Pull tracing fixes from Steven Rostedt:
- Do not allow large strings (> 4096) as single write to trace_marker
The size of a string written into trace_marker was determined by the
size of the sub-buffer in the ring buffer. That size is dependent on
the PAGE_SIZE of the architecture as it can be mapped into user
space. But on PowerPC, where PAGE_SIZE is 64K, that made the limit of
the string of writing into trace_marker 64K.
One of the selftests looks at the size of the ring buffer sub-buffers
and writes that plus more into the trace_marker. The write will take
what it can and report back what it consumed so that the user space
application (like echo) will write the rest of the string. The string
is stored in the ring buffer and can be read via the "trace" or
"trace_pipe" files.
The reading of the ring buffer uses vsnprintf(), which uses a
precision "%.*s" to make sure it only reads what is stored in the
buffer, as a bug could cause the string to be non terminated.
With the combination of the precision change and the PAGE_SIZE of 64K
allowing huge strings to be added into the ring buffer, plus the test
that would actually stress that limit, a bug was reported that the
precision used was too big for "%.*s" as the string was close to 64K
in size and the max precision of vsnprintf is 32K.
Linus suggested not to have that precision as it could hide a bug if
the string was again stored without a nul byte.
Another issue that was brought up is that the trace_seq buffer is
also based on PAGE_SIZE even though it is not tied to the
architecture limit like the ring buffer sub-buffer is. Having it be
64K * 2 is simply just too big and wasting memory on systems with 64K
page sizes. It is now hardcoded to 8K which is what all other
architectures with 4K PAGE_SIZE has.
Finally, the write to trace_marker is now limited to 4K as there is
no reason to write larger strings into trace_marker.
- ring_buffer_wait() should not loop.
The ring_buffer_wait() does not have the full context (yet) on if it
should loop or not. Just exit the loop as soon as its woken up and
let the callers decide to loop or not (they already do, so it's a bit
redundant).
- Fix shortest_full field to be the smallest amount in the ring buffer
that a waiter is waiting for. The "shortest_full" field is updated
when a new waiter comes in and wants to wait for a smaller amount of
data in the ring buffer than other waiters. But after all waiters are
woken up, it's not reset, so if another waiter comes in wanting to
wait for more data, it will be woken up when the ring buffer has a
smaller amount from what the previous waiters were waiting for.
- The wake up all waiters on close is incorrectly called frome
.release() and not from .flush() so it will never wake up any waiters
as the .release() will not get called until all .read() calls are
finished. And the wakeup is for the waiters in those .read() calls.
* tag 'trace-ring-buffer-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Use .flush() call to wake up readers
ring-buffer: Fix resetting of shortest_full
ring-buffer: Fix waking up ring buffer readers
tracing: Limit trace_marker writes to just 4K
tracing: Limit trace_seq size to just 8K and not depend on architecture PAGE_SIZE
tracing: Remove precision vsnprintf() check from print event
Pull phy fixes from Vinod Koul:
- fixes for Qualcomm qmp-combo driver for ordering of drm and type-c
switch registartion due to drivers might not probe defer after having
registered child devices to avoid triggering a probe deferral loop.
This fixes internal display on Lenovo ThinkPad X13s
* tag 'phy-fixes3-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: qcom-qmp-combo: fix type-c switch registration
phy: qcom-qmp-combo: fix drm bridge registration
The .release() function does not get called until all readers of a file
descriptor are finished.
If a thread is blocked on reading a file descriptor in ring_buffer_wait(),
and another thread closes the file descriptor, it will not wake up the
other thread as ring_buffer_wake_waiters() is called by .release(), and
that will not get called until the .read() is finished.
The issue originally showed up in trace-cmd, but the readers are actually
other processes with their own file descriptors. So calling close() would wake
up the other tasks because they are blocked on another descriptor then the
one that was closed(). But there's other wake ups that solve that issue.
When a thread is blocked on a read, it can still hang even when another
thread closed its descriptor.
This is what the .flush() callback is for. Have the .flush() wake up the
readers.
Link: https://lore.kernel.org/linux-trace-kernel/20240308202432.107909457@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linke li <lilinke99@qq.com>
Cc: Rabin Vincent <rabin@rab.in>
Fixes: f3ddb74ad0 ("tracing: Wake up ring buffer waiters on closing of the file")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The "shortest_full" variable is used to keep track of the waiter that is
waiting for the smallest amount on the ring buffer before being woken up.
When a tasks waits on the ring buffer, it passes in a "full" value that is
a percentage. 0 means wake up on any data. 1-100 means wake up from 1% to
100% full buffer.
As all waiters are on the same wait queue, the wake up happens for the
waiter with the smallest percentage.
The problem is that the smallest_full on the cpu_buffer that stores the
smallest amount doesn't get reset when all the waiters are woken up. It
does get reset when the ring buffer is reset (echo > /sys/kernel/tracing/trace).
This means that tasks may be woken up more often then when they want to
be. Instead, have the shortest_full field get reset just before waking up
all the tasks. If the tasks wait again, they will update the shortest_full
before sleeping.
Also add locking around setting of shortest_full in the poll logic, and
change "work" to "rbwork" to match the variable name for rb_irq_work
structures that are used in other places.
Link: https://lore.kernel.org/linux-trace-kernel/20240308202431.948914369@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linke li <lilinke99@qq.com>
Cc: Rabin Vincent <rabin@rab.in>
Fixes: 2c2b0a78b3 ("ring-buffer: Add percentage of ring buffer full to wake up reader")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull kvm fixes from Paolo Bonzini:
"KVM GUEST_MEMFD fixes for 6.8:
- Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY
to avoid creating an inconsistent ABI (KVM_MEM_GUEST_MEMFD is not
writable from userspace, so there would be no way to write to a
read-only guest_memfd).
- Update documentation for KVM_SW_PROTECTED_VM to make it abundantly
clear that such VMs are purely for development and testing.
- Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term
plan is to support confidential VMs with deterministic private
memory (SNP and TDX) only in the TDP MMU.
- Fix a bug in a GUEST_MEMFD dirty logging test that caused false
passes.
x86 fixes:
- Fix missing marking of a guest page as dirty when emulating an
atomic access.
- Check for mmu_notifier invalidation events before faulting in the
pfn, and before acquiring mmu_lock, to avoid unnecessary work and
lock contention with preemptible kernels (including
CONFIG_PREEMPT_DYNAMIC in non-preemptible mode).
- Disable AMD DebugSwap by default, it breaks VMSA signing and will
be re-enabled with a better VM creation API in 6.10.
- Do the cache flush of converted pages in svm_register_enc_region()
before dropping kvm->lock, to avoid a race with unregistering of
the same region and the consequent use-after-free issue"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
SEV: disable SEV-ES DebugSwap by default
KVM: x86/mmu: Retry fault before acquiring mmu_lock if mapping is changing
KVM: SVM: Flush pages under kvm->lock to fix UAF in svm_register_enc_region()
KVM: selftests: Add a testcase to verify GUEST_MEMFD and READONLY are exclusive
KVM: selftests: Create GUEST_MEMFD for relevant invalid flags testcases
KVM: x86/mmu: Restrict KVM_SW_PROTECTED_VM to the TDP MMU
KVM: x86: Update KVM_SW_PROTECTED_VM docs to make it clear they're a WIP
KVM: Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY
KVM: x86: Mark target gfn of emulated atomic instruction as dirty
A task can wait on a ring buffer for when it fills up to a specific
watermark. The writer will check the minimum watermark that waiters are
waiting for and if the ring buffer is past that, it will wake up all the
waiters.
The waiters are in a wait loop, and will first check if a signal is
pending and then check if the ring buffer is at the desired level where it
should break out of the loop.
If a file that uses a ring buffer closes, and there's threads waiting on
the ring buffer, it needs to wake up those threads. To do this, a
"wait_index" was used.
Before entering the wait loop, the waiter will read the wait_index. On
wakeup, it will check if the wait_index is different than when it entered
the loop, and will exit the loop if it is. The waker will only need to
update the wait_index before waking up the waiters.
This had a couple of bugs. One trivial one and one broken by design.
The trivial bug was that the waiter checked the wait_index after the
schedule() call. It had to be checked between the prepare_to_wait() and
the schedule() which it was not.
The main bug is that the first check to set the default wait_index will
always be outside the prepare_to_wait() and the schedule(). That's because
the ring_buffer_wait() doesn't have enough context to know if it should
break out of the loop.
The loop itself is not needed, because all the callers to the
ring_buffer_wait() also has their own loop, as the callers have a better
sense of what the context is to decide whether to break out of the loop
or not.
Just have the ring_buffer_wait() block once, and if it gets woken up, exit
the function and let the callers decide what to do next.
Link: https://lore.kernel.org/all/CAHk-=whs5MdtNjzFkTyaUy=vHi=qwWgPi0JgTe6OYUYMNSRZfg@mail.gmail.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240308202431.792933613@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linke li <lilinke99@qq.com>
Cc: Rabin Vincent <rabin@rab.in>
Fixes: e30f53aad2 ("tracing: Do not busy wait in buffer splice")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull i2c fixes from Wolfram Sang:
"Two patches from Heiner for the i801 are targeting muxes discovered
while working on some other features. Essentially, there is a
reordering when adding optional slaves and proper cleanup upon
registering a mux device.
Christophe fixes the exit path in the wmt driver that was leaving the
clocks hanging, and the last fix from Tommy avoids false error reports
in IRQ"
* tag 'i2c-for-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: aspeed: Fix the dummy irq expected print
i2c: wmt: Fix an error handling path in wmt_i2c_probe()
i2c: i801: Avoid potential double call to gpiod_remove_lookup_table
i2c: i801: Fix using mux_pdev before it's set
Pull firewire fix from Takashi Sakamoto:
"A fix to suppress a warning about unreleased IRQ for 1394 OHCI
hardware when disabling MSI.
In Linux kernel v6.5, a PCI driver for 1394 OHCI hardware was
optimized into the managed device resources. Edmund Raile points out
that the change brings the warning about unreleased IRQ at the call of
pci_disable_msi(), since the API expects that the relevant IRQ has
already been released in advance.
As long as the API is called in .remove callback of PCI device
operation, it is prohibited to maintain the IRQ as the part of managed
device resource. As a workaround, the IRQ is explicitly released at
.remove callback, before the call of pci_disable_msi().
pci_disable_msi() is legacy API nowadays in PCI MSI implementation. I
have a plan to replace it with the modern API in the development for
the future version of Linux kernel. So at present I keep them as is"
* tag 'firewire-fixes-6.8-final' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: ohci: prevent leak of left-over IRQ on unbind
The DebugSwap feature of SEV-ES provides a way for confidential guests to use
data breakpoints. However, because the status of the DebugSwap feature is
recorded in the VMSA, enabling it by default invalidates the attestation
signatures. In 6.10 we will introduce a new API to create SEV VMs that
will allow enabling DebugSwap based on what the user tells KVM to do.
Contextually, we will change the legacy KVM_SEV_ES_INIT API to never
enable DebugSwap.
For compatibility with kernels that pre-date the introduction of DebugSwap,
as well as with those where KVM_SEV_ES_INIT will never enable it, do not enable
the feature by default. If anybody wants to use it, for now they can enable
the sev_es_debug_swap_enabled module parameter, but this will result in a
warning.
Fixes: d1f85fbe83 ("KVM: SEV: Enable data breakpoints in SEV-ES")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM GUEST_MEMFD fixes for 6.8:
- Make KVM_MEM_GUEST_MEMFD mutually exclusive with KVM_MEM_READONLY to
avoid creating ABI that KVM can't sanely support.
- Update documentation for KVM_SW_PROTECTED_VM to make it abundantly
clear that such VMs are purely a development and testing vehicle, and
come with zero guarantees.
- Limit KVM_SW_PROTECTED_VM guests to the TDP MMU, as the long term plan
is to support confidential VMs with deterministic private memory (SNP
and TDX) only in the TDP MMU.
- Fix a bug in a GUEST_MEMFD negative test that resulted in false passes
when verifying that KVM_MEM_GUEST_MEMFD memslots can't be dirty logged.
KVM x86 fixes for 6.8, round 2:
- When emulating an atomic access, mark the gfn as dirty in the memslot
to fix a bug where KVM could fail to mark the slot as dirty during live
migration, ultimately resulting in guest data corruption due to a dirty
page not being re-copied from the source to the target.
- Check for mmu_notifier invalidation events before faulting in the pfn,
and before acquiring mmu_lock, to avoid unnecessary work and lock
contention. Contending mmu_lock is especially problematic on preemptible
kernels, as KVM may yield mmu_lock in response to the contention, which
severely degrades overall performance due to vCPUs making it difficult
for the task that triggered invalidation to make forward progress.
Note, due to another kernel bug, this fix isn't limited to preemtible
kernels, as any kernel built with CONFIG_PREEMPT_DYNAMIC=y will yield
contended rwlocks and spinlocks.
https://lore.kernel.org/all/20240110214723.695930-1-seanjc@google.com
Pull ceph fix from Ilya Dryomov:
"A follow-up for sparse read fixes that went into -rc4 -- msgr2 case
was missed and is corrected here"
* tag 'ceph-for-6.8-rc8' of https://github.com/ceph/ceph-client:
libceph: init the cursor when preparing sparse read in msgr2
Pull char/misc driver fixes from Greg KH:
"Here are a few small char/misc and other driver subsystem fixes for
reported issues that have been in my tree.
Included in here are fixes for:
- iio driver fixes for reported problems
- much reported bugfix for a lis3lv02d_i2c regression
- comedi driver bugfix
- mei new device ids
- mei driver fixes
- counter core fix
All of these have been in linux-next with no reported issues, some for
many weeks"
* tag 'char-misc-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: gsc_proxy: match component when GSC is on different bus
misc: fastrpc: Pass proper arguments to scm call
comedi: comedi_test: Prevent timers rescheduling during deletion
comedi: comedi_8255: Correct error in subdevice initialization
misc: lis3lv02d_i2c: Fix regulators getting en-/dis-abled twice on suspend/resume
iio: accel: adxl367: fix I2C FIFO data register
iio: accel: adxl367: fix DEVID read after reset
iio: pressure: dlhl60d: Initialize empty DLH bytes
iio: imu: inv_mpu6050: fix frequency setting when chip is off
iio: pressure: Fixes BMP38x and BMP390 SPI support
iio: imu: inv_mpu6050: fix FIFO parsing when empty
mei: Add Meteor Lake support for IVSC device
mei: me: add arrow lake point H DID
mei: me: add arrow lake point S DID
counter: fix privdata alignment
Pull tty / serial fixes from Greg KH:
"Here are some small remaining tty/serial driver fixes. Included in
here is fixes for:
- vt unicode buffer corruption fix
- imx serial driver fixes, again
- port suspend fix
- 8250_dw driver fix
- fsl_lpuart driver fix
- revert for the qcom_geni_serial driver to fix a reported regression
All of these have been in linux-next with no reported issues"
* tag 'tty-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "tty: serial: simplify qcom_geni_serial_send_chunk_fifo()"
tty: serial: fsl_lpuart: avoid idle preamble pending if CTS is enabled
vt: fix unicode buffer corruption when deleting characters
serial: port: Don't suspend if the port is still busy
serial: 8250_dw: Do not reclock if already at correct rate
tty: serial: imx: Fix broken RS485
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some small remaining fixes for USB and Thunderbolt drivers.
Included in here are fixes for:
- thunderbold NULL dereference fix
- typec driver fixes
- xhci driver regression fix
- usb-storage divide-by-0 fix
- ncm gadget driver fix
All of these have been in linux-next with no reported issues"
* tag 'usb-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: Fix failure to detect ring expansion need.
usb: port: Don't try to peer unused USB ports based on location
usb: gadget: ncm: Fix handling of zero block length packets
usb: typec: altmodes/displayport: create sysfs nodes as driver's default device attribute group
usb: typec: tpcm: Fix PORT_RESET behavior for self powered devices
usb: typec: ucsi: fix UCSI on SM8550 & SM8650 Qualcomm devices
USB: usb-storage: Prevent divide-by-0 error in isd200_ata_command
thunderbolt: Fix NULL pointer dereference in tb_port_update_credits()
Pull pin control fixes from Linus Walleij:
- Fix the PM suspend callback in the STM32 ST32MP257 driver to properly
support suspend
- Drop an extraneous reference put in the debugfs code, this was
confusing the reference counts and causing unsolicited calls to
__free()
* tag 'pinctrl-v6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: don't put the reference to GPIO device in pinctrl_pins_show()
pinctrl: stm32: fix PM support for stm32mp257
Pull input updates from Dmitry Torokhov:
- a revert of endpoint checks in bcm5974 - the driver is being naughty
and pokes at unclaimed USB interface, so the check fails. We need to
fix the driver to claim both interfaces, and then re-implement the
endpoints check
- a fix to Synaptics RMI driver to avoid UAF on driver unload or device
unbinding
- a few new VID/PIDs added to xpad game controller driver
- a change to gpio_keys_polled driver to quiet it when GPIO causes
probe deferral.
* tag 'input-for-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: synaptics-rmi4 - fix UAF of IRQ domain on driver removal
Input: gpio_keys_polled - suppress deferred probe error for gpio
Revert "Input: bcm5974 - check endpoint type before starting traffic"
Input: xpad - add additional HyperX Controller Identifiers
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. Half of them are HD-audio quirks while
the rest are various device-specific ASoC fixes"
* tag 'sound-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: wm8962: Fix up incorrect error message in wm8962_set_fll
ASoC: wm8962: Enable both SPKOUTR_ENA and SPKOUTL_ENA in mono mode
ASoC: wm8962: Enable oscillator if selecting WM8962_FLL_OSC
ASoC: dt-bindings: nvidia: Fix 'lge' vendor prefix
ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook
ASoC: amd: yc: Add HP Pavilion Aero Laptop 13-be2xxx(8BD6) into DMI quirk table
ASoC: rcar: adg: correct TIMSEL setting for SSI9
ALSA: hda: cs35l41: Overwrite CS35L41 configuration for ASUS UM5302LA
ALSA: hda/realtek: Add quirks for Lenovo Thinkbook 16P laptops
ALSA: hda: cs35l41: Support Lenovo Thinkbook 16P
ALSA: hda/realtek - Add Headset Mic supported Acer NB platform
ALSA: hda: optimize the probe codec process
ALSA: hda/realtek - Fix headset Mic no show at resume back for Lenovo ALC897 platform
ASoC: Intel: bytcr_rt5640: Add an extra entry for the Chuwi Vi8 tablet
ASoC: madera: Fix typo in madera_set_fll_clks shift value
Pull drm fixes from Dave Airlie:
"Regular fixes (two weeks for i915), scattered across drivers, amdgpu
and i915 being the main ones, with nouveau having a couple of fixes.
One patch got applied for udl, but reverted soon after as the
maintainer has missed some crucial prior discussion.
Seems quiet and normal enough for this stage.
MAINTAINERS
- update email address
core:
- fix polling in certain configurations
buddy:
- fix kunit test warning
panel:
- boe-tv101wum-nl6: timing tuning fixes
i915:
- Fix to extract HDCP information from primary connector
- Check for NULL mmu_interval_notifier before removing
- Fix for #10184: Kernel crash on UHD Graphics 730 (Cc stable)
- Fix for #10284: Boot delay regresion with PSR
- Fix DP connector DSC HW state readout
- Selftest fix to convert msecs to jiffies
xe:
- error path fix
amdgpu:
- SMU14 fix
- Fix possible NULL pointer
- VRR fix
- pwm fix
nouveau:
- fix deadlock in new ioctls fail path
- fix missing locking around object rbtree
udl:
- apply and revert format change"
* tag 'drm-fixes-2024-03-08' of https://gitlab.freedesktop.org/drm/kernel: (21 commits)
nouveau: lock the client object tree.
drm/tests/buddy: fix print format
drm/xe: Return immediately on tile_init failure
drm/amdgpu/pm: Fix the error of pwm1_enable setting
drm/amd/display: handle range offsets in VRR ranges
drm/amd/display: check dc_link before dereferencing
drm/amd/swsmu: modify the gfx activity scaling
Revert "drm/udl: Add ARGB8888 as a format"
drm/i915/panelreplay: Move out psr_init_dpcd() from init_connector()
drm/i915/dp: Fix connector DSC HW state readout
drm/i915/selftests: Fix dependency of some timeouts on HZ
drm/udl: Add ARGB8888 as a format
drm/nouveau: fix stale locked mutex in nouveau_gem_ioctl_pushbuf
drm/i915: Don't explode when the dig port we don't have an AUX CH
MAINTAINERS: Update email address for Tvrtko Ursulin
drm/panel: boe-tv101wum-nl6: Fine tune Himax83102-j02 panel HFP and HBP (again)
drm: Fix output poll work for drm_kms_helper_poll=n
drm/i915: Check before removing mm notifier
drm/i915/hdcp: Extract hdcp structure from correct connector
drm/i915/hdcp: Remove additional timing for reading mst hdcp message
...
When the i2c error condition occurred and master state was not
idle, the master irq function will goto complete state without any
other interrupt handling. It would cause dummy irq expected print.
Under this condition, assign the irq_status into irq_handle.
For example, when the abnormal start / stop occurred (bit 5) with
normal stop status (bit 4) at same time. Then the normal stop status
would not be handled and it would cause irq expected print in
the aspeed_i2c_bus_irq.
...
aspeed-i2c-bus x. i2c-bus: irq handled != irq.
Expected 0x00000030, but was 0x00000020
...
Fixes: 3e9efc3299 ("i2c: aspeed: Handle master/slave combined irq events properly")
Cc: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Signed-off-by: Tommy Huang <tommy_huang@aspeedtech.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
wmt_i2c_reset_hardware() calls clk_prepare_enable(). So, should an error
occur after it, it should be undone by a corresponding
clk_disable_unprepare() call, as already done in the remove function.
Fixes: 560746eb79 ("i2c: vt8500: Add support for I2C bus on Wondermedia SoCs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
If registering the platform device fails, the lookup table is
removed in the error path. On module removal we would try to
remove the lookup table again. Fix this by setting priv->lookup
only if registering the platform device was successful.
In addition free the memory allocated for the lookup table in
the error path.
Fixes: d308dfbf62 ("i2c: mux/i801: Switch to use descriptor passing")
Cc: stable@vger.kernel.org
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
i801_probe_optional_slaves() is called before i801_add_mux().
This results in mux_pdev being checked before it's set by
i801_add_mux(). Fix this by changing the order of the calls.
I consider this safe as I see no dependencies.
Fixes: 80e56b86b5 ("i2c: i801: Simplify class-based client device instantiation")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
ASoC: Fixes for v6.8
Some more driver specific fixes for v6.8, plus one new x86 platform
quirk. All good fixes to have if you have systems that use the relevant
hardware.
Pull misc fixes from Andrew Morton:
"6 hotfixes. 4 are cc:stable and the remainder pertain to post-6.7
issues or aren't considered to be needed in earlier kernel versions"
* tag 'mm-hotfixes-stable-2024-03-07-16-17' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
scripts/gdb/symbols: fix invalid escape sequence warning
mailmap: fix Kishon's email
init/Kconfig: lower GCC version check for -Warray-bounds
mm, mmap: fix vma_merge() case 7 with vma_ops->close
mm: userfaultfd: fix unexpected change to src_folio when UFFDIO_MOVE fails
mm, vmscan: prevent infinite loop for costly GFP_NOIO | __GFP_RETRY_MAYFAIL allocations
Calling irq_domain_remove() will lead to freeing the IRQ domain
prematurely. The domain is still referenced and will be attempted to get
used via rmi_free_function_list() -> rmi_unregister_function() ->
irq_dispose_mapping() -> irq_get_irq_data()'s ->domain pointer.
With PaX's MEMORY_SANITIZE this will lead to an access fault when
attempting to dereference embedded pointers, as in Torsten's report that
was faulting on the 'domain->ops->unmap' test.
Fix this by releasing the IRQ domain only after all related IRQs have
been deactivated.
Fixes: 24d28e4f12 ("Input: synaptics-rmi4 - convert irq distribution to irq_domain")
Reported-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20240222142654.856566-1-minipli@grsecurity.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull spi fix from Mark Brown:
"One small fix for the newly added cs42l43 driver which would have
caused it problems working in some system configurations by needlessly
restricting chip select configurations"
* tag 'spi-fix-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: cs42l43: Don't limit native CS to the first chip select
Pull regulator fixes from Mark Brown:
"A couple of small fixes for the rk808 driver, the regulator voltage
configurations were incorrectly described.
The changes are not expected to have practical impact but given that
we're dealing with power it's generally better to follow the hardware
specification as closely as we can to avoid unexpected stresses"
* tag 'regulator-fix-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: rk808: fix LDO range on RK806
regulator: rk808: fix buck range on RK806
Pull arm64 fix from Will Deacon:
"A lonely arm64 fix addressing a kprobes regression that we introduced
during the merge window:
- Fix recursive kprobes regression when probing the stack unwinder"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: prohibit probing on arch_kunwind_consume_entry()
Pull erofs fixes from Gao Xiang:
"The main one is a KMSAN fix which addresses an issue introduced in
this cycle so it'd be much better to fix before releasing, and the
remaining one fixes VMA alignment for THP.
Summary:
- Fix a KMSAN uninit-value issue triggered by a crafted image
- Fix VMA alignment for memory mapped files on THP"
* tag 'erofs-for-6.8-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: apply proper VMA alignment for memory mapped files on THP
erofs: fix uninitialized page cache reported by KMSAN
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf, ipsec and netfilter.
No solution yet for the stmmac issue mentioned in the last PR, but it
proved to be a lockdep false positive, not a blocker.
Current release - regressions:
- dpll: move all dpll<>netdev helpers to dpll code, fix build
regression with old compilers
Current release - new code bugs:
- page_pool: fix netlink dump stop/resume
Previous releases - regressions:
- bpf: fix verifier to check bpf_func_state->callback_depth when
pruning states as otherwise unsafe programs could get accepted
- ipv6: avoid possible UAF in ip6_route_mpath_notify()
- ice: reconfig host after changing MSI-X on VF
- mlx5:
- e-switch, change flow rule destination checking
- add a memory barrier to prevent a possible null-ptr-deref
- switch to using _bh variant of of spinlock where needed
Previous releases - always broken:
- netfilter: nf_conntrack_h323: add protection for bmp length out of
range
- bpf: fix to zero-initialise xdp_rxq_info struct before running XDP
program in CPU map which led to random xdp_md fields
- xfrm: fix UDP encapsulation in TX packet offload
- netrom: fix data-races around sysctls
- ice:
- fix potential NULL pointer dereference in ice_bridge_setlink()
- fix uninitialized dplls mutex usage
- igc: avoid returning frame twice in XDP_REDIRECT
- i40e: disable NAPI right after disabling irqs when handling
xsk_pool
- geneve: make sure to pull inner header in geneve_rx()
- sparx5: fix use after free inside sparx5_del_mact_entry
- dsa: microchip: fix register write order in ksz8_ind_write8()
Misc:
- selftests: mptcp: fixes for diag.sh"
* tag 'net-6.8-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
net: pds_core: Fix possible double free in error handling path
netrom: Fix data-races around sysctl_net_busy_read
netrom: Fix a data-race around sysctl_netrom_link_fails_count
netrom: Fix a data-race around sysctl_netrom_routing_control
netrom: Fix a data-race around sysctl_netrom_transport_no_activity_timeout
netrom: Fix a data-race around sysctl_netrom_transport_requested_window_size
netrom: Fix a data-race around sysctl_netrom_transport_busy_delay
netrom: Fix a data-race around sysctl_netrom_transport_acknowledge_delay
netrom: Fix a data-race around sysctl_netrom_transport_maximum_tries
netrom: Fix a data-race around sysctl_netrom_transport_timeout
netrom: Fix data-races around sysctl_netrom_network_ttl_initialiser
netrom: Fix a data-race around sysctl_netrom_obsolescence_count_initialiser
netrom: Fix a data-race around sysctl_netrom_default_path_quality
netfilter: nf_conntrack_h323: Add protection for bmp length out of range
netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout
netfilter: nft_ct: fix l3num expectations with inet pseudo family
netfilter: nf_tables: reject constant set with timeout
netfilter: nf_tables: disallow anonymous set with timeout flag
net/rds: fix WARNING in rds_conn_connect_if_down
net: dsa: microchip: fix register write order in ksz8_ind_write8()
...
When auxiliary_device_add() returns error and then calls
auxiliary_device_uninit(), Callback function pdsc_auxbus_dev_release
calls kfree(padev) to free memory. We shouldn't call kfree(padev)
again in the error handling path.
Fix this by cleaning up the redundant kfree() and putting
the error handling back to where the errors happened.
Fixes: 4569cce43b ("pds_core: add auxiliary_bus devices")
Signed-off-by: Yongzhi Liu <hyperlyzcs@gmail.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Link: https://lore.kernel.org/r/20240306105714.20597-1-hyperlyzcs@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains fixes for net:
Patch #1 disallows anonymous sets with timeout, except for dynamic sets.
Anonymous sets with timeouts using the pipapo set backend makes
no sense from userspace perspective.
Patch #2 rejects constant sets with timeout which has no practical usecase.
This kind of set, once bound, contains elements that expire but
no new elements can be added.
Patch #3 restores custom conntrack expectations with NFPROTO_INET,
from Florian Westphal.
Patch #4 marks rhashtable anonymous set with timeout as dead from the
commit path to avoid that async GC collects these elements. Rules
that refers to the anonymous set get released with no mutex held
from the commit path.
Patch #5 fixes a UBSAN shift overflow in H.323 conntrack helper,
from Lena Wang.
netfilter pull request 24-03-07
* tag 'nf-24-03-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_conntrack_h323: Add protection for bmp length out of range
netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout
netfilter: nft_ct: fix l3num expectations with inet pseudo family
netfilter: nf_tables: reject constant set with timeout
netfilter: nf_tables: disallow anonymous set with timeout flag
====================
Link: https://lore.kernel.org/r/20240307021545.149386-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jason Xing says:
====================
netrom: Fix all the data-races around sysctls
As the title said, in this patchset I fix the data-race issues because
the writer and the reader can manipulate the same value concurrently.
====================
Link: https://lore.kernel.org/r/20240304082046.64977-1-kerneljasonxing@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We need to protect the reader reading the sysctl value because the
value can be changed concurrently.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We need to protect the reader reading the sysctl value because the
value can be changed concurrently.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We need to protect the reader reading the sysctl value because the
value can be changed concurrently.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We need to protect the reader reading the sysctl value because the
value can be changed concurrently.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We need to protect the reader reading the sysctl value because the
value can be changed concurrently.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We need to protect the reader reading the sysctl value because the
value can be changed concurrently.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We need to protect the reader reading the sysctl value because the
value can be changed concurrently.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We need to protect the reader reading the sysctl value because the
value can be changed concurrently.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We need to protect the reader reading the sysctl value because the
value can be changed concurrently.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We need to protect the reader reading the sysctl value because the
value can be changed concurrently.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We need to protect the reader reading the sysctl value
because the value can be changed concurrently.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We need to protect the reader reading sysctl_netrom_default_path_quality
because the value can be changed concurrently.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Steffen Klassert says:
====================
pull request (net): ipsec 2024-03-06
1) Clear the ECN bits flowi4_tos in decode_session4().
This was already fixed but the bug was reintroduced
when decode_session4() switched to us the flow dissector.
From Guillaume Nault.
2) Fix UDP encapsulation in the TX path with packet offload mode.
From Leon Romanovsky,
3) Avoid clang fortify warning in copy_to_user_tmpl().
From Nathan Chancellor.
4) Fix inter address family tunnel in packet offload mode.
From Mike Yu.
* tag 'ipsec-2024-03-06' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: set skb control buffer based on packet offload as well
xfrm: fix xfrm child route lookup for packet offload
xfrm: Avoid clang fortify warning in copy_to_user_tmpl()
xfrm: Pass UDP encapsulation in TX packet offload
xfrm: Clear low order bits of ->flowi4_tos in decode_session4().
====================
Link: https://lore.kernel.org/r/20240306100438.3953516-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2024-03-06
We've added 5 non-merge commits during the last 1 day(s) which contain
a total of 5 files changed, 77 insertions(+), 4 deletions(-).
The main changes are:
1) Fix BPF verifier to check bpf_func_state->callback_depth when pruning
states as otherwise unsafe programs could get accepted,
from Eduard Zingerman.
2) Fix to zero-initialise xdp_rxq_info struct before running XDP program in
CPU map which led to random xdp_md fields, from Toke Høiland-Jørgensen.
3) Fix bonding XDP feature flags calculation when bonding device has no
slave devices anymore, from Daniel Borkmann.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
cpumap: Zero-initialise xdp_rxq_info struct before running XDP program
selftests/bpf: Fix up xdp bonding test wrt feature flags
xdp, bonding: Fix feature flags when there are no slave devs anymore
selftests/bpf: test case for callback_depth states pruning logic
bpf: check bpf_func_state->callback_depth when pruning states
====================
Link: https://lore.kernel.org/r/20240306220309.13534-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are mainly two reasons that thp_get_unmapped_area() should be
used for EROFS as other filesystems:
- It's needed to enable PMD mappings as a FSDAX filesystem, see
commit 74d2fad133 ("thp, dax: add thp_get_unmapped_area for pmd
mappings");
- It's useful together with large folios and
CONFIG_READ_ONLY_THP_FOR_FS which enable THPs for mmapped files
(e.g. shared libraries) even without FSDAX. See commit 1854bc6e24
("mm/readahead: Align file mappings for non-DAX").
Fixes: 06252e9ce0 ("erofs: dax support for non-tailpacking regular file")
Fixes: ce529cc25b ("erofs: enable large folios for iomap mode")
Fixes: e6687b8922 ("erofs: enable large folios for fscache mode")
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240306053138.2240206-1-hsiangkao@linux.alibaba.com
UBSAN load reports an exception of BRK#5515 SHIFT_ISSUE:Bitwise shifts
that are out of bounds for their data type.
vmlinux get_bitmap(b=75) + 712
<net/netfilter/nf_conntrack_h323_asn1.c:0>
vmlinux decode_seq(bs=0xFFFFFFD008037000, f=0xFFFFFFD008037018, level=134443100) + 1956
<net/netfilter/nf_conntrack_h323_asn1.c:592>
vmlinux decode_choice(base=0xFFFFFFD0080370F0, level=23843636) + 1216
<net/netfilter/nf_conntrack_h323_asn1.c:814>
vmlinux decode_seq(f=0xFFFFFFD0080371A8, level=134443500) + 812
<net/netfilter/nf_conntrack_h323_asn1.c:576>
vmlinux decode_choice(base=0xFFFFFFD008037280, level=0) + 1216
<net/netfilter/nf_conntrack_h323_asn1.c:814>
vmlinux DecodeRasMessage() + 304
<net/netfilter/nf_conntrack_h323_asn1.c:833>
vmlinux ras_help() + 684
<net/netfilter/nf_conntrack_h323_main.c:1728>
vmlinux nf_confirm() + 188
<net/netfilter/nf_conntrack_proto.c:137>
Due to abnormal data in skb->data, the extension bitmap length
exceeds 32 when decoding ras message then uses the length to make
a shift operation. It will change into negative after several loop.
UBSAN load could detect a negative shift as an undefined behaviour
and reports exception.
So we add the protection to avoid the length exceeding 32. Or else
it will return out of range error and stop decoding.
Fixes: 5e35941d99 ("[NETFILTER]: Add H.323 conntrack/NAT helper")
Signed-off-by: Lena Wang <lena.wang@mediatek.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
While the rhashtable set gc runs asynchronously, a race allows it to
collect elements from anonymous sets with timeouts while it is being
released from the commit path.
Mingi Cho originally reported this issue in a different path in 6.1.x
with a pipapo set with low timeouts which is not possible upstream since
7395dfacff ("netfilter: nf_tables: use timestamp to check for set
element timeout").
Fix this by setting on the dead flag for anonymous sets to skip async gc
in this case.
According to 08e4c8c591 ("netfilter: nf_tables: mark newset as dead on
transaction abort"), Florian plans to accelerate abort path by releasing
objects via workqueue, therefore, this sets on the dead flag for abort
path too.
Cc: stable@vger.kernel.org
Fixes: 5f68718b34 ("netfilter: nf_tables: GC transaction API to avoid race with control plane")
Reported-by: Mingi Cho <mgcho.minic@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Following is rejected but should be allowed:
table inet t {
ct expectation exp1 {
[..]
l3proto ip
Valid combos are:
table ip t, l3proto ip
table ip6 t, l3proto ip6
table inet t, l3proto ip OR l3proto ip6
Disallow inet pseudeo family, the l3num must be a on-wire protocol known
to conntrack.
Retain NFPROTO_INET case to make it clear its rejected
intentionally rather as oversight.
Fixes: 8059918a13 ("netfilter: nft_ct: sanitize layer 3 and 4 protocol number in custom expectations")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This set combination is weird: it allows for elements to be
added/deleted, but once bound to the rule it cannot be updated anymore.
Eventually, all elements expire, leading to an empty set which cannot
be updated anymore. Reject this flags combination.
Cc: stable@vger.kernel.org
Fixes: 761da2935d ("netfilter: nf_tables: add set timeout API support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Anonymous sets are never used with timeout from userspace, reject this.
Exception to this rule is NFT_SET_EVAL to ensure legacy meters still work.
Cc: stable@vger.kernel.org
Fixes: 761da2935d ("netfilter: nf_tables: add set timeout API support")
Reported-by: lonial con <kongln9170@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Limit the max print event of trace_marker to just 4K string size. This must
also be less than the amount that can be held by a trace_seq along with
the text that is before the output (like the task name, PID, CPU, state,
etc). As trace_seq is made to handle large events (some greater than 4K).
Make the max size of a trace_marker write event be 4K which is guaranteed
to fit in the trace_seq buffer.
Link: https://lore.kernel.org/linux-trace-kernel/20240304223433.4ba47dff@gandalf.local.home
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The trace_seq buffer is used to print out entire events. It's typically
set to PAGE_SIZE * 2 as there's some events that can be quite large.
As a side effect, writes to trace_marker is limited by both the size of the
trace_seq buffer as well as the ring buffer's sub-buffer size (which is a
power of PAGE_SIZE). By limiting the trace_seq size, it also limits the
size of the largest string written to trace_marker.
trace_seq does not need to be dependent on PAGE_SIZE like the ring buffer
sub-buffers need to be. Hard code it to 8K which is PAGE_SIZE * 2 on most
architectures. This will also limit the size of trace_marker on those
architectures with greater than 4K PAGE_SIZE.
Link: https://lore.kernel.org/all/20240302111244.3a1674be@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20240304191342.56fb1087@gandalf.local.home
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sachin Sant <sachinp@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
As the chip selects can be configured through ACPI/OF/swnode, and
the set_cs() callback will only be called when a native chip select
is being used, there is no reason for the driver to only support the
native chip select as the first chip select. Remove the check that
introduces this limitation.
Fixes: ef75e76716 ("spi: cs42l43: Add SPI controller support")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://msgid.link/r/20240306161004.2205113-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull vfs fixes from Christian Brauner:
- Get rid of copy_mc flag in iov_iter which really only makes sense for
the core dumping code so move it out of the generic iov iter code and
make it coredump's problem. See the detailed commit description.
- Revert fs/aio: Make io_cancel() generate completions again
The initial fix here was predicated on the assumption that calling
ki_cancel() didn't complete aio requests. However, that turned out to
be wrong since the two drivers that actually make use of this set a
cancellation function that performs the cancellation correctly. So
revert this change.
- Ensure that the test for IOCB_AIO_RW always happens before the read
from ki_ctx.
* tag 'vfs-6.8-release.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iov_iter: get rid of 'copy_mc' flag
fs/aio: Check IOCB_AIO_RW before the struct aio_kiocb conversion
Revert "fs/aio: Make io_cancel() generate completions again"
Pull ARM SoC fixes from Arnd Bergmann:
"These should be the final fixes for the soc tree for 6.8, as usual
they mostly deal wtih dts files:
- Qualcomm fixes for pcie4 on sc8280xp, a revert of msm8996 mpm
support, sm6115 interconnect and sm8650 gpio.
- Two fixes for Tegra234 ethernet
- A Makefile fix to actually build the allwinner based orange pi zero
2w device tree
- Fixes for clocks and reset on imx8mp and a DSI display regression
on imx7.
The non-DT fixes are:
- Firmware fixes addressing a kernel panic in op-tee and a minor
regression in microchip/riscv.
- A defconfig change to bring back backlight support after a Kconfig
change"
* tag 'arm-fixes-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firmware: microchip: Fix over-requested allocation size
tee: optee: Fix kernel panic caused by incorrect error handling
Revert "arm64: dts: qcom: msm8996: Hook up MPM"
arm64: dts: qcom: sc8280xp-x13s: limit pcie4 link speed
arm64: dts: qcom: sc8280xp-crd: limit pcie4 link speed
arm64: dts: imx8mp: Fix LDB clocks property
arm64: dts: imx8mp: Fix TC9595 reset GPIO on DH i.MX8M Plus DHCOM SoM
MAINTAINERS: Use a proper mailinglist for NXP i.MX development
ARM: dts: imx7: remove DSI port endpoints
arm64: dts: allwinner: h616: Add Orange Pi Zero 2W to Makefile
ARM: imx_v6_v7_defconfig: Restore CONFIG_BACKLIGHT_CLASS_DEVICE
arm64: tegra: Fix Tegra234 MGBE power-domains
arm64: tegra: Set the correct PHY mode for MGBE
arm64: dts: qcom: sm6115: Fix missing interconnect-names
arm64: dts: qcom: sm8650-mtp: add gpio74 as reserved gpio
arm64: dts: qcom: sm8650-qrd: add gpio74 as reserved gpio
Pull crypto fixes from Herbert Xu:
"Fix potential use-after-frees in rk3288 and sun8i-ce"
* tag 'v6.8-p6' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: rk3288 - Fix use after free in unprepare
crypto: sun8i-ce - Fix use after free in unprepare
Due to a long-standing issue in driver core, drivers may not probe defer
after having registered child devices to avoid triggering a probe
deferral loop (see fbc35b45f9 ("Add documentation on meaning of
-EPROBE_DEFER")).
Move registration of the typec switch to after looking up clocks and
other resources.
Note that PHY creation can in theory also trigger a probe deferral when
a 'phy' supply is used. This does not seem to affect the QMP PHY driver
but the PHY subsystem should be reworked to address this (i.e. by
separating initialisation and registration of the PHY).
Fixes: 2851117f8f ("phy: qcom-qmp-combo: Introduce orientation switching")
Cc: stable@vger.kernel.org # 6.5
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240217150228.5788-7-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Due to a long-standing issue in driver core, drivers may not probe defer
after having registered child devices to avoid triggering a probe
deferral loop (see fbc35b45f9 ("Add documentation on meaning of
-EPROBE_DEFER")).
This could potentially also trigger a bug in the DRM bridge
implementation which does not expect bridges to go away even if device
links may avoid triggering this (when enabled).
Move registration of the DRM aux bridge to after looking up clocks and
other resources.
Note that PHY creation can in theory also trigger a probe deferral when
a 'phy' supply is used. This does not seem to affect the QMP PHY driver
but the PHY subsystem should be reworked to address this (i.e. by
separating initialisation and registration of the PHY).
Fixes: 35921910bb ("phy: qcom: qmp-combo: switch to DRM_AUX_BRIDGE")
Fixes: 1904c3f578 ("phy: qcom-qmp-combo: Introduce drm_bridge")
Cc: stable@vger.kernel.org # 6.5
Cc: Bjorn Andersson <quic_bjorande@quicinc.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240217150228.5788-6-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Commit 5a95f1ded2 ("firewire: ohci: use devres for requested IRQ")
also removed the call to free_irq() in pci_remove(), leading to a
leftover irq of devm_request_irq() at pci_disable_msi() in pci_remove()
when unbinding the driver from the device
remove_proc_entry: removing non-empty directory 'irq/136', leaking at
least 'firewire_ohci'
Call Trace:
? remove_proc_entry+0x19c/0x1c0
? __warn+0x81/0x130
? remove_proc_entry+0x19c/0x1c0
? report_bug+0x171/0x1a0
? console_unlock+0x78/0x120
? handle_bug+0x3c/0x80
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? remove_proc_entry+0x19c/0x1c0
unregister_irq_proc+0xf4/0x120
free_desc+0x3d/0xe0
? kfree+0x29f/0x2f0
irq_free_descs+0x47/0x70
msi_domain_free_locked.part.0+0x19d/0x1d0
msi_domain_free_irqs_all_locked+0x81/0xc0
pci_free_msi_irqs+0x12/0x40
pci_disable_msi+0x4c/0x60
pci_remove+0x9d/0xc0 [firewire_ohci
01b483699bebf9cb07a3d69df0aa2bee71db1b26]
pci_device_remove+0x37/0xa0
device_release_driver_internal+0x19f/0x200
unbind_store+0xa1/0xb0
remove irq with devm_free_irq() before pci_disable_msi()
also remove it in fail_msi: of pci_probe() as this would lead to
an identical leak
Cc: stable@vger.kernel.org
Fixes: 5a95f1ded2 ("firewire: ohci: use devres for requested IRQ")
Signed-off-by: Edmund Raile <edmund.raile@proton.me>
Link: https://lore.kernel.org/r/20240229144723.13047-2-edmund.raile@proton.me
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Third argument of i915_request_wait() accepts a timeout value in jiffies.
Most users pass either a simple HZ based expression, or a result of
msecs_to_jiffies(), or MAX_SCHEDULE_TIMEOUT, or a very small number not
exceeding 4 if applicable as that value. However, there is one user --
intel_selftest_wait_for_rq() -- that passes a WAIT_FOR_RESET_TIME symbol,
defined as a large constant value that most probably represents a desired
timeout in ms. While that usage results in the intended value of timeout
on usual x86_64 kernel configurations, it is not portable across different
architectures and custom kernel configs.
Rename the symbol to clearly indicate intended units and convert it to
jiffies before use.
Fixes: 3a4bfa091c ("drm/i915/selftest: Fix workarounds selftest for GuC submission")
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Cc: Rahul Kumar Singh <rahul.kumar.singh@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222113347.648945-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 6ee3f54b88)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The cursor is no longer initialized in the OSD client, causing the
sparse read state machine to fall into an infinite loop. The cursor
should be initialized in IN_S_PREPARE_SPARSE_DATA state.
[ idryomov: use msg instead of con->in_msg, changelog ]
Link: https://tracker.ceph.com/issues/64607
Fixes: 8e46a2d068 ("libceph: just wait for more data to be available on the socket")
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-03-05 (idpf, ice, i40e, igc, e1000e)
This series contains updates to idpf, ice, i40e, igc and e1000e drivers.
Emil disables local BH on NAPI schedule for proper handling of softirqs
on idpf.
Jake stops reporting of virtchannel RSS option which in unsupported on
ice.
Rand Deeb adds null check to prevent possible null pointer dereference
on ice.
Michal Schmidt moves DPLL mutex initialization to resolve uninitialized
mutex usage for ice.
Jesse fixes incorrect variable usage for calculating Tx stats on ice.
Ivan Vecera corrects logic for firmware equals check on i40e.
Florian Kauer prevents memory corruption for XDP_REDIRECT on igc.
Sasha reverts an incorrect use of FIELD_GET which caused a regression
for Wake on LAN on e1000e.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This flag is only set by one single user: the magical core dumping code
that looks up user pages one by one, and then writes them out using
their kernel addresses (by using a BVEC_ITER).
That actually ends up being a huge problem, because while we do use
copy_mc_to_kernel() for this case and it is able to handle the possible
machine checks involved, nothing else is really ready to handle the
failures caused by the machine check.
In particular, as reported by Tong Tiangen, we don't actually support
fault_in_iov_iter_readable() on a machine check area.
As a result, the usual logic for writing things to a file under a
filesystem lock, which involves doing a copy with page faults disabled
and then if that fails trying to fault pages in without holding the
locks with fault_in_iov_iter_readable() does not work at all.
We could decide to always just make the MC copy "succeed" (and filling
the destination with zeroes), and that would then create a core dump
file that just ignores any machine checks.
But honestly, this single special case has been problematic before, and
means that all the normal iov_iter code ends up slightly more complex
and slower.
See for example commit c9eec08bac ("iov_iter: Don't deal with
iter->copy_mc in memcpy_from_iter_mc()") where David Howells
re-organized the code just to avoid having to check the 'copy_mc' flags
inside the inner iov_iter loops.
So considering that we have exactly one user, and that one user is a
non-critical special case that doesn't actually ever trigger in real
life (Tong found this with manual error injection), the sane solution is
to just decide that the onus on handling the machine check lines on that
user instead.
Ergo, do the copy_mc_to_kernel() in the core dump logic itself, copying
the user data to a stable kernel page before writing it out.
Fixes: f1982740f5 ("iov_iter: Convert iterate*() to inline funcs")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Link: https://lore.kernel.org/r/20240305133336.3804360-1-tongtiangen@huawei.com
Link: https://lore.kernel.org/all/4e80924d-9c85-f13a-722a-6a5d2b1c225a@huawei.com/
Tested-by: David Howells <dhowells@redhat.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reported-by: Tong Tiangen <tongtiangen@huawei.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Mike Yu says:
====================
In the XFRM stack, whether a packet is forwarded to the IPv4
or IPv6 stack depends on the family field of the matched SA.
This does not completely work for IPsec packet offload in some
scenario, for example, sending an IPv6 packet that will be
encrypted and encapsulated as an IPv4 packet in HW.
Here are the patches to make IPsec packet offload work on the
mentioned scenario.
====================
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
A few more Qualcomm Arm64 DeviceTree fixes for v6.8
This reduces the link speed of the PCIe bus with WiFi-card connected on the
Lenovo ThinkPad X13s and the Qualcomm Compute Reference Device, avoid
link errors and initialization issues reported by users.
It also reverts the enablement of MPM on MSM8996, which is reported to
prevent boards on this platform from booting for some users.
* tag 'qcom-arm64-fixes-for-6.8-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
Revert "arm64: dts: qcom: msm8996: Hook up MPM"
arm64: dts: qcom: sc8280xp-x13s: limit pcie4 link speed
arm64: dts: qcom: sc8280xp-crd: limit pcie4 link speed
Link: https://lore.kernel.org/r/20240306031208.4218-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This bug was noticed while re-implementing parts of the kernel
driver in userspace using spidev. The goal was to enable some
of the errata workarounds that Microchip describes in their
errata sheet [1].
Both the errata sheet and the regular datasheet of e.g. the KSZ8795
imply that you need to do this for indirect register accesses:
- write a 16-bit value to a control register pair (this value
consists of the indirect register table, and the offset inside
the table)
- either read or write an 8-bit value from the data storage
register (indicated by REG_IND_BYTE in the kernel)
The current implementation has the order swapped. It can be
proven, by reading back some indirect register with known content
(the EEE register modified in ksz8_handle_global_errata() is one of
these), that this implementation does not work.
Private discussion with Oleksij Rempel of Pengutronix has revealed
that the workaround was apparantly never tested on actual hardware.
[1] https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/Errata/KSZ87xx-Errata-DS80000687C.pdf
Signed-off-by: Tobias Jakobi (Compleo) <tobias.jakobi.compleo@gmail.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Fixes: 7b6e6235b6 ("net: dsa: microchip: ksz8795: handle eee specif erratum")
Link: https://lore.kernel.org/r/20240304154135.161332-1-tobias.jakobi.compleo@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Older versions of GCC really want to know the full definition
of the type involved in rcu_assign_pointer().
struct dpll_pin is defined in a local header, net/core can't
reach it. Move all the netdev <> dpll code into dpll, where
the type is known. Otherwise we'd need multiple function calls
to jump between the compilation units.
This is the same problem the commit under fixes was trying to address,
but with rcu_assign_pointer() not rcu_dereference().
Some of the exports are not needed, networking core can't
be a module, we only need exports for the helpers used by
drivers.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/all/35a869c8-52e8-177-1d4d-e57578b99b6@linux-m68k.org/
Fixes: 640f41ed33 ("dpll: fix build failure due to rcu_dereference_check() on unknown type")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240305013532.694866-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When running an XDP program that is attached to a cpumap entry, we don't
initialise the xdp_rxq_info data structure being used in the xdp_buff
that backs the XDP program invocation. Tobias noticed that this leads to
random values being returned as the xdp_md->rx_queue_index value for XDP
programs running in a cpumap.
This means we're basically returning the contents of the uninitialised
memory, which is bad. Fix this by zero-initialising the rxq data
structure before running the XDP program.
Fixes: 9216477449 ("bpf: cpumap: Add the possibility to attach an eBPF program to cpumap")
Reported-by: Tobias Böhm <tobias@aibor.de>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20240305213132.11955-1-toke@redhat.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Commit 9b0ed890ac ("bonding: do not report NETDEV_XDP_ACT_XSK_ZEROCOPY")
changed the driver from reporting everything as supported before a device
was bonded into having the driver report that no XDP feature is supported
until a real device is bonded as it seems to be more truthful given
eventually real underlying devices decide what XDP features are supported.
The change however did not take into account when all slave devices get
removed from the bond device. In this case after 9b0ed890ac, the driver
keeps reporting a feature mask of 0x77, that is, NETDEV_XDP_ACT_MASK &
~NETDEV_XDP_ACT_XSK_ZEROCOPY whereas it should have reported a feature
mask of 0.
Fix it by resetting XDP feature flags in the same way as if no XDP program
is attached to the bond device. This was uncovered by the XDP bond selftest
which let BPF CI fail. After adjusting the starting masks on the latter
to 0 instead of NETDEV_XDP_ACT_MASK the test passes again together with
this fix.
Fixes: 9b0ed890ac ("bonding: do not report NETDEV_XDP_ACT_XSK_ZEROCOPY")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Magnus Karlsson <magnus.karlsson@intel.com>
Cc: Prashant Batra <prbatra.mail@gmail.com>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Message-ID: <20240305090829.17131-1-daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Eduard Zingerman says:
====================
check bpf_func_state->callback_depth when pruning states
This patch-set fixes bug in states pruning logic hit in mailing list
discussion [0]. The details of the fix are in patch #1.
The main idea for the fix belongs to Yonghong Song,
mine contribution is merely in review and test cases.
There are some changes in verification performance:
File Program Insns (DIFF) States (DIFF)
------------------------- ------------- --------------- --------------
pyperf600_bpf_loop.bpf.o on_event +15 (+0.42%) +0 (+0.00%)
strobemeta_bpf_loop.bpf.o on_event +857 (+37.95%) +60 (+38.96%)
xdp_synproxy_kern.bpf.o syncookie_tc +2892 (+30.39%) +109 (+36.33%)
xdp_synproxy_kern.bpf.o syncookie_xdp +2892 (+30.01%) +109 (+36.09%)
(when tested on a subset of selftests identified by
selftests/bpf/veristat.cfg and Cilium bpf object files from [4])
Changelog:
v2 [2] -> v3:
- fixes for verifier.c commit message as suggested by Yonghong;
- patch-set re-rerouted to 'bpf' tree as suggested in [2];
- patch for test_tcp_custom_syncookie is sent separately to 'bpf-next' [3].
- veristat results updated using 'bpf' tree as baseline and clang 16.
v1 [1] -> v2:
- patch #2 commit message updated to better reflect verifier behavior
with regards to checkpoints tree (suggested by Yonghong);
- veristat results added (suggested by Andrii).
[0] https://lore.kernel.org/bpf/9b251840-7cb8-4d17-bd23-1fc8071d8eef@linux.dev/
[1] https://lore.kernel.org/bpf/20240212143832.28838-1-eddyz87@gmail.com/
[2] https://lore.kernel.org/bpf/20240216150334.31937-1-eddyz87@gmail.com/
[3] https://lore.kernel.org/bpf/20240222150300.14909-1-eddyz87@gmail.com/
[4] https://github.com/anakryiko/cilium
====================
Link: https://lore.kernel.org/r/20240222154121.6991-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test case was minimized from mailing list discussion [0].
It is equivalent to the following C program:
struct iter_limit_bug_ctx { __u64 a; __u64 b; __u64 c; };
static __naked void iter_limit_bug_cb(void)
{
switch (bpf_get_prandom_u32()) {
case 1: ctx->a = 42; break;
case 2: ctx->b = 42; break;
default: ctx->c = 42; break;
}
}
int iter_limit_bug(struct __sk_buff *skb)
{
struct iter_limit_bug_ctx ctx = { 7, 7, 7 };
bpf_loop(2, iter_limit_bug_cb, &ctx, 0);
if (ctx.a == 42 && ctx.b == 42 && ctx.c == 7)
asm volatile("r1 /= 0;":::"r1");
return 0;
}
The main idea is that each loop iteration changes one of the state
variables in a non-deterministic manner. Hence it is premature to
prune the states that have two iterations left comparing them to
states with one iteration left.
E.g. {{7,7,7}, callback_depth=0} can reach state {42,42,7},
while {{7,7,7}, callback_depth=1} can't.
[0] https://lore.kernel.org/bpf/9b251840-7cb8-4d17-bd23-1fc8071d8eef@linux.dev/
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20240222154121.6991-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When comparing current and cached states verifier should consider
bpf_func_state->callback_depth. Current state cannot be pruned against
cached state, when current states has more iterations left compared to
cached state. Current state has more iterations left when it's
callback_depth is smaller.
Below is an example illustrating this bug, minimized from mailing list
discussion [0] (assume that BPF_F_TEST_STATE_FREQ is set).
The example is not a safe program: if loop_cb point (1) is followed by
loop_cb point (2), then division by zero is possible at point (4).
struct ctx {
__u64 a;
__u64 b;
__u64 c;
};
static void loop_cb(int i, struct ctx *ctx)
{
/* assume that generated code is "fallthrough-first":
* if ... == 1 goto
* if ... == 2 goto
* <default>
*/
switch (bpf_get_prandom_u32()) {
case 1: /* 1 */ ctx->a = 42; return 0; break;
case 2: /* 2 */ ctx->b = 42; return 0; break;
default: /* 3 */ ctx->c = 42; return 0; break;
}
}
SEC("tc")
__failure
__flag(BPF_F_TEST_STATE_FREQ)
int test(struct __sk_buff *skb)
{
struct ctx ctx = { 7, 7, 7 };
bpf_loop(2, loop_cb, &ctx, 0); /* 0 */
/* assume generated checks are in-order: .a first */
if (ctx.a == 42 && ctx.b == 42 && ctx.c == 7)
asm volatile("r0 /= 0;":::"r0"); /* 4 */
return 0;
}
Prior to this commit verifier built the following checkpoint tree for
this example:
.------------------------------------- Checkpoint / State name
| .-------------------------------- Code point number
| | .---------------------------- Stack state {ctx.a,ctx.b,ctx.c}
| | | .------------------- Callback depth in frame #0
v v v v
- (0) {7P,7P,7},depth=0
- (3) {7P,7P,7},depth=1
- (0) {7P,7P,42},depth=1
- (3) {7P,7,42},depth=2
- (0) {7P,7,42},depth=2 loop terminates because of depth limit
- (4) {7P,7,42},depth=0 predicted false, ctx.a marked precise
- (6) exit
(a) - (2) {7P,7,42},depth=2
- (0) {7P,42,42},depth=2 loop terminates because of depth limit
- (4) {7P,42,42},depth=0 predicted false, ctx.a marked precise
- (6) exit
(b) - (1) {7P,7P,42},depth=2
- (0) {42P,7P,42},depth=2 loop terminates because of depth limit
- (4) {42P,7P,42},depth=0 predicted false, ctx.{a,b} marked precise
- (6) exit
- (2) {7P,7,7},depth=1 considered safe, pruned using checkpoint (a)
(c) - (1) {7P,7P,7},depth=1 considered safe, pruned using checkpoint (b)
Here checkpoint (b) has callback_depth of 2, meaning that it would
never reach state {42,42,7}.
While checkpoint (c) has callback_depth of 1, and thus
could yet explore the state {42,42,7} if not pruned prematurely.
This commit makes forbids such premature pruning,
allowing verifier to explore states sub-tree starting at (c):
(c) - (1) {7,7,7P},depth=1
- (0) {42P,7,7P},depth=1
...
- (2) {42,7,7},depth=2
- (0) {42,42,7},depth=2 loop terminates because of depth limit
- (4) {42,42,7},depth=0 predicted true, ctx.{a,b,c} marked precise
- (5) division by zero
[0] https://lore.kernel.org/bpf/9b251840-7cb8-4d17-bd23-1fc8071d8eef@linux.dev/
Fixes: bb124da69c ("bpf: keep track of max number of bpf_loop callback iterations")
Suggested-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240222154121.6991-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull cgroup fixes from Tejun Heo:
"Two cpuset fixes. Both are for bugs in error handling paths and low
risk"
* tag 'cgroup-for-6.8-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Fix retval in update_cpumask()
cgroup/cpuset: Fix a memory leak in update_exclusive_cpumask()
Pull integrity fix from Mimi Zohar:
"A single fix to eliminate an unnecessary message"
* tag 'integrity-v6.8-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
integrity: eliminate unnecessary "Problem loading X.509 certificate" msg
Pull x86 platform driver fixes from Hans de Goede:
- Fix P2SB regression causing ACPI errors and high CPU load
- Fix error return path in amd_pmf_init_smart_pc()
* tag 'platform-drivers-x86-v6.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/amd/pmf: Fix missing error code in amd_pmf_init_smart_pc()
platform/x86: p2sb: On Goldmont only cache P2SB and SPI devfn BAR
Pull hyperv fixes from Wei Liu:
- Multiple fixes, cleanups and documentations for Hyper-V core code and
drivers
* tag 'hyperv-fixes-signed-20240303' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: make hv_bus const
x86/hyperv: Allow 15-bit APIC IDs for VTL platforms
x86/hyperv: Make encrypted/decrypted changes safe for load_unaligned_zeropad()
x86/mm: Regularize set_memory_p() parameters and make non-static
x86/hyperv: Use slow_virt_to_phys() in page transition hypervisor callback
Documentation: hyperv: Add overview of PCI pass-thru device support
Drivers: hv: vmbus: Update indentation in create_gpadl_header()
Drivers: hv: vmbus: Remove duplication and cleanup code in create_gpadl_header()
fbdev/hyperv_fb: Fix logic error for Gen2 VMs in hvfb_getmem()
Drivers: hv: vmbus: Calculate ring buffer size for more efficient use of memory
hv_utils: Allow implicit ICTIMESYNCFLAG_SYNC
Refactoring of the field get conversion introduced a regression in the
legacy Wake On Lan from a magic packet with i219 devices. Rx address
copied not correctly from MAC to PHY with FIELD_GET macro.
Fixes: b9a4525450 ("intel: legacy: field get conversion")
Suggested-by: Vitaly Lifshits <vitaly.lifshits@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When a frame can not be transmitted in XDP_REDIRECT
(e.g. due to a full queue), it is necessary to free
it by calling xdp_return_frame_rx_napi.
However, this is the responsibility of the caller of
the ndo_xdp_xmit (see for example bq_xmit_all in
kernel/bpf/devmap.c) and thus calling it inside
igc_xdp_xmit (which is the ndo_xdp_xmit of the igc
driver) as well will lead to memory corruption.
In fact, bq_xmit_all expects that it can return all
frames after the last successfully transmitted one.
Therefore, break for the first not transmitted frame,
but do not call xdp_return_frame_rx_napi in igc_xdp_xmit.
This is equally implemented in other Intel drivers
such as the igb.
There are two alternatives to this that were rejected:
1. Return num_frames as all the frames would have been
transmitted and release them inside igc_xdp_xmit.
While it might work technically, it is not what
the return value is meant to represent (i.e. the
number of SUCCESSFULLY transmitted packets).
2. Rework kernel/bpf/devmap.c and all drivers to
support non-consecutively dropped packets.
Besides being complex, it likely has a negative
performance impact without a significant gain
since it is anyway unlikely that the next frame
can be transmitted if the previous one was dropped.
The memory corruption can be reproduced with
the following script which leads to a kernel panic
after a few seconds. It basically generates more
traffic than a i225 NIC can transmit and pushes it
via XDP_REDIRECT from a virtual interface to the
physical interface where frames get dropped.
#!/bin/bash
INTERFACE=enp4s0
INTERFACE_IDX=`cat /sys/class/net/$INTERFACE/ifindex`
sudo ip link add dev veth1 type veth peer name veth2
sudo ip link set up $INTERFACE
sudo ip link set up veth1
sudo ip link set up veth2
cat << EOF > redirect.bpf.c
SEC("prog")
int redirect(struct xdp_md *ctx)
{
return bpf_redirect($INTERFACE_IDX, 0);
}
char _license[] SEC("license") = "GPL";
EOF
clang -O2 -g -Wall -target bpf -c redirect.bpf.c -o redirect.bpf.o
sudo ip link set veth2 xdp obj redirect.bpf.o
cat << EOF > pass.bpf.c
SEC("prog")
int pass(struct xdp_md *ctx)
{
return XDP_PASS;
}
char _license[] SEC("license") = "GPL";
EOF
clang -O2 -g -Wall -target bpf -c pass.bpf.c -o pass.bpf.o
sudo ip link set $INTERFACE xdp obj pass.bpf.o
cat << EOF > trafgen.cfg
{
/* Ethernet Header */
0xe8, 0x6a, 0x64, 0x41, 0xbf, 0x46,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
const16(ETH_P_IP),
/* IPv4 Header */
0b01000101, 0, # IPv4 version, IHL, TOS
const16(1028), # IPv4 total length (UDP length + 20 bytes (IP header))
const16(2), # IPv4 ident
0b01000000, 0, # IPv4 flags, fragmentation off
64, # IPv4 TTL
17, # Protocol UDP
csumip(14, 33), # IPv4 checksum
/* UDP Header */
10, 0, 1, 1, # IP Src - adapt as needed
10, 0, 1, 2, # IP Dest - adapt as needed
const16(6666), # UDP Src Port
const16(6666), # UDP Dest Port
const16(1008), # UDP length (UDP header 8 bytes + payload length)
csumudp(14, 34), # UDP checksum
/* Payload */
fill('W', 1000),
}
EOF
sudo trafgen -i trafgen.cfg -b3000MB -o veth1 --cpp
Fixes: 4ff3203610 ("igc: Add support for XDP_REDIRECT action")
Signed-off-by: Florian Kauer <florian.kauer@linutronix.de>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Helper i40e_is_fw_ver_eq() compares incorrectly given firmware version
as it returns true when the major version of running firmware is
greater than the given major version that is wrong and results in
failure during getting of DCB configuration where this helper is used.
Fix the check and return true only if the running FW version is exactly
equals to the given version.
Reproducer:
1. Load i40e driver
2. Check dmesg output
[root@host ~]# modprobe i40e
[root@host ~]# dmesg | grep 'i40e.*DCB'
[ 74.750642] i40e 0000:02:00.0: Query for DCB configuration failed, err -EIO aq_err I40E_AQ_RC_EINVAL
[ 74.759770] i40e 0000:02:00.0: DCB init failed -5, disabled
[ 74.966550] i40e 0000:02:00.1: Query for DCB configuration failed, err -EIO aq_err I40E_AQ_RC_EINVAL
[ 74.975683] i40e 0000:02:00.1: DCB init failed -5, disabled
Fixes: cf488e1322 ("i40e: Add other helpers to check version of running firmware and AQ API")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The function ice_bridge_setlink() may encounter a NULL pointer dereference
if nlmsg_find_attr() returns NULL and br_spec is dereferenced subsequently
in nla_for_each_nested(). To address this issue, add a check to ensure that
br_spec is not NULL before proceeding with the nested attribute iteration.
Fixes: b1edc14a3f ("ice: Implement ice_bridge_getlink and ice_bridge_setlink")
Signed-off-by: Rand Deeb <rand.sec96@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The E800 series hardware uses the same iAVF driver as older devices,
including the virtchnl negotiation scheme.
This negotiation scheme includes a mechanism to determine what type of RSS
should be supported, including RSS over PF virtchnl messages, RSS over
firmware AdminQ messages, and RSS via direct register access.
The PF driver will always prefer VIRTCHNL_VF_OFFLOAD_RSS_PF if its
supported by the VF driver. However, if an older VF driver is loaded, it
may request only VIRTCHNL_VF_OFFLOAD_RSS_REG or VIRTCHNL_VF_OFFLOAD_RSS_AQ.
The ice driver happily agrees to support these methods. Unfortunately, the
underlying hardware does not support these mechanisms. The E800 series VFs
don't have the appropriate registers for RSS_REG. The mailbox queue used by
VFs for VF to PF communication blocks messages which do not have the
VF-to-PF opcode.
Stop lying to the VF that it could support RSS over AdminQ or registers, as
these interfaces do not work when the hardware is operating on an E800
series device.
In practice this is unlikely to be hit by any normal user. The iAVF driver
has supported RSS over PF virtchnl commands since 2016, and always defaults
to using RSS_PF if possible.
In principle, nothing actually stops the existing VF from attempting to
access the registers or send an AQ command. However a properly coded VF
will check the capability flags and will report a more useful error if it
detects a case where the driver does not support the RSS offloads that it
does.
Fixes: 1071a8358a ("ice: Implement virtchnl commands for AVF support")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Alan Brady <alan.brady@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix softirq's not being handled during napi_schedule() call when
receiving marker packets for queue disable by disabling local bottom
half.
The issue can be seen on ifdown:
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!
Using ftrace to catch the failing scenario:
ifconfig [003] d.... 22739.830624: softirq_raise: vec=3 [action=NET_RX]
<idle>-0 [003] ..s.. 22739.831357: softirq_entry: vec=3 [action=NET_RX]
No interrupt and CPU is idle.
After the patch when disabling local BH before calling napi_schedule:
ifconfig [003] d.... 22993.928336: softirq_raise: vec=3 [action=NET_RX]
ifconfig [003] ..s1. 22993.928337: softirq_entry: vec=3 [action=NET_RX]
Fixes: c2d548cad1 ("idpf: add TX splitq napi poll support")
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This patch intended to fix an well-knonw issue in old drivers where the
endpoint type is taken for granted, which is often triggered by fuzzers.
That was the case for this driver [1], and although the fix seems to be
correct, it uncovered another issue that leads to a regression [2], if
the endpoints of the current interface are checked.
The driver makes use of endpoints that belong to a different interface
rather than the one it binds (it binds to the third interface, but also
accesses an endpoint from a different one). The driver should claim the
interfaces it requires, but that is still not the case.
Given that the regression is more severe than the issue found by
syzkaller, the best approach is reverting the patch that causes the
regression, and trying to fix the underlying problem before checking
the endpoint types again.
Note that reverting this patch will probably trigger the syzkaller bug
at some point.
This reverts commit 2b9c3eb32a.
Link: https://syzkaller.appspot.com/bug?extid=348331f63b034f89b622 [1]
Link: https://lore.kernel.org/linux-input/87sf161jjc.wl-tiwai@suse.de/ [2]
Fixes: 2b9c3eb32a ("Input: bcm5974 - check endpoint type before starting traffic")
Reported-by: Jacopo Radice <jacopo.radice@outlook.com>
Closes: https://bugzilla.suse.com/show_bug.cgi?id=1220030
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240305-revert_bcm5974_ep_check-v3-1-527198cf6499@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
On Arrow Lake S systems, MEI is no longer strictly connected to bus 0,
while graphics remain exclusively on bus 0. Adapt the component
matching logic to accommodate this change:
Original behavior: Required both MEI and graphics to be on the same
bus 0.
New behavior: Only enforces graphics to be on bus 0 (integrated),
allowing MEI to reside on any bus.
This ensures compatibility with Arrow Lake S and maintains functionality
for the legacy systems.
Fixes: 1dd924f688 ("mei: gsc_proxy: add gsc proxy driver")
Cc: stable@vger.kernel.org # v6.3+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240220200020.231192-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For CMA memory allocation, ownership is assigned to DSP to make it
accessible by the PD running on the DSP. With current implementation
HLOS VM is stored in the channel structure during rpmsg_probe and
this VM is passed to qcom_scm call as the source VM.
The qcom_scm call will overwrite the passed source VM with the next
VM which would cause a problem in case the scm call is again needed.
Adding a local copy of source VM whereever scm call is made to avoid
this problem.
Fixes: 0871561055 ("misc: fastrpc: Add support for audiopd")
Cc: stable <stable@kernel.org>
Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240224114247.85953-2-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comedi_test devices have a couple of timers (ai_timer and ao_timer)
that can be started to simulate hardware interrupts. Their expiry
functions normally reschedule the timer. The driver code calls either
del_timer_sync() or del_timer() to delete the timers from the queue, but
does not currently prevent the timers from rescheduling themselves so
synchronized deletion may be ineffective.
Add a couple of boolean members (one for each timer: ai_timer_enable and
ao_timer_enable) to the device private data structure to indicate
whether the timers are allowed to reschedule themselves. Set the member
to true when adding the timer to the queue, and to false when deleting
the timer from the queue in the waveform_ai_cancel() and
waveform_ao_cancel() functions.
The del_timer_sync() function is also called from the waveform_detach()
function, but the timer enable members will already be set to false when
that function is called, so no change is needed there.
Fixes: 403fe7f34e ("staging: comedi: comedi_test: fix timer race conditions")
Cc: stable@vger.kernel.org # 4.4+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20240214100747.16203-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ring expansion checker may incorrectly assume a completely full ring
is empty, missing the need for expansion.
This is due to a special empty ring case where the dequeue ends up
ahead of the enqueue pointer. This is seen when enqueued TRBs fill up
exactly a segment, with enqueue then pointing to the end link TRB.
Once those TRBs are handled the dequeue pointer will follow the link
TRB and end up pointing to the first entry on the next segment, past
the enqueue.
This same enqueue - dequeue condition can be true if a ring is full,
with enqueue ending on that last link TRB before the dequeue pointer
on the next segment.
This can be seen when queuing several ~510 small URBs via usbfs in
one go before a single one is handled (i.e. dequeue not moved from first
entry in segment).
Expand the ring already when enqueue reaches the link TRB before the
dequeue segment, instead of expanding it when enqueue moves into the
dequeue segment.
Reported-by: Chris Yokum <linux-usb@mail.totalphase.com>
Closes: https://lore.kernel.org/all/949223224.833962.1709339266739.JavaMail.zimbra@totalphase.com
Tested-by: Chris Yokum <linux-usb@mail.totalphase.com>
Fixes: f5af638f06 ("xhci: Fix transfer ring expansion size calculation")
Cc: stable@vger.kernel.org # v6.5+
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240305132312.955171-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 5c7e105cd1.
As identified by KASAN, the simplification done by the cleanup patch
was not legal.
>From tracing through the code, it can be seen that we're transmitting
from a 4096-byte circular buffer. We copy anywhere from 1-4 bytes from
it each time. The simplification runs into trouble when we get near
the end of the circular buffer. For instance, we might start out with
xmit->tail = 4094 and we want to transfer 4 bytes. With the code
before simplification this was no problem. We'd read buf[4094],
buf[4095], buf[0], and buf[1]. With the new code we'll do a
memcpy(&buf[4094], 4) which reads 2 bytes past the end of the buffer
and then skips transmitting what's at buf[0] and buf[1].
KASAN isn't 100% consistent at reporting this for me, but to be extra
confident in the analysis, I added traces of the tail and tx_bytes and
then wrote a test program:
while true; do
echo -n "abcdefghijklmnopqrstuvwxyz0" > /dev/ttyMSM0
sleep .1
done
I watched the traces over SSH and saw:
qcom_geni_serial_send_chunk_fifo: 4093 4
qcom_geni_serial_send_chunk_fifo: 1 3
Which indicated that one byte should be missing. Sure enough the
output that should have been:
abcdefghijklmnopqrstuvwxyz0
In one case was actually missing a byte:
abcdefghijklmnopqrstuvwyz0
Running "ls -al" on large directories also made the missing bytes
obvious since columns didn't line up.
While the original code may not be the most elegant, we only talking
about copying up to 4 bytes here. Let's just go back to the code that
worked.
Fixes: 5c7e105cd1 ("tty: serial: simplify qcom_geni_serial_send_chunk_fifo()")
Cc: stable <stable@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Jiri Slaby <jirislaby@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240304174952.1.I920a314049b345efd1f69d708e7f74d2213d0b49@changeid
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the remote uart device is not connected or not enabled after booting
up, the CTS line is high by default. At this time, if we enable the flow
control when opening the device(for example, using “stty -F /dev/ttyLP4
crtscts” command), there will be a pending idle preamble(first writing 0
and then writing 1 to UARTCTRL_TE will queue an idle preamble) that
cannot be sent out, resulting in the uart port fail to close(waiting for
TX empty), so the user space stty will have to wait for a long time or
forever.
This is an LPUART IP bug(idle preamble has higher priority than CTS),
here add a workaround patch to enable TX CTS after enabling UARTCTRL_TE,
so that the idle preamble does not get stuck due to CTS is deasserted.
Fixes: 380c966c09 ("tty: serial: fsl_lpuart: add 32-bit register interface support")
Cc: stable <stable@kernel.org>
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20240305015706.1050769-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While connecting to a Linux host with CDC_NCM_NTB_DEF_SIZE_TX
set to 65536, it has been observed that we receive short packets,
which come at interval of 5-10 seconds sometimes and have block
length zero but still contain 1-2 valid datagrams present.
According to the NCM spec:
"If wBlockLength = 0x0000, the block is terminated by a
short packet. In this case, the USB transfer must still
be shorter than dwNtbInMaxSize or dwNtbOutMaxSize. If
exactly dwNtbInMaxSize or dwNtbOutMaxSize bytes are sent,
and the size is a multiple of wMaxPacketSize for the
given pipe, then no ZLP shall be sent.
wBlockLength= 0x0000 must be used with extreme care, because
of the possibility that the host and device may get out of
sync, and because of test issues.
wBlockLength = 0x0000 allows the sender to reduce latency by
starting to send a very large NTB, and then shortening it when
the sender discovers that there’s not sufficient data to justify
sending a large NTB"
However, there is a potential issue with the current implementation,
as it checks for the occurrence of multiple NTBs in a single
giveback by verifying if the leftover bytes to be processed is zero
or not. If the block length reads zero, we would process the same
NTB infintely because the leftover bytes is never zero and it leads
to a crash. Fix this by bailing out if block length reads zero.
Cc: stable@vger.kernel.org
Fixes: 427694cfaa ("usb: gadget: ncm: Handle decoding of multiple NTB's in unwrap call")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20240228115441.2105585-1-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The DisplayPort driver's sysfs nodes may be present to the userspace before
typec_altmode_set_drvdata() completes in dp_altmode_probe. This means that
a sysfs read can trigger a NULL pointer error by deferencing dp->hpd in
hpd_show or dp->lock in pin_assignment_show, as dev_get_drvdata() returns
NULL in those cases.
Remove manual sysfs node creation in favor of adding attribute group as
default for devices bound to the driver. The ATTRIBUTE_GROUPS() macro is
not used here otherwise the path to the sysfs nodes is no longer compliant
with the ABI.
Fixes: 0e3bb7d689 ("usb: typec: Add driver for DisplayPort alternate mode")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Link: https://lore.kernel.org/r/20240229001101.3889432-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While commit 69f89168b3 ("usb: typec: tpcm: Fix issues with power being
removed during reset") fixes the boot issues for bus powered devices such
as LibreTech Renegade Elite/Firefly, it trades off the CC pins NOT being
Hi-Zed during errory recovery (i.e PORT_RESET) for devices which are NOT
bus powered(a.k.a self powered). This change Hi-Zs the CC pins only for
self powered devices, thus preventing brown out for bus powered devices
Adhering to spec is gaining more importance due to the Common charger
initiative enforced by the European Union.
Quoting from the spec:
4.5.2.2.2.1 ErrorRecovery State Requirements
The port shall not drive VBUS or VCONN, and shall present a
high-impedance to ground (above zOPEN) on its CC1 and CC2 pins.
Hi-Zing the CC pins is the inteded behavior for PORT_RESET.
CC pins are set to default state after tErrorRecovery in
PORT_RESET_WAIT_OFF.
4.5.2.2.2.2 Exiting From ErrorRecovery State
A Sink shall transition to Unattached.SNK after tErrorRecovery.
A Source shall transition to Unattached.SRC after tErrorRecovery.
Fixes: 69f89168b3 ("usb: typec: tpcm: Fix issues with power being removed during reset")
Cc: stable@vger.kernel.org
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240228000512.746252-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In packet offload, packets are not encrypted in XFRM stack, so
the next network layer which the packets will be forwarded to
should depend on where the packet came from (either xfrm4_output
or xfrm6_output) rather than the matched SA's family type.
Test: verified IPv6-in-IPv4 packets on Android device with
IPsec packet offload enabled
Signed-off-by: Mike Yu <yumike@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In current code, xfrm_bundle_create() always uses the matched
SA's family type to look up a xfrm child route for the skb.
The route returned by xfrm_dst_lookup() will eventually be
used in xfrm_output_resume() (skb_dst(skb)->ops->local_out()).
If packet offload is used, the above behavior can lead to
calling ip_local_out() for an IPv6 packet or calling
ip6_local_out() for an IPv4 packet, which is likely to fail.
This change fixes the behavior by checking if the matched SA
has packet offload enabled. If not, keep the same behavior;
if yes, use the matched SP's family type for the lookup.
Test: verified IPv6-in-IPv4 packets on Android device with
IPsec packet offload enabled
Signed-off-by: Mike Yu <yumike@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The icl+ power well code currently assumes that every AUX power
well maps to an encoder which is using said power well. That is
by no menas guaranteed as we:
- only register encoders for ports declared in the VBT
- combo PHY HDMI-only encoder no longer get an AUX CH since
commit 9856308c94 ("drm/i915: Only populate aux_ch if really needed")
However we have places such as intel_power_domains_sanitize_state()
that blindly traverse all the possible power wells. So these bits
of code may very well encounbter an aux power well with no associated
encoder.
In this particular case the BIOS seems to have left one AUX power
well enabled even though we're dealing with a HDMI only encoder
on a combo PHY. We then proceed to turn off said power well and
explode when we can't find a matching encoder. As a short term fix
we should be able to just skip the PHY related parts of the power
well programming since we know this situation can only happen with
combo PHYs.
Another option might be to go back to always picking an AUX CH for
all encoders. However I'm a bit wary about that since we might in
theory end up conflicting with the VBT AUX CH assignment. Also
that wouldn't help with encoders not declared in the VBT, should
we ever need to poke the corresponding power wells.
Longer term we need to figure out what the actual relationship
is between the PHY vs. AUX CH vs. AUX power well. Currently this
is entirely unclear.
Cc: stable@vger.kernel.org
Fixes: 9856308c94 ("drm/i915: Only populate aux_ch if really needed")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10184
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240223203216.15210-1-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>
(cherry picked from commit 6a8c66bf0e)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
On Goldmont p2sb_bar() only ever gets called for 2 devices, the actual P2SB
devfn 13,0 and the SPI controller which is part of the P2SB, devfn 13,2.
But the current p2sb code tries to cache BAR0 info for all of
devfn 13,0 to 13,7 . This involves calling pci_scan_single_device()
for device 13 functions 0-7 and the hw does not seem to like
pci_scan_single_device() getting called for some of the other hidden
devices. E.g. on an ASUS VivoBook D540NV-GQ065T this leads to continuous
ACPI errors leading to high CPU usage.
Fix this by only caching BAR0 info and thus only calling
pci_scan_single_device() for the P2SB and the SPI controller.
Fixes: 5913320eb0 ("platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe")
Reported-by: Danil Rybakov <danilrybakov249@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218531
Tested-by: Danil Rybakov <danilrybakov249@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240304134356.305375-2-hdegoede@redhat.com
Saeed Mahameed says:
====================
mlx5 fixes 2024-03-01
This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.
* tag 'mlx5-fixes-2024-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: Switch to using _bh variant of of spinlock API in port timestamping NAPI poll context
net/mlx5e: Use a memory barrier to enforce PTP WQ xmit submission tracking occurs after populating the metadata_map
net/mlx5e: Fix MACsec state loss upon state update in offload path
net/mlx5e: Change the warning when ignore_flow_level is not supported
net/mlx5: Check capability for fw_reset
net/mlx5: Fix fw reporter diagnose output
net/mlx5: E-switch, Change flow rule destination checking
Revert "net/mlx5e: Check the number of elements before walk TC rhashtable"
Revert "net/mlx5: Block entering switchdev mode with ns inconsistency"
====================
Link: https://lore.kernel.org/r/20240302070318.62997-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-03-01 (ixgbe, i40e, ice)
This series contains updates to ixgbe, i40e, and ice drivers.
Maciej corrects disable flow for ixgbe, i40e, and ice drivers which could
cause non-functional interface with AF_XDP.
Michal restores host configuration when changing MSI-X count for VFs on
ice driver.
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: reconfig host after changing MSI-X on VF
ice: reorder disabling IRQ and NAPI in ice_qp_dis
i40e: disable NAPI right after disabling irqs when handling xsk_pool
ixgbe: {dis, en}able irqs in ixgbe_txrx_ring_{dis, en}able
====================
Link: https://lore.kernel.org/r/20240301192549.2993798-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Based on the static analyzis of the code it looks like when an entry
from the MAC table was removed, the entry was still used after being
freed. More precise the vid of the mac_entry was used after calling
devm_kfree on the mac_entry.
The fix consists in first using the vid of the mac_entry to delete the
entry from the HW and after that to free it.
Fixes: b37a1bae74 ("net: sparx5: add mactable support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240301080608.3053468-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kishon updated his email in commit e6aa4edd2f ("MAINTAINERS: Update
Kishon's email address in PCI endpoint subsystem").
However, as he is no longer at TI, his TI email now bounces.
Add the same email as he has in MAINTAINERS to a mailmap, so that
get_maintainer.pl will not output an email that bounces.
(This is neeed as get_maintainer.pl will use "git author" to CC
people who have significantly modified the same file as you.)
Link: https://lkml.kernel.org/r/20240229134318.1201935-1-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Cc: Kishon Vijay Abraham I <kishon@kernel.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When debugging issues with a workload using SysV shmem, Michal Hocko has
come up with a reproducer that shows how a series of mprotect() operations
can result in an elevated shm_nattch and thus leak of the resource.
The problem is caused by wrong assumptions in vma_merge() commit
714965ca82 ("mm/mmap: start distinguishing if vma can be removed in
mergeability test"). The shmem vmas have a vma_ops->close callback that
decrements shm_nattch, and we remove the vma without calling it.
vma_merge() has thus historically avoided merging vma's with
vma_ops->close and commit 714965ca82 was supposed to keep it that way.
It relaxed the checks for vma_ops->close in can_vma_merge_after() assuming
that it is never called on a vma that would be a candidate for removal.
However, the vma_merge() code does also use the result of this check in
the decision to remove a different vma in the merge case 7.
A robust solution would be to refactor vma_merge() code in a way that the
vma_ops->close check is only done for vma's that are actually going to be
removed, and not as part of the preliminary checks. That would both solve
the existing bug, and also allow additional merges that the checks
currently prevent unnecessarily in some cases.
However to fix the existing bug first with a minimized risk, and for
easier stable backports, this patch only adds a vma_ops->close check to
the buggy case 7 specifically. All other cases of vma removal are covered
by the can_vma_merge_before() check that includes the test for
vma_ops->close.
The reproducer code, adapted from Michal Hocko's code:
int main(int argc, char *argv[]) {
int segment_id;
size_t segment_size = 20 * PAGE_SIZE;
char * sh_mem;
struct shmid_ds shmid_ds;
key_t key = 0x1234;
segment_id = shmget(key, segment_size,
IPC_CREAT | IPC_EXCL | S_IRUSR | S_IWUSR);
sh_mem = (char *)shmat(segment_id, NULL, 0);
mprotect(sh_mem + 2*PAGE_SIZE, PAGE_SIZE, PROT_NONE);
mprotect(sh_mem + PAGE_SIZE, PAGE_SIZE, PROT_WRITE);
mprotect(sh_mem + 2*PAGE_SIZE, PAGE_SIZE, PROT_WRITE);
shmdt(sh_mem);
shmctl(segment_id, IPC_STAT, &shmid_ds);
printf("nattch after shmdt(): %lu (expected: 0)\n", shmid_ds.shm_nattch);
if (shmctl(segment_id, IPC_RMID, 0))
printf("IPCRM failed %d\n", errno);
return (shmid_ds.shm_nattch) ? 1 : 0;
}
Link: https://lkml.kernel.org/r/20240222215930.14637-2-vbabka@suse.cz
Fixes: 714965ca82 ("mm/mmap: start distinguishing if vma can be removed in mergeability test")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After ptep_clear_flush(), if we find that src_folio is pinned we will fail
UFFDIO_MOVE and put src_folio back to src_pte entry, but the change to
src_folio->{mapping,index} is not restored in this process. This is not
what we expected, so fix it.
This can cause the rmap for that page to be invalid, possibly resulting
in memory corruption. At least swapout+migration would no longer work,
because we might fail to locate the mappings of that folio.
Link: https://lkml.kernel.org/r/20240222080815.46291-1-zhengqi.arch@bytedance.com
Fixes: adef440691 ("userfaultfd: UFFDIO_MOVE uABI")
Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Sven reports an infinite loop in __alloc_pages_slowpath() for costly order
__GFP_RETRY_MAYFAIL allocations that are also GFP_NOIO. Such combination
can happen in a suspend/resume context where a GFP_KERNEL allocation can
have __GFP_IO masked out via gfp_allowed_mask.
Quoting Sven:
1. try to do a "costly" allocation (order > PAGE_ALLOC_COSTLY_ORDER)
with __GFP_RETRY_MAYFAIL set.
2. page alloc's __alloc_pages_slowpath tries to get a page from the
freelist. This fails because there is nothing free of that costly
order.
