Linux 5.0

Pull ARM SoC fixes from Arnd Bergmann:
 "One more set of simple ARM platform fixes:

   - A boot regression on qualcomm msm8998

   - Gemini display controllers got turned off by accident

   - incorrect reference counting in optee"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  tee: optee: add missing of_node_put after of_device_is_available
  arm64: dts: qcom: msm8998: Extend TZ reserved memory area
  ARM: dts: gemini: Re-enable display controller

CREDITS

@@ -842,10 +842,9 @@ D: ax25-utils maintainer.
 
 N: Helge Deller
 E: deller@gmx.de
-E: hdeller@redhat.de
-D: PA-RISC Linux hacker, LASI-, ASP-, WAX-, LCD/LED-driver
-S: Schimmelsrain 1
-S: D-69231 Rauenberg
+W: http://www.parisc-linux.org/
+D: PA-RISC Linux architecture maintainer
+D: LASI-, ASP-, WAX-, LCD/LED-driver
 S: Germany
 
 N: Jean Delvare
@@ -1361,7 +1360,7 @@ S: Stellenbosch, Western Cape
 S: South Africa
 
 N: Grant Grundler
-E: grundler@parisc-linux.org
+E: grantgrundler@gmail.com
 W: http://obmouse.sourceforge.net/
 W: http://www.parisc-linux.org/
 D: obmouse - rewrote Olivier Florent's Omnibook 600 "pop-up" mouse driver
@@ -2492,7 +2491,7 @@ S: Syracuse, New York 13206
 S: USA
 
 N: Kyle McMartin
-E: kyle@parisc-linux.org
+E: kyle@mcmartin.ca
 D: Linux/PARISC hacker
 D: AD1889 sound driver
 S: Ottawa, Canada
@@ -3780,14 +3779,13 @@ S: 21513 Conradia Ct
 S: Cupertino, CA 95014
 S: USA
 
-N: Thibaut Varene
-E: T-Bone@parisc-linux.org
-W: http://www.parisc-linux.org/~varenet/
-P: 1024D/B7D2F063 E67C 0D43 A75E 12A5 BB1C  FA2F 1E32 C3DA B7D2 F063
+N: Thibaut Varène
+E: hacks+kernel@slashdirt.org
+W: http://hacks.slashdirt.org/
 D: PA-RISC port minion, PDC and GSCPS2 drivers, debuglocks and other bits
 D: Some ARM at91rm9200 bits, S1D13XXX FB driver, random patches here and there
 D: AD1889 sound driver
-S: Paris, France
+S: France
 
 N: Heikki Vatiainen
 E: hessu@cs.tut.fi

Documentation/admin-guide/README.rst

@@ -1,9 +1,9 @@
 .. _readme:
 
-Linux kernel release 4.x <http://kernel.org/>
+Linux kernel release 5.x <http://kernel.org/>
 =============================================
 
-These are the release notes for Linux version 4.  Read them carefully,
+These are the release notes for Linux version 5.  Read them carefully,
 as they tell you what this is all about, explain how to install the
 kernel, and what to do if something goes wrong.
 
@@ -63,7 +63,7 @@ Installing the kernel source
    directory where you have permissions (e.g. your home directory) and
    unpack it::
 
-     xz -cd linux-4.X.tar.xz | tar xvf -
+     xz -cd linux-5.x.tar.xz | tar xvf -
 
    Replace "X" with the version number of the latest kernel.
 
@@ -72,26 +72,26 @@ Installing the kernel source
    files.  They should match the library, and not get messed up by
    whatever the kernel-du-jour happens to be.
 
- - You can also upgrade between 4.x releases by patching.  Patches are
+ - You can also upgrade between 5.x releases by patching.  Patches are
    distributed in the xz format.  To install by patching, get all the
    newer patch files, enter the top level directory of the kernel source
-   (linux-4.X) and execute::
+   (linux-5.x) and execute::
 
-     xz -cd ../patch-4.x.xz | patch -p1
+     xz -cd ../patch-5.x.xz | patch -p1
 
-   Replace "x" for all versions bigger than the version "X" of your current
+   Replace "x" for all versions bigger than the version "x" of your current
    source tree, **in_order**, and you should be ok.  You may want to remove
    the backup files (some-file-name~ or some-file-name.orig), and make sure
    that there are no failed patches (some-file-name# or some-file-name.rej).
    If there are, either you or I have made a mistake.
 
-   Unlike patches for the 4.x kernels, patches for the 4.x.y kernels
+   Unlike patches for the 5.x kernels, patches for the 5.x.y kernels
    (also known as the -stable kernels) are not incremental but instead apply
-   directly to the base 4.x kernel.  For example, if your base kernel is 4.0
-   and you want to apply the 4.0.3 patch, you must not first apply the 4.0.1
-   and 4.0.2 patches. Similarly, if you are running kernel version 4.0.2 and
-   want to jump to 4.0.3, you must first reverse the 4.0.2 patch (that is,
-   patch -R) **before** applying the 4.0.3 patch. You can read more on this in
+   directly to the base 5.x kernel.  For example, if your base kernel is 5.0
+   and you want to apply the 5.0.3 patch, you must not first apply the 5.0.1
+   and 5.0.2 patches. Similarly, if you are running kernel version 5.0.2 and
+   want to jump to 5.0.3, you must first reverse the 5.0.2 patch (that is,
+   patch -R) **before** applying the 5.0.3 patch. You can read more on this in
    :ref:`Documentation/process/applying-patches.rst <applying_patches>`.
 
    Alternatively, the script patch-kernel can be used to automate this
@@ -114,7 +114,7 @@ Installing the kernel source
 Software requirements
 ---------------------
 
-   Compiling and running the 4.x kernels requires up-to-date
+   Compiling and running the 5.x kernels requires up-to-date
    versions of various software packages.  Consult
    :ref:`Documentation/process/changes.rst <changes>` for the minimum version numbers
    required and how to get updates for these packages.  Beware that using
@@ -132,12 +132,12 @@ Build directory for the kernel
    place for the output files (including .config).
    Example::
 
-     kernel source code: /usr/src/linux-4.X
+     kernel source code: /usr/src/linux-5.x
      build directory:    /home/name/build/kernel
 
    To configure and build the kernel, use::
 
-     cd /usr/src/linux-4.X
+     cd /usr/src/linux-5.x
      make O=/home/name/build/kernel menuconfig
      make O=/home/name/build/kernel
      sudo make O=/home/name/build/kernel modules_install install

Documentation/networking/dsa/dsa.txt

@@ -533,16 +533,12 @@ Bridge VLAN filtering
   function that the driver has to call for each VLAN the given port is a member
   of. A switchdev object is used to carry the VID and bridge flags.
 
-- port_fdb_prepare: bridge layer function invoked when the bridge prepares the
-  installation of a Forwarding Database entry. If the operation is not
-  supported, this function should return -EOPNOTSUPP to inform the bridge code
-  to fallback to a software implementation. No hardware setup must be done in
-  this function. See port_fdb_add for this and details.
-
 - port_fdb_add: bridge layer function invoked when the bridge wants to install a
   Forwarding Database entry, the switch hardware should be programmed with the
   specified address in the specified VLAN Id in the forwarding database
-  associated with this VLAN ID
+  associated with this VLAN ID. If the operation is not supported, this
+  function should return -EOPNOTSUPP to inform the bridge code to fallback to
+  a software implementation.
 
 Note: VLAN ID 0 corresponds to the port private database, which, in the context
 of DSA, would be the its port-based VLAN, used by the associated bridge device.

Documentation/networking/msg_zerocopy.rst

@@ -7,7 +7,7 @@ Intro
 =====
 
 The MSG_ZEROCOPY flag enables copy avoidance for socket send calls.
-The feature is currently implemented for TCP sockets.
+The feature is currently implemented for TCP and UDP sockets.
 
 
 Opportunity and Caveats

Documentation/networking/switchdev.txt

@@ -92,11 +92,11 @@ device.
 Switch ID
 ^^^^^^^^^
 
-The switchdev driver must implement the switchdev op switchdev_port_attr_get
-for SWITCHDEV_ATTR_ID_PORT_PARENT_ID for each port netdev, returning the same
-physical ID for each port of a switch.  The ID must be unique between switches
-on the same system.  The ID does not need to be unique between switches on
-different systems.
+The switchdev driver must implement the net_device operation
+ndo_get_port_parent_id for each port netdev, returning the same physical ID for
+each port of a switch. The ID must be unique between switches on the same
+system. The ID does not need to be unique between switches on different
+systems.
 
 The switch ID is used to locate ports on a switch and to know if aggregated
 ports belong to the same switch.

Documentation/process/applying-patches.rst

@@ -216,14 +216,14 @@ You can use the ``interdiff`` program (http://cyberelk.net/tim/patchutils/) to
 generate a patch representing the differences between two patches and then
 apply the result.
 
-This will let you move from something like 4.7.2 to 4.7.3 in a single
+This will let you move from something like 5.7.2 to 5.7.3 in a single
 step. The -z flag to interdiff will even let you feed it patches in gzip or
 bzip2 compressed form directly without the use of zcat or bzcat or manual
 decompression.
 
-Here's how you'd go from 4.7.2 to 4.7.3 in a single step::
+Here's how you'd go from 5.7.2 to 5.7.3 in a single step::
 
-	interdiff -z ../patch-4.7.2.gz ../patch-4.7.3.gz | patch -p1
+	interdiff -z ../patch-5.7.2.gz ../patch-5.7.3.gz | patch -p1
 
 Although interdiff may save you a step or two you are generally advised to
 do the additional steps since interdiff can get things wrong in some cases.
@@ -245,62 +245,67 @@ The patches are available at http://kernel.org/
 Most recent patches are linked from the front page, but they also have
 specific homes.
 
-The 4.x.y (-stable) and 4.x patches live at
+The 5.x.y (-stable) and 5.x patches live at
 
-	https://www.kernel.org/pub/linux/kernel/v4.x/
+	https://www.kernel.org/pub/linux/kernel/v5.x/
 
-The -rc patches live at
+The -rc patches are not stored on the webserver but are generated on
+demand from git tags such as
 
-	https://www.kernel.org/pub/linux/kernel/v4.x/testing/
+	https://git.kernel.org/torvalds/p/v5.1-rc1/v5.0
+
+The stable -rc patches live at
+
+	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/
 
 
-The 4.x kernels
+The 5.x kernels
 ===============
 
 These are the base stable releases released by Linus. The highest numbered
 release is the most recent.
 
 If regressions or other serious flaws are found, then a -stable fix patch
-will be released (see below) on top of this base. Once a new 4.x base
+will be released (see below) on top of this base. Once a new 5.x base
 kernel is released, a patch is made available that is a delta between the
-previous 4.x kernel and the new one.
+previous 5.x kernel and the new one.
 
-To apply a patch moving from 4.6 to 4.7, you'd do the following (note
-that such patches do **NOT** apply on top of 4.x.y kernels but on top of the
-base 4.x kernel -- if you need to move from 4.x.y to 4.x+1 you need to
-first revert the 4.x.y patch).
+To apply a patch moving from 5.6 to 5.7, you'd do the following (note
+that such patches do **NOT** apply on top of 5.x.y kernels but on top of the
+base 5.x kernel -- if you need to move from 5.x.y to 5.x+1 you need to
+first revert the 5.x.y patch).
 
 Here are some examples::
 
-	# moving from 4.6 to 4.7
+	# moving from 5.6 to 5.7
 
-	$ cd ~/linux-4.6		# change to kernel source dir
-	$ patch -p1 < ../patch-4.7	# apply the 4.7 patch
+	$ cd ~/linux-5.6		# change to kernel source dir
+	$ patch -p1 < ../patch-5.7	# apply the 5.7 patch
 	$ cd ..
-	$ mv linux-4.6 linux-4.7	# rename source dir
+	$ mv linux-5.6 linux-5.7	# rename source dir
 
-	# moving from 4.6.1 to 4.7
+	# moving from 5.6.1 to 5.7
 
-	$ cd ~/linux-4.6.1		# change to kernel source dir
-	$ patch -p1 -R < ../patch-4.6.1	# revert the 4.6.1 patch
-					# source dir is now 4.6
-	$ patch -p1 < ../patch-4.7	# apply new 4.7 patch
+	$ cd ~/linux-5.6.1		# change to kernel source dir
+	$ patch -p1 -R < ../patch-5.6.1	# revert the 5.6.1 patch
+					# source dir is now 5.6
+	$ patch -p1 < ../patch-5.7	# apply new 5.7 patch
 	$ cd ..
-	$ mv linux-4.6.1 linux-4.7	# rename source dir
+	$ mv linux-5.6.1 linux-5.7	# rename source dir
 
 
-The 4.x.y kernels
+The 5.x.y kernels
 =================
 
 Kernels with 3-digit versions are -stable kernels. They contain small(ish)
 critical fixes for security problems or significant regressions discovered
-in a given 4.x kernel.
+in a given 5.x kernel.
 
 This is the recommended branch for users who want the most recent stable
 kernel and are not interested in helping test development/experimental
 versions.
 
-If no 4.x.y kernel is available, then the highest numbered 4.x kernel is
+If no 5.x.y kernel is available, then the highest numbered 5.x kernel is
 the current stable kernel.
 
 .. note::
@@ -308,23 +313,23 @@ the current stable kernel.
  The -stable team usually do make incremental patches available as well
  as patches against the latest mainline release, but I only cover the
  non-incremental ones below. The incremental ones can be found at
- https://www.kernel.org/pub/linux/kernel/v4.x/incr/
+ https://www.kernel.org/pub/linux/kernel/v5.x/incr/
 
-These patches are not incremental, meaning that for example the 4.7.3
-patch does not apply on top of the 4.7.2 kernel source, but rather on top
-of the base 4.7 kernel source.
+These patches are not incremental, meaning that for example the 5.7.3
+patch does not apply on top of the 5.7.2 kernel source, but rather on top
+of the base 5.7 kernel source.
 
-So, in order to apply the 4.7.3 patch to your existing 4.7.2 kernel
-source you have to first back out the 4.7.2 patch (so you are left with a
-base 4.7 kernel source) and then apply the new 4.7.3 patch.
+So, in order to apply the 5.7.3 patch to your existing 5.7.2 kernel
+source you have to first back out the 5.7.2 patch (so you are left with a
+base 5.7 kernel source) and then apply the new 5.7.3 patch.
 
 Here's a small example::
 
-	$ cd ~/linux-4.7.2		# change to the kernel source dir
-	$ patch -p1 -R < ../patch-4.7.2	# revert the 4.7.2 patch
-	$ patch -p1 < ../patch-4.7.3	# apply the new 4.7.3 patch
+	$ cd ~/linux-5.7.2		# change to the kernel source dir
+	$ patch -p1 -R < ../patch-5.7.2	# revert the 5.7.2 patch
+	$ patch -p1 < ../patch-5.7.3	# apply the new 5.7.3 patch
 	$ cd ..
-	$ mv linux-4.7.2 linux-4.7.3	# rename the kernel source dir
+	$ mv linux-5.7.2 linux-5.7.3	# rename the kernel source dir
 
 The -rc kernels
 ===============
@@ -343,38 +348,38 @@ This is a good branch to run for people who want to help out testing
 development kernels but do not want to run some of the really experimental
 stuff (such people should see the sections about -next and -mm kernels below).
 
