Pull lsm updates from Paul Moore:
- Improved handling of LSM "secctx" strings through lsm_context struct
The LSM secctx string interface is from an older time when only one
LSM was supported, migrate over to the lsm_context struct to better
support the different LSMs we now have and make it easier to support
new LSMs in the future.
These changes explain the Rust, VFS, and networking changes in the
diffstat.
- Only build lsm_audit.c if CONFIG_SECURITY and CONFIG_AUDIT are
enabled
Small tweak to be a bit smarter about when we build the LSM's common
audit helpers.
- Check for absurdly large policies from userspace in SafeSetID
SafeSetID policies rules are fairly small, basically just "UID:UID",
it easy to impose a limit of KMALLOC_MAX_SIZE on policy writes which
helps quiet a number of syzbot related issues. While work is being
done to address the syzbot issues through other mechanisms, this is a
trivial and relatively safe fix that we can do now.
- Various minor improvements and cleanups
A collection of improvements to the kernel selftests, constification
of some function parameters, removing redundant assignments, and
local variable renames to improve readability.
* tag 'lsm-pr-20250121' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lockdown: initialize local array before use to quiet static analysis
safesetid: check size of policy writes
net: corrections for security_secid_to_secctx returns
lsm: rename variable to avoid shadowing
lsm: constify function parameters
security: remove redundant assignment to return variable
lsm: Only build lsm_audit.c if CONFIG_SECURITY and CONFIG_AUDIT are set
selftests: refactor the lsm `flags_overset_lsm_set_self_attr` test
binder: initialize lsm_context structure
rust: replace lsm context+len with lsm_context
lsm: secctx provider check on release
lsm: lsm_context in security_dentry_init_security
lsm: use lsm_context in security_inode_getsecctx
lsm: replace context+len with lsm_context
lsm: ensure the correct LSM context releaser
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Finish the move to custom FFI integer types started in the previous
cycle and finally map 'long' to 'isize' and 'char' to 'u8'. Do a
few cleanups on top thanks to that.
- Start to use 'derive(CoercePointee)' on Rust >= 1.84.0.
This is a major milestone on the path to build the kernel using
only stable Rust features. In particular, previously we were using
the unstable features 'coerce_unsized', 'dispatch_from_dyn' and
'unsize', and now we will use the new 'derive_coerce_pointee' one,
which is on track to stabilization. This new feature is a macro
that essentially expands into code that internally uses the
unstable features that we were using before, without having to
expose those.
With it, stable Rust users, including the kernel, will be able to
build custom smart pointers that work with trait objects, e.g.:
fn f(p: &Arc<dyn Display>) {
pr_info!("{p}\n");
}
let a: Arc<dyn Display> = Arc::new(42i32, GFP_KERNEL)?;
let b: Arc<dyn Display> = Arc::new("hello there", GFP_KERNEL)?;
f(&a); // Prints "42".
f(&b); // Prints "hello there".
Together with the 'arbitrary_self_types' feature that we started
using in the previous cycle, using our custom smart pointers like
'Arc' will eventually only rely in stable Rust.
- Introduce 'PROCMACROLDFLAGS' environment variable to allow to link
Rust proc macros using different flags than those used for linking
Rust host programs (e.g. when 'rustc' uses a different C library
than the host programs' one), which Android needs.
- Help kernel builds under macOS with Rust enabled by accomodating
other naming conventions for dynamic libraries (i.e. '.so' vs.
'.dylib') which are used for Rust procedural macros. The actual
support for macOS (i.e. the rest of the pieces needed) is provided
out-of-tree by others, following the policy used for other parts of
the kernel by Kbuild.
- Run Clippy for 'rusttest' code too and clean the bits it spotted.
- Provide Clippy with the minimum supported Rust version to improve
the suggestions it gives.
- Document 'bindgen' 0.71.0 regression.
'kernel' crate:
- 'build_error!': move users of the hidden function to the documented
macro, prevent such uses in the future by moving the function
elsewhere and add the macro to the prelude.
- 'types' module: add improved version of 'ForeignOwnable::borrow_mut'
(which was removed in the past since it was problematic); change
'ForeignOwnable' pointer type to '*mut'.
- 'alloc' module: implement 'Display' for 'Box' and align the 'Debug'
implementation to it; add example (doctest) for 'ArrayLayout::new()'
- 'sync' module: document 'PhantomData' in 'Arc'; use
'NonNull::new_unchecked' in 'ForeignOwnable for Arc' impl.
