec;
-	__u64 xtime_coarse_sec;	/* Coarse time */
-	__u64 xtime_coarse_nsec;
-	__u64 wtm_clock_sec;	/* Wall to monotonic time */
-	__u64 wtm_clock_nsec;
-	__u32 tb_seq_count;	/* Timebase sequence counter */
-	/* cs_* members must be adjacent and in this order (ldp accesses) */
-	__u32 cs_mono_mult;	/* NTP-adjusted clocksource multiplier */
-	__u32 cs_shift;		/* Clocksource shift (mono = raw) */
-	__u32 cs_raw_mult;	/* Raw clocksource multiplier */
-	__u32 tz_minuteswest;	/* Whacky timezone stuff */
-	__u32 tz_dsttime;
-	__u32 use_syscall;
-	__u32 hrtimer_res;
-};
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __ASM_VDSO_DATAPAGE_H */

arch/arm64/kernel/armv8_deprecated.c

@@ -174,6 +174,9 @@ static void __init register_insn_emulation(struct insn_emulation_ops *ops)
 	struct insn_emulation *insn;
 
 	insn = kzalloc(sizeof(*insn), GFP_KERNEL);
+	if (!insn)
+		return;
+
 	insn->ops = ops;
 	insn->min = INSN_UNDEF;
 
@@ -233,6 +236,8 @@ static void __init register_insn_emulation_sysctl(void)
 
 	insns_sysctl = kcalloc(nr_insn_emulated + 1, sizeof(*sysctl),
 			       GFP_KERNEL);
+	if (!insns_sysctl)
+		return;
 
 	raw_spin_lock_irqsave(&insn_emulation_lock, flags);
 	list_for_each_entry(insn, &insn_emulation, node) {

arch/arm64/kernel/cpu_errata.c

@@ -12,6 +12,7 @@
 #include <asm/cpu.h>
 #include <asm/cputype.h>
 #include <asm/cpufeature.h>
+#include <asm/smp_plat.h>
 
 static bool __maybe_unused
 is_affected_midr_range(const struct arm64_cpu_capabilities *entry, int scope)
@@ -128,8 +129,8 @@ static void install_bp_hardening_cb(bp_hardening_cb_t fn,
 	int cpu, slot = -1;
 
 	/*
-	 * enable_smccc_arch_workaround_1() passes NULL for the hyp_vecs
-	 * start/end if we're a guest. Skip the hyp-vectors work.
+	 * detect_harden_bp_fw() passes NULL for the hyp_vecs start/end if
+	 * we're a guest. Skip the hyp-vectors work.
 	 */
 	if (!hyp_vecs_start) {
 		__this_cpu_write(bp_hardening_data.fn, fn);
@@ -623,6 +624,30 @@ check_branch_predictor(const struct arm64_cpu_capabilities *entry, int scope)
 	return (need_wa > 0);
 }
 
+static const __maybe_unused struct midr_range tx2_family_cpus[] = {
+	MIDR_ALL_VERSIONS(MIDR_BRCM_VULCAN),
+	MIDR_ALL_VERSIONS(MIDR_CAVIUM_THUNDERX2),
+	{},
+};
+
+static bool __maybe_unused
+needs_tx2_tvm_workaround(const struct arm64_cpu_capabilities *entry,
+			 int scope)
+{
+	int i;
+
+	if (!is_affected_midr_range_list(entry, scope) ||
+	    !is_hyp_mode_available())
+		return false;
+
+	for_each_possible_cpu(i) {
+		if (MPIDR_AFFINITY_LEVEL(cpu_logical_map(i), 0) != 0)
+			return true;
+	}
+
+	return false;
+}
+
 #ifdef CONFIG_HARDEN_EL2_VECTORS
 
 static const struct midr_range arm64_harden_el2_vectors[] = {
@@ -851,6 +876,19 @@ const struct arm64_cpu_capabilities arm64_errata[] = {
 		.type = ARM64_CPUCAP_LOCAL_CPU_ERRATUM,
 		.matches = has_cortex_a76_erratum_1463225,
 	},
+#endif
+#ifdef CONFIG_CAVIUM_TX2_ERRATUM_219
+	{
+		.desc = "Cavium ThunderX2 erratum 219 (KVM guest sysreg trapping)",
+		.capability = ARM64_WORKAROUND_CAVIUM_TX2_219_TVM,
+		ERRATA_MIDR_RANGE_LIST(tx2_family_cpus),
+		.matches = needs_tx2_tvm_workaround,
+	},
+	{
+		.desc = "Cavium ThunderX2 erratum 219 (PRFM removal)",
+		.capability = ARM64_WORKAROUND_CAVIUM_TX2_219_PRFM,
+		ERRATA_MIDR_RANGE_LIST(tx2_family_cpus),
+	},
 #endif
 	{
 	}

arch/arm64/kernel/cpufeature.c

@@ -136,6 +136,7 @@ static const struct arm64_ftr_bits ftr_id_aa64isar0[] = {
 
 static const struct arm64_ftr_bits ftr_id_aa64isar1[] = {
 	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_SB_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_FRINTTS_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_PTR_AUTH),
 		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ISAR1_GPI_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_PTR_AUTH),
@@ -175,11 +176,16 @@ static const struct arm64_ftr_bits ftr_id_aa64pfr1[] = {
 };
 
 static const struct arm64_ftr_bits ftr_id_aa64zfr0[] = {
-	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_SM4_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_SHA3_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_BITPERM_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_AES_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_SVEVER_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
+		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_SM4_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
+		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_SHA3_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
+		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_BITPERM_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
+		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_AES_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE_IF_IS_ENABLED(CONFIG_ARM64_SVE),
+		       FTR_STRICT, FTR_LOWER_SAFE, ID_AA64ZFR0_SVEVER_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
 

arch/arm64/kernel/entry.S

@@ -604,7 +604,7 @@ el1_da:
 	 */
 	mrs	x3, far_el1
 	inherit_daif	pstate=x23, tmp=x2
-	clear_address_tag x0, x3
+	untagged_addr	x0, x3
 	mov	x2, sp				// struct pt_regs
 	bl	do_mem_abort
 
@@ -680,7 +680,7 @@ alternative_if ARM64_HAS_IRQ_PRIO_MASKING
 	orr	x24, x24, x0
 alternative_else_nop_endif
 	cbnz	x24, 1f				// preempt count != 0 || NMI return path
-	bl	preempt_schedule_irq		// irq en/disable is done inside
+	bl	arm64_preempt_schedule_irq	// irq en/disable is done inside
 1:
 #endif
 