-The -rc patches are not incremental, they apply to a base 4.x kernel, just
-like the 4.x.y patches described above. The kernel version before the -rcN
+The -rc patches are not incremental, they apply to a base 5.x kernel, just
+like the 5.x.y patches described above. The kernel version before the -rcN
 suffix denotes the version of the kernel that this -rc kernel will eventually
 turn into.
 
-So, 4.8-rc5 means that this is the fifth release candidate for the 4.8
-kernel and the patch should be applied on top of the 4.7 kernel source.
+So, 5.8-rc5 means that this is the fifth release candidate for the 5.8
+kernel and the patch should be applied on top of the 5.7 kernel source.
 
 Here are 3 examples of how to apply these patches::
 
-	# first an example of moving from 4.7 to 4.8-rc3
+	# first an example of moving from 5.7 to 5.8-rc3
 
-	$ cd ~/linux-4.7			# change to the 4.7 source dir
-	$ patch -p1 < ../patch-4.8-rc3		# apply the 4.8-rc3 patch
+	$ cd ~/linux-5.7			# change to the 5.7 source dir
+	$ patch -p1 < ../patch-5.8-rc3		# apply the 5.8-rc3 patch
 	$ cd ..
-	$ mv linux-4.7 linux-4.8-rc3		# rename the source dir
+	$ mv linux-5.7 linux-5.8-rc3		# rename the source dir
 
-	# now let's move from 4.8-rc3 to 4.8-rc5
+	# now let's move from 5.8-rc3 to 5.8-rc5
 
-	$ cd ~/linux-4.8-rc3			# change to the 4.8-rc3 dir
-	$ patch -p1 -R < ../patch-4.8-rc3	# revert the 4.8-rc3 patch
-	$ patch -p1 < ../patch-4.8-rc5		# apply the new 4.8-rc5 patch
+	$ cd ~/linux-5.8-rc3			# change to the 5.8-rc3 dir
+	$ patch -p1 -R < ../patch-5.8-rc3	# revert the 5.8-rc3 patch
+	$ patch -p1 < ../patch-5.8-rc5		# apply the new 5.8-rc5 patch
 	$ cd ..
-	$ mv linux-4.8-rc3 linux-4.8-rc5	# rename the source dir
+	$ mv linux-5.8-rc3 linux-5.8-rc5	# rename the source dir
 
-	# finally let's try and move from 4.7.3 to 4.8-rc5
+	# finally let's try and move from 5.7.3 to 5.8-rc5
 
-	$ cd ~/linux-4.7.3			# change to the kernel source dir
-	$ patch -p1 -R < ../patch-4.7.3		# revert the 4.7.3 patch
-	$ patch -p1 < ../patch-4.8-rc5		# apply new 4.8-rc5 patch
+	$ cd ~/linux-5.7.3			# change to the kernel source dir
+	$ patch -p1 -R < ../patch-5.7.3		# revert the 5.7.3 patch
+	$ patch -p1 < ../patch-5.8-rc5		# apply new 5.8-rc5 patch
 	$ cd ..
-	$ mv linux-4.7.3 linux-4.8-rc5		# rename the kernel source dir
+	$ mv linux-5.7.3 linux-5.8-rc5		# rename the kernel source dir
 
 
 The -mm patches and the linux-next tree

Documentation/translations/it_IT/admin-guide/README.rst

@@ -4,7 +4,7 @@
 
 .. _it_readme:
 
-Rilascio del kernel Linux  4.x <http://kernel.org/>
+Rilascio del kernel Linux  5.x <http://kernel.org/>
 ===================================================
 
 .. warning::

MAINTAINERS

@@ -409,8 +409,7 @@ F:	drivers/platform/x86/wmi.c
 F:	include/uapi/linux/wmi.h
 
 AD1889 ALSA SOUND DRIVER
-M:	Thibaut Varene <T-Bone@parisc-linux.org>
-W:	http://wiki.parisc-linux.org/AD1889
+W:	https://parisc.wiki.kernel.org/index.php/AD1889
 L:	linux-parisc@vger.kernel.org
 S:	Maintained
 F:	sound/pci/ad1889.*
@@ -2852,7 +2851,7 @@ R:	Martin KaFai Lau <kafai@fb.com>
 R:	Song Liu <songliubraving@fb.com>
 R:	Yonghong Song <yhs@fb.com>
 L:	netdev@vger.kernel.org
-L:	linux-kernel@vger.kernel.org
+L:	bpf@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git
 Q:	https://patchwork.ozlabs.org/project/netdev/list/?delegate=77147
@@ -2882,6 +2881,7 @@ N:	bpf
 BPF JIT for ARM
 M:	Shubham Bansal <illusionist.neo@gmail.com>
 L:	netdev@vger.kernel.org
+L:	bpf@vger.kernel.org
 S:	Maintained
 F:	arch/arm/net/
 
@@ -2890,18 +2890,21 @@ M:	Daniel Borkmann <daniel@iogearbox.net>
 M:	Alexei Starovoitov <ast@kernel.org>
 M:	Zi Shen Lim <zlim.lnx@gmail.com>
 L:	netdev@vger.kernel.org
+L:	bpf@vger.kernel.org
 S:	Supported
 F:	arch/arm64/net/
 
 BPF JIT for MIPS (32-BIT AND 64-BIT)
 M:	Paul Burton <paul.burton@mips.com>
 L:	netdev@vger.kernel.org
+L:	bpf@vger.kernel.org
 S:	Maintained
 F:	arch/mips/net/
 
 BPF JIT for NFP NICs
 M:	Jakub Kicinski <jakub.kicinski@netronome.com>
 L:	netdev@vger.kernel.org
+L:	bpf@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/netronome/nfp/bpf/
 
@@ -2909,6 +2912,7 @@ BPF JIT for POWERPC (32-BIT AND 64-BIT)
 M:	Naveen N. Rao <naveen.n.rao@linux.ibm.com>
 M:	Sandipan Das <sandipan@linux.ibm.com>
 L:	netdev@vger.kernel.org
+L:	bpf@vger.kernel.org
 S:	Maintained
 F:	arch/powerpc/net/
 
@@ -2916,6 +2920,7 @@ BPF JIT for S390
 M:	Martin Schwidefsky <schwidefsky@de.ibm.com>
 M:	Heiko Carstens <heiko.carstens@de.ibm.com>
 L:	netdev@vger.kernel.org
+L:	bpf@vger.kernel.org
 S:	Maintained
 F:	arch/s390/net/
 X:	arch/s390/net/pnet.c
@@ -2923,12 +2928,14 @@ X:	arch/s390/net/pnet.c
 BPF JIT for SPARC (32-BIT AND 64-BIT)
 M:	David S. Miller <davem@davemloft.net>
 L:	netdev@vger.kernel.org
+L:	bpf@vger.kernel.org
 S:	Maintained
 F:	arch/sparc/net/
 
 BPF JIT for X86 32-BIT
 M:	Wang YanQing <udknight@gmail.com>
 L:	netdev@vger.kernel.org
+L:	bpf@vger.kernel.org
 S:	Maintained
 F:	arch/x86/net/bpf_jit_comp32.c
 
@@ -2936,6 +2943,7 @@ BPF JIT for X86 64-BIT
 M:	Alexei Starovoitov <ast@kernel.org>
 M:	Daniel Borkmann <daniel@iogearbox.net>
 L:	netdev@vger.kernel.org
+L:	bpf@vger.kernel.org
 S:	Supported
 F:	arch/x86/net/
 X:	arch/x86/net/bpf_jit_comp32.c
@@ -3390,9 +3398,8 @@ F:	Documentation/media/v4l-drivers/cafe_ccic*
 F:	drivers/media/platform/marvell-ccic/
 
 CAIF NETWORK LAYER
-M:	Dmitry Tarnyagin <dmitry.tarnyagin@lockless.no>
 L:	netdev@vger.kernel.org
-S:	Supported
+S:	Orphan
 F:	Documentation/networking/caif/
 F:	drivers/net/caif/
 F:	include/uapi/linux/caif/
@@ -8487,6 +8494,7 @@ L7 BPF FRAMEWORK
 M:	John Fastabend <john.fastabend@gmail.com>
 M:	Daniel Borkmann <daniel@iogearbox.net>
 L:	netdev@vger.kernel.org
+L:	bpf@vger.kernel.org
 S:	Maintained
 F:	include/linux/skmsg.h
 F:	net/core/skmsg.c
@@ -11488,7 +11496,7 @@ F:	Documentation/blockdev/paride.txt
 F:	drivers/block/paride/
 
 PARISC ARCHITECTURE
-M:	"James E.J. Bottomley" <jejb@parisc-linux.org>
+M:	"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
 M:	Helge Deller <deller@gmx.de>
 L:	linux-parisc@vger.kernel.org
 W:	http://www.parisc-linux.org/
@@ -16714,6 +16722,7 @@ M:	Jesper Dangaard Brouer <hawk@kernel.org>
 M:	John Fastabend <john.fastabend@gmail.com>
 L:	netdev@vger.kernel.org
 L:	xdp-newbies@vger.kernel.org
+L:	bpf@vger.kernel.org
 S:	Supported
 F:	net/core/xdp.c
 F:	include/net/xdp.h
@@ -16727,6 +16736,7 @@ XDP SOCKETS (AF_XDP)
 M:	Björn Töpel <bjorn.topel@intel.com>
 M:	Magnus Karlsson <magnus.karlsson@intel.com>
 L:	netdev@vger.kernel.org
+L:	bpf@vger.kernel.org
 S:	Maintained
 F:	kernel/bpf/xskmap.c
 F:	net/xdp/

Makefile

@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 0
 SUBLEVEL = 0
-EXTRAVERSION = -rc7
+EXTRAVERSION =
 NAME = Shy Crocodile
 
 # *DOCUMENTATION*

arch/arc/Kconfig

@@ -191,7 +191,6 @@ config NR_CPUS
 
 config ARC_SMP_HALT_ON_RESET
 	bool "Enable Halt-on-reset boot mode"
-	default y if ARC_UBOOT_SUPPORT
 	help
 	  In SMP configuration cores can be configured as Halt-on-reset
 	  or they could all start at same time. For Halt-on-reset, non
@@ -407,6 +406,14 @@ config ARC_HAS_ACCL_REGS
 	  (also referred to as r58:r59). These can also be used by gcc as GPR so
 	  kernel needs to save/restore per process
 
+config ARC_IRQ_NO_AUTOSAVE
+	bool "Disable hardware autosave regfile on interrupts"
+	default n
+	help
+	  On HS cores, taken interrupt auto saves the regfile on stack.
+	  This is programmable and can be optionally disabled in which case
+	  software INTERRUPT_PROLOGUE/EPILGUE do the needed work
+
 endif	# ISA_ARCV2
 
 endmenu   # "ARC CPU Configuration"
@@ -515,17 +522,6 @@ config ARC_DBG_TLB_PARANOIA
 
 endif
 
-config ARC_UBOOT_SUPPORT
-	bool "Support uboot arg Handling"
-	help
-	  ARC Linux by default checks for uboot provided args as pointers to
-	  external cmdline or DTB. This however breaks in absence of uboot,
-	  when booting from Metaware debugger directly, as the registers are
-	  not zeroed out on reset by mdb and/or ARCv2 based cores. The bogus
-	  registers look like uboot args to kernel which then chokes.
-	  So only enable the uboot arg checking/processing if users are sure
-	  of uboot being in play.
-
 config ARC_BUILTIN_DTB_NAME
 	string "Built in DTB"
 	help

arch/arc/configs/nps_defconfig

@@ -31,7 +31,6 @@ CONFIG_ARC_CACHE_LINE_SHIFT=5
 # CONFIG_ARC_HAS_LLSC is not set
 CONFIG_ARC_KVADDR_SIZE=402
 CONFIG_ARC_EMUL_UNALIGNED=y
-CONFIG_ARC_UBOOT_SUPPORT=y
 CONFIG_PREEMPT=y
 CONFIG_NET=y
 CONFIG_UNIX=y

arch/arc/configs/vdk_hs38_defconfig

@@ -13,7 +13,6 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_ARC_PLAT_AXS10X=y
 CONFIG_AXS103=y
 CONFIG_ISA_ARCV2=y
-CONFIG_ARC_UBOOT_SUPPORT=y
 CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38"
 CONFIG_PREEMPT=y
 CONFIG_NET=y

arch/arc/configs/vdk_hs38_smp_defconfig

@@ -15,8 +15,6 @@ CONFIG_AXS103=y
 CONFIG_ISA_ARCV2=y
 CONFIG_SMP=y
 # CONFIG_ARC_TIMERS_64BIT is not set
-# CONFIG_ARC_SMP_HALT_ON_RESET is not set
-CONFIG_ARC_UBOOT_SUPPORT=y
 CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38_smp"
 CONFIG_PREEMPT=y
 CONFIG_NET=y

arch/arc/include/asm/arcregs.h

@@ -151,6 +151,14 @@ struct bcr_isa_arcv2 {
 #endif
 };
 
+struct bcr_uarch_build_arcv2 {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+	unsigned int pad:8, prod:8, maj:8, min:8;
+#else
+	unsigned int min:8, maj:8, prod:8, pad:8;
+#endif
+};
+
 struct bcr_mpy {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 	unsigned int pad:8, x1616:8, dsp:4, cycles:2, type:2, ver:8;

arch/arc/include/asm/cache.h

@@ -52,6 +52,17 @@
 #define cache_line_size()	SMP_CACHE_BYTES
 #define ARCH_DMA_MINALIGN	SMP_CACHE_BYTES
 
+/*
+ * Make sure slab-allocated buffers are 64-bit aligned when atomic64_t uses
+ * ARCv2 64-bit atomics (LLOCKD/SCONDD). This guarantess runtime 64-bit
+ * alignment for any atomic64_t embedded in buffer.
+ * Default ARCH_SLAB_MINALIGN is __alignof__(long long) which has a relaxed
+ * value of 4 (and not 8) in ARC ABI.
+ */
+#if defined(CONFIG_ARC_HAS_LL64) && defined(CONFIG_ARC_HAS_LLSC)
+#define ARCH_SLAB_MINALIGN	8
+#endif
+
 extern void arc_cache_init(void);
 extern char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len);
 extern void read_decode_cache_bcr(void);

arch/arc/include/asm/entry-arcv2.h

@@ -17,6 +17,33 @@
 	;
 	; Now manually save: r12, sp, fp, gp, r25
 
+#ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE
+.ifnc \called_from, exception
+	st.as	r9, [sp, -10]	; save r9 in it's final stack slot
+	sub	sp, sp, 12	; skip JLI, LDI, EI
+
+	PUSH	lp_count
+	PUSHAX	lp_start
+	PUSHAX	lp_end
+	PUSH	blink
+
+	PUSH	r11
+	PUSH	r10
+
+	sub	sp, sp, 4	; skip r9
+
+	PUSH	r8
+	PUSH	r7
+	PUSH	r6
+	PUSH	r5
+	PUSH	r4
+	PUSH	r3
+	PUSH	r2
+	PUSH	r1
+	PUSH	r0
+.endif
+#endif
+
 #ifdef CONFIG_ARC_HAS_ACCL_REGS
 	PUSH	r59
 	PUSH	r58
@@ -86,6 +113,33 @@
 	POP	r59
 #endif
 
