Linux 4.6

Pull x86 fix from Thomas Gleixner:
 "Just the missing compat entry for the new pread/writev2"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Use compat version for preadv2 and pwritev2

.mailmap

@@ -48,6 +48,9 @@ Felix Kuhling <fxkuehl@gmx.de>
 Felix Moeller <felix@derklecks.de>
 Filipe Lautert <filipe@icewall.org>
 Franck Bui-Huu <vagabon.xyz@gmail.com>
+Frank Rowand <frowand.list@gmail.com> <frowand@mvista.com>
+Frank Rowand <frowand.list@gmail.com> <frank.rowand@am.sony.com>
+Frank Rowand <frowand.list@gmail.com> <frank.rowand@sonymobile.com>
 Frank Zago <fzago@systemfabricworks.com>
 Greg Kroah-Hartman <greg@echidna.(none)>
 Greg Kroah-Hartman <gregkh@suse.de>
@@ -66,6 +69,7 @@ Jean Tourrilhes <jt@hpl.hp.com>
 Jeff Garzik <jgarzik@pretzel.yyz.us>
 Jens Axboe <axboe@suse.de>
 Jens Osterkamp <Jens.Osterkamp@de.ibm.com>
+John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
 John Stultz <johnstul@us.ibm.com>
 <josh@joshtriplett.org> <josh@freedesktop.org>
 <josh@joshtriplett.org> <josh@kernel.org>
@@ -79,6 +83,7 @@ Kay Sievers <kay.sievers@vrfy.org>
 Kenneth W Chen <kenneth.w.chen@intel.com>
 Konstantin Khlebnikov <koct9i@gmail.com> <k.khlebnikov@samsung.com>
 Koushik <raghavendra.koushik@neterion.com>
+Krzysztof Kozlowski <krzk@kernel.org> <k.kozlowski.k@gmail.com>
 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
 Leonid I Ananiev <leonid.i.ananiev@intel.com>
 Linas Vepstas <linas@austin.ibm.com>

Documentation/devicetree/bindings/arc/archs-pct.txt

@@ -2,7 +2,7 @@
 
 The ARC HS can be configured with a pipeline performance monitor for counting
 CPU and cache events like cache misses and hits. Like conventional PCT there
-are 100+ hardware conditions dynamically mapped to upto 32 counters.
+are 100+ hardware conditions dynamically mapped to up to 32 counters.
 It also supports overflow interrupts.
 
 Required properties:

Documentation/devicetree/bindings/arc/pct.txt

@@ -2,7 +2,7 @@
 
 The ARC700 can be configured with a pipeline performance monitor for counting
 CPU and cache events like cache misses and hits. Like conventional PCT there
-are 100+ hardware conditions dynamically mapped to upto 32 counters
+are 100+ hardware conditions dynamically mapped to up to 32 counters
 
 Note that:
  * The ARC 700 PCT does not support interrupts; although HW events may be

Documentation/devicetree/bindings/arm/cpus.txt

@@ -192,7 +192,6 @@ nodes to be present and contain the properties described below.
 			  can be one of:
 			    "allwinner,sun6i-a31"
 			    "allwinner,sun8i-a23"
-			    "arm,psci"
 			    "arm,realview-smp"
 			    "brcm,bcm-nsp-smp"
 			    "brcm,brahma-b15"

Documentation/devicetree/bindings/ata/ahci-platform.txt

@@ -32,6 +32,10 @@ Optional properties:
 - target-supply     : regulator for SATA target power
 - phys              : reference to the SATA PHY node
 - phy-names         : must be "sata-phy"
+- ports-implemented : Mask that indicates which ports that the HBA supports
+		      are available for software to use. Useful if PORTS_IMPL
+		      is not programmed by the BIOS, which is true with
+		      some embedded SOC's.
 
 Required properties when using sub-nodes:
 - #address-cells    : number of cells to encode an address

Documentation/devicetree/bindings/i2c/i2c-rk3x.txt

@@ -6,8 +6,8 @@ RK3xxx SoCs.
 Required properties :
 
  - reg : Offset and length of the register set for the device
- - compatible : should be "rockchip,rk3066-i2c", "rockchip,rk3188-i2c" or
-		"rockchip,rk3288-i2c".
+ - compatible : should be "rockchip,rk3066-i2c", "rockchip,rk3188-i2c",
+		"rockchip,rk3228-i2c" or "rockchip,rk3288-i2c".
  - interrupts : interrupt number
  - clocks : parent clock
 

Documentation/devicetree/bindings/net/cpsw.txt

@@ -45,13 +45,13 @@ Required properties:
 Optional properties:
 - dual_emac_res_vlan	: Specifies VID to be used to segregate the ports
 - mac-address		: See ethernet.txt file in the same directory
-- phy_id		: Specifies slave phy id
+- phy_id		: Specifies slave phy id (deprecated, use phy-handle)
 - phy-handle		: See ethernet.txt file in the same directory
 
 Slave sub-nodes:
 - fixed-link		: See fixed-link.txt file in the same directory
-			  Either the property phy_id, or the sub-node
-			  fixed-link can be specified
+
+Note: Exactly one of phy_id, phy-handle, or fixed-link must be specified.
 
 Note: "ti,hwmods" field is used to fetch the base address and irq
 resources from TI, omap hwmod data base during device registration.

Documentation/devicetree/bindings/net/mediatek-net.txt

@@ -9,7 +9,8 @@ have dual GMAC each represented by a child node..
 Required properties:
 - compatible: Should be "mediatek,mt7623-eth"
 - reg: Address and length of the register set for the device
-- interrupts: Should contain the frame engines interrupt
+- interrupts: Should contain the three frame engines interrupts in numeric
+	order. These are fe_int0, fe_int1 and fe_int2.
 - clocks: the clock used by the core
 - clock-names: the names of the clock listed in the clocks property. These are
 	"ethif", "esw", "gp2", "gp1"
@@ -42,7 +43,9 @@ eth: ethernet@1b100000 {
 		 <&ethsys CLK_ETHSYS_GP2>,
 		 <&ethsys CLK_ETHSYS_GP1>;
 	clock-names = "ethif", "esw", "gp2", "gp1";
-	interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW>;
+	interrupts = <GIC_SPI 200 IRQ_TYPE_LEVEL_LOW
+		      GIC_SPI 199 IRQ_TYPE_LEVEL_LOW
+		      GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>;
 	power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
 	resets = <&ethsys MT2701_ETHSYS_ETH_RST>;
 	reset-names = "eth";

Documentation/devicetree/bindings/phy/rockchip-dp-phy.txt

@@ -8,15 +8,19 @@ Required properties:
 	of memory mapped region.
 - clock-names: from common clock binding:
 	Required elements: "24m"
-- rockchip,grf: phandle to the syscon managing the "general register files"
 - #phy-cells : from the generic PHY bindings, must be 0;
 
 Example:
 
-edp_phy: edp-phy {
-	compatible = "rockchip,rk3288-dp-phy";
-	rockchip,grf = <&grf>;
-	clocks = <&cru SCLK_EDP_24M>;
-	clock-names = "24m";
-	#phy-cells = <0>;
+grf: syscon@ff770000 {
+	compatible = "rockchip,rk3288-grf", "syscon", "simple-mfd";
+
+...
+
+	edp_phy: edp-phy {
+		compatible = "rockchip,rk3288-dp-phy";
+		clocks = <&cru SCLK_EDP_24M>;
+		clock-names = "24m";
+		#phy-cells = <0>;
+	};
 };

Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt

@@ -3,17 +3,23 @@ Rockchip EMMC PHY
 
 Required properties:
  - compatible: rockchip,rk3399-emmc-phy
- - rockchip,grf : phandle to the syscon managing the "general
-   register files"
  - #phy-cells: must be 0
- - reg: PHY configure reg address offset in "general
+ - reg: PHY register address offset and length in "general
    register files"
 
 Example:
 
-emmcphy: phy {
-	compatible = "rockchip,rk3399-emmc-phy";
-	rockchip,grf = <&grf>;
-	reg = <0xf780>;
-	#phy-cells = <0>;
+
+grf: syscon@ff770000 {
+	compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+...
+
+	emmcphy: phy@f780 {
+		compatible = "rockchip,rk3399-emmc-phy";
+		reg = <0xf780 0x20>;
+		#phy-cells = <0>;
+	};
 };

Documentation/devicetree/bindings/regmap/regmap.txt

@@ -1,50 +1,29 @@
-Device-Tree binding for regmap
-
-The endianness mode of CPU & Device scenarios:
-Index     Device     Endianness properties
----------------------------------------------------
-1         BE         'big-endian'
-2         LE         'little-endian'
-3	  Native     'native-endian'
-
-For one device driver, which will run in different scenarios above
-on different SoCs using the devicetree, we need one way to simplify
-this.
+Devicetree binding for regmap
 
 Optional properties:
-- {big,little,native}-endian: these are boolean properties, if absent
-  then the implementation will choose a default based on the device
-  being controlled.  These properties are for register values and all
-  the buffers only.  Native endian means that the CPU and device have
-  the same endianness.
+
+   little-endian,
+   big-endian,
+   native-endian:	See common-properties.txt for a definition
+
+Note:
+Regmap defaults to little-endian register access on MMIO based
+devices, this is by far the most common setting. On CPU
+architectures that typically run big-endian operating systems
+(e.g. PowerPC), registers can be defined as big-endian and must
+be marked that way in the devicetree.
+
+On SoCs that can be operated in both big-endian and little-endian
+modes, with a single hardware switch controlling both the endianess
+of the CPU and a byteswap for MMIO registers (e.g. many Broadcom MIPS
+chips), "native-endian" is used to allow using the same device tree
+blob in both cases.
 
 Examples:
-Scenario 1 : CPU in LE mode & device in LE mode.
+Scenario 1 : a register set in big-endian mode.
 dev: dev@40031000 {
-	      compatible = "name";
+	      compatible = "syscon";
 	      reg = <0x40031000 0x1000>;
-	      ...
-};
-
-Scenario 2 : CPU in LE mode & device in BE mode.
-dev: dev@40031000 {
-	      compatible = "name";
-	      reg = <0x40031000 0x1000>;
-	      ...
 	      big-endian;
-};
-
-Scenario 3 : CPU in BE mode & device in BE mode.
-dev: dev@40031000 {
-	      compatible = "name";
-	      reg = <0x40031000 0x1000>;
 	      ...
 };
-
-Scenario 4 : CPU in BE mode & device in LE mode.
-dev: dev@40031000 {
-	      compatible = "name";
-	      reg = <0x40031000 0x1000>;
-	      ...
-	      little-endian;
-};

Documentation/devicetree/bindings/rtc/s3c-rtc.txt

@@ -15,9 +15,10 @@ Required properties:
   is the rtc tick interrupt. The number of cells representing a interrupt
   depends on the parent interrupt controller.
 - clocks: Must contain a list of phandle and clock specifier for the rtc
-          and source clocks.
-- clock-names: Must contain "rtc" and "rtc_src" entries sorted in the
-               same order as the clocks property.
+          clock and in the case of a s3c6410 compatible controller, also
+          a source clock.
+- clock-names: Must contain "rtc" and for a s3c6410 compatible controller,
+               a "rtc_src" sorted in the same order as the clocks property.
 
 Example:
 

Documentation/input/event-codes.txt

@@ -173,6 +173,10 @@ A few EV_ABS codes have special meanings:
     proximity of the device and while the value of the BTN_TOUCH code is 0. If
     the input device may be used freely in three dimensions, consider ABS_Z
     instead.
+  - BTN_TOOL_<name> should be set to 1 when the tool comes into detectable
+    proximity and set to 0 when the tool leaves detectable proximity.
+    BTN_TOOL_<name> signals the type of tool that is currently detected by the
+    hardware and is otherwise independent of ABS_DISTANCE and/or BTN_TOUCH.
 
 * ABS_MT_<name>:
   - Used to describe multitouch input events. Please see

Documentation/networking/altera_tse.txt

@@ -6,7 +6,7 @@ This is the driver for the Altera Triple-Speed Ethernet (TSE) controllers
 using the SGDMA and MSGDMA soft DMA IP components. The driver uses the
 platform bus to obtain component resources. The designs used to test this
 driver were built for a Cyclone(R) V SOC FPGA board, a Cyclone(R) V FPGA board,
-and tested with ARM and NIOS processor hosts seperately. The anticipated use
+and tested with ARM and NIOS processor hosts separately. The anticipated use
 cases are simple communications between an embedded system and an external peer
 for status and simple configuration of the embedded system.
 
@@ -65,14 +65,14 @@ Driver parameters can be also passed in command line by using:
 4.1) Transmit process
 When the driver's transmit routine is called by the kernel, it sets up a
 transmit descriptor by calling the underlying DMA transmit routine (SGDMA or
-MSGDMA), and initites a transmit operation. Once the transmit is complete, an
+MSGDMA), and initiates a transmit operation. Once the transmit is complete, an
 interrupt is driven by the transmit DMA logic. The driver handles the transmit
 completion in the context of the interrupt handling chain by recycling
 resource required to send and track the requested transmit operation.
 