3. page alloc tries to reclaim by calling __alloc_pages_direct_reclaim,
which bails out because a zone is ready to be compacted; it pretends
to have made a single page of progress.
4. page alloc tries to compact, but this always bails out early because
__GFP_IO is not set (it's not passed by the snd allocator, and even
if it were, we are suspending so the __GFP_IO flag would be cleared
anyway).
5. page alloc believes reclaim progress was made (because of the
pretense in item 3) and so it checks whether it should retry
compaction. The compaction retry logic thinks it should try again,
because:
a) reclaim is needed because of the early bail-out in item 4
b) a zonelist is suitable for compaction
6. goto 2. indefinite stall.
(end quote)
The immediate root cause is confusing the COMPACT_SKIPPED returned from
__alloc_pages_direct_compact() (step 4) due to lack of __GFP_IO to be
indicating a lack of order-0 pages, and in step 5 evaluating that in
should_compact_retry() as a reason to retry, before incrementing and
limiting the number of retries. There are however other places that
wrongly assume that compaction can happen while we lack __GFP_IO.
To fix this, introduce gfp_compaction_allowed() to abstract the __GFP_IO
evaluation and switch the open-coded test in try_to_compact_pages() to use
it.
Also use the new helper in:
- compaction_ready(), which will make reclaim not bail out in step 3, so
there's at least one attempt to actually reclaim, even if chances are
small for a costly order
- in_reclaim_compaction() which will make should_continue_reclaim()
return false and we don't over-reclaim unnecessarily
- in __alloc_pages_slowpath() to set a local variable can_compact,
which is then used to avoid retrying reclaim/compaction for costly
allocations (step 5) if we can't compact and also to skip the early
compaction attempt that we do in some cases
Link: https://lkml.kernel.org/r/20240221114357.13655-2-vbabka@suse.cz
Fixes: 3250845d05 ("Revert "mm, oom: prevent premature OOM killer invocation for high order request"")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Sven van Ashbrook <svenva@chromium.org>
Closes: https://lore.kernel.org/all/CAG-rBihs_xMKb3wrMO1%2B-%2Bp4fowP9oy1pa_OTkfxBzPUVOZF%2Bg@mail.gmail.com/
Tested-by: Karthikeyan Ramasubramanian <kramasub@chromium.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: Curtis Malainey <cujomalainey@chromium.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
cocci warnings: (new ones prefixed by >>)
>> drivers/firmware/microchip/mpfs-auto-update.c:387:72-78:
ERROR: application of sizeof to pointer
drivers/firmware/microchip/mpfs-auto-update.c:170:72-78:
ERROR: application of sizeof to pointer
response_msg is a pointer to u32, so the size of element it points to is
supposed to be a multiple of sizeof(u32), rather than sizeof(u32 *).
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403040516.CYxoWTXw-lkp@intel.com/
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Fixes: ec5b0f1193 ("firmware: microchip: add PolarFire SoC Auto Update support")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Timing select registers for SRC and CMD are by default
referring to the corresponding SSI word select.
The calculation rule from HW spec skips SSI8, which has
no clock connection.
>From section 43.2.18 CMD Output Timing Select Register (CMDOUT_TIMSEL),
of R-Car Series, 3rd Generation Hardware User’s Manual Rev.2.20:
CMD0_OUT_DIVCLK_ Output Timing
SEL [4:0] Signal Select
B'0 0110: ssi_ws0
B'0 0111: ssi_ws1
B'0 1000: ssi_ws2
B'0 1001: ssi_ws3
B'0 1010: ssi_ws4
B'0 1011: ssi_ws5
B'0 1100: ssi_ws6
B'0 1101: ssi_ws7
<GAP>
B'0 1110: ssi_ws9
B'0 1111: Setting prohibited
Fix the erroneous prohibited setting of timsel value 1111 (0xf) for SSI9
by using timsel value 1110 (0xe) instead. This is possible because SSI8
is not connected as shown by <GAP> in the table above.
[21.695055] rcar_sound ec500000.sound: b adg[0]-CMDOUT_TIMSEL (32):00000f00/00000f1f
Correct the timsel assignment.
Fixes: 629509c5bc ("ASoC: rsnd: add Gen2 SRC and DMAEngine support")
Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Andreas Pape <Andreas.Pape4@bosch.com>
Signed-off-by: Yeswanth Rayapati <yeswanth.rayapati@in.bosch.com>
Tested-by: Yeswanth Rayapati <yeswanth.rayapati@in.bosch.com>
[erosca: massage commit description]
Signed-off-by: Eugeniu Rosca <eugeniu.rosca@bosch.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/20240301085003.3057-1-erosca@de.adit-jv.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The linear ranges aren't really matching what they should be. Indeed,
the range is inclusive of the min value, so it makes sense the previous
range does NOT include the max step value representing the min value of
the range in question.
Since 3.4V is represented by the decimal value 232, the previous range
max step value should be 231 and not 232.
No expected change in behavior since 3.4V was mapped with step 232 from
the first range but is now mapped with step 232 from the second range.
While at it, remove the incorrect comment from the second range.
Fixes: f991a220a4 ("regulator: rk808: add rk806 support")
Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://msgid.link/r/20240223-rk806-regulator-ranges-v1-2-3904ab70d250@theobroma-systems.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The linear ranges aren't really matching what they should be. Indeed,
the range is inclusive of the min value, so it makes sense the previous
range does NOT include the max step value representing the min value of
the range in question.
Since 1.5V is represented by the decimal value 160, the previous range
max step value should be 159 and not 160. Similarly, 3.4V is represented
by the decimal value 236, so the previous range max value should be 235
and not 237.
The only change in behavior this makes is that this actually modeled
the ranges to map step with decimal value 237 with 3.65V instead of
3.4V (the max supported by the HW).
Fixes: f991a220a4 ("regulator: rk808: add rk806 support")
Cc: Quentin Schulz <foss+kernel@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://msgid.link/r/20240223-rk806-regulator-ranges-v1-1-3904ab70d250@theobroma-systems.com
Signed-off-by: Mark Brown <broonie@kernel.org>
arm64: tegra: Device tree fixes for v6.8
This contains two fixes to make the MGBE Ethernet devices found on
Tegra234 work properly.
* tag 'tegra-for-6.8-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Fix Tegra234 MGBE power-domains
arm64: tegra: Set the correct PHY mode for MGBE
Link: https://lore.kernel.org/r/20240226144536.1525704-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX fixes for 6.8, round 2:
- Update MAINTAINERS to use a public mailing list for NXP i.MX
development.
- Re-enable CONFIG_BACKLIGHT_CLASS_DEVICE in imx_v6_v7_defconfig to fix
a backlight regression.
- Remove DSI port endpoints from i.MX7 SoC DTSI to fix a display
regression.
- Fix LDB clocks property for i.MX8MP device tree.
- Fix TC9595 reset GPIO on DH i.MX8M Plus DHCOM SoM.
* tag 'imx-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mp: Fix LDB clocks property
arm64: dts: imx8mp: Fix TC9595 reset GPIO on DH i.MX8M Plus DHCOM SoM
MAINTAINERS: Use a proper mailinglist for NXP i.MX development
ARM: dts: imx7: remove DSI port endpoints
ARM: imx_v6_v7_defconfig: Restore CONFIG_BACKLIGHT_CLASS_DEVICE
Link: https://lore.kernel.org/r/ZdtPJzdenRybI+Bq@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm ARM64 DeviceTree fixes for 6.8
This marks an additional GPIO as protected on SM8650 devices, to avoid
a system reset caused by a security violation with some firmware
versions.
It also adds the missing interconnect-names, which resolves a regression
where one of the I2C busses on SM6115 devices would no longer probe in
Linux.
* tag 'qcom-arm64-fixes-for-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sm6115: Fix missing interconnect-names
arm64: dts: qcom: sm8650-mtp: add gpio74 as reserved gpio
arm64: dts: qcom: sm8650-qrd: add gpio74 as reserved gpio
Link: https://lore.kernel.org/r/20240225025205.479589-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Matthieu Baerts says:
====================
selftests: mptcp: fixes for diag.sh
Here are two patches fixing issues in MPTCP diag.sh kselftest:
- Patch 1 makes sure the exit code is '1' in case of error, and not the
test ID, not to return an exit code that would be wrongly interpreted
by the ksefltests framework, e.g. '4' means 'skip'.
- Patch 2 avoids waiting for unnecessary conditions, which can cause
timeouts in some very slow environments.
====================
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
When creating a lot of listener sockets, it is enough to wait only for
the last one, like we are doing before in diag.sh for other subtests.
If we do a check for each listener sockets, each time listing all
available sockets, it can take a very long time in very slow
environments, at the point we can reach some timeout.
When using the debug kconfig, the waiting time switches from more than
8 sec to 0.1 sec on my side. In slow/busy environments, and with a poll
timeout set to 30 ms, the waiting time could go up to ~100 sec because
the listener socket would timeout and stop, while the script would still
be checking one by one if all sockets are ready. The result is that
after having waited for everything to be ready, all sockets have been
stopped due to a timeout, and it is too late for the script to check how
many there were.
While at it, also removed ss options we don't need: we only need the
filtering options, to count how many listener sockets have been created.
We don't need to ask ss to display internal TCP information, and the
memory if the output is dropped by the 'wc -l' command anyway.
Fixes: b4b51d36bb ("selftests: mptcp: explicitly trigger the listener diag code-path")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/r/20240301063754.2ecefecf@kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test counter 'test_cnt' should not be returned in diag.sh, e.g. what
if only the 4th test fail? Will do 'exit 4' which is 'exit ${KSFT_SKIP}',
the whole test will be marked as skipped instead of 'failed'!
So we should do ret=${KSFT_FAIL} instead.
Fixes: df62f2ec3d ("selftests/mptcp: add diag interface tests")
Cc: stable@vger.kernel.org
Fixes: 42fb6cddec ("selftests: mptcp: more stable diag tests")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If drm_kms_helper_poll=n the output poll work will only get scheduled
from drm_helper_probe_single_connector_modes() to handle a delayed
hotplug event. Since polling is disabled the work in this case should
just call drm_kms_helper_hotplug_event() w/o detecting the state of
connectors and rescheduling the work.
After commit d33a54e399 after a delayed hotplug event above the
connectors did get re-detected in the poll work and the work got
re-scheduled periodically (since poll_running is also false if
drm_kms_helper_poll=n), in effect ignoring the drm_kms_helper_poll=n
kernel param.
Fix the above by calling only drm_kms_helper_hotplug_event() for a
delayed hotplug event if drm_kms_helper_hotplug_event=n, as was done
before d33a54e399.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: d33a54e399 ("drm/probe_helper: sort out poll_running vs poll_enabled")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240301152243.1670573-1-imre.deak@intel.com
If message fills up we need to stop writing. 'break' will
only get us out of the iteration over pools of a single
netdev, we need to also stop walking netdevs.
This results in either infinite dump, or missing pools,
depending on whether message full happens on the last
netdev (infinite dump) or non-last (missing pools).
Fixes: 950ab53b77 ("net: page_pool: implement GET in the netlink API")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I'm updating __assign_str() and will be removing the second parameter. To
make sure that it does not break anything, I make sure that it matches the
__string() field, as that is where the string is actually going to be
saved in. To make sure there's nothing that breaks, I added a WARN_ON() to
make sure that what was used in __string() is the same that is used in
__assign_str().
In doing this change, an error was triggered as __assign_str() now expects
the string passed in to be a char * value. I instead had the following
warning:
include/trace/events/qdisc.h: In function ‘trace_event_raw_event_qdisc_reset’:
include/trace/events/qdisc.h:91:35: error: passing argument 1 of 'strcmp' from incompatible pointer type [-Werror=incompatible-pointer-types]
91 | __assign_str(dev, qdisc_dev(q));
That's because the qdisc_enqueue() and qdisc_reset() pass in qdisc_dev(q)
to __assign_str() and to __string(). But that function returns a pointer
to struct net_device and not a string.
It appears that these events are just saving the pointer as a string and
then reading it as a string as well.
Use qdisc_dev(q)->name to save the device instead.
Fixes: a34dac0b90 ("net_sched: add tracepoints for qdisc_reset() and qdisc_destroy()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When not configured for wakeup lis3lv02d_i2c_suspend() will call
lis3lv02d_poweroff() even if the device has already been turned off
by the runtime-suspend handler and if configured for wakeup and
the device is runtime-suspended at this point then it is not turned
back on to serve as a wakeup source.
Before commit b1b9f7a494 ("misc: lis3lv02d_i2c: Add missing setting
of the reg_ctrl callback"), lis3lv02d_poweroff() failed to disable
the regulators which as a side effect made calling poweroff() twice ok.
Now that poweroff() correctly disables the regulators, doing this twice
triggers a WARN() in the regulator core:
unbalanced disables for regulator-dummy
WARNING: CPU: 1 PID: 92 at drivers/regulator/core.c:2999 _regulator_disable
...
Fix lis3lv02d_i2c_suspend() to not call poweroff() a second time if
already runtime-suspended and add a poweron() call when necessary to
make wakeup work.
lis3lv02d_i2c_resume() has similar issues, with an added weirness that
it always powers on the device if it is runtime suspended, after which
the first runtime-resume will call poweron() again, causing the enabled
count for the regulator to increase by 1 every suspend/resume. These
unbalanced regulator_enable() calls cause the regulator to never
be turned off and trigger the following WARN() on driver unbind:
WARNING: CPU: 1 PID: 1724 at drivers/regulator/core.c:2396 _regulator_put
Fix this by making lis3lv02d_i2c_resume() mirror the new suspend().
Fixes: b1b9f7a494 ("misc: lis3lv02d_i2c: Add missing setting of the reg_ctrl callback")
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/regressions/5fc6da74-af0a-4aac-b4d5-a000b39a63a5@molgen.mpg.de/
Cc: stable@vger.kernel.org
Cc: regressions@lists.linux.dev
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 15 7590
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/r/20240220190035.53402-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 09896da073 ("arm64: dts: qcom: msm8996: Hook up MPM") has
hooked up the MPM irq chip on the MSM8996 platform. However this causes
my Dragonboard 820c crash during bootup (usually when probing IOMMUs).
Revert the offending commit for now. Quick debug shows that making
tlmm's wakeup-parent point to the MPM is enough to trigger the crash.
Fixes: 09896da073 ("arm64: dts: qcom: msm8996: Hook up MPM")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240221-msm8996-revert-mpm-v1-1-cdca9e30c9b4@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Pull phy fixes from Vinod Koul:
- qcom: m31 pointer err fix, eusb2 fix redundant zero-out loop and v3
offset fix on qmp-usb
- freescale: fix for dphy alias
* tag 'phy-fixes2-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
phy: qcom-qmp-usb: fix v3 offsets data
phy: qualcomm: eusb2-repeater: Rework init to drop redundant zero-out loop
phy: qcom: phy-qcom-m31: fix wrong pointer pass to PTR_ERR()
phy: freescale: phy-fsl-imx8-mipi-dphy: Fix alias name to use dashes
Pull dmaengine fixes from Vinod Koul:
- dw-edma fixes to improve driver and remote HDMA setup
- fsl-edma fixes for SoC hange, irq init and byte calculations and
sparse fixes
- idxd: safe user copy of completion record fix
- ptdma: consistent DMA mask fix
* tag 'dmaengine-fix2-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: ptdma: use consistent DMA masks
dmaengine: fsl-qdma: add __iomem and struct in union to fix sparse warning
dmaengine: idxd: Ensure safe user copy of completion record
dmaengine: fsl-edma: correct max_segment_size setting
dmaengine: idxd: Remove shadow Event Log head stored in idxd
dmaengine: fsl-edma: correct calculation of 'nbytes' in multi-fifo scenario
dmaengine: fsl-qdma: init irq after reg initialization
dmaengine: fsl-qdma: fix SoC may hang on 16 byte unaligned read
dmaengine: dw-edma: eDMA: Add sync read before starting the DMA transfer in remote setup
dmaengine: dw-edma: HDMA: Add sync read before starting the DMA transfer in remote setup
dmaengine: dw-edma: Add HDMA remote interrupt configuration
dmaengine: dw-edma: HDMA_V0_REMOTEL_STOP_INT_EN typo fix
dmaengine: dw-edma: Fix wrong interrupt bit set for HDMA
dmaengine: dw-edma: Fix the ch_count hdma callback
Pull powerpc fixes from Michael Ellerman:
- Fix IOMMU table initialisation when doing kdump over SR-IOV
- Fix incorrect RTAS function name for resetting TCE tables
- Fix fpu_signal selftest failures since a recent change
Thanks to Gaurav Batra and Nathan Lynch.
* tag 'powerpc-6.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Fix fpu_signal failures
powerpc/rtas: use correct function name for resetting TCE tables
powerpc/pseries/iommu: IOMMU table is not initialized for kdump over SR-IOV
Pull x86 fixes from Borislav Petkov:
- Do not reserve SETUP_RNG_SEED setup data in the e820 map as it should
be used by kexec only
- Make sure MKTME feature detection happens at an earlier time in the
boot process so that the physical address size supported by the CPU
is properly corrected and MTRR masks are programmed properly, leading
to TDX systems booting without disable_mtrr_cleanup on the cmdline
- Make sure the different address sizes supported by the CPU are read
out as early as possible
* tag 'x86_urgent_for_v6.8_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/e820: Don't reserve SETUP_RNG_SEED in e820
x86/cpu/intel: Detect TME keyid bits before setting MTRR mask registers
x86/cpu: Allow reducing x86_phys_bits during early_identify_cpu()
Pull firewire fixes from Takashi Sakamoto:
"A workaround to suppress the continuous bus resets in the case that
older devices are connected to the modern 1394 OHCI hardware and
devices
In IEEE 1394 Amendment (IEEE 1394a-2000), the short bus reset is added
to resolve the shortcomings of the long bus reset in IEEE 1394-1995.
However, it is well-known that the solution is not necessarily
effective in the mixing environment that both IEEE 1394-1995 PHY and
IEEE 1394a-2000 (or later) PHY exist, as described in section 8.4.6.2
of IEEE 1394a-2000.
The current implementation of firewire stack schedules the short bus
reset when attempting to resolve the mismatch of gap count in the
certain generation of bus topology. It can cause the continuous bus
reset in the issued environment.
The workaround simply uses the long bus reset instead of the short bus
reset. It is desirable to detect whether the issued environment or
not. However, the way to access PHY registers from remote note is
firstly defined in IEEE 1394a-2000, thus it is not available in the
case"
* tag 'firewire-fixes-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: use long bus reset on gap count error
We accidently met the issue that the bash prompt is not shown after the
previous command done and until the next input if there's only one CPU
(In our issue other CPUs are isolated by isolcpus=). Further analysis
shows it's because the port entering runtime suspend even if there's
still pending chars in the buffer and the pending chars will only be
processed in next device resuming. We are using amba-pl011 and the
problematic flow is like below:
Bash kworker
tty_write()
file_tty_write()
n_tty_write()
uart_write()
__uart_start()
pm_runtime_get() // wakeup waker
queue_work()
pm_runtime_work()
rpm_resume()
status = RPM_RESUMING
serial_port_runtime_resume()
port->ops->start_tx()
pl011_tx_chars()
uart_write_wakeup()
[…]
__uart_start()
pm_runtime_get() < 0 // because runtime status = RPM_RESUMING
// later data are not commit to the port driver
status = RPM_ACTIVE
rpm_idle() -> rpm_suspend()
This patch tries to fix this by checking the port busy before entering
runtime suspending. A runtime_suspend callback is added for the port
driver. When entering runtime suspend the callback is invoked, if there's
still pending chars in the buffer then flush the buffer.
Fixes: 84a9582fd2 ("serial: core: Start managing serial controllers to enable runtime PM")
Cc: stable <stable@kernel.org>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Link: https://lore.kernel.org/r/20240226152351.40924-1-yangyicong@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When userspace opens the console, we call set_termios() passing a
termios with the console's configured baud rate. Currently this causes
dw8250_set_termios() to disable and then re-enable the UART clock at
the same frequency as it was originally. This can cause corruption
of any concurrent console output. Fix it by skipping the reclocking
if we are already at the correct rate.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Fixes: 4e26b134bd ("serial: 8250_dw: clock rate handling for all ACPI platforms")
Cc: stable@vger.kernel.org
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240222192635.1050502-1-pcc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When about to transmit the function imx_uart_start_tx is called and in
some RS485 configurations this function will call imx_uart_stop_rx. The
problem is that imx_uart_stop_rx will enable loopback in order to
release the RS485 bus, but when loopback is enabled transmitted data
will just be looped to RX.
This patch fixes the above problem by not enabling loopback when about
to transmit.
This driver now works well when used for RS485 half duplex master
configurations.
Fixes: 79d0224f6b ("tty: serial: imx: Handle RS485 DE signal active high")
Cc: stable <stable@kernel.org>
Signed-off-by: Rickard x Andersson <rickaran@axis.com>
Tested-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Link: https://lore.kernel.org/r/20240221115304.509811-1-rickaran@axis.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jonathan writes:
IIO: 2nd set of fixes for the 6.8 cycle.
Given this is very late these can wait for the 6.9 cycle if you would
prefer.
adi,adxl367
- Sleep for 15ms after reset to avoid reading before the device is awake.
- Fix FIFO register address.
asc,dlhl60d
- Avoid uninitialized data leak to user-space. Also suppress a false
positive clang warning by refactoring a loop.
bosch,bmp280
- Fix missing extra byte in SPI reads from BMP38x and BMP390 parts
invensense,mpu6050
- Fix handing of empty FIFO which can happen due to a race condition.
- Make sure frequency can be updated more than once when the FIFO is not
enabled.
* tag 'iio-fixes-for-6.8b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: accel: adxl367: fix I2C FIFO data register
iio: accel: adxl367: fix DEVID read after reset
iio: pressure: dlhl60d: Initialize empty DLH bytes
iio: imu: inv_mpu6050: fix frequency setting when chip is off
iio: pressure: Fixes BMP38x and BMP390 SPI support
iio: imu: inv_mpu6050: fix FIFO parsing when empty
William writes:
First set of Counter fixes for 6.8
One fix to ensure private data in struct counter_device_allochelper has
minimum alignment for safe DMA operations.
* tag 'counter-fixes-for-6.8b' of https://git.kernel.org/pub/scm/linux/kernel/git/wbg/counter:
counter: fix privdata alignment
Mika writes:
thunderbolt: Fix for v6.8-rc7
This includes one USB4/Thunderbolt fix for v6.8-rc7:
- Fix NULL pointer dereference in tb_port_update_credits() on
Apple Thunderbolt 1 hardware.
This has been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Fix NULL pointer dereference in tb_port_update_credits()
Pull xfs fix from Chandan Babu:
"Drop experimental warning message when mounting an xfs filesystem on
an fsdax device. We now consider xfs on fsdax to be stable"
* tag 'xfs-6.8-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: drop experimental warning for FSDAX
Pull gpio fixes from Bartosz Golaszewski:
- fix resource freeing ordering in error path when adding a GPIO chip
- only set pins to output after the reset is complete in gpio-74x164
* tag 'gpio-fixes-for-v6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: fix resource unwinding order in error path
gpiolib: Fix the error path order in gpiochip_add_data_with_key()
gpio: 74x164: Enable output pins after registers are reset
In commit 19416123ab ("block: define 'struct bvec_iter' as packed"),
what we need is to save the 4byte padding, and avoid `bio` to spread on
one extra cache line.
It is enough to define it as '__packed __aligned(4)', as '__packed'
alone means byte aligned, and can cause compiler to generate horrible
code on architectures that don't support unaligned access in case that
bvec_iter is embedded in other structures.
Cc: Mikulas Patocka <mpatocka@redhat.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 19416123ab ("block: define 'struct bvec_iter' as packed")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull SCSI fixes from James Bottomley:
"Two small fixes, all in drivers (the more obsolete mpt3sas and the
newer mpi3mr)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: mpt3sas: Prevent sending diag_reset when the controller is ready
scsi: mpi3mr: Reduce stack usage in mpi3mr_refresh_sas_ports()
The NAPI poll context is a softirq context. Do not use normal spinlock API
in this context to prevent concurrency issues.
Fixes: 3178308ad4 ("net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
CC: Vadim Fedorenko <vadfed@meta.com>
Just simply reordering the functions mlx5e_ptp_metadata_map_put and
mlx5e_ptpsq_track_metadata in the mlx5e_txwqe_complete context is not good
enough since both the compiler and CPU are free to reorder these two
functions. If reordering does occur, the issue that was supposedly fixed by
7e3f3ba97e ("net/mlx5e: Track xmit submission to PTP WQ after populating
metadata map") will be seen. This will lead to NULL pointer dereferences in
mlx5e_ptpsq_mark_ts_cqes_undelivered in the NAPI polling context due to the
tracking list being populated before the metadata map.
Fixes: 7e3f3ba97e ("net/mlx5e: Track xmit submission to PTP WQ after populating metadata map")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
CC: Vadim Fedorenko <vadfed@meta.com>
The packet number attribute of the SA is incremented by the device rather
than the software stack when enabling hardware offload. Because the packet
number attribute is managed by the hardware, the software has no insight
into the value of the packet number attribute actually written by the
device.
Previously when MACsec offload was enabled, the hardware object for
handling the offload was destroyed when the SA was disabled. Re-enabling
the SA would lead to a new hardware object being instantiated. This new
hardware object would not have any recollection of the correct packet
number for the SA. Instead, destroy the flow steering rule when
deactivating the SA and recreate it upon reactivation, preserving the
original hardware object.
Fixes: 8ff0ac5be1 ("net/mlx5: Add MACsec offload Tx command support")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Downgrade the print from mlx5_core_warn() to mlx5_core_dbg(), as it
is just a statement of fact that firmware doesn't support ignore flow
level.
And change the wording to "firmware flow level support is missing", to
make it more accurate.
Fixes: ae2ee3be99 ("net/mlx5: CT: Remove warning of ignore_flow_level support for VFs")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Suggested-by: Elliott, Robert (Servers) <elliott@hpe.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Functions which can't access MFRL (Management Firmware Reset Level)
register, have no use of fw_reset structures or events. Remove fw_reset
structures allocation and registration for fw reset events notifications
for these functions.
Having the devlink param enable_remote_dev_reset on functions that don't
have this capability is misleading as these functions are not allowed to
influence the reset flow. Hence, this patch removes this parameter for
such functions.
In addition, return not supported on devlink reload action fw_activate
for these functions.
Fixes: 38b9f903f2 ("net/mlx5: Handle sync reset request event")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Restore fw reporter diagnose to print the syndrome even if it is zero.
Following the cited commit, in this case (syndrome == 0) command returns no
output at all.
This fix restores command output in case syndrome is cleared:
$ devlink health diagnose pci/0000:82:00.0 reporter fw
Syndrome: 0
Fixes: d17f98bf7c ("net/mlx5: devlink health: use retained error fmsg API")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The checking in the cited commit is not accurate. In the common case,
VF destination is internal, and uplink destination is external.
However, uplink destination with packet reformat is considered as
internal because firmware uses LB+hairpin to support it. Update the
checking so header rewrite rules with both internal and external
destinations are not allowed.
Fixes: e0e22d59b4 ("net/mlx5: E-switch, Add checking for flow rule destinations")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This reverts commit 4e25b661f4.
This Commit was mistakenly applied by pulling the wrong tag, remove it.
Fixes: 4e25b661f4 ("net/mlx5e: Check the number of elements before walk TC rhashtable")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This reverts commit 662404b24a.
The revert is required due to the suspicion it is not good for anything
and cause crash.
Fixes: 662404b24a ("net/mlx5e: Block entering switchdev mode with ns inconsistency")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Pull power supply fixes from Sebastian Reichel:
- Kconfig dependency fix
- bq27xxx-i2c: do not free non-existing IRQ
* tag 'for-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: bq27xxx-i2c: Do not free non existing IRQ
power: supply: mm8013: select REGMAP_I2C
Pull iommufd fixes from Jason Gunthorpe:
"Four syzkaller found bugs:
- Corruption during error unwind in iommufd_access_change_ioas()
- Overlapping IDs in the test suite due to out of order destruction
- Missing locking for access->ioas in the test suite
- False failures in the test suite validation logic with huge pages"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd/selftest: Don't check map/unmap pairing with HUGE_PAGES
iommufd: Fix protection fault in iommufd_test_syz_conv_iova
iommufd/selftest: Fix mock_dev_num bug
iommufd: Fix iopt_access_list_id overwrite bug
Pull devicetree fix from Rob Herring:
"One fix for a bug in fw_devlink handling of OF graph. This doesn't
completely fix the reported problems, but it's with users adding out
of tree code"
* tag 'devicetree-fixes-for-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: property: fw_devlink: Fix stupid bug in remote-endpoint parsing
Pull RISC-V fixes from Palmer Dabbelt:
- detect ".option arch" support on not-yet-released LLVM builds
- fix missing TLB flush when modifying non-leaf PTEs
- fixes for T-Head custom extensions
- fix for systems with the legacy PMU, that manifests as a crash on
kernels built without SBI PMU support
- fix for systems that clear *envcfg on suspend, which manifests as
cbo.zero trapping after resume
- fixes for Svnapot systems, including removing Svnapot support for
huge vmalloc/vmap regions
* tag 'riscv-for-linus-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Sparse-Memory/vmemmap out-of-bounds fix
riscv: Fix pte_leaf_size() for NAPOT
Revert "riscv: mm: support Svnapot in huge vmap"
riscv: Save/restore envcfg CSR during CPU suspend
riscv: Add a custom ISA extension for the [ms]envcfg CSR
riscv: Fix enabling cbo.zero when running in M-mode
perf: RISCV: Fix panic on pmu overflow handler
MAINTAINERS: Update SiFive driver maintainers
drivers: perf: ctr_get_width function for legacy is not defined
drivers: perf: added capabilities for legacy PMU
RISC-V: Ignore V from the riscv,isa DT property on older T-Head CPUs
riscv: Fix build error if !CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION
riscv: mm: fix NOCACHE_THEAD does not set bit[61] correctly
riscv: add CALLER_ADDRx support
RISC-V: Drop invalid test from CONFIG_AS_HAS_OPTION_ARCH
kbuild: Add -Wa,--fatal-warnings to as-instr invocation
riscv: tlb: fix __p*d_free_tlb()
Pull ceph fix from Ilya Dryomov:
"Catch up with mdsmap encoding rectification which ended up being
necessary after all to enable cluster upgrades from problematic
v18.2.0 and v18.2.1 releases"
* tag 'ceph-for-6.8-rc7' of https://github.com/ceph/ceph-client:
ceph: switch to corrected encoding of max_xattr_size in mdsmap
Pull btrfs fixes from David Sterba:
- fix freeing allocated id for anon dev when snapshot creation fails
- fiemap fixes:
- followup for a recent deadlock fix, ranges that fiemap can access
can still race with ordered extent completion
- make sure fiemap with SYNC flag does not race with writes
* tag 'for-6.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix double free of anonymous device after snapshot creation failure
btrfs: ensure fiemap doesn't race with writes when FIEMAP_FLAG_SYNC is given
btrfs: fix race between ordered extent completion and fiemap
Pull vfs fixes from Christian Brauner:
"Two small fixes:
- Fix an endless loop during afs directory iteration caused by not
skipping silly-rename files correctly.
- Fix reporting of completion events for aio causing leaks in
userspace. This is based on the fix last week as it's now possible
to recognize aio events submitted through the old aio interface"
* tag 'vfs-6.8-rc7.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs/aio: Make io_cancel() generate completions again
afs: Fix endless loop in directory parsing
Pull iommu fix from Joerg Roedel:
- Fix SVA handle sharing in multi device case
* tag 'iommu-fix-v6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/sva: Fix SVA handle sharing in multi device case
Pull EFI fixes from Ard Biesheuvel:
"Only the EFI variable name size change is significant, and will be
backported once it lands. The others are cleanup.
- Fix phys_addr_t size confusion in 32-bit capsule loader
- Reduce maximum EFI variable name size to 512 to work around buggy
firmware
- Drop some redundant code from efivarfs while at it"
* tag 'efi-fixes-for-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efivarfs: Drop 'duplicates' bool parameter on efivar_init()
efivarfs: Drop redundant cleanup on fill_super() failure
efivarfs: Request at most 512 bytes for variable names
efi/capsule-loader: fix incorrect allocation size
Pull sound fixes from Takashi Iwai:
"The amount of changes wasn't as small as wished, but all reasonably
small fixes. There is a PCM core API change, which is for correcting
the behavior change we took in 6.8. The rest are device-specific fixes
for ASoC AMD, Qualcomm, Cirrus codecs, HD-audio quirks & co"
* tag 'sound-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: amd: yc: Fix non-functional mic on Lenovo 21J2
ASoC: amd: yc: add new YC platform variant (0x63) support
ALSA: hda/realtek - ALC285 reduce pop noise from Headphone port
ASoC: amd: yc: Add Lenovo ThinkBook 21J0 into DMI quirk table
ALSA: hda/realtek: Add special fixup for Lenovo 14IRP8
ASoC: soc-card: Fix missing locking in snd_soc_card_get_kcontrol()
ALSA: hda/realtek: tas2781: enable subwoofer volume control
ALSA: pcm: clarify and fix default msbits value for all formats
ASoC: qcom: Fix uninitialized pointer dmactl
ALSA: hda/realtek: fix mute/micmute LED For HP mt440
ALSA: Drop leftover snd-rtctimer stuff from Makefile
ALSA: ump: Fix the discard error code from snd_ump_legacy_open()
ALSA: hda/realtek: Enable Mute LED on HP 840 G8 (MB 8AB8)
ASoC: cs35l56: Must clear HALO_STATE before issuing SYSTEM_RESET
ALSA: hda/realtek: Fix top speaker connection on Dell Inspiron 16 Plus 7630
ALSA: firewire-lib: fix to check cycle continuity
Pull drm fixes from Dave Airlie:
"Bunch of fixes, xe, amdgpu, nouveau and tegra all have a few. Then
drm/bridge including some drivers/soc fallout fixes. The biggest thing
in here is a new unit test for some buddy allocator fixes, otherwise a
misc fbcon, ttm unit test and one msm revert.
Seems pretty normal for this stage.
buddy:
- two allocation fixes + unit test
fbcon:
- font restore syzkaller fix
ttm:
- kunit test fix
bridge:
- fix aux-hpd leaks
- fix aux-hpd registration
- fix use after free in soc/qcom
- fix boot on soc/qcom
xe:
- A couple of tracepoint updates from Priyanka and Lucas
- Make sure BINDs are completed before accepting UNBINDs on LR vms
- Don't arbitrarily restrict max number of batched binds
- Add uapi for dumpable bos (agreed on IRC)
- Remove unused uapi flags and a leftover comment
- A couple of fixes related to the execlist backend
msm:
- DP: Revert a change which was causing a HDP regression
amdgpu:
- Fix potential buffer overflow
- Fix power min cap
- Suspend/resume fix
- SI PM fix
- eDP fix
nouveau:
- fix a misreported VRAM sizing
- fix a regression in suspend/resume due to freeing
tegra:
- host1x reset fix
- only remove existing driver if display is possible"
* tag 'drm-fixes-2024-03-01' of https://gitlab.freedesktop.org/drm/kernel: (32 commits)
drm/nouveau: keep DMA buffers required for suspend/resume
nouveau: report byte usage in VRAM usage
drm/xe/xe_trace: Add move_lacks_source detail to xe_bo_move trace
drm/xe: Deny unbinds if uapi ufence pending
drm/xe: Expose user fence from xe_sync_entry
drm/xe: Use pointers in trace events
drm/xe/xe_bo_move: Enhance xe_bo_move trace
drm/xe/mmio: fix build warning for BAR resize on 32-bit
drm/xe: get rid of MAX_BINDS
drm/xe: Use vmalloc for array of bind allocation in bind IOCTL
drm/xe: Don't support execlists in xe_gt_tlb_invalidation layer
drm/xe: Fix execlist splat
drm/xe/uapi: Remove unused flags
drm/xe/uapi: Remove DRM_XE_VM_BIND_FLAG_ASYNC comment left over
drm/xe: Add uapi for dumpable bos
drm/amd/display: Add monitor patch for specific eDP
Revert "drm/msm/dp: use drm_bridge_hpd_notify() to report HPD status changes"
drm/tests/drm_buddy: add alloc_range_bias test
drm/buddy: check range allocation matches alignment
drm/buddy: fix range bias
...
Pull fprobe fix from Masami Hiramatsu:
- allocate entry_data_size buffer for each rethook instance.
This fixes a buffer overrun bug (which leads a kernel crash)
when fprobe user uses its entry_data in the entry_handler.
* tag 'probes-fixes-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fprobe: Fix to allocate entry_data_size buffer with rethook instances
SETUP_RNG_SEED in setup_data is supplied by kexec and should
not be reserved in the e820 map.
Doing so reserves 16 bytes of RAM when booting with kexec.
(16 bytes because data->len is zeroed by parse_setup_data so only
sizeof(setup_data) is reserved.)
When kexec is used repeatedly, each boot adds two entries in the
kexec-provided e820 map as the 16-byte range splits a larger
range of usable memory. Eventually all of the 128 available entries
get used up. The next split will result in losing usable memory
as the new entries cannot be added to the e820 map.
Fixes: 68b8e9713c ("x86/setup: Use rng seeds from setup_data")
Signed-off-by: Jiri Bohac <jbohac@suse.cz>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/ZbmOjKnARGiaYBd5@dwarf.suse.cz
During VSI reconfiguration filters and VSI config which is set in
ice_vf_init_host_cfg() are lost. Recall the host configuration function
to restore them.
Without this config VF on which MSI-X amount was changed might had a
connection problems.
Fixes: 4d38cb44bd ("ice: manage VFs MSI-X using resource tracking")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ice_qp_dis() currently does things in very mixed way. Tx is stopped
before disabling IRQ on related queue vector, then it takes care of
disabling Rx and finally NAPI is disabled.
Let us start with disabling IRQs in the first place followed by turning
off NAPI. Then it is safe to handle queues.
One subtle change on top of that is that even though ice_qp_ena() looks
more sane, clear ICE_CFG_BUSY as the last thing there.
Fixes: 2d4238f556 ("ice: Add support for AF_XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Disable NAPI before shutting down queues that this particular NAPI
contains so that the order of actions in i40e_queue_pair_disable()
mirrors what we do in i40e_queue_pair_enable().
Fixes: 123cecd427 ("i40e: added queue pair disable/enable functions")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently routines that are supposed to toggle state of ring pair do not
take care of associated interrupt with queue vector that these rings
belong to. This causes funky issues such as dead interface due to irq
misconfiguration, as per Pavel's report from Closes: tag.
Add a function responsible for disabling single IRQ in EIMC register and
call this as a very first thing when disabling ring pair during xsk_pool
setup. For enable let's reuse ixgbe_irq_enable_queues(). Besides this,
disable/enable NAPI as first/last thing when dealing with closing or
opening ring pair that xsk_pool is being configured on.
Reported-by: Pavel Vazharov <pavel@x3me.net>
Closes: https://lore.kernel.org/netdev/CAJEV1ijxNyPTwASJER1bcZzS9nMoZJqfR86nu_3jFFVXzZQ4NA@mail.gmail.com/
Fixes: 024aa5800f ("ixgbe: added Rx/Tx ring disable/enable functions")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Limit the WiFi PCIe link speed to Gen2 speed (500 MB/s), which is the
speed that the boot firmware has brought up the link at (and that
Windows uses).
This is specifically needed to avoid a large amount of link errors when
restarting the link during boot (but which are currently not reported).
This also appears to fix intermittent failures to download the ath11k
firmware during boot which can be seen when there is a longer delay
between restarting the link and loading the WiFi driver (e.g. when using
full disk encryption).
Fixes: 123b30a756 ("arm64: dts: qcom: sc8280xp-x13s: enable WiFi controller")
Cc: stable@vger.kernel.org # 6.2
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20240223152124.20042-8-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
My recent commit e5d00aaac6 ("selftests/powerpc: Check all FPRs in
fpu_preempt") inadvertently broke the fpu_signal test.
It needs to take into account that fpu_preempt now loads 32 FPRs, so
enlarge darray.
Also use the newly added randomise_darray() to properly randomise darray.
Finally the checking done in signal_fpu_sig() needs to skip checking
f30/f31, because they are used as scratch registers in check_all_fprs(),
called by preempt_fpu(), and so could hold other values when the signal
is taken.
Fixes: e5d00aaac6 ("selftests/powerpc: Check all FPRs in fpu_preempt")
Reported-by: Spoorthy <spoorthy@linux.ibm.com>
Depends-on: 2ba107f679 ("selftests/powerpc: Generate better bit patterns for FPU tests")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240301101035.1230024-1-mpe@ellerman.id.au
In azx_probe_codecs function, when bus->codec_mask is becomes to 0(no codecs),
execute azx_init_chip, bus->codec_mask will be initialized to a value again,
this causes snd_hda_codec_new function to run, the process is as follows:
-->snd_hda_codec_new
-->snd_hda_codec_device_init
-->snd_hdac_device_init---snd_hdac_read_parm(...AC_PAR_VENDOR_ID) 2s
---snd_hdac_read_parm(...AC_PAR_VENDOR_ID) 2s
---snd_hdac_read_parm(...AC_PAR_SUBSYSTEM_ID) 2s
---snd_hdac_read_parm(...AC_PAR_REV_ID) 2s
---snd_hdac_read_parm(...AC_PAR_NODE_COUNT) 2s
when no codecs, read communication is error, each command will be polled for
2 second, a total of 10s, it is easy to some problem.
like this:
2 [ 14.833404][ 6] [ T164] hda 0006:00: Codec #0 probe error; disabling it...
3 [ 14.844178][ 6] [ T164] hda 0006:00: codec_mask = 0x1
4 [ 14.880532][ 6] [ T164] hda 0006:00: too slow response, last cmd=0x0f0000
5 [ 15.891988][ 6] [ T164] hda 0006:00: too slow response, last cmd=0x0f0000
6 [ 16.978090][ 6] [ T164] hda 0006:00: too slow response, last cmd=0x0f0001
7 [ 18.140895][ 6] [ T164] hda 0006:00: too slow response, last cmd=0x0f0002
8 [ 19.135516][ 6] [ T164] hda 0006:00: too slow response, last cmd=0x0f0004
10 [ 19.900086][ 6] [ T164] hda 0006:00: no codecs initialized
11 [ 45.573398][ 2] [ C2] watchdog: BUG: soft lockup - CPU#2 stuck for 22s! [kworker/2:0:25]
Here, when bus->codec_mask is 0, use a direct break to avoid execute snd_hda_codec_new function.
Signed-off-by: songxiebing <songxiebing@kylinos.cn>
Link: https://lore.kernel.org/r/20240301011841.7247-1-soxiebing@163.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It is now possible to disable BQL, but that causes the cpsw driver to break:
drivers/net/ethernet/ti/am65-cpsw-nuss.c:297:28: error: no member named 'dql' in 'struct netdev_queue'
297 | dql_avail(&netif_txq->dql),
There is already a helper function in net/sch_generic.h that could
be used to help here. Move its implementation into the common
linux/netdevice.h along with the other bql interfaces and change
both users over to the new interface.
Fixes: ea7f3cfaa5 ("net: bql: allow the config to be disabled")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current driver has some asymmetry in the runtime PM calls. On lan78xx_open()
it will call usb_autopm_get() and unconditionally usb_autopm_put(). And
on lan78xx_stop() it will call only usb_autopm_put(). So far, it was
working only because this driver do not activate autosuspend by default,
so it was visible only by warning "Runtime PM usage count underflow!".
Since, with current driver, we can't use runtime PM with active link,
execute lan78xx_open()->usb_autopm_put() only in error case. Otherwise,
keep ref counting high as long as interface is open.
Fixes: 55d7de9de6 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The internal delay properties are not mandatory and should have a
documented default value. The device only supports either no delay or a
fixed delay and the device reset default is no delay, document the
default as no delay.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a CoCo VM, when transitioning memory from encrypted to decrypted, or
vice versa, the caller of set_memory_encrypted() or set_memory_decrypted()
is responsible for ensuring the memory isn't in use and isn't referenced
while the transition is in progress. The transition has multiple steps,
and the memory is in an inconsistent state until all steps are complete.
A reference while the state is inconsistent could result in an exception
that can't be cleanly fixed up.
However, the kernel load_unaligned_zeropad() mechanism could cause a stray
reference that can't be prevented by the caller of set_memory_encrypted()
or set_memory_decrypted(), so there's specific code to handle this case.
But a CoCo VM running on Hyper-V may be configured to run with a paravisor,
with the #VC or #VE exception routed to the paravisor. There's no
architectural way to forward the exceptions back to the guest kernel, and
in such a case, the load_unaligned_zeropad() specific code doesn't work.
To avoid this problem, mark pages as "not present" while a transition
is in progress. If load_unaligned_zeropad() causes a stray reference, a
normal page fault is generated instead of #VC or #VE, and the
page-fault-based fixup handlers for load_unaligned_zeropad() resolve the
reference. When the encrypted/decrypted transition is complete, mark the
pages as "present" again.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240116022008.1023398-4-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240116022008.1023398-4-mhklinux@outlook.com>
In preparation for temporarily marking pages not present during a
transition between encrypted and decrypted, use slow_virt_to_phys()
in the hypervisor callback. As long as the PFN is correct,
slow_virt_to_phys() works even if the leaf PTE is not present.
The existing functions that depend on vmalloc_to_page() all
require that the leaf PTE be marked present, so they don't work.
Update the comments for slow_virt_to_phys() to note this broader usage
and the requirement to work even if the PTE is not marked present.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Link: https://lore.kernel.org/r/20240116022008.1023398-2-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240116022008.1023398-2-mhklinux@outlook.com>
create_gpadl_header() creates a message header, and one or more message
bodies if the number of GPADL entries exceeds what fits in the
header. Currently the code for creating the message header is
duplicated in the two halves of the main "if" statement governing
whether message bodies are created.
Eliminate the duplication by making minor tweaks to the logic and
associated comments. While here, simplify the handling of memory
allocation errors, and use umin() instead of open coding it.
For ease of review, the indentation of sizable chunks of code is
*not* changed. A follow-on patch updates only the indentation.
No functional change.
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20240111165451.269418-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240111165451.269418-1-mhklinux@outlook.com>
A recent commit removing the use of screen_info introduced a logic
error. The error causes hvfb_getmem() to always return -ENOMEM
for Generation 2 VMs. As a result, the Hyper-V frame buffer
device fails to initialize. The error was introduced by removing
an "else if" clause, leaving Gen2 VMs to always take the -ENOMEM
error path.
Fix the problem by removing the error path "else" clause. Gen 2
VMs now always proceed through the MMIO memory allocation code,
but with "base" and "size" defaulting to 0.
Fixes: 0aa0838c84 ("fbdev/hyperv_fb: Remove firmware framebuffers with aperture helpers")
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/20240201060022.233666-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240201060022.233666-1-mhklinux@outlook.com>
The VMBUS_RING_SIZE macro adds space for a ring buffer header to the
requested ring buffer size. The header size is always 1 page, and so
its size varies based on the PAGE_SIZE for which the kernel is built.
If the requested ring buffer size is a large power-of-2 size and the header
size is small, the resulting size is inefficient in its use of memory.
For example, a 512 Kbyte ring buffer with a 4 Kbyte page size results in
a 516 Kbyte allocation, which is rounded to up 1 Mbyte by the memory
allocator, and wastes 508 Kbytes of memory.
In such situations, the exact size of the ring buffer isn't that important,
and it's OK to allocate the 4 Kbyte header at the beginning of the 512
Kbytes, leaving the ring buffer itself with just 508 Kbytes. The memory
allocation can be 512 Kbytes instead of 1 Mbyte and nothing is wasted.
Update VMBUS_RING_SIZE to implement this approach for "large" ring buffer
sizes. "Large" is somewhat arbitrarily defined as 8 times the size of
the ring buffer header (which is of size PAGE_SIZE). For example, for
4 Kbyte PAGE_SIZE, ring buffers of 32 Kbytes and larger use the first
4 Kbytes as the ring buffer header. For 64 Kbyte PAGE_SIZE, ring buffers
of 512 Kbytes and larger use the first 64 Kbytes as the ring buffer
header. In both cases, smaller sizes add space for the header so
the ring size isn't reduced too much by using part of the space for
the header. For example, with a 64 Kbyte page size, we don't want
a 128 Kbyte ring buffer to be reduced to 64 Kbytes by allocating half
of the space for the header. In such a case, the memory allocation
is less efficient, but it's the best that can be done.
While the new algorithm slightly changes the amount of space allocated
for ring buffers by drivers that use VMBUS_RING_SIZE, the devices aren't
known to be sensitive to small changes in ring buffer size, so there
shouldn't be any effect.
Fixes: c1135c7fd0 ("Drivers: hv: vmbus: Introduce types of GPADL")
Fixes: 6941f67ad3 ("hv_netvsc: Calculate correct ring size when PAGE_SIZE is not 4 Kbytes")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218502
Cc: stable@vger.kernel.org
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Souradeep Chakrabarti <schakrabarti@linux.microsoft.com>
Link: https://lore.kernel.org/r/20240229004533.313662-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240229004533.313662-1-mhklinux@outlook.com>
After shuffling the code, error path wasn't updated correctly.
Fix it here.
Fixes: 2f4133bb5f ("gpiolib: No need to call gpiochip_remove_pin_ranges() twice")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Chip outputs are enabled[1] before actual reset is performed[2] which might
cause pin output value to flip flop if previous pin value was set to 1.
Fix that behavior by making sure chip is fully reset before all outputs are
enabled.
Flip-flop can be noticed when module is removed and inserted again and one of
the pins was changed to 1 before removal. 100 microsecond flipping is
noticeable on oscilloscope (100khz SPI bus).
For a properly reset chip - output is enabled around 100 microseconds (on 100khz
SPI bus) later during probing process hence should be irrelevant behavioral
change.
Fixes: 7ebc194d0f (gpio: 74x164: Introduce 'enable-gpios' property)
Link: https://elixir.bootlin.com/linux/v6.7.4/source/drivers/gpio/gpio-74x164.c#L130 [1]
Link: https://elixir.bootlin.com/linux/v6.7.4/source/drivers/gpio/gpio-74x164.c#L150 [2]
Signed-off-by: Arturas Moskvinas <arturas.moskvinas@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Nouveau deallocates a few buffers post GPU init which are required for GPU suspend/resume to function correctly.
This is likely not as big an issue on systems where the NVGPU is the only GPU, but on multi-GPU set ups it leads to a regression where the kernel module errors and results in a system-wide rendering freeze.
This commit addresses that regression by moving the two buffers required for suspend and resume to be deallocated at driver unload instead of post init.
Fixes: 042b5f8384 ("drm/nouveau: fix several DMA buffer leaks")
Signed-off-by: Sid Pranjale <sidpranjale127@protonmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Turns out usage is always in bytes not shifted.
Fixes: 72fa02fdf8 ("nouveau: add an ioctl to report vram usage")
Signed-off-by: Dave Airlie <airlied@redhat.com>
UAPI Changes:
- A couple of tracepoint updates from Priyanka and Lucas.
- Make sure BINDs are completed before accepting UNBINDs on LR vms.
- Don't arbitrarily restrict max number of batched binds.
- Add uapi for dumpable bos (agreed on IRC).
- Remove unused uapi flags and a leftover comment.
Driver Changes:
- A couple of fixes related to the execlist backend.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZeCBg4MA2hd1oggN@fedora
A reset fix for host1x, a resource leak fix and a probe fix for aux-hpd,
a use-after-free fix and a boot fix for a pmic_glink qcom driver in
drivers/soc, a fix for the simpledrm/tegra transition, a kunit fix for
the TTM tests, a font handling fix for fbcon, two allocation fixes and a
kunit test to cover them for drm/buddy
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240229-angelic-adorable-teal-fbfabb@houat
When creating a snapshot we may do a double free of an anonymous device
in case there's an error committing the transaction. The second free may
result in freeing an anonymous device number that was allocated by some
other subsystem in the kernel or another btrfs filesystem.
The steps that lead to this:
1) At ioctl.c:create_snapshot() we allocate an anonymous device number
and assign it to pending_snapshot->anon_dev;
2) Then we call btrfs_commit_transaction() and end up at
transaction.c:create_pending_snapshot();
3) There we call btrfs_get_new_fs_root() and pass it the anonymous device
number stored in pending_snapshot->anon_dev;
4) btrfs_get_new_fs_root() frees that anonymous device number because
btrfs_lookup_fs_root() returned a root - someone else did a lookup
of the new root already, which could some task doing backref walking;
5) After that some error happens in the transaction commit path, and at
ioctl.c:create_snapshot() we jump to the 'fail' label, and after
that we free again the same anonymous device number, which in the
meanwhile may have been reallocated somewhere else, because
pending_snapshot->anon_dev still has the same value as in step 1.
Recently syzbot ran into this and reported the following trace:
------------[ cut here ]------------
ida_free called for id=51 which is not allocated.
WARNING: CPU: 1 PID: 31038 at lib/idr.c:525 ida_free+0x370/0x420 lib/idr.c:525
Modules linked in:
CPU: 1 PID: 31038 Comm: syz-executor.2 Not tainted 6.8.0-rc4-syzkaller-00410-gc02197fc9076 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
RIP: 0010:ida_free+0x370/0x420 lib/idr.c:525
Code: 10 42 80 3c 28 (...)
RSP: 0018:ffffc90015a67300 EFLAGS: 00010246
RAX: be5130472f5dd000 RBX: 0000000000000033 RCX: 0000000000040000
RDX: ffffc90009a7a000 RSI: 000000000003ffff RDI: 0000000000040000
RBP: ffffc90015a673f0 R08: ffffffff81577992 R09: 1ffff92002b4cdb4
R10: dffffc0000000000 R11: fffff52002b4cdb5 R12: 0000000000000246
R13: dffffc0000000000 R14: ffffffff8e256b80 R15: 0000000000000246
FS: 00007fca3f4b46c0(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f167a17b978 CR3: 000000001ed26000 CR4: 0000000000350ef0
Call Trace:
<TASK>
btrfs_get_root_ref+0xa48/0xaf0 fs/btrfs/disk-io.c:1346
create_pending_snapshot+0xff2/0x2bc0 fs/btrfs/transaction.c:1837
create_pending_snapshots+0x195/0x1d0 fs/btrfs/transaction.c:1931
btrfs_commit_transaction+0xf1c/0x3740 fs/btrfs/transaction.c:2404
create_snapshot+0x507/0x880 fs/btrfs/ioctl.c:848
btrfs_mksubvol+0x5d0/0x750 fs/btrfs/ioctl.c:998
btrfs_mksnapshot+0xb5/0xf0 fs/btrfs/ioctl.c:1044
__btrfs_ioctl_snap_create+0x387/0x4b0 fs/btrfs/ioctl.c:1306
btrfs_ioctl_snap_create_v2+0x1ca/0x400 fs/btrfs/ioctl.c:1393
btrfs_ioctl+0xa74/0xd40
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:871 [inline]
__se_sys_ioctl+0xfe/0x170 fs/ioctl.c:857
do_syscall_64+0xfb/0x240
entry_SYSCALL_64_after_hwframe+0x6f/0x77
RIP: 0033:0x7fca3e67dda9
Code: 28 00 00 00 (...)
RSP: 002b:00007fca3f4b40c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007fca3e7abf80 RCX: 00007fca3e67dda9
RDX: 00000000200005c0 RSI: 0000000050009417 RDI: 0000000000000003
RBP: 00007fca3e6ca47a R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 000000000000000b R14: 00007fca3e7abf80 R15: 00007fff6bf95658
</TASK>
Where we get an explicit message where we attempt to free an anonymous
device number that is not currently allocated. It happens in a different
code path from the example below, at btrfs_get_root_ref(), so this change
may not fix the case triggered by syzbot.
To fix at least the code path from the example above, change
btrfs_get_root_ref() and its callers to receive a dev_t pointer argument
for the anonymous device number, so that in case it frees the number, it
also resets it to 0, so that up in the call chain we don't attempt to do
the double free.
CC: stable@vger.kernel.org # 5.10+
Link: https://lore.kernel.org/linux-btrfs/000000000000f673a1061202f630@google.com/
Fixes: e03ee2fe87 ("btrfs: do not ASSERT() if the newly created subvolume already got read")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When FIEMAP_FLAG_SYNC is given to fiemap the expectation is that that
are no concurrent writes and we get a stable view of the inode's extent
layout.
When the flag is given we flush all IO (and wait for ordered extents to
complete) and then lock the inode in shared mode, however that leaves open
the possibility that a write might happen right after the flushing and
before locking the inode. So fix this by flushing again after locking the
inode - we leave the initial flushing before locking the inode to avoid
holding the lock and blocking other RO operations while waiting for IO
and ordered extents to complete. The second flushing while holding the
inode's lock will most of the time do nothing or very little since the
time window for new writes to have happened is small.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
For fiemap we recently stopped locking the target extent range for the
whole duration of the fiemap call, in order to avoid a deadlock in a
scenario where the fiemap buffer happens to be a memory mapped range of
the same file. This use case is very unlikely to be useful in practice but
it may be triggered by fuzz testing (syzbot, etc).
However by not locking the target extent range for the whole duration of
the fiemap call we can race with an ordered extent. This happens like
this:
1) The fiemap task finishes processing a file extent item that covers
the file range [512K, 1M[, and that file extent item is the last item
in the leaf currently being processed;
2) And ordered extent for the file range [768K, 2M[, in COW mode,
completes (btrfs_finish_one_ordered()) and the file extent item
covering the range [512K, 1M[ is trimmed to cover the range
[512K, 768K[ and then a new file extent item for the range [768K, 2M[
is inserted in the inode's subvolume tree;
3) The fiemap task calls fiemap_next_leaf_item(), which then calls
btrfs_next_leaf() to find the next leaf / item. This finds that the
the next key following the one we previously processed (its type is
BTRFS_EXTENT_DATA_KEY and its offset is 512K), is the key corresponding
to the new file extent item inserted by the ordered extent, which has
a type of BTRFS_EXTENT_DATA_KEY and an offset of 768K;
4) Later the fiemap code ends up at emit_fiemap_extent() and triggers
the warning:
if (cache->offset + cache->len > offset) {
WARN_ON(1);
return -EINVAL;
}
Since we get 1M > 768K, because the previously emitted entry for the
old extent covering the file range [512K, 1M[ ends at an offset that
is greater than the new extent's start offset (768K). This makes fiemap
fail with -EINVAL besides triggering the warning that produces a stack
trace like the following:
[1621.677651] ------------[ cut here ]------------
[1621.677656] WARNING: CPU: 1 PID: 204366 at fs/btrfs/extent_io.c:2492 emit_fiemap_extent+0x84/0x90 [btrfs]
[1621.677899] Modules linked in: btrfs blake2b_generic (...)
[1621.677951] CPU: 1 PID: 204366 Comm: pool Not tainted 6.8.0-rc5-btrfs-next-151+ #1
[1621.677954] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[1621.677956] RIP: 0010:emit_fiemap_extent+0x84/0x90 [btrfs]
[1621.678033] Code: 2b 4c 89 63 (...)
[1621.678035] RSP: 0018:ffffab16089ffd20 EFLAGS: 00010206
[1621.678037] RAX: 00000000004fa000 RBX: ffffab16089ffe08 RCX: 0000000000009000
[1621.678039] RDX: 00000000004f9000 RSI: 00000000004f1000 RDI: ffffab16089ffe90
[1621.678040] RBP: 00000000004f9000 R08: 0000000000001000 R09: 0000000000000000
[1621.678041] R10: 0000000000000000 R11: 0000000000001000 R12: 0000000041d78000
[1621.678043] R13: 0000000000001000 R14: 0000000000000000 R15: ffff9434f0b17850
[1621.678044] FS: 00007fa6e20006c0(0000) GS:ffff943bdfa40000(0000) knlGS:0000000000000000
[1621.678046] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[1621.678048] CR2: 00007fa6b0801000 CR3: 000000012d404002 CR4: 0000000000370ef0
[1621.678053] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[1621.678055] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[1621.678056] Call Trace:
[1621.678074] <TASK>
[1621.678076] ? __warn+0x80/0x130
[1621.678082] ? emit_fiemap_extent+0x84/0x90 [btrfs]
[1621.678159] ? report_bug+0x1f4/0x200
[1621.678164] ? handle_bug+0x42/0x70
[1621.678167] ? exc_invalid_op+0x14/0x70
[1621.678170] ? asm_exc_invalid_op+0x16/0x20
[1621.678178] ? emit_fiemap_extent+0x84/0x90 [btrfs]
[1621.678253] extent_fiemap+0x766/0xa30 [btrfs]
[1621.678339] btrfs_fiemap+0x45/0x80 [btrfs]
[1621.678420] do_vfs_ioctl+0x1e4/0x870
[1621.678431] __x64_sys_ioctl+0x6a/0xc0
[1621.678434] do_syscall_64+0x52/0x120
[1621.678445] entry_SYSCALL_64_after_hwframe+0x6e/0x76
There's also another case where before calling btrfs_next_leaf() we are
processing a hole or a prealloc extent and we had several delalloc ranges
within that hole or prealloc extent. In that case if the ordered extents
complete before we find the next key, we may end up finding an extent item
with an offset smaller than (or equals to) the offset in cache->offset.
So fix this by changing emit_fiemap_extent() to address these three
scenarios like this:
1) For the first case, steps listed above, adjust the length of the
previously cached extent so that it does not overlap with the current
extent, emit the previous one and cache the current file extent item;
2) For the second case where he had a hole or prealloc extent with
multiple delalloc ranges inside the hole or prealloc extent's range,
and the current file extent item has an offset that matches the offset
in the fiemap cache, just discard what we have in the fiemap cache and
assign the current file extent item to the cache, since it's more up
to date;
3) For the third case where he had a hole or prealloc extent with
multiple delalloc ranges inside the hole or prealloc extent's range
and the offset of the file extent item we just found is smaller than
what we have in the cache, just skip the current file extent item
if its range end at or behind the cached extent's end, because we may
have emitted (to the fiemap user space buffer) delalloc ranges that
overlap with the current file extent item's range. If the file extent
item's range goes beyond the end offset of the cached extent, just
emit the cached extent and cache a subrange of the file extent item,
that goes from the end offset of the cached extent to the end offset
of the file extent item.
Dealing with those cases in those ways makes everything consistent by
reflecting the current state of file extent items in the btree and
without emitting extents that have overlapping ranges (which would be
confusing and violating expectations).
This issue could be triggered often with test case generic/561, and was
also hit and reported by Wang Yugui.
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Link: https://lore.kernel.org/linux-btrfs/20240223104619.701F.409509F4@e16-tech.com/
Fixes: b0ad381fa7 ("btrfs: fix deadlock with fiemap and extent locking")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth, WiFi and netfilter.
We have one outstanding issue with the stmmac driver, which may be a
LOCKDEP false positive, not a blocker.
Current release - regressions:
- netfilter: nf_tables: re-allow NFPROTO_INET in
nft_(match/target)_validate()
- eth: ionic: fix error handling in PCI reset code
Current release - new code bugs:
- eth: stmmac: complete meta data only when enabled, fix null-deref
- kunit: fix again checksum tests on big endian CPUs
Previous releases - regressions:
- veth: try harder when allocating queue memory
- Bluetooth:
- hci_bcm4377: do not mark valid bd_addr as invalid
- hci_event: fix handling of HCI_EV_IO_CAPA_REQUEST
Previous releases - always broken:
- info leak in __skb_datagram_iter() on netlink socket
- mptcp:
- map v4 address to v6 when destroying subflow
- fix potential wake-up event loss due to sndbuf auto-tuning
- fix double-free on socket dismantle
- wifi: nl80211: reject iftype change with mesh ID change
- fix small out-of-bound read when validating netlink be16/32 types
- rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
- ipv6: fix potential "struct net" ref-leak in inet6_rtm_getaddr()
- ip_tunnel: prevent perpetual headroom growth with huge number of
tunnels on top of each other
- mctp: fix skb leaks on error paths of mctp_local_output()
- eth: ice: fixes for DPLL state reporting
- dpll: rely on rcu for netdev_dpll_pin() to prevent UaF
- eth: dpaa: accept phy-interface-type = '10gbase-r' in the device
tree"
* tag 'net-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
dpll: fix build failure due to rcu_dereference_check() on unknown type
kunit: Fix again checksum tests on big endian CPUs
tls: fix use-after-free on failed backlog decryption
tls: separate no-async decryption request handling from async
tls: fix peeking with sync+async decryption
tls: decrement decrypt_pending if no async completion will be called
gtp: fix use-after-free and null-ptr-deref in gtp_newlink()
net: hsr: Use correct offset for HSR TLV values in supervisory HSR frames
igb: extend PTP timestamp adjustments to i211
rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
tools: ynl: fix handling of multiple mcast groups
selftests: netfilter: add bridge conntrack + multicast test case
netfilter: bridge: confirm multicast packets before passing them up the stack
netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
Bluetooth: qca: Fix triggering coredump implementation
Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
Bluetooth: qca: Fix wrong event type for patch config command
Bluetooth: Enforce validation on max value of connection interval
Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
Bluetooth: mgmt: Fix limited discoverable off timeout
...
The update_cpumask(), checks for newly requested cpumask by calling
validate_change(), which returns an error on passing an invalid set
of cpu(s). Independent of the error returned, update_cpumask() always
returns zero, suppressing the error and returning success to the user
on writing an invalid cpu range for a cpuset. Fix it by returning
retval instead, which is returned by validate_change().
Fixes: 99fe36ba6f ("cgroup/cpuset: Improve temporary cpumasks handling")
Signed-off-by: Kamalesh Babulal <kamalesh.babulal@oracle.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Cc: stable@vger.kernel.org # v6.6+
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull Landlock fix from Mickaël Salaün:
"Fix a potential issue when handling inodes with inconsistent
properties"
* tag 'landlock-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Fix asymmetric private inodes referring
This reverts commit ce173474cf.
We cannot correctly deal with NAPOT mappings in vmalloc/vmap because if
some part of a NAPOT mapping is unmapped, the remaining mapping is not
updated accordingly. For example:
ptr = vmalloc_huge(64 * 1024, GFP_KERNEL);
vunmap_range((unsigned long)(ptr + PAGE_SIZE),
(unsigned long)(ptr + 64 * 1024));
leads to the following kernel page table dump:
0xffff8f8000ef0000-0xffff8f8000ef1000 0x00000001033c0000 4K PTE N .. .. D A G . . W R V
Meaning the first entry which was not unmapped still has the N bit set,
which, if accessed first and cached in the TLB, could allow access to the
unmapped range.
That's because the logic to break the NAPOT mapping does not exist and
likely won't. Indeed, to break a NAPOT mapping, we first have to clear
the whole mapping, flush the TLB and then set the new mapping ("break-
before-make" equivalent). That works fine in userspace since we can handle
any pagefault occurring on the remaining mapping but we can't handle a kernel
pagefault on such mapping.
So fix this by reverting the commit that introduced the vmap/vmalloc
support.
Fixes: ce173474cf ("riscv: mm: support Svnapot in huge vmap")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240227205016.121901-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Samuel Holland <samuel.holland@sifive.com> says:
This series fixes a couple of issues related to using the cbo.zero
instruction in userspace. The first patch fixes a bug where the wrong
enable bit gets set if the kernel is running in M-mode. The remaining
patches fix a bug where the enable bit gets reset to its default value
after a nonretentive idle state. I have hardware which reproduces this:
Before this series:
$ tools/testing/selftests/riscv/hwprobe/cbo
TAP version 13
1..3
ok 1 Zicboz block size
# Zicboz block size: 64
Illegal instruction
After applying this series:
$ tools/testing/selftests/riscv/hwprobe/cbo
TAP version 13
1..3
ok 1 Zicboz block size
# Zicboz block size: 64
ok 2 cbo.zero
ok 3 cbo.zero check
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
* b4-shazam-merge:
riscv: Save/restore envcfg CSR during CPU suspend
riscv: Add a custom ISA extension for the [ms]envcfg CSR
riscv: Fix enabling cbo.zero when running in M-mode
Link: https://lore.kernel.org/r/20240228065559.3434837-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The [ms]envcfg CSR was added in version 1.12 of the RISC-V privileged
ISA (aka S[ms]1p12). However, bits in this CSR are defined by several
other extensions which may be implemented separately from any particular
version of the privileged ISA (for example, some unrelated errata may
prevent an implementation from claiming conformance with Ss1p12). As a
result, Linux cannot simply use the privileged ISA version to determine
if the CSR is present. It must also check if any of these other
extensions are implemented. It also cannot probe the existence of the
CSR at runtime, because Linux does not require Sstrict, so (in the
absence of additional information) it cannot know if a CSR at that
address is [ms]envcfg or part of some non-conforming vendor extension.
Since there are several standard extensions that imply the existence of
the [ms]envcfg CSR, it becomes unwieldy to check for all of them
wherever the CSR is accessed. Instead, define a custom Xlinuxenvcfg ISA
extension bit that is implied by the other extensions and denotes that
the CSR exists as defined in the privileged ISA, containing at least one
of the fields common between menvcfg and senvcfg.
This extension does not need to be parsed from the devicetree or ISA
string because it can only be implemented as a subset of some other
standard extension.
Cc: <stable@vger.kernel.org> # v6.7+
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20240228065559.3434837-3-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Add myself as a maintainer for the various SiFive drivers, since I have
been performing cleanup activity on these drivers and reviewing patches
to them for a while now. Remove Palmer as a maintainer, as he is focused
on overall RISC-V architecture support.
Collapse some duplicate entries into the main SiFive drivers entry:
- Conor is already maintainer of standalone cache drivers as a whole,
and these files are also covered by the "sifive" file name regex.
- Paul's git tree has not been updated since 2018, and all file names
matching the "fu540" pattern also match the "sifive" pattern.
- Green has not been active on the LKML for a couple of years.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Acked-by: Paul Walmsley <paul.walmsley@sifive.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20240215234941.1663791-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- mgmt: Fix limited discoverable off timeout
- hci_qca: Set BDA quirk bit if fwnode exists in DT
- hci_bcm4377: do not mark valid bd_addr as invalid
- hci_sync: Check the correct flag before starting a scan
- Enforce validation on max value of connection interval
- hci_sync: Fix accept_list when attempting to suspend
- hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
- Avoid potential use-after-free in hci_error_reset
- rfcomm: Fix null-ptr-deref in rfcomm_check_security
- hci_event: Fix wrongly recorded wakeup BD_ADDR
- qca: Fix wrong event type for patch config command
- qca: Fix triggering coredump implementation
* tag 'for-net-2024-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: qca: Fix triggering coredump implementation
Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
Bluetooth: qca: Fix wrong event type for patch config command
Bluetooth: Enforce validation on max value of connection interval
Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
Bluetooth: mgmt: Fix limited discoverable off timeout
Bluetooth: hci_event: Fix wrongly recorded wakeup BD_ADDR
Bluetooth: rfcomm: Fix null-ptr-deref in rfcomm_check_security
Bluetooth: hci_sync: Fix accept_list when attempting to suspend
Bluetooth: Avoid potential use-after-free in hci_error_reset
Bluetooth: hci_sync: Check the correct flag before starting a scan
Bluetooth: hci_bcm4377: do not mark valid bd_addr as invalid
====================
Link: https://lore.kernel.org/r/20240228145644.2269088-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the decrypt request goes to the backlog and crypto_aead_decrypt
returns -EBUSY, tls_do_decryption will wait until all async
decryptions have completed. If one of them fails, tls_do_decryption
will return -EBADMSG and tls_decrypt_sg jumps to the error path,
releasing all the pages. But the pages have been passed to the async
callback, and have already been released by tls_decrypt_done.
The only true async case is when crypto_aead_decrypt returns
-EINPROGRESS. With -EBUSY, we already waited so we can tell
tls_sw_recvmsg that the data is available for immediate copy, but we
need to notify tls_decrypt_sg (via the new ->async_done flag) that the
memory has already been released.
Fixes: 8590541473 ("net: tls: handle backlogging of crypto requests")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/4755dd8d9bebdefaa19ce1439b833d6199d4364c.1709132643.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If we're not doing async, the handling is much simpler. There's no
reference counting, we just need to wait for the completion to wake us
up and return its result.
We should preferably also use a separate crypto_wait. I'm not seeing a
UAF as I did in the past, I think aec7961916 ("tls: fix race between
async notify and socket close") took care of it.
This will make the next fix easier.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/47bde5f649707610eaef9f0d679519966fc31061.1709132643.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If we peek from 2 records with a currently empty rx_list, and the
first record is decrypted synchronously but the second record is
decrypted async, the following happens:
1. decrypt record 1 (sync)
2. copy from record 1 to the userspace's msg
3. queue the decrypted record to rx_list for future read(!PEEK)
4. decrypt record 2 (async)
5. queue record 2 to rx_list
6. call process_rx_list to copy data from the 2nd record
We currently pass copied=0 as skip offset to process_rx_list, so we
end up copying once again from the first record. We should skip over
the data we've already copied.
Seen with selftest tls.12_aes_gcm.recv_peek_large_buf_mult_recs
Fixes: 692d7b5d1f ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/1b132d2b2b99296bfde54e8a67672d90d6d16e71.1709132643.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With mixed sync/async decryption, or failures of crypto_aead_decrypt,
we increment decrypt_pending but we never do the corresponding
decrement since tls_decrypt_done will not be called. In this case, we
should decrement decrypt_pending immediately to avoid getting stuck.
For example, the prequeue prequeue test gets stuck with mixed
modes (one async decrypt + one sync decrypt).
Fixes: 94524d8fc9 ("net/tls: Add support for async decryption of tls records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/c56d5fc35543891d5319f834f25622360e1bfbec.1709132643.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When resetting the bus after a gap count error, use a long rather than
short bus reset.
IEEE 1394-1995 uses only long bus resets. IEEE 1394a adds the option of
short bus resets. When video or audio transmission is in progress and a
device is hot-plugged elsewhere on the bus, the resulting bus reset can
cause video frame drops or audio dropouts. Short bus resets reduce or
eliminate this problem. Accordingly, short bus resets are almost always
preferred.
However, on a mixed 1394/1394a bus, a short bus reset can trigger an
immediate additional bus reset. This double bus reset can be interpreted
differently by different nodes on the bus, resulting in an inconsistent gap
count after the bus reset. An inconsistent gap count will cause another bus
reset, leading to a neverending bus reset loop. This only happens for some
bus topologies, not for all mixed 1394/1394a buses.
By instead sending a long bus reset after a gap count inconsistency, we
avoid the doubled bus reset, restoring the bus to normal operation.
Signed-off-by: Adam Goldman <adamg@pobox.com>
Link: https://sourceforge.net/p/linux1394/mailman/message/58741624/
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
Patch #1 restores NFPROTO_INET with nft_compat, from Ignat Korchagin.
Patch #2 fixes an issue with bridge netfilter and broadcast/multicast
packets.
There is a day 0 bug in br_netfilter when used with connection tracking.
Conntrack assumes that an nf_conn structure that is not yet added to
hash table ("unconfirmed"), is only visible by the current cpu that is
processing the sk_buff.
For bridge this isn't true, sk_buff can get cloned in between, and
clones can be processed in parallel on different cpu.
This patch disables NAT and conntrack helpers for multicast packets.
Patch #3 adds a selftest to cover for the br_netfilter bug.
netfilter pull request 24-02-29
* tag 'nf-24-02-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: add bridge conntrack + multicast test case
netfilter: bridge: confirm multicast packets before passing them up the stack
netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
====================
Link: https://lore.kernel.org/r/20240229000135.8780-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Current HSR implementation uses following supervisory frame (even for
HSRv1 the HSR tag is not is not present):
00000000: 01 15 4e 00 01 2d XX YY ZZ 94 77 10 88 fb 00 01
00000010: 7e 1c 17 06 XX YY ZZ 94 77 10 1e 06 XX YY ZZ 94
00000020: 77 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 00 00 00 00 00 00 00 00
The current code adds extra two bytes (i.e. sizeof(struct hsr_sup_tlv))
when offset for skb_pull() is calculated.
This is wrong, as both 'struct hsrv1_ethhdr_sp' and 'hsrv0_ethhdr_sp'
already have 'struct hsr_sup_tag' defined in them, so there is no need
for adding extra two bytes.
This code was working correctly as with no RedBox support, the check for
HSR_TLV_EOT (0x00) was off by two bytes, which were corresponding to
zeroed padded bytes for minimal packet size.
Fixes: eafaa88b3e ("net: hsr: Add support for redbox supervision frames")
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240228085644.3618044-1-lukma@denx.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
clang complains about a nonsensical test on builds with a 32-bit phys_addr_t,
which means resizing will always fail:
drivers/gpu/drm/xe/xe_mmio.c:109:23: error: result of comparison of constant 4294967296 with expression of type 'resource_size_t' (aka 'unsigned int') is always false [-Werror,-Wtautological-constant-out-of-range-compare]
109 | root_res->start > 0x100000000ull)
| ~~~~~~~~~~~~~~~ ^ ~~~~~~~~~~~~~~
Previously, BAR resize was always disallowed on 32-bit kernels, but
this apparently changed recently. Since 32-bit machines can in theory
support PAE/LPAE for large address spaces, this may end up useful,
so change the driver to shut up the warning but still work when
phys_addr_t/resource_size_t is 64 bit wide.
Fixes: 9a6e6c14bf ("drm/xe/mmio: Use non-atomic writeq/readq variant for 32b")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226124736.1272949-2-arnd@kernel.org
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit f5d3983366)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Mesa has been issuing a single bind operation per ioctl since xe.ko
changed to GPUVA due xe.ko bug #746. If I change Mesa to try again to
issue every single bind operation it can in the same ioctl, it hits
the MAX_BINDS assertion when running Vulkan conformance tests.
Test dEQP-VK.sparse_resources.transfer_queue.3d.rgba32i.1024_128_8
issues 960 bind operations in a single ioctl, it's the most I could
find in the conformance suite.
I don't see a reason to keep the MAX_BINDS restriction: it doesn't
seem to be preventing any specific issue. If the number is too big for
the memory allocations, then those will fail. Nothing related to
num_binds seems to be using the stack. Let's just get rid of it.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Testcase: dEQP-VK.sparse_resources.transfer_queue.3d.rgba32i.1024_128_8
References: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/746
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240215005353.1295420-1-paulo.r.zanoni@intel.com
(cherry picked from commit ba6bbdc6ea)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Those cases missed in previous uAPI cleanups were mostly accidentally
brought in from i915 or created to exercise the possibilities of gpuvm
but they are not used by userspace yet, so let's remove them. They can
still be brought back later if needed.
v2:
- Fix XE_VM_FLAG_FAULT_MODE support in xe_lrc.c (Brian Welty)
- Leave DRM_XE_VM_BIND_OP_UNMAP_ALL (José Roberto de Souza)
- Ensure invalid flag values are rejected (Rodrigo Vivi)
v3: Rebase after removal of persistent exec_queues (Francois Dugast)
v4: Rodrigo: Rebase after the new dumpable flag.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222232356.175431-1-rodrigo.vivi@intel.com
(cherry picked from commit 84a1ed5e67)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
ASoC: Fixes for v6.8
A few small fixes, some driver specific and one slightly larger one
from Richard which adds a new core helper and updates a small clutch of
drivers to deal with the fact that they were using a helper which
requires that the lock for the list of controls without holding that
lock. We also have some quirks for new AMD based Lenovo systems.
In the commit d73ef2d69c ("rtnetlink: let rtnl_bridge_setlink checks
IFLA_BRIDGE_MODE length"), an adjustment was made to the old loop logic
in the function `rtnl_bridge_setlink` to enable the loop to also check
the length of the IFLA_BRIDGE_MODE attribute. However, this adjustment
removed the `break` statement and led to an error logic of the flags
writing back at the end of this function.
if (have_flags)
memcpy(nla_data(attr), &flags, sizeof(flags));
// attr should point to IFLA_BRIDGE_FLAGS NLA !!!
Before the mentioned commit, the `attr` is granted to be IFLA_BRIDGE_FLAGS.
However, this is not necessarily true fow now as the updated loop will let
the attr point to the last NLA, even an invalid NLA which could cause
overflow writes.
This patch introduces a new variable `br_flag` to save the NLA pointer
that points to IFLA_BRIDGE_FLAGS and uses it to resolve the mentioned
error logic.
Fixes: d73ef2d69c ("rtnetlink: let rtnl_bridge_setlink checks IFLA_BRIDGE_MODE length")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240227121128.608110-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We never increment the group number iterator, so all groups
get recorded into index 0 of the mcast_groups[] array.
As a result YNL can only handle using the last group.
For example using the "netdev" sample on kernel with
page pool commands results in:
$ ./samples/netdev
YNL: Multicast group 'mgmt' not found
Most families have only one multicast group, so this hasn't
been noticed. Plus perhaps developers usually test the last
group which would have worked.
Fixes: 86878f14d7 ("tools: ynl: user space helpers")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240226214019.1255242-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add test case for multicast packet confirm race.
Without preceding patch, this should result in:
WARNING: CPU: 0 PID: 38 at net/netfilter/nf_conntrack_core.c:1198 __nf_conntrack_confirm+0x3ed/0x5f0
Workqueue: events_unbound macvlan_process_broadcast
RIP: 0010:__nf_conntrack_confirm+0x3ed/0x5f0
? __nf_conntrack_confirm+0x3ed/0x5f0
nf_confirm+0x2ad/0x2d0
nf_hook_slow+0x36/0xd0
ip_local_deliver+0xce/0x110
__netif_receive_skb_one_core+0x4f/0x70
process_backlog+0x8c/0x130
[..]
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
conntrack nf_confirm logic cannot handle cloned skbs referencing
the same nf_conn entry, which will happen for multicast (broadcast)
frames on bridges.
Example:
macvlan0
|
br0
/ \
ethX ethY
ethX (or Y) receives a L2 multicast or broadcast packet containing
an IP packet, flow is not yet in conntrack table.
1. skb passes through bridge and fake-ip (br_netfilter)Prerouting.
-> skb->_nfct now references a unconfirmed entry
2. skb is broad/mcast packet. bridge now passes clones out on each bridge
interface.
3. skb gets passed up the stack.
4. In macvlan case, macvlan driver retains clone(s) of the mcast skb
and schedules a work queue to send them out on the lower devices.
The clone skb->_nfct is not a copy, it is the same entry as the
original skb. The macvlan rx handler then returns RX_HANDLER_PASS.
5. Normal conntrack hooks (in NF_INET_LOCAL_IN) confirm the orig skb.
The Macvlan broadcast worker and normal confirm path will race.
This race will not happen if step 2 already confirmed a clone. In that
case later steps perform skb_clone() with skb->_nfct already confirmed (in
hash table). This works fine.
But such confirmation won't happen when eb/ip/nftables rules dropped the
packets before they reached the nf_confirm step in postrouting.
Pablo points out that nf_conntrack_bridge doesn't allow use of stateful
nat, so we can safely discard the nf_conn entry and let inet call
conntrack again.
This doesn't work for bridge netfilter: skb could have a nat
transformation. Also bridge nf prevents re-invocation of inet prerouting
via 'sabotage_in' hook.
Work around this problem by explicit confirmation of the entry at LOCAL_IN
time, before upper layer has a chance to clone the unconfirmed entry.
The downside is that this disables NAT and conntrack helpers.
Alternative fix would be to add locking to all code parts that deal with
unconfirmed packets, but even if that could be done in a sane way this
opens up other problems, for example:
-m physdev --physdev-out eth0 -j SNAT --snat-to 1.2.3.4
-m physdev --physdev-out eth1 -j SNAT --snat-to 1.2.3.5
For multicast case, only one of such conflicting mappings will be
created, conntrack only handles 1:1 NAT mappings.
Users should set create a setup that explicitly marks such traffic
NOTRACK (conntrack bypass) to avoid this, but we cannot auto-bypass
them, ruleset might have accept rules for untracked traffic already,
so user-visible behaviour would change.
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217777
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Commit d0009effa8 ("netfilter: nf_tables: validate NFPROTO_* family") added
some validation of NFPROTO_* families in the nft_compat module, but it broke
the ability to use legacy iptables modules in dual-stack nftables.
While with legacy iptables one had to independently manage IPv4 and IPv6
tables, with nftables it is possible to have dual-stack tables sharing the
rules. Moreover, it was possible to use rules based on legacy iptables
match/target modules in dual-stack nftables.
As an example, the program from [2] creates an INET dual-stack family table
using an xt_bpf based rule, which looks like the following (the actual output
was generated with a patched nft tool as the current nft tool does not parse
dual stack tables with legacy match rules, so consider it for illustrative
purposes only):
table inet testfw {
chain input {
type filter hook prerouting priority filter; policy accept;
bytecode counter packets 0 bytes 0 accept
}
}
After d0009effa8 ("netfilter: nf_tables: validate NFPROTO_* family") we get
EOPNOTSUPP for the above program.
Fix this by allowing NFPROTO_INET for nft_(match/target)_validate(), but also
restrict the functions to classic iptables hooks.
Changes in v3:
* clarify that upstream nft will not display such configuration properly and
that the output was generated with a patched nft tool
* remove example program from commit description and link to it instead
* no code changes otherwise
Changes in v2:
* restrict nft_(match/target)_validate() to classic iptables hooks
* rewrite example program to use unmodified libnftnl
Fixes: d0009effa8 ("netfilter: nf_tables: validate NFPROTO_* family")
Link: https://lore.kernel.org/all/Zc1PfoWN38UuFJRI@calendula/T/#mc947262582c90fec044c7a3398cc92fac7afea72 [1]
Link: https://lore.kernel.org/all/20240220145509.53357-1-ignat@cloudflare.com/ [2]
Reported-by: Jordan Griege <jgriege@cloudflare.com>
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull ACPI fix from Rafael Wysocki:
"Revert a recent EC driver change that introduced an unexpected and
undesirable user-visible difference in behavior (Rafael Wysocki)"
* tag 'acpi-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI: EC: Use a spin lock without disabing interrupts"
Pull power management fix from Rafael Wysocki:
"Fix a latent bug in the intel-pstate cpufreq driver that has been
exposed by the recent schedutil governor changes (Doug Smythies)"
* tag 'pm-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: fix pstate limits enforcement for adjust_perf call back
Pull spi fixes from Mark Brown:
"There's two things here - the big one is a batch of fixes for the
power management in the Cadence QuadSPI driver which had some serious
issues with runtime PM and there's also a revert of one of the last
batch of fixes for ppc4xx which has a dependency on -next but was in
between two mainline fixes so the -next dependency got missed.
The ppc4xx driver is not currently included in any defconfig and has
dependencies that exclude it from allmodconfigs so none of the CI
systems catch issues with it, hence the need for the earlier fixes
series. There's some updates to the PowerPC configs to address this"
* tag 'spi-fix-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Drop mismerged fix
spi: cadence-qspi: add system-wide suspend and resume callbacks
spi: cadence-qspi: put runtime in runtime PM hooks names
spi: cadence-qspi: remove system-wide suspend helper calls from runtime PM hooks
spi: cadence-qspi: fix pointer reference in runtime PM hooks
Pull regulator fixes from Mark Brown:
"Two small fixes, one small update for the max5970 driver bringing the
driver and DT binding documentation into sync plus a missed update to
the patterns in MAINTAINERS after a DT binding YAML conversion"
* tag 'regulator-fix-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: max5970: Fix regulator child node name
MAINTAINERS: repair entry for MICROCHIP MCP16502 PMIC DRIVER
Pull crypto fixes from Herbert Xu:
"This fixes a regression in lskcipher and an out-of-bound access
in arm64/neonbs"
* tag 'v6.8-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: arm64/neonbs - fix out-of-bounds access on short input
crypto: lskcipher - Copy IV in lskcipher glue code always
Commit 'e3e56c050ab6 ("soc: qcom: rpmhpd: Make power_on actually enable
the domain")' aimed to make sure that a power-domain that is being
enabled without any particular performance-state requested will at least
turn the rail on, to avoid filling DeviceTree with otherwise unnecessary
required-opps properties.
But in the event that aggregation happens on a disabled power-domain, with
an enabled peer without performance-state, both the local and peer
corner are 0. The peer's enabled_corner is not considered, with the
result that the underlying (shared) resource is disabled.
One case where this can be observed is when the display stack keeps mmcx
enabled (but without a particular performance-state vote) in order to
access registers and sync_state happens in the rpmhpd driver. As mmcx_ao
is flushed the state of the peer (mmcx) is not considered and mmcx_ao
ends up turning off "mmcx.lvl" underneath mmcx. This has been observed
several times, but has been painted over in DeviceTree by adding an
explicit vote for the lowest non-disabled performance-state.
Fixes: e3e56c050a ("soc: qcom: rpmhpd: Make power_on actually enable the domain")
Reported-by: Johan Hovold <johan@kernel.org>
Closes: https://lore.kernel.org/linux-arm-msm/ZdMwZa98L23mu3u6@hovoldconsulting.com/
Cc: <stable@vger.kernel.org>
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240226-rpmhpd-enable-corner-fix-v1-1-68c004cec48c@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
hci_coredump_qca() uses __hci_cmd_sync() to send a vendor-specific command
to trigger firmware coredump, but the command does not have any event as
its sync response, so it is not suitable to use __hci_cmd_sync(), fixed by
using __hci_cmd_send().
Fixes: 06d3fdfcdf ("Bluetooth: hci_qca: Add qcom devcoredump support")
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BT adapter going into UNCONFIGURED state during BT turn ON when
devicetree has no local-bd-address node.
Bluetooth will not work out of the box on such devices, to avoid this
problem, added check to set HCI_QUIRK_USE_BDADDR_PROPERTY based on
local-bd-address node entry.
