Linux 3.6-rc4

Andreas Bombe reported that the added ktime_t overflow checking added to
timespec_valid in commit 4e8b14526c ("time: Improve sanity checking of
timekeeping inputs") was causing problems with X.org because it caused
timeouts larger then KTIME_T to be invalid.

Previously, these large timeouts would be clamped to KTIME_MAX and would
never expire, which is valid.

This patch splits the ktime_t overflow checking into a new
timespec_valid_strict function, and converts the timekeeping codes
internal checking to use this more strict function.

Reported-and-tested-by: Andreas Bombe <aeb@debian.org>
Cc: Zhouping Liu <zliu@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation/ABI/testing/sysfs-platform-ideapad-laptop

@@ -5,4 +5,15 @@ Contact:	"Ike Panhc <ike.pan@canonical.com>"
 Description:
 		Control the power of camera module. 1 means on, 0 means off.
 
+What:		/sys/devices/platform/ideapad/fan_mode
+Date:		June 2012
+KernelVersion:	3.6
+Contact:	"Maxim Mikityanskiy <maxtram95@gmail.com>"
+Description:
+		Change fan mode
+		There are four available modes:
+			* 0 -> Super Silent Mode
+			* 1 -> Standard Mode
+			* 2 -> Dust Cleaning
+			* 4 -> Efficient Thermal Dissipation Mode
 

Documentation/DocBook/media/v4l/vidioc-g-tuner.xml

@@ -125,7 +125,7 @@ the structure refers to a radio tuner the
 <constant>V4L2_TUNER_CAP_NORM</constant> flags can't be used.</para>
 <para>If multiple frequency bands are supported, then
 <structfield>capability</structfield> is the union of all
-<structfield>capability></structfield> fields of each &v4l2-frequency-band;.
+<structfield>capability</structfield> fields of each &v4l2-frequency-band;.
 </para></entry>
 	  </row>
 	  <row>

Documentation/block/00-INDEX

@@ -3,15 +3,21 @@
 biodoc.txt
 	- Notes on the Generic Block Layer Rewrite in Linux 2.5
 capability.txt
-	- Generic Block Device Capability (/sys/block/<disk>/capability)
+	- Generic Block Device Capability (/sys/block/<device>/capability)
+cfq-iosched.txt
+	- CFQ IO scheduler tunables
+data-integrity.txt
+	- Block data integrity
 deadline-iosched.txt
 	- Deadline IO scheduler tunables
 ioprio.txt
 	- Block io priorities (in CFQ scheduler)
+queue-sysfs.txt
+	- Queue's sysfs entries
 request.txt
 	- The members of struct request (in include/linux/blkdev.h)
 stat.txt
-	- Block layer statistics in /sys/block/<dev>/stat
+	- Block layer statistics in /sys/block/<device>/stat
 switching-sched.txt
 	- Switching I/O schedulers at runtime
 writeback_cache_control.txt

Documentation/block/cfq-iosched.txt

@@ -1,3 +1,14 @@
+CFQ (Complete Fairness Queueing)
+===============================
+
+The main aim of CFQ scheduler is to provide a fair allocation of the disk
+I/O bandwidth for all the processes which requests an I/O operation.
+
+CFQ maintains the per process queue for the processes which request I/O
+operation(syncronous requests). In case of asynchronous requests, all the
+requests from all the processes are batched together according to their
+process's I/O priority.
+
 CFQ ioscheduler tunables
 ========================
 
@@ -25,6 +36,72 @@ there are multiple spindles behind single LUN (Host based hardware RAID
 controller or for storage arrays), setting slice_idle=0 might end up in better
 throughput and acceptable latencies.
 
+back_seek_max
+-------------
+This specifies, given in Kbytes, the maximum "distance" for backward seeking.
+The distance is the amount of space from the current head location to the
+sectors that are backward in terms of distance.
+
+This parameter allows the scheduler to anticipate requests in the "backward"
+direction and consider them as being the "next" if they are within this
+distance from the current head location.
+
+back_seek_penalty
+-----------------
+This parameter is used to compute the cost of backward seeking. If the
+backward distance of request is just 1/back_seek_penalty from a "front"
+request, then the seeking cost of two requests is considered equivalent.
+
+So scheduler will not bias toward one or the other request (otherwise scheduler
+will bias toward front request). Default value of back_seek_penalty is 2.
+
+fifo_expire_async
+-----------------
+This parameter is used to set the timeout of asynchronous requests. Default
+value of this is 248ms.
+
+fifo_expire_sync
+----------------
+This parameter is used to set the timeout of synchronous requests. Default
+value of this is 124ms. In case to favor synchronous requests over asynchronous
+one, this value should be decreased relative to fifo_expire_async.
+
+slice_async
+-----------
+This parameter is same as of slice_sync but for asynchronous queue. The
+default value is 40ms.
+
+slice_async_rq
+--------------
+This parameter is used to limit the dispatching of asynchronous request to
+device request queue in queue's slice time. The maximum number of request that
+are allowed to be dispatched also depends upon the io priority. Default value
+for this is 2.
+
+slice_sync
+----------
+When a queue is selected for execution, the queues IO requests are only
+executed for a certain amount of time(time_slice) before switching to another
+queue. This parameter is used to calculate the time slice of synchronous
+queue.
+
+time_slice is computed using the below equation:-
+time_slice = slice_sync + (slice_sync/5 * (4 - prio)). To increase the
+time_slice of synchronous queue, increase the value of slice_sync. Default
+value is 100ms.
+
+quantum
+-------
+This specifies the number of request dispatched to the device queue. In a
+queue's time slice, a request will not be dispatched if the number of request
+in the device exceeds this parameter. This parameter is used for synchronous
+request.
+
+In case of storage with several disk, this setting can limit the parallel
+processing of request. Therefore, increasing the value can imporve the
+performace although this can cause the latency of some I/O to increase due
+to more number of requests.
+
 CFQ IOPS Mode for group scheduling
 ===================================
 Basic CFQ design is to provide priority based time slices. Higher priority

Documentation/block/queue-sysfs.txt

@@ -9,20 +9,71 @@ These files are the ones found in the /sys/block/xxx/queue/ directory.
 Files denoted with a RO postfix are readonly and the RW postfix means
 read-write.
 
+add_random (RW)
+----------------
+This file allows to trun off the disk entropy contribution. Default
+value of this file is '1'(on).
+
+discard_granularity (RO)
+-----------------------
+This shows the size of internal allocation of the device in bytes, if
+reported by the device. A value of '0' means device does not support
+the discard functionality.
+
+discard_max_bytes (RO)
+----------------------
+Devices that support discard functionality may have internal limits on
+the number of bytes that can be trimmed or unmapped in a single operation.
+The discard_max_bytes parameter is set by the device driver to the maximum
+number of bytes that can be discarded in a single operation. Discard
+requests issued to the device must not exceed this limit. A discard_max_bytes
+value of 0 means that the device does not support discard functionality.
+
+discard_zeroes_data (RO)
+------------------------
+When read, this file will show if the discarded block are zeroed by the
+device or not. If its value is '1' the blocks are zeroed otherwise not.
+
 hw_sector_size (RO)
 -------------------
 This is the hardware sector size of the device, in bytes.
 
+iostats (RW)
+-------------
+This file is used to control (on/off) the iostats accounting of the
+disk.
+
+logical_block_size (RO)
+-----------------------
+This is the logcal block size of the device, in bytes.
+
 max_hw_sectors_kb (RO)
 ----------------------
 This is the maximum number of kilobytes supported in a single data transfer.
 
+max_integrity_segments (RO)
+---------------------------
+When read, this file shows the max limit of integrity segments as
+set by block layer which a hardware controller can handle.
+
 max_sectors_kb (RW)
 -------------------
 This is the maximum number of kilobytes that the block layer will allow
 for a filesystem request. Must be smaller than or equal to the maximum
 size allowed by the hardware.
 
+max_segments (RO)
+-----------------
+Maximum number of segments of the device.
+
+max_segment_size (RO)
+---------------------
+Maximum segment size of the device.
+
+minimum_io_size (RO)
+--------------------
+This is the smallest preferred io size reported by the device.
+
 nomerges (RW)
 -------------
 This enables the user to disable the lookup logic involved with IO
@@ -45,11 +96,24 @@ per-block-cgroup request pool.  IOW, if there are N block cgroups,
 each request queue may have upto N request pools, each independently
 regulated by nr_requests.
 
+optimal_io_size (RO)
+--------------------
+This is the optimal io size reported by the device.
+
+physical_block_size (RO)
+------------------------
+This is the physical block size of device, in bytes.
+
 read_ahead_kb (RW)
 ------------------
 Maximum number of kilobytes to read-ahead for filesystems on this block
 device.
 
+rotational (RW)
+---------------
+This file is used to stat if the device is of rotational type or
+non-rotational type.
+
 rq_affinity (RW)
 ----------------
 If this option is '1', the block layer will migrate request completions to the

Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt

@@ -10,8 +10,8 @@ Required properties:
 - compatible : Should be "fsl,<chip>-esdhc"
 
 Optional properties:
-- fsl,cd-internal : Indicate to use controller internal card detection
-- fsl,wp-internal : Indicate to use controller internal write protection
+- fsl,cd-controller : Indicate to use controller internal card detection
+- fsl,wp-controller : Indicate to use controller internal write protection
 
 Examples:
 
@@ -19,8 +19,8 @@ esdhc@70004000 {
 	compatible = "fsl,imx51-esdhc";
 	reg = <0x70004000 0x4000>;
 	interrupts = <1>;
-	fsl,cd-internal;
-	fsl,wp-internal;
+	fsl,cd-controller;
+	fsl,wp-controller;
 };
 
 esdhc@70008000 {

Documentation/devicetree/bindings/regulator/tps6586x.txt

@@ -9,9 +9,9 @@ Required properties:
 - regulators: list of regulators provided by this controller, must have
   property "regulator-compatible" to match their hardware counterparts:
   sm[0-2], ldo[0-9] and ldo_rtc
-- sm0-supply: The input supply for the SM0.
-- sm1-supply: The input supply for the SM1.
-- sm2-supply: The input supply for the SM2.
+- vin-sm0-supply: The input supply for the SM0.
+- vin-sm1-supply: The input supply for the SM1.
+- vin-sm2-supply: The input supply for the SM2.
 - vinldo01-supply: The input supply for the LDO1 and LDO2
 - vinldo23-supply: The input supply for the LDO2 and LDO3
 - vinldo4-supply: The input supply for the LDO4
@@ -30,9 +30,9 @@ Example:
 		#gpio-cells = <2>;
 		gpio-controller;
 
-		sm0-supply = <&some_reg>;
-		sm1-supply = <&some_reg>;
-		sm2-supply = <&some_reg>;
+		vin-sm0-supply = <&some_reg>;
+		vin-sm1-supply = <&some_reg>;
+		vin-sm2-supply = <&some_reg>;
 		vinldo01-supply = <...>;
 		vinldo23-supply = <...>;
 		vinldo4-supply = <...>;

Documentation/filesystems/vfat.txt

@@ -137,6 +137,17 @@ errors=panic|continue|remount-ro
 		 without doing anything or remount the partition in
 		 read-only mode (default behavior).
 
+discard       -- If set, issues discard/TRIM commands to the block
+		 device when blocks are freed. This is useful for SSD devices
+		 and sparse/thinly-provisoned LUNs.
+
+nfs           -- This option maintains an index (cache) of directory
+		 inodes by i_logstart which is used by the nfs-related code to
+		 improve look-ups.
+
+		 Enable this only if you want to export the FAT filesystem
+		 over NFS
+
 <bool>: 0,1,yes,no,true,false
 
 TODO

Documentation/networking/netconsole.txt

@@ -51,8 +51,23 @@ Built-in netconsole starts immediately after the TCP stack is
 initialized and attempts to bring up the supplied dev at the supplied
 address.
 
-The remote host can run either 'netcat -u -l -p <port>',
-'nc -l -u <port>' or syslogd.
+The remote host has several options to receive the kernel messages,
+for example:
+
+1) syslogd
+
+2) netcat
+
+   On distributions using a BSD-based netcat version (e.g. Fedora,
+   openSUSE and Ubuntu) the listening port must be specified without
+   the -p switch:
+
+   'nc -u -l -p <port>' / 'nc -u -l <port>' or
+   'netcat -u -l -p <port>' / 'netcat -u -l <port>'
+
+3) socat
+
+   'socat udp-recv:<port> -'
 
 Dynamic reconfiguration:
 ========================

Documentation/pinctrl.txt

@@ -840,9 +840,9 @@ static unsigned long i2c_pin_configs[] = {
 
 static struct pinctrl_map __initdata mapping[] = {
 	PIN_MAP_MUX_GROUP("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0", "i2c0"),
-	PIN_MAP_MUX_CONFIGS_GROUP("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0", i2c_grp_configs),
-	PIN_MAP_MUX_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0scl", i2c_pin_configs),
-	PIN_MAP_MUX_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0sda", i2c_pin_configs),
+	PIN_MAP_CONFIGS_GROUP("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0", i2c_grp_configs),
+	PIN_MAP_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0scl", i2c_pin_configs),
+	PIN_MAP_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0sda", i2c_pin_configs),
 };
 
 Finally, some devices expect the mapping table to contain certain specific

Documentation/vm/hugetlbpage.txt

@@ -299,11 +299,17 @@ map_hugetlb.c.
 *******************************************************************
 
 /*
- * hugepage-shm:  see Documentation/vm/hugepage-shm.c
+ * map_hugetlb: see tools/testing/selftests/vm/map_hugetlb.c
  */
 
 *******************************************************************
 
 /*
- * hugepage-mmap:  see Documentation/vm/hugepage-mmap.c
+ * hugepage-shm:  see tools/testing/selftests/vm/hugepage-shm.c
+ */
+
+*******************************************************************
+
+/*
+ * hugepage-mmap:  see tools/testing/selftests/vm/hugepage-mmap.c
  */

Documentation/w1/slaves/w1_therm

@@ -3,6 +3,7 @@ Kernel driver w1_therm
 
 Supported chips:
   * Maxim ds18*20 based temperature sensors.
+  * Maxim ds1825 based temperature sensors.
 
 Author: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
 
@@ -15,6 +16,7 @@ supported family codes:
 W1_THERM_DS18S20	0x10
 W1_THERM_DS1822		0x22
 W1_THERM_DS18B20	0x28
+W1_THERM_DS1825		0x3B
 
 Support is provided through the sysfs w1_slave file.  Each open and
 read sequence will initiate a temperature conversion then provide two

Documentation/watchdog/src/watchdog-test.c

@@ -31,7 +31,7 @@ static void keep_alive(void)
  * or "-e" to enable the card.
  */
 
-void term(int sig)
+static void term(int sig)
 {
     close(fd);
     fprintf(stderr, "Stopping watchdog ticks...\n");

MAINTAINERS

@@ -2217,7 +2217,7 @@ S:	Maintained
 F:	drivers/scsi/tmscsim.*
 
 DC395x SCSI driver
-M:	Oliver Neukum <oliver@neukum.name>
+M:	Oliver Neukum <oliver@neukum.org>
 M:	Ali Akcaagac <aliakc@web.de>
 M:	Jamie Lenehan <lenehan@twibble.org>
 W:	http://twibble.org/dist/dc395x/
@@ -4537,7 +4537,7 @@ S:	Supported
 F:	arch/microblaze/
 
 MICROTEK X6 SCANNER
-M:	Oliver Neukum <oliver@neukum.name>
+M:	Oliver Neukum <oliver@neukum.org>
 S:	Maintained
 F:	drivers/usb/image/microtek.*
 
@@ -7076,7 +7076,7 @@ F:	include/linux/mtd/ubi.h
 F:	include/mtd/ubi-user.h
 
 USB ACM DRIVER
-M:	Oliver Neukum <oliver@neukum.name>
+M:	Oliver Neukum <oliver@neukum.org>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	Documentation/usb/acm.txt
@@ -7097,7 +7097,7 @@ S:	Supported
 F:	drivers/block/ub.c
 
 USB CDC ETHERNET DRIVER
-M:	Oliver Neukum <oliver@neukum.name>
+M:	Oliver Neukum <oliver@neukum.org>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/net/usb/cdc_*.c
@@ -7170,7 +7170,7 @@ F:	drivers/usb/host/isp116x*
 F:	include/linux/usb/isp116x.h
 
 USB KAWASAKI LSI DRIVER
-M:	Oliver Neukum <oliver@neukum.name>
+M:	Oliver Neukum <oliver@neukum.org>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/serial/kl5kusb105.*
@@ -7288,6 +7288,12 @@ W:	http://www.connecttech.com
 S:	Supported
 F:	drivers/usb/serial/whiteheat*
 
+USB SMSC75XX ETHERNET DRIVER
+M:	Steve Glendinning <steve.glendinning@shawell.net>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/usb/smsc75xx.*
+
 USB SMSC95XX ETHERNET DRIVER
 M:	Steve Glendinning <steve.glendinning@shawell.net>
 L:	netdev@vger.kernel.org
@@ -7670,23 +7676,28 @@ S:	Supported
 F:	Documentation/hwmon/wm83??
 F:	arch/arm/mach-s3c64xx/mach-crag6410*
 F:	drivers/clk/clk-wm83*.c
+F:	drivers/extcon/extcon-arizona.c
 F:	drivers/leds/leds-wm83*.c
 F:	drivers/gpio/gpio-*wm*.c
+F:	drivers/gpio/gpio-arizona.c
 F:	drivers/hwmon/wm83??-hwmon.c
 F:	drivers/input/misc/wm831x-on.c
 F:	drivers/input/touchscreen/wm831x-ts.c
 F:	drivers/input/touchscreen/wm97*.c
-F:	drivers/mfd/wm8*.c
+F:	drivers/mfd/arizona*
+F:	drivers/mfd/wm*.c
 F:	drivers/power/wm83*.c
 F:	drivers/rtc/rtc-wm83*.c
 F:	drivers/regulator/wm8*.c
 F:	drivers/video/backlight/wm83*_bl.c
 F:	drivers/watchdog/wm83*_wdt.c
+F:	include/linux/mfd/arizona/
 F:	include/linux/mfd/wm831x/
 F:	include/linux/mfd/wm8350/
 F:	include/linux/mfd/wm8400*
 F:	include/linux/wm97xx.h
 F:	include/sound/wm????.h
+F:	sound/soc/codecs/arizona.?
 F:	sound/soc/codecs/wm*
 