@@ -775,6 +775,7 @@ el0_sync_compat:
 	b.ge	el0_dbg
 	b	el0_inv
 el0_svc_compat:
+	gic_prio_kentry_setup tmp=x1
 	mov	x0, sp
 	bl	el0_svc_compat_handler
 	b	ret_to_user
@@ -807,7 +808,7 @@ el0_da:
 	mrs	x26, far_el1
 	ct_user_exit_irqoff
 	enable_daif
-	clear_address_tag x0, x26
+	untagged_addr	x0, x26
 	mov	x1, x25
 	mov	x2, sp
 	bl	do_mem_abort
@@ -1070,7 +1071,9 @@ alternative_insn isb, nop, ARM64_WORKAROUND_QCOM_FALKOR_E1003
 #else
 	ldr	x30, =vectors
 #endif
+alternative_if_not ARM64_WORKAROUND_CAVIUM_TX2_219_PRFM
 	prfm	plil1strm, [x30, #(1b - tramp_vectors)]
+alternative_else_nop_endif
 	msr	vbar_el1, x30
 	add	x30, x30, #(1b - tramp_vectors)
 	isb

arch/arm64/kernel/ftrace.c

@@ -121,10 +121,16 @@ int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
 
 			/*
 			 * Ensure updated trampoline is visible to instruction
-			 * fetch before we patch in the branch.
+			 * fetch before we patch in the branch. Although the
+			 * architecture doesn't require an IPI in this case,
+			 * Neoverse-N1 erratum #1542419 does require one
+			 * if the TLB maintenance in module_enable_ro() is
+			 * skipped due to rodata_enabled. It doesn't seem worth
+			 * it to make it conditional given that this is
+			 * certainly not a fast-path.
 			 */
-			__flush_icache_range((unsigned long)&dst[0],
-					     (unsigned long)&dst[1]);
+			flush_icache_range((unsigned long)&dst[0],
+					   (unsigned long)&dst[1]);
 		}
 		addr = (unsigned long)dst;
 #else /* CONFIG_ARM64_MODULE_PLTS */

arch/arm64/kernel/hibernate.c

@@ -201,6 +201,7 @@ static int create_safe_exec_page(void *src_start, size_t length,
 				 gfp_t mask)
 {
 	int rc = 0;
+	pgd_t *trans_pgd;
 	pgd_t *pgdp;
 	pud_t *pudp;
 	pmd_t *pmdp;
@@ -215,7 +216,13 @@ static int create_safe_exec_page(void *src_start, size_t length,
 	memcpy((void *)dst, src_start, length);
 	__flush_icache_range(dst, dst + length);
 
-	pgdp = pgd_offset_raw(allocator(mask), dst_addr);
+	trans_pgd = allocator(mask);
+	if (!trans_pgd) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	pgdp = pgd_offset_raw(trans_pgd, dst_addr);
 	if (pgd_none(READ_ONCE(*pgdp))) {
 		pudp = allocator(mask);
 		if (!pudp) {

arch/arm64/kernel/process.c

@@ -17,6 +17,7 @@
 #include <linux/sched/task.h>
 #include <linux/sched/task_stack.h>
 #include <linux/kernel.h>
+#include <linux/lockdep.h>
 #include <linux/mm.h>
 #include <linux/stddef.h>
 #include <linux/sysctl.h>
@@ -44,6 +45,7 @@
 #include <asm/alternative.h>
 #include <asm/arch_gicv3.h>
 #include <asm/compat.h>
+#include <asm/cpufeature.h>
 #include <asm/cacheflush.h>
 #include <asm/exec.h>
 #include <asm/fpsimd.h>
@@ -332,22 +334,27 @@ void arch_release_task_struct(struct task_struct *tsk)
 	fpsimd_release_task(tsk);
 }
 
-/*
- * src and dst may temporarily have aliased sve_state after task_struct
- * is copied.  We cannot fix this properly here, because src may have
- * live SVE state and dst's thread_info may not exist yet, so tweaking
- * either src's or dst's TIF_SVE is not safe.
- *
- * The unaliasing is done in copy_thread() instead.  This works because
- * dst is not schedulable or traceable until both of these functions
- * have been called.
- */
 int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 {
 	if (current->mm)
 		fpsimd_preserve_current_state();
 	*dst = *src;
 
+	/* We rely on the above assignment to initialize dst's thread_flags: */
+	BUILD_BUG_ON(!IS_ENABLED(CONFIG_THREAD_INFO_IN_TASK));
+
+	/*
+	 * Detach src's sve_state (if any) from dst so that it does not
+	 * get erroneously used or freed prematurely.  dst's sve_state
+	 * will be allocated on demand later on if dst uses SVE.
+	 * For consistency, also clear TIF_SVE here: this could be done
+	 * later in copy_process(), but to avoid tripping up future
+	 * maintainers it is best not to leave TIF_SVE and sve_state in
+	 * an inconsistent state, even temporarily.
+	 */
+	dst->thread.sve_state = NULL;
+	clear_tsk_thread_flag(dst, TIF_SVE);
+
 	return 0;
 }
 
@@ -360,13 +367,6 @@ int copy_thread(unsigned long clone_flags, unsigned long stack_start,
 
 	memset(&p->thread.cpu_context, 0, sizeof(struct cpu_context));
 
-	/*
-	 * Unalias p->thread.sve_state (if any) from the parent task
-	 * and disable discard SVE state for p:
-	 */
-	clear_tsk_thread_flag(p, TIF_SVE);
-	p->thread.sve_state = NULL;
-
 	/*
 	 * In case p was allocated the same task_struct pointer as some
 	 * other recently-exited task, make sure p is disassociated from
@@ -633,3 +633,19 @@ static int __init tagged_addr_init(void)
 
 core_initcall(tagged_addr_init);
 #endif	/* CONFIG_ARM64_TAGGED_ADDR_ABI */
+
+asmlinkage void __sched arm64_preempt_schedule_irq(void)
+{
+	lockdep_assert_irqs_disabled();
+
+	/*
+	 * Preempting a task from an IRQ means we leave copies of PSTATE
+	 * on the stack. cpufeature's enable calls may modify PSTATE, but
+	 * resuming one of these preempted tasks would undo those changes.
+	 *
+	 * Only allow a task to be preempted once cpufeatures have been
+	 * enabled.
+	 */
+	if (static_branch_likely(&arm64_const_caps_ready))
+		preempt_schedule_irq();
+}

arch/arm64/kernel/vdso32/Makefile

@@ -8,15 +8,21 @@
 ARCH_REL_TYPE_ABS := R_ARM_JUMP_SLOT|R_ARM_GLOB_DAT|R_ARM_ABS32
 include $(srctree)/lib/vdso/Makefile
 
-COMPATCC := $(CROSS_COMPILE_COMPAT)gcc
+# Same as cc-*option, but using CC_COMPAT instead of CC
+ifeq ($(CONFIG_CC_IS_CLANG), y)
+CC_COMPAT ?= $(CC)
+else
+CC_COMPAT ?= $(CROSS_COMPILE_COMPAT)gcc
+endif
 
-# Same as cc-*option, but using COMPATCC instead of CC
 cc32-option = $(call try-run,\
-        $(COMPATCC) $(1) -c -x c /dev/null -o "$$TMP",$(1),$(2))
+        $(CC_COMPAT) $(1) -c -x c /dev/null -o "$$TMP",$(1),$(2))
 cc32-disable-warning = $(call try-run,\
-	$(COMPATCC) -W$(strip $(1)) -c -x c /dev/null -o "$$TMP",-Wno-$(strip $(1)))
+	$(CC_COMPAT) -W$(strip $(1)) -c -x c /dev/null -o "$$TMP",-Wno-$(strip $(1)))
 cc32-ldoption = $(call try-run,\
-        $(COMPATCC) $(1) -nostdlib -x c /dev/null -o "$$TMP",$(1),$(2))
+        $(CC_COMPAT) $(1) -nostdlib -x c /dev/null -o "$$TMP",$(1),$(2))
+cc32-as-instr = $(call try-run,\
+	printf "%b\n" "$(1)" | $(CC_COMPAT) $(VDSO_AFLAGS) -c -x assembler -o "$$TMP" -,$(2),$(3))
 
 # We cannot use the global flags to compile the vDSO files, the main reason
 # being that the 32-bit compiler may be older than the main (64-bit) compiler
@@ -25,22 +31,21 @@ cc32-ldoption = $(call try-run,\
 # arm64 one.
 # As a result we set our own flags here.
 
