Linux v2.6.18. Arrr!

Ahoy, all land-lubbers, test me out right smartly!

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

.gitignore

@@ -12,6 +12,9 @@
 *.ko
 *.so
 *.mod.c
+*.i
+*.lst
+*.symtypes
 
 #
 # Top-level generic files

Documentation/SubmittingPatches

@@ -308,6 +308,8 @@ then you just add a line saying
 
 	Signed-off-by: Random J Developer <random@developer.example.org>
 
+using your real name (sorry, no pseudonyms or anonymous contributions.)
+
 Some people also put extra tags at the end.  They'll just be ignored for
 now, but you can do this to mark internal company procedures or just
 point out some special detail about the sign-off. 

Documentation/cciss.txt

@@ -20,6 +20,7 @@ This driver is known to work with the following cards:
 	* SA P400i
 	* SA E200
 	* SA E200i
+	* SA E500
 
 If nodes are not already created in the /dev/cciss directory, run as root:
 

Documentation/feature-removal-schedule.txt

@@ -120,6 +120,13 @@ Who:    Adrian Bunk <bunk@stusta.de>
 
 ---------------------------
 
+What:  drivers depending on OSS_OBSOLETE_DRIVER
+When:  options in 2.6.20, code in 2.6.22
+Why:   OSS drivers with ALSA replacements
+Who:   Adrian Bunk <bunk@stusta.de>
+
+---------------------------
+
 What:	pci_module_init(driver)
 When:	January 2007
 Why:	Is replaced by pci_register_driver(pci_driver).
@@ -274,3 +281,16 @@ Why:	The deferred output hooks are a layering violation causing unusual
 Who:	Patrick McHardy <kaber@trash.net>
 
 ---------------------------
+
+What:	frame diverter
+When:	November 2006
+Why:	The frame diverter is included in most distribution kernels, but is
+	broken. It does not correctly handle many things:
+	- IPV6
+	- non-linear skb's
+	- network device RCU on removal
+	- input frames not correctly checked for protocol errors
+	It also adds allocation overhead even if not enabled.
+	It is not clear if anyone is still using it.
+Who:	Stephen Hemminger <shemminger@osdl.org>
+

Documentation/i386/boot.txt

@@ -181,6 +181,7 @@ filled out, however:
 	5  ELILO
 	7  GRuB
 	8  U-BOOT
+	9  Xen
 
 	Please contact <hpa@zytor.com> if you need a bootloader ID
 	value assigned.

Documentation/i386/zero-page.txt

@@ -63,6 +63,10 @@ Offset	Type		Description
 				2 for bootsect-loader
 				3 for SYSLINUX
 				4 for ETHERBOOT
+				5 for ELILO
+				7 for GRuB
+				8 for U-BOOT
+				9 for Xen
 				V = version
 0x211	char		loadflags:
 			bit0 = 1: kernel is loaded high (bzImage)

Documentation/kernel-parameters.txt

@@ -697,6 +697,12 @@ running once the system is up.
 	ips=		[HW,SCSI] Adaptec / IBM ServeRAID controller
 			See header of drivers/scsi/ips.c.
 
+	ports=		[IP_VS_FTP] IPVS ftp helper module
+			Default is 21.
+			Up to 8 (IP_VS_APP_MAX_PORTS) ports
+			may be specified.
+			Format: <port>,<port>....
+
 	irqfixup	[HW]
 			When an interrupt is not handled search all handlers
 			for it. Intended to get systems with badly broken

Documentation/networking/ip-sysctl.txt

@@ -102,9 +102,15 @@ inet_peer_gc_maxtime - INTEGER
 TCP variables: 
 
 tcp_abc - INTEGER
-	Controls Appropriate Byte Count defined in RFC3465. If set to
-	0 then does congestion avoid once per ack. 1 is conservative
-	value, and 2 is more agressive.
+	Controls Appropriate Byte Count (ABC) defined in RFC3465.
+	ABC is a way of increasing congestion window (cwnd) more slowly
+	in response to partial acknowledgments.
+	Possible values are:
+		0 increase cwnd once per acknowledgment (no ABC)
+		1 increase cwnd once per acknowledgment of full sized segment
+		2 allow increase cwnd by two if acknowledgment is
+		  of two segments to compensate for delayed acknowledgments.
+	Default: 0 (off)
 
 tcp_syn_retries - INTEGER
 	Number of times initial SYNs for an active TCP connection attempt

Documentation/powerpc/booting-without-of.txt

@@ -1136,10 +1136,10 @@ Sense and level information should be encoded as follows:
    Devices connected to openPIC-compatible controllers should encode
    sense and polarity as follows:
 
-	0 = high to low edge sensitive type enabled
+	0 = low to high edge sensitive type enabled
 	1 = active low level sensitive type enabled
-	2 = low to high edge sensitive type enabled
-	3 = active high level sensitive type enabled
+	2 = active high level sensitive type enabled
+	3 = high to low edge sensitive type enabled
 
    ISA PIC interrupt controllers should adhere to the ISA PIC
    encodings listed below:

MAINTAINERS

@@ -416,7 +416,7 @@ S:	Supported
 ATM
 P:	Chas Williams
 M:	chas@cmf.nrl.navy.mil
-L:	linux-atm-general@lists.sourceforge.net
+L:	linux-atm-general@lists.sourceforge.net (subscribers-only)
 W:	http://linux-atm.sourceforge.net
 S:	Maintained
 
@@ -2810,6 +2810,14 @@ M:	hadi@cyberus.ca
 L:	netdev@vger.kernel.org
 S:	Maintained
 
+TCP LOW PRIORITY MODULE
+P:	Wong Hoi Sing, Edison
+M:	hswong3i@gmail.com
+P:	Hung Hing Lun, Mike
+M:	hlhung3i@gmail.com
+W:	http://tcp-lp-mod.sourceforge.net/
+S:	Maintained
+
 TI OMAP RANDOM NUMBER GENERATOR SUPPORT
 P:	Deepak Saxena
 M:	dsaxena@plexity.net
@@ -3296,10 +3304,11 @@ S:	Maintained
 
 XFS FILESYSTEM
 P:	Silicon Graphics Inc
+P:	Tim Shimmin, David Chatterton
 M:	xfs-masters@oss.sgi.com
-M:	nathans@sgi.com
 L:	xfs@oss.sgi.com
 W:	http://oss.sgi.com/projects/xfs
+T:	git git://oss.sgi.com:8090/xfs/xfs-2.6
 S:	Supported
 
 X86 3-LEVEL PAGING (PAE) SUPPORT

Makefile

@@ -1,8 +1,8 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 18
-EXTRAVERSION = -rc5
-NAME=Crazed Snow-Weasel
+EXTRAVERSION =
+NAME=Avast! A bilge rat!
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@@ -889,7 +889,7 @@ depend dep:
 
 # ---------------------------------------------------------------------------
 # Kernel headers
-INSTALL_HDR_PATH=$(MODLIB)/abi
+INSTALL_HDR_PATH=$(objtree)/usr
 export INSTALL_HDR_PATH
 
 PHONY += headers_install
@@ -986,7 +986,7 @@ CLEAN_FILES +=	vmlinux System.map \
                 .tmp_kallsyms* .tmp_version .tmp_vmlinux* .tmp_System.map
 
 # Directories & files removed with 'make mrproper'
-MRPROPER_DIRS  += include/config include2
+MRPROPER_DIRS  += include/config include2 usr/include
 MRPROPER_FILES += .config .config.old include/asm .version .old_version \
                   include/linux/autoconf.h include/linux/version.h      \
                   include/linux/utsrelease.h                            \
@@ -1077,11 +1077,12 @@ help:
 	@echo  '  kernelrelease	  - Output the release version string'
 	@echo  '  kernelversion	  - Output the version stored in Makefile'
 	@echo  '  headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'
-	@echo  '                    (default: /lib/modules/$$VERSION/abi)'
+	@echo  '                    (default: $(INSTALL_HDR_PATH))'
 	@echo  ''
 	@echo  'Static analysers'
 	@echo  '  checkstack      - Generate a list of stack hogs'
 	@echo  '  namespacecheck  - Name space analysis on compiled kernel'
+	@echo  '  headers_check   - Sanity check on exported headers'
 	@echo  ''
 	@echo  'Kernel packaging:'
 	@$(MAKE) $(build)=$(package-dir) help

arch/arm/Makefile

@@ -47,7 +47,8 @@ comma = ,
 # testing for a specific architecture or later rather impossible.
 arch-$(CONFIG_CPU_32v6)		:=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
 arch-$(CONFIG_CPU_32v6K)	:=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6k,-march=armv5t -Wa$(comma)-march=armv6k)
-arch-$(CONFIG_CPU_32v5)		:=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4)
+arch-$(CONFIG_CPU_32v5)		:=-D__LINUX_ARM_ARCH__=5 $(call cc-option,-march=armv5te,-march=armv4t)
+arch-$(CONFIG_CPU_32v4T)	:=-D__LINUX_ARM_ARCH__=4 -march=armv4t
 arch-$(CONFIG_CPU_32v4)		:=-D__LINUX_ARM_ARCH__=4 -march=armv4
 arch-$(CONFIG_CPU_32v3)		:=-D__LINUX_ARM_ARCH__=3 -march=armv3
 

arch/arm/common/sa1111.c

@@ -618,7 +618,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
 {
 	struct sa1111 *sachip;
 	unsigned long id;
-	unsigned int has_devs, val;
+	unsigned int has_devs;
 	int i, ret = -ENODEV;
 
 	sachip = kzalloc(sizeof(struct sa1111), GFP_KERNEL);
@@ -669,6 +669,9 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
 	sa1111_wake(sachip);
 
 #ifdef CONFIG_ARCH_SA1100
+	{
+	unsigned int val;
+
 	/*
 	 * The SDRAM configuration of the SA1110 and the SA1111 must
 	 * match.  This is very important to ensure that SA1111 accesses
@@ -692,6 +695,7 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
 	 * Enable the SA1110 memory bus request and grant signals.
 	 */
 	sa1110_mb_enable();
+	}
 #endif
 
 	/*

arch/arm/configs/csb337_defconfig

@@ -621,9 +621,8 @@ CONFIG_AT91_WATCHDOG=y
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
-CONFIG_RTC=y
-# CONFIG_AT91_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
 
@@ -956,9 +955,41 @@ CONFIG_USB_AT91=y
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_WBSD is not set
 CONFIG_MMC_AT91RM9200=y
 
+#
+# Real Time Clock
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
+
+#
+# RTC interfaces
+#
+# CONFIG_RTC_INTF_SYSFS is not set
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+
+#
+# RTC drivers
+#
+# CONFIG_RTC_DRV_X1205 is not set
+CONFIG_RTC_DRV_DS1307=y
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+CONFIG_RTC_DRV_AT91=y
+# CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
 #
 # File systems
 #

arch/arm/kernel/Makefile

@@ -13,12 +13,11 @@ obj-y		:= compat.o entry-armv.o entry-common.o irq.o \
 obj-$(CONFIG_APM)		+= apm.o
 obj-$(CONFIG_ISA_DMA_API)	+= dma.o
 obj-$(CONFIG_ARCH_ACORN)	+= ecard.o 
-obj-$(CONFIG_FOOTBRIDGE)	+= isa.o
 obj-$(CONFIG_FIQ)		+= fiq.o
 obj-$(CONFIG_MODULES)		+= armksyms.o module.o
 obj-$(CONFIG_ARTHUR)		+= arthur.o
 obj-$(CONFIG_ISA_DMA)		+= dma-isa.o
-obj-$(CONFIG_PCI)		+= bios32.o
+obj-$(CONFIG_PCI)		+= bios32.o isa.o
 obj-$(CONFIG_SMP)		+= smp.o
 obj-$(CONFIG_OABI_COMPAT)	+= sys_oabi-compat.o
 

arch/arm/kernel/isa.c

@@ -3,21 +3,14 @@
  *
  *  Copyright (C) 1999 Phil Blundell
  *
- *  ISA shared memory and I/O port support
- */
-
-/*
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
+ *
+ *  ISA shared memory and I/O port support, and is required to support
+ *  iopl, inb, outb and friends in userspace via glibc emulation.
  */
-
-/* 
- * Nothing about this is actually ARM specific.  One day we could move
- * it into kernel/resource.c or some place like that.  
- */
-
 #include <linux/stddef.h>
 #include <linux/types.h>
 #include <linux/fs.h>
@@ -27,21 +20,49 @@
 static unsigned int isa_membase, isa_portbase, isa_portshift;
 
 static ctl_table ctl_isa_vars[4] = {
-	{BUS_ISA_MEM_BASE, "membase", &isa_membase, 
-	 sizeof(isa_membase), 0444, NULL, &proc_dointvec},
-	{BUS_ISA_PORT_BASE, "portbase", &isa_portbase, 
-	 sizeof(isa_portbase), 0444, NULL, &proc_dointvec},
-	{BUS_ISA_PORT_SHIFT, "portshift", &isa_portshift, 
-	 sizeof(isa_portshift), 0444, NULL, &proc_dointvec},
-	{0}
+	{
+		.ctl_name	= BUS_ISA_MEM_BASE,
+		.procname	= "membase",
+		.data		= &isa_membase, 
+		.maxlen		= sizeof(isa_membase),
+		.mode		= 0444,
+		.proc_handler	= &proc_dointvec,
+	}, {
+		.ctl_name	= BUS_ISA_PORT_BASE,
+		.procname	= "portbase",
+		.data		= &isa_portbase, 
+		.maxlen		= sizeof(isa_portbase),
+		.mode		= 0444,
+		.proc_handler	= &proc_dointvec,
+	}, {
+		.ctl_name	= BUS_ISA_PORT_SHIFT,
+		.procname	= "portshift",
+		.data		= &isa_portshift, 
+		.maxlen		= sizeof(isa_portshift),
+		.mode		= 0444,
+		.proc_handler	= &proc_dointvec,
+	}, {0}
 };
 
 static struct ctl_table_header *isa_sysctl_header;
 
-static ctl_table ctl_isa[2] = {{CTL_BUS_ISA, "isa", NULL, 0, 0555, ctl_isa_vars},
-			       {0}};
-static ctl_table ctl_bus[2] = {{CTL_BUS, "bus", NULL, 0, 0555, ctl_isa},
-			       {0}};
+static ctl_table ctl_isa[2] = {
+	{
+		.ctl_name	= CTL_BUS_ISA,
+		.procname	= "isa",
+		.mode		= 0555,
+		.child		= ctl_isa_vars,
+	}, {0}
+};
+
+static ctl_table ctl_bus[2] = {
+	{
+		.ctl_name	= CTL_BUS,
+		.procname	= "bus",
+		.mode		= 0555,
+		.child		= ctl_isa,
+	}, {0}
+};
 
 void __init
 register_isa_ports(unsigned int membase, unsigned int portbase, unsigned int portshift)

arch/arm/mach-footbridge/dc21285.c

@@ -35,7 +35,6 @@
 
 extern int setup_arm_irq(int, struct irqaction *);
 extern void pcibios_report_status(u_int status_mask, int warn);
-extern void register_isa_ports(unsigned int, unsigned int, unsigned int);
 
 static unsigned long
 dc21285_base_address(struct pci_bus *bus, unsigned int devfn)

arch/arm/mach-integrator/pci_v3.c

@@ -600,4 +600,6 @@ void __init pci_v3_postinit(void)
 		printk(KERN_ERR "PCI: unable to grab local bus timeout "
 		       "interrupt: %d\n", ret);
 #endif
+
+	register_isa_ports(PHYS_PCI_MEM_BASE, PHYS_PCI_IO_BASE, 0);
 }

arch/arm/mach-ixp4xx/nslu2-pci.c

@@ -17,6 +17,7 @@
 
 #include <linux/pci.h>
 #include <linux/init.h>
+#include <linux/irq.h>
 
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>

arch/arm/mach-ixp4xx/nslu2-power.c

@@ -19,6 +19,7 @@
 
 #include <linux/module.h>
 #include <linux/reboot.h>
+#include <linux/irq.h>
 #include <linux/interrupt.h>
 #include <linux/reboot.h>
 

arch/arm/mach-pxa/corgi_ssp.c

@@ -47,14 +47,15 @@ static struct corgissp_machinfo *ssp_machinfo;
  */
 unsigned long corgi_ssp_ads7846_putget(ulong data)
 {
-	unsigned long ret,flag;
+	unsigned long flag;
+	u32 ret = 0;
 
 	spin_lock_irqsave(&corgi_ssp_lock, flag);
 	if (ssp_machinfo->cs_ads7846 >= 0)
 		GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
 
 	ssp_write_word(&corgi_ssp_dev,data);
-	ret = ssp_read_word(&corgi_ssp_dev);
+ 	ssp_read_word(&corgi_ssp_dev, &ret);
 
 	if (ssp_machinfo->cs_ads7846 >= 0)
 		GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
@@ -88,7 +89,9 @@ void corgi_ssp_ads7846_put(ulong data)
 
 unsigned long corgi_ssp_ads7846_get(void)
 {
-	return ssp_read_word(&corgi_ssp_dev);
+	u32 ret = 0;
+	ssp_read_word(&corgi_ssp_dev, &ret);
+	return ret;
 }
 
 EXPORT_SYMBOL(corgi_ssp_ads7846_putget);
@@ -104,6 +107,7 @@ EXPORT_SYMBOL(corgi_ssp_ads7846_get);
 unsigned long corgi_ssp_dac_put(ulong data)
 {
 	unsigned long flag, sscr1 = SSCR1_SPH;
+	u32 tmp;
 
 	spin_lock_irqsave(&corgi_ssp_lock, flag);
 
@@ -118,7 +122,7 @@ unsigned long corgi_ssp_dac_put(ulong data)
 		GPCR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
 	ssp_write_word(&corgi_ssp_dev,data);
 	/* Read null data back from device to prevent SSP overflow */
-	ssp_read_word(&corgi_ssp_dev);
+	ssp_read_word(&corgi_ssp_dev, &tmp);
 	if (ssp_machinfo->cs_lcdcon >= 0)
 		GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
 
@@ -150,7 +154,7 @@ EXPORT_SYMBOL(corgi_ssp_blduty_set);
 int corgi_ssp_max1111_get(ulong data)
 {
 	unsigned long flag;
-	int voltage,voltage1,voltage2;
+	long voltage = 0, voltage1 = 0, voltage2 = 0;
 
 	spin_lock_irqsave(&corgi_ssp_lock, flag);
 	if (ssp_machinfo->cs_max1111 >= 0)
@@ -163,15 +167,15 @@ int corgi_ssp_max1111_get(ulong data)
 
 	/* TB1/RB1 */
 	ssp_write_word(&corgi_ssp_dev,data);
-	ssp_read_word(&corgi_ssp_dev); /* null read */
+	ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1); /* null read */
 
 	/* TB12/RB2 */
 	ssp_write_word(&corgi_ssp_dev,0);
-	voltage1=ssp_read_word(&corgi_ssp_dev);
+	ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1);
 
 	/* TB13/RB3*/
 	ssp_write_word(&corgi_ssp_dev,0);
-	voltage2=ssp_read_word(&corgi_ssp_dev);
+	ssp_read_word(&corgi_ssp_dev, (u32*)&voltage2);
 
 	ssp_disable(&corgi_ssp_dev);
 	ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));

arch/arm/mach-pxa/ssp.c

@@ -40,6 +40,8 @@
 
 #define PXA_SSP_PORTS 	3
 
+#define TIMEOUT 100000
+
 struct ssp_info_ {
 	int irq;
 	u32 clock;
@@ -92,13 +94,18 @@ static irqreturn_t ssp_interrupt(int irq, void *dev_id, struct pt_regs *regs)
  * The caller is expected to perform the necessary locking.
  *
  * Returns:
- *   %-ETIMEDOUT	timeout occurred (for future)
+ *   %-ETIMEDOUT	timeout occurred
  *   0			success
  */
 int ssp_write_word(struct ssp_dev *dev, u32 data)
 {
-	while (!(SSSR_P(dev->port) & SSSR_TNF))
+	int timeout = TIMEOUT;
+
+	while (!(SSSR_P(dev->port) & SSSR_TNF)) {
+	        if (!--timeout)
+	        	return -ETIMEDOUT;
 		cpu_relax();
+	}
 
 	SSDR_P(dev->port) = data;
 
@@ -117,15 +124,21 @@ int ssp_write_word(struct ssp_dev *dev, u32 data)
  * The caller is expected to perform the necessary locking.
  *
  * Returns:
- *   %-ETIMEDOUT	timeout occurred (for future)
+ *   %-ETIMEDOUT	timeout occurred
  *   32-bit data	success
  */
-int ssp_read_word(struct ssp_dev *dev)
+int ssp_read_word(struct ssp_dev *dev, u32 *data)
 {
-	while (!(SSSR_P(dev->port) & SSSR_RNE))
-		cpu_relax();
+	int timeout = TIMEOUT;
 
-	return SSDR_P(dev->port);
+	while (!(SSSR_P(dev->port) & SSSR_RNE)) {
+	        if (!--timeout)
+	        	return -ETIMEDOUT;
+		cpu_relax();
+	}
+
+	*data = SSDR_P(dev->port);
+	return 0;
 }
 
 /**
@@ -136,13 +149,21 @@ int ssp_read_word(struct ssp_dev *dev)
  *
  * The caller is expected to perform the necessary locking.
  */
-void ssp_flush(struct ssp_dev *dev)
+int ssp_flush(struct ssp_dev *dev)
 {
+	int timeout = TIMEOUT * 2;
+
 	do {
 		while (SSSR_P(dev->port) & SSSR_RNE) {
+		        if (!--timeout)
+		        	return -ETIMEDOUT;
 			(void) SSDR_P(dev->port);
 		}
+	        if (!--timeout)
+	        	return -ETIMEDOUT;
 	} while (SSSR_P(dev->port) & SSSR_BSY);
+
+	return 0;
 }
 
 /**

arch/arm/mach-s3c2410/Kconfig

@@ -81,9 +81,17 @@ config SMDK2440_CPU2442
 	depends on ARCH_S3C2440
 	select CPU_S3C2442
 
+config MACH_S3C2413
+	bool
+	help
+	  Internal node for S3C2413 verison of SMDK2413, so that
+	  machine_is_s3c2413() will work when MACH_SMDK2413 is
+	  selected
+
 config MACH_SMDK2413
 	bool "SMDK2413"
 	select CPU_S3C2412
+	select MACH_S3C2413
 	select MACH_SMDK
 	help
 	  Say Y here if you are using an SMDK2413

arch/arm/mach-s3c2410/Makefile

@@ -28,6 +28,7 @@ obj-$(CONFIG_PM_SIMTEC)		+= pm-simtec.o
 
 # S3C2412 support
 obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o
+obj-$(CONFIG_CPU_S3C2412)	+= s3c2412-irq.o
 obj-$(CONFIG_CPU_S3C2412)	+= s3c2412-clock.o
 
