Linux 3.1-rc5

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/radeon/kms: make sure pci max read request size is valid on evergreen+ (v2)
  drm/radeon/kms: set a default max_pixel_clock

Documentation/PCI/MSI-HOWTO.txt

@@ -45,7 +45,7 @@ arrived in memory (this becomes more likely with devices behind PCI-PCI
 bridges).  In order to ensure that all the data has arrived in memory,
 the interrupt handler must read a register on the device which raised
 the interrupt.  PCI transaction ordering rules require that all the data
-arrives in memory before the value can be returned from the register.
+arrive in memory before the value may be returned from the register.
 Using MSIs avoids this problem as the interrupt-generating write cannot
 pass the data writes, so by the time the interrupt is raised, the driver
 knows that all the data has arrived in memory.
@@ -86,13 +86,13 @@ device.
 
 int pci_enable_msi(struct pci_dev *dev)
 
-A successful call will allocate ONE interrupt to the device, regardless
-of how many MSIs the device supports.  The device will be switched from
+A successful call allocates ONE interrupt to the device, regardless
+of how many MSIs the device supports.  The device is switched from
 pin-based interrupt mode to MSI mode.  The dev->irq number is changed
-to a new number which represents the message signaled interrupt.
-This function should be called before the driver calls request_irq()
-since enabling MSIs disables the pin-based IRQ and the driver will not
-receive interrupts on the old interrupt.
+to a new number which represents the message signaled interrupt;
+consequently, this function should be called before the driver calls
+request_irq(), because an MSI is delivered via a vector that is
+different from the vector of a pin-based interrupt.
 
 4.2.2 pci_enable_msi_block
 
@@ -111,20 +111,20 @@ the device are in the range dev->irq to dev->irq + count - 1.
 
 If this function returns a negative number, it indicates an error and
 the driver should not attempt to request any more MSI interrupts for
-this device.  If this function returns a positive number, it will be
-less than 'count' and indicate the number of interrupts that could have
-been allocated.  In neither case will the irq value have been
-updated, nor will the device have been switched into MSI mode.
+this device.  If this function returns a positive number, it is
+less than 'count' and indicates the number of interrupts that could have
+been allocated.  In neither case is the irq value updated or the device
+switched into MSI mode.
 
 The device driver must decide what action to take if
-pci_enable_msi_block() returns a value less than the number asked for.
-Some devices can make use of fewer interrupts than the maximum they
-request; in this case the driver should call pci_enable_msi_block()
+pci_enable_msi_block() returns a value less than the number requested.
+For instance, the driver could still make use of fewer interrupts;
+in this case the driver should call pci_enable_msi_block()
 again.  Note that it is not guaranteed to succeed, even when the
 'count' has been reduced to the value returned from a previous call to
 pci_enable_msi_block().  This is because there are multiple constraints
 on the number of vectors that can be allocated; pci_enable_msi_block()
-will return as soon as it finds any constraint that doesn't allow the
+returns as soon as it finds any constraint that doesn't allow the
 call to succeed.
 
 4.2.3 pci_disable_msi
@@ -137,10 +137,10 @@ interrupt number and frees the previously allocated message signaled
 interrupt(s).  The interrupt may subsequently be assigned to another
 device, so drivers should not cache the value of dev->irq.
 
-A device driver must always call free_irq() on the interrupt(s)
-for which it has called request_irq() before calling this function.
-Failure to do so will result in a BUG_ON(), the device will be left with
-MSI enabled and will leak its vector.
+Before calling this function, a device driver must always call free_irq()
+on any interrupt for which it previously called request_irq().
+Failure to do so results in a BUG_ON(), leaving the device with
+MSI enabled and thus leaking its vector.
 
 4.3 Using MSI-X
 
@@ -155,10 +155,10 @@ struct msix_entry {
 };
 
 This allows for the device to use these interrupts in a sparse fashion;
-for example it could use interrupts 3 and 1027 and allocate only a
+for example, it could use interrupts 3 and 1027 and yet allocate only a
 two-element array.  The driver is expected to fill in the 'entry' value
-in each element of the array to indicate which entries it wants the kernel
-to assign interrupts for.  It is invalid to fill in two entries with the
+in each element of the array to indicate for which entries the kernel
+should assign interrupts; it is invalid to fill in two entries with the
 same number.
 
 4.3.1 pci_enable_msix
@@ -168,10 +168,11 @@ int pci_enable_msix(struct pci_dev *dev, struct msix_entry *entries, int nvec)
 Calling this function asks the PCI subsystem to allocate 'nvec' MSIs.
 The 'entries' argument is a pointer to an array of msix_entry structs
 which should be at least 'nvec' entries in size.  On success, the
-function will return 0 and the device will have been switched into
-MSI-X interrupt mode.  The 'vector' elements in each entry will have
-been filled in with the interrupt number.  The driver should then call
-request_irq() for each 'vector' that it decides to use.
+device is switched into MSI-X mode and the function returns 0.
+The 'vector' member in each entry is populated with the interrupt number;
+the driver should then call request_irq() for each 'vector' that it
+decides to use.  The device driver is responsible for keeping track of the
+interrupts assigned to the MSI-X vectors so it can free them again later.
 
 If this function returns a negative number, it indicates an error and
 the driver should not attempt to allocate any more MSI-X interrupts for
@@ -181,16 +182,14 @@ below.
 
 This function, in contrast with pci_enable_msi(), does not adjust
 dev->irq.  The device will not generate interrupts for this interrupt
-number once MSI-X is enabled.  The device driver is responsible for
-keeping track of the interrupts assigned to the MSI-X vectors so it can
-free them again later.
+number once MSI-X is enabled.
 
 Device drivers should normally call this function once per device
 during the initialization phase.
 
-It is ideal if drivers can cope with a variable number of MSI-X interrupts,
+It is ideal if drivers can cope with a variable number of MSI-X interrupts;
 there are many reasons why the platform may not be able to provide the
-exact number a driver asks for.
+exact number that a driver asks for.
 
 A request loop to achieve that might look like:
 
@@ -212,15 +211,15 @@ static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
 
 void pci_disable_msix(struct pci_dev *dev)
 
-This API should be used to undo the effect of pci_enable_msix().  It frees
+This function should be used to undo the effect of pci_enable_msix().  It frees
 the previously allocated message signaled interrupts.  The interrupts may
 subsequently be assigned to another device, so drivers should not cache
 the value of the 'vector' elements over a call to pci_disable_msix().
 
-A device driver must always call free_irq() on the interrupt(s)
-for which it has called request_irq() before calling this function.
-Failure to do so will result in a BUG_ON(), the device will be left with
-MSI enabled and will leak its vector.
+Before calling this function, a device driver must always call free_irq()
+on any interrupt for which it previously called request_irq().
+Failure to do so results in a BUG_ON(), leaving the device with
+MSI-X enabled and thus leaking its vector.
 
 4.3.3 The MSI-X Table
 
@@ -232,10 +231,10 @@ mask or unmask an interrupt, it should call disable_irq() / enable_irq().
 4.4 Handling devices implementing both MSI and MSI-X capabilities
 
 If a device implements both MSI and MSI-X capabilities, it can
-run in either MSI mode or MSI-X mode but not both simultaneously.
+run in either MSI mode or MSI-X mode, but not both simultaneously.
 This is a requirement of the PCI spec, and it is enforced by the
 PCI layer.  Calling pci_enable_msi() when MSI-X is already enabled or
-pci_enable_msix() when MSI is already enabled will result in an error.
+pci_enable_msix() when MSI is already enabled results in an error.
 If a device driver wishes to switch between MSI and MSI-X at runtime,
 it must first quiesce the device, then switch it back to pin-interrupt
 mode, before calling pci_enable_msi() or pci_enable_msix() and resuming
@@ -251,7 +250,7 @@ the MSI-X facilities in preference to the MSI facilities.  As mentioned
 above, MSI-X supports any number of interrupts between 1 and 2048.
 In constrast, MSI is restricted to a maximum of 32 interrupts (and
 must be a power of two).  In addition, the MSI interrupt vectors must
-be allocated consecutively, so the system may not be able to allocate
+be allocated consecutively, so the system might not be able to allocate
 as many vectors for MSI as it could for MSI-X.  On some platforms, MSI
 interrupts must all be targeted at the same set of CPUs whereas MSI-X
 interrupts can all be targeted at different CPUs.
@@ -281,7 +280,7 @@ disabled to enabled and back again.
 
 Using 'lspci -v' (as root) may show some devices with "MSI", "Message
 Signalled Interrupts" or "MSI-X" capabilities.  Each of these capabilities
-has an 'Enable' flag which will be followed with either "+" (enabled)
+has an 'Enable' flag which is followed with either "+" (enabled)
 or "-" (disabled).
 
 
@@ -298,7 +297,7 @@ The PCI stack provides three ways to disable MSIs:
 
 Some host chipsets simply don't support MSIs properly.  If we're
 lucky, the manufacturer knows this and has indicated it in the ACPI
-FADT table.  In this case, Linux will automatically disable MSIs.
+FADT table.  In this case, Linux automatically disables MSIs.
 Some boards don't include this information in the table and so we have
 to detect them ourselves.  The complete list of these is found near the
 quirk_disable_all_msi() function in drivers/pci/quirks.c.
@@ -317,7 +316,7 @@ Some bridges allow you to enable MSIs by changing some bits in their
 PCI configuration space (especially the Hypertransport chipsets such
 as the nVidia nForce and Serverworks HT2000).  As with host chipsets,
 Linux mostly knows about them and automatically enables MSIs if it can.
-If you have a bridge which Linux doesn't yet know about, you can enable
+If you have a bridge unknown to Linux, you can enable
 MSIs in configuration space using whatever method you know works, then
 enable MSIs on that bridge by doing:
 
@@ -327,7 +326,7 @@ where $bridge is the PCI address of the bridge you've enabled (eg
 0000:00:0e.0).
 
 To disable MSIs, echo 0 instead of 1.  Changing this value should be
-done with caution as it can break interrupt handling for all devices
+done with caution as it could break interrupt handling for all devices
 below this bridge.
 
 Again, please notify linux-pci@vger.kernel.org of any bridges that need
@@ -336,7 +335,7 @@ special handling.
 5.3. Disabling MSIs on a single device
 
 Some devices are known to have faulty MSI implementations.  Usually this
-is handled in the individual device driver but occasionally it's necessary
+is handled in the individual device driver, but occasionally it's necessary
 to handle this with a quirk.  Some drivers have an option to disable use
 of MSI.  While this is a convenient workaround for the driver author,
 it is not good practise, and should not be emulated.
@@ -350,7 +349,7 @@ for your machine.  You should also check your .config to be sure you
 have enabled CONFIG_PCI_MSI.
 
 Then, 'lspci -t' gives the list of bridges above a device.  Reading
-/sys/bus/pci/devices/*/msi_bus will tell you whether MSI are enabled (1)
+/sys/bus/pci/devices/*/msi_bus will tell you whether MSIs are enabled (1)
 or disabled (0).  If 0 is found in any of the msi_bus files belonging
 to bridges between the PCI root and the device, MSIs are disabled.
 

Documentation/block/cfq-iosched.txt

@@ -43,3 +43,74 @@ If one sets slice_idle=0 and if storage supports NCQ, CFQ internally switches
 to IOPS mode and starts providing fairness in terms of number of requests
 dispatched. Note that this mode switching takes effect only for group
 scheduling. For non-cgroup users nothing should change.
+
+CFQ IO scheduler Idling Theory
+===============================
+Idling on a queue is primarily about waiting for the next request to come
+on same queue after completion of a request. In this process CFQ will not
+dispatch requests from other cfq queues even if requests are pending there.
+
+The rationale behind idling is that it can cut down on number of seeks
+on rotational media. For example, if a process is doing dependent
+sequential reads (next read will come on only after completion of previous
+one), then not dispatching request from other queue should help as we
+did not move the disk head and kept on dispatching sequential IO from
+one queue.
+
+CFQ has following service trees and various queues are put on these trees.
+
+	sync-idle	sync-noidle	async
+
+All cfq queues doing synchronous sequential IO go on to sync-idle tree.
+On this tree we idle on each queue individually.
+
+All synchronous non-sequential queues go on sync-noidle tree. Also any
+request which are marked with REQ_NOIDLE go on this service tree. On this
+tree we do not idle on individual queues instead idle on the whole group
+of queues or the tree. So if there are 4 queues waiting for IO to dispatch
+we will idle only once last queue has dispatched the IO and there is
+no more IO on this service tree.
+
+All async writes go on async service tree. There is no idling on async
+queues.
+
+CFQ has some optimizations for SSDs and if it detects a non-rotational
+media which can support higher queue depth (multiple requests at in
+flight at a time), then it cuts down on idling of individual queues and
+all the queues move to sync-noidle tree and only tree idle remains. This
+tree idling provides isolation with buffered write queues on async tree.
+
+FAQ
+===
+Q1. Why to idle at all on queues marked with REQ_NOIDLE.
+
+A1. We only do tree idle (all queues on sync-noidle tree) on queues marked
+    with REQ_NOIDLE. This helps in providing isolation with all the sync-idle
+    queues. Otherwise in presence of many sequential readers, other
+    synchronous IO might not get fair share of disk.
+
+    For example, if there are 10 sequential readers doing IO and they get
+    100ms each. If a REQ_NOIDLE request comes in, it will be scheduled
+    roughly after 1 second. If after completion of REQ_NOIDLE request we
+    do not idle, and after a couple of milli seconds a another REQ_NOIDLE
+    request comes in, again it will be scheduled after 1second. Repeat it
+    and notice how a workload can lose its disk share and suffer due to
+    multiple sequential readers.
+
+    fsync can generate dependent IO where bunch of data is written in the
+    context of fsync, and later some journaling data is written. Journaling
+    data comes in only after fsync has finished its IO (atleast for ext4
+    that seemed to be the case). Now if one decides not to idle on fsync
+    thread due to REQ_NOIDLE, then next journaling write will not get
+    scheduled for another second. A process doing small fsync, will suffer
+    badly in presence of multiple sequential readers.
+
+    Hence doing tree idling on threads using REQ_NOIDLE flag on requests
+    provides isolation from multiple sequential readers and at the same
+    time we do not idle on individual threads.
+
+Q2. When to specify REQ_NOIDLE
+A2. I would think whenever one is doing synchronous write and not expecting
+    more writes to be dispatched from same context soon, should be able
+    to specify REQ_NOIDLE on writes and that probably should work well for
+    most of the cases.

