Linux 4.13-rc3

Pull x86 fixes from Thomas Gleixner:
 "A small set of x86 fixes:

   - prevent the kernel from using the EFI reboot method when EFI is
     disabled.

   - two patches addressing clang issues"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Disable the address-of-packed-member compiler warning
  x86/efi: Fix reboot_mode when EFI runtime services are disabled
  x86/boot: #undef memcpy() et al in string.c

Documentation/device-mapper/dm-raid.txt

@@ -343,3 +343,4 @@ Version History
 1.11.0  Fix table line argument order
 	(wrong raid10_copies/raid10_format sequence)
 1.11.1  Add raid4/5/6 journal write-back support via journal_mode option
+1.12.1  fix for MD deadlock between mddev_suspend() and md_write_start() available

Documentation/devicetree/bindings/crypto/inside-secure-safexcel.txt

@@ -8,7 +8,6 @@ Required properties:
 
 Optional properties:
 - clocks: Reference to the crypto engine clock.
-- dma-mask: The address mask limitation. Defaults to 64.
 
 Example:
 
@@ -24,6 +23,5 @@ Example:
 		interrupt-names = "mem", "ring0", "ring1", "ring2", "ring3",
 				  "eip";
 		clocks = <&cpm_syscon0 1 26>;
-		dma-mask = <0xff 0xffffffff>;
 		status = "disabled";
 	};

Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt

@@ -78,7 +78,6 @@ Example:
 	};
 
 	dwmmc0@12200000 {
-		num-slots = <1>;
 		cap-mmc-highspeed;
 		cap-sd-highspeed;
 		broken-cd;

Documentation/devicetree/bindings/mmc/img-dw-mshc.txt

@@ -24,6 +24,5 @@ Example:
 
 		fifo-depth = <0x20>;
 		bus-width = <4>;
-		num-slots = <1>;
 		disable-wp;
 	};

Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt

@@ -36,7 +36,6 @@ Example:
 
 	/* Board portion */
 	dwmmc0@fcd03000 {
-		num-slots = <1>;
 		vmmc-supply = <&ldo12>;
 		fifo-depth = <0x100>;
 		pinctrl-names = "default";
@@ -52,7 +51,6 @@ Example:
 
 	dwmmc_1: dwmmc1@f723e000 {
 		compatible = "hisilicon,hi6220-dw-mshc";
-		num-slots = <0x1>;
 		bus-width = <0x4>;
 		disable-wp;
 		cap-sd-highspeed;

Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt

@@ -12,12 +12,12 @@ Required Properties:
 * #address-cells: should be 1.
 * #size-cells: should be 0.
 
-# Slots: The slot specific information are contained within child-nodes with
-  each child-node representing a supported slot. There should be atleast one
-  child node representing a card slot. The name of the child node representing
-  the slot is recommended to be slot@n where n is the unique number of the slot
-  connected to the controller. The following are optional properties which
-  can be included in the slot child node.
+# Slots (DEPRECATED): The slot specific information are contained within
+  child-nodes with each child-node representing a supported slot. There should
+  be atleast one child node representing a card slot. The name of the child node
+  representing the slot is recommended to be slot@n where n is the unique number
+  of the slot connected to the controller. The following are optional properties
+  which can be included in the slot child node.
 
 	* reg: specifies the physical slot number. The valid values of this
 	  property is 0 to (num-slots -1), where num-slots is the value
@@ -63,7 +63,7 @@ Optional properties:
   clock(cclk_out). If it's not specified, max is 200MHZ and min is 400KHz by default.
 	  (Use the "max-frequency" instead of "clock-freq-min-max".)
 
-* num-slots: specifies the number of slots supported by the controller.
+* num-slots (DEPRECATED): specifies the number of slots supported by the controller.
   The number of physical slots actually used could be equal or less than the
   value specified by num-slots. If this property is not specified, the value
   of num-slot property is assumed to be 1.
@@ -124,7 +124,6 @@ board specific portions as listed below.
 	dwmmc0@12200000 {
 		clock-frequency = <400000000>;
 		clock-freq-min-max = <400000 200000000>;
-		num-slots = <1>;
 		broken-cd;
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
@@ -139,7 +138,6 @@ board specific portions as listed below.
 	dwmmc0@12200000 {
 		clock-frequency = <400000000>;
 		clock-freq-min-max = <400000 200000000>;
-		num-slots = <1>;
 		broken-cd;
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;

Documentation/devicetree/bindings/mmc/zx-dw-mshc.txt

@@ -25,7 +25,6 @@ Example:
 		clock-frequency = <50000000>;
 		clocks = <&topcrm SD0_AHB>, <&topcrm SD0_WCLK>;
 		clock-names = "biu", "ciu";
-		num-slots = <1>;
 		max-frequency = <50000000>;
 		cap-sdio-irq;
 		cap-sd-highspeed;

Documentation/devicetree/bindings/net/brcm,amac.txt

@@ -11,6 +11,7 @@ Required properties:
  - reg-names:	Names of the registers.
 		"amac_base":	Address and length of the GMAC registers
 		"idm_base":	Address and length of the GMAC IDM registers
+				(required for NSP and Northstar2)
 		"nicpm_base":	Address and length of the NIC Port Manager
 				registers (required for Northstar2)
  - interrupts:	Interrupt number

Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt

@@ -1,24 +0,0 @@
-Broadcom GMAC Ethernet Controller Device Tree Bindings
--------------------------------------------------------------
-
-Required properties:
- - compatible:	"brcm,bgmac-nsp"
- - reg:		Address and length of the GMAC registers,
-		Address and length of the GMAC IDM registers
- - reg-names:	Names of the registers.  Must have both "gmac_base" and
-		"idm_base"
- - interrupts:	Interrupt number
-
-Optional properties:
-- mac-address:	See ethernet.txt file in the same directory
-
-Examples:
-
-gmac0: ethernet@18022000 {
-	compatible = "brcm,bgmac-nsp";
-	reg = <0x18022000 0x1000>,
-	      <0x18110000 0x1000>;
-	reg-names = "gmac_base", "idm_base";
-	interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-	status = "disabled";
-};

Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt

@@ -4,7 +4,7 @@ Required properties:
 - compatible: Should be one of the following.
   - "rockchip,rk3066a-efuse" - for RK3066a SoCs.
   - "rockchip,rk3188-efuse" - for RK3188 SoCs.
-  - "rockchip,rk322x-efuse" - for RK322x SoCs.
+  - "rockchip,rk3228-efuse" - for RK3228 SoCs.
   - "rockchip,rk3288-efuse" - for RK3288 SoCs.
   - "rockchip,rk3399-efuse" - for RK3399 SoCs.
 - reg: Should contain the registers location and exact eFuse size

Documentation/devicetree/bindings/ptp/brcm,ptp-dte.txt

@@ -1,13 +1,20 @@
-* Broadcom Digital Timing Engine(DTE) based PTP clock driver
+* Broadcom Digital Timing Engine(DTE) based PTP clock
 
 Required properties:
-- compatible: should be "brcm,ptp-dte"
+- compatible: should contain the core compatibility string
+              and the SoC compatibility string. The SoC
+              compatibility string is to handle SoC specific
+              hardware differences.
+              Core compatibility string:
+                 "brcm,ptp-dte"
+              SoC compatibility strings:
+                 "brcm,iproc-ptp-dte" - for iproc based SoC's
 - reg: address and length of the DTE block's NCO registers
 
 Example:
 
-ptp_dte: ptp_dte@180af650 {
-	compatible = "brcm,ptp-dte";
+ptp: ptp-dte@180af650 {
+	compatible = "brcm,iproc-ptp-dte", "brcm,ptp-dte";
 	reg = <0x180af650 0x10>;
 	status = "okay";
 };

Documentation/devicetree/bindings/serial/fsl-imx-uart.txt

@@ -9,7 +9,6 @@ Optional properties:
 - fsl,irda-mode : Indicate the uart supports irda mode
 - fsl,dte-mode : Indicate the uart works in DTE mode. The uart works
                   in DCE mode by default.
-- fsl,dma-size : Indicate the size of the DMA buffer and its periods
 
 Please check Documentation/devicetree/bindings/serial/serial.txt
 for the complete list of generic properties.
@@ -29,5 +28,4 @@ uart1: serial@73fbc000 {
 	interrupts = <31>;
 	uart-has-rtscts;
 	fsl,dte-mode;
-	fsl,dma-size = <1024 4>;
 };

Makefile

@@ -1,7 +1,7 @@
 VERSION = 4
 PATCHLEVEL = 13
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc3
 NAME = Fearless Coyote
 
 # *DOCUMENTATION*

arch/alpha/include/uapi/asm/ioctls.h

@@ -100,7 +100,7 @@
 #define TIOCGPKT	_IOR('T', 0x38, int) /* Get packet mode state */
 #define TIOCGPTLCK	_IOR('T', 0x39, int) /* Get Pty lock state */
 #define TIOCGEXCL	_IOR('T', 0x40, int) /* Get exclusive mode state */
-#define TIOCGPTPEER	_IOR('T', 0x41, int) /* Safely open the slave */
+#define TIOCGPTPEER	_IO('T', 0x41) /* Safely open the slave */
 
 #define TIOCSERCONFIG	0x5453
 #define TIOCSERGWILD	0x5454

arch/arc/mm/dma.c

@@ -117,7 +117,7 @@ static int arc_dma_mmap(struct device *dev, struct vm_area_struct *vma,
 
 	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
 
-	if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret))
+	if (dma_mmap_from_dev_coherent(dev, vma, cpu_addr, size, &ret))
 		return ret;
 
 	if (off < count && user_count <= (count - off)) {

arch/arm/include/asm/bug.h

@@ -37,7 +37,7 @@ do {								\
 		".pushsection .rodata.str, \"aMS\", %progbits, 1\n" \
 		"2:\t.asciz " #__file "\n" 			\
 		".popsection\n" 				\
-		".pushsection __bug_table,\"a\"\n"		\
+		".pushsection __bug_table,\"aw\"\n"		\
 		".align 2\n"					\
 		"3:\t.word 1b, 2b\n"				\
 		"\t.hword " #__line ", 0\n"			\

arch/arm/include/asm/cacheflush.h

@@ -116,7 +116,7 @@ struct cpu_cache_fns {
 	void (*dma_unmap_area)(const void *, size_t, int);
 
 	void (*dma_flush_range)(const void *, const void *);
-};
+} __no_randomize_layout;
 
 /*
  * Select the calling method

arch/arm/include/asm/kexec.h

@@ -19,6 +19,11 @@
 
 #ifndef __ASSEMBLY__
 
+#define ARCH_HAS_KIMAGE_ARCH
+struct kimage_arch {
+	u32 kernel_r2;
+};
+
 /**
  * crash_setup_regs() - save registers for the panic kernel
  * @newregs: registers are saved here

arch/arm/include/asm/ucontext.h

@@ -35,6 +35,12 @@ struct ucontext {
  * bytes, to prevent unpredictable padding in the signal frame.
  */
 
+/*
+ * Dummy padding block: if this magic is encountered, the block should
+ * be skipped using the corresponding size field.
+ */
+#define DUMMY_MAGIC		0xb0d9ed01
+
 #ifdef CONFIG_CRUNCH
 #define CRUNCH_MAGIC		0x5065cf03
 #define CRUNCH_STORAGE_SIZE	(CRUNCH_SIZE + 8)

arch/arm/kernel/machine_kexec.c

@@ -30,7 +30,6 @@ extern unsigned long kexec_boot_atags;
 
 static atomic_t waiting_for_crash_ipi;
 
-static unsigned long dt_mem;
 /*
  * Provide a dummy crash_notes definition while crash dump arrives to arm.
  * This prevents breakage of crash_notes attribute in kernel/ksysfs.c.
@@ -42,6 +41,9 @@ int machine_kexec_prepare(struct kimage *image)
 	__be32 header;
 	int i, err;
 
+	image->arch.kernel_r2 = image->start - KEXEC_ARM_ZIMAGE_OFFSET
+				     + KEXEC_ARM_ATAGS_OFFSET;
+
 	/*
 	 * Validate that if the current HW supports SMP, then the SW supports
 	 * and implements CPU hotplug for the current HW. If not, we won't be
@@ -66,8 +68,8 @@ int machine_kexec_prepare(struct kimage *image)
 		if (err)
 			return err;
 
-		if (be32_to_cpu(header) == OF_DT_HEADER)
-			dt_mem = current_segment->mem;
+		if (header == cpu_to_be32(OF_DT_HEADER))
+			image->arch.kernel_r2 = current_segment->mem;
 	}
 	return 0;
 }
@@ -165,8 +167,7 @@ void machine_kexec(struct kimage *image)
 	kexec_start_address = image->start;
 	kexec_indirection_page = page_list;
 	kexec_mach_type = machine_arch_type;
-	kexec_boot_atags = dt_mem ?: image->start - KEXEC_ARM_ZIMAGE_OFFSET
-				     + KEXEC_ARM_ATAGS_OFFSET;
+	kexec_boot_atags = image->arch.kernel_r2;
 
 	/* copy our kernel relocation code to the control code page */
 	reboot_entry = fncpy(reboot_code_buffer,

arch/arm/kernel/setup.c

@@ -987,6 +987,9 @@ static void __init reserve_crashkernel(void)
 
 	if (crash_base <= 0) {
 		unsigned long long crash_max = idmap_to_phys((u32)~0);
+		unsigned long long lowmem_max = __pa(high_memory - 1) + 1;
+		if (crash_max > lowmem_max)
+			crash_max = lowmem_max;
 		crash_base = memblock_find_in_range(CRASH_ALIGN, crash_max,
 						    crash_size, CRASH_ALIGN);
 		if (!crash_base) {

arch/arm/kernel/signal.c

@@ -40,8 +40,10 @@ static int preserve_crunch_context(struct crunch_sigframe __user *frame)
 	return __copy_to_user(frame, kframe, sizeof(*frame));
 }
 
-static int restore_crunch_context(struct crunch_sigframe __user *frame)
+static int restore_crunch_context(char __user **auxp)
 {
+	struct crunch_sigframe __user *frame =
+		(struct crunch_sigframe __user *)*auxp;
 	char kbuf[sizeof(*frame) + 8];
 	struct crunch_sigframe *kframe;
 
@@ -52,6 +54,7 @@ static int restore_crunch_context(struct crunch_sigframe __user *frame)
 	if (kframe->magic != CRUNCH_MAGIC ||
 	    kframe->size != CRUNCH_STORAGE_SIZE)
 		return -1;
+	*auxp += CRUNCH_STORAGE_SIZE;
 	crunch_task_restore(current_thread_info(), &kframe->storage);
 	return 0;
 }
@@ -59,21 +62,39 @@ static int restore_crunch_context(struct crunch_sigframe __user *frame)
 
 #ifdef CONFIG_IWMMXT
 
-static int preserve_iwmmxt_context(struct iwmmxt_sigframe *frame)
+static int preserve_iwmmxt_context(struct iwmmxt_sigframe __user *frame)
 {
 	char kbuf[sizeof(*frame) + 8];
 	struct iwmmxt_sigframe *kframe;
+	int err = 0;
 
 	/* the iWMMXt context must be 64 bit aligned */
 	kframe = (struct iwmmxt_sigframe *)((unsigned long)(kbuf + 8) & ~7);
-	kframe->magic = IWMMXT_MAGIC;
-	kframe->size = IWMMXT_STORAGE_SIZE;
-	iwmmxt_task_copy(current_thread_info(), &kframe->storage);
-	return __copy_to_user(frame, kframe, sizeof(*frame));
+
+	if (test_thread_flag(TIF_USING_IWMMXT)) {
+		kframe->magic = IWMMXT_MAGIC;
+		kframe->size = IWMMXT_STORAGE_SIZE;
+		iwmmxt_task_copy(current_thread_info(), &kframe->storage);
+
+		err = __copy_to_user(frame, kframe, sizeof(*frame));
+	} else {
+		/*
+		 * For bug-compatibility with older kernels, some space
+		 * has to be reserved for iWMMXt even if it's not used.
+		 * Set the magic and size appropriately so that properly
+		 * written userspace can skip it reliably:
+		 */
+		__put_user_error(DUMMY_MAGIC, &frame->magic, err);
+		__put_user_error(IWMMXT_STORAGE_SIZE, &frame->size, err);
+	}
+
+	return err;
 }
 
-static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame)
+static int restore_iwmmxt_context(char __user **auxp)
 {
+	struct iwmmxt_sigframe __user *frame =
+		(struct iwmmxt_sigframe __user *)*auxp;
 	char kbuf[sizeof(*frame) + 8];
 	struct iwmmxt_sigframe *kframe;
 
