Pull ARM fixes from Russell King:
"Three relatively small fixes for ARM:
- Roger noticed that dma_max_pfn() was calculating the upper limit
wrongly, by adding the PFN offset of memory twice.
- A fix from Robin to correct parsing of MPIDR values when the
address size is larger than one BE32 unit.
- A fix from Srinivas to ensure that we do not rely on the boot
loader (or previous Linux kernel) setting the translation table
base register a certain way in the decompressor, which can lead to
crashes"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 8618/1: decompressor: reset ttbcr fields to use TTBR0 on ARMv7
ARM: 8617/1: dma: fix dma_max_pfn()
ARM: 8616/1: dt: Respect property size when parsing CPUs
If the bootloader uses the long descriptor format and jumps to
kernel decompressor code, TTBCR may not be in a right state.
Before enabling the MMU, it is required to clear the TTBCR.PD0
field to use TTBR0 for translation table walks.
The commit dbece45894 ("ARM: 7501/1: decompressor:
reset ttbcr for VMSA ARMv7 cores") does the reset of TTBCR.N, but
doesn't consider all the bits for the size of TTBCR.N.
Clear TTBCR.PD0 field and reset all the three bits of TTBCR.N to
indicate the use of TTBR0 and the correct base address width.
Fixes: dbece45894 ("ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores")
Acked-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Srinivas Ramana <sramana@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Pull x86 fixes from Thomas Gleixner:
"The last regression fixes for 4.8 final:
- Two patches addressing the fallout of the CR4 optimizations which
caused CR4-less machines to fail.
- Fix the VDSO build on big endian machines
- Take care of FPU initialization if no CPUID is available otherwise
task struct size ends up being zero
- Fix up context tracking in case load_gs_index fails"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/entry/64: Fix context tracking state warning when load_gs_index fails
x86/boot: Initialize FPU and X86_FEATURE_ALWAYS even if we don't have CPUID
x86/vdso: Fix building on big endian host
x86/boot: Fix another __read_cr4() case on 486
x86/init: Fix cr4_init_shadow() on CR4-less machines
Pull sparc fixes from David Miller:
1) Fix section mismatches in some builds, from Paul Gortmaker.
2) Need to count huge zero page mappings when doing TSB sizing, from
Mike Kravetz.
3) Fix handing of cpu_possible_mask when nr_cpus module option is
specified, from Atish Patra.
4) Don't allocate irq stacks until nr_irqs has been processed, also
from Atish Patra.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Fix non-SMP build.
sparc64: Fix irq stack bootmem allocation.
sparc64: Fix cpu_possible_mask if nr_cpus is set
sparc64 mm: Fix more TSB sizing issues
sparc64: fix section mismatch in find_numa_latencies_for_group
Pull networking fixes from David Miller:
1) Fix wrong TCP checksums on MTU probing when checksum offloading is
disabled, from Douglas Caetano dos Santos.
2) Fix qdisc backlog updates in qfq and sfb schedulers, from Cong Wang.
3) Route lookup flow key protocol value is wrong in ip6gre_xmit_other(),
fix from Lance Richardson.
4) Scheduling while atomic in multicast routing code of ipv4 and ipv6,
fix from Nikolay Aleksandrov.
5) Fix packet alignment in fec driver, from Eric Nelson.
6) Fix perf regression in sctp due to struct layout and cache misses,
from Xin Long.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
sctp: fix the issue sctp_diag uses lock_sock in rcu_read_lock
sctp: change to check peer prsctp_capable when using prsctp polices
sctp: remove prsctp_param from sctp_chunk
sctp: move sent_count to the memory hole in sctp_chunk
tg3: Avoid NULL pointer dereference in tg3_io_error_detected()
act_ife: Fix false encoding
act_ife: Fix external mac header on encode
VSOCK: Don't dec ack backlog twice for rejected connections
Revert "net: ethernet: bcmgenet: use phydev from struct net_device"
net: fec: align IP header in hardware
net: fec: remove QUIRK_HAS_RACC from i.mx27
net: fec: remove QUIRK_HAS_RACC from i.mx25
ipmr, ip6mr: fix scheduling while atomic and a deadlock with ipmr_get_route
ip6_gre: fix flowi6_proto value in ip6gre_xmit_other()
tcp: fix a compile error in DBGUNDO()
tcp: fix wrong checksum calculation on MTU probing
sch_sfb: keep backlog updated with qlen
sch_qfq: keep backlog updated with qlen
can: dev: fix deadlock reported after bus-off
When discovering the number of VPEs per core, smp_num_siblings will be
incorrect for kernels built without support for the MIPS MultiThreading
(MT) ASE running on systems which implement said ASE. This leads to
accesses to VPEs in secondary cores being performed incorrectly since
mips_cm_vp_id calculates the wrong ID to write to the local "other"
registers. Fix this by examining the number of VPEs in the core as
reported by the CM.
This patch presumes that the number of VPEs will be the same in each
core of the system. As this path only applies to systems with CM version
2.5 or lower, and this property is true of all such known systems, this
is likely to be fine but is described in a comment for good measure.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14338/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull SCSI fix from James Bottomley:
"One final fix before 4.8.
There was a memory leak triggered by turning scsi mq off due to the
fact that we assume on host release that the already running hosts
weren't mq based because that's the state of the global flag (even
though they were).
Fix it by tracking this on a per host host basis"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: Avoid that toggling use_blk_mq triggers a memory leak
Pull input fix from Dmitry Torokhov:
"One small change to make joydev (which is used by older games) to bind
to devices that export Z axis but not X or Y (such as TRC rudder)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: joydev - recognize devices with Z axis as joysticks
Merge more fixes from Andrew Morton:
"Three fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
include/linux/property.h: fix typo/compile error
ocfs2: fix deadlock on mmapped page in ocfs2_write_begin_nolock()
mm: workingset: fix crash in shadow node shrinker caused by replace_page_cache_page()
This fixes commit d76eebfa17 ("include/linux/property.h: fix build
issues with gcc-4.4.4").
With that commit we get the following compile error when using the
PROPERTY_ENTRY_INTEGER_ARRAY macro.
include/linux/property.h:201:39: error: `u32_data' undeclared (first
use in this function)
PROPERTY_ENTRY_INTEGER_ARRAY(_name_, u32, _val_)
^
include/linux/property.h:193:17: note: in definition of macro
`PROPERTY_ENTRY_INTEGER_ARRAY'
{ .pointer = { _type_##_data = _val_ } }, \
^
This needs a '.' to reference the union member. It seems this was just
overlooked here since it is done correctly in similar constructs in
other parts of the original commit.
This fix is in preparation of upcoming commits that will use this macro.
Fixes: commit d76eebfa17 ("include/linux/property.h: fix build issues with gcc-4.4.4")
Link: http://lkml.kernel.org/r/2de3b929290d88a723ed829a3e3cbd02044714df.1475114627.git.johnyoun@synopsys.com
Signed-off-by: John Youn <johnyoun@synopsys.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The testcase "mmaptruncate" of ocfs2-test deadlocks occasionally.
In this testcase, we create a 2*CLUSTER_SIZE file and mmap() on it;
there are 2 process repeatedly performing the following operations
respectively: one is doing memset(mmaped_addr + 2*CLUSTER_SIZE - 1, 'a',
1), while the another is playing ftruncate(fd, 2*CLUSTER_SIZE) and then
ftruncate(fd, CLUSTER_SIZE) again and again.
This is the backtrace when the deadlock happens:
__wait_on_bit_lock+0x50/0xa0
__lock_page+0xb7/0xc0
ocfs2_write_begin_nolock+0x163f/0x1790 [ocfs2]
ocfs2_page_mkwrite+0x1c7/0x2a0 [ocfs2]
do_page_mkwrite+0x66/0xc0
handle_mm_fault+0x685/0x1350
__do_page_fault+0x1d8/0x4d0
trace_do_page_fault+0x37/0xf0
do_async_page_fault+0x19/0x70
async_page_fault+0x28/0x30
In ocfs2_write_begin_nolock(), we first grab the pages and then allocate
disk space for this write; ocfs2_try_to_free_truncate_log() will be
called if -ENOSPC is returned; if we're lucky to get enough clusters,
which is usually the case, we start over again.
But in ocfs2_free_write_ctxt() the target page isn't unlocked, so we
will deadlock when trying to grab the target page again.
Also, -ENOMEM might be returned in ocfs2_grab_pages_for_write().
Another deadlock will happen in __do_page_mkwrite() if
ocfs2_page_mkwrite() returns non-VM_FAULT_LOCKED, and along with a
locked target page.
These two errors fail on the same path, so fix them by unlocking the
target page manually before ocfs2_free_write_ctxt().
Jan Kara helps me clear out the JBD2 part, and suggest the hint for root
cause.
Changes since v1:
1. Also put ENOMEM error case into consideration.
Link: http://lkml.kernel.org/r/1474173902-32075-1-git-send-email-zren@suse.com
Signed-off-by: Eric Ren <zren@suse.com>
Reviewed-by: He Gang <ghe@suse.com>
Acked-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Antonio reports the following crash when using fuse under memory pressure:
kernel BUG at /build/linux-a2WvEb/linux-4.4.0/mm/workingset.c:346!
invalid opcode: 0000 [#1] SMP
Modules linked in: all of them
CPU: 2 PID: 63 Comm: kswapd0 Not tainted 4.4.0-36-generic #55-Ubuntu
Hardware name: System manufacturer System Product Name/P8H67-M PRO, BIOS 3904 04/27/2013
task: ffff88040cae6040 ti: ffff880407488000 task.ti: ffff880407488000
RIP: shadow_lru_isolate+0x181/0x190
Call Trace:
__list_lru_walk_one.isra.3+0x8f/0x130
list_lru_walk_one+0x23/0x30
scan_shadow_nodes+0x34/0x50
shrink_slab.part.40+0x1ed/0x3d0
shrink_zone+0x2ca/0x2e0
kswapd+0x51e/0x990
kthread+0xd8/0xf0
ret_from_fork+0x3f/0x70
which corresponds to the following sanity check in the shadow node
tracking:
BUG_ON(node->count & RADIX_TREE_COUNT_MASK);
The workingset code tracks radix tree nodes that exclusively contain
shadow entries of evicted pages in them, and this (somewhat obscure)
line checks whether there are real pages left that would interfere with
reclaim of the radix tree node under memory pressure.
While discussing ways how fuse might sneak pages into the radix tree
past the workingset code, Miklos pointed to replace_page_cache_page(),
and indeed there is a problem there: it properly accounts for the old
page being removed - __delete_from_page_cache() does that - but then
does a raw raw radix_tree_insert(), not accounting for the replacement
page. Eventually the page count bits in node->count underflow while
leaving the node incorrectly linked to the shadow node LRU.
To address this, make sure replace_page_cache_page() uses the tracked
page insertion code, page_cache_tree_insert(). This fixes the page
accounting and makes sure page-containing nodes are properly unlinked
from the shadow node LRU again.
Also, make the sanity checks a bit less obscure by using the helpers for
checking the number of pages and shadows in a radix tree node.
Fixes: 449dd6984d ("mm: keep page cache radix tree nodes in check")
Link: http://lkml.kernel.org/r/20160919155822.29498-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Antonio SJ Musumeci <trapexit@spawn.link>
Debugged-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: <stable@vger.kernel.org> [3.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This warning:
WARNING: CPU: 0 PID: 3331 at arch/x86/entry/common.c:45 enter_from_user_mode+0x32/0x50
CPU: 0 PID: 3331 Comm: ldt_gdt_64 Not tainted 4.8.0-rc7+ #13
Call Trace:
dump_stack+0x99/0xd0
__warn+0xd1/0xf0
warn_slowpath_null+0x1d/0x20
enter_from_user_mode+0x32/0x50
error_entry+0x6d/0xc0
? general_protection+0x12/0x30
? native_load_gs_index+0xd/0x20
? do_set_thread_area+0x19c/0x1f0
SyS_set_thread_area+0x24/0x30
do_int80_syscall_32+0x7c/0x220
entry_INT80_compat+0x38/0x50
... can be reproduced by running the GS testcase of the ldt_gdt test unit in
the x86 selftests.
do_int80_syscall_32() will call enter_form_user_mode() to convert context
tracking state from user state to kernel state. The load_gs_index() call
can fail with user gsbase, gsbase will be fixed up and proceed if this
happen.
However, enter_from_user_mode() will be called again in the fixed up path
though it is context tracking kernel state currently.
This patch fixes it by just fixing up gsbase and telling lockdep that IRQs
are off once load_gs_index() failed with user gsbase.
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1475197266-3440-1-git-send-email-wanpeng.li@hotmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When sctp dumps all the ep->assocs, it needs to lock_sock first,
but now it locks sock in rcu_read_lock, and lock_sock may sleep,
which would break rcu_read_lock.
This patch is to get and hold one sock when traversing the list.
After that and get out of rcu_read_lock, lock and dump it. Then
it will traverse the list again to get the next one until all
sctp socks are dumped.
For sctp_diag_dump_one, it fixes this issue by holding asoc and
moving cb() out of rcu_read_lock in sctp_transport_lookup_process.
Fixes: 8f840e47f1 ("sctp: add the sctp_diag.c file")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long says:
====================
sctp: a bunch of fixes for prsctp polices
This patchset is to fix 2 issues for prsctp polices:
1. patch 1 and 2 fix "netperf-Throughput_Mbps -37.2% regression" issue
when overloading the CPU.
2. patch 3 fix "prsctp polices should check both sides' prsctp_capable,
instead of only local side".
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Now before using prsctp polices, sctp uses asoc->prsctp_enable to
check if prsctp is enabled. However asoc->prsctp_enable is set only
means local host support prsctp, sctp should not abandon packet if
peer host doesn't enable prsctp.
So this patch is to use asoc->peer.prsctp_capable to check if prsctp
is enabled on both side, instead of asoc->prsctp_enable, as asoc's
peer.prsctp_capable is set only when local and peer both enable prsctp.
Fixes: a6c2f79287 ("sctp: implement prsctp TTL policy")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now sctp uses chunk->prsctp_param to save the prsctp param for all the
prsctp polices, we didn't need to introduce prsctp_param to sctp_chunk.
We can just use chunk->sinfo.sinfo_timetolive for RTX and BUF polices,
and reuse msg->expires_at for TTL policy, as the prsctp polices and old
expires policy are mutual exclusive.
This patch is to remove prsctp_param from sctp_chunk, and reuse msg's
expires_at for TTL and chunk's sinfo.sinfo_timetolive for RTX and BUF
polices.
Note that sctp can't use chunk's sinfo.sinfo_timetolive for TTL policy,
as it needs a u64 variables to save the expires_at time.
This one also fixes the "netperf-Throughput_Mbps -37.2% regression"
issue.
Fixes: a6c2f79287 ("sctp: implement prsctp TTL policy")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Now pahole sctp_chunk, it has 2 memory holes:
struct sctp_chunk {
struct list_head list;
atomic_t refcnt;
/* XXX 4 bytes hole, try to pack */
...
long unsigned int prsctp_param;
int sent_count;
/* XXX 4 bytes hole, try to pack */
This patch is to move up sent_count to fill the 1st one and eliminate
the 2nd one.
It's not just another struct compaction, it also fixes the "netperf-
Throughput_Mbps -37.2% regression" issue when overloading the CPU.
Fixes: a6c2f79287 ("sctp: implement prsctp TTL policy")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While the driver is probing the adapter, an error may occur before the
netdev structure is allocated and attached to pci_dev. In this case,
not only netdev isn't available, but the tg3 private structure is also
not available as it is just math from the NULL pointer, so dereferences
must be skipped.
The following trace is seen when the error is triggered:
[1.402247] Unable to handle kernel paging request for data at address 0x00001a99
[1.402410] Faulting instruction address: 0xc0000000007e33f8
[1.402450] Oops: Kernel access of bad area, sig: 11 [#1]
[1.402481] SMP NR_CPUS=2048 NUMA PowerNV
[1.402513] Modules linked in:
[1.402545] CPU: 0 PID: 651 Comm: eehd Not tainted 4.4.0-36-generic #55-Ubuntu
[1.402591] task: c000001fe4e42a20 ti: c000001fe4e88000 task.ti: c000001fe4e88000
[1.402742] NIP: c0000000007e33f8 LR: c0000000007e3164 CTR: c000000000595ea0
[1.402787] REGS: c000001fe4e8b790 TRAP: 0300 Not tainted (4.4.0-36-generic)
[1.402832] MSR: 9000000100009033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 28000422 XER: 20000000
[1.403058] CFAR: c000000000008468 DAR: 0000000000001a99 DSISR: 42000000 SOFTE: 1
GPR00: c0000000007e3164 c000001fe4e8ba10 c0000000015c5e00 0000000000000000
GPR04: 0000000000000001 0000000000000000 0000000000000039 0000000000000299
GPR08: 0000000000000000 0000000000000001 c000001fe4e88000 0000000000000006
GPR12: 0000000000000000 c00000000fb40000 c0000000000e6558 c000003ca1bffd00
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 c000000000d52768
GPR24: c000000000d52740 0000000000000100 c000003ca1b52000 0000000000000002
GPR28: 0000000000000900 0000000000000000 c00000000152a0c0 c000003ca1b52000
[1.404226] NIP [c0000000007e33f8] tg3_io_error_detected+0x308/0x340
[1.404265] LR [c0000000007e3164] tg3_io_error_detected+0x74/0x340
This patch avoids the NULL pointer dereference by moving the access after
the netdev NULL pointer check on tg3_io_error_detected(). Also, we add a
check for netdev being NULL on tg3_io_resume() [suggested by Michael Chan].
Fixes: 0486a063b1 ("tg3: prevent ifup/ifdown during PCI error recovery")
Fixes: dfc8f37031 ("net/tg3: Release IRQs on permanent error")
Tested-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Milton Miller <miltonm@us.ibm.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull drm fixes from Dave Airlie:
"drm fixes for final 4.8.
One big regression fix for udl, along with two amdgpu fixes and two
nouveau fixes.
All seems pretty safe and useful"
* tag 'drm-fixes-for-v4.8-final' of git://people.freedesktop.org/~airlied/linux:
drm/udl: fix line iterator in damage handling
drm/radeon/si/dpm: add workaround for for Jet parts
drm/amdgpu: disable CRTCs before teardown
drm/nouveau: Revert "bus: remove cpu_coherent flag"
drm/nouveau/fifo/nv04: avoid ramht race against cookie insertion
Pull libnvdimm fixes from Dan Williams:
- Four fixes for "flush hint" support.
Flush hints are addresses advertised by the ACPI 6+ NFIT (NVDIMM
Firmware Interface Table) that when written and fenced guarantee that
writes pending in platform write buffers (outside the cpu) have been
flushed to media. They might also be used by hypervisors as a
trigger condition to flush guest-persistent memory ranges to storage.
Fix a potential data corruption issue, a broken definition of the
hint array, a wrong allocation size for the unit test implementation
of the flush hint table, and missing NULL check in an error path.
The unit test, while it did not prevent these bugs from being
merged, at least triggered occasional crashes in advance of
production usages.
- Fix handling of ACPI DSM error status results. The DSM mechanism
allows communication with platform and memory device firmware. We
correctly parse known errors, but were silently ignoring others.
Fix it to consistently fail any command with a non-zero status return
that we otherwise do not interpret / handle.
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm, region: fix flush hint table thinko
nfit: fail DSMs that return non-zero status by default
libnvdimm: fix devm_nvdimm_memremap() error path
tools/testing/nvdimm: fix allocation range for mock flush hint tables
nvdimm: fix PHYS_PFN/PFN_PHYS mixup
The paging_init() function contains code which detects that highmem is
in use but unsupported due to dcache aliasing. However this code was
ineffective because it was being run before the caches are probed,
meaning that cpu_has_dc_aliases would always evaluate to false (unless a
platform overrides it to a compile-time constant) and the detection of
the unsupported case is never triggered. The kernel would then go on to
attempt to use highmem & either hit coherency issues or trigger the
BUG_ON in flush_kernel_dcache_page().
Fix this by running paging_init() later than cpu_cache_init(), such that
the cpu_has_dc_aliases macro will evaluate correctly & the unsupported
highmem case will be detected successfully.
This then leads to a formerly hidden issue in that
mem_init_free_highmem() will attempt to free all highmem pages, even
though we're avoiding use of them & don't have valid page structs for
them. This leads to an invalid pointer dereference & a TLB exception.
Avoid this by skipping the loop in mem_init_free_highmem() if
cpu_has_dc_aliases evaluates true.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Rabin Vincent <rabinv@axis.com>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Jaedon Shin <jaedon.shin@gmail.com>
Cc: Toshi Kani <toshi.kani@hpe.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Jonas Gorski <jogo@openwrt.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14184/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Malta boards used with CPU emulators feature a switch to disable use of
an IOCU. Software has to check this switch & ignore any present IOCU if
the switch is closed. The read used to do this was unsafe for 64 bit
kernels, as it simply casted the address 0xbf403000 to a pointer &
dereferenced it. Whilst in a 32 bit kernel this would access kseg1, in a
64 bit kernel this attempts to access xuseg & results in an address
error exception.
Fix by accessing a correctly formed ckseg1 address generated using the
CKSEG1ADDR macro.
Whilst modifying this code, define the name of the register and the bit
we care about within it, which indicates whether PCI DMA is routed to
the IOCU or straight to DRAM. The code previously checked that bit 0 was
also set, but the least significant 7 bits of the CONFIG_GEN0 register
contain the value of the MReqInfo signal provided to the IOCU OCP bus,
so singling out bit 0 makes little sense & that part of the check is
dropped.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: b6d92b4a6b ("MIPS: Add option to disable software I/O coherency.")
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14187/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When the kernel is built for microMIPS, branches targets need to be
known to be microMIPS code in order to result in bit 0 of the PC being
set. The branch target in the BUILD_ROLLBACK_PROLOGUE macro was simply
the end of the macro, which may be pointing at padding rather than at
code. This results in recent enough GNU linkers complaining like so:
mips-img-linux-gnu-ld: arch/mips/built-in.o: .text+0x3e3c: Unsupported branch between ISA modes.
mips-img-linux-gnu-ld: final link failed: Bad value
Makefile:936: recipe for target 'vmlinux' failed
make: *** [vmlinux] Error 1
Fix this by changing the branch target to be the start of the
appropriate handler, skipping over any padding.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14019/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
On current P-series cores from Imagination the FTLB can be enabled or
disabled via a bit in the Config6 register, and an execution hazard is
created by changing the value of bit. The ftlb_disable function already
cleared that hazard but that does no good for other callers. Clear the
hazard in the set_ftlb_enable function that creates it, and only for the
cores where it applies.
This has the effect of reverting c982c6d6c4 ("MIPS: cpu-probe: Remove
cp0 hazard barrier when enabling the FTLB") which was incorrect.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: c982c6d6c4 ("MIPS: cpu-probe: Remove cp0 hazard barrier when enabling the FTLB")
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14023/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
On some cores (proAptiv, P5600) we make use of the sizes of the TLBs
to determine the desired FTLB:VTLB write ratio. However set_ftlb_enable
& thus calculate_ftlb_probability is called before decode_config4. This
results in us calculating a probability based on zero sizes, and we end
up setting FTLBP=3 for a 3:1 FTLB:VTLB write ratio in all cases. This
will make abysmal use of the available FTLB resources in the affected
cores.
Fix this by configuring the FTLB probability after having decoded
config4. However we do need to have enabled the FTLB before that point
such that fields in config4 actually reflect that an FTLB is present. So
set_ftlb_enable is now called twice, with flags indicating that it
should configure the write probability only the second time.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: cf0a8aa022 ("MIPS: cpu-probe: Set the FTLB probability bit on supported cores")
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14022/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The FTLBP field in Config7 for the I6400 is intended as chicken bits for
debugging rather than as a field that software actually makes use of.
For best performance, FTLBP should be left at its default value of 0
with all TLB writes hitting the FTLB by default.
Additionally, since set_ftlb_enable is called from decode_configs before
decode_config4 which determines the size of the TLBs, this was
previously always setting FTLBP=3 for a 3:1 FTLB:VTLB write ratio which
makes abysmal use of the available FTLB resources.
This effectively reverts b0c4e1b79d8a ("MIPS: Set up FTLB probability
for I6400").
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: b0c4e1b79d8a ("MIPS: Set up FTLB probability for I6400")
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14021/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When expanding the la or dla pseudo-instruction in a delay slot the GNU
assembler will complain should the pseudo-instruction expand to multiple
actual instructions, since only the first of them will be in the delay
slot leading to the pseudo-instruction being only partially executed if
the branch is taken. Use of PTR_LA in the dec int-handler.S leads to
such warnings:
arch/mips/dec/int-handler.S: Assembler messages:
arch/mips/dec/int-handler.S:149: Warning: macro instruction expanded into multiple instructions in a branch delay slot
arch/mips/dec/int-handler.S:198: Warning: macro instruction expanded into multiple instructions in a branch delay slot
Avoid this by open coding the PTR_LA macros.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Generic kernel code implements a weak version of set_orig_insn that
moves cached 'insn' from arch_uprobe to the original code location when
the trap is removed.
MIPS variant used arch_uprobe->orig_inst which was never initialised
properly, so this code only inserted a nop instead of the original
instruction. With that change orig_inst can also be safely removed.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Fixes: 40e084a506 ('MIPS: Add uprobes support.')
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14299/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Since commit 6ce0d20016 ("ARM: dma: Use dma_pfn_offset for dma address translation"),
dma_to_pfn() already returns the PFN with the physical memory start offset
so we don't need to add it again.
This fixes USB mass storage lock-up problem on systems that can't do DMA
over the entire physical memory range (e.g.) Keystone 2 systems with 4GB RAM
can only do DMA over the first 2GB. [K2E-EVM].
What happens there is that without this patch SCSI layer sets a wrong
bounce buffer limit in scsi_calculate_bounce_limit() for the USB mass
storage device. dma_max_pfn() evaluates to 0x8fffff and bounce_limit
is set to 0x8fffff000 whereas maximum DMA'ble physical memory on Keystone 2
is 0x87fffffff. This results in non DMA'ble pages being given to the
USB controller and hence the lock-up.
NOTE: in the above case, USB-SCSI-device's dma_pfn_offset was showing as 0.
This should have really been 0x780000 as on K2e, LOWMEM_START is 0x80000000
and HIGHMEM_START is 0x800000000. DMA zone is 2GB so dma_max_pfn should be
0x87ffff. The incorrect dma_pfn_offset for the USB storage device is because
USB devices are not correctly inheriting the dma_pfn_offset from the
USB host controller. This will be fixed by a separate patch.
Fixes: 6ce0d20016 ("ARM: dma: Use dma_pfn_offset for dma address translation")
Cc: stable@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Reported-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Whilst MPIDR values themselves are less than 32 bits, it is still
perfectly valid for a DT to have #address-cells > 1 in the CPUs node,
resulting in the "reg" property having leading zero cell(s). In that
situation, the big-endian nature of the data conspires with the current
behaviour of only reading the first cell to cause the kernel to think
all CPUs have ID 0, and become resoundingly unhappy as a consequence.
Take the full property length into account when parsing CPUs so as to
be correct under any circumstances.
Cc: Russell King <linux@armlinux.org.uk>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Need to provide a dummy smp_fill_in_cpu_possible_map.
Fixes: 9b2f753ec2 ("sparc64: Fix cpu_possible_mask if nr_cpus is set")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge fixes from Andrew Morton:
"4 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mem-hotplug: use nodes that contain memory as mask in new_node_page()
scripts/recordmcount.c: account for .softirqentry.text
dma-mapping.h: preserve unmap info for CONFIG_DMA_API_DEBUG
mm,ksm: fix endless looping in allocating memory when ksm enable
I hit the following hung task when runing a OOM LTP test case with 4.1
kernel.
Call trace:
[<ffffffc000086a88>] __switch_to+0x74/0x8c
[<ffffffc000a1bae0>] __schedule+0x23c/0x7bc
[<ffffffc000a1c09c>] schedule+0x3c/0x94
[<ffffffc000a1eb84>] rwsem_down_write_failed+0x214/0x350
[<ffffffc000a1e32c>] down_write+0x64/0x80
[<ffffffc00021f794>] __ksm_exit+0x90/0x19c
[<ffffffc0000be650>] mmput+0x118/0x11c
[<ffffffc0000c3ec4>] do_exit+0x2dc/0xa74
[<ffffffc0000c46f8>] do_group_exit+0x4c/0xe4
[<ffffffc0000d0f34>] get_signal+0x444/0x5e0
[<ffffffc000089fcc>] do_signal+0x1d8/0x450
[<ffffffc00008a35c>] do_notify_resume+0x70/0x78
The oom victim cannot terminate because it needs to take mmap_sem for
write while the lock is held by ksmd for read which loops in the page
allocator
ksm_do_scan
scan_get_next_rmap_item
down_read
get_next_rmap_item
alloc_rmap_item #ksmd will loop permanently.
There is no way forward because the oom victim cannot release any memory
in 4.1 based kernel. Since 4.6 we have the oom reaper which would solve
this problem because it would release the memory asynchronously.
Nevertheless we can relax alloc_rmap_item requirements and use
__GFP_NORETRY because the allocation failure is acceptable as ksm_do_scan
would just retry later after the lock got dropped.
Such a patch would be also easy to backport to older stable kernels which
do not have oom_reaper.
While we are at it add GFP_NOWARN so the admin doesn't have to be alarmed
by the allocation failure.
Link: http://lkml.kernel.org/r/1474165570-44398-1-git-send-email-zhongjiang@huawei.com
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Suggested-by: Hugh Dickins <hughd@google.com>
Suggested-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull late MTD fixes from Brian Norris:
"Another round of MTD fixes for v4.8
My apologies for sending this so late. I've been fairly absent as a
maintainer this cycle, but I did queue these up weeks ago. In the
meantime, Richard was able to handle some other fixes (thanks!) but
didn't pick these up.
On the bright side, these are very simple changes that should carry
little risk.
Summary:
- Davinci NAND: fix a long-standing bug in how we clear/prep 4-bit ECC
- OMAP NAND: an error-handling fix that made it into v4.8-rc1 caused
error-handling cases in other configurations/code-paths; this fixes
the fix"
* tag 'for-linus-20160928' of git://git.infradead.org/linux-mtd:
mtd: nand: davinci: Reinitialize the HW ECC engine in 4bit hwctl
mtd: nand: omap2: Don't call dma_release_channel() if dma_request_chan() failed
I will be starting employment at Versity next week and would like to update
my MAINTAINERS e-mail to reflect that change. My versity e-mail is already
activated so I shouldn't get any bounces on the new one. My ability to help
with Ocfs2 kernel maintenance won't change as a result of the new job.
Signed-off-by: Mark Fasheh <mfasheh@versity.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently, irq stack bootmem is allocated for all possible cpus
before nr_cpus value changes the list of possible cpus. As a result,
there is unnecessary wastage of bootmemory.
Move the irq stack bootmem allocation so that it happens after
possible cpu list is modified based on nr_cpus value.
Signed-off-by: Atish Patra <atish.patra@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Vijay Kumar <vijay.ac.kumar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If kernel boot parameter nr_cpus is set, it should define the number
of CPUs that can ever be available in the system i.e.
cpu_possible_mask. setup_nr_cpu_ids() overrides the nr_cpu_ids based
on the cpu_possible_mask during kernel initialization. If
cpu_possible_mask is not set based on the nr_cpus value, earlier part
of the kernel would be initialized using nr_cpus value leading to a
kernel crash.
Set cpu_possible_mask based on nr_cpus value. Thus setup_nr_cpu_ids()
becomes redundant and does not corrupt nr_cpu_ids value.
Signed-off-by: Atish Patra <atish.patra@oracle.com>
Reviewed-by: Bob Picco <bob.picco@oracle.com>
Reviewed-by: Vijay Kumar <vijay.ac.kumar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit af1b1a9b36 ("sparc64 mm: Fix base TSB sizing when hugetlb
pages are used") addressed the difference between hugetlb and THP
pages when computing TSB sizes. The following additional issues
were also discovered while working with the code.
In order to save memory, THP makes use of a huge zero page. This huge
zero page does not count against a task's RSS, but it does consume TSB
entries. This is similar to hugetlb pages. Therefore, count huge
zero page entries in hugetlb_pte_count.
Accounting of THP pages is done in the routine set_pmd_at().
Unfortunately, this does not catch the case where a THP page is split.
To handle this case, decrement the count in pmdp_invalidate().
pmdp_invalidate is only called when splitting a THP. However, 'sanity
checks' are added in case it is ever called for other purposes.
A more general issue exists with HPAGE_SIZE accounting.
hugetlb_pte_count tracks the number of HPAGE_SIZE (8M) pages. This
value is used to size the TSB for HPAGE_SIZE pages. However,
each HPAGE_SIZE page consists of two REAL_HPAGE_SIZE (4M) pages.
The TSB contains an entry for each REAL_HPAGE_SIZE page. Therefore,
the number of REAL_HPAGE_SIZE pages should be used to size the huge
page TSB. A new compile time constant REAL_HPAGE_PER_HPAGE is used
to multiply hugetlb_pte_count before sizing the TSB.
Changes from V1
- Fixed build issue if hugetlb or THP not configured
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To fix:
WARNING: vmlinux.o(.text.unlikely+0x580): Section mismatch in
reference from the function find_numa_latencies_for_group() to the
function .init.text:find_mlgroup()
The function find_numa_latencies_for_group() references the
function __init find_mlgroup(). This is often because
find_numa_latencies_for_group lacks a __init annotation or the
annotation of find_mlgroup is wrong.
It turns out find_numa_latencies_for_group is only called from:
static int __init numa_parse_mdesc(void)
and hence we can tag find_numa_latencies_for_group with __init.
In doing so we see that find_best_numa_node_for_mlgroup is only
called from within __init and hence can also be marked with __init.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Nitin Gupta <nitin.m.gupta@oracle.com>
Cc: Chris Hyser <chris.hyser@oracle.com>
Cc: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Cc: sparclinux@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The udl damage handler is supposed to render 'height' lines, but its
iterator has an obvious typo that makes it miss most lines if the
rectangle does not cover 0/0.
Fix the damage handler to correctly render all lines.
This is a fallout from:
commit e375882406
Author: Noralf Trønnes <noralf@tronnes.org>
Date: Thu Apr 28 17:18:37 2016 +0200
drm/udl: Use drm_fb_helper deferred_io support
Tested-by: poma <poma@gmail.com>
Cc: stable@vger.kernel.org # 4.7+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
two amd fixes.
* 'drm-fixes-4.8' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon/si/dpm: add workaround for for Jet parts
drm/amdgpu: disable CRTCs before teardown
Pull cgroup fixes from Tejun Heo:
"Three late fixes for cgroup: Two cpuset ones, one trivial and the
other pretty obscure, and a cgroup core fix for a bug which impacts
cgroup v2 namespace users"
* 'for-4.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: fix invalid controller enable rejections with cgroup namespace
cpuset: fix non static symbol warning
cpuset: handle race between CPU hotplug and cpuset_hotplug_work
Some code called by drm_crtc_force_disable_all() wants to wait for all
fences, so only do fence teardown after CRTCs are disabled.
Fixes: 84b89bdced ("drm/amdgpu: Turn off CRTCs on driver unload")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Yotam Gigi says:
====================
Fix tc-ife bugs
This patch-set contains two bugfixes in the tc-ife action, one fixing some
random behaviour in encode side, and one fixing the decode side packet
parsing logic.
v2->v3
- Fix the encode side instead of the decode side
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
On ife encode side, the action stores the different tlvs inside the ife
header, where each tlv length field should refer to the length of the
whole tlv (without additional padding) and not just the data length.
On ife decode side, the action iterates over the tlvs in the ife header
and parses them one by one, where in each iteration the current pointer is
advanced according to the tlv size.
Before, the encoding encoded only the data length inside the tlv, which led
to false parsing of ife the header. In addition, due to the fact that the
loop counter was unsigned, it could lead to infinite parsing loop.
This fix changes the loop counter to be signed and fixes the encoding to
take into account the tlv type and size.
Fixes: 28a10c426e ("net sched: fix encoding to use real length")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On ife encode side, external mac header is copied from the original packet
and may be overridden if the user requests. Before, the mac header copy
was done from memory region that might not be accessible anymore, as
skb_cow_head might free it and copy the packet. This led to random values
in the external mac header once the values were not set by user.
This fix takes the internal mac header from the packet, after the call to
skb_cow_head.
Fixes: ef6980b6be ("net sched: introduce IFE action")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a pending socket is marked as rejected, we will decrease the
sk_ack_backlog twice. So don't decrement it for rejected sockets
in vsock_pending_work().
Testing of the rejected socket path was done through code
modifications.
Reported-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Jorgen Hansen <jhansen@vmware.com>
Reviewed-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Aditya Sarwade <asarwade@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 62469c7600 ("net: ethernet: bcmgenet: use phydev
from struct net_device") because it causes GENETv1/2/3 adapters to
expose the following behavior after an ifconfig down/up sequence:
PING fainelli-linux (10.112.156.244): 56 data bytes
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.352 ms
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.472 ms (DUP!)
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.496 ms (DUP!)
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.517 ms (DUP!)
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.536 ms (DUP!)
64 bytes from 10.112.156.244: seq=1 ttl=61 time=1.557 ms (DUP!)
64 bytes from 10.112.156.244: seq=1 ttl=61 time=752.448 ms (DUP!)
This was previously fixed by commit 5dbebbb44a ("net: bcmgenet:
Software reset EPHY after power on") but the commit we are reverting was
essentially making this previous commit void, here is why.
Without commit 62469c7600 we would have the following scenario after
an ifconfig down then up sequence:
- bcmgenet_open() calls bcmgenet_power_up() to make sure the PHY is
initialized *before* we get to initialize the UniMAC, this is
critical to ensure the PHY is in a correct state, priv->phydev is
valid, this code executes fine
- second time from bcmgenet_mii_probe(), through the normal
phy_init_hw() call (which arguably could be optimized out)
Everything is fine in that case. With commit 62469c7600, we would have
the following scenario to happen after an ifconfig down then up
sequence:
- bcmgenet_close() calls phy_disonnect() which makes dev->phydev become
NULL
- when bcmgenet_open() executes again and calls bcmgenet_mii_reset() from
bcmgenet_power_up() to initialize the internal PHY, the NULL check
becomes true, so we do not reset the PHY, yet we keep going on and
initialize the UniMAC, causing MAC activity to occur
- we call bcmgenet_mii_reset() from bcmgenet_mii_probe(), but this is
too late, the PHY is botched, and causes the above bogus pings/packets
transmission/reception to occur
Reported-by: Jaedon Shin <jaedon.shin@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Nelson says:
====================
net: fec: updates to align IP header
This patch series is the outcome of investigation into very high
numbers of alignment faults on kernel 4.1.33 from the linux-fslc
tree:
https://github.com/freescale/linux-fslc/tree/4.1-1.0.x-imx
The first two patches remove support for the receive accelerator (RACC) from
the i.MX25 and i.MX27 SoCs which don't support the function.
The third patch enables hardware alignment of the ethernet packet payload
(and especially the IP header) to prevent alignment faults in the IP stack.
Testing on i.MX6UL on the 4.1.33 kernel showed that this patch removed
on the order of 70k alignment faults during a 100MiB transfer using
wget.
Testing on an i.MX6Q (SABRE Lite) board on net-next (4.8.0-rc7) showed
a much more modest improvement from 10's of faults, and it's not clear
why that's the case.
====================
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The FEC receive accelerator (RACC) supports shifting the data payload of
received packets by 16-bits, which aligns the payload (IP header) on a
4-byte boundary, which is, if not required, at least strongly suggested
by the Linux networking layer.
Without this patch, a huge number of alignment faults will be taken by the
IP stack, as seen in /proc/cpu/alignment:
~/$ cat /proc/cpu/alignment
User: 0
System: 72645 (inet_gro_receive+0x104/0x27c)
Skipped: 0
Half: 0
Word: 0
DWord: 0
Multi: 72645
User faults: 3 (fixup+warn)
This patch was suggested by Andrew Lunn in this message to linux-netdev:
http://marc.info/?l=linux-arm-kernel&m=147465452108384&w=2
and adapted from a patch by Russell King from 2014:
http://git.arm.linux.org.uk/cgit/linux-arm.git/commit/?id=70d8a8a
Signed-off-by: Eric Nelson <eric@nelint.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current implementation of joydev's input_device_id table recognizes only
devices with ABS_X, ABS_WHEEL or ABS_THROTTLE axes as joysticks.
There are joystick devices that do not have those axes, for example TRC
Rudder device. The device in question has ABS_Z, ABS_RX and ABS_RY axes
causing it not being detected as joystick.
This patch adds ABS_Z to the input_device_id list allowing devices with
ABS_Z axis to be detected correctly.
Signed-off-by: Ville Ranki <ville.ranki@iki.fi>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This patch avoids that the following memory leak is triggered if
use_blk_mq is disabled after a SCSI host has been allocated by the
ib_srp driver and before the same SCSI host is freed:
unreferenced object 0xffff8803a168c568 (size 256):
backtrace:
[<ffffffff81620c95>] kmemleak_alloc+0x45/0xa0
[<ffffffff811bb104>] __kmalloc_node+0x1e4/0x400
[<ffffffff81309fe4>] blk_mq_alloc_tag_set+0xb4/0x230
[<ffffffff814731b7>] scsi_mq_setup_tags+0xc7/0xd0
[<ffffffff81469c26>] scsi_add_host_with_dma+0x216/0x2d0
[<ffffffffa064bef5>] srp_create_target+0xe55/0x13d0 [ib_srp]
[<ffffffff8143ce23>] dev_attr_store+0x13/0x20
[<ffffffff8125f030>] sysfs_kf_write+0x40/0x50
[<ffffffff8125e397>] kernfs_fop_write+0x137/0x1c0
[<ffffffff811d8c13>] __vfs_write+0x23/0x140
[<ffffffff811d92e0>] vfs_write+0xb0/0x190
[<ffffffff811da5b4>] SyS_write+0x44/0xa0
[<ffffffff8162c8a5>] entry_SYSCALL_64_fastpath+0x18/0xa8
Fixes: 9aa9cc4221 ("scsi: remove the disable_blk_mq host flag")
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull tracefs fixes from Steven Rostedt:
"Al Viro has been looking at the tracefs code, and has pointed out some
issues. This contains one fix by me and one by Al. I'm sure that
he'll come up with more but for now I tested these patches and they
don't appear to have any negative impact on tracing"
* tag 'trace-v4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
fix memory leaks in tracing_buffers_splice_read()
tracing: Move mutex to protect against resetting of seq data
When building XFS with -Werror, it now fails with:
include/linux/pagemap.h: In function 'fault_in_multipages_readable':
include/linux/pagemap.h:602:16: error: variable 'c' set but not used [-Werror=unused-but-set-variable]
volatile char c;
^
This is a regression caused by commit e23d4159b1 ("fix
fault_in_multipages_...() on architectures with no-op access_ok()").
Fix it by re-adding the "(void)c" trick taht was previously used to make
the compiler think the variable is used.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The NUMA balancing logic uses an arch-specific PROT_NONE page table flag
defined by pte_protnone() or pmd_protnone() to mark PTEs or huge page
PMDs respectively as requiring balancing upon a subsequent page fault.
User-defined PROT_NONE memory regions which also have this flag set will
not normally invoke the NUMA balancing code as do_page_fault() will send
a segfault to the process before handle_mm_fault() is even called.
However if access_remote_vm() is invoked to access a PROT_NONE region of
memory, handle_mm_fault() is called via faultin_page() and
__get_user_pages() without any access checks being performed, meaning
the NUMA balancing logic is incorrectly invoked on a non-NUMA memory
region.
A simple means of triggering this problem is to access PROT_NONE mmap'd
memory using /proc/self/mem which reliably results in the NUMA handling
functions being invoked when CONFIG_NUMA_BALANCING is set.
This issue was reported in bugzilla (issue 99101) which includes some
simple repro code.
There are BUG_ON() checks in do_numa_page() and do_huge_pmd_numa_page()
added at commit c0e7cad to avoid accidentally provoking strange
behaviour by attempting to apply NUMA balancing to pages that are in
fact PROT_NONE. The BUG_ON()'s are consistently triggered by the repro.
This patch moves the PROT_NONE check into mm/memory.c rather than
invoking BUG_ON() as faulting in these pages via faultin_page() is a
valid reason for reaching the NUMA check with the PROT_NONE page table
flag set and is therefore not always a bug.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=99101
Reported-by: Trevor Saunders <tbsaunde@tbsaunde.org>
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull one more powerpc fix from Michael Ellerman:
"powernv/pci: Fix m64 checks for SR-IOV and window alignment from
Russell Currey"
* tag 'powerpc-4.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv/pci: Fix m64 checks for SR-IOV and window alignment
The fixes to the radix tree test suite show that the multi-order case is
broken. The basic reason is that the radix tree code uses tagged
pointers with the "internal" bit in the low bits, and calculating the
pointer indices was supposed to mask off those bits. But gcc will
notice that we then use the index to re-create the pointer, and will
avoid doing the arithmetic and use the tagged pointer directly.
This cleans the code up, using the existing is_sibling_entry() helper to
validate the sibling pointer range (instead of open-coding it), and
using entry_to_node() to mask off the low tag bit from the pointer. And
once you do that, you might as well just use the now cleaned-up pointer
directly.
[ Side note: the multi-order code isn't actually ever used in the kernel
right now, and the only reason I didn't just delete all that code is
that Kirill Shutemov piped up and said:
"Well, my ext4-with-huge-pages patchset[1] uses multi-order entries.
It also converts shmem-with-huge-pages and hugetlb to them.
I'm okay with converting it to other mechanism, but I need
something. (I looked into Konstantin's RFC patchset[2]. It looks
okay, but I don't feel myself qualified to review it as I don't
know much about radix-tree internals.)"
[1] http://lkml.kernel.org/r/20160915115523.29737-1-kirill.shutemov@linux.intel.com
[2] http://lkml.kernel.org/r/147230727479.9957.1087787722571077339.stgit@zurg ]
Reported-by: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Cedric Blancher <cedric.blancher@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we replace a multiorder entry, check that all indices reflect the
new value.
Also, compile the test suite with -O2, which shows other problems with
the code due to some dodgy pointer operations in the radix tree code.
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The iter->seq can be reset outside the protection of the mutex. So can
reading of user data. Move the mutex up to the beginning of the function.
Fixes: d7350c3f45 ("tracing/core: make the read callbacks reentrants")
Cc: stable@vger.kernel.org # 2.6.30+
Reported-by: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Commit 432c6bacbd ("MIPS: Use per-mm page to execute branch delay slot
instructions") accidentally removed use of the MIPS_FPU_EMU_INC_STATS
macro from do_dsemulret, leading to the ds_emul file in debugfs always
returning zero even though we perform delay slot emulations.
Fix this by re-adding the use of the MIPS_FPU_EMU_INC_STATS macro.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: 432c6bacbd ("MIPS: Use per-mm page to execute branch delay slot instructions")
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14301/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This patch fixes the possibility of a deadlock when bringing up
secondary CPUs.
The deadlock occurs because the set_cpu_online() is called before
synchronise_count_slave(). This can cause a deadlock if the boot CPU,
having scheduled another thread, attempts to send an IPI to the
secondary CPU, which it sees has been marked online. The secondary is
blocked in synchronise_count_slave() waiting for the boot CPU to enter
synchronise_count_master(), but the boot cpu is blocked in
smp_call_function_many() waiting for the secondary to respond to it's
IPI request.
Fix this by marking the CPU online in cpu_callin_map and synchronising
counters before declaring the CPU online and calculating the maps for
IPIs.
Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Reported-by: Justin Chen <justinpopo6@gmail.com>
Tested-by: Justin Chen <justinpopo6@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: stable@vger.kernel.org # v4.1+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14302/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Pull perf fixes from Thomas Gleixner:
"Three fixlets for perf:
- add a missing NULL pointer check in the intel BTS driver
- make BTS an exclusive PMU because BTS can only handle one event at
a time
- ensure that exclusive events are limited to one PMU so that several
exclusive events can be scheduled on different PMU instances"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Limit matching exclusive events to one PMU
perf/x86/intel/bts: Make it an exclusive PMU
perf/x86/intel/bts: Make sure debug store is valid
Pull locking fixes from Thomas Gleixner:
"Two smallish fixes:
- use the proper asm constraint in the Super-H atomic_fetch_ops
- a trivial typo fix in the Kconfig help text"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/hung_task: Fix typo in CONFIG_DETECT_HUNG_TASK help text
locking/atomic, arch/sh: Fix ATOMIC_FETCH_OP()
Pull EFI fixes from Thomas Gleixner:
"Two fixes for EFI/PAT:
- a 32bit overflow bug in the PAT code which was unearthed by the
large EFI mappings
- prevent a boot hang on large systems when EFI mixed mode is enabled
but not used"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Only map RAM into EFI page tables if in mixed-mode
x86/mm/pat: Prevent hang during boot when mapping pages
Pull irq fixes from Thomas Gleixner:
"Three fixes for irq core and irq chip drivers:
- Do not set the irq type if type is NONE. Fixes a boot regression
on various SoCs
- Use the proper cpu for setting up the GIC target list. Discovered
by the cpumask debugging code.
- A rather large fix for the MIPS-GIC so per cpu local interrupts
work again. This was discovered late because the code falls back
to slower timers which use normal device interrupts"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mips-gic: Fix local interrupts
irqchip/gicv3: Silence noisy DEBUG_PER_CPU_MAPS warning
genirq: Skip chained interrupt trigger setup if type is IRQ_TYPE_NONE
The definition of the flush hint table as:
void __iomem *flush_wpq[0][0];
...passed the unit test, but is broken as flush_wpq[0][1] and
flush_wpq[1][0] refer to the same entry. Fix this to use a helper that
calculates a slot in the table based on the geometry of flush hints in
the region. This is important to get right since virtualization
solutions use this mechanism to trigger hypervisor flushes to platform
persistence.
Reported-by: Dave Jiang <dave.jiang@intel.com>
Tested-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Merge VM fixes from High Dickins:
"I get the impression that Andrew is away or busy at the moment, so I'm
going to send you three independent uncontroversial little mm fixes
directly - though none is strictly a 4.8 regression fix.
- shmem: fix tmpfs to handle the huge= option properly from Toshi
Kani is a one-liner to fix a major embarrassment in 4.8's hugepages
on tmpfs feature: although Hillf pointed it out in June, somehow
both Kirill and I repeatedly dropped the ball on this one. You
might wonder if the feature got tested at all with that bug in:
yes, it did, but for wider testing coverage, Kirill and I had each
relied too much on an override which bypasses that condition.
- huge tmpfs: fix Committed_AS leak just a run-of-the-mill accounting
fix in the same feature.
- mm: delete unnecessary and unsafe init_tlb_ubc() is an unrelated
fix to 4.3's TLB flush batching in reclaim: the bug would be rare,
and none of us will be shamed if this one misses 4.8; but it got
such a quick ack from Mel today that I'm inclined to offer it along
with the first two"
* emailed patches from Hugh Dickins <hughd@google.com>:
mm: delete unnecessary and unsafe init_tlb_ubc()
huge tmpfs: fix Committed_AS leak
shmem: fix tmpfs to handle the huge= option properly
init_tlb_ubc() looked unnecessary to me: tlb_ubc is statically
initialized with zeroes in the init_task, and copied from parent to
child while it is quiescent in arch_dup_task_struct(); so I went to
delete it.
But inserted temporary debug WARN_ONs in place of init_tlb_ubc() to
check that it was always empty at that point, and found them firing:
because memcg reclaim can recurse into global reclaim (when allocating
biosets for swapout in my case), and arrive back at the init_tlb_ubc()
in shrink_node_memcg().
Resetting tlb_ubc.flush_required at that point is wrong: if the upper
level needs a deferred TLB flush, but the lower level turns out not to,
we miss a TLB flush. But fortunately, that's the only part of the
protocol that does not nest: with the initialization removed, cpumask
collects bits from upper and lower levels, and flushes TLB when needed.
Fixes: 72b252aed5 ("mm: send one IPI per CPU to TLB flush all entries after unmapping pages")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: stable@vger.kernel.org # 4.3+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Under swapping load on huge tmpfs, /proc/meminfo's Committed_AS grows
bigger and bigger: just a cosmetic issue for most users, but disabling
for those who run without overcommit (/proc/sys/vm/overcommit_memory 2).
shmem_uncharge() was forgetting to unaccount __vm_enough_memory's
charge, and shmem_charge() was forgetting it on the filesystem-full
error path.
Fixes: 800d8c63b2 ("shmem: add huge pages support")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
shmem_get_unmapped_area() checks SHMEM_SB(sb)->huge incorrectly, which
leads to a reversed effect of "huge=" mount option.
Fix the check in shmem_get_unmapped_area().
Note, the default value of SHMEM_SB(sb)->huge remains as
SHMEM_HUGE_NEVER. User will need to specify "huge=" option to enable
huge page mappings.
Reported-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Similar to commit 3be07244b7 ("ip6_gre: fix flowi6_proto value in
xmit path"), set flowi6_proto to IPPROTO_GRE for output route lookup.
Up until now, ip6gre_xmit_other() has set flowi6_proto to a bogus value.
This affected output route lookup for packets sent on an ip6gretap device
in cases where routing was dependent on the value of flowi6_proto.
Since the correct proto is already set in the tunnel flowi6 template via
commit 252f3f5a11 ("ip6_gre: Set flowi6_proto as IPPROTO_GRE in xmit
path."), simply delete the line setting the incorrect flowi6_proto value.
Suggested-by: Jiri Benc <jbenc@redhat.com>
Fixes: c12b395a46 ("gre: Support GRE over IPv6")
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: Lance Richardson <lrichard@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull i2c fixes from Wolfram Sang:
"Three driver bugfixes: fixing uninitialized memory pointers (eg20t),
pm/clock imbalance (qup), and a wrongly set cached variable (pc954x)"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: qup: skip qup_i2c_suspend if the device is already runtime suspended
i2c: mux: pca954x: retry updating the mux selection on failure
i2c-eg20t: fix race between i2c init and interrupt enable
Pull input updates from Dmitry Torokhov:
"Just a fix up for the firmware handling to the Silead driver (which is
a new driver in this release)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: silead_gsl1680 - use "silead/" prefix for firmware loading
Input: silead_gsl1680 - document firmware-name, fix implementation
Pull block fixes from Jens Axboe:
"Three fixes, two regressions and one that poses a problem in blk-mq
with the new nvmef code"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq: skip unmapped queues in blk_mq_alloc_request_hctx
nvme-rdma: only clear queue flags after successful connect
blk-throttle: Extend slice if throttle group is not empty
On the v2 hierarchy, "cgroup.subtree_control" rejects controller
enables if the cgroup has processes in it. The enforcement of this
logic assumes that the cgroup wouldn't have any css_sets associated
with it if there are no tasks in the cgroup, which is no longer true
since a79a908fd2 ("cgroup: introduce cgroup namespaces").
When a cgroup namespace is created, it pins the css_set of the
creating task to use it as the root css_set of the namespace. This
extra reference stays as long as the namespace is around and makes
"cgroup.subtree_control" think that the namespace root cgroup is not
empty even when it is and thus reject controller enables.
Fix it by making cgroup_subtree_control() walk and test emptiness of
each css_set instead of testing whether the list_head is empty.
While at it, update the comment of cgroup_task_count() to indicate
that the returned value may be higher than the number of tasks, which
has always been true due to temporary references and doesn't break
anything.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Evgeny Vereshchagin <evvers@ya.ru>
Cc: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Cc: Aditya Kali <adityakali@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: stable@vger.kernel.org # v4.6+
Fixes: a79a908fd2 ("cgroup: introduce cgroup namespaces")
Link: https://github.com/systemd/systemd/pull/3589#issuecomment-249089541
Pull btrfs fixes from Chris Mason:
"Josef fixed a problem when quotas are enabled with his latest ENOSPC
rework, and Jeff added more checks into the subvol ioctls to avoid
tripping up lookup_one_len"
* 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: ensure that file descriptor used with subvol ioctls is a dir
Btrfs: handle quota reserve failure properly
Pull regmap fix from Mark Brown:
"A fix for an issue with double locking that was introduced earlier
this release. I'd missed in review that we were already in a locked
region when trying to drop part of the cache"
* tag 'regmap-fix-v4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: fix deadlock on _regmap_raw_write() error path
Pull crypto fixes from Herbert Xu:
"This fixes a regression in RSA that was only half-fixed earlier in the
cycle. It also fixes an older regression that breaks the keyring
subsystem"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: rsa-pkcs1pad - Handle leading zero for decryption
KEYS: Fix skcipher IV clobbering
Pull arm64 fixes from Catalin Marinas:
"A couple of last-minute arm64 fixes for 4.8:
- Fix secondary CPU to NUMA node assignment
- Fix kgdb breakpoint insertion in read-only text sections (when
CONFIG_DEBUG_RODATA or CONFIG_DEBUG_SET_MODULE_RONX are enabled)"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kgdb: handle read-only text / modules
arm64: Call numa_store_cpu_info() earlier.
Pull MTD fixes from Richard Weinberger:
"NAND Fixes for 4.8-rc8.
This contains fixes for bugs which got introduced in -rc1. Usually
Brian takes NAND patches from Boris, but since Brian is very busy
these days with other stuff and Boris is not yet member of the
kernel.org web of trust I stepped in.
Boris will be in Berlin at ELCE, I'll sign his key and hopefully other
Kernel developers too such that he can issue his own pull requests
soon.
Summary:
- Fix a wrong OOB layout definition in the mxc driver
- Fix incorrect ECC handling in the mtk driver"
* tag 'tags/nand-fixes-for-4.8-rc8' of git://git.infradead.org/linux-ubifs:
mtd: nand: mxc: fix obiwan error in mxc_nand_v[12]_ooblayout_free() functions
mtd: nand: fix chances to create incomplete ECC data when writing
mtd: nand: fix generating over-boundary ECC data when writing
Pull configfs fix from Christoph Hellwig:
"One more trivial fix for the binary attribute code from Phil Turnbull"
* tag 'configfs-for-4.8-2' of git://git.infradead.org/users/hch/configfs:
configfs: Return -EFBIG from configfs_write_bin_file.
This provides the caller a feedback that a given hctx is not mapped and thus
no command can be sent on it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
In the mipsr2_decoder() function, used to emulate pre-MIPSr6
instructions that were removed in MIPSr6, the init_fpu() function is
called if a removed pre-MIPSr6 floating point instruction is the first
floating point instruction used by the task. However, init_fpu()
performs varous actions that rely upon not being migrated. For example
in the most basic case it sets the coprocessor 0 Status.CU1 bit to
enable the FPU & then loads FP register context into the FPU registers.
If the task were to migrate during this time, it may end up attempting
to load FP register context on a different CPU where it hasn't set the
CU1 bit, leading to errors such as:
do_cpu invoked from kernel context![#2]:
CPU: 2 PID: 7338 Comm: fp-prctl Tainted: G D 4.7.0-00424-g49b0c82 #2
task: 838e4000 ti: 88d38000 task.ti: 88d38000
$ 0 : 00000000 00000001 ffffffff 88d3fef8
$ 4 : 838e4000 88d38004 00000000 00000001
$ 8 : 3400fc01 801f8020 808e9100 24000000
$12 : dbffffff 807b69d8 807b0000 00000000
$16 : 00000000 80786150 00400fc4 809c0398
$20 : 809c0338 0040273c 88d3ff28 808e9d30
$24 : 808e9d30 00400fb4
$28 : 88d38000 88d3fe88 00000000 8011a2ac
Hi : 0040273c
Lo : 88d3ff28
epc : 80114178 _restore_fp+0x10/0xa0
ra : 8011a2ac mipsr2_decoder+0xd5c/0x1660
Status: 1400fc03 KERNEL EXL IE
Cause : 1080002c (ExcCode 0b)
PrId : 0001a920 (MIPS I6400)
Modules linked in:
Process fp-prctl (pid: 7338, threadinfo=88d38000, task=838e4000, tls=766527d0)
Stack : 00000000 00000000 00000000 88d3fe98 00000000 00000000 809c0398 809c0338
808e9100 00000000 88d3ff28 00400fc4 00400fc4 0040273c 7fb69e18 004a0000
004a0000 004a0000 7664add0 8010de18 00000000 00000000 88d3fef8 88d3ff28
808e9100 00000000 766527d0 8010e534 000c0000 85755000 8181d580 00000000
00000000 00000000 004a0000 00000000 766527d0 7fb69e18 004a0000 80105c20
...
Call Trace:
[<80114178>] _restore_fp+0x10/0xa0
[<8011a2ac>] mipsr2_decoder+0xd5c/0x1660
[<8010de18>] do_ri+0x90/0x6b8
[<80105c20>] ret_from_exception+0x0/0x10
Fix this by disabling preemption around the call to init_fpu(), ensuring
that it starts & completes on one CPU.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Fixes: b0a668fb20 ("MIPS: kernel: mips-r2-to-r6-emul: Add R2 emulator for MIPS R6")
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # v4.0+
Patchwork: https://patchwork.linux-mips.org/patch/14305/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
If DBGUNDO() is enabled (FASTRETRANS_DEBUG > 1), a compile
error will happen, since inet6_sk(sk)->daddr became sk->sk_v6_daddr
Fixes: efe4208f47 ("ipv6: make lookups simpler and faster")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With TCP MTU probing enabled and offload TX checksumming disabled,
tcp_mtu_probe() calculated the wrong checksum when a fragment being copied
into the probe's SKB had an odd length. This was caused by the direct use
of skb_copy_and_csum_bits() to calculate the checksum, as it pads the
fragment being copied, if needed. When this fragment was not the last, a
subsequent call used the previous checksum without considering this
padding.
The effect was a stale connection in one way, as even retransmissions
wouldn't solve the problem, because the checksum was never recalculated for
the full SKB length.
Signed-off-by: Douglas Caetano dos Santos <douglascs@taghos.com.br>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marc Kleine-Budde says:
====================
pull-request: can 2016-09-22
this is a pull request of one patch for the upcoming linux-4.8 release.
The patch by Sergei Miroshnichenko fixes a potential deadlock in the generic
CAN device code that cann occour after a bus-off.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Handle read-only cases when CONFIG_DEBUG_RODATA (4.0) or
CONFIG_DEBUG_SET_MODULE_RONX (3.18) are enabled by using
aarch64_insn_write() instead of probe_kernel_write() as introduced by
commit 2f896d5866 ("arm64: use fixmap for text patching") in 4.0.
Fixes: 11d91a770f ("arm64: Add CONFIG_DEBUG_SET_MODULE_RONX support")
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The wq_numa_init() function makes a private CPU to node map by calling
cpu_to_node() early in the boot process, before the non-boot CPUs are
brought online. Since the default implementation of cpu_to_node()
returns zero for CPUs that have never been brought online, the
workqueue system's view is that *all* CPUs are on node zero.
When the unbound workqueue for a non-zero node is created, the
tsk_cpus_allowed() for the worker threads is the empty set because
there are, in the view of the workqueue system, no CPUs on non-zero
nodes. The code in try_to_wake_up() using this empty cpumask ends up
using the cpumask empty set value of NR_CPUS as an index into the
per-CPU area pointer array, and gets garbage as it is one past the end
of the array. This results in:
[ 0.881970] Unable to handle kernel paging request at virtual address fffffb1008b926a4
[ 1.970095] pgd = fffffc00094b0000
[ 1.973530] [fffffb1008b926a4] *pgd=0000000000000000, *pud=0000000000000000, *pmd=0000000000000000
[ 1.982610] Internal error: Oops: 96000004 [#1] SMP
[ 1.987541] Modules linked in:
[ 1.990631] CPU: 48 PID: 295 Comm: cpuhp/48 Tainted: G W 4.8.0-rc6-preempt-vol+ #9
[ 1.999435] Hardware name: Cavium ThunderX CN88XX board (DT)
[ 2.005159] task: fffffe0fe89cc300 task.stack: fffffe0fe8b8c000
[ 2.011158] PC is at try_to_wake_up+0x194/0x34c
[ 2.015737] LR is at try_to_wake_up+0x150/0x34c
[ 2.020318] pc : [<fffffc00080e7468>] lr : [<fffffc00080e7424>] pstate: 600000c5
[ 2.027803] sp : fffffe0fe8b8fb10
[ 2.031149] x29: fffffe0fe8b8fb10 x28: 0000000000000000
[ 2.036522] x27: fffffc0008c63bc8 x26: 0000000000001000
[ 2.041896] x25: fffffc0008c63c80 x24: fffffc0008bfb200
[ 2.047270] x23: 00000000000000c0 x22: 0000000000000004
[ 2.052642] x21: fffffe0fe89d25bc x20: 0000000000001000
[ 2.058014] x19: fffffe0fe89d1d00 x18: 0000000000000000
[ 2.063386] x17: 0000000000000000 x16: 0000000000000000
[ 2.068760] x15: 0000000000000018 x14: 0000000000000000
[ 2.074133] x13: 0000000000000000 x12: 0000000000000000
[ 2.079505] x11: 0000000000000000 x10: 0000000000000000
[ 2.084879] x9 : 0000000000000000 x8 : 0000000000000000
[ 2.090251] x7 : 0000000000000040 x6 : 0000000000000000
[ 2.095621] x5 : ffffffffffffffff x4 : 0000000000000000
[ 2.100991] x3 : 0000000000000000 x2 : 0000000000000000
[ 2.106364] x1 : fffffc0008be4c24 x0 : ffffff0ffffada80
[ 2.111737]
[ 2.113236] Process cpuhp/48 (pid: 295, stack limit = 0xfffffe0fe8b8c020)
[ 2.120102] Stack: (0xfffffe0fe8b8fb10 to 0xfffffe0fe8b90000)
[ 2.125914] fb00: fffffe0fe8b8fb80 fffffc00080e7648
.
.
.
[ 2.442859] Call trace:
[ 2.445327] Exception stack(0xfffffe0fe8b8f940 to 0xfffffe0fe8b8fa70)
[ 2.451843] f940: fffffe0fe89d1d00 0000040000000000 fffffe0fe8b8fb10 fffffc00080e7468
[ 2.459767] f960: fffffe0fe8b8f980 fffffc00080e4958 ffffff0ff91ab200 fffffc00080e4b64
[ 2.467690] f980: fffffe0fe8b8f9d0 fffffc00080e515c fffffe0fe8b8fa80 0000000000000000
[ 2.475614] f9a0: fffffe0fe8b8f9d0 fffffc00080e58e4 fffffe0fe8b8fa80 0000000000000000
[ 2.483540] f9c0: fffffe0fe8d10000 0000000000000040 fffffe0fe8b8fa50 fffffc00080e5ac4
[ 2.491465] f9e0: ffffff0ffffada80 fffffc0008be4c24 0000000000000000 0000000000000000
[ 2.499387] fa00: 0000000000000000 ffffffffffffffff 0000000000000000 0000000000000040
[ 2.507309] fa20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 2.515233] fa40: 0000000000000000 0000000000000000 0000000000000000 0000000000000018
[ 2.523156] fa60: 0000000000000000 0000000000000000
[ 2.528089] [<fffffc00080e7468>] try_to_wake_up+0x194/0x34c
[ 2.533723] [<fffffc00080e7648>] wake_up_process+0x28/0x34
[ 2.539275] [<fffffc00080d3764>] create_worker+0x110/0x19c
[ 2.544824] [<fffffc00080d69dc>] alloc_unbound_pwq+0x3cc/0x4b0
[ 2.550724] [<fffffc00080d6bcc>] wq_update_unbound_numa+0x10c/0x1e4
[ 2.557066] [<fffffc00080d7d78>] workqueue_online_cpu+0x220/0x28c
[ 2.563234] [<fffffc00080bd288>] cpuhp_invoke_callback+0x6c/0x168
[ 2.569398] [<fffffc00080bdf74>] cpuhp_up_callbacks+0x44/0xe4
[ 2.575210] [<fffffc00080be194>] cpuhp_thread_fun+0x13c/0x148
[ 2.581027] [<fffffc00080dfbac>] smpboot_thread_fn+0x19c/0x1a8
[ 2.586929] [<fffffc00080dbd64>] kthread+0xdc/0xf0
[ 2.591776] [<fffffc0008083380>] ret_from_fork+0x10/0x50
[ 2.597147] Code: b00057e1 91304021 91005021 b8626822 (b8606821)
[ 2.603464] ---[ end trace 58c0cd36b88802bc ]---
[ 2.608138] Kernel panic - not syncing: Fatal exception
Fix by moving call to numa_store_cpu_info() for all CPUs into
smp_prepare_cpus(), which happens before wq_numa_init(). Since
smp_store_cpu_info() now contains only a single function call,
simplify by removing the function and out-lining its contents.
Suggested-by: Robert Richter <rric@kernel.org>
Fixes: 1a2db30034 ("arm64, numa: Add NUMA support for arm64 platforms.")
Cc: <stable@vger.kernel.org> # 4.7.x-
Signed-off-by: David Daney <david.daney@cavium.com>
Reviewed-by: Robert Richter <rrichter@cavium.com>
Tested-by: Yisheng Xie <xieyisheng1@huawei.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
If the i2c device is already runtime suspended, if qup_i2c_suspend is
executed during suspend-to-idle or suspend-to-ram it will result in the
following splat:
WARNING: CPU: 3 PID: 1593 at drivers/clk/clk.c:476 clk_core_unprepare+0x80/0x90
Modules linked in:
CPU: 3 PID: 1593 Comm: bash Tainted: G W 4.8.0-rc3 #14
Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
PC is at clk_core_unprepare+0x80/0x90
LR is at clk_unprepare+0x28/0x40
pc : [<ffff0000086eecf0>] lr : [<ffff0000086f0c58>] pstate: 60000145
Call trace:
clk_core_unprepare+0x80/0x90
qup_i2c_disable_clocks+0x2c/0x68
qup_i2c_suspend+0x10/0x20
platform_pm_suspend+0x24/0x68
...
This patch fixes the issue by executing qup_i2c_pm_suspend_runtime
conditionally in qup_i2c_suspend.
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Pull media fixes from Mauro Carvalho Chehab:
- several fixes for new drivers added for Kernel 4.8 addition (cec
core, pulse8 cec driver and Mediatek vcodec)
- a regression fix for cx23885 and saa7134 drivers
- an important fix for rcar-fcp, making rcar_fcp_enable() return 0 on
success
* tag 'media/v4.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (25 commits)
[media] cx23885/saa7134: assign q->dev to the PCI device
[media] rcar-fcp: Make sure rcar_fcp_enable() returns 0 on success
[media] cec: fix ioctl return code when not registered
[media] cec: don't Feature Abort broadcast msgs when unregistered
[media] vcodec:mediatek: Refine VP8 encoder driver
[media] vcodec:mediatek: Refine H264 encoder driver
[media] vcodec:mediatek: change H264 profile default to profile high
[media] vcodec:mediatek: Add timestamp and timecode copy for V4L2 Encoder
[media] vcodec:mediatek: Fix visible_height larger than coded_height issue in s_fmt_out
[media] vcodec:mediatek: Fix fops_vcodec_release flow for V4L2 Encoder
[media] vcodec:mediatek:code refine for v4l2 Encoder driver
[media] cec-funcs.h: add missing vendor-specific messages
[media] cec-edid: check for IEEE identifier
[media] pulse8-cec: fix error handling
[media] pulse8-cec: set correct Signal Free Time
[media] mtk-vcodec: add HAS_DMA dependency
[media] cec: ignore messages when log_addr_mask == 0
[media] cec: add item to TODO
[media] cec: set unclaimed addresses to CEC_LOG_ADDR_INVALID
[media] cec: add CEC_LOG_ADDRS_FL_ALLOW_UNREG_FALLBACK flag
...
Pull networking fixes from David Miller:
"Mostly small bits scattered all over the place, which is usually how
things go this late in the -rc series.
1) Proper driver init device resets in bnx2, from Baoquan He.
2) Fix accounting overflow in __tcp_retransmit_skb(),
sk_forward_alloc, and ip_idents_reserve, from Eric Dumazet.
3) Fix crash in bna driver ethtool stats handling, from Ivan Vecera.
4) Missing check of skb_linearize() return value in mac80211, from
Johannes Berg.
5) Endianness fix in nf_table_trace dumps, from Liping Zhang.
6) SSN comparison fix in SCTP, from Marcelo Ricardo Leitner.
7) Update DSA and b44 MAINTAINERS entries.
8) Make input path of vti6 driver work again, from Nicolas Dichtel.
9) Off-by-one in mlx4, from Sebastian Ott.
10) Fix fallback route lookup handling in ipv6, from Vincent Bernat.
11) Fix stack corruption on probe in qed driver, from Yuval Mintz.
12) PHY init fixes in r8152 from Hayes Wang.
13) Missing SKB free in irda_accept error path, from Phil Turnbull"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits)
tcp: properly account Fast Open SYN-ACK retrans
tcp: fix under-accounting retransmit SNMP counters
MAINTAINERS: Update b44 maintainer.
net: get rid of an signed integer overflow in ip_idents_reserve()
net/mlx4_core: Fix to clean devlink resources
net: can: ifi: Configure transmitter delay
vti6: fix input path
ipmr, ip6mr: return lastuse relative to now
r8152: disable ALDPS and EEE before setting PHY
r8152: remove r8153_enable_eee
r8152: move PHY settings to hw_phy_cfg
r8152: move enabling PHY
r8152: move some functions
cxgb4/cxgb4vf: Allocate more queues for 25G and 100G adapter
qed: Fix stack corruption on probe
MAINTAINERS: Add an entry for the core network DSA code
net: ipv6: fallback to full lookup if table lookup is unsuitable
net/mlx5: E-Switch, Handle mode change failures
net/mlx5: E-Switch, Fix error flow in the SRIOV e-switch init code
net/mlx5: Fix flow counter bulk command out mailbox allocation
...
Commit 815806e39b ("regmap: drop cache if the bus transfer error")
added a call to regcache_drop_region() to error path in
_regmap_raw_write(). However that path runs with regmap lock taken,
and regcache_drop_region() tries to re-take it, causing a deadlock.
Fix that by calling map->cache_ops->drop() directly.
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
As the software RSA implementation now produces fixed-length
output, we need to eliminate leading zeros in the calling code
instead.
This patch does just that for pkcs1pad decryption while signature
verification was fixed in an earlier patch.
Fixes: 9b45b7bba3 ("crypto: rsa - Generate fixed-length output")
Reported-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A timer was used to restart after the bus-off state, leading to a
relatively large can_restart() executed in an interrupt context,
which in turn sets up pinctrl. When this happens during system boot,
there is a high probability of grabbing the pinctrl_list_mutex,
which is locked already by the probe() of other device, making the
kernel suspect a deadlock condition [1].
To resolve this issue, the restart_timer is replaced by a delayed
work.
[1] https://github.com/victronenergy/venus/issues/24
Signed-off-by: Sergei Miroshnichenko <sergeimir@emcraft.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
When there is no Card which is set to "broken-cd", it's displayed a clock
information continuously. Because it's polling for detecting card.
This patch is fixed this problem.
Fixes: 65257a0dee ("mmc: dw_mmc: remove UBSAN warning in dw_mci_setup_bus()")
Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This reverts commit aff51175cd.
The commit caused fence timeouts within nvc0_screen_destroy and most likely
other places as well.
The most obvious effect is, that userspace processes take minutes to
actually quit.
Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Since the TFO socket is accepted right off SYN-data, the socket
owner can call getsockopt(TCP_INFO) to collect ongoing SYN-ACK
retransmission or timeout stats (i.e., tcpi_total_retrans,
tcpi_retransmits). Currently those stats are only updated
upon handshake completes. This patch fixes it.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes these under-accounting SNMP rtx stats
LINUX_MIB_TCPFORWARDRETRANS
LINUX_MIB_TCPFASTRETRANS
LINUX_MIB_TCPSLOWSTARTRETRANS
when retransmitting TSO packets
Fixes: 10d3be5692 ("tcp-tso: do not split TSO packets at retransmit time")
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
pull request (net): ipsec 2016-09-21
1) Propagate errors on security context allocation.
From Mathias Krause.
2) Fix inbound policy checks for inter address family tunnels.
From Thomas Zeitlhofer.
3) Fix an old memory leak on aead algorithm usage.
From Ilan Tayari.
4) A recent patch fixed a possible NULL pointer dereference
but broke the vti6 input path.
Fix from Nicolas Dichtel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Marc Kleine-Budde says:
====================
pull-request: can 2016-09-21
this is another pull request of one patch for the upcoming linux-4.8 release.
Marek Vasut fixes the CAN-FD bit rate switch in the ifi driver by configuring
the transmitter delay.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko reported an UBSAN warning happening in ip_idents_reserve()
[] UBSAN: Undefined behaviour in ./arch/x86/include/asm/atomic.h:156:11
[] signed integer overflow:
[] -2117905507 + -695755206 cannot be represented in type 'int'
Since we do not have uatomic_add_return() yet, use atomic_cmpxchg()
so that the arithmetics can be done using unsigned int.
Fixes: 04ca6973f7 ("ip: make IP identifiers less predictable")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch cleans devlink resources by calling devlink_port_unregister()
to avoid the following issues:
- Kernel panic when triggering reset flow.
- Memory leak due to unfreed resources in mlx4_init_port_info().
Fixes: 09d4d087cd ("mlx4: Implement devlink interface")
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kalle Valo says:
====================
wireless-drivers fixes for 4.8
iwlwifi
* fix to prevent firmware crash when sending off-channel frames
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If the subvol/snapshot create/destroy ioctls are passed a regular file
with execute permissions set, we'll eventually Oops while trying to do
inode->i_op->lookup via lookup_one_len.
This patch ensures that the file descriptor refers to a directory.
Fixes: cb8e70901d (Btrfs: Fix subvolume creation locking rules)
Fixes: 76dda93c6a (Btrfs: add snapshot/subvolume destroy ioctl)
Cc: <stable@vger.kernel.org> #v2.6.29+
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
btrfs/022 was spitting a warning for the case that we exceed the quota. If we
fail to make our quota reservation we need to clean up our data space
reservation. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Tested-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
The cached value of the last selected channel prevents retries on the
next call, even on failure to update the selected channel. Fix that.
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
For the DSMs where the kernel knows the format of the output buffer and
originates those DSMs from within the kernel, return -EIO for any
non-zero status. If the BIOS is indicating a status that we do not know
how to handle, fail the DSM.
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The internal alloc_nvdimm_map() helper might fail, particularly if the
memory region is already busy. Report request_mem_region() failures and
check for the failure.
Reported-by: Ryan Chen <ryan.chan105@gmail.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
the eg20t driver call request_irq() function before the pch_base_address,
base address of i2c controller's register, is assigned an effective value.
there is one possible scenario that an interrupt which isn't inside eg20t
arrives immediately after request_irq() is executed when i2c controller
shares an interrupt number with others. since the interrupt handler
pch_i2c_handler() has already active as shared action, it will be called
and read its own register to determine if this interrupt is from itself.
At that moment, since base address of i2c registers is not remapped
in kernel space yet,so the INT handler will access an illegal address
and then a error occurs.
Signed-off-by: Yadi.hu <yadi.hu@windriver.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
The page structures associated with the vDSO pages in the kernel image
are calculated using virt_to_page(), which uses __pa() under the hood to
find the pfn associated with the virtual address. The vDSO data pointers
however point to kernel symbols, so __pa_symbol() should really be used
instead.
Since there is no equivalent to virt_to_page() which uses __pa_symbol(),
fix init_vdso_image() to work directly with pfns, calculated with
__phys_to_pfn(__pa_symbol(...)).
This issue broke the Malta Enhanced Virtual Addressing (EVA)
configuration which has a non-default implementation of __pa_symbol().
This is because it uses a physical alias so that the kernel executes
from KSeg0 (VA 0x80000000 -> PA 0x00000000), while RAM is provided to
the kernel in the KUSeg range (VA 0x00000000 -> PA 0x80000000) which
uses the same underlying RAM.
Since there are no page structures associated with the low physical
address region, some arbitrary kernel memory would be interpreted as a
page structure for the vDSO pages and badness ensues.
Fixes: ebb5e78cc6 ("MIPS: Initial implementation of a VDSO")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.4.x-
Patchwork: https://patchwork.linux-mips.org/patch/14229/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Configure the transmitter delay register at +0x1c to correctly handle
the CAN FD bitrate switch (BRS). This moves the SSP (secondary sample
point) to a proper offset, so that the TDC mechanism works and won't
generate error frames on the CAN link.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Since commit 1625f45299, vti6 is broken, all input packets are dropped
(LINUX_MIB_XFRMINNOSTATES is incremented).
XFRM_TUNNEL_SKB_CB(skb)->tunnel.ip6 is set by vti6_rcv() before calling
xfrm6_rcv()/xfrm6_rcv_spi(), thus we cannot set to NULL that value in
xfrm6_rcv_spi().
A new function xfrm6_rcv_tnl() that enables to pass a value to
xfrm6_rcv_spi() is added, so that xfrm6_rcv() is not touched (this function
is used in several handlers).
CC: Alexey Kodanev <alexey.kodanev@oracle.com>
Fixes: 1625f45299 ("net/xfrm_input: fix possible NULL deref of tunnel.ip6->parms.i_key")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When I introduced the lastuse member I made a subtle error because it was
returned as an absolute value but that is meaningless to user-space as it
doesn't allow to see how old exactly an entry is. Let's make it similar to
how the bridge returns such values and make it relative to "now" (jiffies).
This allows us to show the actual age of the entries and is much more
useful (e.g. user-space daemons can age out entries, iproute2 can display
the lastuse properly).
Fixes: 43b9e12740 ("net: ipmr/ip6mr: add support for keeping an entry age")
Reported-by: Satish Ashok <sashok@cumulusnetworks.com>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hayes Wang says:
====================
r8152: correct the flow of PHY
First, to enable the PHY as early as possible. Some settings may fail if the
PHY is power down.
Move the other PHY settings to hw_phy_cfg() to make sure the order is correct.
Finally, disable ALDPS and EEE before updating the PHY for RTL8153.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Disable ALDPS and EEE to avoid the possible failure when setting the PHY.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move enabling PHY to init(), otherwise some other settings may fail.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the following functions forward.
r8152_mmd_indirect()
r8152_mmd_read()
r8152_mmd_write()
r8152_eee_en()
r8152b_enable_eee()
r8153_eee_en()
r8153_enable_eee()
r8152b_enable_fc()
r8153_aldps_en()
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We were missing check for 25G and 100G while checking port speed,
which lead to less number of queues getting allocated for 25G & 100G
adapters and leading to low throughput. Adding the missing check for
both NIC and vNIC driver.
Also fixes port advertisement for 25G and 100G in ethtool output.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 5958d19a14 checks for prefetchable m64 BARs by comparing the
addresses instead of using resource flags. This broke SR-IOV as the m64
check in pnv_pci_ioda_fixup_iov_resources() fails.
The condition in pnv_pci_window_alignment() also changed to checking
only IORESOURCE_MEM_64 instead of both IORESOURCE_MEM_64 and
IORESOURCE_PREFETCH.
Revert these cases to the previous behaviour, adding a new helper function
to do so. This is named pnv_pci_is_m64_flags() to make it clear this
function is only looking at resource flags and should not be relied on for
non-SRIOV resources.
Fixes: 5958d19a14 ("Fix incorrect PE reservation attempt on some 64-bit BARs")
Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Marc Kleine-Budde says:
====================
pull-request: can 2016-09-19
this is a pull request of one patch for the upcoming linux-4.8 release.
The patch by Fabio Estevam fixes the pm handling in the flexcan driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull usercopy hardening fix from Kees Cook:
"Expand the arm64 vmalloc check to include skipping the module space
too"
* tag 'usercopy-v4.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
mm: usercopy: Check for module addresses
Switching iov_iter fault-in to multipages variants has exposed an old
bug in underlying fault_in_multipages_...(); they break if the range
passed to them wraps around. Normally access_ok() done by callers will
prevent such (and it's a guaranteed EFAULT - ERR_PTR() values fall into
such a range and they should not point to any valid objects).
However, on architectures where userland and kernel live in different
MMU contexts (e.g. s390) access_ok() is a no-op and on those a range
with a wraparound can reach fault_in_multipages_...().
Since any wraparound means EFAULT there, the fix is trivial - turn
those
while (uaddr <= end)
...
into
if (unlikely(uaddr > end))
return -EFAULT;
do
...
while (uaddr <= end);
Reported-by: Jan Stancek <jstancek@redhat.com>
Tested-by: Jan Stancek <jstancek@redhat.com>
Cc: stable@vger.kernel.org # v3.5+
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While running a compile on arm64, I hit a memory exposure
usercopy: kernel memory exposure attempt detected from fffffc0000f3b1a8 (buffer_head) (1 bytes)
------------[ cut here ]------------
kernel BUG at mm/usercopy.c:75!
Internal error: Oops - BUG: 0 [#1] SMP
Modules linked in: ip6t_rpfilter ip6t_REJECT
nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_broute bridge stp
llc ebtable_nat ip6table_security ip6table_raw ip6table_nat
nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle
iptable_security iptable_raw iptable_nat nf_conntrack_ipv4
nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle
ebtable_filter ebtables ip6table_filter ip6_tables vfat fat xgene_edac
xgene_enet edac_core i2c_xgene_slimpro i2c_core at803x realtek xgene_dma
mdio_xgene gpio_dwapb gpio_xgene_sb xgene_rng mailbox_xgene_slimpro nfsd
auth_rpcgss nfs_acl lockd grace sunrpc xfs libcrc32c sdhci_of_arasan
sdhci_pltfm sdhci mmc_core xhci_plat_hcd gpio_keys
CPU: 0 PID: 19744 Comm: updatedb Tainted: G W 4.8.0-rc3-threadinfo+ #1
Hardware name: AppliedMicro X-Gene Mustang Board/X-Gene Mustang Board, BIOS 3.06.12 Aug 12 2016
task: fffffe03df944c00 task.stack: fffffe00d128c000
PC is at __check_object_size+0x70/0x3f0
LR is at __check_object_size+0x70/0x3f0
...
[<fffffc00082b4280>] __check_object_size+0x70/0x3f0
[<fffffc00082cdc30>] filldir64+0x158/0x1a0
[<fffffc0000f327e8>] __fat_readdir+0x4a0/0x558 [fat]
[<fffffc0000f328d4>] fat_readdir+0x34/0x40 [fat]
[<fffffc00082cd8f8>] iterate_dir+0x190/0x1e0
[<fffffc00082cde58>] SyS_getdents64+0x88/0x120
[<fffffc0008082c70>] el0_svc_naked+0x24/0x28
fffffc0000f3b1a8 is a module address. Modules may have compiled in
strings which could get copied to userspace. In this instance, it
looks like "." which matches with a size of 1 byte. Extend the
is_vmalloc_addr check to be is_vmalloc_or_module_addr to cover
all possible cases.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Since the device hierarchy domain was added by commit c98c1822ee
("irqchip/mips-gic: Add device hierarchy domain"), GIC local interrupts
have been broken.
Users attempting to setup a per-cpu local IRQ, for example the GIC timer
clock events code in drivers/clocksource/mips-gic-timer.c, the
setup_percpu_irq function would refuse with -EINVAL because the GIC
irqchip driver never called irq_set_percpu_devid so the
IRQ_PER_CPU_DEVID flag was never set for the IRQ. This happens because
irq_set_percpu_devid was being called from the gic_irq_domain_map
function which is no longer called.
Doing only that runs into further problems because gic_dev_domain_alloc
set the struct irq_chip for all interrupts, local or shared, to
gic_level_irq_controller despite that only being suitable for shared
interrupts. The typical outcome of this is that gic_level_irq_controller
callback functions are called for local interrupts, and then hwirq
number calculations overflow & the driver ends up attempting to access
some invalid register with an address calculated from an invalid hwirq
number. Best case scenario is that this then leads to a bus error. This
is fixed by abstracting the setup of the hwirq & chip to a new function
gic_setup_dev_chip which is used by both the root GIC IRQ domain & the
device domain.
Finally, decoding local interrupts failed because gic_dev_domain_alloc
only called irq_domain_alloc_irqs_parent for shared interrupts. Local
ones were therefore never associated with hwirqs in the root GIC IRQ
domain and the virq in gic_handle_local_int would always be 0. This is
fixed by calling irq_domain_alloc_irqs_parent unconditionally & having
gic_irq_domain_alloc handle both local & shared interrupts, which is
easy due to the aforementioned abstraction of chip setup into
gic_setup_dev_chip.
This fixes use of the MIPS GIC timer for clock events, which has been
broken since c98c1822ee ("irqchip/mips-gic: Add device hierarchy
domain") but hadn't been noticed due to a silent fallback to the MIPS
coprocessor 0 count/compare clock events device.
Fixes: c98c1822ee ("irqchip/mips-gic: Add device hierarchy domain")
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Qais Yousef <qsyousef@gmail.com>
Cc: stable@vger.kernel.org
Cc: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/20160913165335.31389-1-paul.burton@imgtec.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We hit hardened usercopy feature check for kernel text access by reading
kcore file:
usercopy: kernel memory exposure attempt detected from ffffffff8179a01f (<kernel text>) (4065 bytes)
kernel BUG at mm/usercopy.c:75!
Bypassing this check for kcore by adding bounce buffer for ktext data.
Reported-by: Steve Best <sbest@redhat.com>
Fixes: f5509cc18d ("mm: Hardened usercopy")
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull EFI fixes from Matt Fleming:
* Fix a boot hang on large memory machines (multiple terabyte) caused
by type conversion errors in the x86 PAT code (Matt Fleming)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since commit 4d4c474124 ("perf/x86/intel/bts: Fix BTS PMI detection")
my box goes boom on boot:
| .... node #0, CPUs: #1#2#3#4#5#6#7
| BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
| IP: [<ffffffff8100c463>] intel_bts_interrupt+0x43/0x130
| Call Trace:
| <NMI> d [<ffffffff8100b341>] intel_pmu_handle_irq+0x51/0x4b0
| [<ffffffff81004d47>] perf_event_nmi_handler+0x27/0x40
This happens because the code introduced in this commit dereferences the
debug store pointer unconditionally. The debug store is not guaranteed to
be available, so a NULL pointer check as on other places is required.
Fixes: 4d4c474124 ("perf/x86/intel/bts: Fix BTS PMI detection")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: vince@deater.net
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/20160920131220.xg5pbdjtznszuyzb@breakpoint.cc
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
There's a mixture of signed 32-bit and unsigned 32-bit and 64-bit data
types used for keeping track of how many pages have been mapped.
This leads to hangs during boot when mapping large numbers of pages
(multiple terabytes, as reported by Waiman) because those values are
interpreted as being negative.
commit 742563777e ("x86/mm/pat: Avoid truncation when converting
cpa->numpages to address") fixed one of those bugs, but there is
another lurking in __change_page_attr_set_clr().
Additionally, the return value type for the populate_*() functions can
return negative values when a large number of pages have been mapped,
triggering the error paths even though no error occurred.
Consistently use 64-bit types on 64-bit platforms when counting pages.
Even in the signed case this gives us room for regions 8PiB
(pebibytes) in size whilst still allowing the usual negative value
error checking idiom.
Reported-by: Waiman Long <waiman.long@hpe.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
CC: Theodore Ts'o <tytso@mit.edu>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Scott J Norton <scott.norton@hpe.com>
Cc: Douglas Hatch <doug.hatch@hpe.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Commit fe56b9e6a8 ("qed: Add module with basic common support")
has introduced a stack corruption during probe, where filling a
local struct with data to be sent to management firmware is incorrectly
filled; The data is written outside of the struct and corrupts
the stack.
Changes from v1:
----------------
- Correct the value written [Caught by David Laight]
Fixes: fe56b9e6a8 ("qed: Add module with basic common support")
Signed-off-by: Yuval Mintz <Yuval.Mintz@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The core distributed switch architecture code currently does not have
a MAINTAINERS entry, which results in some contributions not landing
in the right peoples inbox.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 8c14586fc3 ("net: ipv6: Use passed in table for nexthop
lookups") introduced a regression: insertion of an IPv6 route in a table
not containing the appropriate connected route for the gateway but which
contained a non-connected route (like a default gateway) fails while it
was previously working:
$ ip link add eth0 type dummy
$ ip link set up dev eth0
$ ip addr add 2001:db8::1/64 dev eth0
$ ip route add ::/0 via 2001:db8::5 dev eth0 table 20
$ ip route add 2001:db8:cafe::1/128 via 2001:db8::6 dev eth0 table 20
RTNETLINK answers: No route to host
$ ip -6 route show table 20
default via 2001:db8::5 dev eth0 metric 1024 pref medium
After this patch, we get:
$ ip route add 2001:db8:cafe::1/128 via 2001:db8::6 dev eth0 table 20
$ ip -6 route show table 20
2001:db8:cafe::1 via 2001:db8::6 dev eth0 metric 1024 pref medium
default via 2001:db8::5 dev eth0 metric 1024 pref medium
Fixes: 8c14586fc3 ("net: ipv6: Use passed in table for nexthop lookups")
Signed-off-by: Vincent Bernat <vincent@bernat.im>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Tested-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Or Gerlitz says:
====================
mlx5 fixes to 4.8-rc6
This series series has a fix from Roi to memory corruption bug in
the bulk flow counters code and two late and hopefully last fixes
from me to the new eswitch offloads code.
Series done over net commit 37dd348 "bna: fix crash in bnad_get_strings()"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
E-switch mode changes involve creating HW tables, potentially allocating
netdevices, etc, and things can fail. Add an attempt to rollback to the
existing mode when changing to the new mode fails. Only if rollback fails,
getting proper SRIOV functionality requires module unload or sriov
disablement/enablement.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When enablement of the SRIOV e-switch in certain mode (switchdev or legacy)
fails, we must set the mode to none. Otherwise, we'll run into double free
based crashes when further attempting to deal with the e-switch (such
as when disabling sriov or unloading the driver).
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The FW command output length should be only the length of struct
mlx5_cmd_fc_bulk out field. Failing to do so will cause the memcpy
call which is invoked later in the driver to write over wrong memory
address and corrupt kernel memory which results in random crashes.
This bug was found using the kernel address sanitizer (kasan).
Fixes: a351a1b03b ('net/mlx5: Introduce bulk reading of flow counters')
Signed-off-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
gic_raise_softirq() walks the list of cpus using for_each_cpu(), it calls
gic_compute_target_list() which advances the iterator by the number of
CPUs in the cluster.
If gic_compute_target_list() reaches the last CPU it leaves the iterator
pointing at the last CPU. This means the next time round the for_each_cpu()
loop cpumask_next() will be called with an invalid CPU.
This triggers a warning when built with CONFIG_DEBUG_PER_CPU_MAPS:
[ 3.077738] GICv3: CPU1: found redistributor 1 region 0:0x000000002f120000
[ 3.077943] CPU1: Booted secondary processor [410fd0f0]
[ 3.078542] ------------[ cut here ]------------
[ 3.078746] WARNING: CPU: 1 PID: 0 at ../include/linux/cpumask.h:121 gic_raise_softirq+0x12c/0x170
[ 3.078812] Modules linked in:
[ 3.078869]
[ 3.078930] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-rc5+ #5188
[ 3.078994] Hardware name: Foundation-v8A (DT)
[ 3.079059] task: ffff80087a1a0080 task.stack: ffff80087a19c000
[ 3.079145] PC is at gic_raise_softirq+0x12c/0x170
[ 3.079226] LR is at gic_raise_softirq+0xa4/0x170
[ 3.079296] pc : [<ffff0000083ead24>] lr : [<ffff0000083eac9c>] pstate: 200001c9
[ 3.081139] Call trace:
[ 3.081202] Exception stack(0xffff80087a19fbe0 to 0xffff80087a19fd10)
[ 3.082269] [<ffff0000083ead24>] gic_raise_softirq+0x12c/0x170
[ 3.082354] [<ffff00000808e614>] smp_send_reschedule+0x34/0x40
[ 3.082433] [<ffff0000080e80a0>] resched_curr+0x50/0x88
[ 3.082512] [<ffff0000080e89d0>] check_preempt_curr+0x60/0xd0
[ 3.082593] [<ffff0000080e8a60>] ttwu_do_wakeup+0x20/0xe8
[ 3.082672] [<ffff0000080e8bb8>] ttwu_do_activate+0x90/0xc0
[ 3.082753] [<ffff0000080ea9a4>] try_to_wake_up+0x224/0x370
[ 3.082836] [<ffff0000080eabc8>] default_wake_function+0x10/0x18
[ 3.082920] [<ffff000008103134>] __wake_up_common+0x5c/0xa0
[ 3.083003] [<ffff0000081031f4>] __wake_up_locked+0x14/0x20
[ 3.083086] [<ffff000008103f80>] complete+0x40/0x60
[ 3.083168] [<ffff00000808df7c>] secondary_start_kernel+0x15c/0x1d0
[ 3.083240] [<00000000808911a4>] 0x808911a4
[ 3.113401] Detected PIPT I-cache on CPU2
Avoid updating the iterator if the next call to cpumask_next() would
cause the for_each_cpu() loop to exit.
There is no change to gic_raise_softirq()'s behaviour, (cpumask_next()s
eventual call to _find_next_bit() will return early as start >= nbits),
this patch just silences the warning.
Fixes: 021f653791 ("irqchip: gic-v3: Initial support for GICv3")
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Jason Cooper <jason@lakedaemon.net>
Link: http://lkml.kernel.org/r/1474306155-3303-1-git-send-email-james.morse@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Merge fixes from Andrew Morton:
"20 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
rapidio/rio_cm: avoid GFP_KERNEL in atomic context
Revert "ocfs2: bump up o2cb network protocol version"
ocfs2: fix start offset to ocfs2_zero_range_for_truncate()
cgroup: duplicate cgroup reference when cloning sockets
mm: memcontrol: make per-cpu charge cache IRQ-safe for socket accounting
ocfs2: fix double unlock in case retry after free truncate log
fanotify: fix list corruption in fanotify_get_response()
fsnotify: add a way to stop queueing events on group shutdown
ocfs2: fix trans extend while free cached blocks
ocfs2: fix trans extend while flush truncate log
ipc/shm: fix crash if CONFIG_SHMEM is not set
mm: fix the page_swap_info() BUG_ON check
autofs: use dentry flags to block walks during expire
MAINTAINERS: update email for VLYNQ bus entry
mm: avoid endless recursion in dump_page()
mm, thp: fix leaking mapped pte in __collapse_huge_page_swapin()
khugepaged: fix use-after-free in collapse_huge_page()
MAINTAINERS: Maik has moved
ocfs2/dlm: fix race between convert and migration
mem-hotplug: don't clear the only node in new_node_page()
If we punch a hole on a reflink such that following conditions are met:
1. start offset is on a cluster boundary
2. end offset is not on a cluster boundary
3. (end offset is somewhere in another extent) or
(hole range > MAX_CONTIG_BYTES(1MB)),
we dont COW the first cluster starting at the start offset. But in this
case, we were wrongly passing this cluster to
ocfs2_zero_range_for_truncate() to zero out. This will modify the
cluster in place and zero it in the source too.
Fix this by skipping this cluster in such a scenario.
To reproduce:
1. Create a random file of say 10 MB
xfs_io -c 'pwrite -b 4k 0 10M' -f 10MBfile
2. Reflink it
reflink -f 10MBfile reflnktest
3. Punch a hole at starting at cluster boundary with range greater that
1MB. You can also use a range that will put the end offset in another
extent.
fallocate -p -o 0 -l 1048615 reflnktest
4. sync
5. Check the first cluster in the source file. (It will be zeroed out).
dd if=10MBfile iflag=direct bs=<cluster size> count=1 | hexdump -C
Link: http://lkml.kernel.org/r/1470957147-14185-1-git-send-email-ashish.samant@oracle.com
Signed-off-by: Ashish Samant <ashish.samant@oracle.com>
Reported-by: Saar Maoz <saar.maoz@oracle.com>
Reviewed-by: Srinivas Eeda <srinivas.eeda@oracle.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Joseph Qi <joseph.qi@huawei.com>
Cc: Eric Ren <zren@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
During cgroup2 rollout into production, we started encountering css
refcount underflows and css access crashes in the memory controller.
Splitting the heavily shared css reference counter into logical users
narrowed the imbalance down to the cgroup2 socket memory accounting.
The problem turns out to be the per-cpu charge cache. Cgroup1 had a
separate socket counter, but the new cgroup2 socket accounting goes
through the common charge path that uses a shared per-cpu cache for all
memory that is being tracked. Those caches are safe against scheduling
preemption, but not against interrupts - such as the newly added packet
receive path. When cache draining is interrupted by network RX taking
pages out of the cache, the resuming drain operation will put references
of in-use pages, thus causing the imbalance.
Disable IRQs during all per-cpu charge cache operations.
Fixes: f7e1cb6ec5 ("mm: memcontrol: account socket memory in unified hierarchy memory controller")
Link: http://lkml.kernel.org/r/20160914194846.11153-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: <stable@vger.kernel.org> [4.5+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If ocfs2_reserve_cluster_bitmap_bits() fails with ENOSPC, it will try to
free truncate log and then retry. Since ocfs2_try_to_free_truncate_log
will lock/unlock global bitmap inode, we have to unlock it before
calling this function. But when retry reserve and it fails with no
global bitmap inode lock taken, it will unlock again in error handling
branch and BUG.
This issue also exists if no need retry and then ocfs2_inode_lock fails.
So fix it.
Fixes: 2070ad1aeb ("ocfs2: retry on ENOSPC if sufficient space in truncate log")
Link: http://lkml.kernel.org/r/57D91939.6030809@huawei.com
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Jiufei Xue <xuejiufei@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
fanotify_get_response() calls fsnotify_remove_event() when it finds that
group is being released from fanotify_release() (bypass_perm is set).
However the event it removes need not be only in the group's notification
queue but it can have already moved to access_list (userspace read the
event before closing the fanotify instance fd) which is protected by a
different lock. Thus when fsnotify_remove_event() races with
fanotify_release() operating on access_list, the list can get corrupted.
Fix the problem by moving all the logic removing permission events from
the lists to one place - fanotify_release().
Fixes: 5838d4442b ("fanotify: fix double free of pending permission events")
Link: http://lkml.kernel.org/r/1473797711-14111-3-git-send-email-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reported-by: Miklos Szeredi <mszeredi@redhat.com>
Tested-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Every time, ocfs2_extend_trans() included a credit for truncate log
inode, but as that inode had been managed by jbd2 running transaction
first time, it will not consume that credit until
jbd2_journal_restart().
Since total credits to extend always included the un-consumed ones,
there will be more and more un-consumed credit, at last
jbd2_journal_restart() will fail due to credit number over the half of
max transction credit.
The following error was caught when unlinking a large file with many
extents:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 13626 at fs/jbd2/transaction.c:269 start_this_handle+0x4c3/0x510 [jbd2]()
Modules linked in: ocfs2 nfsd lockd grace nfs_acl auth_rpcgss sunrpc autofs4 ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs sd_mod sg ip6t_REJECT nf_reject_ipv6 nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi cxgb3 mdio ib_iser rdma_cm ib_cm iw_cm ib_sa ib_mad ib_core ib_addr ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ppdev xen_kbdfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea parport_pc parport pcspkr i2c_piix4 i2c_core acpi_cpufreq ext4 jbd2 mbcache xen_blkfront floppy pata_acpi ata_generic ata_piix dm_mirror dm_region_hash dm_log dm_mod
CPU: 0 PID: 13626 Comm: unlink Tainted: G W 4.1.12-37.6.3.el6uek.x86_64 #2
Hardware name: Xen HVM domU, BIOS 4.4.4OVM 02/11/2016
Call Trace:
dump_stack+0x48/0x5c
warn_slowpath_common+0x95/0xe0
warn_slowpath_null+0x1a/0x20
start_this_handle+0x4c3/0x510 [jbd2]
jbd2__journal_restart+0x161/0x1b0 [jbd2]
jbd2_journal_restart+0x13/0x20 [jbd2]
ocfs2_extend_trans+0x74/0x220 [ocfs2]
ocfs2_replay_truncate_records+0x93/0x360 [ocfs2]
__ocfs2_flush_truncate_log+0x13e/0x3a0 [ocfs2]
ocfs2_remove_btree_range+0x458/0x7f0 [ocfs2]
ocfs2_commit_truncate+0x1b3/0x6f0 [ocfs2]
ocfs2_truncate_for_delete+0xbd/0x380 [ocfs2]
ocfs2_wipe_inode+0x136/0x6a0 [ocfs2]
ocfs2_delete_inode+0x2a2/0x3e0 [ocfs2]
ocfs2_evict_inode+0x28/0x60 [ocfs2]
evict+0xab/0x1a0
iput_final+0xf6/0x190
iput+0xc8/0xe0
do_unlinkat+0x1b7/0x310
SyS_unlink+0x16/0x20
system_call_fastpath+0x12/0x71
---[ end trace 28aa7410e69369cf ]---
JBD2: unlink wants too many credits (251 > 128)
Link: http://lkml.kernel.org/r/1473674623-11810-1-git-send-email-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 62c230bc17 ("mm: add support for a filesystem to activate
swap files and use direct_IO for writing swap pages") replaced the
swap_aops dirty hook from __set_page_dirty_no_writeback() with
swap_set_page_dirty().
For normal cases without these special SWP flags code path falls back to
__set_page_dirty_no_writeback() so the behaviour is expected to be the
same as before.
But swap_set_page_dirty() makes use of the page_swap_info() helper to
get the swap_info_struct to check for the flags like SWP_FILE,
SWP_BLKDEV etc as desired for those features. This helper has
BUG_ON(!PageSwapCache(page)) which is racy and safe only for the
set_page_dirty_lock() path.
For the set_page_dirty() path which is often needed for cases to be
called from irq context, kswapd() can toggle the flag behind the back
while the call is getting executed when system is low on memory and
heavy swapping is ongoing.
This ends up with undesired kernel panic.
This patch just moves the check outside the helper to its users
appropriately to fix kernel panic for the described path. Couple of
users of helpers already take care of SwapCache condition so I skipped
them.
Link: http://lkml.kernel.org/r/1473460718-31013-1-git-send-email-santosh.shilimkar@oracle.com
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Joe Perches <joe@perches.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rik van Riel <riel@redhat.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jens Axboe <axboe@fb.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org> [4.7.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Somewhere along the way the autofs expire operation has changed to hold
a spin lock over expired dentry selection. The autofs indirect mount
expired dentry selection is complicated and quite lengthy so it isn't
appropriate to hold a spin lock over the operation.
Commit 47be61845c ("fs/dcache.c: avoid soft-lockup in dput()") added a
might_sleep() to dput() causing a WARN_ONCE() about this usage to be
issued.
But the spin lock doesn't need to be held over this check, the autofs
dentry info. flags are enough to block walks into dentrys during the
expire.
I've left the direct mount expire as it is (for now) because it is much
simpler and quicker than the indirect mount expire and adding spin lock
release and re-aquires would do nothing more than add overhead.
Fixes: 47be61845c ("fs/dcache.c: avoid soft-lockup in dput()")
Link: http://lkml.kernel.org/r/20160912014017.1773.73060.stgit@pluto.themaw.net
Signed-off-by: Ian Kent <raven@themaw.net>
Reported-by: Takashi Iwai <tiwai@suse.de>
Tested-by: Takashi Iwai <tiwai@suse.de>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: NeilBrown <neilb@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dump_page() uses page_mapcount() to get mapcount of the page.
page_mapcount() has VM_BUG_ON_PAGE(PageSlab(page)) as mapcount doesn't
make sense for slab pages and the field in struct page used for other
information.
It leads to recursion if dump_page() called for slub page and DEBUG_VM
is enabled:
dump_page() -> page_mapcount() -> VM_BUG_ON_PAGE() -> dump_page -> ...
Let's avoid calling page_mapcount() for slab pages in dump_page().
Link: http://lkml.kernel.org/r/20160908082137.131076-1-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit ac7cf246df ("ocfs2/dlm: fix race between convert and recovery")
checks if lockres master has changed to identify whether new master has
finished recovery or not. This will introduce a race that right after
old master does umount ( means master will change), a new convert
request comes.
In this case, it will reset lockres state to DLM_RECOVERING and then
retry convert, and then fail with lockres->l_action being set to
OCFS2_AST_INVALID, which will cause inconsistent lock level between
ocfs2 and dlm, and then finally BUG.
Since dlm recovery will clear lock->convert_pending in
dlm_move_lockres_to_recovery_list, we can use it to correctly identify
the race case between convert and recovery. So fix it.
Fixes: ac7cf246df ("ocfs2/dlm: fix race between convert and recovery")
Link: http://lkml.kernel.org/r/57CE1569.8010704@huawei.com
Signed-off-by: Joseph Qi <joseph.qi@huawei.com>
Signed-off-by: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 394e31d2ce ("mem-hotplug: alloc new page from a nearest
neighbor node when mem-offline") introduced new_node_page() for memory
hotplug.
In new_node_page(), the nid is cleared before calling
__alloc_pages_nodemask(). But if it is the only node of the system, and
the first round allocation fails, it will not be able to get memory from
an empty nodemask, and will trigger oom.
The patch checks whether it is the last node on the system, and if it
is, then don't clear the nid in the nodemask.
Fixes: 394e31d2ce ("mem-hotplug: alloc new page from a nearest neighbor node when mem-offline")
Link: http://lkml.kernel.org/r/1473044391.4250.19.camel@TP420
Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Reported-by: John Allen <jallen@linux.vnet.ibm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Xishi Qiu <qiuxishi@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Due to our compiler include directives, the build pathnames for header
files often end up being of the form "$srcdir/./include/linux/xyz.h",
which ends up having that extra "." path component after the build base
in it.
Teach faddr2line to skip that too, to make code generated in inline
functions in header files match the filename for the regular C files.
Rabin Vincent pointed out that I can't make a stricter regexp match by
using the " at " prefix for the pathname, because that ends up being
locale-dependent. But this does require that the path match be preceded
by a space, to make it a bit more strict (that matters mainly if we
didn't find any base_dir at all, and we only end up with the "./" part
of the match)
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Rabin Vincent <rabin@rab.in>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Right now, if slice is expired, we start a new slice. If a bio is
queued, we keep on extending slice by throtle_slice interval (100ms).
This worked well as long as pending timer function got executed with-in
few milli seconds of scheduled time. But looks like with recent changes
in timer subsystem, slack can be much longer depending on the expiry time
of the scheduled timer.
commit 500462a9de ("timers: Switch to a non-cascading wheel")
This means, by the time timer function gets executed, it is possible the
delay from scheduled time is more than 100ms. That means current code
will conclude that existing slice has expired and a new one needs to
be started. New slice will be 100ms by default and that will not be
sufficient to meet rate requirement of group given the bio size and
bio will not be dispatched and we will start a new timer function to
wait. And when that timer expires, same process will repeat and we
will wait again and this can easily be an infinite loop.
Solve this issue by starting a new slice only if throttle gropup is
empty. If it is not empty, that means there should be an active slice
going on. Ideally it should not be expired but given the slack, it is
possible that it has expired.
Reported-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Commit 480b6837aa "nvdimm: fix PHYS_PFN/PFN_PHYS mixup" identified
that we were passing an invalid address to devm_nvdimm_ioremap(). With
that fixed it exposed a bug in the memory reservation size for flush
hint tables. Since we map a full page we need to mock a full page of
memory to back the flush hint table entries.
Cc: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull crypto fixes from Herbert Xu:
"This fixes a potential weakness in IPsec CBC IV generation, as well as
a number of issues that arose out of an OOM crash on ARM with CTR-mode
AES"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: arm64/aes-ctr - fix NULL dereference in tail processing
crypto: arm/aes-ctr - fix NULL dereference in tail processing
crypto: skcipher - Fix blkcipher walk OOM crash
crypto: echainiv - Replace chaining with multiplication
Pull exynos and one stable ABI fix from Dave Airlie:
"One important drm 32/64 ABI fix came in so I'll dequeue what I have,
the rest is just exynos runtime pm fixes, but the net removal of code
seems like a win to me.
I'm going to be sporadic this week due to school holidays, so if
anything urgent turns up, Daniel will take care of it"
* tag 'drm-fixes-for-4.8-rc7' of git://people.freedesktop.org/~airlied/linux:
drm: Only use compat ioctl for addfb2 on X86/IA64
Subject: [PATCH, RESEND] drm: exynos: avoid unused function warning
drm/exynos: g2d: fix system and runtime pm integration
drm/exynos: rotator: fix system and runtime pm integration
drm/exynos: gsc: fix system and runtime pm integration
drm/exynos: fimc: fix system and runtime pm integration
exynos-drm: Fix unsupported GEM memory type error message to be clear
addr2line doesn't work with KASLR addresses. Add a basic addr2line
wrapper script which takes the 'func+offset/size' format as input.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
nd_activate_region() iomaps any hint addresses required when activating
a region. To prevent duplicate mappings it checks the PFN of the hint to
be mapped against the PFNs of the already mapped hints. Unfortunately it
doesn't convert the PFN back into a physical address before passing it
to devm_nvdimm_ioremap(). Instead it applies PHYS_PFN a second time
which ends about as well as you would imagine.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Fix a regression caused by commit 2bc46b3ad3 ("[media] media/pci:
convert drivers to use the new vb2_queue dev field").
Three places where q->dev should be set were missed, causing
a WARN.
Fixes: 2bc46b3ad3 ("[media] media/pci: convert drivers to use the new vb2_queue dev field").
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Marton Balint <cus@passwd.hu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Commit 1685ddbe35 ("MIPS: Octeon: Changes to support readq()/writeq()
usage.") added bitwise shift operations that assume that unsigned long
is always 64-bits. This broke the build of VDSO code, as it gets compiled
also in "faked" 32-bit mode. Althought the failing inline functions are
never executed in 32-bit mode, they still need to pass the compilation.
Fix by using 64-bit types explicitly.
The patch fixes the following build failure:
CC arch/mips/vdso/gettimeofday-o32.o
In file included from los/git/devel/linux/arch/mips/include/asm/io.h:32:0,
from los/git/devel/linux/arch/mips/include/asm/page.h:194,
from los/git/devel/linux/arch/mips/vdso/vdso.h:26,
from los/git/devel/linux/arch/mips/vdso/gettimeofday.c:11:
los/git/devel/linux/arch/mips/include/asm/mach-cavium-octeon/mangle-port.h: In function '__should_swizzle_bits':
los/git/devel/linux/arch/mips/include/asm/mach-cavium-octeon/mangle-port.h:19:40: error: right shift count >= width of type [-Werror=shift-count-overflow]
unsigned long did = ((unsigned long)a >> 40) & 0xff;
^~
Fixes: 1685ddbe35 ("MIPS: Octeon: Changes to support readq()/writeq() usage.")
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: David Daney <ddaney@caviumnetworks.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Steven J. Hill <steven.hill@cavium.com>
Cc: Alex Smith <alex.smith@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14039/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
cpu_has_fpu macro uses smp_processor_id() and is currently executed
with preemption enabled, that triggers the warning at runtime.
It is assumed throughout the kernel that if any CPU has an FPU, then all
CPUs would have an FPU as well, so it is safe to perform the check with
preemption enabled - change the code to use raw_ variant of the check to
avoid the warning.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org # 4.0+
Patchwork: https://patchwork.linux-mips.org/patch/14125/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
On a imx6ul-pico board the following error is seen during system suspend:
dpm_run_callback(): platform_pm_resume+0x0/0x54 returns -110
PM: Device 2090000.flexcan failed to resume: error -110
The reason for this suspend error is because when the CAN interface is not
active the clocks are disabled and then flexcan_chip_enable() will
always fail due to a timeout error.
In order to fix this issue, only call flexcan_chip_enable/disable()
when the CAN interface is active.
Based on a patch from Dong Aisheng in the NXP kernel.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
commit 1a6509d991 ("[IPSEC]: Add support for combined mode algorithms")
introduced aead. The function attach_aead kmemdup()s the algorithm
name during xfrm_state_construct().
However this memory is never freed.
Implementation has since been slightly modified in
commit ee5c23176f ("xfrm: Clone states properly on migration")
without resolving this leak.
This patch adds a kfree() call for the aead algorithm name.
Fixes: 1a6509d991 ("[IPSEC]: Add support for combined mode algorithms")
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Acked-by: Rami Rosen <roszenrami@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
commit a894cf6c5a ("mtd: nand: mxc: switch to mtd_ooblayout_ops")
introduced a regression accessing the OOB area from the mxc_nand
driver due to an Obiwan error in the mxc_nand_v[12]_ooblayout_free()
functions. They report a bogus oobregion { 64, 7 } which leads to
errors accessing bogus data when reading the oob area.
Prior to the commit the mtd-oobtest module could be run without any
errors. With the offending commit, this test fails with results like:
|Running mtd-oobtest
|
|=================================================
|mtd_oobtest: MTD device: 5
|mtd_oobtest: MTD device size 524288, eraseblock size 131072, page size 2048, count of eraseblocks 4, pages per eraseblock 64, OOB size 64
|mtd_test: scanning for bad eraseblocks
|mtd_test: scanned 4 eraseblocks, 0 are bad
|mtd_oobtest: test 1 of 5
|mtd_oobtest: writing OOBs of whole device
|mtd_oobtest: written up to eraseblock 0
|mtd_oobtest: written 4 eraseblocks
|mtd_oobtest: verifying all eraseblocks
|mtd_oobtest: error @addr[0x0:0x19] 0x9a -> 0x78 diff 0xe2
|mtd_oobtest: error @addr[0x0:0x1a] 0xcc -> 0x0 diff 0xcc
|mtd_oobtest: error @addr[0x0:0x1b] 0xe0 -> 0x85 diff 0x65
|mtd_oobtest: error @addr[0x0:0x1c] 0x60 -> 0x62 diff 0x2
|mtd_oobtest: error @addr[0x0:0x1d] 0x69 -> 0x45 diff 0x2c
|mtd_oobtest: error @addr[0x0:0x1e] 0xcd -> 0xa0 diff 0x6d
|mtd_oobtest: error @addr[0x0:0x1f] 0xf2 -> 0x60 diff 0x92
|mtd_oobtest: error: verify failed at 0x0
[...]
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Fixes: a894cf6c5a ("mtd: nand: mxc: switch to mtd_ooblayout_ops")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
When mtk_nfc_do_write_page() comparing the sector number,because the
sector number field is at the 12th-bit position of NFI_BYTELEN
register,the masked register should be shifted 12 bits before being
compared.The result of this bug may cause the second subpage has
incomplete ECC parity bytes.
Signed-off-by: RogerCC Lin <rogercc.lin@mediatek.com>
Fixes: 1d6b1e4649 ("mtd: mediatek: driver for MTK Smart Device")
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
When mtk_ecc_encode() is writing the ECC parity data to the OOB
region,because each register is 4 bytes in length,but the len's unit is
in bytes,the operation in the for loop will cross the ECC's boundary.
Signed-off-by: RogerCC Lin <rogercc.lin@mediatek.com>
Fixes: 1d6b1e4649 ("mtd: mediatek: driver for MTK Smart Device")
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Similar to struct drm_update_draw, struct drm_mode_fb_cmd2 has an
unaligned 64 bit field (modifier). This get packed differently between
32 bit and 64 bit modes on architectures that can handle unaligned 64
bit access (X86 and IA64). Other architectures pack the structs the
same and don't need the compat wrapper. Use the same condition for
drm_mode_fb_cmd2 as we use for drm_update_draw.
Note that only the modifier will be packed differently between compat
and non-compat versions.
Reviewed-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org>
[seanpaul added not at bottom of commit msg re: modifier]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1473801645-116011-1-git-send-email-hoegsberg@chromium.org
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Just fixup to runtime pm usage and some cleanups.
* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
Subject: [PATCH, RESEND] drm: exynos: avoid unused function warning
drm/exynos: g2d: fix system and runtime pm integration
drm/exynos: rotator: fix system and runtime pm integration
drm/exynos: gsc: fix system and runtime pm integration
drm/exynos: fimc: fix system and runtime pm integration
exynos-drm: Fix unsupported GEM memory type error message to be clear
Johannes Berg says:
====================
Two more fixes:
* reject aggregation sessions for TSID/TID 8-16 that we
can never use anyway and which could confuse drivers
* check return value of skb_linearize()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
MAC devices use the RWKPKTEN and MGKPKTEN bits of the PMT Control/Status
register to generate power management events.
So this patch is to properly set the RWKPKTEN [BIT(2)] inside the
PMT register (needed in case of global unicast).
Reported-by: Aditi SHARMA <aditi-hed.sharma@st.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When CONFIG_PM is not set, we get a warning about an unused function:
drivers/gpu/drm/exynos/exynos_drm_gsc.c:1219:12: error: 'gsc_clk_ctrl' defined but not used [-Werror=unused-function]
static int gsc_clk_ctrl(struct gsc_context *ctx, bool enable)
^~~~~~~~~~~~
This removes the two #ifdef checks in this file and instead marks the
functions as __maybe_unused, which is a more reliable way of doing the
same, allowing better build coverage and avoiding the warning above.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Pull USB fixes from Greg KH:
"Here are two small fixes, and one new device id, for 4.8-rc7
The fixes solve a build error that was reported in your tree for the
blackfin arch, and resolve an issue with a number of broken USB
devices that reported the wrong interval rate. Included here is also
a new device id for the usb-serial driver.
All have been in linux-next with no reported issues"
* tag 'usb-4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: change bInterval default to 10 ms
usb: musb: Fix tusb6010 compile error on blackfin
USB: serial: simple: add support for another Infineon flashloader
Pull uaccess fixes from Guenter Roeck:
"Two patches fixing problems introduced with copy_from_user changes"
* tag 'fixes-for-linus-v4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
openrisc: fix the fix of copy_from_user()
avr32: fix 'undefined reference to `___copy_from_user'
Pull perf fixes from Thomas Gleixner:
"A couple of small fixes to x86 perf drivers:
- Measure L2 for HW_CACHE* events on AMD
- Fix the address filter handling in the intel/pt driver
- Handle the BTS disabling at the proper place"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/amd: Make HW_CACHE_REFERENCES and HW_CACHE_MISSES measure L2
perf/x86/intel/pt: Do validate the size of a kernel address filter
perf/x86/intel/pt: Fix kernel address filter's offset validation
perf/x86/intel/pt: Fix an off-by-one in address filter configuration
perf/x86/intel: Don't disable "intel_bts" around "intel" event batching
Pull SMP build fixlet from Thomas Gleixner:
"Add a missing include in cpuhotplug.h"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Include linux/types.h in linux/cpuhotplug.h
Pull irq fixes from Thomas Gleixner:
"Two patches from Boris which address a potential deadlock in the atmel
irq chip driver"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/atmel-aic: Fix potential deadlock in ->xlate()
genirq: Provide irq_gc_{lock_irqsave,unlock_irqrestore}() helpers
Since commit acb2505d01 ("openrisc: fix copy_from_user()"),
copy_from_user() returns the number of bytes requested, not the
number of bytes not copied.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Fixes: acb2505d01 ("openrisc: fix copy_from_user()")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
avr32 builds fail with:
arch/avr32/kernel/built-in.o: In function `arch_ptrace':
(.text+0x650): undefined reference to `___copy_from_user'
arch/avr32/kernel/built-in.o:(___ksymtab+___copy_from_user+0x0): undefined
reference to `___copy_from_user'
kernel/built-in.o: In function `proc_doulongvec_ms_jiffies_minmax':
(.text+0x5dd8): undefined reference to `___copy_from_user'
kernel/built-in.o: In function `proc_dointvec_minmax_sysadmin':
sysctl.c:(.text+0x6174): undefined reference to `___copy_from_user'
kernel/built-in.o: In function `ptrace_has_cap':
ptrace.c:(.text+0x69c0): undefined reference to `___copy_from_user'
kernel/built-in.o:ptrace.c:(.text+0x6b90): more undefined references to
`___copy_from_user' follow
Fixes: 8630c32275 ("avr32: fix copy_from_user()")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Havard Skinnemoen <hskinnemoen@gmail.com>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Move code from system sleep pm to runtime pm callbacks to ensure proper
driver state preservation when device is under power domain. Then, use
generic helpers for using runtime pm for system sleep pm.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Use generic helpers instead of open-coding usage of runtime pm for system
sleep pm, which was potentially broken for some corner cases.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Use generic helpers instead of open-coding usage of runtime pm for system
sleep pm, which was potentially broken for some corner cases.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Use generic helpers instead of open-coding usage of runtime pm for system
sleep pm, which was potentially broken for some corner cases.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Fix unsupported GEM memory type error message to include the memory type
information.
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Pull MMC fixes from Ulf Hansson:
"MMC host:
- omap/omap_hsmmc: Initialize dma_slave_config to avoid random data
- sdhci-st: Handle interconnect clock"
* tag 'mmc-v4.8-rc6' of git://git.linaro.org/people/ulf.hansson/mmc:
mmc: omap: Initialize dma_slave_config to avoid random data in it's fields
mmc: omap_hsmmc: Initialize dma_slave_config to avoid random data
mmc: sdhci-st: Handle interconnect clock
dt-bindings: mmc: sdhci-st: Mention the discretionary "icn" clock
Pull powerpc fixes from Michael Ellerman:
"Fixes for code merged this cycle:
- Fix restore of SPRs upon wake up from hypervisor state loss from
Gautham R Shenoy
- Fix the state of root PE from Gavin Shan
- Detach from PE on releasing PCI device from Gavin Shan
- Fix size of NUM_CPU_FTR_KEYS on 32-bit
- Fix missed TCE invalidations that should fallback to OPAL"
* tag 'powerpc-4.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/powernv/pci: Fix missed TCE invalidations that should fallback to OPAL
powerpc/powernv: Detach from PE on releasing PCI device
powerpc/powernv: Fix the state of root PE
powerpc/kernel: Fix size of NUM_CPU_FTR_KEYS on 32-bit
powerpc/powernv: Fix restore of SPRs upon wake up from hypervisor state loss
Commit 6e7333d "net: add rx_nohandler stat counter" added the new entry
rx_nohandler into struct rtnl_link_stats64. Unfortunately the bna
driver foolishly depends on the structure. It uses part of it for
ethtool statistics and it's not bad but the driver assumes its size
is constant as it defines string for each existing entry. The problem
occurs when the structure is extended because you need to modify bna
driver as well. If not any attempt to retrieve ethtool statistics results
in crash in bnad_get_strings().
The patch changes BNAD_ETHTOOL_STATS_NUM so it counts real number of
strings in the array and also removes rtnl_link_stats64 entries that
are not used in output and are always zero.
Fixes: 6e7333d "net: add rx_nohandler stat counter"
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit ba5ca784 "bna: check for dma mapping errors" added besides other
things a statistic that counts number of DMA buffer mapping failures
per each Rx queue. This counter is not included in ethtool stats output.
Fixes: ba5ca784 "bna: check for dma mapping errors"
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This function actually operates on u32 yet its paramteres were declared
as u16, causing integer truncation upon calling.
Note in patch context that ADDIP_SERIAL_SIGN_BIT is already 32 bits.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
skb is not freed if newsk is NULL. Rework the error path so free_skb is
unconditionally called on function exit.
Fixes: c3ea9fa274 ("[IrDA] af_irda: IRDA_ASSERT cleanups")
Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A malicious TCP receiver, sending SACK, can force the sender to split
skbs in write queue and increase its memory usage.
Then, when socket is closed and its write queue purged, we might
overflow sk_forward_alloc (It becomes negative)
sk_mem_reclaim() does nothing in this case, and more than 2GB
are leaked from TCP perspective (tcp_memory_allocated is not changed)
Then warnings trigger from inet_sock_destruct() and
sk_stream_kill_queues() seeing a not zero sk_forward_alloc
All TCP stack can be stuck because TCP is under memory pressure.
A simple fix is to preemptively reclaim from sk_mem_uncharge().
This makes sure a socket wont have more than 2 MB forward allocated,
after burst and idle period.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If a TCP socket gets a large write queue, an overflow can happen
in a test in __tcp_retransmit_skb() preventing all retransmits.