Documentation/feature-removal-schedule.txt

@@ -592,3 +592,11 @@ Why:    In 3.0, we can now autodetect internal 3G device and already have
 	interface that was used by acer-wmi driver. It will replaced by
 	information log when acer-wmi initial.
 Who:    Lee, Chun-Yi <jlee@novell.com>
+
+----------------------------
+What:	The XFS nodelaylog mount option
+When:	3.3
+Why:	The delaylog mode that has been the default since 2.6.39 has proven
+	stable, and the old code is in the way of additional improvements in
+	the log code.
+Who:	Christoph Hellwig <hch@lst.de>

Documentation/kernel-parameters.txt

@@ -1350,9 +1350,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			it is equivalent to "nosmp", which also disables
 			the IO APIC.
 
-	max_loop=	[LOOP] Maximum number of loopback devices that can
-			be mounted
-			Format: <1-256>
+	max_loop=	[LOOP] The number of loop block devices that get
+	(loop.max_loop)	unconditionally pre-created at init time. The default
+			number is configured by BLK_DEV_LOOP_MIN_COUNT. Instead
+			of statically allocating a predefined number, loop
+			devices can be requested on-demand with the
+			/dev/loop-control interface.
 
 	mcatest=	[IA-64]
 

Documentation/networking/00-INDEX

@@ -1,13 +1,21 @@
 00-INDEX
 	- this file
+3c359.txt
+	- information on the 3Com TokenLink Velocity XL (3c5359) driver.
 3c505.txt
 	- information on the 3Com EtherLink Plus (3c505) driver.
+3c509.txt
+	- information on the 3Com Etherlink III Series Ethernet cards.
 6pack.txt
 	- info on the 6pack protocol, an alternative to KISS for AX.25
 DLINK.txt
 	- info on the D-Link DE-600/DE-620 parallel port pocket adapters
 PLIP.txt
 	- PLIP: The Parallel Line Internet Protocol device driver
+README.ipw2100
+	- README for the Intel PRO/Wireless 2100 driver.
+README.ipw2200
+	- README for the Intel PRO/Wireless 2915ABG and 2200BG driver.
 README.sb1000
 	- info on General Instrument/NextLevel SURFboard1000 cable modem.
 alias.txt
@@ -20,8 +28,12 @@ atm.txt
 	- info on where to get ATM programs and support for Linux.
 ax25.txt
 	- info on using AX.25 and NET/ROM code for Linux
+batman-adv.txt
+	- B.A.T.M.A.N routing protocol on top of layer 2 Ethernet Frames.
 baycom.txt
 	- info on the driver for Baycom style amateur radio modems
+bonding.txt
+	- Linux Ethernet Bonding Driver HOWTO: link aggregation in Linux.
 bridge.txt
 	- where to get user space programs for ethernet bridging with Linux.
 can.txt
@@ -34,32 +46,60 @@ cxacru.txt
 	- Conexant AccessRunner USB ADSL Modem
 cxacru-cf.py
 	- Conexant AccessRunner USB ADSL Modem configuration file parser
+cxgb.txt
+	- Release Notes for the Chelsio N210 Linux device driver.
+dccp.txt
+	- the Datagram Congestion Control Protocol (DCCP) (RFC 4340..42).
 de4x5.txt
 	- the Digital EtherWORKS DE4?? and DE5?? PCI Ethernet driver
 decnet.txt
 	- info on using the DECnet networking layer in Linux.
 depca.txt
 	- the Digital DEPCA/EtherWORKS DE1?? and DE2?? LANCE Ethernet driver
+dl2k.txt
+	- README for D-Link DL2000-based Gigabit Ethernet Adapters (dl2k.ko).
+dm9000.txt
+	- README for the Simtec DM9000 Network driver.
 dmfe.txt
 	- info on the Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver.
+dns_resolver.txt
+	- The DNS resolver module allows kernel servies to make DNS queries.
+driver.txt
+	- Softnet driver issues.
 e100.txt
 	- info on Intel's EtherExpress PRO/100 line of 10/100 boards
 e1000.txt
 	- info on Intel's E1000 line of gigabit ethernet boards
+e1000e.txt
+	- README for the Intel Gigabit Ethernet Driver (e1000e).
 eql.txt
 	- serial IP load balancing
 ewrk3.txt
 	- the Digital EtherWORKS 3 DE203/4/5 Ethernet driver
+fib_trie.txt
+	- Level Compressed Trie (LC-trie) notes: a structure for routing.
 filter.txt
 	- Linux Socket Filtering
 fore200e.txt
 	- FORE Systems PCA-200E/SBA-200E ATM NIC driver info.
 framerelay.txt
 	- info on using Frame Relay/Data Link Connection Identifier (DLCI).
+gen_stats.txt
+	- Generic networking statistics for netlink users.
+generic_hdlc.txt
+	- The generic High Level Data Link Control (HDLC) layer.
 generic_netlink.txt
 	- info on Generic Netlink
+gianfar.txt
+	- Gianfar Ethernet Driver.
 ieee802154.txt
 	- Linux IEEE 802.15.4 implementation, API and drivers
+ifenslave.c
+	- Configure network interfaces for parallel routing (bonding).
+igb.txt
+	- README for the Intel Gigabit Ethernet Driver (igb).
+igbvf.txt
+	- README for the Intel Gigabit Ethernet Driver (igbvf).
 ip-sysctl.txt
 	- /proc/sys/net/ipv4/* variables
 ip_dynaddr.txt
@@ -68,41 +108,117 @@ ipddp.txt
 	- AppleTalk-IP Decapsulation and AppleTalk-IP Encapsulation
 iphase.txt
 	- Interphase PCI ATM (i)Chip IA Linux driver info.
+ipv6.txt
+	- Options to the ipv6 kernel module.
+ipvs-sysctl.txt
+	- Per-inode explanation of the /proc/sys/net/ipv4/vs interface.
 irda.txt
 	- where to get IrDA (infrared) utilities and info for Linux.
+ixgb.txt
+	- README for the Intel 10 Gigabit Ethernet Driver (ixgb).
+ixgbe.txt
+	- README for the Intel 10 Gigabit Ethernet Driver (ixgbe).
+ixgbevf.txt
+	- README for the Intel Virtual Function (VF) Driver (ixgbevf).
+l2tp.txt
+	- User guide to the L2TP tunnel protocol.
 lapb-module.txt
 	- programming information of the LAPB module.
 ltpc.txt
 	- the Apple or Farallon LocalTalk PC card driver
+mac80211-injection.txt
+	- HOWTO use packet injection with mac80211
 multicast.txt
 	- Behaviour of cards under Multicast
+multiqueue.txt
+	- HOWTO for multiqueue network device support.
+netconsole.txt
+	- The network console module netconsole.ko: configuration and notes.
+netdev-features.txt
+	- Network interface features API description.
 netdevices.txt
 	- info on network device driver functions exported to the kernel.
+netif-msg.txt
+	- Design of the network interface message level setting (NETIF_MSG_*).
+nfc.txt
+	- The Linux Near Field Communication (NFS) subsystem.
 olympic.txt
 	- IBM PCI Pit/Pit-Phy/Olympic Token Ring driver info.
+operstates.txt
+	- Overview of network interface operational states.
+packet_mmap.txt
+	- User guide to memory mapped packet socket rings (PACKET_[RT]X_RING).
+phonet.txt
+	- The Phonet packet protocol used in Nokia cellular modems.
+phy.txt
+	- The PHY abstraction layer.
+pktgen.txt
+	- User guide to the kernel packet generator (pktgen.ko).
 policy-routing.txt
 	- IP policy-based routing
+ppp_generic.txt
+	- Information about the generic PPP driver.
+proc_net_tcp.txt
+	- Per inode overview of the /proc/net/tcp and /proc/net/tcp6 interfaces.
+radiotap-headers.txt
+	- Background on radiotap headers.
 ray_cs.txt
 	- Raylink Wireless LAN card driver info.
+rds.txt
+	- Background on the reliable, ordered datagram delivery method RDS.
+regulatory.txt
+	- Overview of the Linux wireless regulatory infrastructure.
+rxrpc.txt
+	- Guide to the RxRPC protocol.
+s2io.txt
+	- Release notes for Neterion Xframe I/II 10GbE driver.
+scaling.txt
+	- Explanation of network scaling techniques: RSS, RPS, RFS, aRFS, XPS.
+sctp.txt
+	- Notes on the Linux kernel implementation of the SCTP protocol.
+secid.txt
+	- Explanation of the secid member in flow structures.
 skfp.txt
 	- SysKonnect FDDI (SK-5xxx, Compaq Netelligent) driver info.
 smc9.txt
 	- the driver for SMC's 9000 series of Ethernet cards
 smctr.txt
 	- SMC TokenCard TokenRing Linux driver info.
+spider-net.txt
+	- README for the Spidernet Driver (as found in PS3 / Cell BE).
+stmmac.txt
+	- README for the STMicro Synopsys Ethernet driver.
+tc-actions-env-rules.txt
+	- rules for traffic control (tc) actions.
+timestamping.txt
+	- overview of network packet timestamping variants.
 tcp.txt
 	- short blurb on how TCP output takes place.
+tcp-thin.txt
+	- kernel tuning options for low rate 'thin' TCP streams.
 tlan.txt
 	- ThunderLAN (Compaq Netelligent 10/100, Olicom OC-2xxx) driver info.
 tms380tr.txt
 	- SysKonnect Token Ring ISA/PCI adapter driver info.
+tproxy.txt
+	- Transparent proxy support user guide.
 tuntap.txt
 	- TUN/TAP device driver, allowing user space Rx/Tx of packets.
+udplite.txt
+	- UDP-Lite protocol (RFC 3828) introduction.
 vortex.txt
 	- info on using 3Com Vortex (3c590, 3c592, 3c595, 3c597) Ethernet cards.
+vxge.txt
+	- README for the Neterion X3100 PCIe Server Adapter.
 x25.txt
 	- general info on X.25 development.
 x25-iface.txt
 	- description of the X.25 Packet Layer to LAPB device interface.
+xfrm_proc.txt
+	- description of the statistics package for XFRM.
+xfrm_sync.txt
+	- sync patches for XFRM enable migration of an SA between hosts.
+xfrm_sysctl.txt
+	- description of the XFRM configuration options.
 z8530drv.txt
 	- info about Linux driver for Z8530 based HDLC cards for AX.25

Documentation/networking/ip-sysctl.txt

@@ -992,7 +992,7 @@ bindv6only - BOOLEAN
 		TRUE: disable IPv4-mapped address feature
 		FALSE: enable IPv4-mapped address feature
 
-	Default: FALSE (as specified in RFC2553bis)
+	Default: FALSE (as specified in RFC3493)
 
 IPv6 Fragmentation:
 

Documentation/networking/scaling.txt

@@ -52,7 +52,8 @@ module parameter for specifying the number of hardware queues to
 configure. In the bnx2x driver, for instance, this parameter is called
 num_queues. A typical RSS configuration would be to have one receive queue
 for each CPU if the device supports enough queues, or otherwise at least
-one for each cache domain at a particular cache level (L1, L2, etc.).
+one for each memory domain, where a memory domain is a set of CPUs that
+share a particular memory level (L1, L2, NUMA node, etc.).
 
