mirror of
https://github.com/torvalds/linux.git
synced 2025-12-07 20:06:24 +00:00
Merge tag 'v6.19-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: QNAP TS233 (2-bay variant of the RK3568 NAS series) and Asus Tinkerboard 3 + 3S. Additional peripherals enabled on 100ASK DshanPi A1, Orange Pi 3B, Indiedroid Nova, QNAP-TSx33 series + LED states on Radxa boards, power-domains for the previously added RK3368 display components. * tag 'v6.19-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (22 commits) arm64: dts: rockchip: enable RTC for 100ASK DshanPi A1 arm64: dts: rockchip: enable USB for 100ASK DshanPi A1 arm64: dts: rockchip: enable button for 100ASK DshanPi A1 arm64: dts: rockchip: add mmc aliases for 100ASK DshanPi A1 arm64: dts: rockchip: remove mmc max-frequency for 100ASK DshanPi A1 arm64: dts: rockchip: Enable i2c2 on Orange Pi 3B arm64: dts: rockchip: Use default-state for power LED for Radxa boards arm64: dts: rockchip: fix PCIe 3.3V regulator voltage on 9Tripod X3568 v4 arm64: dts: rockchip: Add power-domain to RK3368 VOP controller arm64: dts: rockchip: Add power-domain to RK3368 DSI controller arm64: dts: rockchip: Add host wake pin for wifi on Indiedroid Nova arm64: dts: rockchip: Correct pinctrl for pcie for Indiedroid Nova arm64: dts: rockchip: Define regulator for pcie2x1l2 on Indiedroid Nova arm64: dts: rockchip: Add clk32k_in for Indiedroid Nova arm64: dts: rockchip: Add Asus Tinker Board 3 and 3S device tree dt-bindings: arm: rockchip: Add Asus Tinker Board 3/3S dt-bindings: arm: rockchip: merge Asus Tinker and Tinker S arm64: dts: rockchip: add QNAP TS233 devicetree dt-bindings: arm: rockchip: add TS233 to RK3568-based QNAP NAS devices arm64: dts: rockchip: move common qnap tsx33 parts to dtsi ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann
@@ -89,13 +89,17 @@ properties:
|
||||
|
||||
- description: Asus Tinker board
|
||||
items:
|
||||
- const: asus,rk3288-tinker
|
||||
- enum:
|
||||
- asus,rk3288-tinker
|
||||
- asus,rk3288-tinker-s
|
||||
- const: rockchip,rk3288
|
||||
|
||||
- description: Asus Tinker board S
|
||||
- description: Asus Tinker Board 3/3S
|
||||
items:
|
||||
- const: asus,rk3288-tinker-s
|
||||
- const: rockchip,rk3288
|
||||
- enum:
|
||||
- asus,rk3566-tinker-board-3
|
||||
- asus,rk3566-tinker-board-3s
|
||||
- const: rockchip,rk3566
|
||||
|
||||
- description: Beelink A1
|
||||
items:
|
||||
@@ -889,9 +893,11 @@ properties:
|
||||
- const: prt,mecsbc
|
||||
- const: rockchip,rk3568
|
||||
|
||||
- description: QNAP TS-433-4G 4-Bay NAS
|
||||
- description: QNAP TS-x33 NAS devices
|
||||
items:
|
||||
- const: qnap,ts433
|
||||
- enum:
|
||||
- qnap,ts233
|
||||
- qnap,ts433
|
||||
- const: rockchip,rk3568
|
||||
|
||||
- description: Radxa Compute Module 3 (CM3)
|
||||
|
||||
@@ -130,6 +130,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-nanopi-r3s.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-bigtreetech-cb2-manta.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-bigtreetech-pi2.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-tinker-board-3.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-tinker-board-3s.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-9tripod-x3568-v4.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-easepi-r1.dtb
|
||||
@@ -144,6 +146,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-photonicat.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-qnap-ts233.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-qnap-ts433.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-roc-pc.dtb
|
||||
|
||||
@@ -35,7 +35,6 @@
|
||||
function = LED_FUNCTION_POWER;
|
||||
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
label = "rockpis:green:power";
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
|
||||
blue-led {
|
||||
|
||||
@@ -862,6 +862,7 @@
|
||||
clocks = <&cru ACLK_VOP>, <&cru DCLK_VOP>, <&cru HCLK_VOP>;
|
||||
clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
|
||||
iommus = <&vop_mmu>;
|
||||
power-domains = <&power RK3368_PD_VIO>;
|
||||
resets = <&cru SRST_LCDC0_AXI>, <&cru SRST_LCDC0_AHB>, <&cru SRST_LCDC0_DCLK>;
|
||||
reset-names = "axi", "ahb", "dclk";
|
||||
status = "disabled";
|
||||
@@ -896,6 +897,7 @@
|
||||
clock-names = "pclk";
|
||||
phys = <&dphy>;
|
||||
