Pull mm updates from Andrew Morton:
"The usual shower of singleton fixes and minor series all over MM,
documented (hopefully adequately) in the respective changelogs.
Notable series include:
- Lucas Stach has provided some page-mapping cleanup/consolidation/
maintainability work in the series "mm/treewide: Remove pXd_huge()
API".
- In the series "Allow migrate on protnone reference with
MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
one test.
- In their series "Memory allocation profiling" Kent Overstreet and
Suren Baghdasaryan have contributed a means of determining (via
/proc/allocinfo) whereabouts in the kernel memory is being
allocated: number of calls and amount of memory.
- Matthew Wilcox has provided the series "Various significant MM
patches" which does a number of rather unrelated things, but in
largely similar code sites.
- In his series "mm: page_alloc: freelist migratetype hygiene"
Johannes Weiner has fixed the page allocator's handling of
migratetype requests, with resulting improvements in compaction
efficiency.
- In the series "make the hugetlb migration strategy consistent"
Baolin Wang has fixed a hugetlb migration issue, which should
improve hugetlb allocation reliability.
- Liu Shixin has hit an I/O meltdown caused by readahead in a
memory-tight memcg. Addressed in the series "Fix I/O high when
memory almost met memcg limit".
- In the series "mm/filemap: optimize folio adding and splitting"
Kairui Song has optimized pagecache insertion, yielding ~10%
performance improvement in one test.
- Baoquan He has cleaned up and consolidated the early zone
initialization code in the series "mm/mm_init.c: refactor
free_area_init_core()".
- Baoquan has also redone some MM initializatio code in the series
"mm/init: minor clean up and improvement".
- MM helper cleanups from Christoph Hellwig in his series "remove
follow_pfn".
- More cleanups from Matthew Wilcox in the series "Various
page->flags cleanups".
- Vlastimil Babka has contributed maintainability improvements in the
series "memcg_kmem hooks refactoring".
- More folio conversions and cleanups in Matthew Wilcox's series:
"Convert huge_zero_page to huge_zero_folio"
"khugepaged folio conversions"
"Remove page_idle and page_young wrappers"
"Use folio APIs in procfs"
"Clean up __folio_put()"
"Some cleanups for memory-failure"
"Remove page_mapping()"
"More folio compat code removal"
- David Hildenbrand chipped in with "fs/proc/task_mmu: convert
hugetlb functions to work on folis".
- Code consolidation and cleanup work related to GUP's handling of
hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".
- Rick Edgecombe has developed some fixes to stack guard gaps in the
series "Cover a guard gap corner case".
- Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
series "mm/ksm: fix ksm exec support for prctl".
- Baolin Wang has implemented NUMA balancing for multi-size THPs.
This is a simple first-cut implementation for now. The series is
"support multi-size THP numa balancing".
- Cleanups to vma handling helper functions from Matthew Wilcox in
the series "Unify vma_address and vma_pgoff_address".
- Some selftests maintenance work from Dev Jain in the series
"selftests/mm: mremap_test: Optimizations and style fixes".
- Improvements to the swapping of multi-size THPs from Ryan Roberts
in the series "Swap-out mTHP without splitting".
- Kefeng Wang has significantly optimized the handling of arm64's
permission page faults in the series
"arch/mm/fault: accelerate pagefault when badaccess"
"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"
- GUP cleanups from David Hildenbrand in "mm/gup: consistently call
it GUP-fast".
- hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
path to use struct vm_fault".
- selftests build fixes from John Hubbard in the series "Fix
selftests/mm build without requiring "make headers"".
- Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
series "Improved Memory Tier Creation for CPUless NUMA Nodes".
Fixes the initialization code so that migration between different
memory types works as intended.
- David Hildenbrand has improved follow_pte() and fixed an errant
driver in the series "mm: follow_pte() improvements and acrn
follow_pte() fixes".
- David also did some cleanup work on large folio mapcounts in his
series "mm: mapcount for large folios + page_mapcount() cleanups".
- Folio conversions in KSM in Alex Shi's series "transfer page to
folio in KSM".
- Barry Song has added some sysfs stats for monitoring multi-size
THP's in the series "mm: add per-order mTHP alloc and swpout
counters".
- Some zswap cleanups from Yosry Ahmed in the series "zswap
same-filled and limit checking cleanups".
- Matthew Wilcox has been looking at buffer_head code and found the
documentation to be lacking. The series is "Improve buffer head
documentation".
- Multi-size THPs get more work, this time from Lance Yang. His
series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
optimizes the freeing of these things.
- Kemeng Shi has added more userspace-visible writeback
instrumentation in the series "Improve visibility of writeback".
- Kemeng Shi then sent some maintenance work on top in the series
"Fix and cleanups to page-writeback".
- Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
the series "Improve anon_vma scalability for anon VMAs". Intel's
test bot reported an improbable 3x improvement in one test.
- SeongJae Park adds some DAMON feature work in the series
"mm/damon: add a DAMOS filter type for page granularity access recheck"
"selftests/damon: add DAMOS quota goal test"
- Also some maintenance work in the series
"mm/damon/paddr: simplify page level access re-check for pageout"
"mm/damon: misc fixes and improvements"
- David Hildenbrand has disabled some known-to-fail selftests ni the
series "selftests: mm: cow: flag vmsplice() hugetlb tests as
XFAIL".
- memcg metadata storage optimizations from Shakeel Butt in "memcg:
reduce memory consumption by memcg stats".
- DAX fixes and maintenance work from Vishal Verma in the series
"dax/bus.c: Fixups for dax-bus locking""
* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
selftests: cgroup: add tests to verify the zswap writeback path
mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
mm/damon/core: fix return value from damos_wmark_metric_value
mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
selftests: cgroup: remove redundant enabling of memory controller
Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
Docs/mm/damon/design: use a list for supported filters
Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
selftests/damon: classify tests for functionalities and regressions
selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
selftests/damon: add a test for DAMOS quota goal
...
Pull powerpc updates from Michael Ellerman:
- Enable BPF Kernel Functions (kfuncs) in the powerpc BPF JIT.
- Allow per-process DEXCR (Dynamic Execution Control Register) settings
via prctl, notably NPHIE which controls hashst/hashchk for ROP
protection.
- Install powerpc selftests in sub-directories. Note this changes the
way run_kselftest.sh needs to be invoked for powerpc selftests.
