If the streamoff call was triggered by some previous disconnect
or userspace application shutdown the uvc_function_setup_continue
should not be called and the state should not be overwritten.
For this situation the set_alt(0) was never called and the streaming ep
has no USB_GADGET_DELAYED_STATUS pending.
Since the state then was already updated before we also omit the state
update.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20240403-uvc_request_length_by_interval-v7-9-e224bb1035f0@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Compressed formats generate content depending amount of data that is set
in the vb2 buffer by the payload_size. When streaming those formats it
is better to scatter that smaller data over all requests. This patch is
doing that by introducing the calculated req_payload_size which is
updated by each frame. It the uses this amount of data to fill the
isoc requests instead of the video->req_size.
For uncompressed formats it will not make a difference since the payload
size will be equal to the imagesize. Therefore the code will have no
effecta as req_payload_size will be equal to req_size.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20240403-uvc_request_length_by_interval-v7-6-e224bb1035f0@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch is removing the initial imprecise and limited calculation of
requests needed to be used from the queue_setup callback. It instead
introduces the uvc_video_prep_requests function which is called
immediately before the request allocation.
With the information of the usb frame interval length it is possible to
calculate the number of requests needed during one frame duration.
Based on the calculated number of requests and the imagesize we
calculate the actual size per request. This calculation has the benefit
that the frame data is equally distributed over all allocated requests.
When the req_size is not in the range for the actually configured
max_req_size configured for the overall bandwidth we fallback
to use the max_req_size instead.
Since this calculations are only important for isoc transfers we just
use max_request_size for bulk and skip it.
As video->req_size will be recalculated on every video_enable resetting
it to 0 is not necessary anymore.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20240403-uvc_request_length_by_interval-v7-5-e224bb1035f0@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We install an kthread with pfifo priority that is iterating over all
prepared requests and keeps the isoc queue busy. This way it will be
scheduled with the same priority as the interrupt handler.
As the kthread is triggered with video_enable it will immediately
queue some zero length requests into the hw if there is no buffer data
available. It also watches the level of needed zero length requests in
the hardware not to fall under the UVCG_REQ_MAX_ZERO_COUNT threshold.
This way we can drop the function uvc_video_ep_queue_initial_requests
entirely.
By using the kthread to do the actual request handling the interrupt
handler will not be running into the time consuming and eventually
locking work of actually enqueueing the requests back into its own
pipeline. This work can now even be scheduled on another cpu.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20240403-uvc_request_length_by_interval-v7-3-e224bb1035f0@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The complete handler will at least be called after 16 requests have
completed, but will still handle all finisher requests. Since we have
to maintain a costant filling in the isoc queue we ensure this by
adding zero length requests.
By counting the amount enqueued requests we can ensure that the queue is
never underrun and only need to get active if the queue is running
critical. This patch is setting 32 as the critical level, which
is twice the request amount that is needed to create interrupts.
To properly solve the amount of zero length requests that needs to
be held in the hardware after one interrupt needs to be measured
and depends on the runtime of the first enqueue run after the interrupt
triggered. For now we just use twice the amount of requests between an
interrupt.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20240403-uvc_request_length_by_interval-v7-2-e224bb1035f0@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for frame-based frame format, which can be used to support
multiple formats like H264 or H265, in addition to MJPEG and YUV frames.
The frame-based format is set to H264 by default, but it can be updated
to other formats by modifying the GUID through the guid configfs
attribute. Different structures are used for all three formats, as
H264 has a different structure compared to MJPEG and uncompressed
formats. These structures will be passed to the frame make function
based on the active format, using a common frame structure with
additional parameters needed only for frame-based formats. These
parameters are handled at runtime in the UVC driver.
Signed-off-by: Akash Kumar <quic_akakum@quicinc.com>
Link: https://lore.kernel.org/r/20240927152138.31416-1-quic_akakum@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The configfs store callback should return the number of bytes consumed
not the total number of bytes we actually stored. These could differ if
for example the passed in string had a newline we did not store.
If the returned value does not match the number of bytes written the
writer might assume a failure or keep trying to write the remaining bytes.
