Linux 5.14

Pull clk fix from Stephen Boyd:
 "One hotfix for a NULL pointer deref in the Renesas usb clk driver"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: renesas: rcar-usb2-clock-sel: Fix kernel NULL pointer dereference

Documentation/bpf/libbpf/libbpf_naming_convention.rst

@@ -108,7 +108,7 @@ This bump in ABI version is at most once per kernel development cycle.
 
 For example, if current state of ``libbpf.map`` is:
 
-.. code-block:: c
+.. code-block:: none
 
         LIBBPF_0.0.1 {
         	global:
@@ -121,7 +121,7 @@ For example, if current state of ``libbpf.map`` is:
 , and a new symbol ``bpf_func_c`` is being introduced, then
 ``libbpf.map`` should be changed like this:
 
-.. code-block:: c
+.. code-block:: none
 
         LIBBPF_0.0.1 {
         	global:

Documentation/devicetree/bindings/iio/st,st-sensors.yaml

@@ -152,47 +152,6 @@ allOf:
           maxItems: 1
         st,drdy-int-pin: false
 
-  - if:
-      properties:
-        compatible:
-          enum:
-            # Two intertial interrupts i.e. accelerometer/gyro interrupts
-            - st,h3lis331dl-accel
-            - st,l3g4200d-gyro
-            - st,l3g4is-gyro
-            - st,l3gd20-gyro
-            - st,l3gd20h-gyro
-            - st,lis2de12
-            - st,lis2dw12
-            - st,lis2hh12
-            - st,lis2dh12-accel
-            - st,lis331dl-accel
-            - st,lis331dlh-accel
-            - st,lis3de
-            - st,lis3dh-accel
-            - st,lis3dhh
-            - st,lis3mdl-magn
-            - st,lng2dm-accel
-            - st,lps331ap-press
-            - st,lsm303agr-accel
-            - st,lsm303dlh-accel
-            - st,lsm303dlhc-accel
-            - st,lsm303dlm-accel
-            - st,lsm330-accel
-            - st,lsm330-gyro
-            - st,lsm330d-accel
-            - st,lsm330d-gyro
-            - st,lsm330dl-accel
-            - st,lsm330dl-gyro
-            - st,lsm330dlc-accel
-            - st,lsm330dlc-gyro
-            - st,lsm9ds0-gyro
-            - st,lsm9ds1-magn
-    then:
-      properties:
-        interrupts:
-          maxItems: 2
-
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml

@@ -24,10 +24,10 @@ allOf:
 select:
   properties:
     compatible:
-      items:
-        - enum:
-            - sifive,fu540-c000-ccache
-            - sifive,fu740-c000-ccache
+      contains:
+        enum:
+          - sifive,fu540-c000-ccache
+          - sifive,fu740-c000-ccache
 
   required:
     - compatible

Documentation/gpu/rfc/i915_gem_lmem.rst

@@ -18,114 +18,5 @@ real, with all the uAPI bits is:
         * Route shmem backend over to TTM SYSTEM for discrete
         * TTM purgeable object support
         * Move i915 buddy allocator over to TTM
-        * MMAP ioctl mode(see `I915 MMAP`_)
-        * SET/GET ioctl caching(see `I915 SET/GET CACHING`_)
 * Send RFC(with mesa-dev on cc) for final sign off on the uAPI
 * Add pciid for DG1 and turn on uAPI for real
-
-New object placement and region query uAPI
-==========================================
-Starting from DG1 we need to give userspace the ability to allocate buffers from
-device local-memory. Currently the driver supports gem_create, which can place
-buffers in system memory via shmem, and the usual assortment of other
-interfaces, like dumb buffers and userptr.
-
-To support this new capability, while also providing a uAPI which will work
-beyond just DG1, we propose to offer three new bits of uAPI:
-
-DRM_I915_QUERY_MEMORY_REGIONS
------------------------------
-New query ID which allows userspace to discover the list of supported memory
-regions(like system-memory and local-memory) for a given device. We identify
-each region with a class and instance pair, which should be unique. The class
-here would be DEVICE or SYSTEM, and the instance would be zero, on platforms
-like DG1.
-
-Side note: The class/instance design is borrowed from our existing engine uAPI,
-where we describe every physical engine in terms of its class, and the
-particular instance, since we can have more than one per class.
-
-In the future we also want to expose more information which can further
-describe the capabilities of a region.
-
-.. kernel-doc:: include/uapi/drm/i915_drm.h
-        :functions: drm_i915_gem_memory_class drm_i915_gem_memory_class_instance drm_i915_memory_region_info drm_i915_query_memory_regions
-
-GEM_CREATE_EXT
---------------
-New ioctl which is basically just gem_create but now allows userspace to provide
-a chain of possible extensions. Note that if we don't provide any extensions and
-set flags=0 then we get the exact same behaviour as gem_create.
-
-Side note: We also need to support PXP[1] in the near future, which is also
-applicable to integrated platforms, and adds its own gem_create_ext extension,
-which basically lets userspace mark a buffer as "protected".
-
-.. kernel-doc:: include/uapi/drm/i915_drm.h
-        :functions: drm_i915_gem_create_ext
-
-I915_GEM_CREATE_EXT_MEMORY_REGIONS
-----------------------------------
-Implemented as an extension for gem_create_ext, we would now allow userspace to
-optionally provide an immutable list of preferred placements at creation time,
-in priority order, for a given buffer object.  For the placements we expect
-them each to use the class/instance encoding, as per the output of the regions
-query. Having the list in priority order will be useful in the future when
-placing an object, say during eviction.
-
-.. kernel-doc:: include/uapi/drm/i915_drm.h
-        :functions: drm_i915_gem_create_ext_memory_regions
-
-One fair criticism here is that this seems a little over-engineered[2]. If we
-just consider DG1 then yes, a simple gem_create.flags or something is totally
-all that's needed to tell the kernel to allocate the buffer in local-memory or
-whatever. However looking to the future we need uAPI which can also support
-upcoming Xe HP multi-tile architecture in a sane way, where there can be
-multiple local-memory instances for a given device, and so using both class and
-instance in our uAPI to describe regions is desirable, although specifically
-for DG1 it's uninteresting, since we only have a single local-memory instance.
-
-Existing uAPI issues
-====================
-Some potential issues we still need to resolve.
-
-I915 MMAP
----------
-In i915 there are multiple ways to MMAP GEM object, including mapping the same
-object using different mapping types(WC vs WB), i.e multiple active mmaps per
-object. TTM expects one MMAP at most for the lifetime of the object. If it
-turns out that we have to backpedal here, there might be some potential
-userspace fallout.
-
-I915 SET/GET CACHING
---------------------
-In i915 we have set/get_caching ioctl. TTM doesn't let us to change this, but
-DG1 doesn't support non-snooped pcie transactions, so we can just always
-allocate as WB for smem-only buffers.  If/when our hw gains support for
-non-snooped pcie transactions then we must fix this mode at allocation time as
-a new GEM extension.
-
-This is related to the mmap problem, because in general (meaning, when we're
-not running on intel cpus) the cpu mmap must not, ever, be inconsistent with
-allocation mode.
-
-Possible idea is to let the kernel picks the mmap mode for userspace from the
-following table:
-
-smem-only: WB. Userspace does not need to call clflush.
-
-smem+lmem: We only ever allow a single mode, so simply allocate this as uncached
-memory, and always give userspace a WC mapping. GPU still does snooped access
-here(assuming we can't turn it off like on DG1), which is a bit inefficient.
-
-lmem only: always WC
-
-This means on discrete you only get a single mmap mode, all others must be
-rejected. That's probably going to be a new default mode or something like
-that.
-
-Links
-=====
-[1] https://patchwork.freedesktop.org/series/86798/
-
-[2] https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5599#note_553791

Documentation/i2c/index.rst

@@ -17,6 +17,7 @@ Introduction
    busses/index
    i2c-topology
    muxes/i2c-mux-gpio
+   i2c-sysfs
 
 Writing device drivers
 ======================

Documentation/networking/netdev-FAQ.rst

@@ -228,6 +228,23 @@ before posting to the mailing list. The patchwork build bot instance
 gets overloaded very easily and netdev@vger really doesn't need more
 traffic if we can help it.
 
+netdevsim is great, can I extend it for my out-of-tree tests?
+-------------------------------------------------------------
+
+No, `netdevsim` is a test vehicle solely for upstream tests.
+(Please add your tests under tools/testing/selftests/.)
+
+We also give no guarantees that `netdevsim` won't change in the future
+in a way which would break what would normally be considered uAPI.
+
+Is netdevsim considered a "user" of an API?
+-------------------------------------------
+
+Linux kernel has a long standing rule that no API should be added unless
+it has a real, in-tree user. Mock-ups and tests based on `netdevsim` are
+strongly encouraged when adding new APIs, but `netdevsim` in itself
+is **not** considered a use case/user.
+
 Any other tips to help ensure my net/net-next patch gets OK'd?
 --------------------------------------------------------------
 Attention to detail.  Re-read your own work as if you were the

Documentation/networking/nf_conntrack-sysctl.rst

@@ -191,19 +191,9 @@ nf_flowtable_tcp_timeout - INTEGER (seconds)
         TCP connections may be offloaded from nf conntrack to nf flow table.
         Once aged, the connection is returned to nf conntrack with tcp pickup timeout.
 
-nf_flowtable_tcp_pickup - INTEGER (seconds)
-        default 120
-
-        TCP connection timeout after being aged from nf flow table offload.
-
 nf_flowtable_udp_timeout - INTEGER (seconds)
         default 30
 
         Control offload timeout for udp connections.
         UDP connections may be offloaded from nf conntrack to nf flow table.
         Once aged, the connection is returned to nf conntrack with udp pickup timeout.
-
-nf_flowtable_udp_pickup - INTEGER (seconds)
-        default 30
-
-        UDP connection timeout after being aged from nf flow table offload.

Documentation/networking/operstates.rst

@@ -73,7 +73,9 @@ IF_OPER_LOWERLAYERDOWN (3):
  state (f.e. VLAN).
 
 IF_OPER_TESTING (4):
- Unused in current kernel.
+ Interface is in testing mode, for example executing driver self-tests
+ or media (cable) test. It can't be used for normal traffic until tests
+ complete.
 
 IF_OPER_DORMANT (5):
  Interface is L1 up, but waiting for an external event, f.e. for a
@@ -111,7 +113,7 @@ it as lower layer.
 
 Note that for certain kind of soft-devices, which are not managing any
 real hardware, it is possible to set this bit from userspace.  One
-should use TVL IFLA_CARRIER to do so.
+should use TLV IFLA_CARRIER to do so.
 
 netif_carrier_ok() can be used to query that bit.
 

Documentation/userspace-api/seccomp_filter.rst

@@ -263,7 +263,7 @@ Userspace can also add file descriptors to the notifying process via
 ``ioctl(SECCOMP_IOCTL_NOTIF_ADDFD)``. The ``id`` member of
 ``struct seccomp_notif_addfd`` should be the same ``id`` as in
 ``struct seccomp_notif``. The ``newfd_flags`` flag may be used to set flags
-like O_EXEC on the file descriptor in the notifying process. If the supervisor
+like O_CLOEXEC on the file descriptor in the notifying process. If the supervisor
 wants to inject the file descriptor with a specific number, the
 ``SECCOMP_ADDFD_FLAG_SETFD`` flag can be used, and set the ``newfd`` member to
 the specific number to use. If that file descriptor is already open in the

Documentation/virt/kvm/api.rst

@@ -855,7 +855,7 @@ in-kernel irqchip (GIC), and for in-kernel irqchip can tell the GIC to
 use PPIs designated for specific cpus.  The irq field is interpreted
 like this::
 
-  bits:  |  31 ... 28  | 27 ... 24 | 23  ... 16 | 15 ... 0 |
+  bits:  |  31 ... 28  | 27 ... 24 | 23  ... 16 | 15 ... 0 |
   field: | vcpu2_index | irq_type  | vcpu_index |  irq_id  |
 
 The irq_type field has the following values:
@@ -2149,10 +2149,10 @@ prior to calling the KVM_RUN ioctl.
 Errors:
 
   ======   ============================================================
-  ENOENT   no such register
-  EINVAL   invalid register ID, or no such register or used with VMs in
+  ENOENT   no such register
+  EINVAL   invalid register ID, or no such register or used with VMs in
            protected virtualization mode on s390
-  EPERM    (arm64) register access not allowed before vcpu finalization
+  EPERM    (arm64) register access not allowed before vcpu finalization
   ======   ============================================================
 
 (These error codes are indicative only: do not rely on a specific error
@@ -2590,10 +2590,10 @@ following id bit patterns::
 Errors include:
 
   ======== ============================================================
-  ENOENT   no such register
-  EINVAL   invalid register ID, or no such register or used with VMs in
+  ENOENT   no such register
+  EINVAL   invalid register ID, or no such register or used with VMs in
            protected virtualization mode on s390
-  EPERM    (arm64) register access not allowed before vcpu finalization
+  EPERM    (arm64) register access not allowed before vcpu finalization
   ======== ============================================================
 
 (These error codes are indicative only: do not rely on a specific error
@@ -3112,13 +3112,13 @@ current state.  "addr" is ignored.
 Errors:
 
   ======     =================================================================
-  EINVAL     the target is unknown, or the combination of features is invalid.
-  ENOENT     a features bit specified is unknown.
+  EINVAL     the target is unknown, or the combination of features is invalid.
+  ENOENT     a features bit specified is unknown.
   ======     =================================================================
 
 This tells KVM what type of CPU to present to the guest, and what
-optional features it should have.  This will cause a reset of the cpu
-registers to their initial values.  If this is not called, KVM_RUN will
+optional features it should have.  This will cause a reset of the cpu
+registers to their initial values.  If this is not called, KVM_RUN will
 return ENOEXEC for that vcpu.
 
