Linux 2.6.18-rc2

Finishing up for the kernel summit. Ottawa, here I come.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>

CREDITS

@@ -528,11 +528,11 @@ S: Oxford
 S: United Kingdom
 
 N: Luiz Fernando N. Capitulino
-E: lcapitulino@terra.com.br
-E: lcapitulino@prefeitura.sp.gov.br
-W: http://www.telecentros.sp.gov.br
-D: Little fixes and a lot of janitorial work
-S: E-GOV Telecentros SP
+E: lcapitulino@mandriva.com.br
+E: lcapitulino@gmail.com
+W: http://www.cpu.eti.br
+D: misc kernel hacking
+S: Mandriva
 S: Brazil
 
 N: Remy Card

Documentation/DMA-mapping.txt

@@ -698,12 +698,12 @@ these interfaces.  Remember that, as defined, consistent mappings are
 always going to be SAC addressable.
 
 The first thing your driver needs to do is query the PCI platform
-layer with your devices DAC addressing capabilities:
+layer if it is capable of handling your devices DAC addressing
+capabilities:
 
-	int pci_dac_set_dma_mask(struct pci_dev *pdev, u64 mask);
+	int pci_dac_dma_supported(struct pci_dev *hwdev, u64 mask);
 
-This routine behaves identically to pci_set_dma_mask.  You may not
-use the following interfaces if this routine fails.
+You may not use the following interfaces if this routine fails.
 
 Next, DMA addresses using this API are kept track of using the
 dma64_addr_t type.  It is guaranteed to be big enough to hold any

Documentation/RCU/whatisRCU.txt

@@ -687,8 +687,9 @@ diff shows how closely related RCU and reader-writer locking can be.
 	+	spin_lock(&listmutex);
 		list_for_each_entry(p, head, lp) {
 			if (p->key == key) {
-				list_del(&p->list);
+	-			list_del(&p->list);
 	-			write_unlock(&listmutex);
+	+			list_del_rcu(&p->list);
 	+			spin_unlock(&listmutex);
 	+			synchronize_rcu();
 				kfree(p);
@@ -736,7 +737,7 @@ Or, for those who prefer a side-by-side listing:
  5   write_lock(&listmutex);            5   spin_lock(&listmutex);
  6   list_for_each_entry(p, head, lp) { 6   list_for_each_entry(p, head, lp) {
  7     if (p->key == key) {             7     if (p->key == key) {
- 8       list_del(&p->list);            8       list_del(&p->list);
+ 8       list_del(&p->list);            8       list_del_rcu(&p->list);
  9       write_unlock(&listmutex);      9       spin_unlock(&listmutex);
                                        10       synchronize_rcu();
 10       kfree(p);                     11       kfree(p);

Documentation/SubmitChecklist

@@ -1,57 +1,63 @@
 Linux Kernel patch sumbittal checklist
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 
-Here are some basic things that developers should do if they
-want to see their kernel patch submittals accepted quicker.
+Here are some basic things that developers should do if they want to see their
+kernel patch submissions accepted more quickly.
 
-These are all above and beyond the documentation that is provided
-in Documentation/SubmittingPatches and elsewhere about submitting
-Linux kernel patches.
+These are all above and beyond the documentation that is provided in
+Documentation/SubmittingPatches and elsewhere regarding submitting Linux
+kernel patches.
 
 
 
-- Builds cleanly with applicable or modified CONFIG options =y, =m, and =n.
-  No gcc warnings/errors, no linker warnings/errors.
+1: Builds cleanly with applicable or modified CONFIG options =y, =m, and
+   =n.  No gcc warnings/errors, no linker warnings/errors.
 
-- Passes allnoconfig, allmodconfig
+2: Passes allnoconfig, allmodconfig
 
-- Builds on multiple CPU arch-es by using local cross-compile tools
-  or something like PLM at OSDL.
+3: Builds on multiple CPU architectures by using local cross-compile tools
+   or something like PLM at OSDL.
 
-- ppc64 is a good architecture for cross-compilation checking because it
-  tends to use `unsigned long' for 64-bit quantities.
+4: ppc64 is a good architecture for cross-compilation checking because it
+   tends to use `unsigned long' for 64-bit quantities.
 
-- Matches kernel coding style(!)
+5: Matches kernel coding style(!)
 
-- Any new or modified CONFIG options don't muck up the config menu.
+6: Any new or modified CONFIG options don't muck up the config menu.
 
-- All new Kconfig options have help text.
+7: All new Kconfig options have help text.
 
-- Has been carefully reviewed with respect to relevant Kconfig
-  combinations.  This is very hard to get right with testing --
-  brainpower pays off here.
+8: Has been carefully reviewed with respect to relevant Kconfig
+   combinations.  This is very hard to get right with testing -- brainpower
+   pays off here.
 
-- Check cleanly with sparse.
+9: Check cleanly with sparse.
 
-- Use 'make checkstack' and 'make namespacecheck' and fix any
-  problems that they find.  Note:  checkstack does not point out
-  problems explicitly, but any one function that uses more than
-  512 bytes on the stack is a candidate for change.
+10: Use 'make checkstack' and 'make namespacecheck' and fix any problems
+    that they find.  Note: checkstack does not point out problems explicitly,
+    but any one function that uses more than 512 bytes on the stack is a
+    candidate for change.
 
-- Include kernel-doc to document global kernel APIs.  (Not required
-  for static functions, but OK there also.)  Use 'make htmldocs'
-  or 'make mandocs' to check the kernel-doc and fix any issues.
+11: Include kernel-doc to document global kernel APIs.  (Not required for
+    static functions, but OK there also.) Use 'make htmldocs' or 'make
+    mandocs' to check the kernel-doc and fix any issues.
 
-- Has been tested with CONFIG_PREEMPT, CONFIG_DEBUG_PREEMPT,
-  CONFIG_DEBUG_SLAB, CONFIG_DEBUG_PAGEALLOC, CONFIG_DEBUG_MUTEXES,
-  CONFIG_DEBUG_SPINLOCK, CONFIG_DEBUG_SPINLOCK_SLEEP all simultaneously
-  enabled.
+12: Has been tested with CONFIG_PREEMPT, CONFIG_DEBUG_PREEMPT,
+    CONFIG_DEBUG_SLAB, CONFIG_DEBUG_PAGEALLOC, CONFIG_DEBUG_MUTEXES,
+    CONFIG_DEBUG_SPINLOCK, CONFIG_DEBUG_SPINLOCK_SLEEP all simultaneously
+    enabled.
 
-- Has been build- and runtime tested with and without CONFIG_SMP and
-  CONFIG_PREEMPT.
+13: Has been build- and runtime tested with and without CONFIG_SMP and
+    CONFIG_PREEMPT.
 
-- If the patch affects IO/Disk, etc: has been tested with and without
-  CONFIG_LBD.
+14: If the patch affects IO/Disk, etc: has been tested with and without
+    CONFIG_LBD.
 
+15: All codepaths have been exercised with all lockdep features enabled.
 
-2006-APR-27
+16: All new /proc entries are documented under Documentation/
+
+17: All new kernel boot parameters are documented in
+    Documentation/kernel-parameters.txt.
+
+18: All new module parameters are documented with MODULE_PARM_DESC()

Documentation/accounting/delay-accounting.txt

@@ -0,0 +1,110 @@
+Delay accounting
+----------------
+
+Tasks encounter delays in execution when they wait
+for some kernel resource to become available e.g. a
+runnable task may wait for a free CPU to run on.
+
+The per-task delay accounting functionality measures
+the delays experienced by a task while
+
+a) waiting for a CPU (while being runnable)
+b) completion of synchronous block I/O initiated by the task
+c) swapping in pages
+
+and makes these statistics available to userspace through
+the taskstats interface.
+
+Such delays provide feedback for setting a task's cpu priority,
+io priority and rss limit values appropriately. Long delays for
+important tasks could be a trigger for raising its corresponding priority.
+
+The functionality, through its use of the taskstats interface, also provides
+delay statistics aggregated for all tasks (or threads) belonging to a
+thread group (corresponding to a traditional Unix process). This is a commonly
+needed aggregation that is more efficiently done by the kernel.
+
+Userspace utilities, particularly resource management applications, can also
+aggregate delay statistics into arbitrary groups. To enable this, delay
+statistics of a task are available both during its lifetime as well as on its
+exit, ensuring continuous and complete monitoring can be done.
+
+
+Interface
+---------
+
+Delay accounting uses the taskstats interface which is described
+in detail in a separate document in this directory. Taskstats returns a
+generic data structure to userspace corresponding to per-pid and per-tgid
+statistics. The delay accounting functionality populates specific fields of
+this structure. See
+     include/linux/taskstats.h
+for a description of the fields pertaining to delay accounting.
+It will generally be in the form of counters returning the cumulative
+delay seen for cpu, sync block I/O, swapin etc.
+
+Taking the difference of two successive readings of a given
+counter (say cpu_delay_total) for a task will give the delay
+experienced by the task waiting for the corresponding resource
+in that interval.
+
+When a task exits, records containing the per-task statistics
+are sent to userspace without requiring a command. If it is the last exiting
+task of a thread group, the per-tgid statistics are also sent. More details
+are given in the taskstats interface description.
+
+The getdelays.c userspace utility in this directory allows simple commands to
+be run and the corresponding delay statistics to be displayed. It also serves
+as an example of using the taskstats interface.
+
+Usage
+-----
+
+Compile the kernel with
+	CONFIG_TASK_DELAY_ACCT=y
+	CONFIG_TASKSTATS=y
+
+Enable the accounting at boot time by adding
+the following to the kernel boot options
+	delayacct
+
+and after the system has booted up, use a utility
+similar to  getdelays.c to access the delays
+seen by a given task or a task group (tgid).
+The utility also allows a given command to be
+executed and the corresponding delays to be
+seen.
+
+General format of the getdelays command
+
+getdelays [-t tgid] [-p pid] [-c cmd...]
+
+
+Get delays, since system boot, for pid 10
+# ./getdelays -p 10
+(output similar to next case)
+
+Get sum of delays, since system boot, for all pids with tgid 5
+# ./getdelays -t 5
+
+
+CPU	count	real total	virtual total	delay total
+	7876	92005750	100000000	24001500
+IO	count	delay total
+	0	0
+MEM	count	delay total
+	0	0
+
+Get delays seen in executing a given simple command
+# ./getdelays -c ls /
+
+bin   data1  data3  data5  dev  home  media  opt   root  srv        sys  usr
+boot  data2  data4  data6  etc  lib   mnt    proc  sbin  subdomain  tmp  var
+
+
+CPU	count	real total	virtual total	delay total
+	6	4000250		4000000		0
+IO	count	delay total
+	0	0
+MEM	count	delay total
+	0	0

Documentation/accounting/getdelays.c

@@ -0,0 +1,396 @@
+/* getdelays.c
+ *
+ * Utility to get per-pid and per-tgid delay accounting statistics
+ * Also illustrates usage of the taskstats interface
+ *
+ * Copyright (C) Shailabh Nagar, IBM Corp. 2005
+ * Copyright (C) Balbir Singh, IBM Corp. 2006
+ * Copyright (c) Jay Lan, SGI. 2006
+ *
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <unistd.h>
+#include <poll.h>
+#include <string.h>
+#include <fcntl.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/socket.h>
+#include <sys/types.h>
+#include <signal.h>
+
+#include <linux/genetlink.h>
+#include <linux/taskstats.h>
+
+/*
+ * Generic macros for dealing with netlink sockets. Might be duplicated
+ * elsewhere. It is recommended that commercial grade applications use
+ * libnl or libnetlink and use the interfaces provided by the library
+ */
+#define GENLMSG_DATA(glh)	((void *)(NLMSG_DATA(glh) + GENL_HDRLEN))
+#define GENLMSG_PAYLOAD(glh)	(NLMSG_PAYLOAD(glh, 0) - GENL_HDRLEN)
+#define NLA_DATA(na)		((void *)((char*)(na) + NLA_HDRLEN))
+#define NLA_PAYLOAD(len)	(len - NLA_HDRLEN)
+
+#define err(code, fmt, arg...) do { printf(fmt, ##arg); exit(code); } while (0)
+int done = 0;
+int rcvbufsz=0;
+
+    char name[100];
+int dbg=0, print_delays=0;
+__u64 stime, utime;
+#define PRINTF(fmt, arg...) {			\
+	    if (dbg) {				\
+		printf(fmt, ##arg);		\
+	    }					\
+	}
+
+/* Maximum size of response requested or message sent */
+#define MAX_MSG_SIZE	256
+/* Maximum number of cpus expected to be specified in a cpumask */
+#define MAX_CPUS	32
+/* Maximum length of pathname to log file */
+#define MAX_FILENAME	256
+
+struct msgtemplate {
+	struct nlmsghdr n;
+	struct genlmsghdr g;
+	char buf[MAX_MSG_SIZE];
+};
+
+char cpumask[100+6*MAX_CPUS];
+
+/*
+ * Create a raw netlink socket and bind
+ */
+static int create_nl_socket(int protocol)
+{
+	int fd;
+	struct sockaddr_nl local;
+
+	fd = socket(AF_NETLINK, SOCK_RAW, protocol);
+	if (fd < 0)
+		return -1;
+
+	if (rcvbufsz)
+		if (setsockopt(fd, SOL_SOCKET, SO_RCVBUF,
+				&rcvbufsz, sizeof(rcvbufsz)) < 0) {
+			printf("Unable to set socket rcv buf size to %d\n",
+			       rcvbufsz);
+			return -1;
+		}
+
+	memset(&local, 0, sizeof(local));
+	local.nl_family = AF_NETLINK;
+
+	if (bind(fd, (struct sockaddr *) &local, sizeof(local)) < 0)
+		goto error;
+
+	return fd;
+error:
+	close(fd);
+	return -1;
+}
+
+
+int send_cmd(int sd, __u16 nlmsg_type, __u32 nlmsg_pid,
+	     __u8 genl_cmd, __u16 nla_type,
+	     void *nla_data, int nla_len)
+{
+	struct nlattr *na;
+	struct sockaddr_nl nladdr;
+	int r, buflen;
+	char *buf;
+
+	struct msgtemplate msg;
+
+	msg.n.nlmsg_len = NLMSG_LENGTH(GENL_HDRLEN);
+	msg.n.nlmsg_type = nlmsg_type;
+	msg.n.nlmsg_flags = NLM_F_REQUEST;
+	msg.n.nlmsg_seq = 0;
+	msg.n.nlmsg_pid = nlmsg_pid;
+	msg.g.cmd = genl_cmd;
+	msg.g.version = 0x1;
+	na = (struct nlattr *) GENLMSG_DATA(&msg);
+	na->nla_type = nla_type;
+	na->nla_len = nla_len + 1 + NLA_HDRLEN;
+	memcpy(NLA_DATA(na), nla_data, nla_len);
+	msg.n.nlmsg_len += NLMSG_ALIGN(na->nla_len);
+
+	buf = (char *) &msg;
+	buflen = msg.n.nlmsg_len ;
+	memset(&nladdr, 0, sizeof(nladdr));
+	nladdr.nl_family = AF_NETLINK;
+	while ((r = sendto(sd, buf, buflen, 0, (struct sockaddr *) &nladdr,
+			   sizeof(nladdr))) < buflen) {
+		if (r > 0) {
+			buf += r;
+			buflen -= r;
+		} else if (errno != EAGAIN)
+			return -1;
+	}
+	return 0;
+}
+
+
+/*
+ * Probe the controller in genetlink to find the family id
+ * for the TASKSTATS family
+ */
+int get_family_id(int sd)
+{
+	struct {
+		struct nlmsghdr n;
+		struct genlmsghdr g;
+		char buf[256];
+	} ans;
+
+	int id, rc;
+	struct nlattr *na;
+	int rep_len;
+
+	strcpy(name, TASKSTATS_GENL_NAME);
+	rc = send_cmd(sd, GENL_ID_CTRL, getpid(), CTRL_CMD_GETFAMILY,
+			CTRL_ATTR_FAMILY_NAME, (void *)name,
+			strlen(TASKSTATS_GENL_NAME)+1);
+
+	rep_len = recv(sd, &ans, sizeof(ans), 0);
+	if (ans.n.nlmsg_type == NLMSG_ERROR ||
+	    (rep_len < 0) || !NLMSG_OK((&ans.n), rep_len))
+		return 0;
+
+	na = (struct nlattr *) GENLMSG_DATA(&ans);
+	na = (struct nlattr *) ((char *) na + NLA_ALIGN(na->nla_len));
+	if (na->nla_type == CTRL_ATTR_FAMILY_ID) {
+		id = *(__u16 *) NLA_DATA(na);
+	}
+	return id;
+}
+
+void print_delayacct(struct taskstats *t)
+{
+	printf("\n\nCPU   %15s%15s%15s%15s\n"
+	       "      %15llu%15llu%15llu%15llu\n"
+	       "IO    %15s%15s\n"
+	       "      %15llu%15llu\n"
+	       "MEM   %15s%15s\n"
+	       "      %15llu%15llu\n\n",
+	       "count", "real total", "virtual total", "delay total",
+	       t->cpu_count, t->cpu_run_real_total, t->cpu_run_virtual_total,
+	       t->cpu_delay_total,
+	       "count", "delay total",
+	       t->blkio_count, t->blkio_delay_total,
+	       "count", "delay total", t->swapin_count, t->swapin_delay_total);
+}
+
+int main(int argc, char *argv[])
+{
+	int c, rc, rep_len, aggr_len, len2, cmd_type;
+	__u16 id;
+	__u32 mypid;
+
+	struct nlattr *na;
+	int nl_sd = -1;
+	int len = 0;
+	pid_t tid = 0;
+	pid_t rtid = 0;
+
+	int fd = 0;
+	int count = 0;
+	int write_file = 0;
+	int maskset = 0;
+	char logfile[128];
+	int loop = 0;
+
+	struct msgtemplate msg;
+
+	while (1) {
+		c = getopt(argc, argv, "dw:r:m:t:p:v:l");
+		if (c < 0)
+			break;
+
+		switch (c) {
+		case 'd':
+			printf("print delayacct stats ON\n");
+			print_delays = 1;
+			break;
+		case 'w':
+			strncpy(logfile, optarg, MAX_FILENAME);
+			printf("write to file %s\n", logfile);
+			write_file = 1;
+			break;
+		case 'r':
+			rcvbufsz = atoi(optarg);
+			printf("receive buf size %d\n", rcvbufsz);
+			if (rcvbufsz < 0)
+				err(1, "Invalid rcv buf size\n");
+			break;
+		case 'm':
+			strncpy(cpumask, optarg, sizeof(cpumask));
+			maskset = 1;
+			printf("cpumask %s maskset %d\n", cpumask, maskset);
+			break;
+		case 't':
+			tid = atoi(optarg);
+			if (!tid)
+				err(1, "Invalid tgid\n");
+			cmd_type = TASKSTATS_CMD_ATTR_TGID;
+			print_delays = 1;
+			break;
+		case 'p':
+			tid = atoi(optarg);
+			if (!tid)
+				err(1, "Invalid pid\n");
+			cmd_type = TASKSTATS_CMD_ATTR_PID;
+			print_delays = 1;
+			break;
+		case 'v':
+			printf("debug on\n");
+			dbg = 1;
+			break;
+		case 'l':
+			printf("listen forever\n");
+			loop = 1;
+			break;
+		default:
+			printf("Unknown option %d\n", c);
+			exit(-1);
+		}
+	}
+
+	if (write_file) {
+		fd = open(logfile, O_WRONLY | O_CREAT | O_TRUNC,
+			  S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
+		if (fd == -1) {
+			perror("Cannot open output file\n");
+			exit(1);
+		}
+	}
+
+	if ((nl_sd = create_nl_socket(NETLINK_GENERIC)) < 0)
+		err(1, "error creating Netlink socket\n");
+
+
+	mypid = getpid();
+	id = get_family_id(nl_sd);
+	if (!id) {
+		printf("Error getting family id, errno %d", errno);
+		goto err;
+	}
+	PRINTF("family id %d\n", id);
+
+	if (maskset) {
+		rc = send_cmd(nl_sd, id, mypid, TASKSTATS_CMD_GET,
+			      TASKSTATS_CMD_ATTR_REGISTER_CPUMASK,
+			      &cpumask, sizeof(cpumask));
+		PRINTF("Sent register cpumask, retval %d\n", rc);
+		if (rc < 0) {
+			printf("error sending register cpumask\n");
+			goto err;
+		}
+	}
+
+	if (tid) {
+		rc = send_cmd(nl_sd, id, mypid, TASKSTATS_CMD_GET,
+			      cmd_type, &tid, sizeof(__u32));
+		PRINTF("Sent pid/tgid, retval %d\n", rc);
+		if (rc < 0) {
+			printf("error sending tid/tgid cmd\n");
+			goto done;
+		}
+	}
+
+	do {
+		int i;
+
+		rep_len = recv(nl_sd, &msg, sizeof(msg), 0);
+		PRINTF("received %d bytes\n", rep_len);
+
+		if (rep_len < 0) {
+			printf("nonfatal reply error: errno %d\n", errno);
+			continue;
+		}
+		if (msg.n.nlmsg_type == NLMSG_ERROR ||
+		    !NLMSG_OK((&msg.n), rep_len)) {
+			printf("fatal reply error,  errno %d\n", errno);
+			goto done;
+		}
+
+		PRINTF("nlmsghdr size=%d, nlmsg_len=%d, rep_len=%d\n",
+		       sizeof(struct nlmsghdr), msg.n.nlmsg_len, rep_len);
+
+
+		rep_len = GENLMSG_PAYLOAD(&msg.n);
+
+		na = (struct nlattr *) GENLMSG_DATA(&msg);
+		len = 0;
+		i = 0;
+		while (len < rep_len) {
+			len += NLA_ALIGN(na->nla_len);
+			switch (na->nla_type) {
+			case TASKSTATS_TYPE_AGGR_TGID:
+				/* Fall through */
+			case TASKSTATS_TYPE_AGGR_PID:
+				aggr_len = NLA_PAYLOAD(na->nla_len);
+				len2 = 0;
+				/* For nested attributes, na follows */
+				na = (struct nlattr *) NLA_DATA(na);
+				done = 0;
+				while (len2 < aggr_len) {
+					switch (na->nla_type) {
+					case TASKSTATS_TYPE_PID:
+						rtid = *(int *) NLA_DATA(na);
+						if (print_delays)
+							printf("PID\t%d\n", rtid);
+						break;
+					case TASKSTATS_TYPE_TGID:
+						rtid = *(int *) NLA_DATA(na);
+						if (print_delays)
+							printf("TGID\t%d\n", rtid);
+						break;
+					case TASKSTATS_TYPE_STATS:
+						count++;
+						if (print_delays)
+							print_delayacct((struct taskstats *) NLA_DATA(na));
+						if (fd) {
+							if (write(fd, NLA_DATA(na), na->nla_len) < 0) {
+								err(1,"write error\n");
+							}
+						}
+						if (!loop)
+							goto done;
+						break;
+					default:
+						printf("Unknown nested nla_type %d\n", na->nla_type);
+						break;
+					}
+					len2 += NLA_ALIGN(na->nla_len);
+					na = (struct nlattr *) ((char *) na + len2);
+				}
+				break;
+
+			default:
+				printf("Unknown nla_type %d\n", na->nla_type);
+				break;
+			}
+			na = (struct nlattr *) (GENLMSG_DATA(&msg) + len);
+		}
+	} while (loop);
+done:
+	if (maskset) {
+		rc = send_cmd(nl_sd, id, mypid, TASKSTATS_CMD_GET,
+			      TASKSTATS_CMD_ATTR_DEREGISTER_CPUMASK,
+			      &cpumask, sizeof(cpumask));
+		printf("Sent deregister mask, retval %d\n", rc);
+		if (rc < 0)
+			err(rc, "error sending deregister cpumask\n");
+	}
+err:
+	close(nl_sd);
+	if (fd)
+		close(fd);
+	return 0;
+}