For example the following command will hang trying to write the final
newline over and over again (tested on bash 2.05b):
echo foo > function_name
Fixes: 993a44fa85 ("usb: gadget: f_uac2: allow changing interface name via configfs")
Cc: stable <stable@kernel.org>
Signed-off-by: Kevin Groeneveld <kgroeneveld@lenbrook.com>
Link: https://lore.kernel.org/r/20241006232637.4267-1-kgroeneveld@lenbrook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
no_llseek had been defined to NULL two years ago, in commit 868941b144
("fs: remove no_llseek")
To quote that commit,
At -rc1 we'll need do a mechanical removal of no_llseek -
git grep -l -w no_llseek | grep -v porting.rst | while read i; do
sed -i '/\<no_llseek\>/d' $i
done
would do it.
Unfortunately, that hadn't been done. Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
.llseek = no_llseek,
so it's obviously safe.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The bInterfaceProtocol is hardcoded to USB_CDC_ACM_PROTO_AT_V25TER. This
will lead to problems with ModemManger which will gladly try to probe
that port as a modem if the gadget also has a network function.
ModemManager will try to send AT commands to the ACM port. Make the
bInterfaceProtocol configurable. For this, track the number of instances
and only allow write to the property if there are no intances (yet).
This will also set bFunctionProtocol to the same value, see commit
5c8db070b4 ("USB: Change acm_iad_descriptor bFunctionProtocol to
USB_CDC_ACM_PROTO_AT_V25TER") for more details.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Link: https://lore.kernel.org/r/20240825180446.3757073-1-mwalle@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since commit "6acba0345b68 usb:gadget:uvc Do not use worker thread to pump
isoc usb requests", pump work could only be queued in uvc_video_complete()
and uvc_v4l2_qbuf(). If VIDIOC_QBUF is executed before VIDIOC_STREAMON,
we can only depend on uvc_video_complete() to queue pump work. However,
this requires some free requests in req_ready list. If req_ready list is
empty all the time, pump work will never be queued and video datas will
never be pumped to usb controller. Actually, this situation could happen
when run uvc-gadget with static image:
$ ./uvc-gadget -i 1080p.jpg uvc.0
When capture image from this device, the user app will always block there.
The issue is uvc driver has queued video buffer before streamon, but the
req_ready list is empty all the time after streamon. This will queue pump
work in uvcg_video_enable() to fill some request to req_ready list so the
uvc device could work properly.
Fixes: 6acba0345b ("usb:gadget:uvc Do not use worker thread to pump isoc usb requests")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://lore.kernel.org/r/20240814112537.2608949-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
While supporting GET_REPORT is a mandatory request per the HID
specification the current implementation of the GET_REPORT request responds
to the USB Host with an empty reply of the request length. However, some
USB Hosts will request the contents of feature reports via the GET_REPORT
request. In addition, some proprietary HID 'protocols' will expect
different data, for the same report ID, to be to become available in the
feature report by sending a preceding SET_REPORT to the USB Device that
defines what data is to be presented when that feature report is
subsequently retrieved via GET_REPORT (with a very fast < 5ms turn around
between the SET_REPORT and the GET_REPORT).
There are two other patch sets already submitted for adding GET_REPORT
support. The first [1] allows for pre-priming a list of reports via IOCTLs
which then allows the USB Host to perform the request, with no further
userspace interaction possible during the GET_REPORT request. And another
[2] which allows for a single report to be setup by userspace via IOCTL,
which will be fetched and returned by the kernel for subsequent GET_REPORT
requests by the USB Host, also with no further userspace interaction
possible.
This patch, while loosely based on both the patch sets, differs by allowing
the option for userspace to respond to each GET_REPORT request by setting
up a poll to notify userspace that a new GET_REPORT request has arrived. To
support this, two extra IOCTLs are supplied. The first of which is used to
retrieve the report ID of the GET_REPORT request (in the case of having
non-zero report IDs in the HID descriptor). The second IOCTL allows for
storing report responses in a list for responding to requests.
The report responses are stored in a list (it will be either added if it
does not exist or updated if it exists already). A flag (userspace_req) can
be set to whether subsequent requests notify userspace or not.
