mirror of
https://github.com/torvalds/linux.git
synced 2025-12-07 20:06:24 +00:00
arm64: dts: qcom: Add support for Huawei MateBook E 2019
Add device tree for Huawei MateBook E 2019, which is a 2-in-1 tablet based on Qualcomm's sdm850 platform. Supported features: - ADSP, CDSP and SLPI - Volume Key - Power Key - Tablet Mode Switching - Display - Touchscreen - Stylus - WiFi [1] - Bluetooth [2] - GPU - USB - Keyboard - Touchpad - UFS - SD Card - Audio (right internal mic and headphone mic not working) - Mobile Network [1] WiFi probing log: ath10k_snoc 18800000.wifi: Adding to iommu group 12 ath10k_snoc 18800000.wifi: qmi chip_id 0x30214 chip_family 0x4001 board_id 0xff soc_id 0x40030001 ath10k_snoc 18800000.wifi: qmi fw_version 0x2009856b fw_build_timestamp 2018-07-19 12:28 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.2.0-01387-QCAHLSWMTPLZ-1 ath10k_snoc 18800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000 ath10k_snoc 18800000.wifi: kconfig debug 1 debugfs 1 tracing 1 dfs 0 testmode 0 ath10k_snoc 18800000.wifi: firmware ver api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790 ath10k_snoc 18800000.wifi: htt-ver 3.53 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1 ath10k_snoc 18800000.wifi: invalid MAC address; choosing random [2] Bluetooth probing log: Bluetooth: hci0: setting up wcn399x Bluetooth: hci0: QCA Product ID :0x0000000a Bluetooth: hci0: QCA SOC Version :0x40010214 Bluetooth: hci0: QCA ROM Version :0x00000201 Bluetooth: hci0: QCA Patch Version:0x00000001 Bluetooth: hci0: QCA controller version 0x02140201 Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv Bluetooth: hci0: QCA Downloading qca/crnv21.bin Bluetooth: hci0: QCA setup on UART is completed Features not supported yet: - Panel Backlight - Lid Detection - Battery - EFI Variable Access - Cameras 1. Panel backlight, lid detection and battery will be supported with the EC driver upstreamed. 2. EFI variables can only be read with the QSEECOM driver, and will be enabled when the driver is fixed. 3. Cameras are tested to work with modified downstream driver, and once drivers for these camera modules are included in the tree, cameras can be enabled. Features won't be supported: - External Display - Fingerprint 1. To make external display work, more reverse engineering may be required, but it's beyond my ability. 2. Fingerprint is controlled by TrustZone, meaning direct access to it isn't possible. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Signed-off-by: Jingzhou Zhu <newwheatzjz@zohomail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20251008130052.11427-3-newwheatzjz@zohomail.com Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
Jingzhou Zhu
committed by
Bjorn Andersson
Bjorn Andersson
parent
bfc5cabaa4
commit
aab69794b5
@@ -261,6 +261,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium-ebbg.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium-tianma.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-polaris.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sdm845-shift-axolotl.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sdm850-huawei-matebook-e-2019.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sdx75-idp.dtb
|
||||
|
||||
972
arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts
Normal file
972
arch/arm64/boot/dts/qcom/sdm850-huawei-matebook-e-2019.dts
Normal file
@@ -0,0 +1,972 @@
|
||||
// SPDX-License-Identifier: BSD-3-Clause
|
||||
/*
|
||||
* Huawei MateBook E 2019
|
||||
*
|
||||
* Copyright (c) 2025, Jingzhou Zhu <newwheatzjz@zohomail.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/input/gpio-keys.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
||||
#include <dt-bindings/sound/qcom,q6afe.h>
|
||||
#include <dt-bindings/sound/qcom,q6asm.h>
|
||||
#include <dt-bindings/sound/qcom,wcd934x.h>
|
||||
#include "sdm850.dtsi"
|
||||
#include "sdm845-wcd9340.dtsi"
|
||||
#include "pm8998.dtsi"
|
||||
|
||||
/*
|
||||
* Update following upstream (sdm845.dtsi) reserved
|
||||
* memory mappings for firmware loading to succeed
|
||||
* and enable the IPA device.