@@ -81,10 +102,28 @@ static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame)
 	kframe = (struct iwmmxt_sigframe *)((unsigned long)(kbuf + 8) & ~7);
 	if (__copy_from_user(kframe, frame, sizeof(*frame)))
 		return -1;
-	if (kframe->magic != IWMMXT_MAGIC ||
-	    kframe->size != IWMMXT_STORAGE_SIZE)
+
+	/*
+	 * For non-iWMMXt threads: a single iwmmxt_sigframe-sized dummy
+	 * block is discarded for compatibility with setup_sigframe() if
+	 * present, but we don't mandate its presence.  If some other
+	 * magic is here, it's not for us:
+	 */
+	if (!test_thread_flag(TIF_USING_IWMMXT) &&
+	    kframe->magic != DUMMY_MAGIC)
+		return 0;
+
+	if (kframe->size != IWMMXT_STORAGE_SIZE)
 		return -1;
-	iwmmxt_task_restore(current_thread_info(), &kframe->storage);
+
+	if (test_thread_flag(TIF_USING_IWMMXT)) {
+		if (kframe->magic != IWMMXT_MAGIC)
+			return -1;
+
+		iwmmxt_task_restore(current_thread_info(), &kframe->storage);
+	}
+
+	*auxp += IWMMXT_STORAGE_SIZE;
 	return 0;
 }
 
@@ -107,8 +146,10 @@ static int preserve_vfp_context(struct vfp_sigframe __user *frame)
 	return vfp_preserve_user_clear_hwstate(&frame->ufp, &frame->ufp_exc);
 }
 
-static int restore_vfp_context(struct vfp_sigframe __user *frame)
+static int restore_vfp_context(char __user **auxp)
 {
+	struct vfp_sigframe __user *frame =
+		(struct vfp_sigframe __user *)*auxp;
 	unsigned long magic;
 	unsigned long size;
 	int err = 0;
@@ -121,6 +162,7 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame)
 	if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
 		return -EINVAL;
 
+	*auxp += size;
 	return vfp_restore_user_hwstate(&frame->ufp, &frame->ufp_exc);
 }
 
@@ -141,7 +183,7 @@ struct rt_sigframe {
 
 static int restore_sigframe(struct pt_regs *regs, struct sigframe __user *sf)
 {
-	struct aux_sigframe __user *aux;
+	char __user *aux;
 	sigset_t set;
 	int err;
 
@@ -169,18 +211,18 @@ static int restore_sigframe(struct pt_regs *regs, struct sigframe __user *sf)
 
 	err |= !valid_user_regs(regs);
 
-	aux = (struct aux_sigframe __user *) sf->uc.uc_regspace;
+	aux = (char __user *) sf->uc.uc_regspace;
 #ifdef CONFIG_CRUNCH
 	if (err == 0)
-		err |= restore_crunch_context(&aux->crunch);
+		err |= restore_crunch_context(&aux);
 #endif
 #ifdef CONFIG_IWMMXT
-	if (err == 0 && test_thread_flag(TIF_USING_IWMMXT))
-		err |= restore_iwmmxt_context(&aux->iwmmxt);
+	if (err == 0)
+		err |= restore_iwmmxt_context(&aux);
 #endif
 #ifdef CONFIG_VFP
 	if (err == 0)
-		err |= restore_vfp_context(&aux->vfp);
+		err |= restore_vfp_context(&aux);
 #endif
 
 	return err;
@@ -286,7 +328,7 @@ setup_sigframe(struct sigframe __user *sf, struct pt_regs *regs, sigset_t *set)
 		err |= preserve_crunch_context(&aux->crunch);
 #endif
 #ifdef CONFIG_IWMMXT
-	if (err == 0 && test_thread_flag(TIF_USING_IWMMXT))
+	if (err == 0)
 		err |= preserve_iwmmxt_context(&aux->iwmmxt);
 #endif
 #ifdef CONFIG_VFP

arch/arm/mach-omap2/hsmmc.c

@@ -32,120 +32,6 @@ static u16 control_devconf1_offset;
 
 #define HSMMC_NAME_LEN	9
 
-static void omap_hsmmc1_before_set_reg(struct device *dev,
-				       int power_on, int vdd)
-{
-	u32 reg, prog_io;
-	struct omap_hsmmc_platform_data *mmc = dev->platform_data;
-
-	if (mmc->remux)
-		mmc->remux(dev, power_on);
-
-	/*
-	 * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
-	 * card with Vcc regulator (from twl4030 or whatever).  OMAP has both
-	 * 1.8V and 3.0V modes, controlled by the PBIAS register.
-	 *
-	 * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which
-	 * is most naturally TWL VSIM; those pins also use PBIAS.
-	 *
-	 * FIXME handle VMMC1A as needed ...
-	 */
-	if (power_on) {
-		if (cpu_is_omap2430()) {
-			reg = omap_ctrl_readl(OMAP243X_CONTROL_DEVCONF1);
-			if ((1 << vdd) >= MMC_VDD_30_31)
-				reg |= OMAP243X_MMC1_ACTIVE_OVERWRITE;
-			else
-				reg &= ~OMAP243X_MMC1_ACTIVE_OVERWRITE;
-			omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1);
-		}
-
-		if (mmc->internal_clock) {
-			reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
-			reg |= OMAP2_MMCSDIO1ADPCLKISEL;
-			omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0);
-		}
-
-		reg = omap_ctrl_readl(control_pbias_offset);
-		if (cpu_is_omap3630()) {
-			/* Set MMC I/O to 52MHz */
-			prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
-			prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL;
-			omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1);
-		} else {
-			reg |= OMAP2_PBIASSPEEDCTRL0;
-		}
-		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
-		omap_ctrl_writel(reg, control_pbias_offset);
-	} else {
-		reg = omap_ctrl_readl(control_pbias_offset);
-		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
-		omap_ctrl_writel(reg, control_pbias_offset);
-	}
-}
-
-static void omap_hsmmc1_after_set_reg(struct device *dev, int power_on, int vdd)
-{
-	u32 reg;
-
-	/* 100ms delay required for PBIAS configuration */
-	msleep(100);
-
-	if (power_on) {
-		reg = omap_ctrl_readl(control_pbias_offset);
-		reg |= (OMAP2_PBIASLITEPWRDNZ0 | OMAP2_PBIASSPEEDCTRL0);
-		if ((1 << vdd) <= MMC_VDD_165_195)
-			reg &= ~OMAP2_PBIASLITEVMODE0;
-		else
-			reg |= OMAP2_PBIASLITEVMODE0;
-		omap_ctrl_writel(reg, control_pbias_offset);
-	} else {
-		reg = omap_ctrl_readl(control_pbias_offset);
-		reg |= (OMAP2_PBIASSPEEDCTRL0 | OMAP2_PBIASLITEPWRDNZ0 |
-			OMAP2_PBIASLITEVMODE0);
-		omap_ctrl_writel(reg, control_pbias_offset);
-	}
-}
-
-static void hsmmc2_select_input_clk_src(struct omap_hsmmc_platform_data *mmc)
-{
-	u32 reg;
-
-	reg = omap_ctrl_readl(control_devconf1_offset);
-	if (mmc->internal_clock)
-		reg |= OMAP2_MMCSDIO2ADPCLKISEL;
-	else
-		reg &= ~OMAP2_MMCSDIO2ADPCLKISEL;
-	omap_ctrl_writel(reg, control_devconf1_offset);
-}
-
-static void hsmmc2_before_set_reg(struct device *dev, int power_on, int vdd)
-{
-	struct omap_hsmmc_platform_data *mmc = dev->platform_data;
-
-	if (mmc->remux)
-		mmc->remux(dev, power_on);
-
-	if (power_on)
-		hsmmc2_select_input_clk_src(mmc);
-}
-
-static int am35x_hsmmc2_set_power(struct device *dev, int power_on, int vdd)
-{
-	struct omap_hsmmc_platform_data *mmc = dev->platform_data;
-
-	if (power_on)
-		hsmmc2_select_input_clk_src(mmc);
-
-	return 0;
-}
-
-static int nop_mmc_set_power(struct device *dev, int power_on, int vdd)
-{
-	return 0;
-}
-
 static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 					struct omap_hsmmc_platform_data *mmc)
 {
@@ -157,101 +43,11 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
 		return -ENOMEM;
 	}
 
-	if (c->name)
-		strncpy(hc_name, c->name, HSMMC_NAME_LEN);
-	else
-		snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i",
-								c->mmc, 1);
+	snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i", c->mmc, 1);
 	mmc->name = hc_name;
 	mmc->caps = c->caps;
-	mmc->internal_clock = !c->ext_clock;
 	mmc->reg_offset = 0;
 
-	if (c->cover_only) {
-		/* detect if mobile phone cover removed */
-		mmc->gpio_cd = -EINVAL;
-		mmc->gpio_cod = c->gpio_cd;
-	} else {
-		/* card detect pin on the mmc socket itself */
-		mmc->gpio_cd = c->gpio_cd;
-		mmc->gpio_cod = -EINVAL;
-	}
-	mmc->gpio_wp = c->gpio_wp;
-
-	mmc->remux = c->remux;
-	mmc->init_card = c->init_card;
-
-	if (c->nonremovable)
-		mmc->nonremovable = 1;
-
-	/*
-	 * NOTE:  MMC slots should have a Vcc regulator set up.
-	 * This may be from a TWL4030-family chip, another
-	 * controllable regulator, or a fixed supply.
-	 *
-	 * temporary HACK: ocr_mask instead of fixed supply
-	 */
-	if (soc_is_am35xx())
-		mmc->ocr_mask = MMC_VDD_165_195 |
-					 MMC_VDD_26_27 |
-					 MMC_VDD_27_28 |
-					 MMC_VDD_29_30 |
-					 MMC_VDD_30_31 |
-					 MMC_VDD_31_32;
-	else
-		mmc->ocr_mask = c->ocr_mask;
-
-	if (!soc_is_am35xx())
-		mmc->features |= HSMMC_HAS_PBIAS;
-
-	switch (c->mmc) {
-	case 1:
-		if (mmc->features & HSMMC_HAS_PBIAS) {
-			/* on-chip level shifting via PBIAS0/PBIAS1 */
-			mmc->before_set_reg =
-					omap_hsmmc1_before_set_reg;
-			mmc->after_set_reg =
-					omap_hsmmc1_after_set_reg;
-		}
-
-		if (soc_is_am35xx())
-			mmc->set_power = nop_mmc_set_power;
-
-		/* OMAP3630 HSMMC1 supports only 4-bit */
-		if (cpu_is_omap3630() &&
-				(c->caps & MMC_CAP_8_BIT_DATA)) {
-			c->caps &= ~MMC_CAP_8_BIT_DATA;
-			c->caps |= MMC_CAP_4_BIT_DATA;
-			mmc->caps = c->caps;
-		}
-		break;
-	case 2:
-		if (soc_is_am35xx())
-			mmc->set_power = am35x_hsmmc2_set_power;
-
-		if (c->ext_clock)
-			c->transceiver = 1;
-		if (c->transceiver && (c->caps & MMC_CAP_8_BIT_DATA)) {
-			c->caps &= ~MMC_CAP_8_BIT_DATA;
-			c->caps |= MMC_CAP_4_BIT_DATA;
-		}
-		if (mmc->features & HSMMC_HAS_PBIAS) {
-			/* off-chip level shifting, or none */
-			mmc->before_set_reg = hsmmc2_before_set_reg;
-			mmc->after_set_reg = NULL;
-		}
-		break;
-	case 3:
-	case 4:
-	case 5:
-		mmc->before_set_reg = NULL;
-		mmc->after_set_reg = NULL;
-		break;
-	default:
-		pr_err("MMC%d configuration not supported!\n", c->mmc);
-		kfree(hc_name);
-		return -ENODEV;
-	}
 	return 0;
 }
 
@@ -260,7 +56,6 @@ static int omap_hsmmc_done;
 void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
 {
 	struct platform_device *pdev;
-	struct omap_hsmmc_platform_data *mmc_pdata;
 	int res;
 
 	if (omap_hsmmc_done != 1)
@@ -269,32 +64,12 @@ void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
 	omap_hsmmc_done++;
 
 	for (; c->mmc; c++) {
-		if (!c->deferred)
-			continue;
-
 		pdev = c->pdev;
 		if (!pdev)
 			continue;
-
-		mmc_pdata = pdev->dev.platform_data;
-		if (!mmc_pdata)
-			continue;
-
-		if (c->cover_only) {
-			/* detect if mobile phone cover removed */
-			mmc_pdata->gpio_cd = -EINVAL;
-			mmc_pdata->gpio_cod = c->gpio_cd;
-		} else {
-			/* card detect pin on the mmc socket itself */
-			mmc_pdata->gpio_cd = c->gpio_cd;
-			mmc_pdata->gpio_cod = -EINVAL;
-		}
-		mmc_pdata->gpio_wp = c->gpio_wp;
-
 		res = omap_device_register(pdev);
 		if (res)
-			pr_err("Could not late init MMC %s\n",
-			       c->name);
+			pr_err("Could not late init MMC\n");
 	}
 }
 
@@ -336,13 +111,6 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo,
 	if (oh->dev_attr != NULL) {
 		mmc_dev_attr = oh->dev_attr;
 		mmc_data->controller_flags = mmc_dev_attr->flags;
-		/*
-		 * erratum 2.1.1.128 doesn't apply if board has
-		 * a transceiver is attached
-		 */
-		if (hsmmcinfo->transceiver)
-			mmc_data->controller_flags &=
-				~OMAP_HSMMC_BROKEN_MULTIBLOCK_READ;
 	}
 
 	pdev = platform_device_alloc(name, ctrl_nr - 1);
@@ -367,9 +135,6 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo,
 
 	hsmmcinfo->pdev = pdev;
 
-	if (hsmmcinfo->deferred)
-		goto free_mmc;
-
 	res = omap_device_register(pdev);
 	if (res) {
 		pr_err("Could not register od for %s\n", name);

arch/arm/mach-omap2/hsmmc.h

@@ -12,18 +12,9 @@ struct omap2_hsmmc_info {
 	u8	mmc;		/* controller 1/2/3 */
 	u32	caps;		/* 4/8 wires and any additional host
 				 * capabilities OR'd (ref. linux/mmc/host.h) */
-	bool	transceiver;	/* MMC-2 option */
-	bool	ext_clock;	/* use external pin for input clock */
-	bool	cover_only;	/* No card detect - just cover switch */
-	bool	nonremovable;	/* Nonremovable e.g. eMMC */
-	bool	deferred;	/* mmc needs a deferred probe */
 	int	gpio_cd;	/* or -EINVAL */
 	int	gpio_wp;	/* or -EINVAL */
-	char	*name;		/* or NULL for default */
 	struct platform_device *pdev;	/* mmc controller instance */
-	int	ocr_mask;	/* temporary HACK */
-	/* Remux (pad configuration) when powering on/off */
-	void (*remux)(struct device *dev, int power_on);
 	/* init some special card */
 	void (*init_card)(struct mmc_card *card);
 };

arch/arm/mach-ux500/cpu-db8500.c

@@ -133,6 +133,7 @@ static irqreturn_t db8500_pmu_handler(int irq, void *dev, irq_handler_t handler)
 
 static struct arm_pmu_platdata db8500_pmu_platdata = {
 	.handle_irq		= db8500_pmu_handler,
+	.irq_flags		= IRQF_NOBALANCING | IRQF_NO_THREAD,
 };
 
 static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {

arch/arm/mm/dma-mapping-nommu.c

@@ -40,9 +40,21 @@ static void *arm_nommu_dma_alloc(struct device *dev, size_t size,
 
 {
 	const struct dma_map_ops *ops = &dma_noop_ops;
+	void *ret;
 
 	/*
-	 * We are here because:
+	 * Try generic allocator first if we are advertised that
+	 * consistency is not required.
+	 */
+
+	if (attrs & DMA_ATTR_NON_CONSISTENT)
+		return ops->alloc(dev, size, dma_handle, gfp, attrs);
+
+	ret = dma_alloc_from_global_coherent(size, dma_handle);
+
+	/*
+	 * dma_alloc_from_global_coherent() may fail because:
+	 *
 	 * - no consistent DMA region has been defined, so we can't
 	 *   continue.
 	 * - there is no space left in consistent DMA region, so we
@@ -50,11 +62,8 @@ static void *arm_nommu_dma_alloc(struct device *dev, size_t size,
 	 *   advertised that consistency is not required.
 	 */
 
-	if (attrs & DMA_ATTR_NON_CONSISTENT)
-		return ops->alloc(dev, size, dma_handle, gfp, attrs);
-
-	WARN_ON_ONCE(1);
-	return NULL;
+	WARN_ON_ONCE(ret == NULL);
+	return ret;
 }
 
 static void arm_nommu_dma_free(struct device *dev, size_t size,
@@ -63,14 +72,31 @@ static void arm_nommu_dma_free(struct device *dev, size_t size,
 {
 	const struct dma_map_ops *ops = &dma_noop_ops;
 