-# From top-level Makefile
-# NOSTDINC_FLAGS
-VDSO_CPPFLAGS := -nostdinc -isystem $(shell $(COMPATCC) -print-file-name=include)
+# KBUILD_CPPFLAGS and NOSTDINC_FLAGS from top-level Makefile
+VDSO_CPPFLAGS := -D__KERNEL__ -nostdinc -isystem $(shell $(CC_COMPAT) -print-file-name=include)
 VDSO_CPPFLAGS += $(LINUXINCLUDE)
-VDSO_CPPFLAGS += $(KBUILD_CPPFLAGS)
 
 # Common C and assembly flags
 # From top-level Makefile
 VDSO_CAFLAGS := $(VDSO_CPPFLAGS)
+ifneq ($(shell $(CC_COMPAT) --version 2>&1 | head -n 1 | grep clang),)
+VDSO_CAFLAGS += --target=$(notdir $(CROSS_COMPILE_COMPAT:%-=%))
+endif
+
 VDSO_CAFLAGS += $(call cc32-option,-fno-PIE)
 ifdef CONFIG_DEBUG_INFO
 VDSO_CAFLAGS += -g
 endif
-ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(COMPATCC)), y)
-VDSO_CAFLAGS += -DCC_HAVE_ASM_GOTO
-endif
 
 # From arm Makefile
 VDSO_CAFLAGS += $(call cc32-option,-fno-dwarf2-cfi-asm)
@@ -55,6 +60,7 @@ endif
 VDSO_CAFLAGS += -fPIC -fno-builtin -fno-stack-protector
 VDSO_CAFLAGS += -DDISABLE_BRANCH_PROFILING
 
+
 # Try to compile for ARMv8. If the compiler is too old and doesn't support it,
 # fall back to v7. There is no easy way to check for what architecture the code
 # is being compiled, so define a macro specifying that (see arch/arm/Makefile).
@@ -91,6 +97,12 @@ VDSO_CFLAGS += -Wno-int-to-pointer-cast
 VDSO_AFLAGS := $(VDSO_CAFLAGS)
 VDSO_AFLAGS += -D__ASSEMBLY__
 
+# Check for binutils support for dmb ishld
+dmbinstr := $(call cc32-as-instr,dmb ishld,-DCONFIG_AS_DMB_ISHLD=1)
+
+VDSO_CFLAGS += $(dmbinstr)
+VDSO_AFLAGS += $(dmbinstr)
+
 VDSO_LDFLAGS := $(VDSO_CPPFLAGS)
 # From arm vDSO Makefile
 VDSO_LDFLAGS += -Wl,-Bsymbolic -Wl,--no-undefined -Wl,-soname=linux-vdso.so.1
@@ -159,14 +171,14 @@ quiet_cmd_vdsold_and_vdso_check = LD32    $@
       cmd_vdsold_and_vdso_check = $(cmd_vdsold); $(cmd_vdso_check)
 
 quiet_cmd_vdsold = LD32    $@
-      cmd_vdsold = $(COMPATCC) -Wp,-MD,$(depfile) $(VDSO_LDFLAGS) \
+      cmd_vdsold = $(CC_COMPAT) -Wp,-MD,$(depfile) $(VDSO_LDFLAGS) \
                    -Wl,-T $(filter %.lds,$^) $(filter %.o,$^) -o $@
 quiet_cmd_vdsocc = CC32    $@
-      cmd_vdsocc = $(COMPATCC) -Wp,-MD,$(depfile) $(VDSO_CFLAGS) -c -o $@ $<
+      cmd_vdsocc = $(CC_COMPAT) -Wp,-MD,$(depfile) $(VDSO_CFLAGS) -c -o $@ $<
 quiet_cmd_vdsocc_gettimeofday = CC32    $@
-      cmd_vdsocc_gettimeofday = $(COMPATCC) -Wp,-MD,$(depfile) $(VDSO_CFLAGS) $(VDSO_CFLAGS_gettimeofday_o) -c -o $@ $<
+      cmd_vdsocc_gettimeofday = $(CC_COMPAT) -Wp,-MD,$(depfile) $(VDSO_CFLAGS) $(VDSO_CFLAGS_gettimeofday_o) -c -o $@ $<
 quiet_cmd_vdsoas = AS32    $@
-      cmd_vdsoas = $(COMPATCC) -Wp,-MD,$(depfile) $(VDSO_AFLAGS) -c -o $@ $<
+      cmd_vdsoas = $(CC_COMPAT) -Wp,-MD,$(depfile) $(VDSO_AFLAGS) -c -o $@ $<
 
 quiet_cmd_vdsomunge = MUNGE   $@
       cmd_vdsomunge = $(obj)/$(munge) $< $@

arch/arm64/kvm/hyp/switch.c

@@ -124,6 +124,9 @@ static void __hyp_text __activate_traps(struct kvm_vcpu *vcpu)
 {
 	u64 hcr = vcpu->arch.hcr_el2;
 
+	if (cpus_have_const_cap(ARM64_WORKAROUND_CAVIUM_TX2_219_TVM))
+		hcr |= HCR_TVM;
+
 	write_sysreg(hcr, hcr_el2);
 
 	if (cpus_have_const_cap(ARM64_HAS_RAS_EXTN) && (hcr & HCR_VSE))
@@ -174,8 +177,10 @@ static void __hyp_text __deactivate_traps(struct kvm_vcpu *vcpu)
 	 * the crucial bit is "On taking a vSError interrupt,
 	 * HCR_EL2.VSE is cleared to 0."
 	 */
-	if (vcpu->arch.hcr_el2 & HCR_VSE)
-		vcpu->arch.hcr_el2 = read_sysreg(hcr_el2);
+	if (vcpu->arch.hcr_el2 & HCR_VSE) {
+		vcpu->arch.hcr_el2 &= ~HCR_VSE;
+		vcpu->arch.hcr_el2 |= read_sysreg(hcr_el2) & HCR_VSE;
+	}
 
 	if (has_vhe())
 		deactivate_traps_vhe();
@@ -380,6 +385,61 @@ static bool __hyp_text __hyp_handle_fpsimd(struct kvm_vcpu *vcpu)
 	return true;
 }
 
