Jonathan writes:
1st set of IIO new device support, features and cleanup for 5.17
Includes some fixes that were either late breaking, low priority or
complex enough to not be good to rush in late in the cycle.
Tree rebased today to fix up some trivial issues + pull in a fix that
was previously on the fixes-togreg branch. Vast majority have been
in linux-next for some time now.
New device support
* adi,ad7293
- New driver and bindings for this Power Amplifier drain current
controller. A complex device with various related monitoring functions.
* adi,ad75513R
- New driver and bindings for this combined ADC and DAC device.
- A few follow up fixes.
* adi,admv8818
- New driver (and type) for this 2-18GHz filter device. Includes
bindings and ABI documentation to allow clk_notifier based auto
adjustment of the filters in appropriate applications.
* liteon,ltr501
- Support for the ltr303. ID and chip specific info table.
* xilinx,ams
- New generic firmware function fwnode_iomap() as used in this driver.
- New driver and bindings for this ADC and on-chip sensors as found
in various Xilinx devices.
Core
* Introduced IIO_VAL_INT_64 which uses val and val2 in IIO callbacks to
form a 64 bit integer when higher precision needed.
* Allow IIO_ENUM_AVAILABLE to be used with different shared values.
* Fix a long term issue with scheduling whilst atomic when iio_trig_poll()
is called but no trigger consumers are actually enabled and hence the
trigger may be reenabled from the interrupt handler. Seen in the wild
on the tsc2046.
* Mark iio_device_type const.
* buffer: Use a separate index variable to simplify code.
* buffer-dma: Clear out unused struct iio_buffer_block
* buffer-dmaengine: Switch to cheaper round_down() as power of 2 values.
Tests/tools
* format_value
- Check against NULL returns from allocations in tests.
- Add IIO_VAL_INT_64 test case.
* event_monitor
- Flush the output after event to given more consistent latency
when tool output piped to other programs.
Driver Features
* axp20x
- Add support for NTC thermistor channel and document TS pin binding.
* arm,scmi
- Add reading of raw channel values (using IIO_VAL_INT_64)
* liteon,ltr501
- Add proximity-near-level support and dt-binding.
Tree wide cleanup
* Remove no-op trigger ops from multiple drivers.
* Stop using dev_get_drvdata() on the iio_dev->dev in various drivers
and then stop assigning it to allow this to be used for other purposes.
We can always get to the indio_dev using dev_to_iio_dev() which is
a container_of() based approach. Also cleanup up some related unnecessary
convoluted cases.
- atmel,at91-sam5d2
- nxp,imx7d
- meas,ms5611
- st,st_sensors
* Where available (or easy to introduce) use the scan_type.* values
in place of a second copy for read_raw and similar paths.
- adi,ad7266
- bosch,bma220
- fsl,mac3110
- fsl,mma7455
- fsl,mpl3115
- kionix,kcjk-1013
- sensortek,stk8ba50
- sensortek,stk8312
- ti,adc12138
- ti,ads1015
- vti,sca3000
- xilinx,xadc-core
* Switch drives over to generic firmware properties including appropriate
header changes to avoid including of.h
- Various DACs had false CONFIG_OF dependencies.
- dpot-dac
- envelope-detector
- adi,ad5755
- adi,ad5758
- capella,cm3605
- maxim,max9611
- microchip,mcp41010
- microchip,mcp3911
- ti,adc12138
* Trivial clang warning fixes for W=1 warnings.
Driver specific cleanup and minor fixes
* adi,ad7606
- Comment fixes.
* ams,ad3935
- Drop pointless cast to the same type.
* atmel,at91-sama5d2
- Fix wrong cast of iio_dev->dev to platform_device that happened to
be harmless.
* fsl,mma7660
- Stop i2c remove() function returning an error code. Part of a rework
to eventually stop returning anything from these.
* fsl,mma8452
- Use correct type for local irqreturn_t.
* nxp,imx8mq
- Maintainer email address update.
* nxp,lpc18xx_adc
- Ensure clk_prepare_enable() called before clk_get_rate().
- Switch of.h for mod_devicetable.h to reflect no of specific functions,
just the id table.
