Linux 2.6.32-rc6

* 'for-linus' of git://github.com/at91linux/linux-2.6-at91:
  at91: at91sam9g45 family: identify several chip versions
  avr32: add two new at91 to cpu.h definition

Documentation/ABI/testing/sysfs-bus-pci-devices-cciss

@@ -31,3 +31,31 @@ Date:		March 2009
 Kernel Version: 2.6.30
 Contact:	iss_storagedev@hp.com
 Description:	A symbolic link to /sys/block/cciss!cXdY
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/rescan
+Date:		August 2009
+Kernel Version:	2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Kicks of a rescan of the controller to discover logical
+		drive topology changes.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/lunid
+Date:		August 2009
+Kernel Version: 2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Displays the 8-byte LUN ID used to address logical
+		drive Y of controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/raid_level
+Date:		August 2009
+Kernel Version: 2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Displays the RAID level of logical drive Y of
+		controller X.
+
+Where:		/sys/bus/pci/devices/<dev>/ccissX/cXdY/usage_count
+Date:		August 2009
+Kernel Version: 2.6.31
+Contact:	iss_storagedev@hp.com
+Description:	Displays the usage count (number of opens) of logical drive Y
+		of controller X.

Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc

@@ -1,4 +1,4 @@
-What:           /sys/class/usb_host/usb_hostN/wusb_chid
+What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_chid
 Date:           July 2008
 KernelVersion:  2.6.27
 Contact:        David Vrabel <david.vrabel@csr.com>
@@ -9,7 +9,7 @@ Description:
 
                 Set an all zero CHID to stop the host controller.
 
-What:           /sys/class/usb_host/usb_hostN/wusb_trust_timeout
+What:           /sys/class/uwb_rc/uwbN/wusbhc/wusb_trust_timeout
 Date:           July 2008
 KernelVersion:  2.6.27
 Contact:        David Vrabel <david.vrabel@csr.com>

Documentation/ABI/testing/sysfs-devices-cache_disable

@@ -1,18 +0,0 @@
-What:      /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X
-Date:      August 2008
-KernelVersion:	2.6.27
-Contact:	mark.langsdorf@amd.com
-Description:	These files exist in every cpu's cache index directories.
-		There are currently 2 cache_disable_# files in each
-		directory.  Reading from these files on a supported
-		processor will return that cache disable index value
-		for that processor and node.  Writing to one of these
-		files will cause the specificed cache index to be disabled.
-
-		Currently, only AMD Family 10h Processors support cache index
-		disable, and only for their L3 caches.  See the BIOS and
-		Kernel Developer's Guide at
-		http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf
-		for formatting information and other details on the
-		cache index disable.
-Users:    joachim.deguara@amd.com

Documentation/ABI/testing/sysfs-devices-system-cpu

@@ -0,0 +1,156 @@
+What:		/sys/devices/system/cpu/
+Date:		pre-git history
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:
+		A collection of both global and individual CPU attributes
+
+		Individual CPU attributes are contained in subdirectories
+		named by the kernel's logical CPU number, e.g.:
+
+		/sys/devices/system/cpu/cpu#/
+
+What:		/sys/devices/system/cpu/sched_mc_power_savings
+		/sys/devices/system/cpu/sched_smt_power_savings
+Date:		June 2006
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	Discover and adjust the kernel's multi-core scheduler support.
+
+		Possible values are:
+
+		0 - No power saving load balance (default value)
+		1 - Fill one thread/core/package first for long running threads
+		2 - Also bias task wakeups to semi-idle cpu package for power
+		    savings
+
+		sched_mc_power_savings is dependent upon SCHED_MC, which is
+		itself architecture dependent.
+
+		sched_smt_power_savings is dependent upon SCHED_SMT, which
+		is itself architecture dependent.
+
+		The two files are independent of each other. It is possible
+		that one file may be present without the other.
+
+		Introduced by git commit 5c45bf27.
+
+
+What:		/sys/devices/system/cpu/kernel_max
+		/sys/devices/system/cpu/offline
+		/sys/devices/system/cpu/online
+		/sys/devices/system/cpu/possible
+		/sys/devices/system/cpu/present
+Date:		December 2008
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	CPU topology files that describe kernel limits related to
+		hotplug. Briefly:
+
+		kernel_max: the maximum cpu index allowed by the kernel
+		configuration.
+
+		offline: cpus that are not online because they have been
+		HOTPLUGGED off or exceed the limit of cpus allowed by the
+		kernel configuration (kernel_max above).
+
+		online: cpus that are online and being scheduled.
+
+		possible: cpus that have been allocated resources and can be
+		brought online if they are present.
+
+		present: cpus that have been identified as being present in
+		the system.
+
+		See Documentation/cputopology.txt for more information.
+
+
+
+What:		/sys/devices/system/cpu/cpu#/node
+Date:		October 2009
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Discover NUMA node a CPU belongs to
+
+		When CONFIG_NUMA is enabled, a symbolic link that points
+		to the corresponding NUMA node directory.
+
+		For example, the following symlink is created for cpu42
+		in NUMA node 2:
+
+		/sys/devices/system/cpu/cpu42/node2 -> ../../node/node2
+
+
+What:		/sys/devices/system/cpu/cpu#/topology/core_id
+		/sys/devices/system/cpu/cpu#/topology/core_siblings
+		/sys/devices/system/cpu/cpu#/topology/core_siblings_list
+		/sys/devices/system/cpu/cpu#/topology/physical_package_id
+		/sys/devices/system/cpu/cpu#/topology/thread_siblings
+		/sys/devices/system/cpu/cpu#/topology/thread_siblings_list
+Date:		December 2008
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	CPU topology files that describe a logical CPU's relationship
+		to other cores and threads in the same physical package.
+
+		One cpu# directory is created per logical CPU in the system,
+		e.g. /sys/devices/system/cpu/cpu42/.
+
+		Briefly, the files above are:
+
+		core_id: the CPU core ID of cpu#. Typically it is the
+		hardware platform's identifier (rather than the kernel's).
+		The actual value is architecture and platform dependent.
+
+		core_siblings: internal kernel map of cpu#'s hardware threads
+		within the same physical_package_id.
+
+		core_siblings_list: human-readable list of the logical CPU
+		numbers within the same physical_package_id as cpu#.
+
+		physical_package_id: physical package id of cpu#. Typically
+		corresponds to a physical socket number, but the actual value
+		is architecture and platform dependent.
+
+		thread_siblings: internel kernel map of cpu#'s hardware
+		threads within the same core as cpu#
+
+		thread_siblings_list: human-readable list of cpu#'s hardware
+		threads within the same core as cpu#
+
+		See Documentation/cputopology.txt for more information.
+
+
+What:		/sys/devices/system/cpu/cpuidle/current_driver
+		/sys/devices/system/cpu/cpuidle/current_governer_ro
+Date:		September 2007
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	Discover cpuidle policy and mechanism
+
+		Various CPUs today support multiple idle levels that are
+		differentiated by varying exit latencies and power
+		consumption during idle.
+
+		Idle policy (governor) is differentiated from idle mechanism
+		(driver)
+
+		current_driver: displays current idle mechanism
+
+		current_governor_ro: displays current idle policy
+
+		See files in Documentation/cpuidle/ for more information.
+
+
+What:      /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X
+Date:      August 2008
+KernelVersion:	2.6.27
+Contact:	mark.langsdorf@amd.com
+Description:	These files exist in every cpu's cache index directories.
+		There are currently 2 cache_disable_# files in each
+		directory.  Reading from these files on a supported
+		processor will return that cache disable index value
+		for that processor and node.  Writing to one of these
+		files will cause the specificed cache index to be disabled.
+
+		Currently, only AMD Family 10h Processors support cache index
+		disable, and only for their L3 caches.  See the BIOS and
+		Kernel Developer's Guide at
+		http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf
+		for formatting information and other details on the
+		cache index disable.
+Users:    joachim.deguara@amd.com

Documentation/SubmittingPatches

@@ -232,7 +232,7 @@ your e-mail client so that it sends your patches untouched.
 When sending patches to Linus, always follow step #7.
 
 Large changes are not appropriate for mailing lists, and some
-maintainers.  If your patch, uncompressed, exceeds 40 kB in size,
+maintainers.  If your patch, uncompressed, exceeds 300 kB in size,
 it is preferred that you store your patch on an Internet-accessible
 server, and provide instead a URL (link) pointing to your patch.
 

Documentation/arm/tcm.txt

@@ -29,11 +29,13 @@ TCM location and size. Notice that this is not a MMU table: you
 actually move the physical location of the TCM around. At the
 place you put it, it will mask any underlying RAM from the
 CPU so it is usually wise not to overlap any physical RAM with
-the TCM. The TCM memory exists totally outside the MMU and will
-override any MMU mappings.
+the TCM.
 
-Code executing inside the ITCM does not "see" any MMU mappings
-and e.g. register accesses must be made to physical addresses.
+The TCM memory can then be remapped to another address again using
+the MMU, but notice that the TCM if often used in situations where
+the MMU is turned off. To avoid confusion the current Linux
+implementation will map the TCM 1 to 1 from physical to virtual
+memory in the location specified by the machine.
 
 TCM is used for a few things:
 

Documentation/cgroups/cgroups.txt

@@ -227,7 +227,14 @@ as the path relative to the root of the cgroup file system.
 Each cgroup is represented by a directory in the cgroup file system
 containing the following files describing that cgroup:
 
- - tasks: list of tasks (by pid) attached to that cgroup
+ - tasks: list of tasks (by pid) attached to that cgroup.  This list
+   is not guaranteed to be sorted.  Writing a thread id into this file
+   moves the thread into this cgroup.
+ - cgroup.procs: list of tgids in the cgroup.  This list is not
+   guaranteed to be sorted or free of duplicate tgids, and userspace
+   should sort/uniquify the list if this property is required.
+   Writing a tgid into this file moves all threads with that tgid into
+   this cgroup.
  - notify_on_release flag: run the release agent on exit?
  - release_agent: the path to use for release notifications (this file
    exists in the top cgroup only)
@@ -374,7 +381,7 @@ Now you want to do something with this cgroup.
 
 In this directory you can find several files:
 # ls
-notify_on_release tasks
+cgroup.procs notify_on_release tasks
 (plus whatever files added by the attached subsystems)
 
 Now attach your shell to this cgroup:

Documentation/connector/cn_test.c

@@ -34,7 +34,7 @@ static char cn_test_name[] = "cn_test";
 static struct sock *nls;
 static struct timer_list cn_test_timer;
 
-static void cn_test_callback(struct cn_msg *msg)
+static void cn_test_callback(struct cn_msg *msg, struct netlink_skb_parms *nsp)
 {
 	pr_info("%s: %lu: idx=%x, val=%x, seq=%u, ack=%u, len=%d: %s.\n",
 	        __func__, jiffies, msg->id.idx, msg->id.val,

Documentation/connector/connector.txt

@@ -23,7 +23,7 @@ handling, etc...  The Connector driver allows any kernelspace agents to use
 netlink based networking for inter-process communication in a significantly
 easier way:
 
-int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *));
+int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
 void cn_netlink_send(struct cn_msg *msg, u32 __group, int gfp_mask);
 
 struct cb_id
@@ -53,15 +53,15 @@ struct cn_msg
 Connector interfaces.
 /*****************************************/
 
-int cn_add_callback(struct cb_id *id, char *name, void (*callback) (void *));
+int cn_add_callback(struct cb_id *id, char *name, void (*callback) (struct cn_msg *, struct netlink_skb_parms *));
 
  Registers new callback with connector core.
 
  struct cb_id *id		- unique connector's user identifier.
 				  It must be registered in connector.h for legal in-kernel users.
  char *name			- connector's callback symbolic name.
- void (*callback) (void *)	- connector's callback.
-				  Argument must be dereferenced to struct cn_msg *.
+ void (*callback) (struct cn..)	- connector's callback.
+				  cn_msg and the sender's credentials
 
 
 void cn_del_callback(struct cb_id *id);

Documentation/cputopology.txt

@@ -1,15 +1,28 @@
 
-Export cpu topology info via sysfs. Items (attributes) are similar
+Export CPU topology info via sysfs. Items (attributes) are similar
 to /proc/cpuinfo.
 
 1) /sys/devices/system/cpu/cpuX/topology/physical_package_id:
-represent the physical package id of  cpu X;
+
+	physical package id of cpuX. Typically corresponds to a physical
+	socket number, but the actual value is architecture and platform
+	dependent.
+
 2) /sys/devices/system/cpu/cpuX/topology/core_id:
-represent the cpu core id to cpu X;
+
+	the CPU core ID of cpuX. Typically it is the hardware platform's
+	identifier (rather than the kernel's).  The actual value is
+	architecture and platform dependent.
+
 3) /sys/devices/system/cpu/cpuX/topology/thread_siblings:
-represent the thread siblings to cpu X in the same core;
+
+	internel kernel map of cpuX's hardware threads within the same
+	core as cpuX
+
 4) /sys/devices/system/cpu/cpuX/topology/core_siblings:
-represent the thread siblings to cpu X in the same physical package;
+
+	internal kernel map of cpuX's hardware threads within the same
+	physical_package_id.
 
 To implement it in an architecture-neutral way, a new source file,
 drivers/base/topology.c, is to export the 4 attributes.
@@ -32,32 +45,32 @@ not defined by include/asm-XXX/topology.h:
 3) thread_siblings: just the given CPU
 4) core_siblings: just the given CPU
 
-Additionally, cpu topology information is provided under
+Additionally, CPU topology information is provided under
 /sys/devices/system/cpu and includes these files.  The internal
 source for the output is in brackets ("[]").
 
-    kernel_max: the maximum cpu index allowed by the kernel configuration.
+    kernel_max: the maximum CPU index allowed by the kernel configuration.
 		[NR_CPUS-1]
 
-    offline:	cpus that are not online because they have been
+    offline:	CPUs that are not online because they have been
 		HOTPLUGGED off (see cpu-hotplug.txt) or exceed the limit
-		of cpus allowed by the kernel configuration (kernel_max
+		of CPUs allowed by the kernel configuration (kernel_max
 		above). [~cpu_online_mask + cpus >= NR_CPUS]
 
-    online:	cpus that are online and being scheduled [cpu_online_mask]
+    online:	CPUs that are online and being scheduled [cpu_online_mask]
 
-    possible:	cpus that have been allocated resources and can be
+    possible:	CPUs that have been allocated resources and can be
 		brought online if they are present. [cpu_possible_mask]
 
-    present:	cpus that have been identified as being present in the
+    present:	CPUs that have been identified as being present in the
 		system. [cpu_present_mask]
 
 The format for the above output is compatible with cpulist_parse()
 [see <linux/cpumask.h>].  Some examples follow.
 
-In this example, there are 64 cpus in the system but cpus 32-63 exceed
+In this example, there are 64 CPUs in the system but cpus 32-63 exceed
 the kernel max which is limited to 0..31 by the NR_CPUS config option
-being 32.  Note also that cpus 2 and 4-31 are not online but could be
+being 32.  Note also that CPUs 2 and 4-31 are not online but could be
 brought online as they are both present and possible.
 
      kernel_max: 31
@@ -67,8 +80,8 @@ brought online as they are both present and possible.
         present: 0-31
 
 In this example, the NR_CPUS config option is 128, but the kernel was
-started with possible_cpus=144.  There are 4 cpus in the system and cpu2
-was manually taken offline (and is the only cpu that can be brought
+started with possible_cpus=144.  There are 4 CPUs in the system and cpu2
+was manually taken offline (and is the only CPU that can be brought
 online.)
 
      kernel_max: 127
@@ -78,4 +91,4 @@ online.)
         present: 0-3
 
 See cpu-hotplug.txt for the possible_cpus=NUM kernel start parameter
-as well as more information on the various cpumask's.
+as well as more information on the various cpumasks.

Documentation/debugging-via-ohci1394.txt

@@ -64,14 +64,14 @@ be used to view the printk buffer of a remote machine, even with live update.
 
 Bernhard Kaindl enhanced firescope to support accessing 64-bit machines
 from 32-bit firescope and vice versa:
-- ftp://ftp.suse.de/private/bk/firewire/tools/firescope-0.2.2.tar.bz2
+- http://halobates.de/firewire/firescope-0.2.2.tar.bz2
 
 and he implemented fast system dump (alpha version - read README.txt):
-- ftp://ftp.suse.de/private/bk/firewire/tools/firedump-0.1.tar.bz2
+- http://halobates.de/firewire/firedump-0.1.tar.bz2
 
 There is also a gdb proxy for firewire which allows to use gdb to access
 data which can be referenced from symbols found by gdb in vmlinux:
-- ftp://ftp.suse.de/private/bk/firewire/tools/fireproxy-0.33.tar.bz2
+- http://halobates.de/firewire/fireproxy-0.33.tar.bz2
 
 The latest version of this gdb proxy (fireproxy-0.34) can communicate (not
 yet stable) with kgdb over an memory-based communication module (kgdbom).
@@ -178,7 +178,7 @@ Step-by-step instructions for using firescope with early OHCI initialization:
 
 Notes
 -----
-Documentation and specifications: ftp://ftp.suse.de/private/bk/firewire/docs
+Documentation and specifications: http://halobates.de/firewire/
 
 FireWire is a trademark of Apple Inc. - for more information please refer to:
 http://en.wikipedia.org/wiki/FireWire

Documentation/feature-removal-schedule.txt

@@ -418,6 +418,14 @@ When:	2.6.33
 Why:	Should be implemented in userspace, policy daemon.
 Who:	Johannes Berg <johannes@sipsolutions.net>
 
+---------------------------
+
+What:	CONFIG_INOTIFY
+When:	2.6.33
+Why:	last user (audit) will be converted to the newer more generic
+	and more easily maintained fsnotify subsystem
+Who:	Eric Paris <eparis@redhat.com>
+
 ----------------------------
 
 What:	lock_policy_rwsem_* and unlock_policy_rwsem_* will not be
@@ -451,3 +459,33 @@ Why:	OSS sound_core grabs all legacy minors (0-255) of SOUND_MAJOR
 	will also allow making ALSA OSS emulation independent of
 	sound_core.  The dependency will be broken then too.
 Who:	Tejun Heo <tj@kernel.org>
+
+----------------------------
+
+What:	Support for VMware's guest paravirtuliazation technique [VMI] will be
+	dropped.
+When:	2.6.37 or earlier.
+Why:	With the recent innovations in CPU hardware acceleration technologies
+	from Intel and AMD, VMware ran a few experiments to compare these
+	techniques to guest paravirtualization technique on VMware's platform.
+	These hardware assisted virtualization techniques have outperformed the
+	performance benefits provided by VMI in most of the workloads. VMware
+	expects that these hardware features will be ubiquitous in a couple of
+	years, as a result, VMware has started a phased retirement of this
+	feature from the hypervisor. We will be removing this feature from the
+	Kernel too. Right now we are targeting 2.6.37 but can retire earlier if
+	technical reasons (read opportunity to remove major chunk of pvops)
+	arise.
+
+	Please note that VMI has always been an optimization and non-VMI kernels
+	still work fine on VMware's platform.
+	Latest versions of VMware's product which support VMI are,
+	Workstation 7.0 and VSphere 4.0 on ESX side, future maintainence
+	releases for these products will continue supporting VMI.
+
+	For more details about VMI retirement take a look at this,
+	http://blogs.vmware.com/guestosguide/2009/09/vmi-retirement.html
+
+Who:	Alok N Kataria <akataria@vmware.com>
+
+----------------------------

Documentation/filesystems/ext3.txt

@@ -123,10 +123,18 @@ resuid=n		The user ID which may use the reserved blocks.
 
 sb=n			Use alternate superblock at this location.
 
-quota
-noquota
-grpquota
-usrquota
+quota			These options are ignored by the filesystem. They
+noquota			are used only by quota tools to recognize volumes
+grpquota		where quota should be turned on. See documentation
+usrquota		in the quota-tools package for more details
+			(http://sourceforge.net/projects/linuxquota).
+
+jqfmt=<quota type>	These options tell filesystem details about quota
+usrjquota=<file>	so that quota information can be properly updated
+grpjquota=<file>	during journal replay. They replace the above
+			quota options. See documentation in the quota-tools
+			package for more details
+			(http://sourceforge.net/projects/linuxquota).
 
 bh		(*)	ext3 associates buffer heads to data pages to
 nobh			(a) cache disk block mapping information

Documentation/filesystems/ext4.txt

@@ -134,9 +134,15 @@ ro                   	Mount filesystem read only. Note that ext4 will
                      	mount options "ro,noload" can be used to prevent
 		     	writes to the filesystem.
 
+journal_checksum	Enable checksumming of the journal transactions.
+			This will allow the recovery code in e2fsck and the
+			kernel to detect corruption in the kernel.  It is a
+			compatible change and will be ignored by older kernels.
+
 journal_async_commit	Commit block can be written to disk without waiting
 			for descriptor blocks. If enabled older kernels cannot
-			mount the device.
+			mount the device. This will enable 'journal_checksum'
+			internally.
 
 journal=update		Update the ext4 file system's journal to the current
 			format.
@@ -282,9 +288,16 @@ stripe=n		Number of filesystem blocks that mballoc will try
 			to use for allocation size and alignment. For RAID5/6
 			systems this should be the number of data
 			disks *  RAID chunk size in file system blocks.
-delalloc	(*)	Deferring block allocation until write-out time.
-nodelalloc		Disable delayed allocation. Blocks are allocation
-			when data is copied from user to page cache.
+
+delalloc	(*)	Defer block allocation until just before ext4
+			writes out the block(s) in question.  This
+			allows ext4 to better allocation decisions
+			more efficiently.
+nodelalloc		Disable delayed allocation.  Blocks are allocated
+			when the data is copied from userspace to the
+			page cache, either via the write(2) system call
+			or when an mmap'ed page which was previously
+			unallocated is written for the first time.
 
 max_batch_time=usec	Maximum amount of time ext4 should wait for
 			additional filesystem operations to be batch

Documentation/filesystems/proc.txt

@@ -1113,7 +1113,6 @@ Table 1-12: Files in /proc/fs/ext4/<devname>
 ..............................................................................
  File            Content                                        
  mb_groups       details of multiblock allocator buddy cache of free blocks
- mb_history      multiblock allocation history
 ..............................................................................
 
