mirror of
https://github.com/torvalds/linux.git
synced 2025-12-07 20:06:24 +00:00
The same suspend and resume callbacks are used for both suspend-to-RAM/idle and hibernation. These callbacks invoke pm_suspend_via_firmware() and pm_resume_via_firmware(), respectively. In the .freeze() of hibernation, pm_suspend_via_firmware() returns false, causing the driver to put ISH into D0i3. However, during the .thaw(), pm_resume_via_firmware() returns true, leading the driver to treat ISH as resuming from D3 instead of D0i3. The asymmetric behavior between .freeze() and .thaw() during hibernation can cause the client connection states on the firmware side and the driver side to become inconsistent. To address the inconsistent client connection states issue, separate hibernate-related callbacks (freeze, thaw) in dev_pm_ops. Since ISH does not need to save any firmware-related state when entering hibernation, it is sufficient to call pci_save_state() in .freeze() to prevent the PCI bus from changing the ISH power state. No actions are required in .thaw(). Signed-off-by: Zhang Lixu <lixu.zhang@intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.com>
481 lines
12 KiB
C
481 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* PCI glue for ISHTP provider device (ISH) driver
|
|
*
|
|
* Copyright (c) 2014-2016, Intel Corporation.
|
|
*/
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/device.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/types.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/suspend.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/workqueue.h>
|
|
#define CREATE_TRACE_POINTS
|
|
#include <trace/events/intel_ish.h>
|
|
#include "ishtp-dev.h"
|
|
#include "hw-ish.h"
|
|
|
|
enum ishtp_driver_data_index {
|
|
ISHTP_DRIVER_DATA_NONE,
|
|
ISHTP_DRIVER_DATA_LNL_M,
|
|
ISHTP_DRIVER_DATA_PTL,
|
|
ISHTP_DRIVER_DATA_WCL,
|
|
};
|
|
|
|
#define ISH_FW_GEN_LNL_M "lnlm"
|
|
#define ISH_FW_GEN_PTL "ptl"
|
|
#define ISH_FW_GEN_WCL "wcl"
|
|
|
|
#define ISH_FIRMWARE_PATH(gen) "intel/ish/ish_" gen ".bin"
|
|
#define ISH_FIRMWARE_PATH_ALL "intel/ish/ish_*.bin"
|
|
|
|
static struct ishtp_driver_data ishtp_driver_data[] = {
|
|
[ISHTP_DRIVER_DATA_LNL_M] = {
|
|
.fw_generation = ISH_FW_GEN_LNL_M,
|
|
},
|
|
[ISHTP_DRIVER_DATA_PTL] = {
|
|
.fw_generation = ISH_FW_GEN_PTL,
|
|
},
|
|
[ISHTP_DRIVER_DATA_WCL] = {
|
|
.fw_generation = ISH_FW_GEN_WCL,
|
|
},
|
|
};
|
|
|
|
static const struct pci_device_id ish_pci_tbl[] = {
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ISH_CHV)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ISH_BXT_Ax)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ISH_BXT_Bx)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ISH_APL_Ax)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ISH_SPT_Ax)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ISH_CNL_Ax)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ISH_GLK_Ax)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ISH_CNL_H)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ISH_ICL_MOBILE)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ISH_SPT_H)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ISH_CML_LP)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ISH_CMP_H)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ISH_EHL_Ax)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ISH_TGL_LP)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ISH_TGL_H)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ISH_ADL_S)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ISH_ADL_P)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ISH_ADL_N)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ISH_RPL_S)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ISH_MTL_P)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ISH_ARL_H)},
|
|
{PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ISH_ARL_S)},
|
|
{PCI_DEVICE_DATA(INTEL, ISH_LNL_M, ISHTP_DRIVER_DATA_LNL_M)},
|
|
{PCI_DEVICE_DATA(INTEL, ISH_PTL_H, ISHTP_DRIVER_DATA_PTL)},
|
|
{PCI_DEVICE_DATA(INTEL, ISH_PTL_P, ISHTP_DRIVER_DATA_PTL)},
|
|
{PCI_DEVICE_DATA(INTEL, ISH_WCL, ISHTP_DRIVER_DATA_WCL)},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, ish_pci_tbl);
|
|
|
|
/**
|
|
* ish_event_tracer() - Callback function to dump trace messages
|
|
* @dev: ishtp device
|
|
* @format: printf style format
|
|
*
|
|
* Callback to direct log messages to Linux trace buffers
|
|
*/
|
|
static __printf(2, 3)
|
|
void ish_event_tracer(struct ishtp_device *dev, const char *format, ...)