The flow then stalls and resets after timeouts.
Tested:
sysctl -w net.core.wmem_max=1000000000
netperf -H dest -- -s 1000000000
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case of error during netback_probe() (e.g. an entry missing on the
xenstore) netback_remove() is called on the new device, which will set
the device backend state to XenbusStateClosed by calling
set_backend_state(). However, the backend state wasn't initialized by
netback_probe() at this point, which will cause and invalid transaction
and set_backend_state() to BUG().
Initialize the backend state at the beginning of netback_probe() to
XenbusStateInitialising, and create two new valid state transitions on
set_backend_state(), from XenbusStateInitialising to XenbusStateClosed,
and from XenbusStateInitialising to XenbusStateInitWait.
Signed-off-by: Filipe Manco <filipe.manco@neclab.eu>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull cifs fixes from Steve French:
"Small set of cifs fixes"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
Move check for prefix path to within cifs_get_root()
Compare prepaths when comparing superblocks
Fix memory leaks in cifs_do_mount()
Pull nfsd bugfix from Bruce Fields:
"Fix a memory corruption bug that I introduced in 4.7"
* tag 'nfsd-4.8-2' of git://linux-nfs.org/~bfields/linux:
svcauth_gss: Revert 64c59a3726 ("Remove unnecessary allocation")
Pull drm fixes from Dave Airlie:
"Two sets of i915 fixes, one set of vc4 crasher fixes, and a couple of
atmel fixes.
Nothing too out there at this stage, though I think some people are
holidaying so it's been quiet enough"
* tag 'drm-fixes-for-4.8-rc6' of git://people.freedesktop.org/~airlied/linux:
drm/i915: Ignore OpRegion panel type except on select machines
Revert "drm/i915/psr: Make idle_frames sensible again"
drm/i915: Restore lost "Initialized i915" welcome message
drm/vc4: mark vc4_bo_cache_purge() static
drm/i915: Add GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE to SNB
drm/i915: disable 48bit full PPGTT when vGPU is active
drm/i915: enable vGPU detection for all
drm/atmel-hlcdc: Make ->reset() implementation static
drm: atmel-hlcdc: Fix vertical scaling
drm/vc4: Allow some more signals to be packed with uniform resets.
drm/i915/dvo: Remove dangling call to drm_encoder_cleanup()
Pull power management fix from Rafael Wysocki:
"More annotations of tracepoints in the runtime PM framework to prevent
RCU from complaining when that code is invoked from the idle path
(Paul McKenney)"
* tag 'pm-4.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / runtime: Use _rcuidle for runtime suspend tracepoints
This pull request brings in a fix for crashes in X on VC4.
* tag 'drm-vc4-fixes-2016-09-14' of https://github.com/anholt/linux:
drm/vc4: mark vc4_bo_cache_purge() static
drm/vc4: Allow some more signals to be packed with uniform resets.
i915 fixes from Jani.
* tag 'drm-intel-fixes-2016-09-15' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Ignore OpRegion panel type except on select machines
Revert "drm/i915/psr: Make idle_frames sensible again"
drm/i915: Restore lost "Initialized i915" welcome message
Pull rdma fixes from Doug Ledford:
"Round three of 4.8 rc fixes.
This is likely the last rdma pull request this cycle. The new rxe
driver had a few issues (you probably saw the boot bot bug report) and
they should be addressed now. There are a couple other fixes here,
mainly mlx4. There are still two outstanding issues that need
resolved but I don't think their fix will make this kernel cycle.
Summary:
- Various fixes to rdmavt, ipoib, mlx5, mlx4, rxe"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/rdmavt: Don't vfree a kzalloc'ed memory region
IB/rxe: Fix kmem_cache leak
IB/rxe: Fix race condition between requester and completer
IB/rxe: Fix duplicate atomic request handling
IB/rxe: Fix kernel panic in udp_setup_tunnel
IB/mlx5: Set source mac address in FTE
IB/mlx5: Enable MAD_IFC commands for IB ports only
IB/mlx4: Diagnostic HW counters are not supported in slave mode
IB/mlx4: Use correct subnet-prefix in QP1 mads under SR-IOV
IB/mlx4: Fix code indentation in QP1 MAD flow
IB/mlx4: Fix incorrect MC join state bit-masking on SR-IOV
IB/ipoib: Don't allow MC joins during light MC flush
IB/rxe: fix GFP_KERNEL in spinlock context
Pull ARM SoC fixes from Arnd Bergmann:
"Here are a couple of bugfixes for v4.8-rc.
Most of them have actually been around for a while this time but for
some reason didn't get applied early on. The shmobile regulator fix
is the only one that isn't completely obvious.
Device tree changes:
- archtimer interrupts must be level triggered (multiple platforms)
- fix for USB and MMC clocks on STiH410
- fix split DT repository in case of raspberry-pi 3
- a new use of skeleton.dtsi on arm64 has crept in after that was
removed.
defconfig updates:
- xilinx vdma has a new Kconfig symbol name
- keystone requires CONFIG_NOP_USB_XCEIV since v4.8-rc1
Code fixes:
- fix regulator quirk on shmobile
- suspend-to-ram regression on EXYNOS
Maintainer updates:
- Javier Martinez Canillas is now a reviewer for Samsung EXYNOS"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: keystone: defconfig: Fix USB configuration
arm64: dts: Fix broken architected timer interrupt trigger
ARM: multi_v7_defconfig: update XILINX_VDMA
ARM64: dts: bcm: Use a symlink to R-Pi dtsi files from arch=arm
ARM: dts: Remove use of skeleton.dtsi from bcm283x.dtsi
ARM: dts: STiH407-family: Provide interconnect clock for consumption in ST SDHCI
ARM: dts: STiH410: Handle interconnect clock required by EHCI/OHCI (USB)
ARM: shmobile: fix regulator quirk for Gen2
ARM: EXYNOS: Clear OF_POPULATED flag from PMU node in IRQ init callback
MAINTAINERS: Add myself as reviewer for Samsung Exynos support
Pull ARM fixes from Russell King:
"Most of this update are fixes primarily discovered from testing on the
older StrongARM 1110 and PXA systems, as a result of recent interest
from several people in these platforms:
- Locomo interrupt handling incorrectly stores the handler data in
the chip's private data slot: when Locomo is combined with an
interrupt controller who's chip uses the chip private data, this
leads to an oops.
- SA1111 was missing a call to clk_disable() to clean up after a
failed probe.
- SA1111 and PCMCIA suspend/resume was broken:
The PCMCIA "ds" layer was using the legacy bus suspend/resume
methods, which the core PM code is no longer calling as a result of
device_pm_check_callbacks() introduced in commit aa8e54b559
("PM / sleep: Go direct_complete if driver has no callbacks").
SA1111 was broken due to changes to PCMCIA which makes PCMCIA
suspend itself later than the SA1111 code expects, and resume
before the SA1111 code has initialised access to the pcmcia
sub-device.
- the default SA1111 interrupt mask polarity got messed up when it
was converted to use a dynamic interrupt base number for its
interrupts.
- fix platform_get_irq() error code propagation, which was causing
problems on platforms where the interrupt may not be available at
probe time in DT setups.
- fix the lack of clock to PCMCIA code on PXA platforms, which was
omitted in conversions of PXA to CCF.
- fix an oops in the PXA PCMCIA code caused by a previous commit not
realising that Lubbock is different from the rest of the PXA PCMCIA
drivers.
- ensure that SA1111 low-level PCMCIA drivers propagate their error
codes to the main probe function, rather than the driver silently
accepting a failure.
- fix the sa11xx debugfs reporting of timing information, which
always indicated zero due to the clock being a factor of 1000 out.
- fix the polarity of the status change signal reported from the
sockets.
Lastly, one ARM specific commit from Stefan Agner fixing the LPAE
cache attributes"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: pxa/lubbock: add pcmcia clock
ARM: locomo: fix locomo irq handling
ARM: 8612/1: LPAE: initialize cache policy correctly
ARM: sa1111: fix missing clk_disable()
ARM: sa1111: fix pcmcia suspend/resume
ARM: sa1111: fix pcmcia interrupt mask polarity
ARM: sa1111: fix error code propagation in sa1111_probe()
pcmcia: lubbock: fix sockets configuration
pcmcia: sa1111: fix propagation of lowlevel board init return code
pcmcia: soc_common: fix SS_STSCHG polarity
pcmcia: sa11xx_base: add units to the timing information
pcmcia: sa11xx_base: fix reporting of timing information
pcmcia: ds: fix suspend/resume
The userspace memory region 'mr' is allocated with kzalloc in
__rvt_alloc_mr however it is incorrectly being freed with vfree in
__rvt_free_mr. Fix this by using kfree to free it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
rxe_requester() is sending a pkt with rxe_xmit_packet() and
then calls rxe_update() to update the wqe and qp's psn values.
But sometimes the response is received before the requester
had time to update the wqe in which case the completer
acts on errornous wqe values.
This fix updates the wqe and qp before actually sending
the request and rolls back when xmit fails.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When handling ack for atomic opcodes like "fetch&add"
or "cmp&swp", the method send_atomic_ack() saves the ack
before sending it, in case it gets lost and never reach the
requester. In which case the method duplicate_request()
will need to find it using the duplicated request.psn.
But send_atomic_ack() used a wrong psn value and thus
the above ack was never found.
This fix uses the ack.psn to locate the ack in case
its needed.
This fix also copies the ack packet to the skb's control buffer
since duplicate_request() will need it when calling rxe_xmit_packet()
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Set the source mac address in the FTE when L2 specification
is provided.
Fixes: 038d2ef875 ('IB/mlx5: Add flow steering support')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
MAD_IFC command is supported only for physical functions (PF)
and when physical port is IB. The proposed fix enforces it.
Fixes: d603c809ef ("IB/mlx5: Fix decision on using MAD_IFC")
Reported-by: David Chang <dchang@suse.com>
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Modify the mlx4_ib_diag_counters() to avoid the following error in the
hypervisor when the slave tries to query the hardware counters in SR-IOV
mode.
mlx4_core 0000:81:00.0: Unknown command:0x30 accepted from slave:1
Fixes: 3f85f2aaab ("IB/mlx4: Add diagnostic hardware counters")
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When sending QP1 MAD packets which use a GRH, the source GID
(which consists of the 64-bit subnet prefix, and the 64 bit port GUID)
must be included in the packet GRH.
For SR-IOV, a GID cache is used, since the source GID needs to be the
slave's source GID, and not the Hypervisor's GID. This cache also
included a subnet_prefix. Unfortunately, the subnet_prefix field in
the cache was never initialized (to the default subnet prefix 0xfe80::0).
As a result, this field remained all zeroes. Therefore, when SR-IOV
was active, all QP1 packets which included a GRH had a source GID
subnet prefix of all-zeroes.
However, the subnet-prefix should initially be 0xfe80::0 (the default
subnet prefix). In addition, if OpenSM modifies a port's subnet prefix,
the new subnet prefix must be used in the GRH when sending QP1 packets.
To fix this we now initialize the subnet prefix in the SR-IOV GID cache
to the default subnet prefix. We update the cached value if/when OpenSM
modifies the port's subnet prefix. We take this cached value when sending
QP1 packets when SR-IOV is active.
Note that the value is stored as an atomic64. This eliminates any need
for locking when the subnet prefix is being updated.
Note also that we depend on the FW generating the "port management change"
event for tracking subnet-prefix changes performed by OpenSM. If running
early FW (before 2.9.4630), subnet prefix changes will not be tracked (but
the default subnet prefix still will be stored in the cache; therefore
users who do not modify the subnet prefix will not have a problem).
IF there is a need for such tracking also for early FW, we will add that
capability in a subsequent patch.
Fixes: 1ffeb2eb8b ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The indentation in the QP1 GRH flow in procedure build_mlx_header is
really confusing. Fix it, in preparation for a commit which touches
this code.
Fixes: 1ffeb2eb8b ("IB/mlx4: SR-IOV IB context objects and proxy/tunnel SQP support")
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Because of an incorrect bit-masking done on the join state bits, when
handling a join request we failed to detect a difference between the
group join state and the request join state when joining as send only
full member (0x8). This caused the MC join request not to be sent.
This issue is relevant only when SRIOV is enabled and SM supports
send only full member.
This fix separates scope bits and join states bits a nibble each.
Fixes: b9c5d6a643 ('IB/mlx4: Add multicast group (MCG) paravirtualization for SR-IOV')
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This fix solves a race between light flush and on the fly joins.
Light flush doesn't set the device to down and unset IPOIB_OPER_UP
flag, this means that if while flushing we have a MC join in progress
and the QP was attached to BC MGID we can have a mismatches when
re-attaching a QP to the BC MGID.
The light flush would set the broadcast group to NULL causing an on
the fly join to rejoin and reattach to the BC MCG as well as adding
the BC MGID to the multicast list. The flush process would later on
remove the BC MGID and detach it from the QP. On the next flush
the BC MGID is present in the multicast list but not found when trying
to detach it because of the previous double attach and single detach.
[18332.714265] ------------[ cut here ]------------
[18332.717775] WARNING: CPU: 6 PID: 3767 at drivers/infiniband/core/verbs.c:280 ib_dealloc_pd+0xff/0x120 [ib_core]
...
[18332.775198] Hardware name: Red Hat KVM, BIOS Bochs 01/01/2011
[18332.779411] 0000000000000000 ffff8800b50dfbb0 ffffffff813fed47 0000000000000000
[18332.784960] 0000000000000000 ffff8800b50dfbf0 ffffffff8109add1 0000011832f58300
[18332.790547] ffff880226a596c0 ffff880032482000 ffff880032482830 ffff880226a59280
[18332.796199] Call Trace:
[18332.798015] [<ffffffff813fed47>] dump_stack+0x63/0x8c
[18332.801831] [<ffffffff8109add1>] __warn+0xd1/0xf0
[18332.805403] [<ffffffff8109aebd>] warn_slowpath_null+0x1d/0x20
[18332.809706] [<ffffffffa025d90f>] ib_dealloc_pd+0xff/0x120 [ib_core]
[18332.814384] [<ffffffffa04f3d7c>] ipoib_transport_dev_cleanup+0xfc/0x1d0 [ib_ipoib]
[18332.820031] [<ffffffffa04ed648>] ipoib_ib_dev_cleanup+0x98/0x110 [ib_ipoib]
[18332.825220] [<ffffffffa04e62c8>] ipoib_dev_cleanup+0x2d8/0x550 [ib_ipoib]
[18332.830290] [<ffffffffa04e656f>] ipoib_uninit+0x2f/0x40 [ib_ipoib]
[18332.834911] [<ffffffff81772a8a>] rollback_registered_many+0x1aa/0x2c0
[18332.839741] [<ffffffff81772bd1>] rollback_registered+0x31/0x40
[18332.844091] [<ffffffff81773b18>] unregister_netdevice_queue+0x48/0x80
[18332.848880] [<ffffffffa04f489b>] ipoib_vlan_delete+0x1fb/0x290 [ib_ipoib]
[18332.853848] [<ffffffffa04df1cd>] delete_child+0x7d/0xf0 [ib_ipoib]
[18332.858474] [<ffffffff81520c08>] dev_attr_store+0x18/0x30
[18332.862510] [<ffffffff8127fe4a>] sysfs_kf_write+0x3a/0x50
[18332.866349] [<ffffffff8127f4e0>] kernfs_fop_write+0x120/0x170
[18332.870471] [<ffffffff81207198>] __vfs_write+0x28/0xe0
[18332.874152] [<ffffffff810e09bf>] ? percpu_down_read+0x1f/0x50
[18332.878274] [<ffffffff81208062>] vfs_write+0xa2/0x1a0
[18332.881896] [<ffffffff812093a6>] SyS_write+0x46/0xa0
[18332.885632] [<ffffffff810039b7>] do_syscall_64+0x57/0xb0
[18332.889709] [<ffffffff81883321>] entry_SYSCALL64_slow_path+0x25/0x25
[18332.894727] ---[ end trace 09ebbe31f831ef17 ]---
Fixes: ee1e2c82c2 ("IPoIB: Refresh paths instead of flushing them on SM change events")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There is skb_clone(skb, GFP_KERNEL) in spinlock context
in rxe_rcv_mcast_pkt().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Fixes the following sparse warning:
kernel/cpuset.c:2088:6: warning:
symbol 'cpuset_fork' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull "ARM: exynos: Fixes for v4.8, secound round" from Krzysztof Kozłowski:
1. A recent change in populating irqchip devices from Device Tree
broke Suspend to RAM on Exynos boards due to lack of probing of
PMU (Power Management Unit) driver. Multiple drivers attach to
the PMU's DT node: irqchip, clock controller and PMU platform
driver for handling suspend. The new irqchip code marked the
PMU's DT node as OF_POPULATED but we need to attach to this
node also PMU platform driver.
2. Add Javier as additional reviewer for Exynos patches.
* tag 'samsung-fixes-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: EXYNOS: Clear OF_POPULATED flag from PMU node in IRQ init callback
MAINTAINERS: Add myself as reviewer for Samsung Exynos support
Some full-speed mceusb infrared transceivers contain invalid endpoint
descriptors for their interrupt endpoints, with bInterval set to 0.
In the past they have worked out okay with the mceusb driver, because
the driver sets the bInterval field in the descriptor to 1,
overwriting whatever value may have been there before. However, this
approach was never sanctioned by the USB core, and in fact it does not
work with xHCI controllers, because they use the bInterval value that
was present when the configuration was installed.
Currently usbcore uses 32 ms as the default interval if the value in
the endpoint descriptor is invalid. It turns out that these IR
transceivers don't work properly unless the interval is set to 10 ms
or below. To work around this mceusb problem, this patch changes the
endpoint-descriptor parsing routine, making the default interval value
be 10 ms rather than 32 ms.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Tested-by: Wade Berrier <wberrier@gmail.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have CONFIG_BLACKFIN ifdef redefining all musb registers in
musb_regs.h and tusb6010.h is never included causing a build
error with blackfin-allmodconfig and COMPILE_TEST.
Let's fix the issue by not building tusb6010 if CONFIG_BLACKFIN
is selected.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While the Intel PMU monitors the LLC when perf enables the
HW_CACHE_REFERENCES and HW_CACHE_MISSES events, these events monitor
L1 instruction cache fetches (0x0080) and instruction cache misses
(0x0081) on the AMD PMU.
This is extremely confusing when monitoring the same workload across
Intel and AMD machines, since parameters like,
$ perf stat -e cache-references,cache-misses
measure completely different things.
Instead, make the AMD PMU measure instruction/data cache and TLB fill
requests to the L2 and instruction/data cache and TLB misses in the L2
when HW_CACHE_REFERENCES and HW_CACHE_MISSES are enabled,
respectively. That way the events measure unified caches on both
platforms.
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1472044328-21302-1-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The check for writing more than cb_max_size bytes does not 'goto out' so
it is a no-op which allows users to vmalloc an arbitrary amount.
Fixes: 03607ace80 ("configfs: implement binary attributes")
Cc: stable@kernel.org
Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Ursula Braun says:
====================
390: qeth patches
here are several fixes for the s390 qeth driver, built for net.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 5f78e29cee ("qeth: optimize IP handling in rx_mode callback")
restructured the internal address handling.
This work broke setting a virtual IP address.
The command
echo 10.1.1.1 > /sys/bus/ccwgroup/devices/<device>/vipa/add4
fails with file exist error even if the IP address has not
been set before.
It turned out that the search result for the IP address
search is handled incorrectly in the VIPA case.
This patch fixes the setting of an virtual IP address.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
According to recent performance measurements, turning on net_device
feature NETIF_F_SG only behaves well, but turning on feature
NETIF_F_GSO shows bad results. Since the kernel activates NETIF_F_GSO
automatically as soon as the driver configures feature NETIF_F_SG, qeth
should not activate feature NETIF_F_SG per default, until the qeth
problems with NETIF_F_GSO are solved.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To reduce the need of skb_linearize() calls, gso_max_segs of qeth
net_devices had been limited according to the maximum number of qdio SBAL
elements. But a gso segment cannot be larger than the mtu-size, while an
SBAL element can contain up to 4096 bytes. The gso_max_segs limitation
limits the maximum packet size given to the qeth driver. Performance
measurements with tso-enabled qeth network interfaces and mtu-size 1500
showed, that the disadvantage of smaller packets is much more severe than
the advantage of fewer skb_linearize() calls.
This patch gets rid of the gso_max_segs limitations in the qeth driver.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The qeth IP address mapping logic has been reworked recently. It
causes now problems to specify qeth sysfs attribute "hsuid" in DOWN
state, which is allowed. Postpone registering or deregistering of
IP-addresses in this case.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qeth_l3_dev_hsuid_store() changes the ip hash table, which
requires the ip_lock.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After device recovery, only a basic set of network device features is
enabled on the device. If features like checksum offloading or TSO were
enabled by the user before the recovery, this results in a mismatch
between the network device features, that the kernel assumes to be
enabled on the device, and the features actually enabled on the device.
This patch tries to restore previously set features, that require
changes on the device, after the recovery of a device. In case of an
error, the network device's features are changed to contain only the
features that are actually turned on.
Signed-off-by: Hans Wippel <hwippel@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 73725d9dfd ("nfp: allocate ring SW structs dynamically")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The function ip_rcv_finish() calls l3mdev_ip_rcv(). On any VRF except
the global VRF, this replaces skb->dev with the VRF master interface.
When calling ip_route_input_noref() from here, the checks for forwarding
look at this master device instead of the initial ingress interface.
This will allow packets to be routed which normally would be dropped.
For example, an interface that is not assigned an IP address should
drop packets, but because the checking is against the master device, the
packet will be forwarded.
The fix here is to still call l3mdev_ip_rcv(), but remember the initial
net_device. This is passed to the other functions within ip_rcv_finish,
so they still see the original interface.
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
for preventing race conditions within ioctl calls.
Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
add realization for mac address set and remove dummy callback.
Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The device table is required to load modules based on
modaliases. After adding MODULE_DEVICE_TABLE, below entries
for example will be added to modules.alias:
alias of:N*T*Cmediatek,mt7623-ethC* mtk_eth_soc
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Wunderlich says:
====================
Here are two batman-adv bugfix patches:
- Fix reference counting for last_bonding_candidate, by Sven Eckelmann
- Fix head room reservation for ELP packets, by Linus Luessing
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If an error occurs in mlx4_init_eq_table the index used in the
err_out_unmap label is one too big which results in a panic in
mlx4_free_eq. This patch fixes the index in the error path.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg says:
====================
A few more fixes:
* better mesh path fixing, from Thomas
* fix TIM IE recalculation after sending frames
to a sleeping station, from Felix
* fix sequence number assignment while sending
frames to a sleeping station, also from Felix
* validate number of probe response CSA counter
offsets, fixing a copy/paste bug (from myself)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Further testing with false negatives suppressed by commit 293e2421fe
("rcu: Remove superfluous versions of rcu_read_lock_sched_held()")
identified a few more unprotected uses of RCU from the idle loop.
Because RCU actively ignores idle-loop code (for energy-efficiency
reasons, among other things), using RCU from the idle loop can result
in too-short grace periods, in turn resulting in arbitrary misbehavior.
The affected function is rpm_suspend().
The resulting lockdep-RCU splat is as follows:
------------------------------------------------------------------------
Warning from omap3
===============================
[ INFO: suspicious RCU usage. ]
4.6.0-rc5-next-20160426+ #1112 Not tainted
-------------------------------
include/trace/events/rpm.h:63 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
RCU used illegally from idle CPU!
rcu_scheduler_active = 1, debug_locks = 0
RCU used illegally from extended quiescent state!
1 lock held by swapper/0/0:
#0: (&(&dev->power.lock)->rlock){-.-...}, at: [<c052ee24>] __pm_runtime_suspend+0x54/0x84
stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1112
Hardware name: Generic OMAP36xx (Flattened Device Tree)
[<c0110308>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14)
[<c010c3a8>] (show_stack) from [<c047fec8>] (dump_stack+0xb0/0xe4)
[<c047fec8>] (dump_stack) from [<c052d7b4>] (rpm_suspend+0x604/0x7e4)
[<c052d7b4>] (rpm_suspend) from [<c052ee34>] (__pm_runtime_suspend+0x64/0x84)
[<c052ee34>] (__pm_runtime_suspend) from [<c04bf3bc>] (omap2_gpio_prepare_for_idle+0x5c/0x70)
[<c04bf3bc>] (omap2_gpio_prepare_for_idle) from [<c01255e8>] (omap_sram_idle+0x140/0x244)
[<c01255e8>] (omap_sram_idle) from [<c0126b48>] (omap3_enter_idle_bm+0xfc/0x1ec)
[<c0126b48>] (omap3_enter_idle_bm) from [<c0601db8>] (cpuidle_enter_state+0x80/0x3d4)
[<c0601db8>] (cpuidle_enter_state) from [<c0183c74>] (cpu_startup_entry+0x198/0x3a0)
[<c0183c74>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8)
[<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c)
------------------------------------------------------------------------
Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This ensures that do_mmap() won't implicitly make AIO memory mappings
executable if the READ_IMPLIES_EXEC personality flag is set. Such
behavior is problematic because the security_mmap_file LSM hook doesn't
catch this case, potentially permitting an attacker to bypass a W^X
policy enforced by SELinux.
I have tested the patch on my machine.
To test the behavior, compile and run this:
#define _GNU_SOURCE
#include <unistd.h>
#include <sys/personality.h>
#include <linux/aio_abi.h>
#include <err.h>
#include <stdlib.h>
#include <stdio.h>
#include <sys/syscall.h>
int main(void) {
personality(READ_IMPLIES_EXEC);
aio_context_t ctx = 0;
if (syscall(__NR_io_setup, 1, &ctx))
err(1, "io_setup");
char cmd[1000];
sprintf(cmd, "cat /proc/%d/maps | grep -F '/[aio]'",
(int)getpid());
system(cmd);
return 0;
}
In the output, "rw-s" is good, "rwxs" is bad.
Signed-off-by: Jann Horn <jann@thejh.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull kvm fix from Paolo Bonzini:
"One fix for an x86 regression in VM migration, mostly visible with
Windows because it uses RTC periodic interrupts"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: x86: correctly reset dest_map->vector when restoring LAPIC state
Kirill A Shutemov reports that the kernel doesn't try to cap dest_count
in any way, and uses the number to allocate kernel memory. This causes
high order allocation warnings in the kernel log if someone passes in a
big enough value. We should clamp the allocation at PAGE_SIZE to avoid
stressing the VM.
The two existing users of the dedupe ioctl never send more than 120
requests, so we can safely clamp dest_range at PAGE_SIZE, because with
4k pages we can handle up to 127 dedupe candidates. Given the max
extent length of 16MB, we can end up doing 2GB of IO which is plenty.
[ Note: the "offsetof()" can't overflow, because 'count' is just a
16-bit integer. That's not obvious in the limited context of the
patch, so I'm noting it here because it made me go look. - Linus ]
Reported-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All the VFS functions in the dedupe ioctl path return int status, so
the ioctl handler ought to as well.
Found by Coverity, CID 1350952.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull block fixes from Jens Axboe:
"A set of fixes for the current series in the realm of block.
Like the previous pull request, the meat of it are fixes for the nvme
fabrics/target code. Outside of that, just one fix from Gabriel for
not doing a queue suspend if we didn't get the admin queue setup in
the first place"
* 'for-linus' of git://git.kernel.dk/linux-block:
nvme-rdma: add back dependency on CONFIG_BLOCK
nvme-rdma: fix null pointer dereference on req->mr
nvme-rdma: use ib_client API to detect device removal
nvme-rdma: add DELETING queue flag
nvme/quirk: Add a delay before checking device ready for memblaze device
nvme: Don't suspend admin queue that wasn't created
nvme-rdma: destroy nvme queue rdma resources on connect failure
nvme_rdma: keep a ref on the ctrl during delete/flush
iw_cxgb4: block module unload until all ep resources are released
iw_cxgb4: call dev_put() on l2t allocation failure
get_user_ex(x, ptr) should zero x on failure. It's not a lot of a leak
(at most we are leaking uninitialized 64bit value off the kernel stack,
and in a fairly constrained situation, at that), but the fix is trivial,
so...
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
[ This sat in different branch from the uaccess fixes since mid-August ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When userspace sends KVM_SET_LAPIC, KVM schedules a check between
the vCPU's IRR and ISR and the IOAPIC redirection table, in order
to re-establish the IOAPIC's dest_map (the list of CPUs servicing
the real-time clock interrupt with the corresponding vectors).
However, __rtc_irq_eoi_tracking_restore_one was forgetting to
set dest_map->vectors. Because of this, the IOAPIC did not process
the real-time clock interrupt EOI, ioapic->rtc_status.pending_eoi
got stuck at a non-zero value, and further RTC interrupts were
reported to userspace as coalesced.
Fixes: 9e4aabe2bb
Fixes: 4d99ba898d
Cc: stable@vger.kernel.org
Cc: Joerg Roedel <jroedel@suse.de>
Cc: David Gilbert <dgilbert@redhat.com>
Reviewed-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Off-channel action frames (such as ANQP frames) must be sent either on
the AUX queue or on the offchannel queue, otherwise the firmware will
cause a SYSASSERT.
In the current implementation, the queue to be used is correctly set in
the original skb, but this is done after it is copied. Thus the copy
remains with the original, incorrect queue.
Fix this by setting the queue in the original skb before copying it.
Fixes: commit 5c08b0f502 ("iwlwifi: mvm: don't override the rate with the AMSDU len")
Cc: stable@vger.kernel.org # v4.6+
Signed-off-by: Beni Lev <beni.lev@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When resuming from suspend-to-RAM on r8a7795/salvator-x:
dpm_run_callback(): pm_genpd_resume_noirq+0x0/0x90 returns 1
PM: Device fe940000.fdp1 failed to resume noirq: error 1
dpm_run_callback(): pm_genpd_resume_noirq+0x0/0x90 returns 1
PM: Device fe944000.fdp1 failed to resume noirq: error 1
dpm_run_callback(): pm_genpd_resume_noirq+0x0/0x90 returns 1
PM: Device fe948000.fdp1 failed to resume noirq: error 1
According to its documentation, rcar_fcp_enable() returns 0 on success
or a negative error code if an error occurs. Hence
fdp1_pm_runtime_resume() and vsp1_pm_runtime_resume() forward its return
value to their callers.
However, rcar_fcp_enable() forwards the return value of
pm_runtime_get_sync(), which can actually be 1 on success, leading to
the resume failure above.
To fix this, consider only negative values returned by
pm_runtime_get_sync() to be failures.
Fixes: 7b49235e83 ("[media] v4l: Add Renesas R-Car FCP driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Simply enabling CONFIG_KEYSTONE_USB_PHY doesn't work anymore
as it depends on CONFIG_NOP_USB_XCEIV. We need to enable
that as well.
This fixes USB on Keystone boards from v4.8-rc1 onwards.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since mac80211 doesn't currently support TSIDs 8-15 which can
only be used after QoS TSPEC negotiation (and not even after
WMM negotiation), reject attempts to set up aggregation
sessions for them, which might confuse drivers. In mac80211
we do correctly handle that, but the TSIDs should never get
used anyway, and drivers might not be able to handle it.
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In commit f0228c4130 ("powerpc/powernv/pci: Fallback to OPAL for TCE
invalidations"), we added logic to fallback to OPAL for doing TCE
invalidations if we can't do it in Linux.
Ben sent a v2 of the patch, containing these additional call sites, but
I had already applied v1 and didn't notice. So fix them now.
Fixes: f0228c4130 ("powerpc/powernv/pci: Fallback to OPAL for TCE invalidations")
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The PCI hotplug can be part of EEH error recovery. The @pdn and
the device's PE number aren't removed and added afterwords. The
PE number in @pdn should be set to an invalid one. Otherwise, the
PE's device count is decreased on removing devices while failing
to be increased on adding devices. It leads to unbalanced PE's
device count and make normal PCI hotplug path broken.
Fixes: c5f7700bbd ("powerpc/powernv: Dynamically release PE")
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull PCI fixes from Bjorn Helgaas:
"Here are two changes for v4.8. The first fixes a "[Firmware Bug]: reg
0x10: invalid BAR (can't size)" warning on Haswell, and the second
fixes a problem in some new runtime suspend functionality we merged
for v4.8. Summary:
Enumeration:
Mark Haswell Power Control Unit as having non-compliant BARs (Bjorn Helgaas)
Power management:
Fix bridge_d3 update on device removal (Lukas Wunner)"
* tag 'pci-v4.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI: Fix bridge_d3 update on device removal
PCI: Mark Haswell Power Control Unit as having non-compliant BARs
The ARM architected timer specification mandates that the interrupt
associated with each timer is level triggered (which corresponds to
the "counter >= comparator" condition).
A number of DTs are being remarkably creative, declaring the interrupt
to be edge triggered. A quick look at the TRM for the corresponding ARM
CPUs clearly shows that this is wrong, and I've corrected those.
For non-ARM designs (and in the absence of a publicly available TRM),
I've made them active low as well, which can't be completely wrong
as the GIC cannot disinguish between level low and level high.
The respective maintainers are of course welcome to prove me wrong.
While I was at it, I took the liberty to fix a couple of related issue,
such as some spurious affinity bits on ThunderX, and their complete
absence on ls1043a (both of which seem to be related to copy-pasting
from other DTs).
Acked-by: Duc Dang <dhdang@apm.com>
Acked-by: Carlo Caione <carlo@endlessm.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull uaccess fixes from Al Viro:
"Fixes for broken uaccess primitives - mostly lack of proper zeroing
in copy_from_user()/get_user()/__get_user(), but for several
architectures there's more (broken clear_user() on frv and
strncpy_from_user() on hexagon)"
* 'uaccess-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits)
avr32: fix copy_from_user()
microblaze: fix __get_user()
microblaze: fix copy_from_user()
m32r: fix __get_user()
blackfin: fix copy_from_user()
sparc32: fix copy_from_user()
sh: fix copy_from_user()
sh64: failing __get_user() should zero
score: fix copy_from_user() and friends
score: fix __get_user/get_user
s390: get_user() should zero on failure
ppc32: fix copy_from_user()
parisc: fix copy_from_user()
openrisc: fix copy_from_user()
nios2: fix __get_user()
nios2: copy_from_user() should zero the tail of destination
mn10300: copy_from_user() should zero on access_ok() failure...
mn10300: failing __get_user() and get_user() should zero
mips: copy_from_user() must zero the destination on access_ok() failure
ARC: uaccess: get_user to zero out dest in cause of fault
...
Pull xen regression fix from David Vrabel:
"Fix SMP boot in arm guests"
* tag 'for-linus-4.8b-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
arm/xen: fix SMP guests boot
Commit 88e957d6e4 ("xen: introduce xen_vcpu_id mapping") broke SMP
ARM guests on Xen. When FIFO-based event channels are in use (this is
the default), evtchn_fifo_alloc_control_block() is called on
CPU_UP_PREPARE event and this happens before we set up xen_vcpu_id
mapping in xen_starting_cpu. Temporary fix the issue by setting direct
Linux CPU id <-> Xen vCPU id mapping for all possible CPUs at boot. We
don't currently support kexec/kdump on Xen/ARM so these ids always
match.
In future, we have several ways to solve the issue, e.g.:
- Eliminate all hypercalls from CPU_UP_PREPARE, do them from the
starting CPU. This can probably be done for both x86 and ARM and, if
done, will allow us to get Xen's idea of vCPU id from CPUID/MPIDR on
the starting CPU directly, no messing with ACPI/device tree
required.
- Save vCPU id information from ACPI/device tree on ARM and use it to
initialize xen_vcpu_id mapping. This is the same trick we currently
do on x86.
Reported-by: Julien Grall <julien.grall@arm.com>
Tested-by: Wei Chen <Wei.Chen@arm.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
It is wrong to use uninitialized dma_slave_config and configure only
certain fields as the DMAengine driver might look at non initialized
(random data) fields and tries to interpret it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
It is wrong to use uninitialized dma_slave_config and configure only
certain fields as the DMAengine driver might look at non initialized
(random data) fields and tries to interpret it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The A-MSDU TX code (within TXQs) didn't always check the return value
of skb_linearize() properly, resulting in potentially passing a frag-
list SKB down to the driver even when it said it can't handle it. Fix
that.
Fixes: 6e0456b545 ("mac80211: add A-MSDU tx support")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The PE for root bus (root PE) can be removed because of PCI hot
remove in EEH recovery path for fenced PHB error. We need update
@phb->root_pe_populated accordingly so that the root PE can be
populated again in forthcoming PCI hot add path. Also, the PE
shouldn't be destroyed as it's global and reserved resource.
Fixes: c5f7700bbd ("powerpc/powernv: Dynamically release PE")
Reported-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
really ugly, but apparently avr32 compilers turns access_ok() into
something so bad that they want it in assembler. Left that way,
zeroing added in inline wrapper.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
It could be done in exception-handling bits in __get_user_b() et.al.,
but the surgery involved would take more knowledge of sh64 details
than I have or _want_ to have.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... that should zero on faults. Also remove the <censored> helpful
logics wrt range truncation copied from ppc32. Where it had ever
been needed only in case of copy_from_user() *and* had not been merged
into the mainline until a month after the need had disappeared.
A decade before openrisc went into mainline, I might add...
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* copy_from_user() on access_ok() failure ought to zero the destination
* none of those primitives should skip the access_ok() check in case of
small constant size.
Cc: stable@vger.kernel.org
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Starting with v4.8, we allow a PCIe port to runtime suspend to D3hot if the
port itself and its children satisfy a number of conditions. Once a child
is removed, we recheck those conditions in case the removed device was
blocking the port from suspending.
The rechecking needs to happen *after* the device has been removed from the
bus it resides on. Otherwise when walking the port's subordinate bus in
pci_bridge_d3_update(), the device being removed would erroneously still be
taken into account.
However the device is removed from the bus_list in pci_destroy_dev() and we
currently recheck *before* that. Fix it.
Fixes: 9d26d3a8f1 ("PCI: Put PCIe ports into D3 during suspend")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Rafael J. Wysocki <mika.westerberg@linux.intel.com>
Pull x86 fixes from Ingo Molnar:
"Three fixes:
- AMD microcode loading fix with randomization
- an lguest tooling fix
- and an APIC enumeration boundary condition fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Fix num_processors value in case of failure
tools/lguest: Don't bork the terminal in case of wrong args
x86/microcode/AMD: Fix load of builtin microcode with randomized memory
Pull scheduler fix from Ingo Molnar:
"A try_to_wake_up() memory ordering race fix causing a busy-loop in
ttwu()"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/core: Fix a race between try_to_wake_up() and a woken up task
Pull perf fixes from Ingo Molnar:
"This contains:
- a set of fixes found by directed-random perf fuzzing efforts by
Vince Weaver, Alexander Shishkin and Peter Zijlstra
- a cqm driver crash fix
- an AMD uncore driver use after free fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix PEBSv3 record drain
perf/x86/intel/bts: Kill a silly warning
perf/x86/intel/bts: Fix BTS PMI detection
perf/x86/intel/bts: Fix confused ordering of PMU callbacks
perf/core: Fix aux_mmap_count vs aux_refcount order
perf/core: Fix a race between mmap_close() and set_output() of AUX events
perf/x86/amd/uncore: Prevent use after free
perf/x86/intel/cqm: Check cqm/mbm enabled state in event init
perf/core: Remove WARN from perf_event_read()
Pull locking fix from Ingo Molnar:
"Another lockless_dereference() Sparse fix"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/barriers: Don't use sizeof(void) in lockless_dereference()
Pull EFI fixes from Ingo Molnar:
"This contains a Xen fix, an arm64 fix and a race condition /
robustization set of fixes related to ExitBootServices() usage and
boundary conditions"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/efi: Use efi_exit_boot_services()
efi/libstub: Use efi_exit_boot_services() in FDT
efi/libstub: Introduce ExitBootServices helper
efi/libstub: Allocate headspace in efi_get_memory_map()
efi: Fix handling error value in fdt_find_uefi_params
efi: Make for_each_efi_memory_desc_in_map() cope with running on Xen
Pull MD fixes from Shaohua Li:
"A few bug fixes for MD:
- Guoqing fixed a bug compiling md-cluster in kernel
- I fixed a potential deadlock in raid5-cache superblock write, a
hang in raid5 reshape resume and a race condition introduced in
rc4"
* tag 'md/4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
raid5: fix a small race condition
md-cluster: make md-cluster also can work when compiled into kernel
raid5: guarantee enough stripes to avoid reshape hang
raid5-cache: fix a deadlock in superblock write
Due to an apparent copy/paste bug, the number of counters for the
beacon configuration were checked twice, instead of checking the
number of probe response counters. Fix this to check the number of
probe response counters before parsing those.
Cc: stable@vger.kernel.org
Fixes: 9a774c78e2 ("cfg80211: Support multiple CSA counters")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pull crypto bugfix from Herbert Xu:
"Fix a bug in the cryptd code that may lead to crashes"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: cryptd - initialize child shash_desc on import
If 'IS_ERR(pdata->clk)' is true, then 'clk_disable_unprepare(pdata->clk)'
will do nothing.
It is likely that 'if (!IS_ERR(pdata->clk))' was expected here.
In fact, the test can even be removed because 'clk_disable_unprepare'
already handles such cases.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 4f00878126 ("sctp: apply rhashtable api to send/recv
path"), sctp uses transport rhashtable with .obj_cmpfn sctp_hash_cmp,
in which it compares the members of the transport with the rhashtable
args to check if it's the right transport.
But sctp uses the transport without holding it in sctp_hash_cmp, it can
cause a use-after-free panic. As after it gets transport from hashtable,
another CPU may close the sk and free the asoc. In sctp_association_free,
it frees all the transports, meanwhile, the assoc's refcnt may be reduced
to 0, assoc can be destroyed by sctp_association_destroy.
So after that, transport->assoc is actually an unavailable memory address
in sctp_hash_cmp. Although sctp_hash_cmp is under rcu_read_lock, it still
can not avoid this, as assoc is not freed by RCU.
This patch is to hold the transport before checking it's members with
sctp_transport_hold, in which it checks the refcnt first, holds it if
it's not 0.
Fixes: 4f00878126 ("sctp: apply rhashtable api to send/recv path")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit f70ddc07b6 ("MIPS: c-r4k: Avoid small flush_icache_range SMP
calls") adds checks to force use of hit-type cache ops for small icache
flushes where they are globalised & index-type cache ops aren't, in
order to avoid the overhead of IPIs in those cases. However it
calculated the size of the region being flushed incorrectly, subtracting
the end address from the start address rather than the reverse. This
would have led to an overflow with size wrapping round to some large
value, and likely to the special case for avoiding IPIs not actually
being hit.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Fixes: f70ddc07b6 ("MIPS: c-r4k: Avoid small flush_icache_range SMP calls")
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/14211/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
A discrepancy between cpu_online_mask and cpuset's effective_cpus
mask is inevitable during hotplug since cpuset defers updating of
effective_cpus mask using a workqueue, during which time nothing
prevents the system from more hotplug operations. For that reason
guarantee_online_cpus() walks up the cpuset hierarchy until it finds
an intersection under the assumption that top cpuset's effective_cpus
mask intersects with cpu_online_mask even with such a race occurring.
However a sequence of CPU hotplugs can open a time window, during which
none of the effective CPUs in the top cpuset intersect with
cpu_online_mask.
For example when there are 4 possible CPUs 0-3 and only CPU0 is online:
======================== ===========================
cpu_online_mask top_cpuset.effective_cpus
======================== ===========================
echo 1 > cpu2/online.
CPU hotplug notifier woke up hotplug work but not yet scheduled.
[0,2] [0]
echo 0 > cpu0/online.
The workqueue is still runnable.
[2] [0]
======================== ===========================
Now there is no intersection between cpu_online_mask and
top_cpuset.effective_cpus. Thus invoking sys_sched_setaffinity() at
this moment can cause following:
Unable to handle kernel NULL pointer dereference at virtual address 000000d0
------------[ cut here ]------------
Kernel BUG at ffffffc0001389b0 [verbose debug info unavailable]
Internal error: Oops - BUG: 96000005 [#1] PREEMPT SMP
Modules linked in:
CPU: 2 PID: 1420 Comm: taskset Tainted: G W 4.4.8+ #98
task: ffffffc06a5c4880 ti: ffffffc06e124000 task.ti: ffffffc06e124000
PC is at guarantee_online_cpus+0x2c/0x58
LR is at cpuset_cpus_allowed+0x4c/0x6c
<snip>
Process taskset (pid: 1420, stack limit = 0xffffffc06e124020)
Call trace:
[<ffffffc0001389b0>] guarantee_online_cpus+0x2c/0x58
[<ffffffc00013b208>] cpuset_cpus_allowed+0x4c/0x6c
[<ffffffc0000d61f0>] sched_setaffinity+0xc0/0x1ac
[<ffffffc0000d6374>] SyS_sched_setaffinity+0x98/0xac
[<ffffffc000085cb0>] el0_svc_naked+0x24/0x28
The top cpuset's effective_cpus are guaranteed to be identical to
cpu_online_mask eventually. Hence fall back to cpu_online_mask when
there is no intersection between top cpuset's effective_cpus and
cpu_online_mask.
Signed-off-by: Joonwoo Park <joonwoop@codeaurora.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: cgroups@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # 3.17+
Signed-off-by: Tejun Heo <tj@kernel.org>
When system enters into kdump kernel because of kernel panic, it won't
shutdown devices. On-flight DMA will continue transferring data until
device driver initializes. All devices are supposed to reset during
driver initialization. And this property is used to fix the kdump
failure in system with intel iommu. Other systems with hardware iommu
should be similar. Please check commit 091d42e ("iommu/vt-d: Copy
translation tables from old kernel") and those commits around.
But bnx2 driver doesn't reset device during driver initialization. The
device resetting is deferred to net device up stage. This will cause
hardware iommu handling failure on bnx2 device. And its resetting relies
on firmware. So in this patch move the firmware requesting code to earlier
bnx2_init_one(), then next call bnx2_reset_chip to reset device.
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for your net tree,
they are:
1) Endianess fix for the new nf_tables netlink trace infrastructure,
NFTA_TRACE_POLICY endianess was not correct, patch from Liping Zhang.
2) Fix broken re-route after userspace queueing in nf_tables route
chain. This patch is large but it is simple since it is just getting
this code in sync with iptable_mangle. Also from Liping.
3) NAT mangling via ctnetlink lies to userspace when nf_nat_setup_info()
fails to setup the NAT conntrack extension. This problem has been
there since the beginning, but it can now show up after rhashtable
conversion.
4) Fix possible NULL pointer dereference due to failures in allocating
the synproxy and seqadj conntrack extensions, from Gao feng.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit c1a0e9bc88 ("MIPS: Allow compact branch policy to be changed")
added Kconfig entries allowing for the compact branch policy used by the
compiler for MIPSr6 kernels to be specified. This can be useful for
debugging, particularly in systems where compact branches have recently
been introduced.
Unfortunately mainline gcc 5.x supports MIPSr6 but not the
-mcompact-branches compiler flag, leading to MIPSr6 kernels failing to
build with gcc 5.x with errors such as:
mipsel-linux-gnu-gcc: error: unrecognized command line option '-mcompact-branches=optimal'
make[2]: *** [kernel/bounds.s] Error 1
Fixing this by hiding the Kconfig entry behind another seems to be more
hassle than it's worth, as MIPSr6 & compact branches have been around
for a while now and if policy does need to be set for debug it can be
done easily enough with KCFLAGS. Therefore remove the compact branch
policy Kconfig entries & their handling in the Makefile.
This reverts commit c1a0e9bc88 ("MIPS: Allow compact branch policy to
be changed").
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Fixes: c1a0e9bc88 ("MIPS: Allow compact branch policy to be changed")
Cc: stable <stable@vger.kernel.org> # v4.4+
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/14241/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The alignment of MIPS MAAR region addresses isn't quite right.
- It rounds an already 64 KiB aligned start address up to the next
64 KiB boundary, e.g. 0x80000000 is rounded up to 0x80010000.
- It assumes the end address is already on a 64 KiB boundary and doesn't
round it down. Should that not be the case it will hit the second
BUG_ON() in write_maar_pair().
Both cases are addressed by rounding up and down to 64 KiB boundaries in
the more traditional way of adding 0xffff (for rounding up) and masking
off the low 16 bits.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13858/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Memory regions added with add_memory_region() at the top of the physical
address space will have their end address overflow to 0. This causes
them to be rejected as invalid, and would cause various other issues
later on.
This causes issues on Malta and Boston platforms when wanting to use all
2GB of RAM on a 32-bit kernel, either via highmem (using physical
addresses 0x90000000..0xFFFFFFFF), or with the Malta Enhanced Virtual
Addressing (EVA) layout which exposes the whole 0x80000000..0xFFFFFFFF
physical address range to kernel mode at 0x00000000..0x7FFFFFFF.
Due to the abundance of these non-overflow assumptions and the fact that
memblock already avoids the arithmetic overflow by limiting the size of
new memory regions without the arch code knowing it (in particular
mem_init_free_highmem() will trigger a page dump due to nonzero mapcount
on the last page), it is simpler and safer to just limit the size of the
region in a similar way to memblock but at the arch level to allow most
of the RAM to be used without arithmetic overflows.
Therefore we detect this case specifically and reduce the size of the
region slightly to avoid the arithmetic overflows and cause the last
page to be ignored.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13857/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
When a uprobe-replacement breakpoint instruction is handled, a notifier
is called with DIE_UPROBE argument, but a corresponding exception notify
handler for MIPS attempts to handle DIE_BREAK instead. As a result
the breakpoint instruction isn't handled by the uprobe code and the probed
application terminates with SIGTRAP.
Fix this by changing arch_uprobe_exception_notify code to handle
DIE_UPROBE as a pre-singlestep condition instead of DIE_BREAK.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13884/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The AES-CTR glue code avoids calling into the blkcipher API for the
tail portion of the walk, by comparing the remainder of walk.nbytes
modulo AES_BLOCK_SIZE with the residual nbytes, and jumping straight
into the tail processing block if they are equal. This tail processing
block checks whether nbytes != 0, and does nothing otherwise.
However, in case of an allocation failure in the blkcipher layer, we
may enter this code with walk.nbytes == 0, while nbytes > 0. In this
case, we should not dereference the source and destination pointers,
since they may be NULL. So instead of checking for nbytes != 0, check
for (walk.nbytes % AES_BLOCK_SIZE) != 0, which implies the former in
non-error conditions.
Fixes: 49788fe2a1 ("arm64/crypto: AES-ECB/CBC/CTR/XTS using ARMv8 NEON and Crypto Extensions")
Cc: stable@vger.kernel.org
Reported-by: xiakaixu <xiakaixu@huawei.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The AES-CTR glue code avoids calling into the blkcipher API for the
tail portion of the walk, by comparing the remainder of walk.nbytes
modulo AES_BLOCK_SIZE with the residual nbytes, and jumping straight
into the tail processing block if they are equal. This tail processing
block checks whether nbytes != 0, and does nothing otherwise.
However, in case of an allocation failure in the blkcipher layer, we
may enter this code with walk.nbytes == 0, while nbytes > 0. In this
case, we should not dereference the source and destination pointers,
since they may be NULL. So instead of checking for nbytes != 0, check
for (walk.nbytes % AES_BLOCK_SIZE) != 0, which implies the former in
non-error conditions.
Fixes: 86464859cc ("crypto: arm - AES in ECB/CBC/CTR/XTS modes using ARMv8 Crypto Extensions")
Cc: stable@vger.kernel.org
Reported-by: xiakaixu <xiakaixu@huawei.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When we need to allocate a temporary blkcipher_walk_next and it
fails, the code is supposed to take the slow path of processing
the data block by block. However, due to an unrelated change
we instead end up dereferencing the NULL pointer.
This patch fixes it by moving the unrelated bsize setting out
of the way so that we enter the slow path as inteded.
Fixes: 7607bd8ff0 ("[CRYPTO] blkcipher: Added blkcipher_walk_virt_block")
Cc: stable@vger.kernel.org
Reported-by: xiakaixu <xiakaixu@huawei.com>
Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
The current implementation uses a global per-cpu array to store
data which are used to derive the next IV. This is insecure as
the attacker may change the stored data.
This patch removes all traces of chaining and replaces it with
multiplication of the salt and the sequence number.
Fixes: a10f554fa7 ("crypto: echainiv - Add encrypted chain IV...")
Cc: stable@vger.kernel.org
Reported-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When memory is exhausted, nfct_seqadj_ext_add may fail to add the
synproxy and seqadj extensions. The function nf_ct_seqadj_init doesn't
check if get valid seqadj pointer by the nfct_seqadj.
Now drop the packet directly when fail to add seqadj extension to
avoid dereference NULL pointer in nf_ct_seqadj_init from
init_conntrack().
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Two fixes for 4.8:
- missing static specifier on atmel_hlcdc_crtc_reset()
- bug in the hardware scaling logic
* tag 'drm/atmel-hlcdc/4.8-fixes' of github.com:bbrezillon/linux-at91:
drm/atmel-hlcdc: Make ->reset() implementation static
drm: atmel-hlcdc: Fix vertical scaling
i915 fixes from Jani.
* tag 'drm-intel-fixes-2016-09-08' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Add GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE to SNB
drm/i915: disable 48bit full PPGTT when vGPU is active
drm/i915: enable vGPU detection for all
drm/i915/dvo: Remove dangling call to drm_encoder_cleanup()
Pull clk fixes from Stephen Boyd:
"Some small fixes for the new sunxi clk driver introduced this merge
window"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: sunxi-ng: Fix wrong reset register offsets
clk: sunxi-ng: nk: Make ccu_nk_find_best static
clk: sunxi-ng: Fix inverted test condition in ccu_helper_wait_for_lock
clk: sunxi: Fix return value check in sun8i_a23_mbus_setup()
clk: sunxi: pll2: Fix return value check in sun4i_pll2_setup()
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Stable patches:
- We must serialise LAYOUTGET and LAYOUTRETURN to ensure correct
state accounting
- Fix the CREATE_SESSION slot number
Bugfixes:
- sunrpc: fix a UDP memory accounting regression
- NFS: Fix an error reporting regression in nfs_file_write()
- pNFS: Fix further layout stateid issues
- RPC/rdma: Revert 3d4cf35bd4 ("xprtrdma: Reply buffer
exhaustion...")
- RPC/rdma: Fix receive buffer accounting"
* tag 'nfs-for-4.8-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4.1: Fix the CREATE_SESSION slot number accounting
xprtrdma: Fix receive buffer accounting
xprtrdma: Revert 3d4cf35bd4 ("xprtrdma: Reply buffer exhaustion...")
pNFS: Don't forget the layout stateid if there are outstanding LAYOUTGETs
pNFS: Clear out all layout segments if the server unsets lrp->res.lrs_present
pNFS: Fix pnfs_set_layout_stateid() to clear NFS_LAYOUT_INVALID_STID
pNFS: Ensure LAYOUTGET and LAYOUTRETURN are properly serialised
NFS: Fix error reporting in nfs_file_write()
sunrpc: fix UDP memory accounting
A recent change removed the dependency on BLK_DEV_NVME, which implies
the dependency on PCI and BLOCK. We don't need CONFIG_PCI, but without
CONFIG_BLOCK we get tons of build errors, e.g.
In file included from drivers/nvme/host/core.c:16:0:
linux/blk-mq.h:182:33: error: 'struct gendisk' declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
drivers/nvme/host/core.c: In function 'nvme_setup_rw':
drivers/nvme/host/core.c:295:21: error: implicit declaration of function 'rq_data_dir' [-Werror=implicit-function-declaration]
drivers/nvme/host/nvme.h: In function 'nvme_map_len':
drivers/nvme/host/nvme.h:217:6: error: implicit declaration of function 'req_op' [-Werror=implicit-function-declaration]
drivers/nvme/host/scsi.c: In function 'nvme_trans_bdev_limits_page':
drivers/nvme/host/scsi.c:768:85: error: implicit declaration of function 'queue_max_hw_sectors' [-Werror=implicit-function-declaration]
This adds back the specific CONFIG_BLOCK dependency to avoid broken
configurations.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: aa71987472 ("nvme: fabrics drivers don't need the nvme-pci driver")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
If there is an error on req->mr, req->mr is set to null, however
the following statement sets req->mr->need_inval causing a null
pointer dereference. Fix this by bailing out to label 'out' to
immediately return and hence skip over the offending null pointer
dereference.
Fixes: f5b7b559e1 ("nvme-rdma: Get rid of duplicate variable")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Change nvme-rdma to use the IB Client API to detect device removal.
This has the wonderful benefit of being able to blow away all the
ib/rdma_cm resources for the device being removed. No craziness about
not destroying the cm_id handling the event. No deadlocks due to broken
iw_cm/rdma_cm/iwarp dependencies. And no need to have a bound cm_id
around during controller recovery/reconnect to catch device removal
events.
We don't use the device_add aspect of the ib_client service since we only
want to create resources for an IB device if we have a target utilizing
that device.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
When we get a surprise disconnect from the target we queue a periodic
reconnect (which is the sane thing to do...).
We only move the queues out of CONNECTED when we retry to reconnect (after
10 seconds in the default case) but we stop the blk queues immediately
so we are not bothered with traffic from now on. If delete() is kicking
off in this period the queues are still in CONNECTED state.
Part of the delete sequence is trying to issue ctrl shutdown if the
admin queue is CONNECTED (which it is!). This request is issued but
stuck in blk-mq waiting for the queues to start again. This might be
the one preventing us from forward progress...
The patch separates the queue flags to CONNECTED and DELETING. Now we
will move out of CONNECTED as soon as error recovery kicks in (before
stopping the queues) and DELETING is on when we start the queue deletion.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
nf_nat_setup_info() returns NF_* verdicts, so convert them to error
codes that is what ctnelink expects. This has passed overlook without
having any impact since this nf_nat_setup_info() has always returned
NF_ACCEPT so far. Since 870190a9ec ("netfilter: nat: convert nat bysrc
hash to rhashtable"), this is problem.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull networking fixes from David Miller:
"Mostly small sets of driver fixes scattered all over the place.
1) Mediatek driver fixes from Sean Wang. Forward port not written
correctly during TX map, missed handling of EPROBE_DEFER, and
mistaken use of put_page() instead of skb_free_frag().
2) Fix socket double-free in KCM code, from WANG Cong.
3) QED driver fixes from Sudarsana Reddy Kalluru, including a fix for
using the dcbx buffers before initializing them.
4) Mellanox Switch driver fixes from Jiri Pirko, including a fix for
double fib removals and an error handling fix in
mlxsw_sp_module_init().
5) Fix kernel panic when enabling LLDP in i40e driver, from Dave
Ertman.
6) Fix padding of TSO packets in thunderx driver, from Sunil Goutham.
7) TCP's rcv_wup not initialized properly when using fastopen, from
Neal Cardwell.
8) Don't use uninitialized flow keys in flow dissector, from Gao
Feng.
9) Use after free in l2tp module unload, from Sabrina Dubroca.
10) Fix interrupt registry ordering issues in smsc911x driver, from
Jeremy Linton.
11) Fix crashes in bonding having to do with enslaving and rx_handler,
from Mahesh Bandewar.
12) AF_UNIX deadlock fixes from Linus.
13) In mlx5 driver, don't read skb->xmit_mode after it might have been
freed from the TX reclaim path. From Tariq Toukan.
14) Fix a bug from 2015 in TCP Yeah where the congestion window does
not increase, from Artem Germanov.
15) Don't pad frames on receive in NFP driver, from Jakub Kicinski.
16) Fix chunk fragmenting in SCTP wrt. GSO, from Marcelo Ricardo
Leitner.
17) Fix deletion of VRF routes, from Mark Tomlinson.
18) Fix device refcount leak when DAD fails in ipv6, from Wei Yongjun"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (101 commits)
net/mlx4_en: Fix panic on xmit while port is down
net/mlx4_en: Fixes for DCBX
net/mlx4_en: Fix the return value of mlx4_en_dcbnl_set_state()
net/mlx4_en: Fix the return value of mlx4_en_dcbnl_set_all()
net: ethernet: renesas: sh_eth: add POST registers for rz
drivers: net: phy: mdio-xgene: Add hardware dependency
dwc_eth_qos: do not register semi-initialized device
sctp: identify chunks that need to be fragmented at IP level
mlxsw: spectrum: Set port type before setting its address
mlxsw: spectrum_router: Fix error path in mlxsw_sp_router_init
nfp: don't pad frames on receive
nfp: drop support for old firmware ABIs
nfp: remove linux/version.h includes
tcp: cwnd does not increase in TCP YeAH
net/mlx5e: Fix parsing of vlan packets when updating lro header
net/mlx5e: Fix global PFC counters replication
net/mlx5e: Prevent casting overflow
net/mlx5e: Move an_disable_cap bit to a new position
net/mlx5e: Fix xmit_more counter race issue
tcp: fastopen: avoid negative sk_forward_alloc
...
Add the required PCMCIA clock for the SA1111 "1800" device. This clock
is used to compute timing information for the PCMCIA interface in the
SoC device, rather than the SA1111. Hence, the provision of this clock
is a convenience for the driver and does not reflect the hardware, so
this must not be copied into DT.
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Accidentally booting Collie on Assabet reveals that the locomo driver
incorrectly overwrites gpio-sa1100's chip data for its parent interrupt,
leading to oops in sa1100_gpio_unmask() and sa1100_update_edge_regs()
when "gpio: sa1100: convert to use IO accessors" is applied. Fix locomo
to use the handler data rather than chip data for its parent interrupt.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The cachepolicy variable gets initialized using a masked pmd
value. So far, the pmd has been masked with flags valid for the
2-page table format, but the 3-page table format requires a
different mask. On LPAE, this lead to a wrong assumption of what
initial cache policy has been used. Later a check forces the
cache policy to writealloc and prints the following warning:
Forcing write-allocate cache policy for SMP
This patch introduces a new definition PMD_SECT_CACHE_MASK for
both page table formats which masks in all cache flags in both
cases.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
A fixed mpath was not quite being treated as such:
1) if a PERR frame was received, a fixed mpath was
deactivated.
2) queued path discovery for fixed mpath was potentially
being considered, changing mpath state.
3) other mpath flags were potentially being inherited when
fixing the mpath. Just assign PATH_FIXED and SN_VALID.
This solves several issues when fixing a mesh path in one
direction. The reverse direction mpath should probably
also be fixed, or root announcements at least be enabled.
Signed-off-by: Thomas Pedersen <twp@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
SA1111 PCMCIA was broken when PCMCIA switched to using dev_pm_ops for
the PCMCIA socket class. PCMCIA used to handle suspend/resume via the
socket hosting device, which happened at normal device suspend/resume
time.
However, the referenced commit changed this: much of the resume now
happens much earlier, in the noirq resume handler of dev_pm_ops.
However, on SA1111, the PCMCIA device is not accessible as the SA1111
has not been resumed at _noirq time. It's slightly worse than that,
because the SA1111 has already been put to sleep at _noirq time, so
suspend doesn't work properly.
Fix this by converting the core SA1111 code to use dev_pm_ops as well,
and performing its own suspend/resume at noirq time.
This fixes these errors in the kernel log:
pcmcia_socket pcmcia_socket0: time out after reset
pcmcia_socket pcmcia_socket1: time out after reset
and the resulting lack of PCMCIA cards after a S2RAM cycle.
Fixes: d7646f7632 ("pcmcia: use dev_pm_ops for class pcmcia_socket_class")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The polarity of the high IRQs was being calculated using
SA1111_IRQMASK_HI(), but this assumes a Linux interrupt number, not a
hardware interrupt number. Hence, the resulting mask was incorrect.
Fix this.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Ensure that we propagate the platform_get_irq() error code out of the
probe function. This allows probe deferrals to work correctly should
platform_get_irq() not be able to resolve the interrupt in a DT
environment at probe time.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
When testing Lubbock, it was noticed that the sa1111 pcmcia driver bound
but was not functional due to no sockets being registered. This is
because the return code from the lowlevel board initialisation was not
being propagated out of the probe function. Fix this.
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Add units to the timing information, so we know that the numbers are
nanoseconds. The output changes from:
I/O : 165 (172)
attribute: 300 (316)
common : 300 (316)
to:
I/O : 165ns (172ns)
attribute: 300ns (316ns)
common : 300ns (316ns)
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Fix the reporting of the currently programmed timing information. These
entries have been showing zero due to the clock rate being a factor of
1000 too big. With this change, we go from:
I/O : 165 (0)
attribute: 300 (0)
common : 300 (0)
to:
I/O : 165 (172)
attribute: 300 (316)
common : 300 (316)
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
PCMCIA suspend/resume no longer works since the commit mentioned below,
as the callbacks are no longer made. Convert the driver to the new
dev_pm_ops, which restores the suspend/resume functionality. Tested on
the arm arch Assabet platform.
Fixes: aa8e54b559 ("PM / sleep: Go direct_complete if driver has no callbacks")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
When using intermediate queues, sequence number allocation is deferred
until dequeue. This doesn't work for PS response frames, which bypass
those queues.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Handle the case where the mac80211 intermediate queues are empty and the
driver has buffered frames
Fixes: ba8c3d6f16 ("mac80211: add an intermediate software queue implementation")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Some ST platforms contain interconnect (ICN) clocks which must be handed
correctly in order to obtain full functionality of a given IP. In this
case, if the ICN clocks are not handled properly by the ST SDHCI driver
MMC will break and the following output can be observed:
[ 13.916949] mmc0: Timeout waiting for hardware interrupt.
[ 13.922349] sdhci: =========== REGISTER DUMP (mmc0)===========
[ 13.928175] sdhci: Sys addr: 0x00000000 | Version: 0x00001002
[ 13.933999] sdhci: Blk size: 0x00007040 | Blk cnt: 0x00000001
[ 13.939825] sdhci: Argument: 0x00fffff0 | Trn mode: 0x00000013
[ 13.945650] sdhci: Present: 0x1fff0206 | Host ctl: 0x00000011
[ 13.951475] sdhci: Power: 0x0000000f | Blk gap: 0x00000080
[ 13.957300] sdhci: Wake-up: 0x00000000 | Clock: 0x00003f07
[ 13.963126] sdhci: Timeout: 0x00000004 | Int stat: 0x00000000
[ 13.968952] sdhci: Int enab: 0x02ff008b | Sig enab: 0x02ff008b
[ 13.974777] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[ 13.980602] sdhci: Caps: 0x21ed3281 | Caps_1: 0x00000000
[ 13.986428] sdhci: Cmd: 0x0000063a | Max curr: 0x00000000
[ 13.992252] sdhci: Host ctl2: 0x00000000
[ 13.996166] sdhci: ADMA Err: 0x00000000 | ADMA Ptr: 0x7c048200
[ 14.001990] sdhci: ===========================================
[ 14.009802] mmc0: Got data interrupt 0x02000000 even though no data operation was in progress.
A decent point was raised about minimising the use of a local variable that
we 'could' do without. I've chosen consistency over the possibility of
reducing the local variable count by 1. Thinking that it's more important
for the code to be grouped and authoured in a similar manner/style for
greater maintainability/readability.
Cc: stable@vger.kernel.org
Tested-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This patch adds support for Infineon flashloader 0x8087/0x0801.
The flashloader is used in Telit LE940B modem family with Telit
flashing application.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
The number of CPU feature keys is meant to map 1:1 to the number of CPU
feature flags defined in cputable.h, and the latter must fit in an
unsigned long.
In commit 4db7327194 ("powerpc: Add option to use jump label for
cpu_has_feature()"), I incorrectly defined NUM_CPU_FTR_KEYS to 64.
There should be no real adverse consequences of this bug, other than us
allocating too many keys.
Fix it by using BITS_PER_LONG.
Fixes: 4db7327194 ("powerpc: Add option to use jump label for cpu_has_feature()")
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
pnv_wakeup_tb_loss() currently expects cr4 to be "eq" if the CPU is
waking up from a complete hypervisor state loss. Hence, it currently
restores the SPR contents only if cr4 is "eq".
However, after commit bcef83a00d ("powerpc/powernv: Add platform
support for stop instruction"), on ISA v3.0 CPUs, the function
pnv_restore_hyp_resource() sets cr4 to contain the result of the
comparison between the state the CPU has woken up from and the first
deep stop state before calling pnv_wakeup_tb_loss().
Thus if the CPU woke up from a state that is deeper than the first
deep stop state, cr4 will have "gt" set and hence, pnv_wakeup_tb_loss()
will fail to restore the SPRs on waking up from such a state.
Fix the code in pnv_wakeup_tb_loss() to restore the SPR states when cr4
is "eq" or "gt".
Fixes: bcef83a00d ("powerpc/powernv: Add platform support for stop instruction")
Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com>
Reviewed-by: Shreyas B. Prabhu <shreyasbp@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tariq Toukan says:
====================
mlx4 fixes
This patchset contains several bug fixes from the team to the
mlx4 Eth driver.
Series generated against net commit:
c2f57fb97d "drivers: net: phy: mdio-xgene: Add hardware dependency"
v2:
* excluded some cleanup patches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When port is down, tx drop counter update is not needed.
Updating the counter in this case can cause a kernel
panic as when the port is down, ring can be NULL.
Fixes: 63a664b7e9 ("net/mlx4_en: fix tx_dropped bug")
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a capability check before enabling DCBX.
In addition, it re-organizes the relevant data structures,
and fixes a typo in a define.
Fixes: af7d518526 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mlx4_en_dcbnl_set_state() returns u8, the return value from
mlx4_en_setup_tc() could be negative in case of failure, so fix that.
Fixes: af7d518526 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands")
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit aa71987472 ("nvme: fabrics drivers don't need the nvme-pci
driver") removed the dependency on BLK_DEV_NVME, but the cdoe does
depend on the block layer (which used to be an implicit dependency
through BLK_DEV_NVME).
Otherwise you get various errors from the kbuild test robot random
config testing when that happens to hit a configuration with BLOCK
device support disabled.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jay Freyensee <james_p_freyensee@linux.intel.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull IIO fixes from Greg KH:
"Here are a few small IIO fixes for 4.8-rc6.
Nothing major, full details are in the shortlog, all of these have
been in linux-next with no reported issues"
* tag 'staging-4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio:core: fix IIO_VAL_FRACTIONAL sign handling
iio: ensure ret is initialized to zero before entering do loop
iio: accel: kxsd9: Fix scaling bug
iio: accel: bmc150: reset chip at init time
iio: fix pressure data output unit in hid-sensor-attributes
tools:iio:iio_generic_buffer: fix trigger-less mode
Pull USB fixes from Greg KH:
"Here are some small USB gadget, phy, and xhci fixes for 4.8-rc6.
All of these resolve minor issues that have been reported, and all
have been in linux-next with no reported issues"
* tag 'usb-4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: chipidea: udc: fix NULL ptr dereference in isr_setup_status_phase
xhci: fix null pointer dereference in stop command timeout function
usb: dwc3: pci: fix build warning on !PM_SLEEP
usb: gadget: prevent potenial null pointer dereference on skb->len
usb: renesas_usbhs: fix clearing the {BRDY,BEMP}STS condition
usb: phy: phy-generic: Check clk_prepare_enable() error
usb: gadget: udc: renesas-usb3: clear VBOUT bit in DRD_CON
Revert "usb: dwc3: gadget: always decrement by 1"
Ensure that we conform to the algorithm described in RFC5661, section
18.36.4 for when to bump the sequence id. In essence we do it for all
cases except when the RPC call timed out, or in case of the server returning
NFS4ERR_DELAY or NFS4ERR_STALE_CLIENTID.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org
Due to a mistake in the hardware manual, the FWSLC and POST1-4 registers
were not documented and left out of the driver for RZ/A making the CAM
feature non-operational.
Additionally, when the offset values for POST1-4 are left blank, the driver
attempts to set them using an offset of 0xFFFF which can cause a memory
corruption or panic.
This patch fixes the panic and properly enables CAM.
Reported-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The silead touch-controller ICs use a different firmware per digitizer /
tablet model. So there are going to be quite a few of then and they really
should be under a separate subdir.
This commit prefixes the default firmware names with "silead/" just like
we are already doing for devicetree specified firmware names.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver has supported touchscreen-fw-name to specify the firmware to
load since it has been merged, but this was omitted from the dt-binding
documentation.
During review of adding touchscreen-fw-name to the binding documentation
it was brought up that there is a standard property name called
"firmware-name" for this, which should be used.
Since there are no users of touchscreen-fw-name yet, this commit
adds documentation of "firmware-name" to the dt-binding documentation
and switches the driver over to use this.
This commit also makes the driver add a "silead/" prefix to the
firmware name from dt before calling request_firmware. That the
firmware files are stored under /lib/firmware/silead under Linux
is an implementation detail and does not belong in devicetree.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull libnvdimm fixes from Dan Williams:
"nvdimm fixes for v4.8, two of them are tagged for -stable:
- Fix devm_memremap_pages() to use track_pfn_insert(). Otherwise,
DAX pmd mappings end up with an uncached pgprot, and unusable
performance for the device-dax interface. The device-dax interface
appeared in 4.7 so this is tagged for -stable.
- Fix a couple VM_BUG_ON() checks in the show_smaps() path to
understand DAX pmd entries. This fix is tagged for -stable.
- Fix a mis-merge of the nfit machine-check handler to flip the
polarity of an if() to match the final version of the patch that
Vishal sent for 4.8-rc1. Without this the nfit machine check
handler never detects / inserts new 'badblocks' entries which
applications use to identify lost portions of files.
- For test purposes, fix the nvdimm_clear_poison() path to operate on
legacy / simulated nvdimm memory ranges. Without this fix a test
can set badblocks, but never clear them on these ranges.
- Fix the range checking done by dax_dev_pmd_fault(). This is not
tagged for -stable since this problem is mitigated by specifying
aligned resources at device-dax setup time.
These patches have appeared in a next release over the past week. The
recent rebase you can see in the timestamps was to drop an invalid fix
as identified by the updated device-dax unit tests [1]. The -mm
touches have an ack from Andrew"
[1]: "[ndctl PATCH 0/3] device-dax test for recent kernel bugs"
https://lists.01.org/pipermail/linux-nvdimm/2016-September/006855.html
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm: allow legacy (e820) pmem region to clear bad blocks
nfit, mce: Fix SPA matching logic in MCE handler
mm: fix cache mode of dax pmd mappings
mm: fix show_smap() for zone_device-pmd ranges
dax: fix mapping size check
Pull i2c fixes from Wolfram Sang:
"Mostly driver bugfixes, but also a few cleanups which are nice to have
out of the way"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: rk3x: Restore clock settings at resume time
i2c: Spelling s/acknowedge/acknowledge/
i2c: designware: save the preset value of DW_IC_SDA_HOLD
Documentation: i2c: slave-interface: add note for driver development
i2c: mux: demux-pinctrl: run properly with multiple instances
i2c: bcm-kona: fix inconsistent indenting
i2c: rcar: use proper device with dma_mapping_error
i2c: sh_mobile: use proper device with dma_mapping_error
i2c: mux: demux-pinctrl: invalidate properly when switching fails
Pull fscrypto fixes fromTed Ts'o:
"Fix some brown-paper-bag bugs for fscrypto, including one one which
allows a malicious user to set an encryption policy on an empty
directory which they do not own"
* tag 'for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
fscrypto: require write access to mount to set encryption policy
fscrypto: only allow setting encryption policy on directories
fscrypto: add authorization check for setting encryption policy
The order of accesses to ring buffer's aux_mmap_count and aux_refcount
has to be preserved across the users, namely perf_mmap_close() and
perf_aux_output_begin(), otherwise the inversion can result in the latter
holding the last reference to the aux buffer and subsequently free'ing
it in atomic context, triggering a warning.
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 257 at kernel/events/ring_buffer.c:541 __rb_free_aux+0x11a/0x130
> CPU: 0 PID: 257 Comm: stopbug Not tainted 4.8.0-rc1+ #2596
> Call Trace:
> [<ffffffff810f3e0b>] __warn+0xcb/0xf0
> [<ffffffff810f3f3d>] warn_slowpath_null+0x1d/0x20
> [<ffffffff8121182a>] __rb_free_aux+0x11a/0x130
> [<ffffffff812127a8>] rb_free_aux+0x18/0x20
> [<ffffffff81212913>] perf_aux_output_begin+0x163/0x1e0
> [<ffffffff8100c33a>] bts_event_start+0x3a/0xd0
> [<ffffffff8100c42d>] bts_event_add+0x5d/0x80
> [<ffffffff81203646>] event_sched_in.isra.104+0xf6/0x2f0
> [<ffffffff8120652e>] group_sched_in+0x6e/0x190
> [<ffffffff8120694e>] ctx_sched_in+0x2fe/0x5f0
> [<ffffffff81206ca0>] perf_event_sched_in+0x60/0x80
> [<ffffffff81206d1b>] ctx_resched+0x5b/0x90
> [<ffffffff81207281>] __perf_event_enable+0x1e1/0x240
> [<ffffffff81200639>] event_function+0xa9/0x180
> [<ffffffff81202000>] ? perf_cgroup_attach+0x70/0x70
> [<ffffffff8120203f>] remote_function+0x3f/0x50
> [<ffffffff811971f3>] flush_smp_call_function_queue+0x83/0x150
> [<ffffffff81197bd3>] generic_smp_call_function_single_interrupt+0x13/0x60
> [<ffffffff810a6477>] smp_call_function_single_interrupt+0x27/0x40
> [<ffffffff81a26ea9>] call_function_single_interrupt+0x89/0x90
> [<ffffffff81120056>] finish_task_switch+0xa6/0x210
> [<ffffffff81120017>] ? finish_task_switch+0x67/0x210
> [<ffffffff81a1e83d>] __schedule+0x3dd/0xb50
> [<ffffffff81a1efe5>] schedule+0x35/0x80
> [<ffffffff81128031>] sys_sched_yield+0x61/0x70
> [<ffffffff81a25be5>] entry_SYSCALL_64_fastpath+0x18/0xa8
> ---[ end trace 6235f556f5ea83a9 ]---
This patch puts the checks in perf_aux_output_begin() in the same order
as that of perf_mmap_close().
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/20160906132353.19887-3-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
In the mmap_close() path we need to stop all the AUX events that are
writing data to the AUX area that we are unmapping, before we can
safely free the pages. To determine if an event needs to be stopped,
we're comparing its ->rb against the one that's getting unmapped.
However, a SET_OUTPUT ioctl may turn up inside an AUX transaction
and swizzle event::rb to some other ring buffer, but the transaction
will keep writing data to the old ring buffer until the event gets
scheduled out. At this point, mmap_close() will skip over such an
event and will proceed to free the AUX area, while it's still being
used by this event, which will set off a warning in the mmap_close()
path and cause a memory corruption.
To avoid this, always stop an AUX event before its ->rb is updated;
this will release the (potentially) last reference on the AUX area
of the buffer. If the event gets restarted, its new ring buffer will
be used. If another SET_OUTPUT comes and switches it back to the
old ring buffer that's getting unmapped, it's also fine: this
ring buffer's aux_mmap_count will be zero and AUX transactions won't
start any more.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: vince@deater.net
Link: http://lkml.kernel.org/r/20160906132353.19887-2-alexander.shishkin@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since setting an encryption policy requires writing metadata to the
filesystem, it should be guarded by mnt_want_write/mnt_drop_write.
Otherwise, a user could cause a write to a frozen or readonly
filesystem. This was handled correctly by f2fs but not by ext4. Make
fscrypt_process_policy() handle it rather than relying on the filesystem
to get it right.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: stable@vger.kernel.org # 4.1+; check fs/{ext4,f2fs}
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
The patch
fs/cifs: make share unaccessible at root level mountable
makes use of prepaths when any component of the underlying path is
inaccessible.
When mounting 2 separate shares having different prepaths but are other
wise similar in other respects, we end up sharing superblocks when we
shouldn't be doing so.
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Tested-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Fix memory leaks introduced by the patch
fs/cifs: make share unaccessible at root level mountable
Also move allocation of cifs_sb->prepath to cifs_setup_cifs_sb().
Signed-off-by: Sachin Prabhu <sprabhu@redhat.com>
Tested-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
The FS_IOC_SET_ENCRYPTION_POLICY ioctl allowed setting an encryption
policy on nondirectory files. This was unintentional, and in the case
of nonempty regular files did not behave as expected because existing
data was not actually encrypted by the ioctl.
In the case of ext4, the user could also trigger filesystem errors in
->empty_dir(), e.g. due to mismatched "directory" checksums when the
kernel incorrectly tried to interpret a regular file as a directory.
This bug affected ext4 with kernels v4.8-rc1 or later and f2fs with
kernels v4.6 and later. It appears that older kernels only permitted
directories and that the check was accidentally lost during the
refactoring to share the file encryption code between ext4 and f2fs.
This patch restores the !S_ISDIR() check that was present in older
kernels.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
On an ext4 or f2fs filesystem with file encryption supported, a user
could set an encryption policy on any empty directory(*) to which they
had readonly access. This is obviously problematic, since such a
directory might be owned by another user and the new encryption policy
would prevent that other user from creating files in their own directory
(for example).
Fix this by requiring inode_owner_or_capable() permission to set an
encryption policy. This means that either the caller must own the file,
or the caller must have the capability CAP_FOWNER.
(*) Or also on any regular file, for f2fs v4.6 and later and ext4
v4.8-rc1 and later; a separate bug fix is coming for that.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Cc: stable@vger.kernel.org # 4.1+; check fs/{ext4,f2fs}
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This fixes subpage writes when using 4-bit HW ECC.
There has been numerous reports about ECC errors with devices using this
driver for a while. Also the 4-bit ECC has been reported as broken with
subpages in [1] and with 16 bits NANDs in the driver and in mach* board
files both in mainline and in the vendor BSPs.
What I saw with 4-bit ECC on a 16bits NAND (on an LCDK) which got me to
try reinitializing the ECC engine:
- R/W on whole pages properly generates/checks RS code
- try writing the 1st subpage only of a blank page, the subpage is well
written and the RS code properly generated, re-reading the same page
the HW detects some ECC error, reading the same page again no ECC
error is detected
Note that the ECC engine is already reinitialized in the 1-bit case.
Tested on my LCDK with UBI+UBIFS using subpages.
This could potentially get rid of the issue workarounded in [1].
[1] 28c015a9da ("mtd: davinci-nand: disable subpage write for keystone-nand")
Fixes: 6a4123e581 ("mtd: nand: davinci_nand, 4-bit ECC for smallpage")
Cc: <stable@vger.kernel.org>
Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Kalle Valo says:
====================
wireless-drivers fixes for 4.8
iwlwifi
* fix P2P dump trigger
* prevent a potential null dereference in iwlmvm
* prevent an uninitialized value from being returned in iwlmvm
* advertise support for channel width change in AP mode
ath10k
* fix racy rx status retrieval from htt context
* QCA9887 support is not experimental anymore, remove the warning message
ath9k
* fix regression with led GPIOs
* fix AR5416 GPIO access warning
brcmfmac
* avoid potential stack overflow in brcmf_cfg80211_start_ap()
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We move register_netdev() to the end of dwceqos_probe() to close any
races where the netdev callbacks are called before the initialization
has finished.
Reported-by: Pavel Andrianov <andrianov@ispras.ru>
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously, without GSO, it was easy to identify it: if the chunk didn't
fit and there was no data chunk in the packet yet, we could fragment at
IP level. So if there was an auth chunk and we were bundling a big data
chunk, it would fragment regardless of the size of the auth chunk. This
also works for the context of PMTU reductions.
But with GSO, we cannot distinguish such PMTU events anymore, as the
packet is allowed to exceed PMTU.
So we need another check: to ensure that the chunk that we are adding,
actually fits the current PMTU. If it doesn't, trigger a flush and let
it be fragmented at IP level in the next round.
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bad blocks can be injected via /sys/block/pmemN/badblocks. In a situation
where legacy pmem is being used or a pmem region created by using memmap
kernel parameter, the injected bad blocks are not cleared due to
nvdimm_clear_poison() failing from lack of ndctl function pointer. In
this case we need to just return as handled and allow the bad blocks to
be cleared rather than fail.
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
track_pfn_insert() in vmf_insert_pfn_pmd() is marking dax mappings as
uncacheable rendering them impractical for application usage. DAX-pte
mappings are cached and the goal of establishing DAX-pmd mappings is to
attain more performance, not dramatically less (3 orders of magnitude).
track_pfn_insert() relies on a previous call to reserve_memtype() to
establish the expected page_cache_mode for the range. While memremap()
arranges for reserve_memtype() to be called, devm_memremap_pages() does
not. So, teach track_pfn_insert() and untrack_pfn() how to handle
tracking without a vma, and arrange for devm_memremap_pages() to
establish the write-back-cache reservation in the memtype tree.
Cc: <stable@vger.kernel.org>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Nilesh Choudhury <nilesh.choudhury@oracle.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Toshi Kani <toshi.kani@hpe.com>
Reported-by: Kai Zhang <kai.ka.zhang@oracle.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Attempting to dump /proc/<pid>/smaps for a process with pmd dax mappings
currently results in the following VM_BUG_ONs:
kernel BUG at mm/huge_memory.c:1105!
task: ffff88045f16b140 task.stack: ffff88045be14000
RIP: 0010:[<ffffffff81268f9b>] [<ffffffff81268f9b>] follow_trans_huge_pmd+0x2cb/0x340
[..]
Call Trace:
[<ffffffff81306030>] smaps_pte_range+0xa0/0x4b0
[<ffffffff814c2755>] ? vsnprintf+0x255/0x4c0
[<ffffffff8123c46e>] __walk_page_range+0x1fe/0x4d0
[<ffffffff8123c8a2>] walk_page_vma+0x62/0x80
[<ffffffff81307656>] show_smap+0xa6/0x2b0
kernel BUG at fs/proc/task_mmu.c:585!
RIP: 0010:[<ffffffff81306469>] [<ffffffff81306469>] smaps_pte_range+0x499/0x4b0
Call Trace:
[<ffffffff814c2795>] ? vsnprintf+0x255/0x4c0
[<ffffffff8123c46e>] __walk_page_range+0x1fe/0x4d0
[<ffffffff8123c8a2>] walk_page_vma+0x62/0x80
[<ffffffff81307696>] show_smap+0xa6/0x2b0
These locations are sanity checking page flags that must be set for an
anonymous transparent huge page, but are not set for the zone_device
pages associated with dax mappings.
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Jiri Pirko says:
====================
mlxsw: couple of fixes
Couple of fixes from Ido and myself.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
During port init, we currently set the port's type to Ethernet after
setting its MAC address. However, the hardware documentation states this
should be the other way around.
Align the driver with the hardware documentation and set the port's MAC
address after setting its type.
Fixes: 56ade8fe3f ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When neigh_init fails, we have to do proper cleanup including
router_fini call.
Fixes: 6cf3c971dc ("mlxsw: spectrum_router: Add private neigh table")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
... in all cases, including the failing access_ok()
Note that some architectures using asm-generic/uaccess.h have
__copy_from_user() not zeroing the tail on failure halfway
through. This variant works either way.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The resent conversion of the cpu hotplug support in the uncore driver
introduced a regression due to the way the callbacks are invoked at
initialization time.
The old code called the prepare/starting/online function on each online cpu
as a block. The new code registers the hotplug callbacks in the core for
each state. The core invokes the callbacks at each registration on all
online cpus.
The code implicitely relied on the prepare/starting/online callbacks being
called as combo on a particular cpu, which was not obvious and completely
undocumented.
The resulting subtle wreckage happens due to the way how the uncore code
manages shared data structures for cpus which share an uncore resource in
hardware. The sharing is determined in the cpu starting callback, but the
prepare callback allocates per cpu data for the upcoming cpu because
potential sharing is unknown at this point. If the starting callback finds
a online cpu which shares the hardware resource it takes a refcount on the
percpu data of that cpu and puts the own data structure into a
'free_at_online' pointer of that shared data structure. The online callback
frees that.
With the old model this worked because in a starting callback only one non
unused structure (the one of the starting cpu) was available. The new code
allocates the data structures for all cpus when the prepare callback is
registered.
Now the starting function iterates through all online cpus and looks for a
data structure (skipping its own) which has a matching hardware id. The id
member of the data structure is initialized to 0, but the hardware id can
be 0 as well. The resulting wreckage is:
CPU0 finds a matching id on CPU1, takes a refcount on CPU1 data and puts
its own data structure into CPU1s data structure to be freed.
CPU1 skips CPU0 because the data structure is its allegedly unsued own.
It finds a matching id on CPU2, takes a refcount on CPU1 data and puts
its own data structure into CPU2s data structure to be freed.
....
Now the online callbacks are invoked.
CPU0 has a pointer to CPU1s data and frees the original CPU0 data. So
far so good.
CPU1 has a pointer to CPU2s data and frees the original CPU1 data, which
is still referenced by CPU0 ---> Booom
So there are two issues to be solved here:
1) The id field must be initialized at allocation time to a value which
cannot be a valid hardware id, i.e. -1
This prevents the above scenario, but now CPU1 and CPU2 both stick their
own data structure into the free_at_online pointer of CPU0. So we leak
CPU1s data structure.
2) Fix the memory leak described in #1
Instead of having a single pointer, use a hlist to enqueue the
superflous data structures which are then freed by the first cpu
invoking the online callback.
Ideally we should know the sharing _before_ invoking the prepare callback,
but that's way beyond the scope of this bug fix.
[ tglx: Rewrote changelog ]
Fixes: 96b2bd3866 ("perf/x86/amd/uncore: Convert to hotplug state machine")
Reported-and-tested-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/20160909160822.lowgmkdwms2dheyv@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull virtio fixes from Michael Tsirkin:
"This includes a couple of bugfixs for virtio.
The virtio console patch is actually also in x86/tip targeting 4.9
because it helps vmap stacks, but it also fixes IOMMU_PLATFORM which
was added in 4.8, and it seems important not to ship that in a broken
configuration"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_console: Stop doing DMA on the stack
virtio: mark vring_dma_dev() static
Pull power management fixes from Rafael Wysocki:
"This includes a PM QoS framework fix from Tejun to prevent interrupts
from being enabled unexpectedly during early boot and a cpufreq
documentation fix.
Specifics:
- If the PM QoS framework invokes cancel_delayed_work_sync() during
early boot, it will enable interrupts which is not expected at that
point, so prevent it from happening (Tejun Heo)
- Fix cpufreq statistic documentation to follow a recent change in
behavior that forgot to update it as appropriate (Jean Delvare)"
* tag 'pm-4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq-stats: Minor documentation fix
PM / QoS: avoid calling cancel_delayed_work_sync() during early boot
Pull GPIO fixes from Linus Walleij:
"Some GPIO fixes that have been boiling the last two weeks or so.
Nothing special, I'm trying to sort out some Kconfig business and
Russell needs a fix in for -his SA1100 rework.
Summary:
- Revert a pointless attempt to add an include to solve the UM allyes
compilation problem.
- Make the mcp23s08 depend on OF_GPIO as it uses it and doesn't
compile properly without it.
- Fix a probing problem for ucb1x00"
* tag 'gpio-v4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: sa1100: fix irq probing for ucb1x00
gpio: mcp23s08: make driver depend on OF_GPIO
Revert "gpio: include <linux/io-mapping.h> in gpiolib-of"
Pull fuse fix from Miklos Szeredi:
"This fixes a deadlock when fuse, direct I/O and loop device are
combined"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: direct-io: don't dirty ITER_BVEC pages
Pull overlayfs fix from Miklos Szeredi:
"This fixes a regression caused by the last pull request"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: fix workdir creation
Pull btrfs fixes from Chris Mason:
"I'm not proud of how long it took me to track down that one liner in
btrfs_sync_log(), but the good news is the patches I was trying to
blame for these problems were actually fine (sorry Filipe)"
* 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: introduce tickets_id to determine whether asynchronous metadata reclaim work makes progress
btrfs: remove root_log_ctx from ctx list before btrfs_sync_log returns
btrfs: do not decrease bytes_may_use when replaying extents
We get 1 warning when building kernel with W=1:
drivers/gpu/drm/vc4/vc4_bo.c:147:6: warning: no previous prototype for 'vc4_bo_cache_purge' [-Wmissing-prototypes]
In fact, this function is only used in the file in which it is
declared and don't need a declaration, but can be made static.
So this patch marks it 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Pull sound fixes from Takashi Iwai:
"We've got quite a few fixes at this time, and all are stable patches.
syzkaller strikes back again (episode 19 or so), and we had to plug
some holes in ALSA core part (mostly timer).
In addition, a couple of FireWire audio fixes for the invalid copy
user calls in locks, and a few quirks for HD-audio and USB-audio as
usual are included"
* tag 'sound-4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: rawmidi: Fix possible deadlock with virmidi registration
ALSA: timer: Fix zero-division by continue of uninitialized instance
ALSA: timer: fix NULL pointer dereference in read()/ioctl() race
ALSA: fireworks: accessing to user space outside spinlock
ALSA: firewire-tascam: accessing to user space outside spinlock
ALSA: hda - Enable subwoofer on Dell Inspiron 7559
ALSA: hda - Add headset mic quirk for Dell Inspiron 5468
ALSA: usb-audio: Add sample rate inquiry quirk for B850V3 CP2114
ALSA: timer: fix NULL pointer dereference on memory allocation failure
ALSA: timer: fix division by zero after SNDRV_TIMER_IOCTL_CONTINUE
virtio_console uses a small DMA buffer for control requests. Move
that buffer into heap memory.
Doing virtio DMA on the stack is normally okay on non-DMA-API virtio
systems (which is currently most of them), but it breaks completely
if the stack is virtually mapped.
Tested by typing both directions using picocom aimed at /dev/hvc0.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
We get 1 warning when building kernel with W=1:
drivers/virtio/virtio_ring.c:170:16: warning: no previous prototype for 'vring_dma_dev' [-Wmissing-prototypes]
In fact, this function is only used in the file in which it is
declared and don't need a declaration, but can be made static.
so this patch marks this function with 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
commit 5f9d1fde7d54a5(raid5: fix memory leak of bio integrity data)
moves bio_reset to bio_endio. But it introduces a small race condition.
It does bio_reset after raid5_release_stripe, which could make the
stripe reusable and hence reuse the bio just before bio_reset. Moving
bio_reset before raid5_release_stripe is called should fix the race.
Reported-and-tested-by: Stefan Priebe - Profihost AG <s.priebe@profihost.ag>
Signed-off-by: Shaohua Li <shli@fb.com>
Pull arm64 fixes from Catalin Marinas:
- smp_mb__before_spinlock() changed to smp_mb() on arm64 since the
generic definition to smp_wmb() is not sufficient
- avoid a recursive loop with the graph tracer by using using
preempt_(enable|disable)_notrace in _percpu_(read|write)
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: use preempt_disable_notrace in _percpu_read/write
arm64: spinlocks: implement smp_mb__before_spinlock() as smp_mb()
Pull "Handle STiH410 interconnect clock required for EHCI/OHCI and SDHCI" from Patrice Chotard:
With the introduction of critical-clock support in v4.8, our developers'
default configuration is to run with 'clk_ignore_unused' removed. This
patch-set ensures they can achieve successful boot when a) booting from
an SD Card and when b) booting using USB->Eth adaptors for NFS booting.
* tag 'sti-dt-fixes-for-v4.8-rcs' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
ARM: dts: STiH407-family: Provide interconnect clock for consumption in ST SDHCI
ARM: dts: STiH410: Handle interconnect clock required by EHCI/OHCI (USB)
Merge "Renesas ARM Based SoC Fixes for v4.8" from Simon Horman:
* Correct R-Car Gen2 regulator quirk
* tag 'renesas-fixes-for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: fix regulator quirk for Gen2
Pull powerpc fixes from Michael Ellerman:
"Fixes marked for stable:
- Don't alias user region to other regions below PAGE_OFFSET from
Paul Mackerras
- Fix again csum_partial_copy_generic() on 32-bit from Christophe
Leroy
- Fix corrupted PE allocation bitmap on releasing PE from Gavin Shan
Fixes for code merged this cycle:
- Fix crash on releasing compound PE from Gavin Shan
- Fix processor numbers in OPAL ICP from Benjamin Herrenschmidt
- Fix little endian build with CONFIG_KEXEC=n from Thiago Jung
Bauermann"
* tag 'powerpc-4.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Don't alias user region to other regions below PAGE_OFFSET
powerpc/32: Fix again csum_partial_copy_generic()
powerpc/powernv: Fix corrupted PE allocation bitmap on releasing PE
powerpc/powernv: Fix crash on releasing compound PE
powerpc/xics/opal: Fix processor numbers in OPAL ICP
powerpc/pseries: Fix little endian build with CONFIG_KEXEC=n
Pull ARM fixes from Russell King:
"A few ARM fixes:
- Robin Murphy noticed that the non-secure privileged entry was
relying on undefined behaviour, which needed to be fixed.
- Vladimir Murzin noticed that prov-v7 fails to build for MMUless
configurations because a required header file wasn't included.
- A bunch of fixes for StrongARM regressions found while testing
4.8-rc on such platforms"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: sa1100: clear reset status prior to reboot
ARM: 8600/1: Enforce some NS-SVC initialisation
ARM: 8599/1: mm: pull asm/memory.h explicitly
ARM: sa1100: register clocks early
ARM: sa1100: fix 3.6864MHz clock
Don't return the confusing -EIO error code when the device is not registered,
instead return -ENODEV which is the proper thing to do in this situation.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
If the adapter is configured as 'Unregistered', then cec_receive_notify
incorrectly thinks that broadcast messages are directed messages. The
destination for broadcast messages is 0xf, and the logical address
assigned to Unregistered devices is also 0xf and the logic didn't handle
that correctly.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Felipe writes:
usb: fixes for v4.8-rc6
Unfortunately we have a bogus dwc3 patch leaked through the cracks and
got merged into Linus' HEAD. That patch ended up causing off-by-1 error
in our TRB accounting logic. Thankfully John Youn found out the problem
and we provided a revert to the bogus dwc3 patch in no time.
Apart from this off-by-1 error, we have two fixes to the Renesas drivers,
a small fix to our generic phy driver, a NULL pointer dereference fix for
f_eem and a build warning fix in dwc3.
Jonathan writes:
Second set of IIO fixes for the 4.8 cycle.
We have a big rework of the kxsd9 driver queued up behind the fix below and
a fix for a recent fix that was marked for stable.
Hence this fix series is perhaps a little more urgent than average for IIO.
* core
- a fix for a fix in the last set. The recent fix for blocking ops when
! task running left a path (unlikely one) in which the function return
value was not set - so initialise it to 0.
- The IIO_TYPE_FRACTIONAL code previously didn't cope with negative
fractions. Turned out a fix for this was in Analog's tree but hadn't made
it upstream.
* bmc150
- reset chip at init time. At least one board out there ends up coming up
in an unstable state due to noise during power up. The reset does no
harm on other boards.
* kxsd9
- Fix a bug in the reported scaling due to failing to set the integer
part to 0.
* hid-sensors-pressure
- Output was in the wrong units to comply with the IIO ABI.
* tools
- iio_generic_buffer: Fix the trigger-less mode by ensuring we don't fault
out for having no trigger when we explicitly said we didn't want to have
one.
When debug preempt or preempt tracer is enabled, preempt_count_add/sub()
can be traced by function and function graph tracing, and
preempt_disable/enable() would call preempt_count_add/sub(), so in Ftrace
subsystem we should use preempt_disable/enable_notrace instead.
In the commit 345ddcc882 ("ftrace: Have set_ftrace_pid use the bitmap
like events do") the function this_cpu_read() was added to
trace_graph_entry(), and if this_cpu_read() calls preempt_disable(), graph
tracer will go into a recursive loop, even if the tracing_on is
disabled.
So this patch change to use preempt_enable/disable_notrace instead in
this_cpu_read().
Since Yonghui Yang helped a lot to find the root cause of this problem,
so also add his SOB.
Signed-off-by: Yonghui Yang <mark.yang@spreadtrum.com>
Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
smp_mb__before_spinlock() is intended to upgrade a spin_lock() operation
to a full barrier, such that prior stores are ordered with respect to
loads and stores occuring inside the critical section.
Unfortunately, the core code defines the barrier as smp_wmb(), which
is insufficient to provide the required ordering guarantees when used in
conjunction with our load-acquire-based spinlock implementation.
This patch overrides the arm64 definition of smp_mb__before_spinlock()
to map to a full smp_mb().
Cc: <stable@vger.kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Reported-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
On arm/arm64, we depend on the kvm_unmap_hva* callbacks (via
mmu_notifiers::invalidate_*) to unmap the stage2 pagetables when
the userspace buffer gets unmapped. However, when the Hypervisor
process exits without explicit unmap of the guest buffers, the only
notifier we get is kvm_arch_flush_shadow_all() (via mmu_notifier::release
) which does nothing on arm. Later this causes us to access pages that
were already released [via exit_mmap() -> unmap_vmas()] when we actually
get to unmap the stage2 pagetable [via kvm_arch_destroy_vm() ->
kvm_free_stage2_pgd()]. This triggers crashes with CONFIG_DEBUG_PAGEALLOC,
which unmaps any free'd pages from the linear map.
[ 757.644120] Unable to handle kernel paging request at virtual address
ffff800661e00000
[ 757.652046] pgd = ffff20000b1a2000
[ 757.655471] [ffff800661e00000] *pgd=00000047fffe3003, *pud=00000047fcd8c003,
*pmd=00000047fcc7c003, *pte=00e8004661e00712
[ 757.666492] Internal error: Oops: 96000147 [#3] PREEMPT SMP
[ 757.672041] Modules linked in:
[ 757.675100] CPU: 7 PID: 3630 Comm: qemu-system-aar Tainted: G D
4.8.0-rc1 #3
[ 757.683240] Hardware name: AppliedMicro X-Gene Mustang Board/X-Gene Mustang Board,
BIOS 3.06.15 Aug 19 2016
[ 757.692938] task: ffff80069cdd3580 task.stack: ffff8006adb7c000
[ 757.698840] PC is at __flush_dcache_area+0x1c/0x40
[ 757.703613] LR is at kvm_flush_dcache_pmd+0x60/0x70
[ 757.708469] pc : [<ffff20000809dbdc>] lr : [<ffff2000080b4a70>] pstate: 20000145
...
[ 758.357249] [<ffff20000809dbdc>] __flush_dcache_area+0x1c/0x40
[ 758.363059] [<ffff2000080b6748>] unmap_stage2_range+0x458/0x5f0
[ 758.368954] [<ffff2000080b708c>] kvm_free_stage2_pgd+0x34/0x60
[ 758.374761] [<ffff2000080b2280>] kvm_arch_destroy_vm+0x20/0x68
[ 758.380570] [<ffff2000080aa330>] kvm_put_kvm+0x210/0x358
[ 758.385860] [<ffff2000080aa524>] kvm_vm_release+0x2c/0x40
[ 758.391239] [<ffff2000082ad234>] __fput+0x114/0x2e8
[ 758.396096] [<ffff2000082ad46c>] ____fput+0xc/0x18
[ 758.400869] [<ffff200008104658>] task_work_run+0x108/0x138
[ 758.406332] [<ffff2000080dc8ec>] do_exit+0x48c/0x10e8
[ 758.411363] [<ffff2000080dd5fc>] do_group_exit+0x6c/0x130
[ 758.416739] [<ffff2000080ed924>] get_signal+0x284/0xa18
[ 758.421943] [<ffff20000808a098>] do_signal+0x158/0x860
[ 758.427060] [<ffff20000808aad4>] do_notify_resume+0x6c/0x88
[ 758.432608] [<ffff200008083624>] work_pending+0x10/0x14
[ 758.437812] Code: 9ac32042 8b010001 d1000443 8a230000 (d50b7e20)
This patch fixes the issue by moving the kvm_free_stage2_pgd() to
kvm_arch_flush_shadow_all().
Cc: <stable@vger.kernel.org> # 3.9+
Tested-by: Itaru Kitayama <itaru.kitayama@riken.jp>
Reported-by: Itaru Kitayama <itaru.kitayama@riken.jp>
Reported-by: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Problems with the signal integrity of the high speed USB data lines or
noise on reference ground lines can cause the i.MX6 USB controller to
violate USB specs and exhibit unexpected behavior.
It was observed that USBi_UI interrupts were triggered first and when
isr_setup_status_phase was called, ci->status was NULL, which lead to a
NULL pointer dereference kernel panic.
This patch fixes the kernel panic, emits a warning once and returns
-EPIPE to halt the device and let the host get stalled.
It also adds a comment to point people, who are experiencing this issue,
to their USB hardware design.
Cc: <stable@vger.kernel.org> #4.1+
Signed-off-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
In case of inter address family tunneling (IPv6 over vti4 or IPv4 over
vti6), the inbound policy checks in vti_rcv_cb() and vti6_rcv_cb() are
using the wrong address family. As a result, all inbound inter address
family traffic is dropped.
Use the xfrm_ip2inner_mode() helper, as done in xfrm_input() (i.e., also
increment LINUX_MIB_XFRMINSTATEMODEERROR in case of error), to select the
inner_mode that contains the right address family for the inbound policy
checks.
Signed-off-by: Thomas Zeitlhofer <thomas.zeitlhofer+lkml@ze-it.at>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
When we fail to attach the security context in xfrm_state_construct()
we'll return 0 as error value which, in turn, will wrongly claim success
to userland when, in fact, we won't be adding / updating the XFRM state.
This is a regression introduced by commit fd21150a0f ("[XFRM] netlink:
Inline attach_encap_tmpl(), attach_sec_ctx(), and attach_one_addr()").
Fix it by propagating the error returned by security_xfrm_state_alloc()
in this case.
Fixes: fd21150a0f ("[XFRM] netlink: Inline attach_encap_tmpl()...")
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Jakub Kicinski says:
====================
nfp: fixes and trivial cleanup
First patch drops unnecessary version.h includes. Second one
drops support for pre-release versions of FW ABI. Removing
FW ABI 0.0 from supported set is particularly good since 0
could just be uninitialized memory. Last but not least I drop
unnecessary padding of frames on RX which makes us count bytes
incorrectly for the VF2VF traffic.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Be more strict about FW versions. Drop support for old
transitional revisions which were never used in production.
Dropping support for FW ABI version 0.0.0.0 is particularly
useful because 0 could just be uninitialized memory.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dinan Gunawardena <dinan.gunawardena@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 76174004a0
(tcp: do not slow start when cwnd equals ssthresh )
introduced regression in TCP YeAH. Using 100ms delay 1% loss virtual
ethernet link kernel 4.2 shows bandwidth ~500KB/s for single TCP
connection and kernel 4.3 and above (including 4.8-rc4) shows bandwidth
~100KB/s.
That is caused by stalled cwnd when cwnd equals ssthresh. This patch
fixes it by proper increasing cwnd in this case.
Signed-off-by: Artem Germanov <agermanov@anchorfree.com>
Acked-by: Dmitry Adamushko <d.adamushko@anchorfree.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Saeed Mahameed says:
====================
Mellanox 100G mlx5 fixes 2016-09-07
The following series contains bug fixes for the mlx5e driver.
from Gal,
- Static code checker cleanup (casting overflow)
- Fix global PFC counter statistics reading
- Fix HW LRO when vlan stripping is off
From Bodong,
- Deprecate old autoneg capability bit and use new one.
From Tariq,
- Fix xmit more counter race condition
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently vlan tagged packets were not parsed correctly
and assumed to be regular IPv4/IPv6 packets.
We should check for 802.1Q/802.1ad tags and update the lro header
accordingly.
This fixes the use case where LRO is on and rxvlan is off
(vlan stripping is off).
Fixes: e586b3b0ba ('net/mlx5: Ethernet Datapath files')
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently when reading global PFC statistics we left the counter
iterator out of the equation and we ended up reading the same counter
over and over again.
Instead of reading the counter at index 0 on every iteration we now read
the counter at index (i).
Fixes: e989d5a532 ('net/mlx5e: Expose flow control counters to ethtool')
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On 64 bits architectures unsigned long is longer than u32,
casting to unsigned long will result in overflow.
We need to first allocate an unsigned long variable, then assign the
wanted value.
Fixes: 665bc53969 ('net/mlx5e: Use new ethtool get/set link ksettings API')
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previous an_disable_cap position bit31 is deprecated to be use in driver
with newer firmware. New firmware will advertise the same capability
in bit29.
Old capability didn't allow setting more than one protocol for a
specific speed when autoneg is off, while newer firmware will allow
this and it is indicated in the new capability location.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update the xmit_more counter before notifying the HW,
to prevent a possible use-after-free of the skb.
Fixes: c8cf78fe10 ("net/mlx5e: Add ethtool counter for TX xmit_more")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When DATA and/or FIN are carried in a SYN/ACK message or SYN message,
we append an skb in socket receive queue, but we forget to call
sk_forced_mem_schedule().
Effect is that the socket has a negative sk->sk_forward_alloc as long as
the message is not read by the application.
Josh Hunt fixed a similar issue in commit d22e153718 ("tcp: fix tcp
fin memory accounting")
Fixes: 168a8f5805 ("tcp: TCP Fast Open Server - main code path")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Josh Hunt <johunt@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The cpufreq-stats code can no longer be built as a module, so it now
appears with square brackets in menuconfig.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: 1aefc75b24 (cpufreq: stats: Make the stats code non-modular)
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Depending on a number of factors including:
- Which exact Rockchip SoC we're working with
- How deep we suspend
- Which i2c port we're on
We might lose the state of the i2c registers at suspend time.
Specifically we've found that on rk3399 the i2c ports that are not in
the PMU power domain lose their state with the current suspend depth
configured by ARM Tursted Firmware.
Note that there are very few actual i2c registers that aren't configured
per transfer anyway so all we actually need to re-configure are the
clock config registers. We'll just add a call to rk3x_i2c_adapt_div()
at resume time and be done with it.
NOTE: On rk3399 on ports whose power was lost, I put printouts in at
resume time. I saw things like:
before: con=0x00010300, div=0x00060006
after: con=0x00010200, div=0x00180025
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: David Wu <david.wu@rock-chips.com>
Tested-by: David Wu <david.wu@rock-chips.com>
[wsa: removed duplicate const]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
There are several ways to set the SDA hold time for i2c controller,
including: Device Tree, built-in device properties and ACPI. However,
if the SDA hold time is not specified by above method, we should
read the value, where it is preset by firmware, and save it to
sda_hold_time. This is needed because when i2c controller enters
runtime suspend, the DW_IC_SDA_HOLD value will be reset to chipset
default value. And during runtime resume, i2c_dw_init will be called
to reconfigure i2c controller. If sda_hold_time is zero, the chipset
default hold time will be used, that will be too short for some
platforms. Therefore, to have a better tolerance, the DW_IC_SDA_HOLD
value should be kept by sda_hold_time.
Signed-off-by: Zhuo-hao Lee <zhuo-hao.lee@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Steffen Klassert says:
====================
ipsec 2016-09-08
1) Fix a crash when xfrm_dump_sa returns an error.
From Vegard Nossum.
2) Remove some incorrect WARN() on normal error handling.
From Vegard Nossum.
3) Ignore socket policies when rebuilding hash tables,
socket policies are not inserted into the hash tables.
From Tobias Brunner.
4) Initialize and check tunnel pointers properly before
we use it. From Alexey Kodanev.
5) Fix l3mdev oif setting on xfrm dst lookups.
From David Ahern.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Clock Fixes for the Allwinner SoCs, 4.8 Edition
The usual bunch of fixes to the our clock drivers, mostly targetted to the
brand new sunxi-ng drivers.
* tag 'sunxi-clk-fixes-for-4.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
clk: sunxi-ng: Fix wrong reset register offsets
clk: sunxi-ng: nk: Make ccu_nk_find_best static
clk: sunxi-ng: Fix inverted test condition in ccu_helper_wait_for_lock
clk: sunxi: Fix return value check in sun8i_a23_mbus_setup()
clk: sunxi: pll2: Fix return value check in sun4i_pll2_setup()
Pull ceph fix from Ilya Dryomov:
"A fix for a 4.7 performance regression, caused by a typo in an if
condition"
* tag 'ceph-for-4.8-rc6' of git://github.com/ceph/ceph-client:
ceph: do not modify fi->frag in need_reset_readdir()
Pull dmi fix from Jean Delvare.
* 'dmi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
dmi-id: don't free dev structure after calling device_register
Pull ARM SoC fixes from Olof Johansson:
"This is a slightly larger batch of fixes that we've been sitting on a
few -rcs. Most of them are simple oneliners, but there are two sets
that are slightly larger and worth pointing out:
- A set of patches to OMAP to deal with hwmod for RTC on am33xx
(beaglebone SoC, among others). It's the only clock that ever has
a valid offset of 0, so a new flag needed introduction once this
problem was discovered.
- A collection of CCI fixes for performance counters discovered once
people started using it on X-Gene CPUs"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits)
arm-cci: pmu: Fix typo in event name
Revert "ARM: tegra: fix erroneous address in dts"
ARM: dts: imx6qdl: Fix SPDIF regression
ARM: imx6: add missing BM_CLPCR_BYPASS_PMIC_READY setting for imx6sx
ARM: dts: imx7d-sdb: fix ti,x-plate-ohms property name
ARM: dts: kirkwood: Fix PCIe label on OpenRD
ARM: kirkwood: ib62x0: fix size of u-boot environment partition
bus: arm-ccn: make event groups reliable
bus: arm-ccn: fix hrtimer registration
bus: arm-ccn: fix PMU interrupt flags
ARM: tegra: Correct polarity for Tegra114 PMIC interrupt
MAINTAINERS: add tree entry for ARM/UniPhier architecture
ARM: sun5i: Fix typo in trip point temperature
MAINTAINERS: Switch to kernel.org account for Krzysztof Kozlowski
ARM: imx6ul: populates platform device at .init_machine
bus: arm-ccn: Add missing event attribute exclusions for host/guest
bus: arm-ccn: Correct required arguments for XP PMU events
bus: arm-ccn: Fix XP watchpoint settings bitmask
bus: arm-ccn: Do not attempt to configure XPs for cycle counter
bus: arm-ccn: Fix PMU handling of MN
...
The md-cluster is compiled as module by default,
if it is compiled by built-in way, then we can't
make md-cluster works.
[64782.630008] md/raid1:md127: active with 2 out of 2 mirrors
[64782.630528] md-cluster module not found.
[64782.630530] md127: Could not setup cluster service (-2)
Fixes: edb39c9 ("Introduce md_cluster_operations to handle cluster functions")
Cc: stable@vger.kernel.org (v4.1+)
Reported-by: Marc Smith <marc.smith@mcc.edu>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Make it clear that adding slave support shall not disable master
functionality. We can have both, so we should.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
We can't use a static property for all the changesets, so we now create
dynamic ones for each changeset.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Fixes: 50a5ba8769 ("i2c: mux: demux-pinctrl: add driver")
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
When booting a kvm guest on AMD with the latest kernel the following
messages are displayed in the boot log:
tsc: Unable to calibrate against PIT
tsc: HPET/PMTIMER calibration failed
aa297292d7 ("x86/tsc: Enumerate SKL cpu_khz and tsc_khz via CPUID")
introduced a change to account for a difference in cpu and tsc frequencies for
Intel SKL processors. Before this change the native tsc set
x86_platform.calibrate_tsc to native_calibrate_tsc() which is a hardware
calibration of the tsc, and in tsc_init() executed
tsc_khz = x86_platform.calibrate_tsc();
cpu_khz = tsc_khz;
The kvm code changed x86_platform.calibrate_tsc to kvm_get_tsc_khz() and
executed the same tsc_init() function. This meant that KVM guests did not
execute the native hardware calibration function.
After aa297292d7, there are separate native calibrations for cpu_khz and
tsc_khz. The code sets x86_platform.calibrate_tsc to native_calibrate_tsc()
which is now an Intel specific calibration function, and
x86_platform.calibrate_cpu to native_calibrate_cpu() which is the "old"
native_calibrate_tsc() function (ie, the native hardware calibration
function).
tsc_init() now does
cpu_khz = x86_platform.calibrate_cpu();
tsc_khz = x86_platform.calibrate_tsc();
if (tsc_khz == 0)
tsc_khz = cpu_khz;
else if (abs(cpu_khz - tsc_khz) * 10 > tsc_khz)
cpu_khz = tsc_khz;
The kvm code should not call the hardware initialization in
native_calibrate_cpu(), as it isn't applicable for kvm and it didn't do that
prior to aa297292d7.
This patch resolves this issue by setting x86_platform.calibrate_cpu to
kvm_get_tsc_khz().
v2: I had originally set x86_platform.calibrate_cpu to
cpu_khz_from_cpuid(), however, pbonzini pointed out that the CPUID leaf
in that function is not available in KVM. I have changed the function
pointer to kvm_get_tsc_khz().
Fixes: aa297292d7 ("x86/tsc: Enumerate SKL cpu_khz and tsc_khz via CPUID")
Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: Len Brown <len.brown@intel.com>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: "Christopher S. Hall" <christopher.s.hall@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: kvm@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The STiH4{07,10} platform contains some interconnect clocks which are used
by various IPs. If this clock isn't handled correctly by ST's EHCI/OHCI
drivers, their hub won't be found, the following error be shown and the
result will be non-working USB:
[ 97.221963] hub 2-1:1.0: hub_ext_port_status failed (err = -110)
Cc: stable@vger.kernel.org
Tested-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
When a seq-virmidi driver is initialized, it registers a rawmidi
instance with its callback to create an associated seq kernel client.
Currently it's done throughly in rawmidi's register_mutex context.
Recently it was found that this may lead to a deadlock another rawmidi
device that is being attached with the sequencer is accessed, as both
open with the same register_mutex. This was actually triggered by
syzkaller, as Dmitry Vyukov reported:
======================================================
[ INFO: possible circular locking dependency detected ]
4.8.0-rc1+ #11 Not tainted
-------------------------------------------------------
syz-executor/7154 is trying to acquire lock:
(register_mutex#5){+.+.+.}, at: [<ffffffff84fd6d4b>] snd_rawmidi_kernel_open+0x4b/0x260 sound/core/rawmidi.c:341
but task is already holding lock:
(&grp->list_mutex){++++.+}, at: [<ffffffff850138bb>] check_and_subscribe_port+0x5b/0x5c0 sound/core/seq/seq_ports.c:495
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&grp->list_mutex){++++.+}:
[<ffffffff8147a3a8>] lock_acquire+0x208/0x430 kernel/locking/lockdep.c:3746
[<ffffffff863f6199>] down_read+0x49/0xc0 kernel/locking/rwsem.c:22
[< inline >] deliver_to_subscribers sound/core/seq/seq_clientmgr.c:681
[<ffffffff85005c5e>] snd_seq_deliver_event+0x35e/0x890 sound/core/seq/seq_clientmgr.c:822
[<ffffffff85006e96>] > snd_seq_kernel_client_dispatch+0x126/0x170 sound/core/seq/seq_clientmgr.c:2418
[<ffffffff85012c52>] snd_seq_system_broadcast+0xb2/0xf0 sound/core/seq/seq_system.c:101
[<ffffffff84fff70a>] snd_seq_create_kernel_client+0x24a/0x330 sound/core/seq/seq_clientmgr.c:2297
[< inline >] snd_virmidi_dev_attach_seq sound/core/seq/seq_virmidi.c:383
[<ffffffff8502d29f>] snd_virmidi_dev_register+0x29f/0x750 sound/core/seq/seq_virmidi.c:450
[<ffffffff84fd208c>] snd_rawmidi_dev_register+0x30c/0xd40 sound/core/rawmidi.c:1645
[<ffffffff84f816d3>] __snd_device_register.part.0+0x63/0xc0 sound/core/device.c:164
[< inline >] __snd_device_register sound/core/device.c:162
[<ffffffff84f8235d>] snd_device_register_all+0xad/0x110 sound/core/device.c:212
[<ffffffff84f7546f>] snd_card_register+0xef/0x6c0 sound/core/init.c:749
[<ffffffff85040b7f>] snd_virmidi_probe+0x3ef/0x590 sound/drivers/virmidi.c:123
[<ffffffff833ebf7b>] platform_drv_probe+0x8b/0x170 drivers/base/platform.c:564
......
-> #0 (register_mutex#5){+.+.+.}:
[< inline >] check_prev_add kernel/locking/lockdep.c:1829
[< inline >] check_prevs_add kernel/locking/lockdep.c:1939
[< inline >] validate_chain kernel/locking/lockdep.c:2266
[<ffffffff814791f4>] __lock_acquire+0x4d44/0x4d80 kernel/locking/lockdep.c:3335
[<ffffffff8147a3a8>] lock_acquire+0x208/0x430 kernel/locking/lockdep.c:3746
[< inline >] __mutex_lock_common kernel/locking/mutex.c:521
[<ffffffff863f0ef1>] mutex_lock_nested+0xb1/0xa20 kernel/locking/mutex.c:621
[<ffffffff84fd6d4b>] snd_rawmidi_kernel_open+0x4b/0x260 sound/core/rawmidi.c:341
[<ffffffff8502e7c7>] midisynth_subscribe+0xf7/0x350 sound/core/seq/seq_midi.c:188
[< inline >] subscribe_port sound/core/seq/seq_ports.c:427
[<ffffffff85013cc7>] check_and_subscribe_port+0x467/0x5c0 sound/core/seq/seq_ports.c:510
[<ffffffff85015da9>] snd_seq_port_connect+0x2c9/0x500 sound/core/seq/seq_ports.c:579
[<ffffffff850079b8>] snd_seq_ioctl_subscribe_port+0x1d8/0x2b0 sound/core/seq/seq_clientmgr.c:1480
[<ffffffff84ffe9e4>] snd_seq_do_ioctl+0x184/0x1e0 sound/core/seq/seq_clientmgr.c:2225
[<ffffffff84ffeae8>] snd_seq_kernel_client_ctl+0xa8/0x110 sound/core/seq/seq_clientmgr.c:2440
[<ffffffff85027664>] snd_seq_oss_midi_open+0x3b4/0x610 sound/core/seq/oss/seq_oss_midi.c:375
[<ffffffff85023d67>] snd_seq_oss_synth_setup_midi+0x107/0x4c0 sound/core/seq/oss/seq_oss_synth.c:281
[<ffffffff8501b0a8>] snd_seq_oss_open+0x748/0x8d0 sound/core/seq/oss/seq_oss_init.c:274
[<ffffffff85019d8a>] odev_open+0x6a/0x90 sound/core/seq/oss/seq_oss.c:138
[<ffffffff84f7040f>] soundcore_open+0x30f/0x640 sound/sound_core.c:639
......
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&grp->list_mutex);
lock(register_mutex#5);
lock(&grp->list_mutex);
lock(register_mutex#5);
*** DEADLOCK ***
======================================================
The fix is to simply move the registration parts in
snd_rawmidi_dev_register() to the outside of the register_mutex lock.
The lock is needed only to manage the linked list, and it's not
necessarily to cover the whole initialization process.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a user timer instance is continued without the explicit start
beforehand, the system gets eventually zero-division error like:
divide error: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN
CPU: 1 PID: 27320 Comm: syz-executor Not tainted 4.8.0-rc3-next-20160825+ #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff88003c9b2280 task.stack: ffff880027280000
RIP: 0010:[<ffffffff858e1a6c>] [< inline >] ktime_divns include/linux/ktime.h:195
RIP: 0010:[<ffffffff858e1a6c>] [<ffffffff858e1a6c>] snd_hrtimer_callback+0x1bc/0x3c0 sound/core/hrtimer.c:62
Call Trace:
<IRQ>
[< inline >] __run_hrtimer kernel/time/hrtimer.c:1238
[<ffffffff81504335>] __hrtimer_run_queues+0x325/0xe70 kernel/time/hrtimer.c:1302
[<ffffffff81506ceb>] hrtimer_interrupt+0x18b/0x420 kernel/time/hrtimer.c:1336
[<ffffffff8126d8df>] local_apic_timer_interrupt+0x6f/0xe0 arch/x86/kernel/apic/apic.c:933
[<ffffffff86e13056>] smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:957
[<ffffffff86e1210c>] apic_timer_interrupt+0x8c/0xa0 arch/x86/entry/entry_64.S:487
<EOI>
.....
Although a similar issue was spotted and a fix patch was merged in
commit [6b760bb2c6: ALSA: timer: fix division by zero after
SNDRV_TIMER_IOCTL_CONTINUE], it seems covering only a part of
iceberg.
In this patch, we fix the issue a bit more drastically. Basically the
continue of an uninitialized timer is supposed to be a fresh start, so
we do it for user timers. For the direct snd_timer_continue() call,
there is no way to pass the initial tick value, so we kick out for the
uninitialized case.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
dmi_dev is freed in error exit code but, according to the document
of device_register, it should never directly free device structure
after calling this function, even if it returned an error! Use
put_device() instead.
Signed-off-by: Allen Hung <allen_hung@dell.com>
Signed-off-by: Jean Delvare <jdelvare@suse.de>
The stop endpoint command has its own 5 second timeout timer.
If the timeout function is triggered between USB3 and USB2 host
removal it will try to call usb_hc_died(xhci_to_hcd(xhci)->primary_hcd)
the ->primary_hcd will be set to NULL at USB3 hcd removal.
Fix this by first checking if the PCI host is being removed, and
also by using only xhci_to_hcd() as it will always return the primary
hcd.
CC: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull thermal fix from Zhang Rui:
"Only one patch this time, which fixes a crash in rcar_thermal driver.
From Dirk Behme"
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
thermal: rcar_thermal: Fix priv->zone error handling
For one of the CCI events exposed under sysfs, "snoop" was typo'd as
"snopp". Correct this such that users see the expected event name when
enumerating events via sysfs.
Cc: arm@kernel.org
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
i.MX fixes for 4.8, 2nd round:
- Fix misspelled "ti,x-plate-ohms" property name of touchscreen
controller for imx7d-sdb DTS.
- Add missing BM_CLPCR_BYPASS_PMIC_READY setting for i.MX6SX to get
suspend/resume work properly.
- Fix SPDIF regression on imx6qdl which caused by a clock update on
spdif device node.
* tag 'imx-fixes-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6qdl: Fix SPDIF regression
ARM: imx6: add missing BM_CLPCR_BYPASS_PMIC_READY setting for imx6sx
ARM: dts: imx7d-sdb: fix ti,x-plate-ohms property name
Signed-off-by: Olof Johansson <olof@lixom.net>
This reverts commit b5c86b7496.
This is no longer needed due to other changes going into 4.8 to rename
the unit addresses on a large number of device nodes. So it was picked up
for v4.8-rc1 in error.
Reported-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
In commit c60ac5693c ("powerpc: Update kernel VSID range", 2013-03-13)
we lost a check on the region number (the top four bits of the effective
address) for addresses below PAGE_OFFSET. That commit replaced a check
that the top 18 bits were all zero with a check that bits 46 - 59 were
zero (performed for all addresses, not just user addresses).
This means that userspace can access an address like 0x1000_0xxx_xxxx_xxxx
and we will insert a valid SLB entry for it. The VSID used will be the
same as if the top 4 bits were 0, but the page size will be some random
value obtained by indexing beyond the end of the mm_ctx_high_slices_psize
array in the paca. If that page size is the same as would be used for
region 0, then userspace just has an alias of the region 0 space. If the
page size is different, then no HPTE will be found for the access, and
the process will get a SIGSEGV (since hash_page_mm() will refuse to create
a HPTE for the bogus address).
The access beyond the end of the mm_ctx_high_slices_psize can be at most
5.5MB past the array, and so will be in RAM somewhere. Since the access
is a load performed in real mode, it won't fault or crash the kernel.
At most this bug could perhaps leak a little bit of information about
blocks of 32 bytes of memory located at offsets of i * 512kB past the
paca->mm_ctx_high_slices_psize array, for 1 <= i <= 11.
Fixes: c60ac5693c ("powerpc: Update kernel VSID range")
Cc: stable@vger.kernel.org # v3.9+
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 7aef413656 ("powerpc32: rewrite csum_partial_copy_generic()
based on copy_tofrom_user()") introduced a bug when destination address
is odd and len is lower than cacheline size.