+#ifdef CONFIG_ARC_IRQ_NO_AUTOSAVE
+.ifnc \called_from, exception
+	POP	r0
+	POP	r1
+	POP	r2
+	POP	r3
+	POP	r4
+	POP	r5
+	POP	r6
+	POP	r7
+	POP	r8
+	POP	r9
+	POP	r10
+	POP	r11
+
+	POP	blink
+	POPAX	lp_end
+	POPAX	lp_start
+
+	POP	r9
+	mov	lp_count, r9
+
+	add	sp, sp, 12	; skip JLI, LDI, EI
+	ld.as	r9, [sp, -10]	; reload r9 which got clobbered
+.endif
+#endif
+
 .endm
 
 /*------------------------------------------------------------------------*/

arch/arc/include/asm/uaccess.h

@@ -207,7 +207,7 @@ raw_copy_from_user(void *to, const void __user *from, unsigned long n)
 		*/
 		  "=&r" (tmp), "+r" (to), "+r" (from)
 		:
-		: "lp_count", "lp_start", "lp_end", "memory");
+		: "lp_count", "memory");
 
 		return n;
 	}
@@ -433,7 +433,7 @@ raw_copy_to_user(void __user *to, const void *from, unsigned long n)
 		 */
 		  "=&r" (tmp), "+r" (to), "+r" (from)
 		:
-		: "lp_count", "lp_start", "lp_end", "memory");
+		: "lp_count", "memory");
 
 		return n;
 	}
@@ -653,7 +653,7 @@ static inline unsigned long __arc_clear_user(void __user *to, unsigned long n)
 	"	.previous			\n"
 	: "+r"(d_char), "+r"(res)
 	: "i"(0)
-	: "lp_count", "lp_start", "lp_end", "memory");
+	: "lp_count", "memory");
 
 	return res;
 }
@@ -686,7 +686,7 @@ __arc_strncpy_from_user(char *dst, const char __user *src, long count)
 	"	.previous			\n"
 	: "+r"(res), "+r"(dst), "+r"(src), "=r"(val)
 	: "g"(-EFAULT), "r"(count)
-	: "lp_count", "lp_start", "lp_end", "memory");
+	: "lp_count", "memory");
 
 	return res;
 }

arch/arc/kernel/entry-arcv2.S

@@ -209,7 +209,9 @@ restore_regs:
 ;####### Return from Intr #######
 
 debug_marker_l1:
-	bbit1.nt r0, STATUS_DE_BIT, .Lintr_ret_to_delay_slot
+	; bbit1.nt r0, STATUS_DE_BIT, .Lintr_ret_to_delay_slot
+	btst	r0, STATUS_DE_BIT		; Z flag set if bit clear
+	bnz	.Lintr_ret_to_delay_slot	; branch if STATUS_DE_BIT set
 
 .Lisr_ret_fast_path:
 	; Handle special case #1: (Entry via Exception, Return via IRQ)

arch/arc/kernel/head.S

@@ -17,6 +17,7 @@
 #include <asm/entry.h>
 #include <asm/arcregs.h>
 #include <asm/cache.h>
+#include <asm/irqflags.h>
 
 .macro CPU_EARLY_SETUP
 
@@ -47,6 +48,15 @@
 	sr	r5, [ARC_REG_DC_CTRL]
 
 1:
+
+#ifdef CONFIG_ISA_ARCV2
+	; Unaligned access is disabled at reset, so re-enable early as
+	; gcc 7.3.1 (ARC GNU 2018.03) onwards generates unaligned access
+	; by default
+	lr	r5, [status32]
+	bset	r5, r5, STATUS_AD_BIT
+	kflag	r5
+#endif
 .endm
 
 	.section .init.text, "ax",@progbits
@@ -90,15 +100,13 @@ ENTRY(stext)
 	st.ab   0, [r5, 4]
 1:
 
-#ifdef CONFIG_ARC_UBOOT_SUPPORT
 	; Uboot - kernel ABI
 	;    r0 = [0] No uboot interaction, [1] cmdline in r2, [2] DTB in r2
-	;    r1 = magic number (board identity, unused as of now
+	;    r1 = magic number (always zero as of now)
 	;    r2 = pointer to uboot provided cmdline or external DTB in mem
-	; These are handled later in setup_arch()
+	; These are handled later in handle_uboot_args()
 	st	r0, [@uboot_tag]
 	st	r2, [@uboot_arg]
-#endif
 
 	; setup "current" tsk and optionally cache it in dedicated r25
 	mov	r9, @init_task

arch/arc/kernel/intc-arcv2.c

@@ -49,11 +49,13 @@ void arc_init_IRQ(void)
 
 	*(unsigned int *)&ictrl = 0;
 
+#ifndef CONFIG_ARC_IRQ_NO_AUTOSAVE
 	ictrl.save_nr_gpr_pairs = 6;	/* r0 to r11 (r12 saved manually) */
 	ictrl.save_blink = 1;
 	ictrl.save_lp_regs = 1;		/* LP_COUNT, LP_START, LP_END */
 	ictrl.save_u_to_u = 0;		/* user ctxt saved on kernel stack */
 	ictrl.save_idx_regs = 1;	/* JLI, LDI, EI */
+#endif
 
 	WRITE_AUX(AUX_IRQ_CTRL, ictrl);
 

arch/arc/kernel/setup.c

@@ -199,20 +199,36 @@ static void read_arc_build_cfg_regs(void)
 		cpu->bpu.ret_stk = 4 << bpu.rse;
 
 		if (cpu->core.family >= 0x54) {
-			unsigned int exec_ctrl;
 
-			READ_BCR(AUX_EXEC_CTRL, exec_ctrl);
-			cpu->extn.dual_enb = !(exec_ctrl & 1);
+			struct bcr_uarch_build_arcv2 uarch;
 
-			/* dual issue always present for this core */
-			cpu->extn.dual = 1;
+			/*
+			 * The first 0x54 core (uarch maj:min 0:1 or 0:2) was
+			 * dual issue only (HS4x). But next uarch rev (1:0)
+			 * allows it be configured for single issue (HS3x)
+			 * Ensure we fiddle with dual issue only on HS4x
+			 */
+			READ_BCR(ARC_REG_MICRO_ARCH_BCR, uarch);
+
+			if (uarch.prod == 4) {
+				unsigned int exec_ctrl;
+
+				/* dual issue hardware always present */
+				cpu->extn.dual = 1;
+
+				READ_BCR(AUX_EXEC_CTRL, exec_ctrl);
+
+				/* dual issue hardware enabled ? */
+				cpu->extn.dual_enb = !(exec_ctrl & 1);
+
+			}
 		}
 	}
 
 	READ_BCR(ARC_REG_AP_BCR, ap);
 	if (ap.ver) {
 		cpu->extn.ap_num = 2 << ap.num;
-		cpu->extn.ap_full = !!ap.min;
+		cpu->extn.ap_full = !ap.min;
 	}
 
 	READ_BCR(ARC_REG_SMART_BCR, bcr);
@@ -462,43 +478,78 @@ void setup_processor(void)
 	arc_chk_core_config();
 }
 
-static inline int is_kernel(unsigned long addr)
+static inline bool uboot_arg_invalid(unsigned long addr)
 {
-	if (addr >= (unsigned long)_stext && addr <= (unsigned long)_end)
-		return 1;
-	return 0;
+	/*
+	 * Check that it is a untranslated address (although MMU is not enabled
+	 * yet, it being a high address ensures this is not by fluke)
+	 */
+	if (addr < PAGE_OFFSET)
+		return true;
+
+	/* Check that address doesn't clobber resident kernel image */
+	return addr >= (unsigned long)_stext && addr <= (unsigned long)_end;
+}
+
+#define IGNORE_ARGS		"Ignore U-boot args: "
+
+/* uboot_tag values for U-boot - kernel ABI revision 0; see head.S */
+#define UBOOT_TAG_NONE		0
+#define UBOOT_TAG_CMDLINE	1
+#define UBOOT_TAG_DTB		2
+
+void __init handle_uboot_args(void)
+{
+	bool use_embedded_dtb = true;
+	bool append_cmdline = false;
+
+	/* check that we know this tag */
+	if (uboot_tag != UBOOT_TAG_NONE &&
+	    uboot_tag != UBOOT_TAG_CMDLINE &&
+	    uboot_tag != UBOOT_TAG_DTB) {
+		pr_warn(IGNORE_ARGS "invalid uboot tag: '%08x'\n", uboot_tag);
+		goto ignore_uboot_args;
+	}
+
+	if (uboot_tag != UBOOT_TAG_NONE &&
+            uboot_arg_invalid((unsigned long)uboot_arg)) {
+		pr_warn(IGNORE_ARGS "invalid uboot arg: '%px'\n", uboot_arg);
+		goto ignore_uboot_args;
+	}
+
+	/* see if U-boot passed an external Device Tree blob */
+	if (uboot_tag == UBOOT_TAG_DTB) {
+		machine_desc = setup_machine_fdt((void *)uboot_arg);
+
+		/* external Device Tree blob is invalid - use embedded one */
+		use_embedded_dtb = !machine_desc;
+	}
+
+	if (uboot_tag == UBOOT_TAG_CMDLINE)
+		append_cmdline = true;
+
+ignore_uboot_args:
+
+	if (use_embedded_dtb) {
+		machine_desc = setup_machine_fdt(__dtb_start);
+		if (!machine_desc)
+			panic("Embedded DT invalid\n");
+	}
+
+	/*
+	 * NOTE: @boot_command_line is populated by setup_machine_fdt() so this
+	 * append processing can only happen after.
+	 */
+	if (append_cmdline) {
+		/* Ensure a whitespace between the 2 cmdlines */
+		strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
+		strlcat(boot_command_line, uboot_arg, COMMAND_LINE_SIZE);
+	}
 }
 
 void __init setup_arch(char **cmdline_p)
 {
-#ifdef CONFIG_ARC_UBOOT_SUPPORT
-	/* make sure that uboot passed pointer to cmdline/dtb is valid */
-	if (uboot_tag && is_kernel((unsigned long)uboot_arg))
-		panic("Invalid uboot arg\n");
-
-	/* See if u-boot passed an external Device Tree blob */
-	machine_desc = setup_machine_fdt(uboot_arg);	/* uboot_tag == 2 */
-	if (!machine_desc)
-#endif
-	{
-		/* No, so try the embedded one */
-		machine_desc = setup_machine_fdt(__dtb_start);
-		if (!machine_desc)
-			panic("Embedded DT invalid\n");
-
-		/*
-		 * If we are here, it is established that @uboot_arg didn't
-		 * point to DT blob. Instead if u-boot says it is cmdline,
-		 * append to embedded DT cmdline.
-		 * setup_machine_fdt() would have populated @boot_command_line
-		 */
-		if (uboot_tag == 1) {
-			/* Ensure a whitespace between the 2 cmdlines */
-			strlcat(boot_command_line, " ", COMMAND_LINE_SIZE);
-			strlcat(boot_command_line, uboot_arg,
-				COMMAND_LINE_SIZE);
-		}
-	}
+	handle_uboot_args();
 
 	/* Save unparsed command line copy for /proc/cmdline */
 	*cmdline_p = boot_command_line;

arch/arc/lib/memcpy-archs.S

@@ -25,15 +25,11 @@
 #endif
 
 #ifdef CONFIG_ARC_HAS_LL64
-# define PREFETCH_READ(RX)	prefetch    [RX, 56]
-# define PREFETCH_WRITE(RX)	prefetchw   [RX, 64]
 # define LOADX(DST,RX)		ldd.ab	DST, [RX, 8]
 # define STOREX(SRC,RX)		std.ab	SRC, [RX, 8]
 # define ZOLSHFT		5
 # define ZOLAND			0x1F
 #else
-# define PREFETCH_READ(RX)	prefetch    [RX, 28]
-# define PREFETCH_WRITE(RX)	prefetchw   [RX, 32]
 # define LOADX(DST,RX)		ld.ab	DST, [RX, 4]
 # define STOREX(SRC,RX)		st.ab	SRC, [RX, 4]
 # define ZOLSHFT		4
@@ -41,8 +37,6 @@
 #endif
 
 ENTRY_CFI(memcpy)
-	prefetch [r1]		; Prefetch the read location
-	prefetchw [r0]		; Prefetch the write location
 	mov.f	0, r2
 ;;; if size is zero
 	jz.d	[blink]
@@ -72,8 +66,6 @@ ENTRY_CFI(memcpy)
 	lpnz	@.Lcopy32_64bytes
 	;; LOOP START
 	LOADX (r6, r1)
-	PREFETCH_READ (r1)
-	PREFETCH_WRITE (r3)
 	LOADX (r8, r1)
 	LOADX (r10, r1)
 	LOADX (r4, r1)
@@ -117,9 +109,7 @@ ENTRY_CFI(memcpy)
 	lpnz	@.Lcopy8bytes_1
 	;; LOOP START
 	ld.ab	r6, [r1, 4]
-	prefetch [r1, 28]	;Prefetch the next read location
 	ld.ab	r8, [r1,4]
-	prefetchw [r3, 32]	;Prefetch the next write location
 
 	SHIFT_1	(r7, r6, 24)
 	or	r7, r7, r5
@@ -162,9 +152,7 @@ ENTRY_CFI(memcpy)
 	lpnz	@.Lcopy8bytes_2
 	;; LOOP START
 	ld.ab	r6, [r1, 4]
-	prefetch [r1, 28]	;Prefetch the next read location
 	ld.ab	r8, [r1,4]
-	prefetchw [r3, 32]	;Prefetch the next write location
 
 	SHIFT_1	(r7, r6, 16)
 	or	r7, r7, r5
@@ -204,9 +192,7 @@ ENTRY_CFI(memcpy)
 	lpnz	@.Lcopy8bytes_3
 	;; LOOP START
 	ld.ab	r6, [r1, 4]
-	prefetch [r1, 28]	;Prefetch the next read location
 	ld.ab	r8, [r1,4]
-	prefetchw [r3, 32]	;Prefetch the next write location
 
