Linux 3.5-rc3

Pull btrfs compile warning fixes from Chris Mason.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  Btrfs: cast devid to unsigned long long for printk %llu
  Btrfs: init old_generation in get_old_root

Documentation/networking/stmmac.txt

@@ -10,8 +10,8 @@ Currently this network device driver is for all STM embedded MAC/GMAC
 (i.e. 7xxx/5xxx SoCs), SPEAr (arm), Loongson1B (mips) and XLINX XC2V3000
 FF1152AMT0221 D1215994A VIRTEX FPGA board.
 
-DWC Ether MAC 10/100/1000 Universal version 3.60a (and older) and DWC Ether MAC 10/100
-Universal version 4.0 have been used for developing this driver.
+DWC Ether MAC 10/100/1000 Universal version 3.60a (and older) and DWC Ether
+MAC 10/100 Universal version 4.0 have been used for developing this driver.
 
 This driver supports both the platform bus and PCI.
 
@@ -54,27 +54,27 @@ net_device structure enabling the scatter/gather feature.
 When one or more packets are received, an interrupt happens. The interrupts
 are not queued so the driver has to scan all the descriptors in the ring during
 the receive process.
-This is based on NAPI so the interrupt handler signals only if there is work to be
-done, and it exits.
+This is based on NAPI so the interrupt handler signals only if there is work
+to be done, and it exits.
 Then the poll method will be scheduled at some future point.
 The incoming packets are stored, by the DMA, in a list of pre-allocated socket
 buffers in order to avoid the memcpy (Zero-copy).
 
 4.3) Timer-Driver Interrupt
-Instead of having the device that asynchronously notifies the frame receptions, the
-driver configures a timer to generate an interrupt at regular intervals.
-Based on the granularity of the timer, the frames that are received by the device
-will experience different levels of latency. Some NICs have dedicated timer
-device to perform this task. STMMAC can use either the RTC device or the TMU
-channel 2  on STLinux platforms.
+Instead of having the device that asynchronously notifies the frame receptions,
+the driver configures a timer to generate an interrupt at regular intervals.
+Based on the granularity of the timer, the frames that are received by the
+device will experience different levels of latency. Some NICs have dedicated
+timer device to perform this task. STMMAC can use either the RTC device or the
+TMU channel 2  on STLinux platforms.
 The timers frequency can be passed to the driver as parameter; when change it,
 take care of both hardware capability and network stability/performance impact.
-Several performance tests on STM platforms showed this optimisation allows to spare
-the CPU while having the maximum throughput.
+Several performance tests on STM platforms showed this optimisation allows to
+spare the CPU while having the maximum throughput.
 
 4.4) WOL
-Wake up on Lan feature through Magic and Unicast frames are supported for the GMAC
-core.
+Wake up on Lan feature through Magic and Unicast frames are supported for the
+GMAC core.
 
 4.5) DMA descriptors
 Driver handles both normal and enhanced descriptors. The latter has been only
@@ -106,7 +106,8 @@ Several driver's information can be passed through the platform
 These are included in the include/linux/stmmac.h header file
 and detailed below as well:
 
- struct plat_stmmacenet_data {
+struct plat_stmmacenet_data {
+	char *phy_bus_name;
 	int bus_id;
 	int phy_addr;
 	int interface;
@@ -124,19 +125,24 @@ and detailed below as well:
 	void (*bus_setup)(void __iomem *ioaddr);
 	int (*init)(struct platform_device *pdev);
 	void (*exit)(struct platform_device *pdev);
+	void *custom_cfg;
+	void *custom_data;
 	void *bsp_priv;
  };
 
 Where:
+ o phy_bus_name: phy bus name to attach to the stmmac.
  o bus_id: bus identifier.
  o phy_addr: the physical address can be passed from the platform.
 	    If it is set to -1 the driver will automatically
 	    detect it at run-time by probing all the 32 addresses.
  o interface: PHY device's interface.
  o mdio_bus_data: specific platform fields for the MDIO bus.
- o pbl: the Programmable Burst Length is maximum number of beats to
+ o dma_cfg: internal DMA parameters
+   o pbl: the Programmable Burst Length is maximum number of beats to
        be transferred in one DMA transaction.
        GMAC also enables the 4xPBL by default.
+   o fixed_burst/mixed_burst/burst_len
  o clk_csr: fixed CSR Clock range selection.
  o has_gmac: uses the GMAC core.
  o enh_desc: if sets the MAC will use the enhanced descriptor structure.
@@ -160,8 +166,9 @@ Where:
 	     this is sometime necessary on some platforms (e.g. ST boxes)
 	     where the HW needs to have set some PIO lines or system cfg
 	     registers.
- o custom_cfg: this is a custom configuration that can be passed while
-	      initialising the resources.
+ o custom_cfg/custom_data: this is a custom configuration that can be passed
+			   while initialising the resources.
+ o bsp_priv: another private poiter.
 
 For MDIO bus The we have:
 
@@ -180,7 +187,6 @@ Where:
  o irqs: list of IRQs, one per PHY.
  o probed_phy_irq: if irqs is NULL, use this for probed PHY.
 
-
 For DMA engine we have the following internal fields that should be
 tuned according to the HW capabilities.
 

MAINTAINERS

@@ -1646,11 +1646,11 @@ S:	Maintained
 F:	drivers/gpio/gpio-bt8xx.c
 
 BTRFS FILE SYSTEM
-M:	Chris Mason <chris.mason@oracle.com>
+M:	Chris Mason <chris.mason@fusionio.com>
 L:	linux-btrfs@vger.kernel.org
 W:	http://btrfs.wiki.kernel.org/
 Q:	http://patchwork.kernel.org/project/linux-btrfs/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs.git
 S:	Maintained
 F:	Documentation/filesystems/btrfs.txt
 F:	fs/btrfs/
@@ -1800,6 +1800,9 @@ F:	include/linux/cfag12864b.h
 CFG80211 and NL80211
 M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
+W:	http://wireless.kernel.org/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
 S:	Maintained
 F:	include/linux/nl80211.h
 F:	include/net/cfg80211.h
@@ -4349,7 +4352,8 @@ MAC80211
 M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
 S:	Maintained
 F:	Documentation/networking/mac80211-injection.txt
 F:	include/net/mac80211.h
@@ -4360,7 +4364,8 @@ M:	Stefano Brivio <stefano.brivio@polimi.it>
 M:	Mattias Nissler <mattias.nissler@gmx.de>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/en/developers/Documentation/mac80211/RateControl/PID
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
 S:	Maintained
 F:	net/mac80211/rc80211_pid*
 
@@ -5711,6 +5716,9 @@ F:	include/linux/remoteproc.h
 RFKILL
 M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
+W:	http://wireless.kernel.org/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
 S:	Maintained
 F:	Documentation/rfkill.txt
 F:	net/rfkill/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 5
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc3
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/arm/common/dmabounce.c

@@ -366,8 +366,8 @@ static int __dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr,
 	struct safe_buffer *buf;
 	unsigned long off;
 
-	dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n",
-		__func__, addr, off, sz, dir);
+	dev_dbg(dev, "%s(dma=%#x,sz=%zx,dir=%x)\n",
+		__func__, addr, sz, dir);
 
 	buf = find_safe_buffer_dev(dev, addr, __func__);
 	if (!buf)
@@ -377,8 +377,8 @@ static int __dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr,
 
 	BUG_ON(buf->direction != dir);
 
-	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
-		__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x off=%#lx) mapped to %p (dma=%#x)\n",
+		__func__, buf->ptr, virt_to_dma(dev, buf->ptr), off,
 		buf->safe, buf->safe_dma_addr);
 
 	DO_STATS(dev->archdata.dmabounce->bounce_count++);
@@ -406,8 +406,8 @@ static int __dmabounce_sync_for_device(struct device *dev, dma_addr_t addr,
 	struct safe_buffer *buf;
 	unsigned long off;
 
-	dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n",
-		__func__, addr, off, sz, dir);
+	dev_dbg(dev, "%s(dma=%#x,sz=%zx,dir=%x)\n",
+		__func__, addr, sz, dir);
 
 	buf = find_safe_buffer_dev(dev, addr, __func__);
 	if (!buf)
@@ -417,8 +417,8 @@ static int __dmabounce_sync_for_device(struct device *dev, dma_addr_t addr,
 
 	BUG_ON(buf->direction != dir);
 
-	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n",
-		__func__, buf->ptr, virt_to_dma(dev, buf->ptr),
+	dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x off=%#lx) mapped to %p (dma=%#x)\n",
+		__func__, buf->ptr, virt_to_dma(dev, buf->ptr), off,
 		buf->safe, buf->safe_dma_addr);
 
 	DO_STATS(dev->archdata.dmabounce->bounce_count++);

arch/arm/mach-omap2/display.c

@@ -271,9 +271,9 @@ static struct platform_device *create_simple_dss_pdev(const char *pdev_name,
 		goto err;
 	}
 
-	r = omap_device_register(pdev);
+	r = platform_device_add(pdev);
 	if (r) {
-		pr_err("Could not register omap_device for %s\n", pdev_name);
+		pr_err("Could not register platform_device for %s\n", pdev_name);
 		goto err;
 	}
 

arch/arm/mm/dma-mapping.c

@@ -228,7 +228,7 @@ static pte_t **consistent_pte;
 
 #define DEFAULT_CONSISTENT_DMA_SIZE SZ_2M
 
-unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE;
+static unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE;
 
 void __init init_consistent_dma_size(unsigned long size)
 {
@@ -321,7 +321,7 @@ static struct arm_vmregion_head coherent_head = {
 	.vm_list	= LIST_HEAD_INIT(coherent_head.vm_list),
 };
 
-size_t coherent_pool_size = DEFAULT_CONSISTENT_DMA_SIZE / 8;
+static size_t coherent_pool_size = DEFAULT_CONSISTENT_DMA_SIZE / 8;
 
 static int __init early_coherent_pool(char *p)
 {

arch/arm/mm/init.c

@@ -212,7 +212,7 @@ EXPORT_SYMBOL(arm_dma_zone_size);
  * allocations.  This must be the smallest DMA mask in the system,
  * so a successful GFP_DMA allocation will always satisfy this.
  */
-u32 arm_dma_limit;
+phys_addr_t arm_dma_limit;
 
 static void __init arm_adjust_dma_zone(unsigned long *size, unsigned long *hole,
 	unsigned long dma_size)

arch/arm/mm/mm.h

@@ -62,7 +62,7 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page
 #endif
 
 #ifdef CONFIG_ZONE_DMA
-extern u32 arm_dma_limit;
+extern phys_addr_t arm_dma_limit;
 #else
 #define arm_dma_limit ((u32)~0)
 #endif

arch/m68k/Kconfig

@@ -7,6 +7,8 @@ config M68K
 	select GENERIC_IRQ_SHOW
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS
 	select GENERIC_CPU_DEVICES
+	select GENERIC_STRNCPY_FROM_USER if MMU
+	select GENERIC_STRNLEN_USER if MMU
 	select FPU if MMU
 	select ARCH_USES_GETTIMEOFFSET if MMU && !COLDFIRE
 

arch/m68k/include/asm/Kbuild

@@ -1,2 +1,4 @@
 include include/asm-generic/Kbuild.asm
 header-y += cachectl.h
+
+generic-y += word-at-a-time.h

arch/m68k/include/asm/m528xsim.h

@@ -86,7 +86,7 @@
 /*
  *	QSPI module.
  */
-#define	MCFQSPI_IOBASE		(MCF_IPSBAR + 0x340)
+#define	MCFQSPI_BASE		(MCF_IPSBAR + 0x340)
 #define	MCFQSPI_SIZE		0x40
 