In that case the resulting csum value doesn't have to be rotated one
byte because the cache-aligned copy part is skipped so no alignment
is performed.
Fixes: 7aef413656 ("powerpc32: rewrite csum_partial_copy_generic() based on copy_tofrom_user()")
Cc: stable@vger.kernel.org # v4.6+
Reported-by: Alessio Igor Bogani <alessio.bogani@elettra.eu>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Tested-by: Alessio Igor Bogani <alessio.bogani@elettra.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In pnv_ioda_free_pe(), the PE object (including the associated PE
number) is cleared before resetting the corresponding bit in the
PE allocation bitmap. It means PE#0 is always released to the bitmap
wrongly.
This fixes above issue by caching the PE number before the PE object
is cleared.
Fixes: 1e9167726c ("powerpc/powernv: Use PE instead of number during setup and release"
Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
ucb1x00 has used IRQ probing since it's dawn to find the GPIO interrupt
that it's connected to. However, commit 23393d49fb ("gpio: kill off
set_irq_flags usage") broke this by disabling IRQ probing on GPIO
interrupts. Fix this.
Fixes: 23393d49fb ("gpio: kill off set_irq_flags usage")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This reverts commit 7d4defe21c.
The commit was pointless, manically trembling in the dark for
a solution. The real fixes are:
commit 048c28c91e
("gpio: make any OF dependent driver depend on OF_GPIO")
commit 2527ecc919
("gpio: Fix OF build problem on UM")
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Pull more hardened usercopyfixes from Kees Cook:
- force check_object_size() to be inline too
- move page-spanning check behind a CONFIG since it's triggering false
positives
[ Changed the page-spanning config option to depend on EXPERT in the
merge. That way it still gets build testing, and you can enable it if
you want to, but is never enabled for "normal" configurations ]
* tag 'usercopy-v4.8-rc6-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
usercopy: remove page-spanning test for now
usercopy: force check_object_size() inline
A custom allocator without __GFP_COMP that copies to userspace has been
found in vmw_execbuf_process[1], so this disables the page-span checker
by placing it behind a CONFIG for future work where such things can be
tracked down later.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1373326
Reported-by: Vinson Lee <vlee@freedesktop.org>
Fixes: f5509cc18d ("mm: Hardened usercopy")
Signed-off-by: Kees Cook <keescook@chromium.org>
Just for good measure, make sure that check_object_size() is always
inlined too, as already done for copy_*_user() and __copy_*_user().
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Pull seccomp fixes from Kees Cook:
"Fix UM seccomp vs ptrace, after reordering landed"
* tag 'seccomp-v4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: Remove 2-phase API documentation
um/ptrace: Fix the syscall number update after a ptrace
um/ptrace: Fix the syscall_trace_leave call
ath.git fixes for 4.8. Major changes:
ath10k
* fix racy rx status retrieval from htt context
* QCA9887 support is not experimental anymore, remove the warning message
ath9k
* fix regression with led GPIOs
* fix AR5416 GPIO access warning
Pull hardened usercopy fixes from Kees Cook:
- inline copy_*_user() for correct use of __builtin_const_p() for
hardened usercopy and the recent compile-time checks.
- switch hardened usercopy to only check non-const size arguments to
avoid meaningless checks on likely-sane const values.
- update lkdtm usercopy tests to compenstate for the const checking.
* tag 'usercopy-v4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lkdtm: adjust usercopy tests to bypass const checks
usercopy: fold builtin_const check into inline function
x86/uaccess: force copy_*_user() to be inlined
Update the syscall number after each PTRACE_SETREGS on ORIG_*AX.
This is needed to get the potentially altered syscall number in the
seccomp filters after RET_TRACE.
This fix four seccomp_bpf tests:
> [ RUN ] TRACE_syscall.skip_after_RET_TRACE
> seccomp_bpf.c:1560:TRACE_syscall.skip_after_RET_TRACE:Expected -1 (18446744073709551615) == syscall(39) (26)
> seccomp_bpf.c:1561:TRACE_syscall.skip_after_RET_TRACE:Expected 1 (1) == (*__errno_location ()) (22)
> [ FAIL ] TRACE_syscall.skip_after_RET_TRACE
> [ RUN ] TRACE_syscall.kill_after_RET_TRACE
> TRACE_syscall.kill_after_RET_TRACE: Test exited normally instead of by signal (code: 1)
> [ FAIL ] TRACE_syscall.kill_after_RET_TRACE
> [ RUN ] TRACE_syscall.skip_after_ptrace
> seccomp_bpf.c:1622:TRACE_syscall.skip_after_ptrace:Expected -1 (18446744073709551615) == syscall(39) (26)
> seccomp_bpf.c:1623:TRACE_syscall.skip_after_ptrace:Expected 1 (1) == (*__errno_location ()) (22)
> [ FAIL ] TRACE_syscall.skip_after_ptrace
> [ RUN ] TRACE_syscall.kill_after_ptrace
> TRACE_syscall.kill_after_ptrace: Test exited normally instead of by signal (code: 1)
> [ FAIL ] TRACE_syscall.kill_after_ptrace
Fixes: 26703c636c ("um/ptrace: run seccomp after ptrace")
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: James Morris <jmorris@namei.org>
Cc: user-mode-linux-devel@lists.sourceforge.net
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
This fixes a regression in my previous commit c21377f836 ("nvme:
Suspend all queues before deletion"), which provoked an Oops in the
removal path when removing a device that became IO incapable very early
at probe (i.e. after a failed EEH recovery).
Turns out, if the error occurred very early at the probe path, before
even configuring the admin queue, we might try to suspend the
uninitialized admin queue, accessing bad memory.
Fixes: c21377f836 ("nvme: Suspend all queues before deletion")
Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
A regression was introduced in commit id 79d4db1214 ("ath9k: cleanup
led_pin initial") that broken the WLAN status led on my laptop with
AR9287 after suspending and resuming.
Steps to reproduce:
* Suspend (laptop)
* Resume (laptop)
* Observe that the WLAN led no longer turns ON/OFF depending on the
status and is always red
Even though for my case it only needs to be set to OUT in ath9k_start
but for consistency bring back the IN direction setting as well.
Fixes: 79d4db1214 ("ath9k: cleanup led_pin initial")
Cc: Miaoqing Pan <miaoqing@codeaurora.org>
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: <stable@vger.kernel.org> # 4.7+
Link: https://bugzilla.kernel.org/show_bug.cgi?id=151711
Signed-off-by: Giedrius Statkevičius <giedrius.statkevicius@gmail.com>
[kvalo@qca.qualcomm.com: improve commit log]
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
When calling .import() on a cryptd ahash_request, the structure members
that describe the child transform in the shash_desc need to be initialized
like they are when calling .init()
Cc: stable@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When building a kernel with CONFIG_PM_SLEEP=n, we
get the following warning:
drivers/usb/dwc3/dwc3-pci.c:253:12: warning: 'dwc3_pci_pm_dummy' defined but not used
In order to fix this, we should only define
dwc3_pci_pm_dummy() when CONFIG_PM_SLEEP is defined.
Fixes: f6c274e11e ("usb: dwc3: pci: runtime_resume child device")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
In general, when DAD detected IPv6 duplicate address, ifp->state
will be set to INET6_IFADDR_STATE_ERRDAD and DAD is stopped by a
delayed work, the call tree should be like this:
ndisc_recv_ns
-> addrconf_dad_failure <- missing ifp put
-> addrconf_mod_dad_work
-> schedule addrconf_dad_work()
-> addrconf_dad_stop() <- missing ifp hold before call it
addrconf_dad_failure() called with ifp refcont holding but not put.
addrconf_dad_work() call addrconf_dad_stop() without extra holding
refcount. This will not cause any issue normally.
But the race between addrconf_dad_failure() and addrconf_dad_work()
may cause ifp refcount leak and netdevice can not be unregister,
dmesg show the following messages:
IPv6: eth0: IPv6 duplicate address fe80::XX:XXXX:XXXX:XX detected!
...
unregister_netdevice: waiting for eth0 to become free. Usage count = 1
Cc: stable@vger.kernel.org
Fixes: c15b1ccadb ("ipv6: move DAD and addrconf_verify processing
to workqueue")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a code path where we are calling __iowrite64_copy() on
an address that is not 64-bit aligned. This causes an exception on
some architectures such as arm64. Fix that code path by using
__iowrite32_copy().
Reported-by: JD Zheng <jiandong.zheng@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When deleting an IP address from an interface, there is a clean-up of
routes which refer to this local address. However, there was no check to
see that the VRF matched. This meant that deletion wasn't confined to
the VRF it should have been.
To solve this, a new field has been added to fib_info to hold a table
id. When removing fib entries corresponding to a local ip address, this
table id is also used in the comparison.
The table id is populated when the fib_info is created. This was already
done in some places, but not in ip_rt_ioctl(). This has now been fixed.
Fixes: 021dd3b8a1 ("net: Add routes to the table associated with the device")
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Tested-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Signed-off-by: David S. Miller <davem@davemloft.net>
The build of m32r was giving warning:
In file included from drivers/net/ethernet/smsc/smc91x.c:92:0:
drivers/net/ethernet/smsc/smc91x.h:448:0: warning: "SMC_inb" redefined
#define SMC_inb(ioaddr, reg) ({ BUG(); 0; })
drivers/net/ethernet/smsc/smc91x.h:106:0:
note: this is the location of the previous definition
#define SMC_inb(a, r) inb(((u32)a) + (r))
drivers/net/ethernet/smsc/smc91x.h:449:0: warning: "SMC_outb" redefined
#define SMC_outb(x, ioaddr, reg) BUG()
drivers/net/ethernet/smsc/smc91x.h:108:0:
note: this is the location of the previous definition
#define SMC_outb(v, a, r) outb(v, ((u32)a) + (r))
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
I'm still struggling to get this fix right..
Changes since v2:
- do not blindly modify SKB contents according to Dave's legitimate
objection
Changes since v1:
- dropped disabling HW checksum offload for Zynq
- initialize checksum similar to net/ethernet/freescale/fec_main.c
-- >8 --
MACB/GEM needs the checksum field initialized to 0 to get correct
results on transmit in all cases, e.g. on Zynq, UDP packets with
payload <= 2 otherwise contain a wrong checksums.
Signed-off-by: Helmut Buchsbaum <helmut.buchsbaum@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
An RPC can terminate before its reply arrives, if a credential
problem or a soft timeout occurs. After this happens, xprtrdma
reports it is out of Receive buffers.
A Receive buffer is posted before each RPC is sent, and returned to
the buffer pool when a reply is received. If no reply is received
for an RPC, that Receive buffer remains posted. But xprtrdma tries
to post another when the next RPC is sent.
If this happens a few dozen times, there are no receive buffers left
to be posted at send time. I don't see a way for a transport
connection to recover at that point, and it will spit warnings and
unnecessarily delay RPCs on occasion for its remaining lifetime.
Commit 1e465fd4ff ("xprtrdma: Replace send and receive arrays")
removed a little bit of logic to detect this case and not provide
a Receive buffer so no more buffers are posted, and then transport
operation continues correctly. We didn't understand what that logic
did, and it wasn't commented, so it was removed as part of the
overhaul to support backchannel requests.
Restore it, but be wary of the need to keep extra Receives posted
to deal with backchannel requests.
Fixes: 1e465fd4ff ("xprtrdma: Replace send and receive arrays")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Receive buffer exhaustion, if it were to actually occur, would be
catastrophic. However, when there are no reply buffers to post, that
means all of them have already been posted and are waiting for
incoming replies. By design, there can never be more RPCs in flight
than there are available receive buffers.
A receive buffer can be left posted after an RPC exits without a
received reply; say, due to a credential problem or a soft timeout.
This does not result in fewer posted receive buffers than there are
pending RPCs, and there is already logic in xprtrdma to deal
appropriately with this case.
It also looks like the "+ 2" that was removed was accidentally
accommodating the number of extra receive buffers needed for
receiving backchannel requests. That will need to be addressed by
another patch.
Fixes: 3d4cf35bd4 ("xprtrdma: Reply buffer exhaustion can be...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Neither the failure or success paths of ping_v6_sendmsg release
the dst it acquires. This leads to a flood of warnings from
"net/core/dst.c:288 dst_release" on older kernels that
don't have 8bf4ada2e2 backported.
That patch optimistically hoped this had been fixed post 3.10, but
it seems at least one case wasn't, where I've seen this triggered
a lot from machines doing unprivileged icmp sockets.
Cc: Martin Lau <kafai@fb.com>
Signed-off-by: Dave Jones <davej@codemonkey.org.uk>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull rdma fixes from Doug Ledford:
"This is the second pull request for the rdma subsystem. Most of the
patches are small and obvious. I took two patches in that are larger
than I wanted this late in the cycle.
The first is the hfi1 patch that implements a work queue to test the
QSFP read state. I originally rejected the first patch for this
(which would have place up to 20 seconds worth of udelays in their
probe routine). They then rewrote it the way I wanted (use delayed
work tasks to wait asynchronously up to 20 seconds for the QSFP to
come alive), so I can't really complain about the size of getting what
I asked for :-/.
The second is large because it switches the rcu locking in the debugfs
code. Since a locking change like this is done all at once, the size
it what it is. It resolves a litany of debug messages from the
kernel, so I pulled it in for -rc.
The rest are all typical -rc worthy patches I think.
There will still be a third -rc pull request from the rdma subsystem
this release. I hope to have that one ready to go by the end of this
week or early next.
Summary:
- a smattering of small fixes across the core, ipoib, i40iw, isert,
cxgb4, and mlx4
- a slightly larger group of fixes to each of mlx5 and hfi1"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/hfi1: Rework debugfs to use SRCU
IB/hfi1: Make n_krcvqs be an unsigned long integer
IB/hfi1: Add QSFP sanity pre-check
IB/hfi1: Fix AHG KDETH Intr shift
IB/hfi1: Fix SGE length for misaligned PIO copy
IB/mlx5: Don't return errors from poll_cq
IB/mlx5: Use TIR number based on selector
IB/mlx5: Simplify code by removing return variable
IB/mlx5: Return EINVAL when caller specifies too many SGEs
IB/mlx4: Don't return errors from poll_cq
Revert "IB/mlx4: Return EAGAIN for any error in mlx4_ib_poll_one"
IB/ipoib: Fix memory corruption in ipoib cm mode connect flow
IB/core: Fix use after free in send_leave function
IB/cxgb4: Make _free_qp static to silence build warning
IB/isert: Properly release resources on DEVICE_REMOVAL
IB/hfi1: Fix the size parameter to find_first_bit
IB/mlx5: Fix the size parameter to find_first_bit
IB/hfi1: Clean up type used and casting
i40iw: Receive notification events correctly
i40iw: Update hw_iwarp_state
The hardened usercopy is now consistently avoiding checks against const
sizes, since we really only want to perform runtime bounds checking
on lengths that weren't known at build time. To test the hardened usercopy
code, we must force the length arguments to be seen as non-const.
Signed-off-by: Kees Cook <keescook@chromium.org>
Instead of having each caller of check_object_size() need to remember to
check for a const size parameter, move the check into check_object_size()
itself. This actually matches the original implementation in PaX, though
this commit cleans up the now-redundant builtin_const() calls in the
various architectures.
Signed-off-by: Kees Cook <keescook@chromium.org>
As already done with __copy_*_user(), mark copy_*_user() as __always_inline.
Without this, the checks for things like __builtin_const_p() won't work
consistently in either hardened usercopy nor the recent adjustments for
detecting usercopy overflows at compile time.
The change in kernel text size is detectable, but very small:
text data bss dec hex filename
12118735 5768608 14229504 32116847 1ea106f vmlinux.before
12120207 5768608 14229504 32118319 1ea162f vmlinux.after
Signed-off-by: Kees Cook <keescook@chromium.org>
Pull mailbox fixes from Jassi Brar:
"Misc fixes for BCM mailbox driver
- Fix build warnings by making static functions used within the file.
- Check for potential NULL before dereferencing
- Fix link error by defining HAS_DMA dependency"
* 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
fix:mailbox:bcm-pdc-mailbox:mark symbols static where possible
mailbox: bcm-pdc: potential NULL dereference in pdc_shutdown()
mailbox: Add HAS_DMA Kconfig dependency to BCM_PDC_MBOX
Pull SCSI fixes from James Bottomley:
"This is really three fixes, but the SES one comes in a bundle of three
(making the replacement API available properly, using it and removing
the non-working one). The SES problem causes an oops on hpsa devices
because they attach virtual disks to the host which aren't SAS
attached (the replacement API ignores them).
The other two fixes are fairly minor: the sense key one means we
actually resolve a newly added sense key and the RDAC device
blacklisting is needed to prevent us annoying the universal XPORT lun
of various RDAC arrays"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: sas: remove is_sas_attached()
scsi: ses: use scsi_is_sas_rphy instead of is_sas_attached
scsi: sas: provide stub implementation for scsi_is_sas_rphy
scsi: blacklist all RDAC devices for BLIST_NO_ULD_ATTACH
scsi: fix upper bounds check of sense key in scsi_sense_key_string()
Pull regmap fixes from Mark Brown:
"Several fixes here, the main one being the change from Lars-Peter
which I'd been letting soak in -next since the merge window in case it
uncovered further issues as it's a minimal fix rather than a change
addressing the root cause of the problems (which would've been too
invasive for -rc):
- The biggest change is a fix from Lars-Peter to ensure that we don't
create overlapping rbtree nodes which in turn avoids returning
corrupt cache values to users, fixing some issues that were exposed
by some recent optimisations with certain access patterns but had
been present for a long time.
- A fix from Elaine Zhang to stop us updating the cache if we get an
I/O error when writing to the hardware.
- A fix fromm Maarten ter Huurne to avoid uninitialized defaults in
cases where we have non-readable registers but are initializing the
cache by reading from the device"
* tag 'regmap-fix-v4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: drop cache if the bus transfer error
regmap: rbtree: Avoid overlapping nodes
regmap: cache: Fix num_reg_defaults computation from reg_defaults_raw
Pull spi fixes from Mark Brown:
"As well as the usual driver fixes there's a couple of non-trivial core
fixes in here:
- Fixes for issues reported by Julia Lawall in the changes that were
sent last time to fix interaction between the bus lock and the
locking done for the SPI thread. I'd let this one cook for a while
to make sure nothing else came up in testing.
- A fix from Sien Wu for arithmetic overflows when calculating the
timeout for larger transfers (espcially common with slow buses with
flashes on them)"
* tag 'spi-fix-v4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Prevent unexpected SPI time out due to arithmetic overflow
spi: pxa2xx-pci: fix ACPI-based enumeration of SPI devices
MAINTAINERS: add myself as Samsung SPI maintainer
spi: Drop io_mutex in error paths
spi: sh-msiof: Avoid invalid clock generator parameters
spi: img-spfi: Remove spi_master_put in img_spfi_remove()
spi: mediatek: remove spi_master_put in mtk_spi_remove()
spi: qup: Remove spi_master_put in spi_qup_remove()
Pull regulator fixes from Mark Brown:
"Two things here, one an e-mail update for Krzysztof Kozlowski and the
other a couple of fixes for issues with incorrectly described voltages
in a couple of the Qualcomm regulator drivers that were breaking MMC
on some platforms"
* tag 'regulator-fix-v4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Change Krzysztof Kozlowski's email to kernel.org
regulator: qcom_smd: Fix voltage ranges for pma8084 ftsmps and pldo
regulator: qcom_smd: Fix voltage ranges for pm8x41
Pull pin control fixes from Linus Walleij:
"Nothing special at all, just three SoC-specific driver fixes:
- Fix routing problems in pistachio (Imagination) and sunxi
(AllWinner)
- Fix an interrupt problem in the Cherryview (Intel)"
* tag 'pinctrl-v4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: sunxi: fix uart1 CTS/RTS pins at PG on A23/A33
pinctrl: cherryview: Do not mask all interrupts in probe
pinctrl: pistachio: fix mfio pll_lock pinmux
Imagine such situation, user add the following nft rules, and queue
the packets to userspace for further check:
# ip rule add fwmark 0x0/0x1 lookup eth0
# ip rule add fwmark 0x1/0x1 lookup eth1
# nft add table filter
# nft add chain filter output {type route hook output priority 0 \;}
# nft add rule filter output mark set 0x1
# nft add rule filter output queue num 0
But after we reinject the skbuff, the packet will be sent via the
wrong route, i.e. in this case, the packet will be routed via eth0
table, not eth1 table. Because we skip to do re-route when verdict
is NF_QUEUE, even if the mark was changed.
Acctually, we should not touch sk_buff if verdict is NF_DROP or
NF_STOLEN, and when re-route fails, return NF_DROP with error code.
This is consistent with the mangle table in iptables.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In btrfs_async_reclaim_metadata_space(), we use ticket's address to
determine whether asynchronous metadata reclaim work is making progress.
ticket = list_first_entry(&space_info->tickets,
struct reserve_ticket, list);
if (last_ticket == ticket) {
flush_state++;
} else {
last_ticket = ticket;
flush_state = FLUSH_DELAYED_ITEMS_NR;
if (commit_cycles)
commit_cycles--;
}
But indeed it's wrong, we should not rely on local variable's address to
do this check, because addresses may be same. In my test environment, I
dd one 168MB file in a 256MB fs, found that for this file, every time
wait_reserve_ticket() called, local variable ticket's address is same,
For above codes, assume a previous ticket's address is addrA, last_ticket
is addrA. Btrfs_async_reclaim_metadata_space() finished this ticket and
wake up it, then another ticket is added, but with the same address addrA,
now last_ticket will be same to current ticket, then current ticket's flush
work will start from current flush_state, not initial FLUSH_DELAYED_ITEMS_NR,
which may result in some enospc issues(I have seen this in my test machine).
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We use a btrfs_log_ctx structure to pass information into the
tree log commit, and get error values out. It gets added to a per
log-transaction list which we walk when things go bad.
Commit d1433debe added an optimization to skip waiting for the log
commit, but didn't take root_log_ctx out of the list. This
patch makes sure we remove things before exiting.
Signed-off-by: Chris Mason <clm@fb.com>
Fixes: d1433debe7
cc: stable@vger.kernel.org # 3.15+
The atmel_hlcdc_crtc_reset() function is never used outside the file and
can be static. This avoids a warning from sparse.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The code is applying the same scaling for the X and Y components,
thus making the scaling feature only functional when both components
have the same scaling factor.
Do the s/_w/_h/ replacement where appropriate to fix vertical scaling.
Signed-off-by: Jan Leupold <leupold@rsi-elektrotechnik.de>
Fixes: 1a396789f6 ("drm: add Atmel HLCDC Display Controller support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
In case thermal_zone_xxx_register() returns an error, priv->zone
isn't NULL any more, but contains the error code.
This is passed to thermal_zone_device_unregister(), then. This checks
for priv->zone being NULL, but the error code is != NULL. So it works
with the error code as a pointer. Crashing immediately.
To fix this, reset priv->zone to NULL before entering
rcar_gen3_thermal_remove().
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
We're trying hard to detect when the HYP idmap overlaps with the
HYP va, as it makes the teardown of a cpu dangerous. But there is
one case where an overlap is completely safe, which is when the
whole of the kernel is idmap'ed, which is likely to happen on 32bit
when RAM is at 0x8000000 and we're using a 2G/2G VA split.
In that case, we can proceed safely.
Reported-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Yanqiu Zhang reported kernel panic when using mbm event
on system where CQM is detected but without mbm event
support, like with perf:
# perf stat -e 'intel_cqm/event=3/' -a
BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
IP: [<ffffffff8100d64c>] update_sample+0xbc/0xe0
...
<IRQ>
[<ffffffff8100d688>] __intel_mbm_event_init+0x18/0x20
[<ffffffff81113d6b>] flush_smp_call_function_queue+0x7b/0x160
[<ffffffff81114853>] generic_smp_call_function_single_interrupt+0x13/0x60
[<ffffffff81052017>] smp_call_function_interrupt+0x27/0x40
[<ffffffff816fb06c>] call_function_interrupt+0x8c/0xa0
...
The reason is that we currently allow to init mbm event
even if mbm support is not detected. Adding checks for
both cqm and mbm events and support into cqm's event_init.
Fixes: 33c3cc7acf ("perf/x86/mbm: Add Intel Memory B/W Monitoring enumeration and init")
Reported-by: Yanqiu Zhang <yanqzhan@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Vikas Shivappa <vikas.shivappa@linux.intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1473089407-21857-1-git-send-email-jolsa@kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
An earlier fix partially fixed the null pointer dereference on skb->len
by moving the assignment of len after the check on skb being non-null,
however it failed to remove the erroneous dereference when assigning len.
Correctly fix this by removing the initialisation of len as was
originally intended.
Fixes: 70237dc8ef ("usb: gadget: function: f_eem: socket buffer may be NULL")
Acked-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
The compound PE is created to accommodate the devices attached to
one specific PCI bus that consume multiple M64 segments. The compound
PE is made up of one master PE and possibly multiple slave PEs. The
slave PEs should be destroyed when releasing the master PE. A kernel
crash happens when derferencing @pe->pdev on releasing the slave PE
in pnv_ioda_deconfigure_pe().
# echo 0 > /sys/bus/pci/slots/C7/power
iommu: Removing device 0000:01:00.1 from group 0
iommu: Removing device 0000:01:00.0 from group 0
Unable to handle kernel paging request for data at address 0x00000010
Faulting instruction address: 0xc00000000005d898
cpu 0x1: Vector: 300 (Data Access) at [c000000fe8217620]
pc: c00000000005d898: pnv_ioda_release_pe+0x288/0x610
lr: c00000000005dbdc: pnv_ioda_release_pe+0x5cc/0x610
sp: c000000fe82178a0
msr: 9000000000009033
dar: 10
dsisr: 40000000
current = 0xc000000fe815ab80
paca = 0xc00000000ff00400 softe: 0 irq_happened: 0x01
pid = 2709, comm = sh
Linux version 4.8.0-rc5-gavin-00006-g745efdb (gwshan@gwshan) \
(gcc version 4.9.3 (Buildroot 2016.02-rc2-00093-g5ea3bce) ) #586 SMP \
Tue Sep 6 13:37:29 AEST 2016
enter ? for help
[c000000fe8217940] c00000000005d684 pnv_ioda_release_pe+0x74/0x610
[c000000fe82179e0] c000000000034460 pcibios_release_device+0x50/0x70
[c000000fe8217a10] c0000000004aba80 pci_release_dev+0x50/0xa0
[c000000fe8217a40] c000000000704898 device_release+0x58/0xf0
[c000000fe8217ac0] c000000000470510 kobject_release+0x80/0xf0
[c000000fe8217b00] c000000000704dd4 put_device+0x24/0x40
[c000000fe8217b20] c0000000004af94c pci_remove_bus_device+0x12c/0x150
[c000000fe8217b60] c000000000034244 pci_hp_remove_devices+0x94/0xd0
[c000000fe8217ba0] c0000000004ca444 pnv_php_disable_slot+0x64/0xb0
[c000000fe8217bd0] c0000000004c88c0 power_write_file+0xa0/0x190
[c000000fe8217c50] c0000000004c248c pci_slot_attr_store+0x3c/0x60
[c000000fe8217c70] c0000000002d6494 sysfs_kf_write+0x94/0xc0
[c000000fe8217cb0] c0000000002d50f0 kernfs_fop_write+0x180/0x260
[c000000fe8217d00] c0000000002334a0 __vfs_write+0x40/0x190
[c000000fe8217d90] c000000000234738 vfs_write+0xc8/0x240
[c000000fe8217de0] c000000000236250 SyS_write+0x60/0x110
[c000000fe8217e30] c000000000009524 system_call+0x38/0x108
It fixes the kernel crash by bypassing releasing resources (DMA,
IO and memory segments, PELTM) because there are no resources assigned
to the slave PE.
Fixes: c5f7700bbd ("powerpc/powernv: Dynamically release PE")
Reported-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When using the OPAL ICP backend we incorrectly pass Linux CPU numbers
rather than HW CPU numbers to OPAL.
Fixes: d74361881f ("powerpc/xics: Add ICP OPAL backend")
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On ppc64le, builds with CONFIG_KEXEC=n fail with:
arch/powerpc/platforms/pseries/setup.c: In function ‘pseries_big_endian_exceptions’:
arch/powerpc/platforms/pseries/setup.c:403:13: error: implicit declaration of function ‘kdump_in_progress’
if (rc && !kdump_in_progress())
This is because pseries/setup.c includes <linux/kexec.h>, but
kdump_in_progress() is defined in <asm/kexec.h>. This is a problem
because the former only includes the latter if CONFIG_KEXEC_CORE=y.
Fix it by including <asm/kexec.h> directly, as is done in powernv/setup.c.
Fixes: d3cbff1b5a ("powerpc: Put exception configuration in a common place")
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
7985e7c100 ("iio: Introduce a new fractional value type") introduced a
new IIO_VAL_FRACTIONAL value type meant to represent rational type numbers
expressed by a numerator and denominator combination.
Formating of IIO_VAL_FRACTIONAL values relies upon do_div() usage. This
fails handling negative values properly since parameters are reevaluated
as unsigned values.
Fix this by using div_s64_rem() instead. Computed integer part will carry
properly signed value. Formatted fractional part will always be positive.
Fixes: 7985e7c100 ("iio: Introduce a new fractional value type")
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
A recent fix to iio_buffer_read_first_n_outer removed ret from being set by
a return from wait_event_interruptible and also added a continue in a loop
which causes the variable ret to not be set when it reaches the end of the
loop. Fix this by initializing ret to zero.
Also remove extraneous white space at the end of the loop.
Fixes: fcf68f3c0b ("fix sched WARNING "do not call blocking ops when !TASK_RUNNING")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Pull crypto fixes from Herbert Xu:
"This fixes a regression in the cryptd code that breaks certain
accelerated AED algorithms as well as an older regression in the
caam driver that breaks IPsec"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: caam - fix IV loading for authenc (giv)decryption
crypto: cryptd - Use correct tfm object for AEAD tracking
Pull kbuild fix from Michal Marek:
"Fix for 'make deb-pkg'. The bug got introduced in v4.8-rc1"
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
builddeb: Skip gcc-plugins when not configured
NFTA_TRACE_POLICY attribute is big endian, but we forget to call
htonl to convert it. Fortunately, this attribute is parsed as big
endian in libnftnl.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When replaying extents, there is no need to update bytes_may_use
in btrfs_alloc_logged_file_extent(), otherwise it'll trigger a
WARN_ON about bytes_may_use.
Fixes: ("btrfs: update btrfs_space_info's bytes_may_use timely")
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
* Make for_each_efi_memory_desc_in_map() safe on Xen and prevent an
infinte loop - Jan Beulich
* Fix boot error on arm64 Qualcomm platforms by refactoring and
improving the ExitBootServices() hack we already for x86 and moving
it to the libstub - Jeffrey Hugo
* Use correct return data type for of_get_flat_dt_subnode_by_name()
so that we correctly handle errors - Andrzej Hajda
TSC_OFFSET will be adjusted if discovers TSC backward during vCPU load.
The preemption timer, which relies on the guest tsc to reprogram its
preemption timer value, is also reprogrammed if vCPU is scheded in to
a different pCPU. However, the current implementation reprogram preemption
timer before TSC_OFFSET is adjusted to the right value, resulting in the
preemption timer firing prematurely.
This patch fix it by adjusting TSC_OFFSET before reprogramming preemption
timer if TSC backward.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krċmář <rkrcmar@redhat.com>
Cc: Yunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
of_clk_init() ends up calling into pm_qos_update_request() very early
during boot where irq is expected to stay disabled.
pm_qos_update_request() uses cancel_delayed_work_sync() which
correctly assumes that irq is enabled on invocation and
unconditionally disables and re-enables it.
Gate cancel_delayed_work_sync() invocation with kevented_up() to avoid
enabling irq unexpectedly during early boot.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-and-tested-by: Qiao Zhou <qiaozhou@asrmicro.com>
Link: http://lkml.kernel.org/r/d2501c4c-8e7b-bea3-1b01-000b36b5dfe9@asrmicro.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit f3c4ebe65e ("ceph: using hash value to compose dentry offset")
modified "if (fpos_frag(new_pos) != fi->frag)" to "if (fi->frag |=
fpos_frag(new_pos))" in need_reset_readdir(), thus replacing a
comparison operator with an assignment one.
This looks like a typo which is reported by clang when building the
kernel with some warning flags:
fs/ceph/dir.c:600:22: error: using the result of an assignment as a
condition without parentheses [-Werror,-Wparentheses]
} else if (fi->frag |= fpos_frag(new_pos)) {
~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
fs/ceph/dir.c:600:22: note: place parentheses around the assignment
to silence this warning
} else if (fi->frag |= fpos_frag(new_pos)) {
^
( )
fs/ceph/dir.c:600:22: note: use '!=' to turn this compound
assignment into an inequality comparison
} else if (fi->frag |= fpos_frag(new_pos)) {
^~
!=
Fixes: f3c4ebe65e ("ceph: using hash value to compose dentry offset")
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Workdir creation fails in latest kernel.
Fix by allowing EOPNOTSUPP as a valid return value from
vfs_removexattr(XATTR_NAME_POSIX_ACL_*). Upper filesystem may not support
ACL and still be perfectly able to support overlayfs.
Reported-by: Martin Ziegler <ziegler@uni-freiburg.de>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Fixes: c11b9fdd6a ("ovl: remove posix_acl_default from workdir")
Cc: <stable@vger.kernel.org>
We store the address of riccbd at the wrong location, overwriting
gvrd. This means that our nested guest will not be able to use runtime
instrumentation. Also, a memory leak, if our KVM guest actually sets gvrd.
Not noticed until now, as KVM guests never make use of gvrd and runtime
instrumentation wasn't completely tested yet.
Reported-by: Fan Zhang <zhangfan@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The eboot code directly calls ExitBootServices. This is inadvisable as the
UEFI spec details a complex set of errors, race conditions, and API
interactions that the caller of ExitBootServices must get correct. The
eboot code attempts allocations after calling ExitBootSerives which is
not permitted per the spec. Call the efi_exit_boot_services() helper
intead, which handles the allocation scenario properly.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
The FDT code directly calls ExitBootServices. This is inadvisable as the
UEFI spec details a complex set of errors, race conditions, and API
interactions that the caller of ExitBootServices must get correct. The
FDT code does not handle EFI_INVALID_PARAMETER as required by the spec,
which causes intermittent boot failures on the Qualcomm Technologies
QDF2432. Call the efi_exit_boot_services() helper intead, which handles
the EFI_INVALID_PARAMETER scenario properly.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
The spec allows ExitBootServices to fail with EFI_INVALID_PARAMETER if a
race condition has occurred where the EFI has updated the memory map after
the stub grabbed a reference to the map. The spec defines a retry
proceedure with specific requirements to handle this scenario.
This scenario was previously observed on x86 - commit d3768d885c ("x86,
efi: retry ExitBootServices() on failure") but the current fix is not spec
compliant and the scenario is now observed on the Qualcomm Technologies
QDF2432 via the FDT stub which does not handle the error and thus causes
boot failures. The user will notice the boot failure as the kernel is not
executed and the system may drop back to a UEFI shell, but will be
unresponsive to input and the system will require a power cycle to recover.
Add a helper to the stub library that correctly adheres to the spec in the
case of EFI_INVALID_PARAMETER from ExitBootServices and can be universally
used across all stub implementations.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
efi_get_memory_map() allocates a buffer to store the memory map that it
retrieves. This buffer may need to be reused by the client after
ExitBootServices() is called, at which point allocations are not longer
permitted. To support this usecase, provide the allocated buffer size back
to the client, and allocate some additional headroom to account for any
reasonable growth in the map that is likely to happen between the call to
efi_get_memory_map() and the client reusing the buffer.
Signed-off-by: Jeffrey Hugo <jhugo@codeaurora.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
The previous driver is possible to stop the transfer wrongly.
For example:
1) An interrupt happens, but not BRDY interruption.
2) Read INTSTS0. And than state->intsts0 is not set to BRDY.
3) BRDY is set to 1 here.
4) Read BRDYSTS.
5) Clear the BRDYSTS. And then. the BRDY is cleared wrongly.
Remarks:
- The INTSTS0.BRDY is read only.
- If any bits of BRDYSTS are set to 1, the BRDY is set to 1.
- If BRDYSTS is 0, the BRDY is set to 0.
So, this patch adds condition to avoid such situation. (And about
NRDYSTS, this is not used for now. But, avoiding any side effects,
this patch doesn't touch it.)
Fixes: d5c6a1e024 ("usb: renesas_usbhs: fixup interrupt status clear method")
Cc: <stable@vger.kernel.org> # v3.8+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
clk_prepare_enable() may fail, so we should better check its return
value and propagate it in the case of failure.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
This driver should clear the bit. Otherwise, the VBUS will output
wrongly if the usb port on a board has VBUS output capability.
Fixes: 746bfe63bb ("usb: gadget: renesas_usb3: add support for
Renesas USB3.0 peripheral controller")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
This reverts commit 6f8245b4e3 ("usb: dwc3: gadget: always decrement
by 1").
We can't always decrement this value.
We should decrement only if the calculation of free slots results in a
LINK TRB being among one of the free slots (dequeue < enqueue).
Otherwise, if the LINK TRB is not among the free slots then it should
not be decremented.
Signed-off-by: John Youn <johnyoun@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
The origin of the issue I've seen is related to
a missing memory barrier between check for task->state and
the check for task->on_rq.
The task being woken up is already awake from a schedule()
and is doing the following:
do {
schedule()
set_current_state(TASK_(UN)INTERRUPTIBLE);
} while (!cond);
The waker, actually gets stuck doing the following in
try_to_wake_up():
while (p->on_cpu)
cpu_relax();
Analysis:
The instance I've seen involves the following race:
CPU1 CPU2
while () {
if (cond)
break;
do {
schedule();
set_current_state(TASK_UN..)
} while (!cond);
wakeup_routine()
spin_lock_irqsave(wait_lock)
raw_spin_lock_irqsave(wait_lock) wake_up_process()
} try_to_wake_up()
set_current_state(TASK_RUNNING); ..
list_del(&waiter.list);
CPU2 wakes up CPU1, but before it can get the wait_lock and set
current state to TASK_RUNNING the following occurs:
CPU3
wakeup_routine()
raw_spin_lock_irqsave(wait_lock)
if (!list_empty)
wake_up_process()
try_to_wake_up()
raw_spin_lock_irqsave(p->pi_lock)
..
if (p->on_rq && ttwu_wakeup())
..
while (p->on_cpu)
cpu_relax()
..
CPU3 tries to wake up the task on CPU1 again since it finds
it on the wait_queue, CPU1 is spinning on wait_lock, but immediately
after CPU2, CPU3 got it.
CPU3 checks the state of p on CPU1, it is TASK_UNINTERRUPTIBLE and
the task is spinning on the wait_lock. Interestingly since p->on_rq
is checked under pi_lock, I've noticed that try_to_wake_up() finds
p->on_rq to be 0. This was the most confusing bit of the analysis,
but p->on_rq is changed under runqueue lock, rq_lock, the p->on_rq
check is not reliable without this fix IMHO. The race is visible
(based on the analysis) only when ttwu_queue() does a remote wakeup
via ttwu_queue_remote. In which case the p->on_rq change is not
done uder the pi_lock.
The result is that after a while the entire system locks up on
the raw_spin_irqlock_save(wait_lock) and the holder spins infintely
Reproduction of the issue:
The issue can be reproduced after a long run on my system with 80
threads and having to tweak available memory to very low and running
memory stress-ng mmapfork test. It usually takes a long time to
reproduce. I am trying to work on a test case that can reproduce
the issue faster, but thats work in progress. I am still testing the
changes on my still in a loop and the tests seem OK thus far.
Big thanks to Benjamin and Nick for helping debug this as well.
Ben helped catch the missing barrier, Nick caught every missing
bit in my theory.
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
[ Updated comment to clarify matching barriers. Many
architectures do not have a full barrier in switch_to()
so that cannot be relied upon. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicholas Piggin <nicholas.piggin@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/e02cce7b-d9ca-1ad0-7a61-ea97c7582b37@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
My previous commit:
112dc0c806 ("locking/barriers: Suppress sparse warnings in lockless_dereference()")
caused sparse to complain that (in radix-tree.h) we use sizeof(void)
since that rcu_dereference()s a void *.
Really, all we need is to have the expression *p in here somewhere
to make sure p is a pointer type, and sizeof(*p) was the thing that
came to my mind first to make sure that's done without really doing
anything at runtime.
Another thing I had considered was using typeof(*p), but obviously
we can't just declare a typeof(*p) variable either, since that may
end up being void. Declaring a variable as typeof(*p)* gets around
that, and still checks that typeof(*p) is valid, so do that. This
type construction can't be done for _________p1 because that will
actually be used and causes sparse address space warnings, so keep
a separate unused variable for it.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kbuild-all@01.org
Fixes: 112dc0c806 ("locking/barriers: Suppress sparse warnings in lockless_dereference()")
Link: http://lkml.kernel.org/r/1472192160-4049-1-git-send-email-johannes@sipsolutions.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 833f2cbf70 ("ARM: dts: imx6: change the core clock of spdif")
changed many more clocks than only the SPDIF core clock as stated in
the commit message.
The MLB clock has been added and this causes SPDIF regression as
reported by Xavi Drudis Ferran and also in this forum post:
https://forum.digikey.com/thread/34240
The MX6Q Reference Manual does not mention that MLB is a clock related
to SPDIF, so change it back to a dummy clock to restore SPDIF
functionality.
Thanks to Ambika for providing the fix at:
https://community.nxp.com/thread/387131
Fixes: 833f2cbf70 ("ARM: dts: imx6: change the core clock of spdif")
Cc: <stable@vger.kernel.org> # 4.4.x
Reported-by: Xavi Drudis Ferran <xdrudis@tinet.cat>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Xavi Drudis Ferran <xdrudis@tinet.cat>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Right now we use the 'readlock' both for protecting some of the af_unix
IO path and for making the bind be single-threaded.
The two are independent, but using the same lock makes for a nasty
deadlock due to ordering with regards to filesystem locking. The bind
locking would want to nest outside the VSF pathname locking, but the IO
locking wants to nest inside some of those same locks.
We tried to fix this earlier with commit c845acb324 ("af_unix: Fix
splice-bind deadlock") which moved the readlock inside the vfs locks,
but that caused problems with overlayfs that will then call back into
filesystem routines that take the lock in the wrong order anyway.
Splitting the locks means that we can go back to having the bind lock be
the outermost lock, and we don't have any deadlocks with lock ordering.
Acked-by: Rainer Weikusat <rweikusat@cyberadapt.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit c845acb324.
It turns out that it just replaces one deadlock with another one: we can
still get the wrong lock ordering with the readlock due to overlayfs
calling back into the filesystem layer and still taking the vfs locks
after the readlock.
The proper solution ends up being to just split the readlock into two
pieces: the bind lock (taken *outside* the vfs locks) and the IO lock
(taken *inside* the filesystem locks). The two locks are independent
anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Benc says:
====================
vxlan: fix error reporting
This patchset improves checking for invalid configuration in VXLAN and
fixes problems with duplicated and inappropriate error messages.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
vxlan_dev_configure outputs error messages before returning, no need to
print again the same mesages in vxlan_newlink. Also, vxlan_dev_configure may
return a particular error code for a different reason than vxlan_newlink
thinks.
Move the remaining error messages into vxlan_dev_configure and let
vxlan_newlink just pass on the error code.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, kernel accepts configurations such as:
ip l a type vxlan dstport 4789 id 1 group 239.192.0.1
ip l a type vxlan dstport 4789 id 1 group ff0e::110
However, neither of those really works. In the IPv4 case, the interface
cannot be brought up ("RTNETLINK answers: No such device"). This is because
multicast join will be rejected without the interface being specified.
In the IPv6 case, multicast wil be joined on the first interface found. This
is not what the user wants as it depends on random factors (order of
interfaces).
Note that it's possible to add a local address but it doesn't solve
anything. For IPv4, it's not considered in the multicast join (thus the same
error as above is returned on ifup). This could be added but it wouldn't
help for IPv6 anyway. For IPv6, we do need the interface.
Just reject a configuration that sets multicast address and does not provide
an interface. Nobody can depend on the previous behavior as it never worked.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Following few steps will crash kernel -
(a) Create bonding master
> modprobe bonding miimon=50
(b) Create macvlan bridge on eth2
> ip link add link eth2 dev mvl0 address aa:0:0:0:0:01 \
type macvlan
(c) Now try adding eth2 into the bond
> echo +eth2 > /sys/class/net/bond0/bonding/slaves
<crash>
Bonding does lots of things before checking if the device enslaved is
busy or not.
In this case when the notifier call-chain sends notifications, the
bond_netdev_event() assumes that the rx_handler /rx_handler_data is
registered while the bond_enslave() hasn't progressed far enough to
register rx_handler for the new slave.
This patch adds a rx_handler check that can be performed right at the
beginning of the enslave code to avoid getting into this situation.
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If there are outstanding LAYOUTGET rpc calls, then we want to ensure that
we keep the layout stateid around so we that don't inadvertently pick up
an old/misordered sequence id.
The race is as follows:
Client Server
====== ======
LAYOUTGET(seqid)
LAYOUTGET(seqid)
return LAYOUTGET(seqid+1)
return LAYOUTGET(seqid+2)
process LAYOUTGET(seqid+2)
forget layout
process LAYOUTGET(seqid+1)
If it forgets the layout stateid before processing seqid+1, then
the client will not check the layout->plh_barrier, and so will set
the stateid with seqid+1.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Pull x86 fix from Thomas Gleixner:
"A single fix for an AMD erratum so machines without a BIOS fix work"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/AMD: Apply erratum 665 on machines without a BIOS fix
Pull timer fixes from Thomas Gleixner:
"Two fixlet from the timers departement:
- A fix for scheduler stalls in the tick idle code affecting
NOHZ_FULL kernels
- A trivial compile fix"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/nohz: Fix softlockup on scheduler stalls in kvm guest
clocksource/drivers/atmel-pit: Fix compilation error
After address resolution, the nvme_rdma_queue rdma resources are
allocated. If rdma route resolution or the connect fails, or the
controller reconnect times out and gives up, then the rdma resources
need to be freed. Otherwise, rdma resources are leaked.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimbrg.me>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Otherwise an endpoint can be still closing down causing a touch
after free crash. Also WARN_ON if ulps have failed to destroy
various resources during device removal.
Fixes: ad61a4c7a9 ("iw_cxgb4: don't block in destroy_qp awaiting the last deref")
Reviewed-by: Sagi Grimberg <sagi@grimbrg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Pull device mapper fixes from Mike Snitzer:
- a stable fix in both DM crypt and DM log-writes for too large bios
(as generated by bcache)
- two other stable fixes for DM log-writes
- a stable fix for a DM crypt bug that could result in freeing pointers
from uninitialized memory in the tfm allocation error path
- a DM bufio cleanup to discontinue using create_singlethread_workqueue()
* tag 'dm-4.8-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm bufio: remove use of deprecated create_singlethread_workqueue()
dm crypt: fix free of bad values after tfm allocation failure
dm crypt: fix error with too large bios
dm log writes: fix check of kthread_run() return value
dm log writes: fix bug with too large bios
dm log writes: move IO accounting earlier to fix error path
Pull btrfs fixes from Chris Mason:
"I'm still prepping a set of fixes for btrfs fsync, just nailing down a
hard to trigger memory corruption. For now, these are tested and ready."
* 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
btrfs: fix one bug that process may endlessly wait for ticket in wait_reserve_ticket()
Btrfs: fix endless loop in balancing block groups
Btrfs: kill invalid ASSERT() in process_all_refs()
Pull arm64 fixes from Catalin Marinas:
"arm64 and arm/perf fixes:
- arm64 fix: debug exception unmasking on the CPU resume path
- ARM PMU fixes: memory leak on error path and NULL pointer
dereference"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: kernel: Fix unmasked debug exceptions when restoring mdscr_el1
drivers/perf: arm_pmu: Fix NULL pointer dereference during probe
drivers/perf: arm_pmu: Fix leak in error path
Pull char/misc driver fixes from Greg KH:
"Here are a number of small driver fixes for 4.8-rc5.
The largest thing here is deleting an obsolete driver,
drivers/misc/bh1780gli.c, as the functionality of it was replaced by
an iio driver a while ago.
The other fixes are things that have been reported, or reverts of
broken stuff (the binder change). All of these changes have been in
linux-next for a while with no reported issues"
* tag 'char-misc-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
thunderbolt: Don't declare Falcon Ridge unsupported
thunderbolt: Add support for INTEL_FALCON_RIDGE_2C controller.
thunderbolt: Fix resume quirk for Falcon Ridge 4C.
lkdtm: Mark lkdtm_rodata_do_nothing() notrace
mei: me: disable driver on SPT SPS firmware
Revert "android: binder: fix dangling pointer comparison"
drivers/iio/light/Kconfig: SENSORS_BH1780 cleanup
android: binder: fix dangling pointer comparison
misc: delete bh1780 driver
Pull driver core fixes from Greg KH:
"Here are three small fixes for 4.8-rc5.
One for sysfs, one for kernfs, and one documentation fix, all for
reported issues. All of these have been in linux-next for a while"
* tag 'driver-core-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
sysfs: correctly handle read offset on PREALLOC attrs
documentation: drivers/core/of: fix name of of_node symlink
kernfs: don't depend on d_find_any_alias() when generating notifications
Pull staging/IIO driver fixes from Greg KH:
"Here are a number of small fixes for staging and IIO drivers that
resolve reported problems.
Full details are in the shortlog. All of these have been in
linux-next with no reported issues"
* tag 'staging-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (35 commits)
arm: dts: rockchip: add reset node for the exist saradc SoCs
arm64: dts: rockchip: add reset saradc node for rk3368 SoCs
iio: adc: rockchip_saradc: reset saradc controller before programming it
iio: accel: kxsd9: Fix raw read return
iio: adc: ti_am335x_adc: Increase timeout value waiting for ADC sample
iio: adc: ti_am335x_adc: Protect FIFO1 from concurrent access
include/linux: fix excess fence.h kernel-doc notation
staging: wilc1000: correctly check if associatedsta has not been found
staging: wilc1000: NULL dereference on error
staging: wilc1000: txq_event: Fix coding error
MAINTAINERS: Add file patterns for ion device tree bindings
MAINTAINERS: Update maintainer entry for wilc1000
iio: chemical: atlas-ph-sensor: fix typo in val assignment
iio: fix sched WARNING "do not call blocking ops when !TASK_RUNNING"
staging: comedi: ni_mio_common: fix AO inttrig backwards compatibility
staging: comedi: dt2811: fix a precedence bug
staging: comedi: adv_pci1760: Do not return EINVAL for CMDF_ROUND_DOWN.
staging: comedi: ni_mio_common: fix wrong insn_write handler
staging: comedi: comedi_test: fix timer race conditions
staging: comedi: daqboard2000: bug fix board type matching code
...
Pull serial driver fixes from Greg KH:
"Here are some small serial driver fixes for 4.8-rc5. One fixes an
oft-reported build issue with the fintek driver, another reverts a
patch that was causing problems, one fixes a crash, and some new
device ids were added.
All of these have been in linux-next for a while"
* tag 'tty-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250: added acces i/o products quad and octal serial cards
serial: 8250_mid: fix divide error bug if baud rate is 0
Revert "tty/serial/8250: use mctrl_gpio helpers"
8250/fintek: rename IRQ_MODE macro
Pull USB/PHY fixes from Greg KH:
"Here are some USB and PHY driver fixes for 4.8-rc5
Nothing major, lots of little fixes for reported bugs, and a build fix
for a missing .h file that the phy drivers needed. All of these have
been in linux-next for a while with no reported issues"
* tag 'usb-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (24 commits)
usb: musb: Fix locking errors for host only mode
usb: dwc3: gadget: always decrement by 1
usb: dwc3: debug: fix ep name on trace output
usb: gadget: udc: core: don't starve DMA resources
USB: serial: option: add WeTelecom 0x6802 and 0x6803 products
USB: avoid left shift by -1
USB: fix typo in wMaxPacketSize validation
usb: gadget: Add the gserial port checking in gs_start_tx()
usb: dwc3: gadget: don't rely on jiffies while holding spinlock
usb: gadget: fsl_qe_udc: signedness bug in qe_get_frame()
usb: gadget: function: f_rndis: socket buffer may be NULL
usb: gadget: function: f_eem: socket buffer may be NULL
usb: renesas_usbhs: gadget: fix return value check in usbhs_mod_gadget_probe()
usb: dwc2: Add reset control to dwc2
usb: dwc3: core: allow device to runtime_suspend several times
usb: dwc3: pci: runtime_resume child device
USB: serial: option: add WeTelecom WM-D200
usb: chipidea: udc: don't touch DP when controller is in host mode
USB: serial: mos7840: fix non-atomic allocation in write path
USB: serial: mos7720: fix non-atomic allocation in write path
...
In commit 8ead9dd547 ("devpts: more pty driver interface cleanups") I
made devpts_get_priv() just return the dentry->fs_data directly. And
because I thought it wouldn't happen, I added a warning if you ever saw
a pts node that wasn't on devpts.
And no, that warning never triggered under any actual real use, but you
can trigger it by creating nonsensical pts nodes by hand.
So just revert the warning, and make devpts_get_priv() return NULL for
that case like it used to.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: stable@vger.kernel.org # 4.6+
Cc: Eric W Biederman" <ebiederm@xmission.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
pgoff_to_phys() validates that both the starting address and the length
of the mapping against the resource list. We need to check for a
mapping size of PMD_SIZE not PAGE_SIZE in the pmd fault path.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
All the scaling of the KXSD9 involves multiplication with a
fraction number < 1.
However the scaling value returned from IIO_INFO_SCALE was
unpredictable as only the micros of the value was assigned, and
not the integer part, resulting in scaling like this:
$cat in_accel_scale
-1057462640.011978
Fix this by assigning zero to the integer part.
Cc: stable@vger.kernel.org
Tested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
In at least one known setup, the chip comes up in a state where reading
the chip ID returns garbage unless it's been reset, due to noise on the
wires during system boot.
All supported chips have the same reset method, and based on the
datasheets they all need 1.3 or 1.8ms to recover after reset. So, do
the conservative thing here and always reset the chip.
Signed-off-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
If the server fails to set lrp->res.lrs_present in the LAYOUTRETURN reply,
then that means it believes the client holds no more layout state for that
file, and that the layout stateid is now invalid.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the layout was marked as invalid, we want to ensure to initialise
the layout header fields correctly.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
According to RFC5661, the client is responsible for serialising
LAYOUTGET and LAYOUTRETURN to avoid ambiguity. Consider the case
where we send both in parallel.
Client Server
====== ======
LAYOUTGET(seqid=X)
LAYOUTRETURN(seqid=X)
LAYOUTGET return seqid=X+1
LAYOUTRETURN return seqid=X+2
Process LAYOUTRETURN
Forget layout stateid
Process LAYOUTGET
Set seqid=X+1
The client processes the layoutget/layoutreturn in the wrong order,
and since the result of the layoutreturn was to clear the only
existing layout segment, the client forgets the layout stateid.
When the LAYOUTGET comes in, it is treated as having a completely
new stateid, and so the client sets the wrong sequence id...
Fix is to check if there are outstanding LAYOUTGET requests
before we send the LAYOUTRETURN (note that LAYOUGET will already
wait if it sees an outstanding LAYOUTRETURN).
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org # v4.5+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When doing O_DSYNC writes, the actual write errors are reported through
generic_write_sync(), so we must test the result.
Reported-by: J. R. Okajima <hooanon05g@gmail.com>
Fixes: 18290650b1 ("NFS: Move buffered I/O locking into nfs_file_write()")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The commit f9b2ee714c ("SUNRPC: Move UDP receive data path
into a workqueue context"), as a side effect, moved the
skb_free_datagram() call outside the scope of the related socket
lock, but UDP sockets require such lock to be held for proper
memory accounting.
Fix it by replacing skb_free_datagram() with
skb_free_datagram_locked().
Fixes: f9b2ee714c ("SUNRPC: Move UDP receive data path into a workqueue context")
Reported-and-tested-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Cc: stable@vger.kernel.org # 4.4+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
When reading SPI flash as MTD device, the transfer length is
directly passed to the spi driver. If the requested data size
exceeds 512KB, it will cause the time out calculation to
overflow since transfer length is 32-bit unsigned integer.
This issue is resolved by using 64-bit unsigned integer
to perform the arithmetic.
Signed-off-by: Sien Wu <sien.wu@ni.com>
Acked-by: Brad Keryan <brad.keryan@ni.com>
Acked-by: Gratian Crisan <gratian.crisan@ni.com>
Acked-by: Brad Mouring <brad.mouring@ni.com>
Natinst-ReviewBoard-ID 150232
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull block fixes from Jens Axboe:
"A collection of fixes for the nvme over fabrics code"
* 'for-linus' of git://git.kernel.dk/linux-block:
nvme-rdma: Get rid of redundant defines
nvme-rdma: Get rid of duplicate variable
nvme: fabrics drivers don't need the nvme-pci driver
nvme-fabrics: get a reference when reusing a nvme_host structure
nvme-fabrics: change NQN UUID to big-endian format
nvme-loop: set sqsize to 0-based value, per spec
nvme-rdma: fix sqsize/hsqsize per spec
fabrics: define admin sqsize min default, per spec
nvmet-rdma: +1 to *queue_size from hsqsize/hrqsize
nvmet-rdma: Fix use after free
nvme-rdma: initialize ret to zero to avoid returning garbage
Jeremy Linton says:
====================
net: smsc911x: Move phy and interrupt config
v2-v3: Move error handing into separate patch, replace a couple cases
of fixed errors with the errors being returned from the failing functions.
Hoist irq handler.
The smsc911x driver is doing a number of things in its probe routine that
should be delayed until the interface is started. Because of this, the module
cannot be unloaded, the phy states are incorrect/stale if the interface isn't
running, open's unnecessarily fail causing network configuration problems, and
the /proc/irq nodes are incorrectly named.
Clean up a number of these problems by moving the mdio and interrupt
configuration into the smsc911x_open routine.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The /proc/irq/xx information is incorrect for smsc911x because
the request_irq is happening before the register_netdev has the
proper device name. Moving it to the open also fixes the case
of when the device is renamed.
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation for the allocating/enabling interrupts
in the ndo_open routine move the irq handler before it.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move phy startup/shutdown into the smsc911x_open/stop routines. This
allows the module to be unloaded because phy_connect_direct is no longer
always holding the module use count. This one change also resolves a
number of other problems.
The link status of a downed interface no longer reflects a stale state.
Errors caused by the net device being opened before the mdio/phy was
configured. There is also a potential power savings as the phy's don't
remain powered when the interface isn't running.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rework the error handling in smsc911x open in preparation
for the mdio startup being moved here.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull TPM bugfix from James Morris.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
tpm: invalid self test error message
Pull ACPI fixes ffrom Rafael Wysocki:
"Two stable-candidate fixes for the ACPI early device probing code
added during the 4.4 cycle, one fixing a typo in a stub macro used
when CONFIG_ACPI is unset and one that prevents sleeping functions
from being called under a spinlock (Lorenzo Pieralisi)"
* tag 'acpi-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI / drivers: replace acpi_probe_lock spinlock with mutex
ACPI / drivers: fix typo in ACPI_DECLARE_PROBE_ENTRY macro
Pull power management fixes from Rafael Wysocki:
"This includes a stable-candidate cpufreq-dt driver problem fix and
annotations of tracepoints in the runtime PM framework.
Specifics:
- Fix the definition of the cpufreq-dt driver's machines table
introduced during the 4.7 cycle that should be NULL-terminated, but
the termination entry is missing from it (Wei Yongjun).
- Annotate tracepoints in the runtime PM framework's core so as to
allow the functions containing them to be called from the idle code
path without causing RCU to complain about illegal usage (Paul
McKenney)"
* tag 'pm-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / runtime: Add _rcuidle suffix to allow rpm_idle() use from idle
PM / runtime: Add _rcuidle suffix to allow rpm_resume() to be called from idle
cpufreq: dt: Add terminate entry for of_device_id tables
* pm-cpufreq-fixes:
cpufreq: dt: Add terminate entry for of_device_id tables
* pm-core-fixes:
PM / runtime: Add _rcuidle suffix to allow rpm_idle() use from idle
PM / runtime: Add _rcuidle suffix to allow rpm_resume() to be called from idle
Commit e647b53227 ("ACPI: Add early device probing infrastructure")
introduced code that allows inserting driver specific
struct acpi_probe_entry probe entries into ACPI linker sections
(one per-subsystem, eg irqchip, clocksource) that are then walked
to retrieve the data and function hooks required to probe the
respective kernel components.
Probing for all entries in a section is triggered through
the __acpi_probe_device_table() function, that in turn, according
to the table ID a given probe entry reports parses the table
with the function retrieved from the respective section structures
(ie struct acpi_probe_entry). Owing to the current ACPI table
parsing implementation, the __acpi_probe_device_table() function
has to share global variables with the acpi_match_madt() function, so
in order to guarantee mutual exclusion locking is required
between the two functions.
Current kernel code implements the locking through the acpi_probe_lock
spinlock; this has the side effect of requiring all code called
within the lock (ie struct acpi_probe_entry.probe_{table/subtbl} hooks)
not to sleep.
However, kernel subsystems that make use of the early probing
infrastructure are relying on kernel APIs that may sleep (eg
irq_domain_alloc_fwnode(), among others) in the function calls
pointed at by struct acpi_probe_entry.{probe_table/subtbl} entries
(eg gic_v2_acpi_init()), which is a bug.
Since __acpi_probe_device_table() is called from context
that is allowed to sleep the acpi_probe_lock spinlock can be replaced
with a mutex; this fixes the issue whilst still guaranteeing
mutual exclusion.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Fixes: e647b53227 (ACPI: Add early device probing infrastructure)
Cc: 4.4+ <stable@vger.kernel.org> # 4.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When the ACPI_DECLARE_PROBE_ENTRY macro was added in
commit e647b53227 ("ACPI: Add early device probing infrastructure"),
a stub macro adding an unused entry was added for the !CONFIG_ACPI
Kconfig option case to make sure kernel code making use of the
macro did not require to be guarded within CONFIG_ACPI in order to
be compiled.
The stub macro was never used since all kernel code that defines
ACPI_DECLARE_PROBE_ENTRY entries is currently guarded within
CONFIG_ACPI; it contains a typo that should be nonetheless fixed.
Fix the typo in the stub (ie !CONFIG_ACPI) ACPI_DECLARE_PROBE_ENTRY()
macro so that it can actually be used if needed.
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Fixes: e647b53227 (ACPI: Add early device probing infrastructure)
Cc: 4.4+ <stable@vger.kernel.org> # 4.4+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tunnel deletion is delayed by both a workqueue (l2tp_tunnel_delete -> wq
-> l2tp_tunnel_del_work) and RCU (sk_destruct -> RCU ->
l2tp_tunnel_destruct).
By the time l2tp_tunnel_destruct() runs to destroy the tunnel and finish
destroying the socket, the private data reserved via the net_generic
mechanism has already been freed, but l2tp_tunnel_destruct() actually
uses this data.
Make sure tunnel deletion for the netns has completed before returning
from l2tp_exit_net() by first flushing the tunnel removal workqueue, and
then waiting for RCU callbacks to complete.
Fixes: 167eb17e0b ("l2tp: create tunnel sockets in the right namespace")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The debugfs RCU trips many debug kernel warnings because of potential
sleeps with an RCU read lock held. This includes both user copy calls
and slab allocations throughout the file.
This patch switches the RCU to use SRCU for file remove/access
race protection.
In one case, the SRCU is implicit in the use of the raw debugfs file
object and just works.
In the seq_file case, a wrapper around seq_read() and seq_lseek() is
used to enforce the SRCU using the debugfs supplied functions
debugfs_use_file_start() and debugfs_use_file_stop().
The sychronize_rcu() is deleted since the SRCU prevents the remove
access race.
The RCU locking is kept for qp_stats since the QP hash list is
protected using the non-sleepable RCU.
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The global variable n_krcvqs stores the sum of the number of kernel
receive queues of VLs 0-7 which the user can pass to the driver through
the module parameter array krcvqs which is of type unsigned integer. If
the user passes large value(s) into krcvqs parameter array, it can cause
an arithmetic overflow while calculating n_krcvqs which is also of type
unsigned int. The overflow results in an incorrect value of n_krcvqs
which can lead to kernel crash while loading the driver.
Fix by changing the data type of n_krcvqs to unsigned long. This patch
also changes the data type of other variables that get their values from
n_krcvqs.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In the set_txreq_header_ahg(), The KDETH Intr bit is obtained from the
header in the user sdma request using a KDETH_GET shift and mask macro.
This value is then futher right shifted by 16 causing us to lose the
value i.e it is shifted to zero, leading to the following
smatch warning:
drivers/infiniband/hw/hfi1/user_sdma.c:1482 set_txreq_header_ahg()
warn: mask and shift to zero
The Intr bit should be left shifted into its correct position in the
KDETH header before the AHG update.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mitko Haralanov <mitko.haralanov@intel.com>
Reviewed-by: Harish Chegondi <harish.chegondi@intel.com>
Signed-off-by: Jubin John <jubin.john@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When trying to align the source pointer and there's a byte carry
in an SGE copy, bytes are borrowed from the next quad-word X to
complete the required quad-word copy. Then, the SGE length is
reduced by the number of borrowed bytes. After this, if the
remaining number of bytes from quad-word X (extra bytes) is
greater than the new SGE length, the number of extra bytes needs
to be updated to the new SGE length. Otherwise, when the
SGE length gets updated again after the extra bytes are read to
create the new byte carry, it goes negative, which then becomes
a very large number as the SGE length is an unsigned integer.
This causes SGE buffer to be over-read.
Reviewed-by: Dean Luick <dean.luick@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove returning errors from mlx5 poll_cq function. Polling CQ
operation in kernel never fails by Mellanox HCA architecture and
respective driver design.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Return variable was set in a line before the
actual return was called in begin_wqe function.
This patch removes such variable and simplifies the code.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The returned value should be EINVAL, because it is caused by wrong
caller and not by internal overflow event.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove returning errors from mlx4 poll_cq function. Polling CQ
operation in kernel never fails by Mellanox HCA architecture and
respective driver design.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
By Mellanox HW design and SW implementation, poll_cq never
fails and returns errors, so all these printks are to catch ULP bugs.
In case of such bug, the reverted patch will cause reentry of the
function, resulting in a printk storm.
This reverts commit 5412352fcd ("IB/mlx4: Return EAGAIN for any error in mlx4_ib_poll_one")
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When a new CM connection is being requested, ipoib driver copies data
from the path pointer in the CM/tx object, the path object might be
invalid at the point and memory corruption will happened later when now
the CM driver will try using that data.
The next scenario demonstrates it:
neigh_add_path --> ipoib_cm_create_tx -->
queue_work (pointer to path is in the cm/tx struct)
#while the work is still in the queue,
#the port goes down and causes the ipoib_flush_paths:
ipoib_flush_paths --> path_free --> kfree(path)
#at this point the work scheduled starts.
ipoib_cm_tx_start --> copy from the (invalid)path pointer:
(memcpy(&pathrec, &p->path->pathrec, sizeof pathrec);)
-> memory corruption.
To fix that the driver now starts the CM/tx connection only if that
specific path exists in the general paths database.
This check is protected with the relevant locks, and uses the gid from
the neigh member in the CM/tx object which is valid according to the ref
count that was taken by the CM/tx.
Fixes: 839fcaba35 ('IPoIB: Connected mode experimental support')
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The function send_leave sets the member: group->query_id
(group->query_id = ret) after calling the sa_query, but leave_handler
can be executed before the setting and it might delete the group object,
and will get a memory corruption.
Additionally, this patch gets rid of group->query_id variable which is
not used.
Fixes: faec2f7b96 ('IB/sa: Track multicast join/leave requests')
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
We get 1 warning when build kernel with W=1:
drivers/infiniband/hw/cxgb4/qp.c:686:6: warning: no previous prototype for '_free_qp' [-Wmissing-prototypes]
In fact, this function is only used in the file in which it is declared
and don't need a declaration, but can be made static.
so this patch marks it 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
When the low level driver exercises the hot unplug they would call
rdma_cm cma_remove_one which would fire DEVICE_REMOVAL event to all cma
consumers. Now, if consumer doesn't make sure they destroy all IB
objects created on that IB device instance prior to finalizing all
processing of DEVICE_REMOVAL callback, rdma_cm will let the lld to
de-register with IB core and destroy the IB device instance. And if the
consumer calls (say) ib_dereg_mr(), it will crash since that dev object
is NULL.
In the current implementation, iser-target just initiates the cleanup
and returns from DEVICE_REMOVAL callback. This deferred work creates a
race between iser-target cleaning IB objects(say MR) and lld destroying
IB device instance.
This patch includes the following fixes
-> make sure that consumer frees all IB objects associated with device
instance
-> return non-zero from the callback to destroy the rdma_cm id
Signed-off-by: Raju Rangoju <rajur@chelsio.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The 2nd parameter of 'find_first_bit' is the number of bits to search.
In this case, we are passing 'sizeof(u64)' which is 8.
It is likely that the number of bits of 'port_mask' was expected here.
Use sizeof() * 8 to get the correct number.
It has been spotted by the following coccinelle script:
@@
expression ret, x;
@@
* ret = \(find_first_bit \| find_first_zero_bit\) (x, sizeof(...));
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The 2nd parameter of 'find_first_bit' is the number of bits to search.
In this case, we are passing 'sizeof(tmp)' which is likely to be 4 or 8
because 'tmp' is an 'unsigned long'.
It is likely that the number of bits of 'tmp' was expected here. So use
BITS_PER_LONG instead.
It has been spotted by the following coccinelle script:
@@
expression ret, x;
@@
* ret = \(find_first_bit \| find_first_zero_bit\) (x, sizeof(...));
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Majd Dibbiny <majd@mellanox.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Łukasz Daniluk reported that on a RHEL kernel that his machine would lock up
after enabling function tracer. I asked him to bisect the functions within
available_filter_functions, which he did and it came down to three:
_paravirt_nop(), _paravirt_ident_32() and _paravirt_ident_64()
It was found that this is only an issue when noreplace-paravirt is added
to the kernel command line.
This means that those functions are most likely called within critical
sections of the funtion tracer, and must not be traced.
In newer kenels _paravirt_nop() is defined within gcc asm(), and is no
longer an issue. But both _paravirt_ident_{32,64}() causes the
following splat when they are traced:
mm/pgtable-generic.c:33: bad pmd ffff8800d2435150(0000000001d00054)
mm/pgtable-generic.c:33: bad pmd ffff8800d3624190(0000000001d00070)
mm/pgtable-generic.c:33: bad pmd ffff8800d36a5110(0000000001d00054)
mm/pgtable-generic.c:33: bad pmd ffff880118eb1450(0000000001d00054)
NMI watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [systemd-journal:469]
Modules linked in: e1000e
CPU: 2 PID: 469 Comm: systemd-journal Not tainted 4.6.0-rc4-test+ #513
Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012
task: ffff880118f740c0 ti: ffff8800d4aec000 task.ti: ffff8800d4aec000
RIP: 0010:[<ffffffff81134148>] [<ffffffff81134148>] queued_spin_lock_slowpath+0x118/0x1a0
RSP: 0018:ffff8800d4aefb90 EFLAGS: 00000246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88011eb16d40
RDX: ffffffff82485760 RSI: 000000001f288820 RDI: ffffea0000008030
RBP: ffff8800d4aefb90 R08: 00000000000c0000 R09: 0000000000000000
R10: ffffffff821c8e0e R11: 0000000000000000 R12: ffff880000200fb8
R13: 00007f7a4e3f7000 R14: ffffea000303f600 R15: ffff8800d4b562e0
FS: 00007f7a4e3d7840(0000) GS:ffff88011eb00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f7a4e3f7000 CR3: 00000000d3e71000 CR4: 00000000001406e0
Call Trace:
_raw_spin_lock+0x27/0x30
handle_pte_fault+0x13db/0x16b0
handle_mm_fault+0x312/0x670
__do_page_fault+0x1b1/0x4e0
do_page_fault+0x22/0x30
page_fault+0x28/0x30
__vfs_read+0x28/0xe0
vfs_read+0x86/0x130
SyS_read+0x46/0xa0
entry_SYSCALL_64_fastpath+0x1e/0xa8
Code: 12 48 c1 ea 0c 83 e8 01 83 e2 30 48 98 48 81 c2 40 6d 01 00 48 03 14 c5 80 6a 5d 82 48 89 0a 8b 41 08 85 c0 75 09 f3 90 8b 41 08 <85> c0 74 f7 4c 8b 09 4d 85 c9 74 08 41 0f 18 09 eb 02 f3 90 8b
Reported-by: Łukasz Daniluk <lukasz.daniluk@intel.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull overlayfs fixes from Miklos Szeredi:
"Most of this is regression fixes for posix acl behavior introduced in
4.8-rc1 (these were caught by the pjd-fstest suite). The are also
miscellaneous fixes marked as stable material and cleanups.
Other than overlayfs code, it touches <linux/fs.h> to add a constant
with which to disable posix acl caching. No changes needed to the
actual caching code, it automatically does the right thing, although
later we may want to optimize this case.
I'm now testing overlayfs with the following test suites to catch
regressions:
- unionmount-testsuite
- xfstests
- pjd-fstest"
* 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: update doc
ovl: listxattr: use strnlen()
ovl: Switch to generic_getxattr
ovl: copyattr after setting POSIX ACL
ovl: Switch to generic_removexattr
ovl: Get rid of ovl_xattr_noacl_handlers array
ovl: Fix OVL_XATTR_PREFIX
ovl: fix spelling mistake: "directries" -> "directories"
ovl: don't cache acl on overlay layer
ovl: use cached acl on underlying layer
ovl: proper cleanup of workdir
ovl: remove posix_acl_default from workdir
ovl: handle umask and posix_acl_default correctly on creation
ovl: don't copy up opaqueness
Changes to make the resume from cpu_suspend() code behave more like
secondary boot caused debug exceptions to be unmasked early by
__cpu_setup(). We then go on to restore mdscr_el1 in cpu_do_resume(),
potentially taking break or watch points based on uninitialised registers.
Mask debug exceptions in cpu_do_resume(), which is specific to resume
from cpu_suspend(). Debug exceptions will be restored to their original
state by local_dbg_restore() in cpu_suspend(), which runs after
hw_breakpoint_restore() has re-initialised the other registers.
Reported-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Fixes: cabe1c81ea ("arm64: Change cpu_resume() to enable mmu early then access sleep_sp by va")
Cc: <stable@vger.kernel.org> # 4.7+
Signed-off-by: James Morse <james.morse@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Patch 7f1d642fbb ("drivers/perf: arm-pmu: Fix handling of SPI lacking
interrupt-affinity property") unintended also fixes perf_event support
for bcm2835 which doesn't have PMU interrupts. Unfortunately this change
introduce a NULL pointer dereference on bcm2835, because irq_is_percpu
always expected to be called with a valid IRQ. So fix this regression
by validating the IRQ before.
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: 7f1d642fbb ("drivers/perf: arm-pmu: Fix handling of SPI lacking "interrupt-affinity" property")
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In case of a IRQ type mismatch in of_pmu_irq_cfg() the
device node for interrupt affinity isn't freed. So fix this
issue by calling of_node_put().
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Fixes: fa8ad7889d ("arm: perf: factor arm_pmu core out to drivers")
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull dmaengine fixes from Vinod Koul:
"The fixes this time are all in drivers:
- possible NULL dereference in img-mdc
- correct device identity for free_irq in at_xdmac
- missing of_node_put() in fsl probe
- fix debug log and hotchain corner case for pxa-dma
- fix checking hardware bits in isr in usb dmac"
* tag 'dmaengine-fix-4.8-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: img-mdc: fix a possible NULL dereference
dmaengine: at_xdmac: fix to pass correct device identity to free_irq()
dmaengine: fsl_raid: add missing of_node_put() in fsl_re_probe()
dmaengine: pxa_dma: fix debug message
dmaengine: pxa_dma: fix hotchain corner case
dmaengine: usb-dmac: check CHCR.DE bit in usb_dmac_isr_channel()
Pull drm fixes from Dave Airlie:
"Contains fixes for imx, amdgpu, vc4, msm and one nouveau ACPI fix"
* tag 'drm-fixes-for-4.8-rc5' of git://people.freedesktop.org/~airlied/linux:
drm/amdgpu: record error code when ring test failed
drm/amd/amdgpu: compute ring test fail during S4 on CI
drm/amd/amdgpu: sdma resume fail during S4 on CI
drm/nouveau/acpi: use DSM if bridge does not support D3cold
drm/imx: fix crtc vblank state regression
drm/imx: Add active plane reconfiguration support
drm/msm: protect against faults from copy_from_user() in submit ioctl
drm/msm: fix use of copy_from_user() while holding spinlock
drm/vc4: Fix oops when userspace hands in a bad BO.
drm/vc4: Fix overflow mem unreferencing when the binner runs dry.
drm/vc4: Free hang state before destroying BO cache.
drm/vc4: Fix handling of a pm_runtime_get_sync() success case.
drm/vc4: Use drm_malloc_ab to fix large rendering jobs.
drm/vc4: Use drm_free_large() on handles to match its allocation.
Merge "bus: ARM CCN PMU driver updates" from Paweł Moll:
- Fixes and improvements for XP watchpoint and events handling
- Added missing condition checks for KVM-related exclusions
- Improved interrupt affinity handling
- Fix for hrtimer use in polling mode
- Event grouping implementation improvement
* tag 'ccn/fixes-for-4.8-v2' of git://git.linaro.org/people/pawel.moll/linux:
bus: arm-ccn: make event groups reliable
bus: arm-ccn: fix hrtimer registration
bus: arm-ccn: fix PMU interrupt flags
bus: arm-ccn: Add missing event attribute exclusions for host/guest
bus: arm-ccn: Correct required arguments for XP PMU events
bus: arm-ccn: Fix XP watchpoint settings bitmask
bus: arm-ccn: Do not attempt to configure XPs for cycle counter
bus: arm-ccn: Fix PMU handling of MN
Merge "mvebu fixes for 4.8 (part 1)" from Gregory CLEMENT:
Few device tree fix on kirkwood:
- enable PCIe on OpenRD
- use correct u-boot environment partition size on ib62x0
* tag 'mvebu-fixes-4.8-2' of git://git.infradead.org/linux-mvebu:
ARM: dts: kirkwood: Fix PCIe label on OpenRD
ARM: kirkwood: ib62x0: fix size of u-boot environment partition
I got this with syzkaller:
==================================================================
BUG: KASAN: null-ptr-deref on address 0000000000000020
Read of size 32 by task syz-executor/22519
CPU: 1 PID: 22519 Comm: syz-executor Not tainted 4.8.0-rc2+ #169
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2
014
0000000000000001 ffff880111a17a00 ffffffff81f9f141 ffff880111a17a90
ffff880111a17c50 ffff880114584a58 ffff880114584a10 ffff880111a17a80
ffffffff8161fe3f ffff880100000000 ffff880118d74a48 ffff880118d74a68
Call Trace:
[<ffffffff81f9f141>] dump_stack+0x83/0xb2
[<ffffffff8161fe3f>] kasan_report_error+0x41f/0x4c0
[<ffffffff8161ff74>] kasan_report+0x34/0x40
[<ffffffff82c84b54>] ? snd_timer_user_read+0x554/0x790
[<ffffffff8161e79e>] check_memory_region+0x13e/0x1a0
[<ffffffff8161e9c1>] kasan_check_read+0x11/0x20
[<ffffffff82c84b54>] snd_timer_user_read+0x554/0x790
[<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0
[<ffffffff817d0831>] ? proc_fault_inject_write+0x1c1/0x250
[<ffffffff817d0670>] ? next_tgid+0x2a0/0x2a0
[<ffffffff8127c278>] ? do_group_exit+0x108/0x330
[<ffffffff8174653a>] ? fsnotify+0x72a/0xca0
[<ffffffff81674dfe>] __vfs_read+0x10e/0x550
[<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0
[<ffffffff81674cf0>] ? do_sendfile+0xc50/0xc50
[<ffffffff81745e10>] ? __fsnotify_update_child_dentry_flags+0x60/0x60
[<ffffffff8143fec6>] ? kcov_ioctl+0x56/0x190
[<ffffffff81e5ada2>] ? common_file_perm+0x2e2/0x380
[<ffffffff81746b0e>] ? __fsnotify_parent+0x5e/0x2b0
[<ffffffff81d93536>] ? security_file_permission+0x86/0x1e0
[<ffffffff816728f5>] ? rw_verify_area+0xe5/0x2b0
[<ffffffff81675355>] vfs_read+0x115/0x330
[<ffffffff81676371>] SyS_read+0xd1/0x1a0
[<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0
[<ffffffff82001c2c>] ? __this_cpu_preempt_check+0x1c/0x20
[<ffffffff8150455a>] ? __context_tracking_exit.part.4+0x3a/0x1e0
[<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0
[<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0
[<ffffffff810052fc>] ? syscall_return_slowpath+0x16c/0x1d0
[<ffffffff83c3276a>] entry_SYSCALL64_slow_path+0x25/0x25
==================================================================
There are a couple of problems that I can see:
- ioctl(SNDRV_TIMER_IOCTL_SELECT), which potentially sets
tu->queue/tu->tqueue to NULL on memory allocation failure, so read()
would get a NULL pointer dereference like the above splat
- the same ioctl() can free tu->queue/to->tqueue which means read()
could potentially see (and dereference) the freed pointer
We can fix both by taking the ioctl_lock mutex when dereferencing
->queue/->tqueue, since that's always held over all the ioctl() code.
Just looking at the code I find it likely that there are more problems
here such as tu->qhead pointing outside the buffer if the size is
changed concurrently using SNDRV_TIMER_IOCTL_PARAMS.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
tick_nohz_start_idle() is prevented to be called if the idle tick can't
be stopped since commit 1f3b0f8243 ("tick/nohz: Optimize nohz idle
enter"). As a result, after suspend/resume the host machine, full dynticks
kvm guest will softlockup:
NMI watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [swapper/0:0]
Call Trace:
default_idle+0x31/0x1a0
arch_cpu_idle+0xf/0x20
default_idle_call+0x2a/0x50
cpu_startup_entry+0x39b/0x4d0
rest_init+0x138/0x140
? rest_init+0x5/0x140
start_kernel+0x4c1/0x4ce
? set_init_arg+0x55/0x55
? early_idt_handler_array+0x120/0x120
x86_64_start_reservations+0x24/0x26
x86_64_start_kernel+0x142/0x14f
In addition, cat /proc/stat | grep cpu in guest or host:
cpu 398 16 5049 15754 5490 0 1 46 0 0
cpu0 206 5 450 0 0 0 1 14 0 0
cpu1 81 0 3937 3149 1514 0 0 9 0 0
cpu2 45 6 332 6052 2243 0 0 11 0 0
cpu3 65 2 328 6552 1732 0 0 11 0 0
The idle and iowait states are weird 0 for cpu0(housekeeping).
The bug is present in both guest and host kernels, and they both have
cpu0's idle and iowait states issue, however, host kernel's suspend/resume
path etc will touch watchdog to avoid the softlockup.
- The watchdog will not be touched in tick_nohz_stop_idle path (need be
touched since the scheduler stall is expected) if idle_active flags are
not detected.
- The idle and iowait states will not be accounted when exit idle loop
(resched or interrupt) if idle start time and idle_active flags are
not set.
This patch fixes it by reverting commit 1f3b0f8243 since can't stop
idle tick doesn't mean can't be idle.
Fixes: 1f3b0f8243 ("tick/nohz: Optimize nohz idle enter")
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Sanjeev Yadav<sanjeev.yadav@spreadtrum.com>
Cc: Gaurav Jindal<gaurav.jindal@spreadtrum.com>
Cc: stable@vger.kernel.org
Cc: kvm@vger.kernel.org
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lkml.kernel.org/r/1472798303-4154-1-git-send-email-wanpeng.li@hotmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The current implementation only works if the da9xxx devices are added
before their drivers are registered. Only then it can apply the fixes to
both devices. Otherwise, the driver for the first device gets probed
before the fix for the second device can be applied. This is what
fails when using the IP core switcher or when having the i2c master
driver as a module.
So, we need to disable both da9xxx once we detected one of them. We now
use i2c_transfer with hardcoded i2c_messages and device addresses, so we
don't need the da9xxx client devices to be instantiated. Because the
fixup is used on specific boards only, the addresses are not going to
change.
Fixes: 663fbb5215 ("ARM: shmobile: R-Car Gen2: Add da9063/da9210 regulator quirk")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> (r8a7791/koelsch)
Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Commit 8eb30be035 ("ipv6: Create ip6_tnl_xmit") unsets
flowi6_proto in ip4ip6_tnl_xmit() and ip6ip6_tnl_xmit().
Since xfrm_selector_match() relies on this info, IPv6 packets
sent by an ip6tunnel cannot be properly selected by their
protocols after removing it. This patch puts flowi6_proto back.
Cc: stable@vger.kernel.org
Fixes: 8eb30be035 ("ipv6: Create ip6_tnl_xmit")
Signed-off-by: Eli Cooper <elicooper@gmx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This pull request brings in fixes for VC4 3D in 4.8, most of which are
covered by testcases.
* tag 'drm-vc4-fixes-2016-08-29' of https://github.com/anholt/linux:
drm/vc4: Fix oops when userspace hands in a bad BO.
drm/vc4: Fix overflow mem unreferencing when the binner runs dry.
drm/vc4: Free hang state before destroying BO cache.
drm/vc4: Fix handling of a pm_runtime_get_sync() success case.
drm/vc4: Use drm_malloc_ab to fix large rendering jobs.
drm/vc4: Use drm_free_large() on handles to match its allocation.
When PCI error is detected, in some architectures (like PowerPC) a slot
reset is performed - the driver's error handlers are in charge of "disable"
device before the reset, and re-enable it after a successful slot reset.
There are two cases though that another path is taken on the code: if the
slot reset is not successful or if too many errors already happened in the
specific adapter (meaning that possibly the device is experiencing a HW
failure that slot reset is not able to solve), the core PCI error mechanism
(called EEH in PowerPC) will remove the adapter from the system, since it
will consider this as a permanent failure on device. In this case, a path
is taken that leads to bnx2x_chip_cleanup() calling bnx2x_reset_hw(), which
then tries to perform a HW reset on chip. This reset won't succeed since
the HW is in a fault state, which can be seen by multiple messages on
kernel log like below:
bnx2x: [bnx2x_issue_dmae_with_comp:552(eth1)]DMAE timeout!
bnx2x: [bnx2x_write_dmae:600(eth1)]DMAE returned failure -1
After some time, the PCI error mechanism gives up on waiting the driver's
correct removal procedure and forcibly remove the adapter from the system.
We can see soft lockup while core PCI error mechanism is waiting for driver
to accomplish the right removal process.
This patch adds a verification to avoid a chip reset whenever the function
is in PCI error state - since this case is only reached when we have a
device being removed because of a permanent failure, the HW chip reset is
not expected to work fine neither is necessary.
Also, as a minor improvement in error path, we avoid the MCP information dump
in case of non-recoverable PCI error (when adapter is about to be removed),
since it will certainly fail.
Reported-by: Harsha Thyagaraja <hathyaga@in.ibm.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Acked-By: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
imx-drm atomic modeset regression fixes
- add active plane reconfiguration support
- add back crtc vblank state reporting
* tag 'imx-drm-fixes-2016-08-30' of git://git.pengutronix.de/git/pza/linux:
drm/imx: fix crtc vblank state regression
drm/imx: Add active plane reconfiguration support
The original codes depend on that the function parameters are evaluated from
left to right. But the parameter's evaluation order is not defined in C
standard actually.
When flow_keys_have_l4(&keys) is invoked before ___skb_get_hash(skb, &keys,
hashrnd) with some compilers or environment, the keys passed to
flow_keys_have_l4 is not initialized.
Fixes: 6db61d79c1 ("flow_dissector: Ignore flow dissector return value from ___skb_get_hash")
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull clk fixes from Stephen Boyd:
"A collection of small fixes for various SoC vendor clk drivers"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: rockchip: mark aclk_emmc_noc as a critical clock on rk3399
clk: tegra: remove TEGRA_PLL_USE_LOCK for PLLD/PLLD2
clk: rockchip: fix incorrect GATE bits for {c, g}pll_aclk_perihp_src on rk3399
clk: rockchip: fix incorrect aclk_emmc source gate bits on rk3399
clk: renesas: r8a7795: Fix SD clocks
clk: rockchip: fix rk3399 aclk_vio gate bit
clk: sunxi-ng: Fix inverted test condition in ccu_helper_wait_for_lock
Merge fixes from Andrew Morton:
"14 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
rapidio/tsi721: fix incorrect detection of address translation condition
rapidio/documentation/mport_cdev: add missing parameter description
kernel/fork: fix CLONE_CHILD_CLEARTID regression in nscd
MAINTAINERS: Vladimir has moved
mm, mempolicy: task->mempolicy must be NULL before dropping final reference
printk/nmi: avoid direct printk()-s from __printk_nmi_flush()
treewide: remove references to the now unnecessary DEFINE_PCI_DEVICE_TABLE
drivers/scsi/wd719x.c: remove last declaration using DEFINE_PCI_DEVICE_TABLE
mm, vmscan: only allocate and reclaim from zones with pages managed by the buddy allocator
lib/test_hash.c: fix warning in preprocessor symbol evaluation
lib/test_hash.c: fix warning in two-dimensional array init
kconfig: tinyconfig: provide whole choice blocks to avoid warnings
kexec: fix double-free when failing to relocate the purgatory
mm, oom: prevent premature OOM killer invocation for high order request
Commit fec1d01152 ("[PATCH] Disable CLONE_CHILD_CLEARTID for abnormal
exit") has caused a subtle regression in nscd which uses
CLONE_CHILD_CLEARTID to clear the nscd_certainly_running flag in the
shared databases, so that the clients are notified when nscd is
restarted. Now, when nscd uses a non-persistent database, clients that
have it mapped keep thinking the database is being updated by nscd, when
in fact nscd has created a new (anonymous) one (for non-persistent
databases it uses an unlinked file as backend).
The original proposal for the CLONE_CHILD_CLEARTID change claimed
(https://lkml.org/lkml/2006/10/25/233):
: The NPTL library uses the CLONE_CHILD_CLEARTID flag on clone() syscalls
: on behalf of pthread_create() library calls. This feature is used to
: request that the kernel clear the thread-id in user space (at an address
: provided in the syscall) when the thread disassociates itself from the
: address space, which is done in mm_release().
:
: Unfortunately, when a multi-threaded process incurs a core dump (such as
: from a SIGSEGV), the core-dumping thread sends SIGKILL signals to all of
: the other threads, which then proceed to clear their user-space tids
: before synchronizing in exit_mm() with the start of core dumping. This
: misrepresents the state of process's address space at the time of the
: SIGSEGV and makes it more difficult for someone to debug NPTL and glibc
: problems (misleading him/her to conclude that the threads had gone away
: before the fault).
:
: The fix below is to simply avoid the CLONE_CHILD_CLEARTID action if a
: core dump has been initiated.
The resulting patch from Roland (https://lkml.org/lkml/2006/10/26/269)
seems to have a larger scope than the original patch asked for. It
seems that limitting the scope of the check to core dumping should work
for SIGSEGV issue describe above.
[Changelog partly based on Andreas' description]
Fixes: fec1d01152 ("[PATCH] Disable CLONE_CHILD_CLEARTID for abnormal exit")
Link: http://lkml.kernel.org/r/1471968749-26173-1-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Tested-by: William Preston <wpreston@suse.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Andreas Schwab <schwab@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
KASAN allocates memory from the page allocator as part of
kmem_cache_free(), and that can reference current->mempolicy through any
number of allocation functions. It needs to be NULL'd out before the
final reference is dropped to prevent a use-after-free bug:
BUG: KASAN: use-after-free in alloc_pages_current+0x363/0x370 at addr ffff88010b48102c
CPU: 0 PID: 15425 Comm: trinity-c2 Not tainted 4.8.0-rc2+ #140
...
Call Trace:
dump_stack
kasan_object_err
kasan_report_error
__asan_report_load2_noabort
alloc_pages_current <-- use after free
depot_save_stack
save_stack
kasan_slab_free
kmem_cache_free
__mpol_put <-- free
do_exit
This patch sets current->mempolicy to NULL before dropping the final
reference.
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1608301442180.63329@chino.kir.corp.google.com
Fixes: cd11016e5f ("mm, kasan: stackdepot implementation. Enable stackdepot for SLAB")
Signed-off-by: David Rientjes <rientjes@google.com>
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org> [4.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__printk_nmi_flush() can be called from nmi_panic(), therefore it has to
test whether it's executed in NMI context and thus must route the
messages through deferred printk() or via direct printk().
This is to avoid potential deadlocks, as described in commit
cf9b1106c8 ("printk/nmi: flush NMI messages on the system panic").
However there remain two places where __printk_nmi_flush() does
unconditional direct printk() calls:
- pr_err("printk_nmi_flush: internal error ...")
- pr_cont("\n")
Factor out print_nmi_seq_line() parts into a new printk_nmi_flush_line()
function, which takes care of in_nmi(), and use it in
__printk_nmi_flush() for printing and error-reporting.
Link: http://lkml.kernel.org/r/20160830161354.581-1-sergey.senozhatsky@gmail.com
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Firmware Assisted Dump (FA_DUMP) on ppc64 reserves substantial amounts
of memory when booting a secondary kernel. Srikar Dronamraju reported
that multiple nodes may have no memory managed by the buddy allocator
but still return true for populated_zone().
Commit 1d82de618d ("mm, vmscan: make kswapd reclaim in terms of
nodes") was reported to cause kswapd to spin at 100% CPU usage when
fadump was enabled. The old code happened to deal with the situation of
a populated node with zero free pages by co-incidence but the current
code tries to reclaim populated zones without realising that is
impossible.
We cannot just convert populated_zone() as many existing users really
need to check for present_pages. This patch introduces a managed_zone()
helper and uses it in the few cases where it is critical that the check
is made for managed pages -- zonelist construction and page reclaim.
Link: http://lkml.kernel.org/r/20160831195104.GB8119@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some versions of gcc don't like tests for the value of an undefined
preprocessor symbol, even in the #else branch of an #ifndef:
lib/test_hash.c:224:7: warning: "HAVE_ARCH__HASH_32" is not defined [-Wundef]
#elif HAVE_ARCH__HASH_32 != 1
^
lib/test_hash.c:229:7: warning: "HAVE_ARCH_HASH_32" is not defined [-Wundef]
#elif HAVE_ARCH_HASH_32 != 1
^
lib/test_hash.c:234:7: warning: "HAVE_ARCH_HASH_64" is not defined [-Wundef]
#elif HAVE_ARCH_HASH_64 != 1
^
Seen with gcc 4.9, not seen with 4.1.2.
Change the logic to only check the value inside an #ifdef to fix this.
Fixes: 468a942852 ("<linux/hash.h>: Add support for architecture-specific functions")
Link: http://lkml.kernel.org/r/20160829214952.1334674-4-arnd@arndb.de
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: George Spelvin <linux@sciencehorizons.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using "make tinyconfig" produces a couple of annoying warnings that show
up for build test machines all the time:
.config:966:warning: override: NOHIGHMEM changes choice state
.config:965:warning: override: SLOB changes choice state
.config:963:warning: override: KERNEL_XZ changes choice state
.config:962:warning: override: CC_OPTIMIZE_FOR_SIZE changes choice state
.config:933:warning: override: SLOB changes choice state
.config:930:warning: override: CC_OPTIMIZE_FOR_SIZE changes choice state
.config:870:warning: override: SLOB changes choice state
.config:868:warning: override: KERNEL_XZ changes choice state
.config:867:warning: override: CC_OPTIMIZE_FOR_SIZE changes choice state
I've made a previous attempt at fixing them and we discussed a number of
alternatives.
I tried changing the Makefile to use "merge_config.sh -n
$(fragment-list)" but couldn't get that to work properly.
This is yet another approach, based on the observation that we do want
to see a warning for conflicting 'choice' options, and that we can
simply make them non-conflicting by listing all other options as
disabled. This is a trivial patch that we can apply independent of
plans for other changes.
Link: http://lkml.kernel.org/r/20160829214952.1334674-2-arnd@arndb.de
Link: https://storage.kernelci.org/mainline/v4.7-rc6/x86-tinyconfig/build.loghttps://patchwork.kernel.org/patch/9212749/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If kexec_apply_relocations fails, kexec_load_purgatory frees pi->sechdrs
and pi->purgatory_buf. This is redundant, because in case of error
kimage_file_prepare_segments calls kimage_file_post_load_cleanup, which
will also free those buffers.
This causes two warnings like the following, one for pi->sechdrs and the
other for pi->purgatory_buf:
kexec-bzImage64: Loading purgatory failed
------------[ cut here ]------------
WARNING: CPU: 1 PID: 2119 at mm/vmalloc.c:1490 __vunmap+0xc1/0xd0
Trying to vfree() nonexistent vm area (ffffc90000e91000)
Modules linked in:
CPU: 1 PID: 2119 Comm: kexec Not tainted 4.8.0-rc3+ #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
dump_stack+0x4d/0x65
__warn+0xcb/0xf0
warn_slowpath_fmt+0x4f/0x60
? find_vmap_area+0x19/0x70
? kimage_file_post_load_cleanup+0x47/0xb0
__vunmap+0xc1/0xd0
vfree+0x2e/0x70
kimage_file_post_load_cleanup+0x5e/0xb0
SyS_kexec_file_load+0x448/0x680
? putname+0x54/0x60
? do_sys_open+0x190/0x1f0
entry_SYSCALL_64_fastpath+0x13/0x8f
---[ end trace 158bb74f5950ca2b ]---
Fix by setting pi->sechdrs an pi->purgatory_buf to NULL, since vfree
won't try to free a NULL pointer.
Link: http://lkml.kernel.org/r/1472083546-23683-1-git-send-email-bauerman@linux.vnet.ibm.com
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yuchung noticed that on the first TFO server data packet sent after
the (TFO) handshake, the server echoed the TCP timestamp value in the
SYN/data instead of the timestamp value in the final ACK of the
handshake. This problem did not happen on regular opens.
The tcp_replace_ts_recent() logic that decides whether to remember an
incoming TS value needs tp->rcv_wup to hold the latest receive
sequence number that we have ACKed (latest tp->rcv_nxt we have
ACKed). This commit fixes this issue by ensuring that a TFO server
properly updates tp->rcv_wup to match tp->rcv_nxt at the time it sends
a SYN/ACK for the SYN/data.
Reported-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Fixes: 168a8f5805 ("tcp: TCP Fast Open Server - main code path")
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull audit fixes from Paul Moore:
"Two small patches to fix some bugs with the audit-by-executable
functionality we introduced back in v4.3 (both patches are marked
for the stable folks)"
* 'stable-4.8' of git://git.infradead.org/users/pcmoore/audit:
audit: fix exe_file access in audit_exe_compare
mm: introduce get_task_exe_file
Pull xfs and iomap fixes from Dave Chinner:
"Most of these changes are small regression fixes that address problems
introduced in the 4.8-rc1 window. The two fixes that aren't (IO
completion fix and superblock inprogress check) are fixes for problems
introduced some time ago and need to be pushed back to stable kernels.
Changes in this update:
- iomap FIEMAP_EXTENT_MERGED usage fix
- additional mount-time feature restrictions
- rmap btree query fixes
- freeze/unmount io completion workqueue fix
- memory corruption fix for deferred operations handling"
* tag 'xfs-iomap-for-linus-4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
xfs: track log done items directly in the deferred pending work item
iomap: don't set FIEMAP_EXTENT_MERGED for extent based filesystems
xfs: prevent dropping ioend completions during buftarg wait
xfs: fix superblock inprogress check
xfs: simple btree query range should look right if LE lookup fails
xfs: fix some key handling problems in _btree_simple_query_range
xfs: don't log the entire end of the AGF
xfs: disallow mounting of realtime + rmap filesystems
xfs: don't perform lookups on zero-height btrees
The 'default' value was not advertised.
Fixes: f3a1bfb11c ("rtnl/ipv6: use netconf msg to advertise forwarding status")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham says:
====================
net: thunderx: Fixes for TSO offload issues
This patch series fixes couple of issues w.r.t HW TSO offload
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
On ThunderX 88xx pass 2.x chips when TSO is offloaded to HW,
HW posts a CQE for every TSO segment transmitted. Current code
does handles this, but is prone to issues when segment sizes are
small resulting in SW processing too many CQEs and also at times
frees a SKB which is not yet transmitted.
This patch handles the errata in a different way and eliminates issues
with earlier approach, TSO packet is submitted to HW with post_cqe=0,
so that no CQE is posted upon completion of transmission of TSO packet
but a additional HDR + IMMEDIATE descriptors are added to SQ due to
which a CQE is posted and will have required info to be used while
cleanup in napi. This way only one CQE is posted for a TSO packet.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a issue in HW where-in while sending GSO sized pkts
as part of TSO, if pkt len falls below configured min packet
size i.e 60, NIC will zero PAD packet and also updates IP total length.
Hence set this value to lessthan min pkt size of MAC + IP + TCP
headers, BGX will anyway do the padding to transmit 64 byte pkt
including FCS.
Signed-off-by: Sunil Goutham <sgoutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If DCB is configured on the link partner switch with an
unsupported traffic class configuration (e.g. non-contiguous TCs),
the driver is flagging DCB as disabled. But, for future DCB
LLDPDUs, the driver was checking if the interface was DCB capable
instead of enabled. This was causing a kernel panic when LLDP
was enabled/disabled on the link partner switch.
This patch corrects the situation by having the LLDP event handler
check the correct flag in the pf structure. It also cleans up the
setting and clearing of the enabled flag for other checks.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kalle Valo says:
====================
wireless-drivers fixes for 4.8
ath9k
* fix regression in client mode beacon configuration
* fix a station pointer which resulted in spurious crashes
mwifiex
* fix large amsdu packets causing firmware hang
brcmfmac
* fix deadlock when removing interface
* fix use of mutex in atomic context
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In a dual bearer configuration, if the second tipc link becomes
active while the first link still has pending nametable "bulk"
updates, it randomly leads to reset of the second link.
When a link is established, the function named_distribute(),
fills the skb based on node mtu (allows room for TUNNEL_PROTOCOL)
with NAME_DISTRIBUTOR message for each PUBLICATION.
However, the function named_distribute() allocates the buffer by
increasing the node mtu by INT_H_SIZE (to insert NAME_DISTRIBUTOR).
This consumes the space allocated for TUNNEL_PROTOCOL.
When establishing the second link, the link shall tunnel all the
messages in the first link queue including the "bulk" update.
As size of the NAME_DISTRIBUTOR messages while tunnelling, exceeds
the link mtu the transmission fails (-EMSGSIZE).
Thus, the synch point based on the message count of the tunnel
packets is never reached leading to link timeout.
In this commit, we adjust the size of name distributor message so that
they can be tunnelled.
Reviewed-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The recent commit 087d7a8c91 "tg3: Fix for diasllow rx coalescing
time to be 0" disallow to set Rx coalescing time to be 0 as this stops
generating interrupts for the incoming packets. I found the zero
Tx coalescing time stops generating interrupts for outgoing packets
as well and fires Tx watchdog later. To avoid this, don't allow to set
Tx coalescing time to 0 and also remove subsequent checks that become
senseless.
Cc: satish.baddipadige@broadcom.com
Cc: siva.kallam@broadcom.com
Cc: michael.chan@broadcom.com
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Acked-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/qlogic/qed/qed_dcbx.c:1230:13-20: WARNING: kzalloc should be used for dcbx_info, instead of kmalloc/memset
drivers/net/ethernet/qlogic/qed/qed_dcbx.c:1192:13-20: WARNING: kzalloc should be used for dcbx_info, instead of kmalloc/memset
Use kzalloc rather than kmalloc followed by memset with 0
This considers some simple cases that are common and easy to validate
Note in particular that there are no ...s in the rule, so all of the
matched code has to be contiguous
Generated by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci
CC: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Acked-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko says:
====================
mlxsw: couple of fixes
Couple of fixes from Ido and myself.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When a VLAN is added on a bridge port we should use the existing unicast
flood configuration of the port instead of assuming it's enabled.
Fixes: 0293038e0c ("mlxsw: spectrum: Add support for flood control")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit 14d39461b3 ("mlxsw: spectrum: Use per-FID struct for the
VLAN-aware bridge") I added a per-FID struct, which member ports can
take a reference on upon VLAN membership configuration.
However, sometimes only the VLAN flags (e.g. egress untagged) are
toggled without changing the VLAN membership. In these cases we
shouldn't take another reference on the FID.
Fixes: 14d39461b3 ("mlxsw: spectrum: Use per-FID struct for the VLAN-aware bridge")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the notifier is registered for every asic instance, however the
same block. Fix this by moving the registration to module init.
Fixes: c723c735fa ("mlxsw: spectrum_router: Periodically update the kernel's neigh table")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Originally, I expected that there would be needed to call update
operation in case RALUE record action is changed. However, that is not
needed since write operation takes care of that nicely. Remove prepared
construct and always call the write operation.
Fixes: 61c503f976 ("mlxsw: spectrum_router: Implement fib4 add/del switchdev obj ops")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In mlxsw we squash tables 254 and 255 together into HW. Kernel adds/dels
/32 ip to/from both 254 and 255. On del path, that causes the same
prefix being removed twice. Fix this by introducing reference counting
for private mlxsw fib entries. That required a bit of code reshuffle.
Also put dev into fib entry key so the same prefix could be represented
once per every router interface.
Fixes: 61c503f976 ("mlxsw: spectrum_router: Implement fib4 add/del switchdev obj ops")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If can_overcommit() in btrfs_calc_reclaim_metadata_size() returns true,
btrfs_async_reclaim_metadata_space() will not reclaim metadata space, just
return directly and also forget to wake up process which are waiting for
their tickets, so these processes will wait endlessly.
Fstests case generic/172 with mount option "-o compress=lzo" have revealed
this bug in my test machine. Here if we have tickets to handle, we must
handle them first.
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qgroup function may overwrite the saved error 'err' with 0
in case quota is not enabled, and this ends up with a
endless loop in balance because we keep going back to balance
the same block group.
It really should use 'ret' instead.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Suppose you have the following tree in snap1 on a file system mounted with -o
inode_cache so that inode numbers are recycled
└── [ 258] a
└── [ 257] b
and then you remove b, rename a to c, and then re-create b in c so you have the
following tree
└── [ 258] c
└── [ 257] b
and then you try to do an incremental send you will hit
ASSERT(pending_move == 0);
in process_all_refs(). This is because we assume that any recycling of inodes
will not have a pending change in our path, which isn't the case. This is the
case for the DELETE side, since we want to remove the old file using the old
path, but on the create side we could have a pending move and need to do the
normal pending rename dance. So remove this ASSERT() and put a comment about
why we ignore pending_move. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
* Fix P2P dump trigger
* Prevent a potential null dereference in iwlmvm
* Prevent an uninitialized value from being returned in iwlmvm
* Advertise support for channel width change in AP mode
Be defensive about what underlying fs provides us in the returned xattr
list buffer. If it's not properly null terminated, bail out with a warning
insead of BUG.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
Now that overlayfs has xattr handlers for iop->{set,remove}xattr, use
those same handlers for iop->getxattr as well.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Setting POSIX acl may also modify the file mode, so need to copy that up to
the overlay inode.
Reported-by: Eryu Guan <eguan@redhat.com>
Fixes: d837a49bd5 ("ovl: fix POSIX ACL setting")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Commit d837a49bd5 ("ovl: fix POSIX ACL setting") switches from
iop->setxattr from ovl_setxattr to generic_setxattr, so switch from
ovl_removexattr to generic_removexattr as well. As far as permission
checking goes, the same rules should apply in either case.
While doing that, rename ovl_setxattr to ovl_xattr_set to indicate that
this is not an iop->setxattr implementation and remove the unused inode
argument.
Move ovl_other_xattr_set above ovl_own_xattr_set so that they match the
order of handlers in ovl_xattr_handlers.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Fixes: d837a49bd5 ("ovl: fix POSIX ACL setting")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Use an ordinary #ifdef to conditionally include the POSIX ACL handlers
in ovl_xattr_handlers, like the other filesystems do. Flag the code
that is now only used conditionally with __maybe_unused.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Some operations (setxattr/chmod) can make the cached acl stale. We either
need to clear overlay's acl cache for the affected inode or prevent acl
caching on the overlay altogether. Preventing caching has the following
advantages:
- no double caching, less memory used
- overlay cache doesn't go stale when fs clears it's own cache
Possible disadvantage is performance loss. If that becomes a problem
get_acl() can be optimized for overlayfs.
This patch disables caching by pre setting i_*acl to a value that
- has bit 0 set, so is_uncached_acl() will return true
- is not equal to ACL_NOT_CACHED, so get_acl() will not overwrite it
The constant -3 was chosen for this purpose.
Fixes: 39a25b2b37 ("ovl: define ->get_acl() for overlay inodes")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Instead of calling ->get_acl() directly, use get_acl() to get the cached
value.
We will have the acl cached on the underlying inode anyway, because we do
permission checking on the both the overlay and the underlying fs.
So, since we already have double caching, this improves performance without
any cost.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When mounting overlayfs it needs a clean "work" directory under the
supplied workdir.
Previously the mount code removed this directory if it already existed and
created a new one. If the removal failed (e.g. directory was not empty)
then it fell back to a read-only mount not using the workdir.
While this has never been reported, it is possible to get a non-empty
"work" dir from a previous mount of overlayfs in case of crash in the
middle of an operation using the work directory.
In this case the left over state should be discarded and the overlay
filesystem will be consistent, guaranteed by the atomicity of operations on
moving to/from the workdir to the upper layer.
This patch implements cleaning out any files left in workdir. It is
implemented using real recursion for simplicity, but the depth is limited
to 2, because the worst case is that of a directory containing whiteouts
under "work".
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
Clear out posix acl xattrs on workdir and also reset the mode after
creation so that an inherited sgid bit is cleared.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
Setting MS_POSIXACL in sb->s_flags has the side effect of passing mode to
create functions without masking against umask.
Another problem when creating over a whiteout is that the default posix acl
is not inherited from the parent dir (because the real parent dir at the
time of creation is the work directory).
Fix these problems by:
a) If upper fs does not have MS_POSIXACL, then mask mode with umask.
b) If creating over a whiteout, call posix_acl_create() to get the
inherited acls. After creation (but before moving to the final
destination) set these acls on the created file. posix_acl_create() also
updates the file creation mode as appropriate.
Fixes: 39a25b2b37 ("ovl: define ->get_acl() for overlay inodes")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Sudarsana Reddy Kalluru says:
====================
qed*: dcbx fix series.
The series contains several small fixes for qed* dcbx module.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch takes care of clearing the uninitialized buffer before using it.
1. pfc pri-enable bitmap need to be cleared before setting the requested
enable bits. Without this, the un-touched values will be merged with
requested values and sent to MFW.
2. The data in app-entry field need to be cleared before using it.
3. Clear the output data buffer used in qed_dcbx_query_params().
Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Management firmware requires the selection-field (SF) to be set for
configuring the application/protocol entry in IEEE mode. Without this
setting, the app entry will be configured incorrectly in MFW.
Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dcbx configuration is not supported for VF interfaces. Hence don't populate
the callbacks for VFs and also fail the dcbx-query for VFs.
Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry reported a double free on kcm socket, which could
be easily reproduced by:
#include <unistd.h>
#include <sys/syscall.h>
int main()
{
int fd = syscall(SYS_socket, 0x29ul, 0x5ul, 0x0ul, 0, 0, 0);
syscall(SYS_ioctl, fd, 0x89e2ul, 0x20a98000ul, 0, 0, 0);
return 0;
}
This is because on the error path, after we install
the new socket file, we call sock_release() to clean
up the socket, which leaves the fd pointing to a freed
socket. Fix this by calling sys_close() on that fd
directly.
Fixes: ab7ac4eb98 ("kcm: Kernel Connection Multiplexor module")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang says:
====================
net: ethernet: mediatek: a couple of fixes
a couple of fixes come out from integrating with linux-4.8 rc1
they all are verified and workable on linux-4.8 rc1
Changes since v1:
- usage of loops to work out if all required clock are ready instead
of tedious coding
- remove redundant pinctrl setup that is already done by core driver
thanks for careful and patient reviewing by Andrew Lunn
- splitting distinct changes into the separate patches
- change variable naming from err to ret for readable coding
Changes since v2:
- restore to original clock disabling sequence that is changed
accidentally in the last version
- refine the commit log that would cause misunderstanding what has
been done in the changes
- refine the commit log that would cause footnote losing due to
improper delimiter use
Changes since v3:
- fix git rejects caused by mixing a change from net-next, so
remake the patch set based on the current net branch again.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
a lot of parts in the driver uses devm_* APIs to gain benefits from the
device resource management, so devm_mdiobus_alloc is also used instead
of mdiobus_alloc to have more elegant code flow.
Using common code provided by the devm_* helps to
1) have simplified the code flow as [1] says
2) decrease the risk of incorrect error handling by human
3) only a few drivers used it since it was proposed on linux 3.16,
so just hope to promote for this.
Ref:
[1] https://patchwork.ozlabs.org/patch/344093/
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the missing of_node_put() after finishing the usage
of of_get_child_by_name.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
mtk_stop() must be called to stop for freeing DMA
resources acquired and restoring state changed by mtk_open()
firstly when module removal.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
original mdio_cleanup is not in the symmetric place against where
mdio_init is, so relocate mdio_cleanup to the right one.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
these irqs are not used for shared irq and disabled during ethernet stops.
irq requested by devm_request_irq is safe to be freed automatically on
driver detach.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
1) If the return value of devm_clk_get is EPROBE_DEFER, we should
defer probing the driver. The change is verified and works based
on 4.8-rc1 staying with the latest clk-next code for MT7623.
2) Changing with the usage of loops to work out if all clocks
required are fine
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
which net device the SKB is complete for depends on the forward port
on txd4 on the corresponding TX descriptor, but the information isn't
set up well in case of SKB fragments that would lead to watchdog timeout
from the upper layer, so fix it up.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
copy from user fixes.
* 'msm-fixes-4.8' of git://people.freedesktop.org/~robclark/linux:
drm/msm: protect against faults from copy_from_user() in submit ioctl
drm/msm: fix use of copy_from_user() while holding spinlock
Prior to the change the function would blindly deference mm, exe_file
and exe_file->f_inode, each of which could have been NULL or freed.
Use get_task_exe_file to safely obtain stable exe_file.
Signed-off-by: Mateusz Guzik <mguzik@redhat.com>
Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Cc: <stable@vger.kernel.org> # 4.3.x
Signed-off-by: Paul Moore <paul@paul-moore.com>
For more convenient access if one has a pointer to the task.
As a minor nit take advantage of the fact that only task lock + rcu are
needed to safely grab ->exe_file. This saves mm refcount dance.
Use the helper in proc_exe_link.
Signed-off-by: Mateusz Guzik <mguzik@redhat.com>
Acked-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Cc: <stable@vger.kernel.org> # 4.3.x
Signed-off-by: Paul Moore <paul@paul-moore.com>
Fixes for 4.8:
- 2 CI S4 fixes
- error handling fix
* 'drm-fixes-4.8' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: record error code when ring test failed
drm/amd/amdgpu: compute ring test fail during S4 on CI
drm/amd/amdgpu: sdma resume fail during S4 on CI
Pull crypto fixes from Herbert Xu:
"This fixes the following issues:
- Kconfig problem that prevented mxc-rnga from being enabled
- bogus key sizes in qat aes-xts
- buggy aes-xts code in vmx"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: vmx - fix null dereference in p8_aes_xts_crypt
crypto: qat - fix aes-xts key sizes
hwrng: mxc-rnga - Fix Kconfig dependency
commit bc8c20acae ("bridge: multicast: treat igmpv3 report with
INCLUDE and no sources as a leave") seems to have accidentally reverted
commit 47cc84ce0c ("bridge: fix parsing of MLDv2 reports"). This
commit brings back a change to br_ip6_multicast_mld2_report() where
parsing of MLDv2 reports stops when the first group is successfully
added to the MDB cache.
Fixes: bc8c20acae ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We used to delay switching to the new credentials until after we had
mapped the executable (and possible elf interpreter). That was kind of
odd to begin with, since the new executable will actually then _run_
with the new creds, but whatever.
The bigger problem was that we also want to make sure that we turn off
prof events and tracing before we start mapping the new executable
state. So while this is a cleanup, it's also a fix for a possible
information leak.
Reported-by: Robert Święcki <robert@swiecki.net>
Tested-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David Howells <dhowells@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Acked-by: Eric W. Biederman <ebiederm@xmission.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If there aren't enough stripes, reshape will hang. We have a check for
this in new reshape, but miss it for reshape resume, hence we could see
hang in reshape resume. This patch forces enough stripes existed if
reshape resumes.
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
There is a potential deadlock in superblock write. Discard could zero data, so
before discard we must make sure superblock is updated to new log tail.
Updating superblock (either directly call md_update_sb() or depend on md
thread) must hold reconfig mutex. On the other hand, raid5_quiesce is called
with reconfig_mutex hold. The first step of raid5_quiesce() is waitting for all
IO finish, hence waitting for reclaim thread, while reclaim thread is calling
this function and waitting for reconfig mutex. So there is a deadlock. We
workaround this issue with a trylock. The downside of the solution is we could
miss discard if we can't take reconfig mutex. But this should happen rarely
(mainly in raid array stop), so miss discard shouldn't be a big problem.
Cc: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
For algorithms that implement IV generators before the crypto ops,
the IV needed for decryption is initially located in req->src
scatterlist, not in req->iv.
Avoid copying the IV into req->iv by modifying the (givdecrypt)
descriptors to load it directly from req->src.
aead_givdecrypt() is no longer needed and goes away.
Cc: <stable@vger.kernel.org> # 4.3+
Fixes: 479bcc7c5b ("crypto: caam - Convert authenc to new AEAD interface")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The AEAD code path incorrectly uses the child tfm to track the
cryptd refcnt, and then potentially frees the child tfm.
Fixes: 81760ea6a9 ("crypto: cryptd - Add helpers to check...")
Reported-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Added devices ids for acces i/o products quad and octal serial cards
that make use of existing Pericom PI7C9X7954 and PI7C9X7958
configurations .
Signed-off-by: Jimi Damon <jdamon@accesio.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In hwdep interface of fireworks driver, accessing to user space is in a
critical section with disabled local interrupt. Depending on architecture,
accessing to user space can cause page fault exception. Then local
processor stores machine status and handles the synchronous event. A
handler corresponding to the event can call task scheduler to wait for
preparing pages. In a case of usage of single core processor, the state to
disable local interrupt is worse because it don't handle usual interrupts
from hardware.
This commit fixes this bug, performing the accessing outside spinlock. This
commit also gives up counting the number of queued response messages to
simplify ring-buffer management.
Reported-by: Vaishali Thakkar <vaishali.thakkar@oracle.com>
Cc: stable@vger.kernel.org
Fixes: 555e8a8f7f14('ALSA: fireworks: Add command/response functionality into hwdep interface')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since the commit c1a67b48f6 ("serial: 8250_pci: replace switch-case by
formula for Intel MID"), the 8250 driver crashes in the byt_set_termios()
function with a divide error. This is caused by the fact that a baud rate of 0
(B0) is not handled properly. Fix it by falling back to B9600 in this case.
Reported-by: "Mendez Salinas, Fernando" <fernando.mendez.salinas@intel.com>
Fixes: c1a67b48f6 ("serial: 8250_pci: replace switch-case by formula for Intel MID")
Cc: stable@vger.kernel.org
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Attributes declared with __ATTR_PREALLOC use sysfs_kf_read() which returns
zero bytes for non-zero offset. This breaks script checkarray in mdadm tool
in debian where /bin/sh is 'dash' because its builtin 'read' reads only one
byte at a time. Script gets 'i' instead of 'idle' when reads current action
from /sys/block/$dev/md/sync_action and as a result does nothing.
This patch adds trivial implementation of partial read: generate whole
string and move required part into buffer head.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Fixes: 4ef67a8c95 ("sysfs/kernfs: make read requests on pre-alloc files use the buffer.")
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=787950
Cc: Stable <stable@vger.kernel.org> # v3.19+
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5590f3196b ("drivers/core/of: Add symlink to device-tree from
devices with an OF node") added a symlink called "of_node" to sysfs
however the documentation describes it as "of_path".
Fix the documentation to match what the code actually does.
Signed-off-by: Martin Fuzzey <mfuzzey@parkeon.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kernfs_notify_workfn() sends out file modified events for the
scheduled kernfs_nodes. Because the modifications aren't from
userland, it doesn't have the matching file struct at hand and can't
use fsnotify_modify(). Instead, it looked up the inode and then used
d_find_any_alias() to find the dentry and used fsnotify_parent() and
fsnotify() directly to generate notifications.
The assumption was that the relevant dentries would have been pinned
if there are listeners, which isn't true as inotify doesn't pin
dentries at all and watching the parent doesn't pin the child dentries
even for dnotify. This led to, for example, inotify watchers not
getting notifications if the system is under memory pressure and the
matching dentries got reclaimed. It can also be triggered through
/proc/sys/vm/drop_caches or a remount attempt which involves shrinking
dcache.
fsnotify_parent() only uses the dentry to access the parent inode,
which kernfs can do easily. Update kernfs_notify_workfn() so that it
uses fsnotify() directly for both the parent and target inodes without
going through d_find_any_alias(). While at it, supply the target file
name to fsnotify() from kernfs_node->name.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Evgeny Vereshchagin <evvers@ya.ru>
Fixes: d911d98748 ("kernfs: make kernfs_notify() trigger inotify events too")
Cc: John McCutchan <john@johnmccutchan.com>
Cc: Robert Love <rlove@rlove.org>
Cc: Eric Paris <eparis@parisplace.org>
Cc: stable@vger.kernel.org # v3.16+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In hwdep interface of firewire-tascam driver, accessing to user space is
in a critical section with disabled local interrupt. Depending on
architecture, accessing to user space can cause page fault exception. Then
local processor stores machine status and handle the synchronous event. A
handler corresponding to the event can call task scheduler to wait for
preparing pages. In a case of usage of single core processor, the state to
disable local interrupt is worse because it doesn't handle usual interrupts
from hardware.
This commit fixes this bug, by performing the accessing outside spinlock.
Reported-by: Vaishali Thakkar <vaishali.thakkar@oracle.com>
Cc: stable@vger.kernel.org
Fixes: e5e0c3dd257b('ALSA: firewire-tascam: add hwdep interface')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Falcon Ridge 4C has been supported by the driver from the beginning,
Falcon Ridge 2C support was just added. Don't irritate users with a
warning declaring the opposite.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
From: Xavier Gnata <xavier.gnata@gmail.com>
Add support to INTEL_FALCON_RIDGE_2C controller and corresponding quirk
to support suspend/resume.
Tested against 4.7 master on a MacBook Air 11" 2015.
Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The quirk 'quirk_apple_wait_for_thunderbolt' did not fire on Falcon
Ridge 4C controllers with subdevice/subvendor set to zero. This lead
to lost pci devices on system resume.
Older thunderbolt controllers (pre Falcon Ridge) used the same device id
for bridges and for the controller. On Apple hardware the subvendor- &
subdevice-ids were set for the controller, but not for bridges. So that
is what was used to differentiate between the two. Starting with Falcon
Ridge bridges and controllers received different device ids.
Additionally on some MacBookPro models (but not all) the
subvendor/subdevice was zeroed.
Starting with a42fb351c (thunderbolt: Allow loading of module on recent
Apple MacBooks with thunderbolt 2 controller) the thunderbolt driver
binds to all Falcon Ridge 4C controllers (irregardless of
subvendor/subdevice). The corresponding quirk was not updated.
This commit changes the quirk to check the device class instead of its
subvendor-/subdeviceids. This works for all generations of Thunderbolt
controllers.
Signed-off-by: Andreas Noever <andreas.noever@gmail.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lkdtm_rodata_do_nothing() is an empty function which is generated in
order to test the non-executability of rodata.
Currently if function tracing is enabled then an mcount callsite will be
generated for lkdtm_rodata_do_nothing(), and it will appear in the list
of available functions for function tracing (available_filter_functions).
Given it's purpose purely as a test function, it seems preferable for
lkdtm_rodata_do_nothing() to be marked notrace, so it doesn't appear as
traceable.
This also avoids triggering a linker bug on powerpc:
https://sourceware.org/bugzilla/show_bug.cgi?id=20428
When the linker sees code that needs to generate a call stub, eg. a
branch to mcount(), it assumes the section is executable and
dereferences a NULL pointer leading to a linker segfault. Marking
lkdtm_rodata_do_nothing() notrace avoids triggering the bug because the
function contains no other function calls.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Support for QCA9887 is no longer experimental and if there are any issues
we need to address them
Signed-off-by: Mohammed Shafi Shajakhan <mohammed@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Even if PR3 support is available on the bridge, it will not be used if
the PCI layer considers it unavailable (i.e. on all laptops from 2013
and 2014). Ensure that this condition is checked to allow a fallback to
the Optimus DSM for device poweroff.
Initially I wanted to call pci_d3cold_enable before checking bridge_d3
(in case the user changed d3cold_allowed), but that is such an unlikely
case and likely fragile anyway. The current patch is suggested by Mika
in http://www.spinics.net/lists/linux-pci/msg52599.html
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for your net tree,
they are:
1) Allow nf_tables reject expression from input, forward and output hooks,
since only there the routing information is available, otherwise we crash.
2) Fix unsafe list iteration when flushing timeout and accouting objects.
3) Fix refcount leak on timeout policy parsing failure.
4) Unlink timeout object for unconfirmed conntracks too
5) Missing validation of pkttype mangling from bridge family.
6) Fix refcount leak on ebtables on second lookup for the specific
bridge match extension, this patch from Sabrina Dubroca.
7) Remove unnecessary ip_hdr() in nf_tables_netdev family.
Patches from 1-5 and 7 from Liping Zhang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg says:
====================
Three little fixes:
* revert a recent wext patch, which Ben Hutchings noticed was
wrong, and it turns out not to be necessary for any driver
* fix an infinite loop that can occur under certain conditions
in mac80211's TDLS code (depending on regulatory information)
* add a cfg80211_get_station() static inline when cfg80211 isn't
built, to allow other modules to not have to depend on it for it
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit appends a few _rcuidle suffixes to fix the following
RCU-used-from-idle bug:
> ===============================
> [ INFO: suspicious RCU usage. ]
> 4.6.0-rc5-next-20160426+ #1116 Not tainted
> -------------------------------
> include/trace/events/rpm.h:95 suspicious rcu_dereference_check() usage!
>
> other info that might help us debug this:
>
>
> RCU used illegally from idle CPU!
> rcu_scheduler_active = 1, debug_locks = 0
> RCU used illegally from extended quiescent state!
> 1 lock held by swapper/0/0:
> #0: (&(&dev->power.lock)->rlock){-.-...}, at: [<c052cc2c>] __rpm_callback+0x58/0x60
>
> stack backtrace:
> CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1116
> Hardware name: Generic OMAP36xx (Flattened Device Tree)
> [<c0110290>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14)
> [<c010c3a8>] (show_stack) from [<c047fd68>] (dump_stack+0xb0/0xe4)
> [<c047fd68>] (dump_stack) from [<c052d5d0>] (rpm_suspend+0x580/0x768)
> [<c052d5d0>] (rpm_suspend) from [<c052ec58>] (__pm_runtime_suspend+0x64/0x84)
> [<c052ec58>] (__pm_runtime_suspend) from [<c04bf25c>] (omap2_gpio_prepare_for_idle+0x5c/0x70)
> [<c04bf25c>] (omap2_gpio_prepare_for_idle) from [<c0125568>] (omap_sram_idle+0x140/0x244)
> [<c0125568>] (omap_sram_idle) from [<c01269dc>] (omap3_enter_idle_bm+0xfc/0x1ec)
> [<c01269dc>] (omap3_enter_idle_bm) from [<c0601bdc>] (cpuidle_enter_state+0x80/0x3d4)
> [<c0601bdc>] (cpuidle_enter_state) from [<c0183b08>] (cpu_startup_entry+0x198/0x3a0)
> [<c0183b08>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8)
> [<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c)
In the immortal words of Steven Rostedt, "*Whack* *Whack* *Whack*!!!"
Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
WhACKED-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The workqueue "dm_bufio_wq" queues a single work item &dm_bufio_work so
it doesn't require execution ordering. Hence, alloc_workqueue() has
been used to replace the deprecated create_singlethread_workqueue().
The WQ_MEM_RECLAIM flag has been set since DM requires forward progress
under memory pressure.
Since there are fixed number of work items, explicit concurrency
limit is unnecessary here.
Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If crypt_alloc_tfms() had to allocate multiple tfms and it failed before
the last allocation, then it would call crypt_free_tfms() and could free
pointers from uninitialized memory -- due to the crypt_free_tfms() check
for non-zero cc->tfms[i]. Fix by allocating zeroed memory.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
When dm-crypt processes writes, it allocates a new bio in
crypt_alloc_buffer(). The bio is allocated from a bio set and it can
have at most BIO_MAX_PAGES vector entries, however the incoming bio can be
larger (e.g. if it was allocated by bcache). If the incoming bio is
larger, bio_alloc_bioset() fails and an error is returned.
To avoid the error, we test for a too large bio in the function
crypt_map() and use dm_accept_partial_bio() to split the bio.
dm_accept_partial_bio() trims the current bio to the desired size and
asks DM core to send another bio with the rest of the data.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # v3.16+
The kthread_run() function returns either a valid task_struct or
ERR_PTR() value, check for NULL is invalid. This change fixes potential
for oops, e.g. in OOM situation.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Pull seccomp fix from Kees Cook:
"Fix fatal signal delivery after ptrace reordering"
* tag 'seccomp-v4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: Fix tracer exit notifications during fatal signals
This fixes a ptrace vs fatal pending signals bug as manifested in
seccomp now that seccomp was reordered to happen after ptrace. The
short version is that seccomp should not attempt to call do_exit()
while fatal signals are pending under a tracer. The existing code was
trying to be as defensively paranoid as possible, but it now ends up
confusing ptrace. Instead, the syscall can just be skipped (which solves
the original concern that the do_exit() was addressing) and normal signal
handling, tracer notification, and process death can happen.
Paraphrasing from the original bug report:
If a tracee task is in a PTRACE_EVENT_SECCOMP trap, or has been resumed
after such a trap but not yet been scheduled, and another task in the
thread-group calls exit_group(), then the tracee task exits without the
ptracer receiving a PTRACE_EVENT_EXIT notification. Test case here:
https://gist.github.com/khuey/3c43ac247c72cef8c956ca73281c9be7
The bug happens because when __seccomp_filter() detects
fatal_signal_pending(), it calls do_exit() without dequeuing the fatal
signal. When do_exit() sends the PTRACE_EVENT_EXIT notification and
that task is descheduled, __schedule() notices that there is a fatal
signal pending and changes its state from TASK_TRACED to TASK_RUNNING.
That prevents the ptracer's waitpid() from returning the ptrace event.
A more detailed analysis is here:
https://github.com/mozilla/rr/issues/1762#issuecomment-237396255.
Reported-by: Robert O'Callahan <robert@ocallahan.org>
Reported-by: Kyle Huey <khuey@kylehuey.com>
Tested-by: Kyle Huey <khuey@kylehuey.com>
Fixes: 93e35efb8d ("x86/ptrace: run seccomp after ptrace")
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: James Morris <james.l.morris@oracle.com>
The intent was to make sure people don't sneak in a small immediate or
something to change the interpretation of the uniform update args, but
these signals are just fine.
Fixes a validation failure in the current X server on some Render
operation.
Signed-off-by: Eric Anholt <eric@anholt.net>
bio_alloc() can allocate a bio with at most BIO_MAX_PAGES (256) vector
entries. However, the incoming bio may have more vector entries if it
was allocated by other means. For example, bcache submits bios with
more than BIO_MAX_PAGES entries. This results in bio_alloc() failure.
To avoid the failure, change the code so that it allocates bio with at
most BIO_MAX_PAGES entries. If the incoming bio has more entries,
bio_add_page() will fail and a new bio will be allocated - the code that
handles bio_add_page() failure already exists in the dm-log-writes
target.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Josef Bacik <jbacik@fb,com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # v4.1+
Move log_one_block()'s atomic_inc(&lc->io_blocks) before bio_alloc() to
fix a bug that the target hangs if bio_alloc() fails. The error path
does put_io_block(lc), so atomic_inc(&lc->io_blocks) must occur before
invoking the error path to avoid underflow of lc->io_blocks.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Josef Bacik <jbacik@fb,com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
Pull MD fixes from Shaohua Li:
"This includes several bug fixes:
- Alexey Obitotskiy fixed a hang for faulty raid5 array with external
management
- Song Liu fixed two raid5 journal related bugs
- Tomasz Majchrzak fixed a bad block recording issue and an
accounting issue for raid10
- ZhengYuan Liu fixed an accounting issue for raid5
- I fixed a potential race condition and memory leak with DIF/DIX
enabled
- other trival fixes"
* tag 'md/4.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
raid5: avoid unnecessary bio data set
raid5: fix memory leak of bio integrity data
raid10: record correct address of bad block
md-cluster: fix error return code in join()
r5cache: set MD_JOURNAL_CLEAN correctly
md: don't print the same repeated messages about delayed sync operation
md: remove obsolete ret in md_start_sync
md: do not count journal as spare in GET_ARRAY_INFO
md: Prevent IO hold during accessing to faulty raid5 array
MD: hold mddev lock to change bitmap location
raid5: fix incorrectly counter of conf->empty_inactive_list_nr
raid10: increment write counter after bio is split
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
Stable patches:
- Fix a refcount leak in nfs_callback_up_net
- Fix an Oopsable condition when the flexfile pNFS driver connection
to the DS fails
- Fix an Oopsable condition in NFSv4.1 server callback races
- Ensure pNFS clients stop doing I/O to the DS if their lease has
expired, as required by the NFSv4.1 protocol
Bugfixes:
- Fix potential looping in the NFSv4.x migration code
- Patch series to close callback races for OPEN, LAYOUTGET and
LAYOUTRETURN
- Silence WARN_ON when NFSv4.1 over RDMA is in use
- Fix a LAYOUTCOMMIT race in the pNFS/blocks client
- Fix pNFS timeout issues when the DS fails"
* tag 'nfs-for-4.8-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4.x: Fix a refcount leak in nfs_callback_up_net
NFS4: Avoid migration loops
pNFS/flexfiles: Fix an Oopsable condition when connection to the DS fails
NFSv4.1: Remove obsolete and incorrrect assignment in nfs4_callback_sequence
NFSv4.1: Close callback races for OPEN, LAYOUTGET and LAYOUTRETURN
NFSv4.1: Defer bumping the slot sequence number until we free the slot
NFSv4.1: Delay callback processing when there are referring triples
NFSv4.1: Fix Oopsable condition in server callback races
SUNRPC: Silence WARN_ON when NFSv4.1 over RDMA is in use
pnfs/blocklayout: update last_write_offset atomically with extents
pNFS: The client must not do I/O to the DS if it's lease has expired
pNFS: Handle NFS4ERR_OLD_STATEID correctly in LAYOUTSTAT calls
pNFS/flexfiles: Set reasonable default retrans values for the data channel
NFS: Allow the mount option retrans=0
pNFS/flexfiles: Fix layoutstat periodic reporting
There are three usercopy warnings which are currently being silenced for
gcc 4.6 and newer:
1) "copy_from_user() buffer size is too small" compile warning/error
This is a static warning which happens when object size and copy size
are both const, and copy size > object size. I didn't see any false
positives for this one. So the function warning attribute seems to
be working fine here.
Note this scenario is always a bug and so I think it should be
changed to *always* be an error, regardless of
CONFIG_DEBUG_STRICT_USER_COPY_CHECKS.
2) "copy_from_user() buffer size is not provably correct" compile warning
This is another static warning which happens when I enable
__compiletime_object_size() for new compilers (and
CONFIG_DEBUG_STRICT_USER_COPY_CHECKS). It happens when object size
is const, but copy size is *not*. In this case there's no way to
compare the two at build time, so it gives the warning. (Note the
warning is a byproduct of the fact that gcc has no way of knowing
whether the overflow function will be called, so the call isn't dead
code and the warning attribute is activated.)
So this warning seems to only indicate "this is an unusual pattern,
maybe you should check it out" rather than "this is a bug".
I get 102(!) of these warnings with allyesconfig and the
__compiletime_object_size() gcc check removed. I don't know if there
are any real bugs hiding in there, but from looking at a small
sample, I didn't see any. According to Kees, it does sometimes find
real bugs. But the false positive rate seems high.
3) "Buffer overflow detected" runtime warning
This is a runtime warning where object size is const, and copy size >
object size.
All three warnings (both static and runtime) were completely disabled
for gcc 4.6 with the following commit:
2fb0815c9e ("gcc4: disable __compiletime_object_size for GCC 4.6+")
That commit mistakenly assumed that the false positives were caused by a
gcc bug in __compiletime_object_size(). But in fact,
__compiletime_object_size() seems to be working fine. The false
positives were instead triggered by #2 above. (Though I don't have an
explanation for why the warnings supposedly only started showing up in
gcc 4.6.)
So remove warning #2 to get rid of all the false positives, and re-enable
warnings #1 and #3 by reverting the above commit.
Furthermore, since #1 is a real bug which is detected at compile time,
upgrade it to always be an error.
Having done all that, CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is no longer
needed.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Nilay Vaish <nilayvaish@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull libata fixes from Tejun Heo:
"Two libata driver specific fixes for v4.8-rc4. Nothing too scary"
* 'for-4.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
pata_ninja32: Avoid corrupting status flags
ahci: disable correct irq for dummy ports
Pull cgroup fixes from Tejun Heo:
"Two fixes for cgroup.
- There still was a hole in enforcing cpuset rules, fixed by Li.
- The recent switch to global percpu_rwseom for threadgroup locking
revealed a couple issues in how percpu_rwsem is implemented and
used by cgroup. Balbir found that the read locking section was too
wide unnecessarily including operations which can often depend on
IOs. With percpu_rwsem updates (coming through a different tree)
and reduction of read locking section, all the reported locking
latency issues, including the android one, are resolved.
It looks like we can keep global percpu_rwsem locking for now. If
there actually are cases which can't be resolved, we can go back to
more complex per-signal_struct locking"
* 'for-4.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: reduce read locked section of cgroup_threadgroup_rwsem during fork
cpuset: make sure new tasks conform to the current config of the cpuset
Ninja32 needs to set some flags to indicate it does 32bit IO. However it currently assigns this which
loses the initializing flag and causes a warning spew. Fix it to use a logical or as is intended.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Tested-by: Ellmar Stelnberger <estellnb@elstel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
If a server returns itself as a location while migrating, the client may
end up getting stuck attempting to migrate twice to the same server. Catch
this by checking if the nfs_client found is the same as the existing
client. For the other two callers to nfs4_set_client, the nfs_client will
always be ERR_PTR(-EINVAL).
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Sunrise Point PCH with SPS Firmware doesn't expose working
MEI interface, we need to quirk it out.
The SPS Firmware is identifiable only on the first PCI function
of the device.
Cc: <stable@vger.kernel.org> #4.6+
Tested-by: Sujith Pandel <sujith_pandel@dell.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we have USB gadgets disabled and USB_MUSB_HOST set, we get
errors "possible irq lock inverssion dependency detected"
errors during boot.
Let's fix the issue by adding start_musb flag and start
the controller after we're out of the spinlock protected
section.
Reported-by: Ladislav Michl <ladis@linux-mips.org>
Tested-by: Ladislav Michl <ladis@linux-mips.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KVM: s390: Fix for fpu register errors since 4.7
This fixes a regression that was introduced by a semantic
change in commit 3f6813b9a5 ("s390/fpu: allocate 'struct
fpu' with the task_struct"). Symptoms are broken host userspace
fpu registers if the old FPU set/get ioctls are used.
Kishon writes:
phy: for 4.8 -rc
*) Fix to get host-only mode working in sun4i
*) Fix a compilation error because of missing header file
*) Other minor fixes
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Peter writes:
Fix one bug that host can't work after insmod gadget module
at dual-role mode, the root cause of this issue is the usbcmd.rs
is cleared by chipidea udc code.
i.MX6SX has bypass PMIC ready function, as this function
is normally NOT enabled on the board design, so we need
to bypass the PMIC ready pin check during DSM mode resume
flow, otherwise, the internal DSM resume logic will be
waiting for this signal to be ready forever and cause
resume fail.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Fixes: ff843d621b ("ARM: imx: add suspend support for i.mx6sx")
Cc: <stable@vger.kernel.org>
Tested-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We have already use skb_header_pointer to get the ip header pointer,
so there's no need to use ip_hdr again. Moreover, in NETDEV INGRESS
hook, ip header maybe not linear, so use ip_hdr is not appropriate,
remove it.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The Exynos PMU node is an interrupt, clock and PMU (Power Management Unit)
controller, and these functionalities are supported by different drivers
that matches the same compatible strings.
Since commit 15cc2ed6dc ("of/irq: Mark initialised interrupt controllers
as populated") the OF core flags interrupt controllers registered with the
IRQCHIP_DECLARE() macro as OF_POPULATED, so platform devices with the same
compatible string as the interrupt controller will not be registered.
This prevents the PMU platform device to be registered so the Exynos PMU
driver is never probed. This breaks (among other things) Suspend-to-RAM.
Fix this by clearing the OF_POPULATED flag in the PMU IRQ init callback,
to allow the Exynos PMU platform driver to be probed. The patch is based
on Philipp Zabel's "ARM: imx6: mark GPC node as not populated after irq
init to probe pm domain driver".
Fixes: 15cc2ed6dc ("of/irq: Mark initialised interrupt controllers as populated")
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The subwoofer on Inspiron 7559 was disabled originally.
Applying a pin fixup to node 0x1b can enable it and make it work.
Old pin: 0x411111f0
New pin: 0x90170151
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The atomic conversion lost the notification to let the DRM core
know about the current state of the CRTC vblank interrupts. This
regressed the ability of the core to reject page flip attempts
on currently disabled CRTCs. Add back the notifications.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This allows modules using this function (currently: batman-adv) to
compile even if cfg80211 is not built at all, thus relaxing
dependencies.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Christoph reports slab corruption when a deferred refcount update
aborts during _defer_finish(). The cause of this was broken log item
state tracking in xfs_defer_pending -- upon an abort,
_defer_trans_abort() will call abort_intent on all intent items,
including the ones that have already had a done item attached.
This is incorrect because each intent item has 2 refcount: the first
is released when the intent item is committed to the log; and the
second is released when the _done_ item is committed to the log, or
by the intent creator if there is no done item. In other words, once
we log the done item, responsibility for releasing the intent item's
second refcount is transferred to the done item and /must not/ be
performed by anything else.
The dfp_committed flag should have been tracking whether or not we had
a done item so that _defer_trans_abort could decide if it needs to
abort the intent item, but due to a thinko this was not the case. Rip
it out and track the done item directly so that we do the right thing
w.r.t. intent item freeing.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reported-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Pull hwmon fix from Guenter Roeck:
"Add missing sysfs attribute group terminator to it87 driver"
* tag 'hwmon-for-linus-v4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (it87) Add missing sysfs attribute group terminator
Some fixes for rk3399 register errors that revealed themself
during actual use.
* tag 'v4.8-rockchip-clk-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: mark aclk_emmc_noc as a critical clock on rk3399
clk: rockchip: fix incorrect GATE bits for {c, g}pll_aclk_perihp_src on rk3399
clk: rockchip: fix incorrect aclk_emmc source gate bits on rk3399
clk: rockchip: fix rk3399 aclk_vio gate bit
dma_request_chan() can fail returning an error pointer. In this case
prevent calling dma_release_channel() to prevent a ERR_PTR() dereference.
As error path can be called even with no DMA configuration, info->dma can
be NULL so don't call dma_release_channel() for that case either.
Fixes: de3bfc4a16: ("mtd: nand: omap2: fix return value check in omap_nand_probe()")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Pull ext4 fixes from Ted Ts'o:
"Fix bugs that could cause kernel deadlocks or file system corruption
while moving xattrs to expand the extended inode.
Also add some sanity checks to the block group descriptors to make
sure we don't end up overwriting the superblock"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: avoid deadlock when expanding inode size
ext4: properly align shifted xattrs when expanding inodes
ext4: fix xattr shifting when expanding inodes part 2
ext4: fix xattr shifting when expanding inodes
ext4: validate that metadata blocks do not overlap superblock
ext4: reserve xattr index for the Hurd
Pull networking fixes from David Miller:
1) Segregate namespaces properly in conntrack dumps, from Liping Zhang.
2) tcp listener refcount fix in netfilter tproxy, from Eric Dumazet.
3) Fix timeouts in qed driver due to xmit_more, from Yuval Mintz.
4) Fix use-after-free in tcp_xmit_retransmit_queue().
5) Userspace header fixups (use of __u32, missing includes, etc.) from
Mikko Rapeli.
6) Further refinements to fragmentation wrt gso and tunnels, from
Shmulik Ladkani.
7) Trigger poll correctly for zero length UDP packets, from Eric
Dumazet.
8) TCP window scaling fix, also from Eric Dumazet.
9) SLAB_DESTROY_BY_RCU is not relevant any more for UDP sockets.
10) Module refcount leak in qdisc_create_dflt(), from Eric Dumazet.
11) Fix deadlock in cp_rx_poll() of 8139cp driver, from Gao Feng.
12) Memory leak in rhashtable's alloc_bucket_locks(), from Eric Dumazet.
13) Add new device ID to alx driver, from Owen Lin.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits)
Add Killer E2500 device ID in alx driver.
net: smc91x: fix SMC accesses
Documentation: networking: dsa: Remove platform device TODO
net/mlx5: Increase number of ethtool steering priorities
net/mlx5: Add error prints when validate ETS failed
net/mlx5e: Fix memory leak if refreshing TIRs fails
net/mlx5e: Add ethtool counter for TX xmit_more
net/mlx5e: Fix ethtool -g/G rx ring parameter report with striding RQ
net/mlx5e: Don't wait for SQ completions on close
net/mlx5e: Don't post fragmented MPWQE when RQ is disabled
net/mlx5e: Don't wait for RQ completions on close
net/mlx5e: Limit UMR length to the device's limitation
rhashtable: fix a memory leak in alloc_bucket_locks()
sfc: fix potential stack corruption from running past stat bitmask
team: loadbalance: push lacpdus to exact delivery
net: hns: dereference ppe_cb->ppe_common_cb if it is non-null
8139cp: Fix one possible deadloop in cp_rx_poll
i40e: Change some init flow for the client
Revert "phy: IRQ cannot be shared"
net: dsa: bcm_sf2: Fix race condition while unmasking interrupts
...
The iwlmvm driver supports channel width change in AP mode. Add the
proper flag.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
fw-dbg code return ret but that variable was either 0
or not initialised. Return 0 always.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Fixes: 6a95126763 ("iwlwifi: mvm: send dbg config hcmds to fw if set in tlv")
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When the user really wanted a dump on P2P Client, he
coudln't get it because we checked vif->type but didn't
take vif->p2p into account. Fix that.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
If the attempt to connect to a DS fails inside ff_layout_pg_init_read or
ff_layout_pg_init_write, then we currently end up clearing the layout
segment carried by the struct nfs_pageio_descriptor, causing an Oops
when we later call into ff_layout_read_pagelist/ff_layout_write_pagelist.
The fix is to ensure we return the layout and then retry.
Fixes: 446ca21953 ("pNFS/flexfiles: When initing reads or writes, we...")
Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Pull x86 platform driver fixes from Darren Hart:
"Remove module related code from two drivers that are only configurable
as built-in: intel_pmic_gpio and platform/olpc"
* tag 'platform-drivers-x86-v4.8-4' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
intel_pmic_gpio: Make explicitly non-modular
platform/olpc: Make ec explicitly non-modular
Pull powerpc fixes from Ben Herrenschmidt:
"This was meant to be sent early last week, but I has a change pending
on one of the fixes and other things made me forget all about. Ugh.
We have some misc fixes for powerpc 4.8. Some trivial bits and some
regressions, and a trivial cleanup or two that I saw no point in
letting rot in patchwork"
* tag 'powerpc-4.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: signals: Discard transaction state from signal frames
powerpc/powernv : Drop reference added by kset_find_obj()
powerpc/tm: do not use r13 for tabort_syscall
powerpc: move hmi.c to arch/powerpc/kvm/
powerpc: sysdev: cpm: fix gpio save_regs functions
powerpc/pseries: PACA save area fix for MCE vs MCE
powerpc/pseries: PACA save area fix for general exception vs MCE
powerpc/prom: Fix sub-processor option passed to ibm, client-architecture-support
powerpc, hotplug: Avoid to touch non-existent cpumasks.
powerpc: migrate exception table users off module.h and onto extable.h
powerpc/powernv/pci: fix iterator signedness
powerpc/pseries: use pci_host_bridge.release_fn() to kfree(phb)
cxl: use pcibios_free_controller_deferred() when removing vPHBs
powerpc: mpc8349emitx: Delete unnecessary assignment for the field "owner"
powerpc/512x: Delete unnecessary assignment for the field "owner"
drivers/macintosh: Delete owner assignment
powerpc: cputhreads: Add missing include file
ath.git fixes for 4.8. Major changes:
ath9k
* fix regression in client mode beacon configuration
* fix a station pointer which resulted in spurious crashes
Passing the trigger-less mode option on the command line causes
iio_generic_buffer to fail searching for an IIO trigger.
Fix this by skipping trigger initialization if trigger-less mode is
requested.
Technically it actually fixes:
7c7e9dad70 where the bug was introduced but as the window to the patch
below that changes the context was very small let's mark it with that.
Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com>
Fixes: deb4d1fdcb ("iio: generic_buffer: Fix --trigger-num option")
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Avoid getting sample rate on B850V3 CP2114 as it is unsupported and
causes noisy "current rate is different from the runtime rate" messages
when playback starts.
Signed-off-by: Ken Lin <ken.lin@advantech.com.tw>
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Sagi writes:
Mostly stability fixes and cleanups:
- NQN endianess fix from Daniel
- possible use-after-free fix from Vincent
- nvme-rdma connect semantics fixes from Jay
- Remove redundant variables in rdma driver
- Kbuild fix from Christoph
- nvmf_host referencing fix from Christoph
- uninit variable fix from Colin
Fix misspelled "ti,x-plate-ohms" property name of TI TSC2046
touchscreen controller.
Fixes: d09e6beafa ("ARM: dts: imx7d-sdb: Add support for touchscreen")
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
We get 2 warnings when biuld kernel with W=1:
drivers/mailbox/bcm-pdc-mailbox.c:472:6: warning: no previous prototype for 'pdc_setup_debugfs' [-Wmissing-prototypes]
drivers/mailbox/bcm-pdc-mailbox.c:488:6: warning: no previous prototype for 'pdc_free_debugfs' [-Wmissing-prototypes]
In fact, these functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
so this patch marks these functions with 'static'.
Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
The previous fix introduced a check against the ret variable which
is not defined, hence producing a compilation error:
linux/drivers/clocksource/timer-atmel-pit.c: In function ‘at91sam926x_pit_dt_init’:
linux/drivers/clocksource/timer-atmel-pit.c:264:2: error: ‘ret’ undeclared (first use in this function)
ret = clk_prepare_enable(data->mck);
^
linux/drivers/clocksource/timer-atmel-pit.c:264:2: note: each undeclared identifier is reported only once for each function it appears in
Add the missing the variable 'ret'.
Fixes: 504f34c9e4 "clocksource/drivers/atmel-pit: Convert init function to return error"
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: alexandre.belloni@free-electrons.com
Cc: motobud@gmail.com
Cc: realbright@lgcns.com
Link: http://lkml.kernel.org/r/1472453043-24287-1-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The Kconfig entry controlling compilation of this code is:
drivers/platform/x86/Kconfig:config GPIO_INTEL_PMIC
drivers/platform/x86/Kconfig: bool "Intel PMIC GPIO support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.
We delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
We don't replace module.h with init.h since the file already has that.
Cc: Alek Du <alek.du@intel.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
The Kconfig entry controlling compilation of this code is:
arch/x86/Kconfig:config OLPC
arch/x86/Kconfig: bool "One Laptop Per Child support"
...meaning that it currently is not being built as a module by anyone.
Lets remove the couple traces of modular infrastructure use, so that
when reading the driver there is no doubt it is builtin-only.
We delete the MODULE_LICENSE tag etc. since all that information
was (or is now) contained at the top of the file in the comments.
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Acked-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Commit b70661c708 ("net: smc91x: use run-time configuration on all ARM
machines") broke some ARM platforms through several mistakes. Firstly,
the access size must correspond to the following rule:
(a) at least one of 16-bit or 8-bit access size must be supported
(b) 32-bit accesses are optional, and may be enabled in addition to
the above.
Secondly, it provides no emulation of 16-bit accesses, instead blindly
making 16-bit accesses even when the platform specifies that only 8-bit
is supported.
Reorganise smc91x.h so we can make use of the existing 16-bit access
emulation already provided - if 16-bit accesses are supported, use
16-bit accesses directly, otherwise if 8-bit accesses are supported,
use the provided 16-bit access emulation. If neither, BUG(). This
exactly reflects the driver behaviour prior to the commit being fixed.
Since the conversion incorrectly cut down the available access sizes on
several platforms, we also need to go through every platform and fix up
the overly-restrictive access size: Arnd assumed that if a platform can
perform 32-bit, 16-bit and 8-bit accesses, then only a 32-bit access
size needed to be specified - not so, all available access sizes must
be specified.
This likely fixes some performance regressions in doing this: if a
platform does not support 8-bit accesses, 8-bit accesses have been
emulated by performing a 16-bit read-modify-write access.
Tested on the Intel Assabet/Neponset platform, which supports only 8-bit
accesses, which was broken by the original commit.
Fixes: b70661c708 ("net: smc91x: use run-time configuration on all ARM machines")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 83c0afaec7 ("net: dsa: Add new binding implementation"),
the shortcomings of the dsa platform device have been addressed, remove
that TODO item.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Saeed Mahameed says:
====================
Mellanox 100G mlx5 fixes 2016-08-29
This series contains some bug fixes for the mlx5 core and mlx5
ethernet driver.
From Saeed, Fix UMR to consider hardware translation table field
size limitation when calculating the maximum number of MTTs required
by the driver. Three patches to speed-up netdevice close time by
serializing channel (SQs & RQs) destruction rather than issuing and
waiting for hardware interrupts to free them.
From Eran, Fix ethtool ring parameter reporting for striding RQ layout.
Add error prints on ETS validation failure.
From Kamal, Fix memory leak on error flow.
From Maor, Fix ethtool steering priorities number.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ethtool has 11 flow tables, each flow table has its own priority.
Increase the number of priorities to be aligned with the number of flow
tables.
Fixes: 1174fce8d1 ('net/mlx5e: Support l3/l4 flow type specs in ethtool flow steering')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Upon set ETS failure due to user invalid input, add error prints to
specify the exact error to the user.
Fixes: cdcf11212b ('net/mlx5e: Validate BW weight values of ETS')
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Free 'in' command object also when mlx5_core_modify_tir fails.
Fixes: 724b2aa151 ("net/mlx5e: TIRs management refactoring")
Signed-off-by: Kamal Heib <kamalh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a counter in ethtool for the number of times that
TX xmit_more was used.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver RQ has two possible configurations: striding RQ and
non-striding RQ. Until this patch, the driver always reported the
number of hardware WQEs (ring descriptors). For non striding RQ
configuration, this was OK since we have one WQE per pending packet
For striding RQ, multiple packets can fit into one WQE. For better
user experience we normalize the rx_pending parameter (size of wqe/mtu)
as the average ring size in case of striding RQ.
Fixes: 461017cb00 ('net/mlx5e: Support RX multi-packet WQE ...')
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of asking the firmware to flush the SQ (Send Queue) via
asynchronous completions when moved to error, we handle SQ flush
manually (mlx5e_free_tx_descs) same as we did when SQ flush got
timed out or on tx_timeout.
This will reduce SQs flush time and speedup interface down procedure.
Moved mlx5e_free_tx_descs to the end of en_tx.c for tx
critical code locality.
Fixes: 29429f3300 ('net/mlx5e: Timeout if SQ doesn't flush during close')
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ICO (Internal control operations) SQ (Send Queue) is closed/disabled
after RQ (Receive Queue). After RQ is closed an ICO SQ completion
might post a fragmented MPWQE (Multi Packet Work Queue Element) into
that RQ.
As on regular RQ post, check if we are allowed to post to that
RQ (RQ is enabled). Cleanup in-progress UMR MPWQE on mlx5e_free_rx_descs
if needed.
Fixes: bc77b240b3 ('net/mlx5e: Add fragmented memory support for RX multi packet WQE')
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This will significantly reduce receive queue flush time on interface
down.
Instead of asking the firmware to flush the RQ (Receive Queue) via
asynchronous completions when moved to error, we handle RQ flush
manually (mlx5e_free_rx_descs) same as we did when RQ flush got timed
out.
This will reduce RQs flush time and speedup interface down procedure
(ifconfig down) from 6 sec to 0.3 sec on a 48 cores system.
Moved mlx5e_free_rx_descs en_main.c where it is needed, to keep en_rx.c
free form non critical data path code for better code locality.
Fixes: 6cd392a082 ('net/mlx5e: Handle RQ flush in error cases')
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ConnectX-4 UMR (User Memory Region) MTT translation table offset in WQE
is limited to U16_MAX, before this patch we ignored that limitation and
requested the maximum possible UMR translation length that the netdev
might need (MAX channels * MAX pages per channel).
In case of a system with #cores > 32 and when linear WQE allocation fails,
falling back to using UMR WQEs will cause the RQ (Receive Queue) to get
stuck.
Here we limit UMR length to min(U16_MAX, max required pages) (while
considering the required alignments) on driver load, by default U16_MAX is
sufficient since the default RX rings value guarantees that we are in
range, dynamically (on set_ringparam/set_channels) we will check if the
new required UMR length (num mtts) is still in range, if not, fail the
request.
Fixes: bc77b240b3 ('net/mlx5e: Add fragmented memory support for RX multi packet WQE')
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Userspace can begin and suspend a transaction within the signal
handler which means they might enter sys_rt_sigreturn() with the
processor in suspended state.
sys_rt_sigreturn() wants to restore process context (which may have
been in a transaction before signal delivery). To do this it must
restore TM SPRS. To achieve this, any transaction initiated within the
signal frame must be discarded in order to be able to restore TM SPRs
as TM SPRs can only be manipulated non-transactionally..
>From the PowerPC ISA:
TM Bad Thing Exception [Category: Transactional Memory]
An attempt is made to execute a mtspr targeting a TM register in
other than Non-transactional state.
Not doing so results in a TM Bad Thing:
[12045.221359] Kernel BUG at c000000000050a40 [verbose debug info unavailable]
[12045.221470] Unexpected TM Bad Thing exception at c000000000050a40 (msr 0x201033)
[12045.221540] Oops: Unrecoverable exception, sig: 6 [#1]
[12045.221586] SMP NR_CPUS=2048 NUMA PowerNV
[12045.221634] Modules linked in: xt_CHECKSUM iptable_mangle ipt_MASQUERADE
nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4
xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp bridge stp llc ebtable_filter
ebtables ip6table_filter ip6_tables iptable_filter ip_tables x_tables kvm_hv kvm
uio_pdrv_genirq ipmi_powernv uio powernv_rng ipmi_msghandler autofs4 ses enclosure
scsi_transport_sas bnx2x ipr mdio libcrc32c
[12045.222167] CPU: 68 PID: 6178 Comm: sigreturnpanic Not tainted 4.7.0 #34
[12045.222224] task: c0000000fce38600 ti: c0000000fceb4000 task.ti: c0000000fceb4000
[12045.222293] NIP: c000000000050a40 LR: c0000000000163bc CTR: 0000000000000000
[12045.222361] REGS: c0000000fceb7ac0 TRAP: 0700 Not tainted (4.7.0)
[12045.222418] MSR: 9000000300201033 <SF,HV,ME,IR,DR,RI,LE,TM[SE]> CR: 28444280 XER: 20000000
[12045.222625] CFAR: c0000000000163b8 SOFTE: 0 PACATMSCRATCH: 900000014280f033
GPR00: 01100000b8000001 c0000000fceb7d40 c00000000139c100 c0000000fce390d0
GPR04: 900000034280f033 0000000000000000 0000000000000000 0000000000000000
GPR08: 0000000000000000 b000000000001033 0000000000000001 0000000000000000
GPR12: 0000000000000000 c000000002926400 0000000000000000 0000000000000000
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR24: 0000000000000000 00003ffff98cadd0 00003ffff98cb470 0000000000000000
GPR28: 900000034280f033 c0000000fceb7ea0 0000000000000001 c0000000fce390d0
[12045.223535] NIP [c000000000050a40] tm_restore_sprs+0xc/0x1c
[12045.223584] LR [c0000000000163bc] tm_recheckpoint+0x5c/0xa0
[12045.223630] Call Trace:
[12045.223655] [c0000000fceb7d80] [c000000000026e74] sys_rt_sigreturn+0x494/0x6c0
[12045.223738] [c0000000fceb7e30] [c0000000000092e0] system_call+0x38/0x108
[12045.223806] Instruction dump:
[12045.223841] 7c800164 4e800020 7c0022a6 f80304a8 7c0222a6 f80304b0 7c0122a6 f80304b8
[12045.223955] 4e800020 e80304a8 7c0023a6 e80304b0 <7c0223a6> e80304b8 7c0123a6 4e800020
[12045.224074] ---[ end trace cb8002ee240bae76 ]---
It isn't clear exactly if there is really a use case for userspace
returning with a suspended transaction, however, doing so doesn't (on
its own) constitute a bad frame. As such, this patch simply discards
the transactional state of the context calling the sigreturn and
continues.
Reported-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Tested-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Reviewed-by: Laurent Dufour <ldufour@linux.vnet.ibm.com>
Acked-by: Simon Guo <wei.guo.simon@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
In a situation, where Linux kernel gets notified about duplicate error log
from OPAL, it is been observed that kernel fails to remove sysfs entries
(/sys/firmware/opal/elog/0xXXXXXXXX) of such error logs. This is because,
we currently search the error log/dump kobject in the kset list via
'kset_find_obj()' routine. Which eventually increment the reference count
by one, once it founds the kobject.
So, unless we decrement the reference count by one after it found the kobject,
we would not be able to release the kobject properly later.
This patch adds the 'kobject_put()' which was missing earlier.
Signed-off-by: Mukesh Ojha <mukesh02@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Reviewed-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
tabort_syscall runs with RI=1, so a nested recoverable machine
check will load the paca into r13 and overwrite what we loaded
it with, because exceptions returning to privileged mode do not
restore r13.
Fixes: b4b56f9eca (powerpc/tm: Abort syscalls in active transactions)
Cc: stable@vger.kernel.org
Signed-off-by: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Filesystems like XFS that use extents should not set the
FIEMAP_EXTENT_MERGED flag in the fiemap extent structures. To allow
for both behaviors for the upcoming gfs2 usage split the iomap
type field into type and flags, and only set FIEMAP_EXTENT_MERGED if
the IOMAP_F_MERGED flag is set. The flags field will also come in
handy for future features such as shared extents on reflink-enabled
file systems.
Reported-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Pull drm fixes from Dave Airlie:
"A bunch of fixes covering i915, amdgpu, one tegra and some core DRM
ones. Nothing too strange at this point"
* tag 'drm-fixes-for-4.8-rc4' of git://people.freedesktop.org/~airlied/linux: (21 commits)
drm/atomic: Don't potentially reset color_mgmt_changed on successive property updates.
drm: Protect fb_defio in drivers with CONFIG_KMS_FBDEV_EMULATION
drm/amdgpu: skip TV/CV in display parsing
drm/amdgpu: avoid a possible array overflow
drm/amdgpu: fix lru size grouping v2
drm/tegra: dsi: Enhance runtime power management
drm/i915: Fix botched merge that downgrades CSR versions.
drm/i915/skl: Ensure pipes with changed wms get added to the state
drm/i915/gen9: Only copy WM results for changed pipes to skl_hw
drm/i915/skl: Add support for the SAGV, fix underrun hangs
drm/i915/gen6+: Interpret mailbox error flags
drm/i915: Reattach comment, complete type specification
drm/i915: Unconditionally flush any chipset buffers before execbuf
drm/i915/gen9: Drop invalid WARN() during data rate calculation
drm/i915/gen9: Initialize intel_state->active_crtcs during WM sanitization (v2)
drm: Reject page_flip for !DRIVER_MODESET
drm/amdgpu: fix timeout value check in amd_sched_job_recovery
drm/amdgpu: fix sdma_v2_4_ring_test_ib
drm/amdgpu: fix amdgpu_move_blit on 32bit systems
drm/radeon: fix radeon_move_blit on 32bit systems
...
Due to assigning the 'replaced' value instead of or'ing it,
if drm_atomic_crtc_set_property() gets called multiple times,
the last call will define the color_mgmt_changed flag, so
a non-updating call to a property can reset the flag and
prevent actual hw state updates required by preceding
property updates.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: <stable@vger.kernel.org> # v4.6+
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Defer freeing the slot until after we have processed the results from
OPEN and LAYOUTGET. This means that the server can rely on the
mechanism in RFC5661 Section 2.10.6.3 to ensure that replies to an
OPEN or LAYOUTGET/RETURN RPC call don't race with the callbacks that
apply to them.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
For operations like OPEN or LAYOUTGET, which return recallable state
(i.e. delegations and layouts) we want to enable the mechanism for
resolving recall races in RFC5661 Section 2.10.6.3.
To do so, we will want to defer bumping the slot's sequence number until
we have finished processing the RPC results.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If CB_SEQUENCE tells us that the processing of this request depends on
the completion of one or more referring triples (see RFC 5661 Section
2.10.6.3), delay the callback processing until after the RPC requests
being referred to have completed.
If we end up delaying for more than 1/2 second, then fall back to
returning NFS4ERR_DELAY in reply to the callback.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The slot table hasn't been an array since v3.7. Ensure that we
use nfs4_lookup_slot() to access the slot correctly.
Fixes: 87dda67e73 ("NFSv4.1: Allow SEQUENCE to resize the slot table...")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org # v3.8+
Pull perf fixes from Thomas Gleixner:
"A few fixes from the perf departement
- prevent a imbalanced preemption disable in the events teardown code
- prevent out of bound acces in perf userspace
- make perf tools compile with UCLIBC again
- a fix for the userspace unwinder utility"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Use this_cpu_ptr() when stopping AUX events
perf evsel: Do not access outside hw cache name arrays
tools lib: Reinstate strlcpy() header guard with __UCLIBC__
perf unwind: Use addr_location::addr instead of ip for entries
Pull x86 fix from Thomas Gleixner:
"A single bugfix to prevent irq remapping when the ioapic is disabled"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Do not init irq remapping if ioapic is disabled
Pull irq fixes from Thomas Gleixner:
"This lot provides:
- plug a hotplug race in the new affinity infrastructure
- a fix for the trigger type of chained interrupts
- plug a potential memory leak in the core code
- a few fixes for ARM and MIPS GICs"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mips-gic: Implement activate op for device domain
irqchip/mips-gic: Cleanup chip and handler setup
genirq/affinity: Use get/put_online_cpus around cpumask operations
genirq: Fix potential memleak when failing to get irq pm
irqchip/gicv3-its: Disable the ITS before initializing it
irqchip/gicv3: Remove disabling redistributor and group1 non-secure interrupts
irqchip/gic: Allow self-SGIs for SMP on UP configurations
genirq: Correctly configure the trigger on chained interrupts
Pull timer fixes from Thomas Gleixner:
"A few updates for timers & co:
- prevent a livelock in the timekeeping code when debugging is
enabled
- prevent out of bounds access in the timekeeping debug code
- various fixes in clocksource drivers
- a new maintainers entry"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/sun4i: Clear interrupts after stopping timer in probe function
drivers/clocksource/pistachio: Fix memory corruption in init
clocksource/drivers/timer-atmel-pit: Enable mck clock
clocksource/drivers/pxa: Fix include files for compilation
MAINTAINERS: Add ARM ARCHITECTED TIMER entry
timekeeping: Cap array access in timekeeping_debug
timekeeping: Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING
We already have need_inval in ib_mr, lets use
that instead.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Pull KVM fixes from Paolo Bonzini:
"ARM:
- fixes for ITS init issues, error handling, IRQ leakage, race
conditions
- an erratum workaround for timers
- some removal of misleading use of errors and comments
- a fix for GICv3 on 32-bit guests
MIPS:
- fix for where the guest could wrongly map the first page of
physical memory
x86:
- nested virtualization fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
MIPS: KVM: Check for pfn noslot case
kvm: nVMX: fix nested tsc scaling
KVM: nVMX: postpone VMCS changes on MSR_IA32_APICBASE write
KVM: nVMX: fix msr bitmaps to prevent L2 from accessing L0 x2APIC
arm64: KVM: report configured SRE value to 32-bit world
arm64: KVM: remove misleading comment on pmu status
KVM: arm/arm64: timer: Workaround misconfigured timer interrupt
arm64: Document workaround for Cortex-A72 erratum #853709
KVM: arm/arm64: Change misleading use of is_error_pfn
KVM: arm64: ITS: avoid re-mapping LPIs
KVM: arm64: check for ITS device on MSI injection
KVM: arm64: ITS: move ITS registration into first VCPU run
KVM: arm64: vgic-its: Make updates to propbaser/pendbaser atomic
KVM: arm64: vgic-its: Plug race in vgic_put_irq
KVM: arm64: vgic-its: Handle errors from vgic_add_lpi
KVM: arm64: ITS: return 1 on successful MSI injection
Pull ARM64 fix from Catalin Marinas:
"ARM64 fix to avoid potential TLB conflict when CONFIG_RANDOMIZE_BASE
is enabled"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: avoid TLB conflict with CONFIG_RANDOMIZE_BASE
Pull rdma fixes from Doug Ledford:
"Round one of 4.8 rc fixes.
This should be the bulk of the -rc fixes for 4.8. I only have a few
things that are still outstanding (two ipoib bugs for which the
solution is not yet fully known, and a few queued items that came in
after my last push and I didn't want to delay this pull request for
late comers again).
Even though the patch count is kind of high, everything is minor fixes
so the overall churn is pretty low.
Summary:
- minor fixes to cxgb4
- minor fixes to mlx4
- one minor fix each to core, rxe, isert, srpt, mlx5, ocrdma, and usnic
- six or so fixes to i40iw fixes
- the rest are hfi1 fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (34 commits)
i40iw: Send last streaming mode message for loopback connections
IB/srpt: Update sport->port_guid with each port refresh
RDMA/ocrdma: Fix the max_sge reported from FW
i40iw: Avoid writing to freed memory
i40iw: Fix double free of allocated_buffer
IB/mlx5: Remove superfluous include of io-mapping.h
i40iw: Do not set self-referencing pointer to NULL after kfree
i40iw: Add missing NULL check for MPA private data
iw_cxgb4: Fix cxgb4 arm CQ logic w/IB_CQ_REPORT_MISSED_EVENTS
i40iw: Add missing check for interface already open
i40iw: Protect req_resource_num update
i40iw: Change mem_resources pointer to a u8
IB/core: Use memdup_user() rather than duplicating its implementation
IB/qib: Use memdup_user() rather than duplicating its implementation
iw_cxgb4: use the MPA initiator's IRD if < our ORD
iw_cxgb4: limit IRD/ORD advertised to ULP by device max.
IB/hfi1: Fix mm_struct use after free
IB/rdmvat: Fix double vfree() in rvt_create_qp() error path
IB/hfi1: Improve J_KEY generation
IB/hfi1: Return invalid field for non-QSFP CableInfo queries
...
Pull sound fixes from Takashi Iwai:
"Here are a bunch of fixes as you can see in diffstat.
One core change in ASoC is about the unexpected unbinding error, and
another about debugfs cleanup.
The rest are wide-spread driver-specific fixes: a series of LINE6 USB
fixes, a HD-audio quirk, and various ASoC fixes including OMAP boot
fixes and Intel SKL fixes"
* tag 'sound-4.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (22 commits)
ALSA: hda/realtek - fix headset mic detection for MSI MS-B120
ASoC: omap-mcpdm: Fix irq resource handling
ASoC: max98371: Add terminate entry for i2c_device_id tables
ALSA: line6: Fix POD sysfs attributes segfault
ALSA: line6: Give up on the lock while URBs are released.
ALSA: line6: Remove double line6_pcm_release() after failed acquire.
ASoC: omap-abe-twl6040: Correct dmic-codec device registration
ASoC: core: Clean up DAPM before the card debugfs
ASoC: omap-mcpdm: Drop pdmclk clock handling
ASoC: atmel_ssc_dai: Don't unconditionally reset SSC on stream startup
ASoC: compress: Fix leak of a widget list in soc_compr_open_fe
ASoC: Intel: Skylake: Fix error return code in skl_probe()
ASoC: wm2000: Fix return of uninitialised varible
ASoC: Fix leak of rtd in soc_bind_dai_link
ASoC: da7213: Default to 64 BCLKs per WCLK to support all formats
ASoC: nau8825: fix static check error about semaphone control
ASoC: nau8825: fix bug in playback when suspend
ASoC: samsung: Fix clock handling in S3C24XX_UDA134X card
ASoC: simple-card-utils: add missing MODULE_xxx()
ASoC: Intel: Skylake: Check list empty while getting module info
...
On 32-bit systems, mask is only an array of 3 longs, not 4, so don't try
to write to mask[3].
Also include build-time checks in case the size of the bitmask changes.
Fixes: 3c36a2aded ("sfc: display vadaptor statistics for all interfaces")
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hedberg says:
====================
pull request: bluetooth 2016-08-25
Here are a couple of important Bluetooth fixes for the 4.8 kernel:
- Memory leak fix for HCI requests
- Fix sk_filter handling with L2CAP
- Fix sock_recvmsg behavior when MSG_TRUNC is not set
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull btrfs fixes from Chris Mason:
"We've queued up a few different fixes in here. These range from
enospc corners to fsync and quota fixes, and a few targeted at error
handling for corrupt metadata/fuzzing"
* 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix lockdep warning on deadlock against an inode's log mutex
Btrfs: detect corruption when non-root leaf has zero item
Btrfs: check btree node's nritems
btrfs: don't create or leak aliased root while cleaning up orphans
Btrfs: fix em leak in find_first_block_group
btrfs: do not background blkdev_put()
Btrfs: clarify do_chunk_alloc()'s return value
btrfs: fix fsfreeze hang caused by delayed iputs deal
btrfs: update btrfs_space_info's bytes_may_use timely
btrfs: divide btrfs_update_reserved_bytes() into two functions
btrfs: use correct offset for reloc_inode in prealloc_file_extent_cluster()
btrfs: qgroup: Fix qgroup incorrectness caused by log replay
btrfs: relocation: Fix leaking qgroups numbers on data extents
btrfs: qgroup: Refactor btrfs_qgroup_insert_dirty_extent()
btrfs: waiting on qgroup rescan should not always be interruptible
btrfs: properly track when rescan worker is running
btrfs: flush_space: treat return value of do_chunk_alloc properly
Btrfs: add ASSERT for block group's memory leak
btrfs: backref: Fix soft lockup in __merge_refs function
Btrfs: fix memory leak of reloc_root
Pull dlm fix from David Teigland:
"This fixes a bug introduced by recent debugfs cleanup"
* tag 'dlm-4.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: fix malfunction of dlm_tool caused by debugfs changes
Pull device mapper fixes from Mike Snitzer:
- another stable fix for DM flakey (that tweaks the previous fix that
didn't factor in expected 'drop_writes' behavior for read IO).
- a dm-log bio operation flags fix for the broader block changes that
were merged during the 4.8 merge window.
* tag 'dm-4.8-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm log: fix unitialized bio operation flags
dm flakey: fix reads to be issued if drop_writes configured
Pull IOMMU fixes from Joerg Roedel:
"Fixes from Will Deacon:
- fix a couple of thinkos in the CMDQ error handling and
short-descriptor page table code that have been there since day one
- disable stalling faults, since they may result in hardware deadlock
- fix an accidental BUG() when passing disable_bypass=1 on the
cmdline"
* tag 'iommu-fixes-v4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/arm-smmu: Don't BUG() if we find aborting STEs with disable_bypass
iommu/arm-smmu: Disable stalling faults for all endpoints
iommu/arm-smmu: Fix CMDQ error handling
iommu/io-pgtable-arm-v7s: Fix attributes when splitting blocks
Pull block fixes from Jens Axboe:
"Here's a set of block fixes for the current 4.8-rc release. This
contains:
- a fix for a secure erase regression, from Adrian.
- a fix for an mmc use-after-free bug regression, also from Adrian.
- potential zero pointer deference in bdev freezing, from Andrey.
- a race fix for blk_set_queue_dying() from Bart.
- a set of xen blkfront fixes from Bob Liu.
- three small fixes for bcache, from Eric and Kent.
- a fix for a potential invalid NVMe state transition, from Gabriel.
- blk-mq CPU offline fix, preventing us from issuing and completing a
request on the wrong queue. From me.
- revert two previous floppy changes, since they caused a user
visibile regression. A better fix is in the works.
- ensure that we don't send down bios that have more than 256
elements in them. Fixes a crash with bcache, for example. From
Ming.
- a fix for deferencing an error pointer with cgroup writeback.
Fixes a regression. From Vegard"
* 'for-linus' of git://git.kernel.dk/linux-block:
mmc: fix use-after-free of struct request
Revert "floppy: refactor open() flags handling"
Revert "floppy: fix open(O_ACCMODE) for ioctl-only open"
fs/block_dev: fix potential NULL ptr deref in freeze_bdev()
blk-mq: improve warning for running a queue on the wrong CPU
blk-mq: don't overwrite rq->mq_ctx
block: make sure a big bio is split into at most 256 bvecs
nvme: Fix nvme_get/set_features() with a NULL result pointer
bdev: fix NULL pointer dereference
xen-blkfront: free resources if xlvbd_alloc_gendisk fails
xen-blkfront: introduce blkif_set_queue_limits()
xen-blkfront: fix places not updated after introducing 64KB page granularity
bcache: pr_err: more meaningful error message when nr_stripes is invalid
bcache: RESERVE_PRIO is too small by one when prio_buckets() is a power of two.
bcache: register_bcache(): call blkdev_put() when cache_alloc() fails
block: Fix race triggered by blk_set_queue_dying()
block: Fix secure erase
nvme: Prevent controller state invalid transition
The data offset for a dax region needs to account for a reservation in
the resource range. Otherwise, device-dax is allowing mappings directly
into the memmap or device-info-block area with crash signatures like the
following:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: get_zone_device_page+0x11/0x30
Call Trace:
follow_devmap_pmd+0x298/0x2c0
follow_page_mask+0x275/0x530
__get_user_pages+0xe3/0x750
__gfn_to_pfn_memslot+0x1b2/0x450 [kvm]
tdp_page_fault+0x130/0x280 [kvm]
kvm_mmu_page_fault+0x5f/0xf0 [kvm]
handle_ept_violation+0x94/0x180 [kvm_intel]
vmx_handle_exit+0x1d3/0x1440 [kvm_intel]
kvm_arch_vcpu_ioctl_run+0x81d/0x16a0 [kvm]
kvm_vcpu_ioctl+0x33c/0x620 [kvm]
do_vfs_ioctl+0xa2/0x5d0
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x1a/0xa4
Fixes: ab68f26221 ("/dev/dax, pmem: direct access to persistent memory")
Link: http://lkml.kernel.org/r/147205536732.1606.8994275381938837346.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reported-by: Abhilash Kumar Mulumudi <m.abhilash-kumar@hpe.com>
Reported-by: Toshi Kani <toshi.kani@hpe.com>
Tested-by: Toshi Kani <toshi.kani@hpe.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
seq_read() is a nasty piece of work, not to mention buggy.
It has (I think) an old bug which allows unprivileged userspace to read
beyond the end of m->buf.
I was getting these:
BUG: KASAN: slab-out-of-bounds in seq_read+0xcd2/0x1480 at addr ffff880116889880
Read of size 2713 by task trinity-c2/1329
CPU: 2 PID: 1329 Comm: trinity-c2 Not tainted 4.8.0-rc1+ #96
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
Call Trace:
kasan_object_err+0x1c/0x80
kasan_report_error+0x2cb/0x7e0
kasan_report+0x4e/0x80
check_memory_region+0x13e/0x1a0
kasan_check_read+0x11/0x20
seq_read+0xcd2/0x1480
proc_reg_read+0x10b/0x260
do_loop_readv_writev.part.5+0x140/0x2c0
do_readv_writev+0x589/0x860
vfs_readv+0x7b/0xd0
do_readv+0xd8/0x2c0
SyS_readv+0xb/0x10
do_syscall_64+0x1b3/0x4b0
entry_SYSCALL64_slow_path+0x25/0x25
Object at ffff880116889100, in cache kmalloc-4096 size: 4096
Allocated:
PID = 1329
save_stack_trace+0x26/0x80
save_stack+0x46/0xd0
kasan_kmalloc+0xad/0xe0
__kmalloc+0x1aa/0x4a0
seq_buf_alloc+0x35/0x40
seq_read+0x7d8/0x1480
proc_reg_read+0x10b/0x260
do_loop_readv_writev.part.5+0x140/0x2c0
do_readv_writev+0x589/0x860
vfs_readv+0x7b/0xd0
do_readv+0xd8/0x2c0
SyS_readv+0xb/0x10
do_syscall_64+0x1b3/0x4b0
return_from_SYSCALL_64+0x0/0x6a
Freed:
PID = 0
(stack is not available)
Memory state around the buggy address:
ffff88011688a000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff88011688a080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff88011688a100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
^
ffff88011688a180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88011688a200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
Disabling lock debugging due to kernel taint
This seems to be the same thing that Dave Jones was seeing here:
https://lkml.org/lkml/2016/8/12/334
There are multiple issues here:
1) If we enter the function with a non-empty buffer, there is an attempt
to flush it. But it was not clearing m->from after doing so, which
means that if we try to do this flush twice in a row without any call
to traverse() in between, we are going to be reading from the wrong
place -- the splat above, fixed by this patch.
2) If there's a short write to userspace because of page faults, the
buffer may already contain multiple lines (i.e. pos has advanced by
more than 1), but we don't save the progress that was made so the
next call will output what we've already returned previously. Since
that is a much less serious issue (and I have a headache after
staring at seq_read() for the past 8 hours), I'll leave that for now.
Link: http://lkml.kernel.org/r/1471447270-32093-1-git-send-email-vegard.nossum@oracle.com
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Reported-by: Dave Jones <davej@codemonkey.org.uk>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A bugfix in v4.8-rc2 introduced a harmless warning when
CONFIG_MEMCG_SWAP is disabled but CONFIG_MEMCG is enabled:
mm/memcontrol.c:4085:27: error: 'mem_cgroup_id_get_online' defined but not used [-Werror=unused-function]
static struct mem_cgroup *mem_cgroup_id_get_online(struct mem_cgroup *memcg)
This moves the function inside of the #ifdef block that hides the
calling function, to avoid the warning.
Fixes: 1f47b61fb4 ("mm: memcontrol: fix swap counter leak on swapout from offline cgroup")
Link: http://lkml.kernel.org/r/20160824113733.2776701-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit bbeddf52ad ("printk: move braille console support into separate
braille.[ch] files") moved the parsing of braille-related options into
_braille_console_setup(), changing the type of variable str from char*
to char**. In this commit, memcmp(str, "brl,", 4) was correctly updated
to memcmp(*str, "brl,", 4) but not memcmp(str, "brl=", 4).
Update the code to make "brl=" option work again and replace memcmp()
with strncmp() to make the compiler able to detect such an issue.
Fixes: bbeddf52ad ("printk: move braille console support into separate braille.[ch] files")
Link: http://lkml.kernel.org/r/20160823165700.28952-1-nicolas.iooss_linux@m4x.org
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While adding proper userfaultfd_wp support with bits in pagetable and
swap entry to avoid false positives WP userfaults through swap/fork/
KSM/etc, I've been adding a framework that mostly mirrors soft dirty.
So I noticed in one place I had to add uffd_wp support to the pagetables
that wasn't covered by soft_dirty and I think it should have.
Example: in the THP migration code migrate_misplaced_transhuge_page()
pmd_mkdirty is called unconditionally after mk_huge_pmd.
entry = mk_huge_pmd(new_page, vma->vm_page_prot);
entry = maybe_pmd_mkwrite(pmd_mkdirty(entry), vma);
That sets soft dirty too (it's a false positive for soft dirty, the soft
dirty bit could be more finegrained and transfer the bit like uffd_wp
will do.. pmd/pte_uffd_wp() enforces the invariant that when it's set
pmd/pte_write is not set).
However in the THP split there's no unconditional pmd_mkdirty after
mk_huge_pmd and pte_swp_mksoft_dirty isn't called after the migration
entry is created. The code sets the dirty bit in the struct page
instead of setting it in the pagetable (which is fully equivalent as far
as the real dirty bit is concerned, as the whole point of pagetable bits
is to be eventually flushed out of to the page, but that is not
equivalent for the soft-dirty bit that gets lost in translation).
This was found by code review only and totally untested as I'm working
to actually replace soft dirty and I don't have time to test potential
soft dirty bugfixes as well :).
Transfer the soft_dirty from pmd to pte during THP splits.
This fix avoids losing the soft_dirty bit and avoids userland memory
corruption in the checkpoint.
Fixes: eef1b3ba05 ("thp: implement split_huge_pmd()")
Link: http://lkml.kernel.org/r/1471610515-30229-2-git-send-email-aarcange@redhat.com
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Pavel Emelyanov <xemul@virtuozzo.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have scripts which write to certain fields on 3.18 kernels but this
seems to be failing on 4.4 kernels. An entry which we write to here is
xfrm_aevent_rseqth which is u32.
echo 4294967295 > /proc/sys/net/core/xfrm_aevent_rseqth
Commit 230633d109 ("kernel/sysctl.c: detect overflows when converting
to int") prevented writing to sysctl entries when integer overflow
occurs. However, this does not apply to unsigned integers.
Heinrich suggested that we introduce a new option to handle 64 bit
limits and set min as 0 and max as UINT_MAX. This might not work as it
leads to issues similar to __do_proc_doulongvec_minmax. Alternatively,
we would need to change the datatype of the entry to 64 bit.
static int __do_proc_doulongvec_minmax(void *data, struct ctl_table
{
i = (unsigned long *) data; //This cast is causing to read beyond the size of data (u32)
vleft = table->maxlen / sizeof(unsigned long); //vleft is 0 because maxlen is sizeof(u32) which is lesser than sizeof(unsigned long) on x86_64.
Introduce a new proc handler proc_douintvec. Individual proc entries
will need to be updated to use the new handler.
[akpm@linux-foundation.org: coding-style fixes]
Fixes: 230633d109 ("kernel/sysctl.c:detect overflows when converting to int")
Link: http://lkml.kernel.org/r/1471479806-5252-1-git-send-email-subashab@codeaurora.org
Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When team is in bridge and LACP is utilized, LACPDU packets are pushed
to userspace using raw socket and there they are processed. However,
since 8626c56c82, LACPDU skbs are dropped by bridge rx_handler so
they never reach packet handlers in rx path. Fix this by explicity treat
LACPDUs to be pushed to exact delivery in team rx_handler.
Reported-by: Ido Schimmel <idosch@mellanox.com>
Fixes: 8626c56c82 ("bridge: fix potential use-after-free when hook returns QUEUE or STOLEN verdict")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ppe_cb->ppe_common_cb is being dereferenced before a null check is
being made on it. If ppe_cb->ppe_common_cb is null then we end up
with a null pointer dereference when assigning dsaf_dev. Fix this
by moving the initialisation of dsaf_dev once we know
ppe_cb->ppe_common_cb is OK to dereference.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the current kernel, `dlm_tool lockdebug` fails as below:
"dlm_tool lockdebug ED0BD86DCE724393918A1AE8FDBF1EE3
can't open /sys/kernel/debug/dlm/ED0BD86DCE724393918A1AE8FDBF1EE3:
Operation not permitted"
This is because table_open() depends on file->f_op to tell which
seq_file ops should be passed down. But, the original file ops in
file->f_op is replaced by "debugfs_full_proxy_file_operations" with
commit 49d200deaa ("debugfs: prevent access to removed files'
private data").
Currently, I can think up 2 solutions: 1st, replace
debugfs_create_file() with debugfs_create_file_unsafe();
2nd, make different table_open#() accordingly. The 1st one
is neat, but I don't thoroughly understand its risk. Maybe
someone has a better one.
Signed-off-by: Eric Ren <zren@suse.com>
Signed-off-by: David Teigland <teigland@redhat.com>
I've been helping reviewing and testing Exynos SoC support patches
for the last couple of years. But it would be easier for me if I'm
cc'ed for patches, so I'm adding myself as reviewer for this entry.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Kukjin Kim <kgene@kernel.org>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Clear the current reset status prior to rebooting the platform. This
adds the bit missing from 04fef228fb ("[ARM] pxa: introduce
reset_status and clear_reset_status for driver's usage").
Fixes: 04fef228fb ("[ARM] pxa: introduce reset_status and clear_reset_status for driver's usage")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
In all other places in this file where 'find_first_bit' is called,
port_num is defined as a 'u8' and no casting is done.
Do the same here in order to be more consistent.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Device notifications are not received after the first interface is
closed; since there is an unregister for notifications on every
interface close. Correct this by unregistering for device
notifications only when the last interface is closed. Also, make
all operations on the i40iw_notifiers_registered atomic as it
can be read/modified concurrently.
Fixes: 8e06af711b ("i40iw: add main, hdr, status")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Update iwqp->hw_iwarp_state to reflect the new state of the CQP
modify QP operation. This avoids reissuing a CQP operation to
modify a QP to a state that it is already in.
Fixes: 4e9042e647 ("i40iw: add hw and utils files")
Reported-by: Stefan Assmann <sassmann@redhat.com>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The bootloader (U-boot) sometimes uses this timer for various delays.
It uses it as a ongoing counter, and does comparisons on the current
counter value. The timer counter is never stopped.
In some cases when the user interacts with the bootloader, or lets
it idle for some time before loading Linux, the timer may expire,
and an interrupt will be pending. This results in an unexpected
interrupt when the timer interrupt is enabled by the kernel, at
which point the event_handler isn't set yet. This results in a NULL
pointer dereference exception, panic, and no way to reboot.
Clear any pending interrupts after we stop the timer in the probe
function to avoid this.
Cc: stable@vger.kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Driver init code incorrectly uses the block base address and as a result
clears clocksource structure's fields instead of the hardware registers.
Commit 09a9982016 ("timekeeping: Lift clocksource cacheline
restriction") has changed the offsets within pistachio_clocksource
structure and what has previously gone unnoticed now leads to a kernel
panic during boot.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The skb_reserve() call only reserved headroom for the mac header, but
not the elp packet header itself.
Fixing this by using skb_put()'ing towards the skb tail instead of
skb_push()'ing towards the skb head.
Fixes: d6f94d91f7 ("batman-adv: ELP - adding basic infrastructure")
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
batadv_find_router dereferences last_bonding_candidate from
orig_node without making sure that it has a valid reference. This reference
has to be retrieved by increasing the reference counter while holding
neigh_list_lock. The lock is required to avoid that
batadv_last_bonding_replace removes the current last_bonding_candidate,
reduces the reference counter and maybe destroys the object in this
process.
Fixes: f3b3d90189 ("batman-adv: add bonding again")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <mareklindner@neomailbox.ch>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
While converting PCIe node on kirkwood by using label, the following
commit eb13cf8345 ("ARM: dts: kirkwood: Fixup pcie DT warnings")
introduced a regression on the OpenRD boards: the PCIe didn't work
anymore. As reported by Aaro Koskinen, the display/framebuffer was
lost. This commit adds the forgotten label.
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Fixes: eb13cf8345 ("ARM: dts: kirkwood: Fixup pcie DT warnings")
Cc: stable@vger.kernel.org
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
The CCN PMU driver leaves the counting logic always enabled, and thus
events are enabled while groups are manipulated. As each event is
stopped and read individually, this leads to arbitrary skew across event
groups, which can be seen if counting several identical events.
To avoid this, implement pmu_{enable,disable} callbacks to stop and
start all counters atomically around event manipulation. As the counters
are now stopped, we cannot poll the cycle counter to wait for events to
drain from the bus. However, as the counters are stopped and the events
will not be read regardless, we can simply allow the bus to drain
naturally.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
The CCN PMU driver has a single hrtimer, used to simulate a periodic
interrupt on systems where the overflow interrupt is not possible to
use. The hrtimer is started when any event is started, and cancelled when
any event is stopped. Thus, stopping a single event is sufficient to
disable to hrtimer, and overflows (of other events) may be lost.
To avoid this, this patch reworks the hrtimer start/cancel to only occur
when the first event is added to a PMU, and the last event removed,
making use of the existing bitmap counting active events.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Currently the IRQ core is permitted to make the CCN PMU IRQ handler
threaded, and will allow userspace to change the CPU affinity of the
interrupt behind our back. Both of these could violate our
synchronisation requirements with the core perf code, which relies upon
strict CPU affinity and disabling of interrupts to guarantee mutual
exclusion in some cases.
As with the CPU PMU drivers, we should request the interrupt with
IRQF_NOBALANCING and IRQF_NO_THREAD, to avoid these issues.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
xfs_wait_buftarg() waits for all pending I/O, drains the ioend
completion workqueue and walks the LRU until all buffers in the cache
have been released. This is traditionally an unmount operation` but the
mechanism is also reused during filesystem freeze.
xfs_wait_buftarg() invokes drain_workqueue() as part of the quiesce,
which is intended more for a shutdown sequence in that it indicates to
the queue that new operations are not expected once the drain has begun.
New work jobs after this point result in a WARN_ON_ONCE() and are
otherwise dropped.
With filesystem freeze, however, read operations are allowed and can
proceed during or after the workqueue drain. If such a read occurs
during the drain sequence, the workqueue infrastructure complains about
the queued ioend completion work item and drops it on the floor. As a
result, the buffer remains on the LRU and the freeze never completes.
Despite the fact that the overall buffer cache cleanup is not necessary
during freeze, fix up this operation such that it is safe to invoke
during non-unmount quiesce operations. Replace the drain_workqueue()
call with flush_workqueue(), which runs a similar serialization on
pending workqueue jobs without causing new jobs to be dropped. This is
safe for unmount as unmount independently locks out new operations by
the time xfs_wait_buftarg() is invoked.
cc: <stable@vger.kernel.org>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
From inspection, the superblock sb_inprogress check is done in the
verifier and triggered only for the primary superblock via a
"bp->b_bn == XFS_SB_DADDR" check.
Unfortunately, the primary superblock is an uncached buffer, and
hence it is configured by xfs_buf_read_uncached() with:
bp->b_bn = XFS_BUF_DADDR_NULL; /* always null for uncached buffers */
And so this check never triggers. Fix it.
cc: <stable@vger.kernel.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
If the initial LOOKUP_LE in the simple query range fails to find
anything, we should attempt to increment the btree cursor to see
if there actually /are/ records for what we're trying to find.
Without this patch, a bnobt range query of (0, $agsize) returns
no results because the leftmost record never has a startblock
of zero.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We only need the record's high key for the first record that we look
at; for all records, we /definitely/ need the regular record key.
Therefore, fix how the simple range query function gets its keys.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When we're logging the last non-spare field in the AGF, we don't
need to log the spare fields, so plumb in a new AGF logging flag
to help us avoid that.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Since the kernel doesn't currently support the realtime rmapbt,
don't allow such filesystems to be mounted. Support will appear
in a future release.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
If the caller passes in a cursor to a zero-height btree (which is
impossible), we never set block to anything but NULL, which causes the
later dereference of it to crash. Instead, just return -EFSCORRUPTED.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The ARM GIC only supports interrupts with either level-high or
rising-edge types for SPIs. The interrupt type for the Palmas PMIC used
for Tegra114 boards is specified as level-low which is invalid for the
GIC. This has gone undetected because until recently, failures to set
the interrupt type when the interrupts are mapped via firmware (such as
device-tree) have not been reported. Since commits 4b357daed6
("genirq: Look-up trigger type if not specified by caller") and
1e2a7d7849 ("irqdomain: Don't set type when mapping an IRQ"), failure
to set the interrupt type will cause the requesting of the interrupt to
fail and exposing incorrectly configured interrupts.
Please note that although the interrupt type was never being set for the
Palmas PMIC, it was still working fine, because the default type setting
for the interrupt, 'level-high', happen to match the correct type for
the interrupt.
Finally, it should be noted that the Palmas interrupt from the PMIC is
actually 'level-low', however, this interrupt signal is inverted by the
Tegra PMC and so the GIC actually sees a 'level-high' interrupt which is
what should be specified in the device-tree interrupt specifier.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Fix for v4.8-rc1:
1. Select proper eMMC HighSpeed mode on Odroid XU. DTS was mixing
"samsung,exynos5250-dw-mshc" compatible (with HS200 as fastest mode)
with a property "mmc-hs400-1_8v" thus leading to failures during
probe.
2. Update Krzysztof Kozlowski's email address in maintainers.
* tag 'samsung-fixes-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
MAINTAINERS: Switch to kernel.org account for Krzysztof Kozlowski
ARM: dts: exynos: Properly select eMMC HighSpeed mode on Odroid XU
Signed-off-by: Olof Johansson <olof@lixom.net>
The i.MX fixes for 4.8:
- Fix typo in imx6sx-sabreauto board wakeup property
- Fix i.MX6UL suspend-to-standby support by adding the
BM_CLPCR_BYP_MMDC_CH0_LPM_HS handling
- Fix a i.MX6UL regression on suspend support, which is caused by
commit 850bea2335 ("arm: Remove unnecessary of_platform_populate
with default match table")
* tag 'imx-fixes-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx6ul: populates platform device at .init_machine
ARM: imx6: add missing BM_CLPCR_BYP_MMDC_CH0_LPM_HS setting for imx6ul
ARM: dts: imx6sx-sabreauto: Fix misspelled property
Signed-off-by: Olof Johansson <olof@lixom.net>
Add T: entry for a new git tree, which I expect UniPhier SoC
updates will be pulled from.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Fixes for omaps for v4.8-rc cycle, mostly a series of four fixes for
am335x RTC zero offset for clkctrl register. Also few other fixes:
- Add missing sysc information for DSI as at least n950 needs it for
the working display
- Fix old elm-id properties that cause nand boot to not work
- Fix overo gpmc nand cs0 range
- FIx overo gpmc nand on boards with ethernet
- Fix logicpd torpedo nand ready pin nand interrupt configuration
* tag 'omap-for-v4.8/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: logicpd-somlv: Fix NAND device nodes
ARM: dts: logicpd-torpedo-som: Provide NAND ready pin
ARM: dts: overo: fix gpmc nand on boards with ethernet
ARM: dts: overo: fix gpmc nand cs0 range
ARM: dts: am335x: Update elm phandle binding
ARM: OMAP4+: CM: Remove redundant checks for clkctrl_offs of zero
ARM: OMAP4+: Have _omap4_wait_target_* check for valid clkctrl_offs
ARM: OMAP2+: AM33XX: Add HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET flag to rtc hwmod
ARM: OMAP4+: hwmod: Add hwmod flag for HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET
ARM: OMAP3: hwmod data: Add sysc information for DSI
Signed-off-by: Olof Johansson <olof@lixom.net>
When cp_rx_poll does not get enough packet, it will check the rx
interrupt status again. If so, it will jumpt to rx_status_loop again.
But the goto jump resets the rx variable as zero too.
As a result, it causes one possible deadloop. Assume this case,
rx_status_loop only gets the packet count which is less than budget,
and (cpr16(IntrStatus) & cp_rx_intr_mask) condition is always true.
It causes the deadloop happens and system is blocked.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
SCPI/Vexpress fixes for v4.8-rc
Couple of minor fixes to add missing of_node_put after calling
of_parse_phandle in SCPI and vexpress-config bus drivers(Peter Chen)
* tag 'vexpress-fixes-4.8-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scpi: add missing of_node_put after calling of_parse_phandle
bus: vexpress-config: add missing of_node_put after calling of_parse_phandle
Signed-off-by: Olof Johansson <olof@lixom.net>
This change makes a common flow for Client instance open during init
and reset path. The Client subtask can handle both the cases instead of
making a separate notify_client_of_open call.
Also it may fix a bug during reset where the service task was leaking
some memory and causing issues.
Change-Id: I7232a32fd52b82e863abb54266fa83122f80a0cd
Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
OMAP-GPMC: fixes for v4.8-rc1
Allow other children of GPMC to probe even if any child fails. This fixes
problem on Overo boards where networking device child doesn't probe due
to broken NAND child.
* tag 'gpmc-omap-v4.8-rc1' of https://github.com/rogerq/linux:
memory: omap-gpmc: allow probe of child nodes to fail
Signed-off-by: Olof Johansson <olof@lixom.net>
This reverts:
commit 33c133cc75 ("phy: IRQ cannot be shared")
On hardware with multiple PHY devices hooked up to the same IRQ line, allow
them to share it.
Sergei Shtylyov says:
"I'm not sure now what was the reason I concluded that the IRQ sharing
was impossible... most probably I thought that the kernel IRQ handling
code exited the loop over the IRQ actions once IRQ_HANDLED was returned
-- which is obviously not so in reality..."
Signed-off-by: Xander Huff <xander.huff@ni.com>
Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mvebu fixes for 4.8 (part 1)
Fix lan numbering for the Armada 388 clearfog board
* tag 'mvebu-fixes-4.8-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: armada-388-clearfog: number LAN ports properly
Signed-off-by: Olof Johansson <olof@lixom.net>
We kept shadow copies of which interrupt sources we have enabled and
disabled, but due to an order bug in how intrl2_mask_clear was defined,
we could run into the following scenario:
CPU0 CPU1
intrl2_1_mask_clear(..)
sets INTRL2_CPU_MASK_CLEAR
bcm_sf2_switch_1_isr
read INTRL2_CPU_STATUS and masks with stale
irq1_mask value
updates irq1_mask value
Which would make us loop again and again trying to process and interrupt
we are not clearing since our copy of whether it was enabled before
still indicates it was not. Fix this by updating the shadow copy first,
and then unasking at the HW level.
Fixes: 246d7f773c ("net: dsa: add Broadcom SF2 switch driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix to return a negative error code in enable_mcast() error handling
case, and release udp socket when necessary.
Fixes: d0f91938be ("tipc: add ip/udp media type")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan writes:
USB-serial fixes for v4.8-rc4
Here are a couple of fixes for non-atomic allocations in write paths,
and some new option device ids.
Signed-off-by: Johan Hovold <johan@kernel.org>
We call mmc_req_is_special() after having processed a request, but
it could be freed after that. Check that ahead of time, and use
the cached value.
Reported-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Fixes: c2df40dfb8 ("drivers: use req op accessor")
Signed-off-by: Jens Axboe <axboe@fb.com>
i915 fixes queue.
* tag 'drm-intel-fixes-2016-08-25' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Fix botched merge that downgrades CSR versions.
drm/i915/skl: Ensure pipes with changed wms get added to the state
drm/i915/gen9: Only copy WM results for changed pipes to skl_hw
drm/i915/skl: Add support for the SAGV, fix underrun hangs
drm/i915/gen6+: Interpret mailbox error flags
drm/i915: Reattach comment, complete type specification
drm/i915: Unconditionally flush any chipset buffers before execbuf
drm/i915/gen9: Drop invalid WARN() during data rate calculation
drm/i915/gen9: Initialize intel_state->active_crtcs during WM sanitization (v2)
For reasons that entirely elude me fb.h exposes all the structures,
even when it is not enabled. Except for special stuff like fb_defio.
Which means all the drivers which haven't yet switched over to the
defio support in the helpers and still roll their own, will fail
to compile when fbdev emulation is disabled. Protect just those
bits, as a gnarly reminder that conversion to the core defio helpers
would be good.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1470847958-28465-6-git-send-email-daniel.vetter@ffwll.ch
Signed-off-by: Dave Airlie <airlied@redhat.com>
Similar to bt_sock_recvmsg MSG_TRUNC shall be checked using the original
flags not msg_flags.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Commit b5f34f9420 attempt to introduce
proper handling for MSG_TRUNC but recv and variants should still work
as read if no flag is passed, but because the code may set MSG_TRUNC to
msg->msg_flags that shall not be used as it may cause it to be behave as
if MSG_TRUNC is always, so instead of using it this changes the code to
use the flags parameter which shall contain the original flags.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
ASoC: Fixes for v4.8
A clutch of fixes for v4.8. These are mainly driver specific, the most
notable ones being those for OMAP which fix a series of issues that
broke boot on some platforms there when deferred probe kicked in.
There's also one core fix for an issue when unbinding a card which for
some reason had managed to not manifest until recently.
As the meaning of these variables and pointers seems to change more
frequently, let's directly access our save area, instead of going via
current->thread.
Right now, this is broken for set/get_fpu. They simply overwrite the
host registers, as the pointers to the current save area were turned
into the static host save area.
Cc: stable@vger.kernel.org # 4.7
Fixes: 3f6813b9a5 ("s390/fpu: allocate 'struct fpu' with the task_struct")
Reported-by: Hao QingFeng <haoqf@linux.vnet.ibm.com>
Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Send a zero length last streaming mode message for loopback
connections to synchronize between accepting QP and connecting QP.
This avoids data transfer to start on the accepting QP before
the connecting QP is in RTS. Also remove function i40iw_loopback_nop()
as it is no longer used.
Fixes: f27b4746f3 ("i40iw: add connection management code")
Signed-off-by: Tatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Calling freeze_bdev() twice on the same block device without mounted
filesystem get_super() will return NULL, which will lead to NULL-ptr
dereference later in drop_super().
Check get_super() result to fix that.
Note, that this is a purely theoretical issue. We have only 3
freeze_bdev() callers. 2 of them are in filesystem code and used on a
device with mounted fs. The third one in lock_fs() has protection in
upper-layer code against freezing block device the second time without
thawing it first.
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Felipe writes:
usb: fixes for v4.8-rc3
Few fixes on dwc3 again, the most important being a
fix for pm_runtime to make it work with current
intel platforms.
Other than that, there's a signedness bug fix in fsl
udc and some other minor fixes.
commit bcf4934288 ("netfilter: ebtables: Fix extension lookup with
identical name") added a second lookup in case the extension that was
found during the first lookup matched another extension with the same
name, but didn't release the reference on the incorrect module.
Fixes: bcf4934288 ("netfilter: ebtables: Fix extension lookup with identical name")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
"meta pkttype set" is only supported on prerouting chain with bridge
family and ingress chain with netdev family.
But the validate check is incomplete, and the user can add the nft
rules on input chain with bridge family, for example:
# nft add table bridge filter
# nft add chain bridge filter input {type filter hook input \
priority 0 \;}
# nft add chain bridge filter test
# nft add rule bridge filter test meta pkttype set unicast
# nft add rule bridge filter input jump test
This patch fixes the problem.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
KASAN reported this bug:
BUG: KASAN: use-after-free in icmp_packet+0x25/0x50 [nf_conntrack_ipv4] at
addr ffff880002db08c8
Read of size 4 by task lt-nf-queue/19041
Call Trace:
<IRQ> [<ffffffff815eeebb>] dump_stack+0x63/0x88
[<ffffffff813386f8>] kasan_report_error+0x528/0x560
[<ffffffff81338cc8>] kasan_report+0x58/0x60
[<ffffffffa07393f5>] ? icmp_packet+0x25/0x50 [nf_conntrack_ipv4]
[<ffffffff81337551>] __asan_load4+0x61/0x80
[<ffffffffa07393f5>] icmp_packet+0x25/0x50 [nf_conntrack_ipv4]
[<ffffffffa06ecaa0>] nf_conntrack_in+0x550/0x980 [nf_conntrack]
[<ffffffffa06ec550>] ? __nf_conntrack_confirm+0xb10/0xb10 [nf_conntrack]
[ ... ]
The main reason is that we missed to unlink the timeout objects in the
unconfirmed ct lists, so we will access the timeout objects that have
already been freed.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We forget to call nf_ct_l4proto_put when replacing the existing
timeout policy. Acctually, there's no need to get ct l4proto
before doing replace, so we can move it to a later position.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
cttimeout and acct objects are deleted from the list while traversing
it, so use list_for_each_entry is unsafe here.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Commit 44f714dae5 ("Btrfs: improve performance on fsync against new
inode after rename/unlink"), which landed in 4.8-rc2, introduced a
possibility for a deadlock due to double locking of an inode's log mutex
by the same task, which lockdep reports with:
[23045.433975] =============================================
[23045.434748] [ INFO: possible recursive locking detected ]
[23045.435426] 4.7.0-rc6-btrfs-next-34+ #1 Not tainted
[23045.436044] ---------------------------------------------
[23045.436044] xfs_io/3688 is trying to acquire lock:
[23045.436044] (&ei->log_mutex){+.+...}, at: [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044]
but task is already holding lock:
[23045.436044] (&ei->log_mutex){+.+...}, at: [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044]
other info that might help us debug this:
[23045.436044] Possible unsafe locking scenario:
[23045.436044] CPU0
[23045.436044] ----
[23045.436044] lock(&ei->log_mutex);
[23045.436044] lock(&ei->log_mutex);
[23045.436044]
*** DEADLOCK ***
[23045.436044] May be due to missing lock nesting notation
[23045.436044] 3 locks held by xfs_io/3688:
[23045.436044] #0: (&sb->s_type->i_mutex_key#15){+.+...}, at: [<ffffffffa035f2ae>] btrfs_sync_file+0x14e/0x425 [btrfs]
[23045.436044] #1: (sb_internal#2){.+.+.+}, at: [<ffffffff8118446b>] __sb_start_write+0x5f/0xb0
[23045.436044] #2: (&ei->log_mutex){+.+...}, at: [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044]
stack backtrace:
[23045.436044] CPU: 4 PID: 3688 Comm: xfs_io Not tainted 4.7.0-rc6-btrfs-next-34+ #1
[23045.436044] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.1-0-gb3ef39f-prebuilt.qemu-project.org 04/01/2014
[23045.436044] 0000000000000000 ffff88022f5f7860 ffffffff8127074d ffffffff82a54b70
[23045.436044] ffffffff82a54b70 ffff88022f5f7920 ffffffff81092897 ffff880228015d68
[23045.436044] 0000000000000000 ffffffff82a54b70 ffffffff829c3f00 ffff880228015d68
[23045.436044] Call Trace:
[23045.436044] [<ffffffff8127074d>] dump_stack+0x67/0x90
[23045.436044] [<ffffffff81092897>] __lock_acquire+0xcbb/0xe4e
[23045.436044] [<ffffffff8109155f>] ? mark_lock+0x24/0x201
[23045.436044] [<ffffffff8109179a>] ? mark_held_locks+0x5e/0x74
[23045.436044] [<ffffffff81092de0>] lock_acquire+0x12f/0x1c3
[23045.436044] [<ffffffff81092de0>] ? lock_acquire+0x12f/0x1c3
[23045.436044] [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044] [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044] [<ffffffff814a51a4>] mutex_lock_nested+0x77/0x3a7
[23045.436044] [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044] [<ffffffffa039705e>] ? btrfs_release_delayed_node+0xb/0xd [btrfs]
[23045.436044] [<ffffffffa038552d>] btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044] [<ffffffffa038552d>] ? btrfs_log_inode+0x13a/0xc95 [btrfs]
[23045.436044] [<ffffffff810a0ed1>] ? vprintk_emit+0x453/0x465
[23045.436044] [<ffffffffa0385a61>] btrfs_log_inode+0x66e/0xc95 [btrfs]
[23045.436044] [<ffffffffa03c084d>] log_new_dir_dentries+0x26c/0x359 [btrfs]
[23045.436044] [<ffffffffa03865aa>] btrfs_log_inode_parent+0x4a6/0x628 [btrfs]
[23045.436044] [<ffffffffa0387552>] btrfs_log_dentry_safe+0x5a/0x75 [btrfs]
[23045.436044] [<ffffffffa035f464>] btrfs_sync_file+0x304/0x425 [btrfs]
[23045.436044] [<ffffffff811acaf4>] vfs_fsync_range+0x8c/0x9e
[23045.436044] [<ffffffff811acb22>] vfs_fsync+0x1c/0x1e
[23045.436044] [<ffffffff811acc79>] do_fsync+0x31/0x4a
[23045.436044] [<ffffffff811ace99>] SyS_fsync+0x10/0x14
[23045.436044] [<ffffffff814a88e5>] entry_SYSCALL_64_fastpath+0x18/0xa8
[23045.436044] [<ffffffff8108f039>] ? trace_hardirqs_off_caller+0x3f/0xaa
An example reproducer for this is:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/dir
$ touch /mnt/dir/foo
$ sync
$ mv /mnt/dir/foo /mnt/dir/bar
$ touch /mnt/dir/foo
$ xfs_io -c "fsync" /mnt/dir/bar
This is because while logging the inode of file bar we end up logging its
parent directory (since its inode has an unlink_trans field matching the
current transaction id due to the rename operation), which in turn logs
the inodes for all its new dentries, so that the new inode for the new
file named foo gets logged which in turn triggered another logging attempt
for the inode we are fsync'ing, since that inode had an old name that
corresponds to the name of the new inode.
So fix this by ensuring that when logging the inode for a new dentry that
has a name matching an old name of some other inode, we don't log again
the original inode that we are fsync'ing.
Fixes: 44f714dae5 ("Btrfs: improve performance on fsync against new inode after rename/unlink")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Right now we treat leaf which has zero item as a valid one
because we could have an empty tree, that is, a root that is
also a leaf without any item, however, in the same case but
when the leaf is not a root, we can end up with hitting the
BUG_ON(1) in btrfs_extend_item() called by
setup_inline_extent_backref().
This makes us check the situation as a corruption if leaf is
not its own root.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
When btree node (level = 1) has nritems which equals to zero,
we can end up with panic due to insert_ptr()'s
BUG_ON(slot > nritems);
where slot is 1 and nritems is 0, as copy_for_split() calls
insert_ptr(.., path->slots[1] + 1, ...);
A invalid value results in the whole mess, this adds the check
for btree's node nritems so that we stop reading block when
when something is wrong.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
commit 909c3a22da (Btrfs: fix loading of orphan roots leading to BUG_ON)
avoids the BUG_ON but can add an aliased root to the dead_roots list or
leak the root.
Since we've already been loading roots into the radix tree, we should
use it before looking the root up on disk.
Cc: <stable@vger.kernel.org> # 4.5
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
We need to call free_extent_map() on the em we look up.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
At the end of unmount/dev-delete, if the device exclusive open is not
actually closed, then there might be a race with another program in
the userland who is trying to open the device in exclusive mode and
it may fail for eg:
unmount /btrfs; fsck /dev/x
btrfs dev del /dev/x /btrfs; fsck /dev/x
so here background blkdev_put() is not a choice
Signed-off-by: Anand Jain <Anand.Jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Function start_transaction() can return ERR_PTR(1) when flush is
BTRFS_RESERVE_FLUSH_LIMIT, so the call graph is
start_transaction (return ERR_PTR(1))
-> btrfs_block_rsv_add (return 1)
-> reserve_metadata_bytes (return 1)
-> flush_space (return 1)
-> do_chunk_alloc (return 1)
With BTRFS_RESERVE_FLUSH_LIMIT, if flush_space is already on the
flush_state of ALLOC_CHUNK and it successfully allocates a new
chunk, then instead of trying to reserve space again,
reserve_metadata_bytes returns 1 immediately.
Eventually the callers who call start_transaction() usually just
do the IS_ERR() check which ERR_PTR(1) can pass, then it'll get
a panic when dereferencing a pointer which is ERR_PTR(1).
The following patch fixes the above problem.
"btrfs: flush_space: treat return value of do_chunk_alloc properly"
https://patchwork.kernel.org/patch/7778651/
This add comments to clarify do_chunk_alloc()'s return value.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
When running fstests generic/068, sometimes we got below deadlock:
xfs_io D ffff8800331dbb20 0 6697 6693 0x00000080
ffff8800331dbb20 ffff88007acfc140 ffff880034d895c0 ffff8800331dc000
ffff880032d243e8 fffffffeffffffff ffff880032d24400 0000000000000001
ffff8800331dbb38 ffffffff816a9045 ffff880034d895c0 ffff8800331dbba8
Call Trace:
[<ffffffff816a9045>] schedule+0x35/0x80
[<ffffffff816abab2>] rwsem_down_read_failed+0xf2/0x140
[<ffffffff8118f5e1>] ? __filemap_fdatawrite_range+0xd1/0x100
[<ffffffff8134f978>] call_rwsem_down_read_failed+0x18/0x30
[<ffffffffa06631fc>] ? btrfs_alloc_block_rsv+0x2c/0xb0 [btrfs]
[<ffffffff810d32b5>] percpu_down_read+0x35/0x50
[<ffffffff81217dfc>] __sb_start_write+0x2c/0x40
[<ffffffffa067f5d5>] start_transaction+0x2a5/0x4d0 [btrfs]
[<ffffffffa067f857>] btrfs_join_transaction+0x17/0x20 [btrfs]
[<ffffffffa068ba34>] btrfs_evict_inode+0x3c4/0x5d0 [btrfs]
[<ffffffff81230a1a>] evict+0xba/0x1a0
[<ffffffff812316b6>] iput+0x196/0x200
[<ffffffffa06851d0>] btrfs_run_delayed_iputs+0x70/0xc0 [btrfs]
[<ffffffffa067f1d8>] btrfs_commit_transaction+0x928/0xa80 [btrfs]
[<ffffffffa0646df0>] btrfs_freeze+0x30/0x40 [btrfs]
[<ffffffff81218040>] freeze_super+0xf0/0x190
[<ffffffff81229275>] do_vfs_ioctl+0x4a5/0x5c0
[<ffffffff81003176>] ? do_audit_syscall_entry+0x66/0x70
[<ffffffff810038cf>] ? syscall_trace_enter_phase1+0x11f/0x140
[<ffffffff81229409>] SyS_ioctl+0x79/0x90
[<ffffffff81003c12>] do_syscall_64+0x62/0x110
[<ffffffff816acbe1>] entry_SYSCALL64_slow_path+0x25/0x25
>From this warning, freeze_super() already holds SB_FREEZE_FS, but
btrfs_freeze() will call btrfs_commit_transaction() again, if
btrfs_commit_transaction() finds that it has delayed iputs to handle,
it'll start_transaction(), which will try to get SB_FREEZE_FS lock
again, then deadlock occurs.
The root cause is that in btrfs, sync_filesystem(sb) does not make
sure all metadata is updated. There still maybe some codes adding
delayed iputs, see below sample race window:
CPU1 | CPU2
|-> freeze_super() |
|-> sync_filesystem(sb); |
| |-> cleaner_kthread()
| | |-> btrfs_delete_unused_bgs()
| | |-> btrfs_remove_chunk()
| | |-> btrfs_remove_block_group()
| | |-> btrfs_add_delayed_iput()
| |
|-> sb->s_writers.frozen = SB_FREEZE_FS; |
|-> sb_wait_write(sb, SB_FREEZE_FS); |
| acquire SB_FREEZE_FS lock. |
| |
|-> btrfs_freeze() |
|-> btrfs_commit_transaction() |
|-> btrfs_run_delayed_iputs() |
| will handle delayed iputs, |
| that means start_transaction() |
| will be called, which will try |
| to get SB_FREEZE_FS lock. |
To fix this issue, introduce a "int fs_frozen" to record internally whether
fs has been frozen. If fs has been frozen, we can not handle delayed iputs.
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add comment to btrfs_freeze ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
This patch can fix some false ENOSPC errors, below test script can
reproduce one false ENOSPC error:
#!/bin/bash
dd if=/dev/zero of=fs.img bs=$((1024*1024)) count=128
dev=$(losetup --show -f fs.img)
mkfs.btrfs -f -M $dev
mkdir /tmp/mntpoint
mount $dev /tmp/mntpoint
cd /tmp/mntpoint
xfs_io -f -c "falloc 0 $((64*1024*1024))" testfile
Above script will fail for ENOSPC reason, but indeed fs still has free
space to satisfy this request. Please see call graph:
btrfs_fallocate()
|-> btrfs_alloc_data_chunk_ondemand()
| bytes_may_use += 64M
|-> btrfs_prealloc_file_range()
|-> btrfs_reserve_extent()
|-> btrfs_add_reserved_bytes()
| alloc_type is RESERVE_ALLOC_NO_ACCOUNT, so it does not
| change bytes_may_use, and bytes_reserved += 64M. Now
| bytes_may_use + bytes_reserved == 128M, which is greater
| than btrfs_space_info's total_bytes, false enospc occurs.
| Note, the bytes_may_use decrease operation will be done in
| end of btrfs_fallocate(), which is too late.
Here is another simple case for buffered write:
CPU 1 | CPU 2
|
|-> cow_file_range() |-> __btrfs_buffered_write()
|-> btrfs_reserve_extent() | |
| | |
| | |
| ..... | |-> btrfs_check_data_free_space()
| |
| |
|-> extent_clear_unlock_delalloc() |
In CPU 1, btrfs_reserve_extent()->find_free_extent()->
btrfs_add_reserved_bytes() do not decrease bytes_may_use, the decrease
operation will be delayed to be done in extent_clear_unlock_delalloc().
Assume in this case, btrfs_reserve_extent() reserved 128MB data, CPU2's
btrfs_check_data_free_space() tries to reserve 100MB data space.
If
100MB > data_sinfo->total_bytes - data_sinfo->bytes_used -
data_sinfo->bytes_reserved - data_sinfo->bytes_pinned -
data_sinfo->bytes_readonly - data_sinfo->bytes_may_use
btrfs_check_data_free_space() will try to allcate new data chunk or call
btrfs_start_delalloc_roots(), or commit current transaction in order to
reserve some free space, obviously a lot of work. But indeed it's not
necessary as long as decreasing bytes_may_use timely, we still have
free space, decreasing 128M from bytes_may_use.
To fix this issue, this patch chooses to update bytes_may_use for both
data and metadata in btrfs_add_reserved_bytes(). For compress path, real
extent length may not be equal to file content length, so introduce a
ram_bytes argument for btrfs_reserve_extent(), find_free_extent() and
btrfs_add_reserved_bytes(), it's becasue bytes_may_use is increased by
file content length. Then compress path can update bytes_may_use
correctly. Also now we can discard RESERVE_ALLOC_NO_ACCOUNT, RESERVE_ALLOC
and RESERVE_FREE.
As we know, usually EXTENT_DO_ACCOUNTING is used for error path. In
run_delalloc_nocow(), for inode marked as NODATACOW or extent marked as
PREALLOC, we also need to update bytes_may_use, but can not pass
EXTENT_DO_ACCOUNTING, because it also clears metadata reservation, so
here we introduce EXTENT_CLEAR_DATA_RESV flag to indicate btrfs_clear_bit_hook()
to update btrfs_space_info's bytes_may_use.
Meanwhile __btrfs_prealloc_file_range() will call
btrfs_free_reserved_data_space() internally for both sucessful and failed
path, btrfs_prealloc_file_range()'s callers does not need to call
btrfs_free_reserved_data_space() any more.
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
This patch divides btrfs_update_reserved_bytes() into
btrfs_add_reserved_bytes() and btrfs_free_reserved_bytes(), and
next patch will extend btrfs_add_reserved_bytes（）to fix some
false ENOSPC error, please see later patch for detailed info.
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
In prealloc_file_extent_cluster(), btrfs_check_data_free_space() uses
wrong file offset for reloc_inode, it uses cluster->start and cluster->end,
which indeed are extent's bytenr. The correct value should be
cluster->[start|end] minus block group's start bytenr.
start bytenr cluster->start
| | extent | extent | ...| extent |
|----------------------------------------------------------------|
| block group reloc_inode |
Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
When doing log replay at mount time(after power loss), qgroup will leak
numbers of replayed data extents.
The cause is almost the same of balance.
So fix it by manually informing qgroup for owner changed extents.
The bug can be detected by btrfs/119 test case.
Cc: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-and-Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
This patch fixes a REGRESSION introduced in 4.2, caused by the big quota
rework.
When balancing data extents, qgroup will leak all its numbers for
relocated data extents.
The relocation is done in the following steps for data extents:
1) Create data reloc tree and inode
2) Copy all data extents to data reloc tree
And commit transaction
3) Create tree reloc tree(special snapshot) for any related subvolumes
4) Replace file extent in tree reloc tree with new extents in data reloc
tree
And commit transaction
5) Merge tree reloc tree with original fs, by swapping tree blocks
For 1)~4), since tree reloc tree and data reloc tree doesn't count to
qgroup, everything is OK.
But for 5), the swapping of tree blocks will only info qgroup to track
metadata extents.
If metadata extents contain file extents, qgroup number for file extents
will get lost, leading to corrupted qgroup accounting.
The fix is, before commit transaction of step 5), manually info qgroup to
track all file extents in data reloc tree.
Since at commit transaction time, the tree swapping is done, and qgroup
will account these data extents correctly.
Cc: Mark Fasheh <mfasheh@suse.de>
Reported-by: Mark Fasheh <mfasheh@suse.de>
Reported-by: Filipe Manana <fdmanana@gmail.com>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
Refactor btrfs_qgroup_insert_dirty_extent() function, to two functions:
1. btrfs_qgroup_insert_dirty_extent_nolock()
Almost the same with original code.
For delayed_ref usage, which has delayed refs locked.
Change the return value type to int, since caller never needs the
pointer, but only needs to know if they need to free the allocated
memory.
2. btrfs_qgroup_insert_dirty_extent()
The more encapsulated version.
Will do the delayed_refs lock, memory allocation, quota enabled check
and other things.
The original design is to keep exported functions to minimal, but since
more btrfs hacks exposed, like replacing path in balance, we need to
record dirty extents manually, so we have to add such functions.
Also, add comment for both functions, to info developers how to keep
qgroup correct when doing hacks.
Cc: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-and-Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
We wait on qgroup rescan completion in three places: file system
shutdown, the quota disable ioctl, and the rescan wait ioctl. If the
user sends a signal while we're waiting, we continue happily along. This
is expected behavior for the rescan wait ioctl. It's racy in the shutdown
path but mostly works due to other unrelated synchronization points.
In the quota disable path, it Oopses the kernel pretty much immediately.
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
The qgroup_flags field is overloaded such that it reflects the on-disk
status of qgroups and the runtime state. The BTRFS_QGROUP_STATUS_FLAG_RESCAN
flag is used to indicate that a rescan operation is in progress, but if
the file system is unmounted while a rescan is running, the rescan
operation is paused. If the file system is then mounted read-only,
the flag will still be present but the rescan operation will not have
been resumed. When we go to umount, btrfs_qgroup_wait_for_completion
will see the flag and interpret it to mean that the rescan worker is
still running and will wait for a completion that will never come.
This patch uses a separate flag to indicate when the worker is
running. The locking and state surrounding the qgroup rescan worker
needs a lot of attention beyond this patch but this is enough to
avoid a hung umount.
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by; Jeff Mahoney <jeffm@suse.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
do_chunk_alloc returns 1 when it succeeds to allocate a new chunk.
But flush_space will not convert this to 0, and will also return 1.
As a result, reserve_metadata_bytes will think that flush_space failed,
and may potentially return this value "1" to the caller (depends how
reserve_metadata_bytes was called). The caller will also treat this as an error.
For example, btrfs_block_rsv_refill does:
int ret = -ENOSPC;
...
ret = reserve_metadata_bytes(root, block_rsv, num_bytes, flush);
if (!ret) {
block_rsv_add_bytes(block_rsv, num_bytes, 0);
return 0;
}
return ret;
So it will return -ENOSPC.
Signed-off-by: Alex Lyakas <alex@zadarastorage.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
This adds several ASSERT()' s to report memory leak of block group cache.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
When over 1000 file extents refers to one extent, find_parent_nodes()
will be obviously slow, due to the O(n^2)~O(n^3) loops inside
__merge_refs().
The following ftrace shows the cubic growth of execution time:
256 refs
5) + 91.768 us | __add_keyed_refs.isra.12 [btrfs]();
5) 1.447 us | __add_missing_keys.isra.13 [btrfs]();
5) ! 114.544 us | __merge_refs [btrfs]();
5) ! 136.399 us | __merge_refs [btrfs]();
512 refs
6) ! 279.859 us | __add_keyed_refs.isra.12 [btrfs]();
6) 3.164 us | __add_missing_keys.isra.13 [btrfs]();
6) ! 442.498 us | __merge_refs [btrfs]();
6) # 2091.073 us | __merge_refs [btrfs]();
and 1024 refs
7) ! 368.683 us | __add_keyed_refs.isra.12 [btrfs]();
7) 4.810 us | __add_missing_keys.isra.13 [btrfs]();
7) # 2043.428 us | __merge_refs [btrfs]();
7) * 18964.23 us | __merge_refs [btrfs]();
And sort them into the following char:
(Unit: us)
------------------------------------------------------------------------
Trace function | 256 ref | 512 refs | 1024 refs |
------------------------------------------------------------------------
__add_keyed_refs | 91 | 249 | 368 |
__add_missing_keys | 1 | 3 | 4 |
__merge_refs 1st call | 114 | 442 | 2043 |
__merge_refs 2nd call | 136 | 2091 | 18964 |
------------------------------------------------------------------------
We can see the that __add_keyed_refs() grows almost in linear behavior.
And __add_missing_keys() in this case doesn't change much or takes much
time.
While for the 1st __merge_refs() it's square growth
for the 2nd __merge_refs() call it's cubic growth.
It's no doubt that merge_refs() will take a long long time to execute if
the number of refs continues its grows.
So add a cond_resced() into the loop of __merge_refs().
Although this will solve the problem of soft lockup, we need to use the
new rb_tree based structure introduced by Lu Fengqi to really solve the
long execution time.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
When some critical errors occur and FS would be flipped into RO,
if we have an on-going balance, we can end up with a memory leak
of root->reloc_root since btrfs_drop_snapshots() bails out
without freeing reloc_root at the very early start.
However, we're not able to free reloc_root in btrfs_drop_snapshots()
because its caller, merge_reloc_roots(), still needs to access it to
cleanup reloc_root's rbtree.
This makes us free reloc_root when we're going to free fs/file roots.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
After I add the nft rule "nft add rule filter prerouting reject
with tcp reset", kernel panic happened on my system:
NULL pointer dereference at ...
IP: [<ffffffff81b9db2f>] nf_send_reset+0xaf/0x400
Call Trace:
[<ffffffff81b9da80>] ? nf_reject_ip_tcphdr_get+0x160/0x160
[<ffffffffa0928061>] nft_reject_ipv4_eval+0x61/0xb0 [nft_reject_ipv4]
[<ffffffffa08e836a>] nft_do_chain+0x1fa/0x890 [nf_tables]
[<ffffffffa08e8170>] ? __nft_trace_packet+0x170/0x170 [nf_tables]
[<ffffffffa06e0900>] ? nf_ct_invert_tuple+0xb0/0xc0 [nf_conntrack]
[<ffffffffa07224d4>] ? nf_nat_setup_info+0x5d4/0x650 [nf_nat]
[...]
Because in the PREROUTING chain, routing information is not exist,
then we will dereference the NULL pointer and oops happen.
So we restrict reject expression to INPUT, FORWARD and OUTPUT chain.
This is consistent with iptables REJECT target.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When CONFIG_RANDOMIZE_BASE is selected, we modify the page tables to remap the
kernel at a newly-chosen VA range. We do this with the MMU disabled, but do not
invalidate TLBs prior to re-enabling the MMU with the new tables. Thus the old
mappings entries may still live in TLBs, and we risk violating
Break-Before-Make requirements, leading to TLB conflicts and/or other issues.
We invalidate TLBs when we uninsall the idmap in early setup code, but prior to
this we are subject to issues relating to the Break-Before-Make violation.
Avoid these issues by invalidating the TLBs before the new mappings can be
used by the hardware.
Fixes: f80fb3a3d5 ("arm64: add support for kernel ASLR")
Cc: <stable@vger.kernel.org> # 4.6+
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull thermal fixes from Zhang Rui:
- Fix cpu_cooling to have separate thermal_cooling_device_ops
structures for cpus with and without power model, to avoid NULL
dereference in cpufreq_state2power. From Brendan Jackman.
- Fix a possible NULL dereference in imx_thermal driver. From Corentin
LABBE.
- Another two trivial fixes, one typo fix and one deleting module
owner. From Caesar Wang and Markus Elfring.
* 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
thermal: imx: fix a possible NULL dereference
thermal: trivial: fix the typo
Thermal-INT3406: Delete owner assignment
thermal: cpu_cooling: Fix NULL dereference in cpufreq_state2power
There was a typo when generating endpoint name which
would be very confusing when debugging. Fix it.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
radeon and amdgpu fixes for 4.8. Nothing major:
- fix a performance regression due to the LRU changes in 4.7
- 32 bit fixes
- fix a PLL regression
- misc bug fixes
* 'drm-fixes-4.8' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: skip TV/CV in display parsing
drm/amdgpu: avoid a possible array overflow
drm/amdgpu: fix lru size grouping v2
drm/amdgpu: fix timeout value check in amd_sched_job_recovery
drm/amdgpu: fix sdma_v2_4_ring_test_ib
drm/amdgpu: fix amdgpu_move_blit on 32bit systems
drm/radeon: fix radeon_move_blit on 32bit systems
drm/radeon: only apply the SS fractional workaround to RS[78]80
drm/tegra: Fixes for v4.8-rc4
This contains one fix for DSI runtime power management support that was
introduced in v4.8-rc1. This is slightly more elaborate than I would've
wished, but there are a few corner cases that needed fixing.
* tag 'drm/tegra/for-4.8-rc4' of git://anongit.freedesktop.org/tegra/linux:
drm/tegra: dsi: Enhance runtime power management
Using NFSv4.1 on RDMA should be safe, so broaden the new checks in
rpc_create().
WARN_ON_ONCE is used, matching most other WARN call sites in clnt.c.
Fixes: 39a9beab5a ("rpc: share one xps between all backchannels")
Fixes: d50039ea5e ("nfsd4/rpc: move backchannel create logic...")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: J. Bruce Fields <bfields@fieldses.org>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Commit e6047149db ("dm: use bio op accessors") switched DM over to
using bio_set_op_attrs() but didn't take care to initialize
lc->io_req.bi_op_flags in dm-log.c:rw_header(). This caused
rw_header()'s call to dm_io() to make bio->bi_op_flags be uninitialized
in dm-io.c:do_region(), which ultimately resulted in a SCSI BUG() in
sd_init_command().
Also, adjust rw_header() and its callers to use REQ_OP_{READ|WRITE}.
Fixes: e6047149db ("dm: use bio op accessors")
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Reviewed-by: Shaun Tancheff <shaun.tancheff@seagate.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
v4.8-rc3 commit 99f3c90d0d ("dm flakey: error READ bios during the
down_interval") overlooked the 'drop_writes' feature, which is meant to
allow reads to be issued rather than errored, during the down_interval.
Fixes: 99f3c90d0d ("dm flakey: error READ bios during the down_interval")
Reported-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org
We don't have code to handle any of the noc clocks in rk3399 and they're
all just listed as critical clocks. Let's do the same for
aclk_emmc_noc.
Without this clock being marked as critical we have problems around
suspend/resume after commit 20c389e656 ("clk: rockchip: fix incorrect
aclk_emmc source gate bits on rk3399"). Before that change we were
presumably not actually gating any of these clocks because we were
setting the wrong gate.
Fixes: 20c389e656 ("clk: rockchip: fix incorrect aclk_emmc source gate bits on rk3399")
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
__blk_mq_run_hw_queue() currently warns if we are running the queue on a
CPU that isn't set in its mask. However, this can happen if a CPU is
being offlined, and the workqueue handling will place the work on CPU0
instead. Improve the warning so that it only triggers if the batch cpu
in the hardware queue is currently online. If it triggers for that
case, then it's indicative of a flow problem in blk-mq, so we want to
retain it for that case.
Signed-off-by: Jens Axboe <axboe@fb.com>
We do this in a few places, if the CPU is offline. This isn't allowed,
though, since on multi queue hardware, we can't just move a request
from one software queue to another, if they map to different hardware
queues. The request and tag isn't valid on another hardware queue.
This can happen if plugging races with CPU offlining. But it does
no harm, since it can only happen in the window where we are
currently busy freezing the queue and flushing IO, in preparation
for redoing the software <-> hardware queue mappings.
Signed-off-by: Jens Axboe <axboe@fb.com>
If port_guid is set with the default subnet_prefix, then we get a change
event and run a port refresh, we don't update the port_guid. As a
result, attempts to create a target device that uses the new
subnet_prefix in the wwn will fail to find a match and be rejected by
the ib_srpt driver. This makes it impossible to configure a port if it
was initialized with a default subnet_prefix and later changed to any
non-default subnet-prefix. Updating the port refresh task to always
update the wwn based upon the current subnext_prefix solves this
problem.
Cc: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: nab@linux-iscsi.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
Pull UML fix from Richard Weinberger:
"This contains a fix for a build regression introduced during the merge
window"
* 'for-linus-4.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Don't discard .text.exit section
Pull UBIFS fixes from Richard Weinberger:
"This pull requests contains fixes for two issues in UBI and UBIFS:
- wrong UBIFS assertion.
- a UBIFS xattr regression"
* tag 'upstream-4.8-rc4' of git://git.infradead.org/linux-ubifs:
ubifs: Fix xattr generic handler usage
ubifs: Fix assertion in layout_in_gaps()
Pull xen regression fix from David Vrabel:
"Fix a regression in the xenbus device preventing userspace tools from
working"
* tag 'for-linus-4.8b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: change the type of xen_vcpu_id to uint32_t
xenbus: don't look up transaction IDs for ordinary writes
Tegra114 has a HW bug that the PLLD/PLLD2 lock bit cannot be asserted when
the DIS power domain is during up-powergating process but the clamp to this
domain is not removed yet. That causes a timeout and aborts the power
sequence, although the PLLD/PLLD2 has already locked. To remove the false
alarm, we don't use the lock for PLLD/PLLD2. Just wait 1ms and treat the
clocks as locked.
Signed-off-by: Vince Hsu <vinceh@nvidia.com>
Tested-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
bio_reset doesn't change bi_io_vec and bi_max_vecs, so we don't need to
set them every time. bi_private will be set before the bio is
dispatched.
Signed-off-by: Shaohua Li <shli@fb.com>
Yi reported a memory leak of raid5 with DIF/DIX enabled disks. raid5
doesn't alloc/free bio, instead it reuses bios. There are two issues in
current code:
1. the code calls bio_init (from
init_stripe->raid5_build_block->bio_init) then bio_reset (ops_run_io).
The bio is reused, so likely there is integrity data attached. bio_init
will clear a pointer to integrity data and makes bio_reset can't release
the data
2. bio_reset is called before dispatching bio. After bio is finished,
it's possible we don't free bio's integrity data (eg, we don't call
bio_reset again)
Both issues will cause memory leak. The patch moves bio_init to stripe
creation and bio_reset to bio end io. This will fix the two issues.
Reported-by: Yi Zhang <yizhan@redhat.com>
Signed-off-by: Shaohua Li <shli@fb.com>
For failed write request record block address on a device, not block
address in an array.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Fix to return error code -ENOMEM from the lockres_init() error
handling case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Currently, the code sets MD_JOURNAL_CLEAN when the array has
MD_FEATURE_JOURNAL and the recovery_cp is MaxSector. The array
will be MD_JOURNAL_CLEAN even if the journal device is missing.
With this patch, the MD_JOURNAL_CLEAN is only set when the journal
device presents.
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
We pass xen_vcpu_id mapping information to hypercalls which require
uint32_t type so it would be cleaner to have it as uint32_t. The
initializer to -1 can be dropped as we always do the mapping before using
it and we never check the 'not set' value anyway.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Make the function mlxsw_router_neigh_construct search the rif according
to the neighbour dev other than the dev that was passed to the ndo, thus
allowing creating neigbhours upon stacked devices.
Fixes: 6cf3c971dc ("mlxsw: spectrum_router: Add private neigh table")
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case we have a layer 3 interface on top of a bridge (VLAN / FID RIF),
then we should flood the following packet types to the router:
* Broadcast: If DIP is the broadcast address of the interface, then we
need to be able to get it to CPU by trapping it following route lookup.
* Reserved IP multicast (224.0.0.X): Some control packets (e.g. OSPF)
use this range and are trapped in the router block.
Fixes: 99f44bb352 ("mlxsw: spectrum: Enable L3 interfaces on top of bridge devices")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When reading from a loop device backed by a fuse file it deadlocks on
lock_page().
This is because the page is already locked by the read() operation done on
the loop device. In this case we don't want to either lock the page or
dirty it.
So do what fs/direct-io.c does: only dirty the page for ITER_IOVEC vectors.
Reported-by: Sheng Yang <sheng@yasker.org>
Fixes: aa4d86163e ("block: loop: switch to VFS ITER_BVEC")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org> # v4.1+
Reviewed-by: Sheng Yang <sheng@yasker.org>
Reviewed-by: Ashish Samant <ashish.samant@oracle.com>
Tested-by: Sheng Yang <sheng@yasker.org>
Tested-by: Ashish Samant <ashish.samant@oracle.com>
Current driver is reporting wrong values for max_sge and
max_sge_rd in query_device. This breaks the nfs rdma and iser
in some device profiles. Fixing the driver to report
correct values from FW.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
iwpbl->iwmr points to the structure that contains iwpbl,
which is iwmr. Setting this to NULL would result in
writing to freed memory. So just free iwmr, and return.
Fixes: d374984179 ("i40iw: add files for iwarp interface")
Reported-by: Stefan Assmann <sassmann@redhat.com>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Memory allocated for iwqp; iwqp->allocated_buffer is freed twice in
the create_qp error path. Correct this by having it freed only once in
i40iw_free_qp_resources().
Fixes: d374984179 ("i40iw: add files for iwarp interface")
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
In i40iw_free_virt_mem(), do not set mem->va to NULL
after freeing it as mem->va is a self-referencing pointer
to mem.
Fixes: 4e9042e647 ("i40iw: add hw and utils files")
Reported-by: Stefan Assmann <sassmann@redhat.com>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add NULL check for pdata and pdata->addr before the memcpy in
i40iw_form_cm_frame(). This fixes a NULL pointer de-reference
which occurs when the MPA private data pointer is NULL. Also
only copy pdata->size bytes in the memcpy to prevent reading
past the length of the private data buffer provided by upper layer.
Fixes: f27b4746f3 ("i40iw: add connection management code")
Reported-by: Stefan Assmann <sassmann@redhat.com>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
During an audit for sk_filter(), we found that rx_busy_skb handling
in l2cap_sock_recv_cb() and l2cap_sock_recvmsg() looks not quite as
intended.
The assumption from commit e328140fda ("Bluetooth: Use event-driven
approach for handling ERTM receive buffer") is that errors returned
from sock_queue_rcv_skb() are due to receive buffer shortage. However,
nothing should prevent doing a setsockopt() with SO_ATTACH_FILTER on
the socket, that could drop some of the incoming skbs when handled in
sock_queue_rcv_skb().
In that case sock_queue_rcv_skb() will return with -EPERM, propagated
from sk_filter() and if in L2CAP_MODE_ERTM mode, wrong assumption was
that we failed due to receive buffer being full. From that point onwards,
due to the to-be-dropped skb being held in rx_busy_skb, we cannot make
any forward progress as rx_busy_skb is never cleared from l2cap_sock_recvmsg(),
due to the filter drop verdict over and over coming from sk_filter().
Meanwhile, in l2cap_sock_recv_cb() all new incoming skbs are being
dropped due to rx_busy_skb being occupied.
Instead, just use __sock_queue_rcv_skb() where an error really tells that
there's a receive buffer issue. Split the sk_filter() and enable it for
non-segmented modes at queuing time since at this point in time the skb has
already been through the ERTM state machine and it has been acked, so dropping
is not allowed. Instead, for ERTM and streaming mode, call sk_filter() in
l2cap_data_rcv() so the packet can be dropped before the state machine sees it.
Fixes: e328140fda ("Bluetooth: Use event-driven approach for handling ERTM receive buffer")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
In hci_req_sync_complete the event skb is referenced in hdev->req_skb.
It is used (via hci_req_run_skb) from either __hci_cmd_sync_ev which will
pass the skb to the caller, or __hci_req_sync which leaks.
unreferenced object 0xffff880005339a00 (size 256):
comm "kworker/u3:1", pid 1011, jiffies 4294671976 (age 107.389s)
backtrace:
[<ffffffff818d89d9>] kmemleak_alloc+0x49/0xa0
[<ffffffff8116bba8>] kmem_cache_alloc+0x128/0x180
[<ffffffff8167c1df>] skb_clone+0x4f/0xa0
[<ffffffff817aa351>] hci_event_packet+0xc1/0x3290
[<ffffffff8179a57b>] hci_rx_work+0x18b/0x360
[<ffffffff810692ea>] process_one_work+0x14a/0x440
[<ffffffff81069623>] worker_thread+0x43/0x4d0
[<ffffffff8106ead4>] kthread+0xc4/0xe0
[<ffffffff818dd38f>] ret_from_fork+0x1f/0x40
[<ffffffffffffffff>] 0xffffffffffffffff
Signed-off-by: Frédéric Dalleau <frederic.dalleau@collabora.co.uk>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This patch change default H264 profile from V4L2_MPEG_VIDEO_H264_PROFILE_MAIN
to V4L2_MPEG_VIDEO_H264_PROFILE_HIGH
Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The original code add extra 32 line to visible_height.
It is incorrect, 32 line should be add to coded_height.
The purpose is that user space could calcuate real buffer size needed by using
coded_width * coded_height.
But this method will make v4l2-compliance test fail, since g_fmt != s_fmt(g_fmt)
So remove extend visible_height or coded_height, user space should just
use sizeimage to get real buffer size needed
Signed-off-by: Tiffany Lin <tiffany.lin@mediatek.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
After arbitrary bio size was introduced, the incoming bio may
be very big. We have to split the bio into small bios so that
each holds at most BIO_MAX_PAGES bvecs for safety reason, such
as bio_clone().
This patch fixes the following kernel crash:
> [ 172.660142] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028
> [ 172.660229] IP: [<ffffffff811e53b4>] bio_trim+0xf/0x2a
> [ 172.660289] PGD 7faf3e067 PUD 7f9279067 PMD 0
> [ 172.660399] Oops: 0000 [#1] SMP
> [...]
> [ 172.664780] Call Trace:
> [ 172.664813] [<ffffffffa007f3be>] ? raid1_make_request+0x2e8/0xad7 [raid1]
> [ 172.664846] [<ffffffff811f07da>] ? blk_queue_split+0x377/0x3d4
> [ 172.664880] [<ffffffffa005fb5f>] ? md_make_request+0xf6/0x1e9 [md_mod]
> [ 172.664912] [<ffffffff811eb860>] ? generic_make_request+0xb5/0x155
> [ 172.664947] [<ffffffffa0445c89>] ? prio_io+0x85/0x95 [bcache]
> [ 172.664981] [<ffffffffa0448252>] ? register_cache_set+0x355/0x8d0 [bcache]
> [ 172.665016] [<ffffffffa04497d3>] ? register_bcache+0x1006/0x1174 [bcache]
The issue can be reproduced by the following steps:
- create one raid1 over two virtio-blk
- build bcache device over the above raid1 and another cache device
and bucket size is set as 2Mbytes
- set cache mode as writeback
- run random write over ext4 on the bcache device
Fixes: 54efd50(block: make generic_make_request handle arbitrarily sized bios)
Reported-by: Sebastian Roesner <sroesner-kernelorg@roesner-online.de>
Reported-by: Eric Wheeler <bcache@lists.ewheeler.net>
Cc: stable@vger.kernel.org (4.3+)
Cc: Shaohua Li <shli@fb.com>
Acked-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
nvme_set_features() callers seem to expect that passing NULL as the
result pointer is acceptable. Teach nvme_set_features() not to try to
write to the NULL address.
For symmetry, make the same change to nvme_get_features(), despite the
fact that all current callers pass a valid result pointer.
I assume that this bug hasn't been reported in practice because
the callers that pass NULL are all in the SCSI translation layer
and no one uses the relevant operations.
Cc: stable@vger.kernel.org
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
The MIPI DSI output on Tegra SoCs requires some external logic to
calibrate the MIPI pads before a video signal can be transmitted. This
MIPI calibration logic requires to be powered on while the MIPI pads are
being used, which is currently done as part of the DSI driver's probe
implementation.
This is suboptimal because it will leave the MIPI calibration logic
powered up even if the DSI output is never used.
On Tegra114 and earlier this behaviour also causes the driver to hang
while trying to power up the MIPI calibration logic because the power
partition that contains the MIPI calibration logic will be powered on
by the display controller at output pipeline configuration time. Thus
the power up sequence for the MIPI calibration logic happens before
it's power partition is guaranteed to be enabled.
Fix this by splitting up the API into a request/free pair of functions
that manage the runtime dependency between the DSI and the calibration
modules (no registers are accessed) and a set of enable, calibrate and
disable functions that program the MIPI calibration logic at points in
time where the power partition is really enabled.
While at it, make sure that the runtime power management also works in
ganged mode, which is currently also broken.
Reported-by: Jonathan Hunter <jonathanh@nvidia.com>
Tested-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When tearing down an AUX buf for an event via perf_mmap_close(),
__perf_event_output_stop() is called on the event's CPU to ensure that
trace generation is halted before the process of unmapping and
freeing the buffer pages begins.
The callback is performed via cpu_function_call(), which ensures that it
runs with interrupts disabled and is therefore not preemptible.
Unfortunately, the current code grabs the per-cpu context pointer using
get_cpu_ptr(), which unnecessarily disables preemption and doesn't pair
the call with put_cpu_ptr(), leading to a preempt_count() imbalance and
a BUG when freeing the AUX buffer later on:
WARNING: CPU: 1 PID: 2249 at kernel/events/ring_buffer.c:539 __rb_free_aux+0x10c/0x120
Modules linked in:
[...]
Call Trace:
[<ffffffff813379dd>] dump_stack+0x4f/0x72
[<ffffffff81059ff6>] __warn+0xc6/0xe0
[<ffffffff8105a0c8>] warn_slowpath_null+0x18/0x20
[<ffffffff8112761c>] __rb_free_aux+0x10c/0x120
[<ffffffff81128163>] rb_free_aux+0x13/0x20
[<ffffffff8112515e>] perf_mmap_close+0x29e/0x2f0
[<ffffffff8111da30>] ? perf_iterate_ctx+0xe0/0xe0
[<ffffffff8115f685>] remove_vma+0x25/0x60
[<ffffffff81161796>] exit_mmap+0x106/0x140
[<ffffffff8105725c>] mmput+0x1c/0xd0
[<ffffffff8105cac3>] do_exit+0x253/0xbf0
[<ffffffff8105e32e>] do_group_exit+0x3e/0xb0
[<ffffffff81068d49>] get_signal+0x249/0x640
[<ffffffff8101c273>] do_signal+0x23/0x640
[<ffffffff81905f42>] ? _raw_write_unlock_irq+0x12/0x30
[<ffffffff81905f69>] ? _raw_spin_unlock_irq+0x9/0x10
[<ffffffff81901896>] ? __schedule+0x2c6/0x710
[<ffffffff810022a4>] exit_to_usermode_loop+0x74/0x90
[<ffffffff81002a56>] prepare_exit_to_usermode+0x26/0x30
[<ffffffff81906d1b>] retint_user+0x8/0x10
This patch uses this_cpu_ptr() instead of get_cpu_ptr(), since preemption is
already disabled by the caller.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 95ff4ca26c ("perf/core: Free AUX pages in unmap path")
Link: http://lkml.kernel.org/r/20160824091905.GA16944@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
walk.iv is not assigned a value in blkcipher_walk_init. It makes iv uninitialized.
It is possibly a null value(as shown below), which is then used by aes_p8_encrypt.
This patch moves iv = walk.iv after blkcipher_walk_virt, in which walk.iv is set.
[17856.268050] Unable to handle kernel paging request for data at address 0x00000000
[17856.268212] Faulting instruction address: 0xd000000002ff04bc
7:mon> t
[link register ] d000000002ff47b8 p8_aes_xts_crypt+0x168/0x2a0 [vmx_crypto] (938)
[c000000013b77960] d000000002ff4794 p8_aes_xts_crypt+0x144/0x2a0 [vmx_crypto] (unreliable)
[c000000013b77a70] c000000000544d64 skcipher_decrypt_blkcipher+0x64/0x80
[c000000013b77ac0] d000000003c0175c crypt_convert+0x53c/0x620 [dm_crypt]
[c000000013b77ba0] d000000003c043fc kcryptd_crypt+0x3cc/0x440 [dm_crypt]
[c000000013b77c50] c0000000000f3070 process_one_work+0x1e0/0x590
[c000000013b77ce0] c0000000000f34c8 worker_thread+0xa8/0x660
[c000000013b77d80] c0000000000fc0b0 kthread+0x110/0x130
[c000000013b77e30] c0000000000098f0 ret_from_kernel_thread+0x5c/0x6c
Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We can directly depend on SOC_IMX31 since commit c9ee94965d
("ARM: imx: deconstruct mxc_rnga initialization")
Since that commit, CONFIG_HW_RANDOM_MXC_RNGA could not be switched on
with unknown symbol ARCH_HAS_RNGA and mxc-rnga.o can't be generated with
ARCH=arm make M=drivers/char/hw_random
Previously, HW_RANDOM_MXC_RNGA required ARCH_HAS_RNGA
which was based on IMX_HAVE_PLATFORM_MXC_RNGA && ARCH_MXC.
IMX_HAVE_PLATFORM_MXC_RNGA was based on SOC_IMX31.
Fixes: c9ee94965d ("ARM: imx: deconstruct mxc_rnga initialization")
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Pull vhost bugfix from Michael Tsirkin:
"This includes a single bugfix for vhost-scsi"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost/scsi: fix reuse of &vq->iov[out] in response
Slave devices are not enumerated by ACPI data because the ACPI handle for the
core driver is NULL if it was enumerated by PCI.
Propagate firmware node handle of the PCI device to the platform device.
Suggested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The ARM architected timer driver falls under the drivers/clocksource/
catch-all in MAINTAINERS, and get_maintainers.pl doesn't suggest a
number of people who should be Cc'd.
The ARM architected timer is a core component of ARMv7+VE and ARMv8, and
is critical to the correct operation of both architecture ports (and
their respective KVM code), and patches to it should have review by
knowledgeable interested parties.
This patch adds a MAINTAINERS entry for the driver and its low-level
arch components, such that get_maintainer.pl will always include
relevant interested parties for modifications to the driver. For the
timebeing, this means myself and Marc Zyngier.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1470737036-2082-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
MSI Cubi MS-B120 needs the same fixup as the Gigabyte BXBT-2807 for its
mic to work.
They both use a single 3-way jack for both mic and headset with an
ALC283 codec, with the same pins used.
Cc: Daniel Drake <drake@endlessm.com>
Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It was reported that hibernation could fail on the 2nd attempt, where the
system hangs at hibernate() -> syscore_resume() -> i8237A_resume() ->
claim_dma_lock(), because the lock has already been taken.