 	SHIFT_1	(r7, r6, 8)
 	or	r7, r7, r5

arch/arc/plat-hsdk/Kconfig

@@ -9,6 +9,7 @@ menuconfig ARC_SOC_HSDK
 	bool "ARC HS Development Kit SOC"
 	depends on ISA_ARCV2
 	select ARC_HAS_ACCL_REGS
+	select ARC_IRQ_NO_AUTOSAVE
 	select CLK_HSDK
 	select RESET_HSDK
 	select HAVE_PCI

arch/arm/Kconfig

@@ -1400,6 +1400,7 @@ config NR_CPUS
 config HOTPLUG_CPU
 	bool "Support for hot-pluggable CPUs"
 	depends on SMP
+	select GENERIC_IRQ_MIGRATION
 	help
 	  Say Y here to experiment with turning CPUs off and on.  CPUs
 	  can be controlled through /sys/devices/system/cpu.

arch/arm/boot/dts/am335x-evm.dts

@@ -729,7 +729,7 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-txid";
+	phy-mode = "rgmii-id";
 };
 
 &tscadc {

arch/arm/boot/dts/am335x-evmsk.dts

@@ -651,13 +651,13 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-txid";
+	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
 	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii-txid";
+	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <2>;
 };
 

arch/arm/boot/dts/armada-xp-db.dts

@@ -144,30 +144,32 @@
 				status = "okay";
 			};
 
-			nand@d0000 {
+			nand-controller@d0000 {
 				status = "okay";
-				label = "pxa3xx_nand-0";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				nand-on-flash-bbt;
 
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
+				nand@0 {
+					reg = <0>;
+					label = "pxa3xx_nand-0";
+					nand-rb = <0>;
+					nand-on-flash-bbt;
 
-					partition@0 {
-						label = "U-Boot";
-						reg = <0 0x800000>;
-					};
-					partition@800000 {
-						label = "Linux";
-						reg = <0x800000 0x800000>;
-					};
-					partition@1000000 {
-						label = "Filesystem";
-						reg = <0x1000000 0x3f000000>;
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
 
+						partition@0 {
+							label = "U-Boot";
+							reg = <0 0x800000>;
+						};
+						partition@800000 {
+							label = "Linux";
+							reg = <0x800000 0x800000>;
+						};
+						partition@1000000 {
+							label = "Filesystem";
+							reg = <0x1000000 0x3f000000>;
+						};
 					};
 				};
 			};

arch/arm/boot/dts/armada-xp-gp.dts

@@ -160,12 +160,15 @@
 				status = "okay";
 			};
 
-			nand@d0000 {
+			nand-controller@d0000 {
 				status = "okay";
-				label = "pxa3xx_nand-0";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				nand-on-flash-bbt;
+
+				nand@0 {
+					reg = <0>;
+					label = "pxa3xx_nand-0";
+					nand-rb = <0>;
+					nand-on-flash-bbt;
+				};
 			};
 		};
 

arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts

@@ -81,49 +81,52 @@
 
 			};
 
-			nand@d0000 {
+			nand-controller@d0000 {
 				status = "okay";
-				label = "pxa3xx_nand-0";
-				num-cs = <1>;
-				marvell,nand-keep-config;
-				nand-on-flash-bbt;
 
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
+				nand@0 {
+					reg = <0>;
+					label = "pxa3xx_nand-0";
+					nand-rb = <0>;
+					nand-on-flash-bbt;
 
-					partition@0 {
-						label = "u-boot";
-						reg = <0x00000000 0x000e0000>;
-						read-only;
-					};
+					partitions {
+						compatible = "fixed-partitions";
+						#address-cells = <1>;
+						#size-cells = <1>;
 
-					partition@e0000 {
-						label = "u-boot-env";
-						reg = <0x000e0000 0x00020000>;
-						read-only;
-					};
+						partition@0 {
+							label = "u-boot";
+							reg = <0x00000000 0x000e0000>;
+							read-only;
+						};
 
-					partition@100000 {
-						label = "u-boot-env2";
-						reg = <0x00100000 0x00020000>;
-						read-only;
-					};
+						partition@e0000 {
+							label = "u-boot-env";
+							reg = <0x000e0000 0x00020000>;
+							read-only;
+						};
 
-					partition@120000 {
-						label = "zImage";
-						reg = <0x00120000 0x00400000>;
-					};
+						partition@100000 {
+							label = "u-boot-env2";
+							reg = <0x00100000 0x00020000>;
+							read-only;
+						};
 
-					partition@520000 {
-						label = "initrd";
-						reg = <0x00520000 0x00400000>;
-					};
+						partition@120000 {
+							label = "zImage";
+							reg = <0x00120000 0x00400000>;
+						};
 
-					partition@e00000 {
-						label = "boot";
-						reg = <0x00e00000 0x3f200000>;
+						partition@520000 {
+							label = "initrd";
+							reg = <0x00520000 0x00400000>;
+						};
+
+						partition@e00000 {
+							label = "boot";
+							reg = <0x00e00000 0x3f200000>;
+						};
 					};
 				};
 			};

arch/arm/boot/dts/gemini-dlink-dir-685.dts

@@ -443,7 +443,7 @@
 		};
 
 		display-controller@6a000000 {
-			status = "disabled";
+			status = "okay";
 
 			port@0 {
 				reg = <0>;

arch/arm/boot/dts/tegra124-nyan.dtsi

@@ -13,10 +13,25 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	memory@80000000 {
+	/*
+	 * Note that recent version of the device tree compiler (starting with
+	 * version 1.4.2) warn about this node containing a reg property, but
+	 * missing a unit-address. However, the bootloader on these Chromebook
+	 * devices relies on the full name of this node to be exactly /memory.
+	 * Adding the unit-address causes the bootloader to create a /memory
+	 * node and write the memory bank configuration to that node, which in
+	 * turn leads the kernel to believe that the device has 2 GiB of
+	 * memory instead of the amount detected by the bootloader.
+	 *
+	 * The name of this node is effectively ABI and must not be changed.
+	 */
+	memory {
+		device_type = "memory";
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
+	/delete-node/ memory@80000000;
+
 	host1x@50000000 {
 		hdmi@54280000 {
 			status = "okay";

arch/arm/crypto/sha256-armv4.pl

@@ -212,10 +212,11 @@ K256:
 .global	sha256_block_data_order
 .type	sha256_block_data_order,%function
 sha256_block_data_order:
+.Lsha256_block_data_order:
 #if __ARM_ARCH__<7
 	sub	r3,pc,#8		@ sha256_block_data_order
 #else
-	adr	r3,sha256_block_data_order
+	adr	r3,.Lsha256_block_data_order
 #endif
 #if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
 	ldr	r12,.LOPENSSL_armcap

arch/arm/crypto/sha256-core.S_shipped

@@ -93,10 +93,11 @@ K256:
 .global	sha256_block_data_order
 .type	sha256_block_data_order,%function
 sha256_block_data_order:
+.Lsha256_block_data_order:
 #if __ARM_ARCH__<7
 	sub	r3,pc,#8		@ sha256_block_data_order
 #else
-	adr	r3,sha256_block_data_order
+	adr	r3,.Lsha256_block_data_order
 #endif
 #if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
 	ldr	r12,.LOPENSSL_armcap

arch/arm/crypto/sha512-armv4.pl

@@ -274,10 +274,11 @@ WORD64(0x5fcb6fab,0x3ad6faec, 0x6c44198c,0x4a475817)
 .global	sha512_block_data_order
 .type	sha512_block_data_order,%function
 sha512_block_data_order:
+.Lsha512_block_data_order:
 #if __ARM_ARCH__<7
 	sub	r3,pc,#8		@ sha512_block_data_order
 #else
-	adr	r3,sha512_block_data_order
+	adr	r3,.Lsha512_block_data_order
 #endif
 #if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
 	ldr	r12,.LOPENSSL_armcap

arch/arm/crypto/sha512-core.S_shipped

@@ -141,10 +141,11 @@ WORD64(0x5fcb6fab,0x3ad6faec, 0x6c44198c,0x4a475817)
 .global	sha512_block_data_order
 .type	sha512_block_data_order,%function
 sha512_block_data_order:
+.Lsha512_block_data_order:
 #if __ARM_ARCH__<7
 	sub	r3,pc,#8		@ sha512_block_data_order
 #else
-	adr	r3,sha512_block_data_order
+	adr	r3,.Lsha512_block_data_order
 #endif
 #if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
 	ldr	r12,.LOPENSSL_armcap

arch/arm/include/asm/irq.h

@@ -25,7 +25,6 @@
 #ifndef __ASSEMBLY__
 struct irqaction;
 struct pt_regs;
-extern void migrate_irqs(void);
 
 extern void asm_do_IRQ(unsigned int, struct pt_regs *);
 void handle_IRQ(unsigned int, struct pt_regs *);

arch/arm/kernel/irq.c

@@ -31,7 +31,6 @@
 #include <linux/smp.h>
 #include <linux/init.h>
 #include <linux/seq_file.h>
-#include <linux/ratelimit.h>
 #include <linux/errno.h>
 #include <linux/list.h>
 #include <linux/kallsyms.h>
@@ -109,64 +108,3 @@ int __init arch_probe_nr_irqs(void)
 	return nr_irqs;
 }
 #endif
-
-#ifdef CONFIG_HOTPLUG_CPU
-static bool migrate_one_irq(struct irq_desc *desc)
-{
-	struct irq_data *d = irq_desc_get_irq_data(desc);
-	const struct cpumask *affinity = irq_data_get_affinity_mask(d);
-	struct irq_chip *c;
-	bool ret = false;
-
-	/*
-	 * If this is a per-CPU interrupt, or the affinity does not
-	 * include this CPU, then we have nothing to do.
-	 */
-	if (irqd_is_per_cpu(d) || !cpumask_test_cpu(smp_processor_id(), affinity))
-		return false;
-
-	if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) {
-		affinity = cpu_online_mask;
-		ret = true;
-	}
-
-	c = irq_data_get_irq_chip(d);
-	if (!c->irq_set_affinity)
-		pr_debug("IRQ%u: unable to set affinity\n", d->irq);
-	else if (c->irq_set_affinity(d, affinity, false) == IRQ_SET_MASK_OK && ret)
-		cpumask_copy(irq_data_get_affinity_mask(d), affinity);
-
-	return ret;
-}
-
-/*
- * The current CPU has been marked offline.  Migrate IRQs off this CPU.
- * If the affinity settings do not allow other CPUs, force them onto any
- * available CPU.
- *
- * Note: we must iterate over all IRQs, whether they have an attached
- * action structure or not, as we need to get chained interrupts too.
- */
-void migrate_irqs(void)
-{
-	unsigned int i;
-	struct irq_desc *desc;
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	for_each_irq_desc(i, desc) {
-		bool affinity_broken;
-
-		raw_spin_lock(&desc->lock);
-		affinity_broken = migrate_one_irq(desc);
-		raw_spin_unlock(&desc->lock);
-
-		if (affinity_broken)
-			pr_warn_ratelimited("IRQ%u no longer affine to CPU%u\n",
-				i, smp_processor_id());
-	}
-
-	local_irq_restore(flags);
-}
-#endif /* CONFIG_HOTPLUG_CPU */

arch/arm/kernel/smp.c

@@ -254,7 +254,7 @@ int __cpu_disable(void)
 	/*
 	 * OK - migrate IRQs away from this CPU
 	 */
-	migrate_irqs();
+	irq_migrate_all_off_this_cpu();
 
 	/*
 	 * Flush user cache and TLB mappings, and then remove this CPU

arch/arm/mm/dma-mapping.c

@@ -2390,4 +2390,6 @@ void arch_teardown_dma_ops(struct device *dev)
 		return;
 
 	arm_teardown_iommu_dma_ops(dev);
+	/* Let arch_setup_dma_ops() start again from scratch upon re-probe */
+	set_dma_ops(dev, NULL);
 }

arch/arm/probes/kprobes/opt-arm.c

@@ -247,7 +247,7 @@ int arch_prepare_optimized_kprobe(struct optimized_kprobe *op, struct kprobe *or
 	}
 
 	/* Copy arch-dep-instance from template. */
-	memcpy(code, (unsigned char *)optprobe_template_entry,
+	memcpy(code, (unsigned long *)&optprobe_template_entry,
 			TMPL_END_IDX * sizeof(kprobe_opcode_t));
 
 	/* Adjust buffer according to instruction. */

arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts

@@ -351,7 +351,7 @@
 		reg = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp0_copper_eth_phy_reset>;
-		reset-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&cp0_gpio2 11 GPIO_ACTIVE_LOW>;
 		reset-assert-us = <10000>;
 	};
 

arch/arm64/boot/dts/qcom/msm8998.dtsi

@@ -37,7 +37,7 @@
 		};
 
 		memory@86200000 {
-			reg = <0x0 0x86200000 0x0 0x2600000>;
+			reg = <0x0 0x86200000 0x0 0x2d00000>;
 			no-map;
 		};
 

arch/arm64/crypto/chacha-neon-core.S

@@ -158,8 +158,8 @@ ENTRY(hchacha_block_neon)
 	mov		w3, w2
 	bl		chacha_permute
 
-	st1		{v0.16b}, [x1], #16
-	st1		{v3.16b}, [x1]
+	st1		{v0.4s}, [x1], #16
+	st1		{v3.4s}, [x1]
 
 	ldp		x29, x30, [sp], #16
 	ret
@@ -532,6 +532,10 @@ ENTRY(chacha_4block_xor_neon)
 	add		v3.4s, v3.4s, v19.4s
 	  add		a2, a2, w8
 	  add		a3, a3, w9
+CPU_BE(	  rev		a0, a0		)
+CPU_BE(	  rev		a1, a1		)
+CPU_BE(	  rev		a2, a2		)
+CPU_BE(	  rev		a3, a3		)
 
 	ld4r		{v24.4s-v27.4s}, [x0], #16
 	ld4r		{v28.4s-v31.4s}, [x0]
@@ -552,6 +556,10 @@ ENTRY(chacha_4block_xor_neon)
 	add		v7.4s, v7.4s, v23.4s
 	  add		a6, a6, w8
 	  add		a7, a7, w9
+CPU_BE(	  rev		a4, a4		)
+CPU_BE(	  rev		a5, a5		)
+CPU_BE(	  rev		a6, a6		)
+CPU_BE(	  rev		a7, a7		)
 
 	// x8[0-3] += s2[0]
 	// x9[0-3] += s2[1]
@@ -569,6 +577,10 @@ ENTRY(chacha_4block_xor_neon)
 	add		v11.4s, v11.4s, v27.4s
 	  add		a10, a10, w8
 	  add		a11, a11, w9
+CPU_BE(	  rev		a8, a8		)
+CPU_BE(	  rev		a9, a9		)
+CPU_BE(	  rev		a10, a10	)
+CPU_BE(	  rev		a11, a11	)
 
