Pull MIPS fixes from Thomas Bogendoerfer:
- fix jump label branch range check
- check kmalloc failures in Loongson64 kexec
- fix builds with clang-14
- fix char/int handling in pic32
* tag 'mips-fixes_6.1_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: pic32: treat port as signed integer
MIPS: jump_label: Fix compat branch range check
mips: alchemy: gpio: Include the right header
MIPS: Loongson64: Add WARN_ON on kexec related kmalloc failed
MIPS: fix duplicate definitions for exported symbols
mips: boot/compressed: use __NO_FORTIFY
Pull EFI fixes from Ard Biesheuvel:
- Force the use of SetVirtualAddressMap() on Ampera Altra arm64
machines, which crash in SetTime() if no virtual remapping is used
This is the first time we've added an SMBIOS based quirk on arm64,
but fortunately, we can just call a EFI protocol to grab the type #1
SMBIOS record when running in the stub, so we don't need all the
machinery we have in the kernel proper to parse SMBIOS data.
- Drop a spurious warning on misaligned runtime regions when using 16k
or 64k pages on arm64
* tag 'efi-fixes-for-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
arm64: efi: Fix handling of misaligned runtime regions and drop warning
arm64: efi: Force the use of SetVirtualAddressMap() on Altra machines
Pull SCSI fixes from James Bottomley:
"Three small fixes, all in drivers.
The sas one is in an unlikely error leg, the debug one is to make it
more standards conformant and the ibmvfc one is to fix a user visible
bug where a failover could lose all paths to the device"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_debug: Make the READ CAPACITY response compliant with ZBC
scsi: scsi_transport_sas: Fix error handling in sas_phy_add()
scsi: ibmvfc: Avoid path failures during live migration
Pull additional sound fix from Takashi Iwai:
"A regression fix for the latest memalloc helper change"
* tag 'sound-fix-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: memalloc: Try dma_alloc_noncontiguous() at first
The latest fix for the non-contiguous memalloc helper changed the
allocation method for a non-IOMMU system to use only the fallback
allocator. This should have worked, but it caused a problem sometimes
when too many non-contiguous pages are allocated that can't be treated
by HD-audio controller.
As a quirk workaround, go back to the original strategy: use
dma_alloc_noncontiguous() at first, and apply the fallback only when
it fails, but only for non-IOMMU case.
We'll need a better fix in the fallback code as well, but this
workaround should paper over most cases.
Fixes: 9736a32513 ("ALSA: memalloc: Don't fall back for SG-buffer with IOMMU")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/CAHk-=wgSH5ubdvt76gNwa004ooZAEJL_1Q-Fyw5M2FDdqL==dg@mail.gmail.com
Link: https://lore.kernel.org/r/20221112084718.3305-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull ata fixes from Damien Le Moal:
"Several libata generic code fixes for rc5:
- Add missing translation of the SYNCHRONIZE CACHE 16 scsi command as
this command is mandatory for host-managed ZBC drives.
The lack of support for it in libata-scsi was causing issues with
some passthrough applications using ZBC drives (from Shin'ichiro).
- Fix the error path of libata-transport host, port, link and device
attributes initialization (from Yingliang).
- Prevent issuing new commands to a drive that is in the NCQ error
state and undergoing recovery (From Niklas).
This bug went unnoticed for a long time as commands issued to a
drive in error state are aborted immediately and retried by the
scsi layer, hiding the useless abort-and-retry sequence"
* tag 'ata-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-core: do not issue non-internal commands once EH is pending
ata: libata-transport: fix error handling in ata_tdev_add()
ata: libata-transport: fix error handling in ata_tlink_add()
ata: libata-transport: fix error handling in ata_tport_add()
ata: libata-transport: fix double ata_host_put() in ata_tport_add()
ata: libata-scsi: fix SYNCHRONIZE CACHE (16) command failure
Pull misc hotfixes from Andrew Morton:
"22 hotfixes.
Eight are cc:stable and the remainder address issues which were
introduced post-6.0 or which aren't considered serious enough to
justify a -stable backport"
* tag 'mm-hotfixes-stable-2022-11-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
docs: kmsan: fix formatting of "Example report"
mm/damon/dbgfs: check if rm_contexts input is for a real context
maple_tree: don't set a new maximum on the node when not reusing nodes
maple_tree: fix depth tracking in maple_state
arch/x86/mm/hugetlbpage.c: pud_huge() returns 0 when using 2-level paging
fs: fix leaked psi pressure state
nilfs2: fix use-after-free bug of ns_writer on remount
x86/traps: avoid KMSAN bugs originating from handle_bug()
kmsan: make sure PREEMPT_RT is off
Kconfig.debug: ensure early check for KMSAN in CONFIG_KMSAN_WARN
x86/uaccess: instrument copy_from_user_nmi()
kmsan: core: kmsan_in_runtime() should return true in NMI context
mm: hugetlb_vmemmap: include missing linux/moduleparam.h
mm/shmem: use page_mapping() to detect page cache for uffd continue
mm/memremap.c: map FS_DAX device memory as decrypted
Partly revert "mm/thp: carry over dirty bit when thp splits on pmd"
nilfs2: fix deadlock in nilfs_count_free_blocks()
mm/mmap: fix memory leak in mmap_region()
hugetlbfs: don't delete error page from pagecache
maple_tree: reorganize testing to restore module testing
...
Pull arm64 fixes from Catalin Marinas:
- Another fix for rodata=full. Since rodata= is not a simple boolean on
arm64 (accepting 'full' as well), it got inadvertently broken by
changes in the core code. If rodata=on is the default and rodata=off
is passed on the kernel command line, rodata_full is never disabled
- Fix gcc compiler warning of shifting 0xc0 into bits 31:24 without an
explicit conversion to u32 (triggered by the AMPERE1 MIDR definition)
- Include asm/ptrace.h in asm/syscall_wrapper.h to fix an incomplete
struct pt_regs type causing the BPF verifier to refuse to load a
tracing program which accesses pt_regs
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/syscall: Include asm/ptrace.h in syscall_wrapper header.
arm64: Fix bit-shifting UB in the MIDR_CPU_MODEL() macro
arm64: fix rodata=full again
While the ATA specification states that a device should return command
aborted for all commands queued after the device has entered error state,
since ATA only keeps the sense data for the latest command (in non-NCQ
case), we really don't want to send block layer commands to the device
after it has entered error state. (Only ATA EH commands should be sent,
to read the sense data etc.)
Currently, scsi_queue_rq() will check if scsi_host_in_recovery()
(state is SHOST_RECOVERY), and if so, it will _not_ issue a command via:
scsi_dispatch_cmd() -> host->hostt->queuecommand() (ata_scsi_queuecmd())
-> __ata_scsi_queuecmd() -> ata_scsi_translate() -> ata_qc_issue()
Before commit e494f6a728 ("[SCSI] improved eh timeout handler"),
when receiving a TFES error IRQ, the call chain looked like this:
ahci_error_intr() -> ata_port_abort() -> ata_do_link_abort() ->
ata_qc_complete() -> ata_qc_schedule_eh() -> blk_abort_request() ->
blk_rq_timed_out() -> q->rq_timed_out_fn() (scsi_times_out()) ->
scsi_eh_scmd_add() -> scsi_host_set_state(shost, SHOST_RECOVERY)
Which meant that as soon as an error IRQ was serviced, SHOST_RECOVERY
would be set.
However, after commit e494f6a728 ("[SCSI] improved eh timeout handler"),
scsi_times_out() will instead call scsi_abort_command() which will queue
delayed work, and the worker function scmd_eh_abort_handler() will call
scsi_eh_scmd_add(), which calls scsi_host_set_state(shost, SHOST_RECOVERY).
So now, after the TFES error IRQ has been serviced, we need to wait for
the SCSI workqueue to run its work before SHOST_RECOVERY gets set.
It is worth noting that, even before commit e494f6a728 ("[SCSI] improved
eh timeout handler"), we could receive an error IRQ from the time when
scsi_queue_rq() checks scsi_host_in_recovery(), to the time when
ata_scsi_queuecmd() is actually called.
In order to handle both the delayed setting of SHOST_RECOVERY and the
window where we can receive an error IRQ, add a check against
ATA_PFLAG_EH_PENDING (which gets set when servicing the error IRQ),
inside ata_scsi_queuecmd() itself, while holding the ap->lock.
(Since the ap->lock is held while servicing IRQs.)
Fixes: e494f6a728 ("[SCSI] improved eh timeout handler")
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Tested-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- Quiet user passthrough command errors (Keith Busch)
- Fix memory leak in nvmet_subsys_attr_model_store_locked
- Fix a memory leak in nvmet-auth (Sagi Grimberg)
- Fix a potential NULL point deref in bfq (Yu)
- Allocate command/response buffers separately for DMA for sed-opal,
rather than rely on embedded alignment (Serge)
* tag 'block-6.1-2022-11-11' of git://git.kernel.dk/linux:
nvmet: fix a memory leak
nvmet: fix memory leak in nvmet_subsys_attr_model_store_locked
nvme: quiet user passthrough command errors
block: sed-opal: kmalloc the cmd/resp buffers
block, bfq: fix null pointer dereference in bfq_bio_bfqg()
Pull io_uring fixes from Jens Axboe:
"Nothing major, just a few minor tweaks:
- Tweak for the TCP zero-copy io_uring self test (Pavel)
- Rather than use our internal cached value of number of CQ events
available, use what the user can see (Dylan)
- Fix a typo in a comment, added in this release (me)
- Don't allow wrapping while adding provided buffers (me)
- Fix a double poll race, and add a lockdep assertion for it too
(Pavel)"
* tag 'io_uring-6.1-2022-11-11' of git://git.kernel.dk/linux:
io_uring/poll: lockdep annote io_poll_req_insert_locked
io_uring/poll: fix double poll req->flags races
io_uring: check for rollover of buffer ID when providing buffers
io_uring: calculate CQEs from the user visible value
io_uring: fix typo in io_uring.h comment
selftests/net: don't tests batched TCP io_uring zc
Pull s390 fixes from Alexander Gordeev:
- fix memcpy warning about field-spanning write in zcrypt driver
- minor updates to defconfigs
- remove CONFIG_DEBUG_INFO_BTF from all defconfigs and add btf.config
addon config file. It significantly decreases compile time and allows
quickly enabling that option into the current kernel config
- add kasan.config addon config file which allows to easily enable
KASAN into the current kernel config
- binutils commit 906f69cf65da ("IBM zSystems: Issue error for *DBL
relocs on misaligned symbols") caused several link errors. Always
build relocatable kernel to avoid this problem
- raise the minimum clang version to 15.0.0 to avoid silent generation
of a corrupted code
* tag 's390-6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
scripts/min-tool-version.sh: raise minimum clang version to 15.0.0 for s390
s390: always build relocatable kernel
s390/configs: add kasan.config addon config file
s390/configs: move CONFIG_DEBUG_INFO_BTF into btf.config addon config
s390: update defconfigs
s390/zcrypt: fix warning about field-spanning write
Pull nfsd fixes from Chuck Lever:
- Fix an export leak
- Fix a potential tracepoint crash
* tag 'nfsd-6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: put the export reference in nfsd4_verify_deleg_dentry
nfsd: fix use-after-free in nfsd_file_do_acquire tracepoint
Pull UDF fix from Jan Kara:
"Fix a possible memory corruption with UDF"
* tag 'fixes_for_v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Fix a slab-out-of-bounds write bug in udf_find_entry()
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix 'perf stat' crash with --per-node --metric-only in CSV mode, due
to the AGGR_NODE slot in the 'aggr_header_csv' array not being set.
- Fix printing prefix in CSV output of 'perf stat' metrics in interval
mode (-I), where an extra separator was being added to the start of
some lines.
- Fix skipping branch stack sampling 'perf test' entry, that was using
both --branch-any and --branch-filter, which can't be used together.
* tag 'perf-tools-fixes-for-v6.1-2-2022-11-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf tools: Add the include/perf/ directory to .gitignore
perf test: Fix skipping branch stack sampling test
perf stat: Fix printing os->prefix in CSV metrics output
perf stat: Fix crash with --per-node --metric-only in CSV mode
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to add the missing PWM LEDs into the SiFive HiFive Unleashed
device tree.
- A fix to fully clear a task's registers on creation, as they end up
in userspace and thus leak kernel memory.
- A pair of VDSO-related build fixes that manifest on recent LLVM-based
toolchains.
- A fix to our early init to ensure the DT is adequately processed
before reserved memory nodes are processed.
* tag 'riscv-for-linus-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: vdso: Do not add missing symbols to version section in linker script
riscv: fix reserved memory setup
riscv: vdso: fix build with llvm
riscv: process: fix kernel info leakage
riscv: dts: sifive unleashed: Add PWM controlled LEDs
Pull kvm
"This is a pretty large diffstat for this time of the release. The main
culprit is a reorganization of the AMD assembly trampoline, allowing
percpu variables to be accessed early.
This is needed for the return stack depth tracking retbleed mitigation
that will be in 6.2, but it also makes it possible to tighten the IBRS
restore on vmexit. The latter change is a long tail of the
spectrev2/retbleed patches (the corresponding Intel change was simpler
and went in already last June), which is why I am including it right
now instead of sharing a topic branch with tip.
Being assembly and being rich in comments makes the line count balloon
a bit, but I am pretty confident in the change (famous last words)
because the reorganization actually makes everything simpler and more
understandable than before. It has also had external review and has
been tested on the aforementioned 6.2 changes, which explode quite
brutally without the fix.
Apart from this, things are pretty normal.
s390:
- PCI fix
- PV clock fix
x86:
- Fix clash between PMU MSRs and other MSRs
- Prepare SVM assembly trampoline for 6.2 retbleed mitigation and
for...
- ... tightening IBRS restore on vmexit, moving it before the first
RET or indirect branch
- Fix log level for VMSA dump
- Block all page faults during kvm_zap_gfn_range()
Tools:
- kvm_stat: fix incorrect detection of debugfs
- kvm_stat: update vmexit definitions"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/mmu: Block all page faults during kvm_zap_gfn_range()
KVM: x86/pmu: Limit the maximum number of supported AMD GP counters
KVM: x86/pmu: Limit the maximum number of supported Intel GP counters
KVM: x86/pmu: Do not speculatively query Intel GP PMCs that don't exist yet
KVM: SVM: Only dump VMSA to klog at KERN_DEBUG level
tools/kvm_stat: update exit reasons for vmx/svm/aarch64/userspace
tools/kvm_stat: fix incorrect detection of debugfs
x86, KVM: remove unnecessary argument to x86_virt_spec_ctrl and callers
KVM: SVM: move MSR_IA32_SPEC_CTRL save/restore to assembly
KVM: SVM: restore host save area from assembly
KVM: SVM: move guest vmsave/vmload back to assembly
KVM: SVM: do not allocate struct svm_cpu_data dynamically
KVM: SVM: remove dead field from struct svm_cpu_data
KVM: SVM: remove unused field from struct vcpu_svm
KVM: SVM: retrieve VMCB from assembly
KVM: SVM: adjust register allocation for __svm_vcpu_run()
KVM: SVM: replace regs argument of __svm_vcpu_run() with vcpu_svm
KVM: x86: use a separate asm-offsets.c file
KVM: s390: pci: Fix allocation size of aift kzdev elements
KVM: s390: pv: don't allow userspace to set the clock under PV
Pull hyperv fixes from Wei Liu:
- Fix TSC MSR write for root partition (Anirudh Rayabharam)
- Fix definition of vector in pci-hyperv driver (Dexuan Cui)
- A few other misc patches
* tag 'hyperv-fixes-signed-20221110' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
PCI: hv: Fix the definition of vector in hv_compose_msi_msg()
MAINTAINERS: remove sthemmin
x86/hyperv: fix invalid writes to MSRs during root partition kexec
clocksource/drivers/hyperv: add data structure for reference TSC MSR
Drivers: hv: fix repeated words in comments
x86/hyperv: Remove BUG_ON() for kmap_local_page()
Pull dmaengine fixes from Vinod Koul:
"Misc minor driver fixes and a big pile of at_hdmac driver fixes. More
work on this driver is done and sitting in next:
- Pile of at_hdmac driver rework which fixes many long standing
issues for this driver.
- couple of stm32 driver fixes for clearing structure and race fix
- idxd fixes for RO device state and batch size
- ti driver mem leak fix
- apple fix for grabbing channels in xlate
- resource leak fix in mv xor"
* tag 'dmaengine-fix-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (24 commits)
dmaengine: at_hdmac: Check return code of dma_async_device_register
dmaengine: at_hdmac: Fix impossible condition
dmaengine: at_hdmac: Don't allow CPU to reorder channel enable
dmaengine: at_hdmac: Fix completion of unissued descriptor in case of errors
dmaengine: at_hdmac: Fix descriptor handling when issuing it to hardware
dmaengine: at_hdmac: Fix concurrency over the active list
dmaengine: at_hdmac: Free the memset buf without holding the chan lock
dmaengine: at_hdmac: Fix concurrency over descriptor
dmaengine: at_hdmac: Fix concurrency problems by removing atc_complete_all()
dmaengine: at_hdmac: Protect atchan->status with the channel lock
dmaengine: at_hdmac: Do not call the complete callback on device_terminate_all
dmaengine: at_hdmac: Fix premature completion of desc in issue_pending
dmaengine: at_hdmac: Start transfer for cyclic channels in issue_pending
dmaengine: at_hdmac: Don't start transactions at tx_submit level
dmaengine: at_hdmac: Fix at_lli struct definition
dmaengine: stm32-dma: fix potential race between pause and resume
dmaengine: ti: k3-udma-glue: fix memory leak when register device fail
dmaengine: mv_xor_v2: Fix a resource leak in mv_xor_v2_remove()
dmaengine: apple-admac: Fix grabbing of channels in of_xlate
dmaengine: idxd: fix RO device state error after been disabled/reset
...
Pull spi fixes from Mark Brown:
"A relatively large batch of fixes here but all device specific, plus
an update to MAINTAINERS.
The summary print change to the STM32 driver is fixing an issue where
the driver could easily end up spamming the logs with something that
should be a debug message"
* tag 'spi-fix-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: amd: Fix SPI_SPD7 value
spi: stm32: fix stm32_spi_prepare_mbr() that halves spi clk for every run
spi: meson-spicc: fix do_div build error on non-arm64
spi: intel: Use correct mask for flash and protected regions
spi: mediatek: Fix package division error
spi: tegra210-quad: Don't initialise DMA if not supported
MAINTAINERS: Update HiSilicon SFC Driver maintainer
spi: meson-spicc: move wait completion in driver to take bursts delay in account
spi: stm32: Print summary 'callbacks suppressed' message
Pull MMC fixes from Ulf Hansson:
- Provide helper for resetting both SDHCI and CQHCI
- Fix reset for CQHCI (am654, brcmstb, esdhc-imx, of-arasan, tegra)
- Fixup support for MMC_CAP_8_BIT_DATA (esdhc-imx)
* tag 'mmc-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-esdhc-imx: use the correct host caps for MMC_CAP_8_BIT_DATA
mmc: sdhci_am654: Fix SDHCI_RESET_ALL for CQHCI
mmc: sdhci-tegra: Fix SDHCI_RESET_ALL for CQHCI
mms: sdhci-esdhc-imx: Fix SDHCI_RESET_ALL for CQHCI
mmc: sdhci-brcmstb: Fix SDHCI_RESET_ALL for CQHCI
mmc: sdhci-of-arasan: Fix SDHCI_RESET_ALL for CQHCI
mmc: cqhci: Provide helper for resetting both SDHCI and CQHCI
Pull HID fixes from Jiri Kosina:
- fix for memory leak (on error path) in Hyper-V driver (Yang
Yingliang)
- regression fix for handling 3rd barrel switch emulation in Wacom
driver (Jason Gerecke)
* tag 'for-linus-2022111101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: wacom: Fix logic used for 3rd barrel switch emulation
HID: hyperv: fix possible memory leak in mousevsc_probe()
HID: asus: Remove unused variable in asus_report_tool_width()
io_poll_double_prepare() | io_poll_wake()
| poll->head = NULL
smp_load(&poll->head); /* NULL */ |
flags = req->flags; |
| req->flags &= ~SINGLE_POLL;
req->flags = flags | DOUBLE_POLL |
The idea behind io_poll_double_prepare() is to serialise with the
first poll entry by taking the wq lock. However, it's not safe to assume
that io_poll_wake() is not running when we can't grab the lock and so we
may race modifying req->flags.
Skip double poll setup if that happens. It's ok because the first poll
entry will only be removed when it's definitely completing, e.g.
pollfree or oneshot with a valid mask.
Fixes: 49f1c68e04 ("io_uring: optimise submission side poll_refs")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/b7fab2d502f6121a7d7b199fe4d914a43ca9cdfd.1668184658.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull sound fixes from Takashi Iwai:
"Things look calming down, as this contains only a few small fixes:
- Fix for a corner-case bug with SG-buffer page allocation helper
- A regression fix for Roland USB-audio device probe
- A potential memory leak fix at the error path
- Handful quirks and device-specific fixes for HD- and USB-audio"
* tag 'sound-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda: fix potential memleak in 'add_widget_node'
ALSA: memalloc: Don't fall back for SG-buffer with IOMMU
ALSA: usb-audio: add quirk to fix Hamedal C20 disconnect issue
ALSA: hda/realtek: Add Positivo C6300 model quirk
ALSA: usb-audio: Add DSD support for Accuphase DAC-60
ALSA: usb-audio: Add quirk entry for M-Audio Micro
ALSA: hda/hdmi - enable runtime pm for more AMD display audio
ALSA: usb-audio: Remove redundant workaround for Roland quirk
ALSA: usb-audio: Yet more regression for for the delayed card registration
ALSA: hda/ca0132: add quirk for EVGA Z390 DARK
ALSA: hda: clarify comments on SCF changes
ALSA: arm: pxa: pxa2xx-ac97-lib: fix return value check of platform_get_irq()
ALSA: hda/realtek: Add quirk for ASUS Zenbook using CS35L41
Pull drm fixes from Dave Airlie:
"Weekly pull request for graphics, mostly amdgpu and i915, with a
couple of fixes for vc4 and panfrost, panel quirks and a kconfig
change for rcar-du. Nothing seems to be too strange at this stage.
amdgpu:
- Fix s/r in amdgpu_vram_mgr_new
- SMU 13.0.4 update
- GPUVM TLB race fix
- DCN 3.1.4 fixes
- DCN 3.2.x fixes
- Vega10 fan fix
- BACO fix for Beige Goby board
- PSR fix
- GPU VM PT locking fixes
amdkfd:
- CRIU fixes
vc4:
- HDMI fixes to vc4.
panfrost:
- Make panfrost's uapi header compile with C++.
- Handle 1 gb boundary correctly in panfrost mmu code.
panel:
- Add rotation quirks for 2 panels.
rcar-du:
- DSI Kconfig fix
i915:
- Fix sg_table handling in map_dma_buf
- Send PSR update also on invalidate
- Do not set cache_dirty for DGFX
- Restore userptr probe_range behaviour"
* tag 'drm-fixes-2022-11-11' of git://anongit.freedesktop.org/drm/drm: (29 commits)
drm/amd/display: only fill dirty rectangles when PSR is enabled
drm/amdgpu: disable BACO on special BEIGE_GOBY card
drm/amdgpu: Drop eviction lock when allocating PT BO
drm/amdgpu: Unlock bo_list_mutex after error handling
Revert "drm/amdgpu: Revert "drm/amdgpu: getting fan speed pwm for vega10 properly""
drm/amd/display: Enforce minimum prefetch time for low memclk on DCN32
drm/amd/display: Fix gpio port mapping issue
drm/amd/display: Fix reg timeout in enc314_enable_fifo
drm/amd/display: Fix FCLK deviation and tool compile issues
drm/amd/display: Zeromem mypipe heap struct before using it
drm/amd/display: Update SR watermarks for DCN314
drm/amdgpu: workaround for TLB seq race
drm/amdkfd: Fix error handling in criu_checkpoint
drm/amdkfd: Fix error handling in kfd_criu_restore_events
drm/amd/pm: update SMU IP v13.0.4 msg interface header
drm: rcar-du: Fix Kconfig dependency between RCAR_DU and RCAR_MIPI_DSI
drm/panfrost: Split io-pgtable requests properly
drm/amdgpu: Fix the lpfn checking condition in drm buddy
drm: panel-orientation-quirks: Add quirk for Acer Switch V 10 (SW5-017)
drm: panel-orientation-quirks: Add quirk for Nanote UMPC-01
...
get_port_from_cmdline() returns an int, yet is assigned to a char, which
is wrong in its own right, but also, with char becoming unsigned, this
poses problems, because -1 is used as an error value. Further
complicating things, fw_init_early_console() is only ever called with a
-1 argument. Fix this up by removing the unused argument from
fw_init_early_console() and treating port as a proper signed integer.
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The local GPIO driver in the MIPS Alchemy is including the legacy
<linux/gpio.h> header but what it wants is to implement a GPIO
driver so include <linux/gpio/driver.h> instead.
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: linux-gpio@vger.kernel.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add WARN_ON on kexec related kmalloc failed, avoid to pass NULL pointer
to following memcpy and loongson_kexec_prepare.
Fixes: 6ce48897ce ("MIPS: Loongson64: Add kexec/kdump support")
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Building with clang-14 fails with:
AS arch/mips/kernel/relocate_kernel.o
<unknown>:0: error: symbol 'kexec_args' is already defined
<unknown>:0: error: symbol 'secondary_kexec_args' is already defined
<unknown>:0: error: symbol 'kexec_start_address' is already defined
<unknown>:0: error: symbol 'kexec_indirection_page' is already defined
<unknown>:0: error: symbol 'relocate_new_kernel_size' is already defined
It turns out EXPORT defined in asm/asm.h expands to a symbol definition,
so there is no need to define these symbols again. Remove duplicated
symbol definitions.
Fixes: 7aa1c8f47e ("MIPS: kdump: Add support")
Signed-off-by: Rongwei Zhang <pudh4418@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
In the mips CONFIG_SYS_SUPPORTS_ZBOOT kernel, fix the compile error
when using CONFIG_FORTIFY_SOURCE=y
LD vmlinuz
mipsel-openwrt-linux-musl-ld: arch/mips/boot/compressed/decompress.o: in
function `decompress_kernel':
./include/linux/decompress/mm.h:(.text.decompress_kernel+0x177c):
undefined reference to `warn_slowpath_fmt'
kernel test robot helped identify this as related to fortify. The error
appeared with commit 54d9469bc5 ("fortify: Add run-time WARN for
cross-field memcpy()")
Link: https://lore.kernel.org/r/202209161144.x9xSqNQZ-lkp@intel.com/
Resolve this in the same style as commit cfecea6ead ("lib/string:
Move helper functions out of string.c")
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 54d9469bc5 ("fortify: Add run-time WARN for cross-field memcpy()")
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When zapping a GFN range, pass 0 => ALL_ONES for the to-be-invalidated
range to effectively block all page faults while the zap is in-progress.
The invalidation helpers take a host virtual address, whereas zapping a
GFN obviously provides a guest physical address and with the wrong unit
of measurement (frame vs. byte).
Alternatively, KVM could walk all memslots to get the associated HVAs,
but thanks to SMM, that would require multiple lookups. And practically
speaking, kvm_zap_gfn_range() usage is quite rare and not a hot path,
e.g. MTRR and CR0.CD are almost guaranteed to be done only on vCPU0
during boot, and APICv inhibits are similarly infrequent operations.
Fixes: edb298c663 ("KVM: x86/mmu: bump mmu notifier count in kvm_zap_gfn_range")
Reported-by: Chao Peng <chao.p.peng@linux.intel.com>
Cc: stable@vger.kernel.org
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221111001841.2412598-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In ata_tdev_add(), the return value of transport_add_device() is
not checked. As a result, it causes null-ptr-deref while removing
the module, because transport_remove_device() is called to remove
the device that was not added.
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0
CPU: 13 PID: 13603 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc3+ #36
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : device_del+0x48/0x3a0
lr : device_del+0x44/0x3a0
Call trace:
device_del+0x48/0x3a0
attribute_container_class_device_del+0x28/0x40
transport_remove_classdev+0x60/0x7c
attribute_container_device_trigger+0x118/0x120
transport_remove_device+0x20/0x30
ata_tdev_delete+0x24/0x50 [libata]
ata_tlink_delete+0x40/0xa0 [libata]
ata_tport_delete+0x2c/0x60 [libata]
ata_port_detach+0x148/0x1b0 [libata]
ata_pci_remove_one+0x50/0x80 [libata]
ahci_remove_one+0x4c/0x8c [ahci]
Fix this by checking and handling return value of transport_add_device()
in ata_tdev_add(). In the error path, device_del() is called to delete
the device which was added earlier in this function, and ata_tdev_free()
is called to free ata_dev.
Fixes: d9027470b8 ("[libata] Add ATA transport class")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
In ata_tlink_add(), the return value of transport_add_device() is
not checked. As a result, it causes null-ptr-deref while removing
the module, because transport_remove_device() is called to remove
the device that was not added.
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0
CPU: 33 PID: 13850 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc3+ #12
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : device_del+0x48/0x39c
lr : device_del+0x44/0x39c
Call trace:
device_del+0x48/0x39c
attribute_container_class_device_del+0x28/0x40
transport_remove_classdev+0x60/0x7c
attribute_container_device_trigger+0x118/0x120
transport_remove_device+0x20/0x30
ata_tlink_delete+0x88/0xb0 [libata]
ata_tport_delete+0x2c/0x60 [libata]
ata_port_detach+0x148/0x1b0 [libata]
ata_pci_remove_one+0x50/0x80 [libata]
ahci_remove_one+0x4c/0x8c [ahci]
Fix this by checking and handling return value of transport_add_device()
in ata_tlink_add().
Fixes: d9027470b8 ("[libata] Add ATA transport class")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
In ata_tport_add(), the return value of transport_add_device() is
not checked. As a result, it causes null-ptr-deref while removing
the module, because transport_remove_device() is called to remove
the device that was not added.
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000d0
CPU: 12 PID: 13605 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc3+ #8
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : device_del+0x48/0x39c
lr : device_del+0x44/0x39c
Call trace:
device_del+0x48/0x39c
attribute_container_class_device_del+0x28/0x40
transport_remove_classdev+0x60/0x7c
attribute_container_device_trigger+0x118/0x120
transport_remove_device+0x20/0x30
ata_tport_delete+0x34/0x60 [libata]
ata_port_detach+0x148/0x1b0 [libata]
ata_pci_remove_one+0x50/0x80 [libata]
ahci_remove_one+0x4c/0x8c [ahci]
Fix this by checking and handling return value of transport_add_device()
in ata_tport_add().
Fixes: d9027470b8 ("[libata] Add ATA transport class")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
In the error path in ata_tport_add(), when calling put_device(),
ata_tport_release() is called, it will put the refcount of 'ap->host'.
And then ata_host_put() is called again, the refcount is decreased
to 0, ata_host_release() is called, all ports are freed and set to
null.
When unbinding the device after failure, ata_host_stop() is called
to release the resources, it leads a null-ptr-deref(), because all
the ports all freed and null.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
CPU: 7 PID: 18671 Comm: modprobe Kdump: loaded Tainted: G E 6.1.0-rc3+ #8
pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : ata_host_stop+0x3c/0x84 [libata]
lr : release_nodes+0x64/0xd0
Call trace:
ata_host_stop+0x3c/0x84 [libata]
release_nodes+0x64/0xd0
devres_release_all+0xbc/0x1b0
device_unbind_cleanup+0x20/0x70
really_probe+0x158/0x320
__driver_probe_device+0x84/0x120
driver_probe_device+0x44/0x120
__driver_attach+0xb4/0x220
bus_for_each_dev+0x78/0xdc
driver_attach+0x2c/0x40
bus_add_driver+0x184/0x240
driver_register+0x80/0x13c
__pci_register_driver+0x4c/0x60
ahci_pci_driver_init+0x30/0x1000 [ahci]
Fix this by removing redundant ata_host_put() in the error path.
Fixes: 2623c7a5f2 ("libata: add refcounting to ata_host")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wifi, can and bpf.
Current release - new code bugs:
- can: af_can: can_exit(): add missing dev_remove_pack() of
canxl_packet
Previous releases - regressions:
- bpf, sockmap: fix the sk->sk_forward_alloc warning
- wifi: mac80211: fix general-protection-fault in
ieee80211_subif_start_xmit()
- can: af_can: fix NULL pointer dereference in can_rx_register()
- can: dev: fix skb drop check, avoid o-o-b access
- nfnetlink: fix potential dead lock in nfnetlink_rcv_msg()
Previous releases - always broken:
- bpf: fix wrong reg type conversion in release_reference()
- gso: fix panic on frag_list with mixed head alloc types
- wifi: brcmfmac: fix buffer overflow in brcmf_fweh_event_worker()
- wifi: mac80211: set TWT Information Frame Disabled bit as 1
- eth: macsec offload related fixes, make sure to clear the keys from
memory
- tun: fix memory leaks in the use of napi_get_frags
- tun: call napi_schedule_prep() to ensure we own a napi
- tcp: prohibit TCP_REPAIR_OPTIONS if data was already sent
- ipv6: addrlabel: fix infoleak when sending struct ifaddrlblmsg to
network
- tipc: fix a msg->req tlv length check
- sctp: clear out_curr if all frag chunks of current msg are pruned,
avoid list corruption
- mctp: fix an error handling path in mctp_init(), avoid leaks"
* tag 'net-6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (101 commits)
eth: sp7021: drop free_netdev() from spl2sw_init_netdev()
MAINTAINERS: Move Vivien to CREDITS
net: macvlan: fix memory leaks of macvlan_common_newlink
ethernet: tundra: free irq when alloc ring failed in tsi108_open()
net: mv643xx_eth: disable napi when init rxq or txq failed in mv643xx_eth_open()
ethernet: s2io: disable napi when start nic failed in s2io_card_up()
net: atlantic: macsec: clear encryption keys from the stack
net: phy: mscc: macsec: clear encryption keys when freeing a flow
stmmac: dwmac-loongson: fix missing of_node_put() while module exiting
stmmac: dwmac-loongson: fix missing pci_disable_device() in loongson_dwmac_probe()
stmmac: dwmac-loongson: fix missing pci_disable_msi() while module exiting
cxgb4vf: shut down the adapter when t4vf_update_port_info() failed in cxgb4vf_open()
mctp: Fix an error handling path in mctp_init()
stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHz
net: cxgb3_main: disable napi when bind qsets failed in cxgb_up()
net: cpsw: disable napi in cpsw_ndo_open()
iavf: Fix VF driver counting VLAN 0 filters
ice: Fix spurious interrupt during removal of trusted VF
net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions
net/mlx5e: E-Switch, Fix comparing termination table instance
...
Saeed Mahameed says:
====================
mlx5 fixes 2022-11-02
This series provides bug fixes to mlx5 driver.
* tag 'mlx5-fixes-2022-11-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actions
net/mlx5e: E-Switch, Fix comparing termination table instance
net/mlx5e: TC, Fix wrong rejection of packet-per-second policing
net/mlx5e: Fix tc acts array not to be dependent on enum order
net/mlx5e: Fix usage of DMA sync API
net/mlx5e: Add missing sanity checks for max TX WQE size
net/mlx5: fw_reset: Don't try to load device in case PCI isn't working
net/mlx5: E-switch, Set to legacy mode if failed to change switchdev mode
net/mlx5: Allow async trigger completion execution on single CPU systems
net/mlx5: Bridge, verify LAG state when adding bond to bridge
====================
Link: https://lore.kernel.org/r/20221109184050.108379-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-11-09 (ice, iavf)
This series contains updates to ice and iavf drivers.
Norbert stops disabling VF queues that are not enabled for ice driver.
Michal stops accounting of VLAN 0 filter to match expectations of PF
driver for iavf.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
iavf: Fix VF driver counting VLAN 0 filters
ice: Fix spurious interrupt during removal of trusted VF
====================
Link: https://lore.kernel.org/r/20221110003744.201414-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recently, ld.lld moved from '--undefined-version' to
'--no-undefined-version' as the default, which breaks the compat vDSO
build:
ld.lld: error: version script assignment of 'LINUX_4.15' to symbol '__vdso_gettimeofday' failed: symbol not defined
ld.lld: error: version script assignment of 'LINUX_4.15' to symbol '__vdso_clock_gettime' failed: symbol not defined
ld.lld: error: version script assignment of 'LINUX_4.15' to symbol '__vdso_clock_getres' failed: symbol not defined
These symbols are not present in the compat vDSO or the regular vDSO for
32-bit but they are unconditionally included in the version section of
the linker script, which is prohibited with '--no-undefined-version'.
Fix this issue by only including the symbols that are actually exported
in the version section of the linker script.
Link: https://github.com/ClangBuiltLinux/linux/issues/1756
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221108171324.3377226-1-nathan@kernel.org/
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, RISC-V sets up reserved memory using the "early" copy of the
device tree. As a result, when trying to get a reserved memory region
using of_reserved_mem_lookup(), the pointer to reserved memory regions
is using the early, pre-virtual-memory address which causes a kernel
panic when trying to use the buffer's name:
Unable to handle kernel paging request at virtual address 00000000401c31ac
Oops [#1]
Modules linked in:
CPU: 0 PID: 0 Comm: swapper Not tainted 6.0.0-rc1-00001-g0d9d6953d834 #1
Hardware name: Microchip PolarFire-SoC Icicle Kit (DT)
epc : string+0x4a/0xea
ra : vsnprintf+0x1e4/0x336
epc : ffffffff80335ea0 ra : ffffffff80338936 sp : ffffffff81203be0
gp : ffffffff812e0a98 tp : ffffffff8120de40 t0 : 0000000000000000
t1 : ffffffff81203e28 t2 : 7265736572203a46 s0 : ffffffff81203c20
s1 : ffffffff81203e28 a0 : ffffffff81203d22 a1 : 0000000000000000
a2 : ffffffff81203d08 a3 : 0000000081203d21 a4 : ffffffffffffffff
a5 : 00000000401c31ac a6 : ffff0a00ffffff04 a7 : ffffffffffffffff
s2 : ffffffff81203d08 s3 : ffffffff81203d00 s4 : 0000000000000008
s5 : ffffffff000000ff s6 : 0000000000ffffff s7 : 00000000ffffff00
s8 : ffffffff80d9821a s9 : ffffffff81203d22 s10: 0000000000000002
s11: ffffffff80d9821c t3 : ffffffff812f3617 t4 : ffffffff812f3617
t5 : ffffffff812f3618 t6 : ffffffff81203d08
status: 0000000200000100 badaddr: 00000000401c31ac cause: 000000000000000d
[<ffffffff80338936>] vsnprintf+0x1e4/0x336
[<ffffffff80055ae2>] vprintk_store+0xf6/0x344
[<ffffffff80055d86>] vprintk_emit+0x56/0x192
[<ffffffff80055ed8>] vprintk_default+0x16/0x1e
[<ffffffff800563d2>] vprintk+0x72/0x80
[<ffffffff806813b2>] _printk+0x36/0x50
[<ffffffff8068af48>] print_reserved_mem+0x1c/0x24
[<ffffffff808057ec>] paging_init+0x528/0x5bc
[<ffffffff808031ae>] setup_arch+0xd0/0x592
[<ffffffff8080070e>] start_kernel+0x82/0x73c
early_init_fdt_scan_reserved_mem() takes no arguments as it operates on
initial_boot_params, which is populated by early_init_dt_verify(). On
RISC-V, early_init_dt_verify() is called twice. Once, directly, in
setup_arch() if CONFIG_BUILTIN_DTB is not enabled and once indirectly,
very early in the boot process, by parse_dtb() when it calls
early_init_dt_scan_nodes().
This first call uses dtb_early_va to set initial_boot_params, which is
not usable later in the boot process when
early_init_fdt_scan_reserved_mem() is called. On arm64 for example, the
corresponding call to early_init_dt_scan_nodes() uses fixmap addresses
and doesn't suffer the same fate.
Move early_init_fdt_scan_reserved_mem() further along the boot sequence,
after the direct call to early_init_dt_verify() in setup_arch() so that
the names use the correct virtual memory addresses. The above supposed
that CONFIG_BUILTIN_DTB was not set, but should work equally in the case
where it is - unflatted_and_copy_device_tree() also updates
initial_boot_params.
Reported-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com>
Reported-by: Evgenii Shatokhin <e.shatokhin@yadro.com>
Link: https://lore.kernel.org/linux-riscv/f8e67f82-103d-156c-deb0-d6d6e2756f5e@microchip.com/
Fixes: 922b0375fc ("riscv: Fix memblock reservation for device tree blob")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Evgenii Shatokhin <e.shatokhin@yadro.com>
Link: https://lore.kernel.org/r/20221107151524.3941467-1-conor.dooley@microchip.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Currently, when mapping the EFI runtime regions in the EFI page tables,
we complain about misaligned regions in a rather noisy way, using
WARN().
Not only does this produce a lot of irrelevant clutter in the log, it is
factually incorrect, as misaligned runtime regions are actually allowed
by the EFI spec as long as they don't require conflicting memory types
within the same 64k page.
So let's drop the warning, and tweak the code so that we
- take both the start and end of the region into account when checking
for misalignment
- only revert to RWX mappings for non-code regions if misaligned code
regions are also known to exist.
Cc: <stable@vger.kernel.org>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Ampere Altra machines are reported to misbehave when the SetTime() EFI
runtime service is called after ExitBootServices() but before calling
SetVirtualAddressMap(). Given that the latter is horrid, pointless and
explicitly documented as optional by the EFI spec, we no longer invoke
it at boot if the configured size of the VA space guarantees that the
EFI runtime memory regions can remain mapped 1:1 like they are at boot
time.
On Ampere Altra machines, this results in SetTime() calls issued by the
rtc-efi driver triggering synchronous exceptions during boot. We can
now recover from those without bringing down the system entirely, due to
commit 23715a26c8 ("arm64: efi: Recover from synchronous
exceptions occurring in firmware"). However, it would be better to avoid
the issue entirely, given that the firmware appears to remain in a funny
state after this.
So attempt to identify these machines based on the 'family' field in the
type #1 SMBIOS record, and call SetVirtualAddressMap() unconditionally
in that case.
Tested-by: Alexandru Elisei <alexandru.elisei@gmail.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Even after commit 89fd4a1df8 ("riscv: jump_label: mark arguments as
const to satisfy asm constraints"), building with CC_OPTIMIZE_FOR_SIZE
+ LLVM=1 can reproduce below build error:
CC arch/riscv/kernel/vdso/vgettimeofday.o
In file included from <built-in>:4:
In file included from lib/vdso/gettimeofday.c:5:
In file included from include/vdso/datapage.h:17:
In file included from include/vdso/processor.h:10:
In file included from arch/riscv/include/asm/vdso/processor.h:7:
In file included from include/linux/jump_label.h:112:
arch/riscv/include/asm/jump_label.h:42:3: error:
invalid operand for inline asm constraint 'i'
" .option push \n\t"
^
1 error generated.
I think the problem is when "-Os" is passed as CFLAGS, it's removed by
"CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os" which is
introduced in commit e05d57dcb8 ("riscv: Fixup __vdso_gettimeofday
broke dynamic ftrace"), thus no optimization at all for vgettimeofday.c
arm64 does remove "-Os" as well, but it forces "-O2" after removing
"-Os".
I compared the generated vgettimeofday.o with "-O2" and "-Os",
I think no big performance difference. So let's tell the kbuild not
to remove "-Os" rather than follow arm64 style.
vdso related performance can be improved a lot when building kernel with
CC_OPTIMIZE_FOR_SIZE after this commit, ("-Os" VS no optimization)
Fixes: e05d57dcb8 ("riscv: Fixup __vdso_gettimeofday broke dynamic ftrace")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20221031182943.2453-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
We already check if the chosen starting offset for the buffer IDs fit
within an unsigned short, as 65535 is the maximum value for a provided
buffer. But if the caller asks to add N buffers at offset M, and M + N
would exceed the size of the unsigned short, we simply add buffers with
wrapping around the ID.
This is not necessarily a bug and could in fact be a valid use case, but
it seems confusing and inconsistent with the initial check for starting
offset. Let's check for wrap consistently, and error the addition if we
do need to wrap.
Reported-by: Olivier Langlois <olivier@trillion01.com>
Link: https://github.com/axboe/liburing/issues/726
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull btrfs fixes from David Sterba:
- revert memory optimization for scrub blocks, this misses errors in
2nd and following blocks
- add exception for ENOMEM as reason for transaction abort to not print
stack trace, syzbot has reported many
- zoned fixes:
- fix locking imbalance during scrub
- initialize zones for seeding device
- initialize zones for cloned device structures
- when looking up device, change assertion to a real check as some of
the search parameters can be passed by ioctl, reported by syzbot
- fix error pointer check in self tests
* tag 'for-6.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zoned: fix locking imbalance on scrub
btrfs: zoned: initialize device's zone info for seeding
btrfs: zoned: clone zoned device info when cloning a device
Revert "btrfs: scrub: use larger block size for data extent scrub"
btrfs: don't print stack trace when transaction is aborted due to ENOMEM
btrfs: selftests: fix wrong error check in btrfs_free_dummy_root()
btrfs: fix match incorrectly in dev_args_match_device
Pull soundwire fixes from Vinod Koul:
"Two qcom driver fixes for broadcast completion reinit and check for
outanding writes. And a lone Intel driver fix for clock stop timeout"
* tag 'soundwire-6.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: qcom: check for outanding writes before doing a read
soundwire: qcom: reinit broadcast completion
soundwire: intel: Initialize clock stop timeout
Pull hwspinlock updates from Bjorn Andersson:
"I apparently had missed tagging and sending this set of changes out
during the 6.1 merge window. But did get the associated dts changes
depending on this merged. The result is a regression in 6.1-rc on the
affected, older, Qualcomm platforms - in for form of them not booting.
So while these weren't regression fixes originally, they are now. It's
not introducing new beahavior, but simply extending the existing new
Devicetree model, to cover remaining platforms:
- extend the DeviceTree binding and implementation for the Qualcomm
hardware spinlock on some older platforms to follow the style of
the newer ones where the DeviceTree representation does not rely on
an intermediate syscon node"
* tag 'hwlock-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
dt-bindings: hwlock: qcom-hwspinlock: add syscon to MSM8974
hwspinlock: qcom: add support for MMIO on older SoCs
hwspinlock: qcom: correct MMIO max register for newer SoCs
dt-bindings: hwlock: qcom-hwspinlock: correct example indentation
dt-bindings: hwlock: qcom-hwspinlock: add support for MMIO on older SoCs
kmemleak reports memory leaks in macvlan_common_newlink, as follows:
ip link add link eth0 name .. type macvlan mode source macaddr add
<MAC-ADDR>
kmemleak reports:
unreferenced object 0xffff8880109bb140 (size 64):
comm "ip", pid 284, jiffies 4294986150 (age 430.108s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 b8 aa 5a 12 80 88 ff ff ..........Z.....
80 1b fa 0d 80 88 ff ff 1e ff ac af c7 c1 6b 6b ..............kk
backtrace:
[<ffffffff813e06a7>] kmem_cache_alloc_trace+0x1c7/0x300
[<ffffffff81b66025>] macvlan_hash_add_source+0x45/0xc0
[<ffffffff81b66a67>] macvlan_changelink_sources+0xd7/0x170
[<ffffffff81b6775c>] macvlan_common_newlink+0x38c/0x5a0
[<ffffffff81b6797e>] macvlan_newlink+0xe/0x20
[<ffffffff81d97f8f>] __rtnl_newlink+0x7af/0xa50
[<ffffffff81d98278>] rtnl_newlink+0x48/0x70
...
In the scenario where the macvlan mode is configured as 'source',
macvlan_changelink_sources() will be execured to reconfigure list of
remote source mac addresses, at the same time, if register_netdevice()
return an error, the resource generated by macvlan_changelink_sources()
is not cleaned up.
Using this patch, in the case of an error, it will execute
macvlan_flush_sources() to ensure that the resource is cleaned up.
Fixes: aa5fd0fb77 ("driver: macvlan: Destroy new macvlan port if macvlan_common_newlink failed.")
Signed-off-by: Chuang Wang <nashuiliang@gmail.com>
Link: https://lore.kernel.org/r/20221109090735.690500-1-nashuiliang@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.1
- quiet user passthrough command errors (Keith Busch)
- fix memory leak in nvmet_subsys_attr_model_store_locked
- fix a memory leak in nvmet-auth (Sagi Grimberg)"
* tag 'nvme-6.1-2022-11-10' of git://git.infradead.org/nvme:
nvmet: fix a memory leak
nvmet: fix memory leak in nvmet_subsys_attr_model_store_locked
nvme: quiet user passthrough command errors
When the non-contiguous page allocation for SG buffer allocation
fails, the memalloc helper tries to fall back to the old page
allocation methods. This would, however, result in the bogus page
addresses when IOMMU is enabled. Usually in such a case, the fallback
allocation should fail as well, but occasionally it succeeds and
hitting a bad access.
The fallback was thought for non-IOMMU case, and as the error from
dma_alloc_noncontiguous() with IOMMU essentially implies a fatal
memory allocation error, we should return the error straightforwardly
without fallback. This avoids the corner case like the above.
The patch also renames the local variable "dma_ops" with snd_ prefix
for avoiding the name conflict.
Fixes: a8d302a0b7 ("ALSA: memalloc: Revive x86-specific WC page allocations again")
Reported-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2211041541090.3532114@eliteleevi.tm.intel.com
Link: https://lore.kernel.org/r/20221110132216.30605-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When failed to start nic or add interrupt service routine in
s2io_card_up() for opening device, napi isn't disabled. When open
s2io device next time, it will trigger a BUG_ON()in napi_enable().
Compile tested only.
Fixes: 5f490c9680 ("S2io: Fixed synchronization between scheduling of napi with card reset and close")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221109023741.131552-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Antoine Tenart says:
====================
macsec: clear encryption keys in h/w drivers
Commit aaab73f8fb ("macsec: clear encryption keys from the stack after
setting up offload") made sure to clean encryption keys from the stack
after setting up offloading but some h/w drivers did a copy of the key
which need to be zeroed as well.
The MSCC PHY driver can actually be converted not to copy the encryption
key at all, but such patch would be quite difficult to backport. I'll
send a following up patch doing this in net-next once this series lands.
Tested on the MSCC PHY but not on the atlantic NIC.
====================
Link: https://lore.kernel.org/r/20221108153459.811293-1-atenart@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit aaab73f8fb ("macsec: clear encryption keys from the stack after
setting up offload") made sure to clean encryption keys from the stack
after setting up offloading, but the atlantic driver made a copy and did
not clear it. Fix this.
