mirror of
https://github.com/torvalds/linux.git
synced 2025-12-07 20:06:24 +00:00
d425aef66e
Enable proper pin multiplexing for the I2S1 8-channel transmit interface by
adding the default pinctrl configuration which esures correct signal routing
and avoids pinmux conflicts during audio playback.
Changes fix the error
[ 116.856643] [ T782] rockchip-pinctrl pinctrl: pin gpio1-10 already requested by affinity_hint; cannot claim for fe410000.i2s
[ 116.857567] [ T782] rockchip-pinctrl pinctrl: error -EINVAL: pin-42 (fe410000.i2s)
[ 116.857618] [ T782] rockchip-pinctrl pinctrl: error -EINVAL: could not request pin 42 (gpio1-10) from group i2s1m0-sdi1 on device rockchip-pinctrl
[ 116.857659] [ T782] rockchip-i2s-tdm fe410000.i2s: Error applying setting, reverse things back
I2S1 on the M1 to the codec in the RK809 only uses the SCLK, LRCK, SDI0
and SDO0 signals, so limit the claimed pins to those.
With this change audio output works as expected:
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDMI], device 0: fe400000.i2s-i2s-hifi i2s-hifi-0 [fe400000.i2s-i2s-hifi i2s-hifi-0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: RK817 [Analog RK817], device 0: fe410000.i2s-rk817-hifi rk817-hifi-0 [fe410000.i2s-rk817-hifi rk817-hifi-0]
Subdevices: 1/1
Subdevice #0: subdevice #0
Fixes: 78f858447c ("arm64: dts: rockchip: Add analog audio on ODROID-M1")
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
[adapted the commit message a bit]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
744 lines
15 KiB
Plaintext
744 lines
15 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2022 Hardkernel Co., Ltd.
|
|
*
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/leds/common.h>
|
|
#include <dt-bindings/pinctrl/rockchip.h>
|
|
#include <dt-bindings/soc/rockchip,vop2.h>
|
|
#include "rk3568.dtsi"
|
|
|
|
/ {
|
|
model = "Hardkernel ODROID-M1";
|
|
compatible = "hardkernel,odroid-m1", "rockchip,rk3568";
|
|
|
|
aliases {
|
|
ethernet0 = &gmac0;
|
|
i2c0 = &i2c3;
|
|
i2c3 = &i2c0;
|
|
mmc0 = &sdhci;
|
|
mmc1 = &sdmmc0;
|
|
serial0 = &uart1;
|
|
serial1 = &uart0;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial2:1500000n8";
|
|
};
|
|
|
|
dc_12v: regulator-dc-12v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "dc_12v";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <12000000>;
|
|
regulator-max-microvolt = <12000000>;
|
|
};
|
|
|
|
hdmi-con {
|
|
compatible = "hdmi-connector";
|
|
type = "a";
|
|
|
|
port {
|
|
hdmi_con_in: endpoint {
|
|
remote-endpoint = <&hdmi_out_con>;
|
|
};
|
|
};
|
|
};
|
|
|
|
ir-receiver {
|
|
compatible = "gpio-ir-receiver";
|
|
gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ir_receiver_pin>;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led_power: led-0 {
|
|
gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
|
|
function = LED_FUNCTION_POWER;
|
|
color = <LED_COLOR_ID_RED>;
|
|
default-state = "keep";
|
|
linux,default-trigger = "default-on";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&led_power_pin>;
|
|
};
|
|
led_work: led-1 {
|
|
gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
|
|
function = LED_FUNCTION_HEARTBEAT;
|
|
color = <LED_COLOR_ID_BLUE>;
|
|
linux,default-trigger = "heartbeat";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&led_work_pin>;
|
|
};
|
|
};
|
|
|
|
rk809-sound {
|
|
compatible = "simple-audio-card";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hp_det_pin>;
|
|
simple-audio-card,name = "Analog RK817";
|
|
simple-audio-card,format = "i2s";
|
|
simple-audio-card,hp-det-gpios = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
|
|
simple-audio-card,mclk-fs = <256>;
|
|
simple-audio-card,widgets =
|
|
"Headphone", "Headphones",
|
|
"Speaker", "Speaker";
|
|
simple-audio-card,routing =
|
|
"Headphones", "HPOL",
|
|
"Headphones", "HPOR",
|
|
"Speaker", "SPKO";
|
|
|
|
simple-audio-card,cpu {