|
||||
*/
|
||||
/delete-node/ &tz_mem;
|
||||
/delete-node/ &rmtfs_mem;
|
||||
/delete-node/ &qseecom_mem;
|
||||
/delete-node/ &ipa_fw_mem;
|
||||
/delete-node/ &ipa_gsi_mem;
|
||||
/delete-node/ &gpu_mem;
|
||||
/delete-node/ &adsp_mem;
|
||||
/delete-node/ &wlan_msa_mem;
|
||||
/delete-node/ &slpi_mem;
|
||||
|
||||
/ {
|
||||
model = "Huawei MateBook E 2019";
|
||||
compatible = "huawei,planck", "qcom,sdm845";
|
||||
chassis-type = "convertible";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart9;
|
||||
serial1 = &uart6;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
pinctrl-0 = <&volume_up_gpio &mode_pin_active>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
key-vol-up {
|
||||
label = "Volume up";
|
||||
gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
debounce-interval = <15>;
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
switch-mode {
|
||||
label = "Tablet mode switch";
|
||||
gpios = <&tlmm 79 GPIO_ACTIVE_HIGH>;
|
||||
linux,input-type = <EV_SW>;
|
||||
linux,code = <SW_TABLET_MODE>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
pinctrl-0 = <&cam_indicator_en>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
led: led-camera-indicator {
|
||||
label = "white:camera-indicator";
|
||||
function = LED_FUNCTION_INDICATOR;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "none";
|
||||
default-state = "off";
|
||||
/* Reuse as a panic indicator until we get a "camera on" trigger */
|
||||
panic-indicator;
|
||||
};
|
||||
};
|
||||
|
||||
sw_edp_1p2: regulator-edp-1p2 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "sw_edp_1p2";
|
||||
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
|
||||
pinctrl-0 = <&sw_edp_1p2_en>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
gpio = <&pm8998_gpios 9 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
vin-supply = <&vreg_l2a_1p2>;
|
||||
};
|
||||
|
||||
vlcm_3v3: regulator-vlcm-3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vlcm_3v3";
|
||||
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&tlmm 88 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
|
||||
vin-supply = <&vph_pwr>;
|
||||
};
|
||||
|
||||
vph_pwr: regulator-vph-pwr {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vph_pwr";
|
||||
|
||||
regulator-min-microvolt = <3700000>;
|
||||
regulator-max-microvolt = <3700000>;
|
||||
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
cont_splash_mem: framebuffer@80100000 {
|
||||
reg = <0 0x80100000 0 0xd00000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
tz_mem: tz@86d00000 {
|
||||
reg = <0 0x86d00000 0 0x4600000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
qseecom_mem: qseecom@8b500000 {
|
||||
reg = <0 0x8b500000 0 0xa00000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
wlan_msa_mem: wlan-msa@8c400000 {
|
||||
reg = <0 0x8c400000 0 0x100000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
adsp_mem: adsp@8c500000 {
|
||||
reg = <0 0x8c500000 0 0x1a00000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
ipa_fw_mem: ipa-fw@8df00000 {
|
||||
reg = <0 0x8df00000 0 0x100000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
slpi_mem: slpi@96700000 {
|
||||
reg = <0 0x96700000 0 0x1200000>;
|
||||
};
|
||||
|
||||
gpu_mem: gpu@97900000 {
|
||||
reg = <0 0x97900000 0 0x5000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
rmtfs_mem: rmtfs@97c00000 {
|
||||
compatible = "qcom,rmtfs-mem";
|
||||
reg = <0 0x97c00000 0 0x200000>;
|
||||
no-map;
|
||||
|
||||