 #define	MCFQSPI_CS0		147

arch/m68k/include/asm/uaccess_mm.h

@@ -379,12 +379,15 @@ __constant_copy_to_user(void __user *to, const void *from, unsigned long n)
 #define copy_from_user(to, from, n)	__copy_from_user(to, from, n)
 #define copy_to_user(to, from, n)	__copy_to_user(to, from, n)
 
-long strncpy_from_user(char *dst, const char __user *src, long count);
-long strnlen_user(const char __user *src, long n);
+#define user_addr_max() \
+	(segment_eq(get_fs(), USER_DS) ? TASK_SIZE : ~0UL)
+
+extern long strncpy_from_user(char *dst, const char __user *src, long count);
+extern __must_check long strlen_user(const char __user *str);
+extern __must_check long strnlen_user(const char __user *str, long n);
+
 unsigned long __clear_user(void __user *to, unsigned long n);
 
 #define clear_user	__clear_user
 
-#define strlen_user(str) strnlen_user(str, 32767)
-
 #endif /* _M68K_UACCESS_H */

arch/m68k/kernel/ptrace.c

@@ -286,7 +286,7 @@ asmlinkage void syscall_trace(void)
 	}
 }
 
-#ifdef CONFIG_COLDFIRE
+#if defined(CONFIG_COLDFIRE) || !defined(CONFIG_MMU)
 asmlinkage int syscall_trace_enter(void)
 {
 	int ret = 0;

arch/m68k/kernel/time.c

@@ -85,7 +85,7 @@ void __init time_init(void)
 	mach_sched_init(timer_interrupt);
 }
 
-#ifdef CONFIG_M68KCLASSIC
+#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET
 
 u32 arch_gettimeoffset(void)
 {
@@ -108,4 +108,4 @@ static int __init rtc_init(void)
 
 module_init(rtc_init);
 
-#endif /* CONFIG_M68KCLASSIC */
+#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */

arch/m68k/lib/uaccess.c

@@ -103,80 +103,6 @@ unsigned long __generic_copy_to_user(void __user *to, const void *from,
 }
 EXPORT_SYMBOL(__generic_copy_to_user);
 
-/*
- * Copy a null terminated string from userspace.
- */
-long strncpy_from_user(char *dst, const char __user *src, long count)
-{
-	long res;
-	char c;
-
-	if (count <= 0)
-		return count;
-
-	asm volatile ("\n"
-		"1:	"MOVES".b	(%2)+,%4\n"
-		"	move.b	%4,(%1)+\n"
-		"	jeq	2f\n"
-		"	subq.l	#1,%3\n"
-		"	jne	1b\n"
-		"2:	sub.l	%3,%0\n"
-		"3:\n"
-		"	.section .fixup,\"ax\"\n"
-		"	.even\n"
-		"10:	move.l	%5,%0\n"
-		"	jra	3b\n"
-		"	.previous\n"
-		"\n"
-		"	.section __ex_table,\"a\"\n"
-		"	.align	4\n"
-		"	.long	1b,10b\n"
-		"	.previous"
-		: "=d" (res), "+a" (dst), "+a" (src), "+r" (count), "=&d" (c)
-		: "i" (-EFAULT), "0" (count));
-
-	return res;
-}
-EXPORT_SYMBOL(strncpy_from_user);
-
-/*
- * Return the size of a string (including the ending 0)
- *
- * Return 0 on exception, a value greater than N if too long
- */
-long strnlen_user(const char __user *src, long n)
-{
-	char c;
-	long res;
-
-	asm volatile ("\n"
-		"1:	subq.l	#1,%1\n"
-		"	jmi	3f\n"
-		"2:	"MOVES".b	(%0)+,%2\n"
-		"	tst.b	%2\n"
-		"	jne	1b\n"
-		"	jra	4f\n"
-		"\n"
-		"3:	addq.l	#1,%0\n"
-		"4:	sub.l	%4,%0\n"
-		"5:\n"
-		"	.section .fixup,\"ax\"\n"
-		"	.even\n"
-		"20:	sub.l	%0,%0\n"
-		"	jra	5b\n"
-		"	.previous\n"
-		"\n"
-		"	.section __ex_table,\"a\"\n"
-		"	.align	4\n"
-		"	.long	2b,20b\n"
-		"	.previous\n"
-		: "=&a" (res), "+d" (n), "=&d" (c)
-		: "0" (src), "r" (src));
-
-	return res;
-}
-EXPORT_SYMBOL(strnlen_user);
-
 /*
  * Zero Userspace
  */

arch/m68k/platform/68328/timers.c

@@ -53,6 +53,7 @@
 #endif
 
 static u32 m68328_tick_cnt;
+static irq_handler_t timer_interrupt;
 
 /***************************************************************************/
 
@@ -62,7 +63,7 @@ static irqreturn_t hw_tick(int irq, void *dummy)
 	TSTAT &= 0;
 
 	m68328_tick_cnt += TICKS_PER_JIFFY;
-	return arch_timer_interrupt(irq, dummy);
+	return timer_interrupt(irq, dummy);
 }
 
 /***************************************************************************/
@@ -99,7 +100,7 @@ static struct clocksource m68328_clk = {
 
 /***************************************************************************/
 
-void hw_timer_init(void)
+void hw_timer_init(irq_handler_t handler)
 {
 	/* disable timer 1 */
 	TCTL = 0;
@@ -115,6 +116,7 @@ void hw_timer_init(void)
 	/* Enable timer 1 */
 	TCTL |= TCTL_TEN;
 	clocksource_register_hz(&m68328_clk, TICKS_PER_JIFFY*HZ);
+	timer_interrupt = handler;
 }
 
 /***************************************************************************/

arch/m68k/platform/68360/config.c

@@ -35,6 +35,7 @@ extern void m360_cpm_reset(void);
 #define OSCILLATOR  (unsigned long int)33000000
 #endif
 
+static irq_handler_t timer_interrupt;
 unsigned long int system_clock;
 
 extern QUICC *pquicc;
@@ -52,7 +53,7 @@ static irqreturn_t hw_tick(int irq, void *dummy)
 
   pquicc->timer_ter1 = 0x0002; /* clear timer event */
 
-  return arch_timer_interrupt(irq, dummy);
+  return timer_interrupt(irq, dummy);
 }
 
 static struct irqaction m68360_timer_irq = {
@@ -61,7 +62,7 @@ static struct irqaction m68360_timer_irq = {
 	.handler = hw_tick,
 };
 
-void hw_timer_init(void)
+void hw_timer_init(irq_handler_t handler)
 {
   unsigned char prescaler;
   unsigned short tgcr_save;
@@ -94,6 +95,8 @@ void hw_timer_init(void)
 
   pquicc->timer_ter1 = 0x0003; /* clear timer events */
 
+  timer_interrupt = handler;
+
   /* enable timer 1 interrupt in CIMR */
   setup_irq(CPMVEC_TIMER1, &m68360_timer_irq);
 

arch/powerpc/include/asm/hw_irq.h

@@ -100,6 +100,9 @@ static inline void hard_irq_disable(void)
 	get_paca()->irq_happened |= PACA_IRQ_HARD_DIS;
 }
 
+/* include/linux/interrupt.h needs hard_irq_disable to be a macro */
+#define hard_irq_disable	hard_irq_disable
+
 /*
  * This is called by asynchronous interrupts to conditionally
  * re-enable hard interrupts when soft-disabled after having

arch/sh/Kconfig

@@ -32,6 +32,8 @@ config SUPERH
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST
+	select GENERIC_STRNCPY_FROM_USER
+	select GENERIC_STRNLEN_USER
 	help
 	  The SuperH is a RISC processor targeted for use in embedded systems
 	  and consumer electronics; it was also used in the Sega Dreamcast

arch/sh/Makefile

@@ -9,6 +9,12 @@
 # License.  See the file "COPYING" in the main directory of this archive
 # for more details.
 #
+ifneq ($(SUBARCH),$(ARCH))
+  ifeq ($(CROSS_COMPILE),)
+    CROSS_COMPILE := $(call cc-cross-prefix, $(UTS_MACHINE)-linux-  $(UTS_MACHINE)-linux-gnu-  $(UTS_MACHINE)-unknown-linux-gnu-)
+  endif
+endif
+
 isa-y					:= any
 isa-$(CONFIG_SH_DSP)			:= sh
 isa-$(CONFIG_CPU_SH2)			:= sh2
@@ -106,19 +112,13 @@ LDFLAGS_vmlinux		+= --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \
 KBUILD_DEFCONFIG	:= cayman_defconfig
 endif
 
-ifneq ($(SUBARCH),$(ARCH))
-  ifeq ($(CROSS_COMPILE),)
-    CROSS_COMPILE := $(call cc-cross-prefix, $(UTS_MACHINE)-linux-  $(UTS_MACHINE)-linux-gnu-  $(UTS_MACHINE)-unknown-linux-gnu-)
-  endif
-endif
-
 ifdef CONFIG_CPU_LITTLE_ENDIAN
 ld-bfd			:= elf32-$(UTS_MACHINE)-linux
-LDFLAGS_vmlinux		+= --defsym 'jiffies=jiffies_64' --oformat $(ld-bfd)
+LDFLAGS_vmlinux		+= --defsym jiffies=jiffies_64 --oformat $(ld-bfd)
 LDFLAGS			+= -EL
 else
 ld-bfd			:= elf32-$(UTS_MACHINE)big-linux
-LDFLAGS_vmlinux		+= --defsym 'jiffies=jiffies_64+4' --oformat $(ld-bfd)
+LDFLAGS_vmlinux		+= --defsym jiffies=jiffies_64+4 --oformat $(ld-bfd)
 LDFLAGS			+= -EB
 endif
 

arch/sh/include/asm/Kbuild

@@ -1,5 +1,39 @@
 include include/asm-generic/Kbuild.asm
 
+generic-y += bitsperlong.h
+generic-y += cputime.h
+generic-y += current.h
+generic-y += delay.h
+generic-y += div64.h
+generic-y += emergency-restart.h
+generic-y += errno.h
+generic-y += fcntl.h
+generic-y += ioctl.h
+generic-y += ipcbuf.h
+generic-y += irq_regs.h
+generic-y += kvm_para.h
+generic-y += local.h
+generic-y += local64.h
+generic-y += param.h
+generic-y += parport.h
+generic-y += percpu.h
+generic-y += poll.h
+generic-y += mman.h
+generic-y += msgbuf.h
+generic-y += resource.h
+generic-y += scatterlist.h
+generic-y += sembuf.h
+generic-y += serial.h
+generic-y += shmbuf.h
+generic-y += siginfo.h
+generic-y += sizes.h
+generic-y += socket.h
+generic-y += statfs.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += ucontext.h
+generic-y += xor.h
+
 header-y += cachectl.h
 header-y += cpu-features.h
 header-y += hw_breakpoint.h

arch/sh/include/asm/bitsperlong.h

@@ -1 +0,0 @@
-#include <asm-generic/bitsperlong.h>

arch/sh/include/asm/cputime.h

@@ -1,6 +0,0 @@
-#ifndef __SH_CPUTIME_H
-#define __SH_CPUTIME_H
-
-#include <asm-generic/cputime.h>
-
-#endif /* __SH_CPUTIME_H */

