The check that beacon primary channel is in the range of 80 MHz
(abs < 80) is invalid for 320 MHz since duplicate beacon transmit
means that the AP transmits it on all the 20 MHz sub-channels:
9.4.2.249 HE Operation element - ... AP transmits Beacon frames in
non-HT duplicate PPDU with a TXVECTOR parameter CH_BANDWIDTH value
that is up to the BSS bandwidth.
So in case of 320 MHz the DUP beacon can be in upper 160 for primary
channel in the lower 160 giving possibly an absolute range of over
80 MHz.
Also this check is redundant alltogether, if AP has a wrong primary
channel in the beacon it's a faulty AP, and we would fail in next
steps to connect.
While at it, fix the frequency comparison to no longer compare
between KHz and MHz, which was introduced by commit 7f599aeccb
("cfg80211: Use the HE operation IE to determine a 6GHz BSS channel").
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230301115906.314faf725255.I5e27251ac558297553b590d3917a7b6d1aae0e74@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently in case DUP bit is not set we don't return the primary
channel for 6 GHz Band, but the spec says that the DUP bit has
no effect on this field:
9.4.2.249 HE Operation element:
The Duplicate Beacon subfield is set to 1 if the AP transmits
Beacon frames in non-HT duplicate PPDU with a TXVECTOR parameter
CH_BANDWIDTH value that is up to the BSS bandwidth and is set to
0 otherwise.
So remove the condition for returning primary channel based on DUP.
Since the caller code already marks the signal as invalid in case
the indicated frequency is not the tuned frequency, there's no need
to additionally handle this case here since that's already true for
duplicated beacons on the non-primary channel(s).
Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230301115906.66d7f05f7d11.I5e0add054f72ede95611391b99804c61c40cc959@changeid
[clarify commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To support hardware miss to tc action in actions on the flower
classifier, implement the required getting of filter actions,
and setup filter exts (actions) miss by giving it the filter's
handle and actions.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To support miss to action during hardware offload the filter's
handle is needed when setting up the actions (tcf_exts_init()),
and before offloading.
Move filter handle initialization earlier.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For drivers to support partial offload of a filter's action list,
add support for action miss to specify an action instance to
continue from in sw.
CT action in particular can't be fully offloaded, as new connections
need to be handled in software. This imposes other limitations on
the actions that can be offloaded together with the CT action, such
as packet modifications.
Assign each action on a filter's action list a unique miss_cookie
which drivers can then use to fill action_miss part of the tc skb
extension. On getting back this miss_cookie, find the action
instance with relevant cookie and continue classifying from there.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
struct tc_action->act_cookie is a user defined cookie,
and the related struct flow_action_entry->act_cookie is
used as an handle similar to struct flow_cls_offload->cookie.
Rename tc_action->act_cookie to user_cookie, and
flow_action_entry->act_cookie to cookie so their names
would better fit their usage.
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stefan Schmidt says:
====================
pull-request: ieee802154-next 2023-02-20
Miquel Raynal build upon his earlier work and introduced two new
features into the ieee802154 stack. Beaconing to announce existing
PAN's and passive scanning to discover the beacons and associated
PAN's. The matching changes to the userspace configuration tool
have been posted as well and will be released together with the
kernel release.
Arnd Bergmann and Dmitry Torokhov worked on converting the
at86rf230 and cc2520 drivers away from the unused platform_data
usage and towards the new gpiod API. (I had to add a revert as
Dmitry found a regression on an already pushed tree on my side).