qcom,client-id = <1>;
|
||||
qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>;
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
sn65dsi86_refclk: sn65dsi86-refclk {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
|
||||
clock-frequency = <19200000>;
|
||||
};
|
||||
};
|
||||
|
||||
&adsp_pas {
|
||||
firmware-name = "qcom/sdm850/HUAWEI/AL09/qcadsp850.mbn";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&apps_rsc {
|
||||
regulators-0 {
|
||||
compatible = "qcom,pm8998-rpmh-regulators";
|
||||
qcom,pmic-id = "a";
|
||||
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
vdd-s2-supply = <&vph_pwr>;
|
||||
vdd-s3-supply = <&vph_pwr>;
|
||||
vdd-s4-supply = <&vph_pwr>;
|
||||
vdd-s5-supply = <&vph_pwr>;
|
||||
vdd-s6-supply = <&vph_pwr>;
|
||||
vdd-s7-supply = <&vph_pwr>;
|
||||
vdd-s8-supply = <&vph_pwr>;
|
||||
vdd-s9-supply = <&vph_pwr>;
|
||||
vdd-s10-supply = <&vph_pwr>;
|
||||
vdd-s11-supply = <&vph_pwr>;
|
||||
vdd-s12-supply = <&vph_pwr>;
|
||||
vdd-s13-supply = <&vph_pwr>;
|
||||
vdd-l1-l27-supply = <&vreg_s7a_1p025>;
|
||||
vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
|
||||
vdd-l3-l11-supply = <&vreg_s7a_1p025>;
|
||||
vdd-l4-l5-supply = <&vreg_s7a_1p025>;
|
||||
vdd-l6-supply = <&vph_pwr>;
|
||||
vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
|
||||
vdd-l26-supply = <&vreg_s3a_1p35>;
|
||||
vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
|
||||
|
||||
vreg_s2a_1p125: smps2 {
|
||||
};
|
||||
|
||||
vreg_s3a_1p35: smps3 {
|
||||
regulator-min-microvolt = <1352000>;
|
||||
regulator-max-microvolt = <1352000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_s4a_1p8: smps4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_s5a_2p04: smps5 {
|
||||
regulator-min-microvolt = <2040000>;
|
||||
regulator-max-microvolt = <2040000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_s6a_0p8: smps6 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_s7a_1p025: smps7 {
|
||||
regulator-min-microvolt = <1028000>;
|
||||
regulator-max-microvolt = <1028000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vdd_qusb_hs0:
|
||||
vdda_hp_pcie_core:
|
||||
vdda_mipi_csi0_0p9:
|
||||
vdda_mipi_csi1_0p9:
|
||||
vdda_mipi_csi2_0p9:
|
||||
vdda_mipi_dsi0_pll:
|
||||
vdda_mipi_dsi1_pll:
|
||||
vdda_qlink_lv:
|
||||
vdda_qlink_lv_ck:
|
||||
vdda_qrefs_0p875:
|
||||
vdda_pcie_core:
|
||||
vdda_pll_cc_ebi01:
|
||||
vdda_pll_cc_ebi23:
|
||||
vdda_sp_sensor:
|
||||
vdda_ufs1_core:
|
||||
vdda_ufs2_core:
|
||||
vdda_usb1_ss_core:
|
||||
vdda_usb2_ss_core:
|
||||
vreg_l1a_0p875: ldo1 {
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <880000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vddpx_10:
|
||||
vreg_l2a_1p2: ldo2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vreg_l3a_1p0: ldo3 {
|
||||
};
|
||||
|
||||
vdd_wcss_cx:
|
||||
vdd_wcss_mx:
|
||||
vdda_wcss_pll:
|
||||
vreg_l5a_0p8: ldo5 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vddpx_13:
|
||||
vreg_l6a_1p8: ldo6 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l7a_1p8: ldo7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l8a_1p2: ldo8 {
|
||||
};
|
||||
|
||||
vreg_l9a_1p8: ldo9 {
|
||||
};
|
||||
|
||||
vreg_l10a_1p8: ldo10 {
|
||||
};
|
||||
|
||||
vreg_l11a_1p0: ldo11 {
|
||||
};
|
||||
|
||||
vdd_qfprom:
|
||||
vdd_qfprom_sp:
|
||||
vdda_apc1_cs_1p8:
|
||||
vdda_gfx_cs_1p8:
|
||||
vdda_qrefs_1p8:
|
||||
vdda_qusb_hs0_1p8:
|
||||
vddpx_11:
|
||||
vreg_l12a_1p8: ldo12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vddpx_2:
|
||||
vreg_l13a_2p95: ldo13 {
|
||||
regulator-min-microvolt = <2960000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l14a_1p88: ldo14 {
|
||||
regulator-min-microvolt = <1880000>;
|
||||
regulator-max-microvolt = <1880000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vreg_l15a_1p8: ldo15 {
|
||||
};
|
||||
|
||||
vreg_l16a_2p7: ldo16 {
|
||||
};
|
||||
|
||||
vreg_l17a_1p3: ldo17 {
|
||||
regulator-min-microvolt = <1304000>;
|
||||
regulator-max-microvolt = <1304000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l18a_2p7: ldo18 {
|
||||
};
|
||||
|
||||
vreg_l19a_3p0: ldo19 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l20a_2p95: ldo20 {
|
||||
regulator-min-microvolt = <2960000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l21a_2p95: ldo21 {
|
||||
regulator-min-microvolt = <2960000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l22a_2p85: ldo22 {
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vreg_l23a_3p3: ldo23 {
|
||||
};
|
||||
|
||||
vdda_qusb_hs0_3p1:
|
||||
vreg_l24a_3p075: ldo24 {
|
||||
/* 3075000 uV causes -ENOTRECOVERABLE error */
|
||||
regulator-min-microvolt = <3088000>;
|
||||
regulator-max-microvolt = <3088000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l25a_3p3: ldo25 {
|
||||
regulator-min-microvolt = <3104000>;
|
||||
regulator-max-microvolt = <3104000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vdda_hp_pcie_1p2:
|
||||
vdda_hv_ebi0:
|
||||
vdda_hv_ebi1:
|
||||
vdda_hv_ebi2:
|
||||
vdda_hv_ebi3:
|
||||
vdda_mipi_csi_1p25:
|
||||
vdda_mipi_dsi0_1p2:
|
||||
vdda_mipi_dsi1_1p2:
|
||||
vdda_pcie_1p2:
|
||||
vdda_ufs1_1p2:
|
||||
vdda_ufs2_1p2:
|
||||
vdda_usb1_ss_1p2:
|
||||
vdda_usb2_ss_1p2:
|
||||
vreg_l26a_1p2: ldo26 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l28a_3p0: ldo28 {
|
||||
/* 3300000 uV causes -ENOTRECOVERABLE error */
|
||||
regulator-min-microvolt = <2856000>;
|
||||
regulator-max-microvolt = <3008000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_lvs1a_1p8: lvs1 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vreg_lvs2a_1p8: lvs2 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
regulators-1 {
|
||||
compatible = "qcom,pm8005-rpmh-regulators";
|
||||
qcom,pmic-id = "c";
|
||||
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
vdd-s2-supply = <&vph_pwr>;
|
||||
vdd-s3-supply = <&vph_pwr>;
|
||||
vdd-s4-supply = <&vph_pwr>;
|
||||
|
||||
vreg_s2c_0p752: smps2 {
|
||||
regulator-min-microvolt = <752000>;
|
||||
regulator-max-microvolt = <752000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&cci_i2c0 {
|
||||
/* chipnext,cn3927e vcm@0xc */
|
||||
/* samsung,s5k3l6 camera@0x10 */
|
||||
/* eeprom@0x50 */
|
||||
};
|
||||
|
||||
&cci_i2c1 {
|
||||
/* galaxycore,gc5025 camera@0x36 */
|
||||
/* eeprom@0x50 */
|
||||
};
|
||||
|
||||
&cdsp_pas {
|
||||
firmware-name = "qcom/sdm850/HUAWEI/AL09/qccdsp850.mbn";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&crypto {
|
||||
/* FIXME: qce_start triggers an SError */
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&gcc {
|
||||
protected-clocks = <GCC_QSPI_CORE_CLK>,
|
||||
<GCC_QSPI_CORE_CLK_SRC>,
|
||||
<GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
|
||||
<GCC_LPASS_Q6_AXI_CLK>,
|
||||
<GCC_LPASS_SWAY_CLK>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
status = "okay";
|
||||
|
||||
zap-shader {
|
||||
memory-region = <&gpu_mem>;
|
||||
firmware-name = "qcom/sdm850/HUAWEI/AL09/qcdxkmsuc850.mbn";
|
||||
};