 The initial values are defined as:
@@ -3239,8 +3239,8 @@ VCPU matching underlying host.
 Errors:
 
   =====      ==============================================================
-  E2BIG      the reg index list is too big to fit in the array specified by
-             the user (the number required will be written into n).
+  E2BIG      the reg index list is too big to fit in the array specified by
+             the user (the number required will be written into n).
   =====      ==============================================================
 
 ::
@@ -3288,7 +3288,7 @@ specific device.
 ARM/arm64 divides the id field into two parts, a device id and an
 address type id specific to the individual device::
 
-  bits:  | 63        ...       32 | 31    ...    16 | 15    ...    0 |
+  bits:  | 63        ...       32 | 31    ...    16 | 15    ...    0 |
   field: |        0x00000000      |     device id   |  addr type id  |
 
 ARM/arm64 currently only require this when using the in-kernel GIC
@@ -7049,7 +7049,7 @@ In combination with KVM_CAP_X86_USER_SPACE_MSR, this allows user space to
 trap and emulate MSRs that are outside of the scope of KVM as well as
 limit the attack surface on KVM's MSR emulation code.
 
-8.28 KVM_CAP_ENFORCE_PV_CPUID
+8.28 KVM_CAP_ENFORCE_PV_FEATURE_CPUID
 -----------------------------
 
 Architectures: x86

Documentation/virt/kvm/locking.rst

@@ -25,10 +25,10 @@ On x86:
 
 - vcpu->mutex is taken outside kvm->arch.hyperv.hv_lock
 
-- kvm->arch.mmu_lock is an rwlock.  kvm->arch.tdp_mmu_pages_lock is
-  taken inside kvm->arch.mmu_lock, and cannot be taken without already
-  holding kvm->arch.mmu_lock (typically with ``read_lock``, otherwise
-  there's no need to take kvm->arch.tdp_mmu_pages_lock at all).
+- kvm->arch.mmu_lock is an rwlock.  kvm->arch.tdp_mmu_pages_lock and
+  kvm->arch.mmu_unsync_pages_lock are taken inside kvm->arch.mmu_lock, and
+  cannot be taken without already holding kvm->arch.mmu_lock (typically with
+  ``read_lock`` for the TDP MMU, thus the need for additional spinlocks).
 
 Everything else is a leaf: no other lock is taken inside the critical
 sections.

MAINTAINERS

@@ -3866,6 +3866,16 @@ L:	bcm-kernel-feedback-list@broadcom.com
 S:	Maintained
 F:	drivers/mtd/nand/raw/brcmnand/
 
+BROADCOM STB PCIE DRIVER
+M:	Jim Quinlan <jim2101024@gmail.com>
+M:	Nicolas Saenz Julienne <nsaenz@kernel.org>
+M:	Florian Fainelli <f.fainelli@gmail.com>
+M:	bcm-kernel-feedback-list@broadcom.com
+L:	linux-pci@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+F:	drivers/pci/controller/pcie-brcmstb.c
+
 BROADCOM SYSTEMPORT ETHERNET DRIVER
 M:	Florian Fainelli <f.fainelli@gmail.com>
 L:	bcm-kernel-feedback-list@broadcom.com
@@ -4498,7 +4508,7 @@ L:	clang-built-linux@googlegroups.com
 S:	Supported
 W:	https://clangbuiltlinux.github.io/
 B:	https://github.com/ClangBuiltLinux/linux/issues
-C:	irc://chat.freenode.net/clangbuiltlinux
+C:	irc://irc.libera.chat/clangbuiltlinux
 F:	Documentation/kbuild/llvm.rst
 F:	include/linux/compiler-clang.h
 F:	scripts/clang-tools/
@@ -6945,7 +6955,7 @@ F:	include/uapi/linux/mdio.h
 F:	include/uapi/linux/mii.h
 
 EXFAT FILE SYSTEM
-M:	Namjae Jeon <namjae.jeon@samsung.com>
+M:	Namjae Jeon <linkinjeon@kernel.org>
 M:	Sungjong Seo <sj1557.seo@samsung.com>
 L:	linux-fsdevel@vger.kernel.org
 S:	Maintained
@@ -7858,9 +7868,9 @@ S:	Maintained
 F:	drivers/input/touchscreen/goodix.c
 
 GOOGLE ETHERNET DRIVERS
-M:	Catherine Sullivan <csully@google.com>
-R:	Sagi Shahar <sagis@google.com>
-R:	Jon Olson <jonolson@google.com>
+M:	Jeroen de Borst <jeroendb@google.com>
+R:	Catherine Sullivan <csully@google.com>
+R:	David Awogbemila <awogbemila@google.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	Documentation/networking/device_drivers/ethernet/google/gve.rst
@@ -11327,6 +11337,12 @@ W:	https://linuxtv.org
 T:	git git://linuxtv.org/media_tree.git
 F:	drivers/media/radio/radio-maxiradio*
 
+MCBA MICROCHIP CAN BUS ANALYZER TOOL DRIVER
+R:	Yasushi SHOJI <yashi@spacecubics.com>
+L:	linux-can@vger.kernel.org
+S:	Maintained
+F:	drivers/net/can/usb/mcba_usb.c
+
 MCAN MMIO DEVICE DRIVER
 M:	Chandrasekar Ramakrishnan <rcsekar@samsung.com>
 L:	linux-can@vger.kernel.org
@@ -14424,6 +14440,13 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
 F:	drivers/pci/controller/dwc/pcie-histb.c
 
+PCIE DRIVER FOR INTEL LGM GW SOC
+M:	Rahul Tanwar <rtanwar@maxlinear.com>
+L:	linux-pci@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/pci/intel-gw-pcie.yaml
+F:	drivers/pci/controller/dwc/pcie-intel-gw.c
+
 PCIE DRIVER FOR MEDIATEK
 M:	Ryder Lee <ryder.lee@mediatek.com>
 M:	Jianjun Wang <jianjun.wang@mediatek.com>
@@ -15468,6 +15491,8 @@ M:	Pan, Xinhui <Xinhui.Pan@amd.com>
 L:	amd-gfx@lists.freedesktop.org
 S:	Supported
 T:	git https://gitlab.freedesktop.org/agd5f/linux.git
+B:	https://gitlab.freedesktop.org/drm/amd/-/issues
+C:	irc://irc.oftc.net/radeon
 F:	drivers/gpu/drm/amd/
 F:	drivers/gpu/drm/radeon/
 F:	include/uapi/drm/amdgpu_drm.h
@@ -15795,7 +15820,7 @@ F:	Documentation/devicetree/bindings/i2c/renesas,iic-emev2.yaml
 F:	drivers/i2c/busses/i2c-emev2.c
 
 RENESAS ETHERNET DRIVERS
-R:	Sergei Shtylyov <sergei.shtylyov@gmail.com>
+R:	Sergey Shtylyov <s.shtylyov@omp.ru>
 L:	netdev@vger.kernel.org
 L:	linux-renesas-soc@vger.kernel.org
 F:	Documentation/devicetree/bindings/net/renesas,*.yaml
@@ -17807,7 +17832,7 @@ F:	include/linux/sync_file.h
 F:	include/uapi/linux/sync_file.h
 
 SYNOPSYS ARC ARCHITECTURE
-M:	Vineet Gupta <vgupta@synopsys.com>
+M:	Vineet Gupta <vgupta@kernel.org>
 L:	linux-snps-arc@lists.infradead.org
 S:	Supported
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc.git
@@ -20009,7 +20034,8 @@ F:	Documentation/devicetree/bindings/extcon/wlf,arizona.yaml
 F:	Documentation/devicetree/bindings/mfd/wlf,arizona.yaml
 F:	Documentation/devicetree/bindings/mfd/wm831x.txt
 F:	Documentation/devicetree/bindings/regulator/wlf,arizona.yaml
-F:	Documentation/devicetree/bindings/sound/wlf,arizona.yaml
+F:	Documentation/devicetree/bindings/sound/wlf,*.yaml
+F:	Documentation/devicetree/bindings/sound/wm*
 F:	Documentation/hwmon/wm83??.rst
 F:	arch/arm/mach-s3c/mach-crag6410*
 F:	drivers/clk/clk-wm83*.c

Makefile

@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 14
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION =
 NAME = Opossums on Parade
 
 # *DOCUMENTATION*
@@ -546,7 +546,6 @@ export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
 PHONY += scripts_basic
 scripts_basic:
 	$(Q)$(MAKE) $(build)=scripts/basic
-	$(Q)rm -f .tmp_quiet_recordmcount
 
 PHONY += outputmakefile
 ifdef building_out_of_srctree
@@ -1317,6 +1316,16 @@ PHONY += scripts_unifdef
 scripts_unifdef: scripts_basic
 	$(Q)$(MAKE) $(build)=scripts scripts/unifdef
 
+# ---------------------------------------------------------------------------
+# Install
+
+# Many distributions have the custom install script, /sbin/installkernel.
+# If DKMS is installed, 'make install' will eventually recuses back
+# to the this Makefile to build and install external modules.
+# Cancel sub_make_done so that options such as M=, V=, etc. are parsed.
+
+install: sub_make_done :=
+
 # ---------------------------------------------------------------------------
 # Tools
 

arch/alpha/Kconfig

@@ -14,7 +14,6 @@ config ALPHA
 	select PCI_SYSCALL if PCI
 	select HAVE_AOUT
 	select HAVE_ASM_MODVERSIONS
-	select HAVE_IDE
 	select HAVE_PCSPKR_PLATFORM
 	select HAVE_PERF_EVENTS
 	select NEED_DMA_MAP_STATE
@@ -532,7 +531,7 @@ config SMP
 	  will run faster if you say N here.
 
 	  See also the SMP-HOWTO available at
-	  <http://www.tldp.org/docs.html#howto>.
+	  <https://www.tldp.org/docs.html#howto>.
 
 	  If you don't know what to do here, say N.
 

arch/alpha/boot/bootp.c

@@ -23,7 +23,7 @@
 #include "ksize.h"
 
 extern unsigned long switch_to_osf_pal(unsigned long nr,
-	struct pcb_struct * pcb_va, struct pcb_struct * pcb_pa,
+	struct pcb_struct *pcb_va, struct pcb_struct *pcb_pa,
 	unsigned long *vptb);
 
 extern void move_stack(unsigned long new_stack);

arch/alpha/boot/bootpz.c

@@ -200,7 +200,7 @@ extern char _end;
 	START_ADDR	KSEG address of the entry point of kernel code.
 