[4 Fixes tags below, all part of the same series, no need to split this]
Fixes: 9ff40a751a ("net: atlantic: MACSec ingress offload implementation")
Fixes: b8f8a0b7b5 ("net: atlantic: MACSec ingress offload HW bindings")
Fixes: 27736563ce ("net: atlantic: MACSec egress offload implementation")
Fixes: 9d106c6dd8 ("net: atlantic: MACSec egress offload HW bindings")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit aaab73f8fb ("macsec: clear encryption keys from the stack after
setting up offload") made sure to clean encryption keys from the stack
after setting up offloading, but the MSCC PHY driver made a copy, kept
it in the flow data and did not clear it when freeing a flow. Fix this.
Fixes: 28c5107aa9 ("net: phy: mscc: macsec support")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Yang Yingliang says:
====================
stmmac: dwmac-loongson: fixes three leaks
patch #2 fixes missing pci_disable_device() in the error path in probe()
patch #1 and pach #3 fix missing pci_disable_msi() and of_node_put() in
error and remove() path.
====================
Link: https://lore.kernel.org/r/20221108114647.4144952-1-yangyingliang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The node returned by of_get_child_by_name() with refcount decremented,
of_node_put() needs be called when finish using it. So add it in the
error path in loongson_dwmac_probe() and in loongson_dwmac_remove().
Fixes: 2ae34111fe ("stmmac: dwmac-loongson: fix invalid mdio_node")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add missing pci_disable_device() in the error path in loongson_dwmac_probe().
Fixes: 30bba69d7d ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
pci_enable_msi() has been called in loongson_dwmac_probe(),
so pci_disable_msi() needs be called in remove path and error
path of probe().
Fixes: 30bba69d7d ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, we are calling fill_dc_dirty_rects() even if PSR isn't
supported by the relevant link in amdgpu_dm_commit_planes(), this is
undesirable especially because when drm.debug is enabled we are printing
messages in fill_dc_dirty_rects() that are only useful for debugging PSR
(and confusing otherwise). So, we can instead limit the filling of dirty
rectangles to only when PSR is enabled.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-take the eviction lock immediately again after the allocation is
completed, to fix circular locking warning with drm_buddy allocator.
Move amdgpu_vm_eviction_lock/unlock/trylock to amdgpu_vm.h as they are
called from multiple files.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Get below kernel WARNING backtrace when pressing ctrl-C to kill kfdtest
application.
If amdgpu_cs_parser_bos returns error after taking bo_list_mutex, as
caller amdgpu_cs_ioctl will not unlock bo_list_mutex, this generates the
kernel WARNING.
Add unlock bo_list_mutex after amdgpu_cs_parser_bos error handling to
cleanup bo_list userptr bo.
WARNING: kfdtest/2930 still has locks held!
1 lock held by kfdtest/2930:
(&list->bo_list_mutex){+.+.}-{3:3}, at: amdgpu_cs_ioctl+0xce5/0x1f10 [amdgpu]
stack backtrace:
dump_stack_lvl+0x44/0x57
get_signal+0x79f/0xd00
arch_do_signal_or_restart+0x36/0x7b0
exit_to_user_mode_prepare+0xfd/0x1b0
syscall_exit_to_user_mode+0x19/0x40
do_syscall_64+0x40/0x80
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 4545ae2ed3.
The origin patch "drm/amdgpu: getting fan speed pwm for vega10 properly" works fine.
Test failure is caused by test case self.
Signed-off-by: Asher Song <Asher.Song@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY?]
Data return times when using lowest memclk can be <= 60us, which can cause
underflow on high bandwidth displays with a workload.
[HOW?]
Enforce a minimum prefetch time during validation for low memclk modes.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The link enablement sequence can end up resetting the encoder while
the PHY symclk isn't yet on.
This means that waiting for symclk on will timeout, along with the reset
bit never asserting high.
This causes unnecessary delay when enabling the link and produces a
warning affecting multiple IGT tests.
[How]
Don't wait for the symclk to be on here because firmware already does.
Don't wait for reset if we know the symclk isn't on.
Split the reset into a helper function that checks the bit and decides
whether or not a delay is sufficient.
Reviewed-by: Roman Li <Roman.Li@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x
[Why]
Recent backports from open source do not have header inclusion pattern
that is consistent with inclusion style in the rest of the file. This
breaks the internal tool builds as well. A recent commit erronously
modified the original DML formula for calculating
ActiveClockChangeLatencyHidingY. This resulted in a FCLK deviation
from the golden values.
[How]
Change the way in which display_mode_vba.h is included so that it is
consistent with the inclusion style in rest of the file which also fixes
the tool build. Restore the DML formula to its original state to fix the
FCLK deviation.
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Checkpoint BOs last. That way we don't need to close dmabuf FDs if
something else fails later. This avoids problematic access to user mode
memory in the error handling code path.
criu_checkpoint_bos has its own error handling and cleanup that does not
depend on access to user memory.
In the private data, keep BOs before the remaining objects. This is
necessary to restore things in the correct order as restoring events
depends on the events-page BO being restored first.
Fixes: be072b06c7 ("drm/amdkfd: CRIU export BOs as prime dmabuf objects")
Reported-by: Jann Horn <jannh@google.com>
CC: Rajneesh Bhardwaj <Rajneesh.Bhardwaj@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-and-tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
mutex_unlock before the exit label because all the error code paths that
jump there didn't take that lock. This fixes unbalanced locking errors
in case of restore errors.
Fixes: 40e8a766a7 ("drm/amdkfd: CRIU checkpoint and restore events")
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
VF driver mistakenly counts VLAN 0 filters, when no PF driver
counts them.
Do not count VLAN 0 filters, when VLAN_V2 is engaged.
Counting those filters in, will affect filters size by -1, when
sending batched VLAN addition message.
Fixes: 968996c070 ("iavf: Fix VLAN_V2 addition/rejection")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Previously, during removal of trusted VF when VF is down there was
number of spurious interrupt equal to number of queues on VF.
Add check if VF already has inactive queues. If VF is disabled and
has inactive rx queues then do not disable rx queues.
Add check in ice_vsi_stop_tx_ring if it's VF's vsi and if VF is
disabled.
Fixes: efe4186000 ("ice: Fix memory corruption in VF driver")
Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Pull slab fixes from Vlastimil Babka:
"Most are small fixups as described below.
The !CONFIG_TRACING fix is a bit bigger and would normally be done in
the next merge window as part of upcoming hardening changes. But we
realized it can make the kmalloc waste tracking introduced in this
window inaccurate, so decided to go with it now.
Summary:
- Remove !CONFIG_TRACING kmalloc() wrappers intended to save a
function call, due to incompatilibity with recently introduced
wasted space tracking and planned hardening changes.
- A tracing parameter regression fix, by Kees Cook.
- Two kernel-doc warning fixups, by Lukas Bulwahn and myself
* tag 'slab-for-6.1-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
mm, slab: remove duplicate kernel-doc comment for ksize()
mm/slab_common: Restore passing "caller" for tracing
mm/slab: remove !CONFIG_TRACING variants of kmalloc_[node_]trace()
mm/slab_common: repair kernel-doc for __ksize()
The pkt_reformat pointer being saved under flow_act and not
dest attribute in the termination table instance.
Fix the comparison pointers.
Also fix returning success if one pkt_reformat pointer is null
and the other is not.
Fixes: 249ccc3c95 ("net/mlx5e: Add support for offloading traffic from uplink to uplink")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In the bellow commit, we added support for PPS policing without
removing the check which block offload of such cases.
Fix it by removing this check.
Fixes: a8d52b024d ("net/mlx5e: TC, Support offloading police action")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
DMA sync functions should use the same direction that was used by DMA
mapping. Use DMA_BIDIRECTIONAL for XDP_TX from regular RQ, which reuses
the same mapping that was used for RX, and DMA_TO_DEVICE for XDP_TX from
XSK RQ and XDP_REDIRECT, which establish a new mapping in this
direction. On the RX side, use the same direction that was used when
setting up the mapping (DMA_BIDIRECTIONAL for XDP, DMA_FROM_DEVICE
otherwise).
Also don't skip sync for device when establishing a DMA_FROM_DEVICE
mapping for RX, as some architectures (ARM) may require invalidating
caches before the device can use the mapping. It doesn't break the
bugfix made in
commit 0b7cfa4082 ("net/mlx5e: Fix page DMA map/unmap attributes"),
since the bug happened on unmap.
Fixes: 0b7cfa4082 ("net/mlx5e: Fix page DMA map/unmap attributes")
Fixes: b5503b994e ("net/mlx5e: XDP TX forwarding support")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The commit cited below started using the firmware capability for the
maximum TX WQE size. This commit adds an important check to verify that
the driver doesn't attempt to exceed this capability, and also restores
another check mistakenly removed in the cited commit (a WQE must not
exceed the page size).
Fixes: c27bd1718c ("net/mlx5e: Read max WQEBBs on the SQ from firmware")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In case PCI reads fail after unload, there is no use in trying to
load the device.
Fixes: 5ec697446f ("net/mlx5: Add support for devlink reload action fw activate")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
No need to rollback to the other mode because probably will fail
again. Just set to legacy mode and clear fdb table created flag.
So that fdb table will not be cleared again.
Fixes: f019679ea5 ("net/mlx5: E-switch, Remove dependency between sriov and eswitch mode")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
For a single CPU system, the kernel thread executing mlx5_cmd_flush()
never releases the CPU but calls down_trylock(&cmd→sem) in a busy loop.
On a single processor system, this leads to a deadlock as the kernel
thread which executes mlx5_cmd_invoke() never gets scheduled. Fix this,
by adding the cond_resched() call to the loop, allow the command
completion kernel thread to execute.
Fixes: 8e715cd613 ("net/mlx5: Set command entry semaphore up once got index free")
Signed-off-by: Alexander Schmidt <alexschm@de.ibm.com>
Signed-off-by: Roy Novich <royno@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Mlx5 LAG is initialized asynchronously on a workqueue which means that for
a brief moment after setting mlx5 UL representors as lower devices of a
bond netdevice the LAG itself is not fully initialized in the driver. When
adding such bond device to a bridge mlx5 bridge code will not consider it
as offload-capable, skip creating necessary bookkeeping and fail any
further bridge offload-related commands with it (setting VLANs, offloading
FDBs, etc.). In order to make the error explicit during bridge
initialization stage implement the code that detects such condition during
NETDEV_PRECHANGEUPPER event and returns an error.
Fixes: ff9b752146 ("net/mlx5: Bridge, support LAG")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Before version 15.0.0 llvm's integrated assembler may silently
generate corrupted code on s390. See e.g. commit e9953b729b
("s390/boot: workaround llvm IAS bug") for further details.
While there have been workarounds applied for all known existing
locations, there is nothing that prevents that new code with
problematic patterns will be added.
Therefore raise the minimum clang version to 15.0.0. Note that llvm
commit e547b04d5b2c ("[SystemZ] Bugfix for symbolic displacements."),
which is included in 15.0.0, fixes the broken code generation.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20221031123456.3872220-1-hca@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The AMD PerfMonV2 specification allows for a maximum of 16 GP counters,
but currently only 6 pairs of MSRs are accepted by KVM.
While AMD64_NUM_COUNTERS_CORE is already equal to 6, increasing without
adjusting msrs_to_save_all[] could result in out-of-bounds accesses.
Therefore introduce a macro (named KVM_AMD_PMC_MAX_GENERIC) to
refer to the number of counters supported by KVM.
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220919091008.60695-3-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Intel Architectural IA32_PMCx MSRs addresses range allows for a
maximum of 8 GP counters, and KVM cannot address any more. Introduce a
local macro (named KVM_INTEL_PMC_MAX_GENERIC) and use it consistently to
refer to the number of counters supported by KVM, thus avoiding possible
out-of-bound accesses.
Suggested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220919091008.60695-2-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The SDM lists an architectural MSR IA32_CORE_CAPABILITIES (0xCF)
that limits the theoretical maximum value of the Intel GP PMC MSRs
allocated at 0xC1 to 14; likewise the Intel April 2022 SDM adds
IA32_OVERCLOCKING_STATUS at 0x195 which limits the number of event
selection MSRs to 15 (0x186-0x194).
Limiting the maximum number of counters to 14 or 18 based on the currently
allocated MSRs is clearly fragile, and it seems likely that Intel will
even place PMCs 8-15 at a completely different range of MSR indices.
So stop at the maximum number of GP PMCs supported today on Intel
processors.
There are some machines, like Intel P4 with non Architectural PMU, that
may indeed have 18 counters, but those counters are in a completely
different MSR address range and are not supported by KVM.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: stable@vger.kernel.org
Fixes: cf05a67b68 ("KVM: x86: omit "impossible" pmu MSRs from MSR list")
Suggested-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220919091008.60695-1-likexu@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The first field in /proc/mounts can be influenced by unprivileged users
through the widespread `fusermount` setuid-root program. Example:
```
user$ mkdir ~/mydebugfs
user$ export _FUSE_COMMFD=0
user$ fusermount ~/mydebugfs -ononempty,fsname=debugfs
user$ grep debugfs /proc/mounts
debugfs /home/user/mydebugfs fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=100 0 0
```
If there is no debugfs already mounted in the system then this can be
used by unprivileged users to trick kvm_stat into using a user
controlled file system location for obtaining KVM statistics.
Even though the root user is not allowed to access non-root FUSE mounts
for security reasons, the unprivileged user can unmount the FUSE mount
before kvm_stat uses the mounted path. If it wins the race, kvm_stat
will read from the location where the FUSE mount resided.
Note that the files in debugfs are only opened for reading, so the
attacker can cause very large data to be read in by kvm_stat, or fake
data to be processed, but there should be no viable way to turn this
into a privilege escalation.
The fix is simply to use the file system type field instead. Whitespace
in the mount path is escaped in /proc/mounts thus no further safety
measures in the parsing should be necessary to make this correct.
Message-Id: <20221103135927.13656-1-matthias.gerstner@suse.de>
Signed-off-by: Matthias Gerstner <matthias.gerstner@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
x86_virt_spec_ctrl only deals with the paravirtualized
MSR_IA32_VIRT_SPEC_CTRL now and does not handle MSR_IA32_SPEC_CTRL
anymore; remove the corresponding, unused argument.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Restoration of the host IA32_SPEC_CTRL value is probably too late
with respect to the return thunk training sequence.
With respect to the user/kernel boundary, AMD says, "If software chooses
to toggle STIBP (e.g., set STIBP on kernel entry, and clear it on kernel
exit), software should set STIBP to 1 before executing the return thunk
training sequence." I assume the same requirements apply to the guest/host
boundary. The return thunk training sequence is in vmenter.S, quite close
to the VM-exit. On hosts without V_SPEC_CTRL, however, the host's
IA32_SPEC_CTRL value is not restored until much later.
To avoid this, move the restoration of host SPEC_CTRL to assembly and,
for consistency, move the restoration of the guest SPEC_CTRL as well.
This is not particularly difficult, apart from some care to cover both
32- and 64-bit, and to share code between SEV-ES and normal vmentry.
Cc: stable@vger.kernel.org
Fixes: a149180fbc ("x86: Add magic AMD return-thunk")
Suggested-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Allow access to the percpu area via the GS segment base, which is
needed in order to access the saved host spec_ctrl value. In linux-next
FILL_RETURN_BUFFER also needs to access percpu data.
For simplicity, the physical address of the save area is added to struct
svm_cpu_data.
Cc: stable@vger.kernel.org
Fixes: a149180fbc ("x86: Add magic AMD return-thunk")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Analyzed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It is error-prone that code after vmexit cannot access percpu data
because GSBASE has not been restored yet. It forces MSR_IA32_SPEC_CTRL
save/restore to happen very late, after the predictor untraining
sequence, and it gets in the way of return stack depth tracking
(a retbleed mitigation that is in linux-next as of 2022-11-09).
As a first step towards fixing that, move the VMCB VMSAVE/VMLOAD to
assembly, essentially undoing commit fb0c4a4fee ("KVM: SVM: move
VMLOAD/VMSAVE to C code", 2021-03-15). The reason for that commit was
that it made it simpler to use a different VMCB for VMLOAD/VMSAVE versus
VMRUN; but that is not a big hassle anymore thanks to the kvm-asm-offsets
machinery and other related cleanups.
The idea on how to number the exception tables is stolen from
a prototype patch by Peter Zijlstra.
Cc: stable@vger.kernel.org
Fixes: a149180fbc ("x86: Add magic AMD return-thunk")
Link: <https://lore.kernel.org/all/f571e404-e625-bae1-10e9-449b2eb4cbd8@citrix.com/>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The svm_data percpu variable is a pointer, but it is allocated via
svm_hardware_setup() when KVM is loaded. Unlike hardware_enable()
this means that it is never NULL for the whole lifetime of KVM, and
static allocation does not waste any memory compared to the status quo.
It is also more efficient and more easily handled from assembly code,
so do it and don't look back.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The "cpu" field of struct svm_cpu_data has been write-only since commit
4b656b1202 ("KVM: SVM: force new asid on vcpu migration", 2009-08-05).
Remove it.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The pointer to svm_cpu_data in struct vcpu_svm looks interesting from
the point of view of accessing it after vmexit, when the GSBASE is still
containing the guest value. However, despite existing since the very
first commit of drivers/kvm/svm.c (commit 6aa8b732ca, "[PATCH] kvm:
userspace interface", 2006-12-10), it was never set to anything.
Ignore the opportunity to fix a 16 year old "bug" and delete it; doing
things the "harder" way makes it possible to remove more old cruft.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Continue moving accesses to struct vcpu_svm to vmenter.S. Reducing the
number of arguments limits the chance of mistakes due to different
registers used for argument passing in 32- and 64-bit ABIs; pushing the
VMCB argument and almost immediately popping it into a different
register looks pretty weird.
32-bit ABI is not a concern for __svm_sev_es_vcpu_run() which is 64-bit
only; however, it will soon need @svm to save/restore SPEC_CTRL so stay
consistent with __svm_vcpu_run() and let them share the same prototype.
No functional change intended.
Cc: stable@vger.kernel.org
Fixes: a149180fbc ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
32-bit ABI uses RAX/RCX/RDX as its argument registers, so they are in
the way of instructions that hardcode their operands such as RDMSR/WRMSR
or VMLOAD/VMRUN/VMSAVE.
In preparation for moving vmload/vmsave to __svm_vcpu_run(), keep
the pointer to the struct vcpu_svm in %rdi. In particular, it is now
possible to load svm->vmcb01.pa in %rax without clobbering the struct
vcpu_svm pointer.
No functional change intended.
Cc: stable@vger.kernel.org
Fixes: a149180fbc ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since registers are reachable through vcpu_svm, and we will
need to access more fields of that struct, pass it instead
of the regs[] array.
No functional change intended.
Cc: stable@vger.kernel.org
Fixes: a149180fbc ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This already removes an ugly #include "" from asm-offsets.c, but
especially it avoids a future error when trying to define asm-offsets
for KVM's svm/svm.h header.
This would not work for kernel/asm-offsets.c, because svm/svm.h
includes kvm_cache_regs.h which is not in the include path when
compiling asm-offsets.c. The problem is not there if the .c file is
in arch/x86/kvm.
Suggested-by: Sean Christopherson <seanjc@google.com>
Cc: stable@vger.kernel.org
Fixes: a149180fbc ("x86: Add magic AMD return-thunk")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pablo Neira Ayuso says:
====================
The following patchset contains Netfilter fixes for net:
1) Fix deadlock in nfnetlink due to missing mutex release in error path,
from Ziyang Xuan.
2) Clean up pending autoload module list from nf_tables_exit_net() path,
from Shigeru Yoshida.
3) Fixes for the netfilter's reverse path selftest, from Phil Sutter.
All of these bugs have been around for several releases.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When the R-Car MIPI DSI driver was added, it was a standalone encoder
driver without any dependency to or from the R-Car DU driver. Commit
957fe62d7d ("drm: rcar-du: Fix DSI enable & disable sequence") then
added a direct call from the DU driver to the MIPI DSI driver, without
updating Kconfig to take the new dependency into account. Fix it the
same way that the LVDS encoder is handled.
Fixes: 957fe62d7d ("drm: rcar-du: Fix DSI enable & disable sequence")
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Include linux/vmalloc.h in iosm_ipc_coredump.c &
iosm_ipc_devlink.c to resolve kernel test robot errors.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Data stall seen during peak DL throughput test & packets are
dropped by mux layer due to invalid header type in datagram.
During initlization Mux aggregration protocol is set to default
UL/DL size and TD count of Mux lite protocol. This configuration
mismatch between device and driver is resulting in data stall/packet
drops.
Override the UL/DL size and TD count for Mux aggregation protocol.
Fixes: 1f52d7b622 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With INTEL_IOMMU disable config or by forcing intel_iommu=off from
grub some of the features of IOSM driver like browsing, flashing &
coredump collection is not working.
When driver calls DMA API - dma_map_single() for tx transfers. It is
resulting in dma mapping error.
Set the device DMA addressing capabilities using dma_set_mask() and
remove the INTEL_IOMMU dependency in kconfig so that driver follows
the platform config either INTEL_IOMMU enable or disable.
Fixes: f7af616c63 ("net: iosm: infrastructure")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
ipc_pcie_read_bios_cfg() is using the acpi_evaluate_dsm() to
obtain the wwan power state configuration from BIOS but is
not freeing the acpi_object. The acpi_evaluate_dsm() returned
acpi_object to be freed.
Free the acpi_object after use.
Fixes: 7e98d785ae ("net: iosm: entry point")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver is spamming the kernel logs for entirely harmless errors from
user space submitting unsupported commands. Just silence the errors.
The application has direct access to command status, so there's no need
to log these.
And since every passthrough command now uses the quiet flag, move the
setting to the common initializer.
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Tested-by: Alan Adamson <alan.adamson@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Syzbot reported a slab-out-of-bounds Write bug:
loop0: detected capacity change from 0 to 2048
==================================================================
BUG: KASAN: slab-out-of-bounds in udf_find_entry+0x8a5/0x14f0
fs/udf/namei.c:253
Write of size 105 at addr ffff8880123ff896 by task syz-executor323/3610
CPU: 0 PID: 3610 Comm: syz-executor323 Not tainted
6.1.0-rc2-syzkaller-00105-gb229b6ca5abb #0
Hardware name: Google Compute Engine/Google Compute Engine, BIOS
Google 10/11/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106
print_address_description+0x74/0x340 mm/kasan/report.c:284
print_report+0x107/0x1f0 mm/kasan/report.c:395
kasan_report+0xcd/0x100 mm/kasan/report.c:495
kasan_check_range+0x2a7/0x2e0 mm/kasan/generic.c:189
memcpy+0x3c/0x60 mm/kasan/shadow.c:66
udf_find_entry+0x8a5/0x14f0 fs/udf/namei.c:253
udf_lookup+0xef/0x340 fs/udf/namei.c:309
lookup_open fs/namei.c:3391 [inline]
open_last_lookups fs/namei.c:3481 [inline]
path_openat+0x10e6/0x2df0 fs/namei.c:3710
do_filp_open+0x264/0x4f0 fs/namei.c:3740
do_sys_openat2+0x124/0x4e0 fs/open.c:1310
do_sys_open fs/open.c:1326 [inline]
__do_sys_creat fs/open.c:1402 [inline]
__se_sys_creat fs/open.c:1396 [inline]
__x64_sys_creat+0x11f/0x160 fs/open.c:1396
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7ffab0d164d9
Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89
f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffe1a7e6bb8 EFLAGS: 00000246 ORIG_RAX: 0000000000000055
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ffab0d164d9
RDX: 00007ffab0d164d9 RSI: 0000000000000000 RDI: 0000000020000180
RBP: 00007ffab0cd5a10 R08: 0000000000000000 R09: 0000000000000000
R10: 00005555573552c0 R11: 0000000000000246 R12: 00007ffab0cd5aa0
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
</TASK>
Allocated by task 3610:
kasan_save_stack mm/kasan/common.c:45 [inline]
kasan_set_track+0x3d/0x60 mm/kasan/common.c:52
____kasan_kmalloc mm/kasan/common.c:371 [inline]
__kasan_kmalloc+0x97/0xb0 mm/kasan/common.c:380
kmalloc include/linux/slab.h:576 [inline]
udf_find_entry+0x7b6/0x14f0 fs/udf/namei.c:243
udf_lookup+0xef/0x340 fs/udf/namei.c:309
lookup_open fs/namei.c:3391 [inline]
open_last_lookups fs/namei.c:3481 [inline]
path_openat+0x10e6/0x2df0 fs/namei.c:3710
do_filp_open+0x264/0x4f0 fs/namei.c:3740
do_sys_openat2+0x124/0x4e0 fs/open.c:1310
do_sys_open fs/open.c:1326 [inline]
__do_sys_creat fs/open.c:1402 [inline]
__se_sys_creat fs/open.c:1396 [inline]
__x64_sys_creat+0x11f/0x160 fs/open.c:1396
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The buggy address belongs to the object at ffff8880123ff800
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 150 bytes inside of
256-byte region [ffff8880123ff800, ffff8880123ff900)
The buggy address belongs to the physical page:
page:ffffea000048ff80 refcount:1 mapcount:0 mapping:0000000000000000
index:0x0 pfn:0x123fe
head:ffffea000048ff80 order:1 compound_mapcount:0 compound_pincount:0
flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff)
raw: 00fff00000010200 ffffea00004b8500 dead000000000003 ffff888012041b40
raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 0, migratetype Unmovable, gfp_mask 0x0(),
pid 1, tgid 1 (swapper/0), ts 1841222404, free_ts 0
create_dummy_stack mm/page_owner.c:67 [inline]
register_early_stack+0x77/0xd0 mm/page_owner.c:83
init_page_owner+0x3a/0x731 mm/page_owner.c:93
kernel_init_freeable+0x41c/0x5d5 init/main.c:1629
kernel_init+0x19/0x2b0 init/main.c:1519
page_owner free stack trace missing
Memory state around the buggy address:
ffff8880123ff780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8880123ff800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8880123ff880: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06
^
ffff8880123ff900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff8880123ff980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
Fix this by changing the memory size allocated for copy_name from
UDF_NAME_LEN(254) to UDF_NAME_LEN_CS0(255), because the total length
(lfi) of subsequent memcpy can be up to 255.
CC: stable@vger.kernel.org
Reported-by: syzbot+69c9fdccc6dd08961d34@syzkaller.appspotmail.com
Fixes: 066b9cded0 ("udf: Use separate buffer for copying split names")
Signed-off-by: ZhangPeng <zhangpeng362@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221109013542.442790-1-zhangpeng362@huawei.com
Add the same change for ARM64 as done in the commit 9440c42941
("x86/syscall: Include asm/ptrace.h in syscall_wrapper header") to
make sure all syscalls see 'struct pt_regs' definition and resulted
BTF for '__arm64_sys_*(struct pt_regs *regs)' functions point to
actual struct.
Without this patch, the BPF verifier refuses to load a tracing prog
which accesses pt_regs.
bpf(BPF_PROG_LOAD, {prog_type=0x1a, ...}, 128) = -1 EACCES
With this patch, we can see the correct error, which saves us time
in debugging the prog.
bpf(BPF_PROG_LOAD, {prog_type=0x1a, ...}, 128) = 4
bpf(BPF_RAW_TRACEPOINT_OPEN, {raw_tracepoint={name=NULL, prog_fd=4}}, 128) = -1 ENOTSUPP
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20221031215728.50389-1-kuniyu@amazon.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
CONFIG_UBSAN_SHIFT with gcc-5 complains that the shifting of
ARM_CPU_IMP_AMPERE (0xC0) into bits [31:24] by MIDR_CPU_MODEL() is
undefined behavior. Well, sort of, it actually spells the error as:
arch/arm64/kernel/proton-pack.c: In function 'spectre_bhb_loop_affected':
arch/arm64/include/asm/cputype.h:44:2: error: initializer element is not constant
(((imp) << MIDR_IMPLEMENTOR_SHIFT) | \
^
This isn't an issue for other Implementor codes, as all the other codes
have zero in the top bit and so are representable as a signed int.
Cast the implementor code to unsigned in MIDR_CPU_MODEL to remove the
undefined behavior.
Fixes: 0e5d5ae837 ("arm64: Add AMPERE1 to the Spectre-BHB affected list")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: D Scott Phillips <scott@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20221102160106.1096948-1-scott@os.amperecomputing.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Address a few problems with the initial test script version:
* On systems with ip6tables but no ip6tables-legacy, testing for
ip6tables was disabled by accident.
* Firewall setup phase did not respect possibly unavailable tools.
* Consistently call nft via '$nft'.
Fixes: 6e31ce831c ("selftests: netfilter: Test reverse path filtering")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Previously, the default number of transmit queues was 16. Due to
resource concerns, set to 8 queues instead. Still allow the user
to set more queues (max 16) if they like.
Since the driver is virtualized away from the physical NIC, the purpose
of multiple queues is purely to allow for parallel calls to the
hypervisor. Therefore, there is no noticeable effect on performance by
reducing queue count to 8.
Fixes: d926793c1d ("ibmveth: Implement multi queue on xmit")
Reported-by: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Link: https://lore.kernel.org/r/20221107203215.58206-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When psi annotations were added to to btrfs compression reads, the psi
state tracking over add_ra_bio_pages and btrfs_submit_compressed_read was
faulty. A pressure state, once entered, is never left. This results in
incorrectly elevated pressure, which triggers OOM kills.
pflags record the *previous* memstall state when we enter a new one. The
code tried to initialize pflags to 1, and then optimize the leave call
when we either didn't enter a memstall, or were already inside a nested
stall. However, there can be multiple PageWorkingset pages in the bio, at
which point it's that path itself that enters repeatedly and overwrites
pflags. This causes us to miss the exit.
Enter the stall only once if needed, then unwind correctly.
erofs has the same problem, fix that up too. And move the memstall exit
past submit_bio() to restore submit accounting originally added by
b8e24a9300 ("block: annotate refault stalls from IO submission").
Link: https://lkml.kernel.org/r/Y2UHRqthNUwuIQGS@cmpxchg.org
Fixes: 4088a47e78 ("btrfs: add manual PSI accounting for compressed reads")
Fixes: 99486c511f ("erofs: add manual PSI accounting for the compressed address space")
Fixes: 118f3663fb ("block: remove PSI accounting from the bio layer")
Link: https://lore.kernel.org/r/d20a0a85-e415-cf78-27f9-77dd7a94bc8d@leemhuis.info/
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Cc: Chao Yu <chao@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Sterba <dsterba@suse.com>
Cc: Gao Xiang <xiang@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If a nilfs2 filesystem is downgraded to read-only due to metadata
corruption on disk and is remounted read/write, or if emergency read-only
remount is performed, detaching a log writer and synchronizing the
filesystem can be done at the same time.
In these cases, use-after-free of the log writer (hereinafter
nilfs->ns_writer) can happen as shown in the scenario below:
Task1 Task2
-------------------------------- ------------------------------
nilfs_construct_segment
nilfs_segctor_sync
init_wait
init_waitqueue_entry
add_wait_queue
schedule
nilfs_remount (R/W remount case)
nilfs_attach_log_writer
nilfs_detach_log_writer
nilfs_segctor_destroy
kfree
finish_wait
_raw_spin_lock_irqsave
__raw_spin_lock_irqsave
do_raw_spin_lock
debug_spin_lock_before <-- use-after-free
While Task1 is sleeping, nilfs->ns_writer is freed by Task2. After Task1
waked up, Task1 accesses nilfs->ns_writer which is already freed. This
scenario diagram is based on the Shigeru Yoshida's post [1].
This patch fixes the issue by not detaching nilfs->ns_writer on remount so
that this UAF race doesn't happen. Along with this change, this patch
also inserts a few necessary read-only checks with superblock instance
where only the ns_writer pointer was used to check if the filesystem is
read-only.
Link: https://syzkaller.appspot.com/bug?id=79a4c002e960419ca173d55e863bd09e8112df8b
Link: https://lkml.kernel.org/r/20221103141759.1836312-1-syoshida@redhat.com [1]
Link: https://lkml.kernel.org/r/20221104142959.28296-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+f816fa82f8783f7a02bb@syzkaller.appspotmail.com
Reported-by: Shigeru Yoshida <syoshida@redhat.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
mfill_atomic_install_pte() checks page->mapping to detect whether one page
is used in the page cache. However as pointed out by Matthew, the page
can logically be a tail page rather than always the head in the case of
uffd minor mode with UFFDIO_CONTINUE. It means we could wrongly install
one pte with shmem thp tail page assuming it's an anonymous page.
It's not that clear even for anonymous page, since normally anonymous
pages also have page->mapping being setup with the anon vma. It's safe
here only because the only such caller to mfill_atomic_install_pte() is
always passing in a newly allocated page (mcopy_atomic_pte()), whose
page->mapping is not yet setup. However that's not extremely obvious
either.
For either of above, use page_mapping() instead.
Link: https://lkml.kernel.org/r/Y2K+y7wnhC4vbnP2@x1n
Fixes: 153132571f ("userfaultfd/shmem: support UFFDIO_CONTINUE for shmem")
Signed-off-by: Peter Xu <peterx@redhat.com>
Reported-by: Matthew Wilcox <willy@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A semaphore deadlock can occur if nilfs_get_block() detects metadata
corruption while locating data blocks and a superblock writeback occurs at
the same time:
task 1 task 2
------ ------
* A file operation *
nilfs_truncate()
nilfs_get_block()
down_read(rwsem A) <--
nilfs_bmap_lookup_contig()
... generic_shutdown_super()
nilfs_put_super()
* Prepare to write superblock *
down_write(rwsem B) <--
nilfs_cleanup_super()
* Detect b-tree corruption * nilfs_set_log_cursor()
nilfs_bmap_convert_error() nilfs_count_free_blocks()
__nilfs_error() down_read(rwsem A) <--
nilfs_set_error()
down_write(rwsem B) <--
*** DEADLOCK ***
Here, nilfs_get_block() readlocks rwsem A (= NILFS_MDT(dat_inode)->mi_sem)
and then calls nilfs_bmap_lookup_contig(), but if it fails due to metadata
corruption, __nilfs_error() is called from nilfs_bmap_convert_error()
inside the lock section.
Since __nilfs_error() calls nilfs_set_error() unless the filesystem is
read-only and nilfs_set_error() attempts to writelock rwsem B (=
nilfs->ns_sem) to write back superblock exclusively, hierarchical lock
acquisition occurs in the order rwsem A -> rwsem B.
Now, if another task starts updating the superblock, it may writelock
rwsem B during the lock sequence above, and can deadlock trying to
readlock rwsem A in nilfs_count_free_blocks().
However, there is actually no need to take rwsem A in
nilfs_count_free_blocks() because it, within the lock section, only reads
a single integer data on a shared struct with
nilfs_sufile_get_ncleansegs(). This has been the case after commit
aa474a2201 ("nilfs2: add local variable to cache the number of clean
segments"), that is, even before this bug was introduced.
So, this resolves the deadlock problem by just not taking the semaphore in
nilfs_count_free_blocks().
Link: https://lkml.kernel.org/r/20221029044912.9139-1-konishi.ryusuke@gmail.com
Fixes: e828949e5b ("nilfs2: call nilfs_error inside bmap routines")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+45d6ce7b7ad7ef455d03@syzkaller.appspotmail.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org> [2.6.38+
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There is a memory leak reported by kmemleak:
unreferenced object 0xffff88817231ce40 (size 224):
comm "mount.cifs", pid 19308, jiffies 4295917571 (age 405.880s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
60 c0 b2 00 81 88 ff ff 98 83 01 42 81 88 ff ff `..........B....
backtrace:
[<ffffffff81936171>] __alloc_file+0x21/0x250
[<ffffffff81937051>] alloc_empty_file+0x41/0xf0
[<ffffffff81937159>] alloc_file+0x59/0x710
[<ffffffff81937964>] alloc_file_pseudo+0x154/0x210
[<ffffffff81741dbf>] __shmem_file_setup+0xff/0x2a0
[<ffffffff817502cd>] shmem_zero_setup+0x8d/0x160
[<ffffffff817cc1d5>] mmap_region+0x1075/0x19d0
[<ffffffff817cd257>] do_mmap+0x727/0x1110
[<ffffffff817518b2>] vm_mmap_pgoff+0x112/0x1e0
[<ffffffff83adf955>] do_syscall_64+0x35/0x80
[<ffffffff83c0006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
The root cause was traced to an error handing path in mmap_region() when
arch_validate_flags() or mas_preallocate() fails. In the shared anonymous
mapping sence, vma will be setuped and mapped with a new shared anonymous
file via shmem_zero_setup(). So in this case, the file resource needs to
be released.
Fix it by calling fput(vma->vm_file) and unmap_region() when
arch_validate_flags() or mas_preallocate() returns an error in the shared
anonymous mapping sence.
Link: https://lkml.kernel.org/r/20221028073717.1179380-1-lizetao1@huawei.com
Fixes: d4af56c5c7 ("mm: start tracking VMAs with maple tree")
Fixes: c462ac288f ("mm: Introduce arch_validate_flags()")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This change is very similar to the change that was made for shmem [1], and
it solves the same problem but for HugeTLBFS instead.
Currently, when poison is found in a HugeTLB page, the page is removed
from the page cache. That means that attempting to map or read that
hugepage in the future will result in a new hugepage being allocated
instead of notifying the user that the page was poisoned. As [1] states,
this is effectively memory corruption.
The fix is to leave the page in the page cache. If the user attempts to
use a poisoned HugeTLB page with a syscall, the syscall will fail with
EIO, the same error code that shmem uses. For attempts to map the page,
the thread will get a BUS_MCEERR_AR SIGBUS.
[1]: commit a760542666 ("mm: shmem: don't truncate page if memory failure happens")
Link: https://lkml.kernel.org/r/20221018200125.848471-1-jthoughton@google.com
Signed-off-by: James Houghton <jthoughton@google.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Tested-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: James Houghton <jthoughton@google.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Along the development cycle, the testing code support for module/in-kernel
compiles was removed. Restore this functionality by moving any internal
API tests to the userspace side, as well as threading tests. Fix the
lockdep issues and add a way to reduce memory usage so the tests can
complete with KASAN + memleak detection. Make the tests work on 32 bit
hosts where possible and detect 32 bit hosts in the radix test suite.
[akpm@linux-foundation.org: fix module export]
[akpm@linux-foundation.org: fix it some more]
[liam.howlett@oracle.com: fix compile warnings on 32bit build in check_find()]
Link: https://lkml.kernel.org/r/20221107203816.1260327-1-Liam.Howlett@oracle.com
Link: https://lkml.kernel.org/r/20221028180415.3074673-1-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
clang-analyzer reported some Dead Stores in mas_anode_descend(). Upon
inspection, there were a few clean ups that would make the code cleaner:
The count variable was set from the mt_slots array and then updated but
never used again. Just use the array reference directly.
Also stop updating the type since it isn't used after the update.
Stop setting the gaps pointer to NULL at the start since it is always
set before the loop begins.
Link: https://lkml.kernel.org/r/20221026151413.4032730-1-Liam.Howlett@oracle.com
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Suggested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Marc Kleine-Budde says:
====================
can 2022-11-07
The first patch is by Chen Zhongjin and adds a missing
dev_remove_pack() to the AF_CAN protocol.
Zhengchao Shao's patch fixes a potential NULL pointer deref in
AF_CAN's can_rx_register().
The next patch is by Oliver Hartkopp and targets the CAN ISO-TP
protocol, and fixes the state handling for echo TX processing.
Oliver Hartkopp's patch for the j1939 protocol adds a missing
initialization of the CAN headers inside outgoing skbs.
Another patch by Oliver Hartkopp fixes an out of bounds read in the
check for invalid CAN frames in the xmit callback of virtual CAN
devices. This touches all non virtual device drivers as we decided to
rename the function requiring that netdev_priv points to a struct
can_priv.
(Note: This patch will create a merge conflict with net-next where the
pch_can driver has removed.)
The last patch is by Geert Uytterhoeven and adds the missing ECC error
checks for the channels 2-7 in the rcar_canfd driver.
* tag 'linux-can-fixes-for-6.1-20221107' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: rcar_canfd: Add missing ECC error checks for channels 2-7
can: dev: fix skb drop check
can: j1939: j1939_send_one(): fix missing CAN header initialization
can: isotp: fix tx state handling for echo tx processing
can: af_can: fix NULL pointer dereference in can_rx_register()
can: af_can: can_exit(): add missing dev_remove_pack() of canxl_packet
====================
Link: https://lore.kernel.org/r/20221107133217.59861-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported a warning like below [1]:
WARNING: CPU: 3 PID: 9 at net/netfilter/nf_tables_api.c:10096 nf_tables_exit_net+0x71c/0x840
Modules linked in:
CPU: 2 PID: 9 Comm: kworker/u8:0 Tainted: G W 6.1.0-rc3-00072-g8e5423e991e8 #47
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-1.fc36 04/01/2014
Workqueue: netns cleanup_net
RIP: 0010:nf_tables_exit_net+0x71c/0x840
...
Call Trace:
<TASK>
? __nft_release_table+0xfc0/0xfc0
ops_exit_list+0xb5/0x180
cleanup_net+0x506/0xb10
? unregister_pernet_device+0x80/0x80
process_one_work+0xa38/0x1730
? pwq_dec_nr_in_flight+0x2b0/0x2b0
? rwlock_bug.part.0+0x90/0x90
? _raw_spin_lock_irq+0x46/0x50
worker_thread+0x67e/0x10e0
? process_one_work+0x1730/0x1730
kthread+0x2e5/0x3a0
? kthread_complete_and_exit+0x40/0x40
ret_from_fork+0x1f/0x30
</TASK>
In nf_tables_exit_net(), there is a case where nft_net->commit_list is
empty but nft_net->module_list is not empty. Such a case occurs with
the following scenario:
1. nfnetlink_rcv_batch() is called
2. nf_tables_newset() returns -EAGAIN and NFNL_BATCH_FAILURE bit is
set to status
3. nf_tables_abort() is called with NFNL_ABORT_AUTOLOAD
(nft_net->commit_list is released, but nft_net->module_list is not
because of NFNL_ABORT_AUTOLOAD flag)
4. Jump to replay label
5. netlink_skb_clone() fails and returns from the function (this is
caused by fault injection in the reproducer of syzbot)
This patch fixes this issue by calling __nf_tables_abort() when
nft_net->module_list is not empty in nf_tables_exit_net().
Fixes: eb014de4fd ("netfilter: nf_tables: autoload modules from the abort path")
Link: https://syzkaller.appspot.com/bug?id=802aba2422de4218ad0c01b46c9525cc9d4e4aa3 [1]
Reported-by: syzbot+178efee9e2d7f87f5103@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
When type is NFNL_CB_MUTEX and -EAGAIN error occur in nfnetlink_rcv_msg(),
it does not execute nfnl_unlock(). That would trigger potential dead lock.
Fixes: 50f2db9e36 ("netfilter: nfnetlink: consolidate callback types")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Commit 3af1dfdd51 ("perf build: Move perf_dlfilters.h in the
source tree") moved perf_dlfilters.h to the include/perf/ directory
while include/perf is ignored because it has 'perf' in the name. Newly
created files in the include/perf/ directory will be ignored.
Testing:
Before:
$ touch tools/perf/include/perf/junk
$ git status | grep junk
$ git check-ignore -v tools/perf/include/perf/junk
tools/perf/.gitignore:6:perf tools/perf/include/perf/junk
After:
$ git status | grep junk
tools/perf/include/perf/junk
$ git check-ignore -v tools/perf/include/perf/junk
Add !include/perf/ to perf's .gitignore file.
Fixes: 3af1dfdd51 ("perf build: Move perf_dlfilters.h in the source tree")
Signed-off-by: Donglin Peng <dolinux.peng@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221103092704.173391-1-dolinux.peng@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit f4a2aade68 ("perf tests powerpc: Fix branch stack sampling
test to include sanity check for branch filter") added a skip if certain
branch options aren't available.
But the change added both -b (--branch-any) and --branch-filter options
at the same time, which will always result in a failure on any platform
because the arguments can't be used together.
Fix this by removing -b (--branch-any) and leaving --branch-filter which
already specifies 'any'. Also add warning messages to the test and perf
tool.
Output on x86 before this fix:
$ sudo ./perf test branch
108: Check branch stack sampling : Skip
After:
$ sudo ./perf test branch
108: Check branch stack sampling : Ok
Fixes: f4a2aade68 ("perf tests powerpc: Fix branch stack sampling test to include sanity check for branch filter")
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anshuman.Khandual@arm.com
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221028121913.745307-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf stat' with CSV output option prints an extra empty string as first
field in metrics output line. Sample output below:
# ./perf stat -x, --per-socket -a -C 1 ls
S0,1,1.78,msec,cpu-clock,1785146,100.00,0.973,CPUs utilized
S0,1,26,,context-switches,1781750,100.00,0.015,M/sec
S0,1,1,,cpu-migrations,1780526,100.00,0.561,K/sec
S0,1,1,,page-faults,1779060,100.00,0.561,K/sec
S0,1,875807,,cycles,1769826,100.00,0.491,GHz
S0,1,85281,,stalled-cycles-frontend,1767512,100.00,9.74,frontend cycles idle
S0,1,576839,,stalled-cycles-backend,1766260,100.00,65.86,backend cycles idle
S0,1,288430,,instructions,1762246,100.00,0.33,insn per cycle
====> ,S0,1,,,,,,,2.00,stalled cycles per insn
The above command line uses field separator as "," via "-x," option and
per-socket option displays socket value as first field. But here the
last line for "stalled cycles per insn" has "," in the beginning.
Sample output using interval mode:
# ./perf stat -I 1000 -x, --per-socket -a -C 1 ls
0.001813453,S0,1,1.87,msec,cpu-clock,1872052,100.00,0.002,CPUs utilized
0.001813453,S0,1,2,,context-switches,1868028,100.00,1.070,K/sec
------
0.001813453,S0,1,85379,,instructions,1856754,100.00,0.32,insn per cycle
====> 0.001813453,,S0,1,,,,,,,1.34,stalled cycles per insn
Above result also has an extra CSV separator after
the timestamp. Patch addresses extra field separator
in the beginning of the metric output line.
The counter stats are displayed by function
"perf_stat__print_shadow_stats" in code
"util/stat-shadow.c". While printing the stats info
for "stalled cycles per insn", function "new_line_csv"
is used as new_line callback.
The new_line_csv function has check for "os->prefix"
and if prefix is not null, it will be printed along
with cvs separator.
Snippet from "new_line_csv":
if (os->prefix)
fprintf(os->fh, "%s%s", os->prefix, config->csv_sep);
Here os->prefix gets printed followed by ","
which is the cvs separator. The os->prefix is
used in interval mode option ( -I ), to print
time stamp on every new line. But prefix is
already set to contain CSV separator when used
in interval mode for CSV option.
Reference: Function "static void print_interval"
Snippet:
sprintf(prefix, "%6lu.%09lu%s", ts->tv_sec, ts->tv_nsec, config->csv_sep);
Also if prefix is not assigned (if not used with
-I option), it gets set to empty string.
Reference: function printout() in util/stat-display.c
Snippet:
.prefix = prefix ? prefix : "",
Since prefix already set to contain cvs_sep in interval
option, patch removes printing config->csv_sep in
new_line_csv function to avoid printing extra field.
After the patch:
# ./perf stat -x, --per-socket -a -C 1 ls
S0,1,2.04,msec,cpu-clock,2045202,100.00,1.013,CPUs utilized
S0,1,2,,context-switches,2041444,100.00,979.289,/sec
S0,1,0,,cpu-migrations,2040820,100.00,0.000,/sec
S0,1,2,,page-faults,2040288,100.00,979.289,/sec
S0,1,254589,,cycles,2036066,100.00,0.125,GHz
S0,1,82481,,stalled-cycles-frontend,2032420,100.00,32.40,frontend cycles idle
S0,1,113170,,stalled-cycles-backend,2031722,100.00,44.45,backend cycles idle
S0,1,88766,,instructions,2030942,100.00,0.35,insn per cycle
S0,1,,,,,,,1.27,stalled cycles per insn
Fixes: 92a61f6412 ("perf stat: Implement CSV metrics output")
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Reviewed-By: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nageswara R Sastry <rnsastry@linux.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20221018085605.63834-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull audit fix from Paul Moore:
"A small audit patch to fix an instance of undefined behavior in a
shift operator caused when shifting a signed value too far, the same
case as the lsm patch merged previously.
While the fix is trivial and I can't imagine it causing a problem in a
backport, I'm not explicitly marking it for stable on the off chance
that there is some system out there which is relying on some wonky
unexpected behavior which this patch could break; *if* it does break,
IMO it's better that to happen in a minor or -rcX release and not in a
stable backport"
* tag 'audit-pr-20221107' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: fix undefined behavior in bit shift for AUDIT_BIT
Pull lsm fix from Paul Moore:
"A small capability patch to fix an instance of undefined behavior in a
shift operator caused when shifting a signed value too far.
While the fix is trivial and I can't imagine it causing a problem in a
backport, I'm not explicitly marking it for stable on the off chance
that there is some system out there which is relying on some wonky
unexpected behavior which this patch could break; *if* it does break,
IMO it's better that to happen in a minor or -rcX release and not in a
stable backport"
* tag 'lsm-pr-20221107' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
capabilities: fix undefined behavior in bit shift for CAP_TO_MASK
Nathan Chancellor reported several link errors on s390 with
CONFIG_RELOCATABLE disabled, after binutils commit 906f69cf65da ("IBM
zSystems: Issue error for *DBL relocs on misaligned symbols"). The binutils
commit reveals potential miscompiles that might have happened already
before with linker script defined symbols at odd addresses.
A similar bug was recently fixed in the kernel with commit c9305b6c1f
("s390: fix nospec table alignments").
See https://github.com/ClangBuiltLinux/linux/issues/1747 for an analysis
from Ulich Weigand.
Therefore always build a relocatable kernel to avoid this problem. There is
hardly any use-case for non-relocatable kernels, so this shouldn't be
controversial.
Link: https://github.com/ClangBuiltLinux/linux/issues/1747
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20221030182202.2062705-1-hca@linux.ibm.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Add kasan.config addon config file which allows to easily enable KASAN
into the current kernel config.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
CONFIG_DEBUG_INFO_BTF significantly increases compile time for the
kernel. E.g. when changing a single C file compile time for a new bzImage
is increased by ~50% if BTF debug info is generated.
Therefore remove CONFIG_DEBUG_INFO_BTF from all defconfigs and introduce a
btf.config addon config file. Quickly enabling CONFIG_DEBUG_INFO_BTF into
the current kernel config can be done by simply invoking
make btf.config
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
io_cqring_wait (and it's wake function io_has_work) used cached_cq_tail in
order to calculate the number of CQEs. cached_cq_tail is set strictly
before the user visible rings->cq.tail
However as far as userspace is concerned, if io_uring_enter(2) is called
with a minimum number of events, they will verify by checking
rings->cq.tail.
