Compare commits

..

214 Commits

Author SHA1 Message Date
Linus Torvalds
c1be5a5b1b Linux 3.9 2013-04-28 17:36:01 -07:00
Linus Torvalds
4cbbd1d55d Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fix from Olof Johansson:
 "A late-arriving fix for musb on OMAP4, resolving an issue where the
  musb IP won't be clocked and thus not functional.  Small in scope,
  most of the lines changed is a longish comment."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock
2013-04-27 13:58:36 -07:00
Linus Torvalds
3c0b9de6d3 vm: add no-mmu vm_iomap_memory() stub
I think we could just move the full vm_iomap_memory() function into
util.h or similar, but I didn't get any reply from anybody actually
using nommu even to this trivial patch, so I'm not going to touch it any
more than required.

Here's the fairly minimal stub to make the nommu case at least
potentially work.  It doesn't seem like anybody cares, though.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-27 13:25:38 -07:00
Linus Torvalds
e09d13c4c8 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Ingo Molnar:
 "This fix adds missing RCU read protection"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  events: Protect access via task_subsys_state_check()
2013-04-27 10:08:09 -07:00
Olof Johansson
d21be237ff Merge tag 'omap-for-v3.9-rc6/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
From Tony Lindgren:
One MUSB regression fix that I forgot to send earlier. Without
this MUSB no longer works on omap4 based devices.

* tag 'omap-for-v3.9-rc6/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock

Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-26 17:35:21 -07:00
Linus Torvalds
d7d7271f42 Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
 "Two driver fixes.

  One avoids reading any file at a system with a cx25821 board
  (fortunately, this is not a common device).  The other one prevents
  reading after a buffer with ISDB-T devices based on mb86a20s."

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] cx25821: do not expose broken video output streams
  [media] mb86a20s: Fix estimate_rate setting
2013-04-26 08:17:07 -07:00
Linus Torvalds
96edcf31b3 Merge branch 'fixes-3.9-late' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull late parisc fixes from Helge Deller:
 "I know it's *very* late in the 3.9 release cycle, but since there
  aren't that many people testing the parisc linux kernel, a few (for
  our port) critical issues just showed up a few days back for the first
  time.

  What's in it?
   - add missing __ucmpdi2 symbol, which is required for btrfs on 32bit
     kernel.
   - change kunmap() macro to static inline function.  This fixes a
     debian/gcc-4.4 build error.
   - add locking when doing PTE updates.  This fixes random userspace
     crashes.
   - disable (optional) -mlong-calls compiler option for modules, else
     modules can't be loaded at runtime.
   - a smart patch by Will Deacon which fixes 64bit put_user() warnings
     on 32bit kernel."

* 'fixes-3.9-late' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: use spin_lock_irqsave/spin_unlock_irqrestore for PTE updates
  parisc: disable -mlong-calls compiler option for kernel modules
  parisc: uaccess: fix compiler warnings caused by __put_user casting
  parisc: Change kunmap macro to static inline function
  parisc: Provide __ucmpdi2 to resolve undefined references in 32 bit builds.
2013-04-26 08:05:01 -07:00
Matt Fleming
f464246d85 efivars: only check for duplicates on the registered list
variable_is_present() accesses '__efivars' directly, but when called via
gsmi_init() Michel reports observing the following crash,

  BUG: unable to handle kernel NULL pointer dereference at (null)
  IP: variable_is_present+0x55/0x170
  Call Trace:
    register_efivars+0x106/0x370
    gsmi_init+0x2ad/0x3da
    do_one_initcall+0x3f/0x170

The reason for the crash is that '__efivars' hasn't been initialised nor
has it been registered with register_efivars() by the time the google
EFI SMI driver runs.  The gsmi code uses its own struct efivars, and
therefore, a different variable list.  Fix the above crash by passing
the registered struct efivars to variable_is_present(), so that we
traverse the correct list.

Reported-by: Michel Lespinasse <walken@google.com>
Tested-by: Michel Lespinasse <walken@google.com>
Cc: Mike Waychison <mikew@google.com>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-26 08:02:03 -07:00
Jiri Slaby
37b7f3c765 TTY: fix atime/mtime regression
In commit b0de59b573 ("TTY: do not update atime/mtime on read/write")
we removed timestamps from tty inodes to fix a security issue and waited
if something breaks.  Well, 'w', the utility to find out logged users
and their inactivity time broke.  It shows that users are inactive since
the time they logged in.

To revert to the old behaviour while still preventing attackers to
guess the password length, we update the timestamps in one-minute
intervals by this patch.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-26 07:59:23 -07:00
Zhao Hongjiang
91d80a84bb aio: fix possible invalid memory access when DEBUG is enabled
dprintk() shouldn't access @ring after it's unmapped.

Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-26 07:56:18 -07:00
H. Peter Anvin
697dfd8844 Merge tag 'efi-urgent' into x86/urgent
* The EFI variable anti-bricking algorithm merged in -rc8 broke booting
   on some Apple machines because they implement EFI spec 1.10, which
   doesn't provide a QueryVariableInfo() runtime function and the logic
   used to check for the existence of that function was insufficient.
   Fix from Josh Boyer.

 * The anti-bricking algorithm also introduced a compiler warning on
   32-bit. Fix from Borislav Petkov.

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-04-25 14:00:22 -07:00
John David Anglin
bda079d336 parisc: use spin_lock_irqsave/spin_unlock_irqrestore for PTE updates
User applications running on SMP kernels have long suffered from instability
and random segmentation faults.  This patch improves the situation although
there is more work to be done.

One of the problems is the various routines in pgtable.h that update page table
entries use different locking mechanisms, or no lock at all (set_pte_at).  This
change modifies the routines to all use the same lock pa_dbit_lock.  This lock
is used for dirty bit updates in the interruption code. The patch also purges
the TLB entries associated with the PTE to ensure that inconsistent values are
not used after the page table entry is updated.  The UP and SMP code are now
identical.

The change also includes a minor update to the purge_tlb_entries function in
cache.c to improve its efficiency.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
2013-04-25 22:37:00 +02:00
Helge Deller
cf71130d63 parisc: disable -mlong-calls compiler option for kernel modules
CONFIG_MLONGCALLS was introduced in commit
ec758f9832 to overcome linker issues when linking
huge linux kernels, e.g. with many modules linked in.

But in the kernel module loader there is no support yet for the new relocation
types, which is why modules built with -mlong-calls can't be loaded.
Furthermore, for modules long calls are not really necessary, since we already
use stub sections which resolve long distance calls.

So, let's just disable this compiler option when compiling kernel modules.

Signed-off-by: Helge Deller <deller@gmx.de>
2013-04-25 22:36:50 +02:00
Will Deacon
0f28b62890 parisc: uaccess: fix compiler warnings caused by __put_user casting
When targetting 32-bit processors, __put_user emits a pair of stw
instructions for the 8-byte case. If the type of __val is a pointer, the
marshalling code casts it to the wider integer type of u64, resulting
in the following compiler warnings:

  kernel/signal.c: In function 'copy_siginfo_to_user':
  kernel/signal.c:2752:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
  kernel/signal.c:2752:11: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
  [...]

This patch fixes the warnings by removing the marshalling code and using
the correct output modifiers in the __put_{user,kernel}_asm64 macros
so that GCC will allocate the right registers without the need to
extract the two words explicitly.

Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Helge Deller <deller@gmx.de>
2013-04-25 22:36:42 +02:00
John David Anglin
87be2f88b2 parisc: Change kunmap macro to static inline function
Change kunmap macro to static inline function to fix build error
compiling drivers/base/dma-buf.c.

Without the change, the following error can occur:

   CC      drivers/base/dma-buf.o
drivers/base/dma-buf.c: In function 'dma_buf_kunmap':
drivers/base/dma-buf.c:427:46:
error: macro "kunmap" passed 3 arguments, but takes just 1

I believe parisc is the only arch to implement kunmap using a macro.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>
2013-04-25 22:36:31 +02:00
John David Anglin
ca0ad83da1 parisc: Provide __ucmpdi2 to resolve undefined references in 32 bit builds.
The Debian experimental linux source package (3.8.5-1) build fails
with the following errors:
...
MODPOST 2016 modules
ERROR: "__ucmpdi2" [fs/btrfs/btrfs.ko] undefined!
ERROR: "__ucmpdi2" [drivers/md/dm-verity.ko] undefined!

The attached patch resolves this problem.  It is based on the s390
implementation of ucmpdi2.c.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Cc: "James E.J. Bottomley" <jejb@parisc-linux.org>
Signed-off-by: Helge Deller <deller@gmx.de>
2013-04-25 22:36:15 +02:00
Linus Torvalds
0fbd06761f Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
Pull sparc fix from David Miller:
 "Brown paper bag fix for sparc64"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix missing put_cpu_var() in tlb_batch_add_one() when not batching.
2013-04-24 17:10:18 -07:00
Linus Torvalds
3c71d03a28 Merge tag 'gpio-v3.9-lastminute' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull gpi fix from Linus Walleij:
 "This is a last minute revert for the GPIO tree, as Mike Dunn noticed
  breakage on some older PXA machines due to moving PXA GPIO initcalls
  to the module_init initlevel"

* tag 'gpio-v3.9-lastminute' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  Revert "gpio: pxa: set initcall level to module init"
2013-04-24 17:01:58 -07:00
David S. Miller
f0af97070a sparc64: Fix missing put_cpu_var() in tlb_batch_add_one() when not batching.
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-24 16:52:18 -07:00
Linus Walleij
cf3fa17c20 Revert "gpio: pxa: set initcall level to module init"
This reverts commit 6c7e660a27.

The commit causes breakage on several older PXA machines.

Reported-by: Mike Dunn <mikedunn@newsguy.com>
Acked-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-04-24 21:42:24 +02:00
Josh Boyer
f697036b93 efi: Check EFI revision in setup_efi_vars
We need to check the runtime sys_table for the EFI version the firmware
specifies instead of just checking for a NULL QueryVariableInfo.  Older
implementations of EFI don't have QueryVariableInfo but the runtime is
a smaller structure, so the pointer to it may be pointing off into garbage.

This is apparently the case with several Apple firmwares that support EFI
1.10, and the current check causes them to no longer boot.  Fix based on
a suggestion from Matthew Garrett.

Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-04-24 16:19:01 +01:00
Borislav Petkov
51f8fbba64 x86, efi: Fix a build warning
Fix this:

arch/x86/boot/compressed/eboot.c: In function ‘setup_efi_vars’:
arch/x86/boot/compressed/eboot.c:269:2: warning: passing argument 1 of ‘efi_call_phys’ makes pointer from integer without a cast [enabled by default]
In file included from arch/x86/boot/compressed/eboot.c:12:0:
/w/kernel/linux/arch/x86/include/asm/efi.h:8:33: note: expected ‘void *’ but argument is of type ‘long unsigned int’

after cc5a080c5d ("efi: Pass boot services variable info to runtime
code").

Reported-by: Paul Bolle <pebolle@tiscali.nl>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-04-24 11:57:15 +01:00
Linus Torvalds
824282ca7d Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS fix from Ralf Baechle:
 "Revert the change of the definition of PAGE_MASK which was prettier
  but broke a few relativly rare platforms"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  Revert "MIPS: page.h: Provide more readable definition for PAGE_MASK."
2013-04-22 15:00:59 -07:00
Ralf Baechle
3b5e50edaf Revert "MIPS: page.h: Provide more readable definition for PAGE_MASK."
This reverts commit c17a655478.

Manuel Lauss writes:

lmo commit c17a6554 (MIPS: page.h: Provide more readable definition for
PAGE_MASK) apparently breaks ioremap of 36-bit addresses on my Alchemy
systems (PCI and PCMCIA) The reason is that in arch/mips/mm/ioremap.c
line 157  (phys_addr &= PAGE_MASK) bits 32-35 are cut off.  Seems the
new PAGE_MASK is explicitly 32bit, or one could make it signed instead
of unsigned long.
2013-04-22 18:09:35 +02:00
Rusty Russell
f83b293366 kernel/hz.bc: ignore.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-22 07:09:06 -07:00
Linus Torvalds
7790ff45be Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
 "This fixes a kernel memory leak in the algif interface"

* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: algif - suppress sending source address information in recvmsg
2013-04-22 07:07:46 -07:00
Linus Torvalds
60d509fa6a Linux 3.9-rc8 2013-04-21 14:38:45 -07:00
Linus Torvalds
3125929454 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
 "Misc fixes"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86: Fix offcore_rsp valid mask for SNB/IVB
  perf: Treat attr.config as u64 in perf_swevent_init()
2013-04-21 10:25:42 -07:00
Linus Torvalds
12c71c4b60 Merge branch 'vm_ioremap_memory-examples'
I'm going to do an -rc8, so I'm just going to do this rather than delay
it any further. They are arguably stable material anyway.

* vm_ioremap_memory-examples:
  mtdchar: remove no-longer-used vma helpers
  vm: convert snd_pcm_lib_mmap_iomem() to vm_iomap_memory() helper
  vm: convert fb_mmap to vm_iomap_memory() helper
  vm: convert mtdchar mmap to vm_iomap_memory() helper
  vm: convert HPET mmap to vm_iomap_memory() helper
2013-04-21 10:16:56 -07:00
Paul E. McKenney
c79aa0d965 events: Protect access via task_subsys_state_check()
The following RCU splat indicates lack of RCU protection:

[  953.267649] ===============================
[  953.267652] [ INFO: suspicious RCU usage. ]
[  953.267657] 3.9.0-0.rc6.git2.4.fc19.ppc64p7 #1 Not tainted
[  953.267661] -------------------------------
[  953.267664] include/linux/cgroup.h:534 suspicious rcu_dereference_check() usage!
[  953.267669]
[  953.267669] other info that might help us debug this:
[  953.267669]
[  953.267675]
[  953.267675] rcu_scheduler_active = 1, debug_locks = 0
[  953.267680] 1 lock held by glxgears/1289:
[  953.267683]  #0:  (&sig->cred_guard_mutex){+.+.+.}, at: [<c00000000027f884>] .prepare_bprm_creds+0x34/0xa0
[  953.267700]
[  953.267700] stack backtrace:
[  953.267704] Call Trace:
[  953.267709] [c0000001f0d1b6e0] [c000000000016e30] .show_stack+0x130/0x200 (unreliable)
[  953.267717] [c0000001f0d1b7b0] [c0000000001267f8] .lockdep_rcu_suspicious+0x138/0x180
[  953.267724] [c0000001f0d1b840] [c0000000001d43a4] .perf_event_comm+0x4c4/0x690
[  953.267731] [c0000001f0d1b950] [c00000000027f6e4] .set_task_comm+0x84/0x1f0
[  953.267737] [c0000001f0d1b9f0] [c000000000280414] .setup_new_exec+0x94/0x220
[  953.267744] [c0000001f0d1ba70] [c0000000002f665c] .load_elf_binary+0x58c/0x19b0
...

This commit therefore adds the required RCU read-side critical
section to perf_event_comm().

Reported-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: a.p.zijlstra@chello.nl
Cc: paulus@samba.org
Cc: acme@ghostprotocols.net
Link: http://lkml.kernel.org/r/20130419190124.GA8638@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Gustavo Luiz Duarte <gusld@br.ibm.com>
2013-04-21 11:21:39 +02:00
Linus Torvalds
830ac8524f Merge branch 'x86-kdump-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull kdump fixes from Peter Anvin:
 "The kexec/kdump people have found several problems with the support
  for loading over 4 GiB that was introduced in this merge cycle.  This
  is partly due to a number of design problems inherent in the way the
  various pieces of kdump fit together (it is pretty horrifically manual
  in many places.)

  After a *lot* of iterations this is the patchset that was agreed upon,
  but of course it is now very late in the cycle.  However, because it
  changes both the syntax and semantics of the crashkernel option, it
  would be desirable to avoid a stable release with the broken
  interfaces."

I'm not happy with the timing, since originally the plan was to release
the final 3.9 tomorrow.  But apparently I'm doing an -rc8 instead...

* 'x86-kdump-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  kexec: use Crash kernel for Crash kernel low
  x86, kdump: Change crashkernel_high/low= to crashkernel=,high/low
  x86, kdump: Retore crashkernel= to allocate under 896M
  x86, kdump: Set crashkernel_low automatically
2013-04-20 18:40:36 -07:00
Linus Torvalds
db93f8b420 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:
 "Three groups of fixes:

   1. Make sure we don't execute the early microcode patching if family
      < 6, since it would touch MSRs which don't exist on those
      families, causing crashes.

   2. The Xen partial emulation of HyperV can be dealt with more
      gracefully than just disabling the driver.

   3. More EFI variable space magic.  In particular, variables hidden
      from runtime code need to be taken into account too."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, microcode: Verify the family before dispatching microcode patching
  x86, hyperv: Handle Xen emulation of Hyper-V more gracefully
  x86,efi: Implement efi_no_storage_paranoia parameter
  efi: Export efi_query_variable_store() for efivars.ko
  x86/Kconfig: Make EFI select UCS2_STRING
  efi: Distinguish between "remaining space" and actually used space
  efi: Pass boot services variable info to runtime code
  Move utf16 functions to kernel core and rename
  x86,efi: Check max_size only if it is non-zero.
  x86, efivars: firmware bug workarounds should be in platform code
2013-04-20 18:38:48 -07:00
Linus Torvalds
8c3a13c84b Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM fixes from Russell King:
 "A set of fixes from various people - Will Deacon gets a prize for
  removing code this time around.  The biggest fix in this lot is
  sorting out the ARM740T mess.  The rest are relatively small fixes."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7699/1: sched_clock: Add more notrace to prevent recursion
  ARM: 7698/1: perf: fix group validation when using enable_on_exec
  ARM: 7697/1: hw_breakpoint: do not use __cpuinitdata for dbg_cpu_pm_nb
  ARM: 7696/1: Fix kexec by setting outer_cache.inv_all for Feroceon
  ARM: 7694/1: ARM, TCM: initialize TCM in paging_init(), instead of setup_arch()
  ARM: 7692/1: iop3xx: move IOP3XX_PERIPHERAL_VIRT_BASE
  ARM: modules: don't export cpu_set_pte_ext when !MMU
  ARM: mm: remove broken condition check for v4 flushing
  ARM: mm: fix numerous hideous errors in proc-arm740.S
  ARM: cache: remove ARMv3 support code
  ARM: tlbflush: remove ARMv3 support
2013-04-20 18:38:06 -07:00
Linus Torvalds
851b3f3238 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc
Pull sparc fixes from David Miller:

 1) Fix race in sparc64 TLB shootdowns, we have to synchronize with the
    sibling cpus completing if we are passing them a reference via
    pointer to a data structure.

 2) Fix cleaning of bitmaps in sparc32, from Akinobu Mita.

 3) Fix various sparc header mistakes, some of which resulted in
    userland build breakage.  From Sam Ravnborg.

 4) Kill ghost declarations and defines missed when several bits of code
    got deleted recently.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix race in TLB batch processing.
  sparc: use asm-generic version of types.h
  bbc_i2c: fix section mismatch warning
  sparc: use generic headers
  sparc:cleanup unused code in smp_32.h
  sparc/iommu: fix typo s/265KB/256KB/
  sparc/srmmu: clear trailing edge of bitmap properly
  sparc:remove unused declaration smp_boot_cpus()
2013-04-20 18:23:08 -07:00
Linus Torvalds
c437d888c7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking updates from David Miller:

 1) ax88796 does 64-bit divides which causes link errors on ARM, fix
    from Arnd Bergmann.

 2) Once an improper offload setting is detected on an SKB we don't rate
    limit the log message so we can very easily live lock.  From Ben
    Greear.

 3) Openvswitch cannot report vport configuration changes reliably
    because it didn't preallocate the netlink notification message
    before changing state.  From Jesse Gross.

 4) The effective UID/GID SCM credentials fix, from Linus.

 5) When a user explicitly asks for wireless authentication, cfg80211
    isn't told about the AP detachment leaving inconsistent state.  Fix
    from Johannes Berg.

 6) Fix self-MAC checks in batman-adv on multi-mesh nodes, from Antonio
    Quartulli.

 7) Revert build_skb() change sin IGB driver, can result in memory
    corruption.  From Alexander Duyck.

 8) Fix setting VLANs on virtual functions in IXGBE, from Greg Rose.

 9) Fix TSO races in qlcnic driver, from Sritej Velaga.

10) In bnx2x the kernel driver and UNDI firmware can try to program the
    chip at the same time, resulting in corruption.  Add proper
    synchronization.  From Dmitry Kravkov.

11) Fix corruption of status block in firmware ram in bxn2x, from Ariel
    Elior.

12) Fix load balancing hash regression of bonding driver in forwarding
    configurations, from Eric Dumazet.

13) Fix TS ECR regression in TCP by calling tcp_replace_ts_recent() in
    all the right spots, from Eric Dumazet.

14) Fix several bonding bugs having to do with address manintainence,
    including not removing address when configuration operations
    encounter errors, missed locking on the address lists, missing
    refcounting on VLAN objects, etc.  All from Nikolay Aleksandrov.

15) Add workarounds for firmware bugs in LTE qmi_wwan devices, wherein
    the devices fail to add a proper ethernet header while on LTE
    networks but otherwise properly do so on 2G and 3G ones.  From Bjørn
    Mork.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits)
  net: fix incorrect credentials passing
  net: rate-limit warn-bad-offload splats.
  net: ax88796: avoid 64 bit arithmetic
  qlge: Update version to 1.00.00.32.
  qlge: Fix ethtool autoneg advertising.
  qlge: Fix receive path to drop error frames
  net: qmi_wwan: prevent duplicate mac address on link (firmware bug workaround)
  net: qmi_wwan: fixup destination address (firmware bug workaround)
  net: qmi_wwan: fixup missing ethernet header (firmware bug workaround)
  bonding: in bond_mc_swap() bond's mc addr list is walked without lock
  bonding: disable netpoll on enslave failure
  bonding: primary_slave & curr_active_slave are not cleaned on enslave failure
  bonding: vlans don't get deleted on enslave failure
  bonding: mc addresses don't get deleted on enslave failure
  pkt_sched: fix error return code in fw_change_attrs()
  irda: small read past the end of array in debug code
  tcp: call tcp_replace_ts_recent() from tcp_ack()
  netfilter: xt_rpfilter: skip locally generated broadcast/multicast, too
  netfilter: ipset: bitmap:ip,mac: fix listing with timeout
  bonding: fix l23 and l34 load balancing in forwarding path
  ...
2013-04-20 18:21:05 -07:00
Linus Torvalds
83f1b4ba91 net: fix incorrect credentials passing
Commit 257b5358b3 ("scm: Capture the full credentials of the scm
sender") changed the credentials passing code to pass in the effective
uid/gid instead of the real uid/gid.

Obviously this doesn't matter most of the time (since normally they are
the same), but it results in differences for suid binaries when the wrong
uid/gid ends up being used.

This just undoes that (presumably unintentional) part of the commit.

Reported-by: Andy Lutomirski <luto@amacapital.net>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Serge E. Hallyn <serge@hallyn.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-20 16:56:42 -04:00
H. Peter Anvin
c0a9f451e4 Merge remote-tracking branch 'efi/urgent' into x86/urgent
Matt Fleming (1):
      x86, efivars: firmware bug workarounds should be in platform
      code

Matthew Garrett (3):
      Move utf16 functions to kernel core and rename
      efi: Pass boot services variable info to runtime code
      efi: Distinguish between "remaining space" and actually used
      space

Richard Weinberger (2):
      x86,efi: Check max_size only if it is non-zero.
      x86,efi: Implement efi_no_storage_paranoia parameter

Sergey Vlasov (2):
      x86/Kconfig: Make EFI select UCS2_STRING
      efi: Export efi_query_variable_store() for efivars.ko

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-04-19 17:09:03 -07:00
H. Peter Anvin
74c3e3fcf3 x86, microcode: Verify the family before dispatching microcode patching
For each CPU vendor that implements CPU microcode patching, there will
be a minimum family for which this is implemented.  Verify this
minimum level of support.

This can be done in the dispatch function or early in the application
functions.  Doing the latter turned out to be somewhat awkward because
of the ineviable split between the BSP and the AP paths, and rather
than pushing deep into the application functions, do this in
the dispatch function.

Reported-by: "Bryan O'Donoghue" <bryan.odonoghue.lkml@nexus-software.ie>
Suggested-by: Borislav Petkov <bp@alien8.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Link: http://lkml.kernel.org/r/1366392183-4149-1-git-send-email-bryan.odonoghue.lkml@nexus-software.ie
2013-04-19 16:36:03 -07:00
Ben Greear
c846ad9b88 net: rate-limit warn-bad-offload splats.
If one does do something unfortunate and allow a
bad offload bug into the kernel, this the
skb_warn_bad_offload can effectively live-lock the
system, filling the logs with the same error over
and over.

Add rate limitation to this so that box remains otherwise
functional in this case.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 17:57:49 -04:00
Arnd Bergmann
b261c20fe0 net: ax88796: avoid 64 bit arithmetic
When building ax88796 on an ARM platform with 64-bit resource_size_t,
we currently get

drivers/net/ethernet/8390/ax88796.c:875: undefined reference to `__aeabi_uldivmod'

because we do a division on the length of the MMIO resource.
Since we know that this resource is very short, using an
"unsigned long" instead of "resource_size_t" is entirely
sufficient, and avoids this link-time error.

Cc: Ben Dooks <ben-linux@fluff.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 17:57:48 -04:00
Jitendra Kalsaria
e393ce5780 qlge: Update version to 1.00.00.32.
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 17:53:57 -04:00
Jitendra Kalsaria
c5e991af93 qlge: Fix ethtool autoneg advertising.
Autoneg is supported on specific port types only. Fix the driver to advertise
autoneg based on the port type.

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 17:53:56 -04:00
Sritej Velaga
ae721f3ab0 qlge: Fix receive path to drop error frames
o Fix the driver to drop error frames in the receive path
o Update error counter which was not getting incremented

Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 17:53:56 -04:00
David S. Miller
b79d4a8dfd Merge branch 'qmi_wwan'
Bjørn Mork says:

====================
This series adds workarounds for 3 different firmware bugs, each
preventing the affected devices from working at all. I therefore
humbly request that these fixes go to stable-3.8 (if still
maintained) and 3.9 (either via net if still possible, or via
stable if not).

All 3 workarounds are applied to all devices supported by the driver.
Adding quirks for specific devices was considered as an alternative,
but was rejected because we have too little information about the
exact distribution of the buggy firmwares. All we know is that the
same bug shows up in devices from at least 3 different, and presumably
independent, vendors.

The workarounds have instead been designed to automatically apply
when necessary, and to have as little impact as possible on unaffected
devices.  The series has been tested on a number of devices both with
and without these bugs.

The series should apply cleanly to net/master, net-next/master and
stable/linux-3.8.y
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 17:51:26 -04:00
Bjørn Mork
cc6ba5fdaa net: qmi_wwan: prevent duplicate mac address on link (firmware bug workaround)
We normally trust and use the CDC functional descriptors provided by a
number of devices.  But some of these will erroneously list the address
reserved for the device end of the link.  Attempting to use this on
both the device and host side will naturally not work.

Work around this bug by ignoring the functional descriptor and assign a
random address instead in this case.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 17:51:17 -04:00
Bjørn Mork
6483bdc9d7 net: qmi_wwan: fixup destination address (firmware bug workaround)
Received packets are sometimes addressed to 00:a0:c6:00:00:00
instead of the address the device firmware should have learned
from the host:

321.224126 77.16.85.204 -> 148.122.171.134 ICMP 98 Echo (ping) request  id=0x4025, seq=64/16384, ttl=64

0000  82 c0 82 c9 f1 67 82 c0 82 c9 f1 67 08 00 45 00   .....g.....g..E.
0010  00 54 00 00 40 00 40 01 57 cc 4d 10 55 cc 94 7a   .T..@.@.W.M.U..z
0020  ab 86 08 00 62 fc 40 25 00 40 b2 bc 6e 51 00 00   ....b.@%.@..nQ..
0030  00 00 6b bd 09 00 00 00 00 00 10 11 12 13 14 15   ..k.............
0040  16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25   .......... !"#$%
0050  26 27 28 29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35   &'()*+,-./012345
0060  36 37                                             67

321.240607 148.122.171.134 -> 77.16.85.204 ICMP 98 Echo (ping) reply    id=0x4025, seq=64/16384, ttl=55

0000  00 a0 c6 00 00 00 02 50 f3 00 00 00 08 00 45 00   .......P......E.
0010  00 54 00 56 00 00 37 01 a0 76 94 7a ab 86 4d 10   .T.V..7..v.z..M.
0020  55 cc 00 00 6a fc 40 25 00 40 b2 bc 6e 51 00 00   U...j.@%.@..nQ..
0030  00 00 6b bd 09 00 00 00 00 00 10 11 12 13 14 15   ..k.............
0040  16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25   .......... !"#$%
0050  26 27 28 29 2a 2b 2c 2d 2e 2f 30 31 32 33 34 35   &'()*+,-./012345
0060  36 37                                             67

The bogus address is always the same, and matches the address
suggested by many devices as a default address.  It is likely a
hardcoded firmware default.

The circumstances where this bug has been observed indicates that
the trigger is related to timing or some other factor the host
cannot control. Repeating the exact same configuration sequence
that caused it to trigger once, will not necessarily cause it to
trigger the next time. Reproducing the bug is therefore difficult.
This opens up a possibility that the bug is more common than we can
confirm, because affected devices often will work properly again
after a reset.  A procedure most users are likely to try out before
reporting a bug.

Unconditionally rewriting the destination address if the first digit
of the received packet is 0, is considered an acceptable compromise
since we already have to inspect this digit.  The simplification will
cause unnecessary rewrites if the real address starts with 0, but this
is still better than adding additional tests for this particular case.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 17:51:17 -04:00
Bjørn Mork
6ff509af38 net: qmi_wwan: fixup missing ethernet header (firmware bug workaround)
A number of LTE devices from different vendors all suffer from the
same firmware bug: Most of the packets received from the device while
it is attached to a LTE network will not have an ethernet header. The
devices work as expected when attached to 2G or 3G networks, sending
an ethernet header with all packets.

This driver is not aware of which network the modem attached to, and
even if it were there are still some packet types which are always
received with the header intact.

All devices supported by this driver have severely limited
networking capabilities:
 - can only transmit IPv4, IPv6 and possibly ARP
 - can only support a single host hardware address at any time
 - will only do point-to-point communcation with the host

Because of this, we are able to reliably identify any bogus raw IP
packets by simply looking at the 4 IP version bits.  All we need to
do is to avoid 4 or 6 in the first digit of the mac address.  This
workaround ensures this, and fix up the received packets as necessary.

Given the distribution of the bug, it is believed that the source is
the chipset vendor.  The devices which are verified to be affected are:
 Huawei E392u-12 (Qualcomm MDM9200)
 Pantech UML290  (Qualcomm MDM9600)
 Novatel USB551L (Qualcomm MDM9600)
 Novatel E362    (Qualcomm MDM9600)

It is believed that the bug depend on firmware revision, which means
that possibly all devices based on the above mentioned chipset may be
affected if we consider all available firmware revisions.