-	if (attrs & DMA_ATTR_NON_CONSISTENT)
+	if (attrs & DMA_ATTR_NON_CONSISTENT) {
 		ops->free(dev, size, cpu_addr, dma_addr, attrs);
-	else
-		WARN_ON_ONCE(1);
+	} else {
+		int ret = dma_release_from_global_coherent(get_order(size),
+							   cpu_addr);
+
+		WARN_ON_ONCE(ret == 0);
+	}
 
 	return;
 }
 
+static int arm_nommu_dma_mmap(struct device *dev, struct vm_area_struct *vma,
+			      void *cpu_addr, dma_addr_t dma_addr, size_t size,
+			      unsigned long attrs)
+{
+	int ret;
+
+	if (dma_mmap_from_global_coherent(vma, cpu_addr, size, &ret))
+		return ret;
+
+	return dma_common_mmap(dev, vma, cpu_addr, dma_addr, size);
+}
+
+
 static void __dma_page_cpu_to_dev(phys_addr_t paddr, size_t size,
 				  enum dma_data_direction dir)
 {
@@ -173,6 +199,7 @@ static void arm_nommu_dma_sync_sg_for_cpu(struct device *dev, struct scatterlist
 const struct dma_map_ops arm_nommu_dma_ops = {
 	.alloc			= arm_nommu_dma_alloc,
 	.free			= arm_nommu_dma_free,
+	.mmap			= arm_nommu_dma_mmap,
 	.map_page		= arm_nommu_dma_map_page,
 	.unmap_page		= arm_nommu_dma_unmap_page,
 	.map_sg			= arm_nommu_dma_map_sg,

arch/arm/mm/dma-mapping.c

@@ -851,7 +851,7 @@ static int __arm_dma_mmap(struct device *dev, struct vm_area_struct *vma,
 	unsigned long pfn = dma_to_pfn(dev, dma_addr);
 	unsigned long off = vma->vm_pgoff;
 
-	if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret))
+	if (dma_mmap_from_dev_coherent(dev, vma, cpu_addr, size, &ret))
 		return ret;
 
 	if (off < nr_pages && nr_vma_pages <= (nr_pages - off)) {

arch/arm64/include/asm/atomic_lse.h

@@ -435,7 +435,7 @@ static inline long atomic64_dec_if_positive(atomic64_t *v)
 	"	sub	x30, x30, %[ret]\n"
 	"	cbnz	x30, 1b\n"
 	"2:")
-	: [ret] "+&r" (x0), [v] "+Q" (v->counter)
+	: [ret] "+r" (x0), [v] "+Q" (v->counter)
 	:
 	: __LL_SC_CLOBBERS, "cc", "memory");
 

arch/arm64/include/asm/bug.h

@@ -36,7 +36,7 @@
 #ifdef CONFIG_GENERIC_BUG
 
 #define __BUG_ENTRY(flags) 				\
-		".pushsection __bug_table,\"a\"\n\t"	\
+		".pushsection __bug_table,\"aw\"\n\t"	\
 		".align 2\n\t"				\
 	"0:	.long 1f - 0b\n\t"			\
 _BUGVERBOSE_LOCATION(__FILE__, __LINE__)		\

arch/arm64/include/asm/sysreg.h

@@ -492,7 +492,7 @@ asm(
  * the "%x0" template means XZR.
  */
 #define write_sysreg(v, r) do {					\
-	u64 __val = (u64)v;					\
+	u64 __val = (u64)(v);					\
 	asm volatile("msr " __stringify(r) ", %x0"		\
 		     : : "rZ" (__val));				\
 } while (0)
@@ -508,7 +508,7 @@ asm(
 })
 
 #define write_sysreg_s(v, r) do {					\
-	u64 __val = (u64)v;						\
+	u64 __val = (u64)(v);						\
 	asm volatile("msr_s " __stringify(r) ", %x0" : : "rZ" (__val));	\
 } while (0)
 

arch/arm64/include/asm/uaccess.h

@@ -69,7 +69,7 @@ static inline void set_fs(mm_segment_t fs)
  */
 #define __range_ok(addr, size)						\
 ({									\
-	unsigned long __addr = (unsigned long __force)(addr);		\
+	unsigned long __addr = (unsigned long)(addr);			\
 	unsigned long flag, roksum;					\
 	__chk_user_ptr(addr);						\
 	asm("adds %1, %1, %3; ccmp %1, %4, #2, cc; cset %0, ls"		\

arch/arm64/kernel/cpu_ops.c

@@ -82,8 +82,8 @@ static const char *__init cpu_read_enable_method(int cpu)
 			 * Don't warn spuriously.
 			 */
 			if (cpu != 0)
-				pr_err("%s: missing enable-method property\n",
-					dn->full_name);
+				pr_err("%pOF: missing enable-method property\n",
+					dn);
 		}
 	} else {
 		enable_method = acpi_get_enable_method(cpu);

arch/arm64/kernel/smp.c

@@ -469,7 +469,7 @@ static u64 __init of_get_cpu_mpidr(struct device_node *dn)
 	 */
 	cell = of_get_property(dn, "reg", NULL);
 	if (!cell) {
-		pr_err("%s: missing reg property\n", dn->full_name);
+		pr_err("%pOF: missing reg property\n", dn);
 		return INVALID_HWID;
 	}
 
@@ -478,7 +478,7 @@ static u64 __init of_get_cpu_mpidr(struct device_node *dn)
 	 * Non affinity bits must be set to 0 in the DT
 	 */
 	if (hwid & ~MPIDR_HWID_BITMASK) {
-		pr_err("%s: invalid reg property\n", dn->full_name);
+		pr_err("%pOF: invalid reg property\n", dn);
 		return INVALID_HWID;
 	}
 	return hwid;
@@ -627,8 +627,8 @@ static void __init of_parse_and_init_cpus(void)
 			goto next;
 
 		if (is_mpidr_duplicate(cpu_count, hwid)) {
-			pr_err("%s: duplicate cpu reg properties in the DT\n",
-				dn->full_name);
+			pr_err("%pOF: duplicate cpu reg properties in the DT\n",
+				dn);
 			goto next;
 		}
 
@@ -640,8 +640,8 @@ static void __init of_parse_and_init_cpus(void)
 		 */
 		if (hwid == cpu_logical_map(0)) {
 			if (bootcpu_valid) {
-				pr_err("%s: duplicate boot cpu reg property in DT\n",
-					dn->full_name);
+				pr_err("%pOF: duplicate boot cpu reg property in DT\n",
+					dn);
 				goto next;
 			}
 

arch/arm64/kernel/topology.c

@@ -45,7 +45,7 @@ static int __init get_cpu_for_node(struct device_node *node)
 		}
 	}
 
-	pr_crit("Unable to find CPU node for %s\n", cpu_node->full_name);
+	pr_crit("Unable to find CPU node for %pOF\n", cpu_node);
 
 	of_node_put(cpu_node);
 	return -1;
@@ -71,8 +71,8 @@ static int __init parse_core(struct device_node *core, int cluster_id,
 				cpu_topology[cpu].core_id = core_id;
 				cpu_topology[cpu].thread_id = i;
 			} else {
-				pr_err("%s: Can't get CPU for thread\n",
-				       t->full_name);
+				pr_err("%pOF: Can't get CPU for thread\n",
+				       t);
 				of_node_put(t);
 				return -EINVAL;
 			}
@@ -84,15 +84,15 @@ static int __init parse_core(struct device_node *core, int cluster_id,
 	cpu = get_cpu_for_node(core);
 	if (cpu >= 0) {
 		if (!leaf) {
-			pr_err("%s: Core has both threads and CPU\n",
-			       core->full_name);
+			pr_err("%pOF: Core has both threads and CPU\n",
+			       core);
 			return -EINVAL;
 		}
 
 		cpu_topology[cpu].cluster_id = cluster_id;
 		cpu_topology[cpu].core_id = core_id;
 	} else if (leaf) {
-		pr_err("%s: Can't get CPU for leaf core\n", core->full_name);
+		pr_err("%pOF: Can't get CPU for leaf core\n", core);
 		return -EINVAL;
 	}
 
@@ -137,8 +137,8 @@ static int __init parse_cluster(struct device_node *cluster, int depth)
 			has_cores = true;
 
 			if (depth == 0) {
-				pr_err("%s: cpu-map children should be clusters\n",
-				       c->full_name);
+				pr_err("%pOF: cpu-map children should be clusters\n",
+				       c);
 				of_node_put(c);
 				return -EINVAL;
 			}
@@ -146,8 +146,8 @@ static int __init parse_cluster(struct device_node *cluster, int depth)
 			if (leaf) {
 				ret = parse_core(c, cluster_id, core_id++);
 			} else {
-				pr_err("%s: Non-leaf cluster with core %s\n",
-				       cluster->full_name, name);
+				pr_err("%pOF: Non-leaf cluster with core %s\n",
+				       cluster, name);
 				ret = -EINVAL;
 			}
 
@@ -159,7 +159,7 @@ static int __init parse_cluster(struct device_node *cluster, int depth)
 	} while (c);
 
 	if (leaf && !has_cores)
-		pr_warn("%s: empty cluster\n", cluster->full_name);
+		pr_warn("%pOF: empty cluster\n", cluster);
 
 	if (leaf)
 		cluster_id++;

arch/arm64/kernel/traps.c

@@ -274,10 +274,12 @@ static DEFINE_RAW_SPINLOCK(die_lock);
 void die(const char *str, struct pt_regs *regs, int err)
 {
 	int ret;
+	unsigned long flags;
+
+	raw_spin_lock_irqsave(&die_lock, flags);
 
 	oops_enter();
 
-	raw_spin_lock_irq(&die_lock);
 	console_verbose();
 	bust_spinlocks(1);
 	ret = __die(str, err, regs);
@@ -287,13 +289,15 @@ void die(const char *str, struct pt_regs *regs, int err)
 
 	bust_spinlocks(0);
 	add_taint(TAINT_DIE, LOCKDEP_NOW_UNRELIABLE);
-	raw_spin_unlock_irq(&die_lock);
 	oops_exit();
 
 	if (in_interrupt())
 		panic("Fatal exception in interrupt");
 	if (panic_on_oops)
 		panic("Fatal exception");
+
+	raw_spin_unlock_irqrestore(&die_lock, flags);
+
 	if (ret != NOTIFY_STOP)
 		do_exit(SIGSEGV);
 }

arch/arm64/lib/copy_page.S

@@ -30,9 +30,10 @@
  */
 ENTRY(copy_page)
 alternative_if ARM64_HAS_NO_HW_PREFETCH
-	# Prefetch two cache lines ahead.
-	prfm    pldl1strm, [x1, #128]
-	prfm    pldl1strm, [x1, #256]
+	// Prefetch three cache lines ahead.
+	prfm	pldl1strm, [x1, #128]
+	prfm	pldl1strm, [x1, #256]
+	prfm	pldl1strm, [x1, #384]
 alternative_else_nop_endif
 
 	ldp	x2, x3, [x1]
@@ -50,7 +51,7 @@ alternative_else_nop_endif
 	subs	x18, x18, #128
 
 alternative_if ARM64_HAS_NO_HW_PREFETCH
-	prfm    pldl1strm, [x1, #384]
+	prfm	pldl1strm, [x1, #384]
 alternative_else_nop_endif
 
 	stnp	x2, x3, [x0]

arch/arm64/mm/dma-mapping.c

@@ -329,7 +329,7 @@ static int __swiotlb_mmap(struct device *dev,
 	vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot,
 					     is_device_dma_coherent(dev));
 
-	if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret))
+	if (dma_mmap_from_dev_coherent(dev, vma, cpu_addr, size, &ret))
 		return ret;
 
 	return __swiotlb_mmap_pfn(vma, pfn, size);
@@ -706,7 +706,7 @@ static int __iommu_mmap_attrs(struct device *dev, struct vm_area_struct *vma,
 	vma->vm_page_prot = __get_dma_pgprot(attrs, vma->vm_page_prot,
 					     is_device_dma_coherent(dev));
 
-	if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret))
+	if (dma_mmap_from_dev_coherent(dev, vma, cpu_addr, size, &ret))
 		return ret;
 
 	if (attrs & DMA_ATTR_FORCE_CONTIGUOUS) {

arch/arm64/mm/mmu.c

@@ -496,7 +496,7 @@ void mark_rodata_ro(void)
 
 static void __init map_kernel_segment(pgd_t *pgd, void *va_start, void *va_end,
 				      pgprot_t prot, struct vm_struct *vma,
-				      int flags)
+				      int flags, unsigned long vm_flags)
 {
 	phys_addr_t pa_start = __pa_symbol(va_start);
 	unsigned long size = va_end - va_start;
@@ -507,10 +507,13 @@ static void __init map_kernel_segment(pgd_t *pgd, void *va_start, void *va_end,
 	__create_pgd_mapping(pgd, pa_start, (unsigned long)va_start, size, prot,
 			     early_pgtable_alloc, flags);
 
+	if (!(vm_flags & VM_NO_GUARD))
+		size += PAGE_SIZE;
+
 	vma->addr	= va_start;
 	vma->phys_addr	= pa_start;
 	vma->size	= size;
-	vma->flags	= VM_MAP;
+	vma->flags	= VM_MAP | vm_flags;
 	vma->caller	= __builtin_return_address(0);
 
 	vm_area_add_early(vma);
@@ -541,14 +544,15 @@ static void __init map_kernel(pgd_t *pgd)
 	 * Only rodata will be remapped with different permissions later on,
 	 * all other segments are allowed to use contiguous mappings.
 	 */
-	map_kernel_segment(pgd, _text, _etext, text_prot, &vmlinux_text, 0);
+	map_kernel_segment(pgd, _text, _etext, text_prot, &vmlinux_text, 0,
+			   VM_NO_GUARD);
 	map_kernel_segment(pgd, __start_rodata, __inittext_begin, PAGE_KERNEL,
-			   &vmlinux_rodata, NO_CONT_MAPPINGS);
+			   &vmlinux_rodata, NO_CONT_MAPPINGS, VM_NO_GUARD);
 	map_kernel_segment(pgd, __inittext_begin, __inittext_end, text_prot,
-			   &vmlinux_inittext, 0);
+			   &vmlinux_inittext, 0, VM_NO_GUARD);
 	map_kernel_segment(pgd, __initdata_begin, __initdata_end, PAGE_KERNEL,
-			   &vmlinux_initdata, 0);
-	map_kernel_segment(pgd, _data, _end, PAGE_KERNEL, &vmlinux_data, 0);
+			   &vmlinux_initdata, 0, VM_NO_GUARD);
+	map_kernel_segment(pgd, _data, _end, PAGE_KERNEL, &vmlinux_data, 0, 0);
 
 	if (!pgd_val(*pgd_offset_raw(pgd, FIXADDR_START))) {
 		/*

arch/arm64/mm/numa.c

@@ -208,8 +208,6 @@ int __init numa_add_memblk(int nid, u64 start, u64 end)
 	}
 
 	node_set(nid, numa_nodes_parsed);
-	pr_info("Adding memblock [0x%llx - 0x%llx] on node %d\n",
-			start, (end - 1), nid);
 	return ret;
 }
 
@@ -223,10 +221,7 @@ static void __init setup_node_data(int nid, u64 start_pfn, u64 end_pfn)
 	void *nd;
 	int tnid;
 
-	if (start_pfn < end_pfn)
-		pr_info("Initmem setup node %d [mem %#010Lx-%#010Lx]\n", nid,
-			start_pfn << PAGE_SHIFT, (end_pfn << PAGE_SHIFT) - 1);
-	else
+	if (start_pfn >= end_pfn)
 		pr_info("Initmem setup node %d [<memory-less node>]\n", nid);
 
 	nd_pa = memblock_alloc_try_nid(nd_size, SMP_CACHE_BYTES, nid);

arch/blackfin/include/asm/bug.h

@@ -21,7 +21,7 @@
 #define _BUG_OR_WARN(flags)						\
 	asm volatile(							\
 		"1:	.hword	%0\n"					\
-		"	.section __bug_table,\"a\",@progbits\n"		\
+		"	.section __bug_table,\"aw\",@progbits\n"	\
 		"2:	.long	1b\n"					\
 		"	.long	%1\n"					\
 		"	.short	%2\n"					\
@@ -38,7 +38,7 @@
 #define _BUG_OR_WARN(flags)						\
 	asm volatile(							\
 		"1:	.hword	%0\n"					\
-		"	.section __bug_table,\"a\",@progbits\n"		\
+		"	.section __bug_table,\"aw\",@progbits\n"	\
 		"2:	.long	1b\n"					\
 		"	.short	%1\n"					\
 		"	.org	2b + %2\n"				\

arch/blackfin/include/asm/flat.h

@@ -44,8 +44,7 @@ flat_get_relocate_addr (unsigned long relval)
 	return relval & 0x03ffffff; /* Mask out top 6 bits */
 }
 