 	ZERO_PGE	KSEG address of page full of zeroes, but 
-			upon entry to kerne cvan be expected
+			upon entry to kernel, it can be expected
 			to hold the parameter list and possible
 			INTRD information.
 

arch/alpha/boot/misc.c

@@ -30,7 +30,7 @@ extern long srm_printk(const char *, ...)
      __attribute__ ((format (printf, 1, 2)));
 
 /*
- * gzip delarations
+ * gzip declarations
  */
 #define OF(args)  args
 #define STATIC static

arch/alpha/configs/defconfig

@@ -70,3 +70,4 @@ CONFIG_DEBUG_INFO=y
 CONFIG_ALPHA_LEGACY_START_ADDRESS=y
 CONFIG_MATHEMU=y
 CONFIG_CRYPTO_HMAC=y
+CONFIG_DEVTMPFS=y

arch/alpha/include/asm/compiler.h

@@ -4,15 +4,4 @@
 
 #include <uapi/asm/compiler.h>
 
-/* Some idiots over in <linux/compiler.h> thought inline should imply
-   always_inline.  This breaks stuff.  We'll include this file whenever
-   we run into such problems.  */
-
-#include <linux/compiler.h>
-#undef inline
-#undef __inline__
-#undef __inline
-#undef __always_inline
-#define __always_inline		inline __attribute__((always_inline))
-
 #endif /* __ALPHA_COMPILER_H */

arch/alpha/include/asm/syscall.h

@@ -9,4 +9,10 @@ static inline int syscall_get_arch(struct task_struct *task)
 	return AUDIT_ARCH_ALPHA;
 }
 
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	return regs->r0;
+}
+
 #endif	/* _ASM_ALPHA_SYSCALL_H */

arch/alpha/kernel/osf_sys.c

@@ -834,7 +834,7 @@ SYSCALL_DEFINE5(osf_setsysinfo, unsigned long, op, void __user *, buffer,
 			return -EFAULT;
 		state = &current_thread_info()->ieee_state;
 
-		/* Update softare trap enable bits.  */
+		/* Update software trap enable bits.  */
 		*state = (*state & ~IEEE_SW_MASK) | (swcr & IEEE_SW_MASK);
 
 		/* Update the real fpcr.  */
@@ -854,7 +854,7 @@ SYSCALL_DEFINE5(osf_setsysinfo, unsigned long, op, void __user *, buffer,
 		state = &current_thread_info()->ieee_state;
 		exc &= IEEE_STATUS_MASK;
 
-		/* Update softare trap enable bits.  */
+		/* Update software trap enable bits.  */
  		swcr = (*state & IEEE_SW_MASK) | exc;
 		*state |= exc;
 

arch/alpha/kernel/perf_event.c

@@ -574,7 +574,7 @@ static void alpha_pmu_start(struct perf_event *event, int flags)
  * Check that CPU performance counters are supported.
  * - currently support EV67 and later CPUs.
  * - actually some later revisions of the EV6 have the same PMC model as the
- *     EV67 but we don't do suffiently deep CPU detection to detect them.
+ *     EV67 but we don't do sufficiently deep CPU detection to detect them.
  *     Bad luck to the very few people who might have one, I guess.
  */
 static int supported_cpu(void)

arch/alpha/kernel/process.c

@@ -256,7 +256,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 		childstack->r26 = (unsigned long) ret_from_kernel_thread;
 		childstack->r9 = usp;	/* function */
 		childstack->r10 = kthread_arg;
-		childregs->hae = alpha_mv.hae_cache,
+		childregs->hae = alpha_mv.hae_cache;
 		childti->pcb.usp = 0;
 		return 0;
 	}

arch/alpha/kernel/setup.c

@@ -319,18 +319,19 @@ setup_memory(void *kernel_end)
 		       i, cluster->usage, cluster->start_pfn,
 		       cluster->start_pfn + cluster->numpages);
 
-		/* Bit 0 is console/PALcode reserved.  Bit 1 is
-		   non-volatile memory -- we might want to mark
-		   this for later.  */
-		if (cluster->usage & 3)
-			continue;
-
 		end = cluster->start_pfn + cluster->numpages;
 		if (end > max_low_pfn)
 			max_low_pfn = end;
 
 		memblock_add(PFN_PHYS(cluster->start_pfn),
 			     cluster->numpages << PAGE_SHIFT);
+
+		/* Bit 0 is console/PALcode reserved.  Bit 1 is
+		   non-volatile memory -- we might want to mark
+		   this for later.  */
+		if (cluster->usage & 3)
+			memblock_reserve(PFN_PHYS(cluster->start_pfn),
+				         cluster->numpages << PAGE_SHIFT);
 	}
 
 	/*

arch/alpha/kernel/smp.c

@@ -582,7 +582,7 @@ void
 smp_send_stop(void)
 {
 	cpumask_t to_whom;
-	cpumask_copy(&to_whom, cpu_possible_mask);
+	cpumask_copy(&to_whom, cpu_online_mask);
 	cpumask_clear_cpu(smp_processor_id(), &to_whom);
 #ifdef DEBUG_IPI_MSG
 	if (hard_smp_processor_id() != boot_cpu_id)

arch/alpha/kernel/sys_nautilus.c

@@ -212,7 +212,7 @@ nautilus_init_pci(void)
 
 	/* Use default IO. */
 	pci_add_resource(&bridge->windows, &ioport_resource);
-	/* Irongate PCI memory aperture, calculate requred size before
+	/* Irongate PCI memory aperture, calculate required size before
 	   setting it up. */
 	pci_add_resource(&bridge->windows, &irongate_mem);
 

arch/alpha/kernel/traps.c

@@ -730,7 +730,7 @@ do_entUnaUser(void __user * va, unsigned long opcode,
 	long error;
 
 	/* Check the UAC bits to decide what the user wants us to do
-	   with the unaliged access.  */
+	   with the unaligned access.  */
 
 	if (!(current_thread_info()->status & TS_UAC_NOPRINT)) {
 		if (__ratelimit(&ratelimit)) {

arch/alpha/math-emu/math.c

@@ -65,7 +65,7 @@ static long (*save_emul) (unsigned long pc);
 long do_alpha_fp_emul_imprecise(struct pt_regs *, unsigned long);
 long do_alpha_fp_emul(unsigned long);
 
-int init_module(void)
+static int alpha_fp_emul_init_module(void)
 {
 	save_emul_imprecise = alpha_fp_emul_imprecise;
 	save_emul = alpha_fp_emul;
@@ -73,12 +73,14 @@ int init_module(void)
 	alpha_fp_emul = do_alpha_fp_emul;
 	return 0;
 }
+module_init(alpha_fp_emul_init_module);
 
-void cleanup_module(void)
+static void alpha_fp_emul_cleanup_module(void)
 {
 	alpha_fp_emul_imprecise = save_emul_imprecise;
 	alpha_fp_emul = save_emul;
 }
+module_exit(alpha_fp_emul_cleanup_module);
 
 #undef  alpha_fp_emul_imprecise
 #define alpha_fp_emul_imprecise		do_alpha_fp_emul_imprecise
@@ -401,3 +403,5 @@ alpha_fp_emul_imprecise (struct pt_regs *regs, unsigned long write_mask)
 egress:
 	return si_code;
 }
+
+EXPORT_SYMBOL(__udiv_qrnnd);

arch/arc/Kconfig

@@ -409,7 +409,7 @@ choice
 	help
 	  Depending on the configuration, CPU can contain DSP registers
 	  (ACC0_GLO, ACC0_GHI, DSP_BFLY0, DSP_CTRL, DSP_FFT_CTRL).
-	  Bellow is options describing how to handle these registers in
+	  Below are options describing how to handle these registers in
 	  interrupt entry / exit and in context switch.
 
 config ARC_DSP_NONE

arch/arc/include/asm/checksum.h

@@ -24,7 +24,7 @@
  */
 static inline __sum16 csum_fold(__wsum s)
 {
-	unsigned r = s << 16 | s >> 16;	/* ror */
+	unsigned int r = s << 16 | s >> 16;	/* ror */
 	s = ~s;
 	s -= r;
 	return s >> 16;

arch/arc/include/asm/perf_event.h

@@ -123,7 +123,7 @@ static const char * const arc_pmu_ev_hw_map[] = {
 #define C(_x)			PERF_COUNT_HW_CACHE_##_x
 #define CACHE_OP_UNSUPPORTED	0xffff
 
-static const unsigned arc_pmu_cache_map[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
+static const unsigned int arc_pmu_cache_map[C(MAX)][C(OP_MAX)][C(RESULT_MAX)] = {
 	[C(L1D)] = {
 		[C(OP_READ)] = {
 			[C(RESULT_ACCESS)]	= PERF_COUNT_ARC_LDC,

arch/arc/kernel/fpu.c

@@ -57,23 +57,26 @@ void fpu_save_restore(struct task_struct *prev, struct task_struct *next)
 
 void fpu_init_task(struct pt_regs *regs)
 {
+	const unsigned int fwe = 0x80000000;
+
 	/* default rounding mode */
 	write_aux_reg(ARC_REG_FPU_CTRL, 0x100);
 
-	/* set "Write enable" to allow explicit write to exception flags */
-	write_aux_reg(ARC_REG_FPU_STATUS, 0x80000000);
+	/* Initialize to zero: setting requires FWE be set */
+	write_aux_reg(ARC_REG_FPU_STATUS, fwe);
 }
 
 void fpu_save_restore(struct task_struct *prev, struct task_struct *next)
 {
 	struct arc_fpu *save = &prev->thread.fpu;
 	struct arc_fpu *restore = &next->thread.fpu;
+	const unsigned int fwe = 0x80000000;
 
 	save->ctrl = read_aux_reg(ARC_REG_FPU_CTRL);
 	save->status = read_aux_reg(ARC_REG_FPU_STATUS);
 
 	write_aux_reg(ARC_REG_FPU_CTRL, restore->ctrl);
-	write_aux_reg(ARC_REG_FPU_STATUS, restore->status);
+	write_aux_reg(ARC_REG_FPU_STATUS, (fwe | restore->status));
 }
 
 #endif

arch/arc/kernel/unwind.c

@@ -260,7 +260,7 @@ static void init_unwind_hdr(struct unwind_table *table,
 {
 	const u8 *ptr;
 	unsigned long tableSize = table->size, hdrSize;
-	unsigned n;
+	unsigned int n;
 	const u32 *fde;
 	struct {
 		u8 version;
@@ -462,7 +462,7 @@ static uleb128_t get_uleb128(const u8 **pcur, const u8 *end)
 {
 	const u8 *cur = *pcur;
 	uleb128_t value;
-	unsigned shift;
+	unsigned int shift;
 
 	for (shift = 0, value = 0; cur < end; shift += 7) {
 		if (shift + 7 > 8 * sizeof(value)
@@ -483,7 +483,7 @@ static sleb128_t get_sleb128(const u8 **pcur, const u8 *end)
 {
 	const u8 *cur = *pcur;
 	sleb128_t value;
-	unsigned shift;
+	unsigned int shift;
 
 	for (shift = 0, value = 0; cur < end; shift += 7) {
 		if (shift + 7 > 8 * sizeof(value)
@@ -609,7 +609,7 @@ static unsigned long read_pointer(const u8 **pLoc, const void *end,
 static signed fde_pointer_type(const u32 *cie)
 {
 	const u8 *ptr = (const u8 *)(cie + 2);
-	unsigned version = *ptr;
+	unsigned int version = *ptr;
 
 	if (*++ptr) {
 		const char *aug;
@@ -904,7 +904,7 @@ int arc_unwind(struct unwind_frame_info *frame)
 	const u8 *ptr = NULL, *end = NULL;
 	unsigned long pc = UNW_PC(frame) - frame->call_frame;
 	unsigned long startLoc = 0, endLoc = 0, cfa;
-	unsigned i;
+	unsigned int i;
 	signed ptrType = -1;
 	uleb128_t retAddrReg = 0;
 	const struct unwind_table *table;

arch/arc/kernel/vmlinux.lds.S

@@ -88,6 +88,8 @@ SECTIONS
 		CPUIDLE_TEXT
 		LOCK_TEXT
 		KPROBES_TEXT
+		IRQENTRY_TEXT
+		SOFTIRQENTRY_TEXT
 		*(.fixup)
 		*(.gnu.warning)
 	}

arch/arm/Kconfig

@@ -95,7 +95,6 @@ config ARM
 	select HAVE_FUNCTION_TRACER if !XIP_KERNEL
 	select HAVE_GCC_PLUGINS
 	select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)
-	select HAVE_IDE if PCI || ISA || PCMCIA
 	select HAVE_IRQ_TIME_ACCOUNTING
 	select HAVE_KERNEL_GZIP
 	select HAVE_KERNEL_LZ4
@@ -361,7 +360,6 @@ config ARCH_FOOTBRIDGE
 	bool "FootBridge"
 	select CPU_SA110
 	select FOOTBRIDGE
-	select HAVE_IDE
 	select NEED_MACH_IO_H if !MMU
 	select NEED_MACH_MEMORY_H
 	help
@@ -430,7 +428,6 @@ config ARCH_PXA
 	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIO_PXA
 	select GPIOLIB
-	select HAVE_IDE
 	select IRQ_DOMAIN
 	select PLAT_PXA
 	select SPARSE_IRQ
@@ -446,7 +443,6 @@ config ARCH_RPC
 	select ARM_HAS_SG_CHAIN
 	select CPU_SA110
 	select FIQ
-	select HAVE_IDE
 	select HAVE_PATA_PLATFORM
 	select ISA_DMA_API
 	select LEGACY_TIMER_TICK
@@ -469,7 +465,6 @@ config ARCH_SA1100
 	select CPU_SA1100
 	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIOLIB
-	select HAVE_IDE
 	select IRQ_DOMAIN
 	select ISA
 	select NEED_MACH_MEMORY_H
@@ -505,7 +500,6 @@ config ARCH_OMAP1
 	select GENERIC_IRQ_CHIP
 	select GENERIC_IRQ_MULTI_HANDLER
 	select GPIOLIB
-	select HAVE_IDE
 	select HAVE_LEGACY_CLK
 	select IRQ_DOMAIN
 	select NEED_MACH_IO_H if PCCARD

