net: stmmac: ingenic: use ->set_phy_intf_sel()

Rather than placing the phy_intf_sel() setup in the ->init() method,
move it to the new ->set_phy_intf_sel() method.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vHHqY-0000000Djrn-1D6H@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit is contained in:
Russell King (Oracle)
2025-11-07 08:29:26 +00:00
committed by Jakub Kicinski
parent 9352f74fd1
commit 34bf68a691

View File

@@ -134,32 +134,21 @@ static int x2000_mac_set_mode(struct ingenic_mac *mac, u8 phy_intf_sel)
return regmap_update_bits(mac->regmap, 0, mac->soc_info->mask, val);
}
static int ingenic_mac_init(struct platform_device *pdev, void *bsp_priv)
static int ingenic_set_phy_intf_sel(void *bsp_priv, u8 phy_intf_sel)
{
struct ingenic_mac *mac = bsp_priv;
phy_interface_t interface;
int phy_intf_sel, ret;
if (mac->soc_info->set_mode) {
interface = mac->plat_dat->phy_interface;
if (!mac->soc_info->set_mode)
return 0;
phy_intf_sel = stmmac_get_phy_intf_sel(interface);
if (phy_intf_sel < 0 || phy_intf_sel >= BITS_PER_BYTE ||
~mac->soc_info->valid_phy_intf_sel & BIT(phy_intf_sel)) {
dev_err(mac->dev, "unsupported interface %s\n",
phy_modes(interface));
return phy_intf_sel < 0 ? phy_intf_sel : -EINVAL;
}
if (phy_intf_sel >= BITS_PER_BYTE ||
~mac->soc_info->valid_phy_intf_sel & BIT(phy_intf_sel))
return -EINVAL;
dev_dbg(mac->dev, "MAC PHY control register: interface %s\n",
phy_modes(interface));
dev_dbg(mac->dev, "MAC PHY control register: interface %s\n",
phy_modes(mac->plat_dat->phy_interface));
ret = mac->soc_info->set_mode(mac, phy_intf_sel);
if (ret)
return ret;
}
return 0;
return mac->soc_info->set_mode(mac, phy_intf_sel);
}
static int ingenic_mac_probe(struct platform_device *pdev)
@@ -221,7 +210,7 @@ static int ingenic_mac_probe(struct platform_device *pdev)
mac->plat_dat = plat_dat;
plat_dat->bsp_priv = mac;
plat_dat->init = ingenic_mac_init;
plat_dat->set_phy_intf_sel = ingenic_set_phy_intf_sel;
return devm_stmmac_pltfr_probe(pdev, plat_dat, &stmmac_res);
}