When this quirk is not set, the public Bluetooth address read by host
from controller though HCI Read BD Address command is
considered as valid.
Fixes: e668eb1e15 ("Bluetooth: hci_core: Don't stop BT if the BD address missing in dts")
Signed-off-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Right now Linux BT stack cannot pass test case "GAP/CONN/CPUP/BV-05-C
'Connection Parameter Update Procedure Invalid Parameters Central
Responder'" in Bluetooth Test Suite revision GAP.TS.p44. [0]
That was revoled by commit c49a8682fc ("Bluetooth: validate BLE
connection interval updates"), but later got reverted due to devices
like keyboards and mice may require low connection interval.
So only validate the max value connection interval to pass the Test
Suite, and let devices to request low connection interval if needed.
[0] https://www.bluetooth.org/docman/handlers/DownloadDoc.ashx?doc_id=229869
Fixes: 68d19d7d99 ("Revert "Bluetooth: validate BLE connection interval updates"")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
LIMITED_DISCOVERABLE flag is not reset from Class of Device and
advertisement on limited discoverable timeout. This prevents to pass PTS
test GAP/DISC/LIMM/BV-02-C
Calling set_discoverable_sync as when the limited discovery is set
correctly update the Class of Device and advertisement.
Signed-off-by: Frédéric Danis <frederic.danis@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_store_wake_reason() wrongly parses event HCI_Connection_Request
as HCI_Connection_Complete and HCI_Connection_Complete as
HCI_Connection_Request, so causes recording wakeup BD_ADDR error and
potential stability issue, fix it by using the correct field.
Fixes: 2f20216c1d ("Bluetooth: Emit controller suspend and resume events")
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
During our fuzz testing of the connection and disconnection process at the
RFCOMM layer, we discovered this bug. By comparing the packets from a
normal connection and disconnection process with the testcase that
triggered a KASAN report. We analyzed the cause of this bug as follows:
1. In the packets captured during a normal connection, the host sends a
`Read Encryption Key Size` type of `HCI_CMD` packet
(Command Opcode: 0x1408) to the controller to inquire the length of
encryption key.After receiving this packet, the controller immediately
replies with a Command Completepacket (Event Code: 0x0e) to return the
Encryption Key Size.
2. In our fuzz test case, the timing of the controller's response to this
packet was delayed to an unexpected point: after the RFCOMM and L2CAP
layers had disconnected but before the HCI layer had disconnected.
3. After receiving the Encryption Key Size Response at the time described
in point 2, the host still called the rfcomm_check_security function.
However, by this time `struct l2cap_conn *conn = l2cap_pi(sk)->chan->conn;`
had already been released, and when the function executed
`return hci_conn_security(conn->hcon, d->sec_level, auth_type, d->out);`,
specifically when accessing `conn->hcon`, a null-ptr-deref error occurred.
To fix this bug, check if `sk->sk_state` is BT_CLOSED before calling
rfcomm_recv_frame in rfcomm_process_rx.
Signed-off-by: Yuxuan Hu <20373622@buaa.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
During suspend, only wakeable devices can be in acceptlist, so if the
device was previously added it needs to be removed otherwise the device
can end up waking up the system prematurely.
Fixes: 3b42055388 ("Bluetooth: hci_sync: Fix attempting to suspend with unfiltered passive scan")
Signed-off-by: Clancy Shang <clancy.shang@quectel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
While handling the HCI_EV_HARDWARE_ERROR event, if the underlying
BT controller is not responding, the GPIO reset mechanism would
free the hci_dev and lead to a use-after-free in hci_error_reset.
Here's the call trace observed on a ChromeOS device with Intel AX201:
queue_work_on+0x3e/0x6c
__hci_cmd_sync_sk+0x2ee/0x4c0 [bluetooth <HASH:3b4a6>]
? init_wait_entry+0x31/0x31
__hci_cmd_sync+0x16/0x20 [bluetooth <HASH:3b4a 6>]
hci_error_reset+0x4f/0xa4 [bluetooth <HASH:3b4a 6>]
process_one_work+0x1d8/0x33f
worker_thread+0x21b/0x373
kthread+0x13a/0x152
? pr_cont_work+0x54/0x54
? kthread_blkcg+0x31/0x31
ret_from_fork+0x1f/0x30
This patch holds the reference count on the hci_dev while processing
a HCI_EV_HARDWARE_ERROR event to avoid potential crash.
Fixes: c7741d16a5 ("Bluetooth: Perform a power cycle when receiving hardware error event")
Signed-off-by: Ying Hsu <yinghsu@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There's a very confusing mistake in the code starting a HCI inquiry: We're
calling hci_dev_test_flag() to test for HCI_INQUIRY, but hci_dev_test_flag()
checks hdev->dev_flags instead of hdev->flags. HCI_INQUIRY is a bit that's
set on hdev->flags, not on hdev->dev_flags though.
HCI_INQUIRY equals the integer 7, and in hdev->dev_flags, 7 means
HCI_BONDABLE, so we were actually checking for HCI_BONDABLE here.
The mistake is only present in the synchronous code for starting an inquiry,
not in the async one. Also devices are typically bondable while doing an
inquiry, so that might be the reason why nobody noticed it so far.
Fixes: abfeea476c ("Bluetooth: hci_sync: Convert MGMT_OP_START_DISCOVERY")
Signed-off-by: Jonas Dreßler <verdre@v0yd.nl>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
A recent commit restored the original (and still documented) semantics
for the HCI_QUIRK_USE_BDADDR_PROPERTY quirk so that the device address
is considered invalid unless an address is provided by firmware.
This specifically means that this flag must only be set for devices with
invalid addresses, but the Broadcom BCM4377 driver has so far been
setting this flag unconditionally.
Fortunately the driver already checks for invalid addresses during setup
and sets the HCI_QUIRK_INVALID_BDADDR flag, which can simply be replaced
with HCI_QUIRK_USE_BDADDR_PROPERTY to indicate that the default address
is invalid but can be overridden by firmware (long term, this should
probably just always be allowed).
Fixes: 6945795bc8 ("Bluetooth: fix use-bdaddr-property quirk")
Cc: stable@vger.kernel.org # 6.5
Reported-by: Felix Zhang <mrman@mrman314.tech>
Link: https://lore.kernel.org/r/77419ffacc5b4875e920e038332575a2a5bff29f.camel@mrman314.tech/
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reported-by: Felix Zhang <mrman@mrman314.tech>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
AC5X spec says PHY init complete bit must be polled until zero.
We see cases in which timeout can take longer than the standard
calculation on AC5X, which is expected following the spec comment above.
According to the spec, we must wait as long as it takes for that bit to
toggle on AC5X.
Cap that with 100 delay loops so we won't get stuck forever.
Fixes: 06c8b667ff ("mmc: sdhci-xenon: Add support to PHYs of Marvell Xenon SDHC")
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Elad Nachman <enachman@marvell.com>
Link: https://lore.kernel.org/r/20240222191714.1216470-3-enachman@marvell.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The fast path usage breakdown describes the detail for 'inet_sock', fix
the markup title.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently when suspending driver and stopping workqueue it is checked whether
workqueue is not NULL and if so, it is destroyed.
Function destroy_workqueue() does drain queue and does clear variable, but
it does not set workqueue variable to NULL. This can cause kernel/module
panic if code attempts to clear workqueue that was not initialized.
This scenario is possible when resuming suspended driver in stmmac_resume(),
because there is no handling for failed stmmac_hw_setup(),
which can fail and return if DMA engine has failed to initialize,
and workqueue is initialized after DMA engine.
Should DMA engine fail to initialize, resume will proceed normally,
but interface won't work and TX queue will eventually timeout,
causing 'Reset adapter' error.
This then does destroy workqueue during reset process.
And since workqueue is initialized after DMA engine and can be skipped,
it will cause kernel/module panic.
To secure against this possible crash, set workqueue variable to NULL when
destroying workqueue.
Log/backtrace from crash goes as follows:
[88.031977]------------[ cut here ]------------
[88.031985]NETDEV WATCHDOG: eth0 (sxgmac): transmit queue 1 timed out
[88.032017]WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:477 dev_watchdog+0x390/0x398
<Skipping backtrace for watchdog timeout>
[88.032251]---[ end trace e70de432e4d5c2c0 ]---
[88.032282]sxgmac 16d88000.ethernet eth0: Reset adapter.
[88.036359]------------[ cut here ]------------
[88.036519]Call trace:
[88.036523] flush_workqueue+0x3e4/0x430
[88.036528] drain_workqueue+0xc4/0x160
[88.036533] destroy_workqueue+0x40/0x270
[88.036537] stmmac_fpe_stop_wq+0x4c/0x70
[88.036541] stmmac_release+0x278/0x280
[88.036546] __dev_close_many+0xcc/0x158
[88.036551] dev_close_many+0xbc/0x190
[88.036555] dev_close.part.0+0x70/0xc0
[88.036560] dev_close+0x24/0x30
[88.036564] stmmac_service_task+0x110/0x140
[88.036569] process_one_work+0x1d8/0x4a0
[88.036573] worker_thread+0x54/0x408
[88.036578] kthread+0x164/0x170
[88.036583] ret_from_fork+0x10/0x20
[88.036588]---[ end trace e70de432e4d5c2c1 ]---
[88.036597]Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004
Fixes: 5a5586112b ("net: stmmac: support FPE link partner hand-shaking procedure")
Signed-off-by: Jakub Raczynski <j.raczynski@samsung.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sun8i_ce_cipher_unprepare should be called before
crypto_finalize_skcipher_request, because client callbacks may
immediately free memory, that isn't needed anymore. But it will be
used by unprepare after free. Before removing prepare/unprepare
callbacks it was handled by crypto engine in crypto_finalize_request.
Usually that results in a pointer dereference problem during a in
crypto selftest.
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000030
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=000000004716d000
[0000000000000030] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
This problem is detected by KASAN as well.
==================================================================
BUG: KASAN: slab-use-after-free in sun8i_ce_cipher_do_one+0x6e8/0xf80 [sun8i_ce]
Read of size 8 at addr ffff00000dcdc040 by task 1c15000.crypto-/373
Hardware name: Pine64 PinePhone (1.2) (DT)
Call trace:
dump_backtrace+0x9c/0x128
show_stack+0x20/0x38
dump_stack_lvl+0x48/0x60
print_report+0xf8/0x5d8
kasan_report+0x90/0xd0
__asan_load8+0x9c/0xc0
sun8i_ce_cipher_do_one+0x6e8/0xf80 [sun8i_ce]
crypto_pump_work+0x354/0x620 [crypto_engine]
kthread_worker_fn+0x244/0x498
kthread+0x168/0x178
ret_from_fork+0x10/0x20
Allocated by task 379:
kasan_save_stack+0x3c/0x68
kasan_set_track+0x2c/0x40
kasan_save_alloc_info+0x24/0x38
__kasan_kmalloc+0xd4/0xd8
__kmalloc+0x74/0x1d0
alg_test_skcipher+0x90/0x1f0
alg_test+0x24c/0x830
cryptomgr_test+0x38/0x60
kthread+0x168/0x178
ret_from_fork+0x10/0x20
Freed by task 379:
kasan_save_stack+0x3c/0x68
kasan_set_track+0x2c/0x40
kasan_save_free_info+0x38/0x60
__kasan_slab_free+0x100/0x170
slab_free_freelist_hook+0xd4/0x1e8
__kmem_cache_free+0x15c/0x290
kfree+0x74/0x100
kfree_sensitive+0x80/0xb0
alg_test_skcipher+0x12c/0x1f0
alg_test+0x24c/0x830
cryptomgr_test+0x38/0x60
kthread+0x168/0x178
ret_from_fork+0x10/0x20
The buggy address belongs to the object at ffff00000dcdc000
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 64 bytes inside of
freed 256-byte region [ffff00000dcdc000, ffff00000dcdc100)
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Fixes: 4136212ab1 ("crypto: sun8i-ce - Remove prepare/unprepare request")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Kalle Valo says:
====================
wireless fixes for v6.8-rc7
Few remaining fixes, hopefully the last wireless pull request to v6.8.
Two fixes to the stack and two to iwlwifi but no high priority fixes
this time.
* tag 'wireless-2024-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: only call drv_sta_rc_update for uploaded stations
MAINTAINERS: wifi: Add N: ath1*k entries to match .yaml files
MAINTAINERS: wifi: update Jeff Johnson e-mail address
wifi: iwlwifi: mvm: fix the TXF mapping for BZ devices
wifi: iwlwifi: mvm: ensure offloading TID queue exists
wifi: nl80211: reject iftype change with mesh ID change
====================
Link: https://lore.kernel.org/r/20240227135751.C5EC6C43390@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently using plain XDP/ZC sockets on stmmac results in a kernel crash:
|[ 255.822584] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
|[...]
|[ 255.822764] Call trace:
|[ 255.822766] stmmac_tx_clean.constprop.0+0x848/0xc38
The program counter indicates xsk_tx_metadata_complete(). It works on
compl->tx_timestamp, which is not set by xsk_tx_metadata_to_compl() due to
missing meta data. Therefore, call xsk_tx_metadata_complete() only when
meta data is actually used.
Tested on imx93 without XDP, with XDP and with XDP/ZC.
Fixes: 1347b41931 ("net: stmmac: Add Tx HWTS support to XDP ZC")
Suggested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/netdev/87r0h7wg8u.fsf@kurt.kurt.home/
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Link: https://lore.kernel.org/r/20240222-stmmac_xdp-v2-1-4beee3a037e4@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MII code does not check the return value of mdio_read (among
others), and therefore no error code should be sent. A previous fix to
the use of an uninitialized variable propagates negative error codes,
that might lead to wrong operations by the MII library.
An example of such issues is the use of mii_nway_restart by the dm9601
driver. The mii_nway_restart function does not check the value returned
by mdio_read, which in this case might be a negative number which could
contain the exact bit the function checks (BMCR_ANENABLE = 0x1000).
Return zero in case of error, as it is common practice in users of
mdio_read to avoid wrong uses of the return value.
Fixes: 8f8abb863f ("net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Peter Korsgaard <peter@korsgaard.com>
Link: https://lore.kernel.org/r/20240225-dm9601_ret_err-v1-1-02c1d959ea59@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull lsm fixes from Paul Moore:
"Two small patches, one for AppArmor and one for SELinux, to fix
potential uninitialized variable problems in the new LSM syscalls we
added during the v6.8 merge window.
We haven't been able to get a response from John on the AppArmor
patch, but considering both the importance of the patch and it's
rather simple nature it seems like a good idea to get this merged
sooner rather than later.
I'm sure John is just taking some much needed vacation; if we need to
revise this when he gets back to his email we can"
* tag 'lsm-pr-20240227' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
apparmor: fix lsm_get_self_attr()
selinux: fix lsm_get_self_attr()
Pull misc fixes from Andrew Morton:
"Six hotfixes. Three are cc:stable and the remainder address post-6.7
issues or aren't considered appropriate for backporting"
* tag 'mm-hotfixes-stable-2024-02-27-14-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/debug_vm_pgtable: fix BUG_ON with pud advanced test
mm: cachestat: fix folio read-after-free in cache walk
MAINTAINERS: add memory mapping entry with reviewers
mm/vmscan: fix a bug calling wakeup_kswapd() with a wrong zone index
kasan: revert eviction of stack traces in generic mode
stackdepot: use variable size records for non-evictable entries
Currently, GPU resets can now be performed successfully on the Raven
series. While GPU reset is required for the S3 suspend abort case.
So now can enable gpu reset for S3 abort cases on the Raven series.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds a check in the map_hw_resources function to prevent a potential
buffer overflow. The function was accessing arrays using an index that
could potentially be greater than the size of the arrays, leading to a
buffer overflow.
Adds a check to ensure that the index is within the bounds of the
arrays. If the index is out of bounds, an error message is printed and
break it will continue execution with just ignoring extra data early to
prevent the buffer overflow.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:79 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_stream_id' 6 <= 7
drivers/gpu/drm/amd/amdgpu/../display/dc/dml2/dml2_wrapper.c:81 map_hw_resources() error: buffer overflow 'dml2->v20.scratch.dml_to_dc_pipe_mapping.disp_cfg_to_plane_id' 6 <= 7
Fixes: 7966f319c6 ("drm/amd/display: Introduce DML2")
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Roman Li <roman.li@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
One patch of a series of three that was sent fixing issues with the
ppc4xx driver was targeted at -next, unfortunately it being sandwiched
between two others that targeted mainline tripped up my workflow and
caused it to get merged along with the others. The ppc4xx driver is
only buildable in very limited configurations so none of the CI catches
issues with it.
Fixes: de4af897dd ("spi: ppc4xx: Fix fallout from rename in struct spi_bitbang")
Signed-off-by: Mark Brown <broonie@kernel.org>
When rebuilding the lif after an FLR, be sure to restore the
current netdev features, not do the usual first time feature
init. This prevents losing user changes to things like TSO
or vlan tagging states.
Fixes: 45b84188a0 ("ionic: keep filters across FLR")
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since we now have potential cases of NULL cmd_regs and info_regs
during a reset recovery, and left NULL if a reset recovery has
failed, we need to check that they exist before we use them.
Most of the cases were covered in the original patch where we
verify before doing the ioreadb() for health or cmd status.
However, we need to protect a few uses of io mem that could
be hit in error recovery or asynchronous threads calls as well
(e.g. ethtool or devlink handlers).
Fixes: 219e183272 ("ionic: no fw read when PCI reset failed")
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
AER recovery handler can trigger a PCI Reset after tearing
down the device setup in the error detection handler. The PCI
Reset handler will also attempt to tear down the device setup,
and this second tear down needs to know that it doesn't need
to call pci_release_regions() a second time. We can clear
num_bars on tear down and use that to decide later if we need
to clear the resources. This prevents a harmless but disturbing
warning message
resource: Trying to free nonexistent resource <0xXXXXXXXXXX-0xXXXXXXXXXX>
Fixes: c3a910e1c4 ("ionic: fill out pci error handlers")
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If a directory has a block with only ".__afsXXXX" files in it (from
uncompleted silly-rename), these .__afsXXXX files are skipped but without
advancing the file position in the dir_context. This leads to
afs_dir_iterate() repeating the block again and again.
Fix this by making the code that skips the .__afsXXXX file also manually
advance the file position.
The symptoms are a soft lookup:
watchdog: BUG: soft lockup - CPU#3 stuck for 52s! [check:5737]
...
RIP: 0010:afs_dir_iterate_block+0x39/0x1fd
...
? watchdog_timer_fn+0x1a6/0x213
...
? asm_sysvec_apic_timer_interrupt+0x16/0x20
? afs_dir_iterate_block+0x39/0x1fd
afs_dir_iterate+0x10a/0x148
afs_readdir+0x30/0x4a
iterate_dir+0x93/0xd3
__do_sys_getdents64+0x6b/0xd4
This is almost certainly the actual fix for:
https://bugzilla.kernel.org/show_bug.cgi?id=218496
Fixes: 57e9d49c54 ("afs: Hide silly-rename files from userspace")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/786185.1708694102@warthog.procyon.org.uk
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Markus Suvanto <markus.suvanto@gmail.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Matthieu Baerts says:
====================
mptcp: more misc. fixes for v6.8
This series includes 6 types of fixes:
- Patch 1 fixes v4 mapped in v6 addresses support for the userspace PM,
when asking to delete a subflow. It was done everywhere else, but not
there. Patch 2 validates the modification, thanks to a subtest in
mptcp_join.sh. These patches can be backported up to v5.19.
- Patch 3 is a small fix for a recent bug-fix patch, just to avoid
printing an irrelevant warning (pr_warn()) once. It can be backported
up to v5.6, alongside the bug-fix that has been introduced in the
v6.8-rc5.
- Patches 4 to 6 are fixes for bugs found by Paolo while working on
TCP_NOTSENT_LOWAT support for MPTCP. These fixes can improve the
performances in some cases. Patches can be backported up to v5.6,
v5.11 and v6.7 respectively.
- Patch 7 makes sure 'ss -M' is available when starting MPTCP Join
selftest as it is required for some subtests since v5.18.
- Patch 8 fixes a possible double-free on socket dismantle. The issue
always existed, but was unnoticed because it was not causing any
problem so far. This fix can be backported up to v5.6.
- Patch 9 is a fix for a very recent patch causing lockdep warnings in
subflow diag. The patch causing the regression -- which fixes another
issue present since v5.7 -- should be part of the future v6.8-rc6.
Patch 10 validates the modification, thanks to a new subtest in
diag.sh.
====================
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-0-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mptcp diag interface already experienced a few locking bugs
that lockdep and appropriate coverage have detected in advance.
Let's add a test-case triggering the relevant code path, to prevent
similar issues in the future.
Be careful to cope with very slow environments.
Note that we don't need an explicit timeout on the mptcp_connect
subprocess to cope with eventual bug/hang-up as the final cleanup
terminating the child processes will take care of that.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-10-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
when MPTCP server accepts an incoming connection, it clones its listener
socket. However, the pointer to 'inet_opt' for the new socket has the same
value as the original one: as a consequence, on program exit it's possible
to observe the following splat:
BUG: KASAN: double-free in inet_sock_destruct+0x54f/0x8b0
Free of addr ffff888485950880 by task swapper/25/0
CPU: 25 PID: 0 Comm: swapper/25 Kdump: loaded Not tainted 6.8.0-rc1+ #609
Hardware name: Supermicro SYS-6027R-72RF/X9DRH-7TF/7F/iTF/iF, BIOS 3.0 07/26/2013
Call Trace:
<IRQ>
dump_stack_lvl+0x32/0x50
print_report+0xca/0x620
kasan_report_invalid_free+0x64/0x90
__kasan_slab_free+0x1aa/0x1f0
kfree+0xed/0x2e0
inet_sock_destruct+0x54f/0x8b0
__sk_destruct+0x48/0x5b0
rcu_do_batch+0x34e/0xd90
rcu_core+0x559/0xac0
__do_softirq+0x183/0x5a4
irq_exit_rcu+0x12d/0x170
sysvec_apic_timer_interrupt+0x6b/0x80
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x16/0x20
RIP: 0010:cpuidle_enter_state+0x175/0x300
Code: 30 00 0f 84 1f 01 00 00 83 e8 01 83 f8 ff 75 e5 48 83 c4 18 44 89 e8 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc fb 45 85 ed <0f> 89 60 ff ff ff 48 c1 e5 06 48 c7 43 18 00 00 00 00 48 83 44 2b
RSP: 0018:ffff888481cf7d90 EFLAGS: 00000202
RAX: 0000000000000000 RBX: ffff88887facddc8 RCX: 0000000000000000
RDX: 1ffff1110ff588b1 RSI: 0000000000000019 RDI: ffff88887fac4588
RBP: 0000000000000004 R08: 0000000000000002 R09: 0000000000043080
R10: 0009b02ea273363f R11: ffff88887fabf42b R12: ffffffff932592e0
R13: 0000000000000004 R14: 0000000000000000 R15: 00000022c880ec80
cpuidle_enter+0x4a/0xa0
do_idle+0x310/0x410
cpu_startup_entry+0x51/0x60
start_secondary+0x211/0x270
secondary_startup_64_no_verify+0x184/0x18b
</TASK>
Allocated by task 6853:
kasan_save_stack+0x1c/0x40
kasan_save_track+0x10/0x30
__kasan_kmalloc+0xa6/0xb0
__kmalloc+0x1eb/0x450
cipso_v4_sock_setattr+0x96/0x360
netlbl_sock_setattr+0x132/0x1f0
selinux_netlbl_socket_post_create+0x6c/0x110
selinux_socket_post_create+0x37b/0x7f0
security_socket_post_create+0x63/0xb0
__sock_create+0x305/0x450
__sys_socket_create.part.23+0xbd/0x130
__sys_socket+0x37/0xb0
__x64_sys_socket+0x6f/0xb0
do_syscall_64+0x83/0x160
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Freed by task 6858:
kasan_save_stack+0x1c/0x40
kasan_save_track+0x10/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x12c/0x1f0
kfree+0xed/0x2e0
inet_sock_destruct+0x54f/0x8b0
__sk_destruct+0x48/0x5b0
subflow_ulp_release+0x1f0/0x250
tcp_cleanup_ulp+0x6e/0x110
tcp_v4_destroy_sock+0x5a/0x3a0
inet_csk_destroy_sock+0x135/0x390
tcp_fin+0x416/0x5c0
tcp_data_queue+0x1bc8/0x4310
tcp_rcv_state_process+0x15a3/0x47b0
tcp_v4_do_rcv+0x2c1/0x990
tcp_v4_rcv+0x41fb/0x5ed0
ip_protocol_deliver_rcu+0x6d/0x9f0
ip_local_deliver_finish+0x278/0x360
ip_local_deliver+0x182/0x2c0
ip_rcv+0xb5/0x1c0
__netif_receive_skb_one_core+0x16e/0x1b0
process_backlog+0x1e3/0x650
__napi_poll+0xa6/0x500
net_rx_action+0x740/0xbb0
__do_softirq+0x183/0x5a4
The buggy address belongs to the object at ffff888485950880
which belongs to the cache kmalloc-64 of size 64
The buggy address is located 0 bytes inside of
64-byte region [ffff888485950880, ffff8884859508c0)
The buggy address belongs to the physical page:
page:0000000056d1e95e refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888485950700 pfn:0x485950
flags: 0x57ffffc0000800(slab|node=1|zone=2|lastcpupid=0x1fffff)
page_type: 0xffffffff()
raw: 0057ffffc0000800 ffff88810004c640 ffffea00121b8ac0 dead000000000006
raw: ffff888485950700 0000000000200019 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888485950780: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff888485950800: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
>ffff888485950880: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
^
ffff888485950900: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ffff888485950980: 00 00 00 00 00 01 fc fc fc fc fc fc fc fc fc fc
Something similar (a refcount underflow) happens with CALIPSO/IPv6. Fix
this by duplicating IP / IPv6 options after clone, so that
ip{,6}_sock_destruct() doesn't end up freeing the same memory area twice.
Fixes: cf7da0d66c ("mptcp: Create SUBFLOW socket for incoming connections")
Cc: stable@vger.kernel.org
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-8-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
when inserting not contiguous data in the subflow write queue,
the protocol creates a new skb and prevent the TCP stack from
merging it later with already queued skbs by setting the EOR marker.
Still no push flag is explicitly set at the end of previous GSO
packet, making the aggregation on the receiver side sub-optimal -
and packetdrill self-tests less predictable.
Explicitly mark the end of not contiguous DSS with the push flag.
Fixes: 6d0060f600 ("mptcp: Write MPTCP DSS headers to outgoing data packets")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-4-162e87e48497@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This fixes a possible UAF in if_nlmsg_size(),
which can run without RTNL.
Add rcu protection to "struct dpll_pin"
Move netdev_dpll_pin() from netdevice.h to dpll.h to
decrease name pollution.
Note: This looks possible to no longer acquire RTNL in
netdev_dpll_pin_assign() later in net-next.
v2: do not force rcu_read_lock() in rtnl_dpll_pin_size() (Jiri Pirko)
Fixes: 5f18426928 ("netdev: expose DPLL pin handle for netdevice")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Cc: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240223123208.3543319-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Same as LAN7800, LAN7850 can be used without EEPROM. If EEPROM is not
present or not flashed, LAN7850 will fail to sync the speed detected by the PHY
with the MAC. In case link speed is 100Mbit, it will accidentally work,
otherwise no data can be transferred.
Better way would be to implement link_up callback, or set auto speed
configuration unconditionally. But this changes would be more intrusive.
So, for now, set it only if no EEPROM is found.
Fixes: e69647a19c ("lan78xx: Set ASD in MAC_CR when EEE is enabled.")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20240222123839.2816561-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the driver detects that the controller is not ready before sending the
first IOC facts command, it will wait for a maximum of 10 seconds for it to
become ready. However, even if the controller becomes ready within 10
seconds, the driver will still issue a diagnostic reset.
Modify the driver to avoid sending a diag reset if the controller becomes
ready within the 10-second wait time.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://lore.kernel.org/r/20240221071724.14986-1-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Doubling the number of PHYs also doubled the stack usage of this function,
exceeding the 32-bit limit of 1024 bytes:
drivers/scsi/mpi3mr/mpi3mr_transport.c: In function 'mpi3mr_refresh_sas_ports':
drivers/scsi/mpi3mr/mpi3mr_transport.c:1818:1: error: the frame size of 1636 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Since the sas_io_unit_pg0 structure is already allocated dynamically, use
the same method here. The size of the allocation can be smaller based on
the actual number of phys now, so use this as an upper bound.
Fixes: cb5b608946 ("scsi: mpi3mr: Increase maximum number of PHYs to 64 from 32")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Cc: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240123130754.2011469-1-arnd@kernel.org
Tested-by: John Garry <john.g.garry@oracle.com> #build only
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since MOCK_HUGE_PAGE_SIZE was introduced it allows the core code to invoke
mock with large page sizes. This confuses the validation logic that checks
that map/unmap are paired.
This is because the page size computed for map is based on the physical
address and in many cases will always be the base page size, however the
entire range generated by iommufd will be passed to map.
Randomly iommufd can see small groups of physically contiguous pages,
(say 8k unaligned and grouped together), but that group crosses a huge
page boundary. The map side will observe this as a contiguous run and mark
it accordingly, but there is a chance the unmap side will end up
terminating interior huge pages in the middle of that group and trigger a
validation failure. Meaning the validation only works if the core code
passes the iova/length directly from iommufd to mock.
syzkaller randomly hits this with failures like:
WARNING: CPU: 0 PID: 11568 at drivers/iommu/iommufd/selftest.c:461 mock_domain_unmap_pages+0x1c0/0x250
Modules linked in:
CPU: 0 PID: 11568 Comm: syz-executor.0 Not tainted 6.8.0-rc3+ #4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:mock_domain_unmap_pages+0x1c0/0x250
Code: 2b e8 94 37 0f ff 48 d1 eb 31 ff 48 b8 00 00 00 00 00 00 20 00 48 21 c3 48 89 de e8 aa 32 0f ff 48 85 db 75 07 e8 70 37 0f ff <0f> 0b e8 69 37 0f ff 31 f6 31 ff e8 90 32 0f ff e8 5b 37 0f ff 4c
RSP: 0018:ffff88800e707490 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff822dfae6
RDX: ffff88800cf86400 RSI: ffffffff822dfaf0 RDI: 0000000000000007
RBP: ffff88800e7074d8 R08: 0000000000000000 R09: ffffed1001167c90
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000001500000
R13: 0000000000083000 R14: 0000000000000001 R15: 0000000000000800
FS: 0000555556048480(0000) GS:ffff88806d400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2dc23000 CR3: 0000000008cbb000 CR4: 0000000000350eb0
Call Trace:
<TASK>
__iommu_unmap+0x281/0x520
iommu_unmap+0xc9/0x180
iopt_area_unmap_domain_range+0x1b1/0x290
iopt_area_unpin_domain+0x590/0x800
__iopt_area_unfill_domain+0x22e/0x650
iopt_area_unfill_domain+0x47/0x60
iopt_unfill_domain+0x187/0x590
iopt_table_remove_domain+0x267/0x2d0
iommufd_hwpt_paging_destroy+0x1f1/0x370
iommufd_object_remove+0x2a3/0x490
iommufd_device_detach+0x23a/0x2c0
iommufd_selftest_destroy+0x7a/0xf0
iommufd_fops_release+0x1d3/0x340
__fput+0x272/0xb50
__fput_sync+0x4b/0x60
__x64_sys_close+0x8b/0x110
do_syscall_64+0x71/0x140
entry_SYSCALL_64_after_hwframe+0x46/0x4e
Do the simple thing and just disable the validation when the huge page
tests are being run.
Fixes: 7db521e23f ("iommufd/selftest: Hugepage mock domain support")
Link: https://lore.kernel.org/r/0-v1-1e17e60a5c8a+103fb-iommufd_mock_hugepg_jgg@nvidia.com
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Syzkaller reported the following bug:
general protection fault, probably for non-canonical address 0xdffffc0000000038: 0000 [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000001c0-0x00000000000001c7]
Call Trace:
lock_acquire
lock_acquire+0x1ce/0x4f0
down_read+0x93/0x4a0
iommufd_test_syz_conv_iova+0x56/0x1f0
iommufd_test_access_rw.isra.0+0x2ec/0x390
iommufd_test+0x1058/0x1e30
iommufd_fops_ioctl+0x381/0x510
vfs_ioctl
__do_sys_ioctl
__se_sys_ioctl
__x64_sys_ioctl+0x170/0x1e0
do_syscall_x64
do_syscall_64+0x71/0x140
This is because the new iommufd_access_change_ioas() sets access->ioas to
NULL during its process, so the lock might be gone in a concurrent racing
context.
Fix this by doing the same access->ioas sanity as iommufd_access_rw() and
iommufd_access_pin_pages() functions do.
Cc: stable@vger.kernel.org
Fixes: 9227da7816 ("iommufd: Add iommufd_access_change_ioas(_id) helpers")
Link: https://lore.kernel.org/r/3f1932acaf1dd494d404c04364d73ce8f57f3e5e.1708636627.git.nicolinc@nvidia.com
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Syzkaller reported the following bug:
sysfs: cannot create duplicate filename '/devices/iommufd_mock4'
Call Trace:
sysfs_warn_dup+0x71/0x90
sysfs_create_dir_ns+0x1ee/0x260
? sysfs_create_mount_point+0x80/0x80
? spin_bug+0x1d0/0x1d0
? do_raw_spin_unlock+0x54/0x220
kobject_add_internal+0x221/0x970
kobject_add+0x11c/0x1e0
? lockdep_hardirqs_on_prepare+0x273/0x3e0
? kset_create_and_add+0x160/0x160
? kobject_put+0x5d/0x390
? bus_get_dev_root+0x4a/0x60
? kobject_put+0x5d/0x390
device_add+0x1d5/0x1550
? __fw_devlink_link_to_consumers.isra.0+0x1f0/0x1f0
? __init_waitqueue_head+0xcb/0x150
iommufd_test+0x462/0x3b60
? lock_release+0x1fe/0x640
? __might_fault+0x117/0x170
? reacquire_held_locks+0x4b0/0x4b0
? iommufd_selftest_destroy+0xd0/0xd0
? __might_fault+0xbe/0x170
iommufd_fops_ioctl+0x256/0x350
? iommufd_option+0x180/0x180
? __lock_acquire+0x1755/0x45f0
__x64_sys_ioctl+0xa13/0x1640
The bug is triggered when Syzkaller created multiple mock devices but
didn't destroy them in the same sequence, messing up the mock_dev_num
counter. Replace the atomic with an mock_dev_ida.
Cc: stable@vger.kernel.org
Fixes: 23a1b46f15 ("iommufd/selftest: Make the mock iommu driver into a real driver")
Link: https://lore.kernel.org/r/5af41d5af6d5c013cc51de01427abb8141b3587e.1708636627.git.nicolinc@nvidia.com
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Syzkaller reported the following WARN_ON:
WARNING: CPU: 1 PID: 4738 at drivers/iommu/iommufd/io_pagetable.c:1360
Call Trace:
iommufd_access_change_ioas+0x2fe/0x4e0
iommufd_access_destroy_object+0x50/0xb0
iommufd_object_remove+0x2a3/0x490
iommufd_object_destroy_user
iommufd_access_destroy+0x71/0xb0
iommufd_test_staccess_release+0x89/0xd0
__fput+0x272/0xb50
__fput_sync+0x4b/0x60
__do_sys_close
__se_sys_close
__x64_sys_close+0x8b/0x110
do_syscall_x64
The mismatch between the access pointer in the list and the passed-in
pointer is resulting from an overwrite of access->iopt_access_list_id, in
iopt_add_access(). Called from iommufd_access_change_ioas() when
xa_alloc() succeeds but iopt_calculate_iova_alignment() fails.
Add a new_id in iopt_add_access() and only update iopt_access_list_id when
returning successfully.
Cc: stable@vger.kernel.org
Fixes: 9227da7816 ("iommufd: Add iommufd_access_change_ioas(_id) helpers")
Link: https://lore.kernel.org/r/2dda7acb25b8562ec5f1310de828ef5da9ef509c.1708636627.git.nicolinc@nvidia.com
Reported-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Pull mtd fixes from Miquel Raynal:
"Many NAND page layouts have been added to the Marvell NAND controller
but could not be used in practice so they are being removed.
Regarding the SPI-NAND area, Gigadevice chips were not using the right
buffer for an ECC status check operation.
Aside from these driver fixes, there is also a refcount fix in the MTD
core nodes parsing logic"
* tag 'mtd/fixes-for-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: marvell: fix layouts
mtd: Fix possible refcounting issue when going through partition nodes
mtd: spinand: gigadevice: Fix the get ecc status issue
Pull btrfs fixes from David Sterba:
"A more fixes for recently reported or discovered problems:
- fix corner case of send that would generate potentially large
stream of zeros if there's a hole at the end of the file
- fix chunk validation in zoned mode on conventional zones, it was
possible to create chunks that would not be allowed on sequential
zones
- fix validation of dev-replace ioctl filenames
- fix KCSAN warnings about access to block reserve struct members"
* tag 'for-6.8-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix data race at btrfs_use_block_rsv() when accessing block reserve
btrfs: fix data races when accessing the reserved amount of block reserves
btrfs: send: don't issue unnecessary zero writes for trailing hole
btrfs: dev-replace: properly validate device names
btrfs: zoned: don't skip block group profile checks on conventional zones
The addition of bal_rank_mask with encoding version 17 was merged
into ceph.git in Oct 2022 and made it into v18.2.0 release normally.
A few months later, the much delayed addition of max_xattr_size got
merged, also with encoding version 17, placed before bal_rank_mask
in the encoding -- but it didn't make v18.2.0 release.
The way this ended up being resolved on the MDS side is that
bal_rank_mask will continue to be encoded in version 17 while
max_xattr_size is now encoded in version 18. This does mean that
older kernels will misdecode version 17, but this is also true for
v18.2.0 and v18.2.1 clients in userspace.
The best we can do is backport this adjustment -- see ceph.git
commit 78abfeaff27fee343fb664db633de5b221699a73 for details.
[ idryomov: changelog ]
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/64440
Fixes: d93231a6bc ("ceph: prevent a client from exceeding the MDS maximum xattr size")
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Patrick Donnelly <pdonnell@ibm.com>
Reviewed-by: Venky Shankar <vshankar@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When CONFIG_NTFS3_LZX_XPRESS is not set then we get the following build
error:
fs/ntfs3/frecord.c:2460:16: error: unused variable ‘i_size’
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Fixes: 4fd6c08a16 ("fs/ntfs3: Use i_size_read and i_size_write")
Tested-by: Chris Clayton <chris2553@googlemail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When linking or renaming a file, if only one of the source or
destination directory is backed by an S_PRIVATE inode, then the related
set of layer masks would be used as uninitialized by
is_access_to_paths_allowed(). This would result to indeterministic
access for one side instead of always being allowed.
This bug could only be triggered with a mounted filesystem containing
both S_PRIVATE and !S_PRIVATE inodes, which doesn't seem possible.
The collect_domain_accesses() calls return early if
is_nouser_or_private() returns false, which means that the directory's
superblock has SB_NOUSER or its inode has S_PRIVATE. Because rename or
link actions are only allowed on the same mounted filesystem, the
superblock is always the same for both source and destination
directories. However, it might be possible in theory to have an
S_PRIVATE parent source inode with an !S_PRIVATE parent destination
inode, or vice versa.
To make sure this case is not an issue, explicitly initialized both set
of layer masks to 0, which means to allow all actions on the related
side. If at least on side has !S_PRIVATE, then
collect_domain_accesses() and is_access_to_paths_allowed() check for the
required access rights.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Shervin Oloumi <enlightened@chromium.org>
Cc: stable@vger.kernel.org
Fixes: b91c3e4ea7 ("landlock: Add support for file reparenting with LANDLOCK_ACCESS_FS_REFER")
Link: https://lore.kernel.org/r/20240219190345.2928627-1-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
MKTME repurposes the high bit of physical address to key id for encryption
key and, even though MAXPHYADDR in CPUID[0x80000008] remains the same,
the valid bits in the MTRR mask register are based on the reduced number
of physical address bits.
detect_tme() in arch/x86/kernel/cpu/intel.c detects TME and subtracts
it from the total usable physical bits, but it is called too late.
Move the call to early_init_intel() so that it is called in setup_arch(),
before MTRRs are setup.
This fixes boot on TDX-enabled systems, which until now only worked with
"disable_mtrr_cleanup". Without the patch, the values written to the
MTRRs mask registers were 52-bit wide (e.g. 0x000fffff_80000800) and
the writes failed; with the patch, the values are 46-bit wide, which
matches the reduced MAXPHYADDR that is shown in /proc/cpuinfo.
Reported-by: Zixi Chen <zixchen@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240131230902.1867092-3-pbonzini%40redhat.com
In commit fbf6449f84 ("x86/sev-es: Set x86_virt_bits to the correct
value straight away, instead of a two-phase approach"), the initialization
of c->x86_phys_bits was moved after this_cpu->c_early_init(c). This is
incorrect because early_init_amd() expected to be able to reduce the
value according to the contents of CPUID leaf 0x8000001f.
Fortunately, the bug was negated by init_amd()'s call to early_init_amd(),
which does reduce x86_phys_bits in the end. However, this is very
late in the boot process and, most notably, the wrong value is used for
x86_phys_bits when setting up MTRRs.
To fix this, call get_cpu_address_sizes() as soon as X86_FEATURE_CPUID is
set/cleared, and c->extended_cpuid_level is retrieved.
Fixes: fbf6449f84 ("x86/sev-es: Set x86_virt_bits to the correct value straight away, instead of a two-phase approach")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240131230902.1867092-2-pbonzini%40redhat.com
Commit a5a923038d (fbdev: fbcon: Properly revert changes when
vc_resize() failed) started restoring old font data upon failure (of
vc_resize()). But it performs so only for user fonts. It means that the
"system"/internal fonts are not restored at all. So in result, the very
first call to fbcon_do_set_font() performs no restore at all upon
failing vc_resize().
This can be reproduced by Syzkaller to crash the system on the next
invocation of font_get(). It's rather hard to hit the allocation failure
in vc_resize() on the first font_set(), but not impossible. Esp. if
fault injection is used to aid the execution/failure. It was
demonstrated by Sirius:
BUG: unable to handle page fault for address: fffffffffffffff8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD cb7b067 P4D cb7b067 PUD cb7d067 PMD 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 8007 Comm: poc Not tainted 6.7.0-g9d1694dc91ce #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:fbcon_get_font+0x229/0x800 drivers/video/fbdev/core/fbcon.c:2286
Call Trace:
<TASK>
con_font_get drivers/tty/vt/vt.c:4558 [inline]
con_font_op+0x1fc/0xf20 drivers/tty/vt/vt.c:4673
vt_k_ioctl drivers/tty/vt/vt_ioctl.c:474 [inline]
vt_ioctl+0x632/0x2ec0 drivers/tty/vt/vt_ioctl.c:752
tty_ioctl+0x6f8/0x1570 drivers/tty/tty_io.c:2803
vfs_ioctl fs/ioctl.c:51 [inline]
...
So restore the font data in any case, not only for user fonts. Note the
later 'if' is now protected by 'old_userfont' and not 'old_data' as the
latter is always set now. (And it is supposed to be non-NULL. Otherwise
we would see the bug above again.)
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Fixes: a5a923038d ("fbdev: fbcon: Properly revert changes when vc_resize() failed")
Reported-and-tested-by: Ubisectech Sirius <bugreport@ubisectech.com>
Cc: Ubisectech Sirius <bugreport@ubisectech.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208114411.14604-1-jirislaby@kernel.org
It seems that if userspace provides a correct IFA_TARGET_NETNSID value
but no IFA_ADDRESS and IFA_LOCAL attributes, inet6_rtm_getaddr()
returns -EINVAL with an elevated "struct net" refcount.
Fixes: 6ecf4c37eb ("ipv6: enable IFA_TARGET_NETNSID for RTM_GETADDR")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test that we keep GRO flag in sync when XDP is disabled while
the device is closed.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
veth sets NETIF_F_GRO automatically when XDP is enabled,
because both features use the same NAPI machinery.
The logic to clear NETIF_F_GRO sits in veth_disable_xdp() which
is called both on ndo_stop and when XDP is turned off.
To avoid the flag from being cleared when the device is brought
down, the clearing is skipped when IFF_UP is not set.
Bringing the device down should indeed not modify its features.
Unfortunately, this means that clearing is also skipped when
XDP is disabled _while_ the device is down. And there's nothing
on the open path to bring the device features back into sync.
IOW if user enables XDP, disables it and then brings the device
up we'll end up with a stray GRO flag set but no NAPI instances.
We don't depend on the GRO flag on the datapath, so the datapath
won't crash. We will crash (or hang), however, next time features
are sync'ed (either by user via ethtool or peer changing its config).
The GRO flag will go away, and veth will try to disable the NAPIs.
But the open path never created them since XDP was off, the GRO flag
was a stray. If NAPI was initialized before we'll hang in napi_disable().
If it never was we'll crash trying to stop uninitialized hrtimer.
Move the GRO flag updates to the XDP enable / disable paths,
instead of mixing them with the ndo_open / ndo_close paths.
Fixes: d3256efd8e ("veth: allow enabling NAPI even without XDP")
Reported-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: syzbot+039399a9b96297ddedca@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After a couple recent changes in LLVM, there is a warning (or error with
CONFIG_WERROR=y or W=e) from the compile time fortify source routines,
specifically the memset() in copy_to_user_tmpl().
In file included from net/xfrm/xfrm_user.c:14:
...
include/linux/fortify-string.h:438:4: error: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
438 | __write_overflow_field(p_size_field, size);
| ^
1 error generated.
While ->xfrm_nr has been validated against XFRM_MAX_DEPTH when its value
is first assigned in copy_templates() by calling validate_tmpl() first
(so there should not be any issue in practice), LLVM/clang cannot really
deduce that across the boundaries of these functions. Without that
knowledge, it cannot assume that the loop stops before i is greater than
XFRM_MAX_DEPTH, which would indeed result a stack buffer overflow in the
memset().
To make the bounds of ->xfrm_nr clear to the compiler and add additional
defense in case copy_to_user_tmpl() is ever used in a path where
->xfrm_nr has not been properly validated against XFRM_MAX_DEPTH first,
add an explicit bound check and early return, which clears up the
warning.
Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/1985
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Pull bcachefs fixes from Kent Overstreet:
"Some more mostly boring fixes, but some not
User reported ones:
- the BTREE_ITER_FILTER_SNAPSHOTS one fixes a really nasty
performance bug; user reported an untar initially taking two
seconds and then ~2 minutes
- kill a __GFP_NOFAIL in the buffered read path; this was a leftover
from the trickier fix to kill __GFP_NOFAIL in readahead, where we
can't return errors (and have to silently truncate the read
ourselves).
bcachefs can't use GFP_NOFAIL for folio state unlike iomap based
filesystems because our folio state is just barely too big, 2MB
hugepages cause us to exceed the 2 page threshhold for GFP_NOFAIL.
additionally, the flags argument was just buggy, we weren't
supplying GFP_KERNEL previously (!)"
* tag 'bcachefs-2024-02-25' of https://evilpiepirate.org/git/bcachefs:
bcachefs: fix bch2_save_backtrace()
bcachefs: Fix check_snapshot() memcpy
bcachefs: Fix bch2_journal_flush_device_pins()
bcachefs: fix iov_iter count underflow on sub-block dio read
bcachefs: Fix BTREE_ITER_FILTER_SNAPSHOTS on inodes btree
bcachefs: Kill __GFP_NOFAIL in buffered read path
bcachefs: fix backpointer_to_text() when dev does not exist
Pull two documentation build fixes from Jonathan Corbet:
- The XFS online fsck documentation uses incredibly deeply nested
subsection and list nesting; that broke the PDF docs build. Tweak a
parameter to tell LaTeX to allow the deeper nesting.
- Fix a 6.8 PDF-build regression
* tag 'docs-6.8-fixes3' of git://git.lwn.net/linux:
docs: translations: use attribute to store current language
docs: Instruct LaTeX to cope with deeper nesting
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 6.8-rc6 to resolve some reported
problems. These include:
- regression fixes with typec tpcm code as reported by many
- cdnsp and cdns3 driver fixes
- usb role setting code bugfixes
- build fix for uhci driver
- ncm gadget driver bugfix
- MAINTAINERS entry update
All of these have been in linux-next all week with no reported issues
and there is at least one fix in here that is in Thorsten's regression
list that is being tracked"
* tag 'usb-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tpcm: Fix issues with power being removed during reset
MAINTAINERS: Drop myself as maintainer of TYPEC port controller drivers
usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBs
Revert "usb: typec: tcpm: reset counter when enter into unattached state after try role"
usb: gadget: omap_udc: fix USB gadget regression on Palm TE
usb: dwc3: gadget: Don't disconnect if not started
usb: cdns3: fix memory double free when handle zero packet
usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable()
usb: roles: don't get/set_role() when usb_role_switch is unregistered
usb: roles: fix NULL pointer issue when put module's reference
usb: cdnsp: fixed issue with incorrect detecting CDNSP family controllers
usb: cdnsp: blocked some cdns3 specific code
usb: uhci-grlib: Explicitly include linux/platform_device.h
Pull tty/serial driver fixes from Greg KH:
"Here are three small serial/tty driver fixes for 6.8-rc6 that resolve
the following reported errors:
- riscv hvc console driver fix that was reported by many
- amba-pl011 serial driver fix for RS485 mode
- stm32 serial driver fix for RS485 mode
All of these have been in linux-next all week with no reported
problems"
* tag 'tty-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: amba-pl011: Fix DMA transmission in RS485 mode
serial: stm32: do not always set SER_RS485_RX_DURING_TX if RS485 is enabled
tty: hvc: Don't enable the RISC-V SBI console by default
Pull x86 fixes from Borislav Petkov:
- Make sure clearing CPU buffers using VERW happens at the latest
possible point in the return-to-userspace path, otherwise memory
accesses after the VERW execution could cause data to land in CPU
buffers again
* tag 'x86_urgent_for_v6.8_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
KVM/VMX: Move VERW closer to VMentry for MDS mitigation
KVM/VMX: Use BT+JNC, i.e. EFLAGS.CF to select VMRESUME vs. VMLAUNCH
x86/bugs: Use ALTERNATIVE() instead of mds_user_clear static key
x86/entry_32: Add VERW just before userspace transition
x86/entry_64: Add VERW just before userspace transition
x86/bugs: Add asm helpers for executing VERW
Pull irq fixes from Borislav Petkov:
- Make sure GICv4 always gets initialized to prevent a kexec-ed kernel
from silently failing to set it up
- Do not call bus_get_dev_root() for the mbigen irqchip as it always
returns NULL - use NULL directly
- Fix hardware interrupt number truncation when assigning MSI
interrupts
- Correct sending end-of-interrupt messages to disabled interrupts
lines on RISC-V PLIC
* tag 'irq_urgent_for_v6.8_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Do not assume vPE tables are preallocated
irqchip/mbigen: Don't use bus_get_dev_root() to find the parent
PCI/MSI: Prevent MSI hardware interrupt number truncation
irqchip/sifive-plic: Enable interrupt if needed before EOI
Pull erofs fix from Gao Xiang:
- Fix page refcount leak when looking up specific inodes
introduced by metabuf reworking
* tag 'erofs-for-6.8-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix refcount on the metabuf used for inode lookup
Pull RCU pathwalk fixes from Al Viro:
"We still have some races in filesystem methods when exposed to RCU
pathwalk. This series is a result of code audit (the second round of
it) and it should deal with most of that stuff.
Still pending: ntfs3 ->d_hash()/->d_compare() and ceph_d_revalidate().
Up to maintainers (a note for NTFS folks - when documentation says
that a method may not block, it *does* imply that blocking allocations
are to be avoided. Really)"
[ More explanations for people who aren't familiar with the vagaries of
RCU path walking: most of it is hidden from filesystems, but if a
filesystem actively participates in the low-level path walking it
needs to make sure the fields involved in that walk are RCU-safe.
That "actively participate in low-level path walking" includes things
like having its own ->d_hash()/->d_compare() routines, or by having
its own directory permission function that doesn't just use the common
helpers. Having a ->d_revalidate() function will also have this issue.
Note that instead of making everything RCU safe you can also choose to
abort the RCU pathwalk if your operation cannot be done safely under
RCU, but that obviously comes with a performance penalty. One common
pattern is to allow the simple cases under RCU, and abort only if you
need to do something more complicated.
So not everything needs to be RCU-safe, and things like the inode etc
that the VFS itself maintains obviously already are. But these fixes
tend to be about properly RCU-delaying things like ->s_fs_info that
are maintained by the filesystem and that got potentially released too
early. - Linus ]
* tag 'pull-fixes.pathwalk-rcu-2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ext4_get_link(): fix breakage in RCU mode
cifs_get_link(): bail out in unsafe case
fuse: fix UAF in rcu pathwalks
procfs: make freeing proc_fs_info rcu-delayed
procfs: move dropping pde and pid from ->evict_inode() to ->free_inode()
nfs: fix UAF on pathwalk running into umount
nfs: make nfs_set_verifier() safe for use in RCU pathwalk
afs: fix __afs_break_callback() / afs_drop_open_mmap() race
hfsplus: switch to rcu-delayed unloading of nls and freeing ->s_fs_info
exfat: move freeing sbi, upcase table and dropping nls into rcu-delayed helper
affs: free affs_sb_info with kfree_rcu()
rcu pathwalk: prevent bogus hard errors from may_lookup()
fs/super.c: don't drop ->s_user_ns until we free struct super_block itself
Pull vfs fixes from Al Viro:
"A couple of fixes - revert of regression from this cycle and a fix for
erofs failure exit breakage (had been there since way back)"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
erofs: fix handling kern_mount() failure
Revert "get rid of DCACHE_GENOCIDE"
The "media_ldb_root_clk" is the gate clock to enable or disable the clock
provided by CCM(Clock Control Module) to LDB instead of the "media_ldb"
clock which is the parent of the "media_ldb_root_clk" clock as a composite
clock. Fix LDB clocks property by referencing the "media_ldb_root_clk"
clock instead of the "media_ldb" clock.
Fixes: e7567840ec ("arm64: dts: imx8mp: Reorder clock and reg properties")
Fixes: 94e6197dad ("arm64: dts: imx8mp: Add LCDIF2 & LDB nodes")
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The TC9595 reset GPIO is SAI1_RXC / GPIO4_IO01, fix the DT accordingly.
The SAI5_RXD0 / GPIO3_IO21 is thus far unused TC9595 interrupt line.
Fixes: 20d0b83e71 ("arm64: dts: imx8mp: Add TC9595 bridge on DH electronics i.MX8M Plus DHCOM")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
So far we used an internal linux-imx@nxp.com email address to
gather all patches related to NXP i.MX development.
Let's switch to an open mailing list that provides ability
for people from the community to subscribe and also have
a proper archive.
List interface at: https://lists.linux.dev.
Archive is at: https://lore.kernel.org/imx/
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This fixes the display not working on colibri imx7, the driver fails to
load with the following error:
mxsfb 30730000.lcdif: error -ENODEV: Cannot connect bridge
NXP i.MX7 LCDIF is connected to both the Parallel LCD Display and to a
MIPI DSI IP block, currently it's not possible to describe the
connection to both.
Remove the port endpoint from the SOC dtsi to prevent regressions, this
would need to be defined on the board DTS.
Reported-by: Hiago De Franco <hiagofranco@gmail.com>
Closes: https://lore.kernel.org/r/34yzygh3mbwpqr2re7nxmhyxy3s7qmqy4vhxvoyxnoguktriur@z66m7gvpqlia/
Fixes: edbbae7fba ("ARM: dts: imx7: add MIPI-DSI support")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The 'duplicates' bool argument is always true when efivar_init() is
called from its only caller so let's just drop it instead.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Al points out that kill_sb() will be called if efivarfs_fill_super()
fails and so there is no point in cleaning up the efivar entry list.
Reported-by: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Work around a quirk in a few old (2011-ish) UEFI implementations, where
a call to `GetNextVariableName` with a buffer size larger than 512 bytes
will always return EFI_INVALID_PARAMETER.
There is some lore around EFI variable names being up to 1024 bytes in
size, but this has no basis in the UEFI specification, and the upper
bounds are typically platform specific, and apply to the entire variable
(name plus payload).
Given that Linux does not permit creating files with names longer than
NAME_MAX (255) bytes, 512 bytes (== 256 UTF-16 characters) is a
reasonable limit.
Cc: <stable@vger.kernel.org> # 6.1+
Signed-off-by: Tim Schumacher <timschumi@gmx.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
1) errors from ext4_getblk() should not be propagated to caller
unless we are really sure that we would've gotten the same error
in non-RCU pathwalk.
2) we leak buffer_heads if ext4_getblk() is successful, but bh is
not uptodate.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
->d_revalidate() bails out there, anyway. It's not enough
to prevent getting into ->get_link() in RCU mode, but that
could happen only in a very contrieved setup. Not worth
trying to do anything fancy here unless ->d_revalidate()
stops kicking out of RCU mode at least in some cases.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
->permission(), ->get_link() and ->inode_get_acl() might dereference
->s_fs_info (and, in case of ->permission(), ->s_fs_info->fc->user_ns
as well) when called from rcu pathwalk.
Freeing ->s_fs_info->fc is rcu-delayed; we need to make freeing ->s_fs_info
and dropping ->user_ns rcu-delayed too.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
makes proc_pid_ns() safe from rcu pathwalk (put_pid_ns()
is still synchronous, but that's not a problem - it does
rcu-delay everything that needs to be)
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
that keeps both around until struct inode is freed, making access
to them safe from rcu-pathwalk
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
NFS ->d_revalidate(), ->permission() and ->get_link() need to access
some parts of nfs_server when called in RCU mode:
server->flags
server->caps
*(server->io_stats)
and, worst of all, call
server->nfs_client->rpc_ops->have_delegation
(the last one - as NFS_PROTO(inode)->have_delegation()). We really
don't want to RCU-delay the entire nfs_free_server() (it would have
to be done with schedule_work() from RCU callback, since it can't
be made to run from interrupt context), but actual freeing of
nfs_server and ->io_stats can be done via call_rcu() just fine.
nfs_client part is handled simply by making nfs_free_client() use
kfree_rcu().
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
nfs_set_verifier() relies upon dentry being pinned; if that's
the case, grabbing ->d_lock stabilizes ->d_parent and guarantees
that ->d_parent points to a positive dentry. For something
we'd run into in RCU mode that is *not* true - dentry might've
been through dentry_kill() just as we grabbed ->d_lock, with
its parent going through the same just as we get to into
nfs_set_verifier_locked(). It might get to detaching inode
(and zeroing ->d_inode) before nfs_set_verifier_locked() gets
to fetching that; we get an oops as the result.
That can happen in nfs{,4} ->d_revalidate(); the call chain in
question is nfs_set_verifier_locked() <- nfs_set_verifier() <-
nfs_lookup_revalidate_delegated() <- nfs{,4}_do_lookup_revalidate().
We have checked that the parent had been positive, but that's
done before we get to nfs_set_verifier() and it's possible for
memory pressure to pick our dentry as eviction candidate by that
time. If that happens, back-to-back attempts to kill dentry and
its parent are quite normal. Sure, in case of eviction we'll
fail the ->d_seq check in the caller, but we need to survive
until we return there...
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
In __afs_break_callback() we might check ->cb_nr_mmap and if it's non-zero
do queue_work(&vnode->cb_work). In afs_drop_open_mmap() we decrement
->cb_nr_mmap and do flush_work(&vnode->cb_work) if it reaches zero.
The trouble is, there's nothing to prevent __afs_break_callback() from
seeing ->cb_nr_mmap before the decrement and do queue_work() after both
the decrement and flush_work(). If that happens, we might be in trouble -
vnode might get freed before the queued work runs.
__afs_break_callback() is always done under ->cb_lock, so let's make
sure that ->cb_nr_mmap can change from non-zero to zero while holding
->cb_lock (the spinlock component of it - it's a seqlock and we don't
need to mess with the counter).
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
->d_hash() and ->d_compare() use those, so we need to delay freeing
them.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
That stuff can be accessed by ->d_hash()/->d_compare(); as it is, we have
a hard-to-hit UAF if rcu pathwalk manages to get into ->d_hash() on a filesystem
that is in process of getting shut down.
Besides, having nls and upcase table cleanup moved from ->put_super() towards
the place where sbi is freed makes for simpler failure exits.
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
If lazy call of ->permission() returns a hard error, check that
try_to_unlazy() succeeds before returning it. That both makes
life easier for ->permission() instances and closes the race
in ENOTDIR handling - it is possible that positive d_can_lookup()
seen in link_path_walk() applies to the state *after* unlink() +
mkdir(), while nd->inode matches the state prior to that.
Normally seeing e.g. EACCES from permission check in rcu pathwalk
means that with some timings non-rcu pathwalk would've run into
the same; however, running into a non-executable regular file
in the middle of a pathname would not get to permission check -
it would fail with ENOTDIR instead.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Avoids fun races in RCU pathwalk... Same goes for freeing LSM shite
hanging off super_block's arse.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
check_snapshot() copies the bch_snapshot to a temporary to easily handle
older versions that don't have all the fields of the current version,
but it lacked a min() to correctly handle keys newer and larger than the
current version.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If a journal write errored, the list of devices it was written to could
be empty - we're not supposed to mark an empty replicas list.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_direct_IO_read() checks the request offset and size for sector
alignment and then falls through to a couple calculations to shrink
the size of the request based on the inode size. The problem is that
these checks round up to the fs block size, which runs the risk of
underflowing iter->count if the block size happens to be large
enough. This is triggered by fstest generic/361 with a 4k block
size, which subsequently leads to a crash. To avoid this crash,
check that the shorten length doesn't exceed the overall length of
the iter.
Fixes:
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Su Yue <glass.su@suse.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If we're in FILTER_SNAPSHOTS mode and we start scanning a range of the
keyspace where no keys are visible in the current snapshot, we have a
problem - we'll scan for a very long time before scanning terminates.
Awhile back, this was fixed for most cases with peek_upto() (and
assertions that enforce that it's being used).
But the fix missed the fact that the inodes btree is different - every
key offset is in a different snapshot tree, not just the inode field.
Fixes:
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Recently, we fixed our __GFP_NOFAIL usage in the readahead path, but the
easy one in read_single_folio() (where wa can return an error) was
missed - oops.
Fixes:
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pull powerpc fixes from Michael Ellerman:
- Fix a crash when hot adding a PCI device to an LPAR since
recent changes
- Fix nested KVM level-2 guest reboot failure due to empty
'arch_compat'
Thanks to Amit Machhiwal, Aneesh Kumar K.V (IBM), Brian King, Gaurav
Batra, and Vaibhav Jain.
* tag 'powerpc-6.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV: Fix L2 guest reboot failure due to empty 'arch_compat'
powerpc/pseries/iommu: DLPAR add doesn't completely initialize pci_controller
Pull iommu fixes from Joerg Roedel:
- Intel VT-d fixes for nested domain handling:
- Cache invalidation for changes in a parent domain
- Dirty tracking setting for parent and nested domains
- Fix a constant-out-of-range warning
- ARM SMMU fixes:
- Fix CD allocation from atomic context when using SVA with SMMUv3
- Revert the conversion of SMMUv2 to domain_alloc_paging(), as it
breaks the boot for Qualcomm MSM8996 devices
- Restore SVA handle sharing in core code as it turned out there are
still drivers relying on it
* tag 'iommu-fixes-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/sva: Restore SVA handle sharing
iommu/arm-smmu-v3: Do not use GFP_KERNEL under as spinlock
iommu/vt-d: Fix constant-out-of-range warning
iommu/vt-d: Set SSADE when attaching to a parent with dirty tracking
iommu/vt-d: Add missing dirty tracking set for parent domain
iommu/vt-d: Wrap the dirty tracking loop to be a helper
iommu/vt-d: Remove domain parameter for intel_pasid_setup_dirty_tracking()
iommu/vt-d: Add missing device iotlb flush for parent domain
iommu/vt-d: Update iotlb in nested domain attach
iommu/vt-d: Add missing iotlb flush for parent domain
iommu/vt-d: Add __iommu_flush_iotlb_psi()
iommu/vt-d: Track nested domains in parent
Revert "iommu/arm-smmu: Convert to domain_alloc_paging()"
Pull cxl fixes from Dan Williams:
"A collection of significant fixes for the CXL subsystem.
The largest change in this set, that bordered on "new development", is
the fix for the fact that the location of the new qos_class attribute
did not match the Documentation. The fix ends up deleting more code
than it added, and it has a new unit test to backstop basic errors in
this interface going forward. So the "red-diff" and unit test saved
the "rip it out and try again" response.
In contrast, the new notification path for firmware reported CXL
errors (CXL CPER notifications) has a locking context bug that can not
be fixed with a red-diff. Given where the release cycle stands, it is
not comfortable to squeeze in that fix in these waning days. So, that
receives the "back it out and try again later" treatment.
There is a regression fix in the code that establishes memory NUMA
nodes for platform CXL regions. That has an ack from x86 folks. There
are a couple more fixups for Linux to understand (reassemble) CXL
regions instantiated by platform firmware. The policy around platforms
that do not match host-physical-address with system-physical-address
(i.e. systems that have an address translation mechanism between the
address range reported in the ACPI CEDT.CFMWS and endpoint decoders)
has been softened to abort driver load rather than teardown the memory
range (can cause system hangs). Lastly, there is a robustness /
regression fix for cases where the driver would previously continue in
the face of error, and a fixup for PCI error notification handling.
Summary:
- Fix NUMA initialization from ACPI CEDT.CFMWS
- Fix region assembly failures due to async init order
- Fix / simplify export of qos_class information
- Fix cxl_acpi initialization vs single-window-init failures
- Fix handling of repeated 'pci_channel_io_frozen' notifications
- Workaround platforms that violate host-physical-address ==
system-physical address assumptions
- Defer CXL CPER notification handling to v6.9"
* tag 'cxl-fixes-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/acpi: Fix load failures due to single window creation failure
acpi/ghes: Remove CXL CPER notifications
cxl/pci: Fix disabling memory if DVSEC CXL Range does not match a CFMWS window
cxl/test: Add support for qos_class checking
cxl: Fix sysfs export of qos_class for memdev
cxl: Remove unnecessary type cast in cxl_qos_class_verify()
cxl: Change 'struct cxl_memdev_state' *_perf_list to single 'struct cxl_dpa_perf'
cxl/region: Allow out of order assembly of autodiscovered regions
cxl/region: Handle endpoint decoders in cxl_region_find_decoder()
x86/numa: Fix the sort compare func used in numa_fill_memblks()
x86/numa: Fix the address overlap check in numa_fill_memblks()
cxl/pci: Skip to handle RAS errors if CXL.mem device is detached
Pull device mapper fix from Mike Snitzer:
- Fix DM integrity and verity targets to not use excessive stack when
they recheck in the error path.
* tag 'for-6.8/dm-fix-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-integrity, dm-verity: reduce stack usage for recheck
Pull SCSI fixes from James Bottomley:
"Six fixes: the four driver ones are pretty trivial.
The larger two core changes are to try to fix various USB attached
devices which have somewhat eccentric ways of handling the VPD and
other mode pages which necessitate multiple revalidates (that were
removed in the interests of efficiency) and updating the heuristic for
supported VPD pages"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: jazz_esp: Only build if SCSI core is builtin
scsi: smartpqi: Fix disable_managed_interrupts
scsi: ufs: Uninitialized variable in ufshcd_devfreq_target()
scsi: target: pscsi: Fix bio_put() for error case
scsi: core: Consult supported VPD page list prior to fetching page
scsi: sd: usb_storage: uas: Access media prior to querying device properties
Pull i2c fix from Wolfram Sang:
"A bugfix for host drivers"
* tag 'i2c-for-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: imx: when being a target, mark the last read as processed
Pull LoongArch fixes from Huacai Chen:
"Fix two cpu-hotplug issues, fix the init sequence about FDT system,
fix the coding style of dts, and fix the wrong CPUCFG ID handling of
KVM"
* tag 'loongarch-fixes-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Streamline kvm_check_cpucfg() and improve comments
LoongArch: KVM: Rename _kvm_get_cpucfg() to _kvm_get_cpucfg_mask()
LoongArch: KVM: Fix input validation of _kvm_get_cpucfg() & kvm_check_cpucfg()
LoongArch: dts: Minor whitespace cleanup
LoongArch: Call early_init_fdt_scan_reserved_mem() earlier
LoongArch: Update cpu_sibling_map when disabling nonboot CPUs
LoongArch: Disable IRQ before init_fn() for nonboot CPUs
The newly added integrity_recheck() function has another larger stack
allocation, just like its caller integrity_metadata(). When it gets
inlined, the combination of the two exceeds the warning limit for 32-bit
architectures and possibly risks an overflow when this is called from
a deep call chain through a file system:
drivers/md/dm-integrity.c:1767:13: error: stack frame size (1048) exceeds limit (1024) in 'integrity_metadata' [-Werror,-Wframe-larger-than]
1767 | static void integrity_metadata(struct work_struct *w)
Since the caller at this point is done using its checksum buffer,
just reuse the same buffer in the new function to avoid the double
allocation.
[Mikulas: add "noinline" to integrity_recheck and verity_recheck.
These functions are only called on error, so they shouldn't bloat the
stack frame or code size of the caller.]
Fixes: c88f5e553f ("dm-integrity: recheck the integrity tag after a failure")
Fixes: 9177f3c0de ("dm-verity: recheck the hash after a failure")
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
There is a loophole in pstate limit clamping for the intel_cpufreq CPU
frequency scaling driver (intel_pstate in passive mode), schedutil CPU
frequency scaling governor, HWP (HardWare Pstate) control enabled, when
the adjust_perf call back path is used.
Fix it.
Fixes: a365ab6b9d cpufreq: intel_pstate: Implement the ->adjust_perf() callback
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Architectures like powerpc add debug checks to ensure we find only devmap
PUD pte entries. These debug checks are only done with CONFIG_DEBUG_VM.
This patch marks the ptes used for PUD advanced test devmap pte entries so
that we don't hit on debug checks on architecture like ppc64 as below.
WARNING: CPU: 2 PID: 1 at arch/powerpc/mm/book3s64/radix_pgtable.c:1382 radix__pud_hugepage_update+0x38/0x138
....
NIP [c0000000000a7004] radix__pud_hugepage_update+0x38/0x138
LR [c0000000000a77a8] radix__pudp_huge_get_and_clear+0x28/0x60
Call Trace:
[c000000004a2f950] [c000000004a2f9a0] 0xc000000004a2f9a0 (unreliable)
[c000000004a2f980] [000d34c100000000] 0xd34c100000000
[c000000004a2f9a0] [c00000000206ba98] pud_advanced_tests+0x118/0x334
[c000000004a2fa40] [c00000000206db34] debug_vm_pgtable+0xcbc/0x1c48
[c000000004a2fc10] [c00000000000fd28] do_one_initcall+0x60/0x388
Also
kernel BUG at arch/powerpc/mm/book3s64/pgtable.c:202!
....
NIP [c000000000096510] pudp_huge_get_and_clear_full+0x98/0x174
LR [c00000000206bb34] pud_advanced_tests+0x1b4/0x334
Call Trace:
[c000000004a2f950] [000d34c100000000] 0xd34c100000000 (unreliable)
[c000000004a2f9a0] [c00000000206bb34] pud_advanced_tests+0x1b4/0x334
[c000000004a2fa40] [c00000000206db34] debug_vm_pgtable+0xcbc/0x1c48
[c000000004a2fc10] [c00000000000fd28] do_one_initcall+0x60/0x388
Link: https://lkml.kernel.org/r/20240129060022.68044-1-aneesh.kumar@kernel.org
Fixes: 27af67f356 ("powerpc/book3s64/mm: enable transparent pud hugepage")
Signed-off-by: Aneesh Kumar K.V (IBM) <aneesh.kumar@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In cachestat, we access the folio from the page cache's xarray to compute
its page offset, and check for its dirty and writeback flags. However, we
do not hold a reference to the folio before performing these actions,
which means the folio can concurrently be released and reused as another
folio/page/slab.
Get around this altogether by just using xarray's existing machinery for
the folio page offsets and dirty/writeback states.
This changes behavior for tmpfs files to now always report zeroes in their
dirty and writeback counters. This is okay as tmpfs doesn't follow
conventional writeback cache behavior: its pages get "cleaned" during
swapout, after which they're no longer resident etc.
Link: https://lkml.kernel.org/r/20240220153409.GA216065@cmpxchg.org
Fixes: cf264e1329 ("cachestat: implement cachestat syscall")
Reported-by: Jann Horn <jannh@google.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Jann Horn <jannh@google.com>
Cc: <stable@vger.kernel.org> [6.4+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Recently there have been a number of patches which have affected various
aspects of the memory mapping logic as implemented in mm/mmap.c where it
would have been useful for regular contributors to have been notified.
Add an entry for this part of mm in particular with regular contributors
tagged as reviewers.
Link: https://lkml.kernel.org/r/20240220064410.4639-1-lstoakes@gmail.com
Signed-off-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This partially reverts commits cc478e0b6b, 63b85ac56a, 08d7c94d96,
a414d4286f, and 773688a6cb to make use of variable-sized stack depot
records, since eviction of stack entries from stack depot forces fixed-
sized stack records. Care was taken to retain the code cleanups by the
above commits.
Eviction was added to generic KASAN as a response to alleviating the
additional memory usage from fixed-sized stack records, but this still
uses more memory than previously.
With the re-introduction of variable-sized records for stack depot, we can
just switch back to non-evictable stack records again, and return back to
the previous performance and memory usage baseline.
Before (observed after a KASAN kernel boot):
pools: 597
refcounted_allocations: 17547
refcounted_frees: 6477
refcounted_in_use: 11070
freelist_size: 3497
persistent_count: 12163
persistent_bytes: 1717008
After:
pools: 319
refcounted_allocations: 0
refcounted_frees: 0
refcounted_in_use: 0
freelist_size: 0
persistent_count: 29397
persistent_bytes: 5183536
As can be seen from the counters, with a generic KASAN config, refcounted
allocations and evictions are no longer used. Due to using variable-sized
records, I observe a reduction of 278 stack depot pools (saving 4448 KiB)
with my test setup.
Link: https://lkml.kernel.org/r/20240129100708.39460-2-elver@google.com
Fixes: cc478e0b6b ("kasan: avoid resetting aux_lock")
Fixes: 63b85ac56a ("kasan: stop leaking stack trace handles")
Fixes: 08d7c94d96 ("kasan: memset free track in qlink_free")
Fixes: a414d4286f ("kasan: handle concurrent kasan_record_aux_stack calls")
Fixes: 773688a6cb ("kasan: use stack_depot_put for Generic mode")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The bit-sliced implementation of AES-CTR operates on blocks of 128
bytes, and will fall back to the plain NEON version for tail blocks or
inputs that are shorter than 128 bytes to begin with.
It will call straight into the plain NEON asm helper, which performs all
memory accesses in granules of 16 bytes (the size of a NEON register).
For this reason, the associated plain NEON glue code will copy inputs
shorter than 16 bytes into a temporary buffer, given that this is a rare
occurrence and it is not worth the effort to work around this in the asm
code.
The fallback from the bit-sliced NEON version fails to take this into
account, potentially resulting in out-of-bounds accesses. So clone the
same workaround, and use a temp buffer for short in/outputs.
Fixes: fc074e1300 ("crypto: arm64/aes-neonbs-ctr - fallback to plain NEON for final chunk")
Cc: <stable@vger.kernel.org>
Reported-by: syzbot+f1ceaa1a09ab891e1934@syzkaller.appspotmail.com
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The lskcipher glue code for skcipher needs to copy the IV every
time rather than only on the first and last request. Otherwise
those algorithms that use IV to perform chaining may break, e.g.,
CBC.
This is because crypto_skcipher_import/export do not include the
IV as part of the saved state.
Reported-by: syzbot+b90b904ef6bdfdafec1d@syzkaller.appspotmail.com
Fixes: 662ea18d08 ("crypto: skcipher - Make use of internal state")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When being a target, NAK from the controller means that all bytes have
been transferred. So, the last byte needs also to be marked as
'processed'. Otherwise index registers of backends may not increase.
Fixes: f7414cd692 ("i2c: imx: support slave mode for imx I2C driver")
Signed-off-by: Corey Minyard <minyard@acm.org>
Tested-by: Andrew Manley <andrew.manley@sealingtech.com>
Reviewed-by: Andrew Manley <andrew.manley@sealingtech.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
[wsa: fixed comment and commit message to properly describe the case]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
In apparmor_getselfattr() when an invalid AppArmor attribute is
requested, or a value hasn't been explicitly set for the requested
attribute, the label passed to aa_put_label() is not properly
initialized which can cause problems when the pointer value is non-NULL
and AppArmor attempts to drop a reference on the bogus label object.
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: John Johansen <john.johansen@canonical.com>
Fixes: 223981db9b ("AppArmor: Add selfattr hooks")
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Reviewed-by: Paul Moore <paul@paul-moore.com>
[PM: description changes as discussed with MS]
Signed-off-by: Paul Moore <paul@paul-moore.com>
selinux_getselfattr() doesn't properly initialize the string pointer
it passes to selinux_lsm_getattr() which can cause a problem when an
attribute hasn't been explicitly set; selinux_lsm_getattr() returns
0/success, but does not set or initialize the string label/attribute.
Failure to properly initialize the string causes problems later in
selinux_getselfattr() when the function attempts to kfree() the
string.
Cc: Casey Schaufler <casey@schaufler-ca.com>
Fixes: 762c934317 ("SELinux: Add selfattr hooks")
Suggested-by: Paul Moore <paul@paul-moore.com>
[PM: description changes as discussed in the thread]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Pull parisc architecture fixes from Helge Deller:
"Fixes CPU hotplug, the parisc stack unwinder and two possible build
errors in kprobes and ftrace area:
- Fix CPU hotplug
- Fix unaligned accesses and faults in stack unwinder
- Fix potential build errors by always including asm-generic/kprobes.h
- Fix build bug by add missing CONFIG_DYNAMIC_FTRACE check"
* tag 'parisc-for-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix stack unwinder
parisc/kprobes: always include asm-generic/kprobes.h
parisc/ftrace: add missing CONFIG_DYNAMIC_FTRACE check
Revert "parisc: Only list existing CPUs in cpu_possible_mask"
Pull arm and RISC-V SoC fixes from Arnd Bergmann:
"The Rockchip and IMX8 platforms get a number of fixes for dts files in
order to address some misconfigurations, including a regression for
USB-C support on some boards.
The other dts fixes are part of a series by Rob Herring to clean up
another class of dtc compiler warnings across all platforms, with a
few others helping out as well. With this, we can enable the warning
for the coming merge window without introducing regressions.
Conor Dooley has collected fixes for RISC-V platforms, both for the
dts files and for platofrm specific drivers.
The ep93xx platform gets a regression for for its gpio descriptors"
* tag 'arm-fixes-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits)
ARM: dts: renesas: rcar-gen2: Add missing #interrupt-cells to DA9063 nodes
cache: ax45mp_cache: Align end size to cache boundary in ax45mp_dma_cache_wback()
arm64: dts: qcom: Fix interrupt-map cell sizes
arm: dts: Fix dtc interrupt_map warnings
arm64: dts: Fix dtc interrupt_provider warnings
arm: dts: Fix dtc interrupt_provider warnings
arm64: dts: freescale: Disable interrupt_map check
ARM: ep93xx: Add terminator to gpiod_lookup_table
riscv: dts: sifive: add missing #interrupt-cells to pmic
arm64: dts: rockchip: Correct Indiedroid Nova GPIO Names
arm64: dts: rockchip: Drop interrupts property from rk3328 pwm-rockchip node
arm64: dts: rockchip: set num-cs property for spi on px30
arm64: dts: rockchip: minor rk3588 whitespace cleanup
riscv: dts: starfive: replace underscores in node names
bus: imx-weim: fix valid range check
Revert "arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector"
Revert "arm64: dts: imx8mp-dhcom-pdk3: Describe the USB-C connector"
arm64: dts: tqma8mpql: fix audio codec iov-supply
arm64: dts: rockchip: drop unneeded status from rk3588-jaguar gpio-leds
ARM: dts: rockchip: Drop interrupts property from pwm-rockchip nodes
...
Pull arm64 fixes from Will Deacon:
"A simple fix to a definition in the CXL PMU driver, a couple of
patches to restore SME control registers on the resume path (since
Arm's fast model now clears them) and a revert for our jump label asm
constraints after Geert noticed they broke the build with GCC 5.5.
There was then the ensuing discussion about raising the minimum GCC
(and corresponding binutils) versions at [1], but for now we'll keep
things working as they were until that goes ahead.
- Revert fix to jump label asm constraints, as it regresses the build
with some GCC 5.5 toolchains.
- Restore SME control registers when resuming from suspend
- Fix incorrect filter definition in CXL PMU driver"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/sme: Restore SMCR_EL1.EZT0 on exit from suspend
arm64/sme: Restore SME registers on exit from suspend
Revert "arm64: jump_label: use constraints "Si" instead of "i""
perf: CXL: fix CPMU filter value mask length
Retry page faults without acquiring mmu_lock, and without even faulting
the page into the primary MMU, if the resolved gfn is covered by an active
invalidation. Contending for mmu_lock is especially problematic on
preemptible kernels as the mmu_notifier invalidation task will yield
mmu_lock (see rwlock_needbreak()), delay the in-progress invalidation, and
ultimately increase the latency of resolving the page fault. And in the
worst case scenario, yielding will be accompanied by a remote TLB flush,
e.g. if the invalidation covers a large range of memory and vCPUs are
accessing addresses that were already zapped.
Faulting the page into the primary MMU is similarly problematic, as doing
so may acquire locks that need to be taken for the invalidation to
complete (the primary MMU has finer grained locks than KVM's MMU), and/or
may cause unnecessary churn (getting/putting pages, marking them accessed,
etc).
Alternatively, the yielding issue could be mitigated by teaching KVM's MMU
iterators to perform more work before yielding, but that wouldn't solve
the lock contention and would negatively affect scenarios where a vCPU is
trying to fault in an address that is NOT covered by the in-progress
invalidation.
Add a dedicated lockess version of the range-based retry check to avoid
false positives on the sanity check on start+end WARN, and so that it's
super obvious that checking for a racing invalidation without holding
mmu_lock is unsafe (though obviously useful).
Wrap mmu_invalidate_in_progress in READ_ONCE() to ensure that pre-checking
invalidation in a loop won't put KVM into an infinite loop, e.g. due to
caching the in-progress flag and never seeing it go to '0'.
Force a load of mmu_invalidate_seq as well, even though it isn't strictly
necessary to avoid an infinite loop, as doing so improves the probability
that KVM will detect an invalidation that already completed before
acquiring mmu_lock and bailing anyways.
Do the pre-check even for non-preemptible kernels, as waiting to detect
the invalidation until mmu_lock is held guarantees the vCPU will observe
the worst case latency in terms of handling the fault, and can generate
even more mmu_lock contention. E.g. the vCPU will acquire mmu_lock,
detect retry, drop mmu_lock, re-enter the guest, retake the fault, and
eventually re-acquire mmu_lock. This behavior is also why there are no
new starvation issues due to losing the fairness guarantees provided by
rwlocks: if the vCPU needs to retry, it _must_ drop mmu_lock, i.e. waiting
on mmu_lock doesn't guarantee forward progress in the face of _another_
mmu_notifier invalidation event.
Note, adding READ_ONCE() isn't entirely free, e.g. on x86, the READ_ONCE()
may generate a load into a register instead of doing a direct comparison
(MOV+TEST+Jcc instead of CMP+Jcc), but practically speaking the added cost
is a few bytes of code and maaaaybe a cycle or three.
Reported-by: Yan Zhao <yan.y.zhao@intel.com>
Closes: https://lore.kernel.org/all/ZNnPF4W26ZbAyGto@yzhao56-desk.sh.intel.com
Reported-by: Friedrich Weber <f.weber@proxmox.com>
Cc: Kai Huang <kai.huang@intel.com>
Cc: Yan Zhao <yan.y.zhao@intel.com>
Cc: Yuan Yao <yuan.yao@linux.intel.com>
Cc: Xu Yilun <yilun.xu@linux.intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20240222012640.2820927-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Pull s390 fixes from Heiko Carstens:
- Fix invalid -EBUSY on ccw_device_start() which can lead to failing
device initialization
- Add missing multiplication by 8 in __iowrite64_copy() to get the
correct byte length before calling zpci_memcpy_toio()
- Various config updates
* tag 's390-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: fix invalid -EBUSY on ccw_device_start
s390: use the correct count for __iowrite64_copy()
s390/configs: update default configurations
s390/configs: enable INIT_STACK_ALL_ZERO in all configurations
s390/configs: provide compat topic configuration target
Pull misc fixes from Andrew Morton:
"A batch of MM (and one non-MM) hotfixes.
Ten are cc:stable and the remainder address post-6.7 issues or aren't
considered appropriate for backporting"
* tag 'mm-hotfixes-stable-2024-02-22-15-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
kasan: guard release_free_meta() shadow access with kasan_arch_is_ready()
mm/damon/lru_sort: fix quota status loss due to online tunings
mm/damon/reclaim: fix quota stauts loss due to online tunings
MAINTAINERS: mailmap: update Shakeel's email address
mm/damon/sysfs-schemes: handle schemes sysfs dir removal before commit_schemes_quota_goals
mm: memcontrol: clarify swapaccount=0 deprecation warning
mm/memblock: add MEMBLOCK_RSRV_NOINIT into flagname[] array
mm/zswap: invalidate duplicate entry when !zswap_enabled
lib/Kconfig.debug: TEST_IOV_ITER depends on MMU
mm/swap: fix race when skipping swapcache
mm/swap_state: update zswap LRU's protection range with the folio locked
selftests/mm: uffd-unit-test check if huge page size is 0
mm/damon/core: check apply interval in damon_do_apply_schemes()
mm: zswap: fix missing folio cleanup in writeback race path
Pull device mapper fixes from Mike Snitzer:
- Stable fixes for 3 DM targets (integrity, verity and crypt) to
address systemic failure that can occur if user provided pages map to
the same block.
- Fix DM crypt to not allow modifying data that being encrypted for
authenticated encryption.
- Fix DM crypt and verity targets to align their respective bvec_iter
struct members to avoid the need for byte level access (due to
__packed attribute) that is costly on some arches (like RISC).
* tag 'for-6.8/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-crypt, dm-integrity, dm-verity: bump target version
dm-verity, dm-crypt: align "struct bvec_iter" correctly
dm-crypt: recheck the integrity tag after a failure
dm-crypt: don't modify the data when using authenticated encryption
dm-verity: recheck the hash after a failure
dm-integrity: recheck the integrity tag after a failure
Pull drm fixes from Dave Airlie:
"This is the weekly drm fixes. Non-drivers there is a fbdev/sparc fix,
syncobj, ttm and buddy fixes.
On the driver side, ivpu, meson, i915 have a small fix each. Then
amdgpu and xe have a bunch. Nouveau has some minor uapi additions to
give userspace some useful info along with a Kconfig change to allow
the new GSP firmware paths to be used by default on the GPUs it
supports.
Seems about the usual amount for this time of release cycle.
fbdev:
- fix sparc undefined reference
syncobj:
- fix sync obj fence waiting
- handle NULL fence in syncobj eventfd code
ttm:
- fix invalid free
buddy:
- fix list handling
- fix 32-bit build
meson:
- don't remove bridges from other drivers
nouveau:
- fix build warnings
- add two minor info parameters
- add a Kconfig to allow GSP by default on some GPUs
ivpu:
- allow fw to do initial tile config
i915:
- fix TV mode
amdgpu:
- Suspend/resume fixes
- Backlight error fix
- DCN 3.5 fixes
- Misc fixes
xe:
- Remove support for persistent exec_queues
- Drop a reduntant sysfs newline printout
- A three-patch fix for a VM_BIND rebind optimization path
- Fix a modpost warning on an xe KUNIT module"
* tag 'drm-fixes-2024-02-23' of git://anongit.freedesktop.org/drm/drm: (27 commits)
nouveau: add an ioctl to report vram usage
nouveau: add an ioctl to return vram bar size.
nouveau/gsp: add kconfig option to enable GSP paths by default
drm/amdgpu: Fix the runtime resume failure issue
drm/amd/display: fix null-pointer dereference on edid reading
drm/amd/display: Fix memory leak in dm_sw_fini()
drm/amd/display: fix input states translation error for dcn35 & dcn351
drm/amd/display: Fix potential null pointer dereference in dc_dmub_srv
drm/amd/display: Only allow dig mapping to pwrseq in new asic
drm/amd/display: adjust few initialization order in dm
drm/syncobj: handle NULL fence in syncobj_eventfd_entry_func
drm/syncobj: call drm_syncobj_fence_add_wait when WAIT_AVAILABLE flag is set
drm/ttm: Fix an invalid freeing on already freed page in error path
sparc: Fix undefined reference to fb_is_primary_device
drm/xe: Fix modpost warning on xe_mocs kunit module
drm/xe/xe_gt_idle: Drop redundant newline in name
drm/xe: Return 2MB page size for compact 64k PTEs
drm/xe: Add XE_VMA_PTE_64K VMA flag
drm/xe: Fix xe_vma_set_pte_size
drm/xe/uapi: Remove support for persistent exec_queues
...
