riscv: dts: spacemit: add 24c02 eeprom on BPI-F3

The BPI-F3 board includes a 24c02 eeprom, that stores the MAC addresses
of the two network interfaces and the board's serial number. These
values are also exposed via an onie,tlv-layout nvmem layout.

The eeprom is marked as read-only since its contents are not supposed to
be modified.

Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Reviewed-by: Vivian Wang <wangruikang@iscas.ac.cn>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Link: https://lore.kernel.org/r/20250926175833.3048516-3-aurelien@aurel32.net
Signed-off-by: Yixun Lan <dlan@gentoo.org>

arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts

@@ -115,6 +115,29 @@
 	pinctrl-0 = <&i2c2_0_cfg>;
 	pinctrl-names = "default";
 	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+		vcc-supply = <&buck3_1v8>; /* EEPROM_VCC1V8 */
+		pagesize = <16>;
+		read-only;
+		size = <256>;
+
+		nvmem-layout {
+			compatible = "onie,tlv-layout";
+
+			mac-address {
+				#nvmem-cell-cells = <1>;
+			};
+
+			num-macs {
+			};
+
+			serial-number {
+			};
+		};
+	};
 };
 
 &i2c8 {
@@ -143,7 +166,7 @@
 				regulator-always-on;
 			};
 
-			buck3 {
+			buck3_1v8: buck3 {
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-ramp-delay = <5000>;