 4.2) Receive process
 The driver will post receive buffers to the receive DMA logic during driver
-intialization. Receive buffers may or may not be queued depending upon the
+initialization. Receive buffers may or may not be queued depending upon the
 underlying DMA logic (MSGDMA is able queue receive buffers, SGDMA is not able
 to queue receive buffers to the SGDMA receive logic). When a packet is
 received, the DMA logic generates an interrupt. The driver handles a receive

Documentation/networking/checksum-offloads.txt

@@ -69,18 +69,18 @@ LCO: Local Checksum Offload
 LCO is a technique for efficiently computing the outer checksum of an
  encapsulated datagram when the inner checksum is due to be offloaded.
 The ones-complement sum of a correctly checksummed TCP or UDP packet is
- equal to the sum of the pseudo header, because everything else gets
- 'cancelled out' by the checksum field.  This is because the sum was
+ equal to the complement of the sum of the pseudo header, because everything
+ else gets 'cancelled out' by the checksum field.  This is because the sum was
  complemented before being written to the checksum field.
 More generally, this holds in any case where the 'IP-style' ones complement
  checksum is used, and thus any checksum that TX Checksum Offload supports.
 That is, if we have set up TX Checksum Offload with a start/offset pair, we
- know that _after the device has filled in that checksum_, the ones
+ know that after the device has filled in that checksum, the ones
  complement sum from csum_start to the end of the packet will be equal to
- _whatever value we put in the checksum field beforehand_.  This allows us
- to compute the outer checksum without looking at the payload: we simply
- stop summing when we get to csum_start, then add the 16-bit word at
- (csum_start + csum_offset).
+ the complement of whatever value we put in the checksum field beforehand.
+ This allows us to compute the outer checksum without looking at the payload:
+ we simply stop summing when we get to csum_start, then add the complement of
+ the 16-bit word at (csum_start + csum_offset).
 Then, when the true inner checksum is filled in (either by hardware or by
  skb_checksum_help()), the outer checksum will become correct by virtue of
  the arithmetic.

Documentation/networking/ipvlan.txt

@@ -8,7 +8,7 @@ Initial Release:
 	This is conceptually very similar to the macvlan driver with one major
 exception of using L3 for mux-ing /demux-ing among slaves. This property makes
 the master device share the L2 with it's slave devices. I have developed this
-driver in conjuntion with network namespaces and not sure if there is use case
+driver in conjunction with network namespaces and not sure if there is use case
 outside of it.
 
 
@@ -42,7 +42,7 @@ out. In this mode the slaves will RX/TX multicast and broadcast (if applicable)
 as well.
 
 4.2 L3 mode:
-	In this mode TX processing upto L3 happens on the stack instance attached
+	In this mode TX processing up to L3 happens on the stack instance attached
 to the slave device and packets are switched to the stack instance of the
 master device for the L2 processing and routing from that instance will be
 used before packets are queued on the outbound device. In this mode the slaves
@@ -56,7 +56,7 @@ situations defines your use case then you can choose to use ipvlan -
 	(a) The Linux host that is connected to the external switch / router has
 policy configured that allows only one mac per port.
 	(b) No of virtual devices created on a master exceed the mac capacity and
-puts the NIC in promiscous mode and degraded performance is a concern.
+puts the NIC in promiscuous mode and degraded performance is a concern.
 	(c) If the slave device is to be put into the hostile / untrusted network
 namespace where L2 on the slave could be changed / misused.
 

Documentation/networking/pktgen.txt

@@ -67,12 +67,12 @@ The two basic thread commands are:
  * add_device DEVICE@NAME -- adds a single device
  * rem_device_all         -- remove all associated devices
 
-When adding a device to a thread, a corrosponding procfile is created
+When adding a device to a thread, a corresponding procfile is created
 which is used for configuring this device. Thus, device names need to
 be unique.
 
 To support adding the same device to multiple threads, which is useful
-with multi queue NICs, a the device naming scheme is extended with "@":
+with multi queue NICs, the device naming scheme is extended with "@":
  device@something
 
 The part after "@" can be anything, but it is custom to use the thread
@@ -221,7 +221,7 @@ Sample scripts
 
 A collection of tutorial scripts and helpers for pktgen is in the
 samples/pktgen directory. The helper parameters.sh file support easy
-and consistant parameter parsing across the sample scripts.
+and consistent parameter parsing across the sample scripts.
 
 Usage example and help:
  ./pktgen_sample01_simple.sh -i eth4 -m 00:1B:21:3C:9D:F8 -d 192.168.8.2

Documentation/networking/vrf.txt

@@ -41,7 +41,7 @@ using an rx_handler which gives the impression that packets flow through
 the VRF device. Similarly on egress routing rules are used to send packets
 to the VRF device driver before getting sent out the actual interface. This
 allows tcpdump on a VRF device to capture all packets into and out of the
-VRF as a whole.[1] Similiarly, netfilter [2] and tc rules can be applied
+VRF as a whole.[1] Similarly, netfilter [2] and tc rules can be applied
 using the VRF device to specify rules that apply to the VRF domain as a whole.
 
 [1] Packets in the forwarded state do not flow through the device, so those

Documentation/networking/xfrm_sync.txt

@@ -4,7 +4,7 @@ Krisztian <hidden@balabit.hu> and others and additional patches
 from Jamal <hadi@cyberus.ca>.
 
 The end goal for syncing is to be able to insert attributes + generate
-events so that the an SA can be safely moved from one machine to another
+events so that the SA can be safely moved from one machine to another
 for HA purposes.
 The idea is to synchronize the SA so that the takeover machine can do
 the processing of the SA as accurate as possible if it has access to it.
@@ -13,7 +13,7 @@ We already have the ability to generate SA add/del/upd events.
 These patches add ability to sync and have accurate lifetime byte (to
 ensure proper decay of SAs) and replay counters to avoid replay attacks
 with as minimal loss at failover time.
-This way a backup stays as closely uptodate as an active member.
+This way a backup stays as closely up-to-date as an active member.
 
 Because the above items change for every packet the SA receives,
 it is possible for a lot of the events to be generated.
@@ -163,7 +163,7 @@ If you have an SA that is getting hit by traffic in bursts such that
 there is a period where the timer threshold expires with no packets
 seen, then an odd behavior is seen as follows:
 The first packet arrival after a timer expiry will trigger a timeout
-aevent; i.e we dont wait for a timeout period or a packet threshold
+event; i.e we don't wait for a timeout period or a packet threshold
 to be reached. This is done for simplicity and efficiency reasons.
 
 -JHS

Documentation/sysctl/kernel.txt

@@ -645,7 +645,7 @@ allowed to execute.
 perf_event_paranoid:
 
 Controls use of the performance events system by unprivileged
-users (without CAP_SYS_ADMIN).  The default value is 1.
+users (without CAP_SYS_ADMIN).  The default value is 2.
 
  -1: Allow use of (almost) all events by all users
 >=0: Disallow raw tracepoint access by users without CAP_IOC_LOCK

Documentation/sysctl/vm.txt

@@ -581,15 +581,16 @@ Specify "[Nn]ode" for node order
 "Zone Order" orders the zonelists by zone type, then by node within each
 zone.  Specify "[Zz]one" for zone order.
 
-Specify "[Dd]efault" to request automatic configuration.  Autoconfiguration
-will select "node" order in following case.
-(1) if the DMA zone does not exist or
-(2) if the DMA zone comprises greater than 50% of the available memory or
-(3) if any node's DMA zone comprises greater than 70% of its local memory and
-    the amount of local memory is big enough.
+Specify "[Dd]efault" to request automatic configuration.
 
-Otherwise, "zone" order will be selected. Default order is recommended unless
-this is causing problems for your system/application.
+On 32-bit, the Normal zone needs to be preserved for allocations accessible
+by the kernel, so "zone" order will be selected.
+
+On 64-bit, devices that require DMA32/DMA are relatively rare, so "node"
+order will be selected.
+
+Default order is recommended unless this is causing problems for your
+system/application.
 
 ==============================================================
 

Documentation/x86/x86_64/mm.txt

@@ -19,7 +19,7 @@ ffffff0000000000 - ffffff7fffffffff (=39 bits) %esp fixup stacks
 ffffffef00000000 - ffffffff00000000 (=64 GB) EFI region mapping space
 ... unused hole ...
 ffffffff80000000 - ffffffffa0000000 (=512 MB)  kernel text mapping, from phys 0
-ffffffffa0000000 - ffffffffff5fffff (=1525 MB) module mapping space
+ffffffffa0000000 - ffffffffff5fffff (=1526 MB) module mapping space
 ffffffffff600000 - ffffffffffdfffff (=8 MB) vsyscalls
 ffffffffffe00000 - ffffffffffffffff (=2 MB) unused hole
 
@@ -31,8 +31,8 @@ vmalloc space is lazily synchronized into the different PML4 pages of
 the processes using the page fault handler, with init_level4_pgt as
 reference.
 
-Current X86-64 implementations only support 40 bits of address space,
-but we support up to 46 bits. This expands into MBZ space in the page tables.
+Current X86-64 implementations support up to 46 bits of address space (64 TB),
+which is our current limit. This expands into MBZ space in the page tables.
 
 We map EFI runtime services in the 'efi_pgd' PGD in a 64Gb large virtual
 memory window (this size is arbitrary, it can be raised later if needed).

MAINTAINERS

@@ -872,9 +872,9 @@ F:	drivers/perf/arm_pmu.c
 F:	include/linux/perf/arm_pmu.h
 
 ARM PORT
-M:	Russell King <linux@arm.linux.org.uk>
+M:	Russell King <linux@armlinux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.arm.linux.org.uk/
+W:	http://www.armlinux.org.uk/
 S:	Maintained
 F:	arch/arm/
 
@@ -886,35 +886,35 @@ F:	arch/arm/plat-*/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git
 
 ARM PRIMECELL AACI PL041 DRIVER
-M:	Russell King <linux@arm.linux.org.uk>
+M:	Russell King <linux@armlinux.org.uk>
 S:	Maintained
 F:	sound/arm/aaci.*
 
 ARM PRIMECELL CLCD PL110 DRIVER
-M:	Russell King <linux@arm.linux.org.uk>
+M:	Russell King <linux@armlinux.org.uk>
 S:	Maintained
 F:	drivers/video/fbdev/amba-clcd.*
 
 ARM PRIMECELL KMI PL050 DRIVER
-M:	Russell King <linux@arm.linux.org.uk>
+M:	Russell King <linux@armlinux.org.uk>
 S:	Maintained
 F:	drivers/input/serio/ambakmi.*
 F:	include/linux/amba/kmi.h
 
 ARM PRIMECELL MMCI PL180/1 DRIVER
-M:	Russell King <linux@arm.linux.org.uk>
+M:	Russell King <linux@armlinux.org.uk>
 S:	Maintained
 F:	drivers/mmc/host/mmci.*
 F:	include/linux/amba/mmci.h
 
 ARM PRIMECELL UART PL010 AND PL011 DRIVERS
-M:	Russell King <linux@arm.linux.org.uk>
+M:	Russell King <linux@armlinux.org.uk>
 S:	Maintained
 F:	drivers/tty/serial/amba-pl01*.c
 F:	include/linux/amba/serial.h
 
 ARM PRIMECELL BUS SUPPORT
-M:	Russell King <linux@arm.linux.org.uk>
+M:	Russell King <linux@armlinux.org.uk>
 S:	Maintained
 F:	drivers/amba/
 F:	include/linux/amba/bus.h
@@ -1036,7 +1036,7 @@ L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 
 ARM/CLKDEV SUPPORT
-M:	Russell King <linux@arm.linux.org.uk>
+M:	Russell King <linux@armlinux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/include/asm/clkdev.h
@@ -1093,9 +1093,9 @@ F:	arch/arm/boot/dts/cx92755*
 N:	digicolor
 
 ARM/EBSA110 MACHINE SUPPORT
-M:	Russell King <linux@arm.linux.org.uk>
+M:	Russell King <linux@armlinux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.arm.linux.org.uk/
+W:	http://www.armlinux.org.uk/
 S:	Maintained
 F:	arch/arm/mach-ebsa110/
 F:	drivers/net/ethernet/amd/am79c961a.*
@@ -1124,9 +1124,9 @@ T:	git git://git.berlios.de/gemini-board
 F:	arch/arm/mm/*-fa*
 
 ARM/FOOTBRIDGE ARCHITECTURE
-M:	Russell King <linux@arm.linux.org.uk>
+M:	Russell King <linux@armlinux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.arm.linux.org.uk/
+W:	http://www.armlinux.org.uk/
 S:	Maintained
 F:	arch/arm/include/asm/hardware/dec21285.h
 F:	arch/arm/mach-footbridge/
@@ -1457,7 +1457,7 @@ S:	Maintained
 ARM/PT DIGITAL BOARD PORT
 M:	Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.arm.linux.org.uk/
+W:	http://www.armlinux.org.uk/
 S:	Maintained
 
 ARM/QUALCOMM SUPPORT
@@ -1493,9 +1493,9 @@ S:	Supported
 F:	arch/arm64/boot/dts/renesas/
 
 ARM/RISCPC ARCHITECTURE
-M:	Russell King <linux@arm.linux.org.uk>
+M:	Russell King <linux@armlinux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.arm.linux.org.uk/
+W:	http://www.armlinux.org.uk/
 S:	Maintained
 F:	arch/arm/include/asm/hardware/entry-macro-iomd.S
 F:	arch/arm/include/asm/hardware/ioc.h
@@ -1773,9 +1773,9 @@ F:	drivers/clk/versatile/clk-vexpress-osc.c
 F:	drivers/clocksource/versatile.c
 
 ARM/VFP SUPPORT
-M:	Russell King <linux@arm.linux.org.uk>
+M:	Russell King <linux@armlinux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.arm.linux.org.uk/
+W:	http://www.armlinux.org.uk/
 S:	Maintained
 F:	arch/arm/vfp/
 
@@ -2921,7 +2921,7 @@ F:	mm/cleancache.c
 F:	include/linux/cleancache.h
 
 CLK API
-M:	Russell King <linux@arm.linux.org.uk>
+M:	Russell King <linux@armlinux.org.uk>
 L:	linux-clk@vger.kernel.org
 S:	Maintained
 F:	include/linux/clk.h
@@ -3354,9 +3354,9 @@ S:	Supported
 F:	drivers/net/ethernet/stmicro/stmmac/
 
 CYBERPRO FB DRIVER
-M:	Russell King <linux@arm.linux.org.uk>
+M:	Russell King <linux@armlinux.org.uk>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-W:	http://www.arm.linux.org.uk/
+W:	http://www.armlinux.org.uk/
 S:	Maintained
 F:	drivers/video/fbdev/cyber2000fb.*
 
