Linux 5.15-rc7

Commit 110860541f ("mm/secretmem: use refcount_t instead of atomic_t")
attempted to fix the problem of secretmem_users wrapping to zero and
allowing suspend once again.

But it was reverted in commit 87066fdd2e ("Revert 'mm/secretmem: use
refcount_t instead of atomic_t'") because of the problems it caused - a
refcount_t was not semantically the right type to use.

Instead prevent secretmem_users from wrapping to zero by forbidding new
users if the number of users has wrapped from positive to negative.
This stops a long way short of reaching the necessary 4 billion users
where it wraps to zero again, so there's no need to be clever with
special anti-wrap types or checking the return value from atomic_inc().

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Jordy Zomer <jordy@pwning.systems>
Cc: Kees Cook <keescook@chromium.org>,
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

.mailmap

@@ -33,6 +33,8 @@ Al Viro <viro@zenIV.linux.org.uk>
 Andi Kleen <ak@linux.intel.com> <ak@suse.de>
 Andi Shyti <andi@etezian.org> <andi.shyti@samsung.com>
 Andreas Herrmann <aherrman@de.ibm.com>
+Andrej Shadura <andrew.shadura@collabora.co.uk>
+Andrej Shadura <andrew@shadura.me> <andrew@beldisplaytech.com>
 Andrew Morton <akpm@linux-foundation.org>
 Andrew Murray <amurray@thegoodpenguin.co.uk> <amurray@embedded-bits.co.uk>
 Andrew Murray <amurray@thegoodpenguin.co.uk> <andrew.murray@arm.com>

CREDITS

@@ -971,6 +971,7 @@ D: PowerPC
 N: Daniel Drake
 E: dsd@gentoo.org
 D: USBAT02 CompactFlash support in usb-storage
+D: ZD1211RW wireless driver
 S: UK
 
 N: Oleg Drokin

Documentation/admin-guide/cgroup-v2.rst

@@ -1226,7 +1226,7 @@ PAGE_SIZE multiple when read back.
 
 	Note that all fields in this file are hierarchical and the
 	file modified event can be generated due to an event down the
-	hierarchy. For for the local events at the cgroup level see
+	hierarchy. For the local events at the cgroup level see
 	memory.events.local.
 
 	  low
@@ -2170,19 +2170,19 @@ existing device files.
 
 Cgroup v2 device controller has no interface files and is implemented
 on top of cgroup BPF. To control access to device files, a user may
-create bpf programs of the BPF_CGROUP_DEVICE type and attach them
-to cgroups. On an attempt to access a device file, corresponding
-BPF programs will be executed, and depending on the return value
-the attempt will succeed or fail with -EPERM.
+create bpf programs of type BPF_PROG_TYPE_CGROUP_DEVICE and attach
+them to cgroups with BPF_CGROUP_DEVICE flag. On an attempt to access a
+device file, corresponding BPF programs will be executed, and depending
+on the return value the attempt will succeed or fail with -EPERM.
 
-A BPF_CGROUP_DEVICE program takes a pointer to the bpf_cgroup_dev_ctx
-structure, which describes the device access attempt: access type
-(mknod/read/write) and device (type, major and minor numbers).
-If the program returns 0, the attempt fails with -EPERM, otherwise
-it succeeds.
+A BPF_PROG_TYPE_CGROUP_DEVICE program takes a pointer to the
+bpf_cgroup_dev_ctx structure, which describes the device access attempt:
+access type (mknod/read/write) and device (type, major and minor numbers).
+If the program returns 0, the attempt fails with -EPERM, otherwise it
+succeeds.
 
-An example of BPF_CGROUP_DEVICE program may be found in the kernel
-source tree in the tools/testing/selftests/bpf/progs/dev_cgroup.c file.
+An example of BPF_PROG_TYPE_CGROUP_DEVICE program may be found in
+tools/testing/selftests/bpf/progs/dev_cgroup.c in the kernel source tree.
 
 
 RDMA

Documentation/admin-guide/kernel-parameters.txt

@@ -1266,7 +1266,7 @@
 			The VGA and EFI output is eventually overwritten by
 			the real console.
 
-			The xen output can only be used by Xen PV guests.
+			The xen option can only be used in Xen domains.
 
 			The sclp output can only be used on s390.
 

Documentation/core-api/irq/irq-domain.rst

@@ -175,9 +175,10 @@ for IRQ numbers that are passed to struct device registrations.  In that
 case the Linux IRQ numbers cannot be dynamically assigned and the legacy
 mapping should be used.
 
-As the name implies, the *_legacy() functions are deprecated and only
+As the name implies, the \*_legacy() functions are deprecated and only
 exist to ease the support of ancient platforms. No new users should be
-added.
+added. Same goes for the \*_simple() functions when their use results
+in the legacy behaviour.
 
 The legacy map assumes a contiguous range of IRQ numbers has already
 been allocated for the controller and that the IRQ number can be

Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml

@@ -50,7 +50,6 @@ properties:
               data-lanes:
                 description: array of physical DSI data lane indexes.
                 minItems: 1
-                maxItems: 4
                 items:
                   - const: 1
                   - const: 2
@@ -71,7 +70,6 @@ properties:
               data-lanes:
                 description: array of physical DSI data lane indexes.
                 minItems: 1
-                maxItems: 4
                 items:
                   - const: 1
                   - const: 2

Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml

@@ -18,7 +18,7 @@ properties:
     const: ti,sn65dsi86
 
   reg:
-    const: 0x2d
+    enum: [ 0x2c, 0x2d ]
 
   enable-gpios:
     maxItems: 1

Documentation/devicetree/bindings/display/panel/ilitek,ili9341.yaml

@@ -22,7 +22,7 @@ properties:
     items:
       - enum:
           # ili9341 240*320 Color on stm32f429-disco board
-        - st,sf-tc240t-9370-t
+          - st,sf-tc240t-9370-t
       - const: ilitek,ili9341
 
   reg: true

Documentation/devicetree/bindings/interconnect/qcom,sdm660.yaml

@@ -31,11 +31,11 @@ properties:
 
   clocks:
     minItems: 1
-    maxItems: 3
+    maxItems: 7
 
   clock-names:
     minItems: 1
-    maxItems: 3
+    maxItems: 7
 
 required:
   - compatible
@@ -72,6 +72,32 @@ allOf:
           contains:
             enum:
               - qcom,sdm660-a2noc
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Bus Clock.
+            - description: Bus A Clock.
+            - description: IPA Clock.
+            - description: UFS AXI Clock.
+            - description: Aggregate2 UFS AXI Clock.
+            - description: Aggregate2 USB3 AXI Clock.
+            - description: Config NoC USB2 AXI Clock.
+        clock-names:
+          items:
+            - const: bus
+            - const: bus_a
+            - const: ipa
+            - const: ufs_axi
+            - const: aggre2_ufs_axi
+            - const: aggre2_usb3_axi
+            - const: cfg_noc_usb2_axi
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,sdm660-bimc
               - qcom,sdm660-cnoc
               - qcom,sdm660-gnoc
@@ -91,6 +117,7 @@ examples:
   - |
       #include <dt-bindings/clock/qcom,rpmcc.h>
       #include <dt-bindings/clock/qcom,mmcc-sdm660.h>
+      #include <dt-bindings/clock/qcom,gcc-sdm660.h>
 
       bimc: interconnect@1008000 {
               compatible = "qcom,sdm660-bimc";
@@ -123,9 +150,20 @@ examples:
               compatible = "qcom,sdm660-a2noc";
               reg = <0x01704000 0xc100>;
               #interconnect-cells = <1>;
-              clock-names = "bus", "bus_a";
+              clock-names = "bus",
+                            "bus_a",
+                            "ipa",
+                            "ufs_axi",
+                            "aggre2_ufs_axi",
+                            "aggre2_usb3_axi",
+                            "cfg_noc_usb2_axi";
               clocks = <&rpmcc RPM_SMD_AGGR2_NOC_CLK>,
-                       <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>;
+                       <&rpmcc RPM_SMD_AGGR2_NOC_A_CLK>,
+                       <&rpmcc RPM_SMD_IPA_CLK>,
+                       <&gcc GCC_UFS_AXI_CLK>,
+                       <&gcc GCC_AGGRE2_UFS_AXI_CLK>,
+                       <&gcc GCC_AGGRE2_USB3_AXI_CLK>,
+                       <&gcc GCC_CFG_NOC_USB2_AXI_CLK>;
       };
 
       mnoc: interconnect@1745000 {

Documentation/devicetree/bindings/media/i2c/ovti,ov5647.yaml

@@ -31,7 +31,7 @@ properties:
     maxItems: 1
 
   port:
-    $ref: /schemas/graph.yaml#/properties/port
+    $ref: /schemas/graph.yaml#/$defs/port-base
     additionalProperties: false
 
     properties:

Documentation/devicetree/bindings/media/i2c/ovti,ov9282.yaml

@@ -38,7 +38,7 @@ properties:
 
   port:
     additionalProperties: false
-    $ref: /schemas/graph.yaml#/properties/port
+    $ref: /schemas/graph.yaml#/$defs/port-base
 
     properties:
       endpoint:

Documentation/devicetree/bindings/media/i2c/sony,imx335.yaml

@@ -38,7 +38,7 @@ properties:
 
   port:
     additionalProperties: false
-    $ref: /schemas/graph.yaml#/properties/port
+    $ref: /schemas/graph.yaml#/$defs/port-base
 
     properties:
       endpoint:

Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml

@@ -38,7 +38,7 @@ properties:
 
   port:
     additionalProperties: false
-    $ref: /schemas/graph.yaml#/properties/port
+    $ref: /schemas/graph.yaml#/$defs/port-base
 
     properties:
       endpoint:

Documentation/devicetree/bindings/mfd/brcm,cru.yaml

@@ -32,13 +32,13 @@ properties:
   "#size-cells":
     const: 1
 
-  pinctrl:
-    $ref: ../pinctrl/brcm,ns-pinmux.yaml
-
 patternProperties:
   '^clock-controller@[a-f0-9]+$':
     $ref: ../clock/brcm,iproc-clocks.yaml
 
+  '^pin-controller@[a-f0-9]+$':
+    $ref: ../pinctrl/brcm,ns-pinmux.yaml
+
   '^thermal@[a-f0-9]+$':
     $ref: ../thermal/brcm,ns-thermal.yaml
 
@@ -73,9 +73,10 @@ examples:
                                  "iprocfast", "sata1", "sata2";
         };
 
-        pinctrl {
+        pin-controller@1c0 {
             compatible = "brcm,bcm4708-pinmux";
-            offset = <0x1c0>;
+            reg = <0x1c0 0x24>;
+            reg-names = "cru_gpio_control";
         };
 
         thermal@2c0 {

Documentation/devicetree/bindings/mmc/snps,dwcmshc-sdhci.yaml

@@ -20,9 +20,7 @@ properties:
       - snps,dwcmshc-sdhci
 
   reg:
-    minItems: 1
-    items:
-      - description: Offset and length of the register set for the device
+    maxItems: 1
 
   interrupts:
     maxItems: 1

Documentation/devicetree/bindings/net/dsa/marvell.txt

@@ -83,7 +83,7 @@ Example:
 		#interrupt-cells = <2>;
 
 		switch0: switch@0 {
-			compatible = "marvell,mv88e6390";
+			compatible = "marvell,mv88e6190";
 			reg = <0>;
 			reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
 

Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml

@@ -34,7 +34,6 @@ properties:
 
   clocks:
     minItems: 3
-    maxItems: 5
     items:
       - description: MAC host clock
       - description: MAC apb clock

Documentation/devicetree/bindings/net/snps,dwmac.yaml

@@ -21,6 +21,7 @@ select:
       contains:
         enum:
           - snps,dwmac
+          - snps,dwmac-3.40a
           - snps,dwmac-3.50a
           - snps,dwmac-3.610
           - snps,dwmac-3.70a
@@ -76,6 +77,7 @@ properties:
         - rockchip,rk3399-gmac
         - rockchip,rv1108-gmac
         - snps,dwmac
+        - snps,dwmac-3.40a
         - snps,dwmac-3.50a
         - snps,dwmac-3.610
         - snps,dwmac-3.70a

Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml

@@ -41,7 +41,6 @@ properties:
       - description: builtin MSI controller.
 
   interrupt-names:
-    minItems: 1
     items:
       - const: msi
 

Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml

@@ -17,9 +17,6 @@ description:
 
   A list of pins varies across chipsets so few bindings are available.
 
-  Node of the pinmux must be nested in the CRU (Central Resource Unit) "syscon"
-  node.
-
 properties:
   compatible:
     enum:
@@ -27,10 +24,11 @@ properties:
       - brcm,bcm4709-pinmux
       - brcm,bcm53012-pinmux
 
-  offset:
-    description: offset of pin registers in the CRU block
+  reg:
     maxItems: 1
-    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+  reg-names:
+    const: cru_gpio_control
 
 patternProperties:
   '-pins$':
@@ -72,23 +70,20 @@ allOf:
                         uart1_grp ]
 
 required:
-  - offset
+  - reg
+  - reg-names
 
 additionalProperties: false
 
 examples:
   - |
-    cru@1800c100 {
-        compatible = "syscon", "simple-mfd";
-        reg = <0x1800c100 0x1a4>;
+    pin-controller@1800c1c0 {
+        compatible = "brcm,bcm4708-pinmux";
+        reg = <0x1800c1c0 0x24>;
+        reg-names = "cru_gpio_control";
 
-        pinctrl {
-            compatible = "brcm,bcm4708-pinmux";
-            offset = <0xc0>;
-
-            spi-pins {
-                function = "spi";
-                groups = "spi_grp";
-            };
+        spi-pins {
+            function = "spi";
+            groups = "spi_grp";
         };
     };

Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.yaml

@@ -171,7 +171,7 @@ examples:
       cs-gpios = <&gpio0 13 0>,
                  <&gpio0 14 0>;
       rx-sample-delay-ns = <3>;
-      spi-flash@1 {
+      flash@1 {
         compatible = "spi-nand";
         reg = <1>;
         rx-sample-delay-ns = <7>;

Documentation/filesystems/ntfs3.rst

@@ -4,103 +4,112 @@
 NTFS3
 =====
 
-
 Summary and Features
 ====================
 
-NTFS3 is fully functional NTFS Read-Write driver. The driver works with
-NTFS versions up to 3.1, normal/compressed/sparse files
-and journal replaying. File system type to use on mount is 'ntfs3'.
+NTFS3 is fully functional NTFS Read-Write driver. The driver works with NTFS
+versions up to 3.1. File system type to use on mount is *ntfs3*.
 