 WORKQUEUE

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 6
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc4
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/alpha/Kconfig

@@ -18,6 +18,8 @@ config ALPHA
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_CMOS_UPDATE
+	select GENERIC_STRNCPY_FROM_USER
+	select GENERIC_STRNLEN_USER
 	help
 	  The Alpha is a 64-bit general-purpose processor designed and
 	  marketed by the Digital Equipment Corporation of blessed memory,

arch/alpha/include/asm/atomic.h

@@ -14,8 +14,8 @@
  */
 
 
-#define ATOMIC_INIT(i)		( (atomic_t) { (i) } )
-#define ATOMIC64_INIT(i)	( (atomic64_t) { (i) } )
+#define ATOMIC_INIT(i)		{ (i) }
+#define ATOMIC64_INIT(i)	{ (i) }
 
 #define atomic_read(v)		(*(volatile int *)&(v)->counter)
 #define atomic64_read(v)	(*(volatile long *)&(v)->counter)

arch/alpha/include/asm/fpu.h

@@ -1,7 +1,9 @@
 #ifndef __ASM_ALPHA_FPU_H
 #define __ASM_ALPHA_FPU_H
 
+#ifdef __KERNEL__
 #include <asm/special_insns.h>
+#endif
 
 /*
  * Alpha floating-point control register defines:

arch/alpha/include/asm/ptrace.h

@@ -76,7 +76,10 @@ struct switch_stack {
 #define task_pt_regs(task) \
   ((struct pt_regs *) (task_stack_page(task) + 2*PAGE_SIZE) - 1)
 
-#define force_successful_syscall_return() (task_pt_regs(current)->r0 = 0)
+#define current_pt_regs() \
+  ((struct pt_regs *) ((char *)current_thread_info() + 2*PAGE_SIZE) - 1)
+
+#define force_successful_syscall_return() (current_pt_regs()->r0 = 0)
 
 #endif
 

arch/alpha/include/asm/socket.h

@@ -76,9 +76,11 @@
 /* Instruct lower device to use last 4-bytes of skb data as FCS */
 #define SO_NOFCS		43
 
+#ifdef __KERNEL__
 /* O_NONBLOCK clashes with the bits used for socket types.  Therefore we
  * have to define SOCK_NONBLOCK to a different value here.
  */
 #define SOCK_NONBLOCK	0x40000000
+#endif /* __KERNEL__ */
 
 #endif /* _ASM_SOCKET_H */

arch/alpha/include/asm/uaccess.h

@@ -433,36 +433,12 @@ clear_user(void __user *to, long len)
 #undef __module_address
 #undef __module_call
 
-/* Returns: -EFAULT if exception before terminator, N if the entire
-   buffer filled, else strlen.  */
+#define user_addr_max() \
+        (segment_eq(get_fs(), USER_DS) ? TASK_SIZE : ~0UL)
 
-extern long __strncpy_from_user(char *__to, const char __user *__from, long __to_len);
-
-extern inline long
-strncpy_from_user(char *to, const char __user *from, long n)
-{
-	long ret = -EFAULT;
-	if (__access_ok((unsigned long)from, 0, get_fs()))
-		ret = __strncpy_from_user(to, from, n);
-	return ret;
-}
-
-/* Returns: 0 if bad, string length+1 (memory size) of string if ok */
-extern long __strlen_user(const char __user *);
-
-extern inline long strlen_user(const char __user *str)
-{
-	return access_ok(VERIFY_READ,str,0) ? __strlen_user(str) : 0;
-}
-
-/* Returns: 0 if exception before NUL or reaching the supplied limit (N),
- * a value greater than N if the limit would be exceeded, else strlen.  */
-extern long __strnlen_user(const char __user *, long);
-
-extern inline long strnlen_user(const char __user *str, long n)
-{
-	return access_ok(VERIFY_READ,str,0) ? __strnlen_user(str, n) : 0;
-}
+extern long strncpy_from_user(char *dest, const char __user *src, long count);
+extern __must_check long strlen_user(const char __user *str);
+extern __must_check long strnlen_user(const char __user *str, long n);
 
 /*
  * About the exception table:

arch/alpha/include/asm/unistd.h

@@ -465,10 +465,12 @@
 #define __NR_setns			501
 #define __NR_accept4			502
 #define __NR_sendmmsg			503
+#define __NR_process_vm_readv		504
+#define __NR_process_vm_writev		505
 
 #ifdef __KERNEL__
 
-#define NR_SYSCALLS			504
+#define NR_SYSCALLS			506
 
 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_STAT64

arch/alpha/include/asm/word-at-a-time.h

@@ -0,0 +1,55 @@
+#ifndef _ASM_WORD_AT_A_TIME_H
+#define _ASM_WORD_AT_A_TIME_H
+
+#include <asm/compiler.h>
+
+/*
+ * word-at-a-time interface for Alpha.
+ */
+
+/*
+ * We do not use the word_at_a_time struct on Alpha, but it needs to be
+ * implemented to humour the generic code.
+ */
+struct word_at_a_time {
+	const unsigned long unused;
+};
+
+#define WORD_AT_A_TIME_CONSTANTS { 0 }
+
+/* Return nonzero if val has a zero */
+static inline unsigned long has_zero(unsigned long val, unsigned long *bits, const struct word_at_a_time *c)
+{
+	unsigned long zero_locations = __kernel_cmpbge(0, val);
+	*bits = zero_locations;
+	return zero_locations;
+}
+
+static inline unsigned long prep_zero_mask(unsigned long val, unsigned long bits, const struct word_at_a_time *c)
+{
+	return bits;
+}
+
+#define create_zero_mask(bits) (bits)
+
+static inline unsigned long find_zero(unsigned long bits)
+{
+#if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
+	/* Simple if have CIX instructions */
+	return __kernel_cttz(bits);
+#else
+	unsigned long t1, t2, t3;
+	/* Retain lowest set bit only */
+	bits &= -bits;
+	/* Binary search for lowest set bit */
+	t1 = bits & 0xf0;
+	t2 = bits & 0xcc;
+	t3 = bits & 0xaa;
+	if (t1) t1 = 4;
+	if (t2) t2 = 2;
+	if (t3) t3 = 1;
+	return t1 + t2 + t3;
+#endif
+}
+
+#endif /* _ASM_WORD_AT_A_TIME_H */

arch/alpha/kernel/alpha_ksyms.c

@@ -52,7 +52,6 @@ EXPORT_SYMBOL(alpha_write_fp_reg_s);
 
 /* entry.S */
 EXPORT_SYMBOL(kernel_thread);
-EXPORT_SYMBOL(kernel_execve);
 
 /* Networking helper routines. */
 EXPORT_SYMBOL(csum_tcpudp_magic);
@@ -74,8 +73,6 @@ EXPORT_SYMBOL(alpha_fp_emul);
  */
 EXPORT_SYMBOL(__copy_user);
 EXPORT_SYMBOL(__do_clear_user);
-EXPORT_SYMBOL(__strncpy_from_user);
-EXPORT_SYMBOL(__strnlen_user);
 
 /* 
  * SMP-specific symbols.

arch/alpha/kernel/entry.S

@@ -663,58 +663,6 @@ kernel_thread:
 	br	ret_to_kernel
 .end kernel_thread
 
-/*
- * kernel_execve(path, argv, envp)
- */
-	.align	4
-	.globl	kernel_execve
-	.ent	kernel_execve
-kernel_execve:
-	/* We can be called from a module.  */
-	ldgp	$gp, 0($27)
-	lda	$sp, -(32+SIZEOF_PT_REGS+8)($sp)
-	.frame	$sp, 32+SIZEOF_PT_REGS+8, $26, 0
-	stq	$26, 0($sp)
-	stq	$16, 8($sp)
-	stq	$17, 16($sp)
-	stq	$18, 24($sp)
-	.prologue 1
-
-	lda	$16, 32($sp)
-	lda	$17, 0
-	lda	$18, SIZEOF_PT_REGS
-	bsr	$26, memset		!samegp
-
-	/* Avoid the HAE being gratuitously wrong, which would cause us
-	   to do the whole turn off interrupts thing and restore it.  */
-	ldq	$2, alpha_mv+HAE_CACHE
-	stq	$2, 152+32($sp)
-
-	ldq	$16, 8($sp)
-	ldq	$17, 16($sp)
-	ldq	$18, 24($sp)
-	lda	$19, 32($sp)
-	bsr	$26, do_execve		!samegp
-
-	ldq	$26, 0($sp)
-	bne	$0, 1f			/* error! */
-
-	/* Move the temporary pt_regs struct from its current location
-	   to the top of the kernel stack frame.  See copy_thread for
-	   details for a normal process.  */
-	lda	$16, 0x4000 - SIZEOF_PT_REGS($8)
-	lda	$17, 32($sp)
-	lda	$18, SIZEOF_PT_REGS
-	bsr	$26, memmove		!samegp
-
-	/* Take that over as our new stack frame and visit userland!  */
-	lda	$sp, 0x4000 - SIZEOF_PT_REGS($8)
-	br	$31, ret_from_sys_call
-
-1:	lda	$sp, 32+SIZEOF_PT_REGS+8($sp)
-	ret
-.end kernel_execve
-
 
 /*
  * Special system calls.  Most of these are special in that they either
@@ -796,115 +744,6 @@ sys_rt_sigreturn:
 	br	ret_from_sys_call
 .end sys_rt_sigreturn
 
-	.align	4
-	.globl	sys_sethae
-	.ent	sys_sethae
-sys_sethae:
-	.prologue 0
-	stq	$16, 152($sp)
-	ret
-.end sys_sethae
-
-	.align	4
-	.globl	osf_getpriority
-	.ent	osf_getpriority
-osf_getpriority:
-	lda	$sp, -16($sp)
-	stq	$26, 0($sp)
-	.prologue 0
-
-	jsr	$26, sys_getpriority
-
-	ldq	$26, 0($sp)
-	blt	$0, 1f
-
-	/* Return value is the unbiased priority, i.e. 20 - prio.
-	   This does result in negative return values, so signal
-	   no error by writing into the R0 slot.  */
-	lda	$1, 20
-	stq	$31, 16($sp)
-	subl	$1, $0, $0
-	unop
-
-1:	lda	$sp, 16($sp)
-	ret
-.end osf_getpriority
-
-	.align	4
-	.globl	sys_getxuid
-	.ent	sys_getxuid
-sys_getxuid:
-	.prologue 0
-	ldq	$2, TI_TASK($8)
-	ldq	$3, TASK_CRED($2)
-	ldl	$0, CRED_UID($3)
-	ldl	$1, CRED_EUID($3)
-	stq	$1, 80($sp)
-	ret
-.end sys_getxuid
-
-	.align	4
-	.globl	sys_getxgid
-	.ent	sys_getxgid
-sys_getxgid:
-	.prologue 0
-	ldq	$2, TI_TASK($8)
-	ldq	$3, TASK_CRED($2)
-	ldl	$0, CRED_GID($3)
-	ldl	$1, CRED_EGID($3)
-	stq	$1, 80($sp)
-	ret
-.end sys_getxgid
-
-	.align	4
-	.globl	sys_getxpid
-	.ent	sys_getxpid
-sys_getxpid:
-	.prologue 0
-	ldq	$2, TI_TASK($8)
-
-	/* See linux/kernel/timer.c sys_getppid for discussion
-	   about this loop.  */
-	ldq	$3, TASK_GROUP_LEADER($2)
-	ldq	$4, TASK_REAL_PARENT($3)
-	ldl	$0, TASK_TGID($2)
-1:	ldl	$1, TASK_TGID($4)
-#ifdef CONFIG_SMP
-	mov	$4, $5
-	mb
-	ldq	$3, TASK_GROUP_LEADER($2)
-	ldq	$4, TASK_REAL_PARENT($3)
-	cmpeq	$4, $5, $5
-	beq	$5, 1b
-#endif
-	stq	$1, 80($sp)
-	ret
-.end sys_getxpid
-
-	.align	4
-	.globl	sys_alpha_pipe
-	.ent	sys_alpha_pipe
-sys_alpha_pipe:
-	lda	$sp, -16($sp)
-	stq	$26, 0($sp)
-	.prologue 0
-
-	mov	$31, $17
-	lda	$16, 8($sp)
-	jsr	$26, do_pipe_flags
-
-	ldq	$26, 0($sp)
-	bne	$0, 1f
-
-	/* The return values are in $0 and $20.  */
-	ldl	$1, 12($sp)
-	ldl	$0, 8($sp)
-
-	stq	$1, 80+16($sp)
-1:	lda	$sp, 16($sp)
-	ret
-.end sys_alpha_pipe
-
 	.align	4
 	.globl	sys_execve
 	.ent	sys_execve

arch/alpha/kernel/osf_sys.c

@@ -1404,3 +1404,52 @@ SYSCALL_DEFINE3(osf_writev, unsigned long, fd,
 }
 
 #endif
+
+SYSCALL_DEFINE2(osf_getpriority, int, which, int, who)
+{
+	int prio = sys_getpriority(which, who);
+	if (prio >= 0) {
+		/* Return value is the unbiased priority, i.e. 20 - prio.
+		   This does result in negative return values, so signal
+		   no error */
+		force_successful_syscall_return();
+		prio = 20 - prio;
+	}
+	return prio;
+}
+
+SYSCALL_DEFINE0(getxuid)
+{
+	current_pt_regs()->r20 = sys_geteuid();
+	return sys_getuid();
+}
+
+SYSCALL_DEFINE0(getxgid)
+{
+	current_pt_regs()->r20 = sys_getegid();
+	return sys_getgid();
+}
+
+SYSCALL_DEFINE0(getxpid)
+{
+	current_pt_regs()->r20 = sys_getppid();
+	return sys_getpid();
+}
+
+SYSCALL_DEFINE0(alpha_pipe)
+{
+	int fd[2];
+	int res = do_pipe_flags(fd, 0);
+	if (!res) {
+		/* The return values are in $0 and $20.  */
+		current_pt_regs()->r20 = fd[1];
+		res = fd[0];
+	}
+	return res;
+}
+
+SYSCALL_DEFINE1(sethae, unsigned long, val)
+{
+	current_pt_regs()->hae = val;
+	return 0;
+}

arch/alpha/kernel/process.c

@@ -455,3 +455,22 @@ get_wchan(struct task_struct *p)
 	}
 	return pc;
 }
+
+int kernel_execve(const char *path, const char *const argv[], const char *const envp[])
+{
+	/* Avoid the HAE being gratuitously wrong, which would cause us
+	   to do the whole turn off interrupts thing and restore it.  */
+	struct pt_regs regs = {.hae = alpha_mv.hae_cache};
+	int err = do_execve(path, argv, envp, &regs);
+	if (!err) {
+		struct pt_regs *p = current_pt_regs();
+		/* copy regs to normal position and off to userland we go... */
+		*p = regs;
+		__asm__ __volatile__ (
+			"mov	%0, $sp;"
+			"br	$31, ret_from_sys_call"
+			: : "r"(p));
+	}
+	return err;
+}
+EXPORT_SYMBOL(kernel_execve);

arch/alpha/kernel/systbls.S

@@ -111,7 +111,7 @@ sys_call_table:
 	.quad sys_socket
 	.quad sys_connect
 	.quad sys_accept
-	.quad osf_getpriority			/* 100 */
+	.quad sys_osf_getpriority			/* 100 */
 	.quad sys_send
 	.quad sys_recv
 	.quad sys_sigreturn
@@ -522,6 +522,8 @@ sys_call_table:
 	.quad sys_setns
 	.quad sys_accept4
 	.quad sys_sendmmsg
+	.quad sys_process_vm_readv
+	.quad sys_process_vm_writev		/* 505 */
 