|
|
{
|
|
if (trace_ishtp_dump_enabled()) {
|
|
va_list args;
|
|
char tmp_buf[100];
|
|
|
|
va_start(args, format);
|
|
vsnprintf(tmp_buf, sizeof(tmp_buf), format, args);
|
|
va_end(args);
|
|
|
|
trace_ishtp_dump(tmp_buf);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ish_init() - Init function
|
|
* @dev: ishtp device
|
|
*
|
|
* This function initialize wait queues for suspend/resume and call
|
|
* calls hadware initialization function. This will initiate
|
|
* startup sequence
|
|
*
|
|
* Return: 0 for success or error code for failure
|
|
*/
|
|
static int ish_init(struct ishtp_device *dev)
|
|
{
|
|
int ret;
|
|
|
|
/* Set the state of ISH HW to start */
|
|
ret = ish_hw_start(dev);
|
|
if (ret) {
|
|
dev_err(dev->devc, "ISH: hw start failed.\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Start the inter process communication to ISH processor */
|
|
ret = ishtp_start(dev);
|
|
if (ret) {
|
|
dev_err(dev->devc, "ISHTP: Protocol init failed.\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pci_device_id ish_invalid_pci_ids[] = {
|
|
/* Mehlow platform special pci ids */
|
|
{PCI_VDEVICE(INTEL, 0xA309)},
|
|
{PCI_VDEVICE(INTEL, 0xA30A)},
|
|
{}
|
|
};
|
|
|
|
static inline bool ish_should_enter_d0i3(struct pci_dev *pdev)
|
|
{
|
|
return !pm_suspend_via_firmware() || pdev->device == PCI_DEVICE_ID_INTEL_ISH_CHV;
|
|
}
|
|
|
|
static inline bool ish_should_leave_d0i3(struct pci_dev *pdev)
|
|
{
|
|
struct ishtp_device *dev = pci_get_drvdata(pdev);
|
|
u32 fwsts = dev->ops->get_fw_status(dev);
|
|
|
|
if (dev->suspend_flag || !IPC_IS_ISH_ILUP(fwsts))
|
|
return false;
|
|
|
|
return !pm_resume_via_firmware() || pdev->device == PCI_DEVICE_ID_INTEL_ISH_CHV;
|
|
}
|
|
|
|
/**
|
|
* ish_probe() - PCI driver probe callback
|
|
* @pdev: pci device
|
|
* @ent: pci device id
|
|
*
|
|
* Initialize PCI function, setup interrupt and call for ISH initialization
|
|
*
|
|
* Return: 0 for success or error code for failure
|
|
*/
|
|
static int ish_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
int ret;
|
|
struct ish_hw *hw;
|
|
unsigned long irq_flag = 0;
|
|
struct ishtp_device *ishtp;
|
|
struct device *dev = &pdev->dev;
|
|
|
|
/* Check for invalid platforms for ISH support */
|
|
if (pci_dev_present(ish_invalid_pci_ids))
|
|
return -ENODEV;
|
|
|
|
/* enable pci dev */
|
|
ret = pcim_enable_device(pdev);
|
|
if (ret) {
|
|
dev_err(dev, "ISH: Failed to enable PCI device\n");
|
|
return ret;
|
|
}
|
|
|
|
/* set PCI host mastering */
|
|
pci_set_master(pdev);
|
|
|
|
/* pci request regions for ISH driver */
|
|
ret = pcim_iomap_regions(pdev, 1 << 0, KBUILD_MODNAME);
|
|
if (ret) {
|
|
dev_err(dev, "ISH: Failed to get PCI regions\n");
|
|
return ret;
|
|
}
|
|
|
|
/* allocates and initializes the ISH dev structure */
|
|
ishtp = ish_dev_init(pdev);
|
|
if (!ishtp) {
|
|
ret = -ENOMEM;
|
|
return ret;
|
|
}
|
|
hw = to_ish_hw(ishtp);
|
|
ishtp->print_log = ish_event_tracer;
|
|
ishtp->driver_data = &ishtp_driver_data[ent->driver_data];
|
|
|
|
/* mapping IO device memory */
|
|
hw->mem_addr = pcim_iomap_table(pdev)[0];
|
|
ishtp->pdev = pdev;
|
|
|
|
/* request and enable interrupt */
|
|
ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
|
|
if (ret < 0) {
|
|
dev_err(dev, "ISH: Failed to allocate IRQ vectors\n");
|
|
return ret;
|
|
}
|
|
|
|
if (!pdev->msi_enabled && !pdev->msix_enabled)
|
|
irq_flag = IRQF_SHARED;
|
|
|
|
ret = devm_request_irq(dev, pdev->irq, ish_irq_handler,
|
|