phy-names = "dphy";
|
||||
power-domains = <&power RK3368_PD_VIO>;
|
||||
resets = <&cru SRST_MIPIDSI0>;
|
||||
reset-names = "apb";
|
||||
rockchip,grf = <&grf>;
|
||||
|
||||
@@ -39,8 +39,8 @@
|
||||
led-0 {
|
||||
function = LED_FUNCTION_POWER;
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "on";
|
||||
gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
|
||||
/* USER_LED2 */
|
||||
|
||||
@@ -45,7 +45,6 @@
|
||||
default-state = "on";
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@@ -435,6 +435,11 @@
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-0 = <&i2c2m1_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
13
arch/arm64/boot/dts/rockchip/rk3566-tinker-board-3.dts
Normal file
13
arch/arm64/boot/dts/rockchip/rk3566-tinker-board-3.dts
Normal file
@@ -0,0 +1,13 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
/*
|
||||
* Copyright (C) 2025 Michael Opdenacker <michael.opdenacker@rootcommit.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "rk3566-tinker-board-3.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Asus Tinker Board 3";
|
||||
compatible = "asus,rk3566-tinker-board-3", "rockchip,rk3566";
|
||||
};
|
||||
278
arch/arm64/boot/dts/rockchip/rk3566-tinker-board-3.dtsi
Normal file
278
arch/arm64/boot/dts/rockchip/rk3566-tinker-board-3.dtsi
Normal file
@@ -0,0 +1,278 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
/*
|
||||
* Copyright (C) 2025 Michael Opdenacker <michael.opdenacker@rootcommit.com>
|
||||
*/
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
#include "rk3566.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
i2c0 = &i2c0;
|
||||
i2c2 = &i2c2;
|
||||
mmc1 = &sdmmc0;
|
||||
serial2 = &uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
gpio_leds: gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
act-led {
|
||||
gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger="mmc1";
|
||||
};
|
||||
|
||||
rsv-led {
|
||||
gpios = <&gpio0 RK_PD6 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger="none";
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sys: regulator-3v3-vcc-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: regulator-5v0-vcc-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc5v0_usb_host: regulator-5v0-vcc-usb-host {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&u2_a_vbus_en>;
|
||||
regulator-name = "vcc5v0_usb_host";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
|
||||
assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
|
||||
#clock-cells = <1>;
|
||||
clocks = <&cru I2S1_MCLKOUT_TX>;
|
||||
clock-names = "mclk";
|
||||
clock-output-names = "rk809-clkout1", "rk809-clkout2";
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
|
||||
#sound-dai-cells = <0>;
|
||||
system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulators {
|
||||
vcc_1v8: DCDC_REG5 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG1 {
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sd: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu: regulator@40 {
|
||||
compatible = "silergy,syr827";
|
||||
reg = <0x40>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <830000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "atmel,24c08";
|
||||
reg = <0x50>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&eeprom_wc_n>;
|
||||
};
|
||||
|
||||
rtc_isl1208: rtc@6f {
|
||||
compatible = "isil,isl1208";
|
||||
reg = <0x6f>;
|
||||
interrupt-names = "irq";
|
||||
interrupts-extended = <&gpio0 RK_PD3 IRQ_TYPE_EDGE_FALLING>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rtcic_int_l>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
eeprom {
|
||||
eeprom_wc_n: eeprom-wc-n {
|
||||
rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
rtc {
|
||||
rtcic_int_l: rtcic-int-l {
|
||||
rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
u2_a_vbus_en: u2-a-vbus-en {
|
||||
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
u3_a_vbus_en: u3-a-vbus-en {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||||
vmmc-supply = <&vcc3v3_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_host {
|
||||
phy-supply = <&vcc5v0_usb_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1_host {
|
||||
phy-supply = <&vcc5v0_usb_host>;
|
||||
status = "okay";
|
||||
};
|
||||
30
arch/arm64/boot/dts/rockchip/rk3566-tinker-board-3s.dts
