Originally, all of the control requests share a single buffer(
ctrl & input & ctrl_status fields in struct virtio_crypto), this
allows queue depth 1 only, the performance of control queue gets
limited by this design.
In this patch, each request allocates request buffer dynamically, and
free buffer after request, so the scope protected by ctrl_lock also
get optimized here.
It's possible to optimize control queue depth in the next step.
A necessary comment is already in code, still describe it again:
/*
* Note: there are padding fields in request, clear them to zero before
* sending to host to avoid to divulge any information.
* Ex, virtio_crypto_ctrl_request::ctrl::u::destroy_session::padding[48]
*/
So use kzalloc to allocate buffer of struct virtio_crypto_ctrl_request.
Potentially dereferencing uninitialized variables:
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220506131627.180784-3-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use temporary variable to make code easy to read and maintain.
/* Pad cipher's parameters */
vcrypto->ctrl.u.sym_create_session.op_type =
cpu_to_le32(VIRTIO_CRYPTO_SYM_OP_CIPHER);
vcrypto->ctrl.u.sym_create_session.u.cipher.para.algo =
vcrypto->ctrl.header.algo;
vcrypto->ctrl.u.sym_create_session.u.cipher.para.keylen =
cpu_to_le32(keylen);
vcrypto->ctrl.u.sym_create_session.u.cipher.para.op =
cpu_to_le32(op);
-->
sym_create_session = &ctrl->u.sym_create_session;
sym_create_session->op_type = cpu_to_le32(VIRTIO_CRYPTO_SYM_OP_CIPHER);
sym_create_session->u.cipher.para.algo = ctrl->header.algo;
sym_create_session->u.cipher.para.keylen = cpu_to_le32(keylen);
sym_create_session->u.cipher.para.op = cpu_to_le32(op);
The new style shows more obviously:
- the variable we want to operate.
- an assignment statement in a single line.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220506131627.180784-2-pizhenwei@bytedance.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
GCC 12 enhanced -Waddress when comparing array address to null [0],
which warns:
drivers/virtio/virtio_pci_common.c: In function ‘vp_del_vqs’:
drivers/virtio/virtio_pci_common.c:257:29: warning: the comparison will always evaluate as ‘true’ for the pointer operand in ‘vp_dev->msix_affinity_masks + (sizetype)((long unsigned int)i * 256)’ must not be NULL [-Waddress]
257 | if (vp_dev->msix_affinity_masks[i])
| ^~~~~~
In fact, the verification is comparing the result of a pointer
arithmetic, the address "msix_affinity_masks + i", which will always
evaluate to true.
Under the hood, free_cpumask_var() calls kfree(), which is safe to pass
NULL, not requiring non-null verification. So remove the verification
to make compiler happy (happy compiler, happy life).
[0] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=102103
Signed-off-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com>
Message-Id: <20220415023002.49805-1-muriloo@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Christophe de Dinechin <dinechin@redhat.com>
This patch introduces the control virtqueue support for vDPA
simulator. This is a requirement for supporting advanced features like
multiqueue.
A requirement for control virtqueue is to isolate its memory access
from the rx/tx virtqueues. This is because when using vDPA device
for VM, the control virqueue is not directly assigned to VM. Userspace
(Qemu) will present a shadow control virtqueue to control for
recording the device states.
The isolation is done via the virtqueue groups and ASID support in
vDPA through vhost-vdpa. The simulator is extended to have:
1) three virtqueues: RXVQ, TXVQ and CVQ (control virtqueue)
2) two virtqueue groups: group 0 contains RXVQ and TXVQ; group 1
contains CVQ
3) two address spaces and the simulator simply implements the address
spaces by mapping it 1:1 to IOTLB.
For the VM use cases, userspace(Qemu) may set AS 0 to group 0 and AS 1
to group 1. So we have:
1) The IOTLB for virtqueue group 0 contains the mappings of guest, so
RX and TX can be assigned to guest directly.