It is therefore possible for io_uring_enter(2) to return early with fewer
events visible to the user.
Instead make the wait functions read from the user visible value, so there
will be no discrepency.
This is triggered eventually by the following reproducer:
struct io_uring_sqe *sqe;
struct io_uring_cqe *cqe;
unsigned int cqe_ready;
struct io_uring ring;
int ret, i;
ret = io_uring_queue_init(N, &ring, 0);
assert(!ret);
while(true) {
for (i = 0; i < N; i++) {
sqe = io_uring_get_sqe(&ring);
io_uring_prep_nop(sqe);
sqe->flags |= IOSQE_ASYNC;
}
ret = io_uring_submit(&ring);
assert(ret == N);
do {
ret = io_uring_wait_cqes(&ring, &cqe, N, NULL, NULL);
} while(ret == -EINTR);
cqe_ready = io_uring_cq_ready(&ring);
assert(!ret);
assert(cqe_ready == N);
io_uring_cq_advance(&ring, N);
}
Fixes: ad3eb2c89f ("io_uring: split overflow state into SQ and CQ side")
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20221108153016.1854297-1-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 2e8cff0a0e ("arm64: fix rodata=full") addressed a couple of
issues with the rodata= kernel command line option, which is not a
simple boolean on arm64, and inadvertently got broken due to changes in
the generic bool handling.
Unfortunately, the resulting code never clears the rodata_full boolean
variable if it defaults to true and rodata=on or rodata=off is passed,
as the generic code is not aware of the existence of this variable.
Given the way this code is plumbed together, clearing rodata_full when
returning false from arch_parse_debug_rodata() may result in
inconsistencies if the generic code decides that it cannot parse the
right hand side, so the best way to deal with this is to only take
rodata_full in account if rodata_enabled is also true.
Fixes: 2e8cff0a0e ("arm64: fix rodata=full")
Cc: <stable@vger.kernel.org> # 6.0.x
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20221103170015.4124426-1-ardb@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In accordance with [1] the DMA-able memory buffers must be
cacheline-aligned otherwise the cache writing-back and invalidation
performed during the mapping may cause the adjacent data being lost. It's
specifically required for the DMA-noncoherent platforms [2]. Seeing the
opal_dev.{cmd,resp} buffers are implicitly used for DMAs in the NVME and
SCSI/SD drivers in framework of the nvme_sec_submit() and sd_sec_submit()
methods respectively they must be cacheline-aligned to prevent the denoted
problem. One of the option to guarantee that is to kmalloc the buffers
[2]. Let's explicitly allocate them then instead of embedding into the
opal_dev structure instance.
Note this fix was inspired by the commit c94b7f9bab ("nvme-hwmon:
kmalloc the NVME SMART log buffer").
[1] Documentation/core-api/dma-api.rst
[2] Documentation/core-api/dma-api-howto.rst
Fixes: 455a7b238c ("block: Add Sed-opal library")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221107203944.31686-1-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Current way of checking available SQE count which is based on
HW updated SQB count could result in driver submitting an SQE
even before CQE for the previously transmitted SQE at the same
index is processed in NAPI resulting losing SKB pointers,
hence a leak. Fix this by checking a consumer index which
is updated once CQE is processed.
Fixes: 3ca6c4c882 ("octeontx2-pf: Add packet transmission support")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://lore.kernel.org/r/20221107033505.2491464-1-rkannoth@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If lapb_register() failed when lapb device goes to up for the first time,
the NAPI is not disabled. As a result, the invalid opcode issue is
reported when the lapb device goes to up for the second time.
The stack info is as follows:
[ 1958.311422][T11356] kernel BUG at net/core/dev.c:6442!
[ 1958.312206][T11356] invalid opcode: 0000 [#1] PREEMPT SMP KASAN
[ 1958.315979][T11356] RIP: 0010:napi_enable+0x16a/0x1f0
[ 1958.332310][T11356] Call Trace:
[ 1958.332817][T11356] <TASK>
[ 1958.336135][T11356] lapbeth_open+0x18/0x90
[ 1958.337446][T11356] __dev_open+0x258/0x490
[ 1958.341672][T11356] __dev_change_flags+0x4d4/0x6a0
[ 1958.345325][T11356] dev_change_flags+0x93/0x160
[ 1958.346027][T11356] devinet_ioctl+0x1276/0x1bf0
[ 1958.346738][T11356] inet_ioctl+0x1c8/0x2d0
[ 1958.349638][T11356] sock_ioctl+0x5d1/0x750
[ 1958.356059][T11356] __x64_sys_ioctl+0x3ec/0x1790
[ 1958.365594][T11356] do_syscall_64+0x35/0x80
[ 1958.366239][T11356] entry_SYSCALL_64_after_hwframe+0x46/0xb0
[ 1958.377381][T11356] </TASK>
Fixes: 514e1150da ("net: x25: Queue received packets in the drivers instead of per-CPU queues")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221107011445.207372-1-shaozhengchao@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Although we tried to fix the regression for the recent changes with
the delayed card registration, it doesn't seem covering the all
cases; e.g. on Roland EDIROL M-100FX, where the generic quirk for
Roland devices is applied, it misses the card registration because the
detection of the last interface (apparently for MIDI) fails.
This patch is an attempt to recover from those failures by calling the
card register also at the error path for the secondary interfaces.
The card register condition is also extended to match with the old
check in the previous patch, too (i.e. the simple check of the
interface number) for catching the probe with errors.
Fixes: 39efc9c8a9 ("ALSA: usb-audio: Fix last interface check for registration")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.suse.com/show_bug.cgi?id=1205111
Link: https://lore.kernel.org/r/20221108065824.14418-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
SAT SCSI/ATA Translation specification requires SCSI SYNCHRONIZE CACHE
(10) and (16) commands both shall be translated to ATA flush command.
Also, ZBC Zoned Block Commands specification mandates SYNCHRONIZE CACHE
(16) command support. However, libata translates only SYNCHRONIZE CACHE
(10). This results in SYNCHRONIZE CACHE (16) command failures on SATA
drives and then libata translation does not conform to ZBC. To avoid the
failure, add support for SYNCHRONIZE CACHE (16).
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Cc: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
When disabling dma channel, a TCF flag is set and as TCIE is enabled, an
interrupt is raised.
On a busy system, the interrupt may have latency and the user can ask for
dmaengine_resume while stm32-dma driver has not yet managed the complete
pause (backup of registers to restore state in resume).
To avoid such a case, instead of waiting the interrupt to backup the
registers, do it just after disabling the channel and discard Transfer
Complete interrupt in case the channel is paused.
Fixes: 099a9a94be ("dmaengine: stm32-dma: add device_pause/device_resume support")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20221024083611.132588-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
>From Intel IAA spec [1], Intel IAA does not support batch processing.
Two batch related default values for IAA are incorrect in current code:
(1) The max batch size of device is set during device initialization,
that indicates batch is supported. It should be always 0 on IAA.
(2) The max batch size of work queue is set to WQ_DEFAULT_MAX_BATCH (32)
as the default value regardless of Intel DSA or IAA device during
work queue setup and cleanup. It should be always 0 on IAA.
Fix the issues by setting the max batch size of device and max batch
size of work queue to 0 on IAA device, that means batch is not
supported.
[1]: https://cdrdv2.intel.com/v1/dl/getContent/721858
Fixes: 23084545db ("dmaengine: idxd: set max_xfer and max_batch for RO device")
Fixes: 92452a72eb ("dmaengine: idxd: set defaults for wq configs")
Fixes: bfe1d56091 ("dmaengine: idxd: Init and probe for Intel data accelerators")
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20220930201528.18621-2-xiaochen.shen@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The first IRQ is required, but IRQs 1 through (nb_phy_chans - 1) are
optional, because on some platforms (e.g. PXA168) there is a single IRQ
shared between all channels.
This change inhibits a flood of "IRQ index # not found" messages at
startup. Tested on a PXA168-based device.
Fixes: 7723f4c5ec ("driver core: platform: Add an error message to platform_get_irq*()")
Signed-off-by: Doug Brown <doug@schmorgal.com>
Link: https://lore.kernel.org/r/20220906000709.52705-1-doug@schmorgal.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Xin Long says:
====================
sctp: fix a NULL pointer dereference in sctp_sched_dequeue_common
This issue was triggered with SCTP_PR_SCTP_PRIO in sctp,
and caused by not checking and fixing stream->out_curr
after removing a chunk from this stream.
Patch 1 removes an unnecessary check and makes the real
fix easier to add in Patch 2.
====================
Link: https://lore.kernel.org/r/cover.1667598261.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A crash was reported by Zhen Chen:
list_del corruption, ffffa035ddf01c18->next is NULL
WARNING: CPU: 1 PID: 250682 at lib/list_debug.c:49 __list_del_entry_valid+0x59/0xe0
RIP: 0010:__list_del_entry_valid+0x59/0xe0
Call Trace:
sctp_sched_dequeue_common+0x17/0x70 [sctp]
sctp_sched_fcfs_dequeue+0x37/0x50 [sctp]
sctp_outq_flush_data+0x85/0x360 [sctp]
sctp_outq_uncork+0x77/0xa0 [sctp]
sctp_cmd_interpreter.constprop.0+0x164/0x1450 [sctp]
sctp_side_effects+0x37/0xe0 [sctp]
sctp_do_sm+0xd0/0x230 [sctp]
sctp_primitive_SEND+0x2f/0x40 [sctp]
sctp_sendmsg_to_asoc+0x3fa/0x5c0 [sctp]
sctp_sendmsg+0x3d5/0x440 [sctp]
sock_sendmsg+0x5b/0x70
and in sctp_sched_fcfs_dequeue() it dequeued a chunk from stream
out_curr outq while this outq was empty.
Normally stream->out_curr must be set to NULL once all frag chunks of
current msg are dequeued, as we can see in sctp_sched_dequeue_done().
However, in sctp_prsctp_prune_unsent() as it is not a proper dequeue,
sctp_sched_dequeue_done() is not called to do this.
This patch is to fix it by simply setting out_curr to NULL when the
last frag chunk of current msg is dequeued from out_curr stream in
sctp_prsctp_prune_unsent().
Fixes: 5bbbbe32a4 ("sctp: introduce stream scheduler foundations")
Reported-by: Zhen Chen <chenzhen126@huawei.com>
Tested-by: Caowangbao <caowangbao@huawei.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 5bbbbe32a4 ("sctp: introduce stream scheduler foundations"),
sctp_stream_outq_migrate() has been called in sctp_stream_init/update to
removes those chunks to streams higher than the new max. There is no longer
need to do such check in sctp_prsctp_prune_unsent().
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a follow-up for commit 974cb0e3e7 ("tipc: fix uninit-value
in tipc_nl_compat_name_table_dump") where it should have type casted
sizeof(..) to int to work when TLV_GET_DATA_LEN() returns a negative
value.
syzbot reported a call trace because of it:
BUG: KMSAN: uninit-value in ...
tipc_nl_compat_name_table_dump+0x841/0xea0 net/tipc/netlink_compat.c:934
__tipc_nl_compat_dumpit+0xab2/0x1320 net/tipc/netlink_compat.c:238
tipc_nl_compat_dumpit+0x991/0xb50 net/tipc/netlink_compat.c:321
tipc_nl_compat_recv+0xb6e/0x1640 net/tipc/netlink_compat.c:1324
genl_family_rcv_msg_doit net/netlink/genetlink.c:731 [inline]
genl_family_rcv_msg net/netlink/genetlink.c:775 [inline]
genl_rcv_msg+0x103f/0x1260 net/netlink/genetlink.c:792
netlink_rcv_skb+0x3a5/0x6c0 net/netlink/af_netlink.c:2501
genl_rcv+0x3c/0x50 net/netlink/genetlink.c:803
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0xf3b/0x1270 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x1288/0x1440 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
Reported-by: syzbot+e5dbaaa238680ce206ea@syzkaller.appspotmail.com
Fixes: 974cb0e3e7 ("tipc: fix uninit-value in tipc_nl_compat_name_table_dump")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/ccd6a7ea801b15aec092c3b532a883b4c5708695.1667594933.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
From ZBC-1:
- RC BASIS = 0: The RETURNED LOGICAL BLOCK ADDRESS field indicates the
highest LBA of a contiguous range of zones that are not sequential write
required zones starting with the first zone.
- RC BASIS = 1: The RETURNED LOGICAL BLOCK ADDRESS field indicates the LBA
of the last logical block on the logical unit.
The current scsi_debug READ CAPACITY response does not comply with the
above if there are one or more sequential write required zones. SCSI
initiators need a way to retrieve the largest valid LBA from SCSI
devices. Reporting the largest valid LBA if there are one or more
sequential zones requires to set the RC BASIS field in the READ CAPACITY
response to one. Hence this patch.
Cc: Douglas Gilbert <dgilbert@interlog.com>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Suggested-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20221102193248.3177608-1-bvanassche@acm.org
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
While BCMGENET select BROADCOM_PHY as y, but PTP_1588_CLOCK_OPTIONAL is m,
kconfig warning and build errors:
WARNING: unmet direct dependencies detected for BROADCOM_PHY
Depends on [m]: NETDEVICES [=y] && PHYLIB [=y] && PTP_1588_CLOCK_OPTIONAL [=m]
Selected by [y]:
- BCMGENET [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_BROADCOM [=y] && HAS_IOMEM [=y] && ARCH_BCM2835 [=y]
drivers/net/phy/broadcom.o: In function `bcm54xx_suspend':
broadcom.c:(.text+0x6ac): undefined reference to `bcm_ptp_stop'
drivers/net/phy/broadcom.o: In function `bcm54xx_phy_probe':
broadcom.c:(.text+0x784): undefined reference to `bcm_ptp_probe'
drivers/net/phy/broadcom.o: In function `bcm54xx_config_init':
broadcom.c:(.text+0xd4c): undefined reference to `bcm_ptp_config_init'
Fixes: 99addbe31f ("net: broadcom: Select BROADCOM_PHY for BCMGENET")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Florian Fainelli <f.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20221105090245.8508-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If CONFIG_MACSEC=m and CONFIG_OCTEONTX2_PF=y, it leads a build error:
ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_pfaf_mbox_up_handler':
otx2_pf.c:(.text+0x181c): undefined reference to `cn10k_handle_mcs_event'
ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_probe':
otx2_pf.c:(.text+0x437e): undefined reference to `cn10k_mcs_init'
ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_remove':
otx2_pf.c:(.text+0x5031): undefined reference to `cn10k_mcs_free'
ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_mbox_up_handler_mcs_intr_notify':
otx2_pf.c:(.text+0x5f11): undefined reference to `cn10k_handle_mcs_event'
Make CONFIG_OCTEONTX2_PF depends on CONFIG_MACSEC to fix it. Because
it has empty stub functions of cn10k, CONFIG_OCTEONTX2_PF can be enabled
if CONFIG_MACSEC is disabled
Fixes: c54ffc7360 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221105063442.2013981-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If transport_add_device() fails in sas_phy_add(), the kernel will crash
trying to delete the device in transport_remove_device() called from
sas_remove_host().
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000108
CPU: 61 PID: 42829 Comm: rmmod Kdump: loaded Tainted: G W 6.1.0-rc1+ #173
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : device_del+0x54/0x3d0
lr : device_del+0x37c/0x3d0
Call trace:
device_del+0x54/0x3d0
attribute_container_class_device_del+0x28/0x38
transport_remove_classdev+0x6c/0x80
attribute_container_device_trigger+0x108/0x110
transport_remove_device+0x28/0x38
sas_phy_delete+0x30/0x60 [scsi_transport_sas]
do_sas_phy_delete+0x6c/0x80 [scsi_transport_sas]
device_for_each_child+0x68/0xb0
sas_remove_children+0x40/0x50 [scsi_transport_sas]
sas_remove_host+0x20/0x38 [scsi_transport_sas]
hisi_sas_remove+0x40/0x68 [hisi_sas_main]
hisi_sas_v2_remove+0x20/0x30 [hisi_sas_v2_hw]
platform_remove+0x2c/0x60
Fix this by checking and handling return value of transport_add_device()
in sas_phy_add().
Fixes: c7ebbbce36 ("[SCSI] SAS transport class")
Suggested-by: John Garry <john.g.garry@oracle.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221107124828.115557-1-yangyingliang@huawei.com
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are two problems with meson8b_devm_clk_prepare_enable(),
introduced in commit a54dc4a490 ("net: stmmac: dwmac-meson8b:
Make the clock enabling code re-usable"):
- It doesn't pass the clk argument, but instead always the
rgmii_tx_clk of the device.
- It silently ignores the return value of devm_add_action_or_reset().
The former didn't become an actual bug until another user showed up in
the next commit 9308c47640 ("net: stmmac: dwmac-meson8b: add support
for the RX delay configuration"). The latter means the callers could
end up with the clock not actually prepared/enabled.
Fixes: a54dc4a490 ("net: stmmac: dwmac-meson8b: Make the clock enabling code re-usable")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20221104083004.2212520-1-linux@rasmusvillemoes.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When iterating the VMAs, the maple state needs to be invalidated if the
tree is modified by a split or merge to ensure the maple tree node
contained in the maple state is still valid. These invalidations were
missed, so add them to the paths which alter the tree.
Reported-by: syzbot+0d2014e4da2ccced5b41@syzkaller.appspotmail.com
Fixes: 69dbe6daf1 (userfaultfd: use maple tree iterator to iterate VMAs)
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix an issue reported when performing a live migration when multipath is
configured with a short fast fail timeout of 5 seconds and also to have
no_path_retry set to fail. In this scenario, all paths would go into the
devloss state while the ibmvfc driver went through discovery to log back
in. On a loaded system, the discovery might take longer than 5 seconds,
which was resulting in all paths being marked failed, which then resulted
in a read only filesystem.
This patch changes the migration code in ibmvfc to avoid deleting rports at
all in this scenario, so we avoid losing all paths.
Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20221026181356.148517-1-brking@linux.vnet.ibm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pull x86 platform driver fixes from Hans de Goede:
"The most important fixes here are a set of fixes for the ACPI
backlight detection refactor which landed in 6.1.
These fix regressions reported on some laptop models by making
acpi_video_backlight_use_native() always return true for now, which in
essence undoes some of the changes.
I plan to take another shot at having only 1 /sys/class/backlight
class device per panel with 6.2, with modified detection heuristics to
avoid the (known) regressions.
Highlights:
- ACPI: video: Fix regressions from 6.1 backlight refactor by making
acpi_video_backlight_use_native() always return true for now
- Misc other bugfixes and HW id additions"
* tag 'platform-drivers-x86-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: p2sb: Don't fail if unknown CPU is found
platform/x86/intel/hid: Add some ACPI device IDs
platform/x86/intel/pmt: Sapphire Rapids PMT errata fix
platform/x86: hp_wmi: Fix rfkill causing soft blocked wifi
platform/x86: touchscreen_dmi: Add info for the RCA Cambio W101 v2 2-in-1
platform/x86: ideapad-laptop: Disable touchpad_switch
ACPI: video: Add backlight=native DMI quirk for Dell G15 5515
ACPI: video: Make acpi_video_backlight_use_native() always return true
ACPI: video: Improve Chromebook checks
Akira reports:
> "make htmldocs" reports duplicate C declaration of ksize() as follows:
> /linux/Documentation/core-api/mm-api:43: ./mm/slab_common.c:1428: WARNING: Duplicate C declaration, also defined at core-api/mm-api:212.
> Declaration is '.. c:function:: size_t ksize (const void *objp)'.
> This is due to the kernel-doc comment for ksize() declaration added in
> include/linux/slab.h by commit 05a940656e ("slab: Introduce
> kmalloc_size_roundup()").
There is an older kernel-doc comment for ksize() definition in
mm/slab_common.c, which is not only duplicated, but also contradicts the
new one - the additional storage discovered by ksize() should not be
used by callers anymore. Delete the old kernel-doc.
Reported-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/all/d33440f6-40cf-9747-3340-e54ffaf7afb8@gmail.com/
Fixes: 05a940656e ("slab: Introduce kmalloc_size_roundup()")
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
If we're doing device replace on a zoned filesystem and discover in
scrub_enumerate_chunks() that we don't have to copy the block group it is
unlocked before it gets skipped.
But as the block group hasn't yet been locked before it leads to a locking
imbalance. To fix this simply remove the unlock.
This was uncovered by fstests' testcase btrfs/163.
Fixes: 9283b9e09a ("btrfs: remove lock protection for BLOCK_GROUP_FLAG_TO_COPY")
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When performing seeding on a zoned filesystem it is necessary to
initialize each zoned device's btrfs_zoned_device_info structure,
otherwise mounting the filesystem will cause a NULL pointer dereference.
This was uncovered by fstests' testcase btrfs/163.
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When cloning a btrfs_device, we're not cloning the associated
btrfs_zoned_device_info structure of the device in case of a zoned
filesystem.
Later on this leads to a NULL pointer dereference when accessing the
device's zone_info for instance when setting a zone as active.
This was uncovered by fstests' testcase btrfs/161.
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This reverts commit 786672e9e1.
[BUG]
Since commit 786672e9e1 ("btrfs: scrub: use larger block size for data
extent scrub"), btrfs scrub no longer reports errors if the corruption
is not in the first sector of a STRIPE_LEN.
The following script can expose the problem:
mkfs.btrfs -f $dev
mount $dev $mnt
xfs_io -f -c "pwrite -S 0xff 0 8k" $mnt/foobar
umount $mnt
# 13631488 is the logical bytenr of above 8K extent
btrfs-map-logical -l 13631488 -b 4096 $dev
mirror 1 logical 13631488 physical 13631488 device /dev/test/scratch1
# Corrupt the 2nd sector of that extent
xfs_io -f -c "pwrite -S 0x00 13635584 4k" $dev
mount $dev $mnt
btrfs scrub start -B $mnt
scrub done for 54e63f9f-0c30-4c84-a33b-5c56014629b7
Scrub started: Mon Nov 7 07:18:27 2022
Status: finished
Duration: 0:00:00
Total to scrub: 536.00MiB
Rate: 0.00B/s
Error summary: no errors found <<<
[CAUSE]
That offending commit enlarges the data extent scrub size from sector
size to BTRFS_STRIPE_LEN, to avoid extra scrub_block to be allocated.
But unfortunately the data extent scrub is still heavily relying on the
fact that there is only one scrub_sector per scrub_block.
Thus it will only check the first sector, and ignoring the remaining
sectors.
Furthermore the error reporting is not able to handle multiple sectors
either.
[FIX]
For now just revert the offending commit.
The consequence is just extra memory usage during scrub.
We will need a proper change to make the remaining data scrub path to
handle multiple sectors before we enlarging the data scrub size.
Reported-by: Li Zhang <zhanglikernel@gmail.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add ENOMEM among the error codes that don't print stack trace on
transaction abort. We've got several reports from syzbot that detects
stacks as errors but caused by limiting memory. As this is an artificial
condition we don't need to know where exactly the error happens, the
abort and error cleanup will continue like e.g. for EIO.
As the transaction aborts code needs to be inline in a lot of code, the
implementation cases about minimal bloat. The error codes are in a
separate function and the WARN uses the condition directly. This
increases the code size by 571 bytes on release build.
Alternatives considered: add -ENOMEM among the errors, this increases
size by 2340 bytes, various attempts to combine the WARN and helper
calls, increase by 700 or more bytes.
Example syzbot reports (error -12):
- https://syzkaller.appspot.com/bug?extid=5244d35be7f589cf093e
- https://syzkaller.appspot.com/bug?extid=9c37714c07194d816417
Signed-off-by: David Sterba <dsterba@suse.com>
The btrfs_alloc_dummy_root() uses ERR_PTR as the error return value
rather than NULL, if error happened, there will be a NULL pointer
dereference:
BUG: KASAN: null-ptr-deref in btrfs_free_dummy_root+0x21/0x50 [btrfs]
Read of size 8 at addr 000000000000002c by task insmod/258926
CPU: 2 PID: 258926 Comm: insmod Tainted: G W 6.1.0-rc2+ #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
kasan_report+0xb7/0x140
kasan_check_range+0x145/0x1a0
btrfs_free_dummy_root+0x21/0x50 [btrfs]
btrfs_test_free_space_cache+0x1a8c/0x1add [btrfs]
btrfs_run_sanity_tests+0x65/0x80 [btrfs]
init_btrfs_fs+0xec/0x154 [btrfs]
do_one_initcall+0x87/0x2a0
do_init_module+0xdf/0x320
load_module+0x3006/0x3390
__do_sys_finit_module+0x113/0x1b0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Fixes: aaedb55bc0 ("Btrfs: add tests for btrfs_get_extent")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
syzkaller found a failed assertion:
assertion failed: (args->devid != (u64)-1) || args->missing, in fs/btrfs/volumes.c:6921
This can be triggered when we set devid to (u64)-1 by ioctl. In this
case, the match of devid will be skipped and the match of device may
succeed incorrectly.
Patch 562d7b1512 introduced this function which is used to match device.
This function contains two matching scenarios, we can distinguish them by
checking the value of args->missing rather than check whether args->devid
and args->uuid is default value.
Reported-by: syzbot+031687116258450f9853@syzkaller.appspotmail.com
Fixes: 562d7b1512 ("btrfs: handle device lookup with btrfs_dev_lookup_args")
CC: stable@vger.kernel.org # 5.16+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently on DG1, which does not have LLC, we hit the below
warning while rebinding an userptr invalidated object.
WARNING: CPU: 4 PID: 13008 at drivers/gpu/drm/i915/gem/i915_gem_pages.c:34 __i915_gem_object_set_pages+0x296/0x2d0 [i915]
...
RIP: 0010:__i915_gem_object_set_pages+0x296/0x2d0 [i915]
...
Call Trace:
<TASK>
i915_gem_userptr_get_pages+0x175/0x1a0 [i915]
____i915_gem_object_get_pages+0x32/0xb0 [i915]
i915_gem_object_userptr_submit_init+0x286/0x470 [i915]
eb_lookup_vmas+0x2ff/0xcf0 [i915]
? __intel_wakeref_get_first+0x55/0xb0 [i915]
i915_gem_do_execbuffer+0x785/0x21d0 [i915]
i915_gem_execbuffer2_ioctl+0xe7/0x3d0 [i915]
We shouldn't be setting the obj->cache_dirty for DGFX,
fix it.
Fixes: d70af57944 ("drm/i915/shmem: ensure flush during swap-in on non-LLC")
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Reported-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221102051416.27327-1-niranjana.vishwanathapura@intel.com
(cherry picked from commit 0aeec60c76)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Currently we are observing mouse cursor stuttering when using
xrandr --scaling=1.2x1.2. X scaling/transformation seems to be
doing fronbuffer rendering. When moving mouse cursor X seems to
perform several invalidates and only one DirtyFB. I.e. it seems
to be assuming updates are sent to panel while drawing is done.
Earlier we were disabling PSR in frontbuffer invalidate call back
(when drawing in X started). PSR was re-enabled in frontbuffer
flush callback (dirtyfb ioctl). This was working fine with X
scaling/transformation. Now we are just enabling continuous full
frame (cff) in PSR invalidate callback. Enabling cff doesn't
trigger any updates. It just configures PSR to send full frame
when updates are sent. I.e. there are no updates on screen before
PSR flush callback is made. X seems to be doing several updates
in frontbuffer before doing dirtyfb ioctl.
Fix this by sending single update on every invalidate callback.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kahola <mika.kahola@intel.com>
Fixes: 805f04d42a ("drm/i915/display/psr: Use continuos full frame to handle frontbuffer invalidations")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6679
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reported-by: Brian J. Tarricone <brian@tarricone.org>
Tested-by: Brian J. Tarricone <brian@tarricone.org>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221024054649.31299-1-jouni.hogander@intel.com
(cherry picked from commit d755f89220)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
In commit 4b7fe92c06 ("can: isotp: add local echo tx processing for
consecutive frames") the data flow for consecutive frames (CF) has been
reworked to improve the reliability of long data transfers.
This rework did not touch the transmission and the tx state changes of
single frame (SF) transfers which likely led to the WARN in the
isotp_tx_timer_handler() catching a wrong tx state. This patch makes use
of the improved frame processing for SF frames and sets the ISOTP_SENDING
state in isotp_sendmsg() within the cmpxchg() condition handling.
A review of the state machine and the timer handling additionally revealed
a missing echo timeout handling in the case of the burst mode in
isotp_rcv_echo() and removes a potential timer configuration uncertainty
in isotp_rcv_fc() when the receiver requests consecutive frames.
Fixes: 4b7fe92c06 ("can: isotp: add local echo tx processing for consecutive frames")
Link: https://lore.kernel.org/linux-can/CAO4mrfe3dG7cMP1V5FLUkw7s+50c9vichigUMQwsxX4M=45QEw@mail.gmail.com/T/#u
Reported-by: Wei Chen <harperchen1110@gmail.com>
Cc: stable@vger.kernel.org # v6.0
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20221104142551.16924-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
It causes NULL pointer dereference when testing as following:
(a) use syscall(__NR_socket, 0x10ul, 3ul, 0) to create netlink socket.
(b) use syscall(__NR_sendmsg, ...) to create bond link device and vxcan
link device, and bind vxcan device to bond device (can also use
ifenslave command to bind vxcan device to bond device).
(c) use syscall(__NR_socket, 0x1dul, 3ul, 1) to create CAN socket.
(d) use syscall(__NR_bind, ...) to bind the bond device to CAN socket.
The bond device invokes the can-raw protocol registration interface to
receive CAN packets. However, ml_priv is not allocated to the dev,
dev_rcv_lists is assigned to NULL in can_rx_register(). In this case,
it will occur the NULL pointer dereference issue.
The following is the stack information:
BUG: kernel NULL pointer dereference, address: 0000000000000008
PGD 122a4067 P4D 122a4067 PUD 1223c067 PMD 0
Oops: 0000 [#1] PREEMPT SMP
RIP: 0010:can_rx_register+0x12d/0x1e0
Call Trace:
<TASK>
raw_enable_filters+0x8d/0x120
raw_enable_allfilters+0x3b/0x130
raw_bind+0x118/0x4f0
__sys_bind+0x163/0x1a0
__x64_sys_bind+0x1e/0x30
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
Fixes: 4e096a1886 ("net: introduce CAN specific pointer in the struct net_device")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/all/20221028085650.170470-1-shaozhengchao@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In can_init(), dev_add_pack(&canxl_packet) is added but not removed in
can_exit(). It breaks the packet handler list and can make kernel
panic when can_init() is called for the second time.
| > modprobe can && rmmod can
| > rmmod xxx && modprobe can
|
| BUG: unable to handle page fault for address: fffffbfff807d7f4
| RIP: 0010:dev_add_pack+0x133/0x1f0
| Call Trace:
| <TASK>
| can_init+0xaa/0x1000 [can]
| do_one_initcall+0xd3/0x4e0
| ...
Fixes: fb08cba12b ("can: canxl: update CAN infrastructure for CAN XL frames")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20221031033053.37849-1-chenzhongjin@huawei.com
[mkl: adjust subject and commit message]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
[[ NOTE: this is completely untested by the author, but included solely
because, as noted in commit df57d73276 ("mmc: sdhci-pci: Fix
SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers"), "other
drivers using CQHCI might benefit from a similar change, if they
also have CQHCI reset by SDHCI_RESET_ALL." We've now seen the same
bug on at least MSM, Arasan, and Intel hardware. ]]
SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't
tracking that properly in software. When out of sync, we may trigger
various timeouts.
It's not typical to perform resets while CQE is enabled, but this may
occur in some suspend or error recovery scenarios.
Include this fix by way of the new sdhci_and_cqhci_reset() helper.
This patch depends on (and should not compile without) the patch
entitled "mmc: cqhci: Provide helper for resetting both SDHCI and
CQHCI".
Fixes: f545702b74 ("mmc: sdhci_am654: Add Support for Command Queuing Engine to J721E")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221026124150.v4.6.I35ca9d6220ba48304438b992a76647ca8e5b126f@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[[ NOTE: this is completely untested by the author, but included solely
because, as noted in commit df57d73276 ("mmc: sdhci-pci: Fix
SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers"), "other
drivers using CQHCI might benefit from a similar change, if they
also have CQHCI reset by SDHCI_RESET_ALL." We've now seen the same
bug on at least MSM, Arasan, and Intel hardware. ]]
SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't
tracking that properly in software. When out of sync, we may trigger
various timeouts.
It's not typical to perform resets while CQE is enabled, but this may
occur in some suspend or error recovery scenarios.
Include this fix by way of the new sdhci_and_cqhci_reset() helper.
This patch depends on (and should not compile without) the patch
entitled "mmc: cqhci: Provide helper for resetting both SDHCI and
CQHCI".
Fixes: 3c4019f979 ("mmc: tegra: HW Command Queue Support for Tegra SDMMC")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221026124150.v4.5.I418c9eaaf754880fcd2698113e8c3ef821a944d7@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[[ NOTE: this is completely untested by the author, but included solely
because, as noted in commit df57d73276 ("mmc: sdhci-pci: Fix
SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers"), "other
drivers using CQHCI might benefit from a similar change, if they
also have CQHCI reset by SDHCI_RESET_ALL." We've now seen the same
bug on at least MSM, Arasan, and Intel hardware. ]]
SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't
tracking that properly in software. When out of sync, we may trigger
various timeouts.
It's not typical to perform resets while CQE is enabled, but this may
occur in some suspend or error recovery scenarios.
Include this fix by way of the new sdhci_and_cqhci_reset() helper.
This patch depends on (and should not compile without) the patch
entitled "mmc: cqhci: Provide helper for resetting both SDHCI and
CQHCI".
Fixes: bb6e358169 ("mmc: sdhci-esdhc-imx: add CMDQ support")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221026124150.v4.4.I7d01f9ad11bacdc9213dee61b7918982aea39115@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[[ NOTE: this is completely untested by the author, but included solely
because, as noted in commit df57d73276 ("mmc: sdhci-pci: Fix
SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers"), "other
drivers using CQHCI might benefit from a similar change, if they
also have CQHCI reset by SDHCI_RESET_ALL." We've now seen the same
bug on at least MSM, Arasan, and Intel hardware. ]]
SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't
tracking that properly in software. When out of sync, we may trigger
various timeouts.
It's not typical to perform resets while CQE is enabled, but this may
occur in some suspend or error recovery scenarios.
Include this fix by way of the new sdhci_and_cqhci_reset() helper.
I only patch the bcm7216 variant even though others potentially *could*
provide the 'supports-cqe' property (and thus enable CQHCI), because
d46ba2d17f ("mmc: sdhci-brcmstb: Add support for Command Queuing
(CQE)") and some Broadcom folks confirm that only the 7216 variant
actually supports it.
This patch depends on (and should not compile without) the patch
entitled "mmc: cqhci: Provide helper for resetting both SDHCI and
CQHCI".
Fixes: d46ba2d17f ("mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221026124150.v4.3.I6a715feab6d01f760455865e968ecf0d85036018@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
SDHCI_RESET_ALL resets will reset the hardware CQE state, but we aren't
tracking that properly in software. When out of sync, we may trigger
various timeouts.
It's not typical to perform resets while CQE is enabled, but one
particular case I hit commonly enough: mmc_suspend() -> mmc_power_off().
Typically we will eventually deactivate CQE (cqhci_suspend() ->
cqhci_deactivate()), but that's not guaranteed -- in particular, if
we perform a partial (e.g., interrupted) system suspend.
The same bug was already found and fixed for two other drivers, in v5.7
and v5.9:
5cf583f1fb ("mmc: sdhci-msm: Deactivate CQE during SDHC reset")
df57d73276 ("mmc: sdhci-pci: Fix SDHCI_RESET_ALL for CQHCI for Intel
GLK-based controllers")
The latter is especially prescient, saying "other drivers using CQHCI
might benefit from a similar change, if they also have CQHCI reset by
SDHCI_RESET_ALL."
So like these other patches, deactivate CQHCI when resetting the
controller. Do this via the new sdhci_and_cqhci_reset() helper.
This patch depends on (and should not compile without) the patch
entitled "mmc: cqhci: Provide helper for resetting both SDHCI and
CQHCI".
Fixes: 84362d79f4 ("mmc: sdhci-of-arasan: Add CQHCI support for arasan,sdhci-5.1")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20221026124150.v4.2.I29f6a2189e84e35ad89c1833793dca9e36c64297@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Several SDHCI drivers need to deactivate command queueing in their reset
hook (see sdhci_cqhci_reset() / sdhci-pci-core.c, for example), and
several more are coming.
Those reset implementations have some small subtleties (e.g., ordering
of initialization of SDHCI vs. CQHCI might leave us resetting with a
NULL ->cqe_private), and are often identical across different host
drivers.
We also don't want to force a dependency between SDHCI and CQHCI, or
vice versa; non-SDHCI drivers use CQHCI, and SDHCI drivers might support
command queueing through some other means.
So, implement a small helper, to avoid repeating the same mistakes in
different drivers. Simply stick it in a header, because it's so small it
doesn't deserve its own module right now, and inlining to each driver is
pretty reasonable.
This is marked for -stable, as it is an important prerequisite patch for
several SDHCI controller bugfixes that follow.
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221026124150.v4.1.Ie85faa09432bfe1b0890d8c24ff95e17f3097317@changeid
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
We have accessing P2SB from a very few places for quite known hardware.
When a new SoC appears in intel-family.h it's not obvious that it needs
to be added to p2sb.c as well. Instead, provide default BDF and refactor
p2sb_get_devfn() to always succeed. If in the future we would need to
exclude something, we may add a list of unsupported IDs.
Without this change the iTCO on Intel Comet Lake SoCs became unavailable:
i801_smbus 0000:00:1f.4: failed to create iTCO device
Fixes: 5c7b9167dd ("i2c: i801: convert to use common P2SB accessor")
Reported-and-tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221104154916.35231-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
After upgrading BIOS to U82 01.02.01 Rev.A, the console is flooded
strange char "^@" which printed out every second and makes login
nearly impossible. Also the below messages were shown both in console
and journal/dmesg every second:
usb 1-3: Device not responding to setup address.
usb 1-3: device not accepting address 4, error -71
usb 1-3: device descriptor read/all, error -71
usb usb1-port3: unable to enumerate USB device
Wifi is soft blocked by checking rfkill. When unblocked manually,
after few seconds it would be soft blocked again. So I was suspecting
something triggered rfkill to soft block wifi. At the end it was
fixed by removing hp_wmi module.
The root cause is the way hp-wmi driver handles command 1B on
post-2009 BIOS. In pre-2009 BIOS, command 1Bh return 0x4 to indicate
that BIOS no longer controls the power for the wireless devices.
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216468
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20221028155527.7724-1-jorge.lopez2@hp.com
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Dell G15 5515 has the WMI interface (and WMI call returns) expected
by the nvidia-wmi-ec-backlight interface. But the backlight class device
registered by the nvidia-wmi-ec-backlight driver does not actually work.
The amdgpu_bl0 native GPU backlight class device does actually work,
add a backlight=native DMI quirk for this.
Reported-by: Iris <pawel.js@protonmail.com>
Reviewed-by: Daniel Dadap <ddadap@nvidia.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
- Add a comment that this needs to be revisited when dynamic-mux
support gets added (suggested by: Daniel Dadap)
Testing has shown that there are quite a few laptop models which rely
on native backlight control and which do not support ACPI video bus
backlight control, causing __acpi_video_get_backlight_type() to return
vendor. Known Windows laptop models affected by this are:
Acer Aspire 1640
HP Compaq nc6120
IBM ThinkPad X40
System76 Starling Star1
and the following MacBook models are affected too:
Apple MacBook 2.1
Apple MacBook 4.1
Apple MacBook Pro 7.1
the list of affected Windows laptop models is likely just the top of
the iceberg. So for now lets undo the change to not register native
backlight class devices when __acpi_video_get_backlight_type() != native.
Since as part of the backlight-detect refactor the detection code now
relies on the GPU drivers calling acpi_video_backlight_use_native() to
learn that native backlight support is available we cannot just remove
the acpi_video_backlight_use_native() calls from the GPU drivers.
Instead modify acpi_video_backlight_use_native() to always return true
for now. This is meant as a temporary work-around, which will be removed
again when the heuristics from __acpi_video_get_backlight_type() have
been improved so that they will return native on affected models.
Reported-by: Matthew Garrett <mjg59@srcf.ucam.org>
Reported-by: John Warriner <taijitu@cox.net>
Reported-by: Scott Ostrander <sos12_3@hotmail.com>
Reported-by: Matthias Rampke <matthias.rampke@googlemail.com>
Reported-by: Milan Hodoscek <hmilan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
If setsockopt with option name of TCP_REPAIR_OPTIONS and opt_code
of TCPOPT_SACK_PERM is called to enable sack after data is sent
and dupacks are received , it will trigger a warning in function
tcp_verify_left_out() as follows:
============================================
WARNING: CPU: 8 PID: 0 at net/ipv4/tcp_input.c:2132
tcp_timeout_mark_lost+0x154/0x160
tcp_enter_loss+0x2b/0x290
tcp_retransmit_timer+0x50b/0x640
tcp_write_timer_handler+0x1c8/0x340
tcp_write_timer+0xe5/0x140
call_timer_fn+0x3a/0x1b0
__run_timers.part.0+0x1bf/0x2d0
run_timer_softirq+0x43/0xb0
__do_softirq+0xfd/0x373
__irq_exit_rcu+0xf6/0x140
The warning is caused in the following steps:
1. a socket named socketA is created
2. socketA enters repair mode without build a connection
3. socketA calls connect() and its state is changed to TCP_ESTABLISHED
directly
4. socketA leaves repair mode
5. socketA calls sendmsg() to send data, packets_out and sack_outs(dup
ack receives) increase
6. socketA enters repair mode again
7. socketA calls setsockopt with TCPOPT_SACK_PERM to enable sack
8. retransmit timer expires, it calls tcp_timeout_mark_lost(), lost_out
increases
9. sack_outs + lost_out > packets_out triggers since lost_out and
sack_outs increase repeatly
In function tcp_timeout_mark_lost(), tp->sacked_out will be cleared if
Step7 not happen and the warning will not be triggered. As suggested by
Denis and Eric, TCP_REPAIR_OPTIONS should be prohibited if data was
already sent.
socket-tcp tests in CRIU has been tested as follows:
$ sudo ./test/zdtm.py run -t zdtm/static/socket-tcp* --keep-going \
--ignore-taint
socket-tcp* represent all socket-tcp tests in test/zdtm/static/.
Fixes: b139ba4e90 ("tcp: Repair connection-time negotiated parameters")
Signed-off-by: Lu Wei <luwei32@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A problem about modprobe vc4 failed is triggered with the following log
given:
[ 420.327987] Error: Driver 'vc4_hvs' is already registered, aborting...
[ 420.333904] failed to register platform driver vc4_hvs_driver [vc4]: -16
modprobe: ERROR: could not insert 'vc4': Device or resource busy
The reason is that vc4_drm_register() returns platform_driver_register()
directly without checking its return value, if platform_driver_register()
fails, it returns without unregistering all the vc4 drivers, resulting the
vc4 can never be installed later.
A simple call graph is shown as below:
vc4_drm_register()
platform_register_drivers() # all vc4 drivers are registered
platform_driver_register()
driver_register()
bus_add_driver()
priv = kzalloc(...) # OOM happened
# return without unregister drivers
Fixing this problem by checking the return value of
platform_driver_register() and do platform_unregister_drivers() if
error happened.
Fixes: c8b75bca92 ("drm/vc4: Add KMS support for Raspberry Pi.")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20221103014705.109322-1-yuancan@huawei.com
These WWAN network interface operations (create/delete/open/close)
are already protected by RTNL lock, i.e., wwan_ops.newlink(),
wwan_ops.dellink(), net_device_ops.ndo_open() and
net_device.ndo_stop() are called with RTNL lock held.
Therefore, this patch removes the unnecessary if_mutex.
Signed-off-by: Zhaoping Shu <zhaoping.shu@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
MHI driver registers network device without setting the
needs_free_netdev flag, and does NOT call free_netdev() when
unregisters network device, which causes a memory leak.
This patch sets needs_free_netdev to true when registers
network device, which makes netdev subsystem call free_netdev()
automatically after unregister_netdevice().
Fixes: aa730a9905 ("net: wwan: Add MHI MBIM network driver")
Signed-off-by: HW He <hw.he@mediatek.com>
Signed-off-by: Zhaoping Shu <zhaoping.shu@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
IOSM driver registers network device without setting the
needs_free_netdev flag, and does NOT call free_netdev() when
unregisters network device, which causes a memory leak.
This patch sets needs_free_netdev to true when registers
network device, which makes netdev subsystem call free_netdev()
automatically after unregister_netdevice().
Fixes: 2a54f2c779 ("net: iosm: net driver")
Signed-off-by: HW He <hw.he@mediatek.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Zhaoping Shu <zhaoping.shu@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When following tests are performed, it will cause dev reference counting
leakage.
a)ip link add bond2 type bond mode balance-rr
b)ip link set bond2 up
c)ifenslave -f bond2 rose1
d)ip link del bond2
When new bond device is created, the default type of the bond device is
ether. And the bond device is up, bpq_device_event() receives the message
and creates a new bpq device. In this case, the reference count value of
dev is hold once. But after "ifenslave -f bond2 rose1" command is
executed, the type of the bond device is changed to rose. When the bond
device is unregistered, bpq_device_event() will not put the dev reference
count.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When following tests are performed, it will cause dev reference counting
leakage.
a)ip link add bond2 type bond mode balance-rr
b)ip link set bond2 up
c)ifenslave -f bond2 rose1
d)ip link del bond2
When new bond device is created, the default type of the bond device is
ether. And the bond device is up, lapbeth_device_event() receives the
message and creates a new lapbeth device. In this case, the reference
count value of dev is hold once. But after "ifenslave -f bond2 rose1"
command is executed, the type of the bond device is changed to rose. When
the bond device is unregistered, lapbeth_device_event() will not put the
dev reference count.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When running under PV, the guest's TOD clock is under control of the
ultravisor and the hypervisor isn't allowed to change it. Hence, don't
allow userspace to change the guest's TOD clock by returning
-EOPNOTSUPP.
When userspace changes the guest's TOD clock, KVM updates its
kvm.arch.epoch field and, in addition, the epoch field in all state
descriptions of all VCPUs.
But, under PV, the ultravisor will ignore the epoch field in the state
description and simply overwrite it on next SIE exit with the actual
guest epoch. This leads to KVM having an incorrect view of the guest's
TOD clock: it has updated its internal kvm.arch.epoch field, but the
ultravisor ignores the field in the state description.
Whenever a guest is now waiting for a clock comparator, KVM will
incorrectly calculate the time when the guest should wake up, possibly
causing the guest to sleep for much longer than expected.
With this change, kvm_s390_set_tod() will now take the kvm->lock to be
able to call kvm_s390_pv_is_protected(). Since kvm_s390_set_tod_clock()
also takes kvm->lock, use __kvm_s390_set_tod_clock() instead.
The function kvm_s390_set_tod_clock is now unused, hence remove it.
Update the documentation to indicate the TOD clock attr calls can now
return -EOPNOTSUPP.
Fixes: 0f30350471 ("KVM: s390: protvirt: Do only reset registers that are accessible")
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Nico Boehr <nrb@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20221011160712.928239-2-nrb@linux.ibm.com
Message-Id: <20221011160712.928239-2-nrb@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
2 improvements for the Chromebook handling in
acpi_video_get_backlight_type():
1. Also check for the "GOOG000C" ACPI HID used on some models
2. Move the Chromebook check to above the ACPI-video check normally
Chromebooks don't have ACPI video backlight support, but when
flashed with upstream coreboot builds they may have ACPI video
backlight support, but native should still be used/preferred then.
Suggested-by: Mr. Chromebox <mrchromebox@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Pull cxl fixes from Dan Williams:
"Several fixes for CXL region creation crashes, leaks and failures.
This is mainly fallout from the original implementation of dynamic CXL
region creation (instantiate new physical memory pools) that arrived
in v6.0-rc1.
Given the theme of "failures in the presence of pass-through decoders"
this also includes new regression test infrastructure for that case.
Summary:
- Fix region creation crash with pass-through decoders
- Fix region creation crash when no decoder allocation fails
- Fix region creation crash when scanning regions to enforce the
increasing physical address order constraint that CXL mandates
- Fix a memory leak for cxl_pmem_region objects, track 1:N instead of
1:1 memory-device-to-region associations.
- Fix a memory leak for cxl_region objects when regions with active
targets are deleted
- Fix assignment of NUMA nodes to CXL regions by CFMWS (CXL Window)
emulated proximity domains.
- Fix region creation failure for switch attached devices downstream
of a single-port host-bridge
- Fix false positive memory leak of cxl_region objects by recycling
recently used region ids rather than freeing them
- Add regression test infrastructure for a pass-through decoder
configuration
- Fix some mailbox payload handling corner cases"
* tag 'cxl-fixes-for-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region: Recycle region ids
cxl/region: Fix 'distance' calculation with passthrough ports
tools/testing/cxl: Add a single-port host-bridge regression config
tools/testing/cxl: Fix some error exits
cxl/pmem: Fix cxl_pmem_region and cxl_memdev leak
cxl/region: Fix cxl_region leak, cleanup targets at region delete
cxl/region: Fix region HPA ordering validation
cxl/pmem: Use size_add() against integer overflow
cxl/region: Fix decoder allocation crash
ACPI: NUMA: Add CXL CFMWS 'nodes' to the possible nodes set
cxl/pmem: Fix failure to account for 8 byte header for writes to the device LSA.
cxl/region: Fix null pointer dereference due to pass through decoder commit
cxl/mbox: Add a check on input payload size
Pull hwmon fixes from Guenter Roeck:
"Fix two regressions:
- Commit 54cc3dbfc1 ("hwmon: (pmbus) Add regulator supply into
macro") resulted in regulator undercount when disabling regulators.
Revert it.