|
|
sound-dai = <&i2s1_8ch>;
|
|
};
|
|
|
|
simple-audio-card,codec {
|
|
sound-dai = <&rk809>;
|
|
};
|
|
};
|
|
|
|
vcc3v3_pcie: regulator-vcc3v3-pcie {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3_pcie";
|
|
enable-active-high;
|
|
gpio = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vcc3v3_pcie_en_pin>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
startup-delay-us = <5000>;
|
|
vin-supply = <&vcc3v3_sys>;
|
|
};
|
|
|
|
vcc3v3_sys: regulator-vcc3v3-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc3v3_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
vin-supply = <&dc_12v>;
|
|
};
|
|
|
|
vcc5v0_sys: regulator-vcc5v0-sys {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_sys";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&dc_12v>;
|
|
};
|
|
|
|
vcc5v0_usb_host: regulator-vcc5v0-usb-host {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_usb_host";
|
|
enable-active-high;
|
|
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vcc5v0_usb_host_en_pin>;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
|
|
vcc5v0_usb_otg: regulator-vcc5v0-usb-otg {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vcc5v0_usb_otg";
|
|
enable-active-high;
|
|
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&vcc5v0_usb_otg_en_pin>;
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
vin-supply = <&vcc5v0_sys>;
|
|
};
|
|
};
|
|
|
|
&combphy0 {
|
|
/* Used for USB3 */
|
|
phy-supply = <&vcc5v0_usb_host>;
|
|
status = "okay";
|
|
};
|
|
|
|
&combphy1 {
|
|
/* Used for USB3 */
|
|
phy-supply = <&vcc5v0_usb_otg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&combphy2 {
|
|
/* used for SATA */
|
|
status = "okay";
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <&vdd_cpu>;
|
|
};
|
|
|
|
&cpu1 {
|
|
cpu-supply = <&vdd_cpu>;
|
|
};
|
|
|
|
&cpu2 {
|
|
cpu-supply = <&vdd_cpu>;
|
|
};
|
|
|
|
&cpu3 {
|
|
cpu-supply = <&vdd_cpu>;
|
|
};
|
|
|
|
&gmac0 {
|
|
assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
|
|
assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
|
|
assigned-clock-rates = <0>, <125000000>;
|
|
clock_in_out = "output";
|
|
phy-handle = <&rgmii_phy0>;
|
|
phy-mode = "rgmii";
|
|
phy-supply = <&vcc3v3_sys>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gmac0_miim
|
|
&gmac0_tx_bus2
|
|
&gmac0_rx_bus2
|
|
&gmac0_rgmii_clk
|
|
&gmac0_rgmii_bus>;
|
|
status = "okay";
|
|
|
|
tx_delay = <0x4f>;
|
|
rx_delay = <0x2d>;
|
|
};
|
|
|
|
&gpu {
|
|
mali-supply = <&vdd_gpu>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi {
|
|
avdd-0v9-supply = <&vdda0v9_image>;
|
|
avdd-1v8-supply = <&vcca1v8_image>;
|
|
status = "okay";
|
|
};
|
|
|
|
&hdmi_in {
|
|
hdmi_in_vp0: endpoint {
|
|
remote-endpoint = <&vp0_out_hdmi>;
|
|
};
|
|
};
|
|
|
|
&hdmi_out {
|
|
hdmi_out_con: endpoint {
|
|
remote-endpoint = <&hdmi_con_in>;
|
|
};
|
|
};
|
|
|
|
&hdmi_sound {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
|
|
vdd_cpu: regulator@1c {
|
|
compatible = "tcs,tcs4525";
|
|
reg = <0x1c>;
|
|
fcs,suspend-voltage-selector = <1>;
|
|
regulator-name = "vdd_cpu";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <800000>;
|
|
regulator-max-microvolt = <1150000>;
|
|
regulator-ramp-delay = <2300>;
|
|
vin-supply = <&vcc3v3_sys>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
rk809: pmic@20 {
|
|
compatible = "rockchip,rk809";
|
|
reg = <0x20>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
|
assigned-clocks = <&cru I2S1_MCLKOUT_TX>;
|
|
assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>;
|
|
#clock-cells = <1>;
|
|
clock-names = "mclk";
|
|
clocks = <&cru I2S1_MCLKOUT_TX>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pmic_int_l>, <&i2s1m0_mclk>;
|
|
system-power-controller;
|
|
#sound-dai-cells = <0>;
|
|
vcc1-supply = <&vcc3v3_sys>;
|
|
vcc2-supply = <&vcc3v3_sys>;
|
|
vcc3-supply = <&vcc3v3_sys>;
|
|