 

Documentation/filesystems/vfat.txt

@@ -102,7 +102,7 @@ shortname=lower|win95|winnt|mixed
 		 winnt: emulate the Windows NT rule for display/create.
 		 mixed: emulate the Windows NT rule for display,
 			emulate the Windows 95 rule for create.
-		 Default setting is `lower'.
+		 Default setting is `mixed'.
 
 tz=UTC        -- Interpret timestamps as UTC rather than local time.
                  This option disables the conversion of timestamps

Documentation/flexible-arrays.txt

@@ -1,5 +1,5 @@
 Using flexible arrays in the kernel
-Last updated for 2.6.31
+Last updated for 2.6.32
 Jonathan Corbet <corbet@lwn.net>
 
 Large contiguous memory allocations can be unreliable in the Linux kernel.
@@ -40,6 +40,13 @@ argument is passed directly to the internal memory allocation calls.  With
 the current code, using flags to ask for high memory is likely to lead to
 notably unpleasant side effects.
 
+It is also possible to define flexible arrays at compile time with:
+
+    DEFINE_FLEX_ARRAY(name, element_size, total);
+
+This macro will result in a definition of an array with the given name; the
+element size and total will be checked for validity at compile time.
+
 Storing data into a flexible array is accomplished with a call to:
 
     int flex_array_put(struct flex_array *array, unsigned int element_nr,
@@ -76,16 +83,30 @@ particular element has never been allocated.
 Note that it is possible to get back a valid pointer for an element which
 has never been stored in the array.  Memory for array elements is allocated
 one page at a time; a single allocation could provide memory for several
-adjacent elements.  The flexible array code does not know if a specific
-element has been written; it only knows if the associated memory is
-present.  So a flex_array_get() call on an element which was never stored
-in the array has the potential to return a pointer to random data.  If the
-caller does not have a separate way to know which elements were actually
-stored, it might be wise, at least, to add GFP_ZERO to the flags argument
-to ensure that all elements are zeroed.
+adjacent elements.  Flexible array elements are normally initialized to the
+value FLEX_ARRAY_FREE (defined as 0x6c in <linux/poison.h>), so errors
+involving that number probably result from use of unstored array entries.
+Note that, if array elements are allocated with __GFP_ZERO, they will be
+initialized to zero and this poisoning will not happen.
 
-There is no way to remove a single element from the array.  It is possible,
-though, to remove all elements with a call to:
+Individual elements in the array can be cleared with:
+
+    int flex_array_clear(struct flex_array *array, unsigned int element_nr);
+
+This function will set the given element to FLEX_ARRAY_FREE and return
+zero.  If storage for the indicated element is not allocated for the array,
+flex_array_clear() will return -EINVAL instead.  Note that clearing an
+element does not release the storage associated with it; to reduce the
+allocated size of an array, call:
+
+    int flex_array_shrink(struct flex_array *array);
+
+The return value will be the number of pages of memory actually freed.
+This function works by scanning the array for pages containing nothing but
+FLEX_ARRAY_FREE bytes, so (1) it can be expensive, and (2) it will not work
+if the array's pages are allocated with __GFP_ZERO.
+
+It is possible to remove all elements of an array with a call to:
 
     void flex_array_free_parts(struct flex_array *array);
 

Documentation/hwmon/ltc4215

@@ -22,12 +22,13 @@ Usage Notes
 -----------
 
 This driver does not probe for LTC4215 devices, due to the fact that some
-of the possible addresses are unfriendly to probing. You will need to use
-the "force" parameter to tell the driver where to find the device.
+of the possible addresses are unfriendly to probing. You will have to
+instantiate the devices explicitly.
 
 Example: the following will load the driver for an LTC4215 at address 0x44
 on I2C bus #0:
-$ modprobe ltc4215 force=0,0x44
+$ modprobe ltc4215
+$ echo ltc4215 0x44 > /sys/bus/i2c/devices/i2c-0/new_device
 
 
 Sysfs entries

Documentation/hwmon/ltc4245

@@ -23,12 +23,13 @@ Usage Notes
 -----------
 
 This driver does not probe for LTC4245 devices, due to the fact that some
-of the possible addresses are unfriendly to probing. You will need to use
-the "force" parameter to tell the driver where to find the device.
+of the possible addresses are unfriendly to probing. You will have to
+instantiate the devices explicitly.
 
 Example: the following will load the driver for an LTC4245 at address 0x23
 on I2C bus #1:
-$ modprobe ltc4245 force=1,0x23
+$ modprobe ltc4245
+$ echo ltc4245 0x23 > /sys/bus/i2c/devices/i2c-1/new_device
 
 
 Sysfs entries

Documentation/hwmon/sysfs-interface

@@ -353,10 +353,20 @@ power[1-*]_average		Average power use
 				Unit: microWatt
 				RO
 
-power[1-*]_average_interval	Power use averaging interval
+power[1-*]_average_interval	Power use averaging interval.  A poll
+				notification is sent to this file if the
+				hardware changes the averaging interval.
 				Unit: milliseconds
 				RW
 
+power[1-*]_average_interval_max	Maximum power use averaging interval
+				Unit: milliseconds
+				RO
+
+power[1-*]_average_interval_min	Minimum power use averaging interval
+				Unit: milliseconds
+				RO
+
 power[1-*]_average_highest	Historical average maximum power use
 				Unit: microWatt
 				RO
@@ -365,6 +375,18 @@ power[1-*]_average_lowest	Historical average minimum power use
 				Unit: microWatt
 				RO
 
+power[1-*]_average_max		A poll notification is sent to
+				power[1-*]_average when power use
+				rises above this value.
+				Unit: microWatt
+				RW
+
+power[1-*]_average_min		A poll notification is sent to
+				power[1-*]_average when power use
+				sinks below this value.
+				Unit: microWatt
+				RW
+
 power[1-*]_input		Instantaneous power use
 				Unit: microWatt
 				RO
@@ -381,6 +403,39 @@ power[1-*]_reset_history	Reset input_highest, input_lowest,
 				average_highest and average_lowest.
 				WO
 
+power[1-*]_accuracy		Accuracy of the power meter.
+				Unit: Percent
+				RO
+
+power[1-*]_alarm		1 if the system is drawing more power than the
+				cap allows; 0 otherwise.  A poll notification is
+				sent to this file when the power use exceeds the
+				cap.  This file only appears if the cap is known
+				to be enforced by hardware.
+				RO
+
+power[1-*]_cap			If power use rises above this limit, the
+				system should take action to reduce power use.
+				A poll notification is sent to this file if the
+				cap is changed by the hardware.  The *_cap
+				files only appear if the cap is known to be
+				enforced by hardware.
+				Unit: microWatt
+				RW
+
+power[1-*]_cap_hyst		Margin of hysteresis built around capping and
+				notification.
+				Unit: microWatt
+				RW
+
+power[1-*]_cap_max		Maximum cap that can be set.
+				Unit: microWatt
+				RO
+
+power[1-*]_cap_min		Minimum cap that can be set.
+				Unit: microWatt
+				RO
+
 **********
 * Energy *
 **********

Documentation/i2c/instantiating-devices

@@ -188,7 +188,7 @@ segment, the address is sufficient to uniquely identify the device to be
 deleted.
 
 Example:
-# echo eeprom 0x50 > /sys/class/i2c-adapter/i2c-3/new_device
+# echo eeprom 0x50 > /sys/bus/i2c/devices/i2c-3/new_device
 
 While this interface should only be used when in-kernel device declaration
 can't be done, there is a variety of cases where it can be helpful:

Documentation/infiniband/user_mad.txt

@@ -128,8 +128,8 @@ Setting IsSM Capability Bit
   To create the appropriate character device files automatically with
   udev, a rule like
 
-    KERNEL="umad*", NAME="infiniband/%k"
-    KERNEL="issm*", NAME="infiniband/%k"
+    KERNEL=="umad*", NAME="infiniband/%k"
+    KERNEL=="issm*", NAME="infiniband/%k"
 
   can be used.  This will create device nodes named
 

Documentation/infiniband/user_verbs.txt

@@ -58,7 +58,7 @@ Memory pinning
   To create the appropriate character device files automatically with
   udev, a rule like
 
-    KERNEL="uverbs*", NAME="infiniband/%k"
+    KERNEL=="uverbs*", NAME="infiniband/%k"
 
   can be used.  This will create device nodes named
 

Documentation/isdn/INTERFACE.CAPI

@@ -60,10 +60,9 @@ open() operation on regular files or character devices.
 
 After a successful return from register_appl(), CAPI messages from the
 application may be passed to the driver for the device via calls to the
-send_message() callback function. The CAPI message to send is stored in the
-data portion of an skb. Conversely, the driver may call Kernel CAPI's
-capi_ctr_handle_message() function to pass a received CAPI message to Kernel
-CAPI for forwarding to an application, specifying its ApplID.
+send_message() callback function. Conversely, the driver may call Kernel
+CAPI's capi_ctr_handle_message() function to pass a received CAPI message to
+Kernel CAPI for forwarding to an application, specifying its ApplID.
 
 Deregistration requests (CAPI operation CAPI_RELEASE) from applications are
 forwarded as calls to the release_appl() callback function, passing the same
@@ -142,6 +141,7 @@ u16  (*send_message)(struct capi_ctr *ctrlr, struct sk_buff *skb)
 	to accepting or queueing the message. Errors occurring during the
 	actual processing of the message should be signaled with an
 	appropriate reply message.
+	May be called in process or interrupt context.
 	Calls to this function are not serialized by Kernel CAPI, ie. it must
 	be prepared to be re-entered.
 
@@ -154,7 +154,8 @@ read_proc_t *ctr_read_proc
 	system entry, /proc/capi/controllers/<n>; will be called with a
 	pointer to the device's capi_ctr structure as the last (data) argument
 
-Note: Callback functions are never called in interrupt context.
+Note: Callback functions except send_message() are never called in interrupt
+context.
 
 - to be filled in before calling capi_ctr_ready():
 
@@ -171,14 +172,40 @@ u8 serial[CAPI_SERIAL_LEN]
 	value to return for CAPI_GET_SERIAL
 
 
-4.3 The _cmsg Structure
+4.3 SKBs
+
+CAPI messages are passed between Kernel CAPI and the driver via send_message()
+and capi_ctr_handle_message(), stored in the data portion of a socket buffer
+(skb).  Each skb contains a single CAPI message coded according to the CAPI 2.0
+standard.
+
+For the data transfer messages, DATA_B3_REQ and DATA_B3_IND, the actual
+payload data immediately follows the CAPI message itself within the same skb.
+The Data and Data64 parameters are not used for processing. The Data64
+parameter may be omitted by setting the length field of the CAPI message to 22
+instead of 30.
+
+
+4.4 The _cmsg Structure
 
 (declared in <linux/isdn/capiutil.h>)
 
 The _cmsg structure stores the contents of a CAPI 2.0 message in an easily
-accessible form. It contains members for all possible CAPI 2.0 parameters, of
-which only those appearing in the message type currently being processed are
-actually used. Unused members should be set to zero.
+accessible form. It contains members for all possible CAPI 2.0 parameters,
+including subparameters of the Additional Info and B Protocol structured
+parameters, with the following exceptions:
+
+* second Calling party number (CONNECT_IND)
+
+* Data64 (DATA_B3_REQ and DATA_B3_IND)
+
+* Sending complete (subparameter of Additional Info, CONNECT_REQ and INFO_REQ)
+
+* Global Configuration (subparameter of B Protocol, CONNECT_REQ, CONNECT_RESP
+  and SELECT_B_PROTOCOL_REQ)
+
+Only those parameters appearing in the message type currently being processed
+are actually used. Unused members should be set to zero.
 
 Members are named after the CAPI 2.0 standard names of the parameters they
 represent. See <linux/isdn/capiutil.h> for the exact spelling. Member data
@@ -190,18 +217,19 @@ u16         for CAPI parameters of type 'word'
 
 u32         for CAPI parameters of type 'dword'
 
-_cstruct    for CAPI parameters of type 'struct' not containing any
-	    variably-sized (struct) subparameters (eg. 'Called Party Number')
+_cstruct    for CAPI parameters of type 'struct'
 	    The member is a pointer to a buffer containing the parameter in
 	    CAPI encoding (length + content). It may also be NULL, which will
 	    be taken to represent an empty (zero length) parameter.
+	    Subparameters are stored in encoded form within the content part.
 
-_cmstruct   for CAPI parameters of type 'struct' containing 'struct'
-	    subparameters ('Additional Info' and 'B Protocol')
+_cmstruct   alternative representation for CAPI parameters of type 'struct'
+	    (used only for the 'Additional Info' and 'B Protocol' parameters)
 	    The representation is a single byte containing one of the values:
-	    CAPI_DEFAULT: the parameter is empty
-	    CAPI_COMPOSE: the values of the subparameters are stored
-	    individually in the corresponding _cmsg structure members
+	    CAPI_DEFAULT: The parameter is empty/absent.
+	    CAPI_COMPOSE: The parameter is present.
+	    Subparameter values are stored individually in the corresponding
+	    _cmsg structure members.
 
 Functions capi_cmsg2message() and capi_message2cmsg() are provided to convert
 messages between their transport encoding described in the CAPI 2.0 standard
@@ -297,3 +325,26 @@ char *capi_cmd2str(u8 Command, u8 Subcommand)
 	be NULL if the command/subcommand is not one of those defined in the
 	CAPI 2.0 standard.
 
+
+7. Debugging
+
+The module kernelcapi has a module parameter showcapimsgs controlling some
+debugging output produced by the module. It can only be set when the module is
+loaded, via a parameter "showcapimsgs=<n>" to the modprobe command, either on
+the command line or in the configuration file.
+
+If the lowest bit of showcapimsgs is set, kernelcapi logs controller and
+application up and down events.
+
+In addition, every registered CAPI controller has an associated traceflag
+parameter controlling how CAPI messages sent from and to tha controller are
+logged. The traceflag parameter is initialized with the value of the
+showcapimsgs parameter when the controller is registered, but can later be
+changed via the MANUFACTURER_REQ command KCAPI_CMD_TRACE.
+
+If the value of traceflag is non-zero, CAPI messages are logged.
+DATA_B3 messages are only logged if the value of traceflag is > 2.
+
+If the lowest bit of traceflag is set, only the command/subcommand and message
+length are logged. Otherwise, kernelcapi logs a readable representation of
+the entire message.

Documentation/kernel-parameters.txt

@@ -671,6 +671,7 @@ and is between 256 and 4096 characters. It is defined in the file
 	earlyprintk=	[X86,SH,BLACKFIN]
 			earlyprintk=vga
 			earlyprintk=serial[,ttySn[,baudrate]]
+			earlyprintk=ttySn[,baudrate]
 			earlyprintk=dbgp[debugController#]
 
 			Append ",keep" to not disable it when the real console

Documentation/lguest/lguest.c

@@ -42,7 +42,6 @@
 #include <signal.h>
 #include "linux/lguest_launcher.h"
 #include "linux/virtio_config.h"
-#include <linux/virtio_ids.h>
 #include "linux/virtio_net.h"
 #include "linux/virtio_blk.h"
 #include "linux/virtio_console.h"

Documentation/misc-devices/max6875

@@ -42,10 +42,12 @@ General Remarks
 
 Valid addresses for the MAX6875 are 0x50 and 0x52.
 Valid addresses for the MAX6874 are 0x50, 0x52, 0x54 and 0x56.
-The driver does not probe any address, so you must force the address.
+The driver does not probe any address, so you explicitly instantiate the
+devices.
 
 Example:
-$ modprobe max6875 force=0,0x50
+$ modprobe max6875
+$ echo max6875 0x50 > /sys/bus/i2c/devices/i2c-0/new_device
 
 The MAX6874/MAX6875 ignores address bit 0, so this driver attaches to multiple
 addresses.  For example, for address 0x50, it also reserves 0x51.

Documentation/networking/pktgen.txt

@@ -90,6 +90,11 @@ Examples:
  pgset "dstmac 00:00:00:00:00:00"    sets MAC destination address
  pgset "srcmac 00:00:00:00:00:00"    sets MAC source address
 
+ pgset "queue_map_min 0" Sets the min value of tx queue interval
+ pgset "queue_map_max 7" Sets the max value of tx queue interval, for multiqueue devices
+                         To select queue 1 of a given device,
+                         use queue_map_min=1 and queue_map_max=1
+
  pgset "src_mac_count 1" Sets the number of MACs we'll range through.  
                          The 'minimum' MAC is what you set with srcmac.
 
@@ -101,6 +106,9 @@ Examples:
                               IPDST_RND, UDPSRC_RND,
                               UDPDST_RND, MACSRC_RND, MACDST_RND 
                               MPLS_RND, VID_RND, SVID_RND
+                              QUEUE_MAP_RND # queue map random
+                              QUEUE_MAP_CPU # queue map mirrors smp_processor_id()
+
 
  pgset "udp_src_min 9"   set UDP source port min, If < udp_src_max, then
                          cycle through the port range.

Documentation/networking/timestamping/timestamping.c

@@ -381,7 +381,7 @@ int main(int argc, char **argv)
 	memset(&hwtstamp, 0, sizeof(hwtstamp));
 	strncpy(hwtstamp.ifr_name, interface, sizeof(hwtstamp.ifr_name));
 	hwtstamp.ifr_data = (void *)&hwconfig;
-	memset(&hwconfig, 0, sizeof(&hwconfig));
+	memset(&hwconfig, 0, sizeof(hwconfig));
 	hwconfig.tx_type =
 		(so_timestamping_flags & SOF_TIMESTAMPING_TX_HARDWARE) ?
 		HWTSTAMP_TX_ON : HWTSTAMP_TX_OFF;

Documentation/scsi/hptiop.txt

@@ -3,6 +3,25 @@ HIGHPOINT ROCKETRAID 3xxx/4xxx ADAPTER DRIVER (hptiop)
 Controller Register Map
 -------------------------
 
+For RR44xx Intel IOP based adapters, the controller IOP is accessed via PCI BAR0 and BAR2:
+
+     BAR0 offset    Register
+            0x11C5C Link Interface IRQ Set
+            0x11C60 Link Interface IRQ Clear
+
+     BAR2 offset    Register
+            0x10    Inbound Message Register 0
+            0x14    Inbound Message Register 1
+            0x18    Outbound Message Register 0
+            0x1C    Outbound Message Register 1
+            0x20    Inbound Doorbell Register
+            0x24    Inbound Interrupt Status Register
+            0x28    Inbound Interrupt Mask Register
+            0x30    Outbound Interrupt Status Register
+            0x34    Outbound Interrupt Mask Register
+            0x40    Inbound Queue Port
+            0x44    Outbound Queue Port
+
 For Intel IOP based adapters, the controller IOP is accessed via PCI BAR0:
 
      BAR0 offset    Register
@@ -93,7 +112,7 @@ The driver exposes following sysfs attributes:
 
 
 -----------------------------------------------------------------------------
-Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved.
+Copyright (C) 2006-2009 HighPoint Technologies, Inc. All Rights Reserved.
 