 - This driver implements NTFS read/write support for normal, sparse and
   compressed files.
-- Supports native journal replaying;
-- Supports extended attributes
-	Predefined extended attributes:
-	- 'system.ntfs_security' gets/sets security
-			descriptor (SECURITY_DESCRIPTOR_RELATIVE)
-	- 'system.ntfs_attrib' gets/sets ntfs file/dir attributes.
-		Note: applied to empty files, this allows to switch type between
-		sparse(0x200), compressed(0x800) and normal;
+- Supports native journal replaying.
 - Supports NFS export of mounted NTFS volumes.
+- Supports extended attributes. Predefined extended attributes:
+
+	- *system.ntfs_security* gets/sets security
+
+		Descriptor: SECURITY_DESCRIPTOR_RELATIVE
+
+	- *system.ntfs_attrib* gets/sets ntfs file/dir attributes.
+
+	  Note: Applied to empty files, this allows to switch type between
+	  sparse(0x200), compressed(0x800) and normal.
 
 Mount Options
 =============
 
 The list below describes mount options supported by NTFS3 driver in addition to
-generic ones.
+generic ones. You can use every mount option with **no** option. If it is in
+this table marked with no it means default is without **no**.
 
-===============================================================================
+.. flat-table::
+   :widths: 1 5
+   :fill-cells:
 
-nls=name		This option informs the driver how to interpret path
-			strings and translate them to Unicode and back. If
-			this option is not set, the default codepage will be
-			used (CONFIG_NLS_DEFAULT).
-			Examples:
-				'nls=utf8'
+   * - iocharset=name
+     - This option informs the driver how to interpret path strings and
+       translate them to Unicode and back. If this option is not set, the
+       default codepage will be used (CONFIG_NLS_DEFAULT).
 
-uid=
-gid=
-umask=			Controls the default permissions for files/directories created
-			after the NTFS volume is mounted.
+       Example: iocharset=utf8
 
-fmask=
-dmask=			Instead of specifying umask which applies both to
-			files and directories, fmask applies only to files and
-			dmask only to directories.
+   * - uid=
+     - :rspan:`1`
+   * - gid=
 
-nohidden		Files with the Windows-specific HIDDEN (FILE_ATTRIBUTE_HIDDEN)
-			attribute will not be shown under Linux.
+   * - umask=
+     - Controls the default permissions for files/directories created after
+       the NTFS volume is mounted.
 
-sys_immutable		Files with the Windows-specific SYSTEM
-			(FILE_ATTRIBUTE_SYSTEM) attribute will be marked as system
-			immutable files.
+   * - dmask=
+     - :rspan:`1` Instead of specifying umask which applies both to files and
+       directories, fmask applies only to files and dmask only to directories.
+   * - fmask=
 
-discard			Enable support of the TRIM command for improved performance
-			on delete operations, which is recommended for use with the
-			solid-state drives (SSD).
+   * - noacsrules
+     - "No access rules" mount option sets access rights for files/folders to
+       777 and owner/group to root. This mount option absorbs all other
+       permissions.
 
-force			Forces the driver to mount partitions even if 'dirty' flag
-			(volume dirty) is set. Not recommended for use.
+       - Permissions change for files/folders will be reported as successful,
+	 but they will remain 777.
 
-sparse			Create new files as "sparse".
+       - Owner/group change will be reported as successful, butthey will stay
+	 as root.
 
-showmeta		Use this parameter to show all meta-files (System Files) on
-			a mounted NTFS partition.
-			By default, all meta-files are hidden.
+   * - nohidden
+     - Files with the Windows-specific HIDDEN (FILE_ATTRIBUTE_HIDDEN) attribute
+       will not be shown under Linux.
 
-prealloc		Preallocate space for files excessively when file size is
-			increasing on writes. Decreases fragmentation in case of
-			parallel write operations to different files.
+   * - sys_immutable
+     - Files with the Windows-specific SYSTEM (FILE_ATTRIBUTE_SYSTEM) attribute
+       will be marked as system immutable files.
 
-no_acs_rules		"No access rules" mount option sets access rights for
-			files/folders to 777 and owner/group to root. This mount
-			option absorbs all other permissions:
-			- permissions change for files/folders will be reported
-				as successful, but they will remain 777;
-			- owner/group change will be reported as successful, but
-				they will stay as root
+   * - discard
+     - Enable support of the TRIM command for improved performance on delete
+       operations, which is recommended for use with the solid-state drives
+       (SSD).
 
-acl			Support POSIX ACLs (Access Control Lists). Effective if
-			supported by Kernel. Not to be confused with NTFS ACLs.
-			The option specified as acl enables support for POSIX ACLs.
+   * - force
+     - Forces the driver to mount partitions even if volume is marked dirty.
+       Not recommended for use.
 
-noatime			All files and directories will not update their last access
-			time attribute if a partition is mounted with this parameter.
-			This option can speed up file system operation.
+   * - sparse
+     - Create new files as sparse.
 
-===============================================================================
+   * - showmeta
+     - Use this parameter to show all meta-files (System Files) on a mounted
+       NTFS partition. By default, all meta-files are hidden.
 
-ToDo list
+   * - prealloc
+     - Preallocate space for files excessively when file size is increasing on
+       writes. Decreases fragmentation in case of parallel write operations to
+       different files.
+
+   * - acl
+     - Support POSIX ACLs (Access Control Lists). Effective if supported by
+       Kernel. Not to be confused with NTFS ACLs. The option specified as acl
+       enables support for POSIX ACLs.
+
+Todo list
 =========
-
-- Full journaling support (currently journal replaying is supported) over JBD.
-
+- Full journaling support over JBD. Currently journal replaying is supported
+  which is not necessarily as effectice as JBD would be.
 
 References
 ==========
-https://www.paragon-software.com/home/ntfs-linux-professional/
-	- Commercial version of the NTFS driver for Linux.
+- Commercial version of the NTFS driver for Linux.
+	https://www.paragon-software.com/home/ntfs-linux-professional/
 
-almaz.alexandrovich@paragon-software.com
-	- Direct e-mail address for feedback and requests on the NTFS3 implementation.
+- Direct e-mail address for feedback and requests on the NTFS3 implementation.
+	almaz.alexandrovich@paragon-software.com

Documentation/gpu/amdgpu.rst

@@ -300,8 +300,8 @@ pcie_replay_count
 .. kernel-doc:: drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
    :doc: pcie_replay_count
 
-+GPU SmartShift Information
-============================
+GPU SmartShift Information
+==========================
 
 GPU SmartShift information via sysfs
 

Documentation/gpu/drm-internals.rst

@@ -111,15 +111,6 @@ Component Helper Usage
 .. kernel-doc:: drivers/gpu/drm/drm_drv.c
    :doc: component helper usage recommendations
 
-IRQ Helper Library
-~~~~~~~~~~~~~~~~~~
-
-.. kernel-doc:: drivers/gpu/drm/drm_irq.c
-   :doc: irq helpers
-
-.. kernel-doc:: drivers/gpu/drm/drm_irq.c
-   :export:
-
 Memory Manager Initialization
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 

Documentation/hwmon/k10temp.rst

@@ -132,20 +132,3 @@ On Family 17h and Family 18h CPUs, additional temperature sensors may report
 Core Complex Die (CCD) temperatures. Up to 8 such temperatures are reported
 as temp{3..10}_input, labeled Tccd{1..8}. Actual support depends on the CPU
 variant.
-
-Various Family 17h and 18h CPUs report voltage and current telemetry
-information. The following attributes may be reported.
-
-Attribute	Label	Description
-===============	=======	================
-in0_input	Vcore	Core voltage
-in1_input	Vsoc	SoC voltage
-curr1_input	Icore	Core current
-curr2_input	Isoc	SoC current
-===============	=======	================
-
-Current values are raw (unscaled) as reported by the CPU. Core current is
-reported as multiples of 1A / LSB. SoC is reported as multiples of 0.25A
-/ LSB. The real current is board specific. Reported currents should be seen
-as rough guidance, and should be scaled using sensors3.conf as appropriate
-for a given board.

Documentation/networking/device_drivers/ethernet/intel/ice.rst

@@ -851,7 +851,7 @@ NOTES:
 - 0x88A8 traffic will not be received unless VLAN stripping is disabled with
   the following command::
 
-    # ethool -K <ethX> rxvlan off
+    # ethtool -K <ethX> rxvlan off
 
 - 0x88A8/0x8100 double VLANs cannot be used with 0x8100 or 0x8100/0x8100 VLANS
   configured on the same port. 0x88a8/0x8100 traffic will not be received if

Documentation/networking/devlink/ice.rst

@@ -30,10 +30,11 @@ The ``ice`` driver reports the following versions
         PHY, link, etc.
     * - ``fw.mgmt.api``
       - running
-      - 1.5
-      - 2-digit version number of the API exported over the AdminQ by the
-        management firmware. Used by the driver to identify what commands
-        are supported.
+      - 1.5.1
+      - 3-digit version number (major.minor.patch) of the API exported over
+        the AdminQ by the management firmware. Used by the driver to
+        identify what commands are supported. Historical versions of the
+        kernel only displayed a 2-digit version number (major.minor).
     * - ``fw.mgmt.build``
       - running
       - 0x305d955f

Documentation/networking/mctp.rst

@@ -59,11 +59,11 @@ specified with a ``sockaddr`` type, with a single-byte endpoint address:
     };
 
     struct sockaddr_mctp {
-            unsigned short int	smctp_family;
-            int			smctp_network;
-            struct mctp_addr	smctp_addr;
-            __u8		smctp_type;
-            __u8		smctp_tag;
+            __kernel_sa_family_t smctp_family;
+            unsigned int         smctp_network;
+            struct mctp_addr     smctp_addr;
+            __u8                 smctp_type;
+            __u8                 smctp_tag;
     };
 
     #define MCTP_NET_ANY	0x0

Documentation/userspace-api/vduse.rst

@@ -18,7 +18,7 @@ types can be added after the security issue of corresponding device driver
 is clarified or fixed in the future.
 
 Create/Destroy VDUSE devices
-------------------------
+----------------------------
 
 VDUSE devices are created as follows:
 

MAINTAINERS

@@ -414,7 +414,8 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
 F:	drivers/acpi/pmic/
 
 ACPI THERMAL DRIVER
-M:	Zhang Rui <rui.zhang@intel.com>
+M:	Rafael J. Wysocki <rafael@kernel.org>
+R:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
 S:	Supported
 W:	https://01.org/linux-acpi
@@ -810,7 +811,7 @@ F:	Documentation/devicetree/bindings/dma/altr,msgdma.yaml
 F:	drivers/dma/altera-msgdma.c
 
 ALTERA PIO DRIVER
-M:	Joyce Ooi <joyce.ooi@intel.com>
+M:	Mun Yew Tham <mun.yew.tham@intel.com>
 L:	linux-gpio@vger.kernel.org
 S:	Maintained
 F:	drivers/gpio/gpio-altera.c
@@ -977,12 +978,12 @@ L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/amd-pmc.*
 
-AMD POWERPLAY
+AMD POWERPLAY AND SWSMU
 M:	Evan Quan <evan.quan@amd.com>
 L:	amd-gfx@lists.freedesktop.org
 S:	Supported
 T:	git https://gitlab.freedesktop.org/agd5f/linux.git
-F:	drivers/gpu/drm/amd/pm/powerplay/
+F:	drivers/gpu/drm/amd/pm/
 
 AMD PTDMA DRIVER
 M:	Sanjay R Mehta <sanju.mehta@amd.com>
@@ -1275,6 +1276,7 @@ F:	drivers/input/mouse/bcm5974.c
 
 APPLE DART IOMMU DRIVER
 M:	Sven Peter <sven@svenpeter.dev>
+R:	Alyssa Rosenzweig <alyssa@rosenzweig.io>
 L:	iommu@lists.linux-foundation.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/iommu/apple,dart.yaml
@@ -1711,6 +1713,8 @@ F:	drivers/*/*alpine*
 
 ARM/APPLE MACHINE SUPPORT
 M:	Hector Martin <marcan@marcan.st>
+M:	Sven Peter <sven@svenpeter.dev>
+R:	Alyssa Rosenzweig <alyssa@rosenzweig.io>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 W:	https://asahilinux.org
@@ -2236,6 +2240,7 @@ F:	arch/arm/mach-pxa/mioa701.c
 
 ARM/MStar/Sigmastar Armv7 SoC support
 M:	Daniel Palmer <daniel@thingy.jp>
+M:	Romain Perier <romain.perier@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 W:	http://linux-chenxing.org/
@@ -2712,6 +2717,7 @@ F:	drivers/power/reset/keystone-reset.c
 
 ARM/TEXAS INSTRUMENTS K3 ARCHITECTURE
 M:	Nishanth Menon <nm@ti.com>
+M:	Vignesh Raghavendra <vigneshr@ti.com>
 M:	Tero Kristo <kristo@kernel.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
@@ -2804,9 +2810,8 @@ F:	arch/arm/mach-pxa/include/mach/vpac270.h
 F:	arch/arm/mach-pxa/vpac270.c
 
 ARM/VT8500 ARM ARCHITECTURE
-M:	Tony Prisk <linux@prisktech.co.nz>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
+S:	Orphan
 F:	Documentation/devicetree/bindings/i2c/i2c-wmt.txt
 F:	arch/arm/mach-vt8500/
 F:	drivers/clocksource/timer-vt8500.c
@@ -2962,7 +2967,7 @@ F:	crypto/async_tx/
 F:	include/linux/async_tx.h
 
 AT24 EEPROM DRIVER
-M:	Bartosz Golaszewski <bgolaszewski@baylibre.com>
+M:	Bartosz Golaszewski <brgl@bgdev.pl>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux.git
@@ -3385,9 +3390,11 @@ F:	Documentation/networking/filter.rst
 F:	Documentation/userspace-api/ebpf/
 F:	arch/*/net/*
 F:	include/linux/bpf*
+F:	include/linux/btf*
 F:	include/linux/filter.h
 F:	include/trace/events/xdp.h
 F:	include/uapi/linux/bpf*
+F:	include/uapi/linux/btf*
 F:	include/uapi/linux/filter.h
 F:	kernel/bpf/
 F:	kernel/trace/bpf_trace.c
@@ -3821,7 +3828,6 @@ F:	drivers/scsi/mpi3mr/
 