Documentation/accounting/taskstats.txt

@@ -0,0 +1,181 @@
+Per-task statistics interface
+-----------------------------
+
+
+Taskstats is a netlink-based interface for sending per-task and
+per-process statistics from the kernel to userspace.
+
+Taskstats was designed for the following benefits:
+
+- efficiently provide statistics during lifetime of a task and on its exit
+- unified interface for multiple accounting subsystems
+- extensibility for use by future accounting patches
+
+Terminology
+-----------
+
+"pid", "tid" and "task" are used interchangeably and refer to the standard
+Linux task defined by struct task_struct.  per-pid stats are the same as
+per-task stats.
+
+"tgid", "process" and "thread group" are used interchangeably and refer to the
+tasks that share an mm_struct i.e. the traditional Unix process. Despite the
+use of tgid, there is no special treatment for the task that is thread group
+leader - a process is deemed alive as long as it has any task belonging to it.
+
+Usage
+-----
+
+To get statistics during a task's lifetime, userspace opens a unicast netlink
+socket (NETLINK_GENERIC family) and sends commands specifying a pid or a tgid.
+The response contains statistics for a task (if pid is specified) or the sum of
+statistics for all tasks of the process (if tgid is specified).
+
+To obtain statistics for tasks which are exiting, the userspace listener
+sends a register command and specifies a cpumask. Whenever a task exits on
+one of the cpus in the cpumask, its per-pid statistics are sent to the
+registered listener. Using cpumasks allows the data received by one listener
+to be limited and assists in flow control over the netlink interface and is
+explained in more detail below.
+
+If the exiting task is the last thread exiting its thread group,
+an additional record containing the per-tgid stats is also sent to userspace.
+The latter contains the sum of per-pid stats for all threads in the thread
+group, both past and present.
+
+getdelays.c is a simple utility demonstrating usage of the taskstats interface
+for reporting delay accounting statistics. Users can register cpumasks,
+send commands and process responses, listen for per-tid/tgid exit data,
+write the data received to a file and do basic flow control by increasing
+receive buffer sizes.
+
+Interface
+---------
+
+The user-kernel interface is encapsulated in include/linux/taskstats.h
+
+To avoid this documentation becoming obsolete as the interface evolves, only
+an outline of the current version is given. taskstats.h always overrides the
+description here.
+
+struct taskstats is the common accounting structure for both per-pid and
+per-tgid data. It is versioned and can be extended by each accounting subsystem
+that is added to the kernel. The fields and their semantics are defined in the
+taskstats.h file.
+
+The data exchanged between user and kernel space is a netlink message belonging
+to the NETLINK_GENERIC family and using the netlink attributes interface.
+The messages are in the format
+
+    +----------+- - -+-------------+-------------------+
+    | nlmsghdr | Pad |  genlmsghdr | taskstats payload |
+    +----------+- - -+-------------+-------------------+
+
+
+The taskstats payload is one of the following three kinds:
+
+1. Commands: Sent from user to kernel. Commands to get data on
+a pid/tgid consist of one attribute, of type TASKSTATS_CMD_ATTR_PID/TGID,
+containing a u32 pid or tgid in the attribute payload. The pid/tgid denotes
+the task/process for which userspace wants statistics.
+
+Commands to register/deregister interest in exit data from a set of cpus
+consist of one attribute, of type
+TASKSTATS_CMD_ATTR_REGISTER/DEREGISTER_CPUMASK and contain a cpumask in the
+attribute payload. The cpumask is specified as an ascii string of
+comma-separated cpu ranges e.g. to listen to exit data from cpus 1,2,3,5,7,8
+the cpumask would be "1-3,5,7-8". If userspace forgets to deregister interest
+in cpus before closing the listening socket, the kernel cleans up its interest
+set over time. However, for the sake of efficiency, an explicit deregistration
+is advisable.
+
+2. Response for a command: sent from the kernel in response to a userspace
+command. The payload is a series of three attributes of type:
+
+a) TASKSTATS_TYPE_AGGR_PID/TGID : attribute containing no payload but indicates
+a pid/tgid will be followed by some stats.
+
+b) TASKSTATS_TYPE_PID/TGID: attribute whose payload is the pid/tgid whose stats
+is being returned.
+
+c) TASKSTATS_TYPE_STATS: attribute with a struct taskstsats as payload. The
+same structure is used for both per-pid and per-tgid stats.
+
+3. New message sent by kernel whenever a task exits. The payload consists of a
+   series of attributes of the following type:
+
+a) TASKSTATS_TYPE_AGGR_PID: indicates next two attributes will be pid+stats
+b) TASKSTATS_TYPE_PID: contains exiting task's pid
+c) TASKSTATS_TYPE_STATS: contains the exiting task's per-pid stats
+d) TASKSTATS_TYPE_AGGR_TGID: indicates next two attributes will be tgid+stats
+e) TASKSTATS_TYPE_TGID: contains tgid of process to which task belongs
+f) TASKSTATS_TYPE_STATS: contains the per-tgid stats for exiting task's process
+
+
+per-tgid stats
+--------------
+
+Taskstats provides per-process stats, in addition to per-task stats, since
+resource management is often done at a process granularity and aggregating task
+stats in userspace alone is inefficient and potentially inaccurate (due to lack
+of atomicity).
+
+However, maintaining per-process, in addition to per-task stats, within the
+kernel has space and time overheads. To address this, the taskstats code
+accumalates each exiting task's statistics into a process-wide data structure.
+When the last task of a process exits, the process level data accumalated also
+gets sent to userspace (along with the per-task data).
+
+When a user queries to get per-tgid data, the sum of all other live threads in
+the group is added up and added to the accumalated total for previously exited
+threads of the same thread group.
+
+Extending taskstats
+-------------------
+
+There are two ways to extend the taskstats interface to export more
+per-task/process stats as patches to collect them get added to the kernel
+in future:
+
+1. Adding more fields to the end of the existing struct taskstats. Backward
+   compatibility is ensured by the version number within the
+   structure. Userspace will use only the fields of the struct that correspond
+   to the version its using.
+
+2. Defining separate statistic structs and using the netlink attributes
+   interface to return them. Since userspace processes each netlink attribute
+   independently, it can always ignore attributes whose type it does not
+   understand (because it is using an older version of the interface).
+
+
+Choosing between 1. and 2. is a matter of trading off flexibility and
+overhead. If only a few fields need to be added, then 1. is the preferable
+path since the kernel and userspace don't need to incur the overhead of
+processing new netlink attributes. But if the new fields expand the existing
+struct too much, requiring disparate userspace accounting utilities to
+unnecessarily receive large structures whose fields are of no interest, then
+extending the attributes structure would be worthwhile.
+
+Flow control for taskstats
+--------------------------
+
+When the rate of task exits becomes large, a listener may not be able to keep
+up with the kernel's rate of sending per-tid/tgid exit data leading to data
+loss. This possibility gets compounded when the taskstats structure gets
+extended and the number of cpus grows large.
+
+To avoid losing statistics, userspace should do one or more of the following:
+
+- increase the receive buffer sizes for the netlink sockets opened by
+listeners to receive exit data.
+
+- create more listeners and reduce the number of cpus being listened to by
+each listener. In the extreme case, there could be one listener for each cpu.
+Users may also consider setting the cpu affinity of the listener to the subset
+of cpus to which it listens, especially if they are listening to just one cpu.
+
+Despite these measures, if the userspace receives ENOBUFS error messages
+indicated overflow of receive buffers, it should take measures to handle the
+loss of data.
+
+----

Documentation/drivers/edac/edac.txt

@@ -35,15 +35,14 @@ the vendor should tie the parity status bits to 0 if they do not intend
 to generate parity.  Some vendors do not do this, and thus the parity bit
 can "float" giving false positives.
 
-The PCI Parity EDAC device has the ability to "skip" known flaky
-cards during the parity scan. These are set by the parity "blacklist"
-interface in the sysfs for PCI Parity. (See the PCI section in the sysfs
-section below.) There is also a parity "whitelist" which is used as
-an explicit list of devices to scan, while the blacklist is a list
-of devices to skip.
+[There are patches in the kernel queue which will allow for storage of
+quirks of PCI devices reporting false parity positives. The 2.6.18
+kernel should have those patches included. When that becomes available,
+then EDAC will be patched to utilize that information to "skip" such
+devices.]
 
-EDAC will have future error detectors that will be added or integrated
-into EDAC in the following list:
+EDAC will have future error detectors that will be integrated with
+EDAC or added to it, in the following list:
 
 	MCE	Machine Check Exception
 	MCA	Machine Check Architecture
@@ -93,22 +92,24 @@ EDAC lives in the /sys/devices/system/edac directory. Within this directory
 there currently reside 2 'edac' components:
 
 	mc	memory controller(s) system
-	pci	PCI status system
+	pci	PCI control and status system
 
 
 ============================================================================
 Memory Controller (mc) Model
 
 First a background on the memory controller's model abstracted in EDAC.
-Each mc device controls a set of DIMM memory modules. These modules are
+Each 'mc' device controls a set of DIMM memory modules. These modules are
 laid out in a Chip-Select Row (csrowX) and Channel table (chX). There can
-be multiple csrows and two channels.
+be multiple csrows and multiple channels.
 
 Memory controllers allow for several csrows, with 8 csrows being a typical value.
 Yet, the actual number of csrows depends on the electrical "loading"
 of a given motherboard, memory controller and DIMM characteristics.
 
 Dual channels allows for 128 bit data transfers to the CPU from memory.
+Some newer chipsets allow for more than 2 channels, like Fully Buffered DIMMs
+(FB-DIMMs). The following example will assume 2 channels:
 
 
 		Channel 0	Channel 1
@@ -234,23 +235,15 @@ Polling period control file:
 	The time period, in milliseconds, for polling for error information.
 	Too small a value wastes resources.  Too large a value might delay
 	necessary handling of errors and might loose valuable information for
-	locating the error.  1000 milliseconds (once each second) is about
-	right for most uses.
+	locating the error.  1000 milliseconds (once each second) is the current
+	default. Systems which require all the bandwidth they can get, may
+	increase this.
 
 	LOAD TIME: module/kernel parameter: poll_msec=[0|1]
 
 	RUN TIME: echo "1000" >/sys/devices/system/edac/mc/poll_msec
 
 
-Module Version read-only attribute file:
-
-	'mc_version'
-
-	The EDAC CORE module's version and compile date are shown here to
-	indicate what EDAC is running.
-
-
-
 ============================================================================
 'mcX' DIRECTORIES
 
@@ -284,35 +277,6 @@ Seconds since last counter reset control file:
 
 
 
-DIMM capability attribute file:
-
-	'edac_capability'
-
-	The EDAC (Error Detection and Correction) capabilities/modes of
-	the memory controller hardware.
-
-
-DIMM Current Capability attribute file:
-
-	'edac_current_capability'
-
-	The EDAC capabilities available with the hardware
-	configuration.  This may not be the same as "EDAC capability"
-	if the correct memory is not used.  If a memory controller is
-	capable of EDAC, but DIMMs without check bits are in use, then
-	Parity, SECDED, S4ECD4ED capabilities will not be available
-	even though the memory controller might be capable of those
-	modes with the proper memory loaded.
-
-
-Memory Type supported on this controller attribute file:
-
-	'supported_mem_type'
-
-	This attribute file displays the memory type, usually
-	buffered and unbuffered DIMMs.
-
-
 Memory Controller name attribute file:
 
 	'mc_name'
@@ -321,16 +285,6 @@ Memory Controller name attribute file:
 	that is being utilized.
 
 
-Memory Controller Module name attribute file:
-
-	'module_name'
-
-	This attribute file displays the memory controller module name,
-	version and date built.  The name of the memory controller
-	hardware - some drivers work with multiple controllers and
-	this field shows which hardware is present.
-
-
 Total memory managed by this memory controller attribute file:
 
 	'size_mb'
@@ -432,6 +386,9 @@ Memory Type attribute file:
 
 	This attribute file will display what type of memory is currently
 	on this csrow. Normally, either buffered or unbuffered memory.
+	Examples:
+		Registered-DDR
+		Unbuffered-DDR
 
 
 EDAC Mode of operation attribute file:
@@ -446,8 +403,13 @@ Device type attribute file:
 
 	'dev_type'
 
-	This attribute file will display what type of DIMM device is
-	being utilized. Example:  x4
+	This attribute file will display what type of DRAM device is
+	being utilized on this DIMM.
+	Examples:
+		x1
+		x2
+		x4
+		x8
 
 
 Channel 0 CE Count attribute file:
@@ -522,10 +484,10 @@ SYSTEM LOGGING
 If logging for UEs and CEs are enabled then system logs will have
 error notices indicating errors that have been detected:
 
-MC0: CE page 0x283, offset 0xce0, grain 8, syndrome 0x6ec3, row 0,
+EDAC MC0: CE page 0x283, offset 0xce0, grain 8, syndrome 0x6ec3, row 0,
 channel 1 "DIMM_B1": amd76x_edac
 
-MC0: CE page 0x1e5, offset 0xfb0, grain 8, syndrome 0xb741, row 0,
+EDAC MC0: CE page 0x1e5, offset 0xfb0, grain 8, syndrome 0xb741, row 0,
 channel 1 "DIMM_B1": amd76x_edac
 
 
@@ -610,64 +572,4 @@ Parity Count:
 
 
 
-PCI Device Whitelist:
-
-	'pci_parity_whitelist'
-
-	This control file allows for an explicit list of PCI devices to be
-	scanned for parity errors. Only devices found on this list will
-	be examined.  The list is a line of hexadecimal VENDOR and DEVICE
-	ID tuples:
-
-	1022:7450,1434:16a6
-
-	One or more can be inserted, separated by a comma.
-
-	To write the above list doing the following as one command line:
-
-	echo "1022:7450,1434:16a6"
-		> /sys/devices/system/edac/pci/pci_parity_whitelist
-
-
-
-	To display what the whitelist is, simply 'cat' the same file.
-
-
-PCI Device Blacklist:
-
-	'pci_parity_blacklist'
-
-	This control file allows for a list of PCI devices to be
-	skipped for scanning.
-	The list is a line of hexadecimal VENDOR and DEVICE ID tuples:
-
-	1022:7450,1434:16a6
-
-	One or more can be inserted, separated by a comma.
-
-	To write the above list doing the following as one command line:
-
-	echo "1022:7450,1434:16a6"
-		> /sys/devices/system/edac/pci/pci_parity_blacklist
-
-
-	To display what the whitelist currently contains,
-	simply 'cat' the same file.
-
 =======================================================================
-
-PCI Vendor and Devices IDs can be obtained with the lspci command. Using
-the -n option lspci will display the vendor and device IDs. The system
-administrator will have to determine which devices should be scanned or
-skipped.
-
-
-
-The two lists (white and black) are prioritized. blacklist is the lower
-priority and will NOT be utilized when a whitelist has been set.
-Turn OFF a whitelist by an empty echo command:
-
-	echo > /sys/devices/system/edac/pci/pci_parity_whitelist
-
-and any previous blacklist will be utilized.
-

Documentation/feature-removal-schedule.txt

@@ -55,14 +55,6 @@ Who:	Mauro Carvalho Chehab <mchehab@brturbo.com.br>
 
 ---------------------------
 
-What:	remove EXPORT_SYMBOL(insert_resource)
-When:	April 2006
-Files:	kernel/resource.c
-Why:	No modular usage in the kernel.
-Who:	Adrian Bunk <bunk@stusta.de>
-
----------------------------
-
 What:	PCMCIA control ioctl (needed for pcmcia-cs [cardmgr, cardctl])
 When:	November 2005
 Files:	drivers/pcmcia/: pcmcia_ioctl.c
@@ -166,17 +158,6 @@ Who:	Arjan van de Ven <arjan@linux.intel.com>
 
 ---------------------------
 
-What:	remove EXPORT_SYMBOL(tasklist_lock)
-When:	August 2006
-Files:	kernel/fork.c
-Why:	tasklist_lock protects the kernel internal task list.  Modules have
-	no business looking at it, and all instances in drivers have been due
-	to use of too-lowlevel APIs.  Having this symbol exported prevents
-	moving to more scalable locking schemes for the task list.
-Who:	Christoph Hellwig <hch@lst.de>
-
----------------------------
-
 What:	mount/umount uevents
 When:	February 2007
 Why:	These events are not correct, and do not properly let userspace know
@@ -266,3 +247,14 @@ Why:	The interrupt related SA_* flags are replaced by IRQF_* to move them
 Who:	Thomas Gleixner <tglx@linutronix.de>
 
 ---------------------------
+
+What:	i2c-ite and i2c-algo-ite drivers
+When:	September 2006
+Why:	These drivers never compiled since they were added to the kernel
+	tree 5 years ago. This feature removal can be reevaluated if
+	someone shows interest in the drivers, fixes them and takes over
+	maintenance.
+	http://marc.theaimsgroup.com/?l=linux-mips&m=115040510817448
+Who:	Jean Delvare <khali@linux-fr.org>
+
+---------------------------

Documentation/filesystems/Locking

@@ -142,8 +142,8 @@ see also dquot_operations section.
 
 --------------------------- file_system_type ---------------------------
 prototypes:
-	struct int (*get_sb) (struct file_system_type *, int,
-			const char *, void *, struct vfsmount *);
+	int (*get_sb) (struct file_system_type *, int,
+		       const char *, void *, struct vfsmount *);
 	void (*kill_sb) (struct super_block *);
 locking rules:
 		may block	BKL

Documentation/filesystems/vfs.txt

@@ -113,8 +113,8 @@ members are defined:
 struct file_system_type {
 	const char *name;
 	int fs_flags;
-        struct int (*get_sb) (struct file_system_type *, int,
-                              const char *, void *, struct vfsmount *);
+        int (*get_sb) (struct file_system_type *, int,
+                       const char *, void *, struct vfsmount *);
         void (*kill_sb) (struct super_block *);
         struct module *owner;
         struct file_system_type * next;

Documentation/hwmon/abituguru

@@ -2,13 +2,36 @@ Kernel driver abituguru
 =======================
 
 Supported chips:
-  * Abit uGuru (Hardware Monitor part only)
+  * Abit uGuru revision 1-3 (Hardware Monitor part only)
     Prefix: 'abituguru'
     Addresses scanned: ISA 0x0E0
     Datasheet: Not available, this driver is based on reverse engineering.
 	A "Datasheet" has been written based on the reverse engineering it
 	should be available in the same dir as this file under the name
 	abituguru-datasheet.
+    Note:
+	The uGuru is a microcontroller with onboard firmware which programs
+	it to behave as a hwmon IC. There are many different revisions of the
+	firmware and thus effectivly many different revisions of the uGuru.
+	Below is an incomplete list with which revisions are used for which
+	Motherboards:
+	uGuru 1.00    ~ 1.24    (AI7, KV8-MAX3, AN7) (1)
+	uGuru 2.0.0.0 ~ 2.0.4.2 (KV8-PRO)
+	uGuru 2.1.0.0 ~ 2.1.2.8 (AS8, AV8, AA8, AG8, AA8XE, AX8)
+	uGuru 2.2.0.0 ~ 2.2.0.6 (AA8 Fatal1ty)
+	uGuru 2.3.0.0 ~ 2.3.0.9 (AN8)
+	uGuru 3.0.0.0 ~ 3.0.1.2 (AW8, AL8, NI8)
+	uGuru 4.xxxxx?          (AT8 32X) (2)
+	1) For revisions 2 and 3 uGuru's the driver can autodetect the
+	   sensortype (Volt or Temp) for bank1 sensors, for revision 1 uGuru's
+	   this doesnot always work. For these uGuru's the autodection can
+	   be overriden with the bank1_types module param. For all 3 known
+	   revison 1 motherboards the correct use of this param is:
+	   bank1_types=1,1,0,0,0,0,0,2,0,0,0,0,2,0,0,1
+	   You may also need to specify the fan_sensors option for these boards
+	   fan_sensors=5
+	2) The current version of the abituguru driver is known to NOT work
+	   on these Motherboards
 
 Authors:
 	Hans de Goede <j.w.r.degoede@hhs.nl>,
@@ -22,6 +45,11 @@ Module Parameters
 * force: bool		Force detection. Note this parameter only causes the
 			detection to be skipped, if the uGuru can't be read
 			the module initialization (insmod) will still fail.
+* bank1_types: int[]	Bank1 sensortype autodetection override:
+			  -1 autodetect (default)
+			   0 volt sensor
+			   1 temp sensor
+			   2 not connected
 * fan_sensors: int	Tell the driver how many fan speed sensors there are
 			on your motherboard. Default: 0 (autodetect).
 * pwms: int		Tell the driver how many fan speed controls (fan
@@ -29,7 +57,7 @@ Module Parameters
 * verbose: int		How verbose should the driver be? (0-3):
 			   0 normal output
 			   1 + verbose error reporting
-			   2 + sensors type probing info\n"
+			   2 + sensors type probing info (default)
 			   3 + retryable error reporting
 			Default: 2 (the driver is still in the testing phase)
 

Documentation/i2c/busses/i2c-sis96x

@@ -42,8 +42,8 @@ I suspect that this driver could be made to work for the following SiS
 chipsets as well: 635, and 635T. If anyone owns a board with those chips
 AND is willing to risk crashing & burning an otherwise well-behaved kernel
 in the name of progress... please contact me at <mhoffman@lightlink.com> or
-via the project's mailing list: <lm-sensors@lm-sensors.org>.  Please
-send bug reports and/or success stories as well.
+via the project's mailing list: <i2c@lm-sensors.org>.  Please send bug
+reports and/or success stories as well.
 
 
 TO DOs

Documentation/kernel-parameters.txt

@@ -448,6 +448,8 @@ running once the system is up.
 			Format: <area>[,<node>]
 			See also Documentation/networking/decnet.txt.
 
