Files
linux/include/net/bond_options.h
Hangbin Liu 6b6dc81ee7 bonding: add support for per-port LACP actor priority
Introduce a new netlink attribute 'actor_port_prio' to allow setting
the LACP actor port priority on a per-slave basis. This extends the
existing bonding infrastructure to support more granular control over
LACP negotiations.

The priority value is embedded in LACPDU packets and will be used by
subsequent patches to influence aggregator selection policies.

Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250902064501.360822-2-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-09-09 10:56:02 +02:00

170 lines
4.9 KiB
C

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* drivers/net/bond/bond_options.h - bonding options
* Copyright (c) 2013 Nikolay Aleksandrov <nikolay@redhat.com>
*/
#ifndef _NET_BOND_OPTIONS_H
#define _NET_BOND_OPTIONS_H
#include <linux/bits.h>
#include <linux/limits.h>
#include <linux/types.h>
#include <linux/string.h>
struct netlink_ext_ack;
struct nlattr;
#define BOND_OPT_MAX_NAMELEN 32
#define BOND_OPT_VALID(opt) ((opt) < BOND_OPT_LAST)
#define BOND_MODE_ALL_EX(x) (~(x))
/* Option flags:
* BOND_OPTFLAG_NOSLAVES - check if the bond device is empty before setting
* BOND_OPTFLAG_IFDOWN - check if the bond device is down before setting
* BOND_OPTFLAG_RAWVAL - the option parses the value itself
*/
enum {
BOND_OPTFLAG_NOSLAVES = BIT(0),
BOND_OPTFLAG_IFDOWN = BIT(1),
BOND_OPTFLAG_RAWVAL = BIT(2)
};
/* Value type flags:
* BOND_VALFLAG_DEFAULT - mark the value as default
* BOND_VALFLAG_(MIN|MAX) - mark the value as min/max
*/
enum {
BOND_VALFLAG_DEFAULT = BIT(0),
BOND_VALFLAG_MIN = BIT(1),
BOND_VALFLAG_MAX = BIT(2)
};
/* Option IDs, their bit positions correspond to their IDs */
enum {
BOND_OPT_MODE,
BOND_OPT_PACKETS_PER_SLAVE,
BOND_OPT_XMIT_HASH,
BOND_OPT_ARP_VALIDATE,
BOND_OPT_ARP_ALL_TARGETS,
BOND_OPT_FAIL_OVER_MAC,
BOND_OPT_ARP_INTERVAL,
BOND_OPT_ARP_TARGETS,
BOND_OPT_DOWNDELAY,
BOND_OPT_UPDELAY,
BOND_OPT_LACP_RATE,
BOND_OPT_MINLINKS,
BOND_OPT_AD_SELECT,
BOND_OPT_NUM_PEER_NOTIF,
BOND_OPT_MIIMON,
BOND_OPT_PRIMARY,
BOND_OPT_PRIMARY_RESELECT,
BOND_OPT_USE_CARRIER,
BOND_OPT_ACTIVE_SLAVE,
BOND_OPT_QUEUE_ID,
BOND_OPT_ALL_SLAVES_ACTIVE,
BOND_OPT_RESEND_IGMP,
BOND_OPT_LP_INTERVAL,
BOND_OPT_SLAVES,
BOND_OPT_TLB_DYNAMIC_LB,
BOND_OPT_AD_ACTOR_SYS_PRIO,
BOND_OPT_AD_ACTOR_SYSTEM,
BOND_OPT_AD_USER_PORT_KEY,
BOND_OPT_NUM_PEER_NOTIF_ALIAS,
BOND_OPT_PEER_NOTIF_DELAY,
BOND_OPT_LACP_ACTIVE,
BOND_OPT_MISSED_MAX,
BOND_OPT_NS_TARGETS,
BOND_OPT_PRIO,
BOND_OPT_COUPLED_CONTROL,
BOND_OPT_BROADCAST_NEIGH,
BOND_OPT_ACTOR_PORT_PRIO,
BOND_OPT_LAST
};
/* This structure is used for storing option values and for passing option
* values when changing an option. The logic when used as an arg is as follows:
* - if value != ULLONG_MAX -> parse value
* - if string != NULL -> parse string
* - if the opt is RAW data and length less than maxlen,
* copy the data to extra storage
*/
#define BOND_OPT_EXTRA_MAXLEN 16
struct bond_opt_value {
char *string;
u64 value;
u32 flags;
union {
char extra[BOND_OPT_EXTRA_MAXLEN];
struct net_device *slave_dev;
};
};
struct bonding;
struct bond_option {
int id;
const char *name;
const char *desc;
u32 flags;
/* unsuppmodes is used to denote modes in which the option isn't
* supported.
*/
unsigned long unsuppmodes;
/* supported values which this option can have, can be a subset of
* BOND_OPTVAL_RANGE's value range
*/
const struct bond_opt_value *values;
int (*set)(struct bonding *bond, const struct bond_opt_value *val);
};
int __bond_opt_set(struct bonding *bond, unsigned int option,
struct bond_opt_value *val,
struct nlattr *bad_attr, struct netlink_ext_ack *extack);
int __bond_opt_set_notify(struct bonding *bond, unsigned int option,
struct bond_opt_value *val);
int bond_opt_tryset_rtnl(struct bonding *bond, unsigned int option, char *buf);
const struct bond_opt_value *bond_opt_parse(const struct bond_option *opt,
struct bond_opt_value *val);
const struct bond_option *bond_opt_get(unsigned int option);
const struct bond_option *bond_opt_get_by_name(const char *name);
const struct bond_opt_value *bond_opt_get_val(unsigned int option, u64 val);
/* This helper is used to initialize a bond_opt_value structure for parameter
* passing. There should be either a valid string or value, but not both.
* When value is ULLONG_MAX then string will be used.
*/
static inline void __bond_opt_init(struct bond_opt_value *optval,
char *string, u64 value,
void *extra, size_t extra_len)
{
memset(optval, 0, sizeof(*optval));
optval->value = ULLONG_MAX;
if (value != ULLONG_MAX)
optval->value = value;
else if (string)
optval->string = string;
if (extra && extra_len <= BOND_OPT_EXTRA_MAXLEN)
memcpy(optval->extra, extra, extra_len);
}
#define bond_opt_initval(optval, value) __bond_opt_init(optval, NULL, value, NULL, 0)
#define bond_opt_initstr(optval, str) __bond_opt_init(optval, str, ULLONG_MAX, NULL, 0)
#define bond_opt_initextra(optval, extra, extra_len) \
__bond_opt_init(optval, NULL, ULLONG_MAX, extra, extra_len)
#define bond_opt_slave_initval(optval, slave_dev, value) \
__bond_opt_init(optval, NULL, value, slave_dev, sizeof(struct net_device *))
void bond_option_arp_ip_targets_clear(struct bonding *bond);
#if IS_ENABLED(CONFIG_IPV6)
void bond_option_ns_ip6_targets_clear(struct bonding *bond);
#endif
void bond_slave_ns_maddrs_add(struct bonding *bond, struct slave *slave);
void bond_slave_ns_maddrs_del(struct bonding *bond, struct slave *slave);
#endif /* _NET_BOND_OPTIONS_H */