However there is actually no other process would like to grab this lock on
that problematic platform.
Further investigation showed that the problem is triggered by setting
/sys/power/pm_trace to 1 before the 1st hibernation.
Since once pm_trace is enabled, the rtc becomes unmeaningful after suspend,
and meanwhile some BIOSes would like to adjust the 'invalid' RTC (e.g, smaller
than 1970) to the release date of that motherboard during POST stage, thus
after resumed, it may seem that the system had a significant long sleep time
which is a completely meaningless value.
Then in timekeeping_resume -> tk_debug_account_sleep_time, if the bit31 of the
sleep time happened to be set to 1, fls() returns 32 and we add 1 to
sleep_time_bin[32], which causes an out of bounds array access and therefor
memory being overwritten.
As depicted by System.map:
0xffffffff81c9d080 b sleep_time_bin
0xffffffff81c9d100 B dma_spin_lock
the dma_spin_lock.val is set to 1, which caused this problem.
This patch adds a sanity check in tk_debug_account_sleep_time()
to ensure we don't index past the sleep_time_bin array.
[jstultz: Problem diagnosed and original patch by Chen Yu, I've solved the
issue slightly differently, but borrowed his excelent explanation of the
issue here.]
Fixes: 5c83545f24 "power: Add option to log time spent in suspend"
Reported-by: Janek Kozicki <cosurgi@gmail.com>
Reported-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: linux-pm@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xunlei Pang <xpang@redhat.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: stable <stable@vger.kernel.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: http://lkml.kernel.org/r/1471993702-29148-3-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When I added some extra sanity checking in timekeeping_get_ns() under
CONFIG_DEBUG_TIMEKEEPING, I missed that the NMI safe __ktime_get_fast_ns()
method was using timekeeping_get_ns().
Thus the locking added to the debug checks broke the NMI-safety of
__ktime_get_fast_ns().
This patch open-codes the timekeeping_get_ns() logic for
__ktime_get_fast_ns(), so can avoid any deadlocks in NMI.
Fixes: 4ca22c2648 "timekeeping: Add warnings when overflows or underflows are observed"
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Cc: stable <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/1471993702-29148-2-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
inet_diag_find_one_icsk takes a reference to a socket that is not
released if sock_diag_destroy returns an error. Fix by changing
tcp_diag_destroy to manage the refcnt for all cases and remove
the sock_put calls from tcp_abort.
Fixes: c1e64e298b ("net: diag: Support destroying TCP sockets")
Reported-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of using sock_tx_timestamp, use skb_tx_timestamp to record
software transmit timestamp of a packet.
sock_tx_timestamp resets and overrides the tx_flags of the skb.
The function is intended to be called from within the protocol
layer when creating the skb, not from a device driver. This is
inconsistent with other drivers and will cause issues for TCP.
In TCP, we intend to sample the timestamps for the last byte
for each sendmsg/sendpage. For that reason, tcp_sendmsg calls
tcp_tx_timestamp only with the last skb that it generates.
For example, if a 128KB message is split into two 64KB packets
we want to sample the SND timestamp of the last packet. The current
code in the tun driver, however, will result in sampling the SND
timestamp for both packets.
Also, when the last packet is split into smaller packets for
retranmission (see tcp_fragment), the tun driver will record
timestamps for all of the retransmitted packets and not only the
last packet.
Fixes: eda2977291 (tun: Support software transmit time stamping.)
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Francis Yan <francisyyan@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After commit ca065d0cf8 ("udp: no longer use SLAB_DESTROY_BY_RCU")
we do not need this special allocation mode anymore, even if it is
harmless.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull f2fs fixes from Jaegeuk Kim:
- fsmark regression
- i_size race condition
- wrong conditions in f2fs_move_file_range
* tag 'for-f2fs-v4.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
f2fs: avoid potential deadlock in f2fs_move_file_range
f2fs: allow copying file range only in between regular files
Revert "f2fs: move i_size_write in f2fs_write_end"
Revert "f2fs: use percpu_rw_semaphore"
The function sctp_diag_dump_one() currently performs a memcpy()
of 64 bytes from a 16 byte field into another 16 byte field. Fix
by using correct size, use sizeof to obtain correct size instead
of using a hard-coded constant.
Fixes: 8f840e47f1 ("sctp: add the sctp_diag.c file")
Signed-off-by: Lance Richardson <lrichard@redhat.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We currently enable interrupts before we enable NAPI. If an RX interrupt
hits before we enabled NAPI then the NAPI callback is never called and
we leave the hardware with RX interrupts disabled, which of course leads
us to never handling received packets. Fix this by moving the interrupt
enable to after we've enable NAPI and the reclaim tasklet.
Fixes: cd5e412347 ("dwc_eth_qos: do phy_start before resetting hardware")
Signed-off-by: Rabin Vincent <rabinv@axis.com>
Signed-off-by: Lars Persson <larper@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
clk_prepare_enable() may fail, so we should better check its return
value and propagate it in the case of failure
While at it, replace __lpc_eth_clock_enable() with a plain
clk_prepare_enable/clk_disable_unprepare() call in order to
simplify the code.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Vladimir Zapolskiy <vz@mleia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PORT_RATE_CONTROL register works differently on 88e6095/6095f/6131
in comparison to 6123/61/65, and 0x0 disables. The distinction was lost
Linux 4.1 --> 4.2
Signed-off-by: Jamie Lentin <jm@lentin.co.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Like the ksz8081, the ksz9031 has the behavior where it will clear the
interrupt enable bits when leaving power down. This takes advantage of the
solution provided by f5aba91.
Signed-off-by: Xander Huff <xander.huff@ni.com>
Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current scatter-gather logic in gianfar is flawed, since
it does not consider the eTSEC's RxBD 'Data Length' field is
context depening: for the last fragment it contains the full
frame size, while fragments contain the fragment size, which
equals the value written to register MRBLR.
This causes data corruption as soon as the hardware starts
to fragment receiving frames. As a result, the size of
fragmented frames is increased by
(nr_frags - 1) * MRBLR
We first noticed this issue working with DSA, where an ICMP
request sized 1472 bytes causes the scatter-gather logic to
kick in. The full Ethernet frame (1518) gets increased by
DSA (4), GMAC_FCB_LEN (8), and FSL_GIANFAR_DEV_HAS_TIMER
(priv->padding=8) to a total of 1538 octets, which is
fragmented by the hardware and reconstructed by the driver
to a 3074 octet frame.
This patch fixes the problem by adjusting the size of
the last fragment.
It was tested by setting MRBLR to different multiples of
64, proving correct scatter-gather operation on frames
with up to 9000 octets in size.
Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The eTSEC register MRBLR defines the maximum space in
the RX buffers and is set to 1536 by gianfar. This
reasonably covers the common use case where the MTU
is kept at default 1500. In that case, the largest
Ethernet frame size of 1518 plus an optional
GMAC_FCB_LEN of 8, and an additional padding of 8
to handle FSL_GIANFAR_DEV_HAS_TIMER totals to 1534
and nicely fit within the chosen MRBLR.
Alas, if the eTSEC is attached to a DSA enabled switch,
the (E)DSA header extension (4 or 8 bytes) causes every
maximum sized frame to be fragmented by the hardware.
This patch increases the maximum RX buffer size by 8
and rounds up to the next multiple of 64, which the
hardware's defines as RX buffer granularity.
Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Laura tracked poll() [and friends] regression caused by commit
e6afc8ace6 ("udp: remove headers from UDP packets before queueing")
udp_poll() needs to know if there is a valid packet in receive queue,
even if its payload length is 0.
Change first_packet_length() to return an signed int, and use -1
as the indication of an empty queue.
Fixes: e6afc8ace6 ("udp: remove headers from UDP packets before queueing")
Reported-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Tested-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan writes:
First round of IIO fixes for the 4.8 cycle.
This is somewhat of a bumper set due to my unavailabilty earlier in the
month. The only slightly unusual ones are the dts updates for the
rockchip adc reset. The fix in the driver only makes sense with these
and the rockchip maintainer is happy with them going through IIO to
reach mainline.
Core stuff
* Fix an issue with a blocking op when !TASK_RUNNING. This been there
a while and snuck in with seemingly minor additions to some core
code paths.
* Tools
- generic_buffer failed to initialize the channel array pointer thus
in the case of no channels blows up trying to free a random memory
address.
* sw-trigger:
- Fix config group initialization when configfs is built as a module.
Drivers
* ad5933
- Fix an incorrect overwrite of an error value.
* ad799x
- A missed assignment of the update_scan_mode callback means buffered mode
doesn't work on the ad7991, ad7995 or ad7999.
* ads1015
- wrong pointer returned from i2c_get_clientdata (missmatch of assumptions)
* am2315
- Timestamps are reported, but never actually acquired from anywhere
(so always 0)
- missing buffer selects in Kconfig
* am335x adc
- Protect fifo1 from concurrent access.
- Increase timeout waiting for ADC to be long enough in all cases.
* as3935
- Timestamps are reported, but never actually acquired from anywhere
(so always 0)
* at91
- Fix reading of channel 3.
* atlas-ph-sensor
- Typo means that the scale of electrical conductivity readings is way off.
* bma220
- Timestamps are reported, but never actually acquired from anywhere
(so always 0)
- Missing buffer selects in Kconfig
* bmp280
- pass the write pointer to PTR_ERR (i.e. the one that was just checked
with IS_ERR).
- suspend /resume crash due to wrong assumption about what dev_get_drvdata
would return.
* hdc100x
- It superficially appeared that smbus_read_byte commands would allow
reading of the outputs in two goes. In reality it doesn't work, but
instead returns the same for the upper and lower bytes (nice catch from
Alison!)
* kxsd9
- Fix raw read return value to ensure it actually reports the value rather
than a blank string.
* max44000
- Missing buffer selects in Kconfig
* rockchip_saradc
- Add use of reset controller to enforce a clean state of the ADC.
Some bootloaders can leave it in an 'intersting' state and effectively
frozen without this. A couple of associated dts updates.
* stk8ba50
- Missing buffer selects in Kconfig
* stx104
- Fix a possible race due to use of devm_iio_device_register when there
was other stuff in the remove function.
We can't initialize the list head on deletion as this causes the node to
point to itself, which causes an infinite loop if vmd_irq() happens to be
servicing that node.
The list initialization was trying to fix a bug from multiple calls to
disable the same IRQ. Fix this instead by having the VMD driver track if
the interrupt is enabled.
[bhelgaas: changelog, add "Fixes"]
Fixes: 97e9230635 ("x86/PCI: VMD: Initialize list item in IRQ disable")
Reported-by: Grzegorz Koczot <grzegorz.koczot@intel.com>
Tested-by: Miroslaw Drost <miroslaw.drost@intel.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by Jon Derrick: <jonathan.derrick@intel.com>
Commit e41f501d39 ("vmlinux.lds: account for destructor sections")
added '.text.exit' to EXIT_TEXT which is discarded at link time by default.
This breaks compilation of UML:
`.text.exit' referenced in section `.fini_array' of
/usr/lib/gcc/x86_64-linux-gnu/6/../../../x86_64-linux-gnu/libc.a(sdlerror.o):
defined in discarded section `.text.exit' of
/usr/lib/gcc/x86_64-linux-gnu/6/../../../x86_64-linux-gnu/libc.a(sdlerror.o)
Apparently UML doesn't want to discard exit text, so let's place all EXIT_TEXT
sections in .exit.text.
Fixes: e41f501d39 ("vmlinux.lds: account for destructor sections")
Reported-by: Stefan Traby <stefan@hello-penguin.com>
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: <stable@vger.kernel.org>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
An assertion in layout_in_gaps() verifies that the gap_lebs pointer is
below the maximum bound. When computing this maximum bound the idx_lebs
count is multiplied by sizeof(int), while C pointers arithmetic does take
into account the size of the pointed elements implicitly already. Remove
the multiplication to fix the assertion.
Fixes: 1e51764a3c ("UBIFS: add new flash file system")
Cc: <stable@vger.kernel.org>
Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
UBSAN complains about a left shift by -1 in proc_do_submiturb(). This
can occur when an URB is submitted for a bulk or control endpoint on
a high-speed device, since the code doesn't bother to check the
endpoint type; normally only interrupt or isochronous endpoints have
a nonzero bInterval value.
Aside from the fact that the operation is illegal, it shouldn't matter
because the result isn't used. Still, in theory it could cause a
hardware exception or other problem, so we should work around it.
This patch avoids doing the left shift unless the shift amount is >= 0.
The same piece of code has another problem. When checking the device
speed (the exponential encoding for interrupt endpoints is used only
by high-speed or faster devices), we need to look for speed >=
USB_SPEED_SUPER as well as speed == USB_SPEED HIGH. The patch adds
this check.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Vittorio Zecca <zeccav@gmail.com>
Tested-by: Vittorio Zecca <zeccav@gmail.com>
Suggested-by: Bjørn Mork <bjorn@mork.no>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull hardened usercopy fixes from Kees Cook:
- avoid signed math problems on unexpected compilers
- avoid false positives at very end of kernel text range checks
* tag 'usercopy-v4.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
usercopy: fix overlap check for kernel text
usercopy: avoid potentially undefined behavior in pointer math
Pull crypto fixes from Herbert Xu:
"This fixes a number of memory corruption bugs in the newly added
sha256-mb/sha256-mb code"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: sha512-mb - fix ctx pointer
crypto: sha256-mb - fix ctx pointer and digest copy
Current cxgb4 arm CQ logic ignores IB_CQ_REPORT_MISSED_EVENTS for
request completion notification on a CQ. Due to this ib_poll_handler()
assumes all events polled and avoids further iopoll scheduling.
This patch adds logic to cxgb4 ib_req_notify_cq() handler to check if
CQ is not empty and return accordingly. Based on the return value of
ib_req_notify_cq() handler, ib_poll_handler() will schedule a run of
iopoll handler.
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
iwdev->mem_resources is incorrectly defined as an unsigned
long instead of u8. As a result, the offset into the dynamic
allocated structures in i40iw_initialize_hw_resources() is
incorrectly calculated and would lead to writing of memory
regions outside of the allocated buffer.
Fixes: 8e06af711b ("i40iw: add main, hdr, status")
Reported-by: Stefan Assmann <sassmann@redhat.com>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
* Reuse existing functionality from memdup_user() instead of keeping
duplicate source code.
This issue was detected by using the Coccinelle software.
* The local variable "ret" will be set to an appropriate value a bit later.
Thus omit the explicit initialisation at the beginning.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Reuse existing functionality from memdup_user() instead of keeping
duplicate source code.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Block/SCSI layout write completion may add committable extents to the
extent tree before updating the layout's last-written byte under the inode
lock. If a sync happens before this value is updated, then
prepare_layoutcommit may find and encode these extents which would produce
a LAYOUTCOMMIT request whose encoded extents are larger than the request's
loca_length.
Fix this by using a last-written byte value that is updated atomically with
the extent tree so that commitable extents always match.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Ensure that the client conforms to the normative behaviour described in
RFC5661 Section 12.7.2: "If a client believes its lease has expired,
it MUST NOT send I/O to the storage device until it has validated its
lease."
So ensure that we wait for the lease to be validated before using
the layout.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Cc: stable@vger.kernel.org # v3.20+
The address of the iovec &vq->iov[out] is not guaranteed to contain the scsi
command's response iovec throughout the lifetime of the command. Rather, it
is more likely to contain an iovec from an immediately following command
after looping back around to vhost_get_vq_desc(). Pass along the iovec
entirely instead.
Fixes: 79c14141a4 ("vhost/scsi: Convert completion path to use copy_to_iter")
Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: ddd17531ad ("ASoC: omap-mcpdm: Clean up with devm_* function")
Managed irq request will not doing any good in ASoC probe level as it is
not going to free up the irq when the driver is unbound from the sound
card.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reported-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
The maximum value allowed for wMaxPacketSize of a high-speed interrupt
endpoint is 1024 bytes, not 1023.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: aed9d65ac3 ("USB: validate wMaxPacketValue entries in endpoint descriptors")
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
PG8, PG9 is said to be the CTS/RTS pins for UART1 according to the A23/33
datasheets. However, the function is wrongly named "uart2" in the pinctrl
driver. This patch fixes this by modifying them to be named "uart1".
Cc: stable@vger.kernel.org
Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Since the non-secure copies of banked registers lack architecturally
defined reset values, there is no actual guarantee when entering in Hyp
from secure-only firmware that the Non-Secure PL1 state will look the
way that kernel entry (in particular the decompressor stub) expects.
So far, we've been getting away with it thanks to implementation details
of ARMv7 cores and/or bootloader behaviour, but for the sake of forwards
compatibility let's try to ensure that we have a minimally sane state
before dropping down into it.
Cc: Russell King <linux@armlinux.org.uk>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Commit d781145549 (""ARM: 8512/1: proc-v7.S: Adjust stack address when
XIP_KERNEL"") introduced a macro which lives under asm/memory.h.
Unfortunately, for MMU-less systems (like R-class) it leads to build failure:
arch/arm/mm/proc-v7.S: Assembler messages:
arch/arm/mm/proc-v7.S:538: Error: unrecognised relocation suffix
make[1]: *** [arch/arm/mm/proc-v7.o] Error 1
make: *** [arch/arm/mm] Error 2
since it is implicitly pulled via asm/pgtable.h for MMU capable systems only.
To fix it include asm/memory.h explicitly.
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Since we switched to use pxa_timer, we need to provide the OSTIMER0
clock. However, as the clock is initialised early, we need to provide
the clock early as well, so that pxa_timer can find it. Adding the
clock to the clkdev table at core_initcall() time is way too late.
Move the initialisation earlier.
Fixes: ee3a4020f7 ("ARM: 8250/1: sa1100: provide OSTIMER0 clock for pxa_timer")
Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Encoding of the metadata was using the padded length as opposed to
the real length of the data which is a bug per specification.
This has not been an issue todate because all metadatum specified
so far has been 32 bit where aligned and data length are the same width.
This also includes a bug fix for validating the length of a u16 field.
But since there is no metadata of size u16 yes we are fine to include it
here.
While at it get rid of magic numbers.
Fixes: ef6980b6be ("net sched: introduce IFE action")
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
check_bogus_address() checked for pointer overflow using this expression,
where 'ptr' has type 'const void *':
ptr + n < ptr
Since pointer wraparound is undefined behavior, gcc at -O2 by default
treats it like the following, which would not behave as intended:
(long)n < 0
Fortunately, this doesn't currently happen for kernel code because kernel
code is compiled with -fno-strict-overflow. But the expression should be
fixed anyway to use well-defined integer arithmetic, since it could be
treated differently by different compilers in the future or could be
reported by tools checking for undefined behavior.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Driver never bothered marking the VF's vport with the VF's sw_fid.
As a result, FLR flows are not going to clean those vports.
If the vport was active when FLRed, re-activating it would lead
to a FW assertion.
Fixes: dacd88d6f6 ("qed: IOV l2 functionality")
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In b8247f095e,
"net: ip_finish_output_gso: If skb_gso_network_seglen exceeds MTU, allow segmentation for local udp tunneled skbs"
gso skbs arriving from an ingress interface that go through UDP
tunneling, are allowed to be fragmented if the resulting encapulated
segments exceed the dst mtu of the egress interface.
This aligned the behavior of gso skbs to non-gso skbs going through udp
encapsulation path.
However the non-gso vs gso anomaly is present also in the following
cases of a GRE tunnel:
- ip_gre in collect_md mode, where TUNNEL_DONT_FRAGMENT is not set
(e.g. OvS vport-gre with df_default=false)
- ip_gre in nopmtudisc mode, where IFLA_GRE_IGNORE_DF is set
In both of the above cases, the non-gso skbs get fragmented, whereas the
gso skbs (having skb_gso_network_seglen that exceeds dst mtu) get dropped,
as they don't go through the segment+fragment code path.
Fix: Setting IPSKB_FRAG_SEGS if the tunnel specified IP_DF bit is NOT set.
Tunnels that do set IP_DF, will not go to fragmentation of segments.
This preserves behavior of ip_gre in (the default) pmtudisc mode.
Fixes: b8247f095e ("net: ip_finish_output_gso: If skb_gso_network_seglen exceeds MTU, allow segmentation for local udp tunneled skbs")
Reported-by: wenxu <wenxu@ucloud.cn>
Cc: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Tested-by: wenxu <wenxu@ucloud.cn>
Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If DAD fails with accept_dad set to 2, global addresses and host routes
are incorrectly left in place. Even though disable_ipv6 is set,
contrary to documentation, the addresses are not dynamically deleted
from the interface. It is only on a subsequent link down/up that these
are removed. The fix is not only to set the disable_ipv6 flag, but
also to call addrconf_ifdown(), which is the action to carry out when
disabling IPv6. This results in the addresses and routes being deleted
immediately. The DAD failure for the LL addr is determined as before
via netlink, or by the absence of the LL addr (which also previously
would have had to be checked for in case of an intervening link down
and up). As the call to addrconf_ifdown() requires an rtnl lock, the
logic to disable IPv6 when DAD fails is moved to addrconf_dad_work().
Previous behavior:
root@vm1:/# sysctl net.ipv6.conf.eth3.accept_dad=2
net.ipv6.conf.eth3.accept_dad = 2
root@vm1:/# ip -6 addr add 2000::10/64 dev eth3
root@vm1:/# ip link set up eth3
root@vm1:/# ip -6 addr show dev eth3
5: eth3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qlen 1000
inet6 2000::10/64 scope global
valid_lft forever preferred_lft forever
inet6 fe80::5054:ff:fe43:dd5a/64 scope link tentative dadfailed
valid_lft forever preferred_lft forever
root@vm1:/# ip -6 route show dev eth3
2000::/64 proto kernel metric 256
fe80::/64 proto kernel metric 256
root@vm1:/# ip link set down eth3
root@vm1:/# ip link set up eth3
root@vm1:/# ip -6 addr show dev eth3
root@vm1:/# ip -6 route show dev eth3
root@vm1:/#
New behavior:
root@vm1:/# sysctl net.ipv6.conf.eth3.accept_dad=2
net.ipv6.conf.eth3.accept_dad = 2
root@vm1:/# ip -6 addr add 2000::10/64 dev eth3
root@vm1:/# ip link set up eth3
root@vm1:/# ip -6 addr show dev eth3
root@vm1:/# ip -6 route show dev eth3
root@vm1:/#
Signed-off-by: Mike Manning <mmanning@brocade.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes these compiler warnings via libc-compat.h when glibc netipx/ipx.h is
included before linux/ipx.h:
./linux/ipx.h:9:8: error: redefinition of ‘struct sockaddr_ipx’
./linux/ipx.h:26:8: error: redefinition of ‘struct ipx_route_definition’
./linux/ipx.h:32:8: error: redefinition of ‘struct ipx_interface_definition’
./linux/ipx.h:49:8: error: redefinition of ‘struct ipx_config_data’
./linux/ipx.h:58:8: error: redefinition of ‘struct ipx_route_def’
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kernel uapi header are supposed to use them. Fixes userspace compile error:
linux/openvswitch.h:583:2: error: unknown type name ‘uint32_t’
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes userspace compile error:
error: field ‘real’ has incomplete type
struct timeval real; /* real (wall-clock) time */
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes userspace compiler error:
error: unknown type name ‘uint32_t’
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes userspace compilation errors:
error: field ‘addr’ has incomplete type
struct sockaddr_in addr; /* IP address and port to send to */
error: field ‘addr’ has incomplete type
struct sockaddr_in6 addr; /* IP address and port to send to */
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes userspace compilation errors like:
error: field ‘addr’ has incomplete type
struct sockaddr_in addr; /* IP address and port to send to */
^
error: field ‘addr’ has incomplete type
struct sockaddr_in6 addr; /* IP address and port to send to */
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes userspace compilation errors like:
error: field ‘iph’ has incomplete type
error: field ‘prefix’ has incomplete type
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes userspace compilation error:
error: ‘IFNAMSIZ’ undeclared here (not in a function)
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull ARC fixes from Vineet Gupta:
- support for Syscall ABI v4 with upstream gcc 6.x
- lockdep fix (Daniel Mentz)
- gdb register clobber (Liav Rehana)
- couple of missing exports for modules
- other fixes here and there
* tag 'arc-4.8-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: export __udivdi3 for modules
ARC: mm: fix build breakage with STRICT_MM_TYPECHECKS
ARC: export kmap
ARC: Support syscall ABI v4
ARC: use correct offset in pt_regs for saving/restoring user mode r25
ARC: Elide redundant setup of DMA callbacks
ARC: Call trace_hardirqs_on() before enabling irqs
Pull GPIO fixes from Linus Walleij:
"Here are a few GPIO fixes for v4.8.
I was expecting some fallout from the new chardev rework but nothing
like that turned up att all. Instead a Kconfig confusion that I think
I have finally nailed, then some ordinary driver noise and trivia.
This fixes a Kconfig issue with UM: when I made GPIOLIB available to
all archs, that included UM, but the OF part of GPIOLIB requires
HAS_IOMEM, so we add HAS_IOMEM as a dependency to OF_GPIO.
This in turn exposed the fact that a few GPIO drivers were implicitly
assuming OF_GPIO as their dependency but instead depended on OF alone
(the typical problem being a pointer inside gpio_chip not existing
unless OF_GPIO is selected) and then UM would fail to compile with
these drivers instead. Then I lost patience and made any GPIO driver
depending on just OF depend on OF_GPIO instead, that is certainly what
they meant and the only thing that makes sense anyway. GPIO with just
OF but !OF_GPIO does not make sense.
Also a fix for the max730x driver data pointer, and a minor comment
fix for the GPIO tools"
* tag 'gpio-v4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: make any OF dependent driver depend on OF_GPIO
gpio: Fix OF build problem on UM
gpio: max730x: set gpiochip data pointer before using it
tools/gpio: fix gpio-event-mon header comment
ADS7846 regulator is disabled twice in a row in ads7846_remove(). Valid
one is in ads7846_disable().
Removing the ads7846 module causes warning about unbalanced disables.
...
WARNING: CPU: 0 PID: 29269 at drivers/regulator/core.c:2251 _regulator_disable+0xf8/0x130
unbalanced disables for vads7846
CPU: 0 PID: 29269 Comm: rmmod Tainted: G D W 4.7.0+ #3
Hardware name: HTC Magician
...
show_stack+0x10/0x14
__warn+0xd8/0x100
warn_slowpath_fmt+0x38/0x48
_regulator_disable+0xf8/0x130
regulator_disable+0x34/0x60
ads7846_remove+0x58/0xd4 [ads7846]
spi_drv_remove+0x1c/0x34
__device_release_driver+0x84/0x114
driver_detach+0x8c/0x90
bus_remove_driver+0x5c/0xc8
SyS_delete_module+0x1a0/0x238
ret_fast_syscall+0x0/0x38
Signed-off-by: Petr Cvek <petr.cvek@tul.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The silead code is using devm_foo for everything (and does not free
any resources). Except that it is using gpiod_get instead of
devm_gpiod_get (but is not freeing the gpio_desc), change this
to use devm_gpiod_get so that the gpio will be properly released.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The i40iw initiator sends an MPA-request with ird=16 and ord=16. The cxgb4
responder sends an MPA-reply with ord = 32 causing i40iw to terminate
due to insufficient resources.
The logic to reduce the ORD to <= peer's IRD was wrong.
Reported-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The i40iw initiator sends an MPA-request with ird = 63, ord = 63. The
cxgb4 responder sends a RST. Since the inbound ord=63 and it exceeds
the max_ird/c4iw_max_read_depth (=32 default), chelsio decides to abort.
Instead, cxgb4 should adjust the ord/ird down before presenting it to
the ULP.
Reported-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The unwind logic for creating a user QP has a double vfree
of the non-shared receive queue when handling a "too many qps"
failure.
The code unwinds the mmmap info by decrementing a reference
count which will call rvt_release_mmap_info() which in turn
does the vfree() of the r_rq.wq. The unwind code then does
the same free.
Fix by guarding the vfree() with the same test that is done
in close and only do the vfree() if qp->ip is NULL.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Previously, J_KEY generation was based on the lower 16 bits
of the user's UID. While this works, it was not good enough
as a non-root user could collide with a root user given a
sufficiently large UID.
This patch attempt to improve the J_KEY generation by using
the following algorithm:
The 16 bit J_KEY space is partitioned into 3 separate spaces
reserved for different user classes:
* all users with administtor privileges (including 'root')
will use J_KEYs in the range of 0 to 31,
* all kernel protocols, which use KDETH packets will use
J_KEYs in the range of 32 to 63, and
* all other users will use J_KEYs in the range of 64 to
65535.
The above separation is aimed at preventing different user levels
from sending packets to each other and, additionally, separate
kernel protocols from all other types of users. The later is meant
to prevent the potential corruption of kernel memory by any other
type of user.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Mitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The driver does not check if the CableInfo query is supported for the
port type. Return early if CableInfo is not supported for the port type,
making compliance with the specification explicit and preventing lower
level code from potentially doing the wrong thing if the query is not
supported for the hardware implementation.
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The Soft RoCE (rxe) is located in drivers/inifiniband/sw
and not in drivers/infiniband/hw/.
This patch fixes it.
Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If 'pci_register_driver' fails, we return 'err' which is known to be 0.
Return the error instead.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The monitor values from bytes 22 through 81 of the QSFP memory space
(SFF 8636) are dynamic and serving them out of the QSFP memory cache
maintained by the driver provides stale data to the CableInfo SMA query.
This patch refreshes the dynamic values from the QSFP memory on request
and overwrites the stale data from the cache for the overlap between the
requested range and the monitor range.
Reviewed-by: Jubin John <jubin.john@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Easwar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The qp init function does a kzalloc() while holding the RCU
lock that encounters the following warning with a debug kernel
when a cat of the qp_stats is done:
[ 231.723948] rcu_scheduler_active = 1, debug_locks = 0
[ 231.731939] 3 locks held by cat/11355:
[ 231.736492] #0: (debugfs_srcu){......}, at: [<ffffffff813001a5>] debugfs_use_file_start+0x5/0x90
[ 231.746955] #1: (&p->lock){+.+.+.}, at: [<ffffffff81289a6c>] seq_read+0x4c/0x3c0
[ 231.755873] #2: (rcu_read_lock){......}, at: [<ffffffffa0a0c535>] _qp_stats_seq_start+0x5/0xd0 [hfi1]
[ 231.766862]
The init functions do an implicit next which requires the rcu read lock
before the kzalloc().
Fix for both drivers is to change the scope of the init function to only
do the allocation and the initialization of the just allocated iter.
The implict next is moved back into the respective start functions to fix
the issue.
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
CC: <stable@vger.kernel.org> # 4.6.x-
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Fix to return error code -ENOMEM from the alloc error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
'work' and 'route->path_rec' are malloced in cma_resolve_iboe_route()
and should be freed before leaving from the error handling cases,
otherwise it will cause memory leak.
Fixes: 200298326b ('IB/core: Validate route when we init ah')
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Reviewed-by: Haggai Eran <haggaie@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If CONFIG_FRAME_WARN is small (1K) and CONFIG_NR_CPUS big
then a frame size warning is triggered during build.
Allocate the cpu mask dynamically to silence the warning.
Reviewed-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Error code EAGAIN should be used when errors are temporary and next call
might succeeds.
When error code other than EAGAIN is returned, the caller (mlx4_ib_poll)
will assume all CQE in the same bunch are error too and will drop them all.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The cec-funcs.h header was missing support for these three vendor-specific messages:
CEC_MSG_VENDOR_COMMAND
CEC_MSG_VENDOR_COMMAND_WITH_ID
CEC_MSG_VENDOR_REMOTE_BUTTON_DOWN
Add wrappers for these messages.
I originally postponed adding these wrappers due to the fact that the argument is
just a byte array which cec-ctl couldn't handle at the time, and then I just forgot
to add them once the CEC framework was finalized.
It wasn't until an attempt to transmit a vendor specific command was made that I
realized that these wrappers were missing.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The cec_get_edid_spa_location() function did not verify that the IEEE
identifier in the Vendor Specific Data Block matched the HDMI-LLC
identifier. This could result in the wrong VSDB block being returned.
For example, for HDMI 2.0 EDIDs there is also a HDMI Forum VSDB.
So check the IEEE identifier as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Support more error codes and fix a bug where MSGCODE_TRANSMIT_FAILED_LINE
was mapped to CEC_TX_STATUS_ARB_LOST, which is wrong.
Thanks to Pulse-Eight for providing me with the information needed
to handle this correctly (I hope).
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Don't hardcode the signal free time to 3 bit periods, instead use
the value for the signal free time as passed in by the CEC framework.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This fixes this kbuild test robot error:
tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
head: 329f415291
commit: c1023ba74f [media] drivers/media/platform/Kconfig: fix VIDEO_MEDIATEK_VCODEC dependency
config: m32r-allyesconfig (attached as .config)
compiler: m32r-linux-gcc (GCC) 4.9.0
reproduce:
wget https://git.kernel.org/cgit/linux/kernel/git/wfg/lkp-tests.git/plain/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
git checkout c1023ba74f
# save the attached .config to linux build tree
make.cross ARCH=m32r
All errors (new ones prefixed by >>):
drivers/media/v4l2-core/videobuf2-dma-contig.c: In function 'vb2_dc_get_userptr':
>> >> drivers/media/v4l2-core/videobuf2-dma-contig.c:486:2: error: implicit declaration of function 'dma_get_cache_alignment' [-Werror=implicit-function-declaration]
unsigned long dma_align = dma_get_cache_alignment();
^
cc1: some warnings being treated as errors
This driver depends on HAS_DMA for dma_get_cache_alignment().
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Most CEC adapters will still receive broadcast messages, even if no logical
addresses are claimed. But those messages should only be passed on for
monitoring purposes, but not for processing by either kernel or userspace
if userspace didn't call CEC_ADAP_S_LOG_ADDRS first.
So if adap->log_addrs.log_addr_mask is 0, then just return before passing
the received message on to the processing code.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Up to 4 logical addresses can be claimed. Make sure that any
unclaimed logical addresses are set to CEC_LOG_ADDR_INVALID as
per the documentation.
Take special care in the unregistered case: when falling back to
unregistered num_log_addrs may be > 1, so mark those as invalid.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Currently if none of the requested logical addresses can be claimed, the
framework will fall back to the Unregistered logical address.
Add a flag to enable this explicitly. By default it will just go back to
the unconfigured state.
Usually Unregistered is not something you want since the functionality is
very limited. Unless the application has support for this, it will fail
to work correctly. So require that the application explicitly requests
this.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
If an IRQ is setup using __setup_irq(), which is used by the
request_irq() family of functions, and we are using an SMP kernel then
the affinity of the IRQ will be set via setup_affinity() immediately
after the IRQ is enabled. This call to gic_set_affinity() will lead to
the interrupt being mapped to a VPE. However there are other ways to use
IRQs which don't cause affinity to be set, for example if it is used to
chain to another IRQ controller with irq_set_chained_handler_and_data().
The irq_set_chained_handler_and_data() code path will enable the IRQ,
but will not trigger a call to gic_set_affinity() and in this case
nothing will map the interrupt to a VPE, meaning that the interrupt is
never received.
Fix this by implementing the activate operation for the GIC device IRQ
domain, using gic_shared_irq_domain_map() to map the interrupt to the
correct pin of cpu 0.
Fixes: c98c1822ee ("irqchip/mips-gic: Add device hierarchy domain")
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20160819170715.27820-2-paul.burton@imgtec.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
gic_shared_irq_domain_map() is called from gic_irq_domain_alloc() where
the wrong chip has been set, and is then overwritten. Tidy this up by
setting the correct chip the first time, and setting the
handle_level_irq handler from gic_irq_domain_alloc() too.
gic_shared_irq_domain_map() is also called from gic_irq_domain_map(),
which now calls irq_set_chip_and_handler() to retain its previous
behaviour.
This patch prepares for a follow-on which will call
gic_shared_irq_domain_map() from a callback where the lock on the struct
irq_desc is held, which without this change would cause the call to
irq_set_chip_and_handler() to lead to a deadlock.
Fixes: c98c1822ee ("irqchip/mips-gic: Add device hierarchy domain")
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20160819170715.27820-1-paul.burton@imgtec.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The documentation for the cec_event_state_change struct was incomplete.
This patch documents what happens in the corner cases.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
A reply parameter is added to the cec_msg_record_on/off functions in
cec-funcs.h. The standard mandates that Record Status shall be replied
to Record On, and it may be replied to Record Off.
Signed-off-by: Johan Fjeldtvedt <jaffe1@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
- The global lock was used in cec_get_device when it should have
used the devnode lock.
- cec_put_device also took the global lock, but since the release
function takes that lock as well this could lead to a deadlock.
Just don't take the lock here since there is no reason for it.
- cec_devnode_register() should take the global lock when clearing
the bit in the global bitmap.
- In cec_devnode_unregister() place the devnode->(un)register tests
and assignments under the devnode lock as well: this has to be
in a critical block.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This lock will be used to protect more than just the fhs list.
So rename it to just 'lock'.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
A station pointer can be passed to the driver on tx, before it has been
marked as associated. Since ath9k_sta_state was initializing the entry
too late, it resulted in some spurious crashes.
Fixes: df3c6eb34d ("ath9k: Use sta_state() callback")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
The Cherryview GPIO controller has 8 or 16 wires connected to the I/O-APIC
which can be used directly by the platform/BIOS or drivers. One such wire
is used as SCI (System Control Interrupt) which ACPI depends on to be able
to trigger GPEs (General Purpose Events).
The pinctrl driver itself uses another IRQ resource which is wire OR of all
the 8 (or 16) wires and follows what BIOS has programmed to the IntSel
register of each pin.
Currently the driver masks all interrupts at probe time and this prevents
these direct interrupts from working as expected. The reason for this is
that some early stage prototypes had some pins misconfigured causing lots
of spurious interrupts.
We fix this by leaving the interrupt mask untouched. This allows SCI and
other direct interrupts work properly. What comes to the possible spurious
interrupts we switch the default handler to be handle_bad_irq() instead of
handle_simple_irq() (which was not correct anyway).
Reported-by: Yu C Chen <yu.c.chen@intel.com>
Reported-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
A previous patch attempted to fix the pinmuxes for mfio 84 - 89, but it
omitted a change to pistachio_pin_group pistachio_groups, which results
in incorrect pll_lock signals being routed.
Apply the correct mux settings throughout the driver.
fixes: cefc03e599 ("pinctrl: Add Pistachio SoC pin control driver")
fixes: e9adb336d0 ("pinctrl: pistachio: fix mfio84-89 function description and pinmux.")
Cc: <stable@vger.kernel.org> # 4.4.x-
Signed-off-by: James Hartley <james.hartley@imgtec.com>
Reviewed-by: Sifan Naeem <Sifan.Naeem@imgtec.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When we write watermark values to the hardware, those values are stored
in dev_priv->wm.skl_hw. However with recent watermark changes, the
results structure we're copying from only contains valid watermark and
DDB values for the pipes that are actually changing; the values for
other pipes remain 0. Thus a blind copy of the entire skl_wm_values
structure will clobber the values for unchanged pipes...we need to be
more selective and only copy over the values for the changing pipes.
This mistake was hidden until recently due to another bug that caused us
to erroneously re-calculate watermarks for all active pipes rather than
changing pipes. Only when that bug was fixed was the impact of this bug
discovered (e.g., modesets failing with "Requested display configuration
exceeds system watermark limitations" messages and leaving watermarks
non-functional, even ones initiated by intel_fbdev_restore_mode).
Changes since v1:
- Add a function for copying a pipe's wm values
(skl_copy_wm_for_pipe()) so we can reuse this later
Fixes: 734fa01f3a ("drm/i915/gen9: Calculate watermarks during atomic 'check' (v2)")
Fixes: 9b61302274 ("drm/i915/gen9: Re-allocate DDB only for changed pipes")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Lyude <cpaul@redhat.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-4-git-send-email-cpaul@redhat.com
(cherry picked from commit 2722efb90b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Since the watermark calculations for Skylake are still broken, we're apt
to hitting underruns very easily under multi-monitor configurations.
While it would be lovely if this was fixed, it's not. Another problem
that's been coming from this however, is the mysterious issue of
underruns causing full system hangs. An easy way to reproduce this with
a skylake system:
- Get a laptop with a skylake GPU, and hook up two external monitors to
it
- Move the cursor from the built-in LCD to one of the external displays
as quickly as you can
- You'll get a few pipe underruns, and eventually the entire system will
just freeze.
After doing a lot of investigation and reading through the bspec, I
found the existence of the SAGV, which is responsible for adjusting the
system agent voltage and clock frequencies depending on how much power
we need. According to the bspec:
"The display engine access to system memory is blocked during the
adjustment time. SAGV defaults to enabled. Software must use the
GT-driver pcode mailbox to disable SAGV when the display engine is not
able to tolerate the blocking time."
The rest of the bspec goes on to explain that software can simply leave
the SAGV enabled, and disable it when we use interlaced pipes/have more
then one pipe active.
Sure enough, with this patchset the system hangs resulting from pipe
underruns on Skylake have completely vanished on my T460s. Additionally,
the bspec mentions turning off the SAGV with more then one pipe enabled
as a workaround for display underruns. While this patch doesn't entirely
fix that, it looks like it does improve the situation a little bit so
it's likely this is going to be required to make watermarks on Skylake
fully functional.
This will still need additional work in the future: we shouldn't be
enabling the SAGV if any of the currently enabled planes can't enable WM
levels that introduce latencies >= 30 µs.
Changes since v11:
- Add skl_can_enable_sagv()
- Make sure we don't enable SAGV when not all planes can enable
watermarks >= the SAGV engine block time. I was originally going to
save this for later, but I recently managed to run into a machine
that was having problems with a single pipe configuration + SAGV.
- Make comparisons to I915_SKL_SAGV_NOT_CONTROLLED explicit
- Change I915_SAGV_DYNAMIC_FREQ to I915_SAGV_ENABLE
- Move printks outside of mutexes
- Don't print error messages twice
Changes since v10:
- Apparently sandybridge_pcode_read actually writes values and reads
them back, despite it's misleading function name. This means we've
been doing this mostly wrong and have been writing garbage to the
SAGV control. Because of this, we no longer attempt to read the SAGV
status during initialization (since there are no helpers for this).
- mlankhorst noticed that this patch was breaking on some very early
pre-release Skylake machines, which apparently don't allow you to
disable the SAGV. To prevent machines from failing tests due to SAGV
errors, if the first time we try to control the SAGV results in the
mailbox indicating an invalid command, we just disable future attempts
to control the SAGV state by setting dev_priv->skl_sagv_status to
I915_SKL_SAGV_NOT_CONTROLLED and make a note of it in dmesg.
- Move mutex_unlock() a little higher in skl_enable_sagv(). This
doesn't actually fix anything, but lets us release the lock a little
sooner since we're finished with it.
Changes since v9:
- Only enable/disable sagv on Skylake
Changes since v8:
- Add intel_state->modeset guard to the conditional for
skl_enable_sagv()
Changes since v7:
- Remove GEN9_SAGV_LOW_FREQ, replace with GEN9_SAGV_IS_ENABLED (that's
all we use it for anyway)
- Use GEN9_SAGV_IS_ENABLED instead of 0x1 for clarification
- Fix a styling error that snuck past me
Changes since v6:
- Protect skl_enable_sagv() with intel_state->modeset conditional in
intel_atomic_commit_tail()
Changes since v5:
- Don't use is_power_of_2. Makes things confusing
- Don't use the old state to figure out whether or not to
enable/disable the sagv, use the new one
- Split the loop in skl_disable_sagv into it's own function
- Move skl_sagv_enable/disable() calls into intel_atomic_commit_tail()
Changes since v4:
- Use is_power_of_2 against active_crtcs to check whether we have > 1
pipe enabled
- Fix skl_sagv_get_hw_state(): (temp & 0x1) indicates disabled, 0x0
enabled
- Call skl_sagv_enable/disable() from pre/post-plane updates
Changes since v3:
- Use time_before() to compare timeout to jiffies
Changes since v2:
- Really apply minor style nitpicks to patch this time
Changes since v1:
- Added comments about this probably being one of the requirements to
fixing Skylake's watermark issues
- Minor style nitpicks from Matt Roper
- Disable these functions on Broxton, since it doesn't have an SAGV
Signed-off-by: Lyude <cpaul@redhat.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1471463761-26796-3-git-send-email-cpaul@redhat.com
[mlankhorst: ENOSYS -> ENXIO, whitespace fixes]
(cherry picked from commit 656d1b89e5)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In the recent patch
bc3d674 drm/i915: Allow userspace to request no-error-capture upon ...
the final version moved the flags and the associated #defines around
so they were adjacent; unfortunately, they ended up between a comment
and the thing (hw_id) to which the comment applies :(
So this patch reshuffles the comment and subject back together.
Also, as we're touching 'hw_id', let's change it from just 'unsigned'
to a fully-specified 'unsigned int', because some code checking tools
(including checkpatch) object to plain 'unsigned'.
Fixes: bc3d674462 ("drm/i915: Allow userspace to request no-error-capture...")
Signed-off-by: Dave Gordon <david.s.gordon@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1471616622-6919-1-git-send-email-david.s.gordon@intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 0be81156b3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The commit 02fc76f6a changed base of the sysfs attributes from device to card.
The "show" callbacks dereferenced wrong objects because of this.
Fixes: 02fc76f6a7 ('ALSA: line6: Create sysfs via snd_card_add_dev_attr()')
Cc: <stable@vger.kernel.org> # v4.0+
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Andrej Krutak <dev@andree.sk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If there's an error, pcm is released in line6_pcm_acquire already.
Fixes: 247d95ee6d ('ALSA: line6: Handle error from line6_pcm_acquire()')
Cc: <stable@vger.kernel.org> # v4.0+
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Andrej Krutak <dev@andree.sk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull genirq/irqchip fixes for 4.8-rc4 from Marc Zygnier
- A critical fix for chained irqchip where we failed to configure
the cascade interrupt trigger
- A GIC fix for self-IPI in SMP-on-UP configurations
- A PM fix for GICv3
- A initialization fix the the GICv3 ITS, triggered by kexec
When usb gadget is set gadget serial function, it will be crash in below
situation.
It will clean the 'port->port_usb' pointer in gserial_disconnect() function
when usb link is inactive, but it will release lock for disabling the endpoints
in this function. Druing the lock release period, it maybe complete one request
to issue gs_write_complete()--->gs_start_tx() function, but the 'port->port_usb'
pointer had been set NULL, thus it will be crash in gs_start_tx() function.
This patch adds the 'port->port_usb' pointer checking in gs_start_tx() function
to avoid this situation.
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
__dwc3_gadget_wakeup() is called while holding a spinlock, then depends on
jiffies in order to timeout while polling the USB core for a link state
update. In the case the wakeup failed, the timeout will never happen and
will also cause the cpu to stall until rcu_preempt kicks in.
This switches to a "decrement variable and wait" timeout scheme.
Signed-off-by: Nicolas Saenz Julienne <nicolassaenzj@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
In eth_start_xmit, the socket buffer may be NULL. So, add NULL pointer
check at .wrap API.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
In eth_start_xmit, the socket buffer may be NULL. So, add NULL pointer
check at .wrap API.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
In case of error, the function usb_get_phy() returns ERR_PTR() and never
returns NULL. The NULL test in the return value check should be replaced
with IS_ERR().
Fixes: b5a2875605 ("usb: renesas_usbhs: Allow an OTG PHY driver to
provide VBUS")
Cc: <stable@vger.kernel.org> # v4.3+
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
After going through runtime_suspend/runtime_resume
cycle once we would be left with an unbalanced
pm_runtime_get() call. Fix that by making sure that
we try to suspend right after resuming so things are
balanced and device can runtime_suspend again.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
During runtime_resume of dwc3-pci.c, we need to
runtime suspend our child device (which is dwc3
proper) otherwise nothing will happen.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
of_match_device could return NULL, and so cause a NULL pointer
dereference later at line 850:
mdma->soc = match->data;
For fixing this problem, we use of_device_get_match_data(), this will
simplify the code a little by using a standard function for
getting the match data.
This was reported by coverity (CID 1324134)
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
free_irq() expects the same device identity that was passed to
corresponding request_irq(), otherwise the IRQ is not freed.
Fixes: e1f7c9eee7 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver")
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
When terminating for_each_compatible_node() iteration with
break or return, of_node_put() should be used to prevent
stale device node references from being left behind.
Found by Coccinelle.
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Subash reported that commit 42a7b32b73 ("xfrm: Add oif to dst lookups")
broke a wifi use case that uses fib rules and xfrms. The intent of
42a7b32b73 was driven by VRFs with IPsec. As a compromise relax the
use of oif in xfrm lookups to L3 master devices only (ie., oif is either
an L3 master device or is enslaved to a master device).
Fixes: 42a7b32b73 ("xfrm: Add oif to dst lookups")
Reported-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org>
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
MCE must not use PACA_EXGEN. When a general exception enables MSR_RI,
that means SPRN_SRR[01] and SPRN_SPRG are no longer used. However the
PACA save area is still in use.
Acked-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
When booting from an OpenFirmware which supports it, we use the
"ibm,client-architecture-support" firmware call to communicate
our capabilities to firmware.
The format of the structure we pass to firmware is specified in
PAPR (Power Architecture Platform Requirements), or the public version
LoPAPR (Linux on Power Architecture Platform Reference).
Referring to table 244 in LoPAPR v1.1, option vector 5 contains a 4 byte
field at bytes 17-20 for the "Platform Facilities Enable". This is
followed by a 1 byte field at byte 21 for "Sub-Processor Represenation
Level".
Comparing to the code, there we have the Platform Facilities
options (OV5_PFO_*) at byte 17, but we fail to pad that field out to its
full width of 4 bytes. This means the OV5_SUB_PROCESSORS option is
incorrectly placed at byte 18.
Fix it by adding zero bytes for bytes 18, 19, 20, and comment the bytes
to hopefully make it clearer in future.
As far as I'm aware nothing actually consumes this value at this time,
so the effect of this bug is nil in practice.
It does mean we've been incorrectly setting bit 15 of the "Platform
Facilities Enable" option for the past ~3 1/2 years, so we should avoid
allocating that bit to anything else in future.
Fixes: df77c79920 ("powerpc/pseries: Update ibm,architecture.vec for PAPR 2.7/POWER8")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
We observed a kernel oops when running a PPC guest with config NR_CPUS=4
and qemu option "-smp cores=1,threads=8":
[ 30.634781] Unable to handle kernel paging request for data at
address 0xc00000014192eb17
[ 30.636173] Faulting instruction address: 0xc00000000003e5cc
[ 30.637069] Oops: Kernel access of bad area, sig: 11 [#1]
[ 30.637877] SMP NR_CPUS=4 NUMA pSeries
[ 30.638471] Modules linked in:
[ 30.638949] CPU: 3 PID: 27 Comm: migration/3 Not tainted
4.7.0-07963-g9714b26 #1
[ 30.640059] task: c00000001e29c600 task.stack: c00000001e2a8000
[ 30.640956] NIP: c00000000003e5cc LR: c00000000003e550 CTR:
0000000000000000
[ 30.642001] REGS: c00000001e2ab8e0 TRAP: 0300 Not tainted
(4.7.0-07963-g9714b26)
[ 30.643139] MSR: 8000000102803033 <SF,VEC,VSX,FP,ME,IR,DR,RI,LE,TM[E]> CR: 22004084 XER: 00000000
[ 30.644583] CFAR: c000000000009e98 DAR: c00000014192eb17 DSISR: 40000000 SOFTE: 0
GPR00: c00000000140a6b8 c00000001e2abb60 c0000000016dd300 0000000000000003
GPR04: 0000000000000000 0000000000000004 c0000000016e5920 0000000000000008
GPR08: 0000000000000004 c00000014192eb17 0000000000000000 0000000000000020
GPR12: c00000000140a6c0 c00000000ffffc00 c0000000000d3ea8 c00000001e005680
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
GPR20: 0000000000000000 c00000001e6b3a00 0000000000000000 0000000000000001
GPR24: c00000001ff85138 c00000001ff85130 000000001eb6f000 0000000000000001
GPR28: 0000000000000000 c0000000017014e0 0000000000000000 0000000000000018
[ 30.653882] NIP [c00000000003e5cc] __cpu_disable+0xcc/0x190
[ 30.654713] LR [c00000000003e550] __cpu_disable+0x50/0x190
[ 30.655528] Call Trace:
[ 30.655893] [c00000001e2abb60] [c00000000003e550] __cpu_disable+0x50/0x190 (unreliable)
[ 30.657280] [c00000001e2abbb0] [c0000000000aca0c] take_cpu_down+0x5c/0x100
[ 30.658365] [c00000001e2abc10] [c000000000163918] multi_cpu_stop+0x1a8/0x1e0
[ 30.659617] [c00000001e2abc60] [c000000000163cc0] cpu_stopper_thread+0xf0/0x1d0
[ 30.660737] [c00000001e2abd20] [c0000000000d8d70] smpboot_thread_fn+0x290/0x2a0
[ 30.661879] [c00000001e2abd80] [c0000000000d3fa8] kthread+0x108/0x130
[ 30.662876] [c00000001e2abe30] [c000000000009968] ret_from_kernel_thread+0x5c/0x74
[ 30.664017] Instruction dump:
[ 30.664477] 7bde1f24 38a00000 787f1f24 3b600001 39890008 7d204b78 7d05e214 7d0b07b4
[ 30.665642] 796b1f24 7d26582a 7d204a14 7d29f214 <7d4048a8> 7d4a3878 7d4049ad 40c2fff4
[ 30.666854] ---[ end trace 32643b7195717741 ]---
The reason of this is that in __cpu_disable(), when we try to set the
cpu_sibling_mask or cpu_core_mask of the sibling CPUs of the disabled
one, we don't check whether the current configuration employs those
sibling CPUs(hw threads). And if a CPU is not employed by a
configuration, the percpu structures cpu_{sibling,core}_mask are not
allocated, therefore accessing those cpumasks will result in problems as
above.
This patch fixes this problem by adding an addition check on whether the
id is no less than nr_cpu_ids in the sibling CPU iteration code.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
These files were only including module.h for exception table
related functions. We've now separated that content out into its
own file "extable.h" so now move over to that and avoid all the
extra header content in module.h that we don't really need to compile
these files.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Unsigned type is always non-negative, so the loop could not end in case
condition is never true.
The problem has been detected using semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
This patch leverages 'struct pci_host_bridge' from the PCI subsystem
in order to free the pci_controller only after the last reference to
its devices is dropped (avoiding an oops in pcibios_release_device()
if the last reference is dropped after pcibios_free_controller()).
The patch relies on pci_host_bridge.release_fn() (and .release_data),
which is called automatically by the PCI subsystem when the root bus
is released (i.e., the last reference is dropped). Those fields are
set via pci_set_host_bridge_release() (e.g. in the platform-specific
implementation of pcibios_root_bridge_prepare()).
It introduces the 'pcibios_free_controller_deferred()' .release_fn()
and it expects .release_data to hold a pointer to the pci_controller.
The function implictly calls 'pcibios_free_controller()', so an user
must *NOT* explicitly call it if using the new _deferred() callback.
The functionality is enabled for pseries (although it isn't platform
specific, and may be used by cxl).
Details on not-so-elegant design choices:
- Use 'pci_host_bridge.release_data' field as pointer to associated
'struct pci_controller' so *not* to 'pci_bus_to_host(bridge->bus)'
in pcibios_free_controller_deferred().
That's because pci_remove_root_bus() sets 'host_bridge->bus = NULL'
(so, if the last reference is released after pci_remove_root_bus()
runs, which eventually reaches pcibios_free_controller_deferred(),
that would hit a null pointer dereference).
The cxl/vphb.c code calls pci_remove_root_bus(), and the cxl folks
are interested in this fix.
Test-case #1 (hold references)
# ls -ld /sys/block/sd* | grep -m1 0021:01:00.0
<...> /sys/block/sdaa -> ../devices/pci0021:01/0021:01:00.0/<...>
# ls -ld /sys/block/sd* | grep -m1 0021:01:00.1
<...> /sys/block/sdab -> ../devices/pci0021:01/0021:01:00.1/<...>
# cat >/dev/sdaa & pid1=$!
# cat >/dev/sdab & pid2=$!
# drmgr -w 5 -d 1 -c phb -s 'PHB 33' -r
Validating PHB DLPAR capability...yes.
[ 594.306719] pci_hp_remove_devices: PCI: Removing devices on bus 0021:01
[ 594.306738] pci_hp_remove_devices: Removing 0021:01:00.0...
...
[ 598.236381] pci_hp_remove_devices: Removing 0021:01:00.1...
...
[ 611.972077] pci_bus 0021:01: busn_res: [bus 01-ff] is released
[ 611.972140] rpadlpar_io: slot PHB 33 removed
# kill -9 $pid1
# kill -9 $pid2
[ 632.918088] pcibios_free_controller_deferred: domain 33, dynamic 1
Test-case #2 (don't hold references)
# drmgr -w 5 -d 1 -c phb -s 'PHB 33' -r
Validating PHB DLPAR capability...yes.
[ 916.357363] pci_hp_remove_devices: PCI: Removing devices on bus 0021:01
[ 916.357386] pci_hp_remove_devices: Removing 0021:01:00.0...
...
[ 920.566527] pci_hp_remove_devices: Removing 0021:01:00.1...
...
[ 933.955873] pci_bus 0021:01: busn_res: [bus 01-ff] is released
[ 933.955977] pcibios_free_controller_deferred: domain 33, dynamic 1
[ 933.955999] rpadlpar_io: slot PHB 33 removed
Suggested-By: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Tested-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> # cxl
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
When cxl removes a vPHB, it's possible that the pci_controller may be freed
before all references to the devices on the vPHB have been released. This
in turn causes an invalid memory access when the devices are eventually
released, as pcibios_release_device() attempts to call the phb's
release_device hook.
In cxl_pci_vphb_remove(), remove the existing call to
pcibios_free_controller(). Instead, use
pcibios_free_controller_deferred() to free the pci_controller after all
devices have been released. Export pci_set_host_bridge_release() so we can
do this.
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The field "owner" is set by the core.
Thus delete an unneeded initialisation.
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The field "owner" is set by the core.
Thus delete an unneeded initialisation.
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
The field "owner" is set by core. Thus delete an extra initialisation.
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Powerpc builds may fail with the following build error.
Error log:
In file included from ./arch/powerpc/include/asm/mmu_context.h:11:0,
from ./include/linux/mmu_context.h:4,
from mm/mmu_context.c:8:
./arch/powerpc/include/asm/cputhreads.h: In function 'get_tensr':
./arch/powerpc/include/asm/cputhreads.h:101:2: error:
implicit declaration of function 'cpu_has_feature'
The problem can be triggered by configuring ppc64e_defconfig and selecting
CONFIG_TICK_CPU_ACCOUNTING instead of CONFIG_VIRT_CPU_ACCOUNTING_NATIVE.
Fixes: b92a226e52 ("powerpc: Move cpu_has_feature() to a separate file")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Pull two parisc fixes from Helge Deller:
"The first patch ensures that the high-res cr16 clocksource (which was
added in kernel 4.7) gets choosen as default clocksource for parisc.
The second patch moves the #define of EREFUSED down inside errno.h and
thus unbreaks building the gccgo compiler"
* 'parisc-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix order of EREFUSED define in errno.h
parisc: Fix automatic selection of cr16 clocksource
Any readings from the raw interface of the KXSD9 driver will
return an empty string, because it does not return
IIO_VAL_INT but rather some random value from the accelerometer
to the caller.
Cc: stable@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Now that open delay and sample delay for each channel is configurable
via DT, the default IDLE_TIMEOUT value is not enough as this is
calculated based on hardcoded macros. This results in driver returning
EBUSY sometimes. Fix this by increasing the timeout
value based on maximum value possible to open delay and sample delays
for each channel.
Fixes: 5dc11e8106 ("iio: adc: ti_am335x_adc: make sample delay, open delay, averaging DT parameters")
Signed-off-by: Vignesh R <vigneshr@ti.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
It is possible that two or more ADC channels can be simultaneously
requested for raw samples, in which case there can be race in access to
FIFO data resulting in loss of samples.
If am335x_tsc_se_set_once() is called again from tiadc_read_raw(), when
ADC is still acquired to sample one of the channels, the second process
might be put into uninterruptible sleep state. Fix these issues, by
protecting FIFO access and channel configurations with a mutex. Since
tiadc_read_raw() might take anywhere between few microseconds to few
milliseconds to finish execution (depending on averaging and delay
values supplied via DT), its better to use mutex instead of spinlock.
Fixes: 7ca6740cd1 ("mfd: input: iio: ti_amm335x: Rework TSC/ADC synchronization")
Signed-off-by: Vignesh R <vigneshr@ti.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This is an entirely new driver instead of yet another set of patches
to sb_edac.c because:
1) Mapping from PCI devices to socket/memory controller is significantly
different. Skylake scatters devices on a socket across a number of
PCI buses.
2) There is an extra level of interleaving via the "mcroute" register
that would be a little messy to squeeze into the old driver.
3) Validation is getting too expensive. Changes to sb_edac need to
be checked against Sandy Bridge, Ivy Bridge, Haswell, Broadwell and
Knights Landing.
Acked-by: Aristeu Rozanski <aris@redhat.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix excess fields in kernel-doc notation in <linux/fence.h>
after some struct fields were removed.
Fixes these kernel-doc warnings:
..//include/linux/fence.h:85: warning: Excess struct/union/enum/typedef member 'child_list' description in 'fence'
..//include/linux/fence.h:85: warning: Excess struct/union/enum/typedef member 'active_list' description in 'fence'
Fixes: 0431b9065f ("staging/android: bring struct sync_pt back")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Luis de Bethencourt <luisbg@osg.samsung.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current check for associatedsta being set to -1 to indicate it has
not been found is not working because associatedsta is initialized to
zero and will never be -1. Fix this by initializing it to ~0 and checking
for ~0 instead.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix incorrect usage of completion interface by replacing
'wait_for_completion' with 'complete'. This error was introduced
accidentally while replacing semaphores with mutexes.
Reported-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix an incorrect assignment due to a typo on a variable name. The
variable val2 should be assigned 100000 and not val.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-By: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
When using CONFIG_DEBUG_ATOMIC_SLEEP, the scheduler nicely points out
that we're calling sleeping primitives within the wait_event loop, which
means we might clobber the task state:
[ 10.831289] do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffc00026b610>]
[ 10.845531] ------------[ cut here ]------------
[ 10.850161] WARNING: at kernel/sched/core.c:7630
...
[ 12.164333] ---[ end trace 45409966a9a76438 ]---
[ 12.168942] Call trace:
[ 12.171391] [<ffffffc00024ed44>] __might_sleep+0x64/0x90
[ 12.176699] [<ffffffc000954774>] mutex_lock_nested+0x50/0x3fc
[ 12.182440] [<ffffffc0007b9424>] iio_kfifo_buf_data_available+0x28/0x4c
[ 12.189043] [<ffffffc0007b76ac>] iio_buffer_ready+0x60/0xe0
[ 12.194608] [<ffffffc0007b7834>] iio_buffer_read_first_n_outer+0x108/0x1a8
[ 12.201474] [<ffffffc000370d48>] __vfs_read+0x58/0x114
[ 12.206606] [<ffffffc000371740>] vfs_read+0x94/0x118
[ 12.211564] [<ffffffc0003720f8>] SyS_read+0x64/0xb4
[ 12.216436] [<ffffffc000203cb4>] el0_svc_naked+0x24/0x28
To avoid this, we should (a la https://lwn.net/Articles/628628/) use the
wait_woken() function, which avoids the nested sleeping while still
handling races between waiting / wake-events.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <Stable@vger.kernel.org> # 3.19+ for introduction of wake_woken
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Commit ebb657babf ("staging: comedi: ni_mio_common: clarify the
cmd->start_arg validation and use") introduced a backwards compatibility
issue in the use of asynchronous commands on the AO subdevice when
`start_src` is `TRIG_EXT`. Valid values for `start_src` are `TRIG_INT`
(for internal, software trigger), and `TRIG_EXT` (for external trigger).
When set to `TRIG_EXT`. In both cases, the driver relies on an
internal, software trigger to set things up (allowing the user
application to write sufficient samples to the data buffer before the
trigger), so it acts as a software "pre-trigger" in the `TRIG_EXT` case.
The software trigger is handled by `ni_ao_inttrig()`.
Prior to the above change, when `start_src` was `TRIG_INT`, `start_arg`
was required to be 0, and `ni_ao_inttrig()` checked that the software
trigger number was also 0. After the above change, when `start_src` was
`TRIG_INT`, any value was allowed for `start_arg`, and `ni_ao_inttrig()`
checked that the software trigger number matched this `start_arg` value.
The backwards compatibility issue is that the internal trigger number
now has to match `start_arg` when `start_src` is `TRIG_EXT` when it
previously had to be 0.
Fix the backwards compatibility issue in `ni_ao_inttrig()` by always
allowing software trigger number 0 when `start_src` is something other
than `TRIG_INT`.
Thanks to Spencer Olson for reporting the issue.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reported-by: Spencer Olson <olsonse@umich.edu>
Fixes: ebb657babf ("staging: comedi: ni_mio_common: clarify the cmd->start_arg validation and use")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bitwise | has higher precedence than ?: so we need to add some
parenthesis for this to work as intended.
Fixes: 7c9574090d ('staging: comedi: dt2811: simplify A/D reference configuration')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The CMDF_ROUND_DOWN case falls through and so always returns -EINVAL.
Fixes: 14b93bb6bb ("staging: comedi: adv_pci_dio: separate out PCI-1760 support")
Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For counter subdevices, the `s->insn_write` handler is being set to the
wrong function, `ni_tio_insn_read()`. It should be
`ni_tio_insn_write()`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Reported-by: Éric Piel <piel@delmic.com>
Fixes: 10f74377ee ("staging: comedi: ni_tio: make ni_tio_winsn() a
proper comedi (*insn_write)"
Cc: <stable@vger.kernel.org> # 3.17+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 73e0e4dfed ("staging: comedi: comedi_test: fix timer lock-up")
fixed a lock-up in the timer routine `waveform_ai_timer()` (which was
called `waveform_ai_interrupt()` at the time) caused by
commit 2405124744 ("staging: comedi: comedi_test: use
comedi_handle_events()"). However, it introduced a race condition that
can result in the timer routine misbehaving, such as accessing freed
memory or dereferencing a NULL pointer.
73e0... changed the timer routine to do nothing unless a
`WAVEFORM_AI_RUNNING` flag was set, and changed `waveform_ai_cancel()`
to clear the flag and replace a call to `del_timer_sync()` with a call
to `del_timer()`. `waveform_ai_cancel()` may be called from the timer
routine itself (via `comedi_handle_events()`), or from `do_cancel()`.
(`do_cancel()` is called as a result of a file operation (usually a
`COMEDI_CANCEL` ioctl command, or a release), or during device removal.)
When called from `do_cancel()`, the call to `waveform_ai_cancel()` is
followed by a call to `do_become_nonbusy()`, which frees up stuff for
the current asynchronous command under the assumption that it is now
safe to do so. The race condition occurs when the timer routine
`waveform_ai_timer()` checks the `WAVEFORM_AI_RUNNING` flag just before
it is cleared by `waveform_ai_cancel()`, and is still running during the
call to `do_become_nonbusy()`. In particular, it can lead to a NULL
pointer dereference:
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffffc0c63add>] waveform_ai_timer+0x17d/0x290 [comedi_test]
That corresponds to this line in `waveform_ai_timer()`:
unsigned int chanspec = cmd->chanlist[async->cur_chan];
but `do_become_nonbusy()` frees `cmd->chanlist` and sets it to `NULL`.
Fix the race by calling `del_timer_sync()` instead of `del_timer()` in
`waveform_ai_cancel()` when not in an interrupt context. The only time
`waveform_ai_cancel()` is called in an interrupt context is when it is
called from the timer routine itself, via `comedi_handle_events()`.
There is no longer any need for the `WAVEFORM_AI_RUNNING` flag, so get
rid of it.
The bug was copied from the AI subdevice to the AO when support for
commands on the AO subdevice was added by commit 0cf55bbef2 ("staging:
comedi: comedi_test: implement commands on AO subdevice"). That
involves the timer routine `waveform_ao_timer()`, the comedi "cancel"
routine `waveform_ao_cancel()`, and the flag `WAVEFORM_AO_RUNNING`. Fix
it in the same way as for the AI subdevice.
Fixes: 73e0e4dfed ("staging: comedi: comedi_test: fix timer lock-up")
Fixes: 0cf55bbef2 ("staging: comedi: comedi_test: implement commands
on AO subdevice")
Reported-by: Éric Piel <piel@delmic.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: <stable@vger.kernel.org> # 4.4+
Cc: Éric Piel <piel@delmic.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`daqboard2000_find_boardinfo()` is supposed to check if the
DaqBoard/2000 series model is supported, based on the PCI subvendor and
subdevice ID. The current code is wrong as it is comparing the PCI
device's subdevice ID to an expected, fixed value for the subvendor ID.
It should be comparing the PCI device's subvendor ID to this fixed
value. Correct it.
Fixes: 7e8401b23e ("staging: comedi: daqboard2000: add back
subsystem_device check")
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Cc: <stable@vger.kernel.org> # 3.7+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The call to i2c_get_clientdata(client) returns a struct iio_dev*, not
the needed struct ads1015_data*. We need here an intermediate step as
in the function: void ads1015_get_channels_config(struct i2c_client *client).
Signed-off-by: Giorgio Dal Molin <giorgio.nicole@arcor.de>
Fixes: ecc24e72f4 ("iio: adc: Add TI ADS1015 ADC driver support")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
If the address configured in the device tree is invalid, the
driver will fallback to using a random address from the locally
administered range.
Signed-off-by: Daniel Romell <daro@hms.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
When building gccgo in userspace, errno.h gets parsed and the go include file
sysinfo.go is generated.
Since EREFUSED is defined to the same value as ECONNREFUSED, and ECONNREFUSED
is defined later on in errno.h, this leads to go complaining that EREFUSED
isn't defined yet.
Fix this trivial problem by moving the define of EREFUSED down after
ECONNREFUSED in errno.h (and clean up the indenting while touching this line).
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Commit 54b6680090 (parisc: Add native high-resolution sched_clock()
implementation) added support to use the CPU-internal cr16 counters as reliable
clocksource with the help of HAVE_UNSTABLE_SCHED_CLOCK.
Sadly the commit missed to remove the hack which prevented cr16 to become the
default clocksource even on SMP systems.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 4.7+
'Commit 3c8b3efc06 ("vmxnet3: allow variable length transmit data ring
buffer")' changed the size of the buffers in the tx data ring from a
fixed size of 128 bytes to a variable size.
However, while copying data to the data ring, vmxnet3_copy_hdr continues
to carry the old code that assumes fixed buffer size of 128. This patch
fixes it by adding correct offset based on the actual data ring buffer
size.
Signed-off-by: Guolin Yang <gyang@vmware.com>
Signed-off-by: Shrikrishna Khare <skhare@vmware.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The RAR entry for the SAN MAC address was being cleared when we were
clearing the VMDq pool bits. In order to prevent this we need to add
an extra check to protect the SAN MAC from being cleared.
Fixes: 6e982aeae ("ixgbe: Clear stale pool mappings")
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We'd end up NULL pointer dereferencing because we didn't take the
error path out in the parent. Fixes igt vc4_lookup_fail test.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: d5b1a78a77 ("drm/vc4: Add support for drawing 3D frames.")
Cc: stable@vger.kernel.org
Overflow memory handling is tricky: While it's still referenced by the
BPO registers, we want to keep it from being freed. When we are
putting a new set of overflow memory in the registers, we need to
assign the old one to the last rendering job using it.
We were looking at "what's currently running in the binner", but since
the bin/render submission split, we may end up with the binner
completing and having no new job while the renderer is still
processing. So, if we don't find a bin job at all, look at the
highest-seqno (last) render job to attach our overflow to.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: ca26d28bba ("drm/vc4: improve throughput by pipelining binning and rendering jobs")
Cc: stable@vger.kernel.org
The BO cache will complain if BOs are still allocated when we try to
destroy it (since freeing those BOs would try to hit the cache). You
could hit this if you were to unload the module after a GPU hang.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 214613656b ("drm/vc4: Add an interface for capturing the GPU state after a hang.")
If the device was already up, a 1 is returned instead of 0. We were
erroring out, leading the 3D driver to sometimes fail at screen
initialization (generally with ENOENT returned to it).
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: af713795c5 ("drm/vc4: Add a getparam ioctl for getting the V3D identity regs.")
If you exceeded the size that kmalloc would return, you'd get a dmesg
warning and a return from the job submit. We can handle much
allocations with vmalloc, and drm_malloc_ab makes that decision.
Fixes failure in piglit's scissor-many.
Signed-off-by: Eric Anholt <eric@anholt.net>
If you managed to exceed the limit to switch to vmalloc, we'd use the
wrong free.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: d5b1a78a77 ("drm/vc4: Add support for drawing 3D frames.")
Cc: stable@vger.kernel.org
Pool index has to be converted by get_pool helper to work correctly for
egress pool. In mlxsw the egress pool index starts from 0.
Fixes: 0f433fa0ec ("mlxsw: spectrum_buffers: Implement shared buffer configuration")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sk->sk_state is bits flag, so need use bit operation check
instead of value check.
Signed-off-by: Gao Feng <fgao@ikuai8.com>
Tested-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Saeed Mahameed says:
====================
Mellanox 100G mlx5 fixes 2016-08-16
This series includes some bug fixes for mlx5e driver.
From Saeed and Tariq, Optimize MTU change to not reset when it is not required.
From Paul, Command interface message length check to speedup firmware
command preparation.
From Mohamad, Save pci state when pci error is detected.
From Amir, Flow counters "lastuse" update fix.
From Hadar, Use correct flow dissector key on flower offloading.
Plus a small optimization for switchdev hardware id query.
From Or, three patches to address some E-Switch offloads issues.
For -stable of 4.6.y and 4.7.y:
net/mlx5e: Use correct flow dissector key on flower offloading
net/mlx5: Fix pci error recovery flow
net/mlx5: Added missing check of msg length in verifying its signature
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When we are in the switchdev/offloads mode, HW matching is done as
dictated by the offloaded rules and hence we don't need to enable
the ACLs mechanism used by the legacy mode.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While adding actual offloading support to the new switchdev mode, we didn't
change the setup of the send-to-vport rules to put them in the slow path
table, fix that.
Fixes: 1033665e63 ('net/mlx5: E-Switch, Use two priorities for SRIOV offloads mode')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since mlx5 has also the NONE e-switch mode, we must translate from mlx5
mode to devlink mode on the devlink eswitch mode get call, do that.
While here, remove the mlx5_ prefix from the static function helpers
that deal with the mode to comply with the rest of the code.
Fixes: c930a3ad74 ('net/mlx5e: Add devlink based SRIOV mode change')
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid firmware command execution each time the switchdev HW ID attr get
call is made. We do that by reading the ID (PF NIC MAC) only once at
load time and store it on the representor structure.
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The wrong key is used when extracting the address type field set by
the flower offload code. We have to use the control key and not the
basic key, fix that.
Fixes: e3a2b7ed01 ('net/mlx5e: Support offload cls_flower with drop action')
Signed-off-by: Hadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set lastuse statistic, when number of packets is changed compared to
last query. This was wrongly dropped when bulk counter reading was added.
Fixes: a351a1b03b ('net/mlx5: Introduce bulk reading of flow counters')
Signed-off-by: Amir Vadai <amirva@mellanox.com>
Reported-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set and verify signature calculates the signature for each of the
mailbox nodes, even for those that are unused (from cache). Added
a missing length check to set and verify only those which are used.
While here, also moved the setting of msg's nodes token to where we
already go over them. This saves a pass because checksum is disabled,
and the only useful thing remaining that set signature does is setting
the token.
Fixes: e126ba97db ('mlx5: Add driver for Mellanox Connect-IB
adapters')
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When PCI error is detected we should save the state of the pci prior to
disabling it.
Also when receiving pci slot reset call we need to verify that the
device is responsive.
Fixes: 89d44f0a6c ('net/mlx5_core: Add pci error handlers to mlx5_core
driver')
Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid unnecessary interface down/up operations upon an MTU change
when it does not affect the rings configuration.
Fixes: 461017cb00 ("net/mlx5e: Support RX multi-packet WQE (Striding RQ)")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Port mtu shouldn't be written to hardware on every single interface
open.
Here we set it only when needed, on change_mtu and netdevice creation.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric writes:
Please pull this bcache branch based on v4.8-rc2. These fix one
deadlock, one use blkdev_put() use counter, and one dmesg output with a
better pr_err() description.
The kernel test robot reported a usercopy failure in the new hardened
sanity checks, due to a page-crossing copy of the FPU state into the
task structure.
This happened because the kernel test robot was testing with SLOB, which
doesn't actually do the required book-keeping for slab allocations, and
as a result the hardening code didn't realize that the task struct
allocation was one single allocation - and the sanity checks fail.
Since SLOB doesn't even claim to support hardening (and you really
shouldn't use it), the straightforward solution is to just make the
usercopy hardening code depend on the allocator supporting it.
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull i2c fixes from Wolfram Sang:
"I2C has some pretty standard driver bugfixes and one minor cleanup"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: meson: Use complete() instead of complete_all()
i2c: brcmstb: Use complete() instead of complete_all()
i2c: bcm-kona: Use complete() instead of complete_all()
i2c: bcm-iproc: Use complete() instead of complete_all()
i2c: at91: fix support of the "alternative command" feature
i2c: ocores: add missed clk_disable_unprepare() on failure paths
i2c: cros-ec-tunnel: Fix usage of cros_ec_cmd_xfer()
i2c: mux: demux-pinctrl: properly roll back when adding adapter fails
| CC mm/memory.o
| In file included from ../mm/memory.c:53:0:
| ../include/linux/pfn_t.h: In function ‘pfn_t_pte’:
| ../include/linux/pfn_t.h:78:2: error: conversion to non-scalar type requested
| return pfn_pte(pfn_t_to_pfn(pfn), pgprot);
With STRICT_MM_TYPECHECKS pte_t is a struct and the offending code
forces a cast which ends up shifting a struct and hence the gcc warning.
Note that in recent past some of the arches (aarch64, s390) made
STRICT_MM_TYPECHECKS default, but we don't for ARC as this leads to slightly
worse generated code, given ARC ABI definition of returning structs
(which pte_t would become)
Quoting from ARC ABI...
"Results of type struct are returned in a caller-supplied temporary
variable whose address is passed in r0.
For such functions, the arguments are shifted so that they are
passed in r1 and up."
So
- struct to be returned would be allocated on stack requiring extra
code at call sites
- callee updates stack memory to facilitate the return (vs. simple
MOV into return reg r0)
Hence STRICT_MM_TYPECHECKS is not enabled by default for ARC
Cc: <stable@vger.kernel.org> #4.4+
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
The syscall ABI includes the gcc functional calling ABI since a syscall
implies userland caller and kernel callee.
The current gcc ABI (v3) for ARCv2 ISA required 64-bit data be passed in
even-odd register pairs, (potentially punching reg holes when passing such
values as args). This was partly driven by the fact that the double-word
LDD/STD instructions in ARCv2 expect the register alignment and thus gcc
forcing this avoids extra MOV at the cost of a few unused register (which we
have plenty anyways).
This however was rejected as part of upstreaming gcc port to HS. So the new
ABI v4 doesn't enforce the even-odd reg restriction.
Do note that for ARCompact ISA builds v3 and v4 are practically the same in
terms of gcc code generation.
In terms of change management, we infer the new ABI if gcc 6.x onwards
is used for building the kernel.
This also needs a stable backport to enable older kernels to work with
new tools/user-space
Cc: <stable@vger.kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
User mode callee regs are explicitly collected before signal delivery or
breakpoint trap. r25 is special for kernel as it serves as task pointer,
so user mode value is clobbered very early. It is saved in pt_regs where
generally only scratch (aka caller saved) regs are saved.
The code to access the corresponding pt_regs location had a subtle bug as
it was using load/store with scaling of offset, whereas the offset was already
byte wise correct. So fix this by replacing LD.AS with a standard LD
Cc: <stable@vger.kernel.org>
Signed-off-by: Liav Rehana <liavr@mellanox.com>
Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com>
[vgupta: rewrote title and commit log]
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
The commit 4097461897 ("Input: i8042 - break load dependency ...")
correctly set up ps2_cmd_mutex pointer for the KBD port but forgot to do
the same for AUX port(s), which results in communication on KBD and AUX
ports to clash with each other.
Fixes: 4097461897 ("Input: i8042 - break load dependency ...")
Reported-by: Bruno Wolff III <bruno@wolff.to>
Tested-by: Bruno Wolff III <bruno@wolff.to>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Konrad writes:
Please git pull the following three fixes in to your 'for-linus' branch.
It is against 'for-linus' instead of 'for-4.8/drivers' because we had
some code in xen-blkfront go through the Xen tree (with your Ack). The
reason was that you 'for-4.8/drivers' was based on 4.7-rc2, and the
fixes needed to be against newer tag.
This branch fixes as we are exercising the multiqueue components more
aggressively.
Pull device mapper fixes from Mike Snitzer:
- a stable fix for DM round robin multipath path selector to disable
preemption before using this_cpu_ptr()
- a slight increase in DM crypt's mempool reserves to make swap ontop
of DM crypt more performant
- a few DM raid fixes to issues found while testing changes that were
merged in v4.8-rc1
* tag 'dm-4.8-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm raid: support raid0 with missing metadata devices
dm raid: enhance attempt_restore_of_faulty_devices() to support more devices
dm raid: fix restoring of failed devices regression
dm raid: fix frozen recovery regression
dm crypt: increase mempool reserve to better support swapping
dm round robin: do not use this_cpu_ptr() without having preemption disabled
Current code forgets to free resources in the failure path of
xlvbd_alloc_gendisk(), this patch fix it.
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
blk_mq_update_nr_hw_queues() reset all queue limits to default which it's
not as xen-blkfront expected, introducing blkif_set_queue_limits() to reset
limits with initial correct values.
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Two places didn't get updated when 64KB page granularity was introduced,
this patch fix them.
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Pull SCSI fixes from James Bottomley:
"Six fairly small fixes. The ipr, mpt3sas and ses ones all trigger
oopses. The megaraid one fixes an attach failure on io mapped only
cards, the fcoe one is an obvious problem in the error path and the
aacraid one is a theoretical security issue (ability to trick the
kernel into a buffer overrun)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
ses: Fix racy cleanup of /sys in remove_dev()
mpt3sas: Fix resume on WarpDrive flash cards
ipr: Fix sync scsi scan
megaraid_sas: Fix probing cards without io port
aacraid: Check size values after double-fetch from user
fcoe: Use kfree_skb() instead of kfree()
Pull USB fixes from Greg KH:
"Here are a number of USB fixes for reported issues for your tree.
The normal amount of gadget fixes, xhci fixes, new device ids, and a
few other minor things. All of them have been in linux-next for a
while, the full details are in the shortlog below"
* tag 'usb-4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (43 commits)
xhci: don't dereference a xhci member after removing xhci
usb: xhci: Fix panic if disconnect
xhci: really enqueue zero length TRBs.
xhci: always handle "Command Ring Stopped" events
cdc-acm: fix wrong pipe type on rx interrupt xfers
usb: misc: usbtest: add fix for driver hang
usb: dwc3: gadget: stop processing on HWO set
usb: dwc3: don't set last bit for ISOC endpoints
usb: gadget: rndis: free response queue during REMOTE_NDIS_RESET_MSG
usb: udc: core: fix error handling
usb: gadget: fsl_qe_udc: off by one in setup_received_handle()
usb/gadget: fix gadgetfs aio support.
usb: gadget: composite: Fix return value in case of error
usb: gadget: uvc: Fix return value in case of error
usb: gadget: fix check in sync read from ep in gadgetfs
usb: misc: usbtest: usbtest_do_ioctl may return positive integer
usb: dwc3: fix missing platform_set_drvdata() in dwc3_of_simple_probe()
usb: phy: omap-otg: Fix missing platform_set_drvdata() in omap_otg_probe()
usb: gadget: configfs: add mutex lock before unregister gadget
usb: gadget: u_ether: fix dereference after null check coverify warning
...
Pull xfs and iomap fixes from Dave Chinner:
"Changes in this update:
Regression fixes for XFS changes introduce in 4.8-rc1:
- buffer IO accounting assert failure
- ENOSPC block accounting reservation issue
- DAX IO path page cache invalidation fix
- rmapbt on-disk block count in agf
- correct classification of rmap block type when updating AGFL.
- iomap support for attribute fork mapping
Regression fixes for iomap infrastructure in 4.8-rc1:
- fiemap: honor FIEMAP_FLAG_SYNC
- fiemap: implement FIEMAP_FLAG_XATTR support to fix XFS regression
- make mark_page_accessed and pagefault_disable usage consistent with
other IO paths"
* tag 'xfs-iomap-for-linus-4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
xfs: remove OWN_AG rmap when allocating a block from the AGFL
xfs: (re-)implement FIEMAP_FLAG_XATTR
xfs: simplify xfs_file_iomap_begin
iomap: mark ->iomap_end as optional
iomap: prepare iomap_fiemap for attribute mappings
iomap: fiemap should honor the FIEMAP_FLAG_SYNC flag
iomap: remove superflous pagefault_disable from iomap_write_actor
iomap: remove superflous mark_page_accessed from iomap_write_actor
xfs: store rmapbt block count in the AGF
xfs: don't invalidate whole file on DAX read/write
xfs: fix bogus space reservation in xfs_iomap_write_allocate
xfs: don't assert fail on non-async buffers on ioacct decrement
Pull hwmon fixes from Guenter Roeck:
"Fix a bug in it87 driver and URLs in ftsteutates driver"
* tag 'hwmon-for-linus-v4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (ftsteutates) Correct ftp urls in driver documentation
hwmon: (it87) Features mask must be 32 bit wide
When mapping a page into the guest we error check using is_error_pfn(),
however this doesn't detect a value of KVM_PFN_NOSLOT, indicating an
error HVA for the page. This can only happen on MIPS right now due to
unusual memslot management (e.g. being moved / removed / resized), or
with an Enhanced Virtual Memory (EVA) configuration where the default
KVM_HVA_ERR_* and kvm_is_error_hva() definitions are unsuitable (fixed
in a later patch). This case will be treated as a pfn of zero, mapping
the first page of physical memory into the guest.
It would appear the MIPS KVM port wasn't updated prior to being merged
(in v3.10) to take commit 81c52c56e2 ("KVM: do not treat noslot pfn as
a error pfn") into account (merged v3.8), which converted a bunch of
is_error_pfn() calls to is_error_noslot_pfn(). Switch to using
is_error_noslot_pfn() instead to catch this case properly.
Fixes: 858dd5d457 ("KVM/MIPS32: MMU/TLB operations for the Guest.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Cc: <stable@vger.kernel.org> # 3.10.y-
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The dmic-codec was registered within the platform_driver's probe function,
which can cause deferred probe to run in loops as reported and analyzed by
Russell King.
Use module_init/exit in the driver and handle the dmic-codec device
registration and removal at that level instead of the platform_driver
probe/remove.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Tested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
of_match_device could return NULL, and so cause a NULL pointer
dereference later at line 472:
data->socdata = of_id->data;
For fixing this problem, we use of_device_get_match_data(), this will
simplify the code a little by using a standard function for
getting the match data.
Reported-by: coverity (CID 1324128)
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
The field "owner" is set by core. Thus delete an extra initialisation.
Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Currently all CPU cooling devices share a
`struct thermal_cooling_device_ops` instance. The thermal core uses the
presence of functions in this struct to determine if a cooling device
has a power model (see cdev_is_power_actor). cpu_cooling.c adds the
power model functions to the shared struct when a device is registered
with a power model.
Therefore, if a CPU cooling device is registered using
[of_]cpufreq_power_cooling_register, _all_ devices will be determined to
have a power model, including any registered with
[of_]cpufreq_cooling_register. This can result in cpufreq_state2power
being called on a device where dyn_power_table is NULL.
With this commit, instead of having a shared thermal_cooling_device_ops
which is mutated, we have two versions: one with the power functions and
one without.
Signed-off-by: Brendan Jackman <brendan.jackman@arm.com>
Cc: Amit Daniel Kachhap <amit.kachhap@gmail.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Javi Merino <javi.merino@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
The drivers that depend on OF but not OF_GPIO are wreaking havoc
with the autobuilders for archs that have all requirements for
OF but not for OF_GPIO, particularly the UM (Usermode) arch does
not have iomem (NO_IOMEM) which result in configuring GPIOLIB but
without OF_GPIO which is wrong if the driver is using the .of_node
of the gpiochip, which only appears with OF_GPIO.
After a brief look at the drivers just depending on OF it seems
most if not all of them actually require stuff from gpiolib-of so
the dependency is wrong in the first place.
This simply patches the Kconfig so that all GPIO drivers using OF
depend on OF_GPIO rather than just OF.
Cc: Rabin Vincent <rabin@rab.in>
Cc: Pramod Gurav <pramod.gurav@smartplayin.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Cc: Alexandre Courbot <acourbot@nvidia.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Phil Reid <preid@electromag.com.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The UserMode (UM) Linux build was failing in gpiolib-of as it requires
ioremap()/iounmap() to exist, which is absent from UM. The non-existence
of IO memory is negatively defined as CONFIG_NO_IOMEM which means we
need to depend on HAS_IOMEM.
Cc: stable@vger.kernel.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Without this we'll get a use after free after connecting two controller
using the same hostnqn and then disconnecting one of them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
In a very tight timeframe, the debug message in the transfer completion
handler can be misleading, as the completion test report can change just
after the message, and the code flow cannot be deduced from the debug
message.
This is just a cleanup to make debugging easier.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Both the card and DAPM cleanups recursively delete their debugfs
directories. Since the DAPM debugfs subdirectory for the card is
located within the card debugfs this means we end up trying to double
free the DAPM subdirectory. Reorder the cleanup to free the card
debugfs after we've cleaned up DAPM and it has deleted its own
subdirectory.
Reported-by: Russell King - ARM Linux <linux@armlinux.org.uk>
Tested-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
NVM Express 1.2.1 section 7.9, NVMe Qualified Names, specifies that the
UUID format of NQN uses a UUID based on RFC 4122.
RFC 4122 specifies that the UUID is encoded in big-endian byte order.
Switch the NVMe over Fabrics host ID field from little-endian UUID to
big-endian UUID to match the specification.
Signed-off-by: Daniel Verkamp <daniel.verkamp@intel.com>
Reviewed-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
The disable_bypass cmdline option changes the SMMUv3 driver to put down
faulting stream table entries by default, as opposed to bypassing
transactions from unconfigured devices.
In this mode of operation, it is entirely expected to see aborting
entries in the stream table if and when we come to installing a valid
translation, so don't trigger a BUG() as a result of misdiagnosing these
entries as stream table corruption.
Cc: <stable@vger.kernel.org>
Fixes: 48ec83bcbc ("iommu/arm-smmu: Add initial driver support for ARM SMMUv3 devices")
Tested-by: Robin Murphy <robin.murphy@arm.com>
Reported-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Enabling stalling faults can result in hardware deadlock on poorly
designed systems, particularly those with a PCI root complex upstream of
the SMMU.
Although it's not really Linux's job to save hardware integrators from
their own misfortune, it *is* our job to stop userspace (e.g. VFIO
clients) from hosing the system for everybody else, even if they might
already be required to have elevated privileges.
Given that the fault handling code currently executes entirely in IRQ
context, there is nothing that can sensibly be done to recover from
things like page faults anyway, so let's rip this code out for now and
avoid the potential for deadlock.
Cc: <stable@vger.kernel.org>
Fixes: 48ec83bcbc ("iommu/arm-smmu: Add initial driver support for ARM SMMUv3 devices")
Reported-by: Matt Evans <matt.evans@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
When starting a kexec/kdump kernel, the GIC ITS will already have been
enabled. According to the ARM Generic Interrupt Controller
Architecture Specification (GIC architecture Version 3.0 and version
4.0), writing to GITS_BASER<n> or GITS_CBASER is "UNPREDICTABLE" when
the ITS is enabled. On Cavium Thunder systems, this prevents the ITS
from being initializing in the kexec/kdump kernel, resulting in
failure to register/enable interrupts for all devices.
The fix is to disable the ITS if it is not already in the disabled
state. This allows the ITS to be properly initialized and then
re-enabled in the kexec/kdump kernel.
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: David Daney <david.daney@cavium.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
In the unlikely event of a global command queue error, the ARM SMMUv3
driver attempts to convert the problematic command into a CMD_SYNC and
resume the command queue. Unfortunately, this code is pretty badly
broken:
1. It uses the index into the error string table as the CMDQ index,
so we probably read the wrong entry out of the queue
2. The arguments to queue_write are the wrong way round, so we end up
writing from the queue onto the stack.
These happily cancel out, so the kernel is likely to stay alive, but
the command queue will probably fault again when we resume.
This patch fixes the error handling code to use the correct queue index
and write back the CMD_SYNC to the faulting entry.
Cc: <stable@vger.kernel.org>
Fixes: 48ec83bcbc ("iommu/arm-smmu: Add initial driver support for ARM SMMUv3 devices")
Reported-by: Diwakar Subraveti <Diwakar.Subraveti@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Due to the attribute bits being all over the place in the different
types of short-descriptor PTEs, when remapping an existing entry, e.g.
splitting a section into pages, we take the approach of decomposing
the PTE attributes back to the IOMMU API flags to start from scratch.
On inspection, though, the existing code seems to have got the read-only
bit backwards and ignored the XN bit. How embarrassing...
Fortunately the primary user so far, the Mediatek IOMMU, both never
splits blocks (because it only serves non-overlapping DMA API calls) and
also ignores permissions anyway, but let's put things right before any
future users trip up.
Cc: <stable@vger.kernel.org>
Fixes: e5fc9753b1 ("iommu/io-pgtable: Add ARMv7 short descriptor support")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
In the case where a descriptor is chained on a running channel, and as
explained in the comment in the code 10 lines above, the success of the
chaining is ensured either if :
- the DMA is still running
- or if the chained transfer is completed
Unfortunately the transfer completness test was done on the descriptor
to which the transfer was chained, and not the transfer being chained at
the end, ie. hot-chained.
This corner case is extremely hard to trigger, as usually the DMA chain
is still running, and the first case takes care of returning success of
the hot-chaining. It was seen by hot-chaining several "small transfers"
to a running "big transfer", not in a real-life usecase but by testing
the robustness of the driver.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Oliver Neukum says:
====================
fixes to kaweth in response to Umap2 testing
These patches fix an oops in firmware downloading and an oops due
to a memory allocation failure
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes the oops discovered by the Umap2 project and Alan Stern.
The intf member needs to be set before the firmware is downloaded.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It was failing on successful registration returning meaningless errors.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Fixes: 55954f3bfd ("net: ethernet: bgmac: move BCMA MDIO Phy code into a separate file")
Signed-off-by: David S. Miller <davem@davemloft.net>
When tcp_sendmsg() allocates a fresh and empty skb, it puts it at the
tail of the write queue using tcp_add_write_queue_tail()
Then it attempts to copy user data into this fresh skb.
If the copy fails, we undo the work and remove the fresh skb.
Unfortunately, this undo lacks the change done to tp->highest_sack and
we can leave a dangling pointer (to a freed skb)
Later, tcp_xmit_retransmit_queue() can dereference this pointer and
access freed memory. For regular kernels where memory is not unmapped,
this might cause SACK bugs because tcp_highest_sack_seq() is buggy,
returning garbage instead of tp->snd_nxt, but with various debug
features like CONFIG_DEBUG_PAGEALLOC, this can crash the kernel.
This bug was found by Marco Grassi thanks to syzkaller.
Fixes: 6859d49475 ("[TCP]: Abstract tp->highest_sack accessing & point to next skb")
Reported-by: Marco Grassi <marco.gra@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Cc: Yuchung Cheng <ycheng@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
At present the code to check in kdump kernel was not disabling
allocation of resources when CONFIG_CHELSIO_T4_DCB is defined, move the
code outside #defines so that it gets disabled irrespective of #define,
when in kdump kernel.
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ethtool_ops .get_regs function attempts to read the nonexistent
register NIC_QSET_SQ_0_7_CNM_CHG, which produces a "bus error" type
OOPs.
Fix by not attempting to read, and removing the definition of,
NIC_QSET_SQ_0_7_CNM_CHG. A zero is written into the register dump to
keep the layout unchanged.
Signed-off-by: David Daney <david.daney@cavium.com>
Cc: <stable@vger.kernel.org> # 4.4.x-
Signed-off-by: David S. Miller <davem@davemloft.net>
Driver uses netif_tx_queue_stopped() to make sure the xmit_more
indication will be honored, but that only checks for DRV_XOFF.
At the same time, it's possible that during transmission the DQL will
close the transmission queue with STACK_XOFF indication.
In re-configuration flows, when the threshold is relatively low, it's
possible that the device has no pending tranmissions, and during
tranmission the driver would miss doorbelling the HW.
Since there are no pending transmission, there will never be a Tx
completion [and thus the DQL would not remove the STACK_XOFF indication],
eventually causing the Tx queue to timeout.
While we're at it - also doorbell in case driver has to close the
transmission queue on its own [although this one is less important -
if the ring is full, we're bound to receive completion eventually,
which means the doorbell would only be postponed and not indefinetly
blocked].
Fixes: 312e06761c ("qede: Utilize xmit_more")
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The original error was thought to be corruption, but was actually caused by:
make-bcache --data-offset N
where N was in bytes and should have been in sectors. While userspace
tools should be updated to check --data-offset beyond end of volume,
hopefully this will help others that might not have noticed the units.
Signed-off-by: Eric Wheeler <bcache@linux.ewheeler.net>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
This patch fixes a cachedev registration-time allocation deadlock.
This can deadlock on boot if your initrd auto-registeres bcache devices:
Allocator thread:
[ 720.727614] INFO: task bcache_allocato:3833 blocked for more than 120 seconds.
[ 720.732361] [<ffffffff816eeac7>] schedule+0x37/0x90
[ 720.732963] [<ffffffffa05192b8>] bch_bucket_alloc+0x188/0x360 [bcache]
[ 720.733538] [<ffffffff810e6950>] ? prepare_to_wait_event+0xf0/0xf0
[ 720.734137] [<ffffffffa05302bd>] bch_prio_write+0x19d/0x340 [bcache]
[ 720.734715] [<ffffffffa05190bf>] bch_allocator_thread+0x3ff/0x470 [bcache]
[ 720.735311] [<ffffffff816ee41c>] ? __schedule+0x2dc/0x950
[ 720.735884] [<ffffffffa0518cc0>] ? invalidate_buckets+0x980/0x980 [bcache]
Registration thread:
[ 720.710403] INFO: task bash:3531 blocked for more than 120 seconds.
[ 720.715226] [<ffffffff816eeac7>] schedule+0x37/0x90
[ 720.715805] [<ffffffffa05235cd>] __bch_btree_map_nodes+0x12d/0x150 [bcache]
[ 720.716409] [<ffffffffa0522d30>] ? bch_btree_insert_check_key+0x1c0/0x1c0 [bcache]
[ 720.717008] [<ffffffffa05236e4>] bch_btree_insert+0xf4/0x170 [bcache]
[ 720.717586] [<ffffffff810e6950>] ? prepare_to_wait_event+0xf0/0xf0
[ 720.718191] [<ffffffffa0527d9a>] bch_journal_replay+0x14a/0x290 [bcache]
[ 720.718766] [<ffffffff810cc90d>] ? ttwu_do_activate.constprop.94+0x5d/0x70
[ 720.719369] [<ffffffff810cf684>] ? try_to_wake_up+0x1d4/0x350
[ 720.719968] [<ffffffffa05317d0>] run_cache_set+0x580/0x8e0 [bcache]
[ 720.720553] [<ffffffffa053302e>] register_bcache+0xe2e/0x13b0 [bcache]
[ 720.721153] [<ffffffff81354cef>] kobj_attr_store+0xf/0x20
[ 720.721730] [<ffffffff812a2dad>] sysfs_kf_write+0x3d/0x50
[ 720.722327] [<ffffffff812a225a>] kernfs_fop_write+0x12a/0x180
[ 720.722904] [<ffffffff81225177>] __vfs_write+0x37/0x110
[ 720.723503] [<ffffffff81228048>] ? __sb_start_write+0x58/0x110
[ 720.724100] [<ffffffff812cedb3>] ? security_file_permission+0x23/0xa0
[ 720.724675] [<ffffffff812258a9>] vfs_write+0xa9/0x1b0
[ 720.725275] [<ffffffff8102479c>] ? do_audit_syscall_entry+0x6c/0x70
[ 720.725849] [<ffffffff81226755>] SyS_write+0x55/0xd0
[ 720.726451] [<ffffffff8106a390>] ? do_page_fault+0x30/0x80
[ 720.727045] [<ffffffff816f2cae>] system_call_fastpath+0x12/0x71
The fifo code in upstream bcache can't use the last element in the buffer,
which was the cause of the bug: if you asked for a power of two size,
it'd give you a fifo that could hold one less than what you asked for
rather than allocating a buffer twice as big.
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
Tested-by: Eric Wheeler <bcache@linux.ewheeler.net>
Cc: stable@vger.kernel.org
register_cache() is supposed to return an error string on error so that
register_bcache() will will blkdev_put and cleanup other user counters,
but it does not set 'char *err' when cache_alloc() fails (eg, due to
memory pressure) and thus register_bcache() performs no cleanup.
register_bcache() <----------\ <- no jump to err_close, no blkdev_put()
| |
+->register_cache() | <- fails to set char *err
| |
+->cache_alloc() ---/ <- returns error
This patch sets `char *err` for this failure case so that register_cache()
will cause register_bcache() to correctly jump to err_close and do
cleanup. This was tested under OOM conditions that triggered the bug.
Signed-off-by: Eric Wheeler <bcache@linux.ewheeler.net>
Cc: Kent Overstreet <kent.overstreet@gmail.com>
Cc: stable@vger.kernel.org
Pull more drm fixes from Dave Airlie:
"Daniel pointed out I'd missed some i915 fixes, and I also found a
single etnaviv fix I missed.
So here they are"
* tag 'drm-fixes-for-4.8-rc3-2' of git://people.freedesktop.org/~airlied/linux:
drm/etnaviv: take GPU lock later in the submit process
drm/i915: Fix modeset handling during gpu reset, v5.
drm/i915: fix aliasing_ppgtt leak
drm/i915: fix WaInsertDummyPushConstPs
drm/i915: Fix iboost setting for SKL Y/U DP DDI buffer translation entry 2
drm/i915/gen9: Give one extra block per line for SKL plane WM calculations
drm/i915: Acquire audio powerwell for HD-Audio registers
drm/i915: Add missing rpm wakelock to GGTT pread
drm/i915/fbc: FBC causes display flicker when VT-d is enabled on Skylake
drm/i915: Clean up the extra RPM ref on CHV with i915.enable_rc6=0
drm/i915: Program iboost settings for HDMI/DVI on SKL
drm/i915: Fix iboost setting for DDI with 4 lanes on SKL
drm/i915: Handle ENOSPC after failing to insert a mappable node
drm/i915: Flush GT idle status upon reset
Pull DeviceTree fixes from Rob Herring:
- a couple of DT node ref counting fixes
- fix __unflatten_device_tree for PPC PCI hotplug case
- rework marking irq controllers as OF_POPULATED in cases where real
driver is used.
- disable of_platform_default_populate_init on PPC. The change in
initcall order causes problems which need to be sorted out later.
* tag 'devicetree-fixes-for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: fix reference counting in of_graph_get_endpoint_by_regs
of/platform: disable the of_platform_default_populate_init() for all the ppc boards
ARM: imx6: mark GPC node as not populated after irq init to probe pm domain driver
of/irq: Mark interrupt controllers as populated before initialisation
drivers/of: Validate device node in __unflatten_device_tree()
of: Delete an unnecessary check before the function call "of_node_put"
Use scsi_is_sas_rphy() instead of is_sas_attached() to decide whether we
should obtain the SAS address from a scsi device or not. This will
prevent us from tripping on the BUG_ON() in sas_sdev_to_rdev() if the
rphy isn't attached to the SAS transport class, like it is with hpsa's
logical devices.
Fixes: 3f8d6f2a0 ('ses: fix discovery of SATA devices in SAS enclosures')
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Thread A Thread B
- inode_lock fileA
- inode_lock fileB
- inode_lock fileA
- inode_lock fileB
We may encounter above potential deadlock during moving file range in
concurrent scenario. This patch fixes the issue by using inode_trylock
instead.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Only if two input files are regular files, we allow copying data in
range of them, otherwise, deny it.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This reverts commit a2ee0a3003.
When testing with generic/032 of xfstest suit, failure message will be
reported as below:
generic/032 8s ... [failed, exit status 1] - output mismatch (see results/generic/032.out.bad)
--- tests/generic/032.out 2015-01-11 16:52:27.643681072 +0800
+++ results/generic/032.out.bad 2016-08-06 13:44:43.861330500 +0800
@@ -1,5 +1,5 @@
QA output created by 032
-100 iterations
-0000000 cdcd cdcd cdcd cdcd cdcd cdcd cdcd cdcd
-*
-0100000
+1: [768..775]: unwritten
+Unwritten extents found!
...
(Run 'diff -u tests/generic/032.out results/generic/032.out.bad' to see the entire diff)
Ran: generic/032
Failures: generic/032
Failed 1 of 1 tests
In write_end(), we should update i_size of inode before unlock page,
otherwise, we will lose newly updated data in following race condition.
Thread A Thread B
- write_end
- unlock page
- writepages
- lock_page
- writepage
if page is out-of-range of file size,
we will skip writting the page.
- update i_size
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
LKP reported -36.3% regression of fsmark.files_per_sec due to this patch.
I've confirmed that fxmark [1] has also slight regression for DWAL.
[1] https://github.com/sslab-gatech/fxmark
This reverts commit ec795418c4.
Pull documentation fixes from Jonathan Corbet:
"Three small fixes for Sphinx-formatted documentation generation"
* tag '4.8-doc-fixes' of git://git.lwn.net/linux:
doc-rst: customize RTD theme, drop padding of inline literal
docs: kernel-documentation: remove some highlight directives
docs: Set the Sphinx default highlight language to "guess"
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter updates for your net tree,
they are:
1) Dump only conntrack that belong to this namespace via /proc file.
This is some fallout from the conversion to single conntrack table
for all netns, patch from Liping Zhang.
2) Missing MODULE_ALIAS_NF_LOGGER() for the ARP family that prevents
module autoloading, also from Liping Zhang.
3) Report overquota event to the right netnamespace, again from Liping.
4) Fix tproxy listener sk refcount that leads to crash, from
Eric Dumazet.
5) Fix racy refcounting on object deletion from nfnetlink and rule
removal both for nfacct and cttimeout, from Liping Zhang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When the controller is configured to be dual role and it's in host mode,
if bind udc and gadgt driver, those gadget operations will do gadget
disconnect and finally pull down DP line, which will break host function.
Cc: <stable@vger.kernel.org> # 4.1+
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Collection of i915 fixes.
* tag 'drm-intel-fixes-2016-08-15' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Fix modeset handling during gpu reset, v5.
drm/i915: fix aliasing_ppgtt leak
drm/i915: fix WaInsertDummyPushConstPs
drm/i915: Fix iboost setting for SKL Y/U DP DDI buffer translation entry 2
drm/i915/gen9: Give one extra block per line for SKL plane WM calculations
drm/i915: Acquire audio powerwell for HD-Audio registers
drm/i915: Add missing rpm wakelock to GGTT pread
drm/i915/fbc: FBC causes display flicker when VT-d is enabled on Skylake
drm/i915: Clean up the extra RPM ref on CHV with i915.enable_rc6=0
drm/i915: Program iboost settings for HDMI/DVI on SKL
drm/i915: Fix iboost setting for DDI with 4 lanes on SKL
drm/i915: Handle ENOSPC after failing to insert a mappable node
drm/i915: Flush GT idle status upon reset
Pull x86 fixes from Ingo Molnar:
"An initrd microcode loading fix, and an SMP bootup topology setup fix
to resolve crashes on SGI/UV systems if the BIOS is configured in a
certain way"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/smp: Fix __max_logical_packages value setup
x86/microcode/AMD: Fix initrd loading with CONFIG_RANDOMIZE_MEMORY=y
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, but also start/stop filter related fixes, a perf
event read() fix, a fix uncovered by fuzzing, and an uprobes leak fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Check return value of the perf_event_read() IPI
perf/core: Enable mapping of the stop filters
perf/core: Update filters only on executable mmap
perf/core: Fix file name handling for start/stop filters
perf/core: Fix event_function_local()
uprobes: Fix the memcg accounting
perf intel-pt: Fix occasional decoding errors when tracing system-wide
tools: Sync kvm related header files for arm64 and s390
perf probe: Release resources on error when handling exit paths
perf probe: Check for dup and fdopen failures
perf symbols: Fix annotation of objects with debuginfo files
perf script: Don't disable use_callchain if input is pipe
perf script: Show proper message when failed list scripts
perf jitdump: Add the right header to get the major()/minor() definitions
perf ppc64le: Fix build failure when libelf is not present
perf tools mem: Fix -t store option for record command
perf intel-pt: Fix ip compression
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Do not access outside hw cache name arrays (Arnaldo Carvalho de Melo)
- Use addr_location::addr instead of ip for entries when unwinding using
DWARF CFI, fixing the "srcline" information for userspace application
callchains (Milian Wolff)
- Reinstate strlcpy() header guard with __UCLIBC__, fixing the build
with uclibc, detected when building for the ARC architecture (Vineet Gupta)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We have to check if the values are >= *_MAX, not just >, fix it.
From the bugzilla report:
''In file /tools/perf/util/evsel.c function __perf_evsel__hw_cache_name
it appears that there is a bug that reads beyond the end of the buffer.
The statement "if (type > PERF_COUNT_HW_CACHE_MAX)" allows type to be
equal to the maximum value. Later, when statement "if
(!perf_evsel__is_cache_op_valid(type, op))" is executed, the function
can access array perf_evsel__hw_cache_stat[type] beyond the end of the
buffer.
It appears to me that the statement "if (type > PERF_COUNT_HW_CACHE_MAX)"
should be "if (type >= PERF_COUNT_HW_CACHE_MAX)"
Bug found with Coverity and manual code review. No attempts were made to
execute the code with a maximum type value.''
Committer note:
Testing it:
$ perf record -e $(echo $(perf list cache | cut -d \[ -f1) | sed 's/ /,/g') usleep 1
[ perf record: Woken up 16 times to write data ]
[ perf record: Captured and wrote 0.023 MB perf.data (34 samples) ]
$ perf evlist
L1-dcache-load-misses
L1-dcache-loads
L1-dcache-stores
L1-icache-load-misses
LLC-load-misses
LLC-loads
LLC-store-misses
LLC-stores
branch-load-misses
branch-loads
dTLB-load-misses
dTLB-loads
dTLB-store-misses
dTLB-stores
iTLB-load-misses
iTLB-loads
node-load-misses
node-loads
node-store-misses
node-stores
$ perf list cache
List of pre-defined events (to be used in -e):
L1-dcache-load-misses [Hardware cache event]
L1-dcache-loads [Hardware cache event]
L1-dcache-stores [Hardware cache event]
L1-icache-load-misses [Hardware cache event]
LLC-load-misses [Hardware cache event]
LLC-loads [Hardware cache event]
LLC-store-misses [Hardware cache event]
LLC-stores [Hardware cache event]
branch-load-misses [Hardware cache event]
branch-loads [Hardware cache event]
dTLB-load-misses [Hardware cache event]
dTLB-loads [Hardware cache event]
dTLB-store-misses [Hardware cache event]
dTLB-stores [Hardware cache event]
iTLB-load-misses [Hardware cache event]
iTLB-loads [Hardware cache event]
node-load-misses [Hardware cache event]
node-loads [Hardware cache event]
node-store-misses [Hardware cache event]
node-stores [Hardware cache event]
$
Reported-by: Brian Sweeney <bsweeney@lgsinnovations.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=153351
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
perf tools build in recent kernels spews splat when cross compiling with uClibc:
| CC util/alias.o
| In file included from tools/perf/util/../ui/../util/cache.h:8:0,
| from tools/perf/util/../ui/helpline.h:7,
| from tools/perf/util/debug.h:8,
| from arch/../util/cpumap.h:9,
| from arch/../util/env.h:5,
| from arch/common.h:4,
| from arch/common.c:3:
| tools/include/linux/string.h:12:15: warning: redundant redeclaration of ‘strlcpy’ [-Wredundant-decls]
| extern size_t strlcpy(char *dest, const char *src, size_t size);
^
This is after commit 61a6445e46 ("tools lib: Guard the strlcpy() header with
__GLIBC__").
The problem is uClibc also defines __GLIBC__ for exported headers for
applications. So add that specific check to not trip for uClibc.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petri Gynther <pgynther@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: linux-snps-arc@lists.infradead.org
Link: http://lkml.kernel.org/r/1471537703-16439-1-git-send-email-vgupta@synopsys.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull arm64 fixes from Catalin Marinas:
- Avoid a literal load with the MMU off on the CPU resume path
(potential inconsistency between cache and RAM)
- Build error with CONFIG_ACPI=n fixed
- Compiler warning in the arch/arm64/mm/dump.c code fixed
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix shift warning in arch/arm64/mm/dump.c
arm64: kernel: avoid literal load of virtual address with MMU off
arm64: Fix NUMA build error when !CONFIG_ACPI
Pull ARM fixes from Russell King:
"Only three fixes this time:
- Emil found an overflow problem with the memory layout sanity check.
- Ard Biesheuvel noticed that late-allocated page tables (for EFI)
weren't being properly constructed.
- Guenter Roeck reported a problem found on qemu caused by the recent
addr_limit changes"
* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: fix address limit restoration for undefined instructions
ARM: 8591/1: mm: use fully constructed struct pages for EFI pgd allocations
ARM: 8590/1: sanity_check_meminfo(): avoid overflow on vmalloc_limit
Pull power management fixes from Rafael Wysocki:
"More hibernation-related material: one fix for a recent regression in
the core, one small cleanup of the x86-64 resume code and a
documentation update.
Specifics:
- Fix a hibernate core regression resulting from uncovering a latent
bug in its implementation of memory bitmaps by a recent commit
(James Morse).
- Use __pa() to compute a physical address in the x86-64 code
finalizing resume from hibernation (Rafael Wysocki).
- Update power management documentation related to system sleep
states to remove outdated information from it and to add a
description of a recently introduced hibernation debug feature to
it (Rafael Wysocki)"
* tag 'pm-4.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / hibernate: Fix rtree_next_node() to avoid walking off list ends
x86/power/64: Use __pa() for physical address computation
PM / sleep: Update some system sleep documentation
Pull drm fixes from Dave Airlie:
"Pretty quiet so far:
- a few amdgpu/radeon fixup for pcie pm changes
- a couple of amdgpu fixes
- some build fixes
- printk fix"
* tag 'drm-fixes-for-4.8-rc3' of git://people.freedesktop.org/~airlied/linux:
drm/amdgpu: Change GART offset to 64-bit
drm/mediatek: add ARM_SMCCC dependency
drm/mediatek: add CONFIG_OF dependency
drm/mediatek: add COMMON_CLK dependency
drm/amdgpu: Fix memory trashing if UVD ring test fails
drm/amdgpu: fix vm init error path
drm/amdkfd: print doorbell offset as a hex value
Revert "drm/radeon: work around lack of upstream ACPI support for D3cold"
Revert "drm/amdgpu: work around lack of upstream ACPI support for D3cold"
A bugfix for the fintek driver required defining some macros, but
one of them clashes with a system header on ARM:
drivers/tty/serial/8250/8250_fintek.c:34:0: error: "IRQ_MODE" redefined [-Werror]
#define IRQ_MODE 0x70
In file included from /git/arm-soc/arch/arm/include/asm/ptrace.h:13:0,
from /git/arm-soc/arch/arm/include/asm/irqflags.h:6,
from /git/arm-soc/include/linux/irqflags.h:15,
from /git/arm-soc/arch/arm/include/asm/bitops.h:27,
from /git/arm-soc/include/linux/bitops.h:36,
from /git/arm-soc/include/linux/kernel.h:10,
from /git/arm-soc/include/linux/list.h:8,
from /git/arm-soc/include/linux/module.h:9,
from /git/arm-soc/drivers/tty/serial/8250/8250_fintek.c:11:
arch/arm/include/uapi/asm/ptrace.h:55:0: note: this is the location of the previous definition
This renames the newly introduced 'IRQ_MODE' macro to FINTEK_IRQ_MODE.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 4da22f1418 ("serial: 8250_fintek: fix the mismatched IRQ mode")
Link: https://patchwork.kernel.org/patch/9200119/
Acked-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Acked-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 65aca64d05.
The patches for twl6040 MFD and clk missed the merge window and
causing the McPDM driver to never probe since it is put back to
the deferred list because the missing drivers.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In general, when we want to delete a netns, cttimeout_net_exit will
be called before ipt_unregister_table, i.e. before ctnl_timeout_put.
But after call kfree_rcu in cttimeout_net_exit, we will still decrease
the timeout object's refcnt in ctnl_timeout_put, this is incorrect,
and will cause a use after free error.
It is easy to reproduce this problem:
# while : ; do
ip netns add xxx
ip netns exec xxx nfct add timeout testx inet icmp timeout 200
ip netns exec xxx iptables -t raw -p icmp -I OUTPUT -j CT --timeout testx
ip netns del xxx
done
=======================================================================
BUG kmalloc-96 (Tainted: G B E ): Poison overwritten
-----------------------------------------------------------------------
INFO: 0xffff88002b5161e8-0xffff88002b5161e8. First byte 0x6a instead of
0x6b
INFO: Allocated in cttimeout_new_timeout+0xd4/0x240 [nfnetlink_cttimeout]
age=104 cpu=0 pid=3330
___slab_alloc+0x4da/0x540
__slab_alloc+0x20/0x40
__kmalloc+0x1c8/0x240
cttimeout_new_timeout+0xd4/0x240 [nfnetlink_cttimeout]
nfnetlink_rcv_msg+0x21a/0x230 [nfnetlink]
[ ... ]
So only when the refcnt decreased to 0, we call kfree_rcu to free the
timeout object. And like nfnetlink_acct do, use atomic_cmpxchg to
avoid race between ctnl_timeout_try_del and ctnl_timeout_put.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Suppose that we input the following commands at first:
# nfacct add test
# iptables -A INPUT -m nfacct --nfacct-name test
And now "test" acct's refcnt is 2, but later when we try to delete the
"test" nfacct and the related iptables rule at the same time, race maybe
happen:
CPU0 CPU1
nfnl_acct_try_del nfnl_acct_put
atomic_dec_and_test //ref=1,testfail -
- atomic_dec_and_test //ref=0,testok
- kfree_rcu
atomic_inc //ref=1 -
So after the rcu grace period, nf_acct will be freed but it is still linked
in the nfnl_acct_list, and we can access it later, then oops will happen.
Convert atomic_dec_and_test and atomic_inc combinaiton to one atomic
operation atomic_cmpxchg here to fix this problem.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
ahci currently insists on an explicit call to pci_intx() before falling
back from MSI or MSI-X to legacy IRQs. As pci_intx() is a no-op if the
command register already contains the right value it seems safe and useful
to add this call to pci_alloc_irq_vectors() so that ahci can just use
pci_alloc_irq_vectors().
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Sometimes host prepares and downloads a large amsdu packet to firmware
which leads to a memory corruption in firmware.
The reason is __dev_alloc_skb() may allocate larger buffer than required
size. This patch solves the problem by checking "adapter->tx_buf_size"
instead of relying on skb_tailroom().
Signed-off-by: Cathy Luo <cluo@marvell.com>
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
When building with 48-bit VAs and 16K page configuration, it's possible
to get the following warning when building the arm64 page table dumping
code:
arch/arm64/mm/dump.c: In function ‘walk_pud’:
arch/arm64/mm/dump.c:274:102: warning: right shift count >= width of type [-Wshift-count-overflow]
This is because pud_offset(pgd, 0) performs a shift to the right by 36
while the value 0 has the type 'int' by default, therefore 32-bit.
This patch modifies all the p*_offset() uses in arch/arm64/mm/dump.c to
use 0UL for the address argument.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
KVM/ARM Fixes for v4.8-rc3
This tag contains the following fixes on top of v4.8-rc1:
- ITS init issues
- ITS error handling issues
- ITS IRQ leakage fix
- Plug a couple of ITS race conditions
- An erratum workaround for timers
- Some removal of misleading use of errors and comments
- A fix for GICv3 on 32-bit guests
When the host supported TSC scaling, L2 would use a TSC multiplier of
0, which causes a VM entry failure. Now L2's TSC uses the same
multiplier as L1.
Signed-off-by: Peter Feiner <pfeiner@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If vmcs12 does not intercept APIC_BASE writes, then KVM will handle the
write with vmcs02 as the current VMCS.
This will incorrectly apply modifications intended for vmcs01 to vmcs02
and L2 can use it to gain access to L0's x2APIC registers by disabling
virtualized x2APIC while using msr bitmap that assumes enabled.
Postpone execution of vmx_set_virtual_x2apic_mode until vmcs01 is the
current VMCS. An alternative solution would temporarily make vmcs01 the
current VMCS, but it requires more care.
Fixes: 8d14695f95 ("x86, apicv: add virtual x2apic support")
Reported-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
msr bitmap can be used to avoid a VM exit (interception) on guest MSR
accesses. In some configurations of VMX controls, the guest can even
directly access host's x2APIC MSRs. See SDM 29.5 VIRTUALIZING MSR-BASED
APIC ACCESSES.
L2 could read all L0's x2APIC MSRs and write TPR, EOI, and SELF_IPI.
To do so, L1 would first trick KVM to disable all possible interceptions
by enabling APICv features and then would turn those features off;
nested_vmx_merge_msr_bitmap() only disabled interceptions, so VMX would
not intercept previously enabled MSRs even though they were not safe
with the new configuration.
Correctly re-enabling interceptions is not enough as a second bug would
still allow L1+L2 to access host's MSRs: msr bitmap was shared for all
VMCSs, so L1 could trigger a race to get the desired combination of msr
bitmap and VMX controls.
This fix allocates a msr bitmap for every L1 VCPU, allows only safe
x2APIC MSRs from L1's msr bitmap, and disables msr bitmaps if they would
have to intercept everything anyway.
Fixes: 3af18d9c5f ("KVM: nVMX: Prepare for using hardware MSR bitmap")
Reported-by: Jim Mattson <jmattson@google.com>
Suggested-by: Wincy Van <fanwenyi0529@gmail.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
regmap_write
->_regmap_raw_write
-->regcache_write first and than use map->bus->write to wirte i2c or spi
But if the i2c or spi transfer failed, But the cache is updated, So if I use
regmap_read will get the cache data which is not the real register value.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Create a new entry for the Samsung SPI driver supported by the
drivers/spi/spi-s3c* and remove it from its original place under
"ARM/SAMSUNG EXYNOS ARM ARCHITECTURES".
The original maintainership inherited from the Samsung Exynos
ARM Architecture is kept as it was (i.e. Kukjin and Krzysztof), I
will help and co-maintain the driver.
Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit:
5743021831 ("sched/cputime: Count actually elapsed irq & softirq time")
... fixed a bug but also triggered a regression:
On an i5 laptop, 4 pCPUs, 4vCPUs for one full dynticks guest, there are four
CPU hog processes(for loop) running in the guest, I hot-unplug the pCPUs
on host one by one until there is only one left, then observe CPU utilization
via 'top' in the guest, it shows:
100% st for cpu0(housekeeping)
75% st for other CPUs (nohz full mode)
However, w/o this commit it shows the correct 75% for all four CPUs.
When a guest is interrupted for a longer amount of time, missed clock ticks
are not redelivered later. Because of that, we should not limit the amount
of steal time accounted to the amount of time that the calling functions
think have passed.
However, the interval returned by account_other_time() is NOT rounded down
to the nearest jiffy, while the base interval in get_vtime_delta() it is
subtracted from is, so the max cputime limit is required to avoid underflow.
This patch fixes the regression by limiting the account_other_time() from
get_vtime_delta() to avoid underflow, and lets the other three call sites
(in account_other_time() and steal_account_process_time()) account however
much steal time the host told us elapsed.
Suggested-by: Rik van Riel <riel@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krcmar <rkrcmar@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm@vger.kernel.org
Link: http://lkml.kernel.org/r/1471399546-4069-1-git-send-email-wanpeng.li@hotmail.com
[ Improved the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Mike reports:
Roughly 10% of the time, ltp testcase getrusage04 fails:
getrusage04 0 TINFO : Expected timers granularity is 4000 us
getrusage04 0 TINFO : Using 1 as multiply factor for max [us]time increment (1000+4000us)!
getrusage04 0 TINFO : utime: 0us; stime: 179us
getrusage04 0 TINFO : utime: 3751us; stime: 0us
getrusage04 1 TFAIL : getrusage04.c:133: stime increased > 5000us:
And tracked it down to the case where the task simply doesn't get
_any_ [us]time ticks.
Update the code to assume all rtime is utime when we lack information,
thus ensuring a task that elides the tick gets time accounted.
Reported-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Tested-by: Mike Galbraith <umgwanakikbuti@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Fredrik Markstrom <fredrik.markstrom@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim <rkrcmar@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: stable@vger.kernel.org # 4.3+
Fixes: 9d7fb04276 ("sched/cputime: Guarantee stime + utime == rtime")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Function perf_event_mmap() is called by the MM subsystem each time
part of a binary is loaded in memory. There can be several mapping
for a binary, many times unrelated to the code section.
Each time a section of a binary is mapped address filters are
updated, event when the map doesn't pertain to the code section.
The end result is that filters are configured based on the last map
event that was received rather than the last mapping of the code
segment.
For example if we have an executable 'main' that calls library
'libcstest.so.1.0', and that we want to collect traces on code
that is in that library. The perf cmd line for this scenario
would be:
perf record -e cs_etm// --filter 'filter 0x72c/0x40@/opt/lib/libcstest.so.1.0' --per-thread ./main
Resulting in binaries being mapped this way:
root@linaro-nano:~# cat /proc/1950/maps
00400000-00401000 r-xp 00000000 08:02 33169 /home/linaro/main
00410000-00411000 r--p 00000000 08:02 33169 /home/linaro/main
00411000-00412000 rw-p 00001000 08:02 33169 /home/linaro/main
7fa2464000-7fa2474000 rw-p 00000000 00:00 0
7fa2474000-7fa25a4000 r-xp 00000000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so
7fa25a4000-7fa25b3000 ---p 00130000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so
7fa25b3000-7fa25b7000 r--p 0012f000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so
7fa25b7000-7fa25b9000 rw-p 00133000 08:02 543 /lib/aarch64-linux-gnu/libc-2.21.so
7fa25b9000-7fa25bd000 rw-p 00000000 00:00 0
7fa25bd000-7fa25be000 r-xp 00000000 08:02 38308 /opt/lib/libcstest.so.1.0
7fa25be000-7fa25cd000 ---p 00001000 08:02 38308 /opt/lib/libcstest.so.1.0
7fa25cd000-7fa25ce000 r--p 00000000 08:02 38308 /opt/lib/libcstest.so.1.0
7fa25ce000-7fa25cf000 rw-p 00001000 08:02 38308 /opt/lib/libcstest.so.1.0
7fa25cf000-7fa25eb000 r-xp 00000000 08:02 574 /lib/aarch64-linux-gnu/ld-2.21.so
7fa25ef000-7fa25f2000 rw-p 00000000 00:00 0
7fa25f7000-7fa25f9000 rw-p 00000000 00:00 0
7fa25f9000-7fa25fa000 r--p 00000000 00:00 0 [vvar]
7fa25fa000-7fa25fb000 r-xp 00000000 00:00 0 [vdso]
7fa25fb000-7fa25fc000 r--p 0001c000 08:02 574 /lib/aarch64-linux-gnu/ld-2.21.so
7fa25fc000-7fa25fe000 rw-p 0001d000 08:02 574 /lib/aarch64-linux-gnu/ld-2.21.so
7ff2ea8000-7ff2ec9000 rw-p 00000000 00:00 0 [stack]
root@linaro-nano:~#
Before 'main()' can execute 'libcstest.so.1.0' has to be loaded in
memory. Once that has been done perf_event_mmap() has been called
4 times, with the last map starting at address 0x7fa25ce000 and
the address filter configured to start filtering when the
IP has passed over address 0x0x7fa25ce72c (0x7fa25ce000 + 0x72c).
