mirror of
https://github.com/torvalds/linux.git
synced 2025-12-07 20:06:24 +00:00
94deaf69dcd33462c61fa8cabb0883e3085a1046
3020 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Usama Arif
|
81d3ff3c6f |
mm: add sysfs entry to disable splitting underused THPs
If disabled, THPs faulted in or collapsed will not be added to _deferred_list, and therefore won't be considered for splitting under memory pressure if underused. Link: https://lkml.kernel.org/r/20240830100438.3623486-7-usamaarif642@gmail.com Signed-off-by: Usama Arif <usamaarif642@gmail.com> Cc: Alexander Zhu <alexlzhu@fb.com> Cc: Barry Song <baohua@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kairui Song <ryncsn@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nico Pache <npache@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Shuang Zhai <zhais@google.com> Cc: Shuang Zhai <szhai2@cs.rochester.edu> Cc: Yu Zhao <yuzhao@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Usama Arif
|
dafff3f4c8 |
mm: split underused THPs
This is an attempt to mitigate the issue of running out of memory when THP is always enabled. During runtime whenever a THP is being faulted in (__do_huge_pmd_anonymous_page) or collapsed by khugepaged (collapse_huge_page), the THP is added to _deferred_list. Whenever memory reclaim happens in linux, the kernel runs the deferred_split shrinker which goes through the _deferred_list. If the folio was partially mapped, the shrinker attempts to split it. If the folio is not partially mapped, the shrinker checks if the THP was underused, i.e. how many of the base 4K pages of the entire THP were zero-filled. If this number goes above a certain threshold (decided by /sys/kernel/mm/transparent_hugepage/khugepaged/max_ptes_none), the shrinker will attempt to split that THP. Then at remap time, the pages that were zero-filled are mapped to the shared zeropage, hence saving memory. Link: https://lkml.kernel.org/r/20240830100438.3623486-6-usamaarif642@gmail.com Signed-off-by: Usama Arif <usamaarif642@gmail.com> Suggested-by: Rik van Riel <riel@surriel.com> Co-authored-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Alexander Zhu <alexlzhu@fb.com> Cc: Barry Song <baohua@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kairui Song <ryncsn@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nico Pache <npache@redhat.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Shuang Zhai <zhais@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: Shuang Zhai <szhai2@cs.rochester.edu> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
SeongJae Park
|
23a425aab0 |
Docs/damon: use damonitor GitHub organization instead of awslabs
Patch series "Docs/damon: update GitHub repo URLs and maintainer-profile". Replace GitHub URLS on DAMON documents for none-kernel parts DAMON repos with new ones[1] via the first patch. With following two patches, wordsmith maitnainer-profile for better readability, and document the Google clendsar for bi-weekly meetups, respectively. [1] https://lore.kernel.org/20240813232158.83903-1-sj@kernel.org This patch (of 3): GitHub repos for non-kernel parts of DAMON project including 'damo', 'damon-tests' and 'damoos' will be moved[1] from 'awslabs' org to 'damonitor', by 2024-09-05. Update related URLs in kernel tree. [1] https://lore.kernel.org/20240813232158.83903-1-sj@kernel.org Link: https://lkml.kernel.org/r/20240826015741.80707-1-sj@kernel.org Link: https://lkml.kernel.org/r/20240826015741.80707-2-sj@kernel.org Signed-off-by: SeongJae Park <sj@kernel.org> Cc: Alex Shi <alexs@kernel.org> Cc: Hu Haowen <2023002089@link.tyut.edu.cn> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Yanteng Si <siyanteng@loongson.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Barry Song
|
8175ebfd30 |
mm: count the number of partially mapped anonymous THPs per size
When a THP is added to the deferred_list due to partially mapped, its partial pages are unused, leading to wasted memory and potentially increasing memory reclamation pressure. Detailing the specifics of how unmapping occurs is quite difficult and not that useful, so we adopt a simple approach: each time a THP enters the deferred_list, we increment the count by 1; whenever it leaves for any reason, we decrement the count by 1. Link: https://lkml.kernel.org/r/20240824010441.21308-3-21cnbao@gmail.com Signed-off-by: Barry Song <v-songbaohua@oppo.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Chris Li <chrisl@kernel.org> Cc: Chuanhua Han <hanchuanhua@oppo.com> Cc: Kairui Song <kasong@tencent.com> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Lance Yang <ioworker0@gmail.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Shuai Yuan <yuanshuai@oppo.com> Cc: Usama Arif <usamaarif642@gmail.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Barry Song
|
5d65c8d758 |
mm: count the number of anonymous THPs per size
Patch series "mm: count the number of anonymous THPs per size", v4.
Knowing the number of transparent anon THPs in the system is crucial
for performance analysis. It helps in understanding the ratio and
distribution of THPs versus small folios throughout the system.
Additionally, partial unmapping by userspace can lead to significant waste
of THPs over time and increase memory reclamation pressure. We need this
information for comprehensive system tuning.
This patch (of 2):
Let's track for each anonymous THP size, how many of them are currently
allocated. We'll track the complete lifespan of an anon THP, starting
when it becomes an anon THP ("large anon folio") (->mapping gets set),
until it gets freed (->mapping gets cleared).
Introduce a new "nr_anon" counter per THP size and adjust the
corresponding counter in the following cases:
* We allocate a new THP and call folio_add_new_anon_rmap() to map
it the first time and turn it into an anon THP.
* We split an anon THP into multiple smaller ones.
* We migrate an anon THP, when we prepare the destination.
* We free an anon THP back to the buddy.
Note that AnonPages in /proc/meminfo currently tracks the total number of
*mapped* anonymous *pages*, and therefore has slightly different
semantics. In the future, we might also want to track "nr_anon_mapped"
for each THP size, which might be helpful when comparing it to the number
of allocated anon THPs (long-term pinning, stuck in swapcache, memory
leaks, ...).
Further note that for now, we only track anon THPs after they got their
->mapping set, for example via folio_add_new_anon_rmap(). If we would
allocate some in the swapcache, they will only show up in the statistics
for now after they have been mapped to user space the first time, where we
call folio_add_new_anon_rmap().
[akpm@linux-foundation.org: documentation fixups, per David]
Link: https://lkml.kernel.org/r/3e8add35-e26b-443b-8a04-1078f4bc78f6@redhat.com
Link: https://lkml.kernel.org/r/20240824010441.21308-1-21cnbao@gmail.com
Link: https://lkml.kernel.org/r/20240824010441.21308-2-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Chuanhua Han <hanchuanhua@oppo.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Lance Yang <ioworker0@gmail.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shuai Yuan <yuanshuai@oppo.com>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Mike Yuan
|
5a53623d0f |
Documentation/cgroup-v2: clarify that zswap.writeback is ignored if zswap is disabled
As discussed in [1], zswap-related settings natually lose their effect when zswap is disabled, specifically zswap.writeback here. Be explicit about this behavior. [1] https://lore.kernel.org/linux-kernel/CAKEwX=Mhbwhh-=xxCU-RjMXS_n=RpV3Gtznb2m_3JgL+jzz++g@mail.gmail.com/ [akpm@linux-foundation.org: fix/simplify text] Link: https://lkml.kernel.org/r/20240823162506.12117-3-me@yhndnzj.com Signed-off-by: Mike Yuan <me@yhndnzj.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Yosry Ahmed <yosryahmed@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Kaiyang Zhao
|
f77f0c7514 |
mm,memcg: provide per-cgroup counters for NUMA balancing operations
The ability to observe the demotion and promotion decisions made by the kernel on a per-cgroup basis is important for monitoring and tuning containerized workloads on machines equipped with tiered memory. Different containers in the system may experience drastically different memory tiering actions that cannot be distinguished from the global counters alone. For example, a container running a workload that has a much hotter memory accesses will likely see more promotions and fewer demotions, potentially depriving a colocated container of top tier memory to such an extent that its performance degrades unacceptably. For another example, some containers may exhibit longer periods between data reuse, causing much more numa_hint_faults than numa_pages_migrated. In this case, tuning hot_threshold_ms may be appropriate, but the signal can easily be lost if only global counters are available. In the long term, we hope to introduce per-cgroup control of promotion and demotion actions to implement memory placement policies in tiering. This patch set adds seven counters to memory.stat in a cgroup: numa_pages_migrated, numa_pte_updates, numa_hint_faults, pgdemote_kswapd, pgdemote_khugepaged, pgdemote_direct and pgpromote_success. pgdemote_* and pgpromote_success are also available in memory.numa_stat. count_memcg_events_mm() is added to count multiple event occurrences at once, and get_mem_cgroup_from_folio() is added because we need to get a reference to the memcg of a folio before it's migrated to track numa_pages_migrated. The accounting of PGDEMOTE_* is moved to shrink_inactive_list() before being changed to per-cgroup. [kaiyang2@cs.cmu.edu: add documentation of the memcg counters in cgroup-v2.rst] Link: https://lkml.kernel.org/r/20240814235122.252309-1-kaiyang2@cs.cmu.edu Link: https://lkml.kernel.org/r/20240814174227.30639-1-kaiyang2@cs.cmu.edu Signed-off-by: Kaiyang Zhao <kaiyang2@cs.cmu.edu> Cc: David Rientjes <rientjes@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Wei Xu <weixugc@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Mike Rapoport (Microsoft)
|
101d647080 |
docs: move numa=fake description to kernel-parameters.txt
NUMA emulation can be now enabled on arm64 and riscv in addition to x86. Move description of numa=fake parameters from x86 documentation of admin-guide/kernel-parameters.txt Link: https://lkml.kernel.org/r/20240807064110.1003856-27-rppt@kernel.org Suggested-by: Zi Yan <ziy@nvidia.com> Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> [arm64 + CXL via QEMU] Acked-by: Dan Williams <dan.j.williams@intel.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: David S. Miller <davem@davemloft.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiaxun Yang <jiaxun.yang@flygoat.com> Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Rafael J. Wysocki <rafael@kernel.org> Cc: Rob Herring (Arm) <robh@kernel.org> Cc: Samuel Holland <samuel.holland@sifive.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Shakeel Butt
|
340afb8027 |
memcg: initiate deprecation of pressure_level
The pressure_level in memcg v1 provides memory pressure notifications to the user space. At the moment it provides notifications for three levels of memory pressure i.e. low, medium and critical, which are defined based on internal memory reclaim implementation details. More specifically the ratio of scanned and reclaimed pages during a memory reclaim. However this is not robust as there are workloads with mostly unreclaimable user memory or kernel memory. For v2, the users can use PSI for memory pressure status of the system or the cgroup. Let's start the deprecation process for pressure_level and add warnings to gather the info on how the current users are using this interface and how they can be used to PSI. Link: https://lkml.kernel.org/r/20240814220021.3208384-5-shakeel.butt@linux.dev Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev> Reviewed-by: T.J. Mercier <tjmercier@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Shakeel Butt
|
6df4ad7047 |
memcg: initiate deprecation of oom_control
