Linux 5.2-rc5

Pull x86 fixes from Thomas Gleixner:
 "The accumulated fixes from this and last week:

   - Fix vmalloc TLB flush and map range calculations which lead to
     stale TLBs, spurious faults and other hard to diagnose issues.

   - Use fault_in_pages_writable() for prefaulting the user stack in the
     FPU code as it's less fragile than the current solution

   - Use the PF_KTHREAD flag when checking for a kernel thread instead
     of current->mm as the latter can give the wrong answer due to
     use_mm()

   - Compute the vmemmap size correctly for KASLR and 5-Level paging.
     Otherwise this can end up with a way too small vmemmap area.

   - Make KASAN and 5-level paging work again by making sure that all
     invalid bits are masked out when computing the P4D offset. This
     worked before but got broken recently when the LDT remap area was
     moved.

   - Prevent a NULL pointer dereference in the resource control code
     which can be triggered with certain mount options when the
     requested resource is not available.

   - Enforce ordering of microcode loading vs. perf initialization on
     secondary CPUs. Otherwise perf tries to access a non-existing MSR
     as the boot CPU marked it as available.

   - Don't stop the resource control group walk early otherwise the
     control bitmaps are not updated correctly and become inconsistent.

   - Unbreak kgdb by returning 0 on success from
     kgdb_arch_set_breakpoint() instead of an error code.

   - Add more Icelake CPU model defines so depending changes can be
     queued in other trees"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode, cpuhotplug: Add a microcode loader CPU hotplug callback
  x86/kasan: Fix boot with 5-level paging and KASAN
  x86/fpu: Don't use current->mm to check for a kthread
  x86/kgdb: Return 0 from kgdb_arch_set_breakpoint()
  x86/resctrl: Prevent NULL pointer dereference when local MBM is disabled
  x86/resctrl: Don't stop walking closids when a locksetup group is found
  x86/fpu: Update kernel's FPU state before using for the fsave header
  x86/mm/KASLR: Compute the size of the vmemmap section properly
  x86/fpu: Use fault_in_pages_writeable() for pre-faulting
  x86/CPU: Add more Icelake model numbers
  mm/vmalloc: Avoid rare case of flushing TLB with weird arguments
  mm/vmalloc: Fix calculation of direct map addr range

CREDITS

@@ -3364,6 +3364,14 @@ S: Braunschweiger Strasse 79
 S: 31134 Hildesheim
 S: Germany
 
+N: Martin Schwidefsky
+D: Martin was the most significant contributor to the initial s390
+D: port of the Linux Kernel and later the maintainer of the s390
+D: architecture backend for almost two decades.
+D: He passed away in 2019, and will be greatly missed.
+S: Germany
+W: https://lwn.net/Articles/789028/
+
 N: Marcel Selhorst
 E: tpmdd@selhorst.net
 D: TPM driver

Documentation/ABI/testing/sysfs-bus-mdio

@@ -1,29 +0,0 @@
-What:		/sys/bus/mdio_bus/devices/.../phy_id
-Date:		November 2012
-KernelVersion:	3.8
-Contact:	netdev@vger.kernel.org
-Description:
-		This attribute contains the 32-bit PHY Identifier as reported
-		by the device during bus enumeration, encoded in hexadecimal.
-		This ID is used to match the device with the appropriate
-		driver.
-
-What:		/sys/bus/mdio_bus/devices/.../phy_interface
-Date:		February 2014
-KernelVersion:	3.15
-Contact:	netdev@vger.kernel.org
-Description:
-		This attribute contains the PHY interface as configured by the
-		Ethernet driver during bus enumeration, encoded in string.
-		This interface mode is used to configure the Ethernet MAC with the
-		appropriate mode for its data lines to the PHY hardware.
-
-What:		/sys/bus/mdio_bus/devices/.../phy_has_fixups
-Date:		February 2014
-KernelVersion:	3.15
-Contact:	netdev@vger.kernel.org
-Description:
-		This attribute contains the boolean value whether a given PHY
-		device has had any "fixup" workaround running on it, encoded as
-		a boolean. This information is provided to help troubleshooting
-		PHY configurations.

Documentation/ABI/testing/sysfs-class-net-phydev

@@ -11,24 +11,31 @@ Date:		February 2014
 KernelVersion:	3.15
 Contact:	netdev@vger.kernel.org
 Description:
-		Boolean value indicating whether the PHY device has
-		any fixups registered against it (phy_register_fixup)
+		This attribute contains the boolean value whether a given PHY
+		device has had any "fixup" workaround running on it, encoded as
+		a boolean. This information is provided to help troubleshooting
+		PHY configurations.
 
 What:		/sys/class/mdio_bus/<bus>/<device>/phy_id
 Date:		November 2012
 KernelVersion:	3.8
 Contact:	netdev@vger.kernel.org
 Description:
-		32-bit hexadecimal value corresponding to the PHY device's OUI,
-		model and revision number.
+		This attribute contains the 32-bit PHY Identifier as reported
+		by the device during bus enumeration, encoded in hexadecimal.
+		This ID is used to match the device with the appropriate
+		driver.
 
 What:		/sys/class/mdio_bus/<bus>/<device>/phy_interface
 Date:		February 2014
 KernelVersion:	3.15
 Contact:	netdev@vger.kernel.org
 Description:
-		String value indicating the PHY interface, possible
-		values are:.
+		This attribute contains the PHY interface as configured by the
+		Ethernet driver during bus enumeration, encoded in string.
+		This interface mode is used to configure the Ethernet MAC with the
+		appropriate mode for its data lines to the PHY hardware.
+		Possible values are:
 		<empty> (not available), mii, gmii, sgmii, tbi, rev-mii,
 		rmii, rgmii, rgmii-id, rgmii-rxid, rgmii-txid, rtbi, smii
 		xgmii, moca, qsgmii, trgmii, 1000base-x, 2500base-x, rxaui,

Documentation/admin-guide/cgroup-v2.rst

@@ -177,6 +177,15 @@ cgroup v2 currently supports the following mount options.
 	ignored on non-init namespace mounts.  Please refer to the
 	Delegation section for details.
 
+  memory_localevents
+
+        Only populate memory.events with data for the current cgroup,
+        and not any subtrees. This is legacy behaviour, the default
+        behaviour without this option is to include subtree counts.
+        This option is system wide and can only be set on mount or
+        modified through remount from the init namespace. The mount
+        option is ignored on non-init namespace mounts.
+
 
 Organizing Processes and Threads
 --------------------------------

Documentation/admin-guide/mm/index.rst

@@ -31,6 +31,7 @@ the Linux memory management.
    ksm
    memory-hotplug
    numa_memory_policy
+   numaperf
    pagemap
    soft-dirty
    transhuge

Documentation/admin-guide/mm/numaperf.rst

@@ -15,7 +15,7 @@ characteristics.  Some memory may share the same node as a CPU, and others
 are provided as memory only nodes. While memory only nodes do not provide
 CPUs, they may still be local to one or more compute nodes relative to
 other nodes. The following diagram shows one such example of two compute
-nodes with local memory and a memory only node for each of compute node:
+nodes with local memory and a memory only node for each of compute node::
 
  +------------------+     +------------------+
  | Compute Node 0   +-----+ Compute Node 1   |

Documentation/arm64/sve.txt

@@ -56,6 +56,18 @@ model features for SVE is included in Appendix A.
   is to connect to a target process first and then attempt a
   ptrace(PTRACE_GETREGSET, pid, NT_ARM_SVE, &iov).
 
+* Whenever SVE scalable register values (Zn, Pn, FFR) are exchanged in memory
+  between userspace and the kernel, the register value is encoded in memory in
+  an endianness-invariant layout, with bits [(8 * i + 7) : (8 * i)] encoded at
+  byte offset i from the start of the memory representation.  This affects for
+  example the signal frame (struct sve_context) and ptrace interface
+  (struct user_sve_header) and associated data.
+
+  Beware that on big-endian systems this results in a different byte order than
+  for the FPSIMD V-registers, which are stored as single host-endian 128-bit
+  values, with bits [(127 - 8 * i) : (120 - 8 * i)] of the register encoded at
+  byte offset i.  (struct fpsimd_context, struct user_fpsimd_state).
+
 
 2.  Vector length terminology
 -----------------------------
@@ -124,6 +136,10 @@ the SVE instruction set architecture.
   size and layout.  Macros SVE_SIG_* are defined [1] to facilitate access to
   the members.
 
+* Each scalable register (Zn, Pn, FFR) is stored in an endianness-invariant
+  layout, with bits [(8 * i + 7) : (8 * i)] stored at byte offset i from the
+  start of the register's representation in memory.
+
 * If the SVE context is too big to fit in sigcontext.__reserved[], then extra
   space is allocated on the stack, an extra_context record is written in
   __reserved[] referencing this space.  sve_context is then written in the

Documentation/block/switching-sched.txt

@@ -13,11 +13,9 @@ you can do so by typing:
 
 # mount none /sys -t sysfs
 
-As of the Linux 2.6.10 kernel, it is now possible to change the
-IO scheduler for a given block device on the fly (thus making it possible,
-for instance, to set the CFQ scheduler for the system default, but
-set a specific device to use the deadline or noop schedulers - which
-can improve that device's throughput).
+It is possible to change the IO scheduler for a given block device on
+the fly to select one of mq-deadline, none, bfq, or kyber schedulers -
+which can improve that device's throughput.
 
 To set a specific scheduler, simply do this:
 
@@ -30,8 +28,8 @@ The list of defined schedulers can be found by simply doing
 a "cat /sys/block/DEV/queue/scheduler" - the list of valid names
 will be displayed, with the currently selected scheduler in brackets:
 
-# cat /sys/block/hda/queue/scheduler
-noop deadline [cfq]
-# echo deadline > /sys/block/hda/queue/scheduler
-# cat /sys/block/hda/queue/scheduler
-noop [deadline] cfq
+# cat /sys/block/sda/queue/scheduler
+[mq-deadline] kyber bfq none
+# echo none >/sys/block/sda/queue/scheduler
+# cat /sys/block/sda/queue/scheduler
+[none] mq-deadline kyber bfq

Documentation/cgroup-v1/blkio-controller.txt

@@ -8,61 +8,13 @@ both at leaf nodes as well as at intermediate nodes in a storage hierarchy.
 Plan is to use the same cgroup based management interface for blkio controller
 and based on user options switch IO policies in the background.
 
-Currently two IO control policies are implemented. First one is proportional
-weight time based division of disk policy. It is implemented in CFQ. Hence
-this policy takes effect only on leaf nodes when CFQ is being used. The second
-one is throttling policy which can be used to specify upper IO rate limits
-on devices. This policy is implemented in generic block layer and can be
-used on leaf nodes as well as higher level logical devices like device mapper.
+One IO control policy is throttling policy which can be used to
+specify upper IO rate limits on devices. This policy is implemented in
+generic block layer and can be used on leaf nodes as well as higher
+level logical devices like device mapper.
 