Basic operation when a GET_REPORT request arrives from USB Host:
- If the report ID exists in the list and it is set for immediate return
(i.e. userspace_req == false) then response is sent immediately,
userspace is not notified
- The report ID does not exist, or exists but is set to notify userspace
(i.e. userspace_req == true) then notify userspace via poll:
- If userspace responds, and either adds or update the response in
the list and respond to the host with the contents
- If userspace does not respond within the fixed timeout (2500ms)
but the report has been set prevously, then send 'old' report
contents
- If userspace does not respond within the fixed timeout (2500ms)
and the report does not exist in the list then send an empty
report
Note that userspace could 'prime' the report list at any other time.
While this patch allows for flexibility in how the system responds to
requests, and therefore the HID 'protocols' that could be supported, a
drawback is the time it takes to service the requests and therefore the
maximum throughput that would be achievable. The USB HID Specification
v1.11 itself states that GET_REPORT is not intended for periodic data
polling, so this limitation is not severe.
Testing on an iMX8M Nano Ultra Lite with a heavy multi-core CPU loading
showed that userspace can typically respond to the GET_REPORT request
within 1200ms - which is well within the 5000ms most operating systems seem
to allow, and within the 2500ms set by this patch.
[1] https://lore.kernel.org/all/20220805070507.123151-2-sunil@amarulasolutions.com/
[2] https://lore.kernel.org/all/20220726005824.2817646-1-vi@endrift.com/
Signed-off-by: David Sands <david.sands@biamp.com>
Signed-off-by: Chris Wulff <chris.wulff@biamp.com>
Link: https://lore.kernel.org/r/20240817142850.1311460-2-crwulff@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix potential dereferencing of ERR_PTR() in find_format_by_pix()
and uvc_v4l2_enum_format().
Fix the following smatch errors:
drivers/usb/gadget/function/uvc_v4l2.c:124 find_format_by_pix()
error: 'fmtdesc' dereferencing possible ERR_PTR()
drivers/usb/gadget/function/uvc_v4l2.c:392 uvc_v4l2_enum_format()
error: 'fmtdesc' dereferencing possible ERR_PTR()
Also, fix similar issue in uvc_v4l2_try_format() for potential
dereferencing of ERR_PTR().
Signed-off-by: Abhishek Tamboli <abhishektamboli9@gmail.com>
Link: https://lore.kernel.org/r/20240815102202.594812-1-abhishektamboli9@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the ability for the USB FunctionFS (FFS) gadget driver to be able
to create Device Firmware Upgrade (DFU) functional descriptors. [1]
This patch allows implementation of DFU in userspace using the
FFS gadget. The DFU protocol uses the control pipe (ep0) for all
messaging so only the addition of the DFU functional descriptor
is needed in the kernel driver.
The DFU functional descriptor is written to the ep0 file along with
any other descriptors during FFS setup. DFU requires an interface
descriptor followed by the DFU functional descriptor.
This patch includes documentation of the added descriptor for DFU
and conversion of some existing documentation to kernel-doc format
so that it can be included in the generated docs.
An implementation of DFU 1.1 that implements just the runtime descriptor
using the FunctionFS gadget (with rebooting into u-boot for DFU mode)
has been tested on an i.MX8 Nano.
An implementation of DFU 1.1 that implements both runtime and DFU mode
using the FunctionFS gadget has been tested on Xilinx Zynq UltraScale+.
Note that for the best performance of firmware update file transfers, the
userspace program should respond as quick as possible to the setup packets.
[1] https://www.usb.org/sites/default/files/DFU_1.1.pdf
Signed-off-by: David Sands <david.sands@biamp.com>
Co-developed-by: Chris Wulff <crwulff@gmail.com>
Signed-off-by: Chris Wulff <crwulff@gmail.com>
Link: https://lore.kernel.org/r/20240811000004.1395888-2-crwulff@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert array initializers to C99 syntax by adding the '=' after
each designated initializer.