2) The IOTLB for virtqueue group 1 contains the mappings of CVQ which
is the buffers that allocated and managed by VMM only. So CVQ of
vhost-vdpa is visible to VMM only. And Guest can not access the CVQ
of vhost-vdpa.
For the other use cases, since AS 0 is associated to all virtqueue
groups by default. All virtqueues share the same mapping by default.
To demonstrate the function, VIRITO_NET_F_CTRL_MACADDR is
implemented in the simulator for the driver to set mac address.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-20-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch extends the vhost-vdpa to support ASID based IOTLB API. The
vhost-vdpa device will allocated multiple IOTLBs for vDPA device that
supports multiple address spaces. The IOTLBs and vDPA device memory
mappings is determined and maintained through ASID.
Note that we still don't support vDPA device with more than one
address spaces that depends on platform IOMMU. This work will be done
by moving the IOMMU logic from vhost-vDPA to vDPA device driver.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-16-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Includes fixup:
vhost-vdpa: Fix some error handling path in vhost_vdpa_process_iotlb_msg()
In the error paths introduced by the original patch, a mutex may be left locked.
Add the correct goto instead of a direct return.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <89ef0ae4c26ac3cfa440c71e97e392dcb328ac1b.1653227924.git.christophe.jaillet@wanadoo.fr>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Follows the vDPA support for multiple address spaces, this patch
introduce uAPI for the userspace to know the number of virtqueue
groups supported by the vDPA device.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-12-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch converts the vhost-vDPA device to support multiple IOTLBs
tagged via ASID via hlist. This will be used for supporting multiple
address spaces in the following patches.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-11-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patches allows userspace to send ASID based IOTLB message to
vhost. This idea is to use the reserved u32 field in the existing V2
IOTLB message. Vhost device should advertise this capability via
VHOST_BACKEND_F_IOTLB_ASID backend feature.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-10-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patches introduces the multiple address spaces support for vDPA
device. This idea is to identify a specific address space via an
dedicated identifier - ASID.
During vDPA device allocation, vDPA device driver needs to report the
number of address spaces supported by the device then the DMA mapping
ops of the vDPA device needs to be extended to support ASID.
This helps to isolate the environments for the virtqueue that will not
be assigned directly. E.g in the case of virtio-net, the control
virtqueue will not be assigned directly to guest.
As a start, simply claim 1 virtqueue groups and 1 address spaces for
all vDPA devices. And vhost-vDPA will simply reject the device with
more than 1 virtqueue groups or address spaces.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-7-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch introduces virtqueue groups to vDPA device. The virtqueue
group is the minimal set of virtqueues that must share an address
space. And the address space identifier could only be attached to
a specific virtqueue group.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-6-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To ease the implementation of per group ASID support for vDPA
device. This patch switches to use a vhost-vdpa specific IOTLB to
avoid the unnecessary refactoring of the vhost core.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-5-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
To prepare for the ASID support for vhost-vdpa, try to pass IOTLB
object to dma helpers. No functional changes, it's just a preparation
for support multiple IOTLBs.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Gautam Dawar <gdawar@xilinx.com>
Message-Id: <20220330180436.24644-4-gdawar@xilinx.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch supports mq_ops->queue_rqs() hook. It has an advantage of
batch submission to virtio-blk driver. It also helps polling I/O because
polling uses batched completion of block layer. Batch submission in
queue_rqs() can boost polling performance.
In queue_rqs(), it iterates plug->mq_list, collects requests that
belong to same HW queue until it encounters a request from other
HW queue or sees the end of the list.
Then, virtio-blk adds requests into virtqueue and kicks virtqueue
to submit requests.
If there is an error, it inserts error request to requeue_list and
passes it to ordinary block layer path.
For verification, I did fio test.
(io_uring, randread, direct=1, bs=4K, iodepth=64 numjobs=N)
I set 4 vcpu and 2 virtio-blk queues for VM and run fio test 5 times.