 HOWTO
 =====
-Proportional Weight division of bandwidth
------------------------------------------
-You can do a very simple testing of running two dd threads in two different
-cgroups. Here is what you can do.
-
-- Enable Block IO controller
-	CONFIG_BLK_CGROUP=y
-
-- Enable group scheduling in CFQ
-	CONFIG_CFQ_GROUP_IOSCHED=y
-
-- Compile and boot into kernel and mount IO controller (blkio); see
-  cgroups.txt, Why are cgroups needed?.
-
-	mount -t tmpfs cgroup_root /sys/fs/cgroup
-	mkdir /sys/fs/cgroup/blkio
-	mount -t cgroup -o blkio none /sys/fs/cgroup/blkio
-
-- Create two cgroups
-	mkdir -p /sys/fs/cgroup/blkio/test1/ /sys/fs/cgroup/blkio/test2
-
-- Set weights of group test1 and test2
-	echo 1000 > /sys/fs/cgroup/blkio/test1/blkio.weight
-	echo 500 > /sys/fs/cgroup/blkio/test2/blkio.weight
-
-- Create two same size files (say 512MB each) on same disk (file1, file2) and
-  launch two dd threads in different cgroup to read those files.
-
-	sync
-	echo 3 > /proc/sys/vm/drop_caches
-
-	dd if=/mnt/sdb/zerofile1 of=/dev/null &
-	echo $! > /sys/fs/cgroup/blkio/test1/tasks
-	cat /sys/fs/cgroup/blkio/test1/tasks
-
-	dd if=/mnt/sdb/zerofile2 of=/dev/null &
-	echo $! > /sys/fs/cgroup/blkio/test2/tasks
-	cat /sys/fs/cgroup/blkio/test2/tasks
-
-- At macro level, first dd should finish first. To get more precise data, keep
-  on looking at (with the help of script), at blkio.disk_time and
-  blkio.disk_sectors files of both test1 and test2 groups. This will tell how
-  much disk time (in milliseconds), each group got and how many sectors each
-  group dispatched to the disk. We provide fairness in terms of disk time, so
-  ideally io.disk_time of cgroups should be in proportion to the weight.
-
 Throttling/Upper Limit policy
 -----------------------------
 - Enable Block IO controller
@@ -94,7 +46,7 @@ Throttling/Upper Limit policy
 Hierarchical Cgroups
 ====================
 
-Both CFQ and throttling implement hierarchy support; however,
+Throttling implements hierarchy support; however,
 throttling's hierarchy support is enabled iff "sane_behavior" is
 enabled from cgroup side, which currently is a development option and
 not publicly available.
@@ -107,9 +59,8 @@ If somebody created a hierarchy like as follows.
 			|
 		     test3
 
-CFQ by default and throttling with "sane_behavior" will handle the
-hierarchy correctly.  For details on CFQ hierarchy support, refer to
-Documentation/block/cfq-iosched.txt.  For throttling, all limits apply
+Throttling with "sane_behavior" will handle the
+hierarchy correctly. For throttling, all limits apply
 to the whole subtree while all statistics are local to the IOs
 directly generated by tasks in that cgroup.
 
@@ -130,10 +81,6 @@ CONFIG_DEBUG_BLK_CGROUP
 	- Debug help. Right now some additional stats file show up in cgroup
 	  if this option is enabled.
 
-CONFIG_CFQ_GROUP_IOSCHED
-	- Enables group scheduling in CFQ. Currently only 1 level of group
-	  creation is allowed.
-
 CONFIG_BLK_DEV_THROTTLING
 	- Enable block device throttling support in block layer.
 
@@ -344,32 +291,3 @@ Common files among various policies
 - blkio.reset_stats
 	- Writing an int to this file will result in resetting all the stats
 	  for that cgroup.
-
-CFQ sysfs tunable
-=================
-/sys/block/<disk>/queue/iosched/slice_idle
-------------------------------------------
-On a faster hardware CFQ can be slow, especially with sequential workload.
-This happens because CFQ idles on a single queue and single queue might not
-drive deeper request queue depths to keep the storage busy. In such scenarios
-one can try setting slice_idle=0 and that would switch CFQ to IOPS
-(IO operations per second) mode on NCQ supporting hardware.
-
-That means CFQ will not idle between cfq queues of a cfq group and hence be
-able to driver higher queue depth and achieve better throughput. That also
-means that cfq provides fairness among groups in terms of IOPS and not in
-terms of disk time.
-
-/sys/block/<disk>/queue/iosched/group_idle
-------------------------------------------
-If one disables idling on individual cfq queues and cfq service trees by
-setting slice_idle=0, group_idle kicks in. That means CFQ will still idle
-on the group in an attempt to provide fairness among groups.
-
-By default group_idle is same as slice_idle and does not do anything if
-slice_idle is enabled.
-
-One can experience an overall throughput drop if you have created multiple
-groups and put applications in that group which are not driving enough
-IO to keep disk busy. In that case set group_idle=0, and CFQ will not idle
-on individual groups and throughput should improve.

Documentation/cgroup-v1/hugetlb.txt

@@ -32,14 +32,18 @@ Brief summary of control files
  hugetlb.<hugepagesize>.usage_in_bytes     # show current usage for "hugepagesize" hugetlb
  hugetlb.<hugepagesize>.failcnt		   # show the number of allocation failure due to HugeTLB limit
 
-For a system supporting two hugepage size (16M and 16G) the control
+For a system supporting three hugepage sizes (64k, 32M and 1G), the control
 files include:
 
-hugetlb.16GB.limit_in_bytes
-hugetlb.16GB.max_usage_in_bytes
-hugetlb.16GB.usage_in_bytes
-hugetlb.16GB.failcnt
-hugetlb.16MB.limit_in_bytes
-hugetlb.16MB.max_usage_in_bytes
-hugetlb.16MB.usage_in_bytes
-hugetlb.16MB.failcnt
+hugetlb.1GB.limit_in_bytes
+hugetlb.1GB.max_usage_in_bytes
+hugetlb.1GB.usage_in_bytes
+hugetlb.1GB.failcnt
+hugetlb.64KB.limit_in_bytes
+hugetlb.64KB.max_usage_in_bytes
+hugetlb.64KB.usage_in_bytes
+hugetlb.64KB.failcnt
+hugetlb.32MB.limit_in_bytes
+hugetlb.32MB.max_usage_in_bytes
+hugetlb.32MB.usage_in_bytes
+hugetlb.32MB.failcnt

Documentation/conf.py

@@ -37,7 +37,7 @@ needs_sphinx = '1.3'
 extensions = ['kerneldoc', 'rstFlatTable', 'kernel_include', 'cdomain', 'kfigure', 'sphinx.ext.ifconfig']
 
 # The name of the math extension changed on Sphinx 1.4
-if major == 1 and minor > 3:
+if (major == 1 and minor > 3) or (major > 1):
     extensions.append("sphinx.ext.imgmath")
 else:
     extensions.append("sphinx.ext.pngmath")

Documentation/filesystems/overlayfs.txt

@@ -336,8 +336,20 @@ the copied layers will fail the verification of the lower root file handle.
 Non-standard behavior
 ---------------------
 
-Overlayfs can now act as a POSIX compliant filesystem with the following
-features turned on:
+Current version of overlayfs can act as a mostly POSIX compliant
+filesystem.
+
+This is the list of cases that overlayfs doesn't currently handle:
+
+a) POSIX mandates updating st_atime for reads.  This is currently not
+done in the case when the file resides on a lower layer.
+
+b) If a file residing on a lower layer is opened for read-only and then
+memory mapped with MAP_SHARED, then subsequent changes to the file are not
+reflected in the memory mapping.
+
+The following options allow overlayfs to act more like a standards
+compliant filesystem:
 
 1) "redirect_dir"
 

Documentation/firmware-guide/acpi/enumeration.rst

@@ -423,7 +423,7 @@ will be enumerated to depends on the device ID returned by _HID.
 
 For example, the following ACPI sample might be used to enumerate an lm75-type
 I2C temperature sensor and match it to the driver using the Device Tree
-namespace link:
+namespace link::
 
 	Device (TMP0)
 	{

Documentation/networking/device_drivers/index.rst

@@ -0,0 +1,30 @@
+.. SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+Vendor Device Drivers
+=====================
+
+Contents:
+
+.. toctree::
+   :maxdepth: 2
+
+   freescale/dpaa2/index
+   intel/e100
+   intel/e1000
+   intel/e1000e
+   intel/fm10k
+   intel/igb
+   intel/igbvf
+   intel/ixgb
+   intel/ixgbe
+   intel/ixgbevf
+   intel/i40e
+   intel/iavf
+   intel/ice
+
+.. only::  subproject
+
+   Indices
+   =======
+
+   * :ref:`genindex`

Documentation/networking/index.rst

@@ -11,19 +11,7 @@ Contents:
    batman-adv
    can
    can_ucan_protocol
-   device_drivers/freescale/dpaa2/index
-   device_drivers/intel/e100
-   device_drivers/intel/e1000
-   device_drivers/intel/e1000e
-   device_drivers/intel/fm10k
-   device_drivers/intel/igb
-   device_drivers/intel/igbvf
-   device_drivers/intel/ixgb
-   device_drivers/intel/ixgbe
-   device_drivers/intel/ixgbevf
-   device_drivers/intel/i40e
-   device_drivers/intel/iavf
-   device_drivers/intel/ice
+   device_drivers/index
    dsa/index
    devlink-info-versions
    ieee802154
@@ -40,6 +28,8 @@ Contents:
    checksum-offloads
    segmentation-offloads
    scaling
+   tls
+   tls-offload
 