 BROADCOM NETXTREME-E ROCE DRIVER
 M:	Selvin Xavier <selvin.xavier@broadcom.com>
-M:	Naresh Kumar PBS <nareshkumar.pbs@broadcom.com>
 L:	linux-rdma@vger.kernel.org
 S:	Supported
 W:	http://www.broadcom.com
@@ -4656,7 +4662,7 @@ W:	http://linux-cifs.samba.org/
 T:	git git://git.samba.org/sfrench/cifs-2.6.git
 F:	Documentation/admin-guide/cifs/
 F:	fs/cifs/
-F:	fs/cifs_common/
+F:	fs/smbfs_common/
 
 COMPACTPCI HOTPLUG CORE
 M:	Scott Murray <scott@spiteful.org>
@@ -7337,10 +7343,11 @@ F:	include/uapi/linux/fpga-dfl.h
 
 FPGA MANAGER FRAMEWORK
 M:	Moritz Fischer <mdf@kernel.org>
+M:	Wu Hao <hao.wu@intel.com>
+M:	Xu Yilun <yilun.xu@intel.com>
 R:	Tom Rix <trix@redhat.com>
 L:	linux-fpga@vger.kernel.org
 S:	Maintained
-W:	http://www.rocketboards.org
 Q:	http://patchwork.kernel.org/project/linux-fpga/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga.git
 F:	Documentation/devicetree/bindings/fpga/
@@ -7434,7 +7441,7 @@ FREESCALE IMX / MXC FEC DRIVER
 M:	Joakim Zhang <qiangqing.zhang@nxp.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	Documentation/devicetree/bindings/net/fsl-fec.txt
+F:	Documentation/devicetree/bindings/net/fsl,fec.yaml
 F:	drivers/net/ethernet/freescale/fec.h
 F:	drivers/net/ethernet/freescale/fec_main.c
 F:	drivers/net/ethernet/freescale/fec_ptp.c
@@ -7986,7 +7993,7 @@ F:	include/linux/gpio/regmap.h
 
 GPIO SUBSYSTEM
 M:	Linus Walleij <linus.walleij@linaro.org>
-M:	Bartosz Golaszewski <bgolaszewski@baylibre.com>
+M:	Bartosz Golaszewski <brgl@bgdev.pl>
 L:	linux-gpio@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git
@@ -8608,9 +8615,8 @@ F:	Documentation/devicetree/bindings/iio/humidity/st,hts221.yaml
 F:	drivers/iio/humidity/hts221*
 
 HUAWEI ETHERNET DRIVER
-M:	Bin Luo <luobin9@huawei.com>
 L:	netdev@vger.kernel.org
-S:	Supported
+S:	Orphan
 F:	Documentation/networking/device_drivers/ethernet/huawei/hinic.rst
 F:	drivers/net/ethernet/huawei/hinic/
 
@@ -9302,7 +9308,7 @@ S:	Maintained
 F:	drivers/platform/x86/intel/atomisp2/led.c
 
 INTEL BIOS SAR INT1092 DRIVER
-M:	Shravan S <s.shravan@intel.com>
+M:	Shravan Sudhakar <s.shravan@intel.com>
 M:	Intel Corporation <linuxwwan@intel.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
@@ -9624,7 +9630,7 @@ F:	include/uapi/linux/isst_if.h
 F:	tools/power/x86/intel-speed-select/
 
 INTEL STRATIX10 FIRMWARE DRIVERS
-M:	Richard Gong <richard.gong@linux.intel.com>
+M:	Dinh Nguyen <dinguyen@kernel.org>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
@@ -10194,8 +10200,8 @@ M:	Hyunchul Lee <hyc.lee@gmail.com>
 L:	linux-cifs@vger.kernel.org
 S:	Maintained
 T:	git git://git.samba.org/ksmbd.git
-F:	fs/cifs_common/
 F:	fs/ksmbd/
+F:	fs/smbfs_common/
 
 KERNEL UNIT TESTING FRAMEWORK (KUnit)
 M:	Brendan Higgins <brendanhiggins@google.com>
@@ -10274,7 +10280,6 @@ KERNEL VIRTUAL MACHINE for s390 (KVM/s390)
 M:	Christian Borntraeger <borntraeger@de.ibm.com>
 M:	Janosch Frank <frankja@linux.ibm.com>
 R:	David Hildenbrand <david@redhat.com>
-R:	Cornelia Huck <cohuck@redhat.com>
 R:	Claudio Imbrenda <imbrenda@linux.ibm.com>
 L:	kvm@vger.kernel.org
 S:	Supported
@@ -11148,6 +11153,7 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/net/dsa/marvell.txt
 F:	Documentation/networking/devlink/mv88e6xxx.rst
 F:	drivers/net/dsa/mv88e6xxx/
+F:	include/linux/dsa/mv88e6xxx.h
 F:	include/linux/platform_data/mv88e6xxx.h
 
 MARVELL ARMADA 3700 PHY DRIVERS
@@ -11367,7 +11373,7 @@ F:	Documentation/devicetree/bindings/iio/proximity/maxbotix,mb1232.yaml
 F:	drivers/iio/proximity/mb1232.c
 
 MAXIM MAX77650 PMIC MFD DRIVER
-M:	Bartosz Golaszewski <bgolaszewski@baylibre.com>
+M:	Bartosz Golaszewski <brgl@bgdev.pl>
 L:	linux-kernel@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/*/*max77650.yaml
@@ -13255,9 +13261,9 @@ F:	Documentation/scsi/NinjaSCSI.rst
 F:	drivers/scsi/nsp32*
 
 NIOS2 ARCHITECTURE
-M:	Ley Foon Tan <ley.foon.tan@intel.com>
+M:	Dinh Nguyen <dinguyen@kernel.org>
 S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git
 F:	arch/nios2/
 
 NITRO ENCLAVES (NE)
@@ -16296,6 +16302,7 @@ S390
 M:	Heiko Carstens <hca@linux.ibm.com>
 M:	Vasily Gorbik <gor@linux.ibm.com>
 M:	Christian Borntraeger <borntraeger@de.ibm.com>
+R:	Alexander Gordeev <agordeev@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 S:	Supported
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -16374,7 +16381,6 @@ F:	drivers/s390/crypto/vfio_ap_ops.c
 F:	drivers/s390/crypto/vfio_ap_private.h
 
 S390 VFIO-CCW DRIVER
-M:	Cornelia Huck <cohuck@redhat.com>
 M:	Eric Farman <farman@linux.ibm.com>
 M:	Matthew Rosato <mjrosato@linux.ibm.com>
 R:	Halil Pasic <pasic@linux.ibm.com>
@@ -16651,13 +16657,6 @@ M:	Lubomir Rintel <lkundrak@v3.sk>
 S:	Supported
 F:	drivers/char/pcmcia/scr24x_cs.c
 
-SCSI CDROM DRIVER
-M:	Jens Axboe <axboe@kernel.dk>
-L:	linux-scsi@vger.kernel.org
-S:	Maintained
-W:	http://www.kernel.dk
-F:	drivers/scsi/sr*
-
 SCSI RDMA PROTOCOL (SRP) INITIATOR
 M:	Bart Van Assche <bvanassche@acm.org>
 L:	linux-rdma@vger.kernel.org
@@ -16956,7 +16955,6 @@ F:	drivers/misc/sgi-xp/
 
 SHARED MEMORY COMMUNICATIONS (SMC) SOCKETS
 M:	Karsten Graul <kgraul@linux.ibm.com>
-M:	Guvenc Gulce <guvenc@linux.ibm.com>
 L:	linux-s390@vger.kernel.org
 S:	Supported
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -17801,7 +17799,6 @@ F:	drivers/staging/nvec/
 
 STAGING - OLPC SECONDARY DISPLAY CONTROLLER (DCON)
 M:	Jens Frederich <jfrederich@gmail.com>
-M:	Daniel Drake <dsd@laptop.org>
 M:	Jon Nettleton <jon.nettleton@gmail.com>
 S:	Maintained
 W:	http://wiki.laptop.org/go/DCON
@@ -17892,7 +17889,8 @@ M:	Olivier Moysan <olivier.moysan@foss.st.com>
 M:	Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Maintained
-F:	Documentation/devicetree/bindings/iio/adc/st,stm32-*.yaml
+F:	Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
+F:	Documentation/devicetree/bindings/sound/st,stm32-*.yaml
 F:	sound/soc/stm/
 
 STM32 TIMER/LPTIMER DRIVERS
@@ -17969,10 +17967,11 @@ F:	Documentation/admin-guide/svga.rst
 F:	arch/x86/boot/video*
 
 SWIOTLB SUBSYSTEM
-M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+M:	Christoph Hellwig <hch@infradead.org>
 L:	iommu@lists.linux-foundation.org
 S:	Supported
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb.git
+W:	http://git.infradead.org/users/hch/dma-mapping.git
+T:	git git://git.infradead.org/users/hch/dma-mapping.git
 F:	arch/*/kernel/pci-swiotlb.c
 F:	include/linux/swiotlb.h
 F:	kernel/dma/swiotlb.c
@@ -17988,7 +17987,7 @@ F:	net/switchdev/
 SY8106A REGULATOR DRIVER
 M:	Icenowy Zheng <icenowy@aosc.io>
 S:	Maintained
-F:	Documentation/devicetree/bindings/regulator/sy8106a-regulator.txt
+F:	Documentation/devicetree/bindings/regulator/silergy,sy8106a.yaml
 F:	drivers/regulator/sy8106a-regulator.c
 
 SYNC FILE FRAMEWORK
@@ -18555,13 +18554,14 @@ T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/radio/radio-raremono.c
 
 THERMAL
-M:	Zhang Rui <rui.zhang@intel.com>
+M:	Rafael J. Wysocki <rafael@kernel.org>
 M:	Daniel Lezcano <daniel.lezcano@linaro.org>
 R:	Amit Kucheria <amitk@kernel.org>
+R:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-pm@vger.kernel.org
 S:	Supported
 Q:	https://patchwork.kernel.org/project/linux-pm/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git thermal
 F:	Documentation/devicetree/bindings/thermal/
 F:	drivers/thermal/
 F:	include/linux/cpu_cooling.h
@@ -18690,7 +18690,7 @@ F:	include/linux/clk/ti.h
 
 TI DAVINCI MACHINE SUPPORT
 M:	Sekhar Nori <nsekhar@ti.com>
-R:	Bartosz Golaszewski <bgolaszewski@baylibre.com>
+R:	Bartosz Golaszewski <brgl@bgdev.pl>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci.git
@@ -19289,13 +19289,12 @@ S:	Maintained
 F:	drivers/usb/misc/chaoskey.c
 
 USB CYPRESS C67X00 DRIVER
-M:	Peter Korsgaard <jacmet@sunsite.dk>
 L:	linux-usb@vger.kernel.org
-S:	Maintained
+S:	Orphan
 F:	drivers/usb/c67x00/
 
 USB DAVICOM DM9601 DRIVER
-M:	Peter Korsgaard <jacmet@sunsite.dk>
+M:	Peter Korsgaard <peter@korsgaard.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 W:	http://www.linux-usb.org/usbnet
@@ -20337,6 +20336,7 @@ X86 ARCHITECTURE (32-BIT AND 64-BIT)
 M:	Thomas Gleixner <tglx@linutronix.de>
 M:	Ingo Molnar <mingo@redhat.com>
 M:	Borislav Petkov <bp@alien8.de>
+M:	Dave Hansen <dave.hansen@linux.intel.com>
 M:	x86@kernel.org
 R:	"H. Peter Anvin" <hpa@zytor.com>
 L:	linux-kernel@vger.kernel.org
@@ -20475,7 +20475,6 @@ F:	samples/bpf/xdpsock*
 F:	tools/lib/bpf/xsk*
 
 XEN BLOCK SUBSYSTEM
-M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
 M:	Roger Pau Monné <roger.pau@citrix.com>
 L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
 S:	Supported
@@ -20523,7 +20522,7 @@ S:	Supported
 F:	drivers/net/xen-netback/*
 
 XEN PCI SUBSYSTEM
-M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+M:	Juergen Gross <jgross@suse.com>
 L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
 S:	Supported
 F:	arch/x86/pci/*xen*
@@ -20546,7 +20545,8 @@ S:	Supported
 F:	sound/xen/*
 
 XEN SWIOTLB SUBSYSTEM
-M:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+M:	Juergen Gross <jgross@suse.com>
+M:	Stefano Stabellini <sstabellini@kernel.org>
 L:	xen-devel@lists.xenproject.org (moderated for non-subscribers)
 L:	iommu@lists.linux-foundation.org
 S:	Supported
@@ -20705,7 +20705,6 @@ S:	Maintained
 F:	mm/zbud.c
 
 ZD1211RW WIRELESS DRIVER
-M:	Daniel Drake <dsd@gentoo.org>
 M:	Ulrich Kunitz <kune@deine-taler.de>
 L:	linux-wireless@vger.kernel.org
 L:	zd1211-devs@lists.sourceforge.net (subscribers-only)

Makefile

@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 15
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc7
 NAME = Opossums on Parade
 
 # *DOCUMENTATION*

arch/arc/include/asm/pgtable.h

@@ -26,11 +26,6 @@ extern char empty_zero_page[PAGE_SIZE];
 
 extern pgd_t swapper_pg_dir[] __aligned(PAGE_SIZE);
 
-/* Macro to mark a page protection as uncacheable */
-#define pgprot_noncached(prot)	(__pgprot(pgprot_val(prot) & ~_PAGE_CACHEABLE))
-
-extern pgd_t swapper_pg_dir[] __aligned(PAGE_SIZE);
-
 /* to cope with aliasing VIPT cache */
 #define HAVE_ARCH_UNMAPPED_AREA
 

arch/arm/Kconfig

@@ -92,6 +92,7 @@ config ARM
 	select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL
 	select HAVE_FUNCTION_GRAPH_TRACER if !THUMB2_KERNEL && !CC_IS_CLANG
 	select HAVE_FUNCTION_TRACER if !XIP_KERNEL
+	select HAVE_FUTEX_CMPXCHG if FUTEX
 	select HAVE_GCC_PLUGINS
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)
 	select HAVE_IRQ_TIME_ACCOUNTING
@@ -1989,8 +1990,6 @@ config ARCH_HIBERNATION_POSSIBLE
 
 endmenu
 
-source "drivers/firmware/Kconfig"
-
 if CRYPTO
 source "arch/arm/crypto/Kconfig"
 endif

arch/arm/boot/compressed/decompress.c

@@ -47,7 +47,10 @@ extern char * strchrnul(const char *, int);
 #endif
 
 #ifdef CONFIG_KERNEL_XZ
+/* Prevent KASAN override of string helpers in decompressor */
+#undef memmove
 #define memmove memmove
+#undef memcpy
 #define memcpy memcpy
 #include "../../../../lib/decompress_unxz.c"
 #endif

arch/arm/boot/dts/at91-sama5d27_som1_ek.dts

@@ -71,7 +71,6 @@
 			isc: isc@f0008000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_12>;
-				status = "okay";
 			};
 
 			qspi1: spi@f0024000 {

arch/arm/boot/dts/at91-sama7g5ek.dts

@@ -196,11 +196,13 @@
 
 					regulator-state-standby {
 						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
 						regulator-mode = <4>;
 					};
 
 					regulator-state-mem {
 						regulator-on-in-suspend;
+						regulator-suspend-microvolt = <1350000>;
 						regulator-mode = <4>;
 					};
 				};
@@ -353,7 +355,10 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gmac0_default &pinctrl_gmac0_txck_default &pinctrl_gmac0_phy_irq>;
+	pinctrl-0 = <&pinctrl_gmac0_default
+		     &pinctrl_gmac0_mdio_default
+		     &pinctrl_gmac0_txck_default
+		     &pinctrl_gmac0_phy_irq>;
 	phy-mode = "rgmii-id";
 	status = "okay";
 