+static bool __hyp_text handle_tx2_tvm(struct kvm_vcpu *vcpu)
+{
+	u32 sysreg = esr_sys64_to_sysreg(kvm_vcpu_get_hsr(vcpu));
+	int rt = kvm_vcpu_sys_get_rt(vcpu);
+	u64 val = vcpu_get_reg(vcpu, rt);
+
+	/*
+	 * The normal sysreg handling code expects to see the traps,
+	 * let's not do anything here.
+	 */
+	if (vcpu->arch.hcr_el2 & HCR_TVM)
+		return false;
+
+	switch (sysreg) {
+	case SYS_SCTLR_EL1:
+		write_sysreg_el1(val, SYS_SCTLR);
+		break;
+	case SYS_TTBR0_EL1:
+		write_sysreg_el1(val, SYS_TTBR0);
+		break;
+	case SYS_TTBR1_EL1:
+		write_sysreg_el1(val, SYS_TTBR1);
+		break;
+	case SYS_TCR_EL1:
+		write_sysreg_el1(val, SYS_TCR);
+		break;
+	case SYS_ESR_EL1:
+		write_sysreg_el1(val, SYS_ESR);
+		break;
+	case SYS_FAR_EL1:
+		write_sysreg_el1(val, SYS_FAR);
+		break;
+	case SYS_AFSR0_EL1:
+		write_sysreg_el1(val, SYS_AFSR0);
+		break;
+	case SYS_AFSR1_EL1:
+		write_sysreg_el1(val, SYS_AFSR1);
+		break;
+	case SYS_MAIR_EL1:
+		write_sysreg_el1(val, SYS_MAIR);
+		break;
+	case SYS_AMAIR_EL1:
+		write_sysreg_el1(val, SYS_AMAIR);
+		break;
+	case SYS_CONTEXTIDR_EL1:
+		write_sysreg_el1(val, SYS_CONTEXTIDR);
+		break;
+	default:
+		return false;
+	}
+
+	__kvm_skip_instr(vcpu);
+	return true;
+}
+
 /*
  * Return true when we were able to fixup the guest exit and should return to
  * the guest, false when we should restore the host state and return to the
@@ -399,6 +459,11 @@ static bool __hyp_text fixup_guest_exit(struct kvm_vcpu *vcpu, u64 *exit_code)
 	if (*exit_code != ARM_EXCEPTION_TRAP)
 		goto exit;
 
+	if (cpus_have_const_cap(ARM64_WORKAROUND_CAVIUM_TX2_219_TVM) &&
+	    kvm_vcpu_trap_get_class(vcpu) == ESR_ELx_EC_SYS64 &&
+	    handle_tx2_tvm(vcpu))
+		return true;
+
 	/*
 	 * We trap the first access to the FP/SIMD to save the host context
 	 * and restore the guest context lazily.

arch/arm64/mm/fault.c

@@ -113,6 +113,15 @@ static inline bool is_ttbr1_addr(unsigned long addr)
 	return arch_kasan_reset_tag(addr) >= PAGE_OFFSET;
 }
 
+static inline unsigned long mm_to_pgd_phys(struct mm_struct *mm)
+{
+	/* Either init_pg_dir or swapper_pg_dir */
+	if (mm == &init_mm)
+		return __pa_symbol(mm->pgd);
+
+	return (unsigned long)virt_to_phys(mm->pgd);
+}
+
 /*
  * Dump out the page tables associated with 'addr' in the currently active mm.
  */
@@ -141,7 +150,7 @@ static void show_pte(unsigned long addr)
 
 	pr_alert("%s pgtable: %luk pages, %llu-bit VAs, pgdp=%016lx\n",
 		 mm == &init_mm ? "swapper" : "user", PAGE_SIZE / SZ_1K,
-		 vabits_actual, (unsigned long)virt_to_phys(mm->pgd));
+		 vabits_actual, mm_to_pgd_phys(mm));
 	pgdp = pgd_offset(mm, addr);
 	pgd = READ_ONCE(*pgdp);
 	pr_alert("[%016lx] pgd=%016llx", addr, pgd_val(pgd));
@@ -259,14 +268,18 @@ static bool __kprobes is_spurious_el1_translation_fault(unsigned long addr,
 	par = read_sysreg(par_el1);
 	local_irq_restore(flags);
 
+	/*
+	 * If we now have a valid translation, treat the translation fault as
+	 * spurious.
+	 */
 	if (!(par & SYS_PAR_EL1_F))
-		return false;
+		return true;
 
 	/*
 	 * If we got a different type of fault from the AT instruction,
 	 * treat the translation fault as spurious.
 	 */
-	dfsc = FIELD_PREP(SYS_PAR_EL1_FST, par);
+	dfsc = FIELD_GET(SYS_PAR_EL1_FST, par);
 	return (dfsc & ESR_ELx_FSC_TYPE) != ESR_ELx_FSC_FAULT;
 }
 

arch/mips/configs/mtx1_defconfig

@@ -571,7 +571,6 @@ CONFIG_USB_SERIAL_OMNINET=m
 CONFIG_USB_EMI62=m
 CONFIG_USB_EMI26=m
 CONFIG_USB_ADUTUX=m
-CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_CYPRESS_CY7C63=m

arch/mips/configs/rm200_defconfig

@@ -314,7 +314,6 @@ CONFIG_USB_SERIAL_SAFE_PADDED=y
 CONFIG_USB_SERIAL_CYBERJACK=m
 CONFIG_USB_SERIAL_XIRCOM=m
 CONFIG_USB_SERIAL_OMNINET=m
-CONFIG_USB_RIO500=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_CYTHERM=m

arch/mips/fw/sni/sniprom.c

@@ -43,7 +43,7 @@
 
 /* O32 stack has to be 8-byte aligned. */
 static u64 o32_stk[4096];
-#define O32_STK	  &o32_stk[sizeof(o32_stk)]
+#define O32_STK	  (&o32_stk[ARRAY_SIZE(o32_stk)])
 
 #define __PROM_O32(fun, arg) fun arg __asm__(#fun); \
 				     __asm__(#fun " = call_o32")

arch/mips/include/asm/cmpxchg.h

@@ -77,8 +77,8 @@ extern unsigned long __xchg_called_with_bad_pointer(void)
 extern unsigned long __xchg_small(volatile void *ptr, unsigned long val,
 				  unsigned int size);
 
-static inline unsigned long __xchg(volatile void *ptr, unsigned long x,
-				   int size)
+static __always_inline
+unsigned long __xchg(volatile void *ptr, unsigned long x, int size)
 {
 	switch (size) {
 	case 1:
@@ -153,8 +153,9 @@ static inline unsigned long __xchg(volatile void *ptr, unsigned long x,
 extern unsigned long __cmpxchg_small(volatile void *ptr, unsigned long old,
 				     unsigned long new, unsigned int size);
 
-static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
-				      unsigned long new, unsigned int size)
+static __always_inline
+unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
+			unsigned long new, unsigned int size)
 {
 	switch (size) {
 	case 1:

arch/mips/include/uapi/asm/hwcap.h

@@ -6,5 +6,16 @@
 #define HWCAP_MIPS_R6		(1 << 0)
 #define HWCAP_MIPS_MSA		(1 << 1)
 #define HWCAP_MIPS_CRC32	(1 << 2)
+#define HWCAP_MIPS_MIPS16	(1 << 3)
+#define HWCAP_MIPS_MDMX     (1 << 4)
+#define HWCAP_MIPS_MIPS3D   (1 << 5)
+#define HWCAP_MIPS_SMARTMIPS (1 << 6)
+#define HWCAP_MIPS_DSP      (1 << 7)
+#define HWCAP_MIPS_DSP2     (1 << 8)
+#define HWCAP_MIPS_DSP3     (1 << 9)
+#define HWCAP_MIPS_MIPS16E2 (1 << 10)
+#define HWCAP_LOONGSON_MMI  (1 << 11)
+#define HWCAP_LOONGSON_EXT  (1 << 12)
+#define HWCAP_LOONGSON_EXT2 (1 << 13)
 