 .. only::  subproject
 

Documentation/networking/tls-offload.rst

@@ -0,0 +1,482 @@
+.. SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+==================
+Kernel TLS offload
+==================
+
+Kernel TLS operation
+====================
+
+Linux kernel provides TLS connection offload infrastructure. Once a TCP
+connection is in ``ESTABLISHED`` state user space can enable the TLS Upper
+Layer Protocol (ULP) and install the cryptographic connection state.
+For details regarding the user-facing interface refer to the TLS
+documentation in :ref:`Documentation/networking/tls.rst <kernel_tls>`.
+
+``ktls`` can operate in three modes:
+
+ * Software crypto mode (``TLS_SW``) - CPU handles the cryptography.
+   In most basic cases only crypto operations synchronous with the CPU
+   can be used, but depending on calling context CPU may utilize
+   asynchronous crypto accelerators. The use of accelerators introduces extra
+   latency on socket reads (decryption only starts when a read syscall
+   is made) and additional I/O load on the system.
+ * Packet-based NIC offload mode (``TLS_HW``) - the NIC handles crypto
+   on a packet by packet basis, provided the packets arrive in order.
+   This mode integrates best with the kernel stack and is described in detail
+   in the remaining part of this document
+   (``ethtool`` flags ``tls-hw-tx-offload`` and ``tls-hw-rx-offload``).
+ * Full TCP NIC offload mode (``TLS_HW_RECORD``) - mode of operation where
+   NIC driver and firmware replace the kernel networking stack
+   with its own TCP handling, it is not usable in production environments
+   making use of the Linux networking stack for example any firewalling
+   abilities or QoS and packet scheduling (``ethtool`` flag ``tls-hw-record``).
+
+The operation mode is selected automatically based on device configuration,
+offload opt-in or opt-out on per-connection basis is not currently supported.
+
+TX
+--
+
+At a high level user write requests are turned into a scatter list, the TLS ULP
+intercepts them, inserts record framing, performs encryption (in ``TLS_SW``
+mode) and then hands the modified scatter list to the TCP layer. From this
+point on the TCP stack proceeds as normal.
+
+In ``TLS_HW`` mode the encryption is not performed in the TLS ULP.
+Instead packets reach a device driver, the driver will mark the packets
+for crypto offload based on the socket the packet is attached to,
+and send them to the device for encryption and transmission.
+
+RX
+--
+
+On the receive side if the device handled decryption and authentication
+successfully, the driver will set the decrypted bit in the associated
+:c:type:`struct sk_buff <sk_buff>`. The packets reach the TCP stack and
+are handled normally. ``ktls`` is informed when data is queued to the socket
+and the ``strparser`` mechanism is used to delineate the records. Upon read
+request, records are retrieved from the socket and passed to decryption routine.
+If device decrypted all the segments of the record the decryption is skipped,
+otherwise software path handles decryption.
+
+.. kernel-figure::  tls-offload-layers.svg
+   :alt:	TLS offload layers
+   :align:	center
+   :figwidth:	28em
+
+   Layers of Kernel TLS stack
+
+Device configuration
+====================
+
+During driver initialization device sets the ``NETIF_F_HW_TLS_RX`` and
+``NETIF_F_HW_TLS_TX`` features and installs its
+:c:type:`struct tlsdev_ops <tlsdev_ops>`
+pointer in the :c:member:`tlsdev_ops` member of the
+:c:type:`struct net_device <net_device>`.
+
+When TLS cryptographic connection state is installed on a ``ktls`` socket
+(note that it is done twice, once for RX and once for TX direction,
+and the two are completely independent), the kernel checks if the underlying
+network device is offload-capable and attempts the offload. In case offload
+fails the connection is handled entirely in software using the same mechanism
+as if the offload was never tried.
+
+Offload request is performed via the :c:member:`tls_dev_add` callback of
+:c:type:`struct tlsdev_ops <tlsdev_ops>`:
+
+.. code-block:: c
+
+	int (*tls_dev_add)(struct net_device *netdev, struct sock *sk,
+			   enum tls_offload_ctx_dir direction,
+			   struct tls_crypto_info *crypto_info,
+			   u32 start_offload_tcp_sn);
+
+``direction`` indicates whether the cryptographic information is for
+the received or transmitted packets. Driver uses the ``sk`` parameter
+to retrieve the connection 5-tuple and socket family (IPv4 vs IPv6).
+Cryptographic information in ``crypto_info`` includes the key, iv, salt
+as well as TLS record sequence number. ``start_offload_tcp_sn`` indicates
+which TCP sequence number corresponds to the beginning of the record with
+sequence number from ``crypto_info``. The driver can add its state
+at the end of kernel structures (see :c:member:`driver_state` members
+in ``include/net/tls.h``) to avoid additional allocations and pointer
+dereferences.
+
+TX
+--
+
+After TX state is installed, the stack guarantees that the first segment
+of the stream will start exactly at the ``start_offload_tcp_sn`` sequence
+number, simplifying TCP sequence number matching.
+
+TX offload being fully initialized does not imply that all segments passing
+through the driver and which belong to the offloaded socket will be after
+the expected sequence number and will have kernel record information.
+In particular, already encrypted data may have been queued to the socket
+before installing the connection state in the kernel.
+
+RX
+--
+
+In RX direction local networking stack has little control over the segmentation,
+so the initial records' TCP sequence number may be anywhere inside the segment.
+
+Normal operation
+================
+
+At the minimum the device maintains the following state for each connection, in
+each direction:
+
+ * crypto secrets (key, iv, salt)
+ * crypto processing state (partial blocks, partial authentication tag, etc.)
+ * record metadata (sequence number, processing offset and length)
+ * expected TCP sequence number
+
+There are no guarantees on record length or record segmentation. In particular
+segments may start at any point of a record and contain any number of records.
+Assuming segments are received in order, the device should be able to perform
+crypto operations and authentication regardless of segmentation. For this
+to be possible device has to keep small amount of segment-to-segment state.
+This includes at least:
+
+ * partial headers (if a segment carried only a part of the TLS header)
+ * partial data block
+ * partial authentication tag (all data had been seen but part of the
+   authentication tag has to be written or read from the subsequent segment)
+
+Record reassembly is not necessary for TLS offload. If the packets arrive
+in order the device should be able to handle them separately and make
+forward progress.
+
+TX
+--
+
+The kernel stack performs record framing reserving space for the authentication
+tag and populating all other TLS header and tailer fields.
+
+Both the device and the driver maintain expected TCP sequence numbers
+due to the possibility of retransmissions and the lack of software fallback
+once the packet reaches the device.
+For segments passed in order, the driver marks the packets with
+a connection identifier (note that a 5-tuple lookup is insufficient to identify
+packets requiring HW offload, see the :ref:`5tuple_problems` section)
+and hands them to the device. The device identifies the packet as requiring
+TLS handling and confirms the sequence number matches its expectation.
+The device performs encryption and authentication of the record data.
+It replaces the authentication tag and TCP checksum with correct values.
+
+RX
+--
+
+Before a packet is DMAed to the host (but after NIC's embedded switching
+and packet transformation functions) the device validates the Layer 4
+checksum and performs a 5-tuple lookup to find any TLS connection the packet
+may belong to (technically a 4-tuple
+lookup is sufficient - IP addresses and TCP port numbers, as the protocol
+is always TCP). If connection is matched device confirms if the TCP sequence
+number is the expected one and proceeds to TLS handling (record delineation,
+decryption, authentication for each record in the packet). The device leaves
+the record framing unmodified, the stack takes care of record decapsulation.
+Device indicates successful handling of TLS offload in the per-packet context
+(descriptor) passed to the host.
+
+Upon reception of a TLS offloaded packet, the driver sets
+the :c:member:`decrypted` mark in :c:type:`struct sk_buff <sk_buff>`
+corresponding to the segment. Networking stack makes sure decrypted
+and non-decrypted segments do not get coalesced (e.g. by GRO or socket layer)
+and takes care of partial decryption.
+
+Resync handling
+===============
+
+In presence of packet drops or network packet reordering, the device may lose
+synchronization with the TLS stream, and require a resync with the kernel's
+TCP stack.
+
+Note that resync is only attempted for connections which were successfully
+added to the device table and are in TLS_HW mode. For example,
+if the table was full when cryptographic state was installed in the kernel,
+such connection will never get offloaded. Therefore the resync request
+does not carry any cryptographic connection state.
+
+TX
+--
+
+Segments transmitted from an offloaded socket can get out of sync
+in similar ways to the receive side-retransmissions - local drops
+are possible, though network reorders are not.
+
+Whenever an out of order segment is transmitted the driver provides
+the device with enough information to perform cryptographic operations.
+This means most likely that the part of the record preceding the current
+segment has to be passed to the device as part of the packet context,
+together with its TCP sequence number and TLS record number. The device
+can then initialize its crypto state, process and discard the preceding
+data (to be able to insert the authentication tag) and move onto handling
+the actual packet.
+
+In this mode depending on the implementation the driver can either ask
+for a continuation with the crypto state and the new sequence number
+(next expected segment is the one after the out of order one), or continue
+with the previous stream state - assuming that the out of order segment
+was just a retransmission. The former is simpler, and does not require
+retransmission detection therefore it is the recommended method until
+such time it is proven inefficient.
+
+RX
+--
+
+A small amount of RX reorder events may not require a full resynchronization.
+In particular the device should not lose synchronization
+when record boundary can be recovered:
+
+.. kernel-figure::  tls-offload-reorder-good.svg
+   :alt:	reorder of non-header segment
+   :align:	center
+
+   Reorder of non-header segment
+
+Green segments are successfully decrypted, blue ones are passed
+as received on wire, red stripes mark start of new records.
+
+In above case segment 1 is received and decrypted successfully.
+Segment 2 was dropped so 3 arrives out of order. The device knows
+the next record starts inside 3, based on record length in segment 1.
+Segment 3 is passed untouched, because due to lack of data from segment 2
+the remainder of the previous record inside segment 3 cannot be handled.
+The device can, however, collect the authentication algorithm's state
+and partial block from the new record in segment 3 and when 4 and 5
+arrive continue decryption. Finally when 2 arrives it's completely outside
+of expected window of the device so it's passed as is without special
+handling. ``ktls`` software fallback handles the decryption of record
+spanning segments 1, 2 and 3. The device did not get out of sync,
+even though two segments did not get decrypted.
+
+Kernel synchronization may be necessary if the lost segment contained
+a record header and arrived after the next record header has already passed:
+
+.. kernel-figure::  tls-offload-reorder-bad.svg
+   :alt:	reorder of header segment
+   :align:	center
+
+   Reorder of segment with a TLS header
+
+In this example segment 2 gets dropped, and it contains a record header.
+Device can only detect that segment 4 also contains a TLS header
+if it knows the length of the previous record from segment 2. In this case
+the device will lose synchronization with the stream.
+
+When the device gets out of sync and the stream reaches TCP sequence
+numbers more than a max size record past the expected TCP sequence number,
+the device starts scanning for a known header pattern. For example
+for TLS 1.2 and TLS 1.3 subsequent bytes of value ``0x03 0x03`` occur
+in the SSL/TLS version field of the header. Once pattern is matched
+the device continues attempting parsing headers at expected locations
+(based on the length fields at guessed locations).
+Whenever the expected location does not contain a valid header the scan
+is restarted.
+
+When the header is matched the device sends a confirmation request
+to the kernel, asking if the guessed location is correct (if a TLS record
+really starts there), and which record sequence number the given header had.
+The kernel confirms the guessed location was correct and tells the device
+the record sequence number. Meanwhile, the device had been parsing
+and counting all records since the just-confirmed one, it adds the number
+of records it had seen to the record number provided by the kernel.
+At this point the device is in sync and can resume decryption at next
+segment boundary.
+
+In a pathological case the device may latch onto a sequence of matching
+headers and never hear back from the kernel (there is no negative
+confirmation from the kernel). The implementation may choose to periodically
+restart scan. Given how unlikely falsely-matching stream is, however,
+periodic restart is not deemed necessary.
+
+Special care has to be taken if the confirmation request is passed
+asynchronously to the packet stream and record may get processed
+by the kernel before the confirmation request.
+
+Error handling
+==============
+
+TX
+--
+
+Packets may be redirected or rerouted by the stack to a different
+device than the selected TLS offload device. The stack will handle
+such condition using the :c:func:`sk_validate_xmit_skb` helper
+(TLS offload code installs :c:func:`tls_validate_xmit_skb` at this hook).
+Offload maintains information about all records until the data is
+fully acknowledged, so if skbs reach the wrong device they can be handled
+by software fallback.
+
+Any device TLS offload handling error on the transmission side must result
+in the packet being dropped. For example if a packet got out of order
+due to a bug in the stack or the device, reached the device and can't
+be encrypted such packet must be dropped.
+
+RX
+--
+
+If the device encounters any problems with TLS offload on the receive
+side it should pass the packet to the host's networking stack as it was
+received on the wire.
+
+For example authentication failure for any record in the segment should
+result in passing the unmodified packet to the software fallback. This means
+packets should not be modified "in place". Splitting segments to handle partial
+decryption is not advised. In other words either all records in the packet
+had been handled successfully and authenticated or the packet has to be passed
+to the host's stack as it was on the wire (recovering original packet in the
+driver if device provides precise error is sufficient).
+
+The Linux networking stack does not provide a way of reporting per-packet
+decryption and authentication errors, packets with errors must simply not
+have the :c:member:`decrypted` mark set.
+
+A packet should also not be handled by the TLS offload if it contains
+incorrect checksums.
+
+Performance metrics
+===================
+
+TLS offload can be characterized by the following basic metrics:
+
+ * max connection count
+ * connection installation rate
+ * connection installation latency
+ * total cryptographic performance
+
+Note that each TCP connection requires a TLS session in both directions,
+the performance may be reported treating each direction separately.
+
+Max connection count
+--------------------
+
+The number of connections device can support can be exposed via
+``devlink resource`` API.
+
+Total cryptographic performance
+-------------------------------
+
+Offload performance may depend on segment and record size.
+
+Overload of the cryptographic subsystem of the device should not have
+significant performance impact on non-offloaded streams.
+
+Statistics
+==========
+
+Following minimum set of TLS-related statistics should be reported
+by the driver:
+
+ * ``rx_tls_decrypted`` - number of successfully decrypted TLS segments
+ * ``tx_tls_encrypted`` - number of in-order TLS segments passed to device
+   for encryption
+ * ``tx_tls_ooo`` - number of TX packets which were part of a TLS stream
+   but did not arrive in the expected order
+ * ``tx_tls_drop_no_sync_data`` - number of TX packets dropped because
+   they arrived out of order and associated record could not be found
+   (see also :ref:`pre_tls_data`)
+
+Notable corner cases, exceptions and additional requirements
+============================================================
+
+.. _5tuple_problems:
+
+5-tuple matching limitations
+----------------------------
+
+The device can only recognize received packets based on the 5-tuple
+of the socket. Current ``ktls`` implementation will not offload sockets
+routed through software interfaces such as those used for tunneling
+or virtual networking. However, many packet transformations performed
+by the networking stack (most notably any BPF logic) do not require
+any intermediate software device, therefore a 5-tuple match may
+consistently miss at the device level. In such cases the device
+should still be able to perform TX offload (encryption) and should
+fallback cleanly to software decryption (RX).
+
+Out of order
+------------
+
+Introducing extra processing in NICs should not cause packets to be
+transmitted or received out of order, for example pure ACK packets
+should not be reordered with respect to data segments.
+
+Ingress reorder
+---------------
+
+A device is permitted to perform packet reordering for consecutive
+TCP segments (i.e. placing packets in the correct order) but any form
+of additional buffering is disallowed.
+
+Coexistence with standard networking offload features
+-----------------------------------------------------
+
+Offloaded ``ktls`` sockets should support standard TCP stack features
+transparently. Enabling device TLS offload should not cause any difference
+in packets as seen on the wire.
+
+Transport layer transparency
+----------------------------
+
+The device should not modify any packet headers for the purpose
+of the simplifying TLS offload.
+
+The device should not depend on any packet headers beyond what is strictly
+necessary for TLS offload.
+
+Segment drops
+-------------
+
+Dropping packets is acceptable only in the event of catastrophic
+system errors and should never be used as an error handling mechanism
+in cases arising from normal operation. In other words, reliance
+on TCP retransmissions to handle corner cases is not acceptable.
+
+TLS device features
+-------------------
+
+Drivers should ignore the changes to TLS the device feature flags.
+These flags will be acted upon accordingly by the core ``ktls`` code.
+TLS device feature flags only control adding of new TLS connection
+offloads, old connections will remain active after flags are cleared.
+
+Known bugs
+==========
+
+skb_orphan() leaks clear text
+-----------------------------
+
+Currently drivers depend on the :c:member:`sk` member of
+:c:type:`struct sk_buff <sk_buff>` to identify segments requiring
+encryption. Any operation which removes or does not preserve the socket
+association such as :c:func:`skb_orphan` or :c:func:`skb_clone`
+will cause the driver to miss the packets and lead to clear text leaks.
+
+Redirects leak clear text
+-------------------------
+
+In the RX direction, if segment has already been decrypted by the device
+and it gets redirected or mirrored - clear text will be transmitted out.
+
+.. _pre_tls_data:
+
+Transmission of pre-TLS data
+----------------------------
+
+User can enqueue some already encrypted and framed records before enabling
+``ktls`` on the socket. Those records have to get sent as they are. This is
+perfectly easy to handle in the software case - such data will be waiting
+in the TCP layer, TLS ULP won't see it. In the offloaded case when pre-queued
+segment reaches transmission point it appears to be out of order (before the
+expected TCP sequence number) and the stack does not have a record information
+associated.
+
+All segments without record information cannot, however, be assumed to be
+pre-queued data, because a race condition exists between TCP stack queuing
+a retransmission, the driver seeing the retransmission and TCP ACK arriving
+for the retransmitted data.