Changes since v1 (pull request 2023-02-02)
- Netlink API extack and NLA_POLICY* usage as suggested by Jakub
- Removed always true condition found by kernel test robot
- Simplify device removal with running background job for scanning
- Fix problems with beacon sending in some cases by using the MLME
tx path
* tag 'ieee802154-for-net-next-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan-next:
ieee802154: Drop device trackers
mac802154: Fix an always true condition
mac802154: Send beacons using the MLME Tx path
ieee802154: Change error code on monitor scan netlink request
ieee802154: Convert scan error messages to extack
ieee802154: Use netlink policies when relevant on scan parameters
ieee802154: at86rf230: switch to using gpiod API
ieee802154: at86rf230: drop support for platform data
Revert "at86rf230: convert to gpio descriptors"
cc2520: move to gpio descriptors
mac802154: Avoid superfluous endianness handling
at86rf230: convert to gpio descriptors
mac802154: Handle basic beaconing
ieee802154: Add support for user beaconing requests
mac802154: Handle passive scanning
mac802154: Add MLME Tx locked helpers
mac802154: Prepare forcing specific symbol duration
ieee802154: Introduce a helper to validate a channel
ieee802154: Define a beacon frame header
ieee802154: Add support for user scanning requests
====================
Link: https://lore.kernel.org/r/20230220213749.386451-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-02-17
We've added 64 non-merge commits during the last 7 day(s) which contain
a total of 158 files changed, 4190 insertions(+), 988 deletions(-).
The main changes are:
1) Add a rbtree data structure following the "next-gen data structure"
precedent set by recently-added linked-list, that is, by using
kfunc + kptr instead of adding a new BPF map type, from Dave Marchevsky.
2) Add a new benchmark for hashmap lookups to BPF selftests,
from Anton Protopopov.
3) Fix bpf_fib_lookup to only return valid neighbors and add an option
to skip the neigh table lookup, from Martin KaFai Lau.
4) Add cgroup.memory=nobpf kernel parameter option to disable BPF memory
accouting for container environments, from Yafang Shao.
5) Batch of ice multi-buffer and driver performance fixes,
from Alexander Lobakin.
6) Fix a bug in determining whether global subprog's argument is
PTR_TO_CTX, which is based on type names which breaks kprobe progs,
from Andrii Nakryiko.
7) Prep work for future -mcpu=v4 LLVM option which includes usage of
BPF_ST insn. Thus improve BPF_ST-related value tracking in verifier,
from Eduard Zingerman.
8) More prep work for later building selftests with Memory Sanitizer
in order to detect usages of undefined memory, from Ilya Leoshkevich.
9) Fix xsk sockets to check IFF_UP earlier to avoid a NULL pointer
dereference via sendmsg(), from Maciej Fijalkowski.
10) Implement BPF trampoline for RV64 JIT compiler, from Pu Lehui.
11) Fix BPF memory allocator in combination with BPF hashtab where it could
corrupt special fields e.g. used in bpf_spin_lock, from Hou Tao.
12) Fix LoongArch BPF JIT to always use 4 instructions for function
address so that instruction sequences don't change between passes,
from Hengqi Chen.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (64 commits)
selftests/bpf: Add bpf_fib_lookup test
bpf: Add BPF_FIB_LOOKUP_SKIP_NEIGH for bpf_fib_lookup
riscv, bpf: Add bpf trampoline support for RV64
riscv, bpf: Add bpf_arch_text_poke support for RV64
riscv, bpf: Factor out emit_call for kernel and bpf context
riscv: Extend patch_text for multiple instructions
Revert "bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES"
selftests/bpf: Add global subprog context passing tests
selftests/bpf: Convert test_global_funcs test to test_loader framework
bpf: Fix global subprog context argument resolution logic
LoongArch, bpf: Use 4 instructions for function address in JIT
bpf: bpf_fib_lookup should not return neigh in NUD_FAILED state
bpf: Disable bh in bpf_test_run for xdp and tc prog
xsk: check IFF_UP earlier in Tx path
Fix typos in selftest/bpf files
selftests/bpf: Use bpf_{btf,link,map,prog}_get_info_by_fd()
samples/bpf: Use bpf_{btf,link,map,prog}_get_info_by_fd()
bpftool: Use bpf_{btf,link,map,prog}_get_info_by_fd()
libbpf: Use bpf_{btf,link,map,prog}_get_info_by_fd()
libbpf: Introduce bpf_{btf,link,map,prog}_get_info_by_fd()
...
====================
Link: https://lore.kernel.org/r/20230217221737.31122-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a followup of commit 2558b8039d ("net: use a bounce
buffer for copying skb->mark")
x86 and powerpc define user_access_begin, meaning
that they are not able to perform user copy checks
when using user_write_access_begin() / unsafe_copy_to_user()
and friends [1]
Instead of waiting bugs to trigger on other arches,
add a check_object_size() in put_cmsg() to make sure
that new code tested on x86 with CONFIG_HARDENED_USERCOPY=y
will perform more security checks.