* renesas,rzg2l
- Drop a dev_err() that just duplicates error printed in platform_get_irq()
* sgx,vz89x
- Drop pointless cast.
* st,lsm6dsx
- Make it possible to disable the sensorhub from DT to avoid a corner
case where the address of a slave device many be accidentally modified.
* st,stm32-adc
- Stop leaking an of_node in an error path.
* st,stmp2
- Avoid wrong sized type for bit field which could result in
over-reading (harmless). Precursor to enabling -Warray-bounds.
* ti,adc081c
- Put back some ACPI support for non standards compliant ADC081C
ID because it is known to be in the wild on some Aaeon boards.
* ti,ads8688
- Cleanup redundant local ret variable assignment.
* ti,ina2xx-adc
- Use helper macro kthread_run() to replace some boilerplate.
- Avoid double reference counting.
- Drop pointless cast.
* xilinx,xadc
- Make the IRQ optional as not always wired to the host system.
* tag 'iio-for-5.17a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (103 commits)
iio: adc: ti-adc081c: Partial revert of removal of ACPI IDs
iio:addac:ad74413r: Fix uninitialized ret in a path that won't be hit.
MAINTAINERS: Add maintainer for xilinx-ams
dt-bindings: iio: adc: Add Xilinx AMS binding documentation
iio: adc: Add Xilinx AMS driver
device property: Add fwnode_iomap()
iio:accel:kxcjk-1013: Mark struct __maybe_unused to avoid warning.
iio:accel:bmc150: Mark structure __maybe_unused as only needed with for pm ops.
iio:dummy: Drop set but unused variable len.
iio:magn:ak8975: Suppress clang W=1 warning about pointer to enum conversion.
iio:imu:inv_mpu6050: Suppress clang W=1 warning about pointer to enum conversion.
iio:imu:inv_icm42600: Suppress clang W=1 warning about pointer to enum conversion.
iio:dac:mcp4725: Suppress clang W=1 warning about pointer to enum conversion.
iio:amplifiers:hmc425a: Suppress clang W=1 warning about pointer to enum conversion.
iio:adc:ti-ads1015: Suppress clang W=1 warning about pointer to enum conversion.
iio:adc:rcar: Suppress clang W=1 warning about pointer to enum conversion.
iio:adc:ina2xx-adc: Suppress clang W=1 warning about pointer to enum conversion.
iio:accel:bma180: Suppress clang W=1 warning about pointer to enum conversion.
drivers:iio:dac: Add AD3552R driver support
dt-bindings: iio: dac: Add adi,ad3552r.yaml
...
Pull char/misc driver fixes from Greg KH:
"Here are a bunch of small char/misc and other driver subsystem fixes.
Included in here are:
- iio driver fixes for reported problems
- phy driver fixes for a number of reported problems
- mhi resume bugfix for broken hardware
- nvmem driver fix
- rtsx driver fix for irq issues
- fastrpc packet parsing fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (33 commits)
bus: mhi: core: Add support for forced PM resume
iio: trigger: stm32-timer: fix MODULE_ALIAS
misc: rtsx: Avoid mangling IRQ during runtime PM
nvmem: eeprom: at25: fix FRAM byte_len
misc: fastrpc: fix improper packet size calculation
MAINTAINERS: add maintainer for Qualcomm FastRPC driver
bus: mhi: pci_generic: Fix device recovery failed issue
iio: adc: stm32: fix null pointer on defer_probe error
phy: HiSilicon: Fix copy and paste bug in error handling
dt-bindings: phy: zynqmp-psgtr: fix USB phy name
phy: ti: omap-usb2: Fix the kernel-doc style
phy: qualcomm: ipq806x-usb: Fix kernel-doc style
iio: at91-sama5d2: Fix incorrect sign extension
iio: adc: axp20x_adc: fix charging current reporting on AXP22x
iio: gyro: adxrs290: fix data signedness
phy: ti: tusb1210: Fix the kernel-doc warn
phy: qualcomm: usb-hsic: Fix the kernel-doc warn
phy: qualcomm: qmp: Add missing struct documentation
phy: mvebu-cp110-utmi: Fix kernel-doc warns
iio: ad7768-1: Call iio_trigger_notify_done() on error
...