 #endif /* _UAPI_ASM_HWCAP_H */

arch/mips/kernel/cpu-probe.c

@@ -2180,6 +2180,39 @@ void cpu_probe(void)
 		elf_hwcap |= HWCAP_MIPS_MSA;
 	}
 
+	if (cpu_has_mips16)
+		elf_hwcap |= HWCAP_MIPS_MIPS16;
+
+	if (cpu_has_mdmx)
+		elf_hwcap |= HWCAP_MIPS_MDMX;
+
+	if (cpu_has_mips3d)
+		elf_hwcap |= HWCAP_MIPS_MIPS3D;
+
+	if (cpu_has_smartmips)
+		elf_hwcap |= HWCAP_MIPS_SMARTMIPS;
+
+	if (cpu_has_dsp)
+		elf_hwcap |= HWCAP_MIPS_DSP;
+
+	if (cpu_has_dsp2)
+		elf_hwcap |= HWCAP_MIPS_DSP2;
+
+	if (cpu_has_dsp3)
+		elf_hwcap |= HWCAP_MIPS_DSP3;
+
+	if (cpu_has_mips16e2)
+		elf_hwcap |= HWCAP_MIPS_MIPS16E2;
+
+	if (cpu_has_loongson_mmi)
+		elf_hwcap |= HWCAP_LOONGSON_MMI;
+
+	if (cpu_has_loongson_ext)
+		elf_hwcap |= HWCAP_LOONGSON_EXT;
+
+	if (cpu_has_loongson_ext2)
+		elf_hwcap |= HWCAP_LOONGSON_EXT2;
+
 	if (cpu_has_vz)
 		cpu_probe_vz(c);
 

arch/mips/loongson64/Platform

@@ -66,6 +66,10 @@ else
       $(call cc-option,-march=mips64r2,-mips64r2 -U_MIPS_ISA -D_MIPS_ISA=_MIPS_ISA_MIPS64)
 endif
 
+# Some -march= flags enable MMI instructions, and GCC complains about that
+# support being enabled alongside -msoft-float. Thus explicitly disable MMI.
+cflags-y += $(call cc-option,-mno-loongson-mmi)
+
 #
 # Loongson Machines' Support
 #

arch/mips/vdso/Makefile

@@ -15,6 +15,7 @@ ccflags-vdso := \
 	$(filter -mmicromips,$(KBUILD_CFLAGS)) \
 	$(filter -march=%,$(KBUILD_CFLAGS)) \
 	$(filter -m%-float,$(KBUILD_CFLAGS)) \
+	$(filter -mno-loongson-%,$(KBUILD_CFLAGS)) \
 	-D__VDSO__
 
 ifdef CONFIG_CC_IS_CLANG

arch/parisc/include/asm/cache.h

@@ -22,7 +22,7 @@
 
 #define ARCH_DMA_MINALIGN	L1_CACHE_BYTES
 
-#define __read_mostly __attribute__((__section__(".data..read_mostly")))
+#define __read_mostly __section(.data..read_mostly)
 
 void parisc_cache_init(void);	/* initializes cache-flushing */
 void disable_sr_hashing_asm(int); /* low level support for above */

arch/parisc/include/asm/ldcw.h

@@ -52,7 +52,7 @@
 })
 
 #ifdef CONFIG_SMP
-# define __lock_aligned __attribute__((__section__(".data..lock_aligned")))
+# define __lock_aligned __section(.data..lock_aligned)
 #endif
 
 #endif /* __PARISC_LDCW_H */

arch/parisc/mm/ioremap.c

@@ -3,7 +3,7 @@
  * arch/parisc/mm/ioremap.c
  *
  * (C) Copyright 1995 1996 Linus Torvalds
- * (C) Copyright 2001-2006 Helge Deller <deller@gmx.de>
+ * (C) Copyright 2001-2019 Helge Deller <deller@gmx.de>
  * (C) Copyright 2005 Kyle McMartin <kyle@parisc-linux.org>
  */
 
@@ -84,7 +84,7 @@ void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned l
 	addr = (void __iomem *) area->addr;
 	if (ioremap_page_range((unsigned long)addr, (unsigned long)addr + size,
 			       phys_addr, pgprot)) {
-		vfree(addr);
+		vunmap(addr);
 		return NULL;
 	}
 
@@ -92,9 +92,11 @@ void __iomem * __ioremap(unsigned long phys_addr, unsigned long size, unsigned l
 }
 EXPORT_SYMBOL(__ioremap);
 
-void iounmap(const volatile void __iomem *addr)
+void iounmap(const volatile void __iomem *io_addr)
 {
-	if (addr > high_memory)
-		return vfree((void *) (PAGE_MASK & (unsigned long __force) addr));
+	unsigned long addr = (unsigned long)io_addr & PAGE_MASK;
+
+	if (is_vmalloc_addr((void *)addr))
+		vunmap((void *)addr);
 }
 EXPORT_SYMBOL(iounmap);

arch/powerpc/include/asm/book3s/64/tlbflush-radix.h

@@ -35,6 +35,10 @@ static inline void radix__flush_all_lpid(unsigned int lpid)
 {
 	WARN_ON(1);
 }
+static inline void radix__flush_all_lpid_guest(unsigned int lpid)
+{
+	WARN_ON(1);
+}
 #endif
 
 extern void radix__flush_hugetlb_tlb_range(struct vm_area_struct *vma,

arch/powerpc/kvm/book3s_hv_rmhandlers.S

@@ -1921,6 +1921,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
 	mtspr	SPRN_PCR, r6
 18:
 	/* Signal secondary CPUs to continue */
+	li	r0, 0
 	stb	r0,VCORE_IN_GUEST(r5)
 19:	lis	r8,0x7fff		/* MAX_INT@h */
 	mtspr	SPRN_HDEC,r8

arch/powerpc/platforms/cell/spufs/inode.c

@@ -761,6 +761,7 @@ static int spufs_init_fs_context(struct fs_context *fc)
 	ctx->gid = current_gid();
 	ctx->mode = 0755;
 
+	fc->fs_private = ctx;
 	fc->s_fs_info = sbi;
 	fc->ops = &spufs_context_ops;
 	return 0;

arch/powerpc/platforms/pseries/lpar.c

@@ -1419,6 +1419,9 @@ void __init pseries_lpar_read_hblkrm_characteristics(void)
 	unsigned char local_buffer[SPLPAR_TLB_BIC_MAXLENGTH];
 	int call_status, len, idx, bpsize;
 
+	if (!firmware_has_feature(FW_FEATURE_BLOCK_REMOVE))
+		return;
+
 	spin_lock(&rtas_data_buf_lock);
 	memset(rtas_data_buf, 0, RTAS_DATA_BUF_SIZE);
 	call_status = rtas_call(rtas_token("ibm,get-system-parameter"), 3, 1,

arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts

@@ -13,6 +13,7 @@
 	compatible = "sifive,hifive-unleashed-a00", "sifive,fu540-c000";
 
 	chosen {
+		stdout-path = "serial0";
 	};
 
 	cpus {

arch/riscv/include/asm/pgtable.h

@@ -87,14 +87,6 @@ extern pgd_t swapper_pg_dir[];
 #define VMALLOC_END      (PAGE_OFFSET - 1)
 #define VMALLOC_START    (PAGE_OFFSET - VMALLOC_SIZE)
 