[1] We can not generically call check_object_size() from
unsafe_copy_to_user() because UACCESS is enabled at this point.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The recent merge from net left-over some unused code in
leftover.c - nomen omen.
Just drop the unused bits.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
That really was meant to be a per netns attribute from the beginning.
The idea is that once proper isolation is in place in the main
namespace, additional demux in the child namespaces will be redundant.
Let's make child netns default rps mask empty by default.
To avoid bloating the netns with a possibly large cpumask, allocate
it on-demand during the first write operation.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Add safeguard to check for NULL tupe in objects updates via
NFT_MSG_NEWOBJ, this should not ever happen. From Alok Tiwari.
2) Incorrect pointer check in the new destroy rule command,
from Yang Yingliang.
3) Incorrect status bitcheck in nf_conntrack_udp_packet(),
from Florian Westphal.
4) Simplify seq_print_acct(), from Ilia Gavrilov.
5) Use 2-arg optimal variant of kfree_rcu() in IPVS,
from Julian Anastasov.
6) TCP connection enters CLOSE state in conntrack for locally
originated TCP reset packet from the reject target,
from Florian Westphal.
The fixes#2 and #3 in this series address issues from the previous pull
nf-next request in this net-next cycle.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Change icmpv6_echo_reply() to return a drop reason.
For the moment, return NOT_SPECIFIED or SKB_CONSUMED.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hosts can often receive neighbour discovery messages
that are not for them.
Use a dedicated drop reason to make clear the packet is dropped
for this normal case.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a generic drop reason for any error detected
in ndisc_parse_options().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change ndisc_redirect_rcv() to return a drop reason.
For the moment, return PKT_TOO_SMALL, NOT_SPECIFIED
and values from icmpv6_notify().
More reasons are added later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change ndisc_router_discovery() to return a drop reason.
For the moment, return PKT_TOO_SMALL, NOT_SPECIFIED
and SKB_CONSUMED.
More reasons are added later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change ndisc_recv_rs() to return a drop reason.
For the moment, return PKT_TOO_SMALL, NOT_SPECIFIED
or SKB_CONSUMED. More reasons are added later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change ndisc_recv_na() to return a drop reason.
For the moment, return PKT_TOO_SMALL, NOT_SPECIFIED
or SKB_CONSUMED. More reasons are added later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change ndisc_recv_ns() to return a drop reason.
For the moment, return PKT_TOO_SMALL, NOT_SPECIFIED
or SKB_CONSUMED.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we try to start AF_XDP on some machines with long running time, due
to the machine's memory fragmentation problem, there is no sufficient
contiguous physical memory that will cause the start failure.
If the size of the queue is 8 * 1024, then the size of the desc[] is
8 * 1024 * 8 = 16 * PAGE, but we also add struct xdp_ring size, so it is
16page+. This is necessary to apply for a 4-order memory. If there are a
lot of queues, it is difficult to these machine with long running time.
Here, that we actually waste 15 pages. 4-Order memory is 32 pages, but
we only use 17 pages.
This patch replaces __get_free_pages() by vmalloc() to allocate memory
to solve these problems.
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It makes no sense to keep randomly large max_sdu values, especially if
larger than the device's max_mtu. These are visible in "tc qdisc show".
Such a max_sdu is practically unlimited and will cause no packets for
that traffic class to be dropped on enqueue.
Just set max_sdu_dynamic to U32_MAX, which in the logic below causes
taprio to save a max_frm_len of U32_MAX and a max_sdu presented to user
space of 0 (unlimited).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The overhead specified in the size table comes from the user. With small
time intervals (or gates always closed), the overhead can be larger than
the max interval for that traffic class, and their difference is
negative.
What we want to happen is for max_sdu_dynamic to have the smallest
non-zero value possible (1) which means that all packets on that traffic
class are dropped on enqueue. However, since max_sdu_dynamic is u32, a
negative is represented as a large value and oversized dropping never
happens.
Use max_t with int to force a truncation of max_frm_len to no smaller
than dev->hard_header_len + 1, which in turn makes max_sdu_dynamic no
smaller than 1.