-static inline int flat_set_persistent(unsigned long relval,
-				      unsigned long *persistent)
+static inline int flat_set_persistent(u32 relval, u32 *persistent)
 {
 	int type = (relval >> 26) & 7;
 	if (type == 3) {

arch/blackfin/kernel/flat.c

@@ -32,7 +32,7 @@ unsigned long bfin_get_addr_from_rp(u32 *ptr,
 		break;
 
 	case FLAT_BFIN_RELOC_TYPE_32_BIT:
-		pr_debug("*ptr = %lx", get_unaligned(ptr));
+		pr_debug("*ptr = %x", get_unaligned(ptr));
 		val = get_unaligned(ptr);
 		break;
 
@@ -77,7 +77,7 @@ void bfin_put_addr_at_rp(u32 *ptr, u32 addr, u32 relval)
 
 	case FLAT_BFIN_RELOC_TYPE_32_BIT:
 		put_unaligned(addr, ptr);
-		pr_debug("new ptr =%lx", get_unaligned(ptr));
+		pr_debug("new ptr =%x", get_unaligned(ptr));
 		break;
 	}
 }

arch/h8300/include/asm/flat.h

@@ -24,7 +24,7 @@ static inline int flat_get_addr_from_rp(u32 __user *rp, u32 relval, u32 flags,
 					u32 *addr, u32 *persistent)
 {
 	u32 val = get_unaligned((__force u32 *)rp);
-	if (!(flags & FLAT_FLAG_GOTPIC)
+	if (!(flags & FLAT_FLAG_GOTPIC))
 		val &= 0x00ffffff;
 	*addr = val;
 	return 0;

arch/m68k/include/asm/flat.h

@@ -30,8 +30,7 @@ static inline int flat_put_addr_at_rp(u32 __user *rp, u32 addr, u32 rel)
 }
 #define	flat_get_relocate_addr(rel)		(rel)
 
-static inline int flat_set_persistent(unsigned long relval,
-				      unsigned long *persistent)
+static inline int flat_set_persistent(u32 relval, u32 *persistent)
 {
 	return 0;
 }

arch/mips/include/uapi/asm/ioctls.h

@@ -91,7 +91,7 @@
 #define TIOCGPKT	_IOR('T', 0x38, int) /* Get packet mode state */
 #define TIOCGPTLCK	_IOR('T', 0x39, int) /* Get Pty lock state */
 #define TIOCGEXCL	_IOR('T', 0x40, int) /* Get exclusive mode state */
-#define TIOCGPTPEER	_IOR('T', 0x41, int) /* Safely open the slave */
+#define TIOCGPTPEER	_IO('T', 0x41) /* Safely open the slave */
 
 /* I hope the range from 0x5480 on is free ... */
 #define TIOCSCTTY	0x5480		/* become controlling tty */

arch/mips/mm/dma-default.c

@@ -232,7 +232,7 @@ static int mips_dma_mmap(struct device *dev, struct vm_area_struct *vma,
 	else
 		vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
 
-	if (dma_mmap_from_coherent(dev, vma, cpu_addr, size, &ret))
+	if (dma_mmap_from_dev_coherent(dev, vma, cpu_addr, size, &ret))
 		return ret;
 
 	if (off < count && user_count <= (count - off)) {

arch/mn10300/include/asm/bug.h

@@ -21,7 +21,7 @@ do {								\
 	asm volatile(						\
 		"	syscall 15			\n"	\
 		"0:					\n"	\
-		"	.section __bug_table,\"a\"	\n"	\
+		"	.section __bug_table,\"aw\"	\n"	\
 		"	.long 0b,%0,%1			\n"	\
 		"	.previous			\n"	\
 		:						\

arch/parisc/configs/712_defconfig

@@ -1,11 +1,9 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_SLAB=y
@@ -14,7 +12,6 @@ CONFIG_OPROFILE=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_PA7100LC=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_GSC_LASI=y
@@ -32,11 +29,9 @@ CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
-# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 # CONFIG_IPV6 is not set
 CONFIG_NETFILTER=y
-CONFIG_IP_NF_QUEUE=m
 CONFIG_LLC2=m
 CONFIG_NET_PKTGEN=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@@ -65,21 +60,20 @@ CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
 CONFIG_BONDING=m
+CONFIG_DUMMY=m
 CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
 CONFIG_LASI_82596=y
 CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_MPPE=m
 CONFIG_PPPOE=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
 # CONFIG_KEYBOARD_HIL_OLD is not set
 CONFIG_MOUSE_SERIAL=m
+CONFIG_LEGACY_PTY_COUNT=64
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_NR_UARTS=17
@@ -88,22 +82,17 @@ CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_SERIAL_MUX is not set
 CONFIG_PDC_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=64
 CONFIG_PRINTER=m
 CONFIG_PPDEV=m
 # CONFIG_HW_RANDOM is not set
 CONFIG_RAW_DRIVER=y
 # CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 CONFIG_DUMMY_CONSOLE_COLUMNS=128
 CONFIG_DUMMY_CONSOLE_ROWS=48
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
@@ -111,13 +100,9 @@ CONFIG_LOGO=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SEQUENCER=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER_OSS=y
 CONFIG_SND_HARMONY=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
 CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_AUTOFS4_FS=y
@@ -130,14 +115,10 @@ CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_UFS_FS=m
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_NFS_V4=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V4=y
-CONFIG_RPCSEC_GSS_SPKM3=m
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_CIFS=m
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_737=m
@@ -177,21 +158,16 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=m
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAST6=m
@@ -200,6 +176,7 @@ CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-CONFIG_LIBCRC32C=m
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y

arch/parisc/configs/a500_defconfig

@@ -1,13 +1,10 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_SLAB=y
@@ -16,7 +13,6 @@ CONFIG_OPROFILE=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_PA8X00=y
 CONFIG_64BIT=y
 CONFIG_SMP=y
@@ -43,21 +39,17 @@ CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
-# CONFIG_INET_LRO is not set
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_RAW=m
@@ -70,7 +62,6 @@ CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_LOG=m
 CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
@@ -94,7 +85,6 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
 CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_ISCSI_ATTRS=m
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_QLOGIC_1280=m
@@ -106,43 +96,38 @@ CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_FUSION=y
 CONFIG_FUSION_SPI=m
-CONFIG_FUSION_FC=m
 CONFIG_FUSION_CTL=m
 CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
 CONFIG_BONDING=m
+CONFIG_DUMMY=m
 CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_VENDOR_3COM=y
+CONFIG_PCMCIA_3C574=m
+CONFIG_PCMCIA_3C589=m
 CONFIG_VORTEX=m
 CONFIG_TYPHOON=m
+CONFIG_ACENIC=m
+CONFIG_ACENIC_OMIT_TIGON_I=y
+CONFIG_PCNET32=m
+CONFIG_TIGON3=m
 CONFIG_NET_TULIP=y
 CONFIG_DE2104X=m
 CONFIG_TULIP=y
 CONFIG_TULIP_MMIO=y
 CONFIG_PCMCIA_XIRCOM=m
 CONFIG_HP100=m
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=m
 CONFIG_E100=m
-CONFIG_ACENIC=m
-CONFIG_ACENIC_OMIT_TIGON_I=y
 CONFIG_E1000=m
-CONFIG_TIGON3=m
-CONFIG_NET_PCMCIA=y
-CONFIG_PCMCIA_3C589=m
-CONFIG_PCMCIA_3C574=m
 CONFIG_PCMCIA_SMC91C92=m
 CONFIG_PCMCIA_XIRC2PS=m
 CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_CS=m
@@ -151,7 +136,6 @@ CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_PDC_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
 # CONFIG_HW_RANDOM is not set
 CONFIG_RAW_DRIVER=y
 # CONFIG_HWMON is not set
@@ -160,7 +144,6 @@ CONFIG_AGP_PARISC=y
 # CONFIG_STI_CONSOLE is not set
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
 CONFIG_JFS_FS=m
 CONFIG_XFS_FS=m
 CONFIG_AUTOFS4_FS=y
@@ -173,13 +156,9 @@ CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_UFS_FS=m
 CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
+CONFIG_NFS_V4=m
 CONFIG_NFSD=m
 CONFIG_NFSD_V4=y
-CONFIG_RPCSEC_GSS_SPKM3=m
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_CIFS=m
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_850=m
@@ -187,17 +166,12 @@ CONFIG_NLS_ASCII=m
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=m
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_HEADERS_CHECK=y
-CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_BLOWFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-CONFIG_LIBCRC32C=m

arch/parisc/configs/b180_defconfig

@@ -3,7 +3,6 @@ CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
@@ -25,8 +24,6 @@ CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -53,10 +50,9 @@ CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_LASI_82596=y
 CONFIG_NET_TULIP=y
 CONFIG_TULIP=y
+CONFIG_LASI_82596=y
 CONFIG_PPP=y
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_HIL_OLD is not set
@@ -71,40 +67,31 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_PRINTER=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SEQUENCER=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER_OSS=y
 CONFIG_SND_HARMONY=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
 CONFIG_AUTOFS4_FS=y
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-CONFIG_SMB_FS=y
 CONFIG_NLS_CODEPAGE_437=m
 CONFIG_NLS_CODEPAGE_850=m
 CONFIG_NLS_ASCII=m
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=m
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_HEADERS_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_SECURITY=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/parisc/configs/c3000_defconfig

@@ -1,12 +1,9 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_SLAB=y
@@ -15,7 +12,6 @@ CONFIG_OPROFILE=m
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
 CONFIG_PA8X00=y
 CONFIG_PREEMPT_VOLUNTARY=y
 # CONFIG_GSC is not set
@@ -31,13 +27,11 @@ CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
 # CONFIG_INET_DIAG is not set
 CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
 CONFIG_NETFILTER_DEBUG=y
-CONFIG_IP_NF_QUEUE=m
 CONFIG_NET_PKTGEN=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_DEVTMPFS=y
@@ -50,13 +44,11 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_NS87415=y
-CONFIG_PATA_SIL680=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
 CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_ISCSI_ATTRS=m
 CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
@@ -76,28 +68,23 @@ CONFIG_FUSION=y
 CONFIG_FUSION_SPI=m
 CONFIG_FUSION_CTL=m
 CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
 CONFIG_BONDING=m
+CONFIG_DUMMY=m
 CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
+CONFIG_ACENIC=m
+CONFIG_TIGON3=m
 CONFIG_NET_TULIP=y
 CONFIG_DE2104X=m
 CONFIG_TULIP=y
 CONFIG_TULIP_MMIO=y
-CONFIG_NET_PCI=y
 CONFIG_E100=m
-CONFIG_ACENIC=m
 CONFIG_E1000=m
-CONFIG_TIGON3=m
 CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPPOE=m
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1600
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_MOUSE_PS2 is not set
 CONFIG_SERIO=m
@@ -111,7 +98,6 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 # CONFIG_HW_RANDOM is not set
 CONFIG_RAW_DRIVER=y
 # CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
@@ -121,9 +107,6 @@ CONFIG_LOGO=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_SEQUENCER=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER_OSS=y
 CONFIG_SND_AD1889=y
 CONFIG_USB_HIDDEV=y
 CONFIG_USB=y
@@ -139,7 +122,6 @@ CONFIG_USB_MICROTEK=m
 CONFIG_USB_LEGOTOWER=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
 CONFIG_XFS_FS=m
 CONFIG_AUTOFS4_FS=y
 CONFIG_ISO9660_FS=y
@@ -149,7 +131,6 @@ CONFIG_VFAT_FS=m
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
@@ -159,18 +140,13 @@ CONFIG_NLS_ASCII=m
 CONFIG_NLS_ISO8859_1=m
 CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_UTF8=m
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_HEADERS_CHECK=y
-CONFIG_DEBUG_KERNEL=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
-CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
-CONFIG_LIBCRC32C=m

arch/parisc/configs/c8000_defconfig

@@ -1,16 +1,13 @@
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
+# CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_BSD_PROCESS_ACCT_V3=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
 CONFIG_EXPERT=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_SLAB=y
@@ -23,7 +20,6 @@ CONFIG_PA8X00=y
 CONFIG_64BIT=y
 CONFIG_SMP=y
 CONFIG_PREEMPT=y
-# CONFIG_CROSS_MEMORY_ATTACH is not set
 CONFIG_IOMMU_CCIO=y
 CONFIG_PCI=y
 CONFIG_PCI_LBA=y
@@ -146,7 +142,6 @@ CONFIG_FB_FOREIGN_ENDIAN=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_STI is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_FRAMEBUFFER_CONSOLE=y
@@ -157,12 +152,9 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_SOUND=m
 CONFIG_SND=m
+CONFIG_SND_VERBOSE_PRINTK=y
 CONFIG_SND_SEQUENCER=m
 CONFIG_SND_SEQ_DUMMY=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_SEQUENCER_OSS=y
-CONFIG_SND_VERBOSE_PRINTK=y
 CONFIG_SND_AD1889=m
 # CONFIG_SND_USB is not set
 # CONFIG_SND_GSC is not set
@@ -174,8 +166,6 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
 CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT4_FS=m
 CONFIG_REISERFS_FS=m
 CONFIG_REISERFS_PROC_INFO=y
 CONFIG_XFS_FS=m
@@ -238,11 +228,8 @@ CONFIG_DEBUG_SLAB=y
 CONFIG_DEBUG_SLAB_LEAK=y
 CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_STACKOVERFLOW=y
-CONFIG_LOCKUP_DETECTOR=y
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
 CONFIG_PANIC_ON_OOPS=y
 CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_PROVE_RCU_DELAY=y
 CONFIG_DEBUG_BLOCK_EXT_DEVT=y
 CONFIG_LATENCYTOP=y
 CONFIG_KEYS=y

arch/parisc/configs/default_defconfig

@@ -1,11 +1,9 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_SLAB=y
@@ -41,9 +39,7 @@ CONFIG_IP_PNP_DHCP=y
 CONFIG_IP_PNP_BOOTP=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
-# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
-CONFIG_IPV6=y
 CONFIG_INET6_AH=y
 CONFIG_INET6_ESP=y
 CONFIG_INET6_IPCOMP=y
@@ -82,26 +78,23 @@ CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=y
 CONFIG_BLK_DEV_DM=y
 CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
 CONFIG_BONDING=m
+CONFIG_DUMMY=m
 CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=m
-CONFIG_LASI_82596=y
-CONFIG_NET_TULIP=y
-CONFIG_TULIP=y
-CONFIG_NET_PCI=y
 CONFIG_ACENIC=y
 CONFIG_TIGON3=y
-CONFIG_NET_PCMCIA=y
+CONFIG_NET_TULIP=y
+CONFIG_TULIP=y
+CONFIG_LASI_82596=y
 CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPPOE=m
 CONFIG_PPP_ASYNC=m
 CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
 # CONFIG_KEYBOARD_HIL_OLD is not set
 CONFIG_MOUSE_SERIAL=y
+CONFIG_LEGACY_PTY_COUNT=64
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 CONFIG_SERIAL_8250_CS=y
@@ -109,31 +102,24 @@ CONFIG_SERIAL_8250_NR_UARTS=17
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
 CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_LEGACY_PTY_COUNT=64
 CONFIG_PRINTER=m
 CONFIG_PPDEV=m
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 CONFIG_DUMMY_CONSOLE_COLUMNS=128
 CONFIG_DUMMY_CONSOLE_ROWS=48
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x16=y
 CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_MONO is not set
 # CONFIG_LOGO_LINUX_VGA16 is not set
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_SOUND=y
 CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER_OSS=y
 CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_SEQUENCER=y
 CONFIG_SND_AD1889=y
 CONFIG_SND_HARMONY=y
 CONFIG_HID_GYRATION=y
@@ -141,7 +127,6 @@ CONFIG_HID_NTRIG=y
 CONFIG_HID_PANTHERLORD=y
 CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
 CONFIG_HID_TOPSEED=y
 CONFIG_USB=y
@@ -150,21 +135,15 @@ CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_UHCI_HCD=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_AUTOFS_FS=y
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
 CONFIG_VFAT_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V4=y
-CONFIG_RPCSEC_GSS_SPKM3=m
-CONFIG_SMB_FS=m
-CONFIG_SMB_NLS_DEFAULT=y
 CONFIG_CIFS=m
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_737=m
@@ -204,30 +183,24 @@ CONFIG_NLS_ISO8859_15=m
 CONFIG_NLS_KOI8_R=m
 CONFIG_NLS_KOI8_U=m
 CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_FS=y
 CONFIG_HEADERS_CHECK=y
+CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_MUTEXES=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 CONFIG_KEYS=y
-CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
 CONFIG_CRYPTO_TGR192=m
 CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_AES=m
 CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_BLOWFISH=m
 CONFIG_CRYPTO_CAST6=m
 CONFIG_CRYPTO_KHAZAD=m
 CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 # CONFIG_CRYPTO_HW is not set
 CONFIG_LIBCRC32C=m
+CONFIG_FONTS=y

