Linux 2.6.35

nfs_commit_inode() needs to be defined irrespectively of whether or not
we are supporting NFSv3 and NFSv4.

Allow the compiler to optimise away code in the NFSv2-only case by
converting it into an inlined stub function.

Reported-and-tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Documentation/00-INDEX

@@ -32,8 +32,6 @@ DocBook/
 	- directory with DocBook templates etc. for kernel documentation.
 HOWTO
 	- the process and procedures of how to do Linux kernel development.
-IO-mapping.txt
-	- how to access I/O mapped memory from within device drivers.
 IPMI.txt
 	- info on Linux Intelligent Platform Management Interface (IPMI) Driver.
 IRQ-affinity.txt
@@ -84,6 +82,8 @@ blockdev/
 	- info on block devices & drivers
 btmrvl.txt
 	- info on Marvell Bluetooth driver usage.
+bus-virt-phys-mapping.txt
+	- how to access I/O mapped memory from within device drivers.
 cachetlb.txt
 	- describes the cache/TLB flushing interfaces Linux uses.
 cdrom/
@@ -168,6 +168,8 @@ initrd.txt
 	- how to use the RAM disk as an initial/temporary root filesystem.
 input/
 	- info on Linux input device support.
+io-mapping.txt
+	- description of io_mapping functions in linux/io-mapping.h
 io_ordering.txt
 	- info on ordering I/O writes to memory-mapped addresses.
 ioctl/

Documentation/credentials.txt

@@ -417,6 +417,9 @@ reference on them using:
 This does all the RCU magic inside of it.  The caller must call put_cred() on
 the credentials so obtained when they're finished with.
 
+ [*] Note: The result of __task_cred() should not be passed directly to
+     get_cred() as this may race with commit_cred().
+
 There are a couple of convenience functions to access bits of another task's
 credentials, hiding the RCU magic from the caller:
 

Documentation/feature-removal-schedule.txt

@@ -647,3 +647,10 @@ Who:	Stefan Richter <stefanr@s5r6.in-berlin.de>
 
 ----------------------------
 
+What:	The acpi_sleep=s4_nonvs command line option
+When:	2.6.37
+Files:	arch/x86/kernel/acpi/sleep.c
+Why:	superseded by acpi_sleep=nonvs
+Who:	Rafael J. Wysocki <rjw@sisk.pl>
+
+----------------------------

Documentation/kernel-parameters.txt

@@ -254,8 +254,8 @@ and is between 256 and 4096 characters. It is defined in the file
 			control method, with respect to putting devices into
 			low power states, to be enforced (the ACPI 2.0 ordering
 			of _PTS is used by default).
-			s4_nonvs prevents the kernel from saving/restoring the
-			ACPI NVS memory during hibernation.
+			nonvs prevents the kernel from saving/restoring the
+			ACPI NVS memory during suspend/hibernation and resume.
 			sci_force_enable causes the kernel to set SCI_EN directly
 			on resume from S1/S3 (which is against the ACPI spec,
 			but some broken systems don't work without it).
@@ -1265,7 +1265,7 @@ and is between 256 and 4096 characters. It is defined in the file
 			If there are multiple matching configurations changing
 			the same attribute, the last one is used.
 
-	lmb=debug	[KNL] Enable lmb debug messages.
+	memblock=debug	[KNL] Enable memblock debug messages.
 
 	load_ramdisk=	[RAM] List of ramdisks to load from floppy
 			See Documentation/blockdev/ramdisk.txt.

MAINTAINERS

@@ -5336,6 +5336,7 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6.git
 S:	Maintained
 F:	arch/sparc/
+F:	drivers/sbus
 
 SPARC SERIAL DRIVERS
 M:	"David S. Miller" <davem@davemloft.net>
@@ -6242,6 +6243,8 @@ F:	drivers/mmc/host/wbsd.*
 
 WATCHDOG DEVICE DRIVERS
 M:	Wim Van Sebroeck <wim@iguana.be>
+L:	linux-watchdog@vger.kernel.org
+W:	http://www.linux-watchdog.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git
 S:	Maintained
 F:	Documentation/watchdog/

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 35
-EXTRAVERSION = -rc5
+EXTRAVERSION =
 NAME = Sheep on Meth
 
 # *DOCUMENTATION*

arch/arm/boot/compressed/Makefile

@@ -71,6 +71,9 @@ targets       := vmlinux vmlinux.lds \
 		 piggy.$(suffix_y) piggy.$(suffix_y).o \
 		 font.o font.c head.o misc.o $(OBJS)
 
+# Make sure files are removed during clean
+extra-y       += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S
+
 ifeq ($(CONFIG_FUNCTION_TRACER),y)
 ORIG_CFLAGS := $(KBUILD_CFLAGS)
 KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))

arch/arm/common/sa1111.c

@@ -1028,13 +1028,12 @@ static int sa1111_remove(struct platform_device *pdev)
 	struct sa1111 *sachip = platform_get_drvdata(pdev);
 
 	if (sachip) {
-		__sa1111_remove(sachip);
-		platform_set_drvdata(pdev, NULL);
-
 #ifdef CONFIG_PM
 		kfree(sachip->saved_state);
 		sachip->saved_state = NULL;
 #endif
+		__sa1111_remove(sachip);
+		platform_set_drvdata(pdev, NULL);
 	}
 
 	return 0;

arch/arm/include/asm/atomic.h

@@ -40,12 +40,12 @@ static inline void atomic_add(int i, atomic_t *v)
 	int result;
 
 	__asm__ __volatile__("@ atomic_add\n"
-"1:	ldrex	%0, [%2]\n"
-"	add	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
+"1:	ldrex	%0, [%3]\n"
+"	add	%0, %0, %4\n"
+"	strex	%1, %0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "Ir" (i)
 	: "cc");
 }
@@ -58,12 +58,12 @@ static inline int atomic_add_return(int i, atomic_t *v)
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic_add_return\n"
-"1:	ldrex	%0, [%2]\n"
-"	add	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
+"1:	ldrex	%0, [%3]\n"
+"	add	%0, %0, %4\n"
+"	strex	%1, %0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "Ir" (i)
 	: "cc");
 
@@ -78,12 +78,12 @@ static inline void atomic_sub(int i, atomic_t *v)
 	int result;
 
 	__asm__ __volatile__("@ atomic_sub\n"
-"1:	ldrex	%0, [%2]\n"
-"	sub	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
+"1:	ldrex	%0, [%3]\n"
+"	sub	%0, %0, %4\n"
+"	strex	%1, %0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "Ir" (i)
 	: "cc");
 }
@@ -96,12 +96,12 @@ static inline int atomic_sub_return(int i, atomic_t *v)
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic_sub_return\n"
-"1:	ldrex	%0, [%2]\n"
-"	sub	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
+"1:	ldrex	%0, [%3]\n"
+"	sub	%0, %0, %4\n"
+"	strex	%1, %0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "Ir" (i)
 	: "cc");
 
@@ -118,11 +118,11 @@ static inline int atomic_cmpxchg(atomic_t *ptr, int old, int new)
 
 	do {
 		__asm__ __volatile__("@ atomic_cmpxchg\n"
-		"ldrex	%1, [%2]\n"
+		"ldrex	%1, [%3]\n"
 		"mov	%0, #0\n"
-		"teq	%1, %3\n"
-		"strexeq %0, %4, [%2]\n"
-		    : "=&r" (res), "=&r" (oldval)
+		"teq	%1, %4\n"
+		"strexeq %0, %5, [%3]\n"
+		    : "=&r" (res), "=&r" (oldval), "+Qo" (ptr->counter)
 		    : "r" (&ptr->counter), "Ir" (old), "r" (new)
 		    : "cc");
 	} while (res);
@@ -137,12 +137,12 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr)
 	unsigned long tmp, tmp2;
 
 	__asm__ __volatile__("@ atomic_clear_mask\n"
-"1:	ldrex	%0, [%2]\n"
-"	bic	%0, %0, %3\n"
-"	strex	%1, %0, [%2]\n"
+"1:	ldrex	%0, [%3]\n"
+"	bic	%0, %0, %4\n"
+"	strex	%1, %0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (tmp), "=&r" (tmp2)
+	: "=&r" (tmp), "=&r" (tmp2), "+Qo" (*addr)
 	: "r" (addr), "Ir" (mask)
 	: "cc");
 }
@@ -249,7 +249,7 @@ static inline u64 atomic64_read(atomic64_t *v)
 	__asm__ __volatile__("@ atomic64_read\n"
 "	ldrexd	%0, %H0, [%1]"
 	: "=&r" (result)
-	: "r" (&v->counter)
+	: "r" (&v->counter), "Qo" (v->counter)
 	);
 
 	return result;
@@ -260,11 +260,11 @@ static inline void atomic64_set(atomic64_t *v, u64 i)
 	u64 tmp;
 
 	__asm__ __volatile__("@ atomic64_set\n"
-"1:	ldrexd	%0, %H0, [%1]\n"
-"	strexd	%0, %2, %H2, [%1]\n"
+"1:	ldrexd	%0, %H0, [%2]\n"
+"	strexd	%0, %3, %H3, [%2]\n"
 "	teq	%0, #0\n"
 "	bne	1b"
-	: "=&r" (tmp)
+	: "=&r" (tmp), "=Qo" (v->counter)
 	: "r" (&v->counter), "r" (i)
 	: "cc");
 }
@@ -275,13 +275,13 @@ static inline void atomic64_add(u64 i, atomic64_t *v)
 	unsigned long tmp;
 
 	__asm__ __volatile__("@ atomic64_add\n"
-"1:	ldrexd	%0, %H0, [%2]\n"
-"	adds	%0, %0, %3\n"
-"	adc	%H0, %H0, %H3\n"
-"	strexd	%1, %0, %H0, [%2]\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
+"	adds	%0, %0, %4\n"
+"	adc	%H0, %H0, %H4\n"
+"	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "r" (i)
 	: "cc");
 }
@@ -294,13 +294,13 @@ static inline u64 atomic64_add_return(u64 i, atomic64_t *v)
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic64_add_return\n"
-"1:	ldrexd	%0, %H0, [%2]\n"
-"	adds	%0, %0, %3\n"
-"	adc	%H0, %H0, %H3\n"
-"	strexd	%1, %0, %H0, [%2]\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
+"	adds	%0, %0, %4\n"
+"	adc	%H0, %H0, %H4\n"
+"	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "r" (i)
 	: "cc");
 
@@ -315,13 +315,13 @@ static inline void atomic64_sub(u64 i, atomic64_t *v)
 	unsigned long tmp;
 
 	__asm__ __volatile__("@ atomic64_sub\n"
-"1:	ldrexd	%0, %H0, [%2]\n"
-"	subs	%0, %0, %3\n"
-"	sbc	%H0, %H0, %H3\n"
-"	strexd	%1, %0, %H0, [%2]\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
+"	subs	%0, %0, %4\n"
+"	sbc	%H0, %H0, %H4\n"
+"	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "r" (i)
 	: "cc");
 }
@@ -334,13 +334,13 @@ static inline u64 atomic64_sub_return(u64 i, atomic64_t *v)
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic64_sub_return\n"
-"1:	ldrexd	%0, %H0, [%2]\n"
-"	subs	%0, %0, %3\n"
-"	sbc	%H0, %H0, %H3\n"
-"	strexd	%1, %0, %H0, [%2]\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
+"	subs	%0, %0, %4\n"
+"	sbc	%H0, %H0, %H4\n"
+"	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "r" (i)
 	: "cc");
 
@@ -358,12 +358,12 @@ static inline u64 atomic64_cmpxchg(atomic64_t *ptr, u64 old, u64 new)
 
 	do {
 		__asm__ __volatile__("@ atomic64_cmpxchg\n"
-		"ldrexd		%1, %H1, [%2]\n"
+		"ldrexd		%1, %H1, [%3]\n"
 		"mov		%0, #0\n"
-		"teq		%1, %3\n"
-		"teqeq		%H1, %H3\n"
-		"strexdeq	%0, %4, %H4, [%2]"
-		: "=&r" (res), "=&r" (oldval)
+		"teq		%1, %4\n"
+		"teqeq		%H1, %H4\n"
+		"strexdeq	%0, %5, %H5, [%3]"
+		: "=&r" (res), "=&r" (oldval), "+Qo" (ptr->counter)
 		: "r" (&ptr->counter), "r" (old), "r" (new)
 		: "cc");
 	} while (res);
@@ -381,11 +381,11 @@ static inline u64 atomic64_xchg(atomic64_t *ptr, u64 new)
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic64_xchg\n"
-"1:	ldrexd	%0, %H0, [%2]\n"
-"	strexd	%1, %3, %H3, [%2]\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
+"	strexd	%1, %4, %H4, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (ptr->counter)
 	: "r" (&ptr->counter), "r" (new)
 	: "cc");
 
@@ -402,16 +402,16 @@ static inline u64 atomic64_dec_if_positive(atomic64_t *v)
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic64_dec_if_positive\n"
-"1:	ldrexd	%0, %H0, [%2]\n"
+"1:	ldrexd	%0, %H0, [%3]\n"
 "	subs	%0, %0, #1\n"
 "	sbc	%H0, %H0, #0\n"
 "	teq	%H0, #0\n"
 "	bmi	2f\n"
-"	strexd	%1, %0, %H0, [%2]\n"
+"	strexd	%1, %0, %H0, [%3]\n"
 "	teq	%1, #0\n"
 "	bne	1b\n"
 "2:"
-	: "=&r" (result), "=&r" (tmp)
+	: "=&r" (result), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter)
 	: "cc");
 
@@ -429,18 +429,18 @@ static inline int atomic64_add_unless(atomic64_t *v, u64 a, u64 u)
 	smp_mb();
 
 	__asm__ __volatile__("@ atomic64_add_unless\n"
-"1:	ldrexd	%0, %H0, [%3]\n"
-"	teq	%0, %4\n"
-"	teqeq	%H0, %H4\n"
+"1:	ldrexd	%0, %H0, [%4]\n"
+"	teq	%0, %5\n"
+"	teqeq	%H0, %H5\n"
 "	moveq	%1, #0\n"
 "	beq	2f\n"
-"	adds	%0, %0, %5\n"
-"	adc	%H0, %H0, %H5\n"
-"	strexd	%2, %0, %H0, [%3]\n"
+"	adds	%0, %0, %6\n"
+"	adc	%H0, %H0, %H6\n"
+"	strexd	%2, %0, %H0, [%4]\n"
 "	teq	%2, #0\n"
 "	bne	1b\n"
 "2:"
-	: "=&r" (val), "=&r" (ret), "=&r" (tmp)
+	: "=&r" (val), "+r" (ret), "=&r" (tmp), "+Qo" (v->counter)
 	: "r" (&v->counter), "r" (u), "r" (a)
 	: "cc");
 

arch/arm/include/asm/io.h

@@ -26,6 +26,7 @@
 #include <linux/types.h>
 #include <asm/byteorder.h>
 #include <asm/memory.h>
+#include <asm/system.h>
 
 /*
  * ISA I/O bus memory addresses are 1:1 with the physical address.
@@ -179,25 +180,38 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
  * IO port primitives for more information.
  */
 #ifdef __mem_pci
-#define readb(c) ({ __u8  __v = __raw_readb(__mem_pci(c)); __v; })
-#define readw(c) ({ __u16 __v = le16_to_cpu((__force __le16) \
+#define readb_relaxed(c) ({ u8  __v = __raw_readb(__mem_pci(c)); __v; })
+#define readw_relaxed(c) ({ u16 __v = le16_to_cpu((__force __le16) \
 					__raw_readw(__mem_pci(c))); __v; })
-#define readl(c) ({ __u32 __v = le32_to_cpu((__force __le32) \
+#define readl_relaxed(c) ({ u32 __v = le32_to_cpu((__force __le32) \
 					__raw_readl(__mem_pci(c))); __v; })
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
+
+#define writeb_relaxed(v,c)	((void)__raw_writeb(v,__mem_pci(c)))
+#define writew_relaxed(v,c)	((void)__raw_writew((__force u16) \
+					cpu_to_le16(v),__mem_pci(c)))
+#define writel_relaxed(v,c)	((void)__raw_writel((__force u32) \
+					cpu_to_le32(v),__mem_pci(c)))
+
+#ifdef CONFIG_ARM_DMA_MEM_BUFFERABLE
+#define __iormb()		rmb()
+#define __iowmb()		wmb()
+#else
+#define __iormb()		do { } while (0)
+#define __iowmb()		do { } while (0)
+#endif
+
+#define readb(c)		({ u8  __v = readb_relaxed(c); __iormb(); __v; })
+#define readw(c)		({ u16 __v = readw_relaxed(c); __iormb(); __v; })
+#define readl(c)		({ u32 __v = readl_relaxed(c); __iormb(); __v; })
+
+#define writeb(v,c)		({ __iowmb(); writeb_relaxed(v,c); })
+#define writew(v,c)		({ __iowmb(); writew_relaxed(v,c); })
+#define writel(v,c)		({ __iowmb(); writel_relaxed(v,c); })
 
 #define readsb(p,d,l)		__raw_readsb(__mem_pci(p),d,l)
 #define readsw(p,d,l)		__raw_readsw(__mem_pci(p),d,l)
 #define readsl(p,d,l)		__raw_readsl(__mem_pci(p),d,l)
 
-#define writeb(v,c)		__raw_writeb(v,__mem_pci(c))
-#define writew(v,c)		__raw_writew((__force __u16) \
-					cpu_to_le16(v),__mem_pci(c))
-#define writel(v,c)		__raw_writel((__force __u32) \
-					cpu_to_le32(v),__mem_pci(c))
-
 #define writesb(p,d,l)		__raw_writesb(__mem_pci(p),d,l)
 #define writesw(p,d,l)		__raw_writesw(__mem_pci(p),d,l)
 #define writesl(p,d,l)		__raw_writesl(__mem_pci(p),d,l)
@@ -244,13 +258,13 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
  * io{read,write}{8,16,32} macros
  */
 #ifndef ioread8
-#define ioread8(p)	({ unsigned int __v = __raw_readb(p); __v; })
-#define ioread16(p)	({ unsigned int __v = le16_to_cpu((__force __le16)__raw_readw(p)); __v; })
-#define ioread32(p)	({ unsigned int __v = le32_to_cpu((__force __le32)__raw_readl(p)); __v; })
+#define ioread8(p)	({ unsigned int __v = __raw_readb(p); __iormb(); __v; })
+#define ioread16(p)	({ unsigned int __v = le16_to_cpu((__force __le16)__raw_readw(p)); __iormb(); __v; })
+#define ioread32(p)	({ unsigned int __v = le32_to_cpu((__force __le32)__raw_readl(p)); __iormb(); __v; })
 