 #

arch/arm/mach-s3c2410/cpu.h

@@ -8,16 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Modifications:
- *     24-Aug-2004 BJD  Start of generic S3C24XX support
- *     18-Oct-2004 BJD  Moved board struct into this file
- *     04-Jan-2005 BJD  New uart initialisation
- *     10-Jan-2005 BJD  Moved generic init here, specific to cpu headers
- *     14-Jan-2005 BJD  Added s3c24xx_init_clocks() call
- *     10-Mar-2005 LCVR Changed S3C2410_{VA,SZ} to S3C24XX_{VA,SZ} & IODESC_ENT
- *     14-Mar-2005 BJD  Updated for __iomem
- *     15-Jan-2006 LCVR Updated S3C2410_PA_##x to new S3C24XX_PA_##x macro
 */
 
 /* todo - fix when rmk changes iodescs to use `void __iomem *` */

arch/arm/mach-s3c2410/devs.c

@@ -1,22 +1,14 @@
 /* linux/arch/arm/mach-s3c2410/devs.c
  *
  * Copyright (c) 2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ *	Ben Dooks <ben@simtec.co.uk>
  *
- * Base S3C2410 platform device definitions
+ * Base S3C24XX platform device definitions
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * Modifications:
- *     15-Jan-2006 LCVR Using S3C24XX_PA_##x macro for common S3C24XX devices
- *     10-Mar-2005 LCVR Changed S3C2410_{VA,SZ} to S3C24XX_{VA,SZ}
- *     10-Feb-2005 BJD  Added camera from guillaume.gourat@nexvision.tv
- *     29-Aug-2004 BJD  Added timers 0 through 3
- *     29-Aug-2004 BJD  Changed index of devices we only have one of to -1
- *     21-Aug-2004 BJD  Added IRQ_TICK to RTC resources
- *     18-Aug-2004 BJD  Created initial version
 */
 
 #include <linux/kernel.h>

arch/arm/mach-s3c2410/dma.c

@@ -60,7 +60,7 @@ static void __iomem *dma_base;
 static kmem_cache_t *dma_kmem;
 
 /* dma channel state information */
-s3c2410_dma_chan_t s3c2410_chans[S3C2410_DMA_CHANNELS];
+struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
 
 /* debugging functions */
 
@@ -74,7 +74,7 @@ s3c2410_dma_chan_t s3c2410_chans[S3C2410_DMA_CHANNELS];
 #define dma_wrreg(chan, reg, val) writel((val), (chan)->regs + (reg))
 #else
 static inline void
-dma_wrreg(s3c2410_dma_chan_t *chan, int reg, unsigned long val)
+dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val)
 {
 	pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg);
 	writel(val, dma_regaddr(chan, reg));
@@ -102,7 +102,7 @@ struct s3c2410_dma_regstate {
 */
 
 static void
-dmadbg_capture(s3c2410_dma_chan_t *chan, struct s3c2410_dma_regstate *regs)
+dmadbg_capture(struct s3c2410_dma_chan *chan, struct s3c2410_dma_regstate *regs)
 {
 	regs->dcsrc    = dma_rdreg(chan, S3C2410_DMA_DCSRC);
 	regs->disrc    = dma_rdreg(chan, S3C2410_DMA_DISRC);
@@ -112,7 +112,7 @@ dmadbg_capture(s3c2410_dma_chan_t *chan, struct s3c2410_dma_regstate *regs)
 }
 
 static void
-dmadbg_dumpregs(const char *fname, int line, s3c2410_dma_chan_t *chan,
+dmadbg_dumpregs(const char *fname, int line, struct s3c2410_dma_chan *chan,
 		 struct s3c2410_dma_regstate *regs)
 {
 	printk(KERN_DEBUG "dma%d: %s:%d: DCSRC=%08lx, DISRC=%08lx, DSTAT=%08lx DMT=%02lx, DCON=%08lx\n",
@@ -122,7 +122,7 @@ dmadbg_dumpregs(const char *fname, int line, s3c2410_dma_chan_t *chan,
 }
 
 static void
-dmadbg_showchan(const char *fname, int line, s3c2410_dma_chan_t *chan)
+dmadbg_showchan(const char *fname, int line, struct s3c2410_dma_chan *chan)
 {
 	struct s3c2410_dma_regstate state;
 
@@ -136,7 +136,7 @@ dmadbg_showchan(const char *fname, int line, s3c2410_dma_chan_t *chan)
 }
 
 static void
-dmadbg_showregs(const char *fname, int line, s3c2410_dma_chan_t *chan)
+dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan)
 {
 	struct s3c2410_dma_regstate state;
 
@@ -164,7 +164,7 @@ dmadbg_showregs(const char *fname, int line, s3c2410_dma_chan_t *chan)
 */
 
 static void
-s3c2410_dma_stats_timeout(s3c2410_dma_stats_t *stats, int val)
+s3c2410_dma_stats_timeout(struct s3c2410_dma_stats *stats, int val)
 {
 	if (stats == NULL)
 		return;
@@ -183,7 +183,7 @@ s3c2410_dma_stats_timeout(s3c2410_dma_stats_t *stats, int val)
 */
 
 static int
-s3c2410_dma_waitforload(s3c2410_dma_chan_t *chan, int line)
+s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line)
 {
 	int timeout = chan->load_timeout;
 	int took;
@@ -230,8 +230,8 @@ s3c2410_dma_waitforload(s3c2410_dma_chan_t *chan, int line)
 */
 
 static inline int
-s3c2410_dma_loadbuffer(s3c2410_dma_chan_t *chan,
-		       s3c2410_dma_buf_t *buf)
+s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan,
+		       struct s3c2410_dma_buf *buf)
 {
 	unsigned long reload;
 
@@ -304,7 +304,7 @@ s3c2410_dma_loadbuffer(s3c2410_dma_chan_t *chan,
 */
 
 static void
-s3c2410_dma_call_op(s3c2410_dma_chan_t *chan, s3c2410_chan_op_t op)
+s3c2410_dma_call_op(struct s3c2410_dma_chan *chan, enum s3c2410_chan_op op)
 {
 	if (chan->op_fn != NULL) {
 		(chan->op_fn)(chan, op);
@@ -318,8 +318,8 @@ s3c2410_dma_call_op(s3c2410_dma_chan_t *chan, s3c2410_chan_op_t op)
 */
 
 static inline void
-s3c2410_dma_buffdone(s3c2410_dma_chan_t *chan, s3c2410_dma_buf_t *buf,
-		     s3c2410_dma_buffresult_t result)
+s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf,
+		     enum s3c2410_dma_buffresult result)
 {
 	pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n",
 		 chan->callback_fn, buf, buf->id, buf->size, result);
@@ -334,7 +334,7 @@ s3c2410_dma_buffdone(s3c2410_dma_chan_t *chan, s3c2410_dma_buf_t *buf,
  * start a dma channel going
 */
 
-static int s3c2410_dma_start(s3c2410_dma_chan_t *chan)
+static int s3c2410_dma_start(struct s3c2410_dma_chan *chan)
 {
 	unsigned long tmp;
 	unsigned long flags;
@@ -430,7 +430,7 @@ static int s3c2410_dma_start(s3c2410_dma_chan_t *chan)
 */
 
 static int
-s3c2410_dma_canload(s3c2410_dma_chan_t *chan)
+s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
 {
 	if (chan->load_state == S3C2410_DMALOAD_NONE ||
 	    chan->load_state == S3C2410_DMALOAD_1RUNNING)
@@ -460,8 +460,8 @@ s3c2410_dma_canload(s3c2410_dma_chan_t *chan)
 int s3c2410_dma_enqueue(unsigned int channel, void *id,
 			dma_addr_t data, int size)
 {
-	s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
-	s3c2410_dma_buf_t *buf;
+	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
+	struct s3c2410_dma_buf *buf;
 	unsigned long flags;
 
 	check_channel(channel);
@@ -540,7 +540,7 @@ int s3c2410_dma_enqueue(unsigned int channel, void *id,
 EXPORT_SYMBOL(s3c2410_dma_enqueue);
 
 static inline void
-s3c2410_dma_freebuf(s3c2410_dma_buf_t *buf)
+s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf)
 {
 	int magicok = (buf->magic == BUF_MAGIC);
 
@@ -560,7 +560,7 @@ s3c2410_dma_freebuf(s3c2410_dma_buf_t *buf)
 */
 
 static inline void
-s3c2410_dma_lastxfer(s3c2410_dma_chan_t *chan)
+s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan)
 {
 	pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n",
 		 chan->number, chan->load_state);
@@ -601,8 +601,8 @@ s3c2410_dma_lastxfer(s3c2410_dma_chan_t *chan)
 static irqreturn_t
 s3c2410_dma_irq(int irq, void *devpw, struct pt_regs *regs)
 {
-	s3c2410_dma_chan_t *chan = (s3c2410_dma_chan_t *)devpw;
-	s3c2410_dma_buf_t  *buf;
+	struct s3c2410_dma_chan *chan = (struct s3c2410_dma_chan *)devpw;
+	struct s3c2410_dma_buf  *buf;
 
 	buf = chan->curr;
 
@@ -731,10 +731,10 @@ s3c2410_dma_irq(int irq, void *devpw, struct pt_regs *regs)
  * get control of an dma channel
 */
 
-int s3c2410_dma_request(unsigned int channel, s3c2410_dma_client_t *client,
+int s3c2410_dma_request(unsigned int channel, struct s3c2410_dma_client *client,
 			void *dev)
 {
-	s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
+	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
 	unsigned long flags;
 	int err;
 
@@ -807,9 +807,9 @@ EXPORT_SYMBOL(s3c2410_dma_request);
  * allowed to go through.
 */
 
-int s3c2410_dma_free(dmach_t channel, s3c2410_dma_client_t *client)
+int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client)
 {
-	s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
+	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
 	unsigned long flags;
 
 	check_channel(channel);
@@ -846,7 +846,7 @@ int s3c2410_dma_free(dmach_t channel, s3c2410_dma_client_t *client)
 
 EXPORT_SYMBOL(s3c2410_dma_free);
 
-static int s3c2410_dma_dostop(s3c2410_dma_chan_t *chan)
+static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan)
 {
 	unsigned long tmp;
 	unsigned long flags;
@@ -880,7 +880,7 @@ static int s3c2410_dma_dostop(s3c2410_dma_chan_t *chan)
 	return 0;
 }
 
-void s3c2410_dma_waitforstop(s3c2410_dma_chan_t *chan)
+void s3c2410_dma_waitforstop(struct s3c2410_dma_chan *chan)
 {
 	unsigned long tmp;
 	unsigned int timeout = 0x10000;
@@ -901,9 +901,9 @@ void s3c2410_dma_waitforstop(s3c2410_dma_chan_t *chan)
  * stop the channel, and remove all current and pending transfers
 */
 
-static int s3c2410_dma_flush(s3c2410_dma_chan_t *chan)
+static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan)
 {
-	s3c2410_dma_buf_t *buf, *next;
+	struct s3c2410_dma_buf *buf, *next;
 	unsigned long flags;
 
 	pr_debug("%s: chan %p (%d)\n", __FUNCTION__, chan, chan->number);
@@ -958,7 +958,7 @@ static int s3c2410_dma_flush(s3c2410_dma_chan_t *chan)
 }
 
 int
-s3c2410_dma_started(s3c2410_dma_chan_t *chan)
+s3c2410_dma_started(struct s3c2410_dma_chan *chan)
 {
 	unsigned long flags;
 
@@ -995,9 +995,9 @@ s3c2410_dma_started(s3c2410_dma_chan_t *chan)
 }
 
 int
-s3c2410_dma_ctrl(dmach_t channel, s3c2410_chan_op_t op)
+s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op)
 {
-	s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
+	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
 
 	check_channel(channel);
 
@@ -1046,7 +1046,7 @@ int s3c2410_dma_config(dmach_t channel,
 		       int xferunit,
 		       int dcon)
 {
-	s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
+	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
 
 	pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n",
 		 __FUNCTION__, channel, xferunit, dcon);
@@ -1086,7 +1086,7 @@ EXPORT_SYMBOL(s3c2410_dma_config);
 
 int s3c2410_dma_setflags(dmach_t channel, unsigned int flags)
 {
-	s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
+	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
 
 	check_channel(channel);
 
@@ -1106,7 +1106,7 @@ EXPORT_SYMBOL(s3c2410_dma_setflags);
 
 int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn)
 {
-	s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
+	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
 
 	check_channel(channel);
 
@@ -1121,7 +1121,7 @@ EXPORT_SYMBOL(s3c2410_dma_set_opfn);
 
 int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn)
 {
-	s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
+	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
 
 	check_channel(channel);
 
@@ -1149,11 +1149,11 @@ EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn);
 */
 
 int s3c2410_dma_devconfig(int channel,
-			  s3c2410_dmasrc_t source,
+			  enum s3c2410_dmasrc source,
 			  int hwcfg,
 			  unsigned long devaddr)
 {
-	s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
+	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
 
 	check_channel(channel);
 
@@ -1200,7 +1200,7 @@ EXPORT_SYMBOL(s3c2410_dma_devconfig);
 
 int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst)
 {
- 	s3c2410_dma_chan_t *chan = &s3c2410_chans[channel];
+ 	struct s3c2410_dma_chan *chan = &s3c2410_chans[channel];
 
  	check_channel(channel);
 
@@ -1222,7 +1222,7 @@ EXPORT_SYMBOL(s3c2410_dma_getposition);
 
 static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state)
 {
-	s3c2410_dma_chan_t *cp = container_of(dev, s3c2410_dma_chan_t, dev);
+	struct s3c2410_dma_chan *cp = container_of(dev, struct s3c2410_dma_chan, dev);
 
 	printk(KERN_DEBUG "suspending dma channel %d\n", cp->number);
 
@@ -1262,7 +1262,7 @@ static struct sysdev_class dma_sysclass = {
 
 static void s3c2410_dma_cache_ctor(void *p, kmem_cache_t *c, unsigned long f)
 {
-	memset(p, 0, sizeof(s3c2410_dma_buf_t));
+	memset(p, 0, sizeof(struct s3c2410_dma_buf));
 }
 
 
@@ -1270,7 +1270,7 @@ static void s3c2410_dma_cache_ctor(void *p, kmem_cache_t *c, unsigned long f)
 
 static int __init s3c2410_init_dma(void)
 {
-	s3c2410_dma_chan_t *cp;
+	struct s3c2410_dma_chan *cp;
 	int channel;
 	int ret;
 
@@ -1288,7 +1288,7 @@ static int __init s3c2410_init_dma(void)
 		goto err;
 	}
 
-	dma_kmem = kmem_cache_create("dma_desc", sizeof(s3c2410_dma_buf_t), 0,
+	dma_kmem = kmem_cache_create("dma_desc", sizeof(struct s3c2410_dma_buf), 0,
 				     SLAB_HWCACHE_ALIGN,
 				     s3c2410_dma_cache_ctor, NULL);
 
@@ -1301,7 +1301,7 @@ static int __init s3c2410_init_dma(void)
 	for (channel = 0; channel < S3C2410_DMA_CHANNELS; channel++) {
 		cp = &s3c2410_chans[channel];
 
-		memset(cp, 0, sizeof(s3c2410_dma_chan_t));
+		memset(cp, 0, sizeof(struct s3c2410_dma_chan));
 
 		/* dma channel irqs are in order.. */
 		cp->number = channel;

arch/arm/mach-s3c2410/irq.c

@@ -86,7 +86,7 @@ unsigned long s3c_irqwake_intmask	= 0xffffffffL;
 unsigned long s3c_irqwake_eintallow	= 0x0000fff0L;
 unsigned long s3c_irqwake_eintmask	= 0xffffffffL;
 
-static int
+int
 s3c_irq_wake(unsigned int irqno, unsigned int state)
 {
 	unsigned long irqbit = 1 << (irqno - IRQ_EINT0);
@@ -260,7 +260,7 @@ s3c_irqext_unmask(unsigned int irqno)
 	s3c_irq_unmask((irqno <= (IRQ_EINT7 - EXTINT_OFF)) ? IRQ_EINT4t7 : IRQ_EINT8t23);
 }
 
-static int
+int
 s3c_irqext_type(unsigned int irq, unsigned int type)
 {
 	void __iomem *extint_reg;

arch/arm/mach-s3c2410/irq.h

@@ -97,3 +97,13 @@ s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group)
 		__raw_writel(parentmask, S3C2410_INTPND);
 	}
 }
+
+/* exported for use in arch/arm/mach-s3c2410 */
+
+#ifdef CONFIG_PM
+extern int s3c_irq_wake(unsigned int irqno, unsigned int state);
+#else
+#define s3c_irq_wake NULL
+#endif
+
+extern int s3c_irqext_type(unsigned int irq, unsigned int type);

arch/arm/mach-s3c2410/mach-bast.c

@@ -8,31 +8,6 @@
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
- *
- * Modifications:
- *     14-Sep-2004 BJD  USB power control
- *     20-Aug-2004 BJD  Added s3c2410_board struct
- *     18-Aug-2004 BJD  Added platform devices from default set
- *     16-May-2003 BJD  Created initial version
- *     16-Aug-2003 BJD  Fixed header files and copyright, added URL
- *     05-Sep-2003 BJD  Moved to v2.6 kernel
- *     06-Jan-2003 BJD  Updates for <arch/map.h>
- *     18-Jan-2003 BJD  Added serial port configuration
- *     05-Oct-2004 BJD  Power management code
- *     04-Nov-2004 BJD  Updated serial port clocks
- *     04-Jan-2005 BJD  New uart init call
- *     10-Jan-2005 BJD  Removed include of s3c2410.h
- *     14-Jan-2005 BJD  Add support for muitlple NAND devices
- *     03-Mar-2005 BJD  Ensured that bast-cpld.h is included
- *     10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
- *     14-Mar-2005 BJD  Updated for __iomem changes
- *     22-Jun-2005 BJD  Added DM9000 platform information
- *     28-Jun-2005 BJD  Moved pm functionality out to common code
- *     17-Jul-2005 BJD  Changed to platform device for SuperIO 16550s
- *     25-Jul-2005 BJD  Removed ASIX static mappings
- *     27-Jul-2005 BJD  Ensure maximum frequency of i2c bus
- *     20-Sep-2005 BJD  Added static to non-exported items
- *     26-Oct-2005 BJD  Added FB platform data
 */
 
 #include <linux/kernel.h>

arch/arm/mach-s3c2410/mach-h1940.c

@@ -9,23 +9,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * Modifications:
- *     16-May-2003 BJD  Created initial version
- *     16-Aug-2003 BJD  Fixed header files and copyright, added URL
- *     05-Sep-2003 BJD  Moved to v2.6 kernel
- *     06-Jan-2003 BJD  Updates for <arch/map.h>
- *     18-Jan-2003 BJD  Added serial port configuration
- *     17-Feb-2003 BJD  Copied to mach-ipaq.c
- *     21-Aug-2004 BJD  Added struct s3c2410_board
- *     04-Sep-2004 BJD  Changed uart init, renamed ipaq_ -> h1940_
- *     18-Oct-2004 BJD  Updated new board structure name
- *     04-Nov-2004 BJD  Change for new serial clock
- *     04-Jan-2005 BJD  Updated uart init call
- *     10-Jan-2005 BJD  Removed include of s3c2410.h
- *     14-Jan-2005 BJD  Added clock init
- *     10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
- *     20-Sep-2005 BJD  Added static to non-exported items
- *     26-Oct-2005 BJD  Changed name of fb init call
 */
 
 #include <linux/kernel.h>

arch/arm/mach-s3c2410/mach-rx3715.c

@@ -9,15 +9,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * Modifications:
- *	16-Sep-2004 BJD  Copied from mach-h1940.c
- *	25-Oct-2004 BJD  Updates for 2.6.10-rc1
- *	10-Jan-2005 BJD  Removed include of s3c2410.h s3c2440.h
- *	14-Jan-2005 BJD  Added new clock init
- *	10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
- *	14-Mar-2005 BJD  Fixed __iomem warnings
- *	20-Sep-2005 BJD  Added static to non-exported items
- *	31-Oct-2005 BJD  Added LCD setup for framebuffer
 */
 
 #include <linux/kernel.h>

arch/arm/mach-s3c2410/mach-smdk2410.c

@@ -27,10 +27,6 @@
  * derived from linux/arch/arm/mach-s3c2410/mach-bast.c, written by
  * Ben Dooks <ben@simtec.co.uk>
  *
- * 10-Mar-2005 LCVR  Changed S3C2410_VA to S3C24XX_VA
- * 20-Sep-2005 BJD   Added static to non-exported items
- * 01-Apr-2006 BJD   Moved init code to common smdk
- *
  ***********************************************************************/
 
 #include <linux/kernel.h>

arch/arm/mach-s3c2410/mach-smdk2413.c

@@ -112,7 +112,20 @@ static void __init smdk2413_machine_init(void)
 	smdk_machine_init();
 }
 
-MACHINE_START(S3C2413, "SMDK2413")
+MACHINE_START(S3C2413, "S3C2413")
+	/* Maintainer: Ben Dooks <ben@fluff.org> */
+	.phys_io	= S3C2410_PA_UART,
+	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
+	.boot_params	= S3C2410_SDRAM_PA + 0x100,
+
+	.fixup		= smdk2413_fixup,
+	.init_irq	= s3c24xx_init_irq,
+	.map_io		= smdk2413_map_io,
+	.init_machine	= smdk2413_machine_init,
+	.timer		= &s3c24xx_timer,
+MACHINE_END
+
+MACHINE_START(SMDK2413, "SMDK2413")
 	/* Maintainer: Ben Dooks <ben@fluff.org> */
 	.phys_io	= S3C2410_PA_UART,
 	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,

arch/arm/mach-s3c2410/mach-vr1000.c

@@ -10,25 +10,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * Modifications:
- *     14-Sep-2004 BJD  USB Power control
- *     04-Sep-2004 BJD  Added new uart init, and io init
- *     21-Aug-2004 BJD  Added struct s3c2410_board
- *     06-Aug-2004 BJD  Fixed call to time initialisation
- *     05-Apr-2004 BJD  Copied to make mach-vr1000.c
- *     18-Oct-2004 BJD  Updated board struct
- *     04-Nov-2004 BJD  Clock and serial configuration update
- *
- *     04-Jan-2005 BJD  Updated uart init call
- *     10-Jan-2005 BJD  Removed include of s3c2410.h
- *     14-Jan-2005 BJD  Added clock init
- *     15-Jan-2005 BJD  Add serial port device definition
- *     20-Jan-2005 BJD  Use UPF_IOREMAP for ports
- *     10-Feb-2005 BJD  Added power-off capability
- *     10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
- *     14-Mar-2006 BJD  void __iomem fixes
- *     22-Jun-2006 BJD  Added DM9000 platform information
- *     20-Sep-2005 BJD  Added static to non-exported items
 */
 