But that is wrong since the code segment for library 'libcstest.so.1.0'
as been mapped at 0x7fa25bd000, resulting in traces not being
collected.
This patch corrects the situation by requesting that address
filters be updated only if the mapped event is for a code
segment.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1468860187-318-3-git-send-email-mathieu.poirier@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Frank reported kernel panic when he disabled several cores in BIOS
via following option:
Core Disable Bitmap(Hex) [0]
with number 0xFFE, which leaves 16 CPUs in system (out of 48).
The kernel panic below goes along with following messages:
smpboot: Max logical packages: 2^M
smpboot: APIC(0) Converting physical 0 to logical package 0^M
smpboot: APIC(20) Converting physical 1 to logical package 1^M
smpboot: APIC(40) Package 2 exceeds logical package map^M
smpboot: CPU 8 APICId 40 disabled^M
smpboot: APIC(60) Package 3 exceeds logical package map^M
smpboot: CPU 12 APICId 60 disabled^M
...
general protection fault: 0000 [#1] SMP^M
Modules linked in:^M
CPU: 15 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc5+ #1^M
Hardware name: SGI UV300/UV300, BIOS SGI UV 300 series BIOS 05/25/2016^M
task: ffff8801673e0000 ti: ffff8801673ac000 task.ti: ffff8801673ac000^M
RIP: 0010:[<ffffffff81014d54>] [<ffffffff81014d54>] uncore_change_context+0xd4/0x180^M
...
[<ffffffff810158ac>] uncore_event_init_cpu+0x6c/0x70^M
[<ffffffff81d8c91c>] intel_uncore_init+0x1c2/0x2dd^M
[<ffffffff81d8c75a>] ? uncore_cpu_setup+0x17/0x17^M
[<ffffffff81002190>] do_one_initcall+0x50/0x190^M
[<ffffffff810ab193>] ? parse_args+0x293/0x480^M
[<ffffffff81d87365>] kernel_init_freeable+0x1a5/0x249^M
[<ffffffff81d86a35>] ? set_debug_rodata+0x12/0x12^M
[<ffffffff816dc19e>] kernel_init+0xe/0x110^M
[<ffffffff816e93bf>] ret_from_fork+0x1f/0x40^M
[<ffffffff816dc190>] ? rest_init+0x80/0x80^M
The reason for the panic is wrong value of __max_logical_packages,
which lets logical_package_map uninitialized and the uncore code
relying on this map being properly initialized (maybe we should
add some safety checks there as well).
The __max_logical_packages is computed as:
DIV_ROUND_UP(total_cpus, ncpus);
- ncpus being number of cores
With above BIOS setup we get total_cpus == 16 which set
__max_logical_packages to 2 (ncpus is 12).
Once topology_update_package_map processes CPU with logical
pkg over 2 we display above messages and fail to initialize
the physical_to_logical_pkg map, which makes the uncore code
crash.
The fix is to remove logical_package_map bitmap completely
and keep and update the logical_packages number instead.
After we enumerate all the present CPUs, we check if the
enumerated logical packages count is within its computed
maximum from BIOS data.
If it's not the case, we set this maximum to the new enumerated
value and freeze any new addition of logical packages.
The freeze is because lot of init code like uncore/rapl/cqm
depends on having maximum logical package value set to allocate
their data, so we can't change it later on.
Prarit Bhargava tested the patch and confirms that it solves
the problem:
From dmidecode:
Core Count: 24
Core Enabled: 24
Thread Count: 48
Orig kernel boot log:
[ 0.464981] smpboot: Max logical packages: 19
[ 0.469861] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.477261] smpboot: APIC(40) Converting physical 1 to logical package 1
[ 0.484760] smpboot: APIC(80) Converting physical 2 to logical package 2
[ 0.492258] smpboot: APIC(c0) Converting physical 3 to logical package 3
1. nr_cpus=8, should stop enumerating in package 0:
[ 0.533664] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.539596] smpboot: Max logical packages: 19
2. max_cpus=8, should still enumerate all packages:
[ 0.526494] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.532428] smpboot: APIC(40) Converting physical 1 to logical package 1
[ 0.538456] smpboot: APIC(80) Converting physical 2 to logical package 2
[ 0.544486] smpboot: APIC(c0) Converting physical 3 to logical package 3
[ 0.550524] smpboot: Max logical packages: 19
3. nr_cpus=49 ( 2 socket + 1 core on 3rd socket), should stop enumerating in
package 2:
[ 0.521378] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.527314] smpboot: APIC(40) Converting physical 1 to logical package 1
[ 0.533345] smpboot: APIC(80) Converting physical 2 to logical package 2
[ 0.539368] smpboot: Max logical packages: 19
4. maxcpus=49, should still enumerate all packages:
[ 0.525591] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.531525] smpboot: APIC(40) Converting physical 1 to logical package 1
[ 0.537547] smpboot: APIC(80) Converting physical 2 to logical package 2
[ 0.543579] smpboot: APIC(c0) Converting physical 3 to logical package 3
[ 0.549624] smpboot: Max logical packages: 19
5. kdump (nr_cpus=1) works as well.
Reported-by: Frank Ramsay <framsay@redhat.com>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Prarit Bhargava <prarit@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160815101700.GA30090@krava
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Per NVMe-over-Fabrics 1.0 spec, sqsize is represented as
a 0-based value.
Also per spec, the RDMA binding values shall be set
to sqsize, which makes hsqsize 0-based values.
Thus, the sqsize during NVMf connect() is now:
[root@fedora23-fabrics-host1 for-48]# dmesg
[ 318.720645] nvme_fabrics: nvmf_connect_admin_queue(): sqsize for
admin queue: 31
[ 318.720884] nvme nvme0: creating 16 I/O queues.
[ 318.810114] nvme_fabrics: nvmf_connect_io_queue(): sqsize for i/o
queue: 127
Finally, current interpretation implies hrqsize is 1's based
so set it appropriately.
Reported-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Upon admin queue connect(), the rdma qp was being
set based on NVMF_AQ_DEPTH. However, the fabrics layer was
using the sqsize field value set for I/O queues for the admin
queue, which threw the nvme layer and rdma layer off-whack:
root@fedora23-fabrics-host1 nvmf]# dmesg
[ 3507.798642] nvme_fabrics: nvmf_connect_admin_queue():admin sqsize
being sent is: 128
[ 3507.798858] nvme nvme0: creating 16 I/O queues.
[ 3507.896407] nvme nvme0: new ctrl: NQN "nullside-nqn", addr
192.168.1.3:4420
Thus, to have a different admin queue value, we use
NVMF_AQ_DEPTH for connect() and RDMA private data
as the minimum depth specified in the NVMe-over-Fabrics 1.0 spec
(and in that RDMA private data we treat hrqsize as 1's-based
value, per current understanding of the fabrics spec).
Reported-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Jay Freyensee <james_p_freyensee@linux.intel.com>
Reviewed-by: Daniel Verkamp <daniel.verkamp@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
* pm-sleep:
PM / hibernate: Fix rtree_next_node() to avoid walking off list ends
x86/power/64: Use __pa() for physical address computation
PM / sleep: Update some system sleep documentation
Pull networking fixes from David Miller:
1) Buffers powersave frame test is reversed in cfg80211, fix from Felix
Fietkau.
2) Remove bogus WARN_ON in openvswitch, from Jarno Rajahalme.
3) Fix some tg3 ethtool logic bugs, and one that would cause no
interrupts to be generated when rx-coalescing is set to 0. From
Satish Baddipadige and Siva Reddy Kallam.
4) QLCNIC mailbox corruption and napi budget handling fix from Manish
Chopra.
5) Fix fib_trie logic when walking the trie during /proc/net/route
output than can access a stale node pointer. From David Forster.
6) Several sctp_diag fixes from Phil Sutter.
7) PAUSE frame handling fixes in mlxsw driver from Ido Schimmel.
8) Checksum fixup fixes in bpf from Daniel Borkmann.
9) Memork leaks in nfnetlink, from Liping Zhang.
10) Use after free in rxrpc, from David Howells.
11) Use after free in new skb_array code of macvtap driver, from Jason
Wang.
12) Calipso resource leak, from Colin Ian King.
13) mediatek bug fixes (missing stats sync init, etc.) from Sean Wang.
14) Fix bpf non-linear packet write helpers, from Daniel Borkmann.
15) Fix lockdep splats in macsec, from Sabrina Dubroca.
16) hv_netvsc bug fixes from Vitaly Kuznetsov, mostly to do with VF
handling.
17) Various tc-action bug fixes, from CONG Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits)
net_sched: allow flushing tc police actions
net_sched: unify the init logic for act_police
net_sched: convert tcf_exts from list to pointer array
net_sched: move tc offload macros to pkt_cls.h
net_sched: fix a typo in tc_for_each_action()
net_sched: remove an unnecessary list_del()
net_sched: remove the leftover cleanup_a()
mlxsw: spectrum: Allow packets to be trapped from any PG
mlxsw: spectrum: Unmap 802.1Q FID before destroying it
mlxsw: spectrum: Add missing rollbacks in error path
mlxsw: reg: Fix missing op field fill-up
mlxsw: spectrum: Trap loop-backed packets
mlxsw: spectrum: Add missing packet traps
mlxsw: spectrum: Mark port as active before registering it
mlxsw: spectrum: Create PVID vPort before registering netdevice
mlxsw: spectrum: Remove redundant errors from the code
mlxsw: spectrum: Don't return upon error in removal path
i40e: check for and deal with non-contiguous TCs
ixgbe: Re-enable ability to toggle VLAN filtering
ixgbe: Force VLNCTRL.VFE to be set in all VMDq paths
...
Cong Wang says:
====================
net_sched: tc action fixes and updates
This patchset fixes a few regressions caused by the previous
code refactor and more. Thanks to Jamal for catching them!
Note, patch 3/7 and 4/7 are not strictly necessary for this patchset,
I just want to carry them together.
---
v4: adjust an indention for Jamal
add two more patches
v3: avoid list for fast path, suggested by Jamal
v2: replace flex_array with regular dynamic array
keep tcf_action_stats_update() in act_api.h
fix macro typos found by Amir
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The act_police uses its own code to walk the
action hashtable, which leads to that we could
not flush standalone tc police actions, so just
switch to tcf_generic_walker() like other actions.
(Joint work from Roman and Cong.)
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jamal reported a crash when we create a police action
with a specific index, this is because the init logic
is not correct, we should always create one for this
case. Just unify the logic with other tc actions.
Fixes: a03e6fe569 ("act_police: fix a crash during removal")
Reported-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As pointed out by Jamal, an action could be shared by
multiple filters, so we can't use list to chain them
any more after we get rid of the original tc_action.
Instead, we could just save pointers to these actions
in tcf_exts, since they are refcount'ed, so convert
the list to an array of pointers.
The "ugly" part is the action API still accepts list
as a parameter, I just introduce a helper function to
convert the array of pointers to a list, instead of
relying on the C99 feature to iterate the array.
Fixes: a85a970af2 ("net_sched: move tc_action into tcf_common")
Reported-by: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This list_del() for tc action is not needed actually,
because we only use this list to chain bulk operations,
therefore should not be carried for latter operations.
Fixes: ec0595cc44 ("net_sched: get rid of struct tcf_common")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After refactoring tc_action into tcf_common, we no
longer need to cleanup temporary "actions" in list,
they are permanently stored in the hashtable.
Fixes: a85a970af2 ("net_sched: move tc_action into tcf_common")
Reported-by: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2016-08-16
This series contains fixes to e1000e, igb, ixgbe and i40e.
Kshitiz Gupta provides a fix for igb to resolve the PHY delay compensation
math in several functions.
Jarod Wilson provides a fix for e1000e which had to broken up into 2
patches, first is prepares the driver for expanding the list of NICs
that have occasional ~10 hour clock jumps when being used for PTP.
Second patch actually fixes i218 silicon which has been experiencing
the clock jumps while using PTP.
Alex provides 2 patches for ixgbe now that he is back at Intel. First
fixes setting VLNCTRL.VFE bit, which was left unchanged in earlier patches
which resulted in disabling VLAN filtering for all the VFs. Second
corrects the support for disabling the VLAN tag filtering via the
feature bit.
Lastly, David fixes i40e which was causing a kernel panic when
non-contiguous traffic classes or traffic classes not starting with TC0,
were configured on a link partner switch. To fix this, changed the
logic when determining the total number of TCs enabled.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Pirko says:
====================
mlxsw: IPv4 UC router fixes
Ido says:
Patches 1-3 fix a long standing problem in the driver's init sequence,
which manifests itself quite often when routing daemons try to configure
an IP address on registered netdevs that don't yet have an associated
vPort.
Patches 4-9 add missing packet traps for the router to work properly and
also fix ordering issue following the recent changes to the driver's init
sequence.
The last patch isn't related to the router, but fixes a general problem
in which under certain conditions packets aren't trapped to CPU.
v1->v2:
- Change order of patch 7
- Add patch 6 following Ilan's comment
- Add patchset name and cover letter
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When packets enter the device they are classified to a priority group
(PG) buffer based on their PCP value. After their egress port and
traffic class are determined they are moved to the switch's shared
buffer and await transmission, if:
(Ingress{Port}.Usage < Thres && Ingress{Port,PG}.Usage < Thres &&
Egress{Port}.Usage < Thres && Egress{Port,TC}.Usage < Thres)
||
(Ingress{Port}.Usage < Min || Ingress{Port,PG} < Min ||
Egress{Port}.Usage < Min || Egress{Port,TC}.Usage < Min)
Packets scheduled to transmission through CPU port (trapped to CPU) use
traffic class 7, which has a zero maximum and minimum quotas. However,
when such packets arrive from PG 0 they are admitted to the shared
buffer as PG 0 has a non-zero minimum quota.
Allow all packets to be trapped to the CPU - regardless of the PG they
were classified to - by assigning a 10KB minimum quota for CPU port and
TC7.
Fixes: 8e8dfe9fdf ("mlxsw: spectrum: Add IEEE 802.1Qaz ETS support")
Reported-by: Tamir Winetroub <tamirw@mellanox.com>
Tested-by: Tamir Winetroub <tamirw@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before destroying the 802.1Q FID we should first remove the VID-to-FID
mapping. This makes mlxsw_sp_fid_destroy() symmetric with regards to
mlxsw_sp_fid_create().
Fixes: 14d39461b3 ("mlxsw: spectrum: Use per-FID struct for the VLAN-aware bridge")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While going over the code I noticed we are missing two rollbacks in the
port's creation error path. Add them and adjust the place of one of them
in the port's removal sequence so that both are symmetric.
Fixes: 56ade8fe3f ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ralue pack function needs to set op, otherwise it is 0 for add always.
Fixes: d5a1c749d2 ("mlxsw: reg: Add Router Algorithmic LPM Unicast Entry Register definition")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
One of the conditions to generate an ICMP Redirect Message is that "the
packet is being forwarded out the same physical interface that it was
received from" (RFC 1812).
Therefore, we need to be able to trap such packets and let the kernel
decide what to do with them.
For each RIF, enable the loop-back filter, which will raise the LBERROR
trap whenever the ingress RIF equals the egress RIF.
Fixes: 99724c18fc ("mlxsw: spectrum: Introduce support for router interfaces")
Reported-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the following traps:
1) MTU Error: Trap packets whose size is bigger than the egress RIF's
MTU. If DF bit isn't set, traffic will continue to be routed in slow
path.
2) TTL Error: Trap packets whose TTL expired. This allows traceroute to
work properly.
3) OSPF packets.
Fixes: 7b27ce7bb9 ("mlxsw: spectrum: Add traps needed for router implementation")
Signed-off-by: Elad Raz <eladr@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit bbf2a4757b ("mlxsw: spectrum: Initialize ports at the end of
init sequence") moved ports initialization to the end of the init
sequence, which means ports are the first to be removed during fini.
Since the FDB delayed work is still active when ports are removed it's
possible for it to process FDB notifications of inactive ports,
resulting in a warning message.
Fix that by marking ports as inactive only after unregistering them. The
NETDEV_UNREGISTER event will invoke bridge's driver port removal
sequence that will cause the FDB (and FDB notifications) to be flushed.
Fixes: bbf2a4757b ("mlxsw: spectrum: Initialize ports at the end of init sequence")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After registering a netdevice it's possible for user space applications
to configure an IP address on it. From the driver's perspective, this
means a router interface (RIF) should be created for the PVID vPort.
Therefore, we must create the PVID vPort before registering the
netdevice.
Fixes: 99724c18fc ("mlxsw: spectrum: Introduce support for router interfaces")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, when device configuration fails we emit errors to the kernel
log despite the fact we already get these from the EMAD transaction
layer, so remove them.
In addition to being unnecessary, removing these error messages will
allow us to reuse mlxsw_sp_port_add_vid() to create the PVID vPort
before registering the netdevice.
Fixes: 99724c18fc ("mlxsw: spectrum: Introduce support for router interfaces")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When removing a VLAN filter from the device we shouldn't return upon the
first error we encounter, as otherwise we'll have resources that will
never be freed nor used.
Instead, we should keep trying to free as much resources as possible in
a best effort mode.
Remove the error message as well, since we already get these from the
EMAD transaction code.
Fixes: 99724c18fc ("mlxsw: spectrum: Introduce support for router interfaces")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
inet_lookup_listener() and inet6_lookup_listener() no longer
take a reference on the found listener.
This minimal patch adds back the refcounting, but we might do
this differently in net-next later.
Fixes: 3b24d854cb ("tcp/dccp: do not touch listener sk_refcnt under synflood")
Reported-and-tested-by: Denys Fedoryshchenko <nuclearcat@nuclearcat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We should report the over quota message to the right net namespace
instead of the init netns.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull power supply fixes from Sebastian Reichel.
* tag 'for-v4.8-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power_supply: tps65217-charger: fix missing platform_set_drvdata()
power: reset: hisi-reboot: Unmap region obtained by of_iomap
power: reset: reboot-mode: fix build error of missing ioremap/iounmap on UM
power: supply: max17042_battery: fix model download bug.
As per the GICv3 specification, to power down a processor using GICv3
and allow automatic power-on if an interrupt must be sent to a processor,
software must set Enable to zero for all interrupt groups(by writing
to GICC_CTLR or ICC_IGRPEN{0,1}_EL1/3 as appropriate.
When commit 3708d52fc6 ("irqchip: gic-v3: Implement CPU PM notifier")
was introduced there were no firmware implementations(in particular PSCI)
handling this.
Linux kernel may not be aware of the CPU power state details and might
fail to identify the power states that require quiescing the CPU
interface. Even if it can be aware of those details, it can't determine
which CPU power state have been triggered at the platform level and how
the power control is implemented.
This patch make disabling redistributor and group1 non-secure interrupts
in the power down path and re-enabling of redistributor in the power-up
path conditional. It will be handled in the kernel if and only if the
non-secure accesses are permitted to access and modify control registers.
It is left to the platform implementation otherwise.
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Tested-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
On systems where a single CPU is present, the GIC may not support
having SGIs delivered to a target list. In that case, we use the
self-SGI mechanism to allow the interrupt to be delivered locally.
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
This fixes a long-standing bug that caused a flood of messages like:
"md: delaying data-check of md1 until md2 has finished (they share one
or more physical units)"
It can be reproduced like this:
1. Create at least 3 raid1 arrays on a pair of disks, each on different
partitions.
2. Request a sync operation like 'check' or 'repair' on 2 arrays by
writing to their md/sync_action attribute files. One operation should
start and one should be delayed and a message like the above will be
printed.
3. Issue a write to the third array. Each write will cause 2 copies of
the message to be printed.
This happens when wake_up(&resync_wait) is called, usually by
md_check_recovery(). Then the delayed sync thread again prints the
message and is put to sleep. This patch adds a check in md_do_sync() to
prevent printing this message more than once for the same pair of
devices.
Reported-by: Sven Koehler <sven.koehler@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=151801
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
The ret is not needed anymore since we have already
move resync_start into md_do_sync in commit 41a9a0d.
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Literal loads of virtual addresses are subject to runtime relocation when
CONFIG_RELOCATABLE=y, and given that the relocation routines run with the
MMU and caches enabled, literal loads of relocated values performed with
the MMU off are not guaranteed to return the latest value unless the
memory covering the literal is cleaned to the PoC explicitly.
So defer the literal load until after the MMU has been enabled, just like
we do for primary_switch() and secondary_switch() in head.S.
Fixes: 1e48ef7fcc ("arm64: add support for building vmlinux as a relocatable PIE binary")
Cc: <stable@vger.kernel.org> # 4.6+
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Since asm/acpi.h is only included by linux/acpi.h when CONFIG_ACPI is
enabled, disabling the latter leads to the following build error on
arm64:
arch/arm64/mm/numa.c: In function ‘arm64_numa_init’:
arch/arm64/mm/numa.c:395:24: error: ‘arm64_acpi_numa_init’ undeclared (first use in this function)
if (!acpi_disabled && !numa_init(arm64_acpi_numa_init))
This patch include the asm/acpi.h explicitly in arch/arm64/mm/numa.c for
the arm64_acpi_numa_init() definition.
Fixes: d8b47fca8c ("arm64, ACPI, NUMA: NUMA support based on SRAT and SLIT")
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Change my email address to kernel.org account instead of Samsung one.
Add Bartlomiej Zolnierkiewicz as a co-maintainer of Maxim and Samsung
PMIC drivers. These are used on many of our boards along with Exynos
SoCs and Samsung R&D Institute Poland can still take care of them.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: linux-samsung-soc@vger.kernel.org
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Kukjin Kim <kgene@kernel.org>
Otherwise, if nfnetlink_log.ko is not loaded, we cannot add rules
to log packets to the userspace when we specify it with arp family,
such as:
# nft add rule arp filter input log group 0
<cmdline>:1:1-37: Error: Could not process rule: No such file or
directory
add rule arp filter input log group 0
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We should skip the conntracks that belong to a different namespace,
otherwise other unrelated netns's conntrack entries will be dumped via
/proc/net/nf_conntrack.
Fixes: 56d52d4892 ("netfilter: conntrack: use a single hashtable for all namespaces")
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
At imx6ul_init_machine, it calls imx6ul_pm_init which needs to find
platform device for ocram, but the default populate platform device is at
of_platform_default_populate_init, which is located at arch_initcall_sync,
and called later than arch_initcall (.init_machine is located at that).
So below warning message will be showed during boots up:
imx6q_suspend_init: failed to find ocram device!
imx6_pm_common_init: No DDR LPM support with suspend -19!
Due to lack of ocram device, the suspend mode "mem" which needs ocram to
store suspend routine code is invalid.
This commit populates platform device before imx6ul_pm_init like other
imx6 platforms do, and the suspend mode "mem" can work successfully.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Fixes: 850bea2335 ("arm: Remove unnecessary of_platform_populate with default match table")
Cc: Anson Huang <anson.huang@nxp.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Rob Herring <robh@kernel.org>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The raid0 MD personality does not start a raid0 array with any of its
data devices missing.
dm-raid was removing data/metadata device pairs unconditionally if it
failed to read a superblock off the respective metadata device of such
pair, resulting in failure to start arrays with the raid0 personality.
Avoid removing any data/metadata device pairs in case of raid0
(e.g. lvm2 segment type 'raid0_meta') thus allowing MD to start the
array.
Also, avoid region size validation for raid0.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
cgroup_threadgroup_rwsem is acquired in read mode during process exit
and fork. It is also grabbed in write mode during
__cgroups_proc_write(). I've recently run into a scenario with lots
of memory pressure and OOM and I am beginning to see
systemd
__switch_to+0x1f8/0x350
__schedule+0x30c/0x990
schedule+0x48/0xc0
percpu_down_write+0x114/0x170
__cgroup_procs_write.isra.12+0xb8/0x3c0
cgroup_file_write+0x74/0x1a0
kernfs_fop_write+0x188/0x200
__vfs_write+0x6c/0xe0
vfs_write+0xc0/0x230
SyS_write+0x6c/0x110
system_call+0x38/0xb4
This thread is waiting on the reader of cgroup_threadgroup_rwsem to
exit. The reader itself is under memory pressure and has gone into
reclaim after fork. There are times the reader also ends up waiting on
oom_lock as well.
__switch_to+0x1f8/0x350
__schedule+0x30c/0x990
schedule+0x48/0xc0
jbd2_log_wait_commit+0xd4/0x180
ext4_evict_inode+0x88/0x5c0
evict+0xf8/0x2a0
dispose_list+0x50/0x80
prune_icache_sb+0x6c/0x90
super_cache_scan+0x190/0x210
shrink_slab.part.15+0x22c/0x4c0
shrink_zone+0x288/0x3c0
do_try_to_free_pages+0x1dc/0x590
try_to_free_pages+0xdc/0x260
__alloc_pages_nodemask+0x72c/0xc90
alloc_pages_current+0xb4/0x1a0
page_table_alloc+0xc0/0x170
__pte_alloc+0x58/0x1f0
copy_page_range+0x4ec/0x950
copy_process.isra.5+0x15a0/0x1870
_do_fork+0xa8/0x4b0
ppc_clone+0x8/0xc
In the meanwhile, all processes exiting/forking are blocked almost
stalling the system.
This patch moves the threadgroup_change_begin from before
cgroup_fork() to just before cgroup_canfork(). There is no nee to
worry about threadgroup changes till the task is actually added to the
threadgroup. This avoids having to call reclaim with
cgroup_threadgroup_rwsem held.
tj: Subject and description edits.
Signed-off-by: Balbir Singh <bsingharora@gmail.com>
Acked-by: Zefan Li <lizefan@huawei.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org # v4.2+
Signed-off-by: Tejun Heo <tj@kernel.org>
Change my email address to kernel.org instead of Samsung one for the
purpose of any future contact. The copyrights remain untouched and are
attributed to Samsung.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In commit:
d8152bf85d ("clocksource/drivers/mips-gic-timer: Convert init function to return error")
several return values were added to a void function resulting in the following warnings:
clocksource/mips-gic-timer.c: In function 'gic_clocksource_of_init':
clocksource/mips-gic-timer.c:175:3: warning: 'return' with a value, in function returning void [enabled by default]
clocksource/mips-gic-timer.c:183:4: warning: 'return' with a value, in function returning void [enabled by default]
clocksource/mips-gic-timer.c:190:3: warning: 'return' with a value, in function returning void [enabled by default]
clocksource/mips-gic-timer.c:195:3: warning: 'return' with a value, in function returning void [enabled by default]
clocksource/mips-gic-timer.c:200:3: warning: 'return' with a value, in function returning void [enabled by default]
clocksource/mips-gic-timer.c:211:2: warning: 'return' with a value, in function returning void [enabled by default]
clocksource/mips-gic-timer.c: At top level:
clocksource/mips-gic-timer.c:213:1: warning: comparison of distinct pointer types lacks a cast [enabled by default]
clocksource/mips-gic-timer.c: In function 'gic_clocksource_of_init':
clocksource/mips-gic-timer.c:183:18: warning: ignoring return value of 'PTR_ERR', declared with attribute warn_unused_result [-Wunused-result]
Given that the addition of the return values was intentional, it seems
that the conversion of the containing function from void to int was
simply overlooked.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Fixes: d8152bf85d ("clocksource/drivers/mips-gic-timer: Convert init function to return error")
Link: http://lkml.kernel.org/r/1471429296-9053-3-git-send-email-daniel.lezcano@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I could not figure out why, but GCC cannot prove that the
kona_timer_init() function always initializes its two outputs,
and we get a warning for the use of the 'lsw' variable later,
which is obviously correct.
drivers/clocksource/bcm_kona_timer.c: In function 'kona_timer_init':
drivers/clocksource/bcm_kona_timer.c:119:13: error: 'lsw' may be used uninitialized in this function [-Werror=maybe-uninitialized]
Slightly reordering the loop makes the warning disappear, after
it becomes more obvious to the compiler that the loop is
always entered on the first iteration.
As pointed out by Ray Jui, there is a related problem in the
way we deal with the loop running into the limit, as we just
keep going there with an invalid counter data, so instead we
now propagate a -ETIMEDOUT result to the caller.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bcm-kernel-feedback-list@broadcom.com
Link: http://lkml.kernel.org/r/1471429296-9053-2-git-send-email-daniel.lezcano@linaro.org
Link: https://patchwork.kernel.org/patch/9174261/
Signed-off-by: Ingo Molnar <mingo@kernel.org>
After commit b34f2bc ("arm64: KVM: Make ICC_SRE_EL1 access return the
configured SRE value") we report SRE value to 64-bit guest, but 32-bit
one still handled as RAZ/WI what leads to funny promise we do not keep:
"GICv3: GIC: unable to set SRE (disabled at EL2), panic ahead"
Instead, return the actual value of the ICC_SRE_EL1 register that the
guest should see.
[ Tweaked commit message - Christoffer ]
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
CCN PMUs have no knowledge into VM-related origins of the memory
traffic, therefore can't handle requests for host-only or guest-only
events.
Added appropriate exclusions (they should have been there from the
beginning). This required changing the error code returned, as the
userspace tool only re-negotiates the options (exclude_guest is true by
default) only for EINVAL.
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
XP can provide events from two sources: watchpoints, observing traffic
on device ports and PMU looking at internal buses.
Unfortunately the sysfs definition of the PMU events was requiring
port number (instead of bus number) and direction (the buses are
unidirectional), as these fields were shared with the watchpoint event.
Although it does not introduce a major problem (port can be used as
bus alias and direction is simply ignored for XP PMU events), it's
better to fix it now, before external tools start depending on this
behaviour.
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Commit 1e2a7d7849 ("irqdomain: Don't set type when mapping an IRQ")
moved the trigger configuration call from the irqdomain mapping to
the interrupt being actually requested.
This patch failed to handle the case where we configure a chained
interrupt, which doesn't get requested through the usual path.
In order to solve this, let's call __irq_set_trigger just before
starting the cascade interrupt. Special care must be taken to
make the flow handler stick, as the .irq_set_type method could
have reset it (it doesn't know we're dealing with a chained
interrupt).
Based on an initial patch by Jon Hunter.
Fixes: 1e2a7d7849 ("irqdomain: Don't set type when mapping an IRQ")
Reported-by: John Stultz <john.stultz@linaro.org>
Reported-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Similarily to f005bd7e3b ("clocksource/arm_arch_timer: Force
per-CPU interrupt to be level-triggered"), make sure we can
survive an interrupt that has been misconfigured as edge-triggered
by forcing it to be level-triggered (active low is assumed, but
the GIC doesn't really care whether this is high or low).
Hopefully, the amount of shouting in the kernel log will convince
the user to do something about their firmware.
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
We already have a workaround for Cortex-A57 erratum #852523,
but Cortex-A72 r0p0 to r0p2 do suffer from the same issue
(known as erratum #853709).
Let's document the fact that we already handle this.
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
The code setting XP watchpoint comparator and mask registers should, in
order to be fully compliant with specification, zero one or more most
significant bits of each field. In both L cases it means zeroing bit 63.
The bitmask doing this was wrong, though, zeroing bit 60 instead.
Fortunately, due to a lucky coincidence, this turned out to be fairly
innocent with the existing hardware.
Fixed now.
Cc: stable@vger.kernel.org # 3.17+
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Fuzzing the CCN perf driver revealed a small but definitely dangerous
mistake in the event setup code. When a cycle counter is requested, the
driver should not reconfigure the events bus at all, otherwise it will
corrupt (in most but the simplest cases) its configuration and may end
up accessing XP array out of its bounds and corrupting control
registers.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Cc: stable@vger.kernel.org # 3.17+
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
The "Miscellaneous Node" fell through cracks of node initialisation,
as its ID is shared with HN-I.
This patch treats MN as a special case (which it is), adding separate
validation check for it and pre-defining the node ID in relevant events
descriptions. That way one can simply run:
# perf stat -a -e ccn/mn_ecbarrier/ <workload>
Additionally, direction in the MN pseudo-events XP watchpoint
definitions is corrected to be "TX" (1) as they are defined from the
crosspoint point of view (thus barriers are transmitted from XP to MN).
Cc: stable@vger.kernel.org # 3.17+
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
When converting a gfn to a pfn, we call gfn_to_pfn_prot, which returns
various kinds of error values. It turns out that is_error_pfn() only
returns true when the gfn was found in a memory slot and could somehow
not be used, but it does not return true if the gfn does not belong to
any memory slot.
Change use to is_error_noslot_pfn() which covers both cases.
Note: Since we already check for kvm_is_error_hva(hva) explicitly in the
caller of this function while holding the kvm->srcu lock protecting the
memory slots, this should never be a problem, but nevertheless this
change is warranted as it shows the intention of the code.
Reported-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
blk_set_queue_dying() can be called while another thread is
submitting I/O or changing queue flags, e.g. through dm_stop_queue().
Hence protect the QUEUE_FLAG_DYING flag change with locking.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
GET_ARRAY_INFO counts journal as spare (spare_disks), which is not
accurate. This patch fixes this.
Reported-by: Yi Zhang <yizhan@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
When we're really tight on space, xfs_alloc_ag_vextent_small() can
allocate a block from the AGFL and give it to the caller. Since the
caller is never the AGFL-fixing method, we must remove the OWN_AG
reverse mapping because it will clash with whatever rmap the caller
wants to set up. This bug was discovered by running generic/299
repeatedly.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Pull virtio/vhost fixes from Michael Tsirkin:
- test fixes
- a vsock fix
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
tools/virtio: add dma stubs
vhost/test: fix after swiotlb changes
vhost/vsock: drop space available check for TX vq
ringtest: test build fix
Pull s390 fixes from Martin Schwidefsky:
"A couple of bug fixes, minor cleanup and a change to the default
config"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/dasd: fix failing CUIR assignment under LPAR
s390/pageattr: handle numpages parameter correctly
s390/dasd: fix hanging device after clear subchannel
s390/qdio: avoid reschedule of outbound tasklet once killed
s390/qdio: remove checks for ccw device internal state
s390/qdio: fix double return code evaluation
s390/qdio: get rid of spin_lock_irqsave usage
s390/cio: remove subchannel_id from ccw_device_private
s390/qdio: obtain subchannel_id via ccw_device_get_schid()
s390/cio: stop using subchannel_id from ccw_device_private
s390/config: make the vector optimized crc function builtin
s390/lib: fix memcmp and strstr
s390/crc32-vx: Fix checksum calculation for small sizes
s390: clarify compressed image code path
Use a special read-only iomap_ops implementation to support fiemap on
the attr fork.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We'll never get nimap == 0 for a successful return from xfs_bmapi_read,
so don't try to handle it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
By bassing through an -ENOENT, similar to the old XFS implementation of
FIEMAP_FLAG_XATTR.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[hch: split from a larger patch]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The flag is checked as supported, but then we do an unconditional
sync of the file, regardless of whether the flag is set or not. Make
the sync conditional on having the FIEMAP_FLAG_SYNC flag set.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
iov_iter_copy_from_user_atomic disables page faults internally, no need to
do it around the call. This also brings the iomap code in line with
the original filemap version.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This catches up with commit 2457ae ("mm: non-atomically mark page
accessed during page cache allocation where possible"), which
moved the initial access marking into the pagecache allocator.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Track the number of blocks used for the rmapbt in the AGF. When we
get to the AG reservation code we need this counter to quickly
make our reservation during mount.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When we do DAX IO, we try to invalidate the entire page cache held
on the file. This is incorrect as it will trash the entire mapping
tree that now tracks dirty state in exceptional entries in the radix
tree slots.
What we are trying to do is remove cached pages (e.g from reads
into holes) that sit in the radix tree over the range we are about
to write to. Hence we should just limit the invalidation to the
range we are about to overwrite.
Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The space reservations was without an explaination in commit
"Add error reporting calls in error paths that return EFSCORRUPTED"
back in 2003. There is no reason to reserve disk blocks in the
transaction when allocating blocks for delalloc space as we already
reserved the space when creating the delalloc extent.
With this fix we stop running out of the reserved pool in
generic/229, which has happened for long time with small blocksize
file systems, and has increased in severity with the new buffered
write path.
[ dchinner: we still need to pass the block reservation into
xfs_bmapi_write() to ensure we don't deadlock during AG selection.
See commit dbd5c8c ("xfs: pass total block res. as total
xfs_bmapi_write() parameter") for more details on why this is
necessary. ]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The buffer I/O accounting mechanism tracks async buffers under I/O. As
an optimization, the buffer I/O count is incremented only once on the
first async I/O for a given hold cycle of a buffer and decremented once
the buffer is released to the LRU (or freed).
xfs_buf_ioacct_dec() has an ASSERT() check for an XBF_ASYNC buffer, but
we have one or two corner cases where a buffer can be submitted for I/O
multiple times via different methods in a single hold cycle. If an async
I/O occurs first, the I/O count is incremented. If a sync I/O occurs
before the hold count drops, XBF_ASYNC is cleared by the time the I/O
count is decremented.
Remove the async assert check from xfs_buf_ioacct_dec() as this is a
perfectly valid scenario. For the purposes of I/O accounting, we really
only care about the buffer async state at I/O submission time.
Discovered-and-analyzed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The i40e driver was causing a kernel panic when
non-contiguous Traffic Classes, or Traffic Classes not
starting with TC0, were configured on a link partner switch.
i40e does not support non-contiguous TCs.
To fix this, the patch changes the logic when determining
the total number of TCs enabled. Before, this would use the
highest TC number enabled and assume that all TCs below it were
also enabled. Now, we create a bitmask of enabled TCs and scan
it to determine not only the number of TCs, but also if the set
of enabled TCs starts at zero and is contiguous. If not, then
DCB is disabled by only returning one TC.
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
attempt_restore_of_faulty_devices() is limited to 64 when it should support
the new maximum of 253 when identifying any failed devices. It clears any
revivable devices via an MD personality hot remove and add cylce to allow
for their recovery.
Address by using existing functions to retrieve and update all failed
devices' bitfield members in the dm raid superblocks on all RAID devices
and check for any devices to clear in it.
Whilst on it, don't call attempt_restore_of_faulty_devices() for any MD
personality not providing disk hot add/remove methods (i.e. raid0 now),
because such personalities don't support reviving of failed disks.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Back when I submitted the GSO code I messed up and dropped the support for
disabling the VLAN tag filtering via the feature bit. This patch
re-enables the use of the NETIF_F_HW_VLAN_CTAG_FILTER to enable/disable the
VLAN filtering independent of toggling promiscuous mode.
Fixes: b83e30104b ("ixgbe/ixgbevf: Add support for GSO partial")
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
'lvchange --refresh RaidLV' causes a mapped device suspend/resume cycle
aiming at device restore and resync after transient device failures. This
failed because flag RT_FLAG_RS_RESUMED was always cleared in the suspend path,
thus the device restore wasn't performed in the resume path.
Solve by removing RT_FLAG_RS_RESUMED from the suspend path and resume
unconditionally. Also, remove superfluous comment from raid_resume().
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When I was adding the code for enabling VLAN promiscuous mode with SR-IOV
enabled I had inadvertently left the VLNCTRL.VFE bit unchanged as I has
assumed there was code in another path that was setting it when we enabled
SR-IOV. This wasn't the case and as a result we were just disabling VLAN
filtering for all the VFs apparently.
Also the previous patches were always clearing CFIEN which was always set
to 0 by the hardware anyway so I am dropping the redundant bit clearing.
Fixes: 1636956491 ("ixgbe: Add support for VLAN promiscuous with SR-IOV")
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
On LVM2 conversions via lvconvert(8), the target keeps mapped devices in
frozen state when requesting RAID devices be resynchronized. This
applies to e.g. adding legs to a raid1 device or taking over from raid0
to raid4 when the rebuild flag's set on the new raid1 legs or the added
dedicated parity stripe.
Also, fix frozen recovery for reshaping as well.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Instead of passing negative flags like PCI_IRQ_NOMSI to prevent use of
certain interrupt types, pass positive flags like PCI_IRQ_LEGACY,
PCI_IRQ_MSI, etc., to specify the acceptable interrupt types.
This is based on a number of pending driver conversions that just happend
to be a whole more obvious to read this way, and given that we have no
users in the tree yet it can still easily be done.
I've also added a PCI_IRQ_ALL_TYPES catchall to keep the case of accepting
all interrupt types very simple.
[bhelgaas: changelog, fix PCI_IRQ_AFFINITY doc typo, remove mention of
PCI_IRQ_NOLEGACY]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Alexander Gordeev <agordeev@redhat.com>
Pull pin control fixes from Linus Walleij:
"Here are a few pin control fixes for the v4.8 series, nothing special
about them:
- Add the missing <linux/io.h> header to the Intel Merrifield driver
to get rid of build mess.
- Drop two instances of pinctrl_unregister() called for drivers using
devm_* resource management.
- Remove the default debounce time for the AMD driver"
* tag 'pinctrl-v4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: intel: merrifield: Add missed header
pinctrl/amd: Remove the default de-bounce time
pinctrl: pistachio: Drop pinctrl_unregister for devm_ registered device
pinctrl: meson: Drop pinctrl_unregister for devm_ registered device
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Fix occasional decoding errors when tracing system-wide with
Intel PT (Adrian Hunter)
- Fix ip compression in Intel PT for some specific packet types not
present on current hardware (Adrian Hunter)
- Fix annotation of objects with debuginfo files (Anton Blanchard)
- Fix build on Fedora Rawhide (25) wrt using the right header to
get the major() & minor() definitions in the jitdump code, now
it is deprecated getting those using sys/types.h, one has to use
sys/sysmacros.h (Arnaldo Carvalho de Melo)
- Sync arm64/s390 kvm related header files (Arnaldo Carvalho de Melo)
- Check for dup and fdopen failures in 'perf probe' (Colin Ian King,
Arnaldo Carvalho de Melo)
- Fix showing callchains in pipe mode, i.e.
perf record -g -o - workload | perf script
now shows callchains (He Kuang)
- Show proper message when the scripts directory points to some
invalid location in 'perf script --list' (He Kuang)
- Fix 'perf mem -t store' to record 'cpu/mem-stores/P' events
again (Jiri Olsa)
- Fix ppc64le build failure when libelf is not present (Ravi Bangoria)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I've got reports that the Intel I-218V NIC in Intel NUC5i5RYH systems used
as a PTP slave experiences random ~10 hour clock jumps, which are resolved
if the same workaround for the 82574 and 82583 is employed, so set the
appropriate flag2 in e1000_pch_lpt_info too.
Reported-by: Rupesh Patel <rupatel@redhat.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This is prepatory work for an expanding list of adapter families that have
occasional ~10 hour clock jumps when being used for PTP. Factor out the
sanitization function and convert to using a feature (bug) flag, per
suggestion from Jesse Brandeburg.
Littering functional code with device-specific checks is much messier than
simply checking a flag, and having device-specific init set flags as needed.
There are probably a number of other cases in the e1000e code that
could/should be converted similarly.
Suggested-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Fix PHY delay compensation math in igb_ptp_tx_hwtstamp() and
igb_ptp_rx_rgtstamp. Add PHY delay compensation in
igb_ptp_rx_pktstamp().
In the IGB driver, there are two functions that retrieve timestamps
received by the PHY - igb_ptp_rx_rgtstamp() and igb_ptp_rx_pktstamp().
The previous commit only changed igb_ptp_rx_rgtstamp(), and the change
was incorrect.
There are two instances in which PHY delay compensations should be
made:
- Before the packet transmission over the PHY, the latency between
when the packet is timestamped and transmission of the packets,
should be an add operation, but it is currently a subtract.
- After the packets are received from the PHY, the latency between
the receiving and timestamping of the packets should be a subtract
operation, but it is currently an add.
Signed-off-by: Kshitiz Gupta <kshitiz.gupta@ni.com>
Fixes: 3f544d2 (igb: adjust ptp timestamps for tx/rx latency)
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When a guest wants to map a device-ID/event-ID combination that is
already mapped, we may end up in a situation where an LPI is never
"put", thus never being freed.
Since the GICv3 spec says that mapping an already mapped LPI is
UNPREDICTABLE, lets just bail out early in this situation to avoid
any potential leaks.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Commit 288dab8a35 ("block: add a separate operation type for secure
erase") split REQ_OP_SECURE_ERASE from REQ_OP_DISCARD without considering
all the places REQ_OP_DISCARD was being used to mean either. Fix those.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 288dab8a35 ("block: add a separate operation type for secure erase")
Signed-off-by: Jens Axboe <axboe@fb.com>
Prior to this patch, the retrans value was set at 5, meaning that we
could see a maximum retransmission timeout value of more than 6 minutes.
That's a tad high for NFSv3 where the protocol does allow the server to
drop requests at any time.
Since this is a data channel, let's just set retrans to 0, and the default
timeout to 60s. The user can continue to adjust these defaults using the
dataserver_retrans and dataserver_timeo module parameters.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We should allow retrans=0 as just meaning that every timeout is a major
timeout, and that there is no increment in the timeout value.
For instance, this means that we would allow TCP users to specify a
flat timeout value of 60s, by specifying "timeo=600,retrans=0" in their
mount option string.
Siged-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Avoid dereferencing the queue pointer in nvmet_rdma_release_queue_work()
after it has been freed by nvmet_rdma_free_queue().
Fixes: d8f7750a08 ("nvmet-rdma: Correctly handle RDMA device hot removal")
Signed-off-by: Vincent Stehlé <vincent.stehle@intel.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
commit cbaadf0f90 ("ASoC: atmel_ssc_dai: refactor the startup and
shutdown") refactored code such that the SSC is reset on every
startup; this breaks duplex audio (e.g. first start audio playback,
then start record, causing the playback to stop/hang)
Fixes: cbaadf0f90 (ASoC: atmel_ssc_dai: refactor the startup and shutdown)
Signed-off-by: Christoph Huber <c.huber@bct-electronic.com>
Signed-off-by: Peter Meerwald-Stadler <p.meerwald@bct-electronic.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
rtree_next_node() walks the linked list of leaf nodes to find the next
block of pages in the struct memory_bitmap. If it walks off the end of
the list of nodes, it walks the list of memory zones to find the next
region of memory. If it walks off the end of the list of zones, it
returns false.
This leaves the struct bm_position's node and zone pointers pointing
at their respective struct list_heads in struct mem_zone_bm_rtree.
memory_bm_find_bit() uses struct bm_position's node and zone pointers
to avoid walking lists and trees if the next bit appears in the same
node/zone. It handles these values being stale.
Swap rtree_next_node()s 'step then test' to 'test-next then step',
this means if we reach the end of memory we return false and leave
the node and zone pointers as they were.
This fixes a panic on resume using AMD Seattle with 64K pages:
[ 6.868732] Freezing user space processes ... (elapsed 0.000 seconds) done.
[ 6.875753] Double checking all user space processes after OOM killer disable... (elapsed 0.000 seconds)
[ 6.896453] PM: Using 3 thread(s) for decompression.
[ 6.896453] PM: Loading and decompressing image data (5339 pages)...
[ 7.318890] PM: Image loading progress: 0%
[ 7.323395] Unable to handle kernel paging request at virtual address 00800040
[ 7.330611] pgd = ffff000008df0000
[ 7.334003] [00800040] *pgd=00000083fffe0003, *pud=00000083fffe0003, *pmd=00000083fffd0003, *pte=0000000000000000
[ 7.344266] Internal error: Oops: 96000005 [#1] PREEMPT SMP
[ 7.349825] Modules linked in:
[ 7.352871] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G W I 4.8.0-rc1 #4737
[ 7.360512] Hardware name: AMD Overdrive/Supercharger/Default string, BIOS ROD1002C 04/08/2016
[ 7.369109] task: ffff8003c0220000 task.stack: ffff8003c0280000
[ 7.375020] PC is at set_bit+0x18/0x30
[ 7.378758] LR is at memory_bm_set_bit+0x24/0x30
[ 7.383362] pc : [<ffff00000835bbc8>] lr : [<ffff0000080faf18>] pstate: 60000045
[ 7.390743] sp : ffff8003c0283b00
[ 7.473551]
[ 7.475031] Process swapper/0 (pid: 1, stack limit = 0xffff8003c0280020)
[ 7.481718] Stack: (0xffff8003c0283b00 to 0xffff8003c0284000)
[ 7.800075] Call trace:
[ 7.887097] [<ffff00000835bbc8>] set_bit+0x18/0x30
[ 7.891876] [<ffff0000080fb038>] duplicate_memory_bitmap.constprop.38+0x54/0x70
[ 7.899172] [<ffff0000080fcc40>] snapshot_write_next+0x22c/0x47c
[ 7.905166] [<ffff0000080fe1b4>] load_image_lzo+0x754/0xa88
[ 7.910725] [<ffff0000080ff0a8>] swsusp_read+0x144/0x230
[ 7.916025] [<ffff0000080fa338>] load_image_and_restore+0x58/0x90
[ 7.922105] [<ffff0000080fa660>] software_resume+0x2f0/0x338
[ 7.927752] [<ffff000008083350>] do_one_initcall+0x38/0x11c
[ 7.933314] [<ffff000008b40cc0>] kernel_init_freeable+0x14c/0x1ec
[ 7.939395] [<ffff0000087ce564>] kernel_init+0x10/0xfc
[ 7.944520] [<ffff000008082e90>] ret_from_fork+0x10/0x40
[ 7.949820] Code: d2800022 8b400c21 f9800031 9ac32043 (c85f7c22)
[ 7.955909] ---[ end trace 0024a5986e6ff323 ]---
[ 7.960529] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Here struct mem_zone_bm_rtree's start_pfn has been returned instead of
struct rtree_node's addr as the node/zone pointers are corrupt after
we walked off the end of the lists during mark_unsafe_pages().
This behaviour was exposed by commit 6dbecfd345 ("PM / hibernate:
Simplify mark_unsafe_pages()"), which caused mark_unsafe_pages() to call
duplicate_memory_bitmap(), which uses memory_bm_find_bit() after walking
off the end of the memory bitmap.
Fixes: 3a20cb1779 (PM / Hibernate: Implement position keeping in radix tree)
Signed-off-by: James Morse <james.morse@arm.com>
[ rjw: Subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After we have called dpcm_path_get we should make sure to call
dpcm_path_put on all error paths. This was not happening causing the
allocated widget list to be leaked, this patch corrects this by adding a
dpcm_path_put to the error path.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
1. fix ctx pointer
Use req_ctx which is the ctx for the next job that have
been completed in the lanes instead of the first
completed job rctx, whose completion could have been
called and released.
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1. fix ctx pointer
Use req_ctx which is the ctx for the next job that have
been completed in the lanes instead of the first
completed job rctx, whose completion could have been
called and released.
2. fix digest copy
Use XMM register to copy another 16 bytes sha256 digest
instead of a regular register.
Signed-off-by: Xiaodong Liu <xiaodong.liu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ret is not initialized so it contains garbage. Ensure garbage
is not returned by initializing rc to 0.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
When attempting to build a Debian kernel package, the "scripts/gcc-plugins"
directory does not exist in the output tree unless CONFIG_GCC_PLUGINS=y.
To avoid errors when not defined, this wraps the failing "find" in a config
test.
Reported-by: Frank Paulsen <frobnic+lkml@gmail.com>
Tested-by: Christian Kujau <lists@nerdbynature.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
Commit 7ef9153d9a ("misc: delete bh1780 driver") has removed the
Kconfig option SENSORS_BH1780. Remove the last reference on this
option.
Signed-off-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove the hcd after checking for the xhci last quirks, not before.
This caused a hang on a Alpine Ridge xhci based maching which remove
the whole xhci controller when unplugging the last usb device
CC: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After a device is disconnected, xhci_stop_device() will be invoked
in xhci_bus_suspend().
Also the "disconnect" IRQ will have ISR to invoke
xhci_free_virt_device() in this sequence.
xhci_irq -> xhci_handle_event -> handle_cmd_completion ->
xhci_handle_cmd_disable_slot -> xhci_free_virt_device
If xhci->devs[slot_id] has been assigned to NULL in
xhci_free_virt_device(), then virt_dev->eps[i].ring in
xhci_stop_device() may point to an invlid address to cause kernel
panic.
virt_dev = xhci->devs[slot_id];
:
if (virt_dev->eps[i].ring && virt_dev->eps[i].ring->dequeue)
[] Unable to handle kernel paging request at virtual address 00001a68
[] pgd=ffffffc001430000
[] [00001a68] *pgd=000000013c807003, *pud=000000013c807003,
*pmd=000000013c808003, *pte=0000000000000000
[] Internal error: Oops: 96000006 [#1] PREEMPT SMP
[] CPU: 0 PID: 39 Comm: kworker/0:1 Tainted: G U
[] Workqueue: pm pm_runtime_work
[] task: ffffffc0bc0e0bc0 ti: ffffffc0bc0ec000 task.ti:
ffffffc0bc0ec000
[] PC is at xhci_stop_device.constprop.11+0xb4/0x1a4
This issue is found when running with realtek ethernet device
(0bda:8153).
Signed-off-by: Jim Lin <jilin@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enqueue the first TRB even if full_len is zero.
Without this "adb install <apk>" freezes the system.
Signed-off-by: Alban Browaeys <alban.browaeys@gmail.com>
Fixes: 86065c2719 ("xhci: don't rely on precalculated value of needed trbs in the enqueue loop")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix "Command completion event does not match command" errors by always
handling the command ring stopped events.
The command ring stopped event is generated as a result of aborting
or stopping the command ring with a register write. It is not caused
by a command in the command queue, and thus won't have a matching command
in the comman list.
Solve it by handling the command ring stopped event before checking for a
matching command.
In most command time out cases we abort the command ring, and get
a command ring stopped event. The events command pointer will point at
the current command ring dequeue, which in most cases matches the timed
out command in the command list, and no error messages are seen.
If we instead get a command aborted event before the command ring stopped
event, the abort event will increse the command ring dequeue pointer, and
the following command ring stopped events command pointer will point at the
next, not yet queued command. This case triggered the error message
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Wang says:
====================
mediatek: Fix warning and issue
This patch set fixes the following warning and issues
v1 -> v2: Fix message typos and add coverletter
v2 -> v3: Split from the previous series for submitting bug fixes
as a series targeting 'net'
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Runtime warning occurs if DMA-API debug feature is enabled that would be
raised by pointers passed to DMA API as arguments to inconsistent struct
device objects, so that the patch makes them usage aligned between DMA
operations such as dma_map_*() and dma_unmap_*() to eliminate the warning.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 08ef55c6f2
("net-next: mediatek: fix gigabit and flow control advertisement")
had supported proper flow control settings for GMAC1. But for GMAC0,
1.GMAC0 shares the common logic with GMAC1 inside mtk_phy_link_adjust()
to adapt various settings for the target phy.
2.GMAC0 uses fixed-phy to connect to a builtin gigabit switch with
fixed link speed as commit 0c72c50f6f
("net-next: mediatek: add fixed-phy support") describes.
3.However, fixed-phy doesn't enable SUPPORTED_Pause & SUPPORTED_Asym_Pause
supported flag on default that would cause mtk_phy_link_adjust() not to
enable flow control setting on GMAC0 properly and cause packet dropped
when high traffic.
Due to these reasons, the patch adds SUPPORTED_Pause & SUPPORTED_Asym_Pause
supported flags on fixed-phy used by the driver to have proper handling on
the both GMAC with the shared common logic.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The patch fixes up the incorrect setup of reduced MII (RMII) on GMAC
and adds the supplement for the setup of reverse MII (REVMII) on GMAC
, and rearranges the error handling for invalid PHY argument.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 655ee63cf3 ("scsi constants: command, sense key + additional
sense string") added a "Completed" sense string with key 0xF to
snstext[], but failed to updated the upper bounds check of the sense key
in scsi_sense_key_string().
Fixes: 655ee63cf3 ("[SCSI] scsi constants: command, sense key + additional sense strings")
Cc: <stable@vger.kernel.org> # v3.12+
Signed-off-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The value of temp_level4_pgt is the physical address of the
top-level page directory, so use __pa() to compute it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
In order to successfully decode Intel PT traces, context switch events
are needed from the moment the trace starts. Currently that is ensured
by using the 'immediate' flag which enables the switch event when it is
opened.
However, since commit 86c2786994 ("perf intel-pt: Add support for
PERF_RECORD_SWITCH") that might not always happen. When tracing
system-wide the context switch event is added to the tracking event
which was not set as 'immediate'. Change that so it is.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v4.4+
Fixes: 86c2786994 ("perf intel-pt: Add support for PERF_RECORD_SWITCH")
Link: http://lkml.kernel.org/r/1471245784-22580-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add missing platform_set_drvdata() in tps65217_charger_probe(), otherwise
calling platform_get_drvdata() in remove returns NULL.
This is detected by Coccinelle semantic patch.
Fixes: 3636859b28 ("power_supply: Add support for tps65217-charger")
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
When userspace provides the doorbell address for an MSI to be
injected into the guest, we find a KVM device which feels responsible.
Lets check that this device is really an emulated ITS before we make
real use of the container_of-ed pointer.
[ Moved NULL-pointer check to caller of static function
- Christoffer ]
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Currently we register an ITS device upon userland issuing the CTLR_INIT
ioctl to mark initialization of the ITS as done.
This deviates from the initialization sequence of the existing GIC
devices and does not play well with the way QEMU handles things.
To be more in line with what we are used to, register the ITS(es) just
before the first VCPU is about to run, so in the map_resources() call.
This involves iterating through the list of KVM devices and map each
ITS that we find.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
There are two problems with the current implementation of the MMIO
handlers for the propbaser and pendbaser:
First, the write to the value itself is not guaranteed to be an atomic
64-bit write so two concurrent writes to the structure field could be
intermixed.
Second, because we do a read-modify-update operation without any
synchronization, if we have two 32-bit accesses to separate parts of the
register, we can loose one of them.
By using the atomic cmpxchg64 we should cover both issues above.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Vitaly Kuznetsov says:
====================
hv_netvsc: fixes for VF removal path
Kernel crash is reported after VF is removed and detached from netvsc
device. Turns out we have multiple different (but related) issues on the
VF removal path which I'm trying to address with PATCHes 2-5 of this
series. PATCH1 is required to support the change.
Changes since v1:
- Re-arrange patches in the series to not introduce new issues [David Miller]
- Add PATCH5 which fixes a new issue I discovered while testing.
- Add Haiyang' A-b tags to PATCH1-4
With regards to Stephen's suggestion: I believe that switching to using RCU
and eliminating vf_use_cnt/vf_inject is the right thing to do long-term, we
can either put this on top of this series or do it later in net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Bonding driver sets IFF_BONDING on both master (the bonding device) and
slave (the real NIC) devices and in netvsc_netdev_event() we want to skip
master devices only. Currently, there is an uncertainty when a slave
interface is removed: if bonding module comes first in netdev_chain it
clears IFF_BONDING flag on the netdev and netvsc_netdev_event() correctly
handles NETDEV_UNREGISTER event, but in case netvsc comes first on the
chain it sees the device with IFF_BONDING still attached and skips it. As
we still hold vf_netdev pointer to the device we crash on the next inject.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We're not guaranteed to see NETDEV_REGISTER/NETDEV_UNREGISTER notifications
only once per VF but we increase/decrease module refcount unconditionally.
Check vf_netdev to make sure we don't take/release it twice. We presume
that only one VF per netvsc device may exist.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We reset vf_inject on VF going down (netvsc_vf_down()) but we don't on
VF removal (netvsc_unregister_vf()) so vf_inject stays 'true' while
vf_netdev is already NULL and we're trying to inject packets into NULL
net device in netvsc_recv_callback() causing kernel to crash.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is a deadlock scenario:
- netvsc_vf_up() schedules netvsc_notify_peers() work and quits.
- netvsc_vf_down() runs before netvsc_notify_peers() gets executed. As it
is being executed from netdev notifier chain we hold rtnl lock when we
get here.
- we enter while (atomic_read(&net_device_ctx->vf_use_cnt) != 0) loop and
wait till netvsc_notify_peers() drops vf_use_cnt.
- netvsc_notify_peers() starts on some other CPU but netdev_notify_peers()
will hang on rtnl_lock().
- deadlock!
Instead of introducing additional synchronization I suggest we drop
gwrk.dwrk completely and call NETDEV_NOTIFY_PEERS directly. As we're
acting under rtnl lock this is legitimate.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
struct netvsc_device is not suitable for storing VF information as this
structure is being destroyed on MTU change / set channel operation (see
rndis_filter_device_remove()). Move all VF related stuff to struct
net_device_context which is persistent.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ensure that the inner_protocol is set on transmit so that GSO segmentation,
which relies on that field, works correctly.
This is achieved by setting the inner_protocol in gre_build_header rather
than each caller of that function. It ensures that the inner_protocol is
set when gre_fb_xmit() is used to transmit GRE which was not previously the
case.
I have observed this is not the case when OvS transmits GRE using
lwtunnel metadata (which it always does).
Fixes: 3872035241 ("gre: Use inner_proto to obtain inner header protocol")
Cc: Pravin Shelar <pshelar@ovn.org>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 73cdf0c6ea ("perf symbols: Record text offset in dso
to calculate objdump address") started storing the offset of
the text section for all DSOs:
if (elf_section_by_name(elf, &ehdr, &tshdr, ".text", NULL))
dso->text_offset = tshdr.sh_addr - tshdr.sh_offset;
Unfortunately this breaks debuginfo files, because we need to calculate
the offset of the text section in the associated executable file. As a
result perf annotate returns junk for all debuginfo files.
Fix this by using runtime_ss->elf which should point at the executable
when parsing a debuginfo file.
Signed-off-by: Anton Blanchard <anton@samba.org>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Tested-by: Wang Nan <wangnan0@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # v4.6+
Fixes: 73cdf0c6ea ("perf symbols: Record text offset in dso to calculate objdump address")
Link: http://lkml.kernel.org/r/20160813115533.6de17912@kryten
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull IOMMU fixes from Joerg Roedel:
- Some functions defined in a header file for the mediatek driver were
not marked inline. Fix that oversight.
- Fix a potential crash in the ARM64 dma-mapping code when freeing a
partially initialized domain.
- Another fix for ARM64 dma-mapping to respect IOMMU mapping
constraints when allocating IOVA addresses.
* tag 'iommu-fixes-v4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/dma: Respect IOMMU aperture when allocating
iommu/dma: Don't put uninitialised IOVA domains
iommu/mediatek: Mark static functions in headers inline
Pull EDAC fix from Borislav Petkov:
"A fix to sb_edac correcting channel reporting on Knights Landing"
* tag 'edac_fixes_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC, sb_edac: Fix channel reporting on Knights Landing
ping_v6_sendmsg does not set flowi6_oif in response to
sin6_scope_id or sk_bound_dev_if, so it is not possible to use
these APIs to ping an IPv6 address on a different interface.
Instead, it sets flowi6_iif, which is incorrect but harmless.
Stop setting flowi6_iif, and support various ways of setting oif
in the same priority order used by udpv6_sendmsg.
Tested: https://android-review.googlesource.com/#/c/254470/
Signed-off-by: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Right now, if it's an open of a negative dentry, a race is possible
with several openers who all try to instantiate/rehash the same
dentry and would hit a BUG_ON in d_add.
But in fact if we got a negative dentry in atomic_open, that means
we just revalidated it so no point in talking to MDS at all,
just return ENOENT and make the race go away completely.
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Cc: stable <stable@vger.kernel.org> # 4.7+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Because perf data from pipe do not have a header with evsel attr, we
should not check that and disable symbol_conf.use_callchain. Otherwise,
perf script won't show callchains even if the data stream contains
callchain.
Before:
$ perf record -g -o - uname |perf script
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
uname 1828 182630.186578: 250000 cpu-clock: ..b9499 setup_arg_pages
uname 1828 182630.186850: 250000 cpu-clock: ..83b20 ___might_sleep
uname 1828 182630.187153: 250000 cpu-clock: ..4b6be file_map_prot_ch
...
After:
$ perf record -g -o - uname |perf script
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
uname 1833 182675.927099: 250000 cpu-clock:
ba5520 _raw_spin_lock+0xfe200040 ([kernel.kallsyms])
389dd4 expand_downwards+0xfe200154 ([kernel.kallsyms])
389f34 expand_stack+0xfe200024 ([kernel.kallsyms])
3b957e setup_arg_pages+0xfe20019e ([kernel.kallsyms])
40c80f load_elf_binary+0xfe20042f ([kernel.kallsyms])
...
Signed-off-by: He Kuang <hekuang@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1470309943-153909-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf shows the usage message when perf scripts folder failed to open,
which misleads users to let them think the command is being mistyped.
This patch shows a proper message and guides users to check the
PERF_EXEC_PATH environment variable in that case.
Before:
$ perf script --list
Usage: perf script [<options>]
or: perf script [<options>] record <script> [<record-options>] <command>
or: perf script [<options>] report <script> [script-args]
or: perf script [<options>] <script> [<record-options>] <command>
or: perf script [<options>] <top-script> [script-args]
-l, --list list available scripts
After:
$ perf script --list
open(/home/user/perf-core/scripts) failed.
Check for "PERF_EXEC_PATH" env to set scripts dir.
Signed-off-by: He Kuang <hekuang@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1470309943-153909-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The called of_graph_get_next_endpoint() already decrements the refcount
of the prev node, so it is wrong to do it again in the calling function.
Use the for_each_endpoint_of_node() helper to interate through the
endpoint OF nodes, which already does the right thing and simplifies
the code a bit.
Fixes: 8ccd0d0ca0
(of: add helper for getting endpoint node of specific identifiers)
Cc: stable@vger.kernel.org
Reported-by: David Jander <david@protonic.nl>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>
The driver always assumes that an input device has been created when
reading channel 3. This causes a kernel panic when dereferencing
st->ts_input.
The change was introduced in
commit 84882b0603 ("iio: adc: at91_adc: Add support for touchscreens
without TSMR"). Earlier versions only entered that part of the if-else
statement if only the following flags are set:
AT91_ADC_IER_XRDY | AT91_ADC_IER_YRDY | AT91_ADC_IER_PRDY
Signed-off-by: Anders Darander <anders@chargestorm.se>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This fix was applied to a bunch of omap3 devices including LogicPD
Torpedo, but this got missed since it was new around the same times
the patches were applied. This makes the GPMC parameters match the
Torpedo since they have the same processor PoP memory.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This was applied to a variety of omap3 boards, so it should
probably be applied here. I did not test NAND performance, but
I tested this with UBI to confirm read/write didn't break.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The gpmc ranges property for NAND at CS0 was being overridden by later
includes that defined gpmc ethernet nodes, effectively breaking NAND on
these systems:
omap-gpmc 6e000000.gpmc: /ocp/gpmc@6e000000/nand@0,0 has
malformed 'reg' property
Instead of redefining the NAND range in every such dtsi, define all
currently used ranges in omap3-overo-base.dtsi.
Fixes: 98ce6007ef ("ARM: dts: overo: Support PoP NAND")
Cc: stable <stable@vger.kernel.org> # 4.3
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The gpmc ranges property for NAND at CS0 has been broken since it was
first added.
This currently prevents the nand gpmc child node from being probed:
omap-gpmc 6e000000.gpmc: /ocp/gpmc@6e000000/nand@0,0 has
malformed 'reg' property
and consequently the NAND device from being registered.
Fixes: 98ce6007ef ("ARM: dts: overo: Support PoP NAND")
Cc: stable <stable@vger.kernel.org> # 4.3
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The check for the "elm_id" binding had been removed.
This causes nand boot to fail on boards still using
the old binding. Update the bindings on those boards.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Noticed on Fedora Rawhide:
$ gcc --version
gcc (GCC) 6.1.1 20160721 (Red Hat 6.1.1-4)
$ rpm -q glibc
glibc-2.24.90-1.fc26.x86_64
$
CC /tmp/build/perf/util/jitdump.o
util/jitdump.c: In function 'jit_repipe_code_load':
util/jitdump.c:428:2: error: '__major_from_sys_types' is deprecated:
In the GNU C Library, `major' is defined by <sys/sysmacros.h>.
For historical compatibility, it is currently defined by
<sys/types.h> as well, but we plan to remove this soon.
To use `major', include <sys/sysmacros.h> directly.
If you did not intend to use a system-defined macro `major',
you should #undef it after including <sys/types.h>.
[-Werror=deprecated-declarations]
event->mmap2.maj = major(st.st_dev);
^~~~~
In file included from /usr/include/features.h:397:0,
from /usr/include/sys/types.h:25,
from util/jitdump.c:1:
/usr/include/sys/sysmacros.h:87:1: note: declared here
__SYSMACROS_DEFINE_MAJOR (__SYSMACROS_FST_IMPL_TEMPL)
Fix it following that recomendation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-3majvd0adhfr25rvx4v5e9te@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Uninitialized channel pointer causes segmentation fault when we
call free(channel) during cleanup() with no channels initialized.
This happens when you exit early for usage errors. Initialize
the pointer to NULL when it is declared.
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Tested-by: Gregor Boirie <gregor.boirie@parrot.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Replace the i2c_smbus_read_byte commmands used to retrieve the sensor
data with an i2c_master_recv command.
The smbus read byte method fails because the device does not expect a
stop condition after sending the first byte. When we issue the second
read, we are getting the first byte again. Net effect is that of the 14
bits used for the measurement, the 8 most significant bits are correct,
the lower 6 are not.
None of the smbus read protocols follow the pattern this device requires
(S Addr Rd [A] Data [A] Data NA P), hence the switch to an i2c receive
transaction.
Applicable from original introduction of this driver, but will require
backporting due to churn in the code.
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Acquiring the nvme_ctrl lock before reading ctrl->state in
nvme_change_ctrl_state() should prevent a theoretical invalid state
transition, in the event of two threads racing inside that function.
I haven't been able to observe this happening with the current code, and
the current state machine seems to be simple enough to not be
affected by these invalid transitions, but future modifications could
make it more likely to happen.
Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Reviewed-by: Sagi Grimberg <sag@grimberg.me>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
If /dev/binder is opened and the opener process then e.g. calls execve,
proc->vma_vm_mm will still point to the location of the now-freed
mm_struct. If the process then calls ioctl(binder_fd, ...), the dangling
proc->vma_vm_mm pointer will be compared to current->mm.
Let the binder take a reference to the mm_struct to avoid this.
v2: use the right refcounter
Fixes: a906d6931f ("android: binder: Sanity check at binder ioctl")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: Chen Feng <puck.chen@hisilicon.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In commit 3d838118c6 ("iio: pressure: bmp280: add power management")
For some reason the code in the runtime suspend/resume hooks
got wrong (I suspect in the ambition to cut down boilerplate)
and it seems it was tested without CONFIG_PM and crashes like
so for me:
Unable to handle kernel NULL pointer dereference at virtual address 0000000c
pgd = c0204000
[0000000c] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT SMP ARM
Modules linked in:
CPU: 1 PID: 89 Comm: kworker/1:2 Not tainted
4.7.0-03348-g90dc3680458a-dirty #99
Hardware name: Generic DT based system
Workqueue: pm pm_runtime_work
task: df3c6300 ti: dec8a000 task.ti: dec8a000
PC is at regulator_disable+0x0/0x6c
LR is at bmp280_runtime_suspend+0x3c/0xa4
Dereferencing the BMP280 state container properly fixes the problem,
sorry for screwing up.
Fixes: 3d838118c6 ("iio: pressure: bmp280: add power management")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Select IIO_BUFFER and IIO_TRIGGERED_BUFFER to compile.
Remove IIO_TRIGGER if present since IIO_BUFFER selects it.
Signed-off-by: Alison Schofield <amsfield22@gmail.com>
Cc: Daniel Baluta <daniel.baluta@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The devm_iio_device_register function should not be used if custom
operations must be performed in the remove callback. This patch replaces
the dem_iio_device_register call with a iio_device_register call and
respective iio_device_unregister call in the remove callback.
Fixes: 765550e4d9 ("iio: stx104: Add GPIO support for the Apex Embedded Systems STX104")
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The data buffer for captured mode for the ad799x driver is allocated in the
update_scan_mode() callback. This callback is not set in the iio_info
struct for the ad7791/ad7995/ad7999, which means that the data buffer is
not allocated when a captured transfer is started. As a result the driver
crashes when the first sample is received. To fix this properly set the
update_scan_mode() callback.
Fixes: d8dca33027 ("staging:iio:ad799x: Preallocate sample buffer")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Use the IS_ENABLED() helper macro to ensure that the configfs group is
initialized either when configfs is built-in or when configfs is built as a
module. Otherwise software trigger creation will result in undefined
behaviour when configfs is built as a mdoule since the configfs group for
the trigger is not properly initialized.
Fixes: b662f809d4 ("iio: core: Introduce IIO software triggers")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Daniel Baluta <daniel.baluta@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The 'break' statement after calling ad5933_cmd only breaks out of the
'for' loop, which then unconditionally sets the return value to -EINVAL.
Move the initialisation of 'ret' so we return the correct value.
Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
There is a missing BM_CLPCR_BYP_MMDC_CH0_LPM_HS setting for imx6ul,
without it, the "standby" mode can't work well, the system can't be
resumed.
With this commit, the "standby" mode works well.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Cc: Anson Huang <anson.huang@nxp.com>
Cc: <stable@vger.kernel.org>
Fixes: ee4a5f838c ("ARM: imx: add suspend/resume support for i.mx6ul")
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Rohm BH1780 ambient light sensor has a new driver with extended
functionality (proper runtime PM) in the appropriate framework IIO,
it can be found at:
drivers/iio/light/bh1780.c
The MISC driver symbol CONFIG_SENSORS_BH1780 does not appear in any
defconfigs, so it should safe to delete.
Cc: Hemanth V <hemanthv@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Increase mempool size from 16 to 64 entries. This increase improves
swap on dm-crypt performance.
When swapping to dm-crypt, all available memory is temporarily exhausted
and dm-crypt can only use the mempool reserve.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Both the fence and event alloc are safe to be done without holding the GPU
lock, as they either don't need any locking (fences) or are protected by
their own lock (events).
This solves a bad locking interaction between the submit path and the
recover worker. If userspace manages to exhaust all available events while
the GPU is hung, the submit will wait for events to become available
holding the GPU lock. The recover worker waits for this lock to become
available before trying to recover the GPU which frees up the allocated
events. Essentially both paths are deadlocked until the submit path
times out waiting for available events, failing the submit that could
otherwise be handled just fine if the recover worker had the chance to
bring the GPU back in a working state.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
There is an allocation with GFP_KERNEL flag in mos7840_write(),
while it may be called from interrupt context.
Follow-up for commit 1912528376 ("USB: kobil_sct: fix non-atomic
allocation in write path")
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
There is an allocation with GFP_KERNEL flag in mos7720_write(),
while it may be called from interrupt context.
Follow-up for commit 1912528376 ("USB: kobil_sct: fix non-atomic
allocation in write path")
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
In mlxsw_sp_router_fib4_add_info_destroy(), the fib_entry pointer is used
after it has been freed by mlxsw_sp_fib_entry_destroy(). Use a temporary
variable to fix this.
Fixes: 61c503f976 ("mlxsw: spectrum_router: Implement fib4 add/del switchdev obj ops")
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Jiri Pirko <jiri@mellanox.com>
Acked-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sander reports following splat after netfilter nat bysrc table got
converted to rhashtable:
swapper/0: page allocation failure: order:3, mode:0x2084020(GFP_ATOMIC|__GFP_COMP)
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.0-rc1 [..]
[<ffffffff811633ed>] warn_alloc_failed+0xdd/0x140
[<ffffffff811638b1>] __alloc_pages_nodemask+0x3e1/0xcf0
[<ffffffff811a72ed>] alloc_pages_current+0x8d/0x110
[<ffffffff8117cb7f>] kmalloc_order+0x1f/0x70
[<ffffffff811aec19>] __kmalloc+0x129/0x140
[<ffffffff8146d561>] bucket_table_alloc+0xc1/0x1d0
[<ffffffff8146da1d>] rhashtable_insert_rehash+0x5d/0xe0
[<ffffffff819fcfff>] nf_nat_setup_info+0x2ef/0x400
The failure happens when allocating the spinlock array.
Even with GFP_KERNEL its unlikely for such a large allocation
to succeed.
Thomas Graf pointed me at inet_ehash_locks_alloc(), so in addition
to adding NOWARN for atomic allocations this also makes the bucket-array
sizing more conservative.
In commit 095dc8e0c3 ("tcp: fix/cleanup inet_ehash_locks_alloc()"),
Eric Dumazet says: "Budget 2 cache lines per cpu worth of 'spinlocks'".
IOW, consider size needed by a single spinlock when determining
number of locks per cpu. So with 64 byte per cacheline and 4 byte per
spinlock this gives 32 locks per cpu.
Resulting size of the lock-array (sizeof(spinlock) == 4):
cpus: 1 2 4 8 16 32 64
old: 1k 1k 4k 8k 16k 16k 16k
new: 128 256 512 1k 2k 4k 8k
8k allocation should have decent chance of success even
with GFP_ATOMIC, and should not fail with GFP_KERNEL.
With 72-byte spinlock (LOCKDEP):
cpus : 1 2
old: 9k 18k
new: ~2k ~4k
Reported-by: Sander Eikelenboom <linux@eikelenboom.it>
Suggested-by: Thomas Graf <tgraf@suug.ch>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Putting the periodicity timer in the mirror instances is causing
non-scalable reporting behaviour and missed reporting intervals.
When you recall layouts and/or implement client side mirroring, it
leads to consecutive reports with only a few ms between RPC calls.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Fixes: d0379a5d06 ("pNFS/flexfiles: Support server-supplied...")
Remove unnecessary use of enable/disable callback notifications
and the incorrect more space available check.
The virtio_transport_tx_work handles when the TX virtqueue
has more buffers available.
Signed-off-by: Gerard Garcia <ggarcia@deic.uab.cat>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pull thermal updates from Zhang Rui:
- Fix a race condition when updating cooling device, which may lead to
a situation where a thermal governor never updates the cooling
device. From Michele Di Giorgio.
- Fix a zero division error when disabling the forced idle injection
from the intel powerclamp. From Petr Mladek.
- Add suspend/resume callback for intel_pch_thermal thermal driver.
From Srinivas Pandruvada.
- Another two fixes for clocking cooling driver and hwmon sysfs I/F.
From Michele Di Giorgio and Kuninori Morimoto.
[ Hmm. That suspend/resume callback for intel_pch_thermal doesn't look
like a fix, but I'm letting it slide.. - Linus ]
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
thermal: clock_cooling: Fix missing mutex_init()
thermal: hwmon: EXPORT_SYMBOL_GPL for thermal hwmon sysfs
thermal: fix race condition when updating cooling device
thermal/powerclamp: Prevent division by zero when counting interval
thermal: intel_pch_thermal: Add suspend/resume callback
Recent changes to ptr_ring broke the ringtest
which lacks a likely() stub. Fix it up.
Fixes: 982fb490c2
("ptr_ring: support zero length ring")
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pull m68knommu fix from Greg Ungerer:
"This contains only a single fix for a register corruption problem on
certain types of m68k flat format binaries"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68knommu: fix user a5 register being overwritten
There is only one waiter for the completion, therefore there
is no need to use complete_all(). Let's make that clear by
using complete() instead of complete_all().
The usage pattern of the completion is:
meson_i2c_xfer_msg()
reinit_completion()
...
/* Start the transfer */
...
wait_for_completion_timeout()
Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
There is only one waiter for the completion, therefore there
is no need to use complete_all(). Let's make that clear by
using complete() instead of complete_all().
The usage pattern of the completion is:
brcmstb_send_i2c_cmd()
reinit_completion()
...
/* initiate transfer by setting iic_enable */
...
brcmstb_i2c_wait_for_completion()
Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Reviewed-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
There is only one waiter for the completion, therefore there
is no need to use complete_all(). Let's make that clear by
using complete() instead of complete_all().
The usage pattern of the completion is:
bcm_kona_send_i2c_cmd()
reinit_completion()
...
bcm_kona_i2c_send_cmd_to_ctrl()
...
wait_for_completion_timeout()
Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Reviewed-by: Tim Kryger <tim.kryger@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
There is only one waiter for the completion, therefore there
is no need to use complete_all(). Let's make that clear by
using complete() instead of complete_all().
The usage pattern of the completion is:
bcm_iproc_i2c_xfer_single_msg()
reinit_completion()
...
(activate the transfer)
...
wait_for_completion_timeout()
Signed-off-by: Daniel Wagner <daniel.wagner@bmw-carit.de>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
The "alternative command" feature was introduced with sama5d2 SoCs.
Its purpose is to let the hardware i2c controller automatically send the
STOP condition on the i2c bus at the end of a data transfer.
Without this feature, the i2c driver has to write the 'STOP' bit into the
Control Register so the hardware i2c controller is triggered to send the
STOP condition on the bus.
Using the "alternative command" feature requires to set the transfer data
length into the 8bit DATAL field of the Alternative Command Register.
Hence only data transfers up to 255 bytes can take advantage of the
"alternative command" feature. For greater data transfer sizes, the driver
should use the previous implementation, when the "alternative command"
support was not implemented yet.
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
clk_disable_unprepare() is missed on failure paths in ocores_i2c_probe().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
cros_ec_cmd_xfer returns success status if the command transport
completes successfully, but the execution result is incorrectly ignored.
In many cases, the execution result is assumed to be successful, leading
to ignored errors and operating on uninitialized data.
We've recently introduced the cros_ec_cmd_xfer_status() helper to avoid these
problems. Let's use it.
[Regarding the 'Fixes' tag; there is significant refactoring since the driver's
introduction, but the underlying logical error exists throughout I believe]
Fixes: 9d230c9e4f ("i2c: ChromeOS EC tunnel driver")
Cc: <stable@vger.kernel.org> # 9798ac6d32 mfd: cros_ec: Add cros_ec_cmd_xfer_status() helper
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
We also need to revert the dynamic OF change, so we get a consistent
state again. Otherwise, we might have two devices enabled e.g. after
pinctrl setup fails.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Pull h8300 and unicore32 architecture fixes from Guenter Roeck:
"Two patches to fix h8300 and unicore32 builds.
unicore32 builds have been broken since v4.6. The fix has been
available in -next since March of this year.
h8300 builds have been broken since the last commit window. The fix
has been available in -next since June of this year"
* tag 'fixes-for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
h8300: Add missing include file to asm/io.h
unicore32: mm: Add missing parameter to arch_vma_access_permitted
Pull arm64 fixes from Catalin Marinas:
- support for nr_cpus= command line argument (maxcpus was previously
changed to allow secondary CPUs to be hot-plugged)
- ARM PMU interrupt handling fix
- fix potential TLB conflict in the hibernate code
- improved handling of EL1 instruction aborts (better error reporting)
- removal of useless jprobes code for stack saving/restoring
- defconfig updates
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: defconfig: enable CONFIG_LOCALVERSION_AUTO
arm64: defconfig: add options for virtualization and containers
arm64: hibernate: handle allocation failures
arm64: hibernate: avoid potential TLB conflict
arm64: Handle el1 synchronous instruction aborts cleanly
arm64: Remove stack duplicating code from jprobes
drivers/perf: arm-pmu: Fix handling of SPI lacking "interrupt-affinity" property
drivers/perf: arm-pmu: convert arm_pmu_mutex to spinlock
arm64: Support hard limit of cpu count by nr_cpus
The idea for type_check in dev_get_nest_level() was to count the number
of nested devices of the same type (currently, only macvlan or vlan
devices).
This prevented the false positive lockdep warning on configurations such
as:
eth0 <--- macvlan0 <--- vlan0 <--- macvlan1
However, this doesn't prevent a warning on a configuration such as:
eth0 <--- macvlan0 <--- vlan0
eth1 <--- vlan1 <--- macvlan1
In this case, all the locks end up with a nesting subclass of 1, so
lockdep thinks that there is still a deadlock:
- in the first case we have (macvlan_netdev_addr_lock_key, 1) and then
take (vlan_netdev_xmit_lock_key, 1)
- in the second case, we have (vlan_netdev_xmit_lock_key, 1) and then
take (macvlan_netdev_addr_lock_key, 1)
By removing the linktype check in dev_get_nest_level() and always
incrementing the nesting depth, lockdep considers this configuration
valid.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, trying to setup a vlan over a macsec device, or other
combinations of devices, triggers a lockdep warning.
Use netdev_lockdep_set_classes and ndo_get_lock_subclass, similar to
what macvlan does.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
If IPv6 is disabled when the option is set to keep IPv6
addresses on link down, userspace is unaware of this as
there is no such indication via netlink. The solution is to
remove the IPv6 addresses in this case, which results in
netlink messages indicating removal of addresses in the
usual manner. This fix also makes the behavior consistent
with the case of having IPv6 disabled first, which stops
IPv6 addresses from being added.
Fixes: f1705ec197 ("net: ipv6: Make address flushing on ifdown optional")
Signed-off-by: Mike Manning <mmanning@brocade.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sctp_transport_seq_start() does not currently clear iter->start_fail on
success, but relies on it being zero when it is allocated (by
seq_open_net()).
This can be a problem in the following sequence:
open() // allocates iter (and implicitly sets iter->start_fail = 0)
read()
- iter->start() // fails and sets iter->start_fail = 1
- iter->stop() // doesn't call sctp_transport_walk_stop() (correct)
read() again
- iter->start() // succeeds, but doesn't change iter->start_fail
- iter->stop() // doesn't call sctp_transport_walk_stop() (wrong)
We should initialize sctp_ht_iter::start_fail to zero if ->start()
succeeds, otherwise it's possible that we leave an old value of 1 there,
which will cause ->stop() to not call sctp_transport_walk_stop(), which
causes all sorts of problems like not calling rcu_read_unlock() (and
preempt_enable()), eventually leading to more warnings like this:
BUG: sleeping function called from invalid context at mm/slab.h:388
in_atomic(): 0, irqs_disabled(): 0, pid: 16551, name: trinity-c2
Preemption disabled at:[<ffffffff819bceb6>] rhashtable_walk_start+0x46/0x150
[<ffffffff81149abb>] preempt_count_add+0x1fb/0x280
[<ffffffff83295892>] _raw_spin_lock+0x12/0x40
[<ffffffff819bceb6>] rhashtable_walk_start+0x46/0x150
[<ffffffff82ec665f>] sctp_transport_walk_start+0x2f/0x60
[<ffffffff82edda1d>] sctp_transport_seq_start+0x4d/0x150
[<ffffffff81439e50>] traverse+0x170/0x850
[<ffffffff8143aeec>] seq_read+0x7cc/0x1180
[<ffffffff814f996c>] proc_reg_read+0xbc/0x180
[<ffffffff813d0384>] do_loop_readv_writev+0x134/0x210
[<ffffffff813d2a95>] do_readv_writev+0x565/0x660
[<ffffffff813d6857>] vfs_readv+0x67/0xa0
[<ffffffff813d6c16>] do_preadv+0x126/0x170
[<ffffffff813d710c>] SyS_preadv+0xc/0x10
[<ffffffff8100334c>] do_syscall_64+0x19c/0x410
[<ffffffff83296225>] return_from_SYSCALL_64+0x0/0x6a
[<ffffffffffffffff>] 0xffffffffffffffff
Notice that this is a subtly different stacktrace from the one in commit
5fc382d875 ("net/sctp: terminate rhashtable walk correctly").
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-By: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If iriap_register_lsap() fails to allocate memory, self->lsap is
set to NULL. However, none of the callers handle the failure and
irlmp_connect_request() will happily dereference it:
iriap_register_lsap: Unable to allocated LSAP!
================================================================================
UBSAN: Undefined behaviour in net/irda/irlmp.c:378:2
member access within null pointer of type 'struct lsap_cb'
CPU: 1 PID: 15403 Comm: trinity-c0 Not tainted 4.8.0-rc1+ #81
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org
04/01/2014
0000000000000000 ffff88010c7e78a8 ffffffff82344f40 0000000041b58ab3
ffffffff84f98000 ffffffff82344e94 ffff88010c7e78d0 ffff88010c7e7880
ffff88010630ad00 ffffffff84a5fae0 ffffffff84d3f5c0 000000000000017a
Call Trace:
[<ffffffff82344f40>] dump_stack+0xac/0xfc
[<ffffffff8242f5a8>] ubsan_epilogue+0xd/0x8a
[<ffffffff824302bf>] __ubsan_handle_type_mismatch+0x157/0x411
[<ffffffff83b7bdbc>] irlmp_connect_request+0x7ac/0x970
[<ffffffff83b77cc0>] iriap_connect_request+0xa0/0x160
[<ffffffff83b77f48>] state_s_disconnect+0x88/0xd0
[<ffffffff83b78904>] iriap_do_client_event+0x94/0x120
[<ffffffff83b77710>] iriap_getvaluebyclass_request+0x3e0/0x6d0
[<ffffffff83ba6ebb>] irda_find_lsap_sel+0x1eb/0x630
[<ffffffff83ba90c8>] irda_connect+0x828/0x12d0
[<ffffffff833c0dfb>] SYSC_connect+0x22b/0x340
[<ffffffff833c7e09>] SyS_connect+0x9/0x10
[<ffffffff81007bd3>] do_syscall_64+0x1b3/0x4b0
[<ffffffff845f946a>] entry_SYSCALL64_slow_path+0x25/0x25
================================================================================
The bug seems to have been around since forever.
There's more problems with missing error checks in iriap_init() (and
indeed all of irda_init()), but that's a bigger problem that needs
very careful review and testing. This patch will fix the most serious
bug (as it's easily reached from unprivileged userspace).
I have tested my patch with a reproducer.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pass the correct type __wsum to csum_sub() and csum_add(). This doesn't
really change anything since __wsum really *is* __be32, but removes the
address space warnings from sparse.
Cc: Eric Dumazet <edumazet@google.com>
Fixes: 34ae6a1aa0 ("ipv6: update skb->csum when CE mark is propagated")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix the bpf_try_make_writable() helper and all call sites we have in BPF,
it's currently defect with regards to skbs when the write_len spans into
non-linear parts, no matter if cloned or not.
There are multiple issues at once. First, using skb_store_bits() is not
correct since even if we have a cloned skb, page frags can still be shared.
To really make them private, we need to pull them in via __pskb_pull_tail()
first, which also gets us a private head via pskb_expand_head() implicitly.
This is for helpers like bpf_skb_store_bytes(), bpf_l3_csum_replace(),
bpf_l4_csum_replace(). Really, the only thing reasonable and working here
is to call skb_ensure_writable() before any write operation. Meaning, via
pskb_may_pull() it makes sure that parts we want to access are pulled in and
if not does so plus unclones the skb implicitly. If our write_len still fits
the headlen and we're cloned and our header of the clone is not writable,
then we need to make a private copy via pskb_expand_head(). skb_store_bits()
is a bit misleading and only safe to store into non-linear data in different
contexts such as 357b40a18b ("[IPV6]: IPV6_CHECKSUM socket option can
corrupt kernel memory").
For above BPF helper functions, it means after fixed bpf_try_make_writable(),
we've pulled in enough, so that we operate always based on skb->data. Thus,
the call to skb_header_pointer() and skb_store_bits() becomes superfluous.
In bpf_skb_store_bytes(), the len check is unnecessary too since it can
only pass in maximum of BPF stack size, so adding offset is guaranteed to
never overflow. Also bpf_l3/4_csum_replace() helpers must test for proper
offset alignment since they use __sum16 pointer for writing resulting csum.
The remaining helpers that change skb data not discussed here yet are
bpf_skb_vlan_push(), bpf_skb_vlan_pop() and bpf_skb_change_proto(). The
vlan helpers internally call either skb_ensure_writable() (pop case) and
skb_cow_head() (push case, for head expansion), respectively. Similarly,
bpf_skb_proto_xlat() takes care to not mangle page frags.
Fixes: 608cd71a9c ("tc: bpf: generalize pedit action")
Fixes: 91bc4822c3 ("tc: bpf: add checksum helpers")
Fixes: 3697649ff2 ("bpf: try harder on clones when writing into skb")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the missing of_node_put() after finishing the usage
of of_parse_phandle() or of_node_get() used by fixed_phy.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To fix runtime warning with lockdep is enabled due that u64_stats_sync
is not initialized well, so add it.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, if calipso_genopt fails then the error exit path
does not free the ipv6_opt_hdr new causing a memory leak. Fix
this by kfree'ing new on the error exit path.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull KVM fixes from Radim Krčmář:
"KVM:
- lock kvm_device list to prevent corruption on device creation.
PPC:
- split debugfs initialization from creation of the xics device to
unlock the newly taken kvm lock earlier.
s390:
- prevent userspace from triggering two WARN_ON_ONCE.
MIPS:
- fix several issues in the management of TLB faults (Cc: stable)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
MIPS: KVM: Propagate kseg0/mapped tlb fault errors
MIPS: KVM: Fix gfn range check in kseg0 tlb faults
MIPS: KVM: Add missing gfn range check
MIPS: KVM: Fix mapped fault broken commpage handling
KVM: Protect device ops->create and list_add with kvm->lock
KVM: PPC: Move xics_debugfs_init out of create
KVM: s390: reset KVM_REQ_MMU_RELOAD if mapping the prefix failed
KVM: s390: set the prefix initially properly
Pull block fixes from Jens Axboe:
- an NVMe fix from Gabriel, fixing a suspend/resume issue on some
setups
- addition of a few missing entries in the block queue sysfs
documentation, from Joe
- a fix for a sparse shadow warning for the bvec iterator, from
Johannes
- a writeback deadlock involving raid issuing barriers, and not
flushing the plug when we wakeup the flusher threads. From
Konstantin
- a set of patches for the NVMe target/loop/rdma code, from Roland and
Sagi
* 'for-linus' of git://git.kernel.dk/linux-block:
bvec: avoid variable shadowing warning
doc: update block/queue-sysfs.txt entries
nvme: Suspend all queues before deletion
mm, writeback: flush plugged IO in wakeup_flusher_threads()
nvme-rdma: Remove unused includes
nvme-rdma: start async event handler after reconnecting to a controller
nvmet: Fix controller serial number inconsistency
nvmet-rdma: Don't use the inline buffer in order to avoid allocation for small reads
nvmet-rdma: Correctly handle RDMA device hot removal
nvme-rdma: Make sure to shutdown the controller if we can
nvme-loop: Remove duplicate call to nvme_remove_namespaces
nvme-rdma: Free the I/O tags when we delete the controller
nvme-rdma: Remove duplicate call to nvme_remove_namespaces
nvme-rdma: Fix device removal handling
nvme-rdma: Queue ns scanning after a sucessful reconnection
nvme-rdma: Don't leak uninitialized memory in connect request private data
h8300 builds fail with
arch/h8300/include/asm/io.h:9:15: error: unknown type name ‘u8’
arch/h8300/include/asm/io.h:15:15: error: unknown type name ‘u16’
arch/h8300/include/asm/io.h:21:15: error: unknown type name ‘u32’
and many related errors.
Fixes: 23c82d41bdf4 ("kexec-allow-architectures-to-override-boot-mapping-fix")
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
unicore32 fails to compile with the following errors.
mm/memory.c: In function ‘__handle_mm_fault’:
mm/memory.c:3381: error:
too many arguments to function ‘arch_vma_access_permitted’
mm/gup.c: In function ‘check_vma_flags’:
mm/gup.c:456: error:
too many arguments to function ‘arch_vma_access_permitted’
mm/gup.c: In function ‘vma_permits_fault’:
mm/gup.c:640: error:
too many arguments to function ‘arch_vma_access_permitted’
Fixes: d61172b4b6 ("mm/core, x86/mm/pkeys: Differentiate instruction fetches")
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
While hashing out BPF's current_task_under_cgroup helper bits, it came
to discussion that the skb_in_cgroup helper name was suboptimally chosen.
Tejun says:
So, I think in_cgroup should mean that the object is in that
particular cgroup while under_cgroup in the subhierarchy of that
cgroup. Let's rename the other subhierarchy test to under too. I
think that'd be a lot less confusing going forward.
[...]
It's more intuitive and gives us the room to implement the real
"in" test if ever necessary in the future.
Since this touches uapi bits, we need to change this as long as v4.8
is not yet officially released. Thus, change the helper enum and rename
related bits.
Fixes: 4a482f34af ("cgroup: bpf: Add bpf_skb_in_cgroup_proto")
Reference: http://patchwork.ozlabs.org/patch/658500/
Suggested-by: Sargun Dhillon <sargun@sargun.me>
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Update some documentation related to system sleep to document new
features and remove outdated information from it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
When CONFIG_NET_DSA_HWMON is disabled, we get warnings about two unused
functions whose only callers are all inside of an #ifdef:
drivers/net/dsa/mv88e6xxx.c:3257:12: 'mv88e6xxx_mdio_page_write' defined but not used [-Werror=unused-function]
drivers/net/dsa/mv88e6xxx.c:3244:12: 'mv88e6xxx_mdio_page_read' defined but not used [-Werror=unused-function]
This adds another ifdef around the function definitions. The warnings
appeared after the functions were marked 'static', but the problem
was already there before that.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 57d3231057 ("net: dsa: mv88e6xxx: fix style issues")
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull VFIO fix from Alex Williamson:
"Fix oops when dereferencing empty data (Alex Williamson)"
* tag 'vfio-v4.8-rc2' of git://github.com/awilliam/linux-vfio:
vfio/pci: Fix NULL pointer oops in error interrupt setup handling
Pull nfsd fixes from Bruce Fields:
"Fixes for the dentry refcounting leak I introduced in 4.8-rc1, and for
races in the LOCK code which appear to go back to the big nfsd state
lock removal from 3.17"
* tag 'nfsd-4.8-1' of git://linux-nfs.org/~bfields/linux:
nfsd: don't return an unhashed lock stateid after taking mutex
nfsd: Fix race between FREE_STATEID and LOCK
nfsd: fix dentry refcounting on create
Pull power management fixes from Rafael Wysocki:
"Two hibernation fixes allowing it to work with the recently added
randomization of the kernel identity mapping base on x86-64 and one
cpufreq driver regression fix.
Specifics:
- Fix the x86 identity mapping creation helpers to avoid the
assumption that the base address of the mapping will always be
aligned at the PGD level, as it may be aligned at the PUD level if
address space randomization is enabled (Rafael Wysocki).
- Fix the hibernation core to avoid executing tracing functions
before restoring the processor state completely during resume
(Thomas Garnier).
- Fix a recently introduced regression in the powernv cpufreq driver
that causes it to crash due to an out-of-bounds array access
(Akshay Adiga)"
* tag 'pm-4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / hibernate: Restore processor state before using per-CPU variables
x86/power/64: Always create temporary identity mapping correctly
cpufreq: powernv: Fix crash in gpstate_timer_handler()
Currently we free the resources backing the enclosure device before we
call device_unregister(). This is racy: during rmmod of low-level SCSI
drivers that hook into enclosure, we end up with a small window of time
during which writing to /sys can OOPS. Example trace with mpt3sas:
general protection fault: 0000 [#1] SMP KASAN
Modules linked in: mpt3sas(-) <...>
RIP: [<ffffffffa0388a98>] ses_get_page2_descriptor.isra.6+0x38/0x220 [ses]
Call Trace:
[<ffffffffa0389d14>] ses_set_fault+0xf4/0x400 [ses]
[<ffffffffa0361069>] set_component_fault+0xa9/0xf0 [enclosure]
[<ffffffff8205bffc>] dev_attr_store+0x3c/0x70
[<ffffffff81677df5>] sysfs_kf_write+0x115/0x180
[<ffffffff81675725>] kernfs_fop_write+0x275/0x3a0
[<ffffffff8151f810>] __vfs_write+0xe0/0x3e0
[<ffffffff8152281f>] vfs_write+0x13f/0x4a0
[<ffffffff81526731>] SyS_write+0x111/0x230
[<ffffffff828b401b>] entry_SYSCALL_64_fastpath+0x13/0x94
Fortunately the solution is extremely simple: call device_unregister()
before we free the resources, and the race no longer exists. The driver
core holds a reference over ->remove_dev(), so AFAICT this is safe.
Signed-off-by: Calvin Owens <calvinowens@fb.com>
Reviewed-by: James Bottomley <jejb@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull x86 fixes from Ingo Molnar:
"This is bigger than usual - the reason is partly a pent-up stream of
fixes after the merge window and partly accidental. The fixes are:
- five patches to fix a boot failure on Andy Lutomirsky's laptop
- four SGI UV platform fixes
- KASAN fix
- warning fix
- documentation update
- swap entry definition fix
- pkeys fix
- irq stats fix"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic/x2apic, smp/hotplug: Don't use before alloc in x2apic_cluster_probe()
x86/efi: Allocate a trampoline if needed in efi_free_boot_services()
x86/boot: Rework reserve_real_mode() to allow multiple tries
x86/boot: Defer setup_real_mode() to early_initcall time
x86/boot: Synchronize trampoline_cr4_features and mmu_cr4_features directly
x86/boot: Run reserve_bios_regions() after we initialize the memory map
x86/irq: Do not substract irq_tlb_count from irq_call_count
x86/mm: Fix swap entry comment and macro
x86/mm/kaslr: Fix -Wformat-security warning
x86/mm/pkeys: Fix compact mode by removing protection keys' XSAVE buffer manipulation
x86/build: Reduce the W=1 warnings noise when compiling x86 syscall tables
x86/platform/UV: Fix kernel panic running RHEL kdump kernel on UV systems
x86/platform/UV: Fix problem with UV4 BIOS providing incorrect PXM values
x86/platform/UV: Fix bug with iounmap() of the UV4 EFI System Table causing a crash
x86/platform/UV: Fix problem with UV4 Socket IDs not being contiguous
x86/entry: Clarify the RF saving/restoring situation with SYSCALL/SYSRET
x86/mm: Disable preemption during CR3 read+write
x86/mm/KASLR: Increase BRK pages for KASLR memory randomization
x86/mm/KASLR: Fix physical memory calculation on KASLR memory randomization
x86, kasan, ftrace: Put APIC interrupt handlers into .irqentry.text
Pull timer fixes from Ingo Molnar:
"Misc fixes: a /dev/rtc regression fix, two APIC timer period
calibration fixes, an ARM clocksource driver fix and a NOHZ
power use regression fix"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/hpet: Fix /dev/rtc breakage caused by RTC cleanup
x86/timers/apic: Inform TSC deadline clockevent device about recalibration
x86/timers/apic: Fix imprecise timer interrupts by eliminating TSC clockevents frequency roundoff error
timers: Fix get_next_timer_interrupt() computation
clocksource/arm_arch_timer: Force per-CPU interrupt to be level-triggered
Pull scheduler fixes from Ingo Molnar:
"Misc fixes: cputime fixes, two deadline scheduler fixes and a cgroups
scheduling fix"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/cputime: Fix omitted ticks passed in parameter
sched/cputime: Fix steal time accounting
sched/deadline: Fix lock pinning warning during CPU hotplug
sched/cputime: Mitigate performance regression in times()/clock_gettime()
sched/fair: Fix typo in sync_throttle()
sched/deadline: Fix wrap-around in DL heap
Restore the processor state before calling any other functions to
ensure per-CPU variables can be used with KASLR memory randomization.
Tracing functions use per-CPU variables (GS based on x86) and one was
called just before restoring the processor state fully. It resulted
in a double fault when both the tracing & the exception handler
functions tried to use a per-CPU variable.
Fixes: bb3632c610 (PM / sleep: trace events for suspend/resume)
Reported-and-tested-by: Borislav Petkov <bp@suse.de>
Reported-by: Jiri Kosina <jikos@kernel.org>
Tested-by: Rafael J. Wysocki <rafael@kernel.org>
Tested-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Thomas Garnier <thgarnie@google.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
commit 4fcd504edb ("power: reset: add reboot mode driver") uses api from
syscon, and syscon uses ioremap/iounmap which depends on HAS_IOMEM, so
let's depend on MFD_SYSCON instead of selecting it directly to avoid the
um-allyesconfig like build error on archs that without iomem:
drivers/mfd/syscon.c: In function 'of_syscon_register':
drivers/mfd/syscon.c:67:9: error: implicit declaration of function 'ioremap' [-Werror=implicit-function-declaration]
base = ioremap(res.start, resource_size(&res));
^
drivers/mfd/syscon.c:67:7: warning: assignment makes pointer from integer without a cast [-Wint-conversion]
base = ioremap(res.start, resource_size(&res));
^
drivers/mfd/syscon.c:109:2: error: implicit declaration of function 'iounmap' [-Werror=implicit-function-declaration]
iounmap(base);
^
Reported-by: Kbuild test robot <fengguang.wu@intel.com>
Fixes: 4fcd504edbf7("power: reset: add reboot mode driver")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
The device's model download function returns the model data as
an array of u32s, which is later compared to the reference
model data. However, since the latter is an array of u16s,
the comparison does not happen correctly, and model verification
fails. This in turn breaks the POR initialization sequence.
Fixes: 39e7213edc ("max17042_battery: Support regmap to access device's registers")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sven Van Asbroeck <TheSven73@googlemail.com>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, plus two uncore-PMU fixes, an uprobes fix, a
perf-cgroups fix and an AUX events fix"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Add enable_box for client MSR uncore
perf/x86/intel/uncore: Fix uncore num_counters
uprobes/x86: Fix RIP-relative handling of EVEX-encoded instructions
perf/core: Set cgroup in CPU contexts for new cgroup events
perf/core: Fix sideband list-iteration vs. event ordering NULL pointer deference crash
perf probe ppc64le: Fix probe location when using DWARF
perf probe: Add function to post process kernel trace events
tools: Sync cpufeatures headers with the kernel
toops: Sync tools/include/uapi/linux/bpf.h with the kernel
tools: Sync cpufeatures.h and vmx.h with the kernel
perf probe: Support signedness casting
perf stat: Avoid skew when reading events
perf probe: Fix module name matching
perf probe: Adjust map->reloc offset when finding kernel symbol from map
perf hists: Trim libtraceevent trace_seq buffers
perf script: Add 'bpf-output' field to usage message
This should eliminate a whole class of markup warnings, at the cost of
occasionally amusing markup choices; we'll have to see if it works out.
Suggested-by: Markus Heiser <markus.heiser@darmarIT.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
nfsd4_lock will take the st_mutex before working with the stateid it
gets, but between the time when we drop the cl_lock and take the mutex,
the stateid could become unhashed (a'la FREE_STATEID). If that happens
the lock stateid returned to the client will be forgotten.
Fix this by first moving the st_mutex acquisition into
lookup_or_create_lock_state. Then, have it check to see if the lock
stateid is still hashed after taking the mutex. If it's not, then put
the stateid and try the find/create again.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Tested-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Cc: stable@vger.kernel.org # feb9dad5 nfsd: Always lock state exclusively.
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Pull locking fixes from Ingo Molnar:
"Misc fixes: lockstat fix, futex fix on !MMU systems, big endian fix
for qrwlocks and a race fix for pvqspinlocks"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/pvqspinlock: Fix a bug in qstat_read()
locking/pvqspinlock: Fix double hash race
locking/qrwlock: Fix write unlock bug on big endian systems
futex: Assume all mappings are private on !MMU systems
Pull irq fix from Ingo Molnar:
"A fix for an MSI regression"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/msi: Make sure PCI MSIs are activated early
Pull EFI fixes from Ingo Molnar:
"A fix for EFI capsules and an SGI UV platform fix"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/capsule: Allocate whole capsule into virtual memory
x86/platform/uv: Skip UV runtime services mapping in the efi_runtime_disabled case
Pull NFS client bugfixes from Trond Myklebust:
"Highlights include:
- Stable patch from Olga to fix RPCSEC_GSS upcalls when the same user
needs multiple different security services (e.g. krb5i and krb5p).
- Stable patch to fix a regression introduced by the use of
SO_REUSEPORT, and that prevented the use of multiple different NFS
versions to the same server.
- TCP socket reconnection timer fixes.
- Patch from Neil to disable the use of IPv6 temporary addresses"
* tag 'nfs-for-4.8-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFSv4: Cap the transport reconnection timer at 1/2 lease period
NFSv4: Cleanup the setting of the nfs4 lease period
SUNRPC: Limit the reconnect backoff timer to the max RPC message timeout
SUNRPC: Fix reconnection timeouts
NFSv4.2: LAYOUTSTATS may return NFS4ERR_ADMIN/DELEG_REVOKED
SUNRPC: disable the use of IPv6 temporary addresses.
SUNRPC: allow for upcalls for same uid but different gss service
SUNRPC: Fix up socket autodisconnect
SUNRPC: Handle EADDRNOTAVAIL on connection failures
Pull libnvdimm fixes from Dan Williams:
- Fix for the nd_blk (NVDIMM Block Window Aperture) driver.
A spec clarification requires the driver to mask off reserved bits in
status register. This is tagged for -stable back to the v4.2 kernel.
- Fix for a kernel crash in the nvdimm unit tests when module loading
is interrupted with SIGTERM. Tagged for -stable since validation
efforts external to Intel use the unit tests for qualifying
backports.
- Add a new 'size' sysfs attribute for the BTT (NVDIMM Block
Translation Table) driver to make it symmetric with the other
namespace personality drivers (PFN and DAX) that provide a size
attribute for indicating how much namespace capacity is lost to
metadata.
The BTT change arrived at the start of the merge window and has
appeared in a -next release. It can technically wait for 4.9, but it
is small, fixes asymmetry in the libnvdimm-sysfs interface, and
something I would have squeezed into the v4.8 pull request had it
arrived a few days earlier.
* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
tools/testing/nvdimm: fix SIGTERM vs hotplug crash
nvdimm, btt: add a size attribute for BTTs
libnvdimm, nd_blk: mask off reserved status bits
With the commit 44a7185c2a ("of/platform: Add common method to
populate default bus"), a default function is introduced to populate
the default bus and this function is invoked at the arch_initcall_sync
level. But a lot of ppc boards use machine_device_initcall() to
populate the default bus. This means that the default populate function
has higher priority and would override the arch specific population of
the bus. The side effect is that some arch specific bus are not probed,
then cause various malfunction due to the miss of some devices. Since
it is very possible to introduce bugs if we simply change the initcall
level for all these boards(about 30+). This just disable this default
function for all the ppc boards.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Pull sound fixes from Takashi Iwai:
"A regression fix of HD-audio runtime PM and two USB quirks"
* tag 'sound-4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Manage power well properly for resume
ALSA: usb-audio: Add quirk for ELP HD USB Camera
ALSA: usb-audio: Add a sample rate quirk for Creative Live! Cam Socialize HD (VF0610)
Pull powerpc fixes from Michael Ellerman:
"Some powerpc fixes for 4.8:
Misc:
- powerpc/vdso: Fix build rules to rebuild vdsos correctly from Nicholas Piggin
- powerpc/ptrace: Fix coredump since ptrace TM changes from Cyril Bur
- powerpc/32: Fix csum_partial_copy_generic() from Christophe Leroy
- cxl: Set psl_fir_cntl to production environment value from Frederic Barrat
- powerpc/eeh: Switch to conventional PCI address output in EEH log from Guilherme G. Piccoli
- cxl: Use fixed width predefined types in data structure. from Philippe Bergheaud
- powerpc/vdso: Add missing include file from Guenter Roeck
- powerpc: Fix unused function warning 'lmb_to_memblock' from Alastair D'Silva
- powerpc/powernv/ioda: Fix TCE invalidate to work in real mode again from Alexey Kardashevskiy
- powerpc/cell: Add missing error code in spufs_mkgang() from Dan Carpenter
- crypto: crc32c-vpmsum - Convert to CPU feature based module autoloading from Anton Blanchard
- powerpc/pasemi: Fix coherent_dma_mask for dma engine from Darren Stevens
Benjamin Herrenschmidt:
- powerpc/32: Fix crash during static key init
- powerpc: Update obsolete comment in setup_32.c about early_init()
- powerpc: Print the kernel load address at the end of prom_init()
- powerpc/pnv/pci: Fix incorrect PE reservation attempt on some 64-bit BARs
- powerpc/xics: Properly set Edge/Level type and enable resend
Mahesh Salgaonkar:
- powerpc/book3s: Fix MCE console messages for unrecoverable MCE.
- powerpc/powernv: Fix MCE handler to avoid trashing CR0/CR1 registers.
- powerpc/powernv: Move IDLE_STATE_ENTER_SEQ macro to cpuidle.h
- powerpc/powernv: Load correct TOC pointer while waking up from winkle.
Andrew Donnellan:
- cxl: Fix sparse warnings
- cxl: Fix NULL dereference in cxl_context_init() on PowerVM guests
Michael Ellerman:
- selftests/powerpc: Specify we expect to build with std=gnu99
- powerpc/Makefile: Use cflags-y/aflags-y for setting endian options
- powerpc/pci: Fix endian bug in fixed PHB numbering"
* tag 'powerpc-4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (26 commits)
selftests/powerpc: Specify we expect to build with std=gnu99
powerpc/vdso: Fix build rules to rebuild vdsos correctly
powerpc/Makefile: Use cflags-y/aflags-y for setting endian options
powerpc/32: Fix crash during static key init
powerpc: Update obsolete comment in setup_32.c about early_init()
powerpc: Print the kernel load address at the end of prom_init()
powerpc/ptrace: Fix coredump since ptrace TM changes
powerpc/32: Fix csum_partial_copy_generic()
cxl: Set psl_fir_cntl to production environment value
powerpc/pnv/pci: Fix incorrect PE reservation attempt on some 64-bit BARs
powerpc/book3s: Fix MCE console messages for unrecoverable MCE.
powerpc/pci: Fix endian bug in fixed PHB numbering
powerpc/eeh: Switch to conventional PCI address output in EEH log
cxl: Fix sparse warnings
cxl: Fix NULL dereference in cxl_context_init() on PowerVM guests
cxl: Use fixed width predefined types in data structure.
powerpc/vdso: Add missing include file
powerpc: Fix unused function warning 'lmb_to_memblock'
powerpc/powernv: Fix MCE handler to avoid trashing CR0/CR1 registers.
powerpc/powernv: Move IDLE_STATE_ENTER_SEQ macro to cpuidle.h
...
When CONFIG_LOCALVERSION_AUTO is disabled, the version string is
just a tag name (or with a '+' appended if HEAD is not a tagged
commit).
During the development (and especially when git-bisecting), longer
version string would be helpful to identify the commit we are running.
This is a default y option, so drop the unset to enable it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Enable options commonly needed by popular virtualization
and container applications. Use modules when possible to
avoid too much overhead for users not interested.
- add namespace and cgroup options needed
- add seccomp - optional, but enhances Qemu etc
- bridge, nat, veth, macvtap and multicast for routing
guests and containers
- btfrs and overlayfs modules for container COW backends
- while near it, make fuse a module instead of built-in.
Generated with make saveconfig and dropping unrelated spurious
change hunks while commiting. bloat-o-meter old-vmlinux vmlinux:
add/remove: 905/390 grow/shrink: 767/229 up/down: 183513/-94861 (88652)
....
Total: Before=10515408, After=10604060, chg +0.84%
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In create_safe_exec_page(), we create a copy of the hibernate exit text,
along with some page tables to map this via TTBR0. We then install the
new tables in TTBR0.
In swsusp_arch_resume() we call create_safe_exec_page() before trying a
number of operations which may fail (e.g. copying the linear map page
tables). If these fail, we bail out of swsusp_arch_resume() and return
an error code, but leave TTBR0 as-is. Subsequently, the core hibernate
code will call free_basic_memory_bitmaps(), which will free all of the
memory allocations we made, including the page tables installed in
TTBR0.
Thus, we may have TTBR0 pointing at dangling freed memory for some
period of time. If the hibernate attempt was triggered by a user
requesting a hibernate test via the reboot syscall, we may return to
userspace with the clobbered TTBR0 value.
Avoid these issues by reorganising swsusp_arch_resume() such that we
have no failure paths after create_safe_exec_page(). We also add a check
that the zero page allocation succeeded, matching what we have for other
allocations.
Fixes: 82869ac57b ("arm64: kernel: Add support for hibernate/suspend-to-disk")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: James Morse <james.morse@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org> # 4.7+
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In create_safe_exec_page we install a set of global mappings in TTBR0,
then subsequently invalidate TLBs. While TTBR0 points at the zero page,
and the TLBs should be free of stale global entries, we may have stale
ASID-tagged entries (e.g. from the EFI runtime services mappings) for
the same VAs. Per the ARM ARM these ASID-tagged entries may conflict
with newly-allocated global entries, and we must follow a
Break-Before-Make approach to avoid issues resulting from this.
This patch reworks create_safe_exec_page to invalidate TLBs while the
zero page is still in place, ensuring that there are no potential
conflicts when the new TTBR0 value is installed. As a single CPU is
online while this code executes, we do not need to perform broadcast TLB
maintenance, and can call local_flush_tlb_all(), which also subsumes
some barriers. The remaining assembly is converted to use write_sysreg()
and isb().
Other than this, we safely manipulate TTBRs in the hibernate dance. The
code we install as part of the new TTBR0 mapping (the hibernated
kernel's swsusp_arch_suspend_exit) installs a zero page into TTBR1,
invalidates TLBs, then installs its preferred value. Upon being restored
to the middle of swsusp_arch_suspend, the new image will call
__cpu_suspend_exit, which will call cpu_uninstall_idmap, installing the
zero page in TTBR0 and invalidating all TLB entries.
Fixes: 82869ac57b ("arm64: kernel: Add support for hibernate/suspend-to-disk")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: James Morse <james.morse@arm.com>
Tested-by: James Morse <james.morse@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: <stable@vger.kernel.org> # 4.7+
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Michael reported 'perf mem -t store record' being broken. The reason is
latest rework of this area:
commit acbe613e0c ("perf tools: Add monitored events array")
We don't mark perf_mem_events store record when -t store option is
specified.
Committer notes:
Before:
# perf mem -t store record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.020 MB perf.data (7 samples) ]
# perf evlist
cycles:ppp
#
After:
# perf mem -t store record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.020 MB perf.data (7 samples) ]
# perf evlist
cpu/mem-stores/P
#
Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: acbe613e0c ("perf tools: Add monitored events array")
Link: http://lkml.kernel.org/r/1470905457-18311-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The June 2015 Intel SDM introduced IP Compression types 4 and 6. Refer
to section 36.4.2.2 Target IP (TIP) Packet - IP Compression.
Existing Intel PT packet decoder did not support type 4, and got type 6
wrong. Because type 3 and type 4 have the same number of bytes, the
packet 'count' has been changed from being the number of ip bytes to
being the type code. That allows the Intel PT decoder to correctly
decide whether to sign-extend or use the last ip. However that also
meant the code had to be adjusted in a number of places.
Currently hardware is not using the new compression types, so this fix
has no effect on existing hardware.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1469005206-3049-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Executing from a non-executable area gives an ugly message:
lkdtm: Performing direct entry EXEC_RODATA
lkdtm: attempting ok execution at ffff0000084c0e08
lkdtm: attempting bad execution at ffff000008880700
Bad mode in Synchronous Abort handler detected on CPU2, code 0x8400000e -- IABT (current EL)
CPU: 2 PID: 998 Comm: sh Not tainted 4.7.0-rc2+ #13
Hardware name: linux,dummy-virt (DT)
task: ffff800077e35780 ti: ffff800077970000 task.ti: ffff800077970000
PC is at lkdtm_rodata_do_nothing+0x0/0x8
LR is at execute_location+0x74/0x88
The 'IABT (current EL)' indicates the error but it's a bit cryptic
without knowledge of the ARM ARM. There is also no indication of the
specific address which triggered the fault. The increase in kernel
page permissions makes hitting this case more likely as well.
Handling the case in the vectors gives a much more familiar looking
error message:
lkdtm: Performing direct entry EXEC_RODATA
lkdtm: attempting ok execution at ffff0000084c0840
lkdtm: attempting bad execution at ffff000008880680
Unable to handle kernel paging request at virtual address ffff000008880680
pgd = ffff8000089b2000
[ffff000008880680] *pgd=00000000489b4003, *pud=0000000048904003, *pmd=0000000000000000
Internal error: Oops: 8400000e [#1] PREEMPT SMP
Modules linked in:
CPU: 1 PID: 997 Comm: sh Not tainted 4.7.0-rc1+ #24
Hardware name: linux,dummy-virt (DT)
task: ffff800077f9f080 ti: ffff800008a1c000 task.ti: ffff800008a1c000
PC is at lkdtm_rodata_do_nothing+0x0/0x8
LR is at execute_location+0x74/0x88
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Sorry to refer incorrect clock diagram, we double check it that the bits
configuration of the Xpll_aclk_perihp_src need to be fixed:
bit 1 - shows aclk_perihp_cpll_src_en
bit 0 - shows aclk_perihp_gpll_src_en
Through the testing that plug/unplug the USB ethernet cable on the RK3399 kevin board.
1. the hclk_host0 and hclk_host1 are endpoint clocks:
cpll --> G5[1] --> aclk_perihp_cpll_src --\ |--> hclk_host0
| --> ... ---> |
gpll --> G5[0] --> aclk_perihp_gpll_src --/ |--> hclk_host1
2. there is no clock below the cpll_aclk_perihp_src,
and the hclk_hostX are below the gpll_aclk_perihp_src:
pll_cpll 1 1 800000000 0 0
cpll 7 19 800000000 0 0
cpll_aclk_perihp_src 0 0 800000000 0 0
...
pll_gpll 1 1 594000000 0 0
gpll 10 10 594000000 0 0
gpll_aclk_perihp_src 2 2 594000000 0 0
hclk_perihp 5 5 74250000 0 0
hclk_host1_arb 2 2 74250000 0 0
hclk_host1 2 2 74250000 0 0
hclk_host0_arb 2 2 74250000 0 0
hclk_host0 2 2 74250000 0 0
3. by default, G5[0] and G5[1] are enabled:
localhost ~ # mem r 0xff760314
0x000003e0
4. close the G5[1] (aclk_perihp_cpll_src), and plug/unplug USB ethernet cable,
the DUT still works well:
localhost ~ # mem w 0xff760314 0xffff03e2
localhost ~ # mem r 0xff760314
0x000003e2
plug/unplug, the work statue is ok
5. close the G5[0] (aclk_perihp_gpll_src), , and plug/unplug USB ethernet cable,
the DUT will be crashed:
localhost ~ # mem w 0xff760314 0xffff03e1
localhost ~ # mem r 0xff760314
0x000003e1
plug/unplug, the DUT is crashed
Summary:
bit 1 - shows aclk_perihp_cpll_src_en
bit 0 - shows aclk_perihp_gpll_src_en
Fixes: 3bd14ae9da ("clk: rockchip: fix incorrect parent for rk3399's {c,g}pll_aclk_perihp_src")
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
[here the clock-documentation in the manual was actually stating the wrong
bits and thus only Xing's testing above revealed the issue]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Johan writes:
USB-serial fixes for v4.8-rc2
Here is a fix of a memory leak in a driver-registration error path, and
some new device ids.
Signed-off-by: Johan Hovold <johan@kernel.org>
Fix to return error code -ENODEV from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 87b2bdf022 ("ASoC: Intel: Skylake: Initialize NHLT table")
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Acked-By: Vinod Koul <vinod.kou@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
KVM: s390: Fixes for 4.8 (via kvm/master)
Here are two fixes found by fuzzing of the ioctl interface.
Both cases can trigger a WARN_ON_ONCE from user space.
kvm_mips_handle_mapped_seg_tlb_fault() appears to map the guest page at
virtual address 0 to PFN 0 if the guest has created its own mapping
there. The intention is unclear, but it may have been an attempt to
protect the zero page from being mapped to anything but the comm page in
code paths you wouldn't expect from genuine commpage accesses (guest
kernel mode cache instructions on that address, hitting trapping
instructions when executing from that address with a coincidental TLB
eviction during the KVM handling, and guest user mode accesses to that
address).
Fix this to check for mappings exactly at KVM_GUEST_COMMPAGE_ADDR (it
may not be at address 0 since commit 42aa12e74e ("MIPS: KVM: Move
commpage so 0x0 is unmapped")), and set the corresponding EntryLo to be
interpreted as 0 (invalid).
Fixes: 858dd5d457 ("KVM/MIPS32: MMU/TLB operations for the Guest.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Cc: <stable@vger.kernel.org> # 3.10.x-
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
KVM devices were manipulating list data structures without any form of
synchronization, and some implementations of the create operations also
suffered from a lack of synchronization.
Now when we've split the xics create operation into create and init, we
can hold the kvm->lock mutex while calling the create operation and when
manipulating the devices list.
The error path in the generic code gets slightly ugly because we have to
take the mutex again and delete the device from the list, but holding
the mutex during anon_inode_getfd or releasing/locking the mutex in the
common non-error path seemed wrong.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
As we are about to hold the kvm->lock during the create operation on KVM
devices, we should move the call to xics_debugfs_init into its own
function, since holding a mutex over extended amounts of time might not
be a good idea.
Introduce an init operation on the kvm_device_ops struct which cannot
fail and call this, if configured, after the device has been created.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
This is likely that checking 'phy->hsic_clk' instead of 'phy->clk' is
expected here.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Chen-Yu Tsai <wens@csie.org
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Return proper error instead of 0 if brcm_sata_phy_init fails.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Create a new header file for TI DA8XX SoC CFGCHIPx registers.
This will be used by a number of planned drivers including a new USB
PHY driver and common clock framework drivers.
The same defines *will* be removed from the platform_data header,
once all the users start using the new syscon device header.
This also fixes the following compiler error caused due to
a dependent patch not merged.
drivers/phy/phy-da8xx-usb.c:19:37:
fatal error: linux/mfd/da8xx-cfgchip.h: No such file or directory
#include <linux/mfd/da8xx-cfgchip.h>
Signed-off-by: David Lechner <david@lechnology.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Use the new of_usb_get_dr_mode_by_phy() function to get the dr_mode
from the musb controller node instead of assuming that having an id_det
gpio means otg mode, and not having one means host mode.
Implement peripheral-only mode by adding a sun4i_usb_phy0_get_id_det
helper which looks at the dr_mode, always registering our extcon and
always monitoring vbus.
If dr_mode is not specified in the dts, do not register phy0 as we then
do not know how to treat it. This is actually a good thing as this means
we will not be registering phy0 on devices where the otg controller is
not enabled in the devicetree.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Dues to incorrect diagram, we need to fix incorrect bits for
(c/g)pll_aclk_emmc_src:
cpll_aclk_emmc_src --> G6[13]
gpll_aclk_emmc_src --> G6[12]
Fixes: 115510053e ("clk: rockchip: add clock controller for the RK3399")
Signed-off-by: Xing Zheng <zhengxing@rock-chips.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
When triggering KVM_RUN without a user memory region being mapped
(KVM_SET_USER_MEMORY_REGION) a validity intercept occurs. This could
happen, if the user memory region was not mapped initially or if it
was unmapped after the vcpu is initialized. The function
kvm_s390_handle_requests checks for the KVM_REQ_MMU_RELOAD bit. The
check function always clears this bit. If gmap_mprotect_notify
returns an error code, the mapping failed, but the KVM_REQ_MMU_RELOAD
was not set anymore. So the next time kvm_s390_handle_requests is
called, the execution would fall trough the check for
KVM_REQ_MMU_RELOAD. The bit needs to be resetted, if
gmap_mprotect_notify returns an error code. Resetting the bit with
kvm_make_request(KVM_REQ_MMU_RELOAD, vcpu) fixes the bug.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Julius Niedworok <jniedwor@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
When KVM_RUN is triggered on a VCPU without an initial reset, a
validity intercept occurs.
Setting the prefix will set the KVM_REQ_MMU_RELOAD bit initially,
thus preventing the bug.
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Julius Niedworok <jniedwor@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
There are bug reports about miscounting uncore counters on some
client machines like Sandybridge, Broadwell and Skylake. It is
very likely to be observed on idle systems.