The information about affected devices and versions is likely
incomplete.  As the additional overhead for packets not needing this
fixup is very small, it is considered acceptable to apply the
workaround to all devices handled by this driver.

Reported-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 17:51:16 -04:00
David S. Miller
0cb670eef5 Merge branch 'bonding'
Nikolay Aleksandrov says:

====================
This patch-set fixes mainly bugs on enslave failure and one occasion
of a needed locking. The patches are:

	1. On enslave failure mc addresses are not flushed from the slave
	2. On enslave failure vlans are not cleaned up from the slave
	3. On enslave failure the bond's primary and curr_active_slave
	   are not cleaned up (which might result in use of freed memory)
	4. On enslave failure netpoll is not disabled which might result in
	   a memory leak
	5. In bond_mc_swap() the bond's mc addr list is walked without
	   netif_addr_lock, since it can be called without rtnl, add it

v2: patch 01 - fix log message and remove unnecessary code move
====================

Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 17:49:11 -04:00
nikolay@redhat.com
d632ce989c bonding: in bond_mc_swap() bond's mc addr list is walked without lock
Use netif_addr_lock_bh() to acquire the appropriate lock before walking.

Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 17:48:19 -04:00
nikolay@redhat.com
fc7a72ac86 bonding: disable netpoll on enslave failure
slave_disable_netpoll() is not called upon enslave failure which would
lead to a memory leak. Call slave_disable_netpoll() after err_detach as
that's the first error path after enabling netpoll on that slave.

Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 17:48:19 -04:00
nikolay@redhat.com
3c5913b53f bonding: primary_slave & curr_active_slave are not cleaned on enslave failure
On enslave failure primary_slave can point to new_slave which is to be
freed, and the same applies to curr_active_slave. So check if this is
the case and clean up properly after err_detach because that's the first
error code path after they're set.

Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 17:48:19 -04:00
nikolay@redhat.com
a506e7b479 bonding: vlans don't get deleted on enslave failure
The main problem is with vid refcount which only gets bumped up.
Delete the vlans after err_detach as that's the first error path
after the vlans are added.

Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 17:48:18 -04:00
nikolay@redhat.com
25e40305d4 bonding: mc addresses don't get deleted on enslave failure
Add bond_mc_list_flush() after err_detach as that's the first error path
after the addresses are added. The main issue is the mc addresses' refcount
which only gets bumped up.

v2: update log message and don't move code unnecessarily

Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 17:48:18 -04:00
Wei Yongjun
cb95ec6261 pkt_sched: fix error return code in fw_change_attrs()
Fix to return -EINVAL when tb[TCA_FW_MASK] is set and head->mask != 0xFFFFFFFF
instead of 0 (ifdef CONFIG_NET_CLS_IND and tb[TCA_FW_INDEV]), as done elsewhere
in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 17:34:53 -04:00
Dan Carpenter
e15465e180 irda: small read past the end of array in debug code
The "reason" can come from skb->data[] and it hasn't been capped so it
can be from 0-255 instead of just 0-6.  For example in irlmp_state_dtr()
the code does:

	reason = skb->data[3];
	...
	irlmp_disconnect_indication(self, reason, skb);

Also LMREASON has a couple other values which don't have entries in the
irlmp_reasons[] array.  And 0xff is a valid reason as well which means
"unknown".

So far as I can see we don't actually care about "reason" except for in
the debug code.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 17:32:31 -04:00
David S. Miller
f36391d279 sparc64: Fix race in TLB batch processing.
As reported by Dave Kleikamp, when we emit cross calls to do batched
TLB flush processing we have a race because we do not synchronize on
the sibling cpus completing the cross call.

So meanwhile the TLB batch can be reset (tb->tlb_nr set to zero, etc.)
and either flushes are missed or flushes will flush the wrong
addresses.

Fix this by using generic infrastructure to synchonize on the
completion of the cross call.

This first required getting the flush_tlb_pending() call out from
switch_to() which operates with locks held and interrupts disabled.
The problem is that smp_call_function_many() cannot be invoked with
IRQs disabled and this is explicitly checked for with WARN_ON_ONCE().

We get the batch processing outside of locked IRQ disabled sections by
using some ideas from the powerpc port. Namely, we only batch inside
of arch_{enter,leave}_lazy_mmu_mode() calls.  If we're not in such a
region, we flush TLBs synchronously.

1) Get rid of xcall_flush_tlb_pending and per-cpu type
   implementations.

2) Do TLB batch cross calls instead via:

	smp_call_function_many()
		tlb_pending_func()
			__flush_tlb_pending()

3) Batch only in lazy mmu sequences:

	a) Add 'active' member to struct tlb_batch
	b) Define __HAVE_ARCH_ENTER_LAZY_MMU_MODE
	c) Set 'active' in arch_enter_lazy_mmu_mode()
	d) Run batch and clear 'active' in arch_leave_lazy_mmu_mode()
	e) Check 'active' in tlb_batch_add_one() and do a synchronous
           flush if it's clear.

4) Add infrastructure for synchronous TLB page flushes.

	a) Implement __flush_tlb_page and per-cpu variants, patch
	   as needed.
	b) Likewise for xcall_flush_tlb_page.
	c) Implement smp_flush_tlb_page() to invoke the cross-call.
	d) Wire up global_flush_tlb_page() to the right routine based
           upon CONFIG_SMP

5) It turns out that singleton batches are very common, 2 out of every
   3 batch flushes have only a single entry in them.

   The batch flush waiting is very expensive, both because of the poll
   on sibling cpu completeion, as well as because passing the tlb batch
   pointer to the sibling cpus invokes a shared memory dereference.

   Therefore, in flush_tlb_pending(), if there is only one entry in
   the batch perform a completely asynchronous global_flush_tlb_page()
   instead.

Reported-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Dave Kleikamp <dave.kleikamp@oracle.com>
2013-04-19 17:26:26 -04:00
Stephen Boyd
cea15092f0 ARM: 7699/1: sched_clock: Add more notrace to prevent recursion
cyc_to_sched_clock() is called by sched_clock() and cyc_to_ns()
is called by cyc_to_sched_clock(). I suspect that some compilers
inline both of these functions into sched_clock() and so we've
been getting away without having a notrace marking. It seems that
my compiler isn't inlining cyc_to_sched_clock() though, so I'm
hitting a recursion bug when I enable the function graph tracer,
causing my system to crash. Marking these functions notrace fixes
it. Technically cyc_to_ns() doesn't need the notrace because it's
already marked inline, but let's just add it so that if we ever
remove inline from that function it doesn't blow up.

Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-04-19 22:23:55 +01:00
Linus Torvalds
f068f5e158 Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
 "Only one remaining fix for arm-soc platforms at this time, a small
  bugfix for cpu hotplug on highbank platforms that has become much
  easier to hit as of late.

  Details in the patch description, but it's small and well-contained
  and definitely impacts users of the platform, so 3.9 seems
  appropriate."

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: highbank: fix cache flush ordering for cpu hotplug
2013-04-19 11:38:36 -07:00
David S. Miller
fd7fc25328 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
If time allows, please consider pulling the following patchset contains two
late Netfilter fixes, they are:

* Skip broadcast/multicast locally generated traffic in the rpfilter,
  (closes netfilter bugzilla #814), from Florian Westphal.

* Fix missing elements in the listing of ipset bitmap ip,mac set
  type with timeout support enabled, from Jozsef Kadlecsik.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 14:24:47 -04:00
David S. Miller
6a4cd3fde5 Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
John W. Linville says:

====================
A few stragglers hoping for 3.9, somewhat delayed due to my travels...

On the mac80211 bits, Johannes says:

"Sadly, I have another pull request -- the idle handling fix broke LED
handling in some cases."

and:

"Yet one more!

This fixes a fairly important/annoying bug -- when roaming between
multiple APs of the same network, the system could get stuck thinking it
was connected to the old one while it really wasn't."

On top of that...

Arend sends a brcmfmac patch that removes advertising a feature that
isn't actually fully supported, and a brcmsmac patch that rearranges
code to request firmware at IFF_UP to play more nicely with being
built into the kernel.

Felix gives us a minor ath9k_htc fix to support the newly released
open source firmware, and an ath9k_hw initvals fix to improve device
stability.

Rafał Miłecki provides a fix for an ssb regression that caused a
serious performance problem with b43.

Zefir Kurtisi offers an ath9k fix to change some kmalloc flags to
allow the DFS detector to be called in softirq context.

Please let me know if there are problems.  If these don't make 3.9,
I'll just pull them into wireless-next -- just let me know if you
want to do it that way!
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 14:23:55 -04:00
Eric Dumazet
12fb3dd9dc tcp: call tcp_replace_ts_recent() from tcp_ack()
commit bd090dfc63 (tcp: tcp_replace_ts_recent() should not be called
from tcp_validate_incoming()) introduced a TS ecr bug in slow path
processing.

1 A > B P. 1:10001(10000) ack 1 <nop,nop,TS val 1001 ecr 200>
2 B < A . 1:1(0) ack 1 win 257 <sack 9001:10001,TS val 300 ecr 1001>
3 A > B . 1:1001(1000) ack 1 win 227 <nop,nop,TS val 1002 ecr 200>
4 A > B . 1001:2001(1000) ack 1 win 227 <nop,nop,TS val 1002 ecr 200>

(ecr 200 should be ecr 300 in packets 3 & 4)

Problem is tcp_ack() can trigger send of new packets (retransmits),
reflecting the prior TSval, instead of the TSval contained in the
currently processed incoming packet.

Fix this by calling tcp_replace_ts_recent() from tcp_ack() after the
checks, but before the actions.

Reported-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-19 14:21:53 -04:00
Linus Torvalds
f86b11fbc7 mtdchar: remove no-longer-used vma helpers
With the conversion to vm_iomap_memory(), these vma helpers are no
longer used.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-19 10:05:39 -07:00
Linus Torvalds
0fe09a45c4 vm: convert snd_pcm_lib_mmap_iomem() to vm_iomap_memory() helper
This is my example conversion of a few existing mmap users.  The pcm
mmap case is one of the more straightforward ones.

Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-19 10:01:04 -07:00
Linus Torvalds
fc9bbca8f6 vm: convert fb_mmap to vm_iomap_memory() helper
This is my example conversion of a few existing mmap users.  The
fb_mmap() case is a good example because it is a bit more complicated
than some: fb_mmap() mmaps one of two different memory areas depending
on the page offset of the mmap (but happily there is never any mixing of
the two, so the helper function still works).

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-19 09:57:35 -07:00
Linus Torvalds
8558e4a26b vm: convert mtdchar mmap to vm_iomap_memory() helper
This is my example conversion of a few existing mmap users.  The mtdchar
case is actually disabled right now (and stays disabled), but I did it
because it showed up on my "git grep", and I was familiar with the code
due to fixing an overflow problem in the code in commit 9c603e53d3
("mtdchar: fix offset overflow detection").

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-19 09:53:07 -07:00
Linus Torvalds
2323036dfe vm: convert HPET mmap to vm_iomap_memory() helper
This is my example conversion of a few existing mmap users.  The HPET
case is simple, widely available, and easy to test (Clemens Ladisch sent
a trivial test-program for it).

Test-program-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-19 09:46:39 -07:00
Linus Torvalds
0f177f8739 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
 "Two more small fixups to the wacom driver"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: wacom - fix "can not retrieve extra class descriptor" for DTH2242
  Input: wacom - DTH2242 Grip Pen id was off by one bit
2013-04-19 09:15:13 -07:00
Linus Torvalds
53d945e1a2 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse build fix from Miklos Szeredi:
 "This fixes android builds.  The patch appears large, but is just
  search & replace."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: fix type definitions in uapi header
2013-04-19 09:12:55 -07:00
Ping Cheng
5846115b30 Input: wacom - fix "can not retrieve extra class descriptor" for DTH2242
Same as Cintiq 24HDT, DTH2242 has two interfaces sharing one configuration.
This patch ignores the second interface.

Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-19 08:52:41 -07:00
Ping Cheng
1582eea208 Input: wacom - DTH2242 Grip Pen id was off by one bit
Signed-off-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-19 08:52:28 -07:00
Linus Torvalds
6835039d7e Merge branch 'userns-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux
Pull user-namespace fixes from Andy Lutomirski.

* 'userns-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux:
  userns: Changing any namespace id mappings should require privileges
  userns: Check uid_map's opener's fsuid, not the current fsuid
  userns: Don't let unprivileged users trick privileged users into setting the id_map
2013-04-18 18:09:12 -07:00
Linus Torvalds
a86d52667d Merge branch 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86
Pull x86 platform driver revert from Matthew Garrett:
 "It turns out that one of the hp-wmi patches this cycle breaks some
  other HP laptops.  I think we have a good idea how to work on it for
  3.10, but it's safer to just revert it for now."

* 'for_linus' of git://cavan.codon.org.uk/platform-drivers-x86:
  Revert "hp-wmi: Add support for SMBus hotkeys"
2013-04-18 15:14:34 -07:00
Florian Westphal
f83a7ea207 netfilter: xt_rpfilter: skip locally generated broadcast/multicast, too
Alex Efros reported rpfilter module doesn't match following packets:
IN=br.qemu SRC=192.168.2.1 DST=192.168.2.255 [ .. ]
(netfilter bugzilla #814).

Problem is that network stack arranges for the locally generated broadcasts
to appear on the interface they were sent out, so the IFF_LOOPBACK check
doesn't trigger.

As -m rpfilter is restricted to PREROUTING, we can check for existing
rtable instead, it catches locally-generated broad/multicast case, too.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-19 00:11:59 +02:00
Matthew Garrett
c857b7f45b Revert "hp-wmi: Add support for SMBus hotkeys"
This reverts commit fabf85e3ca which breaks
hotkey support on some other HP laptops. We'll try doing this differently
in 3.10.

Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
2013-04-18 14:53:10 -07:00
Jozsef Kadlecsik
5add189a12 netfilter: ipset: bitmap:ip,mac: fix listing with timeout
The type when timeout support was enabled, could not list all elements,
just the first ones which could fit into one netlink message: it just
did not continue listing after the first message.

Reported-by: Yoann JUET <yoann.juet@univ-nantes.fr>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Tested-by: Yoann JUET <yoann.juet@univ-nantes.fr>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-18 23:40:41 +02:00
Eric Dumazet
4394542ca4 bonding: fix l23 and l34 load balancing in forwarding path
Since commit 6b923cb718 (bonding: support for IPv6 transmit hashing)
bonding doesn't properly hash traffic in forwarding setups.

Vitaly V. Bursov diagnosed that skb_network_header_len() returned 0 in
this case.

More generally, the transport header might not be in the skb head.

Use pskb_may_pull() & skb_header_pointer() to get it right, and use
proto_ports_offset() in bond_xmit_hash_policy_l34() to get support for
more protocols than TCP and UDP.

Reported-by: Vitaly V. Bursov <vitalyb@telenet.dn.ua>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Jay Vosburgh <fubar@us.ibm.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Cc: John Eaglesham <linux@8192.net>
Tested-by: Vitaly V. Bursov <vitalyb@telenet.dn.ua>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 15:07:29 -04:00
Ariel Elior
0c14e5ced2 bnx2x: Fix status blocks configuration
This fixes 2 issues regarding bnx2x's status blocks:

   1. ethtool -c caused corruption of status blocks in FW RAM.

   2. when using multi-CoS, the configuration of the timeout values of
      status blocks is incorrect, harming the coalescing of interrupts
      for such CoSs.

Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 15:03:26 -04:00
Dmitry Kravkov
d46f7c4df3 bnx2x: Prevent UNDI FW illegal host access
When loading after UNDI (e.g., Boot from SAN) the UNDI does not
gracefully yield its resources; The bnx2x driver handles that release
itself.

During the manipulation required to release those resources, it's possible
for the UNDI to try and write to memory regions which are no longer accessible,
causing the PCI bus to prevent further writes from the chip.

This would in turn cause DMAE timeouts later on in the driver, as the driver
will be unable to use the chip's DMA engines.

This patch prevents the chip from actually writing through the PCI bus
in said scenario, thus allowing the release without the unfortunate by-product.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 15:03:25 -04:00
John W. Linville
5a22483e5a Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem 2013-04-18 15:01:30 -04:00
David S. Miller
d5f2cffc49 Merge branch 'qlogic'
Shahed Shaikh says:

====================
This patch series contains bug fixes for -
* Loopback test failure while traffic is running.
* Tx timeout and subsequent firmware reset by removing check for
  '(adapter->netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)' from tx fast
  path, as per Eric's suggestion.
* Typo in logs.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 14:55:07 -04:00
Shahed Shaikh
7bc27a8cd4 qlcnic: Fix typo in logs
o Debug logs were not matching with code functionality.
o Changed dev_info to netdev_err

Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 14:55:00 -04:00
Sritej Velaga
3eead213fe qlcnic: fix TSO race condition
When driver receives a packet with gso size > 0 and when TSO is disabled,
it should be transmitted as a TSO packet to prevent Tx timeout and subsequent
firmware reset.

Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 14:54:59 -04:00
Jitendra Kalsaria
a4325ea242 qlcnic: Stop traffic before performing loopback test
Before conducting loopback test by sending packets, driver should stop transmit
queue and turn off carrier.

Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 14:54:59 -04:00
Greg Rose
026ac67741 ixgbe: Fix a bug in setting VF VLAN via PF
The PF driver does not check if the administrator has already set a VF
VLAN via the PF driver before setting the new VLAN.  This results in
the following scenario:

A) Administrator sets VF <n> to VLAN 100
B) Administrator sets VF <x> to VLAN 100
C) Administrator sets VF <n> to VLAN 200
D) The VF <n> driver continues to be able to receive traffic on VLAN
   100 because the VLVFB pool enable bit for that VF was left set
   instead of being cleared as it should be.

This fix ensures that the old VLAN filter for VF <n> is first removed
and the pool bit enable for VF <n> is cleared so that it no longer
receives traffic on VLAN 100.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 14:52:18 -04:00
Alexander Duyck
f9d40f6a99 igb: Revert support for build_skb in igb
This patch actually reverts:
igb: Support using build_skb in the case that jumbo frames are disabled

The reason for reverting this patch is that it can lead to data corruption.
The following flow was pointed out by Ben Hutchings:

1. skb is forwarded to another device
2. Packet headers are modified and it's put into a queue
3. Second packet is received into the other half of this page
4. Page cannot be reused, so is DMA-unmapped
5. The DMA mapping was non-coherent, so unmap copies or invalidates
cache

The headers added in step 2 get trashed in step 5.

Reported-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 14:52:18 -04:00
David S. Miller
0fecd75046 Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-merge
Included changes:
- fix MAC address check in case of multiple mesh interfaces

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 14:50:38 -04:00
Rob Herring
73053d973d ARM: highbank: fix cache flush ordering for cpu hotplug
The L1 data cache flush needs to be after highbank_set_cpu_jump call which
pollutes the cache with the l2x0_lock. This causes other cores to deadlock
waiting for the l2x0_lock. Moving the flush of the entire data cache after
highbank_set_cpu_jump fixes the problem. Use flush_cache_louis instead of
flush_cache_all are that is sufficient to flush only the L1 data cache.
flush_cache_louis did not exist when highbank_cpu_die was originally
written.

With PL310 errata 769419 enabled, a wmb is inserted into idle which takes
the l2x0_lock. This makes the problem much more easily hit and causes
reset to hang.

Reported-by: Paolo Pisati <p.pisati@gmail.com>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-04-18 09:37:46 -07:00
Linus Torvalds
0a82a8d132 Revert "block: add missing block_bio_complete() tracepoint"
This reverts commit 3a366e614d.

Wanlong Gao reports that it causes a kernel panic on his machine several
minutes after boot. Reverting it removes the panic.

Jens says:
 "It's not quite clear why that is yet, so I think we should just revert
  the commit for 3.9 final (which I'm assuming is pretty close).

  The wifi is crap at the LSF hotel, so sending this email instead of
  queueing up a revert and pull request."

Reported-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Requested-by: Jens Axboe <axboe@kernel.dk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-18 09:00:26 -07:00
K. Y. Srinivasan
7eff7ded02 x86, hyperv: Handle Xen emulation of Hyper-V more gracefully
Install the Hyper-V specific interrupt handler only when needed. This would
permit us to get rid of the Xen check. Note that when the vmbus drivers invokes
the call to register its handler, we are sure to be running on Hyper-V.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Link: http://lkml.kernel.org/r/1366299886-6399-1-git-send-email-kys@microsoft.com
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-04-18 08:59:20 -07:00
Masami Hiramatsu
5c51543b0a kprobes: Fix a double lock bug of kprobe_mutex
Fix a double locking bug caused when debug.kprobe-optimization=0.
While the proc_kprobes_optimization_handler locks kprobe_mutex,
wait_for_kprobe_optimizer locks it again and that causes a double lock.
To fix the bug, this introduces different mutex for protecting
sysctl parameter and locks it in proc_kprobes_optimization_handler.
Of course, since we need to lock kprobe_mutex when touching kprobes
resources, that is done in *optimize_all_kprobes().

This bug was introduced by commit ad72b3bea7 ("kprobes: fix
wait_for_kprobe_optimizer()")

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-18 08:58:38 -07:00
Ludovic Desroches
d202f05158 dmaengine: at_hdmac: fix race condition in atc_advance_work()
The BUG_ON() directive is triggered probably due to a latency
modification following inclusion of commit c10d73671a ("softirq:
reduce latencies").  This condition has not been met before 3.9-rc1 and
doesn't trigger without this patch.

We now make sure that DMA channel is idle before calling
atc_complete_all() which makes the BUG_ON() "protection" useless.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-18 08:54:22 -07:00
David S. Miller
ea2f2fa143 Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jesse/openvswitch
Jesse Gross says:

====================
Two small bug fixes for net/3.9 including the issue previously
discussed where allocation of netlink notifications can fail after
changes have been committed.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-18 00:20:57 -04:00
Linus Torvalds
ebe8054433 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull idle patches from Len Brown:
 "A pair of small patches for 3.9-rc7.

  This CPU-id should have been included in the ones that we updated
  earlier in 3.9.  This pair of patches will allow this flavor of
  Haswell to behave like the other flavors."

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: additional Haswell CPU-id
  intel_idle: additional Haswell CPU-id
2013-04-17 16:12:43 -07:00
Linus Torvalds
1ce6ec91a8 Merge branch 'akpm' (fixes from Andrew)
Pull misc fixes from Andrew Morton:
 "Ten fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  kernel/signal.c: stop info leak via the tkill and the tgkill syscalls
  mm/vmscan: fix error return in kswapd_run()
  hfsplus: fix potential overflow in hfsplus_file_truncate()
  avr32: fix build error in atstk1006_defconfig
  hugetlbfs: add swap entry check in follow_hugetlb_page()
  fs/binfmt_elf.c: fix hugetlb memory check in vma_dump_size()
  hugetlbfs: stop setting VM_DONTDUMP in initializing vma(VM_HUGETLB)
  checkpatch: fix stringification macro defect
  drivers/video/mmp/core.c: fix use-after-free bug
  thinkpad-acpi: kill hotkey_thread_mutex
2013-04-17 16:11:09 -07:00
Emese Revfy
b9e146d8eb kernel/signal.c: stop info leak via the tkill and the tgkill syscalls
This fixes a kernel memory contents leak via the tkill and tgkill syscalls
for compat processes.

This is visible in the siginfo_t->_sifields._rt.si_sigval.sival_ptr field
when handling signals delivered from tkill.

The place of the infoleak:

int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from)
{
        ...
        put_user_ex(ptr_to_compat(from->si_ptr), &to->si_ptr);
        ...
}

Signed-off-by: Emese Revfy <re.emese@gmail.com>
Reviewed-by: PaX Team <pageexec@freemail.hu>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Serge Hallyn <serge.hallyn@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-17 16:10:45 -07:00
Xishi Qiu
d72515b85a mm/vmscan: fix error return in kswapd_run()
Fix the error return value in kswapd_run().  The bug was introduced by
commit d5dc0ad928 ("mm/vmscan: fix error number for failed kthread").

Signed-off-by: Xishi Qiu <qiuxishi@huawei.com>
Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Reported-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-17 16:10:45 -07:00
Vyacheslav Dubeyko
12f267a20a hfsplus: fix potential overflow in hfsplus_file_truncate()
Change a u32 to loff_t hfsplus_file_truncate().

Signed-off-by: Vyacheslav Dubeyko <slava@dubeyko.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Hin-Tak Leung <htl10@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-17 16:10:45 -07:00
Josh Wu
472d326677 avr32: fix build error in atstk1006_defconfig
fixed the following compile error when use avr32 atstk1006_defconfig:

  drivers/mtd/nand/atmel_nand.c: In function 'pmecc_err_location':
  drivers/mtd/nand/atmel_nand.c:639: error: implicit declaration of function 'writel_relaxed'

which was introduced by commit 1c7b874d33 ("mtd: at91: atmel_nand: add
Programmable Multibit ECC controller support").  The PMECC for nand
flash code uses writel_relaxed().  But in avr32, there is no macro
"writel_relaxed" defined.

This patch add writex_relaxed macro definitions.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Havard Skinnemoen <havard@skinnemoen.net>
Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: David Woodhouse <David.Woodhouse@intel.com>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-17 16:10:44 -07:00
Naoya Horiguchi
9cc3a5bd40 hugetlbfs: add swap entry check in follow_hugetlb_page()
With applying the previous patch "hugetlbfs: stop setting VM_DONTDUMP in
initializing vma(VM_HUGETLB)" to reenable hugepage coredump, if a memory
error happens on a hugepage and the affected processes try to access the
error hugepage, we hit VM_BUG_ON(atomic_read(&page->_count) <= 0) in
get_page().

The reason for this bug is that coredump-related code doesn't recognise
"hugepage hwpoison entry" with which a pmd entry is replaced when a memory
error occurs on a hugepage.

In other words, physical address information is stored in different bit
layout between hugepage hwpoison entry and pmd entry, so
follow_hugetlb_page() which is called in get_dump_page() returns a wrong
page from a given address.

The expected behavior is like this:

  absent   is_swap_pte   FOLL_DUMP   Expected behavior
  -------------------------------------------------------------------
   true     false         false       hugetlb_fault
   false    true          false       hugetlb_fault
   false    false         false       return page
   true     false         true        skip page (to avoid allocation)
   false    true          true        hugetlb_fault
   false    false         true        return page

With this patch, we can call hugetlb_fault() and take proper actions (we
wait for migration entries, fail with VM_FAULT_HWPOISON_LARGE for
hwpoisoned entries,) and as the result we can dump all hugepages except
for hwpoisoned ones.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>	[2.6.34+?]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-17 16:10:44 -07:00
Naoya Horiguchi
23d9e48213 fs/binfmt_elf.c: fix hugetlb memory check in vma_dump_size()
Documentation/filesystems/proc.txt says about coredump_filter bitmask,

  Note bit 0-4 doesn't effect any hugetlb memory. hugetlb memory are only
  effected by bit 5-6.

However current code can go into the subsequent flag checks of bit 0-4
for vma(VM_HUGETLB). So this patch inserts 'return' and makes it work
as written in the document.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>	[3.7+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-17 16:10:44 -07:00
Naoya Horiguchi
a2fce91430 hugetlbfs: stop setting VM_DONTDUMP in initializing vma(VM_HUGETLB)
Currently we fail to include any data on hugepages into coredump,
because VM_DONTDUMP is set on hugetlbfs's vma.  This behavior was
recently introduced by commit 314e51b985 ("mm: kill vma flag
VM_RESERVED and mm->reserved_vm counter").

This looks to me a serious regression, so let's fix it.

Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: Michal Hocko <mhocko@suse.cz>
Reviewed-by: Rik van Riel <riel@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org>	[3.7+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-17 16:10:44 -07:00
Joe Perches
e942e2c3f7 checkpatch: fix stringification macro defect
Fix checkpatch misreporting defect with stringification macros

ERROR: Macros with complex values should be enclosed in parenthesis
  #27: FILE: arch/arm/include/asm/kgdb.h:41:
  +#define ___to_string(X) #X

Signed-off-by: Joe Perches <joe@perches.com>
Reported-by: Vincent Stehlé <v-stehle@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-17 16:10:44 -07:00
Andrei Epure
d875cf0839 drivers/video/mmp/core.c: fix use-after-free bug
Found with coccinelle.

Signed-off-by: Andrei Epure <epure.andrei@gmail.com>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-17 16:10:44 -07:00
Oleg Nesterov
355f1ecbcc thinkpad-acpi: kill hotkey_thread_mutex
hotkey_kthread() does try_to_freeze() under hotkey_thread_mutex.

We can simply kill this mutex, hotkey_poll_stop_sync() does not need to
serialize with hotkey_kthread().  When kthread_stop() returns the thread
is already dead, it called do_exit()->complete_vfork_done().

Reported-by: Artem Savkov <artem.savkov@gmail.com>
Reported-by: Maciej Rutecki <maciej.rutecki@gmail.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Reviewed-by: Mandeep Singh Baines <msb@chromium.org>
Cc: Aaron Lu <aaron.lu@intel.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-17 16:10:44 -07:00
Antonio Quartulli
fe8a93b951 batman-adv: make is_my_mac() check for the current mesh only
On a multi-mesh node (a node running more than one batman-adv
virtual interface) batadv_is_my_mac() has to check MAC
addresses of hard interfaces belonging to the current mesh
only.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2013-04-17 22:31:22 +02:00
Linus Torvalds
96d8683483 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client
Pull Ceph fix from Sage Weil:
 "It's a simple fix for a hard to hit race, but low-risk and clearly
  correct"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  rbd: do a safe list traversal in rbd_img_request_submit()
2013-04-17 12:52:02 -07:00
Marc Zyngier
15bbc1b28f ARM: KVM: fix unbalanced get_cpu() in access_dcsw
In the very unlikely event where a guest would be foolish enough to
*read* from a write-only cache maintainance register, we end up
with preemption disabled, due to a misplaced get_cpu().

Just move the "is_write" test outside of the critical section.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-17 12:51:32 -07:00
Yinghai Lu
157752d84f kexec: use Crash kernel for Crash kernel low
We can extend kexec-tools to support multiple "Crash kernel" in /proc/iomem
instead.

So we can use "Crash kernel" instead of "Crash kernel low" in /proc/iomem.

Suggested-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1366089828-19692-3-git-send-email-yinghai@kernel.org
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-04-17 12:35:34 -07:00
Yinghai Lu
adbc742bf7 x86, kdump: Change crashkernel_high/low= to crashkernel=,high/low
Per hpa, use crashkernel=X,high crashkernel=Y,low instead of
crashkernel_hign=X crashkernel_low=Y. As that could be extensible.

-v2: according to Vivek, change delimiter to ;
-v3: let hign and low only handle simple form and it conforms to
	description in kernel-parameters.txt
     still keep crashkernel=X override any crashkernel=X,high
        crashkernel=Y,low
-v4: update get_last_crashkernel returning and add more strict
     checking in parse_crashkernel_simple() found by HATAYAMA.
-v5: Change delimiter back to , according to HPA.
     also separate parse_suffix from parse_simper according to vivek.
	so we can avoid @pos in that path.
-v6: Tight the checking about crashkernel=X,highblahblah,high
     found by HTYAYAMA.

Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1366089828-19692-5-git-send-email-yinghai@kernel.org
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-04-17 12:35:33 -07:00
Yinghai Lu
55a20ee780 x86, kdump: Retore crashkernel= to allocate under 896M
Vivek found old kexec-tools does not work new kernel anymore.

So change back crashkernel= back to old behavoir, and add crashkernel_high=
to let user decide if buffer could be above 4G, and also new kexec-tools will
be needed.

-v2: let crashkernel=X override crashkernel_high=
    update description about _high will be ignored by crashkernel=X
-v3: update description about kernel-parameters.txt according to Vivek.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1366089828-19692-4-git-send-email-yinghai@kernel.org
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-04-17 12:35:33 -07:00
Yinghai Lu
c729de8fce x86, kdump: Set crashkernel_low automatically
Chao said that kdump does does work well on his system on 3.8
without extra parameter, even iommu does not work with kdump.
And now have to append crashkernel_low=Y in first kernel to make
kdump work.

We have now modified crashkernel=X to allocate memory beyong 4G (if
available) and do not allocate low range for crashkernel if the user
does not specify that with crashkernel_low=Y.  This causes regression
if iommu is not enabled.  Without iommu, swiotlb needs to be setup in
first 4G and there is no low memory available to second kernel.

Set crashkernel_low automatically if the user does not specify that.

For system that does support IOMMU with kdump properly, user could
specify crashkernel_low=0 to save that 72M low ram.

-v3: add swiotlb_size() according to Konrad.
-v4: add comments what 8M is for according to hpa.
     also update more crashkernel_low= in kernel-parameters.txt
-v5: update changelog according to Vivek.
-v6: Change description about swiotlb referring according to HATAYAMA.

Reported-by: WANG Chao <chaowang@redhat.com>
Tested-by: WANG Chao <chaowang@redhat.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/1366089828-19692-2-git-send-email-yinghai@kernel.org
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-04-17 12:35:32 -07:00
Alex Elder
46faeed4a6 rbd: do a safe list traversal in rbd_img_request_submit()
It's possible that the reference to the object request dropped
inside the loop in rbd_img_request_submit() will be the last
one, in which case the content of the object pointer can't be
trusted.

Use a safe form of the object request list traversal to avoid
problems.

This resolves:
    http://tracker.ceph.com/issues/4705

Signed-off-by: Alex Elder <elder@inktank.com>
Reviewed-by: Josh Durgin <josh.durgin@inktank.com>
2013-04-17 11:39:09 -07:00
Will Deacon
cb2d8b342a ARM: 7698/1: perf: fix group validation when using enable_on_exec
Events may be created with attr->disabled == 1 and attr->enable_on_exec
== 1, which confuses the group validation code because events with the
PERF_EVENT_STATE_OFF are not considered candidates for scheduling, which
may lead to failure at group scheduling time.

This patch fixes the validation check for ARM, so that events in the
OFF state are still considered when enable_on_exec is true.

Cc: stable@vger.kernel.org
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Reported-by: Sudeep KarkadaNagesha <Sudeep.KarkadaNagesha@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-04-17 16:54:07 +01:00
Bastian Hecht
50acff3c1f ARM: 7697/1: hw_breakpoint: do not use __cpuinitdata for dbg_cpu_pm_nb
We must not declare dbg_cpu_pm_nb as __cpuinitdata as we need it after
system initialization for Suspend and CPUIdle.

This was done in commit 9a6eb310ea ("ARM: hw_breakpoint: Debug powerdown
support for self-hosted debug").

Cc: stable@vger.kernel.org
Cc: Dietmar Eggemann <Dietmar.Eggemann@arm.com>
Signed-off-by: Bastian Hecht <hechtb+renesas@gmail.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-04-17 16:54:06 +01:00
Illia Ragozin
cd272d1ea7 ARM: 7696/1: Fix kexec by setting outer_cache.inv_all for Feroceon
On Feroceon the L2 cache becomes non-coherent with the CPU
when the L1 caches are disabled. Thus the L2 needs to be invalidated
after both L1 caches are disabled.

On kexec before the starting the code for relocation the kernel,
the L1 caches are disabled in cpu_froc_fin (cpu_v7_proc_fin for Feroceon),
but after L2 cache is never invalidated, because inv_all is not set
in cache-feroceon-l2.c.
So kernel relocation and decompression may has (and usually has) errors.
Setting the function enables L2 invalidation and fixes the issue.

Cc: <stable@vger.kernel.org>
Signed-off-by: Illia Ragozin <illia.ragozin@grapecom.com>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-04-17 16:53:27 +01:00
Joonsoo Kim
de40614e92 ARM: 7694/1: ARM, TCM: initialize TCM in paging_init(), instead of setup_arch()
tcm_init() call iotable_init() and it use early_alloc variants which
do memblock allocation. Directly using memblock allocation after
initializing bootmem should not permitted, because bootmem can't know
where are additinally reserved.
So move tcm_init() to a safe place before initalizing bootmem.

(On the U300)

Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-04-17 16:53:24 +01:00
Aaro Koskinen
f5d6a1441a ARM: 7692/1: iop3xx: move IOP3XX_PERIPHERAL_VIRT_BASE
Currently IOP3XX_PERIPHERAL_VIRT_BASE conflicts with PCI_IO_VIRT_BASE:

					address         size
	PCI_IO_VIRT_BASE                0xfee00000      0x200000
	IOP3XX_PERIPHERAL_VIRT_BASE     0xfeffe000      0x2000

Fix by moving IOP3XX_PERIPHERAL_VIRT_BASE below PCI_IO_VIRT_BASE.

The patch fixes the following kernel panic with 3.9-rc1 on iop3xx boards:

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.9.0-rc1-iop32x (aaro@blackmetal) (gcc version 4.7.2 (GCC) ) #20 PREEMPT Tue Mar 5 16:44:36 EET 2013
[    0.000000] bootconsole [earlycon0] enabled
[    0.000000] ------------[ cut here ]------------
[    0.000000] kernel BUG at mm/vmalloc.c:1145!
[    0.000000] Internal error: Oops - BUG: 0 [#1] PREEMPT ARM
[    0.000000] Modules linked in:
[    0.000000] CPU: 0    Not tainted  (3.9.0-rc1-iop32x #20)
[    0.000000] PC is at vm_area_add_early+0x4c/0x88
[    0.000000] LR is at add_static_vm_early+0x14/0x68
[    0.000000] pc : [<c03e74a8>]    lr : [<c03e1c40>]    psr: 800000d3
[    0.000000] sp : c03ffee4  ip : dfffdf88  fp : c03ffef4
[    0.000000] r10: 00000002  r9 : 000000cf  r8 : 00000653
[    0.000000] r7 : c040eca8  r6 : c03e2408  r5 : dfffdf60  r4 : 00200000
[    0.000000] r3 : dfffdfd8  r2 : feffe000  r1 : ff000000  r0 : dfffdf60
[    0.000000] Flags: Nzcv  IRQs off  FIQs off  Mode SVC_32  ISA ARM  Segment kernel
[    0.000000] Control: 0000397f  Table: a0004000  DAC: 00000017
[    0.000000] Process swapper (pid: 0, stack limit = 0xc03fe1b8)
[    0.000000] Stack: (0xc03ffee4 to 0xc0400000)
[    0.000000] fee0:          00200000 c03fff0c c03ffef8 c03e1c40 c03e7468 00200000 fee00000
[    0.000000] ff00: c03fff2c c03fff10 c03e23e4 c03e1c38 feffe000 c0408ee4 ff000000 c0408f04
[    0.000000] ff20: c03fff3c c03fff30 c03e2434 c03e23b4 c03fff84 c03fff40 c03e2c94 c03e2414
[    0.000000] ff40: c03f8878 c03f6410 ffff0000 000bffff 00001000 00000008 c03fff84 c03f6410
[    0.000000] ff60: c04227e8 c03fffd4 a0008000 c03f8878 69052e30 c02f96eb c03fffbc c03fff88
[    0.000000] ff80: c03e044c c03e268c 00000000 0000397f c0385130 00000001 ffffffff c03f8874
[    0.000000] ffa0: dfffffff a0004000 69052e30 a03f61a0 c03ffff4 c03fffc0 c03dd5cc c03e0184
[    0.000000] ffc0: 00000000 00000000 00000000 00000000 00000000 c03f8878 0000397d c040601c
[    0.000000] ffe0: c03f8874 c0408674 00000000 c03ffff8 a0008040 c03dd558 00000000 00000000
[    0.000000] Backtrace:
[    0.000000] [<c03e745c>] (vm_area_add_early+0x0/0x88) from [<c03e1c40>] (add_static_vm_early+0x14/0x68)

Tested-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-04-17 16:53:23 +01:00
Linus Torvalds
fca83168aa Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:

 1) Fix erroneous netfilter drop of SIP packets generated by some Cisco
    phones, from Patrick McHardy.

 2) Fix netfilter IPSET refcounting in list_set_add(), from Jozsef
    Kadlecsik.

 3) Fix TCP syncookies route lookup key, we don't use the same values we
    would use for the usual SYN receive processing, from Dmitry Popov.

 4) Fix NULL deref in bond_slave_netdev_event(), from Nikolay
    Aleksandrov.

 5) When bonding enslave fails, we can forget to clear the IFF_BONDING
    bit, fix also from Nikolay Aleksandrov.

 6) skb->csum_start is 16-bits, which is almost always just fine.  But
    if we reallocate the headroom of an SKB this can push the
    skb->csum_start value outside of it's valid range.  This can easily
    happen when collapsing multiple SKBs from the retransmit queue
    together.

    Fix from Thomas Graf.

 7) Fix NULL deref in be2net driver due to missing check of
    __vlan_put_tag() return value, from Ivan Vecera.

 8) tun_set_iff() returns zero instead of error code on failure, fix
    from Wei Yongjun.

 9) Like GARP, 802 MRP needs to hold the app->lock when adding MAD
    events and queueing PDUs.  Fix from David Ward.

10) Build fix, MVMDIO needs PHYLIB, from Thomas Petazzoni..

11) Fix mac80211 static with ipv6 modular build, from Cong Wang.

12) If userland specifies a path cost explicitly, do not override it
    when the carrier state changes.  From Stephen Hemminger.

13) mvnets calculates the TX queue to use incorrectly resulting in
    garbage pointer derefs and crashes, fix from Willy Tarreau.

14) cdc_mbim does erroneous sizeof(ETH_HLEN).  Fix from Bjorn Mork.

15) IP fragmentation can leak a refcount-less route out from an RCU
    protected section.  This results in crashes and all sorts of hard to
    diagnose behavior.  Fix from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (24 commits)
  qlcnic: fix beaconing test for 82xx adapter
  net: drop dst before queueing fragments
  net: fec: fix regression in link change accounting
  net: cdc_mbim: remove bogus sizeof()
  drivers: net: ethernet: cpsw: get slave VLAN id from slave node instead of cpsw node
  net: mvneta: fix improper tx queue usage in mvneta_tx()
  esp4: fix error return code in esp_output()
  bridge: make user modified path cost sticky
  ipv6: statically link register_inet6addr_notifier()
  net: mvmdio: add select PHYLIB
  net/802/mrp: fix possible race condition when calling mrp_pdu_queue()
  tuntap: fix error return code in tun_set_iff()
  be2net: take care of __vlan_put_tag return value
  can: sja1000: fix handling on dt properties on little endian systems
  can: mcp251x: add missing IRQF_ONESHOT to request_threaded_irq
  netfilter: nf_nat: fix race when unloading protocol modules
  tcp: Reallocate headroom if it would overflow csum_start
  stmmac: prevent interrupt loop with MMC RX IPC Counter
  bonding: IFF_BONDING is not stripped on enslave failure
  bonding: fix netdev event NULL pointer dereference
  ...
2013-04-17 08:50:59 -07:00
Linus Torvalds
4f2e29031e s390: move dummy io_remap_pfn_range() to asm/pgtable.h
Commit b4cbb197c7 ("vm: add vm_iomap_memory() helper function") added
a helper function wrapper around io_remap_pfn_range(), and every other
architecture defined it in <asm/pgtable.h>.

The s390 choice of <asm/io.h> may make sense, but is not very convenient
for this case, and gratuitous differences like that cause unexpected errors like this:

   mm/memory.c: In function 'vm_iomap_memory':
   mm/memory.c:2439:2: error: implicit declaration of function 'io_remap_pfn_range' [-Werror=implicit-function-declaration]

Glory be the kbuild test robot who noticed this, bisected it, and
reported it to the guilty parties (ie me).

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-17 08:46:19 -07:00
Richard Weinberger
8c58bf3eec x86,efi: Implement efi_no_storage_paranoia parameter
Using this parameter one can disable the storage_size/2 check if
he is really sure that the UEFI does sane gc and fulfills the spec.

This parameter is useful if a devices uses more than 50% of the
storage by default.
The Intel DQSW67 desktop board is such a sucker for exmaple.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-04-17 15:13:38 +01:00
Miklos Szeredi
4c82456eeb fuse: fix type definitions in uapi header
Commit 7e98d53086 (Synchronize fuse header with
one used in library) added #ifdef __linux__ around defines if it is not set.
The kernel build is self-contained and can be built on non-Linux toolchains.
After the mentioned commit builds on non-Linux toolchains will try to include
stdint.h and fail due to -nostdinc, and then fail with a bunch of undefined type
errors.

Fix by checking for __KERNEL__ instead of __linux__ and using the standard int
types instead of the linux specific ones.

Reported-by: Arve Hjønnevåg <arve@android.com>
Reported-by: Colin Cross <ccross@android.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2013-04-17 12:30:40 +02:00
Russell King
4d855021dd Merge branch 'for-rmk/740t' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux into fixes 2013-04-17 10:35:23 +01:00
Himanshu Madhani
361cd29cf9 qlcnic: fix beaconing test for 82xx adapter
o Commit 319ecf121e
  ("qlcnic: 83xx sysfs routines") introduced regression
  for beaconing test while refactoring 82xx code. This patch is to
  revert code to fix beaconing test for 82xx adapter.

Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-17 01:15:29 -04:00
Eric Dumazet
97599dc792 net: drop dst before queueing fragments
Commit 4a94445c9a (net: Use ip_route_input_noref() in input path)
added a bug in IP defragmentation handling, as non refcounted
dst could escape an RCU protected section.

Commit 64f3b9e203 (net: ip_expire() must revalidate route) fixed
the case of timeouts, but not the general problem.

Tom Parkin noticed crashes in UDP stack and provided a patch,
but further analysis permitted us to pinpoint the root cause.

Before queueing a packet into a frag list, we must drop its dst,
as this dst has limited lifetime (RCU protected)

When/if a packet is finally reassembled, we use the dst of the very
last skb, still protected by RCU and valid, as the dst of the
reassembled packet.

Use same logic in IPv6, as there is no need to hold dst references.

Reported-by: Tom Parkin <tparkin@katalix.com>
Tested-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-17 01:15:29 -04:00
Linus Torvalds
542a672467 Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM fix from Russell King:
 "A build fix for an incomplete change to the ARM cpu suspend code"

* branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: Do 15e0d9e37c (ARM: pm: let platforms select cpu_suspend support) properly
2013-04-16 19:49:03 -07:00
Linus Torvalds
4be41343a2 Merge git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Marcelo Tosatti:
 "PPC and ARM KVM fixes"

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  ARM: KVM: fix L_PTE_S2_RDWR to actually be Read/Write
  ARM: KVM: fix KVM_CAP_ARM_SET_DEVICE_ADDR reporting
  kvm/ppc/e500: eliminate tlb_refs
  kvm/ppc/e500: g2h_tlb1_map: clear old bit before setting new bit
  kvm/ppc/e500: h2g_tlb1_rmap: esel 0 is valid
  kvm/powerpc/e500mc: fix tlb invalidation on cpu migration
2013-04-16 19:46:14 -07:00
Linus Torvalds
de0024b60c Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sfr/next-fixes
Pull powerpc fixes from Stephen Rothwell:
 "Three regresions in the PowerPC code.  One from v3.7 the others from
  this merge window."

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sfr/next-fixes:
  powerpc: add a missing label in resume_kernel
  powerpc: Fix audit crash due to save/restore PPR changes
  powerpc: fix compiling CONFIG_PPC_TRANSACTIONAL_MEM when CONFIG_ALTIVEC=n
2013-04-16 19:45:15 -07:00
Linus Torvalds
c208278c5c Merge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild fix from Michal Marek:
 "Fix for a missing dependency when generating scripts/mod/devicetable-offsets.h.
  This dependency got introduced in v3.9-rc1."

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  kbuild: generate generic headers before recursing into scripts
2013-04-16 19:44:10 -07:00
Linus Torvalds
8665ffc921 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
 "Two small fixups to the Wacom driver"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: wacom - correct reported resolution for Intuos4 Wireless
  Input: wacom - fix "can not retrieve extra class descriptor" for 24HDT
2013-04-16 19:43:30 -07:00
Marcelo Tosatti
23125c40e0 Merge branch 'kvm-arm-fixes-3.9' of git://github.com/columbia/linux-kvm-arm
* 'kvm-arm-fixes-3.9' of git://github.com/columbia/linux-kvm-arm:
  ARM: KVM: fix L_PTE_S2_RDWR to actually be Read/Write
  ARM: KVM: fix KVM_CAP_ARM_SET_DEVICE_ADDR reporting

Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2013-04-16 20:49:47 -03:00
Linus Torvalds
b4cbb197c7 vm: add vm_iomap_memory() helper function
Various drivers end up replicating the code to mmap() their memory
buffers into user space, and our core memory remapping function may be
very flexible but it is unnecessarily complicated for the common cases
to use.

Our internal VM uses pfn's ("page frame numbers") which simplifies
things for the VM, and allows us to pass physical addresses around in a
denser and more efficient format than passing a "phys_addr_t" around,
and having to shift it up and down by the page size.  But it just means
that drivers end up doing that shifting instead at the interface level.

It also means that drivers end up mucking around with internal VM things
like the vma details (vm_pgoff, vm_start/end) way more than they really
need to.

So this just exports a function to map a certain physical memory range
into user space (using a phys_addr_t based interface that is much more
natural for a driver) and hides all the complexity from the driver.
Some drivers will still end up tweaking the vm_page_prot details for
things like prefetching or cacheability etc, but that's actually
relevant to the driver, rather than caring about what the page offset of
the mapping is into the particular IO memory region.

Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-16 16:45:45 -07:00
Marc Zyngier
865499ea90 ARM: KVM: fix L_PTE_S2_RDWR to actually be Read/Write
Looks like our L_PTE_S2_RDWR definition is slightly wrong,
and is actually write only (see ARM ARM Table B3-9, Stage 2 control
of access permissions). Didn't make a difference for normal pages,
as we OR the flags together, but I'm still wondering how it worked
for Stage-2 mapped devices, such as the GIC.

Brown paper bag time, again.

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-16 16:21:25 -07:00
Marc Zyngier
ca46e10fb2 ARM: KVM: fix KVM_CAP_ARM_SET_DEVICE_ADDR reporting
Commit 3401d54696 (KVM: ARM: Introduce KVM_ARM_SET_DEVICE_ADDR
ioctl) added support for the KVM_CAP_ARM_SET_DEVICE_ADDR capability,
but failed to add a break in the relevant case statement, returning
the number of CPUs instead.

Luckilly enough, the CONFIG_NR_CPUS=0 patch hasn't been merged yet
(https://lkml.org/lkml/diff/2012/3/31/131/1), so the bug wasn't
noticed.

Just give it a break!

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <cdall@cs.columbia.edu>
2013-04-16 16:21:24 -07:00
Lucas Stach
8d7ed0f051 net: fec: fix regression in link change accounting
A link-down isn't properly saved in the FEC state, so we wouldn't restart the
FEC after a repeated link-up.

Regression was introduced with commit
d97e7497 "net: fec: restart the FEC when PHY speed changes"

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-16 16:47:43 -04:00
Bjørn Mork
32b161aa88 net: cdc_mbim: remove bogus sizeof()
The intention was to test against the constant, not the size of
the constant.

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-16 16:44:36 -04:00
Sergey Vlasov
3668011d4a efi: Export efi_query_variable_store() for efivars.ko
Fixes build with CONFIG_EFI_VARS=m which was broken after the commit
"x86, efivars: firmware bug workarounds should be in platform code".

Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-04-16 17:34:07 +01:00
Sergey Vlasov
f6ce500262 x86/Kconfig: Make EFI select UCS2_STRING
The commit "efi: Distinguish between "remaining space" and actually used
space" added usage of ucs2_*() functions to arch/x86/platform/efi/efi.c,
but the only thing which selected UCS2_STRING was EFI_VARS, which is
technically optional and can be built as a module.

Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-04-16 17:31:08 +01:00
Stephane Eranian
f1923820c4 perf/x86: Fix offcore_rsp valid mask for SNB/IVB
The valid mask for both offcore_response_0 and
offcore_response_1 was wrong for SNB/SNB-EP,
IVB/IVB-EP. It was possible to write to
reserved bit and cause a GP fault crashing
the kernel.

This patch fixes the problem by correctly marking the
reserved bits in the valid mask for all the processors
mentioned above.

A distinction between desktop and server parts is introduced
because bits 24-30 are only available on the server parts.

This version of the  patch is just a rebase to perf/urgent tree
and should apply to older kernels as well.

Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: jolsa@redhat.com
Cc: gregkh@linuxfoundation.org
Cc: security@kernel.org
Cc: ak@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-16 15:02:06 +02:00
Matthew Garrett
31ff2f20d9 efi: Distinguish between "remaining space" and actually used space
EFI implementations distinguish between space that is actively used by a
variable and space that merely hasn't been garbage collected yet. Space
that hasn't yet been garbage collected isn't available for use and so isn't
counted in the remaining_space field returned by QueryVariableInfo().

Combined with commit 68d9298 this can cause problems. Some implementations
don't garbage collect until the remaining space is smaller than the maximum
variable size, and as a result check_var_size() will always fail once more
than 50% of the variable store has been used even if most of that space is
marked as available for garbage collection. The user is unable to create
new variables, and deleting variables doesn't increase the remaining space.

The problem that 68d9298 was attempting to avoid was one where certain
platforms fail if the actively used space is greater than 50% of the
available storage space. We should be able to calculate that by simply
summing the size of each available variable and subtracting that from
the total storage space. With luck this will fix the problem described in
https://bugzilla.kernel.org/show_bug.cgi?id=55471 without permitting
damage to occur to the machines 68d9298 was attempting to fix.

Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-04-15 21:33:05 +01:00
Matthew Garrett
cc5a080c5d efi: Pass boot services variable info to runtime code
EFI variables can be flagged as being accessible only within boot services.
This makes it awkward for us to figure out how much space they use at
runtime. In theory we could figure this out by simply comparing the results
from QueryVariableInfo() to the space used by all of our variables, but
that fails if the platform doesn't garbage collect on every boot. Thankfully,
calling QueryVariableInfo() while still inside boot services gives a more
reliable answer. This patch passes that information from the EFI boot stub
up to the efi platform code.

Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-04-15 21:31:09 +01:00
Matthew Garrett
0635eb8a54 Move utf16 functions to kernel core and rename
We want to be able to use the utf16 functions that are currently present
in the EFI variables code in platform-specific code as well. Move them to
the kernel core, and in the process rename them to accurately describe what
they do - they don't handle UTF16, only UCS2.

Signed-off-by: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-04-15 21:23:03 +01:00
Mugunthan V N
91c4166c1a drivers: net: ethernet: cpsw: get slave VLAN id from slave node instead of cpsw node
Dual EMAC slave VLAN id must be got from slave node instead of cpsw node as
VLAN id for each slave will be different.

Reported-by: Mark Jackson <mpfj-list@mimc.co.uk>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-15 14:14:40 -04:00
Willy Tarreau
ee40a116eb net: mvneta: fix improper tx queue usage in mvneta_tx()
mvneta_tx() was using a static tx queue number causing crashes as
soon as a little bit of traffic was sent via the interface, because
it is normally expected that the same queue should be used as in
dev_queue_xmit().

As suggested by Ben Hutchings, let's use skb_get_queue_mapping() to
get the proper Tx queue number, and use alloc_etherdev_mqs() instead
of alloc_etherdev_mq() to create the queues.

Both my Mirabox and my OpenBlocks AX3 used to crash without this patch
and don't anymore with it. The issue appeared in 3.8 but became more
visible after the fix allowing GSO to be enabled.

Original work was done by Dmitri Epshtein and Thomas Petazzoni. I
just adapted it to take care of Ben's comments.

Signed-off-by: Willy Tarreau <w@1wt.eu>
Cc: Dmitri Epshtein <dima@marvell.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gregory CLEMENT <gregory.clement@free-electrons.com>
Cc: Ben Hutchings <bhutchings@solarflare.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-15 14:08:13 -04:00
Wei Yongjun
06848c10f7 esp4: fix error return code in esp_output()
Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-15 14:05:34 -04:00
stephen hemminger
8f3359bdc8 bridge: make user modified path cost sticky
Keep a STP port path cost value if it was set by a user.
Don't replace it with the link-speed based path cost
whenever the link goes down and comes back up.

Reported-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-15 14:03:44 -04:00
Jason Gerecke
202dec868a Input: wacom - correct reported resolution for Intuos4 Wireless
Reported-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Tested-by: Przemo Firszt <przemo@firszt.eu>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-15 09:12:19 -07:00
Linus Torvalds
bb33db7a07 Merge branches 'timers-urgent-for-linus', 'irq-urgent-for-linus' and 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull {timer,irq,core} fixes from Thomas Gleixner:

 - timer: bug fix for a cpu hotplug race.

 - irq: single bugfix for a wrong return value, which prevents the
   calling function to invoke the software fallback.

 - core: bugfix which plugs two race confitions which can cause hotplug
   per cpu threads to end up on the wrong cpu.

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  hrtimer: Don't reinitialize a cpu_base lock on CPU_UP

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip: gic: fix irq_trigger return

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  kthread: Prevent unpark race which puts threads on the wrong cpu
2013-04-15 07:03:01 -07:00
Hans Verkuil
c95789ecd5 [media] cx25821: do not expose broken video output streams
The cx25821 driver has support for one audio output channel and two video
output channels.
This is implemented in a very ugly and very evil way through a custom ioctl
that passes the filename of a file containing the video data, which is then
read by the driver itself using vfs.
There are a number of problems with this:
1) it's very ugly and very evil (I can't say that often enough).
2) V4L2 supports video output, so why not use that?
3) it's very buggy, closing the filehandle through which you passed the ioctl
   will oops the kernel.
4) it's a nasty security leak since this allows you to load any file in the
   system as a video or audio source, so in theory you can output /etc/passwd
   to audio or video out and record & decode it on another device.
Because of all these issues we no longer register those output video nodes.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-15 08:28:41 -03:00
Tommi Rantala
8176cced70 perf: Treat attr.config as u64 in perf_swevent_init()
Trinity discovered that we fail to check all 64 bits of
attr.config passed by user space, resulting to out-of-bounds
access of the perf_swevent_enabled array in
sw_perf_event_destroy().

Introduced in commit b0a873ebb ("perf: Register PMU
implementations").

Signed-off-by: Tommi Rantala <tt.rantala@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: davej@redhat.com
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/1365882554-30259-1-git-send-email-tt.rantala@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-04-15 11:42:12 +02:00
Kevin Hao
d8b9229240 powerpc: add a missing label in resume_kernel
A label 0 was missed in the patch a9c4e541 (powerpc/kprobe: Complete
kprobe and migrate exception frame). This will cause the kernel
branch to an undetermined address if there really has a conflict when
updating the thread flags.

Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Acked-By: Tiejun Chen <tiejun.chen@windriver.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2013-04-15 17:29:48 +10:00
Alistair Popple
05e38e5d5d powerpc: Fix audit crash due to save/restore PPR changes
The current mainline crashes when hitting userspace with the following:

kernel BUG at kernel/auditsc.c:1769!
cpu 0x1: Vector: 700 (Program Check) at [c000000023883a60]
    pc: c0000000001047a8: .__audit_syscall_entry+0x38/0x130
    lr: c00000000000ed64: .do_syscall_trace_enter+0xc4/0x270
    sp: c000000023883ce0
   msr: 8000000000029032
  current = 0xc000000023800000
  paca    = 0xc00000000f080380   softe: 0        irq_happened: 0x01
    pid   = 1629, comm = start_udev
kernel BUG at kernel/auditsc.c:1769!
enter ? for help
[c000000023883d80] c00000000000ed64 .do_syscall_trace_enter+0xc4/0x270
[c000000023883e30] c000000000009b08 syscall_dotrace+0xc/0x38
 --- Exception: c00 (System Call) at 0000008010ec50dc

Bisecting found the following patch caused it:

commit 44e9309f1f
Author: Haren Myneni <haren@linux.vnet.ibm.com>
powerpc: Implement PPR save/restore

It was found this patch corrupted r9 when calling
SET_DEFAULT_THREAD_PPR()

Using r10 as a scratch register instead of r9 solved the problem.

Signed-off-by: Alistair Popple <alistair@popple.id.au>
Acked-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2013-04-15 17:29:45 +10:00
Andy Lutomirski
41c21e351e userns: Changing any namespace id mappings should require privileges
Changing uid/gid/projid mappings doesn't change your id within the
namespace; it reconfigures the namespace.  Unprivileged programs should
*not* be able to write these files.  (We're also checking the privileges
on the wrong task.)

Given the write-once nature of these files and the other security
checks, this is likely impossible to usefully exploit.

Signed-off-by: Andy Lutomirski <luto@amacapital.net>
2013-04-14 18:11:32 -07:00
Andy Lutomirski
e3211c120a userns: Check uid_map's opener's fsuid, not the current fsuid
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
2013-04-14 18:11:31 -07:00
Eric W. Biederman
6708075f10 userns: Don't let unprivileged users trick privileged users into setting the id_map
When we require privilege for setting /proc/<pid>/uid_map or
/proc/<pid>/gid_map no longer allow an unprivileged user to
open the file and pass it to a privileged program to write
to the file.

Instead when privilege is required require both the opener and the
writer to have the necessary capabilities.

I have tested this code and verified that setting /proc/<pid>/uid_map
fails when an unprivileged user opens the file and a privielged user
attempts to set the mapping, that unprivileged users can still map
their own id, and that a privileged users can still setup an arbitrary
mapping.

Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
2013-04-14 18:11:14 -07:00
Cong Wang
f88c91ddba ipv6: statically link register_inet6addr_notifier()
Tomas reported the following build error:

net/built-in.o: In function `ieee80211_unregister_hw':
(.text+0x10f0e1): undefined reference to `unregister_inet6addr_notifier'
net/built-in.o: In function `ieee80211_register_hw':
(.text+0x10f610): undefined reference to `register_inet6addr_notifier'
make: *** [vmlinux] Error 1

when built IPv6 as a module.

So we have to statically link these symbols.

Reported-by: Tomas Melin <tomas.melin@iki.fi>
Cc: Tomas Melin <tomas.melin@iki.fi>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: YOSHIFUJI Hidaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-14 15:24:17 -04:00
Thomas Petazzoni
2e0cbf2cc2 net: mvmdio: add select PHYLIB
The mvmdio driver uses the phylib API, so it should select the PHYLIB
symbol, otherwise, a build with mvmdio (but without mvneta) fails to
build with undefined symbols such as mdiobus_unregister, mdiobus_free,
etc.