 The indirection table of an RSS device, which resolves a queue by masked
 hash, is usually programmed by the driver at initialization. The
@@ -82,11 +83,17 @@ RSS should be enabled when latency is a concern or whenever receive
 interrupt processing forms a bottleneck. Spreading load between CPUs
 decreases queue length. For low latency networking, the optimal setting
 is to allocate as many queues as there are CPUs in the system (or the
-NIC maximum, if lower). Because the aggregate number of interrupts grows
-with each additional queue, the most efficient high-rate configuration
+NIC maximum, if lower). The most efficient high-rate configuration
 is likely the one with the smallest number of receive queues where no
-CPU that processes receive interrupts reaches 100% utilization. Per-cpu
-load can be observed using the mpstat utility.
+receive queue overflows due to a saturated CPU, because in default
+mode with interrupt coalescing enabled, the aggregate number of
+interrupts (and thus work) grows with each additional queue.
+
+Per-cpu load can be observed using the mpstat utility, but note that on
+processors with hyperthreading (HT), each hyperthread is represented as
+a separate CPU. For interrupt handling, HT has shown no benefit in
+initial tests, so limit the number of queues to the number of CPU cores
+in the system.
 
 
 RPS: Receive Packet Steering
@@ -145,7 +152,7 @@ the bitmap.
 == Suggested Configuration
 
 For a single queue device, a typical RPS configuration would be to set
-the rps_cpus to the CPUs in the same cache domain of the interrupting
+the rps_cpus to the CPUs in the same memory domain of the interrupting
 CPU. If NUMA locality is not an issue, this could also be all CPUs in
 the system. At high interrupt rate, it might be wise to exclude the
 interrupting CPU from the map since that already performs much work.
@@ -154,7 +161,7 @@ For a multi-queue system, if RSS is configured so that a hardware
 receive queue is mapped to each CPU, then RPS is probably redundant
 and unnecessary. If there are fewer hardware queues than CPUs, then
 RPS might be beneficial if the rps_cpus for each queue are the ones that
-share the same cache domain as the interrupting CPU for that queue.
+share the same memory domain as the interrupting CPU for that queue.
 
 
 RFS: Receive Flow Steering
@@ -326,7 +333,7 @@ The queue chosen for transmitting a particular flow is saved in the
 corresponding socket structure for the flow (e.g. a TCP connection).
 This transmit queue is used for subsequent packets sent on the flow to
 prevent out of order (ooo) packets. The choice also amortizes the cost
-of calling get_xps_queues() over all packets in the connection. To avoid
+of calling get_xps_queues() over all packets in the flow. To avoid
 ooo packets, the queue for a flow can subsequently only be changed if
 skb->ooo_okay is set for a packet in the flow. This flag indicates that
 there are no outstanding packets in the flow, so the transmit queue can

Documentation/power/runtime_pm.txt

@@ -431,8 +431,7 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
 
   void pm_runtime_irq_safe(struct device *dev);
     - set the power.irq_safe flag for the device, causing the runtime-PM
-      suspend and resume callbacks (but not the idle callback) to be invoked
-      with interrupts disabled
+      callbacks to be invoked with interrupts off
 
   void pm_runtime_mark_last_busy(struct device *dev);
     - set the power.last_busy field to the current time

Documentation/virtual/00-INDEX

@@ -8,3 +8,6 @@ lguest/
 	- Extremely simple hypervisor for experimental/educational use.
 uml/
 	- User Mode Linux, builds/runs Linux kernel as a userspace program.
+virtio.txt
+	- Text version of draft virtio spec.
+          See http://ozlabs.org/~rusty/virtio-spec

Documentation/virtual/lguest/lguest.c

@@ -1996,6 +1996,9 @@ int main(int argc, char *argv[])
 	/* We use a simple helper to copy the arguments separated by spaces. */
 	concat((char *)(boot + 1), argv+optind+2);
 
+	/* Set kernel alignment to 16M (CONFIG_PHYSICAL_ALIGN) */
+	boot->hdr.kernel_alignment = 0x1000000;
+
 	/* Boot protocol version: 2.07 supports the fields for lguest. */
 	boot->hdr.version = 0x207;
 

MAINTAINERS

@@ -1883,7 +1883,7 @@ S:	Maintained
 F:	drivers/connector/
 
 CONTROL GROUPS (CGROUPS)
-M:	Paul Menage <menage@google.com>
+M:	Paul Menage <paul@paulmenage.org>
 M:	Li Zefan <lizf@cn.fujitsu.com>
 L:	containers@lists.linux-foundation.org
 S:	Maintained
@@ -1932,7 +1932,7 @@ S:	Maintained
 F:	tools/power/cpupower
 
 CPUSETS
-M:	Paul Menage <menage@google.com>
+M:	Paul Menage <paul@paulmenage.org>
 W:	http://www.bullopensource.org/cpuset/
 W:	http://oss.sgi.com/projects/cpusets/
 S:	Supported
@@ -2649,11 +2649,11 @@ F:	drivers/net/wan/dlci.c
 F:	drivers/net/wan/sdla.c
 
 FRAMEBUFFER LAYER
-M:	Paul Mundt <lethal@linux-sh.org>
+M:	Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
 L:	linux-fbdev@vger.kernel.org
 W:	http://linux-fbdev.sourceforge.net/
 Q:	http://patchwork.kernel.org/project/linux-fbdev/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6.git
+T:	git git://github.com/schandinat/linux-2.6.git fbdev-next
 S:	Maintained
 F:	Documentation/fb/
 F:	Documentation/devicetree/bindings/fb/
@@ -4450,8 +4450,8 @@ M:	"David S. Miller" <davem@davemloft.net>
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net
 W:	http://patchwork.ozlabs.org/project/netdev/list/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git
 S:	Maintained
 F:	net/
 F:	include/net/
@@ -4971,7 +4971,7 @@ M:	Paul Mackerras <paulus@samba.org>
 M:	Ingo Molnar <mingo@elte.hu>
 M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 S:	Supported
-F:	kernel/perf_event*.c
+F:	kernel/events/*
 F:	include/linux/perf_event.h
 F:	arch/*/kernel/perf_event*.c
 F:	arch/*/kernel/*/perf_event*.c
@@ -5532,6 +5532,7 @@ F:	include/media/*7146*
 
 SAMSUNG AUDIO (ASoC) DRIVERS
 M:	Jassi Brar <jassisinghbrar@gmail.com>
+M:	Sangbeom Kim <sbkim73@samsung.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Supported
 F:	sound/soc/samsung
@@ -7087,7 +7088,7 @@ S:	Supported
 F:	drivers/mmc/host/vub300.c
 
 W1 DALLAS'S 1-WIRE BUS
-M:	Evgeniy Polyakov <johnpol@2ka.mipt.ru>
+M:	Evgeniy Polyakov <zbr@ioremap.net>
 S:	Maintained
 F:	Documentation/w1/
 F:	drivers/w1/

Makefile

@@ -1,8 +1,8 @@
 VERSION = 3
 PATCHLEVEL = 1
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
-NAME = Wet Seal
+EXTRAVERSION = -rc5
+NAME = "Divemaster Edition"
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"

arch/alpha/include/asm/sysinfo.h

@@ -27,13 +27,4 @@
 #define UAC_NOFIX			2
 #define UAC_SIGBUS			4
 
-
-#ifdef __KERNEL__
-
-/* This is the shift that is applied to the UAC bits as stored in the
-   per-thread flags.  See thread_info.h.  */
-#define UAC_SHIFT			6
-
-#endif
-
 #endif /* __ASM_ALPHA_SYSINFO_H */

arch/alpha/include/asm/thread_info.h

@@ -74,9 +74,9 @@ register struct thread_info *__current_thread_info __asm__("$8");
 #define TIF_NEED_RESCHED	3	/* rescheduling necessary */
 #define TIF_POLLING_NRFLAG	8	/* poll_idle is polling NEED_RESCHED */
 #define TIF_DIE_IF_KERNEL	9	/* dik recursion lock */
-#define TIF_UAC_NOPRINT		10	/* see sysinfo.h */
-#define TIF_UAC_NOFIX		11
-#define TIF_UAC_SIGBUS		12
+#define TIF_UAC_NOPRINT		10	/* ! Preserve sequence of following */
+#define TIF_UAC_NOFIX		11	/* ! flags as they match            */
+#define TIF_UAC_SIGBUS		12	/* ! userspace part of 'osf_sysinfo' */
 #define TIF_MEMDIE		13	/* is terminating due to OOM killer */
 #define TIF_RESTORE_SIGMASK	14	/* restore signal mask in do_signal */
 #define TIF_FREEZE		16	/* is freezing for suspend */
@@ -97,7 +97,7 @@ register struct thread_info *__current_thread_info __asm__("$8");
 #define _TIF_ALLWORK_MASK	(_TIF_WORK_MASK		\
 				 | _TIF_SYSCALL_TRACE)
 
-#define ALPHA_UAC_SHIFT		10
+#define ALPHA_UAC_SHIFT		TIF_UAC_NOPRINT
 #define ALPHA_UAC_MASK		(1 << TIF_UAC_NOPRINT | 1 << TIF_UAC_NOFIX | \
 				 1 << TIF_UAC_SIGBUS)
 

arch/alpha/kernel/osf_sys.c

@@ -42,6 +42,7 @@
 #include <asm/uaccess.h>
 #include <asm/system.h>
 #include <asm/sysinfo.h>
+#include <asm/thread_info.h>
 #include <asm/hwrpb.h>
 #include <asm/processor.h>
 
@@ -633,9 +634,10 @@ SYSCALL_DEFINE5(osf_getsysinfo, unsigned long, op, void __user *, buffer,
  	case GSI_UACPROC:
 		if (nbytes < sizeof(unsigned int))
 			return -EINVAL;
- 		w = (current_thread_info()->flags >> UAC_SHIFT) & UAC_BITMASK;
- 		if (put_user(w, (unsigned int __user *)buffer))
- 			return -EFAULT;
+		w = (current_thread_info()->flags >> ALPHA_UAC_SHIFT) &
+			UAC_BITMASK;
+		if (put_user(w, (unsigned int __user *)buffer))
+			return -EFAULT;
  		return 1;
 
 	case GSI_PROC_TYPE:
@@ -756,8 +758,8 @@ SYSCALL_DEFINE5(osf_setsysinfo, unsigned long, op, void __user *, buffer,
  			case SSIN_UACPROC:
 			again:
 				old = current_thread_info()->flags;
-				new = old & ~(UAC_BITMASK << UAC_SHIFT);
-				new = new | (w & UAC_BITMASK) << UAC_SHIFT;
+				new = old & ~(UAC_BITMASK << ALPHA_UAC_SHIFT);
+				new = new | (w & UAC_BITMASK) << ALPHA_UAC_SHIFT;
 				if (cmpxchg(&current_thread_info()->flags,
 					    old, new) != old)
 					goto again;

arch/alpha/kernel/systbls.S

@@ -360,7 +360,7 @@ sys_call_table:
 	.quad sys_newuname
 	.quad sys_nanosleep			/* 340 */
 	.quad sys_mremap
-	.quad sys_nfsservctl
+	.quad sys_ni_syscall			/* old nfsservctl */
 	.quad sys_setresuid
 	.quad sys_getresuid
 	.quad sys_pciconfig_read		/* 345 */

arch/arm/Kconfig

@@ -1271,6 +1271,18 @@ config ARM_ERRATA_754327
 	  This workaround defines cpu_relax() as smp_mb(), preventing correctly
 	  written polling loops from denying visibility of updates to memory.
 
+config ARM_ERRATA_364296
+	bool "ARM errata: Possible cache data corruption with hit-under-miss enabled"
+	depends on CPU_V6 && !SMP
+	help
+	  This options enables the workaround for the 364296 ARM1136
+	  r0p2 erratum (possible cache data corruption with
+	  hit-under-miss enabled). It sets the undocumented bit 31 in
+	  the auxiliary control register and the FI bit in the control
+	  register, thus disabling hit-under-miss without putting the
+	  processor into full low interrupt latency mode. ARM11MPCore
+	  is not affected.
+
 endmenu
 
 source "arch/arm/common/Kconfig"

arch/arm/boot/compressed/mmcif-sh7372.c

@@ -82,7 +82,7 @@ asmlinkage void mmc_loader(unsigned char *buf, unsigned long len)
 
 
 	/* Disable clock to MMC hardware block */
-	__raw_writel(__raw_readl(SMSTPCR3) & (1 << 12), SMSTPCR3);
+	__raw_writel(__raw_readl(SMSTPCR3) | (1 << 12), SMSTPCR3);
 
 	mmc_update_progress(MMC_PROGRESS_DONE);
 }

arch/arm/boot/compressed/sdhi-sh7372.c

@@ -85,7 +85,7 @@ asmlinkage void mmc_loader(unsigned short *buf, unsigned long len)
 		goto err;
 
         /* Disable clock to SDHI1 hardware block */
-        __raw_writel(__raw_readl(SMSTPCR3) & (1 << 13), SMSTPCR3);
+        __raw_writel(__raw_readl(SMSTPCR3) | (1 << 13), SMSTPCR3);
 
 	mmc_update_progress(MMC_PROGRESS_DONE);
 

arch/arm/include/asm/hardware/cache-l2x0.h

@@ -64,7 +64,7 @@
 #define L2X0_AUX_CTRL_MASK			0xc0000fff
 #define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT	16
 #define L2X0_AUX_CTRL_WAY_SIZE_SHIFT		17
-#define L2X0_AUX_CTRL_WAY_SIZE_MASK		(0x3 << 17)
+#define L2X0_AUX_CTRL_WAY_SIZE_MASK		(0x7 << 17)
 #define L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT	22
 #define L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT		26
 #define L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT		27

arch/arm/include/asm/pmu.h

@@ -41,7 +41,7 @@ struct arm_pmu_platdata {
  * encoded error on failure.
  */
 extern struct platform_device *
-reserve_pmu(enum arm_pmu_type device);
+reserve_pmu(enum arm_pmu_type type);
 
