Kalle Valo says:
====================
wireless-next patches for v6.2
Fourth set of patches for v6.2. Few final patches, a big change is
that rtw88 now has USB support.
Major changes:
rtw88
* support USB devices rtw8821cu, rtw8822bu, rtw8822cu and rtw8723du
* tag 'wireless-next-2022-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (43 commits)
wifi: rtl8xxxu: fixing IQK failures for rtl8192eu
wifi: rtlwifi: btcoexist: fix conditions branches that are never executed
wifi: rtlwifi: rtl8192se: remove redundant rtl_get_bbreg() call
wifi: rtw88: Add rtw8723du chipset support
wifi: rtw88: Add rtw8822cu chipset support
wifi: rtw88: Add rtw8822bu chipset support
wifi: rtw88: Add rtw8821cu chipset support
wifi: rtw88: Add common USB chip support
wifi: rtw88: iterate over vif/sta list non-atomically
wifi: rtw88: Drop coex mutex
wifi: rtw88: Drop h2c.lock
wifi: rtw88: Drop rf_lock
wifi: rtw88: Call rtw_fw_beacon_filter_config() with rtwdev->mutex held
wifi: rtw88: print firmware type in info message
wifi: rtw89: add join info upon create interface
wifi: rtw89: fix unsuccessful interface_add flow
wifi: rtw89: stop mac port function when stop_ap()
wifi: rtw89: add mac TSF sync function
wifi: rtw89: request full firmware only once if it's early requested
wifi: rtw89: don't request partial firmware if SECURITY_LOADPIN_ENFORCE
...
====================
Link: https://lore.kernel.org/r/20221212093026.5C5AEC433D2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
An additional set of patches intended for v6.2.
It contains:
* Adjustments for the new HW
* Adjustments for FW API update
* A few small fixes and cleanups
* Improvements for debug dumps mechanism
The driver uses ieee80211_iterate_active_interfaces_atomic()
and ieee80211_iterate_stations_atomic() in several places and does
register accesses in the iterators. This doesn't cope with upcoming
USB support as registers can only be accessed non-atomically.
Split these into a two stage process: First use the atomic iterator
functions to collect all active interfaces or stations on a list, then
iterate over the list non-atomically and call the iterator on each
entry.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Suggested-by: Ping-Ke shih <pkshih@realtek.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221202081224.2779981-7-s.hauer@pengutronix.de
coex->mutex is used in rtw_coex_info_request() only. Most callers of this
function hold rtwdev->mutex already, except for one callsite in the
debugfs code. The debugfs code alone doesn't justify the extra lock, so
acquire rtwdev->mutex there as well and drop the now unnecessary
spinlock.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221202081224.2779981-6-s.hauer@pengutronix.de
The h2c.lock spinlock is used in rtw_fw_send_h2c_command() and
rtw_fw_send_h2c_packet(). Most callers call this with rtwdev->mutex
held, except from one callsite in the debugfs code. The debugfs code
alone doesn't justify the extra lock, so acquire rtwdev->mutex in
debugfs and drop the now unnecessary spinlock.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221202081224.2779981-5-s.hauer@pengutronix.de
The rtwdev->rf_lock spinlock protects the rf register accesses in
rtw_read_rf() and rtw_write_rf(). Most callers of these functions hold
rtwdev->mutex already with the exception of the callsites in the debugfs
code. The debugfs code doesn't justify an extra lock, so acquire the mutex
there as well before calling rf register accessors and drop the now
unnecessary spinlock.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221202081224.2779981-4-s.hauer@pengutronix.de
It's confusing to read two different firmware versions in the syslog
for the same device:
rtw_8822cu 2-1:1.2: Firmware version 9.9.4, H2C version 15
rtw_8822cu 2-1:1.2: Firmware version 9.9.11, H2C version 15
Print the firmware type in this message to make clear these are really
two different firmwares for different purposes:
rtw_8822cu 1-1.4:1.2: WOW Firmware version 9.9.4, H2C version 15
rtw_8822cu 1-1.4:1.2: Firmware version 9.9.11, H2C version 15
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221202081224.2779981-2-s.hauer@pengutronix.de
Under some condition, we now have to do early request full firmware when
rtw89_early_fw_feature_recognize(). In this case, we can avoid requesting
full firmware twice during probing driver. So, we pass out full firmware
from rtw89_early_fw_feature_recognize() if it's requested successfully.