 	.size sys_call_table, . - sys_call_table
 	.type sys_call_table, @object

arch/alpha/lib/Makefile

@@ -31,8 +31,6 @@ lib-y =	__divqu.o __remqu.o __divlu.o __remlu.o \
 	$(ev6-y)memchr.o \
 	$(ev6-y)copy_user.o \
 	$(ev6-y)clear_user.o \
-	$(ev6-y)strncpy_from_user.o \
-	$(ev67-y)strlen_user.o \
 	$(ev6-y)csum_ipv6_magic.o \
 	$(ev6-y)clear_page.o \
 	$(ev6-y)copy_page.o \

arch/alpha/lib/ev6-strncpy_from_user.S

@@ -1,424 +0,0 @@
-/*
- * arch/alpha/lib/ev6-strncpy_from_user.S
- * 21264 version contributed by Rick Gorton <rick.gorton@alpha-processor.com>
- *
- * Just like strncpy except in the return value:
- *
- * -EFAULT       if an exception occurs before the terminator is copied.
- * N             if the buffer filled.
- *
- * Otherwise the length of the string is returned.
- *
- * Much of the information about 21264 scheduling/coding comes from:
- *	Compiler Writer's Guide for the Alpha 21264
- *	abbreviated as 'CWG' in other comments here
- *	ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html
- * Scheduling notation:
- *	E	- either cluster
- *	U	- upper subcluster; U0 - subcluster U0; U1 - subcluster U1
- *	L	- lower subcluster; L0 - subcluster L0; L1 - subcluster L1
- * A bunch of instructions got moved and temp registers were changed
- * to aid in scheduling.  Control flow was also re-arranged to eliminate
- * branches, and to provide longer code sequences to enable better scheduling.
- * A total rewrite (using byte load/stores for start & tail sequences)
- * is desirable, but very difficult to do without a from-scratch rewrite.
- * Save that for the future.
- */
-
-
-#include <asm/errno.h>
-#include <asm/regdef.h>
-
-
-/* Allow an exception for an insn; exit if we get one.  */
-#define EX(x,y...)			\
-	99: x,##y;			\
-	.section __ex_table,"a";	\
-	.long 99b - .;			\
-	lda $31, $exception-99b($0); 	\
-	.previous
-
-
-	.set noat
-	.set noreorder
-	.text
-
-	.globl __strncpy_from_user
-	.ent __strncpy_from_user
-	.frame $30, 0, $26
-	.prologue 0
-
-	.align 4
-__strncpy_from_user:
-	and	a0, 7, t3	# E : find dest misalignment
-	beq	a2, $zerolength	# U :
-
-	/* Are source and destination co-aligned?  */
-	mov	a0, v0		# E : save the string start
-	xor	a0, a1, t4	# E :
-	EX( ldq_u t1, 0(a1) )	# L : Latency=3 load first quadword
-	ldq_u	t0, 0(a0)	# L : load first (partial) aligned dest quadword
-
-	addq	a2, t3, a2	# E : bias count by dest misalignment
-	subq	a2, 1, a3	# E :
-	addq	zero, 1, t10	# E :
-	and	t4, 7, t4	# E : misalignment between the two
-
-	and	a3, 7, t6	# E : number of tail bytes
-	sll	t10, t6, t10	# E : t10 = bitmask of last count byte
-	bne	t4, $unaligned	# U :
-	lda	t2, -1		# E : build a mask against false zero
-
-	/*
-	 * We are co-aligned; take care of a partial first word.
-	 * On entry to this basic block:
-	 * t0 == the first destination word for masking back in
-	 * t1 == the first source word.
-	 */
-
-	srl	a3, 3, a2	# E : a2 = loop counter = (count - 1)/8
-	addq	a1, 8, a1	# E :
-	mskqh	t2, a1, t2	# U :   detection in the src word
-	nop
-
-	/* Create the 1st output word and detect 0's in the 1st input word.  */
-	mskqh	t1, a1, t3	# U :
-	mskql	t0, a1, t0	# U : assemble the first output word
-	ornot	t1, t2, t2	# E :
-	nop
-
-	cmpbge	zero, t2, t8	# E : bits set iff null found
-	or	t0, t3, t0	# E :
-	beq	a2, $a_eoc	# U :
-	bne	t8, $a_eos	# U : 2nd branch in a quad.  Bad.
-
-	/* On entry to this basic block:
-	 * t0 == a source quad not containing a null.
-	 * a0 - current aligned destination address
-	 * a1 - current aligned source address
-	 * a2 - count of quadwords to move.
-	 * NOTE: Loop improvement - unrolling this is going to be
-	 *	a huge win, since we're going to stall otherwise.
-	 *	Fix this later.  For _really_ large copies, look
-	 *	at using wh64 on a look-ahead basis.  See the code
-	 *	in clear_user.S and copy_user.S.
-	 * Presumably, since (a0) and (a1) do not overlap (by C definition)
-	 * Lots of nops here:
-	 *	- Separate loads from stores
-	 *	- Keep it to 1 branch/quadpack so the branch predictor
-	 *	  can train.
-	 */
-$a_loop:
-	stq_u	t0, 0(a0)	# L :
-	addq	a0, 8, a0	# E :
-	nop
-	subq	a2, 1, a2	# E :
-
-	EX( ldq_u t0, 0(a1) )	# L :
-	addq	a1, 8, a1	# E :
-	cmpbge	zero, t0, t8	# E : Stall 2 cycles on t0
-	beq	a2, $a_eoc      # U :
-
-	beq	t8, $a_loop	# U :
-	nop
-	nop
-	nop
-
-	/* Take care of the final (partial) word store.  At this point
-	 * the end-of-count bit is set in t8 iff it applies.
-	 *
-	 * On entry to this basic block we have:
-	 * t0 == the source word containing the null
-	 * t8 == the cmpbge mask that found it.
-	 */
-$a_eos:
-	negq	t8, t12		# E : find low bit set
-	and	t8, t12, t12	# E : 
-
-	/* We're doing a partial word store and so need to combine
-	   our source and original destination words.  */
-	ldq_u	t1, 0(a0)	# L :
-	subq	t12, 1, t6	# E :
-
-	or	t12, t6, t8	# E :
-	zapnot	t0, t8, t0	# U : clear src bytes > null
-	zap	t1, t8, t1	# U : clear dst bytes <= null
-	or	t0, t1, t0	# E :
-
-	stq_u	t0, 0(a0)	# L :
-	br	$finish_up	# L0 :
-	nop
-	nop
-
-	/* Add the end-of-count bit to the eos detection bitmask.  */
-	.align 4
-$a_eoc:
-	or	t10, t8, t8
-	br	$a_eos
-	nop
-	nop
-
-
-/* The source and destination are not co-aligned.  Align the destination
-   and cope.  We have to be very careful about not reading too much and
-   causing a SEGV.  */
-
-	.align 4
-$u_head:
-	/* We know just enough now to be able to assemble the first
-	   full source word.  We can still find a zero at the end of it
-	   that prevents us from outputting the whole thing.
-
-	   On entry to this basic block:
-	   t0 == the first dest word, unmasked
-	   t1 == the shifted low bits of the first source word
-	   t6 == bytemask that is -1 in dest word bytes */
-
-	EX( ldq_u t2, 8(a1) )	# L : load second src word
-	addq	a1, 8, a1	# E :
-	mskql	t0, a0, t0	# U : mask trailing garbage in dst
-	extqh	t2, a1, t4	# U :
-
-	or	t1, t4, t1	# E : first aligned src word complete
-	mskqh	t1, a0, t1	# U : mask leading garbage in src
-	or	t0, t1, t0	# E : first output word complete
-	or	t0, t6, t6	# E : mask original data for zero test
-
-	cmpbge	zero, t6, t8	# E :
-	beq	a2, $u_eocfin	# U :
-	bne	t8, $u_final	# U : bad news - 2nd branch in a quad
-	lda	t6, -1		# E : mask out the bits we have
-
-	mskql	t6, a1, t6	# U :   already seen
-	stq_u	t0, 0(a0)	# L : store first output word
-	or      t6, t2, t2	# E :
-	cmpbge	zero, t2, t8	# E : find nulls in second partial
-
-	addq	a0, 8, a0		# E :
-	subq	a2, 1, a2		# E :
-	bne	t8, $u_late_head_exit	# U :
-	nop
-
-	/* Finally, we've got all the stupid leading edge cases taken care
-	   of and we can set up to enter the main loop.  */
-
-	extql	t2, a1, t1	# U : position hi-bits of lo word
-	EX( ldq_u t2, 8(a1) )	# L : read next high-order source word
-	addq	a1, 8, a1	# E :
-	cmpbge	zero, t2, t8	# E :
-
-	beq	a2, $u_eoc	# U :
-	bne	t8, $u_eos	# U :
-	nop
-	nop
-
-	/* Unaligned copy main loop.  In order to avoid reading too much,
-	   the loop is structured to detect zeros in aligned source words.
-	   This has, unfortunately, effectively pulled half of a loop
-	   iteration out into the head and half into the tail, but it does
-	   prevent nastiness from accumulating in the very thing we want
-	   to run as fast as possible.
-
-	   On entry to this basic block:
-	   t1 == the shifted high-order bits from the previous source word
-	   t2 == the unshifted current source word
-
-	   We further know that t2 does not contain a null terminator.  */
-
-	/*
-	 * Extra nops here:
-	 *	separate load quads from store quads
-	 *	only one branch/quad to permit predictor training
-	 */
-
-	.align 4
-$u_loop:
-	extqh	t2, a1, t0	# U : extract high bits for current word
-	addq	a1, 8, a1	# E :
-	extql	t2, a1, t3	# U : extract low bits for next time
-	addq	a0, 8, a0	# E :
-
-	or	t0, t1, t0	# E : current dst word now complete
-	EX( ldq_u t2, 0(a1) )	# L : load high word for next time
-	subq	a2, 1, a2	# E :
-	nop
-
-	stq_u	t0, -8(a0)	# L : save the current word
-	mov	t3, t1		# E :
-	cmpbge	zero, t2, t8	# E : test new word for eos
-	beq	a2, $u_eoc	# U :
-
-	beq	t8, $u_loop	# U :
-	nop
-	nop
-	nop
-
-	/* We've found a zero somewhere in the source word we just read.
-	   If it resides in the lower half, we have one (probably partial)
-	   word to write out, and if it resides in the upper half, we
-	   have one full and one partial word left to write out.
-
-	   On entry to this basic block:
-	   t1 == the shifted high-order bits from the previous source word
-	   t2 == the unshifted current source word.  */
-	.align 4
-$u_eos:
-	extqh	t2, a1, t0	# U :
-	or	t0, t1, t0	# E : first (partial) source word complete
-	cmpbge	zero, t0, t8	# E : is the null in this first bit?
-	nop
-
-	bne	t8, $u_final	# U :
-	stq_u	t0, 0(a0)	# L : the null was in the high-order bits
-	addq	a0, 8, a0	# E :
-	subq	a2, 1, a2	# E :
-
-	.align 4
-$u_late_head_exit:
-	extql	t2, a1, t0	# U :
-	cmpbge	zero, t0, t8	# E :
-	or	t8, t10, t6	# E :
-	cmoveq	a2, t6, t8	# E :
-
-	/* Take care of a final (probably partial) result word.
-	   On entry to this basic block:
-	   t0 == assembled source word
-	   t8 == cmpbge mask that found the null.  */
-	.align 4
-$u_final:
-	negq	t8, t6		# E : isolate low bit set
-	and	t6, t8, t12	# E :
-	ldq_u	t1, 0(a0)	# L :
-	subq	t12, 1, t6	# E :
-
-	or	t6, t12, t8	# E :
-	zapnot	t0, t8, t0	# U : kill source bytes > null
-	zap	t1, t8, t1	# U : kill dest bytes <= null
-	or	t0, t1, t0	# E :
-
-	stq_u	t0, 0(a0)	# E :
-	br	$finish_up	# U :
-	nop
-	nop
-
-	.align 4
-$u_eoc:				# end-of-count
-	extqh	t2, a1, t0	# U :
-	or	t0, t1, t0	# E :
-	cmpbge	zero, t0, t8	# E :
-	nop
-
-	.align 4
-$u_eocfin:			# end-of-count, final word
-	or	t10, t8, t8	# E :
-	br	$u_final	# U :
-	nop
-	nop
-
-	/* Unaligned copy entry point.  */
-	.align 4
-$unaligned:
-
-	srl	a3, 3, a2	# U : a2 = loop counter = (count - 1)/8
-	and	a0, 7, t4	# E : find dest misalignment
-	and	a1, 7, t5	# E : find src misalignment
-	mov	zero, t0	# E :
-
-	/* Conditionally load the first destination word and a bytemask
-	   with 0xff indicating that the destination byte is sacrosanct.  */
-
-	mov	zero, t6	# E :
-	beq	t4, 1f		# U :
-	ldq_u	t0, 0(a0)	# L :
-	lda	t6, -1		# E :
-
-	mskql	t6, a0, t6	# E :
-	nop
-	nop
-	nop
-
-	.align 4
-1:
-	subq	a1, t4, a1	# E : sub dest misalignment from src addr
-	/* If source misalignment is larger than dest misalignment, we need
-	   extra startup checks to avoid SEGV.  */
-	cmplt	t4, t5, t12	# E :
-	extql	t1, a1, t1	# U : shift src into place
-	lda	t2, -1		# E : for creating masks later
-
-	beq	t12, $u_head	# U :
-	mskqh	t2, t5, t2	# U : begin src byte validity mask
-	cmpbge	zero, t1, t8	# E : is there a zero?
-	nop
-
-	extql	t2, a1, t2	# U :
-	or	t8, t10, t5	# E : test for end-of-count too
-	cmpbge	zero, t2, t3	# E :
-	cmoveq	a2, t5, t8	# E : Latency=2, extra map slot
-
-	nop			# E : goes with cmov
-	andnot	t8, t3, t8	# E :
-	beq	t8, $u_head	# U :
-	nop
-
-	/* At this point we've found a zero in the first partial word of
-	   the source.  We need to isolate the valid source data and mask
-	   it into the original destination data.  (Incidentally, we know
-	   that we'll need at least one byte of that original dest word.) */
-
-	ldq_u	t0, 0(a0)	# L :
-	negq	t8, t6		# E : build bitmask of bytes <= zero
-	mskqh	t1, t4, t1	# U :
-	and	t6, t8, t12	# E :
-
-	subq	t12, 1, t6	# E :
-	or	t6, t12, t8	# E :
-	zapnot	t2, t8, t2	# U : prepare source word; mirror changes
-	zapnot	t1, t8, t1	# U : to source validity mask
-
-	andnot	t0, t2, t0	# E : zero place for source to reside
-	or	t0, t1, t0	# E : and put it there
-	stq_u	t0, 0(a0)	# L :
-	nop
-
-	.align 4
-$finish_up:
-	zapnot	t0, t12, t4	# U : was last byte written null?
-	and	t12, 0xf0, t3	# E : binary search for the address of the
-	cmovne	t4, 1, t4	# E : Latency=2, extra map slot
-	nop			# E : with cmovne
-
-	and	t12, 0xcc, t2	# E : last byte written
-	and	t12, 0xaa, t1	# E :
-	cmovne	t3, 4, t3	# E : Latency=2, extra map slot
-	nop			# E : with cmovne
-
-	bic	a0, 7, t0
-	cmovne	t2, 2, t2	# E : Latency=2, extra map slot
-	nop			# E : with cmovne
-	nop
-
-	cmovne	t1, 1, t1	# E : Latency=2, extra map slot
-	nop			# E : with cmovne
-	addq	t0, t3, t0	# E :
-	addq	t1, t2, t1	# E :
-
-	addq	t0, t1, t0	# E :
-	addq	t0, t4, t0	# add one if we filled the buffer
-	subq	t0, v0, v0	# find string length
-	ret			# L0 :
-
-	.align 4
-$zerolength:
-	nop
-	nop
-	nop
-	clr	v0
-
-$exception:
-	nop
-	nop
-	nop
-	ret
-
-	.end __strncpy_from_user

arch/alpha/lib/ev67-strlen_user.S

@@ -1,107 +0,0 @@
-/*
- * arch/alpha/lib/ev67-strlen_user.S
- * 21264 version contributed by Rick Gorton <rick.gorton@api-networks.com>
- *
- * Return the length of the string including the NULL terminator
- * (strlen+1) or zero if an error occurred.
- *
- * In places where it is critical to limit the processing time,
- * and the data is not trusted, strnlen_user() should be used.
- * It will return a value greater than its second argument if
- * that limit would be exceeded. This implementation is allowed
- * to access memory beyond the limit, but will not cross a page
- * boundary when doing so.
- *
- * Much of the information about 21264 scheduling/coding comes from:
- *      Compiler Writer's Guide for the Alpha 21264
- *      abbreviated as 'CWG' in other comments here
- *      ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html
- * Scheduling notation:
- *      E       - either cluster
- *      U       - upper subcluster; U0 - subcluster U0; U1 - subcluster U1
- *      L       - lower subcluster; L0 - subcluster L0; L1 - subcluster L1
- * Try not to change the actual algorithm if possible for consistency.
- */
-
-#include <asm/regdef.h>
-
-
-/* Allow an exception for an insn; exit if we get one.  */
-#define EX(x,y...)			\
-	99: x,##y;			\
-	.section __ex_table,"a";	\
-	.long 99b - .;			\
-	lda v0, $exception-99b(zero);	\
-	.previous
-
-
-	.set noreorder
-	.set noat
-	.text
-
-	.globl __strlen_user
-	.ent __strlen_user
-	.frame sp, 0, ra
-
-	.align 4
-__strlen_user:
-	ldah	a1, 32767(zero)	# do not use plain strlen_user() for strings
-				# that might be almost 2 GB long; you should
-				# be using strnlen_user() instead
-	nop
-	nop
-	nop
-
-	.globl __strnlen_user
-
-	.align 4
-__strnlen_user:
-	.prologue 0
-	EX( ldq_u t0, 0(a0) )	# L : load first quadword (a0 may be misaligned)
-	lda     t1, -1(zero)	# E :
-
-	insqh   t1, a0, t1	# U :
-	andnot  a0, 7, v0	# E :
-	or      t1, t0, t0	# E :
-	subq	a0, 1, a0	# E : get our +1 for the return 
-
-	cmpbge  zero, t0, t1	# E : t1 <- bitmask: bit i == 1 <==> i-th byte == 0
-	subq	a1, 7, t2	# E :
-	subq	a0, v0, t0	# E :
-	bne     t1, $found	# U :
-
-	addq	t2, t0, t2	# E :
-	addq	a1, 1, a1	# E :
-	nop			# E :
-	nop			# E :
-
-	.align 4
-$loop:	ble	t2, $limit	# U :
-	EX( ldq t0, 8(v0) )	# L :
-	nop			# E :
-	nop			# E :
-
-	cmpbge  zero, t0, t1	# E :
-	subq	t2, 8, t2	# E :
-	addq    v0, 8, v0	# E : addr += 8
-	beq     t1, $loop	# U :
-
-$found: cttz	t1, t2		# U0 :
-	addq	v0, t2, v0	# E :
-	subq    v0, a0, v0	# E :
-	ret			# L0 :
-
-$exception:
-	nop
-	nop
-	nop
-	ret
-
-	.align 4		# currently redundant
-$limit:
-	nop
-	nop
-	subq	a1, t2, v0
-	ret
-
-	.end __strlen_user