@@ -368,7 +373,9 @@
 	#address-cells = <1>;
 	#size-cells = <0>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gmac1_default &pinctrl_gmac1_phy_irq>;
+	pinctrl-0 = <&pinctrl_gmac1_default
+		     &pinctrl_gmac1_mdio_default
+		     &pinctrl_gmac1_phy_irq>;
 	phy-mode = "rmii";
 	status = "okay";
 
@@ -423,14 +430,20 @@
 			 <PIN_PA15__G0_TXEN>,
 			 <PIN_PA30__G0_RXCK>,
 			 <PIN_PA18__G0_RXDV>,
-			 <PIN_PA22__G0_MDC>,
-			 <PIN_PA23__G0_MDIO>,
 			 <PIN_PA25__G0_125CK>;
+		slew-rate = <0>;
+		bias-disable;
+	};
+
+	pinctrl_gmac0_mdio_default: gmac0_mdio_default {
+		pinmux = <PIN_PA22__G0_MDC>,
+			 <PIN_PA23__G0_MDIO>;
 		bias-disable;
 	};
 
 	pinctrl_gmac0_txck_default: gmac0_txck_default {
 		pinmux = <PIN_PA24__G0_TXCK>;
+		slew-rate = <0>;
 		bias-pull-up;
 	};
 
@@ -447,8 +460,13 @@
 			 <PIN_PD25__G1_RX0>,
 			 <PIN_PD26__G1_RX1>,
 			 <PIN_PD27__G1_RXER>,
-			 <PIN_PD24__G1_RXDV>,
-			 <PIN_PD28__G1_MDC>,
+			 <PIN_PD24__G1_RXDV>;
+		slew-rate = <0>;
+		bias-disable;
+	};
+
+	pinctrl_gmac1_mdio_default: gmac1_mdio_default {
+		pinmux = <PIN_PD28__G1_MDC>,
 			 <PIN_PD29__G1_MDIO>;
 		bias-disable;
 	};
@@ -540,6 +558,7 @@
 				 <PIN_PA8__SDMMC0_DAT5>,
 				 <PIN_PA9__SDMMC0_DAT6>,
 				 <PIN_PA10__SDMMC0_DAT7>;
+			slew-rate = <0>;
 			bias-pull-up;
 		};
 
@@ -547,6 +566,7 @@
 			pinmux = <PIN_PA0__SDMMC0_CK>,
 				 <PIN_PA2__SDMMC0_RSTN>,
 				 <PIN_PA11__SDMMC0_DS>;
+			slew-rate = <0>;
 			bias-pull-up;
 		};
 	};
@@ -558,6 +578,7 @@
 				 <PIN_PC0__SDMMC1_DAT1>,
 				 <PIN_PC1__SDMMC1_DAT2>,
 				 <PIN_PC2__SDMMC1_DAT3>;
+			slew-rate = <0>;
 			bias-pull-up;
 		};
 
@@ -566,6 +587,7 @@
 				 <PIN_PB28__SDMMC1_RSTN>,
 				 <PIN_PC5__SDMMC1_1V8SEL>,
 				 <PIN_PC4__SDMMC1_CD>;
+			slew-rate = <0>;
 			bias-pull-up;
 		};
 	};
@@ -577,11 +599,13 @@
 				 <PIN_PD6__SDMMC2_DAT1>,
 				 <PIN_PD7__SDMMC2_DAT2>,
 				 <PIN_PD8__SDMMC2_DAT3>;
+			slew-rate = <0>;
 			bias-pull-up;
 		};
 
 		ck {
 			pinmux = <PIN_PD4__SDMMC2_CK>;
+			slew-rate = <0>;
 			bias-pull-up;
 		};
 	};
@@ -634,6 +658,15 @@
 	pinctrl-0 = <&pinctrl_sdmmc2_default>;
 };
 
+&shdwc {
+	atmel,shdwc-debouncer = <976>;
+	status = "okay";
+
+	input@0 {
+		reg = <0>;
+	};
+};
+
 &spdifrx {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_spdifrx_default>;

arch/arm/boot/dts/bcm2711-rpi-4-b.dts

@@ -40,8 +40,8 @@
 		regulator-always-on;
 		regulator-settling-time-us = <5000>;
 		gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x1
-			  3300000 0x0>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
 		status = "okay";
 	};
 
@@ -217,15 +217,16 @@
 };
 
 &pcie0 {
-	pci@1,0 {
+	pci@0,0 {
+		device_type = "pci";
 		#address-cells = <3>;
 		#size-cells = <2>;
 		ranges;
 
 		reg = <0 0 0 0 0>;
 
-		usb@1,0 {
-			reg = <0x10000 0 0 0 0>;
+		usb@0,0 {
+			reg = <0 0 0 0 0>;
 			resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
 		};
 	};

arch/arm/boot/dts/bcm2711.dtsi

@@ -300,6 +300,14 @@
 			status = "disabled";
 		};
 
+		vec: vec@7ec13000 {
+			compatible = "brcm,bcm2711-vec";
+			reg = <0x7ec13000 0x1000>;
+			clocks = <&clocks BCM2835_CLOCK_VEC>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		dvp: clock@7ef00000 {
 			compatible = "brcm,brcm2711-dvp";
 			reg = <0x7ef00000 0x10>;
@@ -532,8 +540,8 @@
 				compatible = "brcm,genet-mdio-v5";
 				reg = <0xe14 0x8>;
 				reg-names = "mdio";
-				#address-cells = <0x0>;
-				#size-cells = <0x1>;
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
 			};
 		};
 	};

arch/arm/boot/dts/bcm2835-common.dtsi

@@ -106,6 +106,14 @@
 			status = "okay";
 		};
 
+		vec: vec@7e806000 {
+			compatible = "brcm,bcm2835-vec";
+			reg = <0x7e806000 0x1000>;
+			clocks = <&clocks BCM2835_CLOCK_VEC>;
+			interrupts = <2 27>;
+			status = "disabled";
+		};
+
 		pixelvalve@7e807000 {
 			compatible = "brcm,bcm2835-pixelvalve2";
 			reg = <0x7e807000 0x100>;

arch/arm/boot/dts/bcm283x.dtsi

@@ -464,14 +464,6 @@
 			status = "disabled";
 		};
 
-		vec: vec@7e806000 {
-			compatible = "brcm,bcm2835-vec";
-			reg = <0x7e806000 0x1000>;
-			clocks = <&clocks BCM2835_CLOCK_VEC>;
-			interrupts = <2 27>;
-			status = "disabled";
-		};
-
 		usb: usb@7e980000 {
 			compatible = "brcm,bcm2835-usb";
 			reg = <0x7e980000 0x10000>;

arch/arm/boot/dts/imx53-m53menlo.dts

@@ -56,6 +56,7 @@
 	panel {
 		compatible = "edt,etm0700g0dh6";
 		pinctrl-0 = <&pinctrl_display_gpio>;
+		pinctrl-names = "default";
 		enable-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
 
 		port {
@@ -76,8 +77,7 @@
 		regulator-name = "vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
+		gpio = <&gpio1 2 0>;
 	};
 };
 

arch/arm/boot/dts/imx6dl-yapp4-common.dtsi

@@ -5,6 +5,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/pwm/pwm.h>
 
 / {
@@ -277,6 +278,7 @@
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
 			reg = <0>;
+			color = <LED_COLOR_ID_RED>;
 		};
 
 		chan@1 {
@@ -284,6 +286,7 @@
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
 			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
 		};
 
 		chan@2 {
@@ -291,6 +294,7 @@
 			led-cur = /bits/ 8 <0x20>;
 			max-cur = /bits/ 8 <0x60>;
 			reg = <2>;
+			color = <LED_COLOR_ID_BLUE>;
 		};
 
 		chan@3 {
@@ -298,6 +302,7 @@
 			led-cur = /bits/ 8 <0x0>;
 			max-cur = /bits/ 8 <0x0>;
 			reg = <3>;
+			color = <LED_COLOR_ID_WHITE>;
 		};
 	};
 

arch/arm/boot/dts/imx6qdl-pico.dtsi

@@ -176,7 +176,18 @@
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
 	phy-reset-gpios = <&gpio1 26 GPIO_ACTIVE_LOW>;
+	phy-handle = <&phy>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@1 {
+			reg = <1>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
 };
 
 &hdmi {

arch/arm/boot/dts/imx6sx-sdb.dts

@@ -114,7 +114,7 @@
 		compatible = "micron,n25q256a", "jedec,spi-nor";
 		spi-max-frequency = <29000000>;
 		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
 		reg = <0>;
 	};
 
@@ -124,7 +124,7 @@
 		compatible = "micron,n25q256a", "jedec,spi-nor";
 		spi-max-frequency = <29000000>;
 		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
 		reg = <2>;
 	};
 };

arch/arm/boot/dts/imx6ul-14x14-evk.dtsi

@@ -292,7 +292,7 @@
 		compatible = "micron,n25q256a", "jedec,spi-nor";
 		spi-max-frequency = <29000000>;
 		spi-rx-bus-width = <4>;
-		spi-tx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
 		reg = <0>;
 	};
 };

arch/arm/boot/dts/omap3430-sdp.dts

@@ -101,7 +101,7 @@
 
 	nand@1,0 {
 		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+		reg = <1 0 4>; /* CS1, offset 0, IO size 4 */
 		interrupt-parent = <&gpmc>;
 		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
 			     <1 IRQ_TYPE_NONE>;	/* termcount */

arch/arm/boot/dts/qcom-apq8064.dtsi

@@ -198,7 +198,7 @@
 			clock-frequency = <19200000>;
 		};
 
-		pxo_board {
+		pxo_board: pxo_board {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 			clock-frequency = <27000000>;
@@ -1148,22 +1148,21 @@
 		};
 
 		gpu: adreno-3xx@4300000 {
-			compatible = "qcom,adreno-3xx";
+			compatible = "qcom,adreno-320.2", "qcom,adreno";
 			reg = <0x04300000 0x20000>;
 			reg-names = "kgsl_3d0_reg_memory";
 			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "kgsl_3d0_irq";
 			clock-names =
-			    "core_clk",
-			    "iface_clk",
-			    "mem_clk",
-			    "mem_iface_clk";
+			    "core",
+			    "iface",
+			    "mem",
+			    "mem_iface";
 			clocks =
 			    <&mmcc GFX3D_CLK>,
 			    <&mmcc GFX3D_AHB_CLK>,
 			    <&mmcc GFX3D_AXI_CLK>,
 			    <&mmcc MMSS_IMEM_AHB_CLK>;
-			qcom,chipid = <0x03020002>;
 
 			iommus = <&gfx3d 0
 				  &gfx3d 1
@@ -1306,7 +1305,7 @@
 			reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
 			clock-names = "iface_clk", "ref";
 			clocks = <&mmcc DSI_M_AHB_CLK>,
-				 <&cxo_board>;
+				 <&pxo_board>;
 		};
 
 

arch/arm/boot/dts/sama7g5.dtsi

@@ -75,6 +75,17 @@
 		#size-cells = <1>;
 		ranges;
 
+		securam: securam@e0000000 {
+			compatible = "microchip,sama7g5-securam", "atmel,sama5d2-securam", "mmio-sram";
+			reg = <0xe0000000 0x4000>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xe0000000 0x4000>;
+			no-memory-wc;
+			status = "okay";
+		};
+
 		secumod: secumod@e0004000 {
 			compatible = "microchip,sama7g5-secumod", "atmel,sama5d2-secumod", "syscon";
 			reg = <0xe0004000 0x4000>;
@@ -111,6 +122,17 @@
 			clock-names = "td_slck", "md_slck", "main_xtal";
 		};
 
+		shdwc: shdwc@e001d010 {
+			compatible = "microchip,sama7g5-shdwc", "syscon";
+			reg = <0xe001d010 0x10>;
+			clocks = <&clk32k 0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			atmel,wakeup-rtc-timer;
+			atmel,wakeup-rtt-timer;
+			status = "disabled";
+		};
+
 		rtt: rtt@e001d020 {
 			compatible = "microchip,sama7g5-rtt", "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
 			reg = <0xe001d020 0x30>;
@@ -137,6 +159,11 @@
 			clocks = <&clk32k 0>;
 		};
 
+		chipid@e0020000 {
+			compatible = "microchip,sama7g5-chipid";
+			reg = <0xe0020000 0x8>;
+		};
+
 		sdmmc0: mmc@e1204000 {
 			compatible = "microchip,sama7g5-sdhci", "microchip,sam9x60-sdhci";
 			reg = <0xe1204000 0x4000>;
@@ -515,6 +542,18 @@
 			};
 		};
 