- 'uaccess' module: accept 'Vec's with different allocators in
'UserSliceReader::read_all'.
- 'workqueue' module: enable run-testing a couple more doctests.
- 'error' module: simplify 'from_errno()'.
- 'block' module: fix formatting in code documentation (a lint to catch
these is being implemented).
- Avoid 'unwrap()'s in doctests, which also improves the examples by
showing how kernel code is supposed to be written.
- Avoid 'as' casts with 'cast{,_mut}' calls which are a bit safer.
And a few other cleanups"
* tag 'rust-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (32 commits)
kbuild: rust: add PROCMACROLDFLAGS
rust: uaccess: generalize userSliceReader to support any Vec
rust: kernel: add improved version of `ForeignOwnable::borrow_mut`
rust: kernel: reorder `ForeignOwnable` items
rust: kernel: change `ForeignOwnable` pointer to mut
rust: arc: split unsafe block, add missing comment
rust: types: avoid `as` casts
rust: arc: use `NonNull::new_unchecked`
rust: use derive(CoercePointee) on rustc >= 1.84.0
rust: alloc: add doctest for `ArrayLayout::new()`
rust: init: update `stack_try_pin_init` examples
rust: error: import `kernel`'s `LayoutError` instead of `core`'s
rust: str: replace unwraps with question mark operators
rust: page: remove unnecessary helper function from doctest
rust: rbtree: remove unwrap in asserts
rust: init: replace unwraps with question mark operators
rust: use host dylib naming convention to support macOS
rust: add `build_error!` to the prelude
rust: kernel: move `build_error` hidden function to prevent mistakes
rust: use the `build_error!` macro, not the hidden function
...
Pull locking updates from Ingo Molnar:
"Lockdep:
- Improve and fix lockdep bitsize limits, clarify the Kconfig
documentation (Carlos Llamas)
- Fix lockdep build warning on Clang related to
chain_hlock_class_idx() inlining (Andy Shevchenko)
- Relax the requirements of PROVE_RAW_LOCK_NESTING arch support by
not tying it to ARCH_SUPPORTS_RT unnecessarily (Waiman Long)
Rust integration:
- Support lock pointers managed by the C side (Lyude Paul)
- Support guard types (Lyude Paul)
- Update MAINTAINERS file filters to include the Rust locking code
(Boqun Feng)
Wake-queues:
- Add raw_spin_*wake() helpers to simplify locking code (John Stultz)
SMP cross-calls:
- Fix potential data update race by evaluating the local cond_func()
before IPI side-effects (Mathieu Desnoyers)
Guard primitives:
- Ease [c]tags based searches by including the cleanup/guard type
primitives (Peter Zijlstra)
ww_mutexes:
- Simplify the ww_mutex self-test code via swap() (Thorsten Blum)
Static calls:
- Update the static calls MAINTAINERS file-pattern (Jiri Slaby)"
* tag 'locking-core-2025-01-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Add static_call_inline.c to STATIC BRANCH/CALL
cleanup, tags: Create tags for the cleanup primitives
sched/wake_q: Add helper to call wake_up_q after unlock with preemption disabled
rust: sync: Add lock::Backend::assert_is_held()
rust: sync: Add SpinLockGuard type alias
rust: sync: Add MutexGuard type alias
rust: sync: Make Guard::new() public
rust: sync: Add Lock::from_raw() for Lock<(), B>
locking: MAINTAINERS: Start watching Rust locking primitives
lockdep: Move lockdep_assert_locked() under #ifdef CONFIG_PROVE_LOCKING
lockdep: Mark chain_hlock_class_idx() with __maybe_unused
lockdep: Document MAX_LOCKDEP_CHAIN_HLOCKS calculation
lockdep: Clarify size for LOCKDEP_*_BITS configs
lockdep: Fix upper limit for LOCKDEP_*_BITS configs
locking/ww_mutex/test: Use swap() macro
smp/scf: Evaluate local cond_func() before IPI side-effects
locking/lockdep: Enforce PROVE_RAW_LOCK_NESTING only if ARCH_SUPPORTS_RT
Pull block updates from Jens Axboe:
- NVMe pull requests via Keith:
- Target support for PCI-Endpoint transport (Damien)
- TCP IO queue spreading fixes (Sagi, Chaitanya)
- Target handling for "limited retry" flags (Guixen)
- Poll type fix (Yongsoo)
- Xarray storage error handling (Keisuke)
- Host memory buffer free size fix on error (Francis)
- MD pull requests via Song:
- Reintroduce md-linear (Yu Kuai)
- md-bitmap refactor and fix (Yu Kuai)
- Replace kmap_atomic with kmap_local_page (David Reaver)
- Quite a few queue freeze and debugfs deadlock fixes
Ming introduced lockdep support for this in the 6.13 kernel, and it
has (unsurprisingly) uncovered quite a few issues
- Use const attributes for IO schedulers
- Remove bio ioprio wrappers
- Fixes for stacked device atomic write support
- Refactor queue affinity helpers, in preparation for better supporting
isolated CPUs
- Cleanups of loop O_DIRECT handling
- Cleanup of BLK_MQ_F_* flags
- Add rotational support for null_blk
- Various fixes and cleanups
* tag 'for-6.14/block-20250118' of git://git.kernel.dk/linux: (106 commits)
block: Don't trim an atomic write
block: Add common atomic writes enable flag
md/md-linear: Fix a NULL vs IS_ERR() bug in linear_add()
block: limit disk max sectors to (LLONG_MAX >> 9)
block: Change blk_stack_atomic_writes_limits() unit_min check
block: Ensure start sector is aligned for stacking atomic writes
blk-mq: Move more error handling into blk_mq_submit_bio()
block: Reorder the request allocation code in blk_mq_submit_bio()
nvme: fix bogus kzalloc() return check in nvme_init_effects_log()
md/md-bitmap: move bitmap_{start, end}write to md upper layer
md/raid5: implement pers->bitmap_sector()
md: add a new callback pers->bitmap_sector()
md/md-bitmap: remove the last parameter for bimtap_ops->endwrite()
md/md-bitmap: factor behind write counters out from bitmap_{start/end}write()
md: Replace deprecated kmap_atomic() with kmap_local_page()
md: reintroduce md-linear
partitions: ldm: remove the initial kernel-doc notation
blk-cgroup: rwstat: fix kernel-doc warnings in header file
blk-cgroup: fix kernel-doc warnings in header file
nbd: fix partial sending
...
Previously, the `ForeignOwnable` trait had a method called `borrow_mut`
that was intended to provide mutable access to the inner value. However,
the method accidentally made it possible to change the address of the
object being modified, which usually isn't what we want. (And when we
want that, it can be done by calling `from_foreign` and `into_foreign`,
like how the old `borrow_mut` was implemented.)
In this patch, we introduce an alternate definition of `borrow_mut` that
solves the previous problem. Conceptually, given a pointer type `P` that
implements `ForeignOwnable`, the `borrow_mut` method gives you the same
kind of access as an `&mut P` would, except that it does not let you
change the pointer `P` itself.
This is analogous to how the existing `borrow` method provides the same
kind of access to the inner value as an `&P`.
Note that for types like `Arc`, having an `&mut Arc<T>` only gives you
immutable access to the inner `T`. This is because mutable references
assume exclusive access, but there might be other handles to the same
reference counted value, so the access isn't exclusive. The `Arc` type
implements this by making `borrow_mut` return the same type as `borrow`.
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20241120-borrow-mut-v6-6-80dbadd00951@gmail.com
[ Updated to `crate::ffi::`. Reworded title slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The `kernel` crate relies on both `coerce_unsized` and `dispatch_from_dyn`
unstable features.
Alice Ryhl has proposed [1] the introduction of the unstable macro
`SmartPointer` to reduce such dependence, along with a RFC patch [2].
Since Rust 1.81.0 this macro, later renamed to `CoercePointee` in
Rust 1.84.0 [3], has been fully implemented with the naming discussion
resolved.
This feature is now on track to stabilization in the language.
In order to do so, we shall start using this macro in the `kernel` crate
to prove the functionality and utility of the macro as the justification
of its stabilization.
This patch makes this switch in such a way that the crate remains
backward compatible with older Rust compiler versions,
via the new Kconfig option `RUSTC_HAS_COERCE_POINTEE`.
A minimal demonstration example is added to the
`samples/rust/rust_print_main.rs` module.