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
clock-frequency = <400000>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
touchscreen: hid@5d {
|
||||
compatible = "hid-over-i2c";
|
||||
reg = <0x5d>;
|
||||
hid-descr-addr = <0x1>;
|
||||
|
||||
interrupts-extended = <&tlmm 125 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
pinctrl-0 = <&i2c5_hid_active>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
/* ec@0x76 */
|
||||
};
|
||||
|
||||
&i2c10 {
|
||||
clock-frequency = <400000>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
sn65dsi86: bridge@2c {
|
||||
compatible = "ti,sn65dsi86";
|
||||
reg = <0x2c>;
|
||||
|
||||
pinctrl-0 = <&sn65dsi86_pin_active>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
enable-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
vcca-supply = <&sw_edp_1p2>;
|
||||
vcc-supply = <&sw_edp_1p2>;
|
||||
vpll-supply = <&vreg_l14a_1p88>;
|
||||
vccio-supply = <&vreg_l14a_1p88>;
|
||||
|
||||
clocks = <&sn65dsi86_refclk>;
|
||||
clock-names = "refclk";
|
||||
|
||||
no-hpd;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
sn65dsi86_in: endpoint {
|
||||
remote-endpoint = <&mdss_dsi0_out>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
sn65dsi86_out: endpoint {
|
||||
remote-endpoint = <&panel_in_edp>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
aux-bus {
|
||||
panel: panel {
|
||||
compatible = "innolux,p120zdg-bf1";
|
||||
power-supply = <&vlcm_3v3>;
|
||||
|
||||
port {
|
||||
panel_in_edp: endpoint {
|
||||
remote-endpoint = <&sn65dsi86_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ipa {
|
||||
qcom,gsi-loader = "self";
|
||||
memory-region = <&ipa_fw_mem>;
|
||||
firmware-name = "qcom/sdm850/HUAWEI/AL09/ipa_fws.elf";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdss {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdss_dsi0 {
|
||||
vdda-supply = <&vdda_mipi_dsi0_1p2>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdss_dsi0_out {
|
||||
remote-endpoint = <&sn65dsi86_in>;
|
||||
data-lanes = <0 1 2 3>;
|
||||
};
|
||||
|
||||
&mdss_dsi0_phy {
|
||||
vdds-supply = <&vdda_mipi_dsi0_pll>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mss_pil {
|
||||
firmware-name = "qcom/sdm850/HUAWEI/AL09/qcdsp1v2850.mbn",
|
||||
"qcom/sdm850/HUAWEI/AL09/qcdsp2850.mbn";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm8998_gpios {
|
||||
sw_edp_1p2_en: sw-edp-1p2-en-state {
|
||||
pins = "gpio9";
|
||||
function = "normal";
|
||||
bias-disable;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||||
};
|
||||
|
||||
volume_up_gpio: volume-up-gpio-state {
|
||||
pins = "gpio6";
|
||||
function = "normal";
|
||||
input-enable;
|
||||
bias-pull-up;
|
||||
qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
|
||||
};
|
||||
};
|
||||
|
||||
&pm8998_pwrkey {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pm8998_resin {
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_id_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_id_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&q6asmdai {
|
||||
dai@0 {
|
||||
reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
|
||||
};
|
||||
|
||||
dai@1 {
|
||||
reg = <MSM_FRONTEND_DAI_MULTIMEDIA2>;
|
||||
};
|
||||
|
||||
dai@2 {
|
||||
reg = <MSM_FRONTEND_DAI_MULTIMEDIA3>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdhc_2 {
|
||||
pinctrl-0 = <&sdc2_default_state &sdc2_card_det_n>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
vmmc-supply = <&vreg_l21a_2p95>;
|
||||