@@ -3881,7 +3881,7 @@ F:	Documentation/devicetree/bindings/display/st,stih4xx.txt
 
 DRM DRIVERS FOR VIVANTE GPU IP
 M:	Lucas Stach <l.stach@pengutronix.de>
-R:	Russell King <linux+etnaviv@arm.linux.org.uk>
+R:	Russell King <linux+etnaviv@armlinux.org.uk>
 R:	Christian Gmeiner <christian.gmeiner@gmail.com>
 L:	dri-devel@lists.freedesktop.org
 S:	Maintained
@@ -4223,8 +4223,8 @@ F:	Documentation/efi-stub.txt
 F:	arch/ia64/kernel/efi.c
 F:	arch/x86/boot/compressed/eboot.[ch]
 F:	arch/x86/include/asm/efi.h
-F:	arch/x86/platform/efi/*
-F:	drivers/firmware/efi/*
+F:	arch/x86/platform/efi/
+F:	drivers/firmware/efi/
 F:	include/linux/efi*.h
 
 EFI VARIABLE FILESYSTEM
@@ -4744,7 +4744,7 @@ F:	drivers/platform/x86/fujitsu-tablet.c
 
 FUSE: FILESYSTEM IN USERSPACE
 M:	Miklos Szeredi <miklos@szeredi.hu>
-L:	fuse-devel@lists.sourceforge.net
+L:	linux-fsdevel@vger.kernel.org
 W:	http://fuse.sourceforge.net/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse.git
 S:	Maintained
@@ -4903,7 +4903,7 @@ F:	net/ipv4/gre_offload.c
 F:	include/net/gre.h
 
 GRETH 10/100/1G Ethernet MAC device driver
-M:	Kristoffer Glembo <kristoffer@gaisler.com>
+M:	Andreas Larsson <andreas@gaisler.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/aeroflex/
@@ -6027,7 +6027,7 @@ F:	include/scsi/*iscsi*
 
 ISCSI EXTENSIONS FOR RDMA (ISER) INITIATOR
 M:	Or Gerlitz <ogerlitz@mellanox.com>
-M:	Sagi Grimberg <sagig@mellanox.com>
+M:	Sagi Grimberg <sagi@grimberg.me>
 M:	Roi Dayan <roid@mellanox.com>
 L:	linux-rdma@vger.kernel.org
 S:	Supported
@@ -6037,7 +6037,7 @@ Q:	http://patchwork.kernel.org/project/linux-rdma/list/
 F:	drivers/infiniband/ulp/iser/
 
 ISCSI EXTENSIONS FOR RDMA (ISER) TARGET
-M:	Sagi Grimberg <sagig@mellanox.com>
+M:	Sagi Grimberg <sagi@grimberg.me>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending.git master
 L:	linux-rdma@vger.kernel.org
 L:	target-devel@vger.kernel.org
@@ -6400,7 +6400,7 @@ F:	mm/kmemleak.c
 F:	mm/kmemleak-test.c
 
 KPROBES
-M:	Ananth N Mavinakayanahalli <ananth@in.ibm.com>
+M:	Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
 M:	Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
 M:	"David S. Miller" <davem@davemloft.net>
 M:	Masami Hiramatsu <mhiramat@kernel.org>
@@ -6905,7 +6905,7 @@ L:	linux-man@vger.kernel.org
 S:	Maintained
 
 MARVELL ARMADA DRM SUPPORT
-M:	Russell King <rmk+kernel@arm.linux.org.uk>
+M:	Russell King <rmk+kernel@armlinux.org.uk>
 S:	Maintained
 F:	drivers/gpu/drm/armada/
 
@@ -7905,7 +7905,7 @@ S:	Supported
 F:	drivers/nfc/nxp-nci
 
 NXP TDA998X DRM DRIVER
-M:	Russell King <rmk+kernel@arm.linux.org.uk>
+M:	Russell King <rmk+kernel@armlinux.org.uk>
 S:	Supported
 F:	drivers/gpu/drm/i2c/tda998x_drv.c
 F:	include/drm/i2c/tda998x.h
@@ -7978,7 +7978,7 @@ F:	arch/arm/*omap*/*pm*
 F:	drivers/cpufreq/omap-cpufreq.c
 
 OMAP POWERDOMAIN SOC ADAPTATION LAYER SUPPORT
-M:	Rajendra Nayak <rnayak@ti.com>
+M:	Rajendra Nayak <rnayak@codeaurora.org>
 M:	Paul Walmsley <paul@pwsan.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
@@ -10014,7 +10014,8 @@ F:	drivers/infiniband/hw/ocrdma/
 
 SFC NETWORK DRIVER
 M:	Solarflare linux maintainers <linux-net-drivers@solarflare.com>
-M:	Shradha Shah <sshah@solarflare.com>
+M:	Edward Cree <ecree@solarflare.com>
+M:	Bert Kenward <bkenward@solarflare.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/ethernet/sfc/
@@ -11071,6 +11072,15 @@ S:	Maintained
 F:	drivers/clk/ti/
 F:	include/linux/clk/ti.h
 
+TI ETHERNET SWITCH DRIVER (CPSW)
+M:	Mugunthan V N <mugunthanvnm@ti.com>
+R:	Grygorii Strashko <grygorii.strashko@ti.com>
+L:	linux-omap@vger.kernel.org
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/ethernet/ti/cpsw*
+F:	drivers/net/ethernet/ti/davinci*
+
 TI FLASH MEDIA INTERFACE DRIVER
 M:	Alex Dubov <oakad@yahoo.com>
 S:	Maintained
@@ -11308,6 +11318,20 @@ F:	include/trace/
 F:	kernel/trace/
 F:	tools/testing/selftests/ftrace/
 
+TRACING MMIO ACCESSES (MMIOTRACE)
+M:	Steven Rostedt <rostedt@goodmis.org>
+M:	Ingo Molnar <mingo@kernel.org>
+R:	Karol Herbst <karolherbst@gmail.com>
+R:	Pekka Paalanen <ppaalanen@gmail.com>
+S:	Maintained
+L:	linux-kernel@vger.kernel.org
+L:	nouveau@lists.freedesktop.org
+F:	kernel/trace/trace_mmiotrace.c
+F:	include/linux/mmiotrace.h
+F:	arch/x86/mm/kmmio.c
+F:	arch/x86/mm/mmio-mod.c
+F:	arch/x86/mm/testmmiotrace.c
+
 TRIVIAL PATCHES
 M:	Jiri Kosina <trivial@kernel.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git

Makefile

@@ -1,8 +1,8 @@
 VERSION = 4
 PATCHLEVEL = 6
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
-NAME = Blurry Fish Butt
+EXTRAVERSION =
+NAME = Charred Weasel
 
 # *DOCUMENTATION*
 # To see a list of typical targets execute "make help"
@@ -1008,7 +1008,8 @@ prepare0: archprepare FORCE
 prepare: prepare0 prepare-objtool
 
 ifdef CONFIG_STACK_VALIDATION
-  has_libelf := $(shell echo "int main() {}" | $(HOSTCC) -xc -o /dev/null -lelf - &> /dev/null && echo 1 || echo 0)
+  has_libelf := $(call try-run,\
+		echo "int main() {}" | $(HOSTCC) -xc -o /dev/null -lelf -,1,0)
   ifeq ($(has_libelf),1)
     objtool_target := tools/objtool FORCE
   else

arch/arc/Kconfig

@@ -35,8 +35,10 @@ config ARC
 	select NO_BOOTMEM
 	select OF
 	select OF_EARLY_FLATTREE
+	select OF_RESERVED_MEM
 	select PERF_USE_VMALLOC
 	select HAVE_DEBUG_STACKOVERFLOW
+	select HAVE_GENERIC_DMA_COHERENT
 
 config MIGHT_HAVE_PCI
 	bool
@@ -56,6 +58,9 @@ config GENERIC_CSUM
 config RWSEM_GENERIC_SPINLOCK
 	def_bool y
 
+config ARCH_DISCONTIGMEM_ENABLE
+	def_bool y
+
 config ARCH_FLATMEM_ENABLE
 	def_bool y
 
@@ -345,6 +350,15 @@ config ARC_HUGEPAGE_16M
 
 endchoice
 
+config NODES_SHIFT
+	int "Maximum NUMA Nodes (as a power of 2)"
+	default "1" if !DISCONTIGMEM
+	default "2" if DISCONTIGMEM
+	depends on NEED_MULTIPLE_NODES
+	---help---
+	  Accessing memory beyond 1GB (with or w/o PAE) requires 2 memory
+	  zones.
+
 if ISA_ARCOMPACT
 
 config ARC_COMPACT_IRQ_LEVELS
@@ -453,6 +467,7 @@ config LINUX_LINK_BASE
 
 config HIGHMEM
 	bool "High Memory Support"
+	select DISCONTIGMEM
 	help
 	  With ARC 2G:2G address split, only upper 2G is directly addressable by
 	  kernel. Enable this to potentially allow access to rest of 2G and PAE

arch/arc/include/asm/io.h

@@ -13,6 +13,15 @@
 #include <asm/byteorder.h>
 #include <asm/page.h>
 
+#ifdef CONFIG_ISA_ARCV2
+#include <asm/barrier.h>
+#define __iormb()		rmb()
+#define __iowmb()		wmb()
+#else
+#define __iormb()		do { } while (0)
+#define __iowmb()		do { } while (0)
+#endif
+
 extern void __iomem *ioremap(phys_addr_t paddr, unsigned long size);
 extern void __iomem *ioremap_prot(phys_addr_t paddr, unsigned long size,
 				  unsigned long flags);
@@ -31,6 +40,15 @@ extern void iounmap(const void __iomem *addr);
 #define ioremap_wc(phy, sz)		ioremap(phy, sz)
 #define ioremap_wt(phy, sz)		ioremap(phy, sz)
 
+/*
+ * io{read,write}{16,32}be() macros
+ */
+#define ioread16be(p)		({ u16 __v = be16_to_cpu((__force __be16)__raw_readw(p)); __iormb(); __v; })
+#define ioread32be(p)		({ u32 __v = be32_to_cpu((__force __be32)__raw_readl(p)); __iormb(); __v; })
+
+#define iowrite16be(v,p)	({ __iowmb(); __raw_writew((__force u16)cpu_to_be16(v), p); })
+#define iowrite32be(v,p)	({ __iowmb(); __raw_writel((__force u32)cpu_to_be32(v), p); })
+
 /* Change struct page to physical address */
 #define page_to_phys(page)		(page_to_pfn(page) << PAGE_SHIFT)
 
@@ -108,15 +126,6 @@ static inline void __raw_writel(u32 w, volatile void __iomem *addr)
 
 }
 
-#ifdef CONFIG_ISA_ARCV2
-#include <asm/barrier.h>
-#define __iormb()		rmb()
-#define __iowmb()		wmb()
-#else
-#define __iormb()		do { } while (0)
-#define __iowmb()		do { } while (0)
-#endif
-
 /*
  * MMIO can also get buffered/optimized in micro-arch, so barriers needed
  * Based on ARM model for the typical use case

arch/arc/include/asm/irqflags-arcv2.h

@@ -18,6 +18,12 @@
 #define STATUS_AD_MASK		(1<<STATUS_AD_BIT)
 #define STATUS_IE_MASK		(1<<STATUS_IE_BIT)
 
+/* status32 Bits as encoded/expected by CLRI/SETI */
+#define CLRI_STATUS_IE_BIT	4
+
+#define CLRI_STATUS_E_MASK	0xF
+#define CLRI_STATUS_IE_MASK	(1 << CLRI_STATUS_IE_BIT)
+
 #define AUX_USER_SP		0x00D
 #define AUX_IRQ_CTRL		0x00E
 #define AUX_IRQ_ACT		0x043	/* Active Intr across all levels */
@@ -100,6 +106,13 @@ static inline long arch_local_save_flags(void)
 	:
 	: "memory");
 
+	/* To be compatible with irq_save()/irq_restore()
+	 * encode the irq bits as expected by CLRI/SETI
+	 * (this was needed to make CONFIG_TRACE_IRQFLAGS work)
+	 */
+	temp = (1 << 5) |
+		((!!(temp & STATUS_IE_MASK)) << CLRI_STATUS_IE_BIT) |
+		(temp & CLRI_STATUS_E_MASK);
 	return temp;
 }
 
@@ -108,7 +121,7 @@ static inline long arch_local_save_flags(void)
  */
 static inline int arch_irqs_disabled_flags(unsigned long flags)
 {
-	return !(flags & (STATUS_IE_MASK));
+	return !(flags & CLRI_STATUS_IE_MASK);
 }
 
 static inline int arch_irqs_disabled(void)
@@ -128,11 +141,32 @@ static inline void arc_softirq_clear(int irq)
 
 #else
 
+#ifdef CONFIG_TRACE_IRQFLAGS
+
+.macro TRACE_ASM_IRQ_DISABLE
+	bl	trace_hardirqs_off
+.endm
+
+.macro TRACE_ASM_IRQ_ENABLE
+	bl	trace_hardirqs_on
+.endm
+
+#else
+
+.macro TRACE_ASM_IRQ_DISABLE
+.endm
+
+.macro TRACE_ASM_IRQ_ENABLE
+.endm
+
+#endif
 .macro IRQ_DISABLE  scratch
 	clri
+	TRACE_ASM_IRQ_DISABLE
 .endm
 