 	// x12[0-3] += s3[0]
 	// x13[0-3] += s3[1]
@@ -586,6 +598,10 @@ ENTRY(chacha_4block_xor_neon)
 	add		v15.4s, v15.4s, v31.4s
 	  add		a14, a14, w8
 	  add		a15, a15, w9
+CPU_BE(	  rev		a12, a12	)
+CPU_BE(	  rev		a13, a13	)
+CPU_BE(	  rev		a14, a14	)
+CPU_BE(	  rev		a15, a15	)
 
 	// interleave 32-bit words in state n, n+1
 	  ldp		w6, w7, [x2], #64

arch/arm64/include/asm/neon-intrinsics.h

@@ -36,4 +36,8 @@
 #include <arm_neon.h>
 #endif
 
+#ifdef CONFIG_CC_IS_CLANG
+#pragma clang diagnostic ignored "-Wincompatible-pointer-types"
+#endif
+
 #endif /* __ASM_NEON_INTRINSICS_H */

arch/arm64/kernel/head.S

@@ -539,8 +539,7 @@ set_hcr:
 	/* GICv3 system register access */
 	mrs	x0, id_aa64pfr0_el1
 	ubfx	x0, x0, #24, #4
-	cmp	x0, #1
-	b.ne	3f
+	cbz	x0, 3f
 
 	mrs_s	x0, SYS_ICC_SRE_EL2
 	orr	x0, x0, #ICC_SRE_EL2_SRE	// Set ICC_SRE_EL2.SRE==1

arch/arm64/kernel/ptrace.c

@@ -1702,19 +1702,20 @@ void syscall_trace_exit(struct pt_regs *regs)
 }
 
 /*
- * SPSR_ELx bits which are always architecturally RES0 per ARM DDI 0487C.a
- * We also take into account DIT (bit 24), which is not yet documented, and
- * treat PAN and UAO as RES0 bits, as they are meaningless at EL0, and may be
- * allocated an EL0 meaning in future.
+ * SPSR_ELx bits which are always architecturally RES0 per ARM DDI 0487D.a.
+ * We permit userspace to set SSBS (AArch64 bit 12, AArch32 bit 23) which is
+ * not described in ARM DDI 0487D.a.
+ * We treat PAN and UAO as RES0 bits, as they are meaningless at EL0, and may
+ * be allocated an EL0 meaning in future.
  * Userspace cannot use these until they have an architectural meaning.
  * Note that this follows the SPSR_ELx format, not the AArch32 PSR format.
  * We also reserve IL for the kernel; SS is handled dynamically.
  */
 #define SPSR_EL1_AARCH64_RES0_BITS \
-	(GENMASK_ULL(63,32) | GENMASK_ULL(27, 25) | GENMASK_ULL(23, 22) | \
-	 GENMASK_ULL(20, 10) | GENMASK_ULL(5, 5))
+	(GENMASK_ULL(63, 32) | GENMASK_ULL(27, 25) | GENMASK_ULL(23, 22) | \
+	 GENMASK_ULL(20, 13) | GENMASK_ULL(11, 10) | GENMASK_ULL(5, 5))
 #define SPSR_EL1_AARCH32_RES0_BITS \
-	(GENMASK_ULL(63,32) | GENMASK_ULL(23, 22) | GENMASK_ULL(20,20))
+	(GENMASK_ULL(63, 32) | GENMASK_ULL(22, 22) | GENMASK_ULL(20, 20))
 
 static int valid_compat_regs(struct user_pt_regs *regs)
 {

arch/arm64/kernel/setup.c

@@ -339,6 +339,9 @@ void __init setup_arch(char **cmdline_p)
 	smp_init_cpus();
 	smp_build_mpidr_hash();
 
+	/* Init percpu seeds for random tags after cpus are set up. */
+	kasan_init_tags();
+
 #ifdef CONFIG_ARM64_SW_TTBR0_PAN
 	/*
 	 * Make sure init_thread_info.ttbr0 always generates translation

arch/arm64/mm/kasan_init.c

@@ -252,8 +252,6 @@ void __init kasan_init(void)
 	memset(kasan_early_shadow_page, KASAN_SHADOW_INIT, PAGE_SIZE);
 	cpu_replace_ttbr1(lm_alias(swapper_pg_dir));
 
-	kasan_init_tags();
-
 	/* At this point kasan is fully initialized. Enable error messages */
 	init_task.kasan_depth = 0;
 	pr_info("KernelAddressSanitizer initialized\n");

arch/mips/bcm63xx/dev-enet.c

@@ -70,6 +70,8 @@ static struct platform_device bcm63xx_enet_shared_device = {
 
 static int shared_device_registered;
 
+static u64 enet_dmamask = DMA_BIT_MASK(32);
+
 static struct resource enet0_res[] = {
 	{
 		.start		= -1, /* filled at runtime */
@@ -99,6 +101,8 @@ static struct platform_device bcm63xx_enet0_device = {
 	.resource	= enet0_res,
 	.dev		= {
 		.platform_data = &enet0_pd,
+		.dma_mask = &enet_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 };
 
@@ -131,6 +135,8 @@ static struct platform_device bcm63xx_enet1_device = {
 	.resource	= enet1_res,
 	.dev		= {
 		.platform_data = &enet1_pd,
+		.dma_mask = &enet_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 };
 
@@ -157,6 +163,8 @@ static struct platform_device bcm63xx_enetsw_device = {
 	.resource	= enetsw_res,
 	.dev		= {
 		.platform_data = &enetsw_pd,
+		.dma_mask = &enet_dmamask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
 	},
 };
 

arch/mips/kernel/cmpxchg.c

@@ -54,10 +54,9 @@ unsigned long __xchg_small(volatile void *ptr, unsigned long val, unsigned int s
 unsigned long __cmpxchg_small(volatile void *ptr, unsigned long old,
 			      unsigned long new, unsigned int size)
 {
-	u32 mask, old32, new32, load32;
+	u32 mask, old32, new32, load32, load;
 	volatile u32 *ptr32;
 	unsigned int shift;
-	u8 load;
 
 	/* Check that ptr is naturally aligned */
 	WARN_ON((unsigned long)ptr & (size - 1));

arch/mips/kernel/setup.c

@@ -384,7 +384,8 @@ static void __init bootmem_init(void)
 	init_initrd();
 	reserved_end = (unsigned long) PFN_UP(__pa_symbol(&_end));
 
-	memblock_reserve(PHYS_OFFSET, reserved_end << PAGE_SHIFT);
+	memblock_reserve(PHYS_OFFSET,
+			 (reserved_end << PAGE_SHIFT) - PHYS_OFFSET);
 
 	/*
 	 * max_low_pfn is not a number of pages. The number of pages

arch/mips/lantiq/xway/vmmc.c

@@ -31,8 +31,8 @@ static int vmmc_probe(struct platform_device *pdev)
 	dma_addr_t dma;
 
 	cp1_base =
-		(void *) CPHYSADDR(dma_alloc_coherent(NULL, CP1_SIZE,
-						    &dma, GFP_ATOMIC));
+		(void *) CPHYSADDR(dma_alloc_coherent(&pdev->dev, CP1_SIZE,
+						    &dma, GFP_KERNEL));
 
 	gpio_count = of_gpio_count(pdev->dev.of_node);
 	while (gpio_count > 0) {

arch/mips/net/ebpf_jit.c

@@ -79,8 +79,6 @@ enum reg_val_type {
 	REG_64BIT_32BIT,
 	/* 32-bit compatible, need truncation for 64-bit ops. */
 	REG_32BIT,
-	/* 32-bit zero extended. */
-	REG_32BIT_ZERO_EX,
 	/* 32-bit no sign/zero extension needed. */
 	REG_32BIT_POS
 };
@@ -343,12 +341,15 @@ static int build_int_epilogue(struct jit_ctx *ctx, int dest_reg)
 	const struct bpf_prog *prog = ctx->skf;
 	int stack_adjust = ctx->stack_size;
 	int store_offset = stack_adjust - 8;
+	enum reg_val_type td;
 	int r0 = MIPS_R_V0;
 
-	if (dest_reg == MIPS_R_RA &&
-	    get_reg_val_type(ctx, prog->len, BPF_REG_0) == REG_32BIT_ZERO_EX)
+	if (dest_reg == MIPS_R_RA) {
 		/* Don't let zero extended value escape. */
-		emit_instr(ctx, sll, r0, r0, 0);
+		td = get_reg_val_type(ctx, prog->len, BPF_REG_0);
+		if (td == REG_64BIT)
+			emit_instr(ctx, sll, r0, r0, 0);
+	}
 
 	if (ctx->flags & EBPF_SAVE_RA) {
 		emit_instr(ctx, ld, MIPS_R_RA, store_offset, MIPS_R_SP);
@@ -692,7 +693,7 @@ static int build_one_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
 		if (dst < 0)
 			return dst;
 		td = get_reg_val_type(ctx, this_idx, insn->dst_reg);
-		if (td == REG_64BIT || td == REG_32BIT_ZERO_EX) {
+		if (td == REG_64BIT) {
 			/* sign extend */
 			emit_instr(ctx, sll, dst, dst, 0);
 		}
@@ -707,7 +708,7 @@ static int build_one_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
 		if (dst < 0)
 			return dst;
 		td = get_reg_val_type(ctx, this_idx, insn->dst_reg);
-		if (td == REG_64BIT || td == REG_32BIT_ZERO_EX) {
+		if (td == REG_64BIT) {
 			/* sign extend */
 			emit_instr(ctx, sll, dst, dst, 0);
 		}
@@ -721,7 +722,7 @@ static int build_one_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
 		if (dst < 0)
 			return dst;
 		td = get_reg_val_type(ctx, this_idx, insn->dst_reg);
-		if (td == REG_64BIT || td == REG_32BIT_ZERO_EX)
+		if (td == REG_64BIT)
 			/* sign extend */
 			emit_instr(ctx, sll, dst, dst, 0);
 		if (insn->imm == 1) {
@@ -860,13 +861,13 @@ static int build_one_insn(const struct bpf_insn *insn, struct jit_ctx *ctx,
 		if (src < 0 || dst < 0)
 			return -EINVAL;
 		td = get_reg_val_type(ctx, this_idx, insn->dst_reg);
-		if (td == REG_64BIT || td == REG_32BIT_ZERO_EX) {
+		if (td == REG_64BIT) {
 			/* sign extend */
 			emit_instr(ctx, sll, dst, dst, 0);
 		}
 		did_move = false;
 		ts = get_reg_val_type(ctx, this_idx, insn->src_reg);
-		if (ts == REG_64BIT || ts == REG_32BIT_ZERO_EX) {
+		if (ts == REG_64BIT) {
 			int tmp_reg = MIPS_R_AT;
 
 			if (bpf_op == BPF_MOV) {
@@ -1254,8 +1255,7 @@ jeq_common:
 		if (insn->imm == 64 && td == REG_32BIT)
 			emit_instr(ctx, dinsu, dst, MIPS_R_ZERO, 32, 32);
 
-		if (insn->imm != 64 &&
-		    (td == REG_64BIT || td == REG_32BIT_ZERO_EX)) {
+		if (insn->imm != 64 && td == REG_64BIT) {
 			/* sign extend */
 			emit_instr(ctx, sll, dst, dst, 0);
 		}
@@ -1819,7 +1819,7 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
 
 	/* Update the icache */
 	flush_icache_range((unsigned long)ctx.target,
-			   (unsigned long)(ctx.target + ctx.idx * sizeof(u32)));
+			   (unsigned long)&ctx.target[ctx.idx]);
 
 	if (bpf_jit_enable > 1)
 		/* Dump JIT code */

arch/parisc/kernel/ptrace.c

@@ -308,15 +308,29 @@ long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 
 long do_syscall_trace_enter(struct pt_regs *regs)
 {
-	if (test_thread_flag(TIF_SYSCALL_TRACE) &&
-	    tracehook_report_syscall_entry(regs)) {
+	if (test_thread_flag(TIF_SYSCALL_TRACE)) {
+		int rc = tracehook_report_syscall_entry(regs);
+
 		/*
-		 * Tracing decided this syscall should not happen or the
-		 * debugger stored an invalid system call number. Skip
-		 * the system call and the system call restart handling.
+		 * As tracesys_next does not set %r28 to -ENOSYS
+		 * when %r20 is set to -1, initialize it here.
 		 */
-		regs->gr[20] = -1UL;
-		goto out;
+		regs->gr[28] = -ENOSYS;
+
+		if (rc) {
+			/*
+			 * A nonzero return code from
+			 * tracehook_report_syscall_entry() tells us
+			 * to prevent the syscall execution.  Skip
+			 * the syscall call and the syscall restart handling.
+			 *
+			 * Note that the tracer may also just change
+			 * regs->gr[20] to an invalid syscall number,
+			 * that is handled by tracesys_next.
+			 */
+			regs->gr[20] = -1UL;
+			return -1;
+		}
 	}
 
 	/* Do the secure computing check after ptrace. */
@@ -340,7 +354,6 @@ long do_syscall_trace_enter(struct pt_regs *regs)
 			regs->gr[24] & 0xffffffff,
 			regs->gr[23] & 0xffffffff);
 
-out:
 	/*
 	 * Sign extend the syscall number to 64bit since it may have been
 	 * modified by a compat ptrace call

arch/powerpc/platforms/powernv/pci-ioda.c

@@ -1593,6 +1593,8 @@ static void pnv_ioda_setup_vf_PE(struct pci_dev *pdev, u16 num_vfs)
 
 		pnv_pci_ioda2_setup_dma_pe(phb, pe);
 #ifdef CONFIG_IOMMU_API
+		iommu_register_group(&pe->table_group,
+				pe->phb->hose->global_number, pe->pe_number);
 		pnv_ioda_setup_bus_iommu_group(pe, &pe->table_group, NULL);
 #endif
 	}

arch/powerpc/platforms/powernv/pci.c

@@ -1147,6 +1147,8 @@ static int pnv_tce_iommu_bus_notifier(struct notifier_block *nb,
 			return 0;
 
 		pe = &phb->ioda.pe_array[pdn->pe_number];
+		if (!pe->table_group.group)
+			return 0;
 		iommu_add_device(&pe->table_group, dev);
 		return 0;
 	case BUS_NOTIFY_DEL_DEVICE:

arch/s390/kvm/vsie.c

@@ -297,7 +297,7 @@ static int shadow_crycb(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 	scb_s->crycbd = 0;
 
 	apie_h = vcpu->arch.sie_block->eca & ECA_APIE;
-	if (!apie_h && !key_msk)
+	if (!apie_h && (!key_msk || fmt_o == CRYCB_FORMAT0))
 		return 0;
 
 	if (!crycb_addr)

arch/sh/boot/dts/Makefile

@@ -1,3 +1,3 @@
 ifneq ($(CONFIG_BUILTIN_DTB_SOURCE),"")
-obj-y += $(patsubst "%",%,$(CONFIG_BUILTIN_DTB_SOURCE)).dtb.o
+obj-$(CONFIG_USE_BUILTIN_DTB) += $(patsubst "%",%,$(CONFIG_BUILTIN_DTB_SOURCE)).dtb.o
 endif

arch/x86/include/asm/hyperv-tlfs.h

@@ -841,7 +841,7 @@ union hv_gpa_page_range {
  * count is equal with how many entries of union hv_gpa_page_range can
  * be populated into the input parameter page.
  */
-#define HV_MAX_FLUSH_REP_COUNT (PAGE_SIZE - 2 * sizeof(u64) /	\
+#define HV_MAX_FLUSH_REP_COUNT ((PAGE_SIZE - 2 * sizeof(u64)) /	\
 				sizeof(union hv_gpa_page_range))
 
 struct hv_guest_mapping_flush_list {

arch/x86/include/asm/kvm_host.h

@@ -299,6 +299,7 @@ union kvm_mmu_extended_role {
 		unsigned int cr4_smap:1;
 		unsigned int cr4_smep:1;
 		unsigned int cr4_la57:1;
+		unsigned int maxphyaddr:6;
 	};
 };
 