arch/sh/include/asm/current.h

@@ -1 +0,0 @@
-#include <asm-generic/current.h>

arch/sh/include/asm/delay.h

@@ -1 +0,0 @@
-#include <asm-generic/delay.h>

arch/sh/include/asm/div64.h

@@ -1 +0,0 @@
-#include <asm-generic/div64.h>

arch/sh/include/asm/emergency-restart.h

@@ -1,6 +0,0 @@
-#ifndef _ASM_EMERGENCY_RESTART_H
-#define _ASM_EMERGENCY_RESTART_H
-
-#include <asm-generic/emergency-restart.h>
-
-#endif /* _ASM_EMERGENCY_RESTART_H */

arch/sh/include/asm/errno.h

@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_ERRNO_H
-#define __ASM_SH_ERRNO_H
-
-#include <asm-generic/errno.h>
-
-#endif /* __ASM_SH_ERRNO_H */

arch/sh/include/asm/fcntl.h

@@ -1 +0,0 @@
-#include <asm-generic/fcntl.h>

arch/sh/include/asm/ioctl.h

@@ -1 +0,0 @@
-#include <asm-generic/ioctl.h>

arch/sh/include/asm/ipcbuf.h

@@ -1 +0,0 @@
-#include <asm-generic/ipcbuf.h>

arch/sh/include/asm/irq_regs.h

@@ -1 +0,0 @@
-#include <asm-generic/irq_regs.h>

arch/sh/include/asm/kvm_para.h

@@ -1 +0,0 @@
-#include <asm-generic/kvm_para.h>

arch/sh/include/asm/local.h

@@ -1,7 +0,0 @@
-#ifndef __ASM_SH_LOCAL_H
-#define __ASM_SH_LOCAL_H
-
-#include <asm-generic/local.h>
-
-#endif /* __ASM_SH_LOCAL_H */
-

arch/sh/include/asm/local64.h

@@ -1 +0,0 @@
-#include <asm-generic/local64.h>

arch/sh/include/asm/mman.h

@@ -1 +0,0 @@
-#include <asm-generic/mman.h>

arch/sh/include/asm/msgbuf.h

@@ -1 +0,0 @@
-#include <asm-generic/msgbuf.h>

arch/sh/include/asm/param.h

@@ -1 +0,0 @@
-#include <asm-generic/param.h>

arch/sh/include/asm/parport.h

@@ -1 +0,0 @@
-#include <asm-generic/parport.h>

arch/sh/include/asm/percpu.h

@@ -1,6 +0,0 @@
-#ifndef __ARCH_SH_PERCPU
-#define __ARCH_SH_PERCPU
-
-#include <asm-generic/percpu.h>
-
-#endif /* __ARCH_SH_PERCPU */

arch/sh/include/asm/poll.h

@@ -1 +0,0 @@
-#include <asm-generic/poll.h>

arch/sh/include/asm/resource.h

@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_RESOURCE_H
-#define __ASM_SH_RESOURCE_H
-
-#include <asm-generic/resource.h>
-
-#endif /* __ASM_SH_RESOURCE_H */

arch/sh/include/asm/scatterlist.h

@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_SCATTERLIST_H
-#define __ASM_SH_SCATTERLIST_H
-
-#include <asm-generic/scatterlist.h>
-
-#endif /* __ASM_SH_SCATTERLIST_H */

arch/sh/include/asm/sembuf.h

@@ -1 +0,0 @@
-#include <asm-generic/sembuf.h>

arch/sh/include/asm/serial.h

@@ -1 +0,0 @@
-#include <asm-generic/serial.h>

arch/sh/include/asm/shmbuf.h

@@ -1 +0,0 @@
-#include <asm-generic/shmbuf.h>

arch/sh/include/asm/siginfo.h

@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_SIGINFO_H
-#define __ASM_SH_SIGINFO_H
-
-#include <asm-generic/siginfo.h>
-
-#endif /* __ASM_SH_SIGINFO_H */

arch/sh/include/asm/sizes.h

@@ -1 +0,0 @@
-#include <asm-generic/sizes.h>

arch/sh/include/asm/socket.h

@@ -1 +0,0 @@
-#include <asm-generic/socket.h>

arch/sh/include/asm/statfs.h

@@ -1,6 +0,0 @@
-#ifndef __ASM_SH_STATFS_H
-#define __ASM_SH_STATFS_H
-
-#include <asm-generic/statfs.h>
-
-#endif /* __ASM_SH_STATFS_H */

arch/sh/include/asm/termbits.h

@@ -1 +0,0 @@
-#include <asm-generic/termbits.h>

arch/sh/include/asm/termios.h

@@ -1 +0,0 @@
-#include <asm-generic/termios.h>

arch/sh/include/asm/uaccess.h

@@ -25,6 +25,8 @@
 	(__chk_user_ptr(addr),		\
 	 __access_ok((unsigned long __force)(addr), (size)))
 
+#define user_addr_max()	(current_thread_info()->addr_limit.seg)
+
 /*
  * Uh, these should become the main single-value transfer routines ...
  * They automatically use the right size if we just have the right
@@ -100,6 +102,11 @@ struct __large_struct { unsigned long buf[100]; };
 # include "uaccess_64.h"
 #endif
 
+extern long strncpy_from_user(char *dest, const char __user *src, long count);
+
+extern __must_check long strlen_user(const char __user *str);
+extern __must_check long strnlen_user(const char __user *str, long n);
+
 /* Generic arbitrary sized copy.  */
 /* Return the number of bytes NOT copied */
 __kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n);
@@ -137,37 +144,6 @@ __kernel_size_t __clear_user(void *addr, __kernel_size_t size);
 	__cl_size;							\
 })
 
-/**
- * strncpy_from_user: - Copy a NUL terminated string from userspace.
- * @dst:   Destination address, in kernel space.  This buffer must be at
- *         least @count bytes long.
- * @src:   Source address, in user space.
- * @count: Maximum number of bytes to copy, including the trailing NUL.
- *
- * Copies a NUL-terminated string from userspace to kernel space.
- *
- * On success, returns the length of the string (not including the trailing
- * NUL).
- *
- * If access to userspace fails, returns -EFAULT (some data may have been
- * copied).
- *
- * If @count is smaller than the length of the string, copies @count bytes
- * and returns @count.
- */
-#define strncpy_from_user(dest,src,count)				\
-({									\
-	unsigned long __sfu_src = (unsigned long)(src);			\
-	int __sfu_count = (int)(count);					\
-	long __sfu_res = -EFAULT;					\
-									\
-	if (__access_ok(__sfu_src, __sfu_count))			\
-		__sfu_res = __strncpy_from_user((unsigned long)(dest),	\
-				__sfu_src, __sfu_count);		\
-									\
-	__sfu_res;							\
-})
-
 static inline unsigned long
 copy_from_user(void *to, const void __user *from, unsigned long n)
 {
@@ -192,43 +168,6 @@ copy_to_user(void __user *to, const void *from, unsigned long n)
 	return __copy_size;
 }
 
-/**
- * strnlen_user: - Get the size of a string in user space.
- * @s: The string to measure.
- * @n: The maximum valid length
- *
- * Context: User context only.  This function may sleep.
- *
- * Get the size of a NUL-terminated string in user space.
- *
- * Returns the size of the string INCLUDING the terminating NUL.
- * On exception, returns 0.
- * If the string is too long, returns a value greater than @n.
- */
-static inline long strnlen_user(const char __user *s, long n)
-{
-	if (!__addr_ok(s))
-		return 0;
-	else
-		return __strnlen_user(s, n);
-}
-
-/**
- * strlen_user: - Get the size of a string in user space.
- * @str: The string to measure.
- *
- * Context: User context only.  This function may sleep.
- *
- * Get the size of a NUL-terminated string in user space.
- *
- * Returns the size of the string INCLUDING the terminating NUL.
- * On exception, returns 0.
- *
- * If there is a limit on the length of a valid string, you may wish to
- * consider using strnlen_user() instead.
- */
-#define strlen_user(str)	strnlen_user(str, ~0UL >> 1)
-
 /*
  * The exception table consists of pairs of addresses: the first is the
  * address of an instruction that is allowed to fault, and the second is

arch/sh/include/asm/uaccess_32.h

@@ -170,79 +170,4 @@ __asm__ __volatile__( \
 
 extern void __put_user_unknown(void);
 
-static inline int
-__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count)
-{
-	__kernel_size_t res;
-	unsigned long __dummy, _d, _s, _c;
-
-	__asm__ __volatile__(
-		"9:\n"
-		"mov.b	@%2+, %1\n\t"
-		"cmp/eq	#0, %1\n\t"
-		"bt/s	2f\n"
-		"1:\n"
-		"mov.b	%1, @%3\n\t"
-		"dt	%4\n\t"
-		"bf/s	9b\n\t"
-		" add	#1, %3\n\t"
-		"2:\n\t"
-		"sub	%4, %0\n"
-		"3:\n"
-		".section .fixup,\"ax\"\n"
-		"4:\n\t"
-		"mov.l	5f, %1\n\t"
-		"jmp	@%1\n\t"
-		" mov	%9, %0\n\t"
-		".balign 4\n"
-		"5:	.long 3b\n"
-		".previous\n"
-		".section __ex_table,\"a\"\n"
-		"	.balign 4\n"
-		"	.long 9b,4b\n"
-		".previous"
-		: "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d), "=r"(_c)
-		: "0" (__count), "2" (__src), "3" (__dest), "4" (__count),
-		  "i" (-EFAULT)
-		: "memory", "t");
-
-	return res;
-}
-
-/*
- * Return the size of a string (including the ending 0 even when we have
- * exceeded the maximum string length).
- */
-static inline long __strnlen_user(const char __user *__s, long __n)
-{
-	unsigned long res;
-	unsigned long __dummy;
-
-	__asm__ __volatile__(
-		"1:\t"
-		"mov.b	@(%0,%3), %1\n\t"
-		"cmp/eq	%4, %0\n\t"
-		"bt/s	2f\n\t"
-		" add	#1, %0\n\t"
-		"tst	%1, %1\n\t"
-		"bf	1b\n\t"
-		"2:\n"
-		".section .fixup,\"ax\"\n"
-		"3:\n\t"
-		"mov.l	4f, %1\n\t"
-		"jmp	@%1\n\t"
-		" mov	#0, %0\n"
-		".balign 4\n"
-		"4:	.long 2b\n"
-		".previous\n"
-		".section __ex_table,\"a\"\n"
-		"	.balign 4\n"
-		"	.long 1b,3b\n"
-		".previous"
-		: "=z" (res), "=&r" (__dummy)
-		: "0" (0), "r" (__s), "r" (__n)
-		: "t");
-	return res;
-}
-
 #endif /* __ASM_SH_UACCESS_32_H */

arch/sh/include/asm/uaccess_64.h

@@ -84,8 +84,4 @@ extern long __put_user_asm_l(void *, long);
 extern long __put_user_asm_q(void *, long);
 extern void __put_user_unknown(void);
 