arch/parisc/configs/generic-32bit_defconfig

@@ -2,15 +2,11 @@ CONFIG_LOCALVERSION="-32bit"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=16
 CONFIG_BLK_DEV_INITRD=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_LZMA=y
-CONFIG_RD_LZO=y
 CONFIG_EXPERT=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_PERF_EVENTS=y
@@ -49,7 +45,6 @@ CONFIG_INET_ESP=m
 # CONFIG_INET_XFRM_MODE_TRANSPORT is not set
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
 CONFIG_INET_DIAG=m
 CONFIG_LLC2=m
 # CONFIG_WIRELESS is not set
@@ -149,10 +144,8 @@ CONFIG_PRINTER=m
 CONFIG_PPDEV=m
 # CONFIG_HW_RANDOM is not set
 CONFIG_I2C=y
-CONFIG_POWER_SUPPLY=y
 # CONFIG_HWMON is not set
 CONFIG_AGP=y
-CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
 CONFIG_FB_FOREIGN_ENDIAN=y
 CONFIG_FB_MODE_HELPERS=y
@@ -169,11 +162,8 @@ CONFIG_LOGO=y
 # CONFIG_LOGO_LINUX_CLUT224 is not set
 CONFIG_SOUND=m
 CONFIG_SND=m
-CONFIG_SND_SEQUENCER=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-CONFIG_SND_SEQUENCER_OSS=y
 CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_SEQUENCER=m
 CONFIG_SND_AD1889=m
 CONFIG_SND_HARMONY=m
 CONFIG_HIDRAW=y
@@ -223,12 +213,7 @@ CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_QUOTA=y
-CONFIG_XFS_RT=y
 CONFIG_QUOTA=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_QFMT_V2=y
@@ -293,15 +278,12 @@ CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_DETECT_HUNG_TASK=y
-CONFIG_TIMER_STATS=y
 CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_MUTEXES=y
-CONFIG_RCU_CPU_STALL_INFO=y
 CONFIG_LATENCYTOP=y
 CONFIG_LKDTM=m
 CONFIG_KEYS=y
-CONFIG_CRYPTO_NULL=m
 CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_HMAC=y
 CONFIG_CRYPTO_MD5=y
@@ -320,7 +302,6 @@ CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRC_CCITT=m
 CONFIG_CRC_T10DIF=y
 CONFIG_FONTS=y

arch/parisc/configs/generic-64bit_defconfig

@@ -8,10 +8,11 @@ CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
 CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
+CONFIG_CGROUPS=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CPUSETS=y
 CONFIG_RELAY=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -52,7 +53,6 @@ CONFIG_INET_ESP=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=m
 CONFIG_INET_XFRM_MODE_TUNNEL=m
 CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=m
 CONFIG_INET_DIAG=m
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_ADVANCED is not set
@@ -84,7 +84,6 @@ CONFIG_PATA_SIL680=y
 CONFIG_ATA_GENERIC=y
 CONFIG_MD=y
 CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
 CONFIG_BLK_DEV_DM=m
 CONFIG_DM_RAID=m
 CONFIG_DM_UEVENT=y
@@ -138,21 +137,21 @@ CONFIG_QLGE=m
 # CONFIG_NET_VENDOR_TI is not set
 # CONFIG_NET_VENDOR_VIA is not set
 # CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_PHYLIB=y
-CONFIG_MARVELL_PHY=m
-CONFIG_DAVICOM_PHY=m
-CONFIG_QSEMI_PHY=m
-CONFIG_LXT_PHY=m
-CONFIG_CICADA_PHY=m
-CONFIG_VITESSE_PHY=m
-CONFIG_SMSC_PHY=m
-CONFIG_BROADCOM_PHY=m
-CONFIG_ICPLUS_PHY=m
-CONFIG_REALTEK_PHY=m
-CONFIG_NATIONAL_PHY=m
-CONFIG_STE10XP=m
-CONFIG_LSI_ET1011C_PHY=m
 CONFIG_MDIO_BITBANG=m
+CONFIG_PHYLIB=y
+CONFIG_BROADCOM_PHY=m
+CONFIG_CICADA_PHY=m
+CONFIG_DAVICOM_PHY=m
+CONFIG_ICPLUS_PHY=m
+CONFIG_LSI_ET1011C_PHY=m
+CONFIG_LXT_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_NATIONAL_PHY=m
+CONFIG_QSEMI_PHY=m
+CONFIG_REALTEK_PHY=m
+CONFIG_SMSC_PHY=m
+CONFIG_STE10XP=m
+CONFIG_VITESSE_PHY=m
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
 CONFIG_SLIP_SMART=y
@@ -166,10 +165,8 @@ CONFIG_INPUT_MISC=y
 CONFIG_SERIO_SERPORT=m
 # CONFIG_HP_SDC is not set
 CONFIG_SERIO_RAW=m
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_NOZOMI=m
-# CONFIG_DEVKMEM is not set
 CONFIG_SERIAL_8250=y
 # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
 CONFIG_SERIAL_8250_CONSOLE=y
@@ -207,10 +204,8 @@ CONFIG_AGP=y
 CONFIG_AGP_PARISC=y
 CONFIG_DRM=y
 CONFIG_DRM_RADEON=y
-CONFIG_DRM_RADEON_UMS=y
 CONFIG_FIRMWARE_EDID=y
 CONFIG_FB_MODE_HELPERS=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_BACKLIGHT_GENERIC is not set
 CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
 CONFIG_LOGO=y
@@ -246,8 +241,6 @@ CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_SECURITY=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_SECURITY=y
 CONFIG_XFS_FS=m
 CONFIG_BTRFS_FS=m
 CONFIG_QUOTA=y
@@ -286,27 +279,16 @@ CONFIG_DEBUG_FS=y
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_STACKOVERFLOW=y
-CONFIG_LOCKUP_DETECTOR=y
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
 # CONFIG_SCHED_DEBUG is not set
-CONFIG_TIMER_STATS=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_ECB=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_ARC4=m
 CONFIG_CRYPTO_FCRYPT=m
 CONFIG_CRYPTO_DEFLATE=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_CRC_CCITT=m
 CONFIG_LIBCRC32C=y
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y

arch/parisc/include/asm/bug.h

@@ -27,7 +27,7 @@
 	do {								\
 		asm volatile("\n"					\
 			     "1:\t" PARISC_BUG_BREAK_ASM "\n"		\
-			     "\t.pushsection __bug_table,\"a\"\n"	\
+			     "\t.pushsection __bug_table,\"aw\"\n"	\
 			     "2:\t" ASM_WORD_INSN "1b, %c0\n"		\
 			     "\t.short %c1, %c2\n"			\
 			     "\t.org 2b+%c3\n"				\
@@ -50,7 +50,7 @@
 	do {								\
 		asm volatile("\n"					\
 			     "1:\t" PARISC_BUG_BREAK_ASM "\n"		\
-			     "\t.pushsection __bug_table,\"a\"\n"	\
+			     "\t.pushsection __bug_table,\"aw\"\n"	\
 			     "2:\t" ASM_WORD_INSN "1b, %c0\n"		\
 			     "\t.short %c1, %c2\n"			\
 			     "\t.org 2b+%c3\n"				\
@@ -64,7 +64,7 @@
 	do {								\
 		asm volatile("\n"					\
 			     "1:\t" PARISC_BUG_BREAK_ASM "\n"		\
-			     "\t.pushsection __bug_table,\"a\"\n"	\
+			     "\t.pushsection __bug_table,\"aw\"\n"	\
 			     "2:\t" ASM_WORD_INSN "1b\n"		\
 			     "\t.short %c0\n"				\
 			     "\t.org 2b+%c1\n"				\

arch/parisc/include/asm/pdcpat.h

@@ -150,7 +150,7 @@
 #define PDC_PAT_MEM_SETGM		9L /* Set Good Memory value        */
 #define PDC_PAT_MEM_ADD_PAGE		10L /* ADDs a page to the cell      */
 #define PDC_PAT_MEM_ADDRESS		11L /* Get Physical Location From   */
-                                    		 /* Memory Address               */
+					    /* Memory Address               */
 #define PDC_PAT_MEM_GET_TXT_SIZE   	12L /* Get Formatted Text Size   */
 #define PDC_PAT_MEM_GET_PD_TXT     	13L /* Get PD Formatted Text     */
 #define PDC_PAT_MEM_GET_CELL_TXT   	14L /* Get Cell Formatted Text   */
@@ -228,6 +228,17 @@ struct pdc_pat_mem_read_pd_retinfo { /* PDC_PAT_MEM/PDC_PAT_MEM_PD_READ */
 	unsigned long pdt_entries;
 };
 
+struct pdc_pat_mem_phys_mem_location { /* PDC_PAT_MEM/PDC_PAT_MEM_ADDRESS */
+	u64 cabinet:8;
+	u64 ign1:8;
+	u64 ign2:8;
+	u64 cell_slot:8;
+	u64 ign3:8;
+	u64 dimm_slot:8; /* DIMM slot, e.g. 0x1A, 0x2B, show user hex value! */
+	u64 ign4:8;
+	u64 source:4; /* for mem: always 0x07 */
+	u64 source_detail:4; /* for mem: always 0x04 (SIMM or DIMM) */
+};
 
 struct pdc_pat_pd_addr_map_entry {
 	unsigned char entry_type;       /* 1 = Memory Descriptor Entry Type */
@@ -319,6 +330,9 @@ extern int pdc_pat_mem_read_cell_pdt(struct pdc_pat_mem_read_pd_retinfo *pret,
 extern int pdc_pat_mem_read_pd_pdt(struct pdc_pat_mem_read_pd_retinfo *pret,
 		unsigned long *pdt_entries_ptr, unsigned long count,
 		unsigned long offset);
+extern int pdc_pat_mem_get_dimm_phys_location(
+                struct pdc_pat_mem_phys_mem_location *pret,
+                unsigned long phys_addr);
 
 #endif /* __ASSEMBLY__ */
 

arch/parisc/include/uapi/asm/ioctls.h

@@ -60,7 +60,7 @@
 #define TIOCGPKT	_IOR('T', 0x38, int) /* Get packet mode state */
 #define TIOCGPTLCK	_IOR('T', 0x39, int) /* Get Pty lock state */
 #define TIOCGEXCL	_IOR('T', 0x40, int) /* Get exclusive mode state */
-#define TIOCGPTPEER	_IOR('T', 0x41, int) /* Safely open the slave */
+#define TIOCGPTPEER	_IO('T', 0x41) /* Safely open the slave */
 
 #define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
 #define FIOCLEX		0x5451

arch/parisc/kernel/cache.c

@@ -453,8 +453,8 @@ void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
 	  before it can be accessed through the kernel mapping. */
 	preempt_disable();
 	flush_dcache_page_asm(__pa(vfrom), vaddr);
-	preempt_enable();
 	copy_page_asm(vto, vfrom);
+	preempt_enable();
 }
 EXPORT_SYMBOL(copy_user_page);
 
@@ -539,6 +539,10 @@ void flush_cache_mm(struct mm_struct *mm)
 	struct vm_area_struct *vma;
 	pgd_t *pgd;
 
+	/* Flush the TLB to avoid speculation if coherency is required. */
+	if (parisc_requires_coherency())
+		flush_tlb_all();
+
 	/* Flushing the whole cache on each cpu takes forever on
 	   rp3440, etc.  So, avoid it if the mm isn't too big.  */
 	if (mm_total_size(mm) >= parisc_cache_flush_threshold) {
@@ -577,33 +581,22 @@ void flush_cache_mm(struct mm_struct *mm)
 void flush_cache_range(struct vm_area_struct *vma,
 		unsigned long start, unsigned long end)
 {
-	unsigned long addr;
-	pgd_t *pgd;
-
 	BUG_ON(!vma->vm_mm->context);
 
+	/* Flush the TLB to avoid speculation if coherency is required. */
+	if (parisc_requires_coherency())
+		flush_tlb_range(vma, start, end);
+
 	if ((end - start) >= parisc_cache_flush_threshold) {
 		flush_cache_all();
 		return;
 	}
 
-	if (vma->vm_mm->context == mfsp(3)) {
-		flush_user_dcache_range_asm(start, end);
-		if (vma->vm_flags & VM_EXEC)
-			flush_user_icache_range_asm(start, end);
-		return;
-	}
+	BUG_ON(vma->vm_mm->context != mfsp(3));
 
-	pgd = vma->vm_mm->pgd;
-	for (addr = start & PAGE_MASK; addr < end; addr += PAGE_SIZE) {
-		unsigned long pfn;
-		pte_t *ptep = get_ptep(pgd, addr);
-		if (!ptep)
-			continue;
-		pfn = pte_pfn(*ptep);
-		if (pfn_valid(pfn))
-			__flush_cache_page(vma, addr, PFN_PHYS(pfn));
-	}
+	flush_user_dcache_range_asm(start, end);
+	if (vma->vm_flags & VM_EXEC)
+		flush_user_icache_range_asm(start, end);
 }
 
 void
@@ -612,7 +605,8 @@ flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr, unsigned long
 	BUG_ON(!vma->vm_mm->context);
 
 	if (pfn_valid(pfn)) {
-		flush_tlb_page(vma, vmaddr);
+		if (parisc_requires_coherency())
+			flush_tlb_page(vma, vmaddr);
 		__flush_cache_page(vma, vmaddr, PFN_PHYS(pfn));
 	}
 }

arch/parisc/kernel/firmware.c

@@ -1481,12 +1481,44 @@ int pdc_pat_mem_read_pd_pdt(struct pdc_pat_mem_read_pd_retinfo *pret,
 		unsigned long offset)
 {
 	int retval;
-	unsigned long flags;
+	unsigned long flags, entries;
 
 	spin_lock_irqsave(&pdc_lock, flags);
 	retval = mem_pdc_call(PDC_PAT_MEM, PDC_PAT_MEM_PD_READ,
-		__pa(&pret), __pa(pdt_entries_ptr),
+		__pa(&pdc_result), __pa(pdt_entries_ptr),
 		count, offset);
+
+	if (retval == PDC_OK) {
+		entries = min(pdc_result[0], count);
+		pret->actual_count_bytes = entries;
+		pret->pdt_entries = entries / sizeof(unsigned long);
+	}
+
+	spin_unlock_irqrestore(&pdc_lock, flags);
+
+	return retval;
+}
+
+/**
+ * pdc_pat_mem_get_dimm_phys_location - Get physical DIMM slot via PAT firmware
+ * @pret: ptr to hold returned information
+ * @phys_addr: physical address to examine
+ *
+ */
+int pdc_pat_mem_get_dimm_phys_location(
+		struct pdc_pat_mem_phys_mem_location *pret,
+		unsigned long phys_addr)
+{
+	int retval;
+	unsigned long flags;
+
+	spin_lock_irqsave(&pdc_lock, flags);
+	retval = mem_pdc_call(PDC_PAT_MEM, PDC_PAT_MEM_ADDRESS,
+		__pa(&pdc_result), phys_addr);
+
+	if (retval == PDC_OK)
+		memcpy(pret, &pdc_result, sizeof(*pret));
+
 	spin_unlock_irqrestore(&pdc_lock, flags);
 
 	return retval;

arch/parisc/kernel/irq.c

@@ -413,6 +413,10 @@ static inline void stack_overflow_check(struct pt_regs *regs)
 	if (regs->sr[7])
 		return;
 
+	/* exit if already in panic */
+	if (sysctl_panic_on_stackoverflow < 0)
+		return;
+
 	/* calculate kernel stack usage */
 	stack_usage = sp - stack_start;
 #ifdef CONFIG_IRQSTACKS
@@ -454,8 +458,10 @@ check_kernel_stack:
 #ifdef CONFIG_IRQSTACKS
 panic_check:
 #endif
-	if (sysctl_panic_on_stackoverflow)
+	if (sysctl_panic_on_stackoverflow) {
+		sysctl_panic_on_stackoverflow = -1; /* disable further checks */
 		panic("low stack detected by irq handler - check messages\n");
+	}
 #endif
 }
 

arch/parisc/kernel/pdt.c

@@ -112,10 +112,12 @@ void __init pdc_pdt_init(void)
 #ifdef CONFIG_64BIT
 		struct pdc_pat_mem_read_pd_retinfo pat_pret;
 
+		/* try old obsolete PAT firmware function first */
+		pdt_type = PDT_PAT_OLD;
 		ret = pdc_pat_mem_read_cell_pdt(&pat_pret, pdt_entry,
 			MAX_PDT_ENTRIES);
 		if (ret != PDC_OK) {
-			pdt_type = PDT_PAT_OLD;
+			pdt_type = PDT_PAT_NEW;
 			ret = pdc_pat_mem_read_pd_pdt(&pat_pret, pdt_entry,
 				MAX_PDT_TABLE_SIZE, 0);
 		}
@@ -131,11 +133,20 @@ void __init pdc_pdt_init(void)
 	}
 
 	for (i = 0; i < pdt_status.pdt_entries; i++) {
-		if (i < 20)
-			pr_warn("PDT: BAD PAGE #%d at 0x%08lx (error_type = %lu)\n",
-				i,
-				pdt_entry[i] & PAGE_MASK,
-				pdt_entry[i] & 1);
+		struct pdc_pat_mem_phys_mem_location loc;
+
+		/* get DIMM slot number */
+		loc.dimm_slot = 0xff;
+#ifdef CONFIG_64BIT
+		pdc_pat_mem_get_dimm_phys_location(&loc, pdt_entry[i]);
+#endif
+
+		pr_warn("PDT: BAD PAGE #%d at 0x%08lx, "
+			"DIMM slot %02x (error_type = %lu)\n",
+			i,
+			pdt_entry[i] & PAGE_MASK,
+			loc.dimm_slot,
+			pdt_entry[i] & 1);
 