The mvneta driver does not use the phylib API directly, so it does not
need to select PHYLIB. It already selects the mvmdio driver anyway.

Historically, this problem is due to the fact that the PHY handling
was originally part of mvneta, and was later moved to a separate
driver, without updating the Kconfig select statements
accordingly. And since there was no functional reason to use mvmdio
without mvneta, this case was not tested.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-13 16:48:06 -04:00
David Ward
fb745e9a03 net/802/mrp: fix possible race condition when calling mrp_pdu_queue()
(Adapted from a very similar change to net/802/garp.c by Cong Wang.)

mrp_pdu_queue() should ways be called with the applicant spin lock.
mrp_uninit_applicant() only holds the rtnl lock which is not enough;
a race is possible because mrp_rcv() is called in BH context:

	mrp_rcv()
	  |->mrp_pdu_parse_msg()
	    |->mrp_pdu_parse_vecattr()
	      |->mrp_pdu_parse_vecattr_event()
	        |-> mrp_attr_event()
	          |-> mrp_pdu_append_vecattr_event()
	            |-> mrp_pdu_queue()

Cc: Cong Wang <amwang@redhat.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David Ward <david.ward@ll.mit.edu>
Acked-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-12 15:10:48 -04:00
Wei Yongjun
3be8fbab18 tuntap: fix error return code in tun_set_iff()
Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.

[ Bug added in linux-3.8 , commit 4008e97f86
  ("tuntap: fix ambigious multiqueue API") ]

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-12 15:00:04 -04:00
Ivan Vecera
f11a869d4e be2net: take care of __vlan_put_tag return value
The driver should use return value of __vlan_put_tag with appropriate
NULL-check instead of old skb pointer.

Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-12 14:55:25 -04:00
David S. Miller
d900d12052 Merge branch 'fixes-for-3.9' of git://gitorious.org/linux-can/linux-can
Marc Kleine-Budde says:

====================
here's another fix for the v3.9 release cycle, if not too late:

Christoph Fritz fixed the device tree property handling on little endian
systems in the sja1000 device tree driver. It was Mylene Josserand who noticed
that the mcp251x spi CAN driver cannot request its interrupt anymore, as the
driver is using a threaded interrupt handler without a primary one and without
specifying IRQF_ONESHOT (which is needed since v3.5). A patch by me fixes this
problem.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-12 14:29:28 -04:00
David S. Miller
8b5b8c2990 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf into netfilter
Pablo Neira Ayuso says:

====================
The following patchset contains late netfilter fixes for your net
tree, they are:

* Don't drop segmented TCP packets in the SIP helper, we've got reports
  from users that this was breaking communications when the SIP phone
  messages are larger than the MTU, from Patrick McHardy.

* Fix refcount leak in the ipset list set, from Jozsef Kadlecsik.

* On hash set resizing, the nomatch flag was lost, thus entirely inverting
  the logic of the set matching, from Jozsef Kadlecsik.

* Fix crash on NAT modules removal. Timer expiration may race with the
  module cleanup exit path while deleting conntracks, from Florian
  Westphal.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-12 14:26:39 -04:00
Felix Fietkau
f09a878511 ath9k_hw: change AR9580 initvals to fix a stability issue
The hardware parsing of Control Wrapper Frames needs to be disabled, as
it has been causing spurious decryption error reports. The initvals for
other chips have been updated to disable it, but AR9580 was left out for
some reason.

Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-12 13:22:09 -04:00
John W. Linville
bef086e08e Merge branch 'for-john' of git://x-git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 2013-04-12 13:20:51 -04:00
Thomas Gleixner
f2530dc71c kthread: Prevent unpark race which puts threads on the wrong cpu
The smpboot threads rely on the park/unpark mechanism which binds per
cpu threads on a particular core. Though the functionality is racy:

CPU0	       	 	CPU1  	     	    CPU2
unpark(T)				    wake_up_process(T)
  clear(SHOULD_PARK)	T runs
			leave parkme() due to !SHOULD_PARK  
  bind_to(CPU2)		BUG_ON(wrong CPU)						    

We cannot let the tasks move themself to the target CPU as one of
those tasks is actually the migration thread itself, which requires
that it starts running on the target cpu right away.

The solution to this problem is to prevent wakeups in park mode which
are not from unpark(). That way we can guarantee that the association
of the task to the target cpu is working correctly.

Add a new task state (TASK_PARKED) which prevents other wakeups and
use this state explicitly for the unpark wakeup.

Peter noticed: Also, since the task state is visible to userspace and
all the parked tasks are still in the PID space, its a good hint in ps
and friends that these tasks aren't really there for the moment.

The migration thread has another related issue.

CPU0	      	     	 CPU1
Bring up CPU2
create_thread(T)
park(T)
 wait_for_completion()
			 parkme()
			 complete()
sched_set_stop_task()
			 schedule(TASK_PARKED)

The sched_set_stop_task() call is issued while the task is on the
runqueue of CPU1 and that confuses the hell out of the stop_task class
on that cpu. So we need the same synchronizaion before
sched_set_stop_task().

Reported-by: Dave Jones <davej@redhat.com>
Reported-and-tested-by: Dave Hansen <dave@sr71.net>
Reported-and-tested-by: Borislav Petkov <bp@alien8.de>
Acked-by: Peter Ziljstra <peterz@infradead.org>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: dhillf@gmail.com
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1304091635430.21884@ionos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-04-12 14:18:43 +02:00
Christoph Fritz
0443de5fbf can: sja1000: fix handling on dt properties on little endian systems
To get correct endianes on little endian cpus (like arm) while reading device
tree properties, this patch replaces of_get_property() with
of_property_read_u32(). While there use of_property_read_bool() for the
handling of the boolean "nxp,no-comparator-bypass" property.

Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-04-12 13:03:01 +02:00
Marc Kleine-Budde
db388d6460 can: mcp251x: add missing IRQF_ONESHOT to request_threaded_irq
Since commit:

    1c6c695 genirq: Reject bogus threaded irq requests

threaded irqs must provide a primary handler or set the IRQF_ONESHOT flag.
Since the mcp251x driver doesn't make use of a primary handler set the
IRQF_ONESHOT flag.

Cc: linux-stable <stable@vger.kernel.org> # >= v3.5
Reported-by: Mylene Josserand <Mylene.Josserand@navocap.com>
Tested-by: Mylene Josserand <Mylene.Josserand@navocap.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-04-12 11:56:12 +02:00
Florian Westphal
c2d421e171 netfilter: nf_nat: fix race when unloading protocol modules
following oops was reported:
RIP: 0010:[<ffffffffa03227f2>]  [<ffffffffa03227f2>] nf_nat_cleanup_conntrack+0x42/0x70 [nf_nat]
RSP: 0018:ffff880202c63d40  EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8801ac7bec28 RCX: ffff8801d0eedbe0
RDX: dead000000200200 RSI: 0000000000000011 RDI: ffffffffa03265b8
[..]
Call Trace:
 [..]
 [<ffffffffa02febed>] destroy_conntrack+0xbd/0x110 [nf_conntrack]

Happens when a conntrack timeout expires right after first part
of the nat cleanup has completed (bysrc hash removal), but before
part 2 has completed (re-initialization of nat area).

[ destroy callback tries to delete bysrc again ]

Patrick suggested to just remove the affected conntracks -- the
connections won't work properly anyway without nat transformation.

So, lets do that.

Reported-by: CAI Qian <caiqian@redhat.com>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-12 11:46:31 +02:00
Thomas Graf
50bceae9bd tcp: Reallocate headroom if it would overflow csum_start
If a TCP retransmission gets partially ACKed and collapsed multiple
times it is possible for the headroom to grow beyond 64K which will
overflow the 16bit skb->csum_start which is based on the start of
the headroom. It has been observed rarely in the wild with IPoIB due
to the 64K MTU.

Verify if the acking and collapsing resulted in a headroom exceeding
what csum_start can cover and reallocate the headroom if so.

A big thank you to Jim Foraker <foraker1@llnl.gov> and the team at
LLNL for helping out with the investigation and testing.

Reported-by: Jim Foraker <foraker1@llnl.gov>
Signed-off-by: Thomas Graf <tgraf@suug.ch>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-11 18:12:41 -04:00
Christian Ruppert
7078b98422 stmmac: prevent interrupt loop with MMC RX IPC Counter
If the DesignWare MAC is synthesised with MMC RX IPC Counter, an unmanaged
and unacknowledged interrupt is generated after some time of operation.

This patch masks the undesired interrupts.

Signed-off-by: Christian Ruppert <christian.ruppert@abilis.com>
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-11 16:03:22 -04:00
nikolay@redhat.com
b6a5a7b9a5 bonding: IFF_BONDING is not stripped on enslave failure
While enslaving a new device and after IFF_BONDING flag is set, in case
of failure it is not stripped from the device's priv_flags while
cleaning up, which could lead to other problems.
Cleaning at err_close because the flag is set after dev_open().

v2: no change

Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-11 16:01:47 -04:00
nikolay@redhat.com
6101391d4a bonding: fix netdev event NULL pointer dereference
In commit 471cb5a33d ("bonding: remove
usage of dev->master") a bug was introduced which causes a NULL pointer
dereference. If a bond device is in mode 6 (ALB) and a slave is added
it will dereference a NULL pointer in bond_slave_netdev_event().
This is because in bond_enslave we have bond_alb_init_slave() which
changes the MAC address of the slave and causes a NETDEV_CHANGEADDR.
Then we have in bond_slave_netdev_event():
        struct slave *slave = bond_slave_get_rtnl(slave_dev);
        struct bonding *bond = slave->bond;
bond_slave_get_rtnl() dereferences slave_dev->rx_handler_data which at
that time is NULL since netdev_rx_handler_register() is called later.

This is fixed by checking if slave is NULL before dereferencing it.

v2: Comment style changed.

Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-11 16:01:47 -04:00
Dmitry Popov
d66954a066 tcp: incoming connections might use wrong route under synflood
There is a bug in cookie_v4_check (net/ipv4/syncookies.c):
	flowi4_init_output(&fl4, 0, sk->sk_mark, RT_CONN_FLAGS(sk),
			   RT_SCOPE_UNIVERSE, IPPROTO_TCP,
			   inet_sk_flowi_flags(sk),
			   (opt && opt->srr) ? opt->faddr : ireq->rmt_addr,
			   ireq->loc_addr, th->source, th->dest);

Here we do not respect sk->sk_bound_dev_if, therefore wrong dst_entry may be
taken. This dst_entry is used by new socket (get_cookie_sock ->
tcp_v4_syn_recv_sock), so its packets may take the wrong path.

Signed-off-by: Dmitry Popov <dp@highloadlab.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-11 16:01:46 -04:00
Richard Weinberger
7791c8423f x86,efi: Check max_size only if it is non-zero.
Some EFI implementations return always a MaximumVariableSize of 0,
check against max_size only if it is non-zero.
My Intel DQ67SW desktop board has such an implementation.

Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-04-11 15:45:52 +01:00
Scott Wood
4d2be6f7c7 kvm/ppc/e500: eliminate tlb_refs
Commit 523f0e5421 ("KVM: PPC: E500:
Explicitly mark shadow maps invalid") began using E500_TLB_VALID
for guest TLB1 entries, and skipping invalidations if it's not set.

However, when E500_TLB_VALID was set for such entries, it was on a
fake local ref, and so the invalidations never happen.  gtlb_privs
is documented as being only for guest TLB0, though we already violate
that with E500_TLB_BITMAP.

Now that we have MMU notifiers, and thus don't need to actually
retain a reference to the mapped pages, get rid of tlb_refs, and
use gtlb_privs for E500_TLB_VALID in TLB1.

Since we can have more than one host TLB entry for a given tlbe_ref,
be careful not to clear existing flags that are relevant to other
host TLB entries when preparing a new host TLB entry.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-11 15:53:43 +02:00
Scott Wood
66a5fecdcc kvm/ppc/e500: g2h_tlb1_map: clear old bit before setting new bit
It's possible that we're using the same host TLB1 slot to map (a
presumably different portion of) the same guest TLB1 entry.  Clear
the bit in the map before setting it, so that if the esels are the same
the bit will remain set.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-11 15:53:38 +02:00
Scott Wood
6b2ba1a912 kvm/ppc/e500: h2g_tlb1_rmap: esel 0 is valid
Add one to esel values in h2g_tlb1_rmap, so that "no mapping" can be
distinguished from "esel 0".  Note that we're not saved by the fact
that host esel 0 is reserved for non-KVM use, because KVM host esel
numbering is not the raw host numbering (see to_htlb1_esel).

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-11 15:53:34 +02:00
Scott Wood
c5e6cb051c kvm/powerpc/e500mc: fix tlb invalidation on cpu migration
The existing check handles the case where we've migrated to a different
core than we last ran on, but it doesn't handle the case where we're
still on the same cpu we last ran on, but some other vcpu has run on
this cpu in the meantime.

Without this, guest segfaults (and other misbehavior) have been seen in
smp guests.

Cc: stable@vger.kernel.org # 3.8.x
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-11 00:06:39 +02:00
Kishon Vijay Abraham I
f4d7a536fa ARM: OMAP4: hwmod data: make 'ocp2scp_usb_phy_phy_48m" as the main clock
Commit 92702df357 ("ARM: OMAP4: PM: fix PM regression introduced by recent
clock cleanup") makes the 'ocp2scp_usb_phy_phy_48m' as optional
functional clock causing regression in MUSB. But this 48MHz clock is a
mandatory clock for usb phy attached to ocp2scp and hence made as the main
clock for ocp2scp.

Cc: Keerthy <j-keerthy@ti.com>
Cc: Benoît Cousson <b-cousson@ti.com>
Cc: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
[paul@pwsan.com: add comment to the hwmod data to try to prevent any
 future mistakes here]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-04-10 13:26:07 -07:00
Johannes Berg
7b119dc06d mac80211: fix cfg80211 interaction on auth/assoc request
If authentication (or association with FT) is requested by
userspace, mac80211 currently doesn't tell cfg80211 that it
disconnected from the AP. That leaves inconsistent state:
cfg80211 thinks it's connected while mac80211 thinks it's
not. Typically this won't last long, as soon as mac80211
reports the new association to cfg80211 the old one goes
away. If, however, the new authentication or association
doesn't succeed, then cfg80211 will forever think the old
one still exists and will refuse attempts to authenticate
or associate with the AP it thinks it's connected to.

Anders reported that this leads to it taking a very long
time to reconnect to a network, or never even succeeding.
I tested this with an AP hacked to never respond to auth
frames, and one that works, and with just those two the
system never recovers because one won't work and cfg80211
thinks it's connected to the other so refuses connections
to it.

To fix this, simply make mac80211 tell cfg80211 when it is
no longer connected to the old AP, while authenticating or
associating to a new one.

Cc: stable@vger.kernel.org
Reported-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-10 21:38:36 +02:00
Rafał Miłecki
46fc4c9093 ssb: implement spurious tone avoidance
And make use of it in b43. This fixes a regression introduced with
49d55cef5b
b43: N-PHY: implement spurious tone avoidance
This commit made BCM4322 use only MCS 0 on channel 13, which of course
resulted in performance drop (down to 0.7Mb/s).

Reported-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-10 10:31:26 -04:00
Andreas Schwab
a54292f58f kbuild: generate generic headers before recursing into scripts
The headers are now needed inside scripts/mod since 6543bec
("mod/file2alias: make modalias generation safe for cross compiling").

Reported-and-tested-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Reported-and-tested-by: "Jon Medhurst (Tixy)" <tixy@linaro.org>
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
2013-04-10 09:55:34 +02:00
Mathias Krause
72a763d805 crypto: algif - suppress sending source address information in recvmsg
The current code does not set the msg_namelen member to 0 and therefore
makes net/socket.c leak the local sockaddr_storage variable to userland
-- 128 bytes of kernel stack memory. Fix that.

Cc: <stable@vger.kernel.org> # 2.6.38
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2013-04-10 14:26:06 +08:00
Michael Neuling
f110c0c192 powerpc: fix compiling CONFIG_PPC_TRANSACTIONAL_MEM when CONFIG_ALTIVEC=n
We can't compile a kernel with CONFIG_ALTIVEC=n when
CONFIG_PPC_TRANSACTIONAL_MEM=y.  We currently get:

arch/powerpc/kernel/tm.S:320: Error: unsupported relocation against THREAD_VSCR
arch/powerpc/kernel/tm.S:323: Error: unsupported relocation against THREAD_VR0
arch/powerpc/kernel/tm.S:323: Error: unsupported relocation against THREAD_VR0
etc.

The below fixes this with a sprinkling of #ifdefs.

This was found by mpe with kisskb:
  http://kisskb.ellerman.id.au/kisskb/buildresult/8539442/

Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2013-04-10 08:14:39 +10:00
Jozsef Kadlecsik
6eb4c7e96e netfilter: ipset: hash:*net*: nomatch flag not excluded on set resize
If a resize is triggered the nomatch flag is not excluded at hashing,
which leads to the element missed at lookup in the resized set.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-09 21:04:16 +02:00
Jozsef Kadlecsik
02f815cb6d netfilter: ipset: list:set: fix reference counter update
The last element can be replaced or pushed off and in both
cases the reference counter must be updated.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-09 21:02:11 +02:00
Matt Fleming
a6e4d5a03e x86, efivars: firmware bug workarounds should be in platform code
Let's not burden ia64 with checks in the common efivars code that we're not
writing too much data to the variable store. That kind of thing is an x86
firmware bug, plain and simple.

efi_query_variable_store() provides platforms with a wrapper in which they can
perform checks and workarounds for EFI variable storage bugs.

Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2013-04-09 11:34:05 +01:00
Arend van Spriel
25b5632fb3 brcmsmac: request firmware in .start() callback
The firmware is requested from user-space. To assure the request
is handled it is recommended to do the request upon IFF_UP. For
a mac80211 driver the .start() callback can be considered the
equivalent.

Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Piotr Haber <phaber@broadcom.com>
Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08 14:35:04 -04:00
Arend van Spriel
1527c343c1 brcmfmac: remove advertising P2P device support
For v3.9 kernel the P2P functionality was merged, but it does
not fully support the P2P_DEVICE interface type. This patch
removes advertising that support.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08 14:35:04 -04:00
Felix Fietkau
319e7bd96a ath9k_htc: accept 1.x firmware newer than 1.3
Since the firmware has been open sourced, the minor version has been
bumped to 1.4 and the API/ABI will stay compatible across further 1.x
releases.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@vger.kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08 14:35:03 -04:00
Zefir Kurtisi
5d8cd3b16e ath9k: fix DFS detector called in softirq context
Signed-off-by: Zefir Kurtisi <zefir.kurtisi@neratec.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-08 14:35:03 -04:00
John W. Linville
8cab24f0b1 Merge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 2013-04-08 14:30:26 -04:00
Johannes Berg
62a40a1555 mac80211: fix LED in idle handling
feng xiangjun reports that my

commit 382a103b2b
Author: Johannes Berg <johannes.berg@intel.com>
Date:   Fri Mar 22 22:30:09 2013 +0100

    mac80211: fix idle handling sequence

broke the wireless status LED. The reason is that
we now call ieee80211_idle_off() when the channel
context is assigned, and that doesn't recalculate
the LED state. Fix this by making that function a
wrapper around most of idle recalculation while
forcing active.

Reported-by: feng xiangjun <fengxj325@gmail.com>
Tested-by: feng xiangjun <fengxj325@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-04-08 13:12:05 +02:00
Russell King
b6c7aabd92 ARM: Do 15e0d9e37c (ARM: pm: let platforms select cpu_suspend support) properly
Let's do the changes properly and fix the same problem everywhere, not
just for one case.

Cc: <stable@vger.kernel.org> # kernels containing 15e0d9e37c or equivalent
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-04-08 12:00:38 +01:00
Jason Gerecke
e55b6a843b Input: wacom - fix "can not retrieve extra class descriptor" for 24HDT
The MFT device in the Cintiq 24HDT has two interfaces sharing the
same configuration. Without this patch, the driver attempts to
make use of both interfaces, even though the second interface is
not compatible with this driver.

Signed-off-by: Jason Gerecke <killertofu@gmail.com>
Tested-by: Ping Cheng <pingc@wacom.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2013-04-07 21:03:55 -07:00
Patrick McHardy
3a7b21eaf4 netfilter: nf_ct_sip: don't drop packets with offsets pointing outside the packet
Some Cisco phones create huge messages that are spread over multiple packets.
After calculating the offset of the SIP body, it is validated to be within
the packet and the packet is dropped otherwise. This breaks operation of
these phones. Since connection tracking is supposed to be passive, just let
those packets pass unmodified and untracked.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-04-06 14:03:18 +02:00
Mauro Carvalho Chehab
f1b0c8217f [media] mb86a20s: Fix estimate_rate setting
As reported by Dan Carpenter <dan.carpenter@oracle.com>:

	Smatch warnings:
	drivers/media/dvb-frontends/mb86a20s.c:644 mb86a20s_layer_bitrate() error: buffer overflow 'state->estimated_rate' 3 <= 3

What happens there is that estimate_rate index should be the layer
number, and not the guard interval.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-04-04 14:32:13 -03:00
Sam Ravnborg
cbf1ef6b33 sparc: use asm-generic version of types.h
In sparc headers we use the following pattern:

    #if defined(__sparc__) && defined(__arch64__)

    sparc64 specific stuff

    #else

    sparc32 specific stuff

    #endif

In types.h this pattern was not followed and here
we only checked for __sparc__ for no good reason.
It was a left-over from long time ago.

I checked other architectures - and most of them
do not have any such checks. And all the recently
merged versions uses the asm-generic version.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-31 19:29:13 -04:00
Sam Ravnborg
6e51f85730 bbc_i2c: fix section mismatch warning
Fix following warning:

WARNING: drivers/sbus/char/bbc.o(.text+0x674): Section mismatch in reference from the function bbc_i2c_probe() to the function .init.text:T.463()
The function bbc_i2c_probe() references the function __init T.463().
This is often because bbc_i2c_probe lacks a __init
annotation or the annotation of T.463 is wrong.

bbc_i2c_probe() referenced the inlined attach_one_i2c().
As probe may be called after init drop __init annotations
on all functions used by bbc_i2c_probe()

The warning was seen with a sparc64 defconfig build

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-31 19:29:12 -04:00
Sam Ravnborg
a2d34dd412 sparc: use generic headers
Use "generic-y" to add generic headers where possible

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-31 19:29:12 -04:00
Kefeng Wang
bf3aece8af sparc:cleanup unused code in smp_32.h
After genirq and generic clockevent support at sparc32,
smp4m_irq_rotate(), prof_multiplier() and prof_counter()
are no longer used and should be removed.

Find more info from commit 6baa9b20 & 62f08283.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-31 19:29:12 -04:00
Akinobu Mita
9a0ac1b6af sparc/iommu: fix typo s/265KB/256KB/
IOMMU_NPTES is 64K PTEs, so the size is 256KB (= 64K * sizeof(iopte_t))

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-31 19:29:12 -04:00
Akinobu Mita
54df2db36c sparc/srmmu: clear trailing edge of bitmap properly
srmmu_nocache_bitmap is cleared by bit_map_init().  But bit_map_init()
attempts to clear by memset(), so it can't clear the trailing edge of
bitmap properly on big-endian architecture if the number of bits is not
a multiple of BITS_PER_LONG.

Actually, the number of bits in srmmu_nocache_bitmap is not always
a multiple of BITS_PER_LONG.  It is calculated as below:

        bitmap_bits = srmmu_nocache_size >> SRMMU_NOCACHE_BITMAP_SHIFT;

srmmu_nocache_size is decided proportionally by the amount of system RAM
and it is rounded to a multiple of PAGE_SIZE.  SRMMU_NOCACHE_BITMAP_SHIFT
is defined as (PAGE_SHIFT - 4).  So it can only be said that bitmap_bits
is a multiple of 16.

This fixes the problem by using bitmap_clear() instead of memset()
in bit_map_init() and this also uses BITS_TO_LONGS() to calculate correct
size at bitmap allocation time.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: sparclinux@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-31 19:29:12 -04:00
Kefeng Wang
71196a26d8 sparc:remove unused declaration smp_boot_cpus()
smp_boot_cpus() was replaced smp_prepare_cpus() long ago, and it no
longer needed, so delete it.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-31 19:29:12 -04:00
Hong Zhiguo
d3e1101c9b openvswitch: correct an invalid BUG_ON
table->count is uint32_t

Signed-off-by: Hong Zhiguo <honkiko@gmail.com>
Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-03-27 09:07:41 -07:00
Jesse Gross
a9341512c3 openvswitch: Preallocate reply skb in ovs_vport_cmd_set().
Allocation of the Netlink notification skb can potentially fail
after changing vport configuration.  In general, we try to avoid
this by undoing any change we made but that is difficult for existing
objects.  This avoids the problem by preallocating the buffer (which
is fixed size).

Signed-off-by: Jesse Gross <jesse@nicira.com>
2013-03-27 09:07:40 -07:00
Michael Bohan
84cc8fd2fe hrtimer: Don't reinitialize a cpu_base lock on CPU_UP
The current code makes the assumption that a cpu_base lock won't be
held if the CPU corresponding to that cpu_base is offline, which isn't
always true.

If a hrtimer is not queued, then it will not be migrated by
migrate_hrtimers() when a CPU is offlined. Therefore, the hrtimer's
cpu_base may still point to a CPU which has subsequently gone offline
if the timer wasn't enqueued at the time the CPU went down.

Normally this wouldn't be a problem, but a cpu_base's lock is blindly
reinitialized each time a CPU is brought up. If a CPU is brought
online during the period that another thread is performing a hrtimer
operation on a stale hrtimer, then the lock will be reinitialized
under its feet, and a SPIN_BUG() like the following will be observed:

<0>[   28.082085] BUG: spinlock already unlocked on CPU#0, swapper/0/0
<0>[   28.087078]  lock: 0xc4780b40, value 0x0 .magic: dead4ead, .owner: <none>/-1, .owner_cpu: -1
<4>[   42.451150] [<c0014398>] (unwind_backtrace+0x0/0x120) from [<c0269220>] (do_raw_spin_unlock+0x44/0xdc)
<4>[   42.460430] [<c0269220>] (do_raw_spin_unlock+0x44/0xdc) from [<c071b5bc>] (_raw_spin_unlock+0x8/0x30)
<4>[   42.469632] [<c071b5bc>] (_raw_spin_unlock+0x8/0x30) from [<c00a9ce0>] (__hrtimer_start_range_ns+0x1e4/0x4f8)
<4>[   42.479521] [<c00a9ce0>] (__hrtimer_start_range_ns+0x1e4/0x4f8) from [<c00aa014>] (hrtimer_start+0x20/0x28)
<4>[   42.489247] [<c00aa014>] (hrtimer_start+0x20/0x28) from [<c00e6190>] (rcu_idle_enter_common+0x1ac/0x320)
<4>[   42.498709] [<c00e6190>] (rcu_idle_enter_common+0x1ac/0x320) from [<c00e6440>] (rcu_idle_enter+0xa0/0xb8)
<4>[   42.508259] [<c00e6440>] (rcu_idle_enter+0xa0/0xb8) from [<c000f268>] (cpu_idle+0x24/0xf0)
<4>[   42.516503] [<c000f268>] (cpu_idle+0x24/0xf0) from [<c06ed3c0>] (rest_init+0x88/0xa0)
<4>[   42.524319] [<c06ed3c0>] (rest_init+0x88/0xa0) from [<c0c00978>] (start_kernel+0x3d0/0x434)

As an example, this particular crash occurred when hrtimer_start() was
executed on CPU #0. The code locked the hrtimer's current cpu_base
corresponding to CPU #1. CPU #0 then tried to switch the hrtimer's
cpu_base to an optimal CPU which was online. In this case, it selected
the cpu_base corresponding to CPU #3.

Before it could proceed, CPU #1 came online and reinitialized the
spinlock corresponding to its cpu_base. Thus now CPU #0 held a lock
which was reinitialized. When CPU #0 finally ended up unlocking the
old cpu_base corresponding to CPU #1 so that it could switch to CPU
#3, we hit this SPIN_BUG() above while in switch_hrtimer_base().

CPU #0                            CPU #1
----                              ----
...                               <offline>
hrtimer_start()
lock_hrtimer_base(base #1)
...                               init_hrtimers_cpu()
switch_hrtimer_base()             ...
...                               raw_spin_lock_init(&cpu_base->lock)
raw_spin_unlock(&cpu_base->lock)  ...
<spin_bug>

Solve this by statically initializing the lock.

Signed-off-by: Michael Bohan <mbohan@codeaurora.org>
Link: http://lkml.kernel.org/r/1363745965-23475-1-git-send-email-mbohan@codeaurora.org
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-03-26 21:34:57 +01:00
Abhijeet Dharmapurikar
bad9a43a20 irqchip: gic: fix irq_trigger return
The genirq layer expects a 0 in case that the retrigger function is
not able to resend the irq in hardware, but the code is returning
-ENXIO. Fix it.

[ tglx: Reworked comment and changelog ]

Signed-off-by: Abhijeet Dharmapurikar <adharmap@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1363734349-32635-1-git-send-email-sboyd@codeaurora.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-03-26 20:52:25 +01:00
Will Deacon
d455bac223 ARM: modules: don't export cpu_set_pte_ext when !MMU
cpu_set_pte_ext is only guaranteed to be defined when CONFIG_MMU, so
don't export it to modules otherwise.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2013-03-26 09:55:34 +00:00
Will Deacon
794fe85da4 ARM: mm: remove broken condition check for v4 flushing
There's no point having a conditional cache flush if we don't know the
state of the condition beforehand.

This patch makes the cacheflush in v4_flush_user_cache_range
unconditional.

signed-off-by: will deacon <will.deacon@arm.com>
2013-03-26 09:55:34 +00:00
Will Deacon
3ef52f2a00 ARM: mm: fix numerous hideous errors in proc-arm740.S
The setup code in proc-arm740.S is completely broken and, as far as I
can tell, always has been. I was >this< close to ripping it out, when a
740t core-tile materialised in the office, so I've had a crack at fixing
things up:

	- Fix the ram/flash area calculations so that we actually set
	  the condition flags before testing them...
	- Fix the proc_info structure so that __cpu_io_mmu_flags are
	  defined as 0, placing the __cpu_flush pointer at the correct
	  offset
	- Re-number the registers used during __arm740_setup so that
	  we don't clobber the machine ID et al
	- Advertise Thumb support via the hwcaps, since 740T is the only
	  740 implementation.

Acked-by: Hyok S. Choi <hyok.choi@samsung.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2013-03-26 09:55:33 +00:00
Will Deacon
82d9b0d0c6 ARM: cache: remove ARMv3 support code
This is only used by 740t, which is a v4 core and (by my reading of the
datasheet for the CPU) ignores CRm for the cp15 cache flush operation,
making the v4 cache implementation in cache-v4.S sufficient for this
CPU.

Tested with 740T core-tile on Integrator/AP baseboard.

Acked-by: Hyok S. Choi <hyok.choi@samsung.com>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2013-03-26 09:55:23 +00:00
Will Deacon
4cc3daaf39 ARM: tlbflush: remove ARMv3 support
We no longer support any ARMv3 platforms, so remove the old tlbflushing
code.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2013-03-25 13:31:55 +00:00
Len Brown
149c2319c6 tools/power turbostat: additional Haswell CPU-id
There is an additional HSW CPU-id, 0x46,
which has C-states exactly like CPU-id 0x45.