- Change fadump (Firmware Assisted Dump) to better handle memory
add/remove.
- Add support for passing additional parameters to the fadump kernel.
- Add support for updating the kdump image on CPU/memory add/remove
events.
- Other small features, cleanups and fixes.
Thanks to Andrew Donnellan, Andy Shevchenko, Aneesh Kumar K.V, Arnd
Bergmann, Benjamin Gray, Bjorn Helgaas, Christian Zigotzky, Christophe
Jaillet, Christophe Leroy, Colin Ian King, Cédric Le Goater, Dr. David
Alan Gilbert, Erhard Furtner, Frank Li, GUO Zihua, Ganesh Goudar, Geoff
Levand, Ghanshyam Agrawal, Greg Kurz, Hari Bathini, Joel Stanley, Justin
Stitt, Kunwu Chan, Li Yang, Lidong Zhong, Madhavan Srinivasan, Mahesh
Salgaonkar, Masahiro Yamada, Matthias Schiffer, Naresh Kamboju, Nathan
Chancellor, Nathan Lynch, Naveen N Rao, Nicholas Miehlbradt, Ran Wang,
Randy Dunlap, Ritesh Harjani, Sachin Sant, Shirisha Ganta, Shrikanth
Hegde, Sourabh Jain, Stephen Rothwell, sundar, Thorsten Blum, Vaibhav
Jain, Xiaowei Bao, Yang Li, and Zhao Chenhui.
* tag 'powerpc-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (85 commits)
powerpc/fadump: Fix section mismatch warning
powerpc/85xx: fix compile error without CONFIG_CRASH_DUMP
powerpc/fadump: update documentation about bootargs_append
powerpc/fadump: pass additional parameters when fadump is active
powerpc/fadump: setup additional parameters for dump capture kernel
powerpc/pseries/fadump: add support for multiple boot memory regions
selftests/powerpc/dexcr: Fix spelling mistake "predicition" -> "prediction"
KVM: PPC: Book3S HV nestedv2: Fix an error handling path in gs_msg_ops_kvmhv_nestedv2_config_fill_info()
KVM: PPC: Fix documentation for ppc mmu caps
KVM: PPC: code cleanup for kvmppc_book3s_irqprio_deliver
KVM: PPC: Book3S HV nestedv2: Cancel pending DEC exception
powerpc/xmon: Check cpu id in commands "c#", "dp#" and "dx#"
powerpc/code-patching: Use dedicated memory routines for patching
powerpc/code-patching: Test patch_instructions() during boot
powerpc64/kasan: Pass virtual addresses to kasan_init_phys_region()
powerpc: rename SPRN_HID2 define to SPRN_HID2_750FX
powerpc: Fix typos
powerpc/eeh: Fix spelling of the word "auxillary" and update comment
macintosh/ams: Fix unused variable warning
powerpc/Makefile: Remove bits related to the previous use of -mcmodel=large
...
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-05-13
We've added 119 non-merge commits during the last 14 day(s) which contain
a total of 134 files changed, 9462 insertions(+), 4742 deletions(-).
The main changes are:
1) Add BPF JIT support for 32-bit ARCv2 processors, from Shahab Vahedi.
2) Add BPF range computation improvements to the verifier in particular
around XOR and OR operators, refactoring of checks for range computation
and relaxing MUL range computation so that src_reg can also be an unknown
scalar, from Cupertino Miranda.
3) Add support to attach kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function entry
and return, the entry program can decide if the return program gets
executed and the entry program can share u64 cookie value with return
program. Session mode is a common use-case for tetragon and bpftrace,
from Jiri Olsa.
4) Fix a potential overflow in libbpf's ring__consume_n() and improve libbpf
as well as BPF selftest's struct_ops handling, from Andrii Nakryiko.
5) Improvements to BPF selftests in context of BPF gcc backend,
from Jose E. Marchesi & David Faust.
6) Migrate remaining BPF selftest tests from test_sock_addr.c to prog_test-
-style in order to retire the old test, run it in BPF CI and additionally
expand test coverage, from Jordan Rife.
7) Big batch for BPF selftest refactoring in order to remove duplicate code
around common network helpers, from Geliang Tang.
8) Another batch of improvements to BPF selftests to retire obsolete
bpf_tcp_helpers.h as everything is available vmlinux.h,
from Martin KaFai Lau.
9) Fix BPF map tear-down to not walk the map twice on free when both timer
and wq is used, from Benjamin Tissoires.
10) Fix BPF verifier assumptions about socket->sk that it can be non-NULL,
from Alexei Starovoitov.
11) Change BTF build scripts to using --btf_features for pahole v1.26+,
from Alan Maguire.
12) Small improvements to BPF reusing struct_size() and krealloc_array(),
from Andy Shevchenko.
13) Fix s390 JIT to emit a barrier for BPF_FETCH instructions,
from Ilya Leoshkevich.
14) Extend TCP ->cong_control() callback in order to feed in ack and
flag parameters and allow write-access to tp->snd_cwnd_stamp
from BPF program, from Miao Xu.
15) Add support for internal-only per-CPU instructions to inline
bpf_get_smp_processor_id() helper call for arm64 and riscv64 BPF JITs,
from Puranjay Mohan.
16) Follow-up to remove the redundant ethtool.h from tooling infrastructure,
from Tushar Vyavahare.
17) Extend libbpf to support "module:<function>" syntax for tracing
programs, from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits)
bpf: make list_for_each_entry portable
bpf: ignore expected GCC warning in test_global_func10.c
bpf: disable strict aliasing in test_global_func9.c
selftests/bpf: Free strdup memory in xdp_hw_metadata
selftests/bpf: Fix a few tests for GCC related warnings.
bpf: avoid gcc overflow warning in test_xdp_vlan.c
tools: remove redundant ethtool.h from tooling infra
selftests/bpf: Expand ATTACH_REJECT tests
selftests/bpf: Expand getsockname and getpeername tests
sefltests/bpf: Expand sockaddr hook deny tests
selftests/bpf: Expand sockaddr program return value tests
selftests/bpf: Retire test_sock_addr.(c|sh)
selftests/bpf: Remove redundant sendmsg test cases
selftests/bpf: Migrate ATTACH_REJECT test cases
selftests/bpf: Migrate expected_attach_type tests
selftests/bpf: Migrate wildcard destination rewrite test
selftests/bpf: Migrate sendmsg6 v4 mapped address tests
selftests/bpf: Migrate sendmsg deny test cases
selftests/bpf: Migrate WILDCARD_IP test
selftests/bpf: Handle SYSCALL_EPERM and SYSCALL_ENOTSUPP test cases
...