 .macro IRQ_ENABLE  scratch
+	TRACE_ASM_IRQ_ENABLE
 	seti
 .endm
 

arch/arc/include/asm/mmzone.h

@@ -0,0 +1,43 @@
+/*
+ * Copyright (C) 2016 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _ASM_ARC_MMZONE_H
+#define _ASM_ARC_MMZONE_H
+
+#ifdef CONFIG_DISCONTIGMEM
+
+extern struct pglist_data node_data[];
+#define NODE_DATA(nid) (&node_data[nid])
+
+static inline int pfn_to_nid(unsigned long pfn)
+{
+	int is_end_low = 1;
+
+	if (IS_ENABLED(CONFIG_ARC_HAS_PAE40))
+		is_end_low = pfn <= virt_to_pfn(0xFFFFFFFFUL);
+
+	/*
+	 * node 0: lowmem:             0x8000_0000   to 0xFFFF_FFFF
+	 * node 1: HIGHMEM w/o  PAE40: 0x0           to 0x7FFF_FFFF
+	 *         HIGHMEM with PAE40: 0x1_0000_0000 to ...
+	 */
+	if (pfn >= ARCH_PFN_OFFSET && is_end_low)
+		return 0;
+
+	return 1;
+}
+
+static inline int pfn_valid(unsigned long pfn)
+{
+	int nid = pfn_to_nid(pfn);
+
+	return (pfn <= node_end_pfn(nid));
+}
+#endif /* CONFIG_DISCONTIGMEM  */
+
+#endif

arch/arc/include/asm/page.h

@@ -72,11 +72,20 @@ typedef unsigned long pgprot_t;
 
 typedef pte_t * pgtable_t;
 
+/*
+ * Use virt_to_pfn with caution:
+ * If used in pte or paddr related macros, it could cause truncation
+ * in PAE40 builds
+ * As a rule of thumb, only use it in helpers starting with virt_
+ * You have been warned !
+ */
 #define virt_to_pfn(kaddr)	(__pa(kaddr) >> PAGE_SHIFT)
 
 #define ARCH_PFN_OFFSET		virt_to_pfn(CONFIG_LINUX_LINK_BASE)
 
+#ifdef CONFIG_FLATMEM
 #define pfn_valid(pfn)		(((pfn) - ARCH_PFN_OFFSET) < max_mapnr)
+#endif
 
 /*
  * __pa, __va, virt_to_page (ALERT: deprecated, don't use them)
@@ -85,12 +94,10 @@ typedef pte_t * pgtable_t;
  * virt here means link-address/program-address as embedded in object code.
  * And for ARC, link-addr = physical address
  */
-#define __pa(vaddr)  ((unsigned long)vaddr)
+#define __pa(vaddr)  ((unsigned long)(vaddr))
 #define __va(paddr)  ((void *)((unsigned long)(paddr)))
 
-#define virt_to_page(kaddr)	\
-	(mem_map + virt_to_pfn((kaddr) - CONFIG_LINUX_LINK_BASE))
-
+#define virt_to_page(kaddr)	pfn_to_page(virt_to_pfn(kaddr))
 #define virt_addr_valid(kaddr)  pfn_valid(virt_to_pfn(kaddr))
 
 /* Default Permissions for stack/heaps pages (Non Executable) */

arch/arc/include/asm/pgtable.h

@@ -278,14 +278,13 @@ static inline void pmd_set(pmd_t *pmdp, pte_t *ptep)
 #define pmd_present(x)			(pmd_val(x))
 #define pmd_clear(xp)			do { pmd_val(*(xp)) = 0; } while (0)
 
-#define pte_page(pte)	\
-	(mem_map + virt_to_pfn(pte_val(pte) - CONFIG_LINUX_LINK_BASE))
-
+#define pte_page(pte)		pfn_to_page(pte_pfn(pte))
 #define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
-#define pte_pfn(pte)		virt_to_pfn(pte_val(pte))
-#define pfn_pte(pfn, prot)	(__pte(((pte_t)(pfn) << PAGE_SHIFT) | \
-				 pgprot_val(prot)))
-#define __pte_index(addr)	(virt_to_pfn(addr) & (PTRS_PER_PTE - 1))
+#define pfn_pte(pfn, prot)	(__pte(((pte_t)(pfn) << PAGE_SHIFT) | pgprot_val(prot)))
+
+/* Don't use virt_to_pfn for macros below: could cause truncations for PAE40*/
+#define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
+#define __pte_index(addr)	(((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
 
 /*
  * pte_offset gets a @ptr to PMD entry (PGD in our 2-tier paging system)

arch/arc/kernel/entry-arcv2.S

@@ -69,8 +69,11 @@ ENTRY(handle_interrupt)
 
 	clri		; To make status32.IE agree with CPU internal state
 
-	lr  r0, [ICAUSE]
+#ifdef CONFIG_TRACE_IRQFLAGS
+	TRACE_ASM_IRQ_DISABLE
+#endif
 
+	lr  r0, [ICAUSE]
 	mov   blink, ret_from_exception
 
 	b.d  arch_do_IRQ
@@ -169,6 +172,11 @@ END(EV_TLBProtV)
 
 .Lrestore_regs:
 
+	# Interrpts are actually disabled from this point on, but will get
+	# reenabled after we return from interrupt/exception.
+	# But irq tracer needs to be told now...
+	TRACE_ASM_IRQ_ENABLE
+
 	ld	r0, [sp, PT_status32]	; U/K mode at time of entry
 	lr	r10, [AUX_IRQ_ACT]
 

arch/arc/kernel/entry-compact.S

@@ -341,6 +341,9 @@ END(call_do_page_fault)
 
 .Lrestore_regs:
 
+	# Interrpts are actually disabled from this point on, but will get
+	# reenabled after we return from interrupt/exception.
+	# But irq tracer needs to be told now...
 	TRACE_ASM_IRQ_ENABLE
 
 	lr	r10, [status32]

arch/arc/mm/init.c

@@ -13,6 +13,7 @@
 #ifdef CONFIG_BLK_DEV_INITRD
 #include <linux/initrd.h>
 #endif
+#include <linux/of_fdt.h>
 #include <linux/swap.h>
 #include <linux/module.h>
 #include <linux/highmem.h>
@@ -29,11 +30,16 @@ static const unsigned long low_mem_start = CONFIG_LINUX_LINK_BASE;
 static unsigned long low_mem_sz;
 
 #ifdef CONFIG_HIGHMEM
-static unsigned long min_high_pfn;
+static unsigned long min_high_pfn, max_high_pfn;
 static u64 high_mem_start;
 static u64 high_mem_sz;
 #endif
 
+#ifdef CONFIG_DISCONTIGMEM
+struct pglist_data node_data[MAX_NUMNODES] __read_mostly;
+EXPORT_SYMBOL(node_data);
+#endif
+
 /* User can over-ride above with "mem=nnn[KkMm]" in cmdline */
 static int __init setup_mem_sz(char *str)
 {
@@ -108,13 +114,11 @@ void __init setup_arch_memory(void)
 	/* Last usable page of low mem */
 	max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz);
 
-#ifdef CONFIG_HIGHMEM
-	min_high_pfn = PFN_DOWN(high_mem_start);
-	max_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
+#ifdef CONFIG_FLATMEM
+	/* pfn_valid() uses this */
+	max_mapnr = max_low_pfn - min_low_pfn;
 #endif
 
-	max_mapnr = max_pfn - min_low_pfn;
-
 	/*------------- bootmem allocator setup -----------------------*/
 
 	/*
@@ -128,7 +132,7 @@ void __init setup_arch_memory(void)
 	 * the crash
 	 */
 
-	memblock_add(low_mem_start, low_mem_sz);
+	memblock_add_node(low_mem_start, low_mem_sz, 0);
 	memblock_reserve(low_mem_start, __pa(_end) - low_mem_start);
 
 #ifdef CONFIG_BLK_DEV_INITRD
@@ -136,6 +140,9 @@ void __init setup_arch_memory(void)
 		memblock_reserve(__pa(initrd_start), initrd_end - initrd_start);
 #endif
 
+	early_init_fdt_reserve_self();
+	early_init_fdt_scan_reserved_mem();
+
 	memblock_dump_all();
 
 	/*----------------- node/zones setup --------------------------*/
@@ -145,13 +152,6 @@ void __init setup_arch_memory(void)
 	zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn;
 	zones_holes[ZONE_NORMAL] = 0;
 
-#ifdef CONFIG_HIGHMEM
-	zones_size[ZONE_HIGHMEM] = max_pfn - max_low_pfn;
-
-	/* This handles the peripheral address space hole */
-	zones_holes[ZONE_HIGHMEM] = min_high_pfn - max_low_pfn;
-#endif
-
 	/*
 	 * We can't use the helper free_area_init(zones[]) because it uses
 	 * PAGE_OFFSET to compute the @min_low_pfn which would be wrong
@@ -164,6 +164,34 @@ void __init setup_arch_memory(void)
 			    zones_holes);	/* holes */
 
 #ifdef CONFIG_HIGHMEM
+	/*
+	 * Populate a new node with highmem
+	 *
+	 * On ARC (w/o PAE) HIGHMEM addresses are actually smaller (0 based)
+	 * than addresses in normal ala low memory (0x8000_0000 based).
+	 * Even with PAE, the huge peripheral space hole would waste a lot of
+	 * mem with single mem_map[]. This warrants a mem_map per region design.
+	 * Thus HIGHMEM on ARC is imlemented with DISCONTIGMEM.
+	 *
+	 * DISCONTIGMEM in turns requires multiple nodes. node 0 above is
+	 * populated with normal memory zone while node 1 only has highmem
+	 */
+	node_set_online(1);
+
+	min_high_pfn = PFN_DOWN(high_mem_start);
+	max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz);
+
+	zones_size[ZONE_NORMAL] = 0;
+	zones_holes[ZONE_NORMAL] = 0;
+
+	zones_size[ZONE_HIGHMEM] = max_high_pfn - min_high_pfn;
+	zones_holes[ZONE_HIGHMEM] = 0;
+
+	free_area_init_node(1,			/* node-id */
+			    zones_size,		/* num pages per zone */
+			    min_high_pfn,	/* first pfn of node */
+			    zones_holes);	/* holes */
+
 	high_memory = (void *)(min_high_pfn << PAGE_SHIFT);
 	kmap_init();
 #endif
@@ -181,7 +209,7 @@ void __init mem_init(void)
 	unsigned long tmp;
 
 	reset_all_zones_managed_pages();
-	for (tmp = min_high_pfn; tmp < max_pfn; tmp++)
+	for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++)
 		free_highmem_page(pfn_to_page(tmp));
 #endif
 

arch/arm/boot/dts/am33xx.dtsi

@@ -860,7 +860,7 @@
 			ti,no-idle-on-init;
 			reg = <0x50000000 0x2000>;
 			interrupts = <100>;
-			dmas = <&edma 52>;
+			dmas = <&edma 52 0>;
 			dma-names = "rxtx";
 			gpmc,num-cs = <7>;
 			gpmc,num-waitpins = <2>;

arch/arm/boot/dts/am4372.dtsi

@@ -884,7 +884,7 @@
 		gpmc: gpmc@50000000 {
 			compatible = "ti,am3352-gpmc";
 			ti,hwmods = "gpmc";
-			dmas = <&edma 52>;
+			dmas = <&edma 52 0>;
 			dma-names = "rxtx";
 			clocks = <&l3s_gclk>;
 			clock-names = "fck";

arch/arm/boot/dts/am57xx-beagle-x15.dts

@@ -99,13 +99,6 @@
 		#cooling-cells = <2>;
 	};
 
-	extcon_usb1: extcon_usb1 {
-		compatible = "linux,extcon-usb-gpio";
-		id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&extcon_usb1_pins>;
-	};
-
 	hdmi0: connector {
 		compatible = "hdmi-connector";
 		label = "hdmi";
@@ -349,12 +342,6 @@
 		>;
 	};
 
-	extcon_usb1_pins: extcon_usb1_pins {
-		pinctrl-single,pins = <
-			DRA7XX_CORE_IOPAD(0x37ec, PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
-		>;
-	};
-
 	tpd12s015_pins: pinmux_tpd12s015_pins {
 		pinctrl-single,pins = <
 			DRA7XX_CORE_IOPAD(0x37b0, PIN_OUTPUT | MUX_MODE14)		/* gpio7_10 CT_CP_HPD */
@@ -706,10 +693,6 @@
 	pinctrl-0 = <&usb1_pins>;
 };
 
-&omap_dwc3_1 {
-	extcon = <&extcon_usb1>;
-};
-
 &omap_dwc3_2 {
 	extcon = <&extcon_usb2>;
 };