Link: https://rust-lang.github.io/rfcs/3621-derive-smart-pointer.html [1]
Link: https://lore.kernel.org/all/20240823-derive-smart-pointer-v1-1-53769cd37239@google.com/ [2]
Link: https://github.com/rust-lang/rust/pull/131284 [3]
Signed-off-by: Xiangfei Ding <dingxiangfei2009@gmail.com>
Reviewed-by: Fiona Behrens <me@kloenk.dev>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241203205050.679106-2-dingxiangfei2009@gmail.com
[ Fixed version to 1.84. Renamed option to `RUSTC_HAS_COERCE_POINTEE`
to match `CC_HAS_*` ones. Moved up new config option, closer to the
`CC_HAS_*` ones. Simplified Kconfig line. Fixed typos and slightly
reworded example and commit. Added Link to PR. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Remove `unwrap` in asserts and replace it with `Option::Some`
matching. By doing it this way, the examples are more
descriptive, so it disambiguates the return type of
the `get(...)` and `next(...)`, because the `unwrap(...)`
can also be called on `Result`.
Signed-off-by: Daniel Sedlak <daniel@sedlak.dev>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241123095033.41240-3-daniel@sedlak.dev
[ Reworded title slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The sibling `build_assert!` is already in the prelude, it makes sense
that a "core"/"language" facility like this is part of the prelude and
users should not be defining their own one (thus there should be no risk
of future name collisions and we would want to be aware of them anyway).
Thus add `build_error!` into the prelude.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241123222849.350287-3-ojeda@kernel.org
[ Applied the change to the new miscdevice cases. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Users were using the hidden exported `kernel::build_error` function
instead of the intended `kernel::build_error!` macro, e.g. see the
previous commit.
To force to use the macro, move it into the `build_assert` module,
thus making it a compilation error and avoiding a collision in the same
"namespace". Using the function now would require typing the module name
(which is hidden), not just a single character.
Now attempting to use the function will trigger this error with the
right suggestion by the compiler:
error[E0423]: expected function, found macro `kernel::build_error`
--> samples/rust/rust_minimal.rs:29:9
|
29 | kernel::build_error();
| ^^^^^^^^^^^^^^^^^^^ not a function
|
help: use `!` to invoke the macro
|
29 | kernel::build_error!();
| +
An alternative would be using an alias, but it would be more complex
and moving it into the module seems right since it belongs there and
reduces the amount of code at the crate root.
Keep the `#[doc(hidden)]` inside `build_assert` in case the module is
not hidden in the future.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241123222849.350287-2-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Running Clippy for `rusttest` code is useful to catch issues there too,
even if the code is not as critical. In the future, this code may also
run in kernelspace and could be copy-pasted. Thus it is useful to keep
it under the same standards. For instance, it will now make us add
`// SAFETY` comments.
It also makes everything more consistent.
Thus clean the few issues spotted by Clippy and start running it.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20241123180639.260191-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Pull workqueue fixes from Tejun Heo:
- Suppress a corner case spurious flush dependency warning
- Two trivial changes
* tag 'wq-for-6.13-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: add printf attribute to __alloc_workqueue()
workqueue: Do not warn when cancelling WQ_MEM_RECLAIM work from !WQ_MEM_RECLAIM worker
rust: add safety comment in workqueue traits
Since we've exposed Lock::from_raw() and Guard::new() publically, we
want to be able to make sure that we assert that a lock is actually held
when constructing a Guard for it to handle instances of unsafe
Guard::new() calls outside of our lock module.
Hence add a new method assert_is_held() to Backend, which uses lockdep
to check whether or not a lock has been acquired. When lockdep is
disabled, this has no overhead.
[Boqun: Resolve the conflicts with exposing Guard::new(), reword the
commit log a bit and format "unsafe { <statement>; }" into "unsafe {
<statement> }" for the consistency. ]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20241125204139.656801-1-lyude@redhat.com
Since we added a `Lock::from_raw()` function previously, it makes sense
to also introduce an interface for creating a `Guard` from a reference
to a `Lock` for instances where we've derived the `Lock` from a raw
pointer and know that the lock is already acquired, there are such
usages in KMS API.
[Boqun: Add backquotes to type names, reformat the commit log, reword a
bit on the usage of KMS API]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Filipe Xavier <felipe_life@live.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20241119231146.2298971-3-lyude@redhat.com
The KMS bindings [1] have a few bindings that require manually acquiring
specific locks before calling certain functions. At the moment though,
the only way of acquiring these locks in bindings is to simply call the
C locking functions directly - since said locks are not initialized on
the Rust side of things.