-#define iowrite8(v,p)	__raw_writeb(v, p)
-#define iowrite16(v,p)	__raw_writew((__force __u16)cpu_to_le16(v), p)
-#define iowrite32(v,p)	__raw_writel((__force __u32)cpu_to_le32(v), p)
+#define iowrite8(v,p)	({ __iowmb(); (void)__raw_writeb(v, p); })
+#define iowrite16(v,p)	({ __iowmb(); (void)__raw_writew((__force __u16)cpu_to_le16(v), p); })
+#define iowrite32(v,p)	({ __iowmb(); (void)__raw_writel((__force __u32)cpu_to_le32(v), p); })
 
 #define ioread8_rep(p,d,c)	__raw_readsb(p,d,c)
 #define ioread16_rep(p,d,c)	__raw_readsw(p,d,c)

arch/arm/kernel/entry-armv.S

@@ -162,8 +162,6 @@ ENDPROC(__und_invalid)
 	@  r4 - orig_r0 (see pt_regs definition in ptrace.h)
 	@
 	stmia	r5, {r0 - r4}
-
-	asm_trace_hardirqs_off
 	.endm
 
 	.align	5
@@ -204,7 +202,7 @@ __dabt_svc:
 	@
 	@ IRQs off again before pulling preserved data off the stack
 	@
-	disable_irq
+	disable_irq_notrace
 
 	@
 	@ restore SPSR and restart the instruction
@@ -218,6 +216,9 @@ ENDPROC(__dabt_svc)
 __irq_svc:
 	svc_entry
 
+#ifdef CONFIG_TRACE_IRQFLAGS
+	bl	trace_hardirqs_off
+#endif
 #ifdef CONFIG_PREEMPT
 	get_thread_info tsk
 	ldr	r8, [tsk, #TI_PREEMPT]		@ get preempt count
@@ -291,7 +292,7 @@ __und_svc:
 	@
 	@ IRQs off again before pulling preserved data off the stack
 	@
-1:	disable_irq
+1:	disable_irq_notrace
 
 	@
 	@ restore SPSR and restart the instruction
@@ -327,7 +328,7 @@ __pabt_svc:
 	@
 	@ IRQs off again before pulling preserved data off the stack
 	@
-	disable_irq
+	disable_irq_notrace
 
 	@
 	@ restore SPSR and restart the instruction
@@ -393,8 +394,6 @@ ENDPROC(__pabt_svc)
 	@ Clear FP to mark the first stack frame
 	@
 	zero_fp
-
-	asm_trace_hardirqs_off
 	.endm
 
 	.macro	kuser_cmpxchg_check
@@ -465,9 +464,6 @@ __irq_usr:
  THUMB(	movne	r0, #0		)
  THUMB(	strne	r0, [r0]	)
 #endif
-#ifdef CONFIG_TRACE_IRQFLAGS
-	bl	trace_hardirqs_on
-#endif
 
 	mov	why, #0
 	b	ret_to_user

arch/arm/kernel/kprobes-decode.c

@@ -583,13 +583,14 @@ static void __kprobes emulate_ldr(struct kprobe *p, struct pt_regs *regs)
 {
 	insn_llret_3arg_fn_t *i_fn = (insn_llret_3arg_fn_t *)&p->ainsn.insn[0];
 	kprobe_opcode_t insn = p->opcode;
+	long ppc = (long)p->addr + 8;
 	union reg_pair fnr;
 	int rd = (insn >> 12) & 0xf;
 	int rn = (insn >> 16) & 0xf;
 	int rm = insn & 0xf;
 	long rdv;
-	long rnv  = regs->uregs[rn];
-	long rmv  = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */
+	long rnv = (rn == 15) ? ppc : regs->uregs[rn];
+	long rmv = (rm == 15) ? ppc : regs->uregs[rm];
 	long cpsr = regs->ARM_cpsr;
 
 	fnr.dr = insnslot_llret_3arg_rflags(rnv, 0, rmv, cpsr, i_fn);

arch/arm/kernel/process.c

@@ -351,17 +351,21 @@ EXPORT_SYMBOL(dump_fpu);
 
 /*
  * Shuffle the argument into the correct register before calling the
- * thread function.  r1 is the thread argument, r2 is the pointer to
- * the thread function, and r3 points to the exit function.
+ * thread function.  r4 is the thread argument, r5 is the pointer to
+ * the thread function, and r6 points to the exit function.
  */
 extern void kernel_thread_helper(void);
 asm(	".pushsection .text\n"
 "	.align\n"
 "	.type	kernel_thread_helper, #function\n"
 "kernel_thread_helper:\n"
-"	mov	r0, r1\n"
-"	mov	lr, r3\n"
-"	mov	pc, r2\n"
+#ifdef CONFIG_TRACE_IRQFLAGS
+"	bl	trace_hardirqs_on\n"
+#endif
+"	msr	cpsr_c, r7\n"
+"	mov	r0, r4\n"
+"	mov	lr, r6\n"
+"	mov	pc, r5\n"
 "	.size	kernel_thread_helper, . - kernel_thread_helper\n"
 "	.popsection");
 
@@ -391,11 +395,12 @@ pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
 
 	memset(&regs, 0, sizeof(regs));
 
-	regs.ARM_r1 = (unsigned long)arg;
-	regs.ARM_r2 = (unsigned long)fn;
-	regs.ARM_r3 = (unsigned long)kernel_thread_exit;
+	regs.ARM_r4 = (unsigned long)arg;
+	regs.ARM_r5 = (unsigned long)fn;
+	regs.ARM_r6 = (unsigned long)kernel_thread_exit;
+	regs.ARM_r7 = SVC_MODE | PSR_ENDSTATE | PSR_ISETSTATE;
 	regs.ARM_pc = (unsigned long)kernel_thread_helper;
-	regs.ARM_cpsr = SVC_MODE | PSR_ENDSTATE | PSR_ISETSTATE;
+	regs.ARM_cpsr = regs.ARM_r7 | PSR_I_BIT;
 
 	return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, &regs, 0, NULL, NULL);
 }

arch/arm/lib/csumpartialcopyuser.S

@@ -71,7 +71,7 @@
 		.pushsection .fixup,"ax"
 		.align	4
 9001:		mov	r4, #-EFAULT
-		ldr	r5, [fp, #4]		@ *err_ptr
+		ldr	r5, [sp, #8*4]		@ *err_ptr
 		str	r4, [r5]
 		ldmia	sp, {r1, r2}		@ retrieve dst, len
 		add	r2, r2, r1

arch/arm/mach-clps711x/include/mach/debug-macro.S

@@ -11,6 +11,7 @@
  *
 */
 
+#include <mach/hardware.h>
 #include <asm/hardware/clps7111.h>
 
 		.macro	addruart, rx, tmp

arch/arm/mach-davinci/board-da850-evm.c

@@ -25,6 +25,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/regulator/machine.h>
+#include <linux/regulator/tps6507x.h>
 #include <linux/mfd/tps6507x.h>
 #include <linux/input/tps6507x-ts.h>
 
@@ -469,6 +470,11 @@ struct regulator_consumer_supply tps65070_ldo2_consumers[] = {
 	},
 };
 
+/* We take advantage of the fact that both defdcdc{2,3} are tied high */
+static struct tps6507x_reg_platform_data tps6507x_platform_data = {
+	.defdcdc_default = true,
+};
+
 struct regulator_init_data tps65070_regulator_data[] = {
 	/* dcdc1 */
 	{
@@ -494,6 +500,7 @@ struct regulator_init_data tps65070_regulator_data[] = {
 		},
 		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers),
 		.consumer_supplies = tps65070_dcdc2_consumers,
+		.driver_data = &tps6507x_platform_data,
 	},
 
 	/* dcdc3 */
@@ -507,6 +514,7 @@ struct regulator_init_data tps65070_regulator_data[] = {
 		},
 		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers),
 		.consumer_supplies = tps65070_dcdc3_consumers,
+		.driver_data = &tps6507x_platform_data,
 	},
 
 	/* ldo1 */

arch/arm/mach-footbridge/common.c

@@ -232,7 +232,7 @@ EXPORT_SYMBOL(__bus_to_virt);
 
 unsigned long __pfn_to_bus(unsigned long pfn)
 {
-	return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET));
+	return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET);
 }
 EXPORT_SYMBOL(__pfn_to_bus);
 

arch/arm/mach-h720x/include/mach/debug-macro.S

@@ -11,8 +11,10 @@
  *
 */
 
-		.equ    io_virt, IO_BASE
-		.equ    io_phys, IO_START
+#include <mach/hardware.h>
+
+		.equ    io_virt, IO_VIRT
+		.equ    io_phys, IO_PHYS
 
 		.macro  addruart, rx, tmp
 		mrc     p15, 0, \rx, c1, c0

arch/arm/mach-kirkwood/tsx1x-common.c

@@ -77,7 +77,7 @@ struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
 	},
 };
 
-void qnap_tsx1x_register_flash(void)
+void __init qnap_tsx1x_register_flash(void)
 {
 	spi_register_board_info(qnap_tsx1x_spi_slave_info,
 				ARRAY_SIZE(qnap_tsx1x_spi_slave_info));

arch/arm/mach-kirkwood/tsx1x-common.h

@@ -1,7 +1,7 @@
 #ifndef __ARCH_KIRKWOOD_TSX1X_COMMON_H
 #define __ARCH_KIRKWOOD_TSX1X_COMMON_H
 
-extern void qnap_tsx1x_register_flash(void);
+extern void __init qnap_tsx1x_register_flash(void);
 extern void qnap_tsx1x_power_off(void);
 
 #endif

arch/arm/mach-ns9xxx/include/mach/debug-macro.S

@@ -8,6 +8,7 @@
  * the Free Software Foundation.
  */
 #include <mach/hardware.h>
+#include <asm/memory.h>
 
 #include <mach/regs-board-a9m9750dev.h>
 

arch/arm/mach-ns9xxx/include/mach/uncompress.h

@@ -20,50 +20,49 @@ static void putc_dummy(char c, void __iomem *base)
 	/* nothing */
 }
 
+static int timeout;
+
 static void putc_ns9360(char c, void __iomem *base)
 {
-	static int t = 0x10000;
 	do {
-		if (t)
-			--t;
+		if (timeout)
+			--timeout;
 
 		if (__raw_readl(base + 8) & (1 << 3)) {
 			__raw_writeb(c, base + 16);
-			t = 0x10000;
+			timeout = 0x10000;
 			break;
 		}
-	} while (t);
+	} while (timeout);
 }
 
 static void putc_a9m9750dev(char c, void __iomem *base)
 {
-	static int t = 0x10000;
 	do {
-		if (t)
-			--t;
+		if (timeout)
+			--timeout;
 
 		if (__raw_readb(base + 5) & (1 << 5)) {
 			__raw_writeb(c, base);
-			t = 0x10000;
+			timeout = 0x10000;
 			break;
 		}
-	} while (t);
+	} while (timeout);
 
 }
 
 static void putc_ns921x(char c, void __iomem *base)
 {
-	static int t = 0x10000;
 	do {
-		if (t)
-			--t;
+		if (timeout)
+			--timeout;
 
 		if (!(__raw_readl(base) & (1 << 11))) {
 			__raw_writeb(c, base + 0x0028);
-			t = 0x10000;
+			timeout = 0x10000;
 			break;
 		}
-	} while (t);
+	} while (timeout);
 }
 
 #define MSCS __REG(0xA0900184)
@@ -89,6 +88,7 @@ static void putc_ns921x(char c, void __iomem *base)
 
 static void autodetect(void (**putc)(char, void __iomem *), void __iomem **base)
 {
+	timeout = 0x10000;
 	if (((__raw_readl(MSCS) >> 16) & 0xfe) == 0x00) {
 		/* ns9360 or ns9750 */
 		if (NS9360_UART_ENABLED(NS9360_UARTA)) {

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -175,6 +175,10 @@ static void __init rx51_add_gpio_keys(void)
 #endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */
 
 static int board_keymap[] = {
+	/*
+	 * Note that KEY(x, 8, KEY_XXX) entries represent "entrire row
+	 * connected to the ground" matrix state.
+	 */
 	KEY(0, 0, KEY_Q),
 	KEY(0, 1, KEY_O),
 	KEY(0, 2, KEY_P),
@@ -182,6 +186,7 @@ static int board_keymap[] = {
 	KEY(0, 4, KEY_BACKSPACE),
 	KEY(0, 6, KEY_A),
 	KEY(0, 7, KEY_S),
+
 	KEY(1, 0, KEY_W),
 	KEY(1, 1, KEY_D),
 	KEY(1, 2, KEY_F),
@@ -190,6 +195,7 @@ static int board_keymap[] = {
 	KEY(1, 5, KEY_J),
 	KEY(1, 6, KEY_K),
 	KEY(1, 7, KEY_L),
+
 	KEY(2, 0, KEY_E),
 	KEY(2, 1, KEY_DOT),
 	KEY(2, 2, KEY_UP),
@@ -197,6 +203,8 @@ static int board_keymap[] = {
 	KEY(2, 5, KEY_Z),
 	KEY(2, 6, KEY_X),
 	KEY(2, 7, KEY_C),
+	KEY(2, 8, KEY_F9),
+
 	KEY(3, 0, KEY_R),
 	KEY(3, 1, KEY_V),
 	KEY(3, 2, KEY_B),
@@ -205,20 +213,23 @@ static int board_keymap[] = {
 	KEY(3, 5, KEY_SPACE),
 	KEY(3, 6, KEY_SPACE),
 	KEY(3, 7, KEY_LEFT),
+
 	KEY(4, 0, KEY_T),
 	KEY(4, 1, KEY_DOWN),
 	KEY(4, 2, KEY_RIGHT),
 	KEY(4, 4, KEY_LEFTCTRL),
 	KEY(4, 5, KEY_RIGHTALT),
 	KEY(4, 6, KEY_LEFTSHIFT),
+	KEY(4, 8, KEY_F10),
+
 	KEY(5, 0, KEY_Y),
+	KEY(5, 8, KEY_F11),
+
 	KEY(6, 0, KEY_U),
+
 	KEY(7, 0, KEY_I),
 	KEY(7, 1, KEY_F7),
 	KEY(7, 2, KEY_F8),
-	KEY(0xff, 2, KEY_F9),
-	KEY(0xff, 4, KEY_F10),
-	KEY(0xff, 5, KEY_F11),
 };
 
 static struct matrix_keymap_data board_map_data = {

arch/arm/mach-pxa/colibri-pxa300.c

@@ -26,6 +26,7 @@
 #include <mach/colibri.h>
 #include <mach/ohci.h>
 #include <mach/pxafb.h>
+#include <mach/audio.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -145,7 +146,7 @@ static void __init colibri_pxa300_init_lcd(void)
 static inline void colibri_pxa300_init_lcd(void) {}
 #endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
 
-#if defined(SND_AC97_CODEC) || defined(SND_AC97_CODEC_MODULE)
+#if defined(CONFIG_SND_AC97_CODEC) || defined(CONFIG_SND_AC97_CODEC_MODULE)
 static mfp_cfg_t colibri_pxa310_ac97_pin_config[] __initdata = {
 	GPIO24_AC97_SYSCLK,
 	GPIO23_AC97_nACRESET,

arch/arm/mach-pxa/corgi.c

@@ -446,7 +446,7 @@ static struct platform_device corgiled_device = {
 static struct pxamci_platform_data corgi_mci_platform_data = {
 	.detect_delay_ms	= 250,
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect	= -1,
+	.gpio_card_detect	= CORGI_GPIO_nSD_DETECT,
 	.gpio_card_ro		= CORGI_GPIO_nSD_WP,
 	.gpio_power		= CORGI_GPIO_SD_PWR,
 };

arch/arm/mach-pxa/cpufreq-pxa2xx.c

@@ -256,13 +256,9 @@ static void init_sdram_rows(void)
 
 static u32 mdrefr_dri(unsigned int freq)
 {
-	u32 dri = 0;
+	u32 interval = freq * SDRAM_TREF / sdram_rows;
 
-	if (cpu_is_pxa25x())
-		dri = ((freq * SDRAM_TREF) / (sdram_rows * 32));
-	if (cpu_is_pxa27x())
-		dri = ((freq * SDRAM_TREF) / (sdram_rows - 31)) / 32;
-	return dri;
+	return (interval - (cpu_is_pxa27x() ? 31 : 0)) / 32;
 }
 
 /* find a valid frequency point */

arch/arm/mach-pxa/pxa27x.c

@@ -41,10 +41,10 @@ void pxa27x_clear_otgph(void)
 EXPORT_SYMBOL(pxa27x_clear_otgph);
 
 static unsigned long ac97_reset_config[] = {
-	GPIO95_AC97_nRESET,
-	GPIO95_GPIO,
-	GPIO113_AC97_nRESET,
 	GPIO113_GPIO,
+	GPIO113_AC97_nRESET,
+	GPIO95_GPIO,
+	GPIO95_AC97_nRESET,
 };
 
 void pxa27x_assert_ac97reset(int reset_gpio, int on)

arch/arm/mach-realview/core.c

@@ -237,7 +237,7 @@ static unsigned int realview_mmc_status(struct device *dev)
 	else
 		mask = 2;
 