Documentation/networking/tls.rst

@@ -1,3 +1,9 @@
+.. _kernel_tls:
+
+==========
+Kernel TLS
+==========
+
 Overview
 ========
 
@@ -12,6 +18,8 @@ Creating a TLS connection
 
 First create a new TCP socket and set the TLS ULP.
 
+.. code-block:: c
+
   sock = socket(AF_INET, SOCK_STREAM, 0);
   setsockopt(sock, SOL_TCP, TCP_ULP, "tls", sizeof("tls"));
 
@@ -21,6 +29,8 @@ handshake is complete, we have all the parameters required to move the
 data-path to the kernel. There is a separate socket option for moving
 the transmit and the receive into the kernel.
 
+.. code-block:: c
+
   /* From linux/tls.h */
   struct tls_crypto_info {
           unsigned short version;
@@ -58,6 +68,8 @@ After setting the TLS_TX socket option all application data sent over this
 socket is encrypted using TLS and the parameters provided in the socket option.
 For example, we can send an encrypted hello world record as follows:
 
+.. code-block:: c
+
   const char *msg = "hello world\n";
   send(sock, msg, strlen(msg));
 
@@ -67,6 +79,8 @@ to the encrypted kernel send buffer if possible.
 The sendfile system call will send the file's data over TLS records of maximum
 length (2^14).
 
+.. code-block:: c
+
   file = open(filename, O_RDONLY);
   fstat(file, &stat);
   sendfile(sock, file, &offset, stat.st_size);
@@ -89,6 +103,8 @@ After setting the TLS_RX socket option, all recv family socket calls
 are decrypted using TLS parameters provided.  A full TLS record must
 be received before decryption can happen.
 
+.. code-block:: c
+
   char buffer[16384];
   recv(sock, buffer, 16384);
 
@@ -97,12 +113,12 @@ large enough, and no additional allocations occur.  If the userspace
 buffer is too small, data is decrypted in the kernel and copied to
 userspace.
 
-EINVAL is returned if the TLS version in the received message does not
+``EINVAL`` is returned if the TLS version in the received message does not
 match the version passed in setsockopt.
 
-EMSGSIZE is returned if the received message is too big.
+``EMSGSIZE`` is returned if the received message is too big.
 
-EBADMSG is returned if decryption failed for any other reason.
+``EBADMSG`` is returned if decryption failed for any other reason.
 
 Send TLS control messages
 -------------------------
@@ -113,9 +129,11 @@ These messages can be sent over the socket by providing the TLS record type
 via a CMSG. For example the following function sends @data of @length bytes
 using a record of type @record_type.
 
-/* send TLS control message using record_type */
+.. code-block:: c
+
+  /* send TLS control message using record_type */
   static int klts_send_ctrl_message(int sock, unsigned char record_type,
-                                  void *data, size_t length)
+                                    void *data, size_t length)
   {
         struct msghdr msg = {0};
         int cmsg_len = sizeof(record_type);
@@ -151,6 +169,8 @@ type passed via cmsg.  If no cmsg buffer is provided, an error is
 returned if a control message is received.  Data messages may be
 received without a cmsg buffer set.
 
+.. code-block:: c
+
   char buffer[16384];
   char cmsg[CMSG_SPACE(sizeof(unsigned char))];
   struct msghdr msg = {0};
@@ -186,12 +206,10 @@ Integrating in to userspace TLS library
 At a high level, the kernel TLS ULP is a replacement for the record
 layer of a userspace TLS library.
 
-A patchset to OpenSSL to use ktls as the record layer is here:
+A patchset to OpenSSL to use ktls as the record layer is
+`here <https://github.com/Mellanox/openssl/commits/tls_rx2>`_.
 
-https://github.com/Mellanox/openssl/commits/tls_rx2
-
-An example of calling send directly after a handshake using
-gnutls.  Since it doesn't implement a full record layer, control
-messages are not supported:
-
-https://github.com/ktls/af_ktls-tool/commits/RX
+`An example <https://github.com/ktls/af_ktls-tool/commits/RX>`_
+of calling send directly after a handshake using gnutls.
+Since it doesn't implement a full record layer, control
+messages are not supported.

Documentation/sphinx/kerneldoc.py

@@ -37,7 +37,19 @@ import glob
 from docutils import nodes, statemachine
 from docutils.statemachine import ViewList
 from docutils.parsers.rst import directives, Directive
-from sphinx.ext.autodoc import AutodocReporter
+
+#
+# AutodocReporter is only good up to Sphinx 1.7
+#
+import sphinx
+
+Use_SSI = sphinx.__version__[:3] >= '1.7'
+if Use_SSI:
+    from sphinx.util.docutils import switch_source_input
+else:
+    from sphinx.ext.autodoc import AutodocReporter
+
+import kernellog
 
 __version__  = '1.0'
 
@@ -90,7 +102,8 @@ class KernelDocDirective(Directive):
         cmd += [filename]
 
         try:
-            env.app.verbose('calling kernel-doc \'%s\'' % (" ".join(cmd)))
+            kernellog.verbose(env.app,
+                              'calling kernel-doc \'%s\'' % (" ".join(cmd)))
 
             p = subprocess.Popen(cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
             out, err = p.communicate()
@@ -100,7 +113,8 @@ class KernelDocDirective(Directive):
             if p.returncode != 0:
                 sys.stderr.write(err)
 