- The thermal subsystem rework caused the scmi driver to no longer
register with the thermal subsystem because index values no longer
match. To fix the problem, the scmi driver now directly registers
with the thermal subsystem, no longer through the hwmon core"
* tag 'hwmon-for-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
Revert "hwmon: (pmbus) Add regulator supply into macro"
hwmon: (scmi) Register explicitly with Thermal Framework
Pull perf fixes from Borislav Petkov:
- Add Cooper Lake's stepping to the PEBS guest/host events isolation
fixed microcode revisions checking quirk
- Update Icelake and Sapphire Rapids events constraints
- Use the standard energy unit for Sapphire Rapids in RAPL
- Fix the hw_breakpoint test to fail more graciously on !SMP configs
* tag 'perf_urgent_for_v6.1_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Add Cooper Lake stepping to isolation_ucodes[]
perf/x86/intel: Fix pebs event constraints for SPR
perf/x86/intel: Fix pebs event constraints for ICL
perf/x86/rapl: Use standard Energy Unit for SPR Dram RAPL domain
perf/hw_breakpoint: test: Skip the test if dependencies unmet
Pull x86 fixes from Borislav Petkov:
- Add new Intel CPU models
- Enforce that TDX guests are successfully loaded only on TDX hardware
where virtualization exception (#VE) delivery on kernel memory is
disabled because handling those in all possible cases is "essentially
impossible"
- Add the proper include to the syscall wrappers so that BTF can see
the real pt_regs definition and not only the forward declaration
* tag 'x86_urgent_for_v6.1_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu: Add several Intel server CPU model numbers
x86/tdx: Panic on bad configs that #VE on "private" memory access
x86/tdx: Prepare for using "INFO" call for a second purpose
x86/syscall: Include asm/ptrace.h in syscall_wrapper header
Pull Kbuild fixes from Masahiro Yamada:
- Use POSIX-compatible grep options
- Document git-related tips for reproducible builds
- Fix a typo in the modpost rule
- Suppress SIGPIPE error message from gcc-ar and llvm-ar
- Fix segmentation fault in the menuconfig search
* tag 'kbuild-fixes-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: fix segmentation fault in menuconfig search
kbuild: fix SIGPIPE error message for AR=gcc-ar and AR=llvm-ar
kbuild: fix typo in modpost
Documentation: kbuild: Add description of git for reproducible builds
kbuild: use POSIX-compatible grep option
Just a basic s/thig/this swap, fixing up a typo introduced by a commit
added in the 6.1 release.
Fixes: 9cda70f622 ("io_uring: introduce fixed buffer support for io_uring_cmd")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix the pKVM stage-1 walker erronously using the stage-2 accessor
- Correctly convert vcpu->kvm to a hyp pointer when generating an
exception in a nVHE+MTE configuration
- Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them
- Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
- Document the boot requirements for FGT when entering the kernel at
EL1
x86:
- Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()
- Make argument order consistent for kvcalloc()
- Userspace API fixes for DEBUGCTL and LBRs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Fix a typo about the usage of kvcalloc()
KVM: x86: Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()
KVM: VMX: Ignore guest CPUID for host userspace writes to DEBUGCTL
KVM: VMX: Fold vmx_supported_debugctl() into vcpu_supported_debugctl()
KVM: VMX: Advertise PMU LBRs if and only if perf supports LBRs
arm64: booting: Document our requirements for fine grained traps with SME
KVM: arm64: Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
KVM: Check KVM_CAP_DIRTY_LOG_{RING, RING_ACQ_REL} prior to enabling them
KVM: arm64: Fix bad dereference on MTE-enabled systems
KVM: arm64: Use correct accessor to parse stage-1 PTEs
Pull xen fixes from Juergen Gross:
"One fix for silencing a smatch warning, and a small cleanup patch"
* tag 'for-linus-6.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: simplify sysenter and syscall setup
x86/xen: silence smatch warning in pmu_msr_chk_emulated()
Pull ext4 fixes from Ted Ts'o:
"Fix a number of bugs, including some regressions, the most serious of
which was one which would cause online resizes to fail with file
systems with metadata checksums enabled.
Also fix a warning caused by the newly added fortify string checker,
plus some bugs that were found using fuzzed file systems"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix fortify warning in fs/ext4/fast_commit.c:1551
ext4: fix wrong return err in ext4_load_and_init_journal()
ext4: fix warning in 'ext4_da_release_space'
ext4: fix BUG_ON() when directory entry has invalid rec_len
ext4: update the backup superblock's at the end of the online resize
Pull cifs fixes from Steve French:
"One symlink handling fix and two fixes foir multichannel issues with
iterating channels, including for oplock breaks when leases are
disabled"
* tag '6.1-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix use-after-free on the link name
cifs: avoid unnecessary iteration of tcp sessions
cifs: always iterate smb sessions using primary channel
Pull `lTracing fixes for 6.1-rc3:
- Fixed NULL pointer dereference in the ring buffer wait-waiters code
for machines that have less CPUs than what nr_cpu_ids returns.
The buffer array is of size nr_cpu_ids, but only the online CPUs get
initialized.
- Fixed use after free call in ftrace_shutdown.
- Fix accounting of if a kprobe is enabled
- Fix NULL pointer dereference on error path of fprobe rethook_alloc().
- Fix unregistering of fprobe_kprobe_handler
- Fix memory leak in kprobe test module
* tag 'trace-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: kprobe: Fix memory leak in test_gen_kprobe/kretprobe_cmd()
tracing/fprobe: Fix to check whether fprobe is registered correctly
fprobe: Check rethook_alloc() return in rethook initialization
kprobe: reverse kp->flags when arm_kprobe failed
ftrace: Fix use-after-free for dynamic ftrace_ops
ring-buffer: Check for NULL cpu_buffer in ring_buffer_wake_waiters()
* Fix the pKVM stage-1 walker erronously using the stage-2 accessor
* Correctly convert vcpu->kvm to a hyp pointer when generating
an exception in a nVHE+MTE configuration
* Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them
* Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
* Document the boot requirements for FGT when entering the kernel
at EL1
x86:
* Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()
* Make argument order consistent for kvcalloc()
* Userspace API fixes for DEBUGCTL and LBRs
With the new fortify string system, rework the memcpy to avoid this
warning:
memcpy: detected field-spanning write (size 60) of single field "&raw_inode->i_generation" at fs/ext4/fast_commit.c:1551 (size 4)
Cc: stable@kernel.org
Fixes: 54d9469bc5 ("fortify: Add run-time WARN for cross-field memcpy()")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The return value is wrong in ext4_load_and_init_journal(). The local
variable 'err' need to be initialized before goto out. The original code
in __ext4_fill_super() is fine because it has two return values 'ret'
and 'err' and 'ret' is initialized as -EINVAL. After we factor out
ext4_load_and_init_journal(), this code is broken. So fix it by directly
returning -EINVAL in the error handler path.
Cc: stable@kernel.org
Fixes: 9c1dd22d74 ("ext4: factor out ext4_load_and_init_journal()")
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221025040206.3134773-1-yanaijie@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
The rec_len field in the directory entry has to be a multiple of 4. A
corrupted filesystem image can be used to hit a BUG() in
ext4_rec_len_to_disk(), called from make_indexed_dir().
------------[ cut here ]------------
kernel BUG at fs/ext4/ext4.h:2413!
...
RIP: 0010:make_indexed_dir+0x53f/0x5f0
...
Call Trace:
<TASK>
? add_dirent_to_buf+0x1b2/0x200
ext4_add_entry+0x36e/0x480
ext4_add_nondir+0x2b/0xc0
ext4_create+0x163/0x200
path_openat+0x635/0xe90
do_filp_open+0xb4/0x160
? __create_object.isra.0+0x1de/0x3b0
? _raw_spin_unlock+0x12/0x30
do_sys_openat2+0x91/0x150
__x64_sys_open+0x6c/0xa0
do_syscall_64+0x3c/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
The fix simply adds a call to ext4_check_dir_entry() to validate the
directory entry, returning -EFSCORRUPTED if the entry is invalid.
CC: stable@kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216540
Signed-off-by: Luís Henriques <lhenriques@suse.de>
Link: https://lore.kernel.org/r/20221012131330.32456-1-lhenriques@suse.de
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Pull ACPI fix from Rafael Wysocki:
"Add StorageD3Enable quirk for Dell Inspiron 16 5625 (Mario
Limonciello)"
* tag 'acpi-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: x86: Add another system to quirk list for forcing StorageD3Enable
Pull block fixes from Jens Axboe:
- Fixes for the ublk driver (Ming)
- Fixes for error handling memory leaks (Chen Jun, Chen Zhongjin)
- Explicitly clear the last request in a chain when the plug is
flushed, as it may have already been issued (Al)
* tag 'block-6.1-2022-11-05' of git://git.kernel.dk/linux:
block: blk_add_rq_to_plug(): clear stale 'last' after flush
blk-mq: Fix kmemleak in blk_mq_init_allocated_queue
block: Fix possible memory leak for rq_wb on add_disk failure
ublk_drv: add ublk_queue_cmd() for cleanup
ublk_drv: avoid to touch io_uring cmd in blk_mq io path
ublk_drv: comment on ublk_driver entry of Kconfig
ublk_drv: return flag of UBLK_F_URING_CMD_COMP_IN_TASK in case of module
When we fail to insert into the hashtable with a non-retryable error,
we'll free the object and then goto out_status. If the tracepoint is
enabled, it'll end up accessing the freed object when it tries to
grab the fields out of it.
Set nf to NULL after freeing it to avoid the issue.
Fixes: 243a526301 ("nfsd: rework hashtable handling in nfsd_do_file_acquire")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in security/commoncap.c:1252:2
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xa5
dump_stack+0x15/0x1b
ubsan_epilogue+0xe/0x4e
__ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
cap_task_prctl+0x561/0x6f0
security_task_prctl+0x5a/0xb0
__x64_sys_prctl+0x61/0x8f0
do_syscall_64+0x58/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
Fixes: e338d263a7 ("Add 64-bit capability support to the kernel")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Acked-by: Andrew G. Morgan <morgan@kernel.org>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
xfstests generic/011 reported use-after-free bug as follows:
BUG: KASAN: use-after-free in __d_alloc+0x269/0x859
Read of size 15 at addr ffff8880078933a0 by task dirstress/952
CPU: 1 PID: 952 Comm: dirstress Not tainted 6.1.0-rc3+ #77
Call Trace:
__dump_stack+0x23/0x29
dump_stack_lvl+0x51/0x73
print_address_description+0x67/0x27f
print_report+0x3e/0x5c
kasan_report+0x7b/0xa8
kasan_check_range+0x1b2/0x1c1
memcpy+0x22/0x5d
__d_alloc+0x269/0x859
d_alloc+0x45/0x20c
d_alloc_parallel+0xb2/0x8b2
lookup_open+0x3b8/0x9f9
open_last_lookups+0x63d/0xc26
path_openat+0x11a/0x261
do_filp_open+0xcc/0x168
do_sys_openat2+0x13b/0x3f7
do_sys_open+0x10f/0x146
__se_sys_creat+0x27/0x2e
__x64_sys_creat+0x55/0x6a
do_syscall_64+0x40/0x96
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Allocated by task 952:
kasan_save_stack+0x1f/0x42
kasan_set_track+0x21/0x2a
kasan_save_alloc_info+0x17/0x1d
__kasan_kmalloc+0x7e/0x87
__kmalloc_node_track_caller+0x59/0x155
kstrndup+0x60/0xe6
parse_mf_symlink+0x215/0x30b
check_mf_symlink+0x260/0x36a
cifs_get_inode_info+0x14e1/0x1690
cifs_revalidate_dentry_attr+0x70d/0x964
cifs_revalidate_dentry+0x36/0x62
cifs_d_revalidate+0x162/0x446
lookup_open+0x36f/0x9f9
open_last_lookups+0x63d/0xc26
path_openat+0x11a/0x261
do_filp_open+0xcc/0x168
do_sys_openat2+0x13b/0x3f7
do_sys_open+0x10f/0x146
__se_sys_creat+0x27/0x2e
__x64_sys_creat+0x55/0x6a
do_syscall_64+0x40/0x96
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 950:
kasan_save_stack+0x1f/0x42
kasan_set_track+0x21/0x2a
kasan_save_free_info+0x1c/0x34
____kasan_slab_free+0x1c1/0x1d5
__kasan_slab_free+0xe/0x13
__kmem_cache_free+0x29a/0x387
kfree+0xd3/0x10e
cifs_fattr_to_inode+0xb6a/0xc8c
cifs_get_inode_info+0x3cb/0x1690
cifs_revalidate_dentry_attr+0x70d/0x964
cifs_revalidate_dentry+0x36/0x62
cifs_d_revalidate+0x162/0x446
lookup_open+0x36f/0x9f9
open_last_lookups+0x63d/0xc26
path_openat+0x11a/0x261
do_filp_open+0xcc/0x168
do_sys_openat2+0x13b/0x3f7
do_sys_open+0x10f/0x146
__se_sys_creat+0x27/0x2e
__x64_sys_creat+0x55/0x6a
do_syscall_64+0x40/0x96
entry_SYSCALL_64_after_hwframe+0x63/0xcd
When opened a symlink, link name is from 'inode->i_link', but it may be
reset to a new value when revalidate the dentry. If some processes get the
link name on the race scenario, then UAF will happen on link name.
Fix this by implementing 'get_link' interface to duplicate the link name.
Fixes: 76894f3e2f ("cifs: improve symlink handling for smb2+")
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
In a few places, we do unnecessary iterations of
tcp sessions, even when the server struct is provided.
The change avoids it and uses the server struct provided.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb sessions and tcons currently hang off primary channel only.
Secondary channels have the lists as empty. Whenever there's a
need to iterate sessions or tcons, we should use the list in the
corresponding primary channel.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Pull arm64 fixes from Catalin Marinas:
- Avoid kprobe recursion when cortex_a76_erratum_1463225_debug_handler()
is not inlined (change to __always_inline).
- Fix the visibility of compat hwcaps, broken by recent changes to
consolidate the visibility of hwcaps and the user-space view of the
ID registers.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: cpufeature: Fix the visibility of compat hwcaps
arm64: entry: avoid kprobe recursion
Pull i2c fixes from Wolfram Sang:
"A documentation fix and driver fixes for piix4, tegra, and i801"
* tag 'i2c-for-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
Documentation: devres: add missing I2C helper
i2c: i801: add lis3lv02d's I2C address for Vostro 5568
i2c: tegra: Allocate DMA memory for DMA engine
i2c: piix4: Fix adapter not be removed in piix4_remove()
When the mac device gets removed, it leaves behind the ethernet device.
This will result in a segfault next time the ethernet device accesses
mac_dev. Remove the ethernet device when we get removed to prevent
this. This is not completely reversible, since some resources aren't
cleaned up properly, but that can be addressed later.
Fixes: 3933961682 ("fsl/fman: Add FMan MAC driver")
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Link: https://lore.kernel.org/r/20221103182831.2248833-1-sean.anderson@seco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the bnxt_en driver ndo_rx_flow_steer returns '0' whenever an entry
that we are attempting to steer is already found. This is not the
correct behavior. The return code should be the value/index that
corresponds to the entry. Returning zero all the time causes the
RFS records to be incorrect unless entry '0' is the correct one. As
flows migrate to different cores this can create entries that are not
correct.
Fixes: c0c050c58d ("bnxt_en: New Broadcom ethernet driver.")
Reported-by: Akshay Navgire <anavgire@purestorage.com>
Signed-off-by: Alex Barba <alex.barba@broadcom.com>
Signed-off-by: Andy Gospodarek <gospo@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix the sequence required for PCIE-AER. While slot reset occurs, firmware
might not be ready and the driver needs to check for its recovery. We
also need to remap the health registers for some chips and clear the
resource reservations. The resources will be allocated again during
bnxt_io_resume().
Fixes: fb1e6e562b ("bnxt_en: Fix AER recovery.")
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce bnxt_clear_reservations() to clear the reserved attributes only.
This will be used in the next patch to fix PCI AER handling.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 54cc3dbfc1.
Zev Weiss reports that the reverted patch may cause a regulator
undercount. Here is his report:
... having regulator-dummy set as a supply on my PMBus regulators
(instead of having them as their own top-level regulators without
an upstream supply) leads to enable-count underflow errors when
disabling them:
# echo 0 > /sys/bus/platform/devices/efuse01/state
[ 906.094477] regulator-dummy: Underflow of regulator enable count
[ 906.100563] Failed to disable vout: -EINVAL
[ 136.992676] reg-userspace-consumer efuse01: Failed to configure state: -22
Zev reports that reverting the patch fixes the problem. So let's do that
for now.
Fixes: 54cc3dbfc1 ("hwmon: (pmbus) Add regulator supply into macro")
Cc: Marcello Sylvester Bauer <sylv@sylv.io>
Reported-by: Zev Weiss <zev@bewilderbeest.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Available sensors are enumerated and reported by the SCMI platform server
using a 16bit identification number; not all such sensors are of a type
supported by hwmon subsystem and, among the supported ones, only a subset
could be temperature sensors that have to be registered with the Thermal
Framework.
Potential clashes between hwmon channels indexes and the underlying real
sensors IDs do not play well with the hwmon<-->thermal bridge automatic
registration routines and could need a sensible number of fake dummy
sensors to be made up in order to keep indexes and IDs in sync.
Avoid to use the hwmon<-->thermal bridge dropping the HWMON_C_REGISTER_TZ
attribute and instead explicit register temperature sensors directly with
the Thermal Framework.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20221031114018.59048-1-cristian.marussi@arm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
At region creation time the next region-id is atomically cached so that
there is predictability of region device names. If that region is
destroyed and then a new one is created the region id increments. That
ends up looking like a memory leak, or is otherwise surprising that
identifiers roll forward even after destroying all previously created
regions.
Try to reuse rather than free old region ids at region release time.
While this fixes a cosmetic issue, the needlessly advancing memory
region-id gives the appearance of a memory leak, hence the "Fixes" tag,
but no "Cc: stable" tag.
Cc: Ben Widawsky <bwidawsk@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes: 779dd20cfb ("cxl/region: Add region creation support")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752186062.947915.13200195701224993317.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When programming port decode targets, the algorithm wants to ensure that
two devices are compatible to be programmed as peers beneath a given
port. A compatible peer is a target that shares the same dport, and
where that target's interleave position also routes it to the same
dport. Compatibility is determined by the device's interleave position
being >= to distance. For example, if a given dport can only map every
Nth position then positions less than N away from the last target
programmed are incompatible.
The @distance for the host-bridge's cxl_port in a simple dual-ported
host-bridge configuration with 2 direct-attached devices is 1, i.e. An
x2 region divided by 2 dports to reach 2 region targets.
An x4 region under an x2 host-bridge would need 2 intervening switches
where the @distance at the host bridge level is 2 (x4 region divided by
2 switches to reach 4 devices).
However, the distance between peers underneath a single ported
host-bridge is always zero because there is no limit to the number of
devices that can be mapped. In other words, there are no decoders to
program in a passthrough, all descendants are mapped and distance only
starts matters for the intervening descendant ports of the passthrough
port.
Add tracking for the number of dports mapped to a port, and use that to
detect the passthrough case for calculating @distance.
Cc: <stable@vger.kernel.org>
Reported-by: Bobo WL <lmw.bobo@gmail.com>
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: http://lore.kernel.org/r/20221010172057.00001559@huawei.com
Fixes: 27b3f8d138 ("cxl/region: Program target lists")
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/166752185440.947915.6617495912508299445.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Some regions may not have any address space allocated. Skip them when
validating HPA order otherwise a crash like the following may result:
devm_cxl_add_region: cxl_acpi cxl_acpi.0: decoder3.4: created region9
BUG: kernel NULL pointer dereference, address: 0000000000000000
[..]
RIP: 0010:store_targetN+0x655/0x1740 [cxl_core]
[..]
Call Trace:
<TASK>
kernfs_fop_write_iter+0x144/0x200
vfs_write+0x24a/0x4d0
ksys_write+0x69/0xf0
do_syscall_64+0x3a/0x90
store_targetN+0x655/0x1740:
alloc_region_ref at drivers/cxl/core/region.c:676
(inlined by) cxl_port_attach_region at drivers/cxl/core/region.c:850
(inlined by) cxl_region_attach at drivers/cxl/core/region.c:1290
(inlined by) attach_target at drivers/cxl/core/region.c:1410
(inlined by) store_targetN at drivers/cxl/core/region.c:1453
Cc: <stable@vger.kernel.org>
Fixes: 384e624bb2 ("cxl/region: Attach endpoint decoders")
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/166752182461.947915.497032805239915067.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull xfs fixes from Darrick Wong:
"Dave and I had thought that this would be a very quiet cycle, but we
thought wrong.
At first there were the usual trickle of minor bugfixes, but then
Zorro pulled -rc1 and noticed complaints about the stronger memcpy
checks w.r.t. flex arrays.
Analyzing how to fix that revealed a bunch of validation gaps in
validating ondisk log items during recovery, and then a customer hit
an infinite loop in the refcounting code on a corrupt filesystem.
So. This largeish batch of fixes addresses all those problems, I hope.
Summary:
- Fix a UAF bug during log recovery
- Fix memory leaks when mount fails
- Detect corrupt bestfree information in a directory block
- Fix incorrect return value type for the dax page fault handlers
- Fix fortify complaints about memcpy of xfs log item objects
- Strengthen inadequate validation of recovered log items
- Fix incorrectly declared flex array in EFI log item structs
- Log corrupt log items for debugging purposes
- Fix infinite loop problems in the refcount code if the refcount
btree node block keys are corrupt
- Fix infinite loop problems in the refcount code if the refcount
btree records suffer MSB bitflips
- Add more sanity checking to continued defer ops to prevent
overflows from one AG to the next or off EOFS"
* tag 'xfs-6.1-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (28 commits)
xfs: rename XFS_REFC_COW_START to _COWFLAG
xfs: fix uninitialized list head in struct xfs_refcount_recovery
xfs: fix agblocks check in the cow leftover recovery function
xfs: check record domain when accessing refcount records
xfs: remove XFS_FIND_RCEXT_SHARED and _COW
xfs: refactor domain and refcount checking
xfs: report refcount domain in tracepoints
xfs: track cow/shared record domains explicitly in xfs_refcount_irec
xfs: refactor refcount record usage in xchk_refcountbt_rec
xfs: dump corrupt recovered log intent items to dmesg consistently
xfs: move _irec structs to xfs_types.h
xfs: actually abort log recovery on corrupt intent-done log items
xfs: check deferred refcount op continuation parameters
xfs: refactor all the EFI/EFD log item sizeof logic
xfs: create a predicate to verify per-AG extents
xfs: fix memcpy fortify errors in EFI log format copying
xfs: make sure aglen never goes negative in xfs_refcount_adjust_extents
xfs: fix memcpy fortify errors in RUI log format copying
xfs: fix memcpy fortify errors in CUI log format copying
xfs: fix memcpy fortify errors in BUI log format copying
...
Pull landlock fix from Mickaël Salaün:
"Fix the test build for some distros"
* tag 'landlock-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Build without static libraries
Pull hardening fix from Kees Cook:
- Correctly report struct member size on memcpy overflow (Kees Cook)
* tag 'hardening-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
fortify: Capture __bos() results in const temp vars
Pull EFI fixes from Ard Biesheuvel:
- A pair of tweaks to the EFI random seed code so that externally
provided version of this config table are handled more robustly
- Another fix for the v6.0 EFI variable refactor that turned out to
break Apple machines which don't provide QueryVariableInfo()
- Add some guard rails to the EFI runtime service call wrapper so we
can recover from synchronous exceptions caused by firmware
* tag 'efi-fixes-for-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
arm64: efi: Recover from synchronous exceptions occurring in firmware
efi: efivars: Fix variable writes with unsupported query_variable_store()
efi: random: Use 'ACPI reclaim' memory for random seed
efi: random: reduce seed size to 32 bytes
efi/tpm: Pass correct address to memblock_reserve
Pull ARM SoC fixes from Arnd Bergmann:
"There are not a lot of important fixes for the soc tree yet this time,
but it's time to upstream what I got so far:
- DT Fixes for Arm Juno and ST-Ericsson Ux500 to add missing critical
temperature points
- A number of fixes for the Arm SCMI firmware, addressing correctness
issues in the code, in particular error handling and resource
leaks.
- One error handling fix for the new i.MX93 power domain driver
- Several devicetree fixes for NXP i.MX6/8/9 and Layerscape chips,
fixing incorrect or missing DT properties for MDIO controller
nodes, CPLD, USB and regulators for various boards, as well as some
fixes for DT schema checks.
- MAINTAINERS file updates for HiSilicon LPC Bus and Broadcom git
URLs"
* tag 'soc-fixes-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (26 commits)
arm64: dts: juno: Add thermal critical trip points
firmware: arm_scmi: Fix deferred_tx_wq release on error paths
firmware: arm_scmi: Fix devres allocation device in virtio transport
firmware: arm_scmi: Make Rx chan_setup fail on memory errors
firmware: arm_scmi: Make tx_prepare time out eventually
firmware: arm_scmi: Suppress the driver's bind attributes
firmware: arm_scmi: Cleanup the core driver removal callback
MAINTAINERS: Update HiSilicon LPC BUS Driver maintainer
ARM: dts: ux500: Add trips to battery thermal zones
arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers
arm64: dts: ls1088a: specify clock frequencies for the MDIO controllers
arm64: dts: lx2160a: specify clock frequencies for the MDIO controllers
soc: imx: imx93-pd: Fix the error handling path of imx93_pd_probe()
arm64: dts: imx93: correct gpio-ranges
arm64: dts: imx93: correct s4mu interrupt names
dt-bindings: power: gpcv2: add power-domains property
arm64: dts: imx8: correct clock order
ARM: dts: imx6dl-yapp4: Do not allow PM to switch PU regulator off on Q/QP
ARM: dts: imx6qdl-gw59{10,13}: fix user pushbutton GPIO offset
arm64: dts: imx8mn: Correct the usb power domain
...
Pull drm fixes from Dave Airlie:
"This is the weekly fixes for rc4. Misc fixes across rockchip, imx,
amdgpu and i915.
The biggest change is for amdkfd where the trap handler needs an
updated fw from a header which makes it a bit larger. I hadn't noticed
this particular file before so I'm going to figure out what the magic
is for, but the fix should be fine for now.
amdgpu:
- DCN 3.1.4 fixes
- DCN 3.2.x fixes
- GC 11.x fixes
- Virtual display fix
- Fail suspend if resources can't be evicted
- SR-IOV fix
- Display PSR fix
amdkfd:
- Fix possible NULL pointer deref
- GC 11.x trap handler fix
i915:
- Add locking around DKL PHY register accesses
- Stop abusing swiotlb_max_segment
- Filter out invalid outputs more sensibly
- Setup DDC fully before output init
- Simplify intel_panel_add_edid_alt_fixed_modes()
- Grab mode_config.mutex during LVDS init to avoid WARNs
rockchip:
- fix probing issues
- fix framebuffer without iommu
- fix vop selection
- fix NULL ptr access
imx:
- Fix Kconfig
- fix mode_valid function"
* tag 'drm-fixes-2022-11-04-1' of git://anongit.freedesktop.org/drm/drm: (35 commits)
drm/amdkfd: update GFX11 CWSR trap handler
drm/amd/display: Investigate tool reported FCLK P-state deviations
drm/amd/display: Add DSC delay factor workaround
drm/amd/display: Round up DST_after_scaler to nearest int
drm/amd/display: Use forced DSC bpp in DML
drm/amd/display: Fix DCN32 DSC delay calculation
drm/amdgpu: Disable GPU reset on SRIOV before remove pci.
drm/amdgpu: disable GFXOFF during compute for GFX11
drm/amd: Fail the suspend if resources can't be evicted
drm/amdkfd: Fix NULL pointer dereference in svm_migrate_to_ram()
drm/amdgpu: correct MES debugfs versions
drm/amdgpu: set fb_modifiers_not_supported in vkms
drm/amd/display: cursor update command incomplete
drm/amd/display: Enable timing sync on DCN32
drm/amd/display: Set memclk levels to be at least 1 for dcn32
drm/amd/display: Update latencies on DCN321
drm/amd/display: Limit dcn32 to 1950Mhz display clock
drm/amd/display: Ignore Cable ID Feature
drm/amd/display: Update DSC capabilitie for DCN314
drm/imx: imx-tve: Fix return type of imx_tve_connector_mode_valid
...
Pull clk fixes from Stephen Boyd:
"Fixes in clk drivers and some clk rate range fixes in the core as
well:
- Make sure the struct clk_rate_request is more sane
- Remove a WARN_ON that was triggering for clks with no parents that
can change frequency
- Fix bad i2c bus transactions on Renesas rs9
- Actually return an error in clk_mt8195_topck_probe() on an error
path
- Keep the GPU memories powered while the clk isn't enabled on
Qualcomm's sc7280 SoC
- Fix the parent clk for HSCIF modules on Renesas' R-Car V4H SoC"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: Update the force mem core bit for GPU clocks
clk: Initialize max_rate in struct clk_rate_request
clk: Initialize the clk_rate_request even if clk_core is NULL
clk: Remove WARN_ON NULL parent in clk_core_init_rate_req()
clk: renesas: r8a779g0: Fix HSCIF parent clocks
clk: renesas: r8a779g0: Add SASYNCPER clocks
clk: mediatek: clk-mt8195-topckgen: Fix error return code in clk_mt8195_topck_probe()
clk: sifive: select by default if SOC_SIFIVE
clk: rs9: Fix I2C accessors
For !CONFIG_TRACING kernels, the kmalloc() implementation tries (in cases where
the allocation size is build-time constant) to save a function call, by
inlining kmalloc_trace() to a kmem_cache_alloc() call.
However since commit 6edf2576a6 ("mm/slub: enable debugging memory wasting of
kmalloc") this path now fails to pass the original request size to be
eventually recorded (for kmalloc caches with debugging enabled).
We could adjust the code to call __kmem_cache_alloc_node() as the
CONFIG_TRACING variant, but that would as a result inline a call with 5
parameters, bloating the kmalloc() call sites. The cost of extra function
call (to kmalloc_trace()) seems like a lesser evil.
It also appears that the !CONFIG_TRACING variant is incompatible with upcoming
hardening efforts [1] so it's easier if we just remove it now. Kernels with no
tracing are rare these days and the benefit is dubious anyway.
[1] https://lore.kernel.org/linux-mm/20221101222520.never.109-kees@kernel.org/T/#m20ecf14390e406247bde0ea9cce368f469c539ed
Link: https://lore.kernel.org/all/097d8fba-bd10-a312-24a3-a4068c4f424c@suse.cz/
Suggested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
In scenarios where multiple errors have occurred
for a SQ before SW starts handling error interrupt,
SQ_CTX[OP_INT] may get overwritten leading to
NIX_LF_SQ_OP_INT returning incorrect value.
To workaround this read LMT, MNQ and SQ individual
error status registers to determine the cause of error.
Fixes: 4ff7d1488a ("octeontx2-pf: Error handling support")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Reviewed-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca says:
====================
macsec: offload-related fixes
I'm working on a dummy offload for macsec on netdevsim. It just has a
small SecY and RXSC table so I can trigger failures easily on the
ndo_* side. It has exposed a couple of issues.
The first patch is a revert of commit c850240b6c ("net: macsec:
report real_dev features when HW offloading is enabled"). That commit
tried to improve the performance of macsec offload by taking advantage
of some of the NIC's features, but in doing so, broke macsec offload
when the lower device supports both macsec and ipsec offload, as the
ipsec offload feature flags were copied from the real device. Since
the macsec device doesn't provide xdo_* ops, the XFRM core rejects the
registration of the new macsec device in xfrm_api_check.
I'm working on re-adding those feature flags when offload is
available, but I haven't fully solved that yet. I think it would be
safer to do that second part in net-next considering how complex
feature interactions tend to be.
v2:
- better describe the issue introduced by commit c850240b6c (Leon
Romanovsky)
- patch #3: drop unnecessary !! (Leon Romanovsky)
v3:
- patch #3: drop extra newline (Jakub Kicinski)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
macsec_add_rxsa and macsec_add_txsa copy the key to an on-stack
offloading context to pass it to the drivers, but leaves it there when
it's done. Clear it with memzero_explicit as soon as it's not needed
anymore.
Fixes: 3cf3227a21 ("net: macsec: hardware offloading infrastructure")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
macsec_is_configured incorrectly uses secy->n_rx_sc to check if some
RXSCs exist. secy->n_rx_sc only counts the number of active RXSCs, but
there can also be inactive SCs as well, which may be stored in the
driver (in case we're disabling offloading), or would have to be
pushed to the device (in case we're trying to enable offloading).
As long as RXSCs active on creation and never turned off, the issue is
not visible.
Fixes: dcb780fb27 ("net: macsec: add nla support for changing the offloading selection")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
secy->n_rx_sc is supposed to be the number of _active_ rxsc's within a
secy. This is then used by macsec_send_sci to help decide if we should
add the SCI to the header or not.
This logic is currently broken when we create a new RXSC and turn it
off at creation, as create_rx_sc always sets ->active to true (and
immediately uses that to increment n_rx_sc), and only later
macsec_add_rxsc sets rx_sc->active.
Fixes: c09440f7dc ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently we get an inconsistent state:
- netlink returns the error to userspace
- the RXSC is installed but not offloaded
Then the device could get confused when we try to add an RXSA, because
the RXSC isn't supposed to exist.
Fixes: 3cf3227a21 ("net: macsec: hardware offloading infrastructure")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit c850240b6c.
That commit tried to improve the performance of macsec offload by
taking advantage of some of the NIC's features, but in doing so, broke
macsec offload when the lower device supports both macsec and ipsec
offload, as the ipsec offload feature flags (mainly NETIF_F_HW_ESP)
were copied from the real device. Since the macsec device doesn't
provide xdo_* ops, the XFRM core rejects the registration of the new
macsec device in xfrm_api_check.
Example perf trace when running
ip link add link eni1np1 type macsec port 4 offload mac
ip 737 [003] 795.477676: probe:xfrm_dev_event__REGISTER name="macsec0" features=0x1c000080014869
xfrm_dev_event+0x3a
notifier_call_chain+0x47
register_netdevice+0x846
macsec_newlink+0x25a
ip 737 [003] 795.477687: probe:xfrm_dev_event__return ret=0x8002 (NOTIFY_BAD)
notifier_call_chain+0x47
register_netdevice+0x846
macsec_newlink+0x25a
dev->features includes NETIF_F_HW_ESP (0x04000000000000), so
xfrm_api_check returns NOTIFY_BAD because we don't have
dev->xfrmdev_ops on the macsec device.
We could probably propagate GSO and a few other features from the
lower device, similar to macvlan. This will be done in a future patch.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In some conditions, background processes in udpgro don't have enough
time to set up the sockets. When foreground processes start, this
results in the test failing with "./udpgso_bench_tx: sendmsg: Connection
refused". For instance, this happens from time to time on a Qualcomm
SA8540P SoC running CentOS Stream 9.
To fix this, increase the time given to background processes to
complete the startup before foreground processes start.
Signed-off-by: Adrien Thierry <athierry@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As the argument struct hnae3_handle *h of function hclge_get_dscp_prio()
can be other client registered in hnae3 layer, we need to transform it
into hnae3_handle of local nic client to get right dscp settings for
other clients.
Fixes: dfea275e06 ("net: hns3: optimize converting dscp to priority process of hns3_nic_select_queue()")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix build errors when MACSEC=m and OCTEONTX2_PF=y by having
OCTEONTX2_PF depend on MACSEC if it is enabled. By adding
"|| !MACSEC", this means that MACSEC is not required -- it can
be disabled for this driver.
drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_remove':
../drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c:(.text+0x2fd0): undefined reference to `cn10k_mcs_free'
mips64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.o: in function `otx2_mbox_up_handler_mcs_intr_notify':
../drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c:(.text+0x4610): undefined reference to `cn10k_handle_mcs_event'
Reported-by: kernel test robot <lkp@intel.com>
Fixes: c54ffc7360 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Subbaraya Sundeep <sbhatta@marvell.com>
Cc: Sunil Goutham <sgoutham@marvell.com>
Cc: Geetha sowjanya <gakula@marvell.com>
Cc: hariprasad <hkelam@marvell.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When support was added for devices using an explicit 3rd barrel switch,
the logic used by devices emulating this feature was broken. The 'if'
statement / block that was introduced only handles the case where the
button is pressed (i.e. 'barrelswitch' and 'barrelswitch2' are both set)
but not the case where it is released (i.e. one or both being cleared).
This results in a BTN_STYLUS3 "down" event being sent when the button
is pressed, but no "up" event ever being sent afterwards.
This patch restores the previously-used logic for determining button
states in the emulated case so that switches are reported correctly
again.
Link: https://github.com/linuxwacom/xf86-input-wacom/issues/292
Fixes: 6d09085b38 ("HID: wacom: Adding Support for new usages")
CC: stable@vger.kernel.org #v5.19+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Joshua Dickens <joshua.dickens@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Kalle Valo says:
====================
wireless fixes for v6.1
Second set of fixes for v6.1. Some fixes to char type usage in
drivers, memory leaks in the stack and also functionality fixes. The
rt2x00 char type fix is a larger (but still simple) commit, otherwise
the fixes are small in size.
* tag 'wireless-2022-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: ath11k: avoid deadlock during regulatory update in ath11k_regd_update()
wifi: ath11k: Fix QCN9074 firmware boot on x86
wifi: mac80211: Set TWT Information Frame Disabled bit as 1
wifi: mac80211: Fix ack frame idr leak when mesh has no route
wifi: mac80211: fix general-protection-fault in ieee80211_subif_start_xmit()
wifi: brcmfmac: Fix potential buffer overflow in brcmf_fweh_event_worker()
wifi: airo: do not assign -1 to unsigned char
wifi: mac80211_hwsim: fix debugfs attribute ps with rc table support
wifi: cfg80211: Fix bitrates overflow issue
wifi: cfg80211: fix memory leak in query_regdb_file()
wifi: mac80211: fix memory free error when registering wiphy fail
wifi: cfg80211: silence a sparse RCU warning
wifi: rt2x00: use explicitly signed or unsigned types
====================
Link: https://lore.kernel.org/r/20221103125315.04E57C433C1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit 3dcbdb134f ("net: gso: Fix skb_segment splat when
splitting gso_size mangled skb having linear-headed frag_list"), it is
allowed to change gso_size of a GRO packet. However, that commit assumes
that "checking the first list_skb member suffices; i.e if either of the
list_skb members have non head_frag head, then the first one has too".
It turns out this assumption does not hold. We've seen BUG_ON being hit
in skb_segment when skbs on the frag_list had differing head_frag with
the vmxnet3 driver. This happens because __netdev_alloc_skb and
__napi_alloc_skb can return a skb that is page backed or kmalloced
depending on the requested size. As the result, the last small skb in
the GRO packet can be kmalloced.
There are three different locations where this can be fixed:
(1) We could check head_frag in GRO and not allow GROing skbs with
different head_frag. However, that would lead to performance
regression on normal forward paths with unmodified gso_size, where
!head_frag in the last packet is not a problem.
(2) Set a flag in bpf_skb_net_grow and bpf_skb_net_shrink indicating
that NETIF_F_SG is undesirable. That would need to eat a bit in
sk_buff. Furthermore, that flag can be unset when all skbs on the
frag_list are page backed. To retain good performance,
bpf_skb_net_grow/shrink would have to walk the frag_list.
(3) Walk the frag_list in skb_segment when determining whether
NETIF_F_SG should be cleared. This of course slows things down.
This patch implements (3). To limit the performance impact in
skb_segment, the list is walked only for skbs with SKB_GSO_DODGY set
that have gso_size changed. Normal paths thus will not hit it.
We could check only the last skb but since we need to walk the whole
list anyway, let's stay on the safe side.
Fixes: 3dcbdb134f ("net: gso: Fix skb_segment splat when splitting gso_size mangled skb having linear-headed frag_list")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/e04426a6a91baf4d1081e1b478c82b5de25fdf21.1667407944.git.jbenc@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
bpf 2022-11-04
We've added 8 non-merge commits during the last 3 day(s) which contain
a total of 10 files changed, 113 insertions(+), 16 deletions(-).
The main changes are:
1) Fix memory leak upon allocation failure in BPF verifier's stack state
tracking, from Kees Cook.
2) Fix address leakage when BPF progs release reference to an object,
from Youlin Li.
3) Fix BPF CI breakage from buggy in.h uapi header dependency,
from Andrii Nakryiko.
4) Fix bpftool pin sub-command's argument parsing, from Pu Lehui.
5) Fix BPF sockmap lockdep warning by cancelling psock work outside
of socket lock, from Cong Wang.
6) Follow-up for BPF sockmap to fix sk_forward_alloc accounting,
from Wang Yufen.
bpf-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add verifier test for release_reference()
bpf: Fix wrong reg type conversion in release_reference()
bpf, sock_map: Move cancel_work_sync() out of sock lock
tools/headers: Pull in stddef.h to uapi to fix BPF selftests build in CI
net/ipv4: Fix linux/in.h header dependencies
bpftool: Fix NULL pointer dereference when pin {PROG, MAP, LINK} without FILE
bpf, sockmap: Fix the sk->sk_forward_alloc warning of sk_stream_kill_queues
bpf, verifier: Fix memory leak in array reallocation for stack state
====================
Link: https://lore.kernel.org/r/20221104000445.30761-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since commit ab51e15d53 ("fprobe: Introduce FPROBE_FL_KPROBE_SHARED flag
for fprobe") introduced fprobe_kprobe_handler() for fprobe::ops::func,
unregister_fprobe() fails to unregister the registered if user specifies
FPROBE_FL_KPROBE_SHARED flag.
Moreover, __register_ftrace_function() is possible to change the
ftrace_ops::func, thus we have to check fprobe::ops::saved_func instead.
To check it correctly, it should confirm the fprobe::ops::saved_func is
either fprobe_handler() or fprobe_kprobe_handler().
Link: https://lore.kernel.org/all/166677683946.1459107.15997653945538644683.stgit@devnote3/
Fixes: cad9931f64 ("fprobe: Add ftrace based probe APIs")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Pull ata fixes from Damien Le Moal:
"Two driver fixes:
- Fix the PIO mode configuration of the pdc20230 (pata_legacy)
driver. This also removes a compilation warning with clang and W=1
(Sergey)
- Fix devm_platform_ioremap_resource() return value check in the
palmld driver (Yang)"
* tag 'ata-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: palmld: fix return value check in palmld_pata_probe()
ata: pata_legacy: fix pdc20230_set_piomode()
Add a test case to ensure that released pointer registers will not be
leaked into the map.
Before fix:
./test_verifier 984
984/u reference tracking: try to leak released ptr reg FAIL
Unexpected success to load!
verification time 67 usec
stack depth 4
processed 23 insns (limit 1000000) max_states_per_insn 0 total_states 2
peak_states 2 mark_read 1
984/p reference tracking: try to leak released ptr reg OK
Summary: 1 PASSED, 0 SKIPPED, 1 FAILED
After fix:
./test_verifier 984
984/u reference tracking: try to leak released ptr reg OK
984/p reference tracking: try to leak released ptr reg OK
Summary: 2 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Youlin Li <liulin063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221103093440.3161-2-liulin063@gmail.com
Some helper functions will allocate memory. To avoid memory leaks, the
verifier requires the eBPF program to release these memories by calling
the corresponding helper functions.
When a resource is released, all pointer registers corresponding to the
resource should be invalidated. The verifier use release_references() to
do this job, by apply __mark_reg_unknown() to each relevant register.
It will give these registers the type of SCALAR_VALUE. A register that
will contain a pointer value at runtime, but of type SCALAR_VALUE, which
may allow the unprivileged user to get a kernel pointer by storing this
register into a map.
Using __mark_reg_not_init() while NOT allow_ptr_leaks can mitigate this
problem.
Fixes: fd978bf7fd ("bpf: Add reference tracking to verifier")
Signed-off-by: Youlin Li <liulin063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20221103093440.3161-1-liulin063@gmail.com
Pull fuse fixes from Miklos Szeredi:
"Fix two rarely triggered but long-standing issues"
* tag 'fuse-fixes-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: add file_modified() to fallocate
fuse: fix readdir cache race
Pull btrfs fixes from David Sterba:
"A batch of error handling fixes for resource leaks, fixes for nowait
mode in combination with direct and buffered IO:
- direct IO + dsync + nowait could miss a sync of the file after
write, add handling for this combination
- buffered IO + nowait should not fail with ENOSPC, only blocking IO
could determine that
- error handling fixes:
- fix inode reserve space leak due to nowait buffered write
- check the correct variable after allocation (direct IO submit)
- fix inode list leak during backref walking
- fix ulist freeing in self tests"
* tag 'for-6.1-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix inode reserve space leak due to nowait buffered write
btrfs: fix nowait buffered write returning -ENOSPC
btrfs: remove pointless and double ulist frees in error paths of qgroup tests
btrfs: fix ulist leaks in error paths of qgroup self tests
btrfs: fix inode list leak during backref walking at find_parent_nodes()
btrfs: fix inode list leak during backref walking at resolve_indirect_refs()
btrfs: fix lost file sync on direct IO write with nowait and dsync iocb
btrfs: fix a memory allocation failure test in btrfs_submit_direct
Commit 237405ebef ("arm64: cpufeature: Force HWCAP to be based on the
sysreg visible to user-space") forced the hwcaps to use sanitised
user-space view of the id registers. However, the ID register structures
used to select few compat cpufeatures (vfp, crc32, ...) are masked and
hence such hwcaps do not appear in /proc/cpuinfo anymore for PER_LINUX32
personality.
Add the ID register structures explicitly and set the relevant entry as
visible. As these ID registers are now of type visible so make them
available in 64-bit userspace by making necessary changes in register
emulation logic and documentation.
While at it, update the comment for structure ftr_generic_32bits[] which
lists the ID register that use it.
Fixes: 237405ebef ("arm64: cpufeature: Force HWCAP to be based on the sysreg visible to user-space")
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@arm.com>
Link: https://lore.kernel.org/r/20221103082232.19189-1-amit.kachhap@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Pull Kselftest fixes from Shuah Khan:
"Fixes to the pidfd test"
* tag 'linux-kselftest-fixes-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/pidfd_test: Remove the erroneous ','
selftests: pidfd: Fix compling warnings
ksefltests: pidfd: Fix wait_states: Test terminated by timeout
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and netfilter.
Current release - regressions:
- net: several zerocopy flags fixes
- netfilter: fix possible memory leak in nf_nat_init()
- openvswitch: add missing .resv_start_op
Previous releases - regressions:
- neigh: fix null-ptr-deref in neigh_table_clear()
- sched: fix use after free in red_enqueue()
- dsa: fall back to default tagger if we can't load the one from DT
- bluetooth: fix use-after-free in l2cap_conn_del()
Previous releases - always broken:
- netfilter: netlink notifier might race to release objects
- nfc: fix potential memory leak of skb
- bluetooth: fix use-after-free caused by l2cap_reassemble_sdu
- bluetooth: use skb_put to set length
- eth: tun: fix bugs for oversize packet when napi frags enabled
- eth: lan966x: fixes for when MTU is changed
- eth: dwmac-loongson: fix invalid mdio_node"
* tag 'net-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
vsock: fix possible infinite sleep in vsock_connectible_wait_data()
vsock: remove the unused 'wait' in vsock_connectible_recvmsg()
ipv6: fix WARNING in ip6_route_net_exit_late()
bridge: Fix flushing of dynamic FDB entries
net, neigh: Fix null-ptr-deref in neigh_table_clear()
net/smc: Fix possible leaked pernet namespace in smc_init()
stmmac: dwmac-loongson: fix invalid mdio_node
ibmvnic: Free rwi on reset success
net: mdio: fix undefined behavior in bit shift for __mdiobus_register
Bluetooth: L2CAP: Fix attempting to access uninitialized memory
Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm
Bluetooth: L2CAP: Fix accepting connection request for invalid SPSM
Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnect
Bluetooth: L2CAP: Fix memory leak in vhci_write
Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del()
Bluetooth: virtio_bt: Use skb_put to set length
Bluetooth: hci_conn: Fix CIS connection dst_type handling
Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu
netfilter: ipset: enforce documented limit to prevent allocating huge memory
isdn: mISDN: netjet: fix wrong check of device registration
...
Pull powerpc fixes from Michael Ellerman:
- Fix an endian thinko in the asm-generic compat_arg_u64() which led to
syscall arguments being swapped for some compat syscalls.
- Fix syscall wrapper handling of syscalls with 64-bit arguments on
32-bit kernels, which led to syscall arguments being misplaced.
- A build fix for amdgpu on Book3E with AltiVec disabled.
Thanks to Andreas Schwab, Christian Zigotzky, and Arnd Bergmann.
* tag 'powerpc-6.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/32: Select ARCH_SPLIT_ARG64
powerpc/32: fix syscall wrappers with 64-bit arguments
asm-generic: compat: fix compat_arg_u64() and compat_arg_u64_dual()
powerpc/64e: Fix amdgpu build on Book3E w/o AltiVec
Commit 445d41d7a7 ("Merge branch 'slab/for-6.1/kmalloc_size_roundup' into
slab/for-next") resolved a conflict of two concurrent changes to __ksize().
However, it did not adjust the kernel-doc comment of __ksize(), while the
name of the argument to __ksize() was renamed.
Hence, ./scripts/ kernel-doc -none mm/slab_common.c warns about it.
Adjust the kernel-doc comment for __ksize() for make W=1 happiness.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Unlike x86, which has machinery to deal with page faults that occur
during the execution of EFI runtime services, arm64 has nothing like
that, and a synchronous exception raised by firmware code brings down
the whole system.
With more EFI based systems appearing that were not built to run Linux
(such as the Windows-on-ARM laptops based on Qualcomm SOCs), as well as
the introduction of PRM (platform specific firmware routines that are
callable just like EFI runtime services), we are more likely to run into
issues of this sort, and it is much more likely that we can identify and
work around such issues if they don't bring down the system entirely.
Since we already use a EFI runtime services call wrapper in assembler,
we can quite easily add some code that captures the execution state at
the point where the call is made, allowing us to revert to this state
and proceed execution if the call triggered a synchronous exception.
Given that the kernel and the firmware don't share any data structures
that could end up in an indeterminate state, we can happily continue
running, as long as we mark the EFI runtime services as unavailable from
that point on.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
hyperv_cleanup resets the hypercall page by setting the MSR to 0. However,
the root partition is not allowed to write to the GPA bits of the MSR.
Instead, it uses the hypercall page provided by the MSR. Similar is the
case with the reference TSC MSR.
Clear only the enable bit instead of zeroing the entire MSR to make
the code valid for root partition too.
Signed-off-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20221027095729.1676394-3-anrayabh@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
kvm_zap_gfn_range() must be called in an SRCU read-critical section, but
there is no SRCU annotation in __kvm_set_or_clear_apicv_inhibit(). This
can lead to the following warning via
kvm_arch_vcpu_ioctl_set_guest_debug() if a Shadow MMU is in use (TDP
MMU disabled or nesting):
[ 1416.659809] =============================
[ 1416.659810] WARNING: suspicious RCU usage
[ 1416.659839] 6.1.0-dbg-DEV #1 Tainted: G S I
[ 1416.659853] -----------------------------
[ 1416.659854] include/linux/kvm_host.h:954 suspicious rcu_dereference_check() usage!