-extern long __strnlen_user(const char *__s, long __n);
-extern int __strncpy_from_user(unsigned long __dest,
-	       unsigned long __user __src, int __count);
-
 #endif /* __ASM_SH_UACCESS_64_H */

arch/sh/include/asm/ucontext.h

@@ -1 +0,0 @@
-#include <asm-generic/ucontext.h>

arch/sh/include/asm/word-at-a-time.h

@@ -0,0 +1,53 @@
+#ifndef __ASM_SH_WORD_AT_A_TIME_H
+#define __ASM_SH_WORD_AT_A_TIME_H
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+# include <asm-generic/word-at-a-time.h>
+#else
+/*
+ * Little-endian version cribbed from x86.
+ */
+struct word_at_a_time {
+	const unsigned long one_bits, high_bits;
+};
+
+#define WORD_AT_A_TIME_CONSTANTS { REPEAT_BYTE(0x01), REPEAT_BYTE(0x80) }
+
+/* Carl Chatfield / Jan Achrenius G+ version for 32-bit */
+static inline long count_masked_bytes(long mask)
+{
+	/* (000000 0000ff 00ffff ffffff) -> ( 1 1 2 3 ) */
+	long a = (0x0ff0001+mask) >> 23;
+	/* Fix the 1 for 00 case */
+	return a & mask;
+}
+
+/* Return nonzero if it has a zero */
+static inline unsigned long has_zero(unsigned long a, unsigned long *bits, const struct word_at_a_time *c)
+{
+	unsigned long mask = ((a - c->one_bits) & ~a) & c->high_bits;
+	*bits = mask;
+	return mask;
+}
+
+static inline unsigned long prep_zero_mask(unsigned long a, unsigned long bits, const struct word_at_a_time *c)
+{
+	return bits;
+}
+
+static inline unsigned long create_zero_mask(unsigned long bits)
+{
+	bits = (bits - 1) & ~bits;
+	return bits >> 7;
+}
+
+/* The mask we created is directly usable as a bytemask */
+#define zero_bytemask(mask) (mask)
+
+static inline unsigned long find_zero(unsigned long mask)
+{
+	return count_masked_bytes(mask);
+}
+#endif
+
+#endif

arch/sh/include/asm/xor.h

@@ -1 +0,0 @@
-#include <asm-generic/xor.h>

arch/sh/include/cpu-sh2a/cpu/ubc.h

@@ -1,28 +0,0 @@
-/*
- * SH-2A UBC definitions
- *
- * Copyright (C) 2008 Kieran Bingham
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#ifndef __ASM_CPU_SH2A_UBC_H
-#define __ASM_CPU_SH2A_UBC_H
-
-#define UBC_BARA                0xfffc0400
-#define UBC_BAMRA               0xfffc0404
-#define UBC_BBRA                0xfffc04a0	/* 16 bit access */
-#define UBC_BDRA                0xfffc0408
-#define UBC_BDMRA               0xfffc040c
-
-#define UBC_BARB                0xfffc0410
-#define UBC_BAMRB               0xfffc0414
-#define UBC_BBRB                0xfffc04b0	/* 16 bit access */
-#define UBC_BDRB                0xfffc0418
-#define UBC_BDMRB               0xfffc041c
-
-#define UBC_BRCR                0xfffc04c0
-
-#endif /* __ASM_CPU_SH2A_UBC_H */

arch/sh/kernel/cpu/sh5/entry.S

@@ -1568,86 +1568,6 @@ ___clear_user_exit:
 
 #endif /* CONFIG_MMU */
 
-/*
- * int __strncpy_from_user(unsigned long __dest, unsigned long __src,
- *			   int __count)
- *
- * Inputs:
- * (r2)  target address
- * (r3)  source address
- * (r4)  maximum size in bytes
- *
- * Ouputs:
- * (*r2) copied data
- * (r2)  -EFAULT (in case of faulting)
- *       copied data (otherwise)
- */
-	.global	__strncpy_from_user
-__strncpy_from_user:
-	pta	___strncpy_from_user1, tr0
-	pta	___strncpy_from_user_done, tr1
-	or	r4, ZERO, r5		/* r5 = original count */
-	beq/u	r4, r63, tr1		/* early exit if r4==0 */
-	movi	-(EFAULT), r6		/* r6 = reply, no real fixup */
-	or	ZERO, ZERO, r7		/* r7 = data, clear top byte of data */
-
-___strncpy_from_user1:
-	ld.b	r3, 0, r7		/* Fault address: only in reading */
-	st.b	r2, 0, r7
-	addi	r2, 1, r2
-	addi	r3, 1, r3
-	beq/u	ZERO, r7, tr1
-	addi	r4, -1, r4		/* return real number of copied bytes */
-	bne/l	ZERO, r4, tr0
-
-___strncpy_from_user_done:
-	sub	r5, r4, r6		/* If done, return copied */
-
-___strncpy_from_user_exit:
-	or	r6, ZERO, r2
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
-/*
- * extern long __strnlen_user(const char *__s, long __n)
- *
- * Inputs:
- * (r2)  source address
- * (r3)  source size in bytes
- *
- * Ouputs:
- * (r2)  -EFAULT (in case of faulting)
- *       string length (otherwise)
- */
-	.global	__strnlen_user
-__strnlen_user:
-	pta	___strnlen_user_set_reply, tr0
-	pta	___strnlen_user1, tr1
-	or	ZERO, ZERO, r5		/* r5 = counter */
-	movi	-(EFAULT), r6		/* r6 = reply, no real fixup */
-	or	ZERO, ZERO, r7		/* r7 = data, clear top byte of data */
-	beq	r3, ZERO, tr0
-
-___strnlen_user1:
-	ldx.b	r2, r5, r7		/* Fault address: only in reading */
-	addi	r3, -1, r3		/* No real fixup */
-	addi	r5, 1, r5
-	beq	r3, ZERO, tr0
-	bne	r7, ZERO, tr1
-! The line below used to be active.  This meant led to a junk byte lying between each pair
-! of entries in the argv & envp structures in memory.  Whilst the program saw the right data
-! via the argv and envp arguments to main, it meant the 'flat' representation visible through
-! /proc/$pid/cmdline was corrupt, causing trouble with ps, for example.
-!	addi	r5, 1, r5		/* Include '\0' */
-
-___strnlen_user_set_reply:
-	or	r5, ZERO, r6		/* If done, return counter */
-
-___strnlen_user_exit:
-	or	r6, ZERO, r2
-	ptabs	LINK, tr0
-	blink	tr0, ZERO
-
 /*
  * extern long __get_user_asm_?(void *val, long addr)
  *
@@ -1982,8 +1902,6 @@ asm_uaccess_start:
 	.long	___copy_user2, ___copy_user_exit
 	.long	___clear_user1, ___clear_user_exit
 #endif
-	.long	___strncpy_from_user1, ___strncpy_from_user_exit
-	.long	___strnlen_user1, ___strnlen_user_exit
 	.long	___get_user_asm_b1, ___get_user_asm_b_exit
 	.long	___get_user_asm_w1, ___get_user_asm_w_exit
 	.long	___get_user_asm_l1, ___get_user_asm_l_exit

arch/sh/kernel/process.c

@@ -4,6 +4,7 @@
 #include <linux/sched.h>
 #include <linux/export.h>
 #include <linux/stackprotector.h>
+#include <asm/fpu.h>
 
 struct kmem_cache *task_xstate_cachep = NULL;
 unsigned int xstate_size;

arch/sh/kernel/process_64.c

@@ -33,6 +33,7 @@
 #include <asm/switch_to.h>
 
 struct task_struct *last_task_used_math = NULL;
+struct pt_regs fake_swapper_regs = { 0, };
 
 void show_regs(struct pt_regs *regs)
 {

arch/sh/kernel/sh_ksyms_64.c

@@ -32,8 +32,6 @@ EXPORT_SYMBOL(__get_user_asm_b);
 EXPORT_SYMBOL(__get_user_asm_w);
 EXPORT_SYMBOL(__get_user_asm_l);
 EXPORT_SYMBOL(__get_user_asm_q);
-EXPORT_SYMBOL(__strnlen_user);
-EXPORT_SYMBOL(__strncpy_from_user);
 EXPORT_SYMBOL(__clear_user);
 EXPORT_SYMBOL(copy_page);
 EXPORT_SYMBOL(__copy_user);

arch/sparc/include/asm/cmt.h

@@ -1,59 +0,0 @@
-#ifndef _SPARC64_CMT_H
-#define _SPARC64_CMT_H
-
-/* cmt.h: Chip Multi-Threading register definitions
- *
- * Copyright (C) 2004 David S. Miller (davem@redhat.com)
- */
-
-/* ASI_CORE_ID - private */
-#define LP_ID		0x0000000000000010UL
-#define  LP_ID_MAX	0x00000000003f0000UL
-#define  LP_ID_ID	0x000000000000003fUL
-
-/* ASI_INTR_ID - private */
-#define LP_INTR_ID	0x0000000000000000UL
-#define  LP_INTR_ID_ID	0x00000000000003ffUL
-
-/* ASI_CESR_ID - private */
-#define CESR_ID		0x0000000000000040UL
-#define  CESR_ID_ID	0x00000000000000ffUL
-
-/* ASI_CORE_AVAILABLE - shared */
-#define LP_AVAIL	0x0000000000000000UL
-#define  LP_AVAIL_1	0x0000000000000002UL
-#define  LP_AVAIL_0	0x0000000000000001UL
-
-/* ASI_CORE_ENABLE_STATUS - shared */
-#define LP_ENAB_STAT	0x0000000000000010UL
-#define  LP_ENAB_STAT_1	0x0000000000000002UL
-#define  LP_ENAB_STAT_0	0x0000000000000001UL
-
-/* ASI_CORE_ENABLE - shared */
-#define LP_ENAB		0x0000000000000020UL
-#define  LP_ENAB_1	0x0000000000000002UL
-#define  LP_ENAB_0	0x0000000000000001UL
-
-/* ASI_CORE_RUNNING - shared */
-#define LP_RUNNING_RW	0x0000000000000050UL
-#define LP_RUNNING_W1S	0x0000000000000060UL
-#define LP_RUNNING_W1C	0x0000000000000068UL
-#define  LP_RUNNING_1	0x0000000000000002UL
-#define  LP_RUNNING_0	0x0000000000000001UL
-
-/* ASI_CORE_RUNNING_STAT - shared */
-#define LP_RUN_STAT	0x0000000000000058UL
-#define  LP_RUN_STAT_1	0x0000000000000002UL
-#define  LP_RUN_STAT_0	0x0000000000000001UL
-
-/* ASI_XIR_STEERING - shared */
-#define LP_XIR_STEER	0x0000000000000030UL
-#define  LP_XIR_STEER_1	0x0000000000000002UL
-#define  LP_XIR_STEER_0	0x0000000000000001UL
-
-/* ASI_CMT_ERROR_STEERING - shared */
-#define CMT_ER_STEER	0x0000000000000040UL
-#define  CMT_ER_STEER_1	0x0000000000000002UL
-#define  CMT_ER_STEER_0	0x0000000000000001UL
-
-#endif /* _SPARC64_CMT_H */

arch/sparc/include/asm/mpmbox.h

@@ -1,67 +0,0 @@
-/*
- * mpmbox.h:  Interface and defines for the OpenProm mailbox
- *               facilities for MP machines under Linux.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#ifndef _SPARC_MPMBOX_H
-#define _SPARC_MPMBOX_H
-
-/* The prom allocates, for each CPU on the machine an unsigned
- * byte in physical ram.  You probe the device tree prom nodes
- * for these values.  The purpose of this byte is to be able to
- * pass messages from one cpu to another.
- */
-
-/* These are the main message types we have to look for in our
- * Cpu mailboxes, based upon these values we decide what course
- * of action to take.
- */
-
-/* The CPU is executing code in the kernel. */
-#define MAILBOX_ISRUNNING     0xf0
-
-/* Another CPU called romvec->pv_exit(), you should call
- * prom_stopcpu() when you see this in your mailbox.
- */
-#define MAILBOX_EXIT          0xfb
-
-/* Another CPU called romvec->pv_enter(), you should call
- * prom_cpuidle() when this is seen.
- */
-#define MAILBOX_GOSPIN        0xfc
-
-/* Another CPU has hit a breakpoint either into kadb or the prom
- * itself.  Just like MAILBOX_GOSPIN, you should call prom_cpuidle()
- * at this point.
- */
-#define MAILBOX_BPT_SPIN      0xfd
-
-/* Oh geese, some other nitwit got a damn watchdog reset.  The party's
- * over so go call prom_stopcpu().
- */
-#define MAILBOX_WDOG_STOP     0xfe
-
-#ifndef __ASSEMBLY__
-
-/* Handy macro's to determine a cpu's state. */
-
-/* Is the cpu still in Power On Self Test? */
-#define MBOX_POST_P(letter)  ((letter) >= 0x00 && (letter) <= 0x7f)
-
-/* Is the cpu at the 'ok' prompt of the PROM? */
-#define MBOX_PROMPROMPT_P(letter) ((letter) >= 0x80 && (letter) <= 0x8f)
-
-/* Is the cpu spinning in the PROM? */
-#define MBOX_PROMSPIN_P(letter) ((letter) >= 0x90 && (letter) <= 0xef)
-
-/* Sanity check... This is junk mail, throw it out. */
-#define MBOX_BOGON_P(letter) ((letter) >= 0xf1 && (letter) <= 0xfa)
-
-/* Is the cpu actively running an application/kernel-code? */
-#define MBOX_RUNNING_P(letter) ((letter) == MAILBOX_ISRUNNING)
-
-#endif /* !(__ASSEMBLY__) */
-
-#endif /* !(_SPARC_MPMBOX_H) */