The oom_control provides functionality to disable memcg oom-killer, notifications on oom-kill and reading the stats regarding oom-kills. This interface was mainly introduced to provide functionality for userspace oom-killers. However it is not robust enough and only supports OOM handling in the page fault path. For v2, the users can use the combination of memory.events notifications, memory.high and PSI to provide userspace OOM-killing functionality. Actually LMKD in Android and OOMd in systemd and Meta infrastructure already use PSI in combination with other stats to implement userspace OOM-killing. Let's start the deprecation process for v1 and gather the info on how the current users are using this interface and work on providing a more robust functionality in v2. Link: https://lkml.kernel.org/r/20240814220021.3208384-4-shakeel.butt@linux.dev Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev> Reviewed-by: T.J. Mercier <tjmercier@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Shakeel Butt
|
569c4f62d8 |
memcg: initiate deprecation of v1 soft limit
Memcg v1 provides soft limit functionality for the best effort memory sharing between multiple workloads on a system. It is usually triggered through kswapd and at the moment does not reclaim kernel memory. Memcg v2 provides more straightforward best effort (memory.low) and hard protection (memory.min) functionalities. Let's initiate the deprecation of soft limit from v1 and gather if v2 needs something more to move the existing v1 users to v2 regarding soft limit. Link: https://lkml.kernel.org/r/20240814220021.3208384-3-shakeel.butt@linux.dev Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev> Reviewed-by: T.J. Mercier <tjmercier@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Shakeel Butt
|
d046ff46ee |
memcg: initiate deprecation of v1 tcp accounting
Patch series "memcg: initiate deprecation of v1 features", v2. Start the deprecation process of the memcg v1 features which we discussed during LSFMMBPF 2024 [1]. For now add the warnings to collect the information on how the current users are using these features. Next we will work on providing better alternatives in v2 (if needed) and fully deprecate these features. Link: https://lwn.net/Articles/974575 [1] This patch (of 4): Memcg v1 provides opt-in TCP memory accounting feature. However it is mostly unused due to its performance impact on the network traffic. In v2, the TCP memory is accounted in the regular memory usage and is transparent to the users but they can observe the TCP memory usage through memcg stats. Let's initiate the deprecation process of memcg v1's tcp accounting functionality and add warnings to gather if there are any users and if there are, collect how they are using it and plan to provide them better alternative in v2. Link: https://lkml.kernel.org/r/20240814220021.3208384-1-shakeel.butt@linux.dev Link: https://lkml.kernel.org/r/20240814220021.3208384-2-shakeel.butt@linux.dev Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev> Reviewed-by: T.J. Mercier <tjmercier@google.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Ryan Roberts
|
dd4d30d1cd |
mm: override mTHP "enabled" defaults at kernel cmdline
Add thp_anon= cmdline parameter to allow specifying the default enablement of each supported anon THP size. The parameter accepts the following format and can be provided multiple times to configure each size: thp_anon=<size>,<size>[KMG]:<value>;<size>-<size>[KMG]:<value> An example: thp_anon=16K-64K:always;128K,512K:inherit;256K:madvise;1M-2M:never See Documentation/admin-guide/mm/transhuge.rst for more details. Configuring the defaults at boot time is useful to allow early user space to take advantage of mTHP before its been configured through sysfs. [v-songbaohua@oppo.com: use get_oder() and check size is is_power_of_2] Link: https://lkml.kernel.org/r/20240814224635.43272-1-21cnbao@gmail.com [ryan.roberts@arm.com: some minor cleanup according to David's comments] Link: https://lkml.kernel.org/r/20240820105244.62703-1-21cnbao@gmail.com Link: https://lkml.kernel.org/r/20240814020247.67297-1-21cnbao@gmail.com Signed-off-by: Ryan Roberts <ryan.roberts@arm.com> Co-developed-by: Barry Song <v-songbaohua@oppo.com> Signed-off-by: Barry Song <v-songbaohua@oppo.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Lance Yang <ioworker0@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
David Finkel
|
c6f53ed8f2 |
mm, memcg: cg2 memory{.swap,}.peak write handlers
Patch series "mm, memcg: cg2 memory{.swap,}.peak write handlers", v7.
This patch (of 2):
Other mechanisms for querying the peak memory usage of either a process or
v1 memory cgroup allow for resetting the high watermark. Restore parity
with those mechanisms, but with a less racy API.
For example:
- Any write to memory.max_usage_in_bytes in a cgroup v1 mount resets
the high watermark.
- writing "5" to the clear_refs pseudo-file in a processes's proc
directory resets the peak RSS.
This change is an evolution of a previous patch, which mostly copied the
cgroup v1 behavior, however, there were concerns about races/ownership
issues with a global reset, so instead this change makes the reset
filedescriptor-local.
Writing any non-empty string to the memory.peak and memory.swap.peak
pseudo-files reset the high watermark to the current usage for subsequent
reads through that same FD.
Notably, following Johannes's suggestion, this implementation moves the
O(FDs that have written) behavior onto the FD write(2) path. Instead, on
the page-allocation path, we simply add one additional watermark to
conditionally bump per-hierarchy level in the page-counter.
Additionally, this takes Longman's suggestion of nesting the
page-charging-path checks for the two watermarks to reduce the number of
common-case comparisons.
This behavior is particularly useful for work scheduling systems that need
to track memory usage of worker processes/cgroups per-work-item. Since
memory can't be squeezed like CPU can (the OOM-killer has opinions), these
systems need to track the peak memory usage to compute system/container
fullness when binpacking workitems.
Most notably, Vimeo's use-case involves a system that's doing global
binpacking across many Kubernetes pods/containers, and while we can use
PSI for some local decisions about overload, we strive to avoid packing
workloads too tightly in the first place. To facilitate this, we track
the peak memory usage. However, since we run with long-lived workers (to
amortize startup costs) we need a way to track the high watermark while a
work-item is executing. Polling runs the risk of missing short spikes
that last for timescales below the polling interval, and peak memory
tracking at the cgroup level is otherwise perfect for this use-case.
As this data is used to ensure that binpacked work ends up with sufficient
headroom, this use-case mostly avoids the inaccuracies surrounding
reclaimable memory.
Link: https://lkml.kernel.org/r/20240730231304.761942-1-davidf@vimeo.com
Link: https://lkml.kernel.org/r/20240729143743.34236-1-davidf@vimeo.com
Link: https://lkml.kernel.org/r/20240729143743.34236-2-davidf@vimeo.com
Signed-off-by: David Finkel <davidf@vimeo.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Waiman Long <longman@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Daniel Yang
|
86cfa9a85f |
Documentation: dm-crypt.rst warning + error fix
While building kernel documention using make htmldocs command, I was
getting unexpected indentation error. Single description was given for
two module parameters with wrong indentation. So, I corrected the
indentation of both parameters and the description.
Signed-off-by: Shibu kumar <shibukumar.bit@gmail.com>
Signed-off-by: Daniel Yang <danielyangkang@gmail.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes:
|
||
|
Steve French
|
1b5487aefb |
smb3: fix setting SecurityFlags when encryption is required
Setting encryption as required in security flags was broken. For example (to require all mounts to be encrypted by setting): "echo 0x400c5 > /proc/fs/cifs/SecurityFlags" Would return "Invalid argument" and log "Unsupported security flags" This patch fixes that (e.g. allowing overriding the default for SecurityFlags 0x00c5, including 0x40000 to require seal, ie SMB3.1.1 encryption) so now that works and forces encryption on subsequent mounts. Acked-by: Bharath SM <bharathsm@microsoft.com> Cc: stable@vger.kernel.org Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
Tetsuo Handa
|
b88f55389a |
profiling: remove profile=sleep support
The kernel sleep profile is no longer working due to a recursive locking bug introduced by commit |
||
|
Linus Torvalds
|
65ad409e63 |
Merge tag 's390-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik: - Fix KMSAN build breakage caused by the conflict between s390 and mm-stable trees - Add KMSAN page markers for ptdump - Add runtime constant support - Fix __pa/__va for modules under non-GPL licenses by exporting necessary vm_layout struct with EXPORT_SYMBOL to prevent linkage problems - Fix an endless loop in the CF_DIAG event stop in the CPU Measurement Counter Facility code when the counter set size is zero - Remove the PROTECTED_VIRTUALIZATION_GUEST config option and enable its functionality by default - Support allocation of multiple MSI interrupts per device and improve logging of architecture-specific limitations - Add support for lowcore relocation as a debugging feature to catch all null ptr dereferences in the kernel address space, improving detection beyond the current implementation's limited write access protection - Clean up and rework CPU alternatives to allow for callbacks and early patching for the lowcore relocation * tag 's390-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (39 commits) s390: Remove protvirt and kvm config guards for uv code s390/boot: Add cmdline option to relocate lowcore s390/kdump: Make kdump ready for lowcore relocation s390/entry: Make system_call() ready for lowcore relocation s390/entry: Make ret_from_fork() ready for lowcore relocation s390/entry: Make __switch_to() ready for lowcore relocation s390/entry: Make restart_int_handler() ready for lowcore relocation s390/entry: Make mchk_int_handler() ready for lowcore relocation s390/entry: Make int handlers ready for lowcore relocation s390/entry: Make pgm_check_handler() ready for lowcore relocation s390/entry: Add base register to CHECK_VMAP_STACK/CHECK_STACK macro s390/entry: Add base register to SIEEXIT macro s390/entry: Add base register to MBEAR macro s390/entry: Make __sie64a() ready for lowcore relocation s390/head64: Make startup code ready for lowcore relocation s390: Add infrastructure to patch lowcore accesses s390/atomic_ops: Disable flag outputs constraint for GCC versions below 14.2.0 s390/entry: Move SIE indicator flag to thread info s390/nmi: Simplify ptregs setup s390/alternatives: Remove alternative facility list ... |
||
|
Linus Torvalds
|
f646429524 |
Merge tag 'parisc-for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"The gettimeofday() and clock_gettime() syscalls are now available as
vDSO functions, and Dave added a patch which allows to use NVMe cards
in the PCI slots as fast and easy alternative to SCSI discs.
Summary:
- add gettimeofday() and clock_gettime() vDSO functions
- enable PCI_MSI_ARCH_FALLBACKS to allow PCI to PCIe bridge adaptor
with PCIe NVME card to function in parisc machines
- allow users to reduce kernel unaligned runtime warnings
- minor code cleanups"
* tag 'parisc-for-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Add support for CONFIG_SYSCTL_ARCH_UNALIGN_NO_WARN
parisc: Use max() to calculate parisc_tlb_flush_threshold
parisc: Fix warning at drivers/pci/msi/msi.h:121
parisc: Add 64-bit gettimeofday() and clock_gettime() vDSO functions
parisc: Add 32-bit gettimeofday() and clock_gettime() vDSO functions
parisc: Clean up unistd.h file
|
||
|
Helge Deller
|
cbade82334 |
parisc: Add support for CONFIG_SYSCTL_ARCH_UNALIGN_NO_WARN
Allow users to disable kernel warnings for unaligned memory accesses from kernel via the /proc/sys/kernel/ignore-unaligned-usertrap procfs entry. That way users can disable those warnings in case they happen too often. Signed-off-by: Helge Deller <deller@gmx.de> |
||
|
Sven Schnelle
|
035248a784 |
s390/alternatives: Remove noaltinstr option
The current Kernel doesn't boot without alternative patching on z16 machines. To avoid such bugs in the future, remove the option disable alternative patching. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> |
||
|
Linus Torvalds
|
fbc90c042c |
Merge tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- In the series "mm: Avoid possible overflows in dirty throttling" Jan
Kara addresses a couple of issues in the writeback throttling code.