-	return !(readl(REALVIEW_SYSMCI) & mask);
+	return readl(REALVIEW_SYSMCI) & mask;
 }
 
 struct mmci_platform_data realview_mmc0_plat_data = {

arch/arm/mach-shark/include/mach/debug-macro.S

@@ -20,6 +20,9 @@
 		strb	\rd, [\rx]
 		.endm
 
+		.macro waituart,rd,rx
+		.endm
+
 		.macro	busyuart,rd,rx
 		mov	\rd, #0
 1001:		add	\rd, \rd, #1

arch/arm/mach-ux500/clock.c

@@ -131,7 +131,7 @@ EXPORT_SYMBOL(clk_disable);
  */
 static unsigned long clk_mtu_get_rate(struct clk *clk)
 {
-	void __iomem *addr = __io_address(U8500_PRCMU_BASE)
+	void __iomem *addr = __io_address(UX500_PRCMU_BASE)
 		+ PRCM_TCR;
 	u32 tcr = readl(addr);
 	int mtu = (int) clk->data;

arch/arm/mach-ux500/cpu-db5500.c

@@ -21,6 +21,7 @@ static struct map_desc u5500_io_desc[] __initdata = {
 	__IO_DEV_DESC(U5500_GPIO2_BASE, SZ_4K),
 	__IO_DEV_DESC(U5500_GPIO3_BASE, SZ_4K),
 	__IO_DEV_DESC(U5500_GPIO4_BASE, SZ_4K),
+	__IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K),
 };
 
 static struct platform_device *u5500_platform_devs[] __initdata = {

arch/arm/mach-ux500/include/mach/uncompress.h

@@ -30,22 +30,22 @@
 static void putc(const char c)
 {
 	/* Do nothing if the UART is not enabled. */
-	if (!(readb(U8500_UART_CR) & 0x1))
+	if (!(__raw_readb(U8500_UART_CR) & 0x1))
 		return;
 
 	if (c == '\n')
 		putc('\r');
 
-	while (readb(U8500_UART_FR) & (1 << 5))
+	while (__raw_readb(U8500_UART_FR) & (1 << 5))
 		barrier();
-	writeb(c, U8500_UART_DR);
+	__raw_writeb(c, U8500_UART_DR);
 }
 
 static void flush(void)
 {
-	if (!(readb(U8500_UART_CR) & 0x1))
+	if (!(__raw_readb(U8500_UART_CR) & 0x1))
 		return;
-	while (readb(U8500_UART_FR) & (1 << 3))
+	while (__raw_readb(U8500_UART_FR) & (1 << 3))
 		barrier();
 }
 

arch/arm/mach-vexpress/v2m.c

@@ -241,7 +241,7 @@ static struct platform_device v2m_flash_device = {
 
 static unsigned int v2m_mmci_status(struct device *dev)
 {
-	return !(readl(MMIO_P2V(V2M_SYS_MCI)) & (1 << 0));
+	return readl(MMIO_P2V(V2M_SYS_MCI)) & (1 << 0);
 }
 
 static struct mmci_platform_data v2m_mmci_data = {

arch/arm/mach-w90x900/cpu.c

@@ -93,7 +93,7 @@ static struct clk_lookup nuc900_clkregs[] = {
 	DEF_CLKLOOK(&clk_kpi, "nuc900-kpi", NULL),
 	DEF_CLKLOOK(&clk_wdt, "nuc900-wdt", NULL),
 	DEF_CLKLOOK(&clk_gdma, "nuc900-gdma", NULL),
-	DEF_CLKLOOK(&clk_adc, "nuc900-adc", NULL),
+	DEF_CLKLOOK(&clk_adc, "nuc900-ts", NULL),
 	DEF_CLKLOOK(&clk_usi, "nuc900-spi", NULL),
 	DEF_CLKLOOK(&clk_ext, NULL, "ext"),
 	DEF_CLKLOOK(&clk_timer0, NULL, "timer0"),

arch/arm/mm/cache-l2x0.c

@@ -32,14 +32,14 @@ static uint32_t l2x0_way_mask;	/* Bitmask of active ways */
 static inline void cache_wait(void __iomem *reg, unsigned long mask)
 {
 	/* wait for the operation to complete */
-	while (readl(reg) & mask)
+	while (readl_relaxed(reg) & mask)
 		;
 }
 
 static inline void cache_sync(void)
 {
 	void __iomem *base = l2x0_base;
-	writel(0, base + L2X0_CACHE_SYNC);
+	writel_relaxed(0, base + L2X0_CACHE_SYNC);
 	cache_wait(base + L2X0_CACHE_SYNC, 1);
 }
 
@@ -47,14 +47,14 @@ static inline void l2x0_clean_line(unsigned long addr)
 {
 	void __iomem *base = l2x0_base;
 	cache_wait(base + L2X0_CLEAN_LINE_PA, 1);
-	writel(addr, base + L2X0_CLEAN_LINE_PA);
+	writel_relaxed(addr, base + L2X0_CLEAN_LINE_PA);
 }
 
 static inline void l2x0_inv_line(unsigned long addr)
 {
 	void __iomem *base = l2x0_base;
 	cache_wait(base + L2X0_INV_LINE_PA, 1);
-	writel(addr, base + L2X0_INV_LINE_PA);
+	writel_relaxed(addr, base + L2X0_INV_LINE_PA);
 }
 
 #ifdef CONFIG_PL310_ERRATA_588369
@@ -75,9 +75,9 @@ static inline void l2x0_flush_line(unsigned long addr)
 
 	/* Clean by PA followed by Invalidate by PA */
 	cache_wait(base + L2X0_CLEAN_LINE_PA, 1);
-	writel(addr, base + L2X0_CLEAN_LINE_PA);
+	writel_relaxed(addr, base + L2X0_CLEAN_LINE_PA);
 	cache_wait(base + L2X0_INV_LINE_PA, 1);
-	writel(addr, base + L2X0_INV_LINE_PA);
+	writel_relaxed(addr, base + L2X0_INV_LINE_PA);
 }
 #else
 
@@ -90,7 +90,7 @@ static inline void l2x0_flush_line(unsigned long addr)
 {
 	void __iomem *base = l2x0_base;
 	cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1);
-	writel(addr, base + L2X0_CLEAN_INV_LINE_PA);
+	writel_relaxed(addr, base + L2X0_CLEAN_INV_LINE_PA);
 }
 #endif
 
@@ -109,7 +109,7 @@ static inline void l2x0_inv_all(void)
 
 	/* invalidate all ways */
 	spin_lock_irqsave(&l2x0_lock, flags);
-	writel(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
+	writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY);
 	cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask);
 	cache_sync();
 	spin_unlock_irqrestore(&l2x0_lock, flags);
@@ -215,8 +215,11 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
 
 	l2x0_base = base;
 
-	cache_id = readl(l2x0_base + L2X0_CACHE_ID);
-	aux = readl(l2x0_base + L2X0_AUX_CTRL);
+	cache_id = readl_relaxed(l2x0_base + L2X0_CACHE_ID);
+	aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL);
+
+	aux &= aux_mask;
+	aux |= aux_val;
 
 	/* Determine the number of ways */
 	switch (cache_id & L2X0_CACHE_ID_PART_MASK) {
@@ -245,17 +248,15 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
 	 * If you are booting from non-secure mode
 	 * accessing the below registers will fault.
 	 */
-	if (!(readl(l2x0_base + L2X0_CTRL) & 1)) {
+	if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) {
 
 		/* l2x0 controller is disabled */
-		aux &= aux_mask;
-		aux |= aux_val;
-		writel(aux, l2x0_base + L2X0_AUX_CTRL);
+		writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL);
 
 		l2x0_inv_all();
 
 		/* enable L2X0 */
-		writel(1, l2x0_base + L2X0_CTRL);
+		writel_relaxed(1, l2x0_base + L2X0_CTRL);
 	}
 
 	outer_cache.inv_range = l2x0_inv_range;

arch/arm/mm/highmem.c

@@ -163,19 +163,22 @@ static DEFINE_PER_CPU(int, kmap_high_l1_vipt_depth);
 
 void *kmap_high_l1_vipt(struct page *page, pte_t *saved_pte)
 {
-	unsigned int idx, cpu = smp_processor_id();
-	int *depth = &per_cpu(kmap_high_l1_vipt_depth, cpu);
+	unsigned int idx, cpu;
+	int *depth;
 	unsigned long vaddr, flags;
 	pte_t pte, *ptep;
 
+	if (!in_interrupt())
+		preempt_disable();
+
+	cpu = smp_processor_id();
+	depth = &per_cpu(kmap_high_l1_vipt_depth, cpu);
+
 	idx = KM_L1_CACHE + KM_TYPE_NR * cpu;
 	vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
 	ptep = TOP_PTE(vaddr);
 	pte = mk_pte(page, kmap_prot);
 
-	if (!in_interrupt())
-		preempt_disable();
-
 	raw_local_irq_save(flags);
 	(*depth)++;
 	if (pte_val(*ptep) == pte_val(pte)) {

arch/arm/plat-spear/include/plat/debug-macro.S

@@ -17,8 +17,8 @@
 		.macro	addruart, rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1					@ MMU enabled?
-		moveq	\rx, =SPEAR_DBG_UART_BASE		@ Physical base
-		movne	\rx, =VA_SPEAR_DBG_UART_BASE		@ Virtual base
+		moveq	\rx, #SPEAR_DBG_UART_BASE		@ Physical base
+		movne	\rx, #VA_SPEAR_DBG_UART_BASE		@ Virtual base
 		.endm
 
 		.macro	senduart, rd, rx

arch/arm/tools/mach-types

@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Sat May 1 10:36:42 2010
+# Last update: Mon Jul 12 21:10:14 2010
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1994,7 +1994,7 @@ spark			MACH_SPARK		SPARK			2002
 benzina			MACH_BENZINA		BENZINA			2003
 blaze			MACH_BLAZE		BLAZE			2004
 linkstation_ls_hgl	MACH_LINKSTATION_LS_HGL	LINKSTATION_LS_HGL	2005
-htckovsky		MACH_HTCVENUS		HTCVENUS		2006
+htckovsky		MACH_HTCKOVSKY		HTCKOVSKY		2006
 sony_prs505		MACH_SONY_PRS505	SONY_PRS505		2007
 hanlin_v3		MACH_HANLIN_V3		HANLIN_V3		2008
 sapphira		MACH_SAPPHIRA		SAPPHIRA		2009
@@ -2609,7 +2609,7 @@ fujitsu_tvstbsoc1	MACH_FUJITSU_TVSTBSOC1	FUJITSU_TVSTBSOC1	2621
 lexikon			MACH_LEXIKON		LEXIKON			2622
 mini2440v2		MACH_MINI2440V2		MINI2440V2		2623
 icontrol		MACH_ICONTROL		ICONTROL		2624
-sheevad			MACH_SHEEVAD		SHEEVAD			2625
+gplugd			MACH_SHEEVAD		SHEEVAD			2625
 qsd8x50a_st1_1		MACH_QSD8X50A_ST1_1	QSD8X50A_ST1_1		2626
 qsd8x50a_st1_5		MACH_QSD8X50A_ST1_5	QSD8X50A_ST1_5		2627
 bee			MACH_BEE		BEE			2628
@@ -2804,3 +2804,149 @@ teton_bga		MACH_TETON_BGA		TETON_BGA		2816
 snapper9g45		MACH_SNAPPER9G45	SNAPPER9G45		2817
 tam3517			MACH_TAM3517		TAM3517			2818
 pdc100			MACH_PDC100		PDC100			2819
+eukrea_cpuimx25sd	MACH_EUKREA_CPUIMX25	EUKREA_CPUIMX25		2820
+eukrea_cpuimx35sd	MACH_EUKREA_CPUIMX35	EUKREA_CPUIMX35		2821
+eukrea_cpuimx51sd	MACH_EUKREA_CPUIMX51SD	EUKREA_CPUIMX51SD	2822
+eukrea_cpuimx51		MACH_EUKREA_CPUIMX51	EUKREA_CPUIMX51		2823
+p565			MACH_P565		P565			2824
+acer_a4			MACH_ACER_A4		ACER_A4			2825
+davinci_dm368_bip	MACH_DAVINCI_DM368_BIP	DAVINCI_DM368_BIP	2826
+eshare			MACH_ESHARE		ESHARE			2827
+hw_omapl138_europa	MACH_HW_OMAPL138_EUROPA	HW_OMAPL138_EUROPA	2828
+wlbargn			MACH_WLBARGN		WLBARGN			2829
+bm170			MACH_BM170		BM170			2830
+netspace_mini_v2	MACH_NETSPACE_MINI_V2	NETSPACE_MINI_V2	2831
+netspace_plug_v2	MACH_NETSPACE_PLUG_V2	NETSPACE_PLUG_V2	2832
+siemens_l1		MACH_SIEMENS_L1		SIEMENS_L1		2833
+elv_lcu1		MACH_ELV_LCU1		ELV_LCU1		2834
+mcu1			MACH_MCU1		MCU1			2835
+omap3_tao3530		MACH_OMAP3_TAO3530	OMAP3_TAO3530		2836
+omap3_pcutouch		MACH_OMAP3_PCUTOUCH	OMAP3_PCUTOUCH		2837
+smdkc210		MACH_SMDKC210		SMDKC210		2838
+omap3_braillo		MACH_OMAP3_BRAILLO	OMAP3_BRAILLO		2839
+spyplug			MACH_SPYPLUG		SPYPLUG			2840
+ginger			MACH_GINGER		GINGER			2841
+tny_t3530		MACH_TNY_T3530		TNY_T3530		2842
+pca102			MACH_PCA102		PCA102			2843
+spade			MACH_SPADE		SPADE			2844
+mxc25_topaz		MACH_MXC25_TOPAZ	MXC25_TOPAZ		2845
+t5325			MACH_T5325		T5325			2846
+gw2361			MACH_GW2361		GW2361			2847
+elog			MACH_ELOG		ELOG			2848
+income			MACH_INCOME		INCOME			2849
+bcm589x			MACH_BCM589X		BCM589X			2850
+etna			MACH_ETNA		ETNA			2851
+hawks			MACH_HAWKS		HAWKS			2852
+meson			MACH_MESON		MESON			2853
+xsbase255		MACH_XSBASE255		XSBASE255		2854
+pvm2030			MACH_PVM2030		PVM2030			2855
+mioa502			MACH_MIOA502		MIOA502			2856
+vvbox_sdorig2		MACH_VVBOX_SDORIG2	VVBOX_SDORIG2		2857
+vvbox_sdlite2		MACH_VVBOX_SDLITE2	VVBOX_SDLITE2		2858
+vvbox_sdpro4		MACH_VVBOX_SDPRO4	VVBOX_SDPRO4		2859
+htc_spv_m700		MACH_HTC_SPV_M700	HTC_SPV_M700		2860
+mx257sx			MACH_MX257SX		MX257SX			2861
+goni			MACH_GONI		GONI			2862
+msm8x55_svlte_ffa	MACH_MSM8X55_SVLTE_FFA	MSM8X55_SVLTE_FFA	2863
+msm8x55_svlte_surf	MACH_MSM8X55_SVLTE_SURF	MSM8X55_SVLTE_SURF	2864
+quickstep		MACH_QUICKSTEP		QUICKSTEP		2865
+dmw96			MACH_DMW96		DMW96			2866
+hammerhead		MACH_HAMMERHEAD		HAMMERHEAD		2867
+trident			MACH_TRIDENT		TRIDENT			2868
+lightning		MACH_LIGHTNING		LIGHTNING		2869
+iconnect		MACH_ICONNECT		ICONNECT		2870
+autobot			MACH_AUTOBOT		AUTOBOT			2871
+coconut			MACH_COCONUT		COCONUT			2872
+durian			MACH_DURIAN		DURIAN			2873
+cayenne			MACH_CAYENNE		CAYENNE			2874
+fuji			MACH_FUJI		FUJI			2875
+synology_6282		MACH_SYNOLOGY_6282	SYNOLOGY_6282		2876
+em1sy			MACH_EM1SY		EM1SY			2877
+m502			MACH_M502		M502			2878
+matrix518		MACH_MATRIX518		MATRIX518		2879
+tiny_gurnard		MACH_TINY_GURNARD	TINY_GURNARD		2880
+spear1310		MACH_SPEAR1310		SPEAR1310		2881
+bv07			MACH_BV07		BV07			2882
+mxt_td61		MACH_MXT_TD61		MXT_TD61		2883
+openrd_ultimate		MACH_OPENRD_ULTIMATE	OPENRD_ULTIMATE		2884
+devixp			MACH_DEVIXP		DEVIXP			2885
+miccpt			MACH_MICCPT		MICCPT			2886
+mic256			MACH_MIC256		MIC256			2887
+as1167			MACH_AS1167		AS1167			2888
+omap3_ibiza		MACH_OMAP3_IBIZA	OMAP3_IBIZA		2889
+u5500			MACH_U5500		U5500			2890
+davinci_picto		MACH_DAVINCI_PICTO	DAVINCI_PICTO		2891
+mecha			MACH_MECHA		MECHA			2892
+bubba3			MACH_BUBBA3		BUBBA3			2893
+pupitre			MACH_PUPITRE		PUPITRE			2894
+tegra_harmony		MACH_TEGRA_HARMONY	TEGRA_HARMONY		2895
+tegra_vogue		MACH_TEGRA_VOGUE	TEGRA_VOGUE		2896
+tegra_e1165		MACH_TEGRA_E1165	TEGRA_E1165		2897
+simplenet		MACH_SIMPLENET		SIMPLENET		2898
+ec4350tbm		MACH_EC4350TBM		EC4350TBM		2899
+pec_tc			MACH_PEC_TC		PEC_TC			2900
+pec_hc2			MACH_PEC_HC2		PEC_HC2			2901
+esl_mobilis_a		MACH_ESL_MOBILIS_A	ESL_MOBILIS_A		2902
+esl_mobilis_b		MACH_ESL_MOBILIS_B	ESL_MOBILIS_B		2903
+esl_wave_a		MACH_ESL_WAVE_A		ESL_WAVE_A		2904
+esl_wave_b		MACH_ESL_WAVE_B		ESL_WAVE_B		2905
+unisense_mmm		MACH_UNISENSE_MMM	UNISENSE_MMM		2906
+blueshark		MACH_BLUESHARK		BLUESHARK		2907
+e10			MACH_E10		E10			2908
+app3k_robin		MACH_APP3K_ROBIN	APP3K_ROBIN		2909
+pov15hd			MACH_POV15HD		POV15HD			2910
+stella			MACH_STELLA		STELLA			2911
+linkstation_lschl	MACH_LINKSTATION_LSCHL	LINKSTATION_LSCHL	2913
+netwalker		MACH_NETWALKER		NETWALKER		2914
+acsx106			MACH_ACSX106		ACSX106			2915
+atlas5_c1		MACH_ATLAS5_C1		ATLAS5_C1		2916
+nsb3ast			MACH_NSB3AST		NSB3AST			2917
+gnet_slc		MACH_GNET_SLC		GNET_SLC		2918
+af4000			MACH_AF4000		AF4000			2919
+ark9431			MACH_ARK9431		ARK9431			2920
+fs_s5pc100		MACH_FS_S5PC100		FS_S5PC100		2921
+omap3505nova8		MACH_OMAP3505NOVA8	OMAP3505NOVA8		2922
+omap3621_edp1		MACH_OMAP3621_EDP1	OMAP3621_EDP1		2923
+oratisaes		MACH_ORATISAES		ORATISAES		2924
+smdkv310		MACH_SMDKV310		SMDKV310		2925
+siemens_l0		MACH_SIEMENS_L0		SIEMENS_L0		2926
+ventana			MACH_VENTANA		VENTANA			2927
+wm8505_7in_netbook	MACH_WM8505_7IN_NETBOOK	WM8505_7IN_NETBOOK	2928
+ec4350sdb		MACH_EC4350SDB		EC4350SDB		2929
+mimas			MACH_MIMAS		MIMAS			2930
+titan			MACH_TITAN		TITAN			2931
+craneboard		MACH_CRANEBOARD		CRANEBOARD		2932
+es2440			MACH_ES2440		ES2440			2933
+najay_a9263		MACH_NAJAY_A9263	NAJAY_A9263		2934
+htctornado		MACH_HTCTORNADO		HTCTORNADO		2935
+dimm_mx257		MACH_DIMM_MX257		DIMM_MX257		2936
+jigen301		MACH_JIGEN		JIGEN			2937
+smdk6450		MACH_SMDK6450		SMDK6450		2938
+meno_qng		MACH_MENO_QNG		MENO_QNG		2939
+ns2416			MACH_NS2416		NS2416			2940
+rpc353			MACH_RPC353		RPC353			2941
+tq6410			MACH_TQ6410		TQ6410			2942
+sky6410			MACH_SKY6410		SKY6410			2943
+dynasty			MACH_DYNASTY		DYNASTY			2944
+vivo			MACH_VIVO		VIVO			2945
+bury_bl7582		MACH_BURY_BL7582	BURY_BL7582		2946
+bury_bps5270		MACH_BURY_BPS5270	BURY_BPS5270		2947
+basi			MACH_BASI		BASI			2948
+tn200			MACH_TN200		TN200			2949
+c2mmi			MACH_C2MMI		C2MMI			2950
+meson_6236m		MACH_MESON_6236M	MESON_6236M		2951
+meson_8626m		MACH_MESON_8626M	MESON_8626M		2952
+tube			MACH_TUBE		TUBE			2953
+messina			MACH_MESSINA		MESSINA			2954
+mx50_arm2		MACH_MX50_ARM2		MX50_ARM2		2955
+cetus9263		MACH_CETUS9263		CETUS9263		2956
+brownstone		MACH_BROWNSTONE		BROWNSTONE		2957
+vmx25			MACH_VMX25		VMX25			2958
+vmx51			MACH_VMX51		VMX51			2959
+abacus			MACH_ABACUS		ABACUS			2960
+cm4745			MACH_CM4745		CM4745			2961
+oratislink		MACH_ORATISLINK		ORATISLINK		2962
+davinci_dm365_dvr	MACH_DAVINCI_DM365_DVR	DAVINCI_DM365_DVR	2963
+netviz			MACH_NETVIZ		NETVIZ			2964
+flexibity		MACH_FLEXIBITY		FLEXIBITY		2965
+wlan_computer		MACH_WLAN_COMPUTER	WLAN_COMPUTER		2966