It shows about 2% improvement.
| numjobs=2 | numjobs=4
-----------------------------------------------------------
fio without queue_rqs() | 291K IOPS | 238K IOPS
-----------------------------------------------------------
fio with queue_rqs() | 295K IOPS | 243K IOPS
For polling I/O performance, I also did fio test as below.
(io_uring, hipri, randread, direct=1, bs=512, iodepth=64 numjobs=4)
I set 4 vcpu and 2 poll queues for VM.
It shows about 2% improvement in polling I/O.
| IOPS | avg latency
-----------------------------------------------------------
fio poll without queue_rqs() | 424K | 613.05 usec
-----------------------------------------------------------
fio poll with queue_rqs() | 435K | 601.01 usec
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Suwan Kim <suwan.kim027@gmail.com>
Message-Id: <20220406153207.163134-3-suwan.kim027@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
This patch supports polling I/O via virtio-blk driver. Polling
feature is enabled by module parameter "poll_queues" and it sets
dedicated polling queues for virtio-blk. This patch improves the
polling I/O throughput and latency.
The virtio-blk driver doesn't not have a poll function and a poll
queue and it has been operating in interrupt driven method even if
the polling function is called in the upper layer.
virtio-blk polling is implemented upon 'batched completion' of block
layer. virtblk_poll() queues completed request to io_comp_batch->req_list
and later, virtblk_complete_batch() calls unmap function and ends
the requests in batch.
virtio-blk reads the number of poll queues from module parameter
"poll_queues". If VM sets queue parameter as below,
("num-queues=N" [QEMU property], "poll_queues=M" [module parameter])
It allocates N virtqueues to virtio_blk->vqs[N] and it uses [0..(N-M-1)]
as default queues and [(N-M)..(N-1)] as poll queues. Unlike the default
queues, the poll queues have no callback function.
Regarding HW-SW queue mapping, the default queue mapping uses the
existing method that condsiders MSI irq vector. But the poll queue
doesn't have an irq, so it uses the regular blk-mq cpu mapping.
For verifying the improvement, I did Fio polling I/O performance test
with io_uring engine with the options below.
(io_uring, hipri, randread, direct=1, bs=512, iodepth=64 numjobs=N)
I set 4 vcpu and 4 virtio-blk queues - 2 default queues and 2 poll
queues for VM.
As a result, IOPS and average latency improved about 10%.
Test result:
- Fio io_uring poll without virtio-blk poll support
-- numjobs=1 : IOPS = 339K, avg latency = 188.33us
-- numjobs=2 : IOPS = 367K, avg latency = 347.33us
-- numjobs=4 : IOPS = 383K, avg latency = 682.06us
- Fio io_uring poll with virtio-blk poll support
-- numjobs=1 : IOPS = 385K, avg latency = 165.94us
-- numjobs=2 : IOPS = 408K, avg latency = 313.28us
-- numjobs=4 : IOPS = 424K, avg latency = 613.05us
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Suwan Kim <suwan.kim027@gmail.com>
Message-Id: <20220406153207.163134-2-suwan.kim027@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reading statistics could be done intensively and by several processes
concurrently. Reader's lock is sufficient in this case.
Change reslock from mutex to a rwsem.
Suggested-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220518133804.1075129-7-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Implement the get_vq_stats calback of vdpa_config_ops to return the
statistics for a virtqueue.
The statistics are provided as vendor specific statistics where the
driver provides a pair of attribute name and attribute value.
Currently supported are received descriptors and completed descriptors.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220518133804.1075129-6-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Allows to read vendor statistics of a vdpa device. The specific
statistics data are received from the upstream driver in the form of an
(attribute name, attribute value) pairs.
An example of statistics for mlx5_vdpa device are:
received_desc - number of descriptors received by the virtqueue
completed_desc - number of descriptors completed by the virtqueue
A descriptor using indirect buffers is still counted as 1. In addition,
N chained descriptors are counted correctly N times as one would expect.
A new callback was added to vdpa_config_ops which provides the means for
the vdpa driver to return statistics results.