-                env.app.warn('kernel-doc \'%s\' failed with return code %d' % (" ".join(cmd), p.returncode))
+                kernellog.warn(env.app,
+                               'kernel-doc \'%s\' failed with return code %d' % (" ".join(cmd), p.returncode))
                 return [nodes.error(None, nodes.paragraph(text = "kernel-doc missing"))]
             elif env.config.kerneldoc_verbosity > 0:
                 sys.stderr.write(err)
@@ -121,20 +135,28 @@ class KernelDocDirective(Directive):
                     lineoffset += 1
 
             node = nodes.section()
-            buf = self.state.memo.title_styles, self.state.memo.section_level, self.state.memo.reporter
+            self.do_parse(result, node)
+
+            return node.children
+
+        except Exception as e:  # pylint: disable=W0703
+            kernellog.warn(env.app, 'kernel-doc \'%s\' processing failed with: %s' %
+                           (" ".join(cmd), str(e)))
+            return [nodes.error(None, nodes.paragraph(text = "kernel-doc missing"))]
+
+    def do_parse(self, result, node):
+        if Use_SSI:
+            with switch_source_input(self.state, result):
+                self.state.nested_parse(result, 0, node, match_titles=1)
+        else:
+            save = self.state.memo.title_styles, self.state.memo.section_level, self.state.memo.reporter
             self.state.memo.reporter = AutodocReporter(result, self.state.memo.reporter)
             self.state.memo.title_styles, self.state.memo.section_level = [], 0
             try:
                 self.state.nested_parse(result, 0, node, match_titles=1)
             finally:
-                self.state.memo.title_styles, self.state.memo.section_level, self.state.memo.reporter = buf
+                self.state.memo.title_styles, self.state.memo.section_level, self.state.memo.reporter = save
 
-            return node.children
-
-        except Exception as e:  # pylint: disable=W0703
-            env.app.warn('kernel-doc \'%s\' processing failed with: %s' %
-                         (" ".join(cmd), str(e)))
-            return [nodes.error(None, nodes.paragraph(text = "kernel-doc missing"))]
 
 def setup(app):
     app.add_config_value('kerneldoc_bin', None, 'env')

Documentation/sphinx/kernellog.py

@@ -0,0 +1,28 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Sphinx has deprecated its older logging interface, but the replacement
+# only goes back to 1.6.  So here's a wrapper layer to keep around for
+# as long as we support 1.4.
+#
+import sphinx
+
+if sphinx.__version__[:3] >= '1.6':
+    UseLogging = True
+    from sphinx.util import logging
+    logger = logging.getLogger('kerneldoc')
+else:
+    UseLogging = False
+
+def warn(app, message):
+    if UseLogging:
+        logger.warning(message)
+    else:
+        app.warn(message)
+
+def verbose(app, message):
+    if UseLogging:
+        logger.verbose(message)
+    else:
+        app.verbose(message)
+
+

Documentation/sphinx/kfigure.py

@@ -60,6 +60,8 @@ import sphinx
 from sphinx.util.nodes import clean_astext
 from six import iteritems
 
+import kernellog
+
 PY3 = sys.version_info[0] == 3
 
 if PY3:
@@ -171,20 +173,20 @@ def setupTools(app):
     This function is called once, when the builder is initiated.
     """
     global dot_cmd, convert_cmd   # pylint: disable=W0603
-    app.verbose("kfigure: check installed tools ...")
+    kernellog.verbose(app, "kfigure: check installed tools ...")
 
     dot_cmd = which('dot')
     convert_cmd = which('convert')
 
     if dot_cmd:
-        app.verbose("use dot(1) from: " + dot_cmd)
+        kernellog.verbose(app, "use dot(1) from: " + dot_cmd)
     else:
-        app.warn("dot(1) not found, for better output quality install "
-                 "graphviz from http://www.graphviz.org")
+        kernellog.warn(app, "dot(1) not found, for better output quality install "
+                       "graphviz from http://www.graphviz.org")
     if convert_cmd:
-        app.verbose("use convert(1) from: " + convert_cmd)
+        kernellog.verbose(app, "use convert(1) from: " + convert_cmd)
     else:
-        app.warn(
+        kernellog.warn(app,
             "convert(1) not found, for SVG to PDF conversion install "
             "ImageMagick (https://www.imagemagick.org)")
 
@@ -220,12 +222,13 @@ def convert_image(img_node, translator, src_fname=None):
 
     # in kernel builds, use 'make SPHINXOPTS=-v' to see verbose messages
 
-    app.verbose('assert best format for: ' + img_node['uri'])
+    kernellog.verbose(app, 'assert best format for: ' + img_node['uri'])
 
     if in_ext == '.dot':
 
         if not dot_cmd:
-            app.verbose("dot from graphviz not available / include DOT raw.")
+            kernellog.verbose(app,
+                              "dot from graphviz not available / include DOT raw.")
             img_node.replace_self(file2literal(src_fname))
 
         elif translator.builder.format == 'latex':
@@ -252,7 +255,8 @@ def convert_image(img_node, translator, src_fname=None):
 
         if translator.builder.format == 'latex':
             if convert_cmd is None:
-                app.verbose("no SVG to PDF conversion available / include SVG raw.")
+                kernellog.verbose(app,
+                                  "no SVG to PDF conversion available / include SVG raw.")
                 img_node.replace_self(file2literal(src_fname))
             else:
                 dst_fname = path.join(translator.builder.outdir, fname + '.pdf')
@@ -265,18 +269,19 @@ def convert_image(img_node, translator, src_fname=None):
         _name = dst_fname[len(translator.builder.outdir) + 1:]
 
         if isNewer(dst_fname, src_fname):
-            app.verbose("convert: {out}/%s already exists and is newer" % _name)
+            kernellog.verbose(app,
+                              "convert: {out}/%s already exists and is newer" % _name)
 
         else:
             ok = False
             mkdir(path.dirname(dst_fname))
 
             if in_ext == '.dot':
-                app.verbose('convert DOT to: {out}/' + _name)
+                kernellog.verbose(app, 'convert DOT to: {out}/' + _name)
                 ok = dot2format(app, src_fname, dst_fname)
 
             elif in_ext == '.svg':
-                app.verbose('convert SVG to: {out}/' + _name)
+                kernellog.verbose(app, 'convert SVG to: {out}/' + _name)
                 ok = svg2pdf(app, src_fname, dst_fname)
 
             if not ok:
@@ -305,7 +310,8 @@ def dot2format(app, dot_fname, out_fname):
     with open(out_fname, "w") as out:
         exit_code = subprocess.call(cmd, stdout = out)
         if exit_code != 0:
-            app.warn("Error #%d when calling: %s" % (exit_code, " ".join(cmd)))
+            kernellog.warn(app,
+                          "Error #%d when calling: %s" % (exit_code, " ".join(cmd)))
     return bool(exit_code == 0)
 
 def svg2pdf(app, svg_fname, pdf_fname):
@@ -322,7 +328,7 @@ def svg2pdf(app, svg_fname, pdf_fname):
     # use stdout and stderr from parent
     exit_code = subprocess.call(cmd)
     if exit_code != 0:
-        app.warn("Error #%d when calling: %s" % (exit_code, " ".join(cmd)))
+        kernellog.warn(app, "Error #%d when calling: %s" % (exit_code, " ".join(cmd)))
     return bool(exit_code == 0)
 
 
@@ -415,15 +421,15 @@ def visit_kernel_render(self, node):
     app = self.builder.app
     srclang = node.get('srclang')
 
-    app.verbose('visit kernel-render node lang: "%s"' % (srclang))
+    kernellog.verbose(app, 'visit kernel-render node lang: "%s"' % (srclang))
 
     tmp_ext = RENDER_MARKUP_EXT.get(srclang, None)
     if tmp_ext is None:
-        app.warn('kernel-render: "%s" unknown / include raw.' % (srclang))
+        kernellog.warn(app, 'kernel-render: "%s" unknown / include raw.' % (srclang))
         return
 
     if not dot_cmd and tmp_ext == '.dot':
-        app.verbose("dot from graphviz not available / include raw.")
+        kernellog.verbose(app, "dot from graphviz not available / include raw.")
         return
 
     literal_block = node[0]

Documentation/usb/rio.txt

@@ -76,70 +76,30 @@ Additional Information and userspace tools
 Requirements
 ============
 
-A host with a USB port.  Ideally, either a UHCI (Intel) or OHCI
-(Compaq and others) hardware port should work.
+A host with a USB port running a Linux kernel with RIO 500 support enabled.
 
-A Linux development kernel (2.3.x) with USB support enabled or a
-backported version to linux-2.2.x.  See http://www.linux-usb.org for
-more information on accomplishing this.
+The driver is a module called rio500, which should be automatically loaded
+as you plug in your device. If that fails you can manually load it with
 
-A Linux kernel with RIO 500 support enabled.
+  modprobe rio500
 
-'lspci' which is only needed to determine the type of USB hardware
-available in your machine.
-
-Configuration
-
-Using `lspci -v`, determine the type of USB hardware available.
-
-  If you see something like::
-
-    USB Controller: ......
-    Flags: .....
-    I/O ports at ....
-
-  Then you have a UHCI based controller.
-
-  If you see something like::
-
-     USB Controller: .....
-     Flags: ....
-     Memory at .....
-
-  Then you have a OHCI based controller.
-
-Using `make menuconfig` or your preferred method for configuring the
-kernel, select 'Support for USB', 'OHCI/UHCI' depending on your
-hardware (determined from the steps above), 'USB Diamond Rio500 support', and
-'Preliminary USB device filesystem'.  Compile and install the modules
-(you may need to execute `depmod -a` to update the module
-dependencies).
-
-Add a device for the USB rio500::
+Udev should automatically create a device node as soon as plug in your device.
+If that fails, you can manually add a device for the USB rio500::
 
   mknod /dev/usb/rio500 c 180 64
 
-Set appropriate permissions for /dev/usb/rio500 (don't forget about
-group and world permissions).  Both read and write permissions are
+In that case, set appropriate permissions for /dev/usb/rio500 (don't forget
+about group and world permissions).  Both read and write permissions are
 required for proper operation.
 
-Load the appropriate modules (if compiled as modules):
-
-  OHCI::
-
-    modprobe usbcore
-    modprobe usb-ohci
-    modprobe rio500
-
-  UHCI::
-
-    modprobe usbcore
-    modprobe usb-uhci  (or uhci)
-    modprobe rio500
-
 That's it.  The Rio500 Utils at: http://rio500.sourceforge.net should
 be able to access the rio500.
 
+Limits
+======
+
+You can use only a single rio500 device at a time with your computer.
+
 Bugs
 ====
 

Documentation/vm/hmm.rst

@@ -288,15 +288,17 @@ For instance if the device flags for device entries are:
     WRITE (1 << 62)
 
 Now let say that device driver wants to fault with at least read a range then
-it does set:
-    range->default_flags = (1 << 63)
+it does set::
+
+    range->default_flags = (1 << 63);
     range->pfn_flags_mask = 0;
 
 and calls hmm_range_fault() as described above. This will fill fault all page
 in the range with at least read permission.
 