arch/tile/include/asm/uaccess.h

@@ -146,7 +146,7 @@ extern int fixup_exception(struct pt_regs *regs);
 #ifdef __tilegx__
 #define __get_user_1(x, ptr, ret) __get_user_asm(ld1u, x, ptr, ret)
 #define __get_user_2(x, ptr, ret) __get_user_asm(ld2u, x, ptr, ret)
-#define __get_user_4(x, ptr, ret) __get_user_asm(ld4u, x, ptr, ret)
+#define __get_user_4(x, ptr, ret) __get_user_asm(ld4s, x, ptr, ret)
 #define __get_user_8(x, ptr, ret) __get_user_asm(ld, x, ptr, ret)
 #else
 #define __get_user_1(x, ptr, ret) __get_user_asm(lb_u, x, ptr, ret)

arch/x86/crypto/aesni-intel_asm.S

@@ -2460,10 +2460,12 @@ ENTRY(aesni_cbc_dec)
 	pxor IN3, STATE4
 	movaps IN4, IV
 #else
-	pxor (INP), STATE2
-	pxor 0x10(INP), STATE3
 	pxor IN1, STATE4
 	movaps IN2, IV
+	movups (INP), IN1
+	pxor IN1, STATE2
+	movups 0x10(INP), IN2
+	pxor IN2, STATE3
 #endif
 	movups STATE1, (OUTP)
 	movups STATE2, 0x10(OUTP)

arch/x86/kernel/kvmclock.c

@@ -120,11 +120,6 @@ bool kvm_check_and_clear_guest_paused(void)
 	bool ret = false;
 	struct pvclock_vcpu_time_info *src;
 
-	/*
-	 * per_cpu() is safe here because this function is only called from
-	 * timer functions where preemption is already disabled.
-	 */
-	WARN_ON(!in_atomic());
 	src = &__get_cpu_var(hv_clock);
 	if ((src->flags & PVCLOCK_GUEST_STOPPED) != 0) {
 		__this_cpu_and(hv_clock.flags, ~PVCLOCK_GUEST_STOPPED);

arch/x86/kernel/pci-dma.c

@@ -100,7 +100,7 @@ void *dma_generic_alloc_coherent(struct device *dev, size_t size,
 				 struct dma_attrs *attrs)
 {
 	unsigned long dma_mask;
-	struct page *page = NULL;
+	struct page *page;
 	unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT;
 	dma_addr_t addr;
 
@@ -108,6 +108,7 @@ void *dma_generic_alloc_coherent(struct device *dev, size_t size,
 
 	flag |= __GFP_ZERO;
 again:
+	page = NULL;
 	if (!(flag & GFP_ATOMIC))
 		page = dma_alloc_from_contiguous(dev, count, get_order(size));
 	if (!page)

arch/x86/kernel/smpboot.c

@@ -349,9 +349,12 @@ static bool __cpuinit match_llc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
 
 static bool __cpuinit match_mc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o)
 {
-	if (c->phys_proc_id == o->phys_proc_id)
-		return topology_sane(c, o, "mc");
+	if (c->phys_proc_id == o->phys_proc_id) {
+		if (cpu_has(c, X86_FEATURE_AMD_DCM))
+			return true;
 
+		return topology_sane(c, o, "mc");
+	}
 	return false;
 }
 

arch/x86/lib/usercopy.c

@@ -22,7 +22,7 @@ copy_from_user_nmi(void *to, const void __user *from, unsigned long n)
 	void *map;
 	int ret;
 
-	if (__range_not_ok(from, n, TASK_SIZE) == 0)
+	if (__range_not_ok(from, n, TASK_SIZE))
 		return len;
 
 	do {

arch/x86/mm/ioremap.c

@@ -180,7 +180,7 @@ err_free_memtype:
 
 /**
  * ioremap_nocache     -   map bus memory into CPU space
- * @offset:    bus address of the memory
+ * @phys_addr:    bus address of the memory
  * @size:      size of the resource to map
  *
  * ioremap_nocache performs a platform specific sequence of operations to
@@ -217,7 +217,7 @@ EXPORT_SYMBOL(ioremap_nocache);
 
 /**
  * ioremap_wc	-	map memory into CPU space write combined
- * @offset:	bus address of the memory
+ * @phys_addr:	bus address of the memory
  * @size:	size of the resource to map
  *
  * This version of ioremap ensures that the memory is marked write combining.

arch/x86/mm/pageattr.c

@@ -122,7 +122,7 @@ within(unsigned long addr, unsigned long start, unsigned long end)
 
 /**
  * clflush_cache_range - flush a cache range with clflush
- * @addr:	virtual start address
+ * @vaddr:	virtual start address
  * @size:	number of bytes to flush
  *
  * clflush is an unordered instruction which needs fencing with mfence

arch/x86/um/sys_call_table_32.c

@@ -39,9 +39,9 @@
 #undef __SYSCALL_I386
 #define __SYSCALL_I386(nr, sym, compat) [ nr ] = sym,
 
-typedef void (*sys_call_ptr_t)(void);
+typedef asmlinkage void (*sys_call_ptr_t)(void);
 
-extern void sys_ni_syscall(void);
+extern asmlinkage void sys_ni_syscall(void);
 
 const sys_call_ptr_t sys_call_table[] __cacheline_aligned = {
 	/*

arch/x86/xen/enlighten.c

@@ -209,6 +209,9 @@ static void __init xen_banner(void)
 	       xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : "");
 }
 
+#define CPUID_THERM_POWER_LEAF 6
+#define APERFMPERF_PRESENT 0
+
 static __read_mostly unsigned int cpuid_leaf1_edx_mask = ~0;
 static __read_mostly unsigned int cpuid_leaf1_ecx_mask = ~0;
 
@@ -242,6 +245,11 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx,
 		*dx = cpuid_leaf5_edx_val;
 		return;
 
+	case CPUID_THERM_POWER_LEAF:
+		/* Disabling APERFMPERF for kernel usage */
+		maskecx = ~(1 << APERFMPERF_PRESENT);
+		break;
+
 	case 0xb:
 		/* Suppress extended topology stuff */
 		maskebx = 0;

arch/x86/xen/p2m.c

@@ -706,6 +706,7 @@ int m2p_add_override(unsigned long mfn, struct page *page,
 	unsigned long uninitialized_var(address);
 	unsigned level;
 	pte_t *ptep = NULL;
+	int ret = 0;
 
 	pfn = page_to_pfn(page);
 	if (!PageHighMem(page)) {
@@ -741,6 +742,24 @@ int m2p_add_override(unsigned long mfn, struct page *page,
 	list_add(&page->lru,  &m2p_overrides[mfn_hash(mfn)]);
 	spin_unlock_irqrestore(&m2p_override_lock, flags);
 
+	/* p2m(m2p(mfn)) == mfn: the mfn is already present somewhere in
+	 * this domain. Set the FOREIGN_FRAME_BIT in the p2m for the other
+	 * pfn so that the following mfn_to_pfn(mfn) calls will return the
+	 * pfn from the m2p_override (the backend pfn) instead.
+	 * We need to do this because the pages shared by the frontend
+	 * (xen-blkfront) can be already locked (lock_page, called by
+	 * do_read_cache_page); when the userspace backend tries to use them
+	 * with direct_IO, mfn_to_pfn returns the pfn of the frontend, so
+	 * do_blockdev_direct_IO is going to try to lock the same pages
+	 * again resulting in a deadlock.
+	 * As a side effect get_user_pages_fast might not be safe on the
+	 * frontend pages while they are being shared with the backend,
+	 * because mfn_to_pfn (that ends up being called by GUPF) will
+	 * return the backend pfn rather than the frontend pfn. */
+	ret = __get_user(pfn, &machine_to_phys_mapping[mfn]);
+	if (ret == 0 && get_phys_to_machine(pfn) == mfn)
+		set_phys_to_machine(pfn, FOREIGN_FRAME(mfn));
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(m2p_add_override);
@@ -752,6 +771,7 @@ int m2p_remove_override(struct page *page, bool clear_pte)
 	unsigned long uninitialized_var(address);
 	unsigned level;
 	pte_t *ptep = NULL;
+	int ret = 0;
 
 	pfn = page_to_pfn(page);
 	mfn = get_phys_to_machine(pfn);
@@ -821,6 +841,22 @@ int m2p_remove_override(struct page *page, bool clear_pte)
 	} else
 		set_phys_to_machine(pfn, page->index);
 
+	/* p2m(m2p(mfn)) == FOREIGN_FRAME(mfn): the mfn is already present
+	 * somewhere in this domain, even before being added to the
+	 * m2p_override (see comment above in m2p_add_override).
+	 * If there are no other entries in the m2p_override corresponding
+	 * to this mfn, then remove the FOREIGN_FRAME_BIT from the p2m for
+	 * the original pfn (the one shared by the frontend): the backend
+	 * cannot do any IO on this page anymore because it has been
+	 * unshared. Removing the FOREIGN_FRAME_BIT from the p2m entry of
+	 * the original pfn causes mfn_to_pfn(mfn) to return the frontend
+	 * pfn again. */
+	mfn &= ~FOREIGN_FRAME_BIT;
+	ret = __get_user(pfn, &machine_to_phys_mapping[mfn]);
+	if (ret == 0 && get_phys_to_machine(pfn) == FOREIGN_FRAME(mfn) &&
+			m2p_find_override(mfn) == NULL)
+		set_phys_to_machine(pfn, mfn);
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(m2p_remove_override);

arch/x86/xen/setup.c

@@ -371,7 +371,8 @@ char * __init xen_memory_setup(void)
 	populated = xen_populate_chunk(map, memmap.nr_entries,
 			max_pfn, &last_pfn, xen_released_pages);
 
-	extra_pages += (xen_released_pages - populated);
+	xen_released_pages -= populated;
+	extra_pages += xen_released_pages;
 
 	if (last_pfn > max_pfn) {
 		max_pfn = min(MAX_DOMAIN_PAGES, last_pfn);

drivers/base/regmap/regmap.c

@@ -246,11 +246,11 @@ struct regmap *regmap_init(struct device *dev,
 		map->lock = regmap_lock_mutex;
 		map->unlock = regmap_unlock_mutex;
 	}
-	map->format.buf_size = (config->reg_bits + config->val_bits) / 8;
 	map->format.reg_bytes = DIV_ROUND_UP(config->reg_bits, 8);
 	map->format.pad_bytes = config->pad_bits / 8;
 	map->format.val_bytes = DIV_ROUND_UP(config->val_bits, 8);
-	map->format.buf_size += map->format.pad_bytes;
+	map->format.buf_size = DIV_ROUND_UP(config->reg_bits +
+			config->val_bits + config->pad_bits, 8);
 	map->reg_shift = config->pad_bits % 8;
 	if (config->reg_stride)
 		map->reg_stride = config->reg_stride;
@@ -368,7 +368,7 @@ struct regmap *regmap_init(struct device *dev,
 
 	ret = regcache_init(map, config);
 	if (ret < 0)
-		goto err_free_workbuf;
+		goto err_debugfs;
 