The interface allows for reading all the supported virtqueues, including
the control virtqueue if it exists.
Below are some examples taken from mlx5_vdpa which are introduced in the
following patch:
1. Read statistics for the virtqueue at index 1
$ vdpa dev vstats show vdpa-a qidx 1
vdpa-a:
queue_type tx queue_index 1 received_desc 3844836 completed_desc 3844836
2. Read statistics for the virtqueue at index 32
$ vdpa dev vstats show vdpa-a qidx 32
vdpa-a:
queue_type control_vq queue_index 32 received_desc 62 completed_desc 62
3. Read statisitics for the virtqueue at index 0 with json output
$ vdpa -j dev vstats show vdpa-a qidx 0
{"vstats":{"vdpa-a":{
"queue_type":"rx","queue_index":0,"name":"received_desc","value":417776,\
"name":"completed_desc","value":417548}}}
4. Read statistics for the virtqueue at index 0 with preety json output
$ vdpa -jp dev vstats show vdpa-a qidx 0
{
"vstats": {
"vdpa-a": {
"queue_type": "rx",
"queue_index": 0,
"name": "received_desc",
"value": 417776,
"name": "completed_desc",
"value": 417548
}
}
}
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <20220518133804.1075129-3-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Pull fbdev fixes and updates from Helge Deller:
"A buch of small fixes and cleanups, including:
- vesafb: Fix a use-after-free due early fb_info cleanup
- clcdfb: Fix refcount leak in clcdfb_of_vram_setup
- hyperv_fb: Allow resolutions with size > 64 MB for Gen1
- pxa3xx-gcu: release the resources correctly in
pxa3xx_gcu_probe/remove()
- omapfb: Prevent compiler warning regarding
hwa742_update_window_async()"
* tag 'for-5.19/fbdev-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
video: fbdev: omap: Add prototype for hwa742_update_window_async()
video: fbdev: vesafb: Fix a use-after-free due early fb_info cleanup
video: fbdev: radeon: Fix spelling typo in comment
video: fbdev: xen: remove setting of 'transp' parameter
video: fbdev: pxa3xx-gcu: release the resources correctly in pxa3xx_gcu_probe/remove()
video: fbdev: omapfb: simplify the return expression of nec_8048_connect()
video: fbdev: omapfb: simplify the return expression of dsi_init_pll_data()
video: fbdev: clcdfb: Fix refcount leak in clcdfb_of_vram_setup
video: fbdev: hyperv_fb: Allow resolutions with size > 64 MB for Gen1
Pull parisc architecture updates from Helge Deller:
"Minor cleanups and code optimizations, e.g.:
- improvements in assembly statements in the tmpalias code path
- added some additionals compile time checks
- drop some unneccesary assembler DMA syncs"
* tag 'for-5.19/parisc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Drop __ARCH_WANT_OLD_READDIR and __ARCH_WANT_SYS_OLDUMOUNT
parisc: Optimize tmpalias function calls
parisc: Add dep_safe() macro to deposit a register in 32- and 64-kernels
parisc: Fix wrong comment for shr macro
parisc: Prevent ldil() to sign-extend into upper 32 bits
parisc: Don't hardcode assembler bit definitions in tmpalias code
parisc: Don't enforce DMA completion order in cache flushes
parisc: video: fbdev: stifb: Add sti_dump_font() to dump STI font
Pull more power management updates from Rafael Wysocki:
"These update the ARM cpufreq drivers and fix up the CPPC cpufreq
driver after recent changes, update the OPP code and PM documentation
and add power sequences support to the system reboot and power off
code.