 #include <linux/kernel.h>

arch/arm/mach-s3c2410/s3c2400-gpio.c

@@ -17,10 +17,7 @@
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * Changelog
- *	15-Jan-2006  LCVR  Splitted from gpio.c, adding support for the S3C2400
- */
+*/
 
 #include <linux/kernel.h>
 #include <linux/init.h>

arch/arm/mach-s3c2410/s3c2410.h

@@ -9,14 +9,6 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
- * Modifications:
- *     18-Aug-2004 BJD  Created initial version
- *     20-Aug-2004 BJD  Added s3c2410_board struct
- *     04-Sep-2004 BJD  Added s3c2410_init_uarts() call
- *     17-Oct-2004 BJD  Moved board out to cpu
- *     04-Jan-2005 BJD  Changed uart init
- *     10-Jan-2005 BJD  Removed timer to cpu.h, moved 2410 specific bits here
- *     14-Jan-2005 BJD  Added s3c2410_init_clocks call
 */
 
 #ifdef CONFIG_CPU_S3C2410

arch/arm/mach-s3c2410/s3c2412-irq.c

@@ -0,0 +1,130 @@
+/* linux/arch/arm/mach-s3c2412/s3c2412-irq.c
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/ptrace.h>
+#include <linux/sysdev.h>
+
+#include <asm/hardware.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+
+#include <asm/mach/irq.h>
+
+#include <asm/arch/regs-irq.h>
+#include <asm/arch/regs-gpio.h>
+
+#include "cpu.h"
+#include "irq.h"
+
+/* the s3c2412 changes the behaviour of IRQ_EINT0 through IRQ_EINT3 by
+ * having them turn up in both the INT* and the EINT* registers. Whilst
+ * both show the status, they both now need to be acked when the IRQs
+ * go off.
+*/
+
+static void
+s3c2412_irq_mask(unsigned int irqno)
+{
+	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+	unsigned long mask;
+
+	mask = __raw_readl(S3C2410_INTMSK);
+	__raw_writel(mask | bitval, S3C2410_INTMSK);
+
+	mask = __raw_readl(S3C2412_EINTMASK);
+	__raw_writel(mask | bitval, S3C2412_EINTMASK);
+}
+
+static inline void
+s3c2412_irq_ack(unsigned int irqno)
+{
+	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+
+	__raw_writel(bitval, S3C2412_EINTPEND);
+	__raw_writel(bitval, S3C2410_SRCPND);
+	__raw_writel(bitval, S3C2410_INTPND);
+}
+
+static inline void
+s3c2412_irq_maskack(unsigned int irqno)
+{
+	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+	unsigned long mask;
+
+	mask = __raw_readl(S3C2410_INTMSK);
+	__raw_writel(mask|bitval, S3C2410_INTMSK);
+
+	mask = __raw_readl(S3C2412_EINTMASK);
+	__raw_writel(mask | bitval, S3C2412_EINTMASK);
+
+	__raw_writel(bitval, S3C2412_EINTPEND);
+	__raw_writel(bitval, S3C2410_SRCPND);
+	__raw_writel(bitval, S3C2410_INTPND);
+}
+
+static void
+s3c2412_irq_unmask(unsigned int irqno)
+{
+	unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
+	unsigned long mask;
+
+	mask = __raw_readl(S3C2412_EINTMASK);
+	__raw_writel(mask & ~bitval, S3C2412_EINTMASK);
+
+	mask = __raw_readl(S3C2410_INTMSK);
+	__raw_writel(mask & ~bitval, S3C2410_INTMSK);
+}
+
+static struct irqchip s3c2412_irq_eint0t4 = {
+	.ack	   = s3c2412_irq_ack,
+	.mask	   = s3c2412_irq_mask,
+	.unmask	   = s3c2412_irq_unmask,
+	.set_wake  = s3c_irq_wake,
+	.set_type  = s3c_irqext_type,
+};
+
+static int s3c2412_irq_add(struct sys_device *sysdev)
+{
+	unsigned int irqno;
+
+	for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
+		set_irq_chip(irqno, &s3c2412_irq_eint0t4);
+		set_irq_handler(irqno, do_edge_IRQ);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+
+	return 0;
+}
+
+static struct sysdev_driver s3c2412_irq_driver = {
+	.add		= s3c2412_irq_add,
+};
+
+static int s3c2412_irq_init(void)
+{
+	return sysdev_driver_register(&s3c2412_sysclass, &s3c2412_irq_driver);
+}
+
+arch_initcall(s3c2412_irq_init);

arch/arm/mach-s3c2410/s3c2412.c

@@ -35,11 +35,15 @@
 #include <asm/mach/irq.h>
 
 #include <asm/hardware.h>
+#include <asm/proc-fns.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 
+#include <asm/arch/idle.h>
+
 #include <asm/arch/regs-clock.h>
 #include <asm/arch/regs-serial.h>
+#include <asm/arch/regs-power.h>
 #include <asm/arch/regs-gpio.h>
 #include <asm/arch/regs-gpioj.h>
 #include <asm/arch/regs-dsc.h>
@@ -75,6 +79,27 @@ void __init s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 	s3c_device_nand.name = "s3c2412-nand";
 }
 
+/* s3c2412_idle
+ *
+ * use the standard idle call by ensuring the idle mode
+ * in power config, then issuing the idle co-processor
+ * instruction
+*/
+
+static void s3c2412_idle(void)
+{
+	unsigned long tmp;
+
+	/* ensure our idle mode is to go to idle */
+
+	tmp = __raw_readl(S3C2412_PWRCFG);
+	tmp &= ~S3C2412_PWRCFG_STANDBYWFI_MASK;
+	tmp |= S3C2412_PWRCFG_STANDBYWFI_IDLE;
+	__raw_writel(tmp, S3C2412_PWRCFG);
+
+	cpu_do_idle();
+}
+
 /* s3c2412_map_io
  *
  * register the standard cpu IO areas, and any passed in from the
@@ -87,6 +112,10 @@ void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size)
 
 	s3c24xx_va_gpio2 = S3C24XX_VA_GPIO + 0x10;
 
+	/* set our idle function */
+
+	s3c24xx_idle = s3c2412_idle;
+
 	/* register our io-tables */
 
 	iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc));

arch/arm/mach-s3c2410/s3c2440-irq.c

@@ -17,9 +17,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  *
- * Changelog:
- *	25-Jul-2005 BJD		Split from irq.c
- *
 */
 
 #include <linux/init.h>

arch/arm/mach-s3c2410/s3c244x-irq.c

@@ -17,9 +17,6 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  *
- * Changelog:
- *	25-Jul-2005 BJD		Split from irq.c
- *
 */
 
 #include <linux/init.h>
@@ -122,21 +119,24 @@ static int s3c244x_irq_add(struct sys_device *sysdev)
 	return 0;
 }
 
-static struct sysdev_driver s3c244x_irq_driver = {
+static struct sysdev_driver s3c2440_irq_driver = {
 	.add	= s3c244x_irq_add,
 };
 
 static int s3c2440_irq_init(void)
 {
-	return sysdev_driver_register(&s3c2440_sysclass, &s3c244x_irq_driver);
+	return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_irq_driver);
 }
 
 arch_initcall(s3c2440_irq_init);
 
+static struct sysdev_driver s3c2442_irq_driver = {
+	.add	= s3c244x_irq_add,
+};
 
 static int s3c2442_irq_init(void)
 {
-	return sysdev_driver_register(&s3c2442_sysclass, &s3c244x_irq_driver);
+	return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_irq_driver);
 }
 
 arch_initcall(s3c2442_irq_init);

arch/arm/mach-sa1100/ssp.c

@@ -23,6 +23,8 @@
 #include <asm/hardware.h>
 #include <asm/hardware/ssp.h>
 
+#define TIMEOUT 100000
+
 static irqreturn_t ssp_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
 	unsigned int status = Ser4SSSR;
@@ -47,18 +49,27 @@ static irqreturn_t ssp_interrupt(int irq, void *dev_id, struct pt_regs *regs)
  * The caller is expected to perform the necessary locking.
  *
  * Returns:
- *   %-ETIMEDOUT	timeout occurred (for future)
+ *   %-ETIMEDOUT	timeout occurred
  *   0			success
  */
 int ssp_write_word(u16 data)
 {
-	while (!(Ser4SSSR & SSSR_TNF))
+	int timeout = TIMEOUT;
+
+	while (!(Ser4SSSR & SSSR_TNF)) {
+	        if (!--timeout)
+	        	return -ETIMEDOUT;
 		cpu_relax();
+	}
 
 	Ser4SSDR = data;
 
-	while (!(Ser4SSSR & SSSR_BSY))
+	timeout = TIMEOUT;
+	while (!(Ser4SSSR & SSSR_BSY)) {
+	        if (!--timeout)
+	        	return -ETIMEDOUT;
 		cpu_relax();
+	}
 
 	return 0;
 }
@@ -75,15 +86,22 @@ int ssp_write_word(u16 data)
  * The caller is expected to perform the necessary locking.
  *
  * Returns:
- *   %-ETIMEDOUT	timeout occurred (for future)
+ *   %-ETIMEDOUT	timeout occurred
  *   16-bit data	success
  */
-int ssp_read_word(void)
+int ssp_read_word(u16 *data)
 {
-	while (!(Ser4SSSR & SSSR_RNE))
-		cpu_relax();
+	int timeout = TIMEOUT;
 
-	return Ser4SSDR;
+	while (!(Ser4SSSR & SSSR_RNE)) {
+	        if (!--timeout)
+	        	return -ETIMEDOUT;
+		cpu_relax();
+	}
+
+	*data = (u16)Ser4SSDR;
+
+	return 0;
 }
 
 /**
@@ -93,14 +111,26 @@ int ssp_read_word(void)
  * is empty.
  *
  * The caller is expected to perform the necessary locking.
+ *
+ * Returns:
+ *   %-ETIMEDOUT	timeout occurred
+ *   0			success
  */
-void ssp_flush(void)
+int ssp_flush(void)
 {
+	int timeout = TIMEOUT * 2;
+
 	do {
 		while (Ser4SSSR & SSSR_RNE) {
+		        if (!--timeout)
+		        	return -ETIMEDOUT;
 			(void) Ser4SSDR;
 		}
+	        if (!--timeout)
+	        	return -ETIMEDOUT;
 	} while (Ser4SSSR & SSSR_BSY);
+
+	return 0;
 }
 
 /**

arch/arm/mm/Kconfig

@@ -46,7 +46,7 @@ config CPU_ARM710
 config CPU_ARM720T
 	bool "Support ARM720T processor" if !ARCH_CLPS711X && !ARCH_L7200 && !ARCH_CDB89712 && ARCH_INTEGRATOR
 	default y if ARCH_CLPS711X || ARCH_L7200 || ARCH_CDB89712 || ARCH_H720X
-	select CPU_32v4
+	select CPU_32v4T
 	select CPU_ABRT_LV4T
 	select CPU_CACHE_V4
 	select CPU_CACHE_VIVT
@@ -64,7 +64,7 @@ config CPU_ARM920T
 	bool "Support ARM920T processor"
 	depends on ARCH_EP93XX || ARCH_INTEGRATOR || CPU_S3C2410 || CPU_S3C2440 || CPU_S3C2442 || ARCH_IMX || ARCH_AAEC2000 || ARCH_AT91RM9200
 	default y if CPU_S3C2410 || CPU_S3C2440 || CPU_S3C2442 || ARCH_AT91RM9200
-	select CPU_32v4
+	select CPU_32v4T
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
@@ -85,7 +85,7 @@ config CPU_ARM922T
 	bool "Support ARM922T processor" if ARCH_INTEGRATOR
 	depends on ARCH_LH7A40X || ARCH_INTEGRATOR
 	default y if ARCH_LH7A40X
-	select CPU_32v4
+	select CPU_32v4T
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
@@ -104,7 +104,7 @@ config CPU_ARM925T
  	bool "Support ARM925T processor" if ARCH_OMAP1
  	depends on ARCH_OMAP15XX
  	default y if ARCH_OMAP15XX
-	select CPU_32v4
+	select CPU_32v4T
 	select CPU_ABRT_EV4T
 	select CPU_CACHE_V4WT
 	select CPU_CACHE_VIVT
@@ -285,6 +285,11 @@ config CPU_32v4
 	select TLS_REG_EMUL if SMP || !MMU
 	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
 
+config CPU_32v4T
+	bool
+	select TLS_REG_EMUL if SMP || !MMU
+	select NEEDS_SYSCALL_FOR_CMPXCHG if SMP
+
 config CPU_32v5
 	bool
 	select TLS_REG_EMUL if SMP || !MMU

arch/arm/mm/flush.c

@@ -87,6 +87,32 @@ void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsig
 	if (cache_is_vipt_aliasing())
 		flush_pfn_alias(pfn, user_addr);
 }
+
+void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
+			 unsigned long uaddr, void *kaddr,
+			 unsigned long len, int write)
+{
+	if (cache_is_vivt()) {
+		if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
+			unsigned long addr = (unsigned long)kaddr;
+			__cpuc_coherent_kern_range(addr, addr + len);
+		}
+		return;
+	}
+
+	if (cache_is_vipt_aliasing()) {
+		flush_pfn_alias(page_to_pfn(page), uaddr);
+		return;
+	}
+
+	/* VIPT non-aliasing cache */
+	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask) &&
+	    vma->vm_flags | VM_EXEC) {
+		unsigned long addr = (unsigned long)kaddr;
+		/* only flushing the kernel mapping on non-aliasing VIPT */
+		__cpuc_coherent_kern_range(addr, addr + len);
+	}
+}
 #else
 #define flush_pfn_alias(pfn,vaddr)	do { } while (0)
 #endif

arch/arm/mm/proc-arm926.S

@@ -480,7 +480,7 @@ __arm926_proc_info:
 	b	__arm926_setup
 	.long	cpu_arch_name
 	.long	cpu_elf_name
-	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_JAVA
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_VFP|HWCAP_EDSP|HWCAP_JAVA
 	.long	cpu_arm926_name
 	.long	arm926_processor_functions
 	.long	v4wbi_tlb_fns

arch/arm/mm/proc-xscale.S

@@ -644,7 +644,7 @@ __80219_proc_info:
 	.type	__8032x_proc_info,#object
 __8032x_proc_info:
 	.long	0x69052420
-	.long	0xffffffe0
+	.long	0xfffff7e0
 	.long   PMD_TYPE_SECT | \
 		PMD_SECT_BUFFERABLE | \
 		PMD_SECT_CACHEABLE | \

arch/arm/vfp/vfp.h

@@ -156,7 +156,7 @@ struct vfp_single {
 };
 
 extern s32 vfp_get_float(unsigned int reg);
-extern void vfp_put_float(unsigned int reg, s32 val);
+extern void vfp_put_float(s32 val, unsigned int reg);
 
 /*
  * VFP_SINGLE_MANTISSA_BITS - number of bits in the mantissa
@@ -267,7 +267,7 @@ struct vfp_double {
  */
 #define VFP_REG_ZERO	16
 extern u64 vfp_get_double(unsigned int reg);
-extern void vfp_put_double(unsigned int reg, u64 val);
+extern void vfp_put_double(u64 val, unsigned int reg);
 
 #define VFP_DOUBLE_MANTISSA_BITS	(52)
 #define VFP_DOUBLE_EXPONENT_BITS	(11)
@@ -341,15 +341,17 @@ static inline int vfp_double_type(struct vfp_double *s)
 
 u32 vfp_double_normaliseround(int dd, struct vfp_double *vd, u32 fpscr, u32 exceptions, const char *func);
 
-/*
- * System registers
- */
-extern u32 vfp_get_sys(unsigned int reg);
-extern void vfp_put_sys(unsigned int reg, u32 val);
-
 u32 vfp_estimate_sqrt_significand(u32 exponent, u32 significand);
 
 /*
  * A special flag to tell the normalisation code not to normalise.
  */
 #define VFP_NAN_FLAG	0x100
+
+/*
+ * A bit pattern used to indicate the initial (unset) value of the
+ * exception mask, in case nothing handles an instruction.  This
+ * doesn't include the NAN flag, which get masked out before
+ * we check for an error.
+ */
+#define VFP_EXCEPTION_ERROR	((u32)-1 & ~VFP_NAN_FLAG)

arch/arm/vfp/vfpdouble.c

@@ -195,7 +195,7 @@ u32 vfp_double_normaliseround(int dd, struct vfp_double *vd, u32 fpscr, u32 exce
 		s64 d = vfp_double_pack(vd);
 		pr_debug("VFP: %s: d(d%d)=%016llx exceptions=%08x\n", func,
 			 dd, d, exceptions);
-		vfp_put_double(dd, d);
+		vfp_put_double(d, dd);
 	}
 	return exceptions;
 }
@@ -250,19 +250,19 @@ vfp_propagate_nan(struct vfp_double *vdd, struct vfp_double *vdn,
  */
 static u32 vfp_double_fabs(int dd, int unused, int dm, u32 fpscr)
 {
-	vfp_put_double(dd, vfp_double_packed_abs(vfp_get_double(dm)));
+	vfp_put_double(vfp_double_packed_abs(vfp_get_double(dm)), dd);
 	return 0;
 }
 
 static u32 vfp_double_fcpy(int dd, int unused, int dm, u32 fpscr)
 {
-	vfp_put_double(dd, vfp_get_double(dm));
+	vfp_put_double(vfp_get_double(dm), dd);
 	return 0;
 }
 
 static u32 vfp_double_fneg(int dd, int unused, int dm, u32 fpscr)
 {
-	vfp_put_double(dd, vfp_double_packed_negate(vfp_get_double(dm)));
+	vfp_put_double(vfp_double_packed_negate(vfp_get_double(dm)), dd);
 	return 0;
 }
 
@@ -287,7 +287,7 @@ static u32 vfp_double_fsqrt(int dd, int unused, int dm, u32 fpscr)
 			vdp = &vfp_double_default_qnan;
 			ret = FPSCR_IOC;
 		}
-		vfp_put_double(dd, vfp_double_pack(vdp));
+		vfp_put_double(vfp_double_pack(vdp), dd);
 		return ret;
 	}
 
@@ -465,7 +465,7 @@ static u32 vfp_double_fcvts(int sd, int unused, int dm, u32 fpscr)
 	 */
 	if (tm & (VFP_INFINITY|VFP_NAN)) {
 		vsd.exponent = 255;
-		if (tm & VFP_NAN)
+		if (tm == VFP_QNAN)
 			vsd.significand |= VFP_SINGLE_SIGNIFICAND_QNAN;
 		goto pack_nan;
 	} else if (tm & VFP_ZERO)
@@ -476,7 +476,7 @@ static u32 vfp_double_fcvts(int sd, int unused, int dm, u32 fpscr)
 	return vfp_single_normaliseround(sd, &vsd, fpscr, exceptions, "fcvts");
 
  pack_nan:
-	vfp_put_float(sd, vfp_single_pack(&vsd));
+	vfp_put_float(vfp_single_pack(&vsd), sd);
 	return exceptions;
 }
 
@@ -573,7 +573,7 @@ static u32 vfp_double_ftoui(int sd, int unused, int dm, u32 fpscr)
 
 	pr_debug("VFP: ftoui: d(s%d)=%08x exceptions=%08x\n", sd, d, exceptions);
 
-	vfp_put_float(sd, d);
+	vfp_put_float(d, sd);
 
 	return exceptions;
 }
@@ -648,7 +648,7 @@ static u32 vfp_double_ftosi(int sd, int unused, int dm, u32 fpscr)
 
 	pr_debug("VFP: ftosi: d(s%d)=%08x exceptions=%08x\n", sd, d, exceptions);
 
-	vfp_put_float(sd, (s32)d);
+	vfp_put_float((s32)d, sd);
 
 	return exceptions;
 }
@@ -1084,7 +1084,7 @@ static u32 vfp_double_fdiv(int dd, int dn, int dm, u32 fpscr)
  vdn_nan:
 	exceptions = vfp_propagate_nan(&vdd, &vdn, &vdm, fpscr);
  pack:
-	vfp_put_double(dd, vfp_double_pack(&vdd));
+	vfp_put_double(vfp_double_pack(&vdd), dd);
 	return exceptions;
 
  vdm_nan:
@@ -1104,7 +1104,7 @@ static u32 vfp_double_fdiv(int dd, int dn, int dm, u32 fpscr)
 	goto pack;
 
  invalid:
-	vfp_put_double(dd, vfp_double_pack(&vfp_double_default_qnan));
+	vfp_put_double(vfp_double_pack(&vfp_double_default_qnan), dd);
 	return FPSCR_IOC;
 }
 
@@ -1127,7 +1127,7 @@ u32 vfp_double_cpdo(u32 inst, u32 fpscr)
 {
 	u32 op = inst & FOP_MASK;
 	u32 exceptions = 0;
-	unsigned int dd = vfp_get_dd(inst);
+	unsigned int dest;
 	unsigned int dn = vfp_get_dn(inst);
 	unsigned int dm = vfp_get_dm(inst);
 	unsigned int vecitr, veclen, vecstride;
@@ -1136,11 +1136,21 @@ u32 vfp_double_cpdo(u32 inst, u32 fpscr)
 	veclen = fpscr & FPSCR_LENGTH_MASK;
 	vecstride = (1 + ((fpscr & FPSCR_STRIDE_MASK) == FPSCR_STRIDE_MASK)) * 2;
 
+	/*
+	 * fcvtds takes an sN register number as destination, not dN.
+	 * It also always operates on scalars.
+	 */
+	if ((inst & FEXT_MASK) == FEXT_FCVT) {
+		veclen = 0;
+		dest = vfp_get_sd(inst);
+	} else
+		dest = vfp_get_dd(inst);
+
 	/*
 	 * If destination bank is zero, vector length is always '1'.
 	 * ARM DDI0100F C5.1.3, C5.3.2.
 	 */
-	if (FREG_BANK(dd) == 0)
+	if (FREG_BANK(dest) == 0)
 		veclen = 0;
 
 	pr_debug("VFP: vecstride=%u veclen=%u\n", vecstride,
@@ -1153,16 +1163,20 @@ u32 vfp_double_cpdo(u32 inst, u32 fpscr)
 	for (vecitr = 0; vecitr <= veclen; vecitr += 1 << FPSCR_LENGTH_BIT) {
 		u32 except;
 
-		if (op == FOP_EXT)
+		if (op == FOP_EXT && (inst & FEXT_MASK) == FEXT_FCVT)
+			pr_debug("VFP: itr%d (s%u) = op[%u] (d%u)\n",
+				 vecitr >> FPSCR_LENGTH_BIT,
+				 dest, dn, dm);
+		else if (op == FOP_EXT)
 			pr_debug("VFP: itr%d (d%u) = op[%u] (d%u)\n",
 				 vecitr >> FPSCR_LENGTH_BIT,
-				 dd, dn, dm);
+				 dest, dn, dm);
 		else
 			pr_debug("VFP: itr%d (d%u) = (d%u) op[%u] (d%u)\n",
 				 vecitr >> FPSCR_LENGTH_BIT,
-				 dd, dn, FOP_TO_IDX(op), dm);
+				 dest, dn, FOP_TO_IDX(op), dm);
 