Normal file
30
arch/arm64/boot/dts/rockchip/rk3566-tinker-board-3s.dts
Normal file
@@ -0,0 +1,30 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
/*
|
||||
* Copyright (C) 2025 Michael Opdenacker <michael.opdenacker@rootcommit.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "rk3566-tinker-board-3.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Asus Tinker Board 3S";
|
||||
compatible = "asus,rk3566-tinker-board-3s", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs200-1_8v;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
@@ -170,16 +170,16 @@
|
||||
};
|
||||
|
||||
vcc3v3_pcie: regulator-vcc3v3-pcie {
|
||||
compatible = "regulator-gpio";
|
||||
regulator-name = "vcc3v3_pcie";
|
||||
regulator-min-microvolt = <100000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc3v3_pcie_en_pin>;
|
||||
gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <1>;
|
||||
states = <100000 0>, <3300000 1>;
|
||||
regulator-name = "vcc3v3_pcie";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
startup-delay-us = <5000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: regulator-vcc5v0-sys {
|
||||
|
||||
131
arch/arm64/boot/dts/rockchip/rk3568-qnap-ts233.dts
Normal file
131
arch/arm64/boot/dts/rockchip/rk3568-qnap-ts233.dts
Normal file
@@ -0,0 +1,131 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2021 Rockchip Electronics Co., Ltd.
|
||||
* Copyright (c) 2024 Heiko Stuebner <heiko@sntech.de>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "rk3568-qnap-tsx33.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qnap TS-233-2G NAS System 2-Bay";
|
||||
compatible = "qnap,ts233", "rockchip,rk3568";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac0;
|
||||
};
|
||||
};
|
||||
|
||||
/* connected to sata2 */
|
||||
&combphy2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
|
||||
assigned-clock-rates = <0>, <125000000>;
|
||||
clock_in_out = "output";
|
||||
phy-handle = <&rgmii_phy0>;
|
||||
phy-mode = "rgmii-id";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac0_miim
|
||||
&gmac0_tx_bus2
|
||||
&gmac0_rx_bus2
|
||||
&gmac0_rgmii_clk
|
||||
&gmac0_rgmii_bus>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
/* eeprom for vital-product-data on the backplane */
|
||||
eeprom@56 {
|
||||
compatible = "giantec,gt24c04a", "atmel,24c04";
|
||||
reg = <0x56>;
|
||||
label = "VPD_BP";
|
||||
num-addresses = <2>;
|
||||
pagesize = <16>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
|
||||
&leds {
|
||||
led-1 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_DISK;
|
||||
gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
|
||||
label = "hdd2:green:disk";
|
||||
linux,default-trigger = "disk-activity";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdd2_led_pin>;
|
||||
};
|
||||
};
|
||||
|
||||
&mcu {
|
||||
compatible = "qnap,ts233-mcu";
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
rgmii_phy0: ethernet-phy@3 {
|
||||
/* Motorcomm YT8521 phy */
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0x3>;
|
||||
pinctrl-0 = <ð_phy0_reset_pin>;
|
||||
pinctrl-names = "default";
|
||||
reset-assert-us = <10000>;
|
||||
reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
gmac0 {
|
||||
eth_phy0_reset_pin: eth-phy0-reset-pin {
|
||||
rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
hdd2_led_pin: hdd2-led-pin {
|
||||
rockchip,pins = <1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sata2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* connected to usb_host1_ehci/ohci */
|
||||
&usb2phy1_host {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* connected to usb_host0_ehci/ohci */
|
||||
&usb2phy1_otg {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* right port backside */
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* left port backside */
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -6,10 +6,7 @@
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include "rk3568.dtsi"
|
||||
#include "rk3568-qnap-tsx33.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Qnap TS-433-4G NAS System 4-Bay";
|
||||
@@ -17,83 +14,6 @@
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac0;
|
||||
mmc0 = &sdhci;
|
||||