 	/* Add a devres resource for dev_get_regmap() */
 	m = devres_alloc(dev_get_regmap_release, sizeof(*m), GFP_KERNEL);
@@ -383,7 +383,8 @@ struct regmap *regmap_init(struct device *dev,
 
 err_cache:
 	regcache_exit(map);
-err_free_workbuf:
+err_debugfs:
+	regmap_debugfs_exit(map);
 	kfree(map->work_buf);
 err_map:
 	kfree(map);
@@ -471,6 +472,7 @@ int regmap_reinit_cache(struct regmap *map, const struct regmap_config *config)
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(regmap_reinit_cache);
 
 /**
  * regmap_exit(): Free a previously allocated register map

drivers/bcma/driver_chipcommon_pmu.c

@@ -139,7 +139,9 @@ void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
 		bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7);
 		break;
 	case 0x4331:
-		/* BCM4331 workaround is SPROM-related, we put it in sprom.c */
+	case 43431:
+		/* Ext PA lines must be enabled for tx on BCM4331 */
+		bcma_chipco_bcm4331_ext_pa_lines_ctl(cc, true);
 		break;
 	case 43224:
 		if (bus->chipinfo.rev == 0) {

drivers/bcma/driver_pci.c

@@ -232,17 +232,19 @@ void __devinit bcma_core_pci_init(struct bcma_drv_pci *pc)
 int bcma_core_pci_irq_ctl(struct bcma_drv_pci *pc, struct bcma_device *core,
 			  bool enable)
 {
-	struct pci_dev *pdev = pc->core->bus->host_pci;
+	struct pci_dev *pdev;
 	u32 coremask, tmp;
 	int err = 0;
 
-	if (core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
+	if (!pc || core->bus->hosttype != BCMA_HOSTTYPE_PCI) {
 		/* This bcma device is not on a PCI host-bus. So the IRQs are
 		 * not routed through the PCI core.
 		 * So we must not enable routing through the PCI core. */
 		goto out;
 	}
 
+	pdev = pc->core->bus->host_pci;
+
 	err = pci_read_config_dword(pdev, BCMA_PCI_IRQMASK, &tmp);
 	if (err)
 		goto out;

drivers/bcma/sprom.c

@@ -579,13 +579,13 @@ int bcma_sprom_get(struct bcma_bus *bus)
 	if (!sprom)
 		return -ENOMEM;
 
-	if (bus->chipinfo.id == 0x4331)
+	if (bus->chipinfo.id == 0x4331 || bus->chipinfo.id == 43431)
 		bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, false);
 
 	pr_debug("SPROM offset 0x%x\n", offset);
 	bcma_sprom_read(bus, offset, sprom);
 
-	if (bus->chipinfo.id == 0x4331)
+	if (bus->chipinfo.id == 0x4331 || bus->chipinfo.id == 43431)
 		bcma_chipco_bcm4331_ext_pa_lines_ctl(&bus->drv_cc, true);
 
 	err = bcma_sprom_valid(sprom);

drivers/char/hw_random/atmel-rng.c

@@ -36,6 +36,13 @@ static int atmel_trng_read(struct hwrng *rng, void *buf, size_t max,
 	/* data ready? */
 	if (readl(trng->base + TRNG_ODATA) & 1) {
 		*data = readl(trng->base + TRNG_ODATA);
+		/*
+		  ensure data ready is only set again AFTER the next data
+		  word is ready in case it got set between checking ISR
+		  and reading ODATA, so we don't risk re-reading the
+		  same word
+		*/
+		readl(trng->base + TRNG_ISR);
 		return 4;
 	} else
 		return 0;

drivers/clocksource/sh_cmt.c

@@ -48,13 +48,13 @@ struct sh_cmt_priv {
 	unsigned long next_match_value;
 	unsigned long max_match_value;
 	unsigned long rate;
-	spinlock_t lock;
+	raw_spinlock_t lock;
 	struct clock_event_device ced;
 	struct clocksource cs;
 	unsigned long total_cycles;
 };
 
-static DEFINE_SPINLOCK(sh_cmt_lock);
+static DEFINE_RAW_SPINLOCK(sh_cmt_lock);
 
 #define CMSTR -1 /* shared register */
 #define CMCSR 0 /* channel register */
@@ -139,7 +139,7 @@ static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start)
 	unsigned long flags, value;
 
 	/* start stop register shared by multiple timer channels */
-	spin_lock_irqsave(&sh_cmt_lock, flags);
+	raw_spin_lock_irqsave(&sh_cmt_lock, flags);
 	value = sh_cmt_read(p, CMSTR);
 
 	if (start)
@@ -148,7 +148,7 @@ static void sh_cmt_start_stop_ch(struct sh_cmt_priv *p, int start)
 		value &= ~(1 << cfg->timer_bit);
 
 	sh_cmt_write(p, CMSTR, value);
-	spin_unlock_irqrestore(&sh_cmt_lock, flags);
+	raw_spin_unlock_irqrestore(&sh_cmt_lock, flags);
 }
 
 static int sh_cmt_enable(struct sh_cmt_priv *p, unsigned long *rate)
@@ -328,9 +328,9 @@ static void sh_cmt_set_next(struct sh_cmt_priv *p, unsigned long delta)
 {
 	unsigned long flags;
 
-	spin_lock_irqsave(&p->lock, flags);
+	raw_spin_lock_irqsave(&p->lock, flags);
 	__sh_cmt_set_next(p, delta);
-	spin_unlock_irqrestore(&p->lock, flags);
+	raw_spin_unlock_irqrestore(&p->lock, flags);
 }
 
 static irqreturn_t sh_cmt_interrupt(int irq, void *dev_id)
@@ -385,7 +385,7 @@ static int sh_cmt_start(struct sh_cmt_priv *p, unsigned long flag)
 	int ret = 0;
 	unsigned long flags;
 
-	spin_lock_irqsave(&p->lock, flags);
+	raw_spin_lock_irqsave(&p->lock, flags);
 
 	if (!(p->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE)))
 		ret = sh_cmt_enable(p, &p->rate);
@@ -398,7 +398,7 @@ static int sh_cmt_start(struct sh_cmt_priv *p, unsigned long flag)
 	if ((flag == FLAG_CLOCKSOURCE) && (!(p->flags & FLAG_CLOCKEVENT)))
 		__sh_cmt_set_next(p, p->max_match_value);
  out:
-	spin_unlock_irqrestore(&p->lock, flags);
+	raw_spin_unlock_irqrestore(&p->lock, flags);
 
 	return ret;
 }
@@ -408,7 +408,7 @@ static void sh_cmt_stop(struct sh_cmt_priv *p, unsigned long flag)
 	unsigned long flags;
 	unsigned long f;
 
-	spin_lock_irqsave(&p->lock, flags);
+	raw_spin_lock_irqsave(&p->lock, flags);
 
 	f = p->flags & (FLAG_CLOCKEVENT | FLAG_CLOCKSOURCE);
 	p->flags &= ~flag;
@@ -420,7 +420,7 @@ static void sh_cmt_stop(struct sh_cmt_priv *p, unsigned long flag)
 	if ((flag == FLAG_CLOCKEVENT) && (p->flags & FLAG_CLOCKSOURCE))
 		__sh_cmt_set_next(p, p->max_match_value);
 
-	spin_unlock_irqrestore(&p->lock, flags);
+	raw_spin_unlock_irqrestore(&p->lock, flags);
 }
 
 static struct sh_cmt_priv *cs_to_sh_cmt(struct clocksource *cs)
@@ -435,13 +435,13 @@ static cycle_t sh_cmt_clocksource_read(struct clocksource *cs)
 	unsigned long value;
 	int has_wrapped;
 
-	spin_lock_irqsave(&p->lock, flags);
+	raw_spin_lock_irqsave(&p->lock, flags);
 	value = p->total_cycles;
 	raw = sh_cmt_get_counter(p, &has_wrapped);
 
 	if (unlikely(has_wrapped))
 		raw += p->match_value + 1;
-	spin_unlock_irqrestore(&p->lock, flags);
+	raw_spin_unlock_irqrestore(&p->lock, flags);
 
 	return value + raw;
 }
@@ -591,7 +591,7 @@ static int sh_cmt_register(struct sh_cmt_priv *p, char *name,
 		p->max_match_value = (1 << p->width) - 1;
 
 	p->match_value = p->max_match_value;
-	spin_lock_init(&p->lock);
+	raw_spin_lock_init(&p->lock);
 
 	if (clockevent_rating)
 		sh_cmt_register_clockevent(p, name, clockevent_rating);

drivers/clocksource/sh_mtu2.c

@@ -43,7 +43,7 @@ struct sh_mtu2_priv {
 	struct clock_event_device ced;
 };
 
-static DEFINE_SPINLOCK(sh_mtu2_lock);
+static DEFINE_RAW_SPINLOCK(sh_mtu2_lock);
 
 #define TSTR -1 /* shared register */
 #define TCR  0 /* channel register */
@@ -107,7 +107,7 @@ static void sh_mtu2_start_stop_ch(struct sh_mtu2_priv *p, int start)
 	unsigned long flags, value;
 
 	/* start stop register shared by multiple timer channels */
-	spin_lock_irqsave(&sh_mtu2_lock, flags);
+	raw_spin_lock_irqsave(&sh_mtu2_lock, flags);
 	value = sh_mtu2_read(p, TSTR);
 
 	if (start)
@@ -116,7 +116,7 @@ static void sh_mtu2_start_stop_ch(struct sh_mtu2_priv *p, int start)
 		value &= ~(1 << cfg->timer_bit);
 
 	sh_mtu2_write(p, TSTR, value);
-	spin_unlock_irqrestore(&sh_mtu2_lock, flags);
+	raw_spin_unlock_irqrestore(&sh_mtu2_lock, flags);
 }
 
 static int sh_mtu2_enable(struct sh_mtu2_priv *p)

drivers/clocksource/sh_tmu.c

@@ -45,7 +45,7 @@ struct sh_tmu_priv {
 	struct clocksource cs;
 };
 
-static DEFINE_SPINLOCK(sh_tmu_lock);
+static DEFINE_RAW_SPINLOCK(sh_tmu_lock);
 
 #define TSTR -1 /* shared register */
 #define TCOR  0 /* channel register */
@@ -95,7 +95,7 @@ static void sh_tmu_start_stop_ch(struct sh_tmu_priv *p, int start)
 	unsigned long flags, value;
 
 	/* start stop register shared by multiple timer channels */
-	spin_lock_irqsave(&sh_tmu_lock, flags);
+	raw_spin_lock_irqsave(&sh_tmu_lock, flags);
 	value = sh_tmu_read(p, TSTR);
 
 	if (start)
@@ -104,7 +104,7 @@ static void sh_tmu_start_stop_ch(struct sh_tmu_priv *p, int start)
 		value &= ~(1 << cfg->timer_bit);
 
 	sh_tmu_write(p, TSTR, value);
-	spin_unlock_irqrestore(&sh_tmu_lock, flags);
+	raw_spin_unlock_irqrestore(&sh_tmu_lock, flags);
 }
 
 static int sh_tmu_enable(struct sh_tmu_priv *p)
@@ -245,12 +245,7 @@ static void sh_tmu_clock_event_start(struct sh_tmu_priv *p, int periodic)
 
 	sh_tmu_enable(p);
 