@@ -397,6 +398,7 @@ struct kvm_mmu {
 	void (*update_pte)(struct kvm_vcpu *vcpu, struct kvm_mmu_page *sp,
 			   u64 *spte, const void *pte);
 	hpa_t root_hpa;
+	gpa_t root_cr3;
 	union kvm_mmu_role mmu_role;
 	u8 root_level;
 	u8 shadow_root_level;

arch/x86/include/asm/uaccess.h

@@ -284,7 +284,7 @@ do {									\
 		__put_user_goto(x, ptr, "l", "k", "ir", label);		\
 		break;							\
 	case 8:								\
-		__put_user_goto_u64((__typeof__(*ptr))(x), ptr, label);	\
+		__put_user_goto_u64(x, ptr, label);			\
 		break;							\
 	default:							\
 		__put_user_bad();					\
@@ -431,8 +431,10 @@ do {									\
 ({								\
 	__label__ __pu_label;					\
 	int __pu_err = -EFAULT;					\
+	__typeof__(*(ptr)) __pu_val;				\
+	__pu_val = x;						\
 	__uaccess_begin();					\
-	__put_user_size((x), (ptr), (size), __pu_label);	\
+	__put_user_size(__pu_val, (ptr), (size), __pu_label);	\
 	__pu_err = 0;						\
 __pu_label:							\
 	__uaccess_end();					\

arch/x86/kvm/cpuid.c

@@ -335,6 +335,7 @@ static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 	unsigned f_xsaves = kvm_x86_ops->xsaves_supported() ? F(XSAVES) : 0;
 	unsigned f_umip = kvm_x86_ops->umip_emulated() ? F(UMIP) : 0;
 	unsigned f_intel_pt = kvm_x86_ops->pt_supported() ? F(INTEL_PT) : 0;
+	unsigned f_la57 = 0;
 
 	/* cpuid 1.edx */
 	const u32 kvm_cpuid_1_edx_x86_features =
@@ -489,7 +490,10 @@ static inline int __do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
 			// TSC_ADJUST is emulated
 			entry->ebx |= F(TSC_ADJUST);
 			entry->ecx &= kvm_cpuid_7_0_ecx_x86_features;
+			f_la57 = entry->ecx & F(LA57);
 			cpuid_mask(&entry->ecx, CPUID_7_ECX);
+			/* Set LA57 based on hardware capability. */
+			entry->ecx |= f_la57;
 			entry->ecx |= f_umip;
 			/* PKU is not yet implemented for shadow paging. */
 			if (!tdp_enabled || !boot_cpu_has(X86_FEATURE_OSPKE))

arch/x86/kvm/mmu.c

@@ -3555,6 +3555,7 @@ void kvm_mmu_free_roots(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu,
 							   &invalid_list);
 			mmu->root_hpa = INVALID_PAGE;
 		}
+		mmu->root_cr3 = 0;
 	}
 
 	kvm_mmu_commit_zap_page(vcpu->kvm, &invalid_list);
@@ -3610,6 +3611,7 @@ static int mmu_alloc_direct_roots(struct kvm_vcpu *vcpu)
 		vcpu->arch.mmu->root_hpa = __pa(vcpu->arch.mmu->pae_root);
 	} else
 		BUG();
+	vcpu->arch.mmu->root_cr3 = vcpu->arch.mmu->get_cr3(vcpu);
 
 	return 0;
 }
@@ -3618,10 +3620,11 @@ static int mmu_alloc_shadow_roots(struct kvm_vcpu *vcpu)
 {
 	struct kvm_mmu_page *sp;
 	u64 pdptr, pm_mask;
-	gfn_t root_gfn;
+	gfn_t root_gfn, root_cr3;
 	int i;
 
-	root_gfn = vcpu->arch.mmu->get_cr3(vcpu) >> PAGE_SHIFT;
+	root_cr3 = vcpu->arch.mmu->get_cr3(vcpu);
+	root_gfn = root_cr3 >> PAGE_SHIFT;
 
 	if (mmu_check_root(vcpu, root_gfn))
 		return 1;
@@ -3646,7 +3649,7 @@ static int mmu_alloc_shadow_roots(struct kvm_vcpu *vcpu)
 		++sp->root_count;
 		spin_unlock(&vcpu->kvm->mmu_lock);
 		vcpu->arch.mmu->root_hpa = root;
-		return 0;
+		goto set_root_cr3;
 	}
 
 	/*
@@ -3712,6 +3715,9 @@ static int mmu_alloc_shadow_roots(struct kvm_vcpu *vcpu)
 		vcpu->arch.mmu->root_hpa = __pa(vcpu->arch.mmu->lm_root);
 	}
 
+set_root_cr3:
+	vcpu->arch.mmu->root_cr3 = root_cr3;
+
 	return 0;
 }
 
@@ -4163,7 +4169,7 @@ static bool cached_root_available(struct kvm_vcpu *vcpu, gpa_t new_cr3,
 	struct kvm_mmu_root_info root;
 	struct kvm_mmu *mmu = vcpu->arch.mmu;
 
-	root.cr3 = mmu->get_cr3(vcpu);
+	root.cr3 = mmu->root_cr3;
 	root.hpa = mmu->root_hpa;
 
 	for (i = 0; i < KVM_MMU_NUM_PREV_ROOTS; i++) {
@@ -4176,6 +4182,7 @@ static bool cached_root_available(struct kvm_vcpu *vcpu, gpa_t new_cr3,
 	}
 
 	mmu->root_hpa = root.hpa;
+	mmu->root_cr3 = root.cr3;
 
 	return i < KVM_MMU_NUM_PREV_ROOTS;
 }
@@ -4770,6 +4777,7 @@ static union kvm_mmu_extended_role kvm_calc_mmu_role_ext(struct kvm_vcpu *vcpu)
 	ext.cr4_pse = !!is_pse(vcpu);
 	ext.cr4_pke = !!kvm_read_cr4_bits(vcpu, X86_CR4_PKE);
 	ext.cr4_la57 = !!kvm_read_cr4_bits(vcpu, X86_CR4_LA57);
+	ext.maxphyaddr = cpuid_maxphyaddr(vcpu);
 
 	ext.valid = 1;
 
@@ -5516,11 +5524,13 @@ int kvm_mmu_create(struct kvm_vcpu *vcpu)
 	vcpu->arch.walk_mmu = &vcpu->arch.root_mmu;
 
 	vcpu->arch.root_mmu.root_hpa = INVALID_PAGE;
+	vcpu->arch.root_mmu.root_cr3 = 0;
 	vcpu->arch.root_mmu.translate_gpa = translate_gpa;
 	for (i = 0; i < KVM_MMU_NUM_PREV_ROOTS; i++)
 		vcpu->arch.root_mmu.prev_roots[i] = KVM_MMU_ROOT_INFO_INVALID;
 
 	vcpu->arch.guest_mmu.root_hpa = INVALID_PAGE;
+	vcpu->arch.guest_mmu.root_cr3 = 0;
 	vcpu->arch.guest_mmu.translate_gpa = translate_gpa;
 	for (i = 0; i < KVM_MMU_NUM_PREV_ROOTS; i++)
 		vcpu->arch.guest_mmu.prev_roots[i] = KVM_MMU_ROOT_INFO_INVALID;

arch/x86/mm/extable.c

@@ -117,67 +117,11 @@ __visible bool ex_handler_fprestore(const struct exception_table_entry *fixup,
 }
 EXPORT_SYMBOL_GPL(ex_handler_fprestore);
 
-/* Helper to check whether a uaccess fault indicates a kernel bug. */
-static bool bogus_uaccess(struct pt_regs *regs, int trapnr,
-			  unsigned long fault_addr)
-{
-	/* This is the normal case: #PF with a fault address in userspace. */
-	if (trapnr == X86_TRAP_PF && fault_addr < TASK_SIZE_MAX)
-		return false;
-
-	/*
-	 * This code can be reached for machine checks, but only if the #MC
-	 * handler has already decided that it looks like a candidate for fixup.
-	 * This e.g. happens when attempting to access userspace memory which
-	 * the CPU can't access because of uncorrectable bad memory.
-	 */
-	if (trapnr == X86_TRAP_MC)
-		return false;
-
-	/*
-	 * There are two remaining exception types we might encounter here:
-	 *  - #PF for faulting accesses to kernel addresses
-	 *  - #GP for faulting accesses to noncanonical addresses
-	 * Complain about anything else.
-	 */
-	if (trapnr != X86_TRAP_PF && trapnr != X86_TRAP_GP) {
-		WARN(1, "unexpected trap %d in uaccess\n", trapnr);
-		return false;
-	}
-
-	/*
-	 * This is a faulting memory access in kernel space, on a kernel
-	 * address, in a usercopy function. This can e.g. be caused by improper
-	 * use of helpers like __put_user and by improper attempts to access
-	 * userspace addresses in KERNEL_DS regions.
-	 * The one (semi-)legitimate exception are probe_kernel_{read,write}(),
-	 * which can be invoked from places like kgdb, /dev/mem (for reading)
-	 * and privileged BPF code (for reading).
-	 * The probe_kernel_*() functions set the kernel_uaccess_faults_ok flag
-	 * to tell us that faulting on kernel addresses, and even noncanonical
-	 * addresses, in a userspace accessor does not necessarily imply a
-	 * kernel bug, root might just be doing weird stuff.
-	 */
-	if (current->kernel_uaccess_faults_ok)
-		return false;
-
-	/* This is bad. Refuse the fixup so that we go into die(). */
-	if (trapnr == X86_TRAP_PF) {
-		pr_emerg("BUG: pagefault on kernel address 0x%lx in non-whitelisted uaccess\n",
-			 fault_addr);
-	} else {
-		pr_emerg("BUG: GPF in non-whitelisted uaccess (non-canonical address?)\n");
-	}
-	return true;
-}
-
 __visible bool ex_handler_uaccess(const struct exception_table_entry *fixup,
 				  struct pt_regs *regs, int trapnr,
 				  unsigned long error_code,
 				  unsigned long fault_addr)
 {
-	if (bogus_uaccess(regs, trapnr, fault_addr))
-		return false;
 	regs->ip = ex_fixup_addr(fixup);
 	return true;
 }
@@ -188,8 +132,6 @@ __visible bool ex_handler_ext(const struct exception_table_entry *fixup,
 			      unsigned long error_code,
 			      unsigned long fault_addr)
 {
-	if (bogus_uaccess(regs, trapnr, fault_addr))
-		return false;
 	/* Special hack for uaccess_err */
 	current->thread.uaccess_err = 1;
 	regs->ip = ex_fixup_addr(fixup);

crypto/af_alg.c

@@ -122,8 +122,10 @@ static void alg_do_release(const struct af_alg_type *type, void *private)
 
 int af_alg_release(struct socket *sock)
 {
-	if (sock->sk)
+	if (sock->sk) {
 		sock_put(sock->sk);
+		sock->sk = NULL;
+	}
 	return 0;
 }
 EXPORT_SYMBOL_GPL(af_alg_release);

drivers/base/power/runtime.c

@@ -95,7 +95,7 @@ static void __update_runtime_status(struct device *dev, enum rpm_status status)
 static void pm_runtime_deactivate_timer(struct device *dev)
 {
 	if (dev->power.timer_expires > 0) {
-		hrtimer_cancel(&dev->power.suspend_timer);
+		hrtimer_try_to_cancel(&dev->power.suspend_timer);
 		dev->power.timer_expires = 0;
 	}
 }

drivers/clk/at91/at91sam9x5.c

@@ -144,8 +144,7 @@ static void __init at91sam9x5_pmc_setup(struct device_node *np,
 		return;
 
 	at91sam9x5_pmc = pmc_data_allocate(PMC_MAIN + 1,
-					   nck(at91sam9x5_systemck),
-					   nck(at91sam9x35_periphck), 0);
+					   nck(at91sam9x5_systemck), 31, 0);
 	if (!at91sam9x5_pmc)
 		return;
 
@@ -210,7 +209,7 @@ static void __init at91sam9x5_pmc_setup(struct device_node *np,
 	parent_names[1] = "mainck";
 	parent_names[2] = "plladivck";
 	parent_names[3] = "utmick";
-	parent_names[4] = "mck";
+	parent_names[4] = "masterck";
 	for (i = 0; i < 2; i++) {
 		char name[6];
 

drivers/clk/at91/sama5d2.c

@@ -240,7 +240,7 @@ static void __init sama5d2_pmc_setup(struct device_node *np)
 	parent_names[1] = "mainck";
 	parent_names[2] = "plladivck";
 	parent_names[3] = "utmick";
-	parent_names[4] = "mck";
+	parent_names[4] = "masterck";
 	for (i = 0; i < 3; i++) {
 		char name[6];
 