vcc4-supply = <&vcc3v3_sys>;
|
|
vcc5-supply = <&vcc3v3_sys>;
|
|
vcc6-supply = <&vcc3v3_sys>;
|
|
vcc7-supply = <&vcc3v3_sys>;
|
|
vcc8-supply = <&vcc3v3_sys>;
|
|
vcc9-supply = <&vcc3v3_sys>;
|
|
wakeup-source;
|
|
|
|
regulators {
|
|
vdd_logic: DCDC_REG1 {
|
|
regulator-name = "vdd_logic";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-initial-mode = <0x2>;
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-ramp-delay = <6001>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_gpu: DCDC_REG2 {
|
|
regulator-name = "vdd_gpu";
|
|
regulator-always-on;
|
|
regulator-initial-mode = <0x2>;
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-ramp-delay = <6001>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_ddr: DCDC_REG3 {
|
|
regulator-name = "vcc_ddr";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-initial-mode = <0x2>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdd_npu: DCDC_REG4 {
|
|
regulator-name = "vdd_npu";
|
|
regulator-initial-mode = <0x2>;
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-ramp-delay = <6001>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_1v8: DCDC_REG5 {
|
|
regulator-name = "vcc_1v8";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdda0v9_image: LDO_REG1 {
|
|
regulator-name = "vdda0v9_image";
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdda_0v9: LDO_REG2 {
|
|
regulator-name = "vdda_0v9";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vdda0v9_pmu: LDO_REG3 {
|
|
regulator-name = "vdda0v9_pmu";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <900000>;
|
|
};
|
|
};
|
|
|
|
vccio_acodec: LDO_REG4 {
|
|
regulator-name = "vccio_acodec";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vccio_sd: LDO_REG5 {
|
|
regulator-name = "vccio_sd";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc3v3_pmu: LDO_REG6 {
|
|
regulator-name = "vcc3v3_pmu";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <3300000>;
|
|
};
|
|
};
|
|
|
|
vcca_1v8: LDO_REG7 {
|
|
regulator-name = "vcca_1v8";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcca1v8_pmu: LDO_REG8 {
|
|
regulator-name = "vcca1v8_pmu";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-on-in-suspend;
|
|
regulator-suspend-microvolt = <1800000>;
|
|
};
|
|
};
|
|
|
|
vcca1v8_image: LDO_REG9 {
|
|
regulator-name = "vcca1v8_image";
|
|
regulator-always-on;
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc_3v3: SWITCH_REG1 {
|
|
regulator-name = "vcc_3v3";
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
|
|
vcc3v3_sd: SWITCH_REG2 {
|
|
regulator-name = "vcc3v3_sd";
|
|
|
|
regulator-state-mem {
|
|
regulator-off-in-suspend;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2s0_8ch {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2s1_8ch {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
|
|
rockchip,trcm-sync-tx-only;
|
|
status = "okay";
|
|
};
|
|
|
|
&mdio0 {
|
|
rgmii_phy0: ethernet-phy@0 {
|
|
compatible = "ethernet-phy-ieee802.3-c22";
|
|
reg = <0x0>;
|
|
reset-assert-us = <20000>;
|
|
reset-deassert-us = <100000>;
|
|
reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
&pcie30phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie3x2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie_reset_pin>;
|
|
reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
|
|
vpcie3v3-supply = <&vcc3v3_pcie>;
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
fspi {
|
|
fspi_dual_io_pins: fspi-dual-io-pins {
|
|
rockchip,pins =
|
|
/* fspi_clk */
|
|
<1 RK_PD0 1 &pcfg_pull_none>,
|
|
/* fspi_cs0n */
|
|
<1 RK_PD3 1 &pcfg_pull_none>,
|
|
/* fspi_d0 */
|
|
<1 RK_PD1 1 &pcfg_pull_none>,
|
|
/* fspi_d1 */
|
|
<1 RK_PD2 1 &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
ir-receiver {
|
|
ir_receiver_pin: ir-receiver-pin {
|
|
/* external pullup to VCC3V3_SYS */
|
|
rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