These fixes are also targetted at -stable kernels.
- Ryusuke Konishi's series "nilfs2: fix potential issues related to
reserved inodes" does that. This should actually be in the
mm-nonmm-stable tree, along with the many other nilfs2 patches. My
bad.
- More folio conversions from Kefeng Wang in the series "mm: convert to
folio_alloc_mpol()"
- Kemeng Shi has sent some cleanups to the writeback code in the series
"Add helper functions to remove repeated code and improve readability
of cgroup writeback"
- Kairui Song has made the swap code a little smaller and a little
faster in the series "mm/swap: clean up and optimize swap cache
index".
- In the series "mm/memory: cleanly support zeropage in
vm_insert_page*(), vm_map_pages*() and vmf_insert_mixed()" David
Hildenbrand has reworked the rather sketchy handling of the use of
the zeropage in MAP_SHARED mappings. I don't see any runtime effects
here - more a cleanup/understandability/maintainablity thing.
- Dev Jain has improved selftests/mm/va_high_addr_switch.c's handling
of higher addresses, for aarch64. The (poorly named) series is
"Restructure va_high_addr_switch".
- The core TLB handling code gets some cleanups and possible slight
optimizations in Bang Li's series "Add update_mmu_tlb_range() to
simplify code".
- Jane Chu has improved the handling of our
fake-an-unrecoverable-memory-error testing feature MADV_HWPOISON in
the series "Enhance soft hwpoison handling and injection".
- Jeff Johnson has sent a billion patches everywhere to add
MODULE_DESCRIPTION() to everything. Some landed in this pull.
- In the series "mm: cleanup MIGRATE_SYNC_NO_COPY mode", Kefeng Wang
has simplified migration's use of hardware-offload memory copying.
- Yosry Ahmed performs more folio API conversions in his series "mm:
zswap: trivial folio conversions".
- In the series "large folios swap-in: handle refault cases first",
Chuanhua Han inches us forward in the handling of large pages in the
swap code. This is a cleanup and optimization, working toward the end
objective of full support of large folio swapin/out.
- In the series "mm,swap: cleanup VMA based swap readahead window
calculation", Huang Ying has contributed some cleanups and a possible
fixlet to his VMA based swap readahead code.
- In the series "add mTHP support for anonymous shmem" Baolin Wang has
taught anonymous shmem mappings to use multisize THP. By default this
is a no-op - users must opt in vis sysfs controls. Dramatic
improvements in pagefault latency are realized.
- David Hildenbrand has some cleanups to our remaining use of
page_mapcount() in the series "fs/proc: move page_mapcount() to
fs/proc/internal.h".
- David also has some highmem accounting cleanups in the series
"mm/highmem: don't track highmem pages manually".
- Build-time fixes and cleanups from John Hubbard in the series
"cleanups, fixes, and progress towards avoiding "make headers"".
- Cleanups and consolidation of the core pagemap handling from Barry
Song in the series "mm: introduce pmd|pte_needs_soft_dirty_wp helpers
and utilize them".
- Lance Yang's series "Reclaim lazyfree THP without splitting" has
reduced the latency of the reclaim of pmd-mapped THPs under fairly
common circumstances. A 10x speedup is seen in a microbenchmark.
It does this by punting to aother CPU but I guess that's a win unless
all CPUs are pegged.
- hugetlb_cgroup cleanups from Xiu Jianfeng in the series
"mm/hugetlb_cgroup: rework on cftypes".
- Miaohe Lin's series "Some cleanups for memory-failure" does just that
thing.
- Someone other than SeongJae has developed a DAMON feature in Honggyu
Kim's series "DAMON based tiered memory management for CXL memory".
This adds DAMON features which may be used to help determine the
efficiency of our placement of CXL/PCIe attached DRAM.
- DAMON user API centralization and simplificatio work in SeongJae
Park's series "mm/damon: introduce DAMON parameters online commit
function".
- In the series "mm: page_type, zsmalloc and page_mapcount_reset()"
David Hildenbrand does some maintenance work on zsmalloc - partially
modernizing its use of pageframe fields.
- Kefeng Wang provides more folio conversions in the series "mm: remove
page_maybe_dma_pinned() and page_mkclean()".
- More cleanup from David Hildenbrand, this time in the series
"mm/memory_hotplug: use PageOffline() instead of PageReserved() for
!ZONE_DEVICE". It "enlightens memory hotplug more about PageOffline()
pages" and permits the removal of some virtio-mem hacks.
- Barry Song's series "mm: clarify folio_add_new_anon_rmap() and
__folio_add_anon_rmap()" is a cleanup to the anon folio handling in
preparation for mTHP (multisize THP) swapin.
- Kefeng Wang's series "mm: improve clear and copy user folio"
implements more folio conversions, this time in the area of large
folio userspace copying.
- The series "Docs/mm/damon/maintaier-profile: document a mailing tool
and community meetup series" tells people how to get better involved
with other DAMON developers. From SeongJae Park.
- A large series ("kmsan: Enable on s390") from Ilya Leoshkevich does
that.
- David Hildenbrand sends along more cleanups, this time against the
migration code. The series is "mm/migrate: move NUMA hinting fault
folio isolation + checks under PTL".
- Jan Kara has found quite a lot of strangenesses and minor errors in
the readahead code. He addresses this in the series "mm: Fix various
readahead quirks".
- SeongJae Park's series "selftests/damon: test DAMOS tried regions and
{min,max}_nr_regions" adds features and addresses errors in DAMON's
self testing code.
- Gavin Shan has found a userspace-triggerable WARN in the pagecache
code. The series "mm/filemap: Limit page cache size to that supported
by xarray" addresses this. The series is marked cc:stable.
- Chengming Zhou's series "mm/ksm: cmp_and_merge_page() optimizations
and cleanup" cleans up and slightly optimizes KSM.
- Roman Gushchin has separated the memcg-v1 and memcg-v2 code - lots of
code motion. The series (which also makes the memcg-v1 code
Kconfigurable) are "mm: memcg: separate legacy cgroup v1 code and put
under config option" and "mm: memcg: put cgroup v1-specific memcg
data under CONFIG_MEMCG_V1"
- Dan Schatzberg's series "Add swappiness argument to memory.reclaim"
adds an additional feature to this cgroup-v2 control file.
- The series "Userspace controls soft-offline pages" from Jiaqi Yan
permits userspace to stop the kernel's automatic treatment of
excessive correctable memory errors. In order to permit userspace to
monitor and handle this situation.
- Kefeng Wang's series "mm: migrate: support poison recover from
migrate folio" teaches the kernel to appropriately handle migration
from poisoned source folios rather than simply panicing.
- SeongJae Park's series "Docs/damon: minor fixups and improvements"
does those things.
- In the series "mm/zsmalloc: change back to per-size_class lock"
Chengming Zhou improves zsmalloc's scalability and memory
utilization.
- Vivek Kasireddy's series "mm/gup: Introduce memfd_pin_folios() for
pinning memfd folios" makes the GUP code use FOLL_PIN rather than
bare refcount increments. So these paes can first be moved aside if
they reside in the movable zone or a CMA block.
- Andrii Nakryiko has added a binary ioctl()-based API to
/proc/pid/maps for much faster reading of vma information. The series
is "query VMAs from /proc/<pid>/maps".
- In the series "mm: introduce per-order mTHP split counters" Lance
Yang improves the kernel's presentation of developer information
related to multisize THP splitting.
- Michael Ellerman has developed the series "Reimplement huge pages
without hugepd on powerpc (8xx, e500, book3s/64)". This permits
userspace to use all available huge page sizes.
- In the series "revert unconditional slab and page allocator fault
injection calls" Vlastimil Babka removes a performance-affecting and
not very useful feature from slab fault injection.
* tag 'mm-stable-2024-07-21-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (411 commits)
mm/mglru: fix ineffective protection calculation
mm/zswap: fix a white space issue
mm/hugetlb: fix kernel NULL pointer dereference when migrating hugetlb folio
mm/hugetlb: fix possible recursive locking detected warning
mm/gup: clear the LRU flag of a page before adding to LRU batch
mm/numa_balancing: teach mpol_to_str about the balancing mode
mm: memcg1: convert charge move flags to unsigned long long
alloc_tag: fix page_ext_get/page_ext_put sequence during page splitting
lib: reuse page_ext_data() to obtain codetag_ref
lib: add missing newline character in the warning message
mm/mglru: fix overshooting shrinker memory
mm/mglru: fix div-by-zero in vmpressure_calc_level()
mm/kmemleak: replace strncpy() with strscpy()
mm, page_alloc: put should_fail_alloc_page() back behing CONFIG_FAIL_PAGE_ALLOC
mm, slab: put should_failslab() back behind CONFIG_SHOULD_FAILSLAB
mm: ignore data-race in __swap_writepage
hugetlbfs: ensure generic_hugetlb_get_unmapped_area() returns higher address than mmap_min_addr
mm: shmem: rename mTHP shmem counters
mm: swap_state: use folio_alloc_mpol() in __read_swap_cache_async()
mm/migrate: putback split folios when numa hint migration fails
...
|
||
|
Linus Torvalds
|
2c9b351240 |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Initial infrastructure for shadow stage-2 MMUs, as part of nested
virtualization enablement
- Support for userspace changes to the guest CTR_EL0 value, enabling
(in part) migration of VMs between heterogenous hardware
- Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1
of the protocol
- FPSIMD/SVE support for nested, including merged trap configuration
and exception routing
- New command-line parameter to control the WFx trap behavior under
KVM
- Introduce kCFI hardening in the EL2 hypervisor
- Fixes + cleanups for handling presence/absence of FEAT_TCRX
- Miscellaneous fixes + documentation updates
LoongArch:
- Add paravirt steal time support
- Add support for KVM_DIRTY_LOG_INITIALLY_SET
- Add perf kvm-stat support for loongarch
RISC-V:
- Redirect AMO load/store access fault traps to guest
- perf kvm stat support
- Use guest files for IMSIC virtualization, when available
s390:
- Assortment of tiny fixes which are not time critical
x86:
- Fixes for Xen emulation
- Add a global struct to consolidate tracking of host values, e.g.