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -106,7 +106,7 @@
 
 			pmc: pmc@fffffc00 {
 				compatible = "atmel,at91sam9x5-pmc", "syscon";
-				reg = <0xfffffc00 0x100>;
+				reg = <0xfffffc00 0x200>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				interrupt-controller;
 				#address-cells = <1>;

arch/arm/boot/dts/dm814x-clocks.dtsi

@@ -4,6 +4,157 @@
  * published by the Free Software Foundation.
  */
 
+&pllss {
+	/*
+	 * See TRM "2.6.10 Connected outputso DPLLS" and
+	 * "2.6.11 Connected Outputs of DPLLJ". Only clkout is
+	 * connected except for hdmi and usb.
+	 */
+	adpll_mpu_ck: adpll@40 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-s-clock";
+		reg = <0x40 0x40>;
+		clocks = <&devosc_ck &devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow", "clkinphif";
+		clock-output-names = "481c5040.adpll.dcoclkldo",
+				     "481c5040.adpll.clkout",
+				     "481c5040.adpll.clkoutx2",
+				     "481c5040.adpll.clkouthif";
+	};
+
+	adpll_dsp_ck: adpll@80 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x80 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5080.adpll.dcoclkldo",
+				     "481c5080.adpll.clkout",
+				     "481c5080.adpll.clkoutldo";
+	};
+
+	adpll_sgx_ck: adpll@b0 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0xb0 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c50b0.adpll.dcoclkldo",
+				     "481c50b0.adpll.clkout",
+				     "481c50b0.adpll.clkoutldo";
+	};
+
+	adpll_hdvic_ck: adpll@e0 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0xe0 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c50e0.adpll.dcoclkldo",
+				     "481c50e0.adpll.clkout",
+				     "481c50e0.adpll.clkoutldo";
+	};
+
+	adpll_l3_ck: adpll@110 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x110 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5110.adpll.dcoclkldo",
+				     "481c5110.adpll.clkout",
+				     "481c5110.adpll.clkoutldo";
+	};
+
+	adpll_isp_ck: adpll@140 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x140 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5140.adpll.dcoclkldo",
+				     "481c5140.adpll.clkout",
+				     "481c5140.adpll.clkoutldo";
+	};
+
+	adpll_dss_ck: adpll@170 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x170 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5170.adpll.dcoclkldo",
+				     "481c5170.adpll.clkout",
+				     "481c5170.adpll.clkoutldo";
+	};
+
+	adpll_video0_ck: adpll@1a0 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x1a0 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c51a0.adpll.dcoclkldo",
+				     "481c51a0.adpll.clkout",
+				     "481c51a0.adpll.clkoutldo";
+	};
+
+	adpll_video1_ck: adpll@1d0 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x1d0 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c51d0.adpll.dcoclkldo",
+				     "481c51d0.adpll.clkout",
+				     "481c51d0.adpll.clkoutldo";
+	};
+
+	adpll_hdmi_ck: adpll@200 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x200 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5200.adpll.dcoclkldo",
+				     "481c5200.adpll.clkout",
+				     "481c5200.adpll.clkoutldo";
+	};
+
+	adpll_audio_ck: adpll@230 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x230 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5230.adpll.dcoclkldo",
+				     "481c5230.adpll.clkout",
+				     "481c5230.adpll.clkoutldo";
+	};
+
+	adpll_usb_ck: adpll@260 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x260 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5260.adpll.dcoclkldo",
+				     "481c5260.adpll.clkout",
+				     "481c5260.adpll.clkoutldo";
+	};
+
+	adpll_ddr_ck: adpll@290 {
+		#clock-cells = <1>;
+		compatible = "ti,dm814-adpll-lj-clock";
+		reg = <0x290 0x30>;
+		clocks = <&devosc_ck &devosc_ck>;
+		clock-names = "clkinp", "clkinpulow";
+		clock-output-names = "481c5290.adpll.dcoclkldo",
+				     "481c5290.adpll.clkout",
+				     "481c5290.adpll.clkoutldo";
+	};
+};
+
 &pllss_clocks {
 	timer1_fck: timer1_fck {
 		#clock-cells = <0>;
@@ -23,6 +174,24 @@
 		reg = <0x2e0>;
 	};
 
+	/* CPTS_RFT_CLK in RMII_REFCLK_SRC, usually sourced from auiod */
+	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&adpll_video0_ck 1
+			  &adpll_video1_ck 1
+			  &adpll_audio_ck 1>;
+		ti,bit-shift = <1>;
+		reg = <0x2e8>;
+	};
+
+	/* REVISIT: Set up with a proper mux using RMII_REFCLK_SRC */
+	cpsw_125mhz_gclk: cpsw_125mhz_gclk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <125000000>;
+	};
+
 	sysclk18_ck: sysclk18_ck {
 		#clock-cells = <0>;
 		compatible = "ti,mux-clock";
@@ -79,37 +248,6 @@
 		compatible = "fixed-clock";
 		clock-frequency = <1000000000>;
 	};
-
-	sysclk4_ck: sysclk4_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <222000000>;
-	};
-
-	sysclk6_ck: sysclk6_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <100000000>;
-	};
-
-	sysclk10_ck: sysclk10_ck {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <48000000>;
-	};
-
-        cpsw_125mhz_gclk: cpsw_125mhz_gclk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <125000000>;
-	};
-
-	cpsw_cpts_rft_clk: cpsw_cpts_rft_clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <250000000>;
-	};
-
 };
 
 &prcm_clocks {
@@ -138,6 +276,49 @@
 		clock-div = <78125>;
 	};
 
+	/* L4_HS 220 MHz*/
+	sysclk4_ck: sysclk4_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&adpll_l3_ck 1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <1>;
+	};
+
+	/* L4_FWCFG */
+	sysclk5_ck: sysclk5_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&adpll_l3_ck 1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <2>;
+	};
+
+	/* L4_LS 110 MHz */
+	sysclk6_ck: sysclk6_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&adpll_l3_ck 1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <2>;
+	};
+
+	sysclk8_ck: sysclk8_ck {
+		#clock-cells = <0>;
+		compatible = "ti,fixed-factor-clock";
+		clocks = <&adpll_usb_ck 1>;
+		ti,clock-mult = <1>;
+		ti,clock-div = <1>;
+	};
+
+	sysclk10_ck: sysclk10_ck {
+		compatible = "ti,divider-clock";
+		reg = <0x324>;
+		ti,max-div = <7>;
+		#clock-cells = <0>;
+		clocks = <&adpll_usb_ck 1>;
+	};
+
 	aud_clkin0_ck: aud_clkin0_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";

arch/arm/boot/dts/dra62x-clocks.dtsi

@@ -6,6 +6,32 @@
 
 #include "dm814x-clocks.dtsi"
 
+/* Compared to dm814x, dra62x does not have hdic, l3 or dss PLLs */
+&adpll_hdvic_ck {
+	status = "disabled";
+};
+
+&adpll_l3_ck {
+	status = "disabled";
+};
+
+&adpll_dss_ck {
+	status = "disabled";
+};
+
+/* Compared to dm814x, dra62x has interconnect clocks on isp PLL */
+&sysclk4_ck {
+	clocks = <&adpll_isp_ck 1>;
+};
+
+&sysclk5_ck {
+	clocks = <&adpll_isp_ck 1>;
+};
+
+&sysclk6_ck {
+	clocks = <&adpll_isp_ck 1>;
+};
+
 /*
  * Compared to dm814x, dra62x has different shifts and more mux options.
  * Please add the extra options for ysclk_14 and 16 if really needed.

arch/arm/boot/dts/dra7xx-clocks.dtsi

@@ -98,12 +98,20 @@
 		clock-frequency = <32768>;
 	};
 
-	sys_32k_ck: sys_32k_ck {
+	sys_clk32_crystal_ck: sys_clk32_crystal_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
 		clock-frequency = <32768>;
 	};
 
+	sys_clk32_pseudo_ck: sys_clk32_pseudo_ck {
+		#clock-cells = <0>;
+		compatible = "fixed-factor-clock";
+		clocks = <&sys_clkin1>;
+		clock-mult = <1>;
+		clock-div = <610>;
+	};
+
 	virt_12000000_ck: virt_12000000_ck {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
@@ -2170,4 +2178,12 @@
 		ti,bit-shift = <22>;
 		reg = <0x0558>;
 	};
+
+	sys_32k_ck: sys_32k_ck {
+		#clock-cells = <0>;
+		compatible = "ti,mux-clock";
+		clocks = <&sys_clk32_crystal_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>, <&sys_clk32_pseudo_ck>;
+		ti,bit-shift = <8>;
+		reg = <0x6c4>;
+	};
 };

arch/arm/boot/dts/omap3-n900.dts

@@ -329,6 +329,7 @@
 	regulator-name = "V28";
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <2800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 	regulator-always-on; /* due to battery cover sensor */
 };
 
@@ -336,30 +337,35 @@
 	regulator-name = "VCSI";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 };
 
 &vaux3 {
 	regulator-name = "VMMC2_30";
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <3000000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 };
 
 &vaux4 {
 	regulator-name = "VCAM_ANA_28";
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <2800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 };
 
 &vmmc1 {
 	regulator-name = "VMMC1";
 	regulator-min-microvolt = <1850000>;
 	regulator-max-microvolt = <3150000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 };
 
 &vmmc2 {
 	regulator-name = "V28_A";
 	regulator-min-microvolt = <2800000>;
 	regulator-max-microvolt = <3000000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 	regulator-always-on; /* due VIO leak to AIC34 VDDs */
 };
 
@@ -367,6 +373,7 @@
 	regulator-name = "VPLL";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 	regulator-always-on;
 };
 
@@ -374,6 +381,7 @@
 	regulator-name = "VSDI_CSI";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 	regulator-always-on;
 };
 
@@ -381,6 +389,7 @@
 	regulator-name = "VMMC2_IO_18";
 	regulator-min-microvolt = <1800000>;
 	regulator-max-microvolt = <1800000>;
+	regulator-initial-mode = <0x0e>; /* RES_STATE_ACTIVE */
 };
 
 &vio {

arch/arm/boot/dts/omap34xx.dtsi

@@ -46,7 +46,7 @@
 			       0x480bd800 0x017c>;
 			interrupts = <24>;
 			iommus = <&mmu_isp>;
-			syscon = <&scm_conf 0xdc>;
+			syscon = <&scm_conf 0x6c>;
 			ti,phy-type = <OMAP3ISP_PHY_TYPE_COMPLEX_IO>;
 			#clock-cells = <1>;
 			ports {

arch/arm/boot/dts/omap5-board-common.dtsi

@@ -472,7 +472,7 @@
 				ldo1_reg: ldo1 {
 					/* VDDAPHY_CAM: vdda_csiport */
 					regulator-name = "ldo1";
-					regulator-min-microvolt = <1500000>;
+					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 				};
 
@@ -498,7 +498,7 @@
 				ldo4_reg: ldo4 {
 					/* VDDAPHY_DISP: vdda_dsiport/hdmi */
 					regulator-name = "ldo4";
-					regulator-min-microvolt = <1500000>;
+					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 				};
 

arch/arm/boot/dts/omap5-cm-t54.dts

@@ -513,7 +513,7 @@
 				ldo1_reg: ldo1 {
 					/* VDDAPHY_CAM: vdda_csiport */
 					regulator-name = "ldo1";
-					regulator-min-microvolt = <1500000>;
+					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 				};
 
@@ -537,7 +537,7 @@
 				ldo4_reg: ldo4 {
 					/* VDDAPHY_DISP: vdda_dsiport/hdmi */
 					regulator-name = "ldo4";
-					regulator-min-microvolt = <1500000>;
+					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
 				};
 

arch/arm/boot/dts/omap5.dtsi

@@ -269,7 +269,7 @@
 			omap5_pmx_wkup: pinmux@c840 {
 				compatible = "ti,omap5-padconf",
 					     "pinctrl-single";
-				reg = <0xc840 0x0038>;
+				reg = <0xc840 0x003c>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				#interrupt-cells = <1>;

arch/arm/boot/dts/qcom-apq8064.dtsi

@@ -666,7 +666,7 @@
 		};
 
 		sata0: sata@29000000 {
-			compatible		= "generic-ahci";
+			compatible		= "qcom,apq8064-ahci", "generic-ahci";
 			status			= "disabled";
 			reg			= <0x29000000 0x180>;
 			interrupts		= <GIC_SPI 209 IRQ_TYPE_NONE>;
@@ -688,6 +688,7 @@
 
 			phys			= <&sata_phy0>;
 			phy-names		= "sata-phy";
+			ports-implemented	= <0x1>;
 		};
 
 		/* Temporary fixed regulator */

arch/arm/boot/dts/qcom-msm8974.dtsi

@@ -1,6 +1,6 @@
 /dts-v1/;
 
-#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/clock/qcom,gcc-msm8974.h>
 #include "skeleton.dtsi"
 
@@ -460,8 +460,6 @@
 			clock-names = "core", "iface";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
-			dma-names = "tx", "rx";
 		};
 
 		spmi_bus: spmi@fc4cf000 {
@@ -479,16 +477,6 @@
 			interrupt-controller;
 			#interrupt-cells = <4>;
 		};
-
-		blsp2_dma: dma-controller@f9944000 {
-			compatible = "qcom,bam-v1.4.0";
-			reg = <0xf9944000 0x19000>;
-			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc GCC_BLSP2_AHB_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
 	};
 
 	smd {

arch/arm/boot/dts/r8a7791-koelsch.dts

@@ -661,6 +661,7 @@
 };
 
 &pcie_bus_clk {
+	clock-frequency = <100000000>;
 	status = "okay";
 };
 

arch/arm/boot/dts/r8a7791-porter.dts

@@ -143,19 +143,11 @@
 };
 
 &pfc {
-	pinctrl-0 = <&scif_clk_pins>;
-	pinctrl-names = "default";
-
 	scif0_pins: serial0 {
 		renesas,groups = "scif0_data_d";
 		renesas,function = "scif0";
 	};
 
-	scif_clk_pins: scif_clk {
-		renesas,groups = "scif_clk";
-		renesas,function = "scif_clk";
-	};
-
 	ether_pins: ether {
 		renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
 		renesas,function = "eth";
@@ -229,11 +221,6 @@
 	status = "okay";
 };
 
-&scif_clk {
-	clock-frequency = <14745600>;
-	status = "okay";
-};
-
 &ether {
 	pinctrl-0 = <&ether_pins &phy1_pins>;
 	pinctrl-names = "default";
@@ -414,6 +401,7 @@
 };
 
 &pcie_bus_clk {
+	clock-frequency = <100000000>;
 	status = "okay";
 };
 

arch/arm/boot/dts/r8a7791.dtsi

@@ -1083,9 +1083,8 @@
 		pcie_bus_clk: pcie_bus_clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency = <100000000>;
+			clock-frequency = <0>;
 			clock-output-names = "pcie_bus";
-			status = "disabled";
 		};
 
 		/* External SCIF clock */
@@ -1094,7 +1093,6 @@
 			#clock-cells = <0>;
 			/* This value must be overridden by the board. */
 			clock-frequency = <0>;
-			status = "disabled";
 		};
 
 		/* External USB clock - can be overridden by the board */
@@ -1112,7 +1110,6 @@
 			/* This value must be overridden by the board. */
 			clock-frequency = <0>;
 			clock-output-names = "can_clk";
-			status = "disabled";
 		};
 
 		/* Special CPG clocks */

arch/arm/boot/dts/sama5d2.dtsi

@@ -280,7 +280,7 @@
 			status = "disabled";
 
 			nfc@c0000000 {
-				compatible = "atmel,sama5d4-nfc";
+				compatible = "atmel,sama5d3-nfc";
 				#address-cells = <1>;
 				#size-cells = <1>;
 				reg = < /* NFC Command Registers */

arch/arm/boot/dts/sun8i-q8-common.dtsi

@@ -125,8 +125,6 @@
 };
 