 Now let say driver wants to do the same except for one page in the range for
-which its want to have write. Now driver set:
+which its want to have write. Now driver set::
+
     range->default_flags = (1 << 63);
     range->pfn_flags_mask = (1 << 62);
     range->pfns[index_of_write] = (1 << 62);

MAINTAINERS

@@ -696,6 +696,7 @@ F:	drivers/input/mouse/alps.*
 ALTERA I2C CONTROLLER DRIVER
 M:	Thor Thayer <thor.thayer@linux.intel.com>
 S:	Maintained
+F:	Documentation/devicetree/bindings/i2c/i2c-altera.txt
 F:	drivers/i2c/busses/i2c-altera.c
 
 ALTERA MAILBOX DRIVER
@@ -1174,6 +1175,7 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/arm/arm-boards
 F:	Documentation/devicetree/bindings/auxdisplay/arm-charlcd.txt
 F:	Documentation/devicetree/bindings/clock/arm-integrator.txt
+F:	Documentation/devicetree/bindings/i2c/i2c-versatile.txt
 F:	Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt
 F:	Documentation/devicetree/bindings/mtd/arm-versatile.txt
 F:	arch/arm/mach-integrator/
@@ -1781,6 +1783,7 @@ ARM/LPC18XX ARCHITECTURE
 M:	Vladimir Zapolskiy <vz@mleia.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+F:	Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt
 F:	arch/arm/boot/dts/lpc43*
 F:	drivers/i2c/busses/i2c-lpc2k.c
 F:	drivers/memory/pl172.c
@@ -1794,6 +1797,7 @@ M:	Sylvain Lemieux <slemieux.tyco@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://github.com/vzapolskiy/linux-lpc32xx.git
 S:	Maintained
+F:	Documentation/devicetree/bindings/i2c/i2c-pnx.txt
 F:	arch/arm/boot/dts/lpc32*
 F:	arch/arm/mach-lpc32xx/
 F:	drivers/i2c/busses/i2c-pnx.c
@@ -1918,6 +1922,8 @@ ARM/NOMADIK/U300/Ux500 ARCHITECTURES
 M:	Linus Walleij <linus.walleij@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+F:	Documentation/devicetree/bindings/i2c/i2c-nomadik.txt
+F:	Documentation/devicetree/bindings/i2c/i2c-stu300.txt
 F:	arch/arm/mach-nomadik/
 F:	arch/arm/mach-u300/
 F:	arch/arm/mach-ux500/
@@ -2140,6 +2146,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-rockchip@lists.infradead.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git
 S:	Maintained
+F:	Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
 F:	arch/arm/boot/dts/rk3*
 F:	arch/arm/boot/dts/rv1108*
 F:	arch/arm/mach-rockchip/
@@ -2275,6 +2282,7 @@ M:	Patrice Chotard <patrice.chotard@st.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 W:	http://www.stlinux.com
 S:	Maintained
+F:	Documentation/devicetree/bindings/i2c/i2c-st.txt
 F:	arch/arm/mach-sti/
 F:	arch/arm/boot/dts/sti*
 F:	drivers/char/hw_random/st-rng.c
@@ -2466,6 +2474,7 @@ ARM/VT8500 ARM ARCHITECTURE
 M:	Tony Prisk <linux@prisktech.co.nz>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
+F:	Documentation/devicetree/bindings/i2c/i2c-wmt.txt
 F:	arch/arm/mach-vt8500/
 F:	drivers/clocksource/timer-vt8500.c
 F:	drivers/i2c/busses/i2c-wmt.c
@@ -2531,6 +2540,8 @@ F:	drivers/cpuidle/cpuidle-zynq.c
 F:	drivers/block/xsysace.c
 N:	zynq
 N:	xilinx
+F:	Documentation/devicetree/bindings/i2c/i2c-cadence.txt
+F:	Documentation/devicetree/bindings/i2c/i2c-xiic.txt
 F:	drivers/clocksource/timer-cadence-ttc.c
 F:	drivers/i2c/busses/i2c-cadence.c
 F:	drivers/mmc/host/sdhci-of-arasan.c
@@ -3049,8 +3060,9 @@ S:	Maintained
 F:	arch/riscv/net/
 
 BPF JIT for S390
-M:	Martin Schwidefsky <schwidefsky@de.ibm.com>
 M:	Heiko Carstens <heiko.carstens@de.ibm.com>
+M:	Vasily Gorbik <gor@linux.ibm.com>
+M:	Christian Borntraeger <borntraeger@de.ibm.com>
 L:	netdev@vger.kernel.org
 L:	bpf@vger.kernel.org
 S:	Maintained
@@ -7341,6 +7353,7 @@ I2C MV64XXX MARVELL AND ALLWINNER DRIVER
 M:	Gregory CLEMENT <gregory.clement@bootlin.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
+F:	Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
 F:	drivers/i2c/busses/i2c-mv64xxx.c
 
 I2C OVER PARALLEL PORT
@@ -11724,6 +11737,7 @@ M:	Peter Korsgaard <peter@korsgaard.com>
 M:	Andrew Lunn <andrew@lunn.ch>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
+F:	Documentation/devicetree/bindings/i2c/i2c-ocores.txt
 F:	Documentation/i2c/busses/i2c-ocores
 F:	drivers/i2c/busses/i2c-ocores.c
 F:	include/linux/platform_data/i2c-ocores.h
@@ -13043,7 +13057,6 @@ F:	Documentation/devicetree/bindings/net/qcom,dwmac.txt
 
 QUALCOMM GENERIC INTERFACE I2C DRIVER
 M:	Alok Chauhan <alokc@codeaurora.org>
-M:	Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
 L:	linux-i2c@vger.kernel.org
 L:	linux-arm-msm@vger.kernel.org
 S:	Supported
@@ -13363,6 +13376,7 @@ F:	drivers/clk/renesas/
 RENESAS EMEV2 I2C DRIVER
 M:	Wolfram Sang <wsa+renesas@sang-engineering.com>
 S:	Supported
+F:	Documentation/devicetree/bindings/i2c/i2c-emev2.txt
 F:	drivers/i2c/busses/i2c-emev2.c
 
 RENESAS ETHERNET DRIVERS
@@ -13384,6 +13398,8 @@ F:	drivers/iio/adc/rcar-gyroadc.c
 RENESAS R-CAR I2C DRIVERS
 M:	Wolfram Sang <wsa+renesas@sang-engineering.com>
 S:	Supported
+F:	Documentation/devicetree/bindings/i2c/i2c-rcar.txt
+F:	Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt
 F:	drivers/i2c/busses/i2c-rcar.c
 F:	drivers/i2c/busses/i2c-sh_mobile.c
 
@@ -13614,8 +13630,9 @@ S:	Maintained
 F:	drivers/video/fbdev/savage/
 
 S390
-M:	Martin Schwidefsky <schwidefsky@de.ibm.com>
 M:	Heiko Carstens <heiko.carstens@de.ibm.com>
+M:	Vasily Gorbik <gor@linux.ibm.com>
+M:	Christian Borntraeger <borntraeger@de.ibm.com>
 L:	linux-s390@vger.kernel.org
 W:	http://www.ibm.com/developerworks/linux/linux390/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux.git
@@ -14977,7 +14994,7 @@ S:	Odd Fixes
 F:	drivers/net/ethernet/adaptec/starfire*
 
 STEC S1220 SKD DRIVER
-M:	Bart Van Assche <bart.vanassche@wdc.com>
+M:	Damien Le Moal <Damien.LeMoal@wdc.com>
 L:	linux-block@vger.kernel.org
 S:	Maintained
 F:	drivers/block/skd*[ch]
@@ -15672,6 +15689,7 @@ R:	Bartosz Golaszewski <bgolaszewski@baylibre.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci.git
 S:	Supported
+F:	Documentation/devicetree/bindings/i2c/i2c-davinci.txt
 F:	arch/arm/mach-davinci/
 F:	drivers/i2c/busses/i2c-davinci.c
 F:	arch/arm/boot/dts/da850*
@@ -17293,7 +17311,7 @@ F:	Documentation/ABI/stable/sysfs-hypervisor-xen
 F:	Documentation/ABI/testing/sysfs-hypervisor-xen
 
 XEN NETWORK BACKEND DRIVER
-M:	Wei Liu <wei.liu2@citrix.com>
+M:	Wei Liu <wei.liu@kernel.org>
 M:	Paul Durrant <paul.durrant@citrix.com>
 L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
 L:	netdev@vger.kernel.org
@@ -17375,6 +17393,7 @@ M:	Jan Glauber <jglauber@cavium.com>
 L:	linux-i2c@vger.kernel.org
 W:	http://www.cavium.com
 S:	Supported
+F:	Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt
 F:	drivers/i2c/busses/i2c-xlp9xx.c
 
 XRA1403 GPIO EXPANDER

Makefile

@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 2
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc5
 NAME = Golden Lions
 
 # *DOCUMENTATION*
@@ -1228,9 +1228,8 @@ kselftest-clean:
 PHONY += kselftest-merge
 kselftest-merge:
 	$(if $(wildcard $(objtree)/.config),, $(error No .config exists, config your kernel first!))
-	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh \
-		-m $(objtree)/.config \
-		$(srctree)/tools/testing/selftests/*/config
+	$(Q)find $(srctree)/tools/testing/selftests -name config | \
+		xargs $(srctree)/scripts/kconfig/merge_config.sh -m $(objtree)/.config
 	+$(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
 
 # ---------------------------------------------------------------------------

arch/alpha/boot/stdio.c

@@ -1,10 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright (C) Paul Mackerras 1997.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
  */
 #include <stdarg.h>
 #include <stddef.h>

arch/alpha/include/asm/device.h

@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Arch specific extensions to struct device
- *
- * This file is released under the GPLv2
  */
 #include <asm-generic/device.h>
 

arch/alpha/include/uapi/asm/Kbuild

@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
 generated-y += unistd_32.h

arch/alpha/kernel/module.c

@@ -1,19 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*  Kernel module help for Alpha.
     Copyright (C) 2002 Richard Henderson.
 
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
 */
 #include <linux/moduleloader.h>
 #include <linux/elf.h>

arch/alpha/kernel/srm_env.c

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * srm_env.c - Access to SRM environment
  *             variables through linux' procfs
@@ -9,23 +10,6 @@
  * <J.A.K.Mouw@its.tudelft.nl>. It is based on an idea
  * provided by DEC^WCompaq^WIntel's "Jumpstart" CD. They
  * included a patch like this as well. Thanks for idea!
- *
- * This program is free software; you can redistribute
- * it and/or modify it under the terms of the GNU General
- * Public License version 2 as published by the Free Software
- * Foundation.
- *
- * This program is distributed in the hope that it will be
- * useful, but WITHOUT ANY WARRANTY; without even the implied
- * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
- * PURPOSE.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this program; if not, write to the
- * Free Software Foundation, Inc., 59 Temple Place,
- * Suite 330, Boston, MA  02111-1307  USA
- *
  */
 