   This file is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -522,7 +522,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     pcm_devs       - Number of PCM devices assigned to each card
                      (default = 1, up to 4)
     pcm_substreams - Number of PCM substreams assigned to each PCM
-                     (default = 8, up to 16)
+                     (default = 8, up to 128)
     hrtimer        - Use hrtimer (=1, default) or system timer (=0)
     fake_buffer    - Fake buffer allocations (default = 1)
 

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -209,6 +209,7 @@ AD1884A / AD1883 / AD1984A / AD1984B
   laptop	laptop with HP jack sensing
   mobile	mobile devices with HP jack sensing
   thinkpad	Lenovo Thinkpad X300
+  touchsmart	HP Touchsmart
 
 AD1884
 ======
@@ -358,6 +359,7 @@ STAC9227/9228/9229/927x
   5stack-no-fp	D965 5stack without front panel
   dell-3stack	Dell Dimension E520
   dell-bios	Fixes with Dell BIOS setup
+  volknob	Fixes with volume-knob widget 0x24
   auto		BIOS setup (default)
 
 STAC92HD71B*

Documentation/trace/ftrace.txt

@@ -1231,6 +1231,7 @@ something like this simple program:
 #include <sys/stat.h>
 #include <fcntl.h>
 #include <unistd.h>
+#include <string.h>
 
 #define _STR(x) #x
 #define STR(x) _STR(x)
@@ -1265,6 +1266,7 @@ const char *find_debugfs(void)
                return NULL;
        }
 
+       strcat(debugfs, "/tracing/");
        debugfs_found = 1;
 
        return debugfs;

Documentation/vm/hwpoison.txt

@@ -0,0 +1,136 @@
+What is hwpoison?
+
+Upcoming Intel CPUs have support for recovering from some memory errors
+(``MCA recovery''). This requires the OS to declare a page "poisoned",
+kill the processes associated with it and avoid using it in the future.
+
+This patchkit implements the necessary infrastructure in the VM.
+
+To quote the overview comment:
+
+ * High level machine check handler. Handles pages reported by the
+ * hardware as being corrupted usually due to a 2bit ECC memory or cache
+ * failure.
+ *
+ * This focusses on pages detected as corrupted in the background.
+ * When the current CPU tries to consume corruption the currently
+ * running process can just be killed directly instead. This implies
+ * that if the error cannot be handled for some reason it's safe to
+ * just ignore it because no corruption has been consumed yet. Instead
+ * when that happens another machine check will happen.
+ *
+ * Handles page cache pages in various states. The tricky part
+ * here is that we can access any page asynchronous to other VM
+ * users, because memory failures could happen anytime and anywhere,
+ * possibly violating some of their assumptions. This is why this code
+ * has to be extremely careful. Generally it tries to use normal locking
+ * rules, as in get the standard locks, even if that means the
+ * error handling takes potentially a long time.
+ *
+ * Some of the operations here are somewhat inefficient and have non
+ * linear algorithmic complexity, because the data structures have not
+ * been optimized for this case. This is in particular the case
+ * for the mapping from a vma to a process. Since this case is expected
+ * to be rare we hope we can get away with this.
+
+The code consists of a the high level handler in mm/memory-failure.c,
+a new page poison bit and various checks in the VM to handle poisoned
+pages.
+
+The main target right now is KVM guests, but it works for all kinds
+of applications. KVM support requires a recent qemu-kvm release.
+
+For the KVM use there was need for a new signal type so that
+KVM can inject the machine check into the guest with the proper
+address. This in theory allows other applications to handle
+memory failures too. The expection is that near all applications
+won't do that, but some very specialized ones might.
+
+---
+
+There are two (actually three) modi memory failure recovery can be in:
+
+vm.memory_failure_recovery sysctl set to zero:
+	All memory failures cause a panic. Do not attempt recovery.
+	(on x86 this can be also affected by the tolerant level of the
+	MCE subsystem)
+
+early kill
+	(can be controlled globally and per process)
+	Send SIGBUS to the application as soon as the error is detected
+	This allows applications who can process memory errors in a gentle
+	way (e.g. drop affected object)
+	This is the mode used by KVM qemu.
+
+late kill
+	Send SIGBUS when the application runs into the corrupted page.
+	This is best for memory error unaware applications and default
+	Note some pages are always handled as late kill.
+
+---
+
+User control:
+
+vm.memory_failure_recovery
+	See sysctl.txt
+
+vm.memory_failure_early_kill
+	Enable early kill mode globally
+
+PR_MCE_KILL
+	Set early/late kill mode/revert to system default
+	arg1: PR_MCE_KILL_CLEAR: Revert to system default
+	arg1: PR_MCE_KILL_SET: arg2 defines thread specific mode
+		PR_MCE_KILL_EARLY: Early kill
+		PR_MCE_KILL_LATE:  Late kill
+		PR_MCE_KILL_DEFAULT: Use system global default
+PR_MCE_KILL_GET
+	return current mode
+
+
+---
+
+Testing:
+
+madvise(MADV_POISON, ....)
+	(as root)
+	Poison a page in the process for testing
+
+
+hwpoison-inject module through debugfs
+	/sys/debug/hwpoison/corrupt-pfn
+
+Inject hwpoison fault at PFN echoed into this file
+
+
+Architecture specific MCE injector
+
+x86 has mce-inject, mce-test
+
+Some portable hwpoison test programs in mce-test, see blow.
+
+---
+
+References:
+
+http://halobates.de/mce-lc09-2.pdf
+	Overview presentation from LinuxCon 09
+
+git://git.kernel.org/pub/scm/utils/cpu/mce/mce-test.git
+	Test suite (hwpoison specific portable tests in tsrc)
+
+git://git.kernel.org/pub/scm/utils/cpu/mce/mce-inject.git
+	x86 specific injector
+
+
+---
+
+Limitations:
+
+- Not all page types are supported and never will. Most kernel internal
+objects cannot be recovered, only LRU pages for now.
+- Right now hugepage support is missing.
+
+---
+Andi Kleen, Oct 2009
+

Documentation/vm/ksm.txt

@@ -52,15 +52,15 @@ The KSM daemon is controlled by sysfs files in /sys/kernel/mm/ksm/,
 readable by all but writable only by root:
 
 max_kernel_pages - set to maximum number of kernel pages that KSM may use
-                   e.g. "echo 2000 > /sys/kernel/mm/ksm/max_kernel_pages"
+                   e.g. "echo 100000 > /sys/kernel/mm/ksm/max_kernel_pages"
                    Value 0 imposes no limit on the kernel pages KSM may use;
                    but note that any process using MADV_MERGEABLE can cause
                    KSM to allocate these pages, unswappable until it exits.
-                   Default: 2000 (chosen for demonstration purposes)
+                   Default: quarter of memory (chosen to not pin too much)
 
 pages_to_scan    - how many present pages to scan before ksmd goes to sleep
-                   e.g. "echo 200 > /sys/kernel/mm/ksm/pages_to_scan"
-                   Default: 200 (chosen for demonstration purposes)
+                   e.g. "echo 100 > /sys/kernel/mm/ksm/pages_to_scan"
+                   Default: 100 (chosen for demonstration purposes)
 
 sleep_millisecs  - how many milliseconds ksmd should sleep before next scan
                    e.g. "echo 20 > /sys/kernel/mm/ksm/sleep_millisecs"
@@ -70,7 +70,8 @@ run              - set 0 to stop ksmd from running but keep merged pages,
                    set 1 to run ksmd e.g. "echo 1 > /sys/kernel/mm/ksm/run",
                    set 2 to stop ksmd and unmerge all pages currently merged,
                          but leave mergeable areas registered for next run
-                   Default: 1 (for immediate use by apps which register)
+                   Default: 0 (must be changed to 1 to activate KSM,
+                               except if CONFIG_SYSFS is disabled)
 
 The effectiveness of KSM and MADV_MERGEABLE is shown in /sys/kernel/mm/ksm/:
 
@@ -86,4 +87,4 @@ pages_volatile embraces several different kinds of activity, but a high
 proportion there would also indicate poor use of madvise MADV_MERGEABLE.
 
 Izik Eidus,
-Hugh Dickins, 30 July 2009
+Hugh Dickins, 24 Sept 2009

Documentation/vm/page-types.c

@@ -2,7 +2,10 @@
  * page-types: Tool for querying page flags
  *
  * Copyright (C) 2009 Intel corporation
- * Copyright (C) 2009 Wu Fengguang <fengguang.wu@intel.com>
+ *
+ * Authors: Wu Fengguang <fengguang.wu@intel.com>
+ *
+ * Released under the General Public License (GPL).
  */
 
 #define _LARGEFILE64_SOURCE
@@ -69,7 +72,9 @@
 #define KPF_COMPOUND_TAIL	16
 #define KPF_HUGE		17
 #define KPF_UNEVICTABLE		18
+#define KPF_HWPOISON		19
 #define KPF_NOPAGE		20
+#define KPF_KSM			21
 
 /* [32-] kernel hacking assistances */
 #define KPF_RESERVED		32
@@ -116,7 +121,9 @@ static char *page_flag_names[] = {
 	[KPF_COMPOUND_TAIL]	= "T:compound_tail",
 	[KPF_HUGE]		= "G:huge",
 	[KPF_UNEVICTABLE]	= "u:unevictable",
+	[KPF_HWPOISON]		= "X:hwpoison",
 	[KPF_NOPAGE]		= "n:nopage",
+	[KPF_KSM]		= "x:ksm",
 
 	[KPF_RESERVED]		= "r:reserved",
 	[KPF_MLOCKED]		= "m:mlocked",
@@ -152,9 +159,6 @@ static unsigned long	opt_size[MAX_ADDR_RANGES];
 static int		nr_vmas;
 static unsigned long	pg_start[MAX_VMAS];
 static unsigned long	pg_end[MAX_VMAS];
-static unsigned long	voffset;
-
-static int		pagemap_fd;
 
 #define MAX_BIT_FILTERS	64
 static int		nr_bit_filters;
@@ -163,9 +167,16 @@ static uint64_t		opt_bits[MAX_BIT_FILTERS];
 
 static int		page_size;
 
-#define PAGES_BATCH	(64 << 10)	/* 64k pages */
+static int		pagemap_fd;
 static int		kpageflags_fd;
 
+static int		opt_hwpoison;
+static int		opt_unpoison;
+
+static char		*hwpoison_debug_fs = "/debug/hwpoison";
+static int		hwpoison_inject_fd;
+static int		hwpoison_forget_fd;
+
 #define HASH_SHIFT	13
 #define HASH_SIZE	(1 << HASH_SHIFT)
 #define HASH_MASK	(HASH_SIZE - 1)
@@ -207,6 +218,74 @@ static void fatal(const char *x, ...)
 	exit(EXIT_FAILURE);
 }
 
+int checked_open(const char *pathname, int flags)
+{
+	int fd = open(pathname, flags);
+
+	if (fd < 0) {
+		perror(pathname);
+		exit(EXIT_FAILURE);
+	}
+
+	return fd;
+}
+
+/*
+ * pagemap/kpageflags routines
+ */
+
+static unsigned long do_u64_read(int fd, char *name,
+				 uint64_t *buf,
+				 unsigned long index,
+				 unsigned long count)
+{
+	long bytes;
+
+	if (index > ULONG_MAX / 8)
+		fatal("index overflow: %lu\n", index);
+
+	if (lseek(fd, index * 8, SEEK_SET) < 0) {
+		perror(name);
+		exit(EXIT_FAILURE);
+	}
+
+	bytes = read(fd, buf, count * 8);
+	if (bytes < 0) {
+		perror(name);
+		exit(EXIT_FAILURE);
+	}
+	if (bytes % 8)
+		fatal("partial read: %lu bytes\n", bytes);
+
+	return bytes / 8;
+}
+
+static unsigned long kpageflags_read(uint64_t *buf,
+				     unsigned long index,
+				     unsigned long pages)
+{
+	return do_u64_read(kpageflags_fd, PROC_KPAGEFLAGS, buf, index, pages);
+}
+
+static unsigned long pagemap_read(uint64_t *buf,
+				  unsigned long index,
+				  unsigned long pages)
+{
+	return do_u64_read(pagemap_fd, "/proc/pid/pagemap", buf, index, pages);
+}
+
+static unsigned long pagemap_pfn(uint64_t val)
+{
+	unsigned long pfn;
+
+	if (val & PM_PRESENT)
+		pfn = PM_PFRAME(val);
+	else
+		pfn = 0;
+
+	return pfn;
+}
+
 
 /*
  * page flag names
@@ -255,7 +334,8 @@ static char *page_flag_longname(uint64_t flags)
  * page list and summary
  */
 
-static void show_page_range(unsigned long offset, uint64_t flags)
+static void show_page_range(unsigned long voffset,
+			    unsigned long offset, uint64_t flags)
 {
 	static uint64_t      flags0;
 	static unsigned long voff;
@@ -281,7 +361,8 @@ static void show_page_range(unsigned long offset, uint64_t flags)
 	count  = 1;
 }
 
-static void show_page(unsigned long offset, uint64_t flags)
+static void show_page(unsigned long voffset,
+		      unsigned long offset, uint64_t flags)
 {
 	if (opt_pid)
 		printf("%lx\t", voffset);
@@ -362,6 +443,62 @@ static uint64_t well_known_flags(uint64_t flags)
 	return flags;
 }
 
+static uint64_t kpageflags_flags(uint64_t flags)
+{
+	flags = expand_overloaded_flags(flags);
+
+	if (!opt_raw)
+		flags = well_known_flags(flags);
+
+	return flags;
+}
+
+/*
+ * page actions
+ */
+
+static void prepare_hwpoison_fd(void)
+{
+	char buf[100];
+
+	if (opt_hwpoison && !hwpoison_inject_fd) {
+		sprintf(buf, "%s/corrupt-pfn", hwpoison_debug_fs);
+		hwpoison_inject_fd = checked_open(buf, O_WRONLY);
+	}
+
+	if (opt_unpoison && !hwpoison_forget_fd) {
+		sprintf(buf, "%s/renew-pfn", hwpoison_debug_fs);
+		hwpoison_forget_fd = checked_open(buf, O_WRONLY);
+	}
+}
+
+static int hwpoison_page(unsigned long offset)
+{
+	char buf[100];
+	int len;
+
+	len = sprintf(buf, "0x%lx\n", offset);
+	len = write(hwpoison_inject_fd, buf, len);
+	if (len < 0) {
+		perror("hwpoison inject");
+		return len;
+	}
+	return 0;
+}
+
+static int unpoison_page(unsigned long offset)
+{
+	char buf[100];
+	int len;
+
+	len = sprintf(buf, "0x%lx\n", offset);
+	len = write(hwpoison_forget_fd, buf, len);
+	if (len < 0) {
+		perror("hwpoison forget");
+		return len;
+	}
+	return 0;
+}
 
 /*
  * page frame walker
@@ -394,104 +531,83 @@ static int hash_slot(uint64_t flags)
 	exit(EXIT_FAILURE);
 }
 
-static void add_page(unsigned long offset, uint64_t flags)
+static void add_page(unsigned long voffset,
+		     unsigned long offset, uint64_t flags)
 {
-	flags = expand_overloaded_flags(flags);
-
-	if (!opt_raw)
-		flags = well_known_flags(flags);
+	flags = kpageflags_flags(flags);
 
 	if (!bit_mask_ok(flags))
 		return;
 
+	if (opt_hwpoison)
+		hwpoison_page(offset);
+	if (opt_unpoison)
+		unpoison_page(offset);
+
 	if (opt_list == 1)
-		show_page_range(offset, flags);
+		show_page_range(voffset, offset, flags);
 	else if (opt_list == 2)
-		show_page(offset, flags);
+		show_page(voffset, offset, flags);
 
 	nr_pages[hash_slot(flags)]++;
 	total_pages++;
 }
 
-static void walk_pfn(unsigned long index, unsigned long count)
+#define KPAGEFLAGS_BATCH	(64 << 10)	/* 64k pages */
+static void walk_pfn(unsigned long voffset,
+		     unsigned long index,
+		     unsigned long count)
 {
+	uint64_t buf[KPAGEFLAGS_BATCH];
 	unsigned long batch;
-	unsigned long n;
+	unsigned long pages;
 	unsigned long i;
 
-	if (index > ULONG_MAX / KPF_BYTES)
-		fatal("index overflow: %lu\n", index);
-
-	lseek(kpageflags_fd, index * KPF_BYTES, SEEK_SET);
-
 	while (count) {
-		uint64_t kpageflags_buf[KPF_BYTES * PAGES_BATCH];
-
-		batch = min_t(unsigned long, count, PAGES_BATCH);
-		n = read(kpageflags_fd, kpageflags_buf, batch * KPF_BYTES);
-		if (n == 0)
+		batch = min_t(unsigned long, count, KPAGEFLAGS_BATCH);
+		pages = kpageflags_read(buf, index, batch);
+		if (pages == 0)
 			break;
-		if (n < 0) {
-			perror(PROC_KPAGEFLAGS);
-			exit(EXIT_FAILURE);
-		}
 
-		if (n % KPF_BYTES != 0)
-			fatal("partial read: %lu bytes\n", n);
-		n = n / KPF_BYTES;
+		for (i = 0; i < pages; i++)
+			add_page(voffset + i, index + i, buf[i]);
 
-		for (i = 0; i < n; i++)
-			add_page(index + i, kpageflags_buf[i]);
-
-		index += batch;
-		count -= batch;
+		index += pages;
+		count -= pages;
 	}
 }
 
-
-#define PAGEMAP_BATCH	4096
-static unsigned long task_pfn(unsigned long pgoff)
+#define PAGEMAP_BATCH	(64 << 10)
+static void walk_vma(unsigned long index, unsigned long count)
 {
-	static uint64_t buf[PAGEMAP_BATCH];
-	static unsigned long start;
-	static long count;
-	uint64_t pfn;
+	uint64_t buf[PAGEMAP_BATCH];
+	unsigned long batch;
+	unsigned long pages;
+	unsigned long pfn;
+	unsigned long i;
 
-	if (pgoff < start || pgoff >= start + count) {
-		if (lseek64(pagemap_fd,
-			    (uint64_t)pgoff * PM_ENTRY_BYTES,
-			    SEEK_SET) < 0) {
-			perror("pagemap seek");
-			exit(EXIT_FAILURE);
+	while (count) {
+		batch = min_t(unsigned long, count, PAGEMAP_BATCH);
+		pages = pagemap_read(buf, index, batch);
+		if (pages == 0)
+			break;
+
+		for (i = 0; i < pages; i++) {
+			pfn = pagemap_pfn(buf[i]);
+			if (pfn)
+				walk_pfn(index + i, pfn, 1);
 		}
-		count = read(pagemap_fd, buf, sizeof(buf));
-		if (count == 0)
-			return 0;
-		if (count < 0) {
-			perror("pagemap read");
-			exit(EXIT_FAILURE);
-		}
-		if (count % PM_ENTRY_BYTES) {
-			fatal("pagemap read not aligned.\n");
-			exit(EXIT_FAILURE);
-		}
-		count /= PM_ENTRY_BYTES;
-		start = pgoff;
+
+		index += pages;
+		count -= pages;
 	}
-
-	pfn = buf[pgoff - start];
-	if (pfn & PM_PRESENT)
-		pfn = PM_PFRAME(pfn);
-	else
-		pfn = 0;
-
-	return pfn;
 }
 
 static void walk_task(unsigned long index, unsigned long count)
 {
-	int i = 0;
 	const unsigned long end = index + count;
+	unsigned long start;
+	int i = 0;
 
 	while (index < end) {
 
@@ -501,15 +617,11 @@ static void walk_task(unsigned long index, unsigned long count)
 		if (pg_start[i] >= end)
 			return;
 
-		voffset = max_t(unsigned long, pg_start[i], index);
-		index   = min_t(unsigned long, pg_end[i], end);
+		start = max_t(unsigned long, pg_start[i], index);
+		index = min_t(unsigned long, pg_end[i], end);
 
-		assert(voffset < index);
-		for (; voffset < index; voffset++) {
-			unsigned long pfn = task_pfn(voffset);
-			if (pfn)
-				walk_pfn(pfn, 1);
-		}
+		assert(start < index);
+		walk_vma(start, index - start);
 	}
 }
 
@@ -527,18 +639,14 @@ static void walk_addr_ranges(void)
 {
 	int i;
 
-	kpageflags_fd = open(PROC_KPAGEFLAGS, O_RDONLY);
-	if (kpageflags_fd < 0) {
-		perror(PROC_KPAGEFLAGS);
-		exit(EXIT_FAILURE);
-	}
+	kpageflags_fd = checked_open(PROC_KPAGEFLAGS, O_RDONLY);
 
 	if (!nr_addr_ranges)
 		add_addr_range(0, ULONG_MAX);
 
 	for (i = 0; i < nr_addr_ranges; i++)
 		if (!opt_pid)
-			walk_pfn(opt_offset[i], opt_size[i]);
+			walk_pfn(0, opt_offset[i], opt_size[i]);
 		else
 			walk_task(opt_offset[i], opt_size[i]);
 
@@ -575,6 +683,8 @@ static void usage(void)
 "            -l|--list                 Show page details in ranges\n"
 "            -L|--list-each            Show page details one by one\n"
 "            -N|--no-summary           Don't show summay info\n"
+"            -X|--hwpoison             hwpoison pages\n"
+"            -x|--unpoison             unpoison pages\n"
 "            -h|--help                 Show this usage message\n"
 "addr-spec:\n"
 "            N                         one page at offset N (unit: pages)\n"
@@ -624,11 +734,7 @@ static void parse_pid(const char *str)
 	opt_pid = parse_number(str);
 
 	sprintf(buf, "/proc/%d/pagemap", opt_pid);
-	pagemap_fd = open(buf, O_RDONLY);
-	if (pagemap_fd < 0) {
-		perror(buf);
-		exit(EXIT_FAILURE);
-	}
+	pagemap_fd = checked_open(buf, O_RDONLY);
 
 	sprintf(buf, "/proc/%d/maps", opt_pid);
 	file = fopen(buf, "r");
@@ -788,6 +894,8 @@ static struct option opts[] = {
 	{ "list"      , 0, NULL, 'l' },
 	{ "list-each" , 0, NULL, 'L' },
 	{ "no-summary", 0, NULL, 'N' },
+	{ "hwpoison"  , 0, NULL, 'X' },
+	{ "unpoison"  , 0, NULL, 'x' },
 	{ "help"      , 0, NULL, 'h' },
 	{ NULL        , 0, NULL, 0 }
 };
@@ -799,7 +907,7 @@ int main(int argc, char *argv[])
 	page_size = getpagesize();
 
 	while ((c = getopt_long(argc, argv,
-				"rp:f:a:b:lLNh", opts, NULL)) != -1) {
+				"rp:f:a:b:lLNXxh", opts, NULL)) != -1) {
 		switch (c) {
 		case 'r':
 			opt_raw = 1;
@@ -825,6 +933,14 @@ int main(int argc, char *argv[])
 		case 'N':
 			opt_no_summary = 1;
 			break;
+		case 'X':
+			opt_hwpoison = 1;
+			prepare_hwpoison_fd();
+			break;
+		case 'x':
+			opt_unpoison = 1;
+			prepare_hwpoison_fd();
+			break;
 		case 'h':
 			usage();
 			exit(0);
@@ -844,7 +960,7 @@ int main(int argc, char *argv[])
 	walk_addr_ranges();
 
 	if (opt_list == 1)
-		show_page_range(0, 0);  /* drain the buffer */
+		show_page_range(0, 0, 0);  /* drain the buffer */
 
 	if (opt_no_summary)
 		return 0;

Documentation/vm/pagemap.txt

@@ -57,7 +57,9 @@ There are three components to pagemap:
     16. COMPOUND_TAIL
     16. HUGE
     18. UNEVICTABLE
+    19. HWPOISON
     20. NOPAGE
+    21. KSM
 
 Short descriptions to the page flags:
 
@@ -86,9 +88,15 @@ Short descriptions to the page flags:
 17. HUGE
     this is an integral part of a HugeTLB page
 
+19. HWPOISON
+    hardware detected memory corruption on this page: don't touch the data!
+
 20. NOPAGE
     no page frame exists at the requested address
 
+21. KSM
+    identical memory pages dynamically shared between one or more processes
+
     [IO related page flags]
  1. ERROR     IO error occurred
  3. UPTODATE  page has up-to-date data

Documentation/w1/masters/ds2482

@@ -24,8 +24,8 @@ General Remarks
 
 Valid addresses are 0x18, 0x19, 0x1a, and 0x1b.
 However, the device cannot be detected without writing to the i2c bus, so no
-detection is done.
-You should force the device address.
+detection is done. You should instantiate the device explicitly.
 