-		except = fop(dd, dn, dm, fpscr);
+		except = fop(dest, dn, dm, fpscr);
 		pr_debug("VFP: itr%d: exceptions=%08x\n",
 			 vecitr >> FPSCR_LENGTH_BIT, except);
 
@@ -1180,7 +1194,7 @@ u32 vfp_double_cpdo(u32 inst, u32 fpscr)
 		 * we encounter an exception.  We continue.
 		 */
 
-		dd = FREG_BANK(dd) + ((FREG_IDX(dd) + vecstride) & 6);
+		dest = FREG_BANK(dest) + ((FREG_IDX(dest) + vecstride) & 6);
 		dn = FREG_BANK(dn) + ((FREG_IDX(dn) + vecstride) & 6);
 		if (FREG_BANK(dm) != 0)
 			dm = FREG_BANK(dm) + ((FREG_IDX(dm) + vecstride) & 6);

arch/arm/vfp/vfphw.S

@@ -178,12 +178,12 @@ vfp_get_float:
 
 	.globl	vfp_put_float
 vfp_put_float:
-	add	pc, pc, r0, lsl #3
+	add	pc, pc, r1, lsl #3
 	mov	r0, r0
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	mcr	p10, 0, r1, c\dr, c0, 0	@ fmsr	r0, s0
+	mcr	p10, 0, r0, c\dr, c0, 0	@ fmsr	r0, s0
 	mov	pc, lr
-	mcr	p10, 0, r1, c\dr, c0, 4	@ fmsr	r0, s1
+	mcr	p10, 0, r0, c\dr, c0, 4	@ fmsr	r0, s1
 	mov	pc, lr
 	.endr
 
@@ -203,9 +203,9 @@ vfp_get_double:
 
 	.globl	vfp_put_double
 vfp_put_double:
-	add	pc, pc, r0, lsl #3
+	add	pc, pc, r2, lsl #3
 	mov	r0, r0
 	.irp	dr,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15
-	fmdrr	d\dr, r1, r2
+	fmdrr	d\dr, r0, r1
 	mov	pc, lr
 	.endr

arch/arm/vfp/vfpmodule.c

@@ -131,7 +131,7 @@ static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_
 
 	pr_debug("VFP: raising exceptions %08x\n", exceptions);
 
-	if (exceptions == (u32)-1) {
+	if (exceptions == VFP_EXCEPTION_ERROR) {
 		vfp_panic("unhandled bounce");
 		vfp_raise_sigfpe(0, regs);
 		return;
@@ -170,7 +170,7 @@ static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_
  */
 static u32 vfp_emulate_instruction(u32 inst, u32 fpscr, struct pt_regs *regs)
 {
-	u32 exceptions = (u32)-1;
+	u32 exceptions = VFP_EXCEPTION_ERROR;
 
 	pr_debug("VFP: emulate: INST=0x%08x SCR=0x%08x\n", inst, fpscr);
 

arch/arm/vfp/vfpsingle.c

@@ -200,7 +200,7 @@ u32 vfp_single_normaliseround(int sd, struct vfp_single *vs, u32 fpscr, u32 exce
 		s32 d = vfp_single_pack(vs);
 		pr_debug("VFP: %s: d(s%d)=%08x exceptions=%08x\n", func,
 			 sd, d, exceptions);
-		vfp_put_float(sd, d);
+		vfp_put_float(d, sd);
 	}
 
 	return exceptions;
@@ -257,19 +257,19 @@ vfp_propagate_nan(struct vfp_single *vsd, struct vfp_single *vsn,
  */
 static u32 vfp_single_fabs(int sd, int unused, s32 m, u32 fpscr)
 {
-	vfp_put_float(sd, vfp_single_packed_abs(m));
+	vfp_put_float(vfp_single_packed_abs(m), sd);
 	return 0;
 }
 
 static u32 vfp_single_fcpy(int sd, int unused, s32 m, u32 fpscr)
 {
-	vfp_put_float(sd, m);
+	vfp_put_float(m, sd);
 	return 0;
 }
 
 static u32 vfp_single_fneg(int sd, int unused, s32 m, u32 fpscr)
 {
-	vfp_put_float(sd, vfp_single_packed_negate(m));
+	vfp_put_float(vfp_single_packed_negate(m), sd);
 	return 0;
 }
 
@@ -333,7 +333,7 @@ static u32 vfp_single_fsqrt(int sd, int unused, s32 m, u32 fpscr)
 			vsp = &vfp_single_default_qnan;
 			ret = FPSCR_IOC;
 		}
-		vfp_put_float(sd, vfp_single_pack(vsp));
+		vfp_put_float(vfp_single_pack(vsp), sd);
 		return ret;
 	}
 
@@ -506,7 +506,7 @@ static u32 vfp_single_fcvtd(int dd, int unused, s32 m, u32 fpscr)
 	 */
 	if (tm & (VFP_INFINITY|VFP_NAN)) {
 		vdd.exponent = 2047;
-		if (tm & VFP_NAN)
+		if (tm == VFP_QNAN)
 			vdd.significand |= VFP_DOUBLE_SIGNIFICAND_QNAN;
 		goto pack_nan;
 	} else if (tm & VFP_ZERO)
@@ -514,14 +514,10 @@ static u32 vfp_single_fcvtd(int dd, int unused, s32 m, u32 fpscr)
 	else
 		vdd.exponent = vsm.exponent + (1023 - 127);
 
-	/*
-	 * Technically, if bit 0 of dd is set, this is an invalid
-	 * instruction.  However, we ignore this for efficiency.
-	 */
 	return vfp_double_normaliseround(dd, &vdd, fpscr, exceptions, "fcvtd");
 
  pack_nan:
-	vfp_put_double(dd, vfp_double_pack(&vdd));
+	vfp_put_double(vfp_double_pack(&vdd), dd);
 	return exceptions;
 }
 
@@ -617,7 +613,7 @@ static u32 vfp_single_ftoui(int sd, int unused, s32 m, u32 fpscr)
 
 	pr_debug("VFP: ftoui: d(s%d)=%08x exceptions=%08x\n", sd, d, exceptions);
 
-	vfp_put_float(sd, d);
+	vfp_put_float(d, sd);
 
 	return exceptions;
 }
@@ -696,7 +692,7 @@ static u32 vfp_single_ftosi(int sd, int unused, s32 m, u32 fpscr)
 
 	pr_debug("VFP: ftosi: d(s%d)=%08x exceptions=%08x\n", sd, d, exceptions);
 
-	vfp_put_float(sd, (s32)d);
+	vfp_put_float((s32)d, sd);
 
 	return exceptions;
 }
@@ -1131,7 +1127,7 @@ static u32 vfp_single_fdiv(int sd, int sn, s32 m, u32 fpscr)
  vsn_nan:
 	exceptions = vfp_propagate_nan(&vsd, &vsn, &vsm, fpscr);
  pack:
-	vfp_put_float(sd, vfp_single_pack(&vsd));
+	vfp_put_float(vfp_single_pack(&vsd), sd);
 	return exceptions;
 
  vsm_nan:
@@ -1151,7 +1147,7 @@ static u32 vfp_single_fdiv(int sd, int sn, s32 m, u32 fpscr)
 	goto pack;
 
  invalid:
-	vfp_put_float(sd, vfp_single_pack(&vfp_single_default_qnan));
+	vfp_put_float(vfp_single_pack(&vfp_single_default_qnan), sd);
 	return FPSCR_IOC;
 }
 
@@ -1174,7 +1170,7 @@ u32 vfp_single_cpdo(u32 inst, u32 fpscr)
 {
 	u32 op = inst & FOP_MASK;
 	u32 exceptions = 0;
-	unsigned int sd = vfp_get_sd(inst);
+	unsigned int dest;
 	unsigned int sn = vfp_get_sn(inst);
 	unsigned int sm = vfp_get_sm(inst);
 	unsigned int vecitr, veclen, vecstride;
@@ -1183,11 +1179,23 @@ u32 vfp_single_cpdo(u32 inst, u32 fpscr)
 	veclen = fpscr & FPSCR_LENGTH_MASK;
 	vecstride = 1 + ((fpscr & FPSCR_STRIDE_MASK) == FPSCR_STRIDE_MASK);
 
+	/*
+	 * fcvtsd takes a dN register number as destination, not sN.
+	 * Technically, if bit 0 of dd is set, this is an invalid
+	 * instruction.  However, we ignore this for efficiency.
+	 * It also only operates on scalars.
+	 */
+	if ((inst & FEXT_MASK) == FEXT_FCVT) {
+		veclen = 0;
+		dest = vfp_get_dd(inst);
+	} else
+		dest = vfp_get_sd(inst);
+
 	/*
 	 * If destination bank is zero, vector length is always '1'.
 	 * ARM DDI0100F C5.1.3, C5.3.2.
 	 */
-	if (FREG_BANK(sd) == 0)
+	if (FREG_BANK(dest) == 0)
 		veclen = 0;
 
 	pr_debug("VFP: vecstride=%u veclen=%u\n", vecstride,
@@ -1201,15 +1209,18 @@ u32 vfp_single_cpdo(u32 inst, u32 fpscr)
 		s32 m = vfp_get_float(sm);
 		u32 except;
 
-		if (op == FOP_EXT)
+		if (op == FOP_EXT && (inst & FEXT_MASK) == FEXT_FCVT)
+			pr_debug("VFP: itr%d (d%u) = op[%u] (s%u=%08x)\n",
+				 vecitr >> FPSCR_LENGTH_BIT, dest, sn, sm, m);
+		else if (op == FOP_EXT)
 			pr_debug("VFP: itr%d (s%u) = op[%u] (s%u=%08x)\n",
-				 vecitr >> FPSCR_LENGTH_BIT, sd, sn, sm, m);
+				 vecitr >> FPSCR_LENGTH_BIT, dest, sn, sm, m);
 		else
 			pr_debug("VFP: itr%d (s%u) = (s%u) op[%u] (s%u=%08x)\n",
-				 vecitr >> FPSCR_LENGTH_BIT, sd, sn,
+				 vecitr >> FPSCR_LENGTH_BIT, dest, sn,
 				 FOP_TO_IDX(op), sm, m);
 
-		except = fop(sd, sn, m, fpscr);
+		except = fop(dest, sn, m, fpscr);
 		pr_debug("VFP: itr%d: exceptions=%08x\n",
 			 vecitr >> FPSCR_LENGTH_BIT, except);
 
@@ -1227,7 +1238,7 @@ u32 vfp_single_cpdo(u32 inst, u32 fpscr)
 		 * we encounter an exception.  We continue.
 		 */
 
-		sd = FREG_BANK(sd) + ((FREG_IDX(sd) + vecstride) & 7);
+		dest = FREG_BANK(dest) + ((FREG_IDX(dest) + vecstride) & 7);
 		sn = FREG_BANK(sn) + ((FREG_IDX(sn) + vecstride) & 7);
 		if (FREG_BANK(sm) != 0)
 			sm = FREG_BANK(sm) + ((FREG_IDX(sm) + vecstride) & 7);

arch/frv/Kconfig

@@ -29,6 +29,10 @@ config GENERIC_HARDIRQS
 	bool
 	default n
 
+config GENERIC_TIME
+	bool
+	default y
+
 config TIME_LOW_RES
 	bool
 	default y

arch/frv/kernel/time.c

@@ -32,8 +32,6 @@
 
 #define TICK_SIZE (tick_nsec / 1000)
 
-extern unsigned long wall_jiffies;
-
 unsigned long __nongprelbss __clkin_clock_speed_HZ;
 unsigned long __nongprelbss __ext_bus_clock_speed_HZ;
 unsigned long __nongprelbss __res_bus_clock_speed_HZ;
@@ -144,85 +142,6 @@ void time_init(void)
 	time_divisor_init();
 }
 
-/*
- * This version of gettimeofday has near microsecond resolution.
- */
-void do_gettimeofday(struct timeval *tv)
-{
-	unsigned long seq;
-	unsigned long usec, sec;
-	unsigned long max_ntp_tick;
-
-	do {
-		unsigned long lost;
-
-		seq = read_seqbegin(&xtime_lock);
-
-		usec = 0;
-		lost = jiffies - wall_jiffies;
-
-		/*
-		 * If time_adjust is negative then NTP is slowing the clock
-		 * so make sure not to go into next possible interval.
-		 * Better to lose some accuracy than have time go backwards..
-		 */
-		if (unlikely(time_adjust < 0)) {
-			max_ntp_tick = (USEC_PER_SEC / HZ) - tickadj;
-			usec = min(usec, max_ntp_tick);
-
-			if (lost)
-				usec += lost * max_ntp_tick;
-		}
-		else if (unlikely(lost))
-			usec += lost * (USEC_PER_SEC / HZ);
-
-		sec = xtime.tv_sec;
-		usec += (xtime.tv_nsec / 1000);
-	} while (read_seqretry(&xtime_lock, seq));
-
-	while (usec >= 1000000) {
-		usec -= 1000000;
-		sec++;
-	}
-
-	tv->tv_sec = sec;
-	tv->tv_usec = usec;
-}
-
-EXPORT_SYMBOL(do_gettimeofday);
-
-int do_settimeofday(struct timespec *tv)
-{
-	time_t wtm_sec, sec = tv->tv_sec;
-	long wtm_nsec, nsec = tv->tv_nsec;
-
-	if ((unsigned long)tv->tv_nsec >= NSEC_PER_SEC)
-		return -EINVAL;
-
-	write_seqlock_irq(&xtime_lock);
-	/*
-	 * This is revolting. We need to set "xtime" correctly. However, the
-	 * value in this location is the value at the most recent update of
-	 * wall time.  Discover what correction gettimeofday() would have
-	 * made, and then undo it!
-	 */
-	nsec -= 0 * NSEC_PER_USEC;
-	nsec -= (jiffies - wall_jiffies) * TICK_NSEC;
-
-	wtm_sec  = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec);
-	wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec);
-
-	set_normalized_timespec(&xtime, sec, nsec);
-	set_normalized_timespec(&wall_to_monotonic, wtm_sec, wtm_nsec);
-
-	ntp_clear();
-	write_sequnlock_irq(&xtime_lock);
-	clock_was_set();
-	return 0;
-}
-
-EXPORT_SYMBOL(do_settimeofday);
-
 /*
  * Scheduler clock - returns current time in nanosec units.
  */

arch/i386/kernel/Makefile

@@ -39,7 +39,6 @@ obj-$(CONFIG_VM86)		+= vm86.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 obj-$(CONFIG_HPET_TIMER) 	+= hpet.o
 obj-$(CONFIG_K8_NB)		+= k8.o
-obj-$(CONFIG_AUDIT)		+= audit.o
 
 EXTRA_AFLAGS   := -traditional
 

arch/i386/kernel/audit.c

@@ -1,23 +0,0 @@
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/audit.h>
-#include <asm/unistd.h>
-
-static unsigned dir_class[] = {
-#include <asm-generic/audit_dir_write.h>
-~0U
-};
-
-static unsigned chattr_class[] = {
-#include <asm-generic/audit_change_attr.h>
-~0U
-};
-
-static int __init audit_classes_init(void)
-{
-	audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
-	audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
-	return 0;
-}
-
-__initcall(audit_classes_init);

arch/i386/kernel/entry.S

@@ -209,6 +209,10 @@ ENTRY(ret_from_fork)
 	GET_THREAD_INFO(%ebp)
 	popl %eax
 	CFI_ADJUST_CFA_OFFSET -4
+	pushl $0x0202			# Reset kernel eflags
+	CFI_ADJUST_CFA_OFFSET 4
+	popfl
+	CFI_ADJUST_CFA_OFFSET -4
 	jmp syscall_exit
 	CFI_ENDPROC
 

arch/i386/kernel/head.S

@@ -317,20 +317,14 @@ is386:	movl $2,%ecx		# set MP
 	movl %eax,%gs
 	lldt %ax
 	cld			# gcc2 wants the direction flag cleared at all times
+	pushl %eax		# fake return address
 #ifdef CONFIG_SMP
 	movb ready, %cl
 	movb $1, ready
-	cmpb $0,%cl
-	je 1f			# the first CPU calls start_kernel
-				# all other CPUs call initialize_secondary
-	call initialize_secondary
-	jmp L6
-1:
+	cmpb $0,%cl		# the first CPU calls start_kernel
+	jne initialize_secondary # all other CPUs call initialize_secondary
 #endif /* CONFIG_SMP */
-	call start_kernel
-L6:
-	jmp L6			# main should never return here, but
-				# just in case, we know what happens.
+	jmp start_kernel
 
 /*
  * We depend on ET to be correct. This checks for 287/387.

arch/i386/kernel/hpet.c

@@ -35,7 +35,7 @@ static int __init init_hpet_clocksource(void)
 	void __iomem* hpet_base;
 	u64 tmp;
 
-	if (!hpet_address)
+	if (!is_hpet_enabled())
 		return -ENODEV;
 
 	/* calculate the hpet address: */

arch/i386/kernel/irq.c

@@ -82,10 +82,6 @@ fastcall unsigned int do_IRQ(struct pt_regs *regs)
 	}
 #endif
 
-	if (!irq_desc[irq].handle_irq) {
-		__do_IRQ(irq, regs);
-		goto out_exit;
-	}
 #ifdef CONFIG_4KSTACKS
 
 	curctx = (union irq_ctx *) current_thread_info();
@@ -125,7 +121,6 @@ fastcall unsigned int do_IRQ(struct pt_regs *regs)
 #endif
 		__do_IRQ(irq, regs);
 
-out_exit:
 	irq_exit();
 
 	return 1;

arch/i386/kernel/traps.c

@@ -92,7 +92,11 @@ asmlinkage void spurious_interrupt_bug(void);
 asmlinkage void machine_check(void);
 
 static int kstack_depth_to_print = 24;
+#ifdef CONFIG_STACK_UNWIND
 static int call_trace = 1;
+#else
+#define call_trace (-1)
+#endif
 ATOMIC_NOTIFIER_HEAD(i386die_chain);
 
 int register_die_notifier(struct notifier_block *nb)
@@ -187,22 +191,21 @@ static void show_trace_log_lvl(struct task_struct *task, struct pt_regs *regs,
 			if (unwind_init_blocked(&info, task) == 0)
 				unw_ret = show_trace_unwind(&info, log_lvl);
 		}
-		if (unw_ret > 0 && !arch_unw_user_mode(&info)) {
-#ifdef CONFIG_STACK_UNWIND
-			print_symbol("DWARF2 unwinder stuck at %s\n",
-				     UNW_PC(&info));
-			if (call_trace == 1) {
-				printk("Leftover inexact backtrace:\n");
-				if (UNW_SP(&info))
+		if (unw_ret > 0) {
+			if (call_trace == 1 && !arch_unw_user_mode(&info)) {
+				print_symbol("DWARF2 unwinder stuck at %s\n",
+					     UNW_PC(&info));
+				if (UNW_SP(&info) >= PAGE_OFFSET) {
+					printk("Leftover inexact backtrace:\n");
 					stack = (void *)UNW_SP(&info);
-			} else if (call_trace > 1)
+				} else
+					printk("Full inexact backtrace again:\n");
+			} else if (call_trace >= 1)
 				return;
 			else
 				printk("Full inexact backtrace again:\n");
-#else
+		} else
 			printk("Inexact backtrace:\n");
-#endif
-		}
 	}
 
 	if (task == current) {
@@ -1241,6 +1244,7 @@ static int __init kstack_setup(char *s)
 }
 __setup("kstack=", kstack_setup);
 
+#ifdef CONFIG_STACK_UNWIND
 static int __init call_trace_setup(char *s)
 {
 	if (strcmp(s, "old") == 0)
@@ -1254,3 +1258,4 @@ static int __init call_trace_setup(char *s)
 	return 1;
 }
 __setup("call_trace=", call_trace_setup);
+#endif

arch/i386/oprofile/nmi_int.c

@@ -337,6 +337,8 @@ static int __init ppro_init(char ** cpu_type)
 
 	if (cpu_model == 14)
 		*cpu_type = "i386/core";
+	else if (cpu_model == 15)
+		*cpu_type = "i386/core_2";
 	else if (cpu_model > 0xd)
 		return 0;
 	else if (cpu_model == 9) {

arch/ia64/Kconfig

@@ -75,6 +75,10 @@ config DMA_IS_NORMAL
 	depends on IA64_SGI_SN2
 	default y
 
+config AUDIT_ARCH
+	bool
+	default y
+
 choice
 	prompt "System type"
 	default IA64_GENERIC
@@ -258,7 +262,7 @@ config NR_CPUS
 	int "Maximum number of CPUs (2-1024)"
 	range 2 1024
 	depends on SMP
-	default "64"
+	default "1024"
 	help
 	  You should set this to the number of CPUs in your system, but
 	  keep in mind that a kernel compiled for, e.g., 2 CPUs will boot but
@@ -354,7 +358,7 @@ config NUMA
 config NODES_SHIFT
 	int "Max num nodes shift(3-10)"
 	range 3 10
-	default "8"
+	default "10"
 	depends on NEED_MULTIPLE_NODES
 	help
 	  This option specifies the maximum number of nodes in your SSI system.

arch/ia64/ia32/audit.c

@@ -9,3 +9,29 @@ unsigned ia32_chattr_class[] = {
 #include <asm-generic/audit_change_attr.h>
 ~0U
 };
+
+unsigned ia32_write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
+unsigned ia32_read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+int ia32_classify_syscall(unsigned syscall)
+{
+	switch(syscall) {
+	case __NR_open:
+		return 2;
+	case __NR_openat:
+		return 3;
+	case __NR_socketcall:
+		return 4;
+	case __NR_execve:
+		return 5;
+	default:
+		return 1;
+	}
+}

arch/ia64/kernel/audit.c

@@ -8,19 +8,54 @@ static unsigned dir_class[] = {
 ~0U
 };
 
+static unsigned read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+static unsigned write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
 static unsigned chattr_class[] = {
 #include <asm-generic/audit_change_attr.h>
 ~0U
 };
 