Specifics:
- Add Tegra234 cpufreq support (Sumit Gupta)
- Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
Rex-BC Chen, and Jia-Wei Chang)
- Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
Pierre Gondois)
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana)
- Use list iterator only inside the list_for_each_entry loop
(Xiaomeng Tong, and Jakob Koschel)
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski)
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter)
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar)
- Add Out of Band mode description to the intel-speed-select utility
documentation (Srinivas Pandruvada)
- Add power sequences support to the system reboot and power off code
and make related platform-specific changes for multiple platforms
(Dmitry Osipenko, Geert Uytterhoeven)"
* tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (60 commits)
cpufreq: CPPC: Fix unused-function warning
cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE
Documentation: admin-guide: PM: Add Out of Band mode
kernel/reboot: Change registration order of legacy power-off handler
m68k: virt: Switch to new sys-off handler API
kernel/reboot: Add devm_register_restart_handler()
kernel/reboot: Add devm_register_power_off_handler()
soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
reboot: Remove pm_power_off_prepare()
regulator: pfuze100: Use devm_register_sys_off_handler()
ACPI: power: Switch to sys-off handler API
memory: emif: Use kernel_can_power_off()
mips: Use do_kernel_power_off()
ia64: Use do_kernel_power_off()
x86: Use do_kernel_power_off()
sh: Use do_kernel_power_off()
m68k: Switch to new sys-off handler API
powerpc: Use do_kernel_power_off()
xen/x86: Use do_kernel_power_off()
parisc: Use do_kernel_power_off()
...
Pull additional thermal control update from Rafael Wysocki:
"Add Meteor Lake PCI device ID to the int340x thermal control driver
(Sumeet Pawnikar)"
* tag 'thermal-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: int340x: Add Meteor Lake PCI device ID
Pull more ACPI updates from Rafael Wysocki:
"These add some new device IDs, update a few drivers (processor,
battery, backlight) and clean up code in a few places.
Specifics:
- Add Meteor Lake ACPI IDs for DPTF devices (Sumeet Pawnikar)
- Rearrange find_child_checks() to simplify code (Rafael Wysocki)
- Use memremap() to map the UCSI mailbox that is always in main
memory and drop acpi_release_memory() that has no more users
(Heikki Krogerus, Dan Carpenter)
- Make max_cstate/nocst/bm_check_disable processor module parameters
visible in sysfs (Yajun Deng)
- Fix typo in the CPPC driver (Julia Lawall)
- Make the ACPI battery driver show the "not-charging" status by
default unless "charging" or "full" is directly indicated (Werner
Sembach)
- Improve the PM notifier in the ACPI backlight driver (Zhang Rui)
- Clean up some white space in the ACPI code (Ian Cowan)"
* tag 'acpi-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
usb: typec: ucsi: acpi: fix a NULL vs IS_ERR() check in probe
ACPI: DPTF: Support Meteor Lake
ACPI: CPPC: fix typo in comment
ACPI: video: improve PM notifer callback
ACPI: clean up white space in a few places for consistency
ACPI: glue: Rearrange find_child_checks()
ACPI: processor: idle: Expose max_cstate/nocst/bm_check_disable read-only in sysfs
ACPI: battery: Make "not-charging" the default on no charging or full info
ACPI: OSL: Remove the helper for deactivating memory region
usb: typec: ucsi: acpi: Map the mailbox with memremap()
Pull overlayfs updates from Miklos Szeredi:
- Support idmapped layers in overlayfs (Christian Brauner)
- Add a fix to exportfs that is relevant to open_by_handle_at(2) as
well
- Introduce new lookup helpers that allow passing mnt_userns into
inode_permission()
* tag 'ovl-update-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
ovl: support idmapped layers
ovl: handle idmappings in ovl_xattr_{g,s}et()
ovl: handle idmappings in layer open helpers
ovl: handle idmappings in ovl_permission()
ovl: use ovl_copy_{real,upper}attr() wrappers
ovl: store lower path in ovl_inode
ovl: handle idmappings for layer lookup
ovl: handle idmappings for layer fileattrs
ovl: use ovl_path_getxattr() wrapper
ovl: use ovl_lookup_upper() wrapper
ovl: use ovl_do_notify_change() wrapper
ovl: pass layer mnt to ovl_open_realfile()
ovl: pass ofs to setattr operations
ovl: handle idmappings in creation operations
ovl: add ovl_upper_mnt_userns() wrapper
ovl: pass ofs to creation operations
ovl: use wrappers to all vfs_*xattr() calls
exportfs: support idmapped mounts
fs: add two trivial lookup helpers
Pull MIPS updates from Thomas Bogendoerfer:
"Cleanups and fixes"
* tag 'mips_5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (38 commits)
MIPS: RALINK: Define pci_remap_iospace under CONFIG_PCI_DRIVERS_GENERIC
MIPS: Use memblock_add_node() in early_parse_mem() under CONFIG_NUMA
MIPS: Return -EINVAL if mem parameter is empty in early_parse_mem()
MIPS: Kconfig: Fix indentation and add endif comment
MIPS: bmips: Fix compiler warning observed on W=1 build
MIPS: Rewrite `csum_tcpudp_nofold' in plain C
mips: setup: use strscpy to replace strlcpy
MIPS: Octeon: add SNIC10E board
MIPS: Ingenic: Refresh defconfig for CU1000-Neo and CU1830-Neo.