-$ modprobe ds2482 force=0,0x18
+$ modprobe ds2482
+$ echo ds2482 0x18 > /sys/bus/i2c/devices/i2c-0/new_device
 

MAINTAINERS

@@ -65,43 +65,51 @@ trivial patch so apply some common sense.
 
 8.	Happy hacking.
 
-		-----------------------------------
+Descriptions of section entries:
 
-Maintainers List (try to look for most precise areas first)
+	P: Person (obsolete)
+	M: Mail patches to: FullName <address@domain>
+	L: Mailing list that is relevant to this area
+	W: Web-page with status/info
+	T: SCM tree type and location.  Type is one of: git, hg, quilt, stgit.
+	S: Status, one of the following:
+	   Supported:	Someone is actually paid to look after this.
+	   Maintained:	Someone actually looks after it.
+	   Odd Fixes:	It has a maintainer but they don't have time to do
+			much other than throw the odd patch in. See below..
+	   Orphan:	No current maintainer [but maybe you could take the
+			role as you write your new code].
+	   Obsolete:	Old code. Something tagged obsolete generally means
+			it has been replaced by a better system and you
+			should be using that.
+	F: Files and directories with wildcard patterns.
+	   A trailing slash includes all files and subdirectory files.
+	   F:	drivers/net/	all files in and below drivers/net
+	   F:	drivers/net/*	all files in drivers/net, but not below
+	   F:	*/net/*		all files in "any top level directory"/net
+	   One pattern per line.  Multiple F: lines acceptable.
+	X: Files and directories that are NOT maintained, same rules as F:
+	   Files exclusions are tested before file matches.
+	   Can be useful for excluding a specific subdirectory, for instance:
+	   F:	net/
+	   X:	net/ipv6/
+	   matches all files in and below net excluding net/ipv6/
+	K: Keyword perl extended regex pattern to match content in a
+	   patch or file.  For instance:
+	   K: of_get_profile
+	      matches patches or files that contain "of_get_profile"
+	   K: \b(printk|pr_(info|err))\b
+	      matches patches or files that contain one or more of the words
+	      printk, pr_info or pr_err
+	   One regex pattern per line.  Multiple K: lines acceptable.
 
 Note: For the hard of thinking, this list is meant to remain in alphabetical
 order. If you could add yourselves to it in alphabetical order that would be
 so much easier [Ed]
 
-P: Person (obsolete)
-M: Mail patches to: FullName <address@domain>
-L: Mailing list that is relevant to this area
-W: Web-page with status/info
-T: SCM tree type and location.  Type is one of: git, hg, quilt, stgit.
-S: Status, one of the following:
+Maintainers List (try to look for most precise areas first)
 
-	Supported:	Someone is actually paid to look after this.
-	Maintained:	Someone actually looks after it.
-	Odd Fixes:	It has a maintainer but they don't have time to do
-			much other than throw the odd patch in. See below..
-	Orphan:		No current maintainer [but maybe you could take the
-			role as you write your new code].
-	Obsolete:	Old code. Something tagged obsolete generally means
-			it has been replaced by a better system and you
-			should be using that.
-
-F: Files and directories with wildcard patterns.
-   A trailing slash includes all files and subdirectory files.
-	F:	drivers/net/	all files in and below drivers/net
-	F:	drivers/net/*	all files in drivers/net, but not below
-	F:	*/net/*		all files in "any top level directory"/net
-   One pattern per line.  Multiple F: lines acceptable.
-X: Files and directories that are NOT maintained, same rules as F:
-   Files exclusions are tested before file matches.
-   Can be useful for excluding a specific subdirectory, for instance:
-	F:	net/
-	X:	net/ipv6/
-   matches all files in and below net excluding net/ipv6/
+		-----------------------------------
 
 3C505 NETWORK DRIVER
 M:	Philip Blundell <philb@gnu.org>
@@ -257,6 +265,13 @@ W:	http://www.lesswatts.org/projects/acpi/
 S:	Supported
 F:	drivers/acpi/fan.c
 
+ACPI PROCESSOR AGGREGATOR DRIVER
+M:	Shaohua Li <shaohua.li@intel.com>
+L:	linux-acpi@vger.kernel.org
+W:	http://www.lesswatts.org/projects/acpi/
+S:	Supported
+F:	drivers/acpi/acpi_pad.c
+
 ACPI THERMAL DRIVER
 M:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
@@ -570,6 +585,11 @@ M:	Mike Rapoport <mike@compulab.co.il>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 
+ARM/CONTEC MICRO9 MACHINE SUPPORT
+M:	Hubert Feurstein <hubert.feurstein@contec.at>
+S:	Maintained
+F:	arch/arm/mach-ep93xx/micro9.c
+
 ARM/CORGI MACHINE SUPPORT
 M:	Richard Purdie <rpurdie@rpsys.net>
 S:	Maintained
@@ -646,24 +666,24 @@ ARM/INTEL IOP32X ARM ARCHITECTURE
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Supported
+S:	Maintained
 
 ARM/INTEL IOP33X ARM ARCHITECTURE
 M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Supported
+S:	Maintained
 
 ARM/INTEL IOP13XX ARM ARCHITECTURE
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Supported
+S:	Maintained
 
 ARM/INTEL IQ81342EX MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Supported
+S:	Maintained
 
 ARM/INTEL IXP2000 ARM ARCHITECTURE
 M:	Lennert Buytenhek <kernel@wantstofly.org>
@@ -691,7 +711,7 @@ ARM/INTEL XSC3 (MANZANO) ARM CORE
 M:	Lennert Buytenhek <kernel@wantstofly.org>
 M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Supported
+S:	Maintained
 
 ARM/IP FABRICS DOUBLE ESPRESSO MACHINE SUPPORT
 M:	Lennert Buytenhek <kernel@wantstofly.org>
@@ -741,23 +761,36 @@ M:	Dirk Opfer <dirk@opfer-online.de>
 S:	Maintained
 
 ARM/PALMTX,PALMT5,PALMLD,PALMTE2,PALMTC SUPPORT
-P:	Marek Vasut
-M:	marek.vasut@gmail.com
+M:	Marek Vasut <marek.vasut@gmail.com>
 L:	linux-arm-kernel@lists.infradead.org
 W:	http://hackndev.com
 S:	Maintained
+F:	arch/arm/mach-pxa/include/mach/palmtx.h
+F:	arch/arm/mach-pxa/palmtx.c
+F:	arch/arm/mach-pxa/include/mach/palmt5.h
+F:	arch/arm/mach-pxa/palmt5.c
+F:	arch/arm/mach-pxa/include/mach/palmld.h
+F:	arch/arm/mach-pxa/palmld.c
+F:	arch/arm/mach-pxa/include/mach/palmte2.h
+F:	arch/arm/mach-pxa/palmte2.c
+F:	arch/arm/mach-pxa/include/mach/palmtc.h
+F:	arch/arm/mach-pxa/palmtc.c
 
 ARM/PALM TREO 680 SUPPORT
 M:	Tomas Cech <sleep_walker@suse.cz>
 L:	linux-arm-kernel@lists.infradead.org
 W:	http://hackndev.com
 S:	Maintained
+F:	arch/arm/mach-pxa/include/mach/treo680.h
+F:	arch/arm/mach-pxa/treo680.c
 
 ARM/PALMZ72 SUPPORT
 M:	Sergey Lapin <slapin@ossfans.org>
 L:	linux-arm-kernel@lists.infradead.org
 W:	http://hackndev.com
 S:	Maintained
+F:	arch/arm/mach-pxa/include/mach/palmz72.h
+F:	arch/arm/mach-pxa/palmz72.c
 
 ARM/PLEB SUPPORT
 M:	Peter Chubb <pleb@gelato.unsw.edu.au>
@@ -967,7 +1000,7 @@ F:	drivers/net/atlx/
 
 ATM
 M:	Chas Williams <chas@cmf.nrl.navy.mil>
-L:	linux-atm-general@lists.sourceforge.net (subscribers-only)
+L:	linux-atm-general@lists.sourceforge.net (moderated for non-subscribers)
 L:	netdev@vger.kernel.org
 W:	http://linux-atm.sourceforge.net
 S:	Maintained
@@ -1211,6 +1244,13 @@ L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/tg3.*
 
+BROCADE BFA FC SCSI DRIVER
+P:      Jing Huang
+M:      huangj@brocade.com
+L:      linux-scsi@vger.kernel.org
+S:      Supported
+F:      drivers/scsi/bfa/
+
 BSG (block layer generic sg v4 driver)
 M:	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
 L:	linux-scsi@vger.kernel.org
@@ -1448,6 +1488,7 @@ F:	mm/*cgroup*
 
 CORETEMP HARDWARE MONITORING DRIVER
 M:	Rudolf Marek <r.marek@assembler.cz>
+M:	Huaxu Wan <huaxu.wan@intel.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/coretemp
@@ -2038,7 +2079,7 @@ S:	Maintained
 F:	fs/*
 
 FINTEK F75375S HARDWARE MONITOR AND FAN CONTROLLER DRIVER
-M:	Riku Voipio <riku.vipio@iki.fi>
+M:	Riku Voipio <riku.voipio@iki.fi>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	drivers/hwmon/f75375s.c
@@ -2119,7 +2160,7 @@ S:	Supported
 F:	arch/powerpc/sysdev/qe_lib/
 F:	arch/powerpc/include/asm/*qe.h
 
-FREESCALE USB PERIPHERIAL DRIVERS
+FREESCALE USB PERIPHERAL DRIVERS
 M:	Li Yang <leoli@freescale.com>
 L:	linux-usb@vger.kernel.org
 L:	linuxppc-dev@ozlabs.org
@@ -2170,18 +2211,6 @@ F:	Documentation/filesystems/caching/
 F:	fs/fscache/
 F:	include/linux/fscache*.h
 
-TRACING
-M:	Steven Rostedt <rostedt@goodmis.org>
-M:	Frederic Weisbecker <fweisbec@gmail.com>
-M:	Ingo Molnar <mingo@redhat.com>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git tracing/core
-S:	Maintained
-F:	Documentation/trace/ftrace.txt
-F:	arch/*/*/*/ftrace.h
-F:	arch/*/kernel/ftrace.c
-F:	include/*/ftrace.h include/trace/ include/linux/trace*.h
-F:	kernel/trace/
-
 FUJITSU FR-V (FRV) PORT
 M:	David Howells <dhowells@redhat.com>
 S:	Maintained
@@ -2240,9 +2269,8 @@ S:	Maintained
 F:	include/asm-generic
 
 GENERIC UIO DRIVER FOR PCI DEVICES
-M:	Michael S. Tsirkin <mst@redhat.com>
+M:	"Michael S. Tsirkin" <mst@redhat.com>
 L:	kvm@vger.kernel.org
-L:	linux-kernel@vger.kernel.org
 S:	Supported
 F:	drivers/uio/uio_pci_generic.c
 
@@ -2583,6 +2611,7 @@ L:	linux1394-devel@lists.sourceforge.net
 W:	http://www.linux1394.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
 S:	Maintained
+F:	Documentation/debugging-via-ohci1394.txt
 F:	drivers/ieee1394/
 
 IEEE 1394 RAW I/O DRIVER
@@ -2682,7 +2711,7 @@ F:	include/linux/intel-iommu.h
 
 INTEL IOP-ADMA DMA DRIVER
 M:	Dan Williams <dan.j.williams@intel.com>
-S:	Supported
+S:	Maintained
 F:	drivers/dma/iop-adma.c
 
 INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT
@@ -2971,8 +3000,8 @@ F:	scripts/Makefile.*
 
 KERNEL JANITORS
 L:	kernel-janitors@vger.kernel.org
-W:	http://www.kerneljanitors.org/
-S:	Maintained
+W:	http://janitor.kernelnewbies.org/
+S:	Odd Fixes
 
 KERNEL NFSD, SUNRPC, AND LOCKD SERVERS
 M:	"J. Bruce Fields" <bfields@fieldses.org>
@@ -3623,10 +3652,18 @@ F:	Documentation/blockdev/nbd.txt
 F:	drivers/block/nbd.c
 F:	include/linux/nbd.h
 
+NETWORK DROP MONITOR
+M:	Neil Horman <nhorman@tuxdriver.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+W:	https://fedorahosted.org/dropwatch/
+F:	net/core/drop_monitor.c
+
 NETWORKING [GENERAL]
 M:	"David S. Miller" <davem@davemloft.net>
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net
+W:	http://patchwork.ozlabs.org/project/netdev/list/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
 S:	Maintained
 F:	net/
@@ -3744,7 +3781,7 @@ F:	drivers/video/riva/
 F:	drivers/video/nvidia/
 
 OMAP SUPPORT
-M:	"Tony Lindgren <tony@atomide.com>" <tony@atomide.com>
+M:	Tony Lindgren <tony@atomide.com>
 L:	linux-omap@vger.kernel.org
 W:	http://www.muru.com/linux/omap/
 W:	http://linux.omap.com/
@@ -3849,6 +3886,15 @@ S:	Maintained
 F:	Documentation/i2c/busses/i2c-ocores
 F:	drivers/i2c/busses/i2c-ocores.c
 
+OPEN FIRMWARE AND FLATTENED DEVICE TREE
+M:	Grant Likely <grant.likely@secretlab.ca>
+L:	devicetree-discuss@lists.ozlabs.org
+W:	http://fdt.secretlab.ca
+S:	Maintained
+F:	drivers/of
+F:	include/linux/of*.h
+K:	of_get_property
+
 OPROFILE
 M:	Robert Richter <robert.richter@amd.com>
 L:	oprofile-list@lists.sf.net
@@ -3953,6 +3999,7 @@ F:	drivers/block/paride/
 PARISC ARCHITECTURE
 M:	Kyle McMartin <kyle@mcmartin.ca>
 M:	Helge Deller <deller@gmx.de>
+M:	"James E.J. Bottomley" <jejb@parisc-linux.org>
 L:	linux-parisc@vger.kernel.org
 W:	http://www.parisc-linux.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6.git
@@ -4036,6 +4083,13 @@ M:	Peter Zijlstra <a.p.zijlstra@chello.nl>
 M:	Paul Mackerras <paulus@samba.org>
 M:	Ingo Molnar <mingo@elte.hu>
 S:	Supported
+F:	kernel/perf_event.c
+F:	include/linux/perf_event.h
+F:	arch/*/*/kernel/perf_event.c
+F:	arch/*/include/asm/perf_event.h
+F:	arch/*/lib/perf_event.c
+F:	arch/*/kernel/perf_callchain.c
+F:	tools/perf/
 
 PERSONALITY HANDLING
 M:	Christoph Hellwig <hch@infradead.org>
@@ -4276,7 +4330,7 @@ F:	drivers/video/aty/aty128fb.c
 RALINK RT2X00 WIRELESS LAN DRIVER
 P:	rt2x00 project
 L:	linux-wireless@vger.kernel.org
-L:	users@rt2x00.serialmonkey.com
+L:	users@rt2x00.serialmonkey.com (moderated for non-subscribers)
 W:	http://rt2x00.serialmonkey.com/
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git
@@ -4485,12 +4539,11 @@ F:	kernel/sched*
 F:	include/linux/sched.h
 
 SCORE ARCHITECTURE
-P:	Chen Liqin
-M:	liqin.chen@sunplusct.com
-P:	Lennox Wu
-M:	lennox.wu@gmail.com
+M:	Chen Liqin <liqin.chen@sunplusct.com>
+M:	Lennox Wu <lennox.wu@gmail.com>
 W:	http://www.sunplusct.com
 S:	Supported
+F:	arch/score/
 
 SCSI CDROM DRIVER
 M:	Jens Axboe <axboe@kernel.dk>
@@ -4563,20 +4616,20 @@ S:	Maintained
 F:	drivers/mmc/host/sdricoh_cs.c
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER
-S:     Orphan
-L:     linux-mmc@vger.kernel.org
-F:     drivers/mmc/host/sdhci.*
+S:	Orphan
+L:	linux-mmc@vger.kernel.org
+F:	drivers/mmc/host/sdhci.*
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE, OPEN FIRMWARE BINDINGS (SDHCI-OF)
 M:	Anton Vorontsov <avorontsov@ru.mvista.com>
 L:	linuxppc-dev@ozlabs.org
-L:     linux-mmc@vger.kernel.org
+L:	linux-mmc@vger.kernel.org
 S:	Maintained
-F:     drivers/mmc/host/sdhci-of.*
+F:	drivers/mmc/host/sdhci-of.*
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER
 M:	Ben Dooks <ben-linux@fluff.org>
-L:     linux-mmc@vger.kernel.org
+L:	linux-mmc@vger.kernel.org
 S:	Maintained
 F:	drivers/mmc/host/sdhci-s3c.c
 
@@ -4618,6 +4671,14 @@ F:	drivers/ata/
 F:	include/linux/ata.h
 F:	include/linux/libata.h
 
+SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER
+P:     Jayamohan Kallickal
+M:     jayamohank@serverengines.com
+L:     linux-scsi@vger.kernel.org
+W:     http://www.serverengines.com
+S:     Supported
+F:     drivers/scsi/be2iscsi/
+
 SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
 M:	Sathya Perla <sathyap@serverengines.com>
 M:	Subbu Seetharaman <subbus@serverengines.com>
@@ -4671,8 +4732,7 @@ F:	drivers/usb/gadget/lh7a40*
 F:	drivers/usb/host/ohci-lh7a40*
 
 SIMPLE FIRMWARE INTERFACE (SFI)
-P:	Len Brown
-M:	lenb@kernel.org
+M:	Len Brown <lenb@kernel.org>
 L:	sfi-devel@simplefirmware.org
 W:	http://simplefirmware.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6.git
@@ -5120,6 +5180,20 @@ L:	tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/char/tpm/
 
+TRACING
+M:	Steven Rostedt <rostedt@goodmis.org>
+M:	Frederic Weisbecker <fweisbec@gmail.com>
+M:	Ingo Molnar <mingo@redhat.com>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git tracing/core
+S:	Maintained
+F:	Documentation/trace/ftrace.txt
+F:	arch/*/*/*/ftrace.h
+F:	arch/*/kernel/ftrace.c
+F:	include/*/ftrace.h
+F:	include/linux/trace*.h
+F:	include/trace/
+F:	kernel/trace/
+
 TRIVIAL PATCHES
 M:	Jiri Kosina <trivial@kernel.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git
@@ -5608,6 +5682,13 @@ S:	Maintained
 F:	drivers/vlynq/vlynq.c
 F:	include/linux/vlynq.h
 
+VMWARE VMXNET3 ETHERNET DRIVER
+M:     Shreyas Bhatewara <sbhatewara@vmware.com>
+M:     VMware, Inc. <pv-drivers@vmware.com>
+L:     netdev@vger.kernel.org
+S:     Maintained
+F:     drivers/net/vmxnet3/
+
 VOLTAGE AND CURRENT REGULATOR FRAMEWORK
 M:	Liam Girdwood <lrg@slimlogic.co.uk>
 M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
@@ -5679,8 +5760,7 @@ S:	Maintained
 F:	drivers/scsi/wd7000.c
 
 WINBOND CIR DRIVER
-P:	David Härdeman
-M:	david@hardeman.nu
+M:	David Härdeman <david@hardeman.nu>
 S:	Maintained
 F:	drivers/input/misc/winbond-cir.c
 
@@ -5737,9 +5817,7 @@ F:	drivers/input/touchscreen/*wm97*
 F:	include/linux/wm97xx.h
 
 WOLFSON MICROELECTRONICS PMIC DRIVERS
-P:	Mark Brown
-M:	broonie@opensource.wolfsonmicro.com
-L:	linux-kernel@vger.kernel.org
+M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 T:	git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
 W:	http://opensource.wolfsonmicro.com/node/8
 S:	Supported

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 32
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc6
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
@@ -179,46 +179,9 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
 # Alternatively CROSS_COMPILE can be set in the environment.
 # Default value for CROSS_COMPILE is not to prefix executables
 # Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
-#
-# To force ARCH and CROSS_COMPILE settings include kernel.* files
-# in the kernel tree - do not patch this file.
 export KBUILD_BUILDHOST := $(SUBARCH)
-
-# Kbuild save the ARCH and CROSS_COMPILE setting in kernel.* files.
-# Restore these settings and check that user did not specify
-# conflicting values.
-
-saved_arch  := $(shell cat include/generated/kernel.arch  2> /dev/null)
-saved_cross := $(shell cat include/generated/kernel.cross 2> /dev/null)
-
-ifneq ($(CROSS_COMPILE),)
-        ifneq ($(saved_cross),)
-                ifneq ($(CROSS_COMPILE),$(saved_cross))
-                        $(error CROSS_COMPILE changed from \
-                                "$(saved_cross)" to \
-                                 to "$(CROSS_COMPILE)". \
-                                 Use "make mrproper" to fix it up)
-                endif
-        endif
-else
-    CROSS_COMPILE := $(saved_cross)
-endif
-
-ifneq ($(ARCH),)
-        ifneq ($(saved_arch),)
-                ifneq ($(saved_arch),$(ARCH))
-                        $(error ARCH changed from \
-                                "$(saved_arch)" to "$(ARCH)". \
-                                 Use "make mrproper" to fix it up)
-                endif
-        endif
-else
-        ifneq ($(saved_arch),)
-                ARCH := $(saved_arch)
-        else
-                ARCH := $(SUBARCH)
-        endif
-endif
+ARCH		?= $(SUBARCH)
+CROSS_COMPILE	?=
 