Signed-off-by: Len Brown <len.brown@intel.com>
2013-03-15 11:05:26 -04:00
Len Brown
0b15841b0b intel_idle: additional Haswell CPU-id
There is an additional HSW CPU-id, 0x46,
which has C-states exactly like CPU-id 0x45.

Signed-off-by: Len Brown <len.brown@intel.com>
2013-03-15 10:55:31 -04:00
210 changed files with 2233 additions and 1539 deletions

View File

@@ -596,9 +596,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
is selected automatically. Check
Documentation/kdump/kdump.txt for further details.
crashkernel_low=size[KMG]
[KNL, x86] parts under 4G.
crashkernel=range1:size1[,range2:size2,...][@offset]
[KNL] Same as above, but depends on the memory
in the running system. The syntax of range is
@@ -606,6 +603,26 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
a memory unit (amount[KMG]). See also
Documentation/kdump/kdump.txt for an example.
crashkernel=size[KMG],high
[KNL, x86_64] range could be above 4G. Allow kernel
to allocate physical memory region from top, so could
be above 4G if system have more than 4G ram installed.
Otherwise memory region will be allocated below 4G, if
available.
It will be ignored if crashkernel=X is specified.
crashkernel=size[KMG],low
[KNL, x86_64] range under 4G. When crashkernel=X,high
is passed, kernel could allocate physical memory region
above 4G, that cause second kernel crash on system
that require some amount of low memory, e.g. swiotlb
requires at least 64M+32K low memory. Kernel would
try to allocate 72M below 4G automatically.
This one let user to specify own low range under 4G
for second kernel instead.
0: to disable low allocation.
It will be ignored when crashkernel=X,high is not used
or memory reserved is below 4G.
cs89x0_dma= [HW,NET]
Format: <dma>
@@ -788,6 +805,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
edd= [EDD]
Format: {"off" | "on" | "skip[mbr]"}
efi_no_storage_paranoia [EFI; X86]
Using this parameter you can use more than 50% of
your efi variable storage. Use this parameter only if
you are really sure that your UEFI does sane gc and
fulfills the spec otherwise your board may brick.
eisa_irq_edge= [PARISC,HW]
See header of drivers/parisc/eisa.c.

View File

@@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 9
SUBLEVEL = 0
EXTRAVERSION = -rc7
EXTRAVERSION =
NAME = Unicycling Gorilla
# *DOCUMENTATION*
@@ -513,7 +513,8 @@ ifeq ($(KBUILD_EXTMOD),)
# Carefully list dependencies so we do not try to build scripts twice
# in parallel
PHONY += scripts
scripts: scripts_basic include/config/auto.conf include/config/tristate.conf
scripts: scripts_basic include/config/auto.conf include/config/tristate.conf \
asm-generic
$(Q)$(MAKE) $(build)=$(@)
# Objects we will link into vmlinux / subdirs we need to visit

View File

@@ -19,14 +19,6 @@
#undef _CACHE
#undef MULTI_CACHE
#if defined(CONFIG_CPU_CACHE_V3)
# ifdef _CACHE
# define MULTI_CACHE 1
# else
# define _CACHE v3
# endif
#endif
#if defined(CONFIG_CPU_CACHE_V4)
# ifdef _CACHE
# define MULTI_CACHE 1

View File

@@ -37,7 +37,7 @@ extern int iop3xx_get_init_atu(void);
* IOP3XX processor registers
*/
#define IOP3XX_PERIPHERAL_PHYS_BASE 0xffffe000
#define IOP3XX_PERIPHERAL_VIRT_BASE 0xfeffe000
#define IOP3XX_PERIPHERAL_VIRT_BASE 0xfedfe000
#define IOP3XX_PERIPHERAL_SIZE 0x00002000
#define IOP3XX_PERIPHERAL_UPPER_PA (IOP3XX_PERIPHERAL_PHYS_BASE +\
IOP3XX_PERIPHERAL_SIZE - 1)

View File

@@ -111,7 +111,7 @@
#define L_PTE_S2_MT_WRITETHROUGH (_AT(pteval_t, 0xa) << 2) /* MemAttr[3:0] */
#define L_PTE_S2_MT_WRITEBACK (_AT(pteval_t, 0xf) << 2) /* MemAttr[3:0] */
#define L_PTE_S2_RDONLY (_AT(pteval_t, 1) << 6) /* HAP[1] */
#define L_PTE_S2_RDWR (_AT(pteval_t, 2) << 6) /* HAP[2:1] */
#define L_PTE_S2_RDWR (_AT(pteval_t, 3) << 6) /* HAP[2:1] */
/*
* Hyp-mode PL2 PTE definitions for LPAE.

View File

@@ -14,7 +14,6 @@
#include <asm/glue.h>
#define TLB_V3_PAGE (1 << 0)
#define TLB_V4_U_PAGE (1 << 1)
#define TLB_V4_D_PAGE (1 << 2)
#define TLB_V4_I_PAGE (1 << 3)
@@ -22,7 +21,6 @@
#define TLB_V6_D_PAGE (1 << 5)
#define TLB_V6_I_PAGE (1 << 6)
#define TLB_V3_FULL (1 << 8)
#define TLB_V4_U_FULL (1 << 9)
#define TLB_V4_D_FULL (1 << 10)
#define TLB_V4_I_FULL (1 << 11)
@@ -52,7 +50,6 @@
* =============
*
* We have the following to choose from:
* v3 - ARMv3
* v4 - ARMv4 without write buffer
* v4wb - ARMv4 with write buffer without I TLB flush entry instruction
* v4wbi - ARMv4 with write buffer with I TLB flush entry instruction
@@ -330,7 +327,6 @@ static inline void local_flush_tlb_all(void)
if (tlb_flag(TLB_WB))
dsb();
tlb_op(TLB_V3_FULL, "c6, c0, 0", zero);
tlb_op(TLB_V4_U_FULL | TLB_V6_U_FULL, "c8, c7, 0", zero);
tlb_op(TLB_V4_D_FULL | TLB_V6_D_FULL, "c8, c6, 0", zero);
tlb_op(TLB_V4_I_FULL | TLB_V6_I_FULL, "c8, c5, 0", zero);
@@ -351,9 +347,8 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
if (tlb_flag(TLB_WB))
dsb();
if (possible_tlb_flags & (TLB_V3_FULL|TLB_V4_U_FULL|TLB_V4_D_FULL|TLB_V4_I_FULL)) {
if (possible_tlb_flags & (TLB_V4_U_FULL|TLB_V4_D_FULL|TLB_V4_I_FULL)) {
if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) {
tlb_op(TLB_V3_FULL, "c6, c0, 0", zero);
tlb_op(TLB_V4_U_FULL, "c8, c7, 0", zero);
tlb_op(TLB_V4_D_FULL, "c8, c6, 0", zero);
tlb_op(TLB_V4_I_FULL, "c8, c5, 0", zero);
@@ -385,9 +380,8 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
if (tlb_flag(TLB_WB))
dsb();
if (possible_tlb_flags & (TLB_V3_PAGE|TLB_V4_U_PAGE|TLB_V4_D_PAGE|TLB_V4_I_PAGE|TLB_V4_I_FULL) &&
if (possible_tlb_flags & (TLB_V4_U_PAGE|TLB_V4_D_PAGE|TLB_V4_I_PAGE|TLB_V4_I_FULL) &&
cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
tlb_op(TLB_V3_PAGE, "c6, c0, 0", uaddr);
tlb_op(TLB_V4_U_PAGE, "c8, c7, 1", uaddr);
tlb_op(TLB_V4_D_PAGE, "c8, c6, 1", uaddr);
tlb_op(TLB_V4_I_PAGE, "c8, c5, 1", uaddr);
@@ -418,7 +412,6 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
if (tlb_flag(TLB_WB))
dsb();
tlb_op(TLB_V3_PAGE, "c6, c0, 0", kaddr);
tlb_op(TLB_V4_U_PAGE, "c8, c7, 1", kaddr);
tlb_op(TLB_V4_D_PAGE, "c8, c6, 1", kaddr);
tlb_op(TLB_V4_I_PAGE, "c8, c5, 1", kaddr);

View File

@@ -1043,7 +1043,7 @@ static int dbg_cpu_pm_notify(struct notifier_block *self, unsigned long action,
return NOTIFY_OK;
}
static struct notifier_block __cpuinitdata dbg_cpu_pm_nb = {
static struct notifier_block dbg_cpu_pm_nb = {
.notifier_call = dbg_cpu_pm_notify,
};

View File

@@ -253,7 +253,10 @@ validate_event(struct pmu_hw_events *hw_events,
struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
struct pmu *leader_pmu = event->group_leader->pmu;
if (event->pmu != leader_pmu || event->state <= PERF_EVENT_STATE_OFF)
if (event->pmu != leader_pmu || event->state < PERF_EVENT_STATE_OFF)
return 1;
if (event->state == PERF_EVENT_STATE_OFF && !event->attr.enable_on_exec)
return 1;
return armpmu->get_event_idx(hw_events, event) >= 0;

View File

@@ -45,12 +45,12 @@ static u32 notrace jiffy_sched_clock_read(void)
static u32 __read_mostly (*read_sched_clock)(void) = jiffy_sched_clock_read;
static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift)
static inline u64 notrace cyc_to_ns(u64 cyc, u32 mult, u32 shift)
{
return (cyc * mult) >> shift;
}
static unsigned long long cyc_to_sched_clock(u32 cyc, u32 mask)
static unsigned long long notrace cyc_to_sched_clock(u32 cyc, u32 mask)
{
u64 epoch_ns;
u32 epoch_cyc;

View File

@@ -56,7 +56,6 @@
#include <asm/virt.h>
#include "atags.h"
#include "tcm.h"
#if defined(CONFIG_FPE_NWFPE) || defined(CONFIG_FPE_FASTFPE)
@@ -798,8 +797,6 @@ void __init setup_arch(char **cmdline_p)
reserve_crashkernel();
tcm_init();
#ifdef CONFIG_MULTI_IRQ_HANDLER
handle_arch_irq = mdesc->handle_irq;
#endif

View File

@@ -17,7 +17,6 @@
#include <asm/mach/map.h>
#include <asm/memory.h>
#include <asm/system_info.h>
#include "tcm.h"
static struct gen_pool *tcm_pool;
static bool dtcm_present;

View File

@@ -201,6 +201,7 @@ int kvm_dev_ioctl_check_extension(long ext)
break;
case KVM_CAP_ARM_SET_DEVICE_ADDR:
r = 1;
break;
case KVM_CAP_NR_VCPUS:
r = num_online_cpus();
break;

View File

@@ -79,11 +79,11 @@ static bool access_dcsw(struct kvm_vcpu *vcpu,
u32 val;
int cpu;
cpu = get_cpu();
if (!p->is_write)
return read_from_write_only(vcpu, p);
cpu = get_cpu();
cpumask_setall(&vcpu->arch.require_dcache_flush);
cpumask_clear_cpu(cpu, &vcpu->arch.require_dcache_flush);

View File

@@ -28,13 +28,11 @@ extern void secondary_startup(void);
*/
void __ref highbank_cpu_die(unsigned int cpu)
{
flush_cache_all();
highbank_set_cpu_jump(cpu, phys_to_virt(0));
flush_cache_louis();
highbank_set_core_pwr();
cpu_do_idle();
/* We should never return from idle */
panic("highbank: cpu %d unexpectedly exit from shutdown\n", cpu);
while (1)
cpu_do_idle();
}

View File

@@ -2714,16 +2714,22 @@ static struct omap_ocp2scp_dev ocp2scp_dev_attr[] = {
{ }
};
static struct omap_hwmod_opt_clk ocp2scp_usb_phy_opt_clks[] = {
{ .role = "48mhz", .clk = "ocp2scp_usb_phy_phy_48m" },
};
/* ocp2scp_usb_phy */
static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
.name = "ocp2scp_usb_phy",
.class = &omap44xx_ocp2scp_hwmod_class,
.clkdm_name = "l3_init_clkdm",
.main_clk = "func_48m_fclk",
/*
* ocp2scp_usb_phy_phy_48m is provided by the OMAP4 PRCM IP
* block as an "optional clock," and normally should never be
* specified as the main_clk for an OMAP IP block. However it
* turns out that this clock is actually the main clock for
* the ocp2scp_usb_phy IP block:
* http://lists.infradead.org/pipermail/linux-arm-kernel/2012-September/119943.html
* So listing ocp2scp_usb_phy_phy_48m as a main_clk here seems
* to be the best workaround.
*/
.main_clk = "ocp2scp_usb_phy_phy_48m",
.prcm = {
.omap4 = {
.clkctrl_offs = OMAP4_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL_OFFSET,
@@ -2732,8 +2738,6 @@ static struct omap_hwmod omap44xx_ocp2scp_usb_phy_hwmod = {
},
},
.dev_attr = ocp2scp_dev_attr,
.opt_clks = ocp2scp_usb_phy_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(ocp2scp_usb_phy_opt_clks),
};
/*

View File

@@ -43,7 +43,7 @@ config CPU_ARM740T
depends on !MMU
select CPU_32v4T
select CPU_ABRT_LV4T
select CPU_CACHE_V3 # although the core is v4t
select CPU_CACHE_V4
select CPU_CP15_MPU
select CPU_PABRT_LEGACY
help
@@ -469,9 +469,6 @@ config CPU_PABRT_V7
bool
# The cache model
config CPU_CACHE_V3
bool
config CPU_CACHE_V4
bool

View File

@@ -33,7 +33,6 @@ obj-$(CONFIG_CPU_PABRT_LEGACY) += pabort-legacy.o
obj-$(CONFIG_CPU_PABRT_V6) += pabort-v6.o
obj-$(CONFIG_CPU_PABRT_V7) += pabort-v7.o
obj-$(CONFIG_CPU_CACHE_V3) += cache-v3.o
obj-$(CONFIG_CPU_CACHE_V4) += cache-v4.o
obj-$(CONFIG_CPU_CACHE_V4WT) += cache-v4wt.o
obj-$(CONFIG_CPU_CACHE_V4WB) += cache-v4wb.o

View File

@@ -343,6 +343,7 @@ void __init feroceon_l2_init(int __l2_wt_override)
outer_cache.inv_range = feroceon_l2_inv_range;
outer_cache.clean_range = feroceon_l2_clean_range;
outer_cache.flush_range = feroceon_l2_flush_range;
outer_cache.inv_all = l2_inv_all;
enable_l2();

View File

@@ -1,137 +0,0 @@
/*
* linux/arch/arm/mm/cache-v3.S
*
* Copyright (C) 1997-2002 Russell king
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/page.h>
#include "proc-macros.S"
/*
* flush_icache_all()
*
* Unconditionally clean and invalidate the entire icache.
*/
ENTRY(v3_flush_icache_all)
mov pc, lr
ENDPROC(v3_flush_icache_all)
/*
* flush_user_cache_all()
*
* Invalidate all cache entries in a particular address
* space.
*
* - mm - mm_struct describing address space
*/
ENTRY(v3_flush_user_cache_all)
/* FALLTHROUGH */
/*
* flush_kern_cache_all()
*
* Clean and invalidate the entire cache.
*/
ENTRY(v3_flush_kern_cache_all)
/* FALLTHROUGH */
/*
* flush_user_cache_range(start, end, flags)
*
* Invalidate a range of cache entries in the specified
* address space.
*
* - start - start address (may not be aligned)
* - end - end address (exclusive, may not be aligned)
* - flags - vma_area_struct flags describing address space
*/
ENTRY(v3_flush_user_cache_range)
mov ip, #0
mcreq p15, 0, ip, c7, c0, 0 @ flush ID cache
mov pc, lr
/*
* coherent_kern_range(start, end)
*
* Ensure coherency between the Icache and the Dcache in the
* region described by start. If you have non-snooping
* Harvard caches, you need to implement this function.
*
* - start - virtual start address
* - end - virtual end address
*/
ENTRY(v3_coherent_kern_range)
/* FALLTHROUGH */
/*
* coherent_user_range(start, end)
*
* Ensure coherency between the Icache and the Dcache in the
* region described by start. If you have non-snooping
* Harvard caches, you need to implement this function.
*
* - start - virtual start address
* - end - virtual end address
*/
ENTRY(v3_coherent_user_range)
mov r0, #0
mov pc, lr
/*
* flush_kern_dcache_area(void *page, size_t size)
*
* Ensure no D cache aliasing occurs, either with itself or
* the I cache
*
* - addr - kernel address
* - size - region size
*/
ENTRY(v3_flush_kern_dcache_area)
/* FALLTHROUGH */
/*
* dma_flush_range(start, end)
*
* Clean and invalidate the specified virtual address range.
*
* - start - virtual start address
* - end - virtual end address
*/
ENTRY(v3_dma_flush_range)
mov r0, #0
mcr p15, 0, r0, c7, c0, 0 @ flush ID cache
mov pc, lr
/*
* dma_unmap_area(start, size, dir)
* - start - kernel virtual start address
* - size - size of region
* - dir - DMA direction
*/
ENTRY(v3_dma_unmap_area)
teq r2, #DMA_TO_DEVICE
bne v3_dma_flush_range
/* FALLTHROUGH */
/*
* dma_map_area(start, size, dir)
* - start - kernel virtual start address
* - size - size of region
* - dir - DMA direction
*/
ENTRY(v3_dma_map_area)
mov pc, lr
ENDPROC(v3_dma_unmap_area)
ENDPROC(v3_dma_map_area)
.globl v3_flush_kern_cache_louis
.equ v3_flush_kern_cache_louis, v3_flush_kern_cache_all
__INITDATA
@ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S)
define_cache_functions v3

View File

@@ -58,7 +58,7 @@ ENTRY(v4_flush_kern_cache_all)
ENTRY(v4_flush_user_cache_range)
#ifdef CONFIG_CPU_CP15
mov ip, #0
mcreq p15, 0, ip, c7, c7, 0 @ flush ID cache
mcr p15, 0, ip, c7, c7, 0 @ flush ID cache
mov pc, lr
#else
/* FALLTHROUGH */

View File

@@ -34,6 +34,7 @@
#include <asm/mach/pci.h>
#include "mm.h"
#include "tcm.h"
/*
* empty_zero_page is a special page that is used for
@@ -1277,6 +1278,7 @@ void __init paging_init(struct machine_desc *mdesc)
dma_contiguous_remap();
devicemaps_init(mdesc);
kmap_init();
tcm_init();
top_pmd = pmd_off_k(0xffff0000);

View File

@@ -77,24 +77,27 @@ __arm740_setup:
mcr p15, 0, r0, c6, c0 @ set area 0, default
ldr r0, =(CONFIG_DRAM_BASE & 0xFFFFF000) @ base[31:12] of RAM
ldr r1, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB)
mov r2, #10 @ 11 is the minimum (4KB)
1: add r2, r2, #1 @ area size *= 2
mov r1, r1, lsr #1
ldr r3, =(CONFIG_DRAM_SIZE >> 12) @ size of RAM (must be >= 4KB)
mov r4, #10 @ 11 is the minimum (4KB)
1: add r4, r4, #1 @ area size *= 2
movs r3, r3, lsr #1
bne 1b @ count not zero r-shift
orr r0, r0, r2, lsl #1 @ the area register value
orr r0, r0, r4, lsl #1 @ the area register value
orr r0, r0, #1 @ set enable bit
mcr p15, 0, r0, c6, c1 @ set area 1, RAM
ldr r0, =(CONFIG_FLASH_MEM_BASE & 0xFFFFF000) @ base[31:12] of FLASH
ldr r1, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB)
mov r2, #10 @ 11 is the minimum (4KB)
1: add r2, r2, #1 @ area size *= 2
mov r1, r1, lsr #1
ldr r3, =(CONFIG_FLASH_SIZE >> 12) @ size of FLASH (must be >= 4KB)
cmp r3, #0
moveq r0, #0
beq 2f
mov r4, #10 @ 11 is the minimum (4KB)
1: add r4, r4, #1 @ area size *= 2
movs r3, r3, lsr #1
bne 1b @ count not zero r-shift
orr r0, r0, r2, lsl #1 @ the area register value
orr r0, r0, r4, lsl #1 @ the area register value
orr r0, r0, #1 @ set enable bit
mcr p15, 0, r0, c6, c2 @ set area 2, ROM/FLASH
2: mcr p15, 0, r0, c6, c2 @ set area 2, ROM/FLASH
mov r0, #0x06
mcr p15, 0, r0, c2, c0 @ Region 1&2 cacheable
@@ -137,13 +140,14 @@ __arm740_proc_info:
.long 0x41807400
.long 0xfffffff0
.long 0
.long 0
b __arm740_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT
.long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_26BIT
.long cpu_arm740_name
.long arm740_processor_functions
.long 0
.long 0
.long v3_cache_fns @ cache model
.long v4_cache_fns @ cache model
.size __arm740_proc_info, . - __arm740_proc_info

View File

@@ -387,7 +387,7 @@ ENTRY(cpu_arm920_set_pte_ext)
/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
.globl cpu_arm920_suspend_size
.equ cpu_arm920_suspend_size, 4 * 3
#ifdef CONFIG_PM_SLEEP
#ifdef CONFIG_ARM_CPU_SUSPEND
ENTRY(cpu_arm920_do_suspend)
stmfd sp!, {r4 - r6, lr}
mrc p15, 0, r4, c13, c0, 0 @ PID

View File

@@ -402,7 +402,7 @@ ENTRY(cpu_arm926_set_pte_ext)
/* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
.globl cpu_arm926_suspend_size
.equ cpu_arm926_suspend_size, 4 * 3
#ifdef CONFIG_PM_SLEEP
#ifdef CONFIG_ARM_CPU_SUSPEND
ENTRY(cpu_arm926_do_suspend)
stmfd sp!, {r4 - r6, lr}
mrc p15, 0, r4, c13, c0, 0 @ PID

View File

@@ -350,7 +350,7 @@ ENTRY(cpu_mohawk_set_pte_ext)
.globl cpu_mohawk_suspend_size
.equ cpu_mohawk_suspend_size, 4 * 6
#ifdef CONFIG_PM_SLEEP
#ifdef CONFIG_ARM_CPU_SUSPEND
ENTRY(cpu_mohawk_do_suspend)
stmfd sp!, {r4 - r9, lr}
mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode

View File

@@ -172,7 +172,7 @@ ENTRY(cpu_sa1100_set_pte_ext)
.globl cpu_sa1100_suspend_size
.equ cpu_sa1100_suspend_size, 4 * 3
#ifdef CONFIG_PM_SLEEP
#ifdef CONFIG_ARM_CPU_SUSPEND
ENTRY(cpu_sa1100_do_suspend)
stmfd sp!, {r4 - r6, lr}
mrc p15, 0, r4, c3, c0, 0 @ domain ID

View File

@@ -17,7 +17,9 @@
#ifndef MULTI_CPU
EXPORT_SYMBOL(cpu_dcache_clean_area);
#ifdef CONFIG_MMU
EXPORT_SYMBOL(cpu_set_pte_ext);
#endif
#else
EXPORT_SYMBOL(processor);
#endif

View File

@@ -138,7 +138,7 @@ ENTRY(cpu_v6_set_pte_ext)
/* Suspend/resume support: taken from arch/arm/mach-s3c64xx/sleep.S */
.globl cpu_v6_suspend_size
.equ cpu_v6_suspend_size, 4 * 6
#ifdef CONFIG_PM_SLEEP
#ifdef CONFIG_ARM_CPU_SUSPEND
ENTRY(cpu_v6_do_suspend)
stmfd sp!, {r4 - r9, lr}
mrc p15, 0, r4, c13, c0, 0 @ FCSE/PID

View File

@@ -413,7 +413,7 @@ ENTRY(cpu_xsc3_set_pte_ext)
.globl cpu_xsc3_suspend_size
.equ cpu_xsc3_suspend_size, 4 * 6
#ifdef CONFIG_PM_SLEEP
#ifdef CONFIG_ARM_CPU_SUSPEND
ENTRY(cpu_xsc3_do_suspend)
stmfd sp!, {r4 - r9, lr}
mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode

View File

@@ -528,7 +528,7 @@ ENTRY(cpu_xscale_set_pte_ext)
.globl cpu_xscale_suspend_size
.equ cpu_xscale_suspend_size, 4 * 6
#ifdef CONFIG_PM_SLEEP
#ifdef CONFIG_ARM_CPU_SUSPEND
ENTRY(cpu_xscale_do_suspend)
stmfd sp!, {r4 - r9, lr}
mrc p14, 0, r4, c6, c0, 0 @ clock configuration, for turbo mode

View File

@@ -165,6 +165,10 @@ BUILDIO_IOPORT(l, u32)
#define readw_be __raw_readw
#define readl_be __raw_readl
#define writeb_relaxed writeb
#define writew_relaxed writew
#define writel_relaxed writel
#define writeb_be __raw_writeb
#define writew_be __raw_writew
#define writel_be __raw_writel

View File

@@ -31,7 +31,7 @@
#define PAGE_SHIFT 16
#endif
#define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE - 1))
#define PAGE_MASK (~((1 << PAGE_SHIFT) - 1))
#ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
#define HPAGE_SHIFT (PAGE_SHIFT + PAGE_SHIFT - 3)

View File

@@ -65,8 +65,10 @@ ifndef CONFIG_FUNCTION_TRACER
endif
# Use long jumps instead of long branches (needed if your linker fails to
# link a too big vmlinux executable)
cflags-$(CONFIG_MLONGCALLS) += -mlong-calls
# link a too big vmlinux executable). Not enabled for building modules.
ifdef CONFIG_MLONGCALLS
KBUILD_CFLAGS_KERNEL += -mlong-calls
endif
# select which processor to optimise for
cflags-$(CONFIG_PA7100) += -march=1.1 -mschedule=7100

View File

@@ -140,7 +140,10 @@ static inline void *kmap(struct page *page)
return page_address(page);
}
#define kunmap(page) kunmap_parisc(page_address(page))
static inline void kunmap(struct page *page)
{
kunmap_parisc(page_address(page));
}
static inline void *kmap_atomic(struct page *page)
{

View File

@@ -16,6 +16,8 @@
#include <asm/processor.h>
#include <asm/cache.h>
extern spinlock_t pa_dbit_lock;
/*
* kern_addr_valid(ADDR) tests if ADDR is pointing to valid kernel
* memory. For the return value to be meaningful, ADDR must be >=
@@ -44,8 +46,11 @@ extern void purge_tlb_entries(struct mm_struct *, unsigned long);
#define set_pte_at(mm, addr, ptep, pteval) \
do { \
unsigned long flags; \
spin_lock_irqsave(&pa_dbit_lock, flags); \
set_pte(ptep, pteval); \
purge_tlb_entries(mm, addr); \
spin_unlock_irqrestore(&pa_dbit_lock, flags); \
} while (0)
#endif /* !__ASSEMBLY__ */
@@ -435,48 +440,46 @@ extern void update_mmu_cache(struct vm_area_struct *, unsigned long, pte_t *);
static inline int ptep_test_and_clear_young(struct vm_area_struct *vma, unsigned long addr, pte_t *ptep)
{
#ifdef CONFIG_SMP
pte_t pte;
unsigned long flags;
if (!pte_young(*ptep))
return 0;
return test_and_clear_bit(xlate_pabit(_PAGE_ACCESSED_BIT), &pte_val(*ptep));
#else
pte_t pte = *ptep;
if (!pte_young(pte))
return 0;
set_pte_at(vma->vm_mm, addr, ptep, pte_mkold(pte));
return 1;
#endif
}
extern spinlock_t pa_dbit_lock;
spin_lock_irqsave(&pa_dbit_lock, flags);
pte = *ptep;
if (!pte_young(pte)) {
spin_unlock_irqrestore(&pa_dbit_lock, flags);
return 0;
}
set_pte(ptep, pte_mkold(pte));
purge_tlb_entries(vma->vm_mm, addr);
spin_unlock_irqrestore(&pa_dbit_lock, flags);
return 1;
}
struct mm_struct;
static inline pte_t ptep_get_and_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
pte_t old_pte;
unsigned long flags;
spin_lock(&pa_dbit_lock);
spin_lock_irqsave(&pa_dbit_lock, flags);
old_pte = *ptep;
pte_clear(mm,addr,ptep);
spin_unlock(&pa_dbit_lock);
purge_tlb_entries(mm, addr);
spin_unlock_irqrestore(&pa_dbit_lock, flags);
return old_pte;
}
static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
#ifdef CONFIG_SMP
unsigned long new, old;
do {
old = pte_val(*ptep);
new = pte_val(pte_wrprotect(__pte (old)));
} while (cmpxchg((unsigned long *) ptep, old, new) != old);
unsigned long flags;
spin_lock_irqsave(&pa_dbit_lock, flags);
set_pte(ptep, pte_wrprotect(*ptep));
purge_tlb_entries(mm, addr);
#else
pte_t old_pte = *ptep;
set_pte_at(mm, addr, ptep, pte_wrprotect(old_pte));
#endif
spin_unlock_irqrestore(&pa_dbit_lock, flags);
}
#define pte_same(A,B) (pte_val(A) == pte_val(B))

View File

@@ -181,30 +181,24 @@ struct exception_data {
#if !defined(CONFIG_64BIT)
#define __put_kernel_asm64(__val,ptr) do { \
u64 __val64 = (u64)(__val); \
u32 hi = (__val64) >> 32; \
u32 lo = (__val64) & 0xffffffff; \
__asm__ __volatile__ ( \
"\n1:\tstw %2,0(%1)" \
"\n2:\tstw %3,4(%1)\n\t" \
"\n2:\tstw %R2,4(%1)\n\t" \
ASM_EXCEPTIONTABLE_ENTRY(1b,fixup_put_user_skip_2)\
ASM_EXCEPTIONTABLE_ENTRY(2b,fixup_put_user_skip_1)\
: "=r"(__pu_err) \
: "r"(ptr), "r"(hi), "r"(lo), "0"(__pu_err) \
: "r"(ptr), "r"(__val), "0"(__pu_err) \
: "r1"); \
} while (0)
#define __put_user_asm64(__val,ptr) do { \
u64 __val64 = (u64)(__val); \
u32 hi = (__val64) >> 32; \
u32 lo = (__val64) & 0xffffffff; \
__asm__ __volatile__ ( \
"\n1:\tstw %2,0(%%sr3,%1)" \
"\n2:\tstw %3,4(%%sr3,%1)\n\t" \
"\n2:\tstw %R2,4(%%sr3,%1)\n\t" \
ASM_EXCEPTIONTABLE_ENTRY(1b,fixup_put_user_skip_2)\
ASM_EXCEPTIONTABLE_ENTRY(2b,fixup_put_user_skip_1)\
: "=r"(__pu_err) \
: "r"(ptr), "r"(hi), "r"(lo), "0"(__pu_err) \
: "r"(ptr), "r"(__val), "0"(__pu_err) \
: "r1"); \
} while (0)