rtc0 = &rtc_rv8263;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:115200n8";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <©_button_pin>, <&reset_button_pin>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
key-copy {
|
||||
label = "copy";
|
||||
gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_COPY>;
|
||||
};
|
||||
|
||||
key-reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_DISK;
|
||||
gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
|
||||
label = "hdd1:green:disk";
|
||||
linux,default-trigger = "disk-activity";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdd1_led_pin>;
|
||||
};
|
||||
|
||||
led-1 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_DISK;
|
||||
gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
|
||||
label = "hdd2:green:disk";
|
||||
linux,default-trigger = "disk-activity";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdd2_led_pin>;
|
||||
};
|
||||
|
||||
led-2 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_DISK;
|
||||
gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_LOW>;
|
||||
label = "hdd3:green:disk";
|
||||
linux,default-trigger = "disk-activity";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdd3_led_pin>;
|
||||
};
|
||||
|
||||
led-3 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_DISK;
|
||||
gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
|
||||
label = "hdd4:green:disk";
|
||||
linux,default-trigger = "disk-activity";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdd4_led_pin>;
|
||||
};
|
||||
};
|
||||
|
||||
dc_12v: regulator-dc-12v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "dc_12v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie: regulator-vcc3v3-pcie {
|
||||
@@ -105,74 +25,6 @@
|
||||
gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: regulator-vcc3v3-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcc5v0_host: regulator-vcc5v0-host {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
|
||||
vcc5v0_otg: regulator-vcc5v0-otg {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_otg_en>;
|
||||
regulator-name = "vcc5v0_otg";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: regulator-vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcc5v0_usb: regulator-vcc5v0-usb {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
};
|
||||
|
||||
/* connected to usb_host0_xhci */
|
||||
&combphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* connected to sata1 */
|
||||
&combphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* connected to sata2 */
|
||||
@@ -180,22 +32,6 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>, <&cru CLK_MAC0_2TOP>;
|
||||
@@ -212,263 +48,7 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
system-power-controller;
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
wakeup-source;
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-always-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_npu: DCDC_REG4 {
|
||||
regulator-name = "vdd_npu";
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG5 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_image: LDO_REG1 {
|
||||
regulator-name = "vdda0v9_image";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v9: LDO_REG2 {
|
||||
regulator-name = "vdda_0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_pmu: LDO_REG3 {
|
||||
regulator-name = "vdda0v9_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_acodec: LDO_REG4 {
|
||||
regulator-name = "vccio_acodec";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pmu: LDO_REG6 {
|
||||
regulator-name = "vcc3v3_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG7 {
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pmu: LDO_REG8 {
|
||||
regulator-name = "vcca1v8_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_image: LDO_REG9 {
|
||||
regulator-name = "vcca1v8_image";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG1 {
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sd: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_sd";
|
||||
/*
|
||||
* turning this off, breaks access to both
|
||||
* PCIe controllers, refclk generator perhaps
|
||||
*/
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu: regulator@40 {
|
||||
compatible = "silergy,syr827";
|
||||
reg = <0x40>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1390000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
|
||||