Pull ata fixes from Niklas Cassel:
- Do not try to set a sleeping device to standby. Sleep is a deeper
sleep state than standby, and needs a reset to wake up the drive. A
system resume will reset the port. Sending a command other than reset
to a sleeping device is not wise, as the command will timeout (Damien
Le Moal)
- Do not try to put a device to standby twice during system shutdown.
ata_dev_power_set_standby() is currently called twice during
shutdown, once after the scsi device is removed, and another when
ata_pci_shutdown_one() executes. Modify ata_dev_power_set_standby()
to do nothing if the device is already in standby (Damien Le Moal)
- Add a quirk for ASM1064 to fixup the number of implemented ports. We
probe all ports that the hardware reports to be implemented. Probing
ports that are not implemented causes significantly increased boot
time (Andrey Jr. Melnikov)
- Fix error handling for the ahci_ceva driver. Ensure that the
ahci_ceva driver does a proper cleanup of its resources in the error
path (Radhey Shyam Pandey)
* tag 'ata-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: Do not call ata_dev_power_set_standby() twice
ata: ahci_ceva: fix error handling for Xilinx GT PHY support
ahci: asm1064: correct count of reported ports
ata: libata-core: Do not try to set sleeping devices to standby
Pull gpio fix from Bartosz Golaszewski:
- fix a use-case where no pins are mapped to GPIOs in
gpiochip_generic_config()
* tag 'gpio-fixes-for-v6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: Handle no pin_ranges in gpiochip_generic_config()
Before attempting to support the pre-ratification version of vector
found on older T-Head CPUs, disallow "v" in riscv,isa on these
platforms. The deprecated property has no clear way to communicate
the specific version of vector that is supported and much of the vendor
provided software puts "v" in the isa string. riscv,isa-extensions
should be used instead. This should not be too much of a burden for
these systems, as the vendor shipped devicetrees and firmware do not
work with a mainline kernel and will require updating.
We can limit this restriction to only ignore v in riscv,isa on CPUs
that report T-Head's vendor ID and a zero marchid. Newer T-Head CPUs
that support the ratified version of vector should report non-zero
marchid, according to Guo Ren [1].
Link: https://lore.kernel.org/linux-riscv/CAJF2gTRy5eK73=d6s7CVy9m9pB8p4rAoMHM3cZFwzg=AuF7TDA@mail.gmail.com/ [1]
Fixes: dc6667a4e7 ("riscv: Extending cpufeature.c to detect V-extension")
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20240223-tidings-shabby-607f086cb4d7@spud
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Pull hwmon fix from Guenter Roeck:
"Fix a global-out-of-bounds bug in nct6775 driver"
* tag 'hwmon-for-v6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (nct6775) Fix access to temperature configuration registers
Prior to commit 092edaddb6 ("iommu: Support mm PASID 1:n with sva
domains") the code allowed a SVA handle to be bound multiple times to the
same (mm, device) pair. This was alluded to in the kdoc comment, but we
had understood this to be more a remark about allowing multiple devices,
not a literal same-driver re-opening the same SVA.
It turns out uacce and idxd were both relying on the core code to handle
reference counting for same-device same-mm scenarios. As this looks hard
to resolve in the drivers bring it back to the core code.
The new design has changed the meaning of the domain->users refcount to
refer to the number of devices that are sharing that domain for the same
mm. This is part of the design to lift the SVA domain de-duplication out
of the drivers.
Return the old behavior by explicitly de-duplicating the struct iommu_sva
handle. The same (mm, device) will return the same handle pointer and the
core code will handle tracking this. The last unbind of the handle will
destroy it.
Fixes: 092edaddb6 ("iommu: Support mm PASID 1:n with sva domains")
Reported-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Closes: https://lore.kernel.org/all/20240221110658.529-1-zhangfei.gao@linaro.org/
Tested-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/0-v1-9455fc497a6f+3b4-iommu_sva_sharing_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Arm SMMU fixes for 6.8
- Fix CD allocation from atomic context when using SVA with SMMUv3
- Revert the conversion of SMMUv2 to domain_alloc_paging(), as it
breaks the boot for Qualcomm MSM8996 devices
A recent DRM series purporting to simplify support for "transparent
bridges" and handling of probe deferrals ironically exposed a
use-after-free issue on pmic_glink_altmode probe deferral.
This has manifested itself as the display subsystem occasionally failing
to initialise and NULL-pointer dereferences during boot of machines like
the Lenovo ThinkPad X13s.
Specifically, the dp-hpd bridge is currently registered before all
resources have been acquired which means that it can also be
deregistered on probe deferrals.
In the meantime there is a race window where the new aux bridge driver
(or PHY driver previously) may have looked up the dp-hpd bridge and
stored a (non-reference-counted) pointer to the bridge which is about to
be deallocated.
When the display controller is later initialised, this triggers a
use-after-free when attaching the bridges:
dp -> aux -> dp-hpd (freed)
which may, for example, result in the freed bridge failing to attach:
[drm:drm_bridge_attach [drm]] *ERROR* failed to attach bridge /soc@0/phy@88eb000 to encoder TMDS-31: -16
or a NULL-pointer dereference:
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
...
Call trace:
drm_bridge_attach+0x70/0x1a8 [drm]
drm_aux_bridge_attach+0x24/0x38 [aux_bridge]
drm_bridge_attach+0x80/0x1a8 [drm]
dp_bridge_init+0xa8/0x15c [msm]
msm_dp_modeset_init+0x28/0xc4 [msm]
The DRM bridge implementation is clearly fragile and implicitly built on
the assumption that bridges may never go away. In this case, the fix is
to move the bridge registration in the pmic_glink_altmode driver to
after all resources have been looked up.
Incidentally, with the new dp-hpd bridge implementation, which registers
child devices, this is also a requirement due to a long-standing issue
in driver core that can otherwise lead to a probe deferral loop (see
commit fbc35b45f9 ("Add documentation on meaning of -EPROBE_DEFER")).
[DB: slightly fixed commit message by adding the word 'commit']
Fixes: 080b4e2485 ("soc: qcom: pmic_glink: Introduce altmode support")
Fixes: 2bcca96abf ("soc: qcom: pmic-glink: switch to DRM_AUX_HPD_BRIDGE")
Cc: <stable@vger.kernel.org> # 6.3
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240217150228.5788-4-johan+linaro@kernel.org
Combining allocation and registration is an anti-pattern that should be
avoided. Add two new functions for allocating and registering an dp-hpd
bridge with a proper 'devm' prefix so that it is clear that these are
device managed interfaces.
devm_drm_dp_hpd_bridge_alloc()
devm_drm_dp_hpd_bridge_add()
The new interface will be used to fix a use-after-free bug in the
Qualcomm PMIC GLINK driver and may prevent similar issues from being
introduced elsewhere.
The existing drm_dp_hpd_bridge_register() is reimplemented using the
above and left in place for now.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240217150228.5788-3-johan+linaro@kernel.org
snd_soc_card_get_kcontrol() must be holding a read lock on
card->controls_rwsem while walking the controls list.
Compare with snd_ctl_find_numid().
The existing function is renamed snd_soc_card_get_kcontrol_locked()
so that it can be called from contexts that are already holding
card->controls_rwsem (for example, control get/put functions).
There are few direct or indirect callers of
snd_soc_card_get_kcontrol(), and most are safe. Three require
changes, which have been included in this patch:
codecs/cs35l45.c:
cs35l45_activate_ctl() is called from a control put() function so
is changed to call snd_soc_card_get_kcontrol_locked().
codecs/cs35l56.c:
cs35l56_sync_asp1_mixer_widgets_with_firmware() is called from
control get()/put() functions so is changed to call
snd_soc_card_get_kcontrol_locked().
fsl/fsl_xcvr.c:
fsl_xcvr_activate_ctl() is called from three places, one of which
already holds card->controls_rwsem:
1. fsl_xcvr_mode_put(), a control put function, which will
already be holding card->controls_rwsem.
2. fsl_xcvr_startup(), a DAI startup function.
3. fsl_xcvr_shutdown(), a DAI shutdown function.
To fix this, fsl_xcvr_activate_ctl() has been changed to call
snd_soc_card_get_kcontrol_locked() so that it is safe to call
directly from fsl_xcvr_mode_put().
The fsl_xcvr_startup() and fsl_xcvr_shutdown() functions have been
changed to take a read lock on card->controls_rsem() around calls
to fsl_xcvr_activate_ctl(). While this is not very elegant, it
keeps the change small, to avoid this patch creating a large
collateral churn in fsl/fsl_xcvr.c.
Analysis of other callers of snd_soc_card_get_kcontrol() is that
they do not need any changes, they are not holding card->controls_rwsem
when they call snd_soc_card_get_kcontrol().
Direct callers of snd_soc_card_get_kcontrol():
fsl/fsl_spdif.c: fsl_spdif_dai_probe() - DAI probe function
fsl/fsl_micfil.c: voice_detected_fn() - IRQ handler
Indirect callers via soc_component_notify_control():
codecs/cs42l43: cs42l43_mic_shutter() - IRQ handler
codecs/cs42l43: cs42l43_spk_shutter() - IRQ handler
codecs/ak4118.c: ak4118_irq_handler() - IRQ handler
codecs/wm_adsp.c: wm_adsp_write_ctl() - not currently used
Indirect callers via snd_soc_limit_volume():
qcom/sc8280xp.c: sc8280xp_snd_init() - DAIlink init function
ti/rx51.c: rx51_aic34_init() - DAI init function
I don't have hardware to test the fsl/*, qcom/sc828xp.c, ti/rx51.c
and ak4118.c changes.
Backport note:
The fsl/, qcom/, cs35l45, cs35l56 and cs42l43 callers were added
since the Fixes commit so won't all be present on older kernels.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 209c6cdfd2 ("ASoC: soc-card: move snd_soc_card_get_kcontrol() to soc-card")
Link: https://lore.kernel.org/r/20240221123710.690224-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
RISC-V Devicetree fixes for v6.8-rc6
Two fixes for W=2 issues in devicetrees, which should constitute fixes
for all reasonable-to-fix W=2 problems on RISC-V. The others are caused
by standard USB and MMC property names containing underscores that are
not likely to ever change.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-dt-fixes-for-v6.8-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
riscv: dts: sifive: add missing #interrupt-cells to pmic
riscv: dts: starfive: replace underscores in node names
Link: https://lore.kernel.org/r/20240221-foil-glade-09dbf1aa3fe2@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit 3ce4f9c3fb ("net/ps3_gelic_net: Add gelic_descr structures") of
6.8-rc1 had a copy-and-paste error where the pointer that holds the
allocated SKB (struct gelic_descr.skb) was set to NULL after the SKB was
allocated. This resulted in a kernel panic when the SKB pointer was
accessed.
This fix moves the initialization of the gelic_descr to before the SKB
is allocated.
Reported-by: sambat goson <sombat3960@gmail.com>
Fixes: 3ce4f9c3fb ("net/ps3_gelic_net: Add gelic_descr structures")
Signed-off-by: Geoff Levand <geoff@infradead.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since commit 5d93cfcf73 ("net: dpaa: Convert to phylink"), we support
the "10gbase-r" phy-mode through a driver-based conversion of "xgmii",
but we still don't actually support it when the device tree specifies
"10gbase-r" proper.
This is because boards such as LS1046A-RDB do not define pcs-handle-names
(for whatever reason) in the ethernet@f0000 device tree node, and the
code enters through this code path:
err = of_property_match_string(mac_node, "pcs-handle-names", "xfi");
// code takes neither branch and falls through
if (err >= 0) {
(...)
} else if (err != -EINVAL && err != -ENODATA) {
goto _return_fm_mac_free;
}
(...)
/* For compatibility, if pcs-handle-names is missing, we assume this
* phy is the first one in pcsphy-handle
*/
err = of_property_match_string(mac_node, "pcs-handle-names", "sgmii");
if (err == -EINVAL || err == -ENODATA)
pcs = memac_pcs_create(mac_node, 0); // code takes this branch
else if (err < 0)
goto _return_fm_mac_free;
else
pcs = memac_pcs_create(mac_node, err);
// A default PCS is created and saved in "pcs"
// This determination fails and mistakenly saves the default PCS
// memac->sgmii_pcs instead of memac->xfi_pcs, because at this
// stage, mac_dev->phy_if == PHY_INTERFACE_MODE_10GBASER.
if (err && mac_dev->phy_if == PHY_INTERFACE_MODE_XGMII)
memac->xfi_pcs = pcs;
else
memac->sgmii_pcs = pcs;
In other words, in the absence of pcs-handle-names, the default
xfi_pcs assignment logic only works when in the device tree we have
PHY_INTERFACE_MODE_XGMII.
By reversing the order between the fallback xfi_pcs assignment and the
"xgmii" overwrite with "10gbase-r", we are able to support both values
in the device tree, with identical behavior.
Currently, it is impossible to make the s/xgmii/10gbase-r/ device tree
conversion, because it would break forward compatibility (new device
tree with old kernel). The only way to modify existing device trees to
phy-interface-mode = "10gbase-r" is to fix stable kernels to accept this
value and handle it properly.
One reason why the conversion is desirable is because with pre-phylink
kernels, the Aquantia PHY driver used to warn about the improper use
of PHY_INTERFACE_MODE_XGMII [1]. It is best to have a single (latest)
device tree that works with all supported stable kernel versions.
Note that the blamed commit does not constitute a regression per se.
Older stable kernels like 6.1 still do not work with "10gbase-r", but
for a different reason. That is a battle for another time.
[1] https://lore.kernel.org/netdev/20240214-ls1046-dts-use-10gbase-r-v1-1-8c2d68547393@concurrent-rt.com/
Fixes: 5d93cfcf73 ("net: dpaa: Convert to phylink")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Do the cache flush of converted pages in svm_register_enc_region() before
dropping kvm->lock to fix use-after-free issues where region and/or its
array of pages could be freed by a different task, e.g. if userspace has
__unregister_enc_region_locked() already queued up for the region.
Note, the "obvious" alternative of using local variables doesn't fully
resolve the bug, as region->pages is also dynamically allocated. I.e. the
region structure itself would be fine, but region->pages could be freed.
Flushing multiple pages under kvm->lock is unfortunate, but the entire
flow is a rare slow path, and the manual flush is only needed on CPUs that
lack coherency for encrypted memory.
Fixes: 19a23da539 ("Fix unsynchronized access to sev members through svm_register_enc_region")
Reported-by: Gabe Kirkpatrick <gkirkpatrick@google.com>
Cc: Josh Eads <josheads@google.com>
Cc: Peter Gonda <pgonda@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20240217013430.2079561-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Return used most significant bits from sample bit-width rather than the whole
physical sample word size. The starting bit offset is defined in the format
itself.
The behaviour is not changed for 32-bit formats like S32_LE. But with this
change - msbits value 24 instead 32 is returned for 24-bit formats like S24_LE
etc.
Also, commit 2112aa0349 ("ALSA: pcm: Introduce MSBITS subformat interface")
compares sample bit-width not physical sample bit-width to reset MSBITS_MAX bit
from the subformat bitmask.
Probably no applications are using msbits value for other than S32_LE/U32_LE
formats, because no drivers are reducing msbits value for other formats (with
the msb offset) at the moment.
For sanity, increase PCM protocol version, letting the user space to detect
the changed behaviour.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20240222173649.1447549-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a station has not been uploaded yet, receiving SMPS or channel width
notification action frames can lead to rate_control_rate_update calling
drv_sta_rc_update with uninitialized driver private data.
Fix this by adding a missing check for sta->uploaded.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://msgid.link/20240221140535.16102-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The PTDMA driver sets DMA masks in two different places for the same
device inconsistently. First call is in pt_pci_probe(), where it uses
48bit mask. The second call is in pt_dmaengine_register(), where it
uses a 64bit mask. Using 64bit dma mask causes IO_PAGE_FAULT errors
on DMA transfers between main memory and other devices.
Without the extra call it works fine. Additionally the second call
doesn't check the return value so it can silently fail.
Remove the superfluous dma_set_mask() call and only use 48bit mask.
Cc: stable@vger.kernel.org
Fixes: b0b4a6b105 ("dmaengine: ptdma: register PTDMA controller as a DMA resource")
Reviewed-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Signed-off-by: Tadeusz Struk <tstruk@gigaio.com>
Link: https://lore.kernel.org/r/20240222163053.13842-1-tstruk@gigaio.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
All the checks currently done in kvm_check_cpucfg can be realized with
early returns, so just do that to avoid extra cognitive burden related
to the return value handling.
While at it, clean up comments of _kvm_get_cpucfg_mask() and
kvm_check_cpucfg(), by removing comments that are merely restatement of
the code nearby, and paraphrasing the rest so they read more natural for
English speakers (that likely are not familiar with the actual Chinese-
influenced grammar).
No functional changes intended.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The function is not actually a getter of guest CPUCFG, but rather
validation of the input CPUCFG ID plus information about the supported
bit flags of that CPUCFG leaf. So rename it to avoid confusion.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The range check for the CPUCFG ID is wrong (should have been a ||
instead of &&) and useless in effect, so fix the obvious mistake.
Furthermore, the juggling of the temp return value is unnecessary,
because it is semantically equivalent and more readable to just
return at every switch case's end. This is done too to avoid potential
bugs in the future related to the unwanted complexity.
Also, the return value of _kvm_get_cpucfg is meant to be checked, but
this was not done, so bad CPUCFG IDs wrongly fall back to the default
case and 0 is incorrectly returned; check the return value to fix the
UAPI behavior.
While at it, also remove the redundant range check in kvm_check_cpucfg,
because out-of-range CPUCFG IDs are already rejected by the -EINVAL
as returned by _kvm_get_cpucfg().
Fixes: db1ecca22e ("LoongArch: KVM: Add LSX (128bit SIMD) support")
Fixes: 118e10cd89 ("LoongArch: KVM: Add LASX (256bit SIMD) support")
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The unflatten_and_copy_device_tree() function contains a call to
memblock_alloc(). This means that memblock is allocating memory before
any of the reserved memory regions are set aside in the arch_mem_init()
function which calls early_init_fdt_scan_reserved_mem(). Therefore,
there is a possibility for memblock to allocate from any of the
reserved memory regions.
Hence, move the call to early_init_fdt_scan_reserved_mem() to be earlier
in the init sequence, so that the reserved memory regions are set aside
before any allocations are done using memblock.
Cc: stable@vger.kernel.org
Fixes: 88d4d957ed ("LoongArch: Add FDT booting support from efi system table")
Signed-off-by: Oreoluwa Babatunde <quic_obabatun@quicinc.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The PAPR spec spells the function name as
"ibm,reset-pe-dma-windows"
but in practice firmware uses the singular form:
"ibm,reset-pe-dma-window"
in the device tree. Since we have the wrong spelling in the RTAS
function table, reverse lookups (token -> name) fail and warn:
unexpected failed lookup for token 86
WARNING: CPU: 1 PID: 545 at arch/powerpc/kernel/rtas.c:659 __do_enter_rtas_trace+0x2a4/0x2b4
CPU: 1 PID: 545 Comm: systemd-udevd Not tainted 6.8.0-rc4 #30
Hardware name: IBM,9105-22A POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NL1060_028) hv:phyp pSeries
NIP [c0000000000417f0] __do_enter_rtas_trace+0x2a4/0x2b4
LR [c0000000000417ec] __do_enter_rtas_trace+0x2a0/0x2b4
Call Trace:
__do_enter_rtas_trace+0x2a0/0x2b4 (unreliable)
rtas_call+0x1f8/0x3e0
enable_ddw.constprop.0+0x4d0/0xc84
dma_iommu_dma_supported+0xe8/0x24c
dma_set_mask+0x5c/0xd8
mlx5_pci_init.constprop.0+0xf0/0x46c [mlx5_core]
probe_one+0xfc/0x32c [mlx5_core]
local_pci_probe+0x68/0x12c
pci_call_probe+0x68/0x1ec
pci_device_probe+0xbc/0x1a8
really_probe+0x104/0x570
__driver_probe_device+0xb8/0x224
driver_probe_device+0x54/0x130
__driver_attach+0x158/0x2b0
bus_for_each_dev+0xa8/0x120
driver_attach+0x34/0x48
bus_add_driver+0x174/0x304
driver_register+0x8c/0x1c4
__pci_register_driver+0x68/0x7c
mlx5_init+0xb8/0x118 [mlx5_core]
do_one_initcall+0x60/0x388
do_init_module+0x7c/0x2a4
init_module_from_file+0xb4/0x108
idempotent_init_module+0x184/0x34c
sys_finit_module+0x90/0x114
And oopses are possible when lockdep is enabled or the RTAS
tracepoints are active, since those paths dereference the result of
the lookup.
Use the correct spelling to match firmware's behavior, adjusting the
related constants to match.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 8252b88294 ("powerpc/rtas: improve function information lookups")
Reported-by: Gaurav Batra <gbatra@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240222-rtas-fix-ibm-reset-pe-dma-window-v1-1-7aaf235ac63c@linux.ibm.com
When kdump kernel tries to copy dump data over SR-IOV, LPAR panics due
to NULL pointer exception:
Kernel attempted to read user page (0) - exploit attempt? (uid: 0)
BUG: Kernel NULL pointer dereference on read at 0x00000000
Faulting instruction address: 0xc000000020847ad4
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
Modules linked in: mlx5_core(+) vmx_crypto pseries_wdt papr_scm libnvdimm mlxfw tls psample sunrpc fuse overlay squashfs loop
CPU: 12 PID: 315 Comm: systemd-udevd Not tainted 6.4.0-Test102+ #12
Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_008) hv:phyp pSeries
NIP: c000000020847ad4 LR: c00000002083b2dc CTR: 00000000006cd18c
REGS: c000000029162ca0 TRAP: 0300 Not tainted (6.4.0-Test102+)
MSR: 800000000280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE> CR: 48288244 XER: 00000008
CFAR: c00000002083b2d8 DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 1
...
NIP _find_next_zero_bit+0x24/0x110
LR bitmap_find_next_zero_area_off+0x5c/0xe0
Call Trace:
dev_printk_emit+0x38/0x48 (unreliable)
iommu_area_alloc+0xc4/0x180
iommu_range_alloc+0x1e8/0x580
iommu_alloc+0x60/0x130
iommu_alloc_coherent+0x158/0x2b0
dma_iommu_alloc_coherent+0x3c/0x50
dma_alloc_attrs+0x170/0x1f0
mlx5_cmd_init+0xc0/0x760 [mlx5_core]
mlx5_function_setup+0xf0/0x510 [mlx5_core]
mlx5_init_one+0x84/0x210 [mlx5_core]
probe_one+0x118/0x2c0 [mlx5_core]
local_pci_probe+0x68/0x110
pci_call_probe+0x68/0x200
pci_device_probe+0xbc/0x1a0
really_probe+0x104/0x540
__driver_probe_device+0xb4/0x230
driver_probe_device+0x54/0x130
__driver_attach+0x158/0x2b0
bus_for_each_dev+0xa8/0x130
driver_attach+0x34/0x50
bus_add_driver+0x16c/0x300
driver_register+0xa4/0x1b0
__pci_register_driver+0x68/0x80
mlx5_init+0xb8/0x100 [mlx5_core]
do_one_initcall+0x60/0x300
do_init_module+0x7c/0x2b0
At the time of LPAR dump, before kexec hands over control to kdump
kernel, DDWs (Dynamic DMA Windows) are scanned and added to the FDT.
For the SR-IOV case, default DMA window "ibm,dma-window" is removed from
the FDT and DDW added, for the device.
Now, kexec hands over control to the kdump kernel.
When the kdump kernel initializes, PCI busses are scanned and IOMMU
group/tables created, in pci_dma_bus_setup_pSeriesLP(). For the SR-IOV
case, there is no "ibm,dma-window". The original commit: b1fc44eaa9,
fixes the path where memory is pre-mapped (direct mapped) to the DDW.
When TCEs are direct mapped, there is no need to initialize IOMMU
tables.
iommu_table_setparms_lpar() only considers "ibm,dma-window" property
when initiallizing IOMMU table. In the scenario where TCEs are
dynamically allocated for SR-IOV, newly created IOMMU table is not
initialized. Later, when the device driver tries to enter TCEs for the
SR-IOV device, NULL pointer execption is thrown from iommu_area_alloc().
The fix is to initialize the IOMMU table with DDW property stored in the
FDT. There are 2 points to remember:
1. For the dedicated adapter, kdump kernel would encounter both
default and DDW in FDT. In this case, DDW property is used to
initialize the IOMMU table.
2. A DDW could be direct or dynamic mapped. kdump kernel would
initialize IOMMU table and mark the existing DDW as
"dynamic". This works fine since, at the time of table
initialization, iommu_table_clear() makes some space in the
DDW, for some predefined number of TCEs which are needed for
kdump to succeed.
Fixes: b1fc44eaa9 ("pseries/iommu/ddw: Fix kdump to work in absence of ibm,dma-window")
Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240125203017.61014-1-gbatra@linux.ibm.com
Currently, mctp_local_output only takes ownership of skb on success, and
we may leak an skb if mctp_local_output fails in specific states; the
skb ownership isn't transferred until the actual output routing occurs.
Instead, make mctp_local_output free the skb on all error paths up to
the route action, so it always consumes the passed skb.
Fixes: 833ef3b91d ("mctp: Populate socket implementation")
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220081053.1439104-1-jk@codeconstruct.com.au
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-02-20 (ice)
This series contains updates to ice driver only.
Yochai sets parent device to properly reflect connection state between
source DPLL and output pin.
Arkadiusz fixes additional issues related to DPLL; proper reporting of
phase_adjust value and preventing use/access of data while resetting.
Amritha resolves ASSERT_RTNL() being triggered on certain reset/rebuild
flows.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix ASSERT_RTNL() warning during certain scenarios
ice: fix pin phase adjust updates on PF reset
ice: fix dpll periodic work data updates on PF reset
ice: fix dpll and dpll_pin data access on PF reset
ice: fix dpll input pin phase_adjust value updates
ice: fix connection state of DPLL and out pin
====================
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240220214444.1039759-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzkaller triggered following kasan splat:
BUG: KASAN: use-after-free in __skb_flow_dissect+0x19d1/0x7a50 net/core/flow_dissector.c:1170
Read of size 1 at addr ffff88812fb4000e by task syz-executor183/5191
[..]
kasan_report+0xda/0x110 mm/kasan/report.c:588
__skb_flow_dissect+0x19d1/0x7a50 net/core/flow_dissector.c:1170
skb_flow_dissect_flow_keys include/linux/skbuff.h:1514 [inline]
___skb_get_hash net/core/flow_dissector.c:1791 [inline]
__skb_get_hash+0xc7/0x540 net/core/flow_dissector.c:1856
skb_get_hash include/linux/skbuff.h:1556 [inline]
ip_tunnel_xmit+0x1855/0x33c0 net/ipv4/ip_tunnel.c:748
ipip_tunnel_xmit+0x3cc/0x4e0 net/ipv4/ipip.c:308
__netdev_start_xmit include/linux/netdevice.h:4940 [inline]
netdev_start_xmit include/linux/netdevice.h:4954 [inline]
xmit_one net/core/dev.c:3548 [inline]
dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3564
__dev_queue_xmit+0x7c1/0x3d60 net/core/dev.c:4349
dev_queue_xmit include/linux/netdevice.h:3134 [inline]
neigh_connected_output+0x42c/0x5d0 net/core/neighbour.c:1592
...
ip_finish_output2+0x833/0x2550 net/ipv4/ip_output.c:235
ip_finish_output+0x31/0x310 net/ipv4/ip_output.c:323
..
iptunnel_xmit+0x5b4/0x9b0 net/ipv4/ip_tunnel_core.c:82
ip_tunnel_xmit+0x1dbc/0x33c0 net/ipv4/ip_tunnel.c:831
ipgre_xmit+0x4a1/0x980 net/ipv4/ip_gre.c:665
__netdev_start_xmit include/linux/netdevice.h:4940 [inline]
netdev_start_xmit include/linux/netdevice.h:4954 [inline]
xmit_one net/core/dev.c:3548 [inline]
dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3564
...
The splat occurs because skb->data points past skb->head allocated area.
This is because neigh layer does:
__skb_pull(skb, skb_network_offset(skb));
... but skb_network_offset() returns a negative offset and __skb_pull()
arg is unsigned. IOW, we skb->data gets "adjusted" by a huge value.
The negative value is returned because skb->head and skb->data distance is
more than 64k and skb->network_header (u16) has wrapped around.
The bug is in the ip_tunnel infrastructure, which can cause
dev->needed_headroom to increment ad infinitum.
The syzkaller reproducer consists of packets getting routed via a gre
tunnel, and route of gre encapsulated packets pointing at another (ipip)
tunnel. The ipip encapsulation finds gre0 as next output device.
This results in the following pattern:
1). First packet is to be sent out via gre0.
Route lookup found an output device, ipip0.
2).
ip_tunnel_xmit for gre0 bumps gre0->needed_headroom based on the future
output device, rt.dev->needed_headroom (ipip0).
3).
ip output / start_xmit moves skb on to ipip0. which runs the same
code path again (xmit recursion).
4).
Routing step for the post-gre0-encap packet finds gre0 as output device
to use for ipip0 encapsulated packet.
tunl0->needed_headroom is then incremented based on the (already bumped)
gre0 device headroom.
This repeats for every future packet:
gre0->needed_headroom gets inflated because previous packets' ipip0 step
incremented rt->dev (gre0) headroom, and ipip0 incremented because gre0
needed_headroom was increased.
For each subsequent packet, gre/ipip0->needed_headroom grows until
post-expand-head reallocations result in a skb->head/data distance of
more than 64k.
Once that happens, skb->network_header (u16) wraps around when
pskb_expand_head tries to make sure that skb_network_offset() is unchanged
after the headroom expansion/reallocation.
After this skb_network_offset(skb) returns a different (and negative)
result post headroom expansion.
The next trip to neigh layer (or anything else that would __skb_pull the
network header) makes skb->data point to a memory location outside
skb->head area.
v2: Cap the needed_headroom update to an arbitarily chosen upperlimit to
prevent perpetual increase instead of dropping the headroom increment
completely.
Reported-and-tested-by: syzbot+bfde3bef047a81b8fde6@syzkaller.appspotmail.com
Closes: https://groups.google.com/g/syzkaller-bugs/c/fL9G6GtWskY/m/VKk_PR5FBAAJ
Fixes: 243aad830e ("ip_gre: include route header_len in max_headroom calculation")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220135606.4939-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
BUG: KMSAN: uninit-value in nla_validate_range_unsigned lib/nlattr.c:222 [inline]
BUG: KMSAN: uninit-value in nla_validate_int_range lib/nlattr.c:336 [inline]
BUG: KMSAN: uninit-value in validate_nla lib/nlattr.c:575 [inline]
BUG: KMSAN: uninit-value in __nla_validate_parse+0x2e20/0x45c0 lib/nlattr.c:631
nla_validate_range_unsigned lib/nlattr.c:222 [inline]
nla_validate_int_range lib/nlattr.c:336 [inline]
validate_nla lib/nlattr.c:575 [inline]
...
The message in question matches this policy:
[NFTA_TARGET_REV] = NLA_POLICY_MAX(NLA_BE32, 255),
but because NLA_BE32 size in minlen array is 0, the validation
code will read past the malformed (too small) attribute.
Note: Other attributes, e.g. BITFIELD32, SINT, UINT.. are also missing:
those likely should be added too.
Reported-by: syzbot+3f497b07aa3baf2fb4d0@syzkaller.appspotmail.com
Reported-by: xingwei lee <xrivendell7@gmail.com>
Closes: https://lore.kernel.org/all/CABOYnLzFYHSnvTyS6zGa-udNX55+izqkOt2sB9WDqUcEGW6n8w@mail.gmail.com/raw
Fixes: ecaf75ffd5 ("netlink: introduce bigendian integer types")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240221172740.5092-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit bfac19e239 ("fbdev: mx3fb: Remove the driver") backlight
is no longer functional.
The fbdev mx3fb driver used to automatically select
CONFIG_BACKLIGHT_CLASS_DEVICE.
Now that the mx3fb driver has been removed, enable the
CONFIG_BACKLIGHT_CLASS_DEVICE option so that backlight can still work
by default.
Tested on a imx6dl-sabresd board.
Cc: stable@vger.kernel.org
Fixes: bfac19e239 ("fbdev: mx3fb: Remove the driver")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Tested-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Colibri iMX7
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Extend set_memory_region_test's invalid flags subtest to verify that
GUEST_MEMFD is incompatible with READONLY. GUEST_MEMFD doesn't currently
support writes from userspace and KVM doesn't support emulated MMIO on
private accesses, and so KVM is supposed to reject the GUEST_MEMFD+READONLY
in order to avoid configuration that KVM can't support.
Link: https://lore.kernel.org/r/20240222190612.2942589-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Actually create a GUEST_MEMFD instance and pass it to KVM when doing
negative tests for KVM_SET_USER_MEMORY_REGION2 + KVM_MEM_GUEST_MEMFD.
Without a valid GUEST_MEMFD file descriptor, KVM_SET_USER_MEMORY_REGION2
will always fail with -EINVAL, resulting in false passes for any and all
tests of illegal combinations of KVM_MEM_GUEST_MEMFD and other flags.
Fixes: 5d74316466 ("KVM: selftests: Add a memory region subtest to validate invalid flags")
Link: https://lore.kernel.org/r/20240222190612.2942589-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Advertise and support software-protected VMs if and only if the TDP MMU is
enabled, i.e. disallow KVM_SW_PROTECTED_VM if TDP is enabled for KVM's
legacy/shadow MMU. TDP support for the shadow MMU is maintenance-only,
e.g. support for TDX and SNP will also be restricted to the TDP MMU.
Fixes: 89ea60c2c7 ("KVM: x86: Add support for "protected VMs" that can utilize private memory")
Link: https://lore.kernel.org/r/20240222190612.2942589-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rewrite the help message for KVM_SW_PROTECTED_VM to make it clear that
software-protected VMs are a development and testing vehicle for
guest_memfd(), and that attempting to use KVM_SW_PROTECTED_VM for anything
remotely resembling a "real" VM will fail. E.g. any memory accesses from
KVM will incorrectly access shared memory, nested TDP is wildly broken,
and so on and so forth.
Update KVM's API documentation with similar warnings to discourage anyone
from attempting to run anything but selftests with KVM_X86_SW_PROTECTED_VM.
Fixes: 89ea60c2c7 ("KVM: x86: Add support for "protected VMs" that can utilize private memory")
Link: https://lore.kernel.org/r/20240222190612.2942589-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Disallow creating read-only memslots that support GUEST_MEMFD, as
GUEST_MEMFD is fundamentally incompatible with KVM's semantics for
read-only memslots. Read-only memslots allow the userspace VMM to emulate
option ROMs by filling the backing memory with readable, executable code
and data, while triggering emulated MMIO on writes. GUEST_MEMFD doesn't
currently support writes from userspace and KVM doesn't support emulated
MMIO on private accesses, i.e. the guest can only ever read zeros, and
writes will always be treated as errors.
Cc: Fuad Tabba <tabba@google.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Isaku Yamahata <isaku.yamahata@gmail.com>
Cc: Yu Zhang <yu.c.zhang@linux.intel.com>
Cc: Chao Peng <chao.p.peng@linux.intel.com>
Fixes: a7800aa80e ("KVM: Add KVM_CREATE_GUEST_MEMFD ioctl() for guest-specific backing memory")
Link: https://lore.kernel.org/r/20240222190612.2942589-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
This reports the currently used vram allocations.
userspace using this has been proposed for nvk, but
it's a rather trivial uapi addition.
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This returns the BAR resources size so userspace can make
decisions based on rebar support.
userspace using this has been proposed for nvk, but
it's a rather trivial uapi addition.
Reviewed-by: Faith Ekstrand <faith.ekstrand@collabora.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The new riscv specific arch_hugetlb_migration_supported() must be
guarded with a #ifdef CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION to avoid
the following build error:
In file included from include/linux/hugetlb.h:851,
from kernel/fork.c:52:
>> arch/riscv/include/asm/hugetlb.h:15:42: error: static declaration of 'arch_hugetlb_migration_supported' follows non-static declaration
15 | #define arch_hugetlb_migration_supported arch_hugetlb_migration_supported
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/hugetlb.h:916:20: note: in expansion of macro 'arch_hugetlb_migration_supported'
916 | static inline bool arch_hugetlb_migration_supported(struct hstate *h)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/riscv/include/asm/hugetlb.h:14:6: note: previous declaration of 'arch_hugetlb_migration_supported' with type 'bool(struct hstate *)' {aka '_Bool(struct hstate *)'}
14 | bool arch_hugetlb_migration_supported(struct hstate *h);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402110258.CV51JlEI-lkp@intel.com/
Fixes: ce68c03545 ("riscv: Fix arch_hugetlb_migration_supported() for NAPOT")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240211083640.756583-1-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
CALLER_ADDRx returns caller's address at specified level, they are used
for several tracers. These macros eventually use
__builtin_return_address(n) to get the caller's address if arch doesn't
define their own implementation.
In RISC-V, __builtin_return_address(n) only works when n == 0, we need
to walk the stack frame to get the caller's address at specified level.
data.level started from 'level + 3' due to the call flow of getting
caller's address in RISC-V implementation. If we don't have additional
three iteration, the level is corresponding to follows:
callsite -> return_address -> arch_stack_walk -> walk_stackframe
| | | |
level 3 level 2 level 1 level 0
Fixes: 10626c32e3 ("riscv/ftrace: Add basic support")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Zong Li <zong.li@sifive.com>
Link: https://lore.kernel.org/r/20240202015102.26251-1-zong.li@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This single fix is also part of a larger cleanup, so I'm merging it
into my fixes branch so it can be shared with for-next.
* commit '8246601a7d391ce8207408149d65732f28af81a1':
riscv: tlb: fix __p*d_free_tlb()
Pull block fixes from Jens Axboe:
"Mostly just fixlets for md, but also a sed-opal parsing fix"
* tag 'block-6.8-2024-02-22' of git://git.kernel.dk/linux:
block: sed-opal: handle empty atoms when parsing response
md: Don't suspend the array for interrupted reshape
md: Don't register sync_thread for reshape directly
md: Make sure md_do_sync() will set MD_RECOVERY_DONE
md: Don't ignore read-only array in md_check_recovery()
md: Don't ignore suspended array in md_check_recovery()
md: Fix missing release of 'active_io' for flush
Pull iommufd fixes from Jason Gunthorpe:
- Fix dirty tracking bitmap collection when using reporting bitmaps
that are not neatly aligned to u64's or match the IO page table radix
tree layout.
- Add self tests to cover the cases that were found to be broken.
- Add missing enforcement of invalidation type in the uapi.
- Fix selftest config generation
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
selftests/iommu: fix the config fragment
iommufd: Reject non-zero data_type if no data_len is provided
iommufd/iova_bitmap: Consider page offset for the pages to be pinned
iommufd/selftest: Add mock IO hugepages tests
iommufd/selftest: Hugepage mock domain support
iommufd/selftest: Refactor mock_domain_read_and_clear_dirty()
iommufd/selftest: Refactor dirty bitmap tests
iommufd/iova_bitmap: Handle recording beyond the mapped pages
iommufd/selftest: Test u64 unaligned bitmaps
iommufd/iova_bitmap: Switch iova_bitmap::bitmap to an u8 array
iommufd/iova_bitmap: Bounds check mapped::pages access
Pull x86 platform driver fixes from Hans de Goede:
"Regression fixes:
- Fix INT0002 vGPIO events no longer working after 6.8 ACPI SCI
changes
- AMD-PMF: Fix laptops (e.g. Framework 13 AMD) hanging on suspend
- x86-android-tablets: Fix touchscreen no longer working on Lenovo
Yogabook
- x86-android-tablets: Fix serdev instantiation regression
- intel-vbtn: Fix ThinkPad X1 Tablet Gen2 no longer suspending
Bug fixes:
- think-lmi: Fix changing BIOS settings on Lenovo workstations
- touchscreen_dmi: Fix Hi8 Air touchscreen data sometimes missing
- AMD-PMF: Fix Smart PC support not working after suspend/resume
Other misc small fixes"
* tag 'platform-drivers-x86-v6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Only update profile if successfully converted
platform/x86: intel-vbtn: Stop calling "VBDL" from notify_handler
platform/x86: x86-android-tablets: Fix acer_b1_750_goodix_gpios name
platform/x86: x86-android-tablets: Fix serdev instantiation no longer working
platform/x86: Add new get_serdev_controller() helper
platform/x86: x86-android-tablets: Fix keyboard touchscreen on Lenovo Yogabook1 X90
platform/x86/amd/pmf: Fix a potential race with policy binary sideload
platform/x86/amd/pmf: Fixup error handling for amd_pmf_init_smart_pc()
platform/x86/amd/pmf: Add debugging message for missing policy data
platform/x86/amd/pmf: Fix a suspend hang on Framework 13
platform/x86/amd/pmf: Fix TEE enact command failure after suspend and resume
platform/x86/amd/pmf: Remove smart_pc_status enum
platform/x86: touchscreen_dmi: Consolidate Goodix upside-down touchscreen data
platform/x86: touchscreen_dmi: Allow partial (prefix) matches for ACPI names
platform/x86: intel: int0002_vgpio: Pass IRQF_ONESHOT to request_irq()
platform/x86: think-lmi: Fix password opcode ordering for workstations
Pull clk fixes from Stephen Boyd:
"Here are some Samsung clk driver fixes I've been sitting on for far
too long.
They fix the bindings and clk driver for the Google GS101 SoC"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: samsung: clk-gs101: comply with the new dt cmu_misc clock names
dt-bindings: clock: gs101: rename cmu_misc clock-names
Pull vfs fixes from Christian Brauner:
- Fix a memory leak in cachefiles
- Restrict aio cancellations to I/O submitted through the aio
interfaces as this is otherwise causing issues for I/O submitted
via io_uring
- Increase buffer for afs volume status to avoid overflow
- Fix a missing zero-length check in unbuffered writes in the
netfs library. If generic_write_checks() returns zero make
netfs_unbuffered_write_iter() return right away
- Prevent a leak in i_dio_count caused by netfs_begin_read() operating
past i_size. It will return early and leave i_dio_count incremented
- Account for ipv4 addresses as well as ipv6 addresses when processing
incoming callbacks in afs
* tag 'vfs-6.8-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio
afs: Increase buffer size in afs_update_volume_status()
afs: Fix ignored callbacks over ipv4
cachefiles: fix memory leak in cachefiles_add_cache()
netfs: Fix missing zero-length check in unbuffered write
netfs: Fix i_dio_count leak on DIO read past i_size
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf and netfilter.
Current release - regressions:
- af_unix: fix another unix GC hangup
Previous releases - regressions:
- core: fix a possible AF_UNIX deadlock
- bpf: fix NULL pointer dereference in sk_psock_verdict_data_ready()
- netfilter: nft_flow_offload: release dst in case direct xmit path
is used
- bridge: switchdev: ensure MDB events are delivered exactly once
- l2tp: pass correct message length to ip6_append_data
- dccp/tcp: unhash sk from ehash for tb2 alloc failure after
check_estalblished()
- tls: fixes for record type handling with PEEK
- devlink: fix possible use-after-free and memory leaks in
devlink_init()
Previous releases - always broken:
- bpf: fix an oops when attempting to read the vsyscall page through
bpf_probe_read_kernel
- sched: act_mirred: use the backlog for mirred ingress
- netfilter: nft_flow_offload: fix dst refcount underflow
- ipv6: sr: fix possible use-after-free and null-ptr-deref
- mptcp: fix several data races
- phonet: take correct lock to peek at the RX queue
Misc:
- handful of fixes and reliability improvements for selftests"
* tag 'net-6.8.0-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
l2tp: pass correct message length to ip6_append_data
net: phy: realtek: Fix rtl8211f_config_init() for RTL8211F(D)(I)-VD-CG PHY
selftests: ioam: refactoring to align with the fix
Fix write to cloned skb in ipv6_hop_ioam()
phonet/pep: fix racy skb_queue_empty() use
phonet: take correct lock to peek at the RX queue
net: sparx5: Add spinlock for frame transmission from CPU
net/sched: flower: Add lock protection when remove filter handle
devlink: fix port dump cmd type
net: stmmac: Fix EST offset for dwmac 5.10
tools: ynl: don't leak mcast_groups on init error
tools: ynl: make sure we always pass yarg to mnl_cb_run
net: mctp: put sock on tag allocation failure
netfilter: nf_tables: use kzalloc for hook allocation
netfilter: nf_tables: register hooks last when adding new chain/flowtable
netfilter: nft_flow_offload: release dst in case direct xmit path is used
netfilter: nft_flow_offload: reset dst in route object after setting up flow
netfilter: nf_tables: set dormant flag on hook register failure
selftests: tls: add test for peeking past a record of a different type
selftests: tls: add test for merging of same-type control messages
...
On Tegra186, secure world applications may need to access host1x
during suspend/resume, and rely on the kernel to keep Host1x out
of reset during the suspend cycle. As such, as a quirk,
skip asserting Host1x's reset on Tegra186.
We don't need to keep the clocks enabled, as BPMP ensures the clock
stays on while Host1x is being used. On newer SoC's, the reset line
is inaccessible, so there is no need for the quirk.
Fixes: b7c00cdf6d ("gpu: host1x: Enable system suspend callbacks")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222010517.1573931-1-cyndis@kapsi.fi
[Why]
Currently there is an error while translating input clock sates into
output clock states. The highest fclk setting from output sates is
being dropped because of this error.
[How]
For dcn35 and dcn351, make output_states equal to input states.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Swapnil Patel <swapnil.patel@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes potential null pointer dereference warnings in the
dc_dmub_srv_cmd_list_queue_execute() and dc_dmub_srv_is_hw_pwr_up()
functions.
In both functions, the 'dc_dmub_srv' variable was being dereferenced
before it was checked for null. This could lead to a null pointer
dereference if 'dc_dmub_srv' is null. The fix is to check if
'dc_dmub_srv' is null before dereferencing it.
Thus moving the null checks for 'dc_dmub_srv' to the beginning of the
functions to ensure that 'dc_dmub_srv' is not null when it is
dereferenced.
Found by smatch & thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:133 dc_dmub_srv_cmd_list_queue_execute() warn: variable dereferenced before check 'dc_dmub_srv' (see line 128)
drivers/gpu/drm/amd/amdgpu/../display/dc/dc_dmub_srv.c:1167 dc_dmub_srv_is_hw_pwr_up() warn: variable dereferenced before check 'dc_dmub_srv' (see line 1164)
Fixes: 028bac5834 ("drm/amd/display: decouple dmcub execution to reduce lock granularity")
Fixes: 65138eb72e ("drm/amd/display: Add DCN35 DMUB")
Cc: JinZe.Xu <jinze.xu@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Josip Pavic <josip.pavic@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull tracing fix from Steven Rostedt:
- While working on the ring buffer I noticed that the counter used for
knowing where the end of the data is on a sub-buffer was not a full
"int" but just 20 bits. It was masked out to 0xfffff.
With the new code that allows the user to change the size of the
sub-buffer, it is theoretically possible to ask for a size bigger
than 2^20. If that happens, unexpected results may occur as there's
no code checking if the counter overflowed the 20 bits of the write
mask. There are other checks to make sure events fit in the
sub-buffer, but if the sub-buffer itself is too big, that is not
checked.
Add a check in the resize of the sub-buffer to make sure that it
never goes beyond the size of the counter that holds how much data is
on it.
* tag 'trace-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Do not let subbuf be bigger than write mask
[Why]
Observe error message "Can't retrieve aconnector in hpd_rx_irq_offload_work"
when boot up with a mst tbt4 dock connected. After analyzing, there are few
parts needed to be adjusted:
1. hpd_rx_offload_wq[].aconnector is not initialzed before the dmub outbox
hpd_irq handler get registered which causes the error message.
2. registeration of hpd and hpd_rx_irq event for usb4 dp tunneling is not
aligned with legacy interface sequence
[How]
Put DMUB_NOTIFICATION_HPD and DMUB_NOTIFICATION_HPD_IRQ handler
registration into register_hpd_handlers() to align other interfaces and
get hpd_rx_offload_wq[].aconnector initialized earlier than that.
Leave DMUB_NOTIFICATION_AUX_REPLY registered as it was since we need that
while calling dc_link_detect(). USB4 connection status will be proactively
detected by dc_link_detect_connection_type() in amdgpu_dm_initialize_drm_device()
Cc: Stable <stable@vger.kernel.org>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The MGBE power-domains on Tegra234 are mapped to the MGBE controllers as
follows:
MGBE0 (0x68000000) --> Power-Domain MGBEB
MGBE1 (0x69000000) --> Power-Domain MGBEC
MGBE2 (0x6a000000) --> Power-Domain MGBED
Update the device-tree nodes for Tegra234 to correct this.
Fixes: 610cdf3186 ("arm64: tegra: Add MGBE nodes on Tegra234")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The s390 common I/O layer (CIO) returns an unexpected -EBUSY return code
when drivers try to start I/O while a path-verification (PV) process is
pending. This can lead to failed device initialization attempts with
symptoms like broken network connectivity after boot.
Fix this by replacing the -EBUSY return code with a deferred condition
code 1 reply to make path-verification handling consistent from a
driver's point of view.
The problem can be reproduced semi-regularly using the following process,
while repeating steps 2-3 as necessary (example assumes an OSA device
with bus-IDs 0.0.a000-0.0.a002 on CHPID 0.02):
1. echo 0.0.a000,0.0.a001,0.0.a002 >/sys/bus/ccwgroup/drivers/qeth/group
2. echo 0 > /sys/bus/ccwgroup/devices/0.0.a000/online
3. echo 1 > /sys/bus/ccwgroup/devices/0.0.a000/online ; \
echo on > /sys/devices/css0/chp0.02/status
Background information:
The common I/O layer starts path-verification I/Os when it receives
indications about changes in a device path's availability. This occurs
for example when hardware events indicate a change in channel-path
status, or when a manual operation such as a CHPID vary or configure
operation is performed.
If a driver attempts to start I/O while a PV is running, CIO reports a
successful I/O start (ccw_device_start() return code 0). Then, after
completion of PV, CIO synthesizes an interrupt response that indicates
an asynchronous status condition that prevented the start of the I/O
(deferred condition code 1).
If a PV indication arrives while a device is busy with driver-owned I/O,
PV is delayed until after I/O completion was reported to the driver's
interrupt handler. To ensure that PV can be started eventually, CIO
reports a device busy condition (ccw_device_start() return code -EBUSY)
if a driver tries to start another I/O while PV is pending.
In some cases this -EBUSY return code causes device drivers to consider
a device not operational, resulting in failed device initialization.
Note: The code that introduced the problem was added in 2003. Symptoms
started appearing with the following CIO commit that causes a PV
indication when a device is removed from the cio_ignore list after the
associated parent subchannel device was probed, but before online
processing of the CCW device has started:
2297791c92 ("s390/cio: dont unregister subchannel from child-drivers")
During boot, the cio_ignore list is modified by the cio_ignore dracut
module [1] as well as Linux vendor-specific systemd service scripts[2].
When combined, this commit and boot scripts cause a frequent occurrence
of the problem during boot.
[1] https://github.com/dracutdevs/dracut/tree/master/modules.d/81cio_ignore
[2] https://github.com/SUSE/s390-tools/blob/master/cio_ignore.service
Cc: stable@vger.kernel.org # v5.15+
Fixes: 2297791c92 ("s390/cio: dont unregister subchannel from child-drivers")
Tested-By: Thorsten Winkler <twinkler@linux.ibm.com>
Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The config fragment doesn't follow the correct format to enable those
config options which make the config options getting missed while
merging with other configs.
➜ merge_config.sh -m .config tools/testing/selftests/iommu/config
Using .config as base
Merging tools/testing/selftests/iommu/config
➜ make olddefconfig
.config:5295:warning: unexpected data: CONFIG_IOMMUFD
.config:5296:warning: unexpected data: CONFIG_IOMMUFD_TEST
While at it, add CONFIG_FAULT_INJECTION as well which is needed for
CONFIG_IOMMUFD_TEST. If CONFIG_FAULT_INJECTION isn't present in base
config (such as x86 defconfig), CONFIG_IOMMUFD_TEST doesn't get enabled.
Fixes: 57f0988706 ("iommufd: Add a selftest")
Link: https://lore.kernel.org/r/20240222074934.71380-1-usama.anjum@collabora.com
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
During syncobj_eventfd_entry_func, dma_fence_chain_find_seqno may set
the fence to NULL if the given seqno is signaled and a later seqno has
already been submitted. In that case, the eventfd should be signaled
immediately which currently does not happen.
This is a similar issue to the one addressed by commit b19926d4f3
("drm/syncobj: Deal with signalled fences in drm_syncobj_find_fence.").
As a fix, if the return value of dma_fence_chain_find_seqno indicates
success but it sets the fence to NULL, we will assign a stub fence to
ensure the following code still signals the eventfd.
v1 -> v2: assign a stub fence instead of signaling the eventfd
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
Fixes: c7a4722971 ("drm/syncobj: add IOCTL to register an eventfd")
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20240221184527.37667-1-ekurzinger@nvidia.com
If the SMMU is configured to use a two level CD table then
arm_smmu_write_ctx_desc() allocates a CD table leaf internally using
GFP_KERNEL. Due to recent changes this is being done under a spinlock to
iterate over the device list - thus it will trigger a sleeping while
atomic warning:
arm_smmu_sva_set_dev_pasid()
mutex_lock(&sva_lock);
__arm_smmu_sva_bind()
arm_smmu_mmu_notifier_get()
spin_lock_irqsave()
arm_smmu_write_ctx_desc()
arm_smmu_get_cd_ptr()
arm_smmu_alloc_cd_leaf_table()
dmam_alloc_coherent(GFP_KERNEL)
This is a 64K high order allocation and really should not be done
atomically.
At the moment the rework of the SVA to follow the new API is half
finished. Recently the CD table memory was moved from the domain to the
master, however we have the confusing situation where the SVA code is
wrongly using the RID domains device's list to track which CD tables the
SVA is installed in.
Remove the logic to replicate the CD across all the domain's masters
during attach. We know which master and which CD table the PASID should be
installed in.
Right now SVA only works when dma-iommu.c is in control of the RID
translation, which means we have a single iommu_domain shared across the
entire group and that iommu_domain is not shared outside the group.
Critically this means that the iommu_group->devices list and RID's
smmu_domain->devices list describe the same set of masters.
For PCI cases the core code also insists on singleton groups so there is
only one entry in the smmu_domain->devices list that is equal to the
master being passed in to arm_smmu_sva_set_dev_pasid().
Only non-PCI cases may have multi-device groups. However, the core code
will repeat the calls to arm_smmu_sva_set_dev_pasid() across the entire
iommu_group->devices list.
Instead of having arm_smmu_mmu_notifier_get() indirectly loop over all the
devices in the group via the RID's smmu_domain, rely on
__arm_smmu_sva_bind() to be called for each device in the group and
install the repeated CD entry that way.
This avoids taking the spinlock to access the devices list and permits the
arm_smmu_write_ctx_desc() to use a sleeping allocation. Leave the
arm_smmu_mm_release() as a confusing situation, this requires tracking
attached masters inside the SVA domain.
Removing the loop allows arm_smmu_write_ctx_desc() to be called outside
the spinlock and thus is safe to use GFP_KERNEL.
Move the clearing of the CD into arm_smmu_sva_remove_dev_pasid() so that
arm_smmu_mmu_notifier_get/put() remain paired functions.
Fixes: 24503148c5 ("iommu/arm-smmu-v3: Refactor write_ctx_desc")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/4e25d161-0cf8-4050-9aa3-dfa21cd63e56@moroto.mountain/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Michael Shavit <mshavit@google.com>
Link: https://lore.kernel.org/r/0-v3-11978fc67151+112-smmu_cd_atomic_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
Each SPI controller is expected to call the spi_controller_suspend() and
spi_controller_resume() callbacks at system-wide suspend and resume.
It (1) handles the kthread worker for queued controllers and (2) marks
the controller as suspended to have spi_sync() fail while the
controller is unavailable.
Those two operations do not require the controller to be active, we do
not need to increment the runtime PM usage counter.
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://msgid.link/r/20240222-cdns-qspi-pm-fix-v4-4-6b6af8bcbf59@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ->runtime_suspend() and ->runtime_resume() callbacks are not
expected to call spi_controller_suspend() and spi_controller_resume().
Remove calls to those in the cadence-qspi driver.
Those helpers have two roles currently:
- They stop/start the queue, including dealing with the kworker.
- They toggle the SPI controller SPI_CONTROLLER_SUSPENDED flag. It
requires acquiring ctlr->bus_lock_mutex.
Step one is irrelevant because cadence-qspi is not queued. Step two
however has two implications:
- A deadlock occurs, because ->runtime_resume() is called in a context
where the lock is already taken (in the ->exec_op() callback, where
the usage count is incremented).
- It would disallow all operations once the device is auto-suspended.
Here is a brief call tree highlighting the mutex deadlock:
spi_mem_exec_op()
...
spi_mem_access_start()
mutex_lock(&ctlr->bus_lock_mutex)
cqspi_exec_mem_op()
pm_runtime_resume_and_get()
cqspi_resume()
spi_controller_resume()
mutex_lock(&ctlr->bus_lock_mutex)
...
spi_mem_access_end()
mutex_unlock(&ctlr->bus_lock_mutex)
...
Fixes: 0578a6dbfe ("spi: spi-cadence-quadspi: add runtime pm support")
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://msgid.link/r/20240222-cdns-qspi-pm-fix-v4-2-6b6af8bcbf59@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dev_get_drvdata() gets used to acquire the pointer to cqspi and the SPI
controller. Neither embed the other; this lead to memory corruption.
On a given platform (Mobileye EyeQ5) the memory corruption is hidden
inside cqspi->f_pdata. Also, this uninitialised memory is used as a
mutex (ctlr->bus_lock_mutex) by spi_controller_suspend().
Fixes: 2087e85bb6 ("spi: cadence-quadspi: fix suspend-resume implementations")
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://msgid.link/r/20240222-cdns-qspi-pm-fix-v4-1-6b6af8bcbf59@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When waiting for a syncobj timeline point whose fence has not yet been
submitted with the WAIT_FOR_SUBMIT flag, a callback is registered using
drm_syncobj_fence_add_wait and the thread is put to sleep until the
timeout expires. If the fence is submitted before then,
drm_syncobj_add_point will wake up the sleeping thread immediately which
will proceed to wait for the fence to be signaled.
However, if the WAIT_AVAILABLE flag is used instead,
drm_syncobj_fence_add_wait won't get called, meaning the waiting thread
will always sleep for the full timeout duration, even if the fence gets
submitted earlier. If it turns out that the fence *has* been submitted
by the time it eventually wakes up, it will still indicate to userspace
that the wait completed successfully (it won't return -ETIME), but it
will have taken much longer than it should have.
To fix this, we must call drm_syncobj_fence_add_wait if *either* the
WAIT_FOR_SUBMIT flag or the WAIT_AVAILABLE flag is set. The only
difference being that with WAIT_FOR_SUBMIT we will also wait for the
fence to be signaled after it has been submitted while with
WAIT_AVAILABLE we will return immediately.
IGT test patch: https://lists.freedesktop.org/archives/igt-dev/2024-January/067537.html
v1 -> v2: adjust lockdep_assert_none_held_once condition
(cherry picked from commit 8c44ea8163)
Fixes: 01d6c35783 ("drm/syncobj: add support for timeline point wait v8")
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20240119163208.3723457-1-ekurzinger@nvidia.com
At btrfs_use_block_rsv() we read the size of a block reserve without
locking its spinlock, which makes KCSAN complain because the size of a
block reserve is always updated while holding its spinlock. The report
from KCSAN is the following:
[653.313148] BUG: KCSAN: data-race in btrfs_update_delayed_refs_rsv [btrfs] / btrfs_use_block_rsv [btrfs]
[653.314755] read to 0x000000017f5871b8 of 8 bytes by task 7519 on cpu 0:
[653.314779] btrfs_use_block_rsv+0xe4/0x2f8 [btrfs]
[653.315606] btrfs_alloc_tree_block+0xdc/0x998 [btrfs]
[653.316421] btrfs_force_cow_block+0x220/0xe38 [btrfs]
[653.317242] btrfs_cow_block+0x1ac/0x568 [btrfs]
[653.318060] btrfs_search_slot+0xda2/0x19b8 [btrfs]
[653.318879] btrfs_del_csums+0x1dc/0x798 [btrfs]
[653.319702] __btrfs_free_extent.isra.0+0xc24/0x2028 [btrfs]
[653.320538] __btrfs_run_delayed_refs+0xd3c/0x2390 [btrfs]
[653.321340] btrfs_run_delayed_refs+0xae/0x290 [btrfs]
[653.322140] flush_space+0x5e4/0x718 [btrfs]
[653.322958] btrfs_preempt_reclaim_metadata_space+0x102/0x2f8 [btrfs]
[653.323781] process_one_work+0x3b6/0x838
[653.323800] worker_thread+0x75e/0xb10
[653.323817] kthread+0x21a/0x230
[653.323836] __ret_from_fork+0x6c/0xb8
[653.323855] ret_from_fork+0xa/0x30
[653.323887] write to 0x000000017f5871b8 of 8 bytes by task 576 on cpu 3:
[653.323906] btrfs_update_delayed_refs_rsv+0x1a4/0x250 [btrfs]
[653.324699] btrfs_add_delayed_data_ref+0x468/0x6d8 [btrfs]
[653.325494] btrfs_free_extent+0x76/0x120 [btrfs]
[653.326280] __btrfs_mod_ref+0x6a8/0x6b8 [btrfs]
[653.327064] btrfs_dec_ref+0x50/0x70 [btrfs]
[653.327849] walk_up_proc+0x236/0xa50 [btrfs]
[653.328633] walk_up_tree+0x21c/0x448 [btrfs]
[653.329418] btrfs_drop_snapshot+0x802/0x1328 [btrfs]
[653.330205] btrfs_clean_one_deleted_snapshot+0x184/0x238 [btrfs]
[653.330995] cleaner_kthread+0x2b0/0x2f0 [btrfs]
[653.331781] kthread+0x21a/0x230
[653.331800] __ret_from_fork+0x6c/0xb8
[653.331818] ret_from_fork+0xa/0x30
So add a helper to get the size of a block reserve while holding the lock.
Reading the field while holding the lock instead of using the data_race()
annotation is used in order to prevent load tearing.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At space_info.c we have several places where we access the ->reserved
field of a block reserve without taking the block reserve's spinlock
first, which makes KCSAN warn about a data race since that field is
always updated while holding the spinlock.
The reports from KCSAN are like the following:
[117.193526] BUG: KCSAN: data-race in btrfs_block_rsv_release [btrfs] / need_preemptive_reclaim [btrfs]
[117.195148] read to 0x000000017f587190 of 8 bytes by task 6303 on cpu 3:
[117.195172] need_preemptive_reclaim+0x222/0x2f0 [btrfs]
[117.195992] __reserve_bytes+0xbb0/0xdc8 [btrfs]
[117.196807] btrfs_reserve_metadata_bytes+0x4c/0x120 [btrfs]
[117.197620] btrfs_block_rsv_add+0x78/0xa8 [btrfs]
[117.198434] btrfs_delayed_update_inode+0x154/0x368 [btrfs]
[117.199300] btrfs_update_inode+0x108/0x1c8 [btrfs]
[117.200122] btrfs_dirty_inode+0xb4/0x140 [btrfs]
[117.200937] btrfs_update_time+0x8c/0xb0 [btrfs]
[117.201754] touch_atime+0x16c/0x1e0
[117.201789] filemap_read+0x674/0x728
[117.201823] btrfs_file_read_iter+0xf8/0x410 [btrfs]
[117.202653] vfs_read+0x2b6/0x498
[117.203454] ksys_read+0xa2/0x150
[117.203473] __s390x_sys_read+0x68/0x88
[117.203495] do_syscall+0x1c6/0x210
[117.203517] __do_syscall+0xc8/0xf0
[117.203539] system_call+0x70/0x98
[117.203579] write to 0x000000017f587190 of 8 bytes by task 11 on cpu 0:
[117.203604] btrfs_block_rsv_release+0x2e8/0x578 [btrfs]
[117.204432] btrfs_delayed_inode_release_metadata+0x7c/0x1d0 [btrfs]
[117.205259] __btrfs_update_delayed_inode+0x37c/0x5e0 [btrfs]
[117.206093] btrfs_async_run_delayed_root+0x356/0x498 [btrfs]
[117.206917] btrfs_work_helper+0x160/0x7a0 [btrfs]
[117.207738] process_one_work+0x3b6/0x838
[117.207768] worker_thread+0x75e/0xb10
[117.207797] kthread+0x21a/0x230
[117.207830] __ret_from_fork+0x6c/0xb8
[117.207861] ret_from_fork+0xa/0x30
So add a helper to get the reserved amount of a block reserve while
holding the lock. The value may be not be up to date anymore when used by
need_preemptive_reclaim() and btrfs_preempt_reclaim_metadata_space(), but
that's ok since the worst it can do is cause more reclaim work do be done
sooner rather than later. Reading the field while holding the lock instead
of using the data_race() annotation is used in order to prevent load
tearing.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we have a sparse file with a trailing hole (from the last extent's end
to i_size) and then create an extent in the file that ends before the
file's i_size, then when doing an incremental send we will issue a write
full of zeroes for the range that starts immediately after the new extent
ends up to i_size. While this isn't incorrect because the file ends up
with exactly the same data, it unnecessarily results in using extra space
at the destination with one or more extents full of zeroes instead of
having a hole. In same cases this results in using megabytes or even
gigabytes of unnecessary space.
Example, reproducer:
$ cat test.sh
#!/bin/bash
DEV=/dev/sdh
MNT=/mnt/sdh
mkfs.btrfs -f $DEV
mount $DEV $MNT
# Create 1G sparse file.
xfs_io -f -c "truncate 1G" $MNT/foobar
# Create base snapshot.
btrfs subvolume snapshot -r $MNT $MNT/mysnap1
# Create send stream (full send) for the base snapshot.
btrfs send -f /tmp/1.snap $MNT/mysnap1
# Now write one extent at the beginning of the file and one somewhere
# in the middle, leaving a gap between the end of this second extent
# and the file's size.
xfs_io -c "pwrite -S 0xab 0 128K" \
-c "pwrite -S 0xcd 512M 128K" \
$MNT/foobar
# Now create a second snapshot which is going to be used for an
# incremental send operation.
btrfs subvolume snapshot -r $MNT $MNT/mysnap2
# Create send stream (incremental send) for the second snapshot.
btrfs send -p $MNT/mysnap1 -f /tmp/2.snap $MNT/mysnap2
# Now recreate the filesystem by receiving both send streams and
# verify we get the same content that the original filesystem had
# and file foobar has only two extents with a size of 128K each.
umount $MNT
mkfs.btrfs -f $DEV
mount $DEV $MNT
btrfs receive -f /tmp/1.snap $MNT
btrfs receive -f /tmp/2.snap $MNT
echo -e "\nFile fiemap in the second snapshot:"
# Should have:
#
# 128K extent at file range [0, 128K[
# hole at file range [128K, 512M[
# 128K extent file range [512M, 512M + 128K[
# hole at file range [512M + 128K, 1G[
xfs_io -r -c "fiemap -v" $MNT/mysnap2/foobar
# File should be using 256K of data (two 128K extents).
echo -e "\nSpace used by the file: $(du -h $MNT/mysnap2/foobar | cut -f 1)"
umount $MNT
Running the test, we can see with fiemap that we get an extent for the
range [512M, 1G[, while in the source filesystem we have an extent for
the range [512M, 512M + 128K[ and a hole for the rest of the file (the
range [512M + 128K, 1G[):
$ ./test.sh
(...)
File fiemap in the second snapshot:
/mnt/sdh/mysnap2/foobar:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..255]: 26624..26879 256 0x0
1: [256..1048575]: hole 1048320
2: [1048576..2097151]: 2156544..3205119 1048576 0x1
Space used by the file: 513M
This happens because once we finish processing an inode, at
finish_inode_if_needed(), we always issue a hole (write operations full
of zeros) if there's a gap between the end of the last processed extent
and the file's size, even if that range is already a hole in the parent
snapshot. Fix this by issuing the hole only if the range is not already
a hole.
After this change, running the test above, we get the expected layout:
$ ./test.sh
(...)
File fiemap in the second snapshot:
/mnt/sdh/mysnap2/foobar:
EXT: FILE-OFFSET BLOCK-RANGE TOTAL FLAGS
0: [0..255]: 26624..26879 256 0x0
1: [256..1048575]: hole 1048320
2: [1048576..1048831]: 26880..27135 256 0x1
3: [1048832..2097151]: hole 1048320
Space used by the file: 256K
A test case for fstests will follow soon.
CC: stable@vger.kernel.org # 6.1+
Reported-by: Dorai Ashok S A <dash.btrfs@inix.me>
Link: https://lore.kernel.org/linux-btrfs/c0bf7818-9c45-46a8-b3d3-513230d0c86e@inix.me/
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
On a zoned filesystem with conventional zones, we're skipping the block
group profile checks for the conventional zones.
This allows converting a zoned filesystem's data block groups to RAID when
all of the zones backing the chunk are on conventional zones. But this
will lead to problems, once we're trying to allocate chunks backed by
sequential zones.
So also check for conventional zones when loading a block group's profile
on them.
Reported-by: HAN Yuwei <hrx@bupt.moe>
Link: https://lore.kernel.org/all/1ACD2E3643008A17+da260584-2c7f-432a-9e22-9d390aae84cc@bupt.moe/#t
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
l2tp_ip6_sendmsg needs to avoid accounting for the transport header
twice when splicing more data into an already partially-occupied skbuff.
To manage this, we check whether the skbuff contains data using
skb_queue_empty when deciding how much data to append using
ip6_append_data.
However, the code which performed the calculation was incorrect:
ulen = len + skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0;
...due to C operator precedence, this ends up setting ulen to
transhdrlen for messages with a non-zero length, which results in
corrupted packets on the wire.
Add parentheses to correct the calculation in line with the original
intent.
Fixes: 9d4c75800f ("ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data()")
Cc: David Howells <dhowells@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220122156.43131-1-tparkin@katalix.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit eb9299bead ("ACPI: EC: Use a spin lock without disabing
interrupts") introduced an unexpected user-visible change in
behavior, which is a significant CPU load increase when the EC
is in use.
This most likely happens due to increased spinlock contention
and so reducing this effect would require a major rework of the
EC driver locking. There is no time for this in the current
cycle, so revert commit eb9299bead.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218511
Reported-by: Dieter Mummenschanz <dmummenschanz@web.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) If user requests to wake up a table and hook fails, restore the
dormant flag from the error path, from Florian Westphal.
2) Reset dst after transferring it to the flow object, otherwise dst
gets released twice from the error path.
3) Release dst in case the flowtable selects a direct xmit path, eg.
transmission to bridge port. Otherwise, dst is memleaked.
4) Register basechain and flowtable hooks at the end of the command.
Error path releases these datastructure without waiting for the
rcu grace period.
5) Use kzalloc() to initialize struct nft_hook to fix a KMSAN report
on access to hook type, also from Florian Westphal.
netfilter pull request 24-02-22
* tag 'nf-24-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: use kzalloc for hook allocation
netfilter: nf_tables: register hooks last when adding new chain/flowtable
netfilter: nft_flow_offload: release dst in case direct xmit path is used
netfilter: nft_flow_offload: reset dst in route object after setting up flow
netfilter: nf_tables: set dormant flag on hook register failure
====================
Link: https://lore.kernel.org/r/20240222000843.146665-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf 2024-02-22
The following pull-request contains BPF updates for your *net* tree.
We've added 11 non-merge commits during the last 24 day(s) which contain
a total of 15 files changed, 217 insertions(+), 17 deletions(-).
The main changes are:
1) Fix a syzkaller-triggered oops when attempting to read the vsyscall
page through bpf_probe_read_kernel and friends, from Hou Tao.
2) Fix a kernel panic due to uninitialized iter position pointer in
bpf_iter_task, from Yafang Shao.
3) Fix a race between bpf_timer_cancel_and_free and bpf_timer_cancel,
from Martin KaFai Lau.
4) Fix a xsk warning in skb_add_rx_frag() (under CONFIG_DEBUG_NET)
due to incorrect truesize accounting, from Sebastian Andrzej Siewior.
5) Fix a NULL pointer dereference in sk_psock_verdict_data_ready,
from Shigeru Yoshida.
6) Fix a resolve_btfids warning when bpf_cpumask symbol cannot be
resolved, from Hari Bathini.
bpf-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Fix NULL pointer dereference in sk_psock_verdict_data_ready()
selftests/bpf: Add negtive test cases for task iter
bpf: Fix an issue due to uninitialized bpf_iter_task
selftests/bpf: Test racing between bpf_timer_cancel_and_free and bpf_timer_cancel
bpf: Fix racing between bpf_timer_cancel_and_free and bpf_timer_cancel
selftest/bpf: Test the read of vsyscall page under x86-64
x86/mm: Disallow vsyscall page read for copy_from_kernel_nofault()
x86/mm: Move is_vsyscall_vaddr() into asm/vsyscall.h
bpf, scripts: Correct GPL license name
xsk: Add truesize to skb_add_rx_frag().
bpf: Fix warning for bpf_cpumask in verifier
====================
Link: https://lore.kernel.org/r/20240221231826.1404-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit bb726b753f ("net: phy: realtek: add support for
RTL8211F(D)(I)-VD-CG") extended support of the driver from the existing
support for RTL8211F(D)(I)-CG PHY to the newer RTL8211F(D)(I)-VD-CG PHY.
While that commit indicated that the RTL8211F_PHYCR2 register is not
supported by the "VD-CG" PHY model and therefore updated the corresponding
section in rtl8211f_config_init() to be invoked conditionally, the call to
"genphy_soft_reset()" was left as-is, when it should have also been invoked
conditionally. This is because the call to "genphy_soft_reset()" was first
introduced by the commit 0a4355c2b7 ("net: phy: realtek: add dt property
to disable CLKOUT clock") since the RTL8211F guide indicates that a PHY
reset should be issued after setting bits in the PHYCR2 register.
As the PHYCR2 register is not applicable to the "VD-CG" PHY model, fix the
rtl8211f_config_init() function by invoking "genphy_soft_reset()"
conditionally based on the presence of the "PHYCR2" register.
Fixes: bb726b753f ("net: phy: realtek: add support for RTL8211F(D)(I)-VD-CG")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220070007.968762-1-s-vadapalli@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ioam6_parser uses a packet socket. After the fix to prevent writing to
cloned skb's, the receiver does not see its IOAM data anymore, which
makes input/forward ioam-selftests to fail. As a workaround,
ioam6_parser now uses an IPv6 raw socket and leverages ancillary data to
get hop-by-hop options. As a consequence, the hook is "after" the IOAM
data insertion by the receiver and all tests are working again.
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ioam6_fill_trace_data() writes inside the skb payload without ensuring
it's writeable (e.g., not cloned). This function is called both from the
input and output path. The output path (ioam6_iptunnel) already does the
check. This commit provides a fix for the input path, inside
ipv6_hop_ioam(). It also updates ip6_parse_tlv() to refresh the network
header pointer ("nh") when returning from ipv6_hop_ioam().
Fixes: 9ee11f0fff ("ipv6: ioam: Data plane support for Pre-allocated Trace")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The receive queues are protected by their respective spin-lock, not
the socket lock. This could lead to skb_peek() unexpectedly
returning NULL or a pointer to an already dequeued socket buffer.
Fixes: 9641458d3e ("Phonet: Pipe End Point for Phonet Pipes protocol")
Signed-off-by: Rémi Denis-Courmont <courmisch@gmail.com>
Link: https://lore.kernel.org/r/20240218081214.4806-2-remi@remlab.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In erofs_find_target_block() when erofs_dirnamecmp() returns 0,
we do not assign the target metabuf. This causes the caller
erofs_namei()'s erofs_put_metabuf() at the end to be not effective
leaving the refcount on the page.
As the page from metabuf (buf->page) is never put, such page cannot be
migrated or reclaimed. Fix it now by putting the metabuf from
previous loop and assigning the current metabuf to target before
returning so caller erofs_namei() can do the final put as it was
intended.
Fixes: 500edd0956 ("erofs: use meta buffers for inode lookup")
Cc: <stable@vger.kernel.org> # 5.18+
Signed-off-by: Sandeep Dhavale <dhavale@google.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20240221210348.3667795-1-dhavale@google.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Both registers used when doing manual injection or fdma injection are
shared between all the net devices of the switch. It was noticed that
when having two process which each of them trying to inject frames on
different ethernet ports, that the HW started to behave strange, by
sending out more frames then expected. When doing fdma injection it is
required to set the frame in the DCB and then make sure that the next
pointer of the last DCB is invalid. But because there is no locks for
this, then easily this pointer between the DCB can be broken and then it
would create a loop of DCBs. And that means that the HW will
continuously transmit these frames in a loop. Until the SW will break
this loop.
Therefore to fix this issue, add a spin lock for when accessing the
registers for manual or fdma injection.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Fixes: f3cad2611a ("net: sparx5: add hostmode with phylink support")
Link: https://lore.kernel.org/r/20240219080043.1561014-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Unlike other commands, due to a c&p error, port dump fills-up cmd with
wrong value, different from port-get request cmd, port-get doit reply
and port notification.
Fix it by filling cmd with value DEVLINK_CMD_PORT_NEW.
Skimmed through devlink userspace implementations, none of them cares
about this cmd value. Only ynl, for which, this is actually a fix, as it
expects doit and dumpit ops rsp_value to be the same.
Omit the fixes tag, even thought this is fix, better to target this for
next release.
Fixes: bfcd3a4661 ("Introduce devlink infrastructure")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240220075245.75416-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix EST offset for dwmac 5.10.
Currently configuring Qbv doesn't work as expected. The schedule is
configured, but never confirmed:
|[ 128.250219] imx-dwmac 428a0000.ethernet eth1: configured EST
The reason seems to be the refactoring of the EST code which set the wrong
EST offset for the dwmac 5.10. After fixing this it works as before:
|[ 106.359577] imx-dwmac 428a0000.ethernet eth1: configured EST
|[ 128.430715] imx-dwmac 428a0000.ethernet eth1: EST: SWOL has been switched
Tested on imx93.
Fixes: c3f3b97238 ("net: stmmac: Refactor EST implementation")
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Link: https://lore.kernel.org/r/20240220-stmmac_est-v1-1-c41f9ae2e7b7@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is one common error handler in ynl - ynl_cb_error().
It expects priv to be a pointer to struct ynl_parse_arg AKA yarg.
To avoid potential crashes if we encounter a stray NLMSG_ERROR
always pass yarg as priv (or a struct which has it as the first
member).
ynl_cb_null() has a similar problem directly - it expects yarg
but priv passed by the caller is ys.
Found by code inspection.
Fixes: 86878f14d7 ("tools: ynl: user space helpers")
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240220161112.2735195-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
KMSAN reports unitialized variable when registering the hook,
reg->hook_ops_type == NF_HOOK_OP_BPF)
~~~~~~~~~~~ undefined
This is a small structure, just use kzalloc to make sure this
won't happen again when new fields get added to nf_hook_ops.
Fixes: 7b4b2fa375 ("netfilter: annotate nf_tables base hook ops")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Register hooks last when adding chain/flowtable to ensure that packets do
not walk over datastructure that is being released in the error path
without waiting for the rcu grace period.
Fixes: 91c7b38dc9 ("netfilter: nf_tables: use new transaction infrastructure to handle chain")
Fixes: 3b49e2e94e ("netfilter: nf_tables: add flow table netlink frontend")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
dst is transferred to the flow object, route object does not own it
anymore. Reset dst in route object, otherwise if flow_offload_add()
fails, error path releases dst twice, leading to a refcount underflow.
Fixes: a3c90f7a23 ("netfilter: nf_tables: flow offload expression")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We need to set the dormant flag again if we fail to register
the hooks.
During memory pressure hook registration can fail and we end up
with a table marked as active but no registered hooks.
On table/base chain deletion, nf_tables will attempt to unregister
the hook again which yields a warn splat from the nftables core.
Reported-and-tested-by: syzbot+de4025c006ec68ac56fc@syzkaller.appspotmail.com
Fixes: 179d9ba555 ("netfilter: nf_tables: fix table flag updates")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Nathan Chancellor <nathan@kernel.org> says:
Eric reported that builds of LLVM with [1] (close to tip of tree) have
CONFIG_AS_HAS_OPTION_ARCH=n because the test for expected failure on
invalid input has started succeeding.
This Kconfig test was added because '.option arch' only causes an
assembler warning when it is unsupported, rather than a hard error,
which is what users of as-instr expect when something is unsupported.
This can be resolved by turning assembler warnings into errors with
'-Wa,--fatal-warnings' like we do with the compiler with '-Werror',
which is what the first patch does. The second patch removes the invalid
test, as the valid test is good enough with fatal warnings.
I have diffed several configurations for the different architectures
that use as-instr and I have found no issues.
[1]: 3ac9fe69f7
* b4-shazam-merge:
RISC-V: Drop invalid test from CONFIG_AS_HAS_OPTION_ARCH
kbuild: Add -Wa,--fatal-warnings to as-instr invocation
Link: https://lore.kernel.org/r/20240125-fix-riscv-option-arch-llvm-18-v1-0-390ac9cc3cd0@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Sabrina Dubroca says:
====================
tls: fixes for record type handling with PEEK
There are multiple bugs in tls_sw_recvmsg's handling of record types
when MSG_PEEK flag is used, which can lead to incorrectly merging two
records:
- consecutive non-DATA records shouldn't be merged, even if they're
the same type (partly handled by the test at the end of the main
loop)
- records of the same type (even DATA) shouldn't be merged if one
record of a different type comes in between
====================
Link: https://lore.kernel.org/r/cover.1708007371.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If we queue 3 records:
- record 1, type DATA
- record 2, some other type
- record 3, type DATA
and do a recv(PEEK), the rx_list will contain the first two records.
The next large recv will walk through the rx_list and copy data from
record 1, then stop because record 2 is a different type. Since we
haven't filled up our buffer, we will process the next available
record. It's also DATA, so we can merge it with the current read.
We shouldn't do that, since there was a record in between that we
ignored.
Add a flag to let process_rx_list inform tls_sw_recvmsg that it had
more data available.
Fixes: 692d7b5d1f ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/f00c0c0afa080c60f016df1471158c1caf983c34.1708007371.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If we have a non-DATA record on the rx_list and another record of the
same type still on the queue, we will end up merging them:
- process_rx_list copies the non-DATA record
- we start the loop and process the first available record since it's
of the same type
- we break out of the loop since the record was not DATA
Just check the record type and jump to the end in case process_rx_list
did some work.
Fixes: 692d7b5d1f ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/bd31449e43bd4b6ff546f5c51cf958c31c511deb.1708007371.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
PEEK needs to leave decrypted records on the rx_list so that we can
receive them later on, so it jumps back into the async code that
queues the skb. Unfortunately that makes us skip the
TLS_RECORD_TYPE_DATA check at the bottom of the main loop, so if two
records of the same (non-DATA) type are queued, we end up merging
them.
Add the same record type check, and make it unlikely to not penalize
the async fastpath. Async decrypt only applies to data record, so this
check is only needed for PEEK.
process_rx_list also has similar issues.
Fixes: 692d7b5d1f ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/3df2eef4fdae720c55e69472b5bea668772b45a2.1708007371.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Akira Yokosawa reported [1] that the "translations" extension we added in
commit 7418ec5b15 ("docs: translations: add translations links when they
exist") broke the build on Sphinx versions v6.1.3 through 7.1.2 (possibly
others) with the following error:
Exception occurred:
File "/usr/lib/python3.12/site-packages/sphinx/util/nodes.py", line 624, in _copy_except__document
newnode = self.__class__(rawsource=self.rawsource, **self.attributes)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
TypeError: LanguagesNode.__init__() missing 1 required positional argument: 'current_language'
The full traceback has been saved in /tmp/sphinx-err-7xmwytuu.log, if you want to report the issue to the developers.
Solve this problem by making 'current_language' a true element attribute
of the LanguagesNode element, which is probably the more correct way to do
it anyway.
Tested on Sphinx 2.x, 3.x, 6.x, and 7.x.
[1]: https://lore.kernel.org/all/54a56c2e-a27c-45a0-b712-02a7bc7d2673@gmail.com/
Fixes: 7418ec5b15 ("docs: translations: add translations links when they exist")
Reported-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Closes: https://lore.kernel.org/all/54a56c2e-a27c-45a0-b712-02a7bc7d2673@gmail.com/
Tested-by: Akira Yokosawa <akiyks@gmail.com> # Sphinx 4.3.2, 5.3.0 and 6.2.1
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240215064109.1193556-1-vegard.nossum@oracle.com
The GIC/ITS code is designed to ensure to pick up any preallocated LPI
tables on the redistributors, as enabling LPIs is a one-way switch. There
is no such restriction for vLPIs, and for GICv4.1 it is expected to
allocate a new vPE table at boot.
This works as intended when initializing an ITS, however when setting up a
redistributor in cpu_init_lpis() the early return for preallocated RD
tables skips straight past the GICv4 setup. This all comes to a head when
trying to kexec() into a new kernel, as the new kernel silently fails to
set up GICv4, leading to a complete loss of SGIs and LPIs for KVM VMs.
Slap a band-aid on the problem by ensuring its_cpu_init_lpis() always
initializes GICv4 on the way out, even if the other RD tables were
preallocated.
Fixes: 6479450f72 ("irqchip/gic-v4: Fix occasional VLPI drop")
Reported-by: George Cherian <gcherian@marvell.com>
Co-developed-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240219185809.286724-2-oliver.upton@linux.dev
For regular system shutdown, ata_dev_power_set_standby() will be
executed twice: once the scsi device is removed and another when
ata_pci_shutdown_one() executes and EH completes unloading the devices.
Make the second call to ata_dev_power_set_standby() do nothing by using
ata_dev_power_is_active() and return if the device is already in
standby.
Fixes: 2da4c5e24e ("ata: libata-core: Improve ata_dev_power_set_active()")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
bus_get_dev_root() returns sp->dev_root which is set in subsys_register(),
but subsys_register() is not called by platform_bus_init().
Therefor for the platform_bus_type, bus_get_dev_root() always returns NULL.
This makes mbigen_of_create_domain() always return -ENODEV.
Don't try to retrieve the parent via bus_get_dev_root() and
unconditionally hand a NULL pointer to of_platform_device_create() to
fix this.
Fixes: fea087fc29 ("irqchip/mbigen: move to use bus_get_dev_root()")
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240220111429.110666-1-chenjun102@huawei.com
Pull kvm fixes from Paolo Bonzini:
"Two fixes for ARM ITS emulation. Unmapped interrupts were used instead
of ignored, causing NULL pointer dereferences"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: vgic-its: Test for valid IRQ in MOVALL handler
KVM: arm64: vgic-its: Test for valid IRQ in its_sync_lpi_pending_table()
Pull btrfs fixes from David Sterba:
- Fix a deadlock in fiemap.
There was a big lock around the whole operation that can interfere
with a page fault and mkwrite.
Reducing the lock scope can also speed up fiemap
- Fix range condition for extent defragmentation which could lead to
worse layout in some cases
* tag 'for-6.8-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix deadlock with fiemap and extent locking
btrfs: defrag: avoid unnecessary defrag caused by incorrect extent size
Pull crypto fix from Herbert Xu:
"Fix a stack overflow in virtio"
* tag 'v6.8-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: virtio/akcipher - Fix stack overflow on memcpy
syzbot reported the following NULL pointer dereference issue [1]:
BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
RIP: 0010:0x0
[...]
Call Trace:
<TASK>
sk_psock_verdict_data_ready+0x232/0x340 net/core/skmsg.c:1230
unix_stream_sendmsg+0x9b4/0x1230 net/unix/af_unix.c:2293
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg+0x221/0x270 net/socket.c:745
____sys_sendmsg+0x525/0x7d0 net/socket.c:2584
___sys_sendmsg net/socket.c:2638 [inline]
__sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667
do_syscall_64+0xf9/0x240
entry_SYSCALL_64_after_hwframe+0x6f/0x77
If sk_psock_verdict_data_ready() and sk_psock_stop_verdict() are called
concurrently, psock->saved_data_ready can be NULL, causing the above issue.
This patch fixes this issue by calling the appropriate data ready function
using the sk_psock_data_ready() helper and protecting it from concurrency
with sk->sk_callback_lock.
Fixes: 6df7f764cd ("bpf, sockmap: Wake up polling after data copy")
Reported-by: syzbot+fd7b34375c1c8ce29c93@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+fd7b34375c1c8ce29c93@syzkaller.appspotmail.com
Acked-by: John Fastabend <john.fastabend@gmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=fd7b34375c1c8ce29c93 [1]
Link: https://lore.kernel.org/bpf/20240218150933.6004-1-syoshida@redhat.com
If kiocb_set_cancel_fn() is called for I/O submitted via io_uring, the
following kernel warning appears:
WARNING: CPU: 3 PID: 368 at fs/aio.c:598 kiocb_set_cancel_fn+0x9c/0xa8
Call trace:
kiocb_set_cancel_fn+0x9c/0xa8
ffs_epfile_read_iter+0x144/0x1d0
io_read+0x19c/0x498
io_issue_sqe+0x118/0x27c
io_submit_sqes+0x25c/0x5fc
__arm64_sys_io_uring_enter+0x104/0xab0
invoke_syscall+0x58/0x11c
el0_svc_common+0xb4/0xf4
do_el0_svc+0x2c/0xb0
el0_svc+0x2c/0xa4
el0t_64_sync_handler+0x68/0xb4
el0t_64_sync+0x1a4/0x1a8
Fix this by setting the IOCB_AIO_RW flag for read and write I/O that is
submitted by libaio.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Avi Kivity <avi@scylladb.com>
Cc: Sandeep Dhavale <dhavale@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: stable@vger.kernel.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240215204739.2677806-2-bvanassche@acm.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
In the case where __lpass_get_dmactl_handle is called and the driver
id dai_id is invalid the pointer dmactl is not being assigned a value,
and dmactl contains a garbage value since it has not been initialized
and so the null check may not work. Fix this to initialize dmactl to
NULL. One could argue that modern compilers will set this to zero, but
it is useful to keep this initialized as per the same way in functions
__lpass_platform_codec_intf_init and lpass_cdc_dma_daiops_hw_params.
Cleans up clang scan build warning:
sound/soc/qcom/lpass-cdc-dma.c:275:7: warning: Branch condition
evaluates to a garbage value [core.uninitialized.Branch]
Fixes: b81af585ea ("ASoC: qcom: Add lpass CPU driver for codec dma control")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://msgid.link/r/20240221134804.3475989-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The cited commit [1] added framer support under drivers/net/wan,
which is covered by NETWORKING [GENERAL]. And it is implied
that framer-provider.h and framer.h, which were also added
buy the same patch, are also maintained as part of NETWORKING [GENERAL].