 &reg_dc1sw {
-	regulator-min-microvolt = <3000000>;
-	regulator-max-microvolt = <3000000>;
 	regulator-name = "vcc-lcd";
 };
 

arch/arm/include/asm/cputype.h

@@ -276,7 +276,7 @@ static inline int __attribute_const__ cpuid_feature_extract_field(u32 features,
 	int feature = (features >> field) & 15;
 
 	/* feature registers are signed values */
-	if (feature > 8)
+	if (feature > 7)
 		feature -= 16;
 
 	return feature;

arch/arm/include/asm/domain.h

@@ -84,6 +84,7 @@
 
 #ifndef __ASSEMBLY__
 
+#ifdef CONFIG_CPU_CP15_MMU
 static inline unsigned int get_domain(void)
 {
 	unsigned int domain;
@@ -103,6 +104,16 @@ static inline void set_domain(unsigned val)
 	  : : "r" (val) : "memory");
 	isb();
 }
+#else
+static inline unsigned int get_domain(void)
+{
+	return 0;
+}
+
+static inline void set_domain(unsigned val)
+{
+}
+#endif
 
 #ifdef CONFIG_CPU_USE_DOMAINS
 #define modify_domain(dom,type)					\

arch/arm/kernel/head-nommu.S

@@ -236,7 +236,7 @@ ENTRY(__setup_mpu)
 	mov	r0, #CONFIG_VECTORS_BASE	@ Cover from VECTORS_BASE
 	ldr	r5,=(MPU_AP_PL1RW_PL0NA | MPU_RGN_NORMAL)
 	/* Writing N to bits 5:1 (RSR_SZ) --> region size 2^N+1 */
-	mov	r6, #(((PAGE_SHIFT - 1) << MPU_RSR_SZ) | 1 << MPU_RSR_EN)
+	mov	r6, #(((2 * PAGE_SHIFT - 1) << MPU_RSR_SZ) | 1 << MPU_RSR_EN)
 
 	setup_region r0, r5, r6, MPU_DATA_SIDE	@ VECTORS_BASE, PL0 NA, enabled
 	beq	3f				@ Memory-map not unified

arch/arm/kernel/setup.c

@@ -512,7 +512,7 @@ static void __init elf_hwcap_fixup(void)
 	 */
 	if (cpuid_feature_extract(CPUID_EXT_ISAR3, 12) > 1 ||
 	    (cpuid_feature_extract(CPUID_EXT_ISAR3, 12) == 1 &&
-	     cpuid_feature_extract(CPUID_EXT_ISAR3, 20) >= 3))
+	     cpuid_feature_extract(CPUID_EXT_ISAR4, 20) >= 3))
 		elf_hwcap &= ~HWCAP_SWP;
 }
 

arch/arm/kvm/mmu.c

@@ -1004,7 +1004,7 @@ static bool transparent_hugepage_adjust(kvm_pfn_t *pfnp, phys_addr_t *ipap)
 	kvm_pfn_t pfn = *pfnp;
 	gfn_t gfn = *ipap >> PAGE_SHIFT;
 
-	if (PageTransCompound(pfn_to_page(pfn))) {
+	if (PageTransCompoundMap(pfn_to_page(pfn))) {
 		unsigned long mask;
 		/*
 		 * The address we faulted on is backed by a transparent huge

arch/arm/mach-davinci/board-mityomapl138.c

@@ -121,6 +121,11 @@ static void read_factory_config(struct nvmem_device *nvmem, void *context)
 	const char *partnum = NULL;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
 
+	if (!IS_BUILTIN(CONFIG_NVMEM)) {
+		pr_warn("Factory Config not available without CONFIG_NVMEM\n");
+		goto bad_config;
+	}
+
 	ret = nvmem_device_read(nvmem, 0, sizeof(factory_config),
 				&factory_config);
 	if (ret != sizeof(struct factory_config)) {

arch/arm/mach-davinci/common.c

@@ -33,6 +33,11 @@ void davinci_get_mac_addr(struct nvmem_device *nvmem, void *context)
 	char *mac_addr = davinci_soc_info.emac_pdata->mac_addr;
 	off_t offset = (off_t)context;
 
+	if (!IS_BUILTIN(CONFIG_NVMEM)) {
+		pr_warn("Cannot read MAC addr from EEPROM without CONFIG_NVMEM\n");
+		return;
+	}
+
 	/* Read MAC addr from EEPROM */
 	if (nvmem_device_read(nvmem, offset, ETH_ALEN, mac_addr) == ETH_ALEN)
 		pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);

arch/arm/mach-exynos/pm_domains.c

@@ -92,7 +92,7 @@ static int exynos_pd_power(struct generic_pm_domain *domain, bool power_on)
 			if (IS_ERR(pd->clk[i]))
 				break;
 
-			if (IS_ERR(pd->clk[i]))
+			if (IS_ERR(pd->pclk[i]))
 				continue; /* Skip on first power up */
 			if (clk_set_parent(pd->clk[i], pd->pclk[i]))
 				pr_err("%s: error setting parent to clock%d\n",

arch/arm/mach-imx/devices/platform-sdhci-esdhc-imx.c

@@ -71,6 +71,7 @@ struct platform_device *__init imx_add_sdhci_esdhc_imx(
 	if (!pdata)
 		pdata = &default_esdhc_pdata;
 
-	return imx_add_platform_device(data->devid, data->id, res,
-			ARRAY_SIZE(res), pdata, sizeof(*pdata));
+	return imx_add_platform_device_dmamask(data->devid, data->id, res,
+			ARRAY_SIZE(res), pdata, sizeof(*pdata),
+			DMA_BIT_MASK(32));
 }

arch/arm/mach-omap2/clockdomains7xx_data.c

@@ -461,7 +461,7 @@ static struct clockdomain ipu_7xx_clkdm = {
 	.cm_inst	  = DRA7XX_CM_CORE_AON_IPU_INST,
 	.clkdm_offs	  = DRA7XX_CM_CORE_AON_IPU_IPU_CDOFFS,
 	.dep_bit	  = DRA7XX_IPU_STATDEP_SHIFT,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.flags		  = CLKDM_CAN_SWSUP,
 };
 
 static struct clockdomain mpu1_7xx_clkdm = {

arch/arm/mach-omap2/io.c

@@ -737,7 +737,8 @@ void __init omap5_init_late(void)
 #ifdef CONFIG_SOC_DRA7XX
 void __init dra7xx_init_early(void)
 {
-	omap2_set_globals_tap(-1, OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE));
+	omap2_set_globals_tap(DRA7XX_CLASS,
+			      OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE));
 	omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
 	omap2_control_base_init();
 	omap4_pm_init_early();

arch/arm/mach-omap2/omap-wakeupgen.c

@@ -274,6 +274,10 @@ static inline void omap5_irq_save_context(void)
  */
 static void irq_save_context(void)
 {
+	/* DRA7 has no SAR to save */
+	if (soc_is_dra7xx())
+		return;
+
 	if (!sar_base)
 		sar_base = omap4_get_sar_ram_base();
 
@@ -290,6 +294,9 @@ static void irq_sar_clear(void)
 {
 	u32 val;
 	u32 offset = SAR_BACKUP_STATUS_OFFSET;
+	/* DRA7 has no SAR to save */
+	if (soc_is_dra7xx())
+		return;
 
 	if (soc_is_omap54xx())
 		offset = OMAP5_SAR_BACKUP_STATUS_OFFSET;

arch/arm/mach-omap2/pm34xx.c

@@ -198,7 +198,6 @@ void omap_sram_idle(void)
 	int per_next_state = PWRDM_POWER_ON;
 	int core_next_state = PWRDM_POWER_ON;
 	int per_going_off;
-	int core_prev_state;
 	u32 sdrc_pwr = 0;
 
 	mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
@@ -278,16 +277,20 @@ void omap_sram_idle(void)
 		sdrc_write_reg(sdrc_pwr, SDRC_POWER);
 
 	/* CORE */
-	if (core_next_state < PWRDM_POWER_ON) {
-		core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm);
-		if (core_prev_state == PWRDM_POWER_OFF) {
-			omap3_core_restore_context();
-			omap3_cm_restore_context();
-			omap3_sram_restore_context();
-			omap2_sms_restore_context();
-		}
+	if (core_next_state < PWRDM_POWER_ON &&
+	    pwrdm_read_prev_pwrst(core_pwrdm) == PWRDM_POWER_OFF) {
+		omap3_core_restore_context();
+		omap3_cm_restore_context();
+		omap3_sram_restore_context();
+		omap2_sms_restore_context();
+	} else {
+		/*
+		 * In off-mode resume path above, omap3_core_restore_context
+		 * also handles the INTC autoidle restore done here so limit
+		 * this to non-off mode resume paths so we don't do it twice.
+		 */
+		omap3_intc_resume_idle();
 	}
-	omap3_intc_resume_idle();
 
 	pwrdm_post_transition(NULL);
 

arch/arm/mach-shmobile/timer.c

@@ -40,8 +40,7 @@ static void __init shmobile_setup_delay_hz(unsigned int max_cpu_core_hz,
 void __init shmobile_init_delay(void)
 {
 	struct device_node *np, *cpus;
-	bool is_a7_a8_a9 = false;
-	bool is_a15 = false;
+	unsigned int div = 0;
 	bool has_arch_timer = false;
 	u32 max_freq = 0;
 
@@ -55,27 +54,22 @@ void __init shmobile_init_delay(void)
 		if (!of_property_read_u32(np, "clock-frequency", &freq))
 			max_freq = max(max_freq, freq);
 
-		if (of_device_is_compatible(np, "arm,cortex-a8") ||
-		    of_device_is_compatible(np, "arm,cortex-a9")) {
-			is_a7_a8_a9 = true;
-		} else if (of_device_is_compatible(np, "arm,cortex-a7")) {
-			is_a7_a8_a9 = true;
-			has_arch_timer = true;
-		} else if (of_device_is_compatible(np, "arm,cortex-a15")) {
-			is_a15 = true;
+		if (of_device_is_compatible(np, "arm,cortex-a8")) {
+			div = 2;
+		} else if (of_device_is_compatible(np, "arm,cortex-a9")) {
+			div = 1;
+		} else if (of_device_is_compatible(np, "arm,cortex-a7") ||
+			 of_device_is_compatible(np, "arm,cortex-a15")) {
+			div = 1;
 			has_arch_timer = true;
 		}
 	}
 
 	of_node_put(cpus);
 
-	if (!max_freq)
+	if (!max_freq || !div)
 		return;
 
-	if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) {
-		if (is_a7_a8_a9)
-			shmobile_setup_delay_hz(max_freq, 1, 3);
-		else if (is_a15)
-			shmobile_setup_delay_hz(max_freq, 2, 4);
-	}
+	if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
+		shmobile_setup_delay_hz(max_freq, 1, div);
 }

arch/arm/mach-socfpga/headsmp.S

@@ -13,6 +13,7 @@
 #include <asm/assembler.h>
 
 	.arch	armv7-a
+	.arm
 
 ENTRY(secondary_trampoline)
 	/* CPU1 will always fetch from 0x0 when it is brought out of reset.

arch/arm/mm/dma-mapping.c

@@ -762,7 +762,8 @@ static void *__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle,
 	if (!mask)
 		return NULL;
 
-	buf = kzalloc(sizeof(*buf), gfp);
+	buf = kzalloc(sizeof(*buf),
+		      gfp & ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM));
 	if (!buf)
 		return NULL;
 

arch/arm/mm/nommu.c

@@ -87,7 +87,6 @@ static unsigned long irbar_read(void)
 /* MPU initialisation functions */
 void __init sanity_check_meminfo_mpu(void)
 {
-	int i;
 	phys_addr_t phys_offset = PHYS_OFFSET;
 	phys_addr_t aligned_region_size, specified_mem_size, rounded_mem_size;
 	struct memblock_region *reg;
@@ -110,11 +109,13 @@ void __init sanity_check_meminfo_mpu(void)
 		} else {
 			/*
 			 * memblock auto merges contiguous blocks, remove
-			 * all blocks afterwards
+			 * all blocks afterwards in one go (we can't remove
+			 * blocks separately while iterating)
 			 */
 			pr_notice("Ignoring RAM after %pa, memory at %pa ignored\n",
-				  &mem_start, &reg->base);
-			memblock_remove(reg->base, reg->size);
+				  &mem_end, &reg->base);
+			memblock_remove(reg->base, 0 - reg->base);
+			break;
 		}
 	}
 
@@ -144,7 +145,7 @@ void __init sanity_check_meminfo_mpu(void)
 		pr_warn("Truncating memory from %pa to %pa (MPU region constraints)",
 				&specified_mem_size, &aligned_region_size);
 		memblock_remove(mem_start + aligned_region_size,
-				specified_mem_size - aligned_round_size);
+				specified_mem_size - aligned_region_size);
 
 		mem_end = mem_start + aligned_region_size;
 	}
@@ -261,7 +262,7 @@ void __init mpu_setup(void)
 		return;
 
 	region_err = mpu_setup_region(MPU_RAM_REGION, PHYS_OFFSET,
-					ilog2(meminfo.bank[0].size),
+					ilog2(memblock.memory.regions[0].size),
 					MPU_AP_PL1RW_PL0RW | MPU_RGN_NORMAL);
 	if (region_err) {
 		panic("MPU region initialization failure! %d", region_err);
@@ -285,7 +286,7 @@ void __init arm_mm_memblock_reserve(void)
 	 * some architectures which the DRAM is the exception vector to trap,
 	 * alloc_page breaks with error, although it is not NULL, but "0."
 	 */
-	memblock_reserve(CONFIG_VECTORS_BASE, PAGE_SIZE);
+	memblock_reserve(CONFIG_VECTORS_BASE, 2 * PAGE_SIZE);
 #else /* ifndef CONFIG_CPU_V7M */
 	/*
 	 * There is no dedicated vector page on V7-M. So nothing needs to be

arch/arm64/Kconfig.platforms

@@ -2,6 +2,7 @@ menu "Platform selection"
 
 config ARCH_SUNXI
 	bool "Allwinner sunxi 64-bit SoC Family"
+	select GENERIC_IRQ_CHIP
 	help
 	  This enables support for Allwinner sunxi based SoCs like the A64.
 