+		uddrc: uddrc@e3800000 {
+			compatible = "microchip,sama7g5-uddrc";
+			reg = <0xe3800000 0x4000>;
+			status = "okay";
+		};
+
+		ddr3phy: ddr3phy@e3804000 {
+			compatible = "microchip,sama7g5-ddr3phy";
+			reg = <0xe3804000 0x1000>;
+			status = "okay";
+		};
+
 		gic: interrupt-controller@e8c11000 {
 			compatible = "arm,cortex-a7-gic";
 			#interrupt-cells = <3>;

arch/arm/boot/dts/spear3xx.dtsi

@@ -47,7 +47,7 @@
 		};
 
 		gmac: eth@e0800000 {
-			compatible = "st,spear600-gmac";
+			compatible = "snps,dwmac-3.40a";
 			reg = <0xe0800000 0x8000>;
 			interrupts = <23 22>;
 			interrupt-names = "macirq", "eth_wake_irq";

arch/arm/boot/dts/vexpress-v2m-rs1.dtsi

@@ -17,6 +17,7 @@
  * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
  * CHANGES TO vexpress-v2m.dtsi!
  */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
 	v2m_fixed_3v3: fixed-regulator-0 {
@@ -101,16 +102,68 @@
 	};
 
 	bus@8000000 {
-		motherboard-bus {
-			model = "V2M-P1";
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 63>;
+		interrupt-map = <0  0 &gic GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
+				<0  1 &gic GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
+				<0  2 &gic GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
+				<0  3 &gic GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
+				<0  4 &gic GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
+				<0  5 &gic GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
+				<0  6 &gic GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
+				<0  7 &gic GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
+				<0  8 &gic GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+				<0  9 &gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+				<0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				<0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				<0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				<0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				<0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				<0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				<0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				<0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				<0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				<0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				<0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				<0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				<0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				<0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				<0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				<0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				<0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				<0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				<0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				<0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				<0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				<0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				<0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				<0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				<0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				<0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				<0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				<0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+
+		motherboard-bus@8000000 {
 			arm,hbi = <0x190>;
 			arm,vexpress,site = <0>;
-			arm,v2m-memory-map = "rs1";
 			compatible = "arm,vexpress,v2m-p1", "simple-bus";
 			#address-cells = <2>; /* SMB chipselect number and offset */
 			#size-cells = <1>;
-			#interrupt-cells = <1>;
-			ranges;
+			ranges = <0 0 0x08000000 0x04000000>,
+				 <1 0 0x14000000 0x04000000>,
+				 <2 0 0x18000000 0x04000000>,
+				 <3 0 0x1c000000 0x04000000>,
+				 <4 0 0x0c000000 0x04000000>,
+				 <5 0 0x10000000 0x04000000>;
 
 			nor_flash: flash@0 {
 				compatible = "arm,vexpress-flash", "cfi-flash";
@@ -215,7 +268,7 @@
 					clock-names = "apb_pclk";
 				};
 
-				mmci@50000 {
+				mmc@50000 {
 					compatible = "arm,pl180", "arm,primecell";
 					reg = <0x050000 0x1000>;
 					interrupts = <9>, <10>;
@@ -275,7 +328,7 @@
 					clock-names = "uartclk", "apb_pclk";
 				};
 
-				wdt@f0000 {
+				watchdog@f0000 {
 					compatible = "arm,sp805", "arm,primecell";
 					reg = <0x0f0000 0x1000>;
 					interrupts = <0>;

arch/arm/boot/dts/vexpress-v2m.dtsi

@@ -17,18 +17,73 @@
  * TAKE CARE WHEN MAINTAINING THIS FILE TO PROPAGATE ANY RELEVANT
  * CHANGES TO vexpress-v2m-rs1.dtsi!
  */
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 
 / {
-	bus@4000000 {
-		motherboard {
-			model = "V2M-P1";
+	bus@40000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x40000000 0x40000000 0x10000000>,
+			 <0x10000000 0x10000000 0x00020000>;
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 63>;
+		interrupt-map = <0  0 &gic GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
+				<0  1 &gic GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
+				<0  2 &gic GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
+				<0  3 &gic GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
+				<0  4 &gic GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
+				<0  5 &gic GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
+				<0  6 &gic GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
+				<0  7 &gic GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
+				<0  8 &gic GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
+				<0  9 &gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
+				<0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				<0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+				<0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+				<0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
+				<0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
+				<0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+				<0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
+				<0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
+				<0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+				<0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
+				<0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
+				<0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+				<0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+				<0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
+				<0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
+				<0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
+				<0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+				<0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
+				<0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
+				<0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
+				<0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+				<0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				<0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
+				<0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
+				<0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
+				<0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+				<0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+				<0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+				<0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+				<0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+				<0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+				<0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+				<0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+
+		motherboard-bus@40000000 {
 			arm,hbi = <0x190>;
 			arm,vexpress,site = <0>;
 			compatible = "arm,vexpress,v2m-p1", "simple-bus";
 			#address-cells = <2>; /* SMB chipselect number and offset */
 			#size-cells = <1>;
-			#interrupt-cells = <1>;
-			ranges;
+			ranges = <0 0 0x40000000 0x04000000>,
+				 <1 0 0x44000000 0x04000000>,
+				 <2 0 0x48000000 0x04000000>,
+				 <3 0 0x4c000000 0x04000000>,
+				 <7 0 0x10000000 0x00020000>;
 
 			flash@0,00000000 {
 				compatible = "arm,vexpress-flash", "cfi-flash";

arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts

@@ -237,62 +237,7 @@
 	};
 
 	bus@8000000 {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0x08000000 0x04000000>,
-			 <1 0 0 0x14000000 0x04000000>,
-			 <2 0 0 0x18000000 0x04000000>,
-			 <3 0 0 0x1c000000 0x04000000>,
-			 <4 0 0 0x0c000000 0x04000000>,
-			 <5 0 0 0x10000000 0x04000000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
+		ranges = <0x8000000 0 0x8000000 0x18000000>;
 	};
 
 	site2: hsb@40000000 {

arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts

@@ -609,62 +609,7 @@
 	};
 
 	smb: bus@8000000 {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0x08000000 0x04000000>,
-			 <1 0 0 0x14000000 0x04000000>,
-			 <2 0 0 0x18000000 0x04000000>,
-			 <3 0 0 0x1c000000 0x04000000>,
-			 <4 0 0 0x0c000000 0x04000000>,
-			 <5 0 0 0x10000000 0x04000000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
+		ranges = <0x8000000 0 0x8000000 0x18000000>;
 	};
 
 	site2: hsb@40000000 {

arch/arm/boot/dts/vexpress-v2p-ca5s.dts

@@ -207,62 +207,7 @@
 	};
 
 	smb: bus@8000000 {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0x08000000 0x04000000>,
-			 <1 0 0x14000000 0x04000000>,
-			 <2 0 0x18000000 0x04000000>,
-			 <3 0 0x1c000000 0x04000000>,
-			 <4 0 0x0c000000 0x04000000>,
-			 <5 0 0x10000000 0x04000000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
+		ranges = <0 0x8000000 0x18000000>;
 	};
 
 	site2: hsb@40000000 {

arch/arm/boot/dts/vexpress-v2p-ca9.dts

@@ -295,64 +295,6 @@
 		};
 	};
 
-	smb: bus@4000000 {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0x40000000 0x04000000>,
-			 <1 0 0x44000000 0x04000000>,
-			 <2 0 0x48000000 0x04000000>,
-			 <3 0 0x4c000000 0x04000000>,
-			 <7 0 0x10000000 0x00020000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic 0  0 4>,
-				<0 0  1 &gic 0  1 4>,
-				<0 0  2 &gic 0  2 4>,
-				<0 0  3 &gic 0  3 4>,
-				<0 0  4 &gic 0  4 4>,
-				<0 0  5 &gic 0  5 4>,
-				<0 0  6 &gic 0  6 4>,
-				<0 0  7 &gic 0  7 4>,
-				<0 0  8 &gic 0  8 4>,
-				<0 0  9 &gic 0  9 4>,
-				<0 0 10 &gic 0 10 4>,
-				<0 0 11 &gic 0 11 4>,
-				<0 0 12 &gic 0 12 4>,
-				<0 0 13 &gic 0 13 4>,
-				<0 0 14 &gic 0 14 4>,
-				<0 0 15 &gic 0 15 4>,
-				<0 0 16 &gic 0 16 4>,
-				<0 0 17 &gic 0 17 4>,
-				<0 0 18 &gic 0 18 4>,
-				<0 0 19 &gic 0 19 4>,
-				<0 0 20 &gic 0 20 4>,
-				<0 0 21 &gic 0 21 4>,
-				<0 0 22 &gic 0 22 4>,
-				<0 0 23 &gic 0 23 4>,
-				<0 0 24 &gic 0 24 4>,
-				<0 0 25 &gic 0 25 4>,
-				<0 0 26 &gic 0 26 4>,
-				<0 0 27 &gic 0 27 4>,
-				<0 0 28 &gic 0 28 4>,
-				<0 0 29 &gic 0 29 4>,
-				<0 0 30 &gic 0 30 4>,
-				<0 0 31 &gic 0 31 4>,
-				<0 0 32 &gic 0 32 4>,
-				<0 0 33 &gic 0 33 4>,
-				<0 0 34 &gic 0 34 4>,
-				<0 0 35 &gic 0 35 4>,
-				<0 0 36 &gic 0 36 4>,
-				<0 0 37 &gic 0 37 4>,
-				<0 0 38 &gic 0 38 4>,
-				<0 0 39 &gic 0 39 4>,
-				<0 0 40 &gic 0 40 4>,
-				<0 0 41 &gic 0 41 4>,
-				<0 0 42 &gic 0 42 4>;
-	};
-
 	site2: hsb@e0000000 {
 		compatible = "simple-bus";
 		#address-cells = <1>;

arch/arm/common/sharpsl_param.c

@@ -40,7 +40,9 @@ EXPORT_SYMBOL(sharpsl_param);
 
 void sharpsl_save_param(void)
 {
-	memcpy(&sharpsl_param, param_start(PARAM_BASE), sizeof(struct sharpsl_param_info));
+	struct sharpsl_param_info *params = param_start(PARAM_BASE);
+
+	memcpy(&sharpsl_param, params, sizeof(*params));
 
 	if (sharpsl_param.comadj_keyword != COMADJ_MAGIC)
 		sharpsl_param.comadj=-1;

arch/arm/configs/gemini_defconfig

@@ -76,6 +76,7 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_ILITEK_IL9322=y
 CONFIG_DRM_TVE200=y
+CONFIG_FB=y
 CONFIG_LOGO=y
 CONFIG_USB=y
 CONFIG_USB_MON=y

arch/arm/configs/imx_v6_v7_defconfig

@@ -292,6 +292,7 @@ CONFIG_DRM_IMX_LDB=y
 CONFIG_DRM_IMX_HDMI=y
 CONFIG_DRM_ETNAVIV=y
 CONFIG_DRM_MXSFB=y
+CONFIG_FB=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_LCD_CLASS_DEVICE=y
 CONFIG_LCD_L4F00242T03=y

arch/arm/configs/multi_v7_defconfig

@@ -197,7 +197,6 @@ CONFIG_PCI_EPF_TEST=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_OMAP_OCP2SCP=y
-CONFIG_SIMPLE_PM_BUS=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
@@ -456,6 +455,7 @@ CONFIG_PINCTRL_STMFX=y
 CONFIG_PINCTRL_PALMAS=y
 CONFIG_PINCTRL_OWL=y
 CONFIG_PINCTRL_S500=y
+CONFIG_PINCTRL_MSM=y
 CONFIG_PINCTRL_APQ8064=y
 CONFIG_PINCTRL_APQ8084=y
 CONFIG_PINCTRL_IPQ8064=y
@@ -725,6 +725,7 @@ CONFIG_DRM_PL111=m
 CONFIG_DRM_LIMA=m
 CONFIG_DRM_PANFROST=m
 CONFIG_DRM_ASPEED_GFX=m
+CONFIG_FB=y
 CONFIG_FB_EFI=y
 CONFIG_FB_WM8505=y
 CONFIG_FB_SH_MOBILE_LCDC=y
@@ -1122,6 +1123,7 @@ CONFIG_PHY_DM816X_USB=m
 CONFIG_OMAP_USB2=y
 CONFIG_TI_PIPE3=y
 CONFIG_TWL4030_USB=m
+CONFIG_RAS=y
 CONFIG_NVMEM_IMX_OCOTP=y
 CONFIG_ROCKCHIP_EFUSE=m
 CONFIG_NVMEM_SUNXI_SID=y

arch/arm/configs/oxnas_v6_defconfig

@@ -46,7 +46,6 @@ CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=64
-CONFIG_SIMPLE_PM_BUS=y
 CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y

arch/arm/configs/shmobile_defconfig

@@ -40,7 +40,6 @@ CONFIG_PCI_RCAR_GEN2=y
 CONFIG_PCIE_RCAR_HOST=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_SIMPLE_PM_BUS=y
 CONFIG_MTD=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y

arch/arm/include/asm/uaccess.h

@@ -176,6 +176,7 @@ extern int __get_user_64t_4(void *);
 		register unsigned long __l asm("r1") = __limit;		\
 		register int __e asm("r0");				\
 		unsigned int __ua_flags = uaccess_save_and_enable();	\
+		int __tmp_e;						\
 		switch (sizeof(*(__p))) {				\
 		case 1:							\
 			if (sizeof((x)) >= 8)				\
@@ -203,9 +204,10 @@ extern int __get_user_64t_4(void *);
 			break;						\
 		default: __e = __get_user_bad(); break;			\
 		}							\
+		__tmp_e = __e;						\
 		uaccess_restore(__ua_flags);				\
 		x = (typeof(*(p))) __r2;				\
-		__e;							\
+		__tmp_e;						\
 	})
 
 #define get_user(x, p)							\

arch/arm/kernel/head.S

@@ -253,7 +253,7 @@ __create_page_tables:
 	add	r0, r4, #KERNEL_OFFSET >> (SECTION_SHIFT - PMD_ORDER)
 	ldr	r6, =(_end - 1)
 	adr_l	r5, kernel_sec_start		@ _pa(kernel_sec_start)
-#ifdef CONFIG_CPU_ENDIAN_BE8
+#if defined CONFIG_CPU_ENDIAN_BE8 || defined CONFIG_CPU_ENDIAN_BE32
 	str	r8, [r5, #4]			@ Save physical start of kernel (BE)
 #else
 	str	r8, [r5]			@ Save physical start of kernel (LE)
@@ -266,7 +266,7 @@ __create_page_tables:
 	bls	1b
 	eor	r3, r3, r7			@ Remove the MMU flags
 	adr_l	r5, kernel_sec_end		@ _pa(kernel_sec_end)
-#ifdef CONFIG_CPU_ENDIAN_BE8
+#if defined CONFIG_CPU_ENDIAN_BE8 || defined CONFIG_CPU_ENDIAN_BE32
 	str	r3, [r5, #4]			@ Save physical end of kernel (BE)
 #else
 	str	r3, [r5]			@ Save physical end of kernel (LE)

arch/arm/kernel/signal.c

@@ -628,7 +628,6 @@ do_work_pending(struct pt_regs *regs, unsigned int thread_flags, int syscall)
 				uprobe_notify_resume(regs);
 			} else {
 				tracehook_notify_resume(regs);
-				rseq_handle_notify_resume(NULL, regs);
 			}
 		}
 		local_irq_disable();

arch/arm/kernel/traps.c

@@ -136,7 +136,7 @@ static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
 		for (p = first, i = 0; i < 8 && p < top; i++, p += 4) {
 			if (p >= bottom && p < top) {
 				unsigned long val;
-				if (get_kernel_nofault(val, (unsigned long *)p))
+				if (!get_kernel_nofault(val, (unsigned long *)p))
 					sprintf(str + i * 9, " %08lx", val);
 				else
 					sprintf(str + i * 9, " ????????");

arch/arm/kernel/vmlinux-xip.lds.S

@@ -40,6 +40,10 @@ SECTIONS
 		ARM_DISCARD
 		*(.alt.smp.init)
 		*(.pv_table)
+#ifndef CONFIG_ARM_UNWIND
+		*(.ARM.exidx) *(.ARM.exidx.*)
+		*(.ARM.extab) *(.ARM.extab.*)
+#endif
 	}
 