Make this explicit by adding these files to the corresponding
section in MAINTAINERS.
[1] 82c944d05b ("net: wan: Add framer framework support")
Signed-off-by: Simon Horman <horms@kernel.org>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot reported another task hung in __unix_gc(). [0]
The current while loop assumes that all of the left candidates
have oob_skb and calling kfree_skb(oob_skb) releases the remaining
candidates.
However, I missed a case that oob_skb has self-referencing fd and
another fd and the latter sk is placed before the former in the
candidate list. Then, the while loop never proceeds, resulting
the task hung.
__unix_gc() has the same loop just before purging the collected skb,
so we can call kfree_skb(oob_skb) there and let __skb_queue_purge()
release all inflight sockets.
[0]:
Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1
CPU: 1 PID: 2784 Comm: kworker/u4:8 Not tainted 6.8.0-rc4-syzkaller-01028-g71b605d32017 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024
Workqueue: events_unbound __unix_gc
RIP: 0010:__sanitizer_cov_trace_pc+0x0/0x70 kernel/kcov.c:200
Code: 89 fb e8 23 00 00 00 48 8b 3d 84 f5 1a 0c 48 89 de 5b e9 43 26 57 00 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 <f3> 0f 1e fa 48 8b 04 24 65 48 8b 0d 90 52 70 7e 65 8b 15 91 52 70
RSP: 0018:ffffc9000a17fa78 EFLAGS: 00000287
RAX: ffffffff8a0a6108 RBX: ffff88802b6c2640 RCX: ffff88802c0b3b80
RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000000
RBP: ffffc9000a17fbf0 R08: ffffffff89383f1d R09: 1ffff1100ee5ff84
R10: dffffc0000000000 R11: ffffed100ee5ff85 R12: 1ffff110056d84ee
R13: ffffc9000a17fae0 R14: 0000000000000000 R15: ffffffff8f47b840
FS: 0000000000000000(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffef5687ff8 CR3: 0000000029b34000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<NMI>
</NMI>
<TASK>
__unix_gc+0xe69/0xf40 net/unix/garbage.c:343
process_one_work kernel/workqueue.c:2633 [inline]
process_scheduled_works+0x913/0x1420 kernel/workqueue.c:2706
worker_thread+0xa5f/0x1000 kernel/workqueue.c:2787
kthread+0x2ef/0x390 kernel/kthread.c:388
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:242
</TASK>
Reported-and-tested-by: syzbot+ecab4d36f920c3574bf9@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ecab4d36f920c3574bf9
Fixes: 25236c91b5 ("af_unix: Fix task hung while purging oob_skb in GC.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In newer hardware, IPA supports more than 32 endpoints. Some
registers--such as IPA interrupt registers--represent endpoints
as bits in a 4-byte register, and such registers are repeated as
needed to represent endpoints beyond the first 32.
In ipa_interrupt_suspend_clear_all(), we clear all pending IPA
suspend interrupts by reading all status register(s) and writing
corresponding registers to clear interrupt conditions.
Unfortunately the number of registers to read/write is calculated
incorrectly, and as a result we access *many* more registers than
intended. This bug occurs only when the IPA hardware signals a
SUSPEND interrupt, which happens when a packet is received for an
endpoint (or its underlying GSI channel) that is suspended. This
situation is difficult to reproduce, but possible.
Fix this by correctly computing the number of interrupt registers to
read and write. This is the only place in the code where registers
that map endpoints or channels this way perform this calculation.
Fixes: f298ba785e ("net: ipa: add a parameter to suspend registers")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
AF reserves MCAM entries for each PF, VF present in the
system and populates the entry with DMAC and action with
default RSS so that basic packet I/O works. Since PF/VF is
not aware of the RSS action installed by AF, AF only fixup
the actions of the rules installed by PF/VF with corresponding
default RSS action. This worked well for rules installed by
PF/VF for features like RX VLAN offload and DMAC filters but
rules involving action like drop/forward to queue are also
getting modified by AF. Hence fix it by setting the default
RSS action only if requested by PF/VF.
Fixes: 967db3529e ("octeontx2-af: add support for multicast/promisc packet replication feature")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
KVM/arm64 fixes for 6.8, take #3
- Check for the validity of interrupts handled by a MOVALL
command
- Check for the validity of interrupts while reading the
pending state on enabling LPIs.
On 32-bit builds, the vt-d driver causes a warning with clang:
drivers/iommu/intel/nested.c:112:13: error: result of comparison of constant 18446744073709551615 with expression of type 'unsigned long' is always false [-Werror,-Wtautological-constant-out-of-range-compare]
112 | if (npages == U64_MAX)
| ~~~~~~ ^ ~~~~~~~
Make the variable a 64-bit type, which matches both the caller and the
use anyway.
Fixes: f6f3721244 ("iommu/vt-d: Add iotlb flush for nested domain")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240213095832.455245-1-arnd@kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Setting dirty tracking for a s2 domain requires to loop all the related
devices and set the dirty tracking enable bit in the PASID table entry.
This includes the devices that are attached to the nested domains of a
s2 domain if this s2 domain is used as parent. However, the existing dirty
tracking set only loops s2 domain's own devices. It will miss dirty page
logs in the parent domain.
Now, the parent domain tracks the nested domains, so it can loop the
nested domains and the devices attached to the nested domains to ensure
dirty tracking on the parent is set completely.
Fixes: b41e38e225 ("iommu/vt-d: Add nested domain allocation")
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240208082307.15759-9-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
ATS-capable devices cache the result of nested translation. This result
relies on the mappings in s2 domain (a.k.a. parent). When there are
modifications in the s2 domain, the related nested translation caches on
the device should be flushed. This includes the devices that are attached
to the s1 domain. However, the existing code ignores this fact to only
loops its own devices.
As there is no easy way to identify the exact set of nested translations
affected by the change of s2 domain. So, this just flushes the entire
device iotlb on the device.
As above, driver loops the s2 domain's s1_domains list and loops the
devices list of each s1_domain to flush the entire device iotlb on the
devices.
Fixes: b41e38e225 ("iommu/vt-d: Add nested domain allocation")
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240208082307.15759-6-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
If a domain is used as the parent in nested translation its mappings might
be cached using DID of the nested domain. But the existing code ignores
this fact to only invalidate the iotlb entries tagged by the domain's own
DID.
Loop the s1_domains list, if any, to invalidate all iotlb entries related
to the target s2 address range. According to VT-d spec there is no need for
software to explicitly flush the affected s1 cache. It's implicitly done by
HW when s2 cache is invalidated.
Fixes: b41e38e225 ("iommu/vt-d: Add nested domain allocation")
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240208082307.15759-4-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Today the parent domain (s2_domain) is unaware of which DID's are
used by and which devices are attached to nested domains (s1_domain)
nested on it. This leads to a problem that some operations (flush
iotlb/devtlb and enable dirty tracking) on parent domain only apply to
DID's and devices directly tracked in the parent domain hence are
incomplete.
This tracks the nested domains in list in parent domain. With this,
operations on parent domain can loop the nested domains and refer to
the devices and iommu_array to ensure the operations on parent domain
take effect on all the affected devices and iommus.
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240208082307.15759-2-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Commit 1fd4a5a36f ("drm/connector: Rename legacy TV property") failed
to update all the users of the struct drm_tv_connector_state mode field,
which resulted in a build failure in i915.
However, a subsequent commit in the same series reintroduced a mode
field in that structure, with a different semantic but the same type,
with the assumption that all previous users were updated.
Since that didn't happen, the i915 driver now compiles, but mixes
accesses to the legacy_mode field and the newer mode field, but with the
previous semantics.
This obviously doesn't work very well, so we need to update the accesses
that weren't in the legacy renaming commit.
Fixes: 1fd4a5a36f ("drm/connector: Rename legacy TV property")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220131251.453060-1-mripard@kernel.org
(cherry picked from commit bf7626f19d)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The expectation is that cxl_parse_cfwms() continues in the face the of
failure as evidenced by code like:
cxlrd = cxl_root_decoder_alloc(root_port, ways, cxl_calc_hb);
if (IS_ERR(cxlrd))
return 0;
There are other error paths in that function which mistakenly follow
idiomatic expectations and return an error when they should not. Most of
those mistakes are innocuous checks that hardly ever fail in practice.
However, a recent change succeed in making the implementation more
fragile by applying an idiomatic, but still wrong "fix" [1]. In this
failure case the kernel reports:
cxl root0: Failed to populate active decoder targets
cxl_acpi ACPI0017:00: Failed to add decode range: [mem 0x00000000-0x7fffffff flags 0x200]
...which is a real issue with that one window (to be fixed separately),
but ends up failing the entirety of cxl_acpi_probe().
Undo that recent breakage while also removing the confusion about
ignoring errors. Update all exits paths to return an error per typical
expectations and let an outer wrapper function handle dropping the
error.
Fixes: 91019b5bc7 ("cxl/acpi: Return 'rc' instead of '0' in cxl_parse_cfmws()") [1]
Cc: <stable@vger.kernel.org>
Cc: Breno Leitao <leitao@debian.org>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Initial tests with the CXL CPER implementation identified that error
reports were being duplicated in the log and the trace event [1]. Then
it was discovered that the notification handler took sleeping locks
while the GHES event handling runs in spin_lock_irqsave() context [2]
While the duplicate reporting was fixed in v6.8-rc4, the fix for the
sleeping-lock-vs-atomic collision would enjoy more time to settle and
gain some test cycles. Given how late it is in the development cycle,
remove the CXL hookup for now and try again during the next merge
window.
Note that end result is that v6.8 does not emit CXL CPER payloads to the
kernel log, but this is in line with the CXL trend to move error
reporting to trace events instead of the kernel log.
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: http://lore.kernel.org/r/20240108165855.00002f5a@Huawei.com [1]
Closes: http://lore.kernel.org/r/b963c490-2c13-4b79-bbe7-34c6568423c7@moroto.mountain [2]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull rdma fixes from Jason Gunthorpe:
"Mostly irdma and bnxt_re fixes:
- Missing error unwind in hf1
- For bnxt - fix fenching behavior to work on new chips, fail
unsupported SRQ resize back to userspace, propogate SRQ FW failure
back to userspace.
- Correctly fail unsupported SRQ resize back to userspace in bnxt
- Adjust a memcpy in mlx5 to not overflow a struct field.
- Prevent userspace from triggering mlx5 fw syndrome logging from
sysfs
- Use the correct access mode for MLX5_IB_METHOD_DEVX_OBJ_MODIFY to
avoid a userspace failure on modify
- For irdma - Don't UAF a concurrent tasklet during destroy, prevent
userspace from issuing invalid QP attrs, fix a possible CQ
overflow, capture a missing HW async error event
- sendmsg() triggerable memory access crash in hfi1
- Fix the srpt_service_guid parameter to not crash due to missing
function pointer
- Don't leak objects in error unwind in qedr
- Don't weirdly cast function pointers in srpt"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/srpt: fix function pointer cast warnings
RDMA/qedr: Fix qedr_create_user_qp error flow
RDMA/srpt: Support specifying the srpt_service_guid parameter
IB/hfi1: Fix sdma.h tx->num_descs off-by-one error
RDMA/irdma: Add AE for too many RNRS
RDMA/irdma: Set the CQ read threshold for GEN 1
RDMA/irdma: Validate max_send_wr and max_recv_wr
RDMA/irdma: Fix KASAN issue with tasklet
RDMA/mlx5: Relax DEVX access upon modify commands
IB/mlx5: Don't expose debugfs entries for RRoCE general parameters if not supported
RDMA/mlx5: Fix fortify source warning while accessing Eth segment
RDMA/bnxt_re: Add a missing check in bnxt_qplib_query_srq
RDMA/bnxt_re: Return error for SRQ resize
RDMA/bnxt_re: Fix unconditional fence for newer adapters
RDMA/bnxt_re: Remove a redundant check inside bnxt_re_vf_res_config
RDMA/bnxt_re: Avoid creating fence MR for newer adapters
IB/hfi1: Fix a memleak in init_credit_return
release_free_meta() accesses the shadow directly through the path
kasan_slab_free
__kasan_slab_free
kasan_release_object_meta
release_free_meta
kasan_mem_to_shadow
There are no kasan_arch_is_ready() guards here, allowing an oops when the
shadow is not initialized. The oops can be seen on a Power8 KVM guest.
This patch adds the guard to release_free_meta(), as it's the first level
that specifically requires the shadow.
It is safe to put the guard at the start of this function, before the
stack put: only kasan_save_free_info() can initialize the saved stack,
which itself is guarded with kasan_arch_is_ready() by its caller
poison_slab_object(). If the arch becomes ready before
release_free_meta() then we will not observe KASAN_SLAB_FREE_META in the
object's shadow, so we will not put an uninitialized stack either.
Link: https://lkml.kernel.org/r/20240213033958.139383-1-bgray@linux.ibm.com
Fixes: 63b85ac56a ("kasan: stop leaking stack trace handles")
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For online parameters change, DAMON_LRU_SORT creates new schemes based on
latest values of the parameters and replaces the old schemes with the new
one. When creating it, the internal status of the quotas of the old
schemes is not preserved. As a result, charging of the quota starts from
zero after the online tuning. The data that collected to estimate the
throughput of the scheme's action is also reset, and therefore the
estimation should start from the scratch again. Because the throughput
estimation is being used to convert the time quota to the effective size
quota, this could result in temporal time quota inaccuracy. It would be
recovered over time, though. In short, the quota accuracy could be
temporarily degraded after online parameters update.
Fix the problem by checking the case and copying the internal fields for
the status.
Link: https://lkml.kernel.org/r/20240216194025.9207-3-sj@kernel.org
Fixes: 40e983cca9 ("mm/damon: introduce DAMON-based LRU-lists Sorting")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: fix quota status loss due to online tunings".
DAMON_RECLAIM and DAMON_LRU_SORT is not preserving internal quota status
when applying new user parameters, and hence could cause temporal quota
accuracy degradation. Fix it by preserving the status.
This patch (of 2):
For online parameters change, DAMON_RECLAIM creates new scheme based on
latest values of the parameters and replaces the old scheme with the new
one. When creating it, the internal status of the quota of the old
scheme is not preserved. As a result, charging of the quota starts from
zero after the online tuning. The data that collected to estimate the
throughput of the scheme's action is also reset, and therefore the
estimation should start from the scratch again. Because the throughput
estimation is being used to convert the time quota to the effective size
quota, this could result in temporal time quota inaccuracy. It would be
recovered over time, though. In short, the quota accuracy could be
temporarily degraded after online parameters update.
Fix the problem by checking the case and copying the internal fields for
the status.
Link: https://lkml.kernel.org/r/20240216194025.9207-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240216194025.9207-2-sj@kernel.org
Fixes: e035c280f6 ("mm/damon/reclaim: support online inputs update")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.19+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
'commit_schemes_quota_goals' command handler,
damos_sysfs_set_quota_scores() assumes the number of schemes sysfs
directory will be same to the number of schemes of the DAMON context. The
assumption is wrong since users can remove schemes sysfs directories while
DAMON is running. In the case, illegal memory accesses can happen. Fix
it by checking the case.
Link: https://lkml.kernel.org/r/20240213023633.124928-1-sj@kernel.org
Fixes: d91beaa505 ("mm/damon/sysfs-schemes: implement a command for scheme quota goals only commit")
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Trying to run the iov_iter unit test on a nommu system such as the qemu
kc705-nommu emulation results in a crash.
KTAP version 1
# Subtest: iov_iter
# module: kunit_iov_iter
1..9
BUG: failure at mm/nommu.c:318/vmap()!
Kernel panic - not syncing: BUG!
The test calls vmap() directly, but vmap() is not supported on nommu
systems, causing the crash. TEST_IOV_ITER therefore needs to depend on
MMU.
Link: https://lkml.kernel.org/r/20240208153010.1439753-1-linux@roeck-us.net
Fixes: 2d71340ff1 ("iov_iter: Kunit tests for copying to/from an iterator")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Cc: David Howells <dhowells@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When skipping swapcache for SWP_SYNCHRONOUS_IO, if two or more threads
swapin the same entry at the same time, they get different pages (A, B).
Before one thread (T0) finishes the swapin and installs page (A) to the
PTE, another thread (T1) could finish swapin of page (B), swap_free the
entry, then swap out the possibly modified page reusing the same entry.
It breaks the pte_same check in (T0) because PTE value is unchanged,
causing ABA problem. Thread (T0) will install a stalled page (A) into the
PTE and cause data corruption.
One possible callstack is like this:
CPU0 CPU1
---- ----
do_swap_page() do_swap_page() with same entry
<direct swapin path> <direct swapin path>
<alloc page A> <alloc page B>
swap_read_folio() <- read to page A swap_read_folio() <- read to page B
<slow on later locks or interrupt> <finished swapin first>
... set_pte_at()
swap_free() <- entry is free
<write to page B, now page A stalled>
<swap out page B to same swap entry>
pte_same() <- Check pass, PTE seems
unchanged, but page A
is stalled!
swap_free() <- page B content lost!
set_pte_at() <- staled page A installed!
And besides, for ZRAM, swap_free() allows the swap device to discard the
entry content, so even if page (B) is not modified, if swap_read_folio()
on CPU0 happens later than swap_free() on CPU1, it may also cause data
loss.
To fix this, reuse swapcache_prepare which will pin the swap entry using
the cache flag, and allow only one thread to swap it in, also prevent any
parallel code from putting the entry in the cache. Release the pin after
PT unlocked.
Racers just loop and wait since it's a rare and very short event. A
schedule_timeout_uninterruptible(1) call is added to avoid repeated page
faults wasting too much CPU, causing livelock or adding too much noise to
perf statistics. A similar livelock issue was described in commit
029c4628b2 ("mm: swap: get rid of livelock in swapin readahead")
Reproducer:
This race issue can be triggered easily using a well constructed
reproducer and patched brd (with a delay in read path) [1]:
With latest 6.8 mainline, race caused data loss can be observed easily:
$ gcc -g -lpthread test-thread-swap-race.c && ./a.out
Polulating 32MB of memory region...
Keep swapping out...
Starting round 0...
Spawning 65536 workers...
32746 workers spawned, wait for done...
Round 0: Error on 0x5aa00, expected 32746, got 32743, 3 data loss!
Round 0: Error on 0x395200, expected 32746, got 32743, 3 data loss!
Round 0: Error on 0x3fd000, expected 32746, got 32737, 9 data loss!
Round 0 Failed, 15 data loss!
This reproducer spawns multiple threads sharing the same memory region
using a small swap device. Every two threads updates mapped pages one by
one in opposite direction trying to create a race, with one dedicated
thread keep swapping out the data out using madvise.
The reproducer created a reproduce rate of about once every 5 minutes, so
the race should be totally possible in production.
After this patch, I ran the reproducer for over a few hundred rounds and
no data loss observed.
Performance overhead is minimal, microbenchmark swapin 10G from 32G
zram:
Before: 10934698 us
After: 11157121 us
Cached: 13155355 us (Dropping SWP_SYNCHRONOUS_IO flag)
[kasong@tencent.com: v4]
Link: https://lkml.kernel.org/r/20240219082040.7495-1-ryncsn@gmail.com
Link: https://lkml.kernel.org/r/20240206182559.32264-1-ryncsn@gmail.com
Fixes: 0bcac06f27 ("mm, swap: skip swapcache for swapin of synchronous device")
Reported-by: "Huang, Ying" <ying.huang@intel.com>
Closes: https://lore.kernel.org/lkml/87bk92gqpx.fsf_-_@yhuang6-desk2.ccr.corp.intel.com/
Link: https://github.com/ryncsn/emm-test-project/tree/master/swap-stress-race [1]
Signed-off-by: Kairui Song <kasong@tencent.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Yu Zhao <yuzhao@google.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Chris Li <chrisl@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When a folio is swapped in, the protection size of the corresponding zswap
LRU is incremented, so that the zswap shrinker is more conservative with
its reclaiming action. This field is embedded within the struct lruvec,
so updating it requires looking up the folio's memcg and lruvec. However,
currently this lookup can happen after the folio is unlocked, for instance
if a new folio is allocated, and swap_read_folio() unlocks the folio
before returning. In this scenario, there is no stability guarantee for
the binding between a folio and its memcg and lruvec:
* A folio's memcg and lruvec can be freed between the lookup and the
update, leading to a UAF.
* Folio migration can clear the now-unlocked folio's memcg_data, which
directs the zswap LRU protection size update towards the root memcg
instead of the original memcg. This was recently picked up by the
syzbot thanks to a warning in the inlined folio_lruvec() call.
Move the zswap LRU protection range update above the swap_read_folio()
call, and only when a new page is allocated, to prevent this.
[nphamcs@gmail.com: add VM_WARN_ON_ONCE() to zswap_folio_swapin()]
Link: https://lkml.kernel.org/r/20240206180855.3987204-1-nphamcs@gmail.com
[nphamcs@gmail.com: remove unneeded if (folio) checks]
Link: https://lkml.kernel.org/r/20240206191355.83755-1-nphamcs@gmail.com
Link: https://lkml.kernel.org/r/20240205232442.3240571-1-nphamcs@gmail.com
Fixes: b5ba474f3f ("zswap: shrink zswap pool based on memory pressure")
Reported-by: syzbot+17a611d10af7d18a7092@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000ae47f90610803260@google.com/
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
kdamond_apply_schemes() checks apply intervals of schemes and avoid
further applying any schemes if no scheme passed its apply interval.
However, the following schemes applying function, damon_do_apply_schemes()
iterates all schemes without the apply interval check. As a result, the
shortest apply interval is applied to all schemes. Fix the problem by
checking the apply interval in damon_do_apply_schemes().
Link: https://lkml.kernel.org/r/20240205201306.88562-1-sj@kernel.org
Fixes: 42f994b714 ("mm/damon/core: implement scheme-specific apply interval")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [6.7.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In zswap_writeback_entry(), after we get a folio from
__read_swap_cache_async(), we grab the tree lock again to check that the
swap entry was not invalidated and recycled. If it was, we delete the
folio we just added to the swap cache and exit.
However, __read_swap_cache_async() returns the folio locked when it is
newly allocated, which is always true for this path, and the folio is
ref'd. Make sure to unlock and put the folio before returning.
This was discovered by code inspection, probably because this path handles
a race condition that should not happen often, and the bug would not crash
the system, it will only strand the folio indefinitely.
Link: https://lkml.kernel.org/r/20240125085127.1327013-1-yosryahmed@google.com
Fixes: 04fc781608 ("mm: fix zswap writeback race condition")
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The addition of the XFS online fsck documentation starting with
commit a8f6c2e54d ("xfs: document the motivation for online fsck design")
added a deeper level of nesting than LaTeX is prepared to deal with. That
caused a pdfdocs build failure with the helpful "Too deeply nested" error
message buried deeply in Documentation/output/filesystems.log.
Increase the "maxlistdepth" parameter to instruct LaTeX that it needs to
deal with the deeper nesting whether it wants to or not.
Suggested-by: Akira Yokosawa <akiyks@gmail.com>
Tested-by: Akira Yokosawa <akiyks@gmail.com>
Cc: stable@vger.kernel.org # v6.4+
Link: https://lore.kernel.org/linux-doc/67f6ac60-7957-4b92-9d72-a08fbad0e028@gmail.com/
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Commit 91fdbce7e8 ("ice: Add support in the driver for associating
queue with napi") invoked the netif_queue_set_napi() call. This
kernel function requires to be called with rtnl_lock taken,
otherwise ASSERT_RTNL() warning will be triggered. ice_vsi_rebuild()
initiating this call is under rtnl_lock when the rebuild is in
response to configuration changes from external interfaces (such as
tc, ethtool etc. which holds the lock). But, the VSI rebuild
generated from service tasks and resets (PFR/CORER/GLOBR) is not
under rtnl lock protection. Handle these cases as well to hold lock
before the kernel call (by setting the 'locked' boolean to false).
netif_queue_set_napi() is also used to clear previously set napi
in the q_vector unroll flow. Handle this for locked/lockless execution
paths.
Fixes: 91fdbce7e8 ("ice: Add support in the driver for associating queue with napi")
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Several Freescale Layerscape platforms extirq binding use a malformed
interrupt-map property missing parent address cells. These are
documented in of_irq_imap_abusers list in drivers/of/irq.c. In order to
enable dtc interrupt_map check tree wide, we need to disable it for
these platforms which will not be fixed (as that would break
compatibility).
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240213-arm-dt-cleanups-v1-1-f2dee1292525@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Some fixes to make devicetrees conform to bindings better (pwm irqs), dt
styling fixes (unneeded jaguar status, whitespaces, Cool Pi regulator
naming) and functionality fixes (px30 spi chipselect number, allowing
rk3588-evb1 to turn off, pcie lane numbers on CoolPi, wrong gpio-names
on Indidroid Nova and some CoolPi sdmmc aliases to match what uboot uses).
* tag 'v6.8-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: Correct Indiedroid Nova GPIO Names
arm64: dts: rockchip: Drop interrupts property from rk3328 pwm-rockchip node
arm64: dts: rockchip: set num-cs property for spi on px30
arm64: dts: rockchip: minor rk3588 whitespace cleanup
arm64: dts: rockchip: drop unneeded status from rk3588-jaguar gpio-leds
ARM: dts: rockchip: Drop interrupts property from pwm-rockchip nodes
arm64: dts: rockchip: Fix the num-lanes of pcie3x4 on Cool Pi CM5 EVB
arm64: dts: rockchip: rename vcc5v0_usb30_host regulator for Cool Pi CM5 EVB
arm64: dts: rockchip: aliase sdmmc as mmc1 for Cool Pi CM5 EVB
arm64: dts: rockchip: aliase sdmmc as mmc1 for Cool Pi 4B
arm64: dts: rockchip: mark system power controller on rk3588-evb1
Link: https://lore.kernel.org/r/2450634.jE0xQCEvom@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Guenter Roeck reports that commit a64056bb5a ("drm/tests/drm_buddy:
add alloc_contiguous test") causes build failures on 32-bit targets:
"This patch breaks the build on all 32-bit systems since it introduces
an unhandled direct 64-bit divide operation.
ERROR: modpost: "__umoddi3" [drivers/gpu/drm/tests/drm_buddy_test.ko] undefined!
ERROR: modpost: "__moddi3" [drivers/gpu/drm/tests/drm_buddy_test.ko] undefined!"
and the uses of 'u64' are all entirely pointless. Yes, the arguments to
drm_buddy_init() and drm_buddy_alloc_blocks() are in fact of type 'u64',
but none of the values here are remotely relevant, and the compiler will
happily just do the type expansion.
Of course, in a perfect world the compiler would also have just noticed
that all the values in question are tiny, and range analysis would have
shown that doing a 64-bit divide is pointless, but that is admittedly
expecting a fair amount of the compiler.
IOW, we shouldn't write code that the compiler then has to notice is
unnecessarily complicated just to avoid extra work. We do have fairly
high expectations of compilers, but kernel code should be reasonable to
begin with.
It turns out that there are also other issues with this code: the KUnit
assertion messages have incorrect types in the format strings, but
that's a widely spread issue caused by the KUnit infrastructure not
having enabled format string verification. We'll get that sorted out
separately.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: a64056bb5a ("drm/tests/drm_buddy: add alloc_contiguous test")
Link: https://lore.kernel.org/all/538327ff-8d34-41d5-a9ae-1a334744f5ae@roeck-us.net/
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
"struct bvec_iter" is defined with the __packed attribute, so it is
aligned on a single byte. On X86 (and on other architectures that support
unaligned addresses in hardware), "struct bvec_iter" is accessed using the
8-byte and 4-byte memory instructions, however these instructions are less
efficient if they operate on unaligned addresses.
(on RISC machines that don't have unaligned access in hardware, GCC
generates byte-by-byte accesses that are very inefficient - see [1])
This commit reorders the entries in "struct dm_verity_io" and "struct
convert_context", so that "struct bvec_iter" is aligned on 8 bytes.
[1] https://lore.kernel.org/all/ZcLuWUNRZadJr0tQ@fedora/T/
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
If a userspace process reads (with O_DIRECT) multiple blocks into the same
buffer, dm-crypt reports an authentication error [1]. The error is
reported in a log and it may cause RAID leg being kicked out of the
array.
This commit fixes dm-crypt, so that if integrity verification fails, the
data is read again into a kernel buffer (where userspace can't modify it)
and the integrity tag is rechecked. If the recheck succeeds, the content
of the kernel buffer is copied into the user buffer; if the recheck fails,
an integrity error is reported.
[1] https://people.redhat.com/~mpatocka/testcases/blk-auth-modify/read2.c
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
It was said that authenticated encryption could produce invalid tag when
the data that is being encrypted is modified [1]. So, fix this problem by
copying the data into the clone bio first and then encrypt them inside the
clone bio.
This may reduce performance, but it is needed to prevent the user from
corrupting the device by writing data with O_DIRECT and modifying them at
the same time.
[1] https://lore.kernel.org/all/20240207004723.GA35324@sol.localdomain/T/
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
If a userspace process reads (with O_DIRECT) multiple blocks into the same
buffer, dm-verity reports an error [1].
This commit fixes dm-verity, so that if hash verification fails, the data
is read again into a kernel buffer (where userspace can't modify it) and
the hash is rechecked. If the recheck succeeds, the content of the kernel
buffer is copied into the user buffer; if the recheck fails, an error is
reported.
[1] https://people.redhat.com/~mpatocka/testcases/blk-auth-modify/read2.c
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
If a userspace process reads (with O_DIRECT) multiple blocks into the same
buffer, dm-integrity reports an error [1]. The error is reported in a log
and it may cause RAID leg being kicked out of the array.
This commit fixes dm-integrity, so that if integrity verification fails,
the data is read again into a kernel buffer (where userspace can't modify
it) and the integrity tag is rechecked. If the recheck succeeds, the
content of the kernel buffer is copied into the user buffer; if the
recheck fails, an integrity error is reported.
[1] https://people.redhat.com/~mpatocka/testcases/blk-auth-modify/read2.c
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Do not allow to set phase adjust value for a pin if PF reset is in
progress, this would cause confusing netlink extack errors as the firmware
cannot process the request properly during the reset time.
Return (-EBUSY) and report extack error for the user who tries configure
pin phase adjust during the reset time.
Test by looping execution of below steps until netlink error appears:
- perform PF reset
$ echo 1 > /sys/class/net/<ice PF>/device/reset
- change pin phase adjust value:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \
--do pin-set --json '{"id":0, "phase-adjust":1000}'
Fixes: 90e1c90750 ("ice: dpll: implement phase related callbacks")
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Do not allow dpll periodic work function to acquire data from firmware
if PF reset is in progress. Acquiring data will cause dmesg errors as the
firmware cannot respond or process the request properly during the reset
time.
Test by looping execution of below step until dmesg error appears:
- perform PF reset
$ echo 1 > /sys/class/net/<ice PF>/device/reset
Fixes: d7999f5ea6 ("ice: implement dpll interface to control cgu")
Reviewed-by: Igor Bagnucki <igor.bagnucki@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Do not allow to acquire data or alter configuration of dpll and pins
through firmware if PF reset is in progress, this would cause confusing
netlink extack errors as the firmware cannot respond or process the
request properly during the reset time.
Return (-EBUSY) and extack error for the user who tries access/modify
the config of dpll/pin through firmware during the reset time.
The PF reset and kernel access to dpll data are both asynchronous. It is
not possible to guard all the possible reset paths with any determinictic
approach. I.e., it is possible that reset starts after reset check is
performed (or if the reset would be checked after mutex is locked), but at
the same time it is not possible to wait for dpll mutex unlock in the
reset flow.
This is best effort solution to at least give a clue to the user
what is happening in most of the cases, knowing that there are possible
race conditions where the user could see a different error received
from firmware due to reset unexpectedly starting.
Test by looping execution of below steps until netlink error appears:
- perform PF reset
$ echo 1 > /sys/class/net/<ice PF>/device/reset
- i.e. try to alter/read dpll/pin config:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \
--dump pin-get
Fixes: d7999f5ea6 ("ice: implement dpll interface to control cgu")
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The value of phase_adjust for input pin shall be updated in
ice_dpll_pin_state_update(..). Fix by adding proper argument to the
firmware query function call - a pin's struct field pointer where the
phase_adjust value during driver runtime is stored.
Previously the phase_adjust used to misinform user about actual
phase_adjust value. I.e., if phase_adjust was set to a non zero value and
if driver was reloaded, the user would see the value equal 0, which is
not correct - the actual value is equal to value set before driver reload.
Fixes: 90e1c90750 ("ice: dpll: implement phase related callbacks")
Reviewed-by: Alan Brady <alan.brady@intel.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fix the connection state between source DPLL and output pin, updating the
attribute 'state' of 'parent_device'. Previously, the connection state
was broken, and didn't reflect the correct state.
When 'state_on_dpll_set' is called with the value
'DPLL_PIN_STATE_CONNECTED' (1), the output pin will switch to the given
DPLL, and the state of the given DPLL will be set to connected.
E.g.:
--do pin-set --json '{"id":2, "parent-device":{"parent-id":1,
"state": 1 }}'
This command will connect DPLL device with id 1 to output pin with id 2.
When 'state_on_dpll_set' is called with the value
'DPLL_PIN_STATE_DISCONNECTED' (2) and the given DPLL is currently
connected, then the output pin will be disabled.
E.g:
--do pin-set --json '{"id":2, "parent-device":{"parent-id":1,
"state": 2 }}'
This command will disable output pin with id 2 if DPLL device with ID 1 is
connected to it; otherwise, the command is ignored.
Fixes: d7999f5ea6 ("ice: implement dpll interface to control cgu")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Yochai Hagvi <yochai.hagvi@intel.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
On some systems, sys_membarrier can be very expensive, causing overall
slowdowns for everything. So put a lock on the path in order to
serialize the accesses to prevent the ability for this to be called at
too high of a frequency and saturate the machine.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-and-tested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Borislav Petkov <bp@alien8.de>
Fixes: 22e4ebb975 ("membarrier: Provide expedited private command")
Fixes: c5f58bd58f ("membarrier: Provide GLOBAL_EXPEDITED command")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
i.MX fixes for 6.8:
- A tqma8mpql device tree fix to correct audio codec iov-supply.
- A couple of USB-C connector DT description revert to fix regression
on imx8mp-dhcom-pdk3 and imx8mn-var-som-symphony board.
- Fix valid range check for imx-weim bus driver.
- Disable UART4 on Data Modul i.MX8M Plus eDM SBC to avoid boot hang
in case that RDC protection is in place.
* tag 'imx-fixes-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
bus: imx-weim: fix valid range check
Revert "arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector"
Revert "arm64: dts: imx8mp-dhcom-pdk3: Describe the USB-C connector"
arm64: dts: tqma8mpql: fix audio codec iov-supply
arm64: dts: imx8mp: Disable UART4 by default on Data Modul i.MX8M Plus eDM SBC
Link: https://lore.kernel.org/r/20240206151744.2459-1-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Randomly a Lenovo Z13 will trigger a kernel warning traceback from this
condition:
```
if (WARN_ON((profile < 0) || (profile >= ARRAY_SIZE(profile_names))))
```
This happens because thinkpad-acpi always assumes that
convert_dytc_to_profile() successfully updated the profile. On the
contrary a condition can occur that when dytc_profile_refresh() is called
the profile doesn't get updated as there is a -EOPNOTSUPP branch.
Catch this situation and avoid updating the profile. Also log this into
dynamic debugging in case any other modes should be added in the future.
Fixes: c3bfcd4c67 ("platform/x86: thinkpad_acpi: Add platform profile support")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240217022311.113879-1-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
After commit b286f4e87e ("serial: core: Move tty and serdev to be
children of serial core port device") x86_instantiate_serdev() no longer
works due to the serdev-controller-device moving in the device hierarchy
from (e.g.) /sys/devices/pci0000:00/8086228A:00/serial0 to
/sys/devices/pci0000:00/8086228A:00/8086228A:00:0/8086228A:00:0.0/serial0
Use the new get_serdev_controller() helper function to fix this.
Fixes: b286f4e87e ("serial: core: Move tty and serdev to be children of serial core port device")
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240216201721.239791-4-hdegoede@redhat.com
In some cases UART attached devices which require an in kernel driver,
e.g. UART attached Bluetooth HCIs are described in the ACPI tables
by an ACPI device with a broken or missing UartSerialBusV2() resource.
This causes the kernel to create a /dev/ttyS# char-device for the UART
instead of creating an in kernel serdev-controller + serdev-device pair
for the in kernel driver.
The quirk handling in acpi_quirk_skip_serdev_enumeration() makes the kernel
create a serdev-controller device for these UARTs instead of a /dev/ttyS#.
Instantiating the actual serdev-device to bind to is up to pdx86 code,
so far this was handled by the x86-android-tablets code. But since
commit b286f4e87e ("serial: core: Move tty and serdev to be children of
serial core port device") the serdev-controller device has moved in the
device hierarchy from (e.g.) /sys/devices/pci0000:00/8086228A:00/serial0 to
/sys/devices/pci0000:00/8086228A:00/8086228A:00:0/8086228A:00:0.0/serial0 .
This makes this a bit trickier to do and another driver is in the works
which will also need this functionality.
Add a new helper to get the serdev-controller device, so that the new
code for this can be shared.
Fixes: b286f4e87e ("serial: core: Move tty and serdev to be children of serial core port device")
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240216201721.239791-3-hdegoede@redhat.com
After commit 4014ae236b ("platform/x86: x86-android-tablets: Stop using
gpiolib private APIs") the touchscreen in the keyboard half of
the Lenovo Yogabook1 X90 stopped working with the following error:
Goodix-TS i2c-goodix_ts: error -EBUSY: Failed to get irq GPIO
The problem is that when getting the IRQ for instantiated i2c_client-s
from a GPIO (rather then using an IRQ directly from the IOAPIC),
x86_acpi_irq_helper_get() now properly requests the GPIO, which disallows
other drivers from requesting it. Normally this is a good thing, but
the goodix touchscreen also uses the IRQ as an output during reset
to select which of its 2 possible I2C addresses should be used.
Add a new free_gpio flag to struct x86_acpi_irq_data to deal with this
and release the GPIO after getting the IRQ in this special case.
Fixes: 4014ae236b ("platform/x86: x86-android-tablets: Stop using gpiolib private APIs")
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240216201721.239791-2-hdegoede@redhat.com
The fields in SMCR_EL1 and SMPRI_EL1 reset to an architecturally UNKNOWN
value. Since we do not otherwise manage the traps configured in this
register at runtime we need to reconfigure them after a suspend in case
nothing else was kind enough to preserve them for us.
The vector length will be restored as part of restoring the SME state for
the next SME using task.
Fixes: a1f4ccd25c ("arm64/sme: Provide Kconfig for SME")
Reported-by: Jackson Cooper-Driver <Jackson.Cooper-Driver@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240213-arm64-sme-resume-v3-1-17e05e493471@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
This reverts commit f9daab0ad0.
Geert reports that his particular GCC 5.5 vintage toolchain fails to
build an arm64 defconfig because of this change:
| arch/arm64/include/asm/jump_label.h:25:2: error: invalid 'asm':
| invalid operand
| asm goto(
^
Aopparently, this is something we claim to support, so let's revert back
to the old jump label constraint for now while discussions about raising
the minimum GCC version are ongoing.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/CAMuHMdX+6fnAf8Hm6EqYJPAjrrLO9T7c=Gu3S8V_pqjSDowJ6g@mail.gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Similar to gpiochip_generic_request() and gpiochip_generic_free() the
gpiochip_generic_config() function needs to handle the case where there
are no pinctrl pins mapped to the GPIOs, usually through the gpio-ranges
device tree property.
Commit f34fd6ee1b ("gpio: dwapb: Use generic request, free and
set_config") set the .set_config callback to gpiochip_generic_config()
in the dwapb GPIO driver so the GPIO API can set pinctrl configuration
for the corresponding pins. Most boards using the dwapb driver do not
set the gpio-ranges device tree property though, and in this case
gpiochip_generic_config() would return -EPROPE_DEFER rather than the
previous -ENOTSUPP return value. This in turn makes
gpio_set_config_with_argument_optional() fail and propagate the error to
any driver requesting GPIOs.
Fixes: 2956b5d94a ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips")
Reported-by: Jisheng Zhang <jszhang@kernel.org>
Closes: https://lore.kernel.org/linux-gpio/ZdC_g3U4l0CJIWzh@xhacker/
Tested-by: Jisheng Zhang <jszhang@kernel.org>
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Currently, rebooting a pseries nested qemu-kvm guest (L2) results in
below error as L1 qemu sends PVR value 'arch_compat' == 0 via
ppc_set_compat ioctl. This triggers a condition failure in
kvmppc_set_arch_compat() resulting in an EINVAL.
qemu-system-ppc64: Unable to set CPU compatibility mode in KVM: Invalid
argument
Also, a value of 0 for arch_compat generally refers the default
compatibility of the host. But, arch_compat, being a Guest Wide Element
in nested API v2, cannot be set to 0 in GSB as PowerVM (L0) expects a
non-zero value. A value of 0 triggers a kernel trap during a reboot and
consequently causes it to fail:
[ 22.106360] reboot: Restarting system
KVM: unknown exit, hardware reason ffffffffffffffea
NIP 0000000000000100 LR 000000000000fe44 CTR 0000000000000000 XER 0000000020040092 CPU#0
MSR 0000000000001000 HID0 0000000000000000 HF 6c000000 iidx 3 didx 3
TB 00000000 00000000 DECR 0
GPR00 0000000000000000 0000000000000000 c000000002a8c300 000000007fe00000
GPR04 0000000000000000 0000000000000000 0000000000001002 8000000002803033
GPR08 000000000a000000 0000000000000000 0000000000000004 000000002fff0000
GPR12 0000000000000000 c000000002e10000 0000000105639200 0000000000000004
GPR16 0000000000000000 000000010563a090 0000000000000000 0000000000000000
GPR20 0000000105639e20 00000001056399c8 00007fffe54abab0 0000000105639288
GPR24 0000000000000000 0000000000000001 0000000000000001 0000000000000000
GPR28 0000000000000000 0000000000000000 c000000002b30840 0000000000000000
CR 00000000 [ - - - - - - - - ] RES 000@ffffffffffffffff
SRR0 0000000000000000 SRR1 0000000000000000 PVR 0000000000800200 VRSAVE 0000000000000000
SPRG0 0000000000000000 SPRG1 0000000000000000 SPRG2 0000000000000000 SPRG3 0000000000000000
SPRG4 0000000000000000 SPRG5 0000000000000000 SPRG6 0000000000000000 SPRG7 0000000000000000
HSRR0 0000000000000000 HSRR1 0000000000000000
CFAR 0000000000000000
LPCR 0000000000020400
PTCR 0000000000000000 DAR 0000000000000000 DSISR 0000000000000000
kernel:trap=0xffffffea | pc=0x100 | msr=0x1000
This patch updates kvmppc_set_arch_compat() to use the host PVR value if
'compat_pvr' == 0 indicating that qemu doesn't want to enforce any
specific PVR compat mode.
The relevant part of the code might need a rework if PowerVM implements
a support for `arch_compat == 0` in nestedv2 API.
Fixes: 19d31c5f11 ("KVM: PPC: Add support for nestedv2 guests")
Reviewed-by: "Aneesh Kumar K.V (IBM)" <aneesh.kumar@kernel.org>
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Amit Machhiwal <amachhiw@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240207054526.3720087-1-amachhiw@linux.ibm.com
Since the merge of b717dfbf73 ("Revert "usb: typec: tcpm: fix
cc role at port reset"") into mainline the LibreTech Renegade
Elite/Firefly has died during boot, the main symptom observed in testing
is a sudden stop in console output. Gábor Stefanik identified in review
that the patch would cause power to be removed from devices without
batteries (like this board), observing that while the patch is correct
according to the spec this appears to be an oversight in the spec.
Given that the change makes previously working systems unusable let's
revert it, there was some discussion of identifying systems that have
alternative power and implementing the standards conforming behaviour in
only that case.
Fixes: b717dfbf73 ("Revert "usb: typec: tcpm: fix cc role at port reset"")
Cc: stable <stable@kernel.org>
Cc: Badhri Jagan Sridharan <badhri@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20240212-usb-fix-renegade-v1-1-22c43c88d635@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
if you have a variable that holds NULL or a pointer to live struct mount,
do not shove ERR_PTR() into it - not if you later treat "not NULL" as
"holds a pointer to object".
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
During VMentry VERW is executed to mitigate MDS. After VERW, any memory
access like register push onto stack may put host data in MDS affected
CPU buffers. A guest can then use MDS to sample host data.
Although likelihood of secrets surviving in registers at current VERW
callsite is less, but it can't be ruled out. Harden the MDS mitigation
by moving the VERW mitigation late in VMentry path.
Note that VERW for MMIO Stale Data mitigation is unchanged because of
the complexity of per-guest conditional VERW which is not easy to handle
that late in asm with no GPRs available. If the CPU is also affected by
MDS, VERW is unconditionally executed late in asm regardless of guest
having MMIO access.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/all/20240213-delay-verw-v8-6-a6216d83edb7%40linux.intel.com
The VERW mitigation at exit-to-user is enabled via a static branch
mds_user_clear. This static branch is never toggled after boot, and can
be safely replaced with an ALTERNATIVE() which is convenient to use in
asm.
Switch to ALTERNATIVE() to use the VERW mitigation late in exit-to-user
path. Also remove the now redundant VERW in exc_nmi() and
arch_exit_to_user_mode().
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240213-delay-verw-v8-4-a6216d83edb7%40linux.intel.com
Mitigation for MDS is to use VERW instruction to clear any secrets in
CPU Buffers. Any memory accesses after VERW execution can still remain
in CPU buffers. It is safer to execute VERW late in return to user path
to minimize the window in which kernel data can end up in CPU buffers.
There are not many kernel secrets to be had after SWITCH_TO_USER_CR3.
Add support for deploying VERW mitigation after user register state is
restored. This helps minimize the chances of kernel data ending up into
CPU buffers after executing VERW.
Note that the mitigation at the new location is not yet enabled.
Corner case not handled
=======================
Interrupts returning to kernel don't clear CPUs buffers since the
exit-to-user path is expected to do that anyways. But, there could be
a case when an NMI is generated in kernel after the exit-to-user path
has cleared the buffers. This case is not handled and NMI returning to
kernel don't clear CPU buffers because:
1. It is rare to get an NMI after VERW, but before returning to userspace.
2. For an unprivileged user, there is no known way to make that NMI
less rare or target it.
3. It would take a large number of these precisely-timed NMIs to mount
an actual attack. There's presumably not enough bandwidth.
4. The NMI in question occurs after a VERW, i.e. when user state is
restored and most interesting data is already scrubbed. Whats left
is only the data that NMI touches, and that may or may not be of
any interest.
Suggested-by: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240213-delay-verw-v8-2-a6216d83edb7%40linux.intel.com
MDS mitigation requires clearing the CPU buffers before returning to
user. This needs to be done late in the exit-to-user path. Current
location of VERW leaves a possibility of kernel data ending up in CPU
buffers for memory accesses done after VERW such as:
1. Kernel data accessed by an NMI between VERW and return-to-user can
remain in CPU buffers since NMI returning to kernel does not
execute VERW to clear CPU buffers.
2. Alyssa reported that after VERW is executed,
CONFIG_GCC_PLUGIN_STACKLEAK=y scrubs the stack used by a system
call. Memory accesses during stack scrubbing can move kernel stack
contents into CPU buffers.
3. When caller saved registers are restored after a return from
function executing VERW, the kernel stack accesses can remain in
CPU buffers(since they occur after VERW).
To fix this VERW needs to be moved very late in exit-to-user path.
In preparation for moving VERW to entry/exit asm code, create macros
that can be used in asm. Also make VERW patching depend on a new feature
flag X86_FEATURE_CLEAR_CPU_BUF.
Reported-by: Alyssa Milburn <alyssa.milburn@intel.com>
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/20240213-delay-verw-v8-1-a6216d83edb7%40linux.intel.com
Debugging shows a large number of unaligned access traps in the unwinder
code. Code analysis reveals a number of issues with this code:
- handle_interruption is passed twice through
dereference_kernel_function_descriptor()
- ret_from_kernel_thread, syscall_exit, intr_return,
_switch_to_ret, and _call_on_stack are passed through
dereference_kernel_function_descriptor() even though they are
not declared as function pointers.
To fix the problems, drop one of the calls to
dereference_kernel_function_descriptor() for handle_interruption,
and compare the other pointers directly.
Fixes: 6414b30b39 ("parisc: unwind: Avoid missing prototype warning for handle_interruption()")
Fixes: 8e0ba125c2 ("parisc/unwind: fix unwinder when CONFIG_64BIT is enabled")
Cc: Helge Deller <deller@gmx.de>
Cc: Sven Schnelle <svens@stackframe.org>
Cc: John David Anglin <dave.anglin@bell.net>
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Helge Deller <deller@gmx.de>
On my EliteBook 840 G8 Notebook PC (ProdId 5S7R6EC#ABD; built 2022 for
german market) the Mute LED is always on. The mute button itself works
as expected. alsa-info.sh shows a different subsystem-id 0x8ab9 for
Realtek ALC285 Codec, thus the existing quirks for HP 840 G8 don't work.
Therefore, add a new quirk for this type of EliteBook.
Signed-off-by: Hans Peter <flurry123@gmx.ch>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240219164518.4099-1-flurry123@gmx.ch
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The driver must write 0 to HALO_STATE before sending the SYSTEM_RESET
command to the firmware.
HALO_STATE is in DSP memory, which is preserved across a soft reset.
The SYSTEM_RESET command does not change the value of HALO_STATE.
There is period of time while the CS35L56 is resetting, before the
firmware has started to boot, where a read of HALO_STATE will return
the value it had before the SYSTEM_RESET. If the driver does not
clear HALO_STATE, this would return BOOT_DONE status even though the
firmware has not booted.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 8a731fd37f ("ASoC: cs35l56: Move utility functions to shared file")
Link: https://msgid.link/r/20240216140535.1434933-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
While calculating the hardware interrupt number for a MSI interrupt, the
higher bits (i.e. from bit-5 onwards a.k.a domain_nr >= 32) of the PCI
domain number gets truncated because of the shifted value casting to return
type of pci_domain_nr() which is 'int'. This for example is resulting in
same hardware interrupt number for devices 0019:00:00.0 and 0039:00:00.0.
To address this cast the PCI domain number to 'irq_hw_number_t' before left
shifting it to calculate the hardware interrupt number.
Please note that this fixes the issue only on 64-bit systems and doesn't
change the behavior for 32-bit systems i.e. the 32-bit systems continue to
have the issue. Since the issue surfaces only if there are too many PCIe
controllers in the system which usually is the case in modern server
systems and they don't tend to run 32-bit kernels.
Fixes: 3878eaefb8 ("PCI/MSI: Enhance core to support hierarchy irqdomain")
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Shanker Donthineni <sdonthineni@nvidia.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240115135649.708536-1-vidyas@nvidia.com
RISC-V PLIC cannot "end-of-interrupt" (EOI) disabled interrupts, as
explained in the description of Interrupt Completion in the PLIC spec:
"The PLIC signals it has completed executing an interrupt handler by
writing the interrupt ID it received from the claim to the claim/complete
register. The PLIC does not check whether the completion ID is the same
as the last claim ID for that target. If the completion ID does not match
an interrupt source that *is currently enabled* for the target, the
completion is silently ignored."
Commit 69ea463021 ("irqchip/sifive-plic: Fixup EOI failed when masked")
ensured that EOI is successful by enabling interrupt first, before EOI.
Commit a1706a1c50 ("irqchip/sifive-plic: Separate the enable and mask
operations") removed the interrupt enabling code from the previous
commit, because it assumes that interrupt should already be enabled at the
point of EOI.
However, this is incorrect: there is a window after a hart claiming an
interrupt and before irq_desc->lock getting acquired, interrupt can be
disabled during this window. Thus, EOI can be invoked while the interrupt
is disabled, effectively nullify this EOI. This results in the interrupt
never gets asserted again, and the device who uses this interrupt appears
frozen.
Make sure that interrupt is really enabled before EOI.
Fixes: a1706a1c50 ("irqchip/sifive-plic: Separate the enable and mask operations")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: linux-riscv@lists.infradead.org
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240131081933.144512-1-namcao@linutronix.de
amd_pmf_init_smart_pc() calls out to amd_pmf_get_bios_buffer() but
the error handling flow doesn't clean everything up allocated
memory.
As amd_pmf_get_bios_buffer() is only called by amd_pmf_init_smart_pc(),
fold it into the function and add labels to clean up any step that
can fail along the way. Explicitly set everything allocated to NULL as
there are other features that may access some of the same variables.
Fixes: 7c45534afa ("platform/x86/amd/pmf: Add support for PMF Policy Binary")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240217014107.113749-3-mario.limonciello@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
TEE enact command failures are seen after each suspend/resume cycle;
fix this by cancelling the policy builder workqueue before going into
suspend and reschedule the workqueue after resume.
[ 629.516792] ccp 0000:c2:00.2: tee: command 0x5 timed out, disabling PSP
[ 629.516835] amd-pmf AMDI0102:00: TEE enact cmd failed. err: ffff000e, ret:0
[ 630.550464] amd-pmf AMDI0102:00: AMD_PMF_REGISTER_RESPONSE:1
[ 630.550511] amd-pmf AMDI0102:00: AMD_PMF_REGISTER_ARGUMENT:7
[ 630.550548] amd-pmf AMDI0102:00: AMD_PMF_REGISTER_MESSAGE:16
Fixes: ae82cef7d9 ("platform/x86/amd/pmf: Add support for PMF-TA interaction")
Co-developed-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20240216064112.962582-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On some devices the ACPI name of the touchscreen is e.g. either
MSSL1680:00 or MSSL1680:01 depending on the BIOS version.
This happens for example on the "Chuwi Hi8 Air" tablet where the initial
commit's ts_data uses "MSSL1680:00" but the tablets from the github issue
and linux-hardware.org probe linked below both use "MSSL1680:01".
Replace the strcmp() match on ts_data->acpi_name with a strstarts()
check to allow using a partial match on just the ACPI HID of "MSSL1680"
and change the ts_data->acpi_name for the "Chuwi Hi8 Air" accordingly
to fix the touchscreen not working on models where it is "MSSL1680:01".
Note this drops the length check for I2C_NAME_SIZE. This never was
necessary since the ACPI names used are never more then 11 chars and
I2C_NAME_SIZE is 20 so the replaced strncmp() would always stop long
before reaching I2C_NAME_SIZE.
Link: https://linux-hardware.org/?computer=AC4301C0542A
Fixes: bbb97d728f ("platform/x86: touchscreen_dmi: Add info for the Chuwi Hi8 Air tablet")
Closes: https://github.com/onitake/gsl-firmware/issues/91
Cc: stable@vger.kernel.org
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240212120608.30469-1-hdegoede@redhat.com
Since commit 7a36b901a6 ("ACPI: OSL: Use a threaded interrupt handler
for SCI") the ACPI OSL code passes IRQF_ONESHOT when requesting the SCI.
Since the INT0002 GPIO is typically shared with the ACPI SCI the INT0002
driver must pass the same flags.
This fixes the INT0002 driver failing to probe due to following error +
as well as removing the backtrace that follows this error:
"genirq: Flags mismatch irq 9. 00000084 (INT0002) vs. 00002080 (acpi)"
Fixes: 7a36b901a6 ("ACPI: OSL: Use a threaded interrupt handler for SCI")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240210110149.12803-1-hdegoede@redhat.com
Incorporate a test case to assess the handling of invalid flags or
task__nullable parameters passed to bpf_iter_task_new(). Prior to the
preceding commit, this scenario could potentially trigger a kernel panic.
However, with the previous commit, this test case is expected to function
correctly.
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240217114152.1623-3-laoar.shao@gmail.com
Failure to initialize it->pos, coupled with the presence of an invalid
value in the flags variable, can lead to it->pos referencing an invalid
task, potentially resulting in a kernel panic. To mitigate this risk, it's
crucial to ensure proper initialization of it->pos to NULL.
Fixes: ac8148d957 ("bpf: bpf_iter_task_next: use next_task(kit->task) rather than next_task(kit->pos)")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/bpf/20240217114152.1623-2-laoar.shao@gmail.com
This selftest is based on a Alexei's test adopted from an internal
user to troubleshoot another bug. During this exercise, a separate
racing bug was discovered between bpf_timer_cancel_and_free
and bpf_timer_cancel. The details can be found in the previous
patch.
This patch is to add a selftest that can trigger the bug.
I can trigger the UAF everytime in my qemu setup with KASAN. The idea
is to have multiple user space threads running in a tight loop to exercise
both bpf_map_update_elem (which calls into bpf_timer_cancel_and_free)
and bpf_timer_cancel.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20240215211218.990808-2-martin.lau@linux.dev
The following race is possible between bpf_timer_cancel_and_free
and bpf_timer_cancel. It will lead a UAF on the timer->timer.
bpf_timer_cancel();
spin_lock();
t = timer->time;
spin_unlock();
bpf_timer_cancel_and_free();
spin_lock();
t = timer->timer;
timer->timer = NULL;
spin_unlock();
hrtimer_cancel(&t->timer);
kfree(t);
/* UAF on t */
hrtimer_cancel(&t->timer);
In bpf_timer_cancel_and_free, this patch frees the timer->timer
after a rcu grace period. This requires a rcu_head addition
to the "struct bpf_hrtimer". Another kfree(t) happens in bpf_timer_init,
this does not need a kfree_rcu because it is still under the
spin_lock and timer->timer has not been visible by others yet.
In bpf_timer_cancel, rcu_read_lock() is added because this helper
can be used in a non rcu critical section context (e.g. from
a sleepable bpf prog). Other timer->timer usages in helpers.c
have been audited, bpf_timer_cancel() is the only place where
timer->timer is used outside of the spin_lock.
Another solution considered is to mark a t->flag in bpf_timer_cancel
and clear it after hrtimer_cancel() is done. In bpf_timer_cancel_and_free,
it busy waits for the flag to be cleared before kfree(t). This patch
goes with a straight forward solution and frees timer->timer after
a rcu grace period.
Fixes: b00628b1c7 ("bpf: Introduce bpf timers.")
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20240215211218.990808-1-martin.lau@linux.dev
FORTIFY_SOURCE has been ignoring 0-sized destinations while the kernel
code base has been converted to flexible arrays. In order to enforce
the 0-sized destinations (e.g. with __counted_by), the remaining 0-sized
destinations need to be handled. Unfortunately, struct vic_provinfo
resists full conversion, as it contains a flexible array of flexible
arrays, which is only possible with the 0-sized fake flexible array.
Use unsafe_memcpy() to avoid future false positives under
CONFIG_FORTIFY_SOURCE.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since there is a utility available for this, use
the API rather than open code.
Fixes: 13943d6c82 ("ionic: prevent pci disable of already disabled device")
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While working on the patchset to remove extent locking I got a lockdep
splat with fiemap and pagefaulting with my new extent lock replacement
lock.
This deadlock exists with our normal code, we just don't have lockdep
annotations with the extent locking so we've never noticed it.
Since we're copying the fiemap extent to user space on every iteration
we have the chance of pagefaulting. Because we hold the extent lock for
the entire range we could mkwrite into a range in the file that we have
mmap'ed. This would deadlock with the following stack trace
[<0>] lock_extent+0x28d/0x2f0
[<0>] btrfs_page_mkwrite+0x273/0x8a0
[<0>] do_page_mkwrite+0x50/0xb0
[<0>] do_fault+0xc1/0x7b0
[<0>] __handle_mm_fault+0x2fa/0x460
[<0>] handle_mm_fault+0xa4/0x330
[<0>] do_user_addr_fault+0x1f4/0x800
[<0>] exc_page_fault+0x7c/0x1e0
[<0>] asm_exc_page_fault+0x26/0x30
[<0>] rep_movs_alternative+0x33/0x70
[<0>] _copy_to_user+0x49/0x70
[<0>] fiemap_fill_next_extent+0xc8/0x120
[<0>] emit_fiemap_extent+0x4d/0xa0
[<0>] extent_fiemap+0x7f8/0xad0
[<0>] btrfs_fiemap+0x49/0x80
[<0>] __x64_sys_ioctl+0x3e1/0xb50
[<0>] do_syscall_64+0x94/0x1a0
[<0>] entry_SYSCALL_64_after_hwframe+0x6e/0x76
I wrote an fstest to reproduce this deadlock without my replacement lock
and verified that the deadlock exists with our existing locking.
To fix this simply don't take the extent lock for the entire duration of
the fiemap. This is safe in general because we keep track of where we
are when we're searching the tree, so if an ordered extent updates in
the middle of our fiemap call we'll still emit the correct extents
because we know what offset we were on before.
The only place we maintain the lock is searching delalloc. Since the
delalloc stuff can change during writeback we want to lock the extent
range so we have a consistent view of delalloc at the time we're
checking to see if we need to set the delalloc flag.
With this patch applied we no longer deadlock with my testcase.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
With the following file extent layout, defrag would do unnecessary IO
and result more on-disk space usage.
# mkfs.btrfs -f $dev
# mount $dev $mnt
# xfs_io -f -c "pwrite 0 40m" $mnt/foobar
# sync
# xfs_io -f -c "pwrite 40m 16k" $mnt/foobar
# sync
Above command would lead to the following file extent layout:
item 6 key (257 EXTENT_DATA 0) itemoff 15816 itemsize 53
generation 7 type 1 (regular)
extent data disk byte 298844160 nr 41943040
extent data offset 0 nr 41943040 ram 41943040
extent compression 0 (none)
item 7 key (257 EXTENT_DATA 41943040) itemoff 15763 itemsize 53
generation 8 type 1 (regular)
extent data disk byte 13631488 nr 16384
extent data offset 0 nr 16384 ram 16384
extent compression 0 (none)
Which is mostly fine. We can allow the final 16K to be merged with the
previous 40M, but it's upon the end users' preference.
But if we defrag the file using the default parameters, it would result
worse file layout:
# btrfs filesystem defrag $mnt/foobar
# sync
item 6 key (257 EXTENT_DATA 0) itemoff 15816 itemsize 53
generation 7 type 1 (regular)
extent data disk byte 298844160 nr 41943040
extent data offset 0 nr 8650752 ram 41943040
extent compression 0 (none)
item 7 key (257 EXTENT_DATA 8650752) itemoff 15763 itemsize 53
generation 9 type 1 (regular)
extent data disk byte 340787200 nr 33292288
extent data offset 0 nr 33292288 ram 33292288
extent compression 0 (none)
item 8 key (257 EXTENT_DATA 41943040) itemoff 15710 itemsize 53
generation 8 type 1 (regular)
extent data disk byte 13631488 nr 16384
extent data offset 0 nr 16384 ram 16384
extent compression 0 (none)
Note the original 40M extent is still there, but a new 32M extent is
created for no benefit at all.
[CAUSE]
There is an existing check to make sure we won't defrag a large enough
extent (the threshold is by default 32M).
But the check is using the length to the end of the extent:
range_len = em->len - (cur - em->start);
/* Skip too large extent */
if (range_len >= extent_thresh)
goto next;
This means, for the first 8MiB of the extent, the range_len is always
smaller than the default threshold, and would not be defragged.
But after the first 8MiB, the remaining part would fit the requirement,
and be defragged.
Such different behavior inside the same extent caused the above problem,
and we should avoid different defrag decision inside the same extent.
[FIX]
Instead of using @range_len, just use @em->len, so that we have a
consistent decision among the same file extent.
Now with this fix, we won't touch the extent, thus not making it any
worse.
Reported-by: Filipe Manana <fdmanana@suse.com>
Fixes: 0cb5950f3f ("btrfs: fix deadlock when reserving space during defrag")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Boris Burkov <boris@bur.io>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Platform clock and phy error resources are not cleaned up in Xilinx GT PHY
error path.
To fix introduce the function ceva_ahci_platform_enable_resources() which
is a customized version of ahci_platform_enable_resources() and inline with
SATA IP programming sequence it does:
- Assert SATA reset
- Program PS GTR phy
- Bring SATA by de-asserting the reset
- Wait for GT lane PLL to be locked
ceva_ahci_platform_enable_resources() is also used in the resume path
as the same SATA programming sequence (as in probe) should be followed.
Also cleanup the mixed usage of ahci_platform_enable_resources() and custom
implementation in the probe function as both are not required.
Fixes: 9a9d3abe24 ("ata: ahci: ceva: Update the driver to support xilinx GT phy")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The ASM1064 SATA host controller always reports wrongly,
that it has 24 ports. But in reality, it only has four ports.
before:
ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xffff0f impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst
after:
ahci 0000:04:00.0: ASM1064 has only four ports
ahci 0000:04:00.0: forcing port_map 0xffff0f -> 0xf
ahci 0000:04:00.0: SSS flag set, parallel bus scan disabled
ahci 0000:04:00.0: AHCI 0001.0301 32 slots 24 ports 6 Gbps 0xf impl SATA mode
ahci 0000:04:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst
Signed-off-by: "Andrey Jr. Melnikov" <temnota.am@gmail.com>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
In bond priority testing, we set the primary interface to eth1 and add
eth0,1,2 to bond in serial. This is OK in normal times. But when in
debug kernel, the bridge port that eth0,1,2 connected would start
slowly (enter blocking, forwarding state), which caused the primary
interface down for a while after enslaving and active slave changed.
Here is a test log from Jakub's debug test[1].
[ 400.399070][ T50] br0: port 1(s0) entered disabled state
[ 400.400168][ T50] br0: port 4(s2) entered disabled state
[ 400.941504][ T2791] bond0: (slave eth0): making interface the new active one
[ 400.942603][ T2791] bond0: (slave eth0): Enslaving as an active interface with an up link
[ 400.943633][ T2766] br0: port 1(s0) entered blocking state
[ 400.944119][ T2766] br0: port 1(s0) entered forwarding state
[ 401.128792][ T2792] bond0: (slave eth1): making interface the new active one
[ 401.130771][ T2792] bond0: (slave eth1): Enslaving as an active interface with an up link
[ 401.131643][ T69] br0: port 2(s1) entered blocking state
[ 401.132067][ T69] br0: port 2(s1) entered forwarding state
[ 401.346201][ T2793] bond0: (slave eth2): Enslaving as a backup interface with an up link
[ 401.348414][ T50] br0: port 4(s2) entered blocking state
[ 401.348857][ T50] br0: port 4(s2) entered forwarding state
[ 401.519669][ T250] bond0: (slave eth0): link status definitely down, disabling slave
[ 401.526522][ T250] bond0: (slave eth1): link status definitely down, disabling slave
[ 401.526986][ T250] bond0: (slave eth2): making interface the new active one
[ 401.629470][ T250] bond0: (slave eth0): link status definitely up
[ 401.630089][ T250] bond0: (slave eth1): link status definitely up
[...]
# TEST: prio (active-backup ns_ip6_target primary_reselect 1) [FAIL]
# Current active slave is eth2 but not eth1
Fix it by setting active slave to primary slave specifically before
testing.
[1] https://netdev-3.bots.linux.dev/vmksft-bonding-dbg/results/464301/1-bond-options-sh/stdout
Fixes: 481b56e039 ("selftests: bonding: re-format bond option tests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before commit 07c30ea586 ("serial: Do not hold the port lock when setting
rx-during-tx GPIO") the SER_RS485_RX_DURING_TX flag was only set if the
rx-during-tx mode was not controlled by a GPIO. Now the flag is set
unconditionally when RS485 is enabled. This results in an incorrect setting
if the rx-during-tx GPIO is not asserted.
Fix this by setting the flag only if the rx-during-tx mode is not
controlled by a GPIO and thus restore the correct behaviour.
Cc: stable@vger.kernel.org # 6.6+
Fixes: 07c30ea586 ("serial: Do not hold the port lock when setting rx-during-tx GPIO")
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Link: https://lore.kernel.org/r/20240216224709.9928-1-l.sanfilippo@kunbus.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It is observed sometimes when tethering is used over NCM with Windows 11
as host, at some instances, the gadget_giveback has one byte appended at
the end of a proper NTB. When the NTB is parsed, unwrap call looks for
any leftover bytes in SKB provided by u_ether and if there are any pending
bytes, it treats them as a separate NTB and parses it. But in case the
second NTB (as per unwrap call) is faulty/corrupt, all the datagrams that
were parsed properly in the first NTB and saved in rx_list are dropped.
Adding a few custom traces showed the following:
[002] d..1 7828.532866: dwc3_gadget_giveback: ep1out:
req 000000003868811a length 1025/16384 zsI ==> 0
[002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb toprocess: 1025
[002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342
[002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb seq: 0xce67
[002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x400
[002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb ndp_len: 0x10
[002] d..1 7828.532869: ncm_unwrap_ntb: K: Parsed NTB with 1 frames
In this case, the giveback is of 1025 bytes and block length is 1024.
The rest 1 byte (which is 0x00) won't be parsed resulting in drop of
all datagrams in rx_list.
Same is case with packets of size 2048:
[002] d..1 7828.557948: dwc3_gadget_giveback: ep1out:
req 0000000011dfd96e length 2049/16384 zsI ==> 0
[002] d..1 7828.557949: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342
[002] d..1 7828.557950: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x800
Lecroy shows one byte coming in extra confirming that the byte is coming
in from PC:
Transfer 2959 - Bytes Transferred(1025) Timestamp((18.524 843 590)
- Transaction 8391 - Data(1025 bytes) Timestamp(18.524 843 590)
--- Packet 4063861
Data(1024 bytes)
Duration(2.117us) Idle(14.700ns) Timestamp(18.524 843 590)
--- Packet 4063863
Data(1 byte)
Duration(66.160ns) Time(282.000ns) Timestamp(18.524 845 722)
According to Windows driver, no ZLP is needed if wBlockLength is non-zero,
because the non-zero wBlockLength has already told the function side the
size of transfer to be expected. However, there are in-market NCM devices
that rely on ZLP as long as the wBlockLength is multiple of wMaxPacketSize.
To deal with such devices, it pads an extra 0 at end so the transfer is no
longer multiple of wMaxPacketSize.
Cc: <stable@vger.kernel.org>
Fixes: 9f6ce4240a ("usb: gadget: f_ncm.c added")
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20240205074650.200304-1-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The reverted commit makes the state machine only ever go from SRC_ATTACH_WAIT
to SNK_TRY in endless loop when toggling. After revert it goes to SRC_ATTACHED
after initially trying SNK_TRY earlier, as it should for toggling to ever detect
the power source mode and the port is again able to provide power to attached
power sinks.
This reverts commit 2d6d801270.
Cc: stable@vger.kernel.org
Fixes: 2d6d801270 ("usb: typec: tcpm: reset counter when enter into unattached state after try role")
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Link: https://lore.kernel.org/r/20240217162023.1719738-1-megi@xff.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
829 if (request->complete) {
830 spin_unlock(&priv_dev->lock);
831 usb_gadget_giveback_request(&priv_ep->endpoint,
832 request);
833 spin_lock(&priv_dev->lock);
834 }
835
836 if (request->buf == priv_dev->zlp_buf)
837 cdns3_gadget_ep_free_request(&priv_ep->endpoint, request);
Driver append an additional zero packet request when queue a packet, which
length mod max packet size is 0. When transfer complete, run to line 831,
usb_gadget_giveback_request() will free this requestion. 836 condition is
true, so cdns3_gadget_ep_free_request() free this request again.
Log:
[ 1920.140696][ T150] BUG: KFENCE: use-after-free read in cdns3_gadget_giveback+0x134/0x2c0 [cdns3]
[ 1920.140696][ T150]
[ 1920.151837][ T150] Use-after-free read at 0x000000003d1cd10b (in kfence-#36):
[ 1920.159082][ T150] cdns3_gadget_giveback+0x134/0x2c0 [cdns3]
[ 1920.164988][ T150] cdns3_transfer_completed+0x438/0x5f8 [cdns3]
Add check at line 829, skip call usb_gadget_giveback_request() if it is
additional zero length packet request. Needn't call
usb_gadget_giveback_request() because it is allocated in this driver.
Cc: stable@vger.kernel.org
Fixes: 7733f6c32e ("usb: cdns3: Add Cadence USB3 DRD Driver")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20240202154217.661867-2-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In current design, usb role class driver will get usb_role_switch parent's
module reference after the user get usb_role_switch device and put the
reference after the user put the usb_role_switch device. However, the
parent device of usb_role_switch may be removed before the user put the
usb_role_switch. If so, then, NULL pointer issue will be met when the user
put the parent module's reference.
This will save the module pointer in structure of usb_role_switch. Then,
we don't need to find module by iterating long relations.
Fixes: 5c54fcac9a ("usb: roles: Take care of driver module reference counting")
cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240129093739.2371530-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
host.c file has some parts of code that were introduced for CDNS3 driver
and should not be used with CDNSP driver.
This patch blocks using these parts of codes by CDNSP driver.
These elements include:
- xhci_plat_cdns3_xhci object
- cdns3 specific XECP_PORT_CAP_REG register
- cdns3 specific XECP_AUX_CTRL_REG1 register
cc: stable@vger.kernel.org
Fixes: 3d82904559 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Link: https://lore.kernel.org/r/20240206104018.48272-1-pawell@cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The local helper function to compare the given pair of cycle count
evaluates them. If the left value is less than the right value, the
function returns negative value.
If the safe cycle is less than the current cycle, it is the case of
cycle lost. However, it is not currently handled properly.
This commit fixes the bug.
Cc: <stable@vger.kernel.org>
Fixes: 705794c53b ("ALSA: firewire-lib: check cycle continuity")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20240218033026.72577-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This fixes relying upon linux/of_platform.h to include
linux/platform_device.h, which it no longer does, thereby fixing
compilation problems like:
In file included from drivers/usb/host/uhci-hcd.c:850:
drivers/usb/host/uhci-grlib.c: In function 'uhci_hcd_grlib_probe':
drivers/usb/host/uhci-grlib.c:92:29: error: invalid use of undefined type 'struct platform_device'
92 | struct device_node *dn = op->dev.of_node;
| ^~
Fixes: ef175b29a2 ("of: Stop circularly including of_device.h and of_platform.h")
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Link: https://lore.kernel.org/r/20240129075056.1511630-1-andreas@gaisler.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull Kbuild fixes from Masahiro Yamada:
- Reformat nested if-conditionals in Makefiles with 4 spaces
- Fix CONFIG_DEBUG_INFO_BTF builds for big endian
- Fix modpost for module srcversion
- Fix an escape sequence warning in gen_compile_commands.py
- Fix kallsyms to ignore ARMv4 thunk symbols
* tag 'kbuild-fixes-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kallsyms: ignore ARMv4 thunks along with others
modpost: trim leading spaces when processing source files list
gen_compile_commands: fix invalid escape sequence warning
kbuild: Fix changing ELF file type for output of gen_btf for big endian
docs: kconfig: Fix grammar and formatting
kbuild: use 4-space indentation when followed by conditionals
Pull x86 fix from Borislav Petkov:
- Use a GB page for identity mapping only when memory of this size is
requested so that mapping of reserved regions is prevented which
would otherwise lead to system crashes on UV machines
* tag 'x86_urgent_for_v6.8_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/ident_map: Use gbpages only where full GB page should be mapped.
Pull irq fixes from Borislav Petkov:
- Fix GICv4.1 affinity update
- Restore a quirk for ACPI-based GICv4 systems
- Handle non-coherent GICv4 redistributors properly
- Prevent spurious interrupts on Broadcom devices using GIC v3
architecture
- Other minor fixes
* tag 'irq_urgent_for_v6.8_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Fix GICv4.1 VPE affinity update
irqchip/gic-v3-its: Restore quirk probing for ACPI-based systems
irqchip/gic-v3-its: Handle non-coherent GICv4 redistributors
irqchip/qcom-mpm: Fix IS_ERR() vs NULL check in qcom_mpm_init()
irqchip/loongson-eiointc: Use correct struct type in eiointc_domain_alloc()
irqchip/irq-brcmstb-l2: Add write memory barrier before exit
Pull i2c fixes from Wolfram Sang:
"Two fixes for i801 and qcom-geni devices. Meanwhile, a fix from Arnd
addresses a compilation error encountered during compile test on
powerpc"
* tag 'i2c-for-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: i801: Fix block process call transactions
i2c: pasemi: split driver into two separate modules
i2c: qcom-geni: Correct I2C TRE sequence
Justin Chen says:
====================
net: bcmasp: bug fixes for bcmasp
Fix two bugs.
- Indicate that PM is managed by mac to prevent double pm calls. This
doesn't lead to a crash, but waste a noticable amount of time
suspending/resuming.
- Sanity check for OOB write was off by one. Leading to a false error
when using the full array.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
A sanity check for OOB write is off by one leading to a false positive
when the array is full.
Fixes: 9b90aca97f ("net: ethernet: bcmasp: fix possible OOB write in bcmasp_netfilt_get_all_active()")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Avoid the PHY library call unnecessarily into the suspend/resume
functions by setting phydev->mac_managed_pm to true. The ASP driver
essentially does exactly what mdio_bus_phy_resume() does.
Fixes: 490cb41200 ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthieu Baerts says:
====================
mptcp: misc. fixes for v6.8
This series includes 4 types of fixes:
Patches 1 and 2 force the path-managers not to allocate a new address
entry when dealing with the "special" ID 0, reserved to the address of
the initial subflow. These patches can be backported up to v5.19 and
v5.12 respectively.
Patch 3 to 6 fix the in-kernel path-manager not to create duplicated
subflows. Patch 6 is the main fix, but patches 3 to 5 are some kind of
pre-requisities: they fix some data races that could also lead to the
creation of unexpected subflows. These patches can be backported up to
v5.7, v5.10, v6.0, and v5.15 respectively.
Note that patch 3 modifies the existing ULP API. No better solutions
have been found for -net, and there is some similar prior art, see
commit 0df48c26d8 ("tcp: add tcpi_bytes_acked to tcp_info"). Please
also note that TLS ULP Diag has likely the same issue.
Patches 7 to 9 fix issues in the selftests, when executing them on older
kernels, e.g. when testing the last version of these kselftests on the
v5.15.148 kernel as it is done by LKFT when validating stable kernels.
These patches only avoid printing expected errors the console and
marking some tests as "OK" while they have been skipped. Patches 7 and 8
can be backported up to v6.6.
Patches 10 to 13 make sure all MPTCP selftests subtests have a unique
name. It is important to have a unique (sub)test name in TAP, because
that's the test identifier. Some CI environments might drop tests with
duplicated names. Patches 10 to 12 can be backported up to v6.6.
====================
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is important to have a unique (sub)test name in TAP, because some CI
environments drop tests with duplicated name.
Some 'cestab' subtests from the diag selftest had the same names, e.g.:
....chk 0 cestab
Now the previous value is taken, to have different names, e.g.:
....chk 2->0 cestab after flush
While at it, the 'after flush' info is added, similar to what is done
with the 'in use' subtests. Also inspired by these 'in use' subtests,
'many' is displayed instead of a large number:
many msk socket present [ ok ]
....chk many msk in use [ ok ]
....chk many cestab [ ok ]
....chk many->0 msk in use after flush [ ok ]
....chk many->0 cestab after flush [ ok ]
Fixes: 81ab772819 ("selftests: mptcp: diag: check CURRESTAB counters")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is important to have a unique (sub)test name in TAP, because some CI
environments drop tests with duplicated name.
Some 'in use' subtests from the diag selftest had the same names, e.g.:
chk 0 msk in use after flush
Now the previous value is taken, to have different names, e.g.:
chk 2->0 msk in use after flush
While at it, avoid repeating the full message, declare it once in the
helper.
Fixes: ce99025736 ("selftests: mptcp: diag: format subtests results in TAP")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It is important to have a unique (sub)test name in TAP, because some CI
environments drop tests with duplicated names.
Some subtests from the userspace_pm selftest had the same names. That's
because different subflows are created (and deleted) between the same
pair of IP addresses.
Simply adding the destination port in the name is then enough to have
different names, because the destination port is always different.
Note that adding such info takes a bit more space, so we need to
increase a bit the width to print the name, simply to keep all the
'[ OK ]' aligned as before.
Fixes: f589234e1a ("selftests: mptcp: userspace_pm: format subtests results in TAP")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The selftest was correctly recording all the results, but the 'reverse
direction' part was missing in the name when needed.
It is important to have a unique (sub)test name in TAP, because some CI
environments drop tests with duplicated name.
Fixes: 675d99338e ("selftests: mptcp: simult flows: format subtests results in TAP")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the 'Fixes' commit mentioned below, the command that is executed
in __chk_nr() helper can return nothing if the feature is not supported.
This is the case when the MPTCP CURRESTAB counter is not supported.
To avoid this warning ...
./diag.sh: line 65: [: !=: unary operator expected
... we just need to surround '$nr' with double quotes, to support an
empty string when the feature is not supported.
Fixes: 81ab772819 ("selftests: mptcp: diag: check CURRESTAB counters")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the 'Fixes' commit mentioned below, and if the kernel being tested
doesn't support the 'fullmesh' flag, this error will be printed:
netlink error -22 (Invalid argument)
./pm_nl_ctl: bailing out due to netlink error[s]
But that can be normal if the kernel doesn't support the feature, no
need to print this worrying error message while everything else looks
OK. So we can mute stderr. Failures will still be detected if any.
Fixes: 1dc88d241f ("selftests: mptcp: pm_nl_ctl: always look for errors")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the feature is not supported by older kernels, and instead of just
ignoring some tests, we should mark them as skipped, so we can still
track them.
Fixes: d85555ac11 ("selftests: mptcp: pm_netlink: format subtests results in TAP")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fullmesh endpoints could end-up unexpectedly generating duplicate
subflows - same local and remote addresses - when multiple incoming
ADD_ADDR are processed before the PM creates the subflow for the local
endpoints.
Address the issue explicitly checking for duplicates at subflow
creation time.
To avoid a quadratic computational complexity, track the unavailable
remote address ids in a temporary bitmap and initialize such bitmap
with the remote ids of all the existing subflows matching the local
address currently processed.
The above allows additionally replacing the existing code checking
for duplicate entry in the current set with a simple bit test
operation.
Fixes: 2843ff6f36 ("mptcp: remote addresses fullmesh")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/435
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The local address id is accessed lockless by the NL PM, add
all the required ONCE annotation. There is a caveat: the local
id can be initialized late in the subflow life-cycle, and its
validity is controlled by the local_id_valid flag.
Remove such flag and encode the validity in the local_id field
itself with negative value before initialization. That allows
accessing the field consistently with a single read operation.
Fixes: 0ee4261a36 ("mptcp: implement mptcp_pm_remove_subflow")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since the introduction of the subflow ULP diag interface, the
dump callback accessed all the subflow data with lockless.
We need either to annotate all the read and write operation accordingly,
or acquire the subflow socket lock. Let's do latter, even if slower, to
avoid a diffstat havoc.
Fixes: 5147dfb508 ("mptcp: allow dumping subflow context to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Just the same as userspace PM, a new parameter needs_id is added for
in-kernel PM mptcp_pm_nl_append_new_local_addr() too.
Add a new helper mptcp_pm_has_addr_attr_id() to check whether an address
ID is set from PM or not.
In mptcp_pm_nl_get_local_id(), needs_id is always true, but in
mptcp_pm_nl_add_addr_doit(), pass mptcp_pm_has_addr_attr_id() to
needs_it.
Fixes: efd5a4c04e ("mptcp: add the address ID assignment bitmap")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When userspace PM requires to create an ID 0 subflow in "userspace pm
create id 0 subflow" test like this:
userspace_pm_add_sf $ns2 10.0.3.2 0
An ID 1 subflow, in fact, is created.
Since in mptcp_pm_nl_append_new_local_addr(), 'id 0' will be treated as
no ID is set by userspace, and will allocate a new ID immediately:
if (!e->addr.id)
e->addr.id = find_next_zero_bit(pernet->id_bitmap,
MPTCP_PM_MAX_ADDR_ID + 1,
1);
To solve this issue, a new parameter needs_id is added for
mptcp_userspace_pm_append_new_local_addr() to distinguish between
whether userspace PM has set an ID 0 or whether userspace PM has
not set any address.
needs_id is true in mptcp_userspace_pm_get_local_id(), but false in
mptcp_pm_nl_announce_doit() and mptcp_pm_nl_subflow_create_doit().
Fixes: e5ed101a60 ("mptcp: userspace pm allow creating id 0 subflow")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet says:
====================
inet: fix NLM_F_DUMP_INTR logic
Make sure NLM_F_DUMP_INTR is generated if dev_base_seq and
dev_addr_genid are changed by the same amount.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
net->dev_base_seq and ipv6.dev_addr_genid are monotonically increasing.
If we XOR their values, we could miss to detect if both values
were changed with the same amount.
Fixes: 63998ac24f ("ipv6: provide addr and netconf dump consistency info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
net->dev_base_seq and ipv4.dev_addr_genid are monotonically increasing.
If we XOR their values, we could miss to detect if both values
were changed with the same amount.
Fixes: 0465277f6b ("ipv4: provide addr and netconf dump consistency info")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Hong found that when using ftruncate to expand an empty file,
exfat_ent_set() will fail if discontinuous clusters are allocated.
The reason is that the empty file does not have a cluster chain,
but exfat_ent_set() attempts to append the newly allocated cluster
to the cluster chain. In addition, exfat_find_last_cluster() only
supports finding the last cluster in a non-empty file.
So this commit adds a check whether the file is empty. If the file
is empty, exfat_find_last_cluster() and exfat_ent_set() are no longer
called as they do not need to be called.
Fixes: f55c096f62 ("exfat: do not zero the extended part")
Reported-by: Eric Hong <erichong@qnap.com>
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Pull powerpc fixes from Michael Ellerman:
"This is a bit of a big batch for rc4, but just due to holiday hangover
and because I didn't send any fixes last week due to a late revert
request. I think next week should be back to normal.
- Fix ftrace bug on boot caused by exit text sections with
'-fpatchable-function-entry'
- Fix accuracy of stolen time on pseries since the switch to
VIRT_CPU_ACCOUNTING_GEN
- Fix a crash in the IOMMU code when doing DLPAR remove
- Set pt_regs->link on scv entry to fix BPF stack unwinding
- Add missing PPC_FEATURE_BOOKE on 64-bit e5500/e6500, which broke
gdb
- Fix boot on some 6xx platforms with STRICT_KERNEL_RWX enabled
- Fix build failures with KASAN enabled and 32KB stack size
- Some other minor fixes
Thanks to Arnd Bergmann, Benjamin Gray, Christophe Leroy, David
Engraf, Gaurav Batra, Jason Gunthorpe, Jiangfeng Xiao, Matthias
Schiffer, Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nysal Jan K.A,
R Nageswara Sastry, Shivaprasad G Bhat, Shrikanth Hegde, Spoorthy,
Srikar Dronamraju, and Venkat Rao Bagalkote"
* tag 'powerpc-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/iommu: Fix the missing iommu_group_put() during platform domain attach
powerpc/pseries: fix accuracy of stolen time
powerpc/ftrace: Ignore ftrace locations in exit text sections
powerpc/cputable: Add missing PPC_FEATURE_BOOKE on PPC64 Book-E
powerpc/kasan: Limit KASAN thread size increase to 32KB
Revert "powerpc/pseries/iommu: Fix iommu initialisation during DLPAR add"
powerpc: 85xx: mark local functions static
powerpc: udbg_memcons: mark functions static
powerpc/kasan: Fix addr error caused by page alignment
powerpc/6xx: set High BAT Enable flag on G2_LE cores
selftests/powerpc/papr_vpd: Check devfd before get_system_loc_code()
powerpc/64: Set task pt_regs->link to the LR value on scv entry
powerpc/pseries/iommu: Fix iommu initialisation during DLPAR add
powerpc/pseries/papr-sysparm: use u8 arrays for payloads
Pull bcachefs fixes from Kent Overstreet:
"Mostly pretty trivial, the user visible ones are:
- don't barf when replicas_required > replicas
- fix check_version_upgrade() so it doesn't do something nonsensical
when we're downgrading"
* tag 'bcachefs-2024-02-17' of https://evilpiepirate.org/git/bcachefs:
bcachefs: Fix missing va_end()
bcachefs: Fix check_version_upgrade()
bcachefs: Clamp replicas_required to replicas
bcachefs: fix missing endiannes conversion in sb_members
bcachefs: fix kmemleak in __bch2_read_super error handling path
bcachefs: Fix missing bch2_err_class() calls
If 'dev' or 'data' is NULL, the 'priv' variable has an incorrect address
when dereferencing calling netdev_err().