+	delayacct	[KNL] Enable per-task delay accounting
+
 	dhash_entries=	[KNL]
 			Set number of hash buckets for dentry cache.
 

Documentation/memory-barriers.txt

@@ -1015,10 +1015,9 @@ CPU from reordering them.
 There are some more advanced barrier functions:
 
  (*) set_mb(var, value)
- (*) set_wmb(var, value)
 
-     These assign the value to the variable and then insert at least a write
-     barrier after it, depending on the function.  They aren't guaranteed to
+     This assigns the value to the variable and then inserts at least a write
+     barrier after it, depending on the function.  It isn't guaranteed to
      insert anything more than a compiler barrier in a UP compilation.
 
 

Documentation/mips/time.README

@@ -65,7 +65,7 @@ the following functions or values:
 	1. (optional) set up RTC routines
 	2. (optional) calibrate and set the mips_counter_frequency
 
-  b) board_timer_setup - a function pointer.  Invoked at the end of time_init()
+  b) plat_timer_setup - a function pointer.  Invoked at the end of time_init()
 	1. (optional) over-ride any decisions made in time_init()
 	2. set up the irqaction for timer interrupt.
 	3. enable the timer interrupt
@@ -116,19 +116,17 @@ Step 2:  the machine setup() function
 
   If you supply board_time_init(), set the function poointer.
 
-  Set the function pointer board_timer_setup() (mandatory)
 
-
-Step 3: implement rtc routines, board_time_init() and board_timer_setup()
+Step 3: implement rtc routines, board_time_init() and plat_timer_setup()
   if needed.
 
-  board_time_init() - 
+  board_time_init() -
   	a) (optional) set up RTC routines, 
         b) (optional) calibrate and set the mips_counter_frequency
  	    (only needed if you intended to use fixed_rate_gettimeoffset
  	     or use cpu counter as timer interrupt source)
 
-  board_timer_setup() - 
+  plat_timer_setup() -
  	a) (optional) over-write any choices made above by time_init().
  	b) machine specific code should setup the timer irqaction.
  	c) enable the timer interrupt

Documentation/nfsroot.txt

@@ -4,15 +4,16 @@ Mounting the root filesystem via NFS (nfsroot)
 Written 1996 by Gero Kuhlmann <gero@gkminix.han.de>
 Updated 1997 by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
 Updated 2006 by Nico Schottelius <nico-kernel-nfsroot@schottelius.org>
+Updated 2006 by Horms <horms@verge.net.au>
 
 
 
-If you want to use a diskless system, as an X-terminal or printer
-server for example, you have to put your root filesystem onto a
-non-disk device. This can either be a ramdisk (see initrd.txt in
-this directory for further information) or a filesystem mounted
-via NFS. The following text describes on how to use NFS for the
-root filesystem. For the rest of this text 'client' means the
+In order to use a diskless system, such as an X-terminal or printer server
+for example, it is necessary for the root filesystem to be present on a
+non-disk device. This may be an initramfs (see Documentation/filesystems/
+ramfs-rootfs-initramfs.txt), a ramdisk (see Documenation/initrd.txt) or a
+filesystem mounted via NFS. The following text describes on how to use NFS
+for the root filesystem. For the rest of this text 'client' means the
 diskless system, and 'server' means the NFS server.
 
 
@@ -21,11 +22,13 @@ diskless system, and 'server' means the NFS server.
 1.) Enabling nfsroot capabilities
     -----------------------------
 
-In order to use nfsroot you have to select support for NFS during
-kernel configuration. Note that NFS cannot be loaded as a module
-in this case. The configuration script will then ask you whether
-you want to use nfsroot, and if yes what kind of auto configuration
-system you want to use. Selecting both BOOTP and RARP is safe.
+In order to use nfsroot, NFS client support needs to be selected as
+built-in during configuration. Once this has been selected, the nfsroot
+option will become available, which should also be selected.
+
+In the networking options, kernel level autoconfiguration can be selected,
+along with the types of autoconfiguration to support. Selecting all of
+DHCP, BOOTP and RARP is safe.
 
 
 
@@ -33,11 +36,10 @@ system you want to use. Selecting both BOOTP and RARP is safe.
 2.) Kernel command line
     -------------------
 
-When the kernel has been loaded by a boot loader (either by loadlin,
-LILO or a network boot program) it has to be told what root fs device
-to use, and where to find the server and the name of the directory
-on the server to mount as root. This can be established by a couple
-of kernel command line parameters:
+When the kernel has been loaded by a boot loader (see below) it needs to be
+told what root fs device to use. And in the case of nfsroot, where to find
+both the server and the name of the directory on the server to mount as root.
+This can be established using the following kernel command line parameters:
 
 
 root=/dev/nfs
@@ -49,23 +51,21 @@ root=/dev/nfs
 
 nfsroot=[<server-ip>:]<root-dir>[,<nfs-options>]
 
-  If the `nfsroot' parameter is NOT given on the command line, the default
-  "/tftpboot/%s" will be used.
+  If the `nfsroot' parameter is NOT given on the command line,
+  the default "/tftpboot/%s" will be used.
 
-  <server-ip>	Specifies the IP address of the NFS server. If this field
-		is not given, the default address as determined by the
-		`ip' variable (see below) is used. One use of this
-		parameter is for example to allow using different servers
-		for RARP and NFS. Usually you can leave this blank.
+  <server-ip>	Specifies the IP address of the NFS server.
+		The default address is determined by the `ip' parameter
+		(see below). This parameter allows the use of different
+		servers for IP autoconfiguration and NFS.
 
-  <root-dir>	Name of the directory on the server to mount as root. If
-		there is a "%s" token in the string, the token will be
-		replaced by the ASCII-representation of the client's IP
-		address.
+  <root-dir>	Name of the directory on the server to mount as root.
+		If there is a "%s" token in the string, it will be
+		replaced by the ASCII-representation of the client's
+		IP address.
 
   <nfs-options>	Standard NFS options. All options are separated by commas.
-		If the options field is not given, the following defaults
-		will be used:
+		The following defaults are used:
 			port		= as given by server portmap daemon
 			rsize		= 1024
 			wsize		= 1024
@@ -81,129 +81,174 @@ nfsroot=[<server-ip>:]<root-dir>[,<nfs-options>]
 ip=<client-ip>:<server-ip>:<gw-ip>:<netmask>:<hostname>:<device>:<autoconf>
 
   This parameter tells the kernel how to configure IP addresses of devices
-  and also how to set up the IP routing table. It was originally called `nfsaddrs',
-  but now the boot-time IP configuration works independently of NFS, so it
-  was renamed to `ip' and the old name remained as an alias for compatibility
-  reasons.
+  and also how to set up the IP routing table. It was originally called
+  `nfsaddrs', but now the boot-time IP configuration works independently of
+  NFS, so it was renamed to `ip' and the old name remained as an alias for
+  compatibility reasons.
 
   If this parameter is missing from the kernel command line, all fields are
   assumed to be empty, and the defaults mentioned below apply. In general
-  this means that the kernel tries to configure everything using both
-  RARP and BOOTP (depending on what has been enabled during kernel confi-
-  guration, and if both what protocol answer got in first).
-
-  <client-ip>	IP address of the client. If empty, the address will either
-		be determined by RARP or BOOTP. What protocol is used de-
-		pends on what has been enabled during kernel configuration
-		and on the <autoconf> parameter. If this parameter is not
-		empty, neither RARP nor BOOTP will be used.
-
-  <server-ip>	IP address of the NFS server. If RARP is used to determine
-		the client address and this parameter is NOT empty only
-		replies from the specified server are accepted. To use
-		different RARP and NFS server, specify your RARP server
-		here (or leave it blank), and specify your NFS server in
-		the `nfsroot' parameter (see above). If this entry is blank
-		the address of the server is used which answered the RARP
-		or BOOTP request.
-
-  <gw-ip>	IP address of a gateway if the server is on a different
-		subnet. If this entry is empty no gateway is used and the
-		server is assumed to be on the local network, unless a
-		value has been received by BOOTP.
-
-  <netmask>	Netmask for local network interface. If this is empty,
-		the netmask is derived from the client IP address assuming
-		classful addressing, unless overridden in BOOTP reply.
-
-  <hostname>	Name of the client. If empty, the client IP address is
-		used in ASCII notation, or the value received by BOOTP.
-
-  <device>	Name of network device to use. If this is empty, all
-		devices are used for RARP and BOOTP requests, and the
-		first one we receive a reply on is configured. If you have
-		only one device, you can safely leave this blank.
-
-  <autoconf>	Method to use for autoconfiguration. If this is either
-		'rarp' or 'bootp', the specified protocol is used.
-		If the value is 'both' or empty, both protocols are used
-		so far as they have been enabled during kernel configura-
-		tion. 'off' means no autoconfiguration.
+  this means that the kernel tries to configure everything using
+  autoconfiguration.
 
   The <autoconf> parameter can appear alone as the value to the `ip'
   parameter (without all the ':' characters before) in which case auto-
   configuration is used.
 
+  <client-ip>	IP address of the client.
+
+  		Default:  Determined using autoconfiguration.
+
+  <server-ip>	IP address of the NFS server. If RARP is used to determine
+		the client address and this parameter is NOT empty only
+		replies from the specified server are accepted.
+
+		Only required for for NFS root. That is autoconfiguration
+		will not be triggered if it is missing and NFS root is not
+		in operation.
+
+		Default: Determined using autoconfiguration.
+		         The address of the autoconfiguration server is used.
+
+  <gw-ip>	IP address of a gateway if the server is on a different subnet.
+
+		Default: Determined using autoconfiguration.
+
+  <netmask>	Netmask for local network interface. If unspecified
+		the netmask is derived from the client IP address assuming
+		classful addressing.
+
+		Default:  Determined using autoconfiguration.
+
+  <hostname>	Name of the client. May be supplied by autoconfiguration,
+  		but its absence will not trigger autoconfiguration.
+
+  		Default: Client IP address is used in ASCII notation.
+
+  <device>	Name of network device to use.
+
+		Default: If the host only has one device, it is used.
+			 Otherwise the device is determined using
+			 autoconfiguration. This is done by sending
+			 autoconfiguration requests out of all devices,
+			 and using the device that received the first reply.
+
+  <autoconf>	Method to use for autoconfiguration. In the case of options
+                which specify multiple autoconfiguration protocols,
+		requests are sent using all protocols, and the first one
+		to reply is used.
+
+		Only autoconfiguration protocols that have been compiled
+		into the kernel will be used, regardless of the value of
+		this option.
+
+                  off or none: don't use autoconfiguration (default)
+		  on or any:   use any protocol available in the kernel
+		  dhcp:        use DHCP
+		  bootp:       use BOOTP
+		  rarp:        use RARP
+		  both:        use both BOOTP and RARP but not DHCP
+		               (old option kept for backwards compatibility)
+
+                Default: any
 
 
 
-3.) Kernel loader
-    -------------
 
-To get the kernel into memory different approaches can be used. They
-depend on what facilities are available:
+3.) Boot Loader
+    ----------
+
+To get the kernel into memory different approaches can be used.
+They depend on various facilities being available:
 
 
-3.1)  Writing the kernel onto a floppy using dd:
-	As always you can just write the kernel onto a floppy using dd,
-	but then it's not possible to use kernel command lines at all.
-	To substitute the 'root=' parameter, create a dummy device on any
-	linux system with major number 0 and minor number 255 using mknod:
+3.1)  Booting from a floppy using syslinux
 
-		mknod /dev/boot255 c 0 255
+	When building kernels, an easy way to create a boot floppy that uses
+	syslinux is to use the zdisk or bzdisk make targets which use
+      	and bzimage images respectively. Both targets accept the
+     	FDARGS parameter which can be used to set the kernel command line.
 
-	Then copy the kernel zImage file onto a floppy using dd:
+	e.g.
+	   make bzdisk FDARGS="root=/dev/nfs"
 
-		dd if=/usr/src/linux/arch/i386/boot/zImage of=/dev/fd0
+   	Note that the user running this command will need to have
+     	access to the floppy drive device, /dev/fd0
 
-	And finally use rdev to set the root device:
+     	For more information on syslinux, including how to create bootdisks
+     	for prebuilt kernels, see http://syslinux.zytor.com/
 
-		rdev /dev/fd0 /dev/boot255
+	N.B: Previously it was possible to write a kernel directly to
+	     a floppy using dd, configure the boot device using rdev, and
+	     boot using the resulting floppy. Linux no longer supports this
+	     method of booting.
 
-	You can then remove the dummy device /dev/boot255 again. There
-	is no real device available for it.
-	The other two kernel command line parameters cannot be substi-
-	tuted with rdev. Therefore, using this method the kernel will
-	by default use RARP and/or BOOTP, and if it gets an answer via
-	RARP will mount the directory /tftpboot/<client-ip>/ as its
-	root. If it got a BOOTP answer the directory name in that answer
-	is used.
+3.2) Booting from a cdrom using isolinux
+
+     	When building kernels, an easy way to create a bootable cdrom that
+     	uses isolinux is to use the isoimage target which uses a bzimage
+     	image. Like zdisk and bzdisk, this target accepts the FDARGS
+     	parameter which can be used to set the kernel command line.
+
+	e.g.
+	  make isoimage FDARGS="root=/dev/nfs"
+
+     	The resulting iso image will be arch/<ARCH>/boot/image.iso
+     	This can be written to a cdrom using a variety of tools including
+     	cdrecord.
+
+	e.g.
+	  cdrecord dev=ATAPI:1,0,0 arch/i386/boot/image.iso
+
+     	For more information on isolinux, including how to create bootdisks
+     	for prebuilt kernels, see http://syslinux.zytor.com/
 
 3.2) Using LILO
-	When using LILO you can specify all necessary command line
-	parameters with the 'append=' command in the LILO configuration
-	file. However, to use the 'root=' command you also need to
-	set up a dummy device as described in 3.1 above. For how to use
-	LILO and its 'append=' command please refer to the LILO
-	documentation.
+	When using LILO all the necessary command line parameters may be
+	specified using the 'append=' directive in the LILO configuration
+	file.
+
+	However, to use the 'root=' directive you also need to create
+	a dummy root device, which may be removed after LILO is run.
+
+	mknod /dev/boot255 c 0 255
+
+	For information on configuring LILO, please refer to its documentation.
 
 3.3) Using GRUB
-	When you use GRUB, you simply append the parameters after the kernel
-	specification: "kernel <kernel> <parameters>" (without the quotes).
+	When using GRUB, kernel parameter are simply appended after the kernel
+	specification: kernel <kernel> <parameters>
 
 3.4) Using loadlin
-	When you want to boot Linux from a DOS command prompt without
-	having a local hard disk to mount as root, you can use loadlin.
-	I was told that it works, but haven't used it myself yet. In
-	general you should be able to create a kernel command line simi-
-	lar to how LILO is doing it. Please refer to the loadlin docu-
-	mentation for further information.
+	loadlin may be used to boot Linux from a DOS command prompt without
+	requiring a local hard disk to mount as root. This has not been
+	thoroughly tested by the authors of this document, but in general
+	it should be possible configure the kernel command line similarly
+	to the configuration of LILO.
+
+	Please refer to the loadlin documentation for further information.
 
 3.5) Using a boot ROM
-	This is probably the most elegant way of booting a diskless
-	client. With a boot ROM the kernel gets loaded using the TFTP
-	protocol. As far as I know, no commercial boot ROMs yet
-	support booting Linux over the network, but there are two
-	free implementations of a boot ROM available on sunsite.unc.edu
-	and its mirrors. They are called 'netboot-nfs' and 'etherboot'.
-	Both contain everything you need to boot a diskless Linux client.
+	This is probably the most elegant way of booting a diskless client.
+	With a boot ROM the kernel is loaded using the TFTP protocol. The
+	authors of this document are not aware of any no commercial boot
+	ROMs that support booting Linux over the network. However, there
+	are two free implementations of a boot ROM, netboot-nfs and
+	etherboot, both of which are available on sunsite.unc.edu, and both
+	of which contain everything you need to boot a diskless Linux client.
 
 3.6) Using pxelinux
-	Using pxelinux you specify the kernel you built with
+	Pxelinux may be used to boot linux using the PXE boot loader
+	which is present on many modern network cards.
+
+	When using pxelinux, the kernel image is specified using
 	"kernel <relative-path-below /tftpboot>". The nfsroot parameters
 	are passed to the kernel by adding them to the "append" line.
-	You may perhaps also want to fine tune the console output,
-	see Documentation/serial-console.txt for serial console help.
+	It is common to use serial console in conjunction with pxeliunx,
+	see Documentation/serial-console.txt for more information.
+
+	For more information on isolinux, including how to create bootdisks
+	for prebuilt kernels, see http://syslinux.zytor.com/
 
 
 

Documentation/ramdisk.txt

@@ -6,7 +6,7 @@ Contents:
 	1) Overview
 	2) Kernel Command Line Parameters
 	3) Using "rdev -r"
-	4) An Example of Creating a Compressed RAM Disk 
+	4) An Example of Creating a Compressed RAM Disk
 
 
 1) Overview
@@ -34,7 +34,7 @@ make it clearer.  The original "ramdisk=<ram_size>" has been kept around for
 compatibility reasons, but it may be removed in the future.
 
 The new RAM disk also has the ability to load compressed RAM disk images,
-allowing one to squeeze more programs onto an average installation or 
+allowing one to squeeze more programs onto an average installation or
 rescue floppy disk.
 
 
@@ -51,7 +51,7 @@ default is 4096 (4 MB) (8192 (8 MB) on S390).
 	===================
 
 This parameter tells the RAM disk driver how many bytes to use per block.  The
-default is 512.
+default is 1024 (BLOCK_SIZE).
 
 
 3) Using "rdev -r"
@@ -70,7 +70,7 @@ These numbers are no magical secrets, as seen below:
 ./arch/i386/kernel/setup.c:#define RAMDISK_PROMPT_FLAG          0x8000
 ./arch/i386/kernel/setup.c:#define RAMDISK_LOAD_FLAG            0x4000
 
-Consider a typical two floppy disk setup, where you will have the 
+Consider a typical two floppy disk setup, where you will have the
 kernel on disk one, and have already put a RAM disk image onto disk #2.
 
 Hence you want to set bits 0 to 13 as 0, meaning that your RAM disk
@@ -97,12 +97,12 @@ Since the default start = 0 and the default prompt = 1, you could use:
 	append = "load_ramdisk=1"
 
 
-4) An Example of Creating a Compressed RAM Disk 
+4) An Example of Creating a Compressed RAM Disk
 ----------------------------------------------
 
 To create a RAM disk image, you will need a spare block device to
 construct it on. This can be the RAM disk device itself, or an
-unused disk partition (such as an unmounted swap partition). For this 
+unused disk partition (such as an unmounted swap partition). For this
 example, we will use the RAM disk device, "/dev/ram0".
 
 Note: This technique should not be done on a machine with less than 8 MB

Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl

@@ -1172,7 +1172,7 @@
   }        
 
   /* PCI IDs */
-  static struct pci_device_id snd_mychip_ids[] __devinitdata = {
+  static struct pci_device_id snd_mychip_ids[] = {
           { PCI_VENDOR_ID_FOO, PCI_DEVICE_ID_BAR,
             PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
           ....
@@ -1565,7 +1565,7 @@
         <informalexample>
           <programlisting>
 <![CDATA[
-  static struct pci_device_id snd_mychip_ids[] __devinitdata = {
+  static struct pci_device_id snd_mychip_ids[] = {
           { PCI_VENDOR_ID_FOO, PCI_DEVICE_ID_BAR,
             PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0, },
           ....

Documentation/usb/usb-serial.txt

@@ -399,10 +399,10 @@ REINER SCT cyberJack pinpad/e-com USB chipcard reader
 
 Prolific PL2303 Driver
 
-  This driver support any device that has the PL2303 chip from Prolific
+  This driver supports any device that has the PL2303 chip from Prolific
   in it.  This includes a number of single port USB to serial
   converters and USB GPS devices.  Devices from Aten (the UC-232) and
-  IO-Data work with this driver.
+  IO-Data work with this driver, as does the DCU-11 mobile-phone cable.
 