+int audit_classify_syscall(int abi, unsigned syscall)
+{
+#ifdef CONFIG_IA32_SUPPORT
+	extern int ia32_classify_syscall(unsigned);
+	if (abi == AUDIT_ARCH_I386)
+		return ia32_classify_syscall(syscall);
+#endif
+	switch(syscall) {
+	case __NR_open:
+		return 2;
+	case __NR_openat:
+		return 3;
+	case __NR_execve:
+		return 5;
+	default:
+		return 0;
+	}
+}
+
 static int __init audit_classes_init(void)
 {
 #ifdef CONFIG_IA32_SUPPORT
 	extern __u32 ia32_dir_class[];
+	extern __u32 ia32_write_class[];
+	extern __u32 ia32_read_class[];
 	extern __u32 ia32_chattr_class[];
+	audit_register_class(AUDIT_CLASS_WRITE_32, ia32_write_class);
+	audit_register_class(AUDIT_CLASS_READ_32, ia32_read_class);
 	audit_register_class(AUDIT_CLASS_DIR_WRITE_32, ia32_dir_class);
 	audit_register_class(AUDIT_CLASS_CHATTR_32, ia32_chattr_class);
 #endif
+	audit_register_class(AUDIT_CLASS_WRITE, write_class);
+	audit_register_class(AUDIT_CLASS_READ, read_class);
 	audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
 	audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
 	return 0;

arch/ia64/kernel/entry.S

@@ -1605,8 +1605,8 @@ sys_call_table:
 	data8 sys_ni_syscall			// 1295 reserved for ppoll
 	data8 sys_unshare
 	data8 sys_splice
-	data8 sys_set_robust_list
-	data8 sys_get_robust_list
+	data8 sys_ni_syscall			// reserved for set_robust_list
+	data8 sys_ni_syscall			// reserved for get_robust_list
 	data8 sys_sync_file_range		// 1300
 	data8 sys_tee
 	data8 sys_vmsplice

arch/ia64/kernel/head.S

@@ -197,6 +197,11 @@ start_ap:
 	;;
 	srlz.i
 	;;
+ {
+	flushrs				// must be first insn in group
+	srlz.i
+ }
+	;;
 	/*
 	 * Save the region registers, predicate before they get clobbered
 	 */

arch/ia64/kernel/perfmon.c

@@ -4936,13 +4936,15 @@ abort_locked:
 	if (likely(ctx)) {
 		DPRINT(("context unlocked\n"));
 		UNPROTECT_CTX(ctx, flags);
-		fput(file);
 	}
 
 	/* copy argument back to user, if needed */
 	if (call_made && PFM_CMD_RW_ARG(cmd) && copy_to_user(arg, args_k, base_sz*count)) ret = -EFAULT;
 
 error_args:
+	if (file)
+		fput(file);
+
 	kfree(args_k);
 
 	DPRINT(("cmd=%s ret=%ld\n", PFM_CMD_NAME(cmd), ret));

arch/ia64/kernel/sys_ia64.c

@@ -163,10 +163,25 @@ sys_pipe (void)
 	return retval;
 }
 
+int ia64_mmap_check(unsigned long addr, unsigned long len,
+		unsigned long flags)
+{
+	unsigned long roff;
+
+	/*
+	 * Don't permit mappings into unmapped space, the virtual page table
+	 * of a region, or across a region boundary.  Note: RGN_MAP_LIMIT is
+	 * equal to 2^n-PAGE_SIZE (for some integer n <= 61) and len > 0.
+	 */
+	roff = REGION_OFFSET(addr);
+	if ((len > RGN_MAP_LIMIT) || (roff > (RGN_MAP_LIMIT - len)))
+		return -EINVAL;
+	return 0;
+}
+
 static inline unsigned long
 do_mmap2 (unsigned long addr, unsigned long len, int prot, int flags, int fd, unsigned long pgoff)
 {
-	unsigned long roff;
 	struct file *file = NULL;
 
 	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
@@ -188,17 +203,6 @@ do_mmap2 (unsigned long addr, unsigned long len, int prot, int flags, int fd, un
 		goto out;
 	}
 
-	/*
-	 * Don't permit mappings into unmapped space, the virtual page table of a region,
-	 * or across a region boundary.  Note: RGN_MAP_LIMIT is equal to 2^n-PAGE_SIZE
-	 * (for some integer n <= 61) and len > 0.
-	 */
-	roff = REGION_OFFSET(addr);
-	if ((len > RGN_MAP_LIMIT) || (roff > (RGN_MAP_LIMIT - len))) {
-		addr = -EINVAL;
-		goto out;
-	}
-
 	down_write(&current->mm->mmap_sem);
 	addr = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
 	up_write(&current->mm->mmap_sem);

arch/ia64/kernel/topology.c

@@ -67,10 +67,8 @@ static int __init topology_init(void)
 #endif
 
 	sysfs_cpus = kzalloc(sizeof(struct ia64_cpu) * NR_CPUS, GFP_KERNEL);
-	if (!sysfs_cpus) {
-		err = -ENOMEM;
-		goto out;
-	}
+	if (!sysfs_cpus)
+		panic("kzalloc in topology_init failed - NR_CPUS too big?");
 
 	for_each_present_cpu(i) {
 		if((err = arch_register_cpu(i)))

arch/ia64/sn/kernel/setup.c

@@ -565,7 +565,7 @@ static void __init sn_init_pdas(char **cmdline_p)
  * Also sets up a few fields in the nodepda.  Also known as
  * platform_cpu_init() by the ia64 machvec code.
  */
-void __init sn_cpu_init(void)
+void __cpuinit sn_cpu_init(void)
 {
 	int cpuid;
 	int cpuphyid;

arch/ia64/sn/kernel/xpc_channel.c

@@ -279,8 +279,8 @@ xpc_pull_remote_cachelines(struct xpc_partition *part, void *dst,
 		return part->reason;
 	}
 
-	bte_ret = xp_bte_copy((u64) src, (u64) ia64_tpa((u64) dst),
-				(u64) cnt, (BTE_NORMAL | BTE_WACQUIRE), NULL);
+	bte_ret = xp_bte_copy((u64) src, (u64) dst, (u64) cnt,
+					(BTE_NORMAL | BTE_WACQUIRE), NULL);
 	if (bte_ret == BTE_SUCCESS) {
 		return xpcSuccess;
 	}

arch/ia64/sn/kernel/xpc_main.c

@@ -1052,6 +1052,8 @@ xpc_do_exit(enum xpc_retval reason)
 	if (xpc_sysctl) {
 		unregister_sysctl_table(xpc_sysctl);
 	}
+
+	kfree(xpc_remote_copy_buffer_base);
 }
 
 
@@ -1212,24 +1214,20 @@ xpc_init(void)
 	partid_t partid;
 	struct xpc_partition *part;
 	pid_t pid;
+	size_t buf_size;
 
 
 	if (!ia64_platform_is("sn2")) {
 		return -ENODEV;
 	}
 
-	/*
-	 * xpc_remote_copy_buffer is used as a temporary buffer for bte_copy'ng
-	 * various portions of a partition's reserved page. Its size is based
-	 * on the size of the reserved page header and part_nasids mask. So we
-	 * need to ensure that the other items will fit as well.
-	 */
-	if (XPC_RP_VARS_SIZE > XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES) {
-		dev_err(xpc_part, "xpc_remote_copy_buffer is not big enough\n");
-		return -EPERM;
-	}
-	DBUG_ON((u64) xpc_remote_copy_buffer !=
-				L1_CACHE_ALIGN((u64) xpc_remote_copy_buffer));
+
+	buf_size = max(XPC_RP_VARS_SIZE,
+				XPC_RP_HEADER_SIZE + XP_NASID_MASK_BYTES);
+	xpc_remote_copy_buffer = xpc_kmalloc_cacheline_aligned(buf_size,
+				     GFP_KERNEL, &xpc_remote_copy_buffer_base);
+	if (xpc_remote_copy_buffer == NULL)
+		return -ENOMEM;
 
 	snprintf(xpc_part->bus_id, BUS_ID_SIZE, "part");
 	snprintf(xpc_chan->bus_id, BUS_ID_SIZE, "chan");
@@ -1293,6 +1291,8 @@ xpc_init(void)
 		if (xpc_sysctl) {
 			unregister_sysctl_table(xpc_sysctl);
 		}
+
+		kfree(xpc_remote_copy_buffer_base);
 		return -EBUSY;
 	}
 
@@ -1311,6 +1311,8 @@ xpc_init(void)
 		if (xpc_sysctl) {
 			unregister_sysctl_table(xpc_sysctl);
 		}
+
+		kfree(xpc_remote_copy_buffer_base);
 		return -EBUSY;
 	}
 
@@ -1362,6 +1364,8 @@ xpc_init(void)
 		if (xpc_sysctl) {
 			unregister_sysctl_table(xpc_sysctl);
 		}
+
+		kfree(xpc_remote_copy_buffer_base);
 		return -EBUSY;
 	}
 

arch/ia64/sn/kernel/xpc_partition.c

@@ -71,19 +71,15 @@ struct xpc_partition xpc_partitions[XP_MAX_PARTITIONS + 1];
  * Generic buffer used to store a local copy of portions of a remote
  * partition's reserved page (either its header and part_nasids mask,
  * or its vars).
- *
- * xpc_discovery runs only once and is a seperate thread that is
- * very likely going to be processing in parallel with receiving
- * interrupts.
  */
-char ____cacheline_aligned xpc_remote_copy_buffer[XPC_RP_HEADER_SIZE +
-							XP_NASID_MASK_BYTES];
+char *xpc_remote_copy_buffer;
+void *xpc_remote_copy_buffer_base;
 
 
 /*
  * Guarantee that the kmalloc'd memory is cacheline aligned.
  */
-static void *
+void *
 xpc_kmalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
 {
 	/* see if kmalloc will give us cachline aligned memory by default */
@@ -148,7 +144,7 @@ xpc_get_rsvd_page_pa(int nasid)
 			}
 		}
 
-		bte_res = xp_bte_copy(rp_pa, ia64_tpa(buf), buf_len,
+		bte_res = xp_bte_copy(rp_pa, buf, buf_len,
 					(BTE_NOTIFY | BTE_WACQUIRE), NULL);
 		if (bte_res != BTE_SUCCESS) {
 			dev_dbg(xpc_part, "xp_bte_copy failed %i\n", bte_res);
@@ -447,7 +443,7 @@ xpc_check_remote_hb(void)
 
 		/* pull the remote_hb cache line */
 		bres = xp_bte_copy(part->remote_vars_pa,
-					ia64_tpa((u64) remote_vars),
+					(u64) remote_vars,
 					XPC_RP_VARS_SIZE,
 					(BTE_NOTIFY | BTE_WACQUIRE), NULL);
 		if (bres != BTE_SUCCESS) {
@@ -498,8 +494,7 @@ xpc_get_remote_rp(int nasid, u64 *discovered_nasids,
 
 
 	/* pull over the reserved page header and part_nasids mask */
-
-	bres = xp_bte_copy(*remote_rp_pa, ia64_tpa((u64) remote_rp),
+	bres = xp_bte_copy(*remote_rp_pa, (u64) remote_rp,
 				XPC_RP_HEADER_SIZE + xp_nasid_mask_bytes,
 				(BTE_NOTIFY | BTE_WACQUIRE), NULL);
 	if (bres != BTE_SUCCESS) {
@@ -554,11 +549,8 @@ xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars)
 		return xpcVarsNotSet;
 	}
 
-
 	/* pull over the cross partition variables */
-
-	bres = xp_bte_copy(remote_vars_pa, ia64_tpa((u64) remote_vars),
-				XPC_RP_VARS_SIZE,
+	bres = xp_bte_copy(remote_vars_pa, (u64) remote_vars, XPC_RP_VARS_SIZE,
 				(BTE_NOTIFY | BTE_WACQUIRE), NULL);
 	if (bres != BTE_SUCCESS) {
 		return xpc_map_bte_errors(bres);
@@ -1239,7 +1231,7 @@ xpc_initiate_partid_to_nasids(partid_t partid, void *nasid_mask)
 
 	part_nasid_pa = (u64) XPC_RP_PART_NASIDS(part->remote_rp_pa);
 
-	bte_res = xp_bte_copy(part_nasid_pa, ia64_tpa((u64) nasid_mask),
+	bte_res = xp_bte_copy(part_nasid_pa, (u64) nasid_mask,
 			xp_nasid_mask_bytes, (BTE_NOTIFY | BTE_WACQUIRE), NULL);
 
 	return xpc_map_bte_errors(bte_res);

arch/powerpc/Kconfig

@@ -95,6 +95,10 @@ config GENERIC_TBSYNC
 	default y if PPC32 && SMP
 	default n
 
+config AUDIT_ARCH
+	bool
+	default y
+
 config DEFAULT_UIMAGE
 	bool
 	help
@@ -354,6 +358,7 @@ endchoice
 config PPC_PSERIES
 	depends on PPC_MULTIPLATFORM && PPC64
 	bool "IBM pSeries & new (POWER5-based) iSeries"
+	select MPIC
 	select PPC_I8259
 	select PPC_RTAS
 	select RTAS_ERROR_LOGGING
@@ -363,6 +368,7 @@ config PPC_PSERIES
 config PPC_CHRP
 	bool "Common Hardware Reference Platform (CHRP) based machines"
 	depends on PPC_MULTIPLATFORM && PPC32
+	select MPIC
 	select PPC_I8259
 	select PPC_INDIRECT_PCI
 	select PPC_RTAS
@@ -373,6 +379,7 @@ config PPC_CHRP
 config PPC_PMAC
 	bool "Apple PowerMac based machines"
 	depends on PPC_MULTIPLATFORM
+	select MPIC
 	select PPC_INDIRECT_PCI if PPC32
 	select PPC_MPC106 if PPC32
 	default y
@@ -380,6 +387,7 @@ config PPC_PMAC
 config PPC_PMAC64
 	bool
 	depends on PPC_PMAC && POWER4
+	select MPIC
 	select U3_DART
 	select MPIC_BROKEN_U3
 	select GENERIC_TBSYNC
@@ -389,6 +397,7 @@ config PPC_PMAC64
 config PPC_PREP
 	bool "PowerPC Reference Platform (PReP) based machines"
 	depends on PPC_MULTIPLATFORM && PPC32 && BROKEN
+	select MPIC
 	select PPC_I8259
 	select PPC_INDIRECT_PCI
 	select PPC_UDBG_16550
@@ -397,6 +406,7 @@ config PPC_PREP
 config PPC_MAPLE
 	depends on PPC_MULTIPLATFORM && PPC64
 	bool "Maple 970FX Evaluation Board"
+	select MPIC
 	select U3_DART
 	select MPIC_BROKEN_U3
 	select GENERIC_TBSYNC
@@ -439,12 +449,6 @@ config U3_DART
 	depends on PPC_MULTIPLATFORM && PPC64
 	default n
 
-config MPIC
-	depends on PPC_PSERIES || PPC_PMAC || PPC_MAPLE || PPC_CHRP \
-			       || MPC7448HPC2
-	bool
-	default y
-
 config PPC_RTAS
 	bool
 	default n
@@ -812,6 +816,14 @@ config GENERIC_ISA_DMA
 	depends on PPC64 || POWER4 || 6xx && !CPM2
 	default y
 
+config MPIC
+	bool
+	default n
+
+config MPIC_WEIRD
+	bool
+	default n
+
 config PPC_I8259
 	bool
 	default n

arch/powerpc/boot/dts/mpc7448hpc2.dts

@@ -0,0 +1,190 @@
+/*
+ * MPC7448HPC2 (Taiga) board Device Tree Source
+ *
+ * Copyright 2006 Freescale Semiconductor Inc.
+ * 2006 Roy Zang <Roy Zang at freescale.com>.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+
+/ {
+	model = "mpc7448hpc2";
+	compatible = "mpc74xx";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	linux,phandle = <100>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells =<0>;
+		linux,phandle = <200>;
+				
+		PowerPC,7448@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K bytes
+			i-cache-size = <8000>;		// L1, 32K bytes
+			timebase-frequency = <0>;	// 33 MHz, from uboot
+			clock-frequency = <0>;		// From U-Boot
+			bus-frequency = <0>;		// From U-Boot
+			32-bit;
+			linux,phandle = <201>;
+			linux,boot-cpu;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		linux,phandle = <300>;
+		reg = <00000000 20000000	// DDR2   512M at 0
+		       >;
+	};
+
+  	tsi108@c0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "tsi-bridge";
+		ranges = <00000000 c0000000 00010000>;
+		reg = <c0000000 00010000>;
+		bus-frequency = <0>;
+
+		i2c@7000 {
+			interrupt-parent = <7400>;
+			interrupts = <E 0>;
+			reg = <7000 400>;
+			device_type = "i2c";
+			compatible  = "tsi-i2c";
+		};
+
+		mdio@6000 {
+			device_type = "mdio";
+			compatible = "tsi-ethernet";
+
+			ethernet-phy@6000 {
+				linux,phandle = <6000>;
+				interrupt-parent = <7400>;
+				interrupts = <2 1>;
+				reg = <6000 50>;
+				phy-id = <8>;
+				device_type = "ethernet-phy";
+			};
+
+			ethernet-phy@6400 {
+				linux,phandle = <6400>;
+				interrupt-parent = <7400>;
+				interrupts = <2 1>;
+				reg = <6000 50>;
+				phy-id = <9>;
+				device_type = "ethernet-phy";
+			};
+
+		};
+
+		ethernet@6200 {
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSI-ETH";
+			compatible = "tsi-ethernet";
+			reg = <6000 200>;
+			address = [ 00 06 D2 00 00 01 ];
+			interrupts = <10 2>;
+			interrupt-parent = <7400>;
+			phy-handle = <6000>;
+		};
+
+		ethernet@6600 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSI-ETH";
+			compatible = "tsi-ethernet";
+			reg = <6400 200>;
+			address = [ 00 06 D2 00 00 02 ];
+			interrupts = <11 2>;
+			interrupt-parent = <7400>;
+			phy-handle = <6400>;
+		};
+
+		serial@7808 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <7808 200>;
+			clock-frequency = <3f6b5a00>;
+			interrupts = <c 0>;
+			interrupt-parent = <7400>;
+		};
+
+		serial@7c08 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <7c08 200>;
+			clock-frequency = <3f6b5a00>;
+			interrupts = <d 0>;
+			interrupt-parent = <7400>;
+		};
+
+	  	pic@7400 {
+			linux,phandle = <7400>;
+			clock-frequency = <0>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <7400 400>;
+			built-in;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+                       	big-endian;
+		};
+		pci@1000 {
+			compatible = "tsi10x";
+			device_type = "pci";
+			linux,phandle = <1000>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <1000 1000>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 e0000000 e0000000 0 1A000000	
+				  01000000 0 00000000 fa000000 0 00010000>;
+			clock-frequency = <7f28154>;
+			interrupt-parent = <7400>;
+			interrupts = <17 2>;
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+
+				/* IDSEL 0x11 */
+				0800 0 0 1 7400 24 0
+				0800 0 0 2 7400 25 0
+				0800 0 0 3 7400 26 0
+				0800 0 0 4 7400 27 0
+
+				/* IDSEL 0x12 */
+				1000 0 0 1 7400 25 0
+				1000 0 0 2 7400 26 0
+				1000 0 0 3 7400 27 0
+				1000 0 0 4 7400 24 0
+
+				/* IDSEL 0x13 */
+				1800 0 0 1 7400 26 0
+				1800 0 0 2 7400 27 0
+				1800 0 0 3 7400 24 0
+				1800 0 0 4 7400 25 0
+
+				/* IDSEL 0x14 */
+				2000 0 0 1 7400 27 0
+				2000 0 0 2 7400 24 0
+				2000 0 0 3 7400 25 0
+				2000 0 0 4 7400 26 0
+				>;
+		};
+	};
+
+};