arch/arm/boot/dts/am437x-l4.dtsi

@@ -1595,7 +1595,7 @@
 				compatible = "ti,am4372-d_can", "ti,am3352-d_can";
 				reg = <0x0 0x2000>;
 				clocks = <&dcan1_fck>;
-				clock-name = "fck";
+				clock-names = "fck";
 				syscon-raminit = <&scm_conf 0x644 1>;
 				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -582,7 +582,7 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
-	clock-frequency = <400000>;
+	clock-frequency = <100000>;
 
 	tps65218: tps65218@24 {
 		reg = <0x24>;

arch/arm/boot/dts/imx53-m53menlo.dts

@@ -388,13 +388,13 @@
 
 		pinctrl_power_button: powerbutgrp {
 			fsl,pins = <
-				MX53_PAD_SD2_DATA2__GPIO1_13		0x1e4
+				MX53_PAD_SD2_DATA0__GPIO1_15		0x1e4
 			>;
 		};
 
 		pinctrl_power_out: poweroutgrp {
 			fsl,pins = <
-				MX53_PAD_SD2_DATA0__GPIO1_15		0x1e4
+				MX53_PAD_SD2_DATA2__GPIO1_13		0x1e4
 			>;
 		};
 

arch/arm/boot/dts/imx6qdl-sr-som.dtsi

@@ -54,7 +54,13 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
 	phy-mode = "rgmii-id";
-	phy-reset-duration = <2>;
+
+	/*
+	 * The PHY seems to require a long-enough reset duration to avoid
+	 * some rare issues where the PHY gets stuck in an inconsistent and
+	 * non-functional state at boot-up. 10ms proved to be fine .
+	 */
+	phy-reset-duration = <10>;
 	phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
 	status = "okay";
 

arch/arm/boot/dts/imx6ull-colibri-wifi.dtsi

@@ -43,6 +43,7 @@
 	assigned-clock-rates = <0>, <198000000>;
 	cap-power-off-card;
 	keep-power-in-suspend;
+	max-frequency = <25000000>;
 	mmc-pwrseq = <&wifi_pwrseq>;
 	no-1-8-v;
 	non-removable;

arch/arm/boot/dts/omap5-board-common.dtsi

@@ -30,14 +30,6 @@
 		regulator-max-microvolt = <5000000>;
 	};
 
-	vdds_1v8_main: fixedregulator-vdds_1v8_main {
-		compatible = "regulator-fixed";
-		regulator-name = "vdds_1v8_main";
-		vin-supply = <&smps7_reg>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-	};
-
 	vmmcsd_fixed: fixedregulator-mmcsd {
 		compatible = "regulator-fixed";
 		regulator-name = "vmmcsd_fixed";
@@ -487,6 +479,7 @@
 					regulator-boot-on;
 				};
 
+				vdds_1v8_main:
 				smps7_reg: smps7 {
 					/* VDDS_1v8_OMAP over VDDS_1v8_MAIN */
 					regulator-name = "smps7";

arch/arm/boot/dts/ste-nomadik-stn8815.dtsi

@@ -755,14 +755,14 @@
 			status = "disabled";
 		};
 
-		vica: intc@10140000 {
+		vica: interrupt-controller@10140000 {
 			compatible = "arm,versatile-vic";
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x10140000 0x20>;
 		};
 
-		vicb: intc@10140020 {
+		vicb: interrupt-controller@10140020 {
 			compatible = "arm,versatile-vic";
 			interrupt-controller;
 			#interrupt-cells = <1>;

arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi

@@ -37,7 +37,7 @@
 		poll-interval = <20>;
 
 		/*
-		 * The EXTi IRQ line 3 is shared with touchscreen and ethernet,
+		 * The EXTi IRQ line 3 is shared with ethernet,
 		 * so mark this as polled GPIO key.
 		 */
 		button-0 {
@@ -46,6 +46,16 @@
 			gpios = <&gpiof 3 GPIO_ACTIVE_LOW>;
 		};
 
+		/*
+		 * The EXTi IRQ line 6 is shared with touchscreen,
+		 * so mark this as polled GPIO key.
+		 */
+		button-1 {
+			label = "TA2-GPIO-B";
+			linux,code = <KEY_B>;
+			gpios = <&gpiod 6 GPIO_ACTIVE_LOW>;
+		};
+
 		/*
 		 * The EXTi IRQ line 0 is shared with PMIC,
 		 * so mark this as polled GPIO key.
@@ -60,13 +70,6 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		button-1 {
-			label = "TA2-GPIO-B";
-			linux,code = <KEY_B>;
-			gpios = <&gpiod 6 GPIO_ACTIVE_LOW>;
-			wakeup-source;
-		};
-
 		button-3 {
 			label = "TA4-GPIO-D";
 			linux,code = <KEY_D>;
@@ -82,6 +85,7 @@
 			label = "green:led5";
 			gpios = <&gpioc 6 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
+			status = "disabled";
 		};
 
 		led-1 {
@@ -185,8 +189,8 @@
 	touchscreen@38 {
 		compatible = "edt,edt-ft5406";
 		reg = <0x38>;
-		interrupt-parent = <&gpiog>;
-		interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
+		interrupt-parent = <&gpioc>;
+		interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
 	};
 };
 

arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi

@@ -12,6 +12,8 @@
 	aliases {
 		ethernet0 = &ethernet0;
 		ethernet1 = &ksz8851;
+		rtc0 = &hwrtc;
+		rtc1 = &rtc;
 	};
 
 	memory@c0000000 {
@@ -138,6 +140,7 @@
 			reset-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <500>;
 			reset-deassert-us = <500>;
+			smsc,disable-energy-detect;
 			interrupt-parent = <&gpioi>;
 			interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
 		};
@@ -248,7 +251,7 @@
 	/delete-property/dmas;
 	/delete-property/dma-names;
 
-	rtc@32 {
+	hwrtc: rtc@32 {
 		compatible = "microcrystal,rv8803";
 		reg = <0x32>;
 	};

arch/arm/configs/nhk8815_defconfig

@@ -15,8 +15,6 @@ CONFIG_SLAB=y
 CONFIG_ARCH_NOMADIK=y
 CONFIG_MACH_NOMADIK_8815NHK=y
 CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
@@ -52,9 +50,9 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_ONENAND=y
 CONFIG_MTD_ONENAND_VERIFY_WRITE=y
 CONFIG_MTD_ONENAND_GENERIC=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_MTD_NAND_FSMC=y
+CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_CRYPTOLOOP=y
 CONFIG_BLK_DEV_RAM=y
@@ -97,6 +95,7 @@ CONFIG_REGULATOR=y
 CONFIG_DRM=y
 CONFIG_DRM_PANEL_TPO_TPG110=y
 CONFIG_DRM_PL111=y
+CONFIG_FB=y
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
 CONFIG_BACKLIGHT_PWM=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
@@ -136,9 +135,8 @@ CONFIG_NLS_ISO8859_15=y
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_DES=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_INFO=y
-# CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_SCHED_DEBUG is not set
 # CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set

arch/arm/include/asm/memory.h

@@ -160,10 +160,11 @@ extern unsigned long vectors_base;
 
 /*
  * Physical start and end address of the kernel sections. These addresses are
- * 2MB-aligned to match the section mappings placed over the kernel.
+ * 2MB-aligned to match the section mappings placed over the kernel. We use
+ * u64 so that LPAE mappings beyond the 32bit limit will work out as well.
  */
-extern u32 kernel_sec_start;
-extern u32 kernel_sec_end;
+extern u64 kernel_sec_start;
+extern u64 kernel_sec_end;
 
 /*
  * Physical vs virtual RAM address space conversion.  These are

arch/arm/kernel/head.S

@@ -49,7 +49,8 @@
 
 	/*
 	 * This needs to be assigned at runtime when the linker symbols are
-	 * resolved.
+	 * resolved. These are unsigned 64bit really, but in this assembly code
+	 * We store them as 32bit.
 	 */
 	.pushsection .data
 	.align	2
@@ -57,7 +58,9 @@
 	.globl	kernel_sec_end
 kernel_sec_start:
 	.long	0
+	.long	0
 kernel_sec_end:
+	.long	0
 	.long	0
 	.popsection
 
@@ -250,7 +253,11 @@ __create_page_tables:
 	add	r0, r4, #KERNEL_OFFSET >> (SECTION_SHIFT - PMD_ORDER)
 	ldr	r6, =(_end - 1)
 	adr_l	r5, kernel_sec_start		@ _pa(kernel_sec_start)
-	str	r8, [r5]			@ Save physical start of kernel
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	str	r8, [r5, #4]			@ Save physical start of kernel (BE)
+#else
+	str	r8, [r5]			@ Save physical start of kernel (LE)
+#endif
 	orr	r3, r8, r7			@ Add the MMU flags
 	add	r6, r4, r6, lsr #(SECTION_SHIFT - PMD_ORDER)
 1:	str	r3, [r0], #1 << PMD_ORDER
@@ -259,7 +266,11 @@ __create_page_tables:
 	bls	1b
 	eor	r3, r3, r7			@ Remove the MMU flags
 	adr_l	r5, kernel_sec_end		@ _pa(kernel_sec_end)
-	str	r3, [r5]			@ Save physical end of kernel
+#ifdef CONFIG_CPU_ENDIAN_BE8
+	str	r3, [r5, #4]			@ Save physical end of kernel (BE)
+#else
+	str	r3, [r5]			@ Save physical end of kernel (LE)
+#endif
 
 #ifdef CONFIG_XIP_KERNEL
 	/*

arch/arm/mach-davinci/Kconfig

@@ -9,7 +9,6 @@ menuconfig ARCH_DAVINCI
 	select PM_GENERIC_DOMAINS_OF if PM && OF
 	select REGMAP_MMIO
 	select RESET_CONTROLLER
-	select HAVE_IDE
 	select PINCTRL_SINGLE
 
 if ARCH_DAVINCI

arch/arm/mach-imx/common.h

@@ -68,7 +68,6 @@ void imx_set_cpu_arg(int cpu, u32 arg);
 void v7_secondary_startup(void);
 void imx_scu_map_io(void);
 void imx_smp_prepare(void);
-void imx_gpcv2_set_core1_pdn_pup_by_software(bool pdn);
 #else
 static inline void imx_scu_map_io(void) {}
 static inline void imx_smp_prepare(void) {}
@@ -81,6 +80,7 @@ void imx_gpc_mask_all(void);
 void imx_gpc_restore_all(void);
 void imx_gpc_hwirq_mask(unsigned int hwirq);
 void imx_gpc_hwirq_unmask(unsigned int hwirq);
+void imx_gpcv2_set_core1_pdn_pup_by_software(bool pdn);
 void imx_anatop_init(void);
 void imx_anatop_pre_suspend(void);
 void imx_anatop_post_resume(void);

arch/arm/mach-imx/mmdc.c

@@ -103,6 +103,7 @@ struct mmdc_pmu {
 	struct perf_event *mmdc_events[MMDC_NUM_COUNTERS];
 	struct hlist_node node;
 	struct fsl_mmdc_devtype_data *devtype_data;
+	struct clk *mmdc_ipg_clk;
 };
 
 /*
@@ -462,11 +463,14 @@ static int imx_mmdc_remove(struct platform_device *pdev)
 
 	cpuhp_state_remove_instance_nocalls(cpuhp_mmdc_state, &pmu_mmdc->node);
 	perf_pmu_unregister(&pmu_mmdc->pmu);
+	iounmap(pmu_mmdc->mmdc_base);
+	clk_disable_unprepare(pmu_mmdc->mmdc_ipg_clk);
 	kfree(pmu_mmdc);
 	return 0;
 }
 