   For any questions or problems with this driver, please contact Greg
   Kroah-Hartman at greg@kroah.com

MAINTAINERS

@@ -274,7 +274,7 @@ S:	Maintained
 ALI1563 I2C DRIVER
 P:	Rudolf Marek
 M:	r.marek@sh.cvut.cz
-L:	lm-sensors@lm-sensors.org
+L:	i2c@lm-sensors.org
 S:	Maintained
 
 ALPHA PORT
@@ -601,6 +601,15 @@ W:	http://linuxtv.org
 T:	git kernel.org:/pub/scm/linux/kernel/git/mchehab/v4l-dvb.git
 S:	Maintained
 
+CALGARY x86-64 IOMMU
+P:	Muli Ben-Yehuda
+M:	muli@il.ibm.com
+P:	Jon D. Mason
+M:	jdmason@us.ibm.com
+L:	linux-kernel@vger.kernel.org
+L:	discuss@x86-64.org
+S:	Maintained
+
 COMMON INTERNET FILE SYSTEM (CIFS)
 P:	Steve French
 M:	sfrench@samba.org
@@ -762,6 +771,7 @@ M:	aliakc@web.de
 P:	Jamie Lenehan
 M:	lenehan@twibble.org
 W:	http://twibble.org/dist/dc395x/
+L:	dc395x@twibble.org
 L:	http://lists.twibble.org/mailman/listinfo/dc395x/
 S:	Maintained
 
@@ -1240,7 +1250,7 @@ S:	Maintained
 I2C SUBSYSTEM
 P:	Jean Delvare
 M:	khali@linux-fr.org
-L:	lm-sensors@lm-sensors.org
+L:	i2c@lm-sensors.org
 W:	http://www.lm-sensors.nu/
 T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:	Maintained
@@ -1492,6 +1502,7 @@ P:	Yi Zhu
 M:	yi.zhu@intel.com
 P:	James Ketrenos
 M:	jketreno@linux.intel.com
+L:	ipw2100-devel@lists.sourceforge.net
 L:	http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
 W:	http://ipw2100.sourceforge.net
 S:	Supported
@@ -1501,6 +1512,7 @@ P:	Yi Zhu
 M:	yi.zhu@intel.com
 P:	James Ketrenos
 M:	jketreno@linux.intel.com
+L:	ipw2100-devel@lists.sourceforge.net
 L:	http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
 W:	http://ipw2200.sourceforge.net
 S:	Supported
@@ -2084,7 +2096,7 @@ S:      Maintained
 OPENCORES I2C BUS DRIVER
 P:	Peter Korsgaard
 M:	jacmet@sunsite.dk
-L:	lm-sensors@lm-sensors.org
+L:	i2c@lm-sensors.org
 S:	Maintained
 
 ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
@@ -2217,6 +2229,7 @@ S:	Maintained
 
 PCMCIA SUBSYSTEM
 P:	Linux PCMCIA Team
+L:	linux-pcmcia@lists.infradead.org
 L:	http://lists.infradead.org/mailman/listinfo/linux-pcmcia
 T:	git kernel.org:/pub/scm/linux/kernel/git/brodo/pcmcia-2.6.git
 S:	Maintained
@@ -2227,6 +2240,12 @@ M:	tsbogend@alpha.franken.de
 L:	netdev@vger.kernel.org
 S:	Maintained
 
+PER-TASK DELAY ACCOUNTING
+P:	Shailabh Nagar
+M:	nagar@watson.ibm.com
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+
 PERSONALITY HANDLING
 P:	Christoph Hellwig
 M:	hch@infradead.org
@@ -2666,6 +2685,11 @@ M:	shemminger@osdl.org
 L:	netdev@vger.kernel.org
 S:	Maintained
 
+SOEKRIS NET48XX LED SUPPORT
+P:	Chris Boot
+M:	bootc@bootc.net
+S:	Maintained
+
 SPARC (sparc32):
 P:	William L. Irwin
 M:	wli@holomorphy.com
@@ -2738,11 +2762,23 @@ P:	Christoph Hellwig
 M:	hch@infradead.org
 S:	Maintained
 
+TC CLASSIFIER
+P:	Jamal Hadi Salim
+M:	hadi@cyberus.ca
+L:	netdev@vger.kernel.org
+S:	Maintained
+
 TI OMAP RANDOM NUMBER GENERATOR SUPPORT
 P:	Deepak Saxena
 M:	dsaxena@plexity.net
 S:	Maintained
 
+TASKSTATS STATISTICS INTERFACE
+P:	Shailabh Nagar
+M:	nagar@watson.ibm.com
+L:	linux-kernel@vger.kernel.org
+S:	Maintained
+
 TI PARALLEL LINK CABLE DRIVER
 P:     Romain Lievin
 M:     roms@lpg.ticalc.org
@@ -3118,7 +3154,7 @@ S:	Maintained
 VIAPRO SMBUS DRIVER
 P:	Jean Delvare
 M:	khali@linux-fr.org
-L:	lm-sensors@lm-sensors.org
+L:	i2c@lm-sensors.org
 S:	Maintained
 
 UCLINUX (AND M68KNOMMU)
@@ -3166,6 +3202,11 @@ S:	Maintained
 W1 DALLAS'S 1-WIRE BUS
 P:	Evgeniy Polyakov
 M:	johnpol@2ka.mipt.ru
+S:	Maintained
+
+W83791D HARDWARE MONITORING DRIVER
+P:	Charles Spirakis
+M:	bezaur@gmail.com
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 

Makefile

@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 18
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME=Crazed Snow-Weasel
 
 # *DOCUMENTATION*

arch/alpha/kernel/alpha_ksyms.c

@@ -14,6 +14,7 @@
 #include <linux/in.h>
 #include <linux/in6.h>
 #include <linux/pci.h>
+#include <linux/screen_info.h>
 #include <linux/tty.h>
 #include <linux/mm.h>
 #include <linux/delay.h>

arch/alpha/kernel/process.c

@@ -25,6 +25,7 @@
 #include <linux/time.h>
 #include <linux/major.h>
 #include <linux/stat.h>
+#include <linux/vt.h>
 #include <linux/mman.h>
 #include <linux/elfcore.h>
 #include <linux/reboot.h>

arch/alpha/kernel/setup.c

@@ -19,7 +19,7 @@
 #include <linux/slab.h>
 #include <linux/user.h>
 #include <linux/a.out.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/delay.h>
 #include <linux/config.h>	/* CONFIG_ALPHA_LCA etc */
 #include <linux/mc146818rtc.h>

arch/alpha/kernel/sys_sio.c

@@ -16,7 +16,7 @@
 #include <linux/sched.h>
 #include <linux/pci.h>
 #include <linux/init.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 
 #include <asm/compiler.h>
 #include <asm/ptrace.h>

arch/arm/common/locomo.c

@@ -506,7 +506,7 @@ locomo_init_one_child(struct locomo *lchip, struct locomo_dev_info *info)
 		goto out;
 	}
 
-	strncpy(dev->dev.bus_id,info->name,sizeof(dev->dev.bus_id));
+	strncpy(dev->dev.bus_id, info->name, sizeof(dev->dev.bus_id));
 	/*
 	 * If the parent device has a DMA mask associated with it,
 	 * propagate it down to the children.
@@ -729,7 +729,6 @@ __locomo_probe(struct device *me, struct resource *mem, int irq)
 
 	for (i = 0; i < ARRAY_SIZE(locomo_devices); i++)
 		locomo_init_one_child(lchip, &locomo_devices[i]);
-
 	return 0;
 
  out:

arch/arm/common/sharpsl_pm.c

@@ -412,8 +412,10 @@ static int sharpsl_check_battery_temp(void)
 	val = get_select_val(buff);
 
 	dev_dbg(sharpsl_pm.dev, "Temperature: %d\n", val);
-	if (val > sharpsl_pm.machinfo->charge_on_temp)
+	if (val > sharpsl_pm.machinfo->charge_on_temp) {
+		printk(KERN_WARNING "Not charging: temperature out of limits.\n");
 		return -1;
+	}
 
 	return 0;
 }

arch/arm/configs/ep93xx_defconfig

@@ -1,14 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Wed Apr 19 21:21:01 2006
+# Linux kernel version: 2.6.18-rc1
+# Sun Jul  9 15:21:30 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -43,14 +47,15 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -83,18 +88,26 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 #
 # System Type
 #
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 CONFIG_ARCH_EP93XX=y
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP3XX is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
@@ -102,20 +115,18 @@ CONFIG_ARCH_EP93XX=y
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
 
 #
 # Cirrus EP93xx Implementation Options
 #
+CONFIG_CRUNCH=y
 
 #
 # EP93xx Platforms
 #
+CONFIG_MACH_EDB9302=y
+CONFIG_MACH_EDB9315=y
+CONFIG_MACH_EDB9315A=y
 CONFIG_MACH_GESBC9312=y
 CONFIG_MACH_TS72XX=y
 
@@ -166,6 +177,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -233,6 +245,8 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -240,6 +254,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -294,6 +309,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -386,6 +402,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1
 #
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_VERIFY_WRITE=y
+# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_TS7250=y
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
@@ -582,6 +600,7 @@ CONFIG_EP93XX_WATCHDOG=y
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
@@ -613,6 +632,7 @@ CONFIG_I2C_ALGOBIT=y
 #
 # I2C Hardware Bus support
 #
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_STUB is not set
 # CONFIG_I2C_PCA_ISA is not set
@@ -641,13 +661,13 @@ CONFIG_I2C_DEBUG_CHIP=y
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -675,8 +695,10 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
@@ -704,6 +726,7 @@ CONFIG_HWMON=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -714,6 +737,7 @@ CONFIG_HWMON=y
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -806,6 +830,7 @@ CONFIG_USB_SERIAL_CONSOLE=y
 # CONFIG_USB_SERIAL_GENERIC is not set
 # CONFIG_USB_SERIAL_AIRPRIME is not set
 # CONFIG_USB_SERIAL_ANYDATA is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
 # CONFIG_USB_SERIAL_BELKIN is not set
 # CONFIG_USB_SERIAL_WHITEHEAT is not set
 # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
@@ -833,6 +858,7 @@ CONFIG_USB_SERIAL_PL2303=y
 # CONFIG_USB_SERIAL_TI is not set
 # CONFIG_USB_SERIAL_CYBERJACK is not set
 # CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
 # CONFIG_USB_SERIAL_OMNINET is not set
 
 #
@@ -845,10 +871,12 @@ CONFIG_USB_SERIAL_PL2303=y
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TEST is not set
 
@@ -880,17 +908,24 @@ CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
 CONFIG_RTC_INTF_SYSFS=y
 CONFIG_RTC_INTF_PROC=y
 CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
 
 #
 # RTC drivers
 #
 # CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_RS5C372 is not set
 CONFIG_RTC_DRV_M48T86=y
 CONFIG_RTC_DRV_EP93XX=y
+# CONFIG_RTC_DRV_PL031 is not set
 # CONFIG_RTC_DRV_TEST is not set
+# CONFIG_RTC_DRV_V3020 is not set
 
 #
 # File systems
@@ -910,6 +945,7 @@ CONFIG_JBD=y
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -957,6 +993,7 @@ CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
 # CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -986,6 +1023,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1066,15 +1104,20 @@ CONFIG_NLS_ISO8859_1=y
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 CONFIG_DEBUG_SLAB=y
 # CONFIG_DEBUG_SLAB_LEAK is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
@@ -1114,3 +1157,4 @@ CONFIG_CRC32=y
 CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y

arch/arm/configs/ixp2000_defconfig

@@ -1,14 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Wed Apr 19 21:12:49 2006
+# Linux kernel version: 2.6.18-rc1
+# Sun Jul  9 15:28:50 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -43,14 +47,15 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -83,18 +88,26 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # System Type
 #
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP3XX is not set
 # CONFIG_ARCH_IXP4XX is not set
 CONFIG_ARCH_IXP2000=y
 # CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
@@ -102,12 +115,6 @@ CONFIG_ARCH_IXP2000=y
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
 
 #
@@ -171,6 +178,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -218,6 +226,8 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -236,6 +246,8 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -243,6 +255,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -297,6 +310,7 @@ CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -525,6 +539,7 @@ CONFIG_ENP2611_MSF_NET=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -542,7 +557,6 @@ CONFIG_ENP2611_MSF_NET=y
 CONFIG_WAN=y
 # CONFIG_DSCC4 is not set
 # CONFIG_LANMEDIA is not set
-# CONFIG_SYNCLINK_SYNCPPP is not set
 CONFIG_HDLC=y
 CONFIG_HDLC_RAW=y
 # CONFIG_HDLC_RAW_ETH is not set
@@ -654,6 +668,7 @@ CONFIG_IXP2000_WATCHDOG=y
 #
 # CONFIG_PCIPCWATCHDOG is not set
 # CONFIG_WDTPCI is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
@@ -697,6 +712,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_PIIX4 is not set
 CONFIG_I2C_IXP2000=y
 # CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
@@ -733,13 +749,13 @@ CONFIG_SENSORS_EEPROM=y
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -768,10 +784,12 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
@@ -799,6 +817,7 @@ CONFIG_HWMON=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -808,6 +827,7 @@ CONFIG_HWMON=y
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -866,6 +886,7 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -910,6 +931,7 @@ CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
 # CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -939,6 +961,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -980,14 +1003,19 @@ CONFIG_MSDOS_PARTITION=y
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
@@ -1027,3 +1055,4 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y

arch/arm/configs/ixp23xx_defconfig

@@ -1,14 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-rc2
-# Wed Apr 19 21:13:50 2006
+# Linux kernel version: 2.6.18-rc1
+# Sun Jul  9 14:13:35 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -43,14 +47,15 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
-CONFIG_OBSOLETE_INTERMODULE=y
 
 #
 # Loadable module support
@@ -83,18 +88,26 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # System Type
 #
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP3XX is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_IXP2000 is not set
 CONFIG_ARCH_IXP23XX=y
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
@@ -102,12 +115,6 @@ CONFIG_ARCH_IXP23XX=y
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_AT91RM9200 is not set
 CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
 
 #
@@ -165,6 +172,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_RESOURCES_64BIT=y
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -212,6 +220,8 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_PACKET_MMAP=y
 CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -230,6 +240,8 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
 # CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -237,6 +249,7 @@ CONFIG_TCP_CONG_BIC=y
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
+# CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 
 #
@@ -291,6 +304,7 @@ CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -520,6 +534,7 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_MEGARAID_LEGACY is not set
 # CONFIG_MEGARAID_SAS is not set
 # CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_HPTIOP is not set
 # CONFIG_SCSI_DMX3191D is not set
 # CONFIG_SCSI_FUTURE_DOMAIN is not set
 # CONFIG_SCSI_IPS is not set
@@ -641,6 +656,7 @@ CONFIG_E1000_NAPI=y
 # CONFIG_CHELSIO_T1 is not set
 # CONFIG_IXGB is not set
 # CONFIG_S2IO is not set
+# CONFIG_MYRI10GE is not set
 
 #
 # Token Ring devices
@@ -658,7 +674,6 @@ CONFIG_E1000_NAPI=y
 CONFIG_WAN=y
 # CONFIG_DSCC4 is not set
 # CONFIG_LANMEDIA is not set
-# CONFIG_SYNCLINK_SYNCPPP is not set
 CONFIG_HDLC=y
 CONFIG_HDLC_RAW=y
 # CONFIG_HDLC_RAW_ETH is not set
@@ -775,6 +790,7 @@ CONFIG_WATCHDOG=y
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
@@ -817,6 +833,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_I810 is not set
 # CONFIG_I2C_PIIX4 is not set
 # CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
@@ -853,13 +870,13 @@ CONFIG_SENSORS_EEPROM=y
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
 # CONFIG_SENSORS_ADM1026 is not set
@@ -888,10 +905,12 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_PC87360 is not set
 # CONFIG_SENSORS_SIS5595 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT8231 is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
 # CONFIG_SENSORS_W83792D is not set
 # CONFIG_SENSORS_W83L785TS is not set
 # CONFIG_SENSORS_W83627HF is not set
@@ -919,6 +938,7 @@ CONFIG_HWMON=y
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
+CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -929,6 +949,7 @@ CONFIG_HWMON=y
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -959,6 +980,7 @@ CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_SPLIT_ISO is not set
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_ISP116X_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN is not set
@@ -1050,10 +1072,12 @@ CONFIG_USB_MON=y
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
 # CONFIG_USB_LED is not set
+# CONFIG_USB_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
 # CONFIG_USB_PHIDGETKIT is not set
 # CONFIG_USB_PHIDGETSERVO is not set
 # CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 
@@ -1100,6 +1124,7 @@ CONFIG_FS_POSIX_ACL=y
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
 CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 CONFIG_DNOTIFY=y
 # CONFIG_AUTOFS_FS is not set
@@ -1146,6 +1171,7 @@ CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
 # CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -1175,6 +1201,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1255,14 +1282,19 @@ CONFIG_NLS_CODEPAGE_437=y
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
@@ -1302,3 +1334,4 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y

arch/arm/configs/lpd270_defconfig

@@ -1,15 +1,19 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-git2
-# Wed Jun 21 22:20:18 2006
+# Linux kernel version: 2.6.18-rc1
+# Sun Jul  9 14:15:23 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -43,10 +47,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -85,7 +91,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91RM9200 is not set
+# CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
@@ -117,6 +123,7 @@ CONFIG_MACH_LOGICPD_PXA270=y
 # CONFIG_MACH_MAINSTONE is not set
 # CONFIG_ARCH_PXA_IDP is not set
 # CONFIG_PXA_SHARPSL is not set
+# CONFIG_MACH_TRIZEPS4 is not set
 CONFIG_PXA27x=y
 CONFIG_IWMMXT=y
 
@@ -161,6 +168,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
 CONFIG_ALIGNMENT_TRAP=y
 
 #
@@ -194,8 +202,6 @@ CONFIG_BINFMT_ELF=y
 # Power management options
 #
 # CONFIG_PM is not set
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
 # CONFIG_APM is not set
 
 #
@@ -293,6 +299,7 @@ CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
+# CONFIG_SYS_HYPERVISOR is not set
 
 #
 # Connector - unified userspace <-> kernelspace linker
@@ -561,6 +568,7 @@ CONFIG_SERIO_LIBPS2=y
 CONFIG_VT=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
@@ -588,6 +596,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 # Watchdog Cards
 #
 # CONFIG_WATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
@@ -617,13 +626,13 @@ CONFIG_LEGACY_PTY_COUNT=256
 #
 # Dallas's 1-wire bus
 #
-# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
 #
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
@@ -658,12 +667,13 @@ CONFIG_VIDEO_V4L2=y
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 CONFIG_FB=y
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_MACMODES is not set
-CONFIG_FB_FIRMWARE_EDID=y
+# CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
 # CONFIG_FB_S1D13XXX is not set
@@ -822,6 +832,7 @@ CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
 # CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -849,6 +860,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -914,14 +926,19 @@ CONFIG_NLS_ISO8859_1=y
 #
 # CONFIG_PRINTK_TIME is not set
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
@@ -961,3 +978,4 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_PLIST=y

arch/arm/configs/onearm_defconfig

@@ -1,14 +1,18 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.17-git10
-# Mon Jun 26 13:45:44 2006
+# Linux kernel version: 2.6.18-rc1
+# Sun Jul  9 14:16:20 2006
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
 # Code maturity level options
@@ -42,10 +46,12 @@ CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
+CONFIG_RT_MUTEXES=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
 CONFIG_SLAB=y
+CONFIG_VM_EVENT_COUNTERS=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 # CONFIG_SLOB is not set
@@ -86,7 +92,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
@@ -111,9 +116,16 @@ CONFIG_ARCH_AT91RM9200=y
 # CONFIG_ARCH_OMAP is not set
 
 #
-# AT91RM9200 Implementations
+# Atmel AT91 System-on-Chip
 #
 
+#
+# Atmel AT91 Processors
+#
+CONFIG_ARCH_AT91RM9200=y
+# CONFIG_ARCH_AT91SAM9260 is not set
+# CONFIG_ARCH_AT91SAM9261 is not set
+
 #
 # AT91RM9200 Board Type
 #
@@ -123,12 +135,12 @@ CONFIG_MACH_ONEARM=y
 # CONFIG_MACH_CSB337 is not set
 # CONFIG_MACH_CSB637 is not set
 # CONFIG_MACH_CARMEVA is not set
-# CONFIG_MACH_KB9200 is not set
 # CONFIG_MACH_ATEB9200 is not set
+# CONFIG_MACH_KB9200 is not set
 # CONFIG_MACH_KAFA is not set
 
 #
-# AT91RM9200 Feature Selections
+# AT91 Feature Selections
 #
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 
@@ -186,6 +198,7 @@ CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 # CONFIG_SPARSEMEM_STATIC is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_RESOURCES_64BIT is not set
 CONFIG_LEDS=y
 CONFIG_LEDS_TIMER=y
 # CONFIG_LEDS_CPU is not set
@@ -600,6 +613,7 @@ CONFIG_AT91_WATCHDOG=y
 # USB-based Watchdog Cards
 #
 # CONFIG_USBPCWATCHDOG is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
@@ -743,6 +757,7 @@ CONFIG_VIDEO_V4L2=y
 #
 # Graphics support
 #
+# CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB is not set
 
 #
@@ -980,6 +995,7 @@ CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
+# CONFIG_CIFS_DEBUG2 is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
 # CONFIG_AFS_FS is not set
@@ -1006,14 +1022,19 @@ CONFIG_MSDOS_PARTITION=y
 #
 # CONFIG_PRINTK_TIME is not set
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_KERNEL=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_RWSEMS is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
 CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_INFO is not set
@@ -1052,3 +1073,4 @@ CONFIG_DEBUG_LL=y
 CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y

arch/arm/kernel/bios32.c

@@ -370,17 +370,6 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
 			features &= ~(PCI_COMMAND_SERR | PCI_COMMAND_PARITY);
 
 		switch (dev->class >> 8) {
-#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
-		case PCI_CLASS_BRIDGE_ISA:
-		case PCI_CLASS_BRIDGE_EISA:
-			/*
-			 * If this device is an ISA bridge, set isa_bridge
-			 * to point at this device.  We will then go looking
-			 * for things like keyboard, etc.
-			 */
-			isa_bridge = dev;
-			break;
-#endif
 		case PCI_CLASS_BRIDGE_PCI:
 			pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &status);
 			status |= PCI_BRIDGE_CTL_PARITY|PCI_BRIDGE_CTL_MASTER_ABORT;

arch/arm/kernel/irq.c

@@ -167,6 +167,16 @@ void __init init_IRQ(void)
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
+
+static void route_irq(struct irqdesc *desc, unsigned int irq, unsigned int cpu)
+{
+	pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", irq, desc->cpu, cpu);
+
+	spin_lock_irq(&desc->lock);
+	desc->chip->set_affinity(irq, cpumask_of_cpu(cpu));
+	spin_unlock_irq(&desc->lock);
+}
+
 /*
  * The CPU has been marked offline.  Migrate IRQs off this CPU.  If
  * the affinity settings do not allow other CPUs, force them onto any

arch/arm/kernel/setup.c

@@ -17,7 +17,7 @@
 #include <linux/console.h>
 #include <linux/bootmem.h>
 #include <linux/seq_file.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/init.h>
 #include <linux/root_dev.h>
 #include <linux/cpu.h>

arch/arm/mach-sa1100/collie.c

@@ -83,8 +83,8 @@ static struct scoop_pcmcia_config collie_pcmcia_config = {
 
 
 static struct mcp_plat_data collie_mcp_data = {
-	.mccr0          = MCCR0_ADM,
-	.sclk_rate      = 11981000,
+	.mccr0          = MCCR0_ADM | MCCR0_ExtClk,
+	.sclk_rate      = 9216000,
 };
 
 #ifdef CONFIG_SHARP_LOCOMO

arch/arm/mach-sa1100/collie_pm.c

@@ -9,6 +9,9 @@
  * Li-ion batteries are angry beasts, and they like to explode. This driver is not finished,
  * and sometimes charges them when it should not. If it makes angry lithium to come your way...
  * ...well, you have been warned.
+ *
+ * Actually, this should be quite safe, it seems sharp leaves charger enabled by default,
+ * and my collie did not explode (yet).
  */
 
 #include <linux/module.h>
@@ -40,9 +43,8 @@ static void collie_charger_init(void)
 {
 	int err;
 
-	if (sharpsl_param.adadj != -1) {
+	if (sharpsl_param.adadj != -1)
 		ad_revise = sharpsl_param.adadj;
-	}
 
 	/* Register interrupt handler. */
 	if ((err = request_irq(COLLIE_IRQ_GPIO_AC_IN, sharpsl_ac_isr, IRQF_DISABLED,
@@ -72,27 +74,17 @@ static void collie_measure_temp(int on)
 
 static void collie_charge(int on)
 {
-	if (on) {
-		printk("Should start charger\n");
-	} else {
-		printk("Should stop charger\n");
-	}
-#ifdef I_AM_SURE
+	extern struct platform_device colliescoop_device;
 