 #include <linux/kernel.h>

arch/arc/Kbuild

@@ -1,2 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
 obj-y += kernel/
 obj-y += mm/

arch/arc/boot/dts/abilis_tb100.dtsi

@@ -1,22 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Abilis Systems TB100 SOC device tree
  *
  * Copyright (C) Abilis Systems 2013
  *
  * Author: Christian Ruppert <christian.ruppert@abilis.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
 /include/ "abilis_tb10x.dtsi"

arch/arc/boot/dts/abilis_tb100_dvk.dts

@@ -1,22 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Abilis Systems TB100 Development Kit PCB device tree
  *
  * Copyright (C) Abilis Systems 2013
  *
  * Author: Christian Ruppert <christian.ruppert@abilis.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
 /dts-v1/;

arch/arc/boot/dts/abilis_tb101.dtsi

@@ -1,22 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Abilis Systems TB101 SOC device tree
  *
  * Copyright (C) Abilis Systems 2013
  *
  * Author: Christian Ruppert <christian.ruppert@abilis.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
 /include/ "abilis_tb10x.dtsi"

arch/arc/boot/dts/abilis_tb101_dvk.dts

@@ -1,22 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Abilis Systems TB101 Development Kit PCB device tree
  *
  * Copyright (C) Abilis Systems 2013
  *
  * Author: Christian Ruppert <christian.ruppert@abilis.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
 /dts-v1/;

arch/arc/boot/dts/abilis_tb10x.dtsi

@@ -1,22 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Abilis Systems TB10X SOC device tree
  *
  * Copyright (C) Abilis Systems 2013
  *
  * Author: Christian Ruppert <christian.ruppert@abilis.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
 

arch/arc/boot/dts/eznps.dts

@@ -1,17 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright(c) 2015 EZchip Technologies.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * The full GNU General Public License is included in this distribution in
- * the file called "COPYING".
  */
 
 /dts-v1/;

arch/arc/boot/dts/hsdk.dts

@@ -11,7 +11,6 @@
  */
 /dts-v1/;
 
-#include <dt-bindings/net/ti-dp83867.h>
 #include <dt-bindings/reset/snps,hsdk-reset.h>
 
 / {
@@ -167,6 +166,24 @@
 			#clock-cells = <0>;
 		};
 
+		gpu_core_clk: gpu-core-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <400000000>;
+			#clock-cells = <0>;
+		};
+
+		gpu_dma_clk: gpu-dma-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <400000000>;
+			#clock-cells = <0>;
+		};
+
+		gpu_cfg_clk: gpu-cfg-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+			#clock-cells = <0>;
+		};
+
 		dmac_core_clk: dmac-core-clk {
 			compatible = "fixed-clock";
 			clock-frequency = <400000000>;
@@ -187,6 +204,7 @@
 			interrupt-names = "macirq";
 			phy-mode = "rgmii";
 			snps,pbl = <32>;
+			snps,multicast-filter-bins = <256>;
 			clocks = <&gmacclk>;
 			clock-names = "stmmaceth";
 			phy-handle = <&phy0>;
@@ -195,15 +213,15 @@
 			mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
 			dma-coherent;
 
+			tx-fifo-depth = <4096>;
+			rx-fifo-depth = <4096>;
+
 			mdio {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "snps,dwmac-mdio";
 				phy0: ethernet-phy@0 {
 					reg = <0>;
-					ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
-					ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
-					ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 				};
 			};
 		};
@@ -237,6 +255,14 @@
 			dma-coherent;
 		};
 
+		creg_gpio: gpio@14b0 {
+			compatible = "snps,creg-gpio-hsdk";
+			reg = <0x14b0 0x4>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			ngpios = <2>;
+		};
+
 		gpio: gpio@3000 {
 			compatible = "snps,dw-apb-gpio";
 			reg = <0x3000 0x20>;
@@ -252,6 +278,17 @@
 			};
 		};
 
+		gpu_3d: gpu@90000 {
+			compatible = "vivante,gc";
+			reg = <0x90000 0x4000>;
+			clocks = <&gpu_dma_clk>,
+				 <&gpu_cfg_clk>,
+				 <&gpu_core_clk>,
+				 <&gpu_core_clk>;
+			clock-names = "bus", "reg", "core", "shader";
+			interrupts = <28>;
+		};
+
 		dmac: dmac@80000 {
 			compatible = "snps,axi-dma-1.01a";
 			reg = <0x80000 0x400>;

arch/arc/configs/hsdk_defconfig

@@ -49,10 +49,12 @@ CONFIG_SERIAL_OF_PLATFORM=y
 CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_DWAPB=y
+CONFIG_GPIO_SNPS_CREG=y
 # CONFIG_HWMON is not set
 CONFIG_DRM=y
 # CONFIG_DRM_FBDEV_EMULATION is not set
 CONFIG_DRM_UDL=y
+CONFIG_DRM_ETNAVIV=y
 CONFIG_FB=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_USB_EHCI_HCD=y
@@ -64,7 +66,6 @@ CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
-# CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT3_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y

arch/arc/include/asm/cmpxchg.h

@@ -92,8 +92,11 @@ __cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)
 
 #endif /* CONFIG_ARC_HAS_LLSC */
 
-#define cmpxchg(ptr, o, n) ((typeof(*(ptr)))__cmpxchg((ptr), \
-				(unsigned long)(o), (unsigned long)(n)))
+#define cmpxchg(ptr, o, n) ({				\
+	(typeof(*(ptr)))__cmpxchg((ptr),		\
+				  (unsigned long)(o),	\
+				  (unsigned long)(n));	\
+})
 
 /*
  * atomic_cmpxchg is same as cmpxchg
@@ -198,8 +201,11 @@ static inline unsigned long __xchg(unsigned long val, volatile void *ptr,
 	return __xchg_bad_pointer();
 }
 
-#define xchg(ptr, with) ((typeof(*(ptr)))__xchg((unsigned long)(with), (ptr), \
-						 sizeof(*(ptr))))
+#define xchg(ptr, with) ({				\
+	(typeof(*(ptr)))__xchg((unsigned long)(with),	\
+			       (ptr),			\
+			       sizeof(*(ptr)));		\
+})
 
 #endif /* CONFIG_ARC_PLAT_EZNPS */
 

arch/arc/include/uapi/asm/Kbuild

@@ -1 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
 generic-y += ucontext.h

arch/arc/kernel/troubleshoot.c

@@ -1,8 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
  */
 
 #include <linux/ptrace.h>

arch/arc/mm/fault.c

@@ -66,7 +66,7 @@ void do_page_fault(unsigned long address, struct pt_regs *regs)
 	struct vm_area_struct *vma = NULL;
 	struct task_struct *tsk = current;
 	struct mm_struct *mm = tsk->mm;
-	int si_code = 0;
+	int si_code = SEGV_MAPERR;
 	int ret;
 	vm_fault_t fault;
 	int write = regs->ecr_cause & ECR_C_PROTV_STORE;  /* ST/EX */
@@ -81,16 +81,14 @@ void do_page_fault(unsigned long address, struct pt_regs *regs)
 	 * only copy the information from the master page table,
 	 * nothing more.
 	 */
-	if (address >= VMALLOC_START) {
+	if (address >= VMALLOC_START && !user_mode(regs)) {
 		ret = handle_kernel_vaddr_fault(address);
 		if (unlikely(ret))
-			goto bad_area_nosemaphore;
+			goto no_context;
 		else
 			return;
 	}
 
-	si_code = SEGV_MAPERR;
-
 	/*
 	 * If we're in an interrupt or have no user
 	 * context, we must not take the fault..
@@ -198,7 +196,6 @@ good_area:
 bad_area:
 	up_read(&mm->mmap_sem);
 
-bad_area_nosemaphore:
 	/* User mode accesses just cause a SIGSEGV */
 	if (user_mode(regs)) {
 		tsk->thread.fault_address = address;

arch/arc/mm/tlb.c

@@ -911,9 +911,11 @@ void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
 			  struct pt_regs *regs)
 {
 	struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
-	unsigned int pd0[mmu->ways];
 	unsigned long flags;
-	int set;
+	int set, n_ways = mmu->ways;
+
+	n_ways = min(n_ways, 4);
+	BUG_ON(mmu->ways > 4);
 
 	local_irq_save(flags);
 
@@ -921,9 +923,10 @@ void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
 	for (set = 0; set < mmu->sets; set++) {
 
 		int is_valid, way;
+		unsigned int pd0[4];
 
 		/* read out all the ways of current set */
-		for (way = 0, is_valid = 0; way < mmu->ways; way++) {
+		for (way = 0, is_valid = 0; way < n_ways; way++) {
 			write_aux_reg(ARC_REG_TLBINDEX,
 					  SET_WAY_TO_IDX(mmu, set, way));
 			write_aux_reg(ARC_REG_TLBCOMMAND, TLBRead);
@@ -937,14 +940,14 @@ void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
 			continue;
 
 		/* Scan the set for duplicate ways: needs a nested loop */
-		for (way = 0; way < mmu->ways - 1; way++) {
+		for (way = 0; way < n_ways - 1; way++) {
 
 			int n;
 
 			if (!pd0[way])
 				continue;
 
-			for (n = way + 1; n < mmu->ways; n++) {
+			for (n = way + 1; n < n_ways; n++) {
 				if (pd0[way] != pd0[n])
 					continue;
 

arch/arc/plat-axs10x/axs10x.c

@@ -1,17 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * AXS101/AXS103 Software Development Platform
  *
  * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #include <linux/of_fdt.h>

arch/arc/plat-eznps/ctop.c

@@ -1,17 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright(c) 2015 EZchip Technologies.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * The full GNU General Public License is included in this distribution in
- * the file called "COPYING".
  */
 
 #include <linux/sched.h>

arch/arc/plat-eznps/entry.S

@@ -1,19 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*******************************************************************************
 
   EZNPS CPU startup Code
   Copyright(c) 2012 EZchip Technologies.
 
-  This program is free software; you can redistribute it and/or modify it
-  under the terms and conditions of the GNU General Public License,
-  version 2, as published by the Free Software Foundation.
-
-  This program is distributed in the hope it will be useful, but WITHOUT
-  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-  FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
-  more details.
-
-  The full GNU General Public License is included in this distribution in
-  the file called "COPYING".
 
 *******************************************************************************/
 #include <linux/linkage.h>

arch/arc/plat-eznps/include/plat/ctop.h

@@ -1,17 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright(c) 2015 EZchip Technologies.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * The full GNU General Public License is included in this distribution in
- * the file called "COPYING".
  */
 
 #ifndef _PLAT_EZNPS_CTOP_H

arch/arc/plat-eznps/include/plat/mtm.h

@@ -1,17 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright(c) 2015 EZchip Technologies.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * The full GNU General Public License is included in this distribution in
- * the file called "COPYING".
  */
 
 #ifndef _PLAT_EZNPS_MTM_H

arch/arc/plat-eznps/include/plat/smp.h

@@ -1,17 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright(c) 2015 EZchip Technologies.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * The full GNU General Public License is included in this distribution in
- * the file called "COPYING".
  */
 
 #ifndef __PLAT_EZNPS_SMP_H

arch/arc/plat-eznps/mtm.c

@@ -1,17 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright(c) 2015 EZchip Technologies.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * The full GNU General Public License is included in this distribution in
- * the file called "COPYING".
  */
 
 #include <linux/smp.h>

arch/arc/plat-eznps/platform.c

@@ -1,17 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright(c) 2015 EZchip Technologies.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * The full GNU General Public License is included in this distribution in
- * the file called "COPYING".
  */
 
 #include <linux/init.h>

arch/arc/plat-eznps/smp.c

@@ -1,17 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright(c) 2015 EZchip Technologies.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * The full GNU General Public License is included in this distribution in
- * the file called "COPYING".
  */
 