 	. = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR);
@@ -172,7 +176,7 @@ ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined")
 ASSERT((_end - __bss_start) >= 12288, ".bss too small for CONFIG_XIP_DEFLATED_DATA")
 #endif
 
-#ifdef CONFIG_ARM_MPU
+#if defined(CONFIG_ARM_MPU) && !defined(CONFIG_COMPILE_TEST)
 /*
  * Due to PMSAv7 restriction on base address and size we have to
  * enforce minimal alignment restrictions. It was seen that weaker

arch/arm/mach-at91/pm.c

@@ -47,12 +47,26 @@ struct at91_pm_bu {
 	unsigned long ddr_phy_calibration[BACKUP_DDR_PHY_CALIBRATION];
 };
 
+/*
+ * struct at91_pm_sfrbu_offsets: registers mapping for SFRBU
+ * @pswbu: power switch BU control registers
+ */
+struct at91_pm_sfrbu_regs {
+	struct {
+		u32 key;
+		u32 ctrl;
+		u32 state;
+		u32 softsw;
+	} pswbu;
+};
+
 /**
  * struct at91_soc_pm - AT91 SoC power management data structure
  * @config_shdwc_ws: wakeup sources configuration function for SHDWC
  * @config_pmc_ws: wakeup srouces configuration function for PMC
  * @ws_ids: wakup sources of_device_id array
  * @data: PM data to be used on last phase of suspend
+ * @sfrbu_regs: SFRBU registers mapping
  * @bu: backup unit mapped data (for backup mode)
  * @memcs: memory chip select
  */
@@ -62,6 +76,7 @@ struct at91_soc_pm {
 	const struct of_device_id *ws_ids;
 	struct at91_pm_bu *bu;
 	struct at91_pm_data data;
+	struct at91_pm_sfrbu_regs sfrbu_regs;
 	void *memcs;
 };
 
@@ -356,9 +371,36 @@ static int at91_suspend_finish(unsigned long val)
 	return 0;
 }
 
+static void at91_pm_switch_ba_to_vbat(void)
+{
+	unsigned int offset = offsetof(struct at91_pm_sfrbu_regs, pswbu);
+	unsigned int val;
+
+	/* Just for safety. */
+	if (!soc_pm.data.sfrbu)
+		return;
+
+	val = readl(soc_pm.data.sfrbu + offset);
+
+	/* Already on VBAT. */
+	if (!(val & soc_pm.sfrbu_regs.pswbu.state))
+		return;
+
+	val &= ~soc_pm.sfrbu_regs.pswbu.softsw;
+	val |= soc_pm.sfrbu_regs.pswbu.key | soc_pm.sfrbu_regs.pswbu.ctrl;
+	writel(val, soc_pm.data.sfrbu + offset);
+
+	/* Wait for update. */
+	val = readl(soc_pm.data.sfrbu + offset);
+	while (val & soc_pm.sfrbu_regs.pswbu.state)
+		val = readl(soc_pm.data.sfrbu + offset);
+}
+
 static void at91_pm_suspend(suspend_state_t state)
 {
 	if (soc_pm.data.mode == AT91_PM_BACKUP) {
+		at91_pm_switch_ba_to_vbat();
+
 		cpu_suspend(0, at91_suspend_finish);
 
 		/* The SRAM is lost between suspend cycles */
@@ -589,18 +631,22 @@ static const struct of_device_id ramc_phy_ids[] __initconst = {
 	{ /* Sentinel. */ },
 };
 
-static __init void at91_dt_ramc(bool phy_mandatory)
+static __init int at91_dt_ramc(bool phy_mandatory)
 {
 	struct device_node *np;
 	const struct of_device_id *of_id;
 	int idx = 0;
 	void *standby = NULL;
 	const struct ramc_info *ramc;
+	int ret;
 
 	for_each_matching_node_and_match(np, ramc_ids, &of_id) {
 		soc_pm.data.ramc[idx] = of_iomap(np, 0);
-		if (!soc_pm.data.ramc[idx])
-			panic(pr_fmt("unable to map ramc[%d] cpu registers\n"), idx);
+		if (!soc_pm.data.ramc[idx]) {
+			pr_err("unable to map ramc[%d] cpu registers\n", idx);
+			ret = -ENOMEM;
+			goto unmap_ramc;
+		}
 
 		ramc = of_id->data;
 		if (ramc) {
@@ -612,25 +658,42 @@ static __init void at91_dt_ramc(bool phy_mandatory)
 		idx++;
 	}
 
-	if (!idx)
-		panic(pr_fmt("unable to find compatible ram controller node in dtb\n"));
+	if (!idx) {
+		pr_err("unable to find compatible ram controller node in dtb\n");
+		ret = -ENODEV;
+		goto unmap_ramc;
+	}
 
 	/* Lookup for DDR PHY node, if any. */
 	for_each_matching_node_and_match(np, ramc_phy_ids, &of_id) {
 		soc_pm.data.ramc_phy = of_iomap(np, 0);
-		if (!soc_pm.data.ramc_phy)
-			panic(pr_fmt("unable to map ramc phy cpu registers\n"));
+		if (!soc_pm.data.ramc_phy) {
+			pr_err("unable to map ramc phy cpu registers\n");
+			ret = -ENOMEM;
+			goto unmap_ramc;
+		}
 	}
 
-	if (phy_mandatory && !soc_pm.data.ramc_phy)
-		panic(pr_fmt("DDR PHY is mandatory!\n"));
+	if (phy_mandatory && !soc_pm.data.ramc_phy) {
+		pr_err("DDR PHY is mandatory!\n");
+		ret = -ENODEV;
+		goto unmap_ramc;
+	}
 
 	if (!standby) {
 		pr_warn("ramc no standby function available\n");
-		return;
+		return 0;
 	}
 
 	at91_cpuidle_device.dev.platform_data = standby;
+
+	return 0;
+
+unmap_ramc:
+	while (idx)
+		iounmap(soc_pm.data.ramc[--idx]);
+
+	return ret;
 }
 
 static void at91rm9200_idle(void)
@@ -1017,6 +1080,8 @@ static void __init at91_pm_init(void (*pm_idle)(void))
 
 void __init at91rm9200_pm_init(void)
 {
+	int ret;
+
 	if (!IS_ENABLED(CONFIG_SOC_AT91RM9200))
 		return;
 
@@ -1028,7 +1093,9 @@ void __init at91rm9200_pm_init(void)
 	soc_pm.data.standby_mode = AT91_PM_STANDBY;
 	soc_pm.data.suspend_mode = AT91_PM_ULP0;
 
-	at91_dt_ramc(false);
+	ret = at91_dt_ramc(false);
+	if (ret)
+		return;
 
 	/*
 	 * AT91RM9200 SDRAM low-power mode cannot be used with self-refresh.
@@ -1046,13 +1113,17 @@ void __init sam9x60_pm_init(void)
 	static const int iomaps[] __initconst = {
 		[AT91_PM_ULP1]		= AT91_PM_IOMAP(SHDWC),
 	};
+	int ret;
 
 	if (!IS_ENABLED(CONFIG_SOC_SAM9X60))
 		return;
 
 	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
 	at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
-	at91_dt_ramc(false);
+	ret = at91_dt_ramc(false);
+	if (ret)
+		return;
+
 	at91_pm_init(NULL);
 
 	soc_pm.ws_ids = sam9x60_ws_ids;
@@ -1061,6 +1132,8 @@ void __init sam9x60_pm_init(void)
 
 void __init at91sam9_pm_init(void)
 {
+	int ret;
+
 	if (!IS_ENABLED(CONFIG_SOC_AT91SAM9))
 		return;
 
@@ -1072,7 +1145,10 @@ void __init at91sam9_pm_init(void)
 	soc_pm.data.standby_mode = AT91_PM_STANDBY;
 	soc_pm.data.suspend_mode = AT91_PM_ULP0;
 
-	at91_dt_ramc(false);
+	ret = at91_dt_ramc(false);
+	if (ret)
+		return;
+
 	at91_pm_init(at91sam9_idle);
 }
 
@@ -1081,12 +1157,16 @@ void __init sama5_pm_init(void)
 	static const int modes[] __initconst = {
 		AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST,
 	};
+	int ret;
 
 	if (!IS_ENABLED(CONFIG_SOC_SAMA5))
 		return;
 
 	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
-	at91_dt_ramc(false);
+	ret = at91_dt_ramc(false);
+	if (ret)
+		return;
+
 	at91_pm_init(NULL);
 }
 
@@ -1101,18 +1181,27 @@ void __init sama5d2_pm_init(void)
 		[AT91_PM_BACKUP]	= AT91_PM_IOMAP(SHDWC) |
 					  AT91_PM_IOMAP(SFRBU),
 	};
+	int ret;
 
 	if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
 		return;
 
 	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
 	at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
-	at91_dt_ramc(false);
+	ret = at91_dt_ramc(false);
+	if (ret)
+		return;
+
 	at91_pm_init(NULL);
 
 	soc_pm.ws_ids = sama5d2_ws_ids;
 	soc_pm.config_shdwc_ws = at91_sama5d2_config_shdwc_ws;
 	soc_pm.config_pmc_ws = at91_sama5d2_config_pmc_ws;
+
+	soc_pm.sfrbu_regs.pswbu.key = (0x4BD20C << 8);
+	soc_pm.sfrbu_regs.pswbu.ctrl = BIT(0);
+	soc_pm.sfrbu_regs.pswbu.softsw = BIT(1);
+	soc_pm.sfrbu_regs.pswbu.state = BIT(3);
 }
 
 void __init sama7_pm_init(void)
@@ -1127,18 +1216,27 @@ void __init sama7_pm_init(void)
 		[AT91_PM_BACKUP]	= AT91_PM_IOMAP(SFRBU) |
 					  AT91_PM_IOMAP(SHDWC),
 	};
+	int ret;
 
 	if (!IS_ENABLED(CONFIG_SOC_SAMA7))
 		return;
 
 	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
 
-	at91_dt_ramc(true);
+	ret = at91_dt_ramc(true);
+	if (ret)
+		return;
+
 	at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
 	at91_pm_init(NULL);
 
 	soc_pm.ws_ids = sama7g5_ws_ids;
 	soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws;
+
+	soc_pm.sfrbu_regs.pswbu.key = (0x4BD20C << 8);
+	soc_pm.sfrbu_regs.pswbu.ctrl = BIT(0);
+	soc_pm.sfrbu_regs.pswbu.softsw = BIT(1);
+	soc_pm.sfrbu_regs.pswbu.state = BIT(2);
 }
 
 static int __init at91_pm_modes_select(char *str)

arch/arm/mach-at91/pm_suspend.S

@@ -1014,31 +1014,55 @@ ENTRY(at91_pm_suspend_in_sram)
 	mov	tmp1, #0
 	mcr	p15, 0, tmp1, c7, c10, 4
 
-	ldr	tmp1, [r0, #PM_DATA_PMC]
-	str	tmp1, .pmc_base
-	ldr	tmp1, [r0, #PM_DATA_RAMC0]
-	str	tmp1, .sramc_base
-	ldr	tmp1, [r0, #PM_DATA_RAMC1]
-	str	tmp1, .sramc1_base
-	ldr	tmp1, [r0, #PM_DATA_RAMC_PHY]
-	str	tmp1, .sramc_phy_base
-	ldr	tmp1, [r0, #PM_DATA_MEMCTRL]
-	str	tmp1, .memtype
-	ldr	tmp1, [r0, #PM_DATA_MODE]
-	str	tmp1, .pm_mode
+	/* Flush tlb. */
+	mov	r4, #0
+	mcr	p15, 0, r4, c8, c7, 0
+
 	ldr	tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET]
 	str	tmp1, .mckr_offset
 	ldr	tmp1, [r0, #PM_DATA_PMC_VERSION]
 	str	tmp1, .pmc_version
-	/* Both ldrne below are here to preload their address in the TLB */
+	ldr	tmp1, [r0, #PM_DATA_MEMCTRL]
+	str	tmp1, .memtype
+	ldr	tmp1, [r0, #PM_DATA_MODE]
+	str	tmp1, .pm_mode
+
+	/*
+	 * ldrne below are here to preload their address in the TLB as access
+	 * to RAM may be limited while in self-refresh.
+	 */
+	ldr	tmp1, [r0, #PM_DATA_PMC]
+	str	tmp1, .pmc_base
+	cmp	tmp1, #0
+	ldrne	tmp2, [tmp1, #0]
+
+	ldr	tmp1, [r0, #PM_DATA_RAMC0]
+	str	tmp1, .sramc_base
+	cmp	tmp1, #0
+	ldrne	tmp2, [tmp1, #0]
+
+	ldr	tmp1, [r0, #PM_DATA_RAMC1]
+	str	tmp1, .sramc1_base
+	cmp	tmp1, #0
+	ldrne	tmp2, [tmp1, #0]
+
+#ifndef CONFIG_SOC_SAM_V4_V5
+	/* ldrne below are here to preload their address in the TLB */
+	ldr	tmp1, [r0, #PM_DATA_RAMC_PHY]
+	str	tmp1, .sramc_phy_base
+	cmp	tmp1, #0
+	ldrne	tmp2, [tmp1, #0]
+
 	ldr	tmp1, [r0, #PM_DATA_SHDWC]
 	str	tmp1, .shdwc
 	cmp	tmp1, #0
 	ldrne	tmp2, [tmp1, #0]
+
 	ldr	tmp1, [r0, #PM_DATA_SFRBU]
 	str	tmp1, .sfrbu
 	cmp	tmp1, #0
 	ldrne	tmp2, [tmp1, #0x10]
+#endif
 
 	/* Active the self-refresh mode */
 	at91_sramc_self_refresh_ena

arch/arm/mach-dove/include/mach/uncompress.h

@@ -11,7 +11,7 @@
 
 #define LSR_THRE	0x20
 
-static void putc(const char c)
+static inline void putc(const char c)
 {
 	int i;
 