Probably a cut and paste error, but the binding header used in the
example is for the wrong device and nothing from it is used.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Reviewed-by: Rob Herring <robh@kernel.org>
The AD74412R and AD74413R are quad-channel, software configurable,
input/output solutions for building and process control applications.
They contain functionality for analog output, analog input, digital input,
resistance temperature detector, and thermocouple measurements integrated
into a single chip solution with an SPI interface.
The devices feature a 16-bit ADC and four configurable 13-bit DACs to
provide four configurable input/output channels and a suite of diagnostic
functions.
The AD74413R differentiates itself from the AD74412R by being
HART-compatible.
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211205114045.173612-3-cosmin.tanislav@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Pull devicetree fixes from Rob Herring:
- Revert schema checks on %.dtb targets. This was problematic for some
external build tools.
- A few DT binding example fixes
- Add back dropped 'enet-phy-lane-no-swap' Ethernet PHY property
- Drop erroneous if/then schema in nxp,imx7-mipi-csi2
- Add a quirk to fix some interrupt controllers use of 'interrupt-map'
* tag 'devicetree-fixes-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
Revert "kbuild: Enable DT schema checks for %.dtb targets"
dt-bindings: bq25980: Fixup the example
dt-bindings: input: gpio-keys: Fix interrupts in example
dt-bindings: net: Reintroduce PHY no lane swap binding
dt-bindings: media: nxp,imx7-mipi-csi2: Drop bad if/then schema
of/irq: Add a quirk for controllers with their own definition of interrupt-map
dt-bindings: iio: adc: exynos-adc: Fix node name in example
Pull sound fixes from Takashi Iwai:
"Another collection of small fixes. It's still not quite calm yet, but
nothing looks scary.
ALSA core got a few fixes for covering the issues detected by fuzzer
and the 32bit compat problem of control API, while the rest are all
device-specific small fixes, including the continued fixes for Tegra"
* tag 'sound-5.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: hda/realtek - Add headset Mic support for Lenovo ALC897 platform
ALSA: usb-audio: Reorder snd_djm_devices[] entries
ALSA: hda/realtek: Fix quirk for TongFang PHxTxX1
ALSA: ctl: Fix copy of updated id with element read/write
ALSA: pcm: oss: Handle missing errors in snd_pcm_oss_change_params*()
ALSA: pcm: oss: Limit the period size to 16MB
ALSA: pcm: oss: Fix negative period/buffer sizes
ASoC: codecs: wsa881x: fix return values from kcontrol put
ASoC: codecs: wcd934x: return correct value from mixer put
ASoC: codecs: wcd934x: handle channel mappping list correctly
ASoC: qdsp6: q6routing: Fix return value from msm_routing_put_audio_mixer
ASoC: SOF: Intel: Retry codec probing if it fails
ASoC: amd: fix uninitialized variable in snd_acp6x_probe()
ASoC: rockchip: i2s_tdm: Dup static DAI template
ASoC: rt5682s: Fix crash due to out of scope stack vars
ASoC: rt5682: Fix crash due to out of scope stack vars
ASoC: tegra: Use normal system sleep for ADX
ASoC: tegra: Use normal system sleep for AMX
ASoC: tegra: Use normal system sleep for Mixer
ASoC: tegra: Use normal system sleep for MVC
...
This binding was already documented in phy.txt, commit 252ae5330d
("Documentation: devicetree: Add PHY no lane swap binding"), but got
accidently removed during YAML conversion in commit d8704342c1
("dt-bindings: net: Add a YAML schemas for the generic PHY options").
Note: 'enet-phy-lane-no-swap' and the absence of 'enet-phy-lane-swap' are
not identical, as the former one disable this feature, while the latter
one doesn't change anything.
Fixes: d8704342c1 ("dt-bindings: net: Add a YAML schemas for the generic PHY options")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20211130082756.713919-1-alexander.stein@ew.tq-group.com
Signed-off-by: Rob Herring <robh@kernel.org>
Pull spi fix from Mark Brown:
"Just one trivial update adding a device ID to the DT bindings"
* tag 'spi-fix-v5.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-rockchip: Add rk3568-spi compatible
ASoC: Fixes for v5.16
A relatively large collection of updates, the size is increased quite a
bit by there being some repetitive changes for similar issues that occur
multiple times with both notifying control value changes and runtime PM.