[ 1416.659856]
...
[ 1416.659904] dump_stack_lvl+0x84/0xaa
[ 1416.659910] dump_stack+0x10/0x15
[ 1416.659913] lockdep_rcu_suspicious+0x11e/0x130
[ 1416.659919] kvm_zap_gfn_range+0x226/0x5e0
[ 1416.659926] ? kvm_make_all_cpus_request_except+0x18b/0x1e0
[ 1416.659935] __kvm_set_or_clear_apicv_inhibit+0xcc/0x100
[ 1416.659940] kvm_arch_vcpu_ioctl_set_guest_debug+0x350/0x390
[ 1416.659946] kvm_vcpu_ioctl+0x2fc/0x620
[ 1416.659955] __se_sys_ioctl+0x77/0xc0
[ 1416.659962] __x64_sys_ioctl+0x1d/0x20
[ 1416.659965] do_syscall_64+0x3d/0x80
[ 1416.659969] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Always take the KVM SRCU read lock in __kvm_set_or_clear_apicv_inhibit()
to protect the GFN to memslot translation. The SRCU read lock is not
technically required when no Shadow MMUs are in use, since the TDP MMU
walks the paging structures from the roots and does not need to look up
GFN translations in the memslots, but make the SRCU locking
unconditional for simplicty.
In most cases, the SRCU locking is taken care of in the vCPU run loop,
but when called through other ioctls (such as KVM_SET_GUEST_DEBUG)
there is no srcu_read_lock.
Tested: ran tools/testing/selftests/kvm/x86_64/debug_regs on a DBG
build. This patch causes the suspicious RCU warning to disappear.
Note that the warning is hit in __kvm_zap_rmaps(), so
kvm_memslots_have_rmaps() must return true in order for this to
repro (i.e. the TDP MMU must be off or nesting in use.)
Reported-by: Greg Thelen <gthelen@google.com>
Fixes: 36222b117e ("KVM: x86: don't disable APICv memslot when inhibited")
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20221102205359.1260980-1-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When this driver is used with a driver that uses preallocated spi_transfer
structs. The speed_hz is halved by every run. This results in:
spi_stm32 44004000.spi: SPI transfer setup failed
ads7846 spi0.0: SPI transfer failed: -22
Example when running with DIV_ROUND_UP():
- First run; speed_hz = 1000000, spi->clk_rate 125000000
div 125 -> mbrdiv = 7, cur_speed = 976562
- Second run; speed_hz = 976562
div 128,00007 (roundup to 129) -> mbrdiv = 8, cur_speed = 488281
- Third run; speed_hz = 488281
div 256,000131072067109 (roundup to 257) and then -EINVAL is returned.
Use DIV_ROUND_CLOSEST to allow to round down and allow us to keep the
set speed.
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Link: https://lore.kernel.org/r/20221103080043.3033414-1-sean@geanix.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stanislav reported a lockdep warning, which is caused by the
cancel_work_sync() called inside sock_map_close(), as analyzed
below by Jakub:
psock->work.func = sk_psock_backlog()
ACQUIRE psock->work_mutex
sk_psock_handle_skb()
skb_send_sock()
__skb_send_sock()
sendpage_unlocked()
kernel_sendpage()
sock->ops->sendpage = inet_sendpage()
sk->sk_prot->sendpage = tcp_sendpage()
ACQUIRE sk->sk_lock
tcp_sendpage_locked()
RELEASE sk->sk_lock
RELEASE psock->work_mutex
sock_map_close()
ACQUIRE sk->sk_lock
sk_psock_stop()
sk_psock_clear_state(psock, SK_PSOCK_TX_ENABLED)
cancel_work_sync()
__cancel_work_timer()
__flush_work()
// wait for psock->work to finish
RELEASE sk->sk_lock
We can move the cancel_work_sync() out of the sock lock protection,
but still before saved_close() was called.
Fixes: 799aa7f98d ("skmsg: Avoid lock_sock() in sk_psock_backlog()")
Reported-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20221102043417.279409-1-xiyou.wangcong@gmail.com
With recent sync of linux/in.h tools/include headers are now relying on
__DECLARE_FLEX_ARRAY macro, which isn't itself defined inside
tools/include headers anywhere and is instead assumed to be present in
system-wide UAPI header. This breaks isolated environments that don't
have kernel UAPI headers installed system-wide, like BPF CI ([0]).
To fix this, bring in include/uapi/linux/stddef.h into tools/include.
We can't just copy/paste it, though, it has to be processed with
scripts/headers_install.sh, which has a dependency on scripts/unifdef.
So the full command to (re-)generate stddef.h for inclusion into
tools/include directory is:
$ make scripts_unifdef && \
cp $KBUILD_OUTPUT/scripts/unifdef scripts/ && \
scripts/headers_install.sh include/uapi/linux/stddef.h tools/include/uapi/linux/stddef.h
This assumes KBUILD_OUTPUT envvar is set and used for out-of-tree builds.
[0] https://github.com/kernel-patches/bpf/actions/runs/3379432493/jobs/5610982609
Fixes: 036b8f5b89 ("tools headers uapi: Update linux/in.h copy")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/bpf/20221102182517.2675301-2-andrii@kernel.org
__DECLARE_FLEX_ARRAY is defined in include/uapi/linux/stddef.h but
doesn't seem to be explicitly included from include/uapi/linux/in.h,
which breaks BPF selftests builds (once we sync linux/stddef.h into
tools/include directory in the next patch). Fix this by explicitly
including linux/stddef.h.
Given this affects BPF CI and bpf tree, targeting this for bpf tree.
Fixes: 5854a09b49 ("net/ipv4: Use __DECLARE_FLEX_ARRAY() helper")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/20221102182517.2675301-1-andrii@kernel.org
Dexuan Cui says:
====================
vsock: remove an unused variable and fix infinite sleep
Patch 1 removes the unused 'wait' variable.
Patch 2 fixes an infinite sleep issue reported by a hv_sock user.
====================
Link: https://lore.kernel.org/r/20221101021706.26152-1-decui@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently vsock_connectible_has_data() may miss a wakeup operation
between vsock_connectible_has_data() == 0 and the prepare_to_wait().
Fix the race by adding the process to the wait queue before checking
vsock_connectible_has_data().
Fixes: b3f7fd5488 ("af_vsock: separate wait data loop")
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reported-by: Frédéric Dalleau <frederic.dalleau@docker.com>
Tested-by: Frédéric Dalleau <frederic.dalleau@docker.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
xen_enable_sysenter() and xen_enable_syscall() can be simplified a lot.
While at it, switch to use cpu_feature_enabled() instead of
boot_cpu_has().
Signed-off-by: Juergen Gross <jgross@suse.com>
Commit 8714f7bcd3 ("xen/pv: add fault recovery control to pmu msr
accesses") introduced code resulting in a warning issued by the smatch
static checker, claiming to use an uninitialized variable.
This is a false positive, but work around the warning nevertheless.
Fixes: 8714f7bcd3 ("xen/pv: add fault recovery control to pmu msr accesses")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Commit ae71ab585c ("drm/vc4: hdmi: Enforce the minimum rate at
runtime_resume") reintroduced the call to clk_set_min_rate in an attempt
to fix the boot without a monitor connected on the RaspberryPi3.
However, that introduced a regression breaking the display output
entirely (black screen but no vblank timeout) on the Pi4.
This is due to the fact that we now have in a typical modeset at boot,
in vc4_hdmi_encoder_pre_crtc_configure(), we have a first call to
clk_set_min_rate() asking for the minimum rate of the HSM clock for our
given resolution, and then a call to pm_runtime_resume_and_get(). We
will thus execute vc4_hdmi_runtime_resume() which, since the commit
mentioned above, will call clk_set_min_rate() a second time with the
absolute minimum rate we want to enforce on the HSM clock.
We're thus effectively erasing the minimum mandated by the mode we're
trying to set. The fact that only the Pi4 is affected is due to the fact
that it uses a different clock driver that tries to minimize the HSM
clock at all time. It will thus lower the HSM clock rate to 120MHz on
the second clk_set_min_rate() call.
The Pi3 doesn't use the same driver and will not change the frequency on
the second clk_set_min_rate() call since it's still within the new
boundaries and it doesn't have the code to minimize the clock rate as
needed. So even though the boundaries are still off, the clock rate is
still the right one for our given mode, so everything works.
There is a lot of moving parts, so I couldn't find any obvious
solution:
- Reverting the original is not an option, as that would break the Pi3
again.
- We can't move the clk_set_min_rate() call in _pre_crtc_configure()
since because, on the Pi3, the HSM clock has the CLK_SET_RATE_GATE
flag which prevents the clock rate from being changed after it's
been enabled. Our calls to clk_set_min_rate() can change it, so they
need to be done before clk_prepare_enable().
- We can't remove the call to clk_prepare_enable() from the
runtime_resume hook to put it into _pre_crtc_configure() either,
since we need that clock to be enabled to access the registers, and
we can't count on the fact that the display will be active in all
situations (doing any CEC operation, or listing the modes while
inactive are valid for example()).
- We can't drop the call to clk_set_min_rate() in
_pre_crtc_configure() since we would need to still enforce the
minimum rate for a given resolution, and runtime_resume doesn't have
access to the current mode, if there's any.
- We can't copy the TMDS character rate into vc4_hdmi and reuse it
since, because it's part of the KMS atomic state, it needs to be
protected by a mutex. Unfortunately, some functions (CEC operations,
mostly) can be reentrant (through the CEC framework) and still need
a pm_runtime_get.
However, we can work around this issue by leveraging the fact that the
clk_set_min_rate() calls set boundaries for its given struct clk, and
that each different clk_get() call will return a different instance of
struct clk. The clock framework will then aggregate the boundaries for
each struct clk instances linked to a given clock, plus its hardware
boundaries, and will use that.
We can thus get an extra HSM clock user for runtime_pm use only, and use
our different clock instances depending on the context: runtime_pm will
use its own to set the absolute minimum clock setup so that we never
lock the CPU waiting for a register access, and the modeset part will
set its requirement for the current resolution. And we let the CCF do
the coordination.
It's not an ideal solution, but it's fairly unintrusive and doesn't
really change any part of the logic so it looks like a rather safe fix.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2136234
Fixes: ae71ab585c ("drm/vc4: hdmi: Enforce the minimum rate at runtime_resume")
Reported-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20221021131339.2203291-1-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
A comment introduced by commit 6bed2ea3cb ("drm/vc4: hdmi: Reset link
on hotplug") mentions a drm_atomic_helper_connector_hdmi_reset_link()
function that was part of the earlier versions but got moved internally
and is now named vc4_hdmi_reset_link(). Let's fix the function name.
Fixes: 6bed2ea3cb ("drm/vc4: hdmi: Reset link on hotplug")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20221024093634.118190-2-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
We access some fields protected by our internal mutex in
vc4_hdmi_reset_link() (saved_adjusted_mode, output_bpc, output_format)
and are calling functions that need to have that lock taken
(vc4_hdmi_supports_scrambling()).
However, the current code doesn't lock that mutex. Let's make sure it
does.
Fixes: 6bed2ea3cb ("drm/vc4: hdmi: Reset link on hotplug")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20221024093634.118190-1-maxime@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
KASAN reported a use-after-free with ftrace ops [1]. It was found from
vmcore that perf had registered two ops with the same content
successively, both dynamic. After unregistering the second ops, a
use-after-free occurred.
In ftrace_shutdown(), when the second ops is unregistered, the
FTRACE_UPDATE_CALLS command is not set because there is another enabled
ops with the same content. Also, both ops are dynamic and the ftrace
callback function is ftrace_ops_list_func, so the
FTRACE_UPDATE_TRACE_FUNC command will not be set. Eventually the value
of 'command' will be 0 and ftrace_shutdown() will skip the rcu
synchronization.
However, ftrace may be activated. When the ops is released, another CPU
may be accessing the ops. Add the missing synchronization to fix this
problem.
[1]
BUG: KASAN: use-after-free in __ftrace_ops_list_func kernel/trace/ftrace.c:7020 [inline]
BUG: KASAN: use-after-free in ftrace_ops_list_func+0x2b0/0x31c kernel/trace/ftrace.c:7049
Read of size 8 at addr ffff56551965bbc8 by task syz-executor.2/14468
CPU: 1 PID: 14468 Comm: syz-executor.2 Not tainted 5.10.0 #7
Hardware name: linux,dummy-virt (DT)
Call trace:
dump_backtrace+0x0/0x40c arch/arm64/kernel/stacktrace.c:132
show_stack+0x30/0x40 arch/arm64/kernel/stacktrace.c:196
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1b4/0x248 lib/dump_stack.c:118
print_address_description.constprop.0+0x28/0x48c mm/kasan/report.c:387
__kasan_report mm/kasan/report.c:547 [inline]
kasan_report+0x118/0x210 mm/kasan/report.c:564
check_memory_region_inline mm/kasan/generic.c:187 [inline]
__asan_load8+0x98/0xc0 mm/kasan/generic.c:253
__ftrace_ops_list_func kernel/trace/ftrace.c:7020 [inline]
ftrace_ops_list_func+0x2b0/0x31c kernel/trace/ftrace.c:7049
ftrace_graph_call+0x0/0x4
__might_sleep+0x8/0x100 include/linux/perf_event.h:1170
__might_fault mm/memory.c:5183 [inline]
__might_fault+0x58/0x70 mm/memory.c:5171
do_strncpy_from_user lib/strncpy_from_user.c:41 [inline]
strncpy_from_user+0x1f4/0x4b0 lib/strncpy_from_user.c:139
getname_flags+0xb0/0x31c fs/namei.c:149
getname+0x2c/0x40 fs/namei.c:209
[...]
Allocated by task 14445:
kasan_save_stack+0x24/0x50 mm/kasan/common.c:48
kasan_set_track mm/kasan/common.c:56 [inline]
__kasan_kmalloc mm/kasan/common.c:479 [inline]
__kasan_kmalloc.constprop.0+0x110/0x13c mm/kasan/common.c:449
kasan_kmalloc+0xc/0x14 mm/kasan/common.c:493
kmem_cache_alloc_trace+0x440/0x924 mm/slub.c:2950
kmalloc include/linux/slab.h:563 [inline]
kzalloc include/linux/slab.h:675 [inline]
perf_event_alloc.part.0+0xb4/0x1350 kernel/events/core.c:11230
perf_event_alloc kernel/events/core.c:11733 [inline]
__do_sys_perf_event_open kernel/events/core.c:11831 [inline]
__se_sys_perf_event_open+0x550/0x15f4 kernel/events/core.c:11723
__arm64_sys_perf_event_open+0x6c/0x80 kernel/events/core.c:11723
[...]
Freed by task 14445:
kasan_save_stack+0x24/0x50 mm/kasan/common.c:48
kasan_set_track+0x24/0x34 mm/kasan/common.c:56
kasan_set_free_info+0x20/0x40 mm/kasan/generic.c:358
__kasan_slab_free.part.0+0x11c/0x1b0 mm/kasan/common.c:437
__kasan_slab_free mm/kasan/common.c:445 [inline]
kasan_slab_free+0x2c/0x40 mm/kasan/common.c:446
slab_free_hook mm/slub.c:1569 [inline]
slab_free_freelist_hook mm/slub.c:1608 [inline]
slab_free mm/slub.c:3179 [inline]
kfree+0x12c/0xc10 mm/slub.c:4176
perf_event_alloc.part.0+0xa0c/0x1350 kernel/events/core.c:11434
perf_event_alloc kernel/events/core.c:11733 [inline]
__do_sys_perf_event_open kernel/events/core.c:11831 [inline]
__se_sys_perf_event_open+0x550/0x15f4 kernel/events/core.c:11723
[...]
Link: https://lore.kernel.org/linux-trace-kernel/20221103031010.166498-1-lihuafei1@huawei.com
Fixes: edb096e007 ("ftrace: Fix memleak when unregistering dynamic ops when tracing disabled")
Cc: stable@vger.kernel.org
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
During the initialization of ip6_route_net_init_late(), if file
ipv6_route or rt6_stats fails to be created, the initialization is
successful by default. Therefore, the ipv6_route or rt6_stats file
doesn't be found during the remove in ip6_route_net_exit_late(). It
will cause WRNING.
The following is the stack information:
name 'rt6_stats'
WARNING: CPU: 0 PID: 9 at fs/proc/generic.c:712 remove_proc_entry+0x389/0x460
Modules linked in:
Workqueue: netns cleanup_net
RIP: 0010:remove_proc_entry+0x389/0x460
PKRU: 55555554
Call Trace:
<TASK>
ops_exit_list+0xb0/0x170
cleanup_net+0x4ea/0xb00
process_one_work+0x9bf/0x1710
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
</TASK>
Fixes: cdb1876192 ("[NETNS][IPV6] route6 - create route6 proc files for the namespace")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221102020610.351330-1-shaozhengchao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following commands should result in all the dynamic FDB entries
being flushed, but instead all the non-local (non-permanent) entries are
flushed:
# bridge fdb add 00:aa:bb:cc:dd:ee dev dummy1 master static
# bridge fdb add 00:11:22:33:44:55 dev dummy1 master dynamic
# ip link set dev br0 type bridge fdb_flush
# bridge fdb show brport dummy1
00:00:00:00:00:01 master br0 permanent
33:33:00:00:00:01 self permanent
01:00:5e:00:00:01 self permanent
This is because br_fdb_flush() works with FDB flags and not the
corresponding enumerator values. Fix by passing the FDB flag instead.
After the fix:
# bridge fdb add 00:aa:bb:cc:dd:ee dev dummy1 master static
# bridge fdb add 00:11:22:33:44:55 dev dummy1 master dynamic
# ip link set dev br0 type bridge fdb_flush
# bridge fdb show brport dummy1
00:aa:bb:cc:dd:ee master br0 static
00:00:00:00:00:01 master br0 permanent
33:33:00:00:00:01 self permanent
01:00:5e:00:00:01 self permanent
Fixes: 1f78ee14ee ("net: bridge: fdb: add support for fine-grained flushing")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20221101185753.2120691-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When IPv6 module gets initialized but hits an error in the middle,
kenel panic with:
KASAN: null-ptr-deref in range [0x0000000000000598-0x000000000000059f]
CPU: 1 PID: 361 Comm: insmod
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:__neigh_ifdown.isra.0+0x24b/0x370
RSP: 0018:ffff888012677908 EFLAGS: 00000202
...
Call Trace:
<TASK>
neigh_table_clear+0x94/0x2d0
ndisc_cleanup+0x27/0x40 [ipv6]
inet6_init+0x21c/0x2cb [ipv6]
do_one_initcall+0xd3/0x4d0
do_init_module+0x1ae/0x670
...
Kernel panic - not syncing: Fatal exception
When ipv6 initialization fails, it will try to cleanup and calls:
neigh_table_clear()
neigh_ifdown(tbl, NULL)
pneigh_queue_purge(&tbl->proxy_queue, dev_net(dev == NULL))
# dev_net(NULL) triggers null-ptr-deref.
Fix it by passing NULL to pneigh_queue_purge() in neigh_ifdown() if dev
is NULL, to make kernel not panic immediately.
Fixes: 66ba215cb5 ("neigh: fix possible DoS due to net iface start/stop loop")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Link: https://lore.kernel.org/r/20221101121552.21890-1-chenzhongjin@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In smc_init(), register_pernet_subsys(&smc_net_stat_ops) is called
without any error handling.
If it fails, registering of &smc_net_ops won't be reverted.
And if smc_nl_init() fails, &smc_net_stat_ops itself won't be reverted.
This leaves wild ops in subsystem linkedlist and when another module
tries to call register_pernet_operations() it triggers page fault:
BUG: unable to handle page fault for address: fffffbfff81b964c
RIP: 0010:register_pernet_operations+0x1b9/0x5f0
Call Trace:
<TASK>
register_pernet_subsys+0x29/0x40
ebtables_init+0x58/0x1000 [ebtables]
...
Fixes: 194730a9be ("net/smc: Make SMC statistics network namespace aware")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Reviewed-by: Wenjia Zhang <wenjia@linux.ibm.com>
Link: https://lore.kernel.org/r/20221101093722.127223-1-chenzhongjin@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In current code "plat->mdio_node" is always NULL, the mdio
support is lost as there is no "mdio_bus_data". The original
driver could work as the "mdio" variable is never set to
false, which is described in commit <b0e03950dd71> ("stmmac:
dwmac-loongson: fix uninitialized variable ......"). And
after this commit merged, the "mdio" variable is always
false, causing the mdio supoort logic lost.
Fixes: 30bba69d7d ("stmmac: pci: Add dwmac support for Loongson")
Signed-off-by: Liu Peibao <liupeibao@loongson.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221101060218.16453-1-liupeibao@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Free the rwi structure in the event that the last rwi in the list
processed successfully. The logic in commit 4f408e1fa6 ("ibmvnic:
retry reset if there are no other resets") introduces an issue that
results in a 32 byte memory leak whenever the last rwi in the list
gets processed.
Fixes: 4f408e1fa6 ("ibmvnic: retry reset if there are no other resets")
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Link: https://lore.kernel.org/r/20221031150642.13356-1-nnac123@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in drivers/net/phy/mdio_bus.c:586:27
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xa5
dump_stack+0x15/0x1b
ubsan_epilogue+0xe/0x4e
__ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
__mdiobus_register+0x49d/0x4e0
fixed_mdio_bus_init+0xd8/0x12d
do_one_initcall+0x76/0x430
kernel_init_freeable+0x3b3/0x422
kernel_init+0x24/0x1e0
ret_from_fork+0x1f/0x30
</TASK>
Fixes: 4fd5f812c2 ("phylib: allow incremental scanning of an mii bus")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221031132645.168421-1-cuigaosheng1@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
1) netlink socket notifier might win race to release objects that are
already pending to be released via commit release path, reported by
syzbot.
2) No need to postpone flow rule release to commit release path, this
triggered the syzbot report, complementary fix to previous patch.
3) Use explicit signed chars in IPVS to unbreak arm, from Jason A. Donenfeld.
4) Missing check for proc entry creation failure in IPVS, from Zhengchao Shao.
5) Incorrect error path handling when BPF NAT fails to register, from
Chen Zhongjin.
6) Prevent huge memory allocation in ipset hash types, from Jozsef Kadlecsik.
Except the incorrect BPF NAT error path which is broken in 6.1-rc, anything
else has been broken for several releases.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: ipset: enforce documented limit to prevent allocating huge memory
netfilter: nf_nat: Fix possible memory leak in nf_nat_init()
ipvs: fix WARNING in ip_vs_app_net_cleanup()
ipvs: fix WARNING in __ip_vs_cleanup_batch()
ipvs: use explicitly signed chars
netfilter: nf_tables: release flow rule object from commit path
netfilter: nf_tables: netlink notifier might race to release objects
====================
Link: https://lore.kernel.org/r/20221102184659.2502-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Luiz Augusto von Dentz says:
====================
bluetooth 2022-11-02
- Fix memory leak in hci_vhci driver
- Fix handling of skb on virtio_bt driver
- Fix accepting connection for invalid L2CAP PSM
- Fix attemting to access uninitialized memory
- Fix use-after-free in l2cap_reassemble_sdu
- Fix use-after-free in l2cap_conn_del
- Fix handling of destination address type for CIS
- Fix not restoring ISO buffer count on disconnect
* tag 'for-net-2022-10-02' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: Fix attempting to access uninitialized memory
Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm
Bluetooth: L2CAP: Fix accepting connection request for invalid SPSM
Bluetooth: hci_conn: Fix not restoring ISO buffer count on disconnect
Bluetooth: L2CAP: Fix memory leak in vhci_write
Bluetooth: L2CAP: fix use-after-free in l2cap_conn_del()
Bluetooth: virtio_bt: Use skb_put to set length
Bluetooth: hci_conn: Fix CIS connection dst_type handling
Bluetooth: L2CAP: Fix use-after-free caused by l2cap_reassemble_sdu
====================
Link: https://lore.kernel.org/r/20221102235927.3324891-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
l2cap_global_chan_by_psm shall not return fixed channels as they are not
meant to be connected by (S)PSM.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>
The Bluetooth spec states that the valid range for SPSM is from
0x0001-0x00ff so it is invalid to accept values outside of this range:
BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 3, Part A
page 1059:
Table 4.15: L2CAP_LE_CREDIT_BASED_CONNECTION_REQ SPSM ranges
CVE: CVE-2022-42896
CC: stable@vger.kernel.org
Reported-by: Tamás Koczka <poprdi@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reviewed-by: Tedd Ho-Jeong An <tedd.an@intel.com>
[Why]
Fix for some of the tool reported modes for FCLK
P-state deviations and UCLK P-state deviations that
are coming from DSC terms and/or Scaling terms
causing MinActiveFCLKChangeLatencySupported
and MaxActiveDRAMClockChangeLatencySupported
incorrectly calculated in DML for these configurations.
Reviewed-by: Chaitanya Dhere <Chaitanya.Dhere@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Certain 4K high refresh rate modes requiring DSC are exhibiting top
of screen underflow corruption. Increasing the DSC delay by a factor
of 6 percent stops the underflow for most use cases.
[How]
Multiply DSC delay requirement in DML by a factor.
Add debug option to make this DSC delay factor configurable.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DSC config is calculated separately from DML calculations.
DML should use these separately calculated DSC params. The issue is
that the calculated bpp is not properly propagated into DML.
[How]
Correctly used forced_bpp value in DML.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN32 DSC delay calculation had an unintentional integer division,
resulting in a mismatch against the DML spreadsheet.
[How]
Cast numerator to double before performing the division.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The recent change brought a bug on SRIOV envrionment. It caused
unloading amdgpu failed on Guest VM. The reason is that the VF
FLR was requested while unloading amdgpu driver, but the VF FLR
of SRIOV sequence is wrong while removing PCI device.
For SRIOV, the guest driver should not trigger the whole XGMI hive
to do the reset. Host driver control how the device been reset.
Fixes: f5c7e77970 ("drm/amdgpu: Adjust removal control flow for smu v13_0_2")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Shaoyun Liu <Shaoyun.Liu@amd.com>
Signed-off-by: Gavin Wan <Gavin.Wan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When disconnecting an ISO link the controller may not generate
HCI_EV_NUM_COMP_PKTS for unacked packets which needs to be restored in
hci_conn_del otherwise the host would assume they are still in use and
would not be able to use all the buffers available.
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Frédéric Danis <frederic.danis@collabora.com>
Syzkaller reports a memory leak as follows:
====================================
BUG: memory leak
unreferenced object 0xffff88810d81ac00 (size 240):
[...]
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff838733d9>] __alloc_skb+0x1f9/0x270 net/core/skbuff.c:418
[<ffffffff833f742f>] alloc_skb include/linux/skbuff.h:1257 [inline]
[<ffffffff833f742f>] bt_skb_alloc include/net/bluetooth/bluetooth.h:469 [inline]
[<ffffffff833f742f>] vhci_get_user drivers/bluetooth/hci_vhci.c:391 [inline]
[<ffffffff833f742f>] vhci_write+0x5f/0x230 drivers/bluetooth/hci_vhci.c:511
[<ffffffff815e398d>] call_write_iter include/linux/fs.h:2192 [inline]
[<ffffffff815e398d>] new_sync_write fs/read_write.c:491 [inline]
[<ffffffff815e398d>] vfs_write+0x42d/0x540 fs/read_write.c:578
[<ffffffff815e3cdd>] ksys_write+0x9d/0x160 fs/read_write.c:631
[<ffffffff845e0645>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<ffffffff845e0645>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
[<ffffffff84600087>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
====================================
HCI core will uses hci_rx_work() to process frame, which is queued to
the hdev->rx_q tail in hci_recv_frame() by HCI driver.
Yet the problem is that, HCI core may not free the skb after handling
ACL data packets. To be more specific, when start fragment does not
contain the L2CAP length, HCI core just copies skb into conn->rx_skb and
finishes frame process in l2cap_recv_acldata(), without freeing the skb,
which triggers the above memory leak.
This patch solves it by releasing the relative skb, after processing
the above case in l2cap_recv_acldata().
Fixes: 4d7ea8ee90 ("Bluetooth: L2CAP: Fix handling fragmented length")
Link: https://lore.kernel.org/all/0000000000000d0b1905e6aaef64@google.com/
Reported-and-tested-by: syzbot+8f819e36e01022991cfa@syzkaller.appspotmail.com
Signed-off-by: Hawkins Jiawei <yin31149@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This patch fixes the warning
memcpy: detected field-spanning write (size 60) of single field "to" at drivers/s390/crypto/zcrypt_api.h:173 (size 2)
WARNING: CPU: 1 PID: 2114 at drivers/s390/crypto/zcrypt_api.h:173 prep_ep11_ap_msg+0x2c6/0x2e0 [zcrypt]
The code has been rewritten to use a union in combination
with a flex array to clearly state which part of the buffer
the payload is to be copied in via z_copy_from_user
function (which may call memcpy() in case of in-kernel calls).
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Suggested-by: Jürgen Christ <jchrist@linux.ibm.com>
Reviewed-by: Jürgen Christ <jchrist@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When l2cap_recv_frame() is invoked to receive data, and the cid is
L2CAP_CID_A2MP, if the channel does not exist, it will create a channel.
However, after a channel is created, the hold operation of the channel
is not performed. In this case, the value of channel reference counting
is 1. As a result, after hci_error_reset() is triggered, l2cap_conn_del()
invokes the close hook function of A2MP to release the channel. Then
l2cap_chan_unlock(chan) will trigger UAF issue.
The process is as follows:
Receive data:
l2cap_data_channel()
a2mp_channel_create() --->channel ref is 2
l2cap_chan_put() --->channel ref is 1
Triger event:
hci_error_reset()
hci_dev_do_close()
...
l2cap_disconn_cfm()
l2cap_conn_del()
l2cap_chan_hold() --->channel ref is 2
l2cap_chan_del() --->channel ref is 1
a2mp_chan_close_cb() --->channel ref is 0, release channel
l2cap_chan_unlock() --->UAF of channel
The detailed Call Trace is as follows:
BUG: KASAN: use-after-free in __mutex_unlock_slowpath+0xa6/0x5e0
Read of size 8 at addr ffff8880160664b8 by task kworker/u11:1/7593
Workqueue: hci0 hci_error_reset
Call Trace:
<TASK>
dump_stack_lvl+0xcd/0x134
print_report.cold+0x2ba/0x719
kasan_report+0xb1/0x1e0
kasan_check_range+0x140/0x190
__mutex_unlock_slowpath+0xa6/0x5e0
l2cap_conn_del+0x404/0x7b0
l2cap_disconn_cfm+0x8c/0xc0
hci_conn_hash_flush+0x11f/0x260
hci_dev_close_sync+0x5f5/0x11f0
hci_dev_do_close+0x2d/0x70
hci_error_reset+0x9e/0x140
process_one_work+0x98a/0x1620
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
</TASK>
Allocated by task 7593:
kasan_save_stack+0x1e/0x40
__kasan_kmalloc+0xa9/0xd0
l2cap_chan_create+0x40/0x930
amp_mgr_create+0x96/0x990
a2mp_channel_create+0x7d/0x150
l2cap_recv_frame+0x51b8/0x9a70
l2cap_recv_acldata+0xaa3/0xc00
hci_rx_work+0x702/0x1220
process_one_work+0x98a/0x1620
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
Freed by task 7593:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_set_free_info+0x20/0x30
____kasan_slab_free+0x167/0x1c0
slab_free_freelist_hook+0x89/0x1c0
kfree+0xe2/0x580
l2cap_chan_put+0x22a/0x2d0
l2cap_conn_del+0x3fc/0x7b0
l2cap_disconn_cfm+0x8c/0xc0
hci_conn_hash_flush+0x11f/0x260
hci_dev_close_sync+0x5f5/0x11f0
hci_dev_do_close+0x2d/0x70
hci_error_reset+0x9e/0x140
process_one_work+0x98a/0x1620
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
Last potentially related work creation:
kasan_save_stack+0x1e/0x40
__kasan_record_aux_stack+0xbe/0xd0
call_rcu+0x99/0x740
netlink_release+0xe6a/0x1cf0
__sock_release+0xcd/0x280
sock_close+0x18/0x20
__fput+0x27c/0xa90
task_work_run+0xdd/0x1a0
exit_to_user_mode_prepare+0x23c/0x250
syscall_exit_to_user_mode+0x19/0x50
do_syscall_64+0x42/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Second to last potentially related work creation:
kasan_save_stack+0x1e/0x40
__kasan_record_aux_stack+0xbe/0xd0
call_rcu+0x99/0x740
netlink_release+0xe6a/0x1cf0
__sock_release+0xcd/0x280
sock_close+0x18/0x20
__fput+0x27c/0xa90
task_work_run+0xdd/0x1a0
exit_to_user_mode_prepare+0x23c/0x250
syscall_exit_to_user_mode+0x19/0x50
do_syscall_64+0x42/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: d0be8347c6 ("Bluetooth: L2CAP: Fix use-after-free caused by l2cap_chan_put")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
By using skb_put we ensure that skb->tail is set
correctly. Currently, skb->tail is always zero, which
leads to errors, such as the following page fault in
rfcomm_recv_frame:
BUG: unable to handle page fault for address: ffffed1021de29ff
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
RIP: 0010:rfcomm_run+0x831/0x4040 (net/bluetooth/rfcomm/core.c:1751)
Fixes: afd2daa26c ("Bluetooth: Add support for virtio transport driver")
Signed-off-by: Soenke Huster <soenke.huster@eknoes.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_connect_cis and iso_connect_cis call hci_bind_cis inconsistently
with dst_type being either ISO socket address type or the HCI type, but
these values cannot be mixed like this. Fix this by using only the HCI
type.
CIS connection dst_type was also not initialized in hci_bind_cis, even
though it is used in hci_conn_hash_lookup_cis to find existing
connections. Set the value in hci_bind_cis, so that existing CIS
connections are found e.g. when doing deferred socket connections, also
when dst_type is not 0 (ADDR_LE_DEV_PUBLIC).
Fixes: 26afbd826e ("Bluetooth: Add initial implementation of CIS connections")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix the race condition between the following two flows that run in
parallel:
1. l2cap_reassemble_sdu -> chan->ops->recv (l2cap_sock_recv_cb) ->
__sock_queue_rcv_skb.
2. bt_sock_recvmsg -> skb_recv_datagram, skb_free_datagram.
An SKB can be queued by the first flow and immediately dequeued and
freed by the second flow, therefore the callers of l2cap_reassemble_sdu
can't use the SKB after that function returns. However, some places
continue accessing struct l2cap_ctrl that resides in the SKB's CB for a
short time after l2cap_reassemble_sdu returns, leading to a
use-after-free condition (the stack trace is below, line numbers for
kernel 5.19.8).
Fix it by keeping a local copy of struct l2cap_ctrl.
BUG: KASAN: use-after-free in l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
Read of size 1 at addr ffff88812025f2f0 by task kworker/u17:3/43169
Workqueue: hci0 hci_rx_work [bluetooth]
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4))
print_report.cold (mm/kasan/report.c:314 mm/kasan/report.c:429)
? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
kasan_report (mm/kasan/report.c:162 mm/kasan/report.c:493)
? l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
l2cap_rx_state_recv (net/bluetooth/l2cap_core.c:6906) bluetooth
l2cap_rx (net/bluetooth/l2cap_core.c:7236 net/bluetooth/l2cap_core.c:7271) bluetooth
ret_from_fork (arch/x86/entry/entry_64.S:306)
</TASK>
Allocated by task 43169:
kasan_save_stack (mm/kasan/common.c:39)
__kasan_slab_alloc (mm/kasan/common.c:45 mm/kasan/common.c:436 mm/kasan/common.c:469)
kmem_cache_alloc_node (mm/slab.h:750 mm/slub.c:3243 mm/slub.c:3293)
__alloc_skb (net/core/skbuff.c:414)
l2cap_recv_frag (./include/net/bluetooth/bluetooth.h:425 net/bluetooth/l2cap_core.c:8329) bluetooth
l2cap_recv_acldata (net/bluetooth/l2cap_core.c:8442) bluetooth
hci_rx_work (net/bluetooth/hci_core.c:3642 net/bluetooth/hci_core.c:3832) bluetooth
process_one_work (kernel/workqueue.c:2289)
worker_thread (./include/linux/list.h:292 kernel/workqueue.c:2437)
kthread (kernel/kthread.c:376)
ret_from_fork (arch/x86/entry/entry_64.S:306)
Freed by task 27920:
kasan_save_stack (mm/kasan/common.c:39)
kasan_set_track (mm/kasan/common.c:45)
kasan_set_free_info (mm/kasan/generic.c:372)
____kasan_slab_free (mm/kasan/common.c:368 mm/kasan/common.c:328)
slab_free_freelist_hook (mm/slub.c:1780)
kmem_cache_free (mm/slub.c:3536 mm/slub.c:3553)
skb_free_datagram (./include/net/sock.h:1578 ./include/net/sock.h:1639 net/core/datagram.c:323)
bt_sock_recvmsg (net/bluetooth/af_bluetooth.c:295) bluetooth
l2cap_sock_recvmsg (net/bluetooth/l2cap_sock.c:1212) bluetooth
sock_read_iter (net/socket.c:1087)
new_sync_read (./include/linux/fs.h:2052 fs/read_write.c:401)
vfs_read (fs/read_write.c:482)
ksys_read (fs/read_write.c:620)
do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
Link: https://lore.kernel.org/linux-bluetooth/CAKErNvoqga1WcmoR3-0875esY6TVWFQDandbVZncSiuGPBQXLA@mail.gmail.com/T/#u
Fixes: d2a7ac5d5d ("Bluetooth: Add the ERTM receive state machine")
Fixes: 4b51dae967 ("Bluetooth: Add streaming mode receive and incoming packet classifier")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If a system does not have swap and memory is under 100% usage,
amdgpu will fail to evict resources. Currently the suspend
carries on proceeding to reset the GPU:
```
[drm] evicting device resources failed
[drm:amdgpu_device_ip_suspend_phase2 [amdgpu]] *ERROR* suspend of IP block <vcn_v3_0> failed -12
[drm] free PSP TMR buffer
[TTM] Failed allocating page table
[drm] evicting device resources failed
amdgpu 0000:03:00.0: amdgpu: MODE1 reset
amdgpu 0000:03:00.0: amdgpu: GPU mode1 reset
amdgpu 0000:03:00.0: amdgpu: GPU smu mode1 reset
```
At this point if the suspend actually succeeded I think that amdgpu
would have recovered because the GPU would have power cut off and
restored. However the kernel fails to continue the suspend from the
memory pressure and amdgpu fails to run the "resume" from the aborted
suspend.
```
ACPI: PM: Preparing to enter system sleep state S3
SLUB: Unable to allocate memory on node -1, gfp=0xdc0(GFP_KERNEL|__GFP_ZERO)
cache: Acpi-State, object size: 80, buffer size: 80, default order: 0, min order: 0
node 0: slabs: 22, objs: 1122, free: 0
ACPI Error: AE_NO_MEMORY, Could not update object reference count (20210730/utdelete-651)
[drm:psp_hw_start [amdgpu]] *ERROR* PSP load kdb failed!
[drm:psp_resume [amdgpu]] *ERROR* PSP resume failed
[drm:amdgpu_device_fw_loading [amdgpu]] *ERROR* resume of IP block <psp> failed -62
amdgpu 0000:03:00.0: amdgpu: amdgpu_device_ip_resume failed (-62).
PM: dpm_run_callback(): pci_pm_resume+0x0/0x100 returns -62
amdgpu 0000:03:00.0: PM: failed to resume async: error -62
```
To avoid this series of unfortunate events, fail amdgpu's suspend
when the memory eviction fails. This will let the system gracefully
recover and the user can try suspend again when the memory pressure
is relieved.
Reported-by: post@davidak.de
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2223
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Armv8 Juno fix for v6.1
Just a single fix to add the missing critical points in the thermal
zones that has been mandatory in the binding but was enforced in the
code recently.
* tag 'juno-fix-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Add thermal critical trip points
Link: https://lore.kernel.org/r/20221102140156.2758137-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use mes.sched_version, mes.kiq_version for debugfs as
mes.ucode_fw_version does not contain correct versioning information.
Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch to fix the gdm3 start failure with virual display:
/usr/libexec/gdm-x-session[1711]: (II) AMDGPU(0): Setting screen physical size to 270 x 203
/usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): Failed to make import prime FD as pixmap: 22
/usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): failed to set mode: Invalid argument
/usr/libexec/gdm-x-session[1711]: (WW) AMDGPU(0): Failed to set mode on CRTC 0
/usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): Failed to enable any CRTC
gnome-shell[1840]: Running GNOME Shell (using mutter 42.2) as a X11 window and compositing manager
/usr/libexec/gdm-x-session[1711]: (EE) AMDGPU(0): failed to set mode: Invalid argument
vkms doesn't have modifiers support, set fb_modifiers_not_supported to bring the gdm back.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Arm SCMI fixes for v6.1
A bunch of fixes to handle:
1. A possible resource leak in scmi_remove(). The returned error
value gets ignored by the driver core and can remove the device and
free the devm-allocated resources. As a simple solution to be able to
easily backport, the bind attributes in the driver is suppressed as
there is no need to support it. Additionally the remove path is cleaned
up by adding device links between the core and the protocol devices
so that a proper and complete unbinding happens.
2. A possible spin-loop in the SCMI transmit path in case of misbehaving
platform firmware. A timeout is added to the existing loop so that
the SCMI stack can bailout aborting the transmission with warnings.
3. Optional Rx channel correctly by reporting any memory errors instead
of ignoring the same with other allowed errors.
4. The use of proper device for all the device managed allocations in the
virtio transport.
5. Incorrect deferred_tx_wq release on the error paths by using devres
API(devm_add_action_or_reset) to manage the release in the error path.
* tag 'scmi-fixes-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix deferred_tx_wq release on error paths
firmware: arm_scmi: Fix devres allocation device in virtio transport
firmware: arm_scmi: Make Rx chan_setup fail on memory errors
firmware: arm_scmi: Make tx_prepare time out eventually
firmware: arm_scmi: Suppress the driver's bind attributes
firmware: arm_scmi: Cleanup the core driver removal callback
Link: https://lore.kernel.org/r/20221102140142.2758107-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull parisc architecture fixes from Helge Deller:
"This mostly handles oddities with the serial port 8250_gsc.c driver.
Although the name suggests it's just for serial ports on the GSC bus
(e.g. in older PA-RISC machines), it handles serial ports on PA-RISC
PCI devices (e.g. on the SuperIO chip) as well.
Thus this renames the driver to 8250_parisc and fixes the config
dependencies.
The other change is a cleanup on how the device IDs of devices in a
PA-RISC machine are shown at startup"
* tag 'parisc-for-6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Avoid printing the hardware path twice
parisc: Export iosapic_serial_irq() symbol for serial port driver
MAINTAINERS: adjust entry after renaming parisc serial driver
parisc: Use signed char for hardware path in pdc.h
parisc/serial: Rename 8250_gsc.c to 8250_parisc.c
parisc: Make 8250_gsc driver dependend on CONFIG_PARISC
Daniel Xu reported that the hash:net,iface type of the ipset subsystem does
not limit adding the same network with different interfaces to a set, which
can lead to huge memory usage or allocation failure.
The quick reproducer is
$ ipset create ACL.IN.ALL_PERMIT hash:net,iface hashsize 1048576 timeout 0
$ for i in $(seq 0 100); do /sbin/ipset add ACL.IN.ALL_PERMIT 0.0.0.0/0,kaf_$i timeout 0 -exist; done
The backtrace when vmalloc fails:
[Tue Oct 25 00:13:08 2022] ipset: vmalloc error: size 1073741848, exceeds total pages
<...>
[Tue Oct 25 00:13:08 2022] Call Trace:
[Tue Oct 25 00:13:08 2022] <TASK>
[Tue Oct 25 00:13:08 2022] dump_stack_lvl+0x48/0x60
[Tue Oct 25 00:13:08 2022] warn_alloc+0x155/0x180
[Tue Oct 25 00:13:08 2022] __vmalloc_node_range+0x72a/0x760
[Tue Oct 25 00:13:08 2022] ? hash_netiface4_add+0x7c0/0xb20
[Tue Oct 25 00:13:08 2022] ? __kmalloc_large_node+0x4a/0x90
[Tue Oct 25 00:13:08 2022] kvmalloc_node+0xa6/0xd0
[Tue Oct 25 00:13:08 2022] ? hash_netiface4_resize+0x99/0x710
<...>
The fix is to enforce the limit documented in the ipset(8) manpage:
> The internal restriction of the hash:net,iface set type is that the same
> network prefix cannot be stored with more than 64 different interfaces
> in a single set.
Fixes: ccf0a4b7fc ("netfilter: ipset: Add bucketsize parameter to all hash types")
Reported-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull NFS client bugfixes from Anna Schumaker:
- Fix some coccicheck warnings
- Avoid memcpy() run-time warning
- Fix up various state reclaim / RECLAIM_COMPLETE errors
- Fix a null pointer dereference in sysfs
- Fix LOCK races
- Fix gss_unwrap_resp_integ() crasher
- Fix zero length clones
- Fix memleak when allocate slot fails
* tag 'nfs-for-6.1-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
nfs4: Fix kmemleak when allocate slot failed
NFSv4.2: Fixup CLONE dest file size for zero-length count
SUNRPC: Fix crasher in gss_unwrap_resp_integ()
NFSv4: Retry LOCK on OLD_STATEID during delegation return
SUNRPC: Fix null-ptr-deref when xps sysfs alloc failed
NFSv4.1: We must always send RECLAIM_COMPLETE after a reboot
NFSv4.1: Handle RECLAIM_COMPLETE trunking errors
NFSv4: Fix a potential state reclaim deadlock
NFS: Avoid memcpy() run-time warning for struct sockaddr overflows
nfs: Remove redundant null checks before kfree
Pull rdma fixes from Jason Gunthorpe:
"Fix a few more of the usual sorts of bugs:
- Another regression with source route validation in CMA, introduced
this merge window
- Crash in hfi1 due to faulty list operations
- PCI ID updates for EFA
- Disable LOCAL_INV in hns because it causes a HW hang
- Crash in hns due to missing initialization
- Memory leak in rxe
- Missing error unwind during ib_core module loading
- Missing error handling in qedr around work queue creation during
startup"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/qedr: clean up work queue on failure in qedr_alloc_resources()
RDMA/core: Fix null-ptr-deref in ib_core_cleanup()
RDMA/rxe: Fix mr leak in RESPST_ERR_RNR
RDMA/hns: Fix NULL pointer problem in free_mr_init()
RDMA/hns: Disable local invalidate operation
RDMA/efa: Add EFA 0xefa2 PCI ID
IB/hfi1: Correctly move list in sc_disable()
RDMA/cma: Use output interface for net_dev check
Ignore guest CPUID for host userspace writes to the DEBUGCTL MSR, KVM's
ABI is that setting CPUID vs. state can be done in any order, i.e. KVM
allows userspace to stuff MSRs prior to setting the guest's CPUID that
makes the new MSR "legal".
Keep the vmx_get_perf_capabilities() check for guest writes, even though
it's technically unnecessary since the vCPU's PERF_CAPABILITIES is
consulted when refreshing LBR support. A future patch will clean up
vmx_get_perf_capabilities() to avoid the RDMSR on every call, at which
point the paranoia will incur no meaningful overhead.
Note, prior to vmx_get_perf_capabilities() checking that the host fully
supports LBRs via x86_perf_get_lbr(), KVM effectively relied on
intel_pmu_lbr_is_enabled() to guard against host userspace enabling LBRs
on platforms without full support.
Fixes: c646236344 ("KVM: vmx/pmu: Add PMU_CAP_LBR_FMT check when guest LBR is enabled")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221006000314.73240-5-seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fold vmx_supported_debugctl() into vcpu_supported_debugctl(), its only
caller. Setting bits only to clear them a few instructions later is
rather silly, and splitting the logic makes things seem more complicated
than they actually are.
Opportunistically drop DEBUGCTLMSR_LBR_MASK now that there's a single
reference to the pair of bits. The extra layer of indirection provides
no meaningful value and makes it unnecessarily tedious to understand
what KVM is doing.
No functional change.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221006000314.73240-4-seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Advertise LBR support to userspace via MSR_IA32_PERF_CAPABILITIES if and
only if perf fully supports LBRs. Perf may disable LBRs (by zeroing the
number of LBRs) even on platforms the allegedly support LBRs, e.g. if
probing any LBR MSRs during setup fails.
Fixes: be635e34c2 ("KVM: vmx/pmu: Expose LBR_FMT in the MSR_IA32_PERF_CAPABILITIES")
Reported-by: Like Xu <like.xu.linux@gmail.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221006000314.73240-3-seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
(cherry picked from commit d99884ad9e in ath-next
as users are seeing this bug more now, also cc stable)
Running this test in a loop it is easy to reproduce an rtnl deadlock:
iw reg set FI
ifconfig wlan0 down
What happens is that thread A (workqueue) tries to update the regulatory:
try to acquire the rtnl_lock of ar->regd_update_work
rtnl_lock+0x17/0x20
ath11k_regd_update+0x15a/0x260 [ath11k]
ath11k_regd_update_work+0x15/0x20 [ath11k]
process_one_work+0x228/0x670
worker_thread+0x4d/0x440
kthread+0x16d/0x1b0
ret_from_fork+0x22/0x30
And thread B (ifconfig) tries to stop the interface:
try to cancel_work_sync(&ar->regd_update_work) in ath11k_mac_op_stop().
ifconfig 3109 [003] 2414.232506: probe:
ath11k_mac_op_stop: (ffffffffc14187a0)
drv_stop+0x30 ([mac80211])
ieee80211_do_stop+0x5d2 ([mac80211])
ieee80211_stop+0x3e ([mac80211])
__dev_close_many+0x9e ([kernel.kallsyms])
__dev_change_flags+0xbe ([kernel.kallsyms])
dev_change_flags+0x23 ([kernel.kallsyms])
devinet_ioctl+0x5e3 ([kernel.kallsyms])
inet_ioctl+0x197 ([kernel.kallsyms])
sock_do_ioctl+0x4d ([kernel.kallsyms])
sock_ioctl+0x264 ([kernel.kallsyms])
__x64_sys_ioctl+0x92 ([kernel.kallsyms])
do_syscall_64+0x3a ([kernel.kallsyms])
entry_SYSCALL_64_after_hwframe+0x63 ([kernel.kallsyms])
__GI___ioctl+0x7 (/lib/x86_64-linux-gnu/libc-2.23.so)
The sequence of deadlock is:
1. Thread B calls rtnl_lock().
2. Thread A starts to run and calls rtnl_lock() from within
ath11k_regd_update_work(), then enters wait state because the lock is owned by
thread B.