-	/* Zaurus seems to contain LTC1731 ; it should know when to
+	/* Zaurus seems to contain LTC1731; it should know when to
 	 * stop charging itself, so setting charge on should be
 	 * relatively harmless (as long as it is not done too often).
 	 */
-#define CF_BUF_CTRL_BASE 0xF0800000
-#define        SCOOP_REG(adr) (*(volatile unsigned short*)(CF_BUF_CTRL_BASE+(adr)))
-#define        SCOOP_REG_GPWR    SCOOP_REG(SCOOP_GPWR)
-
 	if (on) {
 		set_scoop_gpio(&colliescoop_device.dev, COLLIE_SCP_CHARGE_ON);
 	} else {
 		reset_scoop_gpio(&colliescoop_device.dev, COLLIE_SCP_CHARGE_ON);
 	}
-#endif
 }
 
 static void collie_discharge(int on)
@@ -127,7 +119,6 @@ int collie_read_backup_battery(void)
 
 	ucb1x00_adc_enable(ucb);
 
-	/* Gives 75..130 */
 	ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_BBAT_ON, 0);
 	voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC);
 
@@ -146,9 +137,8 @@ int collie_read_main_battery(void)
 	ucb1x00_adc_enable(ucb);
 	ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_BBAT_ON);
 	ucb1x00_io_write(ucb, COLLIE_TC35143_GPIO_MBAT_ON, 0);
-	/* gives values 160..255 with battery removed... and
-	   145..255 with battery inserted. (on AC), goes as low as
-	   80 on DC. */
+
+	mdelay(1);
 	voltage = ucb1x00_adc_read(ucb, UCB_ADC_INP_AD1, UCB_SYNC);
 
 	ucb1x00_io_write(ucb, 0, COLLIE_TC35143_GPIO_MBAT_ON);
@@ -192,7 +182,7 @@ static unsigned long read_devdata(int which)
 	case SHARPSL_BATT_TEMP:
 		return collie_read_temp();
 	case SHARPSL_ACIN_VOLT:
-		return 0x1;
+		return 500;
 	case SHARPSL_STATUS_ACIN: {
 		int ret = GPLR & COLLIE_GPIO_AC_IN;
 		printk("AC status = %d\n", ret);
@@ -208,10 +198,33 @@ static unsigned long read_devdata(int which)
 	}
 }
 
+struct battery_thresh collie_battery_levels_acin[] = {
+	{ 420, 100},
+	{ 417,  95},
+	{ 415,  90},
+	{ 413,  80},
+	{ 411,  75},
+	{ 408,  70},
+	{ 406,  60},
+	{ 403,  50},
+	{ 398,  40},
+	{ 391,  25},
+	{  10,   5},
+	{   0,   0},
+};
+
 struct battery_thresh collie_battery_levels[] = {
-	{ 368, 100},
-	{ 358,  25},
-	{ 356,   5},
+	{ 394, 100},
+	{ 390,  95},
+	{ 380,  90},
+	{ 370,  80},
+	{ 368,  75},	/* From sharp code: battery high with frontlight */
+	{ 366,  70},	/* 60..90 -- fake values invented by me for testing */
+	{ 364,  60},
+	{ 362,  50},
+	{ 360,  40},
+	{ 358,  25},	/* From sharp code: battery low with frontlight */
+	{ 356,   5},	/* From sharp code: battery verylow with frontlight */
 	{   0,   0},
 };
 
@@ -226,13 +239,21 @@ struct sharpsl_charger_machinfo collie_pm_machinfo = {
 	.postsuspend      = collie_postsuspend,
 	.charger_wakeup   = collie_charger_wakeup,
 	.should_wakeup    = collie_should_wakeup,
-	.bat_levels       = 3,
+	.bat_levels       = 12,
 	.bat_levels_noac  = collie_battery_levels,
-	.bat_levels_acin  = collie_battery_levels,
+	.bat_levels_acin  = collie_battery_levels_acin,
 	.status_high_acin = 368,
 	.status_low_acin  = 358,
 	.status_high_noac = 368,
 	.status_low_noac  = 358,
+	.charge_on_volt	  = 350,	/* spitz uses 2.90V, but lets play it safe. */
+	.charge_on_temp   = 550,
+	.charge_acin_high = 550,	/* collie does not seem to have sensor for this, anyway */
+	.charge_acin_low  = 450,	/* ignored, too */
+	.fatal_acin_volt  = 356,
+	.fatal_noacin_volt = 356,
+
+	.batfull_irq = 1,		/* We do not want periodical charge restarts */
 };
 
 static int __init collie_pm_ucb_add(struct ucb1x00_dev *pdev)

arch/arm/mach-versatile/core.c

@@ -35,6 +35,7 @@
 #include <asm/hardware/arm_timer.h>
 #include <asm/hardware/icst307.h>
 #include <asm/hardware/vic.h>
+#include <asm/mach-types.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
@@ -352,11 +353,7 @@ static const struct icst307_params versatile_oscvco_params = {
 static void versatile_oscvco_set(struct clk *clk, struct icst307_vco vco)
 {
 	void __iomem *sys_lock = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LOCK_OFFSET;
-#if defined(CONFIG_ARCH_VERSATILE_PB)
-	void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC4_OFFSET;
-#elif defined(CONFIG_MACH_VERSATILE_AB)
-	void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSC1_OFFSET;
-#endif
+	void __iomem *sys_osc = __io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_OSCCLCD_OFFSET;
 	u32 val;
 
 	val = readl(sys_osc) & ~0x7ffff;
@@ -529,7 +526,7 @@ static void versatile_clcd_disable(struct clcd_fb *fb)
 	/*
 	 * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light off
 	 */
-	if (fb->panel == &sanyo_2_5_in) {
+	if (machine_is_versatile_ab() && fb->panel == &sanyo_2_5_in) {
 		void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
 		unsigned long ctrl;
 
@@ -578,7 +575,7 @@ static void versatile_clcd_enable(struct clcd_fb *fb)
 	/*
 	 * If the LCD is Sanyo 2x5 in on the IB2 board, turn the back-light on
 	 */
-	if (fb->panel == &sanyo_2_5_in) {
+	if (machine_is_versatile_ab() && fb->panel == &sanyo_2_5_in) {
 		void __iomem *versatile_ib2_ctrl = __io_address(VERSATILE_IB2_CTRL);
 		unsigned long ctrl;
 

arch/arm/nwfpe/softfloat.h

@@ -61,7 +61,7 @@ typedef struct {
     u16 __padding;
 #endif
     u64 low;
-} floatx80;
+}  __attribute__ ((packed,aligned(4))) floatx80;
 
 /*
 -------------------------------------------------------------------------------

arch/arm26/kernel/setup.c

@@ -17,7 +17,7 @@
 #include <linux/console.h>
 #include <linux/bootmem.h>
 #include <linux/seq_file.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/init.h>
 #include <linux/root_dev.h>
 

arch/cris/arch-v10/drivers/eeprom.c

@@ -450,9 +450,9 @@ int __init eeprom_init(void)
 static int eeprom_open(struct inode * inode, struct file * file)
 {
 
-  if(MINOR(inode->i_rdev) != EEPROM_MINOR_NR)
+  if(iminor(inode) != EEPROM_MINOR_NR)
      return -ENXIO;
-  if(MAJOR(inode->i_rdev) != EEPROM_MAJOR_NR)
+  if(imajor(inode) != EEPROM_MAJOR_NR)
      return -ENXIO;
 
   if( eeprom.size > 0 )

arch/cris/arch-v10/drivers/gpio.c

@@ -435,7 +435,7 @@ static int
 gpio_open(struct inode *inode, struct file *filp)
 {
 	struct gpio_private *priv;
-	int p = MINOR(inode->i_rdev);
+	int p = iminor(inode);
 
 	if (p > GPIO_MINOR_LAST)
 		return -EINVAL;

arch/cris/arch-v32/drivers/cryptocop.c

@@ -2302,7 +2302,7 @@ static int cryptocop_job_setup(struct cryptocop_prio_job **pj, struct cryptocop_
 
 static int cryptocop_open(struct inode *inode, struct file *filp)
 {
-	int p = MINOR(inode->i_rdev);
+	int p = iminor(inode);
 
 	if (p != CRYPTOCOP_MINOR) return -EINVAL;
 

arch/cris/arch-v32/drivers/gpio.c

@@ -418,7 +418,7 @@ static int
 gpio_open(struct inode *inode, struct file *filp)
 {
 	struct gpio_private *priv;
-	int p = MINOR(inode->i_rdev);
+	int p = iminor(inode);
 
 	if (p > GPIO_MINOR_LAST)
 		return -EINVAL;

arch/cris/arch-v32/drivers/pcf8563.c

@@ -324,14 +324,12 @@ pcf8563_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, unsigned
 int
 pcf8563_open(struct inode *inode, struct file *filp)
 {
-	MOD_INC_USE_COUNT;
 	return 0;
 }
 
 int
 pcf8563_release(struct inode *inode, struct file *filp)
 {
-	MOD_DEC_USE_COUNT;
 	return 0;
 }
 

arch/cris/arch-v32/drivers/sync_serial.c

@@ -340,7 +340,7 @@ static inline int sync_data_avail_to_end(struct sync_port *port)
 
 static int sync_serial_open(struct inode *inode, struct file *file)
 {
-	int dev = MINOR(inode->i_rdev);
+	int dev = iminor(inode);
 	sync_port* port;
 	reg_dma_rw_cfg cfg = {.en = regk_dma_yes};
 	reg_dma_rw_intr_mask intr_mask = {.data = regk_dma_yes};
@@ -486,7 +486,7 @@ static int sync_serial_open(struct inode *inode, struct file *file)
 
 static int sync_serial_release(struct inode *inode, struct file *file)
 {
-	int dev = MINOR(inode->i_rdev);
+	int dev = iminor(inode);
 	sync_port* port;
 
 	if (dev < 0 || dev >= NUMBER_OF_PORTS || !ports[dev].enabled)
@@ -504,7 +504,7 @@ static int sync_serial_release(struct inode *inode, struct file *file)
 
 static unsigned int sync_serial_poll(struct file *file, poll_table *wait)
 {
-	int dev = MINOR(file->f_dentry->d_inode->i_rdev);
+	int dev = iminor(file->f_dentry->d_inode);
 	unsigned int mask = 0;
 	sync_port* port;
 	DEBUGPOLL( static unsigned int prev_mask = 0; );
@@ -531,7 +531,7 @@ static int sync_serial_ioctl(struct inode *inode, struct file *file,
 		  unsigned int cmd, unsigned long arg)
 {
 	int return_val = 0;
-	int dev = MINOR(file->f_dentry->d_inode->i_rdev);
+	int dev = iminor(file->f_dentry->d_inode);
 	sync_port* port;
 	reg_sser_rw_tr_cfg tr_cfg;
 	reg_sser_rw_rec_cfg rec_cfg;
@@ -789,7 +789,7 @@ static int sync_serial_ioctl(struct inode *inode, struct file *file,
 static ssize_t sync_serial_write(struct file * file, const char * buf,
                                  size_t count, loff_t *ppos)
 {
-	int dev = MINOR(file->f_dentry->d_inode->i_rdev);
+	int dev = iminor(file->f_dentry->d_inode);
 	DECLARE_WAITQUEUE(wait, current);
 	sync_port *port;
 	unsigned long c, c1;
@@ -919,7 +919,7 @@ static ssize_t sync_serial_write(struct file * file, const char * buf,
 static ssize_t sync_serial_read(struct file * file, char * buf,
 				size_t count, loff_t *ppos)
 {
-	int dev = MINOR(file->f_dentry->d_inode->i_rdev);
+	int dev = iminor(file->f_dentry->d_inode);
 	int avail;
 	sync_port *port;
 	unsigned char* start;

arch/cris/kernel/setup.c

@@ -15,7 +15,7 @@
 #include <linux/bootmem.h>
 #include <asm/pgtable.h>
 #include <linux/seq_file.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/utsname.h>
 #include <linux/pfn.h>
 

arch/frv/kernel/asm-offsets.c

@@ -1 +1,115 @@
-/* Dummy asm-offsets.c file. Required by kbuild and ready to be used - hint! */
+/*
+ * Generate definitions needed by assembly language modules.
+ * This code generates raw asm output which is post-processed
+ * to extract and format the required data.
+ */
+
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/personality.h>
+#include <asm/registers.h>
+#include <asm/ucontext.h>
+#include <asm/processor.h>
+#include <asm/thread_info.h>
+#include <asm/gdb-stub.h>
+
+#define DEFINE(sym, val) \
+        asm volatile("\n->" #sym " %0 " #val : : "i" (val))
+
+#define DEF_PTREG(sym, reg) \
+        asm volatile("\n->" #sym " %0 offsetof(struct pt_regs, " #reg ")" \
+		     : : "i" (offsetof(struct pt_regs, reg)))
+
+#define DEF_IREG(sym, reg) \
+        asm volatile("\n->" #sym " %0 offsetof(struct user_context, " #reg ")" \
+		     : : "i" (offsetof(struct user_context, reg)))
+
+#define DEF_FREG(sym, reg) \
+        asm volatile("\n->" #sym " %0 offsetof(struct user_context, " #reg ")" \
+		     : : "i" (offsetof(struct user_context, reg)))
+
+#define DEF_0REG(sym, reg) \
+        asm volatile("\n->" #sym " %0 offsetof(struct frv_frame0, " #reg ")" \
+		     : : "i" (offsetof(struct frv_frame0, reg)))
+
+#define BLANK() asm volatile("\n->" : : )
+
+#define OFFSET(sym, str, mem) \
+	DEFINE(sym, offsetof(struct str, mem));
+
+void foo(void)
+{
+	/* offsets into the thread_info structure */
+	OFFSET(TI_TASK,			thread_info, task);
+	OFFSET(TI_EXEC_DOMAIN,		thread_info, exec_domain);
+	OFFSET(TI_FLAGS,		thread_info, flags);
+	OFFSET(TI_STATUS,		thread_info, status);
+	OFFSET(TI_CPU,			thread_info, cpu);
+	OFFSET(TI_PREEMPT_COUNT,	thread_info, preempt_count);
+	OFFSET(TI_ADDR_LIMIT,		thread_info, addr_limit);
+	OFFSET(TI_RESTART_BLOCK,	thread_info, restart_block);
+	BLANK();
+
+	/* offsets into register file storage */
+	DEF_PTREG(REG_PSR,		psr);
+	DEF_PTREG(REG_ISR,		isr);
+	DEF_PTREG(REG_CCR,		ccr);
+	DEF_PTREG(REG_CCCR,		cccr);
+	DEF_PTREG(REG_LR,		lr);
+	DEF_PTREG(REG_LCR,		lcr);
+	DEF_PTREG(REG_PC,		pc);
+	DEF_PTREG(REG__STATUS,		__status);
+	DEF_PTREG(REG_SYSCALLNO,	syscallno);
+	DEF_PTREG(REG_ORIG_GR8,		orig_gr8);
+	DEF_PTREG(REG_GNER0,		gner0);
+	DEF_PTREG(REG_GNER1,		gner1);
+	DEF_PTREG(REG_IACC0,		iacc0);
+	DEF_PTREG(REG_TBR,		tbr);
+	DEF_PTREG(REG_GR0,		tbr);
+	DEFINE(REG__END,		sizeof(struct pt_regs));
+	BLANK();
+
+	DEF_0REG(REG_DCR,		debug.dcr);
+	DEF_0REG(REG_IBAR0,		debug.ibar[0]);
+	DEF_0REG(REG_DBAR0,		debug.dbar[0]);
+	DEF_0REG(REG_DBDR00,		debug.dbdr[0][0]);
+	DEF_0REG(REG_DBMR00,		debug.dbmr[0][0]);
+	BLANK();
+
+	DEF_IREG(__INT_GR0,		i.gr[0]);
+	DEF_FREG(__USER_FPMEDIA,	f);
+	DEF_FREG(__FPMEDIA_FR0,		f.fr[0]);
+	DEF_FREG(__FPMEDIA_FNER0,	f.fner[0]);
+	DEF_FREG(__FPMEDIA_MSR0,	f.msr[0]);
+	DEF_FREG(__FPMEDIA_ACC0,	f.acc[0]);
+	DEF_FREG(__FPMEDIA_ACCG0,	f.accg[0]);
+	DEF_FREG(__FPMEDIA_FSR0,	f.fsr[0]);
+	BLANK();
+
+	DEFINE(NR_PT_REGS,		sizeof(struct pt_regs) / 4);
+	DEFINE(NR_USER_INT_REGS,	sizeof(struct user_int_regs) / 4);
+	DEFINE(NR_USER_FPMEDIA_REGS,	sizeof(struct user_fpmedia_regs) / 4);
+	DEFINE(NR_USER_CONTEXT,		sizeof(struct user_context) / 4);
+	DEFINE(FRV_FRAME0_SIZE,		sizeof(struct frv_frame0));
+	BLANK();
+
+	/* offsets into thread_struct */
+	OFFSET(__THREAD_FRAME,		thread_struct, frame);
+	OFFSET(__THREAD_CURR,		thread_struct, curr);
+	OFFSET(__THREAD_SP,		thread_struct, sp);
+	OFFSET(__THREAD_FP,		thread_struct, fp);
+	OFFSET(__THREAD_LR,		thread_struct, lr);
+	OFFSET(__THREAD_PC,		thread_struct, pc);
+	OFFSET(__THREAD_GR16,		thread_struct, gr[0]);
+	OFFSET(__THREAD_SCHED_LR,	thread_struct, sched_lr);
+	OFFSET(__THREAD_FRAME0,		thread_struct, frame0);
+	OFFSET(__THREAD_USER,		thread_struct, user);
+	BLANK();
+
+	/* offsets into frv_debug_status */
+	OFFSET(DEBUG_BPSR,		frv_debug_status, bpsr);
+	OFFSET(DEBUG_DCR,		frv_debug_status, dcr);
+	OFFSET(DEBUG_BRR,		frv_debug_status, brr);
+	OFFSET(DEBUG_NMAR,		frv_debug_status, nmar);
+	BLANK();
+}

arch/frv/kernel/break.S

@@ -9,11 +9,11 @@
  * 2 of the License, or (at your option) any later version.
  */
 
-#include <linux/sys.h>
 #include <linux/linkage.h>
 #include <asm/setup.h>
 #include <asm/segment.h>
 #include <asm/ptrace.h>
+#include <asm/thread_info.h>
 #include <asm/spr-regs.h>
 
 #include <asm/errno.h>
@@ -23,13 +23,11 @@
 #
 	.section	.bss.stack
 	.globl		__break_user_context
-	.balign		8192
+	.balign		THREAD_SIZE
 __break_stack:
-	.space		(8192 - (USER_CONTEXT_SIZE + REG__DEBUG_XTRA)) & ~7
-__break_stack_tos:
-	.space		REG__DEBUG_XTRA
-__break_user_context:
-	.space		USER_CONTEXT_SIZE
+	.space		THREAD_SIZE - FRV_FRAME0_SIZE
+__break_frame_0:
+	.space		FRV_FRAME0_SIZE
 
 #
 # miscellaneous variables
@@ -74,8 +72,8 @@ __entry_break:
 #endif
 	LEDS		0x1001,gr31
 
-	sethi.p		%hi(__break_user_context),gr31
-	setlo		%lo(__break_user_context),gr31
+	sethi.p		%hi(__break_frame_0),gr31
+	setlo		%lo(__break_frame_0),gr31
 
 	stdi		gr2,@(gr31,#REG_GR(2))
 	movsg		ccr,gr3
@@ -585,8 +583,8 @@ __break_continue:
 	# set up the kernel stack pointer
 	sti		sp,@(gr31,#REG_SP)
 
-	sethi.p		%hi(__break_stack_tos),sp
-	setlo		%lo(__break_stack_tos),sp
+	sethi.p		%hi(__break_frame_0),sp
+	setlo		%lo(__break_frame_0),sp
 
 	# finish building the exception frame
 	stdi		gr4 ,@(gr31,#REG_GR(4))
@@ -651,9 +649,12 @@ __break_continue:
 	movsg		nmar,gr5
 	movsg		dcr,gr6
 
-	stdi		gr4 ,@(gr31,#REG_BRR)
-	sti		gr19,@(gr31,#REG_BPSR)
-	sti.p		gr6 ,@(gr31,#REG_DCR)
+	sethi.p		%hi(__debug_status),gr7
+	setlo		%lo(__debug_status),gr7
+
+	stdi		gr4 ,@(gr7,#DEBUG_BRR)
+	sti		gr19,@(gr7,#DEBUG_BPSR)
+	sti.p		gr6 ,@(gr7,#DEBUG_DCR)
 
 	# trap exceptions during break handling and disable h/w breakpoints/watchpoints
 	sethi		%hi(DCR_EBE),gr5
@@ -698,7 +699,10 @@ __break_continue:
 	lddi		@(gr31,#REG_PSR) ,gr22
 	ldi		@(gr31,#REG_PC)  ,gr21
 	ldi		@(gr31,#REG_TBR) ,gr20
-	ldi.p		@(gr31,#REG_DCR) ,gr6
+
+	sethi.p		%hi(__debug_status),gr6
+	setlo		%lo(__debug_status),gr6
+	ldi.p		@(gr6,#DEBUG_DCR) ,gr6
 
 	andi		gr22,#PSR_S,gr19		/* rebuild BPSR */
 	andi.p		gr22,#PSR_ET,gr5

arch/frv/kernel/debug-stub.c

@@ -39,10 +39,9 @@ do {						\
 	gdbstub_do_rx();			\
 } while(!FLOWCTL_QUERY(LINE))
 
-static void __init debug_stub_init(void);
+struct frv_debug_status __debug_status;
 
-extern asmlinkage void __break_hijack_kernel_event(void);
-extern asmlinkage void __break_hijack_kernel_event_breaks_here(void);
+static void __init debug_stub_init(void);
 
 /*****************************************************************************/
 /*
@@ -67,7 +66,7 @@ asmlinkage void debug_stub(void)
 		__set_HSR(0, hsr0 & ~HSR0_ETMD);
 
 	/* disable single stepping */
-	__debug_regs->dcr &= ~DCR_SE;
+	__debug_status.dcr &= ~DCR_SE;
 
 	/* kernel mode can propose an exception be handled in debug mode by jumping to a special
 	 * location */
@@ -76,8 +75,8 @@ asmlinkage void debug_stub(void)
 		 * the top kernel context */
 		*__debug_frame = *__frame;
 		__frame = __debug_frame->next_frame;
-		__debug_regs->brr = (__debug_frame->tbr & TBR_TT) << 12;
-		__debug_regs->brr |= BRR_EB;
+		__debug_status.brr = (__debug_frame->tbr & TBR_TT) << 12;
+		__debug_status.brr |= BRR_EB;
 	}
 
 	if (__debug_frame->pc == (unsigned long) __debug_bug_trap + 4) {
@@ -124,7 +123,7 @@ static void __init debug_stub_init(void)
 		__debug_frame->pc = (unsigned long) start_kernel;
 
 	/* enable the debug events we want to trap */
-	__debug_regs->dcr = DCR_EBE;
+	__debug_status.dcr = DCR_EBE;
 