-	/* TODO: calculate good shift from rate and counter bit width */
-
-	ced->shift = 32;
-	ced->mult = div_sc(p->rate, NSEC_PER_SEC, ced->shift);
-	ced->max_delta_ns = clockevent_delta2ns(0xffffffff, ced);
-	ced->min_delta_ns = 5000;
+	clockevents_config(ced, p->rate);
 
 	if (periodic) {
 		p->periodic = (p->rate + HZ/2) / HZ;
@@ -323,7 +318,8 @@ static void sh_tmu_register_clockevent(struct sh_tmu_priv *p,
 	ced->set_mode = sh_tmu_clock_event_mode;
 
 	dev_info(&p->pdev->dev, "used for clock events\n");
-	clockevents_register_device(ced);
+
+	clockevents_config_and_register(ced, 1, 0x300, 0xffffffff);
 
 	ret = setup_irq(p->irqaction.irq, &p->irqaction);
 	if (ret) {

drivers/gpu/drm/radeon/evergreen_cs.c

@@ -52,6 +52,7 @@ struct evergreen_cs_track {
 	u32			cb_color_view[12];
 	u32			cb_color_pitch[12];
 	u32			cb_color_slice[12];
+	u32			cb_color_slice_idx[12];
 	u32			cb_color_attrib[12];
 	u32			cb_color_cmask_slice[8];/* unused */
 	u32			cb_color_fmask_slice[8];/* unused */
@@ -127,12 +128,14 @@ static void evergreen_cs_track_init(struct evergreen_cs_track *track)
 		track->cb_color_info[i] = 0;
 		track->cb_color_view[i] = 0xFFFFFFFF;
 		track->cb_color_pitch[i] = 0;
-		track->cb_color_slice[i] = 0;
+		track->cb_color_slice[i] = 0xfffffff;
+		track->cb_color_slice_idx[i] = 0;
 	}
 	track->cb_target_mask = 0xFFFFFFFF;
 	track->cb_shader_mask = 0xFFFFFFFF;
 	track->cb_dirty = true;
 
+	track->db_depth_slice = 0xffffffff;
 	track->db_depth_view = 0xFFFFC000;
 	track->db_depth_size = 0xFFFFFFFF;
 	track->db_depth_control = 0xFFFFFFFF;
@@ -250,10 +253,9 @@ static int evergreen_surface_check_2d(struct radeon_cs_parser *p,
 {
 	struct evergreen_cs_track *track = p->track;
 	unsigned palign, halign, tileb, slice_pt;
+	unsigned mtile_pr, mtile_ps, mtileb;
 
 	tileb = 64 * surf->bpe * surf->nsamples;
-	palign = track->group_size / (8 * surf->bpe * surf->nsamples);
-	palign = MAX(8, palign);
 	slice_pt = 1;
 	if (tileb > surf->tsplit) {
 		slice_pt = tileb / surf->tsplit;
@@ -262,7 +264,10 @@ static int evergreen_surface_check_2d(struct radeon_cs_parser *p,
 	/* macro tile width & height */
 	palign = (8 * surf->bankw * track->npipes) * surf->mtilea;
 	halign = (8 * surf->bankh * surf->nbanks) / surf->mtilea;
-	surf->layer_size = surf->nbx * surf->nby * surf->bpe * slice_pt;
+	mtileb = (palign / 8) * (halign / 8) * tileb;;
+	mtile_pr = surf->nbx / palign;
+	mtile_ps = (mtile_pr * surf->nby) / halign;
+	surf->layer_size = mtile_ps * mtileb * slice_pt;
 	surf->base_align = (palign / 8) * (halign / 8) * tileb;
 	surf->palign = palign;
 	surf->halign = halign;
@@ -434,6 +439,39 @@ static int evergreen_cs_track_validate_cb(struct radeon_cs_parser *p, unsigned i
 
 	offset += surf.layer_size * mslice;
 	if (offset > radeon_bo_size(track->cb_color_bo[id])) {
+		/* old ddx are broken they allocate bo with w*h*bpp but
+		 * program slice with ALIGN(h, 8), catch this and patch
+		 * command stream.
+		 */
+		if (!surf.mode) {
+			volatile u32 *ib = p->ib.ptr;
+			unsigned long tmp, nby, bsize, size, min = 0;
+
+			/* find the height the ddx wants */
+			if (surf.nby > 8) {
+				min = surf.nby - 8;
+			}
+			bsize = radeon_bo_size(track->cb_color_bo[id]);
+			tmp = track->cb_color_bo_offset[id] << 8;
+			for (nby = surf.nby; nby > min; nby--) {
+				size = nby * surf.nbx * surf.bpe * surf.nsamples;
+				if ((tmp + size * mslice) <= bsize) {
+					break;
+				}
+			}
+			if (nby > min) {
+				surf.nby = nby;
+				slice = ((nby * surf.nbx) / 64) - 1;
+				if (!evergreen_surface_check(p, &surf, "cb")) {
+					/* check if this one works */
+					tmp += surf.layer_size * mslice;
+					if (tmp <= bsize) {
+						ib[track->cb_color_slice_idx[id]] = slice;
+						goto old_ddx_ok;
+					}
+				}
+			}
+		}
 		dev_warn(p->dev, "%s:%d cb[%d] bo too small (layer size %d, "
 			 "offset %d, max layer %d, bo size %ld, slice %d)\n",
 			 __func__, __LINE__, id, surf.layer_size,
@@ -446,6 +484,7 @@ static int evergreen_cs_track_validate_cb(struct radeon_cs_parser *p, unsigned i
 			surf.tsplit, surf.mtilea);
 		return -EINVAL;
 	}
+old_ddx_ok:
 
 	return 0;
 }
@@ -1532,6 +1571,7 @@ static int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx)
 	case CB_COLOR7_SLICE:
 		tmp = (reg - CB_COLOR0_SLICE) / 0x3c;
 		track->cb_color_slice[tmp] = radeon_get_ib_value(p, idx);
+		track->cb_color_slice_idx[tmp] = idx;
 		track->cb_dirty = true;
 		break;
 	case CB_COLOR8_SLICE:
@@ -1540,6 +1580,7 @@ static int evergreen_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx)
 	case CB_COLOR11_SLICE:
 		tmp = ((reg - CB_COLOR8_SLICE) / 0x1c) + 8;
 		track->cb_color_slice[tmp] = radeon_get_ib_value(p, idx);
+		track->cb_color_slice_idx[tmp] = idx;
 		track->cb_dirty = true;
 		break;
 	case CB_COLOR0_ATTRIB:

drivers/gpu/drm/radeon/radeon_drv.c

@@ -57,9 +57,10 @@
  *   2.13.0 - virtual memory support, streamout
  *   2.14.0 - add evergreen tiling informations
  *   2.15.0 - add max_pipes query
+ *   2.16.0 - fix evergreen 2D tiled surface calculation
  */
 #define KMS_DRIVER_MAJOR	2
-#define KMS_DRIVER_MINOR	15
+#define KMS_DRIVER_MINOR	16
 #define KMS_DRIVER_PATCHLEVEL	0
 int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags);
 int radeon_driver_unload_kms(struct drm_device *dev);

drivers/gpu/drm/ttm/ttm_bo.c

@@ -1204,6 +1204,7 @@ int ttm_bo_init(struct ttm_bo_device *bdev,
 			(*destroy)(bo);
 		else
 			kfree(bo);
+		ttm_mem_global_free(mem_glob, acc_size);
 		return -EINVAL;
 	}
 	bo->destroy = destroy;
@@ -1307,22 +1308,14 @@ int ttm_bo_create(struct ttm_bo_device *bdev,
 			struct ttm_buffer_object **p_bo)
 {
 	struct ttm_buffer_object *bo;
-	struct ttm_mem_global *mem_glob = bdev->glob->mem_glob;
 	size_t acc_size;
 	int ret;
 
-	acc_size = ttm_bo_acc_size(bdev, size, sizeof(struct ttm_buffer_object));
-	ret = ttm_mem_global_alloc(mem_glob, acc_size, false, false);
-	if (unlikely(ret != 0))
-		return ret;
-
 	bo = kzalloc(sizeof(*bo), GFP_KERNEL);
-
-	if (unlikely(bo == NULL)) {
-		ttm_mem_global_free(mem_glob, acc_size);
+	if (unlikely(bo == NULL))
 		return -ENOMEM;
-	}
 
+	acc_size = ttm_bo_acc_size(bdev, size, sizeof(struct ttm_buffer_object));
 	ret = ttm_bo_init(bdev, bo, size, type, placement, page_alignment,
 				buffer_start, interruptible,
 			  persistent_swap_storage, acc_size, NULL, NULL);

drivers/gpu/vga/vga_switcheroo.c

@@ -190,6 +190,19 @@ find_active_client(struct list_head *head)
 	return NULL;
 }
 
+int vga_switcheroo_get_client_state(struct pci_dev *pdev)
+{
+	struct vga_switcheroo_client *client;
+
+	client = find_client_from_pci(&vgasr_priv.clients, pdev);
+	if (!client)
+		return VGA_SWITCHEROO_NOT_FOUND;
+	if (!vgasr_priv.active)
+		return VGA_SWITCHEROO_INIT;
+	return client->pwr_state;
+}
+EXPORT_SYMBOL(vga_switcheroo_get_client_state);
+
 void vga_switcheroo_unregister_client(struct pci_dev *pdev)
 {
 	struct vga_switcheroo_client *client;
@@ -291,8 +304,6 @@ static int vga_switchto_stage1(struct vga_switcheroo_client *new_client)
 		vga_switchon(new_client);
 
 	vga_set_default_device(new_client->pdev);
-	set_audio_state(new_client->id, VGA_SWITCHEROO_ON);
-
 	return 0;
 }
 
@@ -308,6 +319,8 @@ static int vga_switchto_stage2(struct vga_switcheroo_client *new_client)
 
 	active->active = false;
 
+	set_audio_state(active->id, VGA_SWITCHEROO_OFF);
+
 	if (new_client->fb_info) {
 		struct fb_event event;
 		event.info = new_client->fb_info;
@@ -321,11 +334,11 @@ static int vga_switchto_stage2(struct vga_switcheroo_client *new_client)
 	if (new_client->ops->reprobe)
 		new_client->ops->reprobe(new_client->pdev);
 
-	set_audio_state(active->id, VGA_SWITCHEROO_OFF);
-
 	if (active->pwr_state == VGA_SWITCHEROO_ON)
 		vga_switchoff(active);
 