And then, if firmware is settled, we have no need to request full firmware
again during normal initizating flow.
Setting firmware flow is updated to be as the following.
platform | early recognizing | normally initizating
-----------------------------------------------------------------------
deny reading | request full FW | (no more FW requesting)
partial file | | (obtain FW from early pahse)
-----------------------------------------------------------------------
able to read | request partial FW | async request full FW
partial file | (quite small chunk) |
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221202060521.501512-3-pkshih@realtek.com
Kernel logs on platform enabling SECURITY_LOADPIN_ENFORCE
------
```
LoadPin: firmware old-api-denied obj=<unknown> pid=810 cmdline="modprobe -q -- rtw89_8852ce"
rtw89_8852ce 0000:01:00.0: loading /lib/firmware/rtw89/rtw8852c_fw.bin failed with error -1
rtw89_8852ce 0000:01:00.0: Direct firmware load for rtw89/rtw8852c_fw.bin failed with error -1
rtw89_8852ce 0000:01:00.0: failed to early request firmware: -1
```
Trace
------
```
request_partial_firmware_into_buf()
> _request_firmware()
>> fw_get_filesystem_firmware()
>>> kernel_read_file_from_path_initns()
>>>> kernel_read_file()
>>>>> security_kernel_read_file()
// It will iterate enabled LSMs' hooks for kernel_read_file.
// With loadpin, it hooks loadpin_read_file.
```
If SECURITY_LOADPIN_ENFORCE is enabled, doing kernel_read_file() on partial
files will be denied and return -EPERM (-1). Then, the outer API based on it,
e.g. request_partial_firmware_into_buf(), will get the error.
In the case, we cannot get the firmware stuffs right, even though there might
be no error other than a permission issue on reading a partial file. So we have
to request full firmware if SECURITY_LOADPIN_ENFORCE is enabled. It makes us
still have a chance to do early firmware work on this kind of platforms.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221202060521.501512-2-pkshih@realtek.com
The gen 2 chips RTL8192EU and RTL8188FU periodically send the driver
reports about the TX rate, and the driver passes these reports to
sta_statistics. The reports from RTL8192EU may or may not include the
channel width. The reports from RTL8188FU do not include it.
Only access the c2h->ra_report.bw field if the report (skb) is big
enough.
The other problem fixed here is that the code was actually never
changing the channel width initially reported by
rtl8xxxu_bss_info_changed because the value of RATE_INFO_BW_20 is 0.
Fixes: 0985d3a410 ("rtl8xxxu: Feed current txrate information for mac80211")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/5b41f1ae-72e7-6b7a-2459-b736399a1c40@gmail.com
This struct is used to access a sequence of bytes received from the
wifi chip. It must not have any padding bytes between the members.
This doesn't change anything on my system, possibly because currently
none of the members need more than byte alignment.
Fixes: b2b43b7837 ("rtl8xxxu: Initial functionality to handle C2H events for 8723bu")
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/1a270918-da22-ff5f-29fc-7855f740c5ba@gmail.com
The driver is being used by multiple vendors who develop the firmware
api independently. So far the firmware api as used by the driver has
not diverged (yet). This change adds framework for supporting multiple
firmware apis. The vendor-specific support code has to provide a number
of callback operations. Right now it is only attach and detach callbacks
so no real functionality as the api is still common. This code only
adds WCC variant anyway, which is selected for all devices right now.
The vendor-specific part will be built in a separate module when the
driver is configured to be built as a module through Kconfig, ie. when
CONFIG_BRCMFMAC=m.
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221129135446.151065-4-arend.vanspriel@broadcom.com
The CSR_HW_IF_CONFIG_REG register is no longer in use from
IWL_DEVICE_FAMILY_AX210 and on.
This register uses now for CSR_CTXT_INFO_BOOT_CTRL
which has a different meaning and a different format.
Currently we're writing to the register according to
CSR_HW_IF_CONFIG_REGs format, regardless to the device family.