Fixes: fed87cc671 ("net/sched: taprio: automatically calculate queueMaxSDU based on TC gate durations")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
taprio_calculate_gate_durations() depends on netdev_get_num_tc() and
this returns 0. So it calculates the maximum gate durations for no
traffic class.
I had tested the blamed commit only with another patch in my tree, one
which in the end I decided isn't valuable enough to submit ("net/sched:
taprio: mask off bits in gate mask that exceed number of TCs").
The problem is that having this patch threw off my testing. By moving
the netdev_set_num_tc() call earlier, we implicitly gave to
taprio_calculate_gate_durations() the information it needed.
Extract only the portion from the unsubmitted change which applies the
mqprio configuration to the netdev earlier.
Link: https://patchwork.kernel.org/project/netdevbpf/patch/20230130173145.475943-15-vladimir.oltean@nxp.com/
Fixes: a306a90c8f ("net/sched: taprio: calculate tc gate durations")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix three cases of overproduction of wakeups:
(1) rxrpc_input_split_jumbo() conditionally notifies the app that there's
data for recvmsg() to collect if it queues some data - and then its
only caller, rxrpc_input_data(), goes and wakes up recvmsg() anyway.
Fix the rxrpc_input_data() to only do the wakeup in failure cases.
(2) If a DATA packet is received for a call by the I/O thread whilst
recvmsg() is busy draining the call's rx queue in the app thread, the
call will left on the recvmsg() queue for recvmsg() to pick up, even
though there isn't any data on it.
This can cause an unexpected recvmsg() with a 0 return and no MSG_EOR
set after the reply has been posted to a service call.
Fix this by discarding pending calls from the recvmsg() queue that
don't need servicing yet.
(3) Not-yet-completed calls get requeued after having data read from them,
even if they have no data to read.
Fix this by only requeuing them if they have data waiting on them; if
they don't, the I/O thread will requeue them when data arrives or they
fail.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/3386149.1676497685@warthog.procyon.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In order to prevent a device from disappearing when a background job was
started, dev_hold() and dev_put() calls were made. During the
stabilization phase of the scan/beacon features, it was later decided
that removing the device while a background job was ongoing was a valid use
case, and we should instead stop the background job and then remove the
device, rather than prevent the device from being removed. This is what
is currently done, which means manually reference counting the device
during background jobs is no longer needed.
Fixes: ed3557c947 ("ieee802154: Add support for user scanning requests")
Fixes: 9bc114504b ("ieee802154: Add support for user beaconing requests")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230214135035.1202471-7-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
At this stage we simply do not care about the delayed work value,
because active scan is not yet supported, so we can blindly queue
another work once a beacon has been sent.
It fixes a smatch warning:
mac802154_beacon_worker() warn: always true condition
'(local->beacon_interval >= 0) => (0-u32max >= 0)'
Fixes: 3accf47627 ("mac802154: Handle basic beaconing")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230214135035.1202471-6-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
Using ieee802154_subif_start_xmit() to bypass the net queue when
sending beacons is broken because it does not acquire the
HARD_TX_LOCK(), hence not preventing datagram buffers to be smashed by
beacons upon contention situation. Using the mlme_tx helper is not the
best fit either but at least it is not buggy and has little-to-no
performance hit. More details are given in the comment explaining this
choice in the code.
Fixes: 3accf47627 ("mac802154: Handle basic beaconing")
Reported-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20230214135035.1202471-5-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
The bpf_fib_lookup() also looks up the neigh table.
This was done before bpf_redirect_neigh() was added.
In the use case that does not manage the neigh table
and requires bpf_fib_lookup() to lookup a fib to
decide if it needs to redirect or not, the bpf prog can
depend only on using bpf_redirect_neigh() to lookup the
neigh. It also keeps the neigh entries fresh and connected.
This patch adds a bpf_fib_lookup flag, SKIP_NEIGH, to avoid
the double neigh lookup when the bpf prog always call
bpf_redirect_neigh() to do the neigh lookup. The params->smac
output is skipped together when SKIP_NEIGH is set because
bpf_redirect_neigh() will figure out the smac also.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230217205515.3583372-1-martin.lau@linux.dev
The bpf_fib_lookup() helper does not only look up the fib (ie. route)
but it also looks up the neigh. Before returning the neigh, the helper
does not check for NUD_VALID. When a neigh state (neigh->nud_state)
is in NUD_FAILED, its dmac (neigh->ha) could be all zeros. The helper
still returns SUCCESS instead of NO_NEIGH in this case. Because of the
SUCCESS return value, the bpf prog directly uses the returned dmac
and ends up filling all zero in the eth header.