This issue is caused by a hardware issue. PERF_GLOBAL_CTL could be
cleared after Package C7, and nothing will be count.
The related errata (HSD 158) could be found in:
www.intel.com/content/dam/www/public/us/en/documents/specification-updates/4th-gen-core-family-desktop-specification-update.pdf
This patch tries to work around this issue by re-enabling PERF_GLOBAL_CTL
in ->enable_box(). The workaround does not cover all cases. It helps for new
events after returning from C7. But it cannot prevent C7, it will still
miscount if a counter is already active.
There is no drawback in leaving it enabled, so it does not need
disable_box() here.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1470925874-59943-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Some AMD fixes and remove workaround now we have pcieport pm.
* 'drm-fixes-4.8' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: Fix memory trashing if UVD ring test fails
drm/amdgpu: fix vm init error path
Revert "drm/radeon: work around lack of upstream ACPI support for D3cold"
Revert "drm/amdgpu: work around lack of upstream ACPI support for D3cold"
Simple amdkfd fix.
* tag 'drm-amdkfd-fixes-2016-08-09' of git://people.freedesktop.org/~gabbayo/linux:
drm/amdkfd: print doorbell offset as a hex value
Coverity reports:
result_independent_of_operands: data->features & (65536UL /* 1UL << 16 */)
is always 0 regardless of the values of its operands. This occurs as the
logical operand of if.
data->features needs to be 32 bit wide since there are more than 16 features.
Fixes: cc18da79d9 ("hwmon: (it87) Support up to 6 temperature sensors ... ");
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
According to the datasheet, SDn clocks are from the SDSRC clock. And
the SDSRC has a 1/2 divider. So, we should have ".sdsrc" as an internal
core clock. Otherwise, since the sdhi driver will calculate clock for
a sd card using the wrong parent clock rate, and then performance will
be not good.
Fixes: 90c073e539 ("clk: shmobile: r8a7795: Add SD divider support")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Dirk Behme <dirk.behme@de.bosch.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Merge fixes from Andrew Morton:
"7 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/memory_hotplug.c: initialize per_cpu_nodestats for hotadded pgdats
mm, oom: fix uninitialized ret in task_will_free_mem()
kasan: remove the unnecessary WARN_ONCE from quarantine.c
mm: memcontrol: fix memcg id ref counter on swap charge move
mm: memcontrol: fix swap counter leak on swapout from offline cgroup
proc, meminfo: use correct helpers for calculating LRU sizes in meminfo
mm/hugetlb: fix incorrect hugepages count during mem hotplug
Pull ARM SoC fixes from Arnd Bergmann:
"A couple of bug fixes have come in for v4.8 so far. Since the first
few were originally meant to go into -rc1 (but didn't get sent in time
for travel reasons), the branch is unfortunately based on top of a
commit in the middle of the merge window rather than -rc1.
Content-wise we have:
- a fix for the last remaining broken build in kernelci, getting
mach-shmobile to build again with SMP disabled
- a fix for a realview regression that broke real hardware but not
the qemu model that everyone uses in practice (needed for v4.7 as
well)
- a merge conflict fix for Tegra that also broke v4.7
- two Kconfig fixes for arm64 build regressions
- a couple of arm32 build warning fixes (all harmless)
- fix the RTC on Exynos7 Espresso (which apparently never worked
right)"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
Merge tag 'pxa-fixes-v4.8' of https://github.com/rjarzmik/linux into randconfig-4.8
arm64: Kconfig: select HISILICON_IRQ_MBIGEN only if PCI is selected
arm64: Kconfig: select ALPINE_MSI only if PCI is selected
ARM: dts: realview: Fix PBX-A9 cache description
ARM: tegra: fix erroneous address in dts
ARM: dts: add syscon compatible string for AP syscon
ARM: dts: add syscon compatible string for CP syscon
ARM: oxnas: select reset controller framework
ARM: hide mach-*/ include for ARM_SINGLE_ARMV7M
ARM: don't include removed directories
Revert "ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME"
ARM: shmobile: don't call platform_can_secondary_boot on UP
MAINTAINER: alpine: add a mailing list
ARM: do away with final ARCH_REQUIRE_GPIOLIB
arm64: dts: Fix RTC by providing rtc_src clock
Pull virtio/vhost fixes and cleanups from Michael Tsirkin:
"Misc fixes and cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio/s390: deprecate old transport
virtio/s390: keep early_put_chars
virtio_blk: Fix a slient kernel panic
virtio-vsock: fix include guard typo
vhost/vsock: fix vhost virtio_vsock_pkt use-after-free
9p/trans_virtio: use kvfree() for iov_iter_get_pages_alloc()
virtio: fix error handling for debug builds
virtio: fix memory leak in virtqueue_add()
Pull ceph fixes from Ilya Dryomov:
"A patch for a NULL dereference bug introduced in 4.8-rc1 and a handful
of static checker fixes"
* tag 'ceph-for-4.8-rc2' of https://github.com/ceph/ceph-client:
ceph: initialize pathbase in the !dentry case in encode_caps_cb()
rbd: nuke the 32-bit pool id check
rbd: destroy header_oloc in rbd_dev_release()
ceph: fix null pointer dereference in ceph_flush_snaps()
libceph: using kfree_rcu() to simplify the code
libceph: make cancel_generic_request() static
libceph: fix return value check in alloc_msg_with_page_vector()
When running LTP's nfslock01 test, the Linux client can send a LOCK
and a FREE_STATEID request at the same time. The outcome is:
Frame 324 R OPEN stateid [2,O]
Frame 115004 C LOCK lockowner_is_new stateid [2,O] offset 672000 len 64
Frame 115008 R LOCK stateid [1,L]
Frame 115012 C WRITE stateid [0,L] offset 672000 len 64
Frame 115016 R WRITE NFS4_OK
Frame 115019 C LOCKU stateid [1,L] offset 672000 len 64
Frame 115022 R LOCKU NFS4_OK
Frame 115025 C FREE_STATEID stateid [2,L]
Frame 115026 C LOCK lockowner_is_new stateid [2,O] offset 672128 len 64
Frame 115029 R FREE_STATEID NFS4_OK
Frame 115030 R LOCK stateid [3,L]
Frame 115034 C WRITE stateid [0,L] offset 672128 len 64
Frame 115038 R WRITE NFS4ERR_BAD_STATEID
In other words, the server returns stateid L in a successful LOCK
reply, but it has already released it. Subsequent uses of stateid L
fail.
To address this, protect the generation check in nfsd4_free_stateid
with the st_mutex. This should guarantee that only one of two
outcomes occurs: either LOCK returns a fresh valid stateid, or
FREE_STATEID returns NFS4ERR_LOCKS_HELD.
Reported-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Fix-suggested-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Tested-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
irq already contains the interrupt number for the port, don't add the
port index to it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: d684a90d38 ("ahci: per-port msix support")
Cc: stable@vger.kernel.org v4.5+
macsec_notify() loops over the list of macsec devices configured on the
underlying device when this device is being removed. This list is part
of the rx_handler data.
However, macsec_dellink unregisters the rx_handler and frees the
rx_handler data when the last macsec device is removed from the
underlying device.
Add macsec_common_dellink() to delete macsec devices without
unregistering the rx_handler and freeing the associated data.
Fixes: 960d5848db ("macsec: fix memory leaks around rx_handler (un)registration")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
We've clean skb_array in macvtap_put_queue() but still try to pop from
it during macvtap_sock_destruct(). Fix this use after free by moving
the skb array cleanup to macvtap_sock_destruct() instead.
Fixes: 362899b872 ("macvtap: switch to use skb array")
Reported-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we need to move xattrs into external xattr block, we call
ext4_xattr_block_set() from ext4_expand_extra_isize_ea(). That may end
up calling ext4_mark_inode_dirty() again which will recurse back into
the inode expansion code leading to deadlocks.
Protect from recursion using EXT4_STATE_NO_EXPAND inode flag and move
its management into ext4_expand_extra_isize_ea() since its manipulation
is safe there (due to xattr_sem) from possible races with
ext4_xattr_set_handle() which plays with it as well.
CC: stable@vger.kernel.org # 4.4.x
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Because the arm64 calling standard allows stacked function arguments to be
anywhere in the stack frame, do not attempt to duplicate the stack frame for
jprobes handler functions.
Documentation changes to describe this issue have been broken out into a
separate patch in order to simultaneously address them in other
architecture(s).
Signed-off-by: David A. Long <dave.long@linaro.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In sg_timeout(), req->status is set to "-ETIMEDOUT" before calling
into usb_sg_cancel(). usb_sg_cancel() will do nothing and return
directly if req->status has been set to a non-zero value. This will
cause driver hang whenever transfer time out is triggered.
This patch fixes this issue. It could be backported to stable kernel
with version later than v3.15.
Cc: stable@vger.kernel.org # 3.15+
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felipe writes:
usb: fixes for v4.8-rc1
First set of fixes for v4.8-rc cycle. Again, dwc3 is
the most active driver with over 60% of this pull
request touching it.
The most important fixes are related to scatterlist
usage with dwc3. Before this pull request, we were
increment request->actual multiple times and this
would result in request->actual being larger than
request->length.
Also, if a we received a short packet midway through
processing a scatterlist, we were not clearning HWO
bit as we should.
Other than the large dwc3 scatterlist fixes, we have
a new Device ID for Intel's Kabylake silicon.
Other drivers, such as fsl_qe_udc and renesas udc,
also got a few minor fixes. Details are in shortlog.
We did not count with the padding of xattr value when computing desired
shift of xattrs in the inode when expanding i_extra_isize. As a result
we could create unaligned start of inline xattrs. Account for alignment
properly.
CC: stable@vger.kernel.org # 4.4.x-
Signed-off-by: Jan Kara <jack@suse.cz>
When multiple xattrs need to be moved out of inode, we did not properly
recompute total size of xattr headers in the inode and the new header
position. Thus when moving the second and further xattr we asked
ext4_xattr_shift_entries() to move too much and from the wrong place,
resulting in possible xattr value corruption or general memory
corruption.
CC: stable@vger.kernel.org # 4.4.x
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The code in ext4_expand_extra_isize_ea() treated new_extra_isize
argument sometimes as the desired target i_extra_isize and sometimes as
the amount by which we need to grow current i_extra_isize. These happen
to coincide when i_extra_isize is 0 which used to be the common case and
so nobody noticed this until recently when we added i_projid to the
inode and so i_extra_isize now needs to grow from 28 to 32 bytes.
The result of these bugs was that we sometimes unnecessarily decided to
move xattrs out of inode even if there was enough space and we often
ended up corrupting in-inode xattrs because arguments to
ext4_xattr_shift_entries() were just wrong. This could demonstrate
itself as BUG_ON in ext4_xattr_shift_entries() triggering.
Fix the problem by introducing new isize_diff variable and use it where
appropriate.
CC: stable@vger.kernel.org # 4.4.x
Reported-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
b44061d0b9 introduced a dentry ref counting bug. Previously we were
grabbing one ref to dchild in nfsd_create(), but with the creation of
nfsd_create_locked() we have a ref for dchild from the lookup in
nfsd_create(), and then another ref in nfsd_create_locked(). The ref
from the lookup in nfsd_create() is never dropped and results in
dentries still in use at unmount.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Fixes: b44061d0b9 "nfsd: reorganize nfsd_create"
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Due to the (indirect) nesting of min(..., min(...)), sparse will
show a variable shadowing warning whenever bvec.h is included.
Avoid that by assigning the inner min() to a temporary variable first.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Add descriptions for dax, io_poll, and write_same_max_bytes files.
Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
When nvme_delete_queue fails in the first pass of the
nvme_disable_io_queues() loop, we return early, failing to suspend all
of the IO queues. Later, on the nvme_pci_disable path, this causes us
to disable MSI without actually having freed all the IRQs, which
triggers the BUG_ON in free_msi_irqs(), as show below.
This patch refactors nvme_disable_io_queues to suspend all queues before
start submitting delete queue commands. This way, we ensure that we
have at least returned every IRQ before continuing with the removal
path.
[ 487.529200] kernel BUG at ../drivers/pci/msi.c:368!
cpu 0x46: Vector: 700 (Program Check) at [c0000078c5b83650]
pc: c000000000627a50: free_msi_irqs+0x90/0x200
lr: c000000000627a40: free_msi_irqs+0x80/0x200
sp: c0000078c5b838d0
msr: 9000000100029033
current = 0xc0000078c5b40000
paca = 0xc000000002bd7600 softe: 0 irq_happened: 0x01
pid = 1376, comm = kworker/70:1H
kernel BUG at ../drivers/pci/msi.c:368!
Linux version 4.7.0.mainline+ (root@iod76) (gcc version 5.3.1 20160413
(Ubuntu/IBM 5.3.1-14ubuntu2.1) ) #104 SMP Fri Jul 29 09:20:17 CDT 2016
enter ? for help
[c0000078c5b83920] d0000000363b0cd8 nvme_dev_disable+0x208/0x4f0 [nvme]
[c0000078c5b83a10] d0000000363b12a4 nvme_timeout+0xe4/0x250 [nvme]
[c0000078c5b83ad0] c0000000005690e4 blk_mq_rq_timed_out+0x64/0x110
[c0000078c5b83b40] c00000000056c930 bt_for_each+0x160/0x170
[c0000078c5b83bb0] c00000000056d928 blk_mq_queue_tag_busy_iter+0x78/0x110
[c0000078c5b83c00] c0000000005675d8 blk_mq_timeout_work+0xd8/0x1b0
[c0000078c5b83c50] c0000000000e8cf0 process_one_work+0x1e0/0x590
[c0000078c5b83ce0] c0000000000e9148 worker_thread+0xa8/0x660
[c0000078c5b83d80] c0000000000f2090 kthread+0x110/0x130
[c0000078c5b83e30] c0000000000095f0 ret_from_kernel_thread+0x5c/0x6c
Signed-off-by: Gabriel Krisman Bertazi <krisman@linux.vnet.ibm.com>
Cc: Brian King <brking@linux.vnet.ibm.com>
Cc: Keith Busch <keith.busch@intel.com>
Cc: linux-nvme@lists.infradead.org
Signed-off-by: Jens Axboe <axboe@fb.com>
Anything that sets ret in wm2000_anc_transition will have immediately
returned anyway as such we will always return an uninitialised ret at the
bottom of the function. Simply replace the return with a return 0;
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If we fail to find a platform we simply return EPROBE_DEFER,
but we have allocated the rtd pointer. All error paths before
soc_add_pcm_runtime need to call soc_free_pcm_runtime first to
avoid leaking the rtd pointer. A suitable error path already
exists and is used else where in the function so simply use that
here as well.
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
stop consuming TRBs when we reach one with HWO bit
already set. This will prevent us from prematurely
retiring a TRB.
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
According to Synopsys Databook 2.60a, section 8.3.4,
it's stated that:
The LST bit should be set to 0 (isochronous
transfers normally continue until the
endpoint is removed entirely, at which time
an End Transfer command is used to stop the
transfer).
This patch makes sure that detail is observed and
fixes a regression with Android Audio playback
caused by recent changes to DWC3 gadget.
Signed-off-by: Janusz Dziedzic <januszx.dziedzic@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
When rndis data transfer is in progress, some Windows7 Host PC is not
sending the GET_ENCAPSULATED_RESPONSE command for receiving the response
for the previous SEND_ENCAPSULATED_COMMAND processed.
The rndis function driver appends each response for the
SEND_ENCAPSULATED_COMMAND in a queue. As the above process got corrupted,
the Host sends a REMOTE_NDIS_RESET_MSG command to do a soft-reset.
As the rndis response queue is not freed, the previous response is sent
as a part of this REMOTE_NDIS_RESET_MSG's reset response and the Host
block any more Rndis transfers.
Hence free the rndis response queue as a part of this soft-reset so that
the correct response for REMOTE_NDIS_RESET_MSG is sent properly during the
response command.
Signed-off-by: Rajkumar Raghupathy <raghup@codeaurora.org>
Signed-off-by: Xerox Lin <xerox_lin@htc.com>
[AmitP: Cherry-picked this patch and folded other relevant
fixes from Android common kernel android-4.4]
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
The udc device needs to be deleted if error occurs
Fixes: 855ed04a37 ("usb: gadget: udc-core: independent registration of
gadgets and gadget drivers")
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
In 'composite_os_desc_req_prepare', if one of the memory allocations fail,
0 will be returned, which means success.
We should return -ENOMEM instead.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
When reading synchronously from a non-zero endpoint, gadgetfs will
return -EFAULT even if the read succeeds, due to a bad check of the
copy_to_iter() return value.
This fix compares the return value of copy_to_iter to the amount of
bytes that was passed, and only fails if they are not the same.
Signed-off-by: Binyamin Sharet <s.binyamin@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
For case 14 and case 21, their correct return value is the number
of bytes transferred, so it is a positive integer. But in usbtest_ioctl,
it takes non-zero as false return value for usbtest_do_ioctl, so
it will treat the correct test as wrong test, then the time on
tests will be the minus value.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Cc: stable <stable@vger.kernel.org>
Fixes: 18fc4ebdc7 ("usb: misc: usbtest: Remove timeval usage")
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Add missing platform_set_drvdata() in dwc3_of_simple_probe(), otherwise
calling platform_get_drvdata() in remove returns NULL.
This is detected by Coccinelle semantic patch.
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Add missing platform_set_drvdata() in omap_otg_probe(), otherwise
calling platform_get_drvdata() in remove returns NULL.
This is detected by Coccinelle semantic patch.
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
There may be a race condition if f_fs calls unregister_gadget_item in
ffs_closed() when unregister_gadget is called by UDC store at the same time.
this leads to a kernel NULL pointer dereference:
[ 310.644928] Unable to handle kernel NULL pointer dereference at virtual address 00000004
[ 310.645053] init: Service 'adbd' is being killed...
[ 310.658938] pgd = c9528000
[ 310.662515] [00000004] *pgd=19451831, *pte=00000000, *ppte=00000000
[ 310.669702] Internal error: Oops: 817 [#1] PREEMPT SMP ARM
[ 310.675211] Modules linked in:
[ 310.678294] CPU: 0 PID: 1537 Comm: ->transport Not tainted 4.1.15-03725-g793404c #2
[ 310.685958] Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree)
[ 310.692493] task: c8e24200 ti: c945e000 task.ti: c945e000
[ 310.697911] PC is at usb_gadget_unregister_driver+0xb4/0xd0
[ 310.703502] LR is at __mutex_lock_slowpath+0x10c/0x16c
[ 310.708648] pc : [<c075efc0>] lr : [<c0bfb0bc>] psr: 600f0113
<snip..>
[ 311.565585] [<c075efc0>] (usb_gadget_unregister_driver) from [<c075e2b8>] (unregister_gadget_item+0x1c/0x34)
[ 311.575426] [<c075e2b8>] (unregister_gadget_item) from [<c076fcc8>] (ffs_closed+0x8c/0x9c)
[ 311.583702] [<c076fcc8>] (ffs_closed) from [<c07736b8>] (ffs_data_reset+0xc/0xa0)
[ 311.591194] [<c07736b8>] (ffs_data_reset) from [<c07738ac>] (ffs_data_closed+0x90/0xd0)
[ 311.599208] [<c07738ac>] (ffs_data_closed) from [<c07738f8>] (ffs_ep0_release+0xc/0x14)
[ 311.607224] [<c07738f8>] (ffs_ep0_release) from [<c023e030>] (__fput+0x80/0x1d0)
[ 311.614635] [<c023e030>] (__fput) from [<c014e688>] (task_work_run+0xb0/0xe8)
[ 311.621788] [<c014e688>] (task_work_run) from [<c010afdc>] (do_work_pending+0x7c/0xa4)
[ 311.629718] [<c010afdc>] (do_work_pending) from [<c010770c>] (work_pending+0xc/0x20)
for functions using functionFS, i.e. android adbd will close /dev/usb-ffs/adb/ep0
when usb IO thread fails, but switch adb from on to off also triggers write
"none" > UDC. These 2 operations both call unregister_gadget, which will lead
to the panic above.
add a mutex before calling unregister_gadget for api used in f_fs.
Signed-off-by: Winter Wang <wente.wang@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
dev->port_usb is checked for null pointer at above code, so dev->port_usb
might be null, fix it by adding null pointer check.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
cdev->config is checked for null pointer at above code, so cdev->config
might be null, fix it by adding null pointer check.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
This patch fixes an issue that isochronous transfer's data is possible to
be lost as a workaround. Since this driver uses a workqueue to start
the dmac, the transfer is possible to be delayed when system load is high.
Fixes: 6e4b74e469 ("usb: renesas: fix scheduling in atomic context bug")
Cc: <stable@vger.kernel.org> # v3.4+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
This patch fixes an issue that unexpected BRDY interruption happens
when the usb_ep_{enable,disable}() are called with different direction.
In this case, the driver will cause the following message:
renesas_usbhs e6590000.usb: irq_ready run_error 1 : -16
This issue causes the followings:
1) A pipe is enabled as transmission
2) The pipe sent a data
3) The pipe is disabled and re-enabled as reception.
4) The pipe got a queue
Since the driver doesn't clear the BRDYSTS flags after 2) above, the issue
happens. If we add such clearing the flags into the driver, the code will
become complicate. So, this patch clears the BRDYSTS flag of reception in
usbhsg_ep_enable() to avoid complicate.
Cc: <stable@vger.kernel.org> # v4.1+ (usbhs_xxxsts_clear() is needed)
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Since R-Car Gen3 SoC has the USB-DMAC, this driver should set
dparam->has_usb_dmac to 1. Otherwise, behavior of this driver and
the usb-dmac driver will be mismatch, then sometimes receiving data will
be corrupt.
Fixes: de18757e27 ("usb: renesas_usbhs: add R-Car Gen3 power control")
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
This problem has actually been in the UV code for a while, but we didn't
catch it until recently, because we had been relying on EFI_OLD_MEMMAP
to allow our systems to boot for a period of time. We noticed the issue
when trying to kexec a recent community kernel, where we hit this NULL
pointer dereference in efi_sync_low_kernel_mappings():
[ 0.337515] BUG: unable to handle kernel NULL pointer dereference at 0000000000000880
[ 0.346276] IP: [<ffffffff8105df8d>] efi_sync_low_kernel_mappings+0x5d/0x1b0
The problem doesn't show up with EFI_OLD_MEMMAP because we skip the
chunk of setup_efi_state() that sets the efi_loader_signature for the
kexec'd kernel. When the kexec'd kernel boots, it won't set EFI_BOOT in
setup_arch, so we completely avoid the bug.
We always kexec with noefi on the command line, so this shouldn't be an
issue, but since we're not actually checking for efi_runtime_disabled in
uv_bios_init(), we end up trying to do EFI runtime callbacks when we
shouldn't be. This patch just adds a check for efi_runtime_disabled in
uv_bios_init() so that we don't map in uv_systab when runtime_disabled ==
true.
Signed-off-by: Alex Thorlton <athorlton@sgi.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: <stable@vger.kernel.org> # v4.7
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Travis <travis@sgi.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russ Anderson <rja@sgi.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/1470912120-22831-2-git-send-email-matt@codeblueprint.co.uk
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On my Dell XPS 13 9350 with firmware 1.4.4 and SGX on, if I boot
Fedora 24's grub2-efi off a hard disk, my first 1MB of RAM looks
like:
efi: mem00: [Runtime Data |RUN| | | | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000000fff] (0MB)
efi: mem01: [Boot Data | | | | | | | | |WB|WT|WC|UC] range=[0x0000000000001000-0x0000000000027fff] (0MB)
efi: mem02: [Loader Data | | | | | | | | |WB|WT|WC|UC] range=[0x0000000000028000-0x0000000000029fff] (0MB)
efi: mem03: [Reserved | | | | | | | | |WB|WT|WC|UC] range=[0x000000000002a000-0x000000000002bfff] (0MB)
efi: mem04: [Runtime Data |RUN| | | | | | | |WB|WT|WC|UC] range=[0x000000000002c000-0x000000000002cfff] (0MB)
efi: mem05: [Loader Data | | | | | | | | |WB|WT|WC|UC] range=[0x000000000002d000-0x000000000002dfff] (0MB)
efi: mem06: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x000000000002e000-0x0000000000057fff] (0MB)
efi: mem07: [Reserved | | | | | | | | |WB|WT|WC|UC] range=[0x0000000000058000-0x0000000000058fff] (0MB)
efi: mem08: [Conventional Memory| | | | | | | | |WB|WT|WC|UC] range=[0x0000000000059000-0x000000000009ffff] (0MB)
My EBDA is at 0x2c000, which blocks off everything from 0x2c000 and
up, and my trampoline is 0x6000 bytes (6 pages), so it doesn't fit
in the loader data range at 0x28000.
Without this patch, it panics due to a failure to allocate the
trampoline. With this patch, it works:
[ +0.001744] Base memory trampoline at [ffff880000001000] 1000 size 24576
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Cc: Matt Fleming <mfleming@suse.de>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/998c77b3bf709f3dfed85cb30701ed1a5d8a438b.1470821230.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Running LTP 'icmp-uni-basic.sh -6 -p ipcomp -m tunnel' test over
openvswitch + veth can trigger kernel panic:
BUG: unable to handle kernel NULL pointer dereference
at 00000000000000e0 IP: [<ffffffff8169d1d2>] xfrm_input+0x82/0x750
...
[<ffffffff816d472e>] xfrm6_rcv_spi+0x1e/0x20
[<ffffffffa082c3c2>] xfrm6_tunnel_rcv+0x42/0x50 [xfrm6_tunnel]
[<ffffffffa082727e>] tunnel6_rcv+0x3e/0x8c [tunnel6]
[<ffffffff8169f365>] ip6_input_finish+0xd5/0x430
[<ffffffff8169fc53>] ip6_input+0x33/0x90
[<ffffffff8169f1d5>] ip6_rcv_finish+0xa5/0xb0
...
It seems that tunnel.ip6 can have garbage values and also dereferenced
without a proper check, only tunnel.ip4 is being verified. Fix it by
adding one more if block for AF_INET6 and initialize tunnel.ip6 with NULL
inside xfrm6_rcv_spi() (which is similar to xfrm4_rcv_spi()).
Fixes: 049f8e2 ("xfrm: Override skb->mark with tunnel->parm.i_key in xfrm_input")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The initialization process for trampoline_cr4_features and
mmu_cr4_features was confusing. The intent is for mmu_cr4_features
and *trampoline_cr4_features to stay in sync, but
trampoline_cr4_features is NULL until setup_real_mode() runs. The
old code synchronized *trampoline_cr4_features *twice*, once in
setup_real_mode() and once in setup_arch(). It also initialized
mmu_cr4_features in setup_real_mode(), which causes the actual value
of mmu_cr4_features to potentially depend on when setup_real_mode()
is called.
With this patch, mmu_cr4_features is initialized directly in
setup_arch(), and *trampoline_cr4_features is synchronized to
mmu_cr4_features when the trampoline is set up.
After this patch, it should be safe to defer setup_real_mode().
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mario Limonciello <mario_limonciello@dell.com>
Cc: Matt Fleming <mfleming@suse.de>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/d48a263f9912389b957dd495a7127b009259ffe0.1470821230.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Since commit:
52aec3308d ("x86/tlb: replace INVALIDATE_TLB_VECTOR by CALL_FUNCTION_VECTOR")
the TLB remote shootdown is done through call function vector. That
commit didn't take care of irq_tlb_count, which a later commit:
fd0f586972 ("x86: Distinguish TLB shootdown interrupts from other functions call interrupts")
... tried to fix.
The fix assumes every increase of irq_tlb_count has a corresponding
increase of irq_call_count. So the irq_call_count is always bigger than
irq_tlb_count and we could substract irq_tlb_count from irq_call_count.
Unfortunately this is not true for the smp_call_function_single() case.
The IPI is only sent if the target CPU's call_single_queue is empty when
adding a csd into it in generic_exec_single. That means if two threads
are both adding flush tlb csds to the same CPU's call_single_queue, only
one IPI is sent. In other words, the irq_call_count is incremented by 1
but irq_tlb_count is incremented by 2. Over time, irq_tlb_count will be
bigger than irq_call_count and the substract will produce a very large
irq_call_count value due to overflow.
Considering that:
1) it's not worth to send more IPIs for the sake of accurate counting of
irq_call_count in generic_exec_single();
2) it's not easy to tell if the call function interrupt is for TLB
shootdown in __smp_call_function_single_interrupt().
Not to exclude TLB shootdown from call function count seems to be the
simplest fix and this patch just does that.
This bug was found by LKP's cyclic performance regression tracking recently
with the vm-scalability test suite. I have bisected to commit:
3dec0ba0be ("mm/rmap: share the i_mmap_rwsem")
This commit didn't do anything wrong but revealed the irq_call_count
problem. IIUC, the commit makes rwc->remap_one in rmap_walk_file
concurrent with multiple threads. When remap_one is try_to_unmap_one(),
then multiple threads could queue flush TLB to the same CPU but only
one IPI will be sent.
Since the commit was added in Linux v3.19, the counting problem only
shows up from v3.19 onwards.
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
Cc: Alex Shi <alex.shi@linaro.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tomoki Sekiyama <tomoki.sekiyama.qu@hitachi.com>
Link: http://lkml.kernel.org/r/20160811074430.GA18163@aaronlu.sh.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On LPAR the read message buffer command should be executed on the path
it was received on otherwise there is a chance that the CUIR assignment
might be faulty and the wrong channel path is set online/offline.
Fix by setting the path mask accordingly.
On z/VM we might not be able to do I/O on this path but there it does
not matter on which path the read message buffer command is executed.
Therefor implement a retry with an open path mask.
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
This is the pxa changes for v4.8 cycle.
This is a tiny fix couple to enable changes in includes in
gpio API without breaking pxa boards.
* tag 'pxa-fixes-v4.8' of https://github.com/rjarzmik/linux:
ARM: pxa: add module.h for corgi symbol_get/symbol_put usage
ARM: pxa: add module.h for spitz symbol_get/symbol_put usage
ARM SMCCC is only set for ARMv7 and ARMv8 CPUs, but we currently
allow the driver to be build for older architecture levels as
well, which results in a link failure:
drivers/gpu/built-in.o: In function `mtk_hdmi_hw_make_reg_writable':
:(.text+0x1e737c): undefined reference to `arm_smccc_smc'
This adds a Kconfig dependency. The patch applies on my two
previous fixes that are not yet applied, so please apply all
three to get randconfig builds to work correctly.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 8f83f26891 ("drm/mediatek: Add HDMI support")
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The mediatek DRM driver can be configured for compile testing with
CONFIG_OF disabled, but then fails to link:
drivers/gpu/built-in.o: In function `mtk_drm_bind':
analogix_dp_reg.c:(.text+0x52888): undefined reference to `of_find_device_by_node'
analogix_dp_reg.c:(.text+0x52930): undefined reference to `of_find_device_by_node'
This adds an explicit Kconfig dependency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.kernel.org/patch/9120871/
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
On kernel builds without COMMON_CLK, the newly added mediatek drm
driver fails to build:
drivers/gpu/drm/mediatek/mtk_mipi_tx.c:130:16: error: field 'pll_hw' has incomplete type
struct clk_hw pll_hw;
^~~~~~
In file included from ../include/linux/clk.h:16:0,
from ../drivers/gpu/drm/mediatek/mtk_mipi_tx.c:14:
drivers/gpu/drm/mediatek/mtk_mipi_tx.c: In function 'mtk_mipi_tx_from_clk_hw':
include/linux/kernel.h:831:48: error: initialization from incompatible pointer type [-Werror=incompatible-pointer-types]
const typeof( ((type *)0)->member ) *__mptr = (ptr); \
^
/drivers/gpu/drm/mediatek/mtk_mipi_tx.c:136:9: note: in expansion of macro 'container_of'
return container_of(hw, struct mtk_mipi_tx, pll_hw);
^~~~~~~~~~~~
drivers/gpu/drm/mediatek/mtk_mipi_tx.c: At top level:
drivers/gpu/drm/mediatek/mtk_mipi_tx.c:302:21: error: variable 'mtk_mipi_tx_pll_ops' has initializer but incomplete type
static const struct clk_ops mtk_mipi_tx_pll_ops = {
This adds the required Kconfig dependency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.kernel.org/patch/9069061/
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The creation of a tunnel vport (geneve, gre, vxlan) brings up a
corresponding netdev, a multi-step operation which can fail.
For example, changing a vxlan vport's netdev state to 'up' binds the
vport's socket to a UDP port - if the binding fails (e.g. due to the
port being in use), the error is currently ignored giving the
appearance that the tunnel vport creation completed successfully.
Signed-off-by: Martynas Pumputis <martynas@weave.works>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit b195d5e2bf ("ipr: Wait to do async scan until scsi host is
initialized") fixed async scan for ipr, but broke sync scan. This fixes
sync scan back up.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Found one megaraid_sas HBA probe fails,
[ 187.235190] scsi host2: Avago SAS based MegaRAID driver
[ 191.112365] megaraid_sas 0000:89:00.0: BAR 0: can't reserve [io 0x0000-0x00ff]
[ 191.120548] megaraid_sas 0000:89:00.0: IO memory region busy!
and the card has resource like,
[ 125.097714] pci 0000:89:00.0: [1000:005d] type 00 class 0x010400
[ 125.104446] pci 0000:89:00.0: reg 0x10: [io 0x0000-0x00ff]
[ 125.110686] pci 0000:89:00.0: reg 0x14: [mem 0xce400000-0xce40ffff 64bit]
[ 125.118286] pci 0000:89:00.0: reg 0x1c: [mem 0xce300000-0xce3fffff 64bit]
[ 125.125891] pci 0000:89:00.0: reg 0x30: [mem 0xce200000-0xce2fffff pref]
that does not io port resource allocated from BIOS, and kernel can not
assign one as io port shortage.
The driver is only looking for MEM, and should not fail.
It turns out megasas_init_fw() etc are using bar index as mask. index 1
is used as mask 1, so that pci_request_selected_regions() is trying to
request BAR0 instead of BAR1.
Fix all related reference.
Fixes: b6d5d8808b ("megaraid_sas: Use lowest memory bar for SR-IOV VF support")
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In commit cf6f7e1d51 ("tipc: dump monitor attributes"),
I dereferenced a pointer before checking if its valid.
This is reported by static check Smatch as:
net/tipc/monitor.c:733 tipc_nl_add_monitor_peer()
warn: variable dereferenced before check 'mon' (see line 731)
In this commit, we check for a valid monitor before proceeding
with any other operation.
Fixes: cf6f7e1d51 ("tipc: dump monitor attributes")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge misc fixes from Andrew Morton:
"8 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/slub.c: run free_partial() outside of the kmem_cache_node->list_lock
rmap: fix compound check logic in page_remove_file_rmap
mm, rmap: fix false positive VM_BUG() in page_add_file_rmap()
mm/page_alloc.c: recalculate some of node threshold when on/offline memory
mm/page_alloc.c: fix wrong initialization when sysctl_min_unmapped_ratio changes
thp: move shmem_huge_enabled() outside of SYSFS ifdef
revert "ARM: keystone: dts: add psci command definition"
rapidio: dereferencing an error pointer
With debugobjects enabled and using SLAB_DESTROY_BY_RCU, when a
kmem_cache_node is destroyed the call_rcu() may trigger a slab
allocation to fill the debug object pool (__debug_object_init:fill_pool).
Everywhere but during kmem_cache_destroy(), discard_slab() is performed
outside of the kmem_cache_node->list_lock and avoids a lockdep warning
about potential recursion:
=============================================
[ INFO: possible recursive locking detected ]
4.8.0-rc1-gfxbench+ #1 Tainted: G U
---------------------------------------------
rmmod/8895 is trying to acquire lock:
(&(&n->list_lock)->rlock){-.-...}, at: [<ffffffff811c80d7>] get_partial_node.isra.63+0x47/0x430
but task is already holding lock:
(&(&n->list_lock)->rlock){-.-...}, at: [<ffffffff811cbda4>] __kmem_cache_shutdown+0x54/0x320
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(&n->list_lock)->rlock);
lock(&(&n->list_lock)->rlock);
*** DEADLOCK ***
May be due to missing lock nesting notation
5 locks held by rmmod/8895:
#0: (&dev->mutex){......}, at: driver_detach+0x42/0xc0
#1: (&dev->mutex){......}, at: driver_detach+0x50/0xc0
#2: (cpu_hotplug.dep_map){++++++}, at: get_online_cpus+0x2d/0x80
#3: (slab_mutex){+.+.+.}, at: kmem_cache_destroy+0x3c/0x220
#4: (&(&n->list_lock)->rlock){-.-...}, at: __kmem_cache_shutdown+0x54/0x320
stack backtrace:
CPU: 6 PID: 8895 Comm: rmmod Tainted: G U 4.8.0-rc1-gfxbench+ #1
Hardware name: Gigabyte Technology Co., Ltd. H87M-D3H/H87M-D3H, BIOS F11 08/18/2015
Call Trace:
__lock_acquire+0x1646/0x1ad0
lock_acquire+0xb2/0x200
_raw_spin_lock+0x36/0x50
get_partial_node.isra.63+0x47/0x430
___slab_alloc.constprop.67+0x1a7/0x3b0
__slab_alloc.isra.64.constprop.66+0x43/0x80
kmem_cache_alloc+0x236/0x2d0
__debug_object_init+0x2de/0x400
debug_object_activate+0x109/0x1e0
__call_rcu.constprop.63+0x32/0x2f0
call_rcu+0x12/0x20
discard_slab+0x3d/0x40
__kmem_cache_shutdown+0xdb/0x320
shutdown_cache+0x19/0x60
kmem_cache_destroy+0x1ae/0x220
i915_gem_load_cleanup+0x14/0x40 [i915]
i915_driver_unload+0x151/0x180 [i915]
i915_pci_remove+0x14/0x20 [i915]
pci_device_remove+0x34/0xb0
__device_release_driver+0x95/0x140
driver_detach+0xb6/0xc0
bus_remove_driver+0x53/0xd0
driver_unregister+0x27/0x50
pci_unregister_driver+0x25/0x70
i915_exit+0x1a/0x1e2 [i915]
SyS_delete_module+0x193/0x1f0
entry_SYSCALL_64_fastpath+0x1c/0xac
Fixes: 52b4b950b5 ("mm: slab: free kmem_cache_node after destroy sysfs file")
Link: http://lkml.kernel.org/r/1470759070-18743-1-git-send-email-chris@chris-wilson.co.uk
Reported-by: Dave Gordon <david.s.gordon@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Gordon <david.s.gordon@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The newly introduced shmem_huge_enabled() function has two definitions,
but neither of them is visible if CONFIG_SYSFS is disabled, leading to a
build error:
mm/khugepaged.o: In function `khugepaged':
khugepaged.c:(.text.khugepaged+0x3ca): undefined reference to `shmem_huge_enabled'
This changes the #ifdef guards around the definition to match those that
are used in the header file.
Fixes: e496cf3d78 ("thp: introduce CONFIG_TRANSPARENT_HUGE_PAGECACHE")
Link: http://lkml.kernel.org/r/20160809123638.1357593-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The unit tests crash when hotplug races the previous probe. This race
requires that the loading of the nfit_test module be terminated with
SIGTERM, and the module to be unloaded while the ars scan is still
running.
In contrast to the normal nfit driver, the unit test calls
acpi_nfit_init() twice to simulate hotplug, whereas the nominal case
goes through the acpi_nfit_notify() event handler. The
acpi_nfit_notify() path is careful to flush the previous region
registration before servicing the hotplug event. The unit test was
missing this guarantee.
BUG: unable to handle kernel NULL pointer dereference at (null)
IP: [<ffffffff810cdce7>] pwq_activate_delayed_work+0x47/0x170
[..]
Call Trace:
[<ffffffff810ce186>] pwq_dec_nr_in_flight+0x66/0xa0
[<ffffffff810ce490>] process_one_work+0x2d0/0x680
[<ffffffff810ce331>] ? process_one_work+0x171/0x680
[<ffffffff810ce88e>] worker_thread+0x4e/0x480
[<ffffffff810ce840>] ? process_one_work+0x680/0x680
[<ffffffff810ce840>] ? process_one_work+0x680/0x680
[<ffffffff810d5343>] kthread+0xf3/0x110
[<ffffffff8199846f>] ret_from_fork+0x1f/0x40
[<ffffffff810d5250>] ? kthread_create_on_node+0x230/0x230
Cc: <stable@vger.kernel.org>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The condition passed to read*_poll_timeout() is the break condition,
i.e. wait for this condition to happen and return success.
The original code assumed the opposite, resulting in a warning when
the PLL clock rate was changed but never lost it's lock as far as
the readout indicated. This was verified by checking the read out
register value.
Fixes: 1d80c14248 ("clk: sunxi-ng: Add common infrastructure")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This function would call drm_modeset_lock_all, while the suspend/resume
functions already have their own locking. Fix this by factoring out
__intel_display_resume, and calling the atomic helpers for duplicating
atomic state and disabling all crtc's during suspend.
Changes since v1:
- Deal with -EDEADLK right after lock_all and clean up calls
to hw readout.
- Always take all modeset locks so updates during gpu reset are blocked.
Changes since v2:
- Fix deadlock in intel_update_primary_planes.
- Move WARN_ON(EDEADLK) to __intel_display_resume.
- pctx -> ctx
- only call __intel_display_resume on success in intel_display_resume.
Changes since v3:
- Rebase on top of dev_priv -> dev change.
- Use drm_modeset_lock_all_ctx instead of drm_modeset_lock_all.
Changes since v4 [by vsyrjala]:
- Deal with skip_intermediate_wm
- Update comment w.r.t. mode_config.mutex vs. ->detect()
- Rebase due to INTEL_GEN() etc.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: e2c8b8701e ("drm/i915: Use atomic helpers for suspend, v2.")
Cc: stable@vger.kernel.org
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1470428910-12125-2-git-send-email-ville.syrjala@linux.intel.com
(cherry picked from commit 7397489399)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Erratum SKL075: Display Flicker May Occur When Both VT-d And FBC Are Enabled
"Display flickering may occur when both FBC (Frame Buffer Compression)
and VT - d (Intel® Virtualization Technology for Directed I/O) are enabled
and in use by the display controller."
Ville found the w/a name in the database:
WaFbcTurnOffFbcWhenHyperVisorIsUsed:skl,bxt and also dug out that it
affects Broxton.
v2: Log when the quirk is applied.
v3: Ensure i915.enable_fbc is false when !HAS_FBC()
v4: Fix function name after rebase
v5: Add Broxton to the workaround
Note for backporting to stable, we need to add
#define mkwrite_device_info(ptr) \
((struct intel_device_info *)INTEL_INFO(ptr))
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Link: http://patchwork.freedesktop.org/patch/msgid/1470296633-20388-1-git-send-email-chris@chris-wilson.co.uk
(cherry picked from commit 36dbc4d769)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for your net tree,
they are:
1) Use mod_timer_pending() to avoid reactivating a dead expectation in
the h323 conntrack helper, from Liping Zhang.
2) Oneliner to fix a type in the register name defined in the nf_tables
header.
3) Don't try to look further when we find an inactive elements with no
descendants in the rbtree set implementation, otherwise we crash.
4) Handle valid zero CSeq in the SIP conntrack helper, from
Christophe Leroy.
5) Don't display a trailing slash in conntrack helper with no classes
via /proc/net/nf_conntrack_expect, from Liping Zhang.
6) Fix an expectation leak during creation from the nfqueue path, again
from Liping Zhang.
7) Validate netlink port ID in verdict message from nfqueue, otherwise
an injection can be possible. Again from Zhang.
8) Reject conntrack tuples with different transport protocol on
original and reply tuples, also from Zhang.
9) Validate offset and length in nft_exthdr, make sure they are under
sizeof(u8), from Laura Garcia Liebana.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Even when PCI is disabled, ARCH_HISI selects HISILICON_IRQ_MBIGEN
triggerring the following config warning:
warning: (ARM64 && HISILICON_IRQ_MBIGEN) selects ARM_GIC_V3_ITS which
has unmet direct dependencies (PCI && PCI_MSI)
This patch makes selection of HISILICON_IRQ_MBIGEN conditional on PCI.
Cc: Ma Jun <majun258@huawei.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Even when PCI is disabled, ARCH_ALPINE selects ALPINE_MSI triggerring
the following config warning:
warning: (ARCH_ALPINE) selects ALPINE_MSI which has unmet direct
dependencies (PCI)
This patch makes selection of ALPINE_MSI conditional on PCI.
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Clearly QEMU is very permissive in how its PL310 model may be set up,
but the real hardware turns out to be far more particular about things
actually being correct. Fix up the DT description so that the real
thing actually boots:
- The arm,data-latency and arm,tag-latency properties need 3 cells to
be valid, otherwise we end up retaining the default 8-cycle latencies
which leads pretty quickly to lockup.
- The arm,dirty-latency property is only relevant to L210/L220, so get
rid of it.
- The cache geometry override also leads to lockup and/or general
misbehaviour. Irritatingly, the manual doesn't state the actual PL310
configuration, but based on the boardfile code and poking registers
from the Boot Monitor, it would seem to be 8 sets of 16KB ways.
With that, we can successfully boot to enjoy the fun of mismatched FPUs...
Cc: stable@vger.kernel.org
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
c90bb7b enabled the high speed UARTs of the Jetson TK1. Due to a merge
quirk, wrong addresses were introduced. Fix it and use the correct
addresses.
Thierry let me know, that there is another patch (b5896f67ab in
linux-next) in preparation which removes all the '0,' prefixes of unit
addresses on Tegra124 and is planned to go upstream in 4.8, so
this patch will get reverted then.
But for the moment, this patch is necessary to fix current misbehaviour.
Fixes: c90bb7b9b9 ("ARM: tegra: Add high speed UARTs to Jetson TK1 device tree")
Signed-off-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Cc: stable@vger.kernel.org # v4.7
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This syscon needs to be looked up by clocks, flash protection
and other consumers.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This syscon needs to be looked up by flash protection, CLCD
display output settings and other consumers.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
For unknown reasons, we have to enable three symbols for a platform
to use a reset controller driver, otherwise we get a Kconfig
warning:
warning: (MACH_OX810SE) selects RESET_OXNAS which has unmet direct dependencies (RESET_CONTROLLER)
This selects the other two symbols for oxnas.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
The machine specific header files are exported for traditional
platforms, but not for the ones that use ARCH_MULTIPLATFORM, as
they could conflict with one another.
In case of ARM_SINGLE_ARMV7M, we end up also exporting them,
but that appears to be a mistake, and we should treat it the
same way as ARCH_MULTIPLATFORM here.
'make W=1' warns about this because it passes -Wmissing-includes
to gcc and the directories are not actually present.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Three platforms used to have header files in include/mach that
are now all gone, but the removed directories are still being
included, which leads to -Wmissing-include-dirs warnings.
This removes the extra -I flags.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull btrfs fixes from Chris Mason:
"Some fixes for btrfs send/recv and fsync from Filipe and Robbie Ko.
Bonus points to Filipe for already having xfstests in place for many
of these"
* 'for-linus-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: remove unused function btrfs_add_delayed_qgroup_reserve()
Btrfs: improve performance on fsync against new inode after rename/unlink
Btrfs: be more precise on errors when getting an inode from disk
Btrfs: send, don't bug on inconsistent snapshots
Btrfs: send, avoid incorrect leaf accesses when sending utimes operations
Btrfs: send, fix invalid leaf accesses due to incorrect utimes operations
Btrfs: send, fix warning due to late freeing of orphan_dir_info structures
Btrfs: incremental send, fix premature rmdir operations
Btrfs: incremental send, fix invalid paths for rename operations
Btrfs: send, add missing error check for calls to path_loop()
Btrfs: send, fix failure to move directories with the same name around
Btrfs: add missing check for writeback errors on fsync
Pull metag architecture fix from James Hogan:
"A single fix for a boot crash since a commit in the merge window.
Metag was unusual in calling show_mem() early, before setup_per_cpu_pageset(),
which is no longer safe. It doesn't add much value to the log, so the
fix just drops the call"
* tag 'metag-for-v4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/metag:
metag: Drop show_mem() from mem_init()
If get_maintainer is not given any filename arguments on the command line,
the standard input is read for a patch.
But checking if a VCS has a file named &STDIN is not a good idea and fails.
Verify the nominal input file is not &STDIN before checking the VCS.
Fixes: 4cad35a7ca ("get_maintainer.pl: reduce need for command-line option -f")
Reported-by: Christopher Covington <cov@codeaurora.org>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For resources shared by all cores such as SLC and IOC, only the master
core needs to do any setups / enabling / disabling etc.
Cc: <stable@vger.kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
trace_hardirqs_on_caller() in lockdep.c expects to be called before, not
after interrupts are actually enabled.
The following comment in kernel/locking/lockdep.c substantiates this
claim:
"
/*
* We're enabling irqs and according to our state above irqs weren't
* already enabled, yet we find the hardware thinks they are in fact
* enabled.. someone messed up their IRQ state tracing.
*/
"
An example can be found in include/linux/irqflags.h:
do { trace_hardirqs_on(); raw_local_irq_enable(); } while (0)
Without this change, we hit the following DEBUG_LOCKS_WARN_ON.
[ 7.760000] ------------[ cut here ]------------
[ 7.760000] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2711 resume_user_mode_begin+0x48/0xf0
[ 7.770000] DEBUG_LOCKS_WARN_ON(!irqs_disabled())
[ 7.780000] Modules linked in:
[ 7.780000] CPU: 0 PID: 1 Comm: init Not tainted 4.7.0-00003-gc668bb9-dirty #366
[ 7.790000]
[ 7.790000] Stack Trace:
[ 7.790000] arc_unwind_core.constprop.1+0xa4/0x118
[ 7.800000] warn_slowpath_fmt+0x72/0x158
[ 7.800000] resume_user_mode_begin+0x48/0xf0
[ 7.810000] ---[ end trace 6f6a7a8fae20d2f0 ]---
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
The Memory Protection Keys "rights register" (PKRU) is
XSAVE-managed, and is saved/restored along with the FPU state.
When kernel code accesses FPU regsisters, it does a delicate
dance with preempt. Otherwise, the context switching code can
get confused as to whether the most up-to-date state is in the
registers themselves or in the XSAVE buffer.
But, PKRU is not a normal FPU register. Using it does not
generate the normal device-not-available (#NM) exceptions which
means we can not manage it lazily, and the kernel completley
disallows using lazy mode when it is enabled.
The dance with preempt *only* occurs when managing the FPU
lazily. Since we never manage PKRU lazily, we do not have to do
the dance with preempt; we can access it directly. Doing it
this way saves a ton of complicated code (and is faster too).
Further, the XSAVES reenabling failed to patch a bit of code
in fpu__xfeature_set_state() the checked for compacted buffers.
That check caused fpu__xfeature_set_state() to silently refuse to
work when the kernel is using compacted XSAVE buffers. This
broke execute-only and future pkey_mprotect() support when using
compact XSAVE buffers.
But, removing fpu__xfeature_set_state() gets rid of this issue,
in addition to the nice cleanup and speedup.
This fixes the same thing as a fix that Sai posted:
https://lkml.org/lkml/2016/7/25/637
The fix that he posted is a much more obviously correct, but I
think we should just do this instead.
Reported-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Hansen <dave@sr71.net>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu-Cheng Yu <yu-cheng.yu@intel.com>
Link: http://lkml.kernel.org/r/20160727232040.7D060DAD@viggo.jf.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Building an X86_64 kernel with W=1 throws a total of 9,948 lines of warnings of
this form for both 32-bit and 64-bit syscall tables. Given that the entire rest
of the build for my config only generates 8,375 lines of output, this is a big
reduction in the warnings generated.
The warnings follow this pattern:
./arch/x86/include/generated/asm/syscalls_32.h:885:21: warning: initialized field overwritten [-Woverride-init]
__SYSCALL_I386(379, compat_sys_pwritev2, )
^
arch/x86/entry/syscall_32.c:13:46: note: in definition of macro '__SYSCALL_I386'
#define __SYSCALL_I386(nr, sym, qual) [nr] = sym,
^~~
./arch/x86/include/generated/asm/syscalls_32.h:885:21: note: (near initialization for 'ia32_sys_call_table[379]')
__SYSCALL_I386(379, compat_sys_pwritev2, )
^
arch/x86/entry/syscall_32.c:13:46: note: in definition of macro '__SYSCALL_I386'
#define __SYSCALL_I386(nr, sym, qual) [nr] = sym,
Since we intentionally build the syscall tables this way, ignore that one
warning in the two files.
Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/7464.1470021890@turing-police.cc.vt.edu
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On x86 builds the absense of <linux/io.h> makes static analyzer and compiler
unhappy which fails to build the driver.
CHECK drivers/pinctrl/intel/pinctrl-merrifield.c
drivers/pinctrl/intel/pinctrl-merrifield.c:518:17:
error: undefined identifier 'readl'
drivers/pinctrl/intel/pinctrl-merrifield.c:570:17:
error: undefined identifier 'readl'
drivers/pinctrl/intel/pinctrl-merrifield.c:575:9:
error: undefined identifier 'writel'
drivers/pinctrl/intel/pinctrl-merrifield.c:645:17:
error: undefined identifier 'readl'
CC drivers/pinctrl/intel/pinctrl-merrifield.o
drivers/pinctrl/intel/pinctrl-merrifield.c: In function ‘mrfld_pin_dbg_show’:
drivers/pinctrl/intel/pinctrl-merrifield.c:518:10:
error: implicit declaration of function ‘readl’
[-Werror=implicit-function-declaration]
value = readl(bufcfg);
^
drivers/pinctrl/intel/pinctrl-merrifield.c: In function ‘mrfld_update_bufcfg’:
drivers/pinctrl/intel/pinctrl-merrifield.c:575:2:
error: implicit declaration of function ‘writel’
[-Werror=implicit-function-declaration]
writel(value, bufcfg);
^
cc1: some warnings being treated as errors
Add header to the top of the module.
Fixes: 4e80c8f505 ("pinctrl: intel: Add Intel Merrifield pin controller support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
In the function amd_gpio_irq_enable() and
amd_gpio_direction_input(), remove the code which is setting
the default de-bounce time to 2.75ms.
The driver code shall use the same settings as specified in
BIOS. Any default assignment impacts TouchPad behaviour when
the LevelTrig is set to EDGE FALLING.
Cc: stable@vger.kernel.org
Reviewed-by: Ken Xue <Ken.Xue@amd.com>
Signed-off-by: Nitesh Kumar Agrawal <Nitesh-kumar.Agrawal@amd.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
It's not necessary to unregister pin controller device registered
with devm_pinctrl_register() and using pinctrl_unregister() leads
to a double free.
This is detected by Coccinelle semantic patch.
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
It's not necessary to unregister pin controller device registered
with devm_pinctrl_register() and using pinctrl_unregister() leads
to a double free.
This is detected by Coccinelle semantic patch.
Fixes: e649f7ec8c ("pinctrl: meson: Use devm_pinctrl_register() for pinctrl registration")
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There's a subtle preemption race on UP kernels:
Usually current->mm (and therefore mm->pgd) stays the same during the
lifetime of a task so it does not matter if a task gets preempted during
the read and write of the CR3.
But then, there is this scenario on x86-UP:
TaskA is in do_exit() and exit_mm() sets current->mm = NULL followed by:
-> mmput()
-> exit_mmap()
-> tlb_finish_mmu()
-> tlb_flush_mmu()
-> tlb_flush_mmu_tlbonly()
-> tlb_flush()
-> flush_tlb_mm_range()
-> __flush_tlb_up()
-> __flush_tlb()
-> __native_flush_tlb()
At this point current->mm is NULL but current->active_mm still points to
the "old" mm.
Let's preempt taskA _after_ native_read_cr3() by taskB. TaskB has its
own mm so CR3 has changed.
Now preempt back to taskA. TaskA has no ->mm set so it borrows taskB's
mm and so CR3 remains unchanged. Once taskA gets active it continues
where it was interrupted and that means it writes its old CR3 value
back. Everything is fine because userland won't need its memory
anymore.
Now the fun part:
Let's preempt taskA one more time and get back to taskB. This
time switch_mm() won't do a thing because oldmm (->active_mm)
is the same as mm (as per context_switch()). So we remain
with a bad CR3 / PGD and return to userland.
The next thing that happens is handle_mm_fault() with an address for
the execution of its code in userland. handle_mm_fault() realizes that
it has a PTE with proper rights so it returns doing nothing. But the
CPU looks at the wrong PGD and insists that something is wrong and
faults again. And again. And one more time…
This pagefault circle continues until the scheduler gets tired of it and
puts another task on the CPU. It gets little difficult if the task is a
RT task with a high priority. The system will either freeze or it gets
fixed by the software watchdog thread which usually runs at RT-max prio.
But waiting for the watchdog will increase the latency of the RT task
which is no good.
Fix this by disabling preemption across the critical code section.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1470404259-26290-1-git-send-email-bigeasy@linutronix.de
[ Prettified the changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We have some tests that assume we're using std=gnu99, which is fine on
most compilers, but some old compilers use a different default.
So make it explicit that we want to use std=gnu99.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
For SKL and later Intel chips, we control the power well per codec
basis via link_power callback since the commit [03b135cebc: ALSA:
hda - remove dependency on i915 power well for SKL].
However, there are a few exceptional cases where the gfx registers are
accessed from the audio driver: namely the wakeup override bit
toggling at (both system and runtime) resume. This seems causing a
kernel warning when accessed during the power well down (and likely
resulting in the bogus register accesses).
This patch puts the proper power up / down sequence around the resume
code so that the wakeup bit is fiddled properly while the power is
up. (The other callback, sync_audio_rate, is used only in the PCM
callback, so it's guaranteed in the power-on.)
Also, by this proper power up/down, the instantaneous flip of wakeup
bit in the resume callback that was introduced by the commit
[033ea349a7: ALSA: hda - Fix Skylake codec timeout] becomes
superfluous, as snd_hdac_display_power() already does it. So we can
clean it up together.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96214
Fixes: 03b135cebc ('ALSA: hda - remove dependency on i915 power well for SKL')
Cc: <stable@vger.kernel.org> # v4.2+
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When using if_changed, we need to add FORCE as a dependency (see
Documentation/kbuild/makefiles.txt) otherwise we don't get command line
change checking amongst other things. This has resulted in vdsos not
being rebuilt when switching between big and little endian.
The vdso64/32ld commands have to be changed around to avoid pulling
FORCE into the linker command line (code copied from x86).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
When we introduced the little endian support, we added the endian flags
to CC directly using override. I don't know the history of why we did
that, I suspect no one does.
Although this mostly works, it has one bug, which is that CROSS32CC
doesn't get -mbig-endian. That means when the compiler is little endian
by default and the user is building big endian, vdso32 is incorrectly
compiled as little endian and the kernel fails to build.
Instead we can add the endian flags to cflags-y/aflags-y, and then
append those to KBUILD_CFLAGS/KBUILD_AFLAGS.
This has the advantage of being 1) less ugly, 2) the documented way of
adding flags in the arch Makefile and 3) it fixes building vdso32 with a
LE toolchain.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The following warning can be triggered by hot-unplugging the CPU
on which an active SCHED_DEADLINE task is running on:
WARNING: CPU: 0 PID: 0 at kernel/locking/lockdep.c:3531 lock_release+0x690/0x6a0
releasing a pinned lock
Call Trace:
dump_stack+0x99/0xd0
__warn+0xd1/0xf0
? dl_task_timer+0x1a1/0x2b0
warn_slowpath_fmt+0x4f/0x60
? sched_clock+0x13/0x20
lock_release+0x690/0x6a0
? enqueue_pushable_dl_task+0x9b/0xa0
? enqueue_task_dl+0x1ca/0x480
_raw_spin_unlock+0x1f/0x40
dl_task_timer+0x1a1/0x2b0
? push_dl_task.part.31+0x190/0x190
WARNING: CPU: 0 PID: 0 at kernel/locking/lockdep.c:3649 lock_unpin_lock+0x181/0x1a0
unpinning an unpinned lock
Call Trace:
dump_stack+0x99/0xd0
__warn+0xd1/0xf0
warn_slowpath_fmt+0x4f/0x60
lock_unpin_lock+0x181/0x1a0
dl_task_timer+0x127/0x2b0
? push_dl_task.part.31+0x190/0x190
As per the comment before this code, its safe to drop the RQ lock
here, and since we (potentially) change rq, unpin and repin to avoid
the splat.
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
[ Rewrote changelog. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luca Abeni <luca.abeni@unitn.it>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1470274940-17976-1-git-send-email-wanpeng.li@hotmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit:
6e998916df ("sched/cputime: Fix clock_nanosleep()/clock_gettime() inconsistency")
fixed a problem whereby clock_nanosleep() followed by clock_gettime() could
allow a task to wake early. It addressed the problem by calling the scheduling
classes update_curr() when the cputimer starts.
Said change induced a considerable performance regression on the syscalls
times() and clock_gettimes(CLOCK_PROCESS_CPUTIME_ID). There are some
debuggers and applications that monitor their own performance that
accidentally depend on the performance of these specific calls.
This patch mitigates the performace loss by prefetching data in the CPU
cache, as stalls due to cache misses appear to be where most time is spent
in our benchmarks.
Here are the performance gain of this patch over v4.7-rc7 on a Sandy Bridge
box with 32 logical cores and 2 NUMA nodes. The test is repeated with a
variable number of threads, from 2 to 4*num_cpus; the results are in
seconds and correspond to the average of 10 runs; the percentage gain is
computed with (before-after)/before so a positive value is an improvement
(it's faster). The improvement varies between a few percents for 5-20
threads and more than 10% for 2 or >20 threads.
pound_clock_gettime:
threads 4.7-rc7 patched 4.7-rc7
[num] [secs] [secs (percent)]
2 3.48 3.06 ( 11.83%)
5 3.33 3.25 ( 2.40%)
8 3.37 3.26 ( 3.30%)
12 3.32 3.37 ( -1.60%)
21 4.01 3.90 ( 2.74%)
30 3.63 3.36 ( 7.41%)
48 3.71 3.11 ( 16.27%)
79 3.75 3.16 ( 15.74%)
110 3.81 3.25 ( 14.80%)
128 3.88 3.31 ( 14.76%)
pound_times:
threads 4.7-rc7 patched 4.7-rc7
[num] [secs] [secs (percent)]
2 3.65 3.25 ( 11.03%)
5 3.45 3.17 ( 7.92%)
8 3.52 3.22 ( 8.69%)
12 3.29 3.36 ( -2.04%)
21 4.07 3.92 ( 3.78%)
30 3.87 3.40 ( 12.17%)
48 3.79 3.16 ( 16.61%)
79 3.88 3.28 ( 15.42%)
110 3.90 3.38 ( 13.35%)
128 4.00 3.38 ( 15.45%)
pound_clock_gettime and pound_clock_gettime are two benchmarks included in
the MMTests framework. They launch a given number of threads which
repeatedly call times() or clock_gettimes(). The results above can be
reproduced with cloning MMTests from github.com and running the "poundtime"
workload:
$ git clone https://github.com/gormanm/mmtests.git
$ cd mmtests
$ cp configs/config-global-dhp__workload_poundtime config
$ ./run-mmtests.sh --run-monitor $(uname -r)
The above will run "poundtime" measuring the kernel currently running on
the machine; Once a new kernel is installed and the machine rebooted,
running again
$ cd mmtests
$ ./run-mmtests.sh --run-monitor $(uname -r)
will produce results to compare with. A comparison table will be output
with:
$ cd mmtests/work/log
$ ../../compare-kernels.sh
the table will contain a lot of entries; grepping for "Amean" (as in
"arithmetic mean") will give the tables presented above. The source code
for the two benchmarks is reported at the end of this changelog for
clairity.
The cache misses addressed by this patch were found using a combination of
`perf top`, `perf record` and `perf annotate`. The incriminated lines were
found to be
struct sched_entity *curr = cfs_rq->curr;
and
delta_exec = now - curr->exec_start;
in the function update_curr() from kernel/sched/fair.c. This patch
prefetches the data from memory just before update_curr is called in the
interested execution path.
A comparison of the total number of cycles before and after the patch
follows; the data is obtained using `perf stat -r 10 -ddd <program>`
running over the same sequence of number of threads used above (a positive
gain is an improvement):
threads cycles before cycles after gain
2 19,699,563,964 +-1.19% 17,358,917,517 +-1.85% 11.88%
5 47,401,089,566 +-2.96% 45,103,730,829 +-0.97% 4.85%
8 80,923,501,004 +-3.01% 71,419,385,977 +-0.77% 11.74%
12 112,326,485,473 +-0.47% 110,371,524,403 +-0.47% 1.74%
21 193,455,574,299 +-0.72% 180,120,667,904 +-0.36% 6.89%
30 315,073,519,013 +-1.64% 271,222,225,950 +-1.29% 13.92%
48 321,969,515,332 +-1.48% 273,353,977,321 +-1.16% 15.10%
79 337,866,003,422 +-0.97% 289,462,481,538 +-1.05% 14.33%
110 338,712,691,920 +-0.78% 290,574,233,170 +-0.77% 14.21%
128 348,384,794,006 +-0.50% 292,691,648,206 +-0.66% 15.99%
A comparison of cache miss vs total cache loads ratios, before and after
the patch (again from the `perf stat -r 10 -ddd <program>` tables):
threads L1 misses/total*100 L1 misses/total*100 gain
before after
2 7.43 +-4.90% 7.36 +-4.70% 0.94%
5 13.09 +-4.74% 13.52 +-3.73% -3.28%
8 13.79 +-5.61% 12.90 +-3.27% 6.45%
12 11.57 +-2.44% 8.71 +-1.40% 24.72%
21 12.39 +-3.92% 9.97 +-1.84% 19.53%
30 13.91 +-2.53% 11.73 +-2.28% 15.67%
48 13.71 +-1.59% 12.32 +-1.97% 10.14%
79 14.44 +-0.66% 13.40 +-1.06% 7.20%
110 15.86 +-0.50% 14.46 +-0.59% 8.83%
128 16.51 +-0.32% 15.06 +-0.78% 8.78%
As a final note, the following shows the evolution of performance figures
in the "poundtime" benchmark and pinpoints commit 6e998916df
("sched/cputime: Fix clock_nanosleep()/clock_gettime() inconsistency") as a
major source of degradation, mostly unaddressed to this day (figures
expressed in seconds).
pound_clock_gettime:
threads parent of 6e998916df 4.7-rc7
6e998916df itself
2 2.23 3.68 ( -64.56%) 3.48 (-55.48%)
5 2.83 3.78 ( -33.42%) 3.33 (-17.43%)
8 2.84 4.31 ( -52.12%) 3.37 (-18.76%)
12 3.09 3.61 ( -16.74%) 3.32 ( -7.17%)
21 3.14 4.63 ( -47.36%) 4.01 (-27.71%)
30 3.28 5.75 ( -75.37%) 3.63 (-10.80%)
48 3.02 6.05 (-100.56%) 3.71 (-22.99%)
79 2.88 6.30 (-118.90%) 3.75 (-30.26%)
110 2.95 6.46 (-119.00%) 3.81 (-29.24%)
128 3.05 6.42 (-110.08%) 3.88 (-27.04%)
pound_times:
threads parent of 6e998916df 4.7-rc7
6e998916df itself
2 2.27 3.73 ( -64.71%) 3.65 (-61.14%)
5 2.78 3.77 ( -35.56%) 3.45 (-23.98%)
8 2.79 4.41 ( -57.71%) 3.52 (-26.05%)
12 3.02 3.56 ( -17.94%) 3.29 ( -9.08%)
21 3.10 4.61 ( -48.74%) 4.07 (-31.34%)
30 3.33 5.75 ( -72.53%) 3.87 (-16.01%)
48 2.96 6.06 (-105.04%) 3.79 (-28.10%)
79 2.88 6.24 (-116.83%) 3.88 (-34.81%)
110 2.98 6.37 (-114.08%) 3.90 (-31.12%)
128 3.10 6.35 (-104.61%) 4.00 (-28.87%)
The source code of the two benchmarks follows. To compile the two:
NR_THREADS=42
for FILE in pound_times pound_clock_gettime; do
gcc -lrt -O2 -lpthread -DNUM_THREADS=$NR_THREADS $FILE.c -o $FILE
done
==== BEGIN pound_times.c ====
struct tms start;
void *pound (void *threadid)
{
struct tms end;
int oldutime = 0;
int utime;
int i;
for (i = 0; i < 5000000 / NUM_THREADS; i++) {
times(&end);
utime = ((int)end.tms_utime - (int)start.tms_utime);
if (oldutime > utime) {
printf("utime decreased, was %d, now %d!\n", oldutime, utime);
}
oldutime = utime;
}
pthread_exit(NULL);
}
int main()
{
pthread_t th[NUM_THREADS];
long i;
times(&start);
for (i = 0; i < NUM_THREADS; i++) {
pthread_create (&th[i], NULL, pound, (void *)i);
}
pthread_exit(NULL);
return 0;
}
==== END pound_times.c ====
==== BEGIN pound_clock_gettime.c ====
void *pound (void *threadid)
{
struct timespec ts;
int rc, i;
unsigned long prev = 0, this = 0;
for (i = 0; i < 5000000 / NUM_THREADS; i++) {
rc = clock_gettime(CLOCK_PROCESS_CPUTIME_ID, &ts);
if (rc < 0)
perror("clock_gettime");
this = (ts.tv_sec * 1000000000) + ts.tv_nsec;
if (0 && this < prev)
printf("%lu ns timewarp at iteration %d\n", prev - this, i);
prev = this;
}
pthread_exit(NULL);
}
int main()
{
pthread_t th[NUM_THREADS];
long rc, i;
pid_t pgid;
for (i = 0; i < NUM_THREADS; i++) {
rc = pthread_create(&th[i], NULL, pound, (void *)i);
if (rc < 0)
perror("pthread_create");
}
pthread_exit(NULL);
return 0;
}
==== END pound_clock_gettime.c ====
Suggested-by: Mike Galbraith <mgalbraith@suse.de>
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1470385316-15027-2-git-send-email-ggherdovich@suse.cz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Current code in cpudeadline.c has a bug in re-heapifying when adding a
new element at the end of the heap, because a deadline value of 0 is
temporarily set in the new elem, then cpudl_change_key() is called
with the actual elem deadline as param.
However, the function compares the new deadline to set with the one
previously in the elem, which is 0. So, if current absolute deadlines
grew so much to have negative values as s64, the comparison in
cpudl_change_key() makes the wrong decision. Instead, as from
dl_time_before(), the kernel should handle correctly abs deadlines
wrap-arounds.
This patch fixes the problem with a minimally invasive change that
forces cpudl_change_key() to heapify up in this case.
Signed-off-by: Tommaso Cucinotta <tommaso.cucinotta@sssup.it>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Luca Abeni <luca.abeni@unitn.it>
Cc: Juri Lelli <juri.lelli@arm.com>
Cc: Juri Lelli <juri.lelli@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1468921493-10054-2-git-send-email-tommaso.cucinotta@sssup.it
Signed-off-by: Ingo Molnar <mingo@kernel.org>
DWC3 has one interesting peculiarity with chained
transfers. If we setup N chained transfers and we
get a short packet before processing all N TRBs,
DWC3 will (conditionally) issue a XferComplete or
XferInProgress event and retire all TRBs from the
one which got a short packet to the last without
clearing their HWO bits.
This means SW must clear HWO bit manually, which
this patch is doing.
Cc: <stable@vger.kernel.org>
Cc: Brian E Rogers <brian.e.rogers@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
When using SG lists, we would end up setting
request->actual to:
num_mapped_sgs * (request->length - count)
Let's fix that up by incrementing request->actual
only once.
Cc: <stable@vger.kernel.org>
Reported-by: Brian E Rogers <brian.e.rogers@intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Fix the direct assignment of offset and length attributes included in
nft_exthdr structure from u32 data to u8.
Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
There's a perf stat bug easy to observer on a machine with only one cgroup:
$ perf stat -e cycles -I 1000 -C 0 -G /
# time counts unit events
1.000161699 <not counted> cycles /
2.000355591 <not counted> cycles /
3.000565154 <not counted> cycles /
4.000951350 <not counted> cycles /
We'd expect some output there.
The underlying problem is that there is an optimization in
perf_cgroup_sched_{in,out}() that skips the switch of cgroup events
if the old and new cgroups in a task switch are the same.
This optimization interacts with the current code in two ways
that cause a CPU context's cgroup (cpuctx->cgrp) to be NULL even if a
cgroup event matches the current task. These are:
1. On creation of the first cgroup event in a CPU: In current code,
cpuctx->cpu is only set in perf_cgroup_sched_in, but due to the
aforesaid optimization, perf_cgroup_sched_in will run until the next
cgroup switches in that CPU. This may happen late or never happen,
depending on system's number of cgroups, CPU load, etc.
2. On deletion of the last cgroup event in a cpuctx: In list_del_event,
cpuctx->cgrp is set NULL. Any new cgroup event will not be sched in
because cpuctx->cgrp == NULL until a cgroup switch occurs and
perf_cgroup_sched_in is executed (updating cpuctx->cgrp).
This patch fixes both problems by setting cpuctx->cgrp in list_add_event,
mirroring what list_del_event does when removing a cgroup event from CPU
context, as introduced in:
commit 68cacd2916 ("perf_events: Fix stale ->cgrp pointer in update_cgrp_time_from_cpuctx()")
With this patch, cpuctx->cgrp is always set/clear when installing/removing
the first/last cgroup event in/from the CPU context. With cpuctx->cgrp
correctly set, event_filter_match works as intended when events are
sched in/out.
After the fix, the output is as expected:
$ perf stat -e cycles -I 1000 -a -G /
# time counts unit events
1.004699159 627342882 cycles /
2.007397156 615272690 cycles /
3.010019057 616726074 cycles /
Signed-off-by: David Carrillo-Cisneros <davidcc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1470124092-113192-1-git-send-email-davidcc@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Vegard Nossum reported that perf fuzzing generates a NULL
pointer dereference crash:
> Digging a bit deeper into this, it seems the event itself is getting
> created by perf_event_open() and it gets added to the pmu_event_list
> through:
>
> perf_event_open()
> - perf_event_alloc()
> - account_event()
> - account_pmu_sb_event()
> - attach_sb_event()
>
> so at this point the event is being attached but its ->ctx is still
> NULL. It seems like ->ctx is set just a bit later in
> perf_event_open(), though.
>
> But before that, __schedule() comes along and creates a stack trace
> similar to the one above:
>
> __schedule()
> - __perf_event_task_sched_out()
> - perf_iterate_sb()
> - perf_iterate_sb_cpu()
> - event_filter_match()
> - perf_cgroup_match()
> - __get_cpu_context()
> - (dereference ctx which is NULL)
>
> So I guess the question is... should the event be attached (= put on
> the list) before ->ctx gets set? Or should the cgroup code check for a
> NULL ->ctx?
The latter seems like the simplest solution. Moving the list-add later
creates a bit of a mess.
Reported-by: Vegard Nossum <vegard.nossum@gmail.com>
Tested-by: Vegard Nossum <vegard.nossum@gmail.com>
Tested-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: f2fb6bef92 ("perf/core: Optimize side-band event delivery")
Link: http://lkml.kernel.org/r/20160804123724.GN6862@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch eliminates a source of imprecise APIC timer interrupts,
which imprecision may result in double interrupts or even late
interrupts.
The TSC deadline clockevent devices' configuration and registration
happens before the TSC frequency calibration is refined in
tsc_refine_calibration_work().
This results in the TSC clocksource and the TSC deadline clockevent
devices being configured with slightly different frequencies: the former
gets the refined one and the latter are configured with the inaccurate
frequency detected earlier by means of the "Fast TSC calibration using PIT".
Within the APIC code, introduce the notifier function
lapic_update_tsc_freq() which reconfigures all per-CPU TSC deadline
clockevent devices with the current tsc_khz.
Call it from the TSC code after TSC calibration refinement has happened.
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Christopher S. Hall <christopher.s.hall@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: http://lkml.kernel.org/r/20160714152255.18295-3-nicstange@gmail.com
[ Pushed #ifdef CONFIG_X86_LOCAL_APIC into header, improved changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
I noticed the following bug/misbehavior on certain Intel systems: with a
single task running on a NOHZ CPU on an Intel Haswell, I recognized
that I did not only get the one expected local_timer APIC interrupt, but
two per second at minimum. (!)
Further tracing showed that the first one precedes the programmed deadline
by up to ~50us and hence, it did nothing except for reprogramming the TSC
deadline clockevent device to trigger shortly thereafter again.
The reason for this is imprecise calibration, the timeout we program into
the APIC results in 'too short' timer interrupts. The core (hr)timer code
notices this (because it has a precise ktime source and sees the short
interrupt) and fixes it up by programming an additional very short
interrupt period.
This is obviously suboptimal.
The reason for the imprecise calibration is twofold, and this patch
fixes the first reason:
In setup_APIC_timer(), the registered clockevent device's frequency
is calculated by first dividing tsc_khz by TSC_DIVISOR and multiplying
it with 1000 afterwards:
(tsc_khz / TSC_DIVISOR) * 1000
The multiplication with 1000 is done for converting from kHz to Hz and the
division by TSC_DIVISOR is carried out in order to make sure that the final
result fits into an u32.
However, with the order given in this calculation, the roundoff error
introduced by the division gets magnified by a factor of 1000 by the
following multiplication.
To fix it, reversing the order of the division and the multiplication a la:
(tsc_khz * 1000) / TSC_DIVISOR
... reduces the roundoff error already.
Furthermore, if TSC_DIVISOR divides 1000, associativity holds:
(tsc_khz * 1000) / TSC_DIVISOR = tsc_khz * (1000 / TSC_DIVISOR)
and thus, the roundoff error even vanishes and the whole operation can be
carried out within 32 bits.
The powers of two that divide 1000 are 2, 4 and 8. A value of 8 for
TSC_DIVISOR still allows for TSC frequencies up to
2^32 / 10^9ns * 8 = 34.4GHz which is way larger than anything to expect
in the next years.
Thus we also replace the current TSC_DIVISOR value of 32 by 8. Reverse
the order of the divison and the multiplication in the calculation of
the registered clockevent device's frequency.
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Christopher S. Hall <christopher.s.hall@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Link: http://lkml.kernel.org/r/20160714152255.18295-2-nicstange@gmail.com
[ Improved changelog. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Where a device driver has set a 64-bit DMA mask to indicate the absence
of addressing limitations, we still need to ensure that we don't
allocate IOVAs beyond the actual input size of the IOMMU. The reported
aperture is the most reliable way we have of inferring that input
address size, so use that to enforce a hard upper limit where available.
Fixes: 0db2e5d18f ("iommu: Implement common IOMMU ops for DMA mapping")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Exynos5410 supports eMMC version 4.41 so HS200 is the top mode which
should be configured. This is reflected in usage of
"samsung,exynos5250-dw-mshc" compatible. However Odroid XU DTS
contained also property "mmc-hs400-1_8v" which is parsed by MMC core
therefore resulting in mixed configuration. MMC core set HS400 but
dwmmc_exynos driver did not configure the data strobe for HS400 DDR
mode.
Removal of HS400 properties fixes semi-random mmc errors during boot:
mmc_host mmc0: Bus speed (slot 0) = 400000000Hz (slot req 200000000Hz, actual 200000000HZ div = 1)
mmc0: mmc_select_hs400 failed, error -84
mmc0: error -84 whilst initialising MMC card
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
We cannot do those initializations from apply_feature_fixups() as
this function runs in a very restricted environment on 32-bit where
the kernel isn't running at its linked address and the PTRRELOC()
macro must be used for any global accesss.
Instead, split them into a separtate steup_feature_keys() function
which is called in a more suitable spot on ppc32.
Fixes: 309b315b6e ("powerpc: Call jump_label_init() in apply_feature_fixups()")
Reported-and-tested-by: Christian Kujau <lists@nerdbynature.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Right now the following sequence of events can happen:
1. Thread X calls vgic_put_irq
2. Thread Y calls vgic_add_lpi
3. Thread Y gets lpi_list_lock
4. Thread X drops the ref count to 0 and blocks on lpi_list_lock
5. Thread Y finds the irq via the lpi_list_lock, raises the ref
count to 1, and release the lpi_list_lock.
6. Thread X proceeds and frees the irq.
Avoid this by holding the spinlock around the kref_put.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
During low memory conditions, we could be dereferencing a NULL pointer
when vgic_add_lpi fails to allocate memory.
Consider for example this call sequence:
vgic_its_cmd_handle_mapi
itte->irq = vgic_add_lpi(kvm, lpi_nr);
update_lpi_config(kvm, itte->irq, NULL);
ret = kvm_read_guest(kvm, propbase + irq->intid
^^^^
kaboom?
Instead, return an error pointer from vgic_add_lpi and check the return
value from its single caller.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
This makes it easier to debug crashes that happen very early before
the kernel takes over Open Firmware by allowing us to relate the OF
reported crashing addresses to offsets within the kernel.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Both set_memory_ro() and set_memory_rw() will modify the page
attributes of at least one page, even if the numpages parameter is
zero.
The author expected that calling these functions with numpages == zero
would never happen. However with the new 444d13ff10 ("modules: add
ro_after_init support") feature this happens frequently.
Therefore do the right thing and make these two functions return
gracefully if nothing should be done.
Fixes crashes on module load like this one:
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 000003ff80008000 TEID: 000003ff80008407
Fault in home space mode while using kernel ASCE.
AS:0000000000d18007 R3:00000001e6aa4007 S:00000001e6a10800 P:00000001e34ee21d
Oops: 0004 ilc:3 [#1] SMP
Modules linked in: x_tables
CPU: 10 PID: 1 Comm: systemd Not tainted 4.7.0-11895-g3fa9045 #4
Hardware name: IBM 2964 N96 703 (LPAR)
task: 00000001e9118000 task.stack: 00000001e9120000
Krnl PSW : 0704e00180000000 00000000005677f8 (rb_erase+0xf0/0x4d0)
R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:2 PM:0 RI:0 EA:3
Krnl GPRS: 000003ff80008b20 000003ff80008b20 000003ff80008b70 0000000000b9d608
000003ff80008b20 0000000000000000 00000001e9123e88 000003ff80008950
00000001e485ab40 000003ff00000000 000003ff80008b00 00000001e4858480
0000000100000000 000003ff80008b68 00000000001d5998 00000001e9123c28
Krnl Code: 00000000005677e8: ec1801c3007c cgij %r1,0,8,567b6e
00000000005677ee: e32010100020 cg %r2,16(%r1)
#00000000005677f4: a78401c2 brc 8,567b78
>00000000005677f8: e35010080024 stg %r5,8(%r1)
00000000005677fe: ec5801af007c cgij %r5,0,8,567b5c
0000000000567804: e30050000024 stg %r0,0(%r5)
000000000056780a: ebacf0680004 lmg %r10,%r12,104(%r15)
0000000000567810: 07fe bcr 15,%r14
Call Trace:
([<000003ff80008900>] __this_module+0x0/0xffffffffffffd700 [x_tables])
([<0000000000264fd4>] do_init_module+0x12c/0x220)
([<00000000001da14a>] load_module+0x24e2/0x2b10)
([<00000000001da976>] SyS_finit_module+0xbe/0xd8)
([<0000000000803b26>] system_call+0xd6/0x264)
Last Breaking-Event-Address:
[<000000000056771a>] rb_erase+0x12/0x4d0
Kernel panic - not syncing: Fatal exception: panic_on_oops
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reported-and-tested-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Fixes: e8a97e42dc ("s390/pageattr: allow kernel page table splitting")
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
When a device is in a status where CIO has killed all I/O by itself the
interrupt for a clear request may not contain an irb to determine the
clear function. Instead it contains an error pointer -EIO.
This was ignored by the DASD int_handler leading to a hanging device
waiting for a clear interrupt.
Handle -EIO error pointer correctly for requests that are clear pending and
treat the clear as successful.
Signed-off-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Commit 8d460f6156 ("powerpc/process: Add the function
flush_tmregs_to_thread") added flush_tmregs_to_thread() and included
the assumption that it would only be called for a task which is not
current.
Although this is correct for ptrace, when generating a core dump, some
of the routines which call flush_tmregs_to_thread() are called. This
leads to a WARNing such as:
Not expecting ptrace on self: TM regs may be incorrect
------------[ cut here ]------------
WARNING: CPU: 123 PID: 7727 at arch/powerpc/kernel/process.c:1088 flush_tmregs_to_thread+0x78/0x80
CPU: 123 PID: 7727 Comm: libvirtd Not tainted 4.8.0-rc1-gcc6x-g61e8a0d #1
task: c000000fe631b600 task.stack: c000000fe63b0000
NIP: c00000000001a1a8 LR: c00000000001a1a4 CTR: c000000000717780
REGS: c000000fe63b3420 TRAP: 0700 Not tainted (4.8.0-rc1-gcc6x-g61e8a0d)
MSR: 900000010282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 28004222 XER: 20000000
...
NIP [c00000000001a1a8] flush_tmregs_to_thread+0x78/0x80
LR [c00000000001a1a4] flush_tmregs_to_thread+0x74/0x80
Call Trace:
flush_tmregs_to_thread+0x74/0x80 (unreliable)
vsr_get+0x64/0x1a0
elf_core_dump+0x604/0x1430
do_coredump+0x5fc/0x1200
get_signal+0x398/0x740
do_signal+0x54/0x2b0
do_notify_resume+0x98/0xb0
ret_from_except_lite+0x70/0x74
So fix flush_tmregs_to_thread() to detect the case where it is called on
current, and a transaction is active, and in that case flush the TM regs
to the thread_struct.
This patch also moves flush_tmregs_to_thread() into ptrace.c as it is
only called from that file.
Fixes: 8d460f6156 ("powerpc/process: Add the function flush_tmregs_to_thread")
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
[mpe: Flesh out change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit 7aef413656 ("powerpc32: rewrite csum_partial_copy_generic()
based on copy_tofrom_user()") introduced a bug when destination
address is odd and initial csum is not null
In that (rare) case the initial csum value has to be rotated one byte
as well as the resulting value is
This patch also fixes related comments
Fixes: 7aef413656 ("powerpc32: rewrite csum_partial_copy_generic() based on copy_tofrom_user()")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Adding fdb entries pointing to the bridge device uses fdb_insert(),
which lacks various checks and does not respect added_by_user flag.
As a result, some inconsistent behavior can happen:
* Adding temporary entries succeeds but results in permanent entries.
* Same goes for "dynamic" and "use".
* Changing mac address of the bridge device causes deletion of
user-added entries.
* Replacing existing entries looks successful from userspace but actually
not, regardless of NLM_F_EXCL flag.
Use the same logic as other entries and fix them.
Fixes: 3741873b4f ("bridge: allow adding of fdb entries pointing to the bridge device")
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Switch the setting of psl_fir_cntl from debug to production
environment recommended value. It mostly affects the PSL behavior when
an error is raised in psl_fir1/2.
Tested with cxlflash.
Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Reviewed-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
A new task inherits cpus_allowed and mems_allowed masks from its parent,
but if someone changes cpuset's config by writing to cpuset.cpus/cpuset.mems
before this new task is inserted into the cgroup's task list, the new task
won't be updated accordingly.
Signed-off-by: Zefan Li <lizefan@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@vger.kernel.org
I've found funny live-lock between raid10 barriers during resync and
memory controller hard limits. Inside mpage_readpages() task holds on to
its plug bio which blocks the barrier in raid10. Its memory cgroup have
no free memory thus the task goes into reclaimer but all reclaimable
pages are dirty and cannot be written because raid10 is rebuilding and
stuck on the barrier.
Common flush of such IO in schedule() never happens, because the caller
doesn't go to sleep.
Lock is 'live' because changing memory limit or killing tasks which
holds that stuck bio unblock whole progress.
That was what happened in 3.18.x but I see no difference in upstream
logic. Theoretically this might happen even without memory cgroup.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Jens Axboe <axboe@fb.com>
Disable all interrupts when suspend, they will be enabled
when resume. Otherwise, the suspend/resume process will be
blocked occasionally.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit b5a099c67a "net: ethernet: davicom: fix devicetree irq
resource" causes an interrupt storm after the ethernet interface
is activated on S3C24XX platform (ARM non-dt), due to the interrupt
trigger type not being set properly.
It seems, after adding parsing of IRQ flags in commit 7085a7401b
"drivers: platform: parse IRQ flags from resources", there is no path
for non-dt platforms where irq_set_type callback could be invoked when
we don't pass the trigger type flags to the request_irq() call.
In case of a board where the regression is seen the interrupt trigger
type flags are passed through a platform device's resource and it is
not currently handled properly without passing the irq trigger type
flags to the request_irq() call. In case of OF an of_irq_get() call
within platform_get_irq() function seems to be ensuring required irq_chip
setup, but there is no equivalent code for non OF/ACPI platforms.
This patch mostly restores irq trigger type setting code which has been
removed in commit ("net: ethernet: davicom: fix devicetree irq resource").
Fixes: b5a099c67a ("net: ethernet: davicom: fix devicetree irq resource")
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
During boot, sometimes the kernel will test to see if an instruction
causes an undefined instruction exception. Unfortunately, the exit
path for these exceptions did not restore the address limit, which
causes the rootfs mount code to fail. Fix the missing address limit
restoration.
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The late_alloc() PTE allocation function used by create_mapping_late()
does not call pgtable_page_ctor() on PTE pages it allocates, leaving
the per-page spinlock uninitialized.
Since generic page table manipulation code may assume that translation
table pages that are not owned by init_mm are covered by fully
constructed struct pages, the following crash may occur with the new
UEFI memory attributes table code.
efi: memattr: Processing EFI Memory Attributes table:
efi: memattr: 0x0000ffa16000-0x0000ffa82fff [Runtime Code |RUN| | |XP| | | | | | | | ]
Unable to handle kernel NULL pointer dereference at virtual address 00000010
pgd = c0204000
[00000010] *pgd=00000000
Internal error: Oops: 5 [#1] SMP ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc4-00063-g3882aa7b340b #361
Hardware name: Generic DT based system
task: ed858000 ti: ed842000 task.ti: ed842000
PC is at __lock_acquire+0xa0/0x19a8
...
[<c038c830>] (__lock_acquire) from [<c038e4f8>] (lock_acquire+0x6c/0x88)
[<c038e4f8>] (lock_acquire) from [<c0c06134>] (_raw_spin_lock+0x2c/0x3c)
[<c0c06134>] (_raw_spin_lock) from [<c0410384>] (apply_to_page_range+0xe8/0x238)
[<c0410384>] (apply_to_page_range) from [<c1205f34>] (efi_set_mapping_permissions+0x54/0x5c)
[<c1205f34>] (efi_set_mapping_permissions) from [<c1247474>] (efi_memattr_apply_permissions+0x2b8/0x378)
[<c1247474>] (efi_memattr_apply_permissions) from [<c1248258>] (arm_enable_runtime_services+0x1f0/0x22c)
[<c1248258>] (arm_enable_runtime_services) from [<c0301f0c>] (do_one_initcall+0x44/0x174)
[<c0301f0c>] (do_one_initcall) from [<c1200d10>] (kernel_init_freeable+0x90/0x1e8)
[<c1200d10>] (kernel_init_freeable) from [<c0bff690>] (kernel_init+0x8/0x114)
[<c0bff690>] (kernel_init) from [<c0307ed0>] (ret_from_fork+0x14/0x24)
The crash is due to the fact that the UEFI page tables are not owned by
init_mm, but are not covered by fully constructed struct pages.
Given that the UEFI subsystem is currently the only user of
create_mapping_late(), add an unconditional call to pgtable_page_ctor() to
late_alloc().
Fixes: 9fc68b717c ("ARM/efi: Apply strict permissions for UEFI Runtime Services regions")
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
To limit the amount of mapped low memory, we determine a physical address
boundary based on the start of the vmalloc area using __pa().
Strictly speaking, the vmalloc area location is arbitrary and does not
necessarily corresponds to a valid physical address. For example, if
PAGE_OFFSET = 0x80000000
PHYS_OFFSET = 0x90000000
vmalloc_min = 0xf0000000
then __pa(vmalloc_min) overflows and returns a wrapped 0 when phys_addr_t
is a 32-bit type. Then the code that follows determines that the entire
physical memory is above that boundary and no low memory gets mapped at
all:
|[...]
|Machine model: Freescale i.MX51 NA04 Board
|Ignoring RAM at 0x90000000-0xb0000000 (!CONFIG_HIGHMEM)
|Consider using a HIGHMEM enabled kernel.
To avoid this problem let's make vmalloc_limit a 64-bit value all the
time and determine that boundary explicitly without using __pa().
Reported-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
When executing the script included below, the netns delete operation
hangs with the following message (repeated at 10 second intervals):
kernel:unregister_netdevice: waiting for lo to become free. Usage count = 1
This occurs because a reference to the lo interface in the "secure" netns
is still held by a dst entry in the xfrm bundle cache in the init netns.
Address this problem by garbage collecting the tunnel netns flow cache
when a cross-namespace vti interface receives a NETDEV_DOWN notification.
A more detailed description of the problem scenario (referencing commands
in the script below):
(1) ip link add vti_test type vti local 1.1.1.1 remote 1.1.1.2 key 1
The vti_test interface is created in the init namespace. vti_tunnel_init()
attaches a struct ip_tunnel to the vti interface's netdev_priv(dev),
setting the tunnel net to &init_net.
(2) ip link set vti_test netns secure
The vti_test interface is moved to the "secure" netns. Note that
the associated struct ip_tunnel still has tunnel->net set to &init_net.
(3) ip netns exec secure ping -c 4 -i 0.02 -I 192.168.100.1 192.168.200.1
The first packet sent using the vti device causes xfrm_lookup() to be
called as follows:
dst = xfrm_lookup(tunnel->net, skb_dst(skb), fl, NULL, 0);
Note that tunnel->net is the init namespace, while skb_dst(skb) references
the vti_test interface in the "secure" namespace. The returned dst
references an interface in the init namespace.
Also note that the first parameter to xfrm_lookup() determines which flow
cache is used to store the computed xfrm bundle, so after xfrm_lookup()
returns there will be a cached bundle in the init namespace flow cache
with a dst referencing a device in the "secure" namespace.
(4) ip netns del secure
Kernel begins to delete the "secure" namespace. At some point the
vti_test interface is deleted, at which point dst_ifdown() changes
the dst->dev in the cached xfrm bundle flow from vti_test to lo (still
in the "secure" namespace however).
Since nothing has happened to cause the init namespace's flow cache
to be garbage collected, this dst remains attached to the flow cache,
so the kernel loops waiting for the last reference to lo to go away.
<Begin script>
ip link add br1 type bridge
ip link set dev br1 up
ip addr add dev br1 1.1.1.1/8
ip netns add secure
ip link add vti_test type vti local 1.1.1.1 remote 1.1.1.2 key 1
ip link set vti_test netns secure
ip netns exec secure ip link set vti_test up
ip netns exec secure ip link s lo up
ip netns exec secure ip addr add dev lo 192.168.100.1/24
ip netns exec secure ip route add 192.168.200.0/24 dev vti_test
ip xfrm policy flush
ip xfrm state flush
ip xfrm policy add dir out tmpl src 1.1.1.1 dst 1.1.1.2 \
proto esp mode tunnel mark 1
ip xfrm policy add dir in tmpl src 1.1.1.2 dst 1.1.1.1 \
proto esp mode tunnel mark 1
ip xfrm state add src 1.1.1.1 dst 1.1.1.2 proto esp spi 1 \
mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788
ip xfrm state add src 1.1.1.2 dst 1.1.1.1 proto esp spi 1 \
mode tunnel enc des3_ede 0x112233445566778811223344556677881122334455667788
ip netns exec secure ping -c 4 -i 0.02 -I 192.168.100.1 192.168.200.1
ip netns del secure
<End script>
Reported-by: Hangbin Liu <haliu@redhat.com>
Reported-by: Jan Tluka <jtluka@redhat.com>
Signed-off-by: Lance Richardson <lrichard@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells says:
====================
rxrpc: Miscellaneous fixes
Here are a bunch of miscellaneous fixes to AF_RXRPC:
(*) Fix an uninitialised pointer.
(*) Fix error handling when we fail to connect a call.
(*) Fix a NULL pointer dereference.
(*) Fix two occasions where a packet is accessed again after being queued
for someone else to deal with.
(*) Fix a missing skb free.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
User visible fixes:
- Fix the lookup for a kernel module in 'perf probe', fixing for instance, the
erroneous return of "[raid10]" when looking for "[raid1]" (Konstantin Khlebnikov)
- Disable counters in a group before reading them in 'perf stat', to avoid skew (Mark Rutland)
- Fix adding probes to function aliases in systems using kaslr (Masami Hiramatsu)
- Trip libtraceevent trace_seq buffers, removing unnecessary memory usage that could
bring a system using tracepoint events with 'perf top' to a crawl, as the trace_seq
buffers start at a whooping 4 KB, which is very rarely used in perf's usecases,
so realloc it to the really used space as a last measure after using libtraceevent
functions to format the fields of tracepoint events (Arnaldo Carvalho de Melo)
- Fix 'perf probe' location when using DWARF on ppc64le (Ravi Bangoria)
- Allow specifying signedness casts to a 'perf probe' variable, to shorten
the number of steps to see signed values that otherwise would always appear
as hex values (Naohiro Aota)
Documentation fixes:
- Add 'bpf-output' field to 'perf script' usage message (Brendan Gregg)
Infrastructure fixes:
- Sync kernel header files: cpufeatures.h, {disabled,required}-features.h,
bpf.h and vmx.h, so that we get a clean build, without warnings about files
being different from the kernel counterparts.
A verification of the need or desirability of changes in tools/ based on what
was done in the kernel changesets was made and documented in the respective
file sync changesets (Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This reverts commit 874f9c7da9.
Geert Uytterhoeven reports:
"This change seems to have an (unintendent?) side-effect.
Before, pr_*() calls without a trailing newline characters would be
printed with a newline character appended, both on the console and in
the output of the dmesg command.
After this commit, no new line character is appended, and the output
of the next pr_*() call of the same type may be appended, like in:
- Truncating RAM at 0x0000000040000000-0x00000000c0000000 to -0x0000000070000000
- Ignoring RAM at 0x0000000200000000-0x0000000240000000 (!CONFIG_HIGHMEM)
+ Truncating RAM at 0x0000000040000000-0x00000000c0000000 to -0x0000000070000000Ignoring RAM at 0x0000000200000000-0x0000000240000000 (!CONFIG_HIGHMEM)"
Joe Perches says:
"No, that is not intentional.
The newline handling code inside vprintk_emit is a bit involved and
for now I suggest a revert until this has all the same behavior as
earlier"
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Requested-by: Joe Perches <joe@perches.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since IRQCHIP_DECLARE now flags the GPC node as already populated, the
GPC power domain driver is never probed unless we clear the flag again.
Fixes: 15cc2ed6dc ("of/irq: Mark initialised interrupt controllers as populated")
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
That way the init callback may clear the flag again, in case of drivers
split between early irq chip and a normal platform driver.
Fixes: 15cc2ed6dc ("of/irq: Mark initialised interrupt controllers as populated")
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
@mynodes is set to NULL when __unflatten_device_tree() is called
to unflatten device sub-tree in PCI hot add scenario on PowerPC
PowerNV platform. Marking @mynodes detached unconditionally causes
kernel crash as below backtrace shows:
Unable to handle kernel paging request for data at address 0x00000000
Faulting instruction address: 0xc000000000b26f64
cpu 0x0: Vector: 300 (Data Access) at [c000003fcc7cf740]
pc: c000000000b26f64: __unflatten_device_tree+0xf4/0x190
lr: c000000000b26f40: __unflatten_device_tree+0xd0/0x190
sp: c000003fcc7cf9c0
msr: 900000000280b033
dar: 0
dsisr: 40000000
current = 0xc000003fcc281680
paca = 0xc00000000ff00000 softe: 0 irq_happened: 0x01
pid = 2724, comm = sh
Linux version 4.7.0-gavin-07754-g92a6836 (gwshan@gwshan) (gcc version \
4.9.3 (Buildroot 2016.02-rc2-00093-g5ea3bce) ) #539 SMP Mon Aug 1 \
12:40:29 AEST 2016
enter ? for help
[c000003fcc7cfa50] c000000000b27060 of_fdt_unflatten_tree+0x60/0x90
[c000003fcc7cfaa0] c0000000004c6288 pnv_php_set_slot_power_state+0x118/0x440
[c000003fcc7cfb80] c0000000004c6a10 pnv_php_enable+0xc0/0x170
[c000003fcc7cfbd0] c0000000004c4d80 power_write_file+0xa0/0x190
[c000003fcc7cfc50] c0000000004be93c pci_slot_attr_store+0x3c/0x60
[c000003fcc7cfc70] c0000000002d3fd4 sysfs_kf_write+0x94/0xc0
[c000003fcc7cfcb0] c0000000002d2c30 kernfs_fop_write+0x180/0x260
[c000003fcc7cfd00] c000000000230fe0 __vfs_write+0x40/0x190
[c000003fcc7cfd90] c000000000232278 vfs_write+0xc8/0x240
[c000003fcc7cfde0] c000000000233d90 SyS_write+0x60/0x110
[c000003fcc7cfe30] c000000000009524 system_call+0x38/0x108
This avoids the kernel crash by marking @mynodes detached only when
@mynodes is dereferencing valid device node in __unflatten_device_tree().
Fixes: 1d1bde550e ("of: fdt: mark unflattened tree as detached")
Reported-by: Meng Li <shlimeng@cn.ibm.com>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The of_node_put() function tests whether its argument is NULL
and then returns immediately.
Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Rob Herring <robh@kernel.org>
Pull tracing fix from Steven Rostedt:
"Fix tick_stop tracepoint symbols for user export.
Luiz Capitulino noticed that the tick_stop tracepoint wasn't being
parsed properly by the tracing user space tools.
This was due to the TRACE_DEFINE_ENUM() being set to a define, when it
should have been set to the enum itself. The define was of the MASK
that used the BIT to shift. The BIT was the enum and by adding that,
everything gets converted nicely. The MASK is still kept just in case
it gets converted to an enum in the future"
* tag 'trace-v4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix tick_stop tracepoint symbols for user export
Pull gcc plugin improvements from Kees Cook:
"Several fixes/improvements for the gcc plugin infrastructure:
- fix a problem with gcc plugins interfering with cc-option tests.
- abort more gracefully when gcc plugin headers or compiler support
is missing.
- improve the gcc plugin rule generation to be more dynamic, pass
arguments, and build from subdirectories"
* tag 'gcc-plugin-infrastructure-v4.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
gcc-plugins: Add support for plugin subdirectories
gcc-plugins: Automate make rule generation
gcc-plugins: Add support for passing plugin arguments
gcc-plugins: abort builds cleanly when not supported
kbuild: no gcc-plugins during cc-option tests
Pull x86 platform driver update from Darren Hart:
"dell-wmi: ignore battery remove/insert event"
* tag 'platform-drivers-x86-v4.8-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
dell-wmi: Ignore WMI event 0xe00e
Pull drm fixes from Dave Airlie:
"This contains a bunch of amdgpu fixes, and some i915 regression fixes.
It also contains some fixes for an older regression with some EDID
changes and some 6bpc panels.
Then there are the lockdep, cirrus and rcar-du regression fixes from
this window"
* tag 'drm-fixes-for-4.8-rc2' of git://people.freedesktop.org/~airlied/linux:
drm/cirrus: Fix NULL pointer dereference when registering the fbdev
drm/edid: Set 8 bpc color depth for displays with "DFP 1.x compliant TMDS".
drm/i915/dp: Revert "drm/i915/dp: fall back to 18 bpp when sink capability is unknown"
drm/edid: Add 6 bpc quirk for display AEO model 0.
drm: Paper over locking inversion after registration rework
drm: rcar-du: Link HDMI encoder with bridge
drm/ttm: Wait for a BO to become idle before unbinding it from GTT
drm/i915/fbdev: Check for the framebuffer before use
drm/amdgpu: update golden setting of polaris10
drm/amdgpu: update golden setting of stoney
drm/amdgpu: update golden setting of polaris11
drm/amdgpu: update golden setting of carrizo
drm/amdgpu: update golden setting of iceland
drm/amd/amdgpu: change pptable output format from ASCII to binary
drm/amdgpu/ci: add mullins to default case for smc ucode
drm/amdgpu/gmc7: add missing mullins case
drm/i915: Never fully mask the the EI up rps interrupt on SNB/IVB
drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL
Commit b195d5e2bf ("ipr: Wait to do async scan until scsi host is
initialized") fixed async scan for ipr, but broke sync scan for ipr.
This fixes sync scan back up.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Reported-and-tested-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To distinguish non-slab pages charged to kmemcg we mark them PageKmemcg,
which sets page->_mapcount to -512. Currently, we set/clear PageKmemcg
in __alloc_pages_nodemask()/free_pages_prepare() for any page allocated
with __GFP_ACCOUNT, including those that aren't actually charged to any
cgroup, i.e. allocated from the root cgroup context. To avoid overhead
in case cgroups are not used, we only do that if memcg_kmem_enabled() is
true. The latter is set iff there are kmem-enabled memory cgroups
(online or offline). The root cgroup is not considered kmem-enabled.
As a result, if a page is allocated with __GFP_ACCOUNT for the root
cgroup when there are kmem-enabled memory cgroups and is freed after all
kmem-enabled memory cgroups were removed, e.g.
# no memory cgroups has been created yet, create one
mkdir /sys/fs/cgroup/memory/test
# run something allocating pages with __GFP_ACCOUNT, e.g.
# a program using pipe
dmesg | tail
# remove the memory cgroup
rmdir /sys/fs/cgroup/memory/test
we'll get bad page state bug complaining about page->_mapcount != -1:
BUG: Bad page state in process swapper/0 pfn:1fd945c
page:ffffea007f651700 count:0 mapcount:-511 mapping: (null) index:0x0
flags: 0x1000000000000000()
To avoid that, let's mark with PageKmemcg only those pages that are
actually charged to and hence pin a non-root memory cgroup.
Fixes: 4949148ad4 ("mm: charge/uncharge kmemcg from generic page allocator paths")
Reported-and-tested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some uio based PCI drivers, e.g., uio_cif, do not work if the assigned PCI
memory resources are not page aligned. By using the kernel option
"pci=resource_alignment=<align>@<bus>:<slot>.<func>" it is possible to
request page alignment for memory resources of devices.
However, this is cumbersome when using several devices, and the
bus/slot/func addresses may change if devices are added to or removed from
the system.
Extend the "pci=resource_alignment" option so we can specify the relevant
devices via PCI vendor, device, subvendor, and subdevice IDs. The
specification of the devices via IDs is indicated by a leading string
"pci:" as argument to "pci=resource_alignment".
The format of the specification is
pci:<vendor>:<device>[:<subvendor>:<subdevice>]
Examples:
pci=resource_alignment=4096@pci:8086:9c22:103c:198f
pci=resource_alignment=pci:8086:9c22 # defaults to PAGE_SIZE align
[bhelgaas: changelog, use actual vendor/device IDs in examples]
Signed-off-by: Mathias Koehrer <mathias.koehrer@etas.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Patch 19a469a587 ("drivers/perf: arm-pmu: Handle per-interrupt
affinity mask") added support for partitionned PPI setups, but
inadvertently broke setups using SPIs without the "interrupt-affinity"
property (which is the case for UP platforms).
This patch restore the broken functionnality by testing whether the
interrupt is percpu or not instead of relying on the using_spi flag
that really means "SPI *and* interrupt-affinity property".
Acked-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 19a469a587 ("drivers/perf: arm-pmu: Handle per-interrupt affinity mask")
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
arm_pmu_mutex is never held long and we don't want to sleep while the
lock is being held as it's executed in the context of hotplug notifiers.
So it can be converted to a simple spinlock instead.
Without this patch we get the following warning:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620
in_atomic(): 1, irqs_disabled(): 128, pid: 0, name: swapper/2
no locks held by swapper/2/0.
irq event stamp: 381314
hardirqs last enabled at (381313): _raw_spin_unlock_irqrestore+0x7c/0x88
hardirqs last disabled at (381314): cpu_die+0x28/0x48
softirqs last enabled at (381294): _local_bh_enable+0x28/0x50
softirqs last disabled at (381293): irq_enter+0x58/0x78
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.7.0 #12
Call trace:
dump_backtrace+0x0/0x220
show_stack+0x24/0x30
dump_stack+0xb4/0xf0
___might_sleep+0x1d8/0x1f0
__might_sleep+0x5c/0x98
mutex_lock_nested+0x54/0x400
arm_perf_starting_cpu+0x34/0xb0
cpuhp_invoke_callback+0x88/0x3d8
notify_cpu_starting+0x78/0x98
secondary_start_kernel+0x108/0x1a8
This patch converts the mutex to spinlock to eliminate the above
warnings. This constraints pmu->reset to be non-blocking call which is
the case with all the ARM PMU backends.
Cc: Stephen Boyd <sboyd@codeaurora.org>
Fixes: 37b502f121 ("arm/perf: Fix hotplug state machine conversion")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Once a packet has been posted to a connection in the data_ready handler, we
mustn't try reposting if we then find that the connection is dying as the
refcount has been given over to the dying connection and the packet might
no longer exist.
Losing the packet isn't a problem as the peer will retransmit.
Signed-off-by: David Howells <dhowells@redhat.com>
The call state machine processor sets up the message parameters for a UDP
message that it might need to transmit in advance on the basis that there's
a very good chance it's going to have to transmit either an ACK or an
ABORT. This requires it to look in the connection struct to retrieve some
of the parameters.
However, if the call is complete, the call connection pointer may be NULL
to dissuade the processor from transmitting a message. However, there are
some situations where the processor is still going to be called - and it's
still going to set up message parameters whether it needs them or not.
This results in a NULL pointer dereference at:
net/rxrpc/call_event.c:837
To fix this, skip the message pre-initialisation if there's no connection
attached.
Signed-off-by: David Howells <dhowells@redhat.com>
If rxrpc_new_client_call() fails to make a connection, the call record that
it allocated needs to be marked as RXRPC_CALL_RELEASED before it is passed
to rxrpc_put_call() to indicate that it no longer has any attachment to the
AF_RXRPC socket.
Without this, an assertion failure may occur at:
net/rxrpc/call_object:635
Signed-off-by: David Howells <dhowells@redhat.com>
Due to the limitations of having to wait until we see a device's DMA
restrictions before we know how we want an IOVA domain initialised,
there is a window for error if a DMA ops domain is allocated but later
freed without ever being used. In that case, init_iova_domain() was
never called, so calling put_iova_domain() from iommu_put_dma_cookie()
ends up trying to take an uninitialised lock and crashing.
Make things robust by skipping the call unless the IOVA domain actually
has been initialised, as we probably should have done from the start.
Fixes: 0db2e5d18f ("iommu: Implement common IOMMU ops for DMA mapping")
Cc: stable@vger.kernel.org
Reported-by: Nate Watterson <nwatters@codeaurora.org>
Reviewed-by: Nate Watterson <nwatters@codeaurora.org>
Tested-by: Nate Watterson <nwatters@codeaurora.org>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Tested-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
pathbase is the base inode; set it to 0 if we've got no path.
Coverity-id: 146348
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
ceph_file_layout::pool_id is now s64. rbd_add_get_pool_id() and
ceph_pg_poolid_by_name() both return an int, so it's bogus anyway.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Powerpc has Global Entry Point and Local Entry Point for functions. LEP
catches call from both the GEP and the LEP. Symbol table of ELF contains
GEP and Offset from which we can calculate LEP, but debuginfo does not
have LEP info.
Currently, perf prioritize symbol table over dwarf to probe on LEP for
ppc64le. But when user tries to probe with function parameter, we fall
back to using dwarf(i.e. GEP) and when function called via LEP, probe
will never hit.
For example:
$ objdump -d vmlinux
...
do_sys_open():
c0000000002eb4a0: e8 00 4c 3c addis r2,r12,232
c0000000002eb4a4: 60 00 42 38 addi r2,r2,96
c0000000002eb4a8: a6 02 08 7c mflr r0
c0000000002eb4ac: d0 ff 41 fb std r26,-48(r1)
$ sudo ./perf probe do_sys_open
$ sudo cat /sys/kernel/debug/tracing/kprobe_events
p:probe/do_sys_open _text+3060904
$ sudo ./perf probe 'do_sys_open filename:string'
$ sudo cat /sys/kernel/debug/tracing/kprobe_events
p:probe/do_sys_open _text+3060896 filename_string=+0(%gpr4):string
For second case, perf probed on GEP. So when function will be called via
LEP, probe won't hit.
$ sudo ./perf record -a -e probe:do_sys_open ls
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.195 MB perf.data ]
To resolve this issue, let's not prioritize symbol table, let perf
decide what it wants to use. Perf is already converting GEP to LEP when
it uses symbol table. When perf uses debuginfo, let it find LEP offset
form symbol table. This way we fall back to probe on LEP for all cases.
After patch:
$ sudo ./perf probe 'do_sys_open filename:string'
$ sudo cat /sys/kernel/debug/tracing/kprobe_events
p:probe/do_sys_open _text+3060904 filename_string=+0(%gpr4):string
$ sudo ./perf record -a -e probe:do_sys_open ls
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.197 MB perf.data (11 samples) ]
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1470723805-5081-2-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Due to:
1e61f78baf ("x86/cpufeature: Make sure DISABLED/REQUIRED macros are updated")
No changes to tools using those headers (tools/arch/x86/lib/mem{set,cpu}_64.S)
seems necessary.
Detected by the tools build header drift checker:
$ make -C tools/perf O=/tmp/build/perf
make: Entering directory '/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
GEN /tmp/build/perf/common-cmds.h
Warning: tools/arch/x86/include/asm/disabled-features.h differs from kernel
Warning: tools/arch/x86/include/asm/required-features.h differs from kernel
Warning: tools/arch/x86/include/asm/cpufeatures.h differs from kernel
CC /tmp/build/perf/util/probe-finder.o
CC /tmp/build/perf/builtin-help.o
<SNIP>
^C$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ja75m7zk8j0jkzmrv16i5ehw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The way we're using kernel headers in tools/ now, with a copy that is
made to the same path prefixed by "tools/" plus checking if that copy
got stale, i.e. if the kernel counterpart changed, helps in keeping
track with new features that may be useful for tools to exploit.
For instance, looking at all the changes to bpf.h since it was last
copied to tools/include brings this to toolers' attention:
Need to investigate this one to check how to run a program via perf, setting up
a BPF event, that will take advantage of the way perf already calls clang/LLVM,
sets up the event and runs the workload in a single command line, helping in
debugging such semi cooperative programs:
96ae522795 ("bpf: Add bpf_probe_write_user BPF helper to be called in tracers")
This one needs further investigation about using the feature it improves
in 'perf trace' to do some tcpdumpin' mixed with syscalls, tracepoints,
probe points, callgraphs, etc:
555c8a8623 ("bpf: avoid stack copy and use skb ctx for event output")
Add tracing just packets that are related to some container to that mix:
4a482f34af ("cgroup: bpf: Add bpf_skb_in_cgroup_proto")
4ed8ec521e ("cgroup: bpf: Add BPF_MAP_TYPE_CGROUP_ARRAY")
Definetely needs to have example programs accessing task_struct from a bpf proggie
started from 'perf trace':
606274c5ab ("bpf: introduce bpf_get_current_task() helper")
Core networking related, XDP:
6ce96ca348 ("bpf: add XDP_TX xdp_action for direct forwarding")
6a773a15a1 ("bpf: add XDP prog type for early driver filter")
13c5c240f7 ("bpf: add bpf_get_hash_recalc helper")
d2485c4242 ("bpf: add bpf_skb_change_type helper")
6578171a7f ("bpf: add bpf_skb_change_proto helper")
Changes detected by the tools build system:
$ make -C tools/perf O=/tmp/build/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
Warning: tools/include/uapi/linux/bpf.h differs from kernel
INSTALL GTK UI
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
<SNIP>
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Brenden Blanco <bblanco@plumgrid.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-difq4ts1xvww6eyfs9e7zlft@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
According to the KVM API documentation a successful MSI injection
should return a value > 0 on success.
Return possible errors in vgic_its_trigger_msi() and report a
successful injection back to userland, while also reporting the
case where the MSI could not be delivered due to the guest not
having the LPI mapped, for instance.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
There were changes related to the deprecation of the "pcommit"
instruction:
fd1d961dd6 ("x86/insn: remove pcommit")
dfa169bbee ("Revert "KVM: x86: add pcommit support"")
No need to update anything in the tools, as "pcommit" wasn't being
listed on the VMX_EXIT_REASONS in the tools/perf/arch/x86/util/kvm-stat.c
file.
Just grab fresh copies of these files to silence the file cache
coherency detector:
$ make -C tools/perf O=/tmp/build/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
Warning: tools/arch/x86/include/asm/cpufeatures.h differs from kernel
Warning: tools/arch/x86/include/uapi/asm/vmx.h differs from kernel
INSTALL GTK UI
<SNIP>
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Link: http://lkml.kernel.org/n/tip-07pmcc1ysydhyyxbmp1vt0l4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
GPIO control register is divided into IOPINS1 and IOPINS2.
And low 4-bit of register is controls output.
So, this patch fixes wrong mask of GPIO output.
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede has reported a difficulty in the Linux port of libusb.
When a device is removed, the poll() system call in usbfs starts
returning POLLERR as soon as udev->state is set to
USB_STATE_NOTATTACHED, but the outstanding URBs are not available for
reaping until some time later (after usbdev_remove() has been called).
This is awkward for libusb or other usbfs clients, although not an
insuperable problem.
At any rate, it's easy to change usbfs so that it returns POLLHUP as
soon as the state becomes USB_STATE_NOTATTACHED but it doesn't return
POLLERR until after the outstanding URBs have completed. That's what
this patch does; it uses the fact that ps->list is always on the
dev->filelist list until usbdev_remove() takes it off, which happens
after all the outstanding URBs have been cancelled.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usbdev_mmap allocates a buffer. The size of the buffer is determined
by a user. So with this code (no need to be root):
int fd = open("/dev/bus/usb/001/001", O_RDONLY);
mmap(NULL, 0x800000, PROT_READ, MAP_SHARED, fd, 0);
we can see a warning:
WARNING: CPU: 0 PID: 21771 at ../mm/page_alloc.c:3563 __alloc_pages_slowpath+0x1036/0x16e0()
...
Call Trace:
[<ffffffff8117a3ae>] ? warn_slowpath_null+0x2e/0x40
[<ffffffff815178b6>] ? __alloc_pages_slowpath+0x1036/0x16e0
[<ffffffff81516880>] ? warn_alloc_failed+0x250/0x250
[<ffffffff8151226b>] ? get_page_from_freelist+0x75b/0x28b0
[<ffffffff815184e3>] ? __alloc_pages_nodemask+0x583/0x6b0
[<ffffffff81517f60>] ? __alloc_pages_slowpath+0x16e0/0x16e0
[<ffffffff810565d4>] ? dma_generic_alloc_coherent+0x104/0x220
[<ffffffffa0269e56>] ? hcd_buffer_alloc+0x1d6/0x3e0 [usbcore]
[<ffffffffa0269c80>] ? hcd_buffer_destroy+0xa0/0xa0 [usbcore]
[<ffffffffa0228f05>] ? usb_alloc_coherent+0x65/0x90 [usbcore]
[<ffffffffa0275c05>] ? usbdev_mmap+0x1a5/0x770 [usbcore]
...
Allocations like this one should be marked as __GFP_NOWARN. So do so.
The size could be also clipped by something like:
if (size >= (1 << (MAX_ORDER + PAGE_SHIFT - 1)))
return -ENOMEM;
But I think the overall limit of 16M (by usbfs_increase_memory_usage)
is enough, so that we only silence the warning here.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Steinar H. Gunderson <sesse@google.com>
Cc: Markus Rechberger <mrechberger@gmail.com>
Fixes: f7d34b445a (USB: Add support for usbfs zerocopy.)
Cc: 4.6+ <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In ehci_turn_off_all_ports() all EHCI port registers are cleared to zero.
On some hardware, this can lead to an system hang,
when ehci_port_power() accesses the already cleared registers.
This patch changes the order of cleanup.
First call ehci_port_power() which respects the current bits in
port status registers
and afterwards cleanup the hard way by setting everything to zero.
Signed-off-by: Marc Ohlf <ohlf@mkt-sys.de>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Erroneous or malicious endpoint descriptors may have non-zero bits in
reserved positions, or out-of-bounds values. This patch helps prevent
these from causing problems by bounds-checking the wMaxPacketValue
entries in endpoint descriptors and capping the values at the maximum
allowed.
This issue was first discovered and tests were conducted by Jake Lamberson
<jake.lamberson1@gmail.com>, an intern working for Rosie Hall.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-by: roswest <roswest@cisco.com>
Tested-by: roswest <roswest@cisco.com>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'perf probe' tool detects a variable's type and use the detected
type to add a new probe. Then, kprobes prints its variable in
hexadecimal format if the variable is unsigned and prints in decimal if
it is signed.
We sometimes want to see unsigned variable in decimal format (i.e.
sector_t or size_t). In that case, we need to investigate the variable's
size manually to specify just signedness.
This patch add signedness casting support. By specifying "s" or "u" as a
type, perf-probe will investigate variable size as usual and use the
specified signedness.
E.g. without this:
$ perf probe -a 'submit_bio bio->bi_iter.bi_sector'
Added new event:
probe:submit_bio (on submit_bio with bi_sector=bio->bi_iter.bi_sector)
You can now use it in all perf tools, such as:
perf record -e probe:submit_bio -aR sleep 1
$ cat trace_pipe|head
dbench-9692 [003] d..1 971.096633: submit_bio: (submit_bio+0x0/0x140) bi_sector=0x3a3d00
dbench-9692 [003] d..1 971.096685: submit_bio: (submit_bio+0x0/0x140) bi_sector=0x1a3d80
dbench-9692 [003] d..1 971.096687: submit_bio: (submit_bio+0x0/0x140) bi_sector=0x3a3d80
...
// need to investigate the variable size
$ perf probe -a 'submit_bio bio->bi_iter.bi_sector:s64'
Added new event:
probe:submit_bio (on submit_bio with bi_sector=bio->bi_iter.bi_sector:s64)
You can now use it in all perf tools, such as:
perf record -e probe:submit_bio -aR sleep 1
With this:
// just use "s" to cast its signedness
$ perf probe -v -a 'submit_bio bio->bi_iter.bi_sector:s'
Added new event:
probe:submit_bio (on submit_bio with bi_sector=bio->bi_iter.bi_sector:s)
You can now use it in all perf tools, such as:
perf record -e probe:submit_bio -aR sleep 1
$ cat trace_pipe|head
dbench-9689 [001] d..1 1212.391237: submit_bio: (submit_bio+0x0/0x140) bi_sector=128
dbench-9689 [001] d..1 1212.391252: submit_bio: (submit_bio+0x0/0x140) bi_sector=131072
dbench-9697 [006] d..1 1212.398611: submit_bio: (submit_bio+0x0/0x140) bi_sector=30208
This commit also update perf-probe.txt to describe "types". Most parts
are based on existing documentation: Documentation/trace/kprobetrace.txt
Committer note:
Testing using 'perf trace':
# perf probe -a 'submit_bio bio->bi_iter.bi_sector'
Added new event:
probe:submit_bio (on submit_bio with bi_sector=bio->bi_iter.bi_sector)
You can now use it in all perf tools, such as:
perf record -e probe:submit_bio -aR sleep 1
# trace --no-syscalls --ev probe:submit_bio
0.000 probe:submit_bio:(ffffffffac3aee00) bi_sector=0xc133c0)
3181.861 probe:submit_bio:(ffffffffac3aee00) bi_sector=0x6cffb8)
3181.881 probe:submit_bio:(ffffffffac3aee00) bi_sector=0x6cffc0)
3184.488 probe:submit_bio:(ffffffffac3aee00) bi_sector=0x6cffc8)
<SNIP>
4717.927 probe:submit_bio:(ffffffffac3aee00) bi_sector=0x4dc7a88)
4717.970 probe:submit_bio:(ffffffffac3aee00) bi_sector=0x4dc7880)
^C[root@jouet ~]#
Now, using this new feature:
[root@jouet ~]# perf probe -a 'submit_bio bio->bi_iter.bi_sector:s'
Added new event:
probe:submit_bio (on submit_bio with bi_sector=bio->bi_iter.bi_sector:s)
You can now use it in all perf tools, such as:
perf record -e probe:submit_bio -aR sleep 1
[root@jouet ~]# trace --no-syscalls --ev probe:submit_bio
0.000 probe:submit_bio:(ffffffffac3aee00) bi_sector=7145704)
0.017 probe:submit_bio:(ffffffffac3aee00) bi_sector=7145712)
0.019 probe:submit_bio:(ffffffffac3aee00) bi_sector=7145720)
2.567 probe:submit_bio:(ffffffffac3aee00) bi_sector=7145728)
5631.919 probe:submit_bio:(ffffffffac3aee00) bi_sector=0)
5631.941 probe:submit_bio:(ffffffffac3aee00) bi_sector=8)
5631.945 probe:submit_bio:(ffffffffac3aee00) bi_sector=16)
5631.948 probe:submit_bio:(ffffffffac3aee00) bi_sector=24)
^C#
With callchains:
# trace --no-syscalls --ev probe:submit_bio/max-stack=10/
0.000 probe:submit_bio:(ffffffffac3aee00) bi_sector=50662544)
submit_bio+0xa8200001 ([kernel.kallsyms])
submit_bh+0xa8200013 ([kernel.kallsyms])
jbd2_journal_commit_transaction+0xa8200691 ([kernel.kallsyms])
kjournald2+0xa82000ca ([kernel.kallsyms])
kthread+0xa82000d8 ([kernel.kallsyms])
ret_from_fork+0xa820001f ([kernel.kallsyms])
0.023 probe:submit_bio:(ffffffffac3aee00) bi_sector=50662552)
submit_bio+0xa8200001 ([kernel.kallsyms])
submit_bh+0xa8200013 ([kernel.kallsyms])
jbd2_journal_commit_transaction+0xa8200691 ([kernel.kallsyms])
kjournald2+0xa82000ca ([kernel.kallsyms])
kthread+0xa82000d8 ([kernel.kallsyms])
ret_from_fork+0xa820001f ([kernel.kallsyms])
0.027 probe:submit_bio:(ffffffffac3aee00) bi_sector=50662560)
submit_bio+0xa8200001 ([kernel.kallsyms])
submit_bh+0xa8200013 ([kernel.kallsyms])
jbd2_journal_commit_transaction+0xa8200691 ([kernel.kallsyms])
kjournald2+0xa82000ca ([kernel.kallsyms])
kthread+0xa82000d8 ([kernel.kallsyms])
ret_from_fork+0xa820001f ([kernel.kallsyms])
2.593 probe:submit_bio:(ffffffffac3aee00) bi_sector=50662568)
submit_bio+0xa8200001 ([kernel.kallsyms])
submit_bh+0xa8200013 ([kernel.kallsyms])
journal_submit_commit_record+0xa82001ac ([kernel.kallsyms])
jbd2_journal_commit_transaction+0xa82012e8 ([kernel.kallsyms])
kjournald2+0xa82000ca ([kernel.kallsyms])
kthread+0xa82000d8 ([kernel.kallsyms])
ret_from_fork+0xa820001f ([kernel.kallsyms])
^C#
Signed-off-by: Naohiro Aota <naohiro.aota@hgst.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1470710408-23515-1-git-send-email-naohiro.aota@hgst.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The symbols used in the tick_stop tracepoint were not being converted
properly into integers in the trace_stop format file. Instead we had this:
print fmt: "success=%d dependency=%s", REC->success,
__print_symbolic(REC->dependency, { 0, "NONE" },
{ (1 << TICK_DEP_BIT_POSIX_TIMER), "POSIX_TIMER" },
{ (1 << TICK_DEP_BIT_PERF_EVENTS), "PERF_EVENTS" },
{ (1 << TICK_DEP_BIT_SCHED), "SCHED" },
{ (1 << TICK_DEP_BIT_CLOCK_UNSTABLE), "CLOCK_UNSTABLE" })
User space tools have no idea how to parse "TICK_DEP_BIT_SCHED" or the other
symbols used to do the bit shifting. The reason is that the conversion was
done with using the TICK_DEP_MASK_* symbols which are just macros that
convert to the BIT shift itself (with the exception of NONE, which was
converted properly, because it doesn't use bits, and is defined as zero).
