Pull drm fixes from Dave Airlie:
"Last one for this round hopefully, mostly the usual suspects,
xe/amdgpu, with some single fixes otherwise.
There is one amdgpu HDMI blackscreen bug that came in late in the
cycle, but it was bisected and the revert is in here.
i915:
- Reject async flips when PSR's selective fetch is enabled
xe:
- Fix resource leak in xe_guc_ct_init_noalloc()'s error path
- Fix stack_depot usage without STACKDEPOT_ALWAYS_INIT
- Fix overflow in conversion from clock tics to msec
amdgpu:
- Unified MES fix
- HDMI fix
- Cursor fix
- Bightness fix
- EDID reading improvement
- UserQ fix
- Cyan Skillfish IP discovery fix
bridge:
- sil902x: Fix HDMI detection
imagination:
- Update documentation
sti:
- Fix leaks in probe
vga_switcheroo:
- Avoid race condition during fbcon initialization"
* tag 'drm-fixes-2025-11-28' of https://gitlab.freedesktop.org/drm/kernel:
drm/amdgpu: fix cyan_skillfish2 gpu info fw handling
drm/amdgpu: attach tlb fence to the PTs update
drm/amd/display: Increase EDID read retries
drm/amd/display: Don't change brightness for disabled connectors
drm/amd/display: Check NULL before accessing
Revert "drm/amd/display: Move setup_stream_attribute"
drm/xe: Fix conversion from clock ticks to milliseconds
drm/xe/guc: Fix stack_depot usage
drm/xe/guc: Fix resource leak in xe_guc_ct_init_noalloc()
drm/i915/psr: Reject async flips when selective fetch is enabled
drm, fbcon, vga_switcheroo: Avoid race condition in fbcon setup
drm/amd/amdgpu: reserve vm invalidation engine for uni_mes
drm: sti: fix device leaks at component probe
drm/imagination: Document pvr_device.power member
drm/bridge: sii902x: Fix HDMI detection with DRM_BRIDGE_ATTACH_NO_CONNECTOR
Pull dma-mapping fixes from Marek Szyprowski:
"Two last minute fixes for the recently modified DMA API infrastructure:
- proper handling of DMA_ATTR_MMIO in dma_iova_unlink() function (me)
- regression fix for the code refactoring related to P2PDMA (Pranjal
Shrivastava)"
* tag 'dma-mapping-6.18-2025-11-27' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-direct: Fix missing sg_dma_len assignment in P2PDMA bus mappings
iommu/dma: add missing support for DMA_ATTR_MMIO for dma_iova_unlink()
Pull ACPI fix from Rafael Wysocki:
"One more urgent ACPI support fix for 6.18
There is one more commit that needs to be reverted after reverting
problematic commit 7a8c994cbb ("ACPI: processor: idle: Optimize ACPI
idle driver registration"), so revert it"
* tag 'acpi-6.18-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI: processor: Update cpuidle driver check in __acpi_processor_start()"
Prior to commit a25e7962db ("PCI/P2PDMA: Refactor the p2pdma mapping
helpers"), P2P segments were mapped using the pci_p2pdma_map_segment()
helper. This helper was responsible for populating sg->dma_address,
marking the bus address, and also setting sg_dma_len(sg).
The refactor[1] removed this helper and moved the mapping logic directly
into the callers. While iommu_dma_map_sg() was correctly updated to set
the length in the new flow, it was missed in dma_direct_map_sg().
Thus, in dma_direct_map_sg(), the PCI_P2PDMA_MAP_BUS_ADDR case sets the
dma_address and marks the segment, but immediately executes 'continue',
which causes the loop to skip the standard assignment logic at the end:
sg_dma_len(sg) = sg->length;
As a result, when CONFIG_NEED_SG_DMA_LENGTH is enabled, the dma_length
field remains uninitialized (zero) for P2P bus address mappings. This
breaks upper-layer drivers (for e.g. RDMA/IB) that rely on sg_dma_len()
to determine the transfer size.
Fix this by explicitly setting the DMA length in the
PCI_P2PDMA_MAP_BUS_ADDR case before continuing to the next scatterlist
entry.
Fixes: a25e7962db ("PCI/P2PDMA: Refactor the p2pdma mapping helpers")
Reported-by: Jacob Moroni <jmoroni@google.com>
Signed-off-by: Pranjal Shrivastava <praan@google.com>
[1]
https://lore.kernel.org/all/ac14a0e94355bf898de65d023ccf8a2ad22a3ece.1746424934.git.leon@kernel.org/
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Shivaji Kant <shivajikant@google.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20251126114112.3694469-1-praan@google.com
xe_guc_ct_init_noalloc() allocates the CT workqueue and other helpers
before it tries to initialize ct->lock. If drmm_mutex_init() fails
we currently bail out without releasing those resources because the
guc_ct_fini() hasn’t been registered yet.