 /**
  * release_pmu() - Relinquish control of the performance counters
@@ -62,26 +62,26 @@ release_pmu(enum arm_pmu_type type);
  * the actual hardware initialisation.
  */
 extern int
-init_pmu(enum arm_pmu_type device);
+init_pmu(enum arm_pmu_type type);
 
 #else /* CONFIG_CPU_HAS_PMU */
 
 #include <linux/err.h>
 
 static inline struct platform_device *
-reserve_pmu(enum arm_pmu_type device)
+reserve_pmu(enum arm_pmu_type type)
 {
 	return ERR_PTR(-ENODEV);
 }
 
 static inline int
-release_pmu(struct platform_device *pdev)
+release_pmu(enum arm_pmu_type type)
 {
 	return -ENODEV;
 }
 
 static inline int
-init_pmu(enum arm_pmu_type device)
+init_pmu(enum arm_pmu_type type)
 {
 	return -ENODEV;
 }

arch/arm/kernel/calls.S

@@ -178,7 +178,7 @@
 		CALL(sys_ni_syscall)		/* vm86 */
 		CALL(sys_ni_syscall)		/* was sys_query_module */
 		CALL(sys_poll)
-		CALL(sys_nfsservctl)
+		CALL(sys_ni_syscall)		/* was nfsservctl */
 /* 170 */	CALL(sys_setresgid16)
 		CALL(sys_getresgid16)
 		CALL(sys_prctl)

arch/arm/kernel/pmu.c

@@ -31,7 +31,7 @@ static int __devinit pmu_register(struct platform_device *pdev,
 {
 	if (type < 0 || type >= ARM_NUM_PMU_DEVICES) {
 		pr_warning("received registration request for unknown "
-				"device %d\n", type);
+				"PMU device type %d\n", type);
 		return -EINVAL;
 	}
 
@@ -112,17 +112,17 @@ static int __init register_pmu_driver(void)
 device_initcall(register_pmu_driver);
 
 struct platform_device *
-reserve_pmu(enum arm_pmu_type device)
+reserve_pmu(enum arm_pmu_type type)
 {
 	struct platform_device *pdev;
 
-	if (test_and_set_bit_lock(device, &pmu_lock)) {
+	if (test_and_set_bit_lock(type, &pmu_lock)) {
 		pdev = ERR_PTR(-EBUSY);
-	} else if (pmu_devices[device] == NULL) {
-		clear_bit_unlock(device, &pmu_lock);
+	} else if (pmu_devices[type] == NULL) {
+		clear_bit_unlock(type, &pmu_lock);
 		pdev = ERR_PTR(-ENODEV);
 	} else {
-		pdev = pmu_devices[device];
+		pdev = pmu_devices[type];
 	}
 
 	return pdev;
@@ -130,11 +130,11 @@ reserve_pmu(enum arm_pmu_type device)
 EXPORT_SYMBOL_GPL(reserve_pmu);
 
 int
-release_pmu(enum arm_pmu_type device)
+release_pmu(enum arm_pmu_type type)
 {
-	if (WARN_ON(!pmu_devices[device]))
+	if (WARN_ON(!pmu_devices[type]))
 		return -EINVAL;
-	clear_bit_unlock(device, &pmu_lock);
+	clear_bit_unlock(type, &pmu_lock);
 	return 0;
 }
 EXPORT_SYMBOL_GPL(release_pmu);
@@ -182,17 +182,17 @@ init_cpu_pmu(void)
 }
 
 int
-init_pmu(enum arm_pmu_type device)
+init_pmu(enum arm_pmu_type type)
 {
 	int err = 0;
 
-	switch (device) {
+	switch (type) {
 	case ARM_PMU_DEVICE_CPU:
 		err = init_cpu_pmu();
 		break;
 	default:
-		pr_warning("attempt to initialise unknown device %d\n",
-				device);
+		pr_warning("attempt to initialise PMU of unknown "
+			   "type %d\n", type);
 		err = -EINVAL;
 	}
 

arch/arm/kernel/relocate_kernel.S

@@ -57,7 +57,8 @@ relocate_new_kernel:
 	mov r0,#0
 	ldr r1,kexec_mach_type
 	ldr r2,kexec_boot_atags
-	mov pc,lr
+ ARM(	mov pc, lr	)
+ THUMB(	bx lr		)
 
 	.align
 

arch/arm/kernel/setup.c

@@ -280,18 +280,19 @@ static void __init cacheid_init(void)
 	if (arch >= CPU_ARCH_ARMv6) {
 		if ((cachetype & (7 << 29)) == 4 << 29) {
 			/* ARMv7 register format */
+			arch = CPU_ARCH_ARMv7;
 			cacheid = CACHEID_VIPT_NONALIASING;
 			if ((cachetype & (3 << 14)) == 1 << 14)
 				cacheid |= CACHEID_ASID_TAGGED;
-			else if (cpu_has_aliasing_icache(CPU_ARCH_ARMv7))
-				cacheid |= CACHEID_VIPT_I_ALIASING;
-		} else if (cachetype & (1 << 23)) {
-			cacheid = CACHEID_VIPT_ALIASING;
 		} else {
-			cacheid = CACHEID_VIPT_NONALIASING;
-			if (cpu_has_aliasing_icache(CPU_ARCH_ARMv6))
-				cacheid |= CACHEID_VIPT_I_ALIASING;
+			arch = CPU_ARCH_ARMv6;
+			if (cachetype & (1 << 23))
+				cacheid = CACHEID_VIPT_ALIASING;
+			else
+				cacheid = CACHEID_VIPT_NONALIASING;
 		}
+		if (cpu_has_aliasing_icache(arch))
+			cacheid |= CACHEID_VIPT_I_ALIASING;
 	} else {
 		cacheid = CACHEID_VIVT;
 	}

arch/arm/kernel/smp_twd.c

@@ -137,8 +137,8 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
 	clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk);
 	clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
 
+	clockevents_register_device(clk);
+
 	/* Make sure our local interrupt controller has this enabled */
 	gic_enable_ppi(clk->irq);
-
-	clockevents_register_device(clk);
 }

arch/arm/mach-at91/at91sam9261.c

@@ -157,7 +157,7 @@ static struct clk_lookup periph_clocks_lookups[] = {
 	CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
 	CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
 	CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
-	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc1_clk),
+	CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk),
 	CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk),

arch/arm/mach-ep93xx/include/mach/ts72xx.h

@@ -6,7 +6,7 @@
  * TS72xx memory map:
  *
  * virt		phys		size
- * febff000	22000000	4K	model number register
+ * febff000	22000000	4K	model number register (bits 0-2)
  * febfe000	22400000	4K	options register
  * febfd000	22800000	4K	options register #2
  * febf9000	10800000	4K	TS-5620 RTC index register
@@ -20,6 +20,9 @@
 #define TS72XX_MODEL_TS7200		0x00
 #define TS72XX_MODEL_TS7250		0x01
 #define TS72XX_MODEL_TS7260		0x02
+#define TS72XX_MODEL_TS7300		0x03
+#define TS72XX_MODEL_TS7400		0x04
+#define TS72XX_MODEL_MASK		0x07
 
 
 #define TS72XX_OPTIONS_PHYS_BASE	0x22400000
@@ -51,19 +54,34 @@
 
 #ifndef __ASSEMBLY__
 
+static inline int ts72xx_model(void)
+{
+	return __raw_readb(TS72XX_MODEL_VIRT_BASE) & TS72XX_MODEL_MASK;
+}
+
 static inline int board_is_ts7200(void)
 {
-	return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7200;
+	return ts72xx_model() == TS72XX_MODEL_TS7200;
 }
 
 static inline int board_is_ts7250(void)
 {
-	return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7250;
+	return ts72xx_model() == TS72XX_MODEL_TS7250;
 }
 
 static inline int board_is_ts7260(void)
 {
-	return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260;
+	return ts72xx_model() == TS72XX_MODEL_TS7260;
+}
+
+static inline int board_is_ts7300(void)
+{
+	return ts72xx_model()  == TS72XX_MODEL_TS7300;
+}
+
+static inline int board_is_ts7400(void)
+{
+	return ts72xx_model() == TS72XX_MODEL_TS7400;
 }
 
 static inline int is_max197_installed(void)

arch/arm/mach-exynos4/clock.c

@@ -520,7 +520,7 @@ static struct clk init_clocks_off[] = {
 		.ctrlbit	= (1 << 21),
 	}, {
 		.name		= "ac97",
-		.id		= -1,
+		.devname	= "samsung-ac97",
 		.enable		= exynos4_clk_ip_peril_ctrl,
 		.ctrlbit	= (1 << 27),
 	}, {

arch/arm/mach-exynos4/cpu.c

@@ -24,12 +24,13 @@
 #include <plat/exynos4.h>
 #include <plat/adc-core.h>
 #include <plat/sdhci.h>
-#include <plat/devs.h>
 #include <plat/fb-core.h>
 #include <plat/fimc-core.h>
 #include <plat/iic-core.h>
+#include <plat/reset.h>
 
 #include <mach/regs-irq.h>
+#include <mach/regs-pmu.h>
 
 extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
 			 unsigned int irq_start);
@@ -128,6 +129,11 @@ static void exynos4_idle(void)
 	local_irq_enable();
 }
 
+static void exynos4_sw_reset(void)
+{
+	__raw_writel(0x1, S5P_SWRESET);
+}
+
 /*
  * exynos4_map_io
  *
@@ -241,5 +247,8 @@ int __init exynos4_init(void)
 	/* set idle function */
 	pm_idle = exynos4_idle;
 
+	/* set sw_reset function */
+	s5p_reset_hook = exynos4_sw_reset;
+
 	return sysdev_register(&exynos4_sysdev);
 }

arch/arm/mach-exynos4/include/mach/irqs.h

@@ -80,9 +80,8 @@
 #define IRQ_HSMMC3		IRQ_SPI(76)
 #define IRQ_DWMCI		IRQ_SPI(77)
 
-#define IRQ_MIPICSI0		IRQ_SPI(78)
-
-#define IRQ_MIPICSI1		IRQ_SPI(80)
+#define IRQ_MIPI_CSIS0		IRQ_SPI(78)
+#define IRQ_MIPI_CSIS1		IRQ_SPI(80)
 
 #define IRQ_ONENAND_AUDI	IRQ_SPI(82)
 #define IRQ_ROTATOR		IRQ_SPI(83)

arch/arm/mach-exynos4/include/mach/regs-pmu.h

@@ -29,6 +29,8 @@
 #define S5P_USE_STANDBY_WFE1			(1 << 25)
 #define S5P_USE_MASK				((0x3 << 16) | (0x3 << 24))
 
+#define S5P_SWRESET				S5P_PMUREG(0x0400)
+
 #define S5P_WAKEUP_STAT				S5P_PMUREG(0x0600)
 #define S5P_EINT_WAKEUP_MASK			S5P_PMUREG(0x0604)
 #define S5P_WAKEUP_MASK				S5P_PMUREG(0x0608)

arch/arm/mach-exynos4/irq-eint.c

@@ -23,6 +23,8 @@
 
 #include <mach/regs-gpio.h>
 
+#include <asm/mach/irq.h>
+
 static DEFINE_SPINLOCK(eint_lock);
 
 static unsigned int eint0_15_data[16];
@@ -184,8 +186,11 @@ static inline void exynos4_irq_demux_eint(unsigned int start)
 
 static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
 {
+	struct irq_chip *chip = irq_get_chip(irq);
+	chained_irq_enter(chip, desc);
 	exynos4_irq_demux_eint(IRQ_EINT(16));
 	exynos4_irq_demux_eint(IRQ_EINT(24));
+	chained_irq_exit(chip, desc);
 }
 
 static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
@@ -193,6 +198,7 @@ static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
 	u32 *irq_data = irq_get_handler_data(irq);
 	struct irq_chip *chip = irq_get_chip(irq);
 