arch/avr32/include/asm/ioctls.h

@@ -54,6 +54,9 @@
 #define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
 #define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
 
+#define TIOCGRS485      0x542E
+#define TIOCSRS485      0x542F
+
 #define FIONCLEX	0x5450
 #define FIOCLEX		0x5451
 #define FIOASYNC	0x5452

arch/avr32/mach-at32ap/include/mach/board.h

@@ -5,6 +5,7 @@
 #define __ASM_ARCH_BOARD_H
 
 #include <linux/types.h>
+#include <linux/serial.h>
 
 #define GPIO_PIN_NONE	(-1)
 
@@ -35,6 +36,7 @@ struct atmel_uart_data {
 	short		use_dma_tx;	/* use transmit DMA? */
 	short		use_dma_rx;	/* use receive DMA? */
 	void __iomem	*regs;		/* virtual base address, if any */
+	struct serial_rs485	rs485;		/* rs485 settings */
 };
 void at32_map_usart(unsigned int hw_id, unsigned int line, int flags);
 struct platform_device *at32_add_device_usart(unsigned int id);

arch/microblaze/Kconfig

@@ -5,7 +5,7 @@ mainmenu "Linux/Microblaze Kernel Configuration"
 
 config MICROBLAZE
 	def_bool y
-	select HAVE_LMB
+	select HAVE_MEMBLOCK
 	select HAVE_FUNCTION_TRACER
 	select HAVE_FUNCTION_TRACE_MCOUNT_TEST
 	select HAVE_FUNCTION_GRAPH_TRACER

arch/microblaze/include/asm/memblock.h

@@ -6,12 +6,12 @@
  * for more details.
  */
 
-#ifndef _ASM_MICROBLAZE_LMB_H
-#define _ASM_MICROBLAZE_LMB_H
+#ifndef _ASM_MICROBLAZE_MEMBLOCK_H
+#define _ASM_MICROBLAZE_MEMBLOCK_H
 
-/* LMB limit is OFF */
-#define LMB_REAL_LIMIT	0xFFFFFFFF
+/* MEMBLOCK limit is OFF */
+#define MEMBLOCK_REAL_LIMIT	0xFFFFFFFF
 
-#endif /* _ASM_MICROBLAZE_LMB_H */
+#endif /* _ASM_MICROBLAZE_MEMBLOCK_H */
 
 

arch/microblaze/kernel/prom.c

@@ -29,7 +29,7 @@
 #include <linux/kexec.h>
 #include <linux/debugfs.h>
 #include <linux/irq.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/prom.h>
 #include <asm/page.h>
@@ -49,12 +49,12 @@ void __init early_init_dt_scan_chosen_arch(unsigned long node)
 
 void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 {
-	lmb_add(base, size);
+	memblock_add(base, size);
 }
 
 u64 __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
 {
-	return lmb_alloc(size, align);
+	return memblock_alloc(size, align);
 }
 
 #ifdef CONFIG_EARLY_PRINTK
@@ -104,8 +104,8 @@ void __init early_init_devtree(void *params)
 	 */
 	of_scan_flat_dt(early_init_dt_scan_chosen, NULL);
 
-	/* Scan memory nodes and rebuild LMBs */
-	lmb_init();
+	/* Scan memory nodes and rebuild MEMBLOCKs */
+	memblock_init();
 	of_scan_flat_dt(early_init_dt_scan_root, NULL);
 	of_scan_flat_dt(early_init_dt_scan_memory, NULL);
 
@@ -113,9 +113,9 @@ void __init early_init_devtree(void *params)
 	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
 	parse_early_param();
 
-	lmb_analyze();
+	memblock_analyze();
 
-	pr_debug("Phys. mem: %lx\n", (unsigned long) lmb_phys_mem_size());
+	pr_debug("Phys. mem: %lx\n", (unsigned long) memblock_phys_mem_size());
 
 	pr_debug(" <- early_init_devtree()\n");
 }

arch/microblaze/mm/init.c

@@ -10,7 +10,7 @@
 #include <linux/bootmem.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/mm.h> /* mem_init */
 #include <linux/initrd.h>
 #include <linux/pagemap.h>
@@ -76,10 +76,10 @@ void __init setup_memory(void)
 	u32 kernel_align_start, kernel_align_size;
 
 	/* Find main memory where is the kernel */
-	for (i = 0; i < lmb.memory.cnt; i++) {
-		memory_start = (u32) lmb.memory.region[i].base;
-		memory_end = (u32) lmb.memory.region[i].base
-				+ (u32) lmb.memory.region[i].size;
+	for (i = 0; i < memblock.memory.cnt; i++) {
+		memory_start = (u32) memblock.memory.region[i].base;
+		memory_end = (u32) memblock.memory.region[i].base
+				+ (u32) memblock.memory.region[i].size;
 		if ((memory_start <= (u32)_text) &&
 					((u32)_text <= memory_end)) {
 			memory_size = memory_end - memory_start;
@@ -100,7 +100,7 @@ void __init setup_memory(void)
 	kernel_align_start = PAGE_DOWN((u32)_text);
 	/* ALIGN can be remove because _end in vmlinux.lds.S is align */
 	kernel_align_size = PAGE_UP((u32)klimit) - kernel_align_start;
-	lmb_reserve(kernel_align_start, kernel_align_size);
+	memblock_reserve(kernel_align_start, kernel_align_size);
 	printk(KERN_INFO "%s: kernel addr=0x%08x-0x%08x size=0x%08x\n",
 		__func__, kernel_align_start, kernel_align_start
 			+ kernel_align_size, kernel_align_size);
@@ -141,18 +141,18 @@ void __init setup_memory(void)
 	map_size = init_bootmem_node(&contig_page_data,
 		PFN_UP(TOPHYS((u32)klimit)), min_low_pfn, max_low_pfn);
 #endif
-	lmb_reserve(PFN_UP(TOPHYS((u32)klimit)) << PAGE_SHIFT, map_size);
+	memblock_reserve(PFN_UP(TOPHYS((u32)klimit)) << PAGE_SHIFT, map_size);
 
 	/* free bootmem is whole main memory */
 	free_bootmem(memory_start, memory_size);
 
 	/* reserve allocate blocks */
-	for (i = 0; i < lmb.reserved.cnt; i++) {
+	for (i = 0; i < memblock.reserved.cnt; i++) {
 		pr_debug("reserved %d - 0x%08x-0x%08x\n", i,
-			(u32) lmb.reserved.region[i].base,
-			(u32) lmb_size_bytes(&lmb.reserved, i));
-		reserve_bootmem(lmb.reserved.region[i].base,
-			lmb_size_bytes(&lmb.reserved, i) - 1, BOOTMEM_DEFAULT);
+			(u32) memblock.reserved.region[i].base,
+			(u32) memblock_size_bytes(&memblock.reserved, i));
+		reserve_bootmem(memblock.reserved.region[i].base,
+			memblock_size_bytes(&memblock.reserved, i) - 1, BOOTMEM_DEFAULT);
 	}
 #ifdef CONFIG_MMU
 	init_bootmem_done = 1;
@@ -235,7 +235,7 @@ static void mm_cmdline_setup(void)
 		if (maxmem && memory_size > maxmem) {
 			memory_size = maxmem;
 			memory_end = memory_start + memory_size;
-			lmb.memory.region[0].size = memory_size;
+			memblock.memory.region[0].size = memory_size;
 		}
 	}
 }
@@ -273,19 +273,19 @@ asmlinkage void __init mmu_init(void)
 {
 	unsigned int kstart, ksize;
 
-	if (!lmb.reserved.cnt) {
+	if (!memblock.reserved.cnt) {
 		printk(KERN_EMERG "Error memory count\n");
 		machine_restart(NULL);
 	}
 
-	if ((u32) lmb.memory.region[0].size < 0x1000000) {
+	if ((u32) memblock.memory.region[0].size < 0x1000000) {
 		printk(KERN_EMERG "Memory must be greater than 16MB\n");
 		machine_restart(NULL);
 	}
 	/* Find main memory where the kernel is */
-	memory_start = (u32) lmb.memory.region[0].base;
-	memory_end = (u32) lmb.memory.region[0].base +
-				(u32) lmb.memory.region[0].size;
+	memory_start = (u32) memblock.memory.region[0].base;
+	memory_end = (u32) memblock.memory.region[0].base +
+				(u32) memblock.memory.region[0].size;
 	memory_size = memory_end - memory_start;
 
 	mm_cmdline_setup(); /* FIXME parse args from command line - not used */
@@ -297,7 +297,7 @@ asmlinkage void __init mmu_init(void)
 	kstart = __pa(CONFIG_KERNEL_START); /* kernel start */
 	/* kernel size */
 	ksize = PAGE_ALIGN(((u32)_end - (u32)CONFIG_KERNEL_START));
-	lmb_reserve(kstart, ksize);
+	memblock_reserve(kstart, ksize);
 
 #if defined(CONFIG_BLK_DEV_INITRD)
 	/* Remove the init RAM disk from the available memory. */
@@ -335,7 +335,7 @@ void __init *early_get_page(void)
 		 * Mem start + 32MB -> here is limit
 		 * because of mem mapping from head.S
 		 */
-		p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE,
+		p = __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE,
 					memory_start + 0x2000000));
 	}
 	return p;

arch/mips/alchemy/common/platform.c

@@ -435,20 +435,21 @@ static struct platform_device *au1xxx_platform_devices[] __initdata = {
 static int __init au1xxx_platform_init(void)
 {
 	unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
-	int i;
+	int err, i;
 
 	/* Fill up uartclk. */
 	for (i = 0; au1x00_uart_data[i].flags; i++)
 		au1x00_uart_data[i].uartclk = uartclk;
 
+	err = platform_add_devices(au1xxx_platform_devices,
+				   ARRAY_SIZE(au1xxx_platform_devices));
 #ifndef CONFIG_SOC_AU1100
 	/* Register second MAC if enabled in pinfunc */
-	if (!(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2))
+	if (!err && !(au_readl(SYS_PINFUNC) & (u32)SYS_PF_NI2))
 		platform_device_register(&au1xxx_eth1_device);
 #endif
 
-	return platform_add_devices(au1xxx_platform_devices,
-				    ARRAY_SIZE(au1xxx_platform_devices));
+	return err;
 }
 
 arch_initcall(au1xxx_platform_init);

arch/mips/alchemy/mtx-1/board_setup.c

@@ -67,8 +67,6 @@ static void mtx1_power_off(void)
 
 void __init board_setup(void)
 {
-	alchemy_gpio2_enable();
-
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 	/* Enable USB power switch */
 	alchemy_gpio_direction_output(204, 0);
@@ -117,11 +115,11 @@ mtx1_pci_idsel(unsigned int devsel, int assert)
 
 	if (assert && devsel != 0)
 		/* Suppress signal to Cardbus */
-		gpio_set_value(1, 0);	/* set EXT_IO3 OFF */
+		alchemy_gpio_set_value(1, 0);	/* set EXT_IO3 OFF */
 	else
-		gpio_set_value(1, 1);	/* set EXT_IO3 ON */
+		alchemy_gpio_set_value(1, 1);	/* set EXT_IO3 ON */
 
-	au_sync_udelay(1);
+	udelay(1);
 	return 1;
 }
 

arch/mips/bcm63xx/dev-enet.c

@@ -104,6 +104,9 @@ int __init bcm63xx_enet_register(int unit,
 	if (unit > 1)
 		return -ENODEV;
 
+	if (unit == 1 && BCMCPU_IS_6338())
+		return -ENODEV;
+
 	if (!shared_device_registered) {
 		shared_res[0].start = bcm63xx_regset_address(RSET_ENETDMA);
 		shared_res[0].end = shared_res[0].start;

arch/mips/include/asm/atomic.h

@@ -434,7 +434,7 @@ static __inline__ void atomic64_add(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%0, %1		# atomic64_add		\n"
-		"	addu	%0, %2					\n"
+		"	daddu	%0, %2					\n"
 		"	scd	%0, %1					\n"
 		"	beqzl	%0, 1b					\n"
 		"	.set	mips0					\n"
@@ -446,7 +446,7 @@ static __inline__ void atomic64_add(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%0, %1		# atomic64_add		\n"
-		"	addu	%0, %2					\n"
+		"	daddu	%0, %2					\n"
 		"	scd	%0, %1					\n"
 		"	beqz	%0, 2f					\n"
 		"	.subsection 2					\n"
@@ -479,7 +479,7 @@ static __inline__ void atomic64_sub(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%0, %1		# atomic64_sub		\n"
-		"	subu	%0, %2					\n"
+		"	dsubu	%0, %2					\n"
 		"	scd	%0, %1					\n"
 		"	beqzl	%0, 1b					\n"
 		"	.set	mips0					\n"
@@ -491,7 +491,7 @@ static __inline__ void atomic64_sub(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%0, %1		# atomic64_sub		\n"
-		"	subu	%0, %2					\n"
+		"	dsubu	%0, %2					\n"
 		"	scd	%0, %1					\n"
 		"	beqz	%0, 2f					\n"
 		"	.subsection 2					\n"
@@ -524,10 +524,10 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%1, %2		# atomic64_add_return	\n"
-		"	addu	%0, %1, %3				\n"
+		"	daddu	%0, %1, %3				\n"
 		"	scd	%0, %2					\n"
 		"	beqzl	%0, 1b					\n"
-		"	addu	%0, %1, %3				\n"
+		"	daddu	%0, %1, %3				\n"
 		"	.set	mips0					\n"
 		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter)
@@ -538,10 +538,10 @@ static __inline__ long atomic64_add_return(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%1, %2		# atomic64_add_return	\n"
-		"	addu	%0, %1, %3				\n"
+		"	daddu	%0, %1, %3				\n"
 		"	scd	%0, %2					\n"
 		"	beqz	%0, 2f					\n"
-		"	addu	%0, %1, %3				\n"
+		"	daddu	%0, %1, %3				\n"
 		"	.subsection 2					\n"
 		"2:	b	1b					\n"
 		"	.previous					\n"
@@ -576,10 +576,10 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%1, %2		# atomic64_sub_return	\n"
-		"	subu	%0, %1, %3				\n"
+		"	dsubu	%0, %1, %3				\n"
 		"	scd	%0, %2					\n"
 		"	beqzl	%0, 1b					\n"
-		"	subu	%0, %1, %3				\n"
+		"	dsubu	%0, %1, %3				\n"
 		"	.set	mips0					\n"
 		: "=&r" (result), "=&r" (temp), "=m" (v->counter)
 		: "Ir" (i), "m" (v->counter)
@@ -590,10 +590,10 @@ static __inline__ long atomic64_sub_return(long i, atomic64_t * v)
 		__asm__ __volatile__(
 		"	.set	mips3					\n"
 		"1:	lld	%1, %2		# atomic64_sub_return	\n"
-		"	subu	%0, %1, %3				\n"
+		"	dsubu	%0, %1, %3				\n"
 		"	scd	%0, %2					\n"
 		"	beqz	%0, 2f					\n"
-		"	subu	%0, %1, %3				\n"
+		"	dsubu	%0, %1, %3				\n"
 		"	.subsection 2					\n"
 		"2:	b	1b					\n"
 		"	.previous					\n"

arch/mips/include/asm/unistd.h

@@ -984,16 +984,17 @@
 #define __NR_perf_event_open		(__NR_Linux + 296)
 #define __NR_accept4			(__NR_Linux + 297)
 #define __NR_recvmmsg			(__NR_Linux + 298)
+#define __NR_getdents64			(__NR_Linux + 299)
 
