Files
linux/Documentation/devicetree/bindings/media/arm,mali-c55.yaml
Daniel Scally 3743764750 dt-bindings: media: Add bindings for ARM mali-c55
Add the yaml binding for ARM's Mali-C55 Image Signal Processor.

Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Nayden Kanchev <nayden.kanchev@arm.com>
Co-developed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
2025-11-14 15:48:49 +01:00

87 lines
1.7 KiB
YAML

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/media/arm,mali-c55.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: ARM Mali-C55 Image Signal Processor
maintainers:
- Daniel Scally <dan.scally@ideasonboard.com>
- Jacopo Mondi <jacopo.mondi@ideasonboard.com>
properties:
compatible:
const: arm,mali-c55
reg:
maxItems: 1
interrupts:
maxItems: 1
clocks:
items:
- description: ISP Video Clock
- description: ISP AXI clock
- description: ISP AHB-lite clock
clock-names:
items:
- const: vclk
- const: aclk
- const: hclk
resets:
items:
- description: vclk domain reset
- description: aclk domain reset
- description: hclk domain reset
reset-names:
items:
- const: vresetn
- const: aresetn
- const: hresetn
port:
$ref: /schemas/graph.yaml#/properties/port
description: Input parallel video bus
properties:
endpoint:
$ref: /schemas/graph.yaml#/properties/endpoint
required:
- compatible
- reg
- interrupts
- clocks
- clock-names
- resets
- reset-names
- port
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
isp@400000 {
compatible = "arm,mali-c55";
reg = <0x400000 0x200000>;
clocks = <&clk 0>, <&clk 1>, <&clk 2>;
clock-names = "vclk", "aclk", "hclk";
resets = <&resets 0>, <&resets 1>, <&resets 2>;
reset-names = "vresetn", "aresetn", "hresetn";
interrupts = <GIC_SPI 861 IRQ_TYPE_EDGE_RISING>;
port {
isp_in: endpoint {
remote-endpoint = <&csi2_rx_out>;
};
};
};
...