+	chained_irq_enter(chip, desc);
 	chip->irq_mask(&desc->irq_data);
 
 	if (chip->irq_ack)
@@ -201,6 +207,7 @@ static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
 	generic_handle_irq(*irq_data);
 
 	chip->irq_unmask(&desc->irq_data);
+	chained_irq_exit(chip, desc);
 }
 
 int __init exynos4_init_irq_eint(void)

arch/arm/mach-exynos4/mach-universal_c210.c

@@ -79,7 +79,7 @@ static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = {
 };
 
 static struct regulator_consumer_supply max8952_consumer =
-	REGULATOR_SUPPLY("vddarm", NULL);
+	REGULATOR_SUPPLY("vdd_arm", NULL);
 
 static struct max8952_platform_data universal_max8952_pdata __initdata = {
 	.gpio_vid0	= EXYNOS4_GPX0(3),
@@ -105,7 +105,7 @@ static struct max8952_platform_data universal_max8952_pdata __initdata = {
 };
 
 static struct regulator_consumer_supply lp3974_buck1_consumer =
-	REGULATOR_SUPPLY("vddint", NULL);
+	REGULATOR_SUPPLY("vdd_int", NULL);
 
 static struct regulator_consumer_supply lp3974_buck2_consumer =
 	REGULATOR_SUPPLY("vddg3d", NULL);

arch/arm/mach-exynos4/setup-usb-phy.c

@@ -82,7 +82,7 @@ static int exynos4_usb_phy1_init(struct platform_device *pdev)
 
 	rstcon &= ~(HOST_LINK_PORT_SWRST_MASK | PHY1_SWRST_MASK);
 	writel(rstcon, EXYNOS4_RSTCON);
-	udelay(50);
+	udelay(80);
 
 	clk_disable(otg_clk);
 	clk_put(otg_clk);

arch/arm/mach-footbridge/Kconfig

@@ -62,6 +62,7 @@ config ARCH_EBSA285_HOST
 config ARCH_NETWINDER
 	bool "NetWinder"
 	select CLKSRC_I8253
+	select CLKEVT_I8253
 	select FOOTBRIDGE_HOST
 	select ISA
 	select ISA_DMA

arch/arm/mach-footbridge/dc21285.c

@@ -18,6 +18,7 @@
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/spinlock.h>
+#include <video/vga.h>
 
 #include <asm/irq.h>
 #include <asm/system.h>

arch/arm/mach-imx/mach-cpuimx27.c

@@ -310,7 +310,7 @@ static struct sys_timer eukrea_cpuimx27_timer = {
 	.init = eukrea_cpuimx27_timer_init,
 };
 
-MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
+MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27")
 	.boot_params = MX27_PHYS_OFFSET + 0x100,
 	.map_io = mx27_map_io,
 	.init_early = imx27_init_early,

arch/arm/mach-imx/mach-cpuimx35.c

@@ -192,7 +192,7 @@ struct sys_timer eukrea_cpuimx35_timer = {
 	.init	= eukrea_cpuimx35_timer_init,
 };
 
-MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35")
+MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35")
 	/* Maintainer: Eukrea Electromatique */
 	.boot_params = MX3x_PHYS_OFFSET + 0x100,
 	.map_io = mx35_map_io,

arch/arm/mach-imx/mach-eukrea_cpuimx25.c

@@ -161,7 +161,7 @@ static struct sys_timer eukrea_cpuimx25_timer = {
 	.init   = eukrea_cpuimx25_timer_init,
 };
 
-MACHINE_START(EUKREA_CPUIMX25, "Eukrea CPUIMX25")
+MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25")
 	/* Maintainer: Eukrea Electromatique */
 	.boot_params = MX25_PHYS_OFFSET + 0x100,
 	.map_io = mx25_map_io,

arch/arm/mach-orion5x/dns323-setup.c

@@ -77,7 +77,7 @@ static int __init dns323_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 	/*
 	 * Check for devices with hard-wired IRQs.
 	 */
-	irq = orion5x_pci_map_irq(const dev, slot, pin);
+	irq = orion5x_pci_map_irq(dev, slot, pin);
 	if (irq != -1)
 		return irq;
 

arch/arm/mach-orion5x/pci.c

@@ -14,6 +14,7 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/mbus.h>
+#include <video/vga.h>
 #include <asm/irq.h>
 #include <asm/mach/pci.h>
 #include <plat/pcie.h>

arch/arm/mach-realview/include/mach/system.h

@@ -44,6 +44,7 @@ static inline void arch_reset(char mode, const char *cmd)
 	 */
 	if (realview_reset)
 		realview_reset(mode);
+	dsb();
 }
 
 #endif

arch/arm/mach-s3c64xx/pm.c

@@ -16,6 +16,7 @@
 #include <linux/suspend.h>
 #include <linux/serial_core.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
 
 #include <mach/map.h>
 #include <mach/irqs.h>

arch/arm/mach-s5p64x0/irq-eint.c

@@ -129,7 +129,7 @@ static int s5p64x0_alloc_gc(void)
 	}
 
 	ct = gc->chip_types;
-	ct->chip.irq_ack = irq_gc_ack;
+	ct->chip.irq_ack = irq_gc_ack_set_bit;
 	ct->chip.irq_mask = irq_gc_mask_set_bit;
 	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
 	ct->chip.irq_set_type = s5p64x0_irq_eint_set_type;

arch/arm/mach-s5pv210/pm.c

@@ -88,7 +88,7 @@ static struct sleep_save s5pv210_core_save[] = {
 	SAVE_ITEM(S3C2410_TCNTO(0)),
 };
 
-void s5pv210_cpu_suspend(unsigned long arg)
+static int s5pv210_cpu_suspend(unsigned long arg)
 {
 	unsigned long tmp;
 

arch/arm/mach-shmobile/board-ag5evm.c

@@ -341,6 +341,7 @@ static struct platform_device mipidsi0_device = {
 static struct sh_mobile_sdhi_info sdhi0_info = {
 	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
 	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
 	.tmio_ocr_mask	= MMC_VDD_27_28 | MMC_VDD_28_29,
 };
@@ -382,7 +383,7 @@ void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
 }
 
 static struct sh_mobile_sdhi_info sh_sdhi1_info = {
-	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE,
+	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
 	.tmio_caps	= MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
 	.tmio_ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
 	.set_pwr	= ag5evm_sdhi1_set_pwr,

arch/arm/mach-shmobile/board-ap4evb.c

@@ -1412,6 +1412,7 @@ static void __init ap4evb_init(void)
 	fsi_init_pm_clock();
 	sh7372_pm_init();
 	pm_clk_add(&fsi_device.dev, "spu2");
+	pm_clk_add(&lcdc1_device.dev, "hdmi");
 }
 
 static void __init ap4evb_timer_init(void)

arch/arm/mach-shmobile/board-mackerel.c

@@ -641,6 +641,8 @@ static struct usbhs_private usbhs0_private = {
 		},
 		.driver_param = {
 			.buswait_bwait	= 4,
+			.d0_tx_id	= SHDMA_SLAVE_USB0_TX,
+			.d1_rx_id	= SHDMA_SLAVE_USB0_RX,
 		},
 	},
 };
@@ -810,6 +812,8 @@ static struct usbhs_private usbhs1_private = {
 			.buswait_bwait	= 4,
 			.pipe_type	= usbhs1_pipe_cfg,
 			.pipe_size	= ARRAY_SIZE(usbhs1_pipe_cfg),
+			.d0_tx_id	= SHDMA_SLAVE_USB1_TX,
+			.d1_rx_id	= SHDMA_SLAVE_USB1_RX,
 		},
 	},
 };
@@ -1588,6 +1592,7 @@ static void __init mackerel_init(void)
 	hdmi_init_pm_clock();
 	sh7372_pm_init();
 	pm_clk_add(&fsi_device.dev, "spu2");
+	pm_clk_add(&hdmi_lcdc_device.dev, "hdmi");
 }
 
 static void __init mackerel_timer_init(void)

arch/arm/mach-shmobile/clock-sh7372.c

@@ -503,16 +503,17 @@ static struct clk *late_main_clks[] = {
 	&sh7372_fsidivb_clk,
 };
 
-enum { MSTP001,
+enum { MSTP001, MSTP000,
        MSTP131, MSTP130,
        MSTP129, MSTP128, MSTP127, MSTP126, MSTP125,
        MSTP118, MSTP117, MSTP116, MSTP113,
        MSTP106, MSTP101, MSTP100,
        MSTP223,
-       MSTP218, MSTP217, MSTP216,
-       MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
-       MSTP329, MSTP328, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312,
-       MSTP423, MSTP415, MSTP413, MSTP411, MSTP410, MSTP406, MSTP403,
+       MSTP218, MSTP217, MSTP216, MSTP214, MSTP208, MSTP207,
+       MSTP206, MSTP205, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
+       MSTP328, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312,
+       MSTP423, MSTP415, MSTP413, MSTP411, MSTP410, MSTP407, MSTP406,
+       MSTP405, MSTP404, MSTP403, MSTP400,
        MSTP_NR };
 
 #define MSTP(_parent, _reg, _bit, _flags) \
@@ -520,6 +521,7 @@ enum { MSTP001,
 
 static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP001] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 1, 0), /* IIC2 */
+	[MSTP000] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 0, 0), /* MSIOF0 */
 	[MSTP131] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 31, 0), /* VEU3 */
 	[MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */
 	[MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */
@@ -538,14 +540,16 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* DMAC1 */
 	[MSTP217] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 17, 0), /* DMAC2 */
 	[MSTP216] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 16, 0), /* DMAC3 */
+	[MSTP214] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 14, 0), /* USBDMAC */
+	[MSTP208] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 8, 0), /* MSIOF1 */
 	[MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
 	[MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
+	[MSTP205] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 5, 0), /* MSIOF2 */
 	[MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
 	[MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */
 	[MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */
 	[MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */
 	[MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */
-	[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
 	[MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSI2 */
 	[MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */
 	[MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */
@@ -557,8 +561,12 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP413] = MSTP(&pllc1_div2_clk, SMSTPCR4, 13, 0), /* HDMI */
 	[MSTP411] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 11, 0), /* IIC3 */
 	[MSTP410] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 10, 0), /* IIC4 */
+	[MSTP407] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 7, 0), /* USB-DMAC1 */
 	[MSTP406] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 6, 0), /* USB1 */
+	[MSTP405] = MSTP(&r_clk, SMSTPCR4, 5, 0), /* CMT4 */
+	[MSTP404] = MSTP(&r_clk, SMSTPCR4, 4, 0), /* CMT3 */
 	[MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */
+	[MSTP400] = MSTP(&r_clk, SMSTPCR4, 0, 0), /* CMT2 */
 };
 
 static struct clk_lookup lookups[] = {
@@ -609,6 +617,7 @@ static struct clk_lookup lookups[] = {
 
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */
+	CLKDEV_DEV_ID("spi_sh_msiof.0", &mstp_clks[MSTP000]), /* MSIOF0 */
 	CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[MSTP131]), /* VEU3 */
 	CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */
 	CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */
@@ -629,14 +638,16 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* DMAC1 */
 	CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]), /* DMAC2 */
 	CLKDEV_DEV_ID("sh-dma-engine.2", &mstp_clks[MSTP216]), /* DMAC3 */
+	CLKDEV_DEV_ID("sh-dma-engine.3", &mstp_clks[MSTP214]), /* USB-DMAC0 */
+	CLKDEV_DEV_ID("spi_sh_msiof.1", &mstp_clks[MSTP208]), /* MSIOF1 */
 	CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
 	CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP206]), /* SCIFB */
+	CLKDEV_DEV_ID("spi_sh_msiof.2", &mstp_clks[MSTP205]), /* MSIOF2 */
 	CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
 	CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
 	CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */
 	CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */
 	CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */
-	CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
 	CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */
 	CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */
@@ -650,11 +661,17 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-mobile-hdmi", &mstp_clks[MSTP413]), /* HDMI */
 	CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* IIC3 */
 	CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* IIC4 */
+	CLKDEV_DEV_ID("sh-dma-engine.4", &mstp_clks[MSTP407]), /* USB-DMAC1 */
 	CLKDEV_DEV_ID("r8a66597_hcd.1", &mstp_clks[MSTP406]), /* USB1 */
 	CLKDEV_DEV_ID("r8a66597_udc.1", &mstp_clks[MSTP406]), /* USB1 */
 	CLKDEV_DEV_ID("renesas_usbhs.1", &mstp_clks[MSTP406]), /* USB1 */
+	CLKDEV_DEV_ID("sh_cmt.4", &mstp_clks[MSTP405]), /* CMT4 */
+	CLKDEV_DEV_ID("sh_cmt.3", &mstp_clks[MSTP404]), /* CMT3 */
 	CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */
+	CLKDEV_DEV_ID("sh_cmt.2", &mstp_clks[MSTP400]), /* CMT2 */
 
+	CLKDEV_ICK_ID("hdmi", "sh_mobile_lcdc_fb.1",
+		      &div6_reparent_clks[DIV6_HDMI]),
 	CLKDEV_ICK_ID("ick", "sh-mobile-hdmi", &div6_reparent_clks[DIV6_HDMI]),
 	CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]),
 	CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]),

arch/arm/mach-shmobile/clock-sh73a0.c

@@ -365,7 +365,7 @@ void __init sh73a0_clock_init(void)
 	__raw_writel(0x108, SD2CKCR);
 