However - if we add `#[repr(C)]` to `Lock<(), B>`, then given `()` is a
ZST - `Lock<(), B>` becomes equivalent in data layout to its inner
`B::State` type. Since locks in C don't have data explicitly associated
with them anyway, we can take advantage of this to add a
`Lock::from_raw()` function that can translate a raw pointer to
`B::State` into its proper `Lock<(), B>` equivalent. This lets us simply
acquire a reference to the lock in question and work with it like it was
initialized on the Rust side of things, allowing us to use less unsafe
code to implement bindings with lock requirements.
[Boqun: Use "Link:" instead of a URL and format the commit log]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patchwork.freedesktop.org/series/131522/ [1]
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20241119231146.2298971-2-lyude@redhat.com
Having the Rust doctests enabled these workqueue tests are built but not
executed as the final callers of the print_*() functions are missing.
Add them.
The result is
# rust_doctest_kernel_workqueue_rs_0.location: rust/kernel/workqueue.rs:35
rust_doctests_kernel: The value is: 42
ok 94 rust_doctest_kernel_workqueue_rs_0
# rust_doctest_kernel_workqueue_rs_3.location: rust/kernel/workqueue.rs:78
rust_doctests_kernel: The value is: 24
rust_doctests_kernel: The second value is: 42
ok 97 rust_doctest_kernel_workqueue_rs_3
Without this change the "The value ..." outputs are not there meaning
that this test code is not run.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/cb953202-0dbe-4127-8a8e-6a75258c2116@gmail.com
[ Reworded slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
With `long` mapped to `isize`, `size_t`/`__kernel_size_t` mapped to
`usize` and `char` mapped to `u8`, many of the existing casts are no
longer necessary.
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240913213041.395655-6-gary@garyguo.net
[ Moved `uaccess` changes to the previous commit, since they were
irrefutable patterns that Rust >= 1.82.0 warns about. Removed a
couple casts that now use `c""` literals. Rebased on top of
`rust-next`. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The following FFI types are replaced compared to `core::ffi`:
1. `char` type is now always mapped to `u8`, since kernel uses
`-funsigned-char` on the C code. `core::ffi` maps it to platform
default ABI, which can be either signed or unsigned.
2. `long` is now always mapped to `isize`. It's very common in the
kernel to use `long` to represent a pointer-sized integer, and in
fact `intptr_t` is a typedef of `long` in the kernel. Enforce this
mapping rather than mapping to `i32/i64` depending on platform can
save us a lot of unnecessary casts.
Signed-off-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240913213041.395655-5-gary@garyguo.net
[ Moved `uaccess` changes from the next commit, since they were
irrefutable patterns that Rust >= 1.82.0 warns about. Reworded
slightly and reformatted a few documentation comments. Rebased on
top of `rust-next`. Added the removal of two casts to avoid Clippy
warnings. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Pull more block updates from Jens Axboe:
- NVMe pull request via Keith:
- Use correct srcu list traversal (Breno)
- Scatter-gather support for metadata (Keith)
- Fabrics shutdown race condition fix (Nilay)
- Persistent reservations updates (Guixin)
- Add the required bits for MD atomic write support for raid0/1/10
- Correct return value for unknown opcode in ublk
- Fix deadlock with zone revalidation
- Fix for the io priority request vs bio cleanups
- Use the correct unsigned int type for various limit helpers
- Fix for a race in loop
- Cleanup blk_rq_prep_clone() to prevent uninit-value warning and make
it easier for actual humans to read
- Fix potential UAF when iterating tags
- A few fixes for bfq-iosched UAF issues
- Fix for brd discard not decrementing the allocated page count
- Various little fixes and cleanups
* tag 'block-6.13-20242901' of git://git.kernel.dk/linux: (36 commits)
brd: decrease the number of allocated pages which discarded
block, bfq: fix bfqq uaf in bfq_limit_depth()
block: Don't allow an atomic write be truncated in blkdev_write_iter()
mq-deadline: don't call req_get_ioprio from the I/O completion handler
block: Prevent potential deadlock in blk_revalidate_disk_zones()
block: Remove extra part pointer NULLify in blk_rq_init()
nvme: tuning pr code by using defined structs and macros
nvme: introduce change ptpl and iekey definition
block: return bool from get_disk_ro and bdev_read_only
block: remove a duplicate definition for bdev_read_only
block: return bool from blk_rq_aligned
block: return unsigned int from blk_lim_dma_alignment_and_pad
block: return unsigned int from queue_dma_alignment
block: return unsigned int from bdev_io_opt
block: req->bio is always set in the merge code
block: don't bother checking the data direction for merges
block: blk-mq: fix uninit-value in blk_rq_prep_clone and refactor
Revert "block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()"
md/raid10: Atomic write support
md/raid1: Atomic write support
...