The Rockchip update looks at first glance like a cleanup but fixes
instantiation of the hardware on some systems.
The if/then schema for 'data-lanes' doesn't work as 'compatible' is at a
different level than 'data-lanes'. To make it work, the if/then schema
would have to be moved to the top level and then whole hierarchy of
nodes down to 'data-lanes' created. I don't think it is worth the
complexity to do that, so let's just drop it.
The error in this schema is masked by a fixup in the tools causing the
'allOf' to get overwritten. Removing the fixup as part of moving to
json-schema draft 2019-09 revealed the issue:
Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.example.dt.yaml: mipi-csi@30750000: ports:port@0:endpoint:data-lanes:0: [1] is too short
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.example.dt.yaml: mipi-csi@32e30000: ports:port@0:endpoint:data-lanes:0: [1, 2, 3, 4] is too long
From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml
The if condition was always true because 'compatible' did not exist in
'endpoint' node and a non-existent property is true for json-schema.
Fixes: 85b62ff2cb ("media: dt-bindings: media: nxp,imx7-mipi-csi2: Add i.MX8MM support")
Cc: Rui Miguel Silva <rmfrfs@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: linux-media@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Link: https://lore.kernel.org/r/20211203164828.187642-1-robh@kernel.org
Both, hardware and drivers does support interrupts.
Fix warnings as:
arch/arm/boot/dts/tegra30-microsoft-surface-rt-efi.dt.yaml: audio-codec@1a: 'interrupt-parent', 'interrupts' do not match any of the regexes: 'pinctrl-[0-9]+'
From schema: /home/runner/work/linux/linux/Documentation/devicetree/bindings/sound/wlf,wm8962.yaml
Fixes: cd51b942f3 ("ASoC: dt-bindings: wlf,wm8962: Convert to json-schema")
Signed-off-by: David Heidelberg <david@ixit.cz>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20211124155101.59694-1-david@ixit.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
The i.MX 8QM DTS files use two compatibles, so update the binding to fix
dtbs_check warnings like:
arch/arm64/boot/dts/freescale/imx8qm-mek.dt.yaml: i2c@5a800000:
compatible: ['fsl,imx8qm-lpi2c', 'fsl,imx7ulp-lpi2c'] is too long
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Pull devicetree fixes from Rob Herring:
- Two fixes due to DT node name changes on Arm, Ltd. boards
- Treewide rename of Ingenic CGU headers
- Update ST email addresses
- Remove Netlogic DT bindings
- Dropping few more cases of redundant 'maxItems' in schemas
- Convert toshiba,tc358767 bridge binding to schema
* tag 'devicetree-fixes-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: watchdog: sunxi: fix error in schema
bindings: media: venus: Drop redundant maxItems for power-domain-names
dt-bindings: Remove Netlogic bindings
clk: versatile: clk-icst: Ensure clock names are unique
of: Support using 'mask' in making device bus id
dt-bindings: treewide: Update @st.com email address to @foss.st.com
dt-bindings: media: Update maintainers for st,stm32-hwspinlock.yaml
dt-bindings: media: Update maintainers for st,stm32-cec.yaml
dt-bindings: mfd: timers: Update maintainers for st,stm32-timers
dt-bindings: timer: Update maintainers for st,stm32-timer
dt-bindings: i2c: imx: hardware do not restrict clock-frequency to only 100 and 400 kHz
dt-bindings: display: bridge: Convert toshiba,tc358767.txt to yaml
dt-bindings: Rename Ingenic CGU headers to ingenic,*.h
Pull more clk updates from Stephen Boyd:
"This is the second batch of clk driver updates that needed a little
more time to soak in linux-next.