-static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_base)
+static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_base,
+			      struct clk *mmdc_ipg_clk)
 {
 	struct mmdc_pmu *pmu_mmdc;
 	char *name;
@@ -494,6 +498,7 @@ static int imx_mmdc_perf_init(struct platform_device *pdev, void __iomem *mmdc_b
 	}
 
 	mmdc_num = mmdc_pmu_init(pmu_mmdc, mmdc_base, &pdev->dev);
+	pmu_mmdc->mmdc_ipg_clk = mmdc_ipg_clk;
 	if (mmdc_num == 0)
 		name = "mmdc";
 	else
@@ -529,7 +534,7 @@ pmu_free:
 
 #else
 #define imx_mmdc_remove NULL
-#define imx_mmdc_perf_init(pdev, mmdc_base) 0
+#define imx_mmdc_perf_init(pdev, mmdc_base, mmdc_ipg_clk) 0
 #endif
 
 static int imx_mmdc_probe(struct platform_device *pdev)
@@ -567,7 +572,13 @@ static int imx_mmdc_probe(struct platform_device *pdev)
 	val &= ~(1 << BP_MMDC_MAPSR_PSD);
 	writel_relaxed(val, reg);
 
-	return imx_mmdc_perf_init(pdev, mmdc_base);
+	err = imx_mmdc_perf_init(pdev, mmdc_base, mmdc_ipg_clk);
+	if (err) {
+		iounmap(mmdc_base);
+		clk_disable_unprepare(mmdc_ipg_clk);
+	}
+
+	return err;
 }
 
 int imx_mmdc_get_ddr_type(void)

arch/arm/mach-ixp4xx/Kconfig

@@ -91,6 +91,7 @@ config MACH_IXDP465
 
 config MACH_GORAMO_MLR
 	bool "GORAMO Multi Link Router"
+	depends on IXP4XX_PCI_LEGACY
 	help
 	  Say 'Y' here if you want your kernel to support GORAMO
 	  MultiLink router.

arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h

@@ -218,30 +218,30 @@
 /*
  * PCI Control/Status Registers
  */
-#define IXP4XX_PCI_CSR(x) ((volatile u32 *)(IXP4XX_PCI_CFG_BASE_VIRT+(x)))
+#define _IXP4XX_PCI_CSR(x) ((volatile u32 *)(IXP4XX_PCI_CFG_BASE_VIRT+(x)))
 
-#define PCI_NP_AD               IXP4XX_PCI_CSR(PCI_NP_AD_OFFSET)
-#define PCI_NP_CBE              IXP4XX_PCI_CSR(PCI_NP_CBE_OFFSET)
-#define PCI_NP_WDATA            IXP4XX_PCI_CSR(PCI_NP_WDATA_OFFSET)
-#define PCI_NP_RDATA            IXP4XX_PCI_CSR(PCI_NP_RDATA_OFFSET)
-#define PCI_CRP_AD_CBE          IXP4XX_PCI_CSR(PCI_CRP_AD_CBE_OFFSET)
-#define PCI_CRP_WDATA           IXP4XX_PCI_CSR(PCI_CRP_WDATA_OFFSET)
-#define PCI_CRP_RDATA           IXP4XX_PCI_CSR(PCI_CRP_RDATA_OFFSET)
-#define PCI_CSR                 IXP4XX_PCI_CSR(PCI_CSR_OFFSET) 
-#define PCI_ISR                 IXP4XX_PCI_CSR(PCI_ISR_OFFSET)
-#define PCI_INTEN               IXP4XX_PCI_CSR(PCI_INTEN_OFFSET)
-#define PCI_DMACTRL             IXP4XX_PCI_CSR(PCI_DMACTRL_OFFSET)
-#define PCI_AHBMEMBASE          IXP4XX_PCI_CSR(PCI_AHBMEMBASE_OFFSET)
-#define PCI_AHBIOBASE           IXP4XX_PCI_CSR(PCI_AHBIOBASE_OFFSET)
-#define PCI_PCIMEMBASE          IXP4XX_PCI_CSR(PCI_PCIMEMBASE_OFFSET)
-#define PCI_AHBDOORBELL         IXP4XX_PCI_CSR(PCI_AHBDOORBELL_OFFSET)
-#define PCI_PCIDOORBELL         IXP4XX_PCI_CSR(PCI_PCIDOORBELL_OFFSET)
-#define PCI_ATPDMA0_AHBADDR     IXP4XX_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET)
-#define PCI_ATPDMA0_PCIADDR     IXP4XX_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET)
-#define PCI_ATPDMA0_LENADDR     IXP4XX_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET)
-#define PCI_ATPDMA1_AHBADDR     IXP4XX_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET)
-#define PCI_ATPDMA1_PCIADDR     IXP4XX_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET)
-#define PCI_ATPDMA1_LENADDR     IXP4XX_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET)
+#define PCI_NP_AD               _IXP4XX_PCI_CSR(PCI_NP_AD_OFFSET)
+#define PCI_NP_CBE              _IXP4XX_PCI_CSR(PCI_NP_CBE_OFFSET)
+#define PCI_NP_WDATA            _IXP4XX_PCI_CSR(PCI_NP_WDATA_OFFSET)
+#define PCI_NP_RDATA            _IXP4XX_PCI_CSR(PCI_NP_RDATA_OFFSET)
+#define PCI_CRP_AD_CBE          _IXP4XX_PCI_CSR(PCI_CRP_AD_CBE_OFFSET)
+#define PCI_CRP_WDATA           _IXP4XX_PCI_CSR(PCI_CRP_WDATA_OFFSET)
+#define PCI_CRP_RDATA           _IXP4XX_PCI_CSR(PCI_CRP_RDATA_OFFSET)
+#define PCI_CSR                 _IXP4XX_PCI_CSR(PCI_CSR_OFFSET) 
+#define PCI_ISR                 _IXP4XX_PCI_CSR(PCI_ISR_OFFSET)
+#define PCI_INTEN               _IXP4XX_PCI_CSR(PCI_INTEN_OFFSET)
+#define PCI_DMACTRL             _IXP4XX_PCI_CSR(PCI_DMACTRL_OFFSET)
+#define PCI_AHBMEMBASE          _IXP4XX_PCI_CSR(PCI_AHBMEMBASE_OFFSET)
+#define PCI_AHBIOBASE           _IXP4XX_PCI_CSR(PCI_AHBIOBASE_OFFSET)
+#define PCI_PCIMEMBASE          _IXP4XX_PCI_CSR(PCI_PCIMEMBASE_OFFSET)
+#define PCI_AHBDOORBELL         _IXP4XX_PCI_CSR(PCI_AHBDOORBELL_OFFSET)
+#define PCI_PCIDOORBELL         _IXP4XX_PCI_CSR(PCI_PCIDOORBELL_OFFSET)
+#define PCI_ATPDMA0_AHBADDR     _IXP4XX_PCI_CSR(PCI_ATPDMA0_AHBADDR_OFFSET)
+#define PCI_ATPDMA0_PCIADDR     _IXP4XX_PCI_CSR(PCI_ATPDMA0_PCIADDR_OFFSET)
+#define PCI_ATPDMA0_LENADDR     _IXP4XX_PCI_CSR(PCI_ATPDMA0_LENADDR_OFFSET)
+#define PCI_ATPDMA1_AHBADDR     _IXP4XX_PCI_CSR(PCI_ATPDMA1_AHBADDR_OFFSET)
+#define PCI_ATPDMA1_PCIADDR     _IXP4XX_PCI_CSR(PCI_ATPDMA1_PCIADDR_OFFSET)
+#define PCI_ATPDMA1_LENADDR     _IXP4XX_PCI_CSR(PCI_ATPDMA1_LENADDR_OFFSET)
 
 /*
  * PCI register values and bit definitions 

arch/arm/mach-omap2/omap_hwmod.c

@@ -3776,6 +3776,7 @@ struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh)
 	struct omap_hwmod_ocp_if *oi;
 	struct clockdomain *clkdm;
 	struct clk_hw_omap *clk;
+	struct clk_hw *hw;
 
 	if (!oh)
 		return NULL;
@@ -3792,7 +3793,14 @@ struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh)
 		c = oi->_clk;
 	}
 
-	clk = to_clk_hw_omap(__clk_get_hw(c));
+	hw = __clk_get_hw(c);
+	if (!hw)
+		return NULL;
+
+	clk = to_clk_hw_omap(hw);
+	if (!clk)
+		return NULL;
+
 	clkdm = clk->clkdm;
 	if (!clkdm)
 		return NULL;

arch/arm/mach-rpc/riscpc.c

@@ -49,6 +49,7 @@ static int __init parse_tag_acorn(const struct tag *tag)
 		fallthrough;	/* ??? */
 	case 256:
 		vram_size += PAGE_SIZE * 256;
+		break;
 	default:
 		break;
 	}

arch/arm/mm/mmu.c

@@ -1608,6 +1608,13 @@ static void __init early_paging_init(const struct machine_desc *mdesc)
 	if (offset == 0)
 		return;
 
+	/*
+	 * Offset the kernel section physical offsets so that the kernel
+	 * mapping will work out later on.
+	 */
+	kernel_sec_start += offset;
+	kernel_sec_end += offset;
+
 	/*
 	 * Get the address of the remap function in the 1:1 identity
 	 * mapping setup by the early page table assembly code.  We
@@ -1716,7 +1723,7 @@ void __init paging_init(const struct machine_desc *mdesc)
 {
 	void *zero_page;
 
-	pr_debug("physical kernel sections: 0x%08x-0x%08x\n",
+	pr_debug("physical kernel sections: 0x%08llx-0x%08llx\n",
 		 kernel_sec_start, kernel_sec_end);
 
 	prepare_page_table();

arch/arm/mm/pv-fixup-asm.S

@@ -29,7 +29,7 @@ ENTRY(lpae_pgtables_remap_asm)
 	ldr	r6, =(_end - 1)
 	add	r7, r2, #0x1000
 	add	r6, r7, r6, lsr #SECTION_SHIFT - L2_ORDER
-	add	r7, r7, #PAGE_OFFSET >> (SECTION_SHIFT - L2_ORDER)
+	add	r7, r7, #KERNEL_OFFSET >> (SECTION_SHIFT - L2_ORDER)
 1:	ldrd	r4, r5, [r7]
 	adds	r4, r4, r0
 	adc	r5, r5, r1

arch/arm/net/bpf_jit_32.c

@@ -1602,6 +1602,9 @@ exit:
 		rn = arm_bpf_get_reg32(src_lo, tmp2[1], ctx);
 		emit_ldx_r(dst, rn, off, ctx, BPF_SIZE(code));
 		break;
+	/* speculation barrier */
+	case BPF_ST | BPF_NOSPEC:
+		break;
 	/* ST: *(size *)(dst + off) = imm */
 	case BPF_ST | BPF_MEM | BPF_W:
 	case BPF_ST | BPF_MEM | BPF_H:

arch/arm64/Kconfig

@@ -156,6 +156,7 @@ config ARM64
 	select HAVE_ARCH_KGDB
 	select HAVE_ARCH_MMAP_RND_BITS
 	select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
+	select HAVE_ARCH_PFN_VALID
 	select HAVE_ARCH_PREL32_RELOCATIONS
 	select HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
 	select HAVE_ARCH_SECCOMP_FILTER
@@ -1800,11 +1801,11 @@ config RANDOMIZE_BASE
 	  If unsure, say N.
 
 config RANDOMIZE_MODULE_REGION_FULL
-	bool "Randomize the module region over a 4 GB range"
+	bool "Randomize the module region over a 2 GB range"
 	depends on RANDOMIZE_BASE
 	default y
 	help
-	  Randomizes the location of the module region inside a 4 GB window
+	  Randomizes the location of the module region inside a 2 GB window
 	  covering the core kernel. This way, it is less likely for modules
 	  to leak information about the location of core kernel data structures
 	  but it does imply that function calls between modules and the core
@@ -1812,7 +1813,10 @@ config RANDOMIZE_MODULE_REGION_FULL
 
 	  When this option is not set, the module region will be randomized over
 	  a limited range that contains the [_stext, _etext] interval of the
-	  core kernel, so branch relocations are always in range.
+	  core kernel, so branch relocations are almost always in range unless
+	  ARM64_MODULE_PLTS is enabled and the region is exhausted. In this
+	  particular case of region exhaustion, modules might be able to fall
+	  back to a larger 2GB area.
 