 # Architecture as present in compile.h
 UTS_MACHINE 	:= $(ARCH)
@@ -483,11 +446,6 @@ ifeq ($(config-targets),1)
 include $(srctree)/arch/$(SRCARCH)/Makefile
 export KBUILD_DEFCONFIG KBUILD_KCONFIG
 
-# save ARCH & CROSS_COMPILE settings
-$(shell mkdir -p include/generated &&                            \
-        echo $(ARCH)          > include/generated/kernel.arch && \
-        echo $(CROSS_COMPILE) > include/generated/kernel.cross)
-
 config: scripts_basic outputmakefile FORCE
 	$(Q)mkdir -p include/linux include/config
 	$(Q)$(MAKE) $(build)=scripts/kconfig $@

arch/arm/common/sa1111.c

@@ -1032,6 +1032,7 @@ unsigned int sa1111_pll_clock(struct sa1111_dev *sadev)
 
 	return __sa1111_pll_clock(sachip);
 }
+EXPORT_SYMBOL(sa1111_pll_clock);
 
 /**
  *	sa1111_select_audio_mode - select I2S or AC link mode
@@ -1059,6 +1060,7 @@ void sa1111_select_audio_mode(struct sa1111_dev *sadev, int mode)
 
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_select_audio_mode);
 
 /**
  *	sa1111_set_audio_rate - set the audio sample rate
@@ -1083,6 +1085,7 @@ int sa1111_set_audio_rate(struct sa1111_dev *sadev, int rate)
 
 	return 0;
 }
+EXPORT_SYMBOL(sa1111_set_audio_rate);
 
 /**
  *	sa1111_get_audio_rate - get the audio sample rate
@@ -1100,6 +1103,7 @@ int sa1111_get_audio_rate(struct sa1111_dev *sadev)
 
 	return __sa1111_pll_clock(sachip) / (256 * div);
 }
+EXPORT_SYMBOL(sa1111_get_audio_rate);
 
 void sa1111_set_io_dir(struct sa1111_dev *sadev,
 		       unsigned int bits, unsigned int dir,
@@ -1128,6 +1132,7 @@ void sa1111_set_io_dir(struct sa1111_dev *sadev,
 	MODIFY_BITS(gpio + SA1111_GPIO_PCSDR, (bits >> 16) & 255, sleep_dir >> 16);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_set_io_dir);
 
 void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
 {
@@ -1142,6 +1147,7 @@ void sa1111_set_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
 	MODIFY_BITS(gpio + SA1111_GPIO_PCDWR, (bits >> 16) & 255, v >> 16);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_set_io);
 
 void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned int v)
 {
@@ -1156,6 +1162,7 @@ void sa1111_set_sleep_io(struct sa1111_dev *sadev, unsigned int bits, unsigned i
 	MODIFY_BITS(gpio + SA1111_GPIO_PCSSR, (bits >> 16) & 255, v >> 16);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_set_sleep_io);
 
 /*
  * Individual device operations.
@@ -1176,6 +1183,7 @@ void sa1111_enable_device(struct sa1111_dev *sadev)
 	sa1111_writel(val | sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_enable_device);
 
 /**
  *	sa1111_disable_device - disable an on-chip SA1111 function block
@@ -1192,6 +1200,7 @@ void sa1111_disable_device(struct sa1111_dev *sadev)
 	sa1111_writel(val & ~sadev->skpcr_mask, sachip->base + SA1111_SKPCR);
 	spin_unlock_irqrestore(&sachip->lock, flags);
 }
+EXPORT_SYMBOL(sa1111_disable_device);
 
 /*
  *	SA1111 "Register Access Bus."
@@ -1259,17 +1268,20 @@ struct bus_type sa1111_bus_type = {
 	.suspend	= sa1111_bus_suspend,
 	.resume		= sa1111_bus_resume,
 };
+EXPORT_SYMBOL(sa1111_bus_type);
 
 int sa1111_driver_register(struct sa1111_driver *driver)
 {
 	driver->drv.bus = &sa1111_bus_type;
 	return driver_register(&driver->drv);
 }
+EXPORT_SYMBOL(sa1111_driver_register);
 
 void sa1111_driver_unregister(struct sa1111_driver *driver)
 {
 	driver_unregister(&driver->drv);
 }
+EXPORT_SYMBOL(sa1111_driver_unregister);
 
 static int __init sa1111_init(void)
 {
@@ -1290,16 +1302,3 @@ module_exit(sa1111_exit);
 
 MODULE_DESCRIPTION("Intel Corporation SA1111 core driver");
 MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(sa1111_select_audio_mode);
-EXPORT_SYMBOL(sa1111_set_audio_rate);
-EXPORT_SYMBOL(sa1111_get_audio_rate);
-EXPORT_SYMBOL(sa1111_set_io_dir);
-EXPORT_SYMBOL(sa1111_set_io);
-EXPORT_SYMBOL(sa1111_set_sleep_io);
-EXPORT_SYMBOL(sa1111_enable_device);
-EXPORT_SYMBOL(sa1111_disable_device);
-EXPORT_SYMBOL(sa1111_pll_clock);
-EXPORT_SYMBOL(sa1111_bus_type);
-EXPORT_SYMBOL(sa1111_driver_register);
-EXPORT_SYMBOL(sa1111_driver_unregister);

arch/arm/configs/h3600_defconfig

@@ -90,7 +90,6 @@ CONFIG_ARCH_SA1100=y
 # CONFIG_SA1100_COLLIE is not set
 # CONFIG_SA1100_H3100 is not set
 CONFIG_SA1100_H3600=y
-CONFIG_SA1100_H3XXX=y
 # CONFIG_SA1100_BADGE4 is not set
 # CONFIG_SA1100_JORNADA720 is not set
 # CONFIG_SA1100_HACKKIT is not set

arch/arm/configs/n8x0_defconfig

@@ -304,7 +304,7 @@ CONFIG_ALIGNMENT_TRAP=y
 CONFIG_ZBOOT_ROM_TEXT=0x10C08000
 CONFIG_ZBOOT_ROM_BSS=0x10200000
 # CONFIG_ZBOOT_ROM is not set
-CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS0,115200n8"
+CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS2,115200n8"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 

arch/arm/configs/omap3_beagle_defconfig

@@ -969,7 +969,6 @@ CONFIG_USB_ETH_RNDIS=y
 #
 CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_GPIO_VBUS is not set
-# CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
 # CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y

arch/arm/configs/u300_defconfig

@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Thu Jul 16 23:36:10 2009
+# Linux kernel version: 2.6.32-rc5
+# Sat Oct 17 23:32:24 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
+CONFIG_HAVE_TCM=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -44,11 +44,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -80,17 +81,15 @@ CONFIG_SHMEM=y
 # CONFIG_AIO is not set
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
@@ -133,6 +132,7 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
@@ -147,6 +147,7 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 # CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -169,11 +170,13 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 CONFIG_ARCH_U300=y
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # ST-Ericsson AB U300/U330/U335/U365 Platform
@@ -195,6 +198,7 @@ CONFIG_MACH_U300_BS335=y
 CONFIG_MACH_U300_DUAL_RAM=y
 CONFIG_U300_DEBUG=y
 # CONFIG_MACH_U300_SEMI_IS_SHARED is not set
+CONFIG_MACH_U300_SPIDUMMY=y
 
 #
 # All the settings below must match the bootloader's settings
@@ -207,7 +211,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
@@ -222,6 +226,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_ARM_VIC=y
 CONFIG_ARM_VIC_NR=2
 CONFIG_COMMON_CLKDEV=y
@@ -245,6 +250,8 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
@@ -265,6 +272,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
 # CONFIG_UACCESS_WITH_MEMCPY is not set
@@ -313,6 +321,7 @@ CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
 # CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -351,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -391,6 +401,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
@@ -402,9 +413,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -453,6 +464,7 @@ CONFIG_MTD_CFI_I2=y
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -520,6 +532,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_NETDEVICES is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -540,12 +553,16 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
@@ -597,6 +614,7 @@ CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -629,9 +647,6 @@ CONFIG_I2C_STU300=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -653,16 +668,21 @@ CONFIG_SPI_PL022=y
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
 # CONFIG_PDA_POWER is not set
 # CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
 # CONFIG_BATTERY_BQ27x00 is not set
 # CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -690,10 +710,24 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
 CONFIG_AB3100_CORE=y
+CONFIG_AB3100_OTP=y
 # CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+CONFIG_REGULATOR_AB3100=y
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
@@ -792,9 +826,10 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 #
 CONFIG_MMC_ARMMMCI=y
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -820,10 +855,10 @@ CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 #
 # iptables trigger is under Netfilter config (LED target)
 #
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_HCTOSYS is not set
 # CONFIG_RTC_DEBUG is not set
 
 #
@@ -863,6 +898,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -878,27 +914,25 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
+CONFIG_RTC_DRV_AB3100=y
 
 #
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_PL030 is not set
 # CONFIG_RTC_DRV_PL031 is not set
+CONFIG_RTC_DRV_COH901331=y
 CONFIG_DMADEVICES=y
 
 #
 # DMA Devices
 #
 # CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_LP3971 is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -913,6 +947,7 @@ CONFIG_REGULATOR=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -975,7 +1010,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
@@ -1033,6 +1067,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1066,11 +1101,13 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
@@ -1121,6 +1158,7 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y

arch/arm/include/asm/bitops.h

@@ -84,7 +84,7 @@ ____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p)
 	*p = res | mask;
 	raw_local_irq_restore(flags);
 
-	return res & mask;
+	return (res & mask) != 0;
 }
 
 static inline int
@@ -101,7 +101,7 @@ ____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p)
 	*p = res & ~mask;
 	raw_local_irq_restore(flags);
 
-	return res & mask;
+	return (res & mask) != 0;
 }
 
 static inline int
@@ -118,7 +118,7 @@ ____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p)
 	*p = res ^ mask;
 	raw_local_irq_restore(flags);
 
-	return res & mask;
+	return (res & mask) != 0;
 }
 
 #include <asm-generic/bitops/non-atomic.h>

arch/arm/include/asm/cacheflush.h

@@ -414,9 +414,14 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page
 
 static inline void __flush_icache_all(void)
 {
+#ifdef CONFIG_ARM_ERRATA_411920
+	extern void v6_icache_inval_all(void);
+	v6_icache_inval_all();
+#else
 	asm("mcr	p15, 0, %0, c7, c5, 0	@ invalidate I-cache\n"
 	    :
 	    : "r" (0));
+#endif
 }
 
 #define ARCH_HAS_FLUSH_ANON_PAGE

arch/arm/include/asm/elf.h

@@ -98,6 +98,9 @@ extern int elf_check_arch(const struct elf32_hdr *);
 extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int);
 #define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(&(ex), stk)
 
+int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs);
+#define ELF_CORE_COPY_TASK_REGS dump_task_regs
+
 #define USE_ELF_CORE_DUMP
 #define ELF_EXEC_PAGESIZE	4096
 

arch/arm/include/asm/glue.h

@@ -120,25 +120,39 @@
 #endif
 
 /*
- * Prefetch abort handler.  If the CPU has an IFAR use that, otherwise
- * use the address of the aborted instruction
+ *	Prefetch Abort Model
+ *	================
+ *
+ *	We have the following to choose from:
+ *	  legacy	- no IFSR, no IFAR
+ *	  v6		- ARMv6: IFSR, no IFAR
+ *	  v7		- ARMv7: IFSR and IFAR
  */
+
 #undef CPU_PABORT_HANDLER
 #undef MULTI_PABORT
 
-#ifdef CONFIG_CPU_PABRT_IFAR
+#ifdef CONFIG_CPU_PABRT_LEGACY
 # ifdef CPU_PABORT_HANDLER
 #  define MULTI_PABORT 1
 # else
-#  define CPU_PABORT_HANDLER(reg, insn)	mrc p15, 0, reg, cr6, cr0, 2
+#  define CPU_PABORT_HANDLER legacy_pabort
 # endif
 #endif
 
-#ifdef CONFIG_CPU_PABRT_NOIFAR
+#ifdef CONFIG_CPU_PABRT_V6
 # ifdef CPU_PABORT_HANDLER
 #  define MULTI_PABORT 1
 # else
-#  define CPU_PABORT_HANDLER(reg, insn)	mov reg, insn
+#  define CPU_PABORT_HANDLER v6_pabort
+# endif
+#endif
+
+#ifdef CONFIG_CPU_PABRT_V7
+# ifdef CPU_PABORT_HANDLER
+#  define MULTI_PABORT 1
+# else
+#  define CPU_PABORT_HANDLER v7_pabort
 # endif
 #endif
 

arch/arm/include/asm/hardware/iop3xx.h

@@ -215,6 +215,7 @@ extern int iop3xx_get_init_atu(void);
  * IOP3XX I/O and Mem space regions for PCI autoconfiguration
  */
 #define IOP3XX_PCI_LOWER_MEM_PA	0x80000000
+#define IOP3XX_PCI_MEM_WINDOW_SIZE	0x08000000
 
 #define IOP3XX_PCI_IO_WINDOW_SIZE	0x00010000
 #define IOP3XX_PCI_LOWER_IO_PA		0x90000000

arch/arm/include/asm/smp_plat.h

@@ -0,0 +1,16 @@
+/*
+ * ARM specific SMP header, this contains our implementation
+ * details.
+ */
+#ifndef __ASMARM_SMP_PLAT_H
+#define __ASMARM_SMP_PLAT_H
+
+#include <asm/cputype.h>
+
+/* all SMP configurations have the extended CPUID registers */
+static inline int tlb_ops_need_broadcast(void)
+{
+	return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
+}
+
+#endif

arch/arm/include/asm/tlbflush.h

@@ -350,7 +350,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 	if (tlb_flag(TLB_WB))
 		dsb();
 
-	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) {
+	if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) {
 		if (tlb_flag(TLB_V3_FULL))
 			asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
 		if (tlb_flag(TLB_V4_U_FULL))
@@ -360,6 +360,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 		if (tlb_flag(TLB_V4_I_FULL))
 			asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
 	}
+	put_cpu();
 
 	if (tlb_flag(TLB_V6_U_ASID))
 		asm("mcr p15, 0, %0, c8, c7, 2" : : "r" (asid) : "cc");

arch/arm/include/asm/unistd.h

@@ -456,6 +456,7 @@
  * Unimplemented (or alternatively implemented) syscalls
  */
 #define __IGNORE_fadvise64_64		1
+#define __IGNORE_migrate_pages		1
 
 #endif /* __KERNEL__ */
 #endif /* __ASM_ARM_UNISTD_H */

arch/arm/kernel/entry-armv.S

@@ -311,22 +311,16 @@ __pabt_svc:
 	tst	r3, #PSR_I_BIT
 	biceq	r9, r9, #PSR_I_BIT
 
-	@
-	@ set args, then call main handler
-	@
-	@  r0 - address of faulting instruction
-	@  r1 - pointer to registers on stack
-	@
-#ifdef MULTI_PABORT
 	mov	r0, r2			@ pass address of aborted instruction.
+#ifdef MULTI_PABORT
 	ldr	r4, .LCprocfns
 	mov	lr, pc
 	ldr	pc, [r4, #PROCESSOR_PABT_FUNC]
 #else
-	CPU_PABORT_HANDLER(r0, r2)
+	bl	CPU_PABORT_HANDLER
 #endif
 	msr	cpsr_c, r9			@ Maybe enable interrupts
-	mov	r1, sp				@ regs
+	mov	r2, sp				@ regs
 	bl	do_PrefetchAbort		@ call abort handler
 
 	@
@@ -614,33 +608,33 @@ call_fpe:
  THUMB(	add	pc, r8			)
 	nop
 
-	W(mov)	pc, lr				@ CP#0
+	movw_pc	lr				@ CP#0
 	W(b)	do_fpe				@ CP#1 (FPE)
 	W(b)	do_fpe				@ CP#2 (FPE)
-	W(mov)	pc, lr				@ CP#3
+	movw_pc	lr				@ CP#3
 #ifdef CONFIG_CRUNCH
 	b	crunch_task_enable		@ CP#4 (MaverickCrunch)
 	b	crunch_task_enable		@ CP#5 (MaverickCrunch)
 	b	crunch_task_enable		@ CP#6 (MaverickCrunch)
 #else
-	W(mov)	pc, lr				@ CP#4
-	W(mov)	pc, lr				@ CP#5
-	W(mov)	pc, lr				@ CP#6
+	movw_pc	lr				@ CP#4
+	movw_pc	lr				@ CP#5
+	movw_pc	lr				@ CP#6
 #endif
-	W(mov)	pc, lr				@ CP#7
-	W(mov)	pc, lr				@ CP#8
-	W(mov)	pc, lr				@ CP#9
+	movw_pc	lr				@ CP#7
+	movw_pc	lr				@ CP#8
+	movw_pc	lr				@ CP#9
 #ifdef CONFIG_VFP
 	W(b)	do_vfp				@ CP#10 (VFP)
 	W(b)	do_vfp				@ CP#11 (VFP)
 #else
-	W(mov)	pc, lr				@ CP#10 (VFP)
-	W(mov)	pc, lr				@ CP#11 (VFP)
+	movw_pc	lr				@ CP#10 (VFP)
+	movw_pc	lr				@ CP#11 (VFP)
 #endif
-	W(mov)	pc, lr				@ CP#12
-	W(mov)	pc, lr				@ CP#13
-	W(mov)	pc, lr				@ CP#14 (Debug)
-	W(mov)	pc, lr				@ CP#15 (Control)
+	movw_pc	lr				@ CP#12
+	movw_pc	lr				@ CP#13
+	movw_pc	lr				@ CP#14 (Debug)
+	movw_pc	lr				@ CP#15 (Control)
 
 #ifdef CONFIG_NEON
 	.align	6
@@ -701,16 +695,16 @@ ENDPROC(__und_usr_unknown)
 __pabt_usr:
 	usr_entry
 
-#ifdef MULTI_PABORT
 	mov	r0, r2			@ pass address of aborted instruction.
+#ifdef MULTI_PABORT
 	ldr	r4, .LCprocfns
 	mov	lr, pc
 	ldr	pc, [r4, #PROCESSOR_PABT_FUNC]
 #else
-	CPU_PABORT_HANDLER(r0, r2)
+	bl	CPU_PABORT_HANDLER
 #endif
 	enable_irq				@ Enable interrupts
-	mov	r1, sp				@ regs
+	mov	r2, sp				@ regs
 	bl	do_PrefetchAbort		@ call abort handler
  UNWIND(.fnend		)
 	/* fall through */

arch/arm/kernel/entry-common.S

@@ -126,7 +126,7 @@ ENTRY(__gnu_mcount_nc)
 	cmp r0, r2
 	bne gnu_trace
 	ldmia sp!, {r0-r3, ip, lr}
-	bx ip
+	mov pc, ip
 
 gnu_trace:
 	ldr r1, [sp, #20]			@ lr of instrumented routine
@@ -135,7 +135,7 @@ gnu_trace:
 	mov lr, pc
 	mov pc, r2
 	ldmia sp!, {r0-r3, ip, lr}
-	bx ip
+	mov pc, ip
 
 ENTRY(mcount)
 	stmdb sp!, {r0-r3, lr}
@@ -425,13 +425,6 @@ sys_mmap2:
 #endif
 ENDPROC(sys_mmap2)
 
-ENTRY(pabort_ifar)
-		mrc	p15, 0, r0, cr6, cr0, 2
-ENTRY(pabort_noifar)
-		mov	pc, lr
-ENDPROC(pabort_ifar)
-ENDPROC(pabort_noifar)
-
 #ifdef CONFIG_OABI_COMPAT
 
 /*

arch/arm/kernel/entry-header.S

@@ -110,6 +110,13 @@
 	mov	\rd, sp, lsr #13
 	mov	\rd, \rd, lsl #13
 	.endm
+
+	@
+	@ 32-bit wide "mov pc, reg"
+	@
+	.macro	movw_pc, reg
+	mov	pc, \reg
+	.endm
 #else	/* CONFIG_THUMB2_KERNEL */
 	.macro	svc_exit, rpsr
 	clrex					@ clear the exclusive monitor
@@ -146,6 +153,14 @@
 	lsr	\rd, \rd, #13
 	mov	\rd, \rd, lsl #13
 	.endm
+
+	@
+	@ 32-bit wide "mov pc, reg"
+	@
+	.macro	movw_pc, reg
+	mov	pc, \reg
+	nop
+	.endm
 #endif	/* !CONFIG_THUMB2_KERNEL */
 
 /*

arch/arm/kernel/head-common.S

@@ -13,6 +13,7 @@
 
 #define ATAG_CORE 0x54410001
 #define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
+#define ATAG_CORE_SIZE_EMPTY ((2*4) >> 2)
 
 	.align	2
 	.type	__switch_data, %object
@@ -251,7 +252,8 @@ __vet_atags:
 	bne	1f
 
 	ldr	r5, [r2, #0]			@ is first tag ATAG_CORE?
-	subs	r5, r5, #ATAG_CORE_SIZE
+	cmp	r5, #ATAG_CORE_SIZE
+	cmpne	r5, #ATAG_CORE_SIZE_EMPTY
 	bne	1f
 	ldr	r5, [r2, #4]
 	ldr	r6, =ATAG_CORE

arch/arm/kernel/process.c

@@ -327,6 +327,15 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start,
 	return 0;
 }
 