-#define FIXADDR_TOP      VMALLOC_START
-#ifdef CONFIG_64BIT
-#define FIXADDR_SIZE     PMD_SIZE
-#else
-#define FIXADDR_SIZE     PGDIR_SIZE
-#endif
-#define FIXADDR_START    (FIXADDR_TOP - FIXADDR_SIZE)
-
 /*
  * Roughly size the vmemmap space to be large enough to fit enough
  * struct pages to map half the virtual address space. Then
@@ -108,6 +100,14 @@ extern pgd_t swapper_pg_dir[];
 
 #define vmemmap		((struct page *)VMEMMAP_START)
 
+#define FIXADDR_TOP      (VMEMMAP_START)
+#ifdef CONFIG_64BIT
+#define FIXADDR_SIZE     PMD_SIZE
+#else
+#define FIXADDR_SIZE     PGDIR_SIZE
+#endif
+#define FIXADDR_START    (FIXADDR_TOP - FIXADDR_SIZE)
+
 /*
  * ZERO_PAGE is a global shared page that is always zero,
  * used for zero-mapped memory areas, etc.

arch/riscv/include/asm/tlbflush.h

@@ -10,10 +10,6 @@
 #include <linux/mm_types.h>
 #include <asm/smp.h>
 
-/*
- * Flush entire local TLB.  'sfence.vma' implicitly fences with the instruction
- * cache as well, so a 'fence.i' is not necessary.
- */
 static inline void local_flush_tlb_all(void)
 {
 	__asm__ __volatile__ ("sfence.vma" : : : "memory");

arch/riscv/kernel/entry.S

@@ -273,12 +273,11 @@ restore_all:
 resume_kernel:
 	REG_L s0, TASK_TI_PREEMPT_COUNT(tp)
 	bnez s0, restore_all
-need_resched:
 	REG_L s0, TASK_TI_FLAGS(tp)
 	andi s0, s0, _TIF_NEED_RESCHED
 	beqz s0, restore_all
 	call preempt_schedule_irq
-	j need_resched
+	j restore_all
 #endif
 
 work_pending:

arch/riscv/kernel/traps.c

@@ -124,24 +124,24 @@ static inline unsigned long get_break_insn_length(unsigned long pc)
 
 asmlinkage void do_trap_break(struct pt_regs *regs)
 {
+	if (user_mode(regs)) {
+		force_sig_fault(SIGTRAP, TRAP_BRKPT,
+				(void __user *)(regs->sepc));
+		return;
+	}
 #ifdef CONFIG_GENERIC_BUG
-	if (!user_mode(regs)) {
+	{
 		enum bug_trap_type type;
 
 		type = report_bug(regs->sepc, regs);
-		switch (type) {
-		case BUG_TRAP_TYPE_NONE:
-			break;
-		case BUG_TRAP_TYPE_WARN:
+		if (type == BUG_TRAP_TYPE_WARN) {
 			regs->sepc += get_break_insn_length(regs->sepc);
-			break;
-		case BUG_TRAP_TYPE_BUG:
-			die(regs, "Kernel BUG");
+			return;
 		}
 	}
 #endif /* CONFIG_GENERIC_BUG */
 
-	force_sig_fault(SIGTRAP, TRAP_BRKPT, (void __user *)(regs->sepc));
+	die(regs, "Kernel BUG");
 }
 
 #ifdef CONFIG_GENERIC_BUG

arch/s390/include/asm/uaccess.h

@@ -83,7 +83,7 @@ raw_copy_to_user(void __user *to, const void *from, unsigned long n);
 	__rc;							\
 })
 
-static inline int __put_user_fn(void *x, void __user *ptr, unsigned long size)
+static __always_inline int __put_user_fn(void *x, void __user *ptr, unsigned long size)
 {
 	unsigned long spec = 0x010000UL;
 	int rc;
@@ -113,7 +113,7 @@ static inline int __put_user_fn(void *x, void __user *ptr, unsigned long size)
 	return rc;
 }
 
-static inline int __get_user_fn(void *x, const void __user *ptr, unsigned long size)
+static __always_inline int __get_user_fn(void *x, const void __user *ptr, unsigned long size)
 {
 	unsigned long spec = 0x01UL;
 	int rc;

arch/sparc/Kconfig

@@ -29,7 +29,6 @@ config SPARC
 	select RTC_DRV_M48T59
 	select RTC_SYSTOHC
 	select HAVE_ARCH_JUMP_LABEL if SPARC64
-	select HAVE_FAST_GUP if SPARC64
 	select GENERIC_IRQ_SHOW
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select GENERIC_PCI_IOMAP

arch/x86/boot/compressed/acpi.c

@@ -20,30 +20,6 @@
  */
 struct mem_vector immovable_mem[MAX_NUMNODES*2];
 
-/*
- * Max length of 64-bit hex address string is 19, prefix "0x" + 16 hex
- * digits, and '\0' for termination.
- */
-#define MAX_ADDR_LEN 19
-
-static acpi_physical_address get_cmdline_acpi_rsdp(void)
-{
-	acpi_physical_address addr = 0;
-
-#ifdef CONFIG_KEXEC
-	char val[MAX_ADDR_LEN] = { };
-	int ret;
-
-	ret = cmdline_find_option("acpi_rsdp", val, MAX_ADDR_LEN);
-	if (ret < 0)
-		return 0;
-
-	if (kstrtoull(val, 16, &addr))
-		return 0;
-#endif
-	return addr;
-}
-
 /*
  * Search EFI system tables for RSDP.  If both ACPI_20_TABLE_GUID and
  * ACPI_TABLE_GUID are found, take the former, which has more features.
@@ -298,6 +274,30 @@ acpi_physical_address get_rsdp_addr(void)
 }
 
 #if defined(CONFIG_RANDOMIZE_BASE) && defined(CONFIG_MEMORY_HOTREMOVE)
+/*
+ * Max length of 64-bit hex address string is 19, prefix "0x" + 16 hex
+ * digits, and '\0' for termination.
+ */
+#define MAX_ADDR_LEN 19
+
+static acpi_physical_address get_cmdline_acpi_rsdp(void)
+{
+	acpi_physical_address addr = 0;
+
+#ifdef CONFIG_KEXEC
+	char val[MAX_ADDR_LEN] = { };
+	int ret;
+
+	ret = cmdline_find_option("acpi_rsdp", val, MAX_ADDR_LEN);
+	if (ret < 0)
+		return 0;
+
+	if (kstrtoull(val, 16, &addr))
+		return 0;
+#endif
+	return addr;
+}
+
 /* Compute SRAT address from RSDP. */
 static unsigned long get_acpi_srat_table(void)
 {

arch/x86/boot/compressed/misc.c

@@ -345,6 +345,7 @@ asmlinkage __visible void *extract_kernel(void *rmode, memptr heap,
 {
 	const unsigned long kernel_total_size = VO__end - VO__text;
 	unsigned long virt_addr = LOAD_PHYSICAL_ADDR;
+	unsigned long needed_size;
 
 	/* Retain x86 boot parameters pointer passed from startup_32/64. */
 	boot_params = rmode;
@@ -379,26 +380,38 @@ asmlinkage __visible void *extract_kernel(void *rmode, memptr heap,
 	free_mem_ptr     = heap;	/* Heap */
 	free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
 