====================
Link: https://lore.kernel.org/r/20240513134114.17575-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adding support to attach bpf program for entry and return probe
of the same function. This is common use case which at the moment
requires to create two kprobe multi links.
Adding new BPF_TRACE_KPROBE_SESSION attach type that instructs
kernel to attach single link program to both entry and exit probe.
It's possible to control execution of the bpf program on return
probe simply by returning zero or non zero from the entry bpf
program execution to execute or not the bpf program on return
probe respectively.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240430112830.1184228-2-jolsa@kernel.org
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-04-29
We've added 147 non-merge commits during the last 32 day(s) which contain
a total of 158 files changed, 9400 insertions(+), 2213 deletions(-).
The main changes are:
1) Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86 BPF JIT. This allows
inlining per-CPU array and hashmap lookups
and the bpf_get_smp_processor_id() helper, from Andrii Nakryiko.
2) Add BPF link support for sk_msg and sk_skb programs, from Yonghong Song.
3) Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction,
from Alexei Starovoitov.
4) Add support for passing mark with bpf_fib_lookup helper,
from Anton Protopopov.
5) Add a new bpf_wq API for deferring events and refactor sleepable
bpf_timer code to keep common code where possible,
from Benjamin Tissoires.
6) Fix BPF_PROG_TEST_RUN infra with regards to bpf_dummy_struct_ops programs
to check when NULL is passed for non-NULLable parameters,
from Eduard Zingerman.
7) Harden the BPF verifier's and/or/xor value tracking,
from Harishankar Vishwanathan.
8) Introduce crypto kfuncs to make BPF programs able to utilize the kernel
crypto subsystem, from Vadim Fedorenko.
9) Various improvements to the BPF instruction set standardization doc,
from Dave Thaler.
10) Extend libbpf APIs to partially consume items from the BPF ringbuffer,
from Andrea Righi.
11) Bigger batch of BPF selftests refactoring to use common network helpers
and to drop duplicate code, from Geliang Tang.
12) Support bpf_tail_call_static() helper for BPF programs with GCC 13,
from Jose E. Marchesi.
13) Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled,
from Kumar Kartikeya Dwivedi.
14) Allow invoking BPF kfuncs from BPF_PROG_TYPE_SYSCALL programs,
from David Vernet.
15) Extend the BPF verifier to allow different input maps for a given
bpf_for_each_map_elem() helper call in a BPF program, from Philo Lu.
16) Add support for PROBE_MEM32 and bpf_addr_space_cast instructions
for riscv64 and arm64 JITs to enable BPF Arena, from Puranjay Mohan.
17) Shut up a false-positive KMSAN splat in interpreter mode by unpoison
the stack memory, from Martin KaFai Lau.
18) Improve xsk selftest coverage with new tests on maximum and minimum
hardware ring size configurations, from Tushar Vyavahare.
19) Various ReST man pages fixes as well as documentation and bash completion
improvements for bpftool, from Rameez Rehman & Quentin Monnet.
20) Fix libbpf with regards to dumping subsequent char arrays,
from Quentin Deslandes.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (147 commits)
bpf, docs: Clarify PC use in instruction-set.rst
bpf_helpers.h: Define bpf_tail_call_static when building with GCC
bpf, docs: Add introduction for use in the ISA Internet Draft
selftests/bpf: extend BPF_SOCK_OPS_RTT_CB test for srtt and mrtt_us
bpf: add mrtt and srtt as BPF_SOCK_OPS_RTT_CB args
selftests/bpf: dummy_st_ops should reject 0 for non-nullable params
bpf: check bpf_dummy_struct_ops program params for test runs
selftests/bpf: do not pass NULL for non-nullable params in dummy_st_ops
selftests/bpf: adjust dummy_st_ops_success to detect additional error
bpf: mark bpf_dummy_struct_ops.test_1 parameter as nullable
selftests/bpf: Add ring_buffer__consume_n test.
bpf: Add bpf_guard_preempt() convenience macro
selftests: bpf: crypto: add benchmark for crypto functions
selftests: bpf: crypto skcipher algo selftests
bpf: crypto: add skcipher to bpf crypto
bpf: make common crypto API for TC/XDP programs
bpf: update the comment for BTF_FIELDS_MAX
selftests/bpf: Fix wq test.
selftests/bpf: Use make_sockaddr in test_sock_addr
selftests/bpf: Use connect_to_addr in test_sock_addr
...
====================
Link: https://lore.kernel.org/r/20240429131657.19423-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Two important arguments in RTT estimation, mrtt and srtt, are passed to
tcp_bpf_rtt(), so that bpf programs get more information about RTT
computation in BPF_SOCK_OPS_RTT_CB.
The difference between bpf_sock_ops->srtt_us and the srtt here is: the
former is an old rtt before update, while srtt passed by tcp_bpf_rtt()
is that after update.
Signed-off-by: Philo Lu <lulie@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240425161724.73707-2-lulie@linux.alibaba.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
To pick up the changes from:
6bda055d62 ("KVM: define __KVM_HAVE_GUEST_DEBUG unconditionally")
5d9cb71642 ("KVM: arm64: move ARM-specific defines to uapi/asm/kvm.h")
71cd774ad2 ("KVM: s390: move s390-specific structs to uapi/asm/kvm.h")
d750951c9e ("KVM: powerpc: move powerpc-specific structs to uapi/asm/kvm.h")
bcac047727 ("KVM: x86: move x86-specific structs to uapi/asm/kvm.h")
c0a411904e ("KVM: remove more traces of device assignment UAPI")
f3c80061c0 ("KVM: SEV: fix compat ABI for KVM_MEMORY_ENCRYPT_OP")
That should be used to beautify the KVM arguments and it addresses these
tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
diff -u tools/arch/powerpc/include/uapi/asm/kvm.h arch/powerpc/include/uapi/asm/kvm.h
diff -u tools/arch/s390/include/uapi/asm/kvm.h arch/s390/include/uapi/asm/kvm.h
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240408185520.1550865-4-namhyung@kernel.org
Add bpf_link support for sk_msg and sk_skb programs. We have an
internal request to support bpf_link for sk_msg programs so user
space can have a uniform handling with bpf_link based libbpf
APIs. Using bpf_link based libbpf API also has a benefit which
makes system robust by decoupling prog life cycle and
attachment life cycle.