Since we get as 'dev_id' or 'data' what was passed as the 'dev' argument
to request_irq() during interrupt initialization (that is, the net_device
and rx/tx queue pointers initialized at the time of the call) and since
there are usually no checks for the 'dev_id' argument in such handlers
in other drivers, remove these checks from the handlers in stmmac driver.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 8532f613bc ("net: stmmac: introduce MSI Interrupt routines for mac, safety, RX & TX")
Signed-off-by: Pavel Sakharov <p.sakharov@ispras.ru>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull driver core fixes from Greg KH:
"Here are some driver core fixes, a kobject fix, and a documentation
update for 6.8-rc5. In detail these changes are:
- devlink fixes for reported issues with 6.8-rc1
- topology scheduling regression fix that has been reported by many
- kobject loosening of checks change in -rc1 is now reverted as some
codepaths seemed to need the checks
- documentation update for the CVE process. Has been reviewed by
many, the last minute change to the document was to bring the .rst
format back into the the new style rules, the contents did not
change.
All of these, except for the documentation update, have been in
linux-next for over a week. The documentation update has been reviewed
for weeks by a group of developers, and in public for a week and the
wording has stabilized for now. If future changes are needed, we can
do so before 6.8-final is out (or anytime after that)"
* tag 'driver-core-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation: Document the Linux Kernel CVE process
Revert "kobject: Remove redundant checks for whether ktype is NULL"
driver core: fw_devlink: Improve logs for cycle detection
driver core: fw_devlink: Improve detection of overlapping cycles
driver core: Fix device_link_flag_is_sync_state_only()
topology: Set capacity_freq_ref in all cases
Pull char / miscdriver fixes from Greg KH:
"Here is a small set of char/misc and IIO driver fixes for 6.8-rc5.
Included in here are:
- lots of iio driver fixes for reported issues
- nvmem device naming fixup for reported problem
- interconnect driver fixes for reported issues
All of these have been in linux-next for a while with no reported the
issues (the nvmem patch was included in a different branch in
linux-next before sent to me for inclusion here)"
* tag 'char-misc-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
nvmem: include bit index in cell sysfs file name
iio: adc: ad4130: only set GPIO_CTRL if pin is unused
iio: adc: ad4130: zero-initialize clock init data
interconnect: qcom: x1e80100: Add missing ACV enable_mask
interconnect: qcom: sm8650: Use correct ACV enable_mask
iio: accel: bma400: Fix a compilation problem
iio: commom: st_sensors: ensure proper DMA alignment
iio: hid-sensor-als: Return 0 for HID_USAGE_SENSOR_TIME_TIMESTAMP
iio: move LIGHT_UVA and LIGHT_UVB to the end of iio_modifier
staging: iio: ad5933: fix type mismatch regression
iio: humidity: hdc3020: fix temperature offset
iio: adc: ad7091r8: Fix error code in ad7091r8_gpio_setup()
iio: adc: ad_sigma_delta: ensure proper DMA alignment
iio: imu: adis: ensure proper DMA alignment
iio: humidity: hdc3020: Add Makefile, Kconfig and MAINTAINERS entry
iio: imu: bno055: serdev requires REGMAP
iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC
iio: pressure: bmp280: Add missing bmp085 to SPI id table
iio: core: fix memleak in iio_device_register_sysfs
interconnect: qcom: sm8550: Enable sync_state
...
Pull tty / serial fixes from Greg KH:
"Here are three small tty and serial driver fixes for 6.8-rc5:
- revert a 8250_pci1xxxx off-by-one change that was incorrect
- two changes to fix the transmit path of the mxs-auart driver,
fixing a regression in the 6.2 release
All of these have been in linux-next for over a week with no reported
issues"
* tag 'tty-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: mxs-auart: fix tx
serial: core: introduce uart_port_tx_flags()
serial: 8250_pci1xxxx: partially revert off by one patch
Pull USB / Thunderbolt fixes from Greg KH:
"Here are two small fixes for 6.8-rc5:
- thunderbolt to fix a reported issue on many platforms
- dwc3 driver revert of a commit that caused problems in -rc1
Both of these changes have been in linux-next for over a week with no
reported issues"
* tag 'usb-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
Revert "usb: dwc3: Support EBC feature of DWC_usb31"
thunderbolt: Fix setting the CNS bit in ROUTER_CS_5
Pull media fixes from Mauro Carvalho Chehab:
- regression fix for rkisp1 shared IRQ logic
- fix atomisp breakage due to a kAPI change
- permission fix for remote controller BPF support
- memleak fix in ir_toy driver
- Kconfig dependency fix for pwm-ir-rx
* tag 'media/v6.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: pwm-ir-tx: Depend on CONFIG_HIGH_RES_TIMERS
media: ir_toy: fix a memleak in irtoy_tx
media: rc: bpf attach/detach requires write permission
media: atomisp: Adjust for v4l2_subdev_state handling changes in 6.8
media: rkisp1: Fix IRQ handling due to shared interrupts
media: Revert "media: rkisp1: Drop IRQF_SHARED"
Pull pci fixes from Bjorn Helgaas:
- Keep bridges in D0 if we need to poll downstream devices for PME to
resolve a v6.6 regression where we failed to enumerate devices below
bridges put in D3hot by runtime PM, e.g., NVMe drives connected via
Thunderbolt or USB4 docks (Alex Williamson)
- Add Siddharth Vadapalli as PCI TI DRA7XX/J721E reviewer
* tag 'pci-v6.8-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
MAINTAINERS: Add Siddharth Vadapalli as PCI TI DRA7XX/J721E reviewer
PCI: Fix active state requirement in PME polling
Pull probes fix from Masami Hiramatsu:
- tracing/probes: Fix BTF structure member finder to find the members
which are placed after any anonymous union member correctly.
* tag 'probes-fixes-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Fix to search structure fields correctly
Pull smb client fixes from Steve French:
"Five smb3 client fixes, most also for stable:
- Two multichannel fixes (one to fix potential handle leak on retry)
- Work around possible serious data corruption (due to change in
folios in 6.3, for cases when non standard maximum write size
negotiated)
- Symlink creation fix
- Multiuser automount fix"
* tag '6.8-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: Fix regression in writes when non-standard maximum write size negotiated
smb: client: handle path separator of created SMB symlinks
smb: client: set correct id, uid and cruid for multiuser automounts
cifs: update the same create_guid on replay
cifs: fix underflow in parse_server_interfaces()
Fix to search a field from the structure which has anonymous union
correctly.
Since the reference `type` pointer was updated in the loop, the search
loop suddenly aborted where it hits an anonymous union. Thus it can not
find the field after the anonymous union. This avoids updating the
cursor `type` pointer in the loop.
Link: https://lore.kernel.org/all/170791694361.389532.10047514554799419688.stgit@devnote2/
Fixes: 302db0f5b3 ("tracing/probes: Add a function to search a member of a struct/union")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Three fixes are included here. Two are strictly hardware-related
for the i801 and qcom-geni devices. Meanwhile, a fix from Arnd
addresses a compilation error encountered during compile test on
powerpc.
The Linux CXL subsystem is built on the assumption that HPA == SPA.
That is, the host physical address (HPA) the HDM decoder registers are
programmed with are system physical addresses (SPA).
During HDM decoder setup, the DVSEC CXL range registers (cxl-3.1,
8.1.3.8) are checked if the memory is enabled and the CXL range is in
a HPA window that is described in a CFMWS structure of the CXL host
bridge (cxl-3.1, 9.18.1.3).
Now, if the HPA is not an SPA, the CXL range does not match a CFMWS
window and the CXL memory range will be disabled then. The HDM decoder
stops working which causes system memory being disabled and further a
system hang during HDM decoder initialization, typically when a CXL
enabled kernel boots.
Prevent a system hang and do not disable the HDM decoder if the
decoder's CXL range is not found in a CFMWS window.
Note the change only fixes a hardware hang, but does not implement
HPA/SPA translation. Support for this can be added in a follow on
patch series.
Signed-off-by: Robert Richter <rrichter@amd.com>
Fixes: 34e37b4c43 ("cxl/port: Enable HDM Capability after validating DVSEC Ranges")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240216160113.407141-1-rrichter@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Current implementation exports only to
/sys/bus/cxl/devices/.../memN/qos_class. With both ram and pmem exposed,
the second registered sysfs attribute is rejected as duplicate. It's not
possible to create qos_class under the dev_groups via the driver due to
the ram and pmem sysfs sub-directories already created by the device sysfs
groups. Move the ram and pmem qos_class to the device sysfs groups and add
a call to sysfs_update() after the perf data are validated so the
qos_class can be visible. The end results should be
/sys/bus/cxl/devices/.../memN/ram/qos_class and
/sys/bus/cxl/devices/.../memN/pmem/qos_class.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240206190431.1810289-4-dave.jiang@intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Autodiscovered regions can fail to assemble if they are not discovered
in HPA decode order. The user will see failure messages like:
[] cxl region0: endpoint5: HPA order violation region1
[] cxl region0: endpoint5: failed to allocate region reference
The check that is causing the failure helps the CXL driver enforce
a CXL spec mandate that decoders be committed in HPA order. The
check is needless for autodiscovered regions since their decoders
are already programmed. Trying to enforce order in the assembly of
these regions is useless because they are assembled once all their
member endpoints arrive, and there is no guarantee on the order in
which endpoints are discovered during probe.
Keep the existing check, but for autodiscovered regions, allow the
out of order assembly after a sanity check that the lesser numbered
decoder has the lesser HPA starting address.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Tested-by: Wonjae Lee <wj28.lee@samsung.com>
Link: https://lore.kernel.org/r/3dec69ee97524ab229a20c6739272c3000b18408.1706736863.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The compare function used to sort memblks into starting address
order fails when the result of its u64 address subtraction gets
truncated to an int upon return.
The impact of the bad sort is that memblks will be filled out
incorrectly. Depending on the set of memblks, a user may see no
errors at all but still have a bad fill, or see messages reporting
a node overlap that leads to numa init failure:
[] node 0 [mem: ] overlaps with node 1 [mem: ]
[] No NUMA configuration found
Replace with a comparison that can only result in: 1, 0, -1.
Fixes: 8f012db27c ("x86/numa: Introduce numa_fill_memblks()")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/99dcb3ae87e04995e9f293f6158dc8fa0749a487.1705085543.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
numa_fill_memblks() fills in the gaps in numa_meminfo memblks over a
physical address range. To do so, it first creates a list of existing
memblks that overlap that address range. The issue is that it is off
by one when comparing to the end of the address range, so memblks
that do not overlap are selected.
The impact of selecting a memblk that does not actually overlap is
that an existing memblk may be filled when the expected action is to
do nothing and return NUMA_NO_MEMBLK to the caller. The caller can
then add a new NUMA node and memblk.
Replace the broken open-coded search for address overlap with the
memblock helper memblock_addrs_overlap(). Update the kernel doc
and in code comments.
Suggested by: "Huang, Ying" <ying.huang@intel.com>
Fixes: 8f012db27c ("x86/numa: Introduce numa_fill_memblks()")
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/10a3e6109c34c21a8dd4c513cf63df63481a2b07.1705085543.git.alison.schofield@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When emulating an atomic access on behalf of the guest, mark the target
gfn dirty if the CMPXCHG by KVM is attempted and doesn't fault. This
fixes a bug where KVM effectively corrupts guest memory during live
migration by writing to guest memory without informing userspace that the
page is dirty.
Marking the page dirty got unintentionally dropped when KVM's emulated
CMPXCHG was converted to do a user access. Before that, KVM explicitly
mapped the guest page into kernel memory, and marked the page dirty during
the unmap phase.
Mark the page dirty even if the CMPXCHG fails, as the old data is written
back on failure, i.e. the page is still written. The value written is
guaranteed to be the same because the operation is atomic, but KVM's ABI
is that all writes are dirty logged regardless of the value written. And
more importantly, that's what KVM did before the buggy commit.
Huge kudos to the folks on the Cc list (and many others), who did all the
actual work of triaging and debugging.
Fixes: 1c2361f667 ("KVM: x86: Use __try_cmpxchg_user() to emulate atomic accesses")
Cc: stable@vger.kernel.org
Cc: David Matlack <dmatlack@google.com>
Cc: Pasha Tatashin <tatashin@google.com>
Cc: Michael Krebs <mkrebs@google.com>
base-commit: 6769ea8da8a93ed4630f1ce64df6aafcaabfce64
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20240215010004.1456078-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Commit e4bb020f3d ("riscv: detect assembler support for .option arch")
added two tests, one for a valid value to '.option arch' that should
succeed and one for an invalid value that is expected to fail to make
sure that support for '.option arch' is properly detected because Clang
does not error when '.option arch' is not supported:
$ clang --target=riscv64-linux-gnu -Werror -x assembler -c -o /dev/null <(echo '.option arch, +m')
/dev/fd/63:1:9: warning: unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax'
.option arch, +m
^
$ echo $?
0
Unfortunately, the invalid test started being accepted by Clang after
the linked llvm-project change, which causes CONFIG_AS_HAS_OPTION_ARCH
and configurations that depend on it to be silently disabled, even
though those versions do support '.option arch'.
The invalid test can be avoided altogether by using
'-Wa,--fatal-warnings', which will turn all assembler warnings into
errors, like '-Werror' does for the compiler:
$ clang --target=riscv64-linux-gnu -Werror -Wa,--fatal-warnings -x assembler -c -o /dev/null <(echo '.option arch, +m')
/dev/fd/63:1:9: error: unknown option, expected 'push', 'pop', 'rvc', 'norvc', 'relax' or 'norelax'
.option arch, +m
^
$ echo $?
1
The as-instr macros have been updated to make use of this flag, so
remove the invalid test, which allows CONFIG_AS_HAS_OPTION_ARCH to work
for all compiler versions.
Cc: stable@vger.kernel.org
Fixes: e4bb020f3d ("riscv: detect assembler support for .option arch")
Link: 3ac9fe69f7
Reported-by: Eric Biggers <ebiggers@kernel.org>
Closes: https://lore.kernel.org/r/20240121011341.GA97368@sol.localdomain/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Tested-by: Andy Chiu <andybnac@gmail.com>
Reviewed-by: Andy Chiu <andybnac@gmail.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240125-fix-riscv-option-arch-llvm-18-v1-2-390ac9cc3cd0@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Certain assembler instruction tests may only induce warnings from the
assembler on an unsupported instruction or option, which causes as-instr
to succeed when it was expected to fail. Some tests workaround this
limitation by additionally testing that invalid input fails as expected.
However, this is fragile if the assembler is changed to accept the
invalid input, as it will cause the instruction/option to be unavailable
like it was unsupported even when it is.
Use '-Wa,--fatal-warnings' in the as-instr macro to turn these warnings
into hard errors, which avoids this fragility and makes tests more
robust and well formed.
Cc: stable@vger.kernel.org
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Eric Biggers <ebiggers@google.com>
Tested-by: Andy Chiu <andybnac@gmail.com>
Reviewed-by: Andy Chiu <andybnac@gmail.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240125-fix-riscv-option-arch-llvm-18-v1-1-390ac9cc3cd0@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The SED Opal response parsing function response_parse() does not
handle the case of an empty atom in the response. This causes
the entry count to be too high and the response fails to be
parsed. Recognizing, but ignoring, empty atoms allows response
handling to succeed.
Signed-off-by: Greg Joyce <gjoyce@linux.ibm.com>
Link: https://lore.kernel.org/r/20240216210417.3526064-2-gjoyce@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The bq27xxx i2c-client may not have an IRQ, in which case
client->irq will be 0. bq27xxx_battery_i2c_probe() already has
an if (client->irq) check wrapping the request_threaded_irq().
But bq27xxx_battery_i2c_remove() unconditionally calls
free_irq(client->irq) leading to:
[ 190.310742] ------------[ cut here ]------------
[ 190.310843] Trying to free already-free IRQ 0
[ 190.310861] WARNING: CPU: 2 PID: 1304 at kernel/irq/manage.c:1893 free_irq+0x1b8/0x310
Followed by a backtrace when unbinding the driver. Add
an if (client->irq) to bq27xxx_battery_i2c_remove() mirroring
probe() to fix this.
Fixes: 444ff00734 ("power: supply: bq27xxx: Fix I2C IRQ race on remove")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240215155133.70537-1-hdegoede@redhat.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Pull SCSI fixes from James Bottomley:
"Three fixes: the two fnic ones are a revert and a refix, which is why
the diffstat is a bit big. The target one also extracts a function to
add a check for configuration and so looks bigger than it is"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: fnic: Move fnic_fnic_flush_tx() to a work queue
scsi: Revert "scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock"
scsi: target: Fix unmap setup during configuration
Pull workqueue fix from Tejun Heo:
"Just one patch to revert commit ca10d851b9 ("workqueue: Override
implicit ordered attribute in workqueue_apply_unbound_cpumask()").
This commit could break ordering guarantees for ordered workqueues.
The problem that the commit tried to resolve partially - making
ordered workqueues follow unbound cpumask - is fully solved in
wq/for-6.9 branch"
* tag 'wq-for-6.8-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
Revert "workqueue: Override implicit ordered attribute in workqueue_apply_unbound_cpumask()"
Pull io_uring fix from Jens Axboe:
"Just a single fix for a regression in how overflow is handled for
multishot accept requests"
* tag 'io_uring-6.8-2024-02-16' of git://git.kernel.dk/linux:
io_uring/net: fix multishot accept overflow handling
Pull ceph fixes from Ilya Dryomov:
"Additional cap handling fixes from Xiubo to avoid "client isn't
responding to mclientcaps(revoke)" stalls on the MDS side"
* tag 'ceph-for-6.8-rc5' of https://github.com/ceph/ceph-client:
ceph: add ceph_cap_unlink_work to fire check_caps() immediately
ceph: always queue a writeback when revoking the Fb caps
The NOKPROBE_SYMBOL macro (and others) were moved to
asm-generic/kprobes.h in 2017 by commit 7d134b2ce6 ("kprobes: move
kprobe declarations to asm-generic/kprobes.h"), and this new header
was included by asm/kprobes.h unconditionally on all architectures.
When kprobe support was added to parisc in 2017 by commit
8858ac8e9e ("parisc: Implement kprobes"), that header was only
included when CONFIG_KPROBES was enabled.
This can lead to build failures when NOKPROBE_SYMBOL is used, but
CONFIG_KPROBES is disabled. This mistake however was never actually
noticed because linux/kprobes.h also includes asm-generic/kprobes.h
(though I do not understand why that is, because it also includes
asm/kprobes.h).
To prevent eventual build failures, I suggest to always include
asm-generic/kprobes.h on parisc, just like all the other architectures
do. This way, including asm/kprobes.h suffices, and nobody (outside
of arch/) ever needs to explicitly include asm-generic/kprobes.h.
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes a bug revealed by -Wmissing-prototypes when
CONFIG_FUNCTION_GRAPH_TRACER is enabled but not CONFIG_DYNAMIC_FTRACE:
arch/parisc/kernel/ftrace.c:82:5: error: no previous prototype for 'ftrace_enable_ftrace_graph_caller' [-Werror=missing-prototypes]
82 | int ftrace_enable_ftrace_graph_caller(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/parisc/kernel/ftrace.c:88:5: error: no previous prototype for 'ftrace_disable_ftrace_graph_caller' [-Werror=missing-prototypes]
88 | int ftrace_disable_ftrace_graph_caller(void)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Avoid dropping the page refcount twice when freeing an unlinked
page-table subtree.
- Don't source the VFIO Kconfig twice
- Fix protected-mode locking order between kvm and vcpus
RISC-V:
- Fix steal-time related sparse warnings
x86:
- Cleanup gtod_is_based_on_tsc() to return "bool" instead of an "int"
- Make a KVM_REQ_NMI request while handling KVM_SET_VCPU_EVENTS if
and only if the incoming events->nmi.pending is non-zero. If the
target vCPU is in the UNITIALIZED state, the spurious request will
result in KVM exiting to userspace, which in turn causes QEMU to
constantly acquire and release QEMU's global mutex, to the point
where the BSP is unable to make forward progress.
- Fix a type (u8 versus u64) goof that results in pmu->fixed_ctr_ctrl
being incorrectly truncated, and ultimately causes KVM to think a
fixed counter has already been disabled (KVM thinks the old value
is '0').
- Fix a stack leak in KVM_GET_MSRS where a failed MSR read from
userspace that is ultimately ignored due to ignore_msrs=true
doesn't zero the output as intended.
Selftests cleanups and fixes:
- Remove redundant newlines from error messages.
- Delete an unused variable in the AMX test (which causes build
failures when compiling with -Werror).
- Fail instead of skipping tests if open(), e.g. of /dev/kvm, fails
with an error code other than ENOENT (a Hyper-V selftest bug
resulted in an EMFILE, and the test eventually got skipped).
- Fix TSC related bugs in several Hyper-V selftests.
- Fix a bug in the dirty ring logging test where a sem_post() could
be left pending across multiple runs, resulting in incorrect
synchronization between the main thread and the vCPU worker thread.
- Relax the dirty log split test's assertions on 4KiB mappings to fix
false positives due to the number of mappings for memslot 0 (used
for code and data that is NOT being dirty logged) changing, e.g.
due to NUMA balancing"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: arm64: Fix double-free following kvm_pgtable_stage2_free_unlinked()
RISC-V: KVM: Use correct restricted types
RISC-V: paravirt: Use correct restricted types
RISC-V: paravirt: steal_time should be static
KVM: selftests: Don't assert on exact number of 4KiB in dirty log split test
KVM: selftests: Fix a semaphore imbalance in the dirty ring logging test
KVM: x86: Fix KVM_GET_MSRS stack info leak
KVM: arm64: Do not source virt/lib/Kconfig twice
KVM: x86/pmu: Fix type length error when reading pmu->fixed_ctr_ctrl
KVM: x86: Make gtod_is_based_on_tsc() return 'bool'
KVM: selftests: Make hyperv_clock require TSC based system clocksource
KVM: selftests: Run clocksource dependent tests with hyperv_clocksource_tsc_page too
KVM: selftests: Use generic sys_clocksource_is_tsc() in vmx_nested_tsc_scaling_test
KVM: selftests: Generalize check_clocksource() from kvm_clock_test
KVM: x86: make KVM_REQ_NMI request iff NMI pending for vcpu
KVM: arm64: Fix circular locking dependency
KVM: selftests: Fail tests when open() fails with !ENOENT
KVM: selftests: Avoid infinite loop in hyperv_features when invtsc is missing
KVM: selftests: Delete superfluous, unused "stage" variable in AMX test
KVM: selftests: x86_64: Remove redundant newlines
...
Pull tracing fixes from Steven Rostedt:
- Fix the #ifndef that didn't have the 'CONFIG_' prefix on
HAVE_DYNAMIC_FTRACE_WITH_REGS
The fix to have dynamic trampolines work with x86 broke arm64 as the
config used in the #ifdef was HAVE_DYNAMIC_FTRACE_WITH_REGS and not
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS which removed the fix that the
previous fix was to fix.
- Fix tracing_on state
The code to test if "tracing_on" is set incorrectly used
ring_buffer_record_is_on() which returns false if the ring buffer
isn't able to be written to.
But the ring buffer disable has several bits that disable it. One is
internal disabling which is used for resizing and other modifications
of the ring buffer. But the "tracing_on" user space visible flag
should only report if tracing is actually on and not internally
disabled, as this can cause confusion as writing "1" when it is
disabled will not enable it.
Instead use ring_buffer_record_is_set_on() which shows the user space
visible settings.
- Fix a false positive kmemleak on saved cmdlines
Now that the saved_cmdlines structure is allocated via alloc_page()
and not via kmalloc() it has become invisible to kmemleak. The
allocation done to one of its pointers was flagged as a dangling
allocation leak. Make kmemleak aware of this allocation and free.
- Fix synthetic event dynamic strings
An update that cleaned up the synthetic event code removed the return
value of trace_string(), and had it return zero instead of the
length, causing dynamic strings in the synthetic event to always have
zero size.
- Clean up documentation and header files for seq_buf
* tag 'trace-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
seq_buf: Fix kernel documentation
seq_buf: Don't use "proxy" headers
tracing/synthetic: Fix trace_string() return value
tracing: Inform kmemleak of saved_cmdlines allocation
tracing: Use ring_buffer_record_is_set_on() in tracer_tracing_is_on()
tracing: Fix HAVE_DYNAMIC_FTRACE_WITH_REGS ifdef
Pull arm64 fixes from Will Deacon:
"It's a little busier than normal, but it's still not a lot of code and
things seem fairly quiet in general:
- Fix allocation failure during SVE coredumps
- Fix handling of SVE context on signal delivery
- Enable Neoverse N2 CPU errata workarounds for Microsoft's "Azure
Cobalt 100" clone
- Work around CMN PMU erratum in AmpereOneX implementation
- Fix typo in CXL PMU event definition
- Fix jump label asm constraints"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/sve: Lower the maximum allocation for the SVE ptrace regset
arm64: Subscribe Microsoft Azure Cobalt 100 to ARM Neoverse N2 errata
perf/arm-cmn: Workaround AmpereOneX errata AC04_MESH_1 (incorrect child count)
arm64: jump_label: use constraints "Si" instead of "i"
arm64: fix typo in comments
perf: CXL: fix mismatched cpmu event opcode
arm64/signal: Don't assume that TIF_SVE means we saved SVE state
clang-16 warns about casting between incompatible function types:
drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadow.c:161:10: error: cast from 'void (*)(const struct firmware *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
161 | .fini = (void(*)(void *))release_firmware,
This one was done to use the generic shadow_fw_release() function as a
callback for struct nvbios_source. Change it to use the same prototype
as the other five instances, with a trivial helper function that actually
calls release_firmware.
Fixes: 70c0f263cc ("drm/nouveau/bios: pull in basic vbios subdev, more to come later")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240213095753.455062-1-arnd@kernel.org
Pull zonefs fix from Damien Le Moal:
- Fix direct write error handling to avoid a race between failed IO
completion and the submission path itself which can result in an
invalid file size exposed to the user after the failed IO.
* tag 'zonefs-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: Improve error handling
Pull sound fixes from Takashi Iwai:
"A collection of device-specific fixes. It became a bit bigger than
wished, but all look reasonably small and safe to apply.
- A few Cirrus Logic CS35L56 and CS42L43 driver fixes
- ASoC SOF fixes and workarounds
- Various ASoC Intel fixes
- Lots of HD-, USB-audio and AMD ACP quirks"
* tag 'sound-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits)
ALSA: usb-audio: More relaxed check of MIDI jack names
ALSA: hda/realtek: fix mute/micmute LED For HP mt645
ALSA: hda/realtek: cs35l41: Fix order and duplicates in quirks table
ALSA: hda/realtek: cs35l41: Fix device ID / model name
ALSA: hda/realtek: cs35l41: Add internal speaker support for ASUS UM3402 with missing DSD
ASoC: cs35l56: Workaround for ACPI with broken spk-id-gpios property
ALSA: hda: Add Lenovo Legion 7i gen7 sound quirk
ASoC: SOF: IPC3: fix message bounds on ipc ops
ASoC: SOF: ipc4-pcm: Workaround for crashed firmware on system suspend
ASoC: q6dsp: fix event handler prototype
ASoC: SOF: Intel: pci-lnl: Change the topology path to intel/sof-ipc4-tplg
ASoC: SOF: Intel: pci-tgl: Change the default paths and firmware names
ASoC: amd: yc: Fix non-functional mic on Lenovo 82UU
ASoC: rt5645: Add DMI quirk for inverted jack-detect on MeeGoPad T8
ASoC: rt5645: Make LattePanda board DMI match more precise
ASoC: SOF: amd: Fix locking in ACP IRQ handler
ASoC: rt5645: Fix deadlock in rt5645_jack_detect_work()
ASoC: Intel: cht_bsw_rt5645: Cleanup codec_name handling
ASoC: Intel: Boards: Fix NULL pointer deref in BYT/CHT boards
ASoC: cs35l56: Remove default from IRQ1_CFG register
...
Pull gpio fixes from Bartosz Golaszewski:
- add missing stubs for functions that are not built with GPIOLIB
disabled
* tag 'gpio-fixes-for-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: add gpio_device_get_label() stub for !GPIOLIB
gpiolib: add gpio_device_get_base() stub for !GPIOLIB
gpiolib: add gpiod_to_gpio_device() stub for !GPIOLIB
Pull lsm fix from Paul Moore:
"One small LSM patch to fix a potential integer overflow in the newly
added lsm_set_self_attr() syscall"
* tag 'lsm-pr-20240215' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: fix integer overflow in lsm_set_self_attr() syscall
Currently when the kernel fails to add a cert to the .machine keyring,
it will throw an error immediately in the function integrity_add_key.
Since the kernel will try adding to the .platform keyring next or throw
an error (in the caller of integrity_add_key i.e. add_to_machine_keyring),
so there is no need to throw an error immediately in integrity_add_key.
Reported-by: itrymybest80@protonmail.com
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2239331
Fixes: d19967764b ("integrity: Introduce a Linux keyring called machine")
Reviewed-by: Eric Snowberg <eric.snowberg@oracle.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
head is defined in idxd->evl as a shadow of head in the EVLSTATUS register.
There are two issues related to the shadow head:
1. Mismatch between the shadow head and the state of the EVLSTATUS
register:
If Event Log is supported, upon completion of the Enable Device command,
the Event Log head in the variable idxd->evl->head should be cleared to
match the state of the EVLSTATUS register. But the variable is not reset
currently, leading mismatch between the variable and the register state.
The mismatch causes incorrect processing of Event Log entries.
2. Unnecessary shadow head definition:
The shadow head is unnecessary as head can be read directly from the
EVLSTATUS register. Reading head from the register incurs no additional
cost because event log head and tail are always read together and
tail is already read directly from the register as required by hardware.
Remove the shadow Event Log head stored in idxd->evl to address the
mentioned issues.
Fixes: 244da66cda ("dmaengine: idxd: setup event log configuration")
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240215024931.1739621-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The MSM8996 platform has registers setup different to the rest of QMP v3
USB platforms. It has PCS region at 0x600 and no PCS_MISC region, while
other platforms have PCS region at 0x800 and PCS_MISC at 0x600. This
results in the malfunctioning USB host on some of the platforms. The
commit f74c35b630 ("phy: qcom-qmp-usb: fix register offsets for
ipq8074/ipq6018") fixed the issue for IPQ platforms, but missed the
SDM845 which has the same register layout.
To simplify future platform addition and to make the driver more future
proof, rename qmp_usb_offsets_v3 to qmp_usb_offsets_v3_msm8996 (to mark
its peculiarity), rename qmp_usb_offsets_ipq8074 to qmp_usb_offsets_v3
and use it for SDM845 platform.
Fixes: 2be22aae6b ("phy: qcom-qmp-usb: populate offsets configuration")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240213133824.2218916-1-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
If we're redirecting the skb, and haven't called tcf_mirred_forward(),
yet, we need to tell the core to drop the skb by setting the retcode
to SHOT. If we have called tcf_mirred_forward(), however, the skb
is out of our hands and returning SHOT will lead to UaF.
Move the retval override to the error path which actually need it.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Fixes: e5cf1baf92 ("act_mirred: use TC_ACT_REINSERT when possible")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test Davide added in commit ca22da2fbd ("act_mirred: use the backlog
for nested calls to mirred ingress") hangs our testing VMs every 10 or so
runs, with the familiar tcp_v4_rcv -> tcp_v4_rcv deadlock reported by
lockdep.
The problem as previously described by Davide (see Link) is that
if we reverse flow of traffic with the redirect (egress -> ingress)
we may reach the same socket which generated the packet. And we may
still be holding its socket lock. The common solution to such deadlocks
is to put the packet in the Rx backlog, rather than run the Rx path
inline. Do that for all egress -> ingress reversals, not just once
we started to nest mirred calls.
In the past there was a concern that the backlog indirection will
lead to loss of error reporting / less accurate stats. But the current
workaround does not seem to address the issue.
Fixes: 53592b3640 ("net/sched: act_mirred: Implement ingress actions")
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Suggested-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/netdev/33dc43f587ec1388ba456b4915c75f02a8aae226.1663945716.git.dcaratti@redhat.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This driver uses functions that are supplied by the Kconfig symbol
PHYLIB, so select it to ensure that they are built as needed.
When CONFIG_ADIN1110=y and CONFIG_PHYLIB=m, there are multiple build
(linker) errors that are resolved by this Kconfig change:
ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_net_open':
drivers/net/ethernet/adi/adin1110.c:933: undefined reference to `phy_start'
ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_probe_netdevs':
drivers/net/ethernet/adi/adin1110.c:1603: undefined reference to `get_phy_device'
ld: drivers/net/ethernet/adi/adin1110.c:1609: undefined reference to `phy_connect'
ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_disconnect_phy':
drivers/net/ethernet/adi/adin1110.c:1226: undefined reference to `phy_disconnect'
ld: drivers/net/ethernet/adi/adin1110.o: in function `devm_mdiobus_alloc':
include/linux/phy.h:455: undefined reference to `devm_mdiobus_alloc_size'
ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_register_mdiobus':
drivers/net/ethernet/adi/adin1110.c:529: undefined reference to `__devm_mdiobus_register'
ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_net_stop':
drivers/net/ethernet/adi/adin1110.c:958: undefined reference to `phy_stop'
ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_disconnect_phy':
drivers/net/ethernet/adi/adin1110.c:1226: undefined reference to `phy_disconnect'
ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_adjust_link':
drivers/net/ethernet/adi/adin1110.c:1077: undefined reference to `phy_print_status'
ld: drivers/net/ethernet/adi/adin1110.o: in function `adin1110_ioctl':
drivers/net/ethernet/adi/adin1110.c:790: undefined reference to `phy_do_ioctl'
ld: drivers/net/ethernet/adi/adin1110.o:(.rodata+0xf60): undefined reference to `phy_ethtool_get_link_ksettings'
ld: drivers/net/ethernet/adi/adin1110.o:(.rodata+0xf68): undefined reference to `phy_ethtool_set_link_ksettings'
Fixes: bc93e19d08 ("net: ethernet: adi: Add ADIN1110 support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402070626.eZsfVHG5-lkp@intel.com/
Cc: Lennart Franzen <lennart@lfdomain.com>
Cc: Alexandru Tachici <alexandru.tachici@analog.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tobias Waldekranz says:
====================
net: bridge: switchdev: Ensure MDB events are delivered exactly once
When a device is attached to a bridge, drivers will request a replay
of objects that were created before the device joined the bridge, that
are still of interest to the joining port. Typical examples include
FDB entries and MDB memberships on other ports ("foreign interfaces")
or on the bridge itself.
Conversely when a device is detached, the bridge will synthesize
deletion events for all those objects that are still live, but no
longer applicable to the device in question.
This series eliminates two races related to the synching and
unsynching phases of a bridge's MDB with a joining or leaving device,
that would cause notifications of such objects to be either delivered
twice (1/2), or not at all (2/2).
A similar race to the one solved by 1/2 still remains for the
FDB. This is much harder to solve, due to the lockless operation of
the FDB's rhashtable, and is therefore knowingly left out of this
series.
v1 -> v2:
- Squash the previously separate addition of
switchdev_port_obj_act_is_deferred into first consumer.
- Use ether_addr_equal to compare MAC addresses.
- Document switchdev_port_obj_act_is_deferred (renamed from
switchdev_port_obj_is_deferred in v1, to indicate that we also match
on the action).
- Delay allocations of MDB objects until we know they're needed.
- Use non-RCU version of the hash list iterator, now that the MDB is
not scanned while holding the RCU read lock.
- Add Fixes tag to commit message
v2 -> v3:
- Fix unlocking in error paths
- Access RCU protected port list via mlock_dereference, since MDB is
guaranteed to remain constant for the duration of the scan.
v3 -> v4:
- Limit the search for exiting deferred events in 1/2 to only apply to
additions, since the problem does not exist in the deletion case.
- Add 2/2, to plug a related race when unoffloading an indirectly
associated device.
v4 -> v5:
- Fix grammatical errors in kerneldoc of
switchdev_port_obj_act_is_deferred
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When unoffloading a device, it is important to ensure that all
relevant deferred events are delivered to it before it disassociates
itself from the bridge.
Before this change, this was true for the normal case when a device
maps 1:1 to a net_bridge_port, i.e.
br0
/
swp0
When swp0 leaves br0, the call to switchdev_deferred_process() in
del_nbp() makes sure to process any outstanding events while the
device is still associated with the bridge.
In the case when the association is indirect though, i.e. when the
device is attached to the bridge via an intermediate device, like a
LAG...
br0
/
lag0
/
swp0
...then detaching swp0 from lag0 does not cause any net_bridge_port to
be deleted, so there was no guarantee that all events had been
processed before the device disassociated itself from the bridge.
Fix this by always synchronously processing all deferred events before
signaling completion of unoffloading back to the driver.
Fixes: 4e51bf44a0 ("net: bridge: move the switchdev object replay helpers to "push" mode")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before this change, generation of the list of MDB events to replay
would race against the creation of new group memberships, either from
the IGMP/MLD snooping logic or from user configuration.
While new memberships are immediately visible to walkers of
br->mdb_list, the notification of their existence to switchdev event
subscribers is deferred until a later point in time. So if a replay
list was generated during a time that overlapped with such a window,
it would also contain a replay of the not-yet-delivered event.
The driver would thus receive two copies of what the bridge internally
considered to be one single event. On destruction of the bridge, only
a single membership deletion event was therefore sent. As a
consequence of this, drivers which reference count memberships (at
least DSA), would be left with orphan groups in their hardware
database when the bridge was destroyed.
This is only an issue when replaying additions. While deletion events
may still be pending on the deferred queue, they will already have
been removed from br->mdb_list, so no duplicates can be generated in
that scenario.
To a user this meant that old group memberships, from a bridge in
which a port was previously attached, could be reanimated (in
hardware) when the port joined a new bridge, without the new bridge's
knowledge.
For example, on an mv88e6xxx system, create a snooping bridge and
immediately add a port to it:
root@infix-06-0b-00:~$ ip link add dev br0 up type bridge mcast_snooping 1 && \
> ip link set dev x3 up master br0
And then destroy the bridge:
root@infix-06-0b-00:~$ ip link del dev br0
root@infix-06-0b-00:~$ mvls atu
ADDRESS FID STATE Q F 0 1 2 3 4 5 6 7 8 9 a
DEV:0 Marvell 88E6393X
33:33:00:00:00:6a 1 static - - 0 . . . . . . . . . .
33:33:ff:87:e4:3f 1 static - - 0 . . . . . . . . . .
ff:ff:ff:ff:ff:ff 1 static - - 0 1 2 3 4 5 6 7 8 9 a
root@infix-06-0b-00:~$
The two IPv6 groups remain in the hardware database because the
port (x3) is notified of the host's membership twice: once via the
original event and once via a replay. Since only a single delete
notification is sent, the count remains at 1 when the bridge is
destroyed.
Then add the same port (or another port belonging to the same hardware
domain) to a new bridge, this time with snooping disabled:
root@infix-06-0b-00:~$ ip link add dev br1 up type bridge mcast_snooping 0 && \
> ip link set dev x3 up master br1
All multicast, including the two IPv6 groups from br0, should now be
flooded, according to the policy of br1. But instead the old
memberships are still active in the hardware database, causing the
switch to only forward traffic to those groups towards the CPU (port
0).
Eliminate the race in two steps:
1. Grab the write-side lock of the MDB while generating the replay
list.
This prevents new memberships from showing up while we are generating
the replay list. But it leaves the scenario in which a deferred event
was already generated, but not delivered, before we grabbed the
lock. Therefore:
2. Make sure that no deferred version of a replay event is already
enqueued to the switchdev deferred queue, before adding it to the
replay list, when replaying additions.
Fixes: 4f2673b3a2 ("net: bridge: add helper to replay port and host-joined mdb entries")
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
iucv_path_table is a dynamically allocated array of pointers to
struct iucv_path items. Yet, its size is calculated as if it was
an array of struct iucv_path items.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Olliver reported that his system crashes when plugging in Thunderbolt 1
device:
BUG: kernel NULL pointer dereference, address: 0000000000000020
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:tb_port_do_update_credits+0x1b/0x130 [thunderbolt]
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x171/0x4e0
? exc_page_fault+0x7f/0x180
? asm_exc_page_fault+0x26/0x30
? tb_port_do_update_credits+0x1b/0x130
? tb_switch_update_link_attributes+0x83/0xd0
tb_switch_add+0x7a2/0xfe0
tb_scan_port+0x236/0x6f0
tb_handle_hotplug+0x6db/0x900
process_one_work+0x171/0x340
worker_thread+0x27b/0x3a0
? __pfx_worker_thread+0x10/0x10
kthread+0xe5/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
This is due the fact that some Thunderbolt 1 devices only have one lane
adapter. Fix this by checking for the lane 1 before we read its credits.
Reported-by: Olliver Schinagl <oliver@schinagl.nl>
Closes: https://lore.kernel.org/linux-usb/c24c7882-6254-4e68-8f22-f3e8f65dc84f@schinagl.nl/
Fixes: 81af2952e6 ("thunderbolt: Add support for asymmetric link")
Cc: stable@vger.kernel.org
Cc: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
The conversion to netfs in the 6.3 kernel caused a regression when
maximum write size is set by the server to an unexpected value which is
not a multiple of 4096 (similarly if the user overrides the maximum
write size by setting mount parm "wsize", but sets it to a value that
is not a multiple of 4096). When negotiated write size is not a
multiple of 4096 the netfs code can skip the end of the final
page when doing large sequential writes, causing data corruption.
This section of code is being rewritten/removed due to a large
netfs change, but until that point (ie for the 6.3 kernel until now)
we can not support non-standard maximum write sizes.
Add a warning if a user specifies a wsize on mount that is not
a multiple of 4096 (and round down), also add a change where we
round down the maximum write size if the server negotiates a value
that is not a multiple of 4096 (we also have to check to make sure that
we do not round it down to zero).
Reported-by: R. Diez" <rdiez-2006@rd10.de>
Fixes: d08089f649 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Suggested-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Acked-by: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Tested-by: Matthew Ruffell <matthew.ruffell@canonical.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: stable@vger.kernel.org # v6.3+
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Under x86-64, when using bpf_probe_read_kernel{_str}() or
bpf_probe_read{_str}() to read vsyscall page, the read may trigger oops,
so add one test case to ensure that the problem is fixed. Beside those
four bpf helpers mentioned above, testing the read of vsyscall page by
using bpf_probe_read_user{_str} and bpf_copy_from_user{_task}() as well.
The test case passes the address of vsyscall page to these six helpers
and checks whether the returned values are expected:
1) For bpf_probe_read_kernel{_str}()/bpf_probe_read{_str}(), the
expected return value is -ERANGE as shown below:
bpf_probe_read_kernel_common
copy_from_kernel_nofault
// false, return -ERANGE
copy_from_kernel_nofault_allowed
2) For bpf_probe_read_user{_str}(), the expected return value is -EFAULT
as show below:
bpf_probe_read_user_common
copy_from_user_nofault
// false, return -EFAULT
__access_ok
3) For bpf_copy_from_user(), the expected return value is -EFAULT:
// return -EFAULT
bpf_copy_from_user
copy_from_user
_copy_from_user
// return false
access_ok
4) For bpf_copy_from_user_task(), the expected return value is -EFAULT:
// return -EFAULT
bpf_copy_from_user_task
access_process_vm
// return 0
vma_lookup()
// return 0
expand_stack()
The occurrence of oops depends on the availability of CPU SMAP [1]
feature and there are three possible configurations of vsyscall page in
the boot cmd-line: vsyscall={xonly|none|emulate}, so there are a total
of six possible combinations. Under all these combinations, the test
case runs successfully.
[1]: https://en.wikipedia.org/wiki/Supervisor_Mode_Access_Prevention
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20240202103935.3154011-4-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When trying to use copy_from_kernel_nofault() to read vsyscall page
through a bpf program, the following oops was reported:
BUG: unable to handle page fault for address: ffffffffff600000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 3231067 P4D 3231067 PUD 3233067 PMD 3235067 PTE 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 20390 Comm: test_progs ...... 6.7.0+ #58
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ......
RIP: 0010:copy_from_kernel_nofault+0x6f/0x110
......
Call Trace:
<TASK>
? copy_from_kernel_nofault+0x6f/0x110
bpf_probe_read_kernel+0x1d/0x50
bpf_prog_2061065e56845f08_do_probe_read+0x51/0x8d
trace_call_bpf+0xc5/0x1c0
perf_call_bpf_enter.isra.0+0x69/0xb0
perf_syscall_enter+0x13e/0x200
syscall_trace_enter+0x188/0x1c0
do_syscall_64+0xb5/0xe0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
</TASK>
......
---[ end trace 0000000000000000 ]---
The oops is triggered when:
1) A bpf program uses bpf_probe_read_kernel() to read from the vsyscall
page and invokes copy_from_kernel_nofault() which in turn calls
__get_user_asm().
2) Because the vsyscall page address is not readable from kernel space,
a page fault exception is triggered accordingly.
3) handle_page_fault() considers the vsyscall page address as a user
space address instead of a kernel space address. This results in the
fix-up setup by bpf not being applied and a page_fault_oops() is invoked
due to SMAP.
Considering handle_page_fault() has already considered the vsyscall page
address as a userspace address, fix the problem by disallowing vsyscall
page read for copy_from_kernel_nofault().
Originally-by: Thomas Gleixner <tglx@linutronix.de>
Reported-by: syzbot+72aa0161922eba61b50e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/CAG48ez06TZft=ATH1qh2c5mpS5BT8UakwNkzi6nvK5_djC-4Nw@mail.gmail.com
Reported-by: xingwei lee <xrivendell7@gmail.com>
Closes: https://lore.kernel.org/bpf/CABOYnLynjBoFZOf3Z4BhaZkc5hx_kHfsjiW+UWLoB=w33LvScw@mail.gmail.com
Signed-off-by: Hou Tao <houtao1@huawei.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240202103935.3154011-3-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Write error handling is racy and can sometime lead to the error recovery
path wrongly changing the inode size of a sequential zone file to an
incorrect value which results in garbage data being readable at the end
of a file. There are 2 problems:
1) zonefs_file_dio_write() updates a zone file write pointer offset
after issuing a direct IO with iomap_dio_rw(). This update is done
only if the IO succeed for synchronous direct writes. However, for
asynchronous direct writes, the update is done without waiting for
the IO completion so that the next asynchronous IO can be
immediately issued. However, if an asynchronous IO completes with a
failure right before the i_truncate_mutex lock protecting the update,
the update may change the value of the inode write pointer offset
that was corrected by the error path (zonefs_io_error() function).
2) zonefs_io_error() is called when a read or write error occurs. This
function executes a report zone operation using the callback function
zonefs_io_error_cb(), which does all the error recovery handling
based on the current zone condition, write pointer position and
according to the mount options being used. However, depending on the
zoned device being used, a report zone callback may be executed in a
context that is different from the context of __zonefs_io_error(). As
a result, zonefs_io_error_cb() may be executed without the inode
truncate mutex lock held, which can lead to invalid error processing.
Fix both problems as follows:
- Problem 1: Perform the inode write pointer offset update before a
direct write is issued with iomap_dio_rw(). This is safe to do as
partial direct writes are not supported (IOMAP_DIO_PARTIAL is not
set) and any failed IO will trigger the execution of zonefs_io_error()
which will correct the inode write pointer offset to reflect the
current state of the one on the device.
- Problem 2: Change zonefs_io_error_cb() into zonefs_handle_io_error()
and call this function directly from __zonefs_io_error() after
obtaining the zone information using blkdev_report_zones() with a
simple callback function that copies to a local stack variable the
struct blk_zone obtained from the device. This ensures that error
handling is performed holding the inode truncate mutex.
This change also simplifies error handling for conventional zone files
by bypassing the execution of report zones entirely. This is safe to
do because the condition of conventional zones cannot be read-only or
offline and conventional zone files are always fully mapped with a
constant file size.
Reported-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 8dcc1a9d90 ("fs: New zonefs file system")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
md_start_sync() will suspend the array if there are spares that can be
added or removed from conf, however, if reshape is still in progress,
this won't happen at all or data will be corrupted(remove_and_add_spares
won't be called from md_choose_sync_action for reshape), hence there is
no need to suspend the array if reshape is not done yet.
Meanwhile, there is a potential deadlock for raid456:
1) reshape is interrupted;
2) set one of the disk WantReplacement, and add a new disk to the array,
however, recovery won't start until the reshape is finished;
3) then issue an IO across reshpae position, this IO will wait for
reshape to make progress;
4) continue to reshape, then md_start_sync() found there is a spare disk
that can be added to conf, mddev_suspend() is called;
Step 4 and step 3 is waiting for each other, deadlock triggered. Noted
this problem is found by code review, and it's not reporduced yet.
Fix this porblem by don't suspend the array for interrupted reshape,
this is safe because conf won't be changed until reshape is done.
Fixes: bc08041b32 ("md: suspend array in md_start_sync() if array need reconfiguration")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240201092559.910982-6-yukuai1@huaweicloud.com
Currently, if reshape is interrupted, then reassemble the array will
register sync_thread directly from pers->run(), in this case
'MD_RECOVERY_RUNNING' is set directly, however, there is no guarantee
that md_do_sync() will be executed, hence stop_sync_thread() will hang
because 'MD_RECOVERY_RUNNING' can't be cleared.
Last patch make sure that md_do_sync() will set MD_RECOVERY_DONE,
however, following hang can still be triggered by dm-raid test
shell/lvconvert-raid-reshape.sh occasionally:
[root@fedora ~]# cat /proc/1982/stack
[<0>] stop_sync_thread+0x1ab/0x270 [md_mod]
[<0>] md_frozen_sync_thread+0x5c/0xa0 [md_mod]
[<0>] raid_presuspend+0x1e/0x70 [dm_raid]
[<0>] dm_table_presuspend_targets+0x40/0xb0 [dm_mod]
[<0>] __dm_destroy+0x2a5/0x310 [dm_mod]
[<0>] dm_destroy+0x16/0x30 [dm_mod]
[<0>] dev_remove+0x165/0x290 [dm_mod]
[<0>] ctl_ioctl+0x4bb/0x7b0 [dm_mod]
[<0>] dm_ctl_ioctl+0x11/0x20 [dm_mod]
[<0>] vfs_ioctl+0x21/0x60
[<0>] __x64_sys_ioctl+0xb9/0xe0
[<0>] do_syscall_64+0xc6/0x230
[<0>] entry_SYSCALL_64_after_hwframe+0x6c/0x74
Meanwhile mddev->recovery is:
MD_RECOVERY_RUNNING |
MD_RECOVERY_INTR |
MD_RECOVERY_RESHAPE |
MD_RECOVERY_FROZEN
Fix this problem by remove the code to register sync_thread directly
from raid10 and raid5. And let md_check_recovery() to register
sync_thread.
Fixes: f67055780c ("[PATCH] md: Checkpoint and allow restart of raid5 reshape")
Fixes: f52f5c71f3 ("md: fix stopping sync thread")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240201092559.910982-5-yukuai1@huaweicloud.com
stop_sync_thread() will interrupt md_do_sync(), and md_do_sync() must
set MD_RECOVERY_DONE, so that follow up md_check_recovery() will
unregister sync_thread, clear MD_RECOVERY_RUNNING and wake up
stop_sync_thread().
If MD_RECOVERY_WAIT is set or the array is read-only, md_do_sync() will
return without setting MD_RECOVERY_DONE, and after commit f52f5c71f3
("md: fix stopping sync thread"), dm-raid switch from
md_reap_sync_thread() to stop_sync_thread() to unregister sync_thread
from md_stop() and md_stop_writes(), causing the test
shell/lvconvert-raid-reshape.sh hang.
We shouldn't switch back to md_reap_sync_thread() because it's
problematic in the first place. Fix the problem by making sure
md_do_sync() will set MD_RECOVERY_DONE.
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Closes: https://lore.kernel.org/all/ece2b06f-d647-6613-a534-ff4c9bec1142@redhat.com/
Fixes: d5d885fd51 ("md: introduce new personality funciton start()")
Fixes: 5fd6c1dce0 ("[PATCH] md: allow checkpoint of recovery with version-1 superblock")
Fixes: f52f5c71f3 ("md: fix stopping sync thread")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240201092559.910982-4-yukuai1@huaweicloud.com
Usually if the array is not read-write, md_check_recovery() won't
register new sync_thread in the first place. And if the array is
read-write and sync_thread is registered, md_set_readonly() will
unregister sync_thread before setting the array read-only. md/raid
follow this behavior hence there is no problem.
After commit f52f5c71f3 ("md: fix stopping sync thread"), following
hang can be triggered by test shell/integrity-caching.sh:
1) array is read-only. dm-raid update super block:
rs_update_sbs
ro = mddev->ro
mddev->ro = 0
-> set array read-write
md_update_sb
2) register new sync thread concurrently.
3) dm-raid set array back to read-only:
rs_update_sbs
mddev->ro = ro
4) stop the array:
raid_dtr
md_stop
stop_sync_thread
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
md_wakeup_thread_directly(mddev->sync_thread);
wait_event(..., !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
5) sync thread done:
md_do_sync
set_bit(MD_RECOVERY_DONE, &mddev->recovery);
md_wakeup_thread(mddev->thread);
6) daemon thread can't unregister sync thread:
md_check_recovery
if (!md_is_rdwr(mddev) &&
!test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))
return;
-> -> MD_RECOVERY_RUNNING can't be cleared, hence step 4 hang;
The root cause is that dm-raid manipulate 'mddev->ro' by itself,
however, dm-raid really should stop sync thread before setting the
array read-only. Unfortunately, I need to read more code before I
can refacter the handler of 'mddev->ro' in dm-raid, hence let's fix
the problem the easy way for now to prevent dm-raid regression.
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Closes: https://lore.kernel.org/all/9801e40-8ac7-e225-6a71-309dcf9dc9aa@redhat.com/
Fixes: ecbfb9f118 ("dm raid: add raid level takeover support")
Fixes: f52f5c71f3 ("md: fix stopping sync thread")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240201092559.910982-3-yukuai1@huaweicloud.com
mddev_suspend() never stop sync_thread, hence it doesn't make sense to
ignore suspended array in md_check_recovery(), which might cause
sync_thread can't be unregistered.
After commit f52f5c71f3 ("md: fix stopping sync thread"), following
hang can be triggered by test shell/integrity-caching.sh:
1) suspend the array:
raid_postsuspend
mddev_suspend
2) stop the array:
raid_dtr
md_stop
__md_stop_writes
stop_sync_thread
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
md_wakeup_thread_directly(mddev->sync_thread);
wait_event(..., !test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
3) sync thread done:
md_do_sync
set_bit(MD_RECOVERY_DONE, &mddev->recovery);
md_wakeup_thread(mddev->thread);
4) daemon thread can't unregister sync thread:
md_check_recovery
if (mddev->suspended)
return; -> return directly
md_read_sync_thread
clear_bit(MD_RECOVERY_RUNNING, &mddev->recovery);
-> MD_RECOVERY_RUNNING can't be cleared, hence step 2 hang;
This problem is not just related to dm-raid, fix it by ignoring
suspended array in md_check_recovery(). And follow up patches will
improve dm-raid better to frozen sync thread during suspend.
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Closes: https://lore.kernel.org/all/8fb335e-6d2c-dbb5-d7-ded8db5145a@redhat.com/
Fixes: 68866e425b ("MD: no sync IO while suspended")
Fixes: f52f5c71f3 ("md: fix stopping sync thread")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240201092559.910982-2-yukuai1@huaweicloud.com
Commit c92a6b5d63 ("scsi: core: Query VPD size before getting full
page") removed the logic which checks whether a VPD page is present on
the supported pages list before asking for the page itself. That was
done because SPC helpfully states "The Supported VPD Pages VPD page
list may or may not include all the VPD pages that are able to be
returned by the device server". Testing had revealed a few devices
that supported some of the 0xBn pages but didn't actually list them in
page 0.
Julian Sikorski bisected a problem with his drive resetting during
discovery to the commit above. As it turns out, this particular drive
firmware will crash if we attempt to fetch page 0xB9.
Various approaches were attempted to work around this. In the end,
reinstating the logic that consults VPD page 0 before fetching any
other page was the path of least resistance. A firmware update for the
devices which originally compelled us to remove the check has since
been released.
Link: https://lore.kernel.org/r/20240214221411.2888112-1-martin.petersen@oracle.com
Fixes: c92a6b5d63 ("scsi: core: Query VPD size before getting full page")
Cc: stable@vger.kernel.org
Cc: Bart Van Assche <bvanassche@acm.org>
Reported-by: Julian Sikorski <belegdol@gmail.com>
Tested-by: Julian Sikorski <belegdol@gmail.com>
Reviewed-by: Lee Duncan <lee.duncan@suse.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull networking fixes from Jakub Kicinski:
"Including fixes from can, wireless and netfilter.
Current release - regressions:
- af_unix: fix task hung while purging oob_skb in GC
- pds_core: do not try to run health-thread in VF path
Current release - new code bugs:
- sched: act_mirred: don't zero blockid when net device is being
deleted
Previous releases - regressions:
- netfilter:
- nat: restore default DNAT behavior
- nf_tables: fix bidirectional offload, broken when unidirectional
offload support was added
- openvswitch: limit the number of recursions from action sets
- eth: i40e: do not allow untrusted VF to remove administratively set
MAC address
Previous releases - always broken:
- tls: fix races and bugs in use of async crypto
- mptcp: prevent data races on some of the main socket fields, fix
races in fastopen handling
- dpll: fix possible deadlock during netlink dump operation
- dsa: lan966x: fix crash when adding interface under a lag when some
of the ports are disabled
- can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock
Misc:
- a handful of fixes and reliability improvements for selftests
- fix sysfs documentation missing net/ in paths
- finish the work of squashing the missing MODULE_DESCRIPTION()
warnings in networking"
* tag 'net-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (92 commits)
net: fill in MODULE_DESCRIPTION()s for missing arcnet
net: fill in MODULE_DESCRIPTION()s for mdio_devres
net: fill in MODULE_DESCRIPTION()s for ppp
net: fill in MODULE_DESCRIPTION()s for fddik/skfp
net: fill in MODULE_DESCRIPTION()s for plip
net: fill in MODULE_DESCRIPTION()s for ieee802154/fakelb
net: fill in MODULE_DESCRIPTION()s for xen-netback
net: ravb: Count packets instead of descriptors in GbEth RX path
pppoe: Fix memory leak in pppoe_sendmsg()
net: sctp: fix skb leak in sctp_inq_free()
net: bcmasp: Handle RX buffer allocation failure
net-timestamp: make sk_tskey more predictable in error path
selftests: tls: increase the wait in poll_partial_rec_async
ice: Add check for lport extraction to LAG init
netfilter: nf_tables: fix bidirectional offload regression
netfilter: nat: restore default DNAT behavior
netfilter: nft_set_pipapo: fix missing : in kdoc
igc: Remove temporary workaround
igb: Fix string truncation warnings in igb_set_fw_version
can: netlink: Fix TDCO calculation using the old data bittiming
...
Pull xen fixes from Juergen Gross:
"Fixes and simple cleanups:
- use a proper flexible array instead of a one-element array in order
to avoid array-bounds sanitizer errors
- add NULL pointer checks after allocating memory
- use memdup_array_user() instead of open-coding it
- fix a rare race condition in Xen event channel allocation code
- make struct bus_type instances const
- make kerneldoc inline comments match reality"
* tag 'for-linus-6.8a-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: close evtchn after mapping cleanup
xen/gntalloc: Replace UAPI 1-element array
xen: balloon: make balloon_subsys const
xen: pcpu: make xen_pcpu_subsys const
xen/privcmd: Use memdup_array_user() in alloc_ioreq()
x86/xen: Add some null pointer checking to smp.c
xen/xenbus: document will_handle argument for xenbus_watch_path()
Gfx11 debug flags mask is currently set with an implicit assumption that
no other mqd update flags exist. This needs to be fixed with newly
introduced flag UPDATE_FLAG_IS_GWS by the previous patch.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In certain cooperative group dispatch scenarios the default SPI resource
allocation may cause reduced per-CU workgroup occupancy. Set
COMPUTE_RESOURCE_LIMITS.FORCE_SIMD_DIST=1 to mitigate soft hang
scenarions.
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Suggested-by: Joseph Greathouse <Joseph.Greathouse@amd.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The dcn30_get_gamcor_current() function is responsible for determining
the current gamma correction mode used by the display controller.
However, the 'mode' variable, which stores the gamma correction mode,
was not initialized before its first usage, leading to an uninitialized
symbol error.
Thus initializes the 'mode' variable with a default value of LUT_BYPASS
before the conditional statements in the function, improves code clarity
and stability, ensuring correct behavior of the
dcn30_get_gamcor_current() function in determining the gamma correction
mode.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn30/dcn30_dpp_cm.c:77 dpp30_get_gamcor_current() error: uninitialized symbol 'mode'.
Fixes: 03f54d7d34 ("drm/amd/display: Add DCN3 DPP")
Cc: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Suggested-by: Roman Li <roman.li@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As part of a cleanup amdgpu_dm_fini() function, which is typically
called when a device is being shut down or a driver is being unloaded
The below error message suggests that there is a potential null pointer
dereference issue with adev->dm.dc.
In the below, line of code where adev->dm.dc is used without a preceding
null check:
for (i = 0; i < adev->dm.dc->caps.max_links; i++) {
To fix this issue, add a null check for adev->dm.dc before this line.
Reported by smatch:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:1959 amdgpu_dm_fini() error: we previously assumed 'adev->dm.dc' could be null (see line 1943)
Fixes: 006c26a0f1 ("drm/amd/display: Fix crash on device remove/driver unload")
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
commit ab4750332d ("drm/amdgpu/sdma5.2: add begin/end_use ring
callbacks") caused GFXOFF control to be used more heavily and the
codepath that was removed from commit 0dee726395 ("drm/amd: flush any
delayed gfxoff on suspend entry") now can be exercised at suspend again.
Users report that by using GNOME to suspend the lockscreen trigger will
cause SDMA traffic and the system can deadlock.
This reverts commit 0dee726395.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Fixes: ab4750332d ("drm/amdgpu/sdma5.2: add begin/end_use ring callbacks")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
commit 5095d54181 ("drm/amd: Evict resources during PM ops prepare()
callback") intentionally moved the eviction of resources to earlier in
the suspend process, but this introduced a subtle change that it occurs
before adev->in_s0ix or adev->in_s3 are set. This meant that APUs
actually started to evict resources at suspend time as well.
Explicitly set s0ix or s3 in the prepare() stage, and unset them if the
prepare() stage failed.
v2: squash in warning fix from Stephen Rothwell
Reported-by: Jürg Billeter <j@bitron.ch>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3132#note_2271038
Fixes: 5095d54181 ("drm/amd: Evict resources during PM ops prepare() callback")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
when 'find_dcfclk_for_voltage()' function is looping over
VG_NUM_SOC_VOLTAGE_LEVELS (which is 8), but the size of the DcfClocks
array is VG_NUM_DCFCLK_DPM_LEVELS (which is 7).
When the loop variable i reaches 7, the function tries to access
clock_table->DcfClocks[7]. However, since the size of the DcfClocks
array is 7, the valid indices are 0 to 6. Index 7 is beyond the size of
the array, leading to a buffer overflow.
Reported by smatch & thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/clk_mgr/dcn301/vg_clk_mgr.c:550 find_dcfclk_for_voltage() error: buffer overflow 'clock_table->DcfClocks' 7 <= 7
Fixes: 3a83e4e64b ("drm/amd/display: Add dcn3.01 support to DC (v2)")
Cc: Roman Li <Roman.Li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'max_chunks_fbc_mode' is only declared and assigned a value under a
specific condition in the following lines:
if (data->fbc_en[i] == 1) {
max_chunks_fbc_mode = 128 - dmif_chunk_buff_margin;
}
If 'data->fbc_en[i]' is not equal to 1 for any i, max_chunks_fbc_mode
will not be initialized if it's used outside of this for loop.
Ensure that 'max_chunks_fbc_mode' is properly initialized before it's
used. Initialize it to a default value right after its declaration to
ensure that it gets a value assigned under all possible control flow
paths.
Thus fixing the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dce_calcs.c:914 calculate_bandwidth() error: uninitialized symbol 'max_chunks_fbc_mode'.
drivers/gpu/drm/amd/amdgpu/../display/dc/basics/dce_calcs.c:917 calculate_bandwidth() error: uninitialized symbol 'max_chunks_fbc_mode'.
Fixes: 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
wait_time_microsec = max(wait_time_microsec, (uint32_t)
DPIA_CLK_SYNC_DELAY);
Above line is trying to assign the maximum value between
'wait_time_microsec' and 'DPIA_CLK_SYNC_DELAY' to wait_time_microsec.
However, 'wait_time_microsec' has not been assigned a value before this
line, initialize 'wait_time_microsec' at the point of declaration.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_dp_training_dpia.c:697 dpia_training_eq_non_transparent() error: uninitialized symbol 'wait_time_microsec'.
Fixes: 630168a973 ("drm/amd/display: move dp link training logic to link_dp_training")
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These ANDs should be ORs or it will lead to a NULL dereference.
Fixes: fb5a3d0370 ("drm/amd/display: Add NULL test for 'timing generator' in 'dcn21_set_pipe()'")
Fixes: 886571d217 ("drm/amd/display: Fix 'panel_cntl' could be null in 'dcn21_set_backlight_level()'")
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We have observed that there are quite a number of PSR-SU panels on the
market that are unable to keep up with what user space throws at them,
resulting in hangs and random black screens. So, make damage clips
support configurable and disable it by default for PSR-SU displays.
Cc: stable@vger.kernel.org
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In commit 4356e9f841 ("work around gcc bugs with 'asm goto' with
outputs") I did the gcc workaround unconditionally, because the cause of
the bad code generation wasn't entirely clear.
In the meantime, Jakub Jelinek debugged the issue, and has come up with
a fix in gcc [2], which also got backported to the still maintained
branches of gcc-11, gcc-12 and gcc-13.
Note that while the fix technically wasn't in the original gcc-14
branch, Jakub says:
"while it is true that no GCC 14 snapshots until today (or whenever the
fix will be committed) have the fix, for GCC trunk it is up to the
distros to use the latest snapshot if they use it at all and would
allow better testing of the kernel code without the workaround, so
that if there are other issues they won't be discovered years later.
Most userland code doesn't actually use asm goto with outputs..."
so we will consider gcc-14 to be fixed - if somebody is using gcc
snapshots of the gcc-14 before the fix, they should upgrade.
Note that while the bug goes back to gcc-11, in practice other gcc
changes seem to have effectively hidden it since gcc-12.1 as per a
bisect by Jakub. So even a gcc-14 snapshot without the fix likely
doesn't show actual problems.
Also, make the default 'asm_goto_output()' macro mark the asm as
volatile by hand, because of an unrelated gcc issue [1] where it doesn't
match the documented behavior ("asm goto is always volatile").
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=103979 [1]
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=113921 [2]
Link: https://lore.kernel.org/all/20240208220604.140859-1-seanjc@google.com/
Requested-by: Jakub Jelinek <jakub@redhat.com>
Cc: Uros Bizjak <ubizjak@gmail.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Andrew Pinski <quic_apinski@quicinc.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull devicetree fixes from Rob Herring:
- Improve devlink dependency parsing for DT graphs
- Fix devlink handling of io-channels dependencies
- Fix PCI addressing in marvell,prestera example
- A few schema fixes for property constraints
- Improve performance of DT unprobed devices kselftest
- Fix regression in DT_SCHEMA_FILES handling
- Fix compile error in unittest for !OF_DYNAMIC
* tag 'devicetree-fixes-for-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: ufs: samsung,exynos-ufs: Add size constraints on "samsung,sysreg"
of: property: Add in-ports/out-ports support to of_graph_get_port_parent()
of: property: Improve finding the supplier of a remote-endpoint property
of: property: Improve finding the consumer of a remote-endpoint property
net: marvell,prestera: Fix example PCI bus addressing
of: unittest: Fix compile in the non-dynamic case
of: property: fix typo in io-channels
dt-bindings: tpm: Drop type from "resets"
dt-bindings: display: nxp,tda998x: Fix 'audio-ports' constraints
dt-bindings: xilinx: replace Piyush Mehta maintainership
kselftest: dt: Stop relying on dirname to improve performance
dt-bindings: don't anchor DT_SCHEMA_FILES to bindings directory
Pull spi fixes from Mark Brown:
"A smallish collection of fixes for SPI, all driver specific, plus one
device ID addition for a new Intel part.
The ppc4xx isn't routinely covered by most of the automated testing so
there were some errors that were missed in some of the recent API
conversions, otherwise there's nothing super remarkable here"
* tag 'spi-fix-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi-mxs: Fix chipselect glitch
spi: intel-pci: Add support for Lunar Lake-M SPI serial flash
spi: omap2-mcspi: Revert FIFO support without DMA
spi: ppc4xx: Drop write-only variable
spi: ppc4xx: Fix fallout from rename in struct spi_bitbang
spi: ppc4xx: Fix fallout from include cleanup
spi: spi-ppc4xx: include missing platform_device.h
spi: imx: fix the burst length at DMA mode and CPU mode
Pull regmap test fixes from Mark Brown:
"Guenter runs a lot of KUnit tests so noticed that there were a couple
of the regmap tests, including the newly added noinc test, which could
show spurious failures due to the use of randomly generated test
values. These changes handle the randomly generated data properly"
* tag 'regmap-fix-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: kunit: Ensure that changed bytes are actually different
regmap: kunit: fix raw noinc write test wrapping
Pull HID fixes from Jiri Kosina:
- fix for 'MSC_SERIAL = 0' corner case handling in wacom driver (Jason
Gerecke)
- ACPI S3 suspend/resume fix for intel-ish-hid (Even Xu)
- race condition fix preventing Wacom driver from losing events shortly
after initialization (Jason Gerecke)
- fix preventing certain Logitech HID++ devices from spamming kernel
log (Oleksandr Natalenko)
* tag 'hid-for-linus-2024021501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: wacom: generic: Avoid reporting a serial of '0' to userspace
HID: Intel-ish-hid: Ishtp: Fix sensor reads after ACPI S3 suspend
HID: multitouch: Add required quirk for Synaptics 0xcddc device
HID: wacom: Do not register input devices until after hid_hw_start
HID: logitech-hidpp: Do not flood kernel log
The brute force iommu_flush_iotlb_all() was good enough for unmap, but
in some cases a map operation could require removing a table pte entry
to replace with a block entry. This also requires tlb invalidation.
Missing this was resulting an obscure iova fault on what should be a
valid buffer address.
Thanks to Robin Murphy for helping me understand the cause of the fault.
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: stable@vger.kernel.org
Fixes: b145c6e65e ("drm/msm: Add support to create a local pagetable")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/578117/
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-02-06 (igb, igc)
This series contains updates to igb and igc drivers.
Kunwu Chan adjusts firmware version string implementation to resolve
possible NULL pointer issue for igb.
Sasha removes workaround on igc.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: Remove temporary workaround
igb: Fix string truncation warnings in igb_set_fw_version
====================
Link: https://lore.kernel.org/r/20240214180347.3219650-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Breno Leitao says:
====================
Fix MODULE_DESCRIPTION() for net (p6)
There are a few network modules left that misses MODULE_DESCRIPTION(),
causing a warnning when compiling with W=1. Example:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/net/arcnet/....
This last patchset solves the problem for all the missing driver. It is
not expect to see any warning for the driver/net and net/ directory once
all these patches have landed.
v1: https://lore.kernel.org/all/20240213112122.404045-1-leitao@debian.org/
====================
Link: https://lore.kernel.org/r/20240214152741.670178-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The USB audio driver tries to retrieve MIDI jack name strings that can
be used for rawmidi substream names and sequencer port names, but its
checking is too strict: often the firmware provides the jack info for
unexpected directions, and then we miss the info although it's
present.
In this patch, the code to extract the jack info is changed to allow
both in and out directions in a single loop. That is, the former two
functions to obtain the descriptor pointers for jack in and out are
changed to a single function that returns iJack of the corresponding
jack ID, no matter which direction is used. It's a code
simplification at the same time as well as the fix.
Fixes: eb596e0fd1 ("ALSA: usb-audio: generate midi streaming substream names from jack names")
Link: https://lore.kernel.org/r/20240215153144.26047-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASoC: Fixes for v6.8
A relatively large set of fixes and quirk additions here but they're all
driver specific, people seem to be back into the swing of things after
the holidays. This is all driver specific and much of it fairly minor.
lld is now able to build ARMv4 and ARMv4T kernels, which means it can
generate thunks for those (__ARMv4PILongThunk_*, __ARMv4PILongBXThunk_*)
that can interfere with kallsyms table generation since they do not get
ignore like the corresponding ARMv5+ ones are:
Inconsistent kallsyms data
Try "make KALLSYMS_EXTRA_PASS=1" as a workaround
Replace the hardcoded list of thunk symbols with a more general regex that
covers this one along with future symbols that follow the same pattern.
Fixes: 5eb6e28043 ("ARM: 9289/1: Allow pre-ARMv5 builds with ld.lld 16.0.0 and newer")
Fixes: efe6e30680 ("kallsyms: fix nonconverging kallsyms table with lld")
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The buffer_pg variable needs to hold an order-5 allocation (32 x
PAGE_SIZE) which, under memory pressure may fail to be allocated. Deal
with that error condition properly to avoid doing a NULL pointer
de-reference in the subsequent call to dma_map_page().
In addition, the err_reclaim_tx error label in bcmasp_netif_init() needs
to ensure that the TX NAPI object is properly deleted, otherwise
unregister_netdev() will spin forever attempting to test and clear
the NAPI_STATE_HASHED bit.
Fixes: 490cb41200 ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Justin Chen <justin.chen@broadcom.com>
Link: https://lore.kernel.org/r/20240213173339.3438713-1-florian.fainelli@broadcom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains Netfilter fixes for net:
1) Missing : in kdoc field in nft_set_pipapo.
2) Restore default DNAT behavior When a DNAT rule is configured via
iptables with different port ranges, from Kyle Swenson.
3) Restore flowtable hardware offload for bidirectional flows
by setting NF_FLOW_HW_BIDIRECTIONAL flag, from Felix Fietkau.
netfilter pull request 24-02-15
* tag 'nf-24-02-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: fix bidirectional offload regression
netfilter: nat: restore default DNAT behavior
netfilter: nft_set_pipapo: fix missing : in kdoc
====================
Link: https://lore.kernel.org/r/20240214233818.7946-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Doug Anderson observed that ChromeOS crashes are being reported which
include failing allocations of order 7 during core dumps due to ptrace
allocating storage for regsets:
chrome: page allocation failure: order:7,
mode:0x40dc0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO),
nodemask=(null),cpuset=urgent,mems_allowed=0
...
regset_get_alloc+0x1c/0x28
elf_core_dump+0x3d8/0xd8c
do_coredump+0xeb8/0x1378
with further investigation showing that this is:
[ 66.957385] DOUG: Allocating 279584 bytes
which is the maximum size of the SVE regset. As Doug observes it is not
entirely surprising that such a large allocation of contiguous memory might
fail on a long running system.
The SVE regset is currently sized to hold SVE registers with a VQ of
SVE_VQ_MAX which is 512, substantially more than the architectural maximum
of 16 which we might see even in a system emulating the limits of the
architecture. Since we don't expose the size we tell the regset core
externally let's define ARCH_SVE_VQ_MAX with the actual architectural
maximum and use that for the regset, we'll still overallocate most of the
time but much less so which will be helpful even if the core is fixed to
not require contiguous allocations.
Specify ARCH_SVE_VQ_MAX in terms of the maximum value that can be written
into ZCR_ELx.LEN (where this is set in the hardware). For consistency
update the maximum SME vector length to be specified in the same style
while we are at it.
We could also teach the ptrace core about runtime discoverable regset sizes
but that would be a more invasive change and this is being observed in
practical systems.
Reported-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240213-arm64-sve-ptrace-regset-size-v2-1-c7600ca74b9b@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Marc Kleine-Budde says:
====================
pull-request: can 2024-02-14
this is a pull request of 3 patches for net/master.
the first patch is by Ziqi Zhao and targets the CAN J1939 protocol, it
fixes a potential deadlock by replacing the spinlock by an rwlock.
Oleksij Rempel's patch adds a missing spin_lock_bh() to prevent a
potential Use-After-Free in the CAN J1939's
setsockopt(SO_J1939_FILTER).
Maxime Jayat contributes a patch to fix the transceiver delay
compensation (TDCO) calculation, which is needed for higher CAN-FD bit
rates (usually 2Mbit/s).
* tag 'linux-can-fixes-for-6.8-20240214' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: netlink: Fix TDCO calculation using the old data bittiming
can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER)
can: j1939: prevent deadlock by changing j1939_socks_lock to rwlock
====================
Link: https://lore.kernel.org/r/20240214140348.2412776-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When SOF_TIMESTAMPING_OPT_ID is used to ambiguate timestamped datagrams,
the sk_tskey can become unpredictable in case of any error happened
during sendmsg(). Move increment later in the code and make decrement of
sk_tskey in error path. This solution is still racy in case of multiple
threads doing snedmsg() over the very same socket in parallel, but still
makes error path much more predictable.
Fixes: 09c2d251b7 ("net-timestamp: add key to disambiguate concurrent datagrams")
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240213110428.1681540-1-vadfed@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
It's currently possible to change the mesh ID when the
interface isn't yet in mesh mode, at the same time as
changing it into mesh mode. This leads to an overwrite
of data in the wdev->u union for the interface type it
currently has, causing cfg80211_change_iface() to do
wrong things when switching.
We could probably allow setting an interface to mesh
while setting the mesh ID at the same time by doing a
different order of operations here, but realistically
there's no userspace that's going to do this, so just
disallow changes in iftype when setting mesh ID.
Cc: stable@vger.kernel.org
Fixes: 29cbe68c51 ("cfg80211/mac80211: add mesh join/leave commands")
Reported-by: syzbot+dd4779978217b1973180@syzkaller.appspotmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
clang-16 warns about a cast between incompatible function types:
drivers/gpu/drm/xe/xe_range_fence.c:155:10: error: cast from 'void (*)(const void *)' to 'void (*)(struct xe_range_fence *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
155 | .free = (void (*)(struct xe_range_fence *rfence)) kfree,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Avoid this with a trivial helper function that calls kfree() here.
v2:
- s/* rfence/*rfence/ (Thomas)
Fixes: 845f64bdbf ("drm/xe: Introduce a range-fence utility")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240213095719.454865-1-arnd@kernel.org
(cherry picked from commit f2c9364db5)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The function xe_vm_prepare_vma was blindly accepting zero as the
number of fences and forwarded that to drm_exec_prepare_obj.
However, that leads to an out-of-bounds shift in the
dma_resv_reserve_fences() and while one could argue that the
dma_resv code should be robust against that, avoid attempting
to reserve zero fences.
Relevant stack trace:
[773.183188] ------------[ cut here ]------------
[773.183199] UBSAN: shift-out-of-bounds in ../include/linux/log2.h:57:13
[773.183241] shift exponent 64 is too large for 64-bit type 'long unsigned int'
[773.183254] CPU: 2 PID: 1816 Comm: xe_evict Tainted: G U 6.8.0-rc3-xe #1
[773.183256] Hardware name: ASUS System Product Name/PRIME Z690-P D4, BIOS 2014 10/14/2022
[773.183257] Call Trace:
[773.183258] <TASK>
[773.183260] dump_stack_lvl+0xaf/0xd0
[773.183266] dump_stack+0x10/0x20
[773.183283] ubsan_epilogue+0x9/0x40
[773.183286] __ubsan_handle_shift_out_of_bounds+0x10f/0x170
[773.183293] dma_resv_reserve_fences.cold+0x2b/0x48
[773.183295] ? ww_mutex_lock+0x3c/0x110
[773.183301] drm_exec_prepare_obj+0x45/0x60 [drm_exec]
[773.183313] xe_vm_prepare_vma+0x33/0x70 [xe]
[773.183375] xe_vma_destroy_unlocked+0x55/0xa0 [xe]
[773.183427] xe_vm_close_and_put+0x526/0x940 [xe]
Fixes: 2714d50936 ("drm/xe: Convert pagefaulting code to use drm_exec")
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240208132115.3132-1-thomas.hellstrom@linux.intel.com
(cherry picked from commit eb538b5574)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Test runners on debug kernels occasionally fail with:
# # RUN tls_err.13_aes_gcm.poll_partial_rec_async ...
# # tls.c:1883:poll_partial_rec_async:Expected poll(&pfd, 1, 5) (0) == 1 (1)
# # tls.c:1870:poll_partial_rec_async:Expected status (256) == 0 (0)
# # poll_partial_rec_async: Test failed at step #17
# # FAIL tls_err.13_aes_gcm.poll_partial_rec_async
# not ok 699 tls_err.13_aes_gcm.poll_partial_rec_async
# # FAILED: 698 / 699 tests passed.
This points to the second poll() in the test which is expected
to wait for the sender to send the rest of the data.
Apparently under some conditions that doesn't happen within 5ms,
bump the timeout to 20ms.
Fixes: 23fcb62bc1 ("selftests: tls: add tests for poll behavior")
Link: https://lore.kernel.org/r/20240213142055.395564-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johannes Berg says:
====================
Valentine's day edition, with just few fixes because
that's how we love it ;-)
iwlwifi:
- correct A3 in A-MSDUs
- fix crash when operating as AP and running out of station
slots to use
- clear link ID to correct some later checks against it
- fix error codes in SAR table loading
- fix error path in PPAG table read
mac80211:
- reload a pointer after SKB may have changed
(only in certain monitor inject mode scenarios)
* tag 'wireless-2024-02-14' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: mvm: fix a crash when we run out of stations
wifi: iwlwifi: uninitialized variable in iwl_acpi_get_ppag_table()
wifi: iwlwifi: Fix some error codes
wifi: iwlwifi: clear link_id in time_event
wifi: iwlwifi: mvm: use correct address 3 in A-MSDU
wifi: mac80211: reload info pointer in ieee80211_tx_dequeue()
====================
Link: https://lore.kernel.org/r/20240214184326.132813-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If we hit CQ ring overflow when attempting to post a multishot accept
completion, we don't properly save the result or return code. This
results in losing the accepted fd value.
Instead, we return the result from the poll operation that triggered
the accept retry. This is generally POLLIN|POLLPRI|POLLRDNORM|POLLRDBAND
which is 0xc3, or 195, which looks like a valid file descriptor, but it
really has no connection to that.
Handle this like we do for other multishot completions - assign the
result, and return IOU_STOP_MULTISHOT to cancel any further completions
from this request when overflow is hit. This preserves the result, as we
should, and tells the application that the request needs to be re-armed.
Cc: stable@vger.kernel.org
Fixes: 515e269612 ("io_uring: revert "io_uring fix multishot accept ordering"")
Link: https://github.com/axboe/liburing/issues/1062
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull MIPS fixes from Thomas Bogendoerfer:
- Fix for broken ipv6 checksums
- Fix handling of exceptions in delay slots
* tag 'mips-fixes_6.8_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mm/memory: Use exception ip to search exception tables
MIPS: Clear Cause.BD in instruction_pointer_set
ptrace: Introduce exception_ip arch hook
MIPS: Add 'memory' clobber to csum_ipv6_magic() inline assembler
Pull landlock test fixes from Mickaël Salaün:
"Fix build issues for tests, and improve test compatibility"
* tag 'landlock-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Fix capability for net_test
selftests/landlock: Fix fs_test build with old libc
selftests/landlock: Fix net_test build with old libc
Pull btrfs fixes from David Sterba:
"A few regular fixes and one fix for space reservation regression since
6.7 that users have been reporting:
- fix over-reservation of metadata chunks due to not keeping proper
balance between global block reserve and delayed refs reserve; in
practice this leaves behind empty metadata block groups, the
workaround is to reclaim them by using the '-musage=1' balance
filter
- other space reservation fixes:
- do not delete unused block group if it may be used soon
- do not reserve space for checksums for NOCOW files
- fix extent map assertion failure when writing out free space inode
- reject encoded write if inode has nodatasum flag set
- fix chunk map leak when loading block group zone info"
* tag 'for-6.8-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: don't refill whole delayed refs block reserve when starting transaction
btrfs: zoned: fix chunk map leak when loading block group zone info
btrfs: reject encoded write if inode has nodatasum flag set
btrfs: don't reserve space for checksums when writing to nocow files
btrfs: add new unused block groups to the list of unused block groups
btrfs: do not delete unused block group if it may be used soon
btrfs: add and use helper to check if block group is used
btrfs: don't drop extent_map for free space inode on write error
Pull KUnit fix from Shuah Khan:
"One important fix to unregister kunit_bus when KUnit module is
unloaded.
Not doing so causes an error when KUnit module tries to re-register
the bus when it gets reloaded"
* tag 'linux_kselftest-kunit-fixes-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: device: Unregister the kunit_bus on shutdown
Commit 8f84780b84 ("netfilter: flowtable: allow unidirectional rules")
made unidirectional flow offload possible, while completely ignoring (and
breaking) bidirectional flow offload for nftables.
Add the missing flag that was left out as an exercise for the reader :)
Cc: Vlad Buslov <vladbu@nvidia.com>
Fixes: 8f84780b84 ("netfilter: flowtable: allow unidirectional rules")
Reported-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When a DNAT rule is configured via iptables with different port ranges,
iptables -t nat -A PREROUTING -p tcp -d 10.0.0.2 -m tcp --dport 32000:32010
-j DNAT --to-destination 192.168.0.10:21000-21010
we seem to be DNATing to some random port on the LAN side. While this is
expected if --random is passed to the iptables command, it is not
expected without passing --random. The expected behavior (and the
observed behavior prior to the commit in the "Fixes" tag) is the traffic
will be DNAT'd to 192.168.0.10:21000 unless there is a tuple collision
with that destination. In that case, we expect the traffic to be
instead DNAT'd to 192.168.0.10:21001, so on so forth until the end of
the range.
This patch intends to restore the behavior observed prior to the "Fixes"
tag.
Fixes: 6ed5943f87 ("netfilter: nat: remove l4 protocol port rovers")
Signed-off-by: Kyle Swenson <kyle.swenson@est.tech>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add missing : in kdoc field names.
Fixes: 8683f4b995 ("nft_set_pipapo: Prepare for vectorised implementation: helpers")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
get_line() does not trim the leading spaces, but the
parse_source_files() expects to get lines with source files paths where
the first space occurs after the file path.
Fixes: 70f30cfe5b ("modpost: use read_text_file() and get_line() for reading text files")
Signed-off-by: Radek Krejci <radek.krejci@oracle.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
According to the Intel datasheets, software must reset the block
buffer index twice for block process call transactions: once before
writing the outgoing data to the buffer, and once again before
reading the incoming data from the buffer.
The driver is currently missing the second reset, causing the wrong
portion of the block buffer to be read.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reported-by: Piotr Zakowski <piotr.zakowski@intel.com>
Closes: https://lore.kernel.org/linux-i2c/20240213120553.7b0ab120@endymion.delvare/
Fixes: 315cd67c94 ("i2c: i801: Add Block Write-Block Read Process Call support")
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
On powerpc, it is possible to compile test both the new apple (arm) and
old pasemi (powerpc) drivers for the i2c hardware at the same time,
which leads to a warning about linking the same object file twice:
scripts/Makefile.build:244: drivers/i2c/busses/Makefile: i2c-pasemi-core.o is added to multiple modules: i2c-apple i2c-pasemi
Rework the driver to have an explicit helper module, letting Kbuild
take care of whether this should be built-in or a loadable driver.
Fixes: 9bc5f4f660 ("i2c: pasemi: Split pci driver to its own file")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
security_setselfattr() has an integer overflow bug that leads to
out-of-bounds access when userspace provides bogus input:
`lctx->ctx_len + sizeof(*lctx)` is checked against `lctx->len` (and,
redundantly, also against `size`), but there are no checks on
`lctx->ctx_len`.
Therefore, userspace can provide an `lsm_ctx` with `->ctx_len` set to a
value between `-sizeof(struct lsm_ctx)` and -1, and this bogus `->ctx_len`
will then be passed to an LSM module as a buffer length, causing LSM
modules to perform out-of-bounds accesses.
The following reproducer will demonstrate this under ASAN (if AppArmor is
loaded as an LSM):
```
struct lsm_ctx {
uint64_t id;
uint64_t flags;
uint64_t len;
uint64_t ctx_len;
char ctx[];
};
int main(void) {
size_t size = sizeof(struct lsm_ctx);
struct lsm_ctx *ctx = malloc(size);
ctx->id = 104/*LSM_ID_APPARMOR*/;
ctx->flags = 0;
ctx->len = size;
ctx->ctx_len = -sizeof(struct lsm_ctx);
syscall(
460/*__NR_lsm_set_self_attr*/,
/*attr=*/ 100/*LSM_ATTR_CURRENT*/,
/*ctx=*/ ctx,
/*size=*/ size,
/*flags=*/ 0
);
}
```
Fixes: a04a119808 ("LSM: syscalls for current process attributes")
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subj tweak, removed ref to ASAN splat that isn't included]
Signed-off-by: Paul Moore <paul@paul-moore.com>
It has been observed that some USB/UAS devices return generic properties
hardcoded in firmware for mode pages for a period of time after a device
has been discovered. The reported properties are either garbage or they do
not accurately reflect the characteristics of the physical storage device
attached in the case of a bridge.
Prior to commit 1e029397d1 ("scsi: sd: Reorganize DIF/DIX code to
avoid calling revalidate twice") we would call revalidate several
times during device discovery. As a result, incorrect values would
eventually get replaced with ones accurately describing the attached
storage. When we did away with the redundant revalidate pass, several
cases were reported where devices reported nonsensical values or would
end up in write-protected state.