- Use modern i2c probe in vc5
- Cleanup some includes
- Update links to datasheets
- Add UniPhier NX1 SoC clk support
- Fix DT bindings for SiFive FU740
- Revert the module platform driver support for Rockchip because it
wasn't actually tested
- Fix the composite clk code again as the previous fix had a one line
bug that broke rate changes for clks that want to use the same
parent still
- Use the right table for a divider in ast2600 driver
- Get rid of gcc_aggre1_pnoc_ahb_clk in qcom clk driver again because
its critical but unused"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: qcom: gcc-msm8996: Drop (again) gcc_aggre1_pnoc_ahb_clk
clk: imx8m: Do not set IMX_COMPOSITE_CORE for non-regular composites
clk/ast2600: Fix soc revision for AHB
clk: composite: Fix 'switching' to same clock
clk: rockchip: drop module parts from rk3399 and rk3568 drivers
Revert "clk: rockchip: use module_platform_driver_probe"
clk:mediatek: remove duplicate include in clk-mt8195-imp_iic_wrap.c
dt-bindings: clock: fu740-prci: add reset-cells
clk: uniphier: Add SoC-glue clock source selector support for Pro4
dt-bindings: clock: uniphier: Add clock binding for SoC-glue
clk: uniphier: Add NX1 clock support
dt-bindings: clock: uniphier: Add NX1 clock binding
clk: uniphier: Add audio system and video input clock control for PXs3
clk: si5351: Update datasheet references
clk: vc5: Use i2c .probe_new
clk/actions/owl-factor.c: remove superfluous headers
clk: ingenic: Fix bugs with divided dividers
Pull pwm updates from Thierry Reding:
"This set is mostly small fixes and cleanups, so more of a janitorial
update for this cycle"
* tag 'pwm/for-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: vt8500: Rename pwm_busy_wait() to make it obviously driver-specific
dt-bindings: pwm: tpu: Add R-Car M3-W+ device tree bindings
dt-bindings: pwm: tpu: Add R-Car V3U device tree bindings
pwm: pwm-samsung: Trigger manual update when disabling PWM
pwm: visconti: Simplify using devm_pwmchip_add()
pwm: samsung: Describe driver in Kconfig
pwm: Make it explicit that pwm_apply_state() might sleep
pwm: Add might_sleep() annotations for !CONFIG_PWM API functions
pwm: atmel: Drop unused header
Pull more drm updates from Dave Airlie:
"I missed a drm-misc-next pull for the main pull last week. It wasn't
that major and isn't the bulk of this at all. This has a bunch of
fixes all over, a lot for amdgpu and i915.
bridge:
- HPD improvments for lt9611uxc
- eDP aux-bus support for ps8640
- LVDS data-mapping selection support
ttm:
- remove huge page functionality (needs reworking)
- fix a race condition during BO eviction
panels:
- add some new panels
fbdev:
- fix double-free
- remove unused scrolling acceleration
- CONFIG_FB dep improvements
locking:
- improve contended locking logging
- naming collision fix
dma-buf:
- add dma_resv_for_each_fence iterator
- fix fence refcounting bug
- name locking fixesA
prime:
- fix object references during mmap
nouveau:
- various code style changes
- refcount fix
- device removal fixes
- protect client list with a mutex
- fix CE0 address calculation
i915:
- DP rates related fixes
- Revert disabling dual eDP that was causing state readout problems
- put the cdclk vtables in const data
- Fix DVO port type for older platforms
- Fix blankscreen by turning DP++ TMDS output buffers on encoder->shutdown
- CCS FBs related fixes
- Fix recursive lock in GuC submission
- Revert guc_id from i915_request tracepoint
- Build fix around dmabuf
amdgpu:
- GPU reset fix
- Aldebaran fix
- Yellow Carp fixes
- DCN2.1 DMCUB fix
- IOMMU regression fix for Picasso
- DSC display fixes
- BPC display calculation fixes
- Other misc display fixes
- Don't allow partial copy from user for DC debugfs
- SRIOV fixes
- GFX9 CSB pin count fix
- Various IP version check fixes
- DP 2.0 fixes
- Limit DCN1 MPO fix to DCN1
amdkfd:
- SVM fixes
- Fix gfx version for renoir
- Reset fixes
udl:
- timeout fix
imx:
- circular locking fix
virtio:
- NULL ptr deref fix"
* tag 'drm-next-2021-11-12' of git://anongit.freedesktop.org/drm/drm: (126 commits)
drm/ttm: Double check mem_type of BO while eviction
drm/amdgpu: add missed support for UVD IP_VERSION(3, 0, 64)
drm/amdgpu: drop jpeg IP initialization in SRIOV case