EFER
- Add KVM_CAP_X86_APIC_BUS_CYCLES_NS to allow configuring the
effective APIC bus frequency, because TDX
- Print the name of the APICv/AVIC inhibits in the relevant
tracepoint
- Clean up KVM's handling of vendor specific emulation to
consistently act on "compatible with Intel/AMD", versus checking
for a specific vendor
- Drop MTRR virtualization, and instead always honor guest PAT on
CPUs that support self-snoop
- Update to the newfangled Intel CPU FMS infrastructure
- Don't advertise IA32_PERF_GLOBAL_OVF_CTRL as an MSR-to-be-saved, as
it reads '0' and writes from userspace are ignored
- Misc cleanups
x86 - MMU:
- Small cleanups, renames and refactoring extracted from the upcoming
Intel TDX support
- Don't allocate kvm_mmu_page.shadowed_translation for shadow pages
that can't hold leafs SPTEs
- Unconditionally drop mmu_lock when allocating TDP MMU page tables
for eager page splitting, to avoid stalling vCPUs when splitting
huge pages
- Bug the VM instead of simply warning if KVM tries to split a SPTE
that is non-present or not-huge. KVM is guaranteed to end up in a
broken state because the callers fully expect a valid SPTE, it's
all but dangerous to let more MMU changes happen afterwards
x86 - AMD:
- Make per-CPU save_area allocations NUMA-aware
- Force sev_es_host_save_area() to be inlined to avoid calling into
an instrumentable function from noinstr code
- Base support for running SEV-SNP guests. API-wise, this includes a
new KVM_X86_SNP_VM type, encrypting/measure the initial image into
guest memory, and finalizing it before launching it. Internally,
there are some gmem/mmu hooks needed to prepare gmem-allocated
pages before mapping them into guest private memory ranges
This includes basic support for attestation guest requests, enough
to say that KVM supports the GHCB 2.0 specification
There is no support yet for loading into the firmware those signing
keys to be used for attestation requests, and therefore no need yet
for the host to provide certificate data for those keys.
To support fetching certificate data from userspace, a new KVM exit
type will be needed to handle fetching the certificate from
userspace.
An attempt to define a new KVM_EXIT_COCO / KVM_EXIT_COCO_REQ_CERTS
exit type to handle this was introduced in v1 of this patchset, but
is still being discussed by community, so for now this patchset
only implements a stub version of SNP Extended Guest Requests that
does not provide certificate data
x86 - Intel:
- Remove an unnecessary EPT TLB flush when enabling hardware
- Fix a series of bugs that cause KVM to fail to detect nested
pending posted interrupts as valid wake eents for a vCPU executing
HLT in L2 (with HLT-exiting disable by L1)
- KVM: x86: Suppress MMIO that is triggered during task switch
emulation
Explicitly suppress userspace emulated MMIO exits that are
triggered when emulating a task switch as KVM doesn't support
userspace MMIO during complex (multi-step) emulation
Silently ignoring the exit request can result in the
WARN_ON_ONCE(vcpu->mmio_needed) firing if KVM exits to userspace
for some other reason prior to purging mmio_needed
See commit
|
||
|
Linus Torvalds
|
d2be38b9a5 |
Merge tag 'mips_6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer: - add support for Realtek RTL9302C - add support for Mobileye EyeQ6H - add support for Mobileye EyeQ OLB system controller - improve r4k clocksource - add mode for emulating ieee754 NAN2008 - rework for BMIPS CBR address handling - fixes for Loongson 2K1000 - defconfig updates - cleanups and fixes * tag 'mips_6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (58 commits) MIPS: config: Add ip30_defconfig MIPS: config: lemote2f: Regenerate defconfig MIPS: config: generic: Add board-litex MIPS: config: Enable MSA and virtualization for MIPS64R6 MIPS: Fix fallback march for SB1 mips: dts: realtek: Add RTL9302C board mips: generic: add fdt fixup for Realtek reference board mips: select REALTEK_OTTO_TIMER for Realtek platforms dt-bindings: interrupt-controller: realtek,rtl-intc: Add rtl9300-intc dt-bindings: mips: realtek: Add rtl930x-soc compatible dt-bindings: vendor-prefixes: Add Cameo Communications mips: dts: realtek: add device_type property to cpu node mips: dts: realtek: use "serial" instead of "uart" in node name MIPS: Implement ieee754 NAN2008 emulation mode MIPS: lantiq: improve USB initialization MIPS: GIC: Generate redirect block accessors MIPS: CPS: Add a couple of multi-cluster utility functions MIPS: Octeron: remove source file executable bit MAINTAINERS: Mobileye: add OLB drivers and dt-bindings MIPS: mobileye: eyeq5: add OLB system-controller node ... |
||
|
Linus Torvalds
|
3f386cb8ee |
Merge tag 'pci-v6.11-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Define PCIE_RESET_CONFIG_DEVICE_WAIT_MS for the generic 100ms
required after reset before config access (Kevin Xie)
- Define PCIE_T_RRS_READY_MS for the generic 100ms required after
reset before config access (probably should be unified with
PCIE_RESET_CONFIG_DEVICE_WAIT_MS) (Damien Le Moal)
Resource management:
- Rename find_resource() to find_resource_space() to be more
descriptive (Ilpo Järvinen)
- Export find_resource_space() for use by PCI core, which needs to
learn whether there is available space for a bridge window (Ilpo
Järvinen)
- Prevent double counting of resources so window size doesn't grow on
each remove/rescan cycle (Ilpo Järvinen)
- Relax bridge window sizing algorithm so a device doesn't break
simply because it was removed and rescanned (Ilpo Järvinen)
- Evaluate the ACPI PRESERVE_BOOT_CONFIG _DSM in
pci_register_host_bridge() (not acpi_pci_root_create()) so we can
unify it with similar DT functionality (Vidya Sagar)
- Extend use of DT "linux,pci-probe-only" property so it works
per-host bridge as well as globally (Vidya Sagar)
- Unify support for ACPI PRESERVE_BOOT_CONFIG _DSM and the DT
"linux,pci-probe-only" property in pci_preserve_config() (Vidya
Sagar)
Driver binding:
- Add devres infrastructure for managed request and map of partial
BAR resources (Philipp Stanner)
- Deprecate pcim_iomap_table() because uses like
"pcim_iomap_table()[0]" have no good way to return errors (Philipp
Stanner)
- Add an always-managed pcim_request_region() for use instead of
pci_request_region() and similar, which are sometimes managed
depending on whether pcim_enable_device() has been called
previously (Philipp Stanner)
- Reimplement pcim_set_mwi() so it doesn't need to keep store MWI
state (Philipp Stanner)
- Add pcim_intx() for use instead of pci_intx(), which is sometimes
managed depending on whether pcim_enable_device() has been called
previously (Philipp Stanner)
- Add managed pcim_iomap_range() to allow mapping of a partial BAR
(Philipp Stanner)
- Fix a devres mapping leak in drm/vboxvideo (Philipp Stanner)
Error handling:
- Add missing bridge locking in device reset path and add a warning
for other possible lock issues (Dan Williams)
- Fix use-after-free on concurrent DPC and hot-removal (Lukas Wunner)
Power management:
- Disable AER and DPC during suspend to avoid spurious wakeups if
they share an interrupt with PME (Kai-Heng Feng)
PCIe native device hotplug:
- Detect if a device was removed or replaced during system sleep so
we don't assume a new device is the one that used to be there
(Lukas Wunner)
Virtualization:
- Add an ACS quirk for Broadcom BCM5760X multi-function NIC; it
prevents transactions between functions even though it doesn't
advertise ACS, so the functions can be attached individually via
VFIO (Ajit Khaparde)
Peer-to-peer DMA:
- Add a "pci=config_acs=" kernel command-line parameter to relax
default ACS settings to enable additional peer-to-peer
configurations. Requires expert knowledge of topology and ACS
operation (Vidya Sagar)
Endpoint framework:
- Remove unused struct pci_epf_group.type_group (Christophe JAILLET)
- Fix error handling in vpci_scan_bus() and epf_ntb_epc_cleanup()
(Dan Carpenter)
- Make struct pci_epc_class constant (Greg Kroah-Hartman)
- Remove unused pci_endpoint_test_bar_{readl,writel} functions
(Jiapeng Chong)
- Rename "BME" to "Bus Master Enable" (Manivannan Sadhasivam)
- Rename struct pci_epc_event_ops.core_init() callback to epc_init()
(Manivannan Sadhasivam)
- Move DMA init to MHI .epc_init() callback for uniformity
(Manivannan Sadhasivam)
- Cancel EPF test delayed work when link goes down (Manivannan
Sadhasivam)
- Add struct pci_epc_event_ops.epc_deinit() callback for cleanup
needed on fundamental reset (Manivannan Sadhasivam)
- Add 64KB alignment to endpoint test to support Rockchip rk3588
(Niklas Cassel)
- Optimize endpoint test by using memcpy() instead of readl() (Niklas
Cassel)
Device tree bindings:
- Add generic "ats-supported" property to advertise that a PCIe Root
Complex supports ATS (Jean-Philippe Brucker)
Amazon Annapurna Labs PCIe controller driver:
- Validate IORESOURCE_BUS presence to avoid NULL pointer dereference
(Aleksandr Mishin)
Axis ARTPEC-6 PCIe controller driver:
- Rename .cpu_addr_fixup() parameter to reflect that it is a PCI
address, not a CPU address (Niklas Cassel)
Freescale i.MX6 PCIe controller driver:
- Convert to agnostic GPIO API (Andy Shevchenko)
Freescale Layerscape PCIe controller driver:
- Make struct mobiveil_rp_ops constant (Christophe JAILLET)
- Use new generic dw_pcie_ep_linkdown() to handle link-down events
(Manivannan Sadhasivam)
HiSilicon Kirin PCIe controller driver:
- Convert to agnostic GPIO API (Andy Shevchenko)
- Use _scoped() iterator for OF children to ensure refcounts are
decremented at loop exit (Javier Carrasco)
Intel VMD host bridge driver:
- Create sysfs "domain" symlink before downstream devices are exposed
to userspace by pci_bus_add_devices() (Jiwei Sun)
Loongson PCIe controller driver:
- Enable MSI when LS7A is used with new CPUs that have integrated
PCIe Root Complex, e.g., Loongson-3C6000, so downstream devices can
use MSI (Huacai Chen)
Microchip AXI PolarFlare PCIe controller driver:
- Move pcie-microchip-host.c to a new PLDA directory (Minda Chen)
- Factor PLDA generic items out to a common
plda,xpressrich3-axi-common.yaml binding (Minda Chen)
- Factor PLDA generic data structures and code out to shared
pcie-plda.h, pcie-plda-host.c (Minda Chen)
- Add PLDA generic interrupt handling with a .request_event_irq()
callback for vendor-specific events (Minda Chen)
- Add PLDA generic host init/deinit and map bus functions for use by
vendor-specific drivers (Minda Chen)
- Rework to use PLDA core (Minda Chen)
Microsoft Hyper-V host bridge driver:
- Return zero, not garbage, when reading PCI_INTERRUPT_PIN (Wei Liu)
NVIDIA Tegra194 PCIe controller driver:
- Remove unused struct tegra_pcie_soc (Dr. David Alan Gilbert)
- Set 64KB inbound ATU alignment restriction (Jon Hunter)
Qualcomm PCIe controller driver:
- Make the MHI reg region mandatory for X1E80100, since all PCIe
controllers have it (Abel Vesa)
- Prevent use of uninitialized data and possible error pointer
dereference (Dan Carpenter)