@@ -291,7 +291,7 @@ static void __init sama5d2_pmc_setup(struct device_node *np)
 	parent_names[1] = "mainck";
 	parent_names[2] = "plladivck";
 	parent_names[3] = "utmick";
-	parent_names[4] = "mck";
+	parent_names[4] = "masterck";
 	parent_names[5] = "audiopll_pmcck";
 	for (i = 0; i < ARRAY_SIZE(sama5d2_gck); i++) {
 		hw = at91_clk_register_generated(regmap, &pmc_pcr_lock,

drivers/clk/at91/sama5d4.c

@@ -207,7 +207,7 @@ static void __init sama5d4_pmc_setup(struct device_node *np)
 	parent_names[1] = "mainck";
 	parent_names[2] = "plladivck";
 	parent_names[3] = "utmick";
-	parent_names[4] = "mck";
+	parent_names[4] = "masterck";
 	for (i = 0; i < 3; i++) {
 		char name[6];
 

drivers/clk/sunxi-ng/ccu-sun6i-a31.c

@@ -264,9 +264,9 @@ static SUNXI_CCU_GATE(ahb1_mmc1_clk,	"ahb1-mmc1",	"ahb1",
 static SUNXI_CCU_GATE(ahb1_mmc2_clk,	"ahb1-mmc2",	"ahb1",
 		      0x060, BIT(10), 0);
 static SUNXI_CCU_GATE(ahb1_mmc3_clk,	"ahb1-mmc3",	"ahb1",
-		      0x060, BIT(12), 0);
+		      0x060, BIT(11), 0);
 static SUNXI_CCU_GATE(ahb1_nand1_clk,	"ahb1-nand1",	"ahb1",
-		      0x060, BIT(13), 0);
+		      0x060, BIT(12), 0);
 static SUNXI_CCU_GATE(ahb1_nand0_clk,	"ahb1-nand0",	"ahb1",
 		      0x060, BIT(13), 0);
 static SUNXI_CCU_GATE(ahb1_sdram_clk,	"ahb1-sdram",	"ahb1",

drivers/clk/sunxi-ng/ccu-sun8i-v3s.c

@@ -542,7 +542,7 @@ static struct ccu_reset_map sun8i_v3s_ccu_resets[] = {
 	[RST_BUS_OHCI0]		=  { 0x2c0, BIT(29) },
 
 	[RST_BUS_VE]		=  { 0x2c4, BIT(0) },
-	[RST_BUS_TCON0]		=  { 0x2c4, BIT(3) },
+	[RST_BUS_TCON0]		=  { 0x2c4, BIT(4) },
 	[RST_BUS_CSI]		=  { 0x2c4, BIT(8) },
 	[RST_BUS_DE]		=  { 0x2c4, BIT(12) },
 	[RST_BUS_DBG]		=  { 0x2c4, BIT(31) },

drivers/cpufreq/scmi-cpufreq.c

@@ -187,8 +187,8 @@ static int scmi_cpufreq_exit(struct cpufreq_policy *policy)
 
 	cpufreq_cooling_unregister(priv->cdev);
 	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
-	kfree(priv);
 	dev_pm_opp_remove_all_dynamic(priv->cpu_dev);
+	kfree(priv);
 
 	return 0;
 }

drivers/crypto/ccree/cc_pm.h

@@ -30,7 +30,7 @@ static inline int cc_pm_init(struct cc_drvdata *drvdata)
 	return 0;
 }
 
-static void cc_pm_go(struct cc_drvdata *drvdata) {}
+static inline void cc_pm_go(struct cc_drvdata *drvdata) {}
 
 static inline void cc_pm_fini(struct cc_drvdata *drvdata) {}
 

drivers/gpio/gpio-mt7621.c

@@ -30,6 +30,7 @@
 #define GPIO_REG_EDGE		0xA0
 
 struct mtk_gc {
+	struct irq_chip irq_chip;
 	struct gpio_chip chip;
 	spinlock_t lock;
 	int bank;
@@ -189,13 +190,6 @@ mediatek_gpio_irq_type(struct irq_data *d, unsigned int type)
 	return 0;
 }
 
-static struct irq_chip mediatek_gpio_irq_chip = {
-	.irq_unmask		= mediatek_gpio_irq_unmask,
-	.irq_mask		= mediatek_gpio_irq_mask,
-	.irq_mask_ack		= mediatek_gpio_irq_mask,
-	.irq_set_type		= mediatek_gpio_irq_type,
-};
-
 static int
 mediatek_gpio_xlate(struct gpio_chip *chip,
 		    const struct of_phandle_args *spec, u32 *flags)
@@ -254,6 +248,13 @@ mediatek_gpio_bank_probe(struct device *dev,
 		return ret;
 	}
 
+	rg->irq_chip.name = dev_name(dev);
+	rg->irq_chip.parent_device = dev;
+	rg->irq_chip.irq_unmask = mediatek_gpio_irq_unmask;
+	rg->irq_chip.irq_mask = mediatek_gpio_irq_mask;
+	rg->irq_chip.irq_mask_ack = mediatek_gpio_irq_mask;
+	rg->irq_chip.irq_set_type = mediatek_gpio_irq_type;
+
 	if (mtk->gpio_irq) {
 		/*
 		 * Manually request the irq here instead of passing
@@ -270,14 +271,14 @@ mediatek_gpio_bank_probe(struct device *dev,
 			return ret;
 		}
 
-		ret = gpiochip_irqchip_add(&rg->chip, &mediatek_gpio_irq_chip,
+		ret = gpiochip_irqchip_add(&rg->chip, &rg->irq_chip,
 					   0, handle_simple_irq, IRQ_TYPE_NONE);
 		if (ret) {
 			dev_err(dev, "failed to add gpiochip_irqchip\n");
 			return ret;
 		}
 
-		gpiochip_set_chained_irqchip(&rg->chip, &mediatek_gpio_irq_chip,
+		gpiochip_set_chained_irqchip(&rg->chip, &rg->irq_chip,
 					     mtk->gpio_irq, NULL);
 	}
 
@@ -310,7 +311,6 @@ mediatek_gpio_probe(struct platform_device *pdev)
 	mtk->gpio_irq = irq_of_parse_and_map(np, 0);
 	mtk->dev = dev;
 	platform_set_drvdata(pdev, mtk);
-	mediatek_gpio_irq_chip.name = dev_name(dev);
 
 	for (i = 0; i < MTK_BANK_CNT; i++) {
 		ret = mediatek_gpio_bank_probe(dev, np, i);

drivers/gpio/gpio-pxa.c

@@ -245,6 +245,7 @@ static bool pxa_gpio_has_pinctrl(void)
 {
 	switch (gpio_type) {
 	case PXA3XX_GPIO:
+	case MMP2_GPIO:
 		return false;
 
 	default:

drivers/gpu/drm/amd/amdgpu/amdgpu_kms.c

@@ -212,6 +212,7 @@ int amdgpu_driver_load_kms(struct drm_device *dev, unsigned long flags)
 	}
 
 	if (amdgpu_device_is_px(dev)) {
+		dev_pm_set_driver_flags(dev->dev, DPM_FLAG_NEVER_SKIP);
 		pm_runtime_use_autosuspend(dev->dev);
 		pm_runtime_set_autosuspend_delay(dev->dev, 5000);
 		pm_runtime_set_active(dev->dev);

drivers/gpu/drm/amd/amdgpu/amdgpu_mode.h

@@ -405,6 +405,7 @@ struct amdgpu_crtc {
 	struct amdgpu_flip_work *pflip_works;
 	enum amdgpu_flip_status pflip_status;
 	int deferred_flip_completion;
+	u64 last_flip_vblank;
 	/* pll sharing */
 	struct amdgpu_atom_ss ss;
 	bool ss_enabled;

drivers/gpu/drm/amd/amdgpu/amdgpu_vm.c

@@ -638,12 +638,14 @@ void amdgpu_vm_move_to_lru_tail(struct amdgpu_device *adev,
 	struct ttm_bo_global *glob = adev->mman.bdev.glob;
 	struct amdgpu_vm_bo_base *bo_base;
 
+#if 0
 	if (vm->bulk_moveable) {
 		spin_lock(&glob->lru_lock);
 		ttm_bo_bulk_move_lru_tail(&vm->lru_bulk_move);
 		spin_unlock(&glob->lru_lock);
 		return;
 	}
+#endif
 
 	memset(&vm->lru_bulk_move, 0, sizeof(vm->lru_bulk_move));
 

drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c

@@ -128,7 +128,7 @@ static const struct soc15_reg_golden golden_settings_sdma0_4_2_init[] = {
 
 static const struct soc15_reg_golden golden_settings_sdma0_4_2[] =
 {
-	SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_CHICKEN_BITS, 0xfe931f07, 0x02831d07),
+	SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_CHICKEN_BITS, 0xfe931f07, 0x02831f07),
 	SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_CLK_CTRL, 0xffffffff, 0x3f000100),
 	SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_GB_ADDR_CONFIG, 0x0000773f, 0x00004002),
 	SOC15_REG_GOLDEN_VALUE(SDMA0, 0, mmSDMA0_GB_ADDR_CONFIG_READ, 0x0000773f, 0x00004002),
@@ -158,7 +158,7 @@ static const struct soc15_reg_golden golden_settings_sdma0_4_2[] =
 };
 
 static const struct soc15_reg_golden golden_settings_sdma1_4_2[] = {
-	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_CHICKEN_BITS, 0xfe931f07, 0x02831d07),
+	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_CHICKEN_BITS, 0xfe931f07, 0x02831f07),
 	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_CLK_CTRL, 0xffffffff, 0x3f000100),
 	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_GB_ADDR_CONFIG, 0x0000773f, 0x00004002),
 	SOC15_REG_GOLDEN_VALUE(SDMA1, 0, mmSDMA1_GB_ADDR_CONFIG_READ, 0x0000773f, 0x00004002),

drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c

@@ -303,12 +303,11 @@ static void dm_pflip_high_irq(void *interrupt_params)
 		return;
 	}
 
+	/* Update to correct count(s) if racing with vblank irq */
+	amdgpu_crtc->last_flip_vblank = drm_crtc_accurate_vblank_count(&amdgpu_crtc->base);
 
 	/* wake up userspace */
 	if (amdgpu_crtc->event) {
-		/* Update to correct count(s) if racing with vblank irq */
-		drm_crtc_accurate_vblank_count(&amdgpu_crtc->base);
-
 		drm_crtc_send_vblank_event(&amdgpu_crtc->base, amdgpu_crtc->event);
 
 		/* page flip completed. clean up */
@@ -786,12 +785,13 @@ static int dm_suspend(void *handle)
 	struct amdgpu_display_manager *dm = &adev->dm;
 	int ret = 0;
 
+	WARN_ON(adev->dm.cached_state);
+	adev->dm.cached_state = drm_atomic_helper_suspend(adev->ddev);
+
 	s3_handle_mst(adev->ddev, true);
 
 	amdgpu_dm_irq_suspend(adev);
 
-	WARN_ON(adev->dm.cached_state);
-	adev->dm.cached_state = drm_atomic_helper_suspend(adev->ddev);
 
 	dc_set_power_state(dm->dc, DC_ACPI_CM_POWER_STATE_D3);
 
@@ -4827,6 +4827,8 @@ static void amdgpu_dm_commit_planes(struct drm_atomic_state *state,
 			to_dm_crtc_state(drm_atomic_get_old_crtc_state(state, pcrtc));
 	int planes_count = 0;
 	unsigned long flags;
+	u64 last_flip_vblank;
+	bool vrr_active = acrtc_state->freesync_config.state == VRR_STATE_ACTIVE_VARIABLE;
 
 	/* update planes when needed */
 	for_each_oldnew_plane_in_state(state, plane, old_plane_state, new_plane_state, i) {
@@ -4858,6 +4860,16 @@ static void amdgpu_dm_commit_planes(struct drm_atomic_state *state,
 			/* In commit tail framework this cannot happen */
 			WARN_ON(1);
 		}
+
+		/* For variable refresh rate mode only:
+		 * Get vblank of last completed flip to avoid > 1 vrr flips per
+		 * video frame by use of throttling, but allow flip programming
+		 * anywhere in the possibly large variable vrr vblank interval
+		 * for fine-grained flip timing control and more opportunity to
+		 * avoid stutter on late submission of amdgpu_dm_do_flip() calls.
+		 */
+		last_flip_vblank = acrtc_attach->last_flip_vblank;
+
 		spin_unlock_irqrestore(&crtc->dev->event_lock, flags);
 
 		if (!pflip_needed || plane->type == DRM_PLANE_TYPE_OVERLAY) {
@@ -4881,10 +4893,18 @@ static void amdgpu_dm_commit_planes(struct drm_atomic_state *state,
 			if (plane->type == DRM_PLANE_TYPE_PRIMARY)
 				drm_crtc_vblank_get(crtc);
 
+			/* Use old throttling in non-vrr fixed refresh rate mode
+			 * to keep flip scheduling based on target vblank counts
+			 * working in a backwards compatible way, e.g., clients
+			 * using GLX_OML_sync_control extension.
+			 */
+			if (!vrr_active)
+				last_flip_vblank = drm_crtc_vblank_count(crtc);
+
 			amdgpu_dm_do_flip(
 				crtc,
 				fb,
-				(uint32_t)drm_crtc_vblank_count(crtc) + *wait_for_vblank,
+				(uint32_t) last_flip_vblank + *wait_for_vblank,
 				dc_state);
 		}
 

drivers/gpu/drm/amd/display/dc/dce/dce_clk_mgr.c

@@ -662,6 +662,11 @@ static void dce11_update_clocks(struct clk_mgr *clk_mgr,
 {
 	struct dce_clk_mgr *clk_mgr_dce = TO_DCE_CLK_MGR(clk_mgr);
 	struct dm_pp_power_level_change_request level_change_req;
+	int patched_disp_clk = context->bw.dce.dispclk_khz;
+
+	/*TODO: W/A for dal3 linux, investigate why this works */
+	if (!clk_mgr_dce->dfs_bypass_active)
+		patched_disp_clk = patched_disp_clk * 115 / 100;
 
 	level_change_req.power_level = dce_get_required_clocks_state(clk_mgr, context);
 	/* get max clock state from PPLIB */
@@ -671,9 +676,9 @@ static void dce11_update_clocks(struct clk_mgr *clk_mgr,
 			clk_mgr_dce->cur_min_clks_state = level_change_req.power_level;
 	}
 
-	if (should_set_clock(safe_to_lower, context->bw.dce.dispclk_khz, clk_mgr->clks.dispclk_khz)) {
-		context->bw.dce.dispclk_khz = dce_set_clock(clk_mgr, context->bw.dce.dispclk_khz);
-		clk_mgr->clks.dispclk_khz = context->bw.dce.dispclk_khz;
+	if (should_set_clock(safe_to_lower, patched_disp_clk, clk_mgr->clks.dispclk_khz)) {
+		context->bw.dce.dispclk_khz = dce_set_clock(clk_mgr, patched_disp_clk);
+		clk_mgr->clks.dispclk_khz = patched_disp_clk;
 	}
 	dce11_pplib_apply_display_requirements(clk_mgr->ctx->dc, context);
 }

drivers/gpu/drm/amd/display/dc/dce100/dce100_hw_sequencer.h

@@ -37,6 +37,10 @@ void dce100_prepare_bandwidth(
 		struct dc *dc,
 		struct dc_state *context);
 