The TICK_DEP_BIT_* needs to be denoted by TRACE_DEFINE_ENUM() in order to
have this properly converted for user space tools to parse this event.
Cc: stable@vger.kernel.org
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Fixes: e6e6cc22e0 ("nohz: Use enum code for tick stop failure tracing message")
Reported-by: Luiz Capitulino <lcapitulino@redhat.com>
Tested-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When we don't have a tracee (i.e. we're attaching to a task or CPU),
counters can still be running after our workload finishes, and can still
be running as we read their values. As we read events one-by-one, there
can be arbitrary skew between values of events, even within a group.
This means that ratios within an event group are not reliable.
This skew can be seen if measuring a group of identical events, e.g:
# perf stat -a -C0 -e '{cycles,cycles}' sleep 1
To avoid this, we must stop groups from counting before we read the
values of any constituent events. This patch adds and makes use of a new
disable_counters() helper, which disables group leaders (and thus each
group as a whole). This mirrors the use of enable_counters() for
starting event groups in the absence of a tracee.
Closing a group leader splits the group, and without a disabled group
leader the newly split events will begin counting. Thus to ensure counts
are reliable we must defer closing group leaders until all counts have
been read. To do so this patch removes the event closing logic from the
read_counters() helper, explicitly closes the events using
perf_evlist__close(), which also aids legibility.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1470747869-3567-1-git-send-email-mark.rutland@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This was an oversight while merging these functions. Fix it.
Cc: Honghui Zhang <honghui.zhang@mediatek.com>
Fixes: 9ca340c98c ('iommu/mediatek: move the common struct into header file')
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch fixes fives off-by-one bugs in the ftdi-elan driver code. The
bug can be triggered by plugging a USB adapter for CardBus 3G cards (model
U132 manufactured by Elan Digital Systems, Ltd), causing a kernel panic.
The fix was tested on Ubuntu 14.04.4 with 4.7.0-rc14.2.0-27-generic+ and
4.4.0-22-generic+ kernel. In the ftdi_elan_synchronize function, an
off-by-one memory corruption occurs when packet_bytes is equal or bigger
than m. After having read m bytes, that is bytes_read is equal to m, "
..\x00" is still copied to the stack variable causing an out bounds write
of 4 bytes, which overwrites the stack canary and results in a kernel
panic.
This off-by-one requires physical access to the machine. It is not
exploitable since we have no control on the overwritten data. Similar
off-by-one bugs have been observed in 4 other functions:
ftdi_elan_stuck_waiting, ftdi_elan_read, ftdi_elan_edset_output and
ftdi_elan_flush_input_fifo.
Reported-by: Alex Palesandro <palexster@gmail.com>
Signed-off-by: Xiao Han <xiao.han@orange.fr>
Tested-by: Paul Chaignon <pchaigno@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For case 14 and case 21, their correct return value is the number
of bytes transferred, so it is a positive integer. But in usbtest_ioctl,
it takes non-zero as false return value for usbtest_do_ioctl, so
it will treat the correct test as wrong test, then the time on
tests will be the minus value.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Cc: stable <stable@vger.kernel.org>
Fixes: 18fc4ebdc7 ("usb: misc: usbtest: Remove timeval usage")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The locking in hub_activate() is not adequate to provide full mutual
exclusion with hub_quiesce(). The subroutine locks the hub's
usb_interface, but the callers of hub_quiesce() (such as
hub_pre_reset() and hub_event()) hold the lock to the hub's
usb_device.
This patch changes hub_activate() to make it acquire the same lock as
those other routines.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org> #4.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The early-exit pathway in hub_activate, added by commit e50293ef97
("USB: fix invalid memory access in hub_activate()") needs
improvement. It duplicates code that is already present at the end of
the subroutine, and it neglects to undo the effect of a
usb_autopm_get_interface_no_resume() call.
This patch fixes both problems by making the early-exit pathway jump
directly to the end of the subroutine. It simplifies the code at the
end by merging two conditionals that actually test the same condition
although they appear different: If type < HUB_INIT3 then type must be
either HUB_INIT2 or HUB_INIT, and it can't be HUB_INIT because in that
case the subroutine would have exited earlier.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org> #4.4+
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Memory leak and unbalanced reference count:
If the hub gets disconnected while the core is still activating it, this
can result in leaking memory of few USB structures.
This will happen if we have done a kref_get() from hub_activate() and
scheduled a delayed work item for HUB_INIT2/3. Now if hub_disconnect()
gets called before the delayed work expires, then we will cancel the
work from hub_quiesce(), but wouldn't do a kref_put(). And so the
unbalance.
kmemleak reports this as (with the commit e50293ef97 backported to
3.10 kernel with other changes, though the same is true for mainline as
well):
unreferenced object 0xffffffc08af5b800 (size 1024):
comm "khubd", pid 73, jiffies 4295051211 (age 6482.350s)
hex dump (first 32 bytes):
30 68 f3 8c c0 ff ff ff 00 a0 b2 2e c0 ff ff ff 0h..............
01 00 00 00 00 00 00 00 00 94 7d 40 c0 ff ff ff ..........}@....
backtrace:
[<ffffffc0003079ec>] create_object+0x148/0x2a0
[<ffffffc000cc150c>] kmemleak_alloc+0x80/0xbc
[<ffffffc000303a7c>] kmem_cache_alloc_trace+0x120/0x1ac
[<ffffffc0006fa610>] hub_probe+0x120/0xb84
[<ffffffc000702b20>] usb_probe_interface+0x1ec/0x298
[<ffffffc0005d50cc>] driver_probe_device+0x160/0x374
[<ffffffc0005d5308>] __device_attach+0x28/0x4c
[<ffffffc0005d3164>] bus_for_each_drv+0x78/0xac
[<ffffffc0005d4ee0>] device_attach+0x6c/0x9c
[<ffffffc0005d42b8>] bus_probe_device+0x28/0xa0
[<ffffffc0005d23a4>] device_add+0x324/0x604
[<ffffffc000700fcc>] usb_set_configuration+0x660/0x6cc
[<ffffffc00070a350>] generic_probe+0x44/0x84
[<ffffffc000702914>] usb_probe_device+0x54/0x74
[<ffffffc0005d50cc>] driver_probe_device+0x160/0x374
[<ffffffc0005d5308>] __device_attach+0x28/0x4c
Deadlocks:
If the hub gets disconnected early enough (i.e. before INIT2/INIT3 are
finished and the init_work is still queued), the core may call
hub_quiesce() after acquiring interface device locks and it will wait
for the work to be cancelled synchronously. But if the work handler is
already running in parallel, it may try to acquire the same interface
device lock and this may result in deadlock.
Fix both the issues by removing the call to cancel_delayed_work_sync().
CC: <stable@vger.kernel.org> #4.4+
Fixes: e50293ef97 ("USB: fix invalid memory access in hub_activate()")
Reported-by: Manu Gautam <mgautam@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The recent commit 599d0c954f ("mm, vmscan: move LRU lists to node"),
changed memory management code so that show_mem() is no longer safe to
call prior to setup_per_cpu_pageset(), as pgdat->per_cpu_nodestats will
still be NULL. This causes an oops on metag due to the call to
show_mem() from mem_init():
node_page_state_snapshot(...) + 0x48
pgdat_reclaimable(struct pglist_data * pgdat = 0x402517a0)
show_free_areas(unsigned int filter = 0) + 0x2cc
show_mem(unsigned int filter = 0) + 0x18
mem_init()
mm_init()
start_kernel() + 0x204
This wasn't a problem before with zone_reclaimable() as zone_pcp_init()
was already setting zone->pageset to &boot_pageset, via setup_arch() and
paging_init(), which happens before mm_init():
zone_pcp_init(...)
free_area_init_core(...) + 0x138
free_area_init_node(int nid = 0, ...) + 0x1a0
free_area_init_nodes(...) + 0x440
paging_init(unsigned long mem_end = 0x4fe00000) + 0x378
setup_arch(char ** cmdline_p = 0x4024e038) + 0x2b8
start_kernel() + 0x54
No other arches appear to call show_mem() during boot, and it doesn't
really add much value to the log, so lets just drop it from mem_init().
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: linux-metag@vger.kernel.org
There only ever have been two host implementations of the old
s390-virtio (pre-ccw) transport: the experimental kuli userspace,
and qemu. As qemu switched its default to ccw with 2.4 (with most
users having used ccw well before that) and removed the old transport
entirely in 2.6, s390-virtio probably hasn't been in active use for
quite some time and is therefore likely to bitrot.
Let's start the slow march towards removing the code by deprecating
it.
Note that this also deprecates the early virtio console code, which
has been causing trouble in the guest without being wired up in any
relevant hypervisor code.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In case the registration of the hvc tty never happens AND the kernel
thinks that hvc0 is the preferred console we should keep the early
printk function to avoid a kernel panic due to code being removed.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jing Liu <liujbjl@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We do a lot of memory allocation in function init_vq, and don't handle
the allocation failure properly. Then this function will return 0,
although initialization fails due to lacking memory. At that moment,
kernel will panic in guest machine, if virtio is used to drive disk.
To fix this bug, we should take care of allocation failure, and return
correct value to let caller know what happen.
Tested-by: Chao Fan <fanc.fnst@cn.fujitsu.com>
Signed-off-by: Minfei Huang <mnghuan@gmail.com>
Signed-off-by: Minfei Huang <minfei.hmf@alibaba-inc.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stash the packet length in a local variable before handing over
ownership of the packet to virtio_transport_recv_pkt() or
virtio_transport_free_pkt().
This patch solves the use-after-free since pkt is no longer guaranteed
to be alive.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
On error, virtqueue_add calls START_USE but not
END_USE. Thankfully that's normally empty anyway,
but might not be when debugging. Fix it up.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When using the indirect buffers feature, 'desc' is allocated in
virtqueue_add() but isn't freed before leaving on a ring full error,
causing a memory leak.
For example, it seems rather clear that this can trigger
with virtio net if mergeable buffers are not used.
Cc: stable@vger.kernel.org
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since 6de62f15b5 ("crypto: algif_hash - Require setkey before
accept(2)"), the AF_ALG interface requires userspace to provide a key
to any algorithm that has a setkey method. However, the non-HMAC
algorithms are not keyed, so setting a key is unnecessary.
Fix this by removing the setkey method from the non-keyed hash
algorithms.
Fixes: 6de62f15b5 ("crypto: algif_hash - Require setkey before accept(2)")
Cc: <stable@vger.kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The optimised crc32c implementation depends on VMX (aka. Altivec)
instructions, so the kernel must be built with Altivec support in order
for the crc32c code to build.
Fixes: 6dd7a82cc5 ("crypto: powerpc - Add POWER8 optimised crc32c")
Acked-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Enable the hard limit of cpu count by set boot options nr_cpus=x
on arm64, and make a minor change about message when total number
of cpu exceeds the limit.
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reported-by: Shiyuan Hu <hushiyuan@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The generic allocation code may sometimes decide to assign a prefetchable
64-bit BAR to the M32 window. In fact it may also decide to allocate
a 64-bit non-prefetchable BAR to the M64 one ! So using the resource
flags as a test to decide which window was used for PE allocation is
just wrong and leads to insane PE numbers.
Instead, compare the addresses to figure it out.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Rename the function as agreed by Ben & Gavin]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
A newly added bugfix caused an uninitialized variable to be
used for printing debug output. This is harmless as long
as the debug setting is disabled, but otherwise leads to an
immediate crash.
gcc warns about this when -Wmaybe-uninitialized is enabled:
net/rxrpc/call_object.c: In function 'rxrpc_release_call':
net/rxrpc/call_object.c:496:163: error: 'sp' may be used uninitialized in this function [-Werror=maybe-uninitialized]
The initialization was removed but one of the users remains.
This adds back the initialization.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 372ee16386 ("rxrpc: Fix races between skb free, ACK generation and replying")
Signed-off-by: David Howells <dhowells@redhat.com>
When machine check occurs with MSR(RI=0), it means MC interrupt is
unrecoverable and kernel goes down to panic path. But the console
message still shows it as recovered. This patch fixes the MCE console
messages.
Fixes: 36df96f8ac ("powerpc/book3s: Decode and save machine check event.")
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Currently, user can add a conntrack with different l4proto via nfnetlink.
For example, original tuple is TCP while reply tuple is SCTP. This is
invalid combination, we should report EINVAL to userspace.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Like NFQNL_MSG_VERDICT_BATCH do, we should also reject the verdict
request when the portid is not same with the initial portid(maybe
from another process).
Fixes: 97d32cf944 ("netfilter: nfnetlink_queue: batch verdict support")
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
User can use NFQA_EXP to attach expectations to conntracks, but we
forget to put back nf_conntrack_expect when it is inserted successfully,
i.e. in this normal case, expect's use refcnt will be 3. So even we
unlink it and put it back later, the use refcnt is still 1, then the
memory will be leaked forever.
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The 'name' filed in struct nf_conntrack_expect_policy{} is not a
pointer, so check it is NULL or not will always return true. Even if the
name is empty, slash will always be displayed like follows:
# cat /proc/net/nf_conntrack_expect
297 l3proto = 2 proto=6 src=1.1.1.1 dst=2.2.2.2 sport=1 dport=1025 ftp/
^
Fixes: 3a8fc53a45 ("netfilter: nf_ct_helper: allocate 16 bytes for the helper and policy names")
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The tick_nohz_stop_sched_tick() routine is not properly
canceling the sched timer when nothing is pending, because
get_next_timer_interrupt() is no longer returning KTIME_MAX in
that case. This causes periodic interrupts when none are needed.
When determining the next interrupt time, we first use
__next_timer_interrupt() to get the first expiring timer in the
timer wheel. If no timer is found, we return the base clock value
plus NEXT_TIMER_MAX_DELTA to indicate there is no timer in the
timer wheel.
Back in get_next_timer_interrupt(), we set the "expires" value
by converting the timer wheel expiry (in ticks) to a nsec value.
But we don't want to do this if the timer wheel expiry value
indicates no timer; we want to return KTIME_MAX.
Prior to commit 500462a9de ("timers: Switch to a non-cascading
wheel") we checked base->active_timers to see if any timers
were active, and if not, we didn't touch the expiry value and so
properly returned KTIME_MAX. Now we don't have active_timers.
To fix this, we now just check the timer wheel expiry value to
see if it is "now + NEXT_TIMER_MAX_DELTA", and if it is, we don't
try to compute a new value based on it, but instead simply let the
KTIME_MAX value in expires remain.
Fixes: 500462a9de "timers: Switch to a non-cascading wheel"
Signed-off-by: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/1470688147-22287-1-git-send-email-cmetcalf@mellanox.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Bharat Kumar Gogada reported issues with the generic MSI code, where the
end-point ended up with garbage in its MSI configuration (both for the vector
and the message).
It turns out that the two MSI paths in the kernel are doing slightly different
things:
generic MSI: disable MSI -> allocate MSI -> enable MSI -> setup EP
PCI MSI: disable MSI -> allocate MSI -> setup EP -> enable MSI
And it turns out that end-points are allowed to latch the content of the MSI
configuration registers as soon as MSIs are enabled. In Bharat's case, the
end-point ends up using whatever was there already, which is not what you
want.
In order to make things converge, we introduce a new MSI domain flag
(MSI_FLAG_ACTIVATE_EARLY) that is unconditionally set for PCI/MSI. When set,
this flag forces the programming of the end-point as soon as the MSIs are
allocated.
A consequence of this is that we have an extra activate in irq_startup, but
that should be without much consequence.
tglx:
- Several people reported a VMWare regression with PCI/MSI-X passthrough. It
turns out that the patch also cures that issue.
- We need to have a look at the MSI disable interrupt path, where we write
the msg to all zeros without disabling MSI in the PCI device. Is that
correct?
Fixes: 52f518a3a7 "x86/MSI: Use hierarchical irqdomains to manage MSI interrupts"
Reported-and-tested-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Reported-and-tested-by: Foster Snowhill <forst@forstwoof.ru>
Reported-by: Matthias Prager <linux@matthiasprager.de>
Reported-by: Jason Taylor <jason.taylor@simplivity.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1468426713-31431-1-git-send-email-marc.zyngier@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The doorbell offset is formatted with a 0x prefix to suggest it is
a hexadecimal value, when in fact %d is being used and this is confusing.
Use %X instead to match the proceeding 0x prefix.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
The recent commit 63a72284b1 ("powerpc/pci: Assign fixed PHB number
based on device-tree properties"), added code to read a 64-bit property
from the device tree, and if not found read a 32-bit property (reg).
There was a bug in the 32-bit case, on big endian machines, due to the
use of the 64-bit value to read the 32-bit property. The cast of &prop
means we end up writing to the high 32-bit of prop, leaving the low
32-bits containing whatever junk was on the stack.
If that junk value was non-zero, and < MAX_PHBS, we would end up using
it as the PHB id. This results in users seeing what appear to be random
PHB ids.
Fix it by reading into a u32 property and then assigning that to the
u64 value, letting the CPU do the correct conversions for us.
Fixes: 63a72284b1 ("powerpc/pci: Assign fixed PHB number based on device-tree properties")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This is a very minor/trivial fix for the output of PCI address on EEH
logs. The PCI address on "OF node" field currently is using ":" as a
separator for the function, but the usual separator is ".". This patch
changes the separator to dot, so the PCI address is printed as usual.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit f67a6722d6 ("cxl: Workaround PE=0 hardware limitation in
Mellanox CX4") added a "min_pe" field to struct cxl_service_layer_ops,
to allow us to work around a Mellanox CX-4 hardware limitation.
When allocating the PE number in cxl_context_init(), we read from
ctx->afu->adapter->native->sl_ops->min_pe to get the minimum PE number.
Unsurprisingly, in a PowerVM guest ctx->afu->adapter->native is NULL,
and guests don't have a cxl_service_layer_ops struct anywhere.
Move min_pe from struct cxl_service_layer_ops to struct cxl so it's
accessible in both native and PowerVM environments. For the Mellanox
CX-4, set the min_pe value in set_sl_ops().
Fixes: f67a6722d6 ("cxl: Workaround PE=0 hardware limitation in Mellanox CX4")
Reported-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Ian Munsie <imunsie@au1.ibm.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch fixes a regression introduced by commit b810253bd9 ("cxl:
Add mechanism for delivering AFU driver specific events").
It changes the type u8 to __u8 in the uapi header cxl.h, because the
former is a kernel internal type, and may not be defined in userland
build environments, in particular when cross-compiling libcxl on x86_64
linux machines (RHEL6.7 and Ubuntu 16.04).
This patch also changes the size of the field data_size, and makes it
constant, to support 32-bit userland applications running on big-endian
ppc64 kernels transparently.
mpe: This is an ABI change, however the ABI was only added during the
4.8 merge window so has never been part of a released kernel - therefore
we give ourselves permission to change it.
Fixes: b810253bd9 ("cxl: Add mechanism for delivering AFU driver specific events")
Signed-off-by: Philippe Bergheaud <felix@linux.vnet.ibm.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Some powerpc builds fail with the following buld error.
In file included from ./arch/powerpc/include/asm/mmu_context.h:11:0,
from arch/powerpc/kernel/vdso.c:28:
arch/powerpc/include/asm/cputhreads.h: In function 'get_tensr':
arch/powerpc/include/asm/cputhreads.h:101:2: error:
implicit declaration of function 'cpu_has_feature'
Fixes: b92a226e52 ("powerpc: Move cpu_has_feature() to a separate file")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch fixes the following warning:
arch/powerpc/platforms/pseries/hotplug-memory.c:323:29: error: 'lmb_to_memblock' defined but not used [-Werror=unused-function]
static struct memory_block *lmb_to_memblock(struct of_drconf_cell *lmb)
^~~~~~~~~~~~~~~
The only consumer of this function is 'dlpar_remove_lmb', which is
enabled with CONFIG_MEMORY_HOTREMOVE, so move it into the same
ifdef block.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The current implementation of MCE early handling modifies CR0/1 registers
without saving its old values. Fix this by moving early check for
powersaving mode to machine_check_handle_early().
The power architecture 2.06 or later allows the possibility of getting
machine check while in nap/sleep/winkle. The last bit of HSPRG0 is set
to 1, if thread is woken up from winkle. Hence, clear the last bit of
HSPRG0 (r13) before MCE handler starts using it as paca pointer.
Also, the current code always puts the thread into nap state irrespective
of whatever idle state it woke up from. Fix that by looking at
paca->thread_idle_state and put the thread back into same state where it
came from.
Fixes: 1c51089f77 ("powerpc/book3s: Return from interrupt if coming from evil context.")
Reported-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Reviewed-by: Shreyas B. Prabhu <shreyas@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
VF0610 does not support reading the sample rate which leads to many
lines of "cannot get freq at ep 0x82". This patch adds the USB ID
(0x041E:4080) to snd_usb_get_sample_rate_quirk() list.
Signed-off-by: Piotr Karasinski <peter.karasinski@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Sudarsana Reddy Kalluru says:
====================
qed: dcbx fix series.
The patch series contains the minor bug fixes for qed dcbx module.
Please consider applying this to 'net' branch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
MFW now supports the Selection field for IEEE mode. Add driver changes to
use the newer MFW masks to read/write the port-id value.
Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Endian-ness conversion is not needed for priority-to-TC field as the
field is already being read/written by the driver in big-endian way.
Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move IDLE_STATE_ENTER_SEQ macro to cpuidle.h so that MCE handler changes
in subsequent patch can use it.
No functionality change.
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The function pnv_restore_hyp_resource() loads the TOC into r2 from
the invalid PACA pointer before fixing r13 value. This do not affect
POWER ISA 3.0 but it does have an impact on POWER ISA 2.07 or less
leading CPU to get stuck forever.
login: [ 471.830433] Processor 120 is stuck.
This can be easily reproducible using following steps:
- Turn off SMT
$ ppc64_cpu --smt=off
- offline/online any online cpu (Thread 0 of any core which is online)
$ echo 0 > /sys/devices/system/cpu/cpu<num>/online
$ echo 1 > /sys/devices/system/cpu/cpu<num>/online
For POWER ISA 2.07 or less, the last bit of HSPRG0 is set indicating
that thread is waking up from winkle. Hence, the last bit of HSPRG0(r13)
needs to be clear before accessing it as PACA to avoid loading invalid
values from invalid PACA pointer.
Fix this by loading TOC after r13 register is corrected.
Fixes: bcef83a00d ("powerpc/powernv: Add platform support for stop instruction")
Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Acked-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Commit fd141d1a99 ("powerpc/powernv/pci: Rework accessing the TCE
invalidate register") broke TCE invalidation on IODA2/PHB3 for real
mode.
This makes invalidate work again.
Fixes: fd141d1a99 ("powerpc/powernv/pci: Rework accessing the TCE invalidate register")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This sets the type of the interrupt appropriately. We set it as follow:
- If not mapped from the device-tree, we use edge. This is the case
of the virtual interrupts and PCI MSIs for example.
- If mapped from the device-tree and #interrupt-cells is 2 (PAPR
compliant), we use the second cell to set the appropriate type
- If mapped from the device-tree and #interrupt-cells is 1 (current
OPAL on P8 does that), we assume level sensitive since those are
typically going to be the PSI LSIs which are level sensitive.
Additionally, we mark the interrupts requested via the opal_interrupts
property all level. This is a bit fishy but the best we can do until we
fix OPAL to properly expose them with a complete descriptor. It is also
correct for the current HW anyway as OPAL interrupts are currently PCI
error and PSI interrupts which are level.
Finally now that edge interrupts are properly identified, we can enable
CONFIG_HARDIRQS_SW_RESEND which will make the core re-send them if
they occur while masked, which some drivers rely upon.
This fixes issues with lost interrupts on some Mellanox adapters.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch utilises the GENERIC_CPU_AUTOPROBE infrastructure
to automatically load the crc32c-vpmsum module if the CPU supports
it.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
cirrus_modeset_init() is initializing/registering the emulated fbdev
and, since commit c61b93fe51 ("drm/atomic: Fix remaining places where
!funcs->best_encoder is valid"), DRM internals can access/test some of
the fields in mode_config->funcs as part of the fbdev registration
process.
Make sure dev->mode_config.funcs is properly set to avoid dereferencing
a NULL pointer.
Reported-by: Mike Marshall <hubcap@omnibond.com>
Reported-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Fixes: c61b93fe51 ("drm/atomic: Fix remaining places where !funcs->best_encoder is valid")
Signed-off-by: Dave Airlie <airlied@redhat.com>
In aacraid's ioctl_send_fib() we do two fetches from userspace, one the
get the fib header's size and one for the fib itself. Later we use the
size field from the second fetch to further process the fib. If for some
reason the size from the second fetch is different than from the first
fix, we may encounter an out-of- bounds access in aac_fib_send(). We
also check the sender size to insure it is not out of bounds. This was
reported in https://bugzilla.kernel.org/show_bug.cgi?id=116751 and was
assigned CVE-2016-6480.
Reported-by: Pengfei Wang <wpengfeinudt@gmail.com>
Fixes: 7c00ffa31 '[SCSI] 2.6 aacraid: Variable FIB size (updated patch)'
Cc: stable@vger.kernel.org
Signed-off-by: Dave Carroll <david.carroll@microsemi.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This adds support for building more complex gcc plugins that live in a
subdirectory instead of just in a single source file.
Reported-by: PaX Team <pageexec@freemail.hu>
Signed-off-by: Emese Revfy <re.emese@gmail.com>
[kees: clarified commit message]
Signed-off-by: Kees Cook <keescook@chromium.org>
There's no reason to repeat the same names in the Makefile when the .so
files have already been listed. The .o list can be generated from them.
Reported-by: PaX Team <pageexec@freemail.hu>
Signed-off-by: Emese Revfy <re.emese@gmail.com>
[kees: clarified commit message]
Signed-off-by: Kees Cook <keescook@chromium.org>
The latent_entropy plugin needs to pass arguments, so this adds the
support.
Signed-off-by: Emese Revfy <re.emese@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
When the compiler doesn't support gcc plugins (either due to missing
headers or too old a version), report the problem and abort the build
instead of emitting a warning and letting the build founder with arcane
compiler errors.
Signed-off-by: Kees Cook <keescook@chromium.org>
According to E-EDID spec 1.3, table 3.9, a digital video sink with the
"DFP 1.x compliant TMDS" bit set is "signal compatible with VESA DFP 1.x
TMDS CRGB, 1 pixel / clock, up to 8 bits / color MSB aligned".
For such displays, the DFP spec 1.0, section 3.10 "EDID support" says:
"If the DFP monitor only supports EDID 1.X (1.1, 1.2, etc.)
without extensions, the host will make the following assumptions:
1. 24-bit MSB-aligned RGB TFT
2. DE polarity is active high
3. H and V syncs are active high
4. Established CRT timings will be used
5. Dithering will not be enabled on the host"
So if we don't know the bit depth of the display from additional
colorimetry info we should assume 8 bpc / 24 bpp by default.
This patch adds info->bpc = 8 assignement for that case.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This reverts commit 013dd9e038
("drm/i915/dp: fall back to 18 bpp when sink capability is unknown")
This commit introduced a regression into stable kernels,
as it reduces output color depth to 6 bpc for any video
sink connected to a Displayport connector if that sink
doesn't report a specific color depth via EDID, or if
our EDID parser doesn't actually recognize the proper
bpc from EDID.
Affected are active DisplayPort->VGA converters and
active DisplayPort->DVI converters. Both should be
able to handle 8 bpc, but are degraded to 6 bpc with
this patch.
The reverted commit was meant to fix
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=105331
A followup patch implements a fix for that specific bug,
which is caused by a faulty EDID of the affected DP panel
by adding a new EDID quirk for that panel.
DP 18 bpp fallback handling and other improvements to
DP sink bpc detection will be handled for future
kernels in a separate series of patches.
Please backport to stable.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Bugzilla https://bugzilla.kernel.org/show_bug.cgi?id=105331
reports that the "AEO model 0" display is driven with 8 bpc
without dithering by default, which looks bad because that
panel is apparently a 6 bpc DP panel with faulty EDID.
A fix for this was made by commit 013dd9e038
("drm/i915/dp: fall back to 18 bpp when sink capability is unknown").
That commit triggers new regressions in precision for DP->DVI and
DP->VGA displays. A patch is out to revert that commit, but it will
revert video output for the AEO model 0 panel to 8 bpc without
dithering.
The EDID 1.3 of that panel, as decoded from the xrandr output
attached to that bugzilla bug report, is somewhat faulty, and beyond
other problems also sets the "DFP 1.x compliant TMDS" bit, which
according to DFP spec means to drive the panel with 8 bpc and
no dithering in absence of other colorimetry information.
Try to make the original bug reporter happy despite the
faulty EDID by adding a quirk to mark that panel as 6 bpc,
so 6 bpc output with dithering creates a nice picture.
Tested by injecting the edid from the fdo bug into a DP connector
via drm_kms_helper.edid_firmware and verifying the 6 bpc + dithering
is selected.
This patch should be backported to stable.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Pull lkdtm update from Kees Cook:
"Fix rebuild problem with LKDTM's rodata test"
[ This, and the usercopy branch, both came in before the merge window
closed, but ended up in my 'need to look more' queue and thus got
merged only after rc1 was out ]
* tag 'lkdtm-v4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lkdtm: Fix targets for objcopy usage
lkdtm: fix false positive warning from -Wmaybe-uninitialized
There are multiple cases in vfio_pci_set_ctx_trigger_single() where
we assume we can safely read from our data pointer without actually
checking whether the user has passed any data via the count field.
VFIO_IRQ_SET_DATA_NONE in particular is entirely broken since we
attempt to pull an int32_t file descriptor out before even checking
the data type. The other data types assume the data pointer contains
one element of their type as well.
In part this is good news because we were previously restricted from
doing much sanitization of parameters because it was missed in the
past and we didn't want to break existing users. Clearly DATA_NONE
is completely broken, so it must not have any users and we can fix
it up completely. For DATA_BOOL and DATA_EVENTFD, we'll just
protect ourselves, returning error when count is zero since we
previously would have oopsed.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reported-by: Chris Thompson <the_cartographer@hotmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Commit 52253db924 ("sctp: also point GSO head_skb to the sk when
it's available") used event->chunk->head_skb to get the head_skb in
sctp_ulpevent_set_owner().
But at that moment, the event->chunk was NULL, as it cloned the skb
in sctp_ulpevent_make_rcvmsg(). Therefore, that patch didn't really
work.
This patch is to move the event->chunk initialization before calling
sctp_ulpevent_receive_data() so that it uses event->chunk when it's
valid.
Fixes: 52253db924 ("sctp: also point GSO head_skb to the sk when it's available")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
vxlan driver has bypass for local vxlan traffic, but that
depends on information about all VNIs on local system in
vxlan driver. This is not available in case of LWT.
Therefore following patch disable encap bypass for LWT
vxlan traffic.
Fixes: ee122c79d4 ("vxlan: Flow based tunneling").
Reported-by: Jakub Libosvar <jlibosva@redhat.com>
Signed-off-by: Pravin B Shelar <pshelar@ovn.org>
Acked-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
LWT user can specify destination as well as source ip address
for given tunnel endpoint. But vxlan is ignoring given source
ip address. Following patch uses both ip address to route the
tunnel packet. This consistent with other LWT implementations,
like GENEVE and GRE.
Fixes: ee122c79d4 ("vxlan: Flow based tunneling").
Signed-off-by: Pravin B Shelar <pshelar@ovn.org>
Acked-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
Few BPF helper related checksum fixes
The set contains three fixes with regards to CHECKSUM_COMPLETE
and BPF helper functions. For details please see individual
patches.
Thanks!
v1 -> v2:
- Fixed make htmldocs issue reported by kbuild bot.
- Rest as is.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When having skbs on ingress with CHECKSUM_COMPLETE, tc BPF programs don't
push rcsum of mac header back in and after BPF run back pull out again as
opposed to some other subsystems (ovs, for example).
For cases like q-in-q, meaning when a vlan tag for offloading is already
present and we're about to push another one, then skb_vlan_push() pushes the
inner one into the skb, increasing mac header and skb_postpush_rcsum()'ing
the 4 bytes vlan header diff. Likewise, for the reverse operation in
skb_vlan_pop() for the case where vlan header needs to be pulled out of the
skb, we're decreasing the mac header and skb_postpull_rcsum()'ing the 4 bytes
rcsum of the vlan header that was removed.
However mangling the rcsum here will lead to hw csum failure for BPF case,
since we're pulling or pushing data that was not part of the current rcsum.
Changing tc BPF programs in general to push/pull rcsum around BPF_PROG_RUN()
is also not really an option since current behaviour is ABI by now, but apart
from that would also mean to do quite a bit of useless work in the sense that
usually 12 bytes need to be rcsum pushed/pulled also when we don't need to
touch this vlan related corner case. One way to fix it would be to push the
necessary rcsum fixup down into vlan helpers that are (mostly) slow-path
anyway.
Fixes: 4e10df9a60 ("bpf: introduce bpf_skb_vlan_push/pop() helpers")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
bpf_skb_store_bytes() invocations above L2 header need BPF_F_RECOMPUTE_CSUM
flag for updates, so that CHECKSUM_COMPLETE will be fixed up along the way.
Where we ran into an issue with bpf_skb_store_bytes() is when we did a
single-byte update on the IPv6 hoplimit despite using BPF_F_RECOMPUTE_CSUM
flag; simple ping via ICMPv6 triggered a hw csum failure as a result. The
underlying issue has been tracked down to a buffer alignment issue.
Meaning, that csum_partial() computations via skb_postpull_rcsum() and
skb_postpush_rcsum() pair invoked had a wrong result since they operated on
an odd address for the hoplimit, while other computations were done on an
even address. This mix doesn't work as-is with skb_postpull_rcsum(),
skb_postpush_rcsum() pair as it always expects at least half-word alignment
of input buffers, which is normally the case. Thus, instead of these helpers
using csum_sub() and (implicitly) csum_add(), we need to use csum_block_sub(),
csum_block_add(), respectively. For unaligned offsets, they rotate the sum
to align it to a half-word boundary again, otherwise they work the same as
csum_sub() and csum_add().
Adding __skb_postpull_rcsum(), __skb_postpush_rcsum() variants that take the
offset as an input and adapting bpf_skb_store_bytes() to them fixes the hw
csum failures again. The skb_postpull_rcsum(), skb_postpush_rcsum() helpers
use a 0 constant for offset so that the compiler optimizes the offset & 1
test away and generates the same code as with csum_sub()/_add().
Fixes: 608cd71a9c ("tc: bpf: generalize pedit action")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Follow-up to commit f8ffad69c9 ("bpf: add skb_postpush_rcsum and fix
dev_forward_skb occasions") to fix an issue for dev_queue_xmit() redirect
locations which need CHECKSUM_COMPLETE fixups on ingress.
For the same reasons as described in f8ffad69c9 already, we of course
also need this here, since dev_queue_xmit() on a veth device will let us
end up in the dev_forward_skb() helper again to cross namespaces.
Latter then calls into skb_postpull_rcsum() to pull out L2 header, so
that netif_rx_internal() sees CHECKSUM_COMPLETE as it is expected. That
is, CHECKSUM_COMPLETE on ingress covering L2 _payload_, not L2 headers.
Also here we have to address bpf_redirect() and bpf_clone_redirect().
Fixes: 3896d655f4 ("bpf: introduce bpf_clone_redirect() helper")
Fixes: 27b29f6305 ("bpf: add bpf_redirect() helper")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The call site for this function appears as:
#ifdef DEBUG
data->msg_enable = DEBUG;
dump_eth_one(dev);
#endif
...leading to the following warning for !DEBUG builds:
drivers/net/ethernet/tundra/tsi108_eth.c:169:13: warning: 'dump_eth_one' defined but not used [-Wunused-function]
static void dump_eth_one(struct net_device *dev)
^
...when using the arch/powerpc/configs/mpc7448_hpc2_defconfig
Put the function definition under the same #ifdef as the call site
to avoid the warning.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The low-level resume-from-hibernation code on x86-64 uses
kernel_ident_mapping_init() to create the temoprary identity mapping,
but that function assumes that the offset between kernel virtual
addresses and physical addresses is aligned on the PGD level.
However, with a randomized identity mapping base, it may be aligned
on the PUD level and if that happens, the temporary identity mapping
created by set_up_temporary_mappings() will not reflect the actual
kernel identity mapping and the image restoration will fail as a
result (leading to a kernel panic most of the time).
To fix this problem, rework kernel_ident_mapping_init() to support
unaligned offsets between KVA and PA up to the PMD level and make
set_up_temporary_mappings() use it as approprtiate.
Reported-and-tested-by: Thomas Garnier <thgarnie@google.com>
Reported-by: Borislav Petkov <bp@suse.de>
Suggested-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Yinghai Lu <yinghai@kernel.org>
When I initially added the unsafe_[get|put]_user() helpers in commit
5b24a7a2aa ("Add 'unsafe' user access functions for batched
accesses"), I made the mistake of modeling the interface on our
traditional __[get|put]_user() functions, which return zero on success,
or -EFAULT on failure.
That interface is fairly easy to use, but it's actually fairly nasty for
good code generation, since it essentially forces the caller to check
the error value for each access.
In particular, since the error handling is already internally
implemented with an exception handler, and we already use "asm goto" for
various other things, we could fairly easily make the error cases just
jump directly to an error label instead, and avoid the need for explicit
checking after each operation.
So switch the interface to pass in an error label, rather than checking
the error value in the caller. Best do it now before we start growing
more users (the signal handling code in particular would be a good place
to use the new interface).
So rather than
if (unsafe_get_user(x, ptr))
... handle error ..
the interface is now
unsafe_get_user(x, ptr, label);
where an error during the user mode fetch will now just cause a jump to
'label' in the caller.
Right now the actual _implementation_ of this all still ends up being a
"if (err) goto label", and does not take advantage of any exception
label tricks, but for "unsafe_put_user()" in particular it should be
fairly straightforward to convert to using the exception table model.
Note that "unsafe_get_user()" is much harder to convert to a clever
exception table model, because current versions of gcc do not allow the
use of "asm goto" (for the exception) with output values (for the actual
value to be fetched). But that is hopefully not a limitation in the
long term.
[ Also note that it might be a good idea to switch unsafe_get_user() to
actually _return_ the value it fetches from user space, but this
commit only changes the error handling semantics ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ido Schimmel says:
====================
mlxsw: DCB fixes
Patches 1 and 2 fix a problem in which PAUSE frames settings are wrongly
overridden when ieee_setpfc() gets called.
Patch 3 adds a missing rollback in port's creation error path.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We correctly execute mlxsw_sp_port_dcb_fini() when port is removed, but
I missed its rollback in the error path of port creation, so add it.
Fixes: f00817df2b ("mlxsw: spectrum: Introduce support for Data Center Bridging (DCB)")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PFCC register is used to configure both PAUSE and PFC frames.
Therefore, when PFC frames are disabled we must make sure we don't
mistakenly also disable PAUSE frames (which might be enabled).
Fix this by packing the PFCC register with the current PAUSE settings.
Note that this register is also accessed via ethtool ops, but there we
are guaranteed to have PFC disabled.
Fixes: d81a6bdb87 ("mlxsw: spectrum: Add IEEE 802.1Qbb PFC support")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When ieee_setpfc() gets called, PAUSE frames are not necessarily
disabled on the port.
Check if PAUSE frames are disabled or enabled and configure the port's
headroom buffer accordingly.
Fixes: d81a6bdb87 ("mlxsw: spectrum: Add IEEE 802.1Qbb PFC support")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Looks like a simple copy'n'paste error.
Fixes: 1aa661f5c3 ("rhashtable-test: Measure time to insert, remove & traverse entries")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
Phil Sutter says:
====================
sctp_diag: A bunch of fixes for upcoming 'ss' support
The following series contains a number of fixes necessary to make my yet
unpublished 'ss' support patch functional.
Changes since v1:
- Fixed patch 2/3
- Rebased whole series onto current net-next/master
Changes since v2:
- Improved description of patch 2/3
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since 'ss' always adds TCPF_CLOSE to idiag_states flags, sctp_diag can't
rely upon TCPF_LISTEN flag solely being present when listening sockets
are requested.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
The asoc's timer value is not kept in asoc->timeouts array but in it's
primary transport instead.
Furthermore, we must export the timer only if it is pending, otherwise
the value will underrun when stored in an unsigned variable and
user space will only see a very large timeout value.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is required to correctly interpret INET_DIAG_INFO messages exported
by sctp_diag module.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
Purely cosmetic at this point, as rbd doesn't use RADOS namespaces and
hence rbd_dev->header_oloc->pool_ns is always NULL.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The callback function of call_rcu() just calls a kfree(), so we
can use kfree_rcu() instead of call_rcu() + callback function.
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Fixes the following sparse warning:
net/ceph/mon_client.c:577:6: warning:
symbol 'cancel_generic_request' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In case of error, the function ceph_alloc_page_vector() returns
ERR_PTR() and never returns NULL. The NULL test in the return value
check should be replaced with IS_ERR().
Fixes: 1907920324 ('libceph: support for sending notifies')
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In commit 874f9c7da9 ("printk: create pr_<level> functions"), new
pr_level defines were added to printk.c.
These new defines are guarded by an #ifdef CONFIG_PRINTK - however,
there is already a surrounding #ifdef CONFIG_PRINTK starting a lot
earlier in line 249 which means the newly introduced #ifdef is
unnecessary.
Let's remove it to avoid confusion.
Signed-off-by: Andreas Ziegler <andreas.ziegler@fau.de>
Cc: Joe Perches <joe@perches.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
make C=2 reports:
CHECK drivers/clk/sunxi-ng/ccu_nk.c
drivers/clk/sunxi-ng/ccu_nk.c:17:6: warning: symbol 'ccu_nk_find_best' was
not declared. Should it be static?
ccu_nk_find_best is only used within ccu_nk.c. So make it static to get
rid of this warning.
Fixes: adbfb0056e ("clk: sunxi-ng: Add N-K-factor clock support")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The condition passed to read*_poll_timeout() is the break condition,
i.e. wait for this condition to happen and return success.
The original code assumed the opposite, resulting in a warning when
the PLL clock rate was changed but never lost it's lock as far as
the readout indicated. This was verified by checking the read out
register value.
Fixes: 1d80c14248 ("clk: sunxi-ng: Add common infrastructure")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
In case of error, the function of_io_request_and_map() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should be
replaced with IS_ERR().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
In case of error, the functions clk_register_composite() and
clk_register_divider() returns ERR_PTR() and never returns NULL.
The NULL test in the return value check should be replaced with
IS_ERR().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The "NVDIMM Block Window Driver Writer's Guide":
http://pmem.io/documents/NVDIMM_DriverWritersGuide-July-2016.pdf
...defines the layout of the block window status register. For the July
2016 version of the spec linked to above, this happens in Figure 4 on
page 26.
The only bits defined in this spec are bits 31, 5, 4, 2, 1 and 0. The
rest of the bits in the status register are reserved, and there is a
warning following the diagram that says:
Note: The driver cannot assume the value of the RESERVED bits in the
status register are zero. These reserved bits need to be masked off, and
the driver must avoid checking the state of those bits.
This change ensures that for hardware implementations that set these
reserved bits in the status register, the driver won't incorrectly fail the
block I/Os.
Cc: <stable@vger.kernel.org> #v4.2+
Reviewed-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
To be able to generate shared descriptors for AEAD, the authentication size
needs to be known. However, there is no imposed order of calling .setkey,
.setauthsize callbacks.
Thus, in case authentication size is not known at .setkey time, defer it
until .setauthsize is called.
The authsize != 0 check was incorrectly removed when converting the driver
to the new AEAD interface.
Cc: <stable@vger.kernel.org> # 4.3+
Fixes: 479bcc7c5b ("crypto: caam - Convert authenc to new AEAD interface")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are a few things missed by the conversion to the
new AEAD interface:
1 - echainiv(authenc) encrypt shared descriptor
The shared descriptor is incorrect: due to the order of operations,
at some point in time MATH3 register is being overwritten.
2 - buffer used for echainiv(authenc) encrypt shared descriptor
Encrypt and givencrypt shared descriptors (for AEAD ops) are mutually
exclusive and thus use the same buffer in context state: sh_desc_enc.
However, there's one place missed by s/sh_desc_givenc/sh_desc_enc,
leading to errors when echainiv(authenc(...)) algorithms are used:
DECO: desc idx 14: Header Error. Invalid length or parity, or
certain other problems.
While here, also fix a typo: dma_mapping_error() is checking
for validity of sh_desc_givenc_dma instead of sh_desc_enc_dma.
Cc: <stable@vger.kernel.org> # 4.3+
Fixes: 479bcc7c5b ("crypto: caam - Convert authenc to new AEAD interface")
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On 32-bit (e.g. with m68k-linux-gnu-gcc-4.1):
crypto/sha3_generic.c:27: warning: integer constant is too large for ‘long’ type
crypto/sha3_generic.c:28: warning: integer constant is too large for ‘long’ type
crypto/sha3_generic.c:29: warning: integer constant is too large for ‘long’ type
crypto/sha3_generic.c:29: warning: integer constant is too large for ‘long’ type
crypto/sha3_generic.c:31: warning: integer constant is too large for ‘long’ type
crypto/sha3_generic.c:31: warning: integer constant is too large for ‘long’ type
crypto/sha3_generic.c:32: warning: integer constant is too large for ‘long’ type
crypto/sha3_generic.c:32: warning: integer constant is too large for ‘long’ type
crypto/sha3_generic.c:32: warning: integer constant is too large for ‘long’ type
crypto/sha3_generic.c:33: warning: integer constant is too large for ‘long’ type
crypto/sha3_generic.c:33: warning: integer constant is too large for ‘long’ type
crypto/sha3_generic.c:34: warning: integer constant is too large for ‘long’ type
crypto/sha3_generic.c:34: warning: integer constant is too large for ‘long’ type
Fixes: 53964b9ee6 ("crypto: sha3 - Add SHA-3 hash algorithm")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
During qdio_shutdown the queue tasklets are killed for all inbound and
outbound queues. The queue structures might be freed after
qdio_shutdown.
Thus it must be guaranteed that these queue tasklets are not rescheduled
after that. In addition the outbound queue timers are deleted and it
must
be guaranteed that these timers are not restarted after qdio_shutdown
processing. Timer deletion should make use of del_timer_sync() to make
sure qdio_outbound_timer() is finished on other CPUs as well. Queue
tasklets should be scheduled in state QDIO_IRQ_STATE_ACTIVE only.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
In commit 99fc5ba0bf ("ARM: dts: imx6sx: add i.mx6sx sabreauto board
support") it should've been enable-sdio-wakeup (not -wakup). But that is
now considered a legacy name for wakeup-source, so directly use the new
name instead, as done in commit 26cefdd15d for the other occurrence.
Fixes: 26cefdd15d ("ARM: dts: imx: replace legacy wakeup property with 'wakeup-source'")
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Prior to starting IO qdio checks for the internal state of the ccw
device. These checks happen without locking, so consistency between
state evaluation and starting of the IO is not guaranteed.
Since the internal state is checked during ccw_device_start it is
safe to get rid of these additional checks.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
qdio sometimes checks return codes twice. First with the ccw device's
lock held and then a 2nd time after the lock is released. Simplify
the code by releasing the lock earlier and unify the return code
evaluation.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
All qdio functions that use spin_lock_irqsave are never used
from irq context. Thus it is safe to convert all of them to
use spin_lock_irq.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
A copy of struct subchannel_id is maintained in ccw_device_private.
The subchannel id is a property of the subchannel. The additional
copy is not needed.
Internal users can obtain it from subchannel.schid - device drivers
can use ccw_device_get_schid().
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
We want to get rid of the copy of struct subchannel_id maintained in
ccw_device_private, so obtain it from the subchannel directly.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
For all configs with CONFIG_BTRFS_FS = y we should also make the
optimized crc module builtin. Otherwise early mounts will fall
back to the software variant.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
if two string compare equal the clcle instruction will update the
string addresses to point _after_ the string. This might already
be on a different page, so we should not use these pointer to
calculate the difference as in that case the calculation of the
difference can cause oopses.
The return value of memcmp does not need the difference, we
can just reuse the condition code and return for CC=1 (All bytes
compared, first operand low) -1 and for CC=2 (All bytes compared,
first operand high) +1
strstr also does not need the diff.
While fixing this, make the common function clcle "correct on its
own" by using l1 instead of l2 for the first length. strstr will
call this with l2 for both strings.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: db7f5eef3d ("s390/lib: use basic blocks for inline assemblies")
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The current prealign logic will fail for sizes < alignment,
as the new datalen passed to the vector function is smaller
than zero. Being a size_t this gets wrapped to a huge
number causing memory overruns and wrong data.
Let's add an early exit if the size is smaller than the minimal
size with alignment. This will also avoid calling the software
fallback twice for all sizes smaller than the minimum size
(prealign + remaining)
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: f848dbd3bc ("s390/crc32-vx: add crypto API module for optimized CRC-32 algorithms")
Reviewed-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The way the decompressor is hooked into the start-up code is rather
subtle, with a mix of multiply-defined symbols and hardcoded address
literals. Add some comments at the junction points to clarify how it
works.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
of_node_put needs to be called when the device node which is got
from of_parse_phandle has finished using it.
Besides, of_address_to_resource always returns -EINVAL for error, delete
the assignment for ret.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
When a copy up of a directory occurs which has the opaque xattr set, the
xattr remains in the upper directory. The immediate behavior with overlayfs
is that the upper directory is not treated as opaque, however after a
remount the opaque flag is used and upper directory is treated as opaque.
This causes files created in the lower layer to be hidden when using
multiple lower directories.
Fix by not copying up the opaque flag.
To reproduce:
----8<---------8<---------8<---------8<---------8<---------8<----
mkdir -p l/d/s u v w mnt
mount -t overlay overlay -olowerdir=l,upperdir=u,workdir=w mnt
rm -rf mnt/d/
mkdir -p mnt/d/n
umount mnt
mount -t overlay overlay -olowerdir=u:l,upperdir=v,workdir=w mnt
touch mnt/d/foo
umount mnt
mount -t overlay overlay -olowerdir=u:l,upperdir=v,workdir=w mnt
ls mnt/d
----8<---------8<---------8<---------8<---------8<---------8<----
output should be: "foo n"
Reported-by: Derek McGowan <dmcg@drizz.net>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=151291
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
udriver struct allocated by kzalloc() will not be freed
if usb_register() and next calls fail. This patch fixes this
by adding one more step with kfree(udriver) in error path.
Signed-off-by: Alexey Klimov <klimov.linux@gmail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Currently, the ports as seen from the rear number as:
eth0 sfp lan5 lan4 lan3 lan2 lan1 lan6
which is illogical - this came about because the rev 2.0 boards have the
LEDs on the front for the DSA switch (lan5-1) reversed. Rev 2.1 boards
fixed the LED issue, and the Clearfog case numbers the lan ports
increasing from left to right.
Maintaining this illogical numbering causes confusion, with reports that
"my link isn't coming up" and "my connection negotiates 10base-Half"
both of which are due to people thinking that the port next to the SFP
is lan1.
Fix this by renumbering the ports to match people's expectations.
[gregory.clement@free-electrons.com: added the Fixes and stable tags]
Fixes: 4c945e8556 ("ARM: dts: Add SolidRun Armada 388 Clearfog A1 DT
file")
Cc: <stable@vger.kernel.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
This patch adds a set of compositions for Telit LE920A4.
Compositions in short are:
0x1207: tty + tty
0x1208: tty + adb + tty + tty
0x1211: tty + adb + ecm
0x1212: tty + adb
0x1213: ecm + tty
0x1214: tty + adb + ecm + tty
telit_le922_blacklist_usbcfg3 is reused for compositions 0x1211
and 0x1214 due to the same interfaces positions.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
BCM20706V2_EVAL is a WICED dev board designed with FT2232H USB 2.0
UART/FIFO IC.
To support BCM920706V2_EVAL dev board for WICED development on Linux.
Add the VID(0a5c) and PID(6422) to ftdi_sio driver to allow loading
ftdi_sio for this board.
Signed-off-by: Sheng-Hui J. Chu <s.jeffrey.chu@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Ivium Technologies uses the FTDI VID with custom PIDs for their line of
electrochemical interfaces and the PalmSens they developed for PalmSens
BV.
Signed-off-by: Robert Delien <robert@delien.nl>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Do not drop packet when CSeq is 0 as 0 is also a valid value for CSeq.
simple_strtoul() will return 0 either when all digits are 0
or if there are no digits at all. Therefore when simple_strtoul()
returns 0 we check if first character is digit 0 or not.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The device has four interfaces; the three serial ports ought to be
handled by this driver:
00 Diagnostic interface serial port
01 NMEA device serial port
02 Mass storage (sd card)
03 Modem serial port
The other product ids listed in the Windows driver are present already.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
If we find a matching element that is inactive with no descendants, we
jump to the found label, then crash because of nul-dereference on the
left branch.
Fix this by checking that the element is active and not an interval end
and skipping the logic that only applies to the tree iteration.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Tested-by: Anders K. Pedersen <akp@akp.dk>
A recent commit (inadvertently?) changed how failed probe of a gpmc
child node was handled. Instead of proceeding with setting up any other
children as before, a single error now aborts the whole process.
This change broke networking on some Overo boards due to probe failing
for an unrelated nand node. This second issue should obviously be
fixed, but let's restore the old behaviour of allowing child-node
probe to fail to avoid further similar breakage on other systems.
Fixes: d2d00862df ("memory: omap-gpmc: Support general purpose input
for WAITPINs")
Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Roger Quadros <rogerq@ti.com>
The USB-DMAC's interruption happens even if the CHCR.DE is not set to 1
because CHCR.NULLE is set to 1. So, this driver should call
usb_dmac_isr_transfer_end() if the DE bit is set to 1 only. Otherwise,
the desc is possible to be NULL in the usb_dmac_isr_transfer_end().
Fixes: 0c1c8ff32f ("dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver)
Cc: <stable@vger.kernel.org> # v4.1+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Commit 96d1327ac2 ("netfilter: h323: Use mod_timer instead of
set_expect_timeout") just simplify the source codes
if (!del_timer(&exp->timeout))
return 0;
add_timer(&exp->timeout);
to mod_timer(&exp->timeout, jiffies + info->timeout * HZ);
This is not correct, and introduce a race codition:
CPU0 CPU1
- timer expire
process_rcf expectation_timed_out
lock(exp_lock) -
find_exp waiting exp_lock...
re-activate timer!! waiting exp_lock...
unlock(exp_lock) lock(exp_lock)
- unlink expect
- free(expect)
- unlock(exp_lock)
So when the timer expires again, we will access the memory that
was already freed.
Replace mod_timer with mod_timer_pending here to fix this problem.
Fixes: 96d1327ac2 ("netfilter: h323: Use mod_timer instead of set_expect_timeout")
Cc: Gao Feng <fgao@ikuai8.com>
Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This reverts commit 3d5fdff46c.
Ben Hutchings pointed out that the commit isn't safe since it assumes
that the structure used by the driver is iw_point, when in fact there's
no way to know about that.
Fortunately, the only driver in the tree that ever runs this code path
is the wilc1000 staging driver, so it doesn't really matter.
Clearly I should have investigated this better before applying, sorry.
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Cc: stable@vger.kernel.org [though I guess it doesn't matter much]
Fixes: 3d5fdff46c ("wext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A few fixes for amdgpu and ttm for 4.8
- fix a ttm regression caused by the new pipelining code
- fixes for mullins on amdgpu
- updated golden settings for amdgpu
* 'drm-next-4.8' of git://people.freedesktop.org/~agd5f/linux:
drm/ttm: Wait for a BO to become idle before unbinding it from GTT
drm/amdgpu: update golden setting of polaris10
drm/amdgpu: update golden setting of stoney
drm/amdgpu: update golden setting of polaris11
drm/amdgpu: update golden setting of carrizo
drm/amdgpu: update golden setting of iceland
drm/amd/amdgpu: change pptable output format from ASCII to binary
drm/amdgpu/ci: add mullins to default case for smc ucode
drm/amdgpu/gmc7: add missing mullins case
Commit 817820b022 ("powerpc/iommu: Support "hybrid" iommu/direct DMA
ops for coherent_mask < dma_mask) adds a check of coherent_dma_mask for
dma allocations.
Unfortunately current PASemi code does not set this value for the DMA
engine, which ends up with the default value of 0xffffffff, the result
is on a PASemi system with >2Gb ram and iommu enabled the the onboard
ethernet stops working due to an inability to allocate memory. Add an
initialisation to pci_dma_dev_setup_pasemi().
Signed-off-by: Darren Stevens <darren@stevens-zone.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
3 intel fixes.
* tag 'drm-intel-next-fixes-2016-08-05' of git://anongit.freedesktop.org/drm-intel:
drm/i915/fbdev: Check for the framebuffer before use
drm/i915: Never fully mask the the EI up rps interrupt on SNB/IVB
drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL
The conversion of the rcar-du driver from the I2C slave encoder to the
DRM bridge API left the HDMI encoder's bridge pointer NULL, preventing
the bridge from being handled automatically by the DRM core. Fix it.
Fixes: 1d926114d8 ("drm: rcar-du: Remove i2c slave encoder interface for hdmi encoder")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
On Intel Xeon Phi Knights Landing processor family the channels of the
memory controller have untypical arrangement - MC0 is mapped to CH3,4,5
and MC1 is mapped to CH0,1,2. This causes the EDAC driver to report the
channel name incorrectly.
We missed this change earlier, so the code already contains similar
comment, but the translation function is incorrect.
Without this patch:
errors in DIMM_A and DIMM_D were reported in DIMM_D
errors in DIMM_B and DIMM_E were reported in DIMM_E
errors in DIMM_C and DIMM_F were reported in DIMM_F
Correct this.
Hubert Chrzaniuk:
- rebased to 4.8
- comments and code cleanup
Fixes: d0cdf90031 ("sb_edac: Add Knights Landing (Xeon Phi gen 2) support")
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Hubert Chrzaniuk <hubert.chrzaniuk@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: lukasz.anaczkowski@intel.com
Cc: lukasz.odzioba@intel.com
Cc: mchehab@kernel.org
Cc: <stable@vger.kernel.org> # v4.5..
Link: http://lkml.kernel.org/r/1469231089-22837-1-git-send-email-lukasz.odzioba@intel.com
Signed-off-by: Lukasz Odzioba <lukasz.odzioba@intel.com>
[ Boris: Simplify a bit by removing char mc. ]
Signed-off-by: Borislav Petkov <bp@suse.de>
The driver allocates the mutex but not initialize it.
Use mutex_init() on it to initialize it correctly.
This is detected by Coccinelle semantic patch.
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
When multiple thermal zones are bound to the same cooling device, multiple
kernel threads may want to update the cooling device state by calling
thermal_cdev_update(). Having cdev not protected by a mutex can lead to a race
condition. Consider the following situation with two kernel threads k1 and k2:
Thread k1 Thread k2
||
|| call thermal_cdev_update()
|| ...
|| set_cur_state(cdev, target);
call power_actor_set_power() ||
... ||
instance->target = state; ||
cdev->updated = false; ||
|| cdev->updated = true;
|| // completes execution
call thermal_cdev_update() ||
// cdev->updated == true ||
return; ||
\/
time
k2 has already looped through the thermal instances looking for the deepest
cooling device state and is preempted right before setting cdev->updated to
true. Now, k1 runs, modifies the thermal instance state and sets cdev->updated
to false. Then, k1 is preempted and k2 continues the execution by setting
cdev->updated to true, therefore preventing k1 from performing the update.
Notice that this is not an issue if k2 looks at the instance->target modified by
k1 "after" it is assigned by k1. In fact, in this case the update will happen
anyway and k1 can safely return immediately from thermal_cdev_update().
This may lead to a situation where a thermal governor never updates the cooling
device. For example, this is the case for the step_wise governor: when calling
the function thermal_zone_trip_update(), the governor may always get a new state
equal to the old one (which, however, wasn't notified to the cooling device) and
will therefore skip the update.
CC: Zhang Rui <rui.zhang@intel.com>
CC: Eduardo Valentin <edubezval@gmail.com>
CC: Peter Feuerer <peter@piie.net>
Reported-by: Toby Huang <toby.huang@arm.com>
Signed-off-by: Michele Di Giorgio <michele.digiorgio@arm.com>
Reviewed-by: Javi Merino <javi.merino@arm.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Added suspend/resume callback to disable/enable PCH thermal sensor
respectively. If the sensor is enabled by the BIOS, then the sensor status
will not be changed during suspend/resume.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
On no-MMU systems the application a5 register can be overwitten with the
address of the process data segment when processing application signals.
For flat format applications compiled with full absolute relocation this
effectively corrupts the a5 register on signal processing - and this very
quickly leads to process crash and often takes out the whole system with
a panic as well.
This has no effect on flat format applications compiled with the more
common PIC methods (such as -msep-data). These format applications reserve
a5 for the pointer to the data segment anyway - so it doesn't change it.
A long time ago the a5 register was used in the code packed into the user
stack to enable signal return processing. And so it had to be restored on
end of signal cleanup processing back to the original a5 user value. This
was historically done by saving away a5 in the sigcontext structure. At
some point (a long time back it seems) the a5 restore process was changed
and it was hard coded to put the user data segment address directly into a5.
Which is ok for the common PIC compiled application case, but breaks the
full relocation application code.
We no longer use this type of signal handling mechanism and so we don't
need to do anything special to save and restore a5 at all now. So remove the
code that hard codes a5 to the address of the user data segment.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Johannes Berg says:
====================
First set of fixes for the current cycle:
* fix 80+80 bandwidth warning
* fix powersave with mac80211 TXQ implementation
* use correct way to free SKBs from multicast buffering
* mesh: fix operation ordering to work with all drivers
* mesh: end service period even when peer goes away
* mesh: correct HT opmode validity checks
* pass hw pointer from mac80211 to driver in TPT method,
fixing a bug (in a bit the wrong way, but that's what
we have right now)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
increase test coverage to check previously missing 'update when full'
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The introduction of pre-allocated hash elements inadvertently broke
the behavior of bpf hash maps where users expected to call
bpf_map_update_elem() without considering that the map can be full.
Some programs do:
old_value = bpf_map_lookup_elem(map, key);
if (old_value) {
... prepare new_value on stack ...
bpf_map_update_elem(map, key, new_value);
}
Before pre-alloc the update() for existing element would work even
in 'map full' condition. Restore this behavior.
The above program could have updated old_value in place instead of
update() which would be faster and most programs use that approach,
but sometimes the values are large and the programs use update()
helper to do atomic replacement of the element.
Note we cannot simply update element's value in-place like percpu
hash map does and have to allocate extra num_possible_cpu elements
and use this extra reserve when the map is full.
Fixes: 6c90598174 ("bpf: pre-allocate hash map elements")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 09ca4c9b59 (cpufreq: powernv: Replacing pstate_id with
frequency table index) changes calc_global_pstate() to use
cpufreq_table index instead of pstate_id.
But in gpstate_timer_handler(), pstate_id was being passed instead
of cpufreq_table index, which caused index_to_pstate() to access
out of bound indices, leading to this crash.
Adding sanity check for index and pstate, to ensure only valid pstate
and index values are returned.
Call Trace:
[c00000078d66b130] [c00000000011d224] __free_irq+0x234/0x360
(unreliable)
[c00000078d66b1c0] [c00000000011d44c] free_irq+0x6c/0xa0
[c00000078d66b1f0] [c00000000006c4f8] opal_event_shutdown+0x88/0xd0
[c00000078d66b230] [c000000000067a4c] opal_shutdown+0x1c/0x90
[c00000078d66b260] [c000000000063a00] pnv_shutdown+0x20/0x40
[c00000078d66b280] [c000000000021538] machine_restart+0x38/0x90
[c0000000078d66b310] [c000000000965ea0] panic+0x284/0x300
[c00000078d66b3a0] [c00000000001f508] die+0x388/0x450
[c00000078d66b430] [c000000000045a50] bad_page_fault+0xd0/0x140
[c00000078d66b4a0] [c000000000008964] handle_page_fault+0x2c/0x30
interrupt: 300 at gpstate_timer_handler+0x150/0x260
LR = gpstate_timer_handler+0x130/0x260
[c00000078d66b7f0] [c000000000132b58] call_timer_fn+0x58/0x1c0
[c00000078d66b880] [c000000000132e20] expire_timers+0x130/0x1d0
[c00000078d66b8f0] [c000000000133068] run_timer_softirq+0x1a8/0x230
[c00000078d66b980] [c0000000000b535c] __do_softirq+0x18c/0x400
[c00000078d66ba70] [c0000000000b5828] irq_exit+0xc8/0x100
[c00000078d66ba90] [c00000000001e214] timer_interrupt+0xa4/0xe0
[c00000078d66bac0] [c0000000000027d0] decrementer_common+0x150/0x180
interrupt: 901 at arch_local_irq_restore+0x74/0x90
0] [c000000000106b34] call_cpuidle+0x44/0x90
[c00000078d66be50] [c00000000010708c] cpu_startup_entry+0x38c/0x460
[c00000078d66bf20] [c00000000003d930] start_secondary+0x330/0x380
[c00000078d66bf90] [c000000000008e6c] start_secondary_prolog+0x10/0x14
Fixes: 09ca4c9b59 (cpufreq: powernv: Replacing pstate_id with frequency table index)
Reported-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Signed-off-by: Akshay Adiga <akshay.adiga@linux.vnet.ibm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
After array enters in faulty state (e.g. number of failed drives
becomes more then accepted for raid5 level) it sets error flags
(one of this flags is MD_CHANGE_PENDING). For internal metadata
arrays MD_CHANGE_PENDING cleared into md_update_sb, but not for
external metadata arrays. MD_CHANGE_PENDING flag set prevents to
finish all new or non-finished IOs to array and hold them in
pending state. In some cases this can leads to deadlock situation.
For example, we have faulty array (2 of 4 drives failed) and
udev handle array state changes and blkid started (or other
userspace application that used array to read/write) but unable
to finish reads due to IO hold. At the same time we unable to get
exclusive access to array (to stop array in our case) because
another external application still use this array.
Fix makes possible to return IO with errors immediately.
So external application can finish working with array and
give exclusive access to other applications to perform
required management actions with array.
Signed-off-by: Alexey Obitotskiy <aleksey.obitotskiy@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
Changing the location changes a lot of things. Holding the lock to avoid race.
This makes the .quiesce called with mddev lock hold too.
Acked-by: NeilBrown <neilb@suse.com>
Signed-off-by: Shaohua Li <shli@fb.com>
On 32-bit (e.g. with m68k-linux-gnu-gcc-4.1):
drivers/net/dsa/b53/b53_common.c: In function ‘b53_arl_read’:
drivers/net/dsa/b53/b53_common.c:1072: warning: integer constant is too large for ‘long’ type
Fixes: 1da6df85c6 ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Inside the kafs filesystem it is possible to occasionally have a call
processed and terminated before we've had a chance to check whether we need
to clean up the rx queue for that call because afs_send_simple_reply() ends
the call when it is done, but this is done in a workqueue item that might
happen to run to completion before afs_deliver_to_call() completes.
Further, it is possible for rxrpc_kernel_send_data() to be called to send a
reply before the last request-phase data skb is released. The rxrpc skb
destructor is where the ACK processing is done and the call state is
advanced upon release of the last skb. ACK generation is also deferred to
a work item because it's possible that the skb destructor is not called in
a context where kernel_sendmsg() can be invoked.
To this end, the following changes are made:
(1) kernel_rxrpc_data_consumed() is added. This should be called whenever
an skb is emptied so as to crank the ACK and call states. This does
not release the skb, however. kernel_rxrpc_free_skb() must now be
called to achieve that. These together replace
rxrpc_kernel_data_delivered().
(2) kernel_rxrpc_data_consumed() is wrapped by afs_data_consumed().
This makes afs_deliver_to_call() easier to work as the skb can simply
be discarded unconditionally here without trying to work out what the
return value of the ->deliver() function means.
The ->deliver() functions can, via afs_data_complete(),
afs_transfer_reply() and afs_extract_data() mark that an skb has been
consumed (thereby cranking the state) without the need to
conditionally free the skb to make sure the state is correct on an
incoming call for when the call processor tries to send the reply.
(3) rxrpc_recvmsg() now has to call kernel_rxrpc_data_consumed() when it
has finished with a packet and MSG_PEEK isn't set.
(4) rxrpc_packet_destructor() no longer calls rxrpc_hard_ACK_data().
Because of this, we no longer need to clear the destructor and put the
call before we free the skb in cases where we don't want the ACK/call
state to be cranked.
(5) The ->deliver() call-type callbacks are made to return -EAGAIN rather
than 0 if they expect more data (afs_extract_data() returns -EAGAIN to
the delivery function already), and the caller is now responsible for
producing an abort if that was the last packet.
(6) There are many bits of unmarshalling code where:
ret = afs_extract_data(call, skb, last, ...);
switch (ret) {
case 0: break;
case -EAGAIN: return 0;
default: return ret;
}
is to be found. As -EAGAIN can now be passed back to the caller, we
now just return if ret < 0:
ret = afs_extract_data(call, skb, last, ...);
if (ret < 0)
return ret;
(7) Checks for trailing data and empty final data packets has been
consolidated as afs_data_complete(). So:
if (skb->len > 0)
return -EBADMSG;
if (!last)
return 0;
becomes:
ret = afs_data_complete(call, skb, last);
if (ret < 0)
return ret;
(8) afs_transfer_reply() now checks the amount of data it has against the
amount of data desired and the amount of data in the skb and returns
an error to induce an abort if we don't get exactly what we want.
Without these changes, the following oops can occasionally be observed,
particularly if some printks are inserted into the delivery path:
general protection fault: 0000 [#1] SMP
Modules linked in: kafs(E) af_rxrpc(E) [last unloaded: af_rxrpc]
CPU: 0 PID: 1305 Comm: kworker/u8:3 Tainted: G E 4.7.0-fsdevel+ #1303
Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014
Workqueue: kafsd afs_async_workfn [kafs]
task: ffff88040be041c0 ti: ffff88040c070000 task.ti: ffff88040c070000
RIP: 0010:[<ffffffff8108fd3c>] [<ffffffff8108fd3c>] __lock_acquire+0xcf/0x15a1
RSP: 0018:ffff88040c073bc0 EFLAGS: 00010002
RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000000 RCX: ffff88040d29a710
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88040d29a710
RBP: ffff88040c073c70 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: ffff88040be041c0 R15: ffffffff814c928f
FS: 0000000000000000(0000) GS:ffff88041fa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fa4595f4750 CR3: 0000000001c14000 CR4: 00000000001406f0
Stack:
0000000000000006 000000000be04930 0000000000000000 ffff880400000000
ffff880400000000 ffffffff8108f847 ffff88040be041c0 ffffffff81050446
ffff8803fc08a920 ffff8803fc08a958 ffff88040be041c0 ffff88040c073c38
Call Trace:
[<ffffffff8108f847>] ? mark_held_locks+0x5e/0x74
[<ffffffff81050446>] ? __local_bh_enable_ip+0x9b/0xa1
[<ffffffff8108f9ca>] ? trace_hardirqs_on_caller+0x16d/0x189
[<ffffffff810915f4>] lock_acquire+0x122/0x1b6
[<ffffffff810915f4>] ? lock_acquire+0x122/0x1b6
[<ffffffff814c928f>] ? skb_dequeue+0x18/0x61
[<ffffffff81609dbf>] _raw_spin_lock_irqsave+0x35/0x49
[<ffffffff814c928f>] ? skb_dequeue+0x18/0x61
[<ffffffff814c928f>] skb_dequeue+0x18/0x61
[<ffffffffa009aa92>] afs_deliver_to_call+0x344/0x39d [kafs]
[<ffffffffa009ab37>] afs_process_async_call+0x4c/0xd5 [kafs]
[<ffffffffa0099e9c>] afs_async_workfn+0xe/0x10 [kafs]
[<ffffffff81063a3a>] process_one_work+0x29d/0x57c
[<ffffffff81064ac2>] worker_thread+0x24a/0x385
[<ffffffff81064878>] ? rescuer_thread+0x2d0/0x2d0
[<ffffffff810696f5>] kthread+0xf3/0xfb
[<ffffffff8160a6ff>] ret_from_fork+0x1f/0x40
[<ffffffff81069602>] ? kthread_create_on_node+0x1cf/0x1cf
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit a94efbd7cc ("ethernet: arc: emac_main: add missing of_node_put
after calling of_parse_phandle") added missing of_node_put after calling
of_parse_phandle, but missing the devm_ioremap_resource() error handling
case.
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net_device->ndo_set_rx_headroom (introduced in
871b642ade) says
"Setting a negtaive value reset the rx headroom
to the default value".
It seems that the OVS implementation in
3a927bc7cf overlooked this and sets
dev->needed_headroom unconditionally.
This doesn't have an immediate effect, but can mess up later
LL_RESERVED_SPACE calculations, such as done in
net/ipv6/mcast.c:mld_newpack. For reference, this issue was found
from a skb_panic raised there after the length calculations had given
the wrong result.
Note the other current users of this interface
(drivers/net/tun.c:tun_set_headroom and
drivers/net/veth.c:veth_set_rx_headroom) are both checking this
correctly thus need no modification.
Thanks to Ben for some pointers from the crash dumps!
Cc: Benjamin Poirier <bpoirier@suse.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1361414
Signed-off-by: Ian Wienand <iwienand@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We don't want to miss a lease period renewal due to the TCP connection
failing to reconnect in a timely fashion. To ensure this doesn't happen,
cap the reconnection timer so that we retry the connection attempt
at least every 1/2 lease period.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Make a helper function nfs4_set_lease_period() and have
nfs41_setup_state_renewal() and nfs4_do_fsinfo() use it.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Fixes hangs under memory pressure, e.g. running the piglit test
tex3d-maxsize concurrently with other tests.
Fixes: 17d33bc9d6 ("drm/ttm: drop waiting for idle in ttm_bo_evict.")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When the connect attempt fails and backs off, we should start the clock
at the last connection attempt, not time at which we queue up the
reconnect job.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
We should handle those errors in the same way we handle the other
stateid errors: by invalidating the faulty layout stateid.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
If the net.ipv6.conf.*.use_temp_addr sysctl is set to '2',
then TCP connections over IPv6 will prefer a 'private' source
address.
These eventually expire and become invalid, typically after a week,
but the time is configurable.
When the local address becomes invalid the client will not be able to
receive replies from the server. Eventually the connection will timeout
or break and a new connection will be established, but this can take
half an hour (typically TCP connection break time).
RFC 4941, which describes private IPv6 addresses, acknowledges that some
applications might not work well with them and that the application may
explicitly a request non-temporary (i.e. "public") address.
I believe this is correct for SUNRPC clients. Without this change, a
client will occasionally experience a long delay if private addresses
have been enabled.
The privacy offered by private addresses is of little value for an NFS
server which requires client authentication.
For NFSv3 this will often not be a problem because idle connections are
closed after 5 minutes. For NFSv4 connections never go idle due to the
period RENEW (or equivalent) request.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
It's possible to have simultaneous upcalls for the same UIDs but
different GSS service. In that case, we need to allow for the
upcall to gssd to proceed so that not the same context is used
by two different GSS services. Some servers lock the use of context
to the GSS service.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Cc: stable@vger.kernel.org # v3.9+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The variable is added to allow the driver an easy access to
it's own hw->priv when the op is invoked.
This fixes a crash in wlcore because it was relying on a
station pointer that wasn't initialized yet. It's the wrong
way to fix the crash, but it solves the problem for now and
it does make sense to have the hw pointer here.
Signed-off-by: Maxim Altshul <maxim.altshul@ti.com>
[rewrite commit message, fix indentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Previously, NL80211_MESHCONF_HT_OPMODE validation rejected correct
flag combinations, e.g. IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED |
IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT.
Doing just a range-check allows setting flags that don't exist (0x8)
and invalid flag combinations.
Implements some checks based on IEEE 802.11 2012 8.4.2.59 "HT
Operation element".
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
[reword commit message, simplify a bit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If QoS frame with EOSP (end of service period) subfield=1 sent by local
peer was not acked by remote peer, local peer did not end the MPSP. This
prevents local peer from going to DOZE state. And if the remote peer
goes away without closing connection, local peer continues AWAKE state
and wastes battery.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Acked-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The code currently assumes that buffered multicast PS frames don't have
a pending ACK frame for tx status reporting.
However, hostapd sends a broadcast deauth frame on teardown for which tx
status is requested. This can lead to the "Have pending ack frames"
warning on module reload.
Fix this by using ieee80211_free_txskb/ieee80211_purge_tx_queue.
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The voltage ranges listed here are wrong. The pma8084 pldo
supports three different overlapping voltage ranges with
differing step sizes and the pma8084 ftsmps supports two. These
ranges can be seen in the "native" spmi regulator driver
(qcom_spmi-regulator.c) at pldo_ranges[] and ftsmps_ranges[]
respectively. Port these ranges over to the RPM SMD regulator
driver so that we list the appropriate set of supported voltages
on these types of regulators.
Fixes: ee01d0c91e ("regulator: qcom-smd: Add support for PMA8084")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The voltage ranges listed here are wrong. The correct ranges can
be seen in the "native" spmi regulator driver
qcom_spmi-regulator.c at pldo_ranges[], ftsmps_ranges[] and
boost_ranges[] for the pldo, ftsmps, and boost type regulators.
Port these ranges over to the RPM SMD regulator driver so that we
list the appropriate set of supported voltages on pldos.
Doing this allows us to specify a voltage like 3075000 for l24,
whereas before that wasn't a supported voltage.
Fixes: da65e367b6 ("regulator: Regulator driver for the Qualcomm RPM")
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The conversion from a look-up table to a calculation for clock generator
parameters forgot to take into account that BRDV x 1/1 is valid only if
BRPS is x 1/1 or x 1/2, leading to undefined behavior (e.g. arbitrary
clock rates).
This limitation is documented for the MSIOF module in all supported
SH/R-Mobile and R-Car Gen2/Gen3 ARM SoCs.
Tested on r8a7791/koelsch and r8a7795/salvator-x.
Fixes: 65d5665bb2 ("spi: sh-msiof: Update calculation of frequency dividing")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
Previously code defaulted to 32 BCLKS per WCLK which meant 24 and
32 bit DAI formats would not work properly. This patch fixes the
issue by defaulting to 64 BCLKs per WCLK.
Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The patch is to fix the static check error as the following.
The patch commit b50455fab4 ("ASoC: nau8825: cross talk suppression
measurement function") from Jun 7, 2016, leads to the following
static checker warning:
sound/soc/codecs/nau8825.c:265 nau8825_sema_acquire()
warn: 'sem:&nau8825->xtalk_sem' is sometimes locked here and
sometimes unlocked.
The semaphone acquire function has return value, and some callers
can do error handling when lock fails.
Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In chromium, the following steps will make codec function fail.
\1. plug in headphones, Play music
\2. run "powerd_dbus_suspend"
\3. resume from S3
After resume, the jack detection will restart and make configuration
for the headset. Meanwhile, the playback prepares and starts to work.
The two sequences will conflict and make wrong register configuration.
Originally, the driver adds protection for the case when it finds
the playback is active. But the "powerd_dbus_suspend" command will
close the pcm stream before suspend. Therefore, the driver can't
detect the playback after resume, and the protection not works.
For the issue, the driver raises protection every time after resume.
The protection will release after jack detection and configuration
completes, and then the playback just will goes on.
Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When searching for a suitable node that should be used for inserting a new
register, which does not fall within the range of any existing node, we not
only looks for nodes which are directly adjacent to the new register, but
for nodes within a certain proximity. This is done to avoid creating lots
of small nodes with just a few registers spacing in between, which would
increase memory usage as well as tree traversal time.
This means there might be multiple node candidates which fall within the
proximity range of the new register. If we choose the first node we
encounter, under certain register insertion patterns it is possible to end
up with overlapping ranges. This will break order in the rbtree and can
cause the cached register value to become corrupted.
E.g. take the simplified example where the proximity range is 2 and the
register insertion sequence is 1, 4, 2, 3, 5.
* Insert of register 1 creates a new node, this is the root of the rbtree
* Insert of register 4 creates a new node, which is inserted to the right
of the root.
* Insert of register 2 gets inserted to the first node
* Insert of register 3 gets inserted to the first node
* Insert of register 5 also gets inserted into the first node since
this is the first node encountered and it is within the proximity range.
Now there are two overlapping nodes.
To avoid this always choose the node that is closest to the new register.
This will ensure that nodes will not overlap. The tree traversal is still
done as a binary search, we just don't stop at the first node found. So the
complexity of the algorithm stays within the same order.
Ideally if a new register is in the range of two adjacent blocks those
blocks should be merged, but that is a much more invasive change and left
for later.
The issue was initially introduced in commit 472fdec738 ("regmap: rbtree:
Reduce number of nodes, take 2"), but became much more exposed by commit
6399aea629 ("regmap: rbtree: When adding a reg do a bsearch for target
node") which changed the order in which nodes are looked-up.
Fixes: 6399aea629 ("regmap: rbtree: When adding a reg do a bsearch for target node")
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
When we reset or reconnect to a controller, we are cancelling the
async event handler so we can safely re-establish resources, but we
need to remember to start it again when we successfully reconnect.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The host is allowed to issue identify as many times
as it wants, we need to stay consistent when reporting
the serial number for a given controller.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Under extreme conditions this might cause data corruptions. By doing that
we we repost the buffer and then post this buffer for the device to send.
If we happen to use shared receive queues the device might write to the
buffer before it sends it (there is no ordering between send and recv
queues). Without SRQs we probably won't get that if the host doesn't
mis-behave and send more than we allowed it, but relying on that is not
really a good idea.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
When configuring a device attached listener, we may
see device removal events. In this case we return a
non-zero return code from the cm event handler which
implicitly destroys the cm_id. It is possible that in
the future the user will remove this listener and by
that trigger a second call to rdma_destroy_id on an
already destroyed cm_id -> BUG.
In addition, when a queue bound (active session) cm_id
generates a DEVICE_REMOVAL event we must guarantee all
resources are cleaned up by the time we return from the
event handler.
Introduce nvmet_rdma_device_removal which addresses
(or at least attempts to) both scenarios.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
There is no "pclk" alias in the s3c2440 clk driver for "soc-audio"
device so related clk_get() fails, which prevents any operation
of the S3C24XX_UDA134X sound card.
Instead we get the clock on behalf of the I2S device, i.e. we use
the I2S block gate clock which has PCLK is its parent clock.
Without this patch there is an error like:
s3c24xx_uda134x_startup cannot get pclk
ASoC: UDA134X startup failed: -2
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Manish Chopra says:
====================
qlcnic: bug fixes
This series fixes a data structure corruption bug in
VF's async mailbox commands handling and an issue realted
to napi poll budget in the driver.
Please consider applying this series to "net"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Driver modifies the supplied NAPI budget in qlcnic_83xx_msix_tx_poll()
function. Instead, it should use the budget as it is.
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes a data structure corruption bug in the SRIOV VF mailbox
handler code. While handling mailbox commands from the atomic context,
driver is accessing and updating qlcnic_async_work_list_struct entry fields
in the async work list. These fields could be concurrently accessed by the
work function resulting in data corruption.
This patch restructures async mbx command handling by using a separate
async command list instead of using a list of work_struct structures.
A single work_struct is used to schedule and handle the async commands
with proper locking mechanism.
Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Siva Reddy Kallam says:
====================
tg3: Disallow 0 rx coalesce time and correctly report RSS queues in tg3_get_rxnfc
First patch:
Diasllow rx coalescing time to be 0
Second patch:
Report the correct number of RSS queues through tg3_get_rxnfc
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch remove the wrong substraction from info->data in
tg3_get_rxnfc function. Without this patch, the number of RSS
queues reported is less by one.
Reported-by: Michal Soltys <soltys@ziu.info>
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the rx coalescing time is 0, interrupts
are not generated from the controller and rx path hangs.
To avoid this rx hang, updating the driver to not allow
rx coalescing time to be 0.
Signed-off-by: Satish Baddipadige <satish.baddipadige@broadcom.com>
Signed-off-by: Siva Reddy Kallam <siva.kallam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Using per-register incrementing ID can lead to
find_good_pkt_pointers() confusing registers which
have completely different values. Consider example:
0: (bf) r6 = r1
1: (61) r8 = *(u32 *)(r6 +76)
2: (61) r0 = *(u32 *)(r6 +80)
3: (bf) r7 = r8
4: (07) r8 += 32
5: (2d) if r8 > r0 goto pc+9
R0=pkt_end R1=ctx R6=ctx R7=pkt(id=0,off=0,r=32) R8=pkt(id=0,off=32,r=32) R10=fp
6: (bf) r8 = r7
7: (bf) r9 = r7
8: (71) r1 = *(u8 *)(r7 +0)
9: (0f) r8 += r1
10: (71) r1 = *(u8 *)(r7 +1)
11: (0f) r9 += r1
12: (07) r8 += 32
13: (2d) if r8 > r0 goto pc+1
R0=pkt_end R1=inv56 R6=ctx R7=pkt(id=0,off=0,r=32) R8=pkt(id=1,off=32,r=32) R9=pkt(id=1,off=0,r=32) R10=fp
14: (71) r1 = *(u8 *)(r9 +16)
15: (b7) r7 = 0
16: (bf) r0 = r7
17: (95) exit
We need to get a UNKNOWN_VALUE with imm to force id
generation so lines 0-5 make r7 a valid packet pointer.
We then read two different bytes from the packet and
add them to copies of the constructed packet pointer.
r8 (line 9) and r9 (line 11) will get the same id of 1,
independently. When either of them is validated (line
13) - find_good_pkt_pointers() will also mark the other
as safe. This leads to access on line 14 being mistakenly
considered safe.
Fixes: 969bf05eb3 ("bpf: direct packet access")
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Building with -Wmaybe-uninitialized shows a potential use of
an uninitialized variable:
drivers/net/ethernet/apm/xgene/xgene_enet_hw.c: In function 'xgene_enet_phy_connect':
drivers/net/ethernet/apm/xgene/xgene_enet_hw.c:802:23: warning: 'phy_dev' may be used uninitialized in this function [-Wmaybe-uninitialized]
Although the compiler correctly identified this based on the function,
the current code is still safe as long dev->of_node is non-NULL
for the case of CONFIG_ACPI=n, which is currently the case.
The warning is now disabled by default, but still appears when
building with W=1, and other build test tools should be able to
detect it as well. Adding an #else clause here makes the code
more robust and makes it clear to the compiler that this cannot
happen.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 8089a96f60 ("drivers: net: xgene: Add backward compatibility")
Signed-off-by: David S. Miller <davem@davemloft.net>
ovs_ct_find_existing() issues a warning if an existing conntrack entry
classified as IP_CT_NEW is found, with the premise that this should
not happen. However, a newly confirmed, non-expected conntrack entry
remains IP_CT_NEW as long as no reply direction traffic is seen. This
has resulted into somewhat confusing kernel log messages. This patch
removes this check and warning.
Fixes: 289f2253 ("openvswitch: Find existing conntrack entry after upcall.")
Suggested-by: Joe Stringer <joe@ovn.org>
Signed-off-by: Jarno Rajahalme <jarno@ovn.org>
Acked-by: Joe Stringer <joe@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
simple-card-utils might be used as module, but MODULE_xxx()
information was missed. This patch adds it.
Otherwise, we will have below error, and can't use it.
Specil thanks to Kevin.
> insmod simple-card-utils.ko
simple_card_utils: module license 'unspecified' taints kernel.
Disabling lock debugging due to kernel taint
simple_card_utils: Unknown symbol snd_soc_of_parse_daifmt (err 0)
simple_card_utils: Unknown symbol snd_soc_of_parse_card_name (err 0)
insmod: can't insert 'simple-card-utils.ko': \
unknown symbol in module, or unknown parameter
Reported-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Relying on ctrl state in nvme_rdma_shutdown_ctrl is wrong because
it will never be NVME_CTRL_LIVE (delete_ctrl or reset_ctrl invoked it).
Instead, check that the admin queue is connected. Note that it is safe
because we can never see a copmeting thread trying to destroy the admin
queue (reset or delete controller).
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
nvme_uninit_ctrl already does that for us. Note that we
reordered nvme_loop_shutdown_ctrl with nvme_uninit_ctrl
but its safe because we want controller uninit to happen
before we shutdown the transport resources.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
If we wait until we free the controller (free_ctrl) we might
lose our rdma device without any notification while we still
have open resources (tags mrs and dma mappings).
Instead, destroy the tags with their rdma resources once we
delete the device and not when freeing it.
Note that we don't do that in nvme_rdma_shutdown_ctrl because
controller reset uses it as well and we want to give active I/O
a chance to complete successfully.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
nvme_uninit_ctrl already does that for us. Note that we reordered
nvme_rdma_shutdown_ctrl and nvme_uninit_ctrl, this is perfectly
fine because we actually want ctrl uninit (aen, scan cancellation
and namespaces removal) to happen before we shutdown the rdma
resources.
Also, centralize the deletion work and the dead controller removal
work code duplication into __nvme_rdma_shutdown_ctrl that accepts
a shutdown boolean.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Device removal sequence may have crashed because the
controller (and admin queue space) was freed before
we destroyed the admin queue resources. Thus we
want to destroy the admin queue and only then queue
controller deletion and wait for it to complete.
More specifically we:
1. own the controller deletion (make sure we are not
competing with another deletion).
2. get rid of inflight reconnects if exists (which
also destroy and create queues).
3. destroy the queue.
4. safely queue controller deletion (and wait for it
to complete).
Reported-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
On an ordered target shutdown, the target can send a AEN on a namespace
removal, this will trigger the host to queue ns-list query. The shutdown
will trigger error recovery which will attepmt periodic reconnect.
We can hit a race where the ns rescanning fails (error recovery kicked
in and we're not connected) causing removing all the namespaces and when
we reconnect we won't see any namespaces for this controller.
So, queue a namespace rescan after we successfully reconnected to the target.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Zero out the full nvme_rdma_cm_req structure before sending it.
Otherwise we end up leaking kernel memory in the reserved field, which
might break forward compatibility in the future.
Signed-off-by: Roland Dreier <roland@purestorage.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
No longer used as of commit 5846a3c268 ("btrfs: qgroup: Fix a race in
delayed_ref which leads to abort trans").
Signed-off-by: Filipe Manana <fdmanana@suse.com>
The patch that this was preparing for made it into neither v4.7 nor
v4.8, so we should back this out as well to avoid the opposite
warning:
arch/arm/configs/aspeed_g5_defconfig:62:warning: symbol value '1' invalid for PRINTK_TIME
arch/arm/configs/aspeed_g4_defconfig:61:warning: symbol value '1' invalid for PRINTK_TIME
Sorry for not catching this earlier.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 0ef659a300 ("ARM: aspeed: adapt defconfigs for new CONFIG_PRINTK_TIME")
Cc: stable@vger.kernel.org # v4.7
Some drivers (e.g. wl18xx) expect that the last stage in the
de-initialization process will be stopping the beacons, similar to AP flow.
Update ieee80211_stop_mesh() flow accordingly.
As peers can be removed dynamically, this would not impact other drivers.
Tested also on Ralink RT3572 chipset.
Signed-off-by: Maital Hahn <maitalm@ti.com>
Signed-off-by: Yaniv Machani <yanivma@ti.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For rcar-gen2, we build the SMP files even for UP configurations,
and that just broke:
arch/arm/mach-shmobile/built-in.o: In function `shmobile_smp_init_fallback_ops':
pm-rcar-gen2.c:(.init.text+0x40c): undefined reference to `platform_can_secondary_boot'
This adds an compile-time check before the call to platform_can_secondary_boot,
turning the function into an empty stub for UP configurations.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: c21af444ea ("ARM: shmobile: smp: Add function to prioritize DT SMP")
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Olof Johansson <olof@lixom.net>
A new user of the Kconfig selection of ARCH_REQUIRE_GPIOLIB
has appeared. Replace with just selecting GPIOLIB.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Add RTC source clock as Exynos7 needs source (32.768KHz) clock
for RTC block. Without this currently S3C RTC driver probe is broken
on this SoC.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Ensure that we don't forget to set up the disconnection timer for the
case when a connect request is fulfilled after the RPC request that
initiated it has timed out or been interrupted.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
The logic was inverted here, set the bit if frames are pending.
Fixes: ba8c3d6f16 ("mac80211: add an intermediate software queue implementation")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The switch on chandef->width is missing a break on the
NL8211_CHAN_WIDTH_80P80 case; currently we get a WARN_ON when
center_freq2 is non-zero because of the missing break.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The counter conf->empty_inactive_list_nr is only used for determine if the
raid5 is congested which is deal with in function raid5_congested().
It was increased in get_free_stripe() when conf->inactive_list got to be
empty and decreased in release_inactive_stripe_list() when splice
temp_inactive_list to conf->inactive_list. However, this may have a
problem when raid5_get_active_stripe or stripe_add_to_batch_list was called,
because these two functions may call list_del_init(&sh->lru) to delete sh from
"conf->inactive_list + hash" which may cause "conf->inactive_list + hash" to
be empty when atomic_inc_not_zero(&sh->count) got false. So a check should be
done at these two point and increase empty_inactive_list_nr accordingly.
Otherwise the counter may get to be negative number which would influence
async readahead from VFS.
Signed-off-by: ZhengYuan Liu <liuzhengyuan@kylinos.cn>
Signed-off-by: Shaohua Li <shli@fb.com>
The targets for lkdtm's objcopy were missing which caused them to always
be rebuilt. This corrects the problem.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
The variable in use here doesn't matter (it's just used to exercise taking
up stack space), but this changes its use to pass its address instead,
to avoid a compiler warning:
drivers/misc/lkdtm_usercopy.c:54:15: warning: 'bad_stack' may be used uninitialized in this function [-Wmaybe-uninitialized]
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
If the connect attempt immediately fails with an EADDRNOTAVAIL error, then
that means our choice of source port number was bad.
This error is expected when we set the SO_REUSEPORT socket option and we
have 2 sockets sharing the same source and destination address and port
combinations.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Fixes: 402e23b4ed ("SUNRPC: Fix stupid typo in xs_sock_set_reuseport")
Cc: stable@vger.kernel.org # v4.0+
With commit 56f23fdbb6 ("Btrfs: fix file/data loss caused by fsync after
rename and new inode") we got simple fix for a functional issue when the
following sequence of actions is done:
at transaction N
create file A at directory D
at transaction N + M (where M >= 1)
move/rename existing file A from directory D to directory E
create a new file named A at directory D
fsync the new file
power fail
The solution was to simply detect such scenario and fallback to a full
transaction commit when we detect it. However this turned out to had a
significant impact on throughput (and a bit on latency too) for benchmarks
using the dbench tool, which simulates real workloads from smbd (Samba)
servers. For example on a test vm (with a debug kernel):
Unpatched:
Throughput 19.1572 MB/sec 32 clients 32 procs max_latency=1005.229 ms
Patched:
Throughput 23.7015 MB/sec 32 clients 32 procs max_latency=809.206 ms
The patched results (this patch is applied) are similar to the results of
a kernel with the commit 56f23fdbb6 ("Btrfs: fix file/data loss caused
by fsync after rename and new inode") reverted.
This change avoids the fallback to a transaction commit and instead makes
sure all the names of the conflicting inode (the one that had a name in a
past transaction that matches the name of the new file in the same parent
directory) are logged so that at log replay time we don't lose neither the
new file nor the old file, and the old file gets the name it was renamed
to.
This also ends up avoiding a full transaction commit for a similar case
that involves an unlink instead of a rename of the old file:
at transaction N
create file A at directory D
at transaction N + M (where M >= 1)
remove file A
create a new file named A at directory D
fsync the new file
power fail
Signed-off-by: Filipe Manana <fdmanana@suse.com>
When we attempt to read an inode from disk, we end up always returning an
-ESTALE error to the caller regardless of the actual failure reason, which
can be an out of memory problem (when allocating a path), some error found
when reading from the fs/subvolume btree (like a genuine IO error) or the
inode does not exists. So lets start returning the real error code to the
callers so that they don't treat all -ESTALE errors as meaning that the
inode does not exists (such as during orphan cleanup). This will also be
needed for a subsequent patch in the same series dealing with a special
fsync case.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
When doing an incremental send, if we find a new/modified/deleted extent,
reference or xattr without having previously processed the corresponding
inode item we end up exexuting a BUG_ON(). This is because whenever an
extent, xattr or reference is added, modified or deleted, we always expect
to have the corresponding inode item updated. However there are situations
where this will not happen due to transient -ENOMEM or -ENOSPC errors when
doing delayed inode updates.
For example, when punching holes we can succeed in deleting and modifying
(shrinking) extents but later fail to do the delayed inode update. So after
such failure we close our transaction handle and right after a snapshot of
the fs/subvol tree can be made and used later for a send operation. The
same thing can happen during truncate, link, unlink, and xattr related
operations.
So instead of executing a BUG_ON, make send return an -EIO error and print
an informative error message do dmesg/syslog.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
The caller of send_utimes() is supposed to be sure that the inode number
it passes to this function does actually exists in the send snapshot.
However due to logic/algorithm bugs (such as the one fixed by the patch
titled "Btrfs: send, fix invalid leaf accesses due to incorrect utimes
operations"), this might not be the case and when that happens it makes
send_utimes() access use an unrelated leaf item as the target inode item
or access beyond a leaf's boundaries (when the leaf is full and
path->slots[0] matches the number of items in the leaf).
So if the call to btrfs_search_slot() done by send_utimes() does not find
the inode item, just make sure send_utimes() returns -ENOENT and does not
silently accesses unrelated leaf items or does invalid leaf accesses, also
allowing us to easialy and deterministically catch such algorithmic/logic
bugs.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
During an incremental send, if we have delayed rename operations for inodes
that were children of directories which were removed in the send snapshot,
we can end up accessing incorrect items in a leaf or accessing beyond the
last item of the leaf due to issuing utimes operations for the removed
inodes. Consider the following example:
Parent snapshot:
. (ino 256)
|--- a/ (ino 257)
| |--- c/ (ino 262)
|
|--- b/ (ino 258)
| |--- d/ (ino 263)
|
|--- del/ (ino 261)
|--- x/ (ino 259)
|--- y/ (ino 260)
Send snapshot:
. (ino 256)
|--- a/ (ino 257)
|
|--- b/ (ino 258)
|
|--- c/ (ino 262)
| |--- y/ (ino 260)
|
|--- d/ (ino 263)
|--- x/ (ino 259)
1) When processing inodes 259 and 260, we end up delaying their rename
operations because their parents, inodes 263 and 262 respectively, were
not yet processed and therefore not yet renamed;
2) When processing inode 262, its rename operation is issued and right
after the rename operation for inode 260 is issued. However right after
issuing the rename operation for inode 260, at send.c:apply_dir_move(),
we issue utimes operations for all current and past parents of inode
260. This means we try to send a utimes operation for its old parent,
inode 261 (deleted in the send snapshot), which does not cause any
immediate and deterministic failure, because when the target inode is
not found in the send snapshot, the send.c:send_utimes() function
ignores it and uses the leaf region pointed to by path->slots[0],
which can be any unrelated item (belonging to other inode) or it can
be a region outside the leaf boundaries, if the leaf is full and
path->slots[0] matches the number of items in the leaf. So we end
up either successfully sending a utimes operation, which is fine
and irrelevant because the old parent (inode 261) will end up being
deleted later, or we end up doing an invalid memory access tha
crashes the kernel.
So fix this by making apply_dir_move() issue utimes operations only for
parents that still exist in the send snapshot. In a separate patch we
will make send_utimes() return an error (-ENOENT) if the given inode
does not exists in the send snapshot.
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
[Rewrote change log to be more detailed and better organized]
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Under certain situations, when doing an incremental send, we can end up
not freeing orphan_dir_info structures as soon as they are no longer
needed. Instead we end up freeing them only after finishing the send
stream, which causes a warning to be emitted:
[282735.229200] ------------[ cut here ]------------
[282735.229968] WARNING: CPU: 9 PID: 10588 at fs/btrfs/send.c:6298 btrfs_ioctl_send+0xe2f/0xe51 [btrfs]
[282735.231282] Modules linked in: btrfs crc32c_generic xor raid6_pq acpi_cpufreq tpm_tis ppdev tpm parport_pc psmouse parport sg pcspkr i2c_piix4 i2c_core evdev processor serio_raw button loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring virtio e1000 scsi_mod floppy [last unloaded: btrfs]
[282735.237130] CPU: 9 PID: 10588 Comm: btrfs Tainted: G W 4.6.0-rc7-btrfs-next-31+ #1
[282735.239309] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[282735.240160] 0000000000000000 ffff880224273ca8 ffffffff8126b42c 0000000000000000
[282735.240160] 0000000000000000 ffff880224273ce8 ffffffff81052b14 0000189a24273ac8
[282735.240160] ffff8802210c9800 0000000000000000 0000000000000001 0000000000000000
[282735.240160] Call Trace:
[282735.240160] [<ffffffff8126b42c>] dump_stack+0x67/0x90
[282735.240160] [<ffffffff81052b14>] __warn+0xc2/0xdd
[282735.240160] [<ffffffff81052beb>] warn_slowpath_null+0x1d/0x1f
[282735.240160] [<ffffffffa03c99d5>] btrfs_ioctl_send+0xe2f/0xe51 [btrfs]
[282735.240160] [<ffffffffa0398358>] btrfs_ioctl+0x14f/0x1f81 [btrfs]
[282735.240160] [<ffffffff8108e456>] ? arch_local_irq_save+0x9/0xc
[282735.240160] [<ffffffff8118da05>] vfs_ioctl+0x18/0x34
[282735.240160] [<ffffffff8118e00c>] do_vfs_ioctl+0x550/0x5be
[282735.240160] [<ffffffff81196f0c>] ? __fget+0x6b/0x77
[282735.240160] [<ffffffff81196fa1>] ? __fget_light+0x62/0x71
[282735.240160] [<ffffffff8118e0d1>] SyS_ioctl+0x57/0x79
[282735.240160] [<ffffffff8149e025>] entry_SYSCALL_64_fastpath+0x18/0xa8
[282735.240160] [<ffffffff81100c6b>] ? time_hardirqs_off+0x9/0x14
[282735.240160] [<ffffffff8108e87d>] ? trace_hardirqs_off_caller+0x1f/0xaa
[282735.256343] ---[ end trace a4539270c8056f93 ]---
Consider the following example:
Parent snapshot:
. (ino 256)
|--- a/ (ino 257)
| |--- c/ (ino 260)
|
|--- del/ (ino 259)
|--- tmp/ (ino 258)
|--- x/ (ino 261)
|--- y/ (ino 262)
Send snapshot:
. (ino 256)
|--- a/ (ino 257)
| |--- x/ (ino 261)
| |--- y/ (ino 262)
|
|--- c/ (ino 260)
|--- tmp/ (ino 258)
1) When processing inode 258, we end up delaying its rename operation
because it has an ancestor (in the send snapshot) that has a higher
inode number (inode 260) which was also renamed in the send snapshot,
therefore we delay the rename of inode 258 so that it happens after
inode 260 is renamed;
2) When processing inode 259, we end up delaying its deletion (rmdir
operation) because it has a child inode (258) that has its rename
operation delayed. At this point we allocate an orphan_dir_info
structure and tag inode 258 so that we later attempt to see if we
can delete (rmdir) inode 259 once inode 258 is renamed;
3) When we process inode 260, after renaming it we finally do the rename
operation for inode 258. Once we issue the rename operation for inode
258 we notice that this inode was tagged so that we attempt to see
if at this point we can delete (rmdir) inode 259. But at this point
we can not still delete inode 259 because it has 2 children, inodes
261 and 262, that were not yet processed and therefore not yet
moved (renamed) away from inode 259. We end up not freeing the
orphan_dir_info structure allocated in step 2;
4) We process inodes 261 and 262, and once we move/rename inode 262
we issue the rmdir operation for inode 260;
5) We finish the send stream and notice that red black tree that
contains orphan_dir_info structures is not empty, so we emit
a warning and then free any orphan_dir_structures left.
So fix this by freeing an orphan_dir_info structure once we try to
apply a pending rename operation if we can not delete yet the tagged
directory.
A test case for fstests follows soon.
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
[Modified changelog to be more detailed and easier to understand]
Under certain situations, an incremental send operation can contain
a rmdir operation that will make the receiving end fail when attempting
to execute it, because the target directory is not yet empty.
Consider the following example:
Parent snapshot:
. (ino 256)
|--- a/ (ino 257)
| |--- c/ (ino 260)
|
|--- del/ (ino 259)
|--- tmp/ (ino 258)
|--- x/ (ino 261)
Send snapshot:
. (ino 256)
|--- a/ (ino 257)
| |--- x/ (ino 261)
|
|--- c/ (ino 260)
|--- tmp/ (ino 258)
1) When processing inode 258, we delay its rename operation because inode
260 is its new parent in the send snapshot and it was not yet renamed
(since 260 > 258, that is, beyond the current progress);
2) When processing inode 259, we realize we can not yet send an rmdir
operation (against inode 259) because inode 258 was still not yet
renamed/moved away from inode 259. Therefore we update data structures
so that after inode 258 is renamed, we try again to see if we can
finally send an rmdir operation for inode 259;
3) When we process inode 260, we send a rename operation for it followed
by a rename operation for inode 258. Once we send the rename operation
for inode 258 we then check if we can finally issue an rmdir for its
previous parent, inode 259, by calling the can_rmdir() function with
a value of sctx->cur_ino + 1 (260 + 1 = 261) for its "progress"
argument. This makes can_rmdir() return true (value 1) because even
though there's still a child inode of inode 259 that was not yet
renamed/moved, which is inode 261, the given value of progress (261)
is not lower then 261 (that is, not lower than the inode number of
some child of inode 259). So we end up sending a rmdir operation for
inode 259 before its child inode 261 is processed and renamed.
So fix this by passing the correct progress value to the call to
can_rmdir() from within apply_dir_move() (where we issue delayed rename
operations), which should match stcx->cur_ino (the number of the inode
currently being processed) and not sctx->cur_ino + 1.
A test case for fstests follows soon.
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
[Rewrote change log to be more detailed, clear and well formatted]
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Example scenario:
Parent snapshot:
. (ino 277)
|---- tmp/ (ino 278)
|---- pre/ (ino 280)
| |---- wait_dir/ (ino 281)
|
|---- desc/ (ino 282)
|---- ance/ (ino 283)
| |---- below_ance/ (ino 279)
|
|---- other_dir/ (ino 284)
Send snapshot:
. (ino 277)
|---- tmp/ (ino 278)
|---- other_dir/ (ino 284)
|---- below_ance/ (ino 279)
| |---- pre/ (ino 280)
|
|---- wait_dir/ (ino 281)
|---- desc/ (ino 282)
|---- ance/ (ino 283)
While computing the send stream the following steps happen:
1) While processing inode 279 we end up delaying its rename operation
because its new parent in the send snapshot, inode 284, was not
yet processed and therefore not yet renamed;
2) Later when processing inode 280 we end up renaming it immediately to
"ance/below_once/pre" and not delay its rename operation because its
new parent (inode 279 in the send snapshot) has its rename operation
delayed and inode 280 is not an encestor of inode 279 (its parent in
the send snapshot) in the parent snapshot;
3) When processing inode 281 we end up delaying its rename operation
because its new parent in the send snapshot, inode 284, was not yet
processed and therefore not yet renamed;
4) When processing inode 282 we do not delay its rename operation because
its parent in the send snapshot, inode 281, already has its own rename
operation delayed and our current inode (282) is not an ancestor of
inode 281 in the parent snapshot. Therefore inode 282 is renamed to
"ance/below_ance/pre/wait_dir";
5) When processing inode 283 we realize that we can rename it because one
of its ancestors in the send snapshot, inode 281, has its rename
operation delayed and inode 283 is not an ancestor of inode 281 in the
parent snapshot. So a rename operation to rename inode 283 to
"ance/below_ance/pre/wait_dir/desc/ance" is issued. This path is
invalid due to a missing path building loop that was undetected by
the incremental send implementation, as inode 283 ends up getting
included twice in the path (once with its path in the parent snapshot).
Therefore its rename operation must wait before the ancestor inode 284
is renamed.
Fix this by not terminating the rename dependency checks when we find an
ancestor, in the send snapshot, that has its rename operation delayed. So
that we continue doing the same checks if the current inode is not an
ancestor, in the parent snapshot, of an ancestor in the send snapshot we
are processing in the loop.
The problem and reproducer were reported by Robbie Ko, as part of a patch
titled "Btrfs: incremental send, avoid ancestor rename to descendant".
However the fix was unnecessarily complicated and can be addressed with
much less code and effort.
Reported-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
The function path_loop() can return a negative integer, signaling an
error, 0 if there's no path loop and 1 if there's a path loop. We were
treating any non zero values as meaning that a path loop exists. Fix
this by explicitly checking for errors and gracefully return them to
user space.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
When doing an incremental send we can end up not moving directories that
have the same name. This happens when the same parent directory has
different child directories with the same name in the parent and send
snapshots.
For example, consider the following scenario:
Parent snapshot:
. (ino 256)
|---- d/ (ino 257)
| |--- p1/ (ino 258)
|
|---- p1/ (ino 259)
Send snapshot:
. (ino 256)
|--- d/ (ino 257)
|--- p1/ (ino 259)
|--- p1/ (ino 258)
The directory named "d" (inode 257) has in both snapshots an entry with
the name "p1" but it refers to different inodes in both snapshots (inode
258 in the parent snapshot and inode 259 in the send snapshot). When
attempting to move inode 258, the operation is delayed because its new
parent, inode 259, was not yet moved/renamed (as the stream is currently
processing inode 258). Then when processing inode 259, we also end up
delaying its move/rename operation so that it happens after inode 258 is
moved/renamed. This decision to delay the move/rename rename operation
of inode 259 is due to the fact that the new parent inode (257) still
has inode 258 as its child, which has the same name has inode 259. So
we end up with inode 258 move/rename operation waiting for inode's 259
move/rename operation, which in turn it waiting for inode's 258
move/rename. This results in ending the send stream without issuing
move/rename operations for inodes 258 and 259 and generating the
following warnings in syslog/dmesg:
[148402.979747] ------------[ cut here ]------------
[148402.980588] WARNING: CPU: 14 PID: 4117 at fs/btrfs/send.c:6177 btrfs_ioctl_send+0xe03/0xe51 [btrfs]
[148402.981928] Modules linked in: btrfs crc32c_generic xor raid6_pq acpi_cpufreq tpm_tis ppdev tpm parport_pc psmouse parport sg pcspkr i2c_piix4 i2c_core evdev processor serio_raw button loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring virtio e1000 scsi_mod floppy [last unloaded: btrfs]
[148402.986999] CPU: 14 PID: 4117 Comm: btrfs Tainted: G W 4.6.0-rc7-btrfs-next-31+ #1
[148402.988136] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[148402.988136] 0000000000000000 ffff88022139fca8 ffffffff8126b42c 0000000000000000
[148402.988136] 0000000000000000 ffff88022139fce8 ffffffff81052b14 000018212139fac8
[148402.988136] ffff88022b0db400 0000000000000000 0000000000000001 0000000000000000
[148402.988136] Call Trace:
[148402.988136] [<ffffffff8126b42c>] dump_stack+0x67/0x90
[148402.988136] [<ffffffff81052b14>] __warn+0xc2/0xdd
[148402.988136] [<ffffffff81052beb>] warn_slowpath_null+0x1d/0x1f
[148402.988136] [<ffffffffa04bc831>] btrfs_ioctl_send+0xe03/0xe51 [btrfs]
[148402.988136] [<ffffffffa048b358>] btrfs_ioctl+0x14f/0x1f81 [btrfs]
[148402.988136] [<ffffffff8108e456>] ? arch_local_irq_save+0x9/0xc
[148402.988136] [<ffffffff8108eb51>] ? __lock_is_held+0x3c/0x57
[148402.988136] [<ffffffff8118da05>] vfs_ioctl+0x18/0x34
[148402.988136] [<ffffffff8118e00c>] do_vfs_ioctl+0x550/0x5be
[148402.988136] [<ffffffff81196f0c>] ? __fget+0x6b/0x77
[148402.988136] [<ffffffff81196fa1>] ? __fget_light+0x62/0x71
[148402.988136] [<ffffffff8118e0d1>] SyS_ioctl+0x57/0x79
[148402.988136] [<ffffffff8149e025>] entry_SYSCALL_64_fastpath+0x18/0xa8
[148402.988136] [<ffffffff8108e89d>] ? trace_hardirqs_off_caller+0x3f/0xaa
[148403.011373] ---[ end trace a4539270c8056f8b ]---
[148403.012296] ------------[ cut here ]------------
[148403.013071] WARNING: CPU: 14 PID: 4117 at fs/btrfs/send.c:6194 btrfs_ioctl_send+0xe19/0xe51 [btrfs]
[148403.014447] Modules linked in: btrfs crc32c_generic xor raid6_pq acpi_cpufreq tpm_tis ppdev tpm parport_pc psmouse parport sg pcspkr i2c_piix4 i2c_core evdev processor serio_raw button loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix libata virtio_pci virtio_ring virtio e1000 scsi_mod floppy [last unloaded: btrfs]
[148403.019708] CPU: 14 PID: 4117 Comm: btrfs Tainted: G W 4.6.0-rc7-btrfs-next-31+ #1
[148403.020104] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[148403.020104] 0000000000000000 ffff88022139fca8 ffffffff8126b42c 0000000000000000
[148403.020104] 0000000000000000 ffff88022139fce8 ffffffff81052b14 000018322139fac8
[148403.020104] ffff88022b0db400 0000000000000000 0000000000000001 0000000000000000
[148403.020104] Call Trace:
[148403.020104] [<ffffffff8126b42c>] dump_stack+0x67/0x90
[148403.020104] [<ffffffff81052b14>] __warn+0xc2/0xdd
[148403.020104] [<ffffffff81052beb>] warn_slowpath_null+0x1d/0x1f
[148403.020104] [<ffffffffa04bc847>] btrfs_ioctl_send+0xe19/0xe51 [btrfs]
[148403.020104] [<ffffffffa048b358>] btrfs_ioctl+0x14f/0x1f81 [btrfs]
[148403.020104] [<ffffffff8108e456>] ? arch_local_irq_save+0x9/0xc
[148403.020104] [<ffffffff8108eb51>] ? __lock_is_held+0x3c/0x57
[148403.020104] [<ffffffff8118da05>] vfs_ioctl+0x18/0x34
[148403.020104] [<ffffffff8118e00c>] do_vfs_ioctl+0x550/0x5be
[148403.020104] [<ffffffff81196f0c>] ? __fget+0x6b/0x77
[148403.020104] [<ffffffff81196fa1>] ? __fget_light+0x62/0x71
[148403.020104] [<ffffffff8118e0d1>] SyS_ioctl+0x57/0x79
[148403.020104] [<ffffffff8149e025>] entry_SYSCALL_64_fastpath+0x18/0xa8
[148403.020104] [<ffffffff8108e89d>] ? trace_hardirqs_off_caller+0x3f/0xaa
[148403.038981] ---[ end trace a4539270c8056f8c ]---
There's another issue caused by similar (but more complex) changes in the
directory hierarchy that makes move/rename operations fail, described with
the following example:
Parent snapshot:
.
|---- a/ (ino 262)
| |---- c/ (ino 268)
|
|---- d/ (ino 263)
|---- ance/ (ino 267)
|---- e/ (ino 264)
|---- f/ (ino 265)
|---- ance/ (ino 266)
Send snapshot:
.
|---- a/ (ino 262)
|---- c/ (ino 268)
| |---- ance/ (ino 267)
|
|---- d/ (ino 263)
| |---- ance/ (ino 266)
|
|---- f/ (ino 265)
|---- e/ (ino 264)
When the inode 265 is processed, the path for inode 267 is computed, which
at that time corresponds to "d/ance", and it's stored in the names cache.
Later on when processing inode 266, we end up orphanizing (renaming to a
name matching the pattern o<ino>-<gen>-<seq>) inode 267 because it has
the same name as inode 266 and it's currently a child of the new parent
directory (inode 263) for inode 266. After the orphanization and while we
are still processing inode 266, a rename operation for inode 266 is
generated. However the source path for that rename operation is incorrect
because it ends up using the old, pre-orphanization, name of inode 267.
The no longer valid name for inode 267 was previously cached when
processing inode 265 and it remains usable and considered valid until
the inode currently being processed has a number greater than 267.
This resulted in the receiving side failing with the following error:
ERROR: rename d/ance/ance -> d/ance failed: No such file or directory
So fix these issues by detecting such circular dependencies for rename
operations and by clearing the cached name of an inode once the inode
is orphanized.
A test case for fstests will follow soon.
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
[Rewrote change log to be more detailed and organized, and improved
comments]
Signed-off-by: Filipe Manana <fdmanana@suse.com>
When we start an fsync we start ordered extents for all delalloc ranges.
However before attempting to log the inode, we only wait for those ordered
extents if we are not doing a full sync (bit BTRFS_INODE_NEEDS_FULL_SYNC
is set in the inode's flags). This means that if an ordered extent
completes with an IO error before we check if we can skip logging the
inode, we will not catch and report the IO error to user space. This is
because on an IO error, when the ordered extent completes we do not
update the inode, so if the inode was not previously updated by the
current transaction we end up not logging it through calls to fsync and
therefore not check its mapping flags for the presence of IO errors.
Fix this by checking for errors in the flags of the inode's mapping when
we notice we can skip logging the inode.
This caused sporadic failures in the test generic/331 (which explicitly
tests for IO errors during an fsync call).
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Liu Bo <bo.li.liu@oracle.com>
A number of fuzzing failures seem to be caused by allocation bitmaps
or other metadata blocks being pointed at the superblock.
This can cause kernel BUG or WARNings once the superblock is
overwritten, so validate the group descriptor blocks to make sure this
doesn't happen.
Cc: stable@vger.kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The Hurd is using inode fields which restricts it from using more
advanced ext4 file system features, due to design choices made over a
decade ago. By giving the Hurd an extended attribute index field we
allow it to move the translator and author fields out of the core
inode fields, and hopefully we can get rid of ugly hacks such as
EXT4_OS_HURD and EXT4_MOUNT2_HURD_COMPAT somday.
For more information please see:
https://summerofcode.withgoogle.com/projects/#5869799859027968
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
md pending write counter must be incremented after bio is split,
otherwise it gets decremented too many times in end bio callback and
becomes negative.
Signed-off-by: Tomasz Majchrzak <tomasz.majchrzak@intel.com>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Shaohua Li <shli@fb.com>
In 3245d460 (regmap: cache: Fall back to register by register read for
cache defaults) non-readable registers are skipped when initializing
reg_defaults, but are still included in num_reg_defaults. So there can
be uninitialized entries at the end of reg_defaults, which can cause
problems when the register cache initializes from the full array.
Fixed it by excluding non-readable registers from the count as well.
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
To quote Rick why there is no need for shared mapping on !MMU systems:
|With MMU, shared futex keys need to identify the physical backing for
|a memory address because it may be mapped at different addresses in
|different processes (or even multiple times in the same process).
|Without MMU this cannot happen. You only have physical addresses. So
|the "private futex" behavior of using the virtual address as the key
|is always correct (for both shared and private cases) on nommu
|systems.
This patch disables the FLAGS_SHARED in a way that allows the compiler to
remove that code.
[bigeasy: Added changelog ]
Reported-by: Rich Felker <dalias@libc.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20160729143230.GA21715@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Whenever thresholds are changed the hash tables are rebuilt. This is
done by enumerating all policies and hashing and inserting them into
the right table according to the thresholds and direction.
Because socket policies are also contained in net->xfrm.policy_all but
no hash tables are defined for their direction (dir + XFRM_POLICY_MAX)
this causes a NULL or invalid pointer dereference after returning from
policy_hash_bysel() if the rebuild is done while any socket policies
are installed.
Since the rebuild after changing thresholds is scheduled this crash
could even occur if the userland sets thresholds seemingly before
installing any socket policies.
Fixes: 53c2e285f9 ("xfrm: Do not hash socket policies")
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The call to spi_master_put() in img_spfi_remove() is redundant since
the master is registered using devm_spi_register_master() and no
reference hold by using spi_master_get() in img_spfi_remove().
This is detected by Coccinelle semantic patch.
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The call to spi_master_put() in mtk_spi_remove() is redundant since
the master is registered using devm_spi_register_master() and no
reference hold by using spi_master_get() in mtk_spi_remove().
This is detected by Coccinelle semantic patch.
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The call to spi_master_put() in spi_qup_remove() is redundant since
the master is registered using devm_spi_register_master() and no
reference hold by using spi_master_get() in spi_qup_remove().
This is detected by Coccinelle semantic patch.
Signed-off-by: Wei Yongjun <weiyj.lk@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The SND_SOC_DAPM_PRE_PMU case would call startup()/hw_params() that
might access substream->runtime through other functions.
For example:
Unable to handle kernel NULL pointer dereference at virtual address
[....]
PC is at snd_pcm_hw_rule_add+0x24/0x1b0
LR is at snd_pcm_hw_constraint_list+0x20/0x28
[....]
Process arecord (pid: 424, stack limit = 0xffffffc1ecaf0020)
Call trace:
[<ffffffc00086be68>] snd_pcm_hw_rule_add+0x24/0x1b0
[<ffffffc00086c014>] snd_pcm_hw_constraint_list+0x20/0x28
[<ffffffc0008b47a4>] cs53l30_pcm_startup+0x24/0x30
[<ffffffc0008a6260>] snd_soc_dai_link_event+0x290/0x354
[<ffffffc0008a7528>] dapm_seq_check_event.isra.31+0x134/0x2c8
[<ffffffc0008a7768>] dapm_seq_run_coalesced+0x94/0x1c8
[<ffffffc0008a7940>] dapm_seq_run+0xa4/0x404
[<ffffffc0008a8bac>] dapm_power_widgets+0x524/0x984
[<ffffffc0008ab1c4>] snd_soc_dapm_stream_event+0x8c/0xa8
[<ffffffc0008ac7f4>] soc_pcm_prepare+0x10c/0x1ec
[<ffffffc000865b9c>] snd_pcm_do_prepare+0x1c/0x38
[<ffffffc000865600>] snd_pcm_action_single+0x40/0x88
[<ffffffc0008656b8>] snd_pcm_action_nonatomic+0x70/0x90
[<ffffffc000868d28>] snd_pcm_common_ioctl1+0xb6c/0xdd8
[<ffffffc000869508>] snd_pcm_capture_ioctl1+0x200/0x334
[<ffffffc00086a084>] snd_pcm_ioctl_compat+0x648/0x95c
[<ffffffc0001ff4b4>] compat_SyS_ioctl+0xac/0xfc4
[<ffffffc000084cf0>] el0_svc_naked+0x24/0x28
---[ end trace 0dc4f99c2759c35c ]---
So this patch adds a dummy runtime for the original dummy substream
to merely avoid the NULL pointer access.
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
AFAICT this message is just printed whenever input validation fails.
This is a normal failure and we shouldn't be dumping the stack over it.
Looks like it was originally a printk that was maybe incorrectly
upgraded to a WARN:
commit 62db5cfd70
Author: stephen hemminger <shemminger@vyatta.com>
Date: Wed May 12 06:37:06 2010 +0000
xfrm: add severity to printk
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Under CONFIG_HARDENED_USERCOPY, this adds object size checking to the
SLUB allocator to catch any copies that may span objects. Includes a
redzone handling fix discovered by Michael Ellerman.
Based on code from PaX and grsecurity.
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Reviwed-by: Laura Abbott <labbott@redhat.com>
Under CONFIG_HARDENED_USERCOPY, this adds object size checking to the
SLAB allocator to catch any copies that may span objects.
Based on code from PaX and grsecurity.
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Enables CONFIG_HARDENED_USERCOPY checks on powerpc.
Based on code from PaX and grsecurity.
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Enables CONFIG_HARDENED_USERCOPY checks on arm64. As done by KASAN in -next,
renames the low-level functions to __arch_copy_*_user() so a static inline
can do additional work before the copy.
Signed-off-by: Kees Cook <keescook@chromium.org>
Enables CONFIG_HARDENED_USERCOPY checks on x86. This is done both in
copy_*_user() and __copy_*_user() because copy_*_user() actually calls
down to _copy_*_user() and not __copy_*_user().
Based on code from PaX and grsecurity.
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
This is the start of porting PAX_USERCOPY into the mainline kernel. This
is the first set of features, controlled by CONFIG_HARDENED_USERCOPY. The
work is based on code by PaX Team and Brad Spengler, and an earlier port
from Casey Schaufler. Additional non-slab page tests are from Rik van Riel.
This patch contains the logic for validating several conditions when
performing copy_to_user() and copy_from_user() on the kernel object
being copied to/from:
- address range doesn't wrap around
- address range isn't NULL or zero-allocated (with a non-zero copy size)
- if on the slab allocator:
- object size must be less than or equal to copy size (when check is
implemented in the allocator, which appear in subsequent patches)
- otherwise, object must not span page allocations (excepting Reserved
and CMA ranges)
- if on the stack
- object must not extend before/after the current process stack
- object must be contained by a valid stack frame (when there is
arch/build support for identifying stack frames)
- object must not overlap with kernel text
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
This creates per-architecture function arch_within_stack_frames() that
should validate if a given object is contained by a kernel stack frame.
Initial implementation is on x86.
This is based on code from PaX.
Signed-off-by: Kees Cook <keescook@chromium.org>
Now that we have moved the check for valid clkctrl_offs to the caller of
am33xx_cm_wait_module_ready/idle and omap4_cminst_wait_module_ready/idle
let's remove the now redundant check for clkctrl_offs from these functions.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Previously the low-level CM call internal to the
_omap4_wait_target_ready/disable calls was responsible for checking for
a valid clkctrl_offs. Now we must also consider the value of the
prcm.omap4.flags because if HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET is set in
the flags then clkctrl_offs of 0 is valid.
Let's add this check into the _omap4_wait_target_ready/disable where we
have access to both the clkctrl_offs and the flags values and simply
return 0 without calling the low level CM call at all, which would have
returned 0 anyway if the clktrl_offs was zero.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The RTC hwmod on AM335x family of SoCs is unique in that the
clkctrl_offs in the PRCM is 0. We rely on a clkctrl_offs of zero as
indicating no clkctrl is present so we must flag this hwmod with
HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET to indicate the 0 clkctrl_offs is in
fact valid in this case.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Nearly all modules on OMAP4 and newer platforms have clkctrl offsets
that are non-zero except for the RTC on am335x. Because we rely on a
clkctrl_offset of zero to indicate no clkctrl_offset being present,
lets add a HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET flag to use to indicate
hwmods that have a valid clkctrl_offset of 0.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Acked-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add missing sysconfig/sysstatus information
to OMAP3 hwmod. The information has been
checked against OMAP34xx and OMAP36xx TRM.
Without this change DSI block is not reset
during boot, which is required for working
Nokia N950 display.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Tony Lindgren <tony@atomide.com>
If we hit any of the error conditions inside xfrm_dump_sa(), then
xfrm_state_walk_init() never gets called. However, we still call
xfrm_state_walk_done() from xfrm_dump_sa_done(), which will crash
because the state walk was never initialized properly.
We can fix this by setting cb->args[0] only after we've processed the
first element and checking this before calling xfrm_state_walk_done().
Fixes: d3623099d3 ("ipsec: add support of limited SA dump")
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2016-07-18 09:37:02 +02:00
1577 changed files with 17653 additions and 9382 deletions
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