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240410043527.3737160-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The struct bpf_fib_lookup is supposed to be of size 64. A recent commit
59b418c706 ("bpf: Add a check for struct bpf_fib_lookup size") added
a static assertion to check this property so that future changes to the
structure will not accidentally break this assumption.
As it immediately turned out, on some 32-bit arm systems, when AEABI=n,
the total size of the structure was equal to 68, see [1]. This happened
because the bpf_fib_lookup structure contains a union of two 16-bit
fields:
union {
__u16 tot_len;
__u16 mtu_result;
};
which was supposed to compile to a 16-bit-aligned 16-bit field. On the
aforementioned setups it was instead both aligned and padded to 32-bits.
Declare this inner union as __attribute__((packed, aligned(2))) such
that it always is of size 2 and is aligned to 16 bits.
[1] https://lore.kernel.org/all/CA+G9fYtsoP51f-oP_Sp5MOq-Ffv8La2RztNpwvE6+R1VtFiLrw@mail.gmail.com/#t
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: e1850ea9bd ("bpf: bpf_fib_lookup return MTU value as output when looked up")
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240403123303.1452184-1-aspsk@isovalent.com
This commit duplicates the ethtool.h file from the include/uapi/linux
directory in the kernel source to the tools/include/uapi/linux directory.
This action ensures that the ethtool.h file used in the tools directory
is in sync with the kernel's version, maintaining consistency across the
codebase.
There are some checkpatch warnings in this file that could be cleaned up,
but I preferred to move it over as-is for now to avoid disrupting the code.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240402114529.545475-2-tushar.vyavahare@intel.com
Wire up BPF cookie for raw tracepoint programs (both BTF and non-BTF
aware variants). This brings them up to part w.r.t. BPF cookie usage
with classic tracepoint and fentry/fexit programs.
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Message-ID: <20240319233852.1977493-4-andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2024-03-11
We've added 59 non-merge commits during the last 9 day(s) which contain
a total of 88 files changed, 4181 insertions(+), 590 deletions(-).
The main changes are:
1) Enforce VM_IOREMAP flag and range in ioremap_page_range and introduce
VM_SPARSE kind and vm_area_[un]map_pages to be used in bpf_arena,
from Alexei.
2) Introduce bpf_arena which is sparse shared memory region between bpf
program and user space where structures inside the arena can have
pointers to other areas of the arena, and pointers work seamlessly for
both user-space programs and bpf programs, from Alexei and Andrii.
3) Introduce may_goto instruction that is a contract between the verifier
and the program. The verifier allows the program to loop assuming it's
behaving well, but reserves the right to terminate it, from Alexei.
4) Use IETF format for field definitions in the BPF standard
document, from Dave.
5) Extend struct_ops libbpf APIs to allow specify version suffixes for
stuct_ops map types, share the same BPF program between several map
definitions, and other improvements, from Eduard.
6) Enable struct_ops support for more than one page in trampolines,
from Kui-Feng.
7) Support kCFI + BPF on riscv64, from Puranjay.
8) Use bpf_prog_pack for arm64 bpf trampoline, from Puranjay.
9) Fix roundup_pow_of_two undefined behavior on 32-bit archs, from Toke.
====================
Link: https://lore.kernel.org/r/20240312003646.8692-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce bpf_arena, which is a sparse shared memory region between the bpf
program and user space.
Use cases:
1. User space mmap-s bpf_arena and uses it as a traditional mmap-ed
anonymous region, like memcached or any key/value storage. The bpf
program implements an in-kernel accelerator. XDP prog can search for
a key in bpf_arena and return a value without going to user space.
2. The bpf program builds arbitrary data structures in bpf_arena (hash
tables, rb-trees, sparse arrays), while user space consumes it.
3. bpf_arena is a "heap" of memory from the bpf program's point of view.
The user space may mmap it, but bpf program will not convert pointers
to user base at run-time to improve bpf program speed.
Initially, the kernel vm_area and user vma are not populated. User space
can fault in pages within the range. While servicing a page fault,
bpf_arena logic will insert a new page into the kernel and user vmas. The
bpf program can allocate pages from that region via
bpf_arena_alloc_pages(). This kernel function will insert pages into the
kernel vm_area. The subsequent fault-in from user space will populate that
page into the user vma. The BPF_F_SEGV_ON_FAULT flag at arena creation time
can be used to prevent fault-in from user space. In such a case, if a page
is not allocated by the bpf program and not present in the kernel vm_area,
the user process will segfault. This is useful for use cases 2 and 3 above.
bpf_arena_alloc_pages() is similar to user space mmap(). It allocates pages
either at a specific address within the arena or allocates a range with the
maple tree. bpf_arena_free_pages() is analogous to munmap(), which frees
pages and removes the range from the kernel vm_area and from user process
vmas.
bpf_arena can be used as a bpf program "heap" of up to 4GB. The speed of
bpf program is more important than ease of sharing with user space. This is
use case 3. In such a case, the BPF_F_NO_USER_CONV flag is recommended.
It will tell the verifier to treat the rX = bpf_arena_cast_user(rY)
instruction as a 32-bit move wX = wY, which will improve bpf prog
performance. Otherwise, bpf_arena_cast_user is translated by JIT to
conditionally add the upper 32 bits of user vm_start (if the pointer is not
NULL) to arena pointers before they are stored into memory. This way, user
space sees them as valid 64-bit pointers.
Diff https://github.com/llvm/llvm-project/pull/84410 enables LLVM BPF
backend generate the bpf_addr_space_cast() instruction to cast pointers
between address_space(1) which is reserved for bpf_arena pointers and
default address space zero. All arena pointers in a bpf program written in
C language are tagged as __attribute__((address_space(1))). Hence, clang
provides helpful diagnostics when pointers cross address space. Libbpf and
the kernel support only address_space == 1. All other address space
identifiers are reserved.
rX = bpf_addr_space_cast(rY, /* dst_as */ 1, /* src_as */ 0) tells the
verifier that rX->type = PTR_TO_ARENA. Any further operations on
PTR_TO_ARENA register have to be in the 32-bit domain. The verifier will
mark load/store through PTR_TO_ARENA with PROBE_MEM32. JIT will generate
them as kern_vm_start + 32bit_addr memory accesses. The behavior is similar
to copy_from_kernel_nofault() except that no address checks are necessary.