An initial attempt at addressing this issue involved introducing a
delayed second revalidate invocation. However, this approach still
left some devices reporting incorrect characteristics.
Tasos Sahanidis debugged the problem further and identified that
introducing a READ operation prior to MODE SENSE fixed the problem and that
it wasn't a timing issue. Issuing a READ appears to cause the devices to
update their state to reflect the actual properties of the storage
media. Device properties like vendor, model, and storage capacity appear to
be correctly reported from the get-go. It is unclear why these devices
defer populating the remaining characteristics.
Match the behavior of a well known commercial operating system and
trigger a READ operation prior to querying device characteristics to
force the device to populate the mode pages.
The additional READ is triggered by a flag set in the USB storage and
UAS drivers. We avoid issuing the READ for other transport classes
since some storage devices identify Linux through our particular
discovery command sequence.
Link: https://lore.kernel.org/r/20240213143306.2194237-1-martin.petersen@oracle.com
Fixes: 1e029397d1 ("scsi: sd: Reorganize DIF/DIX code to avoid calling revalidate twice")
Cc: stable@vger.kernel.org
Reported-by: Tasos Sahanidis <tasos@tasossah.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Tasos Sahanidis <tasos@tasossah.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
PHY_CONTROL register works as defined in the IEEE 802.3 specification
(IEEE 802.3-2008 22.2.4.1). Tidy up the temporary workaround.
User impact: PHY can now be powered down when the ethernet link is down.
Testing hints: ip link set down <device> (or just disconnect the
ethernet cable).
Oldest tested NVM version is: 1045:740.
Fixes: 5586838fe9 ("igc: Add code for PHY support")
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Commit 1978d3ead8 ("intel: fix string truncation warnings")
fixes '-Wformat-truncation=' warnings in igb_main.c by using kasprintf.
drivers/net/ethernet/intel/igb/igb_main.c:3092:53: warning：‘%d’ directive output may be truncated writing between 1 and 5 bytes into a region of size between 1 and 13 [-Wformat-truncation=]
3092 | "%d.%d, 0x%08x, %d.%d.%d",
| ^~
drivers/net/ethernet/intel/igb/igb_main.c:3092:34: note：directive argument in the range [0, 65535]
3092 | "%d.%d, 0x%08x, %d.%d.%d",
| ^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/ethernet/intel/igb/igb_main.c:3092:34: note：directive argument in the range [0, 65535]
drivers/net/ethernet/intel/igb/igb_main.c:3090:25: note：‘snprintf’ output between 23 and 43 bytes into a destination of size 32
kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure.
Fix this warning by using a larger space for adapter->fw_version,
and then fall back and continue to use snprintf.
Fixes: 1978d3ead8 ("intel: fix string truncation warnings")
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Cc: Kunwu Chan <kunwu.chan@hotmail.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
KVM selftests fixes/cleanups (and one KVM x86 cleanup) for 6.8:
- Remove redundant newlines from error messages.
- Delete an unused variable in the AMX test (which causes build failures when
compiling with -Werror).
- Fail instead of skipping tests if open(), e.g. of /dev/kvm, fails with an
error code other than ENOENT (a Hyper-V selftest bug resulted in an EMFILE,
and the test eventually got skipped).
- Fix TSC related bugs in several Hyper-V selftests.
- Fix a bug in the dirty ring logging test where a sem_post() could be left
pending across multiple runs, resulting in incorrect synchronization between
the main thread and the vCPU worker thread.
- Relax the dirty log split test's assertions on 4KiB mappings to fix false
positives due to the number of mappings for memslot 0 (used for code and
data that is NOT being dirty logged) changing, e.g. due to NUMA balancing.
- Have KVM's gtod_is_based_on_tsc() return "bool" instead of an "int" (the
function generates boolean values, and all callers treat the return value as
a bool).
KVM x86 fixes for 6.8:
- Make a KVM_REQ_NMI request while handling KVM_SET_VCPU_EVENTS if and only
if the incoming events->nmi.pending is non-zero. If the target vCPU is in
the UNITIALIZED state, the spurious request will result in KVM exiting to
userspace, which in turn causes QEMU to constantly acquire and release
QEMU's global mutex, to the point where the BSP is unable to make forward
progress.
- Fix a type (u8 versus u64) goof that results in pmu->fixed_ctr_ctrl being
incorrectly truncated, and ultimately causes KVM to think a fixed counter
has already been disabled (KVM thinks the old value is '0').
- Fix a stack leak in KVM_GET_MSRS where a failed MSR read from userspace
that is ultimately ignored due to ignore_msrs=true doesn't zero the output
as intended.
The bpf_doc script refers to the GPL as the "GNU Privacy License".
I strongly suspect that the author wanted to refer to the GNU General
Public License, under which the Linux kernel is released, as, to the
best of my knowledge, there is no license named "GNU Privacy License".
This patch corrects the license name in the script accordingly.
Fixes: 56a092c895 ("bpf: add script and prepare bpf.h for new helpers documentation")
Signed-off-by: Gianmarco Lusvardi <glusvardi@posteo.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20240213230544.930018-3-glusvardi@posteo.net
Creating sysfs files for all Cells caused a boot failure for linux-6.8-rc1 on
Apple M1, which (in downstream dts files) has multiple nvmem cells that use the
same byte address. This causes the device probe to fail with
[ 0.605336] sysfs: cannot create duplicate filename '/devices/platform/soc@200000000/2922bc000.efuse/apple_efuses_nvmem0/cells/efuse@a10'
[ 0.605347] CPU: 7 PID: 1 Comm: swapper/0 Tainted: G S 6.8.0-rc1-arnd-5+ #133
[ 0.605355] Hardware name: Apple Mac Studio (M1 Ultra, 2022) (DT)
[ 0.605362] Call trace:
[ 0.605365] show_stack+0x18/0x2c
[ 0.605374] dump_stack_lvl+0x60/0x80
[ 0.605383] dump_stack+0x18/0x24
[ 0.605388] sysfs_warn_dup+0x64/0x80
[ 0.605395] sysfs_add_bin_file_mode_ns+0xb0/0xd4
[ 0.605402] internal_create_group+0x268/0x404
[ 0.605409] sysfs_create_groups+0x38/0x94
[ 0.605415] devm_device_add_groups+0x50/0x94
[ 0.605572] nvmem_populate_sysfs_cells+0x180/0x1b0
[ 0.605682] nvmem_register+0x38c/0x470
[ 0.605789] devm_nvmem_register+0x1c/0x6c
[ 0.605895] apple_efuses_probe+0xe4/0x120
[ 0.606000] platform_probe+0xa8/0xd0
As far as I can tell, this is a problem for any device with multiple cells on
different bits of the same address. Avoid the issue by changing the file name
to include the first bit number.
Fixes: 0331c61194 ("nvmem: core: Expose cells through sysfs")
Link: https://github.com/AsahiLinux/linux/blob/bd0a1a7d4/arch/arm64/boot/dts/apple/t600x-dieX.dtsi#L156
Cc: <regressions@lists.linux.dev>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Rafał Miłecki <rafal@milecki.pl>
Cc: Chen-Yu Tsai <wenst@chromium.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <asahi@lists.linux.dev>
Cc: Sven Peter <sven@svenpeter.dev>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Eric Curtin <ecurtin@redhat.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20240209163454.98051-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jonathan writes:
IIO: 1st set of fixes for the 6.8 cycle
Usual mixed bag of issues introduced this cycle and fixes for long term
issues that have been identified recently + one case where I messed up
a merge resolution and dropped the build file changes.
Most important is the userspace ABI fix for the iio_modifier enum
where we accidentally added new entries in the middle rather than at
the end.
IIO Core
- Close a memory leak in an error path.
- Move LIGHT_UVA and LIGHT_UVB definitions to end of the iio_modifier
enum to avoid breaking older userspace. (not yet in a released kernel
thankfully).
adi,adis
- Fix a DMA buffer alignment issue that was missing in series that fixed
these across IIO.
adi,ad-sigma-delta
- Fix a DMA buffer alignment issue that was missing in series that fixed
these across IIO.
adi,ad4130
- Zero init remaining fields of clock init data.
- Only set GPIO control bits on pins that aren't in use for anything else.
adi,ad5933
- Fix an old bug due to type mismatch. This is a rare device so good to
get some new test coverage.
adi,ad7091r
- Use right variable for an error return code.
bosch,bma400
- Add missing CONFIG_REGMAP_I2C dependency.
bosch,bmp280:
- Add missing bmp085 ID to the SPI table to avoid mismatch with the
of_device_id table.
hid-sensors:
- Avoid returning an error for timestamp read back that succeeds.
pni,rm3100
- Check value read from RM31000_REG_TMRC register is valid before using
it. Hardening to avoid a real world issue seen on some faulty hardware.
st,st-sensors
- Fix a DMA buffer alignment issue that was missing in series that fixed
these across IIO.
ti,hdc3020
- Add missing Kconfig and Makefile entrees accidentally dropped when patches
were applied.
- Fix wrong temperature offset (negated)
* tag 'iio-fixes-for-6.8a' of http://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: adc: ad4130: only set GPIO_CTRL if pin is unused
iio: adc: ad4130: zero-initialize clock init data
iio: accel: bma400: Fix a compilation problem
iio: commom: st_sensors: ensure proper DMA alignment
iio: hid-sensor-als: Return 0 for HID_USAGE_SENSOR_TIME_TIMESTAMP
iio: move LIGHT_UVA and LIGHT_UVB to the end of iio_modifier
staging: iio: ad5933: fix type mismatch regression
iio: humidity: hdc3020: fix temperature offset
iio: adc: ad7091r8: Fix error code in ad7091r8_gpio_setup()
iio: adc: ad_sigma_delta: ensure proper DMA alignment
iio: imu: adis: ensure proper DMA alignment
iio: humidity: hdc3020: Add Makefile, Kconfig and MAINTAINERS entry
iio: imu: bno055: serdev requires REGMAP
iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC
iio: pressure: bmp280: Add missing bmp085 to SPI id table
iio: core: fix memleak in iio_device_register_sysfs
The following 3 locks would race against each other, causing the
deadlock situation in the Syzbot bug report:
- j1939_socks_lock
- active_session_list_lock
- sk_session_queue_lock
A reasonable fix is to change j1939_socks_lock to an rwlock, since in
the rare situations where a write lock is required for the linked list
that j1939_socks_lock is protecting, the code does not attempt to
acquire any more locks. This would break the circular lock dependency,
where, for example, the current thread already locks j1939_socks_lock
and attempts to acquire sk_session_queue_lock, and at the same time,
another thread attempts to acquire j1939_socks_lock while holding
sk_session_queue_lock.
NOTE: This patch along does not fix the unregister_netdevice bug
reported by Syzbot; instead, it solves a deadlock situation to prepare
for one or more further patches to actually fix the Syzbot bug, which
appears to be a reference counting problem within the j1939 codebase.
Reported-by: <syzbot+1591462f226d9cbf0564@syzkaller.appspotmail.com>
Signed-off-by: Ziqi Zhao <astrajoan@yahoo.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20230721162226.8639-1-astrajoan@yahoo.com
[mkl: remove unrelated newline change]
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
clang-16 warns about the mismatched prototypes for the devm_* callbacks:
drivers/net/ethernet/ti/cpts.c:691:12: error: cast from 'void (*)(struct clk_hw *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
691 | (void(*)(void *))clk_hw_unregister_mux,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/device.h:406:34: note: expanded from macro 'devm_add_action_or_reset'
406 | __devm_add_action_or_reset(dev, action, data, #action)
| ^~~~~~
drivers/net/ethernet/ti/cpts.c:703:12: error: cast from 'void (*)(struct device_node *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
703 | (void(*)(void *))of_clk_del_provider,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/device.h:406:34: note: expanded from macro 'devm_add_action_or_reset'
406 | __devm_add_action_or_reset(dev, action, data, #action)
Use separate helper functions for this instead, using the expected prototypes
with a void* argument.
Fixes: a3047a81ba ("net: ethernet: ti: cpts: add support for ext rftclk selection")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
clang-16 warns about a function pointer cast:
drivers/net/ethernet/brocade/bna/bnad.c:1995:4: error: cast from 'void (*)(struct delayed_work *)' to 'work_func_t' (aka 'void (*)(struct work_struct *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
1995 | (work_func_t)bnad_tx_cleanup);
drivers/net/ethernet/brocade/bna/bnad.c:2252:4: error: cast from 'void (*)(void *)' to 'work_func_t' (aka 'void (*)(struct work_struct *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
2252 | (work_func_t)(bnad_rx_cleanup));
The problem here is mixing up work_struct and delayed_work, which relies
the former being the first member of the latter.
Change the code to use consistent types here to address the warning and
make it more robust against workqueue interface changes.
Side note: the use of a delayed workqueue for cleaning up TX descriptors
is probably a bad idea since this introduces a noticeable delay. The
driver currently does not appear to use BQL, but if one wanted to add
that, this would have to be changed as well.
Fixes: 01b54b1451 ("bna: tx rx cleanup fix")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 67f562e3e1 ("net/smc: transfer fasync_list in case of fallback")
leaves the socket's fasync list pointer within a container socket as well.
When the latter is destroyed, '__sock_release()' warns about its non-empty
fasync list, which is a dangling pointer to previously freed fasync list
of an underlying TCP socket. Fix this spurious warning by nullifying
fasync list of a container socket.
Fixes: 67f562e3e1 ("net/smc: transfer fasync_list in case of fallback")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-02-12 (i40e)
This series contains updates to i40e driver only.
Ivan Vecera corrects the looping value used while waiting for queues to
be disabled as well as an incorrect mask being used for DCB
configuration.
Maciej resolves an issue related to XDP traffic; removing a double call to
i40e_pf_rxq_wait() and accounting for XDP rings when stopping rings.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Turning on CONFIG_DMA_API_DEBUG_SG results in the following warning:
DMA-API: mmci-pl18x 48220000.mmc: cacheline tracking EEXIST,
overlapping mappings aren't supported
WARNING: CPU: 1 PID: 51 at kernel/dma/debug.c:568
add_dma_entry+0x234/0x2f4
Modules linked in:
CPU: 1 PID: 51 Comm: kworker/1:2 Not tainted 6.1.28 #1
Hardware name: STMicroelectronics STM32MP257F-EV1 Evaluation Board (DT)
Workqueue: events_freezable mmc_rescan
Call trace:
add_dma_entry+0x234/0x2f4
debug_dma_map_sg+0x198/0x350
__dma_map_sg_attrs+0xa0/0x110
dma_map_sg_attrs+0x10/0x2c
sdmmc_idma_prep_data+0x80/0xc0
mmci_prep_data+0x38/0x84
mmci_start_data+0x108/0x2dc
mmci_request+0xe4/0x190
__mmc_start_request+0x68/0x140
mmc_start_request+0x94/0xc0
mmc_wait_for_req+0x70/0x100
mmc_send_tuning+0x108/0x1ac
sdmmc_execute_tuning+0x14c/0x210
mmc_execute_tuning+0x48/0xec
mmc_sd_init_uhs_card.part.0+0x208/0x464
mmc_sd_init_card+0x318/0x89c
mmc_attach_sd+0xe4/0x180
mmc_rescan+0x244/0x320
DMA API debug brings to light leaking dma-mappings as dma_map_sg and
dma_unmap_sg are not correctly balanced.
If an error occurs in mmci_cmd_irq function, only mmci_dma_error
function is called and as this API is not managed on stm32 variant,
dma_unmap_sg is never called in this error path.
Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Fixes: 46b723dd86 ("mmc: mmci: add stm32 sdmmc variant")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240207143951.938144-1-christophe.kerello@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
In ata ata_dev_power_set_standby(), check that the target device is not
sleeping. If it is, there is no need to do anything.
Fixes: aa3998dbeb ("ata: libata-scsi: Disable scsi device manage_system_start_stop")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
NPC transmit side mcam rules can use the pcifunc (in packet metadata
added by hardware) of transmitting device for mcam lookup similar to
the channel of receiving device at receive side.
The commit 18603683d7 ("octeontx2-af: Remove channel verification
while installing MCAM rules") removed the receive side channel
verification to save hardware MCAM filters while switching packets
across interfaces but missed removing transmit side checks.
This patch removes transmit side rules validation.
Fixes: 18603683d7 ("octeontx2-af: Remove channel verification while installing MCAM rules")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
clang-16 notices that srpt_qp_event() gets called through an incompatible
pointer here:
drivers/infiniband/ulp/srpt/ib_srpt.c:1815:5: error: cast from 'void (*)(struct ib_event *, struct srpt_rdma_ch *)' to 'void (*)(struct ib_event *, void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
1815 | = (void(*)(struct ib_event *, void*))srpt_qp_event;
Change srpt_qp_event() to use the correct prototype and adjust the
argument inside of it.
Fixes: a42d985bd5 ("ib_srpt: Initial SRP Target merge for v3.3-rc1")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240213100728.458348-1-arnd@kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The patch 51d9760799 ("ALSA: hda/realtek:
Add quirks for ASUS Zenbook 2022 Models") modified the entry 1043:1e2e
from "ASUS UM3402" to "ASUS UM6702RA/RC" and added another entry for
"ASUS UM3402" with 104e:1ee2.
The first entry was correct, while the new one corresponds to model
"ASUS UM6702RA/RC"
Fix the model names for both devices.
Fixes: 51d9760799 ("ALSA: hda/realtek: Add quirks for ASUS Zenbook 2022 Models")
Signed-off-by: Jean-Loïc Charroud <lagiraudiere+linux@free.fr>
Link: https://lore.kernel.org/r/1656546983.650349575.1707867732866.JavaMail.zimbra@free.fr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At W=2 dtc complains:
hifive-unmatched-a00.dts:120.10-238.4: Warning (interrupt_provider): /soc/i2c@10030000/pmic@58: Missing '#interrupt-cells' in interrupt provider
Add the missing property.
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
powerVM hypervisor updates the VPA fields with stolen time data.
It currently reports enqueue_dispatch_tb and ready_enqueue_tb for
this purpose. In linux these two fields are used to report the stolen time.
The VPA fields are updated at the TB frequency. On powerPC its mostly
set at 512Mhz. Hence this needs a conversion to ns when reporting it
back as rest of the kernel timings are in ns. This conversion is already
handled in tb_to_ns function. So use that function to report accurate
stolen time.
Observed this issue and used an Capped Shared Processor LPAR(SPLPAR) to
simplify the experiments. In all these cases, 100% VP Load is run using
stress-ng workload. Values of stolen time is in percentages as reported
by mpstat. With the patch values are close to expected.
6.8.rc1 +Patch
12EC/12VP 0.0 0.0
12EC/24VP 25.7 50.2
12EC/36VP 37.3 69.2
12EC/48VP 38.5 78.3
Fixes: 0e8a631328 ("powerpc/pseries: Implement CONFIG_PARAVIRT_TIME_ACCOUNTING")
Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240213052635.231597-1-sshegde@linux.ibm.com
Michael reported that we are seeing an ftrace bug on bootup when KASAN
is enabled and we are using -fpatchable-function-entry:
ftrace: allocating 47780 entries in 18 pages
ftrace-powerpc: 0xc0000000020b3d5c: No module provided for non-kernel address
------------[ ftrace bug ]------------
ftrace faulted on modifying
[<c0000000020b3d5c>] 0xc0000000020b3d5c
Initializing ftrace call sites
ftrace record flags: 0
(0)
expected tramp: c00000000008cef4
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at kernel/trace/ftrace.c:2180 ftrace_bug+0x3c0/0x424
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 6.5.0-rc3-00120-g0f71dcfb4aef #860
Hardware name: IBM pSeries (emulated by qemu) POWER9 (raw) 0x4e1202 0xf000005 of:SLOF,HEAD hv:linux,kvm pSeries
NIP: c0000000003aa81c LR: c0000000003aa818 CTR: 0000000000000000
REGS: c0000000033cfab0 TRAP: 0700 Not tainted (6.5.0-rc3-00120-g0f71dcfb4aef)
MSR: 8000000002021033 <SF,VEC,ME,IR,DR,RI,LE> CR: 28028240 XER: 00000000
CFAR: c0000000002781a8 IRQMASK: 3
...
NIP [c0000000003aa81c] ftrace_bug+0x3c0/0x424
LR [c0000000003aa818] ftrace_bug+0x3bc/0x424
Call Trace:
ftrace_bug+0x3bc/0x424 (unreliable)
ftrace_process_locs+0x5f4/0x8a0
ftrace_init+0xc0/0x1d0
start_kernel+0x1d8/0x484
With CONFIG_FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY=y and
CONFIG_KASAN=y, compiler emits nops in functions that it generates for
registering and unregistering global variables (unlike with -pg and
-mprofile-kernel where calls to _mcount() are not generated in those
functions). Those functions then end up in INIT_TEXT and EXIT_TEXT
respectively. We don't expect to see any profiled functions in
EXIT_TEXT, so ftrace_init_nop() assumes that all addresses that aren't
in the core kernel text belongs to a module. Since these functions do
not match that criteria, we see the above bug.
Address this by having ftrace ignore all locations in the text exit
sections of vmlinux.
Fixes: 0f71dcfb4a ("powerpc/ftrace: Add support for -fpatchable-function-entry")
Cc: stable@vger.kernel.org # v6.6+
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Reviewed-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240213175410.1091313-1-naveen@kernel.org
Commit e320a76db4 ("powerpc/cputable: Split cpu_specs[] out of
cputable.h") moved the cpu_specs to separate header files. Previously
PPC_FEATURE_BOOKE was enabled by CONFIG_PPC_BOOK3E_64. The definition in
cpu_specs_e500mc.h for PPC64 no longer enables PPC_FEATURE_BOOKE.
This breaks user space reading the ELF hwcaps and expect
PPC_FEATURE_BOOKE. Debugging an application with gdb is no longer
working on e5500/e6500 because the 64-bit detection relies on
PPC_FEATURE_BOOKE for Book-E.
Fixes: e320a76db4 ("powerpc/cputable: Split cpu_specs[] out of cputable.h")
Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: David Engraf <david.engraf@sysgo.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240207092758.1058893-1-david.engraf@sysgo.com
KASAN is seen to increase stack usage, to the point that it was reported
to lead to stack overflow on some 32-bit machines (see link).
To avoid overflows the stack size was doubled for KASAN builds in
commit 3e8635fb2e ("powerpc/kasan: Force thread size increase with
KASAN").
However with a 32KB stack size to begin with, the doubling leads to a
64KB stack, which causes build errors:
arch/powerpc/kernel/switch.S:249: Error: operand out of range (0x000000000000fe50 is not between 0xffffffffffff8000 and 0x0000000000007fff)
Although the asm could be reworked, in practice a 32KB stack seems
sufficient even for KASAN builds - the additional usage seems to be in
the 2-3KB range for a 64-bit KASAN build.
So only increase the stack for KASAN if the stack size is < 32KB.
Fixes: 18f14afe28 ("powerpc/64s: Increase default stack size to 32KB")
Reported-by: Spoorthy <spoorthy@linux.ibm.com>
Reported-by: Benjamin Gray <bgray@linux.ibm.com>
Reviewed-by: Benjamin Gray <bgray@linux.ibm.com>
Link: https://lore.kernel.org/linuxppc-dev/bug-207129-206035@https.bugzilla.kernel.org%2F/
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240212064244.3924505-1-mpe@ellerman.id.au
When also downgrading, check_version_upgrade() could pick a new version
greater than the latest supported version.
Fixes:
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This prevents going emergency read only when the user has specified
replicas_required > replicas.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Remove superfluous initialization of status variable in
nvmet_execute_admin_connect() and nvmet_execute_io_connect(), since it
will get overwritten by nvmet_copy_from_sgl().
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Initializing an eMMC that's connected via a 1-bit bus is current failing,
if the HW (DT) informs that 4-bit bus is supported. In fact this is a
regression, as we were earlier capable of falling back to 1-bit mode, when
switching to 4/8-bit bus failed. Therefore, let's restore the behaviour.
Log for Samsung eMMC 5.1 chip connected via 1bit bus (only D0 pin)
Before patch:
[134509.044225] mmc0: switch to bus width 4 failed
[134509.044509] mmc0: new high speed MMC card at address 0001
[134509.054594] mmcblk0: mmc0:0001 BGUF4R 29.1 GiB
[134509.281602] mmc0: switch to bus width 4 failed
[134509.282638] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.282657] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.284598] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.284602] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.284609] ldm_validate_partition_table(): Disk read failed.
[134509.286495] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.286500] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.288303] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.288308] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.289540] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.289544] Buffer I/O error on dev mmcblk0, logical block 0, async page read
[134509.289553] mmcblk0: unable to read partition table
[134509.289728] mmcblk0boot0: mmc0:0001 BGUF4R 31.9 MiB
[134509.290283] mmcblk0boot1: mmc0:0001 BGUF4R 31.9 MiB
[134509.294577] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[134509.295835] I/O error, dev mmcblk0, sector 0 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[134509.295841] Buffer I/O error on dev mmcblk0, logical block 0, async page read
After patch:
[134551.089613] mmc0: switch to bus width 4 failed
[134551.090377] mmc0: new high speed MMC card at address 0001
[134551.102271] mmcblk0: mmc0:0001 BGUF4R 29.1 GiB
[134551.113365] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21
[134551.114262] mmcblk0boot0: mmc0:0001 BGUF4R 31.9 MiB
[134551.114925] mmcblk0boot1: mmc0:0001 BGUF4R 31.9 MiB
Fixes: 577fb13199 ("mmc: rework selection of bus speed mode")
Cc: stable@vger.kernel.org
Signed-off-by: Ivan Semenov <ivan@semenov.dev>
Link: https://lore.kernel.org/r/20240206172845.34316-1-ivan@semenov.dev
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
xsk_build_skb() allocates a page and adds it to the skb via
skb_add_rx_frag() and specifies 0 for truesize. This leads to a warning
in skb_add_rx_frag() with CONFIG_DEBUG_NET enabled because size is
larger than truesize.
Increasing truesize requires to add the same amount to socket's
sk_wmem_alloc counter in order not to underflow the counter during
release in the destructor (sock_wfree()).
Pass the size of the allocated page as truesize to skb_add_rx_frag().
Add this mount to socket's sk_wmem_alloc counter.
Fixes: cf24f5a5fe ("xsk: add support for AF_XDP multi-buffer on Tx path")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20240202163221.2488589-1-bigeasy@linutronix.de
The ACPI in some SoundWire laptops has a spk-id-gpios property but
it points to the wrong Device node. This patch adds a workaround to
try to get the GPIO directly from the correct Device node.
If the attempt to get the GPIOs from the property fails, the workaround
looks for the SDCA node "AF01", which is where the GpioIo resource is
defined. If this exists, a spk-id-gpios mapping is added to that node
and then the GPIO is got from that node using the property.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240209111840.1543630-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The px30 has two spi controllers with two chip-selects each.
The num-cs property is specified as the total number of chip
selects a controllers has and is used since 2020 to find uses
of chipselects outside that range in the Rockchip spi driver.
Without the property set, the default is 1, so spi devices
using the second chipselect will not be created.
Fixes: eb1262e3cc ("spi: spi-rockchip: use num-cs property and ctlr->enable_gpiods")
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240119101656.965744-1-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Paolo Abeni says:
====================
selftests: net: more pmtu.sh fixes
The mentioned test is still flaky, unusally enough in 'fast'
environments.
Patch 2/2 [try to] address the existing issues, while patch 1/2
introduces more strict tests for the existing net helpers, to hopefully
prevent future pain.
====================
Link: https://lore.kernel.org/r/cover.1707731086.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The netdev CI is reporting failures for the pmtu test:
[ 115.929264] br0: port 2(vxlan_a) entered forwarding state
# 2024/02/08 17:33:22 socat[7871] E bind(7, {AF=10 [0000:0000:0000:0000:0000:0000:0000:0000]:50000}, 28): Address already in use
# 2024/02/08 17:33:22 socat[7877] E write(7, 0x5598fb6ff000, 8192): Connection refused
# TEST: IPv6, bridged vxlan4: PMTU exceptions [FAIL]
# File size 0 mismatches exepcted value in locally bridged vxlan test
The root cause is apparently a socket created by a previous iteration
of the relevant loop still lasting in LAST_ACK state.
Note that even the file size check is racy, the receiver process dumping
the file could still be running in background
Allow the listener to bound on the same local port via SO_REUSEADDR and
collect file output file size only after the listener completion.
Fixes: 136a1b434b ("selftests: net: test vxlan pmtu exceptions with tcp")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/4f51c11a1ce7ca7a4dabd926cffff63dadac9ba1.1707731086.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The helper waiting for a listener port can match any socket whose
hexadecimal representation of source or destination addresses
matches that of the given port.
Additionally, any socket state is accepted.
All the above can let the helper return successfully before the
relevant listener is actually ready, with unexpected results.
So far I could not find any related failure in the netdev CI, but
the next patch is going to make the critical event more easily
reproducible.
Address the issue matching the port hex only vs the relevant socket
field and additionally checking the socket state for TCP sockets.
Fixes: 3bdd9fd29c ("selftests/net: synchronize udpgro tests' tx and rx connection")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/192b3dbc443d953be32991d1b0ca432bd4c65008.1707731086.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mentioned test is failing in slow environments:
# SO_TXTIME ipv4 clock monotonic
# ./so_txtime: recv: timeout: Resource temporarily unavailable
not ok 1 selftests: net: so_txtime.sh # exit=1
Tuning the tolerance in the test binary is error-prone and doomed
to failures is slow-enough environment.
Just resort to suppress any error in such cases. Note to suppress
them we need first to refactor a bit the code moving it to explicit
error handling.
Fixes: af5136f950 ("selftests/net: SO_TXTIME with ETF and FQ")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/2142d9ed4b5c5aa07dd1b455779625d91b175373.1707730902.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The gro self-tests sends the packets to be aggregated with
multiple write operations.
When running is slow environment, it's hard to guarantee that
the GRO engine will wait for the last packet in an intended
train.
The above causes almost deterministic failures in our CI for
the 'large' test-case.
Address the issue explicitly ignoring failures for such case
in slow environments (KSFT_MACHINE_SLOW==true).
Fixes: 7d1575014a ("selftests/net: GRO coalesce test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/97d3ba83f5a2bfeb36f6bc0fb76724eb3dafb608.1707729403.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 28270e25c6 ("btrfs: always reserve space for delayed refs
when starting transaction") we started not only to reserve metadata space
for the delayed refs a caller of btrfs_start_transaction() might generate
but also to try to fully refill the delayed refs block reserve, because
there are several case where we generate delayed refs and haven't reserved
space for them, relying on the global block reserve. Relying too much on
the global block reserve is not always safe, and can result in hitting
-ENOSPC during transaction commits or worst, in rare cases, being unable
to mount a filesystem that needs to do orphan cleanup or anything that
requires modifying the filesystem during mount, and has no more
unallocated space and the metadata space is nearly full. This was
explained in detail in that commit's change log.
However the gap between the reserved amount and the size of the delayed
refs block reserve can be huge, so attempting to reserve space for such
a gap can result in allocating many metadata block groups that end up
not being used. After a recent patch, with the subject:
"btrfs: add new unused block groups to the list of unused block groups"
We started to add new block groups that are unused to the list of unused
block groups, to avoid having them around for a very long time in case
they are never used, because a block group is only added to the list of
unused block groups when we deallocate the last extent or when mounting
the filesystem and the block group has 0 bytes used. This is not a problem
introduced by the commit mentioned earlier, it always existed as our
metadata space reservations are, most of the time, pessimistic and end up
not using all the space they reserved, so we can occasionally end up with
one or two unused metadata block groups for a long period. However after
that commit mentioned earlier, we are just more pessimistic in the
metadata space reservations when starting a transaction and therefore the
issue is more likely to happen.
This however is not always enough because we might create unused metadata
block groups when reserving metadata space at a high rate if there's
always a gap in the delayed refs block reserve and the cleaner kthread
isn't triggered often enough or is busy with other work (running delayed
iputs, cleaning deleted roots, etc), not to mention the block group's
allocated space is only usable for a new block group after the transaction
used to remove it is committed.
A user reported that he's getting a lot of allocated metadata block groups
but the usage percentage of metadata space was very low compared to the
total allocated space, specially after running a series of block group
relocations.
So for now stop trying to refill the gap in the delayed refs block reserve
and reserve space only for the delayed refs we are expected to generate
when starting a transaction.
CC: stable@vger.kernel.org # 6.7+
Reported-by: Ivan Shapovalov <intelfx@intelfx.name>
Link: https://lore.kernel.org/linux-btrfs/9cdbf0ca9cdda1b4c84e15e548af7d7f9f926382.camel@intelfx.name/
Link: https://lore.kernel.org/linux-btrfs/CAL3q7H6802ayLHUJFztzZAVzBLJAGdFx=6FHNNy87+obZXXZpQ@mail.gmail.com/
Tested-by: Ivan Shapovalov <intelfx@intelfx.name>
Reported-by: Heddxh <g311571057@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAE93xANEby6RezOD=zcofENYZOT-wpYygJyauyUAZkLv6XVFOA@mail.gmail.com/
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_load_block_group_zone_info() we never drop a reference on the
chunk map we have looked up, therefore leaking a reference on it. So
add the missing btrfs_free_chunk_map() at the end of the function.
Fixes: 7dc66abb5a ("btrfs: use a dedicated data structure for chunk maps")
Reported-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we allow an encoded write against inodes that have the NODATASUM
flag set, either because they are NOCOW files or they were created while
the filesystem was mounted with "-o nodatasum". This results in having
compressed extents without corresponding checksums, which is a filesystem
inconsistency reported by 'btrfs check'.
For example, running btrfs/281 with MOUNT_OPTIONS="-o nodatacow" triggers
this and 'btrfs check' errors out with:
[1/7] checking root items
[2/7] checking extents
[3/7] checking free space tree
[4/7] checking fs roots
root 256 inode 257 errors 1040, bad file extent, some csum missing
root 256 inode 258 errors 1040, bad file extent, some csum missing
ERROR: errors found in fs roots
(...)
So reject encoded writes if the target inode has NODATASUM set.
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently when doing a write to a file we always reserve metadata space
for inserting data checksums. However we don't need to do it if we have
a nodatacow file (-o nodatacow mount option or chattr +C) or if checksums
are disabled (-o nodatasum mount option), as in that case we are only
adding unnecessary pressure to metadata reservations.
For example on x86_64, with the default node size of 16K, a 4K buffered
write into a nodatacow file is reserving 655360 bytes of metadata space,
as it's accounting for checksums. After this change, which stops reserving
space for checksums if we have a nodatacow file or checksums are disabled,
we only need to reserve 393216 bytes of metadata.
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
Hi,
Align the IPC4 firmware path/name and the topology path to the documentation:
default_fw_path: intel/sof-ipc4/{platform_name}
default_lib_path: intel/sof-ipc4-lib/{platform_name}
default_tplg_path: intel/sof-ipc4-tplg
default_fw_filename: sof-{platform_name}.ri
Tiger Lake and Lunar Lake support is not yet available via the official
firmware release, the paths can be changed now to avoid misalignment in the
future.
Regards,
Peter
---
Peter Ujfalusi (2):
ASoC: SOF: Intel: pci-tgl: Change the default paths and firmware names
ASoC: SOF: Intel: pci-lnl: Change the topology path to
intel/sof-ipc4-tplg
sound/soc/sof/intel/pci-lnl.c | 2 +-
sound/soc/sof/intel/pci-tgl.c | 64 +++++++++++++++++------------------
2 files changed, 33 insertions(+), 33 deletions(-)
--
2.43.0
Commit a8b9cf62ad ("ftrace: Fix DIRECT_CALLS to use SAVE_REGS by
default") attempted to fix an issue with direct trampolines on x86, see
its description for details. However, it wrongly referenced the
HAVE_DYNAMIC_FTRACE_WITH_REGS config option and the problem is still
present.
Add the missing "CONFIG_" prefix for the logic to work as intended.
Link: https://lore.kernel.org/linux-trace-kernel/20240213132434.22537-1-petr.pavlu@suse.com
Fixes: a8b9cf62ad ("ftrace: Fix DIRECT_CALLS to use SAVE_REGS by default")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
NVM Express TP4167 provides a way for controllers to report a relaxed
execution constraint. Specifically, it notifies of exclusivity for IO
vs. admin commands instead of grouping these together. If set, then we
don't need to freeze IO in order to execute that admin command. The
freezing distrupts IO processes, so it's nice to avoid that if the
controller tells us it's not necessary.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Underscores should not be used in node names (dtc with W=2 warns about
them), so replace them with hyphens.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Pull tracing tooling fixes from Steven Rostedt:
"RTLA:
- rtla tools are exiting with a positive value when usage() is
called. Make them return 0 if the usage was called via -h/--help
- the -P priority sets the sched priority for rtla workload. When the
SCHED_OTHER scheduler is selected, it sets the rt_priority instead
of the nice parameter. Setting the nice value is the correct thing,
so fix it
- rtla is failing to compile with clang due to unsupported options
from gcc. Adjusting the compiler/linker options makes clang work
properly
- Remove the sched_getattr() unused function on utils.c
- Fixes for variable initialization and size, reported by clang
Verification:
- rv is failing to compile with clang due to unsupported options from
gcc. Adjusting the compiler/linker options makes clang work
properly
- Fix an uninitialized variable on in_kernel.c reported by clang"
* tag 'trace-tools-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/rtla: Exit with EXIT_SUCCESS when help is invoked
tools/rtla: Replace setting prio with nice for SCHED_OTHER
tools/rv: Fix curr_reactor uninitialized variable
tools/rv: Fix Makefile compiler options for clang
tools/rtla: Remove unused sched_getattr() function
tools/rtla: Fix clang warning about mount_point var size
tools/rtla: Fix uninitialized bucket/data->bucket_size warning
tools/rtla: Fix Makefile compiler options for clang
In nvmf_connect_io_queue(), if connect I/O command fails, we log the
error and continue for authentication. This overrides error captured
from __nvme_submit_sync_cmd(), causing wrong return value.
Add goto out_free_data after logging connect error to fix the issue.
Fixes: f50fff73d6 ("nvme: implement In-Band authentication")
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
There was a change in the mxs-dma engine that uses a new custom flag.
The change was not applied to the mxs spi driver.
This results in chipselect being deasserted too early.
This fixes the chipselect problem by using the new flag in the mxs-spi
driver.
Fixes: ceeeb99cd8 ("dmaengine: mxs: rename custom flag")
Signed-off-by: Ralf Schlatterbeck <rsc@runtux.com>
Link: https://msgid.link/r/20240202115330.wxkbfmvd76sy3a6a@runtux.com
Signed-off-by: Mark Brown <broonie@kernel.org>
gcc-14 notices that the allocation with sizeof(void) on 32-bit architectures
is not enough for a 64-bit phys_addr_t:
drivers/firmware/efi/capsule-loader.c: In function 'efi_capsule_open':
drivers/firmware/efi/capsule-loader.c:295:24: error: allocation of insufficient size '4' for type 'phys_addr_t' {aka 'long long unsigned int'} with size '8' [-Werror=alloc-size]
295 | cap_info->phys = kzalloc(sizeof(void *), GFP_KERNEL);
| ^
Use the correct type instead here.
Fixes: f24c4d4780 ("efi/capsule-loader: Reinstate virtual capsule mapping")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
When the system is suspended while audio is active, the
sof_ipc4_pcm_hw_free() is invoked to reset the pipelines since during
suspend the DSP is turned off, streams will be re-started after resume.
If the firmware crashes during while audio is running (or when we reset
the stream before suspend) then the sof_ipc4_set_multi_pipeline_state()
will fail with IPC error and the state change is interrupted.
This will cause misalignment between the kernel and firmware state on next
DSP boot resulting errors returned by firmware for IPC messages, eventually
failing the audio resume.
On stream close the errors are ignored so the kernel state will be
corrected on the next DSP boot, so the second boot after the DSP panic.
If sof_ipc4_trigger_pipelines() is called from sof_ipc4_pcm_hw_free() then
state parameter is SOF_IPC4_PIPE_RESET and only in this case.
Treat a forced pipeline reset similarly to how we treat a pcm_free by
ignoring error on state sending to allow the kernel's state to be
consistent with the state the firmware will have after the next boot.
Link: https://github.com/thesofproject/sof/issues/8721
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240213115233.15716-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
clang-16 points out a mismatch in function types that was hidden
by a typecast:
sound/soc/qcom/qdsp6/q6apm-dai.c:355:38: error: cast from 'void (*)(uint32_t, uint32_t, uint32_t *, void *)' (aka 'void (*)(unsigned int, unsigned int, unsigned int *, void *)') to 'q6apm_cb' (aka 'void (*)(unsigned int, unsigned int, void *, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
355 | prtd->graph = q6apm_graph_open(dev, (q6apm_cb)event_handler, prtd, graph_id);
sound/soc/qcom/qdsp6/q6apm-dai.c:499:38: error: cast from 'void (*)(uint32_t, uint32_t, uint32_t *, void *)' (aka 'void (*)(unsigned int, unsigned int, unsigned int *, void *)') to 'q6apm_cb' (aka 'void (*)(unsigned int, unsigned int, void *, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict]
499 | prtd->graph = q6apm_graph_open(dev, (q6apm_cb)event_handler_compr, prtd, graph_id);
The only difference here is the 'payload' argument, which is not even
used in this function, so just fix its type and remove the cast.
Fixes: 88b60bf047 ("ASoC: q6dsp: q6apm-dai: Add open/free compress DAI callbacks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://msgid.link/r/20240213101105.459402-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The currently used paths and firmware name reflects the reference firmware
convention:
default_fw_path: intel/avs/{platform_name}
default_lib_path: intel/avs-lib/{platform_name}
default_tplg_path: intel/avs-tplg
default_fw_filename: dsp_basefw.bin
The SOF supports building the firmware for cAVS2.5 platforms using IPC4 and
it is the preferred IPC4 implementation to be used on these devices.
Change the paths and firmware names to reflect this:
default_fw_path: intel/sof-ipc4/{platform_name}
default_lib_path: intel/sof-ipc4-lib/{platform_name}
default_tplg_path: intel/sof-ipc4-tplg
default_fw_filename: sof-{platform_name}.ri
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240213080418.21256-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When CONFIG_PTP_1588_CLOCK=m and CONFIG_TI_ICSSG_PRUETH=y, there are
kconfig dependency warnings and build errors referencing PTP functions.
Fix these by making TI_ICSSG_PRUETH depend on PTP_1588_CLOCK_OPTIONAL.
Fixes these build errors and warnings:
WARNING: unmet direct dependencies detected for TI_ICSS_IEP
Depends on [m]: NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_TI [=y] && PTP_1588_CLOCK_OPTIONAL [=m] && TI_PRUSS [=y]
Selected by [y]:
- TI_ICSSG_PRUETH [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_TI [=y] && PRU_REMOTEPROC [=y] && ARCH_K3 [=y] && OF [=y] && TI_K3_UDMA_GLUE_LAYER [=y]
aarch64-linux-ld: drivers/net/ethernet/ti/icssg/icss_iep.o: in function `icss_iep_get_ptp_clock_idx':
icss_iep.c:(.text+0x1d4): undefined reference to `ptp_clock_index'
aarch64-linux-ld: drivers/net/ethernet/ti/icssg/icss_iep.o: in function `icss_iep_exit':
icss_iep.c:(.text+0xde8): undefined reference to `ptp_clock_unregister'
aarch64-linux-ld: drivers/net/ethernet/ti/icssg/icss_iep.o: in function `icss_iep_init':
icss_iep.c:(.text+0x176c): undefined reference to `ptp_clock_register'
Fixes: 186734c158 ("net: ti: icssg-prueth: add packet timestamping and ptp support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Roger Quadros <rogerq@ti.com>
Cc: Md Danish Anwar <danishanwar@ti.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/20240211061152.14696-1-rdunlap@infradead.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On unloading of the scmi_perf_domain module got the below splat, when in
the DT provided to the system under test the '#power-domain-cells' property
was missing. Indeed, this particular setup causes the probe to bail out
early without giving any error, which leads to the ->remove() callback gets
to run too, but without all the expected initialized structures in place.
Add a check and bail out early on remove too.
Call trace:
scmi_perf_domain_remove+0x28/0x70 [scmi_perf_domain]
scmi_dev_remove+0x28/0x40 [scmi_core]
device_remove+0x54/0x90
device_release_driver_internal+0x1dc/0x240
driver_detach+0x58/0xa8
bus_remove_driver+0x78/0x108
driver_unregister+0x38/0x70
scmi_driver_unregister+0x28/0x180 [scmi_core]
scmi_perf_domain_driver_exit+0x18/0xb78 [scmi_perf_domain]
__arm64_sys_delete_module+0x1a8/0x2c0
invoke_syscall+0x50/0x128
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x34/0xb8
el0t_64_sync_handler+0x100/0x130
el0t_64_sync+0x190/0x198
Code: a90153f3 f9403c14 f9414800 955f8a05 (b9400a80)
---[ end trace 0000000000000000 ]---
Fixes: 2af23ceb86 ("pmdomain: arm: Add the SCMI performance domain")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240125191756.868860-1-cristian.marussi@arm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The xf86-input-wacom driver does not treat '0' as a valid serial
number and will drop any input report which contains an
MSC_SERIAL = 0 event. The kernel driver already takes care to
avoid sending any MSC_SERIAL event if the value of serial[0] == 0
(which is the case for devices that don't actually report a
serial number), but this is not quite sufficient.
Only the lower 32 bits of the serial get reported to userspace,
so if this portion of the serial is zero then there can still
be problems.
This commit allows the driver to report either the lower 32 bits
if they are non-zero or the upper 32 bits otherwise.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Tatsunosuke Tobita <tatsunosuke.tobita@wacom.com>
Fixes: f85c9dc678 ("HID: wacom: generic: Support tool ID and additional tool types")
CC: stable@vger.kernel.org # v4.10
Signed-off-by: Jiri Kosina <jkosina@suse.com>
After legacy suspend/resume via ACPI S3, sensor read operation fails
with timeout. Also, it will cause delay in resume operation as there
will be retries on failure.
This is caused by commit f645a90e8f ("HID: intel-ish-hid:
ishtp-hid-client: use helper functions for connection"), which used
helper functions to simplify connect, reset and disconnect process.
Also avoid freeing and allocating client buffers again during reconnect
process.
But there is a case, when ISH firmware resets after ACPI S3 suspend,
ishtp bus driver frees client buffers. Since there is no realloc again
during reconnect, there are no client buffers available to send connection
requests to the firmware. Without successful connection to the firmware,
subsequent sensor reads will timeout.
To address this issue, ishtp bus driver does not free client buffers on
warm reset after S3 resume. Simply add the buffers from the read list
to free list of buffers.
Fixes: f645a90e8f ("HID: intel-ish-hid: ishtp-hid-client: use helper functions for connection")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218442
Signed-off-by: Even Xu <even.xu@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
When updating the affinity of a VPE, the VMOVP command is currently skipped
if the two CPUs are part of the same VPE affinity.
But this is wrong, as the doorbell corresponding to this VPE is still
delivered on the 'old' CPU, which screws up the balancing. Furthermore,
offlining that 'old' CPU results in doorbell interrupts generated for this
VPE being discarded.
The harsh reality is that VMOVP cannot be elided when a set_affinity()
request occurs. It needs to be obeyed, and if an optimisation is to be
made, it is at the point where the affinity change request is made (such as
in KVM).
Drop the VMOVP elision altogether, and only use the vpe_table_mask
to try and stay within the same ITS affinity group if at all possible.
Fixes: dd3f050a21 (irqchip/gic-v4.1: Implement the v4.1 flavour of VMOVP)
Reported-by: Kunkun Jiang <jiangkunkun@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240213101206.2137483-4-maz@kernel.org
While refactoring the way the ITSs are probed, the handling of quirks
applicable to ACPI-based platforms was lost. As a result, systems such as
HIP07 lose their GICv4 functionnality, and some other may even fail to
boot, unless they are configured to boot with DT.
Move the enabling of quirks into its_probe_one(), making it common to all
firmware implementations.
Fixes: 9585a495ac ("irqchip/gic-v3-its: Split allocation from initialisation of its_node")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240213101206.2137483-3-maz@kernel.org
Although the GICv3 code base has gained some handling of systems failing to
handle the shareability attributes, the GICv4 side of things has been
firmly ignored.
This is unfortunate, as the new recent addition of the "dma-noncoherent" is
supposed to apply to all of the GICR tables, and not just the ones that are
common to v3 and v4.
Add some checks to handle the VPROPBASE/VPENDBASE shareability and
cacheability attributes in the same way we deal with the other GICR_BASE
registers, wrapping the flag check in a helper for improved readability.
Note that this has been found by inspection only, as I don't have access to
HW that suffers from this particular issue.
Fixes: 3a0fff0fb6 ("irqchip/gic-v3: Enable non-coherent redistributors/ITSes DT probing")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Link: https://lore.kernel.org/r/20240213101206.2137483-2-maz@kernel.org
When unlinking a file the check caps could be delayed for more than
5 seconds, but in MDS side it maybe waiting for the clients to
release caps.
This will use the cap_wq work queue and a dedicated list to help
fire the check_caps() and dirty buffer flushing immediately.
Link: https://tracker.ceph.com/issues/50223
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In case there is 'Fw' dirty caps and 'CHECK_CAPS_FLUSH' is set we
will always ignore queue a writeback. Queue a writeback is very
important because it will block kclient flushing the snapcaps to
MDS and which will block MDS waiting for revoking the 'Fb' caps.
Link: https://tracker.ceph.com/issues/50223
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
eiointc_domain_alloc() uses struct eiointc, which is not defined, for a
pointer. Older compilers treat that as a forward declaration and due to
assignment of a void pointer there is no warning emitted. As the variable
is then handed in as a void pointer argument to irq_domain_set_info() the
code is functional.
Use struct eiointc_priv instead.
[ tglx: Rewrote changelog ]
Fixes: dd281e1a1a ("irqchip: Add Loongson Extended I/O interrupt controller support")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20240130082722.2912576-2-maobibo@loongson.cn
shutdown_pirq and startup_pirq are not taking the
irq_mapping_update_lock because they can't due to lock inversion. Both
are called with the irq_desc->lock being taking. The lock order,
however, is first irq_mapping_update_lock and then irq_desc->lock.
This opens multiple races:
- shutdown_pirq can be interrupted by a function that allocates an event
channel:
CPU0 CPU1
shutdown_pirq {
xen_evtchn_close(e)
__startup_pirq {
EVTCHNOP_bind_pirq
-> returns just freed evtchn e
set_evtchn_to_irq(e, irq)
}
xen_irq_info_cleanup() {
set_evtchn_to_irq(e, -1)
}
}
Assume here event channel e refers here to the same event channel
number.
After this race the evtchn_to_irq mapping for e is invalid (-1).
- __startup_pirq races with __unbind_from_irq in a similar way. Because
__startup_pirq doesn't take irq_mapping_update_lock it can grab the
evtchn that __unbind_from_irq is currently freeing and cleaning up. In
this case even though the event channel is allocated, its mapping can
be unset in evtchn_to_irq.
The fix is to first cleanup the mappings and then close the event
channel. In this way, when an event channel gets allocated it's
potential previous evtchn_to_irq mappings are guaranteed to be unset already.
This is also the reverse order of the allocation where first the event
channel is allocated and then the mappings are setup.
On a 5.10 kernel prior to commit 3fcdaf3d76 ("xen/events: modify internal
[un]bind interfaces"), we hit a BUG like the following during probing of NVMe
devices. The issue is that during nvme_setup_io_queues, pci_free_irq
is called for every device which results in a call to shutdown_pirq.
With many nvme devices it's therefore likely to hit this race during
boot because there will be multiple calls to shutdown_pirq and
startup_pirq are running potentially in parallel.
------------[ cut here ]------------
blkfront: xvda: barrier or flush: disabled; persistent grants: enabled; indirect descriptors: enabled; bounce buffer: enabled
kernel BUG at drivers/xen/events/events_base.c:499!
invalid opcode: 0000 [#1] SMP PTI
CPU: 44 PID: 375 Comm: kworker/u257:23 Not tainted 5.10.201-191.748.amzn2.x86_64 #1
Hardware name: Xen HVM domU, BIOS 4.11.amazon 08/24/2006
Workqueue: nvme-reset-wq nvme_reset_work
RIP: 0010:bind_evtchn_to_cpu+0xdf/0xf0
Code: 5d 41 5e c3 cc cc cc cc 44 89 f7 e8 2b 55 ad ff 49 89 c5 48 85 c0 0f 84 64 ff ff ff 4c 8b 68 30 41 83 fe ff 0f 85 60 ff ff ff <0f> 0b 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 0f 1f 44 00 00
RSP: 0000:ffffc9000d533b08 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006
RDX: 0000000000000028 RSI: 00000000ffffffff RDI: 00000000ffffffff
RBP: ffff888107419680 R08: 0000000000000000 R09: ffffffff82d72b00
R10: 0000000000000000 R11: 0000000000000000 R12: 00000000000001ed
R13: 0000000000000000 R14: 00000000ffffffff R15: 0000000000000002
FS: 0000000000000000(0000) GS:ffff88bc8b500000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000002610001 CR4: 00000000001706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
? show_trace_log_lvl+0x1c1/0x2d9
? show_trace_log_lvl+0x1c1/0x2d9
? set_affinity_irq+0xdc/0x1c0
? __die_body.cold+0x8/0xd
? die+0x2b/0x50
? do_trap+0x90/0x110
? bind_evtchn_to_cpu+0xdf/0xf0
? do_error_trap+0x65/0x80
? bind_evtchn_to_cpu+0xdf/0xf0
? exc_invalid_op+0x4e/0x70
? bind_evtchn_to_cpu+0xdf/0xf0
? asm_exc_invalid_op+0x12/0x20
? bind_evtchn_to_cpu+0xdf/0xf0
? bind_evtchn_to_cpu+0xc5/0xf0
set_affinity_irq+0xdc/0x1c0
irq_do_set_affinity+0x1d7/0x1f0
irq_setup_affinity+0xd6/0x1a0
irq_startup+0x8a/0xf0
__setup_irq+0x639/0x6d0
? nvme_suspend+0x150/0x150
request_threaded_irq+0x10c/0x180
? nvme_suspend+0x150/0x150
pci_request_irq+0xa8/0xf0
? __blk_mq_free_request+0x74/0xa0
queue_request_irq+0x6f/0x80
nvme_create_queue+0x1af/0x200
nvme_create_io_queues+0xbd/0xf0
nvme_setup_io_queues+0x246/0x320
? nvme_irq_check+0x30/0x30
nvme_reset_work+0x1c8/0x400
process_one_work+0x1b0/0x350
worker_thread+0x49/0x310
? process_one_work+0x350/0x350
kthread+0x11b/0x140
? __kthread_bind_mask+0x60/0x60
ret_from_fork+0x22/0x30
Modules linked in:
---[ end trace a11715de1eee1873 ]---
Fixes: d46a78b05c ("xen: implement pirq type event channels")
Cc: stable@vger.kernel.org
Co-debugged-by: Andrew Panyakin <apanyaki@amazon.com>
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240124163130.31324-1-mheyne@amazon.de
Signed-off-by: Juergen Gross <jgross@suse.com>
It was observed on Broadcom devices that use GIC v3 architecture L1
interrupt controllers as the parent of brcmstb-l2 interrupt controllers
that the deactivation of the parent interrupt could happen before the
brcmstb-l2 deasserted its output. This would lead the GIC to reactivate the
interrupt only to find that no L2 interrupt was pending. The result was a
spurious interrupt invoking handle_bad_irq() with its associated
messaging. While this did not create a functional problem it is a waste of
cycles.
The hazard exists because the memory mapped bus writes to the brcmstb-l2
registers are buffered and the GIC v3 architecture uses a very efficient
system register write to deactivate the interrupt.
Add a write memory barrier prior to invoking chained_irq_exit() to
introduce a dsb(st) on those systems to ensure the system register write
cannot be executed until the memory mapped writes are visible to the
system.
[ florian: Added Fixes tag ]
Fixes: 7f646e9276 ("irqchip: brcmstb-l2: Add Broadcom Set Top Box Level-2 interrupt controller")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240210012449.3009125-1-florian.fainelli@broadcom.com
This issue was found and also debugged by Carl Lei <me@xecycle.info>.
If the device is not enabled, iblock/file will have not setup their
se_device to bdev/file mappings. If a user tries to config the unmap
settings at this time, we will then crash trying to access a NULL pointer
where the bdev/file should be.
This patch adds a check to make sure the device is configured before
we try to call the configure_unmap callout.
Fixes: 34bd1dcacf ("scsi: target: Detect UNMAP support post configuration")
Reported-by: Carl Lei <me@xecycle.info>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240209215247.5213-1-michael.christie@oracle.com
Reviewed-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The cited commit introduces and uses the string constants dpp_tx_err and
dpp_rx_err. These are assigned to constant fields of the array
dwxgmac3_error_desc.
It has been reported that on GCC 6 and 7.5.0 this results in warnings
such as:
.../dwxgmac2_core.c:836:20: error: initialiser element is not constant
{ true, "TDPES0", dpp_tx_err },
I have been able to reproduce this using: GCC 7.5.0, 8.4.0, 9.4.0 and 10.5.0.
But not GCC 13.2.0.
So it seems this effects older compilers but not newer ones.
As Jon points out in his report, the minimum compiler supported by
the kernel is GCC 5.1, so it does seem that this ought to be fixed.
It is not clear to me what combination of 'const', if any, would address
this problem. So this patch takes of using #defines for the string
constants
Compile tested only.
Fixes: 46eba193d0 ("net: stmmac: xgmac: fix handling of DPP safety error for DMA channels")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Closes: https://lore.kernel.org/netdev/c25eb595-8d91-40ea-9f52-efa15ebafdbc@nvidia.com/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202402081135.lAxxBXHk-lkp@intel.com/
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240208-xgmac-const-v1-1-e69a1eeabfc8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Seth reported that on his side XDP traffic can not survive a round of
down/up against i40e interface. Dmesg output was telling us that we were
not able to disable the very first XDP ring. That was due to the fact
that in i40e_vsi_stop_rings() in a pre-work that is done before calling
i40e_vsi_wait_queues_disabled(), XDP Tx queues were not taken into the
account.
To fix this, let us distinguish between Rx and Tx queue boundaries and
take into the account XDP queues for Tx side.
Reported-by: Seth Forshee <sforshee@kernel.org>
Closes: https://lore.kernel.org/netdev/ZbkE7Ep1N1Ou17sA@do-x1extreme/
Fixes: 65662a8dcd ("i40e: Fix logic of disabling queues")
Tested-by: Seth Forshee <sforshee@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently, when interface is being brought down and
i40e_vsi_stop_rings() is called, i40e_pf_rxq_wait() is called two times,
which is wrong. To showcase this scenario, simplified call stack looks
as follows:
i40e_vsi_stop_rings()
i40e_control wait rx_q()
i40e_control_rx_q()
i40e_pf_rxq_wait()
i40e_vsi_wait_queues_disabled()
i40e_pf_rxq_wait() // redundant call
To fix this, let us s/i40e_control_wait_rx_q/i40e_control_rx_q within
i40e_vsi_stop_rings().
Fixes: 65662a8dcd ("i40e: Fix logic of disabling queues")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Mask used for clearing PRTDCB_RETSTCC register in function
i40e_dcb_hw_rx_ets_bw_config() is incorrect as there is used
define I40E_PRTDCB_RETSTCC_ETSTC_SHIFT instead of define
I40E_PRTDCB_RETSTCC_ETSTC_MASK.
The PRTDCB_RETSTCC register is used to configure whether ETS
or strict priority is used as TSA in Rx for particular TC.
In practice it means that once the register is set to use ETS
as TSA then it is not possible to switch back to strict priority
without CoreR reset.
Fix the value in the clearing mask.
Fixes: 90bc8e003b ("i40e: Add hardware configuration for software based DCB")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The function i40e_pf_wait_queues_disabled() iterates all PF's VSIs
up to 'pf->hw.func_caps.num_vsis' but this is incorrect because
the real number of VSIs can be up to 'pf->num_alloc_vsi' that
can be higher. Fix this loop.
Fixes: 69129dc39f ("i40e: Modify Tx disable wait flow in case of DCB reconfiguration")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently when PF administratively sets VF's MAC address and the VF
is put down (VF tries to delete all MACs) then the MAC is removed
from MAC filters and primary VF MAC is zeroed.
Do not allow untrusted VF to remove primary MAC when it was set
administratively by PF.
Reproducer:
1) Create VF
2) Set VF interface up
3) Administratively set the VF's MAC
4) Put VF interface down
[root@host ~]# echo 1 > /sys/class/net/enp2s0f0/device/sriov_numvfs
[root@host ~]# ip link set enp2s0f0v0 up
[root@host ~]# ip link set enp2s0f0 vf 0 mac fe:6c:b5:da:c7:7d
[root@host ~]# ip link show enp2s0f0
23: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 3c:ec:ef:b7:dd:04 brd ff:ff:ff:ff:ff:ff
vf 0 link/ether fe:6c:b5:da:c7:7d brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off
[root@host ~]# ip link set enp2s0f0v0 down
[root@host ~]# ip link show enp2s0f0
23: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 3c:ec:ef:b7:dd:04 brd ff:ff:ff:ff:ff:ff
vf 0 link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff, spoof checking on, link-state auto, trust off
Fixes: 700bbf6c1f ("i40e: allow VF to remove any MAC filter")
Fixes: ceb29474bb ("i40e: Add support for VF to specify its primary MAC address")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240208180335.1844996-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When ident_pud_init() uses only gbpages to create identity maps, large
ranges of addresses not actually requested can be included in the
resulting table; a 4K request will map a full GB. On UV systems, this
ends up including regions that will cause hardware to halt the system
if accessed (these are marked "reserved" by BIOS). Even processor
speculation into these regions is enough to trigger the system halt.
Only use gbpages when map creation requests include the full GB page
of space. Fall back to using smaller 2M pages when only portions of a
GB page are included in the request.
No attempt is made to coalesce mapping requests. If a request requires
a map entry at the 2M (pmd) level, subsequent mapping requests within
the same 1G region will also be at the pmd level, even if adjacent or
overlapping such requests could have been combined to map a full
gbpage. Existing usage starts with larger regions and then adds
smaller regions, so this should not have any great consequence.
[ dhansen: fix up comment formatting, simplifty changelog ]
Signed-off-by: Steve Wahl <steve.wahl@hpe.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240126164841.170866-1-steve.wahl%40hpe.com
Pull documentation fix from Jonathan Corbet:
"A single fix to the kernel_feat extension for a bug that will crash
the docs build in some situations"
* tag 'docs-6.8-fixes2' of git://git.lwn.net/linux:
docs: kernel_feat.py: fix build error for missing files
Clear Cause.BD after we use instruction_pointer_set to override
EPC.
This can prevent exception_epc check against instruction code at
new return address.
It won't be considered as "in delay slot" after epc being overridden
anyway.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
After 'lib: checksum: Use aligned accesses for ip_fast_csum and
csum_ipv6_magic tests' was applied, the test_csum_ipv6_magic unit test
started failing for all mips platforms, both little and bit endian.
Oddly enough, adding debug code into test_csum_ipv6_magic() made the
problem disappear.
The gcc manual says:
"The "memory" clobber tells the compiler that the assembly code performs
memory reads or writes to items other than those listed in the input
and output operands (for example, accessing the memory pointed to by one
of the input parameters)
"
This is definitely the case for csum_ipv6_magic(). Indeed, adding the
'memory' clobber fixes the problem.
Cc: Charlie Jenkins <charlie@rivosinc.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Convert path separator to CIFS_DIR_SEP(cifs_sb) from symlink target
before sending it over the wire otherwise the created SMB symlink may
become innaccesible from server side.
Fixes: 514d793e27 ("smb: client: allow creating symlinks via reparse points")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
For i2c read operation in GSI mode, we are getting timeout
due to malformed TRE basically incorrect TRE sequence
in gpi(drivers/dma/qcom/gpi.c) driver.
I2C driver has geni_i2c_gpi(I2C_WRITE) function which generates GO TRE and
geni_i2c_gpi(I2C_READ)generates DMA TRE. Hence to generate GO TRE before
DMA TRE, we should move geni_i2c_gpi(I2C_WRITE) before
geni_i2c_gpi(I2C_READ) inside the I2C GSI mode transfer function
i.e. geni_i2c_gpi_xfer().
TRE stands for Transfer Ring Element - which is basically an element with
size of 4 words. It contains all information like slave address,
clk divider, dma address value data size etc).
Mainly we have 3 TREs(Config, GO and DMA tre).
- CONFIG TRE : consists of internal register configuration which is
required before start of the transfer.
- DMA TRE : contains DDR/Memory address, called as DMA descriptor.
- GO TRE : contains Transfer directions, slave ID, Delay flags, Length
of the transfer.
I2c driver calls GPI driver API to config each TRE depending on the
protocol.
For read operation tre sequence will be as below which is not aligned
to hardware programming guide.
- CONFIG tre
- DMA tre
- GO tre
As per Qualcomm's internal Hardware Programming Guide, we should configure
TREs in below sequence for any RX only transfer.
- CONFIG tre
- GO tre
- DMA tre
Fixes: d8703554f4 ("i2c: qcom-geni: Add support for GPI DMA")
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # qrb5165-rb5
Co-developed-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Pull vfs fixes from Christian Brauner:
- Fix performance regression introduced by moving the security
permission hook out of do_clone_file_range() and into its caller
vfs_clone_file_range().
This causes the security hook to be called in situation were it
wasn't called before as the fast permission checks were left in
do_clone_file_range().
Fix this by merging the two implementations back together and
restoring the old ordering: fast permission checks first, expensive
ones later.
- Tweak mount_setattr() permission checking so that mount properties on
the real rootfs can be changed.
When we added mount_setattr() we added additional checks compared to
legacy mount(2). If the mount had a parent then verify that the
caller and the mount namespace the mount is attached to match and if
not make sure that it's an anonymous mount.
But the real rootfs falls into neither category. It is neither an
anoymous mount because it is obviously attached to the initial mount
namespace but it also obviously doesn't have a parent mount. So that
means legacy mount(2) allows changing mount properties on the real
rootfs but mount_setattr(2) blocks this. This causes regressions (See
the commit for details).
Fix this by relaxing the check. If the mount has a parent or if it
isn't a detached mount, verify that the mount namespaces of the
caller and the mount are the same. Technically, we could probably
write this even simpler and check that the mount namespaces match if
it isn't a detached mount. But the slightly longer check makes it
clearer what conditions one needs to think about.
* tag 'vfs-6.8-rc5.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: relax mount_setattr() permission checks
remap_range: merge do_clone_file_range() into vfs_clone_file_range()
The conversion to kvcalloc() mixed up the object size and count
arguments, causing a warning:
drivers/gpu/drm/nouveau/nouveau_svm.c: In function 'nouveau_svm_fault_buffer_ctor':
drivers/gpu/drm/nouveau/nouveau_svm.c:1010:40: error: 'kvcalloc' sizes specified with 'sizeof' in the earlier argument and not in the later argument [-Werror=calloc-transposed-args]
1010 | buffer->fault = kvcalloc(sizeof(*buffer->fault), buffer->entries, GFP_KERNEL);
| ^
drivers/gpu/drm/nouveau/nouveau_svm.c:1010:40: note: earlier argument should specify number of elements, later size of each element
The behavior is still correct aside from the warning, but fixing it avoids
the warnings and can help the compiler track the individual objects better.
Fixes: 71e4bbca07 ("nouveau/svm: Use kvcalloc() instead of kvzalloc()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240212112230.1117284-1-arnd@kernel.org
During the cache sync test we verify that values we expect to have been
written only to the cache do not appear in the hardware. This works most
of the time but since we randomly generate both the original and new values
there is a low probability that these values may actually be the same.
Wrap get_random_bytes() to ensure that the values are different, there
are other tests which should have similar verification that we actually
changed something.
While we're at it refactor the test to use three changed values rather
than attempting to use one of them twice, that just complicates checking
that our new values are actually new.
We use random generation to try to avoid data dependencies in the tests.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://msgid.link/r/20240211-regmap-kunit-random-change-v3-1-e387a9ea4468@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
MCSPI controller have few limitations regarding the transaction
size when the FIFO buffer is enabled and the WCNT feature is used
to find the end of word, in this case if WCNT is not a multiple of
the FIFO Almost Empty Level (AEL), then the FIFO empty event is not
generated correctly. In addition to this limitation, few other unknown
sequence of events that causes the FIFO empty status to not reflect the
exact status were found when FIFO is being used without DMA enabled
during extended testing in AM65x platform. Till the exact root cause
is found and fixed, revert the FIFO support without DMA.
See J721E Technical Reference Manual (SPRUI1C), section 12.1.5
for further details: http://www.ti.com/lit/pdf/spruil1
This reverts commit 75223bbea8 ("spi: omap2-mcspi: Add FIFO support
without DMA")
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Link: https://msgid.link/r/20240212120049.438495-1-vaishnav.a@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Documentation/ABI/testing/sysfs-class-net-statistics documentation
is pointing to the wrong path for the interface. Documentation is
pointing to /sys/class/<iface>, instead of /sys/class/net/<iface>.
Fix it by adding the `net/` directory before the interface.
Fixes: 6044f97006 ("net: sysfs: document /sys/class/net/statistics/*")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
nouveau_abi16_ioctl_channel_alloc() and nouveau_cli_init() simply call
their corresponding *_fini() counterpart. This can lead to
nouveau_sched_fini() being called without struct nouveau_sched ever
being initialized in the first place.
Instead of embedding struct nouveau_sched into struct nouveau_cli and
struct nouveau_chan_abi16, allocate struct nouveau_sched separately,
such that we can check for the corresponding pointer to be NULL in the
particular *_fini() functions.
It makes sense to allocate struct nouveau_sched separately anyway, since
in a subsequent commit we can also avoid to allocate a struct
nouveau_sched in nouveau_abi16_ioctl_channel_alloc() at all, if the
VM_BIND uAPI has been disabled due to the legacy uAPI being used.
Fixes: 5f03a507b2 ("drm/nouveau: implement 1:1 scheduler - entity relationship")
Reported-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Closes: https://lore.kernel.org/nouveau/20240131213917.1545604-1-ttabi@nvidia.com/
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202000606.3526-1-dakr@redhat.com
Matthieu Baerts says:
====================
mptcp: locking cleanup & misc. fixes
Patches 1-4 are fixes for issues found by Paolo while working on adding
TCP_NOTSENT_LOWAT support. The latter will need to track more states
under the msk data lock. Since the locking msk locking schema is already
quite complex, do a long awaited clean-up step by moving several
confusing lockless initialization under the relevant locks. Note that it
is unlikely a real race could happen even prior to such patches as the
MPTCP-level state machine implicitly ensures proper serialization of the
write accesses, even lacking explicit lock. But still, simplification is
welcome and this will help for the maintenance. This can be backported
up to v5.6.
Patch 5 is a fix for the userspace PM, not to add new local address
entries if the address is already in the list. This behaviour can be
seen since v5.19.
Patch 6 fixes an issue when Fastopen is used. The issue can happen since
v6.2. A previous fix has already been applied, but not taking care of
all cases according to syzbot.
Patch 7 updates Geliang's email address in the MAINTAINERS file.
====================
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Before adding a new entry in mptcp_userspace_pm_get_local_id(), it's
better to check whether this address is already in userspace pm local
address list. If it's in the list, no need to add a new entry, just
return it's address ID and use this address.
Fixes: 8b20137012 ("mptcp: read attributes of addr entries managed by userspace PMs")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <geliang.tang@linux.dev>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most MPTCP-level related fields are under the mptcp data lock
protection, but are written one-off without such lock at MPC
complete time, both for the client and the server
Leverage the mptcp_propagate_state() infrastructure to move such
initialization under the proper lock client-wise.
The server side critical init steps are done by
mptcp_subflow_fully_established(): ensure the caller properly held the
relevant lock, and avoid acquiring the same lock in the nested scopes.
There are no real potential races, as write access to such fields
is implicitly serialized by the MPTCP state machine; the primary
goal is consistency.
Fixes: d22f4988ff ("mptcp: process MP_CAPABLE data option")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 'msk->write_seq' and 'msk->snd_nxt' are always updated under
the msk socket lock, except at MPC handshake completiont time.
Builds-up on the previous commit to move such init under the relevant
lock.
There are no known problems caused by the potential race, the
primary goal is consistency.
Fixes: 6d0060f600 ("mptcp: Write MPTCP DSS headers to outgoing data packets")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
mptcp_rcv_space_init() is supposed to happen under the msk socket
lock, but active msk socket does that without such protection.
Leverage the existing mptcp_propagate_state() helper to that extent.
We need to ensure mptcp_rcv_space_init will happen before
mptcp_rcv_space_adjust(), and the release_cb does not assure that:
explicitly check for such condition.
While at it, move the wnd_end initialization out of mptcp_rcv_space_init(),
it never belonged there.
Note that the race does not produce ill effect in practice, but
change allows cleaning-up and defying better the locking model.
Fixes: a6b118febb ("mptcp: add receive buffer auto-tuning")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Such field is there to avoid acquiring the data lock in a few spots,
but it adds complexity to the already non trivial locking schema.
All the relevant call sites (mptcp-level re-injection, set socket
options), are slow-path, drop such field in favor of 'cb_flags', adding
the relevant locking.
This patch could be seen as an improvement, instead of a fix. But it
simplifies the next patch. The 'Fixes' tag has been added to help having
this series backported to stable.
Fixes: e9d09baca6 ("mptcp: avoid atomic bit manipulation when possible")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet says:
====================
net: more three misplaced fields
We recently reorganized some structures for better data locality
in networking fast paths.
This series moves three fields that were not correctly classified.
There probably more to come.
Reference : https://lwn.net/Articles/951321/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
dev->lstats is notably used from loopback ndo_start_xmit()
and other virtual drivers.
Per cpu stats updates are dirtying per-cpu data,
but the pointer itself is read-only.
Fixes: 43a71cd66b ("net-device: reorganize net_device fast path variables")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Coco Li <lixiaoyan@google.com>
Cc: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When compiling rtla with clang, I am getting the following warnings:
$ make HOSTCC=clang CC=clang LLVM_IAS=1
[..]
clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions
-fstack-protector-strong -fasynchronous-unwind-tables
-fstack-clash-protection -Wall -Werror=format-security
-Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS
$(pkg-config --cflags libtracefs)
-c -o src/osnoise_hist.o src/osnoise_hist.c
src/osnoise_hist.c:138:6: warning: variable 'bucket' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
138 | if (data->bucket_size)
| ^~~~~~~~~~~~~~~~~
src/osnoise_hist.c:149:6: note: uninitialized use occurs here
149 | if (bucket < entries)
| ^~~~~~
src/osnoise_hist.c:138:2: note: remove the 'if' if its condition is always true
138 | if (data->bucket_size)
| ^~~~~~~~~~~~~~~~~~~~~~
139 | bucket = duration / data->bucket_size;
src/osnoise_hist.c:132:12: note: initialize the variable 'bucket' to silence this warning
132 | int bucket;
| ^
| = 0
1 warning generated.
[...]
clang -O -g -DVERSION=\"6.8.0-rc3\" -flto=auto -fexceptions
-fstack-protector-strong -fasynchronous-unwind-tables
-fstack-clash-protection -Wall -Werror=format-security
-Wp,-D_FORTIFY_SOURCE=2 -Wp,-D_GLIBCXX_ASSERTIONS
$(pkg-config --cflags libtracefs)
-c -o src/timerlat_hist.o src/timerlat_hist.c
src/timerlat_hist.c:181:6: warning: variable 'bucket' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
181 | if (data->bucket_size)
| ^~~~~~~~~~~~~~~~~
src/timerlat_hist.c:204:6: note: uninitialized use occurs here
204 | if (bucket < entries)
| ^~~~~~
src/timerlat_hist.c:181:2: note: remove the 'if' if its condition is always true
181 | if (data->bucket_size)
| ^~~~~~~~~~~~~~~~~~~~~~
182 | bucket = latency / data->bucket_size;
src/timerlat_hist.c:175:12: note: initialize the variable 'bucket' to silence this warning
175 | int bucket;
| ^
| = 0
1 warning generated.
This is a legit warning, but data->bucket_size is always > 0 (see
timerlat_hist_parse_args()), so the if is not necessary.
Remove the unneeded if (data->bucket_size) to avoid the warning.
Link: https://lkml.kernel.org/r/6e1b1665cd99042ae705b3e0fc410858c4c42346.1707217097.git.bristot@kernel.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Donald Zickus <dzickus@redhat.com>
Fixes: 1eeb6328e8 ("rtla/timerlat: Add timerlat hist mode")
Fixes: 829a6c0b56 ("rtla/osnoise: Add the hist mode")
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Issue IP reset before shutdown in order to
complete all upstream requests to the SOC.
Without this DevTLB is complaining about
incomplete transactions and NPU cannot resume from
suspend.
This problem is only happening on recent IFWI
releases.
IP reset in rare corner cases can mess up PCI
configuration, so save it before the reset.
After this happens it is also impossible to
issue PLL requests and D0->D3->D0 cycle is needed
to recover the NPU. Add WP 0 request on power up,
so the PUNIT is always notified about NPU reset.
Use D0/D3 cycle for recovery as it can recover
from failed IP reset and FLR cannot.
Fixes: 3f7c063492 ("accel/ivpu/37xx: Fix hangs related to MMIO reset")
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240207102446.3126981-1-jacek.lawrynowicz@linux.intel.com
Merge series from Hans de Goede <hdegoede@redhat.com>:
While testing 6.8 on a Bay Trail device with a ALC5640 codec
I noticed a regression in 6.8 which causes a NULL pointer deref
in probe().
All BYT/CHT Intel machine drivers are affected. Patch 1/2 of
this series fixes all of them.
Patch 2/2 adds some small cleanups to cht_bsw_rt5645.c for
issues which I noticed while working on 1/2.
File open requests made to the server contain a
CreateGuid, which is used by the server to identify
the open request. If the same request needs to be
replayed, it needs to be sent with the same CreateGuid
in the durable handle v2 context.
Without doing so, we could end up leaking handles on
the server when:
1. multichannel is used AND
2. connection goes down, but not for all channels
This is because the replayed open request would have a
new CreateGuid and the server will treat this as a new
request and open a new handle.
This change fixes this by reusing the existing create_guid
stored in the cached fid struct.
REF: MS-SMB2 4.9 Replay Create Request on an Alternate Channel
Fixes: 4f1fffa237 ("cifs: commands that are retried should have replay flag set")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
In this loop, we step through the buffer and after each item we check
if the size_left is greater than the minimum size we need. However,
the problem is that "bytes_left" is type ssize_t while sizeof() is type
size_t. That means that because of type promotion, the comparison is
done as an unsigned and if we have negative bytes left the loop
continues instead of ending.
Fixes: fe856be475 ("CIFS: parse and store info on iface queries")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
A recent change in acp_irq_thread() was meant to address a potential race
condition while trying to acquire the hardware semaphore responsible for
the synchronization between firmware and host IPC interrupts.
This resulted in an improper use of the IPC spinlock, causing normal
kernel memory allocations (which may sleep) inside atomic contexts:
1707255557.133976 kernel: BUG: sleeping function called from invalid context at include/linux/sched/mm.h:315
...
1707255557.134757 kernel: sof_ipc3_rx_msg+0x70/0x130 [snd_sof]
1707255557.134793 kernel: acp_sof_ipc_irq_thread+0x1e0/0x550 [snd_sof_amd_acp]
1707255557.134855 kernel: acp_irq_thread+0xa3/0x130 [snd_sof_amd_acp]
1707255557.134904 kernel: ? irq_thread+0xb5/0x1e0
1707255557.134947 kernel: ? __pfx_irq_thread_fn+0x10/0x10
1707255557.134985 kernel: irq_thread_fn+0x23/0x60
Moreover, there are attempts to lock a mutex from the same atomic
context:
1707255557.136357 kernel: =============================
1707255557.136393 kernel: [ BUG: Invalid wait context ]
1707255557.136413 kernel: 6.8.0-rc3-next-20240206-audio-next #9 Tainted: G W
1707255557.136432 kernel: -----------------------------
1707255557.136451 kernel: irq/66-AudioDSP/502 is trying to lock:
1707255557.136470 kernel: ffff965152f26af8 (&sb->s_type->i_mutex_key#2){+.+.}-{3:3}, at: start_creating.part.0+0x5f/0x180
...
1707255557.137429 kernel: start_creating.part.0+0x5f/0x180
1707255557.137457 kernel: __debugfs_create_file+0x61/0x210
1707255557.137475 kernel: snd_sof_debugfs_io_item+0x75/0xc0 [snd_sof]
1707255557.137494 kernel: sof_ipc3_do_rx_work+0x7cf/0x9f0 [snd_sof]
1707255557.137513 kernel: sof_ipc3_rx_msg+0xb3/0x130 [snd_sof]
1707255557.137532 kernel: acp_sof_ipc_irq_thread+0x1e0/0x550 [snd_sof_amd_acp]
1707255557.137551 kernel: acp_irq_thread+0xa3/0x130 [snd_sof_amd_acp]
Fix the issues by reducing the lock scope in acp_irq_thread(), so that
it guards only the hardware semaphore acquiring attempt. Additionally,
restore the initial locking in acp_sof_ipc_irq_thread() to synchronize
the handling of immediate replies from DSP core.
Fixes: 802134c8c2 ("ASoC: SOF: amd: Refactor spinlock_irq(&sdev->ipc_lock) sequence in irq_handler")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20240208234315.2182048-1-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a path in rt5645_jack_detect_work(), where rt5645->jd_mutex
is left locked forever. That may lead to deadlock
when rt5645_jack_detect_work() is called for the second time.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: cdba4301ad ("ASoC: rt5650: add mutex to avoid the jack detection failure")
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Link: https://lore.kernel.org/r/1707645514-21196-1-git-send-email-khoroshilov@ispras.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
4 fixes / cleanups to the rt5645 mc driver's codec_name handling:
1. In the for loop looking for the dai_index for the codec, replace
card->dai_link[i] with cht_dailink[i]. The for loop already uses
ARRAY_SIZE(cht_dailink) as bound and card->dai_link is just a pointer to
cht_dailink using card->dai_link only obfuscates that cht_dailink is being
modified directly rather then say a copy of cht_dailink. Using
cht_dailink[i] also makes the code consistent with other machine drivers.
2. Don't set cht_dailink[dai_index].codecs->name in the for loop,
this immediately gets overridden using acpi_dev_name(adev) directly
below the loop.
3. Add a missing break to the loop.
4. Remove the now no longer used (only set, never read) codec_name field
from struct cht_mc_private.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240210134400.24913-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since commit 13f58267cd ("ASoC: soc.h: don't create dummy Component
via COMP_DUMMY()") dummy snd_soc_dai_link.codecs entries no longer
have a name set.
This means that when looking for the codec dai_link the machine
driver can no longer unconditionally run strcmp() on
snd_soc_dai_link.codecs[0].name since this may now be NULL.
Add a check for snd_soc_dai_link.codecs[0].name being NULL to all
BYT/CHT machine drivers to avoid NULL pointer dereferences in
their probe() methods.
Fixes: 13f58267cd ("ASoC: soc.h: don't create dummy Component via COMP_DUMMY()")
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240210134400.24913-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During xfstest tests, there are some kmemleak reports e.g. generic/051 with
if USE_KMEMLEAK=yes:
====================================================================
EXPERIMENTAL kmemleak reported some memory leaks! Due to the way kmemleak
works, the leak might be from an earlier test, or something totally unrelated.
unreferenced object 0xffff9ef905aaf778 (size 8):
comm "mount.bcachefs", pid 169844, jiffies 4295281209 (age 87.040s)
hex dump (first 8 bytes):
a5 cc cc cc cc cc cc cc ........
backtrace:
[<ffffffff87fd9a43>] __kmem_cache_alloc_node+0x1f3/0x2c0
[<ffffffff87f49b66>] kmalloc_trace+0x26/0xb0
[<ffffffffc0a3fefe>] __bch2_read_super+0xfe/0x4e0 [bcachefs]
[<ffffffffc0a3ad22>] bch2_fs_open+0x262/0x1710 [bcachefs]
[<ffffffffc09c9e24>] bch2_mount+0x4c4/0x640 [bcachefs]
[<ffffffff88080c90>] legacy_get_tree+0x30/0x60
[<ffffffff8802c748>] vfs_get_tree+0x28/0xf0
[<ffffffff88061fe5>] path_mount+0x475/0xb60
[<ffffffff880627e5>] __x64_sys_mount+0x105/0x140
[<ffffffff88932642>] do_syscall_64+0x42/0xf0
[<ffffffff88a000e6>] entry_SYSCALL_64_after_hwframe+0x6e/0x76
unreferenced object 0xffff9ef96cdc4fc0 (size 32):
comm "mount.bcachefs", pid 169844, jiffies 4295281209 (age 87.040s)
hex dump (first 32 bytes):
2f 64 65 76 2f 6d 61 70 70 65 72 2f 74 65 73 74 /dev/mapper/test
2d 31 00 cc cc cc cc cc cc cc cc cc cc cc cc cc -1..............
backtrace:
[<ffffffff87fd9a43>] __kmem_cache_alloc_node+0x1f3/0x2c0
[<ffffffff87f4a081>] __kmalloc_node_track_caller+0x51/0x150
[<ffffffff87f3adc2>] kstrdup+0x32/0x60
[<ffffffffc0a3ff1a>] __bch2_read_super+0x11a/0x4e0 [bcachefs]
[<ffffffffc0a3ad22>] bch2_fs_open+0x262/0x1710 [bcachefs]
[<ffffffffc09c9e24>] bch2_mount+0x4c4/0x640 [bcachefs]
[<ffffffff88080c90>] legacy_get_tree+0x30/0x60
[<ffffffff8802c748>] vfs_get_tree+0x28/0xf0
[<ffffffff88061fe5>] path_mount+0x475/0xb60
[<ffffffff880627e5>] __x64_sys_mount+0x105/0x140
[<ffffffff88932642>] do_syscall_64+0x42/0xf0
[<ffffffff88a000e6>] entry_SYSCALL_64_after_hwframe+0x6e/0x76
====================================================================
The leak happens if bdev_open_by_path() failed to open a block device
then it goes label 'out' directly without call of bch2_free_super().
Fix it by going to label 'err' instead of 'out' if bdev_open_by_path()
fails.
Signed-off-by: Su Yue <glass.su@suse.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Jakub Kicinski says:
====================
net: tls: fix some issues with async encryption
valis was reporting a race on socket close so I sat down to try to fix it.
I used Sabrina's async crypto debug patch to test... and in the process
run into some of the same issues, and created very similar fixes :(
I didn't realize how many of those patches weren't applied. Once I found
Sabrina's code [1] it turned out to be so similar in fact that I added
her S-o-b's and Co-develop'eds in a semi-haphazard way.
With this series in place all expected tests pass with async crypto.
Sabrina had a few more fixes, but I'll leave those to her, things are
not crashing anymore.
[1] https://lore.kernel.org/netdev/cover.1694018970.git.sd@queasysnail.net/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We double count async, non-zc rx data. The previous fix was
lucky because if we fully zc async_copy_bytes is 0 so we add 0.
Decrypted already has all the bytes we handled, in all cases.
We don't have to adjust anything, delete the erroneous line.
Fixes: 4d42cd6bc2 ("tls: rx: fix return value for async crypto")
Co-developed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This exact case was fail for async crypto and we weren't
catching it.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
tls_decrypt_sg doesn't take a reference on the pages from clear_skb,
so the put_page() in tls_decrypt_done releases them, and we trigger
a use-after-free in process_rx_list when we try to read from the
partially-read skb.
Fixes: fd31f3996a ("tls: rx: decrypt into a fresh skb")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since we're setting the CRYPTO_TFM_REQ_MAY_BACKLOG flag on our
requests to the crypto API, crypto_aead_{encrypt,decrypt} can return
-EBUSY instead of -EINPROGRESS in valid situations. For example, when
the cryptd queue for AESNI is full (easy to trigger with an
artificially low cryptd.cryptd_max_cpu_qlen), requests will be enqueued
to the backlog but still processed. In that case, the async callback
will also be called twice: first with err == -EINPROGRESS, which it
seems we can just ignore, then with err == 0.
Compared to Sabrina's original patch this version uses the new
tls_*crypt_async_wait() helpers and converts the EBUSY to
EINPROGRESS to avoid having to modify all the error handling
paths. The handling is identical.
Fixes: a54667f672 ("tls: Add support for encryption using async offload accelerator")
Fixes: 94524d8fc9 ("net/tls: Add support for async decryption of tls records")
Co-developed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/netdev/9681d1febfec295449a62300938ed2ae66983f28.1694018970.git.sd@queasysnail.net/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similarly to previous commit, the submitting thread (recvmsg/sendmsg)
may exit as soon as the async crypto handler calls complete().
Reorder scheduling the work before calling complete().
This seems more logical in the first place, as it's
the inverse order of what the submitting thread will do.
Reported-by: valis <sec@valis.email>
Fixes: a42055e8d2 ("net/tls: Add support for async encryption of records for performance")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The submitting thread (one which called recvmsg/sendmsg)
may exit as soon as the async crypto handler calls complete()
so any code past that point risks touching already freed data.
Try to avoid the locking and extra flags altogether.
Have the main thread hold an extra reference, this way
we can depend solely on the atomic ref counter for
synchronization.
Don't futz with reiniting the completion, either, we are now
tightly controlling when completion fires.
Reported-by: valis <sec@valis.email>
Fixes: 0cada33241 ("net/tls: fix race condition causing kernel panic")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Factor out waiting for async encrypt and decrypt to finish.