 		/* mark memory page bad */
 		memblock_reserve(pdt_entry[i] & PAGE_MASK, PAGE_SIZE);

arch/parisc/kernel/process.c

@@ -53,6 +53,7 @@
 #include <linux/uaccess.h>
 #include <linux/rcupdate.h>
 #include <linux/random.h>
+#include <linux/nmi.h>
 
 #include <asm/io.h>
 #include <asm/asm-offsets.h>
@@ -145,6 +146,7 @@ void machine_power_off(void)
 
 	/* prevent soft lockup/stalled CPU messages for endless loop. */
 	rcu_sysrq_start();
+	lockup_detector_suspend();
 	for (;;);
 }
 

arch/parisc/kernel/vmlinux.lds.S

@@ -78,6 +78,8 @@ SECTIONS
 		*(.text.sys_exit)
 		*(.text.do_sigaltstack)
 		*(.text.do_fork)
+		*(.text.div)
+		*($$*)			/* millicode routines */
 		*(.text.*)
 		*(.fixup)
 		*(.lock.text)		/* out-of-line lock text */

arch/powerpc/Makefile

@@ -59,6 +59,19 @@ machine-$(CONFIG_PPC64) += 64
 machine-$(CONFIG_CPU_LITTLE_ENDIAN) += le
 UTS_MACHINE := $(subst $(space),,$(machine-y))
 
+# XXX This needs to be before we override LD below
+ifdef CONFIG_PPC32
+KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
+else
+ifeq ($(call ld-ifversion, -ge, 225000000, y),y)
+# Have the linker provide sfpr if possible.
+# There is a corresponding test in arch/powerpc/lib/Makefile
+KBUILD_LDFLAGS_MODULE += --save-restore-funcs
+else
+KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
+endif
+endif
+
 ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
 override LD	+= -EL
 LDEMULATION	:= lppc
@@ -190,18 +203,6 @@ else
 CHECKFLAGS	+= -D__LITTLE_ENDIAN__
 endif
 
-ifdef CONFIG_PPC32
-KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
-else
-ifeq ($(call ld-ifversion, -ge, 225000000, y),y)
-# Have the linker provide sfpr if possible.
-# There is a corresponding test in arch/powerpc/lib/Makefile
-KBUILD_LDFLAGS_MODULE += --save-restore-funcs
-else
-KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
-endif
-endif
-
 ifeq ($(CONFIG_476FPE_ERR46),y)
 	KBUILD_LDFLAGS_MODULE += --ppc476-workaround \
 		-T $(srctree)/arch/powerpc/platforms/44x/ppc476_modules.lds

arch/powerpc/include/asm/book3s/64/hash.h

@@ -91,6 +91,7 @@ static inline int hash__pgd_bad(pgd_t pgd)
 }
 #ifdef CONFIG_STRICT_KERNEL_RWX
 extern void hash__mark_rodata_ro(void);
+extern void hash__mark_initmem_nx(void);
 #endif
 
 extern void hpte_need_flush(struct mm_struct *mm, unsigned long addr,

arch/powerpc/include/asm/book3s/64/mmu.h

@@ -59,13 +59,14 @@ extern struct patb_entry *partition_tb;
 #define PRTS_MASK	0x1f		/* process table size field */
 #define PRTB_MASK	0x0ffffffffffff000UL
 
-/*
- * Limit process table to PAGE_SIZE table. This
- * also limit the max pid we can support.
- * MAX_USER_CONTEXT * 16 bytes of space.
- */
-#define PRTB_SIZE_SHIFT	(CONTEXT_BITS + 4)
-#define PRTB_ENTRIES	(1ul << CONTEXT_BITS)
+/* Number of supported PID bits */
+extern unsigned int mmu_pid_bits;
+
+/* Base PID to allocate from */
+extern unsigned int mmu_base_pid;
+
+#define PRTB_SIZE_SHIFT	(mmu_pid_bits + 4)
+#define PRTB_ENTRIES	(1ul << mmu_pid_bits)
 
 /*
  * Power9 currently only support 64K partition table size.

arch/powerpc/include/asm/book3s/64/pgtable.h

@@ -1192,5 +1192,6 @@ static inline const int pud_pfn(pud_t pud)
 	BUILD_BUG();
 	return 0;
 }
+
 #endif /* __ASSEMBLY__ */
 #endif /* _ASM_POWERPC_BOOK3S_64_PGTABLE_H_ */

arch/powerpc/include/asm/book3s/64/radix.h

@@ -118,6 +118,7 @@
 
 #ifdef CONFIG_STRICT_KERNEL_RWX
 extern void radix__mark_rodata_ro(void);
+extern void radix__mark_initmem_nx(void);
 #endif
 
 static inline unsigned long __radix_pte_update(pte_t *ptep, unsigned long clr,

arch/powerpc/include/asm/bug.h

@@ -18,7 +18,7 @@
 #include <asm/asm-offsets.h>
 #ifdef CONFIG_DEBUG_BUGVERBOSE
 .macro EMIT_BUG_ENTRY addr,file,line,flags
-	 .section __bug_table,"a"
+	 .section __bug_table,"aw"
 5001:	 PPC_LONG \addr, 5002f
 	 .short \line, \flags
 	 .org 5001b+BUG_ENTRY_SIZE
@@ -29,7 +29,7 @@
 .endm
 #else
 .macro EMIT_BUG_ENTRY addr,file,line,flags
-	 .section __bug_table,"a"
+	 .section __bug_table,"aw"
 5001:	 PPC_LONG \addr
 	 .short \flags
 	 .org 5001b+BUG_ENTRY_SIZE
@@ -42,14 +42,14 @@
    sizeof(struct bug_entry), respectively */
 #ifdef CONFIG_DEBUG_BUGVERBOSE
 #define _EMIT_BUG_ENTRY				\
-	".section __bug_table,\"a\"\n"		\
+	".section __bug_table,\"aw\"\n"		\
 	"2:\t" PPC_LONG "1b, %0\n"		\
 	"\t.short %1, %2\n"			\
 	".org 2b+%3\n"				\
 	".previous\n"
 #else
 #define _EMIT_BUG_ENTRY				\
-	".section __bug_table,\"a\"\n"		\
+	".section __bug_table,\"aw\"\n"		\
 	"2:\t" PPC_LONG "1b\n"			\
 	"\t.short %2\n"				\
 	".org 2b+%3\n"				\

arch/powerpc/include/asm/mmu_context.h

@@ -45,7 +45,7 @@ extern void set_context(unsigned long id, pgd_t *pgd);
 
 #ifdef CONFIG_PPC_BOOK3S_64
 extern void radix__switch_mmu_context(struct mm_struct *prev,
-				     struct mm_struct *next);
+				      struct mm_struct *next);
 static inline void switch_mmu_context(struct mm_struct *prev,
 				      struct mm_struct *next,
 				      struct task_struct *tsk)
@@ -67,6 +67,12 @@ extern void __destroy_context(unsigned long context_id);
 extern void mmu_context_init(void);
 #endif
 
+#if defined(CONFIG_KVM_BOOK3S_HV_POSSIBLE) && defined(CONFIG_PPC_RADIX_MMU)
+extern void radix_kvm_prefetch_workaround(struct mm_struct *mm);
+#else
+static inline void radix_kvm_prefetch_workaround(struct mm_struct *mm) { }
+#endif
+
 extern void switch_cop(struct mm_struct *next);
 extern int use_cop(unsigned long acop, struct mm_struct *mm);
 extern void drop_cop(unsigned long acop, struct mm_struct *mm);
@@ -79,9 +85,13 @@ static inline void switch_mm_irqs_off(struct mm_struct *prev,
 				      struct mm_struct *next,
 				      struct task_struct *tsk)
 {
+	bool new_on_cpu = false;
+
 	/* Mark this context has been used on the new CPU */
-	if (!cpumask_test_cpu(smp_processor_id(), mm_cpumask(next)))
+	if (!cpumask_test_cpu(smp_processor_id(), mm_cpumask(next))) {
 		cpumask_set_cpu(smp_processor_id(), mm_cpumask(next));
+		new_on_cpu = true;
+	}
 
 	/* 32-bit keeps track of the current PGDIR in the thread struct */
 #ifdef CONFIG_PPC32
@@ -109,6 +119,10 @@ static inline void switch_mm_irqs_off(struct mm_struct *prev,
 	if (cpu_has_feature(CPU_FTR_ALTIVEC))
 		asm volatile ("dssall");
 #endif /* CONFIG_ALTIVEC */
+
+	if (new_on_cpu)
+		radix_kvm_prefetch_workaround(next);
+
 	/*
 	 * The actual HW switching method differs between the various
 	 * sub architectures. Out of line for now

arch/powerpc/include/asm/pgtable.h

@@ -80,6 +80,13 @@ unsigned long vmalloc_to_phys(void *vmalloc_addr);
 
 void pgtable_cache_add(unsigned shift, void (*ctor)(void *));
 void pgtable_cache_init(void);
+
+#ifdef CONFIG_STRICT_KERNEL_RWX
+void mark_initmem_nx(void);
+#else
+static inline void mark_initmem_nx(void) { }
+#endif
+
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_POWERPC_PGTABLE_H */

arch/powerpc/include/uapi/asm/ioctls.h

@@ -100,7 +100,7 @@
 #define TIOCGPKT	_IOR('T', 0x38, int) /* Get packet mode state */
 #define TIOCGPTLCK	_IOR('T', 0x39, int) /* Get Pty lock state */
 #define TIOCGEXCL	_IOR('T', 0x40, int) /* Get exclusive mode state */
-#define TIOCGPTPEER	_IOR('T', 0x41, int) /* Safely open the slave */
+#define TIOCGPTPEER	_IO('T', 0x41) /* Safely open the slave */
 
 #define TIOCSERCONFIG	0x5453
 #define TIOCSERGWILD	0x5454

arch/powerpc/kernel/exceptions-64s.S

@@ -824,7 +824,7 @@ EXC_COMMON(trap_0b_common, 0xb00, unknown_exception)
  * r3 volatile parameter and return value for status
  * r4-r10 volatile input and output value
  * r11 volatile hypercall number and output value
- * r12 volatile
+ * r12 volatile input and output value
  * r13-r31 nonvolatile
  * LR nonvolatile
  * CTR volatile
@@ -834,25 +834,26 @@ EXC_COMMON(trap_0b_common, 0xb00, unknown_exception)
  * Other registers nonvolatile
  *
  * The intersection of volatile registers that don't contain possible
- * inputs is: r12, cr0, xer, ctr. We may use these as scratch regs
- * upon entry without saving.
+ * inputs is: cr0, xer, ctr. We may use these as scratch regs upon entry
+ * without saving, though xer is not a good idea to use, as hardware may
+ * interpret some bits so it may be costly to change them.
  */
 #ifdef CONFIG_KVM_BOOK3S_64_HANDLER
 	/*
 	 * There is a little bit of juggling to get syscall and hcall
-	 * working well. Save r10 in ctr to be restored in case it is a
-	 * hcall.
+	 * working well. Save r13 in ctr to avoid using SPRG scratch
+	 * register.
 	 *
 	 * Userspace syscalls have already saved the PPR, hcalls must save
 	 * it before setting HMT_MEDIUM.
 	 */
 #define SYSCALL_KVMTEST							\
-	mr	r12,r13;						\
+	mtctr	r13;							\
 	GET_PACA(r13);							\
-	mtctr	r10;							\
+	std	r10,PACA_EXGEN+EX_R10(r13);				\
 	KVMTEST_PR(0xc00); /* uses r10, branch to do_kvm_0xc00_system_call */ \
 	HMT_MEDIUM;							\
-	mr	r9,r12;							\
+	mfctr	r9;
 
 #else
 #define SYSCALL_KVMTEST							\
@@ -935,8 +936,8 @@ EXC_VIRT_END(system_call, 0x4c00, 0x100)
 	 * This is a hcall, so register convention is as above, with these
 	 * differences:
 	 * r13 = PACA
-	 * r12 = orig r13
-	 * ctr = orig r10
+	 * ctr = orig r13
+	 * orig r10 saved in PACA
 	 */
 TRAMP_KVM_BEGIN(do_kvm_0xc00)
 	 /*
@@ -944,14 +945,13 @@ TRAMP_KVM_BEGIN(do_kvm_0xc00)
 	  * HMT_MEDIUM. That allows the KVM code to save that value into the
 	  * guest state (it is the guest's PPR value).
 	  */
-	OPT_GET_SPR(r0, SPRN_PPR, CPU_FTR_HAS_PPR)
+	OPT_GET_SPR(r10, SPRN_PPR, CPU_FTR_HAS_PPR)
 	HMT_MEDIUM
-	OPT_SAVE_REG_TO_PACA(PACA_EXGEN+EX_PPR, r0, CPU_FTR_HAS_PPR)
+	OPT_SAVE_REG_TO_PACA(PACA_EXGEN+EX_PPR, r10, CPU_FTR_HAS_PPR)
 	mfctr	r10
-	SET_SCRATCH0(r12)
+	SET_SCRATCH0(r10)
 	std	r9,PACA_EXGEN+EX_R9(r13)
 	mfcr	r9
-	std	r10,PACA_EXGEN+EX_R10(r13)
 	KVM_HANDLER(PACA_EXGEN, EXC_STD, 0xc00)
 #endif
 

arch/powerpc/kernel/idle_book3s.S

@@ -30,6 +30,7 @@
  * Use unused space in the interrupt stack to save and restore
  * registers for winkle support.
  */
+#define _MMCR0	GPR0
 #define _SDR1	GPR3
 #define _PTCR	GPR3
 #define _RPR	GPR4
@@ -272,6 +273,14 @@ power_enter_stop:
 	b 	pnv_wakeup_noloss
 
 .Lhandle_esl_ec_set:
+	/*
+	 * POWER9 DD2 can incorrectly set PMAO when waking up after a
+	 * state-loss idle. Saving and restoring MMCR0 over idle is a
+	 * workaround.
+	 */
+	mfspr	r4,SPRN_MMCR0
+	std	r4,_MMCR0(r1)
+
 /*
  * Check if the requested state is a deep idle state.
  */
@@ -450,10 +459,14 @@ ALT_FTR_SECTION_END_IFSET(CPU_FTR_ARCH_300)
 pnv_restore_hyp_resource_arch300:
 	/*
 	 * Workaround for POWER9, if we lost resources, the ERAT
-	 * might have been mixed up and needs flushing.
+	 * might have been mixed up and needs flushing. We also need
+	 * to reload MMCR0 (see comment above).
 	 */
 	blt	cr3,1f
 	PPC_INVALIDATE_ERAT
+	ld	r1,PACAR1(r13)
+	ld	r4,_MMCR0(r1)
+	mtspr	SPRN_MMCR0,r4
 1:
 	/*
 	 * POWER ISA 3. Use PSSCR to determine if we

arch/powerpc/kvm/book3s_64_mmu_hv.c

@@ -164,8 +164,10 @@ long kvmppc_alloc_reset_hpt(struct kvm *kvm, int order)
 		goto out;
 	}
 
-	if (kvm->arch.hpt.virt)
+	if (kvm->arch.hpt.virt) {
 		kvmppc_free_hpt(&kvm->arch.hpt);
+		kvmppc_rmap_reset(kvm);
+	}
 
 	err = kvmppc_allocate_hpt(&info, order);
 	if (err < 0)

arch/powerpc/kvm/book3s_hv.c

@@ -3211,6 +3211,8 @@ static int kvmppc_vcpu_run_hv(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			run->fail_entry.hardware_entry_failure_reason = 0;
 			return -EINVAL;
 		}
+		/* Enable TM so we can read the TM SPRs */
+		mtmsr(mfmsr() | MSR_TM);
 		current->thread.tm_tfhar = mfspr(SPRN_TFHAR);
 		current->thread.tm_tfiar = mfspr(SPRN_TFIAR);
 		current->thread.tm_texasr = mfspr(SPRN_TEXASR);

arch/powerpc/kvm/book3s_hv_rmhandlers.S

@@ -1443,12 +1443,14 @@ mc_cont:
 	ori	r6,r6,1
 	mtspr	SPRN_CTRLT,r6
 4:
-	/* Read the guest SLB and save it away */
+	/* Check if we are running hash or radix and store it in cr2 */
 	ld	r5, VCPU_KVM(r9)
 	lbz	r0, KVM_RADIX(r5)
-	cmpwi	r0, 0
+	cmpwi	cr2,r0,0
+
+	/* Read the guest SLB and save it away */
 	li	r5, 0
-	bne	3f			/* for radix, save 0 entries */
+	bne	cr2, 3f			/* for radix, save 0 entries */
 	lwz	r0,VCPU_SLB_NR(r9)	/* number of entries in SLB */
 	mtctr	r0
 	li	r6,0
@@ -1712,11 +1714,6 @@ BEGIN_FTR_SECTION_NESTED(96)
 END_FTR_SECTION_NESTED(CPU_FTR_ARCH_300, 0, 96)
 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
 22:
-	/* Clear out SLB */
-	li	r5,0
-	slbmte	r5,r5
-	slbia
-	ptesync
 