 #ifdef CONFIG_GDBSTUB
 	gdbstub_init();

arch/frv/kernel/entry.S

@@ -27,7 +27,6 @@
  *
  */
 
-#include <linux/sys.h>
 #include <linux/linkage.h>
 #include <asm/thread_info.h>
 #include <asm/setup.h>

arch/frv/kernel/gdb-stub.c

@@ -124,6 +124,7 @@
 #include <linux/slab.h>
 #include <linux/nmi.h>
 
+#include <asm/asm-offsets.h>
 #include <asm/pgtable.h>
 #include <asm/system.h>
 #include <asm/gdb-stub.h>
@@ -136,7 +137,6 @@ extern void debug_to_serial(const char *p, int n);
 extern void gdbstub_console_write(struct console *co, const char *p, unsigned n);
 
 extern volatile uint32_t __break_error_detect[3]; /* ESFR1, ESR15, EAR15 */
-extern struct user_context __break_user_context;
 
 struct __debug_amr {
 	unsigned long L, P;
@@ -926,6 +926,7 @@ static int gdbstub_set_breakpoint(unsigned long type, unsigned long addr, unsign
 		if (!(__debug_regs->dcr & DCR_IBE0)) {
 			//gdbstub_printk("set h/w break 0: %08lx\n", addr);
 			__debug_regs->dcr |= DCR_IBE0;
+			__debug_regs->ibar[0] = addr;
 			asm volatile("movgs %0,ibar0" : : "r"(addr));
 			return 0;
 		}
@@ -933,6 +934,7 @@ static int gdbstub_set_breakpoint(unsigned long type, unsigned long addr, unsign
 		if (!(__debug_regs->dcr & DCR_IBE1)) {
 			//gdbstub_printk("set h/w break 1: %08lx\n", addr);
 			__debug_regs->dcr |= DCR_IBE1;
+			__debug_regs->ibar[1] = addr;
 			asm volatile("movgs %0,ibar1" : : "r"(addr));
 			return 0;
 		}
@@ -940,6 +942,7 @@ static int gdbstub_set_breakpoint(unsigned long type, unsigned long addr, unsign
 		if (!(__debug_regs->dcr & DCR_IBE2)) {
 			//gdbstub_printk("set h/w break 2: %08lx\n", addr);
 			__debug_regs->dcr |= DCR_IBE2;
+			__debug_regs->ibar[2] = addr;
 			asm volatile("movgs %0,ibar2" : : "r"(addr));
 			return 0;
 		}
@@ -947,6 +950,7 @@ static int gdbstub_set_breakpoint(unsigned long type, unsigned long addr, unsign
 		if (!(__debug_regs->dcr & DCR_IBE3)) {
 			//gdbstub_printk("set h/w break 3: %08lx\n", addr);
 			__debug_regs->dcr |= DCR_IBE3;
+			__debug_regs->ibar[3] = addr;
 			asm volatile("movgs %0,ibar3" : : "r"(addr));
 			return 0;
 		}
@@ -971,7 +975,14 @@ static int gdbstub_set_breakpoint(unsigned long type, unsigned long addr, unsign
 		if (!(__debug_regs->dcr & (DCR_DRBE0|DCR_DWBE0))) {
 			//gdbstub_printk("set h/w watchpoint 0 type %ld: %08lx\n", type, addr);
 			tmp = type==2 ? DCR_DWBE0 : type==3 ? DCR_DRBE0 : DCR_DRBE0|DCR_DWBE0;
+
 			__debug_regs->dcr |= tmp;
+			__debug_regs->dbar[0] = addr;
+			__debug_regs->dbmr[0][0] = dbmr.mask0;
+			__debug_regs->dbmr[0][1] = dbmr.mask1;
+			__debug_regs->dbdr[0][0] = 0;
+			__debug_regs->dbdr[0][1] = 0;
+
 			asm volatile("	movgs	%0,dbar0	\n"
 				     "	movgs	%1,dbmr00	\n"
 				     "	movgs	%2,dbmr01	\n"
@@ -984,7 +995,14 @@ static int gdbstub_set_breakpoint(unsigned long type, unsigned long addr, unsign
 		if (!(__debug_regs->dcr & (DCR_DRBE1|DCR_DWBE1))) {
 			//gdbstub_printk("set h/w watchpoint 1 type %ld: %08lx\n", type, addr);
 			tmp = type==2 ? DCR_DWBE1 : type==3 ? DCR_DRBE1 : DCR_DRBE1|DCR_DWBE1;
+
 			__debug_regs->dcr |= tmp;
+			__debug_regs->dbar[1] = addr;
+			__debug_regs->dbmr[1][0] = dbmr.mask0;
+			__debug_regs->dbmr[1][1] = dbmr.mask1;
+			__debug_regs->dbdr[1][0] = 0;
+			__debug_regs->dbdr[1][1] = 0;
+
 			asm volatile("	movgs	%0,dbar1	\n"
 				     "	movgs	%1,dbmr10	\n"
 				     "	movgs	%2,dbmr11	\n"
@@ -1047,6 +1065,7 @@ int gdbstub_clear_breakpoint(unsigned long type, unsigned long addr, unsigned lo
 		if (__debug_regs->dcr & DCR_IBE0 && __get_ibar(0) == addr) {
 			//gdbstub_printk("clear h/w break 0: %08lx\n", addr);
 			__debug_regs->dcr &= ~DCR_IBE0;
+			__debug_regs->ibar[0] = 0;
 			asm volatile("movgs gr0,ibar0");
 			return 0;
 		}
@@ -1054,6 +1073,7 @@ int gdbstub_clear_breakpoint(unsigned long type, unsigned long addr, unsigned lo
 		if (__debug_regs->dcr & DCR_IBE1 && __get_ibar(1) == addr) {
 			//gdbstub_printk("clear h/w break 1: %08lx\n", addr);
 			__debug_regs->dcr &= ~DCR_IBE1;
+			__debug_regs->ibar[1] = 0;
 			asm volatile("movgs gr0,ibar1");
 			return 0;
 		}
@@ -1061,6 +1081,7 @@ int gdbstub_clear_breakpoint(unsigned long type, unsigned long addr, unsigned lo
 		if (__debug_regs->dcr & DCR_IBE2 && __get_ibar(2) == addr) {
 			//gdbstub_printk("clear h/w break 2: %08lx\n", addr);
 			__debug_regs->dcr &= ~DCR_IBE2;
+			__debug_regs->ibar[2] = 0;
 			asm volatile("movgs gr0,ibar2");
 			return 0;
 		}
@@ -1068,6 +1089,7 @@ int gdbstub_clear_breakpoint(unsigned long type, unsigned long addr, unsigned lo
 		if (__debug_regs->dcr & DCR_IBE3 && __get_ibar(3) == addr) {
 			//gdbstub_printk("clear h/w break 3: %08lx\n", addr);
 			__debug_regs->dcr &= ~DCR_IBE3;
+			__debug_regs->ibar[3] = 0;
 			asm volatile("movgs gr0,ibar3");
 			return 0;
 		}
@@ -1104,6 +1126,12 @@ int gdbstub_clear_breakpoint(unsigned long type, unsigned long addr, unsigned lo
 
 		//gdbstub_printk("clear h/w watchpoint 0 type %ld: %08lx\n", type, addr);
 		__debug_regs->dcr &= ~(DCR_DRBE0|DCR_DWBE0);
+		__debug_regs->dbar[0] = 0;
+		__debug_regs->dbmr[0][0] = 0;
+		__debug_regs->dbmr[0][1] = 0;
+		__debug_regs->dbdr[0][0] = 0;
+		__debug_regs->dbdr[0][1] = 0;
+
 		asm volatile("	movgs	gr0,dbar0	\n"
 			     "	movgs	gr0,dbmr00	\n"
 			     "	movgs	gr0,dbmr01	\n"
@@ -1123,6 +1151,12 @@ int gdbstub_clear_breakpoint(unsigned long type, unsigned long addr, unsigned lo
 
 		//gdbstub_printk("clear h/w watchpoint 1 type %ld: %08lx\n", type, addr);
 		__debug_regs->dcr &= ~(DCR_DRBE1|DCR_DWBE1);
+		__debug_regs->dbar[1] = 0;
+		__debug_regs->dbmr[1][0] = 0;
+		__debug_regs->dbmr[1][1] = 0;
+		__debug_regs->dbdr[1][0] = 0;
+		__debug_regs->dbdr[1][1] = 0;
+
 		asm volatile("	movgs	gr0,dbar1	\n"
 			     "	movgs	gr0,dbmr10	\n"
 			     "	movgs	gr0,dbmr11	\n"
@@ -1163,7 +1197,7 @@ static void gdbstub_check_breakpoint(void)
  */
 static void __attribute__((unused)) gdbstub_show_regs(void)
 {
-	uint32_t *reg;
+	unsigned long *reg;
 	int loop;
 
 	gdbstub_printk("\n");
@@ -1172,11 +1206,11 @@ static void __attribute__((unused)) gdbstub_show_regs(void)
 		       __debug_frame,
 		       __debug_frame->psr & PSR_S ? "kernel" : "user");
 
-	reg = (uint32_t *) __debug_frame;
-	for (loop = 0; loop < REG__END; loop++) {
-		printk("%s %08x", regnames[loop + 0], reg[loop + 0]);
+	reg = (unsigned long *) __debug_frame;
+	for (loop = 0; loop < NR_PT_REGS; loop++) {
+		printk("%s %08lx", regnames[loop + 0], reg[loop + 0]);
 
-		if (loop == REG__END - 1 || loop % 5 == 4)
+		if (loop == NR_PT_REGS - 1 || loop % 5 == 4)
 			printk("\n");
 		else
 			printk(" | ");
@@ -1191,13 +1225,8 @@ static void __attribute__((unused)) gdbstub_show_regs(void)
  */
 static void __attribute__((unused)) gdbstub_dump_debugregs(void)
 {
-	unsigned long x;
-
-	x = __debug_regs->dcr;
-	gdbstub_printk("DCR    %08lx  ", x);
-
-	x = __debug_regs->brr;
-	gdbstub_printk("BRR %08lx\n", x);
+	gdbstub_printk("DCR    %08lx  ", __debug_status.dcr);
+	gdbstub_printk("BRR    %08lx\n", __debug_status.brr);
 
 	gdbstub_printk("IBAR0  %08lx  ", __get_ibar(0));
 	gdbstub_printk("IBAR1  %08lx  ", __get_ibar(1));
@@ -1360,7 +1389,7 @@ void gdbstub(int sigval)
 #endif
 	}
 
-	save_user_regs(&__break_user_context);
+	save_user_regs(&__debug_frame0->uc);
 
 #if 0
 	gdbstub_printk("--> gdbstub() %08x %p %08x %08x\n",
@@ -1389,8 +1418,8 @@ void gdbstub(int sigval)
 		__debug_frame->psr &= ~PSR_S;
 		if (__debug_frame->psr & PSR_PS)
 			__debug_frame->psr |= PSR_S;
-		__debug_regs->brr = (__debug_frame->tbr & TBR_TT) << 12;
-		__debug_regs->brr |= BRR_EB;
+		__debug_status.brr = (__debug_frame->tbr & TBR_TT) << 12;
+		__debug_status.brr |= BRR_EB;
 		sigval = SIGINT;
 	}
 
@@ -1404,15 +1433,15 @@ void gdbstub(int sigval)
 		__debug_frame->psr &= ~PSR_S;
 		if (__debug_frame->psr & PSR_PS)
 			__debug_frame->psr |= PSR_S;
-		__debug_regs->brr = (__debug_frame->tbr & TBR_TT) << 12;
-		__debug_regs->brr |= BRR_EB;
+		__debug_status.brr = (__debug_frame->tbr & TBR_TT) << 12;
+		__debug_status.brr |= BRR_EB;
 		sigval = SIGXCPU;
 	}
 
 	LEDS(0x5002);
 
 	/* after a BREAK insn, the PC lands on the far side of it */
-	if (__debug_regs->brr & BRR_SB)
+	if (__debug_status.brr & BRR_SB)
 		gdbstub_check_breakpoint();
 
 	LEDS(0x5003);
@@ -1431,7 +1460,7 @@ void gdbstub(int sigval)
 	}
 
 	if (!sigval)
-		sigval = gdbstub_compute_signal(__debug_regs->brr);
+		sigval = gdbstub_compute_signal(__debug_status.brr);
 
 	LEDS(0x5004);
 
@@ -1441,7 +1470,7 @@ void gdbstub(int sigval)
 	if (sigval != SIGINT && sigval != SIGTRAP && sigval != SIGILL) {
 		static const char title[] = "Break ";
 		static const char crlf[] = "\r\n";
-		unsigned long brr = __debug_regs->brr;
+		unsigned long brr = __debug_status.brr;
 		char hx;
 
 		ptr = output_buffer;
@@ -1565,28 +1594,24 @@ void gdbstub(int sigval)
 			ptr = mem2hex(&zero, ptr, 4, 0);
 
 			for (loop = 1; loop <= 27; loop++)
-				ptr = mem2hex((unsigned long *)__debug_frame + REG_GR(loop),
-					      ptr, 4, 0);
+				ptr = mem2hex(&__debug_user_context->i.gr[loop], ptr, 4, 0);
 			temp = (unsigned long) __frame;
 			ptr = mem2hex(&temp, ptr, 4, 0);
-			ptr = mem2hex((unsigned long *)__debug_frame + REG_GR(29), ptr, 4, 0);
-			ptr = mem2hex((unsigned long *)__debug_frame + REG_GR(30), ptr, 4, 0);
+			ptr = mem2hex(&__debug_user_context->i.gr[29], ptr, 4, 0);
+			ptr = mem2hex(&__debug_user_context->i.gr[30], ptr, 4, 0);
 #ifdef CONFIG_MMU
-			ptr = mem2hex((unsigned long *)__debug_frame + REG_GR(31), ptr, 4, 0);
+			ptr = mem2hex(&__debug_user_context->i.gr[31], ptr, 4, 0);
 #else
 			temp = (unsigned long) __debug_frame;
 			ptr = mem2hex(&temp, ptr, 4, 0);
 #endif
 
 			for (loop = 32; loop <= 63; loop++)
-				ptr = mem2hex((unsigned long *)__debug_frame + REG_GR(loop),
-					      ptr, 4, 0);
+				ptr = mem2hex(&__debug_user_context->i.gr[loop], ptr, 4, 0);
 
 			/* deal with FR0-FR63 */
 			for (loop = 0; loop <= 63; loop++)
-				ptr = mem2hex((unsigned long *)&__break_user_context +
-					      __FPMEDIA_FR(loop),
-					      ptr, 4, 0);
+				ptr = mem2hex(&__debug_user_context->f.fr[loop], ptr, 4, 0);
 
 			/* deal with special registers */
 			ptr = mem2hex(&__debug_frame->pc,    ptr, 4, 0);
@@ -1597,7 +1622,7 @@ void gdbstub(int sigval)
 			ptr = mem2hex(&zero, ptr, 4, 0);
 			ptr = mem2hex(&zero, ptr, 4, 0);
 			ptr = mem2hex(&__debug_frame->tbr,   ptr, 4, 0);
-			ptr = mem2hex(&__debug_regs->brr ,   ptr, 4, 0);
+			ptr = mem2hex(&__debug_status.brr ,   ptr, 4, 0);
 
 			asm volatile("movsg dbar0,%0" : "=r"(dbar));
 			ptr = mem2hex(&dbar, ptr, 4, 0);
@@ -1622,21 +1647,21 @@ void gdbstub(int sigval)
 
 			ptr = mem2hex(&__debug_frame->iacc0, ptr, 8, 0);
 
-			ptr = mem2hex(&__break_user_context.f.fsr[0], ptr, 4, 0);
+			ptr = mem2hex(&__debug_user_context->f.fsr[0], ptr, 4, 0);
 
 			for (loop = 0; loop <= 7; loop++)
-				ptr = mem2hex(&__break_user_context.f.acc[loop], ptr, 4, 0);
+				ptr = mem2hex(&__debug_user_context->f.acc[loop], ptr, 4, 0);
 
-			ptr = mem2hex(&__break_user_context.f.accg, ptr, 8, 0);
+			ptr = mem2hex(&__debug_user_context->f.accg, ptr, 8, 0);
 
 			for (loop = 0; loop <= 1; loop++)
-				ptr = mem2hex(&__break_user_context.f.msr[loop], ptr, 4, 0);
+				ptr = mem2hex(&__debug_user_context->f.msr[loop], ptr, 4, 0);
 
 			ptr = mem2hex(&__debug_frame->gner0, ptr, 4, 0);
 			ptr = mem2hex(&__debug_frame->gner1, ptr, 4, 0);
 
-			ptr = mem2hex(&__break_user_context.f.fner[0], ptr, 4, 0);
-			ptr = mem2hex(&__break_user_context.f.fner[1], ptr, 4, 0);
+			ptr = mem2hex(&__debug_user_context->f.fner[0], ptr, 4, 0);
+			ptr = mem2hex(&__debug_user_context->f.fner[1], ptr, 4, 0);
 
 			break;
 
@@ -1648,8 +1673,7 @@ void gdbstub(int sigval)
 			ptr = hex2mem(ptr, &temp, 4);
 
 			for (loop = 1; loop <= 27; loop++)
-				ptr = hex2mem(ptr, (unsigned long *)__debug_frame + REG_GR(loop),
-					      4);
+				ptr = hex2mem(ptr, &__debug_user_context->i.gr[loop], 4);
 
 			ptr = hex2mem(ptr, &temp, 4);
 			__frame = (struct pt_regs *) temp;
@@ -1662,14 +1686,11 @@ void gdbstub(int sigval)
 #endif
 
 			for (loop = 32; loop <= 63; loop++)
-				ptr = hex2mem(ptr, (unsigned long *)__debug_frame + REG_GR(loop),
-					      4);
+				ptr = hex2mem(ptr, &__debug_user_context->i.gr[loop], 4);
 
 			/* deal with FR0-FR63 */
 			for (loop = 0; loop <= 63; loop++)
-				ptr = mem2hex((unsigned long *)&__break_user_context +
-					      __FPMEDIA_FR(loop),
-					      ptr, 4, 0);
+				ptr = mem2hex(&__debug_user_context->f.fr[loop], ptr, 4, 0);
 
 			/* deal with special registers */
 			ptr = hex2mem(ptr, &__debug_frame->pc,  4);
@@ -1694,21 +1715,21 @@ void gdbstub(int sigval)
 
 			ptr = hex2mem(ptr, &__debug_frame->iacc0, 8);
 
-			ptr = hex2mem(ptr, &__break_user_context.f.fsr[0], 4);
+			ptr = hex2mem(ptr, &__debug_user_context->f.fsr[0], 4);
 
 			for (loop = 0; loop <= 7; loop++)
-				ptr = hex2mem(ptr, &__break_user_context.f.acc[loop], 4);
+				ptr = hex2mem(ptr, &__debug_user_context->f.acc[loop], 4);
 
-			ptr = hex2mem(ptr, &__break_user_context.f.accg, 8);
+			ptr = hex2mem(ptr, &__debug_user_context->f.accg, 8);
 
 			for (loop = 0; loop <= 1; loop++)
-				ptr = hex2mem(ptr, &__break_user_context.f.msr[loop], 4);
+				ptr = hex2mem(ptr, &__debug_user_context->f.msr[loop], 4);
 
 			ptr = hex2mem(ptr, &__debug_frame->gner0, 4);
 			ptr = hex2mem(ptr, &__debug_frame->gner1, 4);
 
-			ptr = hex2mem(ptr, &__break_user_context.f.fner[0], 4);
-			ptr = hex2mem(ptr, &__break_user_context.f.fner[1], 4);
+			ptr = hex2mem(ptr, &__debug_user_context->f.fner[0], 4);
+			ptr = hex2mem(ptr, &__debug_user_context->f.fner[1], 4);
 
 			gdbstub_strcpy(output_buffer,"OK");
 			break;
@@ -1769,52 +1790,52 @@ void gdbstub(int sigval)
 			case GDB_REG_GR(0):
 				break;
 			case GDB_REG_GR(1) ... GDB_REG_GR(63):
-				__break_user_context.i.gr[addr - GDB_REG_GR(0)] = temp;
+				__debug_user_context->i.gr[addr - GDB_REG_GR(0)] = temp;
 				break;
 			case GDB_REG_FR(0) ... GDB_REG_FR(63):
-				__break_user_context.f.fr[addr - GDB_REG_FR(0)] = temp;
+				__debug_user_context->f.fr[addr - GDB_REG_FR(0)] = temp;
 				break;
 			case GDB_REG_PC:
-				__break_user_context.i.pc = temp;
+				__debug_user_context->i.pc = temp;
 				break;
 			case GDB_REG_PSR:
-				__break_user_context.i.psr = temp;
+				__debug_user_context->i.psr = temp;
 				break;
 			case GDB_REG_CCR:
-				__break_user_context.i.ccr = temp;
+				__debug_user_context->i.ccr = temp;
 				break;
 			case GDB_REG_CCCR:
-				__break_user_context.i.cccr = temp;
+				__debug_user_context->i.cccr = temp;
 				break;
 			case GDB_REG_BRR:
-				__debug_regs->brr = temp;
+				__debug_status.brr = temp;
 				break;
 			case GDB_REG_LR:
-				__break_user_context.i.lr = temp;
+				__debug_user_context->i.lr = temp;
 				break;
 			case GDB_REG_LCR:
-				__break_user_context.i.lcr = temp;
+				__debug_user_context->i.lcr = temp;
 				break;
 			case GDB_REG_FSR0:
-				__break_user_context.f.fsr[0] = temp;
+				__debug_user_context->f.fsr[0] = temp;
 				break;
 			case GDB_REG_ACC(0) ... GDB_REG_ACC(7):
-				__break_user_context.f.acc[addr - GDB_REG_ACC(0)] = temp;
+				__debug_user_context->f.acc[addr - GDB_REG_ACC(0)] = temp;
 				break;
 			case GDB_REG_ACCG(0):
-				*(uint32_t *) &__break_user_context.f.accg[0] = temp;
+				*(uint32_t *) &__debug_user_context->f.accg[0] = temp;
 				break;
 			case GDB_REG_ACCG(4):
-				*(uint32_t *) &__break_user_context.f.accg[4] = temp;
+				*(uint32_t *) &__debug_user_context->f.accg[4] = temp;
 				break;
 			case GDB_REG_MSR(0) ... GDB_REG_MSR(1):
-				__break_user_context.f.msr[addr - GDB_REG_MSR(0)] = temp;
+				__debug_user_context->f.msr[addr - GDB_REG_MSR(0)] = temp;
 				break;
 			case GDB_REG_GNER(0) ... GDB_REG_GNER(1):
-				__break_user_context.i.gner[addr - GDB_REG_GNER(0)] = temp;
+				__debug_user_context->i.gner[addr - GDB_REG_GNER(0)] = temp;
 				break;
 			case GDB_REG_FNER(0) ... GDB_REG_FNER(1):
-				__break_user_context.f.fner[addr - GDB_REG_FNER(0)] = temp;
+				__debug_user_context->f.fner[addr - GDB_REG_FNER(0)] = temp;
 				break;
 			default:
 				temp2 = 0;
@@ -1850,6 +1871,7 @@ void gdbstub(int sigval)
 			/* step to next instruction */
 		case 's':
 			__debug_regs->dcr |= DCR_SE;
+			__debug_status.dcr |= DCR_SE;
 			goto done;
 