@@ -24,7 +24,7 @@ static void putc(const char c)
 	*UART_THR = c;
 }
 
-static void flush(void)
+static inline void flush(void)
 {
 }
 

arch/arm/mach-imx/mach-imx6q.c

@@ -172,6 +172,9 @@ static void __init imx6q_init_machine(void)
 				imx_get_soc_revision());
 
 	imx6q_enet_phy_init();
+
+	of_platform_default_populate(NULL, NULL, NULL);
+
 	imx_anatop_init();
 	cpu_is_imx6q() ?  imx6q_pm_init() : imx6dl_pm_init();
 	imx6q_1588_init();

arch/arm/mach-imx/pm-imx6.c

@@ -10,6 +10,7 @@
 #include <linux/io.h>
 #include <linux/irq.h>
 #include <linux/genalloc.h>
+#include <linux/irqchip/arm-gic.h>
 #include <linux/mfd/syscon.h>
 #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
 #include <linux/of.h>
@@ -619,6 +620,7 @@ static void __init imx6_pm_common_init(const struct imx6_pm_socdata
 
 static void imx6_pm_stby_poweroff(void)
 {
+	gic_cpu_if_down(0);
 	imx6_set_lpm(STOP_POWER_OFF);
 	imx6q_suspend_finish(0);
 

arch/arm/mach-imx/src.c

@@ -9,6 +9,7 @@
 #include <linux/iopoll.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/platform_device.h>
 #include <linux/reset-controller.h>
 #include <linux/smp.h>
 #include <asm/smp_plat.h>
@@ -81,11 +82,6 @@ static const struct reset_control_ops imx_src_ops = {
 	.reset = imx_src_reset_module,
 };
 
-static struct reset_controller_dev imx_reset_controller = {
-	.ops = &imx_src_ops,
-	.nr_resets = ARRAY_SIZE(sw_reset_bits),
-};
-
 static void imx_gpcv2_set_m_core_pgc(bool enable, u32 offset)
 {
 	writel_relaxed(enable, gpc_base + offset);
@@ -177,10 +173,6 @@ void __init imx_src_init(void)
 	src_base = of_iomap(np, 0);
 	WARN_ON(!src_base);
 
-	imx_reset_controller.of_node = np;
-	if (IS_ENABLED(CONFIG_RESET_CONTROLLER))
-		reset_controller_register(&imx_reset_controller);
-
 	/*
 	 * force warm reset sources to generate cold reset
 	 * for a more reliable restart
@@ -214,3 +206,33 @@ void __init imx7_src_init(void)
 	if (!gpc_base)
 		return;
 }
+
+static const struct of_device_id imx_src_dt_ids[] = {
+	{ .compatible = "fsl,imx51-src" },
+	{ /* sentinel */ }
+};
+
+static int imx_src_probe(struct platform_device *pdev)
+{
+	struct reset_controller_dev *rcdev;
+
+	rcdev = devm_kzalloc(&pdev->dev, sizeof(*rcdev), GFP_KERNEL);
+	if (!rcdev)
+		return -ENOMEM;
+
+	rcdev->ops = &imx_src_ops;
+	rcdev->dev = &pdev->dev;
+	rcdev->of_node = pdev->dev.of_node;
+	rcdev->nr_resets = ARRAY_SIZE(sw_reset_bits);
+
+	return devm_reset_controller_register(&pdev->dev, rcdev);
+}
+
+static struct platform_driver imx_src_driver = {
+	.driver = {
+		.name = "imx-src",
+		.of_match_table = imx_src_dt_ids,
+	},
+	.probe = imx_src_probe,
+};
+builtin_platform_driver(imx_src_driver);

arch/arm/mach-omap1/include/mach/memory.h

@@ -9,16 +9,4 @@
 /* REVISIT: omap1 legacy drivers still rely on this */
 #include <mach/soc.h>
 
-/*
- * Bus address is physical address, except for OMAP-1510 Local Bus.
- * OMAP-1510 bus address is translated into a Local Bus address if the
- * OMAP bus type is lbus. We do the address translation based on the
- * device overriding the defaults used in the dma-mapping API.
- */
-
-/*
- * OMAP-1510 Local Bus address offset
- */
-#define OMAP1510_LB_OFFSET	UL(0x30000000)
-
 #endif

arch/arm/mach-omap1/usb.c

@@ -11,6 +11,7 @@
 #include <linux/platform_device.h>
 #include <linux/dma-map-ops.h>
 #include <linux/io.h>
+#include <linux/delay.h>
 
 #include <asm/irq.h>
 
@@ -206,8 +207,6 @@ static inline void udc_device_init(struct omap_usb_config *pdata)
 
 #endif
 
-#if	IS_ENABLED(CONFIG_USB_OHCI_HCD)
-
 /* The dmamask must be set for OHCI to work */
 static u64 ohci_dmamask = ~(u32)0;
 
@@ -236,20 +235,15 @@ static struct platform_device ohci_device = {
 
 static inline void ohci_device_init(struct omap_usb_config *pdata)
 {
+	if (!IS_ENABLED(CONFIG_USB_OHCI_HCD))
+		return;
+
 	if (cpu_is_omap7xx())
 		ohci_resources[1].start = INT_7XX_USB_HHC_1;
 	pdata->ohci_device = &ohci_device;
 	pdata->ocpi_enable = &ocpi_enable;
 }
 
-#else
-
-static inline void ohci_device_init(struct omap_usb_config *pdata)
-{
-}
-
-#endif
-
 #if	defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG)
 
 static struct resource otg_resources[] = {
@@ -534,6 +528,79 @@ bad:
 }
 
 #ifdef	CONFIG_ARCH_OMAP15XX
+/* OMAP-1510 OHCI has its own MMU for DMA */
+#define OMAP1510_LB_MEMSIZE	32	/* Should be same as SDRAM size */
+#define OMAP1510_LB_CLOCK_DIV	0xfffec10c
+#define OMAP1510_LB_MMU_CTL	0xfffec208
+#define OMAP1510_LB_MMU_LCK	0xfffec224
+#define OMAP1510_LB_MMU_LD_TLB	0xfffec228
+#define OMAP1510_LB_MMU_CAM_H	0xfffec22c
+#define OMAP1510_LB_MMU_CAM_L	0xfffec230
+#define OMAP1510_LB_MMU_RAM_H	0xfffec234
+#define OMAP1510_LB_MMU_RAM_L	0xfffec238
+
+/*
+ * Bus address is physical address, except for OMAP-1510 Local Bus.
+ * OMAP-1510 bus address is translated into a Local Bus address if the
+ * OMAP bus type is lbus.
+ */
+#define OMAP1510_LB_OFFSET	   UL(0x30000000)
+
+/*
+ * OMAP-1510 specific Local Bus clock on/off
+ */
+static int omap_1510_local_bus_power(int on)
+{
+	if (on) {
+		omap_writel((1 << 1) | (1 << 0), OMAP1510_LB_MMU_CTL);
+		udelay(200);
+	} else {
+		omap_writel(0, OMAP1510_LB_MMU_CTL);
+	}
+
+	return 0;
+}
+
+/*
+ * OMAP-1510 specific Local Bus initialization
+ * NOTE: This assumes 32MB memory size in OMAP1510LB_MEMSIZE.
+ *       See also arch/mach-omap/memory.h for __virt_to_dma() and
+ *       __dma_to_virt() which need to match with the physical
+ *       Local Bus address below.
+ */
+static int omap_1510_local_bus_init(void)
+{
+	unsigned int tlb;
+	unsigned long lbaddr, physaddr;
+
+	omap_writel((omap_readl(OMAP1510_LB_CLOCK_DIV) & 0xfffffff8) | 0x4,
+	       OMAP1510_LB_CLOCK_DIV);
+
+	/* Configure the Local Bus MMU table */
+	for (tlb = 0; tlb < OMAP1510_LB_MEMSIZE; tlb++) {
+		lbaddr = tlb * 0x00100000 + OMAP1510_LB_OFFSET;
+		physaddr = tlb * 0x00100000 + PHYS_OFFSET;
+		omap_writel((lbaddr & 0x0fffffff) >> 22, OMAP1510_LB_MMU_CAM_H);
+		omap_writel(((lbaddr & 0x003ffc00) >> 6) | 0xc,
+		       OMAP1510_LB_MMU_CAM_L);
+		omap_writel(physaddr >> 16, OMAP1510_LB_MMU_RAM_H);
+		omap_writel((physaddr & 0x0000fc00) | 0x300, OMAP1510_LB_MMU_RAM_L);
+		omap_writel(tlb << 4, OMAP1510_LB_MMU_LCK);
+		omap_writel(0x1, OMAP1510_LB_MMU_LD_TLB);
+	}
+
+	/* Enable the walking table */
+	omap_writel(omap_readl(OMAP1510_LB_MMU_CTL) | (1 << 3), OMAP1510_LB_MMU_CTL);
+	udelay(200);
+
+	return 0;
+}
+
+static void omap_1510_local_bus_reset(void)
+{
+	omap_1510_local_bus_power(1);
+	omap_1510_local_bus_init();
+}
 
 /* ULPD_DPLL_CTRL */
 #define DPLL_IOB		(1 << 13)
@@ -543,25 +610,6 @@ bad:
 /* ULPD_APLL_CTRL */
 #define APLL_NDPLL_SWITCH	(1 << 0)
 
-static int omap_1510_usb_ohci_notifier(struct notifier_block *nb,
-		unsigned long event, void *data)
-{
-	struct device *dev = data;
-
-	if (event != BUS_NOTIFY_ADD_DEVICE)
-		return NOTIFY_DONE;
-
-	if (strncmp(dev_name(dev), "ohci", 4) == 0 &&
-	    dma_direct_set_offset(dev, PHYS_OFFSET, OMAP1510_LB_OFFSET,
-			(u64)-1))
-		WARN_ONCE(1, "failed to set DMA offset\n");
-	return NOTIFY_OK;
-}
-
-static struct notifier_block omap_1510_usb_ohci_nb = {
-	.notifier_call		= omap_1510_usb_ohci_notifier,
-};
-
 static void __init omap_1510_usb_init(struct omap_usb_config *config)
 {
 	unsigned int val;
@@ -616,19 +664,19 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config)
 	}
 #endif
 
-#if	IS_ENABLED(CONFIG_USB_OHCI_HCD)
-	if (config->register_host) {
+	if (IS_ENABLED(CONFIG_USB_OHCI_HCD) && config->register_host) {
 		int status;
 
-		bus_register_notifier(&platform_bus_type,
-				      &omap_1510_usb_ohci_nb);
 		ohci_device.dev.platform_data = config;
+		dma_direct_set_offset(&ohci_device.dev, PHYS_OFFSET,
+				      OMAP1510_LB_OFFSET, (u64)-1);
 		status = platform_device_register(&ohci_device);
 		if (status)
 			pr_debug("can't register OHCI device, %d\n", status);
 		/* hcd explicitly gates 48MHz */
+
+		config->lb_reset = omap_1510_local_bus_reset;
 	}
-#endif
 }
 
 #else

arch/arm/mach-omap2/Kconfig

@@ -112,7 +112,6 @@ config ARCH_OMAP2PLUS
 	select PM_GENERIC_DOMAINS
 	select PM_GENERIC_DOMAINS_OF
 	select RESET_CONTROLLER
-	select SIMPLE_PM_BUS
 	select SOC_BUS
 	select TI_SYSC
 	select OMAP_IRQCHIP

arch/arm/mach-omap2/omap_hwmod.c

@@ -3614,6 +3614,8 @@ int omap_hwmod_init_module(struct device *dev,
 		oh->flags |= HWMOD_SWSUP_SIDLE_ACT;
 	if (data->cfg->quirks & SYSC_QUIRK_SWSUP_MSTANDBY)
 		oh->flags |= HWMOD_SWSUP_MSTANDBY;
+	if (data->cfg->quirks & SYSC_QUIRK_CLKDM_NOAUTO)
+		oh->flags |= HWMOD_CLKDM_NOAUTO;
 
 	error = omap_hwmod_check_module(dev, oh, data, sysc_fields,
 					rev_offs, sysc_offs, syss_offs,

arch/arm/mm/proc-macros.S

@@ -340,6 +340,7 @@ ENTRY(\name\()_cache_fns)
 
 .macro define_tlb_functions name:req, flags_up:req, flags_smp
 	.type	\name\()_tlb_fns, #object
+	.align 2
 ENTRY(\name\()_tlb_fns)
 	.long	\name\()_flush_user_tlb_range
 	.long	\name\()_flush_kern_tlb_range

arch/arm/net/bpf_jit_32.c

@@ -36,6 +36,10 @@
  *                        +-----+
  *                        |RSVD | JIT scratchpad
  * current ARM_SP =>      +-----+ <= (BPF_FP - STACK_SIZE + SCRATCH_SIZE)
+ *                        | ... | caller-saved registers
+ *                        +-----+
+ *                        | ... | arguments passed on stack
+ * ARM_SP during call =>  +-----|
  *                        |     |
  *                        | ... | Function call stack
  *                        |     |
@@ -63,6 +67,12 @@
  *
  * When popping registers off the stack at the end of a BPF function, we
  * reference them via the current ARM_FP register.
+ *
+ * Some eBPF operations are implemented via a call to a helper function.
+ * Such calls are "invisible" in the eBPF code, so it is up to the calling
+ * program to preserve any caller-saved ARM registers during the call. The
+ * JIT emits code to push and pop those registers onto the stack, immediately
+ * above the callee stack frame.
  */
 #define CALLEE_MASK	(1 << ARM_R4 | 1 << ARM_R5 | 1 << ARM_R6 | \
 			 1 << ARM_R7 | 1 << ARM_R8 | 1 << ARM_R9 | \
@@ -70,6 +80,8 @@
 #define CALLEE_PUSH_MASK (CALLEE_MASK | 1 << ARM_LR)
 #define CALLEE_POP_MASK  (CALLEE_MASK | 1 << ARM_PC)
 
+#define CALLER_MASK	(1 << ARM_R0 | 1 << ARM_R1 | 1 << ARM_R2 | 1 << ARM_R3)
+
 enum {
 	/* Stack layout - these are offsets from (top of stack - 4) */
 	BPF_R2_HI,
@@ -464,6 +476,7 @@ static inline int epilogue_offset(const struct jit_ctx *ctx)
 
 static inline void emit_udivmod(u8 rd, u8 rm, u8 rn, struct jit_ctx *ctx, u8 op)
 {
+	const int exclude_mask = BIT(ARM_R0) | BIT(ARM_R1);
 	const s8 *tmp = bpf2a32[TMP_REG_1];
 