The address is guaranteed to be in the 4GB range. If the page is not
present, the destination register is zeroed on read, and the operation is
ignored on write.
rX = bpf_addr_space_cast(rY, 0, 1) tells the verifier that rX->type =
unknown scalar. If arena->map_flags has BPF_F_NO_USER_CONV set, then the
verifier converts such cast instructions to mov32. Otherwise, JIT will emit
native code equivalent to:
rX = (u32)rY;
if (rY)
rX |= clear_lo32_bits(arena->user_vm_start); /* replace hi32 bits in rX */
After such conversion, the pointer becomes a valid user pointer within
bpf_arena range. The user process can access data structures created in
bpf_arena without any additional computations. For example, a linked list
built by a bpf program can be walked natively by user space.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Barret Rhoden <brho@google.com>
Link: https://lore.kernel.org/bpf/20240308010812.89848-2-alexei.starovoitov@gmail.com
The ethtool-nl family does a good job exposing various protocol
related and IEEE/IETF statistics which used to get dumped under
ethtool -S, with creative names. Queue stats don't have a netlink
API, yet, and remain a lion's share of ethtool -S output for new
drivers. Not only is that bad because the names differ driver to
driver but it's also bug-prone. Intuitively drivers try to report
only the stats for active queues, but querying ethtool stats
involves multiple system calls, and the number of stats is
read separately from the stats themselves. Worse still when user
space asks for values of the stats, it doesn't inform the kernel
how big the buffer is. If number of stats increases in the meantime
kernel will overflow user buffer.
Add a netlink API for dumping queue stats. Queue information is
exposed via the netdev-genl family, so add the stats there.
Support per-queue and sum-for-device dumps. Latter will be useful
when subsequent patches add more interesting common stats than
just bytes and packets.
The API does not currently distinguish between HW and SW stats.
The expectation is that the source of the stats will either not
matter much (good packets) or be obvious (skb alloc errors).
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240306195509.1502746-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce may_goto instruction that from the verifier pov is similar to
open coded iterators bpf_for()/bpf_repeat() and bpf_loop() helper, but it
doesn't iterate any objects.
In assembly 'may_goto' is a nop most of the time until bpf runtime has to
terminate the program for whatever reason. In the current implementation
may_goto has a hidden counter, but other mechanisms can be used.
For programs written in C the later patch introduces 'cond_break' macro
that combines 'may_goto' with 'break' statement and has similar semantics:
cond_break is a nop until bpf runtime has to break out of this loop.
It can be used in any normal "for" or "while" loop, like
for (i = zero; i < cnt; cond_break, i++) {
The verifier recognizes that may_goto is used in the program, reserves
additional 8 bytes of stack, initializes them in subprog prologue, and
replaces may_goto instruction with:
aux_reg = *(u64 *)(fp - 40)
if aux_reg == 0 goto pc+off
aux_reg -= 1
*(u64 *)(fp - 40) = aux_reg
may_goto instruction can be used by LLVM to implement __builtin_memcpy,
__builtin_strcmp.
may_goto is not a full substitute for bpf_for() macro.
bpf_for() doesn't have induction variable that verifiers sees,
so 'i' in bpf_for(i, 0, 100) is seen as imprecise and bounded.
But when the code is written as:
for (i = 0; i < 100; cond_break, i++)
the verifier see 'i' as precise constant zero,
hence cond_break (aka may_goto) doesn't help to converge the loop.
A static or global variable can be used as a workaround:
static int zero = 0;
for (i = zero; i < 100; cond_break, i++) // works!
may_goto works well with arena pointers that don't need to be bounds
checked on access. Load/store from arena returns imprecise unbounded
scalar and loops with may_goto pass the verifier.
Reserve new opcode BPF_JMP | BPF_JCOND for may_goto insn.
JCOND stands for conditional pseudo jump.
Since goto_or_nop insn was proposed, it may use the same opcode.
may_goto vs goto_or_nop can be distinguished by src_reg:
code = BPF_JMP | BPF_JCOND
src_reg = 0 - may_goto
src_reg = 1 - goto_or_nop
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Tested-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240306031929.42666-2-alexei.starovoitov@gmail.com
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-02-29
We've added 119 non-merge commits during the last 32 day(s) which contain
a total of 150 files changed, 3589 insertions(+), 995 deletions(-).
The main changes are:
1) Extend the BPF verifier to enable static subprog calls in spin lock
critical sections, from Kumar Kartikeya Dwivedi.
2) Fix confusing and incorrect inference of PTR_TO_CTX argument type
in BPF global subprogs, from Andrii Nakryiko.
3) Larger batch of riscv BPF JIT improvements and enabling inlining
of the bpf_kptr_xchg() for RV64, from Pu Lehui.
4) Allow skeleton users to change the values of the fields in struct_ops
maps at runtime, from Kui-Feng Lee.
5) Extend the verifier's capabilities of tracking scalars when they
are spilled to stack, especially when the spill or fill is narrowing,
from Maxim Mikityanskiy & Eduard Zingerman.
6) Various BPF selftest improvements to fix errors under gcc BPF backend,
from Jose E. Marchesi.
7) Avoid module loading failure when the module trying to register
a struct_ops has its BTF section stripped, from Geliang Tang.
8) Annotate all kfuncs in .BTF_ids section which eventually allows
for automatic kfunc prototype generation from bpftool, from Daniel Xu.
9) Several updates to the instruction-set.rst IETF standardization
document, from Dave Thaler.
10) Shrink the size of struct bpf_map resp. bpf_array,
from Alexei Starovoitov.
11) Initial small subset of BPF verifier prepwork for sleepable bpf_timer,
from Benjamin Tissoires.
12) Fix bpftool to be more portable to musl libc by using POSIX's
basename(), from Arnaldo Carvalho de Melo.
13) Add libbpf support to gcc in CORE macro definitions,
from Cupertino Miranda.