3. Thread B continues to run and tries to call
cancel_work_sync(&ar->regd_update_work), but thread A is in
ath11k_regd_update_work() waiting for rtnl_lock(). So cancel_work_sync()
forever waits for ath11k_regd_update_work() to finish and we have a deadlock.
Fix this by switching from using regulatory_set_wiphy_regd_sync() to
regulatory_set_wiphy_regd(). Now cfg80211 will schedule another workqueue which
handles the locking on it's own. So the ath11k workqueue can simply exit without
taking any locks, avoiding the deadlock.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3
Cc: <stable@vger.kernel.org>
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
[kvalo: improve commit log]
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
The 2.7.0 series of QCN9074's firmware requests 5 segments
of memory instead of 3 (as in the 2.5.0 series).
The first segment (11M) is too large to be kalloc'd in one
go on x86 and requires piecemeal 1MB allocations, as was
the case with the prior public firmware (2.5.0, 15M).
Since f6f92968e1, ath11k will break the memory requests,
but only if there were fewer than 3 segments requested by
the firmware. It seems that 5 segments works fine and
allows QCN9074 to boot on x86 with firmware 2.7.0, so
change things accordingly.
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.16
Signed-off-by: Tyler J. Stachecki <stachecki.tyler@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20221022042728.43015-1-stachecki.tyler@gmail.com
During a nowait buffered write, if we fail to balance dirty pages we exit
btrfs_buffered_write() without releasing the delalloc space reserved for
an extent, resulting in leaking space from the inode's block reserve.
So fix that by releasing the delalloc space for the extent when balancing
dirty pages fails.
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/all/202210111304.d369bc32-yujie.liu@intel.com
Fixes: 965f47aeb5 ("btrfs: make btrfs_buffered_write nowait compatible")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we are doing a buffered write in NOWAIT context and we can't reserve
metadata space due to -ENOSPC, then we should return -EAGAIN so that we
retry the write in a context allowed to block and do metadata reservation
with flushing, which might succeed this time due to the allowed flushing.
Returning -ENOSPC while in NOWAIT context simply makes some writes fail
with -ENOSPC when they would likely succeed after switching from NOWAIT
context to blocking context. That is unexpected behaviour and even fio
complains about it with a warning like this:
fio: io_u error on file /mnt/sdi/task_0.0.0: No space left on device: write offset=1535705088, buflen=65536
fio: pid=592630, err=28/file:io_u.c:1846, func=io_u error, error=No space left on device
The fio's job config is this:
[global]
bs=64K
ioengine=io_uring
iodepth=1
size=2236962133
nr_files=1
filesize=2236962133
direct=0
runtime=10
fallocate=posix
io_size=2236962133
group_reporting
time_based
[task_0]
rw=randwrite
directory=/mnt/sdi
numjobs=4
So fix this by returning -EAGAIN if we are in NOWAIT context and the
metadata reservation failed with -ENOSPC.
Fixes: 304e45acdb ("btrfs: plumb NOWAIT through the write path")
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Several places in the qgroup self tests follow the pattern of freeing the
ulist pointer they passed to btrfs_find_all_roots() if the call to that
function returned an error. That is pointless because that function always
frees the ulist in case it returns an error.
Also In some places like at test_multiple_refs(), after a call to
btrfs_qgroup_account_extent() we also leave "old_roots" and "new_roots"
pointing to ulists that were freed, because btrfs_qgroup_account_extent()
has freed those ulists, and if after that the next call to
btrfs_find_all_roots() fails, we call ulist_free() on the "old_roots"
ulist again, resulting in a double free.
So remove those calls to reduce the code size and avoid double ulist
free in case of an error.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In the test_no_shared_qgroup() and test_multiple_refs() qgroup self tests,
if we fail to add the tree ref, remove the extent item or remove the
extent ref, we are returning from the test function without freeing the
"old_roots" ulist that was allocated by the previous calls to
btrfs_find_all_roots(). Fix that by calling ulist_free() before returning.
Fixes: 442244c963 ("btrfs: qgroup: Switch self test to extent-oriented qgroup mechanism.")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During backref walking, at find_parent_nodes(), if we are dealing with a
data extent and we get an error while resolving the indirect backrefs, at
resolve_indirect_refs(), or in the while loop that iterates over the refs
in the direct refs rbtree, we end up leaking the inode lists attached to
the direct refs we have in the direct refs rbtree that were not yet added
to the refs ulist passed as argument to find_parent_nodes(). Since they
were not yet added to the refs ulist and prelim_release() does not free
the lists, on error the caller can only free the lists attached to the
refs that were added to the refs ulist, all the remaining refs get their
inode lists never freed, therefore leaking their memory.
Fix this by having prelim_release() always free any attached inode list
to each ref found in the rbtree, and have find_parent_nodes() set the
ref's inode list to NULL once it transfers ownership of the inode list
to a ref added to the refs ulist passed to find_parent_nodes().
Fixes: 86d5f99442 ("btrfs: convert prelimary reference tracking to use rbtrees")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
During backref walking, at resolve_indirect_refs(), if we get an error
we jump to the 'out' label and call ulist_free() on the 'parents' ulist,
which frees all the elements in the ulist - however that does not free
any inode lists that may be attached to elements, through the 'aux' field
of a ulist node, so we end up leaking lists if we have any attached to
the unodes.
Fix this by calling free_leaf_list() instead of ulist_free() when we exit
from resolve_indirect_refs(). The static function free_leaf_list() is
moved up for this to be possible and it's slightly simplified by removing
unnecessary code.
Fixes: 3301958b7c ("Btrfs: add inodes before dropping the extent lock in find_all_leafs")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If hid_add_device() returns error, it should call hid_destroy_device()
to free hid_dev which is allocated in hid_allocate_device().
Fixes: 74c4fb0580 ("HID: hv_mouse: Properly add the hid device")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Variable count is just being incremented and it's never used
anywhere else. The variable and the increment are redundant so
remove it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Yang Yingliang says:
====================
two fixes for mISDN
This patchset fixes two issues when device_add() returns error.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The class is set in mISDN_register_device(), but if device_add() returns
error, it will lead to delete a device without added, fix this by using
device_is_registered() to check if the device is registered.
Fixes: a900845e56 ("mISDN: Add support for Traverse Technologies NETJet PCI cards")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Afer commit 1fa5ae857b ("driver core: get rid of struct device's
bus_id string array"), the name of device is allocated dynamically,
add put_device() to give up the reference, so that the name can be
freed in kobject_cleanup() when the refcount is 0.
Set device class before put_device() to avoid null release() function
WARN message in device_release().
Fixes: 1fa5ae857b ("driver core: get rid of struct device's bus_id string array")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The syzkaller reported an issue:
KASAN: null-ptr-deref in range [0x0000000000000380-0x0000000000000387]
CPU: 0 PID: 4069 Comm: kworker/0:15 Not tainted 6.0.0-syzkaller-02734-g0326074ff465 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/22/2022
Workqueue: rcu_gp srcu_invoke_callbacks
RIP: 0010:rose_send_frame+0x1dd/0x2f0 net/rose/rose_link.c:101
Call Trace:
<IRQ>
rose_transmit_clear_request+0x1d5/0x290 net/rose/rose_link.c:255
rose_rx_call_request+0x4c0/0x1bc0 net/rose/af_rose.c:1009
rose_loopback_timer+0x19e/0x590 net/rose/rose_loopback.c:111
call_timer_fn+0x1a0/0x6b0 kernel/time/timer.c:1474
expire_timers kernel/time/timer.c:1519 [inline]
__run_timers.part.0+0x674/0xa80 kernel/time/timer.c:1790
__run_timers kernel/time/timer.c:1768 [inline]
run_timer_softirq+0xb3/0x1d0 kernel/time/timer.c:1803
__do_softirq+0x1d0/0x9c8 kernel/softirq.c:571
[...]
</IRQ>
It triggers NULL pointer dereference when 'neigh->dev->dev_addr' is
called in the rose_send_frame(). It's the first occurrence of the
`neigh` is in rose_loopback_timer() as `rose_loopback_neigh', and
the 'dev' in 'rose_loopback_neigh' is initialized sa nullptr.
It had been fixed by commit 3b3fd068c5
("rose: Fix Null pointer dereference in rose_send_frame()") ever.
But it's introduced by commit 3c53cd65de
("rose: check NULL rose_loopback_neigh->loopback") again.
We fix it by add NULL check in rose_transmit_clear_request(). When
the 'dev' in 'neigh' is NULL, we don't reply the request and just
clear it.
syzkaller don't provide repro, and I provide a syz repro like:
r0 = syz_init_net_socket$bt_sco(0x1f, 0x5, 0x2)
ioctl$sock_inet_SIOCSIFFLAGS(r0, 0x8914, &(0x7f0000000180)={'rose0\x00', 0x201})
r1 = syz_init_net_socket$rose(0xb, 0x5, 0x0)
bind$rose(r1, &(0x7f00000000c0)=@full={0xb, @dev, @null, 0x0, [@null, @null, @netrom, @netrom, @default, @null]}, 0x40)
connect$rose(r1, &(0x7f0000000240)=@short={0xb, @dev={0xbb, 0xbb, 0xbb, 0x1, 0x0}, @remote={0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x1}, 0x1, @netrom={0xbb, 0xbb, 0xbb, 0xbb, 0xbb, 0x0, 0x0}}, 0x1c)
Fixes: 3c53cd65de ("rose: check NULL rose_loopback_neigh->loopback")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Running the test currently fails on non-SMP systems, despite being
enabled by default. This means that running the test with:
./tools/testing/kunit/kunit.py run --arch x86_64 hw_breakpoint
results in every hw_breakpoint test failing with:
# test_one_cpu: failed to initialize: -22
not ok 1 - test_one_cpu
Instead, use kunit_skip(), which will mark the test as skipped, and give
a more comprehensible message:
ok 1 - test_one_cpu # SKIP not enough cpus
This makes it more obvious that the test is not suited to the test
environment, and so wasn't run, rather than having run and failed.
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Acked-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20221026141040.1609203-1-davidgow@google.com
When using bpftool to pin {PROG, MAP, LINK} without FILE,
segmentation fault will occur. The reson is that the lack
of FILE will cause strlen to trigger NULL pointer dereference.
The corresponding stacktrace is shown below:
do_pin
do_pin_any
do_pin_fd
mount_bpffs_for_pin
strlen(name) <- NULL pointer dereference
Fix it by adding validation to the common process.
Fixes: 75a1e792c3 ("tools: bpftool: Allow all prog/map handles for pinning objects")
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20221102084034.3342995-1-pulehui@huaweicloud.com
In nf_nat_init(), register_nf_nat_bpf() can fail and return directly
without any error handling.
Then nf_nat_bysource will leak and registering of &nat_net_ops,
&follow_master_nat and nf_nat_hook won't be reverted.
This leaves wild ops in linkedlists and when another module tries to
call register_pernet_operations() or nf_ct_helper_expectfn_register()
it triggers page fault:
BUG: unable to handle page fault for address: fffffbfff81b964c
RIP: 0010:register_pernet_operations+0x1b9/0x5f0
Call Trace:
<TASK>
register_pernet_subsys+0x29/0x40
ebtables_init+0x58/0x1000 [ebtables]
...
Fixes: 820dc0523e ("net: netfilter: move bpf_ct_set_nat_info kfunc in nf_nat_bpf.c")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When device is running and the interface status is changed, the gpf issue
is triggered. The problem triggering process is as follows:
Thread A: Thread B
ieee80211_runtime_change_iftype() process_one_work()
... ...
ieee80211_do_stop() ...
... ...
sdata->bss = NULL ...
... ieee80211_subif_start_xmit()
ieee80211_multicast_to_unicast
//!sdata->bss->multicast_to_unicast
cause gpf issue
When the interface status is changed, the sending queue continues to send
packets. After the bss is set to NULL, the bss is accessed. As a result,
this causes a general-protection-fault issue.
The following is the stack information:
general protection fault, probably for non-canonical address
0xdffffc000000002f: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000178-0x000000000000017f]
Workqueue: mld mld_ifc_work
RIP: 0010:ieee80211_subif_start_xmit+0x25b/0x1310
Call Trace:
<TASK>
dev_hard_start_xmit+0x1be/0x990
__dev_queue_xmit+0x2c9a/0x3b60
ip6_finish_output2+0xf92/0x1520
ip6_finish_output+0x6af/0x11e0
ip6_output+0x1ed/0x540
mld_sendpack+0xa09/0xe70
mld_ifc_work+0x71c/0xdb0
process_one_work+0x9bf/0x1710
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
</TASK>
Fixes: f856373e2f ("wifi: mac80211: do not wake queues on a vif that is being stopped")
Reported-by: syzbot+c6e8fca81c294fd5620a@syzkaller.appspotmail.com
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20221026063959.177813-1-shaozhengchao@huawei.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During the initialization of ip_vs_app_net_init(), if file ip_vs_app
fails to be created, the initialization is successful by default.
Therefore, the ip_vs_app file doesn't be found during the remove in
ip_vs_app_net_cleanup(). It will cause WRNING.
The following is the stack information:
name 'ip_vs_app'
WARNING: CPU: 1 PID: 9 at fs/proc/generic.c:712 remove_proc_entry+0x389/0x460
Modules linked in:
Workqueue: netns cleanup_net
RIP: 0010:remove_proc_entry+0x389/0x460
Call Trace:
<TASK>
ops_exit_list+0x125/0x170
cleanup_net+0x4ea/0xb00
process_one_work+0x9bf/0x1710
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
</TASK>
Fixes: 457c4cbc5a ("[NET]: Make /proc/net per network namespace")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
During the initialization of ip_vs_conn_net_init(), if file ip_vs_conn
or ip_vs_conn_sync fails to be created, the initialization is successful
by default. Therefore, the ip_vs_conn or ip_vs_conn_sync file doesn't
be found during the remove.
The following is the stack information:
name 'ip_vs_conn_sync'
WARNING: CPU: 3 PID: 9 at fs/proc/generic.c:712
remove_proc_entry+0x389/0x460
Modules linked in:
Workqueue: netns cleanup_net
RIP: 0010:remove_proc_entry+0x389/0x460
Call Trace:
<TASK>
__ip_vs_cleanup_batch+0x7d/0x120
ops_exit_list+0x125/0x170
cleanup_net+0x4ea/0xb00
process_one_work+0x9bf/0x1710
worker_thread+0x665/0x1080
kthread+0x2e4/0x3a0
ret_from_fork+0x1f/0x30
</TASK>
Fixes: 61b1ab4583 ("IPVS: netns, add basic init per netns.")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The `char` type with no explicit sign is sometimes signed and sometimes
unsigned. This code will break on platforms such as arm, where char is
unsigned. So mark it here as explicitly signed, so that the
todrop_counter decrement and subsequent comparison is correct.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Since commit d05377e184 ("kconfig: Create links to main menu items
in search"), menuconfig shows a jump key next to "Main menu" if the
nearest visible parent is the rootmenu. If you press that jump key,
menuconfig crashes with a segmentation fault.
For example, do this:
$ make ARCH=arm64 allnoconfig menuconfig
Press '/' to search for the string "ACPI". Press '1' to choose
"(1) Main menu". Then, menuconfig crashed with a segmentation fault.
The following code in search_conf()
conf(targets[i]->parent, targets[i]);
results in NULL pointer dereference because targets[i] is the rootmenu,
which does not have a parent.
Commit d05377e184 tried to fix the issue of top-level items not having
a jump key, but adding the "Main menu" was not the right fix.
The correct fix is to show the searched item itself. This fixes another
weird behavior described in the comment block.
Fixes: d05377e184 ("kconfig: Create links to main menu items in search")
Reported-by: Johannes Zink <j.zink@pengutronix.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Johannes Zink <j.zink@pengutronix.de>
Jakub reported that the addition of the "network_byte_order"
member in struct nla_policy increases size of 32bit platforms.
Instead of scraping the bit from elsewhere Johannes suggested
to add explicit NLA_BE types instead, so do this here.
NLA_POLICY_MAX_BE() macro is removed again, there is no need
for it: NLA_POLICY_MAX(NLA_BE.., ..) will do the right thing.
NLA_BE64 can be added later.
Fixes: 08724ef699 ("netlink: introduce NLA_POLICY_MAX_BE")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20221031123407.9158-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When lan966x was receiving a frame, then it was building the skb and
after that it was calling dma_unmap_single with frame size as the
length. This actually has 2 issues:
1. It is using a length to map and a different length to unmap.
2. When the unmap was happening, the data was sync for cpu but it could
be that this will overwrite what build_skb was initializing.
The fix for these two problems is to change the order of operations.
First to sync the frame for cpu, then to build the skb and in the end to
unmap using the correct size but without sync the frame again for cpu.
Fixes: c834963932 ("net: lan966x: Add FDMA functionality")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://lore.kernel.org/r/20221031133421.1283196-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Horatiu Vultur says:
====================
net: lan966x: Fixes for when MTU is changed
There were multiple problems in different parts of the driver when
the MTU was changed.
The first problem was that the HW was missing to configure the correct
value, it was missing ETH_HLEN and ETH_FCS_LEN. The second problem was
when vlan filtering was enabled/disabled, the MRU was not adjusted
corretly. While the last issue was that the FDMA was calculated wrongly
the correct maximum MTU.
====================
Link: https://lore.kernel.org/r/20221030213636.1031408-1-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When MTU is changed, FDMA is required to calculate what is the maximum
size of the frame that it can received. So it can calculate what is the
page order needed to allocate for the received frames.
The first problem was that, when the max MTU was calculated it was
reading the value from dev and not from HW, so in this way it was
missing L2 header + the FCS.
The other problem was that once the skb is created using
__build_skb_around, it would reserve some space for skb_shared_info.
So if we received a frame which size is at the limit of the page order
then the creating will failed because it would not have space to put all
the data.
Fixes: 2ea1cbac26 ("net: lan966x: Update FDMA to change MTU.")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When vlan filtering is enabled/disabled, it is required to adjust the
maximum received frame size that it can received. When vlan filtering is
enabled, it would all to receive extra 4 bytes, that are the vlan tag.
So the maximum frame size would be 1522 with a vlan tag. If vlan
filtering is disabled then the maximum frame size would be 1518
regardless if there is or not a vlan tag.
Fixes: 6d2c186afa ("net: lan966x: Add vlan support.")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the MTU was changed, the lan966x didn't take in consideration
the L2 header and the FCS. So the HW was configured with a smaller
value than what was desired. Therefore the correct value to configure
the HW would be new_mtu + ETH_HLEN + ETH_FCS_LEN.
The vlan tag is not considered here, because at the time when the
blamed commit was added, there was no vlan filtering support. The
vlan fix will be part of the next patch.
Fixes: d28d6d2e37 ("net: lan966x: add port module support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All normal kernel memory is "TDX private memory". This includes
everything from kernel stacks to kernel text. Handling
exceptions on arbitrary accesses to kernel memory is essentially
impossible because they can happen in horribly nasty places like
kernel entry/exit. But, TDX hardware can theoretically _deliver_
a virtualization exception (#VE) on any access to private memory.
But, it's not as bad as it sounds. TDX can be configured to never
deliver these exceptions on private memory with a "TD attribute"
called ATTR_SEPT_VE_DISABLE. The guest has no way to *set* this
attribute, but it can check it.
Ensure ATTR_SEPT_VE_DISABLE is set in early boot. panic() if it
is unset. There is no sane way for Linux to run with this
attribute clear so a panic() is appropriate.
There's small window during boot before the check where kernel
has an early #VE handler. But the handler is only for port I/O
and will also panic() as soon as it sees any other #VE, such as
a one generated by a private memory access.
[ dhansen: Rewrite changelog and rebase on new tdx_parse_tdinfo().
Add Kirill's tested-by because I made changes since
he wrote this. ]
Fixes: 9a22bf6deb ("x86/traps: Add #VE support for TDX guest")
Reported-by: ruogui.ygr@alibaba-inc.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20221028141220.29217-3-kirill.shutemov%40linux.intel.com
When an intermediate port's decoders have been exhausted by existing
regions, and creating a new region with the port in question in it's
hierarchical path is attempted, cxl_port_attach_region() fails to find a
port decoder (as would be expected), and drops into the failure / cleanup
path.
However, during cleanup of the region reference, a sanity check attempts
to dereference the decoder, which in the above case didn't exist. This
causes a NULL pointer dereference BUG.
To fix this, refactor the decoder allocation and de-allocation into
helper routines, and in this 'free' routine, check that the decoder,
@cxld, is valid before attempting any operations on it.
Cc: <stable@vger.kernel.org>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Fixes: 384e624bb2 ("cxl/region: Attach endpoint decoders")
Link: https://lore.kernel.org/r/20221101074100.1732003-1-vishal.l.verma@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull documentation fixes from Jonathan Corbet:
"Four small fixes for the docs tree"
* tag 'docs-6.1-fixes' of git://git.lwn.net/linux:
docs/process/howto: Replace C89 with C11
Documentation: Fix spelling mistake in hacking.rst
Documentation: process: replace outdated LTS table w/ link
tracing/histogram: Update document for KEYS_MAX size
Pull nfsd fix from Chuck Lever:
- Fix a loop that occurs when using multiple net namespaces
* tag 'nfsd-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: fix net-namespace logic in __nfsd_file_cache_purge
When running `test_sockmap` selftests, the following warning appears:
WARNING: CPU: 2 PID: 197 at net/core/stream.c:205 sk_stream_kill_queues+0xd3/0xf0
Call Trace:
<TASK>
inet_csk_destroy_sock+0x55/0x110
tcp_rcv_state_process+0xd28/0x1380
? tcp_v4_do_rcv+0x77/0x2c0
tcp_v4_do_rcv+0x77/0x2c0
__release_sock+0x106/0x130
__tcp_close+0x1a7/0x4e0
tcp_close+0x20/0x70
inet_release+0x3c/0x80
__sock_release+0x3a/0xb0
sock_close+0x14/0x20
__fput+0xa3/0x260
task_work_run+0x59/0xb0
exit_to_user_mode_prepare+0x1b3/0x1c0
syscall_exit_to_user_mode+0x19/0x50
do_syscall_64+0x48/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
The root case is in commit 84472b436e ("bpf, sockmap: Fix more uncharged
while msg has more_data"), where I used msg->sg.size to replace the tosend,
causing breakage:
if (msg->apply_bytes && msg->apply_bytes < tosend)
tosend = psock->apply_bytes;
Fixes: 84472b436e ("bpf, sockmap: Fix more uncharged while msg has more_data")
Reported-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/1667266296-8794-1-git-send-email-wangyufen@huawei.com
Pull nolibc fixes from Paul McKenney:
"This contains a couple of fixes for string-function bugs"
* tag 'nolibc-urgent.2022.10.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
tools/nolibc/string: Fix memcmp() implementation
tools/nolibc: Fix missing strlen() definition and infinite loop with gcc-12
Pull kvm fixes from Paolo Bonzini:
"x86:
- fix lock initialization race in gfn-to-pfn cache (+selftests)
- fix two refcounting errors
- emulator fixes
- mask off reserved bits in CPUID
- fix bug with disabling SGX
RISC-V:
- update MAINTAINERS"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/xen: Fix eventfd error handling in kvm_xen_eventfd_assign()
KVM: x86: smm: number of GPRs in the SMRAM image depends on the image format
KVM: x86: emulator: update the emulation mode after CR0 write
KVM: x86: emulator: update the emulation mode after rsm
KVM: x86: emulator: introduce emulator_recalc_and_set_mode
KVM: x86: emulator: em_sysexit should update ctxt->mode
KVM: selftests: Mark "guest_saw_irq" as volatile in xen_shinfo_test
KVM: selftests: Add tests in xen_shinfo_test to detect lock races
KVM: Reject attempts to consume or refresh inactive gfn_to_pfn_cache
KVM: Initialize gfn_to_pfn_cache locks in dedicated helper
KVM: VMX: fully disable SGX if SECONDARY_EXEC_ENCLS_EXITING unavailable
KVM: x86: Exempt pending triple fault from event injection sanity check
MAINTAINERS: git://github -> https://github.com for kvm-riscv
KVM: debugfs: Return retval of simple_attr_open() if it fails
KVM: x86: Reduce refcount if single_open() fails in kvm_mmu_rmaps_stat_open()
KVM: x86: Mask off reserved bits in CPUID.8000001FH
KVM: x86: Mask off reserved bits in CPUID.8000001AH
KVM: x86: Mask off reserved bits in CPUID.80000008H
KVM: x86: Mask off reserved bits in CPUID.80000006H
KVM: x86: Mask off reserved bits in CPUID.80000001H
Pull watchdog fixes from Wim Van Sebroeck:
- fix use after free in exar driver
- spelling fix in comment
* tag 'linux-watchdog-6.1-rc4' of git://www.linux-watchdog.org/linux-watchdog:
drivers: watchdog: exar_wdt.c fix use after free
watchdog: sp805_wdt: fix spelling typo in comment
The TDG.VP.INFO TDCALL provides the guest with various details about
the TDX system that the guest needs to run. Only one field is currently
used: 'gpa_width' which tells the guest which PTE bits mark pages shared
or private.
A second field is now needed: the guest "TD attributes" to tell if
virtualization exceptions are configured in a way that can harm the guest.
Make the naming and calling convention more generic and discrete from the
mask-centric one.
Thanks to Sathya for the inspiration here, but there's no code, comments
or changelogs left from where he started.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: stable@vger.kernel.org
xfs: improve runtime refcountbt corruption detection
Fuzz testing of the refcount btree demonstrated a weakness in validation
of refcount btree records during normal runtime. The idea of using the
upper bit of the rc_startblock field to separate the refcount records
into one group for shared space and another for CoW staging extents was
added at the last minute. The incore struct left this bit encoded in
the upper bit of the startblock field, which makes it all too easy for
arithmetic operations to overflow if we don't detect the cowflag
properly.
When I ran a norepair fuzz tester, I was able to crash the kernel on one
of these accidental overflows by fuzzing a key record in a node block,
which broke lookups. To fix the problem, make the domain (shared/cow) a
separate field in the incore record.
Unfortunately, a customer also hit this once in production. Due to bugs
in the kernel running on the VM host, writes to the disk image would
occasionally be lost. Given sufficient memory pressure on the VM guest,
a refcountbt xfs_buf could be reclaimed and later reloaded from the
stale copy on the virtual disk. The stale disk contents were a refcount
btree leaf block full of records for the wrong domain, and this caused
an infinite loop in the guest VM.
v2: actually include the refcount adjust loop invariant checking patch;
move the deferred refcount continuation checks earlier in the series;
break up the megapatch into smaller pieces; fix an uninitialized list
error.
v3: in the continuation check patch, verify the per-ag extent before
converting it to a fsblock
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
* tag 'refcount-cow-domain-6.1_2022-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: rename XFS_REFC_COW_START to _COWFLAG
xfs: fix uninitialized list head in struct xfs_refcount_recovery
xfs: fix agblocks check in the cow leftover recovery function
xfs: check record domain when accessing refcount records
xfs: remove XFS_FIND_RCEXT_SHARED and _COW
xfs: refactor domain and refcount checking
xfs: report refcount domain in tracepoints
xfs: track cow/shared record domains explicitly in xfs_refcount_irec
xfs: refactor refcount record usage in xchk_refcountbt_rec
xfs: move _irec structs to xfs_types.h
xfs: check deferred refcount op continuation parameters
xfs: create a predicate to verify per-AG extents
xfs: make sure aglen never goes negative in xfs_refcount_adjust_extents
The trapping of SMPRI_EL1 and TPIDR2_EL0 currently only really
work on nVHE, as only this mode uses the fine-grained trapping
that controls these two registers.
Move the trapping enable/disable code into
__{de,}activate_traps_common(), allowing it to be called when it
actually matters on VHE, and remove the flipping of EL2 control
for TPIDR2_EL0, which only affects the host access of this
register.
Fixes: 861262ab86 ("KVM: arm64: Handle SME host state when running guests")
Reported-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/86bkpqer4z.wl-maz@kernel.org
If an error (NULL) is returned by krealloc(), callers of realloc_array()
were setting their allocation pointers to NULL, but on error krealloc()
does not touch the original allocation. This would result in a memory
resource leak. Instead, free the old allocation on the error handling
path.
The memory leak information is as follows as also reported by Zhengchao:
unreferenced object 0xffff888019801800 (size 256):
comm "bpf_repo", pid 6490, jiffies 4294959200 (age 17.170s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000b211474b>] __kmalloc_node_track_caller+0x45/0xc0
[<0000000086712a0b>] krealloc+0x83/0xd0
[<00000000139aab02>] realloc_array+0x82/0xe2
[<00000000b1ca41d1>] grow_stack_state+0xfb/0x186
[<00000000cd6f36d2>] check_mem_access.cold+0x141/0x1341
[<0000000081780455>] do_check_common+0x5358/0xb350
[<0000000015f6b091>] bpf_check.cold+0xc3/0x29d
[<000000002973c690>] bpf_prog_load+0x13db/0x2240
[<00000000028d1644>] __sys_bpf+0x1605/0x4ce0
[<00000000053f29bd>] __x64_sys_bpf+0x75/0xb0
[<0000000056fedaf5>] do_syscall_64+0x35/0x80
[<000000002bd58261>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: c69431aab6 ("bpf: verifier: Improve function state reallocation")
Reported-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reported-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Bill Wendling <morbo@google.com>
Cc: Lorenz Bauer <oss@lmb.io>
Link: https://lore.kernel.org/bpf/20221029025433.2533810-1-keescook@chromium.org
Dell Vostro 5568 laptop has lis3lv02d, but its i2c address is not known
to the kernel. Add this address.
Output of "cat /sys/devices/platform/lis3lv02d/position" on Dell Vostro
5568 laptop:
- Horizontal: (-18,0,1044)
- Front elevated: (522,-18,1080)
- Left elevated: (-18,-360,1080)
- Upside down: (36,108,-1134)
Signed-off-by: Nam Cao <namcaov@gmail.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
When the I2C controllers are running in DMA mode, it is the DMA engine
that performs the memory accesses rather than the I2C controller. Pass
the DMA engine's struct device pointer to the DMA API to make sure the
correct DMA operations are used.
This fixes an issue where the DMA engine's SMMU stream ID needs to be
misleadingly set for the I2C controllers in device tree.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
In piix4_probe(), the piix4 adapter will be registered in:
piix4_probe()
piix4_add_adapters_sb800() / piix4_add_adapter()
i2c_add_adapter()
Based on the probed device type, piix4_add_adapters_sb800() or single
piix4_add_adapter() will be called.
For the former case, piix4_adapter_count is set as the number of adapters,
while for antoher case it is not set and kept default *zero*.
When piix4 is removed, piix4_remove() removes the adapters added in
piix4_probe(), basing on the piix4_adapter_count value.
Because the count is zero for the single adapter case, the adapter won't
be removed and makes the sources allocated for adapter leaked, such as
the i2c client and device.
These sources can still be accessed by i2c or bus and cause problems.
An easily reproduced case is that if a new adapter is registered, i2c
will get the leaked adapter and try to call smbus_algorithm, which was
already freed:
Triggered by: rmmod i2c_piix4 && modprobe max31730
BUG: unable to handle page fault for address: ffffffffc053d860
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 3752 Comm: modprobe Tainted: G
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:i2c_default_probe (drivers/i2c/i2c-core-base.c:2259) i2c_core
RSP: 0018:ffff888107477710 EFLAGS: 00000246
...
<TASK>
i2c_detect (drivers/i2c/i2c-core-base.c:2302) i2c_core
__process_new_driver (drivers/i2c/i2c-core-base.c:1336) i2c_core
bus_for_each_dev (drivers/base/bus.c:301)
i2c_for_each_dev (drivers/i2c/i2c-core-base.c:1823) i2c_core
i2c_register_driver (drivers/i2c/i2c-core-base.c:1861) i2c_core
do_one_initcall (init/main.c:1296)
do_init_module (kernel/module/main.c:2455)
...
</TASK>
---[ end trace 0000000000000000 ]---
Fix this problem by correctly set piix4_adapter_count as 1 for the
single adapter so it can be normally removed.
Fixes: 528d53a159 ("i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
SCMI Rx channels are optional and they can fail to be setup when not
present but anyway channels setup routines must bail-out on memory errors.
Make channels setup, and related probing, fail when memory errors are
reported on Rx channels.
Fixes: 5c8a47a5a9 ("firmware: arm_scmi: Make scmi core independent of the transport type")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221028140833.280091-4-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
SCMI transports based on shared memory, at start of transmissions, have
to wait for the shared Tx channel area to be eventually freed by the
SCMI platform before accessing the channel. In fact the channel is owned
by the SCMI platform until marked as free by the platform itself and,
as such, cannot be used by the agent until relinquished.
As a consequence a badly misbehaving SCMI platform firmware could lock
the channel indefinitely and make the kernel side SCMI stack loop
forever waiting for such channel to be freed, possibly hanging the
whole boot sequence.
Add a timeout to the existent Tx waiting spin-loop so that, when the
system ends up in this situation, the SCMI stack can at least bail-out,
nosily warn the user, and abort the transmission.
Reported-by: YaxiongTian <iambestgod@outlook.com>
Suggested-by: YaxiongTian <iambestgod@outlook.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Etienne Carriere <etienne.carriere@linaro.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221028140833.280091-3-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Platform drivers .remove callbacks are not supposed to fail and report
errors. Such errors are indeed ignored by the core platform drivers
and the driver unbind process is anyway completed.
The SCMI core platform driver as it is now, instead, bails out reporting
an error in case of an explicit unbind request.
Fix the removal path by adding proper device links between the core SCMI
device and the SCMI protocol devices so that a full SCMI stack unbind is
triggered when the core driver is removed. The remove process does not
bail out anymore on the anomalous conditions triggered by an explicit
unbind but the user is still warned.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221028140833.280091-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Recent changes to the thermal framework has made the trip
points (trips) for thermal zones compulsory, which made
the Ux500 DTS files break validation and also stopped
probing because of similar changes to the code.
Fix this by adding an "outer bounding box": battery thermal
zones should not get warmer than 70 degress, then we will
shut down.
Fixes: 8c59632423 ("dt-bindings: thermal: Fix missing required property")
Fixes: 3fd6d6e2b4 ("thermal/of: Rework the thermal device tree initialization")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-pm@vger.kernel.org
Link: https://lore.kernel.org/r/20221030210854.346662-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX fixes for 6.1:
- Fix imx93-pd driver to release resources when error occurs in probe.
- A series from Ioana Ciornei to add missing clock frequencies for MDIO
controllers on LayerScape SoCs, so that the kernel driver can work
independently from bootloader.
- A series from Li Jun to fix USB power domain setup in i.MX8MM/N device
trees.
- Fix CPLD_Dn pull configuration for MX8Menlo board to avoid interfering
with CPLD power off functionality.
- Fix ctrl_sleep_moci GPIO setup for verdin-imx8mp board.
- Fix DT schema check warnings on uSDHC clocks for imx8-ss-conn device
tree.
- Fix up gpcv2 DT bindings to have an optional `power-domains` property.
- A couple of i.MX93 device tree fixes on S4MU interrupt and gpio-ranges
of GPIO controllers.
- Keep PU regulator on for Quad and QuadPlus based imx6dl-yapp4 boards to
work around a hardware design flaw in supply voltage distribution.
- Fix user push-button GPIO offset on imx6qdl-gw59 boards.
* tag 'imx-fixes-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers
arm64: dts: ls1088a: specify clock frequencies for the MDIO controllers
arm64: dts: lx2160a: specify clock frequencies for the MDIO controllers
soc: imx: imx93-pd: Fix the error handling path of imx93_pd_probe()
arm64: dts: imx93: correct gpio-ranges
arm64: dts: imx93: correct s4mu interrupt names
dt-bindings: power: gpcv2: add power-domains property
arm64: dts: imx8: correct clock order
ARM: dts: imx6dl-yapp4: Do not allow PM to switch PU regulator off on Q/QP
ARM: dts: imx6qdl-gw59{10,13}: fix user pushbutton GPIO offset
arm64: dts: imx8mn: Correct the usb power domain
arm64: dts: imx8mn: remove otg1 power domain dependency on hsio
arm64: dts: imx8mm: correct usb power domains
arm64: dts: imx8mm: remove otg1/2 power domain dependency on hsio
arm64: dts: verdin-imx8mp: fix ctrl_sleep_moci
arm64: dts: imx8mm: Enable CPLD_Dn pull down resistor on MX8Menlo
Link: https://lore.kernel.org/r/20221101031547.GB125525@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
No need to postpone this to the commit release path, since no packets
are walking over this object, this is accessed from control plane only.
This helped uncovered UAF triggered by races with the netlink notifier.
Fixes: 9dd732e0bd ("netfilter: nf_tables: memleak flow rule from commit path")
Reported-by: syzbot+8f747f62763bc6c32916@syzkaller.appspotmail.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
commit release path is invoked via call_rcu and it runs lockless to
release the objects after rcu grace period. The netlink notifier handler
might win race to remove objects that the transaction context is still
referencing from the commit release path.
Call rcu_barrier() to ensure pending rcu callbacks run to completion
if the list of transactions to be destroyed is not empty.
Fixes: 6001a930ce ("netfilter: nftables: introduce table ownership")
Reported-by: syzbot+8f747f62763bc6c32916@syzkaller.appspotmail.com
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The commit 1f9d3d9869 ("ALSA: hda - set intel audio clock to a
proper value") added a number of misleading comments.
There is no ability to detect if an SCF value was set or not, what the
code does is prevent the use of the 6MHz audio clock represented by
the value 0 in LCTL.SCF. Changing the SCF settings does require the
link to be power-cycled, but in all other cases the link is powered
automatically when exiting reset. In other words, the power-cycle is
an exception to the rule that the HDaudio legacy driver does not need
to program SPA/CPA bits.
In addition, the SCF related changes are only relevant for the first
link.
No functionality change, only comment clarifications.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20221031195505.249929-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On 32-bit kernels, 64-bit syscall arguments are split into two
registers. For that to work with syscall wrappers, the prototype of the
syscall must have the argument split so that the wrapper macro properly
unpacks the arguments from pt_regs.
The fanotify_mark() syscall is one such syscall, which already has a
split prototype, guarded behind ARCH_SPLIT_ARG64.
So select ARCH_SPLIT_ARG64 to get that prototype and fix fanotify_mark()
on 32-bit kernels with syscall wrappers.
Note also that fanotify_mark() is the only usage of ARCH_SPLIT_ARG64.
Fixes: 7e92e01b72 ("powerpc: Provide syscall wrapper")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221101034852.2340319-1-mpe@ellerman.id.au
Recently, we got two syzkaller problems because of oversize packet
when napi frags enabled.
One of the problems is because the first seg size of the iov_iter
from user space is very big, it is 2147479538 which is bigger than
the threshold value for bail out early in __alloc_pages(). And
skb->pfmemalloc is true, __kmalloc_reserve() would use pfmemalloc
reserves without __GFP_NOWARN flag. Thus we got a warning as following:
========================================================
WARNING: CPU: 1 PID: 17965 at mm/page_alloc.c:5295 __alloc_pages+0x1308/0x16c4 mm/page_alloc.c:5295
...
Call trace:
__alloc_pages+0x1308/0x16c4 mm/page_alloc.c:5295
__alloc_pages_node include/linux/gfp.h:550 [inline]
alloc_pages_node include/linux/gfp.h:564 [inline]
kmalloc_large_node+0x94/0x350 mm/slub.c:4038
__kmalloc_node_track_caller+0x620/0x8e4 mm/slub.c:4545
__kmalloc_reserve.constprop.0+0x1e4/0x2b0 net/core/skbuff.c:151
pskb_expand_head+0x130/0x8b0 net/core/skbuff.c:1654
__skb_grow include/linux/skbuff.h:2779 [inline]
tun_napi_alloc_frags+0x144/0x610 drivers/net/tun.c:1477
tun_get_user+0x31c/0x2010 drivers/net/tun.c:1835
tun_chr_write_iter+0x98/0x100 drivers/net/tun.c:2036
The other problem is because odd IPv6 packets without NEXTHDR_NONE
extension header and have big packet length, it is 2127925 which is
bigger than ETH_MAX_MTU(65535). After ipv6_gso_pull_exthdrs() in
ipv6_gro_receive(), network_header offset and transport_header offset
are all bigger than U16_MAX. That would trigger skb->network_header
and skb->transport_header overflow error, because they are all '__u16'
type. Eventually, it would affect the value for __skb_push(skb, value),
and make it be a big value. After __skb_push() in ipv6_gro_receive(),
skb->data would less than skb->head, an out of bounds memory bug occurred.
That would trigger the problem as following:
==================================================================
BUG: KASAN: use-after-free in eth_type_trans+0x100/0x260
...
Call trace:
dump_backtrace+0xd8/0x130
show_stack+0x1c/0x50
dump_stack_lvl+0x64/0x7c
print_address_description.constprop.0+0xbc/0x2e8
print_report+0x100/0x1e4
kasan_report+0x80/0x120
__asan_load8+0x78/0xa0
eth_type_trans+0x100/0x260
napi_gro_frags+0x164/0x550
tun_get_user+0xda4/0x1270
tun_chr_write_iter+0x74/0x130
do_iter_readv_writev+0x130/0x1ec
do_iter_write+0xbc/0x1e0
vfs_writev+0x13c/0x26c
To fix the problems, restrict the packet size less than
(ETH_MAX_MTU - NET_SKB_PAD - NET_IP_ALIGN) which has considered reserved
skb space in napi_alloc_skb() because transport_header is an offset from
skb->head. Add len check in tun_napi_alloc_frags() simply.
Fixes: 90e33d4594 ("tun: enable napi_gro_frags() for TUN/TAP driver")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221029094101.1653855-1-william.xuanziyang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
blk_mq_flush_plug_list() empties ->mq_list and request we'd peeked there
before that call is gone; in any case, we are not dealing with a mix
of requests for different queues now - there's no requests left in the
plug.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With the introduction of syscall wrappers all wrappers for syscalls with
64-bit arguments must be handled specially, not only those that have
unaligned 64-bit arguments. This left out the fallocate() and
sync_file_range2() syscalls.
Fixes: 7e92e01b72 ("powerpc: Provide syscall wrapper")
Fixes: e237506238 ("powerpc/32: fix syscall wrappers with 64-bit arguments of unaligned register-pairs")
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/87mt9cxd6g.fsf_-_@igel.home
The macros are defined backwards.
This affects the following compat syscalls:
- compat_sys_truncate64()
- compat_sys_ftruncate64()
- compat_sys_fallocate()
- compat_sys_sync_file_range()
- compat_sys_fadvise64_64()
- compat_sys_readahead()
- compat_sys_pread64()
- compat_sys_pwrite64()
Fixes: 43d5de2b67 ("asm-generic: compat: Support BE for long long args in 32-bit ABIs")
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
[mpe: Add list of affected syscalls]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/871qqoyvni.fsf_-_@igel.home
Pull btrfs fixes from David Sterba:
"A few more fixes and regression fixes:
- fix a corner case when handling tree-mod-log chagnes in reallocated
notes
- fix crash on raid0 filesystems created with <5.4 mkfs.btrfs that
could lead to division by zero
- add missing super block checksum verification after thawing
filesystem
- handle one more case in send when dealing with orphan files
- fix parameter type mismatch for generation when reading dentry
- improved error handling in raid56 code
- better struct bio packing after recent cleanups"
* tag 'for-6.1-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: don't use btrfs_chunk::sub_stripes from disk
btrfs: fix type of parameter generation in btrfs_get_dentry
btrfs: send: fix send failure of a subcase of orphan inodes
btrfs: make thaw time super block check to also verify checksum
btrfs: fix tree mod log mishandling of reallocated nodes
btrfs: reorder btrfs_bio for better packing
btrfs: raid56: avoid double freeing for rbio if full_stripe_write() failed
btrfs: raid56: properly handle the error when unable to find the missing stripe
Pull LSM fix from Paul Moore:
"A single patch to the capabilities code to fix a potential memory leak
in the xattr allocation error handling"
* tag 'lsm-pr-20221031' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
capabilities: fix potential memleak on error path from vfs_getxattr_alloc()
There are two capabilities related to ring-based dirty page tracking:
KVM_CAP_DIRTY_LOG_RING and KVM_CAP_DIRTY_LOG_RING_ACQ_REL. Both are
supported by x86. However, arm64 supports KVM_CAP_DIRTY_LOG_RING_ACQ_REL
only when the feature is supported on arm64. The userspace doesn't have
to enable the advertised capability, meaning KVM_CAP_DIRTY_LOG_RING can
be enabled on arm64 by userspace and it's wrong.
Fix it by double checking if the capability has been advertised prior to
enabling it. It's rejected to enable the capability if it hasn't been
advertised.
Fixes: 17601bfed9 ("KVM: Add KVM_CAP_DIRTY_LOG_RING_ACQ_REL capability and config option")
Reported-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221031003621.164306-4-gshan@redhat.com
xfs: fix various problems with log intent item recovery
Starting with 6.1-rc1, CONFIG_FORTIFY_SOURCE checks became smart enough
to detect memcpy() callers that copy beyond what seems to be the end of
a struct. Unfortunately, gcc has a bug wherein it cannot reliably
compute the size of a struct containing another struct containing a flex
array at the end. This is the case with the xfs log item format
structures, which means that -rc1 starts complaining all over the place.
Fix these problems by memcpying the struct head and the flex arrays
separately. Although it's tempting to use the FLEX_ARRAY macros, the
structs involved are part of the ondisk log format. Some day we're
going to want to make the ondisk log contents endian-safe, which means
that we will have to stop using memcpy entirely.
While we're at it, fix some deficiencies in the validation of recovered
log intent items -- if the size of the recovery buffer is not even large
enough to cover the flex array record count in the head, we should abort
the recovery of that item immediately.
The last patch of this series changes the EFI/EFD sizeof functions names
and behaviors to be consistent with the similarly named sizeof helpers
for other log intent items.
v2: fix more inadequate log intent done recovery validation and dump
corrupt recovered items
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
* tag 'fix-log-recovery-misuse-6.1_2022-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: dump corrupt recovered log intent items to dmesg consistently
xfs: actually abort log recovery on corrupt intent-done log items
xfs: refactor all the EFI/EFD log item sizeof logic
xfs: fix memcpy fortify errors in EFI log format copying
xfs: fix memcpy fortify errors in RUI log format copying
xfs: fix memcpy fortify errors in CUI log format copying
xfs: fix memcpy fortify errors in BUI log format copying
xfs: fix validation in attr log item recovery
We've been (ab)using XFS_REFC_COW_START as both an integer quantity and
a bit flag, even though it's *only* a bit flag. Rename the variable to
reflect its nature and update the cast target since we're not supposed
to be comparing it to xfs_agblock_t now.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
We're supposed to initialize the list head of an object before adding it
to another list. Fix that, and stop using the kmem_{alloc,free} calls
from the Irix days.
Fixes: 174edb0e46 ("xfs: store in-progress CoW allocations in the refcount btree")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
As we've seen, refcount records use the upper bit of the rc_startblock
field to ensure that all the refcount records are at the right side of
the refcount btree. This works because an AG is never allowed to have
more than (1U << 31) blocks in it. If we ever encounter a filesystem
claiming to have that many blocks, we absolutely do not want reflink
touching it at all.
However, this test at the start of xfs_refcount_recover_cow_leftovers is
slightly incorrect -- it /should/ be checking that agblocks isn't larger
than the XFS_MAX_CRC_AG_BLOCKS constant, and it should check that the
constant is never large enough to conflict with that CoW flag.
Note that the V5 superblock verifier has not historically rejected
filesystems where agblocks >= XFS_MAX_CRC_AG_BLOCKS, which is why this
ended up in the COW recovery routine.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Now that we've separated the startblock and CoW/shared extent domain in
the incore refcount record structure, check the domain whenever we
retrieve a record to ensure that it's still in the domain that we want.
Depending on the circumstances, a change in domain either means we're
done processing or that we've found a corruption and need to fail out.
The refcount check in xchk_xref_is_cow_staging is redundant since
_get_rec has done that for a long time now, so we can get rid of it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Now that we have an explicit enum for shared and CoW staging extents, we
can get rid of the old FIND_RCEXT flags. Omit a couple of conversions
that disappear in the next patches.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Create a helper function to ensure that CoW staging extent records have
a single refcount and that shared extent records have more than 1
refcount. We'll put this to more use in the next patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Now that we've broken out the startblock and shared/cow domain in the
incore refcount extent record structure, update the tracepoints to
report the domain.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Just prior to committing the reflink code into upstream, the xfs
maintainer at the time requested that I find a way to shard the refcount
records into two domains -- one for records tracking shared extents, and
a second for tracking CoW staging extents. The idea here was to
minimize mount time CoW reclamation by pushing all the CoW records to
the right edge of the keyspace, and it was accomplished by setting the
upper bit in rc_startblock. We don't allow AGs to have more than 2^31
blocks, so the bit was free.
Unfortunately, this was a very late addition to the codebase, so most of
the refcount record processing code still treats rc_startblock as a u32
and pays no attention to whether or not the upper bit (the cow flag) is
set. This is a weakness is theoretically exploitable, since we're not
fully validating the incoming metadata records.
Fuzzing demonstrates practical exploits of this weakness. If the cow
flag of a node block key record is corrupted, a lookup operation can go
to the wrong record block and start returning records from the wrong
cow/shared domain. This causes the math to go all wrong (since cow
domain is still implicit in the upper bit of rc_startblock) and we can
crash the kernel by tricking xfs into jumping into a nonexistent AG and
tripping over xfs_perag_get(mp, <nonexistent AG>) returning NULL.
To fix this, start tracking the domain as an explicit part of struct
xfs_refcount_irec, adjust all refcount functions to check the domain
of a returned record, and alter the function definitions to accept them
where necessary.
Found by fuzzing keys[2].cowflag = add in xfs/464.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Consolidate the open-coded xfs_refcount_irec fields into an actual
struct and use the existing _btrec_to_irec to decode the ondisk record.
This will reduce code churn in the next patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
If log recovery decides that an intent item is corrupt and wants to
abort the mount, capture a hexdump of the corrupt log item in the kernel
log for further analysis. Some of the log item code already did this,
so we're fixing the rest to do it consistently.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Structure definitions for incore objects do not belong in the ondisk
format header. Move them to the incore types header where they belong.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
If log recovery picks up intent-done log items that are not of the
correct size it needs to abort recovery and fail the mount. Debug
assertions are not good enough.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
If we're in the middle of a deferred refcount operation and decide to
roll the transaction to avoid overflowing the transaction space, we need
to check the new agbno/aglen parameters that we're about to record in
the new intent. Specifically, we need to check that the new extent is
completely within the filesystem, and that continuation does not put us
into a different AG.