vqmmc-supply = <&vddpx_2>;
|
||||
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&slpi_pas {
|
||||
firmware-name = "qcom/sdm850/HUAWEI/AL09/qcslpi850.mbn";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sound {
|
||||
compatible = "lenovo,yoga-c630-sndcard", "qcom,sdm845-sndcard";
|
||||
model = "HUAWEI-PAK_AL09-M1040";
|
||||
|
||||
audio-routing = "RX_BIAS", "MCLK",
|
||||
"AMIC2", "MIC BIAS2",
|
||||
"DMIC0", "MCLK",
|
||||
"DMIC0", "MIC BIAS1",
|
||||
"DMIC2", "MCLK",
|
||||
"DMIC2", "MIC BIAS3",
|
||||
"SpkrLeft IN", "SPK1 OUT",
|
||||
"SpkrRight IN", "SPK2 OUT";
|
||||
|
||||
mm1-dai-link {
|
||||
link-name = "MultiMedia1";
|
||||
|
||||
cpu {
|
||||
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
|
||||
};
|
||||
};
|
||||
|
||||
mm2-dai-link {
|
||||
link-name = "MultiMedia2";
|
||||
|
||||
cpu {
|
||||
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
|
||||
};
|
||||
};
|
||||
|
||||
mm3-dai-link {
|
||||
link-name = "MultiMedia3";
|
||||
|
||||
cpu {
|
||||
sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
|
||||
};
|
||||
};
|
||||
|
||||
slim-dai-link {
|
||||
link-name = "SLIM Playback";
|
||||
|
||||
codec {
|
||||
sound-dai = <&left_spkr>, <&right_spkr>, <&swm 0>, <&wcd9340 AIF1_PB>;
|
||||
};
|
||||
|
||||
cpu {
|
||||
sound-dai = <&q6afedai SLIMBUS_0_RX>;
|
||||
};
|
||||
|
||||
platform {
|
||||
sound-dai = <&q6routing>;
|
||||
};
|
||||
};
|
||||
|
||||
slimcap-dai-link {
|
||||
link-name = "SLIM Capture";
|
||||
|
||||
codec {
|
||||
sound-dai = <&wcd9340 AIF1_CAP>;
|
||||
};
|
||||
|
||||
cpu {
|
||||
sound-dai = <&q6afedai SLIMBUS_0_TX>;
|
||||
};
|
||||
|
||||
platform {
|
||||
sound-dai = <&q6routing>;
|
||||
};
|
||||
};
|
||||
|
||||
slim-wcd-dai-link {
|
||||
link-name = "SLIM WCD Playback";
|
||||
|
||||
codec {
|
||||
sound-dai = <&wcd9340 AIF2_PB>;
|
||||
};
|
||||
|
||||
cpu {
|
||||
sound-dai = <&q6afedai SLIMBUS_1_RX>;
|
||||
};
|
||||
|
||||
platform {
|
||||
sound-dai = <&q6routing>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <0 4>, /* Unused */
|
||||
<81 4>; /* SPI (fingerprint reader) */
|
||||
|
||||
cam_indicator_en: cam-indicator-en-state {
|
||||
pins = "gpio12";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
i2c5_hid_active: i2c5-hid-active-state {
|
||||
pins = "gpio125";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mode_pin_active: mode-pin-state {
|
||||
pins = "gpio79";
|
||||
function = "gpio";
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
sdc2_default_state: sdc2-default-state {
|
||||
clk-pins {
|
||||
pins = "sdc2_clk";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
cmd-pins {
|
||||
pins = "sdc2_cmd";
|
||||
drive-strength = <16>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
data-pins {
|
||||
pins = "sdc2_data";
|
||||
drive-strength = <16>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
sdc2_card_det_n: sd-card-det-n-state {
|
||||
pins = "gpio126";
|
||||
function = "gpio";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
sn65dsi86_pin_active: sn65dsi86-enable-state {
|
||||
pins = "gpio96";
|
||||
function = "gpio";
|
||||
drive-strength = <2>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
&uart6 {
|
||||
pinctrl-0 = <&qup_uart6_4pin>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "qcom,wcn3990-bt";
|
||||
|
||||
vddio-supply = <&vreg_s4a_1p8>;
|
||||
vddxo-supply = <&vreg_l7a_1p8>;
|
||||
vddrf-supply = <&vreg_l17a_1p3>;
|
||||
vddch0-supply = <&vreg_l25a_3p3>;
|
||||
vddch1-supply = <&vreg_l23a_3p3>;