 #include <linux/smp.h>

arch/arc/plat-tb10x/Kconfig

@@ -1,19 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-only
 # Abilis Systems TB10x platform kernel configuration file
 #
 # Author: Christian Ruppert <christian.ruppert@abilis.com>
 #
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
 
 
 menuconfig ARC_PLAT_TB10X

arch/arc/plat-tb10x/Makefile

@@ -1,19 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0-only
 # Abilis Systems TB10x platform Makefile
 #
 # Author: Christian Ruppert <christian.ruppert@abilis.com>
 #
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License version 2 as
-# published by the Free Software Foundation.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
 
 
 KBUILD_CFLAGS   += -Iarch/arc/plat-tb10x/include

arch/arc/plat-tb10x/tb10x.c

@@ -1,22 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Abilis Systems TB10x platform initialisation
  *
  * Copyright (C) Abilis Systems 2012
  *
  * Author: Christian Ruppert <christian.ruppert@abilis.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  */
 
 #include <linux/init.h>

arch/arm/boot/compressed/decompress.c

@@ -32,6 +32,7 @@
 extern char * strstr(const char * s1, const char *s2);
 extern size_t strlen(const char *s);
 extern int memcmp(const void *cs, const void *ct, size_t count);
+extern char * strchrnul(const char *, int);
 
 #ifdef CONFIG_KERNEL_GZIP
 #include "../../../../lib/decompress_inflate.c"

arch/arm/boot/dts/animeo_ip.dts

@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards
  *
  *  Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2 only.
  */
 
 /dts-v1/;

arch/arm/boot/dts/at91-qil_a9260.dts

@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91-qil_a9260.dts - Device Tree file for Calao QIL A9260 board
  *
  * Copyright (C) 2011-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 /dts-v1/;
 #include "at91sam9260.dtsi"

arch/arm/boot/dts/at91-sama5d4_ma5d4.dtsi

@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright (C) 2015 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 #include "sama5d4.dtsi"

arch/arm/boot/dts/at91-sama5d4_ma5d4evk.dts

@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright (C) 2015 Marek Vasut <marex@denx.de>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
  */
 
 /dts-v1/;

arch/arm/boot/dts/at91rm9200ek.dts

@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91rm9200ek.dts - Device Tree file for Atmel AT91RM9200 evaluation kit
  *
  *  Copyright (C) 2012 Joachim Eastwood <manabian@gmail.com>
- *
- * Licensed under GPLv2 only
  */
 /dts-v1/;
 #include "at91rm9200.dtsi"

arch/arm/boot/dts/at91sam9261.dtsi

@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9261.dtsi - Device Tree Include file for AT91SAM9261 SoC
  *
  *  Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
- *
- * Licensed under GPLv2 only.
  */
 
 #include <dt-bindings/pinctrl/at91.h>

arch/arm/boot/dts/at91sam9261ek.dts

@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9261ek.dts - Device Tree file for Atmel at91sam9261 reference board
  *
  *  Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
- *
- * Licensed under GPLv2 only.
  */
 /dts-v1/;
 #include "at91sam9261.dtsi"

arch/arm/boot/dts/at91sam9263.dtsi

@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9263.dtsi - Device Tree Include file for AT91SAM9263 family SoC
  *
  *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2 only.
  */
 
 #include <dt-bindings/pinctrl/at91.h>

arch/arm/boot/dts/at91sam9263ek.dts

@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9263ek.dts - Device Tree file for Atmel at91sam9263 reference board
  *
  *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2 only
  */
 /dts-v1/;
 #include "at91sam9263.dtsi"

arch/arm/boot/dts/at91sam9g15.dtsi

@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9g15.dtsi - Device Tree Include file for AT91SAM9G15 SoC
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 
 #include "at91sam9x5.dtsi"

arch/arm/boot/dts/at91sam9g20.dtsi

@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
  *
  *  Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 
 #include "at91sam9260.dtsi"

arch/arm/boot/dts/at91sam9g20ek.dts

@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9g20ek.dts - Device Tree file for Atmel at91sam9g20ek board
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 /dts-v1/;
 #include "at91sam9g20ek_common.dtsi"

arch/arm/boot/dts/at91sam9g20ek_2mmc.dts

@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9g20ek_2mmc.dts - Device Tree file for Atmel at91sam9g20ek 2 MMC board
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 /dts-v1/;
 #include "at91sam9g20ek_common.dtsi"

arch/arm/boot/dts/at91sam9g20ek_common.dtsi

@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9g20ek_common.dtsi - Device Tree file for Atmel at91sam9g20ek board
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 #include "at91sam9g20.dtsi"
 

arch/arm/boot/dts/at91sam9g25.dtsi

@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9g25.dtsi - Device Tree Include file for AT91SAM9G25 SoC
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 
 #include "at91sam9x5.dtsi"

arch/arm/boot/dts/at91sam9g35.dtsi

@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9g35.dtsi - Device Tree Include file for AT91SAM9G35 SoC
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 
 #include "at91sam9x5.dtsi"

arch/arm/boot/dts/at91sam9rlek.dts

@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9rlek.dts - Device Tree file for Atmel at91sam9rl reference board
  *
  *  Copyright (C) 2014 Microchip
  *  Alexandre Belloni <alexandre.belloni@free-electrons.com>
- *
- * Licensed under GPLv2 only
  */
 /dts-v1/;
 #include "at91sam9rl.dtsi"

arch/arm/boot/dts/at91sam9x25.dtsi

@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9x25.dtsi - Device Tree Include file for AT91SAM9X25 SoC
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 
 #include "at91sam9x5.dtsi"

arch/arm/boot/dts/at91sam9x35.dtsi

@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9x35.dtsi - Device Tree Include file for AT91SAM9X35 SoC
  *
  * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Licensed under GPLv2.
  */
 
 #include "at91sam9x5.dtsi"

arch/arm/boot/dts/at91sam9x5_can.dtsi

@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9x5_can.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
  * Ethernet interface.
  *
  * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- *
- * Licensed under GPLv2.
  */
 
 #include <dt-bindings/pinctrl/at91.h>

arch/arm/boot/dts/at91sam9x5_isi.dtsi

@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9x5_isi.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
  * Image Sensor Interface.
  *
  * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- *
- * Licensed under GPLv2.
  */
 
 #include <dt-bindings/pinctrl/at91.h>

arch/arm/boot/dts/at91sam9x5_lcd.dtsi

@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9x5_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
  * LCD controller.
  *
  * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- *
- * Licensed under GPLv2.
  */
 
 #include <dt-bindings/pinctrl/at91.h>

arch/arm/boot/dts/at91sam9x5_macb0.dtsi

@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
  * Ethernet interface.
  *
  * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- *
- * Licensed under GPLv2.
  */
 
 #include <dt-bindings/pinctrl/at91.h>

arch/arm/boot/dts/at91sam9x5_macb1.dtsi

@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9x5_macb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 2
  * Ethernet interfaces.
  *
  * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- *
- * Licensed under GPLv2.
  */
 
 #include <dt-bindings/pinctrl/at91.h>

arch/arm/boot/dts/at91sam9x5_usart3.dtsi

@@ -1,10 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * at91sam9x5_usart3.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
  * 4 USART.
  *
  * Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
- *
- * Licensed under GPLv2.
  */
 
 #include <dt-bindings/pinctrl/at91.h>

arch/arm/boot/dts/axm5516-amarillo.dts

@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * arch/arm/boot/dts/axm5516-amarillo.dts
  *
  * Copyright (C) 2013 LSI
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 /dts-v1/;

arch/arm/boot/dts/axm5516-cpus.dtsi

@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * arch/arm/boot/dts/axm5516-cpus.dtsi
  *
  * Copyright (C) 2013 LSI
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 / {

arch/arm/boot/dts/axm55xx.dtsi

@@ -1,12 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * arch/arm/boot/dts/axm55xx.dtsi
  *
  * Copyright (C) 2013 LSI
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>

arch/arm/boot/dts/bcm59056.dtsi

@@ -1,11 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
 * Copyright 2014 Linaro Limited
 * Author: Matt Porter <mporter@linaro.org>
-*
-* This program is free software; you can redistribute it and/or modify it
-* under  the terms of the GNU General  Public License as published by the
-* Free Software Foundation;  either version 2 of the License, or (at your
-* option) any later version.
 */
 
 &pmu {

arch/arm/boot/dts/da850-enbw-cmc.dts

@@ -1,13 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Device Tree for AM1808 EnBW CMC board
  *
  * Copyright 2012 DENX Software Engineering GmbH
  * Heiko Schocher <hs@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 /dts-v1/;
 #include "da850.dtsi"

arch/arm/boot/dts/da850-evm.dts

@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device Tree for DA850 EVM board
  *
  * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation, version 2.
  */
 /dts-v1/;
 #include "da850.dtsi"

arch/arm/boot/dts/da850-lcdk.dts

@@ -1,7 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright (c) 2016 BayLibre, Inc.
- *
- * Licensed under GPLv2.
  */
 /dts-v1/;
 #include "da850.dtsi"

arch/arm/boot/dts/da850-lego-ev3.dts

@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Device tree for LEGO MINDSTORMS EV3
  *
  * Copyright (C) 2017 David Lechner <david@lechnology.com>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation, version 2.
  */
 
 /dts-v1/;

arch/arm/boot/dts/da850.dtsi

@@ -1,11 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
 /*
  * Copyright 2012 DENX Software Engineering GmbH
  * Heiko Schocher <hs@denx.de>
- *
- * This program is free software; you can redistribute  it and/or modify it
- * under  the terms of  the GNU General  Public License as published by the
- * Free Software Foundation;  either version 2 of the  License, or (at your
- * option) any later version.
  */
 #include <dt-bindings/interrupt-controller/irq.h>
 

arch/arm/boot/dts/ecx-2000.dts

@@ -1,17 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright 2011-2012 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 /dts-v1/;

arch/arm/boot/dts/ecx-common.dtsi

@@ -1,17 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright 2011-2012 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 / {

arch/arm/boot/dts/ethernut5.dts

@@ -1,9 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * ethernut5.dts - Device Tree file for Ethernut 5 board
  *
  * Copyright (C) 2012 egnite GmbH <info@egnite.de>
- *
- * Licensed under GPLv2.
  */
 /dts-v1/;
 #include "at91sam9xe.dtsi"

arch/arm/boot/dts/hi3620-hi4511.dts

@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  *  Copyright (C) 2012-2013 Linaro Ltd.
  *  Author: Haojian Zhuang <haojian.zhuang@linaro.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
  */
 
 /dts-v1/;

arch/arm/boot/dts/hi3620.dtsi

@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Hisilicon Ltd. Hi3620 SoC
  *
@@ -5,10 +6,6 @@
  * Copyright (C) 2012-2013 Linaro Ltd.
  *
  * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
  */
 
 #include <dt-bindings/clock/hi3620-clock.h>

arch/arm/boot/dts/highbank.dts

@@ -1,17 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Copyright 2011-2012 Calxeda, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
 /dts-v1/;

arch/arm/boot/dts/hip04-d01.dts

@@ -1,10 +1,7 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  *  Copyright (C) 2013-2014 Linaro Ltd.
  *  Author: Haojian Zhuang <haojian.zhuang@linaro.org>
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  publishhed by the Free Software Foundation.
  */
 
 /dts-v1/;