irq_flag, KBUILD_MODNAME, ishtp);
|
|
if (ret) {
|
|
dev_err(dev, "ISH: request IRQ %d failed\n", pdev->irq);
|
|
return ret;
|
|
}
|
|
|
|
dev_set_drvdata(ishtp->devc, ishtp);
|
|
|
|
init_waitqueue_head(&ishtp->suspend_wait);
|
|
init_waitqueue_head(&ishtp->resume_wait);
|
|
|
|
/* Enable PME for EHL */
|
|
if (pdev->device == PCI_DEVICE_ID_INTEL_ISH_EHL_Ax)
|
|
device_init_wakeup(dev, true);
|
|
|
|
ret = ish_init(ishtp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ish_remove() - PCI driver remove callback
|
|
* @pdev: pci device
|
|
*
|
|
* This function does cleanup of ISH on pci remove callback
|
|
*/
|
|
static void ish_remove(struct pci_dev *pdev)
|
|
{
|
|
struct ishtp_device *ishtp_dev = pci_get_drvdata(pdev);
|
|
|
|
ishtp_bus_remove_all_clients(ishtp_dev, false);
|
|
ish_device_disable(ishtp_dev);
|
|
}
|
|
|
|
|
|
/**
|
|
* ish_shutdown() - PCI driver shutdown callback
|
|
* @pdev: pci device
|
|
*
|
|
* This function sets up wakeup for S5
|
|
*/
|
|
static void ish_shutdown(struct pci_dev *pdev)
|
|
{
|
|
if (pdev->device == PCI_DEVICE_ID_INTEL_ISH_EHL_Ax)
|
|
pci_prepare_to_sleep(pdev);
|
|
}
|
|
|
|
static struct device __maybe_unused *ish_resume_device;
|
|
|
|
/**
|
|
* ish_resume_handler() - Work function to complete resume
|
|
* @work: work struct
|
|
*
|
|
* The resume work function to complete resume function asynchronously.
|
|
* There are two resume paths, one where ISH is not powered off,
|
|
* in that case a simple resume message is enough, others we need
|
|
* a reset sequence.
|
|
*/
|
|
static void __maybe_unused ish_resume_handler(struct work_struct *work)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ish_resume_device);
|
|
struct ishtp_device *dev = pci_get_drvdata(pdev);
|
|
|
|
if (ish_should_leave_d0i3(pdev)) {
|
|
if (device_may_wakeup(&pdev->dev))
|
|
disable_irq_wake(pdev->irq);
|
|
|
|
ish_set_host_ready(dev);
|
|
|
|
ishtp_send_resume(dev);
|
|
|
|
/* Waiting to get resume response */
|
|
if (dev->resume_flag)
|
|
wait_event_interruptible_timeout(dev->resume_wait,
|
|
!dev->resume_flag,
|
|
msecs_to_jiffies(WAIT_FOR_RESUME_ACK_MS));
|
|
|
|
/*
|
|
* If the flag is not cleared, something is wrong with ISH FW.
|
|
* So on resume, need to go through init sequence again.
|
|
*/
|
|
if (dev->resume_flag)
|
|
ish_init(dev);
|
|
} else {
|
|
/*
|
|
* Resume from the D3, full reboot of ISH processor will happen,
|
|
* so need to go through init sequence again.
|
|
*/
|
|
ish_init(dev);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ish_suspend() - ISH suspend callback
|
|
* @device: device pointer
|
|
*
|
|
* ISH suspend callback
|
|
*
|
|
* Return: 0 to the pm core
|
|
*/
|
|
static int __maybe_unused ish_suspend(struct device *device)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(device);
|
|
struct ishtp_device *dev = pci_get_drvdata(pdev);
|
|
|
|
if (ish_should_enter_d0i3(pdev)) {
|
|
/*
|
|
* If previous suspend hasn't been asnwered then ISH is likely
|
|
* dead, don't attempt nested notification
|
|
*/
|
|
if (dev->suspend_flag)
|
|
return 0;
|
|
|
|
dev->resume_flag = 0;
|
|
dev->suspend_flag = 1;
|
|
ishtp_send_suspend(dev);
|
|
|
|
/* 25 ms should be enough for live ISH to flush all IPC buf */
|
|
if (dev->suspend_flag)
|
|
wait_event_interruptible_timeout(dev->suspend_wait,
|
|
!dev->suspend_flag,
|
|
msecs_to_jiffies(25));
|
|
|
|
if (dev->suspend_flag) {
|
|
/*
|
|
* It looks like FW halt, clear the DMA bit, and put
|
|
* ISH into D3, and FW would reset on resume.