arch/alpha/lib/strlen_user.S

@@ -1,91 +0,0 @@
-/*
- * arch/alpha/lib/strlen_user.S
- *
- * Return the length of the string including the NUL terminator
- * (strlen+1) or zero if an error occurred.
- *
- * In places where it is critical to limit the processing time,
- * and the data is not trusted, strnlen_user() should be used.
- * It will return a value greater than its second argument if
- * that limit would be exceeded. This implementation is allowed
- * to access memory beyond the limit, but will not cross a page
- * boundary when doing so.
- */
-
-#include <asm/regdef.h>
-
-
-/* Allow an exception for an insn; exit if we get one.  */
-#define EX(x,y...)			\
-	99: x,##y;			\
-	.section __ex_table,"a";	\
-	.long 99b - .;			\
-	lda v0, $exception-99b(zero);	\
-	.previous
-
-
-	.set noreorder
-	.set noat
-	.text
-
-	.globl __strlen_user
-	.ent __strlen_user
-	.frame sp, 0, ra
-
-	.align 3
-__strlen_user:
-	ldah	a1, 32767(zero)	# do not use plain strlen_user() for strings
-				# that might be almost 2 GB long; you should
-				# be using strnlen_user() instead
-
-	.globl __strnlen_user
-
-	.align 3
-__strnlen_user:
-	.prologue 0
-
-	EX( ldq_u t0, 0(a0) )	# load first quadword (a0 may be misaligned)
-	lda     t1, -1(zero)
-	insqh   t1, a0, t1
-	andnot  a0, 7, v0
-	or      t1, t0, t0
-	subq	a0, 1, a0	# get our +1 for the return 
-	cmpbge  zero, t0, t1	# t1 <- bitmask: bit i == 1 <==> i-th byte == 0
-	subq	a1, 7, t2
-	subq	a0, v0, t0
-	bne     t1, $found
-
-	addq	t2, t0, t2
-	addq	a1, 1, a1
-
-	.align 3
-$loop:	ble	t2, $limit
-	EX( ldq t0, 8(v0) )
-	subq	t2, 8, t2
-	addq    v0, 8, v0	# addr += 8
-	cmpbge  zero, t0, t1
-	beq     t1, $loop
-
-$found:	negq    t1, t2		# clear all but least set bit
-	and     t1, t2, t1
-
-	and     t1, 0xf0, t2	# binary search for that set bit
-	and	t1, 0xcc, t3
-	and	t1, 0xaa, t4
-	cmovne	t2, 4, t2
-	cmovne	t3, 2, t3
-	cmovne	t4, 1, t4
-	addq	t2, t3, t2
-	addq	v0, t4, v0
-	addq	v0, t2, v0
-	nop			# dual issue next two on ev4 and ev5
-	subq    v0, a0, v0
-$exception:
-	ret
-
-	.align 3		# currently redundant
-$limit:
-	subq	a1, t2, v0
-	ret
-
-	.end __strlen_user

arch/alpha/lib/strncpy_from_user.S

@@ -1,339 +0,0 @@
-/*
- * arch/alpha/lib/strncpy_from_user.S
- * Contributed by Richard Henderson (rth@tamu.edu)
- *
- * Just like strncpy except in the return value:
- *
- * -EFAULT       if an exception occurs before the terminator is copied.
- * N             if the buffer filled.
- *
- * Otherwise the length of the string is returned.
- */
-
-
-#include <asm/errno.h>
-#include <asm/regdef.h>
-
-
-/* Allow an exception for an insn; exit if we get one.  */
-#define EX(x,y...)			\
-	99: x,##y;			\
-	.section __ex_table,"a";	\
-	.long 99b - .;			\
-	lda $31, $exception-99b($0); 	\
-	.previous
-
-
-	.set noat
-	.set noreorder
-	.text
-
-	.globl __strncpy_from_user
-	.ent __strncpy_from_user
-	.frame $30, 0, $26
-	.prologue 0
-
-	.align 3
-$aligned:
-	/* On entry to this basic block:
-	   t0 == the first destination word for masking back in
-	   t1 == the first source word.  */
-
-	/* Create the 1st output word and detect 0's in the 1st input word.  */
-	lda	t2, -1		# e1    : build a mask against false zero
-	mskqh	t2, a1, t2	# e0    :   detection in the src word
-	mskqh	t1, a1, t3	# e0    :
-	ornot	t1, t2, t2	# .. e1 :
-	mskql	t0, a1, t0	# e0    : assemble the first output word
-	cmpbge	zero, t2, t8	# .. e1 : bits set iff null found
-	or	t0, t3, t0	# e0    :
-	beq	a2, $a_eoc	# .. e1 :
-	bne	t8, $a_eos	# .. e1 :
-
-	/* On entry to this basic block:
-	   t0 == a source word not containing a null.  */
-
-$a_loop:
-	stq_u	t0, 0(a0)	# e0    :
-	addq	a0, 8, a0	# .. e1 :
-	EX( ldq_u t0, 0(a1) )	# e0    :
-	addq	a1, 8, a1	# .. e1 :
-	subq	a2, 1, a2	# e0    :
-	cmpbge	zero, t0, t8	# .. e1 (stall)
-	beq	a2, $a_eoc      # e1    :
-	beq	t8, $a_loop	# e1    :
-
-	/* Take care of the final (partial) word store.  At this point
-	   the end-of-count bit is set in t8 iff it applies.
-
-	   On entry to this basic block we have:
-	   t0 == the source word containing the null
-	   t8 == the cmpbge mask that found it.  */
-
-$a_eos:
-	negq	t8, t12		# e0    : find low bit set
-	and	t8, t12, t12	# e1 (stall)
-
-	/* For the sake of the cache, don't read a destination word
-	   if we're not going to need it.  */
-	and	t12, 0x80, t6	# e0    :
-	bne	t6, 1f		# .. e1 (zdb)
-
-	/* We're doing a partial word store and so need to combine
-	   our source and original destination words.  */
-	ldq_u	t1, 0(a0)	# e0    :
-	subq	t12, 1, t6	# .. e1 :
-	or	t12, t6, t8	# e0    :
-	unop			#
-	zapnot	t0, t8, t0	# e0    : clear src bytes > null
-	zap	t1, t8, t1	# .. e1 : clear dst bytes <= null
-	or	t0, t1, t0	# e1    :
-
-1:	stq_u	t0, 0(a0)
-	br	$finish_up
-
-	/* Add the end-of-count bit to the eos detection bitmask.  */
-$a_eoc:
-	or	t10, t8, t8
-	br	$a_eos
-
-	/*** The Function Entry Point ***/
-	.align 3
-__strncpy_from_user:
-	mov	a0, v0		# save the string start
-	beq	a2, $zerolength
-
-	/* Are source and destination co-aligned?  */
-	xor	a0, a1, t1	# e0    :
-	and	a0, 7, t0	# .. e1 : find dest misalignment
-	and	t1, 7, t1	# e0    :
-	addq	a2, t0, a2	# .. e1 : bias count by dest misalignment
-	subq	a2, 1, a2	# e0    :
-	and	a2, 7, t2	# e1    :
-	srl	a2, 3, a2	# e0    : a2 = loop counter = (count - 1)/8
-	addq	zero, 1, t10	# .. e1 :
-	sll	t10, t2, t10	# e0    : t10 = bitmask of last count byte
-	bne	t1, $unaligned	# .. e1 :
-
-	/* We are co-aligned; take care of a partial first word.  */
-
-	EX( ldq_u t1, 0(a1) )	# e0    : load first src word
-	addq	a1, 8, a1	# .. e1 :
-
-	beq	t0, $aligned	# avoid loading dest word if not needed
-	ldq_u	t0, 0(a0)	# e0    :
-	br	$aligned	# .. e1 :
-
-
-/* The source and destination are not co-aligned.  Align the destination
-   and cope.  We have to be very careful about not reading too much and
-   causing a SEGV.  */
-
-	.align 3
-$u_head:
-	/* We know just enough now to be able to assemble the first
-	   full source word.  We can still find a zero at the end of it
-	   that prevents us from outputting the whole thing.
-
-	   On entry to this basic block:
-	   t0 == the first dest word, unmasked
-	   t1 == the shifted low bits of the first source word
-	   t6 == bytemask that is -1 in dest word bytes */
-
-	EX( ldq_u t2, 8(a1) )	# e0    : load second src word
-	addq	a1, 8, a1	# .. e1 :
-	mskql	t0, a0, t0	# e0    : mask trailing garbage in dst
-	extqh	t2, a1, t4	# e0    :
-	or	t1, t4, t1	# e1    : first aligned src word complete
-	mskqh	t1, a0, t1	# e0    : mask leading garbage in src
-	or	t0, t1, t0	# e0    : first output word complete
-	or	t0, t6, t6	# e1    : mask original data for zero test
-	cmpbge	zero, t6, t8	# e0    :
-	beq	a2, $u_eocfin	# .. e1 :
-	bne	t8, $u_final	# e1    :
-
-	lda	t6, -1			# e1    : mask out the bits we have
-	mskql	t6, a1, t6		# e0    :   already seen
-	stq_u	t0, 0(a0)		# e0    : store first output word
-	or      t6, t2, t2		# .. e1 :
-	cmpbge	zero, t2, t8		# e0    : find nulls in second partial
-	addq	a0, 8, a0		# .. e1 :
-	subq	a2, 1, a2		# e0    :
-	bne	t8, $u_late_head_exit	# .. e1 :
-
-	/* Finally, we've got all the stupid leading edge cases taken care
-	   of and we can set up to enter the main loop.  */
-
-	extql	t2, a1, t1	# e0    : position hi-bits of lo word
-	EX( ldq_u t2, 8(a1) )	# .. e1 : read next high-order source word
-	addq	a1, 8, a1	# e0    :
-	cmpbge	zero, t2, t8	# e1 (stall)
-	beq	a2, $u_eoc	# e1    :
-	bne	t8, $u_eos	# e1    :
-
-	/* Unaligned copy main loop.  In order to avoid reading too much,
-	   the loop is structured to detect zeros in aligned source words.
-	   This has, unfortunately, effectively pulled half of a loop
-	   iteration out into the head and half into the tail, but it does
-	   prevent nastiness from accumulating in the very thing we want
-	   to run as fast as possible.
-
-	   On entry to this basic block:
-	   t1 == the shifted high-order bits from the previous source word
-	   t2 == the unshifted current source word
-
-	   We further know that t2 does not contain a null terminator.  */
-
-	.align 3
-$u_loop:
-	extqh	t2, a1, t0	# e0    : extract high bits for current word
-	addq	a1, 8, a1	# .. e1 :
-	extql	t2, a1, t3	# e0    : extract low bits for next time
-	addq	a0, 8, a0	# .. e1 :
-	or	t0, t1, t0	# e0    : current dst word now complete
-	EX( ldq_u t2, 0(a1) )	# .. e1 : load high word for next time
-	stq_u	t0, -8(a0)	# e0    : save the current word
-	mov	t3, t1		# .. e1 :
-	subq	a2, 1, a2	# e0    :
-	cmpbge	zero, t2, t8	# .. e1 : test new word for eos
-	beq	a2, $u_eoc	# e1    :
-	beq	t8, $u_loop	# e1    :
-
-	/* We've found a zero somewhere in the source word we just read.
-	   If it resides in the lower half, we have one (probably partial)
-	   word to write out, and if it resides in the upper half, we
-	   have one full and one partial word left to write out.
-
-	   On entry to this basic block:
-	   t1 == the shifted high-order bits from the previous source word
-	   t2 == the unshifted current source word.  */
-$u_eos:
-	extqh	t2, a1, t0	# e0    :
-	or	t0, t1, t0	# e1    : first (partial) source word complete
-
-	cmpbge	zero, t0, t8	# e0    : is the null in this first bit?
-	bne	t8, $u_final	# .. e1 (zdb)
-
-	stq_u	t0, 0(a0)	# e0    : the null was in the high-order bits
-	addq	a0, 8, a0	# .. e1 :
-	subq	a2, 1, a2	# e1    :
-
-$u_late_head_exit:
-	extql	t2, a1, t0	# .. e0 :
-	cmpbge	zero, t0, t8	# e0    :
-	or	t8, t10, t6	# e1    :
-	cmoveq	a2, t6, t8	# e0    :
-	nop			# .. e1 :
-
-	/* Take care of a final (probably partial) result word.
-	   On entry to this basic block:
-	   t0 == assembled source word
-	   t8 == cmpbge mask that found the null.  */
-$u_final:
-	negq	t8, t6		# e0    : isolate low bit set
-	and	t6, t8, t12	# e1    :
-
-	and	t12, 0x80, t6	# e0    : avoid dest word load if we can
-	bne	t6, 1f		# .. e1 (zdb)
-
-	ldq_u	t1, 0(a0)	# e0    :
-	subq	t12, 1, t6	# .. e1 :
-	or	t6, t12, t8	# e0    :
-	zapnot	t0, t8, t0	# .. e1 : kill source bytes > null
-	zap	t1, t8, t1	# e0    : kill dest bytes <= null
-	or	t0, t1, t0	# e1    :
-
-1:	stq_u	t0, 0(a0)	# e0    :
-	br	$finish_up
-
-$u_eoc:				# end-of-count
-	extqh	t2, a1, t0
-	or	t0, t1, t0
-	cmpbge	zero, t0, t8
-
-$u_eocfin:			# end-of-count, final word
-	or	t10, t8, t8
-	br	$u_final
-
-	/* Unaligned copy entry point.  */
-	.align 3
-$unaligned:
-
-	EX( ldq_u t1, 0(a1) )	# e0    : load first source word
-
-	and	a0, 7, t4	# .. e1 : find dest misalignment
-	and	a1, 7, t5	# e0    : find src misalignment
-
-	/* Conditionally load the first destination word and a bytemask
-	   with 0xff indicating that the destination byte is sacrosanct.  */
-
-	mov	zero, t0	# .. e1 :
-	mov	zero, t6	# e0    :
-	beq	t4, 1f		# .. e1 :
-	ldq_u	t0, 0(a0)	# e0    :
-	lda	t6, -1		# .. e1 :
-	mskql	t6, a0, t6	# e0    :
-1:
-	subq	a1, t4, a1	# .. e1 : sub dest misalignment from src addr
-
-	/* If source misalignment is larger than dest misalignment, we need
-	   extra startup checks to avoid SEGV.  */
-
-	cmplt	t4, t5, t12	# e1    :
-	extql	t1, a1, t1	# .. e0 : shift src into place
-	lda	t2, -1		# e0    : for creating masks later
-	beq	t12, $u_head	# e1    :
-
-	mskqh	t2, t5, t2	# e0    : begin src byte validity mask
-	cmpbge	zero, t1, t8	# .. e1 : is there a zero?
-	extql	t2, a1, t2	# e0    :
-	or	t8, t10, t5	# .. e1 : test for end-of-count too
-	cmpbge	zero, t2, t3	# e0    :
-	cmoveq	a2, t5, t8	# .. e1 :
-	andnot	t8, t3, t8	# e0    :
-	beq	t8, $u_head	# .. e1 (zdb)
-
-	/* At this point we've found a zero in the first partial word of
-	   the source.  We need to isolate the valid source data and mask
-	   it into the original destination data.  (Incidentally, we know
-	   that we'll need at least one byte of that original dest word.) */
-
-	ldq_u	t0, 0(a0)	# e0    :
-	negq	t8, t6		# .. e1 : build bitmask of bytes <= zero
-	mskqh	t1, t4, t1	# e0    :
-	and	t6, t8, t12	# .. e1 :
-	subq	t12, 1, t6	# e0    :
-	or	t6, t12, t8	# e1    :
-
-	zapnot	t2, t8, t2	# e0    : prepare source word; mirror changes
-	zapnot	t1, t8, t1	# .. e1 : to source validity mask
-
-	andnot	t0, t2, t0	# e0    : zero place for source to reside
-	or	t0, t1, t0	# e1    : and put it there
-	stq_u	t0, 0(a0)	# e0    :
-
-$finish_up:
-	zapnot	t0, t12, t4	# was last byte written null?
-	cmovne	t4, 1, t4
-
-	and	t12, 0xf0, t3	# binary search for the address of the
-	and	t12, 0xcc, t2	# last byte written
-	and	t12, 0xaa, t1
-	bic	a0, 7, t0
-	cmovne	t3, 4, t3
-	cmovne	t2, 2, t2
-	cmovne	t1, 1, t1
-	addq	t0, t3, t0
-	addq	t1, t2, t1
-	addq	t0, t1, t0
-	addq	t0, t4, t0	# add one if we filled the buffer
-
-	subq	t0, v0, v0	# find string length
-	ret
-
-$zerolength:
-	clr	v0
-$exception:
-	ret
-
-	.end __strncpy_from_user

arch/alpha/mm/fault.c

@@ -89,6 +89,8 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 	const struct exception_table_entry *fixup;
 	int fault, si_code = SEGV_MAPERR;
 	siginfo_t info;
+	unsigned int flags = (FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE |
+			      (cause > 0 ? FAULT_FLAG_WRITE : 0));
 
 	/* As of EV6, a load into $31/$f31 is a prefetch, and never faults
 	   (or is suppressed by the PALcode).  Support that for older CPUs
@@ -114,6 +116,7 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 		goto vmalloc_fault;
 #endif
 
+retry:
 	down_read(&mm->mmap_sem);
 	vma = find_vma(mm, address);
 	if (!vma)
@@ -144,8 +147,11 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 	/* If for any reason at all we couldn't handle the fault,
 	   make sure we exit gracefully rather than endlessly redo
 	   the fault.  */
-	fault = handle_mm_fault(mm, vma, address, cause > 0 ? FAULT_FLAG_WRITE : 0);
-	up_read(&mm->mmap_sem);
+	fault = handle_mm_fault(mm, vma, address, flags);
+
+	if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
+		return;
+
 	if (unlikely(fault & VM_FAULT_ERROR)) {
 		if (fault & VM_FAULT_OOM)
 			goto out_of_memory;
@@ -153,10 +159,26 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 			goto do_sigbus;
 		BUG();
 	}
-	if (fault & VM_FAULT_MAJOR)
-		current->maj_flt++;
-	else
-		current->min_flt++;
+
+	if (flags & FAULT_FLAG_ALLOW_RETRY) {
+		if (fault & VM_FAULT_MAJOR)
+			current->maj_flt++;
+		else
+			current->min_flt++;
+		if (fault & VM_FAULT_RETRY) {
+			flags &= ~FAULT_FLAG_ALLOW_RETRY;
+
+			 /* No need to up_read(&mm->mmap_sem) as we would
+			 * have already released it in __lock_page_or_retry
+			 * in mm/filemap.c.
+			 */
+
+			goto retry;
+		}
+	}
+
+	up_read(&mm->mmap_sem);
+
 	return;
 