drm/amd/display: reject both non-zero src_x and src_y only for DCN1x
drm/amd/display: Add callbacks for DMUB HPD IRQ notifications
drm/amd/display: Don't lock connection_mutex for DMUB HPD
drm/amd/display: Add comment where CONFIG_DRM_AMD_DC_DCN macro ends
drm/amdkfd: Fix retry fault drain race conditions
drm/amdkfd: lower the VAs base offset to 8KB
drm/amd/display: fix exit from amdgpu_dm_atomic_check() abruptly
drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov
drm/amdgpu: fix uvd crash on Polaris12 during driver unloading
drm/i915/adlp/fb: Prevent the mapping of redundant trailing padding NULL pages
drm/i915/fb: Fix rounding error in subsampled plane size calculation
drm/i915/hdmi: Turn DP++ TMDS output buffers back on in encoder->shutdown()
drm/locking: fix __stack_depot_* name conflict
drm/virtio: Fix NULL dereference error in virtio_gpu_poll
drm/amdgpu: fix SI handling in amdgpu_device_asic_has_dc_support()
drm/amdgpu: Fix dangling kfd_bo pointer for shared BOs
drm/amd/amdkfd: Don't sent command to HWS on kfd reset
...
Pull input updates from Dmitry Torokhov:
"Just one new driver (Cypress StreetFighter touchkey), and no input
core changes this time.
Plus various fixes and enhancements to existing drivers"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (54 commits)
Input: iforce - fix control-message timeout
Input: wacom_i2c - use macros for the bit masks
Input: ili210x - reduce sample period to 15ms
Input: ili210x - improve polled sample spacing
Input: ili210x - special case ili251x sample read out
Input: elantench - fix misreporting trackpoint coordinates
Input: synaptics-rmi4 - Fix device hierarchy
Input: i8042 - Add quirk for Fujitsu Lifebook T725
Input: cap11xx - add support for cap1206
Input: remove unused header <linux/input/cy8ctmg110_pdata.h>
Input: ili210x - add ili251x firmware update support
Input: ili210x - export ili251x version details via sysfs
Input: ili210x - use resolution from ili251x firmware
Input: pm8941-pwrkey - respect reboot_mode for warm reset
reboot: export symbol 'reboot_mode'
Input: max77693-haptic - drop unneeded MODULE_ALIAS
Input: cpcap-pwrbutton - do not set input parent explicitly
Input: max8925_onkey - don't mark comment as kernel-doc
Input: ads7846 - do not attempt IRQ workaround when deferring probe
Input: ads7846 - use input_set_capability()
...
Pull RTC updates from Alexandre Belloni:
"This includes new ioctls to get and set parameters and in particular
the backup switch mode that is needed for some RTCs to actually enable
the backup voltage (and have a useful RTC).
The same interface can also be used to get the actual features
supported by the RTC so userspace has a better way than trying and
failing.
Summary:
Subsystem:
- Add new ioctl to get and set extra RTC parameters, this includes
backup switch mode
- Expose available features to userspace, in particular, when alarmas
have a resolution of one minute instead of a second.
- Let the core handle those alarms with a minute resolution
New driver:
- MSTAR MSC313 RTC
Drivers:
- Add SPI ID table where necessary
- Add BSM support for rv3028, rv3032 and pcf8523
- s3c: set RTC range
- rx8025: set range, implement .set_offset and .read_offset"
* tag 'rtc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
rtc: rx8025: use .set_offset/.read_offset
rtc: rx8025: use rtc_add_group
rtc: rx8025: clear RTC_FEATURE_ALARM when alarm are not supported
rtc: rx8025: set range
rtc: rx8025: let the core handle the alarm resolution
rtc: rx8025: switch to devm_rtc_allocate_device
rtc: ab8500: let the core handle the alarm resolution
rtc: ab-eoz9: support UIE when available
rtc: ab-eoz9: use RTC_FEATURE_UPDATE_INTERRUPT
rtc: rv3032: let the core handle the alarm resolution
rtc: s35390a: let the core handle the alarm resolution
rtc: handle alarms with a minute resolution
rtc: pcf85063: silence cppcheck warning
rtc: rv8803: fix writing back ctrl in flag register
rtc: s3c: Add time range
rtc: s3c: Extract read/write IO into separate functions
rtc: s3c: Remove usage of devm_rtc_device_register()
rtc: tps80031: Remove driver
rtc: sun6i: Allow probing without an early clock provider
rtc: pcf8523: add BSM support
...