View File

@@ -421,14 +421,11 @@ void purge_tlb_entries(struct mm_struct *mm, unsigned long addr)
/* Note: purge_tlb_entries can be called at startup with
no context. */
/* Disable preemption while we play with %sr1. */
preempt_disable();
mtsp(mm->context, 1);
purge_tlb_start(flags);
mtsp(mm->context, 1);
pdtlb(addr);
pitlb(addr);
purge_tlb_end(flags);
preempt_enable();
}
EXPORT_SYMBOL(purge_tlb_entries);

View File

@@ -120,11 +120,13 @@ extern void __ashrdi3(void);
extern void __ashldi3(void);
extern void __lshrdi3(void);
extern void __muldi3(void);
extern void __ucmpdi2(void);
EXPORT_SYMBOL(__ashrdi3);
EXPORT_SYMBOL(__ashldi3);
EXPORT_SYMBOL(__lshrdi3);
EXPORT_SYMBOL(__muldi3);
EXPORT_SYMBOL(__ucmpdi2);
asmlinkage void * __canonicalize_funcptr_for_compare(void *);
EXPORT_SYMBOL(__canonicalize_funcptr_for_compare);

View File

@@ -2,6 +2,7 @@
# Makefile for parisc-specific library files
#
lib-y := lusercopy.o bitops.o checksum.o io.o memset.o fixup.o memcpy.o
lib-y := lusercopy.o bitops.o checksum.o io.o memset.o fixup.o memcpy.o \
ucmpdi2.o
obj-y := iomap.o

25
arch/parisc/lib/ucmpdi2.c Normal file
View File

@@ -0,0 +1,25 @@
#include <linux/module.h>
union ull_union {
unsigned long long ull;
struct {
unsigned int high;
unsigned int low;
} ui;
};
int __ucmpdi2(unsigned long long a, unsigned long long b)
{
union ull_union au = {.ull = a};
union ull_union bu = {.ull = b};
if (au.ui.high < bu.ui.high)
return 0;
else if (au.ui.high > bu.ui.high)
return 2;
if (au.ui.low < bu.ui.low)
return 0;
else if (au.ui.low > bu.ui.low)
return 2;
return 1;
}

View File

@@ -304,7 +304,7 @@ syscall_exit_work:
subi r12,r12,TI_FLAGS
4: /* Anything else left to do? */
SET_DEFAULT_THREAD_PPR(r3, r9) /* Set thread.ppr = 3 */
SET_DEFAULT_THREAD_PPR(r3, r10) /* Set thread.ppr = 3 */
andi. r0,r9,(_TIF_SYSCALL_T_OR_A|_TIF_SINGLESTEP)
beq .ret_from_except_lite
@@ -657,7 +657,7 @@ resume_kernel:
/* Clear _TIF_EMULATE_STACK_STORE flag */
lis r11,_TIF_EMULATE_STACK_STORE@h
addi r5,r9,TI_FLAGS
ldarx r4,0,r5
0: ldarx r4,0,r5
andc r4,r4,r11
stdcx. r4,0,r5
bne- 0b

View File

@@ -555,10 +555,12 @@ static inline void tm_recheckpoint_new_task(struct task_struct *new)
new->thread.regs->msr |=
(MSR_FP | new->thread.fpexc_mode);
}
#ifdef CONFIG_ALTIVEC
if (msr & MSR_VEC) {
do_load_up_transact_altivec(&new->thread);
new->thread.regs->msr |= MSR_VEC;
}
#endif
/* We may as well turn on VSX too since all the state is restored now */
if (msr & MSR_VSX)
new->thread.regs->msr |= MSR_VSX;

View File

@@ -866,10 +866,12 @@ static long restore_tm_user_regs(struct pt_regs *regs,
do_load_up_transact_fpu(&current->thread);
regs->msr |= (MSR_FP | current->thread.fpexc_mode);
}
#ifdef CONFIG_ALTIVEC
if (msr & MSR_VEC) {
do_load_up_transact_altivec(&current->thread);
regs->msr |= MSR_VEC;
}
#endif
return 0;
}

View File

@@ -522,10 +522,12 @@ static long restore_tm_sigcontexts(struct pt_regs *regs,
do_load_up_transact_fpu(&current->thread);
regs->msr |= (MSR_FP | current->thread.fpexc_mode);
}
#ifdef CONFIG_ALTIVEC
if (msr & MSR_VEC) {
do_load_up_transact_altivec(&current->thread);
regs->msr |= MSR_VEC;
}
#endif
return err;
}

View File

@@ -309,6 +309,7 @@ _GLOBAL(tm_recheckpoint)
or r5, r6, r5 /* Set MSR.FP+.VSX/.VEC */
mtmsr r5
#ifdef CONFIG_ALTIVEC
/* FP and VEC registers: These are recheckpointed from thread.fpr[]
* and thread.vr[] respectively. The thread.transact_fpr[] version
* is more modern, and will be loaded subsequently by any FPUnavailable
@@ -323,6 +324,7 @@ _GLOBAL(tm_recheckpoint)
REST_32VRS(0, r5, r3) /* r5 scratch, r3 THREAD ptr */
ld r5, THREAD_VRSAVE(r3)
mtspr SPRN_VRSAVE, r5
#endif
dont_restore_vec:
andi. r0, r4, MSR_FP

View File

@@ -26,17 +26,20 @@
#define E500_PID_NUM 3
#define E500_TLB_NUM 2
#define E500_TLB_VALID 1
#define E500_TLB_BITMAP 2
/* entry is mapped somewhere in host TLB */
#define E500_TLB_VALID (1 << 0)
/* TLB1 entry is mapped by host TLB1, tracked by bitmaps */
#define E500_TLB_BITMAP (1 << 1)
/* TLB1 entry is mapped by host TLB0 */
#define E500_TLB_TLB0 (1 << 2)
struct tlbe_ref {
pfn_t pfn;
unsigned int flags; /* E500_TLB_* */
pfn_t pfn; /* valid only for TLB0, except briefly */
unsigned int flags; /* E500_TLB_* */
};
struct tlbe_priv {
struct tlbe_ref ref; /* TLB0 only -- TLB1 uses tlb_refs */
struct tlbe_ref ref;
};
#ifdef CONFIG_KVM_E500V2
@@ -63,17 +66,6 @@ struct kvmppc_vcpu_e500 {
unsigned int gtlb_nv[E500_TLB_NUM];
/*
* information associated with each host TLB entry --
* TLB1 only for now. If/when guest TLB1 entries can be
* mapped with host TLB0, this will be used for that too.
*
* We don't want to use this for guest TLB0 because then we'd
* have the overhead of doing the translation again even if
* the entry is still in the guest TLB (e.g. we swapped out
* and back, and our host TLB entries got evicted).
*/
struct tlbe_ref *tlb_refs[E500_TLB_NUM];
unsigned int host_tlb1_nv;
u32 svr;

View File

@@ -193,8 +193,11 @@ void inval_gtlbe_on_host(struct kvmppc_vcpu_e500 *vcpu_e500, int tlbsel,
struct tlbe_ref *ref = &vcpu_e500->gtlb_priv[tlbsel][esel].ref;
/* Don't bother with unmapped entries */
if (!(ref->flags & E500_TLB_VALID))
return;
if (!(ref->flags & E500_TLB_VALID)) {
WARN(ref->flags & (E500_TLB_BITMAP | E500_TLB_TLB0),
"%s: flags %x\n", __func__, ref->flags);
WARN_ON(tlbsel == 1 && vcpu_e500->g2h_tlb1_map[esel]);
}
if (tlbsel == 1 && ref->flags & E500_TLB_BITMAP) {
u64 tmp = vcpu_e500->g2h_tlb1_map[esel];
@@ -248,7 +251,7 @@ static inline void kvmppc_e500_ref_setup(struct tlbe_ref *ref,
pfn_t pfn)
{
ref->pfn = pfn;
ref->flags = E500_TLB_VALID;
ref->flags |= E500_TLB_VALID;
if (tlbe_is_writable(gtlbe))
kvm_set_pfn_dirty(pfn);
@@ -257,6 +260,7 @@ static inline void kvmppc_e500_ref_setup(struct tlbe_ref *ref,
static inline void kvmppc_e500_ref_release(struct tlbe_ref *ref)
{
if (ref->flags & E500_TLB_VALID) {
/* FIXME: don't log bogus pfn for TLB1 */
trace_kvm_booke206_ref_release(ref->pfn, ref->flags);
ref->flags = 0;
}
@@ -274,36 +278,23 @@ static void clear_tlb1_bitmap(struct kvmppc_vcpu_e500 *vcpu_e500)
static void clear_tlb_privs(struct kvmppc_vcpu_e500 *vcpu_e500)
{
int tlbsel = 0;
int tlbsel;
int i;
for (i = 0; i < vcpu_e500->gtlb_params[tlbsel].entries; i++) {
struct tlbe_ref *ref =
&vcpu_e500->gtlb_priv[tlbsel][i].ref;
kvmppc_e500_ref_release(ref);
for (tlbsel = 0; tlbsel <= 1; tlbsel++) {
for (i = 0; i < vcpu_e500->gtlb_params[tlbsel].entries; i++) {
struct tlbe_ref *ref =
&vcpu_e500->gtlb_priv[tlbsel][i].ref;
kvmppc_e500_ref_release(ref);
}
}
}
static void clear_tlb_refs(struct kvmppc_vcpu_e500 *vcpu_e500)
{
int stlbsel = 1;
int i;
kvmppc_e500_tlbil_all(vcpu_e500);
for (i = 0; i < host_tlb_params[stlbsel].entries; i++) {
struct tlbe_ref *ref =
&vcpu_e500->tlb_refs[stlbsel][i];
kvmppc_e500_ref_release(ref);
}
clear_tlb_privs(vcpu_e500);
}
void kvmppc_core_flush_tlb(struct kvm_vcpu *vcpu)
{
struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);
clear_tlb_refs(vcpu_e500);
kvmppc_e500_tlbil_all(vcpu_e500);
clear_tlb_privs(vcpu_e500);
clear_tlb1_bitmap(vcpu_e500);
}
@@ -458,8 +449,6 @@ static inline int kvmppc_e500_shadow_map(struct kvmppc_vcpu_e500 *vcpu_e500,
gvaddr &= ~((tsize_pages << PAGE_SHIFT) - 1);
}
/* Drop old ref and setup new one. */
kvmppc_e500_ref_release(ref);
kvmppc_e500_ref_setup(ref, gtlbe, pfn);
kvmppc_e500_setup_stlbe(&vcpu_e500->vcpu, gtlbe, tsize,
@@ -507,14 +496,15 @@ static int kvmppc_e500_tlb1_map_tlb1(struct kvmppc_vcpu_e500 *vcpu_e500,
if (unlikely(vcpu_e500->host_tlb1_nv >= tlb1_max_shadow_size()))
vcpu_e500->host_tlb1_nv = 0;
vcpu_e500->tlb_refs[1][sesel] = *ref;
vcpu_e500->g2h_tlb1_map[esel] |= (u64)1 << sesel;
vcpu_e500->gtlb_priv[1][esel].ref.flags |= E500_TLB_BITMAP;
if (vcpu_e500->h2g_tlb1_rmap[sesel]) {
unsigned int idx = vcpu_e500->h2g_tlb1_rmap[sesel];
unsigned int idx = vcpu_e500->h2g_tlb1_rmap[sesel] - 1;
vcpu_e500->g2h_tlb1_map[idx] &= ~(1ULL << sesel);
}
vcpu_e500->h2g_tlb1_rmap[sesel] = esel;
vcpu_e500->gtlb_priv[1][esel].ref.flags |= E500_TLB_BITMAP;
vcpu_e500->g2h_tlb1_map[esel] |= (u64)1 << sesel;
vcpu_e500->h2g_tlb1_rmap[sesel] = esel + 1;
WARN_ON(!(ref->flags & E500_TLB_VALID));
return sesel;
}
@@ -526,13 +516,12 @@ static int kvmppc_e500_tlb1_map(struct kvmppc_vcpu_e500 *vcpu_e500,
u64 gvaddr, gfn_t gfn, struct kvm_book3e_206_tlb_entry *gtlbe,
struct kvm_book3e_206_tlb_entry *stlbe, int esel)
{
struct tlbe_ref ref;
struct tlbe_ref *ref = &vcpu_e500->gtlb_priv[1][esel].ref;
int sesel;
int r;
ref.flags = 0;
r = kvmppc_e500_shadow_map(vcpu_e500, gvaddr, gfn, gtlbe, 1, stlbe,
&ref);
ref);
if (r)
return r;
@@ -544,7 +533,7 @@ static int kvmppc_e500_tlb1_map(struct kvmppc_vcpu_e500 *vcpu_e500,
}
/* Otherwise map into TLB1 */
sesel = kvmppc_e500_tlb1_map_tlb1(vcpu_e500, &ref, esel);
sesel = kvmppc_e500_tlb1_map_tlb1(vcpu_e500, ref, esel);
write_stlbe(vcpu_e500, gtlbe, stlbe, 1, sesel);
return 0;
@@ -565,7 +554,7 @@ void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 eaddr, gpa_t gpaddr,
case 0:
priv = &vcpu_e500->gtlb_priv[tlbsel][esel];
/* Triggers after clear_tlb_refs or on initial mapping */
/* Triggers after clear_tlb_privs or on initial mapping */
if (!(priv->ref.flags & E500_TLB_VALID)) {
kvmppc_e500_tlb0_map(vcpu_e500, esel, &stlbe);
} else {
@@ -665,35 +654,16 @@ int e500_mmu_host_init(struct kvmppc_vcpu_e500 *vcpu_e500)
host_tlb_params[0].entries / host_tlb_params[0].ways;
host_tlb_params[1].sets = 1;
vcpu_e500->tlb_refs[0] =
kzalloc(sizeof(struct tlbe_ref) * host_tlb_params[0].entries,
GFP_KERNEL);
if (!vcpu_e500->tlb_refs[0])
goto err;
vcpu_e500->tlb_refs[1] =
kzalloc(sizeof(struct tlbe_ref) * host_tlb_params[1].entries,
GFP_KERNEL);
if (!vcpu_e500->tlb_refs[1])
goto err;
vcpu_e500->h2g_tlb1_rmap = kzalloc(sizeof(unsigned int) *
host_tlb_params[1].entries,
GFP_KERNEL);
if (!vcpu_e500->h2g_tlb1_rmap)
goto err;
return -EINVAL;
return 0;
err:
kfree(vcpu_e500->tlb_refs[0]);
kfree(vcpu_e500->tlb_refs[1]);
return -EINVAL;
}
void e500_mmu_host_uninit(struct kvmppc_vcpu_e500 *vcpu_e500)
{
kfree(vcpu_e500->h2g_tlb1_rmap);
kfree(vcpu_e500->tlb_refs[0]);
kfree(vcpu_e500->tlb_refs[1]);
}

View File

@@ -108,6 +108,8 @@ void kvmppc_mmu_msr_notify(struct kvm_vcpu *vcpu, u32 old_msr)
{
}
static DEFINE_PER_CPU(struct kvm_vcpu *, last_vcpu_on_cpu);
void kvmppc_core_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
{
struct kvmppc_vcpu_e500 *vcpu_e500 = to_e500(vcpu);
@@ -136,8 +138,11 @@ void kvmppc_core_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
mtspr(SPRN_GDEAR, vcpu->arch.shared->dar);
mtspr(SPRN_GESR, vcpu->arch.shared->esr);
if (vcpu->arch.oldpir != mfspr(SPRN_PIR))
if (vcpu->arch.oldpir != mfspr(SPRN_PIR) ||
__get_cpu_var(last_vcpu_on_cpu) != vcpu) {
kvmppc_e500_tlbil_all(vcpu_e500);
__get_cpu_var(last_vcpu_on_cpu) = vcpu;
}
kvmppc_load_guest_fp(vcpu);
}

View File

@@ -50,10 +50,6 @@ void unxlate_dev_mem_ptr(unsigned long phys, void *addr);
#define ioremap_nocache(addr, size) ioremap(addr, size)
#define ioremap_wc ioremap_nocache
/* TODO: s390 cannot support io_remap_pfn_range... */
#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
remap_pfn_range(vma, vaddr, pfn, size, prot)
static inline void __iomem *ioremap(unsigned long offset, unsigned long size)
{
return (void __iomem *) offset;

View File

@@ -57,6 +57,10 @@ extern unsigned long zero_page_mask;
(((unsigned long)(vaddr)) &zero_page_mask))))
#define __HAVE_COLOR_ZERO_PAGE
/* TODO: s390 cannot support io_remap_pfn_range... */
#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
remap_pfn_range(vma, vaddr, pfn, size, prot)
#endif /* !__ASSEMBLY__ */
/*

View File

@@ -2,11 +2,16 @@
generic-y += clkdev.h
generic-y += cputime.h
generic-y += div64.h
generic-y += emergency-restart.h
generic-y += exec.h
generic-y += local64.h
generic-y += mutex.h
generic-y += irq_regs.h
generic-y += local.h
generic-y += module.h
generic-y += serial.h
generic-y += trace_clock.h
generic-y += types.h
generic-y += word-at-a-time.h

View File

@@ -1,6 +0,0 @@
#ifndef __SPARC_CPUTIME_H
#define __SPARC_CPUTIME_H
#include <asm-generic/cputime.h>
#endif /* __SPARC_CPUTIME_H */

View File

@@ -1,6 +0,0 @@
#ifndef _ASM_EMERGENCY_RESTART_H
#define _ASM_EMERGENCY_RESTART_H
#include <asm-generic/emergency-restart.h>
#endif /* _ASM_EMERGENCY_RESTART_H */

View File

@@ -1,9 +0,0 @@
/*
* Pull in the generic implementation for the mutex fastpath.
*
* TODO: implement optimized primitives instead, or leave the generic
* implementation in place, or pick the atomic_xchg() based generic
* implementation. (see asm-generic/mutex-xchg.h for details)
*/
#include <asm-generic/mutex-dec.h>

View File

@@ -915,6 +915,7 @@ static inline int io_remap_pfn_range(struct vm_area_struct *vma,
return remap_pfn_range(vma, from, phys_base >> PAGE_SHIFT, size, prot);
}
#include <asm/tlbflush.h>
#include <asm-generic/pgtable.h>
/* We provide our own get_unmapped_area to cope with VA holes and

View File

@@ -1,6 +0,0 @@
#ifndef __SPARC_SERIAL_H
#define __SPARC_SERIAL_H
#define BASE_BAUD ( 1843200 / 16 )
#endif /* __SPARC_SERIAL_H */

View File

@@ -36,7 +36,6 @@ typedef void (*smpfunc_t)(unsigned long, unsigned long, unsigned long,
unsigned long, unsigned long);
void cpu_panic(void);
extern void smp4m_irq_rotate(int cpu);
/*
* General functions that each host system must provide.
@@ -46,7 +45,6 @@ void sun4m_init_smp(void);
void sun4d_init_smp(void);
void smp_callin(void);
void smp_boot_cpus(void);
void smp_store_cpu_info(int);
void smp_resched_interrupt(void);
@@ -107,9 +105,6 @@ extern int hard_smp_processor_id(void);
#define raw_smp_processor_id() (current_thread_info()->cpu)
#define prof_multiplier(__cpu) cpu_data(__cpu).multiplier
#define prof_counter(__cpu) cpu_data(__cpu).counter
void smp_setup_cpu_possible_map(void);
#endif /* !(__ASSEMBLY__) */

View File

@@ -18,8 +18,7 @@ do { \
* and 2 stores in this critical code path. -DaveM
*/
#define switch_to(prev, next, last) \
do { flush_tlb_pending(); \
save_and_clear_fpu(); \
do { save_and_clear_fpu(); \
/* If you are tempted to conditionalize the following */ \
/* so that ASI is only written if it changes, think again. */ \
__asm__ __volatile__("wr %%g0, %0, %%asi" \

View File

@@ -11,24 +11,40 @@
struct tlb_batch {
struct mm_struct *mm;
unsigned long tlb_nr;
unsigned long active;
unsigned long vaddrs[TLB_BATCH_NR];
};
extern void flush_tsb_kernel_range(unsigned long start, unsigned long end);
extern void flush_tsb_user(struct tlb_batch *tb);
extern void flush_tsb_user_page(struct mm_struct *mm, unsigned long vaddr);
/* TLB flush operations. */
extern void flush_tlb_pending(void);
static inline void flush_tlb_mm(struct mm_struct *mm)
{
}
#define flush_tlb_range(vma,start,end) \
do { (void)(start); flush_tlb_pending(); } while (0)
#define flush_tlb_page(vma,addr) flush_tlb_pending()
#define flush_tlb_mm(mm) flush_tlb_pending()
static inline void flush_tlb_page(struct vm_area_struct *vma,
unsigned long vmaddr)
{
}
static inline void flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
}
#define __HAVE_ARCH_ENTER_LAZY_MMU_MODE
extern void flush_tlb_pending(void);
extern void arch_enter_lazy_mmu_mode(void);
extern void arch_leave_lazy_mmu_mode(void);
#define arch_flush_lazy_mmu_mode() do {} while (0)
/* Local cpu only. */
extern void __flush_tlb_all(void);
extern void __flush_tlb_page(unsigned long context, unsigned long vaddr);
extern void __flush_tlb_kernel_range(unsigned long start, unsigned long end);
#ifndef CONFIG_SMP
@@ -38,15 +54,24 @@ do { flush_tsb_kernel_range(start,end); \
__flush_tlb_kernel_range(start,end); \
} while (0)
static inline void global_flush_tlb_page(struct mm_struct *mm, unsigned long vaddr)
{
__flush_tlb_page(CTX_HWBITS(mm->context), vaddr);
}
#else /* CONFIG_SMP */
extern void smp_flush_tlb_kernel_range(unsigned long start, unsigned long end);
extern void smp_flush_tlb_page(struct mm_struct *mm, unsigned long vaddr);
#define flush_tlb_kernel_range(start, end) \
do { flush_tsb_kernel_range(start,end); \
smp_flush_tlb_kernel_range(start, end); \
} while (0)
#define global_flush_tlb_page(mm, vaddr) \
smp_flush_tlb_page(mm, vaddr)
#endif /* ! CONFIG_SMP */
#endif /* _SPARC64_TLBFLUSH_H */

View File

@@ -44,7 +44,6 @@ header-y += swab.h
header-y += termbits.h
header-y += termios.h
header-y += traps.h
header-y += types.h
header-y += uctx.h
header-y += unistd.h
header-y += utrap.h

View File

@@ -1,17 +0,0 @@
#ifndef _SPARC_TYPES_H
#define _SPARC_TYPES_H
/*
* This file is never included by application software unless
* explicitly requested (e.g., via linux/types.h) in which case the
* application is Linux specific so (user-) name space pollution is
* not a major issue. However, for interoperability, libraries still
* need to be careful to avoid a name clashes.
*/
#if defined(__sparc__)
#include <asm-generic/int-ll64.h>
#endif /* defined(__sparc__) */
#endif /* defined(_SPARC_TYPES_H) */

View File

@@ -849,7 +849,7 @@ void smp_tsb_sync(struct mm_struct *mm)
}
extern unsigned long xcall_flush_tlb_mm;
extern unsigned long xcall_flush_tlb_pending;
extern unsigned long xcall_flush_tlb_page;
extern unsigned long xcall_flush_tlb_kernel_range;
extern unsigned long xcall_fetch_glob_regs;
extern unsigned long xcall_fetch_glob_pmu;
@@ -1074,19 +1074,52 @@ local_flush_and_out:
put_cpu();
}
struct tlb_pending_info {
unsigned long ctx;
unsigned long nr;
unsigned long *vaddrs;
};
static void tlb_pending_func(void *info)
{
struct tlb_pending_info *t = info;
__flush_tlb_pending(t->ctx, t->nr, t->vaddrs);
}
void smp_flush_tlb_pending(struct mm_struct *mm, unsigned long nr, unsigned long *vaddrs)
{
u32 ctx = CTX_HWBITS(mm->context);
struct tlb_pending_info info;
int cpu = get_cpu();
info.ctx = ctx;
info.nr = nr;
info.vaddrs = vaddrs;
if (mm == current->mm && atomic_read(&mm->mm_users) == 1)
cpumask_copy(mm_cpumask(mm), cpumask_of(cpu));
else
smp_call_function_many(mm_cpumask(mm), tlb_pending_func,
&info, 1);
__flush_tlb_pending(ctx, nr, vaddrs);
put_cpu();
}
void smp_flush_tlb_page(struct mm_struct *mm, unsigned long vaddr)
{
unsigned long context = CTX_HWBITS(mm->context);
int cpu = get_cpu();
if (mm == current->mm && atomic_read(&mm->mm_users) == 1)
cpumask_copy(mm_cpumask(mm), cpumask_of(cpu));
else
smp_cross_call_masked(&xcall_flush_tlb_pending,
ctx, nr, (unsigned long) vaddrs,
smp_cross_call_masked(&xcall_flush_tlb_page,
context, vaddr, 0,
mm_cpumask(mm));
__flush_tlb_pending(ctx, nr, vaddrs);
__flush_tlb_page(context, vaddr);
put_cpu();
}

View File

@@ -119,11 +119,7 @@ void bit_map_clear(struct bit_map *t, int offset, int len)
void bit_map_init(struct bit_map *t, unsigned long *map, int size)
{
if ((size & 07) != 0)
BUG();
memset(map, 0, size>>3);
bitmap_zero(map, size);
memset(t, 0, sizeof *t);
spin_lock_init(&t->lock);
t->map = map;

View File

@@ -34,7 +34,7 @@
#define IOMMU_RNGE IOMMU_RNGE_256MB
#define IOMMU_START 0xF0000000
#define IOMMU_WINSIZE (256*1024*1024U)
#define IOMMU_NPTES (IOMMU_WINSIZE/PAGE_SIZE) /* 64K PTEs, 265KB */
#define IOMMU_NPTES (IOMMU_WINSIZE/PAGE_SIZE) /* 64K PTEs, 256KB */
#define IOMMU_ORDER 6 /* 4096 * (1<<6) */
/* srmmu.c */

View File

@@ -280,7 +280,9 @@ static void __init srmmu_nocache_init(void)
SRMMU_NOCACHE_ALIGN_MAX, 0UL);
memset(srmmu_nocache_pool, 0, srmmu_nocache_size);
srmmu_nocache_bitmap = __alloc_bootmem(bitmap_bits >> 3, SMP_CACHE_BYTES, 0UL);
srmmu_nocache_bitmap =
__alloc_bootmem(BITS_TO_LONGS(bitmap_bits) * sizeof(long),
SMP_CACHE_BYTES, 0UL);
bit_map_init(&srmmu_nocache_map, srmmu_nocache_bitmap, bitmap_bits);
srmmu_swapper_pg_dir = __srmmu_get_nocache(SRMMU_PGD_TABLE_SIZE, SRMMU_PGD_TABLE_SIZE);

View File

@@ -24,11 +24,17 @@ static DEFINE_PER_CPU(struct tlb_batch, tlb_batch);
void flush_tlb_pending(void)
{
struct tlb_batch *tb = &get_cpu_var(tlb_batch);
struct mm_struct *mm = tb->mm;
if (tb->tlb_nr) {
flush_tsb_user(tb);
if (!tb->tlb_nr)
goto out;
if (CTX_VALID(tb->mm->context)) {
flush_tsb_user(tb);
if (CTX_VALID(mm->context)) {
if (tb->tlb_nr == 1) {
global_flush_tlb_page(mm, tb->vaddrs[0]);
} else {
#ifdef CONFIG_SMP
smp_flush_tlb_pending(tb->mm, tb->tlb_nr,
&tb->vaddrs[0]);
@@ -37,12 +43,30 @@ void flush_tlb_pending(void)
tb->tlb_nr, &tb->vaddrs[0]);
#endif
}
tb->tlb_nr = 0;
}
tb->tlb_nr = 0;
out:
put_cpu_var(tlb_batch);
}
void arch_enter_lazy_mmu_mode(void)
{
struct tlb_batch *tb = &__get_cpu_var(tlb_batch);
tb->active = 1;
}
void arch_leave_lazy_mmu_mode(void)
{
struct tlb_batch *tb = &__get_cpu_var(tlb_batch);
if (tb->tlb_nr)
flush_tlb_pending();
tb->active = 0;
}
static void tlb_batch_add_one(struct mm_struct *mm, unsigned long vaddr,
bool exec)
{
@@ -60,6 +84,12 @@ static void tlb_batch_add_one(struct mm_struct *mm, unsigned long vaddr,
nr = 0;
}
if (!tb->active) {
global_flush_tlb_page(mm, vaddr);
flush_tsb_user_page(mm, vaddr);
goto out;
}
if (nr == 0)
tb->mm = mm;
@@ -68,6 +98,7 @@ static void tlb_batch_add_one(struct mm_struct *mm, unsigned long vaddr,
if (nr >= TLB_BATCH_NR)
flush_tlb_pending();
out:
put_cpu_var(tlb_batch);
}

View File

@@ -7,11 +7,10 @@
#include <linux/preempt.h>
#include <linux/slab.h>
#include <asm/page.h>
#include <asm/tlbflush.h>
#include <asm/tlb.h>
#include <asm/mmu_context.h>
#include <asm/pgtable.h>
#include <asm/mmu_context.h>
#include <asm/tsb.h>
#include <asm/tlb.h>
#include <asm/oplib.h>
extern struct tsb swapper_tsb[KERNEL_TSB_NENTRIES];
@@ -46,23 +45,27 @@ void flush_tsb_kernel_range(unsigned long start, unsigned long end)
}
}
static void __flush_tsb_one_entry(unsigned long tsb, unsigned long v,
unsigned long hash_shift,
unsigned long nentries)
{
unsigned long tag, ent, hash;
v &= ~0x1UL;
hash = tsb_hash(v, hash_shift, nentries);
ent = tsb + (hash * sizeof(struct tsb));
tag = (v >> 22UL);
tsb_flush(ent, tag);
}
static void __flush_tsb_one(struct tlb_batch *tb, unsigned long hash_shift,
unsigned long tsb, unsigned long nentries)
{
unsigned long i;
for (i = 0; i < tb->tlb_nr; i++) {
unsigned long v = tb->vaddrs[i];
unsigned long tag, ent, hash;
v &= ~0x1UL;
hash = tsb_hash(v, hash_shift, nentries);
ent = tsb + (hash * sizeof(struct tsb));
tag = (v >> 22UL);
tsb_flush(ent, tag);
}
for (i = 0; i < tb->tlb_nr; i++)
__flush_tsb_one_entry(tsb, tb->vaddrs[i], hash_shift, nentries);
}
void flush_tsb_user(struct tlb_batch *tb)
@@ -90,6 +93,30 @@ void flush_tsb_user(struct tlb_batch *tb)
spin_unlock_irqrestore(&mm->context.lock, flags);
}
void flush_tsb_user_page(struct mm_struct *mm, unsigned long vaddr)
{
unsigned long nentries, base, flags;
spin_lock_irqsave(&mm->context.lock, flags);
base = (unsigned long) mm->context.tsb_block[MM_TSB_BASE].tsb;
nentries = mm->context.tsb_block[MM_TSB_BASE].tsb_nentries;
if (tlb_type == cheetah_plus || tlb_type == hypervisor)
base = __pa(base);
__flush_tsb_one_entry(base, vaddr, PAGE_SHIFT, nentries);
#if defined(CONFIG_HUGETLB_PAGE) || defined(CONFIG_TRANSPARENT_HUGEPAGE)
if (mm->context.tsb_block[MM_TSB_HUGE].tsb) {
base = (unsigned long) mm->context.tsb_block[MM_TSB_HUGE].tsb;
nentries = mm->context.tsb_block[MM_TSB_HUGE].tsb_nentries;
if (tlb_type == cheetah_plus || tlb_type == hypervisor)
base = __pa(base);
__flush_tsb_one_entry(base, vaddr, HPAGE_SHIFT, nentries);
}
#endif
spin_unlock_irqrestore(&mm->context.lock, flags);
}
#define HV_PGSZ_IDX_BASE HV_PGSZ_IDX_8K
#define HV_PGSZ_MASK_BASE HV_PGSZ_MASK_8K