rtc_rv8263: rtc@51 {
|
||||
compatible = "microcrystal,rv8263";
|
||||
reg = <0x51>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
/* eeprom for vital-product-data on the mainboard */
|
||||
eeprom@54 {
|
||||
compatible = "giantec,gt24c04a", "atmel,24c04";
|
||||
reg = <0x54>;
|
||||
label = "VPD_MB";
|
||||
num-addresses = <2>;
|
||||
pagesize = <16>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
/* eeprom for vital-product-data on the backplane */
|
||||
eeprom@56 {
|
||||
compatible = "giantec,gt24c04a", "atmel,24c04";
|
||||
@@ -480,6 +60,42 @@
|
||||
};
|
||||
};
|
||||
|
||||
&leds {
|
||||
led-1 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_DISK;
|
||||
gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
|
||||
label = "hdd2:green:disk";
|
||||
linux,default-trigger = "disk-activity";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdd2_led_pin>;
|
||||
};
|
||||
|
||||
led-2 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_DISK;
|
||||
gpios = <&gpio1 RK_PD7 GPIO_ACTIVE_LOW>;
|
||||
label = "hdd3:green:disk";
|
||||
linux,default-trigger = "disk-activity";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdd3_led_pin>;
|
||||
};
|
||||
|
||||
led-3 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_DISK;
|
||||
gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
|
||||
label = "hdd4:green:disk";
|
||||
linux,default-trigger = "disk-activity";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdd4_led_pin>;
|
||||
};
|
||||
};
|
||||
|
||||
&mcu {
|
||||
compatible = "qnap,ts433-mcu";
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
rgmii_phy0: ethernet-phy@3 {
|
||||
/* Motorcomm YT8521 phy */
|
||||
@@ -492,54 +108,6 @@
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* The MCU can provide system temperature too, but only by polling and of
|
||||
* course also cannot set trip points. So attach to the cpu thermal-zone
|
||||
* instead to control the fan.
|
||||
*/
|
||||
&cpu_thermal {
|
||||
trips {
|
||||
case_fan0: case-fan0 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <35000>;
|
||||
type = "active";
|
||||
};
|
||||
|
||||
case_fan1: case-fan1 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <45000>;
|
||||
type = "active";
|
||||
};
|
||||
|
||||
case_fan2: case-fan2 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <65000>;
|
||||
type = "active";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
/*
|
||||
* Always provide some air movement, due to small case
|
||||
* full of harddrives.
|
||||
*/
|
||||
map1 {
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT 1>;
|
||||
trip = <&case_fan0>;
|
||||
};
|
||||
|
||||
map2 {
|
||||
cooling-device = <&fan 2 3>;
|
||||
trip = <&case_fan1>;
|
||||
};
|
||||
|
||||
map3 {
|
||||
cooling-device = <&fan 4 THERMAL_NO_LIMIT>;
|
||||
trip = <&case_fan2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie30phy {
|
||||
data-lanes = <1 2>;
|
||||
status = "okay";
|
||||
@@ -567,21 +135,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
copy_button_pin: copy-button-pin {
|
||||
rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
reset_button_pin: reset-button-pin {
|
||||
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
hdd1_led_pin: hdd1-led-pin {
|
||||
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
hdd2_led_pin: hdd2-led-pin {
|
||||
rockchip,pins = <1 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
@@ -594,90 +148,12 @@
|
||||
rockchip,pins = <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc5v0_otg_en: vcc5v0-otg-en {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
vccio4-supply = <&vcc_1v8>;
|
||||
vccio6-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
max-frequency = <200000000>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
rockchip,hw-tshut-polarity = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* Connected to an MCU, that provides access to more LEDs,
|
||||
* buzzer, fan control and more.
|
||||
*/
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
|
||||
mcu {
|
||||
compatible = "qnap,ts433-mcu";
|
||||
|
||||
fan: fan-0 {
|
||||
#cooling-cells = <2>;
|
||||
cooling-levels = <0 64 89 128 166 204 221 238>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* Pins available on CN3 connector at TTL voltage level (3V3).
|
||||
* ,_ _.