 			/* set baud rate (bBB) */
@@ -1934,7 +1956,7 @@ void gdbstub(int sigval)
 	}
 
  done:
-	restore_user_regs(&__break_user_context);
+	restore_user_regs(&__debug_frame0->uc);
 
 	//gdbstub_dump_debugregs();
 	//gdbstub_printk("<-- gdbstub() %08x\n", __debug_frame->pc);
@@ -1966,7 +1988,6 @@ void __init gdbstub_init(void)
 #endif
 
 	gdbstub_printk("%s", gdbstub_banner);
-	gdbstub_printk("DCR: %x\n", __debug_regs->dcr);
 
 	gdbstub_io_init();
 

arch/frv/kernel/head.S

@@ -11,6 +11,7 @@
 
 #include <linux/threads.h>
 #include <linux/linkage.h>
+#include <asm/thread_info.h>
 #include <asm/ptrace.h>
 #include <asm/page.h>
 #include <asm/spr-regs.h>

arch/frv/kernel/local.h

@@ -51,6 +51,9 @@ extern void (*__power_switch_wake_cleanup)(void);
 /* time.c */
 extern void time_divisor_init(void);
 
+/* cmode.S */
+extern asmlinkage void frv_change_cmode(int);
+
 
 #endif /* __ASSEMBLY__ */
 #endif /* _FRV_LOCAL_H */

arch/frv/kernel/pm.c

@@ -26,11 +26,6 @@
 
 #include "local.h"
 
-void (*pm_power_off)(void);
-EXPORT_SYMBOL(pm_power_off);
-
-extern void frv_change_cmode(int);
-
 /*
  * Debug macros
  */

arch/frv/kernel/process.c

@@ -10,6 +10,7 @@
  * 2 of the License, or (at your option) any later version.
  */
 
+#include <linux/module.h>
 #include <linux/errno.h>
 #include <linux/sched.h>
 #include <linux/kernel.h>
@@ -25,6 +26,7 @@
 #include <linux/reboot.h>
 #include <linux/interrupt.h>
 
+#include <asm/asm-offsets.h>
 #include <asm/uaccess.h>
 #include <asm/system.h>
 #include <asm/setup.h>
@@ -38,6 +40,9 @@ asmlinkage void ret_from_fork(void);
 
 #include <asm/pgalloc.h>
 
+void (*pm_power_off)(void);
+EXPORT_SYMBOL(pm_power_off);
+
 struct task_struct *alloc_task_struct(void)
 {
 	struct task_struct *p = kmalloc(THREAD_SIZE, GFP_KERNEL);
@@ -203,7 +208,7 @@ int copy_thread(int nr, unsigned long clone_flags,
 
 	regs0 = __kernel_frame0_ptr;
 	childregs0 = (struct pt_regs *)
-		(task_stack_page(p) + THREAD_SIZE - USER_CONTEXT_SIZE);
+		(task_stack_page(p) + THREAD_SIZE - FRV_FRAME0_SIZE);
 	childregs = childregs0;
 
 	/* set up the userspace frame (the only place that the USP is stored) */
@@ -367,3 +372,11 @@ int elf_check_arch(const struct elf32_hdr *hdr)
 
 	return 1;
 }
+
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpregs)
+{
+	memcpy(fpregs,
+	       &current->thread.user->f,
+	       sizeof(current->thread.user->f));
+	return 1;
+}

arch/frv/kernel/switch_to.S

@@ -11,6 +11,7 @@
 # 2 of the License, or (at your option) any later version.
 #
 ###############################################################################
+
 #include <linux/linkage.h>
 #include <asm/thread_info.h>
 #include <asm/processor.h>
@@ -30,7 +31,7 @@
 	# address of frame 0 (userspace) on current kernel stack
 	.globl		__kernel_frame0_ptr
 __kernel_frame0_ptr:
-	.long		init_thread_union + THREAD_SIZE - USER_CONTEXT_SIZE
+	.long		init_thread_union + THREAD_SIZE - FRV_FRAME0_SIZE
 
 	# address of current task
 	.globl		__kernel_current_task

arch/frv/kernel/traps.c

@@ -20,6 +20,7 @@
 #include <linux/init.h>
 #include <linux/module.h>
 
+#include <asm/asm-offsets.h>
 #include <asm/setup.h>
 #include <asm/fpu.h>
 #include <asm/system.h>
@@ -279,20 +280,20 @@ static const char *regnames[] = {
 
 void show_regs(struct pt_regs *regs)
 {
-	uint32_t *reg;
+	unsigned long *reg;
 	int loop;
 
 	printk("\n");
 
-	printk("Frame: @%08x [%s]\n",
-	       (uint32_t) regs,
+	printk("Frame: @%08lx [%s]\n",
+	       (unsigned long) regs,
 	       regs->psr & PSR_S ? "kernel" : "user");
 
-	reg = (uint32_t *) regs;
-	for (loop = 0; loop < REG__END; loop++) {
-		printk("%s %08x", regnames[loop + 0], reg[loop + 0]);
+	reg = (unsigned long *) regs;
+	for (loop = 0; loop < NR_PT_REGS; loop++) {
+		printk("%s %08lx", regnames[loop + 0], reg[loop + 0]);
 
-		if (loop == REG__END - 1 || loop % 5 == 4)
+		if (loop == NR_PT_REGS - 1 || loop % 5 == 4)
 			printk("\n");
 		else
 			printk(" | ");
@@ -328,7 +329,7 @@ void die_if_kernel(const char *str, ...)
  */
 static void show_backtrace_regs(struct pt_regs *frame)
 {
-	uint32_t *reg;
+	unsigned long *reg;
 	int loop;
 
 	/* print the registers for this frame */
@@ -336,11 +337,11 @@ static void show_backtrace_regs(struct pt_regs *frame)
 	       frame->psr & PSR_S ? "Kernel Mode" : "User Mode",
 	       frame);
 
-	reg = (uint32_t *) frame;
-	for (loop = 0; loop < REG__END; loop++) {
-		printk("%s %08x", regnames[loop + 0], reg[loop + 0]);
+	reg = (unsigned long *) frame;
+	for (loop = 0; loop < NR_PT_REGS; loop++) {
+		printk("%s %08lx", regnames[loop + 0], reg[loop + 0]);
 
-		if (loop == REG__END - 1 || loop % 5 == 4)
+		if (loop == NR_PT_REGS - 1 || loop % 5 == 4)
 			printk("\n");
 		else
 			printk(" | ");

arch/frv/mb93090-mb00/pci-vdk.c

@@ -406,7 +406,9 @@ int __init pcibios_init(void)
 	ioport_resource.end	= (__reg_MB86943_sl_pci_io_range << 9) | 0x3ff;
 	ioport_resource.end	+= ioport_resource.start;
 
-	printk("PCI IO window:  %08lx-%08lx\n", ioport_resource.start, ioport_resource.end);
+	printk("PCI IO window:  %08llx-%08llx\n",
+	       (unsigned long long) ioport_resource.start,
+	       (unsigned long long) ioport_resource.end);
 
 	iomem_resource.start	= (__reg_MB86943_sl_pci_mem_base << 9) & 0xfffffc00;
 
@@ -416,8 +418,11 @@ int __init pcibios_init(void)
 	iomem_resource.end	= (__reg_MB86943_sl_pci_mem_range << 9) | 0x3ff;
 	iomem_resource.end	+= iomem_resource.start;
 
-	printk("PCI MEM window: %08lx-%08lx\n", iomem_resource.start, iomem_resource.end);
-	printk("PCI DMA memory: %08lx-%08lx\n", dma_coherent_mem_start, dma_coherent_mem_end);
+	printk("PCI MEM window: %08llx-%08llx\n",
+	       (unsigned long long) iomem_resource.start,
+	       (unsigned long long) iomem_resource.end);
+	printk("PCI DMA memory: %08lx-%08lx\n",
+	       dma_coherent_mem_start, dma_coherent_mem_end);
 
 	if (!pci_probe)
 		return -ENXIO;

arch/i386/defconfig

@@ -197,7 +197,7 @@ CONFIG_PM=y
 # CONFIG_PM_LEGACY is not set
 # CONFIG_PM_DEBUG is not set
 CONFIG_SOFTWARE_SUSPEND=y
-CONFIG_PM_STD_PARTITION="/dev/hda2"
+CONFIG_PM_STD_PARTITION=""
 
 #
 # ACPI (Advanced Configuration and Power Interface) Support

arch/i386/kernel/crash.c

@@ -90,7 +90,7 @@ static void crash_save_self(struct pt_regs *regs)
 	crash_save_this_cpu(regs, cpu);
 }
 
-#ifdef CONFIG_SMP
+#if defined(CONFIG_SMP) && defined(CONFIG_X86_LOCAL_APIC)
 static atomic_t waiting_for_crash_ipi;
 
 static int crash_nmi_callback(struct pt_regs *regs, int cpu)

arch/i386/kernel/ioport.c

@@ -79,6 +79,7 @@ asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on)
 
 		memset(bitmap, 0xff, IO_BITMAP_BYTES);
 		t->io_bitmap_ptr = bitmap;
+		set_thread_flag(TIF_IO_BITMAP);
 	}
 
 	/*

arch/i386/kernel/process.c

@@ -359,16 +359,16 @@ EXPORT_SYMBOL(kernel_thread);
  */
 void exit_thread(void)
 {
-	struct task_struct *tsk = current;
-	struct thread_struct *t = &tsk->thread;
-
 	/* The process may have allocated an io port bitmap... nuke it. */
-	if (unlikely(NULL != t->io_bitmap_ptr)) {
+	if (unlikely(test_thread_flag(TIF_IO_BITMAP))) {
+		struct task_struct *tsk = current;
+		struct thread_struct *t = &tsk->thread;
 		int cpu = get_cpu();
 		struct tss_struct *tss = &per_cpu(init_tss, cpu);
 
 		kfree(t->io_bitmap_ptr);
 		t->io_bitmap_ptr = NULL;
+		clear_thread_flag(TIF_IO_BITMAP);
 		/*
 		 * Careful, clear this in the TSS too:
 		 */
@@ -387,6 +387,7 @@ void flush_thread(void)
 
 	memset(tsk->thread.debugreg, 0, sizeof(unsigned long)*8);
 	memset(tsk->thread.tls_array, 0, sizeof(tsk->thread.tls_array));	
+	clear_tsk_thread_flag(tsk, TIF_DEBUG);
 	/*
 	 * Forget coprocessor state..
 	 */
@@ -431,7 +432,7 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long esp,
 	savesegment(gs,p->thread.gs);
 
 	tsk = current;
-	if (unlikely(NULL != tsk->thread.io_bitmap_ptr)) {
+	if (unlikely(test_tsk_thread_flag(tsk, TIF_IO_BITMAP))) {
 		p->thread.io_bitmap_ptr = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL);
 		if (!p->thread.io_bitmap_ptr) {
 			p->thread.io_bitmap_max = 0;
@@ -439,6 +440,7 @@ int copy_thread(int nr, unsigned long clone_flags, unsigned long esp,
 		}
 		memcpy(p->thread.io_bitmap_ptr, tsk->thread.io_bitmap_ptr,
 			IO_BITMAP_BYTES);
+		set_tsk_thread_flag(p, TIF_IO_BITMAP);
 	}
 
 	/*
@@ -533,10 +535,24 @@ int dump_task_regs(struct task_struct *tsk, elf_gregset_t *regs)
 	return 1;
 }
 
-static inline void
-handle_io_bitmap(struct thread_struct *next, struct tss_struct *tss)
+static noinline void __switch_to_xtra(struct task_struct *next_p,
+				    struct tss_struct *tss)
 {
-	if (!next->io_bitmap_ptr) {
+	struct thread_struct *next;
+
+	next = &next_p->thread;
+
+	if (test_tsk_thread_flag(next_p, TIF_DEBUG)) {
+		set_debugreg(next->debugreg[0], 0);
+		set_debugreg(next->debugreg[1], 1);
+		set_debugreg(next->debugreg[2], 2);
+		set_debugreg(next->debugreg[3], 3);
+		/* no 4 and 5 */
+		set_debugreg(next->debugreg[6], 6);
+		set_debugreg(next->debugreg[7], 7);
+	}
+
+	if (!test_tsk_thread_flag(next_p, TIF_IO_BITMAP)) {
 		/*
 		 * Disable the bitmap via an invalid offset. We still cache
 		 * the previous bitmap owner and the IO bitmap contents:
@@ -544,6 +560,7 @@ handle_io_bitmap(struct thread_struct *next, struct tss_struct *tss)
 		tss->io_bitmap_base = INVALID_IO_BITMAP_OFFSET;
 		return;
 	}
+
 	if (likely(next == tss->io_bitmap_owner)) {
 		/*
 		 * Previous owner of the bitmap (hence the bitmap content)
@@ -671,20 +688,11 @@ struct task_struct fastcall * __switch_to(struct task_struct *prev_p, struct tas
 		set_iopl_mask(next->iopl);
 
 	/*
-	 * Now maybe reload the debug registers
+	 * Now maybe handle debug registers and/or IO bitmaps
 	 */
-	if (unlikely(next->debugreg[7])) {
-		set_debugreg(next->debugreg[0], 0);
-		set_debugreg(next->debugreg[1], 1);
-		set_debugreg(next->debugreg[2], 2);
-		set_debugreg(next->debugreg[3], 3);
-		/* no 4 and 5 */
-		set_debugreg(next->debugreg[6], 6);
-		set_debugreg(next->debugreg[7], 7);
-	}
-
-	if (unlikely(prev->io_bitmap_ptr || next->io_bitmap_ptr))
-		handle_io_bitmap(next, tss);
+	if (unlikely((task_thread_info(next_p)->flags & _TIF_WORK_CTXSW))
+	    || test_tsk_thread_flag(prev_p, TIF_IO_BITMAP))
+		__switch_to_xtra(next_p, tss);
 
 	disable_tsc(prev_p, next_p);
 

arch/i386/kernel/ptrace.c

@@ -468,8 +468,11 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
 				  for(i=0; i<4; i++)
 					  if ((0x5f54 >> ((data >> (16 + 4*i)) & 0xf)) & 1)
 						  goto out_tsk;
+				  if (data)
+					  set_tsk_thread_flag(child, TIF_DEBUG);
+				  else
+					  clear_tsk_thread_flag(child, TIF_DEBUG);
 			  }
-
 			  addr -= (long) &dummy->u_debugreg;
 			  addr = addr >> 2;
 			  child->thread.debugreg[addr] = data;

arch/i386/kernel/setup.c

@@ -26,7 +26,7 @@
 #include <linux/sched.h>
 #include <linux/mm.h>
 #include <linux/mmzone.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/ioport.h>
 #include <linux/acpi.h>
 #include <linux/apm_bios.h>
@@ -1327,7 +1327,10 @@ legacy_init_iomem_resources(struct resource *code_resource, struct resource *dat
 		res->start = e820.map[i].addr;
 		res->end = res->start + e820.map[i].size - 1;
 		res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
-		request_resource(&iomem_resource, res);
+		if (request_resource(&iomem_resource, res)) {
+			kfree(res);
+			continue;
+		}
 		if (e820.map[i].type == E820_RAM) {
 			/*
 			 *  We don't know which RAM region contains kernel data,

arch/i386/kernel/time.c

@@ -206,15 +206,16 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 unsigned long get_cmos_time(void)
 {
 	unsigned long retval;
+	unsigned long flags;
 
-	spin_lock(&rtc_lock);
+	spin_lock_irqsave(&rtc_lock, flags);
 
 	if (efi_enabled)
 		retval = efi_get_time();
 	else
 		retval = mach_get_cmos_time();
 
-	spin_unlock(&rtc_lock);
+	spin_unlock_irqrestore(&rtc_lock, flags);
 
 	return retval;
 }

arch/i386/kernel/traps.c

@@ -100,13 +100,13 @@ int register_die_notifier(struct notifier_block *nb)
 	vmalloc_sync_all();
 	return atomic_notifier_chain_register(&i386die_chain, nb);
 }
-EXPORT_SYMBOL(register_die_notifier);
+EXPORT_SYMBOL(register_die_notifier); /* used modular by kdb */
 
 int unregister_die_notifier(struct notifier_block *nb)
 {
 	return atomic_notifier_chain_unregister(&i386die_chain, nb);
 }
-EXPORT_SYMBOL(unregister_die_notifier);
+EXPORT_SYMBOL(unregister_die_notifier); /* used modular by kdb */
 
 static inline int valid_stack_ptr(struct thread_info *tinfo, void *p)
 {
@@ -324,35 +324,35 @@ void show_registers(struct pt_regs *regs)
 
 static void handle_BUG(struct pt_regs *regs)
 {
+	unsigned long eip = regs->eip;
 	unsigned short ud2;
-	unsigned short line;
-	char *file;
-	char c;
-	unsigned long eip;
-
-	eip = regs->eip;
 
 	if (eip < PAGE_OFFSET)
-		goto no_bug;
+		return;
 	if (__get_user(ud2, (unsigned short __user *)eip))
-		goto no_bug;
+		return;
 	if (ud2 != 0x0b0f)
-		goto no_bug;
-	if (__get_user(line, (unsigned short __user *)(eip + 2)))
-		goto bug;
-	if (__get_user(file, (char * __user *)(eip + 4)) ||
-		(unsigned long)file < PAGE_OFFSET || __get_user(c, file))
-		file = "<bad filename>";
+		return;
 
 	printk(KERN_EMERG "------------[ cut here ]------------\n");
-	printk(KERN_EMERG "kernel BUG at %s:%d!\n", file, line);
 
-no_bug:
-	return;
+#ifdef CONFIG_DEBUG_BUGVERBOSE
+	do {
+		unsigned short line;
+		char *file;
+		char c;
 
-	/* Here we know it was a BUG but file-n-line is unavailable */
-bug:
-	printk(KERN_EMERG "Kernel BUG\n");
+		if (__get_user(line, (unsigned short __user *)(eip + 2)))
+			break;
+		if (__get_user(file, (char * __user *)(eip + 4)) ||
+		    (unsigned long)file < PAGE_OFFSET || __get_user(c, file))
+			file = "<bad filename>";
+
+		printk(KERN_EMERG "kernel BUG at %s:%d!\n", file, line);
+		return;
+	} while (0);
+#endif
+	printk(KERN_EMERG "Kernel BUG at [verbose debug info unavailable]\n");
 }
 
 /* This is gone through when something in the kernel

arch/i386/lib/usercopy.c

@@ -843,7 +843,6 @@ unsigned long __copy_from_user_ll_nocache_nozero(void *to, const void __user *fr
 unsigned long
 copy_to_user(void __user *to, const void *from, unsigned long n)
 {
-	might_sleep();
 	BUG_ON((long) n < 0);
 	if (access_ok(VERIFY_WRITE, to, n))
 		n = __copy_to_user(to, from, n);
@@ -870,7 +869,6 @@ EXPORT_SYMBOL(copy_to_user);
 unsigned long
 copy_from_user(void *to, const void __user *from, unsigned long n)
 {
-	might_sleep();
 	BUG_ON((long) n < 0);
 	if (access_ok(VERIFY_READ, from, n))
 		n = __copy_from_user(to, from, n);

arch/i386/oprofile/nmi_int.c

@@ -13,6 +13,7 @@
 #include <linux/oprofile.h>
 #include <linux/sysdev.h>
 #include <linux/slab.h>
+#include <linux/moduleparam.h>
 #include <asm/nmi.h>
 #include <asm/msr.h>
 #include <asm/apic.h>
@@ -296,12 +297,14 @@ static int nmi_create_files(struct super_block * sb, struct dentry * root)
 	return 0;
 }
  
+static int p4force;
+module_param(p4force, int, 0);
  
 static int __init p4_init(char ** cpu_type)
 {
 	__u8 cpu_model = boot_cpu_data.x86_model;
 
-	if (cpu_model > 4)
+	if (!p4force && (cpu_model > 6 || cpu_model == 5))
 		return 0;
 
 #ifndef CONFIG_SMP

arch/i386/pci/common.c

@@ -17,10 +17,6 @@
 
 #include "pci.h"
 
-#ifdef CONFIG_PCI_BIOS
-extern  void pcibios_sort(void);
-#endif
-
 unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
 				PCI_PROBE_MMCONF;
 

arch/i386/pci/pci.h

@@ -84,4 +84,4 @@ extern int pci_conf1_read(unsigned int seg, unsigned int bus,
 extern void pci_direct_init(void);
 extern void pci_pcbios_init(void);
 extern void pci_mmcfg_init(void);
-
+extern void pcibios_sort(void);

arch/ia64/dig/setup.c

@@ -14,7 +14,7 @@
 #include <linux/kernel.h>
 #include <linux/kdev_t.h>
 #include <linux/string.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/console.h>
 #include <linux/timex.h>
 #include <linux/sched.h>

arch/ia64/kernel/efi.c

@@ -759,7 +759,7 @@ valid_phys_addr_range (unsigned long phys_addr, unsigned long size)
 }
 
 int
-valid_mmap_phys_addr_range (unsigned long phys_addr, unsigned long size)
+valid_mmap_phys_addr_range (unsigned long pfn, unsigned long size)
 {
 	/*
 	 * MMIO regions are often missing from the EFI memory map.

arch/ia64/kernel/setup.c

@@ -35,7 +35,7 @@
 #include <linux/seq_file.h>
 #include <linux/string.h>
 #include <linux/threads.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/dmi.h>
 #include <linux/serial.h>
 #include <linux/serial_core.h>

arch/ia64/pci/pci.c

@@ -650,7 +650,7 @@ pci_mmap_legacy_page_range(struct pci_bus *bus, struct vm_area_struct *vma)
 	 * Avoid attribute aliasing.  See Documentation/ia64/aliasing.txt
 	 * for more details.
 	 */
-	if (!valid_mmap_phys_addr_range(vma->vm_pgoff << PAGE_SHIFT, size))
+	if (!valid_mmap_phys_addr_range(vma->vm_pgoff, size))
 		return -EINVAL;
 	prot = phys_mem_access_prot(NULL, vma->vm_pgoff, size,
 				    vma->vm_page_prot);

arch/ia64/sn/kernel/setup.c

@@ -12,7 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/kdev_t.h>
 #include <linux/string.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/console.h>
 #include <linux/timex.h>
 #include <linux/sched.h>

arch/m32r/kernel/setup.c

@@ -21,7 +21,7 @@
 #include <linux/root_dev.h>
 #include <linux/seq_file.h>
 #include <linux/timex.h>
-#include <linux/tty.h>
+#include <linux/screen_info.h>
 #include <linux/cpu.h>
 #include <linux/nodemask.h>
 #include <linux/pfn.h>

arch/mips/Kconfig

@@ -480,6 +480,7 @@ config MOMENCO_OCELOT_G
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
+	select ARCH_SPARSEMEM_ENABLE
 	help
 	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
 	  Momentum Computer <http://www.momenco.com/>.
@@ -556,6 +557,7 @@ config QEMU
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
+	select ARCH_SPARSEMEM_ENABLE
 	help
 	  Qemu is a software emulator which among other architectures also
 	  can simulate a MIPS32 4Kc system.  This patch adds support for the
@@ -594,7 +596,6 @@ config SGI_IP22
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_BIG_ENDIAN
-	select SYS_SUPPORTS_SMP
 	help
 	  This are the SGI Indy, Challenge S and Indigo2, as well as certain
 	  OEM variants like the Tandem CMN B006S. To compile a Linux kernel
@@ -1688,6 +1689,13 @@ config ARCH_DISCONTIGMEM_ENABLE
 	  or have huge holes in the physical address space for other reasons.
 	  See <file:Documentation/vm/numa> for more.
 