View File

@@ -52,6 +52,33 @@ __flush_tlb_mm: /* 18 insns */
nop
nop
.align 32
.globl __flush_tlb_page
__flush_tlb_page: /* 22 insns */
/* %o0 = context, %o1 = vaddr */
rdpr %pstate, %g7
andn %g7, PSTATE_IE, %g2
wrpr %g2, %pstate
mov SECONDARY_CONTEXT, %o4
ldxa [%o4] ASI_DMMU, %g2
stxa %o0, [%o4] ASI_DMMU
andcc %o1, 1, %g0
andn %o1, 1, %o3
be,pn %icc, 1f
or %o3, 0x10, %o3
stxa %g0, [%o3] ASI_IMMU_DEMAP
1: stxa %g0, [%o3] ASI_DMMU_DEMAP
membar #Sync
stxa %g2, [%o4] ASI_DMMU
sethi %hi(KERNBASE), %o4
flush %o4
retl
wrpr %g7, 0x0, %pstate
nop
nop
nop
nop
.align 32
.globl __flush_tlb_pending
__flush_tlb_pending: /* 26 insns */
@@ -203,6 +230,31 @@ __cheetah_flush_tlb_mm: /* 19 insns */
retl
wrpr %g7, 0x0, %pstate
__cheetah_flush_tlb_page: /* 22 insns */
/* %o0 = context, %o1 = vaddr */
rdpr %pstate, %g7
andn %g7, PSTATE_IE, %g2
wrpr %g2, 0x0, %pstate
wrpr %g0, 1, %tl
mov PRIMARY_CONTEXT, %o4
ldxa [%o4] ASI_DMMU, %g2
srlx %g2, CTX_PGSZ1_NUC_SHIFT, %o3
sllx %o3, CTX_PGSZ1_NUC_SHIFT, %o3
or %o0, %o3, %o0 /* Preserve nucleus page size fields */
stxa %o0, [%o4] ASI_DMMU
andcc %o1, 1, %g0
be,pn %icc, 1f
andn %o1, 1, %o3
stxa %g0, [%o3] ASI_IMMU_DEMAP
1: stxa %g0, [%o3] ASI_DMMU_DEMAP
membar #Sync
stxa %g2, [%o4] ASI_DMMU
sethi %hi(KERNBASE), %o4
flush %o4
wrpr %g0, 0, %tl
retl
wrpr %g7, 0x0, %pstate
__cheetah_flush_tlb_pending: /* 27 insns */
/* %o0 = context, %o1 = nr, %o2 = vaddrs[] */
rdpr %pstate, %g7
@@ -269,6 +321,20 @@ __hypervisor_flush_tlb_mm: /* 10 insns */
retl
nop
__hypervisor_flush_tlb_page: /* 11 insns */
/* %o0 = context, %o1 = vaddr */
mov %o0, %g2
mov %o1, %o0 /* ARG0: vaddr + IMMU-bit */
mov %g2, %o1 /* ARG1: mmu context */
mov HV_MMU_ALL, %o2 /* ARG2: flags */
srlx %o0, PAGE_SHIFT, %o0
sllx %o0, PAGE_SHIFT, %o0
ta HV_MMU_UNMAP_ADDR_TRAP
brnz,pn %o0, __hypervisor_tlb_tl0_error
mov HV_MMU_UNMAP_ADDR_TRAP, %o1
retl
nop
__hypervisor_flush_tlb_pending: /* 16 insns */
/* %o0 = context, %o1 = nr, %o2 = vaddrs[] */
sllx %o1, 3, %g1
@@ -339,6 +405,13 @@ cheetah_patch_cachetlbops:
call tlb_patch_one
mov 19, %o2
sethi %hi(__flush_tlb_page), %o0
or %o0, %lo(__flush_tlb_page), %o0
sethi %hi(__cheetah_flush_tlb_page), %o1
or %o1, %lo(__cheetah_flush_tlb_page), %o1
call tlb_patch_one
mov 22, %o2
sethi %hi(__flush_tlb_pending), %o0
or %o0, %lo(__flush_tlb_pending), %o0
sethi %hi(__cheetah_flush_tlb_pending), %o1
@@ -397,10 +470,9 @@ xcall_flush_tlb_mm: /* 21 insns */
nop
nop
.globl xcall_flush_tlb_pending
xcall_flush_tlb_pending: /* 21 insns */
/* %g5=context, %g1=nr, %g7=vaddrs[] */
sllx %g1, 3, %g1
.globl xcall_flush_tlb_page
xcall_flush_tlb_page: /* 17 insns */
/* %g5=context, %g1=vaddr */
mov PRIMARY_CONTEXT, %g4
ldxa [%g4] ASI_DMMU, %g2
srlx %g2, CTX_PGSZ1_NUC_SHIFT, %g4
@@ -408,20 +480,16 @@ xcall_flush_tlb_pending: /* 21 insns */
or %g5, %g4, %g5
mov PRIMARY_CONTEXT, %g4
stxa %g5, [%g4] ASI_DMMU
1: sub %g1, (1 << 3), %g1
ldx [%g7 + %g1], %g5
andcc %g5, 0x1, %g0
andcc %g1, 0x1, %g0
be,pn %icc, 2f
andn %g5, 0x1, %g5
andn %g1, 0x1, %g5
stxa %g0, [%g5] ASI_IMMU_DEMAP
2: stxa %g0, [%g5] ASI_DMMU_DEMAP
membar #Sync
brnz,pt %g1, 1b
nop
stxa %g2, [%g4] ASI_DMMU
retry
nop
nop
.globl xcall_flush_tlb_kernel_range
xcall_flush_tlb_kernel_range: /* 25 insns */
@@ -656,15 +724,13 @@ __hypervisor_xcall_flush_tlb_mm: /* 21 insns */
membar #Sync
retry
.globl __hypervisor_xcall_flush_tlb_pending
__hypervisor_xcall_flush_tlb_pending: /* 21 insns */
/* %g5=ctx, %g1=nr, %g7=vaddrs[], %g2,%g3,%g4,g6=scratch */
sllx %g1, 3, %g1
.globl __hypervisor_xcall_flush_tlb_page
__hypervisor_xcall_flush_tlb_page: /* 17 insns */
/* %g5=ctx, %g1=vaddr */
mov %o0, %g2
mov %o1, %g3
mov %o2, %g4
1: sub %g1, (1 << 3), %g1
ldx [%g7 + %g1], %o0 /* ARG0: virtual address */
mov %g1, %o0 /* ARG0: virtual address */
mov %g5, %o1 /* ARG1: mmu context */
mov HV_MMU_ALL, %o2 /* ARG2: flags */
srlx %o0, PAGE_SHIFT, %o0
@@ -673,8 +739,6 @@ __hypervisor_xcall_flush_tlb_pending: /* 21 insns */
mov HV_MMU_UNMAP_ADDR_TRAP, %g6
brnz,a,pn %o0, __hypervisor_tlb_xcall_error
mov %o0, %g5
brnz,pt %g1, 1b
nop
mov %g2, %o0
mov %g3, %o1
mov %g4, %o2
@@ -757,6 +821,13 @@ hypervisor_patch_cachetlbops:
call tlb_patch_one
mov 10, %o2
sethi %hi(__flush_tlb_page), %o0
or %o0, %lo(__flush_tlb_page), %o0
sethi %hi(__hypervisor_flush_tlb_page), %o1
or %o1, %lo(__hypervisor_flush_tlb_page), %o1
call tlb_patch_one
mov 11, %o2
sethi %hi(__flush_tlb_pending), %o0
or %o0, %lo(__flush_tlb_pending), %o0
sethi %hi(__hypervisor_flush_tlb_pending), %o1
@@ -788,12 +859,12 @@ hypervisor_patch_cachetlbops:
call tlb_patch_one
mov 21, %o2
sethi %hi(xcall_flush_tlb_pending), %o0
or %o0, %lo(xcall_flush_tlb_pending), %o0
sethi %hi(__hypervisor_xcall_flush_tlb_pending), %o1
or %o1, %lo(__hypervisor_xcall_flush_tlb_pending), %o1
sethi %hi(xcall_flush_tlb_page), %o0
or %o0, %lo(xcall_flush_tlb_page), %o0
sethi %hi(__hypervisor_xcall_flush_tlb_page), %o1
or %o1, %lo(__hypervisor_xcall_flush_tlb_page), %o1
call tlb_patch_one
mov 21, %o2
mov 17, %o2
sethi %hi(xcall_flush_tlb_kernel_range), %o0
or %o0, %lo(xcall_flush_tlb_kernel_range), %o0

View File

@@ -1549,6 +1549,7 @@ config X86_SMAP
config EFI
bool "EFI runtime service support"
depends on ACPI
select UCS2_STRING
---help---
This enables the kernel to use EFI runtime services that are
available (such as the EFI variable services).

View File

@@ -251,6 +251,51 @@ static void find_bits(unsigned long mask, u8 *pos, u8 *size)
*size = len;
}
static efi_status_t setup_efi_vars(struct boot_params *params)
{
struct setup_data *data;
struct efi_var_bootdata *efidata;
u64 store_size, remaining_size, var_size;
efi_status_t status;
if (sys_table->runtime->hdr.revision < EFI_2_00_SYSTEM_TABLE_REVISION)
return EFI_UNSUPPORTED;
data = (struct setup_data *)(unsigned long)params->hdr.setup_data;
while (data && data->next)
data = (struct setup_data *)(unsigned long)data->next;
status = efi_call_phys4((void *)sys_table->runtime->query_variable_info,
EFI_VARIABLE_NON_VOLATILE |
EFI_VARIABLE_BOOTSERVICE_ACCESS |
EFI_VARIABLE_RUNTIME_ACCESS, &store_size,
&remaining_size, &var_size);
if (status != EFI_SUCCESS)
return status;
status = efi_call_phys3(sys_table->boottime->allocate_pool,
EFI_LOADER_DATA, sizeof(*efidata), &efidata);
if (status != EFI_SUCCESS)
return status;
efidata->data.type = SETUP_EFI_VARS;
efidata->data.len = sizeof(struct efi_var_bootdata) -
sizeof(struct setup_data);
efidata->data.next = 0;
efidata->store_size = store_size;
efidata->remaining_size = remaining_size;
efidata->max_var_size = var_size;
if (data)
data->next = (unsigned long)efidata;
else
params->hdr.setup_data = (unsigned long)efidata;
}
static efi_status_t setup_efi_pci(struct boot_params *params)
{
efi_pci_io_protocol *pci;
@@ -1157,6 +1202,8 @@ struct boot_params *efi_main(void *handle, efi_system_table_t *_table,
setup_graphics(boot_params);
setup_efi_vars(boot_params);
setup_efi_pci(boot_params);
status = efi_call_phys3(sys_table->boottime->allocate_pool,

View File

@@ -102,6 +102,13 @@ extern void efi_call_phys_epilog(void);
extern void efi_unmap_memmap(void);
extern void efi_memory_uc(u64 addr, unsigned long size);
struct efi_var_bootdata {
struct setup_data data;
u64 store_size;
u64 remaining_size;
u64 max_var_size;
};
#ifdef CONFIG_EFI
static inline bool efi_is_native(void)

View File

@@ -6,6 +6,7 @@
#define SETUP_E820_EXT 1
#define SETUP_DTB 2
#define SETUP_PCI 3
#define SETUP_EFI_VARS 4
/* ram_size flags */
#define RAMDISK_IMAGE_START_MASK 0x07FF

View File

@@ -35,13 +35,6 @@ static bool __init ms_hyperv_platform(void)
if (!boot_cpu_has(X86_FEATURE_HYPERVISOR))
return false;
/*
* Xen emulates Hyper-V to support enlightened Windows.
* Check to see first if we are on a Xen Hypervisor.
*/
if (xen_cpuid_base())
return false;
cpuid(HYPERV_CPUID_VENDOR_AND_MAX_FUNCTIONS,
&eax, &hyp_signature[0], &hyp_signature[1], &hyp_signature[2]);
@@ -82,12 +75,6 @@ static void __init ms_hyperv_init_platform(void)
if (ms_hyperv.features & HV_X64_MSR_TIME_REF_COUNT_AVAILABLE)
clocksource_register_hz(&hyperv_cs, NSEC_PER_SEC/100);
#if IS_ENABLED(CONFIG_HYPERV)
/*
* Setup the IDT for hypervisor callback.
*/
alloc_intr_gate(HYPERVISOR_CALLBACK_VECTOR, hyperv_callback_vector);
#endif
}
const __refconst struct hypervisor_x86 x86_hyper_ms_hyperv = {
@@ -103,6 +90,11 @@ static irq_handler_t vmbus_isr;
void hv_register_vmbus_handler(int irq, irq_handler_t handler)
{
/*
* Setup the IDT for hypervisor callback.
*/
alloc_intr_gate(HYPERVISOR_CALLBACK_VECTOR, hyperv_callback_vector);
vmbus_irq = irq;
vmbus_isr = handler;
}

View File

@@ -153,8 +153,14 @@ static struct event_constraint intel_gen_event_constraints[] __read_mostly =
};
static struct extra_reg intel_snb_extra_regs[] __read_mostly = {
INTEL_EVENT_EXTRA_REG(0xb7, MSR_OFFCORE_RSP_0, 0x3fffffffffull, RSP_0),
INTEL_EVENT_EXTRA_REG(0xbb, MSR_OFFCORE_RSP_1, 0x3fffffffffull, RSP_1),
INTEL_EVENT_EXTRA_REG(0xb7, MSR_OFFCORE_RSP_0, 0x3f807f8fffull, RSP_0),
INTEL_EVENT_EXTRA_REG(0xbb, MSR_OFFCORE_RSP_1, 0x3f807f8fffull, RSP_1),
EVENT_EXTRA_END
};
static struct extra_reg intel_snbep_extra_regs[] __read_mostly = {
INTEL_EVENT_EXTRA_REG(0xb7, MSR_OFFCORE_RSP_0, 0x3fffff8fffull, RSP_0),
INTEL_EVENT_EXTRA_REG(0xbb, MSR_OFFCORE_RSP_1, 0x3fffff8fffull, RSP_1),
EVENT_EXTRA_END
};
@@ -2097,7 +2103,10 @@ __init int intel_pmu_init(void)
x86_pmu.event_constraints = intel_snb_event_constraints;
x86_pmu.pebs_constraints = intel_snb_pebs_event_constraints;
x86_pmu.pebs_aliases = intel_pebs_aliases_snb;
x86_pmu.extra_regs = intel_snb_extra_regs;
if (boot_cpu_data.x86_model == 45)
x86_pmu.extra_regs = intel_snbep_extra_regs;
else
x86_pmu.extra_regs = intel_snb_extra_regs;
/* all extra regs are per-cpu when HT is on */
x86_pmu.er_flags |= ERF_HAS_RSP_1;
x86_pmu.er_flags |= ERF_NO_HT_SHARING;
@@ -2123,7 +2132,10 @@ __init int intel_pmu_init(void)
x86_pmu.event_constraints = intel_ivb_event_constraints;
x86_pmu.pebs_constraints = intel_ivb_pebs_event_constraints;
x86_pmu.pebs_aliases = intel_pebs_aliases_snb;
x86_pmu.extra_regs = intel_snb_extra_regs;
if (boot_cpu_data.x86_model == 62)
x86_pmu.extra_regs = intel_snbep_extra_regs;
else
x86_pmu.extra_regs = intel_snb_extra_regs;
/* all extra regs are per-cpu when HT is on */
x86_pmu.er_flags |= ERF_HAS_RSP_1;
x86_pmu.er_flags |= ERF_NO_HT_SHARING;

View File

@@ -45,9 +45,6 @@ static int __cpuinit x86_vendor(void)
u32 eax = 0x00000000;
u32 ebx, ecx = 0, edx;
if (!have_cpuid_p())
return X86_VENDOR_UNKNOWN;
native_cpuid(&eax, &ebx, &ecx, &edx);
if (CPUID_IS(CPUID_INTEL1, CPUID_INTEL2, CPUID_INTEL3, ebx, ecx, edx))
@@ -59,18 +56,45 @@ static int __cpuinit x86_vendor(void)
return X86_VENDOR_UNKNOWN;
}
static int __cpuinit x86_family(void)
{
u32 eax = 0x00000001;
u32 ebx, ecx = 0, edx;
int x86;
native_cpuid(&eax, &ebx, &ecx, &edx);
x86 = (eax >> 8) & 0xf;
if (x86 == 15)
x86 += (eax >> 20) & 0xff;
return x86;
}
void __init load_ucode_bsp(void)
{
int vendor = x86_vendor();
int vendor, x86;
if (vendor == X86_VENDOR_INTEL)
if (!have_cpuid_p())
return;
vendor = x86_vendor();
x86 = x86_family();
if (vendor == X86_VENDOR_INTEL && x86 >= 6)
load_ucode_intel_bsp();
}
void __cpuinit load_ucode_ap(void)
{
int vendor = x86_vendor();
int vendor, x86;
if (vendor == X86_VENDOR_INTEL)
if (!have_cpuid_p())
return;
vendor = x86_vendor();
x86 = x86_family();
if (vendor == X86_VENDOR_INTEL && x86 >= 6)
load_ucode_intel_ap();
}

View File

@@ -507,11 +507,14 @@ static void __init memblock_x86_reserve_range_setup_data(void)
/*
* Keep the crash kernel below this limit. On 32 bits earlier kernels
* would limit the kernel to the low 512 MiB due to mapping restrictions.
* On 64bit, old kexec-tools need to under 896MiB.
*/
#ifdef CONFIG_X86_32
# define CRASH_KERNEL_ADDR_MAX (512 << 20)
# define CRASH_KERNEL_ADDR_LOW_MAX (512 << 20)
# define CRASH_KERNEL_ADDR_HIGH_MAX (512 << 20)
#else
# define CRASH_KERNEL_ADDR_MAX MAXMEM
# define CRASH_KERNEL_ADDR_LOW_MAX (896UL<<20)
# define CRASH_KERNEL_ADDR_HIGH_MAX MAXMEM
#endif
static void __init reserve_crashkernel_low(void)
@@ -521,19 +524,35 @@ static void __init reserve_crashkernel_low(void)
unsigned long long low_base = 0, low_size = 0;
unsigned long total_low_mem;
unsigned long long base;
bool auto_set = false;
int ret;
total_low_mem = memblock_mem_size(1UL<<(32-PAGE_SHIFT));
/* crashkernel=Y,low */
ret = parse_crashkernel_low(boot_command_line, total_low_mem,
&low_size, &base);
if (ret != 0 || low_size <= 0)
return;
if (ret != 0) {
/*
* two parts from lib/swiotlb.c:
* swiotlb size: user specified with swiotlb= or default.
* swiotlb overflow buffer: now is hardcoded to 32k.
* We round it to 8M for other buffers that
* may need to stay low too.
*/
low_size = swiotlb_size_or_default() + (8UL<<20);
auto_set = true;
} else {
/* passed with crashkernel=0,low ? */
if (!low_size)
return;
}
low_base = memblock_find_in_range(low_size, (1ULL<<32),
low_size, alignment);
if (!low_base) {
pr_info("crashkernel low reservation failed - No suitable area found.\n");
if (!auto_set)
pr_info("crashkernel low reservation failed - No suitable area found.\n");
return;
}
@@ -554,14 +573,22 @@ static void __init reserve_crashkernel(void)
const unsigned long long alignment = 16<<20; /* 16M */
unsigned long long total_mem;
unsigned long long crash_size, crash_base;
bool high = false;
int ret;
total_mem = memblock_phys_mem_size();
/* crashkernel=XM */
ret = parse_crashkernel(boot_command_line, total_mem,
&crash_size, &crash_base);
if (ret != 0 || crash_size <= 0)
return;
if (ret != 0 || crash_size <= 0) {
/* crashkernel=X,high */
ret = parse_crashkernel_high(boot_command_line, total_mem,
&crash_size, &crash_base);
if (ret != 0 || crash_size <= 0)
return;
high = true;
}
/* 0 means: find the address automatically */
if (crash_base <= 0) {
@@ -569,7 +596,9 @@ static void __init reserve_crashkernel(void)
* kexec want bzImage is below CRASH_KERNEL_ADDR_MAX
*/
crash_base = memblock_find_in_range(alignment,
CRASH_KERNEL_ADDR_MAX, crash_size, alignment);
high ? CRASH_KERNEL_ADDR_HIGH_MAX :
CRASH_KERNEL_ADDR_LOW_MAX,
crash_size, alignment);
if (!crash_base) {
pr_info("crashkernel reservation failed - No suitable area found.\n");

View File

@@ -41,6 +41,7 @@
#include <linux/io.h>
#include <linux/reboot.h>
#include <linux/bcd.h>
#include <linux/ucs2_string.h>
#include <asm/setup.h>
#include <asm/efi.h>
@@ -51,6 +52,13 @@
#define EFI_DEBUG 1
/*
* There's some additional metadata associated with each
* variable. Intel's reference implementation is 60 bytes - bump that
* to account for potential alignment constraints
*/
#define VAR_METADATA_SIZE 64
struct efi __read_mostly efi = {
.mps = EFI_INVALID_TABLE_ADDR,
.acpi = EFI_INVALID_TABLE_ADDR,
@@ -69,6 +77,13 @@ struct efi_memory_map memmap;
static struct efi efi_phys __initdata;
static efi_system_table_t efi_systab __initdata;
static u64 efi_var_store_size;
static u64 efi_var_remaining_size;
static u64 efi_var_max_var_size;
static u64 boot_used_size;
static u64 boot_var_size;
static u64 active_size;
unsigned long x86_efi_facility;
/*
@@ -98,6 +113,15 @@ static int __init setup_add_efi_memmap(char *arg)
}
early_param("add_efi_memmap", setup_add_efi_memmap);
static bool efi_no_storage_paranoia;
static int __init setup_storage_paranoia(char *arg)
{
efi_no_storage_paranoia = true;
return 0;
}
early_param("efi_no_storage_paranoia", setup_storage_paranoia);
static efi_status_t virt_efi_get_time(efi_time_t *tm, efi_time_cap_t *tc)
{
@@ -162,8 +186,53 @@ static efi_status_t virt_efi_get_next_variable(unsigned long *name_size,
efi_char16_t *name,
efi_guid_t *vendor)
{
return efi_call_virt3(get_next_variable,
name_size, name, vendor);
efi_status_t status;
static bool finished = false;
static u64 var_size;
status = efi_call_virt3(get_next_variable,
name_size, name, vendor);
if (status == EFI_NOT_FOUND) {
finished = true;
if (var_size < boot_used_size) {
boot_var_size = boot_used_size - var_size;
active_size += boot_var_size;
} else {
printk(KERN_WARNING FW_BUG "efi: Inconsistent initial sizes\n");
}
}
if (boot_used_size && !finished) {
unsigned long size;
u32 attr;
efi_status_t s;
void *tmp;
s = virt_efi_get_variable(name, vendor, &attr, &size, NULL);
if (s != EFI_BUFFER_TOO_SMALL || !size)
return status;
tmp = kmalloc(size, GFP_ATOMIC);
if (!tmp)
return status;
s = virt_efi_get_variable(name, vendor, &attr, &size, tmp);
if (s == EFI_SUCCESS && (attr & EFI_VARIABLE_NON_VOLATILE)) {
var_size += size;
var_size += ucs2_strsize(name, 1024);
active_size += size;
active_size += VAR_METADATA_SIZE;
active_size += ucs2_strsize(name, 1024);
}
kfree(tmp);
}
return status;
}
static efi_status_t virt_efi_set_variable(efi_char16_t *name,
@@ -172,9 +241,34 @@ static efi_status_t virt_efi_set_variable(efi_char16_t *name,
unsigned long data_size,
void *data)
{
return efi_call_virt5(set_variable,
name, vendor, attr,
data_size, data);
efi_status_t status;
u32 orig_attr = 0;
unsigned long orig_size = 0;
status = virt_efi_get_variable(name, vendor, &orig_attr, &orig_size,
NULL);
if (status != EFI_BUFFER_TOO_SMALL)
orig_size = 0;
status = efi_call_virt5(set_variable,
name, vendor, attr,
data_size, data);
if (status == EFI_SUCCESS) {
if (orig_size) {
active_size -= orig_size;
active_size -= ucs2_strsize(name, 1024);
active_size -= VAR_METADATA_SIZE;
}
if (data_size) {
active_size += data_size;
active_size += ucs2_strsize(name, 1024);
active_size += VAR_METADATA_SIZE;
}
}
return status;
}
static efi_status_t virt_efi_query_variable_info(u32 attr,
@@ -682,6 +776,9 @@ void __init efi_init(void)
char vendor[100] = "unknown";
int i = 0;
void *tmp;
struct setup_data *data;
struct efi_var_bootdata *efi_var_data;
u64 pa_data;
#ifdef CONFIG_X86_32
if (boot_params.efi_info.efi_systab_hi ||
@@ -699,6 +796,22 @@ void __init efi_init(void)
if (efi_systab_init(efi_phys.systab))
return;
pa_data = boot_params.hdr.setup_data;
while (pa_data) {
data = early_ioremap(pa_data, sizeof(*efi_var_data));
if (data->type == SETUP_EFI_VARS) {
efi_var_data = (struct efi_var_bootdata *)data;
efi_var_store_size = efi_var_data->store_size;
efi_var_remaining_size = efi_var_data->remaining_size;
efi_var_max_var_size = efi_var_data->max_var_size;
}
pa_data = data->next;
early_iounmap(data, sizeof(*efi_var_data));
}
boot_used_size = efi_var_store_size - efi_var_remaining_size;
set_bit(EFI_SYSTEM_TABLES, &x86_efi_facility);
/*
@@ -999,3 +1112,48 @@ u64 efi_mem_attributes(unsigned long phys_addr)
}
return 0;
}
/*
* Some firmware has serious problems when using more than 50% of the EFI
* variable store, i.e. it triggers bugs that can brick machines. Ensure that
* we never use more than this safe limit.
*
* Return EFI_SUCCESS if it is safe to write 'size' bytes to the variable
* store.
*/
efi_status_t efi_query_variable_store(u32 attributes, unsigned long size)
{
efi_status_t status;
u64 storage_size, remaining_size, max_size;
status = efi.query_variable_info(attributes, &storage_size,
&remaining_size, &max_size);
if (status != EFI_SUCCESS)
return status;
if (!max_size && remaining_size > size)
printk_once(KERN_ERR FW_BUG "Broken EFI implementation"
" is returning MaxVariableSize=0\n");
/*
* Some firmware implementations refuse to boot if there's insufficient
* space in the variable store. We account for that by refusing the
* write if permitting it would reduce the available space to under
* 50%. However, some firmware won't reclaim variable space until
* after the used (not merely the actively used) space drops below
* a threshold. We can approximate that case with the value calculated
* above. If both the firmware and our calculations indicate that the
* available space would drop below 50%, refuse the write.
*/
if (!storage_size || size > remaining_size ||
(max_size && size > max_size))
return EFI_OUT_OF_RESOURCES;
if (!efi_no_storage_paranoia &&
((active_size + size + VAR_METADATA_SIZE > storage_size / 2) &&
(remaining_size - size < storage_size / 2)))
return EFI_OUT_OF_RESOURCES;
return EFI_SUCCESS;
}
EXPORT_SYMBOL_GPL(efi_query_variable_store);

View File

@@ -39,6 +39,7 @@
EXPORT_TRACEPOINT_SYMBOL_GPL(block_bio_remap);
EXPORT_TRACEPOINT_SYMBOL_GPL(block_rq_remap);
EXPORT_TRACEPOINT_SYMBOL_GPL(block_bio_complete);
EXPORT_TRACEPOINT_SYMBOL_GPL(block_unplug);
DEFINE_IDA(blk_queue_ida);

View File

@@ -161,6 +161,8 @@ static int hash_recvmsg(struct kiocb *unused, struct socket *sock,
else if (len < ds)
msg->msg_flags |= MSG_TRUNC;
msg->msg_namelen = 0;
lock_sock(sk);
if (ctx->more) {
ctx->more = 0;

View File

@@ -432,6 +432,7 @@ static int skcipher_recvmsg(struct kiocb *unused, struct socket *sock,
long copied = 0;
lock_sock(sk);
msg->msg_namelen = 0;
for (iov = msg->msg_iov, iovlen = msg->msg_iovlen; iovlen > 0;
iovlen--, iov++) {
unsigned long seglen = iov->iov_len;

View File

@@ -1742,9 +1742,10 @@ static int rbd_img_request_submit(struct rbd_img_request *img_request)
struct rbd_device *rbd_dev = img_request->rbd_dev;
struct ceph_osd_client *osdc = &rbd_dev->rbd_client->client->osdc;
struct rbd_obj_request *obj_request;
struct rbd_obj_request *next_obj_request;
dout("%s: img %p\n", __func__, img_request);
for_each_obj_request(img_request, obj_request) {
for_each_obj_request_safe(img_request, obj_request, next_obj_request) {
int ret;
obj_request->callback = rbd_img_obj_callback;

View File

@@ -373,26 +373,14 @@ static int hpet_mmap(struct file *file, struct vm_area_struct *vma)
struct hpet_dev *devp;
unsigned long addr;
if (((vma->vm_end - vma->vm_start) != PAGE_SIZE) || vma->vm_pgoff)
return -EINVAL;
devp = file->private_data;
addr = devp->hd_hpets->hp_hpet_phys;
if (addr & (PAGE_SIZE - 1))
return -ENOSYS;
vma->vm_flags |= VM_IO;
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
if (io_remap_pfn_range(vma, vma->vm_start, addr >> PAGE_SHIFT,
PAGE_SIZE, vma->vm_page_prot)) {
printk(KERN_ERR "%s: io_remap_pfn_range failed\n",
__func__);
return -EAGAIN;
}
return 0;
return vm_iomap_memory(vma, addr, PAGE_SIZE);
#else
return -ENOSYS;
#endif

View File

@@ -310,8 +310,6 @@ static void atc_complete_all(struct at_dma_chan *atchan)
dev_vdbg(chan2dev(&atchan->chan_common), "complete all\n");
BUG_ON(atc_chan_is_enabled(atchan));
/*
* Submit queued descriptors ASAP, i.e. before we go through
* the completed ones.
@@ -368,6 +366,9 @@ static void atc_advance_work(struct at_dma_chan *atchan)
{
dev_vdbg(chan2dev(&atchan->chan_common), "advance_work\n");
if (atc_chan_is_enabled(atchan))
return;
if (list_empty(&atchan->active_list) ||
list_is_singular(&atchan->active_list)) {
atc_complete_all(atchan);
@@ -1078,9 +1079,7 @@ static void atc_issue_pending(struct dma_chan *chan)
return;
spin_lock_irqsave(&atchan->lock, flags);
if (!atc_chan_is_enabled(atchan)) {
atc_advance_work(atchan);
}
atc_advance_work(atchan);
spin_unlock_irqrestore(&atchan->lock, flags);
}