arch/arm64/boot/dts/renesas/r8a7795.dtsi

@@ -120,7 +120,6 @@
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 		clock-frequency = <0>;
-		status = "disabled";
 	};
 
 	soc {

arch/arm64/boot/dts/socionext/uniphier-ph1-ld20-ref.dts

@@ -70,7 +70,6 @@
 		i2c3 = &i2c3;
 		i2c4 = &i2c4;
 		i2c5 = &i2c5;
-		i2c6 = &i2c6;
 	};
 };
 

arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi

@@ -201,15 +201,12 @@
 
 		i2c2: i2c@58782000 {
 			compatible = "socionext,uniphier-fi2c";
-			status = "disabled";
 			reg = <0x58782000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 43 4>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&pinctrl_i2c2>;
 			clocks = <&i2c_clk>;
-			clock-frequency = <100000>;
+			clock-frequency = <400000>;
 		};
 
 		i2c3: i2c@58783000 {
@@ -227,12 +224,15 @@
 
 		i2c4: i2c@58784000 {
 			compatible = "socionext,uniphier-fi2c";
+			status = "disabled";
 			reg = <0x58784000 0x80>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <0 45 4>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_i2c4>;
 			clocks = <&i2c_clk>;
-			clock-frequency = <400000>;
+			clock-frequency = <100000>;
 		};
 
 		i2c5: i2c@58785000 {
@@ -245,16 +245,6 @@
 			clock-frequency = <400000>;
 		};
 
-		i2c6: i2c@58786000 {
-			compatible = "socionext,uniphier-fi2c";
-			reg = <0x58786000 0x80>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-			interrupts = <0 26 4>;
-			clocks = <&i2c_clk>;
-			clock-frequency = <400000>;
-		};
-
 		system_bus: system-bus@58c00000 {
 			compatible = "socionext,uniphier-system-bus";
 			status = "disabled";

arch/arm64/kernel/head.S

@@ -588,6 +588,15 @@ set_hcr:
 	msr	vpidr_el2, x0
 	msr	vmpidr_el2, x1
 
+	/*
+	 * When VHE is not in use, early init of EL2 and EL1 needs to be
+	 * done here.
+	 * When VHE _is_ in use, EL1 will not be used in the host and
+	 * requires no configuration, and all non-hyp-specific EL2 setup
+	 * will be done via the _EL1 system register aliases in __cpu_setup.
+	 */
+	cbnz	x2, 1f
+
 	/* sctlr_el1 */
 	mov	x0, #0x0800			// Set/clear RES{1,0} bits
 CPU_BE(	movk	x0, #0x33d0, lsl #16	)	// Set EE and E0E on BE systems
@@ -597,6 +606,7 @@ CPU_LE(	movk	x0, #0x30d0, lsl #16	)	// Clear EE and E0E on LE systems
 	/* Coprocessor traps. */
 	mov	x0, #0x33ff
 	msr	cptr_el2, x0			// Disable copro. traps to EL2
+1:
 
 #ifdef CONFIG_COMPAT
 	msr	hstr_el2, xzr			// Disable CP15 traps to EL2
@@ -734,7 +744,8 @@ ENDPROC(__secondary_switched)
 
 	.macro	update_early_cpu_boot_status status, tmp1, tmp2
 	mov	\tmp2, #\status
-	str_l	\tmp2, __early_cpu_boot_status, \tmp1
+	adr_l	\tmp1, __early_cpu_boot_status
+	str	\tmp2, [\tmp1]
 	dmb	sy
 	dc	ivac, \tmp1			// Invalidate potentially stale cache line
 	.endm

arch/arm64/kernel/smp_spin_table.c

@@ -52,6 +52,7 @@ static void write_pen_release(u64 val)
 static int smp_spin_table_cpu_init(unsigned int cpu)
 {
 	struct device_node *dn;
+	int ret;
 
 	dn = of_get_cpu_node(cpu, NULL);
 	if (!dn)
@@ -60,15 +61,15 @@ static int smp_spin_table_cpu_init(unsigned int cpu)
 	/*
 	 * Determine the address from which the CPU is polling.
 	 */
-	if (of_property_read_u64(dn, "cpu-release-addr",
-				 &cpu_release_addr[cpu])) {
+	ret = of_property_read_u64(dn, "cpu-release-addr",
+				   &cpu_release_addr[cpu]);
+	if (ret)
 		pr_err("CPU %d: missing or invalid cpu-release-addr property\n",
 		       cpu);
 
-		return -1;
-	}
+	of_node_put(dn);
 
-	return 0;
+	return ret;
 }
 
 static int smp_spin_table_cpu_prepare(unsigned int cpu)

arch/arm64/net/bpf_jit_comp.c

@@ -476,6 +476,7 @@ emit_cond_jmp:
 		case BPF_JGE:
 			jmp_cond = A64_COND_CS;
 			break;
+		case BPF_JSET:
 		case BPF_JNE:
 			jmp_cond = A64_COND_NE;
 			break;

arch/nios2/lib/memset.c

@@ -68,7 +68,7 @@ void *memset(void *s, int c, size_t count)
 		  "=r" (charcnt),	/* %1  Output */
 		  "=r" (dwordcnt),	/* %2  Output */
 		  "=r" (fill8reg),	/* %3  Output */
-		  "=r" (wrkrega)	/* %4  Output */
+		  "=&r" (wrkrega)	/* %4  Output only */
 		: "r" (c),		/* %5  Input */
 		  "0" (s),		/* %0  Input/Output */
 		  "1" (count)		/* %1  Input/Output */

arch/parisc/kernel/syscall.S

@@ -344,7 +344,7 @@ tracesys_next:
 #endif
 
 	cmpib,COND(=),n -1,%r20,tracesys_exit /* seccomp may have returned -1 */
-	comiclr,>>=	__NR_Linux_syscalls, %r20, %r0
+	comiclr,>>	__NR_Linux_syscalls, %r20, %r0
 	b,n	.Ltracesys_nosys
 
 	LDREGX  %r20(%r19), %r19

arch/powerpc/include/asm/systbl.h

@@ -384,3 +384,5 @@ SYSCALL(ni_syscall)
 SYSCALL(ni_syscall)
 SYSCALL(mlock2)
 SYSCALL(copy_file_range)
+COMPAT_SYS_SPU(preadv2)
+COMPAT_SYS_SPU(pwritev2)

arch/powerpc/include/asm/unistd.h

@@ -12,7 +12,7 @@
 #include <uapi/asm/unistd.h>
 
 
-#define NR_syscalls		380
+#define NR_syscalls		382
 
 #define __NR__exit __NR_exit
 

arch/powerpc/include/asm/word-at-a-time.h

@@ -82,7 +82,7 @@ static inline unsigned long create_zero_mask(unsigned long bits)
 	    "andc	%1,%1,%2\n\t"
 	    "popcntd	%0,%1"
 		: "=r" (leading_zero_bits), "=&r" (trailing_zero_bit_mask)
-		: "r" (bits));
+		: "b" (bits));
 
 	return leading_zero_bits;
 }

arch/powerpc/include/uapi/asm/cputable.h

@@ -31,6 +31,7 @@
 #define PPC_FEATURE_PSERIES_PERFMON_COMPAT \
 					0x00000040
 
+/* Reserved - do not use		0x00000004 */
 #define PPC_FEATURE_TRUE_LE		0x00000002
 #define PPC_FEATURE_PPC_LE		0x00000001
 

arch/powerpc/include/uapi/asm/unistd.h

@@ -390,5 +390,7 @@
 #define __NR_membarrier		365
 #define __NR_mlock2		378
 #define __NR_copy_file_range	379
+#define __NR_preadv2		380
+#define __NR_pwritev2		381
 
 #endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */

arch/powerpc/kernel/prom.c

@@ -148,23 +148,25 @@ static struct ibm_pa_feature {
 	unsigned long	cpu_features;	/* CPU_FTR_xxx bit */
 	unsigned long	mmu_features;	/* MMU_FTR_xxx bit */
 	unsigned int	cpu_user_ftrs;	/* PPC_FEATURE_xxx bit */
+	unsigned int	cpu_user_ftrs2;	/* PPC_FEATURE2_xxx bit */
 	unsigned char	pabyte;		/* byte number in ibm,pa-features */
 	unsigned char	pabit;		/* bit number (big-endian) */
 	unsigned char	invert;		/* if 1, pa bit set => clear feature */
 } ibm_pa_features[] __initdata = {
-	{0, 0, PPC_FEATURE_HAS_MMU,	0, 0, 0},
-	{0, 0, PPC_FEATURE_HAS_FPU,	0, 1, 0},
-	{CPU_FTR_CTRL, 0, 0,		0, 3, 0},
-	{CPU_FTR_NOEXECUTE, 0, 0,	0, 6, 0},
-	{CPU_FTR_NODSISRALIGN, 0, 0,	1, 1, 1},
-	{0, MMU_FTR_CI_LARGE_PAGE, 0,	1, 2, 0},
-	{CPU_FTR_REAL_LE, PPC_FEATURE_TRUE_LE, 5, 0, 0},
+	{0, 0, PPC_FEATURE_HAS_MMU, 0,		0, 0, 0},
+	{0, 0, PPC_FEATURE_HAS_FPU, 0,		0, 1, 0},
+	{CPU_FTR_CTRL, 0, 0, 0,			0, 3, 0},
+	{CPU_FTR_NOEXECUTE, 0, 0, 0,		0, 6, 0},
+	{CPU_FTR_NODSISRALIGN, 0, 0, 0,		1, 1, 1},
+	{0, MMU_FTR_CI_LARGE_PAGE, 0, 0,		1, 2, 0},
+	{CPU_FTR_REAL_LE, 0, PPC_FEATURE_TRUE_LE, 0, 5, 0, 0},
 	/*
-	 * If the kernel doesn't support TM (ie. CONFIG_PPC_TRANSACTIONAL_MEM=n),
-	 * we don't want to turn on CPU_FTR_TM here, so we use CPU_FTR_TM_COMP
-	 * which is 0 if the kernel doesn't support TM.
+	 * If the kernel doesn't support TM (ie CONFIG_PPC_TRANSACTIONAL_MEM=n),
+	 * we don't want to turn on TM here, so we use the *_COMP versions
+	 * which are 0 if the kernel doesn't support TM.
 	 */
-	{CPU_FTR_TM_COMP, 0, 0,		22, 0, 0},
+	{CPU_FTR_TM_COMP, 0, 0,
+	 PPC_FEATURE2_HTM_COMP|PPC_FEATURE2_HTM_NOSC_COMP, 22, 0, 0},
 };
 
 static void __init scan_features(unsigned long node, const unsigned char *ftrs,
@@ -195,10 +197,12 @@ static void __init scan_features(unsigned long node, const unsigned char *ftrs,
 		if (bit ^ fp->invert) {
 			cur_cpu_spec->cpu_features |= fp->cpu_features;
 			cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs;
+			cur_cpu_spec->cpu_user_features2 |= fp->cpu_user_ftrs2;
 			cur_cpu_spec->mmu_features |= fp->mmu_features;
 		} else {
 			cur_cpu_spec->cpu_features &= ~fp->cpu_features;
 			cur_cpu_spec->cpu_user_features &= ~fp->cpu_user_ftrs;
+			cur_cpu_spec->cpu_user_features2 &= ~fp->cpu_user_ftrs2;
 			cur_cpu_spec->mmu_features &= ~fp->mmu_features;
 		}
 	}

arch/s390/Kconfig

@@ -4,6 +4,9 @@ config MMU
 config ZONE_DMA
 	def_bool y
 
+config CPU_BIG_ENDIAN
+	def_bool y
+
 config LOCKDEP_SUPPORT
 	def_bool y
 

arch/s390/include/asm/mmu.h

@@ -11,7 +11,7 @@ typedef struct {
 	spinlock_t list_lock;
 	struct list_head pgtable_list;
 	struct list_head gmap_list;
-	unsigned long asce_bits;
+	unsigned long asce;
 	unsigned long asce_limit;
 	unsigned long vdso_base;
 	/* The mmu context allocates 4K page tables. */

arch/s390/include/asm/mmu_context.h

@@ -26,12 +26,28 @@ static inline int init_new_context(struct task_struct *tsk,
 	mm->context.has_pgste = 0;
 	mm->context.use_skey = 0;
 #endif
-	if (mm->context.asce_limit == 0) {
+	switch (mm->context.asce_limit) {
+	case 1UL << 42:
+		/*
+		 * forked 3-level task, fall through to set new asce with new
+		 * mm->pgd
+		 */
+	case 0:
 		/* context created by exec, set asce limit to 4TB */
-		mm->context.asce_bits = _ASCE_TABLE_LENGTH |
-			_ASCE_USER_BITS | _ASCE_TYPE_REGION3;
 		mm->context.asce_limit = STACK_TOP_MAX;
-	} else if (mm->context.asce_limit == (1UL << 31)) {
+		mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
+				   _ASCE_USER_BITS | _ASCE_TYPE_REGION3;
+		break;
+	case 1UL << 53:
+		/* forked 4-level task, set new asce with new mm->pgd */
+		mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
+				   _ASCE_USER_BITS | _ASCE_TYPE_REGION2;
+		break;
+	case 1UL << 31:
+		/* forked 2-level compat task, set new asce with new mm->pgd */
+		mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
+				   _ASCE_USER_BITS | _ASCE_TYPE_SEGMENT;
+		/* pgd_alloc() did not increase mm->nr_pmds */
 		mm_inc_nr_pmds(mm);
 	}
 	crst_table_init((unsigned long *) mm->pgd, pgd_entry_type(mm));
@@ -42,7 +58,7 @@ static inline int init_new_context(struct task_struct *tsk,
 
 static inline void set_user_asce(struct mm_struct *mm)
 {
-	S390_lowcore.user_asce = mm->context.asce_bits | __pa(mm->pgd);
+	S390_lowcore.user_asce = mm->context.asce;
 	if (current->thread.mm_segment.ar4)
 		__ctl_load(S390_lowcore.user_asce, 7, 7);
 	set_cpu_flag(CIF_ASCE);
@@ -71,7 +87,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 {
 	int cpu = smp_processor_id();
 