arch/powerpc/boot/dts/mpc8349emds.dts

@@ -0,0 +1,328 @@
+/*
+ * MPC8349E MDS Device Tree Source
+ *
+ * Copyright 2005, 2006 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/ {
+	model = "MPC8349EMDS";
+	compatible = "MPC834xMDS";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#cpus = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8349@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <20>;	// 32 bytes
+			i-cache-line-size = <20>;	// 32 bytes
+			d-cache-size = <8000>;		// L1, 32K
+			i-cache-size = <8000>;		// L1, 32K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+			32-bit;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <00000000 10000000>;	// 256MB at 0
+	};
+
+	soc8349@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#interrupt-cells = <2>;
+		device_type = "soc";
+		ranges = <0 e0000000 00100000>;
+		reg = <e0000000 00000200>;
+		bus-frequency = <0>;
+
+		wdt@200 {
+			device_type = "watchdog";
+			compatible = "mpc83xx_wdt";
+			reg = <200 100>;
+		};
+
+		i2c@3000 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3000 100>;
+			interrupts = <e 8>;
+			interrupt-parent = <700>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			device_type = "i2c";
+			compatible = "fsl-i2c";
+			reg = <3100 100>;
+			interrupts = <f 8>;
+			interrupt-parent = <700>;
+			dfsrr;
+		};
+
+		spi@7000 {
+			device_type = "spi";
+			compatible = "mpc83xx_spi";
+			reg = <7000 1000>;
+			interrupts = <10 8>;
+			interrupt-parent = <700>;
+			mode = <0>;
+		};
+
+		/* phy type (ULPI or SERIAL) are only types supportted for MPH */
+		/* port = 0 or 1 */
+		usb@22000 {
+			device_type = "usb";
+			compatible = "fsl-usb2-mph";
+			reg = <22000 1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <700>;
+			interrupts = <27 2>;
+			phy_type = "ulpi";
+			port1;
+		};
+		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
+		usb@23000 {
+			device_type = "usb";
+			compatible = "fsl-usb2-dr";
+			reg = <23000 1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupt-parent = <700>;
+			interrupts = <26 2>;
+			phy_type = "ulpi";
+		};
+
+		mdio@24520 {
+			device_type = "mdio";
+			compatible = "gianfar";
+			reg = <24520 20>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			linux,phandle = <24520>;
+			ethernet-phy@0 {
+				linux,phandle = <2452000>;
+				interrupt-parent = <700>;
+				interrupts = <11 2>;
+				reg = <0>;
+				device_type = "ethernet-phy";
+			};
+			ethernet-phy@1 {
+				linux,phandle = <2452001>;
+				interrupt-parent = <700>;
+				interrupts = <12 2>;
+				reg = <1>;
+				device_type = "ethernet-phy";
+			};
+		};
+
+		ethernet@24000 {
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <24000 1000>;
+			address = [ 00 00 00 00 00 00 ];
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <20 8 21 8 22 8>;
+			interrupt-parent = <700>;
+			phy-handle = <2452000>;
+		};
+
+		ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			device_type = "network";
+			model = "TSEC";
+			compatible = "gianfar";
+			reg = <25000 1000>;
+			address = [ 00 00 00 00 00 00 ];
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <23 8 24 8 25 8>;
+			interrupt-parent = <700>;
+			phy-handle = <2452001>;
+		};
+
+		serial@4500 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4500 100>;
+			clock-frequency = <0>;
+			interrupts = <9 8>;
+			interrupt-parent = <700>;
+		};
+
+		serial@4600 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <4600 100>;
+			clock-frequency = <0>;
+			interrupts = <a 8>;
+			interrupt-parent = <700>;
+		};
+
+		pci@8500 {
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+
+					/* IDSEL 0x11 */
+					 8800 0 0 1 700 14 8
+					 8800 0 0 2 700 15 8
+					 8800 0 0 3 700 16 8
+					 8800 0 0 4 700 17 8
+
+					/* IDSEL 0x12 */
+					 9000 0 0 1 700 16 8
+					 9000 0 0 2 700 17 8
+					 9000 0 0 3 700 14 8
+					 9000 0 0 4 700 15 8
+
+					/* IDSEL 0x13 */
+					 9800 0 0 1 700 17 8
+					 9800 0 0 2 700 14 8
+					 9800 0 0 3 700 15 8
+					 9800 0 0 4 700 16 8
+
+					/* IDSEL 0x15 */
+					 a800 0 0 1 700 14 8
+					 a800 0 0 2 700 15 8
+					 a800 0 0 3 700 16 8
+					 a800 0 0 4 700 17 8
+
+					/* IDSEL 0x16 */
+					 b000 0 0 1 700 17 8
+					 b000 0 0 2 700 14 8
+					 b000 0 0 3 700 15 8
+					 b000 0 0 4 700 16 8
+
+					/* IDSEL 0x17 */
+					 b800 0 0 1 700 16 8
+					 b800 0 0 2 700 17 8
+					 b800 0 0 3 700 14 8
+					 b800 0 0 4 700 15 8
+
+					/* IDSEL 0x18 */
+					 b000 0 0 1 700 15 8
+					 b000 0 0 2 700 16 8
+					 b000 0 0 3 700 17 8
+					 b000 0 0 4 700 14 8>;
+			interrupt-parent = <700>;
+			interrupts = <42 8>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 a0000000 a0000000 0 10000000
+				  42000000 0 80000000 80000000 0 10000000
+				  01000000 0 00000000 e2000000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8500 100>;
+			compatible = "83xx";
+			device_type = "pci";
+		};
+
+		pci@8600 {
+			interrupt-map-mask = <f800 0 0 7>;
+			interrupt-map = <
+
+					/* IDSEL 0x11 */
+					 8800 0 0 1 700 14 8
+					 8800 0 0 2 700 15 8
+					 8800 0 0 3 700 16 8
+					 8800 0 0 4 700 17 8
+
+					/* IDSEL 0x12 */
+					 9000 0 0 1 700 16 8
+					 9000 0 0 2 700 17 8
+					 9000 0 0 3 700 14 8
+					 9000 0 0 4 700 15 8
+
+					/* IDSEL 0x13 */
+					 9800 0 0 1 700 17 8
+					 9800 0 0 2 700 14 8
+					 9800 0 0 3 700 15 8
+					 9800 0 0 4 700 16 8
+
+					/* IDSEL 0x15 */
+					 a800 0 0 1 700 14 8
+					 a800 0 0 2 700 15 8
+					 a800 0 0 3 700 16 8
+					 a800 0 0 4 700 17 8
+
+					/* IDSEL 0x16 */
+					 b000 0 0 1 700 17 8
+					 b000 0 0 2 700 14 8
+					 b000 0 0 3 700 15 8
+					 b000 0 0 4 700 16 8
+
+					/* IDSEL 0x17 */
+					 b800 0 0 1 700 16 8
+					 b800 0 0 2 700 17 8
+					 b800 0 0 3 700 14 8
+					 b800 0 0 4 700 15 8
+
+					/* IDSEL 0x18 */
+					 b000 0 0 1 700 15 8
+					 b000 0 0 2 700 16 8
+					 b000 0 0 3 700 17 8
+					 b000 0 0 4 700 14 8>;
+			interrupt-parent = <700>;
+			interrupts = <42 8>;
+			bus-range = <0 0>;
+			ranges = <02000000 0 b0000000 b0000000 0 10000000
+				  42000000 0 90000000 90000000 0 10000000
+				  01000000 0 00000000 e2100000 0 00100000>;
+			clock-frequency = <3f940aa>;
+			#interrupt-cells = <1>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			reg = <8600 100>;
+			compatible = "83xx";
+			device_type = "pci";
+		};
+
+		/* May need to remove if on a part without crypto engine */
+		crypto@30000 {
+			device_type = "crypto";
+			model = "SEC2";
+			compatible = "talitos";
+			reg = <30000 10000>;
+			interrupts = <b 8>;
+			interrupt-parent = <700>;
+			num-channels = <4>;
+			channel-fifo-len = <18>;
+			exec-units-mask = <0000007e>;
+			/* desc mask is for rev2.0,
+			 * we need runtime fixup for >2.0 */
+			descriptor-types-mask = <01010ebf>;
+		};
+
+		/* IPIC
+		 * interrupts cell = <intr #, sense>
+		 * sense values match linux IORESOURCE_IRQ_* defines:
+		 * sense == 8: Level, low assertion
+		 * sense == 2: Edge, high-to-low change
+		 */
+		pic@700 {
+			linux,phandle = <700>;
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <700 100>;
+			built-in;
+			device_type = "ipic";
+		};
+	};
+};

arch/powerpc/configs/cell_defconfig

@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc6
-# Thu Jun 22 15:28:36 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:20:32 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
@@ -35,6 +36,7 @@ CONFIG_PPC_STD_MMU=y
 CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=4
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -52,6 +54,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
@@ -69,10 +72,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -119,7 +124,7 @@ CONFIG_PPC_MULTIPLATFORM=y
 CONFIG_PPC_CELL=y
 CONFIG_PPC_CELL_NATIVE=y
 CONFIG_PPC_IBM_CELL_BLADE=y
-CONFIG_PPC_SYSTEMSIM=y
+CONFIG_UDBG_RTAS_CONSOLE=y
 # CONFIG_U3_DART is not set
 CONFIG_PPC_RTAS=y
 # CONFIG_RTAS_ERROR_LOGGING is not set
@@ -130,6 +135,7 @@ CONFIG_MMIO_NVRAM=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
+# CONFIG_MPIC is not set
 
 #
 # Cell Broadband Engine options
@@ -154,6 +160,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 CONFIG_FORCE_MAX_ZONEORDER=13
 # CONFIG_IOMMU_VMERGE is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
@@ -173,6 +180,7 @@ CONFIG_SPARSEMEM_EXTREME=y
 CONFIG_MEMORY_HOTPLUG=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
+CONFIG_RESOURCES_64BIT=y
 CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
 CONFIG_ARCH_MEMORY_PROBE=y
 # CONFIG_PPC_64K_PAGES is not set
@@ -187,6 +195,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
@@ -235,6 +244,8 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -252,7 +263,10 @@ CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
 CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
 CONFIG_IPV6_TUNNEL=m
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -277,6 +291,7 @@ CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
 # CONFIG_IP_NF_PPTP is not set
 # CONFIG_IP_NF_H323 is not set
+# CONFIG_IP_NF_SIP is not set
 CONFIG_IP_NF_QUEUE=m
 
 #
@@ -336,6 +351,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -372,6 +388,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -449,8 +466,7 @@ CONFIG_MD_LINEAR=m
 CONFIG_MD_RAID0=m
 CONFIG_MD_RAID1=m
 # CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_RAID6 is not set
+# CONFIG_MD_RAID456 is not set
 # CONFIG_MD_MULTIPATH is not set
 # CONFIG_MD_FAULTY is not set
 CONFIG_BLK_DEV_DM=m
@@ -544,6 +560,7 @@ CONFIG_SPIDER_NET=m
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -620,6 +637,7 @@ CONFIG_SERIO_SERPORT=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_COMPUTONE is not set
 # CONFIG_ROCKETPORT is not set
@@ -680,6 +698,7 @@ CONFIG_WATCHDOG_RTAS=y
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
@@ -725,6 +744,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
@@ -761,7 +781,6 @@ CONFIG_I2C_ALGOBIT=y
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -787,6 +806,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
 
 #
@@ -794,6 +814,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -841,6 +862,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_INFINIBAND=y
 CONFIG_INFINIBAND_USER_MAD=m
 CONFIG_INFINIBAND_USER_ACCESS=m
+CONFIG_INFINIBAND_ADDR_TRANS=y
 CONFIG_INFINIBAND_MTHCA=m
 CONFIG_INFINIBAND_MTHCA_DEBUG=y
 CONFIG_INFINIBAND_IPOIB=m
@@ -856,6 +878,19 @@ CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
 #
 # CONFIG_RTC_CLASS is not set
 
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
 #
 # File systems
 #
@@ -877,6 +912,7 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -1034,6 +1070,9 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_PLIST=y
 
 #
 # Instrumentation Support
@@ -1046,14 +1085,19 @@ CONFIG_ZLIB_DEFLATE=m
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=15
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y

arch/powerpc/configs/chrp32_defconfig

@@ -1,13 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17
-# Mon Jul  3 12:08:41 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:22:54 2006
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
@@ -42,6 +43,7 @@ CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=4
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -59,6 +61,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
@@ -76,10 +79,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -126,7 +131,7 @@ CONFIG_PPC_CHRP=y
 # CONFIG_PPC_PMAC is not set
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
-CONFIG_MPIC=y
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_PPC_RTAS=y
 # CONFIG_RTAS_ERROR_LOGGING is not set
 CONFIG_RTAS_PROC=y
@@ -136,6 +141,7 @@ CONFIG_PPC_MPC106=y
 # CONFIG_CPU_FREQ is not set
 # CONFIG_TAU is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_MPIC=y
 
 #
 # Kernel options
@@ -151,6 +157,7 @@ CONFIG_PREEMPT_NONE=y
 CONFIG_PREEMPT_BKL=y
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 # CONFIG_KEXEC is not set
 CONFIG_IRQ_ALL_CPUS=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
@@ -162,6 +169,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -173,6 +181,7 @@ CONFIG_ISA_DMA_API=y
 #
 CONFIG_ISA=y
 CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
 CONFIG_PPC_I8259=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_PCI=y
@@ -366,6 +375,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -622,6 +632,7 @@ CONFIG_8139TOO=y
 # CONFIG_TLAN is not set
 CONFIG_VIA_RHINE=y
 # CONFIG_VIA_RHINE_MMIO is not set
+# CONFIG_VIA_RHINE_NAPI is not set
 
 #
 # Ethernet (1000 Mbit)
@@ -751,6 +762,7 @@ CONFIG_SERIO_LIBPS2=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -783,6 +795,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_NVRAM=y
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -894,12 +907,12 @@ CONFIG_VIDEO_V4L2=y
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 CONFIG_FB_MACMODES=y
-CONFIG_FB_FIRMWARE_EDID=y
 # CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
@@ -1079,7 +1092,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
-# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
@@ -1305,6 +1318,7 @@ CONFIG_ZLIB_INFLATE=m
 CONFIG_ZLIB_DEFLATE=m
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
+CONFIG_PLIST=y
 
 #
 # Instrumentation Support
@@ -1316,14 +1330,19 @@ CONFIG_TEXTSEARCH_KMP=m
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=15
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_INFO is not set

arch/powerpc/configs/g5_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc3
-# Tue Aug  8 09:12:29 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:22:55 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -126,7 +126,6 @@ CONFIG_PPC_PMAC64=y
 # CONFIG_PPC_IBM_CELL_BLADE is not set
 # CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_U3_DART=y
-CONFIG_MPIC=y
 # CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
 CONFIG_MPIC_BROKEN_U3=y
@@ -146,6 +145,7 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y
 # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_PMAC64=y
 # CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_MPIC=y
 
 #
 # Kernel options
@@ -192,6 +192,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
@@ -772,7 +773,6 @@ CONFIG_HW_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_BRIQ_PANEL is not set
 
 #
 # IPMI
@@ -1195,7 +1195,6 @@ CONFIG_USB_MON=y
 CONFIG_USB_SERIAL=m
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 CONFIG_USB_SERIAL_BELKIN=m
 # CONFIG_USB_SERIAL_WHITEHEAT is not set

arch/powerpc/configs/iseries_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc3
-# Tue Aug  8 09:15:46 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:22:57 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -129,6 +129,7 @@ CONFIG_IBMVIO=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
+# CONFIG_MPIC is not set
 
 #
 # Kernel options
@@ -172,6 +173,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
@@ -716,7 +718,6 @@ CONFIG_SERIAL_ICOM=m
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_BRIQ_PANEL is not set
 
 #
 # IPMI

arch/powerpc/configs/maple_defconfig

@@ -1,15 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc6
-# Wed Mar 15 16:19:54 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:24:55 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
@@ -29,8 +32,10 @@ CONFIG_POWER4=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
+CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -48,11 +53,13 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
@@ -64,14 +71,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -82,7 +87,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -91,6 +95,7 @@ CONFIG_STOP_MACHINE=y
 #
 # Block layer
 #
+# CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
 # IO Schedulers
@@ -116,14 +121,18 @@ CONFIG_PPC_MULTIPLATFORM=y
 # CONFIG_PPC_PMAC is not set
 CONFIG_PPC_MAPLE=y
 # CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_U3_DART=y
-CONFIG_MPIC=y
 # CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
 CONFIG_MPIC_BROKEN_U3=y
 # CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_970_NAP=y
 # CONFIG_CPU_FREQ is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_MPIC=y
 
 #
 # Kernel options
@@ -140,6 +149,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
@@ -155,6 +165,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+CONFIG_RESOURCES_64BIT=y
 # CONFIG_PPC_64K_PAGES is not set
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
@@ -167,11 +178,12 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -197,6 +209,8 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -214,12 +228,18 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -274,6 +294,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -310,6 +331,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 # CONFIG_BLK_DEV_INITRD is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -484,6 +506,7 @@ CONFIG_E1000=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -556,6 +579,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -563,6 +587,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -586,7 +611,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
@@ -632,10 +657,10 @@ CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
@@ -654,9 +679,7 @@ CONFIG_I2C_AMD8111=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -671,7 +694,6 @@ CONFIG_I2C_AMD8111=y
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -683,23 +705,22 @@ CONFIG_I2C_AMD8111=y
 # Misc devices
 #
 
-#
-# Multimedia Capabilities Port drivers
-#
-
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
 #
 # CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
 
 #
@@ -707,6 +728,7 @@ CONFIG_I2C_AMD8111=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -718,6 +740,7 @@ CONFIG_DUMMY_CONSOLE=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -735,6 +758,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_SPLIT_ISO=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN is not set
@@ -771,9 +795,7 @@ CONFIG_USB_HIDINPUT=y
 # CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
@@ -786,15 +808,6 @@ CONFIG_USB_HIDINPUT=y
 #
 # CONFIG_USB_MDC800 is not set
 
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
 #
 # USB Network Adapters
 #
@@ -816,7 +829,7 @@ CONFIG_USB_SERIAL=y
 # CONFIG_USB_SERIAL_CONSOLE is not set
 CONFIG_USB_SERIAL_GENERIC=y
 # CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
@@ -824,6 +837,7 @@ CONFIG_USB_SERIAL_GENERIC=y
 CONFIG_USB_SERIAL_CYPRESS_M8=m
 # CONFIG_USB_SERIAL_EMPEG is not set
 # CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
 # CONFIG_USB_SERIAL_VISOR is not set
 # CONFIG_USB_SERIAL_IPAQ is not set
 # CONFIG_USB_SERIAL_IR is not set
@@ -848,12 +862,15 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 # CONFIG_USB_SERIAL_KLSI is not set
 # CONFIG_USB_SERIAL_KOBIL_SCT is not set
 # CONFIG_USB_SERIAL_MCT_U232 is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
 # CONFIG_USB_SERIAL_PL2303 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 CONFIG_USB_SERIAL_TI=m
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
 CONFIG_USB_EZUSB=y
 
@@ -867,10 +884,12 @@ CONFIG_USB_EZUSB=y
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
@@ -889,6 +908,19 @@ CONFIG_USB_EZUSB=y
 #
 # CONFIG_MMC is not set
 
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
 #
 # InfiniBand support
 #
@@ -898,6 +930,24 @@ CONFIG_USB_EZUSB=y
 # EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
 #
 
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
 #
 # File systems
 #
@@ -917,6 +967,7 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -949,7 +1000,6 @@ CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1067,6 +1117,7 @@ CONFIG_CRC_CCITT=y
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
 
 #
 # Instrumentation Support
@@ -1079,14 +1130,20 @@ CONFIG_ZLIB_INFLATE=y
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 CONFIG_DEBUG_SLAB=y
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_SLAB_LEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
@@ -1100,11 +1157,7 @@ CONFIG_XMON=y
 CONFIG_XMON_DEFAULT=y
 # CONFIG_IRQSTACKS is not set
 CONFIG_BOOTX_TEXT=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
 
 #
 # Security options

arch/powerpc/configs/mpc7448_hpc2_defconfig

@@ -1,16 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc4
-# Sat May 27 18:45:55 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:26:55 2006
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
@@ -29,6 +31,7 @@ CONFIG_CLASSIC32=y
 # CONFIG_PPC_82xx is not set
 # CONFIG_PPC_83xx is not set
 # CONFIG_PPC_85xx is not set
+# CONFIG_PPC_86xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_8xx is not set
@@ -39,6 +42,7 @@ CONFIG_PPC_FPU=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_SMP is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -56,6 +60,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
@@ -70,10 +75,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -110,13 +117,16 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_PPC_ISERIES is not set
 CONFIG_EMBEDDED6xx=y
 # CONFIG_APUS is not set
-CONFIG_MPIC=y
+# CONFIG_PPC_CELL is not set
+# CONFIG_PPC_CELL_NATIVE is not set
+# CONFIG_UDBG_RTAS_CONSOLE is not set
 # CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
 # CONFIG_PPC_MPC106 is not set
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_TAU is not set
+# CONFIG_PPC_TODC is not set
 # CONFIG_KATANA is not set
 # CONFIG_WILLOW is not set
 # CONFIG_CPCI690 is not set
@@ -146,6 +156,7 @@ CONFIG_MPC7448HPC2=y
 # CONFIG_EV64360 is not set
 CONFIG_TSI108_BRIDGE=y
 # CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_MPIC=y
 
 #
 # Kernel options
@@ -160,6 +171,7 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -169,10 +181,10 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-# CONFIG_SOFTWARE_SUSPEND is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
 
@@ -180,10 +192,12 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_GENERIC_ISA_DMA=y
+CONFIG_MPIC_WEIRD=y
 # CONFIG_PPC_I8259 is not set
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -221,6 +235,8 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -240,6 +256,8 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -247,6 +265,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -300,6 +319,7 @@ CONFIG_TCP_CONG_BIC=y
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -336,6 +356,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -399,6 +420,7 @@ CONFIG_SCSI_SATA=y
 CONFIG_SCSI_SATA_MV=y
 # CONFIG_SCSI_SATA_NV is not set
 # CONFIG_SCSI_PDC_ADMA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_SATA_QSTOR is not set
 # CONFIG_SCSI_SATA_PROMISE is not set
 # CONFIG_SCSI_SATA_SX4 is not set
@@ -481,6 +503,9 @@ CONFIG_PHYLIB=y
 # CONFIG_QSEMI_PHY is not set
 # CONFIG_LXT_PHY is not set
 # CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -538,7 +563,6 @@ CONFIG_8139TOO=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
-CONFIG_TSI108_ETH=y
 
 #
 # Ethernet (10000 Mbit)
@@ -546,6 +570,7 @@ CONFIG_TSI108_ETH=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -645,6 +670,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -679,13 +705,13 @@ CONFIG_GEN_RTC=y
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
@@ -697,6 +723,7 @@ CONFIG_HWMON=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -706,7 +733,9 @@ CONFIG_HWMON=y
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -762,6 +791,19 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # CONFIG_RTC_CLASS is not set
 
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
 #
 # File systems
 #
@@ -783,6 +825,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -884,6 +927,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
 
 #
 # Instrumentation Support
@@ -895,17 +939,13 @@ CONFIG_CRC32=y
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_FS is not set
 # CONFIG_UNWIND_INFO is not set
 # CONFIG_BOOTX_TEXT is not set
-# CONFIG_SERIAL_TEXT_DEBUG is not set
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
 
 #
 # Security options

arch/powerpc/configs/mpc834x_itx_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17
-# Fri Jun 30 17:53:25 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:28:05 2006
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -60,6 +60,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
@@ -78,6 +79,7 @@ CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -120,6 +122,7 @@ CONFIG_PPC_GEN550=y
 # CONFIG_MPC834x_SYS is not set
 CONFIG_MPC834x_ITX=y
 CONFIG_MPC834x=y
+# CONFIG_MPIC is not set
 
 #
 # Kernel options
@@ -148,7 +151,6 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-# CONFIG_SOFTWARE_SUSPEND is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -156,6 +158,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -401,6 +404,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -561,6 +565,7 @@ CONFIG_PHYLIB=y
 CONFIG_CICADA_PHY=y
 # CONFIG_VITESSE_PHY is not set
 # CONFIG_SMSC_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -905,6 +910,7 @@ CONFIG_VIDEO_V4L2=y
 #
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -1025,7 +1031,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
-# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
@@ -1110,6 +1116,7 @@ CONFIG_RTC_INTF_DEV_UIE_EMUL=y
 # CONFIG_RTC_DRV_X1205 is not set
 CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
@@ -1226,7 +1233,6 @@ CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1279,11 +1285,13 @@ CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_FS is not set

arch/powerpc/configs/mpc834x_mds_defconfig

@@ -1,15 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc6
-# Wed Mar 15 16:19:56 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:28:54 2006
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
@@ -27,17 +30,19 @@ CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_52xx is not set
 # CONFIG_PPC_82xx is not set
 CONFIG_PPC_83xx=y
+# CONFIG_PPC_85xx is not set
+# CONFIG_PPC_86xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_8xx is not set
 # CONFIG_E200 is not set
-# CONFIG_E500 is not set
 CONFIG_6xx=y
 CONFIG_83xx=y
 CONFIG_PPC_FPU=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_SMP is not set
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -55,9 +60,11 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EMBEDDED=y
@@ -67,14 +74,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 # CONFIG_EPOLL is not set
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -85,7 +90,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 # CONFIG_KMOD is not set
@@ -94,6 +98,8 @@ CONFIG_OBSOLETE_MODPARM=y
 # Block layer
 #
 # CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
 
 #
 # IO Schedulers
@@ -114,7 +120,9 @@ CONFIG_PPC_GEN550=y
 # Platform support
 #
 CONFIG_MPC834x_SYS=y
+# CONFIG_MPC834x_ITX is not set
 CONFIG_MPC834x=y
+# CONFIG_MPIC is not set
 
 #
 # Kernel options
@@ -129,6 +137,7 @@ CONFIG_PREEMPT_NONE=y
 # CONFIG_PREEMPT is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -138,10 +147,10 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-# CONFIG_SOFTWARE_SUSPEND is not set
 CONFIG_SECCOMP=y
 CONFIG_ISA_DMA_API=y
 
@@ -149,12 +158,13 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
+# CONFIG_PCIEPORTBUS is not set
 