- Return error, not success, if dev_pm_opp_find_freq_floor() fails
(Dan Carpenter)
- Add Operating Performance Points (OPP) support to scale performance
state based on aggregate link bandwidth to improve SoC power
efficiency (Krishna chaitanya chundru)
- Vote for the CPU-PCIe ICC (interconnect) path to ensure it stays
active even if other drivers don't vote for it (Krishna chaitanya
chundru)
- Use devm_clk_bulk_get_all() to get all the clocks from DT to avoid
writing out all the clock names (Manivannan Sadhasivam)
- Add DT binding and driver support for the SA8775P SoC (Mrinmay
Sarkar)
- Add HDMA support for the SA8775P SoC (Mrinmay Sarkar)
- Override the SA8775P NO_SNOOP default to avoid possible memory
corruption (Mrinmay Sarkar)
- Make sure resources are disabled during PERST# assertion, even if
the link is already disabled (Manivannan Sadhasivam)
- Use new generic dw_pcie_ep_linkdown() to handle link-down events
(Manivannan Sadhasivam)
- Add DT and endpoint driver support for the SA8775P SoC (Mrinmay
Sarkar)
- Add Hyper DMA (HDMA) support for the SA8775P SoC and enable it in
the EPF MHI driver (Mrinmay Sarkar)
- Set PCIE_PARF_NO_SNOOP_OVERIDE to override the default NO_SNOOP
attribute on the SA8775P SoC (both Root Complex and Endpoint mode)
to avoid possible memory corruption (Mrinmay Sarkar)
Renesas R-Car PCIe controller driver:
- Demote WARN() to dev_warn_ratelimited() in rcar_pcie_wakeup() to
avoid unnecessary backtrace (Marek Vasut)
- Add DT and driver support for R-Car V4H (R8A779G0) host and
endpoint. This requires separate proprietary firmware (Yoshihiro
Shimoda)
Rockchip PCIe controller driver:
- Assert PERST# for 100ms after power is stable (Damien Le Moal)
- Wait PCIE_T_RRS_READY_MS (100ms) after reset before starting
configuration (Damien Le Moal)
- Use GPIOD_OUT_LOW flag while requesting ep_gpio to fix a firmware
crash on Qcom-based modems with Rockpro64 board (Manivannan
Sadhasivam)
Rockchip DesignWare PCIe controller driver:
- Factor common parts of rockchip-dw-pcie DT binding to be shared by
Root Complex and Endpoint mode (Niklas Cassel)
- Add missing INTx signals to common DT binding (Niklas Cassel)
- Add eDMA items to DT binding for Endpoint controller (Niklas
Cassel)
- Fix initial dw-rockchip PERST# GPIO value to prevent unnecessary
short assert/deassert that causes issues with some WLAN controllers
(Niklas Cassel)
- Refactor dw-rockchip and add support for Endpoint mode (Niklas
Cassel)
- Call pci_epc_init_notify() and drop dw_pcie_ep_init_notify()
wrapper (Niklas Cassel)
- Add error messages in .probe() error paths to improve user
experience (Uwe Kleine-König)
Samsung Exynos PCIe controller driver:
- Use bulk clock APIs to simplify clock setup (Shradha Todi)
StarFive PCIe controller driver:
- Add DT binding and driver support for the StarFive JH7110
PLDA-based PCIe controller (Minda Chen)
Synopsys DesignWare PCIe controller driver:
- Add generic support for sending PME_Turn_Off when system suspends
(Frank Li)
- Fix incorrect interpretation of iATU slot 0 after PERST#
assert/deassert (Frank Li)
- Use msleep() instead of usleep_range() while waiting for link
(Konrad Dybcio)
- Refactor dw_pcie_edma_find_chip() to enable adding support for
Hyper DMA (HDMA) (Manivannan Sadhasivam)
- Enable drivers to supply the eDMA channel count since some can't
auto detect this (Manivannan Sadhasivam)
- Call pci_epc_init_notify() and drop dw_pcie_ep_init_notify()
wrapper (Manivannan Sadhasivam)
- Pass the eDMA mapping format directly from drivers instead of
maintaining a capability for it (Manivannan Sadhasivam)
- Add generic dw_pcie_ep_linkdown() to notify EPF drivers about
link-down events and restore non-sticky DWC registers lost on link
down (Manivannan Sadhasivam)
- Add vendor-specific "apb" reg name, interrupt names, INTx names to
generic binding (Niklas Cassel)
- Enforce DWC restriction that 64-bit BARs must start with an
even-numbered BAR (Niklas Cassel)
- Consolidate args of dw_pcie_prog_outbound_atu() into a structure
(Yoshihiro Shimoda)
- Add support for endpoints to send Message TLPs, e.g., for INTx
emulation (Yoshihiro Shimoda)
TI DRA7xx PCIe controller driver:
- Rename .cpu_addr_fixup() parameter to reflect that it is a PCI
address, not a CPU address (Niklas Cassel)
TI Keystone PCIe controller driver:
- Validate IORESOURCE_BUS presence to avoid NULL pointer dereference
(Aleksandr Mishin)
- Work around AM65x/DRA80xM Errata #i2037 that corrupts TLPs and
causes processor hangs by limiting Max_Read_Request_Size (MRRS) and
Max_Payload_Size (MPS) (Kishon Vijay Abraham I)
- Leave BAR 0 disabled for AM654x to fix a regression caused by
|
||
|
Linus Torvalds
|
04d17331ca |
Merge tag 'usb-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 6.11-rc1.
Nothing earth-shattering in here, just constant forward progress in
adding support for new hardware and better debugging functionalities
for thunderbolt devices and the subsystem. Included in here are:
- thunderbolt debugging update and driver additions
- xhci driver updates
- typec driver updates
- kselftest device driver changes (acked by the relevant maintainers,
depended on other changes in this tree.)
- cdns3 driver updates
- gadget driver updates
- MODULE_DESCRIPTION() additions
- dwc3 driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (112 commits)
kselftest: devices: Add test to detect device error logs
kselftest: Move ksft helper module to common directory
kselftest: devices: Move discoverable devices test to subdirectory
usb: gadget: f_uac2: fix non-newline-terminated function name
USB: uas: Implement the new shutdown callback
USB: core: add 'shutdown' callback to usb_driver
usb: typec: Drop explicit initialization of struct i2c_device_id::driver_data to 0
usb: dwc3: enable CCI support for AMD-xilinx DWC3 controller
usb: dwc2: add support for other Lantiq SoCs
usb: gadget: Use u16 types for 16-bit fields
usb: gadget: midi2: Fix incorrect default MIDI2 protocol setup
usb: dwc3: core: Check all ports when set phy suspend
usb: typec: tcpci: add support to set connector orientation
dt-bindings: usb: Convert fsl-usb to yaml
usb: typec: ucsi: reorder operations in ucsi_run_command()
usb: typec: ucsi: extract common code for command handling
usb: typec: ucsi: inline ucsi_read_message_in
usb: typec: ucsi: rework command execution functions
usb: typec: ucsi: split read operation
usb: typec: ucsi: simplify command sending API
...
|
||
|
Linus Torvalds
|
aba9753c06 |
Merge tag 'tty-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH: "Here is a small set of tty and serial driver updates for 6.11-rc1. Not much happened this cycle, unlike the previous kernel release which had lots of "excitement" in this part of the kernel. Included in here are the following changes: - dt binding updates for new platforms - 8250 driver updates - various small serial driver fixes and updates - printk/console naming and matching attempt #2 (was reverted for 6.10-final, should be good to go this time around, acked by the relevant maintainers). All of these have been in linux-next for a while with no reported issues" * tag 'tty-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (22 commits) Documentation: kernel-parameters: Add DEVNAME:0.0 format for serial ports serial: core: Add serial_base_match_and_update_preferred_console() printk: Add match_devname_and_update_preferred_console() serial: sc16is7xx: hardware reset chip if reset-gpios is defined in DT dt-bindings: serial: sc16is7xx: add reset-gpios dt-bindings: serial: vt8500-uart: convert to json-schema serial: 8250_platform: Explicitly show we initialise ISA ports only once tty: add missing MODULE_DESCRIPTION() macros dt-bindings: serial: mediatek,uart: add MT7988 serial: sh-sci: Add support for RZ/V2H(P) SoC dt-bindings: serial: Add documentation for Renesas RZ/V2H(P) (R9A09G057) SCIF support dt-bindings: serial: renesas,scif: Make 'interrupt-names' property as required dt-bindings: serial: renesas,scif: Validate 'interrupts' and 'interrupt-names' dt-bindings: serial: renesas,scif: Move ref for serial.yaml at the end riscv: dts: starfive: jh7110: Add the core reset and jh7110 compatible for uarts serial: 8250_dw: Use reset array API to get resets dt-bindings: serial: snps-dw-apb-uart: Add one more reset signal for StarFive JH7110 SoC serial: 8250: Extract platform driver serial: 8250: Extract RSA bits serial: imx: stop casting struct uart_port to struct imx_port ... |
||
|
Linus Torvalds
|
661fb4e68c |
Merge tag 'for-6.11/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- Optimize processing of flush bios in the dm-linear and dm-stripe
targets
- Dm-io cleansups and refactoring
- Remove unused 'struct thunk' in dm-cache
- Handle minor device numbers > 255 in dm-init
- Dm-verity refactoring & enabling platform keyring
- Fix warning in dm-raid
- Improve dm-crypt performance - split bios to smaller pieces, so that
They could be processed concurrently
- Stop using blk_limits_io_{min,opt}
- Dm-vdo cleanup and refactoring
- Remove max_write_zeroes_granularity and max_secure_erase_granularity
- Dm-multipath cleanup & refactoring
- Add dm-crypt and dm-integrity support for non-power-of-2 sector size
- Fix reshape in dm-raid
- Make dm_block_validator const
* tag 'for-6.11/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (33 commits)
dm vdo: fix a minor formatting issue in vdo.rst
dm vdo int-map: fix kerneldoc formatting
dm vdo repair: add missing kerneldoc fields
dm: Constify struct dm_block_validator
dm-integrity: introduce the Inline mode
dm: introduce the target flag mempool_needs_integrity
dm raid: fix stripes adding reshape size issues
dm raid: move _get_reshape_sectors() as prerequisite to fixing reshape size issues
dm-crypt: support for per-sector NVMe metadata
dm mpath: don't call dm_get_device in multipath_message
dm: factor out helper function from dm_get_device
dm-verity: fix dm_is_verity_target() when dm-verity is builtin
dm: Remove max_secure_erase_granularity
dm: Remove max_write_zeroes_granularity
dm vdo indexer: use swap() instead of open coding it
dm vdo: remove unused struct 'uds_attribute'
dm: stop using blk_limits_io_{min,opt}
dm-crypt: limit the size of encryption requests
dm verity: add support for signature verification with platform keyring
dm-raid: Fix WARN_ON_ONCE check for sync_thread in raid_resume
...
|
||
|
Masatake YAMATO
|
7f1c4909a8 |
dm vdo: fix a minor formatting issue in vdo.rst
Signed-off-by: Masatake YAMATO <yamato@redhat.com> Signed-off-by: Matthew Sakai <msakai@redhat.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> |
||
|
Linus Torvalds
|
cf05e93af4 |
Merge tag 'docs-6.11' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"Nothing hugely exciting happening in the documentation tree this time
around, mostly more of the usual:
- More Spanish, Italian, and Chinese translations
- A new script, scripts/checktransupdate.py, can be used to see which
commits have touched an (English) document since a given
translation was last updated.