 	/* Something tried to access memory that isn't in our memory map.
@@ -186,12 +208,14 @@ do_page_fault(unsigned long address, unsigned long mmcsr,
 	/* We ran out of memory, or some other thing happened to us that
 	   made us unable to handle the page fault gracefully.  */
  out_of_memory:
+	up_read(&mm->mmap_sem);
 	if (!user_mode(regs))
 		goto no_context;
 	pagefault_out_of_memory();
 	return;
 
  do_sigbus:
+	up_read(&mm->mmap_sem);
 	/* Send a sigbus, regardless of whether we were in kernel
 	   or user mode.  */
 	info.si_signo = SIGBUS;

arch/alpha/oprofile/common.c

@@ -12,6 +12,7 @@
 #include <linux/smp.h>
 #include <linux/errno.h>
 #include <asm/ptrace.h>
+#include <asm/special_insns.h>
 
 #include "op_impl.h"
 

arch/arm/Kconfig

@@ -38,7 +38,6 @@ config ARM
 	select HARDIRQS_SW_RESEND
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
-	select GENERIC_IRQ_PROBE
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select HARDIRQS_SW_RESEND
 	select CPU_PM if (SUSPEND || CPU_IDLE)
@@ -126,11 +125,6 @@ config TRACE_IRQFLAGS_SUPPORT
 	bool
 	default y
 
-config GENERIC_LOCKBREAK
-	bool
-	default y
-	depends on SMP && PREEMPT
-
 config RWSEM_GENERIC_SPINLOCK
 	bool
 	default y
@@ -2150,6 +2144,7 @@ source "drivers/cpufreq/Kconfig"
 config CPU_FREQ_IMX
 	tristate "CPUfreq driver for i.MX CPUs"
 	depends on ARCH_MXC && CPU_FREQ
+	select CPU_FREQ_TABLE
 	help
 	  This enables the CPUfreq driver for i.MX CPUs.
 

arch/arm/boot/dts/am33xx.dtsi

@@ -154,5 +154,10 @@
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
 		};
+
+		wdt2: wdt@44e35000 {
+			compatible = "ti,omap3-wdt";
+			ti,hwmods = "wd_timer2";
+		};
 	};
 };

arch/arm/boot/dts/imx51-babbage.dts

@@ -25,8 +25,8 @@
 		aips@70000000 { /* aips-1 */
 			spba@70000000 {
 				esdhc@70004000 { /* ESDHC1 */
-					fsl,cd-internal;
-					fsl,wp-internal;
+					fsl,cd-controller;
+					fsl,wp-controller;
 					status = "okay";
 				};
 

arch/arm/boot/dts/kirkwood-iconnect.dts

@@ -41,9 +41,13 @@
 		};
 		power-blue {
 			label = "power:blue";
-			gpios = <&gpio1 11 0>;
+			gpios = <&gpio1 10 0>;
 			linux,default-trigger = "timer";
 		};
+		power-red {
+			label = "power:red";
+			gpios = <&gpio1 11 0>;
+		};
 		usb1 {
 			label = "usb1:blue";
 			gpios = <&gpio1 12 0>;

arch/arm/boot/dts/twl6030.dtsi

@@ -66,6 +66,7 @@
 
 	vcxio: regulator@8 {
 		compatible = "ti,twl6030-vcxio";
+		regulator-always-on;
 	};
 
 	vusb: regulator@9 {
@@ -74,10 +75,12 @@
 
 	v1v8: regulator@10 {
 		compatible = "ti,twl6030-v1v8";
+		regulator-always-on;
 	};
 
 	v2v1: regulator@11 {
 		compatible = "ti,twl6030-v2v1";
+		regulator-always-on;
 	};
 
 	clk32kg: regulator@12 {

arch/arm/configs/u8500_defconfig

@@ -86,6 +86,7 @@ CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_LM3530=y
 CONFIG_LEDS_LP5521=y
+CONFIG_LEDS_GPIO=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AB8500=y
 CONFIG_RTC_DRV_PL031=y

arch/arm/include/asm/pgtable.h

@@ -195,25 +195,6 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
 
 #define pte_clear(mm,addr,ptep)	set_pte_ext(ptep, __pte(0), 0)
 
-#if __LINUX_ARM_ARCH__ < 6
-static inline void __sync_icache_dcache(pte_t pteval)
-{
-}
-#else
-extern void __sync_icache_dcache(pte_t pteval);
-#endif
-
-static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
-			      pte_t *ptep, pte_t pteval)
-{
-	if (addr >= TASK_SIZE)
-		set_pte_ext(ptep, pteval, 0);
-	else {
-		__sync_icache_dcache(pteval);
-		set_pte_ext(ptep, pteval, PTE_EXT_NG);
-	}
-}
-
 #define pte_none(pte)		(!pte_val(pte))
 #define pte_present(pte)	(pte_val(pte) & L_PTE_PRESENT)
 #define pte_write(pte)		(!(pte_val(pte) & L_PTE_RDONLY))
@@ -226,6 +207,27 @@ static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
 	((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \
 	 (L_PTE_PRESENT | L_PTE_USER))
 
+#if __LINUX_ARM_ARCH__ < 6
+static inline void __sync_icache_dcache(pte_t pteval)
+{
+}
+#else
+extern void __sync_icache_dcache(pte_t pteval);
+#endif
+
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep, pte_t pteval)
+{
+	unsigned long ext = 0;
+
+	if (addr < TASK_SIZE && pte_present_user(pteval)) {
+		__sync_icache_dcache(pteval);
+		ext |= PTE_EXT_NG;
+	}
+
+	set_pte_ext(ptep, pteval, ext);
+}
+
 #define PTE_BIT_FUNC(fn,op) \
 static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
 
@@ -251,13 +253,13 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
  *
  *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
  *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- *   <--------------- offset --------------------> <- type --> 0 0 0
+ *   <--------------- offset ----------------------> < type -> 0 0 0
  *
- * This gives us up to 63 swap files and 32GB per swap file.  Note that
+ * This gives us up to 31 swap files and 64GB per swap file.  Note that
  * the offset field is always non-zero.
  */
 #define __SWP_TYPE_SHIFT	3
-#define __SWP_TYPE_BITS		6
+#define __SWP_TYPE_BITS		5
 #define __SWP_TYPE_MASK		((1 << __SWP_TYPE_BITS) - 1)
 #define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
 

arch/arm/include/asm/sched_clock.h

@@ -10,5 +10,7 @@
 
 extern void sched_clock_postinit(void);
 extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate);
+extern void setup_sched_clock_needs_suspend(u32 (*read)(void), int bits,
+		unsigned long rate);
 
 #endif

arch/arm/kernel/sched_clock.c

@@ -21,6 +21,8 @@ struct clock_data {
 	u32 epoch_cyc_copy;
 	u32 mult;
 	u32 shift;
+	bool suspended;
+	bool needs_suspend;
 };
 
 static void sched_clock_poll(unsigned long wrap_ticks);
@@ -49,6 +51,9 @@ static unsigned long long cyc_to_sched_clock(u32 cyc, u32 mask)
 	u64 epoch_ns;
 	u32 epoch_cyc;
 
+	if (cd.suspended)
+		return cd.epoch_ns;
+
 	/*
 	 * Load the epoch_cyc and epoch_ns atomically.  We do this by
 	 * ensuring that we always write epoch_cyc, epoch_ns and
@@ -98,6 +103,13 @@ static void sched_clock_poll(unsigned long wrap_ticks)
 	update_sched_clock();
 }
 
+void __init setup_sched_clock_needs_suspend(u32 (*read)(void), int bits,
+		unsigned long rate)
+{
+	setup_sched_clock(read, bits, rate);
+	cd.needs_suspend = true;
+}
+
 void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate)
 {
 	unsigned long r, w;
@@ -169,11 +181,23 @@ void __init sched_clock_postinit(void)
 static int sched_clock_suspend(void)
 {
 	sched_clock_poll(sched_clock_timer.data);
+	if (cd.needs_suspend)
+		cd.suspended = true;
 	return 0;
 }
 
+static void sched_clock_resume(void)
+{
+	if (cd.needs_suspend) {
+		cd.epoch_cyc = read_sched_clock();
+		cd.epoch_cyc_copy = cd.epoch_cyc;
+		cd.suspended = false;
+	}
+}
+
 static struct syscore_ops sched_clock_ops = {
 	.suspend = sched_clock_suspend,
+	.resume = sched_clock_resume,
 };
 
 static int __init sched_clock_syscore_init(void)

arch/arm/kernel/topology.c

@@ -321,7 +321,7 @@ void store_cpu_topology(unsigned int cpuid)
  * init_cpu_topology is called at boot when only one cpu is running
  * which prevent simultaneous write access to cpu_topology array
  */
-void init_cpu_topology(void)
+void __init init_cpu_topology(void)
 {
 	unsigned int cpu;
 

arch/arm/lib/Makefile

@@ -16,13 +16,30 @@ lib-y		:= backtrace.o changebit.o csumipv6.o csumpartial.o   \
 		   call_with_stack.o
 
 mmu-y	:= clear_user.o copy_page.o getuser.o putuser.o
-mmu-y	+= copy_from_user.o copy_to_user.o
+
+# the code in uaccess.S is not preemption safe and
+# probably faster on ARMv3 only
+ifeq ($(CONFIG_PREEMPT),y)
+  mmu-y	+= copy_from_user.o copy_to_user.o
+else
+ifneq ($(CONFIG_CPU_32v3),y)
+  mmu-y	+= copy_from_user.o copy_to_user.o
+else
+  mmu-y	+= uaccess.o
+endif
+endif
 
 # using lib_ here won't override already available weak symbols
 obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o
 
-lib-$(CONFIG_MMU)		+= $(mmu-y)
-lib-y				+= io-readsw-armv4.o io-writesw-armv4.o
+lib-$(CONFIG_MMU) += $(mmu-y)
+
+ifeq ($(CONFIG_CPU_32v3),y)
+  lib-y	+= io-readsw-armv3.o io-writesw-armv3.o
+else
+  lib-y	+= io-readsw-armv4.o io-writesw-armv4.o
+endif
+
 lib-$(CONFIG_ARCH_RPC)		+= ecard.o io-acorn.o floppydma.o
 lib-$(CONFIG_ARCH_SHARK)	+= io-shark.o
 

arch/arm/lib/io-readsw-armv3.S

@@ -0,0 +1,106 @@
+/*
+ *  linux/arch/arm/lib/io-readsw-armv3.S
+ *
+ *  Copyright (C) 1995-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+.Linsw_bad_alignment:
+		adr	r0, .Linsw_bad_align_msg
+		mov	r2, lr
+		b	panic
+.Linsw_bad_align_msg:
+		.asciz	"insw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
+		.align
+
+.Linsw_align:	tst	r1, #1
+		bne	.Linsw_bad_alignment
+
+		ldr	r3, [r0]
+		strb	r3, [r1], #1
+		mov	r3, r3, lsr #8
+		strb	r3, [r1], #1
+
+		subs	r2, r2, #1
+		moveq	pc, lr
+
+ENTRY(__raw_readsw)
+		teq	r2, #0		@ do we have to check for the zero len?
+		moveq	pc, lr
+		tst	r1, #3
+		bne	.Linsw_align
+
+.Linsw_aligned:	mov	ip, #0xff
+		orr	ip, ip, ip, lsl #8
+		stmfd	sp!, {r4, r5, r6, lr}
+
+		subs	r2, r2, #8
+		bmi	.Lno_insw_8
+
+.Linsw_8_lp:	ldr	r3, [r0]
+		and	r3, r3, ip
+		ldr	r4, [r0]
+		orr	r3, r3, r4, lsl #16
+
+		ldr	r4, [r0]
+		and	r4, r4, ip
+		ldr	r5, [r0]
+		orr	r4, r4, r5, lsl #16
+
+		ldr	r5, [r0]
+		and	r5, r5, ip
+		ldr	r6, [r0]
+		orr	r5, r5, r6, lsl #16
+
+		ldr	r6, [r0]
+		and	r6, r6, ip
+		ldr	lr, [r0]
+		orr	r6, r6, lr, lsl #16
+
+		stmia	r1!, {r3 - r6}
+
+		subs	r2, r2, #8
+		bpl	.Linsw_8_lp
+
+		tst	r2, #7
+		ldmeqfd	sp!, {r4, r5, r6, pc}
+
+.Lno_insw_8:	tst	r2, #4
+		beq	.Lno_insw_4
+
+		ldr	r3, [r0]
+		and	r3, r3, ip
+		ldr	r4, [r0]
+		orr	r3, r3, r4, lsl #16
+
+		ldr	r4, [r0]
+		and	r4, r4, ip
+		ldr	r5, [r0]
+		orr	r4, r4, r5, lsl #16
+
+		stmia	r1!, {r3, r4}
+
+.Lno_insw_4:	tst	r2, #2
+		beq	.Lno_insw_2
+
+		ldr	r3, [r0]
+		and	r3, r3, ip
+		ldr	r4, [r0]
+		orr	r3, r3, r4, lsl #16
+
+		str	r3, [r1], #4
+
+.Lno_insw_2:	tst	r2, #1
+		ldrne	r3, [r0]
+		strneb	r3, [r1], #1
+		movne	r3, r3, lsr #8
+		strneb	r3, [r1]
+
+		ldmfd	sp!, {r4, r5, r6, pc}
+
+

arch/arm/lib/io-writesw-armv3.S

@@ -0,0 +1,126 @@
+/*
+ *  linux/arch/arm/lib/io-writesw-armv3.S
+ *
+ *  Copyright (C) 1995-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+.Loutsw_bad_alignment:
+		adr	r0, .Loutsw_bad_align_msg
+		mov	r2, lr
+		b	panic
+.Loutsw_bad_align_msg:
+		.asciz	"outsw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
+		.align
+
+.Loutsw_align:	tst	r1, #1
+		bne	.Loutsw_bad_alignment
+
+		add	r1, r1, #2
+
+		ldr	r3, [r1, #-4]
+		mov	r3, r3, lsr #16
+		orr	r3, r3, r3, lsl #16
+		str	r3, [r0]
+		subs	r2, r2, #1
+		moveq	pc, lr
+
+ENTRY(__raw_writesw)
+		teq	r2, #0		@ do we have to check for the zero len?
+		moveq	pc, lr
+		tst	r1, #3
+		bne	.Loutsw_align
+
+		stmfd	sp!, {r4, r5, r6, lr}
+
+		subs	r2, r2, #8
+		bmi	.Lno_outsw_8
+
+.Loutsw_8_lp:	ldmia	r1!, {r3, r4, r5, r6}
+
+		mov	ip, r3, lsl #16
+		orr	ip, ip, ip, lsr #16
+		str	ip, [r0]
+
+		mov	ip, r3, lsr #16
+		orr	ip, ip, ip, lsl #16
+		str	ip, [r0]
+
+		mov	ip, r4, lsl #16
+		orr	ip, ip, ip, lsr #16
+		str	ip, [r0]
+
+		mov	ip, r4, lsr #16
+		orr	ip, ip, ip, lsl #16
+		str	ip, [r0]
+
+		mov	ip, r5, lsl #16
+		orr	ip, ip, ip, lsr #16
+		str	ip, [r0]
+
+		mov	ip, r5, lsr #16
+		orr	ip, ip, ip, lsl #16
+		str	ip, [r0]
+
+		mov	ip, r6, lsl #16
+		orr	ip, ip, ip, lsr #16
+		str	ip, [r0]
+
+		mov	ip, r6, lsr #16
+		orr	ip, ip, ip, lsl #16
+		str	ip, [r0]
+
+		subs	r2, r2, #8
+		bpl	.Loutsw_8_lp
+
+		tst	r2, #7
+		ldmeqfd	sp!, {r4, r5, r6, pc}
+
+.Lno_outsw_8:	tst	r2, #4
+		beq	.Lno_outsw_4
+
+		ldmia	r1!, {r3, r4}
+
+		mov	ip, r3, lsl #16
+		orr	ip, ip, ip, lsr #16
+		str	ip, [r0]
+
+		mov	ip, r3, lsr #16
+		orr	ip, ip, ip, lsl #16
+		str	ip, [r0]
+
+		mov	ip, r4, lsl #16
+		orr	ip, ip, ip, lsr #16
+		str	ip, [r0]
+
+		mov	ip, r4, lsr #16
+		orr	ip, ip, ip, lsl #16
+		str	ip, [r0]
+
+.Lno_outsw_4:	tst	r2, #2
+		beq	.Lno_outsw_2
+
+		ldr	r3, [r1], #4
+
+		mov	ip, r3, lsl #16
+		orr	ip, ip, ip, lsr #16
+		str	ip, [r0]
+
+		mov	ip, r3, lsr #16
+		orr	ip, ip, ip, lsl #16
+		str	ip, [r0]
+
+.Lno_outsw_2:	tst	r2, #1
+
+		ldrne	r3, [r1]
+
+		movne	ip, r3, lsl #16
+		orrne	ip, ip, ip, lsr #16
+		strne	ip, [r0]
+
+		ldmfd	sp!, {r4, r5, r6, pc}