|
||||
* |1234| 1=TX 2=VCC
|
||||
* `----' 3=RX 4=GND
|
||||
*/
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* connected to usb_host0_xhci */
|
||||
&usb2phy0_otg {
|
||||
phy-supply = <&vcc5v0_otg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
@@ -703,12 +179,6 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* front port */
|
||||
&usb_host0_xhci {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* left port backside */
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
|
||||
608
arch/arm64/boot/dts/rockchip/rk3568-qnap-tsx33.dtsi
Normal file
608
arch/arm64/boot/dts/rockchip/rk3568-qnap-tsx33.dtsi
Normal file
@@ -0,0 +1,608 @@
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include "rk3568.dtsi"
|
||||
|
||||
/ {
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
rtc0 = &rtc_rv8263;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:115200n8";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-0 = <©_button_pin>, <&reset_button_pin>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
key-copy {
|
||||
label = "copy";
|
||||
gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_COPY>;
|
||||
};
|
||||
|
||||
key-reset {
|
||||
label = "reset";
|
||||
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
leds: leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led-0 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
function = LED_FUNCTION_DISK;
|
||||
gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
|
||||
label = "hdd1:green:disk";
|
||||
linux,default-trigger = "disk-activity";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdd1_led_pin>;
|
||||
};
|
||||
};
|
||||
|
||||
dc_12v: regulator-dc-12v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "dc_12v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: regulator-vcc3v3-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcc5v0_host: regulator-vcc5v0-host {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
|
||||
vcc5v0_otg: regulator-vcc5v0-otg {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_otg_en>;
|
||||
regulator-name = "vcc5v0_otg";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: regulator-vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcc5v0_usb: regulator-vcc5v0-usb {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
};
|
||||
|
||||
/* connected to usb_host0_xhci */
|
||||
&combphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* connected to sata1 */
|
||||
&combphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
/*
|
||||
* The MCU can provide system temperature too, but only by polling and of
|
||||
* course also cannot set trip points. So attach to the cpu thermal-zone
|
||||
* instead to control the fan.
|
||||
*/
|
||||
&cpu_thermal {
|
||||
trips {
|
||||
case_fan0: case-fan0 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <35000>;
|
||||
type = "active";
|
||||
};
|
||||
|
||||
case_fan1: case-fan1 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <45000>;
|
||||
type = "active";
|
||||
};
|
||||
|
||||
case_fan2: case-fan2 {
|
||||
hysteresis = <2000>;
|
||||
temperature = <65000>;
|
||||
type = "active";
|
||||
};
|
||||
};
|
||||
|
||||
cooling-maps {
|
||||
/*
|
||||
* Always provide some air movement, due to small case
|
||||
* full of harddrives.
|
||||
*/
|
||||
map1 {
|
||||
cooling-device = <&fan THERMAL_NO_LIMIT 1>;
|
||||
trip = <&case_fan0>;
|
||||
};
|
||||
|
||||
map2 {
|
||||
cooling-device = <&fan 2 3>;
|
||||
trip = <&case_fan1>;
|
||||
};
|
||||
|
||||
map3 {
|
||||
cooling-device = <&fan 4 THERMAL_NO_LIMIT>;
|
||||
trip = <&case_fan2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
system-power-controller;
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
wakeup-source;
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-always-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_npu: DCDC_REG4 {
|
||||
regulator-name = "vdd_npu";
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG5 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_image: LDO_REG1 {
|
||||
regulator-name = "vdda0v9_image";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v9: LDO_REG2 {
|
||||
regulator-name = "vdda_0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_pmu: LDO_REG3 {
|
||||
regulator-name = "vdda0v9_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_acodec: LDO_REG4 {
|
||||
regulator-name = "vccio_acodec";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pmu: LDO_REG6 {
|
||||
regulator-name = "vcc3v3_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG7 {
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pmu: LDO_REG8 {
|
||||
regulator-name = "vcca1v8_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_image: LDO_REG9 {
|
||||
regulator-name = "vcca1v8_image";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG1 {
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sd: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_sd";
|
||||
/*
|
||||
* turning this off, breaks access to both
|
||||
* PCIe controllers, refclk generator perhaps
|
||||
*/
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu: regulator@40 {
|
||||
compatible = "silergy,syr827";
|
||||
reg = <0x40>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1390000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
|
||||
rtc_rv8263: rtc@51 {
|
||||
compatible = "microcrystal,rv8263";
|
||||
reg = <0x51>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
/* eeprom for vital-product-data on the mainboard */
|
||||
eeprom@54 {
|
||||
compatible = "giantec,gt24c04a", "atmel,24c04";
|
||||
reg = <0x54>;
|
||||
label = "VPD_MB";
|
||||
num-addresses = <2>;
|
||||
pagesize = <16>;
|
||||
read-only;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
keys {
|
||||
copy_button_pin: copy-button-pin {
|
||||
rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
reset_button_pin: reset-button-pin {
|
||||
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
hdd1_led_pin: hdd1-led-pin {
|
||||
rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc5v0_otg_en: vcc5v0-otg-en {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
vccio4-supply = <&vcc_1v8>;
|
||||
vccio6-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sata1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
max-frequency = <200000000>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
rockchip,hw-tshut-polarity = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/*
|
||||
* Connected to an MCU, that provides access to more LEDs,
|
||||
* buzzer, fan control and more.