"maxItems" is not needed with an "items" list
Fixes:
$ DT_SCHEMA_FILES=Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml make dtbs_check
Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml: properties:clocks: {'required': ['maxItems']} is not allowed for {'minItems': 1, 'maxItems': 2, 'items': [{'description': 'High-frequency oscillator input, divided internally'}, {'description': 'Low-frequency oscillator input, only found on some variants'}]}
hint: "maxItems" is not needed with an "items" list
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
...
Signed-off-by: David Heidelberg <david@ixit.cz>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211029142443.68779-1-david@ixit.cz
make dt_binding_check:
Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml: ignoring, error in schema: properties: power-domain-names
warning: no schema found in file: Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml
Documentation/devicetree/bindings/media/qcom,sc7280-venus.yaml: properties:power-domain-names: {'required': ['maxItems']} is not allowed for {'minItems': 2, 'maxItems': 3, 'items': [{'const': 'venus'}, {'const': 'vcodec0'}, {'const': 'cx'}]}
hint: "maxItems" is not needed with an "items" list
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
Fixes: e48b839b66 ("media: dt-bindings: media: venus: Add sc7280 dt schema")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/d94924e1bd00f396f2106f04d4a2bb839cf5f071.1636453406.git.geert+renesas@glider.be
clock-frequency is only restricted by the upper limit of 400 kHz.
Found with:
$ DT_SCHEMA_FILES=Documentation/devicetree/bindings/i2c/i2c-imx.yaml make dtbs_check
...
arch/arm64/boot/dts/freescale/imx8mq-librem5-r2.dt.yaml: i2c@30a20000: clock-frequency:0:0: 387000 is not one of [100000, 400000]
From schema: linux/Documentation/devicetree/bindings/i2c/i2c-imx.yaml
...
Fixes: 4bdc443472 ("dt-bindings: i2c: Convert imx i2c to json-schema")
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20211029141134.66170-1-david@ixit.cz
Signed-off-by: Rob Herring <robh@kernel.org>
Pull more power management updates from Rafael Wysocki:
"These fix three intel_pstate driver regressions, fix locking in the
core code suspending and resuming devices during system PM
transitions, fix the handling of cpuidle drivers based on runtime PM
during system-wide suspend, fix two issues in the operating
performance points (OPP) framework and resource-managed helpers to it.
Specifics:
- Fix two intel_pstate driver regressions related to the HWP
interrupt handling added recently (Srinivas Pandruvada).
- Fix intel_pstate driver regression introduced during the 5.11 cycle
and causing HWP desired performance to be mishandled in some cases
when switching driver modes and during system suspend and shutdown
(Rafael Wysocki).
- Fix system-wide device suspend and resume locking to avoid
deadlocks when device objects are deleted during a system-wide PM
transition (Rafael Wysocki).
- Modify system-wide suspend of devices to prevent cpuidle drivers
based on runtime PM from misbehaving during the "no IRQ" phase of
it (Ulf Hansson).
- Fix return value of _opp_add_static_v2() helper (YueHaibing).
- Fix required-opp handle count (Pavankumar Kondeti).