arch/arm/lib/uaccess.S

@@ -0,0 +1,564 @@
+/*
+ *  linux/arch/arm/lib/uaccess.S
+ *
+ *  Copyright (C) 1995, 1996,1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Routines to block copy data to/from user memory
+ *   These are highly optimised both for the 4k page size
+ *   and for various alignments.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/errno.h>
+#include <asm/domain.h>
+
+		.text
+
+#define PAGE_SHIFT 12
+
+/* Prototype: int __copy_to_user(void *to, const char *from, size_t n)
+ * Purpose  : copy a block to user memory from kernel memory
+ * Params   : to   - user memory
+ *          : from - kernel memory
+ *          : n    - number of bytes to copy
+ * Returns  : Number of bytes NOT copied.
+ */
+
+.Lc2u_dest_not_aligned:
+		rsb	ip, ip, #4
+		cmp	ip, #2
+		ldrb	r3, [r1], #1
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
+		ldrgeb	r3, [r1], #1
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
+		ldrgtb	r3, [r1], #1
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
+		sub	r2, r2, ip
+		b	.Lc2u_dest_aligned
+
+ENTRY(__copy_to_user)
+		stmfd	sp!, {r2, r4 - r7, lr}
+		cmp	r2, #4
+		blt	.Lc2u_not_enough
+		ands	ip, r0, #3
+		bne	.Lc2u_dest_not_aligned
+.Lc2u_dest_aligned:
+
+		ands	ip, r1, #3
+		bne	.Lc2u_src_not_aligned
+/*
+ * Seeing as there has to be at least 8 bytes to copy, we can
+ * copy one word, and force a user-mode page fault...
+ */
+
+.Lc2u_0fupi:	subs	r2, r2, #4
+		addmi	ip, r2, #4
+		bmi	.Lc2u_0nowords
+		ldr	r3, [r1], #4
+USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
+		mov	ip, r0, lsl #32 - PAGE_SHIFT	@ On each page, use a ld/st??t instruction
+		rsb	ip, ip, #0
+		movs	ip, ip, lsr #32 - PAGE_SHIFT
+		beq	.Lc2u_0fupi
+/*
+ * ip = max no. of bytes to copy before needing another "strt" insn
+ */
+		cmp	r2, ip
+		movlt	ip, r2
+		sub	r2, r2, ip
+		subs	ip, ip, #32
+		blt	.Lc2u_0rem8lp
+
+.Lc2u_0cpy8lp:	ldmia	r1!, {r3 - r6}
+		stmia	r0!, {r3 - r6}			@ Shouldnt fault
+		ldmia	r1!, {r3 - r6}
+		subs	ip, ip, #32
+		stmia	r0!, {r3 - r6}			@ Shouldnt fault
+		bpl	.Lc2u_0cpy8lp
+
+.Lc2u_0rem8lp:	cmn	ip, #16
+		ldmgeia	r1!, {r3 - r6}
+		stmgeia	r0!, {r3 - r6}			@ Shouldnt fault
+		tst	ip, #8
+		ldmneia	r1!, {r3 - r4}
+		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
+		tst	ip, #4
+		ldrne	r3, [r1], #4
+	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
+		ands	ip, ip, #3
+		beq	.Lc2u_0fupi
+.Lc2u_0nowords:	teq	ip, #0
+		beq	.Lc2u_finished
+.Lc2u_nowords:	cmp	ip, #2
+		ldrb	r3, [r1], #1
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
+		ldrgeb	r3, [r1], #1
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
+		ldrgtb	r3, [r1], #1
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
+		b	.Lc2u_finished
+
+.Lc2u_not_enough:
+		movs	ip, r2
+		bne	.Lc2u_nowords
+.Lc2u_finished:	mov	r0, #0
+		ldmfd	sp!, {r2, r4 - r7, pc}
+
+.Lc2u_src_not_aligned:
+		bic	r1, r1, #3
+		ldr	r7, [r1], #4
+		cmp	ip, #2
+		bgt	.Lc2u_3fupi
+		beq	.Lc2u_2fupi
+.Lc2u_1fupi:	subs	r2, r2, #4
+		addmi	ip, r2, #4
+		bmi	.Lc2u_1nowords
+		mov	r3, r7, pull #8
+		ldr	r7, [r1], #4
+		orr	r3, r3, r7, push #24
+USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
+		mov	ip, r0, lsl #32 - PAGE_SHIFT
+		rsb	ip, ip, #0
+		movs	ip, ip, lsr #32 - PAGE_SHIFT
+		beq	.Lc2u_1fupi
+		cmp	r2, ip
+		movlt	ip, r2
+		sub	r2, r2, ip
+		subs	ip, ip, #16
+		blt	.Lc2u_1rem8lp
+
+.Lc2u_1cpy8lp:	mov	r3, r7, pull #8
+		ldmia	r1!, {r4 - r7}
+		subs	ip, ip, #16
+		orr	r3, r3, r4, push #24
+		mov	r4, r4, pull #8
+		orr	r4, r4, r5, push #24
+		mov	r5, r5, pull #8
+		orr	r5, r5, r6, push #24
+		mov	r6, r6, pull #8
+		orr	r6, r6, r7, push #24
+		stmia	r0!, {r3 - r6}			@ Shouldnt fault
+		bpl	.Lc2u_1cpy8lp
+
+.Lc2u_1rem8lp:	tst	ip, #8
+		movne	r3, r7, pull #8
+		ldmneia	r1!, {r4, r7}
+		orrne	r3, r3, r4, push #24
+		movne	r4, r4, pull #8
+		orrne	r4, r4, r7, push #24
+		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
+		tst	ip, #4
+		movne	r3, r7, pull #8
+		ldrne	r7, [r1], #4
+		orrne	r3, r3, r7, push #24
+	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
+		ands	ip, ip, #3
+		beq	.Lc2u_1fupi
+.Lc2u_1nowords:	mov	r3, r7, get_byte_1
+		teq	ip, #0
+		beq	.Lc2u_finished
+		cmp	ip, #2
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
+		movge	r3, r7, get_byte_2
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
+		movgt	r3, r7, get_byte_3
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
+		b	.Lc2u_finished
+
+.Lc2u_2fupi:	subs	r2, r2, #4
+		addmi	ip, r2, #4
+		bmi	.Lc2u_2nowords
+		mov	r3, r7, pull #16
+		ldr	r7, [r1], #4
+		orr	r3, r3, r7, push #16
+USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
+		mov	ip, r0, lsl #32 - PAGE_SHIFT
+		rsb	ip, ip, #0
+		movs	ip, ip, lsr #32 - PAGE_SHIFT
+		beq	.Lc2u_2fupi
+		cmp	r2, ip
+		movlt	ip, r2
+		sub	r2, r2, ip
+		subs	ip, ip, #16
+		blt	.Lc2u_2rem8lp
+
+.Lc2u_2cpy8lp:	mov	r3, r7, pull #16
+		ldmia	r1!, {r4 - r7}
+		subs	ip, ip, #16
+		orr	r3, r3, r4, push #16
+		mov	r4, r4, pull #16
+		orr	r4, r4, r5, push #16
+		mov	r5, r5, pull #16
+		orr	r5, r5, r6, push #16
+		mov	r6, r6, pull #16
+		orr	r6, r6, r7, push #16
+		stmia	r0!, {r3 - r6}			@ Shouldnt fault
+		bpl	.Lc2u_2cpy8lp
+
+.Lc2u_2rem8lp:	tst	ip, #8
+		movne	r3, r7, pull #16
+		ldmneia	r1!, {r4, r7}
+		orrne	r3, r3, r4, push #16
+		movne	r4, r4, pull #16
+		orrne	r4, r4, r7, push #16
+		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
+		tst	ip, #4
+		movne	r3, r7, pull #16
+		ldrne	r7, [r1], #4
+		orrne	r3, r3, r7, push #16
+	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
+		ands	ip, ip, #3
+		beq	.Lc2u_2fupi
+.Lc2u_2nowords:	mov	r3, r7, get_byte_2
+		teq	ip, #0
+		beq	.Lc2u_finished
+		cmp	ip, #2
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
+		movge	r3, r7, get_byte_3
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
+		ldrgtb	r3, [r1], #0
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
+		b	.Lc2u_finished
+
+.Lc2u_3fupi:	subs	r2, r2, #4
+		addmi	ip, r2, #4
+		bmi	.Lc2u_3nowords
+		mov	r3, r7, pull #24
+		ldr	r7, [r1], #4
+		orr	r3, r3, r7, push #8
+USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
+		mov	ip, r0, lsl #32 - PAGE_SHIFT
+		rsb	ip, ip, #0
+		movs	ip, ip, lsr #32 - PAGE_SHIFT
+		beq	.Lc2u_3fupi
+		cmp	r2, ip
+		movlt	ip, r2
+		sub	r2, r2, ip
+		subs	ip, ip, #16
+		blt	.Lc2u_3rem8lp
+
+.Lc2u_3cpy8lp:	mov	r3, r7, pull #24
+		ldmia	r1!, {r4 - r7}
+		subs	ip, ip, #16
+		orr	r3, r3, r4, push #8
+		mov	r4, r4, pull #24
+		orr	r4, r4, r5, push #8
+		mov	r5, r5, pull #24
+		orr	r5, r5, r6, push #8
+		mov	r6, r6, pull #24
+		orr	r6, r6, r7, push #8
+		stmia	r0!, {r3 - r6}			@ Shouldnt fault
+		bpl	.Lc2u_3cpy8lp
+
+.Lc2u_3rem8lp:	tst	ip, #8
+		movne	r3, r7, pull #24
+		ldmneia	r1!, {r4, r7}
+		orrne	r3, r3, r4, push #8
+		movne	r4, r4, pull #24
+		orrne	r4, r4, r7, push #8
+		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
+		tst	ip, #4
+		movne	r3, r7, pull #24
+		ldrne	r7, [r1], #4
+		orrne	r3, r3, r7, push #8
+	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
+		ands	ip, ip, #3
+		beq	.Lc2u_3fupi
+.Lc2u_3nowords:	mov	r3, r7, get_byte_3
+		teq	ip, #0
+		beq	.Lc2u_finished
+		cmp	ip, #2
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
+		ldrgeb	r3, [r1], #1
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
+		ldrgtb	r3, [r1], #0
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
+		b	.Lc2u_finished
+ENDPROC(__copy_to_user)
+
+		.pushsection .fixup,"ax"
+		.align	0
+9001:		ldmfd	sp!, {r0, r4 - r7, pc}
+		.popsection
+
+/* Prototype: unsigned long __copy_from_user(void *to,const void *from,unsigned long n);
+ * Purpose  : copy a block from user memory to kernel memory
+ * Params   : to   - kernel memory
+ *          : from - user memory
+ *          : n    - number of bytes to copy
+ * Returns  : Number of bytes NOT copied.
+ */
+.Lcfu_dest_not_aligned:
+		rsb	ip, ip, #4
+		cmp	ip, #2
+USER(	TUSER(	ldrb)	r3, [r1], #1)			@ May fault
+		strb	r3, [r0], #1
+USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
+		strgeb	r3, [r0], #1
+USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
+		strgtb	r3, [r0], #1
+		sub	r2, r2, ip
+		b	.Lcfu_dest_aligned
+
+ENTRY(__copy_from_user)
+		stmfd	sp!, {r0, r2, r4 - r7, lr}
+		cmp	r2, #4
+		blt	.Lcfu_not_enough
+		ands	ip, r0, #3
+		bne	.Lcfu_dest_not_aligned
+.Lcfu_dest_aligned:
+		ands	ip, r1, #3
+		bne	.Lcfu_src_not_aligned
+
+/*
+ * Seeing as there has to be at least 8 bytes to copy, we can
+ * copy one word, and force a user-mode page fault...
+ */
+
+.Lcfu_0fupi:	subs	r2, r2, #4
+		addmi	ip, r2, #4
+		bmi	.Lcfu_0nowords
+USER(	TUSER(	ldr)	r3, [r1], #4)
+		str	r3, [r0], #4
+		mov	ip, r1, lsl #32 - PAGE_SHIFT	@ On each page, use a ld/st??t instruction
+		rsb	ip, ip, #0
+		movs	ip, ip, lsr #32 - PAGE_SHIFT
+		beq	.Lcfu_0fupi
+/*
+ * ip = max no. of bytes to copy before needing another "strt" insn
+ */
+		cmp	r2, ip
+		movlt	ip, r2
+		sub	r2, r2, ip
+		subs	ip, ip, #32
+		blt	.Lcfu_0rem8lp
+
+.Lcfu_0cpy8lp:	ldmia	r1!, {r3 - r6}			@ Shouldnt fault
+		stmia	r0!, {r3 - r6}
+		ldmia	r1!, {r3 - r6}			@ Shouldnt fault
+		subs	ip, ip, #32
+		stmia	r0!, {r3 - r6}
+		bpl	.Lcfu_0cpy8lp
+
+.Lcfu_0rem8lp:	cmn	ip, #16
+		ldmgeia	r1!, {r3 - r6}			@ Shouldnt fault
+		stmgeia	r0!, {r3 - r6}
+		tst	ip, #8
+		ldmneia	r1!, {r3 - r4}			@ Shouldnt fault
+		stmneia	r0!, {r3 - r4}
+		tst	ip, #4
+	TUSER(	ldrne) r3, [r1], #4			@ Shouldnt fault
+		strne	r3, [r0], #4
+		ands	ip, ip, #3
+		beq	.Lcfu_0fupi
+.Lcfu_0nowords:	teq	ip, #0
+		beq	.Lcfu_finished
+.Lcfu_nowords:	cmp	ip, #2
+USER(	TUSER(	ldrb)	r3, [r1], #1)			@ May fault
+		strb	r3, [r0], #1
+USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
+		strgeb	r3, [r0], #1
+USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
+		strgtb	r3, [r0], #1
+		b	.Lcfu_finished
+
+.Lcfu_not_enough:
+		movs	ip, r2
+		bne	.Lcfu_nowords
+.Lcfu_finished:	mov	r0, #0
+		add	sp, sp, #8
+		ldmfd	sp!, {r4 - r7, pc}
+
+.Lcfu_src_not_aligned:
+		bic	r1, r1, #3
+USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
+		cmp	ip, #2
+		bgt	.Lcfu_3fupi
+		beq	.Lcfu_2fupi
+.Lcfu_1fupi:	subs	r2, r2, #4
+		addmi	ip, r2, #4
+		bmi	.Lcfu_1nowords
+		mov	r3, r7, pull #8
+USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
+		orr	r3, r3, r7, push #24
+		str	r3, [r0], #4
+		mov	ip, r1, lsl #32 - PAGE_SHIFT
+		rsb	ip, ip, #0
+		movs	ip, ip, lsr #32 - PAGE_SHIFT
+		beq	.Lcfu_1fupi
+		cmp	r2, ip
+		movlt	ip, r2
+		sub	r2, r2, ip
+		subs	ip, ip, #16
+		blt	.Lcfu_1rem8lp
+
+.Lcfu_1cpy8lp:	mov	r3, r7, pull #8
+		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
+		subs	ip, ip, #16
+		orr	r3, r3, r4, push #24
+		mov	r4, r4, pull #8
+		orr	r4, r4, r5, push #24
+		mov	r5, r5, pull #8
+		orr	r5, r5, r6, push #24
+		mov	r6, r6, pull #8
+		orr	r6, r6, r7, push #24
+		stmia	r0!, {r3 - r6}
+		bpl	.Lcfu_1cpy8lp
+
+.Lcfu_1rem8lp:	tst	ip, #8
+		movne	r3, r7, pull #8
+		ldmneia	r1!, {r4, r7}			@ Shouldnt fault
+		orrne	r3, r3, r4, push #24
+		movne	r4, r4, pull #8
+		orrne	r4, r4, r7, push #24
+		stmneia	r0!, {r3 - r4}
+		tst	ip, #4
+		movne	r3, r7, pull #8
+USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
+		orrne	r3, r3, r7, push #24
+		strne	r3, [r0], #4
+		ands	ip, ip, #3
+		beq	.Lcfu_1fupi
+.Lcfu_1nowords:	mov	r3, r7, get_byte_1
+		teq	ip, #0
+		beq	.Lcfu_finished
+		cmp	ip, #2
+		strb	r3, [r0], #1
+		movge	r3, r7, get_byte_2
+		strgeb	r3, [r0], #1
+		movgt	r3, r7, get_byte_3
+		strgtb	r3, [r0], #1
+		b	.Lcfu_finished
+
+.Lcfu_2fupi:	subs	r2, r2, #4
+		addmi	ip, r2, #4
+		bmi	.Lcfu_2nowords
+		mov	r3, r7, pull #16
+USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
+		orr	r3, r3, r7, push #16
+		str	r3, [r0], #4
+		mov	ip, r1, lsl #32 - PAGE_SHIFT
+		rsb	ip, ip, #0
+		movs	ip, ip, lsr #32 - PAGE_SHIFT
+		beq	.Lcfu_2fupi
+		cmp	r2, ip
+		movlt	ip, r2
+		sub	r2, r2, ip
+		subs	ip, ip, #16
+		blt	.Lcfu_2rem8lp
+
+
+.Lcfu_2cpy8lp:	mov	r3, r7, pull #16
+		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
+		subs	ip, ip, #16
+		orr	r3, r3, r4, push #16
+		mov	r4, r4, pull #16
+		orr	r4, r4, r5, push #16
+		mov	r5, r5, pull #16
+		orr	r5, r5, r6, push #16
+		mov	r6, r6, pull #16
+		orr	r6, r6, r7, push #16
+		stmia	r0!, {r3 - r6}
+		bpl	.Lcfu_2cpy8lp
+
+.Lcfu_2rem8lp:	tst	ip, #8
+		movne	r3, r7, pull #16
+		ldmneia	r1!, {r4, r7}			@ Shouldnt fault
+		orrne	r3, r3, r4, push #16
+		movne	r4, r4, pull #16
+		orrne	r4, r4, r7, push #16
+		stmneia	r0!, {r3 - r4}
+		tst	ip, #4
+		movne	r3, r7, pull #16
+USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
+		orrne	r3, r3, r7, push #16
+		strne	r3, [r0], #4
+		ands	ip, ip, #3
+		beq	.Lcfu_2fupi
+.Lcfu_2nowords:	mov	r3, r7, get_byte_2
+		teq	ip, #0
+		beq	.Lcfu_finished
+		cmp	ip, #2
+		strb	r3, [r0], #1
+		movge	r3, r7, get_byte_3
+		strgeb	r3, [r0], #1
+USER(	TUSER(	ldrgtb) r3, [r1], #0)			@ May fault
+		strgtb	r3, [r0], #1
+		b	.Lcfu_finished
+
+.Lcfu_3fupi:	subs	r2, r2, #4
+		addmi	ip, r2, #4
+		bmi	.Lcfu_3nowords
+		mov	r3, r7, pull #24
+USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
+		orr	r3, r3, r7, push #8
+		str	r3, [r0], #4
+		mov	ip, r1, lsl #32 - PAGE_SHIFT
+		rsb	ip, ip, #0
+		movs	ip, ip, lsr #32 - PAGE_SHIFT
+		beq	.Lcfu_3fupi
+		cmp	r2, ip
+		movlt	ip, r2
+		sub	r2, r2, ip
+		subs	ip, ip, #16
+		blt	.Lcfu_3rem8lp
+
+.Lcfu_3cpy8lp:	mov	r3, r7, pull #24
+		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
+		orr	r3, r3, r4, push #8
+		mov	r4, r4, pull #24
+		orr	r4, r4, r5, push #8
+		mov	r5, r5, pull #24
+		orr	r5, r5, r6, push #8
+		mov	r6, r6, pull #24
+		orr	r6, r6, r7, push #8
+		stmia	r0!, {r3 - r6}
+		subs	ip, ip, #16
+		bpl	.Lcfu_3cpy8lp
+
+.Lcfu_3rem8lp:	tst	ip, #8
+		movne	r3, r7, pull #24
+		ldmneia	r1!, {r4, r7}			@ Shouldnt fault
+		orrne	r3, r3, r4, push #8
+		movne	r4, r4, pull #24
+		orrne	r4, r4, r7, push #8
+		stmneia	r0!, {r3 - r4}
+		tst	ip, #4
+		movne	r3, r7, pull #24
+USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
+		orrne	r3, r3, r7, push #8
+		strne	r3, [r0], #4
+		ands	ip, ip, #3
+		beq	.Lcfu_3fupi
+.Lcfu_3nowords:	mov	r3, r7, get_byte_3
+		teq	ip, #0
+		beq	.Lcfu_finished
+		cmp	ip, #2
+		strb	r3, [r0], #1
+USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
+		strgeb	r3, [r0], #1
+USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
+		strgtb	r3, [r0], #1
+		b	.Lcfu_finished
+ENDPROC(__copy_from_user)
+
+		.pushsection .fixup,"ax"
+		.align	0
+		/*
+		 * We took an exception.  r0 contains a pointer to
+		 * the byte not copied.
+		 */
+9001:		ldr	r2, [sp], #4			@ void *to
+		sub	r2, r0, r2			@ bytes copied
+		ldr	r1, [sp], #4			@ unsigned long count
+		subs	r4, r1, r2			@ bytes left to copy
+		movne	r1, r4
+		blne	__memzero
+		mov	r0, r4
+		ldmfd	sp!, {r4 - r7, pc}
+		.popsection
+