 config CC_HAVE_STACKPROTECTOR_SYSREG
 	def_bool $(cc-option,-mstack-protector-guard=sysreg -mstack-protector-guard-reg=sp_el0 -mstack-protector-guard-offset=0)

arch/arm64/Makefile

@@ -21,19 +21,11 @@ LDFLAGS_vmlinux		+= -shared -Bsymbolic -z notext \
 endif
 
 ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
-  ifneq ($(CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419),y)
-$(warning ld does not support --fix-cortex-a53-843419; kernel may be susceptible to erratum)
-  else
+  ifeq ($(CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419),y)
 LDFLAGS_vmlinux	+= --fix-cortex-a53-843419
   endif
 endif
 
-ifeq ($(CONFIG_ARM64_USE_LSE_ATOMICS), y)
-  ifneq ($(CONFIG_ARM64_LSE_ATOMICS), y)
-$(warning LSE atomics not supported by binutils)
-  endif
-endif
-
 cc_has_k_constraint := $(call try-run,echo				\
 	'int main(void) {						\
 		asm volatile("and w0, w0, %w0" :: "K" (4294967295));	\
@@ -176,10 +168,23 @@ vdso_install:
 
 archprepare:
 	$(Q)$(MAKE) $(build)=arch/arm64/tools kapi
+ifeq ($(CONFIG_ARM64_ERRATUM_843419),y)
+  ifneq ($(CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419),y)
+	@echo "warning: ld does not support --fix-cortex-a53-843419; kernel may be susceptible to erratum" >&2
+  endif
+endif
+ifeq ($(CONFIG_ARM64_USE_LSE_ATOMICS),y)
+  ifneq ($(CONFIG_ARM64_LSE_ATOMICS),y)
+	@echo "warning: LSE atomics not supported by binutils" >&2
+  endif
+endif
+
 
 # We use MRPROPER_FILES and CLEAN_FILES now
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
+	$(Q)$(MAKE) $(clean)=arch/arm64/kernel/vdso
+	$(Q)$(MAKE) $(clean)=arch/arm64/kernel/vdso32
 
 ifeq ($(KBUILD_EXTMOD),)
 # We need to generate vdso-offsets.h before compiling certain files in kernel/.

arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dts

@@ -54,6 +54,7 @@
 
 &mscc_felix_port0 {
 	label = "swp0";
+	managed = "in-band-status";
 	phy-handle = <&phy0>;
 	phy-mode = "sgmii";
 	status = "okay";
@@ -61,6 +62,7 @@
 
 &mscc_felix_port1 {
 	label = "swp1";
+	managed = "in-band-status";
 	phy-handle = <&phy1>;
 	phy-mode = "sgmii";
 	status = "okay";

arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi

@@ -66,7 +66,7 @@
 		};
 	};
 
-	sysclk: clock-sysclk {
+	sysclk: sysclk {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <100000000>;

arch/arm64/boot/dts/freescale/imx8mp.dtsi

@@ -579,7 +579,7 @@
 			};
 
 			flexcan1: can@308c0000 {
-				compatible = "fsl,imx8mp-flexcan", "fsl,imx6q-flexcan";
+				compatible = "fsl,imx8mp-flexcan";
 				reg = <0x308c0000 0x10000>;
 				interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MP_CLK_IPG_ROOT>,
@@ -594,7 +594,7 @@
 			};
 
 			flexcan2: can@308d0000 {
-				compatible = "fsl,imx8mp-flexcan", "fsl,imx6q-flexcan";
+				compatible = "fsl,imx8mp-flexcan";
 				reg = <0x308d0000 0x10000>;
 				interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MP_CLK_IPG_ROOT>,

arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts

@@ -19,6 +19,8 @@
 	aliases {
 		spi0 = &spi0;
 		ethernet1 = &eth1;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
 	};
 
 	chosen {
@@ -119,6 +121,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <100000>;
+	/delete-property/ mrvl,i2c-fast-mode;
 	status = "okay";
 
 	rtc@6f {

arch/arm64/boot/dts/nvidia/tegra194.dtsi

@@ -1840,7 +1840,11 @@
 
 		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE1R &emc>,
 				<&mc TEGRA194_MEMORY_CLIENT_PCIE1W &emc>;
-		interconnect-names = "read", "write";
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA194_SID_PCIE1>;
+		iommu-map = <0x0 &smmu TEGRA194_SID_PCIE1 0x1000>;
+		iommu-map-mask = <0x0>;
+		dma-coherent;
 	};
 
 	pcie@14120000 {
@@ -1890,7 +1894,11 @@
 
 		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE2AR &emc>,
 				<&mc TEGRA194_MEMORY_CLIENT_PCIE2AW &emc>;
-		interconnect-names = "read", "write";
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA194_SID_PCIE2>;
+		iommu-map = <0x0 &smmu TEGRA194_SID_PCIE2 0x1000>;
+		iommu-map-mask = <0x0>;
+		dma-coherent;
 	};
 
 	pcie@14140000 {
@@ -1940,7 +1948,11 @@
 
 		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE3R &emc>,
 				<&mc TEGRA194_MEMORY_CLIENT_PCIE3W &emc>;
-		interconnect-names = "read", "write";
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA194_SID_PCIE3>;
+		iommu-map = <0x0 &smmu TEGRA194_SID_PCIE3 0x1000>;
+		iommu-map-mask = <0x0>;
+		dma-coherent;
 	};
 
 	pcie@14160000 {
@@ -1990,7 +2002,11 @@
 
 		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE4R &emc>,
 				<&mc TEGRA194_MEMORY_CLIENT_PCIE4W &emc>;
-		interconnect-names = "read", "write";
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA194_SID_PCIE4>;
+		iommu-map = <0x0 &smmu TEGRA194_SID_PCIE4 0x1000>;
+		iommu-map-mask = <0x0>;
+		dma-coherent;
 	};
 
 	pcie@14180000 {
@@ -2040,7 +2056,11 @@
 
 		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE0R &emc>,
 				<&mc TEGRA194_MEMORY_CLIENT_PCIE0W &emc>;
-		interconnect-names = "read", "write";
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA194_SID_PCIE0>;
+		iommu-map = <0x0 &smmu TEGRA194_SID_PCIE0 0x1000>;
+		iommu-map-mask = <0x0>;
+		dma-coherent;
 	};
 
 	pcie@141a0000 {
@@ -2094,7 +2114,11 @@
 
 		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE5R &emc>,
 				<&mc TEGRA194_MEMORY_CLIENT_PCIE5W &emc>;
-		interconnect-names = "read", "write";
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA194_SID_PCIE5>;
+		iommu-map = <0x0 &smmu TEGRA194_SID_PCIE5 0x1000>;
+		iommu-map-mask = <0x0>;
+		dma-coherent;
 	};
 
 	pcie_ep@14160000 {
@@ -2127,6 +2151,14 @@
 		nvidia,aspm-cmrt-us = <60>;
 		nvidia,aspm-pwr-on-t-us = <20>;
 		nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE4R &emc>,
+				<&mc TEGRA194_MEMORY_CLIENT_PCIE4W &emc>;
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA194_SID_PCIE4>;
+		iommu-map = <0x0 &smmu TEGRA194_SID_PCIE4 0x1000>;
+		iommu-map-mask = <0x0>;
+		dma-coherent;
 	};
 
 	pcie_ep@14180000 {
@@ -2159,6 +2191,14 @@
 		nvidia,aspm-cmrt-us = <60>;
 		nvidia,aspm-pwr-on-t-us = <20>;
 		nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE0R &emc>,
+				<&mc TEGRA194_MEMORY_CLIENT_PCIE0W &emc>;
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA194_SID_PCIE0>;
+		iommu-map = <0x0 &smmu TEGRA194_SID_PCIE0 0x1000>;
+		iommu-map-mask = <0x0>;
+		dma-coherent;
 	};
 
 	pcie_ep@141a0000 {
@@ -2194,6 +2234,14 @@
 		nvidia,aspm-cmrt-us = <60>;
 		nvidia,aspm-pwr-on-t-us = <20>;
 		nvidia,aspm-l0s-entrance-latency-us = <3>;
+
+		interconnects = <&mc TEGRA194_MEMORY_CLIENT_PCIE5R &emc>,
+				<&mc TEGRA194_MEMORY_CLIENT_PCIE5W &emc>;
+		interconnect-names = "dma-mem", "write";
+		iommus = <&smmu TEGRA194_SID_PCIE5>;
+		iommu-map = <0x0 &smmu TEGRA194_SID_PCIE5 0x1000>;
+		iommu-map-mask = <0x0>;
+		dma-coherent;
 	};
 
 	sram@40000000 {

arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts

@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /* Copyright (c) 2015, LGE Inc. All rights reserved.
  * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021, Petr Vorel <petr.vorel@gmail.com>
  */
 
 /dts-v1/;
@@ -9,6 +10,9 @@
 #include "pm8994.dtsi"
 #include "pmi8994.dtsi"
 
+/* cont_splash_mem has different memory mapping */
+/delete-node/ &cont_splash_mem;
+
 / {
 	model = "LG Nexus 5X";
 	compatible = "lg,bullhead", "qcom,msm8992";
@@ -17,6 +21,9 @@
 	qcom,board-id = <0xb64 0>;
 	qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
 
+	/* Bullhead firmware doesn't support PSCI */
+	/delete-node/ psci;
+
 	aliases {
 		serial0 = &blsp1_uart2;
 	};
@@ -38,6 +45,11 @@
 			ftrace-size = <0x10000>;
 			pmsg-size = <0x20000>;
 		};
+
+		cont_splash_mem: memory@3400000 {
+			reg = <0 0x03400000 0 0x1200000>;
+			no-map;
+		};
 	};
 };
 

arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts

@@ -1,12 +1,16 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /* Copyright (c) 2015, Huawei Inc. All rights reserved.
  * Copyright (c) 2016, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2021, Petr Vorel <petr.vorel@gmail.com>
  */
 
 /dts-v1/;
 
 #include "msm8994.dtsi"
 
+/* Angler's firmware does not report where the memory is allocated */
+/delete-node/ &cont_splash_mem;
+
 / {
 	model = "Huawei Nexus 6P";
 	compatible = "huawei,angler", "qcom,msm8994";

arch/arm64/boot/dts/qcom/sc7280.dtsi

@@ -200,7 +200,7 @@
 					   &BIG_CPU_SLEEP_1
 					   &CLUSTER_SLEEP_0>;
 			next-level-cache = <&L2_700>;
-			qcom,freq-domain = <&cpufreq_hw 1>;
+			qcom,freq-domain = <&cpufreq_hw 2>;
 			#cooling-cells = <2>;
 			L2_700: l2-cache {
 				compatible = "cache";

arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi

@@ -69,7 +69,7 @@
 		};
 		rmtfs_upper_guard: memory@f5d01000 {
 			no-map;
-			reg = <0 0xf5d01000 0 0x2000>;
+			reg = <0 0xf5d01000 0 0x1000>;
 		};
 
 		/*
@@ -78,7 +78,7 @@
 		 */
 		removed_region: memory@88f00000 {
 			no-map;
-			reg = <0 0x88f00000 0 0x200000>;
+			reg = <0 0x88f00000 0 0x1c00000>;
 		};
 
 		ramoops: ramoops@ac300000 {

arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts

@@ -700,7 +700,7 @@
 		left_spkr: wsa8810-left{
 			compatible = "sdw10217211000";
 			reg = <0 3>;
-			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
+			powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_HIGH>;
 			#thermal-sensor-cells = <0>;
 			sound-name-prefix = "SpkrLeft";
 			#sound-dai-cells = <0>;
@@ -708,7 +708,7 @@
 
 		right_spkr: wsa8810-right{
 			compatible = "sdw10217211000";
-			powerdown-gpios = <&wcdgpio 3 GPIO_ACTIVE_HIGH>;
+			powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_HIGH>;
 			reg = <0 4>;
 			#thermal-sensor-cells = <0>;
 			sound-name-prefix = "SpkrRight";

arch/arm64/include/asm/el2_setup.h

@@ -33,8 +33,7 @@
  * EL2.
  */
 .macro __init_el2_timers
-	mrs	x0, cnthctl_el2
-	orr	x0, x0, #3			// Enable EL1 physical timers
+	mov	x0, #3				// Enable EL1 physical timers
 	msr	cnthctl_el2, x0
 	msr	cntvoff_el2, xzr		// Clear virtual offset
 .endm

arch/arm64/include/asm/page.h

@@ -41,6 +41,7 @@ void tag_clear_highpage(struct page *to);
 
 typedef struct page *pgtable_t;
 
+int pfn_valid(unsigned long pfn);
 int pfn_is_map_memory(unsigned long pfn);
 