+	set_audio_state(new_client->id, VGA_SWITCHEROO_ON);
+
 	new_client->active = true;
 	return 0;
 }
@@ -371,8 +384,9 @@ vga_switcheroo_debugfs_write(struct file *filp, const char __user *ubuf,
 	/* pwr off the device not in use */
 	if (strncmp(usercmd, "OFF", 3) == 0) {
 		list_for_each_entry(client, &vgasr_priv.clients, list) {
-			if (client->active)
+			if (client->active || client_is_audio(client))
 				continue;
+			set_audio_state(client->id, VGA_SWITCHEROO_OFF);
 			if (client->pwr_state == VGA_SWITCHEROO_ON)
 				vga_switchoff(client);
 		}
@@ -381,10 +395,11 @@ vga_switcheroo_debugfs_write(struct file *filp, const char __user *ubuf,
 	/* pwr on the device not in use */
 	if (strncmp(usercmd, "ON", 2) == 0) {
 		list_for_each_entry(client, &vgasr_priv.clients, list) {
-			if (client->active)
+			if (client->active || client_is_audio(client))
 				continue;
 			if (client->pwr_state == VGA_SWITCHEROO_OFF)
 				vga_switchon(client);
+			set_audio_state(client->id, VGA_SWITCHEROO_ON);
 		}
 		goto out;
 	}

drivers/ide/icside.c

@@ -236,7 +236,7 @@ static const struct ide_port_ops icside_v6_no_dma_port_ops = {
  */
 static void icside_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
-	unsigned long cycle_time;
+	unsigned long cycle_time = 0;
 	int use_dma_info = 0;
 	const u8 xfer_mode = drive->dma_mode;
 
@@ -271,9 +271,9 @@ static void icside_set_dma_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 
 	ide_set_drivedata(drive, (void *)cycle_time);
 
-	printk("%s: %s selected (peak %dMB/s)\n", drive->name,
-		ide_xfer_verbose(xfer_mode),
-		2000 / (unsigned long)ide_get_drivedata(drive));
+	printk(KERN_INFO "%s: %s selected (peak %luMB/s)\n",
+	       drive->name, ide_xfer_verbose(xfer_mode),
+	       2000 / (cycle_time ? cycle_time : (unsigned long) -1));
 }
 
 static const struct ide_port_ops icside_v6_port_ops = {
@@ -375,8 +375,6 @@ static const struct ide_dma_ops icside_v6_dma_ops = {
 	.dma_test_irq		= icside_dma_test_irq,
 	.dma_lost_irq		= ide_dma_lost_irq,
 };
-#else
-#define icside_v6_dma_ops NULL
 #endif
 
 static int icside_dma_off_init(ide_hwif_t *hwif, const struct ide_port_info *d)
@@ -456,7 +454,6 @@ err_free:
 static const struct ide_port_info icside_v6_port_info __initdata = {
 	.init_dma		= icside_dma_off_init,
 	.port_ops		= &icside_v6_no_dma_port_ops,
-	.dma_ops		= &icside_v6_dma_ops,
 	.host_flags		= IDE_HFLAG_SERIALIZE | IDE_HFLAG_MMIO,
 	.mwdma_mask		= ATA_MWDMA2,
 	.swdma_mask		= ATA_SWDMA2,
@@ -518,11 +515,13 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
 
 	ecard_set_drvdata(ec, state);
 
+#ifdef CONFIG_BLK_DEV_IDEDMA_ICS
 	if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) {
 		d.init_dma = icside_dma_init;
 		d.port_ops = &icside_v6_port_ops;
-	} else
-		d.dma_ops = NULL;
+		d.dma_ops  = &icside_v6_dma_ops;
+	}
+#endif
 
 	ret = ide_host_register(host, &d, hws);
 	if (ret)

drivers/ide/ide-cs.c

@@ -167,7 +167,8 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev, void *priv_data)
 {
 	int *is_kme = priv_data;
 
-	if (!(pdev->resource[0]->flags & IO_DATA_PATH_WIDTH_8)) {
+	if ((pdev->resource[0]->flags & IO_DATA_PATH_WIDTH)
+	    != IO_DATA_PATH_WIDTH_8) {
 		pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
 		pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 	}

drivers/leds/Kconfig

@@ -379,7 +379,7 @@ config LEDS_NETXBIG
 
 config LEDS_ASIC3
 	bool "LED support for the HTC ASIC3"
-	depends on LEDS_CLASS
+	depends on LEDS_CLASS=y
 	depends on MFD_ASIC3
 	default y
 	help
@@ -390,7 +390,7 @@ config LEDS_ASIC3
 
 config LEDS_RENESAS_TPU
 	bool "LED support for Renesas TPU"
-	depends on LEDS_CLASS && HAVE_CLK && GENERIC_GPIO
+	depends on LEDS_CLASS=y && HAVE_CLK && GENERIC_GPIO
 	help
 	  This option enables build of the LED TPU platform driver,
 	  suitable to drive any TPU channel on newer Renesas SoCs.

drivers/leds/led-class.c

@@ -29,7 +29,7 @@ static void led_update_brightness(struct led_classdev *led_cdev)
 		led_cdev->brightness = led_cdev->brightness_get(led_cdev);
 }
 
-static ssize_t led_brightness_show(struct device *dev, 
+static ssize_t led_brightness_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
 	struct led_classdev *led_cdev = dev_get_drvdata(dev);

drivers/leds/led-core.c

@@ -44,13 +44,6 @@ static void led_set_software_blink(struct led_classdev *led_cdev,
 	if (!led_cdev->blink_brightness)
 		led_cdev->blink_brightness = led_cdev->max_brightness;
 
-	if (led_get_trigger_data(led_cdev) &&
-	    delay_on == led_cdev->blink_delay_on &&
-	    delay_off == led_cdev->blink_delay_off)
-		return;
-
-	led_stop_software_blink(led_cdev);
-
 	led_cdev->blink_delay_on = delay_on;
 	led_cdev->blink_delay_off = delay_off;
 

drivers/net/bonding/bond_main.c

@@ -76,6 +76,7 @@
 #include <net/route.h>
 #include <net/net_namespace.h>
 #include <net/netns/generic.h>
+#include <net/pkt_sched.h>
 #include "bonding.h"
 #include "bond_3ad.h"
 #include "bond_alb.h"
@@ -381,8 +382,6 @@ struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr)
 	return next;
 }
 
-#define bond_queue_mapping(skb) (*(u16 *)((skb)->cb))
-
 /**
  * bond_dev_queue_xmit - Prepare skb for xmit.
  *
@@ -395,7 +394,9 @@ int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb,
 {
 	skb->dev = slave_dev;
 
-	skb->queue_mapping = bond_queue_mapping(skb);
+	BUILD_BUG_ON(sizeof(skb->queue_mapping) !=
+		     sizeof(qdisc_skb_cb(skb)->bond_queue_mapping));
+	skb->queue_mapping = qdisc_skb_cb(skb)->bond_queue_mapping;
 
 	if (unlikely(netpoll_tx_running(slave_dev)))
 		bond_netpoll_send_skb(bond_get_slave_by_dev(bond, slave_dev), skb);
@@ -4171,7 +4172,7 @@ static u16 bond_select_queue(struct net_device *dev, struct sk_buff *skb)
 	/*
 	 * Save the original txq to restore before passing to the driver
 	 */
-	bond_queue_mapping(skb) = skb->queue_mapping;
+	qdisc_skb_cb(skb)->bond_queue_mapping = skb->queue_mapping;
 
 	if (unlikely(txq >= dev->real_num_tx_queues)) {
 		do {

drivers/net/bonding/bond_sysfs.c

@@ -1082,8 +1082,12 @@ static ssize_t bonding_store_primary(struct device *d,
 		}
 	}
 
-	pr_info("%s: Unable to set %.*s as primary slave.\n",
-		bond->dev->name, (int)strlen(buf) - 1, buf);
+	strncpy(bond->params.primary, ifname, IFNAMSIZ);
+	bond->params.primary[IFNAMSIZ - 1] = 0;
+
+	pr_info("%s: Recording %s as primary, "
+		"but it has not been enslaved to %s yet.\n",
+		bond->dev->name, ifname, bond->dev->name);
 out:
 	write_unlock_bh(&bond->curr_slave_lock);
 	read_unlock(&bond->lock);

drivers/net/can/c_can/c_can.c

@@ -686,7 +686,7 @@ static int c_can_get_berr_counter(const struct net_device *dev,
  *
  * We iterate from priv->tx_echo to priv->tx_next and check if the
  * packet has been transmitted, echo it back to the CAN framework.
- * If we discover a not yet transmitted package, stop looking for more.
+ * If we discover a not yet transmitted packet, stop looking for more.
  */
 static void c_can_do_tx(struct net_device *dev)
 {
@@ -698,7 +698,7 @@ static void c_can_do_tx(struct net_device *dev)
 	for (/* nix */; (priv->tx_next - priv->tx_echo) > 0; priv->tx_echo++) {
 		msg_obj_no = get_tx_echo_msg_obj(priv);
 		val = c_can_read_reg32(priv, &priv->regs->txrqst1);
-		if (!(val & (1 << msg_obj_no))) {
+		if (!(val & (1 << (msg_obj_no - 1)))) {
 			can_get_echo_skb(dev,
 					msg_obj_no - C_CAN_MSG_OBJ_TX_FIRST);
 			stats->tx_bytes += priv->read_reg(priv,
@@ -706,6 +706,8 @@ static void c_can_do_tx(struct net_device *dev)
 					& IF_MCONT_DLC_MASK;
 			stats->tx_packets++;
 			c_can_inval_msg_object(dev, 0, msg_obj_no);
+		} else {
+			break;
 		}
 	}
 
@@ -950,7 +952,7 @@ static int c_can_poll(struct napi_struct *napi, int quota)
 	struct net_device *dev = napi->dev;
 	struct c_can_priv *priv = netdev_priv(dev);
 
-	irqstatus = priv->read_reg(priv, &priv->regs->interrupt);
+	irqstatus = priv->irqstatus;
 	if (!irqstatus)
 		goto end;
 
@@ -1028,12 +1030,11 @@ end:
 
 static irqreturn_t c_can_isr(int irq, void *dev_id)
 {
-	u16 irqstatus;
 	struct net_device *dev = (struct net_device *)dev_id;
 	struct c_can_priv *priv = netdev_priv(dev);
 
-	irqstatus = priv->read_reg(priv, &priv->regs->interrupt);
-	if (!irqstatus)
+	priv->irqstatus = priv->read_reg(priv, &priv->regs->interrupt);
+	if (!priv->irqstatus)
 		return IRQ_NONE;
 
 	/* disable all interrupts and schedule the NAPI */
@@ -1063,10 +1064,11 @@ static int c_can_open(struct net_device *dev)
 		goto exit_irq_fail;
 	}
 
+	napi_enable(&priv->napi);
+
 	/* start the c_can controller */
 	c_can_start(dev);
 
-	napi_enable(&priv->napi);
 	netif_start_queue(dev);
 
 	return 0;

drivers/net/can/c_can/c_can.h

@@ -76,6 +76,7 @@ struct c_can_priv {
 	unsigned int tx_next;
 	unsigned int tx_echo;
 	void *priv;		/* for board-specific data */
+	u16 irqstatus;
 };
 
 struct net_device *alloc_c_can_dev(void);

drivers/net/can/cc770/cc770_platform.c

@@ -154,7 +154,7 @@ static int __devinit cc770_get_platform_data(struct platform_device *pdev,
 	struct cc770_platform_data *pdata = pdev->dev.platform_data;
 
 	priv->can.clock.freq = pdata->osc_freq;
-	if (priv->cpu_interface | CPUIF_DSC)
+	if (priv->cpu_interface & CPUIF_DSC)
 		priv->can.clock.freq /= 2;
 	priv->clkout = pdata->cor;
 	priv->bus_config = pdata->bcr;

drivers/net/dummy.c

@@ -187,8 +187,10 @@ static int __init dummy_init_module(void)
 	rtnl_lock();
 	err = __rtnl_link_register(&dummy_link_ops);
 
-	for (i = 0; i < numdummies && !err; i++)
+	for (i = 0; i < numdummies && !err; i++) {
 		err = dummy_init_one();
+		cond_resched();
+	}
 	if (err < 0)
 		__rtnl_link_unregister(&dummy_link_ops);
 	rtnl_unlock();