arch/arm/mach-dove/common.c

@@ -102,7 +102,8 @@ void __init dove_ehci1_init(void)
 void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data, DOVE_GE00_PHYS_BASE,
-			IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR);
+			IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR,
+			1600);
 }
 
 /*****************************************************************************

arch/arm/mach-exynos/mach-origen.c

@@ -42,6 +42,7 @@
 #include <plat/backlight.h>
 #include <plat/fb.h>
 #include <plat/mfc.h>
+#include <plat/hdmi.h>
 
 #include <mach/ohci.h>
 #include <mach/map.h>
@@ -734,6 +735,11 @@ static void __init origen_bt_setup(void)
 	s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE);
 }
 
+/* I2C module and id for HDMIPHY */
+static struct i2c_board_info hdmiphy_info = {
+	I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
+};
+
 static void s5p_tv_setup(void)
 {
 	/* Direct HPD to HDMI chip */
@@ -781,6 +787,7 @@ static void __init origen_machine_init(void)
 
 	s5p_tv_setup();
 	s5p_i2c_hdmiphy_set_platdata(NULL);
+	s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
 
 #ifdef CONFIG_DRM_EXYNOS
 	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;

arch/arm/mach-exynos/mach-smdkv310.c

@@ -40,6 +40,7 @@
 #include <plat/mfc.h>
 #include <plat/ehci.h>
 #include <plat/clock.h>
+#include <plat/hdmi.h>
 
 #include <mach/map.h>
 #include <mach/ohci.h>
@@ -354,6 +355,11 @@ static struct platform_pwm_backlight_data smdkv310_bl_data = {
 	.pwm_period_ns  = 1000,
 };
 
+/* I2C module and id for HDMIPHY */
+static struct i2c_board_info hdmiphy_info = {
+	I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
+};
+
 static void s5p_tv_setup(void)
 {
 	/* direct HPD to HDMI chip */
@@ -388,6 +394,7 @@ static void __init smdkv310_machine_init(void)
 
 	s5p_tv_setup();
 	s5p_i2c_hdmiphy_set_platdata(NULL);
+	s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
 
 	samsung_keypad_set_platdata(&smdkv310_keypad_data);
 

arch/arm/mach-imx/Makefile

@@ -9,7 +9,8 @@ obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o
 obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
 obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
 
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
+imx5-pm-$(CONFIG_PM) += pm-imx5.o
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o
 
 obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
 			    clk-pfd.o clk-busy.o
@@ -70,14 +71,13 @@ obj-$(CONFIG_DEBUG_LL) += lluart.o
 obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
 obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
 obj-$(CONFIG_HAVE_IMX_SRC) += src.o
-obj-$(CONFIG_CPU_V7) += head-v7.o
-AFLAGS_head-v7.o :=-Wa,-march=armv7-a
-obj-$(CONFIG_SMP) += platsmp.o
+AFLAGS_headsmp.o :=-Wa,-march=armv7-a
+obj-$(CONFIG_SMP) += headsmp.o platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
 obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
 
 ifeq ($(CONFIG_PM),y)
-obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o
+obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
 endif
 
 # i.MX5 based machines

arch/arm/mach-imx/clk-imx6q.c

@@ -152,7 +152,7 @@ enum mx6q_clks {
 	ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
 	usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
 	pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
-	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2,
+	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
 	clk_max
 };
 
@@ -288,8 +288,10 @@ int __init mx6q_clocks_init(void)
 	clk[gpu3d_shader]     = imx_clk_divider("gpu3d_shader",     "gpu3d_shader_sel",  base + 0x18, 29, 3);
 	clk[ipu1_podf]        = imx_clk_divider("ipu1_podf",        "ipu1_sel",          base + 0x3c, 11, 3);
 	clk[ipu2_podf]        = imx_clk_divider("ipu2_podf",        "ipu2_sel",          base + 0x3c, 16, 3);
-	clk[ldb_di0_podf]     = imx_clk_divider("ldb_di0_podf",     "ldb_di0_sel",       base + 0x20, 10, 1);
-	clk[ldb_di1_podf]     = imx_clk_divider("ldb_di1_podf",     "ldb_di1_sel",       base + 0x20, 11, 1);
+	clk[ldb_di0_div_3_5]  = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
+	clk[ldb_di0_podf]     = imx_clk_divider("ldb_di0_podf",     "ldb_di0_div_3_5",       base + 0x20, 10, 1);
+	clk[ldb_di1_div_3_5]  = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
+	clk[ldb_di1_podf]     = imx_clk_divider("ldb_di1_podf",     "ldb_di1_div_3_5",   base + 0x20, 11, 1);
 	clk[ipu1_di0_pre]     = imx_clk_divider("ipu1_di0_pre",     "ipu1_di0_pre_sel",  base + 0x34, 3,  3);
 	clk[ipu1_di1_pre]     = imx_clk_divider("ipu1_di1_pre",     "ipu1_di1_pre_sel",  base + 0x34, 12, 3);
 	clk[ipu2_di0_pre]     = imx_clk_divider("ipu2_di0_pre",     "ipu2_di0_pre_sel",  base + 0x38, 3,  3);

arch/arm/mach-imx/hotplug.c

@@ -42,22 +42,6 @@ static inline void cpu_enter_lowpower(void)
 	  : "cc");
 }
 
-static inline void cpu_leave_lowpower(void)
-{
-	unsigned int v;
-
-	asm volatile(
-		"mrc	p15, 0, %0, c1, c0, 0\n"
-	"	orr	%0, %0, %1\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	orr	%0, %0, %2\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	  : "=&r" (v)
-	  : "Ir" (CR_C), "Ir" (0x40)
-	  : "cc");
-}
-
 /*
  * platform-specific code to shutdown a CPU
  *
@@ -67,11 +51,10 @@ void platform_cpu_die(unsigned int cpu)
 {
 	cpu_enter_lowpower();
 	imx_enable_cpu(cpu, false);
-	cpu_do_idle();
-	cpu_leave_lowpower();
 
-	/* We should never return from idle */
-	panic("cpu %d unexpectedly exit from shutdown\n", cpu);
+	/* spin here until hardware takes it down */
+	while (1)
+		;
 }
 
 int platform_cpu_disable(unsigned int cpu)

arch/arm/mach-imx/mach-imx6q.c

@@ -71,7 +71,7 @@ soft:
 /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
 static int ksz9021rn_phy_fixup(struct phy_device *phydev)
 {
-	if (IS_ENABLED(CONFIG_PHYLIB)) {
+	if (IS_BUILTIN(CONFIG_PHYLIB)) {
 		/* min rx data delay */
 		phy_write(phydev, 0x0b, 0x8105);
 		phy_write(phydev, 0x0c, 0x0000);
@@ -112,7 +112,7 @@ put_clk:
 
 static void __init imx6q_sabrelite_init(void)
 {
-	if (IS_ENABLED(CONFIG_PHYLIB))
+	if (IS_BUILTIN(CONFIG_PHYLIB))
 		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
 				ksz9021rn_phy_fixup);
 	imx6q_sabrelite_cko1_setup();

arch/arm/mach-kirkwood/Makefile.boot

@@ -7,7 +7,8 @@ dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb
 dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb
 dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb
 dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb
-dtb-$(CONFIG_MACH_TS219_DT)	+= kirkwood-qnap-ts219.dtb
+dtb-$(CONFIG_MACH_TS219_DT)	+= kirkwood-ts219-6281.dtb
+dtb-$(CONFIG_MACH_TS219_DT)	+= kirkwood-ts219-6282.dtb
 dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb
 dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb
 dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb

arch/arm/mach-kirkwood/common.c

@@ -301,7 +301,7 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data,
 			GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
-			IRQ_KIRKWOOD_GE00_ERR);
+			IRQ_KIRKWOOD_GE00_ERR, 1600);
 	/* The interface forgets the MAC address assigned by u-boot if
 	the clock is turned off, so claim the clk now. */
 	clk_prepare_enable(ge0);
@@ -315,7 +315,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge01_init(eth_data,
 			GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
-			IRQ_KIRKWOOD_GE01_ERR);
+			IRQ_KIRKWOOD_GE01_ERR, 1600);
 	clk_prepare_enable(ge1);
 }
 

arch/arm/mach-mmp/sram.c

@@ -68,7 +68,7 @@ static int __devinit sram_probe(struct platform_device *pdev)
 	struct resource *res;
 	int ret = 0;
 
-	if (!pdata && !pdata->pool_name)
+	if (!pdata || !pdata->pool_name)
 		return -ENODEV;
 
 	info = kzalloc(sizeof(*info), GFP_KERNEL);

arch/arm/mach-mv78xx0/addr-map.c

@@ -37,7 +37,7 @@
 #define WIN0_OFF(n)		(BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
 #define WIN8_OFF(n)		(BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4))
 
-static void __init __iomem *win_cfg_base(int win)
+static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
 {
 	/*
 	 * Find the control register base address for this window.

arch/arm/mach-mv78xx0/common.c

@@ -213,7 +213,8 @@ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data,
 			GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM,
-			IRQ_MV78XX0_GE_ERR);
+			IRQ_MV78XX0_GE_ERR,
+			MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
 
 
@@ -224,7 +225,8 @@ void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge01_init(eth_data,
 			GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM,
-			NO_IRQ);
+			NO_IRQ,
+			MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
 
 

arch/arm/mach-omap2/Kconfig

@@ -62,13 +62,14 @@ config ARCH_OMAP4
 	select PM_OPP if PM
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 	select ARM_CPU_SUSPEND if PM
-	select ARCH_NEEDS_CPU_IDLE_COUPLED
+	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
 
 config SOC_OMAP5
 	bool "TI OMAP5"
 	select CPU_V7
 	select ARM_GIC
 	select HAVE_SMP
+	select ARM_CPU_SUSPEND if PM
 
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2

arch/arm/mach-omap2/board-igep0020.c

@@ -554,6 +554,8 @@ static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = {
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
+	/* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */
+	OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 #endif

arch/arm/mach-omap2/board-omap3evm.c

@@ -58,6 +58,7 @@
 #include "hsmmc.h"
 #include "common-board-devices.h"
 
+#define OMAP3_EVM_TS_GPIO	175
 #define OMAP3_EVM_EHCI_VBUS	22
 #define OMAP3_EVM_EHCI_SELECT	61
 

arch/arm/mach-omap2/common-board-devices.c

@@ -35,16 +35,6 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = {
 	.turbo_mode	= 0,
 };
 
-/*
- * ADS7846 driver maybe request a gpio according to the value
- * of pdata->get_pendown_state, but we have done this. So set
- * get_pendown_state to avoid twice gpio requesting.
- */
-static int omap3_get_pendown_state(void)
-{
-	return !gpio_get_value(OMAP3_EVM_TS_GPIO);
-}
-
 static struct ads7846_platform_data ads7846_config = {
 	.x_max			= 0x0fff,
 	.y_max			= 0x0fff,
@@ -55,7 +45,6 @@ static struct ads7846_platform_data ads7846_config = {
 	.debounce_rep		= 1,
 	.gpio_pendown		= -EINVAL,
 	.keep_vref_on		= 1,
-	.get_pendown_state	= &omap3_get_pendown_state,
 };
 
 static struct spi_board_info ads7846_spi_board_info __initdata = {

arch/arm/mach-omap2/common-board-devices.h

@@ -4,7 +4,6 @@
 #include "twl-common.h"
 
 #define NAND_BLOCK_SIZE	SZ_128K
-#define OMAP3_EVM_TS_GPIO	175
 
 struct mtd_partition;
 struct ads7846_platform_data;

arch/arm/mach-omap2/cpuidle44xx.c

@@ -238,8 +238,9 @@ int __init omap4_idle_init(void)
 	for_each_cpu(cpu_id, cpu_online_mask) {
 		dev = &per_cpu(omap4_idle_dev, cpu_id);
 		dev->cpu = cpu_id;
+#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
 		dev->coupled_cpus = *cpu_online_mask;
-
+#endif
 		cpuidle_register_driver(&omap4_idle_driver);
 
 		if (cpuidle_register_device(dev)) {

arch/arm/mach-omap2/mux.h

@@ -127,7 +127,6 @@ struct omap_mux_partition {
  * @gpio:	GPIO number
  * @muxnames:	available signal modes for a ball
  * @balls:	available balls on the package
- * @partition:	mux partition
  */
 struct omap_mux {
 	u16	reg_offset;

arch/arm/mach-omap2/opp4xxx_data.c

@@ -94,7 +94,7 @@ int __init omap4_opp_init(void)
 {
 	int r = -ENODEV;
 
-	if (!cpu_is_omap44xx())
+	if (!cpu_is_omap443x())
 		return r;
 
 	r = omap_init_opp_table(omap44xx_opp_def_list,

arch/arm/mach-omap2/pm34xx.c

@@ -272,21 +272,16 @@ void omap_sram_idle(void)
 	per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
 	core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
 
-	if (mpu_next_state < PWRDM_POWER_ON) {
-		pwrdm_pre_transition(mpu_pwrdm);
-		pwrdm_pre_transition(neon_pwrdm);
-	}
+	pwrdm_pre_transition(NULL);
 
 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
-		pwrdm_pre_transition(per_pwrdm);
 		per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
 		omap2_gpio_prepare_for_idle(per_going_off);
 	}
 
 	/* CORE */
 	if (core_next_state < PWRDM_POWER_ON) {
-		pwrdm_pre_transition(core_pwrdm);
 		if (core_next_state == PWRDM_POWER_OFF) {
 			omap3_core_save_context();
 			omap3_cm_save_context();
@@ -339,20 +334,14 @@ void omap_sram_idle(void)
 			omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
 					       OMAP3430_GR_MOD,
 					       OMAP3_PRM_VOLTCTRL_OFFSET);
-		pwrdm_post_transition(core_pwrdm);
 	}
 	omap3_intc_resume_idle();
 
-	/* PER */
-	if (per_next_state < PWRDM_POWER_ON) {
-		omap2_gpio_resume_after_idle();
-		pwrdm_post_transition(per_pwrdm);
-	}
+	pwrdm_post_transition(NULL);
 
-	if (mpu_next_state < PWRDM_POWER_ON) {
-		pwrdm_post_transition(mpu_pwrdm);
-		pwrdm_post_transition(neon_pwrdm);
-	}
+	/* PER */
+	if (per_next_state < PWRDM_POWER_ON)
+		omap2_gpio_resume_after_idle();
 }
 
 static void omap3_pm_idle(void)

arch/arm/mach-omap2/sleep44xx.S

@@ -56,9 +56,13 @@ ppa_por_params:
  * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET.
  * It returns to the caller for CPU INACTIVE and ON power states or in case
  * CPU failed to transition to targeted OFF/DORMANT state.
+ *
+ * omap4_finish_suspend() calls v7_flush_dcache_all() which doesn't save
+ * stack frame and it expects the caller to take care of it. Hence the entire
+ * stack frame is saved to avoid possible stack corruption.
  */
 ENTRY(omap4_finish_suspend)
-	stmfd	sp!, {lr}
+	stmfd	sp!, {r4-r12, lr}
 	cmp	r0, #0x0
 	beq	do_WFI				@ No lowpower state, jump to WFI
 