- A couple of "best practices" suggestions (on Link: tags and
off-list discussions) that were not entirely at consensus level,
but I concluded they were close enough to accept.
- Some nice cleanups removing documentation for kernel parameters
that have not been recognized for ... a long time.
...along with the usual updates, typo fixes, and such"
* tag 'docs-6.11' of git://git.lwn.net/linux: (57 commits)
Documentation: Document user_events ioctl code
docs/pinctrl: fix typo in mapping example
docs: maintainer: discourage taking conversations off-list
docs: driver-model: platform: update the definition of platform_driver
docs/sp_SP: Add translation for scheduler/sched-design-CFS.rst
writing_musb_glue_layer.rst: Fix broken URL
zh_CN/admin-guide: one typo fix
docs/zh_CN/virt: Update the translation of guest-halt-polling.rst
Documentation: add reference from dynamic debug to loglevel kernel params
Documentation: best practices for using Link trailers
Documentation: fix links to mailing list services
Documentation: exception-tables.rst: Fix the wrong steps referenced
docs/zh_CN: add process/researcher-guidelines Chinese translation
Documentation/tools/rv: fix document header
docs/sp_SP: Add translation of process/maintainer-kvm-x86.rst
docs/admin-guide/mm: correct typo 'quired' to 'queried'
Add libps2 to the input section of driver-api
Docs/mm/index: move allocation profiling document to unsorted documents chapter
Docs/mm/index: rename 'Legacy Documentation' to 'Unsorted Documentation'
Docs/mm/index: Remove 'Memory Management Guide' chapter marker
...
|
||
|
Linus Torvalds
|
b2fc97c186 |
Merge tag 'memblock-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport: - 'reserve_mem' command line parameter to allow creation of named memory reservation at boot time. The driving use-case is to improve the ability of pstore to retain ramoops data across reboots. - cleanups and small improvements in memblock and mm_init - new tests cases in memblock test suite * tag 'memblock-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: memblock tests: fix implicit declaration of function 'numa_valid_node' memblock: Move late alloc warning down to phys alloc pstore/ramoops: Add ramoops.mem_name= command line option mm/memblock: Add "reserve_mem" to reserved named memory at boot up mm/mm_init.c: don't initialize page->lru again mm/mm_init.c: not always search next deferred_init_pfn from very beginning mm/mm_init.c: use deferred_init_mem_pfn_range_in_zone() to decide loop condition mm/mm_init.c: get the highest zone directly mm/mm_init.c: move nr_initialised reset down a bit mm/memblock: fix a typo in description of for_each_mem_region() mm/mm_init.c: use memblock_region_memory_base_pfn() to get startpfn mm/memblock: use PAGE_ALIGN_DOWN to get pgend in free_memmap mm/memblock: return true directly on finding overlap region memblock tests: add memblock_overlaps_region_checks mm/memblock: fix comment for memblock_isolate_range() memblock tests: add memblock_reserve_many_may_conflict_check() memblock tests: add memblock_reserve_all_locations_check() mm/memblock: remove empty dummy entry |
||
|
Linus Torvalds
|
b1bc554e00 |
Merge tag 'media/v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab: - New sensor drivers: gc05a2, gc08a3 and imx283 - New serializer/deserializer drivers: max96714 and max96717 - New JPEG encoder driver: e5010 - Support for Raspberry Pi PiSP Backend (BE) ISP driver - Old documentation for av7110 driver removed, as a new version was added as Documentation/userspace-api/media/dvb/legacy*.rst - atompisp: Linux firmwares are now available, so drop firmware-related task from TODO and update firmware logic - The imx258 driver has gained several improvements - wave5 driver has gained support for HEVC decoding - em28xx gained support for MyGica UTV3 - av7110 budget-patch driver removed - Lots of other cleanups, improvements and fixes * tag 'media/v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (301 commits) media: raspberrypi: Switch to remove_new media: uapi: pisp_be_config: Add extra config fields media: uapi: pisp_be_config: Re-sort pisp_be_tiles_config media: uapi: pisp_common: Capitalize all macros media: uapi: pisp_common: Add 32 bpp format test media: uapi: pisp_be_config: Drop BIT() from uAPI media: stm32: dcmipp: correct error handling in dcmipp_create_subdevs media: atomisp: Fix spelling mistakes in sh_css_sp.c media: atomisp: Fix spelling mistake in ia_css_debug.c media: atomisp: Fix spelling mistake in hmm_bo.c media: atomisp: Fix spelling mistake in ia_css_eed1_8.host.c media: atomisp: Fix spelling mistake in sh_css_internal.h media: atomisp: Fix spelling mistake "pipline" -> "pipeline" media: atomisp: Remove unused GPIO related defines and APIs media: atomisp: Replace COMPILATION_ERROR_IF() by static_assert() media: atomisp: Clean up unused macros from math_support.h media: atomisp: csi2-bridge: Add DMI quirk for OV5693 on Xiaomi Mipad2 media: atomisp: Update TODO media: atomisp: Prefix firmware paths with "intel/ipu/" media: atomisp: Remove firmware_name module parameter ... |
||
|
Linus Torvalds
|
a5cb6b2bbf |
Merge tag 'platform-drivers-x86-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen: - amd/pmf: Report system state changes using existing input events - asus-wmi: Zenbook 2023 camera LED disable support and fix TUF laptop keyboard RGB LED sysfs interface - dell-pc: Fan modes / platform profile support - hp-wmi: Fix platform profile switching on Omen/Victus laptops - intel/ISST: Use only TPMI interface when TPMI and legacy interfaces are available - intel/pmc: LTR restore support to pair with LTR ignore - intel/tpmi: Performance Limit Reasons (PLR) and APIC <-> Punit CPU numbering mapping support - WMI: driver override support and docs improvements - lenovo-yoga-c630: Support for EC (platform/arm64) - platform/arm64: Fix build with COMPILE_TEST (broke after addition of C630) - tools: Intel Speed Select Turbo Ratio Limit fix - Miscellaneous cleanups / refactoring / improvements * tag 'platform-drivers-x86-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (65 commits) platform/x86: asus-wmi: fix TUF laptop RGB variant platform/x86/intel/tpmi/plr: Fix output in plr_print_bits() Docs/admin-guide: Remove pmf leftover reference from the index platform/x86: ideapad-laptop: use cleanup.h platform/x86: hp-wmi: Fix implementation of the platform_profile_omen_get function platform: arm64: EC_LENOVO_YOGA_C630 should depend on ARCH_QCOM platform: arm64: EC_ACER_ASPIRE1 should depend on ARCH_QCOM platform/x86/amd/pmf: Remove update system state document platform/x86/amd/pmf: Use existing input event codes to update system states platform/x86: hp-wmi: Fix platform profile option switch bug on Omen and Victus laptops platform/x86:intel/pmc: Add support to undo ltr_ignore platform/x86:intel/pmc: Use the Elvis operator platform/x86:intel/pmc: Use DEFINE_SHOW_STORE_ATTRIBUTE macro platform/x86:intel/pmc: Remove unneeded min_t check platform/x86:intel/pmc: Add support to show ltr_ignore value platform/x86:intel/pmc: Move pmc assignment closer to first usage platform/x86:intel/pmc: Convert index variables to be unsigned platform/x86:intel/pmc: Simplify mutex usage with cleanup helpers platform/x86:intel/pmc: Use the return value of pmc_core_send_msg tools/power/x86/intel-speed-select: v1.20 release ... |
||
|
Linus Torvalds
|
4a996d90b9 |
Merge tag 'sched-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar: - Update Daniel Bristot de Oliveira's entry in MAINTAINERS, and credit him in CREDITS - Harmonize the lock-yielding behavior on dynamically selected preemption models with static ones - Reorganize the code a bit: split out sched/syscalls.c to reduce the size of sched/core.c - Micro-optimize psi_group_change() - Fix set_load_weight() for SCHED_IDLE tasks - Misc cleanups & fixes * tag 'sched-core-2024-07-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Update MAINTAINERS and CREDITS sched/fair: set_load_weight() must also call reweight_task() for SCHED_IDLE tasks sched/psi: Optimise psi_group_change a bit sched/core: Drop spinlocks on contention iff kernel is preemptible sched/core: Move preempt_model_*() helpers from sched.h to preempt.h sched/balance: Skip unnecessary updates to idle load balancer's flags idle: Remove stale RCU comment sched/headers: Move struct pre-declarations to the beginning of the header sched/core: Clean up kernel/sched/sched.h a bit sched/core: Simplify prefetch_curr_exec_start() sched: Fix spelling in comments sched/syscalls: Split out kernel/sched/syscalls.c from kernel/sched/core.c |
||
|
Linus Torvalds
|
41906248d0 |
Merge tag 'pm-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"These add a new cpufreq driver for Loongson-3, add support for new
features in the intel_pstate (Lunar Lake and Arrow Lake platforms, OOB
mode for Emerald Rapids, highest performance change interrupt),
amd-pstate (fast CPPC) and sun50i (Allwinner H700 speed bin) cpufreq
drivers, simplify the cpufreq driver interface, simplify the teo
cpuidle governor, adjust the pm-graph utility for a new version of
Python, address issues and clean up code.