|
||||
*/
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
|
||||
mcu: mcu {
|
||||
fan: fan-0 {
|
||||
#cooling-cells = <2>;
|
||||
cooling-levels = <0 64 89 128 166 204 221 238>;
|
||||
};
|
||||
|
||||
nvmem-layout {
|
||||
compatible = "fixed-layout";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
serial-number@0 {
|
||||
reg = <0x0 0x13>;
|
||||
};
|
||||
|
||||
ext-port@22 {
|
||||
reg = <0x22 0x2>;
|
||||
};
|
||||
|
||||
mac0: mac@24 {
|
||||
compatible = "mac-base";
|
||||
reg = <0x24 0x11>;
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
|
||||
mac1: mac@35 {
|
||||
compatible = "mac-base";
|
||||
reg = <0x35 0x11>;
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
|
||||
mac2: mac@46 {
|
||||
compatible = "mac-base";
|
||||
reg = <0x46 0x11>;
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
|
||||
mac3: mac@57 {
|
||||
compatible = "mac-base";
|
||||
reg = <0x57 0x11>;
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
|
||||
mac4: mac@68 {
|
||||
compatible = "mac-base";
|
||||
reg = <0x68 0x11>;
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
|
||||
mac5: mac@79 {
|
||||
compatible = "mac-base";
|
||||
reg = <0x79 0x11>;
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
|
||||
mac6: mac@8a {
|
||||
compatible = "mac-base";
|
||||
reg = <0x8a 0x11>;
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
|
||||
mac7: mac@9b {
|
||||
compatible = "mac-base";
|
||||
reg = <0x9b 0x11>;
|
||||
#nvmem-cell-cells = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* Pins available on CN3 connector at TTL voltage level (3V3).
|
||||
* ,_ _.
|
||||
* |1234| 1=TX 2=VCC
|
||||
* `----' 3=RX 4=GND
|
||||
*/
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* connected to usb_host0_xhci */
|
||||
&usb2phy0_otg {
|
||||
phy-supply = <&vcc5v0_otg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* front port */
|
||||
&usb_host0_xhci {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
@@ -7,6 +7,7 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
@@ -19,6 +20,8 @@
|
||||
aliases {
|
||||
ethernet0 = &gmac0;
|
||||
ethernet1 = &gmac1;
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
};
|
||||
|
||||
chosen {
|
||||
@@ -64,6 +67,61 @@
|
||||
};
|
||||
};
|
||||
|
||||
keys-0 {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 0>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
poll-interval = <100>;
|
||||
|
||||
button-maskrom {
|
||||
label = "MASKROM";
|
||||
linux,code = <KEY_SETUP>;
|
||||
press-threshold-microvolt = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
keys-1 {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 1>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
poll-interval = <100>;
|
||||
|
||||
button-recovery {
|
||||
label = "RECOVERY";
|
||||
linux,code = <KEY_VENDOR>;
|
||||
press-threshold-microvolt = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
keys-2 {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 4>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
poll-interval = <100>;
|
||||
|
||||
button-user2 {
|
||||
label = "USER2";
|
||||
linux,code = <BTN_2>;
|
||||
press-threshold-microvolt = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
keys-3 {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gpio0_a0_d>;
|
||||
|
||||
button-user1 {
|
||||
gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
|
||||
label = "USER1";
|
||||
linux,code = <BTN_1>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_in: regulator-vcc-12v0-dcin {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_in";
|
||||
@@ -597,6 +655,15 @@
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
|
||||
rtc@68 {
|
||||