If the keys of a node block are wrong, the lookup to resume an
xfs_refcount_adjust_extents operation can put us into the wrong record
block. If this happens, we might not find that we run out of aglen at
an exact record boundary, which will cause the loop control to do the
wrong thing.
The previous patch should take care of that problem, but let's add this
extra sanity check to stop corruption problems sooner than later.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Refactor all the open-coded sizeof logic for EFI/EFD log item and log
format structures into common helper functions whose names reflect the
struct names.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Create a predicate function to verify that a given agbno/blockcount pair
fit entirely within a single allocation group and don't suffer
mathematical overflows. Refactor the existng open-coded logic; we're
going to add more calls to this function in the next patch.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Starting in 6.1, CONFIG_FORTIFY_SOURCE checks the length parameter of
memcpy. Since we're already fixing problems with BUI item copying, we
should fix it everything else.
An extra difficulty here is that the ef[id]_extents arrays are declared
as single-element arrays. This is not the convention for flex arrays in
the modern kernel, and it causes all manner of problems with static
checking tools, since they often cannot tell the difference between a
single element array and a flex array.
So for starters, change those array[1] declarations to array[]
declarations to signal that they are proper flex arrays and adjust all
the "size-1" expressions to fit the new declaration style.
Next, refactor the xfs_efi_copy_format function to handle the copying of
the head and the flex array members separately. While we're at it, fix
a minor validation deficiency in the recovery function.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Prior to calling xfs_refcount_adjust_extents, we trimmed agbno/aglen
such that the end of the range would not be in the middle of a refcount
record. If this is no longer the case, something is seriously wrong
with the btree. Bail out with a corruption error.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Starting in 6.1, CONFIG_FORTIFY_SOURCE checks the length parameter of
memcpy. Since we're already fixing problems with BUI item copying, we
should fix it everything else.
Refactor the xfs_rui_copy_format function to handle the copying of the
head and the flex array members separately. While we're at it, fix a
minor validation deficiency in the recovery function.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Starting in 6.1, CONFIG_FORTIFY_SOURCE checks the length parameter of
memcpy. Since we're already fixing problems with BUI item copying, we
should fix it everything else.
Refactor the xfs_cui_copy_format function to handle the copying of the
head and the flex array members separately. While we're at it, fix a
minor validation deficiency in the recovery function.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Starting in 6.1, CONFIG_FORTIFY_SOURCE checks the length parameter of
memcpy. Unfortunately, it doesn't handle flex arrays correctly:
------------[ cut here ]------------
memcpy: detected field-spanning write (size 48) of single field "dst_bui_fmt" at fs/xfs/xfs_bmap_item.c:628 (size 16)
Fix this by refactoring the xfs_bui_copy_format function to handle the
copying of the head and the flex array members separately. While we're
at it, fix a minor validation deficiency in the recovery function.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Before we start fixing all the complaints about memcpy'ing log items
around, let's fix some inadequate validation in the xattr log item
recovery code and get rid of the (now trivial) copy_format function.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
When doing a direct IO write using a iocb with nowait and dsync set, we
end up not syncing the file once the write completes.
This is because we tell iomap to not call generic_write_sync(), which
would result in calling btrfs_sync_file(), in order to avoid a deadlock
since iomap can call it while we are holding the inode's lock and
btrfs_sync_file() needs to acquire the inode's lock. The deadlock happens
only if the write happens synchronously, when iomap_dio_rw() calls
iomap_dio_complete() before it returns. Instead we do the sync ourselves
at btrfs_do_write_iter().
For a nowait write however we can end up not doing the sync ourselves at
at btrfs_do_write_iter() because the write could have been queued, and
therefore we get -EIOCBQUEUED returned from iomap in such case. That makes
us skip the sync call at btrfs_do_write_iter(), as we don't do it for
any error returned from btrfs_direct_write(). We can't simply do the call
even if -EIOCBQUEUED is returned, since that would block the task waiting
for IO, both for the data since there are bios still in progress as well
as potentially blocking when joining a log transaction and when syncing
the log (writing log trees, super blocks, etc).
So let iomap do the sync call itself and in order to avoid deadlocks for
the case of synchronous writes (without nowait), use __iomap_dio_rw() and
have ourselves call iomap_dio_complete() after unlocking the inode.
A test case will later be sent for fstests, after this is fixed in Linus'
tree.
Fixes: 51bd9563b6 ("btrfs: fix deadlock due to page faults during direct IO reads and writes")
Reported-by: Марк Коренберг <socketpair@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAEmTpZGRKbzc16fWPvxbr6AfFsQoLmz-Lcg-7OgJOZDboJ+SGQ@mail.gmail.com/
CC: stable@vger.kernel.org # 6.0+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The kernel robot complained about this:
>> fs/xfs/xfs_file.c:1266:31: sparse: sparse: incorrect type in return expression (different base types) @@ expected int @@ got restricted vm_fault_t @@
fs/xfs/xfs_file.c:1266:31: sparse: expected int
fs/xfs/xfs_file.c:1266:31: sparse: got restricted vm_fault_t
fs/xfs/xfs_file.c:1314:21: sparse: sparse: incorrect type in assignment (different base types) @@ expected restricted vm_fault_t [usertype] ret @@ got int @@
fs/xfs/xfs_file.c:1314:21: sparse: expected restricted vm_fault_t [usertype] ret
fs/xfs/xfs_file.c:1314:21: sparse: got int
Fix the incorrect return type for these two functions.
While we're at it, make the !fsdax version return VM_FAULT_SIGBUS
because a zero return value will cause some callers to try to lock
vmf->page, which we never set here.
Fixes: ea6c49b784 ("xfs: support CoW in fsdax mode")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Avoid that the hardware path is shown twice in the kernel log, and clean
up the output of the version numbers to show up in the same order as
they are listed in the hardware database in the hardware.c file.
Additionally, optimize the memory footprint of the hardware database
and mark some code as init code.
Fixes: cab56b51ec ("parisc: Fix device names in /proc/iomem")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v4.9+
There is a kmemleak caused by modprobe null_blk.ko
unreferenced object 0xffff8881acb1f000 (size 1024):
comm "modprobe", pid 836, jiffies 4294971190 (age 27.068s)
hex dump (first 32 bytes):
00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N..........
ff ff ff ff ff ff ff ff 00 53 99 9e ff ff ff ff .........S......
backtrace:
[<000000004a10c249>] kmalloc_node_trace+0x22/0x60
[<00000000648f7950>] blk_mq_alloc_and_init_hctx+0x289/0x350
[<00000000af06de0e>] blk_mq_realloc_hw_ctxs+0x2fe/0x3d0
[<00000000e00c1872>] blk_mq_init_allocated_queue+0x48c/0x1440
[<00000000d16b4e68>] __blk_mq_alloc_disk+0xc8/0x1c0
[<00000000d10c98c3>] 0xffffffffc450d69d
[<00000000b9299f48>] 0xffffffffc4538392
[<0000000061c39ed6>] do_one_initcall+0xd0/0x4f0
[<00000000b389383b>] do_init_module+0x1a4/0x680
[<0000000087cf3542>] load_module+0x6249/0x7110
[<00000000beba61b8>] __do_sys_finit_module+0x140/0x200
[<00000000fdcfff51>] do_syscall_64+0x35/0x80
[<000000003c0f1f71>] entry_SYSCALL_64_after_hwframe+0x46/0xb0
That is because q->ma_ops is set to NULL before blk_release_queue is
called.
blk_mq_init_queue_data
blk_mq_init_allocated_queue
blk_mq_realloc_hw_ctxs
for (i = 0; i < set->nr_hw_queues; i++) {
old_hctx = xa_load(&q->hctx_table, i);
if (!blk_mq_alloc_and_init_hctx(.., i, ..)) [1]
if (!old_hctx)
break;
xa_for_each_start(&q->hctx_table, j, hctx, j)
blk_mq_exit_hctx(q, set, hctx, j); [2]
if (!q->nr_hw_queues) [3]
goto err_hctxs;
err_exit:
q->mq_ops = NULL; [4]
blk_put_queue
blk_release_queue
if (queue_is_mq(q)) [5]
blk_mq_release(q);
[1]: blk_mq_alloc_and_init_hctx failed at i != 0.
[2]: The hctxs allocated by [1] are moved to q->unused_hctx_list and
will be cleaned up in blk_mq_release.
[3]: q->nr_hw_queues is 0.
[4]: Set q->mq_ops to NULL.
[5]: queue_is_mq returns false due to [4]. And blk_mq_release
will not be called. The hctxs in q->unused_hctx_list are leaked.
To fix it, call blk_release_queue in exception path.
Fixes: 2f8f1336a4 ("blk-mq: always free hctx after request queue is freed")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Chen Jun <chenjun102@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20221031031242.94107-1-chenjun102@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
kmemleak reported memory leaks in device_add_disk():
kmemleak: 3 new suspected memory leaks
unreferenced object 0xffff88800f420800 (size 512):
comm "modprobe", pid 4275, jiffies 4295639067 (age 223.512s)
hex dump (first 32 bytes):
04 00 00 00 08 00 00 00 01 00 00 00 00 00 00 00 ................
00 e1 f5 05 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000d3662699>] kmalloc_trace+0x26/0x60
[<00000000edc7aadc>] wbt_init+0x50/0x6f0
[<0000000069601d16>] wbt_enable_default+0x157/0x1c0
[<0000000028fc393f>] blk_register_queue+0x2a4/0x420
[<000000007345a042>] device_add_disk+0x6fd/0xe40
[<0000000060e6aab0>] nbd_dev_add+0x828/0xbf0 [nbd]
...
It is because the memory allocated in wbt_enable_default() is not
released in device_add_disk() error path.
Normally, these memory are freed in:
del_gendisk()
rq_qos_exit()
rqos->ops->exit(rqos);
wbt_exit()
So rq_qos_exit() is called to free the rq_wb memory for wbt_init().
However in the error path of device_add_disk(), only
blk_unregister_queue() is called and make rq_wb memory leaked.
Add rq_qos_exit() to the error path to fix it.
Fixes: 83cbce9574 ("block: add error handling for device_add_disk / add_disk")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221029071355.35462-1-chenzhongjin@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring cmd is supposed to be used in ubq daemon context mainly,
and we should try to avoid to touch it in ublk io submission context,
otherwise this data could become shared between the two contexts,
and performance is hurt.
So link request into one per-queue list, and use same batching policy
of io_uring command, just avoid to touch ucmd in blk-mq io context.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Link: https://lore.kernel.org/r/20221029010432.598367-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 7e963fb2a3 ("spi: mediatek: add ipm design support
for MT7986") makes a mistake on package dividing operation
(one change is missing), need to fix it.
Background:
Ipm design is expanding the HW capability of dma (adjust package
length from 1KB to 64KB), and using "dev_comp->ipm_support" flag
to indicate it.
Issue description:
Ipm support patch (said above) is missing to handle remainder at
package dividing operation.
One case, a transmission length is 65KB, is will divide to 1K
(package length) * 65(package loop) in non-ipm desgin case, and
will divide to 64K(package length) * 1(package loop) + 1K(remainder)
in ipm design case. And the 1K remainder will be lost with the
current SW flow, and the transmission will be failure.
So, it should be fixed.
Solution:
Add "ipm_design" flag in function "mtk_spi_get_mult_delta()" to
indicate HW capability, and modify the parameters corespondingly.
fixes: 7e963fb2a3 ("spi: mediatek: add ipm design support for MT7986")
Signed-off-by: zhichao.liu <zhichao.liu@mediatek.com>
Link: https://lore.kernel.org/r/20221021091653.18297-1-zhichao.liu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
swiotlb_max_segment used to return either the maximum size that swiotlb
could bounce, or for Xen PV PAGE_SIZE even if swiotlb could bounce buffer
larger mappings. This made i915 on Xen PV work as it bypasses the
coherency aspect of the DMA API and can't cope with bounce buffering
and this avoided bounce buffering for the Xen/PV case.
So instead of adding this hack back, check for Xen/PV directly in i915
for the Xen case and otherwise use the proper DMA API helper to query
the maximum mapping size.
Replace swiotlb_max_segment() calls with dma_max_mapping_size().
In i915_gem_object_get_pages_internal() no longer consider max_segment
only if CONFIG_SWIOTLB is enabled. There can be other (iommu related)
causes of specific max segment sizes.
Fixes: a2daa27c0c ("swiotlb: simplify swiotlb_max_segment")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
[hch: added the Xen hack, rewrote the changelog]
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221020110308.1582518-1-hch@lst.de
(cherry picked from commit 78a07fe777)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Accessing the TypeC DKL PHY registers during modeset-commit,
-verification, DP link-retraining and AUX power well toggling is racy
due to these code paths being concurrent and the PHY register bank
selection register (HIP_INDEX_REG) being shared between PHY instances
(aka TC ports) and the bank selection being not atomic wrt. the actual
PHY register access.
Add the required locking around each PHY register bank selection->
register access sequence.
Kudos to Ville for noticing the race conditions.
v2:
- Add the DKL PHY register accessors to intel_dkl_phy.[ch]. (Jani)
- Make the DKL_REG_TC_PORT macro independent of PHY internals.
- Move initing the DKL PHY lock to a more logical place.
v3:
- Fix parameter reuse in the DKL_REG_TC_PORT definition.
- Document the usage of phy_lock.
v4:
- Fix adding TC_PORT_1 offset in the DKL_REG_TC_PORT definition.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: <stable@vger.kernel.org> # v5.5+
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221025114457.2191004-1-imre.deak@intel.com
(cherry picked from commit 89cb0ba4ce)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
We can't use "skb" again after passing it to qdisc_enqueue(). This is
basically identical to commit 2f09707d0c ("sch_sfb: Also store skb
len before calling child enqueue").
Fixes: d7f4f332f0 ("sch_red: update backlog as well")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shifting signed 32-bit value by 31 bits is undefined, so changing
significant bit to unsigned. The UBSAN warning calltrace like below:
UBSAN: shift-out-of-bounds in kernel/auditfilter.c:179:23
left shift of 1 by 31 places cannot be represented in type 'int'
Call Trace:
<TASK>
dump_stack_lvl+0x7d/0xa5
dump_stack+0x15/0x1b
ubsan_epilogue+0xe/0x4e
__ubsan_handle_shift_out_of_bounds+0x1e7/0x20c
audit_register_class+0x9d/0x137
audit_classes_init+0x4d/0xb8
do_one_initcall+0x76/0x430
kernel_init_freeable+0x3b3/0x422
kernel_init+0x24/0x1e0
ret_from_fork+0x1f/0x30
</TASK>
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
[PM: remove bad 'Fixes' tag as issue predates git, added in v2.6.6-rc1]
Signed-off-by: Paul Moore <paul@paul-moore.com>
If devm_platform_ioremap_resource() fails, it never return
NULL pointer, replace the check with IS_ERR().
Fixes: 57bf0f5a16 ("ARM: pxa: use pdev resource for palmld mmio")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Clang gives a warning when compiling pata_legacy.c with 'make W=1' about
the 'rt' local variable in pdc20230_set_piomode() being set but unused.
Quite obviously, there is an outb() call missing to write back the updated
variable. Moreover, checking the docs by Petr Soucek revealed that bitwise
AND should have been done with a negated timing mask and the master/slave
timing masks were swapped while updating...
Fixes: 669a5db411 ("[libata] Add a bunch of PATA drivers.")
Reported-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
The ndo_start_xmit() method must not free skb when returning
NETDEV_TX_BUSY, since caller is going to requeue freed skb.
Fix it by returning NETDEV_TX_OK in case of dma_map_single() fails.
Fixes: 79f339125e ("net: fec: Add software TSO support")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drm_fb_build_fourcc_list() currently returns all emulated formats
unconditionally as long as the native format is among them, even though
not all combinations have conversion helpers. Although the list is
arguably provided to userspace in precedence order, userspace can pick
something out-of-order (and thus break when it shouldn't), or simply
only support a format that is unsupported (and thus think it can work,
which results in the appearance of a hang as FB blits fail later on,
instead of the initialization error you'd expect in this case).
Add checks to filter the list of emulated formats to only those
supported for conversion to the native format. This presumes that there
is a single native format (only the first is checked, if there are
multiple). Refactoring this API to drop the native list or support it
properly (by returning the appropriate emulated->native mapping table)
is left for a future patch.
The simpledrm driver is left as-is with a full table of emulated
formats. This keeps all currently working conversions available and
drops all the broken ones (i.e. this a strict bugfix patch, adding no
new supported formats nor removing any actually working ones). In order
to avoid proliferation of emulated formats, future drivers should
advertise only XRGB8888 as the sole emulated format (since some
userspace assumes its presence).
This fixes a real user regression where the ?RGB2101010 support commit
started advertising it unconditionally where not supported, and KWin
decided to start to use it over the native format and broke, but also
the fixes the spurious RGB565/RGB888 formats which have been wrongly
unconditionally advertised since the dawn of simpledrm.
Fixes: 6ea966fca0 ("drm/simpledrm: Add [AX]RGB2101010 formats")
Fixes: 11e8f5fd22 ("drm: Add simpledrm driver")
Cc: stable@vger.kernel.org
Signed-off-by: Hector Martin <marcan@marcan.st>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221027135711.24425-1-marcan@marcan.st
There's a build failure for Book3E without AltiVec:
Error: cc1: error: AltiVec not supported in this target
make[6]: *** [/linux/scripts/Makefile.build:250:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/display_mode_lib.o] Error 1
This happens because the amdgpu build is only gated by
PPC_LONG_DOUBLE_128, but that symbol can be enabled even though AltiVec
is disabled.
The only user of PPC_LONG_DOUBLE_128 is amdgpu, so just add a dependency
on AltiVec to that symbol to fix the build.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20221027125626.1383092-1-mpe@ellerman.id.au
Merge rc2 into our fixes branch, which was based on rc1 but wasn't
merged until rc3, so that for the remainder of the release our fixes
branch will be based on rc2 for the purposes of resolving conflicts with
other trees (if necessary).
Shang XiaoJing says:
====================
nfc: Fix potential memory leak of skb
There are 6 kinds of send functions can be called by nci_send_frame():
virtual_nci_send(),
fdp_nci_send(),
nxp_nci_send(),
s3fwrn5_nci_send(),
nfcmrvl_nci_send(),
st_nci_send();
1. virtual_nci_send() will memleak the skb, and has been fixed before.
2. fdp_nci_send() won't free the skb no matter whether write() succeed.
3-4. nxp_nci_send() and s3fwrn5_nci_send() will only free the skb when
write() failed, however write() will not free the skb by itself for when
succeeds.
5. nfcmrvl_nci_send() will call nfcmrvl_XXX_nci_send(), where some of
them will free the skb, but nfcmrvl_i2c_nci_send() only free the skb
when i2c_master_send() return >=0, and memleak will happen when
i2c_master_send() failed in nfcmrvl_i2c_nci_send().
6. st_nci_send() will queue the skb into other list and finally be
freed.
Fix the potential memory leak of skb.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
nfcmrvl_i2c_nci_send() will be called by nfcmrvl_nci_send(), and skb
should be freed in nfcmrvl_i2c_nci_send(). However, nfcmrvl_nci_send()
will only free skb when i2c_master_send() return >=0, which means skb
will memleak when i2c_master_send() failed. Free skb no matter whether
i2c_master_send() succeeds.
Fixes: b5b3e23e4c ("NFC: nfcmrvl: add i2c driver")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
s3fwrn5_nci_send() will call s3fwrn5_i2c_write() or s3fwrn82_uart_write(),
and free the skb if write() failed. However, even if the write() run
succeeds, the skb will not be freed in write(). As the result, the skb
will memleak. s3fwrn5_nci_send() should also free the skb when write()
succeeds.
Fixes: c04c674fad ("nfc: s3fwrn5: Add driver for Samsung S3FWRN5 NFC Chip")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
nxp_nci_send() will call nxp_nci_i2c_write(), and only free skb when
nxp_nci_i2c_write() failed. However, even if the nxp_nci_i2c_write()
run succeeds, the skb will not be freed in nxp_nci_i2c_write(). As the
result, the skb will memleak. nxp_nci_send() should also free the skb
when nxp_nci_i2c_write() succeeds.
Fixes: dece45855a ("NFC: nxp-nci: Add support for NXP NCI chips")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
fdp_nci_send() will call fdp_nci_i2c_write that will not free skb in
the function. As a result, when fdp_nci_i2c_write() finished, the skb
will memleak. fdp_nci_send() should free skb after fdp_nci_i2c_write()
finished.
Fixes: a06347c04c ("NFC: Add Intel Fields Peak NFC solution driver")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix warnings and enable Wall.
pidfd_wait.c: In function ‘wait_nonblock’:
pidfd_wait.c:150:13: warning: unused variable ‘status’ [-Wunused-variable]
150 | int pidfd, status = 0;
| ^~~~~~
...
pidfd_test.c: In function ‘child_poll_exec_test’:
pidfd_test.c:438:1: warning: no return statement in function returning non-void [-Wreturn-type]
438 | }
| ^
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
v2: fix mistake assignment to pidfd
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
0Day/LKP observed that the kselftest blocks forever since one of the
pidfd_wait doesn't terminate in 1 of 30 runs. After digging into
the source, we found that it blocks at:
ASSERT_EQ(sys_waitid(P_PIDFD, pidfd, &info, WCONTINUED, NULL), 0);
wait_states has below testing flow:
CHILD PARENT
---------------+--------------
1 STOP itself
2 WAIT for CHILD STOPPED
3 SIGNAL CHILD to CONT
4 CONT
5 STOP itself
5' WAIT for CHILD CONT
6 WAIT for CHILD STOPPED
The problem is that the kernel cannot ensure the order of 5 and 5', once
5 goes first, the test will fail.
we can reproduce it by:
$ while true; do make run_tests -C pidfd; done
Introduce a blocking read in child process to make sure the parent can
check its WCONTINUED.
CC: Philip Li <philip.li@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The vop2 driver needs to explicitly disable the planes if the crtc is
disabled. Unless the planes are explicitly disabled, the address of the
last framebuffer is kept in the registers of the VOP2. When re-enabling
the encoder after it has been disabled by the driver, the VOP2 will
start and read the framebuffer that has been freed but is still pointed
to by the register. The iommu will catch these read accesses and print
errors.
Explicitly disable the planes when the crtc is disabled to reset the
registers.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221028095206.2136601-3-m.tretter@pengutronix.de
If the vop2_plane_atomic_disable function is called with NULL as a
state, accessing the old_pstate runs into a null pointer exception.
However, the drm_atomic_helper_disable_planes_on_crtc function calls the
atomic_disable callback with state NULL.
Allow to disable a plane without passing a plane state by checking the
old_pstate only if a state is passed.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221028095206.2136601-2-m.tretter@pengutronix.de
When switching to the generic fbdev infrastructure, it was missed that
framebuffers were created with the alloc_kmap parameter to
rockchip_gem_create_object() set to true. The generic infrastructure
calls this via the .dumb_create() driver operation and thus creates a
buffer without an associated kmap.
alloc_kmap only makes a difference on devices without an IOMMU, but when
it is missing rockchip_gem_prime_vmap() fails and the framebuffer cannot
be used.
Detect the case where a buffer is being allocated for the framebuffer
and ensure a kernel mapping is created in this case.
Fixes: 24af7c34b2 ("drm/rockchip: use generic fbdev setup")
Reported-by: Johan Jonker <jbx6244@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221020181248.2497065-1-john@metanate.com
If we fail to attach the first time (especially: EPROBE_DEFER), we fail
to clean up 'usage_mode', and thus will fail to attach on any subsequent
attempts, with "dsi controller already in use".
Re-set to DW_DSI_USAGE_IDLE on attach failure.
This is especially common to hit when enabling asynchronous probe on a
duel-DSI system (such as RK3399 Gru/Scarlet), such that we're more
likely to fail dw_mipi_dsi_rockchip_find_second() the first time.
Fixes: 71f68fe7f1 ("drm/rockchip: dsi: add ability to work as a phy instead of full dsi")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20221019170255.1.Ia68dfb27b835d31d22bfe23812baf366ee1c6eac@changeid
When the avdd-0v9 or avdd-1v8 supply are not yet available, EPROBE_DEFER
is returned by rockchip_hdmi_parse_dt(). This causes the following error
message to be printed multiple times:
dwhdmi-rockchip fe0a0000.hdmi: [drm:dw_hdmi_rockchip_bind [rockchipdrm]] *ERROR* Unable to parse OF data
Fix that by not printing the message when rockchip_hdmi_parse_dt()
returns -EPROBE_DEFER.
Fixes: ca80c4eb4b ("drm/rockchip: dw_hdmi: add regulator support")
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220926203752.5430-1-aurelien@aurel32.net
Up until now, the external MDIO controller frequency values relied
either on the default ones out of reset or on those setup by u-boot.
Let's just properly specify the MDC frequency in the DTS so that even
without u-boot's intervention Linux can drive the MDIO bus.
Fixes: 0420dde30a ("arm64: dts: ls208xa: add the external MDIO nodes")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Up until now, the external MDIO controller frequency values relied
either on the default ones out of reset or on those setup by u-boot.
Let's just properly specify the MDC frequency in the DTS so that even
without u-boot's intervention Linux can drive the MDIO bus.
Fixes: bbe75af7b0 ("arm64: dts: ls1088a: add external MDIO device nodes")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Up until now, the external MDIO controller frequency values relied
either on the default ones out of reset or on those setup by u-boot.
Let's just properly specify the MDC frequency in the DTS so that even
without u-boot's intervention Linux can drive the MDIO bus.
Fixes: 6e1b8fae89 ("arm64: dts: lx2160a: add emdio1 node")
Fixes: 5705b9dcda ("arm64: dts: lx2160a: add emdio2 node")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In imx93_pd_probe(); if an error occurs, some resources need to be released
as done in the remove function.
Fixes: 0a0f7cc25d ("soc: imx: add i.MX93 SRC power domain driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Per binding doc, interrupt names should be tx and rx.
Fixes: 0dfb380d24 ("arm64: dts: imx93: add s4 mu node")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Some pgc power-domain requires a parent power domain, so
add an optional power-domains property, otherwise there will be
dt check warning:
gpc@303a0000: pgc:power-domain@1: 'power-domains' does not match
any of the regexes: 'pinctrl-[0-9]+'
Fixes: 30af8513bd ("dt-bindings: power: add defines for i.MX8MM power domains")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Per bindings/mmc/fsl-imx-esdhc.yaml, the clock order is ipg, ahb, per,
otherwise warning: "
mmc@5b020000: clock-names:1: 'ahb' was expected
mmc@5b020000: clock-names:2: 'per' was expected "
Fixes: 16c4ea7501 ("arm64: dts: imx8: switch to new lpcg clock binding")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fix our design flaw in supply voltage distribution on the Quad and QuadPlus
based boards.
The problem is that we supply the SoC cache (VDD_CACHE_CAP) from VDD_PU
instead of VDD_SOC. The VDD_PU internal regulator can be disabled by PM
if VPU or GPU is not used. If that happens the system freezes. To prevent
that configure the reg_pu regulator to be always on.
Fixes: 0de4ab81ab ("ARM: dts: imx6dl-yapp4: Add Y Soft IOTA Crux/Crux+ board")
Cc: petrben@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Petr Benes <petr.benes@ysoft.com>
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GW5910 and GW5913 have a user pushbutton that is tied to the
Gateworks System Controller GPIO offset 2. Fix the invalid offset of 0.
Fixes: 64bf0a0af1 ("ARM: dts: imx6qdl-gw: add Gateworks System Controller support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
pgc_otg1 is actual the power domain of usb PHY, usb controller
is in hsio power domain, and pgc_otg1 is required to be powered
up to detect usb remote wakeup, so move the pgc_otg1 power domain
to the usb phy node.
Fixes: ea2b5af58a ("arm64: dts: imx8mn: put USB controller into power-domains")
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
pgc_otg1 is an independent power domain of hsio, it's for usb phy,
so remove hsio power domain from its node.
Fixes: 8b8ebec673 ("arm64: dts: imx8mn: add GPC node")
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
pgc_otg1/2 is actual the power domain of usb PHY, usb controller
is in hsio power domain, and pgc_otg1/2 is required to be powered
up to detect usb remote wakeup, so move the pgc_otg1/2 power domain
to the usb phy node.
Fixes: 01df28d808 ("arm64: dts: imx8mm: put USB controllers into power-domains")
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
pgc_otg1/2 are independent power domain of hsio, they for usb phy,
so remove hsio power domain dependency from its node.
Fixes: d39d4bb153 ("arm64: dts: imx8mm: add GPC node")
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GPIO signaling ctrl_sleep_moci is currently handled as a gpio hog.
But the gpio-hog node is made a child of the wrong gpio controller.
Move it to the node representing gpio4 so that it actually works.
Without this carrier board components jumpered to use the signal are
unconditionally switched off.
Fixes: a39ed23bdf ("arm64: dts: freescale: add initial support for verdin imx8m plus")
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
DSA tagging protocol drivers can be changed at runtime through sysfs and
at probe time through the device tree (support for the latter was added
later).
When changing through sysfs, it is assumed that the module for the new
tagging protocol was already loaded into the kernel (in fact this is
only a concern for Ocelot/Felix switches, where we have tag_ocelot.ko
and tag_ocelot_8021q.ko; for every other switch, the default and
alternative protocols are compiled within the same .ko, so there is
nothing for the user to load).
The kernel cannot currently call request_module(), because it has no way
of constructing the modalias name of the tagging protocol driver
("dsa_tag-%d", where the number is one of DSA_TAG_PROTO_*_VALUE).
The device tree only contains the string name of the tagging protocol
("ocelot-8021q"), and the only mapping between the string and the
DSA_TAG_PROTO_OCELOT_8021Q_VALUE is present in tag_ocelot_8021q.ko.
So this is a chicken-and-egg situation and dsa_core.ko has nothing based
on which it can automatically request the insertion of the module.
As a consequence, if CONFIG_NET_DSA_TAG_OCELOT_8021Q is built as module,
the switch will forever defer probing.
The long-term solution is to make DSA call request_module() somehow,
but that probably needs some refactoring.
What we can do to keep operating with existing device tree blobs is to
cancel the attempt to change the tagging protocol with the one specified
there, and to remain operating with the default one. Depending on the
situation, the default protocol might still allow some functionality
(in the case of ocelot, it does), and it's better to have that than to
fail to probe.
Fixes: deff710703 ("net: dsa: Allow default tag protocol to be overridden from DT")
Link: https://lore.kernel.org/lkml/20221027113248.420216-1-michael@walle.cc/
Reported-by: Heiko Thiery <heiko.thiery@gmail.com>
Reported-by: Michael Walle <michael@walle.cc>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Michael Walle <michael@walle.cc>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221027145439.3086017-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ADIN1110 was registering netdev_notifiers on each device probe.
This leads to warnings/probe failures because of double registration
of the same notifier when to adin1110/2111 devices are connected to
the same system.
Move the registration of netdev_notifiers in module init call,
in this way multiple driver instances can use the same notifiers.
Fixes: bc93e19d08 ("net: ethernet: adi: Add ADIN1110 support")
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Link: https://lore.kernel.org/r/20221027095655.89890-2-alexandru.tachici@analog.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pavel Begunkov says:
====================
a few corrections for SOCK_SUPPORT_ZC
There are several places/cases that got overlooked in regards to
SOCK_SUPPORT_ZC. We're lacking the flag for IPv6 UDP sockets and
accepted TCP sockets. We also should clear the flag when someone
tries to hijack a socket by replacing the ->sk_prot callbacks.
====================
Link: https://lore.kernel.org/r/cover.1666825799.git.asml.silence@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove SOCK_SUPPORT_ZC when we're setting ulp as it might not support
msghdr::ubuf_info, e.g. like TLS replacing ->sk_prot with a new set of
handlers.
Cc: <stable@vger.kernel.org> # 6.0
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: e993ffe3da ("net: flag sockets supporting msghdr originated zerocopy")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sockmap replaces ->sk_prot with its own callbacks, we should remove
SOCK_SUPPORT_ZC as the new proto doesn't support msghdr::ubuf_info.
Cc: <stable@vger.kernel.org> # 6.0
Reported-by: Jakub Kicinski <kuba@kernel.org>
Fixes: e993ffe3da ("net: flag sockets supporting msghdr originated zerocopy")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mark udp ipv6 as supporting msghdr::ubuf_info. In the original commit
SOCK_SUPPORT_ZC was supposed to be set by a udp_init_sock() call from
udp6_init_sock(), but
d38afeec26 ("tcp/udp: Call inet6_destroy_sock() in IPv6 ...")
removed it and so ipv6 udp misses the flag.
Cc: <stable@vger.kernel.org> # 6.0
Fixes: e993ffe3da ("net: flag sockets supporting msghdr originated zerocopy")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mark the validation fields as private, users shouldn't set
them directly and they are too complicated to explain in
a more succinct way (there's already a long explanation
in the comment above).
The strict_start_type field is set directly and has a dedicated
comment so move that above the "private" section.
Link: https://lore.kernel.org/r/20221027212107.2639255-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In two recent run-time memcpy() bound checking bug reports (NFS[1] and
JFS[2]), the _detection_ was working correctly (in the sense that the
requested copy size was larger than the destination field size), but
the _warning text_ was showing the destination field size as SIZE_MAX
("unknown size"). This should be impossible, since the detection function
will explicitly give up if the destination field size is unknown. For
example, the JFS warning was:
memcpy: detected field-spanning write (size 132) of single field "ip->i_link" at fs/jfs/namei.c:950 (size 18446744073709551615)
Other cases of this warning (e.g.[3]) have reported correctly,
and the reproducer only happens under GCC (at least 10.2 and 12.1),
so this currently appears to be a GCC bug. Explicitly capturing the
__builtin_object_size() results in const temporary variables fixes the
report. For example, the JFS reproducer now correctly reports the field
size (128):
memcpy: detected field-spanning write (size 132) of single field "ip->i_link" at fs/jfs/namei.c:950 (size 128)
Examination of the .text delta (which is otherwise identical), shows
the literal value used in the report changing:
- mov $0xffffffffffffffff,%rcx
+ mov $0x80,%ecx
[1] https://lore.kernel.org/lkml/Y0zEzZwhOxTDcBTB@codemonkey.org.uk/
[2] https://syzkaller.appspot.com/bug?id=23d613df5259b977dac1696bec77f61a85890e3d
[3] https://lore.kernel.org/all/202210110948.26b43120-yujie.liu@intel.com/
Cc: "Dr. David Alan Gilbert" <linux@treblig.org>
Cc: llvm@lists.linux.dev
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
The C standard says that memcmp() must treat the buffers as consisting
of "unsigned chars". If char happens to be unsigned, the casts are ok,
but then obviously the c1 variable can never contain a negative
value. And when char is signed, the casts are wrong, and there's still
a problem with using an 8-bit quantity to hold the difference, because
that can range from -255 to +255.
For example, assuming char is signed, comparing two 1-byte buffers,
one containing 0x00 and another 0x80, the current implementation would
return -128 for both memcmp(a, b, 1) and memcmp(b, a, 1), whereas one
of those should of course return something positive.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Fixes: 66b6f755ad ("rcutorture: Import a copy of nolibc")
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When built at -Os, gcc-12 recognizes an strlen() pattern in nolibc_strlen()
and replaces it with a jump to strlen(), which is not defined as a symbol
and breaks compilation. Worse, when the function is called strlen(), the
function is simply replaced with a jump to itself, hence becomes an
infinite loop.
One way to avoid this is to always set -ffreestanding, but the calling
code doesn't know this and there's no way (either via attributes or
pragmas) to globally enable it from include files, effectively leaving
a painful situation for the caller.
Alexey suggested to place an empty asm() statement inside the loop to
stop gcc from recognizing a well-known pattern, which happens to work
pretty fine. At least it allows us to make sure our local definition
is not replaced with a self jump.
The function only needs to be renamed back to strlen() so that the symbol
exists, which implies that nolibc_strlen() which is used on variable
strings has to be declared as a macro that points back to it before the
strlen() macro is redifined.
It was verified to produce valid code with gcc 3.4 to 12.1 at different
optimization levels, and both with constant and variable strings.
In case this problem surfaces again in the future, an alternate approach
consisting in adding an optimize("no-tree-loop-distribute-patterns")
function attribute for gcc>=12 worked as well but is less pretty.
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/r/202210081618.754a77db-yujie.liu@intel.com
Fixes: 66b6f755ad ("rcutorture: Import a copy of nolibc")
Fixes: 96980b833a ("tools/nolibc/string: do not use __builtin_strlen() at -O0")
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The following error messages are observed on boot for Tegra234 ...
ERR KERN tegra-qspi 3270000.spi: cannot use DMA: -19
ERR KERN tegra-qspi 3270000.spi: falling back to PIO
Tegra234 does not support DMA for the QSPI and so initialising the DMA
is expected to fail. The above error messages are misleading for devices
that don't support DMA and so fix this by skipping the DMA
initialisation for devices that don't support DMA.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20221026155633.141792-1-jonathanh@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 8a254d90a7 ("efi: efivars: Fix variable writes without
query_variable_store()") addressed an issue that was introduced during
the EFI variable store refactor, where alternative implementations of
the efivars layer that lacked query_variable_store() would no longer
work.
Unfortunately, there is another case to consider here, which was missed:
if the efivars layer is backed by the EFI runtime services as usual, but
the EFI implementation predates the introduction of QueryVariableInfo(),
we will return EFI_UNSUPPORTED, and this is no longer being dealt with
correctly.
So let's fix this, and while at it, clean up the code a bit, by merging
the check_var_size() routines as well as their callers.
Cc: <stable@vger.kernel.org> # v6.0
Fixes: bbc6d2c6ef ("efi: vars: Switch to new wrapper layer")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Aditya Garg <gargaditya08@live.com>
KASAN reported a null-ptr-deref error:
KASAN: null-ptr-deref in range [0x0000000000000118-0x000000000000011f]
CPU: 1 PID: 379
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:destroy_workqueue+0x2f/0x740
RSP: 0018:ffff888016137df8 EFLAGS: 00000202
...
Call Trace:
ib_core_cleanup+0xa/0xa1 [ib_core]
__do_sys_delete_module.constprop.0+0x34f/0x5b0
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fa1a0d221b7
...
It is because the fail of roce_gid_mgmt_init() is ignored:
ib_core_init()
roce_gid_mgmt_init()
gid_cache_wq = alloc_ordered_workqueue # fail
...
ib_core_cleanup()
roce_gid_mgmt_cleanup()
destroy_workqueue(gid_cache_wq)
# destroy an unallocated wq
Fix this by catching the fail of roce_gid_mgmt_init() in ib_core_init().
Fixes: 03db3a2d81 ("IB/core: Add RoCE GID table management")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221025024146.109137-1-chenzhongjin@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
commit 018d6711c2 ("ACPI: x86: Add a quirk for Dell Inspiron 14 2-in-1
for StorageD3Enable") introduced a quirk to allow a system with ambiguous
use of _ADR 0 to force StorageD3Enable.
Julius Brockmann reports that Inspiron 16 5625 suffers that same symptoms.
Add this other system to the list as well.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216440
Reported-and-tested-by: Julius Brockmann <mail@juliusbrockmann.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit fc64623637 ("phy: qcom-qmp-combo,usb: add support for separate
PCS_USB region") started treating the PCS_USB registers as potentially
separate from the PCS registers but used the wrong base when no PCS_USB
offset has been provided.
Fix the PCS_USB base used at runtime resume to prevent dereferencing a
NULL pointer on platforms that do not provide a PCS_USB offset (e.g.
SC7180).
Fixes: fc64623637 ("phy: qcom-qmp-combo,usb: add support for separate PCS_USB region")
Cc: stable@vger.kernel.org # 5.20
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20221026162116.26462-1-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The bus->clk_stop_timeout member is only initialized to a non-zero value
during the codec driver probe. This can lead to corner cases where this
value remains pegged at zero when the bus suspends, which results in an
endless loop in sdw_bus_wait_for_clk_prep_deprep().
Corner cases include configurations with no codecs described in the
firmware, or delays in probing codec drivers.
Initializing the default timeout to the smallest non-zero value avoid this
problem and allows for the existing logic to be preserved: the
bus->clk_stop_timeout is set as the maximum required by all codecs
connected on the bus.
Fixes: 1f2dcf3a15 ("soundwire: intel: set dev_num_ida_min")
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Chao Song <chao.song@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20221020015624.1703950-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
In cap_inode_getsecurity(), we will use vfs_getxattr_alloc() to
complete the memory allocation of tmpbuf, if we have completed
the memory allocation of tmpbuf, but failed to call handler->get(...),
there will be a memleak in below logic:
|-- ret = (int)vfs_getxattr_alloc(mnt_userns, ...)
| /* ^^^ alloc for tmpbuf */
|-- value = krealloc(*xattr_value, error + 1, flags)
| /* ^^^ alloc memory */
|-- error = handler->get(handler, ...)
| /* error! */
|-- *xattr_value = value
| /* xattr_value is &tmpbuf (memory leak!) */
So we will try to free(tmpbuf) after vfs_getxattr_alloc() fails to fix it.
Cc: stable@vger.kernel.org
Fixes: 8db6c34f1d ("Introduce v3 namespaced file capabilities")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Acked-by: Serge Hallyn <serge@hallyn.com>
[PM: subject line and backtrace tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Instead of generic description, mention what reset_lock actually
protects i.e. lock to serialize xmit and tx_timeout execution.
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On 64 bit host, if the guest doesn't have X86_FEATURE_LM, KVM will
access 16 gprs to 32-bit smram image, causing out-ouf-bound ram
access.
On 32 bit host, the rsm_load_state_64/enter_smm_save_state_64
is compiled out, thus access overflow can't happen.
Fixes: b443183a25 ("KVM: x86: Reduce the number of emulator GPRs to '8' for 32-bit KVM")
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221025124741.228045-15-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update the emulation mode when handling writes to CR0, because
toggling CR0.PE switches between Real and Protected Mode, and toggling
CR0.PG when EFER.LME=1 switches between Long and Protected Mode.
This is likely a benign bug because there is no writeback of state,
other than the RIP increment, and when toggling CR0.PE, the CPU has
to execute code from a very low memory address.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221025124741.228045-14-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update the emulation mode after RSM so that RIP will be correctly
written back, because the RSM instruction can switch the CPU mode from
32 bit (or less) to 64 bit.
This fixes a guest crash in case the #SMI is received while the guest
runs a code from an address > 32 bit.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221025124741.228045-13-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some instructions update the cpu execution mode, which needs to update the
emulation mode.
Extract this code, and make assign_eip_far use it.
assign_eip_far now reads CS, instead of getting it via a parameter,
which is ok, because callers always assign CS to the same value
before calling this function.
No functional change is intended.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221025124741.228045-12-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
SYSEXIT is one of the instructions that can change the
processor mode, thus ctxt->mode should be updated after it.
Note that this is likely a benign bug, because the only problematic
mode change is from 32 bit to 64 bit which can lead to truncation of RIP,
and it is not possible to do with sysexit,
since sysexit running in 32 bit mode will be limited to 32 bit version.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20221025124741.228045-11-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tag "guest_saw_irq" as "volatile" to ensure that the compiler will never
optimize away lookups. Relying on the compiler thinking that the flag
is global and thus might change also works, but it's subtle, less robust,
and looks like a bug at first glance, e.g. risks being "fixed" and
breaking the test.
Make the flag "static" as well since convincing the compiler it's global
is no longer necessary.
Alternatively, the flag could be accessed with {READ,WRITE}_ONCE(), but
literally every access would need the wrappers, and eking out performance
isn't exactly top priority for selftests.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013211234.1318131-17-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tests for races between shinfo_cache (de)activation and hypercall+ioctl()
processing. KVM has had bugs where activating the shared info cache
multiple times and/or with concurrent users results in lock corruption,
NULL pointer dereferences, and other fun.
For the timer injection testcase (#22), re-arm the timer until the IRQ
is successfully injected. If the timer expires while the shared info
is deactivated (invalid), KVM will drop the event.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013211234.1318131-16-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kmemleak reported memory leaks in dsa_loop_init():
kmemleak: 12 new suspected memory leaks
unreferenced object 0xffff8880138ce000 (size 2048):
comm "modprobe", pid 390, jiffies 4295040478 (age 238.976s)
backtrace:
[<000000006a94f1d5>] kmalloc_trace+0x26/0x60
[<00000000a9c44622>] phy_device_create+0x5d/0x970
[<00000000d0ee2afc>] get_phy_device+0xf3/0x2b0
[<00000000dca0c71f>] __fixed_phy_register.part.0+0x92/0x4e0
[<000000008a834798>] fixed_phy_register+0x84/0xb0
[<0000000055223fcb>] dsa_loop_init+0xa9/0x116 [dsa_loop]
...
There are two reasons for memleak in dsa_loop_init().
First, fixed_phy_register() create and register phy_device:
fixed_phy_register()
get_phy_device()
phy_device_create() # freed by phy_device_free()
phy_device_register() # freed by phy_device_remove()
But fixed_phy_unregister() only calls phy_device_remove().
So the memory allocated in phy_device_create() is leaked.
Second, when mdio_driver_register() fail in dsa_loop_init(),
it just returns and there is no cleanup for phydevs.
Fix the problems by catching the error of mdio_driver_register()
in dsa_loop_init(), then calling both fixed_phy_unregister() and
phy_device_free() to release phydevs.
Also add a function for phydevs cleanup to avoid duplacate.
Fixes: 98cd1552ea ("net: dsa: Mock-up driver")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Slaby reported that building the kernel with AR=gcc-ar shows:
/usr/bin/ar terminated with signal 13 [Broken pipe]
Nathan Chancellor reported the latest AR=llvm-ar shows:
error: write on a pipe with no reader
The latter occurs since LLVM commit 51b557adc131 ("Add an error message
to the default SIGPIPE handler").
The resulting vmlinux is correct, but it is better to silence it.
'head -n1' exits after reading the first line, so the pipe is closed.
Use 'sed -n 1p' to eat the stream till the end.
Fixes: 3216484550 ("kbuild: use obj-y instead extra-y for objects placed at the head")
Link: https://github.com/ClangBuiltLinux/linux/issues/1651
Reported-by: Jiri Slaby <jirislaby@kernel.org>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
When expanding a file system using online resize, various fields in
the superblock (e.g., s_blocks_count, s_inodes_count, etc.) change.
To update the backup superblocks, the online resize uses the function
update_backups() in fs/ext4/resize.c. This function was not updating
the checksum field in the backup superblocks. This wasn't a big deal
previously, because e2fsck didn't care about the checksum field in the
backup superblock. (And indeed, update_backups() goes all the way
back to the ext3 days, well before we had support for metadata
checksums.)
However, there is an alternate, more general way of updating
superblock fields, ext4_update_primary_sb() in fs/ext4/ioctl.c. This
function does check the checksum of the backup superblock, and if it
doesn't match will mark the file system as corrupted. That was
clearly not the intent, so avoid to aborting the resize when a bad
superblock is found.
In addition, teach update_backups() to properly update the checksum in
the backup superblocks. We will eventually want to unify
updapte_backups() with the infrasture in ext4_update_primary_sb(), but
that's for another day.
Note: The problem has been around for a while; it just didn't really
matter until ext4_update_primary_sb() was added by commit bbc605cdb1
("ext4: implement support for get/set fs label"). And it became
trivially easy to reproduce after commit 827891a38a ("ext4: update
the s_overhead_clusters in the backup sb's when resizing") in v6.0.
Cc: stable@kernel.org # 5.17+
Fixes: bbc605cdb1 ("ext4: implement support for get/set fs label")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Since commit c35e84b097 ("clk: Introduce clk_hw_init_rate_request()"),
users that used to initialize their clk_rate_request by initializing
their local structure now rely on clk_hw_init_rate_request().
This function is backed by clk_core_init_rate_req(), which will skip the
initialization if either the pointer to struct clk_core or to struct
clk_rate_request are NULL.
However, the core->parent pointer might be NULL because the clock is
orphan, and we will thus end up with our local struct clk_rate_request
left untouched.
And since clk_hw_init_rate_request() doesn't return an error, we will
then call a determine_rate variant with that unitialized structure.
In order to avoid this, let's clear our clk_rate_request if the pointer
to it is valid but the pointer to struct clk_core isn't.
Fixes: c35e84b097 ("clk: Introduce clk_hw_init_rate_request()")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v1-2-f3ef80518140@cerno.tech
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
If a clock has CLK_SET_RATE_PARENT, but core->parent is NULL (most
likely because it's orphan), callers of clk_core_init_rate_req() will
blindly call this function leading to a very verbose warning.
Since it's a fairly common situation, let's just remove the WARN_ON but
keep the check that prevents us from dereferencing the pointer.
Interestingly, it fixes a regression on the Mediatek MT8195 where the
GPU would stall during a clk_set_rate for its main clock. We couldn't
come up with a proper explanation since the condition is essentially the
same.
It was then assumed that it could be timing related since printing the
warning stacktrace takes a while, but we couldn't replicate the failure
by using fairly large (10ms) mdelays.
Fixes: 262ca38f4b ("clk: Stop forwarding clk_rate_requests to the parent")
Reported-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20221018-clk-range-checks-fixes-v1-1-f3ef80518140@cerno.tech
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
When holding a delegation, the NFS client optimizes away setting the
attributes of a file from the GETATTR in the compound after CLONE, and for
a zero-length CLONE we will end up setting the inode's size to zero in
nfs42_copy_dest_done(). Handle this case by computing the resulting count
from the server's reported size after CLONE's GETATTR.
Suggested-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: 94d202d5ca ("NFSv42: Copy offload should update the file size when appropriate")
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If a zero length is passed to kmalloc() it returns 0x10, which is
not a valid address. gss_unwrap_resp_integ() subsequently crashes
when it attempts to dereference that pointer.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
There's a small window where a LOCK sent during a delegation return can
race with another OPEN on client, but the open stateid has not yet been
updated. In this case, the client doesn't handle the OLD_STATEID error
from the server and will lose this lock, emitting:
"NFS: nfs4_handle_delegation_recall_error: unhandled error -10024".
Fix this by sending the task through the nfs4 error handling in
nfs4_lock_done() when we may have to reconcile our stateid with what the
server believes it to be. For this case, the result is a retry of the
LOCK operation with the updated stateid.