 #include <asm/memory.h>

arch/arm64/include/asm/ptrace.h

@@ -320,7 +320,17 @@ static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
 
 static inline unsigned long regs_return_value(struct pt_regs *regs)
 {
-	return regs->regs[0];
+	unsigned long val = regs->regs[0];
+
+	/*
+	 * Audit currently uses regs_return_value() instead of
+	 * syscall_get_return_value(). Apply the same sign-extension here until
+	 * audit is updated to use syscall_get_return_value().
+	 */
+	if (compat_user_mode(regs))
+		val = sign_extend64(val, 31);
+
+	return val;
 }
 
 static inline void regs_set_return_value(struct pt_regs *regs, unsigned long rc)

arch/arm64/include/asm/stacktrace.h

@@ -35,7 +35,7 @@ struct stack_info {
  * accounting information necessary for robust unwinding.
  *
  * @fp:          The fp value in the frame record (or the real fp)
- * @pc:          The fp value in the frame record (or the real lr)
+ * @pc:          The lr value in the frame record (or the real lr)
  *
  * @stacks_done: Stacks which have been entirely unwound, for which it is no
  *               longer valid to unwind to.

arch/arm64/include/asm/syscall.h

@@ -29,24 +29,25 @@ static inline void syscall_rollback(struct task_struct *task,
 	regs->regs[0] = regs->orig_x0;
 }
 
+static inline long syscall_get_return_value(struct task_struct *task,
+					    struct pt_regs *regs)
+{
+	unsigned long val = regs->regs[0];
+
+	if (is_compat_thread(task_thread_info(task)))
+		val = sign_extend64(val, 31);
+
+	return val;
+}
 
 static inline long syscall_get_error(struct task_struct *task,
 				     struct pt_regs *regs)
 {
-	unsigned long error = regs->regs[0];
-
-	if (is_compat_thread(task_thread_info(task)))
-		error = sign_extend64(error, 31);
+	unsigned long error = syscall_get_return_value(task, regs);
 
 	return IS_ERR_VALUE(error) ? error : 0;
 }
 
-static inline long syscall_get_return_value(struct task_struct *task,
-					    struct pt_regs *regs)
-{
-	return regs->regs[0];
-}
-
 static inline void syscall_set_return_value(struct task_struct *task,
 					    struct pt_regs *regs,
 					    int error, long val)

arch/arm64/kernel/kaslr.c

@@ -162,7 +162,9 @@ u64 __init kaslr_early_init(void)
 		 * a PAGE_SIZE multiple in the range [_etext - MODULES_VSIZE,
 		 * _stext) . This guarantees that the resulting region still
 		 * covers [_stext, _etext], and that all relative branches can
-		 * be resolved without veneers.
+		 * be resolved without veneers unless this region is exhausted
+		 * and we fall back to a larger 2GB window in module_alloc()
+		 * when ARM64_MODULE_PLTS is enabled.
 		 */
 		module_range = MODULES_VSIZE - (u64)(_etext - _stext);
 		module_alloc_base = (u64)_etext + offset - MODULES_VSIZE;

arch/arm64/kernel/ptrace.c

@@ -1862,7 +1862,7 @@ void syscall_trace_exit(struct pt_regs *regs)
 	audit_syscall_exit(regs);
 
 	if (flags & _TIF_SYSCALL_TRACEPOINT)
-		trace_sys_exit(regs, regs_return_value(regs));
+		trace_sys_exit(regs, syscall_get_return_value(current, regs));
 
 	if (flags & (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP))
 		tracehook_report_syscall(regs, PTRACE_SYSCALL_EXIT);

arch/arm64/kernel/signal.c

@@ -29,6 +29,7 @@
 #include <asm/unistd.h>
 #include <asm/fpsimd.h>
 #include <asm/ptrace.h>
+#include <asm/syscall.h>
 #include <asm/signal32.h>
 #include <asm/traps.h>
 #include <asm/vdso.h>
@@ -890,7 +891,7 @@ static void do_signal(struct pt_regs *regs)
 		     retval == -ERESTART_RESTARTBLOCK ||
 		     (retval == -ERESTARTSYS &&
 		      !(ksig.ka.sa.sa_flags & SA_RESTART)))) {
-			regs->regs[0] = -EINTR;
+			syscall_set_return_value(current, regs, -EINTR, 0);
 			regs->pc = continue_addr;
 		}
 

arch/arm64/kernel/stacktrace.c

@@ -218,7 +218,7 @@ void show_stack(struct task_struct *tsk, unsigned long *sp, const char *loglvl)
 
 #ifdef CONFIG_STACKTRACE
 
-noinline void arch_stack_walk(stack_trace_consume_fn consume_entry,
+noinline notrace void arch_stack_walk(stack_trace_consume_fn consume_entry,
 			      void *cookie, struct task_struct *task,
 			      struct pt_regs *regs)
 {

arch/arm64/kernel/syscall.c

@@ -54,10 +54,7 @@ static void invoke_syscall(struct pt_regs *regs, unsigned int scno,
 		ret = do_ni_syscall(regs, scno);
 	}
 
-	if (is_compat_task())
-		ret = lower_32_bits(ret);
-
-	regs->regs[0] = ret;
+	syscall_set_return_value(current, regs, 0, ret);
 
 	/*
 	 * Ultimately, this value will get limited by KSTACK_OFFSET_MAX(),
@@ -115,7 +112,7 @@ static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr,
 		 * syscall. do_notify_resume() will send a signal to userspace
 		 * before the syscall is restarted.
 		 */
-		regs->regs[0] = -ERESTARTNOINTR;
+		syscall_set_return_value(current, regs, -ERESTARTNOINTR, 0);
 		return;
 	}
 
@@ -136,7 +133,7 @@ static void el0_svc_common(struct pt_regs *regs, int scno, int sc_nr,
 		 * anyway.
 		 */
 		if (scno == NO_SYSCALL)
-			regs->regs[0] = -ENOSYS;
+			syscall_set_return_value(current, regs, -ENOSYS, 0);
 		scno = syscall_trace_enter(regs);
 		if (scno == NO_SYSCALL)
 			goto trace_exit;

arch/arm64/kvm/arm.c

@@ -94,10 +94,14 @@ int kvm_vm_ioctl_enable_cap(struct kvm *kvm,
 		kvm->arch.return_nisv_io_abort_to_user = true;
 		break;
 	case KVM_CAP_ARM_MTE:
-		if (!system_supports_mte() || kvm->created_vcpus)
-			return -EINVAL;
-		r = 0;
-		kvm->arch.mte_enabled = true;
+		mutex_lock(&kvm->lock);
+		if (!system_supports_mte() || kvm->created_vcpus) {
+			r = -EINVAL;
+		} else {
+			r = 0;
+			kvm->arch.mte_enabled = true;
+		}
+		mutex_unlock(&kvm->lock);
 		break;
 	default:
 		r = -EINVAL;

arch/arm64/kvm/hyp/nvhe/mem_protect.c

@@ -193,7 +193,7 @@ static bool range_is_memory(u64 start, u64 end)
 {
 	struct kvm_mem_range r1, r2;
 
-	if (!find_mem_range(start, &r1) || !find_mem_range(end, &r2))
+	if (!find_mem_range(start, &r1) || !find_mem_range(end - 1, &r2))
 		return false;
 	if (r1.start != r2.start)
 		return false;

arch/arm64/kvm/mmu.c

@@ -947,7 +947,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 		vma_shift = get_vma_page_shift(vma, hva);
 	}
 
-	shared = (vma->vm_flags & VM_PFNMAP);
+	shared = (vma->vm_flags & VM_SHARED);
 
 	switch (vma_shift) {
 #ifndef __PAGETABLE_PMD_FOLDED

arch/arm64/mm/init.c

@@ -219,6 +219,43 @@ static void __init zone_sizes_init(unsigned long min, unsigned long max)
 	free_area_init(max_zone_pfns);
 }
 
+int pfn_valid(unsigned long pfn)
+{
+	phys_addr_t addr = PFN_PHYS(pfn);
+	struct mem_section *ms;
+
+	/*
+	 * Ensure the upper PAGE_SHIFT bits are clear in the
+	 * pfn. Else it might lead to false positives when
+	 * some of the upper bits are set, but the lower bits
+	 * match a valid pfn.
+	 */
+	if (PHYS_PFN(addr) != pfn)
+		return 0;
+
+	if (pfn_to_section_nr(pfn) >= NR_MEM_SECTIONS)
+		return 0;
+
+	ms = __pfn_to_section(pfn);
+	if (!valid_section(ms))
+		return 0;
+
+	/*
+	 * ZONE_DEVICE memory does not have the memblock entries.
+	 * memblock_is_map_memory() check for ZONE_DEVICE based
+	 * addresses will always fail. Even the normal hotplugged
+	 * memory will never have MEMBLOCK_NOMAP flag set in their
+	 * memblock entries. Skip memblock search for all non early
+	 * memory sections covering all of hotplug memory including
+	 * both normal and ZONE_DEVICE based.
+	 */
+	if (!early_section(ms))
+		return pfn_section_valid(ms, pfn);
+
+	return memblock_is_memory(addr);
+}
+EXPORT_SYMBOL(pfn_valid);
+
 int pfn_is_map_memory(unsigned long pfn)
 {
 	phys_addr_t addr = PFN_PHYS(pfn);

arch/arm64/net/bpf_jit_comp.c

@@ -823,6 +823,19 @@ emit_cond_jmp:
 			return ret;
 		break;
 
+	/* speculation barrier */
+	case BPF_ST | BPF_NOSPEC:
+		/*
+		 * Nothing required here.
+		 *
+		 * In case of arm64, we rely on the firmware mitigation of
+		 * Speculative Store Bypass as controlled via the ssbd kernel
+		 * parameter. Whenever the mitigation is enabled, it works
+		 * for all of the kernel code with no need to provide any
+		 * additional instructions.
+		 */
+		break;
+
 	/* ST: *(size *)(dst + off) = imm */
 	case BPF_ST | BPF_MEM | BPF_W:
 	case BPF_ST | BPF_MEM | BPF_H:

arch/h8300/Kconfig.cpu

@@ -44,7 +44,6 @@ config H8300_H8MAX
 	bool "H8MAX"
 	select H83069
 	select RAMKERNEL
-	select HAVE_IDE
 	help
 	  H8MAX Evaluation Board Support
 	  More Information. (Japanese Only)

arch/ia64/Kconfig

@@ -25,7 +25,6 @@ config IA64
 	select HAVE_ASM_MODVERSIONS
 	select HAVE_UNSTABLE_SCHED_CLOCK
 	select HAVE_EXIT_THREAD
-	select HAVE_IDE
 	select HAVE_KPROBES
 	select HAVE_KRETPROBES
 	select HAVE_FTRACE_MCOUNT_RECORD

arch/m68k/Kconfig

@@ -23,7 +23,6 @@ config M68K
 	select HAVE_DEBUG_BUGVERBOSE
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS if !CPU_HAS_NO_UNALIGNED
 	select HAVE_FUTEX_CMPXCHG if MMU && FUTEX
-	select HAVE_IDE
 	select HAVE_MOD_ARCH_SPECIFIC
 	select HAVE_UID16
 	select MMU_GATHER_NO_RANGE if MMU

arch/m68k/coldfire/m525x.c

@@ -26,7 +26,7 @@ DEFINE_CLK(pll, "pll.0", MCF_CLK);
 DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
 
 static struct clk_lookup m525x_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "pll.0", &pll),
+	CLKDEV_INIT(NULL, "pll.0", &clk_pll),
 	CLKDEV_INIT(NULL, "sys.0", &clk_sys),
 	CLKDEV_INIT("mcftmr.0", NULL, &clk_sys),
 	CLKDEV_INIT("mcftmr.1", NULL, &clk_sys),

arch/mips/Kconfig

@@ -71,7 +71,6 @@ config MIPS
 	select HAVE_FUNCTION_TRACER
 	select HAVE_GCC_PLUGINS
 	select HAVE_GENERIC_VDSO
-	select HAVE_IDE
 	select HAVE_IOREMAP_PROT
 	select HAVE_IRQ_EXIT_ON_IRQ_STACK
 	select HAVE_IRQ_TIME_ACCOUNTING

arch/mips/Makefile

@@ -321,7 +321,7 @@ KBUILD_LDFLAGS		+= -m $(ld-emul)
 
 ifdef CONFIG_MIPS
 CHECKFLAGS += $(shell $(CC) $(KBUILD_CFLAGS) -dM -E -x c /dev/null | \
-	egrep -vw '__GNUC_(|MINOR_|PATCHLEVEL_)_' | \
+	egrep -vw '__GNUC_(MINOR_|PATCHLEVEL_)?_' | \
 	sed -e "s/^\#define /-D'/" -e "s/ /'='/" -e "s/$$/'/" -e 's/\$$/&&/g')
 endif
 

arch/mips/include/asm/pgalloc.h

@@ -58,15 +58,20 @@ do {							\
 
 static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
 {
-	pmd_t *pmd = NULL;
+	pmd_t *pmd;
 	struct page *pg;
 