14) Remove a duplicate type check in perf_event_bpf_event,
from Florian Lehner.
15) Fix bpf_spin_{un,}lock BPF helpers to actually annotate them
with notrace correctly, from Yonghong Song.
16) Replace the deprecated bpf_lpm_trie_key 0-length array with flexible
array to fix build warnings, from Kees Cook.
17) Fix resolve_btfids cross-compilation to non host-native endianness,
from Viktor Malik.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (119 commits)
selftests/bpf: Test if shadow types work correctly.
bpftool: Add an example for struct_ops map and shadow type.
bpftool: Generated shadow variables for struct_ops maps.
libbpf: Convert st_ops->data to shadow type.
libbpf: Set btf_value_type_id of struct bpf_map for struct_ops.
bpf: Replace bpf_lpm_trie_key 0-length array with flexible array
bpf, arm64: use bpf_prog_pack for memory management
arm64: patching: implement text_poke API
bpf, arm64: support exceptions
arm64: stacktrace: Implement arch_bpf_stack_walk() for the BPF JIT
bpf: add is_async_callback_calling_insn() helper
bpf: introduce in_sleepable() helper
bpf: allow more maps in sleepable bpf programs
selftests/bpf: Test case for lacking CFI stub functions.
bpf: Check cfi_stubs before registering a struct_ops type.
bpf: Clarify batch lookup/lookup_and_delete semantics
bpf, docs: specify which BPF_ABS and BPF_IND fields were zero
bpf, docs: Fix typos in instruction-set.rst
selftests/bpf: update tcp_custom_syncookie to use scalar packet offset
bpf: Shrink size of struct bpf_map/bpf_array.
...
====================
Link: https://lore.kernel.org/r/20240301001625.8800-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace deprecated 0-length array in struct bpf_lpm_trie_key with
flexible array. Found with GCC 13:
../kernel/bpf/lpm_trie.c:207:51: warning: array subscript i is outside array bounds of 'const __u8[0]' {aka 'const unsigned char[]'} [-Warray-bounds=]
207 | *(__be16 *)&key->data[i]);
| ^~~~~~~~~~~~~
../include/uapi/linux/swab.h:102:54: note: in definition of macro '__swab16'
102 | #define __swab16(x) (__u16)__builtin_bswap16((__u16)(x))
| ^
../include/linux/byteorder/generic.h:97:21: note: in expansion of macro '__be16_to_cpu'
97 | #define be16_to_cpu __be16_to_cpu
| ^~~~~~~~~~~~~
../kernel/bpf/lpm_trie.c:206:28: note: in expansion of macro 'be16_to_cpu'
206 | u16 diff = be16_to_cpu(*(__be16 *)&node->data[i]
^
| ^~~~~~~~~~~
In file included from ../include/linux/bpf.h:7:
../include/uapi/linux/bpf.h:82:17: note: while referencing 'data'
82 | __u8 data[0]; /* Arbitrary size */
| ^~~~
And found at run-time under CONFIG_FORTIFY_SOURCE:
UBSAN: array-index-out-of-bounds in kernel/bpf/lpm_trie.c:218:49
index 0 is out of range for type '__u8 [*]'
Changing struct bpf_lpm_trie_key is difficult since has been used by
userspace. For example, in Cilium:
struct egress_gw_policy_key {
struct bpf_lpm_trie_key lpm_key;
__u32 saddr;
__u32 daddr;
};
While direct references to the "data" member haven't been found, there
are static initializers what include the final member. For example,
the "{}" here:
struct egress_gw_policy_key in_key = {
.lpm_key = { 32 + 24, {} },
.saddr = CLIENT_IP,
.daddr = EXTERNAL_SVC_IP & 0Xffffff,
};
To avoid the build time and run time warnings seen with a 0-sized
trailing array for struct bpf_lpm_trie_key, introduce a new struct
that correctly uses a flexible array for the trailing bytes,
struct bpf_lpm_trie_key_u8. As part of this, include the "header"
portion (which is just the "prefixlen" member), so it can be used
by anything building a bpf_lpr_trie_key that has trailing members that
aren't a u8 flexible array (like the self-test[1]), which is named
struct bpf_lpm_trie_key_hdr.
Unfortunately, C++ refuses to parse the __struct_group() helper, so
it is not possible to define struct bpf_lpm_trie_key_hdr directly in
struct bpf_lpm_trie_key_u8, so we must open-code the union directly.
Adjust the kernel code to use struct bpf_lpm_trie_key_u8 through-out,
and for the selftest to use struct bpf_lpm_trie_key_hdr. Add a comment
to the UAPI header directing folks to the two new options.
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Closes: https://paste.debian.net/hidden/ca500597/
Link: https://lore.kernel.org/all/202206281009.4332AA33@keescook/ [1]
Link: https://lore.kernel.org/bpf/20240222155612.it.533-kees@kernel.org
The batch lookup and lookup_and_delete APIs have two parameters,
in_batch and out_batch, to facilitate iterative
lookup/lookup_and_deletion operations for supported maps. Except NULL
for in_batch at the start of these two batch operations, both parameters
need to point to memory equal or larger than the respective map key
size, except for various hashmaps (hash, percpu_hash, lru_hash,
lru_percpu_hash) where the in_batch/out_batch memory size should be
at least 4 bytes.
Document these semantics to clarify the API.
Signed-off-by: Martin Kelly <martin.kelly@crowdstrike.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240221211838.1241578-1-martin.kelly@crowdstrike.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
drivers/net/ethernet/stmicro/stmmac/common.h
38cc3c6dcc ("net: stmmac: protect updates of 64-bit statistics counters")
fd5a6a7131 ("net: stmmac: est: Per Tx-queue error count for HLBF")
c5c3e1bfc9 ("net: stmmac: Offload queueMaxSDU from tc-taprio")
drivers/net/wireless/microchip/wilc1000/netdev.c
c901388028 ("wifi: fill in MODULE_DESCRIPTION()s for wilc1000")
328efda22a ("wifi: wilc1000: do not realloc workqueue everytime an interface is added")
net/unix/garbage.c
11498715f2 ("af_unix: Remove io_uring code for GC.")
1279f9d9de ("af_unix: Call kfree_skb() for dead unix_(sk)->oob_skb in GC.")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for the independent control state machine per IEEE
802.1AX-2008 5.4.15 in addition to the existing implementation of the
coupled control state machine.