 #
 # PCCARD (PCMCIA/CardBus) support
@@ -192,6 +202,8 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -209,12 +221,18 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -268,6 +286,7 @@ CONFIG_TCP_CONG_BIC=y
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -304,6 +323,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -371,6 +391,9 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_QSEMI_PHY is not set
 # CONFIG_LXT_PHY is not set
 # CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -433,6 +456,7 @@ CONFIG_GIANFAR=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -507,6 +531,7 @@ CONFIG_INPUT=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -543,6 +568,7 @@ CONFIG_83xx_WDT=y
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -589,10 +615,10 @@ CONFIG_I2C_CHARDEV=y
 # CONFIG_I2C_PIIX4 is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
@@ -611,10 +637,8 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_M41T00 is not set
 # CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -629,13 +653,13 @@ CONFIG_I2C_MPC=y
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -664,10 +688,12 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
@@ -678,14 +704,11 @@ CONFIG_HWMON=y
 # Misc devices
 #
 
-#
-# Multimedia Capabilities Port drivers
-#
-
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -695,7 +718,9 @@ CONFIG_HWMON=y
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -707,6 +732,7 @@ CONFIG_HWMON=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_USB is not set
 
 #
@@ -723,6 +749,19 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 #
 # CONFIG_MMC is not set
 
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
 #
 # InfiniBand support
 #
@@ -732,6 +771,24 @@ CONFIG_USB_ARCH_HAS_OHCI=y
 # EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
 #
 
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
 #
 # File systems
 #
@@ -753,6 +810,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -781,7 +839,6 @@ CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_HUGETLB_PAGE is not set
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -854,6 +911,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
 
 #
 # Instrumentation Support
@@ -865,15 +923,13 @@ CONFIG_CRC32=y
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_DEBUG_FS is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_SERIAL_TEXT_DEBUG is not set
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
 
 #
 # Security options

arch/powerpc/configs/mpc8540_ads_defconfig

@@ -1,16 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16
-# Mon Mar 27 23:37:36 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:29:23 2006
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
@@ -29,6 +31,7 @@ CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_82xx is not set
 # CONFIG_PPC_83xx is not set
 CONFIG_PPC_85xx=y
+# CONFIG_PPC_86xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_8xx is not set
@@ -39,6 +42,7 @@ CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -56,6 +60,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
@@ -71,10 +76,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -103,15 +110,16 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_MPIC=y
 # CONFIG_WANT_EARLY_SERIAL is not set
 
 #
 # Platform support
 #
 CONFIG_MPC8540_ADS=y
+# CONFIG_MPC85xx_CDS is not set
 CONFIG_MPC8540=y
 CONFIG_PPC_INDIRECT_PCI_BE=y
+CONFIG_MPIC=y
 
 #
 # Kernel options
@@ -127,6 +135,7 @@ CONFIG_PREEMPT_NONE=y
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -136,16 +145,17 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-# CONFIG_SOFTWARE_SUSPEND is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
 
 #
 # Bus options
 #
+# CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
@@ -187,6 +197,8 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -204,12 +216,18 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -264,6 +282,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -295,6 +314,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -355,6 +375,9 @@ CONFIG_PHYLIB=y
 # CONFIG_QSEMI_PHY is not set
 # CONFIG_LXT_PHY is not set
 # CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -464,6 +487,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -473,7 +497,6 @@ CONFIG_GEN_RTC=y
 #
 # Ftape, the floppy tape device driver
 #
-# CONFIG_AGP is not set
 # CONFIG_RAW_DRIVER is not set
 
 #
@@ -496,13 +519,13 @@ CONFIG_GEN_RTC=y
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
@@ -514,6 +537,7 @@ CONFIG_HWMON=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -523,7 +547,9 @@ CONFIG_HWMON=y
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -551,6 +577,19 @@ CONFIG_HWMON=y
 #
 # CONFIG_MMC is not set
 
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
 #
 # InfiniBand support
 #
@@ -559,6 +598,24 @@ CONFIG_HWMON=y
 # EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
 #
 
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
 #
 # File systems
 #
@@ -580,6 +637,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -677,6 +735,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
 
 #
 # Instrumentation Support
@@ -688,14 +747,19 @@ CONFIG_CRC32=y
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
@@ -706,11 +770,7 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_DEBUGGER is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
 
 #
 # Security options

arch/powerpc/configs/mpc85xx_cds_defconfig

@@ -1,16 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16
-# Sun Apr  2 11:23:42 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:29:49 2006
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
@@ -19,7 +21,7 @@ CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
-# CONFIG_DEFAULT_UIMAGE is not set
+CONFIG_DEFAULT_UIMAGE=y
 
 #
 # Processor support
@@ -29,6 +31,7 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_PPC_82xx is not set
 # CONFIG_PPC_83xx is not set
 CONFIG_PPC_85xx=y
+# CONFIG_PPC_86xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_8xx is not set
@@ -39,6 +42,7 @@ CONFIG_BOOKE=y
 CONFIG_FSL_BOOKE=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_SPE=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -56,6 +60,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 # CONFIG_IKCONFIG is not set
@@ -71,10 +76,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -103,7 +110,6 @@ CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_MPIC=y
 # CONFIG_WANT_EARLY_SERIAL is not set
 
 #
@@ -113,6 +119,7 @@ CONFIG_MPIC=y
 CONFIG_MPC85xx_CDS=y
 CONFIG_MPC8540=y
 CONFIG_PPC_INDIRECT_PCI_BE=y
+CONFIG_MPIC=y
 
 #
 # Kernel options
@@ -128,6 +135,7 @@ CONFIG_PREEMPT_NONE=y
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
@@ -137,21 +145,23 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
-# CONFIG_SOFTWARE_SUSPEND is not set
 # CONFIG_SECCOMP is not set
 CONFIG_ISA_DMA_API=y
 
 #
 # Bus options
 #
-CONFIG_PPC_I8259=y
+# CONFIG_MPIC_WEIRD is not set
+# CONFIG_PPC_I8259 is not set
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -190,6 +200,8 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
@@ -209,6 +221,8 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -216,6 +230,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -270,6 +285,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -306,6 +322,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -425,6 +442,9 @@ CONFIG_PHYLIB=y
 # CONFIG_QSEMI_PHY is not set
 # CONFIG_LXT_PHY is not set
 # CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -470,6 +490,7 @@ CONFIG_GFAR_NAPI=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -568,6 +589,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
@@ -602,13 +624,13 @@ CONFIG_GEN_RTC=y
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
@@ -620,6 +642,7 @@ CONFIG_HWMON=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -629,7 +652,9 @@ CONFIG_HWMON=y
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -663,6 +688,14 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # CONFIG_NEW_LEDS is not set
 
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
 #
 # InfiniBand support
 #
@@ -677,6 +710,19 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # CONFIG_RTC_CLASS is not set
 
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
 #
 # File systems
 #
@@ -698,6 +744,7 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -795,6 +842,7 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
 
 #
 # Instrumentation Support
@@ -806,14 +854,19 @@ CONFIG_CRC32=y
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set
@@ -824,11 +877,7 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_DEBUGGER is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
 
 #
 # Security options

arch/powerpc/configs/mpc8641_hpcn_defconfig

@@ -1,16 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc3
-# Fri Jun 16 10:47:09 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:30:15 2006
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
@@ -41,6 +43,7 @@ CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -58,6 +61,7 @@ CONFIG_LOCALVERSION=""
 # CONFIG_SYSVIPC is not set
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
@@ -75,10 +79,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 # CONFIG_ELF_CORE is not set
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 # CONFIG_SLAB is not set
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_SLOB=y
@@ -107,9 +113,9 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_MPIC=y
 # CONFIG_WANT_EARLY_SERIAL is not set
 CONFIG_PPC_INDIRECT_PCI_BE=y
+CONFIG_MPIC=y
 
 #
 # Platform Support
@@ -131,6 +137,7 @@ CONFIG_PREEMPT_NONE=y
 CONFIG_PREEMPT_BKL=y
 CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 # CONFIG_IRQ_ALL_CPUS is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -141,6 +148,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
 # CONFIG_PM is not set
@@ -151,11 +159,13 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
 CONFIG_PPC_I8259=y
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_FSL_SOC=y
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -194,6 +204,8 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 # CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -212,6 +224,8 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -224,7 +238,10 @@ CONFIG_IPV6=y
 # CONFIG_INET6_IPCOMP is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=y
+CONFIG_INET6_XFRM_MODE_TUNNEL=y
 # CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -279,6 +296,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -315,6 +333,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -383,6 +402,8 @@ CONFIG_PHYLIB=y
 # CONFIG_LXT_PHY is not set
 # CONFIG_CICADA_PHY is not set
 CONFIG_VITESSE_PHY=y
+# CONFIG_SMSC_PHY is not set
+# CONFIG_FIXED_PHY is not set
 
 #
 # Ethernet (10 or 100Mbit)
@@ -426,6 +447,7 @@ CONFIG_GIANFAR=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -500,6 +522,7 @@ CONFIG_SERIO_LIBPS2=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -534,6 +557,7 @@ CONFIG_UNIX98_PTYS=y
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
@@ -579,6 +603,7 @@ CONFIG_I2C=y
 # CONFIG_I2C_PIIX4 is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
@@ -615,7 +640,6 @@ CONFIG_SENSORS_EEPROM=y
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -631,6 +655,7 @@ CONFIG_SENSORS_EEPROM=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -640,6 +665,7 @@ CONFIG_SENSORS_EEPROM=y
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB is not set
 
 #
@@ -648,6 +674,7 @@ CONFIG_SENSORS_EEPROM=y
 CONFIG_VGA_CONSOLE=y
 # CONFIG_VGACON_SOFT_SCROLLBACK is not set
 CONFIG_DUMMY_CONSOLE=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -703,6 +730,19 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # CONFIG_RTC_CLASS is not set
 
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
+#
+
 #
 # File systems
 #
@@ -870,6 +910,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
+CONFIG_PLIST=y
 
 #
 # Instrumentation Support
@@ -881,13 +922,18 @@ CONFIG_CRC32=y
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_HIGHMEM is not set
 # CONFIG_DEBUG_INFO is not set
@@ -899,11 +945,7 @@ CONFIG_FORCED_INLINING=y
 # CONFIG_DEBUGGER is not set
 # CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
 
 #
 # Security options

arch/powerpc/configs/pmac32_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17
-# Mon Jul  3 14:20:49 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:30:23 2006
 #
 # CONFIG_PPC64 is not set
 CONFIG_PPC32=y
@@ -60,6 +60,7 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
@@ -128,7 +129,6 @@ CONFIG_PPC_PMAC=y
 # CONFIG_PPC_CELL is not set
 # CONFIG_PPC_CELL_NATIVE is not set
 # CONFIG_UDBG_RTAS_CONSOLE is not set
-CONFIG_MPIC=y
 # CONFIG_PPC_RTAS is not set
 # CONFIG_MMIO_NVRAM is not set
 CONFIG_PPC_MPC106=y
@@ -149,6 +149,7 @@ CONFIG_CPU_FREQ_PMAC=y
 CONFIG_PPC601_SYNC_FIX=y
 # CONFIG_TAU is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_MPIC=y
 
 #
 # Kernel options
@@ -189,6 +190,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
 # CONFIG_PPC_I8259 is not set
 CONFIG_PPC_INDIRECT_PCI=y
 CONFIG_PCI=y
@@ -559,6 +561,7 @@ CONFIG_BLK_DEV_UB=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -1502,7 +1505,6 @@ CONFIG_USB_MON=y
 CONFIG_USB_SERIAL=m
 # CONFIG_USB_SERIAL_GENERIC is not set
 # CONFIG_USB_SERIAL_AIRPRIME is not set
-# CONFIG_USB_SERIAL_ANYDATA is not set
 # CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
@@ -1540,6 +1542,7 @@ CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
 # CONFIG_USB_SERIAL_PL2303 is not set
 # CONFIG_USB_SERIAL_HP4X is not set
 # CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
@@ -1557,7 +1560,7 @@ CONFIG_USB_EZUSB=y
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
-# CONFIG_USB_CY7C63 is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
@@ -1728,7 +1731,6 @@ CONFIG_RPCSEC_GSS_KRB5=y
 CONFIG_SMB_FS=m
 # CONFIG_SMB_NLS_DEFAULT is not set
 # CONFIG_CIFS is not set
-# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1831,11 +1833,13 @@ CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 # CONFIG_DEBUG_FS is not set

arch/powerpc/configs/ppc64_defconfig

@@ -1,15 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.16-rc2
-# Fri Feb 10 17:32:14 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:45:11 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
 CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_IRQ_PER_CPU=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_COMPAT=y
@@ -30,8 +33,10 @@ CONFIG_POWER4=y
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
+CONFIG_VIRT_CPU_ACCOUNTING=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=32
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -49,11 +54,14 @@ CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
 # CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
 CONFIG_SYSCTL=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_CPUSETS=y
+CONFIG_RELAY=y
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
@@ -65,14 +73,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -83,7 +89,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_KMOD=y
@@ -92,6 +97,7 @@ CONFIG_STOP_MACHINE=y
 #
 # Block layer
 #
+CONFIG_BLK_DEV_IO_TRACE=y
 
 #
 # IO Schedulers
@@ -117,19 +123,22 @@ CONFIG_PPC_PSERIES=y
 CONFIG_PPC_PMAC=y
 CONFIG_PPC_PMAC64=y
 CONFIG_PPC_MAPLE=y
-# CONFIG_PPC_CELL is not set
+CONFIG_PPC_CELL=y
+CONFIG_PPC_CELL_NATIVE=y
+CONFIG_PPC_IBM_CELL_BLADE=y
+CONFIG_UDBG_RTAS_CONSOLE=y
 CONFIG_XICS=y
 CONFIG_U3_DART=y
-CONFIG_MPIC=y
 CONFIG_PPC_RTAS=y
 CONFIG_RTAS_ERROR_LOGGING=y
 CONFIG_RTAS_PROC=y
 CONFIG_RTAS_FLASH=m
-# CONFIG_MMIO_NVRAM is not set
+CONFIG_MMIO_NVRAM=y
 CONFIG_MPIC_BROKEN_U3=y
 CONFIG_IBMVIO=y
 # CONFIG_IBMEBUS is not set
 # CONFIG_PPC_MPC106 is not set
+CONFIG_PPC_970_NAP=y
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_DEBUG is not set
@@ -144,6 +153,15 @@ CONFIG_CPU_FREQ_GOV_USERSPACE=y
 # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_PMAC64=y
 # CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_MPIC=y
+
+#
+# Cell Broadband Engine options
+#
+CONFIG_SPU_FS=m
+CONFIG_SPU_BASE=y
+CONFIG_SPUFS_MMAP=y
+CONFIG_CBE_RAS=y
 
 #
 # Kernel options
@@ -161,6 +179,7 @@ CONFIG_BINFMT_MISC=m
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_IOMMU_VMERGE=y
 CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_KEXEC=y
 # CONFIG_CRASH_DUMP is not set
 CONFIG_IRQ_ALL_CPUS=y
@@ -181,9 +200,10 @@ CONFIG_SPARSEMEM=y
 CONFIG_HAVE_MEMORY_PRESENT=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPARSEMEM_EXTREME=y
-# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_MEMORY_HOTPLUG=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
+CONFIG_RESOURCES_64BIT=y
+CONFIG_ARCH_MEMORY_PROBE=y
 # CONFIG_PPC_64K_PAGES is not set
 # CONFIG_SCHED_SMT is not set
 CONFIG_PROC_DEVICETREE=y
@@ -196,11 +216,12 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
 CONFIG_PPC_I8259=y
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-# CONFIG_PCI_LEGACY_PROC is not set
+# CONFIG_PCIEPORTBUS is not set
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -247,7 +268,10 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=m
 CONFIG_INET_ESP=m
 CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=y
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -258,6 +282,9 @@ CONFIG_TCP_CONG_BIC=y
 #
 # CONFIG_IP_VS is not set
 # CONFIG_IPV6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 CONFIG_NETFILTER=y
 # CONFIG_NETFILTER_DEBUG is not set
 
@@ -284,6 +311,8 @@ CONFIG_IP_NF_IRC=m
 CONFIG_IP_NF_TFTP=m
 CONFIG_IP_NF_AMANDA=m
 # CONFIG_IP_NF_PPTP is not set
+# CONFIG_IP_NF_H323 is not set
+CONFIG_IP_NF_SIP=m
 CONFIG_IP_NF_QUEUE=m
 
 #
@@ -339,6 +368,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -376,6 +406,7 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
 CONFIG_BLK_DEV_INITRD=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
@@ -436,7 +467,6 @@ CONFIG_BLK_DEV_AMD74XX=y
 CONFIG_BLK_DEV_IDE_PMAC=y
 CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
 CONFIG_BLK_DEV_IDEDMA_PMAC=y
-# CONFIG_BLK_DEV_IDE_PMAC_BLINK is not set
 # CONFIG_IDE_ARM is not set
 CONFIG_BLK_DEV_IDEDMA=y
 # CONFIG_IDEDMA_IVB is not set
@@ -497,6 +527,7 @@ CONFIG_SCSI_SATA_SVW=y
 # CONFIG_SCSI_SATA_MV is not set
 # CONFIG_SCSI_SATA_NV is not set
 # CONFIG_SCSI_PDC_ADMA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_SATA_QSTOR is not set
 # CONFIG_SCSI_SATA_PROMISE is not set
 # CONFIG_SCSI_SATA_SX4 is not set
@@ -519,11 +550,10 @@ CONFIG_SCSI_SYM53C8XX_2=y
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
-# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+CONFIG_SCSI_SYM53C8XX_MMIO=y
 CONFIG_SCSI_IPR=y
 CONFIG_SCSI_IPR_TRACE=y
 CONFIG_SCSI_IPR_DUMP=y
-# CONFIG_SCSI_QLOGIC_FC is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
 # CONFIG_SCSI_QLA_FC is not set
 CONFIG_SCSI_LPFC=m
@@ -540,8 +570,8 @@ CONFIG_MD_LINEAR=y
 CONFIG_MD_RAID0=y
 CONFIG_MD_RAID1=y
 CONFIG_MD_RAID10=y
-CONFIG_MD_RAID5=y
-CONFIG_MD_RAID6=m
+CONFIG_MD_RAID456=y
+CONFIG_MD_RAID5_RESHAPE=y
 CONFIG_MD_MULTIPATH=m
 CONFIG_MD_FAULTY=m
 CONFIG_BLK_DEV_DM=y
@@ -585,7 +615,6 @@ CONFIG_IEEE1394_OHCI1394=y
 #
 CONFIG_IEEE1394_VIDEO1394=m
 CONFIG_IEEE1394_SBP2=m
-# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
 CONFIG_IEEE1394_ETH1394=m
 CONFIG_IEEE1394_DV1394=m
 CONFIG_IEEE1394_RAWIO=y
@@ -599,6 +628,7 @@ CONFIG_IEEE1394_RAWIO=y
 # Macintosh device drivers
 #
 CONFIG_ADB_PMU=y
+# CONFIG_ADB_PMU_LED is not set
 CONFIG_PMAC_SMU=y
 CONFIG_THERM_PM72=y
 CONFIG_WINDFARM=y
@@ -682,6 +712,7 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 CONFIG_TIGON3=y
 # CONFIG_BNX2 is not set
+CONFIG_SPIDER_NET=m
 # CONFIG_MV643XX_ETH is not set
 
 #
@@ -691,6 +722,7 @@ CONFIG_TIGON3=y
 CONFIG_IXGB=m
 # CONFIG_IXGB_NAPI is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -792,6 +824,7 @@ CONFIG_SERIO_LIBPS2=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -799,6 +832,7 @@ CONFIG_HW_CONSOLE=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -814,7 +848,9 @@ CONFIG_SERIAL_ICOM=m
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_HVC_DRIVER=y
 CONFIG_HVC_CONSOLE=y
+CONFIG_HVC_RTAS=y
 CONFIG_HVCS=m
 
 #
@@ -826,7 +862,7 @@ CONFIG_HVCS=m
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
-# CONFIG_RTC is not set
+# CONFIG_HW_RANDOM is not set
 CONFIG_GEN_RTC=y
 # CONFIG_GEN_RTC_X is not set
 # CONFIG_DTLK is not set
@@ -874,10 +910,10 @@ CONFIG_I2C_AMD8111=y
 # CONFIG_I2C_PIIX4 is not set
 CONFIG_I2C_POWERMAC=y
 # CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
@@ -896,9 +932,7 @@ CONFIG_I2C_POWERMAC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -913,7 +947,6 @@ CONFIG_I2C_POWERMAC=y
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -925,38 +958,34 @@ CONFIG_I2C_POWERMAC=y
 # Misc devices
 #
 
-#
-# Multimedia Capabilities Port drivers
-#
-
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
 #
 # CONFIG_DVB is not set
+# CONFIG_USB_DABUSB is not set
 
 #
 # Graphics support
 #
+CONFIG_FIRMWARE_EDID=y
 CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 CONFIG_FB_MACMODES=y
+# CONFIG_FB_BACKLIGHT is not set
 CONFIG_FB_MODE_HELPERS=y
 CONFIG_FB_TILEBLITTING=y
 # CONFIG_FB_CIRRUS is not set
 # CONFIG_FB_PM2 is not set
 # CONFIG_FB_CYBER2000 is not set
 CONFIG_FB_OF=y
-# CONFIG_FB_CONTROL is not set
-# CONFIG_FB_PLATINUM is not set
-# CONFIG_FB_VALKYRIE is not set
-# CONFIG_FB_CT65550 is not set
 # CONFIG_FB_ASILIANT is not set
 # CONFIG_FB_IMSTT is not set
 # CONFIG_FB_VGA16 is not set
@@ -970,7 +999,6 @@ CONFIG_FB_MATROX_G=y
 CONFIG_FB_MATROX_I2C=m
 CONFIG_FB_MATROX_MAVEN=m
 CONFIG_FB_MATROX_MULTIHEAD=y
-# CONFIG_FB_RADEON_OLD is not set
 CONFIG_FB_RADEON=y
 CONFIG_FB_RADEON_I2C=y
 # CONFIG_FB_RADEON_DEBUG is not set
@@ -1025,9 +1053,11 @@ CONFIG_SND_SEQ_DUMMY=m
 CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=m
 CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_SEQUENCER_OSS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 
@@ -1044,6 +1074,7 @@ CONFIG_SND_SUPPORT_OLD_API=y
 # PCI devices
 #
 # CONFIG_SND_AD1889 is not set
+# CONFIG_SND_ALS300 is not set
 # CONFIG_SND_ALS4000 is not set
 # CONFIG_SND_ALI5451 is not set
 # CONFIG_SND_ATIIXP is not set
@@ -1057,6 +1088,18 @@ CONFIG_SND_SUPPORT_OLD_API=y
 # CONFIG_SND_CMIPCI is not set
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
+# CONFIG_SND_DARLA20 is not set
+# CONFIG_SND_GINA20 is not set
+# CONFIG_SND_LAYLA20 is not set
+# CONFIG_SND_DARLA24 is not set
+# CONFIG_SND_GINA24 is not set
+# CONFIG_SND_LAYLA24 is not set
+# CONFIG_SND_MONA is not set
+# CONFIG_SND_MIA is not set
+# CONFIG_SND_ECHO3G is not set
+# CONFIG_SND_INDIGO is not set
+# CONFIG_SND_INDIGOIO is not set
+# CONFIG_SND_INDIGODJ is not set
 # CONFIG_SND_EMU10K1 is not set
 # CONFIG_SND_EMU10K1X is not set
 # CONFIG_SND_ENS1370 is not set
@@ -1076,6 +1119,7 @@ CONFIG_SND_SUPPORT_OLD_API=y
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
 # CONFIG_SND_PCXHR is not set
+# CONFIG_SND_RIPTIDE is not set
 # CONFIG_SND_RME32 is not set
 # CONFIG_SND_RME96 is not set
 # CONFIG_SND_RME9652 is not set
@@ -1092,6 +1136,17 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_POWERMAC=m
 CONFIG_SND_POWERMAC_AUTO_DRC=y
 