This patch checks for NUD_VALID and returns NO_NEIGH if the neigh is
not valid.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230217004150.2980689-3-martin.lau@linux.dev
Some of the bpf helpers require bh disabled. eg. The bpf_fib_lookup
helper that will be used in a latter selftest. In particular, it
calls ___neigh_lookup_noref that expects the bh disabled.
This patch disables bh before calling bpf_prog_run[_xdp], so
the testing prog can also use those helpers.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230217004150.2980689-2-martin.lau@linux.dev
iptables/nftables support responding to tcp packets with tcp resets.
The generated tcp reset packet passes through both output and postrouting
netfilter hooks, but conntrack will never see them because the generated
skb has its ->nfct pointer copied over from the packet that triggered the
reset rule.
If the reset rule is used for established connections, this
may result in the conntrack entry to be around for a very long
time (default timeout is 5 days).
One way to avoid this would be to not copy the nf_conn pointer
so that the rest packet passes through conntrack too.
Problem is that output rules might not have the same conntrack
zone setup as the prerouting ones, so its possible that the
reset skb won't find the correct entry. Generating a template
entry for the skb seems error prone as well.
Add an explicit "closing" function that switches a confirmed
conntrack entry to closed state and wire this up for tcp.
If the entry isn't confirmed, no action is needed because
the conntrack entry will never be committed to the table.
Reported-by: Russel King <linux@armlinux.org.uk>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Johannes Berg says:
====================
Major stack changes:
* EHT channel puncturing support (client & AP)
* some support for AP MLD without mac80211
* fixes for A-MSDU on mesh connections
Major driver changes:
iwlwifi
* EHT rate reporting
* Bump FW API to 74 for AX devices
* STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware
mt76
* switch to using page pool allocator
* mt7996 EHT (Wi-Fi 7) support
* Wireless Ethernet Dispatch (WED) reset support
libertas
* WPS enrollee support
brcmfmac
* Rename Cypress 89459 to BCM4355
* BCM4355 and BCM4377 support
mwifiex
* SD8978 chipset support
rtl8xxxu
* LED support
ath12k
* new driver for Qualcomm Wi-Fi 7 devices
ath11k
* IPQ5018 support
* Fine Timing Measurement (FTM) responder role support
* channel 177 support
ath10k
* store WLAN firmware version in SMEM image table
* tag 'wireless-next-2023-03-16' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (207 commits)
wifi: brcmfmac: p2p: Introduce generic flexible array frame member
wifi: mac80211: add documentation for amsdu_mesh_control
wifi: cfg80211: remove gfp parameter from cfg80211_obss_color_collision_notify description
wifi: mac80211: always initialize link_sta with sta
wifi: mac80211: pass 'sta' to ieee80211_rx_data_set_sta()
wifi: cfg80211: Set SSID if it is not already set
wifi: rtw89: move H2C of del_pkt_offload before polling FW status ready
wifi: rtw89: use readable return 0 in rtw89_mac_cfg_ppdu_status()
wifi: rtw88: usb: drop now unnecessary URB size check
wifi: rtw88: usb: send Zero length packets if necessary
wifi: rtw88: usb: Set qsel correctly
wifi: mac80211: fix off-by-one link setting
wifi: mac80211: Fix for Rx fragmented action frames
wifi: mac80211: avoid u32_encode_bits() warning
wifi: mac80211: Don't translate MLD addresses for multicast
wifi: cfg80211: call reg_notifier for self managed wiphy from driver hint
wifi: cfg80211: get rid of gfp in cfg80211_bss_color_notify
wifi: nl80211: Allow authentication frames and set keys on NAN interface
wifi: mac80211: fix non-MLO station association
wifi: mac80211: Allow NSS change only up to capability
...
====================
Link: https://lore.kernel.org/r/20230216105406.208416-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