Pull char/misc/IIO/whatever driver subsystem updates from Greg KH:
"Here is the 'big and hairy' char/misc/iio and other small driver
subsystem updates for 6.13-rc1.
Loads of things in here, and even a fun merge conflict!
- rust misc driver bindings and other rust changes to make misc
drivers actually possible.
I think this is the tipping point, expect to see way more rust
drivers going forward now that these bindings are present. Next
merge window hopefully we will have pci and platform drivers
working, which will fully enable almost all driver subsystems to
start accepting (or at least getting) rust drivers.
This is the end result of a lot of work from a lot of people,
congrats to all of them for getting this far, you've proved many of
us wrong in the best way possible, working code :)
- IIO driver updates, too many to list individually, that subsystem
keeps growing and growing...
- Interconnect driver updates
- nvmem driver updates
- pwm driver updates
- platform_driver::remove() fixups, loads of them
- counter driver updates
- misc driver updates (keba?)
- binder driver updates and fixes
- loads of other small char/misc/etc driver updates and additions,
full details in the shortlog.
All of these have been in linux-next for a while, with no other
reported issues other than that merge conflict"
* tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (401 commits)
mei: vsc: Fix typo "maintstepping" -> "mainstepping"
firmware: Switch back to struct platform_driver::remove()
misc: isl29020: Fix the wrong format specifier
scripts/tags.sh: Don't tag usages of DEFINE_MUTEX
fpga: Switch back to struct platform_driver::remove()
mei: vsc: Improve error logging in vsc_identify_silicon()
mei: vsc: Do not re-enable interrupt from vsc_tp_reset()
dt-bindings: spmi: qcom,x1e80100-spmi-pmic-arb: Add SAR2130P compatible
dt-bindings: spmi: spmi-mtk-pmif: Add compatible for MT8188
spmi: pmic-arb: fix return path in for_each_available_child_of_node()
iio: Move __private marking before struct element priv in struct iio_dev
docs: iio: ad7380: add adaq4370-4 and adaq4380-4
iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4
iio: adc: ad7380: use local dev variable to shorten long lines
iio: adc: ad7380: fix oversampling formula
dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
bus: mhi: host: pci_generic: Use pcim_iomap_region() to request and map MHI BAR
bus: mhi: host: Switch trace_mhi_gen_tre fields to native endian
misc: atmel-ssc: Use of_property_present() for non-boolean properties
misc: keba: Add hardware dependency
...
When I merged the rust 'use' imports, I didn't realize that there's
an offical preferred idiomatic format - so while it all worked fine,
it doesn't match what 'make rustfmt' wants to make it.
Fix it up appropriately.
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Enable a series of lints, including safety-related ones, e.g. the
compiler will now warn about missing safety comments, as well as
unnecessary ones. How safety documentation is organized is a
frequent source of review comments, thus having the compiler guide
new developers on where they are expected (and where not) is very
nice.
- Start using '#[expect]': an interesting feature in Rust (stabilized
in 1.81.0) that makes the compiler warn if an expected warning was
_not_ emitted. This is useful to avoid forgetting cleaning up
locally ignored diagnostics ('#[allow]'s).
- Introduce '.clippy.toml' configuration file for Clippy, the Rust
linter, which will allow us to tweak its behaviour. For instance,
our first use cases are declaring a disallowed macro and, more
importantly, enabling the checking of private items.
- Lints-related fixes and cleanups related to the items above.
- Migrate from 'receiver_trait' to 'arbitrary_self_types': to get the
kernel into stable Rust, one of the major pieces of the puzzle is
the support to write custom types that can be used as 'self', i.e.
as receivers, since the kernel needs to write types such as 'Arc'
that common userspace Rust would not. 'arbitrary_self_types' has
been accepted to become stable, and this is one of the steps
required to get there.
- Remove usage of the 'new_uninit' unstable feature.
- Use custom C FFI types. Includes a new 'ffi' crate to contain our
custom mapping, instead of using the standard library 'core::ffi'
one. The actual remapping will be introduced in a later cycle.