+/*
+ * Fill in the task's elfregs structure for a core dump.
+ */
+int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs)
+{
+	elf_core_copy_regs(elfregs, task_pt_regs(t));
+	return 1;
+}
+
 /*
  * fill in the fpe structure for a core dump...
  */

arch/arm/kernel/signal.c

@@ -1,7 +1,7 @@
 /*
  *  linux/arch/arm/kernel/signal.c
  *
- *  Copyright (C) 1995-2002 Russell King
+ *  Copyright (C) 1995-2009 Russell King
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -29,6 +29,7 @@
  */
 #define SWI_SYS_SIGRETURN	(0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE))
 #define SWI_SYS_RT_SIGRETURN	(0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE))
+#define SWI_SYS_RESTART		(0xef000000|__NR_restart_syscall|__NR_OABI_SYSCALL_BASE)
 
 /*
  * With EABI, the syscall number has to be loaded into r7.
@@ -48,6 +49,18 @@ const unsigned long sigreturn_codes[7] = {
 	MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN,
 };
 
+/*
+ * Either we support OABI only, or we have EABI with the OABI
+ * compat layer enabled.  In the later case we don't know if
+ * user space is EABI or not, and if not we must not clobber r7.
+ * Always using the OABI syscall solves that issue and works for
+ * all those cases.
+ */
+const unsigned long syscall_restart_code[2] = {
+	SWI_SYS_RESTART,	/* swi	__NR_restart_syscall */
+	0xe49df004,		/* ldr	pc, [sp], #4 */
+};
+
 /*
  * atomically swap in the new signal mask, and wait for a signal.
  */
@@ -645,32 +658,12 @@ static void do_signal(struct pt_regs *regs, int syscall)
 				regs->ARM_pc -= 4;
 #else
 				u32 __user *usp;
-				u32 swival = __NR_restart_syscall;
 
-				regs->ARM_sp -= 12;
+				regs->ARM_sp -= 4;
 				usp = (u32 __user *)regs->ARM_sp;
 
-				/*
-				 * Either we supports OABI only, or we have
-				 * EABI with the OABI compat layer enabled.
-				 * In the later case we don't know if user
-				 * space is EABI or not, and if not we must
-				 * not clobber r7.  Always using the OABI
-				 * syscall solves that issue and works for
-				 * all those cases.
-				 */
-				swival = swival - __NR_SYSCALL_BASE + __NR_OABI_SYSCALL_BASE;
-
-				put_user(regs->ARM_pc, &usp[0]);
-				/* swi __NR_restart_syscall */
-				put_user(0xef000000 | swival, &usp[1]);
-				/* ldr	pc, [sp], #12 */
-				put_user(0xe49df00c, &usp[2]);
-
-				flush_icache_range((unsigned long)usp,
-						   (unsigned long)(usp + 3));
-
-				regs->ARM_pc = regs->ARM_sp + 4;
+				put_user(regs->ARM_pc, usp);
+				regs->ARM_pc = KERN_RESTART_CODE;
 #endif
 			}
 		}

arch/arm/kernel/signal.h

@@ -1,12 +1,14 @@
 /*
  *  linux/arch/arm/kernel/signal.h
  *
- *  Copyright (C) 2005 Russell King.
+ *  Copyright (C) 2005-2009 Russell King.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
 #define KERN_SIGRETURN_CODE	(CONFIG_VECTORS_BASE + 0x00000500)
+#define KERN_RESTART_CODE	(KERN_SIGRETURN_CODE + sizeof(sigreturn_codes))
 
 extern const unsigned long sigreturn_codes[7];
+extern const unsigned long syscall_restart_code[2];

arch/arm/kernel/smp.c

@@ -36,6 +36,7 @@
 #include <asm/tlbflush.h>
 #include <asm/ptrace.h>
 #include <asm/localtimer.h>
+#include <asm/smp_plat.h>
 
 /*
  * as from 2.5, kernels no longer have an init_tasks structure
@@ -153,7 +154,7 @@ int __cpuinit __cpu_up(unsigned int cpu)
 /*
  * __cpu_disable runs on the processor to be shutdown.
  */
-int __cpuexit __cpu_disable(void)
+int __cpu_disable(void)
 {
 	unsigned int cpu = smp_processor_id();
 	struct task_struct *p;
@@ -200,7 +201,7 @@ int __cpuexit __cpu_disable(void)
  * called on the thread which is asking for a CPU to be shutdown -
  * waits until shutdown has completed, or it is timed out.
  */
-void __cpuexit __cpu_die(unsigned int cpu)
+void __cpu_die(unsigned int cpu)
 {
 	if (!platform_cpu_kill(cpu))
 		printk("CPU%u: unable to kill\n", cpu);
@@ -214,7 +215,7 @@ void __cpuexit __cpu_die(unsigned int cpu)
  * of the other hotplug-cpu capable cores, so presumably coming
  * out of idle fixes this.
  */
-void __cpuexit cpu_die(void)
+void __ref cpu_die(void)
 {
 	unsigned int cpu = smp_processor_id();
 
@@ -586,12 +587,6 @@ struct tlb_args {
 	unsigned long ta_end;
 };
 
-/* all SMP configurations have the extended CPUID registers */
-static inline int tlb_ops_need_broadcast(void)
-{
-	return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
-}
-
 static inline void ipi_flush_tlb_all(void *ignored)
 {
 	local_flush_tlb_all();

arch/arm/kernel/smp_twd.c

@@ -166,10 +166,12 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
 	clockevents_register_device(clk);
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
 /*
  * take a local timer down
  */
-void __cpuexit twd_timer_stop(void)
+void twd_timer_stop(void)
 {
 	__raw_writel(0, twd_base + TWD_TIMER_CONTROL);
 }
+#endif

arch/arm/kernel/time.c

@@ -21,6 +21,7 @@
 #include <linux/interrupt.h>
 #include <linux/time.h>
 #include <linux/init.h>
+#include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/timex.h>
 #include <linux/errno.h>

arch/arm/kernel/traps.c

@@ -1,7 +1,7 @@
 /*
  *  linux/arch/arm/kernel/traps.c
  *
- *  Copyright (C) 1995-2002 Russell King
+ *  Copyright (C) 1995-2009 Russell King
  *  Fragments that appear the same as linux/arch/i386/kernel/traps.c (C) Linus Torvalds
  *
  * This program is free software; you can redistribute it and/or modify
@@ -45,21 +45,21 @@ static int __init user_debug_setup(char *str)
 __setup("user_debug=", user_debug_setup);
 #endif
 
-static void dump_mem(const char *str, unsigned long bottom, unsigned long top);
+static void dump_mem(const char *, const char *, unsigned long, unsigned long);
 
 void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
 {
 #ifdef CONFIG_KALLSYMS
-	printk("[<%08lx>] ", where);
-	print_symbol("(%s) ", where);
-	printk("from [<%08lx>] ", from);
-	print_symbol("(%s)\n", from);
+	char sym1[KSYM_SYMBOL_LEN], sym2[KSYM_SYMBOL_LEN];
+	sprint_symbol(sym1, where);
+	sprint_symbol(sym2, from);
+	printk("[<%08lx>] (%s) from [<%08lx>] (%s)\n", where, sym1, from, sym2);
 #else
 	printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
 #endif
 
 	if (in_exception_text(where))
-		dump_mem("Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
+		dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
 }
 
 #ifndef CONFIG_ARM_UNWIND
@@ -81,9 +81,10 @@ static int verify_stack(unsigned long sp)
 /*
  * Dump out the contents of some memory nicely...
  */
-static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
+static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
+		     unsigned long top)
 {
-	unsigned long p = bottom & ~31;
+	unsigned long first;
 	mm_segment_t fs;
 	int i;
 
@@ -95,33 +96,37 @@ static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
 	fs = get_fs();
 	set_fs(KERNEL_DS);
 
-	printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top);
+	printk("%s%s(0x%08lx to 0x%08lx)\n", lvl, str, bottom, top);
 
-	for (p = bottom & ~31; p < top;) {
-		printk("%04lx: ", p & 0xffff);
+	for (first = bottom & ~31; first < top; first += 32) {
+		unsigned long p;
+		char str[sizeof(" 12345678") * 8 + 1];
 
-		for (i = 0; i < 8; i++, p += 4) {
-			unsigned int val;
+		memset(str, ' ', sizeof(str));
+		str[sizeof(str) - 1] = '\0';
 
-			if (p < bottom || p >= top)
-				printk("         ");
-			else {
-				__get_user(val, (unsigned long *)p);
-				printk("%08x ", val);
+		for (p = first, i = 0; i < 8 && p < top; i++, p += 4) {
+			if (p >= bottom && p < top) {
+				unsigned long val;
+				if (__get_user(val, (unsigned long *)p) == 0)
+					sprintf(str + i * 9, " %08lx", val);
+				else
+					sprintf(str + i * 9, " ????????");
 			}
 		}
-		printk ("\n");
+		printk("%s%04lx:%s\n", lvl, first & 0xffff, str);
 	}
 
 	set_fs(fs);
 }
 
-static void dump_instr(struct pt_regs *regs)
+static void dump_instr(const char *lvl, struct pt_regs *regs)
 {
 	unsigned long addr = instruction_pointer(regs);
 	const int thumb = thumb_mode(regs);
 	const int width = thumb ? 4 : 8;
 	mm_segment_t fs;
+	char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str;
 	int i;
 
 	/*
@@ -132,7 +137,6 @@ static void dump_instr(struct pt_regs *regs)
 	fs = get_fs();
 	set_fs(KERNEL_DS);
 
-	printk("Code: ");
 	for (i = -4; i < 1; i++) {
 		unsigned int val, bad;
 
@@ -142,13 +146,14 @@ static void dump_instr(struct pt_regs *regs)
 			bad = __get_user(val, &((u32 *)addr)[i]);
 
 		if (!bad)
-			printk(i == 0 ? "(%0*x) " : "%0*x ", width, val);
+			p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ",
+					width, val);
 		else {
-			printk("bad PC value.");
+			p += sprintf(p, "bad PC value");
 			break;
 		}
 	}
-	printk("\n");
+	printk("%sCode: %s\n", lvl, str);
 
 	set_fs(fs);
 }
@@ -224,18 +229,19 @@ static void __die(const char *str, int err, struct thread_info *thread, struct p
 	struct task_struct *tsk = thread->task;
 	static int die_counter;
 
-	printk("Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
+	printk(KERN_EMERG "Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
 	       str, err, ++die_counter);
+	sysfs_printk_last_file();
 	print_modules();
 	__show_regs(regs);
-	printk("Process %s (pid: %d, stack limit = 0x%p)\n",
-		tsk->comm, task_pid_nr(tsk), thread + 1);
+	printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n",
+		TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), thread + 1);
 
 	if (!user_mode(regs) || in_interrupt()) {
-		dump_mem("Stack: ", regs->ARM_sp,
+		dump_mem(KERN_EMERG, "Stack: ", regs->ARM_sp,
 			 THREAD_SIZE + (unsigned long)task_stack_page(tsk));
 		dump_backtrace(regs, tsk);
-		dump_instr(regs);
+		dump_instr(KERN_EMERG, regs);
 	}
 }
 
@@ -250,13 +256,14 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
 
 	oops_enter();
 
-	console_verbose();
 	spin_lock_irq(&die_lock);
+	console_verbose();
 	bust_spinlocks(1);
 	__die(str, err, thread, regs);
 	bust_spinlocks(0);
 	add_taint(TAINT_DIE);
 	spin_unlock_irq(&die_lock);
+	oops_exit();
 
 	if (in_interrupt())
 		panic("Fatal exception in interrupt");
@@ -264,7 +271,6 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
 	if (panic_on_oops)
 		panic("Fatal exception");
 
-	oops_exit();
 	do_exit(SIGSEGV);
 }
 
@@ -349,7 +355,7 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 	if (user_debug & UDBG_UNDEFINED) {
 		printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n",
 			current->comm, task_pid_nr(current), pc);
-		dump_instr(regs);
+		dump_instr(KERN_INFO, regs);
 	}
 #endif
 
@@ -400,7 +406,7 @@ static int bad_syscall(int n, struct pt_regs *regs)
 	if (user_debug & UDBG_SYSCALL) {
 		printk(KERN_ERR "[%d] %s: obsolete system call %08x.\n",
 			task_pid_nr(current), current->comm, n);
-		dump_instr(regs);
+		dump_instr(KERN_ERR, regs);
 	}
 #endif
 
@@ -418,12 +424,14 @@ static int bad_syscall(int n, struct pt_regs *regs)
 static inline void
 do_cache_op(unsigned long start, unsigned long end, int flags)
 {
+	struct mm_struct *mm = current->active_mm;
 	struct vm_area_struct *vma;
 
 	if (end < start || flags)
 		return;
 
-	vma = find_vma(current->active_mm, start);
+	down_read(&mm->mmap_sem);
+	vma = find_vma(mm, start);
 	if (vma && vma->vm_start < end) {
 		if (start < vma->vm_start)
 			start = vma->vm_start;
@@ -432,6 +440,7 @@ do_cache_op(unsigned long start, unsigned long end, int flags)
 
 		flush_cache_user_range(vma, start, end);
 	}
+	up_read(&mm->mmap_sem);
 }
 
 /*
@@ -576,7 +585,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 	if (user_debug & UDBG_SYSCALL) {
 		printk("[%d] %s: arm syscall %d\n",
 		       task_pid_nr(current), current->comm, no);
-		dump_instr(regs);
+		dump_instr("", regs);
 		if (user_mode(regs)) {
 			__show_regs(regs);
 			c_backtrace(regs->ARM_fp, processor_mode(regs));
@@ -653,7 +662,7 @@ baddataabort(int code, unsigned long instr, struct pt_regs *regs)
 	if (user_debug & UDBG_BADABORT) {
 		printk(KERN_ERR "[%d] %s: bad data abort: code %d instr 0x%08lx\n",
 			task_pid_nr(current), current->comm, code, instr);
-		dump_instr(regs);
+		dump_instr(KERN_ERR, regs);
 		show_pte(current->mm, addr);
 	}
 #endif
@@ -742,6 +751,8 @@ void __init early_trap_init(void)
 	 */
 	memcpy((void *)KERN_SIGRETURN_CODE, sigreturn_codes,
 	       sizeof(sigreturn_codes));
+	memcpy((void *)KERN_RESTART_CODE, syscall_restart_code,
+	       sizeof(syscall_restart_code));
 
 	flush_icache_range(vectors, vectors + PAGE_SIZE);
 	modify_domain(DOMAIN_USER, DOMAIN_CLIENT);

arch/arm/kernel/unwind.c

@@ -26,6 +26,15 @@
  * http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html
  */
 
+#if !defined (__ARM_EABI__)
+#warning Your compiler does not have EABI support.
+#warning    ARM unwind is known to compile only with EABI compilers.
+#warning    Change compiler or disable ARM_UNWIND option.
+#elif (__GNUC__ == 4 && __GNUC_MINOR__ <= 2)
+#warning Your compiler is too buggy; it is known to not compile ARM unwind support.
+#warning    Change compiler or disable ARM_UNWIND option.
+#endif
+
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>

arch/arm/mach-at91/at91sam9g45_devices.c

@@ -838,7 +838,7 @@ static void __init at91_add_device_rtt(void)
  *  Watchdog
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
 static struct platform_device at91sam9g45_wdt_device = {
 	.name		= "at91_wdt",
 	.id		= -1,

arch/arm/mach-at91/include/mach/cpu.h

@@ -25,6 +25,8 @@
 #define ARCH_ID_AT91SAM9G20	0x019905a0
 #define ARCH_ID_AT91SAM9RL64	0x019b03a0
 #define ARCH_ID_AT91SAM9G45	0x819b05a0
+#define ARCH_ID_AT91SAM9G45MRL	0x819b05a2	/* aka 9G45-ES2 & non ES lots */
+#define ARCH_ID_AT91SAM9G45ES	0x819b05a1	/* 9G45-ES (Engineering Sample) */
 #define ARCH_ID_AT91CAP9	0x039A03A0
 
 #define ARCH_ID_AT91SAM9XE128	0x329973a0
@@ -41,6 +43,11 @@ static inline unsigned long at91_cpu_identify(void)
 	return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
 }
 
+static inline unsigned long at91_cpu_fully_identify(void)
+{
+	return at91_sys_read(AT91_DBGU_CIDR);
+}
+
 #define ARCH_EXID_AT91SAM9M11	0x00000001
 #define ARCH_EXID_AT91SAM9M10	0x00000002
 #define ARCH_EXID_AT91SAM9G45	0x00000004
@@ -118,8 +125,10 @@ static inline unsigned long at91cap9_rev_identify(void)
 
 #ifdef CONFIG_ARCH_AT91SAM9G45
 #define cpu_is_at91sam9g45()	(at91_cpu_identify() == ARCH_ID_AT91SAM9G45)
+#define cpu_is_at91sam9g45es()	(at91_cpu_fully_identify() == ARCH_ID_AT91SAM9G45ES)
 #else
 #define cpu_is_at91sam9g45()	(0)
+#define cpu_is_at91sam9g45es()	(0)
 #endif
 
 #ifdef CONFIG_ARCH_AT91CAP9

arch/arm/mach-bcmring/core.c

@@ -31,7 +31,6 @@
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
 
-#include <linux/amba/bus.h>
 #include <mach/csp/mm_addr.h>
 #include <mach/hardware.h>
 #include <asm/clkdev.h>
@@ -45,7 +44,6 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <asm/mach/mmc.h>
 
 #include <cfg_global.h>
 
@@ -273,12 +271,12 @@ static struct irqaction bcmring_timer_irq = {
 	.handler = bcmring_timer_interrupt,
 };
 
-static cycle_t bcmring_get_cycles_timer1(void)
+static cycle_t bcmring_get_cycles_timer1(struct clocksource *cs)
 {
 	return ~readl(TIMER1_VA_BASE + TIMER_VALUE);
 }
 
-static cycle_t bcmring_get_cycles_timer3(void)
+static cycle_t bcmring_get_cycles_timer3(struct clocksource *cs)
 {
 	return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
 }

arch/arm/mach-bcmring/include/mach/system.h

@@ -29,7 +29,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, char *cmd)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
 

arch/arm/mach-davinci/board-dm365-evm.c

@@ -35,7 +35,6 @@
 #include <mach/common.h>
 #include <mach/i2c.h>
 #include <mach/serial.h>
-#include <mach/common.h>
 #include <mach/mmc.h>
 #include <mach/nand.h>
 

arch/arm/mach-ep93xx/Kconfig

@@ -17,13 +17,31 @@ config EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	bool "0x00000000 - SDCE3/SyncBoot"
 	help
 	  Select this option if you want support for EP93xx boards with the
-	  first SDRAM bank at 0x00000000
+	  first SDRAM bank at 0x00000000.
 
 config EP93XX_SDCE0_PHYS_OFFSET
 	bool "0xc0000000 - SDCEO"
 	help
 	  Select this option if you want support for EP93xx boards with the
-	  first SDRAM bank at 0xc0000000
+	  first SDRAM bank at 0xc0000000.
+
+config EP93XX_SDCE1_PHYS_OFFSET
+	bool "0xd0000000 - SDCE1"
+	help
+	  Select this option if you want support for EP93xx boards with the
+	  first SDRAM bank at 0xd0000000.
+
+config EP93XX_SDCE2_PHYS_OFFSET
+	bool "0xe0000000 - SDCE2"
+	help
+	  Select this option if you want support for EP93xx boards with the
+	  first SDRAM bank at 0xe0000000.
+
+config EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+	bool "0xf0000000 - SDCE3/AsyncBoot"
+	help
+	  Select this option if you want support for EP93xx boards with the
+	  first SDRAM bank at 0xf0000000.
 
 endchoice
 
@@ -112,28 +130,36 @@ config MACH_MICRO9
 	bool
 
 config MACH_MICRO9H
-	bool "Support Contec Hypercontrol Micro9-H"
+	bool "Support Contec Micro9-High"
 	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	select MACH_MICRO9
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  Contec Hypercontrol Micro9-H board.
+	  Contec Micro9-High board.
 
 config MACH_MICRO9M
-	bool "Support Contec Hypercontrol Micro9-M"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	bool "Support Contec Micro9-Mid"
+	depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
 	select MACH_MICRO9
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  Contec Hypercontrol Micro9-M board.
+	  Contec Micro9-Mid board.
 
 config MACH_MICRO9L
-	bool "Support Contec Hypercontrol Micro9-L"
+	bool "Support Contec Micro9-Lite"
 	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	select MACH_MICRO9
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  Contec Hypercontrol Micro9-L board.
+	  Contec Micro9-Lite board.
+
+config MACH_MICRO9S
+	bool "Support Contec Micro9-Slim"
+	depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+	select MACH_MICRO9
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Contec Micro9-Slim board.
 
 config MACH_TS72XX
 	bool "Support Technologic Systems TS-72xx SBC"

arch/arm/mach-ep93xx/Makefile.boot

@@ -3,3 +3,12 @@ params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)	:= 0x00000100
 
    zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)		:= 0xc0008000
 params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)		:= 0xc0000100
+
+   zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)		:= 0xd0008000
+params_phys-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)		:= 0xd0000100
+
+   zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)		:= 0xe0008000
+params_phys-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)		:= 0xe0000100
+
+   zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)	:= 0xf0008000
+params_phys-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)	:= 0xf0000100

arch/arm/mach-ep93xx/clock.c

@@ -16,13 +16,16 @@
 #include <linux/module.h>
 #include <linux/string.h>
 #include <linux/io.h>
+#include <linux/spinlock.h>
+
+#include <mach/hardware.h>
 