Introduces two new states, AD_MUX_COLLECTING and AD_MUX_DISTRIBUTING in
the LACP MUX state machine for separated handling of an initial
Collecting state before the Collecting and Distributing state. This
enables a port to be in a state where it can receive incoming packets
while not still distributing. This is useful for reducing packet loss when
a port begins distributing before its partner is able to collect.
Added new functions such as bond_set_slave_tx_disabled_flags and
bond_set_slave_rx_enabled_flags to precisely manage the port's collecting
and distributing states. Previously, there was no dedicated method to
disable TX while keeping RX enabled, which this patch addresses.
Note that the regular flow process in the kernel's bonding driver remains
unaffected by this patch. The extension requires explicit opt-in by the
user (in order to ensure no disruptions for existing setups) via netlink
support using the new bonding parameter coupled_control. The default value
for coupled_control is set to 1 so as to preserve existing behaviour.
Signed-off-by: Aahil Awatramani <aahila@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20240202175858.1573852-1-aahila@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
To pick the changes from:
35e27a5744 ("fs: keep struct mnt_id_req extensible")
b4c2bea8ce ("add listmount(2) syscall")
46eae99ef7 ("add statmount(2) syscall")
That doesn't change anything in tools this time as nothing that is
harvested by the beauty scripts got changed:
$ ls -1 tools/perf/trace/beauty/*mount*sh
tools/perf/trace/beauty/fsmount.sh
tools/perf/trace/beauty/mount_flags.sh
tools/perf/trace/beauty/move_mount_flags.sh
$
This addresses this perf build warning.
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/mount.h include/uapi/linux/mount.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZbkMiB7ZcOsLP2V5@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-01-26
We've added 107 non-merge commits during the last 4 day(s) which contain
a total of 101 files changed, 6009 insertions(+), 1260 deletions(-).
The main changes are:
1) Add BPF token support to delegate a subset of BPF subsystem
functionality from privileged system-wide daemons such as systemd
through special mount options for userns-bound BPF fs to a trusted
& unprivileged application. With addressed changes from Christian
and Linus' reviews, from Andrii Nakryiko.
2) Support registration of struct_ops types from modules which helps
projects like fuse-bpf that seeks to implement a new struct_ops type,
from Kui-Feng Lee.
3) Add support for retrieval of cookies for perf/kprobe multi links,
from Jiri Olsa.
4) Bigger batch of prep-work for the BPF verifier to eventually support
preserving boundaries and tracking scalars on narrowing fills,
from Maxim Mikityanskiy.
5) Extend the tc BPF flavor to support arbitrary TCP SYN cookies to help
with the scenario of SYN floods, from Kuniyuki Iwashima.
6) Add code generation to inline the bpf_kptr_xchg() helper which
improves performance when stashing/popping the allocated BPF objects,
from Hou Tao.
7) Extend BPF verifier to track aligned ST stores as imprecise spilled
registers, from Yonghong Song.
8) Several fixes to BPF selftests around inline asm constraints and
unsupported VLA code generation, from Jose E. Marchesi.
9) Various updates to the BPF IETF instruction set draft document such
as the introduction of conformance groups for instructions,
from Dave Thaler.
10) Fix BPF verifier to make infinite loop detection in is_state_visited()
exact to catch some too lax spill/fill corner cases,
from Eduard Zingerman.
11) Refactor the BPF verifier pointer ALU check to allow ALU explicitly
instead of implicitly for various register types, from Hao Sun.
12) Fix the flaky tc_redirect_dtime BPF selftest due to slowness
in neighbor advertisement at setup time, from Martin KaFai Lau.
13) Change BPF selftests to skip callback tests for the case when the
JIT is disabled, from Tiezhu Yang.
14) Add a small extension to libbpf which allows to auto create
a map-in-map's inner map, from Andrey Grafin.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (107 commits)
selftests/bpf: Add missing line break in test_verifier
bpf, docs: Clarify definitions of various instructions
bpf: Fix error checks against bpf_get_btf_vmlinux().
bpf: One more maintainer for libbpf and BPF selftests
selftests/bpf: Incorporate LSM policy to token-based tests
selftests/bpf: Add tests for LIBBPF_BPF_TOKEN_PATH envvar
libbpf: Support BPF token path setting through LIBBPF_BPF_TOKEN_PATH envvar
selftests/bpf: Add tests for BPF object load with implicit token
selftests/bpf: Add BPF object loading tests with explicit token passing
libbpf: Wire up BPF token support at BPF object level
libbpf: Wire up token_fd into feature probing logic
libbpf: Move feature detection code into its own file
libbpf: Further decouple feature checking logic from bpf_object
libbpf: Split feature detectors definitions from cached results
selftests/bpf: Utilize string values for delegate_xxx mount options
bpf: Support symbolic BPF FS delegation mount options
bpf: Fail BPF_TOKEN_CREATE if no delegation option was set on BPF FS
bpf,selinux: Allocate bpf_security_struct per BPF token
selftests/bpf: Add BPF token-enabled tests
libbpf: Add BPF token support to bpf_prog_load() API
...
====================
Link: https://lore.kernel.org/r/20240126215710.19855-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Picking the changes from:
8570c27932 ("drm/syncobj: Add deadline support for syncobj waits")
9724ed6c1b ("drm: Introduce DRM_CLIENT_CAP_CURSOR_PLANE_HOTSPOT")
e4d983acff ("drm: introduce DRM_CAP_ATOMIC_ASYNC_PAGE_FLIP")
d208d87566 ("drm: introduce CLOSEFB IOCTL")
afa5cf3175 ("drm/i915/uapi: fix typos/spellos and punctuation")
Addressing these perf build warnings:
Warning: Kernel ABI header differences:
Now 'perf trace' and other code that might use the
tools/perf/trace/beauty autogenerated tables will be able to translate
this new ioctl command into a string:
$ tools/perf/trace/beauty/drm_ioctl.sh > before
$ cp include/uapi/drm/drm.h tools/include/uapi/drm/drm.h
$ tools/perf/trace/beauty/drm_ioctl.sh > after
$ diff -u before after
--- before 2024-01-26 10:54:23.486381862 -0300
+++ after 2024-01-26 10:54:35.767902442 -0300
@@ -109,6 +109,7 @@
[0xCD] = "SYNCOBJ_TIMELINE_SIGNAL",
[0xCE] = "MODE_GETFB2",
[0xCF] = "SYNCOBJ_EVENTFD",
+ [0xD0] = "MODE_CLOSEFB",
[DRM_COMMAND_BASE + 0x00] = "I915_INIT",
[DRM_COMMAND_BASE + 0x01] = "I915_FLUSH",
[DRM_COMMAND_BASE + 0x02] = "I915_FLIP",
$
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Simon Ser <contact@emersion.fr>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Zack Rusin <zack.rusin@broadcom.com>
Link: https://lore.kernel.org/lkml/ZbPIN9Dcc5AM0uxo@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add basic support of BPF token to BPF_PROG_LOAD. BPF_F_TOKEN_FD flag
should be set in prog_flags field when providing prog_token_fd.