 #if __LINUX_ARM_ARCH__ == 7
@@ -495,11 +508,17 @@ static inline void emit_udivmod(u8 rd, u8 rm, u8 rn, struct jit_ctx *ctx, u8 op)
 		emit(ARM_MOV_R(ARM_R0, rm), ctx);
 	}
 
+	/* Push caller-saved registers on stack */
+	emit(ARM_PUSH(CALLER_MASK & ~exclude_mask), ctx);
+
 	/* Call appropriate function */
 	emit_mov_i(ARM_IP, op == BPF_DIV ?
 		   (u32)jit_udiv32 : (u32)jit_mod32, ctx);
 	emit_blx_r(ARM_IP, ctx);
 
+	/* Restore caller-saved registers from stack */
+	emit(ARM_POP(CALLER_MASK & ~exclude_mask), ctx);
+
 	/* Save return value */
 	if (rd != ARM_R0)
 		emit(ARM_MOV_R(rd, ARM_R0), ctx);

arch/arm/probes/kprobes/core.c

@@ -439,7 +439,7 @@ static struct undef_hook kprobes_arm_break_hook = {
 
 #endif /* !CONFIG_THUMB2_KERNEL */
 
-int __init arch_init_kprobes()
+int __init arch_init_kprobes(void)
 {
 	arm_probes_decode_init();
 #ifdef CONFIG_THUMB2_KERNEL

arch/arm64/Kconfig

@@ -1931,8 +1931,6 @@ source "drivers/cpufreq/Kconfig"
 
 endmenu
 
-source "drivers/firmware/Kconfig"
-
 source "drivers/acpi/Kconfig"
 
 source "arch/arm64/kvm/Kconfig"

arch/arm64/boot/dts/arm/foundation-v8.dtsi

@@ -115,7 +115,6 @@
 
 	bus@8000000 {
 		compatible = "arm,vexpress,v2m-p1", "simple-bus";
-		arm,v2m-memory-map = "rs1";
 		#address-cells = <2>; /* SMB chipselect number and offset */
 		#size-cells = <1>;
 

arch/arm64/boot/dts/arm/fvp-base-revc.dts

@@ -192,32 +192,9 @@
 				remote-endpoint = <&clcd_pads>;
 			};
 		};
-
-	       panel-timing {
-		       clock-frequency = <63500127>;
-		       hactive = <1024>;
-		       hback-porch = <152>;
-		       hfront-porch = <48>;
-		       hsync-len = <104>;
-		       vactive = <768>;
-		       vback-porch = <23>;
-		       vfront-porch = <3>;
-		       vsync-len = <4>;
-	       };
 	};
 
 	bus@8000000 {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0x08000000 0x04000000>,
-			 <1 0 0 0x14000000 0x04000000>,
-			 <2 0 0 0x18000000 0x04000000>,
-			 <3 0 0 0x1c000000 0x04000000>,
-			 <4 0 0 0x0c000000 0x04000000>,
-			 <5 0 0 0x10000000 0x04000000>;
-
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 63>;
 		interrupt-map = <0 0  0 &gic 0 0 GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,

arch/arm64/boot/dts/arm/juno-base.dtsi

@@ -27,8 +27,6 @@
 		reg = <0x0 0x2b1f0000 0x0 0x1000>;
 		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "mhu_lpri_rx",
-				  "mhu_hpri_rx";
 		#mbox-cells = <1>;
 		clocks = <&soc_refclk100mhz>;
 		clock-names = "apb_pclk";
@@ -804,16 +802,6 @@
 	};
 
 	bus@8000000 {
-		compatible = "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0x08000000 0x04000000>,
-			 <1 0 0 0x14000000 0x04000000>,
-			 <2 0 0 0x18000000 0x04000000>,
-			 <3 0 0 0x1c000000 0x04000000>,
-			 <4 0 0 0x0c000000 0x04000000>,
-			 <5 0 0 0x10000000 0x04000000>;
-
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 15>;
 		interrupt-map = <0 0  0 &gic 0 GIC_SPI  68 IRQ_TYPE_LEVEL_HIGH>,

arch/arm64/boot/dts/arm/juno-motherboard.dtsi

@@ -92,16 +92,23 @@
 	};
 
 	bus@8000000 {
-		motherboard-bus {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0x8000000 0 0x8000000 0x18000000>;
+
+		motherboard-bus@8000000 {
 			compatible = "arm,vexpress,v2p-p1", "simple-bus";
 			#address-cells = <2>;  /* SMB chipselect number and offset */
 			#size-cells = <1>;
-			#interrupt-cells = <1>;
-			ranges;
-			model = "V2M-Juno";
+			ranges = <0 0 0 0x08000000 0x04000000>,
+				 <1 0 0 0x14000000 0x04000000>,
+				 <2 0 0 0x18000000 0x04000000>,
+				 <3 0 0 0x1c000000 0x04000000>,
+				 <4 0 0 0x0c000000 0x04000000>,
+				 <5 0 0 0x10000000 0x04000000>;
 			arm,hbi = <0x252>;
 			arm,vexpress,site = <0>;
-			arm,v2m-memory-map = "rs1";
 
 			flash@0 {
 				/* 2 * 32MiB NOR Flash memory mounted on CS0 */
@@ -218,7 +225,7 @@
 					};
 				};
 
-				mmci@50000 {
+				mmc@50000 {
 					compatible = "arm,pl180", "arm,primecell";
 					reg = <0x050000 0x1000>;
 					interrupts = <5>;
@@ -246,7 +253,7 @@
 					clock-names = "KMIREFCLK", "apb_pclk";
 				};
 
-				wdt@f0000 {
+				watchdog@f0000 {
 					compatible = "arm,sp805", "arm,primecell";
 					reg = <0x0f0000 0x10000>;
 					interrupts = <7>;

arch/arm64/boot/dts/arm/rtsm_ve-aemv8a.dts

@@ -133,17 +133,6 @@
 	};
 
 	bus@8000000 {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0x08000000 0x04000000>,
-			 <1 0 0 0x14000000 0x04000000>,
-			 <2 0 0 0x18000000 0x04000000>,
-			 <3 0 0 0x1c000000 0x04000000>,
-			 <4 0 0 0x0c000000 0x04000000>,
-			 <5 0 0 0x10000000 0x04000000>;
-
 		#interrupt-cells = <1>;
 		interrupt-map-mask = <0 0 63>;
 		interrupt-map = <0 0  0 &gic GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,

arch/arm64/boot/dts/arm/rtsm_ve-motherboard-rs2.dtsi

@@ -6,7 +6,7 @@
  */
 / {
 	bus@8000000 {
-		motherboard-bus {
+		motherboard-bus@8000000 {
 			arm,v2m-memory-map = "rs2";
 
 			iofpga-bus@300000000 {

arch/arm64/boot/dts/arm/rtsm_ve-motherboard.dtsi

@@ -77,13 +77,21 @@
 	};
 
 	bus@8000000 {
-		motherboard-bus {
-			arm,v2m-memory-map = "rs1";
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0x8000000 0 0x8000000 0x18000000>;
+
+		motherboard-bus@8000000 {
 			compatible = "arm,vexpress,v2m-p1", "simple-bus";
 			#address-cells = <2>; /* SMB chipselect number and offset */
 			#size-cells = <1>;
-			#interrupt-cells = <1>;
-			ranges;
+			ranges = <0 0 0 0x08000000 0x04000000>,
+				 <1 0 0 0x14000000 0x04000000>,
+				 <2 0 0 0x18000000 0x04000000>,
+				 <3 0 0 0x1c000000 0x04000000>,
+				 <4 0 0 0x0c000000 0x04000000>,
+				 <5 0 0 0x10000000 0x04000000>;
 
 			flash@0 {
 				compatible = "arm,vexpress-flash", "cfi-flash";
@@ -130,7 +138,7 @@
 					clock-names = "apb_pclk";
 				};
 
-				mmci@50000 {
+				mmc@50000 {
 					compatible = "arm,pl180", "arm,primecell";
 					reg = <0x050000 0x1000>;
 					interrupts = <9>, <10>;
@@ -190,7 +198,7 @@
 					clock-names = "uartclk", "apb_pclk";
 				};
 
-				wdt@f0000 {
+				watchdog@f0000 {
 					compatible = "arm,sp805", "arm,primecell";
 					reg = <0x0f0000 0x1000>;
 					interrupts = <0>;

arch/arm64/boot/dts/arm/vexpress-v2f-1xv7-ca53x2.dts

@@ -145,61 +145,6 @@
 	};
 
 	smb: bus@8000000 {
-		compatible = "simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0 0x08000000 0x04000000>,
-			 <1 0 0 0x14000000 0x04000000>,
-			 <2 0 0 0x18000000 0x04000000>,
-			 <3 0 0 0x1c000000 0x04000000>,
-			 <4 0 0 0x0c000000 0x04000000>,
-			 <5 0 0 0x10000000 0x04000000>;
-
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 63>;
-		interrupt-map = <0 0  0 &gic GIC_SPI  0 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  1 &gic GIC_SPI  1 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  2 &gic GIC_SPI  2 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  3 &gic GIC_SPI  3 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  4 &gic GIC_SPI  4 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  5 &gic GIC_SPI  5 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  6 &gic GIC_SPI  6 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  7 &gic GIC_SPI  7 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  8 &gic GIC_SPI  8 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0  9 &gic GIC_SPI  9 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 10 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 11 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 12 &gic GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 13 &gic GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 14 &gic GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 15 &gic GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 16 &gic GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 17 &gic GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 18 &gic GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 19 &gic GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 20 &gic GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 21 &gic GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 22 &gic GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 23 &gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 24 &gic GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 25 &gic GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 26 &gic GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 27 &gic GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 28 &gic GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 29 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 30 &gic GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 31 &gic GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 32 &gic GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 33 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 34 &gic GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 35 &gic GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 36 &gic GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 37 &gic GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 38 &gic GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 39 &gic GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 40 &gic GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 41 &gic GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
-				<0 0 42 &gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+		ranges = <0x8000000 0 0x8000000 0x18000000>;
 	};
 };

arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi

@@ -405,9 +405,9 @@
 			interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <0>; /* fixed up by bootloader */
 			clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
-			voltage-ranges = <1800 1800 3300 3300>;
+			voltage-ranges = <1800 1800>;
 			sdhci,auto-cmd12;
-			broken-cd;
+			non-removable;
 			little-endian;
 			bus-width = <4>;
 			status = "disabled";

arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi

@@ -91,7 +91,7 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		spi-max-frequency = <80000000>;
-		spi-tx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
 	};
 };

arch/arm64/boot/dts/freescale/imx8mm-evk.dts

@@ -48,7 +48,7 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		spi-max-frequency = <80000000>;
-		spi-tx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
 	};
 };

arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi

@@ -102,6 +102,7 @@
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <950000>;
 				regulator-boot-on;
+				regulator-always-on;
 				regulator-ramp-delay = <3125>;
 				nxp,dvs-run-voltage = <950000>;
 				nxp,dvs-standby-voltage = <850000>;

arch/arm64/boot/dts/freescale/imx8mm-venice-gw7902.dts

@@ -647,7 +647,7 @@
 	pinctrl_hog: hoggrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_NAND_CE0_B_GPIO3_IO1	0x40000159 /* M2_GDIS# */
-			MX8MM_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x40000041 /* M2_RST# */
+			MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x40000041 /* M2_RST# */
 			MX8MM_IOMUXC_NAND_DATA01_GPIO3_IO7	0x40000119 /* M2_OFF# */
 			MX8MM_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x40000159 /* M2_WDIS# */
 			MX8MM_IOMUXC_SAI1_TXD2_GPIO4_IO14	0x40000041 /* AMP GPIO1 */

arch/arm64/boot/dts/freescale/imx8mn-beacon-som.dtsi

@@ -101,7 +101,7 @@
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
 		spi-max-frequency = <80000000>;
-		spi-tx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
 	};
 };

arch/arm64/boot/dts/freescale/imx8mn-venice-gw7902.dts

@@ -633,7 +633,7 @@
 	pinctrl_hog: hoggrp {
 		fsl,pins = <
 			MX8MN_IOMUXC_NAND_CE0_B_GPIO3_IO1	0x40000159 /* M2_GDIS# */
-			MX8MN_IOMUXC_GPIO1_IO12_GPIO1_IO12	0x40000041 /* M2_RST# */
+			MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13	0x40000041 /* M2_RST# */
 			MX8MN_IOMUXC_NAND_DATA01_GPIO3_IO7	0x40000119 /* M2_OFF# */
 			MX8MN_IOMUXC_GPIO1_IO15_GPIO1_IO15	0x40000159 /* M2_WDIS# */
 			MX8MN_IOMUXC_SAI2_RXFS_GPIO4_IO21	0x40000041 /* APP GPIO1 */

arch/arm64/boot/dts/freescale/imx8mp-phycore-som.dtsi

@@ -74,7 +74,7 @@
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <80000000>;
-		spi-tx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
 	};
 };

arch/arm64/boot/dts/freescale/imx8mq-evk.dts

@@ -337,6 +337,8 @@
 		#size-cells = <1>;
 		compatible = "micron,n25q256a", "jedec,spi-nor";
 		spi-max-frequency = <29000000>;
+		spi-tx-bus-width = <1>;
+		spi-rx-bus-width = <4>;
 	};
 };
 

arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts

@@ -281,7 +281,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		reg = <0>;
-		spi-tx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
 		spi-rx-bus-width = <4>;
 		m25p,fast-read;
 		spi-max-frequency = <50000000>;

arch/arm64/boot/dts/qcom/ipq8074.dtsi

@@ -487,7 +487,6 @@
 				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&qusb_phy_0>, <&usb0_ssphy>;
 				phy-names = "usb2-phy", "usb3-phy";
-				tx-fifo-resize;
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
 				snps,dis_u2_susphy_quirk;
@@ -528,7 +527,6 @@
 				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
 				phys = <&qusb_phy_1>, <&usb1_ssphy>;
 				phy-names = "usb2-phy", "usb3-phy";
-				tx-fifo-resize;
 				snps,is-utmi-l1-suspend;
 				snps,hird-threshold = /bits/ 8 <0x0>;
 				snps,dis_u2_susphy_quirk;

arch/arm64/boot/dts/qcom/pm8150.dtsi

@@ -48,8 +48,10 @@
 		#size-cells = <0>;
 
 		pon: power-on@800 {
-			compatible = "qcom,pm8916-pon";
+			compatible = "qcom,pm8998-pon";
 			reg = <0x0800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
 
 			pon_pwrkey: pwrkey {
 				compatible = "qcom,pm8941-pwrkey";