 /*
  * Offset of the last N32 flavoured syscall
  */
-#define __NR_Linux_syscalls		298
+#define __NR_Linux_syscalls		299
 
 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
 
 #define __NR_N32_Linux			6000
-#define __NR_N32_Linux_syscalls		298
+#define __NR_N32_Linux_syscalls		299
 
 #ifdef __KERNEL__
 

arch/mips/kernel/scall64-n32.S

@@ -419,4 +419,5 @@ EXPORT(sysn32_call_table)
 	PTR	sys_perf_event_open
 	PTR	sys_accept4
 	PTR     compat_sys_recvmmsg
+	PTR     sys_getdents
 	.size	sysn32_call_table,.-sysn32_call_table

arch/mips/kernel/vdso.c

@@ -61,11 +61,9 @@ static int __init init_vdso(void)
 
 	vunmap(vdso);
 
-	pr_notice("init_vdso successfull\n");
-
 	return 0;
 }
-device_initcall(init_vdso);
+subsys_initcall(init_vdso);
 
 static unsigned long vdso_addr(unsigned long start)
 {

arch/mips/mti-malta/malta-pci.c

@@ -247,6 +247,8 @@ void __init mips_pcibios_init(void)
 	iomem_resource.end &= 0xfffffffffULL;			/* 64 GB */
 	ioport_resource.end = controller->io_resource->end;
 
+	controller->io_map_base = mips_io_port_base;
+
 	register_pci_controller(controller);
 }
 

arch/mips/nxp/pnx8550/common/pci.c

@@ -44,6 +44,7 @@ extern struct pci_ops pnx8550_pci_ops;
 
 static struct pci_controller pnx8550_controller = {
 	.pci_ops	= &pnx8550_pci_ops,
+	.io_map_base	= PNX8550_PORT_BASE,
 	.io_resource	= &pci_io_resource,
 	.mem_resource	= &pci_mem_resource,
 };

arch/mips/nxp/pnx8550/common/setup.c

@@ -113,7 +113,7 @@ void __init plat_mem_setup(void)
 	PNX8550_GLB2_ENAB_INTA_O = 0;
 
 	/* IO/MEM resources. */
-	set_io_port_base(KSEG1);
+	set_io_port_base(PNX8550_PORT_BASE);
 	ioport_resource.start = 0;
 	ioport_resource.end = ~0;
 	iomem_resource.start = 0;

arch/mips/pci/ops-pmcmsp.c

@@ -944,6 +944,7 @@ static struct pci_controller msp_pci_controller = {
 	.pci_ops	= &msp_pci_ops,
 	.mem_resource	= &pci_mem_resource,
 	.mem_offset	= 0,
+	.io_map_base	= MSP_PCI_IOSPACE_BASE,
 	.io_resource	= &pci_io_resource,
 	.io_offset	= 0
 };

arch/mips/pci/pci-yosemite.c

@@ -54,6 +54,7 @@ static int __init pmc_yosemite_setup(void)
 		panic(ioremap_failed);
 
 	set_io_port_base(io_v_base);
+	py_controller.io_map_base = io_v_base;
 	TITAN_WRITE(RM9000x2_OCD_LKM7, TITAN_READ(RM9000x2_OCD_LKM7) | 1);
 
 	ioport_resource.end = TITAN_IO_SIZE - 1;

arch/mips/powertv/asic/asic_devices.c

@@ -472,6 +472,9 @@ void __init configure_platform(void)
 		 * it*/
 		platform_features = FFS_CAPABLE | DISPLAY_CAPABLE;
 
+		/* Cronus and Cronus Lite have the same register map */
+		set_register_map(CRONUS_IO_BASE, &cronus_register_map);
+
 		/* ASIC version will determine if this is a real CronusLite or
 		 * Castrati(Cronus) */
 		chipversion  = asic_read(chipver3) << 24;
@@ -484,8 +487,6 @@ void __init configure_platform(void)
 		else
 			asic = ASIC_CRONUSLITE;
 
-		/* Cronus and Cronus Lite have the same register map */
-		set_register_map(CRONUS_IO_BASE, &cronus_register_map);
 		gp_resources = non_dvr_cronuslite_resources;
 		pr_info("Platform: 4600 - %s, NON_DVR_CAPABLE, "
 			"chipversion=0x%08X\n",

arch/powerpc/Kconfig

@@ -132,7 +132,7 @@ config PPC
 	select HAVE_ARCH_KGDB
 	select HAVE_KRETPROBES
 	select HAVE_ARCH_TRACEHOOK
-	select HAVE_LMB
+	select HAVE_MEMBLOCK
 	select HAVE_DMA_ATTRS
 	select HAVE_DMA_API_DEBUG
 	select USE_GENERIC_SMP_HELPERS if SMP

arch/powerpc/include/asm/abs_addr.h

@@ -12,7 +12,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/types.h>
 #include <asm/page.h>

arch/powerpc/include/asm/cpm.h

@@ -6,6 +6,30 @@
 #include <linux/errno.h>
 #include <linux/of.h>
 
+/*
+ * SPI Parameter RAM common to QE and CPM.
+ */
+struct spi_pram {
+	__be16	rbase;	/* Rx Buffer descriptor base address */
+	__be16	tbase;	/* Tx Buffer descriptor base address */
+	u8	rfcr;	/* Rx function code */
+	u8	tfcr;	/* Tx function code */
+	__be16	mrblr;	/* Max receive buffer length */
+	__be32	rstate;	/* Internal */
+	__be32	rdp;	/* Internal */
+	__be16	rbptr;	/* Internal */
+	__be16	rbc;	/* Internal */
+	__be32	rxtmp;	/* Internal */
+	__be32	tstate;	/* Internal */
+	__be32	tdp;	/* Internal */
+	__be16	tbptr;	/* Internal */
+	__be16	tbc;	/* Internal */
+	__be32	txtmp;	/* Internal */
+	__be32	res;	/* Tx temp. */
+	__be16  rpbase;	/* Relocation pointer (CPM1 only) */
+	__be16	res1;	/* Reserved */
+};
+
 /*
  * USB Controller pram common to QE and CPM.
  */

arch/powerpc/include/asm/cpm1.h

@@ -17,6 +17,7 @@
 #ifndef __CPM1__
 #define __CPM1__
 
+#include <linux/init.h>
 #include <asm/8xx_immap.h>
 #include <asm/ptrace.h>
 #include <asm/cpm.h>
@@ -54,7 +55,7 @@ extern cpm8xx_t __iomem *cpmp; /* Pointer to comm processor */
 
 extern void cpm_setbrg(uint brg, uint rate);
 
-extern void cpm_load_patch(cpm8xx_t *cp);
+extern void __init cpm_load_patch(cpm8xx_t *cp);
 
 extern void cpm_reset(void);
 

arch/powerpc/include/asm/kexec.h

@@ -8,9 +8,9 @@
  * On FSL-BookE we setup a 1:1 mapping which covers the first 2GiB of memory
  * and therefore we can only deal with memory within this range
  */
-#define KEXEC_SOURCE_MEMORY_LIMIT	(2 * 1024 * 1024 * 1024UL)
-#define KEXEC_DESTINATION_MEMORY_LIMIT	(2 * 1024 * 1024 * 1024UL)
-#define KEXEC_CONTROL_MEMORY_LIMIT	(2 * 1024 * 1024 * 1024UL)
+#define KEXEC_SOURCE_MEMORY_LIMIT	(2 * 1024 * 1024 * 1024UL - 1)
+#define KEXEC_DESTINATION_MEMORY_LIMIT	(2 * 1024 * 1024 * 1024UL - 1)
+#define KEXEC_CONTROL_MEMORY_LIMIT	(2 * 1024 * 1024 * 1024UL - 1)
 
 #else
 

arch/powerpc/include/asm/lmb.h

@@ -1,15 +0,0 @@
-#ifndef _ASM_POWERPC_LMB_H
-#define _ASM_POWERPC_LMB_H
-
-#include <asm/udbg.h>
-
-#define LMB_DBG(fmt...) udbg_printf(fmt)
-
-#ifdef CONFIG_PPC32
-extern phys_addr_t lowmem_end_addr;
-#define LMB_REAL_LIMIT	lowmem_end_addr
-#else
-#define LMB_REAL_LIMIT	0
-#endif
-
-#endif /* _ASM_POWERPC_LMB_H */

arch/powerpc/include/asm/memblock.h

@@ -0,0 +1,15 @@
+#ifndef _ASM_POWERPC_MEMBLOCK_H
+#define _ASM_POWERPC_MEMBLOCK_H
+
+#include <asm/udbg.h>
+
+#define MEMBLOCK_DBG(fmt...) udbg_printf(fmt)
+
+#ifdef CONFIG_PPC32
+extern phys_addr_t lowmem_end_addr;
+#define MEMBLOCK_REAL_LIMIT	lowmem_end_addr
+#else
+#define MEMBLOCK_REAL_LIMIT	0
+#endif
+
+#endif /* _ASM_POWERPC_MEMBLOCK_H */

arch/powerpc/include/asm/mmu-hash64.h

@@ -250,7 +250,9 @@ extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 		     pte_t *ptep, unsigned long trap, int local, int ssize,
 		     unsigned int shift, unsigned int mmu_psize);
-
+extern void hash_failure_debug(unsigned long ea, unsigned long access,
+			       unsigned long vsid, unsigned long trap,
+			       int ssize, int psize, unsigned long pte);
 extern int htab_bolt_mapping(unsigned long vstart, unsigned long vend,
 			     unsigned long pstart, unsigned long prot,
 			     int psize, int ssize);

arch/powerpc/kernel/btext.c

@@ -7,7 +7,7 @@
 #include <linux/string.h>
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/sections.h>
 #include <asm/prom.h>

arch/powerpc/kernel/crash.c

@@ -24,7 +24,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/types.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/processor.h>
 #include <asm/machdep.h>

arch/powerpc/kernel/crash_dump.c

@@ -13,7 +13,7 @@
 
 #include <linux/crash_dump.h>
 #include <linux/bootmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <asm/code-patching.h>
 #include <asm/kdump.h>
 #include <asm/prom.h>
@@ -33,7 +33,7 @@ unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX;
 #ifndef CONFIG_RELOCATABLE
 void __init reserve_kdump_trampoline(void)
 {
-	lmb_reserve(0, KDUMP_RESERVE_LIMIT);
+	memblock_reserve(0, KDUMP_RESERVE_LIMIT);
 }
 
 static void __init create_trampoline(unsigned long addr)

arch/powerpc/kernel/dma-swiotlb.c

@@ -71,7 +71,7 @@ static int ppc_swiotlb_bus_notify(struct notifier_block *nb,
 	sd->max_direct_dma_addr = 0;
 
 	/* May need to bounce if the device can't address all of DRAM */
-	if ((dma_get_mask(dev) + 1) < lmb_end_of_DRAM())
+	if ((dma_get_mask(dev) + 1) < memblock_end_of_DRAM())
 		set_dma_ops(dev, &swiotlb_dma_ops);
 
 	return NOTIFY_DONE;

arch/powerpc/kernel/dma.c

@@ -9,7 +9,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/dma-debug.h>
 #include <linux/gfp.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <asm/bug.h>
 #include <asm/abs_addr.h>
 
@@ -89,7 +89,7 @@ static int dma_direct_dma_supported(struct device *dev, u64 mask)
 	/* Could be improved so platforms can set the limit in case
 	 * they have limited DMA windows
 	 */
-	return mask >= (lmb_end_of_DRAM() - 1);
+	return mask >= (memblock_end_of_DRAM() - 1);
 #else
 	return 1;
 #endif

arch/powerpc/kernel/fsl_booke_entry_mapping.S

@@ -205,8 +205,7 @@ next_tlb_setup:
 	bdnz+   next_tlb_setup
 
 /* 7. Jump to our 1:1 mapping */
-	li	r6, 0
-
+	mr	r6, r25
 #else
 	#error You need to specify the mapping or not use this at all.
 #endif
@@ -217,7 +216,6 @@ next_tlb_setup:
 1:	mflr	r9
 	rlwimi	r6,r9,0,20,31
 	addi	r6,r6,(2f - 1b)
-	add	r6, r6, r25
 	mtspr	SPRN_SRR0,r6
 	mtspr	SPRN_SRR1,r7
 	rfi				/* start execution out of TLB1[0] entry */

arch/powerpc/kernel/machine_kexec.c

@@ -12,7 +12,7 @@
 #include <linux/kexec.h>
 #include <linux/reboot.h>
 #include <linux/threads.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/of.h>
 #include <asm/machdep.h>
 #include <asm/prom.h>
@@ -66,11 +66,11 @@ void __init reserve_crashkernel(void)
 	unsigned long long crash_size, crash_base;
 	int ret;
 
-	/* this is necessary because of lmb_phys_mem_size() */
-	lmb_analyze();
+	/* this is necessary because of memblock_phys_mem_size() */
+	memblock_analyze();
 
 	/* use common parsing */
-	ret = parse_crashkernel(boot_command_line, lmb_phys_mem_size(),
+	ret = parse_crashkernel(boot_command_line, memblock_phys_mem_size(),
 			&crash_size, &crash_base);
 	if (ret == 0 && crash_size > 0) {
 		crashk_res.start = crash_base;
@@ -133,9 +133,9 @@ void __init reserve_crashkernel(void)
 			"for crashkernel (System RAM: %ldMB)\n",
 			(unsigned long)(crash_size >> 20),
 			(unsigned long)(crashk_res.start >> 20),
-			(unsigned long)(lmb_phys_mem_size() >> 20));
+			(unsigned long)(memblock_phys_mem_size() >> 20));
 
-	lmb_reserve(crashk_res.start, crash_size);
+	memblock_reserve(crashk_res.start, crash_size);
 }
 
 int overlaps_crashkernel(unsigned long start, unsigned long size)

arch/powerpc/kernel/paca.c

@@ -9,7 +9,7 @@
 
 #include <linux/threads.h>
 #include <linux/module.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/firmware.h>
 #include <asm/lppaca.h>
@@ -117,7 +117,7 @@ void __init allocate_pacas(void)
 	 * the first segment. On iSeries they must be within the area mapped
 	 * by the HV, which is HvPagesToMap * HVPAGESIZE bytes.
 	 */
-	limit = min(0x10000000ULL, lmb.rmo_size);
+	limit = min(0x10000000ULL, memblock.rmo_size);
 	if (firmware_has_feature(FW_FEATURE_ISERIES))
 		limit = min(limit, HvPagesToMap * HVPAGESIZE);
 
@@ -128,7 +128,7 @@ void __init allocate_pacas(void)
 
 	paca_size = PAGE_ALIGN(sizeof(struct paca_struct) * nr_cpus);
 
-	paca = __va(lmb_alloc_base(paca_size, PAGE_SIZE, limit));
+	paca = __va(memblock_alloc_base(paca_size, PAGE_SIZE, limit));
 	memset(paca, 0, paca_size);
 
 	printk(KERN_DEBUG "Allocated %u bytes for %d pacas at %p\n",
@@ -148,7 +148,7 @@ void __init free_unused_pacas(void)
 	if (new_size >= paca_size)
 		return;
 