Fix the following smatch warnings:
drivers/usb/gadget/function/u_audio.c:1117:20:
warning: obsolete array initializer, use C99 syntax
drivers/usb/gadget/function/u_audio.c:1124:28:
warning: obsolete array initializer, use C99 syntax
drivers/usb/gadget/function/u_audio.c:1131:19:
warning: obsolete array initializer, use C99 syntax
drivers/usb/gadget/function/u_audio.c:1138:27:
warning: obsolete array initializer, use C99 syntax
drivers/usb/gadget/function/u_audio.c:1145:25:
warning: obsolete array initializer, use C99 syntax
Also, fix two checkpatch.pl warnings:
WARNING: please, no spaces at the start of a line
+ [UAC_FBACK_CTRL] = {$
WARNING: please, no spaces at the start of a line
+ [UAC_MUTE_CTRL] = {$
Signed-off-by: Abhishek Tamboli <abhishektamboli9@gmail.com>
Reviewed-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240801190209.500373-1-abhishektamboli9@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The blamed commit made ffs_func_disable() always return -EINVAL as the
method calls ffs_func_set_alt() with the ``alt`` argument being
``(unsigned)-1``, which is always greater than MAX_ALT_SETTINGS.
Use the MAX_ALT_SETTINGS check just in the f->set_alt() code path,
f->disable() doesn't care about the ``alt`` parameter.
Make a surgical fix, but really the f->disable() code shall be pulled
out from ffs_func_set_alt(), the code will become clearer. A patch will
follow.
Note that ffs_func_disable() always returning -EINVAL made pixel6 crash
on USB disconnect.
Fixes: 2f550553e2 ("usb: gadget: f_fs: Add the missing get_alt callback")
Cc: stable <stable@kernel.org>
Reported-by: William McVicker <willmcvicker@google.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240802140428.2000312-2-tudor.ambarus@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Upstream commit aba3a8d01d ("usb: gadget: u_serial: add suspend
resume callbacks") added started_delayed flag, so that new ports
which are opened after USB suspend can start IO while resuming.
But if the port was already opened, and gadget suspend kicks in
afterwards, start_delayed will never be set. This causes resume
to bail out before calling gs_start_io(). Fix this by setting
start_delayed during suspend.
Fixes: aba3a8d01d ("usb: gadget: u_serial: add suspend resume callbacks")
Cc: stable@vger.kernel.org
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Link: https://lore.kernel.org/r/20240730125754.576326-1-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the block number 0xff is given to Function Block Discovery
message, the device should return the information of all Function
Blocks, but currently the gadget driver treats it as an error.
Implement the proper behavior for the block 0xff instead.
Fixes: 8b645922b2 ("usb: gadget: Add support for USB MIDI 2.0 function driver")
Cc: stable@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240717095102.10493-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Most writes to configfs handle an optional newline, but do not require
it. By using the number of bytes written as the limit for scnprintf()
it is guaranteed that the final character in the buffer will be
overwritten.
This is expected if it is a newline but is undesirable when a string is
written "as-is" (as libusbgx does, for example).
Update the store function to strip an optional newline, matching the
behaviour of usb_string_copy().
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://lore.kernel.org/r/20240708142553.3995022-1-jkeeping@inmusicbrands.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MIDI2 gadget driver handled the default MIDI protocol version
incorrectly due to the confusion of the protocol version passed via
configfs (either 1 or 2) and UMP protocol bits (0x100 / 0x200).
As a consequence, the default protocol always resulted in MIDI1.
This patch addresses the misunderstanding of the protocol handling.
Fixes: 29ee7a4ddd ("usb: gadget: midi2: Add configfs support")
Cc: stable <stable@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240708095719.25627-1-tiwai@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
printer_read() and printer_write() guard against the race
against disable() by checking the dev->interface flag,
which in turn is guarded by a spinlock.
These functions, however, drop the lock on multiple occasions.
This means that the test has to be redone after reacquiring
the lock and before doing IO.
Add the tests.
This also addresses CVE-2024-25741
Fixes: 7f2ca14d2f ("usb: gadget: function: printer: Interface is disabled and returns error")
Cc: stable <stable@kernel.org>
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20240620114039.5767-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We want the USB fixes in here as well, and resolve a merge conflict in
drivers/usb/dwc3/core.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