Specifics:
- Add Loongson-3 CPUFreq driver support (Huacai Chen)
- Add support for the Arrow Lake and Lunar Lake platforms and the
out-of-band (OOB) mode on Emerald Rapids to the intel_pstate
cpufreq driver, make it support the highest performance change
interrupt and clean it up (Srinivas Pandruvada)
- Switch cpufreq to new Intel CPU model defines (Tony Luck)
- Simplify the cpufreq driver interface by switching the .exit()
driver callback to the void return data type (Lizhe, Viresh Kumar)
- Make cpufreq_boost_enabled() return bool (Dhruva Gole)
- Add fast CPPC support to the amd-pstate cpufreq driver, address
multiple assorted issues in it and clean it up (Perry Yuan, Mario
Limonciello, Dhananjay Ugwekar, Meng Li, Xiaojian Du)
- Add Allwinner H700 speed bin to the sun50i cpufreq driver (Ryan
Walklin)
- Fix memory leaks and of_node_put() usage in the sun50i and
qcom-nvmem cpufreq drivers (Javier Carrasco)
- Clean up the sti and dt-platdev cpufreq drivers (Jeff Johnson,
Raphael Gallais-Pou)
- Fix deferred probe handling in the TI cpufreq driver and wrong
return values of ti_opp_supply_probe(), and add OPP tables for the
AM62Ax and AM62Px SoCs to it (Bryan Brattlof, Primoz Fiser)
- Avoid overflow of target_freq in .fast_switch() in the SCMI cpufreq
driver (Jagadeesh Kona)
- Use dev_err_probe() in every error path in probe in the Mediatek
cpufreq driver (Nícolas Prado)
- Fix kernel-doc param for longhaul_setstate in the longhaul cpufreq
driver (Yang Li)
- Fix system resume handling in the CPPC cpufreq driver (Riwen Lu)
- Improve the teo cpuidle governor and clean up leftover comments
from the menu cpuidle governor (Christian Loehle)
- Clean up a comment typo in the teo cpuidle governor (Atul Kumar
Pant)
- Add missing MODULE_DESCRIPTION() macro to cpuidle haltpoll (Jeff
Johnson)
- Switch the intel_idle driver to new Intel CPU model defines (Tony
Luck)
- Switch the Intel RAPL driver new Intel CPU model defines (Tony
Luck)
- Simplify if condition in the idle_inject driver (Thorsten Blum)
- Fix missing cleanup on error in _opp_attach_genpd() (Viresh Kumar)
- Introduce an OF helper function to inform if required-opps is used
and drop a redundant in-parameter to _set_opp_level() (Ulf Hansson)
- Update pm-graph to v5.12 which includes fixes and major code revamp
for python3.12 (Todd Brandt)
- Address several assorted issues in the cpupower utility (Roman
Storozhenko)"
* tag 'pm-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (77 commits)
cpufreq: sti: fix build warning
cpufreq: mediatek: Use dev_err_probe in every error path in probe
cpufreq: Add Loongson-3 CPUFreq driver support
cpufreq: Make cpufreq_driver->exit() return void
cpufreq/amd-pstate: Fix the scaling_max_freq setting on shared memory CPPC systems
cpufreq/amd-pstate-ut: Convert nominal_freq to khz during comparisons
cpufreq: pcc: Remove empty exit() callback
cpufreq: loongson2: Remove empty exit() callback
cpufreq: nforce2: Remove empty exit() callback
cpupower: fix lib default installation path
cpufreq: docs: Add missing scaling_available_frequencies description
cpuidle: teo: Don't count non-existent intercepts
cpupower: Disable direct build of the 'bench' subproject
cpuidle: teo: Remove recent intercepts metric
Revert: "cpuidle: teo: Introduce util-awareness"
cpufreq: make cpufreq_boost_enabled() return bool
cpufreq: intel_pstate: Support highest performance change interrupt
x86/cpufeatures: Add HWP highest perf change feature flag
Documentation: cpufreq: amd-pstate: update doc for Per CPU boost control method
cpufreq: amd-pstate: Cap the CPPC.max_perf to nominal_perf if CPB is off
...
|
||
|
Linus Torvalds
|
f83e38fc9f |
Merge tag 'for-linus-6.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross: - some trivial cleanups - a fix for the Xen timer - add boot time selectable debug capability to the Xen multicall handling - two fixes for the recently added Xen irqfd handling * tag 'for-linus-6.11-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: remove deprecated xen_nopvspin boot parameter x86/xen: eliminate some private header files x86/xen: make some functions static xen: make multicall debug boot time selectable xen/arm: Convert comma to semicolon xen: privcmd: Fix possible access to a freed kirqfd instance xen: privcmd: Switch from mutex to spinlock for irqfds xen: add missing MODULE_DESCRIPTION() macros x86/xen: Convert comma to semicolon x86/xen/time: Reduce Xen timer tick xen/manage: Constify struct shutdown_handler |
||
|
Linus Torvalds
|
e55037c879 |
Merge tag 'efi-next-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"Note the removal of the EFI fake memory map support - this is believed
to be unused and no longer worth supporting. However, we could easily
bring it back if needed.
With recent developments regarding confidential VMs and unaccepted
memory, combined with kexec, creating a known inaccurate view of the
firmware's memory map and handing it to the OS is a feature we can
live without, hence the removal. Alternatively, I could imagine making
this feature mutually exclusive with those confidential VM related
features, but let's try simply removing it first.
Summary:
- Drop support for the 'fake' EFI memory map on x86
- Add an SMBIOS based tweak to the EFI stub instructing the firmware
on x86 Macbook Pros to keep both GPUs enabled
- Replace 0-sized array with flexible array in EFI memory attributes
table handling
- Drop redundant BSS clearing when booting via the native PE
entrypoint on x86
- Avoid returning EFI_SUCCESS when aborting on an out-of-memory
condition
- Cosmetic tweak for arm64 KASLR loading logic"
* tag 'efi-next-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Replace efi_memory_attributes_table_t 0-sized array with flexible array
efi: Rename efi_early_memdesc_ptr() to efi_memdesc_ptr()
arm64/efistub: Clean up KASLR logic
x86/efistub: Drop redundant clearing of BSS
x86/efistub: Avoid returning EFI_SUCCESS on error
x86/efistub: Call Apple set_os protocol on dual GPU Intel Macs
x86/efistub: Enable SMBIOS protocol handling for x86
efistub/smbios: Simplify SMBIOS enumeration API
x86/efi: Drop support for fake EFI memory maps
|
||
|
Paolo Bonzini
|
1c5a0b55ab |
Merge tag 'kvmarm-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.11 - Initial infrastructure for shadow stage-2 MMUs, as part of nested virtualization enablement - Support for userspace changes to the guest CTR_EL0 value, enabling (in part) migration of VMs between heterogenous hardware - Fixes + improvements to pKVM's FF-A proxy, adding support for v1.1 of the protocol - FPSIMD/SVE support for nested, including merged trap configuration and exception routing - New command-line parameter to control the WFx trap behavior under KVM - Introduce kCFI hardening in the EL2 hypervisor - Fixes + cleanups for handling presence/absence of FEAT_TCRX - Miscellaneous fixes + documentation updates |
||
|
Ilpo Järvinen
|
9d20c0535e |
Docs/admin-guide: Remove pmf leftover reference from the index
pmf.rst was removed by the commit
|
||
|
Linus Torvalds
|
2439a5eaa7 |
Merge tag 'x86_bugs_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu mitigation updates from Borislav Petkov: - Add a spectre_bhi=vmexit mitigation option aimed at cloud environments - Remove duplicated Spectre cmdline option documentation - Add separate macro definitions for syscall handlers which do not return in order to address objtool warnings * tag 'x86_bugs_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/bugs: Add 'spectre_bhi=vmexit' cmdline option x86/bugs: Remove duplicate Spectre cmdline option descriptions x86/syscall: Mark exit[_group] syscall handlers __noreturn |
||
|
Linus Torvalds
|
181a984b7d |
Merge tag 'x86_cleanups_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov: - Remove an unused function and the documentation of an already removed cmdline parameter * tag 'x86_cleanups_for_v6.11_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Remove unused function __fortify_panic() Documentation: Remove "mfgpt_irq=" from the kernel-parameters.txt file |
||
|
Linus Torvalds
|
b3c0eccb48 |
Merge tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"The majority of added lines are two new modules: the GPIO virtual
consumer module that improves our ability to add automated tests for
the kernel API and the "sloppy" logic analyzer module that uses the
GPIO API to implement a coarse-grained debugging tool for useful for
remote development.
Other than that we have the usual assortment of various driver
extensions, improvements to the core GPIO code, DT-bindings and other
documentation updates as well as an extension to the interrupt
simulator:
GPIOLIB core:
- rework kfifo handling rework in the character device code
- improve the labeling of GPIOs requested as interrupts and show more
info on interrupt-only GPIOs in debugfs
- remove unused APIs
- unexport interfaces that are only used from the core GPIO code
- drop the return value from gpiochip_set_desc_names() as it cannot
fail
- move a string array definition out of a header and into a specific
compilation unit
- convert the last user of gpiochip_get_desc() other than GPIO core
to using a safer alternative
- use array_index_nospec() where applicable
New drivers:
- add a "virtual GPIO consumer" module that allows requesting GPIOs
from actual hardware and driving tests of the in-kernel GPIO API
from user-space over debugfs
- add a GPIO-based "sloppy" logic analyzer module useful for "first
glance" debugging on remote boards
Driver improvements:
- add support for a new model to gpio-pca953x
- lock GPIOs as interrupts in gpio-sim when the lines are requested
as irqs via the simulator domain + some other minor improvements
- improve error reporting in gpio-syscon
- convert gpio-ath79 to using dynamic GPIO base and range
- use pcibios_err_to_errno() for converting PCIBIOS error codes to
errno vaues in gpio-amd8111 and gpio-rdc321x
- allow building gpio-brcmstb for the BCM2835 architecture
DT bindings:
- convert DT bindings for lsi,zevio, mpc8xxx, and atmel to DT schema
- document new properties for aspeed,gpio, fsl,qoriq-gpio and
gpio-vf610
- document new compatibles for pca953x and fsl,qoriq-gpio
Documentation:
- document stricter behavior of the GPIO character device uAPI with
regards to reconfiguring requested line without direction set
- clarify the effect of the active-low flag on line values and edges
- remove documentation for the legacy GPIO API in order to stop
tempting people to use it
- document the preference for using pread() for reading edge events
in the sysfs API
Other:
- add an extended initializer to the interrupt simulator allowing to
specify a number of callbacks callers can use to be notified about
irqs being requested and released"
* tag 'gpio-updates-for-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (41 commits)
gpio: mc33880: Convert comma to semicolon
gpio: virtuser: actually use the "trimmed" local variable
dt-bindings: gpio: convert Atmel GPIO to json-schema
gpio: virtuser: new virtual testing driver for the GPIO API
dt-bindings: gpio: vf610: Allow gpio-line-names to be set
gpio: sim: lock GPIOs as interrupts when they are requested
genirq/irq_sim: add an extended irq_sim initializer
dt-bindings: gpio: fsl,qoriq-gpio: Add compatible string fsl,ls1046a-gpio
gpiolib: unexport gpiochip_get_desc()
gpio: add sloppy logic analyzer using polling
Documentation: gpio: Reconfiguration with unset direction (uAPI v2)
Documentation: gpio: Reconfiguration with unset direction (uAPI v1)
dt-bindings: gpio: fsl,qoriq-gpio: add common property gpio-line-names
gpio: ath79: convert to dynamic GPIO base allocation
pinctrl: da9062: replace gpiochip_get_desc() with gpio_device_get_desc()
gpiolib: put gpio_suffixes in a single compilation unit
Documentation: gpio: Clarify effect of active low flag on line edges
Documentation: gpio: Clarify effect of active low flag on line values
gpiolib: Remove data-less gpiochip_add() function
gpio: sim: use devm_mutex_init()
...
|
||
|
Linus Torvalds
|
c89d780cc1 |
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The biggest part is the virtual CPU hotplug that touches ACPI,
irqchip. We also have some GICv3 optimisation for pseudo-NMIs that has
been queued via the arm64 tree. Otherwise the usual perf updates,
kselftest, various small cleanups.