 	/* detect main clock parent */
-	switch ((__raw_readl(CKSCR) >> 24) & 0x03) {
+	switch ((__raw_readl(CKSCR) >> 28) & 0x03) {
 	case 0:
 		main_clk.parent = &sh73a0_extal1_clk;
 		break;

arch/arm/mach-shmobile/include/mach/sh7372.h

@@ -459,6 +459,10 @@ enum {
 	SHDMA_SLAVE_SDHI2_TX,
 	SHDMA_SLAVE_MMCIF_RX,
 	SHDMA_SLAVE_MMCIF_TX,
+	SHDMA_SLAVE_USB0_TX,
+	SHDMA_SLAVE_USB0_RX,
+	SHDMA_SLAVE_USB1_TX,
+	SHDMA_SLAVE_USB1_RX,
 };
 
 extern struct clk sh7372_extal1_clk;

arch/arm/mach-shmobile/intc-sh7372.c

@@ -379,7 +379,7 @@ enum {
 	/* BBIF2 */
 	VPU,
 	TSIF1,
-	_3DG_SGX530,
+	/* 3DG */
 	_2DDMAC,
 	IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2,
 	IPMMU_IPMMUR, IPMMU_IPMMUR2,
@@ -436,7 +436,7 @@ static struct intc_vect intcs_vectors[] = {
 	/* BBIF2 */
 	INTCS_VECT(VPU, 0x980),
 	INTCS_VECT(TSIF1, 0x9a0),
-	INTCS_VECT(_3DG_SGX530, 0x9e0),
+	/* 3DG */
 	INTCS_VECT(_2DDMAC, 0xa00),
 	INTCS_VECT(IIC2_ALI2, 0xa80), INTCS_VECT(IIC2_TACKI2, 0xaa0),
 	INTCS_VECT(IIC2_WAITI2, 0xac0), INTCS_VECT(IIC2_DTEI2, 0xae0),
@@ -521,7 +521,7 @@ static struct intc_mask_reg intcs_mask_registers[] = {
 	    RTDMAC_1_DEI3, RTDMAC_1_DEI2, RTDMAC_1_DEI1, RTDMAC_1_DEI0 } },
 	{ 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */
 	  { 0, 0, MSIOF, 0,
-	    _3DG_SGX530, 0, 0, 0 } },
+	    0, 0, 0, 0 } },
 	{ 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */
 	  { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0,
 	    0, 0, 0, 0 } },
@@ -561,7 +561,6 @@ static struct intc_prio_reg intcs_prio_registers[] = {
 					      TMU_TUNI2, TSIF1 } },
 	{ 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, 0, VEU, BEU } },
 	{ 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF0, IIC0 } },
-	{ 0xffd20024, 0, 16, 4, /* IPRJS */ { 0, _3DG_SGX530, 0, 0 } },
 	{ 0xffd20028, 0, 16, 4, /* IPRKS */ { 0, 0, LMB, 0 } },
 	{ 0xffd2002c, 0, 16, 4, /* IPRLS */ { IPMMU, 0, 0, 0 } },
 	{ 0xffd20030, 0, 16, 4, /* IPRMS */ { IIC2, 0, 0, 0 } },

arch/arm/mach-shmobile/setup-sh7372.c

@@ -169,35 +169,35 @@ static struct platform_device scif6_device = {
 };
 
 /* CMT */
-static struct sh_timer_config cmt10_platform_data = {
-	.name = "CMT10",
-	.channel_offset = 0x10,
-	.timer_bit = 0,
+static struct sh_timer_config cmt2_platform_data = {
+	.name = "CMT2",
+	.channel_offset = 0x40,
+	.timer_bit = 5,
 	.clockevent_rating = 125,
 	.clocksource_rating = 125,
 };
 
-static struct resource cmt10_resources[] = {
+static struct resource cmt2_resources[] = {
 	[0] = {
-		.name	= "CMT10",
-		.start	= 0xe6138010,
-		.end	= 0xe613801b,
+		.name	= "CMT2",
+		.start	= 0xe6130040,
+		.end	= 0xe613004b,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= evt2irq(0x0b00), /* CMT1_CMT10 */
+		.start	= evt2irq(0x0b80), /* CMT2 */
 		.flags	= IORESOURCE_IRQ,
 	},
 };
 
-static struct platform_device cmt10_device = {
+static struct platform_device cmt2_device = {
 	.name		= "sh_cmt",
-	.id		= 10,
+	.id		= 2,
 	.dev = {
-		.platform_data	= &cmt10_platform_data,
+		.platform_data	= &cmt2_platform_data,
 	},
-	.resource	= cmt10_resources,
-	.num_resources	= ARRAY_SIZE(cmt10_resources),
+	.resource	= cmt2_resources,
+	.num_resources	= ARRAY_SIZE(cmt2_resources),
 };
 
 /* TMU */
@@ -602,6 +602,150 @@ static struct platform_device dma2_device = {
 	},
 };
 
+/*
+ * USB-DMAC
+ */
+
+unsigned int usbts_shift[] = {3, 4, 5};
+
+enum {
+	XMIT_SZ_8BYTE		= 0,
+	XMIT_SZ_16BYTE		= 1,
+	XMIT_SZ_32BYTE		= 2,
+};
+
+#define USBTS_INDEX2VAL(i) (((i) & 3) << 6)
+
+static const struct sh_dmae_channel sh7372_usb_dmae_channels[] = {
+	{
+		.offset = 0,
+	}, {
+		.offset = 0x20,
+	},
+};
+
+/* USB DMAC0 */
+static const struct sh_dmae_slave_config sh7372_usb_dmae0_slaves[] = {
+	{
+		.slave_id	= SHDMA_SLAVE_USB0_TX,
+		.chcr		= USBTS_INDEX2VAL(XMIT_SZ_8BYTE),
+	}, {
+		.slave_id	= SHDMA_SLAVE_USB0_RX,
+		.chcr		= USBTS_INDEX2VAL(XMIT_SZ_8BYTE),
+	},
+};
+
+static struct sh_dmae_pdata usb_dma0_platform_data = {
+	.slave		= sh7372_usb_dmae0_slaves,
+	.slave_num	= ARRAY_SIZE(sh7372_usb_dmae0_slaves),
+	.channel	= sh7372_usb_dmae_channels,
+	.channel_num	= ARRAY_SIZE(sh7372_usb_dmae_channels),
+	.ts_low_shift	= 6,
+	.ts_low_mask	= 0xc0,
+	.ts_high_shift	= 0,
+	.ts_high_mask	= 0,
+	.ts_shift	= usbts_shift,
+	.ts_shift_num	= ARRAY_SIZE(usbts_shift),
+	.dmaor_init	= DMAOR_DME,
+	.chcr_offset	= 0x14,
+	.chcr_ie_bit	= 1 << 5,
+	.dmaor_is_32bit	= 1,
+	.needs_tend_set	= 1,
+	.no_dmars	= 1,
+};
+
+static struct resource sh7372_usb_dmae0_resources[] = {
+	{
+		/* Channel registers and DMAOR */
+		.start	= 0xe68a0020,
+		.end	= 0xe68a0064 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		/* VCR/SWR/DMICR */
+		.start	= 0xe68a0000,
+		.end	= 0xe68a0014 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		/* IRQ for channels */
+		.start	= evt2irq(0x0a00),
+		.end	= evt2irq(0x0a00),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usb_dma0_device = {
+	.name		= "sh-dma-engine",
+	.id		= 3,
+	.resource	= sh7372_usb_dmae0_resources,
+	.num_resources	= ARRAY_SIZE(sh7372_usb_dmae0_resources),
+	.dev		= {
+		.platform_data	= &usb_dma0_platform_data,
+	},
+};
+
+/* USB DMAC1 */
+static const struct sh_dmae_slave_config sh7372_usb_dmae1_slaves[] = {
+	{
+		.slave_id	= SHDMA_SLAVE_USB1_TX,
+		.chcr		= USBTS_INDEX2VAL(XMIT_SZ_8BYTE),
+	}, {
+		.slave_id	= SHDMA_SLAVE_USB1_RX,
+		.chcr		= USBTS_INDEX2VAL(XMIT_SZ_8BYTE),
+	},
+};
+
+static struct sh_dmae_pdata usb_dma1_platform_data = {
+	.slave		= sh7372_usb_dmae1_slaves,
+	.slave_num	= ARRAY_SIZE(sh7372_usb_dmae1_slaves),
+	.channel	= sh7372_usb_dmae_channels,
+	.channel_num	= ARRAY_SIZE(sh7372_usb_dmae_channels),
+	.ts_low_shift	= 6,
+	.ts_low_mask	= 0xc0,
+	.ts_high_shift	= 0,
+	.ts_high_mask	= 0,
+	.ts_shift	= usbts_shift,
+	.ts_shift_num	= ARRAY_SIZE(usbts_shift),
+	.dmaor_init	= DMAOR_DME,
+	.chcr_offset	= 0x14,
+	.chcr_ie_bit	= 1 << 5,
+	.dmaor_is_32bit	= 1,
+	.needs_tend_set	= 1,
+	.no_dmars	= 1,
+};
+
+static struct resource sh7372_usb_dmae1_resources[] = {
+	{
+		/* Channel registers and DMAOR */
+		.start	= 0xe68c0020,
+		.end	= 0xe68c0064 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		/* VCR/SWR/DMICR */
+		.start	= 0xe68c0000,
+		.end	= 0xe68c0014 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		/* IRQ for channels */
+		.start	= evt2irq(0x1d00),
+		.end	= evt2irq(0x1d00),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usb_dma1_device = {
+	.name		= "sh-dma-engine",
+	.id		= 4,
+	.resource	= sh7372_usb_dmae1_resources,
+	.num_resources	= ARRAY_SIZE(sh7372_usb_dmae1_resources),
+	.dev		= {
+		.platform_data	= &usb_dma1_platform_data,
+	},
+};
+
 /* VPU */
 static struct uio_info vpu_platform_data = {
 	.name = "VPU5HG",
@@ -818,7 +962,7 @@ static struct platform_device *sh7372_early_devices[] __initdata = {
 	&scif4_device,
 	&scif5_device,
 	&scif6_device,
-	&cmt10_device,
+	&cmt2_device,
 	&tmu00_device,
 	&tmu01_device,
 };
@@ -829,6 +973,8 @@ static struct platform_device *sh7372_late_devices[] __initdata = {
 	&dma0_device,
 	&dma1_device,
 	&dma2_device,
+	&usb_dma0_device,
+	&usb_dma1_device,
 	&vpu_device,
 	&veu0_device,
 	&veu1_device,

arch/arm/mach-vexpress/v2m.c

@@ -318,6 +318,10 @@ static struct clk v2m_sp804_clk = {
 	.rate	= 1000000,
 };
 
+static struct clk v2m_ref_clk = {
+	.rate   = 32768,
+};
+
 static struct clk dummy_apb_pclk;
 
 static struct clk_lookup v2m_lookups[] = {
@@ -348,6 +352,9 @@ static struct clk_lookup v2m_lookups[] = {
 	}, {	/* CLCD */
 		.dev_id		= "mb:clcd",
 		.clk		= &osc1_clk,
+	}, {	/* SP805 WDT */
+		.dev_id		= "mb:wdt",
+		.clk		= &v2m_ref_clk,
 	}, {	/* SP804 timers */
 		.dev_id		= "sp804",
 		.con_id		= "v2m-timer0",

arch/arm/mm/proc-arm920.S

@@ -379,7 +379,7 @@ ENTRY(cpu_arm920_set_pte_ext)
 
 /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
 .globl	cpu_arm920_suspend_size
-.equ	cpu_arm920_suspend_size, 4 * 3
+.equ	cpu_arm920_suspend_size, 4 * 4
 #ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_arm920_do_suspend)
 	stmfd	sp!, {r4 - r7, lr}

arch/arm/mm/proc-arm926.S

@@ -394,7 +394,7 @@ ENTRY(cpu_arm926_set_pte_ext)
 
 /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */
 .globl	cpu_arm926_suspend_size
-.equ	cpu_arm926_suspend_size, 4 * 3
+.equ	cpu_arm926_suspend_size, 4 * 4
 #ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_arm926_do_suspend)
 	stmfd	sp!, {r4 - r7, lr}

arch/arm/mm/proc-sa1100.S

@@ -182,11 +182,11 @@ ENDPROC(cpu_sa1100_do_suspend)
 
 ENTRY(cpu_sa1100_do_resume)
 	ldmia	r0, {r4 - r7}			@ load cp regs
-	mov	r1, #0
-	mcr	p15, 0, r1, c8, c7, 0		@ flush I+D TLBs
-	mcr	p15, 0, r1, c7, c7, 0		@ flush I&D cache
-	mcr	p15, 0, r1, c9, c0, 0		@ invalidate RB
-	mcr	p15, 0, r1, c9, c0, 5		@ allow user space to use RB
+	mov	ip, #0
+	mcr	p15, 0, ip, c8, c7, 0		@ flush I+D TLBs
+	mcr	p15, 0, ip, c7, c7, 0		@ flush I&D cache
+	mcr	p15, 0, ip, c9, c0, 0		@ invalidate RB
+	mcr	p15, 0, ip, c9, c0, 5		@ allow user space to use RB
 
 	mcr	p15, 0, r4, c3, c0, 0		@ domain ID
 	mcr	p15, 0, r5, c2, c0, 0		@ translation table base addr

arch/arm/mm/proc-v6.S

@@ -223,6 +223,22 @@ __v6_setup:
 	mrc	p15, 0, r0, c1, c0, 0		@ read control register
 	bic	r0, r0, r5			@ clear bits them
 	orr	r0, r0, r6			@ set them
+#ifdef CONFIG_ARM_ERRATA_364296
+	/*
+	 * Workaround for the 364296 ARM1136 r0p2 erratum (possible cache data
+	 * corruption with hit-under-miss enabled). The conditional code below
+	 * (setting the undocumented bit 31 in the auxiliary control register
+	 * and the FI bit in the control register) disables hit-under-miss
+	 * without putting the processor into full low interrupt latency mode.
+	 */
+	ldr	r6, =0x4107b362			@ id for ARM1136 r0p2
+	mrc	p15, 0, r5, c0, c0, 0		@ get processor id
+	teq	r5, r6				@ check for the faulty core
+	mrceq	p15, 0, r5, c1, c0, 1		@ load aux control reg
+	orreq	r5, r5, #(1 << 31)		@ set the undocumented bit 31
+	mcreq	p15, 0, r5, c1, c0, 1		@ write aux control reg
+	orreq	r0, r0, #(1 << 21)		@ low interrupt latency configuration
+#endif
 	mov	pc, lr				@ return to head.S:__ret
 