compatible = "dallas,ds1338";
|
||||
reg = <0x68>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
|
||||
@@ -659,6 +726,12 @@
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
gpio0_a0_d: gpio0-a0-d {
|
||||
rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
headphone {
|
||||
hp_det: hp-det {
|
||||
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
@@ -686,10 +759,14 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcca1v8_pldo2_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
full-pwr-cycle-in-suspend;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
no-sdio;
|
||||
@@ -703,7 +780,6 @@
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
max-frequency = <200000000>;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_3v3_s0>;
|
||||
vqmmc-supply = <&vccio_sd_s0>;
|
||||
@@ -733,6 +809,19 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdp_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_drd0_dwc3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_drd1_dwc3 {
|
||||
dr_mode = "host";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@@ -52,9 +52,9 @@
|
||||
|
||||
power-led {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "on";
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
|
||||
user-led {
|
||||
|
||||
@@ -88,8 +88,8 @@
|
||||
pinctrl-0 = <&led_pins>;
|
||||
|
||||
power-led1 {
|
||||
default-state = "on";
|
||||
gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
|
||||
hdd-led2 {
|
||||
|
||||
@@ -430,7 +430,7 @@
|
||||
clock-output-names = "hym8563";
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-0 = <&hym8563_int>;
|
||||
pinctrl-0 = <&hym8563_int>, <&clk32k_in>;
|
||||
pinctrl-names = "default";
|
||||
wakeup-source;
|
||||
};
|
||||
@@ -483,8 +483,11 @@
|
||||
};
|
||||
|
||||
&pcie2x1l2 {
|
||||
pinctrl-0 = <&rtl8111_perstb>;
|
||||
pinctrl-0 = <&pcie20x1m0_perstn>, <&pcie20x1m0_clkreqn>,
|
||||
<&pcie20x1m0_waken>;
|
||||
pinctrl-names = "default";
|
||||
reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc_3v3_s3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@@ -514,12 +517,6 @@
|
||||
};
|
||||
};
|
||||
|
||||
ethernet-pins {
|
||||
rtl8111_perstb: rtl8111-perstb {
|
||||
rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
hym8563 {
|
||||
|
||||
hym8563_int: hym8563-int {
|
||||
@@ -528,13 +525,6 @@
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins =
|
||||
<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb-typec {
|
||||
usbc0_int: usbc0-int {
|
||||
rockchip,pins =
|
||||
@@ -546,6 +536,18 @@
|
||||
<4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
wifi {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins =
|
||||
<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
wifi_host_wake_irq: wifi-host-wake-irq {
|
||||
rockchip,pins =
|
||||
<0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rknn_core_0 {
|
||||
@@ -596,6 +598,7 @@
|
||||
};
|
||||
|
||||
&sdio {
|
||||
#address-cells = <1>;
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
@@ -607,9 +610,19 @@
|
||||
no-sd;
|
||||
non-removable;
|
||||
sd-uhs-sdr104;
|
||||
#size-cells = <0>;
|
||||
vmmc-supply = <&vcc_3v3_s3>;
|
||||
vqmmc-supply = <&vcc_1v8_s3>;
|
||||
status = "okay";
|
||||
|
||||
sdio_wifi: wifi@1 {
|
||||
reg = <1>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-names = "host-wake";
|
||||
pinctrl-0 = <&wifi_host_wake_irq>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
|
||||
@@ -61,9 +61,9 @@
|
||||
|
||||
power-led {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "on";
|
||||
function = LED_FUNCTION_POWER;
|
||||
gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
Reference in New Issue
Block a user