-	lmb_free(__pa(paca) + new_size, paca_size - new_size);
+	memblock_free(__pa(paca) + new_size, paca_size - new_size);
 
 	printk(KERN_DEBUG "Freed %u bytes for unused pacas\n",
 		paca_size - new_size);

arch/powerpc/kernel/perf_event_fsl_emb.c

@@ -566,9 +566,9 @@ static void record_and_restart(struct perf_event *event, unsigned long val,
 	 * Finally record data if requested.
 	 */
 	if (record) {
-		struct perf_sample_data data = {
-			.period	= event->hw.last_period,
-		};
+		struct perf_sample_data data;
+
+		perf_sample_data_init(&data, 0);
 
 		if (perf_event_overflow(event, nmi, &data, regs)) {
 			/*

arch/powerpc/kernel/prom.c

@@ -31,7 +31,7 @@
 #include <linux/kexec.h>
 #include <linux/debugfs.h>
 #include <linux/irq.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/prom.h>
 #include <asm/rtas.h>
@@ -98,7 +98,7 @@ static void __init move_device_tree(void)
 
 	if ((memory_limit && (start + size) > memory_limit) ||
 			overlaps_crashkernel(start, size)) {
-		p = __va(lmb_alloc_base(size, PAGE_SIZE, lmb.rmo_size));
+		p = __va(memblock_alloc_base(size, PAGE_SIZE, memblock.rmo_size));
 		memcpy(p, initial_boot_params, size);
 		initial_boot_params = (struct boot_param_header *)p;
 		DBG("Moved device tree to 0x%p\n", p);
@@ -411,13 +411,13 @@ static int __init early_init_dt_scan_drconf_memory(unsigned long node)
 {
 	__be32 *dm, *ls, *usm;
 	unsigned long l, n, flags;
-	u64 base, size, lmb_size;
+	u64 base, size, memblock_size;
 	unsigned int is_kexec_kdump = 0, rngs;
 
 	ls = of_get_flat_dt_prop(node, "ibm,lmb-size", &l);
 	if (ls == NULL || l < dt_root_size_cells * sizeof(__be32))
 		return 0;
-	lmb_size = dt_mem_next_cell(dt_root_size_cells, &ls);
+	memblock_size = dt_mem_next_cell(dt_root_size_cells, &ls);
 
 	dm = of_get_flat_dt_prop(node, "ibm,dynamic-memory", &l);
 	if (dm == NULL || l < sizeof(__be32))
@@ -442,11 +442,11 @@ static int __init early_init_dt_scan_drconf_memory(unsigned long node)
 		   or if the block is not assigned to this partition (0x8) */
 		if ((flags & 0x80) || !(flags & 0x8))
 			continue;
-		size = lmb_size;
+		size = memblock_size;
 		rngs = 1;
 		if (is_kexec_kdump) {
 			/*
-			 * For each lmb in ibm,dynamic-memory, a corresponding
+			 * For each memblock in ibm,dynamic-memory, a corresponding
 			 * entry in linux,drconf-usable-memory property contains
 			 * a counter 'p' followed by 'p' (base, size) duple.
 			 * Now read the counter from
@@ -469,10 +469,10 @@ static int __init early_init_dt_scan_drconf_memory(unsigned long node)
 				if ((base + size) > 0x80000000ul)
 					size = 0x80000000ul - base;
 			}
-			lmb_add(base, size);
+			memblock_add(base, size);
 		} while (--rngs);
 	}
-	lmb_dump_all();
+	memblock_dump_all();
 	return 0;
 }
 #else
@@ -501,14 +501,14 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 	}
 #endif
 
-	lmb_add(base, size);
+	memblock_add(base, size);
 
 	memstart_addr = min((u64)memstart_addr, base);
 }
 
 u64 __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
 {
-	return lmb_alloc(size, align);
+	return memblock_alloc(size, align);
 }
 
 #ifdef CONFIG_BLK_DEV_INITRD
@@ -534,12 +534,12 @@ static void __init early_reserve_mem(void)
 	/* before we do anything, lets reserve the dt blob */
 	self_base = __pa((unsigned long)initial_boot_params);
 	self_size = initial_boot_params->totalsize;
-	lmb_reserve(self_base, self_size);
+	memblock_reserve(self_base, self_size);
 
 #ifdef CONFIG_BLK_DEV_INITRD
 	/* then reserve the initrd, if any */
 	if (initrd_start && (initrd_end > initrd_start))
-		lmb_reserve(__pa(initrd_start), initrd_end - initrd_start);
+		memblock_reserve(__pa(initrd_start), initrd_end - initrd_start);
 #endif /* CONFIG_BLK_DEV_INITRD */
 
 #ifdef CONFIG_PPC32
@@ -560,7 +560,7 @@ static void __init early_reserve_mem(void)
 			if (base_32 == self_base && size_32 == self_size)
 				continue;
 			DBG("reserving: %x -> %x\n", base_32, size_32);
-			lmb_reserve(base_32, size_32);
+			memblock_reserve(base_32, size_32);
 		}
 		return;
 	}
@@ -571,7 +571,7 @@ static void __init early_reserve_mem(void)
 		if (size == 0)
 			break;
 		DBG("reserving: %llx -> %llx\n", base, size);
-		lmb_reserve(base, size);
+		memblock_reserve(base, size);
 	}
 }
 
@@ -594,7 +594,7 @@ static inline unsigned long phyp_dump_calculate_reserve_size(void)
 		return phyp_dump_info->reserve_bootvar;
 
 	/* divide by 20 to get 5% of value */
-	tmp = lmb_end_of_DRAM();
+	tmp = memblock_end_of_DRAM();
 	do_div(tmp, 20);
 
 	/* round it down in multiples of 256 */
@@ -633,11 +633,11 @@ static void __init phyp_dump_reserve_mem(void)
 	if (phyp_dump_info->phyp_dump_is_active) {
 		/* Reserve *everything* above RMR.Area freed by userland tools*/
 		base = variable_reserve_size;
-		size = lmb_end_of_DRAM() - base;
+		size = memblock_end_of_DRAM() - base;
 
 		/* XXX crashed_ram_end is wrong, since it may be beyond
 		 * the memory_limit, it will need to be adjusted. */
-		lmb_reserve(base, size);
+		memblock_reserve(base, size);
 
 		phyp_dump_info->init_reserve_start = base;
 		phyp_dump_info->init_reserve_size = size;
@@ -645,8 +645,8 @@ static void __init phyp_dump_reserve_mem(void)
 		size = phyp_dump_info->cpu_state_size +
 			phyp_dump_info->hpte_region_size +
 			variable_reserve_size;
-		base = lmb_end_of_DRAM() - size;
-		lmb_reserve(base, size);
+		base = memblock_end_of_DRAM() - size;
+		memblock_reserve(base, size);
 		phyp_dump_info->init_reserve_start = base;
 		phyp_dump_info->init_reserve_size = size;
 	}
@@ -681,8 +681,8 @@ void __init early_init_devtree(void *params)
 	 */
 	of_scan_flat_dt(early_init_dt_scan_chosen, NULL);
 
-	/* Scan memory nodes and rebuild LMBs */
-	lmb_init();
+	/* Scan memory nodes and rebuild MEMBLOCKs */
+	memblock_init();
 	of_scan_flat_dt(early_init_dt_scan_root, NULL);
 	of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
 
@@ -690,11 +690,11 @@ void __init early_init_devtree(void *params)
 	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
 	parse_early_param();
 
-	/* Reserve LMB regions used by kernel, initrd, dt, etc... */
-	lmb_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
+	/* Reserve MEMBLOCK regions used by kernel, initrd, dt, etc... */
+	memblock_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
 	/* If relocatable, reserve first 32k for interrupt vectors etc. */
 	if (PHYSICAL_START > MEMORY_START)
-		lmb_reserve(MEMORY_START, 0x8000);
+		memblock_reserve(MEMORY_START, 0x8000);
 	reserve_kdump_trampoline();
 	reserve_crashkernel();
 	early_reserve_mem();
@@ -706,17 +706,17 @@ void __init early_init_devtree(void *params)
 
 		/* Ensure that total memory size is page-aligned, because
 		 * otherwise mark_bootmem() gets upset. */
-		lmb_analyze();
-		memsize = lmb_phys_mem_size();
+		memblock_analyze();
+		memsize = memblock_phys_mem_size();
 		if ((memsize & PAGE_MASK) != memsize)
 			limit = memsize & PAGE_MASK;
 	}
-	lmb_enforce_memory_limit(limit);
+	memblock_enforce_memory_limit(limit);
 
-	lmb_analyze();
-	lmb_dump_all();
+	memblock_analyze();
+	memblock_dump_all();
 
-	DBG("Phys. mem: %llx\n", lmb_phys_mem_size());
+	DBG("Phys. mem: %llx\n", memblock_phys_mem_size());
 
 	/* We may need to relocate the flat tree, do it now.
 	 * FIXME .. and the initrd too? */

arch/powerpc/kernel/rtas.c

@@ -22,7 +22,7 @@
 #include <linux/smp.h>
 #include <linux/completion.h>
 #include <linux/cpumask.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/slab.h>
 
 #include <asm/prom.h>
@@ -934,11 +934,11 @@ void __init rtas_initialize(void)
 	 */
 #ifdef CONFIG_PPC64
 	if (machine_is(pseries) && firmware_has_feature(FW_FEATURE_LPAR)) {
-		rtas_region = min(lmb.rmo_size, RTAS_INSTANTIATE_MAX);
+		rtas_region = min(memblock.rmo_size, RTAS_INSTANTIATE_MAX);
 		ibm_suspend_me_token = rtas_token("ibm,suspend-me");
 	}
 #endif
-	rtas_rmo_buf = lmb_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, rtas_region);
+	rtas_rmo_buf = memblock_alloc_base(RTAS_RMOBUF_MAX, PAGE_SIZE, rtas_region);
 
 #ifdef CONFIG_RTAS_ERROR_LOGGING
 	rtas_last_error_token = rtas_token("rtas-last-error");

arch/powerpc/kernel/setup-common.c

@@ -33,7 +33,7 @@
 #include <linux/serial_8250.h>
 #include <linux/debugfs.h>
 #include <linux/percpu.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/of_platform.h>
 #include <asm/io.h>
 #include <asm/paca.h>

arch/powerpc/kernel/setup_32.c

@@ -16,7 +16,7 @@
 #include <linux/root_dev.h>
 #include <linux/cpu.h>
 #include <linux/console.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/io.h>
 #include <asm/prom.h>
@@ -246,12 +246,12 @@ static void __init irqstack_early_init(void)
 	unsigned int i;
 
 	/* interrupt stacks must be in lowmem, we get that for free on ppc32
-	 * as the lmb is limited to lowmem by LMB_REAL_LIMIT */
+	 * as the memblock is limited to lowmem by MEMBLOCK_REAL_LIMIT */
 	for_each_possible_cpu(i) {
 		softirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 		hardirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 	}
 }
 
@@ -261,15 +261,15 @@ static void __init exc_lvl_early_init(void)
 	unsigned int i;
 
 	/* interrupt stacks must be in lowmem, we get that for free on ppc32
-	 * as the lmb is limited to lowmem by LMB_REAL_LIMIT */
+	 * as the memblock is limited to lowmem by MEMBLOCK_REAL_LIMIT */
 	for_each_possible_cpu(i) {
 		critirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 #ifdef CONFIG_BOOKE
 		dbgirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 		mcheckirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 #endif
 	}
 }

arch/powerpc/kernel/setup_64.c

@@ -34,7 +34,7 @@
 #include <linux/bootmem.h>
 #include <linux/pci.h>
 #include <linux/lockdep.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <asm/io.h>
 #include <asm/kdump.h>
 #include <asm/prom.h>
@@ -158,7 +158,7 @@ static void __init setup_paca(struct paca_struct *new_paca)
  * the CPU that ignores the top 2 bits of the address in real
  * mode so we can access kernel globals normally provided we
  * only toy with things in the RMO region. From here, we do
- * some early parsing of the device-tree to setup out LMB
+ * some early parsing of the device-tree to setup out MEMBLOCK
  * data structures, and allocate & initialize the hash table
  * and segment tables so we can start running with translation
  * enabled.
@@ -404,7 +404,7 @@ void __init setup_system(void)
 
 	printk("-----------------------------------------------------\n");
 	printk("ppc64_pft_size                = 0x%llx\n", ppc64_pft_size);
-	printk("physicalMemorySize            = 0x%llx\n", lmb_phys_mem_size());
+	printk("physicalMemorySize            = 0x%llx\n", memblock_phys_mem_size());
 	if (ppc64_caches.dline_size != 0x80)
 		printk("ppc64_caches.dcache_line_size = 0x%x\n",
 		       ppc64_caches.dline_size);
@@ -443,10 +443,10 @@ static void __init irqstack_early_init(void)
 	 */
 	for_each_possible_cpu(i) {
 		softirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc_base(THREAD_SIZE,
+			__va(memblock_alloc_base(THREAD_SIZE,
 					    THREAD_SIZE, limit));
 		hardirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc_base(THREAD_SIZE,
+			__va(memblock_alloc_base(THREAD_SIZE,
 					    THREAD_SIZE, limit));
 	}
 }
@@ -458,11 +458,11 @@ static void __init exc_lvl_early_init(void)
 
 	for_each_possible_cpu(i) {
 		critirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 		dbgirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 		mcheckirq_ctx[i] = (struct thread_info *)
-			__va(lmb_alloc(THREAD_SIZE, THREAD_SIZE));
+			__va(memblock_alloc(THREAD_SIZE, THREAD_SIZE));
 	}
 }
 #else
@@ -487,11 +487,11 @@ static void __init emergency_stack_init(void)
 	 * bringup, we need to get at them in real mode. This means they
 	 * must also be within the RMO region.
 	 */
-	limit = min(slb0_limit(), lmb.rmo_size);
+	limit = min(slb0_limit(), memblock.rmo_size);
 
 	for_each_possible_cpu(i) {
 		unsigned long sp;
-		sp  = lmb_alloc_base(THREAD_SIZE, THREAD_SIZE, limit);
+		sp  = memblock_alloc_base(THREAD_SIZE, THREAD_SIZE, limit);
 		sp += THREAD_SIZE;
 		paca[i].emergency_sp = __va(sp);
 	}

arch/powerpc/kernel/vdso.c

@@ -22,7 +22,7 @@
 #include <linux/elf.h>
 #include <linux/security.h>
 #include <linux/bootmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -734,7 +734,7 @@ static int __init vdso_init(void)
 	vdso_data->platform = machine_is(iseries) ? 0x200 : 0x100;
 	if (firmware_has_feature(FW_FEATURE_LPAR))
 		vdso_data->platform |= 1;
-	vdso_data->physicalMemorySize = lmb_phys_mem_size();
+	vdso_data->physicalMemorySize = memblock_phys_mem_size();
 	vdso_data->dcache_size = ppc64_caches.dsize;
 	vdso_data->dcache_line_size = ppc64_caches.dline_size;
 	vdso_data->icache_size = ppc64_caches.isize;

arch/powerpc/mm/40x_mmu.c

@@ -135,7 +135,7 @@ unsigned long __init mmu_mapin_ram(unsigned long top)
 	/* If the size of RAM is not an exact power of two, we may not
 	 * have covered RAM in its entirety with 16 and 4 MiB
 	 * pages. Consequently, restrict the top end of RAM currently
-	 * allocable so that calls to the LMB to allocate PTEs for "tail"
+	 * allocable so that calls to the MEMBLOCK to allocate PTEs for "tail"
 	 * coverage with normal-sized pages (or other reasons) do not
 	 * attempt to allocate outside the allowed range.
 	 */

arch/powerpc/mm/hash_low_64.S

@@ -68,9 +68,6 @@ _GLOBAL(__hash_page_4K)
 	std	r8,STK_PARM(r8)(r1)
 	std	r9,STK_PARM(r9)(r1)
 	
-	/* Add _PAGE_PRESENT to access */
-	ori	r4,r4,_PAGE_PRESENT
-
 	/* Save non-volatile registers.
 	 * r31 will hold "old PTE"
 	 * r30 is "new PTE"
@@ -347,9 +344,6 @@ _GLOBAL(__hash_page_4K)
 	std	r8,STK_PARM(r8)(r1)
 	std	r9,STK_PARM(r9)(r1)
 
-	/* Add _PAGE_PRESENT to access */
-	ori	r4,r4,_PAGE_PRESENT
-
 	/* Save non-volatile registers.
 	 * r31 will hold "old PTE"
 	 * r30 is "new PTE"
@@ -687,9 +681,6 @@ _GLOBAL(__hash_page_64K)
 	std	r8,STK_PARM(r8)(r1)
 	std	r9,STK_PARM(r9)(r1)
 
-	/* Add _PAGE_PRESENT to access */
-	ori	r4,r4,_PAGE_PRESENT
-
 	/* Save non-volatile registers.
 	 * r31 will hold "old PTE"
 	 * r30 is "new PTE"

arch/powerpc/mm/hash_utils_64.c

@@ -31,7 +31,7 @@
 #include <linux/cache.h>
 #include <linux/init.h>
 #include <linux/signal.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/processor.h>
 #include <asm/pgtable.h>
@@ -384,8 +384,8 @@ static int __init htab_dt_scan_hugepage_blocks(unsigned long node,
 	printk(KERN_INFO "Huge page(16GB) memory: "
 			"addr = 0x%lX size = 0x%lX pages = %d\n",
 			phys_addr, block_size, expected_pages);
-	if (phys_addr + (16 * GB) <= lmb_end_of_DRAM()) {
-		lmb_reserve(phys_addr, block_size * expected_pages);
+	if (phys_addr + (16 * GB) <= memblock_end_of_DRAM()) {
+		memblock_reserve(phys_addr, block_size * expected_pages);
 		add_gpage(phys_addr, block_size, expected_pages);
 	}
 	return 0;
@@ -458,7 +458,7 @@ static void __init htab_init_page_sizes(void)
 	 * and we have at least 1G of RAM at boot
 	 */
 	if (mmu_psize_defs[MMU_PAGE_16M].shift &&
-	    lmb_phys_mem_size() >= 0x40000000)
+	    memblock_phys_mem_size() >= 0x40000000)
 		mmu_vmemmap_psize = MMU_PAGE_16M;
 	else if (mmu_psize_defs[MMU_PAGE_64K].shift)
 		mmu_vmemmap_psize = MMU_PAGE_64K;
@@ -520,7 +520,7 @@ static unsigned long __init htab_get_table_size(void)
 		return 1UL << ppc64_pft_size;
 
 	/* round mem_size up to next power of 2 */
-	mem_size = lmb_phys_mem_size();
+	mem_size = memblock_phys_mem_size();
 	rnd_mem_size = 1UL << __ilog2(mem_size);
 	if (rnd_mem_size < mem_size)
 		rnd_mem_size <<= 1;
@@ -627,7 +627,7 @@ static void __init htab_initialize(void)
 		else
 			limit = 0;
 
-		table = lmb_alloc_base(htab_size_bytes, htab_size_bytes, limit);
+		table = memblock_alloc_base(htab_size_bytes, htab_size_bytes, limit);
 
 		DBG("Hash table allocated at %lx, size: %lx\n", table,
 		    htab_size_bytes);
@@ -647,9 +647,9 @@ static void __init htab_initialize(void)
 	prot = pgprot_val(PAGE_KERNEL);
 