 #include <asm/clkdev.h>
 #include <asm/div64.h>
-#include <mach/hardware.h>
 
 
 struct clk {
+	struct clk	*parent;
 	unsigned long	rate;
 	int		users;
 	int		sw_locked;
@@ -39,40 +42,60 @@ static unsigned long get_uart_rate(struct clk *clk);
 static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
 static int set_div_rate(struct clk *clk, unsigned long rate);
 
+
+static struct clk clk_xtali = {
+	.rate		= EP93XX_EXT_CLK_RATE,
+};
 static struct clk clk_uart1 = {
+	.parent		= &clk_xtali,
 	.sw_locked	= 1,
 	.enable_reg	= EP93XX_SYSCON_DEVCFG,
 	.enable_mask	= EP93XX_SYSCON_DEVCFG_U1EN,
 	.get_rate	= get_uart_rate,
 };
 static struct clk clk_uart2 = {
+	.parent		= &clk_xtali,
 	.sw_locked	= 1,
 	.enable_reg	= EP93XX_SYSCON_DEVCFG,
 	.enable_mask	= EP93XX_SYSCON_DEVCFG_U2EN,
 	.get_rate	= get_uart_rate,
 };
 static struct clk clk_uart3 = {
+	.parent		= &clk_xtali,
 	.sw_locked	= 1,
 	.enable_reg	= EP93XX_SYSCON_DEVCFG,
 	.enable_mask	= EP93XX_SYSCON_DEVCFG_U3EN,
 	.get_rate	= get_uart_rate,
 };
-static struct clk clk_pll1;
-static struct clk clk_f;
-static struct clk clk_h;
-static struct clk clk_p;
-static struct clk clk_pll2;
+static struct clk clk_pll1 = {
+	.parent		= &clk_xtali,
+};
+static struct clk clk_f = {
+	.parent		= &clk_pll1,
+};
+static struct clk clk_h = {
+	.parent		= &clk_pll1,
+};
+static struct clk clk_p = {
+	.parent		= &clk_pll1,
+};
+static struct clk clk_pll2 = {
+	.parent		= &clk_xtali,
+};
 static struct clk clk_usb_host = {
+	.parent		= &clk_pll2,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_USH_EN,
 };
 static struct clk clk_keypad = {
+	.parent		= &clk_xtali,
 	.sw_locked	= 1,
 	.enable_reg	= EP93XX_SYSCON_KEYTCHCLKDIV,
 	.enable_mask	= EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
 	.set_rate	= set_keytchclk_rate,
 };
 static struct clk clk_pwm = {
+	.parent		= &clk_xtali,
 	.rate		= EP93XX_EXT_CLK_RATE,
 };
 
@@ -85,50 +108,62 @@ static struct clk clk_video = {
 
 /* DMA Clocks */
 static struct clk clk_m2p0 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P0,
 };
 static struct clk clk_m2p1 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P1,
 };
 static struct clk clk_m2p2 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P2,
 };
 static struct clk clk_m2p3 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P3,
 };
 static struct clk clk_m2p4 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P4,
 };
 static struct clk clk_m2p5 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P5,
 };
 static struct clk clk_m2p6 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P6,
 };
 static struct clk clk_m2p7 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P7,
 };
 static struct clk clk_m2p8 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P8,
 };
 static struct clk clk_m2p9 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P9,
 };
 static struct clk clk_m2m0 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2M0,
 };
 static struct clk clk_m2m1 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2M1,
 };
@@ -137,6 +172,7 @@ static struct clk clk_m2m1 = {
 	{ .dev_id = dev, .con_id = con, .clk = ck }
 
 static struct clk_lookup clocks[] = {
+	INIT_CK(NULL,			"xtali",	&clk_xtali),
 	INIT_CK("apb:uart1",		NULL,		&clk_uart1),
 	INIT_CK("apb:uart2",		NULL,		&clk_uart2),
 	INIT_CK("apb:uart3",		NULL,		&clk_uart3),
@@ -163,48 +199,84 @@ static struct clk_lookup clocks[] = {
 	INIT_CK(NULL,			"m2m1",		&clk_m2m1),
 };
 
+static DEFINE_SPINLOCK(clk_lock);
+
+static void __clk_enable(struct clk *clk)
+{
+	if (!clk->users++) {
+		if (clk->parent)
+			__clk_enable(clk->parent);
+
+		if (clk->enable_reg) {
+			u32 v;
+
+			v = __raw_readl(clk->enable_reg);
+			v |= clk->enable_mask;
+			if (clk->sw_locked)
+				ep93xx_syscon_swlocked_write(v, clk->enable_reg);
+			else
+				__raw_writel(v, clk->enable_reg);
+		}
+	}
+}
 
 int clk_enable(struct clk *clk)
 {
-	if (!clk->users++ && clk->enable_reg) {
-		u32 value;
+	unsigned long flags;
 
-		value = __raw_readl(clk->enable_reg);
-		value |= clk->enable_mask;
-		if (clk->sw_locked)
-			ep93xx_syscon_swlocked_write(value, clk->enable_reg);
-		else
-			__raw_writel(value, clk->enable_reg);
-	}
+	if (!clk)
+		return -EINVAL;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	__clk_enable(clk);
+	spin_unlock_irqrestore(&clk_lock, flags);
 
 	return 0;
 }
 EXPORT_SYMBOL(clk_enable);
 
+static void __clk_disable(struct clk *clk)
+{
+	if (!--clk->users) {
+		if (clk->enable_reg) {
+			u32 v;
+
+			v = __raw_readl(clk->enable_reg);
+			v &= ~clk->enable_mask;
+			if (clk->sw_locked)
+				ep93xx_syscon_swlocked_write(v, clk->enable_reg);
+			else
+				__raw_writel(v, clk->enable_reg);
+		}
+
+		if (clk->parent)
+			__clk_disable(clk->parent);
+	}
+}
+
 void clk_disable(struct clk *clk)
 {
-	if (!--clk->users && clk->enable_reg) {
-		u32 value;
+	unsigned long flags;
 
-		value = __raw_readl(clk->enable_reg);
-		value &= ~clk->enable_mask;
-		if (clk->sw_locked)
-			ep93xx_syscon_swlocked_write(value, clk->enable_reg);
-		else
-			__raw_writel(value, clk->enable_reg);
-	}
+	if (!clk)
+		return;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	__clk_disable(clk);
+	spin_unlock_irqrestore(&clk_lock, flags);
 }
 EXPORT_SYMBOL(clk_disable);
 
 static unsigned long get_uart_rate(struct clk *clk)
 {
+	unsigned long rate = clk_get_rate(clk->parent);
 	u32 value;
 
 	value = __raw_readl(EP93XX_SYSCON_PWRCNT);
 	if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD)
-		return EP93XX_EXT_CLK_RATE;
+		return rate;
 	else
-		return EP93XX_EXT_CLK_RATE / 2;
+		return rate / 2;
 }
 
 unsigned long clk_get_rate(struct clk *clk)
@@ -244,16 +316,16 @@ static int set_keytchclk_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
-				  int *pdiv, int *div)
+static int calc_clk_div(struct clk *clk, unsigned long rate,
+			int *psel, int *esel, int *pdiv, int *div)
 {
-	unsigned long max_rate, best_rate = 0,
-		actual_rate = 0, mclk_rate = 0, rate_err = -1;
+	struct clk *mclk;
+	unsigned long max_rate, actual_rate, mclk_rate, rate_err = -1;
 	int i, found = 0, __div = 0, __pdiv = 0;
 
 	/* Don't exceed the maximum rate */
 	max_rate = max(max(clk_pll1.rate / 4, clk_pll2.rate / 4),
-		       (unsigned long)EP93XX_EXT_CLK_RATE / 4);
+		       clk_xtali.rate / 4);
 	rate = min(rate, max_rate);
 
 	/*
@@ -267,11 +339,12 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
 	 */
 	for (i = 0; i < 3; i++) {
 		if (i == 0)
-			mclk_rate = EP93XX_EXT_CLK_RATE * 2;
+			mclk = &clk_xtali;
 		else if (i == 1)
-			mclk_rate = clk_pll1.rate * 2;
-		else if (i == 2)
-			mclk_rate = clk_pll2.rate * 2;
+			mclk = &clk_pll1;
+		else
+			mclk = &clk_pll2;
+		mclk_rate = mclk->rate * 2;
 
 		/* Try each predivider value */
 		for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
@@ -286,7 +359,8 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
 				*div = __div;
 				*psel = (i == 2);
 				*esel = (i != 0);
-				best_rate = actual_rate;
+				clk->parent = mclk;
+				clk->rate = actual_rate;
 				rate_err = abs(actual_rate - rate);
 				found = 1;
 			}
@@ -294,21 +368,19 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
 	}
 
 	if (!found)
-		return 0;
+		return -EINVAL;
 
-	return best_rate;
+	return 0;
 }
 
 static int set_div_rate(struct clk *clk, unsigned long rate)
 {
-	unsigned long actual_rate;
-	int psel = 0, esel = 0, pdiv = 0, div = 0;
+	int err, psel = 0, esel = 0, pdiv = 0, div = 0;
 	u32 val;
 
-	actual_rate = calc_clk_div(rate, &psel, &esel, &pdiv, &div);
-	if (actual_rate == 0)
-		return -EINVAL;
-	clk->rate = actual_rate;
+	err = calc_clk_div(clk, rate, &psel, &esel, &pdiv, &div);
+	if (err)
+		return err;
 
 	/* Clear the esel, psel, pdiv and div bits */
 	val = __raw_readl(clk->enable_reg);
@@ -344,7 +416,7 @@ static unsigned long calc_pll_rate(u32 config_word)
 	unsigned long long rate;
 	int i;
 
-	rate = EP93XX_EXT_CLK_RATE;
+	rate = clk_xtali.rate;
 	rate *= ((config_word >> 11) & 0x1f) + 1;		/* X1FBD */
 	rate *= ((config_word >> 5) & 0x3f) + 1;		/* X2FBD */
 	do_div(rate, (config_word & 0x1f) + 1);			/* X2IPD */
@@ -377,7 +449,7 @@ static int __init ep93xx_clock_init(void)
 
 	value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
 	if (!(value & 0x00800000)) {			/* PLL1 bypassed?  */
-		clk_pll1.rate = EP93XX_EXT_CLK_RATE;
+		clk_pll1.rate = clk_xtali.rate;
 	} else {
 		clk_pll1.rate = calc_pll_rate(value);
 	}
@@ -388,7 +460,7 @@ static int __init ep93xx_clock_init(void)
 
 	value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
 	if (!(value & 0x00080000)) {			/* PLL2 bypassed?  */
-		clk_pll2.rate = EP93XX_EXT_CLK_RATE;
+		clk_pll2.rate = clk_xtali.rate;
 	} else if (value & 0x00040000) {		/* PLL2 enabled?  */
 		clk_pll2.rate = calc_pll_rate(value);
 	} else {

arch/arm/mach-ep93xx/core.c

@@ -206,7 +206,6 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
 	for (i = 0; i < 8; i++) {
 		if (status & (1 << i)) {
 			int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
-			desc = irq_desc + gpio_irq;
 			generic_handle_irq(gpio_irq);
 		}
 	}
@@ -550,13 +549,11 @@ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
 	platform_device_register(&ep93xx_eth_device);
 }
 
-static struct i2c_gpio_platform_data ep93xx_i2c_data = {
-	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
-	.sda_is_open_drain	= 0,
-	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
-	.scl_is_open_drain	= 0,
-	.udelay			= 2,
-};
+
+/*************************************************************************
+ * EP93xx i2c peripheral handling
+ *************************************************************************/
+static struct i2c_gpio_platform_data ep93xx_i2c_data;
 
 static struct platform_device ep93xx_i2c_device = {
 	.name			= "i2c-gpio",
@@ -564,8 +561,25 @@ static struct platform_device ep93xx_i2c_device = {
 	.dev.platform_data	= &ep93xx_i2c_data,
 };
 
-void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num)
+void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
+				struct i2c_board_info *devices, int num)
 {
+	/*
+	 * Set the EEPROM interface pin drive type control.
+	 * Defines the driver type for the EECLK and EEDAT pins as either
+	 * open drain, which will require an external pull-up, or a normal
+	 * CMOS driver.
+	 */
+	if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT)
+		pr_warning("ep93xx: sda != EEDAT, open drain has no effect\n");
+	if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK)
+		pr_warning("ep93xx: scl != EECLK, open drain has no effect\n");
+
+	__raw_writel((data->sda_is_open_drain << 1) |
+		     (data->scl_is_open_drain << 0),
+		     EP93XX_GPIO_EEDRIVE);
+
+	ep93xx_i2c_data = *data;
 	i2c_register_board_info(0, devices, num);
 	platform_device_register(&ep93xx_i2c_device);
 }

arch/arm/mach-ep93xx/edb93xx.c

@@ -27,8 +27,10 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/i2c.h>
 #include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
 
 #include <mach/hardware.h>
 
@@ -76,13 +78,26 @@ static struct ep93xx_eth_data edb93xx_eth_data = {
 	.phy_id		= 1,
 };
 
-static struct i2c_board_info __initdata edb93xxa_i2c_data[] = {
+
+/*************************************************************************
+ * EDB93xx i2c peripheral handling
+ *************************************************************************/
+static struct i2c_gpio_platform_data edb93xx_i2c_gpio_data = {
+	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
+	.sda_is_open_drain	= 0,
+	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
+	.scl_is_open_drain	= 0,
+	.udelay			= 0,	/* default to 100 kHz */
+	.timeout		= 0,	/* default to 100 ms */
+};
+
+static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = {
 	{
 		I2C_BOARD_INFO("isl1208", 0x6f),
 	},
 };
 
-static struct i2c_board_info __initdata edb93xx_i2c_data[] = {
+static struct i2c_board_info __initdata edb93xx_i2c_board_info[] = {
 	{
 		I2C_BOARD_INFO("ds1337", 0x68),
 	},
@@ -92,12 +107,14 @@ static void __init edb93xx_register_i2c(void)
 {
 	if (machine_is_edb9302a() || machine_is_edb9307a() ||
 	    machine_is_edb9315a()) {
-		ep93xx_register_i2c(edb93xxa_i2c_data,
-				ARRAY_SIZE(edb93xxa_i2c_data));
+		ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
+				    edb93xxa_i2c_board_info,
+				    ARRAY_SIZE(edb93xxa_i2c_board_info));
 	} else if (machine_is_edb9307() || machine_is_edb9312() ||
 		   machine_is_edb9315()) {
-		ep93xx_register_i2c(edb93xx_i2c_data,
-				ARRAY_SIZE(edb93xx_i2c_data));
+		ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
+				    edb93xx_i2c_board_info,
+				    ARRAY_SIZE(edb93xx_i2c_board_info));
 	}
 }
 

arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h

@@ -52,25 +52,27 @@
 #define EP93XX_AHB_VIRT_BASE		0xfef00000
 #define EP93XX_AHB_SIZE			0x00100000
 
+#define EP93XX_AHB_PHYS(x)		(EP93XX_AHB_PHYS_BASE + (x))
 #define EP93XX_AHB_IOMEM(x)		IOMEM(EP93XX_AHB_VIRT_BASE + (x))
 
 #define EP93XX_APB_PHYS_BASE		0x80800000
 #define EP93XX_APB_VIRT_BASE		0xfed00000
 #define EP93XX_APB_SIZE			0x00200000
 
+#define EP93XX_APB_PHYS(x)		(EP93XX_APB_PHYS_BASE + (x))
 #define EP93XX_APB_IOMEM(x)		IOMEM(EP93XX_APB_VIRT_BASE + (x))
 
 
 /* AHB peripherals */
 #define EP93XX_DMA_BASE			EP93XX_AHB_IOMEM(0x00000000)
 
-#define EP93XX_ETHERNET_PHYS_BASE	(EP93XX_AHB_PHYS_BASE + 0x00010000)
+#define EP93XX_ETHERNET_PHYS_BASE	EP93XX_AHB_PHYS(0x00010000)
 #define EP93XX_ETHERNET_BASE		EP93XX_AHB_IOMEM(0x00010000)
 
-#define EP93XX_USB_PHYS_BASE		(EP93XX_AHB_PHYS_BASE + 0x00020000)
+#define EP93XX_USB_PHYS_BASE		EP93XX_AHB_PHYS(0x00020000)
 #define EP93XX_USB_BASE			EP93XX_AHB_IOMEM(0x00020000)
 
-#define EP93XX_RASTER_PHYS_BASE		(EP93XX_AHB_PHYS_BASE + 0x00030000)
+#define EP93XX_RASTER_PHYS_BASE		EP93XX_AHB_PHYS(0x00030000)
 #define EP93XX_RASTER_BASE		EP93XX_AHB_IOMEM(0x00030000)
 
 #define EP93XX_GRAPHICS_ACCEL_BASE	EP93XX_AHB_IOMEM(0x00040000)
@@ -112,21 +114,10 @@
 
 #define EP93XX_GPIO_BASE		EP93XX_APB_IOMEM(0x00040000)
 #define EP93XX_GPIO_REG(x)		(EP93XX_GPIO_BASE + (x))
-#define EP93XX_GPIO_F_INT_TYPE1		EP93XX_GPIO_REG(0x4c)
-#define EP93XX_GPIO_F_INT_TYPE2		EP93XX_GPIO_REG(0x50)
-#define EP93XX_GPIO_F_INT_ACK		EP93XX_GPIO_REG(0x54)
-#define EP93XX_GPIO_F_INT_ENABLE	EP93XX_GPIO_REG(0x58)
 #define EP93XX_GPIO_F_INT_STATUS	EP93XX_GPIO_REG(0x5c)
-#define EP93XX_GPIO_A_INT_TYPE1		EP93XX_GPIO_REG(0x90)
-#define EP93XX_GPIO_A_INT_TYPE2		EP93XX_GPIO_REG(0x94)
-#define EP93XX_GPIO_A_INT_ACK		EP93XX_GPIO_REG(0x98)
-#define EP93XX_GPIO_A_INT_ENABLE	EP93XX_GPIO_REG(0x9c)
 #define EP93XX_GPIO_A_INT_STATUS	EP93XX_GPIO_REG(0xa0)
-#define EP93XX_GPIO_B_INT_TYPE1		EP93XX_GPIO_REG(0xac)
-#define EP93XX_GPIO_B_INT_TYPE2		EP93XX_GPIO_REG(0xb0)
-#define EP93XX_GPIO_B_INT_ACK		EP93XX_GPIO_REG(0xb4)
-#define EP93XX_GPIO_B_INT_ENABLE	EP93XX_GPIO_REG(0xb8)
 #define EP93XX_GPIO_B_INT_STATUS	EP93XX_GPIO_REG(0xbc)
+#define EP93XX_GPIO_EEDRIVE		EP93XX_GPIO_REG(0xc8)
 
 #define EP93XX_AAC_BASE			EP93XX_APB_IOMEM(0x00080000)
 
@@ -134,13 +125,13 @@
 
 #define EP93XX_IRDA_BASE		EP93XX_APB_IOMEM(0x000b0000)
 
-#define EP93XX_UART1_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000c0000)
+#define EP93XX_UART1_PHYS_BASE		EP93XX_APB_PHYS(0x000c0000)
 #define EP93XX_UART1_BASE		EP93XX_APB_IOMEM(0x000c0000)
 
-#define EP93XX_UART2_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000d0000)
+#define EP93XX_UART2_PHYS_BASE		EP93XX_APB_PHYS(0x000d0000)
 #define EP93XX_UART2_BASE		EP93XX_APB_IOMEM(0x000d0000)
 
-#define EP93XX_UART3_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000e0000)
+#define EP93XX_UART3_PHYS_BASE		EP93XX_APB_PHYS(0x000e0000)
 #define EP93XX_UART3_BASE		EP93XX_APB_IOMEM(0x000e0000)
 
 #define EP93XX_KEY_MATRIX_BASE		EP93XX_APB_IOMEM(0x000f0000)
@@ -148,10 +139,10 @@
 #define EP93XX_ADC_BASE			EP93XX_APB_IOMEM(0x00100000)
 #define EP93XX_TOUCHSCREEN_BASE		EP93XX_APB_IOMEM(0x00100000)
 
-#define EP93XX_PWM_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00110000)
+#define EP93XX_PWM_PHYS_BASE		EP93XX_APB_PHYS(0x00110000)
 #define EP93XX_PWM_BASE			EP93XX_APB_IOMEM(0x00110000)
 
-#define EP93XX_RTC_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00120000)
+#define EP93XX_RTC_PHYS_BASE		EP93XX_APB_PHYS(0x00120000)
 #define EP93XX_RTC_BASE			EP93XX_APB_IOMEM(0x00120000)
 
 #define EP93XX_SYSCON_BASE		EP93XX_APB_IOMEM(0x00130000)
@@ -218,6 +209,17 @@
 #define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV	(1<<16)
 #define EP93XX_SYSCON_KEYTCHCLKDIV_KEN	(1<<15)
 #define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV	(1<<0)
+#define EP93XX_SYSCON_SYSCFG		EP93XX_SYSCON_REG(0x9c)
+#define EP93XX_SYSCON_SYSCFG_REV_MASK	(0xf0000000)
+#define EP93XX_SYSCON_SYSCFG_REV_SHIFT	(28)
+#define EP93XX_SYSCON_SYSCFG_SBOOT	(1<<8)
+#define EP93XX_SYSCON_SYSCFG_LCSN7	(1<<7)
+#define EP93XX_SYSCON_SYSCFG_LCSN6	(1<<6)
+#define EP93XX_SYSCON_SYSCFG_LASDO	(1<<5)
+#define EP93XX_SYSCON_SYSCFG_LEEDA	(1<<4)
+#define EP93XX_SYSCON_SYSCFG_LEECLK	(1<<3)
+#define EP93XX_SYSCON_SYSCFG_LCSN2	(1<<1)
+#define EP93XX_SYSCON_SYSCFG_LCSN1	(1<<0)
 #define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
 