 	/* Restore host values of some registers */
 BEGIN_FTR_SECTION
@@ -1737,10 +1734,56 @@ BEGIN_FTR_SECTION
 	mtspr	SPRN_PID, r7
 	mtspr	SPRN_IAMR, r8
 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_300)
+
+#ifdef CONFIG_PPC_RADIX_MMU
+	/*
+	 * Are we running hash or radix ?
+	 */
+	beq	cr2,3f
+
+	/* Radix: Handle the case where the guest used an illegal PID */
+	LOAD_REG_ADDR(r4, mmu_base_pid)
+	lwz	r3, VCPU_GUEST_PID(r9)
+	lwz	r5, 0(r4)
+	cmpw	cr0,r3,r5
+	blt	2f
+
+	/*
+	 * Illegal PID, the HW might have prefetched and cached in the TLB
+	 * some translations for the  LPID 0 / guest PID combination which
+	 * Linux doesn't know about, so we need to flush that PID out of
+	 * the TLB. First we need to set LPIDR to 0 so tlbiel applies to
+	 * the right context.
+	*/
+	li	r0,0
+	mtspr	SPRN_LPID,r0
+	isync
+
+	/* Then do a congruence class local flush */
+	ld	r6,VCPU_KVM(r9)
+	lwz	r0,KVM_TLB_SETS(r6)
+	mtctr	r0
+	li	r7,0x400		/* IS field = 0b01 */
+	ptesync
+	sldi	r0,r3,32		/* RS has PID */
+1:	PPC_TLBIEL(7,0,2,1,1)		/* RIC=2, PRS=1, R=1 */
+	addi	r7,r7,0x1000
+	bdnz	1b
+	ptesync
+
+2:	/* Flush the ERAT on radix P9 DD1 guest exit */
 BEGIN_FTR_SECTION
 	PPC_INVALIDATE_ERAT
 END_FTR_SECTION_IFSET(CPU_FTR_POWER9_DD1)
+	b	4f
+#endif /* CONFIG_PPC_RADIX_MMU */
 
+	/* Hash: clear out SLB */
+3:	li	r5,0
+	slbmte	r5,r5
+	slbia
+	ptesync
+4:
 	/*
 	 * POWER7/POWER8 guest -> host partition switch code.
 	 * We don't have to lock against tlbies but we do

arch/powerpc/mm/mem.c

@@ -402,6 +402,7 @@ void __init mem_init(void)
 void free_initmem(void)
 {
 	ppc_md.progress = ppc_printk_progress;
+	mark_initmem_nx();
 	free_initmem_default(POISON_FREE_INITMEM);
 }
 

arch/powerpc/mm/mmu_context_book3s64.c

@@ -126,9 +126,10 @@ static int hash__init_new_context(struct mm_struct *mm)
 static int radix__init_new_context(struct mm_struct *mm)
 {
 	unsigned long rts_field;
-	int index;
+	int index, max_id;
 
-	index = alloc_context_id(1, PRTB_ENTRIES - 1);
+	max_id = (1 << mmu_pid_bits) - 1;
+	index = alloc_context_id(mmu_base_pid, max_id);
 	if (index < 0)
 		return index;
 

arch/powerpc/mm/pgtable-hash64.c

@@ -425,33 +425,51 @@ int hash__has_transparent_hugepage(void)
 #endif /* CONFIG_TRANSPARENT_HUGEPAGE */
 
 #ifdef CONFIG_STRICT_KERNEL_RWX
-void hash__mark_rodata_ro(void)
+static bool hash__change_memory_range(unsigned long start, unsigned long end,
+				      unsigned long newpp)
 {
-	unsigned long start = (unsigned long)_stext;
-	unsigned long end = (unsigned long)__init_begin;
 	unsigned long idx;
 	unsigned int step, shift;
-	unsigned long newpp = PP_RXXX;
 
 	shift = mmu_psize_defs[mmu_linear_psize].shift;
 	step = 1 << shift;
 
-	start = ((start + step - 1) >> shift) << shift;
-	end = (end >> shift) << shift;
+	start = ALIGN_DOWN(start, step);
+	end = ALIGN(end, step); // aligns up
 
-	pr_devel("marking ro start %lx, end %lx, step %x\n",
-			start, end, step);
+	if (start >= end)
+		return false;
 
-	if (start == end) {
-		pr_warn("could not set rodata ro, relocate the start"
-			" of the kernel to a 0x%x boundary\n", step);
-		return;
-	}
+	pr_debug("Changing page protection on range 0x%lx-0x%lx, to 0x%lx, step 0x%x\n",
+		 start, end, newpp, step);
 
 	for (idx = start; idx < end; idx += step)
 		/* Not sure if we can do much with the return value */
 		mmu_hash_ops.hpte_updateboltedpp(newpp, idx, mmu_linear_psize,
 							mmu_kernel_ssize);
 
+	return true;
+}
+
+void hash__mark_rodata_ro(void)
+{
+	unsigned long start, end;
+
+	start = (unsigned long)_stext;
+	end = (unsigned long)__init_begin;
+
+	WARN_ON(!hash__change_memory_range(start, end, PP_RXXX));
+}
+
+void hash__mark_initmem_nx(void)
+{
+	unsigned long start, end, pp;
+
+	start = (unsigned long)__init_begin;
+	end = (unsigned long)__init_end;
+
+	pp = htab_convert_pte_flags(pgprot_val(PAGE_KERNEL));
+
+	WARN_ON(!hash__change_memory_range(start, end, pp));
 }
 #endif

arch/powerpc/mm/pgtable-radix.c

@@ -25,6 +25,9 @@
 
 #include <trace/events/thp.h>
 
+unsigned int mmu_pid_bits;
+unsigned int mmu_base_pid;
+
 static int native_register_process_table(unsigned long base, unsigned long pg_sz,
 					 unsigned long table_size)
 {
@@ -112,10 +115,9 @@ set_the_pte:
 }
 
 #ifdef CONFIG_STRICT_KERNEL_RWX
-void radix__mark_rodata_ro(void)
+void radix__change_memory_range(unsigned long start, unsigned long end,
+				unsigned long clear)
 {
-	unsigned long start = (unsigned long)_stext;
-	unsigned long end = (unsigned long)__init_begin;
 	unsigned long idx;
 	pgd_t *pgdp;
 	pud_t *pudp;
@@ -125,7 +127,8 @@ void radix__mark_rodata_ro(void)
 	start = ALIGN_DOWN(start, PAGE_SIZE);
 	end = PAGE_ALIGN(end); // aligns up
 
-	pr_devel("marking ro start %lx, end %lx\n", start, end);
+	pr_debug("Changing flags on range %lx-%lx removing 0x%lx\n",
+		 start, end, clear);
 
 	for (idx = start; idx < end; idx += PAGE_SIZE) {
 		pgdp = pgd_offset_k(idx);
@@ -147,11 +150,29 @@ void radix__mark_rodata_ro(void)
 		if (!ptep)
 			continue;
 update_the_pte:
-		radix__pte_update(&init_mm, idx, ptep, _PAGE_WRITE, 0, 0);
+		radix__pte_update(&init_mm, idx, ptep, clear, 0, 0);
 	}
 
 	radix__flush_tlb_kernel_range(start, end);
 }
+
+void radix__mark_rodata_ro(void)
+{
+	unsigned long start, end;
+
+	start = (unsigned long)_stext;
+	end = (unsigned long)__init_begin;
+
+	radix__change_memory_range(start, end, _PAGE_WRITE);
+}
+
+void radix__mark_initmem_nx(void)
+{
+	unsigned long start = (unsigned long)__init_begin;
+	unsigned long end = (unsigned long)__init_end;
+
+	radix__change_memory_range(start, end, _PAGE_EXEC);
+}
 #endif /* CONFIG_STRICT_KERNEL_RWX */
 
 static inline void __meminit print_mapping(unsigned long start,
@@ -243,11 +264,34 @@ static void __init radix_init_pgtable(void)
 	for_each_memblock(memory, reg)
 		WARN_ON(create_physical_mapping(reg->base,
 						reg->base + reg->size));
+
+	/* Find out how many PID bits are supported */
+	if (cpu_has_feature(CPU_FTR_HVMODE)) {
+		if (!mmu_pid_bits)
+			mmu_pid_bits = 20;
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+		/*
+		 * When KVM is possible, we only use the top half of the
+		 * PID space to avoid collisions between host and guest PIDs
+		 * which can cause problems due to prefetch when exiting the
+		 * guest with AIL=3
+		 */
+		mmu_base_pid = 1 << (mmu_pid_bits - 1);
+#else
+		mmu_base_pid = 1;
+#endif
+	} else {
+		/* The guest uses the bottom half of the PID space */
+		if (!mmu_pid_bits)
+			mmu_pid_bits = 19;
+		mmu_base_pid = 1;
+	}
+
 	/*
 	 * Allocate Partition table and process table for the
 	 * host.
 	 */
-	BUILD_BUG_ON_MSG((PRTB_SIZE_SHIFT > 36), "Process table size too large.");
+	BUG_ON(PRTB_SIZE_SHIFT > 36);
 	process_tb = early_alloc_pgtable(1UL << PRTB_SIZE_SHIFT);
 	/*
 	 * Fill in the process table.
@@ -321,6 +365,12 @@ static int __init radix_dt_scan_page_sizes(unsigned long node,
 	if (type == NULL || strcmp(type, "cpu") != 0)
 		return 0;
 
+	/* Find MMU PID size */
+	prop = of_get_flat_dt_prop(node, "ibm,mmu-pid-bits", &size);
+	if (prop && size == 4)
+		mmu_pid_bits = be32_to_cpup(prop);
+
+	/* Grab page size encodings */
 	prop = of_get_flat_dt_prop(node, "ibm,processor-radix-AP-encodings", &size);
 	if (!prop)
 		return 0;

arch/powerpc/mm/pgtable_64.c

@@ -505,4 +505,12 @@ void mark_rodata_ro(void)
 	else
 		hash__mark_rodata_ro();
 }
+
+void mark_initmem_nx(void)
+{
+	if (radix_enabled())
+		radix__mark_initmem_nx();
+	else
+		hash__mark_initmem_nx();
+}
 #endif

arch/powerpc/mm/subpage-prot.c

@@ -36,7 +36,7 @@ void subpage_prot_free(struct mm_struct *mm)
 		}
 	}
 	addr = 0;
-	for (i = 0; i < 2; ++i) {
+	for (i = 0; i < (TASK_SIZE_USER64 >> 43); ++i) {
 		p = spt->protptrs[i];
 		if (!p)
 			continue;

arch/powerpc/mm/tlb-radix.c

@@ -12,12 +12,12 @@
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
 #include <linux/memblock.h>
-#include <asm/ppc-opcode.h>
 
+#include <asm/ppc-opcode.h>
 #include <asm/tlb.h>
 #include <asm/tlbflush.h>
 #include <asm/trace.h>
-
+#include <asm/cputhreads.h>
 
 #define RIC_FLUSH_TLB 0
 #define RIC_FLUSH_PWC 1
@@ -454,3 +454,44 @@ void radix__flush_tlb_pte_p9_dd1(unsigned long old_pte, struct mm_struct *mm,
 	else
 		radix__flush_tlb_page_psize(mm, address, mmu_virtual_psize);
 }
+
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+extern void radix_kvm_prefetch_workaround(struct mm_struct *mm)
+{
+	unsigned int pid = mm->context.id;
+
+	if (unlikely(pid == MMU_NO_CONTEXT))
+		return;
+
+	/*
+	 * If this context hasn't run on that CPU before and KVM is
+	 * around, there's a slim chance that the guest on another
+	 * CPU just brought in obsolete translation into the TLB of
+	 * this CPU due to a bad prefetch using the guest PID on
+	 * the way into the hypervisor.
+	 *
+	 * We work around this here. If KVM is possible, we check if
+	 * any sibling thread is in KVM. If it is, the window may exist
+	 * and thus we flush that PID from the core.
+	 *
+	 * A potential future improvement would be to mark which PIDs
+	 * have never been used on the system and avoid it if the PID
+	 * is new and the process has no other cpumask bit set.
+	 */
+	if (cpu_has_feature(CPU_FTR_HVMODE) && radix_enabled()) {
+		int cpu = smp_processor_id();
+		int sib = cpu_first_thread_sibling(cpu);
+		bool flush = false;
+
+		for (; sib <= cpu_last_thread_sibling(cpu) && !flush; sib++) {
+			if (sib == cpu)
+				continue;
+			if (paca[sib].kvm_hstate.kvm_vcpu)
+				flush = true;
+		}
+		if (flush)
+			_tlbiel_pid(pid, RIC_FLUSH_ALL);
+	}
+}
+EXPORT_SYMBOL_GPL(radix_kvm_prefetch_workaround);
+#endif /* CONFIG_KVM_BOOK3S_HV_POSSIBLE */

arch/powerpc/platforms/powernv/opal.c

@@ -78,7 +78,7 @@ void opal_configure_cores(void)
 	 *  ie. Host hash  supports  hash guests
 	 *      Host radix supports  hash/radix guests
 	 */
-	if (cpu_has_feature(CPU_FTR_ARCH_300)) {
+	if (early_cpu_has_feature(CPU_FTR_ARCH_300)) {
 		reinit_flags |= OPAL_REINIT_CPUS_MMU_HASH;
 		if (early_radix_enabled())
 			reinit_flags |= OPAL_REINIT_CPUS_MMU_RADIX;

arch/powerpc/platforms/pseries/reconfig.c

@@ -82,7 +82,6 @@ static int pSeries_reconfig_remove_node(struct device_node *np)
 
 	of_detach_node(np);
 	of_node_put(parent);
-	of_node_put(np); /* Must decrement the refcount */
 	return 0;
 }
 

arch/s390/include/asm/bug.h

@@ -14,7 +14,7 @@
 		".section .rodata.str,\"aMS\",@progbits,1\n"	\
 		"2:	.asciz	\""__FILE__"\"\n"		\
 		".previous\n"					\
-		".section __bug_table,\"a\"\n"			\
+		".section __bug_table,\"aw\"\n"			\
 		"3:	.long	1b-3b,2b-3b\n"			\
 		"	.short	%0,%1\n"			\
 		"	.org	3b+%2\n"			\
@@ -30,7 +30,7 @@
 	asm volatile(					\
 		"0:	j	0b+2\n"			\
 		"1:\n"					\
-		".section __bug_table,\"a\"\n"		\
+		".section __bug_table,\"aw\"\n"		\
 		"2:	.long	1b-2b\n"		\
 		"	.short	%0\n"			\
 		"	.org	2b+%1\n"		\

arch/s390/kernel/perf_cpum_sf.c

@@ -998,7 +998,7 @@ static int perf_push_sample(struct perf_event *event, struct sf_raw_sample *sfr)
 	psw_bits(regs.psw).ia	= sfr->basic.ia;
 	psw_bits(regs.psw).dat	= sfr->basic.T;
 	psw_bits(regs.psw).wait = sfr->basic.W;
-	psw_bits(regs.psw).per	= sfr->basic.P;
+	psw_bits(regs.psw).pstate = sfr->basic.P;
 	psw_bits(regs.psw).as	= sfr->basic.AS;
 
 	/*

arch/s390/kvm/kvm-s390.c

@@ -1324,7 +1324,7 @@ static long kvm_s390_get_skeys(struct kvm *kvm, struct kvm_s390_skeys *args)
 {
 	uint8_t *keys;
 	uint64_t hva;
-	int i, r = 0;
+	int srcu_idx, i, r = 0;
 
 	if (args->flags != 0)
 		return -EINVAL;
@@ -1342,6 +1342,7 @@ static long kvm_s390_get_skeys(struct kvm *kvm, struct kvm_s390_skeys *args)
 		return -ENOMEM;
 
 	down_read(&current->mm->mmap_sem);
+	srcu_idx = srcu_read_lock(&kvm->srcu);
 	for (i = 0; i < args->count; i++) {
 		hva = gfn_to_hva(kvm, args->start_gfn + i);
 		if (kvm_is_error_hva(hva)) {
@@ -1353,6 +1354,7 @@ static long kvm_s390_get_skeys(struct kvm *kvm, struct kvm_s390_skeys *args)
 		if (r)
 			break;
 	}
+	srcu_read_unlock(&kvm->srcu, srcu_idx);
 	up_read(&current->mm->mmap_sem);
 
 	if (!r) {
@@ -1370,7 +1372,7 @@ static long kvm_s390_set_skeys(struct kvm *kvm, struct kvm_s390_skeys *args)
 {
 	uint8_t *keys;
 	uint64_t hva;
-	int i, r = 0;
+	int srcu_idx, i, r = 0;
 
 	if (args->flags != 0)
 		return -EINVAL;
@@ -1396,6 +1398,7 @@ static long kvm_s390_set_skeys(struct kvm *kvm, struct kvm_s390_skeys *args)
 		goto out;
 
 	down_read(&current->mm->mmap_sem);
+	srcu_idx = srcu_read_lock(&kvm->srcu);
 	for (i = 0; i < args->count; i++) {
 		hva = gfn_to_hva(kvm, args->start_gfn + i);
 		if (kvm_is_error_hva(hva)) {
@@ -1413,6 +1416,7 @@ static long kvm_s390_set_skeys(struct kvm *kvm, struct kvm_s390_skeys *args)
 		if (r)
 			break;
 	}
+	srcu_read_unlock(&kvm->srcu, srcu_idx);
 	up_read(&current->mm->mmap_sem);
 out:
 	kvfree(keys);

arch/s390/mm/pgtable.c

@@ -591,11 +591,11 @@ void ptep_zap_key(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
 	unsigned long ptev;
 	pgste_t pgste;
 