- Add resource managed OPP helpers, update dev_pm_opp_attach_genpd(),
update their devfreq users, and make minor DT binding change
(Dmitry Osipenko)"
* tag 'pm-5.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: Avoid calling put_device() under dpm_list_mtx
cpufreq: intel_pstate: Clear HWP Status during HWP Interrupt enable
cpufreq: intel_pstate: Fix unchecked MSR 0x773 access
cpufreq: intel_pstate: Clear HWP desired on suspend/shutdown and offline
PM: sleep: Fix runtime PM based cpuidle support
dt-bindings: opp: Allow multi-worded OPP entry name
opp: Fix return in _opp_add_static_v2()
PM / devfreq: tegra30: Check whether clk_round_rate() returns zero rate
PM / devfreq: tegra30: Use resource-managed helpers
PM / devfreq: Add devm_devfreq_add_governor()
opp: Add more resource-managed variants of dev_pm_opp_of_add_table()
opp: Change type of dev_pm_opp_attach_genpd(names) argument
opp: Fix required-opps phandle array count check
Pull dmaengine updates from Vinod Koul:
"A bunch of driver updates, no new driver or controller support this
time though:
- Another pile of idxd updates
- pm routines cleanup for at_xdmac driver
- Correct handling of callback_result for few drivers
- zynqmp_dma driver updates and descriptor management refinement
- Hardware handshaking support for dw-axi-dmac
- Support for remotely powered controllers in Qcom bam dma
- tegra driver updates"
* tag 'dmaengine-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (69 commits)
dmaengine: ti: k3-udma: Set r/tchan or rflow to NULL if request fail
dmaengine: ti: k3-udma: Set bchan to NULL if a channel request fail
dmaengine: stm32-dma: avoid 64-bit division in stm32_dma_get_max_width
dmaengine: fsl-edma: support edma memcpy
dmaengine: idxd: fix resource leak on dmaengine driver disable
dmaengine: idxd: cleanup completion record allocation
dmaengine: zynqmp_dma: Correctly handle descriptor callbacks
dmaengine: xilinx_dma: Correctly handle cyclic descriptor callbacks
dmaengine: altera-msgdma: Correctly handle descriptor callbacks
dmaengine: at_xdmac: fix compilation warning
dmaengine: dw-axi-dmac: Simplify assignment in dma_chan_pause()
dmaengine: qcom: bam_dma: Add "powered remotely" mode
dt-bindings: dmaengine: bam_dma: Add "powered remotely" mode
dmaengine: sa11x0: Mark PM functions as __maybe_unused
dmaengine: switch from 'pci_' to 'dma_' API
dmaengine: ioat: switch from 'pci_' to 'dma_' API
dmaengine: hsu: switch from 'pci_' to 'dma_' API
dmaengine: hisi_dma: switch from 'pci_' to 'dma_' API
dmaengine: dw: switch from 'pci_' to 'dma_' API
dmaengine: dw-edma-pcie: switch from 'pci_' to 'dma_' API
...
Pull watchdog updates from Wim Van Sebroeck:
- f71808e_wdt: convert to watchdog framework
- db8500_wdt: Rename driver (was ux500_wdt.c)
- sunxi: Add compatibles for R329 and D1
- mtk: add disable_wdt_extrst support
- several other small fixes and improvements
* tag 'linux-watchdog-5.16-rc1' of git://www.linux-watchdog.org/linux-watchdog: (30 commits)
watchdog: db8500_wdt: Rename symbols
watchdog: db8500_wdt: Rename driver
watchdog: ux500_wdt: Drop platform data
watchdog: bcm63xx_wdt: fix fallthrough warning
watchdog: iTCO_wdt: No need to stop the timer in probe
watchdog: s3c2410: describe driver in KConfig
watchdog: sp5100_tco: Add support for get_timeleft
watchdog: mtk: add disable_wdt_extrst support
dt-bindings: watchdog: mtk-wdt: add disable_wdt_extrst support
watchdog: rza_wdt: Use semicolons instead of commas
watchdog: mlx-wdt: Use regmap_write_bits()
watchdog: rti-wdt: Make use of the helper function devm_platform_ioremap_resource()
watchdog: iTCO_wdt: Make use of the helper function devm_platform_ioremap_resource()
watchdog: ar7_wdt: Make use of the helper function devm_platform_ioremap_resource_byname()
watchdog: sunxi_wdt: Add support for D1
dt-bindings: watchdog: sunxi: Add compatibles for D1
ar7: fix kernel builds for compiler test
dt-bindings: watchdog: sunxi: Add compatibles for R329
watchdog: meson_gxbb_wdt: add timeout parameter
watchdog: meson_gxbb_wdt: add nowayout parameter
...