 	/*

arch/arm/mm/proc-v7.S

@@ -66,6 +66,7 @@ ENDPROC(cpu_v7_proc_fin)
 ENTRY(cpu_v7_reset)
 	mrc	p15, 0, r1, c1, c0, 0		@ ctrl register
 	bic	r1, r1, #0x1			@ ...............m
+ THUMB(	bic	r1, r1, #1 << 30 )		@ SCTLR.TE (Thumb exceptions)
 	mcr	p15, 0, r1, c1, c0, 0		@ disable MMU
 	isb
 	mov	pc, r0
@@ -247,13 +248,16 @@ ENTRY(cpu_v7_do_resume)
 	mcr	p15, 0, r7, c2, c0, 0	@ TTB 0
 	mcr	p15, 0, r8, c2, c0, 1	@ TTB 1
 	mcr	p15, 0, ip, c2, c0, 2	@ TTB control register
-	mcr	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
+	mrc	p15, 0, r4, c1, c0, 1	@ Read Auxiliary control register
+	teq	r4, r10			@ Is it already set?
+	mcrne	p15, 0, r10, c1, c0, 1	@ No, so write it
 	mcr	p15, 0, r11, c1, c0, 2	@ Co-processor access control
 	ldr	r4, =PRRR		@ PRRR
 	ldr	r5, =NMRR		@ NMRR
 	mcr	p15, 0, r4, c10, c2, 0	@ write PRRR
 	mcr	p15, 0, r5, c10, c2, 1	@ write NMRR
 	isb
+	dsb
 	mov	r0, r9			@ control register
 	mov	r2, r7, lsr #14		@ get TTB0 base
 	mov	r2, r2, lsl #14

arch/arm/mm/proc-xsc3.S

@@ -406,7 +406,7 @@ ENTRY(cpu_xsc3_set_pte_ext)
 	.align
 
 .globl	cpu_xsc3_suspend_size
-.equ	cpu_xsc3_suspend_size, 4 * 8
+.equ	cpu_xsc3_suspend_size, 4 * 7
 #ifdef CONFIG_PM_SLEEP
 ENTRY(cpu_xsc3_do_suspend)
 	stmfd	sp!, {r4 - r10, lr}
@@ -418,12 +418,12 @@ ENTRY(cpu_xsc3_do_suspend)
 	mrc	p15, 0, r9, c1, c0, 1	@ auxiliary control reg
 	mrc 	p15, 0, r10, c1, c0, 0	@ control reg
 	bic	r4, r4, #2		@ clear frequency change bit
-	stmia	r0, {r1, r4 - r10}	@ store v:p offset + cp regs
+	stmia	r0, {r4 - r10}		@ store cp regs
 	ldmia	sp!, {r4 - r10, pc}
 ENDPROC(cpu_xsc3_do_suspend)
 
 ENTRY(cpu_xsc3_do_resume)
-	ldmia	r0, {r1, r4 - r10}	@ load v:p offset + cp regs
+	ldmia	r0, {r4 - r10}		@ load cp regs
 	mov	ip, #0
 	mcr	p15, 0, ip, c7, c7, 0	@ invalidate I & D caches, BTB
 	mcr	p15, 0, ip, c7, c10, 4	@ drain write (&fill) buffer

arch/arm/plat-omap/omap_device.c

@@ -622,7 +622,8 @@ static struct dev_pm_domain omap_device_pm_domain = {
 		SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume,
 				   _od_runtime_idle)
 		USE_PLATFORM_PM_SLEEP_OPS
-		SET_SYSTEM_SLEEP_PM_OPS(_od_suspend_noirq, _od_resume_noirq)
+		.suspend_noirq = _od_suspend_noirq,
+		.resume_noirq = _od_resume_noirq,
 	}
 };
 

arch/arm/plat-s5p/clock.c

@@ -192,7 +192,7 @@ unsigned long s5p_spdif_get_rate(struct clk *clk)
 	if (IS_ERR(pclk))
 		return -EINVAL;
 
-	rate = pclk->ops->get_rate(clk);
+	rate = pclk->ops->get_rate(pclk);
 	clk_put(pclk);
 
 	return rate;

arch/arm/plat-s5p/irq-gpioint.c

@@ -23,6 +23,8 @@
 #include <plat/gpio-core.h>
 #include <plat/gpio-cfg.h>
 
+#include <asm/mach/irq.h>
+
 #define GPIO_BASE(chip)		(((unsigned long)(chip)->base) & 0xFFFFF000u)
 
 #define CON_OFFSET		0x700
@@ -81,6 +83,9 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc)
 	int group, pend_offset, mask_offset;
 	unsigned int pend, mask;
 
+	struct irq_chip *chip = irq_get_chip(irq);
+	chained_irq_enter(chip, desc);
+
 	for (group = 0; group < bank->nr_groups; group++) {
 		struct s3c_gpio_chip *chip = bank->chips[group];
 		if (!chip)
@@ -102,6 +107,7 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc)
 			pend &= ~BIT(offset);
 		}
 	}
+	chained_irq_exit(chip, desc);
 }
 
 static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip)

arch/arm/plat-samsung/include/plat/backlight.h

@@ -20,7 +20,7 @@ struct samsung_bl_gpio_info {
 	int func;
 };
 
-extern void samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
+extern void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
 	struct platform_pwm_backlight_data *bl_data);
 
 #endif /* __ASM_PLAT_BACKLIGHT_H */

arch/arm/plat-samsung/irq-vic-timer.c

@@ -22,9 +22,14 @@
 #include <plat/irq-vic-timer.h>
 #include <plat/regs-timer.h>
 
+#include <asm/mach/irq.h>
+
 static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc)
 {
+	struct irq_chip *chip = irq_get_chip(irq);
+	chained_irq_enter(chip, desc);
 	generic_handle_irq((int)desc->irq_data.handler_data);
+	chained_irq_exit(chip, desc);
 }
 
 /* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */

arch/arm/tools/mach-types

@@ -351,7 +351,7 @@ centro			MACH_CENTRO		CENTRO			1944
 nokia_rx51		MACH_NOKIA_RX51		NOKIA_RX51		1955
 omap_zoom2		MACH_OMAP_ZOOM2		OMAP_ZOOM2		1967
 cpuat9260		MACH_CPUAT9260		CPUAT9260		1973
-eukrea_cpuimx27		MACH_CPUIMX27		CPUIMX27		1975
+eukrea_cpuimx27		MACH_EUKREA_CPUIMX27	EUKREA_CPUIMX27		1975
 acs5k			MACH_ACS5K		ACS5K			1982
 snapper_9260		MACH_SNAPPER_9260	SNAPPER_9260		1987
 dsm320			MACH_DSM320		DSM320			1988
@@ -476,8 +476,8 @@ cns3420vb		MACH_CNS3420VB		CNS3420VB		2776
 omap4_panda		MACH_OMAP4_PANDA	OMAP4_PANDA		2791
 ti8168evm		MACH_TI8168EVM		TI8168EVM		2800
 teton_bga		MACH_TETON_BGA		TETON_BGA		2816
-eukrea_cpuimx25sd	MACH_EUKREA_CPUIMX25	EUKREA_CPUIMX25		2820
-eukrea_cpuimx35sd	MACH_EUKREA_CPUIMX35	EUKREA_CPUIMX35		2821
+eukrea_cpuimx25sd	MACH_EUKREA_CPUIMX25SD	EUKREA_CPUIMX25SD	2820
+eukrea_cpuimx35sd	MACH_EUKREA_CPUIMX35SD	EUKREA_CPUIMX35SD	2821
 eukrea_cpuimx51sd	MACH_EUKREA_CPUIMX51SD	EUKREA_CPUIMX51SD	2822
 eukrea_cpuimx51		MACH_EUKREA_CPUIMX51	EUKREA_CPUIMX51		2823
 smdkc210		MACH_SMDKC210		SMDKC210		2838

arch/avr32/kernel/syscall_table.S

@@ -158,7 +158,7 @@ sys_call_table:
 	.long	sys_sched_rr_get_interval
 	.long	sys_nanosleep
 	.long	sys_poll
-	.long	sys_nfsservctl		/* 145 */
+	.long	sys_ni_syscall		/* 145 was nfsservctl */
 	.long	sys_setresgid
 	.long	sys_getresgid
 	.long	sys_prctl

arch/blackfin/mach-common/entry.S

@@ -1543,7 +1543,7 @@ ENTRY(_sys_call_table)
 	.long _sys_ni_syscall	/* for vm86 */
 	.long _sys_ni_syscall	/* old "query_module" */
 	.long _sys_ni_syscall	/* sys_poll */
-	.long _sys_nfsservctl
+	.long _sys_ni_syscall   /* old nfsservctl */
 	.long _sys_setresgid	/* setresgid16 */	/* 170 */
 	.long _sys_getresgid	/* getresgid16 */
 	.long _sys_prctl

arch/cris/arch-v10/kernel/entry.S

@@ -771,7 +771,7 @@ sys_call_table:
 	.long sys_ni_syscall	/* sys_vm86 */
 	.long sys_ni_syscall	/* Old sys_query_module */
 	.long sys_poll
-	.long sys_nfsservctl
+	.long sys_ni_syscall    /* old nfsservctl */
 	.long sys_setresgid16	/* 170 */
 	.long sys_getresgid16
 	.long sys_prctl

arch/cris/arch-v32/kernel/entry.S

@@ -714,7 +714,7 @@ sys_call_table:
 	.long sys_ni_syscall	/* sys_vm86 */
 	.long sys_ni_syscall	/* Old sys_query_module */
 	.long sys_poll
-	.long sys_nfsservctl
+	.long sys_ni_syscall	/* Old nfsservctl */
 	.long sys_setresgid16	/* 170 */
 	.long sys_getresgid16
 	.long sys_prctl

arch/cris/include/asm/serial.h

@@ -0,0 +1,9 @@
+#ifndef _ASM_SERIAL_H
+#define _ASM_SERIAL_H
+
+/*
+ * This assumes you have a 1.8432 MHz clock for your UART.
+ */
+#define BASE_BAUD (1843200 / 16)
+
+#endif /* _ASM_SERIAL_H */

arch/frv/kernel/entry.S

@@ -1358,7 +1358,7 @@ sys_call_table:
 	.long sys_ni_syscall	/* for vm86 */
 	.long sys_ni_syscall	/* Old sys_query_module */
 	.long sys_poll
-	.long sys_nfsservctl
+	.long sys_ni_syscall	/* Old nfsservctl */
 	.long sys_setresgid16	/* 170 */
 	.long sys_getresgid16
 	.long sys_prctl

arch/h8300/kernel/syscalls.S

@@ -183,7 +183,7 @@ SYMBOL_NAME_LABEL(sys_call_table)
 	.long SYMBOL_NAME(sys_ni_syscall)	/* for vm86 */
 	.long SYMBOL_NAME(sys_ni_syscall)	/* sys_query_module */
 	.long SYMBOL_NAME(sys_poll)
-	.long SYMBOL_NAME(sys_nfsservctl)
+	.long SYMBOL_NAME(sys_ni_syscall)	/* old nfsservctl */
 	.long SYMBOL_NAME(sys_setresgid16)	/* 170 */
 	.long SYMBOL_NAME(sys_getresgid16)
 	.long SYMBOL_NAME(sys_prctl)

arch/ia64/Kconfig

@@ -162,7 +162,6 @@ config IA64_GENERIC
 	select ACPI_NUMA
 	select SWIOTLB
 	select PCI_MSI
-	select DMAR
 	help
 	  This selects the system type of your hardware.  A "generic" kernel
 	  will run on any supported IA-64 system.  However, if you configure

arch/ia64/configs/generic_defconfig

@@ -234,3 +234,4 @@ CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRC_T10DIF=y
 CONFIG_MISC_DEVICES=y
+CONFIG_DMAR=y

arch/ia64/kernel/entry.S

@@ -1614,7 +1614,7 @@ sys_call_table:
 	data8 sys_sched_get_priority_min
 	data8 sys_sched_rr_get_interval
 	data8 sys_nanosleep
-	data8 sys_nfsservctl
+	data8 sys_ni_syscall			// old nfsservctl
 	data8 sys_prctl				// 1170
 	data8 sys_getpagesize
 	data8 sys_mmap2