Core:
- Virtual CPU hotplug support for arm64 ACPI systems
- cpufeature infrastructure cleanups and making the FEAT_ECBHB ID
bits visible to guests
- CPU errata: expand the speculative SSBS workaround to more CPUs
- GICv3, use compile-time PMR values: optimise the way regular IRQs
are masked/unmasked when GICv3 pseudo-NMIs are used, removing the
need for a static key in fast paths by using a priority value
chosen dynamically at boot time
ACPI:
- 'acpi=nospcr' option to disable SPCR as default console for arm64
- Move some ACPI code (cpuidle, FFH) to drivers/acpi/arm64/
Perf updates:
- Rework of the IMX PMU driver to enable support for I.MX95
- Enable support for tertiary match groups in the CMN PMU driver
- Initial refactoring of the CPU PMU code to prepare for the fixed
instruction counter introduced by Arm v9.4
- Add missing PMU driver MODULE_DESCRIPTION() strings
- Hook up DT compatibles for recent CPU PMUs
Kselftest updates:
- Kernel mode NEON fp-stress
- Cleanups, spelling mistakes
Miscellaneous:
- arm64 Documentation update with a minor clarification on TBI
- Fix missing IPI statistics
- Implement raw_smp_processor_id() using thread_info rather than a
per-CPU variable (better code generation)
- Make MTE checking of in-kernel asynchronous tag faults conditional
on KASAN being enabled
- Minor cleanups, typos"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (69 commits)
selftests: arm64: tags: remove the result script
selftests: arm64: tags_test: conform test to TAP output
perf: add missing MODULE_DESCRIPTION() macros
arm64: smp: Fix missing IPI statistics
irqchip/gic-v3: Fix 'broken_rdists' unused warning when !SMP and !ACPI
ACPI: Add acpi=nospcr to disable ACPI SPCR as default console on ARM64
Documentation: arm64: Update memory.rst for TBI
arm64/cpufeature: Replace custom macros with fields from ID_AA64PFR0_EL1
KVM: arm64: Replace custom macros with fields from ID_AA64PFR0_EL1
perf: arm_pmuv3: Include asm/arm_pmuv3.h from linux/perf/arm_pmuv3.h
perf: arm_v6/7_pmu: Drop non-DT probe support
perf/arm: Move 32-bit PMU drivers to drivers/perf/
perf: arm_pmuv3: Drop unnecessary IS_ENABLED(CONFIG_ARM64) check
perf: arm_pmuv3: Avoid assigning fixed cycle counter with threshold
arm64: Kconfig: Fix dependencies to enable ACPI_HOTPLUG_CPU
perf: imx_perf: add support for i.MX95 platform
perf: imx_perf: fix counter start and config sequence
perf: imx_perf: refactor driver for imx93
perf: imx_perf: let the driver manage the counter usage rather the user
perf: imx_perf: add macro definitions for parsing config attr
...
|
||
|
Linus Torvalds
|
895b9b1207 |
Merge tag 'cgroup-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo: - Added Michal Koutný as a maintainer - Counters in pids.events were behaving inconsistently. pids.events made properly hierarchical and pids.events.local added - misc.peak and misc.events.local added - cpuset remote partition creation and cpuset.cpus.exclusive handling improved - Code cleanups, non-critical fixes, doc updates - for-6.10-fixes is merged in to receive two non-critical fixes that didn't trigger pull * tag 'cgroup-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (23 commits) cgroup: Add Michal Koutný as a maintainer cgroup/misc: Introduce misc.events.local cgroup/rstat: add force idle show helper cgroup: Protect css->cgroup write under css_set_lock cgroup/misc: Introduce misc.peak cgroup_misc: add kernel-doc comments for enum misc_res_type cgroup/cpuset: Prevent UAF in proc_cpuset_show() selftest/cgroup: Update test_cpuset_prs.sh to match changes cgroup/cpuset: Make cpuset.cpus.exclusive independent of cpuset.cpus cgroup/cpuset: Delay setting of CS_CPU_EXCLUSIVE until valid partition selftest/cgroup: Fix test_cpuset_prs.sh problems reported by test robot cgroup/cpuset: Fix remote root partition creation problem cgroup: avoid the unnecessary list_add(dying_tasks) in cgroup_exit() cgroup/cpuset: Optimize isolated partition only generate_sched_domains() calls cgroup/cpuset: Reduce the lock protecting CS_SCHED_LOAD_BALANCE kernel/cgroup: cleanup cgroup_base_files when fail to add cgroup_psi_files selftests: cgroup: Add basic tests for pids controller selftests: cgroup: Lexicographic order in Makefile cgroup/pids: Add pids.events.local cgroup/pids: Make event counters hierarchical ... |
||
|
Linus Torvalds
|
9855e87328 |
Merge tag 'rcu.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU updates from Paul McKenney: - Update Tasks RCU and Tasks Rude RCU description in Requirements.rst and clarify rcu_assign_pointer() and rcu_dereference() ordering properties - Add lockdep assertions for RCU readers, limit inline wakeups for callback-bypass synchronize_rcu(), add an rcutree.nohz_full_patience_delay to reduce nohz_full OS jitter, add Uladzislau Rezki as RCU maintainer, and fix a subtle callback-migration memory-ordering issue - Remove a number of redundant memory barriers - Remove unnecessary bypass-list lock-contention mitigation, use parking API instead of open-coded ad-hoc equivalent, and upgrade obsolete comments - Revert avoidance of a deadlock that can no longer occur and properly synchronize Tasks Trace RCU checking of runqueues - Add tests for handling of double-call_rcu() bug, add missing MODULE_DESCRIPTION, and add a script that histograms the number of calls to RCU updaters - Fill out SRCU polled-grace-period API * tag 'rcu.2024.07.12a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (29 commits) rcu: Fix rcu_barrier() VS post CPUHP_TEARDOWN_CPU invocation rcu: Eliminate lockless accesses to rcu_sync->gp_count MAINTAINERS: Add Uladzislau Rezki as RCU maintainer rcu: Add rcutree.nohz_full_patience_delay to reduce nohz_full OS jitter rcu/exp: Remove redundant full memory barrier at the end of GP rcu: Remove full memory barrier on RCU stall printout rcu: Remove full memory barrier on boot time eqs sanity check rcu/exp: Remove superfluous full memory barrier upon first EQS snapshot rcu: Remove superfluous full memory barrier upon first EQS snapshot rcu: Remove full ordering on second EQS snapshot srcu: Fill out polled grace-period APIs srcu: Update cleanup_srcu_struct() comment srcu: Add NUM_ACTIVE_SRCU_POLL_OLDSTATE srcu: Disable interrupts directly in srcu_gp_end() rcu: Disable interrupts directly in rcu_gp_init() rcu/tree: Reduce wake up for synchronize_rcu() common case rcu/tasks: Fix stale task snaphot for Tasks Trace tools/rcu: Add rcu-updaters.sh script rcutorture: Add missing MODULE_DESCRIPTION() macros rcutorture: Fix rcu_torture_fwd_cb_cr() data race ... |
||
|
Tejun Heo
|
9283ff5be1 | Merge branch 'for-6.10-fixes' into for-6.11 | ||
|
Steve French
|
d2346e2836 |
cifs: fix setting SecurityFlags to true
If you try to set /proc/fs/cifs/SecurityFlags to 1 it will set them to CIFSSEC_MUST_NTLMV2 which no longer is relevant (the less secure ones like lanman have been removed from cifs.ko) and is also missing some flags (like for signing and encryption) and can even cause mount to fail, so change this to set it to Kerberos in this case. Also change the description of the SecurityFlags to remove mention of flags which are no longer supported. Cc: stable@vger.kernel.org Reviewed-by: Shyam Prasad N <sprasad@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
Ryan Roberts
|
63d9866ab0 |
mm: shmem: rename mTHP shmem counters
The legacy PMD-sized THP counters at /proc/vmstat include thp_file_alloc,
thp_file_fallback and thp_file_fallback_charge, which rather confusingly
refer to shmem THP and do not include any other types of file pages. This
is inconsistent since in most other places in the kernel, THP counters are
explicitly separated for anon, shmem and file flavours. However, we are
stuck with it since it constitutes a user ABI.
Recently, commit
|
||
|
Ran Xiaokai
|
4c8763e84a |
kpageflags: detect isolated KPF_THP folios
When folio is isolated, the PG_lru bit is cleared. So the PG_lru check in stable_page_flags() will miss this kind of isolated folios. Use folio_test_large_rmappable() instead to also include isolated folios. Since pagecache supports large folios and the introduction of mTHP, the semantics of KPF_THP have been expanded, now it indicates not only PMD-sized THP. Update related documentation to clearly state that KPF_THP indicates multiple order THPs. [ran.xiaokai@zte.com.cn: directly use is_zero_folio(), per David] Link: https://lkml.kernel.org/r/20240708062601.165215-1-ranxiaokai627@163.com Link: https://lkml.kernel.org/r/20240705104343.112680-1-ranxiaokai627@163.com Signed-off-by: Ran Xiaokai <ran.xiaokai@zte.com.cn> Acked-by: David Hildenbrand <david@redhat.com> Cc: Andrei Vagin <avagin@google.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Muhammad Usama Anjum <usama.anjum@collabora.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Svetly Todorov <svetly.todorov@memverge.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Ryan Roberts
|
00f5810420 |
mm: fix khugepaged activation policy
Since the introduction of mTHP, the docuementation has stated that
khugepaged would be enabled when any mTHP size is enabled, and disabled
when all mTHP sizes are disabled. There are 2 problems with this; 1.
this is not what was implemented by the code and 2. this is not the
desirable behavior.
Desirable behavior is for khugepaged to be enabled when any PMD-sized THP
is enabled, anon or file. (Note that file THP is still controlled by the
top-level control so we must always consider that, as well as the PMD-size
mTHP control for anon). khugepaged only supports collapsing to PMD-sized
THP so there is no value in enabling it when PMD-sized THP is disabled.
So let's change the code and documentation to reflect this policy.
Further, per-size enabled control modification events were not previously
forwarded to khugepaged to give it an opportunity to start or stop.
Consequently the following was resulting in khugepaged eroneously not
being activated:
echo never > /sys/kernel/mm/transparent_hugepage/enabled
echo always > /sys/kernel/mm/transparent_hugepage/hugepages-2048kB/enabled
[ryan.roberts@arm.com: v3]
Link: https://lkml.kernel.org/r/20240705102849.2479686-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20240705102849.2479686-1-ryan.roberts@arm.com
Link: https://lkml.kernel.org/r/20240704091051.2411934-1-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Fixes:
|