 #define EP93XX_WATCHDOG_BASE		EP93XX_APB_IOMEM(0x00140000)

arch/arm/mach-ep93xx/include/mach/gpio.h

@@ -114,17 +114,9 @@ extern void ep93xx_gpio_int_debounce(unsigned int irq, int enable);
  *          B0..B7  (7..15) to irq 72..79, and
  *          F0..F7 (16..24) to irq 80..87.
  */
-static inline int gpio_to_irq(unsigned gpio)
-{
-	if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ)
-		return 64 + gpio;
+#define gpio_to_irq(gpio)	\
+	(((gpio) <= EP93XX_GPIO_LINE_MAX_IRQ) ? (64 + (gpio)) : -EINVAL)
 
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return irq - gpio_to_irq(0);
-}
+#define irq_to_gpio(irq)	((irq) - gpio_to_irq(0))
 
 #endif

arch/arm/mach-ep93xx/include/mach/memory.h

@@ -9,6 +9,12 @@
 #define PHYS_OFFSET		UL(0x00000000)
 #elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)
 #define PHYS_OFFSET		UL(0xc0000000)
+#elif defined(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)
+#define PHYS_OFFSET		UL(0xd0000000)
+#elif defined(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)
+#define PHYS_OFFSET		UL(0xe0000000)
+#elif defined(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)
+#define PHYS_OFFSET		UL(0xf0000000)
 #else
 #error "Kconfig bug: No EP93xx PHYS_OFFSET set"
 #endif

arch/arm/mach-ep93xx/include/mach/platform.h

@@ -4,6 +4,7 @@
 
 #ifndef __ASSEMBLY__
 
+struct i2c_gpio_platform_data;
 struct i2c_board_info;
 struct platform_device;
 struct ep93xxfb_mach_info;
@@ -16,7 +17,6 @@ struct ep93xx_eth_data
 
 void ep93xx_map_io(void);
 void ep93xx_init_irq(void);
-void ep93xx_init_time(unsigned long);
 
 /* EP93xx System Controller software locked register write */
 void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg);
@@ -33,7 +33,8 @@ static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
 }
 
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
-void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
+void ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
+			 struct i2c_board_info *devices, int num);
 void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
 void ep93xx_register_pwm(int pwm0, int pwm1);
 int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);

arch/arm/mach-ep93xx/micro9.c

@@ -2,7 +2,9 @@
  *  linux/arch/arm/mach-ep93xx/micro9.c
  *
  * Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
- *                   Manfred Gruber <manfred.gruber@contec.at>
+ *                    Manfred Gruber <m.gruber@tirol.com>
+ * Copyright (C) 2009 Contec Steuerungstechnik & Automation GmbH
+ *                    Hubert Feurstein <hubert.feurstein@contec.at>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -20,104 +22,124 @@
 #include <asm/mach/arch.h>
 
 
-static struct ep93xx_eth_data micro9_eth_data = {
-	.phy_id		= 0x1f,
-};
+/*************************************************************************
+ * Micro9 NOR Flash
+ *
+ * Micro9-High has up to 64MB of 32-bit flash on CS1
+ * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
+ * Micro9-Lite uses a seperate MTD map driver for flash support
+ * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
+ *************************************************************************/
+static struct physmap_flash_data micro9_flash_data;
 
-static void __init micro9_init(void)
-{
-	ep93xx_register_eth(&micro9_eth_data, 1);
-}
-
-/*
- * Micro9-H
- */
-#ifdef CONFIG_MACH_MICRO9H
-static struct physmap_flash_data micro9h_flash_data = {
-	.width		= 4,
-};
-
-static struct resource micro9h_flash_resource = {
+static struct resource micro9_flash_resource = {
 	.start		= EP93XX_CS1_PHYS_BASE,
 	.end		= EP93XX_CS1_PHYS_BASE + SZ_64M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
-static struct platform_device micro9h_flash = {
+static struct platform_device micro9_flash = {
 	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
-		.platform_data	= &micro9h_flash_data,
+		.platform_data	= &micro9_flash_data,
 	},
 	.num_resources	= 1,
-	.resource	= &micro9h_flash_resource,
+	.resource	= &micro9_flash_resource,
 };
 
-static void __init micro9h_init(void)
+static void __init __micro9_register_flash(unsigned int width)
 {
-	platform_device_register(&micro9h_flash);
+	micro9_flash_data.width = width;
+
+	platform_device_register(&micro9_flash);
 }
 
-static void __init micro9h_init_machine(void)
+static unsigned int __init micro9_detect_bootwidth(void)
+{
+	u32 v;
+
+	/* Detect the bus width of the external flash memory */
+	v = __raw_readl(EP93XX_SYSCON_SYSCFG);
+	if (v & EP93XX_SYSCON_SYSCFG_LCSN7)
+		return 4; /* 32-bit */
+	else
+		return 2; /* 16-bit */
+}
+
+static void __init micro9_register_flash(void)
+{
+	if (machine_is_micro9())
+		__micro9_register_flash(4);
+	else if (machine_is_micro9m() || machine_is_micro9s())
+		__micro9_register_flash(micro9_detect_bootwidth());
+}
+
+
+/*************************************************************************
+ * Micro9 Ethernet
+ *************************************************************************/
+static struct ep93xx_eth_data micro9_eth_data = {
+	.phy_id		= 0x1f,
+};
+
+
+static void __init micro9_init_machine(void)
 {
 	ep93xx_init_devices();
-	micro9_init();
-	micro9h_init();
+	ep93xx_register_eth(&micro9_eth_data, 1);
+	micro9_register_flash();
 }
 
-MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H")
-	/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+
+#ifdef CONFIG_MACH_MICRO9H
+MACHINE_START(MICRO9, "Contec Micro9-High")
+	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
-	.init_machine	= micro9h_init_machine,
+	.init_machine	= micro9_init_machine,
 MACHINE_END
 #endif
 
-/*
- * Micro9-M
- */
 #ifdef CONFIG_MACH_MICRO9M
-static void __init micro9m_init_machine(void)
-{
-	ep93xx_init_devices();
-	micro9_init();
-}
-
-MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M")
-	/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+MACHINE_START(MICRO9M, "Contec Micro9-Mid")
+	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
-	.init_machine	= micro9m_init_machine,
+	.init_machine	= micro9_init_machine,
 MACHINE_END
 #endif
 
-/*
- * Micro9-L
- */
 #ifdef CONFIG_MACH_MICRO9L
-static void __init micro9l_init_machine(void)
-{
-	ep93xx_init_devices();
-	micro9_init();
-}
-
-MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L")
-	/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+MACHINE_START(MICRO9L, "Contec Micro9-Lite")
+	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
-	.init_machine	= micro9l_init_machine,
+	.init_machine	= micro9_init_machine,
 MACHINE_END
 #endif
 
+#ifdef CONFIG_MACH_MICRO9S
+MACHINE_START(MICRO9S, "Contec Micro9-Slim")
+	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= micro9_init_machine,
+MACHINE_END
+#endif

arch/arm/mach-integrator/include/mach/memory.h

@@ -28,5 +28,6 @@
 #define BUS_OFFSET	UL(0x80000000)
 #define __virt_to_bus(x)	((x) - PAGE_OFFSET + BUS_OFFSET)
 #define __bus_to_virt(x)	((x) - BUS_OFFSET + PAGE_OFFSET)
+#define __pfn_to_bus(x)		(((x) << PAGE_SHIFT) + BUS_OFFSET)
 
 #endif

arch/arm/mach-integrator/pci_v3.c

@@ -31,6 +31,7 @@
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
+#include <asm/signal.h>
 #include <asm/system.h>
 #include <asm/mach/pci.h>
 #include <asm/irq_regs.h>
@@ -486,7 +487,7 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys)
 	return ret;
 }
 
-struct pci_bus *pci_v3_scan_bus(int nr, struct pci_sys_data *sys)
+struct pci_bus * __init pci_v3_scan_bus(int nr, struct pci_sys_data *sys)
 {
 	return pci_scan_bus(sys->busnr, &pci_v3_ops, sys);
 }

arch/arm/mach-iop32x/include/mach/iop32x.h

@@ -31,7 +31,5 @@
 #define IOP32X_MAX_RAM_SIZE            0x40000000UL
 #define IOP3XX_MAX_RAM_SIZE            IOP32X_MAX_RAM_SIZE
 #define IOP3XX_PCI_LOWER_MEM_BA        0x80000000
-#define IOP32X_PCI_MEM_WINDOW_SIZE     0x04000000
-#define IOP3XX_PCI_MEM_WINDOW_SIZE     IOP32X_PCI_MEM_WINDOW_SIZE
 
 #endif

arch/arm/mach-iop33x/include/mach/iop33x.h

@@ -36,8 +36,6 @@
 #define IOP33X_MAX_RAM_SIZE		0x80000000UL
 #define IOP3XX_MAX_RAM_SIZE		IOP33X_MAX_RAM_SIZE
 #define IOP3XX_PCI_LOWER_MEM_BA	(PHYS_OFFSET + IOP33X_MAX_RAM_SIZE)
-#define IOP33X_PCI_MEM_WINDOW_SIZE	0x08000000
-#define IOP3XX_PCI_MEM_WINDOW_SIZE	IOP33X_PCI_MEM_WINDOW_SIZE
 
 
 #endif

arch/arm/mach-mx2/clock_imx27.c

@@ -638,9 +638,9 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
 	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
 	_REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk)
-	_REGISTER_CLOCK(NULL, "cspi1", cspi1_clk)
-	_REGISTER_CLOCK(NULL, "cspi2", cspi2_clk)
-	_REGISTER_CLOCK(NULL, "cspi3", cspi3_clk)
+	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
 	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
 	_REGISTER_CLOCK(NULL, "csi", csi_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
@@ -665,7 +665,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
 	_REGISTER_CLOCK(NULL, "ata", ata_clk)
 	_REGISTER_CLOCK(NULL, "mstick", mstick_clk)
-	_REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
 	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)

arch/arm/mach-mx2/pcm038.c

@@ -23,6 +23,10 @@
 #include <linux/mtd/plat-ram.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -35,6 +39,7 @@
 #include <mach/iomux.h>
 #include <mach/imx-uart.h>
 #include <mach/mxc_nand.h>
+#include <mach/spi.h>
 
 #include "devices.h"
 
@@ -78,8 +83,6 @@ static int pcm038_pins[] = {
 	PC6_PF_I2C2_SCL,
 	/* SPI1 */
 	PD25_PF_CSPI1_RDY,
-	PD27_PF_CSPI1_SS1,
-	PD28_PF_CSPI1_SS0,
 	PD29_PF_CSPI1_SCLK,
 	PD30_PF_CSPI1_MISO,
 	PD31_PF_CSPI1_MOSI,
@@ -196,6 +199,86 @@ static struct i2c_board_info pcm038_i2c_devices[] = {
 	}
 };
 
+static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
+
+static struct spi_imx_master pcm038_spi_0_data = {
+	.chipselect = pcm038_spi_cs,
+	.num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
+};
+
+static struct regulator_consumer_supply sdhc1_consumers[] = {
+	{
+		.dev	= &mxc_sdhc_device1.dev,
+		.supply	= "sdhc_vcc",
+	},
+};
+
+static struct regulator_init_data sdhc1_data = {
+	.constraints = {
+		.min_uV = 3000000,
+		.max_uV = 3400000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+			REGULATOR_MODE_FAST,
+		.always_on = 0,
+		.boot_on = 0,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers),
+	.consumer_supplies = sdhc1_consumers,
+};
+
+static struct regulator_consumer_supply cam_consumers[] = {
+	{
+		.dev	= NULL,
+		.supply	= "imx_cam_vcc",
+	},
+};
+
+static struct regulator_init_data cam_data = {
+	.constraints = {
+		.min_uV = 3000000,
+		.max_uV = 3400000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+			REGULATOR_MODE_FAST,
+		.always_on = 0,
+		.boot_on = 0,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(cam_consumers),
+	.consumer_supplies = cam_consumers,
+};
+
+struct mc13783_regulator_init_data pcm038_regulators[] = {
+	{
+		.id = MC13783_REGU_VCAM,
+		.init_data = &cam_data,
+	}, {
+		.id = MC13783_REGU_VMMC1,
+		.init_data = &sdhc1_data,
+	},
+};
+
+static struct mc13783_platform_data pcm038_pmic = {
+	.regulators = pcm038_regulators,
+	.num_regulators = ARRAY_SIZE(pcm038_regulators),
+	.flags = MC13783_USE_ADC | MC13783_USE_REGULATOR |
+		 MC13783_USE_TOUCHSCREEN,
+};
+
+static struct spi_board_info pcm038_spi_board_info[] __initdata = {
+	{
+		.modalias = "mc13783",
+		.irq = IRQ_GPIOB(23),
+		.max_speed_hz = 300000,
+		.bus_num = 0,
+		.chip_select = 0,
+		.platform_data = &pcm038_pmic,
+		.mode = SPI_CS_HIGH,
+	}
+};
+
 static void __init pcm038_init(void)
 {
 	mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
@@ -219,6 +302,15 @@ static void __init pcm038_init(void)
 	/* PE18 for user-LED D40 */
 	mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
 
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+
+	/* MC13783 IRQ */
+	mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
+
+	mxc_register_device(&mxc_spi_device0, &pcm038_spi_0_data);
+	spi_register_board_info(pcm038_spi_board_info,
+				ARRAY_SIZE(pcm038_spi_board_info));
+
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 #ifdef CONFIG_MACH_PCM970_BASEBOARD

arch/arm/mach-mx2/pcm970-baseboard.c

@@ -39,7 +39,6 @@ static int pcm970_pins[] = {
 	PB7_PF_SD2_D3,
 	PB8_PF_SD2_CMD,
 	PB9_PF_SD2_CLK,
-	GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */
 	/* display */
 	PA5_PF_LSCLK,
 	PA6_PF_LD0,
@@ -228,6 +227,7 @@ void __init pcm970_baseboard_init(void)
 			"PCM970");
 
 	mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
+	mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN);
 	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
 	platform_device_register(&pcm970_sja1000);
 }

arch/arm/mach-mx25/devices.c

@@ -1,4 +1,23 @@
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
 #include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 #include <linux/gpio.h>
 #include <mach/mx25.h>
 #include <mach/irqs.h>

arch/arm/mach-mx25/mx25pdk.c

@@ -1,3 +1,21 @@
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/clk.h>
@@ -23,19 +41,12 @@ static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct mxc_nand_platform_data nand_board_info = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
 static void __init mx25pdk_init(void)
 {
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 	mxc_register_device(&mxc_usbh2, NULL);
-	mxc_register_device(&mxc_nand_device, &nand_board_info);
 }
 
-
 static void __init mx25pdk_timer_init(void)
 {
 	mx25_clocks_init(26000000);

arch/arm/mach-mx3/clock-imx35.c

@@ -443,7 +443,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
 	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
-	_REGISTER_CLOCK("mxc_wdt.0", NULL, wdog_clk)
+	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "max", max_clk)
 	_REGISTER_CLOCK(NULL, "admux", admux_clk)
 	_REGISTER_CLOCK(NULL, "csi", csi_clk)

arch/arm/mach-mx3/clock.c

@@ -530,7 +530,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
 	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
 	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
-	_REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
 	_REGISTER_CLOCK(NULL, "epit", epit1_clk)
 	_REGISTER_CLOCK(NULL, "epit", epit2_clk)

arch/arm/mach-mx3/devices.c

@@ -459,7 +459,7 @@ struct platform_device mxc_usbh2 = {
  * SPI master controller
  * 3 channels
  */
-static struct resource imx_spi_0_resources[] = {
+static struct resource mxc_spi_0_resources[] = {
 	{
 	       .start = CSPI1_BASE_ADDR,
 	       .end = CSPI1_BASE_ADDR + SZ_4K - 1,
@@ -471,7 +471,7 @@ static struct resource imx_spi_0_resources[] = {
 	},
 };
 
-static struct resource imx_spi_1_resources[] = {
+static struct resource mxc_spi_1_resources[] = {
 	{
 		.start = CSPI2_BASE_ADDR,
 		.end = CSPI2_BASE_ADDR + SZ_4K - 1,
@@ -483,7 +483,7 @@ static struct resource imx_spi_1_resources[] = {
 	},
 };
 
-static struct resource imx_spi_2_resources[] = {
+static struct resource mxc_spi_2_resources[] = {
 	{
 		.start = CSPI3_BASE_ADDR,
 		.end = CSPI3_BASE_ADDR + SZ_4K - 1,
@@ -495,25 +495,25 @@ static struct resource imx_spi_2_resources[] = {
 	},
 };
 
-struct platform_device imx_spi_device0 = {
+struct platform_device mxc_spi_device0 = {
 	.name = "spi_imx",
 	.id = 0,
-	.num_resources = ARRAY_SIZE(imx_spi_0_resources),
-	.resource = imx_spi_0_resources,
+	.num_resources = ARRAY_SIZE(mxc_spi_0_resources),
+	.resource = mxc_spi_0_resources,
 };
 
-struct platform_device imx_spi_device1 = {
+struct platform_device mxc_spi_device1 = {
 	.name = "spi_imx",
 	.id = 1,
-	.num_resources = ARRAY_SIZE(imx_spi_1_resources),
-	.resource = imx_spi_1_resources,
+	.num_resources = ARRAY_SIZE(mxc_spi_1_resources),
+	.resource = mxc_spi_1_resources,
 };
 
-struct platform_device imx_spi_device2 = {
+struct platform_device mxc_spi_device2 = {
 	.name = "spi_imx",
 	.id = 2,
-	.num_resources = ARRAY_SIZE(imx_spi_2_resources),
-	.resource = imx_spi_2_resources,
+	.num_resources = ARRAY_SIZE(mxc_spi_2_resources),
+	.resource = mxc_spi_2_resources,
 };
 
 #ifdef CONFIG_ARCH_MX35

arch/arm/mach-mx3/devices.h

@@ -20,7 +20,7 @@ extern struct platform_device mxc_otg_host;
 extern struct platform_device mxc_usbh1;
 extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_rnga_device;
-extern struct platform_device imx_spi_device0;
-extern struct platform_device imx_spi_device1;
-extern struct platform_device imx_spi_device2;
+extern struct platform_device mxc_spi_device0;
+extern struct platform_device mxc_spi_device1;
+extern struct platform_device mxc_spi_device2;
 

arch/arm/mach-mx3/mm.c

@@ -81,6 +81,7 @@ void __init mx31_map_io(void)
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
+#ifdef CONFIG_ARCH_MX35
 void __init mx35_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX35);
@@ -89,6 +90,7 @@ void __init mx35_map_io(void)
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
+#endif
 
 void __init mx31_init_irq(void)
 {

arch/arm/mach-ns9xxx/clock.c

@@ -195,7 +195,7 @@ static int clk_debugfs_open(struct inode *inode, struct file *file)
 	return single_open(file, clk_debugfs_show, NULL);
 }
 
-static struct file_operations clk_debugfs_operations = {
+static const struct file_operations clk_debugfs_operations = {
 	.open = clk_debugfs_open,
 	.read = seq_read,
 	.llseek = seq_lseek,

arch/arm/mach-omap1/board-ams-delta.c

@@ -219,6 +219,10 @@ static struct platform_device *ams_delta_devices[] __initdata = {
 
 static void __init ams_delta_init(void)
 {
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+
 	iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
 
 	omap_board_config = ams_delta_config;
@@ -231,6 +235,8 @@ static void __init ams_delta_init(void)
 
 	omap_usb_init(&ams_delta_usb_config);
 	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
+
+	omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
 }
 
 static struct plat_serial8250_port ams_delta_modem_ports[] = {

arch/arm/mach-omap1/board-generic.c

@@ -64,6 +64,14 @@ static void __init omap_generic_init(void)
 {
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap15xx()) {
+		/* mux pins for uarts */
+		omap_cfg_reg(UART1_TX);
+		omap_cfg_reg(UART1_RTS);
+		omap_cfg_reg(UART2_TX);
+		omap_cfg_reg(UART2_RTS);
+		omap_cfg_reg(UART3_TX);
+		omap_cfg_reg(UART3_RX);
+
 		omap_usb_init(&generic1510_usb_config);
 	}
 #endif

arch/arm/mach-omap1/board-innovator.c

@@ -376,6 +376,26 @@ static void __init innovator_init(void)
 {
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
+		unsigned char reg;
+
+		/* mux pins for uarts */
+		omap_cfg_reg(UART1_TX);
+		omap_cfg_reg(UART1_RTS);
+		omap_cfg_reg(UART2_TX);
+		omap_cfg_reg(UART2_RTS);
+		omap_cfg_reg(UART3_TX);
+		omap_cfg_reg(UART3_RX);
+
+		reg = fpga_read(OMAP1510_FPGA_POWER);
+		reg |= OMAP1510_FPGA_PCR_COM1_EN;
+		fpga_write(reg, OMAP1510_FPGA_POWER);
+		udelay(10);
+
+		reg = fpga_read(OMAP1510_FPGA_POWER);
+		reg |= OMAP1510_FPGA_PCR_COM2_EN;
+		fpga_write(reg, OMAP1510_FPGA_POWER);
+		udelay(10);
+
 		platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
 		spi_register_board_info(innovator1510_boardinfo,
 				ARRAY_SIZE(innovator1510_boardinfo));