arch/m32r/kernel/syscall_table.S

@@ -168,7 +168,7 @@ ENTRY(sys_call_table)
 	.long sys_tas			/* vm86 syscall holder */
 	.long sys_ni_syscall		/* query_module syscall holder */
 	.long sys_poll
-	.long sys_nfsservctl
+	.long sys_ni_syscall		/* was nfsservctl */
 	.long sys_setresgid		/* 170 */
 	.long sys_getresgid
 	.long sys_prctl

arch/m68k/include/asm/page_mm.h

@@ -162,7 +162,7 @@ static inline __attribute_const__ int __virt_to_node_shift(void)
 	pgdat->node_mem_map + (__pfn - pgdat->node_start_pfn);		\
 })
 #define page_to_pfn(_page) ({						\
-	struct page *__p = (_page);					\
+	const struct page *__p = (_page);				\
 	struct pglist_data *pgdat;					\
 	pgdat = &pg_data_map[page_to_nid(__p)];				\
 	((__p) - pgdat->node_mem_map) + pgdat->node_start_pfn;		\

arch/m68k/kernel/syscalltable.S

@@ -189,7 +189,7 @@ ENTRY(sys_call_table)
 	.long sys_getpagesize
 	.long sys_ni_syscall		/* old "query_module" */
 	.long sys_poll
-	.long sys_nfsservctl
+	.long sys_ni_syscall		/* old nfsservctl */
 	.long sys_setresgid16		/* 170 */
 	.long sys_getresgid16
 	.long sys_prctl

arch/microblaze/kernel/syscall_table.S

@@ -173,7 +173,7 @@ ENTRY(sys_call_table)
 	.long sys_ni_syscall		/* sys_vm86 */
 	.long sys_ni_syscall		/* Old sys_query_module */
 	.long sys_poll
-	.long sys_nfsservctl
+	.long sys_ni_syscall		/* old nfsservctl */
 	.long sys_setresgid		/* 170 */
 	.long sys_getresgid
 	.long sys_prctl

arch/mips/kernel/scall32-o32.S

@@ -424,7 +424,7 @@ einval:	li	v0, -ENOSYS
 	sys	sys_getresuid		3
 	sys	sys_ni_syscall		0	/* was sys_query_module */
 	sys	sys_poll		3
-	sys	sys_nfsservctl		3
+	sys	sys_ni_syscall		0	/* was nfsservctl */
 	sys	sys_setresgid		3	/* 4190 */
 	sys	sys_getresgid		3
 	sys	sys_prctl		5

arch/mips/kernel/scall64-64.S

@@ -299,7 +299,7 @@ sys_call_table:
 	PTR	sys_ni_syscall			/* 5170, was get_kernel_syms */
 	PTR	sys_ni_syscall			/* was query_module */
 	PTR	sys_quotactl
-	PTR	sys_nfsservctl
+	PTR	sys_ni_syscall			/* was nfsservctl */
 	PTR	sys_ni_syscall			/* res. for getpmsg */
 	PTR	sys_ni_syscall			/* 5175  for putpmsg */
 	PTR	sys_ni_syscall			/* res. for afs_syscall */

arch/mips/kernel/scall64-n32.S

@@ -294,7 +294,7 @@ EXPORT(sysn32_call_table)
 	PTR	sys_ni_syscall			/* 6170, was get_kernel_syms */
 	PTR	sys_ni_syscall			/* was query_module */
 	PTR	sys_quotactl
-	PTR	compat_sys_nfsservctl
+	PTR	sys_ni_syscall			/* was nfsservctl */
 	PTR	sys_ni_syscall			/* res. for getpmsg */
 	PTR	sys_ni_syscall			/* 6175  for putpmsg */
 	PTR	sys_ni_syscall			/* res. for afs_syscall */

arch/mips/kernel/scall64-o32.S

@@ -392,7 +392,7 @@ sys_call_table:
 	PTR	sys_getresuid
 	PTR	sys_ni_syscall			/* was query_module */
 	PTR	sys_poll
-	PTR	compat_sys_nfsservctl
+	PTR	sys_ni_syscall			/* was nfsservctl */
 	PTR	sys_setresgid			/* 4190 */
 	PTR	sys_getresgid
 	PTR	sys_prctl

arch/mn10300/kernel/entry.S

@@ -589,7 +589,7 @@ ENTRY(sys_call_table)
 	.long sys_ni_syscall	/* vm86 */
 	.long sys_ni_syscall	/* Old sys_query_module */
 	.long sys_poll
-	.long sys_nfsservctl
+	.long sys_ni_syscall	/* was nfsservctl */
 	.long sys_setresgid16	/* 170 */
 	.long sys_getresgid16
 	.long sys_prctl

arch/parisc/kernel/syscall_table.S

@@ -259,7 +259,7 @@
 	ENTRY_SAME(ni_syscall)		/* query_module */
 	ENTRY_SAME(poll)
 	/* structs contain pointers and an in_addr... */
-	ENTRY_COMP(nfsservctl)
+	ENTRY_SAME(ni_syscall)		/* was nfsservctl */
 	ENTRY_SAME(setresgid)		/* 170 */
 	ENTRY_SAME(getresgid)
 	ENTRY_SAME(prctl)

arch/powerpc/boot/dts/p1023rds.dts

@@ -387,7 +387,7 @@
 			#size-cells = <1>;
 			compatible = "cfi-flash";
 			reg = <0x0 0x0 0x02000000>;
-			bank-width = <1>;
+			bank-width = <2>;
 			device-width = <1>;
 			partition@0 {
 				label = "ramdisk";

arch/powerpc/configs/85xx/p1023rds_defconfig

@@ -171,3 +171,4 @@ CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
 CONFIG_CRYPTO_AES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_FSL_CAAM=y

arch/powerpc/configs/corenet32_smp_defconfig

@@ -185,3 +185,4 @@ CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_SHA512=y
 CONFIG_CRYPTO_AES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_FSL_CAAM=y

arch/powerpc/configs/corenet64_smp_defconfig

@@ -100,5 +100,8 @@ CONFIG_DEBUG_INFO=y
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_VIRQ_DEBUG=y
 CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_AES=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_DEV_TALITOS=y
+CONFIG_CRYPTO_DEV_FSL_CAAM=y

arch/powerpc/configs/mpc85xx_defconfig

@@ -139,6 +139,7 @@ CONFIG_SND=y
 CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_PPC is not set
 # CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y

arch/powerpc/configs/mpc85xx_smp_defconfig

@@ -140,6 +140,7 @@ CONFIG_SND=y
 CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_PPC is not set
 # CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
 CONFIG_HID_A4TECH=y
 CONFIG_HID_APPLE=y
 CONFIG_HID_BELKIN=y

arch/powerpc/include/asm/systbl.h

@@ -171,7 +171,7 @@ SYSCALL_SPU(setresuid)
 SYSCALL_SPU(getresuid)
 SYSCALL(ni_syscall)
 SYSCALL_SPU(poll)
-COMPAT_SYS(nfsservctl)
+SYSCALL(ni_syscall)
 SYSCALL_SPU(setresgid)
 SYSCALL_SPU(getresgid)
 COMPAT_SYS_SPU(prctl)

arch/powerpc/sysdev/fsl_rio.c

@@ -54,6 +54,7 @@
 #define ODSR_CLEAR		0x1c00
 #define LTLEECSR_ENABLE_ALL	0xFFC000FC
 #define ESCSR_CLEAR		0x07120204
+#define IECSR_CLEAR		0x80000000
 
 #define RIO_PORT1_EDCSR		0x0640
 #define RIO_PORT2_EDCSR		0x0680
@@ -1089,11 +1090,11 @@ static void port_error_handler(struct rio_mport *port, int offset)
 
 	if (offset == 0) {
 		out_be32((u32 *)(rio_regs_win + RIO_PORT1_EDCSR), 0);
-		out_be32((u32 *)(rio_regs_win + RIO_PORT1_IECSR), 0);
+		out_be32((u32 *)(rio_regs_win + RIO_PORT1_IECSR), IECSR_CLEAR);
 		out_be32((u32 *)(rio_regs_win + RIO_ESCSR), ESCSR_CLEAR);
 	} else {
 		out_be32((u32 *)(rio_regs_win + RIO_PORT2_EDCSR), 0);
-		out_be32((u32 *)(rio_regs_win + RIO_PORT2_IECSR), 0);
+		out_be32((u32 *)(rio_regs_win + RIO_PORT2_IECSR), IECSR_CLEAR);
 		out_be32((u32 *)(rio_regs_win + RIO_PORT2_ESCSR), ESCSR_CLEAR);
 	}
 }

arch/s390/kernel/compat_wrapper.S

@@ -665,12 +665,6 @@ ENTRY(sys32_poll_wrapper)
 	lgfr	%r4,%r4			# long
 	jg	sys_poll		# branch to system call
 
-ENTRY(compat_sys_nfsservctl_wrapper)
-	lgfr	%r2,%r2			# int
-	llgtr	%r3,%r3			# struct compat_nfsctl_arg*
-	llgtr	%r4,%r4			# union compat_nfsctl_res*
-	jg	compat_sys_nfsservctl	# branch to system call
-
 ENTRY(sys32_setresgid16_wrapper)
 	llgfr	%r2,%r2			# __kernel_old_gid_emu31_t
 	llgfr	%r3,%r3			# __kernel_old_gid_emu31_t

arch/s390/kernel/early.c

@@ -396,17 +396,19 @@ static __init void detect_machine_facilities(void)
 static __init void rescue_initrd(void)
 {
 #ifdef CONFIG_BLK_DEV_INITRD
+	unsigned long min_initrd_addr = (unsigned long) _end + (4UL << 20);
 	/*
-	 * Move the initrd right behind the bss section in case it starts
-	 * within the bss section. So we don't overwrite it when the bss
-	 * section gets cleared.
+	 * Just like in case of IPL from VM reader we make sure there is a
+	 * gap of 4MB between end of kernel and start of initrd.
+	 * That way we can also be sure that saving an NSS will succeed,
+	 * which however only requires different segments.
 	 */
 	if (!INITRD_START || !INITRD_SIZE)
 		return;
-	if (INITRD_START >= (unsigned long) __bss_stop)
+	if (INITRD_START >= min_initrd_addr)
 		return;
-	memmove(__bss_stop, (void *) INITRD_START, INITRD_SIZE);
-	INITRD_START = (unsigned long) __bss_stop;
+	memmove((void *) min_initrd_addr, (void *) INITRD_START, INITRD_SIZE);
+	INITRD_START = min_initrd_addr;
 #endif
 }
 

arch/s390/kernel/ipl.c

@@ -1220,7 +1220,7 @@ static int __init reipl_fcp_init(void)
 	/* sysfs: create fcp kset for mixing attr group and bin attrs */
 	reipl_fcp_kset = kset_create_and_add(IPL_FCP_STR, NULL,
 					     &reipl_kset->kobj);
-	if (!reipl_kset) {
+	if (!reipl_fcp_kset) {
 		free_page((unsigned long) reipl_block_fcp);
 		return -ENOMEM;
 	}
@@ -1618,7 +1618,8 @@ static struct shutdown_action vmcmd_action = {SHUTDOWN_ACTION_VMCMD_STR,
 
 static void stop_run(struct shutdown_trigger *trigger)
 {
-	if (strcmp(trigger->name, ON_PANIC_STR) == 0)
+	if (strcmp(trigger->name, ON_PANIC_STR) == 0 ||
+	    strcmp(trigger->name, ON_RESTART_STR) == 0)
 		disabled_wait((unsigned long) __builtin_return_address(0));
 	while (sigp(smp_processor_id(), sigp_stop) == sigp_busy)
 		cpu_relax();
@@ -1717,7 +1718,7 @@ static void do_panic(void)
 /* on restart */
 
 static struct shutdown_trigger on_restart_trigger = {ON_RESTART_STR,
-	&reipl_action};
+	&stop_action};
 
 static ssize_t on_restart_show(struct kobject *kobj,
 			       struct kobj_attribute *attr, char *page)

arch/s390/kernel/syscalls.S

@@ -177,7 +177,7 @@ SYSCALL(sys_getresuid16,sys_ni_syscall,sys32_getresuid16_wrapper)	/* 165 old get
 NI_SYSCALL							/* for vm86 */
 NI_SYSCALL							/* old sys_query_module */
 SYSCALL(sys_poll,sys_poll,sys32_poll_wrapper)
-SYSCALL(sys_nfsservctl,sys_nfsservctl,compat_sys_nfsservctl_wrapper)
+NI_SYSCALL							/* old nfsservctl */
 SYSCALL(sys_setresgid16,sys_ni_syscall,sys32_setresgid16_wrapper)	/* 170 old setresgid16 syscall */
 SYSCALL(sys_getresgid16,sys_ni_syscall,sys32_getresgid16_wrapper)	/* old getresgid16 syscall */
 SYSCALL(sys_prctl,sys_prctl,sys32_prctl_wrapper)