- Map '__kernel_{size_t,ssize_t,ptrdiff_t}' to 'usize'/'isize'
instead of 32/64-bit integers.
- Fix 'size_t' in bindgen generated prototypes of C builtins.
- Warn on bindgen < 0.69.5 and libclang >= 19.1 due to a double issue
in the projects, which we managed to trigger with the upcoming
tracepoint support. It includes a build test since some
distributions backported the fix (e.g. Debian -- thanks!). All
major distributions we list should be now OK except Ubuntu non-LTS.
'macros' crate:
- Adapt the build system to be able run the doctests there too; and
clean up and enable the corresponding doctests.
'kernel' crate:
- Add 'alloc' module with generic kernel allocator support and remove
the dependency on the Rust standard library 'alloc' and the
extension traits we used to provide fallible methods with flags.
Add the 'Allocator' trait and its implementations '{K,V,KV}malloc'.
Add the 'Box' type (a heap allocation for a single value of type
'T' that is also generic over an allocator and considers the
kernel's GFP flags) and its shorthand aliases '{K,V,KV}Box'. Add
'ArrayLayout' type. Add 'Vec' (a contiguous growable array type)
and its shorthand aliases '{K,V,KV}Vec', including iterator
support.
For instance, now we may write code such as:
let mut v = KVec::new();
v.push(1, GFP_KERNEL)?;
assert_eq!(&v, &[1]);
Treewide, move as well old users to these new types.
- 'sync' module: add global lock support, including the
'GlobalLockBackend' trait; the 'Global{Lock,Guard,LockedBy}' types
and the 'global_lock!' macro. Add the 'Lock::try_lock' method.
- 'error' module: optimize 'Error' type to use 'NonZeroI32' and make
conversion functions public.
- 'page' module: add 'page_align' function.
- Add 'transmute' module with the existing 'FromBytes' and 'AsBytes'
traits.
- 'block::mq::request' module: improve rendered documentation.
- 'types' module: extend 'Opaque' type documentation and add simple
examples for the 'Either' types.
drm/panic:
- Clean up a series of Clippy warnings.
Documentation:
- Add coding guidelines for lints and the '#[expect]' feature.
- Add Ubuntu to the list of distributions in the Quick Start guide.
MAINTAINERS:
- Add Danilo Krummrich as maintainer of the new 'alloc' module.
And a few other small cleanups and fixes"
* tag 'rust-6.13' of https://github.com/Rust-for-Linux/linux: (82 commits)
rust: alloc: Fix `ArrayLayout` allocations
docs: rust: remove spurious item in `expect` list
rust: allow `clippy::needless_lifetimes`
rust: warn on bindgen < 0.69.5 and libclang >= 19.1
rust: use custom FFI integer types
rust: map `__kernel_size_t` and friends also to usize/isize
rust: fix size_t in bindgen prototypes of C builtins
rust: sync: add global lock support
rust: macros: enable the rest of the tests
rust: macros: enable paste! use from macro_rules!
rust: enable macros::module! tests
rust: kbuild: expand rusttest target for macros
rust: types: extend `Opaque` documentation
rust: block: fix formatting of `kernel::block::mq::request` module
rust: macros: fix documentation of the paste! macro
rust: kernel: fix THIS_MODULE header path in ThisModule doc comment
rust: page: add Rust version of PAGE_ALIGN
rust: helpers: remove unnecessary header includes
rust: exports: improve grammar in commentary
drm/panic: allow verbose version check
...
Pull pid_namespace rust bindings from Christian Brauner:
"This contains my Rust bindings for pid namespaces needed for various
rust drivers. Here's a description of the basic C semantics and how
they are mapped to Rust.
The pid namespace of a task doesn't ever change once the task is
alive. A unshare(CLONE_NEWPID) or setns(fd_pidns/pidfd, CLONE_NEWPID)
will not have an effect on the calling task's pid namespace. It will
only effect the pid namespace of children created by the calling task.
This invariant guarantees that after having acquired a reference to a
task's pid namespace it will remain unchanged.
When a task has exited and been reaped release_task() will be called.
This will set the pid namespace of the task to NULL. So retrieving the
pid namespace of a task that is dead will return NULL. Note, that
neither holding the RCU lock nor holding a reference count to the task
will prevent release_task() from being called.