+	/*
+	 * The memory hole needed for the kernel is the larger of either
+	 * the entire decompressed kernel plus relocation table, or the
+	 * entire decompressed kernel plus .bss and .brk sections.
+	 *
+	 * On X86_64, the memory is mapped with PMD pages. Round the
+	 * size up so that the full extent of PMD pages mapped is
+	 * included in the check against the valid memory table
+	 * entries. This ensures the full mapped area is usable RAM
+	 * and doesn't include any reserved areas.
+	 */
+	needed_size = max(output_len, kernel_total_size);
+#ifdef CONFIG_X86_64
+	needed_size = ALIGN(needed_size, MIN_KERNEL_ALIGN);
+#endif
+
 	/* Report initial kernel position details. */
 	debug_putaddr(input_data);
 	debug_putaddr(input_len);
 	debug_putaddr(output);
 	debug_putaddr(output_len);
 	debug_putaddr(kernel_total_size);
+	debug_putaddr(needed_size);
 
 #ifdef CONFIG_X86_64
 	/* Report address of 32-bit trampoline */
 	debug_putaddr(trampoline_32bit);
 #endif
 
-	/*
-	 * The memory hole needed for the kernel is the larger of either
-	 * the entire decompressed kernel plus relocation table, or the
-	 * entire decompressed kernel plus .bss and .brk sections.
-	 */
 	choose_random_location((unsigned long)input_data, input_len,
 				(unsigned long *)&output,
-				max(output_len, kernel_total_size),
+				needed_size,
 				&virt_addr);
 
 	/* Validate memory location choices. */

arch/x86/events/amd/core.c

@@ -5,12 +5,14 @@
 #include <linux/init.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
+#include <linux/jiffies.h>
 #include <asm/apicdef.h>
 #include <asm/nmi.h>
 
 #include "../perf_event.h"
 
-static DEFINE_PER_CPU(unsigned int, perf_nmi_counter);
+static DEFINE_PER_CPU(unsigned long, perf_nmi_tstamp);
+static unsigned long perf_nmi_window;
 
 static __initconst const u64 amd_hw_cache_event_ids
 				[PERF_COUNT_HW_CACHE_MAX]
@@ -641,11 +643,12 @@ static void amd_pmu_disable_event(struct perf_event *event)
  * handler when multiple PMCs are active or PMC overflow while handling some
  * other source of an NMI.
  *
- * Attempt to mitigate this by using the number of active PMCs to determine
- * whether to return NMI_HANDLED if the perf NMI handler did not handle/reset
- * any PMCs. The per-CPU perf_nmi_counter variable is set to a minimum of the
- * number of active PMCs or 2. The value of 2 is used in case an NMI does not
- * arrive at the LAPIC in time to be collapsed into an already pending NMI.
+ * Attempt to mitigate this by creating an NMI window in which un-handled NMIs
+ * received during this window will be claimed. This prevents extending the
+ * window past when it is possible that latent NMIs should be received. The
+ * per-CPU perf_nmi_tstamp will be set to the window end time whenever perf has
+ * handled a counter. When an un-handled NMI is received, it will be claimed
+ * only if arriving within that window.
  */
 static int amd_pmu_handle_irq(struct pt_regs *regs)
 {
@@ -663,21 +666,19 @@ static int amd_pmu_handle_irq(struct pt_regs *regs)
 	handled = x86_pmu_handle_irq(regs);
 
 	/*
-	 * If a counter was handled, record the number of possible remaining
-	 * NMIs that can occur.
+	 * If a counter was handled, record a timestamp such that un-handled
+	 * NMIs will be claimed if arriving within that window.
 	 */
 	if (handled) {
-		this_cpu_write(perf_nmi_counter,
-			       min_t(unsigned int, 2, active));
+		this_cpu_write(perf_nmi_tstamp,
+			       jiffies + perf_nmi_window);
 
 		return handled;
 	}
 
-	if (!this_cpu_read(perf_nmi_counter))
+	if (time_after(jiffies, this_cpu_read(perf_nmi_tstamp)))
 		return NMI_DONE;
 
-	this_cpu_dec(perf_nmi_counter);
-
 	return NMI_HANDLED;
 }
 
@@ -909,6 +910,9 @@ static int __init amd_core_pmu_init(void)
 	if (!boot_cpu_has(X86_FEATURE_PERFCTR_CORE))
 		return 0;
 
+	/* Avoid calulating the value each time in the NMI handler */
+	perf_nmi_window = msecs_to_jiffies(100);
+
 	switch (boot_cpu_data.x86) {
 	case 0x15:
 		pr_cont("Fam15h ");

arch/x86/events/intel/core.c

@@ -4983,6 +4983,8 @@ __init int intel_pmu_init(void)
 	case INTEL_FAM6_SKYLAKE:
 	case INTEL_FAM6_KABYLAKE_L:
 	case INTEL_FAM6_KABYLAKE:
+	case INTEL_FAM6_COMETLAKE_L:
+	case INTEL_FAM6_COMETLAKE:
 		x86_add_quirk(intel_pebs_isolation_quirk);
 		x86_pmu.late_ack = true;
 		memcpy(hw_cache_event_ids, skl_hw_cache_event_ids, sizeof(hw_cache_event_ids));
@@ -5031,6 +5033,8 @@ __init int intel_pmu_init(void)
 		/* fall through */
 	case INTEL_FAM6_ICELAKE_L:
 	case INTEL_FAM6_ICELAKE:
+	case INTEL_FAM6_TIGERLAKE_L:
+	case INTEL_FAM6_TIGERLAKE:
 		x86_pmu.late_ack = true;
 		memcpy(hw_cache_event_ids, skl_hw_cache_event_ids, sizeof(hw_cache_event_ids));
 		memcpy(hw_cache_extra_regs, skl_hw_cache_extra_regs, sizeof(hw_cache_extra_regs));