Wire through a set of allowed BPF program types and attach types,
derived from BPF FS at BPF token creation time. Then make sure we
perform bpf_token_capable() checks everywhere where it's relevant.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-7-andrii@kernel.org
Accept BPF token FD in BPF_BTF_LOAD command to allow BTF data loading
through delegated BPF token. BPF_F_TOKEN_FD flag has to be specified
when passing BPF token FD. Given BPF_BTF_LOAD command didn't have flags
field before, we also add btf_flags field.
BTF loading is a pretty straightforward operation, so as long as BPF
token is created with allow_cmds granting BPF_BTF_LOAD command, kernel
proceeds to parsing BTF data and creating BTF object.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-6-andrii@kernel.org
Allow providing token_fd for BPF_MAP_CREATE command to allow controlled
BPF map creation from unprivileged process through delegated BPF token.
New BPF_F_TOKEN_FD flag is added to specify together with BPF token FD
for BPF_MAP_CREATE command.
Wire through a set of allowed BPF map types to BPF token, derived from
BPF FS at BPF token creation time. This, in combination with allowed_cmds
allows to create a narrowly-focused BPF token (controlled by privileged
agent) with a restrictive set of BPF maps that application can attempt
to create.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-5-andrii@kernel.org
Add new kind of BPF kernel object, BPF token. BPF token is meant to
allow delegating privileged BPF functionality, like loading a BPF
program or creating a BPF map, from privileged process to a *trusted*
unprivileged process, all while having a good amount of control over which
privileged operations could be performed using provided BPF token.
This is achieved through mounting BPF FS instance with extra delegation
mount options, which determine what operations are delegatable, and also
constraining it to the owning user namespace (as mentioned in the
previous patch).
BPF token itself is just a derivative from BPF FS and can be created
through a new bpf() syscall command, BPF_TOKEN_CREATE, which accepts BPF
FS FD, which can be attained through open() API by opening BPF FS mount
point. Currently, BPF token "inherits" delegated command, map types,
prog type, and attach type bit sets from BPF FS as is. In the future,
having an BPF token as a separate object with its own FD, we can allow
to further restrict BPF token's allowable set of things either at the
creation time or after the fact, allowing the process to guard itself
further from unintentionally trying to load undesired kind of BPF
programs. But for now we keep things simple and just copy bit sets as is.
When BPF token is created from BPF FS mount, we take reference to the
BPF super block's owning user namespace, and then use that namespace for
checking all the {CAP_BPF, CAP_PERFMON, CAP_NET_ADMIN, CAP_SYS_ADMIN}
capabilities that are normally only checked against init userns (using
capable()), but now we check them using ns_capable() instead (if BPF
token is provided). See bpf_token_capable() for details.
Such setup means that BPF token in itself is not sufficient to grant BPF
functionality. User namespaced process has to *also* have necessary
combination of capabilities inside that user namespace. So while
previously CAP_BPF was useless when granted within user namespace, now
it gains a meaning and allows container managers and sys admins to have
a flexible control over which processes can and need to use BPF
functionality within the user namespace (i.e., container in practice).
And BPF FS delegation mount options and derived BPF tokens serve as
a per-container "flag" to grant overall ability to use bpf() (plus further
restrict on which parts of bpf() syscalls are treated as namespaced).
Note also, BPF_TOKEN_CREATE command itself requires ns_capable(CAP_BPF)
within the BPF FS owning user namespace, rounding up the ns_capable()
story of BPF token. Also creating BPF token in init user namespace is
currently not supported, given BPF token doesn't have any effect in init
user namespace anyways.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/bpf/20240124022127.2379740-4-andrii@kernel.org
Pass the fd of a btf from the userspace to the bpf() syscall, and then
convert the fd into a btf. The btf is generated from the module that
defines the target BPF struct_ops type.
In order to inform the kernel about the module that defines the target
struct_ops type, the userspace program needs to provide a btf fd for the
respective module's btf. This btf contains essential information on the
types defined within the module, including the target struct_ops type.
A btf fd must be provided to the kernel for struct_ops maps and for the bpf
programs attached to those maps.
In the case of the bpf programs, the attach_btf_obj_fd parameter is passed
as part of the bpf_attr and is converted into a btf. This btf is then
stored in the prog->aux->attach_btf field. Here, it just let the verifier
access attach_btf directly.
In the case of struct_ops maps, a btf fd is passed as value_type_btf_obj_fd
of bpf_attr. The bpf_struct_ops_map_alloc() function converts the fd to a
btf and stores it as st_map->btf. A flag BPF_F_VTYPE_BTF_OBJ_FD is added
for map_flags to indicate that the value of value_type_btf_obj_fd is set.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-9-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Include btf object id (btf_obj_id) in bpf_map_info so that tools (ex:
bpftools struct_ops dump) know the correct btf from the kernel to look up
type information of struct_ops types.
Since struct_ops types can be defined and registered in a module. The
type information of a struct_ops type are defined in the btf of the
module defining it. The userspace tools need to know which btf is for
the module defining a struct_ops type.
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Link: https://lore.kernel.org/r/20240119225005.668602-7-thinker.li@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
At the moment we don't store cookie for perf_event probes,
while we do that for the rest of the probes.
Adding cookie fields to struct bpf_link_info perf event
probe records:
perf_event.uprobe
perf_event.kprobe
perf_event.tracepoint
perf_event.perf_event
And the code to store that in bpf_link_info struct.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20240119110505.400573-2-jolsa@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