In order to retrieve the pid namespace of a task the
task_active_pid_ns() function can be used. There are two cases to
consider:
(1) retrieving the pid namespace of the current task
(2) retrieving the pid namespace of a non-current task
From system call context retrieving the pid namespace for case (1) is
always safe and requires neither RCU locking nor a reference count to
be held. Retrieving the pid namespace after release_task() for current
will return NULL but no codepath like that is exposed to Rust.
Retrieving the pid namespace from system call context for (2) requires
RCU protection. Accessing a pid namespace outside of RCU protection
requires a reference count that must've been acquired while holding
the RCU lock. Note that accessing a non-current task means NULL can be
returned as the non-current task could have already passed through
release_task().
To retrieve (1) the current_pid_ns!() macro should be used. It ensures
that the returned pid namespace cannot outlive the calling scope. The
associated current_pid_ns() function should not be called directly as
it could be abused to created an unbounded lifetime for the pid
namespace. The current_pid_ns!() macro allows Rust to handle the
common case of accessing current's pid namespace without RCU
protection and without having to acquire a reference count.
For (2) the task_get_pid_ns() method must be used. This will always
acquire a reference on the pid namespace and will return an Option to
force the caller to explicitly handle the case where pid namespace is
None. Something that tends to be forgotten when doing the equivalent
operation in C.
Missing RCU primitives make it difficult to perform operations that
are otherwise safe without holding a reference count as long as RCU
protection is guaranteed. But it is not important currently. But we do
want it in the future.
Note that for (2) the required RCU protection around calling
task_active_pid_ns() synchronizes against putting the last reference
of the associated struct pid of task->thread_pid. The struct pid
stored in that field is used to retrieve the pid namespace of the
caller. When release_task() is called task->thread_pid will be NULLed
and put_pid() on said struct pid will be delayed in free_pid() via
call_rcu() allowing everyone with an RCU protected access to the
struct pid acquired from task->thread_pid to finish"
* tag 'vfs-6.13.rust.pid_namespace' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
rust: add PidNamespace
Pull rust trace event support from Steven Rostedt:
"Allow Rust code to have trace events
Trace events is a popular way to debug what is happening inside the
kernel or just to find out what is happening. Rust code is being added
to the Linux kernel but it currently does not support the tracing
infrastructure. Add support of trace events inside Rust code"
* tag 'trace-rust-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rust: jump_label: skip formatting generated file
jump_label: rust: pass a mut ptr to `static_key_count`
samples: rust: fix `rust_print` build making it a combined module
rust: add arch_static_branch
jump_label: adjust inline asm to be consistent
rust: samples: add tracepoint to Rust sample
rust: add tracepoint support
rust: add static_branch_unlikely for static_key_false
Pull networking updates from Paolo Abeni:
"The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core:
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of
rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infrastructure is guarded by the
CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code:
- Add small file operations for debugfs, to reduce the struct ops
size.
- Refactoring and optimization for the implementation of page_frag
API, This is a preparatory work to consolidate the page_frag
implementation.
Netfilter:
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users the
option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent CI
improvements.
BPF:
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols:
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after
close, the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state
lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per
device neigh lists.
Driver API:
- Introduce a unified interface to configure transmission H/W
shaping, and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling:
- forwarding: introduce deferred commands, to simplify the cleanup
phase
Drivers:
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- add support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Add representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- add support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implement page pool support
- macsec:
- inherit lower device's features and TSO limits when
offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- add dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- add clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature"
* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
mm: page_frag: fix a compile error when kernel is not compiled
Documentation: tipc: fix formatting issue in tipc.rst
selftests: nic_performance: Add selftest for performance of NIC driver
selftests: nic_link_layer: Add selftest case for speed and duplex states
selftests: nic_link_layer: Add link layer selftest for NIC driver
bnxt_en: Add FW trace coredump segments to the coredump
bnxt_en: Add a new ethtool -W dump flag
bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
bnxt_en: Add functions to copy host context memory
bnxt_en: Do not free FW log context memory
bnxt_en: Manage the FW trace context memory
bnxt_en: Allocate backing store memory for FW trace logs
bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
bnxt_en: Refactor bnxt_free_ctx_mem()
bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
bnxt_en: Update firmware interface spec to 1.10.3.85
selftests/bpf: Add some tests with sockmap SK_PASS
bpf: fix recursive lock when verdict program return SK_PASS
wireguard: device: support big tcp GSO
wireguard: selftests: load nf_conntrack if not present
...
