Pick up the CXL DVSEC range register emulation for v6.3, and resolve
conflicts with the cxl_port_probe() split (from for-6.3/cxl-ram-region)
and event handling (from for-6.3/cxl-events).
There are 2 scenarios that requires additional handling. 1. A device that
has active ranges in DVSEC range registers (RR) but no HDM decoder register
block. 2. A device that has both RR active and HDM, but the HDM decoders
are not programmed. The goal is to create emulated decoder software structs
based on the RR.
Move the CXL DVSEC range register decoding code block from
cxl_hdm_decode_init() to its own function. Refactor code in preparation for
the HDM decoder emulation. There is no functionality change to the code.
Name the new function to cxl_dvsec_rr_decode().
The only change is to set range->start and range->end to CXL_RESOURCE_NONE
and skipping the reading of base registers if the range size is 0, which
equates to range not active.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/167640366839.935665.11816388524993234329.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The comment that says mwait_play_dead() returns only on failure is a bit
misleading because mwait_play_dead() could actually return for valid
reasons (such as mwait not being supported by the platform) that do not
indicate a failure of the CPU offline operation. So, remove the comment.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Srivatsa S. Bhat (VMware) <srivatsa@csail.mit.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230128003751.141317-1-srivatsa@csail.mit.edu
The original behavior introduced by commit c6acd629ee ("net/mlx5e: Add
support for devlink-port in non-representors mode") correctly
re-instantiated uplink devlink port and related netdevice during devlink
reload. However with migration to auxiliary devices, this behaviour
changed.
Restore the original behaviour and tear down auxiliary devices
completely during devlink reload.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
mlx5_load_one() is always called with recovery==false, so remove the
unneeded function arg.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Commit cited in "fixes" tag moved the devlink port under separate
devlink entity created for auxiliary device. Respect the network
namespace of parent devlink entity and allocate the devlink there.
Fixes: ee75f1fc44 ("net/mlx5e: Create separate devlink instance for ethernet auxiliary device")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Move the devlink port registration to be done right after devlink
instance registration.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
No need to have dl_port which is tightly coupled with mlx5e code
in mlx5 core code. Move it to struct mlx5e_dev and loose
mlx5e_devlink_get_dl_port() helper.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
On places where netdev pointer is available, access related devlink_port
pointer by netdev->devlink_port instead of using
mlx5e_devlink_get_dl_port() which is going to be removed.
Move SET_NETDEV_DEVLINK_PORT() call right after devlink port
registration to make sure netdev->devlink_port is valid.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The comment is no longer applicable, as the devlink reload and instance
cleanup are both protected with devlink instance lock, therefore no race
can happen.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The parse_attr argument is not being used in
actions_match_supported_fdb(). remove it.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
get_route_and_out_devs() is uses the following condition
mlx5e_eswitch_rep() && mlx5e_is_uplink_rep() to check if a given netdev is the
uplink rep.
Alternatively we can just use the straight forward version
mlx5e_eswitch_uplink_rep() that only checks if a given netdev is uplink rep.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In MultiPort E-Switch mode a single RDMA is created. This device has multiple
RDMA ports that represent the uplink ports that are connected to the E-Switch.
Account for this when creating the RDMA device so it has an additional port for
the non native uplink.
As a side effect of this patch, use shared fdb in multiport eswitch mode.
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
In a follow-up commit multiport eswitch mode will use a shared fdb.
In shared fdb there is a single eswitch fdb and traffic could come from any
port. to distinguish between the ports set a different metadata per uplink port.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The vport bond update function is really updating the vport metadata
and there is no direct relation to bond. Rename the function
to vport metadata update to be used a followup commit.
This commit doesn't change any functionality.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
While at it rename mlx5_lag_mpesw_is_activated() to mlx5_lag_is_mpesw() to
be consistent with checking if other lag modes are activated.
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
MultiPort E-Switch builds on newer hardware's capabilities and introduces
a mode where a single E-Switch is used and all the vports and physical
ports on the NIC are connected to it.
The new mode will allow in the future a decrease in the memory used by the
driver and advanced features that aren't possible today.
This represents a big change in the current E-Switch implantation in mlx5.
Currently, by default, each E-Switch manager manages its E-Switch.
Steering rules in each E-Switch can only forward traffic to the native
physical port associated with that E-Switch. While there are ways to target
non-native physical ports, for example using a bond or via special TC
rules. None of the ways allows a user to configure the driver
to operate by default in such a mode nor can the driver decide
to move to this mode by default as it's user configuration-driven right now.
While MultiPort E-Switch single FDB mode is the preferred mode, older
generations of ConnectX hardware couldn't support this mode so it was never
implemented. Now that there is capable hardware present, start the
transition to having this mode by default.
Introduce a devlink parameter to control MultiPort E-Switch single FDB mode.
This will allow users to select this mode on their system right now
and in the future will allow the driver to move to this mode by default.
Example:
$ devlink dev param set pci/0000:00:0b.0 name esw_multiport value 1 \
cmode runtime
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The Hardkernel Odroid Go Ultra poweroff scheme requires requesting a poweroff
to its two PMICs in order, this represents the poweroff scheme needed to complete
a clean poweroff of the system.
This implement this scheme by implementing a self registering driver to permit
using probe defer until both pmics are finally probed.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Since commit ee6d3dd4ed ("driver core: make kobj_type constant.")
the driver core allows the usage of const struct kobj_type.
Take advantage of this to constify the structure definitions to prevent
modification at runtime.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