Since destroy_workqueue() in guc_ct_fini() may flush the workqueue, which
in turn can take the ct lock, the initialization sequence is restructured
to first initialize the ct->lock, then set up all CT state, and finally
register guc_ct_fini().
v2: guc_ct_fini() does take ct lock. (Matt)
v3: move primelockdep() together with drmm_mutex_init(). (Lucas)
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patch.msgid.link/20251110184522.1581001-2-shuicheng.lin@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 2e4ad5b0667244f496783c58de0995b9562d3344)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The selective fetch code doesn't handle asycn flips correctly.
There is a nonsense check for async flips in
intel_psr2_sel_fetch_config_valid() but that only gets called
for modesets/fastsets and thus does nothing for async flips.
Currently intel_async_flip_check_hw() is very unhappy as the
selective fetch code pulls in planes that are not even async
flips capable.
Reject async flips when selective fetch is enabled, until
someone fixes this properly (ie. disable selective fetch while
async flips are being issued).
Cc: stable@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20251105171015.22234-1-ville.syrjala@linux.intel.com
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
(cherry picked from commit a5f0cc8e0cd4007370af6985cb152001310cf20c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Protect vga_switcheroo_client_fb_set() with console lock. Avoids OOB
access in fbcon_remap_all(). Without holding the console lock the call
races with switching outputs.
VGA switcheroo calls fbcon_remap_all() when switching clients. The fbcon
function uses struct fb_info.node, which is set by register_framebuffer().
As the fb-helper code currently sets up VGA switcheroo before registering
the framebuffer, the value of node is -1 and therefore not a legal value.
For example, fbcon uses the value within set_con2fb_map() [1] as an index
into an array.
Moving vga_switcheroo_client_fb_set() after register_framebuffer() can
result in VGA switching that does not switch fbcon correctly.
Therefore move vga_switcheroo_client_fb_set() under fbcon_fb_registered(),
which already holds the console lock. Fbdev calls fbcon_fb_registered()
from within register_framebuffer(). Serializes the helper with VGA
switcheroo's call to fbcon_remap_all().
Although vga_switcheroo_client_fb_set() takes an instance of struct fb_info
as parameter, it really only needs the contained fbcon state. Moving the
call to fbcon initialization is therefore cleaner than before. Only amdgpu,
i915, nouveau and radeon support vga_switcheroo. For all other drivers,
this change does nothing.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://elixir.bootlin.com/linux/v6.17/source/drivers/video/fbdev/core/fbcon.c#L2942 # [1]
Fixes: 6a9ee8af34 ("vga_switcheroo: initial implementation (v15)")
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Cc: <stable@vger.kernel.org> # v2.6.34+
Link: https://patch.msgid.link/20251105161549.98836-1-tzimmermann@suse.de
The sii902x driver was caching HDMI detection state in a sink_is_hdmi field
and checking it in mode_set() to determine whether to set HDMI or DVI
output mode. This approach had two problems:
1. With DRM_BRIDGE_ATTACH_NO_CONNECTOR (used by modern display drivers like
TIDSS), the bridge's get_modes() is never called. Instead, the
drm_bridge_connector helper calls the bridge's edid_read() and updates the
connector itself. This meant sink_is_hdmi was never populated, causing the
driver to default to DVI mode and breaking HDMI audio.
2. The mode_set() callback doesn't receive atomic state or connector
pointer, making it impossible to check connector->display_info.is_hdmi
directly at that point.
Fix this by moving the HDMI vs DVI decision from mode_set() to
atomic_enable(), where we can access the connector via
drm_atomic_get_new_connector_for_encoder(). This works for both connector
models:
- With DRM_BRIDGE_ATTACH_NO_CONNECTOR: Returns the drm_bridge_connector
created by the display driver, which has already been updated by the
helper's call to drm_edid_connector_update()
- Without DRM_BRIDGE_ATTACH_NO_CONNECTOR (legacy): Returns the connector
embedded in sii902x struct, which gets updated by the bridge's own
get_modes()
Fixes: 3de47e1309 ("drm/bridge: sii902x: use display info is_hdmi")
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20251030151635.3019864-1-devarsht@ti.com
2025-11-21 15:59:21 +01:00
23 changed files with 90 additions and 68 deletions
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