This causes to miss-interpretation of the register value, as it is
parsed according to CSR_CTXT_INFO_BOOT_CTRLs format for devices
families >= IWL_DEVICE_FAMILY_AX210.
Fix this by writing to the register according to the old format
only for the relevant hardware.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20221205102808.8e91eb10dc7d.I3882a2452785ef8b455d99af235e4477917bf46d@changeid
Kalle Valo says:
====================
wireless-next patches for v6.2
Third set of patches for v6.2. mt76 has a new driver for mt7996 Wi-Fi 7
devices and iwlwifi also got initial Wi-Fi 7 support. Otherwise
smaller features and fixes.
Major changes:
ath10k
- store WLAN firmware version in SMEM image table
mt76
- mt7996: new driver for MediaTek Wi-Fi 7 (802.11be) devices
- mt7986, mt7915: enable Wireless Ethernet Dispatch (WED) offload support
- mt7915: add ack signal support
- mt7915: enable coredump support
- mt7921: remain_on_channel support
- mt7921: channel context support
iwlwifi
- enable Wi-Fi 7 Extremely High Throughput (EHT) PHY capabilities
- 320 MHz channels support
* tag 'wireless-next-2022-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (144 commits)
wifi: ath10k: fix QCOM_SMEM dependency
wifi: mt76: mt7921e: add pci .shutdown() support
wifi: mt76: mt7915: mmio: fix naming convention
wifi: mt76: mt7996: add support to configure spatial reuse parameter set
wifi: mt76: mt7996: enable ack signal support
wifi: mt76: mt7996: enable use_cts_prot support
wifi: mt76: mt7915: rely on band_idx of mt76_phy
wifi: mt76: mt7915: enable per bandwidth power limit support
wifi: mt76: mt7915: introduce mt7915_get_power_bound()
mt76: mt7915: Fix PCI device refcount leak in mt7915_pci_init_hif2()
wifi: mt76: do not send firmware FW_FEATURE_NON_DL region
wifi: mt76: mt7921: Add missing __packed annotation of struct mt7921_clc
wifi: mt76: fix coverity overrun-call in mt76_get_txpower()
wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices
wifi: mt76: mt76x0: remove dead code in mt76x0_phy_get_target_power
wifi: mt76: mt7915: fix band_idx usage
wifi: mt76: mt7915: enable .sta_set_txpwr support
wifi: mt76: mt7915: add basedband Txpower info into debugfs
wifi: mt76: mt7915: add support to configure spatial reuse parameter set
wifi: mt76: mt7915: add missing MODULE_PARM_DESC
...
====================
Link: https://lore.kernel.org/r/20221202214254.D0D3DC433C1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nathan noticed that when HWSPINLOCK is disabled there's a Kconfig warning:
WARNING: unmet direct dependencies detected for QCOM_SMEM
Depends on [n]: (ARCH_QCOM [=y] || COMPILE_TEST [=n]) && HWSPINLOCK [=n]
Selected by [m]:
- ATH10K_SNOC [=m] && NETDEVICES [=y] && WLAN [=y] && WLAN_VENDOR_ATH [=y] && ATH10K [=m] && (ARCH_QCOM [=y] || COMPILE_TEST [=n])
The problem here is that QCOM_SMEM depends on HWSPINLOCK so we cannot select
QCOM_SMEM and instead we neeed to use 'depends on'.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/all/Y4YsyaIW+CPdHWv3@dev-arch.thelio-3990X/
Fixes: 4d79f6f34b ("wifi: ath10k: Store WLAN firmware version in SMEM image table")
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221202103027.25974-1-kvalo@kernel.org
This is the second pull request intended for v6.2
It contains two patch-sets sent before with the following content:
* iwlwifi EHT adjustments
* double-free fix in tx path
* iwlmei PLDR flow fixes
* iwlmei smatch fixes
* a logging data improvement
Some combinations of hosts cannnot detect mt7921e after reboot. The
interoperability issue is caused by the status mismatch between host
and chip fw. In such cases, the driver should stop chip activities
and reset chip to default state before reboot.
Suggested-by: angelogioacchino.delregno@collabora.com
Co-developed-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Leon Yen <Leon.Yen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