View File

@@ -39,6 +39,7 @@ config FIRMWARE_MEMMAP
config EFI_VARS
tristate "EFI Variable Support via sysfs"
depends on EFI
select UCS2_STRING
default n
help
If you say Y here, you are able to get EFI (Extensible Firmware

View File

@@ -80,6 +80,7 @@
#include <linux/slab.h>
#include <linux/pstore.h>
#include <linux/ctype.h>
#include <linux/ucs2_string.h>
#include <linux/fs.h>
#include <linux/ramfs.h>
@@ -172,51 +173,6 @@ static void efivar_update_sysfs_entries(struct work_struct *);
static DECLARE_WORK(efivar_work, efivar_update_sysfs_entries);
static bool efivar_wq_enabled = true;
/* Return the number of unicode characters in data */
static unsigned long
utf16_strnlen(efi_char16_t *s, size_t maxlength)
{
unsigned long length = 0;
while (*s++ != 0 && length < maxlength)
length++;
return length;
}
static inline unsigned long
utf16_strlen(efi_char16_t *s)
{
return utf16_strnlen(s, ~0UL);
}
/*
* Return the number of bytes is the length of this string
* Note: this is NOT the same as the number of unicode characters
*/
static inline unsigned long
utf16_strsize(efi_char16_t *data, unsigned long maxlength)
{
return utf16_strnlen(data, maxlength/sizeof(efi_char16_t)) * sizeof(efi_char16_t);
}
static inline int
utf16_strncmp(const efi_char16_t *a, const efi_char16_t *b, size_t len)
{
while (1) {
if (len == 0)
return 0;
if (*a < *b)
return -1;
if (*a > *b)
return 1;
if (*a == 0) /* implies *b == 0 */
return 0;
a++;
b++;
len--;
}
}
static bool
validate_device_path(struct efi_variable *var, int match, u8 *buffer,
unsigned long len)
@@ -268,7 +224,7 @@ validate_load_option(struct efi_variable *var, int match, u8 *buffer,
u16 filepathlength;
int i, desclength = 0, namelen;
namelen = utf16_strnlen(var->VariableName, sizeof(var->VariableName));
namelen = ucs2_strnlen(var->VariableName, sizeof(var->VariableName));
/* Either "Boot" or "Driver" followed by four digits of hex */
for (i = match; i < match+4; i++) {
@@ -291,7 +247,7 @@ validate_load_option(struct efi_variable *var, int match, u8 *buffer,
* There's no stored length for the description, so it has to be
* found by hand
*/
desclength = utf16_strsize((efi_char16_t *)(buffer + 6), len - 6) + 2;
desclength = ucs2_strsize((efi_char16_t *)(buffer + 6), len - 6) + 2;
/* Each boot entry must have a descriptor */
if (!desclength)
@@ -436,24 +392,12 @@ static efi_status_t
check_var_size_locked(struct efivars *efivars, u32 attributes,
unsigned long size)
{
u64 storage_size, remaining_size, max_size;
efi_status_t status;
const struct efivar_operations *fops = efivars->ops;
if (!efivars->ops->query_variable_info)
if (!efivars->ops->query_variable_store)
return EFI_UNSUPPORTED;
status = fops->query_variable_info(attributes, &storage_size,
&remaining_size, &max_size);
if (status != EFI_SUCCESS)
return status;
if (!storage_size || size > remaining_size || size > max_size ||
(remaining_size - size) < (storage_size / 2))
return EFI_OUT_OF_RESOURCES;
return status;
return fops->query_variable_store(attributes, size);
}
@@ -593,7 +537,7 @@ efivar_store_raw(struct efivar_entry *entry, const char *buf, size_t count)
spin_lock_irq(&efivars->lock);
status = check_var_size_locked(efivars, new_var->Attributes,
new_var->DataSize + utf16_strsize(new_var->VariableName, 1024));
new_var->DataSize + ucs2_strsize(new_var->VariableName, 1024));
if (status == EFI_SUCCESS || status == EFI_UNSUPPORTED)
status = efivars->ops->set_variable(new_var->VariableName,
@@ -771,7 +715,7 @@ static ssize_t efivarfs_file_write(struct file *file,
* QueryVariableInfo() isn't supported by the firmware.
*/
varsize = datasize + utf16_strsize(var->var.VariableName, 1024);
varsize = datasize + ucs2_strsize(var->var.VariableName, 1024);
status = check_var_size(efivars, attributes, varsize);
if (status != EFI_SUCCESS) {
@@ -1223,7 +1167,7 @@ static int efivarfs_fill_super(struct super_block *sb, void *data, int silent)
inode = NULL;
len = utf16_strlen(entry->var.VariableName);
len = ucs2_strlen(entry->var.VariableName);
/* name, plus '-', plus GUID, plus NUL*/
name = kmalloc(len + 1 + GUID_LEN + 1, GFP_ATOMIC);
@@ -1481,8 +1425,8 @@ static int efi_pstore_erase(enum pstore_type_id type, u64 id, int count,
if (efi_guidcmp(entry->var.VendorGuid, vendor))
continue;
if (utf16_strncmp(entry->var.VariableName, efi_name,
utf16_strlen(efi_name))) {
if (ucs2_strncmp(entry->var.VariableName, efi_name,
ucs2_strlen(efi_name))) {
/*
* Check if an old format,
* which doesn't support holding
@@ -1494,8 +1438,8 @@ static int efi_pstore_erase(enum pstore_type_id type, u64 id, int count,
for (i = 0; i < DUMP_NAME_LEN; i++)
efi_name_old[i] = name_old[i];
if (utf16_strncmp(entry->var.VariableName, efi_name_old,
utf16_strlen(efi_name_old)))
if (ucs2_strncmp(entry->var.VariableName, efi_name_old,
ucs2_strlen(efi_name_old)))
continue;
}
@@ -1573,8 +1517,8 @@ static ssize_t efivar_create(struct file *filp, struct kobject *kobj,
* Does this variable already exist?
*/
list_for_each_entry_safe(search_efivar, n, &efivars->list, list) {
strsize1 = utf16_strsize(search_efivar->var.VariableName, 1024);
strsize2 = utf16_strsize(new_var->VariableName, 1024);
strsize1 = ucs2_strsize(search_efivar->var.VariableName, 1024);
strsize2 = ucs2_strsize(new_var->VariableName, 1024);
if (strsize1 == strsize2 &&
!memcmp(&(search_efivar->var.VariableName),
new_var->VariableName, strsize1) &&
@@ -1590,7 +1534,7 @@ static ssize_t efivar_create(struct file *filp, struct kobject *kobj,
}
status = check_var_size_locked(efivars, new_var->Attributes,
new_var->DataSize + utf16_strsize(new_var->VariableName, 1024));
new_var->DataSize + ucs2_strsize(new_var->VariableName, 1024));
if (status && status != EFI_UNSUPPORTED) {
spin_unlock_irq(&efivars->lock);
@@ -1614,7 +1558,7 @@ static ssize_t efivar_create(struct file *filp, struct kobject *kobj,
/* Create the entry in sysfs. Locking is not required here */
status = efivar_create_sysfs_entry(efivars,
utf16_strsize(new_var->VariableName,
ucs2_strsize(new_var->VariableName,
1024),
new_var->VariableName,
&new_var->VendorGuid);
@@ -1644,8 +1588,8 @@ static ssize_t efivar_delete(struct file *filp, struct kobject *kobj,
* Does this variable already exist?
*/
list_for_each_entry_safe(search_efivar, n, &efivars->list, list) {
strsize1 = utf16_strsize(search_efivar->var.VariableName, 1024);
strsize2 = utf16_strsize(del_var->VariableName, 1024);
strsize1 = ucs2_strsize(search_efivar->var.VariableName, 1024);
strsize2 = ucs2_strsize(del_var->VariableName, 1024);
if (strsize1 == strsize2 &&
!memcmp(&(search_efivar->var.VariableName),
del_var->VariableName, strsize1) &&
@@ -1684,16 +1628,17 @@ static ssize_t efivar_delete(struct file *filp, struct kobject *kobj,
return count;
}
static bool variable_is_present(efi_char16_t *variable_name, efi_guid_t *vendor)
static bool variable_is_present(struct efivars *efivars,
efi_char16_t *variable_name,
efi_guid_t *vendor)
{
struct efivar_entry *entry, *n;
struct efivars *efivars = &__efivars;
unsigned long strsize1, strsize2;
bool found = false;
strsize1 = utf16_strsize(variable_name, 1024);
strsize1 = ucs2_strsize(variable_name, 1024);
list_for_each_entry_safe(entry, n, &efivars->list, list) {
strsize2 = utf16_strsize(entry->var.VariableName, 1024);
strsize2 = ucs2_strsize(entry->var.VariableName, 1024);
if (strsize1 == strsize2 &&
!memcmp(variable_name, &(entry->var.VariableName),
strsize2) &&
@@ -1759,8 +1704,8 @@ static void efivar_update_sysfs_entries(struct work_struct *work)
if (status != EFI_SUCCESS) {
break;
} else {
if (!variable_is_present(variable_name,
&vendor)) {
if (!variable_is_present(efivars,
variable_name, &vendor)) {
found = true;
break;
}
@@ -2064,7 +2009,8 @@ int register_efivars(struct efivars *efivars,
* we'll ever see a different variable name,
* and may end up looping here forever.
*/
if (variable_is_present(variable_name, &vendor_guid)) {
if (variable_is_present(efivars, variable_name,
&vendor_guid)) {
dup_variable_bug(variable_name, &vendor_guid,
variable_name_size);
status = EFI_NOT_FOUND;
@@ -2131,7 +2077,7 @@ efivars_init(void)
ops.get_variable = efi.get_variable;
ops.set_variable = efi.set_variable;
ops.get_next_variable = efi.get_next_variable;
ops.query_variable_info = efi.query_variable_info;
ops.query_variable_store = efi_query_variable_store;
error = register_efivars(&__efivars, &ops, efi_kobj);
if (error)

View File

@@ -642,7 +642,12 @@ static struct platform_driver pxa_gpio_driver = {
.of_match_table = of_match_ptr(pxa_gpio_dt_ids),
},
};
module_platform_driver(pxa_gpio_driver);
static int __init pxa_gpio_init(void)
{
return platform_driver_register(&pxa_gpio_driver);
}
postcore_initcall(pxa_gpio_init);
#ifdef CONFIG_PM
static int pxa_gpio_suspend(void)

View File

@@ -465,6 +465,7 @@ static const struct x86_cpu_id intel_idle_ids[] = {
ICPU(0x3c, idle_cpu_hsw),
ICPU(0x3f, idle_cpu_hsw),
ICPU(0x45, idle_cpu_hsw),
ICPU(0x46, idle_cpu_hsw),
{}
};
MODULE_DEVICE_TABLE(x86cpu, intel_idle_ids);

View File

@@ -359,7 +359,7 @@ static int wacom_intuos_inout(struct wacom_wac *wacom)
case 0x802: /* Intuos4 General Pen */
case 0x804: /* Intuos4 Marker Pen */
case 0x40802: /* Intuos4 Classic Pen */
case 0x18803: /* DTH2242 Grip Pen */
case 0x18802: /* DTH2242 Grip Pen */
case 0x022:
wacom->tool[idx] = BTN_TOOL_PEN;
break;
@@ -1912,7 +1912,7 @@ static const struct wacom_features wacom_features_0xBB =
{ "Wacom Intuos4 12x19", WACOM_PKGLEN_INTUOS, 97536, 60960, 2047,
63, INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
static const struct wacom_features wacom_features_0xBC =
{ "Wacom Intuos4 WL", WACOM_PKGLEN_INTUOS, 40840, 25400, 2047,
{ "Wacom Intuos4 WL", WACOM_PKGLEN_INTUOS, 40640, 25400, 2047,
63, INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES };
static const struct wacom_features wacom_features_0x26 =
{ "Wacom Intuos5 touch S", WACOM_PKGLEN_INTUOS, 31496, 19685, 2047,
@@ -2144,7 +2144,7 @@ const struct usb_device_id wacom_ids[] = {
{ USB_DEVICE_WACOM(0x44) },
{ USB_DEVICE_WACOM(0x45) },
{ USB_DEVICE_WACOM(0x59) },
{ USB_DEVICE_WACOM(0x5D) },
{ USB_DEVICE_DETAILED(0x5D, USB_CLASS_HID, 0, 0) },
{ USB_DEVICE_WACOM(0xB0) },
{ USB_DEVICE_WACOM(0xB1) },
{ USB_DEVICE_WACOM(0xB2) },
@@ -2209,7 +2209,7 @@ const struct usb_device_id wacom_ids[] = {
{ USB_DEVICE_WACOM(0x47) },
{ USB_DEVICE_WACOM(0xF4) },
{ USB_DEVICE_WACOM(0xF8) },
{ USB_DEVICE_WACOM(0xF6) },
{ USB_DEVICE_DETAILED(0xF6, USB_CLASS_HID, 0, 0) },
{ USB_DEVICE_WACOM(0xFA) },
{ USB_DEVICE_LENOVO(0x6004) },
{ }

View File

@@ -236,7 +236,8 @@ static int gic_retrigger(struct irq_data *d)
if (gic_arch_extn.irq_retrigger)
return gic_arch_extn.irq_retrigger(d);
return -ENXIO;
/* the genirq layer expects 0 if we can't retrigger in hardware */
return 0;
}
#ifdef CONFIG_SMP

View File

@@ -611,6 +611,7 @@ static void dec_pending(struct dm_io *io, int error)
queue_io(md, bio);
} else {
/* done with normal IO or empty flush */
trace_block_bio_complete(md->queue, bio, io_error);
bio_endio(bio, io_error);
}
}

View File

@@ -184,6 +184,8 @@ static void return_io(struct bio *return_bi)
return_bi = bi->bi_next;
bi->bi_next = NULL;
bi->bi_size = 0;
trace_block_bio_complete(bdev_get_queue(bi->bi_bdev),
bi, 0);
bio_endio(bi, 0);
bi = return_bi;
}
@@ -3914,6 +3916,8 @@ static void raid5_align_endio(struct bio *bi, int error)
rdev_dec_pending(rdev, conf->mddev);
if (!error && uptodate) {
trace_block_bio_complete(bdev_get_queue(raid_bi->bi_bdev),
raid_bi, 0);
bio_endio(raid_bi, 0);
if (atomic_dec_and_test(&conf->active_aligned_reads))
wake_up(&conf->wait_for_stripe);
@@ -4382,6 +4386,8 @@ static void make_request(struct mddev *mddev, struct bio * bi)
if ( rw == WRITE )
md_write_end(mddev);
trace_block_bio_complete(bdev_get_queue(bi->bi_bdev),
bi, 0);
bio_endio(bi, 0);
}
}
@@ -4758,8 +4764,11 @@ static int retry_aligned_read(struct r5conf *conf, struct bio *raid_bio)
handled++;
}
remaining = raid5_dec_bi_active_stripes(raid_bio);
if (remaining == 0)
if (remaining == 0) {
trace_block_bio_complete(bdev_get_queue(raid_bio->bi_bdev),
raid_bio, 0);
bio_endio(raid_bio, 0);
}
if (atomic_dec_and_test(&conf->active_aligned_reads))
wake_up(&conf->wait_for_stripe);
return handled;

View File

@@ -610,7 +610,7 @@ static void mb86a20s_layer_bitrate(struct dvb_frontend *fe, u32 layer,
__func__, 'A' + layer, segment * isdbt_rate[m][f][i]/1000,
rate, rate);
state->estimated_rate[i] = rate;
state->estimated_rate[layer] = rate;
}

View File

@@ -461,7 +461,7 @@ int cx25821_video_register(struct cx25821_dev *dev)
spin_lock_init(&dev->slock);
for (i = 0; i < MAX_VID_CHANNEL_NUM - 1; ++i) {
for (i = 0; i < VID_CHANNEL_NUM; ++i) {
cx25821_init_controls(dev, i);
cx25821_risc_stopper(dev->pci, &dev->channels[i].vidq.stopper,

View File

@@ -1123,33 +1123,6 @@ static unsigned long mtdchar_get_unmapped_area(struct file *file,
}
#endif
static inline unsigned long get_vm_size(struct vm_area_struct *vma)
{
return vma->vm_end - vma->vm_start;
}
static inline resource_size_t get_vm_offset(struct vm_area_struct *vma)
{
return (resource_size_t) vma->vm_pgoff << PAGE_SHIFT;
}
/*
* Set a new vm offset.
*
* Verify that the incoming offset really works as a page offset,
* and that the offset and size fit in a resource_size_t.
*/
static inline int set_vm_offset(struct vm_area_struct *vma, resource_size_t off)
{
pgoff_t pgoff = off >> PAGE_SHIFT;
if (off != (resource_size_t) pgoff << PAGE_SHIFT)
return -EINVAL;
if (off + get_vm_size(vma) - 1 < off)
return -EINVAL;
vma->vm_pgoff = pgoff;
return 0;
}
/*
* set up a mapping for shared memory segments
*/
@@ -1159,45 +1132,17 @@ static int mtdchar_mmap(struct file *file, struct vm_area_struct *vma)
struct mtd_file_info *mfi = file->private_data;
struct mtd_info *mtd = mfi->mtd;
struct map_info *map = mtd->priv;
resource_size_t start, off;
unsigned long len, vma_len;
/* This is broken because it assumes the MTD device is map-based
and that mtd->priv is a valid struct map_info. It should be
replaced with something that uses the mtd_get_unmapped_area()
operation properly. */
if (0 /*mtd->type == MTD_RAM || mtd->type == MTD_ROM*/) {
off = get_vm_offset(vma);
start = map->phys;
len = PAGE_ALIGN((start & ~PAGE_MASK) + map->size);
start &= PAGE_MASK;
vma_len = get_vm_size(vma);
/* Overflow in off+len? */
if (vma_len + off < off)
return -EINVAL;
/* Does it fit in the mapping? */
if (vma_len + off > len)
return -EINVAL;
off += start;
/* Did that overflow? */
if (off < start)
return -EINVAL;
if (set_vm_offset(vma, off) < 0)
return -EINVAL;
vma->vm_flags |= VM_IO | VM_DONTEXPAND | VM_DONTDUMP;
#ifdef pgprot_noncached
if (file->f_flags & O_DSYNC || off >= __pa(high_memory))
if (file->f_flags & O_DSYNC || map->phys >= __pa(high_memory))
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
#endif
if (io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
vma->vm_end - vma->vm_start,
vma->vm_page_prot))
return -EAGAIN;
return 0;
return vm_iomap_memory(vma, map->phys, map->size);
}
return -ENOSYS;
#else

View File

@@ -846,8 +846,10 @@ static void bond_mc_swap(struct bonding *bond, struct slave *new_active,
if (bond->dev->flags & IFF_ALLMULTI)
dev_set_allmulti(old_active->dev, -1);
netif_addr_lock_bh(bond->dev);
netdev_for_each_mc_addr(ha, bond->dev)
dev_mc_del(old_active->dev, ha->addr);
netif_addr_unlock_bh(bond->dev);
}
if (new_active) {
@@ -858,8 +860,10 @@ static void bond_mc_swap(struct bonding *bond, struct slave *new_active,
if (bond->dev->flags & IFF_ALLMULTI)
dev_set_allmulti(new_active->dev, 1);
netif_addr_lock_bh(bond->dev);
netdev_for_each_mc_addr(ha, bond->dev)
dev_mc_add(new_active->dev, ha->addr);
netif_addr_unlock_bh(bond->dev);
}
}
@@ -1901,11 +1905,29 @@ err_dest_symlinks:
bond_destroy_slave_symlinks(bond_dev, slave_dev);
err_detach:
if (!USES_PRIMARY(bond->params.mode)) {
netif_addr_lock_bh(bond_dev);
bond_mc_list_flush(bond_dev, slave_dev);
netif_addr_unlock_bh(bond_dev);
}
bond_del_vlans_from_slave(bond, slave_dev);
write_lock_bh(&bond->lock);
bond_detach_slave(bond, new_slave);
if (bond->primary_slave == new_slave)
bond->primary_slave = NULL;
write_unlock_bh(&bond->lock);
if (bond->curr_active_slave == new_slave) {
read_lock(&bond->lock);
write_lock_bh(&bond->curr_slave_lock);
bond_change_active_slave(bond, NULL);
bond_select_active_slave(bond);
write_unlock_bh(&bond->curr_slave_lock);
read_unlock(&bond->lock);
}
slave_disable_netpoll(new_slave);
err_close:
slave_dev->priv_flags &= ~IFF_BONDING;
dev_close(slave_dev);
err_unset_master:
@@ -3168,11 +3190,20 @@ static int bond_slave_netdev_event(unsigned long event,
struct net_device *slave_dev)
{
struct slave *slave = bond_slave_get_rtnl(slave_dev);
struct bonding *bond = slave->bond;
struct net_device *bond_dev = slave->bond->dev;
struct bonding *bond;
struct net_device *bond_dev;
u32 old_speed;
u8 old_duplex;
/* A netdev event can be generated while enslaving a device
* before netdev_rx_handler_register is called in which case
* slave will be NULL
*/
if (!slave)
return NOTIFY_DONE;
bond_dev = slave->bond->dev;
bond = slave->bond;
switch (event) {
case NETDEV_UNREGISTER:
if (bond->setup_by_slave)
@@ -3286,20 +3317,22 @@ static int bond_xmit_hash_policy_l2(struct sk_buff *skb, int count)
*/
static int bond_xmit_hash_policy_l23(struct sk_buff *skb, int count)
{
struct ethhdr *data = (struct ethhdr *)skb->data;
struct iphdr *iph;
struct ipv6hdr *ipv6h;
const struct ethhdr *data;
const struct iphdr *iph;
const struct ipv6hdr *ipv6h;
u32 v6hash;
__be32 *s, *d;
const __be32 *s, *d;
if (skb->protocol == htons(ETH_P_IP) &&
skb_network_header_len(skb) >= sizeof(*iph)) {
pskb_network_may_pull(skb, sizeof(*iph))) {
iph = ip_hdr(skb);
data = (struct ethhdr *)skb->data;
return ((ntohl(iph->saddr ^ iph->daddr) & 0xffff) ^
(data->h_dest[5] ^ data->h_source[5])) % count;
} else if (skb->protocol == htons(ETH_P_IPV6) &&
skb_network_header_len(skb) >= sizeof(*ipv6h)) {
pskb_network_may_pull(skb, sizeof(*ipv6h))) {
ipv6h = ipv6_hdr(skb);
data = (struct ethhdr *)skb->data;
s = &ipv6h->saddr.s6_addr32[0];
d = &ipv6h->daddr.s6_addr32[0];
v6hash = (s[1] ^ d[1]) ^ (s[2] ^ d[2]) ^ (s[3] ^ d[3]);
@@ -3318,33 +3351,36 @@ static int bond_xmit_hash_policy_l23(struct sk_buff *skb, int count)
static int bond_xmit_hash_policy_l34(struct sk_buff *skb, int count)
{
u32 layer4_xor = 0;
struct iphdr *iph;
struct ipv6hdr *ipv6h;
__be32 *s, *d;
__be16 *layer4hdr;
const struct iphdr *iph;
const struct ipv6hdr *ipv6h;
const __be32 *s, *d;
const __be16 *l4 = NULL;
__be16 _l4[2];
int noff = skb_network_offset(skb);
int poff;
if (skb->protocol == htons(ETH_P_IP) &&
skb_network_header_len(skb) >= sizeof(*iph)) {
pskb_may_pull(skb, noff + sizeof(*iph))) {
iph = ip_hdr(skb);
if (!ip_is_fragment(iph) &&
(iph->protocol == IPPROTO_TCP ||
iph->protocol == IPPROTO_UDP) &&
(skb_headlen(skb) - skb_network_offset(skb) >=
iph->ihl * sizeof(u32) + sizeof(*layer4hdr) * 2)) {
layer4hdr = (__be16 *)((u32 *)iph + iph->ihl);
layer4_xor = ntohs(*layer4hdr ^ *(layer4hdr + 1));
poff = proto_ports_offset(iph->protocol);
if (!ip_is_fragment(iph) && poff >= 0) {
l4 = skb_header_pointer(skb, noff + (iph->ihl << 2) + poff,
sizeof(_l4), &_l4);
if (l4)
layer4_xor = ntohs(l4[0] ^ l4[1]);
}
return (layer4_xor ^
((ntohl(iph->saddr ^ iph->daddr)) & 0xffff)) % count;
} else if (skb->protocol == htons(ETH_P_IPV6) &&
skb_network_header_len(skb) >= sizeof(*ipv6h)) {
pskb_may_pull(skb, noff + sizeof(*ipv6h))) {
ipv6h = ipv6_hdr(skb);
if ((ipv6h->nexthdr == IPPROTO_TCP ||
ipv6h->nexthdr == IPPROTO_UDP) &&
(skb_headlen(skb) - skb_network_offset(skb) >=
sizeof(*ipv6h) + sizeof(*layer4hdr) * 2)) {
layer4hdr = (__be16 *)(ipv6h + 1);
layer4_xor = ntohs(*layer4hdr ^ *(layer4hdr + 1));
poff = proto_ports_offset(ipv6h->nexthdr);
if (poff >= 0) {
l4 = skb_header_pointer(skb, noff + sizeof(*ipv6h) + poff,
sizeof(_l4), &_l4);
if (l4)
layer4_xor = ntohs(l4[0] ^ l4[1]);
}
s = &ipv6h->saddr.s6_addr32[0];
d = &ipv6h->daddr.s6_addr32[0];

View File

@@ -929,6 +929,7 @@ static int mcp251x_open(struct net_device *net)
struct mcp251x_priv *priv = netdev_priv(net);
struct spi_device *spi = priv->spi;
struct mcp251x_platform_data *pdata = spi->dev.platform_data;
unsigned long flags;
int ret;
ret = open_candev(net);
@@ -945,9 +946,14 @@ static int mcp251x_open(struct net_device *net)
priv->tx_skb = NULL;
priv->tx_len = 0;
flags = IRQF_ONESHOT;
if (pdata->irq_flags)
flags |= pdata->irq_flags;
else
flags |= IRQF_TRIGGER_FALLING;
ret = request_threaded_irq(spi->irq, NULL, mcp251x_can_ist,
pdata->irq_flags ? pdata->irq_flags : IRQF_TRIGGER_FALLING,
DEVICE_NAME, priv);
flags, DEVICE_NAME, priv);
if (ret) {
dev_err(&spi->dev, "failed to acquire irq %d\n", spi->irq);
if (pdata->transceiver_enable)

View File

@@ -96,8 +96,8 @@ static int sja1000_ofp_probe(struct platform_device *ofdev)
struct net_device *dev;
struct sja1000_priv *priv;
struct resource res;
const u32 *prop;
int err, irq, res_size, prop_size;
u32 prop;
int err, irq, res_size;
void __iomem *base;
err = of_address_to_resource(np, 0, &res);
@@ -138,27 +138,27 @@ static int sja1000_ofp_probe(struct platform_device *ofdev)
priv->read_reg = sja1000_ofp_read_reg;
priv->write_reg = sja1000_ofp_write_reg;
prop = of_get_property(np, "nxp,external-clock-frequency", &prop_size);
if (prop && (prop_size == sizeof(u32)))
priv->can.clock.freq = *prop / 2;
err = of_property_read_u32(np, "nxp,external-clock-frequency", &prop);
if (!err)
priv->can.clock.freq = prop / 2;
else
priv->can.clock.freq = SJA1000_OFP_CAN_CLOCK; /* default */
prop = of_get_property(np, "nxp,tx-output-mode", &prop_size);
if (prop && (prop_size == sizeof(u32)))
priv->ocr |= *prop & OCR_MODE_MASK;
err = of_property_read_u32(np, "nxp,tx-output-mode", &prop);
if (!err)
priv->ocr |= prop & OCR_MODE_MASK;
else
priv->ocr |= OCR_MODE_NORMAL; /* default */
prop = of_get_property(np, "nxp,tx-output-config", &prop_size);
if (prop && (prop_size == sizeof(u32)))
priv->ocr |= (*prop << OCR_TX_SHIFT) & OCR_TX_MASK;
err = of_property_read_u32(np, "nxp,tx-output-config", &prop);
if (!err)
priv->ocr |= (prop << OCR_TX_SHIFT) & OCR_TX_MASK;
else
priv->ocr |= OCR_TX0_PULLDOWN; /* default */
prop = of_get_property(np, "nxp,clock-out-frequency", &prop_size);
if (prop && (prop_size == sizeof(u32)) && *prop) {
u32 divider = priv->can.clock.freq * 2 / *prop;
err = of_property_read_u32(np, "nxp,clock-out-frequency", &prop);
if (!err && prop) {
u32 divider = priv->can.clock.freq * 2 / prop;
if (divider > 1)
priv->cdr |= divider / 2 - 1;
@@ -168,8 +168,7 @@ static int sja1000_ofp_probe(struct platform_device *ofdev)
priv->cdr |= CDR_CLK_OFF; /* default */
}
prop = of_get_property(np, "nxp,no-comparator-bypass", NULL);
if (!prop)
if (!of_property_read_bool(np, "nxp,no-comparator-bypass"))
priv->cdr |= CDR_CBP; /* default */
priv->irq_flags = IRQF_SHARED;

View File

@@ -828,7 +828,7 @@ static int ax_probe(struct platform_device *pdev)
struct ei_device *ei_local;
struct ax_device *ax;
struct resource *irq, *mem, *mem2;
resource_size_t mem_size, mem2_size = 0;
unsigned long mem_size, mem2_size = 0;
int ret = 0;
dev = ax__alloc_ei_netdev(sizeof(struct ax_device));

View File

@@ -2614,6 +2614,9 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
}
}
/* initialize FW coalescing state machines in RAM */
bnx2x_update_coalesce(bp);
/* setup the leading queue */
rc = bnx2x_setup_leading(bp);
if (rc) {
@@ -4580,11 +4583,11 @@ static void storm_memset_hc_disable(struct bnx2x *bp, u8 port,
u32 enable_flag = disable ? 0 : (1 << HC_INDEX_DATA_HC_ENABLED_SHIFT);
u32 addr = BAR_CSTRORM_INTMEM +
CSTORM_STATUS_BLOCK_DATA_FLAGS_OFFSET(fw_sb_id, sb_index);
u16 flags = REG_RD16(bp, addr);
u8 flags = REG_RD8(bp, addr);
/* clear and set */
flags &= ~HC_INDEX_DATA_HC_ENABLED;
flags |= enable_flag;
REG_WR16(bp, addr, flags);
REG_WR8(bp, addr, flags);
DP(NETIF_MSG_IFUP,
"port %x fw_sb_id %d sb_index %d disable %d\n",
port, fw_sb_id, sb_index, disable);

Some files were not shown because too many files have changed in this diff Show More