led_power_pin: led-power-pin {
|
|
rockchip,pins = <0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
led_work_pin: led-work-pin {
|
|
rockchip,pins = <0 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pcie {
|
|
pcie_reset_pin: pcie-reset-pin {
|
|
rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
vcc3v3_pcie_en_pin: vcc3v3-pcie-en-pin {
|
|
rockchip,pins = <4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
pmic {
|
|
pmic_int_l: pmic-int-l {
|
|
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
};
|
|
};
|
|
|
|
rk809 {
|
|
hp_det_pin: hp-det-pin {
|
|
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
|
|
usb {
|
|
vcc5v0_usb_host_en_pin: vcc5v0-usb-host-en-pin {
|
|
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
vcc5v0_usb_otg_en_pin: vcc5v0-usb-dr-en-pin {
|
|
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pmu_io_domains {
|
|
pmuio1-supply = <&vcc3v3_pmu>;
|
|
pmuio2-supply = <&vcc3v3_pmu>;
|
|
vccio1-supply = <&vccio_acodec>;
|
|
vccio2-supply = <&vcc_1v8>;
|
|
vccio3-supply = <&vccio_sd>;
|
|
vccio4-supply = <&vcc_1v8>;
|
|
vccio5-supply = <&vcc_3v3>;
|
|
vccio6-supply = <&vcc_3v3>;
|
|
vccio7-supply = <&vcc_3v3>;
|
|
status = "okay";
|
|
};
|
|
|
|
&saradc {
|
|
vref-supply = <&vcca_1v8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sata2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&sdhci {
|
|
bus-width = <8>;
|
|
max-frequency = <200000000>;
|
|
non-removable;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>;
|
|
vmmc-supply = <&vcc_3v3>;
|
|
vqmmc-supply = <&vcc_1v8>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sdmmc0 {
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
|
|
disable-wp;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
|
sd-uhs-sdr50;
|
|
vmmc-supply = <&vcc3v3_sd>;
|
|
vqmmc-supply = <&vccio_sd>;
|
|
status = "okay";
|
|
};
|
|
|
|
&sfc {
|
|
/* Dual I/O mode as the D2 pin conflicts with the eMMC */
|
|
pinctrl-0 = <&fspi_dual_io_pins>;
|
|
pinctrl-names = "default";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <100000000>;
|
|
spi-rx-bus-width = <2>;
|
|
spi-tx-bus-width = <1>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
label = "SPL";
|
|
reg = <0x0 0xe0000>;
|
|
};
|
|
partition@e0000 {
|
|
label = "U-Boot Env";
|
|
reg = <0xe0000 0x20000>;
|
|
};
|
|
partition@100000 {
|
|
label = "U-Boot";
|
|
reg = <0x100000 0x200000>;
|
|
};
|
|
partition@300000 {
|
|
label = "splash";
|
|
reg = <0x300000 0x100000>;
|
|
};
|
|
partition@400000 {
|
|
label = "Filesystem";
|
|
reg = <0x400000 0xc00000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&tsadc {
|
|
rockchip,hw-tshut-mode = <1>;
|
|
rockchip,hw-tshut-polarity = <0>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host0_xhci {
|
|
dr_mode = "host";
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_ehci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_ohci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_host1_xhci {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2phy0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2phy0_host {
|
|
phy-supply = <&vcc5v0_usb_host>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2phy0_otg {
|
|
phy-supply = <&vcc5v0_usb_otg>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2phy1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2phy1_host {
|
|
phy-supply = <&vcc5v0_usb_host>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usb2phy1_otg {
|
|
phy-supply = <&vcc5v0_usb_host>;
|
|
status = "okay";
|
|
};
|
|
|
|
&vop {
|
|
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
|
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
|
status = "okay";
|
|
};
|
|
|
|
&vop_mmu {
|
|
status = "okay";
|
|
};
|
|
|
|
&vp0 {
|
|
vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
|
|
reg = <ROCKCHIP_VOP2_EP_HDMI0>;
|
|
remote-endpoint = <&hdmi_in_vp0>;
|
|
};
|
|
};
|