mirror of
https://github.com/torvalds/linux.git
synced 2025-12-07 20:06:24 +00:00
riscv: dts: starfive: add Orange Pi RV
Orange Pi RV is a SBC based on the StarFive VisionFive 2 board. Orange Pi RV features: - StarFive JH7110 SoC - GbE port connected to JH7110 GMAC0 via YT8531 PHY - 4x USB ports via VL805 PCIe USB controller connected to JH7110 pcie0 - M.2 M-key slot connected to JH7110 pcie1 - HDMI video output - 3.5mm audio output - Ampak AP6256 SDIO Wi-Fi/Bluetooth module on mmc0 - microSD slot on mmc1 - SPI NOR flash memory - 24c02 EEPROM (read only by default) Signed-off-by: Icenowy Zheng <uwu@icenowy.me> Signed-off-by: E Shattow <e@freeshell.de> [conor: amend comment to say what's missing] Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
This commit is contained in:
committed by
Conor Dooley
parent
d94ebab404
commit
5b70764e10
@@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-deepcomputing-fml13v01.dtb
|
||||
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-mars.dtb
|
||||
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-marscm-emmc.dtb
|
||||
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-marscm-lite.dtb
|
||||
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-orangepi-rv.dtb
|
||||
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-pine64-star64.dtb
|
||||
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-lite.dtb
|
||||
dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-lite-emmc.dtb
|
||||
|
||||
76
arch/riscv/boot/dts/starfive/jh7110-orangepi-rv.dts
Normal file
76
arch/riscv/boot/dts/starfive/jh7110-orangepi-rv.dts
Normal file
@@ -0,0 +1,76 @@
|
||||
// SPDX-License-Identifier: GPL-2.0 OR MIT
|
||||
/*
|
||||
* Copyright (C) 2025 Icenowy Zheng <uwu@icenowy.me>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "jh7110-common.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Xunlong Orange Pi RV";
|
||||
compatible = "xunlong,orangepi-rv", "starfive,jh7110";
|
||||
|
||||
/* This regulator is always on by hardware */
|
||||
reg_vcc3v3_pcie: regulator-vcc3v3-pcie {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3-pcie";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
wifi_pwrseq: wifi-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
reset-gpios = <&sysgpio 62 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>;
|
||||
assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>;
|
||||
starfive,tx-use-rgmii-clk;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
cap-sd-highspeed;
|
||||
mmc-pwrseq = <&wifi_pwrseq>;
|
||||
vmmc-supply = <®_vcc3v3_pcie>;
|
||||
vqmmc-supply = <&vcc_3v3>;
|
||||
status = "okay";
|
||||
|
||||
ap6256: wifi@1 {
|
||||
compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac";
|
||||
reg = <1>;
|
||||
/* TODO: out-of-band IRQ on GPIO21, lacking pinctrl support */
|
||||
};
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
cd-gpios = <&sysgpio 41 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&phy0 {
|
||||
rx-internal-delay-ps = <1500>;
|
||||
tx-internal-delay-ps = <1500>;
|
||||
motorcomm,rx-clk-drv-microamp = <3970>;
|
||||
motorcomm,rx-data-drv-microamp = <2910>;
|
||||
motorcomm,tx-clk-adj-enabled;
|
||||
motorcomm,tx-clk-10-inverted;
|
||||
motorcomm,tx-clk-100-inverted;
|
||||
motorcomm,tx-clk-1000-inverted;
|
||||
};
|
||||
|
||||
&pwmdac {
|
||||
status = "okay";
|
||||
};
|
||||
Reference in New Issue
Block a user