-	/* Clear storage key */
+	/* Clear storage key ACC and F, but set R/C */
 	preempt_disable();
 	pgste = pgste_get_lock(ptep);
-	pgste_val(pgste) &= ~(PGSTE_ACC_BITS | PGSTE_FP_BIT |
-			      PGSTE_GR_BIT | PGSTE_GC_BIT);
+	pgste_val(pgste) &= ~(PGSTE_ACC_BITS | PGSTE_FP_BIT);
+	pgste_val(pgste) |= PGSTE_GR_BIT | PGSTE_GC_BIT;
 	ptev = pte_val(*ptep);
 	if (!(ptev & _PAGE_INVALID) && (ptev & _PAGE_WRITE))
 		page_set_storage_key(ptev & PAGE_MASK, PAGE_DEFAULT_KEY, 1);

arch/sh/include/asm/bug.h

@@ -24,14 +24,14 @@
  */
 #ifdef CONFIG_DEBUG_BUGVERBOSE
 #define _EMIT_BUG_ENTRY				\
-	"\t.pushsection __bug_table,\"a\"\n"	\
+	"\t.pushsection __bug_table,\"aw\"\n"	\
 	"2:\t.long 1b, %O1\n"			\
 	"\t.short %O2, %O3\n"			\
 	"\t.org 2b+%O4\n"			\
 	"\t.popsection\n"
 #else
 #define _EMIT_BUG_ENTRY				\
-	"\t.pushsection __bug_table,\"a\"\n"	\
+	"\t.pushsection __bug_table,\"aw\"\n"	\
 	"2:\t.long 1b\n"			\
 	"\t.short %O3\n"			\
 	"\t.org 2b+%O4\n"			\

arch/sh/include/uapi/asm/ioctls.h

@@ -93,7 +93,7 @@
 #define TIOCGPKT	_IOR('T', 0x38, int) /* Get packet mode state */
 #define TIOCGPTLCK	_IOR('T', 0x39, int) /* Get Pty lock state */
 #define TIOCGEXCL	_IOR('T', 0x40, int) /* Get exclusive mode state */
-#define TIOCGPTPEER	_IOR('T', 0x41, int) /* Safely open the slave */
+#define TIOCGPTPEER	_IO('T', 0x41) /* Safely open the slave */
 
 #define TIOCSERCONFIG	_IO('T', 83) /* 0x5453 */
 #define TIOCSERGWILD	_IOR('T', 84,  int) /* 0x5454 */

arch/sparc/include/asm/trap_block.h

@@ -54,6 +54,7 @@ extern struct trap_per_cpu trap_block[NR_CPUS];
 void init_cur_cpu_trap(struct thread_info *);
 void setup_tba(void);
 extern int ncpus_probed;
+extern u64 cpu_mondo_counter[NR_CPUS];
 
 unsigned long real_hard_smp_processor_id(void);
 

arch/sparc/include/uapi/asm/ioctls.h

@@ -88,7 +88,7 @@
 #define TIOCGPTN	_IOR('t', 134, unsigned int) /* Get Pty Number */
 #define TIOCSPTLCK	_IOW('t', 135, int) /* Lock/unlock PTY */
 #define TIOCSIG		_IOW('t', 136, int) /* Generate signal on Pty slave */
-#define TIOCGPTPEER	_IOR('t', 137, int) /* Safely open the slave */
+#define TIOCGPTPEER	_IO('t', 137) /* Safely open the slave */
 
 /* Little f */
 #define FIOCLEX		_IO('f', 1)

arch/sparc/kernel/pci_sun4v.c

@@ -673,12 +673,14 @@ static void dma_4v_unmap_sg(struct device *dev, struct scatterlist *sglist,
 static int dma_4v_supported(struct device *dev, u64 device_mask)
 {
 	struct iommu *iommu = dev->archdata.iommu;
-	u64 dma_addr_mask;
+	u64 dma_addr_mask = iommu->dma_addr_mask;
 
-	if (device_mask > DMA_BIT_MASK(32) && iommu->atu)
-		dma_addr_mask = iommu->atu->dma_addr_mask;
-	else
-		dma_addr_mask = iommu->dma_addr_mask;
+	if (device_mask > DMA_BIT_MASK(32)) {
+		if (iommu->atu)
+			dma_addr_mask = iommu->atu->dma_addr_mask;
+		else
+			return 0;
+	}
 
 	if ((device_mask & dma_addr_mask) == dma_addr_mask)
 		return 1;

arch/sparc/kernel/smp_64.c

@@ -622,22 +622,48 @@ retry:
 	}
 }
 
-/* Multi-cpu list version.  */
+#define	CPU_MONDO_COUNTER(cpuid)	(cpu_mondo_counter[cpuid])
+#define	MONDO_USEC_WAIT_MIN		2
+#define	MONDO_USEC_WAIT_MAX		100
+#define	MONDO_RETRY_LIMIT		500000
+
+/* Multi-cpu list version.
+ *
+ * Deliver xcalls to 'cnt' number of cpus in 'cpu_list'.
+ * Sometimes not all cpus receive the mondo, requiring us to re-send
+ * the mondo until all cpus have received, or cpus are truly stuck
+ * unable to receive mondo, and we timeout.
+ * Occasionally a target cpu strand is borrowed briefly by hypervisor to
+ * perform guest service, such as PCIe error handling. Consider the
+ * service time, 1 second overall wait is reasonable for 1 cpu.
+ * Here two in-between mondo check wait time are defined: 2 usec for
+ * single cpu quick turn around and up to 100usec for large cpu count.
+ * Deliver mondo to large number of cpus could take longer, we adjusts
+ * the retry count as long as target cpus are making forward progress.
+ */
 static void hypervisor_xcall_deliver(struct trap_per_cpu *tb, int cnt)
 {
-	int retries, this_cpu, prev_sent, i, saw_cpu_error;
+	int this_cpu, tot_cpus, prev_sent, i, rem;
+	int usec_wait, retries, tot_retries;
+	u16 first_cpu = 0xffff;
+	unsigned long xc_rcvd = 0;
 	unsigned long status;
+	int ecpuerror_id = 0;
+	int enocpu_id = 0;
 	u16 *cpu_list;
+	u16 cpu;
 
 	this_cpu = smp_processor_id();
-
 	cpu_list = __va(tb->cpu_list_pa);
-
-	saw_cpu_error = 0;
-	retries = 0;
+	usec_wait = cnt * MONDO_USEC_WAIT_MIN;
+	if (usec_wait > MONDO_USEC_WAIT_MAX)
+		usec_wait = MONDO_USEC_WAIT_MAX;
+	retries = tot_retries = 0;
+	tot_cpus = cnt;
 	prev_sent = 0;
+
 	do {
-		int forward_progress, n_sent;
+		int n_sent, mondo_delivered, target_cpu_busy;
 
 		status = sun4v_cpu_mondo_send(cnt,
 					      tb->cpu_list_pa,
@@ -645,94 +671,113 @@ static void hypervisor_xcall_deliver(struct trap_per_cpu *tb, int cnt)
 
 		/* HV_EOK means all cpus received the xcall, we're done.  */
 		if (likely(status == HV_EOK))
-			break;
+			goto xcall_done;
+
+		/* If not these non-fatal errors, panic */
+		if (unlikely((status != HV_EWOULDBLOCK) &&
+			(status != HV_ECPUERROR) &&
+			(status != HV_ENOCPU)))
+			goto fatal_errors;
 
 		/* First, see if we made any forward progress.
+		 *
+		 * Go through the cpu_list, count the target cpus that have
+		 * received our mondo (n_sent), and those that did not (rem).
+		 * Re-pack cpu_list with the cpus remain to be retried in the
+		 * front - this simplifies tracking the truly stalled cpus.
 		 *
 		 * The hypervisor indicates successful sends by setting
 		 * cpu list entries to the value 0xffff.
+		 *
+		 * EWOULDBLOCK means some target cpus did not receive the
+		 * mondo and retry usually helps.
+		 *
+		 * ECPUERROR means at least one target cpu is in error state,
+		 * it's usually safe to skip the faulty cpu and retry.
+		 *
+		 * ENOCPU means one of the target cpu doesn't belong to the
+		 * domain, perhaps offlined which is unexpected, but not
+		 * fatal and it's okay to skip the offlined cpu.
 		 */
+		rem = 0;
 		n_sent = 0;
 		for (i = 0; i < cnt; i++) {
-			if (likely(cpu_list[i] == 0xffff))
+			cpu = cpu_list[i];
+			if (likely(cpu == 0xffff)) {
 				n_sent++;
+			} else if ((status == HV_ECPUERROR) &&
+				(sun4v_cpu_state(cpu) == HV_CPU_STATE_ERROR)) {
+				ecpuerror_id = cpu + 1;
+			} else if (status == HV_ENOCPU && !cpu_online(cpu)) {
+				enocpu_id = cpu + 1;
+			} else {
+				cpu_list[rem++] = cpu;
+			}
 		}
 
-		forward_progress = 0;
-		if (n_sent > prev_sent)
-			forward_progress = 1;
+		/* No cpu remained, we're done. */
+		if (rem == 0)
+			break;
 
+		/* Otherwise, update the cpu count for retry. */
+		cnt = rem;
+
+		/* Record the overall number of mondos received by the
+		 * first of the remaining cpus.
+		 */
+		if (first_cpu != cpu_list[0]) {
+			first_cpu = cpu_list[0];
+			xc_rcvd = CPU_MONDO_COUNTER(first_cpu);
+		}
+
+		/* Was any mondo delivered successfully? */
+		mondo_delivered = (n_sent > prev_sent);
 		prev_sent = n_sent;
 
-		/* If we get a HV_ECPUERROR, then one or more of the cpus
-		 * in the list are in error state.  Use the cpu_state()
-		 * hypervisor call to find out which cpus are in error state.
+		/* or, was any target cpu busy processing other mondos? */
+		target_cpu_busy = (xc_rcvd < CPU_MONDO_COUNTER(first_cpu));
+		xc_rcvd = CPU_MONDO_COUNTER(first_cpu);
+
+		/* Retry count is for no progress. If we're making progress,
+		 * reset the retry count.
 		 */
-		if (unlikely(status == HV_ECPUERROR)) {
-			for (i = 0; i < cnt; i++) {
-				long err;
-				u16 cpu;
-
-				cpu = cpu_list[i];
-				if (cpu == 0xffff)
-					continue;
-
-				err = sun4v_cpu_state(cpu);
-				if (err == HV_CPU_STATE_ERROR) {
-					saw_cpu_error = (cpu + 1);
-					cpu_list[i] = 0xffff;
-				}
-			}
-		} else if (unlikely(status != HV_EWOULDBLOCK))
-			goto fatal_mondo_error;
-
-		/* Don't bother rewriting the CPU list, just leave the
-		 * 0xffff and non-0xffff entries in there and the
-		 * hypervisor will do the right thing.
-		 *
-		 * Only advance timeout state if we didn't make any
-		 * forward progress.
-		 */
-		if (unlikely(!forward_progress)) {
-			if (unlikely(++retries > 10000))
-				goto fatal_mondo_timeout;
-
-			/* Delay a little bit to let other cpus catch up
-			 * on their cpu mondo queue work.
-			 */
-			udelay(2 * cnt);
+		if (likely(mondo_delivered || target_cpu_busy)) {
+			tot_retries += retries;
+			retries = 0;
+		} else if (unlikely(retries > MONDO_RETRY_LIMIT)) {
+			goto fatal_mondo_timeout;
 		}
+
+		/* Delay a little bit to let other cpus catch up on
+		 * their cpu mondo queue work.
+		 */
+		if (!mondo_delivered)
+			udelay(usec_wait);
+
+		retries++;
 	} while (1);
 
-	if (unlikely(saw_cpu_error))
-		goto fatal_mondo_cpu_error;
-
+xcall_done:
+	if (unlikely(ecpuerror_id > 0)) {
+		pr_crit("CPU[%d]: SUN4V mondo cpu error, target cpu(%d) was in error state\n",
+		       this_cpu, ecpuerror_id - 1);
+	} else if (unlikely(enocpu_id > 0)) {
+		pr_crit("CPU[%d]: SUN4V mondo cpu error, target cpu(%d) does not belong to the domain\n",
+		       this_cpu, enocpu_id - 1);
+	}
 	return;
 
-fatal_mondo_cpu_error:
-	printk(KERN_CRIT "CPU[%d]: SUN4V mondo cpu error, some target cpus "
-	       "(including %d) were in error state\n",
-	       this_cpu, saw_cpu_error - 1);
-	return;
+fatal_errors:
+	/* fatal errors include bad alignment, etc */
+	pr_crit("CPU[%d]: Args were cnt(%d) cpulist_pa(%lx) mondo_block_pa(%lx)\n",
+	       this_cpu, tot_cpus, tb->cpu_list_pa, tb->cpu_mondo_block_pa);
+	panic("Unexpected SUN4V mondo error %lu\n", status);
 
 fatal_mondo_timeout:
-	printk(KERN_CRIT "CPU[%d]: SUN4V mondo timeout, no forward "
-	       " progress after %d retries.\n",
-	       this_cpu, retries);
-	goto dump_cpu_list_and_out;
-
-fatal_mondo_error:
-	printk(KERN_CRIT "CPU[%d]: Unexpected SUN4V mondo error %lu\n",
-	       this_cpu, status);
-	printk(KERN_CRIT "CPU[%d]: Args were cnt(%d) cpulist_pa(%lx) "
-	       "mondo_block_pa(%lx)\n",
-	       this_cpu, cnt, tb->cpu_list_pa, tb->cpu_mondo_block_pa);
-
-dump_cpu_list_and_out:
-	printk(KERN_CRIT "CPU[%d]: CPU list [ ", this_cpu);
-	for (i = 0; i < cnt; i++)
-		printk("%u ", cpu_list[i]);
-	printk("]\n");
+	/* some cpus being non-responsive to the cpu mondo */
+	pr_crit("CPU[%d]: SUN4V mondo timeout, cpu(%d) made no forward progress after %d retries. Total target cpus(%d).\n",
+	       this_cpu, first_cpu, (tot_retries + retries), tot_cpus);
+	panic("SUN4V mondo timeout panic\n");
 }
 
 static void (*xcall_deliver_impl)(struct trap_per_cpu *, int);

arch/sparc/kernel/sun4v_ivec.S

@@ -26,6 +26,21 @@ sun4v_cpu_mondo:
 	ldxa	[%g0] ASI_SCRATCHPAD, %g4
 	sub	%g4, TRAP_PER_CPU_FAULT_INFO, %g4
 
+	/* Get smp_processor_id() into %g3 */
+	sethi	%hi(trap_block), %g5
+	or	%g5, %lo(trap_block), %g5
+	sub	%g4, %g5, %g3
+	srlx	%g3, TRAP_BLOCK_SZ_SHIFT, %g3
+
+	/* Increment cpu_mondo_counter[smp_processor_id()] */
+	sethi	%hi(cpu_mondo_counter), %g5
+	or	%g5, %lo(cpu_mondo_counter), %g5
+	sllx	%g3, 3, %g3
+	add	%g5, %g3, %g5
+	ldx	[%g5], %g3
+	add	%g3, 1, %g3
+	stx	%g3, [%g5]
+
 	/* Get CPU mondo queue base phys address into %g7.  */
 	ldx	[%g4 + TRAP_PER_CPU_CPU_MONDO_PA], %g7
 

arch/sparc/kernel/traps_64.c

@@ -2733,6 +2733,7 @@ void do_getpsr(struct pt_regs *regs)
 	}
 }
 
+u64 cpu_mondo_counter[NR_CPUS] = {0};
 struct trap_per_cpu trap_block[NR_CPUS];
 EXPORT_SYMBOL(trap_block);