arch/x86/events/intel/cstate.c

@@ -45,46 +45,49 @@
  *	MSR_CORE_C3_RESIDENCY: CORE C3 Residency Counter
  *			       perf code: 0x01
  *			       Available model: NHM,WSM,SNB,IVB,HSW,BDW,SKL,GLM,
-						CNL
+ *						CNL,KBL,CML
  *			       Scope: Core
  *	MSR_CORE_C6_RESIDENCY: CORE C6 Residency Counter
  *			       perf code: 0x02
  *			       Available model: SLM,AMT,NHM,WSM,SNB,IVB,HSW,BDW,
- *						SKL,KNL,GLM,CNL
+ *						SKL,KNL,GLM,CNL,KBL,CML,ICL,TGL
  *			       Scope: Core
  *	MSR_CORE_C7_RESIDENCY: CORE C7 Residency Counter
  *			       perf code: 0x03
- *			       Available model: SNB,IVB,HSW,BDW,SKL,CNL
+ *			       Available model: SNB,IVB,HSW,BDW,SKL,CNL,KBL,CML,
+ *						ICL,TGL
  *			       Scope: Core
  *	MSR_PKG_C2_RESIDENCY:  Package C2 Residency Counter.
  *			       perf code: 0x00
- *			       Available model: SNB,IVB,HSW,BDW,SKL,KNL,GLM,CNL
+ *			       Available model: SNB,IVB,HSW,BDW,SKL,KNL,GLM,CNL,
+ *						KBL,CML,ICL,TGL
  *			       Scope: Package (physical package)
  *	MSR_PKG_C3_RESIDENCY:  Package C3 Residency Counter.
  *			       perf code: 0x01
  *			       Available model: NHM,WSM,SNB,IVB,HSW,BDW,SKL,KNL,
- *						GLM,CNL
+ *						GLM,CNL,KBL,CML,ICL,TGL
  *			       Scope: Package (physical package)
  *	MSR_PKG_C6_RESIDENCY:  Package C6 Residency Counter.
  *			       perf code: 0x02
  *			       Available model: SLM,AMT,NHM,WSM,SNB,IVB,HSW,BDW
- *						SKL,KNL,GLM,CNL
+ *						SKL,KNL,GLM,CNL,KBL,CML,ICL,TGL
  *			       Scope: Package (physical package)
  *	MSR_PKG_C7_RESIDENCY:  Package C7 Residency Counter.
  *			       perf code: 0x03
- *			       Available model: NHM,WSM,SNB,IVB,HSW,BDW,SKL,CNL
+ *			       Available model: NHM,WSM,SNB,IVB,HSW,BDW,SKL,CNL,
+ *						KBL,CML,ICL,TGL
  *			       Scope: Package (physical package)
  *	MSR_PKG_C8_RESIDENCY:  Package C8 Residency Counter.
  *			       perf code: 0x04
- *			       Available model: HSW ULT,KBL,CNL
+ *			       Available model: HSW ULT,KBL,CNL,CML,ICL,TGL
  *			       Scope: Package (physical package)
  *	MSR_PKG_C9_RESIDENCY:  Package C9 Residency Counter.
  *			       perf code: 0x05
- *			       Available model: HSW ULT,KBL,CNL
+ *			       Available model: HSW ULT,KBL,CNL,CML,ICL,TGL
  *			       Scope: Package (physical package)
  *	MSR_PKG_C10_RESIDENCY: Package C10 Residency Counter.
  *			       perf code: 0x06
- *			       Available model: HSW ULT,KBL,GLM,CNL
+ *			       Available model: HSW ULT,KBL,GLM,CNL,CML,ICL,TGL
  *			       Scope: Package (physical package)
  *
  */
@@ -544,6 +547,19 @@ static const struct cstate_model cnl_cstates __initconst = {
 				  BIT(PERF_CSTATE_PKG_C10_RES),
 };
 
+static const struct cstate_model icl_cstates __initconst = {
+	.core_events		= BIT(PERF_CSTATE_CORE_C6_RES) |
+				  BIT(PERF_CSTATE_CORE_C7_RES),
+
+	.pkg_events		= BIT(PERF_CSTATE_PKG_C2_RES) |
+				  BIT(PERF_CSTATE_PKG_C3_RES) |
+				  BIT(PERF_CSTATE_PKG_C6_RES) |
+				  BIT(PERF_CSTATE_PKG_C7_RES) |
+				  BIT(PERF_CSTATE_PKG_C8_RES) |
+				  BIT(PERF_CSTATE_PKG_C9_RES) |
+				  BIT(PERF_CSTATE_PKG_C10_RES),
+};
+
 static const struct cstate_model slm_cstates __initconst = {
 	.core_events		= BIT(PERF_CSTATE_CORE_C1_RES) |
 				  BIT(PERF_CSTATE_CORE_C6_RES),
@@ -614,6 +630,8 @@ static const struct x86_cpu_id intel_cstates_match[] __initconst = {
 
 	X86_CSTATES_MODEL(INTEL_FAM6_KABYLAKE_L, hswult_cstates),
 	X86_CSTATES_MODEL(INTEL_FAM6_KABYLAKE,   hswult_cstates),
+	X86_CSTATES_MODEL(INTEL_FAM6_COMETLAKE_L, hswult_cstates),
+	X86_CSTATES_MODEL(INTEL_FAM6_COMETLAKE, hswult_cstates),
 
 	X86_CSTATES_MODEL(INTEL_FAM6_CANNONLAKE_L, cnl_cstates),
 
@@ -625,8 +643,10 @@ static const struct x86_cpu_id intel_cstates_match[] __initconst = {
 
 	X86_CSTATES_MODEL(INTEL_FAM6_ATOM_GOLDMONT_PLUS, glm_cstates),
 
-	X86_CSTATES_MODEL(INTEL_FAM6_ICELAKE_L, snb_cstates),
-	X86_CSTATES_MODEL(INTEL_FAM6_ICELAKE,   snb_cstates),
+	X86_CSTATES_MODEL(INTEL_FAM6_ICELAKE_L, icl_cstates),
+	X86_CSTATES_MODEL(INTEL_FAM6_ICELAKE,   icl_cstates),
+	X86_CSTATES_MODEL(INTEL_FAM6_TIGERLAKE_L, icl_cstates),
+	X86_CSTATES_MODEL(INTEL_FAM6_TIGERLAKE, icl_cstates),
 	{ },
 };
 MODULE_DEVICE_TABLE(x86cpu, intel_cstates_match);

arch/x86/events/msr.c

@@ -89,7 +89,14 @@ static bool test_intel(int idx, void *data)
 	case INTEL_FAM6_SKYLAKE_X:
 	case INTEL_FAM6_KABYLAKE_L:
 	case INTEL_FAM6_KABYLAKE:
+	case INTEL_FAM6_COMETLAKE_L:
+	case INTEL_FAM6_COMETLAKE:
 	case INTEL_FAM6_ICELAKE_L:
+	case INTEL_FAM6_ICELAKE:
+	case INTEL_FAM6_ICELAKE_X:
+	case INTEL_FAM6_ICELAKE_D:
+	case INTEL_FAM6_TIGERLAKE_L:
+	case INTEL_FAM6_TIGERLAKE:
 		if (idx == PERF_MSR_SMI || idx == PERF_MSR_PPERF)
 			return true;
 		break;

arch/x86/hyperv/hv_apic.c

@@ -260,11 +260,21 @@ void __init hv_apic_init(void)
 	}
 
 	if (ms_hyperv.hints & HV_X64_APIC_ACCESS_RECOMMENDED) {
-		pr_info("Hyper-V: Using MSR based APIC access\n");
+		pr_info("Hyper-V: Using enlightened APIC (%s mode)",
+			x2apic_enabled() ? "x2apic" : "xapic");
+		/*
+		 * With x2apic, architectural x2apic MSRs are equivalent to the
+		 * respective synthetic MSRs, so there's no need to override
+		 * the apic accessors.  The only exception is
+		 * hv_apic_eoi_write, because it benefits from lazy EOI when
+		 * available, but it works for both xapic and x2apic modes.
+		 */
 		apic_set_eoi_write(hv_apic_eoi_write);
-		apic->read      = hv_apic_read;
-		apic->write     = hv_apic_write;
-		apic->icr_write = hv_apic_icr_write;
-		apic->icr_read  = hv_apic_icr_read;
+		if (!x2apic_enabled()) {
+			apic->read      = hv_apic_read;
+			apic->write     = hv_apic_write;
+			apic->icr_write = hv_apic_icr_write;
+			apic->icr_read  = hv_apic_icr_read;
+		}
 	}
 }