Reported-by: Gonzalo Siero Humet <gsierohu@redhat.com>
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
There is a null-ptr-deref when xps sysfs alloc failed:
BUG: KASAN: null-ptr-deref in sysfs_do_create_link_sd+0x40/0xd0
Read of size 8 at addr 0000000000000030 by task gssproxy/457
CPU: 5 PID: 457 Comm: gssproxy Not tainted 6.0.0-09040-g02357b27ee03 #9
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
kasan_report+0xa3/0x120
sysfs_do_create_link_sd+0x40/0xd0
rpc_sysfs_client_setup+0x161/0x1b0
rpc_new_client+0x3fc/0x6e0
rpc_create_xprt+0x71/0x220
rpc_create+0x1d4/0x350
gssp_rpc_create+0xc3/0x160
set_gssp_clnt+0xbc/0x140
write_gssp+0x116/0x1a0
proc_reg_write+0xd6/0x130
vfs_write+0x177/0x690
ksys_write+0xb9/0x150
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
When the xprt_switch sysfs alloc failed, should not add xprt and
switch sysfs to it, otherwise, maybe null-ptr-deref; also initialize
the 'xps_sysfs' to NULL to avoid oops when destroy it.
Fixes: 2a338a5431 ("sunrpc: add a symlink from rpc-client directory to the xprt_switch")
Fixes: d408ebe04a ("sunrpc: add add sysfs directory per xprt under each xprt_switch")
Fixes: baea99445d ("sunrpc: add xprt_switch direcotry to sunrpc's sysfs")
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Currently, we are only guaranteed to send RECLAIM_COMPLETE if we have
open state to recover. Fix the client to always send RECLAIM_COMPLETE
after setting up the lease.
Fixes: fce5c838e1 ("nfs41: RECLAIM_COMPLETE functionality")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If RECLAIM_COMPLETE sets the NFS4CLNT_BIND_CONN_TO_SESSION flag, then we
need to loop back in order to handle it.
Fixes: 0048fdd066 ("NFSv4.1: RECLAIM_COMPLETE must handle NFS4ERR_CONN_NOT_BOUND_TO_SESSION")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the server reboots while we are engaged in a delegation return, and
there is a pNFS layout with return-on-close set, then the current code
can end up deadlocking in pnfs_roc() when nfs_inode_set_delegation()
tries to return the old delegation.
Now that delegreturn actually uses its own copy of the stateid, it
should be safe to just always update the delegation stateid in place.
Fixes: 078000d02d ("pNFS: We want return-on-close to complete when evicting the inode")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The 'nfs_server' and 'mount_server' structures include a union of
'struct sockaddr' (with the older 16 bytes max address size) and
'struct sockaddr_storage' which is large enough to hold all the
supported sa_family types (128 bytes max size). The runtime memcpy()
buffer overflow checker is seeing attempts to write beyond the 16
bytes as an overflow, but the actual expected size is that of 'struct
sockaddr_storage'. Plumb the use of 'struct sockaddr_storage' more
completely through-out NFS, which results in adjusting the memcpy()
buffers to the correct union members. Avoids this false positive run-time
warning under CONFIG_FORTIFY_SOURCE:
memcpy: detected field-spanning write (size 28) of single field "&ctx->nfs_server.address" at fs/nfs/namespace.c:178 (size 16)
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/all/202210110948.26b43120-yujie.liu@intel.com
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: linux-nfs@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Fix the following coccicheck warning:
fs/nfs/dir.c:2494:2-7: WARNING:
NULL check before some freeing functions is not needed.
Signed-off-by: Yushan Zhou <katrinzhou@tencent.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
enter_exception64() performs an MTE check, which involves dereferencing
vcpu->kvm. While vcpu has already been fixed up to be a HYP VA pointer,
kvm is still a pointer in the kernel VA space.
This only affects nVHE configurations with MTE enabled, as in other
cases, the pointer is either valid (VHE) or not dereferenced (!MTE).
Fix this by first converting kvm to a HYP VA pointer.
Fixes: ea7fc1bb1c ("KVM: arm64: Introduce MTE VM feature")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
[maz: commit message tidy-up]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20221027120945.29679-1-ryan.roberts@arm.com
Commit f73edc8951 ("kbuild: unify two modpost invocations") introduced
a typo (moudle.symvers-if-present) which results in the kernel's
Module.symvers to not be included as a prerequisite for
$(KBUILD_EXTMOD)/Module.symvers. Fix the typo to restore the intended
functionality.
Fixes: f73edc8951 ("kbuild: unify two modpost invocations")
Signed-off-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The status of git will affect the final compilation result, add it to
the documentation of reproducible builds.
Signed-off-by: Dan Li <ashimida@linux.alibaba.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reject kvm_gpc_check() and kvm_gpc_refresh() if the cache is inactive.
Not checking the active flag during refresh is particularly egregious, as
KVM can end up with a valid, inactive cache, which can lead to a variety
of use-after-free bugs, e.g. consuming a NULL kernel pointer or missing
an mmu_notifier invalidation due to the cache not being on the list of
gfns to invalidate.
Note, "active" needs to be set if and only if the cache is on the list
of caches, i.e. is reachable via mmu_notifier events. If a relevant
mmu_notifier event occurs while the cache is "active" but not on the
list, KVM will not acquire the cache's lock and so will not serailize
the mmu_notifier event with active users and/or kvm_gpc_refresh().
A race between KVM_XEN_ATTR_TYPE_SHARED_INFO and KVM_XEN_HVM_EVTCHN_SEND
can be exploited to trigger the bug.
1. Deactivate shinfo cache:
kvm_xen_hvm_set_attr
case KVM_XEN_ATTR_TYPE_SHARED_INFO
kvm_gpc_deactivate
kvm_gpc_unmap
gpc->valid = false
gpc->khva = NULL
gpc->active = false
Result: active = false, valid = false
2. Cause cache refresh:
kvm_arch_vm_ioctl
case KVM_XEN_HVM_EVTCHN_SEND
kvm_xen_hvm_evtchn_send
kvm_xen_set_evtchn
kvm_xen_set_evtchn_fast
kvm_gpc_check
return -EWOULDBLOCK because !gpc->valid
kvm_xen_set_evtchn_fast
return -EWOULDBLOCK
kvm_gpc_refresh
hva_to_pfn_retry
gpc->valid = true
gpc->khva = not NULL
Result: active = false, valid = true
3. Race ioctl KVM_XEN_HVM_EVTCHN_SEND against ioctl
KVM_XEN_ATTR_TYPE_SHARED_INFO:
kvm_arch_vm_ioctl
case KVM_XEN_HVM_EVTCHN_SEND
kvm_xen_hvm_evtchn_send
kvm_xen_set_evtchn
kvm_xen_set_evtchn_fast
read_lock gpc->lock
kvm_xen_hvm_set_attr case
KVM_XEN_ATTR_TYPE_SHARED_INFO
mutex_lock kvm->lock
kvm_xen_shared_info_init
kvm_gpc_activate
gpc->khva = NULL
kvm_gpc_check
[ Check passes because gpc->valid is
still true, even though gpc->khva
is already NULL. ]
shinfo = gpc->khva
pending_bits = shinfo->evtchn_pending
CRASH: test_and_set_bit(..., pending_bits)
Fixes: 982ed0de47 ("KVM: Reinstate gfn_to_pfn_cache with invalidation support")
Cc: stable@vger.kernel.org
Reported-by: : Michal Luczaj <mhal@rbox.co>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013211234.1318131-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move the gfn_to_pfn_cache lock initialization to another helper and
call the new helper during VM/vCPU creation. There are race
conditions possible due to kvm_gfn_to_pfn_cache_init()'s
ability to re-initialize the cache's locks.
For example: a race between ioctl(KVM_XEN_HVM_EVTCHN_SEND) and
kvm_gfn_to_pfn_cache_init() leads to a corrupted shinfo gpc lock.
(thread 1) | (thread 2)
|
kvm_xen_set_evtchn_fast |
read_lock_irqsave(&gpc->lock, ...) |
| kvm_gfn_to_pfn_cache_init
| rwlock_init(&gpc->lock)
read_unlock_irqrestore(&gpc->lock, ...) |
Rename "cache_init" and "cache_destroy" to activate+deactivate to
avoid implying that the cache really is destroyed/freed.
Note, there more races in the newly named kvm_gpc_activate() that will
be addressed separately.
Fixes: 982ed0de47 ("KVM: Reinstate gfn_to_pfn_cache with invalidation support")
Cc: stable@vger.kernel.org
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
[sean: call out that this is a bug fix]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20221013211234.1318131-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clear enable_sgx if ENCLS-exiting is not supported, i.e. if SGX cannot be
virtualized. When KVM is loaded, adjust_vmx_controls checks that the
bit is available before enabling the feature; however, other parts of the
code check enable_sgx and not clearing the variable caused two different
bugs, mostly affecting nested virtualization scenarios.
First, because enable_sgx remained true, SECONDARY_EXEC_ENCLS_EXITING
would be marked available in the capability MSR that are accessed by a
nested hypervisor. KVM would then propagate the control from vmcs12
to vmcs02 even if it isn't supported by the processor, thus causing an
unexpected VM-Fail (exit code 0x7) in L1.
Second, vmx_set_cpu_caps() would not clear the SGX bits when hardware
support is unavailable. This is a much less problematic bug as it only
happens if SGX is soft-disabled (available in the processor but hidden
in CPUID) or if SGX is supported for bare metal but not in the VMCS
(will never happen when running on bare metal, but can theoertically
happen when running in a VM).
Last but not least, this ensures that module params in sysfs reflect
KVM's actual configuration.
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=2127128
Fixes: 72add915fb ("KVM: VMX: Enable SGX virtualization for SGX1, SGX2 and LC")
Cc: stable@vger.kernel.org
Suggested-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Bandan Das <bsd@redhat.com>
Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com>
Message-Id: <20221025123749.2201649-1-eesposit@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Exempt pending triple faults, a.k.a. KVM_REQ_TRIPLE_FAULT, when asserting
that KVM didn't attempt to queue a new exception during event injection.
KVM needs to emulate the injection itself when emulating Real Mode due to
lack of unrestricted guest support (VMX) and will queue a triple fault if
that emulation fails.
Ideally the assertion would more precisely filter out the emulated Real
Mode triple fault case, but rmode.vm86_active is buried in vcpu_vmx and
can't be queried without a new kvm_x86_ops. And unlike "regular"
exceptions, triple fault cannot put the vCPU into an infinite loop; the
triple fault will force either an exit to userspace or a nested VM-Exit,
and triple fault after nested VM-Exit will force an exit to userspace.
I.e. there is no functional issue, so just suppress the warning for
triple faults.
Opportunistically convert the warning to a one-time thing, when it
fires, it fires _a lot_, and is usually user triggerable, i.e. can be
used to spam the kernel log.
Fixes: 7055fb1131 ("KVM: x86: Treat pending TRIPLE_FAULT requests as pending exceptions")
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/r/202209301338.aca913c3-yujie.liu@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220930230008.1636044-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The parisc serial port driver needs this symbol when it's compiled
as module.
Signed-off-by: Helge Deller <deller@gmx.de>
Reported-by: kernel test robot <lkp@intel.com>
Cc: <stable@vger.kernel.org>
Pull Renesas clk driver fixes from Geert Uytterhoeven:
- Correct the parent clocks for the High Speed Serial Communication
Interfaces with FIFO (HSCIF) modules on the R-Car V4H SoC.
Note that HSCIF0 is used for the serial console on the White-Hawk
development board.
* tag 'renesas-clk-fixes-for-v6.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
clk: renesas: r8a779g0: Fix HSCIF parent clocks
clk: renesas: r8a779g0: Add SASYNCPER clocks
xfs_rename can update up to 5 inodes: src_dp, target_dp, src_ip, target_ip
and wip. So we need to increase the inode reservation to match.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
As serial communication requires a clean clock signal, the High Speed
Serial Communication Interfaces with FIFO (HSCIF) is clocked by a clock
that is not affected by Spread Spectrum or Fractional Multiplication.
Hence change the parent clocks for the HSCIF modules from the S0D3_PER
clock to the SASYNCPERD1 clock (which has the same clock rate), cfr.
R-Car V4H Hardware User's Manual rev. 0.54.
Fixes: 0ab55cf183 ("clk: renesas: cpg-mssr: Add support for R-Car V4H")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/b7928abc8b9f53d5b06ec8624342f449de3d24ec.1665147497.git.geert+renesas@glider.be
hyp_get_page_state() is used with pKVM to retrieve metadata about a page
by parsing a hypervisor stage-1 PTE. However, it incorrectly uses a
helper which parses *stage-2* mappings. Ouch.
Luckily, pkvm_getstate() only looks at the software bits, which happen
to be in the same place for stage-1 and stage-2 PTEs, and this all ends
up working correctly by accident. But clearly, we should do better.
Fix hyp_get_page_state() to use the correct helper.
Fixes: e82edcc75c ("KVM: arm64: Implement do_share() helper for sharing memory")
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221025145156.855308-1-qperret@google.com
[BUG]
There are two reports (the earliest one from LKP, a more recent one from
kernel bugzilla) that we can have some chunks with 0 as sub_stripes.
This will cause divide-by-zero errors at btrfs_rmap_block, which is
introduced by a recent kernel patch ac0677348f ("btrfs: merge
calculations for simple striped profiles in btrfs_rmap_block"):
if (map->type & (BTRFS_BLOCK_GROUP_RAID0 |
BTRFS_BLOCK_GROUP_RAID10)) {
stripe_nr = stripe_nr * map->num_stripes + i;
stripe_nr = div_u64(stripe_nr, map->sub_stripes); <<<
}
[CAUSE]
From the more recent report, it has been proven that we have some chunks
with 0 as sub_stripes, mostly caused by older mkfs.
It turns out that the mkfs.btrfs fix is only introduced in 6718ab4d33aa
("btrfs-progs: Initialize sub_stripes to 1 in btrfs_alloc_data_chunk")
which is included in v5.4 btrfs-progs release.
So there would be quite some old filesystems with such 0 sub_stripes.
[FIX]
Just don't trust the sub_stripes values from disk.
We have a trusted btrfs_raid_array[] to fetch the correct sub_stripes
numbers for each profile and that are fixed.
By this, we can keep the compatibility with older filesystems while
still avoid divide-by-zero bugs.
Reported-by: kernel test robot <oliver.sang@intel.com>
Reported-by: Viktor Kuzmin <kvaster@gmail.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216559
Fixes: ac0677348f ("btrfs: merge calculations for simple striped profiles in btrfs_rmap_block")
CC: stable@vger.kernel.org # 6.0
Reviewed-by: Su Yue <glass@fydeos.io>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 9e4e2ce1a7 ("parisc/serial: Rename 8250_gsc.c to 8250_parisc.c")
renames the parisc serial driver file, but does not adjust the entry in
MAINTAINERS.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Repair this file reference in PARISC ARCHITECTURE.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Fixes: 9e4e2ce1a7 ("parisc/serial: Rename 8250_gsc.c to 8250_parisc.c")
Signed-off-by: Helge Deller <deller@gmx.de>
With just the forward declaration of the 'struct pt_regs' in
syscall_wrapper.h, the syscall stub functions:
__[x64|ia32]_sys_*(struct pt_regs *regs)
will have different definition of 'regs' argument in BTF data
based on which object file they are defined in.
If the syscall's object includes 'struct pt_regs' definition,
the BTF argument data will point to a 'struct pt_regs' record,
like:
[226] STRUCT 'pt_regs' size=168 vlen=21
'r15' type_id=1 bits_offset=0
'r14' type_id=1 bits_offset=64
'r13' type_id=1 bits_offset=128
...
If not, it will point to a fwd declaration record:
[15439] FWD 'pt_regs' fwd_kind=struct
and make bpf tracing program hooking on those functions unable
to access fields from 'struct pt_regs'.
Include asm/ptrace.h directly in syscall_wrapper.h to make sure all
syscalls see 'struct pt_regs' definition. This then results in BTF for
'__*_sys_*(struct pt_regs *regs)' functions to point to the actual
struct, not just the forward declaration.
[ bp: No Fixes tag as this is not really a bug fix but "adjustment" so
that BTF is happy. ]
Reported-by: Akihiro HARAI <jharai0815@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: <stable@vger.kernel.org> # this is needed only for BTF so kernels >= 5.15
Link: https://lore.kernel.org/r/20221018122708.823792-1-jolsa@kernel.org
The type of parameter generation has been u32 since the beginning,
however all callers pass a u64 generation, so unify the types to prevent
potential loss.
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit 9ed0a72e5b ("btrfs: send: fix failures when processing inodes with
no links") tries to fix all incremental send cases of orphan inodes the
send operation will meet. However, there's still a bug causing the corner
subcase fails with a ENOENT error.
Here's shortened steps of that subcase:
$ btrfs subvolume create vol
$ touch vol/foo
$ btrfs subvolume snapshot -r vol snap1
$ btrfs subvolume snapshot -r vol snap2
# Turn the second snapshot to RW mode and delete the file while
# holding an open file descriptor on it
$ btrfs property set snap2 ro false
$ exec 73<snap2/foo
$ rm snap2/foo
# Set the second snapshot back to RO mode and do an incremental send
# with an unusal reverse order
$ btrfs property set snap2 ro true
$ btrfs send -p snap2 snap1 > /dev/null
At subvol snap1
ERROR: send ioctl failed with -2: No such file or directory
It's subcase 3 of BTRFS_COMPARE_TREE_CHANGED in the commit 9ed0a72e5b
("btrfs: send: fix failures when processing inodes with no links"). And
it's not a common case. We still have not met it in the real world.
Theoretically, this case can happen in a batch cascading snapshot backup.
In cascading backups, the receive operation in the middle may cause orphan
inodes to appear because of the open file descriptors on the snapshot files
during receiving. And if we don't do the batch snapshot backups in their
creation order, then we can have an inode, which is an orphan in the parent
snapshot but refers to a file in the send snapshot. Since an orphan inode
has no paths, the send operation will fail with a ENOENT error if it
tries to generate a path for it.
In that patch, this subcase will be treated as an inode with a new
generation. However, when the routine tries to delete the old paths in
the parent snapshot, the function process_all_refs() doesn't check whether
there are paths recorded or not before it calls the function
process_recorded_refs(). And the function process_recorded_refs() try
to get the first path in the parent snapshot in the beginning. Since it has
no paths in the parent snapshot, the send operation fails.
To fix this, we can easily put a link count check to avoid entering the
deletion routine like what we do a link count check to avoid creating a
new one. Moreover, we can assume that the function process_all_refs()
can always collect references to process because we know it has a
positive link count.
Fixes: 9ed0a72e5b ("btrfs: send: fix failures when processing inodes with no links")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: BingJing Chang <bingjingc@synology.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Previous commit a05d3c9153 ("btrfs: check superblock to ensure the fs
was not modified at thaw time") only checks the content of the super
block, but it doesn't really check if the on-disk super block has a
matching checksum.
This patch will add the checksum verification to thaw time superblock
verification.
This involves the following extra changes:
- Export btrfs_check_super_csum()
As we need to call it in super.c.
- Change the argument list of btrfs_check_super_csum()
Instead of passing a char *, directly pass struct btrfs_super_block *
pointer.
- Verify that our checksum type didn't change before checking the
checksum value, like it's done at mount time
Fixes: a05d3c9153 ("btrfs: check superblock to ensure the fs was not modified at thaw time")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have been seeing the following panic in production
kernel BUG at fs/btrfs/tree-mod-log.c:677!
invalid opcode: 0000 [#1] SMP
RIP: 0010:tree_mod_log_rewind+0x1b4/0x200
RSP: 0000:ffffc9002c02f890 EFLAGS: 00010293
RAX: 0000000000000003 RBX: ffff8882b448c700 RCX: 0000000000000000
RDX: 0000000000008000 RSI: 00000000000000a7 RDI: ffff88877d831c00
RBP: 0000000000000002 R08: 000000000000009f R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000100c40 R12: 0000000000000001
R13: ffff8886c26d6a00 R14: ffff88829f5424f8 R15: ffff88877d831a00
FS: 00007fee1d80c780(0000) GS:ffff8890400c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fee1963a020 CR3: 0000000434f33002 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
btrfs_get_old_root+0x12b/0x420
btrfs_search_old_slot+0x64/0x2f0
? tree_mod_log_oldest_root+0x3d/0xf0
resolve_indirect_ref+0xfd/0x660
? ulist_alloc+0x31/0x60
? kmem_cache_alloc_trace+0x114/0x2c0
find_parent_nodes+0x97a/0x17e0
? ulist_alloc+0x30/0x60
btrfs_find_all_roots_safe+0x97/0x150
iterate_extent_inodes+0x154/0x370
? btrfs_search_path_in_tree+0x240/0x240
iterate_inodes_from_logical+0x98/0xd0
? btrfs_search_path_in_tree+0x240/0x240
btrfs_ioctl_logical_to_ino+0xd9/0x180
btrfs_ioctl+0xe2/0x2ec0
? __mod_memcg_lruvec_state+0x3d/0x280
? do_sys_openat2+0x6d/0x140
? kretprobe_dispatcher+0x47/0x70
? kretprobe_rethook_handler+0x38/0x50
? rethook_trampoline_handler+0x82/0x140
? arch_rethook_trampoline_callback+0x3b/0x50
? kmem_cache_free+0xfb/0x270
? do_sys_openat2+0xd5/0x140
__x64_sys_ioctl+0x71/0xb0
do_syscall_64+0x2d/0x40
Which is this code in tree_mod_log_rewind()
switch (tm->op) {
case BTRFS_MOD_LOG_KEY_REMOVE_WHILE_FREEING:
BUG_ON(tm->slot < n);
This occurs because we replay the nodes in order that they happened, and
when we do a REPLACE we will log a REMOVE_WHILE_FREEING for every slot,
starting at 0. 'n' here is the number of items in this block, which in
this case was 1, but we had 2 REMOVE_WHILE_FREEING operations.
The actual root cause of this was that we were replaying operations for
a block that shouldn't have been replayed. Consider the following
sequence of events
1. We have an already modified root, and we do a btrfs_get_tree_mod_seq().
2. We begin removing items from this root, triggering KEY_REPLACE for
it's child slots.
3. We remove one of the 2 children this root node points to, thus triggering
the root node promotion of the remaining child, and freeing this node.
4. We modify a new root, and re-allocate the above node to the root node of
this other root.
The tree mod log looks something like this
logical 0 op KEY_REPLACE (slot 1) seq 2
logical 0 op KEY_REMOVE (slot 1) seq 3
logical 0 op KEY_REMOVE_WHILE_FREEING (slot 0) seq 4
logical 4096 op LOG_ROOT_REPLACE (old logical 0) seq 5
logical 8192 op KEY_REMOVE_WHILE_FREEING (slot 1) seq 6
logical 8192 op KEY_REMOVE_WHILE_FREEING (slot 0) seq 7
logical 0 op LOG_ROOT_REPLACE (old logical 8192) seq 8
>From here the bug is triggered by the following steps
1. Call btrfs_get_old_root() on the new_root.
2. We call tree_mod_log_oldest_root(btrfs_root_node(new_root)), which is
currently logical 0.
3. tree_mod_log_oldest_root() calls tree_mod_log_search_oldest(), which
gives us the KEY_REPLACE seq 2, and since that's not a
LOG_ROOT_REPLACE we incorrectly believe that we don't have an old
root, because we expect that the most recent change should be a
LOG_ROOT_REPLACE.
4. Back in tree_mod_log_oldest_root() we don't have a LOG_ROOT_REPLACE,
so we don't set old_root, we simply use our existing extent buffer.
5. Since we're using our existing extent buffer (logical 0) we call
tree_mod_log_search(0) in order to get the newest change to start the
rewind from, which ends up being the LOG_ROOT_REPLACE at seq 8.
6. Again since we didn't find an old_root we simply clone logical 0 at
it's current state.
7. We call tree_mod_log_rewind() with the cloned extent buffer.
8. Set n = btrfs_header_nritems(logical 0), which would be whatever the
original nritems was when we COWed the original root, say for this
example it's 2.
9. We start from the newest operation and work our way forward, so we
see LOG_ROOT_REPLACE which we ignore.
10. Next we see KEY_REMOVE_WHILE_FREEING for slot 0, which triggers the
BUG_ON(tm->slot < n), because it expects if we've done this we have a
completely empty extent buffer to replay completely.
The correct thing would be to find the first LOG_ROOT_REPLACE, and then
get the old_root set to logical 8192. In fact making that change fixes
this particular problem.
However consider the much more complicated case. We have a child node
in this tree and the above situation. In the above case we freed one
of the child blocks at the seq 3 operation. If this block was also
re-allocated and got new tree mod log operations we would have a
different problem. btrfs_search_old_slot(orig root) would get down to
the logical 0 root that still pointed at that node. However in
btrfs_search_old_slot() we call tree_mod_log_rewind(buf) directly. This
is not context aware enough to know which operations we should be
replaying. If the block was re-allocated multiple times we may only
want to replay a range of operations, and determining what that range is
isn't possible to determine.
We could maybe solve this by keeping track of which root the node
belonged to at every tree mod log operation, and then passing this
around to make sure we're only replaying operations that relate to the
root we're trying to rewind.
However there's a simpler way to solve this problem, simply disallow
reallocations if we have currently running tree mod log users. We
already do this for leaf's, so we're simply expanding this to nodes as
well. This is a relatively uncommon occurrence, and the problem is
complicated enough I'm worried that we will still have corner cases in
the reallocation case. So fix this in the most straightforward way
possible.
Fixes: bd989ba359 ("Btrfs: add tree modification log functions")
CC: stable@vger.kernel.org # 3.3+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After changes in commit 917f32a235 ("btrfs: give struct btrfs_bio a
real end_io handler") the layout of btrfs_bio can be improved. There
are two holes and the structure size is 264 bytes on release build. By
reordering the iterator we can get rid of the holes and the size is 256
bytes which fits to slabs much better.
Final layout:
struct btrfs_bio {
unsigned int mirror_num; /* 0 4 */
struct bvec_iter iter; /* 4 20 */
u64 file_offset; /* 24 8 */
struct btrfs_device * device; /* 32 8 */
u8 * csum; /* 40 8 */
u8 csum_inline[64]; /* 48 64 */
/* --- cacheline 1 boundary (64 bytes) was 48 bytes ago --- */
btrfs_bio_end_io_t end_io; /* 112 8 */
void * private; /* 120 8 */
/* --- cacheline 2 boundary (128 bytes) --- */
struct work_struct end_io_work; /* 128 32 */
struct bio bio; /* 160 96 */
/* size: 256, cachelines: 4, members: 10 */
};
Fixes: 917f32a235 ("btrfs: give struct btrfs_bio a real end_io handler")
Signed-off-by: David Sterba <dsterba@suse.com>
Currently if full_stripe_write() failed to allocate the pages for
parity, it will call __free_raid_bio() first, then return -ENOMEM.
But some caller of full_stripe_write() will also call __free_raid_bio()
again, this would cause double freeing.
And it's not a logically sound either, normally we should either free
the memory at the same level where we allocated it, or let endio to
handle everything.
So this patch will solve the double freeing by make
raid56_parity_write() to handle the error and free the rbio.
Just like what we do in raid56_parity_recover().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In raid56_alloc_missing_rbio(), if we can not determine where the
missing device is inside the full stripe, we just BUG_ON().
This is not necessary especially the only caller inside scrub.c is
already properly checking the return value, and will treat it as a
memory allocation failure.
Fix the error handling by:
- Add an extra warning for the reason
Although personally speaking it may be better to be an ASSERT().
- Properly free the allocated rbio
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Lock grab occurs in a concurrent scenario, resulting in stepping on a NULL
pointer. It should be init mutex_init() first before use the lock.
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
Call trace:
__mutex_lock.constprop.0+0xd0/0x5c0
__mutex_lock_slowpath+0x1c/0x2c
mutex_lock+0x44/0x50
free_mr_send_cmd_to_hw+0x7c/0x1c0 [hns_roce_hw_v2]
hns_roce_v2_dereg_mr+0x30/0x40 [hns_roce_hw_v2]
hns_roce_dereg_mr+0x4c/0x130 [hns_roce_hw_v2]
ib_dereg_mr_user+0x54/0x124
uverbs_free_mr+0x24/0x30
destroy_hw_idr_uobject+0x38/0x74
uverbs_destroy_uobject+0x48/0x1c4
uobj_destroy+0x74/0xcc
ib_uverbs_cmd_verbs+0x368/0xbb0
ib_uverbs_ioctl+0xec/0x1a4
__arm64_sys_ioctl+0xb4/0x100
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0x58/0x190
do_el0_svc+0x30/0x90
el0_svc+0x2c/0xb4
el0t_64_sync_handler+0x1a4/0x1b0
el0t_64_sync+0x19c/0x1a0
Fixes: 70f9252158 ("RDMA/hns: Use the reserved loopback QPs to free MR before destroying MPT")
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Link: https://lore.kernel.org/r/20221024083814.1089722-3-xuhaoyue1@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
When function reset and local invalidate are mixed, HNS RoCEE may hang.
Before introducing the cause of the problem, two hardware internal
concepts need to be introduced:
1. Execution queue: The queue of hardware execution instructions,
function reset and local invalidate are queued for execution in this
queue.
2.Local queue: A queue that stores local operation instructions. The
instructions in the local queue will be sent to the execution queue
for execution. The instructions in the local queue will not be removed
until the execution is completed.
The reason for the problem is as follows:
1. There is a function reset instruction in the execution queue, which
is currently being executed. A necessary condition for the successful
execution of function reset is: the hardware pipeline needs to empty
the instructions that were not completed before;
2. A local invalidate instruction at the head of the local queue is
sent to the execution queue. Now there are two instructions in the
execution queue, the first is the function reset instruction, and the
second is the local invalidate instruction, which will be executed in
se quence;
3. The user has issued many local invalidate operations, causing the
local queue to be filled up.
4. The user still has a new local operation command and is queuing to
enter the local queue. But the local queue is full and cannot receive
new instructions, this instruction is temporarily stored at the
hardware pipeline.
5. The function reset has been waiting for the instruction before the
hardware pipeline stage is drained. The hardware pipeline stage also
caches a local invalidate instruction, so the function reset cannot be
completed, and the instructions after it cannot be executed.
These factors together cause the execution logic deadlock of the hardware,
and the consequence is that RoCEE will not have any response. Considering
that the local operation command may potentially cause RoCEE to hang, this
feature is no longer supported.
Fixes: e93df01085 ("RDMA/hns: Support local invalidate for hip08 in kernel space")
Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Link: https://lore.kernel.org/r/20221024083814.1089722-2-xuhaoyue1@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The original fix "spi: stm32: Rate-limit the 'Communication suspended' message"
still leads to "stm32h7_spi_irq_thread: 1696 callbacks suppressed" spew in the
kernel log. Since this 'Communication suspended' message is a debug print, add
RATELIMIT_MSG_ON_RELEASE flag to inhibit the "callbacks suspended" part during
normal operation and only print summary at the end.
Fixes: ea8be08cc9 ("spi: stm32: Rate-limit the 'Communication suspended' message")
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20221018183513.206706-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
EFI runtime services data is guaranteed to be preserved by the OS,
making it a suitable candidate for the EFI random seed table, which may
be passed to kexec kernels as well (after refreshing the seed), and so
we need to ensure that the memory is preserved without support from the
OS itself.
However, runtime services data is intended for allocations that are
relevant to the implementations of the runtime services themselves, and
so they are unmapped from the kernel linear map, and mapped into the EFI
page tables that are active while runtime service invocations are in
progress. None of this is needed for the RNG seed.
So let's switch to EFI 'ACPI reclaim' memory: in spite of the name,
there is nothing exclusively ACPI about it, it is simply a type of
allocation that carries firmware provided data which may or may not be
relevant to the OS, and it is left up to the OS to decide whether to
reclaim it after having consumed its contents.
Given that in Linux, we never reclaim these allocations, it is a good
choice for the EFI RNG seed, as the allocation is guaranteed to survive
kexec reboots.
One additional reason for changing this now is to align it with the
upcoming recommendation for EFI bootloader provided RNG seeds, which
must not use EFI runtime services code/data allocations.
Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
We no longer need at least 64 bytes of random seed to permit the early
crng init to complete. The RNG is now based on Blake2s, so reduce the
EFI seed size to the Blake2s hash size, which is sufficient for our
purposes.
While at it, drop the READ_ONCE(), which was supposed to prevent size
from being evaluated after seed was unmapped. However, this cannot
actually happen, so READ_ONCE() is unnecessary here.
Cc: <stable@vger.kernel.org> # v4.14+
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Jason A. Donenfeld <Jason@zx2c4.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
memblock_reserve() expects a physical address, but the address being
passed for the TPM final events log is what was returned from
early_memremap(). This results in something like the following:
[ 0.000000] memblock_reserve: [0xffffffffff2c0000-0xffffffffff2c00e4] efi_tpm_eventlog_init+0x324/0x370
Pass the address from efi like what is done for the TPM events log.
Fixes: c46f340569 ("tpm: Reserve the TPM final events table")
Cc: Matthew Garrett <mjg59@google.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Bartosz Szczepanek <bsz@semihalf.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Enable CPLD_Dn pull down resistor instead of pull up to avoid
intefering with CPLD power off functionality.
Fixes: 510c527b4f ("arm64: dts: imx8mm: Add i.MX8M Mini Toradex Verdin based Menlo board")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
KVM_GET_SUPPORTED_CPUID should only enumerate features that KVM
actually supports. The following ranges of CPUID.80000008H are reserved
and should be masked off:
ECX[31:18]
ECX[11:8]
In addition, the PerfTscSize field at ECX[17:16] should also be zero
because KVM does not set the PERFTSC bit at CPUID.80000001H.ECX[27].
Fixes: 24c82e576b ("KVM: Sanitize cpuid")
Signed-off-by: Jim Mattson <jmattson@google.com>
Message-Id: <20220929225203.2234702-3-jmattson@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_GET_SUPPORTED_CPUID should only enumerate features that KVM
actually supports. CPUID.80000001:EBX[27:16] are reserved bits and
should be masked off.
Fixes: 0771671749 ("KVM: Enhance guest cpuid management")
Signed-off-by: Jim Mattson <jmattson@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fixes a warning that occurs when rc table support is enabled
(IEEE80211_HW_SUPPORTS_RC_TABLE) in mac80211_hwsim and the PS mode
is changed via the exported debugfs attribute.
When the PS mode is changed, a packet is broadcasted via
hwsim_send_nullfunc by creating and transmitting a plain skb with only
header initialized. The ieee80211 rate array in the control buffer is
zero-initialized. When ratetbl support is enabled, ieee80211_get_tx_rates
is called for the skb with sta parameter set to NULL and thus no
ratetbl can be used. The final rate array then looks like
[-1,0; 0,0; 0,0; 0,0] which causes the warning in ieee80211_get_tx_rate.
The issue is fixed by setting the count of the first rate with idx '0'
to 1 and hence ieee80211_get_tx_rates won't overwrite it with idx '-1'.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When invoking function cfg80211_calculate_bitrate_eht about
(320 MHz, EHT-MCS 13, EHT-NSS 2, EHT-GI 0), which means the
parameters as flags: 0x80, bw: 7, mcs: 13, eht_gi: 0, nss: 2,
this formula (result * rate->nss) will overflow and causes
the returned bitrate to be 3959 when it should be 57646.
Here is the explanation:
u64 tmp;
u32 result;
…
/* tmp = result = 4 * rates_996[0]
* = 4 * 480388888 = 0x72889c60
*/
tmp = result;
/* tmp = 0x72889c60 * 6144 = 0xabccea90000 */
tmp *= SCALE;
/* tmp = 0xabccea90000 / mcs_divisors[13]
* = 0xabccea90000 / 5120 = 0x8970bba6
*/
do_div(tmp, mcs_divisors[rate->mcs]);
/* result = 0x8970bba6 */
result = tmp;
/* normally (result * rate->nss) = 0x8970bba6 * 2 = 0x112e1774c,
* but since result is u32, (result * rate->nss) = 0x12e1774c,
* overflow happens and it loses the highest bit.
* Then result = 0x12e1774c / 8 = 39595753,
*/
result = (result * rate->nss) / 8;
Signed-off-by: Paul Zhang <quic_paulz@quicinc.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the function query_regdb_file() the alpha2 parameter is duplicated
using kmemdup() and subsequently freed in regdb_fw_cb(). However,
request_firmware_nowait() can fail without calling regdb_fw_cb() and
thus leak memory.
Fixes: 007f6c5e6e ("cfg80211: support loading regulatory database as firmware file")
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ieee80211_register_hw free the allocated cipher suites when
registering wiphy fail, and ieee80211_free_hw will re-free it.
set wiphy_ciphers_allocated to false after freeing allocated
cipher suites.
Signed-off-by: taozhang <taozhang@bestechnic.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
All we're going to do with this pointer is assign it to
another __rcu pointer, but sparse can't see that, so
use rcu_access_pointer() to silence the warning here.
Fixes: c90b93b5b7 ("wifi: cfg80211: update hidden BSSes to avoid WARN_ON")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Clean up the struct for hardware_path and drop the struct device_path
with a proper assignment of bc[] and mod members as signed chars.
This patch prepares for the kbuild change from Jason A. Donenfeld to
treat char as always unsigned.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
The file name of this driver is misleading - it handles various serial
ports on parisc machines, not just such on the GSC bus.
Rename the file to make this clearer.
Suggested-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Although the name of the driver 8250_gsc.c suggests that it handles
only serial ports on the GSC bus, it does handle serial ports listed
in the parisc machine inventory as well, e.g. the serial ports in a
C8000 PCI-only workstation.
Change the dependency to CONFIG_PARISC, so that the driver gets included
in the kernel even if CONFIG_GSC isn't set.
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Writes to the device must include an offset and size as defined in
CXL 2.0 8.2.9.5.2.4 Set LSA (Opcode 4103h)
Fixes tag is non obvious as this code has been through several
reworks and variable names + wasn't in use until the addition
of the region code.
Due to a bug in QEMU CXL emulation this overrun resulted in QEMU
crashing.
Reported-by: Bobo WL <lmw.bobo@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Fixes: 60b8f17215 ("cxl/pmem: Translate NVDIMM label commands to CXL label commands")
Link: https://lore.kernel.org/r/20220815154044.24733-3-Jonathan.Cameron@huawei.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Not all decoders have a commit callback.
The CXL specification allows a host bridge with a single root port to
have no explicit HDM decoders. Currently the region driver assumes there
are none. As such the CXL core creates a special pass through decoder
instance without a commit callback.
Prior to this patch, the ->commit() callback was called unconditionally.
Thus a configuration with 1 Host Bridge, 1 Root Port, 1 switch with
multiple downstream ports below which there are multiple CXL type 3
devices results in a situation where committing the region causes a null
pointer dereference.
Reported-by: Bobo WL <lmw.bobo@gmail.com>
Fixes: 176baefb2e ("cxl/hdm: Commit decoder state to hardware")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20220818164210.2084-1-Jonathan.Cameron@huawei.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
kmemleak reported a sequence of memory leaks, and one of them indicated we
failed to free a pointer:
comm "mount", pid 19610, jiffies 4297086464 (age 60.635s)
hex dump (first 8 bytes):
73 64 61 00 81 88 ff ff sda.....
backtrace:
[<00000000d77f3e04>] kstrdup_const+0x46/0x70
[<00000000e51fa804>] kobject_set_name_vargs+0x2f/0xb0
[<00000000247cd595>] kobject_init_and_add+0xb0/0x120
[<00000000f9139aaf>] xfs_mountfs+0x367/0xfc0
[<00000000250d3caf>] xfs_fs_fill_super+0xa16/0xdc0
[<000000008d873d38>] get_tree_bdev+0x256/0x390
[<000000004881f3fa>] vfs_get_tree+0x41/0xf0
[<000000008291ab52>] path_mount+0x9b3/0xdd0
[<0000000022ba8f2d>] __x64_sys_mount+0x190/0x1d0
As mentioned in kobject_init_and_add() comment, if this function
returns an error, kobject_put() must be called to properly clean up
the memory associated with the object. Apparently, xfs_sysfs_init()
does not follow such a requirement. When kobject_init_and_add()
returns an error, the space of kobj->kobject.name alloced by
kstrdup_const() is unfree, which will cause the above stack.
Fix it by adding kobject_put() when kobject_init_and_add returns an
error.
Fixes: a31b1d3d89 ("xfs: add xfs_mount sysfs kobject")
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The assignment to pointer lip is not really required, the pointer lip
is redundant and can be removed.
Cleans up clang-scan warning:
warning: Although the value stored to 'lip' is used in the enclosing
expression, the value is never actually read from 'lip'
[deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
There's a race in fuse's readdir cache that can result in an uninitilized
page being read. The page lock is supposed to prevent this from happening
but in the following case it doesn't:
Two fuse_add_dirent_to_cache() start out and get the same parameters
(size=0,offset=0). One of them wins the race to create and lock the page,
after which it fills in data, sets rdc.size and unlocks the page.
In the meantime the page gets evicted from the cache before the other
instance gets to run. That one also creates the page, but finds the
size to be mismatched, bails out and leaves the uninitialized page in the
cache.
Fix by marking a filled page uptodate and ignoring non-uptodate pages.
Reported-by: Frank Sorenson <fsorenso@redhat.com>
Fixes: 5d7bc7e868 ("fuse: allow using readdir cache")
Cc: <stable@vger.kernel.org> # v4.20
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When the idxd_user_drv driver is bound to a Work Queue (WQ) device
without IOMMU or with IOMMU Passthrough without Shared Virtual
Addressing (SVA), the application gains direct access to physical
memory via the device by programming physical address to a submitted
descriptor. This allows direct userspace read and write access to
arbitrary physical memory. This is inconsistent with the security
goals of a good kernel API.
Unlike vfio_pci driver, the IDXD char device driver does not provide any
ways to pin user pages and translate the address from user VA to IOVA or
PA without IOMMU SVA. Therefore the application has no way to instruct the
device to perform DMA function. This makes the char device not usable for
normal application usage.
Since user type WQ without SVA cannot be used for normal application usage
and presents the security issue, bind idxd_user_drv driver and enable user
type WQ only when SVA is enabled (i.e. user PASID is enabled).
Fixes: 448c3de8ac ("dmaengine: idxd: create user driver for wq 'device'")
Cc: stable@vger.kernel.org
Suggested-by: Arjan Van De Ven <arjan.van.de.ven@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20221014222541.3912195-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
New bool m2m_hw has been added at the end of stm32_mdma_chan_config struct
to support the STM32 DMA MDMA chaining.
m2m_hw is set true in stm32_mdma_slave_config() if peripheral_size is set,
but m2m_hw is never initialized false.
To ensure this case, and any further new update of the structure, memset it
to 0 before using it.
Fixes: 6968743227 ("dmaengine: stm32-mdma: add support to be triggered by STM32 DMA")
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20221017131413.202567-1-amelie.delaunay@foss.st.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Commit 13bac86195 ("IB/hfi1: Fix abba locking issue with sc_disable()")
incorrectly tries to move a list from one list head to another. The
result is a kernel crash.
The crash is triggered when a link goes down and there are waiters for a
send to complete. The following signature is seen:
BUG: kernel NULL pointer dereference, address: 0000000000000030
[...]
Call Trace:
sc_disable+0x1ba/0x240 [hfi1]
pio_freeze+0x3d/0x60 [hfi1]
handle_freeze+0x27/0x1b0 [hfi1]
process_one_work+0x1b0/0x380
? process_one_work+0x380/0x380
worker_thread+0x30/0x360
? process_one_work+0x380/0x380
kthread+0xd7/0x100
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
The fix is to use the correct call to move the list.
Fixes: 13bac86195 ("IB/hfi1: Fix abba locking issue with sc_disable()")
Signed-off-by: Dean Luick <dean.luick@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Link: https://lore.kernel.org/r/166610327042.674422.6146908799669288976.stgit@awfm-02.cornelisnetworks.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Commit 27cfde795a ("RDMA/cma: Fix arguments order in net device
validation") swapped the src and dst addresses in the call to
validate_net_dev().
As a consequence, the test in validate_ipv4_net_dev() to see if the
net_dev is the right one, is incorrect for port 1 <-> 2 communication when
the ports are on the same sub-net. This is fixed by denoting the
flowi4_oif as the device instead of the incoming one.
The bug has not been observed using IPv6 addresses.
Fixes: 27cfde795a ("RDMA/cma: Fix arguments order in net device validation")
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Link: https://lore.kernel.org/r/20221012141542.16925-1-haakon.bugge@oracle.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
KASAN reported a UAF bug when I was running xfs/235:
BUG: KASAN: use-after-free in xlog_recover_process_intents+0xa77/0xae0 [xfs]
Read of size 8 at addr ffff88804391b360 by task mount/5680
CPU: 2 PID: 5680 Comm: mount Not tainted 6.0.0-xfsx #6.0.0 77e7b52a4943a975441e5ac90a5ad7748b7867f6
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
print_report.cold+0x2cc/0x682
kasan_report+0xa3/0x120
xlog_recover_process_intents+0xa77/0xae0 [xfs fb841c7180aad3f8359438576e27867f5795667e]
xlog_recover_finish+0x7d/0x970 [xfs fb841c7180aad3f8359438576e27867f5795667e]
xfs_log_mount_finish+0x2d7/0x5d0 [xfs fb841c7180aad3f8359438576e27867f5795667e]
xfs_mountfs+0x11d4/0x1d10 [xfs fb841c7180aad3f8359438576e27867f5795667e]
xfs_fs_fill_super+0x13d5/0x1a80 [xfs fb841c7180aad3f8359438576e27867f5795667e]
get_tree_bdev+0x3da/0x6e0
vfs_get_tree+0x7d/0x240
path_mount+0xdd3/0x17d0
__x64_sys_mount+0x1fa/0x270
do_syscall_64+0x2b/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7ff5bc069eae
Code: 48 8b 0d 85 1f 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 52 1f 0f 00 f7 d8 64 89 01 48
RSP: 002b:00007ffe433fd448 EFLAGS: 00000246 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007ff5bc069eae
RDX: 00005575d7213290 RSI: 00005575d72132d0 RDI: 00005575d72132b0
RBP: 00005575d7212fd0 R08: 00005575d7213230 R09: 00005575d7213fe0
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00005575d7213290 R14: 00005575d72132b0 R15: 00005575d7212fd0
</TASK>
Allocated by task 5680:
kasan_save_stack+0x1e/0x40
__kasan_slab_alloc+0x66/0x80
kmem_cache_alloc+0x152/0x320
xfs_rui_init+0x17a/0x1b0 [xfs]
xlog_recover_rui_commit_pass2+0xb9/0x2e0 [xfs]
xlog_recover_items_pass2+0xe9/0x220 [xfs]
xlog_recover_commit_trans+0x673/0x900 [xfs]
xlog_recovery_process_trans+0xbe/0x130 [xfs]
xlog_recover_process_data+0x103/0x2a0 [xfs]
xlog_do_recovery_pass+0x548/0xc60 [xfs]
xlog_do_log_recovery+0x62/0xc0 [xfs]
xlog_do_recover+0x73/0x480 [xfs]
xlog_recover+0x229/0x460 [xfs]
xfs_log_mount+0x284/0x640 [xfs]
xfs_mountfs+0xf8b/0x1d10 [xfs]
xfs_fs_fill_super+0x13d5/0x1a80 [xfs]
get_tree_bdev+0x3da/0x6e0
vfs_get_tree+0x7d/0x240
path_mount+0xdd3/0x17d0
__x64_sys_mount+0x1fa/0x270
do_syscall_64+0x2b/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Freed by task 5680:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_set_free_info+0x20/0x30
____kasan_slab_free+0x144/0x1b0
slab_free_freelist_hook+0xab/0x180
kmem_cache_free+0x1f1/0x410
xfs_rud_item_release+0x33/0x80 [xfs]
xfs_trans_free_items+0xc3/0x220 [xfs]
xfs_trans_cancel+0x1fa/0x590 [xfs]
xfs_rui_item_recover+0x913/0xd60 [xfs]
xlog_recover_process_intents+0x24e/0xae0 [xfs]
xlog_recover_finish+0x7d/0x970 [xfs]
xfs_log_mount_finish+0x2d7/0x5d0 [xfs]
xfs_mountfs+0x11d4/0x1d10 [xfs]
xfs_fs_fill_super+0x13d5/0x1a80 [xfs]
get_tree_bdev+0x3da/0x6e0
vfs_get_tree+0x7d/0x240
path_mount+0xdd3/0x17d0
__x64_sys_mount+0x1fa/0x270
do_syscall_64+0x2b/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
The buggy address belongs to the object at ffff88804391b300
which belongs to the cache xfs_rui_item of size 688
The buggy address is located 96 bytes inside of
688-byte region [ffff88804391b300, ffff88804391b5b0)
The buggy address belongs to the physical page:
page:ffffea00010e4600 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888043919320 pfn:0x43918
head:ffffea00010e4600 order:2 compound_mapcount:0 compound_pincount:0
flags: 0x4fff80000010200(slab|head|node=1|zone=1|lastcpupid=0xfff)
raw: 04fff80000010200 0000000000000000 dead000000000122 ffff88807f0eadc0
raw: ffff888043919320 0000000080140010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff88804391b200: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff88804391b280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
>ffff88804391b300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff88804391b380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff88804391b400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
The test fuzzes an rmap btree block and starts writer threads to induce
a filesystem shutdown on the corrupt block. When the filesystem is
remounted, recovery will try to replay the committed rmap intent item,
but the corruption problem causes the recovery transaction to fail.
Cancelling the transaction frees the RUD, which frees the RUI that we
recovered.
When we return to xlog_recover_process_intents, @lip is now a dangling
pointer, and we cannot use it to find the iop_recover method for the
tracepoint. Hence we must store the item ops before calling
->iop_recover if we want to give it to the tracepoint so that the trace
data will tell us exactly which intent item failed.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Add custom I2C accessors to this driver, since the regular I2C regmap ones
do not generate the exact I2C transfers required by the chip. On I2C write,
it is mandatory to send transfer length first, on read the chip returns the
transfer length in first byte. Instead of always reading back 8 bytes, which
is the default and also the size of the entire register file, set BCP register
to 1 to read out 1 byte which is less wasteful.
Fixes: 892e0ddea1 ("clk: rs9: Add Renesas 9-series PCIe clock generator driver")
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20220929195521.284497-1-marex@denx.de
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Commit a88520bfc0 ("usb: gadget: tegra: Reduce pad power") added calls
to tegra_phy_xusb_utmi_pad_power_on/down in the Tegra XUDC driver to
control the pad power. This change is causing a kernel panic when
powering down the pads on entering suspend with the Jetson TX2 platform.
The panic occurs because the 'xudc->curr_utmi_phy' is not configured on
this platform and we do not check to see if the pointer is valid before
attempting to deference the pointer. Fix this by checking to see if the
'phy' pointer passed to tegra_phy_xusb_utmi_pad_power_on/down is valid.
Fixes: a88520bfc0 ("usb: gadget: tegra: Reduce pad power")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20221010135132.30809-1-jonathanh@nvidia.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