+void dce100_optimize_bandwidth(
+		struct dc *dc,
+		struct dc_state *context);
+
 bool dce100_enable_display_power_gating(struct dc *dc, uint8_t controller_id,
 					struct dc_bios *dcb,
 					enum pipe_gating_control power_gating);

drivers/gpu/drm/amd/display/dc/dce80/dce80_hw_sequencer.c

@@ -77,6 +77,6 @@ void dce80_hw_sequencer_construct(struct dc *dc)
 	dc->hwss.enable_display_power_gating = dce100_enable_display_power_gating;
 	dc->hwss.pipe_control_lock = dce_pipe_control_lock;
 	dc->hwss.prepare_bandwidth = dce100_prepare_bandwidth;
-	dc->hwss.optimize_bandwidth = dce100_prepare_bandwidth;
+	dc->hwss.optimize_bandwidth = dce100_optimize_bandwidth;
 }
 

drivers/gpu/drm/amd/display/dc/dce80/dce80_resource.c

@@ -790,9 +790,22 @@ bool dce80_validate_bandwidth(
 	struct dc *dc,
 	struct dc_state *context)
 {
-	/* TODO implement when needed but for now hardcode max value*/
-	context->bw.dce.dispclk_khz = 681000;
-	context->bw.dce.yclk_khz = 250000 * MEMORY_TYPE_MULTIPLIER_CZ;
+	int i;
+	bool at_least_one_pipe = false;
+
+	for (i = 0; i < dc->res_pool->pipe_count; i++) {
+		if (context->res_ctx.pipe_ctx[i].stream)
+			at_least_one_pipe = true;
+	}
+
+	if (at_least_one_pipe) {
+		/* TODO implement when needed but for now hardcode max value*/
+		context->bw.dce.dispclk_khz = 681000;
+		context->bw.dce.yclk_khz = 250000 * MEMORY_TYPE_MULTIPLIER_CZ;
+	} else {
+		context->bw.dce.dispclk_khz = 0;
+		context->bw.dce.yclk_khz = 0;
+	}
 
 	return true;
 }

drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c

@@ -2658,8 +2658,8 @@ static void dcn10_set_cursor_position(struct pipe_ctx *pipe_ctx)
 		.mirror = pipe_ctx->plane_state->horizontal_mirror
 	};
 
-	pos_cpy.x -= pipe_ctx->plane_state->dst_rect.x;
-	pos_cpy.y -= pipe_ctx->plane_state->dst_rect.y;
+	pos_cpy.x_hotspot += pipe_ctx->plane_state->dst_rect.x;
+	pos_cpy.y_hotspot += pipe_ctx->plane_state->dst_rect.y;
 
 	if (pipe_ctx->plane_state->address.type
 			== PLN_ADDR_TYPE_VIDEO_PROGRESSIVE)

drivers/gpu/drm/bochs/bochs_drv.c

@@ -154,6 +154,10 @@ static int bochs_pci_probe(struct pci_dev *pdev,
 	if (IS_ERR(dev))
 		return PTR_ERR(dev);
 
+	ret = pci_enable_device(pdev);
+	if (ret)
+		goto err_free_dev;
+
 	dev->pdev = pdev;
 	pci_set_drvdata(pdev, dev);
 

drivers/gpu/drm/drm_atomic_helper.c

@@ -1602,6 +1602,15 @@ int drm_atomic_helper_async_check(struct drm_device *dev,
 	    old_plane_state->crtc != new_plane_state->crtc)
 		return -EINVAL;
 
+	/*
+	 * FIXME: Since prepare_fb and cleanup_fb are always called on
+	 * the new_plane_state for async updates we need to block framebuffer
+	 * changes. This prevents use of a fb that's been cleaned up and
+	 * double cleanups from occuring.
+	 */
+	if (old_plane_state->fb != new_plane_state->fb)
+		return -EINVAL;
+
 	funcs = plane->helper_private;
 	if (!funcs->atomic_async_update)
 		return -EINVAL;

drivers/gpu/drm/i915/intel_fbdev.c

@@ -336,8 +336,8 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
 				    bool *enabled, int width, int height)
 {
 	struct drm_i915_private *dev_priv = to_i915(fb_helper->dev);
-	unsigned long conn_configured, conn_seq, mask;
 	unsigned int count = min(fb_helper->connector_count, BITS_PER_LONG);
+	unsigned long conn_configured, conn_seq;
 	int i, j;
 	bool *save_enabled;
 	bool fallback = true, ret = true;
@@ -355,10 +355,9 @@ static bool intel_fb_initial_config(struct drm_fb_helper *fb_helper,
 		drm_modeset_backoff(&ctx);
 
 	memcpy(save_enabled, enabled, count);
-	mask = GENMASK(count - 1, 0);
+	conn_seq = GENMASK(count - 1, 0);
 	conn_configured = 0;
 retry:
-	conn_seq = conn_configured;
 	for (i = 0; i < count; i++) {
 		struct drm_fb_helper_connector *fb_conn;
 		struct drm_connector *connector;
@@ -371,7 +370,8 @@ retry:
 		if (conn_configured & BIT(i))
 			continue;
 
-		if (conn_seq == 0 && !connector->has_tile)
+		/* First pass, only consider tiled connectors */
+		if (conn_seq == GENMASK(count - 1, 0) && !connector->has_tile)
 			continue;
 
 		if (connector->status == connector_status_connected)
@@ -475,8 +475,10 @@ retry:
 		conn_configured |= BIT(i);
 	}
 
-	if ((conn_configured & mask) != mask && conn_configured != conn_seq)
+	if (conn_configured != conn_seq) { /* repeat until no more are found */
+		conn_seq = conn_configured;
 		goto retry;
+	}
 
 	/*
 	 * If the BIOS didn't enable everything it could, fall back to have the

drivers/gpu/drm/radeon/radeon_kms.c

@@ -172,6 +172,7 @@ int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags)
 	}
 
 	if (radeon_is_px(dev)) {
+		dev_pm_set_driver_flags(dev->dev, DPM_FLAG_NEVER_SKIP);
 		pm_runtime_use_autosuspend(dev->dev);
 		pm_runtime_set_autosuspend_delay(dev->dev, 5000);
 		pm_runtime_set_active(dev->dev);

drivers/infiniband/hw/cxgb4/device.c

@@ -783,6 +783,7 @@ void c4iw_init_dev_ucontext(struct c4iw_rdev *rdev,
 static int c4iw_rdev_open(struct c4iw_rdev *rdev)
 {
 	int err;
+	unsigned int factor;
 
 	c4iw_init_dev_ucontext(rdev, &rdev->uctx);
 
@@ -806,8 +807,18 @@ static int c4iw_rdev_open(struct c4iw_rdev *rdev)
 		return -EINVAL;
 	}
 
-	rdev->qpmask = rdev->lldi.udb_density - 1;
-	rdev->cqmask = rdev->lldi.ucq_density - 1;
+	/* This implementation requires a sge_host_page_size <= PAGE_SIZE. */
+	if (rdev->lldi.sge_host_page_size > PAGE_SIZE) {
+		pr_err("%s: unsupported sge host page size %u\n",
+		       pci_name(rdev->lldi.pdev),
+		       rdev->lldi.sge_host_page_size);
+		return -EINVAL;
+	}
+
+	factor = PAGE_SIZE / rdev->lldi.sge_host_page_size;
+	rdev->qpmask = (rdev->lldi.udb_density * factor) - 1;
+	rdev->cqmask = (rdev->lldi.ucq_density * factor) - 1;
+
 	pr_debug("dev %s stag start 0x%0x size 0x%0x num stags %d pbl start 0x%0x size 0x%0x rq start 0x%0x size 0x%0x qp qid start %u size %u cq qid start %u size %u srq size %u\n",
 		 pci_name(rdev->lldi.pdev), rdev->lldi.vr->stag.start,
 		 rdev->lldi.vr->stag.size, c4iw_num_stags(rdev),

drivers/infiniband/ulp/srp/ib_srp.c

@@ -3032,7 +3032,6 @@ static int srp_reset_device(struct scsi_cmnd *scmnd)
 {
 	struct srp_target_port *target = host_to_target(scmnd->device->host);
 	struct srp_rdma_ch *ch;
-	int i, j;
 	u8 status;
 
 	shost_printk(KERN_ERR, target->scsi_host, "SRP reset_device called\n");
@@ -3044,15 +3043,6 @@ static int srp_reset_device(struct scsi_cmnd *scmnd)
 	if (status)
 		return FAILED;
 
-	for (i = 0; i < target->ch_count; i++) {
-		ch = &target->ch[i];
-		for (j = 0; j < target->req_ring_size; ++j) {
-			struct srp_request *req = &ch->req_ring[j];
-
-			srp_finish_req(ch, req, scmnd->device, DID_RESET << 16);
-		}
-	}
-
 	return SUCCESS;
 }
 

drivers/iommu/dmar.c

@@ -144,7 +144,7 @@ dmar_alloc_pci_notify_info(struct pci_dev *dev, unsigned long event)
 		for (tmp = dev; tmp; tmp = tmp->bus->self)
 			level++;
 
-	size = sizeof(*info) + level * sizeof(struct acpi_dmar_pci_path);
+	size = sizeof(*info) + level * sizeof(info->path[0]);
 	if (size <= sizeof(dmar_pci_notify_info_buf)) {
 		info = (struct dmar_pci_notify_info *)dmar_pci_notify_info_buf;
 	} else {

drivers/mailbox/bcm-flexrm-mailbox.c

@@ -1396,9 +1396,9 @@ static void flexrm_shutdown(struct mbox_chan *chan)
 
 	/* Clear ring flush state */
 	timeout = 1000; /* timeout of 1s */
-	writel_relaxed(0x0, ring + RING_CONTROL);
+	writel_relaxed(0x0, ring->regs + RING_CONTROL);
 	do {
-		if (!(readl_relaxed(ring + RING_FLUSH_DONE) &
+		if (!(readl_relaxed(ring->regs + RING_FLUSH_DONE) &
 		      FLUSH_DONE_MASK))
 			break;
 		mdelay(1);

drivers/mailbox/mailbox.c

@@ -310,6 +310,7 @@ int mbox_flush(struct mbox_chan *chan, unsigned long timeout)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(mbox_flush);
 
 /**
  * mbox_request_channel - Request a mailbox channel.

drivers/mmc/core/block.c

@@ -2380,12 +2380,6 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card,
 	snprintf(md->disk->disk_name, sizeof(md->disk->disk_name),
 		 "mmcblk%u%s", card->host->index, subname ? subname : "");
 
-	if (mmc_card_mmc(card))
-		blk_queue_logical_block_size(md->queue.queue,
-					     card->ext_csd.data_sector_size);
-	else
-		blk_queue_logical_block_size(md->queue.queue, 512);
-
 	set_capacity(md->disk, size);
 
 	if (mmc_host_cmd23(card->host)) {

drivers/mmc/core/core.c

@@ -95,7 +95,7 @@ static void mmc_should_fail_request(struct mmc_host *host,
 	if (!data)
 		return;
 
-	if (cmd->error || data->error ||
+	if ((cmd && cmd->error) || data->error ||
 	    !should_fail(&host->fail_mmc_request, data->blksz * data->blocks))
 		return;
 

drivers/mmc/core/queue.c

@@ -355,6 +355,7 @@ static void mmc_setup_queue(struct mmc_queue *mq, struct mmc_card *card)
 {
 	struct mmc_host *host = card->host;
 	u64 limit = BLK_BOUNCE_HIGH;
+	unsigned block_size = 512;
 
 	if (mmc_dev(host)->dma_mask && *mmc_dev(host)->dma_mask)
 		limit = (u64)dma_max_pfn(mmc_dev(host)) << PAGE_SHIFT;
@@ -368,7 +369,13 @@ static void mmc_setup_queue(struct mmc_queue *mq, struct mmc_card *card)
 	blk_queue_max_hw_sectors(mq->queue,
 		min(host->max_blk_count, host->max_req_size / 512));
 	blk_queue_max_segments(mq->queue, host->max_segs);
-	blk_queue_max_segment_size(mq->queue, host->max_seg_size);
+
+	if (mmc_card_mmc(card))
+		block_size = card->ext_csd.data_sector_size;
+
+	blk_queue_logical_block_size(mq->queue, block_size);
+	blk_queue_max_segment_size(mq->queue,
+			round_down(host->max_seg_size, block_size));
 
 	INIT_WORK(&mq->recovery_work, mmc_mq_recovery_handler);
 	INIT_WORK(&mq->complete_work, mmc_blk_mq_complete_work);

drivers/mmc/host/cqhci.c

@@ -201,7 +201,7 @@ static int cqhci_host_alloc_tdl(struct cqhci_host *cq_host)
 	cq_host->desc_size = cq_host->slot_sz * cq_host->num_slots;
 
 	cq_host->data_size = cq_host->trans_desc_len * cq_host->mmc->max_segs *
-		(cq_host->num_slots - 1);
+		cq_host->mmc->cqe_qdepth;
 
 	pr_debug("%s: cqhci: desc_size: %zu data_sz: %zu slot-sz: %d\n",
 		 mmc_hostname(cq_host->mmc), cq_host->desc_size, cq_host->data_size,
@@ -217,12 +217,21 @@ static int cqhci_host_alloc_tdl(struct cqhci_host *cq_host)
 						 cq_host->desc_size,
 						 &cq_host->desc_dma_base,
 						 GFP_KERNEL);
+	if (!cq_host->desc_base)
+		return -ENOMEM;
+
 	cq_host->trans_desc_base = dmam_alloc_coherent(mmc_dev(cq_host->mmc),
 					      cq_host->data_size,
 					      &cq_host->trans_desc_dma_base,
 					      GFP_KERNEL);
-	if (!cq_host->desc_base || !cq_host->trans_desc_base)
+	if (!cq_host->trans_desc_base) {
+		dmam_free_coherent(mmc_dev(cq_host->mmc), cq_host->desc_size,
+				   cq_host->desc_base,
+				   cq_host->desc_dma_base);
+		cq_host->desc_base = NULL;
+		cq_host->desc_dma_base = 0;
 		return -ENOMEM;
+	}
 
 	pr_debug("%s: cqhci: desc-base: 0x%p trans-base: 0x%p\n desc_dma 0x%llx trans_dma: 0x%llx\n",
 		 mmc_hostname(cq_host->mmc), cq_host->desc_base, cq_host->trans_desc_base,

drivers/mmc/host/mmc_spi.c

@@ -1450,6 +1450,7 @@ static int mmc_spi_probe(struct spi_device *spi)
 		mmc->caps &= ~MMC_CAP_NEEDS_POLL;
 		mmc_gpiod_request_cd_irq(mmc);
 	}
+	mmc_detect_change(mmc, 0);
 
 	/* Index 1 is write protect/read only */
 	status = mmc_gpiod_request_ro(mmc, NULL, 1, false, 0, NULL);

drivers/mmc/host/renesas_sdhi_sys_dmac.c

@@ -65,6 +65,7 @@ static const struct renesas_sdhi_of_data of_rcar_gen2_compatible = {
 	.scc_offset	= 0x0300,
 	.taps		= rcar_gen2_scc_taps,
 	.taps_num	= ARRAY_SIZE(rcar_gen2_scc_taps),
+	.max_blk_count  = 0xffffffff,
 };
 
 /* Definitions for sampling clocks */