+#
+# Apple Onboard Audio driver
+#
+CONFIG_SND_AOA=m
+CONFIG_SND_AOA_FABRIC_LAYOUT=m
+CONFIG_SND_AOA_ONYX=m
+CONFIG_SND_AOA_TAS=m
+CONFIG_SND_AOA_TOONIE=m
+CONFIG_SND_AOA_SOUNDBUS=m
+CONFIG_SND_AOA_SOUNDBUS_I2S=m
+
 #
 # USB devices
 #
@@ -1108,6 +1163,7 @@ CONFIG_SND_POWERMAC_AUTO_DRC=y
 #
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 # CONFIG_USB_DEBUG is not set
 
@@ -1125,6 +1181,7 @@ CONFIG_USB_DEVICEFS=y
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+CONFIG_USB_EHCI_TT_NEWSCHED=y
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN is not set
@@ -1135,7 +1192,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 #
 # USB Device Class drivers
 #
-# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
 
@@ -1173,9 +1229,7 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_ACECAD is not set
 # CONFIG_USB_KBTAB is not set
 # CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_MTOUCH is not set
-# CONFIG_USB_ITMTOUCH is not set
-# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_TOUCHSCREEN is not set
 # CONFIG_USB_YEALINK is not set
 # CONFIG_USB_XPAD is not set
 # CONFIG_USB_ATI_REMOTE is not set
@@ -1189,15 +1243,6 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_MDC800 is not set
 # CONFIG_USB_MICROTEK is not set
 
-#
-# USB Multimedia devices
-#
-# CONFIG_USB_DABUSB is not set
-
-#
-# Video4Linux support is needed for USB Multimedia device support
-#
-
 #
 # USB Network Adapters
 #
@@ -1227,10 +1272,12 @@ CONFIG_USB_HIDDEV=y
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+CONFIG_USB_APPLEDISPLAY=m
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
@@ -1249,24 +1296,54 @@ CONFIG_USB_HIDDEV=y
 #
 # CONFIG_MMC is not set
 
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
 #
 # InfiniBand support
 #
 CONFIG_INFINIBAND=m
 # CONFIG_INFINIBAND_USER_MAD is not set
 # CONFIG_INFINIBAND_USER_ACCESS is not set
+CONFIG_INFINIBAND_ADDR_TRANS=y
 CONFIG_INFINIBAND_MTHCA=m
-# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
+CONFIG_INFINIBAND_MTHCA_DEBUG=y
 CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+CONFIG_INFINIBAND_IPOIB_DEBUG=y
+# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
 # CONFIG_INFINIBAND_SRP is not set
+CONFIG_INFINIBAND_ISER=m
 
 #
-# SN Devices
+# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
 #
 
 #
-# EDAC - error detection and reporting (RAS)
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
+#
+# DMA Engine support
+#
+# CONFIG_DMA_ENGINE is not set
+
+#
+# DMA Clients
+#
+
+#
+# DMA Devices
 #
 
 #
@@ -1298,7 +1375,6 @@ CONFIG_JFS_SECURITY=y
 # CONFIG_JFS_STATISTICS is not set
 CONFIG_FS_POSIX_ACL=y
 CONFIG_XFS_FS=m
-CONFIG_XFS_EXPORT=y
 # CONFIG_XFS_QUOTA is not set
 CONFIG_XFS_SECURITY=y
 CONFIG_XFS_POSIX_ACL=y
@@ -1307,6 +1383,7 @@ CONFIG_XFS_POSIX_ACL=y
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 CONFIG_AUTOFS_FS=y
@@ -1342,7 +1419,6 @@ CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
 # CONFIG_CONFIGFS_FS is not set
 
 #
@@ -1388,8 +1464,10 @@ CONFIG_RPCSEC_GSS_SPKM3=m
 # CONFIG_SMB_FS is not set
 CONFIG_CIFS=m
 # CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_WEAK_PW_HASH is not set
 CONFIG_CIFS_XATTR=y
 CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_CIFS_EXPERIMENTAL is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1470,6 +1548,9 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=m
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_PLIST=y
 
 #
 # Instrumentation Support
@@ -1483,14 +1564,19 @@ CONFIG_OPROFILE=y
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=17
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_INFO is not set
 CONFIG_DEBUG_FS=y
@@ -1504,11 +1590,7 @@ CONFIG_XMON=y
 # CONFIG_XMON_DEFAULT is not set
 CONFIG_IRQSTACKS=y
 CONFIG_BOOTX_TEXT=y
-# CONFIG_PPC_EARLY_DEBUG_LPAR is not set
-# CONFIG_PPC_EARLY_DEBUG_G5 is not set
-# CONFIG_PPC_EARLY_DEBUG_RTAS is not set
-# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set
-# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set
+# CONFIG_PPC_EARLY_DEBUG is not set
 
 #
 # Security options

arch/powerpc/configs/pseries_defconfig

@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18-rc3
-# Tue Aug  8 09:14:48 2006
+# Linux kernel version: 2.6.18-rc6
+# Sun Sep 10 10:45:12 2006
 #
 CONFIG_PPC64=y
 CONFIG_64BIT=y
@@ -128,7 +128,6 @@ CONFIG_PPC_PSERIES=y
 # CONFIG_UDBG_RTAS_CONSOLE is not set
 CONFIG_XICS=y
 # CONFIG_U3_DART is not set
-CONFIG_MPIC=y
 CONFIG_PPC_RTAS=y
 CONFIG_RTAS_ERROR_LOGGING=y
 CONFIG_RTAS_PROC=y
@@ -140,6 +139,7 @@ CONFIG_IBMEBUS=y
 # CONFIG_PPC_970_NAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
+CONFIG_MPIC=y
 
 #
 # Kernel options
@@ -196,6 +196,7 @@ CONFIG_ISA_DMA_API=y
 # Bus options
 #
 CONFIG_GENERIC_ISA_DMA=y
+# CONFIG_MPIC_WEIRD is not set
 CONFIG_PPC_I8259=y
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
@@ -790,7 +791,6 @@ CONFIG_SERIAL_JSM=m
 CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
-# CONFIG_BRIQ_PANEL is not set
 # CONFIG_PRINTER is not set
 # CONFIG_PPDEV is not set
 # CONFIG_TIPAR is not set

arch/powerpc/kernel/Makefile

@@ -70,6 +70,8 @@ obj-$(CONFIG_PCI)		+= $(pci64-y) $(pci32-y)
 kexec-$(CONFIG_PPC64)		:= machine_kexec_64.o
 kexec-$(CONFIG_PPC32)		:= machine_kexec_32.o
 obj-$(CONFIG_KEXEC)		+= machine_kexec.o crash.o $(kexec-y)
+obj-$(CONFIG_AUDIT)		+= audit.o
+obj64-$(CONFIG_AUDIT)		+= compat_audit.o
 
 ifeq ($(CONFIG_PPC_ISERIES),y)
 $(obj)/head_64.o: $(obj)/lparmap.s

arch/powerpc/kernel/audit.c

@@ -0,0 +1,66 @@
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/audit.h>
+#include <asm/unistd.h>
+
+static unsigned dir_class[] = {
+#include <asm-generic/audit_dir_write.h>
+~0U
+};
+
+static unsigned read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+static unsigned write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
+static unsigned chattr_class[] = {
+#include <asm-generic/audit_change_attr.h>
+~0U
+};
+
+int audit_classify_syscall(int abi, unsigned syscall)
+{
+#ifdef CONFIG_PPC64
+	extern int ppc32_classify_syscall(unsigned);
+	if (abi == AUDIT_ARCH_PPC)
+		return ppc32_classify_syscall(syscall);
+#endif
+	switch(syscall) {
+	case __NR_open:
+		return 2;
+	case __NR_openat:
+		return 3;
+	case __NR_socketcall:
+		return 4;
+	case __NR_execve:
+		return 5;
+	default:
+		return 0;
+	}
+}
+
+static int __init audit_classes_init(void)
+{
+#ifdef CONFIG_PPC64
+	extern __u32 ppc32_dir_class[];
+	extern __u32 ppc32_write_class[];
+	extern __u32 ppc32_read_class[];
+	extern __u32 ppc32_chattr_class[];
+	audit_register_class(AUDIT_CLASS_WRITE_32, ppc32_write_class);
+	audit_register_class(AUDIT_CLASS_READ_32, ppc32_read_class);
+	audit_register_class(AUDIT_CLASS_DIR_WRITE_32, ppc32_dir_class);
+	audit_register_class(AUDIT_CLASS_CHATTR_32, ppc32_chattr_class);
+#endif
+	audit_register_class(AUDIT_CLASS_WRITE, write_class);
+	audit_register_class(AUDIT_CLASS_READ, read_class);
+	audit_register_class(AUDIT_CLASS_DIR_WRITE, dir_class);
+	audit_register_class(AUDIT_CLASS_CHATTR, chattr_class);
+	return 0;
+}
+
+__initcall(audit_classes_init);

arch/powerpc/kernel/compat_audit.c

@@ -0,0 +1,38 @@
+#undef __powerpc64__
+#include <asm/unistd.h>
+
+unsigned ppc32_dir_class[] = {
+#include <asm-generic/audit_dir_write.h>
+~0U
+};
+
+unsigned ppc32_chattr_class[] = {
+#include <asm-generic/audit_change_attr.h>
+~0U
+};
+
+unsigned ppc32_write_class[] = {
+#include <asm-generic/audit_write.h>
+~0U
+};
+
+unsigned ppc32_read_class[] = {
+#include <asm-generic/audit_read.h>
+~0U
+};
+
+int ppc32_classify_syscall(unsigned syscall)
+{
+	switch(syscall) {
+	case __NR_open:
+		return 2;
+	case __NR_openat:
+		return 3;
+	case __NR_socketcall:
+		return 4;
+	case __NR_execve:
+		return 5;
+	default:
+		return 1;
+	}
+}

arch/powerpc/kernel/crash.c

@@ -295,7 +295,7 @@ void default_machine_crash_shutdown(struct pt_regs *regs)
 		struct irq_desc *desc = irq_desc + irq;
 
 		if (desc->status & IRQ_INPROGRESS)
-			desc->chip->end(irq);
+			desc->chip->eoi(irq);
 
 		if (!(desc->status & IRQ_DISABLED))
 			desc->chip->disable(irq);

arch/powerpc/kernel/fpu.S

@@ -2,6 +2,11 @@
  *  FPU support code, moved here from head.S so that it can be used
  *  by chips which use other head-whatever.S files.
  *
+ *    Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *    Copyright (C) 1996 Cort Dougan <cort@cs.nmt.edu>
+ *    Copyright (C) 1996 Paul Mackerras.
+ *    Copyright (C) 1997 Dan Malek (dmalek@jlc.net).
+ *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
  *  as published by the Free Software Foundation; either version

arch/powerpc/kernel/irq.c

@@ -322,7 +322,8 @@ EXPORT_SYMBOL(do_softirq);
 
 static LIST_HEAD(irq_hosts);
 static spinlock_t irq_big_lock = SPIN_LOCK_UNLOCKED;
-
+static DEFINE_PER_CPU(unsigned int, irq_radix_reader);
+static unsigned int irq_radix_writer;
 struct irq_map_entry irq_map[NR_IRQS];
 static unsigned int irq_virq_count = NR_IRQS;
 static struct irq_host *irq_default_host;
@@ -455,6 +456,58 @@ void irq_set_virq_count(unsigned int count)
 		irq_virq_count = count;
 }
 
+/* radix tree not lockless safe ! we use a brlock-type mecanism
+ * for now, until we can use a lockless radix tree
+ */
+static void irq_radix_wrlock(unsigned long *flags)
+{
+	unsigned int cpu, ok;
+
+	spin_lock_irqsave(&irq_big_lock, *flags);
+	irq_radix_writer = 1;
+	smp_mb();
+	do {
+		barrier();
+		ok = 1;
+		for_each_possible_cpu(cpu) {
+			if (per_cpu(irq_radix_reader, cpu)) {
+				ok = 0;
+				break;
+			}
+		}
+		if (!ok)
+			cpu_relax();
+	} while(!ok);
+}
+
+static void irq_radix_wrunlock(unsigned long flags)
+{
+	smp_wmb();
+	irq_radix_writer = 0;
+	spin_unlock_irqrestore(&irq_big_lock, flags);
+}
+
+static void irq_radix_rdlock(unsigned long *flags)
+{
+	local_irq_save(*flags);
+	__get_cpu_var(irq_radix_reader) = 1;
+	smp_mb();
+	if (likely(irq_radix_writer == 0))
+		return;
+	__get_cpu_var(irq_radix_reader) = 0;
+	smp_wmb();
+	spin_lock(&irq_big_lock);
+	__get_cpu_var(irq_radix_reader) = 1;
+	spin_unlock(&irq_big_lock);
+}
+
+static void irq_radix_rdunlock(unsigned long flags)
+{
+	__get_cpu_var(irq_radix_reader) = 0;
+	local_irq_restore(flags);
+}
+
+
 unsigned int irq_create_mapping(struct irq_host *host,
 				irq_hw_number_t hwirq)
 {
@@ -604,13 +657,9 @@ void irq_dispose_mapping(unsigned int virq)
 		/* Check if radix tree allocated yet */
 		if (host->revmap_data.tree.gfp_mask == 0)
 			break;
-		/* XXX radix tree not safe ! remove lock whem it becomes safe
-		 * and use some RCU sync to make sure everything is ok before we
-		 * can re-use that map entry
-		 */
-		spin_lock_irqsave(&irq_big_lock, flags);
+		irq_radix_wrlock(&flags);
 		radix_tree_delete(&host->revmap_data.tree, hwirq);
-		spin_unlock_irqrestore(&irq_big_lock, flags);
+		irq_radix_wrunlock(flags);
 		break;
 	}
 
@@ -677,25 +726,24 @@ unsigned int irq_radix_revmap(struct irq_host *host,
 	if (tree->gfp_mask == 0)
 		return irq_find_mapping(host, hwirq);
 
-	/* XXX Current radix trees are NOT SMP safe !!! Remove that lock
-	 * when that is fixed (when Nick's patch gets in
-	 */
-	spin_lock_irqsave(&irq_big_lock, flags);
-
 	/* Now try to resolve */
+	irq_radix_rdlock(&flags);
 	ptr = radix_tree_lookup(tree, hwirq);
+	irq_radix_rdunlock(flags);
+
 	/* Found it, return */
 	if (ptr) {
 		virq = ptr - irq_map;
-		goto bail;
+		return virq;
 	}
 
 	/* If not there, try to insert it */
 	virq = irq_find_mapping(host, hwirq);
-	if (virq != NO_IRQ)
+	if (virq != NO_IRQ) {
+		irq_radix_wrlock(&flags);
 		radix_tree_insert(tree, hwirq, &irq_map[virq]);
- bail:
-	spin_unlock_irqrestore(&irq_big_lock, flags);
+		irq_radix_wrunlock(flags);
+	}
 	return virq;
 }
 
@@ -806,12 +854,12 @@ static int irq_late_init(void)
 	struct irq_host *h;
 	unsigned long flags;
 
-	spin_lock_irqsave(&irq_big_lock, flags);
+	irq_radix_wrlock(&flags);
 	list_for_each_entry(h, &irq_hosts, link) {
 		if (h->revmap_type == IRQ_HOST_MAP_TREE)
 			INIT_RADIX_TREE(&h->revmap_data.tree, GFP_ATOMIC);
 	}
-	spin_unlock_irqrestore(&irq_big_lock, flags);
+	irq_radix_wrunlock(flags);
 
 	return 0;
 }

arch/powerpc/kernel/misc.S

@@ -17,15 +17,6 @@
 
 	.text
 
-#ifdef CONFIG_PPC64
-#define IN_SYNC		twi	0,r5,0; isync
-#define EIEIO_32
-#define SYNC_64		sync
-#else /* CONFIG_PPC32 */
-#define IN_SYNC
-#define EIEIO_32	eieio
-#define SYNC_64
-#endif
 /*
  * Returns (address we are running at) - (address we were linked at)
  * for use before the text and data are mapped to KERNELBASE.
@@ -70,6 +61,7 @@ _GLOBAL(add_reloc_offset)
  * The *_ns versions don't do byte-swapping.
  */
 _GLOBAL(_insb)
+	sync
 	cmpwi	0,r5,0
 	mtctr	r5
 	subi	r4,r4,1
@@ -78,7 +70,8 @@ _GLOBAL(_insb)
 	eieio
 	stbu	r5,1(r4)
 	bdnz	00b
-	IN_SYNC
+	twi	0,r5,0
+	isync
 	blr
 
 _GLOBAL(_outsb)
@@ -86,14 +79,15 @@ _GLOBAL(_outsb)
 	mtctr	r5
 	subi	r4,r4,1
 	blelr-
+	sync
 00:	lbzu	r5,1(r4)
 	stb	r5,0(r3)
-	EIEIO_32
 	bdnz	00b
-	SYNC_64
+	sync
 	blr
 
 _GLOBAL(_insw)
+	sync
 	cmpwi	0,r5,0
 	mtctr	r5
 	subi	r4,r4,2
@@ -102,7 +96,8 @@ _GLOBAL(_insw)
 	eieio
 	sthu	r5,2(r4)
 	bdnz	00b
-	IN_SYNC
+	twi	0,r5,0
+	isync
 	blr
 
 _GLOBAL(_outsw)
@@ -110,14 +105,15 @@ _GLOBAL(_outsw)
 	mtctr	r5
 	subi	r4,r4,2
 	blelr-
+	sync
 00:	lhzu	r5,2(r4)
-	EIEIO_32
 	sthbrx	r5,0,r3
 	bdnz	00b
-	SYNC_64
+	sync
 	blr
 
 _GLOBAL(_insl)
+	sync
 	cmpwi	0,r5,0
 	mtctr	r5
 	subi	r4,r4,4
@@ -126,7 +122,8 @@ _GLOBAL(_insl)
 	eieio
 	stwu	r5,4(r4)
 	bdnz	00b
-	IN_SYNC
+	twi	0,r5,0
+	isync
 	blr
 
 _GLOBAL(_outsl)
@@ -134,17 +131,18 @@ _GLOBAL(_outsl)
 	mtctr	r5
 	subi	r4,r4,4
 	blelr-
+	sync
 00:	lwzu	r5,4(r4)
 	stwbrx	r5,0,r3
-	EIEIO_32
 	bdnz	00b
-	SYNC_64
+	sync
 	blr
 
 #ifdef CONFIG_PPC32
 _GLOBAL(__ide_mm_insw)
 #endif
 _GLOBAL(_insw_ns)
+	sync
 	cmpwi	0,r5,0
 	mtctr	r5
 	subi	r4,r4,2
@@ -153,7 +151,8 @@ _GLOBAL(_insw_ns)
 	eieio
 	sthu	r5,2(r4)
 	bdnz	00b
-	IN_SYNC
+	twi	0,r5,0
+	isync
 	blr
 
 #ifdef CONFIG_PPC32
@@ -164,17 +163,18 @@ _GLOBAL(_outsw_ns)
 	mtctr	r5
 	subi	r4,r4,2
 	blelr-
+	sync
 00:	lhzu	r5,2(r4)
 	sth	r5,0(r3)
-	EIEIO_32
 	bdnz	00b
-	SYNC_64
+	sync
 	blr
 
 #ifdef CONFIG_PPC32
 _GLOBAL(__ide_mm_insl)
 #endif
 _GLOBAL(_insl_ns)
+	sync
 	cmpwi	0,r5,0
 	mtctr	r5
 	subi	r4,r4,4
@@ -183,7 +183,8 @@ _GLOBAL(_insl_ns)
 	eieio
 	stwu	r5,4(r4)
 	bdnz	00b
-	IN_SYNC
+	twi	0,r5,0
+	isync
 	blr
 
 #ifdef CONFIG_PPC32
@@ -194,10 +195,10 @@ _GLOBAL(_outsl_ns)
 	mtctr	r5
 	subi	r4,r4,4
 	blelr-
+	sync
 00:	lwzu	r5,4(r4)
 	stw	r5,0(r3)
-	EIEIO_32
 	bdnz	00b
-	SYNC_64
+	sync
 	blr
 

arch/powerpc/kernel/pci_64.c

@@ -1289,6 +1289,9 @@ int pci_read_irq_line(struct pci_dev *pci_dev)
 
 	DBG("Try to map irq for %s...\n", pci_name(pci_dev));
 
+#ifdef DEBUG
+	memset(&oirq, 0xff, sizeof(oirq));
+#endif
 	/* Try to get a mapping from the device-tree */
 	if (of_irq_map_pci(pci_dev, &oirq)) {
 		u8 line, pin;
@@ -1314,8 +1317,9 @@ int pci_read_irq_line(struct pci_dev *pci_dev)
 		if (virq != NO_IRQ)
 			set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
 	} else {
-		DBG(" -> got one, spec %d cells (0x%08x...) on %s\n",
-		    oirq.size, oirq.specifier[0], oirq.controller->full_name);
+		DBG(" -> got one, spec %d cells (0x%08x 0x%08x...) on %s\n",
+		    oirq.size, oirq.specifier[0], oirq.specifier[1],
+		    oirq.controller->full_name);
 
 		virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
 					     oirq.size);
@@ -1324,6 +1328,9 @@ int pci_read_irq_line(struct pci_dev *pci_dev)
 		DBG(" -> failed to map !\n");
 		return -1;
 	}
+
+	DBG(" -> mapped to linux irq %d\n", virq);
+
 	pci_dev->irq = virq;
 	pci_write_config_byte(pci_dev, PCI_INTERRUPT_LINE, virq);
 

arch/powerpc/kernel/ppc_ksyms.c

@@ -126,10 +126,6 @@ EXPORT_SYMBOL(pci_bus_mem_base_phys);
 EXPORT_SYMBOL(pci_bus_to_hose);
 #endif /* CONFIG_PCI */
 
-#ifdef CONFIG_NOT_COHERENT_CACHE
-EXPORT_SYMBOL(flush_dcache_all);
-#endif
-
 EXPORT_SYMBOL(start_thread);
 EXPORT_SYMBOL(kernel_thread);