|
|
*/
|
|
ish_disable_dma(dev);
|
|
} else {
|
|
/*
|
|
* Save state so PCI core will keep the device at D0,
|
|
* the ISH would enter D0i3
|
|
*/
|
|
pci_save_state(pdev);
|
|
|
|
if (device_may_wakeup(&pdev->dev))
|
|
enable_irq_wake(pdev->irq);
|
|
}
|
|
} else {
|
|
/*
|
|
* Clear the DMA bit before putting ISH into D3,
|
|
* or ISH FW would reset automatically.
|
|
*/
|
|
ish_disable_dma(dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static __maybe_unused DECLARE_WORK(resume_work, ish_resume_handler);
|
|
/**
|
|
* ish_resume() - ISH resume callback
|
|
* @device: device pointer
|
|
*
|
|
* ISH resume callback
|
|
*
|
|
* Return: 0 to the pm core
|
|
*/
|
|
static int __maybe_unused ish_resume(struct device *device)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(device);
|
|
struct ishtp_device *dev = pci_get_drvdata(pdev);
|
|
|
|
ish_resume_device = device;
|
|
dev->resume_flag = 1;
|
|
|
|
/* If ISH resume from D3, reset ishtp clients before return */
|
|
if (!ish_should_leave_d0i3(pdev))
|
|
ishtp_reset_handler(dev);
|
|
|
|
queue_work(dev->unbound_wq, &resume_work);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused ish_freeze(struct device *device)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(device);
|
|
|
|
return pci_save_state(pdev);
|
|
}
|
|
|
|
static const struct dev_pm_ops __maybe_unused ish_pm_ops = {
|
|
.suspend = pm_sleep_ptr(ish_suspend),
|
|
.resume = pm_sleep_ptr(ish_resume),
|
|
.freeze = pm_sleep_ptr(ish_freeze),
|
|
.restore = pm_sleep_ptr(ish_resume),
|
|
.poweroff = pm_sleep_ptr(ish_suspend),
|
|
};
|
|
|
|
static ssize_t base_version_show(struct device *cdev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct ishtp_device *dev = dev_get_drvdata(cdev);
|
|
|
|
return sysfs_emit(buf, "%u.%u.%u.%u\n", dev->base_ver.major,
|
|
dev->base_ver.minor, dev->base_ver.hotfix,
|
|
dev->base_ver.build);
|
|
}
|
|
static DEVICE_ATTR_RO(base_version);
|
|
|
|
static ssize_t project_version_show(struct device *cdev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct ishtp_device *dev = dev_get_drvdata(cdev);
|
|
|
|
return sysfs_emit(buf, "%u.%u.%u.%u\n", dev->prj_ver.major,
|
|
dev->prj_ver.minor, dev->prj_ver.hotfix,
|
|
dev->prj_ver.build);
|
|
}
|
|
static DEVICE_ATTR_RO(project_version);
|
|
|
|
static struct attribute *ish_firmware_attrs[] = {
|
|
&dev_attr_base_version.attr,
|
|
&dev_attr_project_version.attr,
|
|
NULL
|
|
};
|
|
|
|
static umode_t firmware_is_visible(struct kobject *kobj, struct attribute *attr,
|
|
int i)
|
|
{
|
|
struct ishtp_device *dev = dev_get_drvdata(kobj_to_dev(kobj));
|
|
|
|
return dev->driver_data->fw_generation ? attr->mode : 0;
|
|
}
|
|
|
|
static const struct attribute_group ish_firmware_group = {
|
|
.name = "firmware",
|
|
.attrs = ish_firmware_attrs,
|
|
.is_visible = firmware_is_visible,
|
|
};
|
|
|
|
__ATTRIBUTE_GROUPS(ish_firmware);
|
|
|
|
static struct pci_driver ish_driver = {
|
|
.name = KBUILD_MODNAME,
|
|
.id_table = ish_pci_tbl,
|
|
.probe = ish_probe,
|
|
.remove = ish_remove,
|
|
.shutdown = ish_shutdown,
|
|
.driver.pm = &ish_pm_ops,
|
|
.dev_groups = ish_firmware_groups,
|
|
};
|
|
|
|
module_pci_driver(ish_driver);
|
|
|
|
/* Original author */
|
|
MODULE_AUTHOR("Daniel Drubin <daniel.drubin@intel.com>");
|
|
/* Adoption to upstream Linux kernel */
|
|
MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
|
|
|
|
MODULE_DESCRIPTION("Intel(R) Integrated Sensor Hub PCI Device Driver");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_FIRMWARE(ISH_FIRMWARE_PATH(ISH_FW_GEN_LNL_M));
|
|
MODULE_FIRMWARE(ISH_FIRMWARE_PATH_ALL);
|