-	pg = alloc_pages(GFP_KERNEL | __GFP_ACCOUNT, PMD_ORDER);
-	if (pg) {
-		pgtable_pmd_page_ctor(pg);
-		pmd = (pmd_t *)page_address(pg);
-		pmd_init((unsigned long)pmd, (unsigned long)invalid_pte_table);
+	pg = alloc_pages(GFP_KERNEL_ACCOUNT, PMD_ORDER);
+	if (!pg)
+		return NULL;
+
+	if (!pgtable_pmd_page_ctor(pg)) {
+		__free_pages(pg, PMD_ORDER);
+		return NULL;
 	}
+
+	pmd = (pmd_t *)page_address(pg);
+	pmd_init((unsigned long)pmd, (unsigned long)invalid_pte_table);
 	return pmd;
 }
 

arch/mips/mti-malta/malta-platform.c

@@ -48,7 +48,8 @@ static struct plat_serial8250_port uart8250_data[] = {
 		.mapbase	= 0x1f000900,	/* The CBUS UART */
 		.irq		= MIPS_CPU_IRQ_BASE + MIPSCPU_INT_MB2,
 		.uartclk	= 3686400,	/* Twice the usual clk! */
-		.iotype		= UPIO_MEM32,
+		.iotype		= IS_ENABLED(CONFIG_CPU_BIG_ENDIAN) ?
+				  UPIO_MEM32BE : UPIO_MEM32,
 		.flags		= CBUS_UART_FLAGS,
 		.regshift	= 3,
 	},

arch/mips/net/ebpf_jit.c

@@ -1355,6 +1355,9 @@ jeq_common:
 		}
 		break;
 
+	case BPF_ST | BPF_NOSPEC: /* speculation barrier */
+		break;
+
 	case BPF_ST | BPF_B | BPF_MEM:
 	case BPF_ST | BPF_H | BPF_MEM:
 	case BPF_ST | BPF_W | BPF_MEM:

arch/parisc/Kconfig

@@ -3,7 +3,6 @@ config PARISC
 	def_bool y
 	select ARCH_32BIT_OFF_T if !64BIT
 	select ARCH_MIGHT_HAVE_PC_PARPORT
-	select HAVE_IDE
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_SYSCALL_TRACEPOINTS

arch/parisc/include/asm/string.h

@@ -8,19 +8,4 @@ extern void * memset(void *, int, size_t);
 #define __HAVE_ARCH_MEMCPY
 void * memcpy(void * dest,const void *src,size_t count);
 
-#define __HAVE_ARCH_STRLEN
-extern size_t strlen(const char *s);
-
-#define __HAVE_ARCH_STRCPY
-extern char *strcpy(char *dest, const char *src);
-
-#define __HAVE_ARCH_STRNCPY
-extern char *strncpy(char *dest, const char *src, size_t count);
-
-#define __HAVE_ARCH_STRCAT
-extern char *strcat(char *dest, const char *src);
-
-#define __HAVE_ARCH_MEMSET
-extern void *memset(void *, int, size_t);
-
 #endif

arch/parisc/kernel/parisc_ksyms.c

@@ -17,10 +17,6 @@
 
 #include <linux/string.h>
 EXPORT_SYMBOL(memset);
-EXPORT_SYMBOL(strlen);
-EXPORT_SYMBOL(strcpy);
-EXPORT_SYMBOL(strncpy);
-EXPORT_SYMBOL(strcat);
 
 #include <linux/atomic.h>
 EXPORT_SYMBOL(__xchg8);

arch/parisc/lib/Makefile

@@ -3,7 +3,7 @@
 # Makefile for parisc-specific library files
 #
 
-lib-y	:= lusercopy.o bitops.o checksum.o io.o memcpy.o \
-	   ucmpdi2.o delay.o string.o
+lib-y	:= lusercopy.o bitops.o checksum.o io.o memset.o memcpy.o \
+	   ucmpdi2.o delay.o
 
 obj-y	:= iomap.o

arch/parisc/lib/memset.c

@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+#include <linux/types.h>
+#include <asm/string.h>
+
+#define OPSIZ (BITS_PER_LONG/8)
+typedef unsigned long op_t;
+
+void *
+memset (void *dstpp, int sc, size_t len)
+{
+  unsigned int c = sc;
+  long int dstp = (long int) dstpp;
+
+  if (len >= 8)
+    {
+      size_t xlen;
+      op_t cccc;
+
+      cccc = (unsigned char) c;
+      cccc |= cccc << 8;
+      cccc |= cccc << 16;
+      if (OPSIZ > 4)
+	/* Do the shift in two steps to avoid warning if long has 32 bits.  */
+	cccc |= (cccc << 16) << 16;
+
+      /* There are at least some bytes to set.
+	 No need to test for LEN == 0 in this alignment loop.  */
+      while (dstp % OPSIZ != 0)
+	{
+	  ((unsigned char *) dstp)[0] = c;
+	  dstp += 1;
+	  len -= 1;
+	}
+
+      /* Write 8 `op_t' per iteration until less than 8 `op_t' remain.  */
+      xlen = len / (OPSIZ * 8);
+      while (xlen > 0)
+	{
+	  ((op_t *) dstp)[0] = cccc;
+	  ((op_t *) dstp)[1] = cccc;
+	  ((op_t *) dstp)[2] = cccc;
+	  ((op_t *) dstp)[3] = cccc;
+	  ((op_t *) dstp)[4] = cccc;
+	  ((op_t *) dstp)[5] = cccc;
+	  ((op_t *) dstp)[6] = cccc;
+	  ((op_t *) dstp)[7] = cccc;
+	  dstp += 8 * OPSIZ;
+	  xlen -= 1;
+	}
+      len %= OPSIZ * 8;
+
+      /* Write 1 `op_t' per iteration until less than OPSIZ bytes remain.  */
+      xlen = len / OPSIZ;
+      while (xlen > 0)
+	{
+	  ((op_t *) dstp)[0] = cccc;
+	  dstp += OPSIZ;
+	  xlen -= 1;
+	}
+      len %= OPSIZ;
+    }
+
+  /* Write the last few bytes.  */
+  while (len > 0)
+    {
+      ((unsigned char *) dstp)[0] = c;
+      dstp += 1;
+      len -= 1;
+    }
+
+  return dstpp;
+}

arch/parisc/lib/string.S

@@ -1,136 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- *    PA-RISC assembly string functions
- *
- *    Copyright (C) 2019 Helge Deller <deller@gmx.de>
- */
-
-#include <asm/assembly.h>
-#include <linux/linkage.h>
-
-	.section .text.hot
-	.level PA_ASM_LEVEL
-
-	t0 = r20
-	t1 = r21
-	t2 = r22
-
-ENTRY_CFI(strlen, frame=0,no_calls)
-	or,COND(<>) arg0,r0,ret0
-	b,l,n	.Lstrlen_null_ptr,r0
-	depwi	0,31,2,ret0
-	cmpb,COND(<>) arg0,ret0,.Lstrlen_not_aligned
-	ldw,ma	4(ret0),t0
-	cmpib,tr 0,r0,.Lstrlen_loop
-	uxor,nbz r0,t0,r0
-.Lstrlen_not_aligned:
-	uaddcm	arg0,ret0,t1
-	shladd	t1,3,r0,t1
-	mtsar	t1
-	depwi	-1,%sar,32,t0
-	uxor,nbz r0,t0,r0
-.Lstrlen_loop:
-	b,l,n	.Lstrlen_end_loop,r0
-	ldw,ma	4(ret0),t0
-	cmpib,tr 0,r0,.Lstrlen_loop
-	uxor,nbz r0,t0,r0
-.Lstrlen_end_loop:
-	extrw,u,<> t0,7,8,r0
-	addib,tr,n -3,ret0,.Lstrlen_out
-	extrw,u,<> t0,15,8,r0
-	addib,tr,n -2,ret0,.Lstrlen_out
-	extrw,u,<> t0,23,8,r0
-	addi	-1,ret0,ret0
-.Lstrlen_out:
-	bv r0(rp)
-	uaddcm ret0,arg0,ret0
-.Lstrlen_null_ptr:
-	bv,n r0(rp)
-ENDPROC_CFI(strlen)
-
-
-ENTRY_CFI(strcpy, frame=0,no_calls)
-	ldb	0(arg1),t0
-	stb	t0,0(arg0)
-	ldo	0(arg0),ret0
-	ldo	1(arg1),t1
-	cmpb,=	r0,t0,2f
-	ldo	1(arg0),t2
-1:	ldb	0(t1),arg1
-	stb	arg1,0(t2)
-	ldo	1(t1),t1
-	cmpb,<> r0,arg1,1b
-	ldo	1(t2),t2
-2:	bv,n	r0(rp)
-ENDPROC_CFI(strcpy)
-
-
-ENTRY_CFI(strncpy, frame=0,no_calls)
-	ldb	0(arg1),t0
-	stb	t0,0(arg0)
-	ldo	1(arg1),t1
-	ldo	0(arg0),ret0
-	cmpb,=	r0,t0,2f
-	ldo	1(arg0),arg1
-1:	ldo	-1(arg2),arg2
-	cmpb,COND(=),n r0,arg2,2f
-	ldb	0(t1),arg0
-	stb	arg0,0(arg1)
-	ldo	1(t1),t1
-	cmpb,<> r0,arg0,1b
-	ldo	1(arg1),arg1
-2:	bv,n	r0(rp)
-ENDPROC_CFI(strncpy)
-
-
-ENTRY_CFI(strcat, frame=0,no_calls)
-	ldb	0(arg0),t0
-	cmpb,=	t0,r0,2f
-	ldo	0(arg0),ret0
-	ldo	1(arg0),arg0
-1:	ldb	0(arg0),t1
-	cmpb,<>,n r0,t1,1b
-	ldo	1(arg0),arg0
-2:	ldb	0(arg1),t2
-	stb	t2,0(arg0)
-	ldo	1(arg0),arg0
-	ldb	0(arg1),t0
-	cmpb,<>	r0,t0,2b
-	ldo	1(arg1),arg1
-	bv,n	r0(rp)
-ENDPROC_CFI(strcat)
-
-
-ENTRY_CFI(memset, frame=0,no_calls)
-	copy	arg0,ret0
-	cmpb,COND(=) r0,arg0,4f
-	copy	arg0,t2
-	cmpb,COND(=) r0,arg2,4f
-	ldo	-1(arg2),arg3
-	subi	-1,arg3,t0
-	subi	0,t0,t1
-	cmpiclr,COND(>=) 0,t1,arg2
-	ldo	-1(t1),arg2
-	extru arg2,31,2,arg0
-2:	stb	arg1,0(t2)
-	ldo	1(t2),t2
-	addib,>= -1,arg0,2b
-	ldo	-1(arg3),arg3
-	cmpiclr,COND(<=) 4,arg2,r0
-	b,l,n	4f,r0
-#ifdef CONFIG_64BIT
-	depd,*	r0,63,2,arg2
-#else
-	depw	r0,31,2,arg2
-#endif
-	ldo	1(t2),t2
-3:	stb	arg1,-1(t2)
-	stb	arg1,0(t2)
-	stb	arg1,1(t2)
-	stb	arg1,2(t2)
-	addib,COND(>) -4,arg2,3b
-	ldo	4(t2),t2
-4:	bv,n	r0(rp)
-ENDPROC_CFI(memset)
-
-	.end

arch/powerpc/Kconfig

@@ -220,7 +220,6 @@ config PPC
 	select HAVE_HARDLOCKUP_DETECTOR_ARCH	if PPC_BOOK3S_64 && SMP
 	select HAVE_HARDLOCKUP_DETECTOR_PERF	if PERF_EVENTS && HAVE_PERF_EVENTS_NMI && !HAVE_HARDLOCKUP_DETECTOR_ARCH
 	select HAVE_HW_BREAKPOINT		if PERF_EVENTS && (PPC_BOOK3S || PPC_8xx)
-	select HAVE_IDE
 	select HAVE_IOREMAP_PROT
 	select HAVE_IRQ_EXIT_ON_IRQ_STACK
 	select HAVE_IRQ_TIME_ACCOUNTING