-	S390_lowcore.user_asce = next->context.asce_bits | __pa(next->pgd);
+	S390_lowcore.user_asce = next->context.asce;
 	if (prev == next)
 		return;
 	if (MACHINE_HAS_TLB_LC)

arch/s390/include/asm/pci.h

@@ -44,7 +44,8 @@ struct zpci_fmb {
 	u64 rpcit_ops;
 	u64 dma_rbytes;
 	u64 dma_wbytes;
-} __packed __aligned(64);
+	u64 pad[2];
+} __packed __aligned(128);
 
 enum zpci_state {
 	ZPCI_FN_STATE_RESERVED,

arch/s390/include/asm/pgalloc.h

@@ -52,8 +52,8 @@ static inline unsigned long pgd_entry_type(struct mm_struct *mm)
 	return _REGION2_ENTRY_EMPTY;
 }
 
-int crst_table_upgrade(struct mm_struct *, unsigned long limit);
-void crst_table_downgrade(struct mm_struct *, unsigned long limit);
+int crst_table_upgrade(struct mm_struct *);
+void crst_table_downgrade(struct mm_struct *);
 
 static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long address)
 {

arch/s390/include/asm/processor.h

@@ -175,7 +175,7 @@ extern __vector128 init_task_fpu_regs[__NUM_VXRS];
 	regs->psw.mask	= PSW_USER_BITS | PSW_MASK_BA;			\
 	regs->psw.addr	= new_psw;					\
 	regs->gprs[15]	= new_stackp;					\
-	crst_table_downgrade(current->mm, 1UL << 31);			\
+	crst_table_downgrade(current->mm);				\
 	execve_tail();							\
 } while (0)
 

arch/s390/include/asm/seccomp.h

@@ -13,4 +13,6 @@
 #define __NR_seccomp_exit_32	__NR_exit
 #define __NR_seccomp_sigreturn_32 __NR_sigreturn
 
+#include <asm-generic/seccomp.h>
+
 #endif	/* _ASM_S390_SECCOMP_H */

arch/s390/include/asm/tlbflush.h

@@ -110,8 +110,7 @@ static inline void __tlb_flush_asce(struct mm_struct *mm, unsigned long asce)
 static inline void __tlb_flush_kernel(void)
 {
 	if (MACHINE_HAS_IDTE)
-		__tlb_flush_idte((unsigned long) init_mm.pgd |
-				 init_mm.context.asce_bits);
+		__tlb_flush_idte(init_mm.context.asce);
 	else
 		__tlb_flush_global();
 }
@@ -133,8 +132,7 @@ static inline void __tlb_flush_asce(struct mm_struct *mm, unsigned long asce)
 static inline void __tlb_flush_kernel(void)
 {
 	if (MACHINE_HAS_TLB_LC)
-		__tlb_flush_idte_local((unsigned long) init_mm.pgd |
-				       init_mm.context.asce_bits);
+		__tlb_flush_idte_local(init_mm.context.asce);
 	else
 		__tlb_flush_local();
 }
@@ -148,8 +146,7 @@ static inline void __tlb_flush_mm(struct mm_struct * mm)
 	 * only ran on the local cpu.
 	 */
 	if (MACHINE_HAS_IDTE && list_empty(&mm->context.gmap_list))
-		__tlb_flush_asce(mm, (unsigned long) mm->pgd |
-				 mm->context.asce_bits);
+		__tlb_flush_asce(mm, mm->context.asce);
 	else
 		__tlb_flush_full(mm);
 }

arch/s390/lib/spinlock.c

@@ -105,6 +105,7 @@ void arch_spin_lock_wait_flags(arch_spinlock_t *lp, unsigned long flags)
 			if (_raw_compare_and_swap(&lp->lock, 0, cpu))
 				return;
 			local_irq_restore(flags);
+			continue;
 		}
 		/* Check if the lock owner is running. */
 		if (first_diag && cpu_is_preempted(~owner)) {

arch/s390/mm/init.c

@@ -89,7 +89,8 @@ void __init paging_init(void)
 		asce_bits = _ASCE_TYPE_REGION3 | _ASCE_TABLE_LENGTH;
 		pgd_type = _REGION3_ENTRY_EMPTY;
 	}
-	S390_lowcore.kernel_asce = (__pa(init_mm.pgd) & PAGE_MASK) | asce_bits;
+	init_mm.context.asce = (__pa(init_mm.pgd) & PAGE_MASK) | asce_bits;
+	S390_lowcore.kernel_asce = init_mm.context.asce;
 	clear_table((unsigned long *) init_mm.pgd, pgd_type,
 		    sizeof(unsigned long)*2048);
 	vmem_map_init();

arch/s390/mm/mmap.c

@@ -174,7 +174,7 @@ int s390_mmap_check(unsigned long addr, unsigned long len, unsigned long flags)
 	if (!(flags & MAP_FIXED))
 		addr = 0;
 	if ((addr + len) >= TASK_SIZE)
-		return crst_table_upgrade(current->mm, TASK_MAX_SIZE);
+		return crst_table_upgrade(current->mm);
 	return 0;
 }
 
@@ -191,7 +191,7 @@ s390_get_unmapped_area(struct file *filp, unsigned long addr,
 		return area;
 	if (area == -ENOMEM && !is_compat_task() && TASK_SIZE < TASK_MAX_SIZE) {
 		/* Upgrade the page table to 4 levels and retry. */
-		rc = crst_table_upgrade(mm, TASK_MAX_SIZE);
+		rc = crst_table_upgrade(mm);
 		if (rc)
 			return (unsigned long) rc;
 		area = arch_get_unmapped_area(filp, addr, len, pgoff, flags);
@@ -213,7 +213,7 @@ s390_get_unmapped_area_topdown(struct file *filp, const unsigned long addr,
 		return area;
 	if (area == -ENOMEM && !is_compat_task() && TASK_SIZE < TASK_MAX_SIZE) {
 		/* Upgrade the page table to 4 levels and retry. */
-		rc = crst_table_upgrade(mm, TASK_MAX_SIZE);
+		rc = crst_table_upgrade(mm);
 		if (rc)
 			return (unsigned long) rc;
 		area = arch_get_unmapped_area_topdown(filp, addr, len,

arch/s390/mm/pgalloc.c

@@ -76,81 +76,52 @@ static void __crst_table_upgrade(void *arg)
 	__tlb_flush_local();
 }
 
-int crst_table_upgrade(struct mm_struct *mm, unsigned long limit)
+int crst_table_upgrade(struct mm_struct *mm)
 {
 	unsigned long *table, *pgd;
-	unsigned long entry;
-	int flush;
 
-	BUG_ON(limit > TASK_MAX_SIZE);
-	flush = 0;
-repeat:
+	/* upgrade should only happen from 3 to 4 levels */
+	BUG_ON(mm->context.asce_limit != (1UL << 42));
+
 	table = crst_table_alloc(mm);
 	if (!table)
 		return -ENOMEM;
+
 	spin_lock_bh(&mm->page_table_lock);
-	if (mm->context.asce_limit < limit) {
-		pgd = (unsigned long *) mm->pgd;
-		if (mm->context.asce_limit <= (1UL << 31)) {
-			entry = _REGION3_ENTRY_EMPTY;
-			mm->context.asce_limit = 1UL << 42;
-			mm->context.asce_bits = _ASCE_TABLE_LENGTH |
-						_ASCE_USER_BITS |
-						_ASCE_TYPE_REGION3;
-		} else {
-			entry = _REGION2_ENTRY_EMPTY;
-			mm->context.asce_limit = 1UL << 53;
-			mm->context.asce_bits = _ASCE_TABLE_LENGTH |
-						_ASCE_USER_BITS |
-						_ASCE_TYPE_REGION2;
-		}
-		crst_table_init(table, entry);
-		pgd_populate(mm, (pgd_t *) table, (pud_t *) pgd);
-		mm->pgd = (pgd_t *) table;
-		mm->task_size = mm->context.asce_limit;
-		table = NULL;
-		flush = 1;
-	}
+	pgd = (unsigned long *) mm->pgd;
+	crst_table_init(table, _REGION2_ENTRY_EMPTY);
+	pgd_populate(mm, (pgd_t *) table, (pud_t *) pgd);
+	mm->pgd = (pgd_t *) table;
+	mm->context.asce_limit = 1UL << 53;
+	mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
+			   _ASCE_USER_BITS | _ASCE_TYPE_REGION2;
+	mm->task_size = mm->context.asce_limit;
 	spin_unlock_bh(&mm->page_table_lock);
-	if (table)
-		crst_table_free(mm, table);
-	if (mm->context.asce_limit < limit)
-		goto repeat;
-	if (flush)
-		on_each_cpu(__crst_table_upgrade, mm, 0);
+
+	on_each_cpu(__crst_table_upgrade, mm, 0);
 	return 0;
 }
 
-void crst_table_downgrade(struct mm_struct *mm, unsigned long limit)
+void crst_table_downgrade(struct mm_struct *mm)
 {
 	pgd_t *pgd;
 
+	/* downgrade should only happen from 3 to 2 levels (compat only) */
+	BUG_ON(mm->context.asce_limit != (1UL << 42));
+
 	if (current->active_mm == mm) {
 		clear_user_asce();
 		__tlb_flush_mm(mm);
 	}
-	while (mm->context.asce_limit > limit) {
-		pgd = mm->pgd;
-		switch (pgd_val(*pgd) & _REGION_ENTRY_TYPE_MASK) {
-		case _REGION_ENTRY_TYPE_R2:
-			mm->context.asce_limit = 1UL << 42;
-			mm->context.asce_bits = _ASCE_TABLE_LENGTH |
-						_ASCE_USER_BITS |
-						_ASCE_TYPE_REGION3;
-			break;
-		case _REGION_ENTRY_TYPE_R3:
-			mm->context.asce_limit = 1UL << 31;
-			mm->context.asce_bits = _ASCE_TABLE_LENGTH |
-						_ASCE_USER_BITS |
-						_ASCE_TYPE_SEGMENT;
-			break;
-		default:
-			BUG();
-		}
-		mm->pgd = (pgd_t *) (pgd_val(*pgd) & _REGION_ENTRY_ORIGIN);
-		mm->task_size = mm->context.asce_limit;
-		crst_table_free(mm, (unsigned long *) pgd);
-	}
+
+	pgd = mm->pgd;
+	mm->pgd = (pgd_t *) (pgd_val(*pgd) & _REGION_ENTRY_ORIGIN);
+	mm->context.asce_limit = 1UL << 31;
+	mm->context.asce = __pa(mm->pgd) | _ASCE_TABLE_LENGTH |
+			   _ASCE_USER_BITS | _ASCE_TYPE_SEGMENT;
+	mm->task_size = mm->context.asce_limit;
+	crst_table_free(mm, (unsigned long *) pgd);
+
 	if (current->active_mm == mm)
 		set_user_asce(mm);
 }

arch/s390/pci/pci_dma.c

@@ -457,7 +457,7 @@ int zpci_dma_init_device(struct zpci_dev *zdev)
 	zdev->dma_table = dma_alloc_cpu_table();
 	if (!zdev->dma_table) {
 		rc = -ENOMEM;
-		goto out_clean;
+		goto out;
 	}
 
 	/*
@@ -477,18 +477,22 @@ int zpci_dma_init_device(struct zpci_dev *zdev)
 	zdev->iommu_bitmap = vzalloc(zdev->iommu_pages / 8);
 	if (!zdev->iommu_bitmap) {
 		rc = -ENOMEM;
-		goto out_reg;
+		goto free_dma_table;
 	}
 
 	rc = zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
 				(u64) zdev->dma_table);
 	if (rc)
-		goto out_reg;
-	return 0;
+		goto free_bitmap;
 
-out_reg:
+	return 0;
+free_bitmap:
+	vfree(zdev->iommu_bitmap);
+	zdev->iommu_bitmap = NULL;
+free_dma_table:
 	dma_free_cpu_table(zdev->dma_table);
-out_clean:
+	zdev->dma_table = NULL;
+out:
 	return rc;
 }
 

arch/sparc/configs/sparc32_defconfig

@@ -24,7 +24,6 @@ CONFIG_INET_AH=y
 CONFIG_INET_ESP=y
 CONFIG_INET_IPCOMP=y
 # CONFIG_INET_LRO is not set
-CONFIG_IPV6_PRIVACY=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m

arch/sparc/configs/sparc64_defconfig

@@ -48,7 +48,6 @@ CONFIG_SYN_COOKIES=y
 CONFIG_INET_AH=y
 CONFIG_INET_ESP=y
 CONFIG_INET_IPCOMP=y
-CONFIG_IPV6_PRIVACY=y
 CONFIG_IPV6_ROUTER_PREF=y
 CONFIG_IPV6_ROUTE_INFO=y
 CONFIG_IPV6_OPTIMISTIC_DAD=y

arch/sparc/include/asm/spitfire.h

@@ -48,6 +48,7 @@
 #define SUN4V_CHIP_SPARC_M6	0x06
 #define SUN4V_CHIP_SPARC_M7	0x07
 #define SUN4V_CHIP_SPARC64X	0x8a
+#define SUN4V_CHIP_SPARC_SN	0x8b
 #define SUN4V_CHIP_UNKNOWN	0xff
 
 #ifndef __ASSEMBLY__