MIPS: Ingenic: Refresh device tree for Ingenic SoCs and boards.
MIPS: Ingenic: Add PWM nodes for X1830.
MIPS: Octeon: fix typo in comment
MIPS: loongson32: Kconfig: Remove extra space
MIPS: Sibyte: remove unnecessary return variable
MIPS: Use NOKPROBE_SYMBOL() instead of __kprobes annotation
selftests/ftrace: Save kprobe_events to test log
MIPS: tools: no need to initialise statics to 0
MIPS: Loongson: Use hwmon_device_register_with_groups() to register hwmon
MIPS: VR41xx: Drop redundant spinlock initialization
MIPS: smp: optimization for flush_tlb_mm when exiting
...
Pull m68knommu updates from Greg Ungerer:
"A collection of changes to add elf-fdpic loader support for m68k.
Also a collection of various fixes. They include typo corrections,
undefined symbol compilation fixes, removal of the ISA_DMA_API support
and removal of unused code.
Summary:
- correctly set up ZERO_PAGE pointer
- drop ISA_DMA_API support
- fix comment typos
- fixes for undefined symbols
- remove unused code and variables
- elf-fdpic loader support for m68k"
* tag 'm68knommu-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68knommu: fix 68000 CPU link with no platform selected
m68k: removed unused "mach_get_ss"
m68knommu: fix undefined reference to `mach_get_rtc_pll'
m68knommu: fix undefined reference to `_init_sp'
m68knommu: allow elf_fdpic loader to be selected
m68knommu: add definitions to support elf_fdpic program loader
m68knommu: implement minimal regset support
m68knommu: use asm-generic/mmu.h for nommu setups
m68k: fix typos in comments
m68k: coldfire: drop ISA_DMA_API support
m68knommu: set ZERO_PAGE() to the allocated zeroed page
Merge ACPI battery and backlight driver update and miscellaneous
cleanup for 5.19-rc1:
- Make the ACPI battery driver show the "not-charging" status by
default unless "charging" or "full" is directly indicated (Werner
Sembach).
- Improve the PM notifier in the ACPI backlight driver (Zhang Rui).
- Clean up some white space in the ACPI code (Ian Cowan).
* acpi-battery:
ACPI: battery: Make "not-charging" the default on no charging or full info
* acpi-video:
ACPI: video: improve PM notifer callback
* acpi-misc:
ACPI: clean up white space in a few places for consistency
Merge general ACPI cleanups and processor support updates for 5.19-rc1:
- Rearrange find_child_checks() to simplify code (Rafael Wysocki).
- Use memremap() to map the UCSI mailbox that is always in main memory
and drop acpi_release_memory() that has no more users (Heikki
Krogerus, Dan Carpenter).
- Make max_cstate/nocst/bm_check_disable processor module parameters
visible in sysfs (Yajun Deng).
- Fix typo in the CPPC driver (Julia Lawall).