@@ -226,7 +230,7 @@ scu_gp_clear:
 skip_scu_gp_clear:
 	isb
 	dsb
-	ldmfd	sp!, {pc}
+	ldmfd	sp!, {r4-r12, pc}
 ENDPROC(omap4_finish_suspend)
 
 /*

arch/arm/mach-omap2/twl-common.c

@@ -67,6 +67,7 @@ void __init omap_pmic_init(int bus, u32 clkrate,
 			   const char *pmic_type, int pmic_irq,
 			   struct twl4030_platform_data *pmic_data)
 {
+	omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
 	strncpy(pmic_i2c_board_info.type, pmic_type,
 		sizeof(pmic_i2c_board_info.type));
 	pmic_i2c_board_info.irq = pmic_irq;

arch/arm/mach-orion5x/common.c

@@ -109,7 +109,8 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data,
 			ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM,
-			IRQ_ORION5X_ETH_ERR);
+			IRQ_ORION5X_ETH_ERR,
+			MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
 
 

arch/arm/mach-s3c24xx/include/mach/dma.h

@@ -24,7 +24,8 @@
 */
 
 enum dma_ch {
-	DMACH_XD0,
+	DMACH_DT_PROP = -1,	/* not yet supported, do not use */
+	DMACH_XD0 = 0,
 	DMACH_XD1,
 	DMACH_SDI,
 	DMACH_SPI0,

arch/arm/mach-ux500/Kconfig

@@ -41,7 +41,6 @@ config MACH_HREFV60
 config MACH_SNOWBALL
 	bool "U8500 Snowball platform"
 	select MACH_MOP500
-	select LEDS_GPIO
 	help
 	  Include support for the snowball development platform.
 

arch/arm/mach-ux500/board-mop500-msp.c

@@ -191,9 +191,9 @@ static struct platform_device *db8500_add_msp_i2s(struct device *parent,
 	return pdev;
 }
 
-/* Platform device for ASoC U8500 machine */
-static struct platform_device snd_soc_u8500 = {
-		.name = "snd-soc-u8500",
+/* Platform device for ASoC MOP500 machine */
+static struct platform_device snd_soc_mop500 = {
+		.name = "snd-soc-mop500",
 		.id = 0,
 		.dev = {
 			.platform_data = NULL,
@@ -227,8 +227,8 @@ int mop500_msp_init(struct device *parent)
 {
 	struct platform_device *msp1;
 
-	pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__);
-	platform_device_register(&snd_soc_u8500);
+	pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__);
+	platform_device_register(&snd_soc_mop500);
 
 	pr_info("Initialize MSP I2S-devices.\n");
 	db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0,

arch/arm/mach-ux500/board-mop500.c

@@ -797,6 +797,7 @@ static void __init u8500_init_machine(void)
 				ARRAY_SIZE(mop500_platform_devs));
 
 		mop500_sdi_init(parent);
+		mop500_msp_init(parent);
 		i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 		i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
 		i2c_register_board_info(2, mop500_i2c2_devices,
@@ -804,6 +805,8 @@ static void __init u8500_init_machine(void)
 
 		mop500_uib_init();
 
+	} else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
+		mop500_msp_init(parent);
 	} else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
 		/*
 		 * The HREFv60 board removed a GPIO expander and routed
@@ -815,6 +818,7 @@ static void __init u8500_init_machine(void)
 				ARRAY_SIZE(mop500_platform_devs));
 
 		hrefv60_sdi_init(parent);
+		mop500_msp_init(parent);
 
 		i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 		i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;

arch/arm/mm/flush.c

@@ -231,8 +231,6 @@ void __sync_icache_dcache(pte_t pteval)
 	struct page *page;
 	struct address_space *mapping;
 
-	if (!pte_present_user(pteval))
-		return;
 	if (cache_is_vipt_nonaliasing() && !pte_exec(pteval))
 		/* only flush non-aliasing VIPT caches for exec mappings */
 		return;

arch/arm/mm/tlb-v7.S

@@ -38,10 +38,10 @@ ENTRY(v7wbi_flush_user_tlb_range)
 	dsb
 	mov	r0, r0, lsr #PAGE_SHIFT		@ align address
 	mov	r1, r1, lsr #PAGE_SHIFT
-#ifdef CONFIG_ARM_ERRATA_720789
-	mov	r3, #0
-#else
 	asid	r3, r3				@ mask ASID
+#ifdef CONFIG_ARM_ERRATA_720789
+	ALT_SMP(W(mov)	r3, #0	)
+	ALT_UP(W(nop)		)
 #endif
 	orr	r0, r3, r0, lsl #PAGE_SHIFT	@ Create initial MVA
 	mov	r1, r1, lsl #PAGE_SHIFT

arch/arm/plat-omap/dmtimer.c

@@ -189,6 +189,7 @@ struct omap_dm_timer *omap_dm_timer_request(void)
 		timer->reserved = 1;
 		break;
 	}
+	spin_unlock_irqrestore(&dm_timer_lock, flags);
 
 	if (timer) {
 		ret = omap_dm_timer_prepare(timer);
@@ -197,7 +198,6 @@ struct omap_dm_timer *omap_dm_timer_request(void)
 			timer = NULL;
 		}
 	}
-	spin_unlock_irqrestore(&dm_timer_lock, flags);
 
 	if (!timer)
 		pr_debug("%s: timer request failed!\n", __func__);
@@ -220,6 +220,7 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id)
 			break;
 		}
 	}
+	spin_unlock_irqrestore(&dm_timer_lock, flags);
 
 	if (timer) {
 		ret = omap_dm_timer_prepare(timer);
@@ -228,7 +229,6 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id)
 			timer = NULL;
 		}
 	}
-	spin_unlock_irqrestore(&dm_timer_lock, flags);
 
 	if (!timer)
 		pr_debug("%s: timer%d request failed!\n", __func__, id);
@@ -258,7 +258,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_enable);
 
 void omap_dm_timer_disable(struct omap_dm_timer *timer)
 {
-	pm_runtime_put(&timer->pdev->dev);
+	pm_runtime_put_sync(&timer->pdev->dev);
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_disable);
 

arch/arm/plat-omap/include/plat/cpu.h

@@ -372,7 +372,8 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define cpu_class_is_omap1()	(cpu_is_omap7xx() || cpu_is_omap15xx() || \
 				cpu_is_omap16xx())
 #define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx() || \
-				cpu_is_omap44xx() || soc_is_omap54xx())
+				cpu_is_omap44xx() || soc_is_omap54xx() || \
+				soc_is_am33xx())
 
 /* Various silicon revisions for omap2 */
 #define OMAP242X_CLASS		0x24200024

arch/arm/plat-omap/include/plat/multi.h

@@ -108,4 +108,13 @@
 # endif
 #endif
 
+#ifdef CONFIG_SOC_AM33XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME am33xx
+# endif
+#endif
+
 #endif	/* __PLAT_OMAP_MULTI_H */

arch/arm/plat-omap/include/plat/uncompress.h

@@ -110,7 +110,7 @@ static inline void flush(void)
 	_DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT,	\
 		AM33XXUART##p)
 
-static inline void __arch_decomp_setup(unsigned long arch_id)
+static inline void arch_decomp_setup(void)
 {
 	int port = 0;
 
@@ -198,8 +198,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 	} while (0);
 }
 
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-
 /*
  * nothing to do
  */

arch/arm/plat-orion/common.c

@@ -291,10 +291,12 @@ static struct platform_device orion_ge00 = {
 void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err)
+			    unsigned long irq_err,
+			    unsigned int tx_csum_limit)
 {
 	fill_resources(&orion_ge00_shared, orion_ge00_shared_resources,
 		       mapbase + 0x2000, SZ_16K - 1, irq_err);
+	orion_ge00_shared_data.tx_csum_limit = tx_csum_limit;
 	ge_complete(&orion_ge00_shared_data,
 		    orion_ge00_resources, irq, &orion_ge00_shared,
 		    eth_data, &orion_ge00);
@@ -343,10 +345,12 @@ static struct platform_device orion_ge01 = {
 void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err)
+			    unsigned long irq_err,
+			    unsigned int tx_csum_limit)
 {
 	fill_resources(&orion_ge01_shared, orion_ge01_shared_resources,
 		       mapbase + 0x2000, SZ_16K - 1, irq_err);
+	orion_ge01_shared_data.tx_csum_limit = tx_csum_limit;
 	ge_complete(&orion_ge01_shared_data,
 		    orion_ge01_resources, irq, &orion_ge01_shared,
 		    eth_data, &orion_ge01);

arch/arm/plat-orion/include/plat/common.h

@@ -39,12 +39,14 @@ void __init orion_rtc_init(unsigned long mapbase,
 void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err);
+			    unsigned long irq_err,
+			    unsigned int tx_csum_limit);
 
 void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err);
+			    unsigned long irq_err,
+			    unsigned int tx_csum_limit);
 
 void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,

arch/arm/plat-s3c24xx/dma.c

@@ -430,7 +430,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
  * when necessary.
 */
 
-int s3c2410_dma_enqueue(unsigned int channel, void *id,
+int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
 			dma_addr_t data, int size)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);

arch/arm/plat-samsung/devs.c

@@ -32,6 +32,8 @@
 #include <linux/platform_data/s3c-hsudc.h>
 #include <linux/platform_data/s3c-hsotg.h>
 
+#include <media/s5p_hdmi.h>
+
 #include <asm/irq.h>
 #include <asm/pmu.h>
 #include <asm/mach/arch.h>
@@ -748,7 +750,8 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
 	if (!pd) {
 		pd = &default_i2c_data;
 
-		if (soc_is_exynos4210())
+		if (soc_is_exynos4210() ||
+		    soc_is_exynos4212() || soc_is_exynos4412())
 			pd->bus_num = 8;
 		else if (soc_is_s5pv210())
 			pd->bus_num = 3;
@@ -759,6 +762,30 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
 	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
 			       &s5p_device_i2c_hdmiphy);
 }
+
+struct s5p_hdmi_platform_data s5p_hdmi_def_platdata;
+
+void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info,
+				  struct i2c_board_info *mhl_info, int mhl_bus)
+{
+	struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata;
+
+	if (soc_is_exynos4210() ||
+	    soc_is_exynos4212() || soc_is_exynos4412())
+		pd->hdmiphy_bus = 8;
+	else if (soc_is_s5pv210())
+		pd->hdmiphy_bus = 3;
+	else
+		pd->hdmiphy_bus = 0;
+
+	pd->hdmiphy_info = hdmiphy_info;
+	pd->mhl_info = mhl_info;
+	pd->mhl_bus = mhl_bus;
+
+	s3c_set_platdata(pd, sizeof(struct s5p_hdmi_platform_data),
+			 &s5p_device_hdmi);
+}
+
 #endif /* CONFIG_S5P_DEV_I2C_HDMIPHY */
 
 /* I2S */

arch/arm/plat-samsung/include/plat/hdmi.h

@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_SAMSUNG_HDMI_H
+#define __PLAT_SAMSUNG_HDMI_H __FILE__
+
+extern void s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info,
+				  struct i2c_board_info *mhl_info, int mhl_bus);
+
+#endif /* __PLAT_SAMSUNG_HDMI_H */

arch/arm/plat-samsung/pm.c

@@ -74,7 +74,7 @@ unsigned char pm_uart_udivslot;
 
 #ifdef CONFIG_SAMSUNG_PM_DEBUG
 
-struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
+static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
 
 static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
 {

arch/arm/vfp/vfpmodule.c

@@ -719,8 +719,10 @@ static int __init vfp_init(void)
 			if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100)
 				elf_hwcap |= HWCAP_NEON;
 #endif
+#ifdef CONFIG_VFPv3
 			if ((fmrx(MVFR1) & 0xf0000000) == 0x10000000)
 				elf_hwcap |= HWCAP_VFPv4;
+#endif
 		}
 	}
 	return 0;

arch/c6x/Kconfig

@@ -6,6 +6,7 @@
 config C6X
 	def_bool y
 	select CLKDEV_LOOKUP
+	select GENERIC_ATOMIC64
 	select GENERIC_IRQ_SHOW
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_DMA_API_DEBUG

arch/c6x/include/asm/cache.h

@@ -1,7 +1,7 @@
 /*
  *  Port on Texas Instruments TMS320C6x architecture
  *
- *  Copyright (C) 2005, 2006, 2009, 2010 Texas Instruments Incorporated
+ *  Copyright (C) 2005, 2006, 2009, 2010, 2012 Texas Instruments Incorporated
  *  Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com)
  *
  *  This program is free software; you can redistribute it and/or modify
@@ -16,9 +16,14 @@
 /*
  * Cache line size
  */
-#define L1D_CACHE_BYTES   64
-#define L1P_CACHE_BYTES   32
-#define L2_CACHE_BYTES	  128
+#define L1D_CACHE_SHIFT   6
+#define L1D_CACHE_BYTES   (1 << L1D_CACHE_SHIFT)
+
+#define L1P_CACHE_SHIFT   5
+#define L1P_CACHE_BYTES   (1 << L1P_CACHE_SHIFT)
+
+#define L2_CACHE_SHIFT    7
+#define L2_CACHE_BYTES    (1 << L2_CACHE_SHIFT)
 
 /*
  * L2 used as cache
@@ -29,7 +34,8 @@
  * For practical reasons the L1_CACHE_BYTES defines should not be smaller than
  * the L2 line size
  */
-#define L1_CACHE_BYTES        L2_CACHE_BYTES
+#define L1_CACHE_SHIFT        L2_CACHE_SHIFT
+#define L1_CACHE_BYTES        (1 << L1_CACHE_SHIFT)
 
 #define L2_CACHE_ALIGN_LOW(x) \
 	(((x) & ~(L2_CACHE_BYTES - 1)))

arch/ia64/configs/generic_defconfig

@@ -234,5 +234,4 @@ CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRC_T10DIF=y
-CONFIG_MISC_DEVICES=y
 CONFIG_INTEL_IOMMU=y

arch/ia64/configs/gensparse_defconfig

@@ -209,4 +209,3 @@ CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_MUTEXES=y
 CONFIG_CRYPTO_MD5=y
-CONFIG_MISC_DEVICES=y

arch/m68k/Kconfig

@@ -5,6 +5,7 @@ config M68K
 	select HAVE_AOUT if MMU
 	select HAVE_GENERIC_HARDIRQS
 	select GENERIC_IRQ_SHOW
+	select GENERIC_ATOMIC64
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
 	select GENERIC_CPU_DEVICES
 	select GENERIC_STRNCPY_FROM_USER if MMU

arch/m68k/Kconfig.cpu

@@ -28,6 +28,7 @@ config COLDFIRE
 	select CPU_HAS_NO_BITFIELDS
 	select CPU_HAS_NO_MULDIV64
 	select GENERIC_CSUM
+	select HAVE_CLK
 
 endchoice
 
@@ -58,7 +59,6 @@ config MCPU32
 config M68020
 	bool "68020 support"
 	depends on MMU
-	select GENERIC_ATOMIC64
 	select CPU_HAS_ADDRESS_SPACES
 	help
 	  If you anticipate running this kernel on a computer with a MC68020
@@ -69,7 +69,6 @@ config M68020
 config M68030
 	bool "68030 support"
 	depends on MMU && !MMU_SUN3
-	select GENERIC_ATOMIC64
 	select CPU_HAS_ADDRESS_SPACES
 	help
 	  If you anticipate running this kernel on a computer with a MC68030
@@ -79,7 +78,6 @@ config M68030
 config M68040
 	bool "68040 support"
 	depends on MMU && !MMU_SUN3
-	select GENERIC_ATOMIC64
 	select CPU_HAS_ADDRESS_SPACES
 	help
 	  If you anticipate running this kernel on a computer with a MC68LC040
@@ -90,7 +88,6 @@ config M68040
 config M68060
 	bool "68060 support"
 	depends on MMU && !MMU_SUN3
-	select GENERIC_ATOMIC64
 	select CPU_HAS_ADDRESS_SPACES
 	help
 	  If you anticipate running this kernel on a computer with a MC68060

arch/mips/Kconfig

@@ -89,6 +89,7 @@ config ATH79
 	select CEVT_R4K
 	select CSRC_R4K
 	select DMA_NONCOHERENT
+	select HAVE_CLK
 	select IRQ_CPU
 	select MIPS_MACHINE
 	select SYS_HAS_CPU_MIPS32_R2

arch/mips/alchemy/board-mtx1.c

@@ -228,6 +228,8 @@ static int mtx1_pci_idsel(unsigned int devsel, int assert)
 	 * adapter on the mtx-1 "singleboard" variant. It triggers a custom
 	 * logic chip connected to EXT_IO3 (GPIO1) to suppress IDSEL signals.
 	 */
+	udelay(1);
+
 	if (assert && devsel != 0)
 		/* Suppress signal to Cardbus */
 		alchemy_gpio_set_value(1, 0);	/* set EXT_IO3 OFF */

arch/mips/ath79/dev-usb.c

@@ -145,6 +145,8 @@ static void __init ar7240_usb_setup(void)
 
 	ath79_ohci_resources[0].start = AR7240_OHCI_BASE;
 	ath79_ohci_resources[0].end = AR7240_OHCI_BASE + AR7240_OHCI_SIZE - 1;
+	ath79_ohci_resources[1].start = ATH79_CPU_IRQ_USB;
+	ath79_ohci_resources[1].end = ATH79_CPU_IRQ_USB;
 	platform_device_register(&ath79_ohci_device);
 }