+config ARCH_SPARSEMEM_ENABLE
+	bool
+
+config ARCH_SPARSEMEM_ENABLE
+	bool
+	select SPARSEMEM_STATIC
+
 config NUMA
 	bool "NUMA Support"
 	depends on SYS_SUPPORTS_NUMA

arch/mips/Kconfig.debug

@@ -1,5 +1,9 @@
 menu "Kernel hacking"
 
+config TRACE_IRQFLAGS_SUPPORT
+	bool
+	default y
+
 source "lib/Kconfig.debug"
 
 config CROSSCOMPILE

arch/mips/Makefile

@@ -712,16 +712,14 @@ endif
 vmlinux.bin: $(vmlinux-32)
 	+@$(call makeboot,$@)
 
-vmlinux.ecoff vmlinux.rm200: $(vmlinux-32)
+vmlinux.ecoff: $(vmlinux-32)
 	+@$(call makeboot,$@)
 
 vmlinux.srec: $(vmlinux-32)
 	+@$(call makeboot,$@)
 
 CLEAN_FILES += vmlinux.ecoff \
-	       vmlinux.srec \
-	       vmlinux.rm200.tmp \
-	       vmlinux.rm200
+	       vmlinux.srec
 
 archclean:
 	@$(MAKE) $(clean)=arch/mips/boot

arch/mips/au1000/common/irq.c

@@ -251,7 +251,7 @@ void restore_local_and_enable(int controller, unsigned long mask)
 }
 
 
-static struct hw_interrupt_type rise_edge_irq_type = {
+static struct irq_chip rise_edge_irq_type = {
 	.typename = "Au1000 Rise Edge",
 	.startup = startup_irq,
 	.shutdown = shutdown_irq,
@@ -261,7 +261,7 @@ static struct hw_interrupt_type rise_edge_irq_type = {
 	.end = end_irq,
 };
 
-static struct hw_interrupt_type fall_edge_irq_type = {
+static struct irq_chip fall_edge_irq_type = {
 	.typename = "Au1000 Fall Edge",
 	.startup = startup_irq,
 	.shutdown = shutdown_irq,
@@ -271,7 +271,7 @@ static struct hw_interrupt_type fall_edge_irq_type = {
 	.end = end_irq,
 };
 
-static struct hw_interrupt_type either_edge_irq_type = {
+static struct irq_chip either_edge_irq_type = {
 	.typename = "Au1000 Rise or Fall Edge",
 	.startup = startup_irq,
 	.shutdown = shutdown_irq,
@@ -281,7 +281,7 @@ static struct hw_interrupt_type either_edge_irq_type = {
 	.end = end_irq,
 };
 
-static struct hw_interrupt_type level_irq_type = {
+static struct irq_chip level_irq_type = {
 	.typename = "Au1000 Level",
 	.startup = startup_irq,
 	.shutdown = shutdown_irq,

arch/mips/au1000/common/prom.c

@@ -1,7 +1,7 @@
 /*
  *
  * BRIEF MODULE DESCRIPTION
- *    PROM library initialisation code, assuming YAMON is the boot loader.
+ *    PROM library initialisation code, supports YAMON and U-Boot.
  *
  * Copyright 2000, 2001, 2006 MontaVista Software Inc.
  * Author: MontaVista Software, Inc.
@@ -46,12 +46,6 @@
 extern int prom_argc;
 extern char **prom_argv, **prom_envp;
 
-typedef struct
-{
-	char *name;
-	char *val;
-} t_env_var;
-
 
 char * prom_getcmdline(void)
 {
@@ -84,13 +78,21 @@ char *prom_getenv(char *envname)
 {
 	/*
 	 * Return a pointer to the given environment variable.
+	 * YAMON uses "name", "value" pairs, while U-Boot uses "name=value".
 	 */
 
-	t_env_var *env = (t_env_var *)prom_envp;
+	char **env = prom_envp;
+	int i = strlen(envname);
+	int yamon = (*env && strchr(*env, '=') == NULL);
 
-	while (env->name) {
-		if (strcmp(envname, env->name) == 0)
-			return env->val;
+	while (*env) {
+		if (yamon) {
+			if (strcmp(envname, *env++) == 0)
+				return *env;
+		} else {
+			if (strncmp(envname, *env, i) == 0 && (*env)[i] == '=')
+				return *env + i + 1;
+		}
 		env++;
 	}
 	return NULL;

arch/mips/au1000/common/setup.c

@@ -51,7 +51,6 @@ extern void au1000_power_off(void);
 extern void au1x_time_init(void);
 extern void au1x_timer_setup(struct irqaction *irq);
 extern void au1xxx_time_init(void);
-extern void au1xxx_timer_setup(struct irqaction *irq);
 extern void set_cpuspec(void);
 
 void __init plat_mem_setup(void)
@@ -123,7 +122,6 @@ void __init plat_mem_setup(void)
 	_machine_halt = au1000_halt;
 	pm_power_off = au1000_power_off;
 	board_time_init = au1xxx_time_init;
-	board_timer_setup = au1xxx_timer_setup;
 
 	/* IO/MEM resources. */
 	set_io_port_base(0);

arch/mips/au1000/common/time.c

@@ -383,7 +383,7 @@ static unsigned long do_fast_pm_gettimeoffset(void)
 }
 #endif
 
-void __init au1xxx_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
 {
 	unsigned int est_freq;
 

arch/mips/au1000/csb250/Makefile

@@ -1,8 +0,0 @@
-#
-#  Copyright 2002 Cogent Computer Systems
-#     	dan@embeddededge.com
-#
-# Makefile for the Cogent CSB250 Au1500 board.  Copied from Pb1500.
-#
-
-obj-y := init.o board_setup.o irqmap.o

arch/mips/au1000/csb250/board_setup.c

@@ -1,238 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Cogent CSB250 board setup.
- *
- * Copyright 2002 Cogent Computer Systems, Inc.
- *	dan@embeddededge.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/mc146818rtc.h>
-#include <linux/delay.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/keyboard.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
-#include <asm/au1000.h>
-#include <asm/csb250.h>
-
-extern int (*board_pci_idsel)(unsigned int devsel, int assert);
-int	csb250_pci_idsel(unsigned int devsel, int assert);
-
-void __init board_setup(void)
-{
-	u32 pin_func, pin_val;
-	u32 sys_freqctrl, sys_clksrc;
-
-
-	// set AUX clock to 12MHz * 8 = 96 MHz
-	au_writel(8, SYS_AUXPLL);
-	au_writel(0, SYS_PINSTATERD);
-	udelay(100);
-
-#if defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
-
-	/* GPIO201 is input for PCMCIA card detect */
-	/* GPIO203 is input for PCMCIA interrupt request */
-	au_writel(au_readl(GPIO2_DIR) & (u32)(~((1<<1)|(1<<3))), GPIO2_DIR);
-
-	/* zero and disable FREQ2 */
-	sys_freqctrl = au_readl(SYS_FREQCTRL0);
-	sys_freqctrl &= ~0xFFF00000;
-	au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
-	/* zero and disable USBH/USBD clocks */
-	sys_clksrc = au_readl(SYS_CLKSRC);
-	sys_clksrc &= ~0x00007FE0;
-	au_writel(sys_clksrc, SYS_CLKSRC);
-
-	sys_freqctrl = au_readl(SYS_FREQCTRL0);
-	sys_freqctrl &= ~0xFFF00000;
-
-	sys_clksrc = au_readl(SYS_CLKSRC);
-	sys_clksrc &= ~0x00007FE0;
-
-	// FREQ2 = aux/2 = 48 MHz
-	sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
-	au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
-	/*
-	 * Route 48MHz FREQ2 into USB Host and/or Device
-	 */
-#ifdef CONFIG_USB_OHCI
-	sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
-#endif
-#ifdef CONFIG_AU1X00_USB_DEVICE
-	sys_clksrc |= ((4<<7) | (0<<6) | (0<<5));
-#endif
-	au_writel(sys_clksrc, SYS_CLKSRC);
-
-
-	pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
-#ifndef CONFIG_AU1X00_USB_DEVICE
-	// 2nd USB port is USB host
-	pin_func |= 0x8000;
-#endif
-	au_writel(pin_func, SYS_PINFUNC);
-#endif // defined (CONFIG_USB_OHCI) || defined (CONFIG_AU1X00_USB_DEVICE)
-
-	/* Configure GPIO2....it's used by PCI among other things.
-	*/
-
-	/* Make everything but GP200 (PCI RST) an input until we get
-	 * the pins set correctly.
-	 */
-	au_writel(0x00000001, GPIO2_DIR);
-
-	/* Set the pins used for output.
-	 * A zero bit will leave PCI reset, LEDs off, power up USB,
-	 * IDSEL disabled.
-	 */
-	pin_val = ((3 << 30) | (7 << 19) | (1 << 17) | (1 << 16));
-	au_writel(pin_val, GPIO2_OUTPUT);
-
-	/* Set the output direction.
-	*/
-	pin_val = ((3 << 14) | (7 << 3) | (1 << 1) | (1 << 0));
-	au_writel(pin_val, GPIO2_DIR);
-
-#ifdef CONFIG_PCI
-	/* Use FREQ1 for the PCI output clock.  We use the
-	 * CPU clock of 384 MHz divided by 12 to get 32 MHz PCI.
-	 * If Michael changes the CPU speed, we need to adjust
-	 * that here as well :-).
-	 */
-
-	/* zero and disable FREQ1
-	*/
-	sys_freqctrl = au_readl(SYS_FREQCTRL0);
-	sys_freqctrl &= ~0x000ffc00;
-	au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
-	/* zero and disable PCI clock
-	*/
-	sys_clksrc = au_readl(SYS_CLKSRC);
-	sys_clksrc &= ~0x000f8000;
-	au_writel(sys_clksrc, SYS_CLKSRC);
-
-	/* Get current values (which really should match above).
-	*/
-	sys_freqctrl = au_readl(SYS_FREQCTRL0);
-	sys_freqctrl &= ~0x000ffc00;
-
-	sys_clksrc = au_readl(SYS_CLKSRC);
-	sys_clksrc &= ~0x000f8000;
-
-	/* FREQ1 = cpu/12 = 32 MHz
-	*/
-	sys_freqctrl |= ((5<<12) | (1<<11) | (0<<10));
-	au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
-	/* Just connect the clock without further dividing.
-	*/
-	sys_clksrc |= ((3<<17) | (0<<16) | (0<<15));
-	au_writel(sys_clksrc, SYS_CLKSRC);
-
-	udelay(1);
-
-	/* Now that clocks should be running, take PCI out of reset.
-	*/
-	pin_val = au_readl(GPIO2_OUTPUT);
-	pin_val |= ((1 << 16) | 1);
-	au_writel(pin_val, GPIO2_OUTPUT);
-
-	// Setup PCI bus controller
-	au_writel(0, Au1500_PCI_CMEM);
-	au_writel(0x00003fff, Au1500_CFG_BASE);
-
-	/* We run big endian without any of the software byte swapping,
-	 * so configure the PCI bridge to help us out.
-	 */
-	au_writel(0xf | (2<<6) | (1<<5) | (1<<4), Au1500_PCI_CFG);
-
-	au_writel(0xf0000000, Au1500_PCI_MWMASK_DEV);
-	au_writel(0, Au1500_PCI_MWBASE_REV_CCL);
-	au_writel(0x02a00356, Au1500_PCI_STATCMD);
-	au_writel(0x00003c04, Au1500_PCI_HDRTYPE);
-	au_writel(0x00000008, Au1500_PCI_MBAR);
-	au_sync();
-
-	board_pci_idsel = csb250_pci_idsel;
-#endif
-
-	/* Enable sys bus clock divider when IDLE state or no bus activity. */
-	au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
-
-#ifdef CONFIG_RTC
-	// Enable the RTC if not already enabled
-	if (!(au_readl(0xac000028) & 0x20)) {
-		printk("enabling clock ...\n");
-		au_writel((au_readl(0xac000028) | 0x20), 0xac000028);
-	}
-	// Put the clock in BCD mode
-	if (readl(0xac00002C) & 0x4) { /* reg B */
-		au_writel(au_readl(0xac00002c) & ~0x4, 0xac00002c);
-		au_sync();
-	}
-#endif
-}
-
-/* The IDSEL is selected in the GPIO2 register.  We will make device
- * 12 appear in slot 0 and device 13 appear in slot 1.
- */
-int
-csb250_pci_idsel(unsigned int devsel, int assert)
-{
-	int		retval;
-	unsigned int	gpio2_pins;
-
-	retval = 1;
-
-	/* First, disable both selects, then assert the one requested.
-	*/
-	au_writel(0xc000c000, GPIO2_OUTPUT);
-	au_sync();
-
-	if (assert) {
-		if (devsel == 12)
-			gpio2_pins = 0x40000000;
-		else if (devsel == 13)
-			gpio2_pins = 0x80000000;
-		else {
-			gpio2_pins = 0xc000c000;
-			retval = 0;
-		}
-		au_writel(gpio2_pins, GPIO2_OUTPUT);
-	}
-	au_sync();
-
-	return retval;
-}

arch/mips/au1000/csb250/init.c

@@ -1,94 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Cogent CSB250 board setup
- *
- * Copyright 2002 Cogent Computer Systems, Inc.
- * 	dan@embeddededge.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-
-int prom_argc;
-char **prom_argv, **prom_envp;
-extern void  __init prom_init_cmdline(void);
-extern char *prom_getenv(char *envname);
-
-/* When we get initrd working someday.........
-*/
-int	my_initrd_start, my_initrd_size;
-
-/* Start arguments and environment.
-*/
-static char	*csb_env[2];
-static char	*csb_arg[4];
-static char	*arg1 = "console=ttyS3,38400";
-static char	*arg2 = "root=/dev/nfs rw ip=any";
-static char	*env1 = "ethaddr=00:30:23:50:00:00";
-
-const char *get_system_type(void)
-{
-	return "Cogent CSB250";
-}
-
-int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
-{
-	unsigned char *memsize_str;
-	unsigned long memsize;
-
-	/* We use a0 and a1 to pass initrd start and size.
-	*/
-	if (((unsigned int) argc > 0) && ((uint)argv > 0)) {
-		my_initrd_start = (unsigned int)argc;
-		my_initrd_size = (unsigned int)argv;
-	}
-
-	/* First argv is ignored.
-	*/
-	prom_argc = 3;
-	prom_argv = csb_arg;
-	prom_envp = csb_env;
-	csb_arg[1] = arg1;
-	csb_arg[2] = arg2;
-	csb_env[0] = env1;
-
-	mips_machgroup = MACH_GROUP_ALCHEMY;
-	mips_machtype = MACH_CSB250;
-
-	prom_init_cmdline();
-	memsize_str = prom_getenv("memsize");
-	if (!memsize_str) {
-		memsize = 0x02000000;
-	} else {
-		memsize = simple_strtol(memsize_str, NULL, 0);
-	}
-	add_memory_region(0, memsize, BOOT_MEM_RAM);
-	return 0;
-}

arch/mips/au1000/csb250/irqmap.c

@@ -1,60 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Au1xxx irq map table
- *
- * Copyright 2003 Embedded Edge, LLC
- *		dan@embeddededge.com
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
- *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
- *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
-
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-#include <asm/au1000.h>
-
-au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
-
-	{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
-	{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 },
-	{ AU1500_GPIO_207, INTC_INT_LOW_LEVEL, 0 },
-};
-
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);

arch/mips/au1000/hydrogen3/Makefile

@@ -1,9 +0,0 @@
-#
-#  Copyright 2000 MontaVista Software Inc.
-#  Author: MontaVista Software, Inc.
-#     	ppopov@mvista.com or source@mvista.com
-#
-# Makefile for the Alchemy Semiconductor PB1000 board.
-#
-
-obj-y := init.o board_setup.o irqmap.o

arch/mips/au1000/hydrogen3/board_setup.c

@@ -1,69 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	Alchemy Db1x00 board setup.
- *
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov@mvista.com or source@mvista.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/console.h>
-#include <linux/mc146818rtc.h>
-#include <linux/delay.h>
-
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/keyboard.h>
-#include <asm/mipsregs.h>
-#include <asm/reboot.h>
-#include <asm/pgtable.h>
-#include <asm/au1000.h>
-
-void board_reset (void)
-{
-}
-
-void __init board_setup(void)
-{
-	u32 pin_func;
-
-#ifdef CONFIG_AU1X00_USB_DEVICE
-	// 2nd USB port is USB device
-	pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
-	au_writel(pin_func, SYS_PINFUNC);
-#endif
-
-#if defined(CONFIG_IRDA) && (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
-	/* set IRFIRSEL instead of GPIO15 */
-	pin_func = au_readl(SYS_PINFUNC) | (u32)((1<<8));
-	au_writel(pin_func, SYS_PINFUNC);
-	au_sync();
-#endif
-
-    printk("AMD Alchemy Hydrogen3 Board\n");
-}

arch/mips/au1000/hydrogen3/init.c

@@ -1,75 +0,0 @@
-/*
- *
- * BRIEF MODULE DESCRIPTION
- *	PB1000 board setup
- *
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- *         	ppopov@mvista.com or source@mvista.com
- *
- *  This program is free software; you can redistribute  it and/or modify it
- *  under  the terms of  the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the  License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
- *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
- *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/bootmem.h>
-#include <asm/addrspace.h>
-#include <asm/bootinfo.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-
-int prom_argc;
-char **prom_argv, **prom_envp;
-extern void  __init prom_init_cmdline(void);
-extern char *prom_getenv(char *envname);
-
-const char *get_system_type(void)
-{
-#ifdef CONFIG_MIPS_BOSPORUS
-	return "Alchemy Bosporus Gateway Reference";
-#else
-	return "Alchemy Db1x00";
-#endif
-}
-
-int __init prom_init(int argc, char **argv, char **envp, int *prom_vec)
-{
-	unsigned char *memsize_str;
-	unsigned long memsize;
-
-	prom_argc = argc;
-	prom_argv = argv;
-	prom_envp = envp;
-
-	mips_machgroup = MACH_GROUP_ALCHEMY;
-	mips_machtype = MACH_DB1000;	/* set the platform # */
-	prom_init_cmdline();
-
-	memsize_str = prom_getenv("memsize");
-	if (!memsize_str) {
-		memsize = 0x04000000;
-	} else {
-		memsize = simple_strtol(memsize_str, NULL, 0);
-	}
-	add_memory_region(0, memsize, BOOT_MEM_RAM);
-	return 0;
-}

arch/mips/au1000/hydrogen3/irqmap.c

@@ -1,56 +0,0 @@
-/*
- * BRIEF MODULE DESCRIPTION
- *	Au1xxx irq map table
- *
- * Copyright 2003 Embedded Edge, LLC
- *		dan@embeddededge.com
- *
- *  This program is free software; you can redistribute	 it and/or modify it
- *  under  the terms of	 the GNU General  Public License as published by the
- *  Free Software Foundation;  either version 2 of the	License, or (at your
- *  option) any later version.
- *
- *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
- *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
- *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
- *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
- *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
- *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
- *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *  You should have received a copy of the  GNU General Public License along
- *  with this program; if not, write  to the Free Software Foundation, Inc.,
- *  675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
-
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-#include <asm/au1000.h>
-
-au1xxx_irq_map_t __initdata au1xxx_irq_map[] = {
-
-	/* { AU1500_GPIO_205, INTC_INT_LOW_LEVEL, 0 }, */
-	{ AU1000_GPIO_21, INTC_INT_LOW_LEVEL, 0 },
-};
-
-int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);

arch/mips/au1000/pb1200/irqmap.c

@@ -148,7 +148,7 @@ static void pb1200_end_irq(unsigned int irq_nr)
 	}
 }
 
-static struct hw_interrupt_type external_irq_type =
+static struct irq_chip external_irq_type =
 {
 #ifdef CONFIG_MIPS_PB1200
 	"Pb1200 Ext",

arch/mips/basler/excite/excite_dbg_io.c

@@ -17,7 +17,6 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/config.h>
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <linux/kernel.h>

arch/mips/basler/excite/excite_device.c

@@ -17,7 +17,6 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/config.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>

arch/mips/basler/excite/excite_iodev.c

@@ -17,7 +17,6 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/config.h>
 #include <linux/compiler.h>
 #include <linux/init.h>
 #include <linux/module.h>

arch/mips/basler/excite/excite_procfs.c

@@ -19,7 +19,6 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/config.h>
 #include <linux/proc_fs.h>
 #include <linux/stat.h>
 #include <asm/page.h>

arch/mips/basler/excite/excite_prom.c

@@ -18,7 +18,6 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/config.h>
 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/mm.h>

arch/mips/basler/excite/excite_setup.c

@@ -19,7 +19,6 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
-#include <linux/config.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -79,7 +78,7 @@ static void excite_timer_init(void)
 	mips_hpt_frequency = EXCITE_CPU_EXT_CLOCK * mult / div / 2;
 }
 
-static void excite_timer_setup(struct irqaction *irq)
+void __init plat_timer_setup(struct irqaction *irq)
 {
 	/* The eXcite platform uses the alternate timer interrupt */
 	set_c0_intcontrol(0x80);
@@ -263,7 +262,6 @@ void __init plat_mem_setup(void)
 
 	/* Set up timer initialization hooks */
 	board_time_init = excite_timer_init;
-	board_timer_setup = excite_timer_setup;
 
 	/* Set up the peripheral address map */
 	*(boot_ocd_base + (LKB9 / sizeof (u32))) = 0;