 #ifdef CONFIG_DEBUG_PAGEALLOC
-	linear_map_hash_count = lmb_end_of_DRAM() >> PAGE_SHIFT;
-	linear_map_hash_slots = __va(lmb_alloc_base(linear_map_hash_count,
-						    1, lmb.rmo_size));
+	linear_map_hash_count = memblock_end_of_DRAM() >> PAGE_SHIFT;
+	linear_map_hash_slots = __va(memblock_alloc_base(linear_map_hash_count,
+						    1, memblock.rmo_size));
 	memset(linear_map_hash_slots, 0, linear_map_hash_count);
 #endif /* CONFIG_DEBUG_PAGEALLOC */
 
@@ -659,16 +659,16 @@ static void __init htab_initialize(void)
 	 */
 
 	/* create bolted the linear mapping in the hash table */
-	for (i=0; i < lmb.memory.cnt; i++) {
-		base = (unsigned long)__va(lmb.memory.region[i].base);
-		size = lmb.memory.region[i].size;
+	for (i=0; i < memblock.memory.cnt; i++) {
+		base = (unsigned long)__va(memblock.memory.region[i].base);
+		size = memblock.memory.region[i].size;
 
 		DBG("creating mapping for region: %lx..%lx (prot: %lx)\n",
 		    base, size, prot);
 
 #ifdef CONFIG_U3_DART
 		/* Do not map the DART space. Fortunately, it will be aligned
-		 * in such a way that it will not cross two lmb regions and
+		 * in such a way that it will not cross two memblock regions and
 		 * will fit within a single 16Mb page.
 		 * The DART space is assumed to be a full 16Mb region even if
 		 * we only use 2Mb of that space. We will use more of it later
@@ -871,6 +871,18 @@ static inline int subpage_protection(struct mm_struct *mm, unsigned long ea)
 }
 #endif
 
+void hash_failure_debug(unsigned long ea, unsigned long access,
+			unsigned long vsid, unsigned long trap,
+			int ssize, int psize, unsigned long pte)
+{
+	if (!printk_ratelimit())
+		return;
+	pr_info("mm: Hashing failure ! EA=0x%lx access=0x%lx current=%s\n",
+		ea, access, current->comm);
+	pr_info("    trap=0x%lx vsid=0x%lx ssize=%d psize=%d pte=0x%lx\n",
+		trap, vsid, ssize, psize, pte);
+}
+
 /* Result code is:
  *  0 - handled
  *  1 - normal page fault
@@ -955,6 +967,17 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 		return 1;
 	}
 
+	/* Add _PAGE_PRESENT to the required access perm */
+	access |= _PAGE_PRESENT;
+
+	/* Pre-check access permissions (will be re-checked atomically
+	 * in __hash_page_XX but this pre-check is a fast path
+	 */
+	if (access & ~pte_val(*ptep)) {
+		DBG_LOW(" no access !\n");
+		return 1;
+	}
+
 #ifdef CONFIG_HUGETLB_PAGE
 	if (hugeshift)
 		return __hash_page_huge(ea, access, vsid, ptep, trap, local,
@@ -967,14 +990,6 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 	DBG_LOW(" i-pte: %016lx %016lx\n", pte_val(*ptep),
 		pte_val(*(ptep + PTRS_PER_PTE)));
 #endif
-	/* Pre-check access permissions (will be re-checked atomically
-	 * in __hash_page_XX but this pre-check is a fast path
-	 */
-	if (access & ~pte_val(*ptep)) {
-		DBG_LOW(" no access !\n");
-		return 1;
-	}
-
 	/* Do actual hashing */
 #ifdef CONFIG_PPC_64K_PAGES
 	/* If _PAGE_4K_PFN is set, make sure this is a 4k segment */
@@ -1033,6 +1048,12 @@ int hash_page(unsigned long ea, unsigned long access, unsigned long trap)
 					    local, ssize, spp);
 	}
 
+	/* Dump some info in case of hash insertion failure, they should
+	 * never happen so it is really useful to know if/when they do
+	 */
+	if (rc == -1)
+		hash_failure_debug(ea, access, vsid, trap, ssize, psize,
+				   pte_val(*ptep));
 #ifndef CONFIG_PPC_64K_PAGES
 	DBG_LOW(" o-pte: %016lx\n", pte_val(*ptep));
 #else
@@ -1051,8 +1072,7 @@ void hash_preload(struct mm_struct *mm, unsigned long ea,
 	void *pgdir;
 	pte_t *ptep;
 	unsigned long flags;
-	int local = 0;
-	int ssize;
+	int rc, ssize, local = 0;
 
 	BUG_ON(REGION_ID(ea) != USER_REGION_ID);
 
@@ -1098,11 +1118,18 @@ void hash_preload(struct mm_struct *mm, unsigned long ea,
 	/* Hash it in */
 #ifdef CONFIG_PPC_HAS_HASH_64K
 	if (mm->context.user_psize == MMU_PAGE_64K)
-		__hash_page_64K(ea, access, vsid, ptep, trap, local, ssize);
+		rc = __hash_page_64K(ea, access, vsid, ptep, trap, local, ssize);
 	else
 #endif /* CONFIG_PPC_HAS_HASH_64K */
-		__hash_page_4K(ea, access, vsid, ptep, trap, local, ssize,
-			       subpage_protection(pgdir, ea));
+		rc = __hash_page_4K(ea, access, vsid, ptep, trap, local, ssize,
+				    subpage_protection(pgdir, ea));
+
+	/* Dump some info in case of hash insertion failure, they should
+	 * never happen so it is really useful to know if/when they do
+	 */
+	if (rc == -1)
+		hash_failure_debug(ea, access, vsid, trap, ssize,
+				   mm->context.user_psize, pte_val(*ptep));
 
 	local_irq_restore(flags);
 }

arch/powerpc/mm/hugetlbpage-hash64.c

@@ -21,21 +21,13 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 	unsigned long old_pte, new_pte;
 	unsigned long va, rflags, pa, sz;
 	long slot;
-	int err = 1;
 
 	BUG_ON(shift != mmu_psize_defs[mmu_psize].shift);
 
 	/* Search the Linux page table for a match with va */
 	va = hpt_va(ea, vsid, ssize);
 
-	/*
-	 * Check the user's access rights to the page.  If access should be
-	 * prevented then send the problem up to do_page_fault.
-	 */
-	if (unlikely(access & ~pte_val(*ptep)))
-		goto out;
-	/*
-	 * At this point, we have a pte (old_pte) which can be used to build
+	/* At this point, we have a pte (old_pte) which can be used to build
 	 * or update an HPTE. There are 2 cases:
 	 *
 	 * 1. There is a valid (present) pte with no associated HPTE (this is
@@ -49,9 +41,17 @@ int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
 
 	do {
 		old_pte = pte_val(*ptep);
-		if (old_pte & _PAGE_BUSY)
-			goto out;
+		/* If PTE busy, retry the access */
+		if (unlikely(old_pte & _PAGE_BUSY))
+			return 0;
+		/* If PTE permissions don't match, take page fault */
+		if (unlikely(access & ~old_pte))
+			return 1;
+		/* Try to lock the PTE, add ACCESSED and DIRTY if it was
+		 * a write access */
 		new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED;
+		if (access & _PAGE_RW)
+			new_pte |= _PAGE_DIRTY;
 	} while(old_pte != __cmpxchg_u64((unsigned long *)ptep,
 					 old_pte, new_pte));
 
@@ -121,8 +121,16 @@ repeat:
                         }
 		}
 
-		if (unlikely(slot == -2))
-			panic("hash_huge_page: pte_insert failed\n");
+		/*
+		 * Hypervisor failure. Restore old pte and return -1
+		 * similar to __hash_page_*
+		 */
+		if (unlikely(slot == -2)) {
+			*ptep = __pte(old_pte);
+			hash_failure_debug(ea, access, vsid, trap, ssize,
+					   mmu_psize, old_pte);
+			return -1;
+		}
 
 		new_pte |= (slot << 12) & (_PAGE_F_SECOND | _PAGE_F_GIX);
 	}
@@ -131,9 +139,5 @@ repeat:
 	 * No need to use ldarx/stdcx here
 	 */
 	*ptep = __pte(new_pte & ~_PAGE_BUSY);
-
-	err = 0;
-
- out:
-	return err;
+	return 0;
 }

arch/powerpc/mm/init_32.c

@@ -30,7 +30,7 @@
 #include <linux/highmem.h>
 #include <linux/initrd.h>
 #include <linux/pagemap.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/gfp.h>
 
 #include <asm/pgalloc.h>
@@ -136,17 +136,17 @@ void __init MMU_init(void)
 	/* parse args from command line */
 	MMU_setup();
 
-	if (lmb.memory.cnt > 1) {
+	if (memblock.memory.cnt > 1) {
 #ifndef CONFIG_WII
-		lmb.memory.cnt = 1;
-		lmb_analyze();
+		memblock.memory.cnt = 1;
+		memblock_analyze();
 		printk(KERN_WARNING "Only using first contiguous memory region");
 #else
 		wii_memory_fixups();
 #endif
 	}
 
-	total_lowmem = total_memory = lmb_end_of_DRAM() - memstart_addr;
+	total_lowmem = total_memory = memblock_end_of_DRAM() - memstart_addr;
 	lowmem_end_addr = memstart_addr + total_lowmem;
 
 #ifdef CONFIG_FSL_BOOKE
@@ -161,8 +161,8 @@ void __init MMU_init(void)
 		lowmem_end_addr = memstart_addr + total_lowmem;
 #ifndef CONFIG_HIGHMEM
 		total_memory = total_lowmem;
-		lmb_enforce_memory_limit(lowmem_end_addr);
-		lmb_analyze();
+		memblock_enforce_memory_limit(lowmem_end_addr);
+		memblock_analyze();
 #endif /* CONFIG_HIGHMEM */
 	}
 
@@ -200,7 +200,7 @@ void __init *early_get_page(void)
 	if (init_bootmem_done) {
 		p = alloc_bootmem_pages(PAGE_SIZE);
 	} else {
-		p = __va(lmb_alloc_base(PAGE_SIZE, PAGE_SIZE,
+		p = __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE,
 					__initial_memory_limit_addr));
 	}
 	return p;

arch/powerpc/mm/init_64.c

@@ -40,7 +40,7 @@
 #include <linux/nodemask.h>
 #include <linux/module.h>
 #include <linux/poison.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/hugetlb.h>
 #include <linux/slab.h>
 

arch/powerpc/mm/mem.c

@@ -32,7 +32,7 @@
 #include <linux/initrd.h>
 #include <linux/pagemap.h>
 #include <linux/suspend.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/hugetlb.h>
 
 #include <asm/pgalloc.h>
@@ -83,13 +83,13 @@ int page_is_ram(unsigned long pfn)
 #else
 	unsigned long paddr = (pfn << PAGE_SHIFT);
 	int i;
-	for (i=0; i < lmb.memory.cnt; i++) {
+	for (i=0; i < memblock.memory.cnt; i++) {
 		unsigned long base;
 
-		base = lmb.memory.region[i].base;
+		base = memblock.memory.region[i].base;
 
 		if ((paddr >= base) &&
-			(paddr < (base + lmb.memory.region[i].size))) {
+			(paddr < (base + memblock.memory.region[i].size))) {
 			return 1;
 		}
 	}
@@ -142,14 +142,14 @@ int arch_add_memory(int nid, u64 start, u64 size)
 /*
  * walk_memory_resource() needs to make sure there is no holes in a given
  * memory range.  PPC64 does not maintain the memory layout in /proc/iomem.
- * Instead it maintains it in lmb.memory structures.  Walk through the
+ * Instead it maintains it in memblock.memory structures.  Walk through the
  * memory regions, find holes and callback for contiguous regions.
  */
 int
 walk_system_ram_range(unsigned long start_pfn, unsigned long nr_pages,
 		void *arg, int (*func)(unsigned long, unsigned long, void *))
 {
-	struct lmb_property res;
+	struct memblock_property res;
 	unsigned long pfn, len;
 	u64 end;
 	int ret = -1;
@@ -158,7 +158,7 @@ walk_system_ram_range(unsigned long start_pfn, unsigned long nr_pages,
 	res.size = (u64) nr_pages << PAGE_SHIFT;
 
 	end = res.base + res.size - 1;
-	while ((res.base < end) && (lmb_find(&res) >= 0)) {
+	while ((res.base < end) && (memblock_find(&res) >= 0)) {
 		pfn = (unsigned long)(res.base >> PAGE_SHIFT);
 		len = (unsigned long)(res.size >> PAGE_SHIFT);
 		ret = (*func)(pfn, len, arg);
@@ -184,8 +184,8 @@ void __init do_init_bootmem(void)
 	unsigned long total_pages;
 	int boot_mapsize;
 
-	max_low_pfn = max_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
-	total_pages = (lmb_end_of_DRAM() - memstart_addr) >> PAGE_SHIFT;
+	max_low_pfn = max_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
+	total_pages = (memblock_end_of_DRAM() - memstart_addr) >> PAGE_SHIFT;
 #ifdef CONFIG_HIGHMEM
 	total_pages = total_lowmem >> PAGE_SHIFT;
 	max_low_pfn = lowmem_end_addr >> PAGE_SHIFT;
@@ -198,16 +198,16 @@ void __init do_init_bootmem(void)
 	 */
 	bootmap_pages = bootmem_bootmap_pages(total_pages);
 
-	start = lmb_alloc(bootmap_pages << PAGE_SHIFT, PAGE_SIZE);
+	start = memblock_alloc(bootmap_pages << PAGE_SHIFT, PAGE_SIZE);
 
 	min_low_pfn = MEMORY_START >> PAGE_SHIFT;
 	boot_mapsize = init_bootmem_node(NODE_DATA(0), start >> PAGE_SHIFT, min_low_pfn, max_low_pfn);
 
 	/* Add active regions with valid PFNs */
-	for (i = 0; i < lmb.memory.cnt; i++) {
+	for (i = 0; i < memblock.memory.cnt; i++) {
 		unsigned long start_pfn, end_pfn;
-		start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT;
-		end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i);
+		start_pfn = memblock.memory.region[i].base >> PAGE_SHIFT;
+		end_pfn = start_pfn + memblock_size_pages(&memblock.memory, i);
 		add_active_range(0, start_pfn, end_pfn);
 	}
 
@@ -218,17 +218,17 @@ void __init do_init_bootmem(void)
 	free_bootmem_with_active_regions(0, lowmem_end_addr >> PAGE_SHIFT);
 
 	/* reserve the sections we're already using */
-	for (i = 0; i < lmb.reserved.cnt; i++) {
-		unsigned long addr = lmb.reserved.region[i].base +
-				     lmb_size_bytes(&lmb.reserved, i) - 1;
+	for (i = 0; i < memblock.reserved.cnt; i++) {
+		unsigned long addr = memblock.reserved.region[i].base +
+				     memblock_size_bytes(&memblock.reserved, i) - 1;
 		if (addr < lowmem_end_addr)
-			reserve_bootmem(lmb.reserved.region[i].base,
-					lmb_size_bytes(&lmb.reserved, i),
+			reserve_bootmem(memblock.reserved.region[i].base,
+					memblock_size_bytes(&memblock.reserved, i),
 					BOOTMEM_DEFAULT);
-		else if (lmb.reserved.region[i].base < lowmem_end_addr) {
+		else if (memblock.reserved.region[i].base < lowmem_end_addr) {
 			unsigned long adjusted_size = lowmem_end_addr -
-				      lmb.reserved.region[i].base;
-			reserve_bootmem(lmb.reserved.region[i].base,
+				      memblock.reserved.region[i].base;
+			reserve_bootmem(memblock.reserved.region[i].base,
 					adjusted_size, BOOTMEM_DEFAULT);
 		}
 	}
@@ -236,9 +236,9 @@ void __init do_init_bootmem(void)
 	free_bootmem_with_active_regions(0, max_pfn);
 
 	/* reserve the sections we're already using */
-	for (i = 0; i < lmb.reserved.cnt; i++)
-		reserve_bootmem(lmb.reserved.region[i].base,
-				lmb_size_bytes(&lmb.reserved, i),
+	for (i = 0; i < memblock.reserved.cnt; i++)
+		reserve_bootmem(memblock.reserved.region[i].base,
+				memblock_size_bytes(&memblock.reserved, i),
 				BOOTMEM_DEFAULT);
 
 #endif
@@ -251,20 +251,20 @@ void __init do_init_bootmem(void)
 /* mark pages that don't exist as nosave */
 static int __init mark_nonram_nosave(void)
 {
-	unsigned long lmb_next_region_start_pfn,
-		      lmb_region_max_pfn;
+	unsigned long memblock_next_region_start_pfn,
+		      memblock_region_max_pfn;
 	int i;
 
-	for (i = 0; i < lmb.memory.cnt - 1; i++) {
-		lmb_region_max_pfn =
-			(lmb.memory.region[i].base >> PAGE_SHIFT) +
-			(lmb.memory.region[i].size >> PAGE_SHIFT);
-		lmb_next_region_start_pfn =
-			lmb.memory.region[i+1].base >> PAGE_SHIFT;
+	for (i = 0; i < memblock.memory.cnt - 1; i++) {
+		memblock_region_max_pfn =
+			(memblock.memory.region[i].base >> PAGE_SHIFT) +
+			(memblock.memory.region[i].size >> PAGE_SHIFT);
+		memblock_next_region_start_pfn =
+			memblock.memory.region[i+1].base >> PAGE_SHIFT;
 
-		if (lmb_region_max_pfn < lmb_next_region_start_pfn)
-			register_nosave_region(lmb_region_max_pfn,
-					       lmb_next_region_start_pfn);
+		if (memblock_region_max_pfn < memblock_next_region_start_pfn)
+			register_nosave_region(memblock_region_max_pfn,
+					       memblock_next_region_start_pfn);
 	}
 
 	return 0;
@@ -275,8 +275,8 @@ static int __init mark_nonram_nosave(void)
  */
 void __init paging_init(void)
 {
-	unsigned long total_ram = lmb_phys_mem_size();
-	phys_addr_t top_of_ram = lmb_end_of_DRAM();
+	unsigned long total_ram = memblock_phys_mem_size();
+	phys_addr_t top_of_ram = memblock_end_of_DRAM();
 	unsigned long max_zone_pfns[MAX_NR_ZONES];
 
 #ifdef CONFIG_PPC32
@@ -327,7 +327,7 @@ void __init mem_init(void)
 		swiotlb_init(1);
 #endif
 