There are already multiple copies and a subsequent fix will
need more. No functional changes.
Note that crypto_wait_req() returns wait->err
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 5785160732.
Unfortunately, while we only call that thing once, the callback
*can* be called more than once for the same dentry - all it
takes is rename_lock being touched while we are in d_walk().
For now let's revert it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Breno Leitao says:
====================
net: Fix MODULE_DESCRIPTION() for net (p5)
There are hundreds of network modules that misses MODULE_DESCRIPTION(),
causing a warning when compiling with W=1. Example:
WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_cmp.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_nbyte.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_u32.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_meta.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_text.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/sched/em_canid.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ip_tunnel.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ipip.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ip_gre.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/udp_tunnel.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ip_vti.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/ah4.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/esp4.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/xfrm4_tunnel.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv4/tunnel4.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/xfrm/xfrm_algo.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/xfrm/xfrm_user.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/ah6.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/esp6.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/xfrm6_tunnel.o
WARNING: modpost: missing MODULE_DESCRIPTION() in net/ipv6/tunnel6.o
This part5 of the patchset focus on the missing net/ module, which
are now warning free.
v1: https://lore.kernel.org/all/20240205101400.1480521-1-leitao@debian.org/
v2: https://lore.kernel.org/all/20240207101929.484681-1-leitao@debian.org/
====================
Link: https://lore.kernel.org/r/20240208164244.3818498-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a crash when adding one of the lan966x interfaces under a lag
interface. The issue can be reproduced like this:
ip link add name bond0 type bond miimon 100 mode balance-xor
ip link set dev eth0 master bond0
The reason is because when adding a interface under the lag it would go
through all the ports and try to figure out which other ports are under
that lag interface. And the issue is that lan966x can have ports that are
NULL pointer as they are not probed. So then iterating over these ports
it would just crash as they are NULL pointers.
The fix consists in actually checking for NULL pointers before accessing
something from the ports. Like we do in other places.
Fixes: cabc9d4933 ("net: lan966x: Add lag support for lan966x")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240206123054.3052966-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While testing tdc with parallel tests for mirred to block we caught an
intermittent bug. The blockid was being zeroed out when a net device
was deleted and, thus, giving us an incorrect blockid value whenever
we tried to dump the mirred action. Since we don't increment the block
refcount in the control path (and only use the ID), we don't need to
zero the blockid field whenever a net device is going down.
Fixes: 42f39036cd ("net/sched: act_mirred: Allow mirred to block")
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240207222902.1469398-1-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Aaron Conole says:
====================
net: openvswitch: limit the recursions from action sets
Open vSwitch module accepts actions as a list from the netlink socket
and then creates a copy which it uses in the action set processing.
During processing of the action list on a packet, the module keeps a
count of the execution depth and exits processing if the action depth
goes too high.
However, during netlink processing the recursion depth isn't checked
anywhere, and the copy trusts that kernel has large enough stack to
accommodate it. The OVS sample action was the original action which
could perform this kinds of recursion, and it originally checked that
it didn't exceed the sample depth limit. However, when sample became
optimized to provide the clone() semantics, the recursion limit was
dropped.
This series adds a depth limit during the __ovs_nla_copy_actions() call
that will ensure we don't exceed the max that the OVS userspace could
generate for a clone().
Additionally, this series provides a selftest in 2/2 that can be used to
determine if the OVS module is allowing unbounded access. It can be
safely omitted where the ovs selftest framework isn't available.
====================
Link: https://lore.kernel.org/r/20240207132416.1488485-1-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test case into the netlink checks that will show the number of
nested action recursions won't exceed 16. Going to 17 on a small
clone call isn't enough to exhaust the stack on (most) systems, so
it should be safe to run even on systems that don't have the fix
applied.
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240207132416.1488485-3-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ovs module allows for some actions to recursively contain an action
list for complex scenarios, such as sampling, checking lengths, etc.
When these actions are copied into the internal flow table, they are
evaluated to validate that such actions make sense, and these calls
happen recursively.
The ovs-vswitchd userspace won't emit more than 16 recursion levels
deep. However, the module has no such limit and will happily accept
limits larger than 16 levels nested. Prevent this by tracking the
number of recursions happening and manually limiting it to 16 levels
nested.
The initial implementation of the sample action would track this depth
and prevent more than 3 levels of recursion, but this was removed to
support the clone use case, rather than limited at the current userspace
limit.
Fixes: 798c166173 ("openvswitch: Optimize sample action for the clone use cases")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240207132416.1488485-2-aconole@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel says:
====================
selftests: forwarding: Various fixes
Fix various problems in the forwarding selftests so that they will pass
in the netdev CI instead of being ignored. See commit messages for
details.
====================
Link: https://lore.kernel.org/r/20240208155529.1199729-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The redirection test case fails in the netdev CI on debug kernels
because an FDB entry is learned despite the presence of a tc filter that
redirects incoming traffic [1].
I am unable to reproduce the failure locally, but I can see how it can
happen given that learning is first enabled and only then the ingress tc
filter is configured. On debug kernels the time window between these two
operations is longer compared to regular kernels, allowing random
packets to be transmitted and trigger learning.
Fix by reversing the order and configure the ingress tc filter before
enabling learning.
[1]
[...]
# TEST: Locked port MAB redirect [FAIL]
# Locked entry created for redirected traffic
Fixes: 38c43a1ce7 ("selftests: forwarding: Add test case for traffic redirection from a locked port")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240208155529.1199729-5-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Suppress the following grep warnings:
[...]
INFO: # Port group entries configuration tests - (*, G)
TEST: Common port group entries configuration tests (IPv4 (*, G)) [ OK ]
TEST: Common port group entries configuration tests (IPv6 (*, G)) [ OK ]
grep: warning: stray \ before /
grep: warning: stray \ before /
grep: warning: stray \ before /
TEST: IPv4 (*, G) port group entries configuration tests [ OK ]
grep: warning: stray \ before /
grep: warning: stray \ before /
grep: warning: stray \ before /
TEST: IPv6 (*, G) port group entries configuration tests [ OK ]
[...]
They do not fail the test, but do clutter the output.
Fixes: b6d00da086 ("selftests: forwarding: Add bridge MDB test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240208155529.1199729-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After enabling a multicast querier on the bridge (like the test is
doing), the bridge will wait for the Max Response Delay before starting
to forward according to its MDB in order to let Membership Reports
enough time to be received and processed.
Currently, the test is waiting for exactly the default Max Response
Delay (10 seconds) which is racy and leads to failures [1].
Fix by reducing the Max Response Delay to 1 second.
[1]
[...]
# TEST: IPv4 host entries forwarding tests [FAIL]
# Packet locally received after flood
Fixes: b6d00da086 ("selftests: forwarding: Add bridge MDB test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240208155529.1199729-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After enabling a multicast querier on the bridge (like the test is
doing), the bridge will wait for the Max Response Delay before starting
to forward according to its MDB in order to let Membership Reports
enough time to be received and processed.
Currently, the test is waiting for exactly the default Max Response
Delay (10 seconds) which is racy and leads to failures [1].
Fix by reducing the Max Response Delay to 1 second.
[1]
[...]
# TEST: L2 miss - Multicast (IPv4) [FAIL]
# Unregistered multicast filter was hit after adding MDB entry
Fixes: 8c33266ae2 ("selftests: forwarding: Add layer 2 miss test cases")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240208155529.1199729-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test toggles the carrier of a bridge port in order to test the
bridge backup port feature.
Due to the linkwatch delayed work the carrier change is not always
reflected fast enough to the bridge driver and packets are not forwarded
as the test expects, resulting in failures [1].
Fix by busy waiting on the bridge port state until it changes to the
desired state following the carrier change.
[1]
# Backup port
# -----------
[...]
# TEST: swp1 carrier off [ OK ]
# TEST: No forwarding out of swp1 [FAIL]
[ 641.995910] br0: port 1(swp1) entered disabled state
# TEST: No forwarding out of vx0 [ OK ]
Fixes: b408453053 ("selftests: net: Add bridge backup port and backup nexthop ID test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240208123110.1063930-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Space reservations for metadata are, most of the time, pessimistic as we
reserve space for worst possible cases - where tree heights are at the
maximum possible height (8), we need to COW every extent buffer in a tree
path, need to split extent buffers, etc.
For data, we generally reserve the exact amount of space we are going to
allocate. The exception here is when using compression, in which case we
reserve space matching the uncompressed size, as the compression only
happens at writeback time and in the worst possible case we need that
amount of space in case the data is not compressible.
This means that when there's not available space in the corresponding
space_info object, we may need to allocate a new block group, and then
that block group might not be used after all. In this case the block
group is never added to the list of unused block groups and ends up
never being deleted - except if we unmount and mount again the fs, as
when reading block groups from disk we add unused ones to the list of
unused block groups (fs_info->unused_bgs). Otherwise a block group is
only added to the list of unused block groups when we deallocate the
last extent from it, so if no extent is ever allocated, the block group
is kept around forever.
This also means that if we have a bunch of tasks reserving space in
parallel we can end up allocating many block groups that end up never
being used or kept around for too long without being used, which has
the potential to result in ENOSPC failures in case for example we over
allocate too many metadata block groups and then end up in a state
without enough unallocated space to allocate a new data block group.
This is more likely to happen with metadata reservations as of kernel
6.7, namely since commit 28270e25c6 ("btrfs: always reserve space for
delayed refs when starting transaction"), because we started to always
reserve space for delayed references when starting a transaction handle
for a non-zero number of items, and also to try to reserve space to fill
the gap between the delayed block reserve's reserved space and its size.
So to avoid this, when finishing the creation a new block group, add the
block group to the list of unused block groups if it's still unused at
that time. This way the next time the cleaner kthread runs, it will delete
the block group if it's still unused and not needed to satisfy existing
space reservations.
Reported-by: Ivan Shapovalov <intelfx@intelfx.name>
Link: https://lore.kernel.org/linux-btrfs/9cdbf0ca9cdda1b4c84e15e548af7d7f9f926382.camel@intelfx.name/
CC: stable@vger.kernel.org # 6.7+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Before deleting a block group that is in the list of unused block groups
(fs_info->unused_bgs), we check if the block group became used before
deleting it, as extents from it may have been allocated after it was added
to the list.
However even if the block group was not yet used, there may be tasks that
have only reserved space and have not yet allocated extents, and they
might be relying on the availability of the unused block group in order
to allocate extents. The reservation works first by increasing the
"bytes_may_use" field of the corresponding space_info object (which may
first require flushing delayed items, allocating a new block group, etc),
and only later a task does the actual allocation of extents.
For metadata we usually don't end up using all reserved space, as we are
pessimistic and typically account for the worst cases (need to COW every
single node in a path of a tree at maximum possible height, etc). For
data we usually reserve the exact amount of space we're going to allocate
later, except when using compression where we always reserve space based
on the uncompressed size, as compression is only triggered when writeback
starts so we don't know in advance how much space we'll actually need, or
if the data is compressible.
So don't delete an unused block group if the total size of its space_info
object minus the block group's size is less then the sum of used space and
space that may be used (space_info->bytes_may_use), as that means we have
tasks that reserved space and may need to allocate extents from the block
group. In this case, besides skipping the deletion, re-add the block group
to the list of unused block groups so that it may be reconsidered later,
in case the tasks that reserved space end up not needing to allocate
extents from it.
Allowing the deletion of the block group while we have reserved space, can
result in tasks failing to allocate metadata extents (-ENOSPC) while under
a transaction handle, resulting in a transaction abort, or failure during
writeback for the case of data extents.
CC: stable@vger.kernel.org # 6.0+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add a helper function to determine if a block group is being used and make
use of it at btrfs_delete_unused_bgs(). This helper will also be used in
future code changes.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
While running the CI for an unrelated change I hit the following panic
with generic/648 on btrfs_holes_spacecache.
assertion failed: block_start != EXTENT_MAP_HOLE, in fs/btrfs/extent_io.c:1385
------------[ cut here ]------------
kernel BUG at fs/btrfs/extent_io.c:1385!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 2695096 Comm: fsstress Kdump: loaded Tainted: G W 6.8.0-rc2+ #1
RIP: 0010:__extent_writepage_io.constprop.0+0x4c1/0x5c0
Call Trace:
<TASK>
extent_write_cache_pages+0x2ac/0x8f0
extent_writepages+0x87/0x110
do_writepages+0xd5/0x1f0
filemap_fdatawrite_wbc+0x63/0x90
__filemap_fdatawrite_range+0x5c/0x80
btrfs_fdatawrite_range+0x1f/0x50
btrfs_write_out_cache+0x507/0x560
btrfs_write_dirty_block_groups+0x32a/0x420
commit_cowonly_roots+0x21b/0x290
btrfs_commit_transaction+0x813/0x1360
btrfs_sync_file+0x51a/0x640
__x64_sys_fdatasync+0x52/0x90
do_syscall_64+0x9c/0x190
entry_SYSCALL_64_after_hwframe+0x6e/0x76
This happens because we fail to write out the free space cache in one
instance, come back around and attempt to write it again. However on
the second pass through we go to call btrfs_get_extent() on the inode to
get the extent mapping. Because this is a new block group, and with the
free space inode we always search the commit root to avoid deadlocking
with the tree, we find nothing and return a EXTENT_MAP_HOLE for the
requested range.
This happens because the first time we try to write the space cache out
we hit an error, and on an error we drop the extent mapping. This is
normal for normal files, but the free space cache inode is special. We
always expect the extent map to be correct. Thus the second time
through we end up with a bogus extent map.
Since we're deprecating this feature, the most straightforward way to
fix this is to simply skip dropping the extent map range for this failed
range.
I shortened the test by using error injection to stress the area to make
it easier to reproduce. With this patch in place we no longer panic
with my error injection test.
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The commit noted in fixes added a bogus requirement that runtime PM managed
devices need to be in the RPM_ACTIVE state for PME polling. In fact, only
devices in low power states should be polled.
However there's still a requirement that the device config space must be
accessible, which has implications for both the current state of the polled
device and the parent bridge, when present. It's not sufficient to assume
the bridge remains in D0 and cases have been observed where the bridge
passes the D0 test, but the PM state indicates RPM_SUSPENDING and config
space of the polled device becomes inaccessible during pci_pme_wakeup().
Therefore, since the bridge is already effectively required to be in the
RPM_ACTIVE state, formalize this in the code and elevate the PM usage count
to maintain the state while polling the subordinate device.
This resolves a regression reported in the bugzilla below where a
Thunderbolt/USB4 hierarchy fails to scan for an attached NVMe endpoint
downstream of a bridge in a D3hot power state.
Link: https://lore.kernel.org/r/20240123185548.1040096-1-alex.williamson@redhat.com
Fixes: d3fcd73603 ("PCI: Fix runtime PM race with PME polling")
Reported-by: Sanath S <sanath.s@amd.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218360
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Sanath S <sanath.s@amd.com>
Reviewed-by: Rafael J. Wysocki <rafael@kernel.org>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
The generic constraint "i" seems to be copied from x86 or arm (and with
a redundant generic operand modifier "c"). It works with -fno-PIE but
not with -fPIE/-fPIC in GCC's aarch64 port.
The machine constraint "S", which denotes a symbol or label reference
with a constant offset, supports PIC and has been available in GCC since
2012 and in Clang since 7.0. However, Clang before 19 does not support
"S" on a symbol with a constant offset [1] (e.g.
`static_key_false(&nf_hooks_needed[pf][hook])` in
include/linux/netfilter.h), so we use "i" as a fallback.
Suggested-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Fangrui Song <maskray@google.com>
Link: https://github.com/llvm/llvm-project/pull/80255 [1]
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240206074552.541154-1-maskray@google.com
Signed-off-by: Will Deacon <will@kernel.org>
When we are in a syscall we will only save the FPSIMD subset even though
the task still has access to the full register set, and on context switch
we will only remove TIF_SVE when loading the register state. This means
that the signal handling code should not assume that TIF_SVE means that
the register state is stored in SVE format, it should instead check the
format that was recorded during save.
Fixes: 8c845e2731 ("arm64/sve: Leave SVE enabled on syscall if we don't context switch")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240130-arm64-sve-signal-regs-v2-1-9fc6f9502782@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
the driver currently fails to compile on 6.8-rc3 due to:
| spi-ppc4xx.c: In function ‘spi_ppc4xx_of_probe’:
| @346:36: error: invalid use of undefined type ‘struct platform_device’
| 346 | struct device_node *np = op->dev.of_node;
| | ^~
| ... (more similar errors)
it was working with 6.7. Looks like it only needed the include
and its compiling fine!
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Link: https://lore.kernel.org/r/3eb3f9c4407ba99d1cd275662081e46b9e839173.1707490664.git.chunkeey@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver never uses the IRQ1_CFG register so there's no need to provide
a default value. It's set as a readable register only for debugging
through the regmap registers file.
A system-specific firmware could overwrite this register with a non-default
value. Therefore the driver can't hardcode what the initial value actually
is. As the register is only for debugging the value can be left unknown
until someone wants to read it through debugfs.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240209145700.1555950-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It looks like all distributions will enable INIT_STACK_ALL_ZERO.
Reflect that in the default configurations.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
CONFIG_COMPAT is disabled by default, however compat code still needs to
be compile tested. Add a compat topic configuration target which allows to
enable it easily.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Commit 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic
CS35L56 amplifier") adds configs SND_HDA_SCODEC_CS35L56_{I2C,SPI},
which selects the non-existing config CS_DSP. Note the renaming in
commit d7cfdf17cb ("firmware: cs_dsp: Rename KConfig symbol CS_DSP ->
FW_CS_DSP"), though.
Select the intended config FW_CS_DSP.
This broken select command probably was not noticed as the configs also
select SND_HDA_CS_DSP_CONTROLS and this then selects FW_CS_DSP. So, the
select FW_CS_DSP could actually be dropped, but we will keep this
redundancy in place as the author originally also intended to have this
redundancy of selects in place.
Fixes: 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240209082044.3981-1-lukas.bulwahn@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Similar to the existing "ports" node name, coresight device tree bindings
have added "in-ports" and "out-ports" as standard node names for a
collection of ports.
Add support for these name to of_graph_get_port_parent() so that
remote-endpoint parsing can find the correct parent node for these
coresight ports too.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20240207011803.2637531-4-saravanak@google.com
Signed-off-by: Rob Herring <robh@kernel.org>
After commit 4a032827da ("of: property: Simplify of_link_to_phandle()"),
remote-endpoint properties created a fwnode link from the consumer device
to the supplier endpoint. This is a tiny bit inefficient (not buggy) when
trying to create device links or detecting cycles. So, improve this the
same way we improved finding the consumer of a remote-endpoint property.
Fixes: 4a032827da ("of: property: Simplify of_link_to_phandle()")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20240207011803.2637531-3-saravanak@google.com
Signed-off-by: Rob Herring <robh@kernel.org>
We have a more accurate function to find the right consumer of a
remote-endpoint property instead of searching for a parent with
compatible string property. So, use that instead. While at it, make the
code to find the consumer a bit more flexible and based on the property
being parsed.
Fixes: f7514a6630 ("of: property: fw_devlink: Add support for remote-endpoint")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20240207011803.2637531-2-saravanak@google.com
Signed-off-by: Rob Herring <robh@kernel.org>
This reverts commit 398aa9a7e7.
The update to the gadget API to support EBC feature is incomplete. It's
missing at least the following:
* New usage documentation
* Gadget capability check
* Condition for the user to check how many and which endpoints can be
used as "fifo_mode"
* Description of how it can affect completed request (e.g. dwc3 won't
update TRB on completion -- ie. how it can affect request's actual
length report)
Let's revert this until it's ready.
Fixes: 398aa9a7e7 ("usb: dwc3: Support EBC feature of DWC_usb31")
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/3042f847ff904b4dd4e4cf66a1b9df470e63439e.1707441690.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
steal_time is not used outside paravirt.c, make it static,
as sparse suggested.
Fixes: fdf68acccf ("RISC-V: paravirt: Implement steal-time support")
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
sizeof(struct virtio_crypto_akcipher_session_para) is less than
sizeof(struct virtio_crypto_op_ctrl_req::u), copying more bytes from
stack variable leads stack overflow. Clang reports this issue by
commands:
make -j CC=clang-14 mrproper >/dev/null 2>&1
make -j O=/tmp/crypto-build CC=clang-14 allmodconfig >/dev/null 2>&1
make -j O=/tmp/crypto-build W=1 CC=clang-14 drivers/crypto/virtio/
virtio_crypto_akcipher_algs.o
Fixes: 59ca6c9338 ("virtio-crypto: implement RSA algorithm")
Link: https://lore.kernel.org/all/0a194a79-e3a3-45e7-be98-83abd3e1cb7e@roeck-us.net/
Cc: <stable@vger.kernel.org>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Recently, handshake_req_destroy_test1 started failing:
Expected handshake_req_destroy_test == req, but
handshake_req_destroy_test == 0000000000000000
req == 0000000060f99b40
not ok 11 req_destroy works
This is because "sock_release(sock)" was replaced with "fput(filp)"
to address a memory leak. Note that sock_release() is synchronous
but fput() usually delays the final close and clean-up.
The delay is not consequential in the other cases that were changed
but handshake_req_destroy_test1 is testing that handshake_req_cancel()
followed by closing the file actually does call the ->hp_destroy
method. Thus the PTR_EQ test at the end has to be sure that the
final close is complete before it checks the pointer.
We cannot use a completion here because if ->hp_destroy is never
called (ie, there is an API bug) then the test will hang.
Reported by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/netdev/ZcKDd1to4MPANCrn@tissot.1015granger.net/T/#mac5c6299f86799f1c71776f3a07f9c566c7c3c40
Fixes: 4a0f07d71b ("net/handshake: Fix memory leak in __sock_create() and sock_alloc_file()")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://lore.kernel.org/r/170724699027.91401.7839730697326806733.stgit@oracle-102.nfsv4bat.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recently, I've been hitting following deadlock warning during dpll pin
dump:
[52804.637962] ======================================================
[52804.638536] WARNING: possible circular locking dependency detected
[52804.639111] 6.8.0-rc2jiri+ #1 Not tainted
[52804.639529] ------------------------------------------------------
[52804.640104] python3/2984 is trying to acquire lock:
[52804.640581] ffff88810e642678 (nlk_cb_mutex-GENERIC){+.+.}-{3:3}, at: netlink_dump+0xb3/0x780
[52804.641417]
but task is already holding lock:
[52804.642010] ffffffff83bde4c8 (dpll_lock){+.+.}-{3:3}, at: dpll_lock_dumpit+0x13/0x20
[52804.642747]
which lock already depends on the new lock.
[52804.643551]
the existing dependency chain (in reverse order) is:
[52804.644259]
-> #1 (dpll_lock){+.+.}-{3:3}:
[52804.644836] lock_acquire+0x174/0x3e0
[52804.645271] __mutex_lock+0x119/0x1150
[52804.645723] dpll_lock_dumpit+0x13/0x20
[52804.646169] genl_start+0x266/0x320
[52804.646578] __netlink_dump_start+0x321/0x450
[52804.647056] genl_family_rcv_msg_dumpit+0x155/0x1e0
[52804.647575] genl_rcv_msg+0x1ed/0x3b0
[52804.648001] netlink_rcv_skb+0xdc/0x210
[52804.648440] genl_rcv+0x24/0x40
[52804.648831] netlink_unicast+0x2f1/0x490
[52804.649290] netlink_sendmsg+0x36d/0x660
[52804.649742] __sock_sendmsg+0x73/0xc0
[52804.650165] __sys_sendto+0x184/0x210
[52804.650597] __x64_sys_sendto+0x72/0x80
[52804.651045] do_syscall_64+0x6f/0x140
[52804.651474] entry_SYSCALL_64_after_hwframe+0x46/0x4e
[52804.652001]
-> #0 (nlk_cb_mutex-GENERIC){+.+.}-{3:3}:
[52804.652650] check_prev_add+0x1ae/0x1280
[52804.653107] __lock_acquire+0x1ed3/0x29a0
[52804.653559] lock_acquire+0x174/0x3e0
[52804.653984] __mutex_lock+0x119/0x1150
[52804.654423] netlink_dump+0xb3/0x780
[52804.654845] __netlink_dump_start+0x389/0x450
[52804.655321] genl_family_rcv_msg_dumpit+0x155/0x1e0
[52804.655842] genl_rcv_msg+0x1ed/0x3b0
[52804.656272] netlink_rcv_skb+0xdc/0x210
[52804.656721] genl_rcv+0x24/0x40
[52804.657119] netlink_unicast+0x2f1/0x490
[52804.657570] netlink_sendmsg+0x36d/0x660
[52804.658022] __sock_sendmsg+0x73/0xc0
[52804.658450] __sys_sendto+0x184/0x210
[52804.658877] __x64_sys_sendto+0x72/0x80
[52804.659322] do_syscall_64+0x6f/0x140
[52804.659752] entry_SYSCALL_64_after_hwframe+0x46/0x4e
[52804.660281]
other info that might help us debug this:
[52804.661077] Possible unsafe locking scenario:
[52804.661671] CPU0 CPU1
[52804.662129] ---- ----
[52804.662577] lock(dpll_lock);
[52804.662924] lock(nlk_cb_mutex-GENERIC);
[52804.663538] lock(dpll_lock);
[52804.664073] lock(nlk_cb_mutex-GENERIC);
[52804.664490]
The issue as follows: __netlink_dump_start() calls control->start(cb)
with nlk->cb_mutex held. In control->start(cb) the dpll_lock is taken.
Then nlk->cb_mutex is released and taken again in netlink_dump(), while
dpll_lock still being held. That leads to ABBA deadlock when another
CPU races with the same operation.
Fix this by moving dpll_lock taking into dumpit() callback which ensures
correct lock taking order.
Fixes: 9d71b54b65 ("dpll: netlink: Add DPLL framework base functions")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Link: https://lore.kernel.org/r/20240207115902.371649-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the directory passed to the '.. kernel-feat::' directive does not
exist or the get_feat.pl script does not find any files to extract
features from, Sphinx will report the following error:
Sphinx parallel build error:
UnboundLocalError: local variable 'fname' referenced before assignment
make[2]: *** [Documentation/Makefile:102: htmldocs] Error 2
This is due to how I changed the script in c48a7c44a1 ("docs:
kernel_feat.py: fix potential command injection"). Before that, the
filename passed along to self.nestedParse() in this case was weirdly
just the whole get_feat.pl invocation.
We can fix it by doing what kernel_abi.py does -- just pass
self.arguments[0] as 'fname'.
Fixes: c48a7c44a1 ("docs: kernel_feat.py: fix potential command injection")
Cc: Justin Forbes <jforbes@fedoraproject.org>
Cc: Salvatore Bonaccorso <carnil@debian.org>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Link: https://lore.kernel.org/r/20240205175133.774271-2-vegard.nossum@oracle.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
With the change in the widget free logic to power down the cores only
when the scheduler widgets are freed, we need to ensure that the
scheduler widget is freed only after all the widgets associated with the
scheduler are freed. This is to ensure that the secondary core that the
scheduler is scheduled to run on is kept powered on until all widgets
that need them are in use. While this works well for dynamic pipelines,
in the case of static pipelines the current logic does not take this into
account and frees all widgets in the order they occur in the
widget_list. So, modify this to ensure that the scheduler widgets are freed
only after all other types of widgets in the widget_list are freed.
Link: https://github.com/thesofproject/linux/issues/4807
Fixes: 31ed8da1c8 ("ASoC: SOF: sof-audio: Modify logic for enabling/disabling topology cores")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20240208133432.1688-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rewrite the handling of ASP1 TX mixer mux initialization to prevent a
deadlock during component_remove().
The firmware can overwrite the ASP1 TX mixer registers with
system-specific settings. This is mainly for hardware that uses the
ASP as a chip-to-chip link controlled by the firmware. Because of this
the driver cannot know the starting state of the ASP1 mixer muxes until
the firmware has been downloaded and rebooted.
The original workaround for this was to queue a work function from the
dsp_work() job. This work then read the register values (populating the
regmap cache the first time around) and then called
snd_soc_dapm_mux_update_power(). The problem with this is that it was
ultimately triggered by cs35l56_component_probe() queueing dsp_work,
which meant that it would be running in parallel with the rest of the
ASoC component and card initialization. To prevent accessing DAPM before
it was fully initialized the work function took the card mutex. But this
would deadlock if cs35l56_component_remove() was called before the work job
had completed, because ASoC calls component_remove() with the card mutex
held.
This new version removes the work function. Instead the regmap cache and
DAPM mux widgets are initialized the first time any of the associated ALSA
controls is read or written.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 07f7d6e7a1 ("ASoC: cs35l56: Fix for initializing ASP1 mixer registers")
Link: https://lore.kernel.org/r/20240208123742.1278104-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A DoS tool that injects loads of authentication frames made our AP
crash. The iwl_mvm_is_dup() function couldn't find the per-queue
dup_data which was not allocated.
The root cause for that is that we ran out of stations in the firmware
and we didn't really add the station to the firmware, yet we didn't
return an error to mac80211.
Mac80211 was thinking that we have the station and because of that,
sta_info::uploaded was set to 1. This allowed
ieee80211_find_sta_by_ifaddr() to return a valid station object, but
that ieee80211_sta didn't have any iwl_mvm_sta object initialized and
that caused the crash mentioned earlier when we got Rx on that station.
Cc: stable@vger.kernel.org
Fixes: 57974a55d9 ("wifi: iwlwifi: mvm: refactor iwl_mvm_mac_sta_state_common()")
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206175739.1f76c44b2486.I6a00955e2842f15f0a089db2f834adb9d10fbe35@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As described in IEEE sta 802.11-2020, table 9-30 (Address
field contents), A-MSDU address 3 should contain the BSSID
address.
In TX_CMD we copy the MAC header from skb, and skb address 3
holds the destination address, but it may not be identical to
the BSSID.
Using the wrong destination address appears to work with (most)
receivers without MLO, but in MLO some devices are checking for
it carefully, perhaps as a consequence of link to MLD address
translation.
Replace address 3 in the TX_CMD MAC header with the correct
address while retaining the skb address 3 unchanged.
This ensures that skb address 3 will be utilized later for
constructing the A-MSDU subframes.
Note that we fill in the MLD address, but the firmware will do the
necessary translation to link address after encryption.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240204235836.4583a1bf9188.I3f8e7892bdf8f86b4daa28453771a8c9817b2416@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
submit_flushes
atomic_set(&mddev->flush_pending, 1);
rdev_for_each_rcu(rdev, mddev)
atomic_inc(&mddev->flush_pending);
bi->bi_end_io = md_end_flush
submit_bio(bi);
/* flush io is done first */
md_end_flush
if (atomic_dec_and_test(&mddev->flush_pending))
percpu_ref_put(&mddev->active_io)
-> active_io is not released
if (atomic_dec_and_test(&mddev->flush_pending))
-> missing release of active_io
For consequence, mddev_suspend() will wait for 'active_io' to be zero
forever.
Fix this problem by releasing 'active_io' in submit_flushes() if
'flush_pending' is decreased to zero.
Fixes: fa2bbff7b0 ("md: synchronize flush io with array reconfiguration")
Cc: stable@vger.kernel.org # v6.1+
Reported-by: Blazej Kucman <blazej.kucman@linux.intel.com>
Closes: https://lore.kernel.org/lkml/20240130172524.0000417b@linux.intel.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240201092559.910982-7-yukuai1@huaweicloud.com
When we added mount_setattr() I added additional checks compared to the
legacy do_reconfigure_mnt() and do_change_type() helpers used by regular
mount(2). If that mount had a parent then verify that the caller and the
mount namespace the mount is attached to match and if not make sure that
it's an anonymous mount.
The real rootfs falls into neither category. It is neither an anoymous
mount because it is obviously attached to the initial mount namespace
but it also obviously doesn't have a parent mount. So that means legacy
mount(2) allows changing mount properties on the real rootfs but
mount_setattr(2) blocks this. I never thought much about this but of
course someone on this planet of earth changes properties on the real
rootfs as can be seen in [1].
Since util-linux finally switched to the new mount api in 2.39 not so
long ago it also relies on mount_setattr() and that surfaced this issue
when Fedora 39 finally switched to it. Fix this.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2256843
Link: https://lore.kernel.org/r/20240206-vfs-mount-rootfs-v1-1-19b335eee133@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Karel Zak <kzak@redhat.com>
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Christian Brauner <brauner@kernel.org>
Commit 64db3e8d7b ("regulator: dt-bindings: microchip,mcp16502: convert
to YAML") converts mcp16502-regulator.txt to microchip,mcp16502.yaml, but
misses to adjust its reference in MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Repair this file reference in MICROCHIP MCP16502 PMIC DRIVER.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20240207132231.16392-1-lukas.bulwahn@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Georgi writes:
interconnect fixes for v6.8-rc
These are tiny fixes for reported issues in driver code for a few
platforms. One of them sorts out a hang issue, the other improves
the power consumption and the rest are fixing some bitmasks to make
sure the hardware does thing right.
- interconnect: qcom: sc8180x: Mark CO0 BCM keepalive
- interconnect: qcom: sm8550: Enable sync_state
- interconnect: qcom: sm8650: Use correct ACV enable_mask
- interconnect: qcom: x1e80100: Add missing ACV enable_mask
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: x1e80100: Add missing ACV enable_mask
interconnect: qcom: sm8650: Use correct ACV enable_mask
interconnect: qcom: sm8550: Enable sync_state
interconnect: qcom: sc8180x: Mark CO0 BCM keepalive
Instead of incrementing the base of the global reg fields, which renders
the second instance of the repeater broken due to wrong offsets, use
regmap with base and offset. As for zeroing out the rest of the tuning
regs, avoid looping though the table and just use the table as is,
as it is already zero initialized.
Fixes: 99a517a582 ("phy: qualcomm: phy-qcom-eusb2-repeater: Zero out untouched tuning regs")
Tested-by: Elliot Berman <quic_eberman@quicinc.com> # sm8650-qrd
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20240201-phy-qcom-eusb2-repeater-fixes-v4-1-cf18c8cef6d7@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Initialize the qDMA irqs after the registers are configured so that
interrupts that may have been pending from a primary kernel don't get
processed by the irq handler before it is ready to and cause panic with
the following trace:
Call trace:
fsl_qdma_queue_handler+0xf8/0x3e8
__handle_irq_event_percpu+0x78/0x2b0
handle_irq_event_percpu+0x1c/0x68
handle_irq_event+0x44/0x78
handle_fasteoi_irq+0xc8/0x178
generic_handle_irq+0x24/0x38
__handle_domain_irq+0x90/0x100
gic_handle_irq+0x5c/0xb8
el1_irq+0xb8/0x180
_raw_spin_unlock_irqrestore+0x14/0x40
__setup_irq+0x4bc/0x798
request_threaded_irq+0xd8/0x190
devm_request_threaded_irq+0x74/0xe8
fsl_qdma_probe+0x4d4/0xca8
platform_drv_probe+0x50/0xa0
really_probe+0xe0/0x3f8
driver_probe_device+0x64/0x130
device_driver_attach+0x6c/0x78
__driver_attach+0xbc/0x158
bus_for_each_dev+0x5c/0x98
driver_attach+0x20/0x28
bus_add_driver+0x158/0x220
driver_register+0x60/0x110
__platform_driver_register+0x44/0x50
fsl_qdma_driver_init+0x18/0x20
do_one_initcall+0x48/0x258
kernel_init_freeable+0x1a4/0x23c
kernel_init+0x10/0xf8
ret_from_fork+0x10/0x18
Cc: stable@vger.kernel.org
Fixes: b092529e0a ("dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs")
Signed-off-by: Curtis Klein <curtis.klein@hpe.com>
Signed-off-by: Yi Zhao <yi.zhao@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240201220406.440145-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There is chip (ls1028a) errata:
The SoC may hang on 16 byte unaligned read transactions by QDMA.
Unaligned read transactions initiated by QDMA may stall in the NOC
(Network On-Chip), causing a deadlock condition. Stalled transactions will
trigger completion timeouts in PCIe controller.
Workaround:
Enable prefetch by setting the source descriptor prefetchable bit
( SD[PF] = 1 ).
Implement this workaround.
Cc: stable@vger.kernel.org
Fixes: b092529e0a ("dmaengine: fsl-qdma: Add qDMA controller driver for Layerscape SoCs")
Signed-off-by: Peng Ma <peng.ma@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240201215007.439503-1-Frank.Li@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The current check of ch_en enabled to know the maximum number of available
hardware channels is wrong as it check the number of ch_en register set
but all of them are unset at probe. This register is set at the
dw_hdma_v0_core_start function which is run lately before a DMA transfer.
The HDMA IP have no way to know the number of hardware channels available
like the eDMA IP, then let set it to maximum channels and let the platform
set the right number of channels.
Fixes: e74c39573d ("dmaengine: dw-edma: Add support for native HDMA")
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240129-b4-feature_hdma_mainline-v7-1-8e8c1acb7a46@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
If KUnit is built as a module, and it's unloaded, the kunit_bus is not
unregistered. This causes an error if it's then re-loaded later, as we
try to re-register the bus.
Unregister the bus and root_device on shutdown, if it looks valid.
In addition, be more specific about the value of kunit_bus_device. It
is:
- a valid struct device* if the kunit_bus initialised correctly.
- an ERR_PTR if it failed to initialise.
- NULL before initialisation and after shutdown.
Fixes: d03c720e03 ("kunit: Add APIs for managing devices")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Rae Moar <rmoar@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This reverts commit 0921244f6f.
It broke CPU hotplugging because it modifies the __cpu_possible_mask
after bootup, so that it will be different than nr_cpu_ids, which
then effictively breaks the workqueue setup code and triggers crashes
when shutting down CPUs at runtime.
Guenter was the first who noticed the wrong values in __cpu_possible_mask,
since the cpumask Kunit tests were failig.
Reverting this commit fixes both issues, but sadly brings back this
uncritical runtime warning:
register_cpu_capacity_sysctl: too early to get CPU4 device!
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lkml.org/lkml/2024/2/4/146
Link: https://lore.kernel.org/lkml/Zb0mbHlIud_bqftx@slm.duckdns.org/t/
Cc: stable@vger.kernel.org # 6.0+
Drop dirty_log_page_splitting_test's assertion that the number of 4KiB
pages remains the same across dirty logging being enabled and disabled, as
the test doesn't guarantee that mappings outside of the memslots being
dirty logged are stable, e.g. KVM's mappings for code and pages in
memslot0 can be zapped by things like NUMA balancing.
To preserve the spirit of the check, assert that (a) the number of 4KiB
pages after splitting is _at least_ the number of 4KiB pages across all
memslots under test, and (b) the number of hugepages before splitting adds
up to the number of pages across all memslots under test. (b) is a little
tenuous as it relies on memslot0 being incompatible with transparent
hugepages, but that holds true for now as selftests explicitly madvise()
MADV_NOHUGEPAGE for memslot0 (__vm_create() unconditionally specifies the
backing type as VM_MEM_SRC_ANONYMOUS).
Reported-by: Yi Lai <yi1.lai@intel.com>
Reported-by: Tao Su <tao1.su@linux.intel.com>
Reviewed-by: Tao Su <tao1.su@linux.intel.com>
Link: https://lore.kernel.org/r/20240131222728.4100079-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When finishing the final iteration of dirty_log_test testcase, set
host_quit _before_ the final "continue" so that the vCPU worker doesn't
run an extra iteration, and delete the hack-a-fix of an extra "continue"
from the dirty ring testcase. This fixes a bug where the extra post to
sem_vcpu_cont may not be consumed, which results in failures in subsequent
runs of the testcases. The bug likely was missed during development as
x86 supports only a single "guest mode", i.e. there aren't any subsequent
testcases after the dirty ring test, because for_each_guest_mode() only
runs a single iteration.
For the regular dirty log testcases, letting the vCPU run one extra
iteration is a non-issue as the vCPU worker waits on sem_vcpu_cont if and
only if the worker is explicitly told to stop (vcpu_sync_stop_requested).
But for the dirty ring test, which needs to periodically stop the vCPU to
reap the dirty ring, letting the vCPU resume the guest _after_ the last
iteration means the vCPU will get stuck without an extra "continue".
However, blindly firing off an post to sem_vcpu_cont isn't guaranteed to
be consumed, e.g. if the vCPU worker sees host_quit==true before resuming
the guest. This results in a dangling sem_vcpu_cont, which leads to
subsequent iterations getting out of sync, as the vCPU worker will
continue on before the main task is ready for it to resume the guest,
leading to a variety of asserts, e.g.
==== Test Assertion Failure ====
dirty_log_test.c:384: dirty_ring_vcpu_ring_full
pid=14854 tid=14854 errno=22 - Invalid argument
1 0x00000000004033eb: dirty_ring_collect_dirty_pages at dirty_log_test.c:384
2 0x0000000000402d27: log_mode_collect_dirty_pages at dirty_log_test.c:505
3 (inlined by) run_test at dirty_log_test.c:802
4 0x0000000000403dc7: for_each_guest_mode at guest_modes.c:100
5 0x0000000000401dff: main at dirty_log_test.c:941 (discriminator 3)
6 0x0000ffff9be173c7: ?? ??:0
7 0x0000ffff9be1749f: ?? ??:0
8 0x000000000040206f: _start at ??:?
Didn't continue vcpu even without ring full
Alternatively, the test could simply reset the semaphores before each
testcase, but papering over hacks with more hacks usually ends in tears.
Reported-by: Shaoqin Huang <shahuang@redhat.com>
Fixes: 84292e5659 ("KVM: selftests: Add dirty ring buffer test")
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Link: https://lore.kernel.org/r/20240202231831.354848-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
commit dfad37051a ("remap_range: move permission hooks out of
do_clone_file_range()") moved the permission hooks from
do_clone_file_range() out to its caller vfs_clone_file_range(),
but left all the fast sanity checks in do_clone_file_range().
This makes the expensive security hooks be called in situations
that they would not have been called before (e.g. fs does not support
clone).
The only reason for the do_clone_file_range() helper was that overlayfs
did not use to be able to call vfs_clone_file_range() from copy up
context with sb_writers lock held. However, since commit c63e56a4a6
("ovl: do not open/llseek lower file with upper sb_writers held"),
overlayfs just uses an open coded version of vfs_clone_file_range().
Merge_clone_file_range() into vfs_clone_file_range(), restoring the
original order of checks as it was before the regressing commit and adapt
the overlayfs code to call vfs_clone_file_range() before the permission
hooks that were added by commit ca7ab48240 ("ovl: add permission hooks
outside of do_splice_direct()").
Note that in the merge of do_clone_file_range(), the file_start_write()
context was reduced to cover ->remap_file_range() without holding it
over the permission hooks, which was the reason for doing the regressing
commit in the first place.
Reported-and-tested-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202401312229.eddeb9a6-oliver.sang@intel.com
Fixes: dfad37051a ("remap_range: move permission hooks out of do_clone_file_range()")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20240202102258.1582671-1-amir73il@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
For small bitmaps that aren't PAGE_SIZE aligned *and* that are less than
512 pages in bitmap length, use an extra page to be able to cover the
entire range e.g. [1M..3G] which would be iterated more efficiently in a
single iteration, rather than two.
Fixes: b058ea3ab5 ("vfio/iova_bitmap: refactor iova_bitmap_set() to better handle page boundaries")
Link: https://lore.kernel.org/r/20240202133415.23819-10-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Tested-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Leverage previously added MOCK_FLAGS_DEVICE_HUGE_IOVA flag to create an
IOMMU domain with more than MOCK_IO_PAGE_SIZE supported.
Plumb the hugetlb backing memory for buffer allocation and change the
expected page size to MOCK_HUGE_PAGE_SIZE (1M) when hugepage variant test
cases are used. These so far are limited to 128M and 256M IOVA range tests
cases which is when 1M hugepages can be used.
Link: https://lore.kernel.org/r/20240202133415.23819-9-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add support to mock iommu hugepages of 1M (for a 2K mock io page size). To
avoid breaking test suite defaults, the way this is done is by explicitly
creating a iommu mock device which has hugepage support (i.e. through
MOCK_FLAGS_DEVICE_HUGE_IOVA).
The same scheme is maintained of mock base page index tracking in the
XArray, except that an extra bit is added to mark it as a hugepage. One
subpage containing the dirty bit, means that the whole hugepage is dirty
(similar to AMD IOMMU non-standard page sizes). For clearing, same thing
applies, and it must clear all dirty subpages.
This is in preparation for dirty tracking to mark mock hugepages as
dirty to exercise all the iova-bitmap fixes.
Link: https://lore.kernel.org/r/20240202133415.23819-8-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Move the clearing of the dirty bit of the mock domain into
mock_domain_test_and_clear_dirty() helper, simplifying the caller
function.
Additionally, rework the mock_domain_read_and_clear_dirty() loop to
iterate over a potentially variable IO page size. No functional change
intended with the loop refactor.
This is in preparation for dirty tracking support for IOMMU hugepage mock
domains.
Link: https://lore.kernel.org/r/20240202133415.23819-7-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Rework the functions that test and set the bitmaps to receive a new
parameter (the pte_page_size) that reflects the expected PTE size in the
page tables. The same scheme is still used i.e. even bits are dirty and
odd page indexes aren't dirty. Here it just refactors to consider the size
of the PTE rather than hardcoded to IOMMU mock base page assumptions.
While at it, refactor dirty bitmap tests to use the idev_id created by the
fixture instead of creating a new one.
This is in preparation for doing tests with IOMMU hugepages where multiple
bits set as part of recording a whole hugepage as dirty and thus the
pte_page_size will vary depending on io hugepages or io base pages.
Link: https://lore.kernel.org/r/20240202133415.23819-6-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
IOVA bitmap is a zero-copy scheme of recording dirty bits that iterate the
different bitmap user pages at chunks of a maximum of
PAGE_SIZE/sizeof(struct page*) pages.
When the iterations are split up into 64G, the end of the range may be
broken up in a way that's aligned with a non base page PTE size. This
leads to only part of the huge page being recorded in the bitmap. Note
that in pratice this is only a problem for IOMMU dirty tracking i.e. when
the backing PTEs are in IOMMU hugepages and the bitmap is in base page
granularity. So far this not something that affects VF dirty trackers
(which reports and records at the same granularity).
To fix that, if there is a remainder of bits left to set in which the
current IOVA bitmap doesn't cover, make a copy of the bitmap structure and
iterate-and-set the rest of the bits remaining. Finally, when advancing
the iterator, skip all the bits that were set ahead.
Link: https://lore.kernel.org/r/20240202133415.23819-5-joao.m.martins@oracle.com
Reported-by: Avihai Horon <avihaih@nvidia.com>
Fixes: f35f22cc76 ("iommu/vt-d: Access/Dirty bit support for SS domains")
Fixes: 421a511a29 ("iommu/amd: Access/Dirty bit support in IOPTEs")
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Tested-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Exercise the dirty tracking bitmaps with byte unaligned addresses in
addition to the PAGE_SIZE unaligned bitmaps, using a address towards the
end of the page boundary.
In doing so, increase the tailroom we allocate for the bitmap from
MOCK_PAGE_SIZE(2K) into PAGE_SIZE(4K), such that we can test end of bitmap
boundary.
Link: https://lore.kernel.org/r/20240202133415.23819-4-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
iova_bitmap_mapped_length() don't deal correctly with the small bitmaps
(< 2M bitmaps) when the starting address isn't u64 aligned, leading to
skipping a tiny part of the IOVA range. This is materialized as not
marking data dirty that should otherwise have been.
Fix that by using a u8 * in the internal state of IOVA bitmap. Most of the
data structures use the type of the bitmap to adjust its indexes, thus
changing the type of the bitmap decreases the granularity of the bitmap
indexes.
Fixes: b058ea3ab5 ("vfio/iova_bitmap: refactor iova_bitmap_set() to better handle page boundaries")
Link: https://lore.kernel.org/r/20240202133415.23819-3-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Tested-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Dirty IOMMU hugepages reported on a base page page-size granularity can
lead to an attempt to set dirty pages in the bitmap beyond the limits that
are pinned.
Bounds check the page index of the array we are trying to access is within
the limits before we kmap() and return otherwise.
While it is also a defensive check, this is also in preparation to defer
setting bits (outside the mapped range) to the next iteration(s) when the
pages become available.
Fixes: b058ea3ab5 ("vfio/iova_bitmap: refactor iova_bitmap_set() to better handle page boundaries")
Link: https://lore.kernel.org/r/20240202133415.23819-2-joao.m.martins@oracle.com
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Tested-by: Avihai Horon <avihaih@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
If a input device is opened before hid_hw_start is called, events may
not be received from the hardware. In the case of USB-backed devices,
for example, the hid_hw_start function is responsible for filling in
the URB which is submitted when the input device is opened. If a device
is opened prematurely, polling will never start because the device will
not have been in the correct state to send the URB.
Because the wacom driver registers its input devices before calling
hid_hw_start, there is a window of time where a device can be opened
and end up in an inoperable state. Some ARM-based Chromebooks in particular
reliably trigger this bug.
This commit splits the wacom_register_inputs function into two pieces.
One which is responsible for setting up the allocated inputs (and runs
prior to hid_hw_start so that devices are ready for any input events
they may end up receiving) and another which only registers the devices
(and runs after hid_hw_start to ensure devices can be immediately opened
without issue). Note that the functions to initialize the LEDs and remotes
are also moved after hid_hw_start to maintain their own dependency chains.
Fixes: 7704ac9373 ("HID: wacom: implement generic HID handling for pen generic devices")
Cc: stable@vger.kernel.org # v3.18+
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Since commit 680ee411a9 ("HID: logitech-hidpp: Fix connect event race")
the following messages appear in the kernel log from time to time:
logitech-hidpp-device 0003:046D:408A.0005: HID++ 4.5 device connected.
logitech-hidpp-device 0003:046D:408A.0005: HID++ 4.5 device connected.
logitech-hidpp-device 0003:046D:4051.0006: Disconnected
logitech-hidpp-device 0003:046D:408A.0005: Disconnected
As discussed, print the first per-device "device connected" message
at info level, demoting subsequent messages to debug level. Also,
demote the "Disconnected message" to debug level unconditionally.
Link: https://lore.kernel.org/lkml/3277085.44csPzL39Z@natalenko.name/
Signed-off-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Mika writes:
thunderbolt: Fix for v6.8-rc4
This includes one USB4/Thunderbolt fix for v6.8-rc4:
- Correct the CNS (CM TBT3 Not Supported) bit setting for USB4
routers.
This has been in linux-next with no reported issues.
* tag 'thunderbolt-for-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Fix setting the CNS bit in ROUTER_CS_5
These functions are either used in only one file and can just be
made static or need an #include statement to avoid a warning:
arch/powerpc/platforms/85xx/mpc8536_ds.c:30:13: error: no previous prototype for 'mpc8536_ds_pic_init' [-Werror=missing-prototypes]
arch/powerpc/platforms/85xx/p1010rdb.c:27:13: error: no previous prototype for 'p1010_rdb_pic_init' [-Werror=missing-prototypes]
arch/powerpc/platforms/85xx/p1022_ds.c:373:6: error: no previous prototype for 'p1022ds_set_pixel_clock' [-Werror=missing-prototypes]
arch/powerpc/platforms/85xx/p1022_ds.c:422:1: error: no previous prototype for 'p1022ds_valid_monitor_port' [-Werror=missing-prototypes]
arch/powerpc/platforms/85xx/p1022_ds.c:435:13: error: no previous prototype for 'p1022_ds_pic_init' [-Werror=missing-prototypes]
arch/powerpc/platforms/85xx/p1022_rdk.c:43:6: error: no previous prototype for 'p1022rdk_set_pixel_clock' [-Werror=missing-prototypes]
arch/powerpc/platforms/85xx/p1022_rdk.c:92:1: error: no previous prototype for 'p1022rdk_valid_monitor_port' [-Werror=missing-prototypes]
arch/powerpc/platforms/85xx/p1022_rdk.c:99:13: error: no previous prototype for 'p1022_rdk_pic_init' [-Werror=missing-prototypes]
arch/powerpc/platforms/85xx/socrates_fpga_pic.c:273:13: error: no previous prototype for 'socrates_fpga_pic_init' [-Werror=missing-prototypes]
arch/powerpc/platforms/85xx/xes_mpc85xx.c:40:13: error: no previous prototype for 'xes_mpc85xx_pic_init' [-Werror=missing-prototypes]
arch/powerpc/platforms/85xx/mvme2500.c:24:13: error: no previous prototype for 'mvme2500_pic_init' [-Werror=missing-prototypes]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240123125148.2004648-2-arnd@kernel.org
ppc64_book3e_allmodconfig has one more driver that triggeres a
few missing-prototypes warnings:
arch/powerpc/sysdev/udbg_memcons.c:44:6: error: no previous prototype for 'memcons_putc' [-Werror=missing-prototypes]
arch/powerpc/sysdev/udbg_memcons.c:57:5: error: no previous prototype for 'memcons_getc_poll' [-Werror=missing-prototypes]
arch/powerpc/sysdev/udbg_memcons.c:80:5: error: no previous prototype for 'memcons_getc' [-Werror=missing-prototypes]
Mark all these function static as there are no other users.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240123125148.2004648-1-arnd@kernel.org
When the range parsing was open-coded the number of u32 entries to
parse had to be a multiple of 4 and the driver checks this. With
the range parsing converted to the range parser the counting changes
from individual u32 entries to a complete range, so the check must
not reject counts not divisible by 4.
Fixes: 2a88e4792c ("bus: imx-weim: Remove open coded "ranges" parsing")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This reverts commit ca10d851b9.
The commit allowed workqueue_apply_unbound_cpumask() to clear __WQ_ORDERED
on now removed implicitly ordered workqueues. This was incorrect in that
system-wide config change shouldn't break ordering properties of all
workqueues. The reason why apply_workqueue_attrs() path was allowed to do so
was because it was targeting the specific workqueue - either the workqueue
had WQ_SYSFS set or the workqueue user specifically tried to change
max_active, both of which indicate that the workqueue doesn't need to be
ordered.
The implicitly ordered workqueue promotion was removed by the previous
commit 3bc1e711c2 ("workqueue: Don't implicitly make UNBOUND workqueues w/
@max_active==1 ordered"). However, it didn't update this path and broke
build. Let's revert the commit which was incorrect in the first place which
also fixes build.
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 3bc1e711c2 ("workqueue: Don't implicitly make UNBOUND workqueues w/ @max_active==1 ordered")
Fixes: ca10d851b9 ("workqueue: Override implicit ordered attribute in workqueue_apply_unbound_cpumask()")
Cc: stable@vger.kernel.org # v6.6+
Signed-off-by: Tejun Heo <tj@kernel.org>
Commit 6abe9c1386 ("KVM: X86: Move ignore_msrs handling upper the
stack") changed the 'ignore_msrs' handling, including sanitizing return
values to the caller. This was fine until commit 12bc2132b1 ("KVM:
X86: Do the same ignore_msrs check for feature msrs") which allowed
non-existing feature MSRs to be ignored, i.e. to not generate an error
on the ioctl() level. It even tried to preserve the sanitization of the
return value. However, the logic is flawed, as '*data' will be
overwritten again with the uninitialized stack value of msr.data.
Fix this by simplifying the logic and always initializing msr.data,
vanishing the need for an additional error exit path.
Fixes: 12bc2132b1 ("KVM: X86: Do the same ignore_msrs check for feature msrs")
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20240203124522.592778-2-minipli@grsecurity.net
Signed-off-by: Sean Christopherson <seanjc@google.com>
The example for PCI devices has some addressing errors. 'reg' is written
as if the parent bus is PCI, but the default bus for examples is 1
address and size cell. 'ranges' is defining config space with a
size of 0. Generally, config space should not be defined in
'ranges', only PCI memory and I/O spaces. Fix these issues by updating
the values with made-up, but valid values.
This was uncovered with recent dtschema changes.
Link: https://lore.kernel.org/r/20240122173514.935742-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The check in nand_base.c, nand_scan_tail() : has the following code:
(ecc->steps * ecc->size != mtd->writesize) which fails for some NAND chips.
Remove ECC entries in this driver which are not integral multiplications,
and adjust the number of chunks for entries which fails the above
calculation so it will calculate correctly (this was previously done
automatically before the check and was removed in a later commit).
Fixes: 68c18dae68 ("mtd: rawnand: marvell: add missing layouts")
Cc: stable@vger.kernel.org
Signed-off-by: Elad Nachman <enachman@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
For DMA mode, the bus width of the DMA is equal to the size of data
word, so burst length should be configured as bits per word.
For CPU mode, because of the spi transfer len is in byte, so calculate
the total number of words according to spi transfer len and bits per
word, burst length should be configured as total data bits.
Signed-off-by: Carlos Song <carlos.song@nxp.com>
Reviewed-by: Clark Wang <xiaoning.wang@nxp.com>
Fixes: e9b220aeac ("spi: spi-imx: correctly configure burst length when using dma")
Fixes: 5f66db08cb ("spi: imx: Take in account bits per word instead of assuming 8-bits")
Link: https://lore.kernel.org/r/20240204091912.36488-1-carlos.song@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The tascodec_init() of the snd-soc-tas2781-comlib module is called from
snd-soc-tas2781-i2c and snd-hda-scodec-tas2781-i2c modules. It calls
request_firmware_nowait() with parameter THIS_MODULE and a cont/callback
from the latter modules.
The latter modules can be removed while their callbacks are running,
resulting in a general protection failure.
Add module parameter to tascodec_init() so request_firmware_nowait() can
be called with the module of the callback.
Fixes: ef3bcde75d ("ASoC: tas2781: Add tas2781 driver")
CC: stable@vger.kernel.org
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Link: https://lore.kernel.org/r/118dad922cef50525e5aab09badef2fa0eb796e5.1707076603.git.soyer@irl.hu
Signed-off-by: Mark Brown <broonie@kernel.org>
In kasan_init_region, when k_start is not page aligned, at the begin of
for loop, k_cur = k_start & PAGE_MASK is less than k_start, and then
`va = block + k_cur - k_start` is less than block, the addr va is invalid,
because the memory address space from va to block is not alloced by
memblock_alloc, which will not be reserved by memblock_reserve later, it
will be used by other places.
As a result, memory overwriting occurs.
for example:
int __init __weak kasan_init_region(void *start, size_t size)
{
[...]
/* if say block(dcd97000) k_start(feef7400) k_end(feeff3fe) */
block = memblock_alloc(k_end - k_start, PAGE_SIZE);
[...]
for (k_cur = k_start & PAGE_MASK; k_cur < k_end; k_cur += PAGE_SIZE) {
/* at the begin of for loop
* block(dcd97000) va(dcd96c00) k_cur(feef7000) k_start(feef7400)
* va(dcd96c00) is less than block(dcd97000), va is invalid
*/
void *va = block + k_cur - k_start;
[...]
}
[...]
}
Therefore, page alignment is performed on k_start before
memblock_alloc() to ensure the validity of the VA address.
Fixes: 663c0c9496 ("powerpc/kasan: Fix shadow area set up for modules.")
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1705974359-43790-1-git-send-email-xiaojiangfeng@huawei.com
MMU_FTR_USE_HIGH_BATS is set for G2_LE cores and derivatives like e300cX,
but the high BATs need to be enabled in HID2 to work. Add register
definitions and add the needed setup to __setup_cpu_603.
This fixes boot on CPUs like the MPC5200B with STRICT_KERNEL_RWX enabled
on systems where the flag has not been set by the bootloader already.
Fixes: e4d6654ebe ("powerpc/mm/32s: rework mmu_mapin_ram()")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240124103838.43675-1-matthias.schiffer@ew.tq-group.com
Calling get_system_loc_code before checking devfd and errno fails the test
when the device is not available, the expected behaviour is a SKIP.
Change the order of 'SKIP_IF_MSG' to correctly SKIP when the /dev/
papr-vpd device is not available.
Test output before:
Test FAILED on line 271
Test output after:
[SKIP] Test skipped on line 266: /dev/papr-vpd not present
Signed-off-by: R Nageswara Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240131130859.14968-1-rnsastry@linux.ibm.com
Nysal reported that userspace backtraces are missing in offcputime bcc
tool. As an example:
$ sudo ./bcc/tools/offcputime.py -uU
Tracing off-CPU time (us) of user threads by user stack... Hit Ctrl-C to end.
^C
write
- python (9107)
8
write
- sudo (9105)
9
mmap
- python (9107)
16
clock_nanosleep
- multipathd (697)
3001604
The offcputime bcc tool attaches a bpf program to a kprobe on
finish_task_switch(), which is usually hit on a syscall from userspace.
With the switch to system call vectored, we started setting
pt_regs->link to zero. This is because system call vectored behaves like
a function call with LR pointing to the system call return address, and
with no modification to SRR0/SRR1. The LR value does indicate our next
instruction, so it is being saved as pt_regs->nip, and pt_regs->link is
being set to zero. This is not a problem by itself, but BPF uses perf
callchain infrastructure for capturing stack traces, and that stores LR
as the second entry in the stack trace. perf has code to cope with the
second entry being zero, and skips over it. However, generic userspace
unwinders assume that a zero entry indicates end of the stack trace,
resulting in a truncated userspace stack trace.
Rather than fixing all userspace unwinders to ignore/skip past the
second entry, store the real LR value in pt_regs->link so that there
continues to be a valid, though duplicate entry in the stack trace.
With this change:
$ sudo ./bcc/tools/offcputime.py -uU
Tracing off-CPU time (us) of user threads by user stack... Hit Ctrl-C to end.
^C
write
write
[unknown]
[unknown]
[unknown]
[unknown]
[unknown]
PyObject_VectorcallMethod
[unknown]
[unknown]
PyObject_CallOneArg
PyFile_WriteObject
PyFile_WriteString
[unknown]
[unknown]
PyObject_Vectorcall
_PyEval_EvalFrameDefault
PyEval_EvalCode
[unknown]
[unknown]
[unknown]
_PyRun_SimpleFileObject
_PyRun_AnyFileObject
Py_RunMain
[unknown]
Py_BytesMain
[unknown]
__libc_start_main
- python (1293)
7
write
write
[unknown]
sudo_ev_loop_v1
sudo_ev_dispatch_v1
[unknown]
[unknown]
[unknown]
[unknown]
__libc_start_main
- sudo (1291)
7
syscall
syscall
bpf_open_perf_buffer_opts
[unknown]
[unknown]
[unknown]
[unknown]
_PyObject_MakeTpCall
PyObject_Vectorcall
_PyEval_EvalFrameDefault
PyEval_EvalCode
[unknown]
[unknown]
[unknown]
_PyRun_SimpleFileObject
_PyRun_AnyFileObject
Py_RunMain
[unknown]
Py_BytesMain
[unknown]
__libc_start_main
- python (1293)
11
clock_nanosleep
clock_nanosleep
nanosleep
sleep
[unknown]
[unknown]
__clone
- multipathd (698)
3001661
Fixes: 7fa95f9ada ("powerpc/64s: system call support for scv/rfscv instructions")
Cc: stable@vger.kernel.org
Reported-by: "Nysal Jan K.A" <nysal@linux.ibm.com>
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240202154316.395276-1-naveen@kernel.org
This reverts commit 095b96b2b8.
Marek reported the similar change in imx8mp-dhcom-pdk3.dts
caused a regression:
"This patch breaks USB-C port on this board.
If I plug in USB-C storage device, it is not detected. If I revert this
patch, it is detected.
Please drop this patch for now."
Revert it here as well.
Fixes: 095b96b2b8 ("arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
IOVDD is supplied by 1.8V, fix the referenced regulator.
Fixes: d8f9d81265 ("arm64: dts: imx8mp: Add analog audio output on i.MX8MP TQMa8MPxL/MBa8MPxL")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Make loading ib_srpt with this parameter set work. The current behavior is
that setting that parameter while loading the ib_srpt kernel module
triggers the following kernel crash:
BUG: kernel NULL pointer dereference, address: 0000000000000000
Call Trace:
<TASK>
parse_one+0x18c/0x1d0
parse_args+0xe1/0x230
load_module+0x8de/0xa60
init_module_from_file+0x8b/0xd0
idempotent_init_module+0x181/0x240
__x64_sys_finit_module+0x5a/0xb0
do_syscall_64+0x5f/0xe0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Cc: LiHonggang <honggangli@163.com>
Reported-by: LiHonggang <honggangli@163.com>
Fixes: a42d985bd5 ("ib_srpt: Initial SRP Target merge for v3.3-rc1")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240205004207.17031-1-bvanassche@acm.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Some PAPR system parameter values are formatted by firmware as
nul-terminated strings (e.g. LPAR name, shared processor attributes).
But the values returned for other parameters, such as processor module
info and TLB block invalidate characteristics, are binary data with
parameter-specific layouts. So char[] isn't the appropriate type for
the general case. Use u8/__u8.
Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com>
Fixes: 905b9e4878 ("powerpc/pseries/papr-sysparm: Expose character device to user space")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240202-papr-sysparm-ioblock-data-use-u8-v1-1-f5c6c89f65ec@linux.ibm.com
For ARCH=arm64, virt/lib/Kconfig is sourced twice,
from arch/arm64/kvm/Kconfig and from drivers/vfio/Kconfig.
There is no good reason to parse virt/lib/Kconfig twice.
Commit 2412405b31 ("KVM: arm/arm64: register irq bypass consumer
on ARM/ARM64") should not have added this 'source' directive.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240204074305.31492-1-masahiroy@kernel.org
UART4 is used as CM7 coprocessor debug UART and may not be accessible from
Linux in case it is protected by RDC. The RDC protection is set up by the
platform firmware. UART4 is not used on this platform by Linux. Disable
UART4 by default to prevent boot hangs, which occur when the RDC protection
is in place.
Fixes: 562d222f23 ("arm64: dts: imx8mp: Add support for Data Modul i.MX8M Plus eDM SBC")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Use a u64 instead of a u8 when taking a snapshot of pmu->fixed_ctr_ctrl
when reprogramming fixed counters, as truncating the value results in KVM
thinking fixed counter 2 is already disabled (the bug also affects fixed
counters 3+, but KVM doesn't yet support those). As a result, if the
guest disables fixed counter 2, KVM will get a false negative and fail to
reprogram/disable emulation of the counter, which can leads to incorrect
counts and spurious PMIs in the guest.
Fixes: 76d287b234 ("KVM: x86/pmu: Drop "u8 ctrl, int idx" for reprogram_fixed_counter()")
Cc: stable@vger.kernel.org
Signed-off-by: Mingwei Zhang <mizhang@google.com>
Link: https://lore.kernel.org/r/20240123221220.3911317-1-mizhang@google.com
[sean: rewrite changelog to call out the effects of the bug]
Signed-off-by: Sean Christopherson <seanjc@google.com>
The links in a cycle are not all logged in a consistent manner or not
logged at all. Make them consistent by adding a "cycle:" string and log all
the link in the cycles (even the child ==> parent dependency) so that it's
easier to debug cycle detection code. Also, mark the start and end of a
cycle so it's easy to tell when multiple cycles are logged back to back.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240202095636.868578-4-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fw_devlink can detect most overlapping/intersecting cycles. However it was
missing a few corner cases because of an incorrect optimization logic that
tries to avoid repeating cycle detection for devices that are already
marked as part of a cycle.
Here's an example provided by Xu Yang (edited for clarity):
usb
+-----+
tcpc | |
+-----+ | +--|
| |----------->|EP|
|--+ | | +--|
|EP|<-----------| |
|--+ | | B |
| | +-----+
| A | |
+-----+ |
^ +-----+ |
| | | |
+-----| C |<--+
| |
+-----+
usb-phy
Node A (tcpc) will be populated as device 1-0050.
Node B (usb) will be populated as device 38100000.usb.
Node C (usb-phy) will be populated as device 381f0040.usb-phy.
The description below uses the notation:
consumer --> supplier
child ==> parent
1. Node C is populated as device C. No cycles detected because cycle
detection is only run when a fwnode link is converted to a device link.
2. Node B is populated as device B. As we convert B --> C into a device
link we run cycle detection and find and mark the device link/fwnode
link cycle:
C--> A --> B.EP ==> B --> C
3. Node A is populated as device A. As we convert C --> A into a device
link, we see it's already part of a cycle (from step 2) and don't run
cycle detection. Thus we miss detecting the cycle:
A --> B.EP ==> B --> A.EP ==> A
Looking at it another way, A depends on B in one way:
A --> B.EP ==> B
But B depends on A in two ways and we only detect the first:
B --> C --> A
B --> A.EP ==> A
To detect both of these, we remove the incorrect optimization attempt in
step 3 and run cycle detection even if the fwnode link from which the
device link is being created has already been marked as part of a cycle.
Reported-by: Xu Yang <xu.yang_2@nxp.com>
Closes: https://lore.kernel.org/lkml/DU2PR04MB8822693748725F85DC0CB86C8C792@DU2PR04MB8822.eurprd04.prod.outlook.com/
Fixes: 3fb16866b5 ("driver core: fw_devlink: Make cycle detection more robust")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240202095636.868578-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
device_link_flag_is_sync_state_only() correctly returns true on the flags
of an existing device link that only implements sync_state() functionality.
However, it incorrectly and confusingly returns false if it's called with
DL_FLAG_SYNC_STATE_ONLY.
This bug doesn't manifest in any of the existing calls to this function,
but fix this confusing behavior to avoid future bugs.
Fixes: 67cad5c670 ("driver core: fw_devlink: Add DL_FLAG_CYCLE support to device links")
Signed-off-by: Saravana Kannan <saravanak@google.com>
Tested-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240202095636.868578-2-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CAP_NET_ADMIN allows to configure network interfaces, not CAP_SYS_ADMIN
which only allows to call unshare(2). Without this change, running
network tests as a non-root user but with all capabilities would fail at
the setup_loopback() step with "RTNETLINK answers: Operation not
permitted".
The issue is only visible when running tests with non-root users (i.e.
only relying on ambient capabilities). Indeed, when configuring the
network interface, the "ip" command is called, which may lead to the
special handling of capabilities for the root user by execve(2). If
root is the caller, then the inherited, permitted and effective
capabilities are all reset, which then includes CAP_NET_ADMIN. However,
if a non-root user is the caller, then ambient capabilities are masked
by the inherited ones, which were explicitly dropped.
To make execution deterministic whatever users are running the tests,
set the noroot secure bit for each test, and set the inheritable and
ambient capabilities to CAP_NET_ADMIN, the only capability that may be
required after an execve(2).
Factor out _effective_cap() into _change_cap(), and use it to manage
ambient capabilities with the new set_ambient_cap() and
clear_ambient_cap() helpers.
This makes it possible to run all Landlock tests with check-linux.sh
from https://github.com/landlock-lsm/landlock-test-tools
Cc: Konstantin Meskhidze <konstantin.meskhidze@huawei.com>
Fixes: a549d055a2 ("selftests/landlock: Add network tests")
Link: https://lore.kernel.org/r/20240125153230.3817165-2-mic@digikod.net
[mic: Make sure SECBIT_NOROOT_LOCKED is set]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
This reverts commit abe2023b4c.
Changing the locking order means that scheduler/msm_job_run() can race
with the recovery kthread worker, with the result that the GPU gets an
extra runpm get when we are trying to power it off. Leaving the GPU in
an unrecovered state.
I'll need to come up with a different scheme for appeasing lockdep.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/573835/
During the testing of Gnome on Qualcomm Robotics platform screen
corruption has been observed. Lowering GPU's highest_bank_bit from 14 to
13 seems to fix the screen corruption.
Note, the MDSS and DPU drivers use HBB=1 (which maps to the
highest_bank_bit = 14). So this change merely works around the UBWC
swizzling issue on this platform until the real cause is found.
Fixes: e7fc9398e6 ("drm/msm/a6xx: Add A610 support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/573838/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Since commit 79e2cf2e7a ("drm/gem: Take reservation lock for vmap/vunmap
operations"), the resv lock is already held in the prime vmap path, so
don't try to grab it again.
v2: This applies to vunmap path as well
v3: Fix fixes commit
Fixes: 79e2cf2e7a ("drm/gem: Take reservation lock for vmap/vunmap operations")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Christian König <christian.koenig@amd.com>
Patchwork: https://patchwork.freedesktop.org/patch/576642/
gtod_is_based_on_tsc() is boolean in nature, i.e. it returns '1' for good
clocksources and '0' otherwise. Moreover, its result is used raw by
kvm_get_time_and_clockread()/kvm_get_walltime_and_clockread() which are
'bool'.
No functional change intended.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-6-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM sets up Hyper-V TSC page clocksource for its guests when system
clocksource is 'based on TSC' (see gtod_is_based_on_tsc()), running
hyperv_clock with any other clocksource leads to imminent failure.
Add the missing requirement to make the test skip gracefully.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-5-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM's 'gtod_is_based_on_tsc()' recognizes two clocksources: 'tsc' and
'hyperv_clocksource_tsc_page' and enables kvmclock in 'masterclock'
mode when either is in use. Transform 'sys_clocksource_is_tsc()' into
'sys_clocksource_is_based_on_tsc()' to support the later. This affects
two tests: kvm_clock_test and vmx_nested_tsc_scaling_test, both seem
to work well when system clocksource is 'hyperv_clocksource_tsc_page'.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-4-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Several existing x86 selftests need to check that the underlying system
clocksource is TSC or based on TSC but every test implements its own
check. As a first step towards unification, extract check_clocksource()
from kvm_clock_test and split it into two functions: arch-neutral
'sys_get_cur_clocksource()' and x86-specific 'sys_clocksource_is_tsc()'.
Fix a couple of pre-existing issues in kvm_clock_test: memory leakage in
check_clocksource() and using TEST_ASSERT() instead of TEST_REQUIRE().
The change also makes the test fail when system clocksource can't be read
from sysfs.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240109141121.1619463-2-vkuznets@redhat.com
[sean: eliminate if-elif pattern just to set a bool true]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Since commit 363d0e5628 ("media: pwm-ir-tx: Trigger edges from
hrtimer interrupt context"), pwm-ir-tx uses high resolution timers
for IR signal generation when the pwm can be used from atomic context.
Ensure they are available.
Fixes: 363d0e5628 ("media: pwm-ir-tx: Trigger edges from hrtimer interrupt context")
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
When irtoy_command fails, buf should be freed since it is allocated by
irtoy_tx, or there is a memleak.
Fixes: 4114978dcd ("media: ir_toy: prevent device from hanging during transmit")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The atomisp driver emulates a standard v4l2 device, which also works
for non media-controller aware applications.
Part of this requires making try_fmt calls on the sensor when
a normal v4l2 app is making try_fmt calls on the /dev/video# mode.
With the recent v4l2_subdev_state handling changes in 6.8 this no longer
works, fixing this requires 2 changes:
1. The atomisp code was using its own internal v4l2_subdev_pad_config
for this. Replace the internal v4l2_subdev_pad_config with allocating
a full v4l2_subdev_state for storing the full try_fmt state.
2. The paths actually setting the fmt or crop selection now need to be
passed the v4l2_subdev's active state, so that sensor drivers which
are using the v4l2_subdev's active state to store their state keep
working.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The driver requests the interrupts as IRQF_SHARED, so the interrupt
handlers can be called at any time. If such a call happens while the ISP
is powered down, the SoC will hang as the driver tries to access the
ISP registers.
This can be reproduced even without the platform sharing the IRQ line:
Enable CONFIG_DEBUG_SHIRQ and unload the driver, and the board will
hang.
Fix this by adding a new field, 'irqs_enabled', which is used to bail
out from the interrupt handler when the ISP is not operational.
Link: https://lore.kernel.org/r/20231218-rkisp-shirq-fix-v1-2-173007628248@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
kvm_vcpu_ioctl_x86_set_vcpu_events() routine makes 'KVM_REQ_NMI'
request for a vcpu even when its 'events->nmi.pending' is zero.
Ex:
qemu_thread_start
kvm_vcpu_thread_fn
qemu_wait_io_event
qemu_wait_io_event_common
process_queued_cpu_work
do_kvm_cpu_synchronize_post_init/_reset
kvm_arch_put_registers
kvm_put_vcpu_events (cpu, level=[2|3])
This leads vCPU threads in QEMU to constantly acquire & release the
global mutex lock, delaying the guest boot due to lock contention.
Add check to make KVM_REQ_NMI request only if vcpu has NMI pending.
Fixes: bdedff2631 ("KVM: x86: Route pending NMIs from userspace through process_nmi()")
Cc: stable@vger.kernel.org
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Link: https://lore.kernel.org/r/20240103075343.549293-1-ppandit@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The constraints for 'audio-ports' don't match the description. There can
be 1 or 2 DAI entries and each entry is exactly 2 values. Also, the
values' sizes are 32-bits, not 8-bits. Move the size constraints to the
outer dimension (number of DAIs) and add constraints on inner array
values.
Link: https://lore.kernel.org/r/20240122204959.1665970-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Relax DEVX access upon modify commands to be UVERBS_ACCESS_READ.
The kernel doesn't need to protect what firmware protects, or what
causes no damage to anyone but the user.
As firmware needs to protect itself from parallel access to the same
object, don't block parallel modify/query commands on the same object in
the kernel side.
This change will allow user space application to run parallel updates to
different entries in the same bulk object.
Tested-by: Tamar Mashiah <tmashiah@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Link: https://lore.kernel.org/r/7407d5ed35dc427c1097699e12b49c01e1073406.1706433934.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
debugfs entries for RRoCE general CC parameters must be exposed only when
they are supported, otherwise when accessing them there may be a syndrome
error in kernel log, for example:
$ cat /sys/kernel/debug/mlx5/0000:08:00.1/cc_params/rtt_resp_dscp
cat: '/sys/kernel/debug/mlx5/0000:08:00.1/cc_params/rtt_resp_dscp': Invalid argument
$ dmesg
mlx5_core 0000:08:00.1: mlx5_cmd_out_err:805:(pid 1253): QUERY_CONG_PARAMS(0x824) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x325a82), err(-22)
Fixes: 66fb1d5df6 ("IB/mlx5: Extend debug control for CC parameters")
Reviewed-by: Edward Srouji <edwards@nvidia.com>
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/e7ade70bad52b7468bdb1de4d41d5fad70c8b71c.1706433934.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The rule inside kvm enforces that the vcpu->mutex is taken *inside*
kvm->lock. The rule is violated by the pkvm_create_hyp_vm() which acquires
the kvm->lock while already holding the vcpu->mutex lock from
kvm_vcpu_ioctl(). Avoid the circular locking dependency altogether by
protecting the hyp vm handle with the config_lock, much like we already
do for other forms of VM-scoped data.
Signed-off-by: Sebastian Ene <sebastianene@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240124091027.1477174-2-sebastianene@google.com
open_path_or_exit() is used for '/dev/kvm', '/dev/sev', and
'/sys/module/%s/parameters/%s' and skipping test when the entry is missing
is completely reasonable. Other errors, however, may indicate a real issue
which is easy to miss. E.g. when 'hyperv_features' test was entering an
infinite loop the output was:
./hyperv_features
Testing access to Hyper-V specific MSRs
1..0 # SKIP - /dev/kvm not available (errno: 24)
and this can easily get overlooked.
Keep ENOENT case 'special' for skipping tests and fail when open() results
in any other errno.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240129085847.2674082-2-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When X86_FEATURE_INVTSC is missing, guest_test_msrs_access() was supposed
to skip testing dependent Hyper-V invariant TSC feature. Unfortunately,
'continue' does not lead to that as stage is not incremented. Moreover,
'vm' allocated with vm_create_with_one_vcpu() is not freed and the test
runs out of available file descriptors very quickly.
Fixes: bd827bd775 ("KVM: selftests: Test Hyper-V invariant TSC control")
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20240129085847.2674082-1-vkuznets@redhat.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Delete the AMX's tests "stage" counter, as the counter is no longer used,
which makes clang unhappy:
x86_64/amx_test.c:224:6: error: variable 'stage' set but not used
int stage, ret;
^
1 error generated.
Note, "stage" was never really used, it just happened to be dumped out by
a (failed) assertion on run->exit_reason, i.e. the AMX test has no concept
of stages, the code was likely copy+pasted from a different test.
Fixes: c96f57b080 ("KVM: selftests: Make vCPU exit reason test assertion common")
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20240109220302.399296-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Pull Samsung clk fixes from Krzysztof Kozlowski:
Google GS101: Correct the input clock names to CMU MISC clock controller
to match received review. The review was initially missed and CMU MISC
clock controller bindings, driver and DTS was merged into v6.8-rc1 with
different names. Nothing was released so far, so the bindings and
driver can be still corrected to match review.
* tag 'samsung-clk-fixes-6.8' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
clk: samsung: clk-gs101: comply with the new dt cmu_misc clock names
dt-bindings: clock: gs101: rename cmu_misc clock-names
The PCI AER model is an awkward fit for CXL error handling. While the
expectation is that a PCI device can escalate to link reset to recover
from an AER event, the same reset on CXL amounts to a surprise memory
hotplug of massive amounts of memory.
At present, the CXL error handler attempts some optimistic error
handling to unbind the device from the cxl_mem driver after reaping some
RAS register values. This results in a "hopeful" attempt to unplug the
memory, but there is no guarantee that will succeed.
A subsequent AER notification after the memdev unbind event can no
longer assume the registers are mapped. Check for memdev bind before
reaping status register values to avoid crashes of the form:
BUG: unable to handle page fault for address: ffa00000195e9100
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
[...]
RIP: 0010:__cxl_handle_ras+0x30/0x110 [cxl_core]
[...]
Call Trace:
<TASK>
? __die+0x24/0x70
? page_fault_oops+0x82/0x160
? kernelmode_fixup_or_oops+0x84/0x110
? exc_page_fault+0x113/0x170
? asm_exc_page_fault+0x26/0x30
? __pfx_dpc_reset_link+0x10/0x10
? __cxl_handle_ras+0x30/0x110 [cxl_core]
? find_cxl_port+0x59/0x80 [cxl_core]
cxl_handle_rp_ras+0xbc/0xd0 [cxl_core]
cxl_error_detected+0x6c/0xf0 [cxl_core]
report_error_detected+0xc7/0x1c0
pci_walk_bus+0x73/0x90
pcie_do_recovery+0x23f/0x330
Longer term, the unbind and PCI_ERS_RESULT_DISCONNECT behavior might
need to be replaced with a new PCI_ERS_RESULT_PANIC.
Fixes: 6ac07883db ("cxl/pci: Add RCH downstream port error logging")
Cc: stable@vger.kernel.org
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Li Ming <ming4.li@intel.com>
Link: https://lore.kernel.org/r/20240129131856.2458980-1-ming4.li@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
response_msg is a pointer to an unsigned int (u32). So passing just
response_msg to sizeof would not print the size of the variable. To get
the size of response_msg we need to pass it as a pointer variable.
Fixes: ec5b0f1193 ("firmware: microchip: add PolarFire SoC Auto Update support")
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Rework the NX hugepage test's skip message regarding the magic token to
provide all of the necessary magic, and to very explicitly recommended
using the wrapper shell script.
Opportunistically remove an overzealous newline; splitting the
recommendation message across two lines of ~45 characters makes it much
harder to read than running out a single line to 98 characters.
Link: https://lore.kernel.org/r/20231129224042.530798-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The bit 23, CM TBT3 Not Supported (CNS), in ROUTER_CS_5 indicates
whether a USB4 Connection Manager is TBT3-Compatible and should be:
0b for TBT3-Compatible
1b for Not TBT3-Compatible
Fixes: b04079837b ("thunderbolt: Add initial support for USB4")
Cc: stable@vger.kernel.org
Signed-off-by: Mohammad Rahimi <rahimi.mhmmd@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Commit 4c3577db3e ("Staging: iio: impedance-analyzer: Fix sparse
warning") fixed a compiler warning, but introduced a bug that resulted
in one of the two 16 bit IIO channels always being zero (when both are
enabled).
This is because int is 32 bits wide on most architectures and in the
case of a little-endian machine the two most significant bytes would
occupy the buffer for the second channel as 'val' is being passed as a
void pointer to 'iio_push_to_buffers()'.
Fix by defining 'val' as u16. Tested working on ARM64.
Fixes: 4c3577db3e ("Staging: iio: impedance-analyzer: Fix sparse warning")
Signed-off-by: David Schiller <david.schiller@jku.at>
Link: https://lore.kernel.org/r/20240122134916.2137957-1-david.schiller@jku.at
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
One issue comes up while building selftest/landlock/fs_test on my side
(gcc 7.3/glibc-2.28/kernel-4.19).
gcc -Wall -O2 -isystem fs_test.c -lcap -o selftests/landlock/fs_test
fs_test.c:4575:9: error: initializer element is not constant
.mnt = mnt_tmp,
^~~~~~~
Signed-off-by: Hu Yadi <hu.yadi@h3c.com>
Suggested-by: Jiao <jiaoxupo@h3c.com>
Reviewed-by: Berlin <berlin@h3c.com>
Link: https://lore.kernel.org/r/20240124022908.42100-1-hu.yadi@h3c.com
Fixes: 04f9070e99 ("selftests/landlock: Add tests for pseudo filesystems")
[mic: Factor out mount's data string and make mnt_tmp static]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
One issue comes up while building selftest/landlock/net_test on my side
(gcc 7.3/glibc-2.28/kernel-4.19).
net_test.c: In function ‘set_service’:
net_test.c:91:45: warning: implicit declaration of function ‘gettid’; [-Wimplicit-function-declaration]
"_selftests-landlock-net-tid%d-index%d", gettid(),
^~~~~~
getgid
net_test.c:(.text+0x4e0): undefined reference to `gettid'
Signed-off-by: Hu Yadi <hu.yadi@h3c.com>
Suggested-by: Jiao <jiaoxupo@h3c.com>
Reviewed-by: Berlin <berlin@h3c.com>
Fixes: a549d055a2 ("selftests/landlock: Add network tests")
Link: https://lore.kernel.org/r/20240123062621.25082-1-hu.yadi@h3c.com
[mic: Cosmetic fixes]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Something when wrong when applying the original patch and only the
c file made it in. Here the rest of the changes are applied.
Fixes: c9180b8e39 ("iio: humidity: Add driver for ti HDC302x humidity sensors")
Reported-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Cc: Li peiyu <579lpy@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
There are a ton of build errors when REGMAP is not set, so select
REGMAP to fix all of them.
Examples (not all of them):
../drivers/iio/imu/bno055/bno055_ser_core.c:495:15: error: variable 'bno055_ser_regmap_bus' has initializer but incomplete type
495 | static struct regmap_bus bno055_ser_regmap_bus = {
../drivers/iio/imu/bno055/bno055_ser_core.c:496:10: error: 'struct regmap_bus' has no member named 'write'
496 | .write = bno055_ser_write_reg,
../drivers/iio/imu/bno055/bno055_ser_core.c:497:10: error: 'struct regmap_bus' has no member named 'read'
497 | .read = bno055_ser_read_reg,
../drivers/iio/imu/bno055/bno055_ser_core.c: In function 'bno055_ser_probe':
../drivers/iio/imu/bno055/bno055_ser_core.c:532:18: error: implicit declaration of function 'devm_regmap_init'; did you mean 'vmem_map_init'? [-Werror=implicit-function-declaration]
532 | regmap = devm_regmap_init(&serdev->dev, &bno055_ser_regmap_bus,
../drivers/iio/imu/bno055/bno055_ser_core.c:532:16: warning: assignment to 'struct regmap *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
532 | regmap = devm_regmap_init(&serdev->dev, &bno055_ser_regmap_bus,
../drivers/iio/imu/bno055/bno055_ser_core.c: At top level:
../drivers/iio/imu/bno055/bno055_ser_core.c:495:26: error: storage size of 'bno055_ser_regmap_bus' isn't known
495 | static struct regmap_bus bno055_ser_regmap_bus = {
Fixes: 2eef5a9cc6 ("iio: imu: add BNO055 serdev driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andrea Merello <andrea.merello@iit.it>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-iio@vger.kernel.org
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240110185611.19723-1-rdunlap@infradead.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
"bmp085" is missing in bmp280_spi_id[] table, which leads to the next
warning in dmesg:
SPI driver bmp280 has no spi_device_id for bosch,bmp085
Add "bmp085" to bmp280_spi_id[] by mimicking its existing description in
bmp280_of_spi_match[] table to fix the above warning.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Fixes: b26b4e9170 ("iio: pressure: bmp280: add SPI interface driver")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The symbol's prompt should be a one-line description, instead of just
duplicating the symbol name.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
When walking directory trees, instead of looking for specific files and
running dirname to get the parent folder, traverse all folders and
ignore the ones not containing the desired files. This avoids the need
to call dirname inside the loop, which drastically decreases run time:
Running locally on a mt8192-asurada-spherion, which reports 160 test
cases, has gone from 5.5s to 2.9s, while running remotely with an
nfsroot has gone from 13.5s to 5.5s.
This change has a side-effect, which is that the root DT node now
also shows in the output, even though it isn't expected to bind to a
driver. However there shouldn't be a matching driver for the board
compatible, so the end result will be just an extra skipped test:
ok 1 / # SKIP
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/310391e8-fdf2-4c2f-a680-7744eb685177@sirena.org.uk
Fixes: 14571ab1ad ("kselftest: Add new test for detecting unprobed Devicetree devices")
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20240122-dt-kselftest-dirname-perf-fix-v2-1-f1630532fd38@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
Commit 23e7b1bfed ("xfrm: Don't accidentally set RTO_ONLINK in
decode_session4()") fixed a problem where decode_session4() could
erroneously set the RTO_ONLINK flag for IPv4 route lookups. This
problem was reintroduced when decode_session4() was modified to
use the flow dissector.
Fix this by clearing again the two low order bits of ->flowi4_tos.
Found by code inspection, compile tested only.
Fixes: 7a0207094f ("xfrm: policy: replace session decode with flow dissector")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