|
||||
max-speed = <3200000>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart9 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ufs_mem_hc {
|
||||
reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
|
||||
|
||||
vcc-supply = <&vreg_l20a_2p95>;
|
||||
vcc-max-microamp = <600000>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ufs_mem_phy {
|
||||
vdda-phy-supply = <&vdda_ufs1_core>;
|
||||
vdda-pll-supply = <&vdda_ufs1_1p2>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_dwc3 {
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&usb_1_hsphy {
|
||||
vdd-supply = <&vdda_usb1_ss_core>;
|
||||
vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
|
||||
vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
|
||||
|
||||
qcom,imp-res-offset-value = <8>;
|
||||
qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
|
||||
qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
|
||||
qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_qmpphy {
|
||||
vdda-phy-supply = <&vdda_usb1_ss_1p2>;
|
||||
vdda-pll-supply = <&vdda_usb1_ss_core>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_2_dwc3 {
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&usb_2_hsphy {
|
||||
vdd-supply = <&vdda_usb2_ss_core>;
|
||||
vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
|
||||
vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
|
||||
|
||||
qcom,imp-res-offset-value = <8>;
|
||||
qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_2_qmpphy {
|
||||
vdda-phy-supply = <&vdda_usb2_ss_1p2>;
|
||||
vdda-pll-supply = <&vdda_usb2_ss_core>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&venus {
|
||||
firmware-name = "qcom/sdm850/HUAWEI/AL09/qcvss850.mbn";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wcd9340 {
|
||||
reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>;
|
||||
vdd-buck-supply = <&vreg_s4a_1p8>;
|
||||
vdd-buck-sido-supply = <&vreg_s4a_1p8>;
|
||||
vdd-tx-supply = <&vreg_s4a_1p8>;
|
||||
vdd-rx-supply = <&vreg_s4a_1p8>;
|
||||
vdd-io-supply = <&vreg_s4a_1p8>;
|
||||
qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000
|
||||
500000 500000 500000 500000>;
|
||||
qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
|
||||
qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
|
||||
qcom,micbias1-microvolt = <1800000>;
|
||||
qcom,micbias2-microvolt = <2700000>;
|
||||
qcom,micbias3-microvolt = <1800000>;
|
||||
|
||||
swm: soundwire@c85 {
|
||||
left_spkr: speaker@0,3 {
|
||||
compatible = "sdw10217211000";
|
||||
reg = <0 3>;
|
||||
powerdown-gpios = <&wcdgpio 1 GPIO_ACTIVE_LOW>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
sound-name-prefix = "SpkrLeft";
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
right_spkr: speaker@0,4 {
|
||||
compatible = "sdw10217211000";
|
||||
reg = <0 4>;
|
||||
powerdown-gpios = <&wcdgpio 2 GPIO_ACTIVE_LOW>;
|
||||
#thermal-sensor-cells = <0>;
|
||||
sound-name-prefix = "SpkrRight";
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&wifi {
|
||||
vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
|
||||
vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
|
||||
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
|
||||
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
|
||||
vdd-3.3-ch1-supply = <&vreg_l23a_3p3>;
|
||||
|
||||
qcom,snoc-host-cap-8bit-quirk;
|
||||
qcom,calibration-variant = "Huawei_Planck";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
Reference in New Issue
Block a user