-	num_physpages = lmb.memory.size >> PAGE_SHIFT;
+	num_physpages = memblock.memory.size >> PAGE_SHIFT;
 	high_memory = (void *) __va(max_low_pfn * PAGE_SIZE);
 
 #ifdef CONFIG_NEED_MULTIPLE_NODES
@@ -364,7 +364,7 @@ void __init mem_init(void)
 		highmem_mapnr = lowmem_end_addr >> PAGE_SHIFT;
 		for (pfn = highmem_mapnr; pfn < max_mapnr; ++pfn) {
 			struct page *page = pfn_to_page(pfn);
-			if (lmb_is_reserved(pfn << PAGE_SHIFT))
+			if (memblock_is_reserved(pfn << PAGE_SHIFT))
 				continue;
 			ClearPageReserved(page);
 			init_page_count(page);

arch/powerpc/mm/numa.c

@@ -17,7 +17,7 @@
 #include <linux/nodemask.h>
 #include <linux/cpu.h>
 #include <linux/notifier.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/of.h>
 #include <linux/pfn.h>
 #include <asm/sparsemem.h>
@@ -351,7 +351,7 @@ struct of_drconf_cell {
 #define DRCONF_MEM_RESERVED	0x00000080
 
 /*
- * Read the next lmb list entry from the ibm,dynamic-memory property
+ * Read the next memblock list entry from the ibm,dynamic-memory property
  * and return the information in the provided of_drconf_cell structure.
  */
 static void read_drconf_cell(struct of_drconf_cell *drmem, const u32 **cellp)
@@ -372,8 +372,8 @@ static void read_drconf_cell(struct of_drconf_cell *drmem, const u32 **cellp)
 /*
  * Retreive and validate the ibm,dynamic-memory property of the device tree.
  *
- * The layout of the ibm,dynamic-memory property is a number N of lmb
- * list entries followed by N lmb list entries.  Each lmb list entry
+ * The layout of the ibm,dynamic-memory property is a number N of memblock
+ * list entries followed by N memblock list entries.  Each memblock list entry
  * contains information as layed out in the of_drconf_cell struct above.
  */
 static int of_get_drconf_memory(struct device_node *memory, const u32 **dm)
@@ -540,19 +540,19 @@ static unsigned long __init numa_enforce_memory_limit(unsigned long start,
 						      unsigned long size)
 {
 	/*
-	 * We use lmb_end_of_DRAM() in here instead of memory_limit because
+	 * We use memblock_end_of_DRAM() in here instead of memory_limit because
 	 * we've already adjusted it for the limit and it takes care of
 	 * having memory holes below the limit.  Also, in the case of
 	 * iommu_is_off, memory_limit is not set but is implicitly enforced.
 	 */
 
-	if (start + size <= lmb_end_of_DRAM())
+	if (start + size <= memblock_end_of_DRAM())
 		return size;
 
-	if (start >= lmb_end_of_DRAM())
+	if (start >= memblock_end_of_DRAM())
 		return 0;
 
-	return lmb_end_of_DRAM() - start;
+	return memblock_end_of_DRAM() - start;
 }
 
 /*
@@ -731,7 +731,7 @@ new_range:
 	}
 
 	/*
-	 * Now do the same thing for each LMB listed in the ibm,dynamic-memory
+	 * Now do the same thing for each MEMBLOCK listed in the ibm,dynamic-memory
 	 * property in the ibm,dynamic-reconfiguration-memory node.
 	 */
 	memory = of_find_node_by_path("/ibm,dynamic-reconfiguration-memory");
@@ -743,8 +743,8 @@ new_range:
 
 static void __init setup_nonnuma(void)
 {
-	unsigned long top_of_ram = lmb_end_of_DRAM();
-	unsigned long total_ram = lmb_phys_mem_size();
+	unsigned long top_of_ram = memblock_end_of_DRAM();
+	unsigned long total_ram = memblock_phys_mem_size();
 	unsigned long start_pfn, end_pfn;
 	unsigned int i, nid = 0;
 
@@ -753,9 +753,9 @@ static void __init setup_nonnuma(void)
 	printk(KERN_DEBUG "Memory hole size: %ldMB\n",
 	       (top_of_ram - total_ram) >> 20);
 
-	for (i = 0; i < lmb.memory.cnt; ++i) {
-		start_pfn = lmb.memory.region[i].base >> PAGE_SHIFT;
-		end_pfn = start_pfn + lmb_size_pages(&lmb.memory, i);
+	for (i = 0; i < memblock.memory.cnt; ++i) {
+		start_pfn = memblock.memory.region[i].base >> PAGE_SHIFT;
+		end_pfn = start_pfn + memblock_size_pages(&memblock.memory, i);
 
 		fake_numa_create_new_node(end_pfn, &nid);
 		add_active_range(nid, start_pfn, end_pfn);
@@ -813,7 +813,7 @@ static void __init dump_numa_memory_topology(void)
 
 		count = 0;
 
-		for (i = 0; i < lmb_end_of_DRAM();
+		for (i = 0; i < memblock_end_of_DRAM();
 		     i += (1 << SECTION_SIZE_BITS)) {
 			if (early_pfn_to_nid(i >> PAGE_SHIFT) == node) {
 				if (count == 0)
@@ -833,7 +833,7 @@ static void __init dump_numa_memory_topology(void)
 }
 
 /*
- * Allocate some memory, satisfying the lmb or bootmem allocator where
+ * Allocate some memory, satisfying the memblock or bootmem allocator where
  * required. nid is the preferred node and end is the physical address of
  * the highest address in the node.
  *
@@ -847,11 +847,11 @@ static void __init *careful_zallocation(int nid, unsigned long size,
 	int new_nid;
 	unsigned long ret_paddr;
 
-	ret_paddr = __lmb_alloc_base(size, align, end_pfn << PAGE_SHIFT);
+	ret_paddr = __memblock_alloc_base(size, align, end_pfn << PAGE_SHIFT);
 
 	/* retry over all memory */
 	if (!ret_paddr)
-		ret_paddr = __lmb_alloc_base(size, align, lmb_end_of_DRAM());
+		ret_paddr = __memblock_alloc_base(size, align, memblock_end_of_DRAM());
 
 	if (!ret_paddr)
 		panic("numa.c: cannot allocate %lu bytes for node %d",
@@ -861,14 +861,14 @@ static void __init *careful_zallocation(int nid, unsigned long size,
 
 	/*
 	 * We initialize the nodes in numeric order: 0, 1, 2...
-	 * and hand over control from the LMB allocator to the
+	 * and hand over control from the MEMBLOCK allocator to the
 	 * bootmem allocator.  If this function is called for
 	 * node 5, then we know that all nodes <5 are using the
-	 * bootmem allocator instead of the LMB allocator.
+	 * bootmem allocator instead of the MEMBLOCK allocator.
 	 *
 	 * So, check the nid from which this allocation came
 	 * and double check to see if we need to use bootmem
-	 * instead of the LMB.  We don't free the LMB memory
+	 * instead of the MEMBLOCK.  We don't free the MEMBLOCK memory
 	 * since it would be useless.
 	 */
 	new_nid = early_pfn_to_nid(ret_paddr >> PAGE_SHIFT);
@@ -893,9 +893,9 @@ static void mark_reserved_regions_for_nid(int nid)
 	struct pglist_data *node = NODE_DATA(nid);
 	int i;
 
-	for (i = 0; i < lmb.reserved.cnt; i++) {
-		unsigned long physbase = lmb.reserved.region[i].base;
-		unsigned long size = lmb.reserved.region[i].size;
+	for (i = 0; i < memblock.reserved.cnt; i++) {
+		unsigned long physbase = memblock.reserved.region[i].base;
+		unsigned long size = memblock.reserved.region[i].size;
 		unsigned long start_pfn = physbase >> PAGE_SHIFT;
 		unsigned long end_pfn = PFN_UP(physbase + size);
 		struct node_active_region node_ar;
@@ -903,7 +903,7 @@ static void mark_reserved_regions_for_nid(int nid)
 					     node->node_spanned_pages;
 
 		/*
-		 * Check to make sure that this lmb.reserved area is
+		 * Check to make sure that this memblock.reserved area is
 		 * within the bounds of the node that we care about.
 		 * Checking the nid of the start and end points is not
 		 * sufficient because the reserved area could span the
@@ -961,7 +961,7 @@ void __init do_init_bootmem(void)
 	int nid;
 
 	min_low_pfn = 0;
-	max_low_pfn = lmb_end_of_DRAM() >> PAGE_SHIFT;
+	max_low_pfn = memblock_end_of_DRAM() >> PAGE_SHIFT;
 	max_pfn = max_low_pfn;
 
 	if (parse_numa_properties())
@@ -1038,7 +1038,7 @@ void __init paging_init(void)
 {
 	unsigned long max_zone_pfns[MAX_NR_ZONES];
 	memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
-	max_zone_pfns[ZONE_DMA] = lmb_end_of_DRAM() >> PAGE_SHIFT;
+	max_zone_pfns[ZONE_DMA] = memblock_end_of_DRAM() >> PAGE_SHIFT;
 	free_area_init_nodes(max_zone_pfns);
 }
 
@@ -1113,7 +1113,7 @@ static int hot_add_drconf_scn_to_nid(struct device_node *memory,
 /*
  * Find the node associated with a hot added memory section for memory
  * represented in the device tree as a node (i.e. memory@XXXX) for
- * each lmb.
+ * each memblock.
  */
 int hot_add_node_scn_to_nid(unsigned long scn_addr)
 {
@@ -1154,8 +1154,8 @@ int hot_add_node_scn_to_nid(unsigned long scn_addr)
 
 /*
  * Find the node associated with a hot added memory section.  Section
- * corresponds to a SPARSEMEM section, not an LMB.  It is assumed that
- * sections are fully contained within a single LMB.
+ * corresponds to a SPARSEMEM section, not an MEMBLOCK.  It is assumed that
+ * sections are fully contained within a single MEMBLOCK.
  */
 int hot_add_scn_to_nid(unsigned long scn_addr)
 {

arch/powerpc/mm/pgtable_32.c

@@ -26,7 +26,7 @@
 #include <linux/vmalloc.h>
 #include <linux/init.h>
 #include <linux/highmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/slab.h>
 
 #include <asm/pgtable.h>
@@ -198,7 +198,7 @@ __ioremap_caller(phys_addr_t addr, unsigned long size, unsigned long flags,
 	 * mem_init() sets high_memory so only do the check after that.
 	 */
 	if (mem_init_done && (p < virt_to_phys(high_memory)) &&
-	    !(__allow_ioremap_reserved && lmb_is_region_reserved(p, size))) {
+	    !(__allow_ioremap_reserved && memblock_is_region_reserved(p, size))) {
 		printk("__ioremap(): phys addr 0x%llx is RAM lr %p\n",
 		       (unsigned long long)p, __builtin_return_address(0));
 		return NULL;
@@ -331,7 +331,7 @@ void __init mapin_ram(void)
 		s = mmu_mapin_ram(top);
 		__mapin_ram_chunk(s, top);
 
-		top = lmb_end_of_DRAM();
+		top = memblock_end_of_DRAM();
 		s = wii_mmu_mapin_mem2(top);
 		__mapin_ram_chunk(s, top);
 	}

arch/powerpc/mm/pgtable_64.c

@@ -34,7 +34,7 @@
 #include <linux/vmalloc.h>
 #include <linux/init.h>
 #include <linux/bootmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 #include <linux/slab.h>
 
 #include <asm/pgalloc.h>
@@ -67,7 +67,7 @@ static void *early_alloc_pgtable(unsigned long size)
 	if (init_bootmem_done)
 		pt = __alloc_bootmem(size, size, __pa(MAX_DMA_ADDRESS));
 	else
-		pt = __va(lmb_alloc_base(size, size,
+		pt = __va(memblock_alloc_base(size, size,
 					 __pa(MAX_DMA_ADDRESS)));
 	memset(pt, 0, size);
 

arch/powerpc/mm/ppc_mmu_32.c

@@ -26,7 +26,7 @@
 #include <linux/mm.h>
 #include <linux/init.h>
 #include <linux/highmem.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/prom.h>
 #include <asm/mmu.h>
@@ -223,7 +223,7 @@ void __init MMU_init_hw(void)
 	 * Find some memory for the hash table.
 	 */
 	if ( ppc_md.progress ) ppc_md.progress("hash:find piece", 0x322);
-	Hash = __va(lmb_alloc_base(Hash_size, Hash_size,
+	Hash = __va(memblock_alloc_base(Hash_size, Hash_size,
 				   __initial_memory_limit_addr));
 	cacheable_memzero(Hash, Hash_size);
 	_SDR1 = __pa(Hash) | SDR1_LOW_BITS;

arch/powerpc/mm/stab.c

@@ -12,7 +12,7 @@
  *      2 of the License, or (at your option) any later version.
  */
 
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/pgtable.h>
 #include <asm/mmu.h>
@@ -252,7 +252,7 @@ void __init stabs_alloc(void)
 		if (cpu == 0)
 			continue; /* stab for CPU 0 is statically allocated */
 
-		newstab = lmb_alloc_base(HW_PAGE_SIZE, HW_PAGE_SIZE,
+		newstab = memblock_alloc_base(HW_PAGE_SIZE, HW_PAGE_SIZE,
 					 1<<SID_SHIFT);
 		newstab = (unsigned long)__va(newstab);
 

arch/powerpc/mm/tlb_nohash.c

@@ -34,7 +34,7 @@
 #include <linux/pagemap.h>
 #include <linux/preempt.h>
 #include <linux/spinlock.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/tlbflush.h>
 #include <asm/tlb.h>
@@ -426,7 +426,7 @@ static void __early_init_mmu(int boot_cpu)
 	/* Set the global containing the top of the linear mapping
 	 * for use by the TLB miss code
 	 */
-	linear_map_top = lmb_end_of_DRAM();
+	linear_map_top = memblock_end_of_DRAM();
 
 	/* A sync won't hurt us after mucking around with
 	 * the MMU configuration

arch/powerpc/platforms/85xx/corenet_ds.c

@@ -16,7 +16,7 @@
 #include <linux/kdev_t.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -100,7 +100,7 @@ void __init corenet_ds_setup_arch(void)
 #endif
 
 #ifdef CONFIG_SWIOTLB
-	if (lmb_end_of_DRAM() > max) {
+	if (memblock_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;

arch/powerpc/platforms/85xx/mpc8536_ds.c

@@ -17,7 +17,7 @@
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -94,7 +94,7 @@ static void __init mpc8536_ds_setup_arch(void)
 #endif
 
 #ifdef CONFIG_SWIOTLB
-	if (lmb_end_of_DRAM() > max) {
+	if (memblock_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;

arch/powerpc/platforms/85xx/mpc85xx_ds.c

@@ -20,7 +20,7 @@
 #include <linux/seq_file.h>
 #include <linux/interrupt.h>
 #include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -190,7 +190,7 @@ static void __init mpc85xx_ds_setup_arch(void)
 #endif
 
 #ifdef CONFIG_SWIOTLB
-	if (lmb_end_of_DRAM() > max) {
+	if (memblock_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;

arch/powerpc/platforms/85xx/mpc85xx_mds.c

@@ -33,7 +33,7 @@
 #include <linux/of_platform.h>
 #include <linux/of_device.h>
 #include <linux/phy.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/system.h>
 #include <asm/atomic.h>
@@ -325,7 +325,7 @@ static void __init mpc85xx_mds_setup_arch(void)
 #endif	/* CONFIG_QUICC_ENGINE */
 
 #ifdef CONFIG_SWIOTLB
-	if (lmb_end_of_DRAM() > max) {
+	if (memblock_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;

arch/powerpc/platforms/86xx/mpc86xx_hpcn.c

@@ -19,7 +19,7 @@
 #include <linux/delay.h>
 #include <linux/seq_file.h>
 #include <linux/of_platform.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/system.h>
 #include <asm/time.h>
@@ -103,7 +103,7 @@ mpc86xx_hpcn_setup_arch(void)
 #endif
 
 #ifdef CONFIG_SWIOTLB
-	if (lmb_end_of_DRAM() > max) {
+	if (memblock_end_of_DRAM() > max) {
 		ppc_swiotlb_enable = 1;
 		set_pci_dma_ops(&swiotlb_dma_ops);
 		ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;

arch/powerpc/platforms/cell/iommu.c

@@ -29,7 +29,7 @@
 #include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/slab.h>
-#include <linux/lmb.h>
+#include <linux/memblock.h>
 
 #include <asm/prom.h>
 #include <asm/iommu.h>
@@ -845,10 +845,10 @@ static int __init cell_iommu_init_disabled(void)
 	/* If we found a DMA window, we check if it's big enough to enclose
 	 * all of physical memory. If not, we force enable IOMMU
 	 */
-	if (np && size < lmb_end_of_DRAM()) {
+	if (np && size < memblock_end_of_DRAM()) {
 		printk(KERN_WARNING "iommu: force-enabled, dma window"
 		       " (%ldMB) smaller than total memory (%lldMB)\n",
-		       size >> 20, lmb_end_of_DRAM() >> 20);
+		       size >> 20, memblock_end_of_DRAM() >> 20);
 		return -ENODEV;
 	}
 
@@ -1064,7 +1064,7 @@ static int __init cell_iommu_fixed_mapping_init(void)
 	}
 
 	fbase = _ALIGN_UP(fbase, 1 << IO_SEGMENT_SHIFT);
-	fsize = lmb_phys_mem_size();
+	fsize = memblock_phys_mem_size();
 
 	if ((fbase + fsize) <= 0x800000000ul)
 		hbase = 0; /* use the device tree window */
@@ -1169,7 +1169,7 @@ static int __init cell_iommu_init(void)
 	 * Note: should we make sure we have the IOMMU actually disabled ?
 	 */
 	if (iommu_is_off ||
-	    (!iommu_force_on && lmb_end_of_DRAM() <= 0x80000000ull))
+	    (!iommu_force_on && memblock_end_of_DRAM() <= 0x80000000ull))
 		if (cell_iommu_init_disabled() == 0)
 			goto bail;