* acpi-glue:
ACPI: glue: Rearrange find_child_checks()
* acpi-osl:
usb: typec: ucsi: acpi: fix a NULL vs IS_ERR() check in probe
ACPI: OSL: Remove the helper for deactivating memory region
usb: typec: ucsi: acpi: Map the mailbox with memremap()
* acpi-processor:
ACPI: processor: idle: Expose max_cstate/nocst/bm_check_disable read-only in sysfs
* acpi-cppc:
ACPI: CPPC: fix typo in comment
Merge system power off handling rework from Dmitry Osipenko for
5.19-rc1.
This introduces a mechanism allowing power sequences to be used for
powering off the system and makes related changes in platform-specific
code for multiple platforms.
* pm-sysoff: (29 commits)
kernel/reboot: Change registration order of legacy power-off handler
m68k: virt: Switch to new sys-off handler API
kernel/reboot: Add devm_register_restart_handler()
kernel/reboot: Add devm_register_power_off_handler()
soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
reboot: Remove pm_power_off_prepare()
regulator: pfuze100: Use devm_register_sys_off_handler()
ACPI: power: Switch to sys-off handler API
memory: emif: Use kernel_can_power_off()
mips: Use do_kernel_power_off()
ia64: Use do_kernel_power_off()
x86: Use do_kernel_power_off()
sh: Use do_kernel_power_off()
m68k: Switch to new sys-off handler API
powerpc: Use do_kernel_power_off()
xen/x86: Use do_kernel_power_off()
parisc: Use do_kernel_power_off()
arm64: Use do_kernel_power_off()
riscv: Use do_kernel_power_off()
csky: Use do_kernel_power_off()
...
Merge OPP (Operating Performance Points) changes for 5.19-rc1:
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana).
- Use list iterator only inside the list_for_each_entry loop (Xiaomeng
Tong, and Jakob Koschel).
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski).
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter).
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar).
* pm-opp:
opp: Reorder definition of ceil/floor helpers
opp: Add apis to retrieve opps with interconnect bandwidth
dt-bindings: opp: opp-v2-kryo-cpu: Remove SMEM
opp: use list iterator only inside the loop
opp: replace usage of found with dedicated list iterator variable
PM: opp: simplify with dev_err_probe()
OPP: call of_node_put() on error path in _bandwidth_supported()
Building the cppc_cpufreq driver with for arm64 with
CONFIG_ENERGY_MODEL=n triggers the following warnings:
drivers/cpufreq/cppc_cpufreq.c:550:12: error: ‘cppc_get_cpu_cost’ defined but not used
[-Werror=unused-function]
550 | static int cppc_get_cpu_cost(struct device *cpu_dev, unsigned long KHz,
| ^~~~~~~~~~~~~~~~~
drivers/cpufreq/cppc_cpufreq.c:481:12: error: ‘cppc_get_cpu_power’ defined but not used
[-Werror=unused-function]
481 | static int cppc_get_cpu_power(struct device *cpu_dev,
| ^~~~~~~~~~~~~~~~~~
Move the Energy Model related functions into specific guards.
This allows to fix the warning and prevent doing extra work
when the Energy Model is not present.
Fixes: 740fcdc2c2 ("cpufreq: CPPC: Register EM based on efficiency class information")
Reported-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Tested-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
If CONFIG_ACPI_CPPC_CPUFREQ_FIE is not set, building fails:
drivers/cpufreq/cppc_cpufreq.c: In function ‘populate_efficiency_class’:
drivers/cpufreq/cppc_cpufreq.c:584:2: error: ‘cppc_cpufreq_driver’ undeclared (first use in this function); did you mean ‘cpufreq_driver’?
cppc_cpufreq_driver.register_em = cppc_cpufreq_register_em;
^~~~~~~~~~~~~~~~~~~
cpufreq_driver
Make declare of cppc_cpufreq_driver out of CONFIG_ACPI_CPPC_CPUFREQ_FIE
to fix this.
Fixes: 740fcdc2c2 ("cpufreq: CPPC: Register EM based on efficiency class information")
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
