Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-08-07 (ice)
This series contains updates to ice driver only.
Grzegorz adds IRQ synchronization call before performing reset and
prevents writing to hardware when it is resetting.
Mateusz swaps incorrect assignment of FEC statistics.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Fix incorrect assigns of FEC counts
ice: Skip PTP HW writes during PTP reset procedure
ice: Fix reset handler
====================
Link: https://patch.msgid.link/20240807224521.3819189-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both ethtool_ops.rxfh_max_context_id and the default value used when
it's not specified are supposed to be exclusive maxima (the former
is documented as such; the latter, U32_MAX, cannot be used as an ID
since it equals ETH_RXFH_CONTEXT_ALLOC), but xa_alloc() expects an
inclusive maximum.
Subtract one from 'limit' to produce an inclusive maximum, and pass
that to xa_alloc().
Increase bnxt's max by one to prevent a (very minor) regression, as
BNXT_MAX_ETH_RSS_CTX is an inclusive max. This is safe since bnxt
is not actually hard-limited; BNXT_MAX_ETH_RSS_CTX is just a
leftover from old driver code that managed context IDs itself.
Rename rxfh_max_context_id to rxfh_max_num_contexts to make its
semantics (hopefully) more obvious.
Fixes: 847a8ab186 ("net: ethtool: let the core choose RSS context IDs")
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://patch.msgid.link/5a2d11a599aa5b0cc6141072c01accfb7758650c.1723045898.git.ecree.xilinx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using FIELD_GET() fails in configurations that don't already include
the header file indirectly:
drivers/net/pse-pd/tps23881.c: In function 'tps23881_i2c_probe':
drivers/net/pse-pd/tps23881.c:755:13: error: implicit declaration of function 'FIELD_GET' [-Wimplicit-function-declaration]
755 | if (FIELD_GET(TPS23881_REG_DEVID_MASK, ret) != TPS23881_DEVICE_ID) {
| ^~~~~~~~~
Fixes: 89108cb5c2 ("net: pse-pd: tps23881: Fix the device ID check")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20240807075455.2055224-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The second tagged commit started sometimes (very rarely, but possible)
throwing WARNs from
net/core/page_pool.c:page_pool_disable_direct_recycling().
Turned out idpf frees interrupt vectors with embedded NAPIs *before*
freeing the queues making page_pools' NAPI pointers lead to freed
memory before these pools are destroyed by libeth.
It's not clear whether there are other accesses to the freed vectors
when destroying the queues, but anyway, we usually free queue/interrupt
vectors only when the queues are destroyed and the NAPIs are guaranteed
to not be referenced anywhere.
Invert the allocation and freeing logic making queue/interrupt vectors
be allocated first and freed last. Vectors don't require queues to be
present, so this is safe. Additionally, this change allows to remove
that useless queue->q_vector pointer cleanup, as vectors are still
valid when freeing the queues (+ both are freed within one function,
so it's not clear why nullify the pointers at all).
Fixes: 1c325aac10 ("idpf: configure resources for TX queues")
Fixes: 90912f9f4f ("idpf: convert header split mode to libeth + napi_build_skb()")
Reported-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240806220923.3359860-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The initialization of vport interrupt consists of two functions:
1) idpf_vport_intr_init() where a generic configuration is done
2) idpf_vport_intr_req_irq() where the irq for each q_vector is
requested.
The first function used to create a base name for each interrupt using
"kasprintf()" call. Unfortunately, although that call allocated memory
for a text buffer, that memory was never released.
Fix this by removing creating the interrupt base name in 1).
Instead, always create a full interrupt name in the function 2), because
there is no need to create a base name separately, considering that the
function 2) is never called out of idpf_vport_intr_init() context.
Fixes: d4d5587182 ("idpf: initialize interrupts and enable vport")
Cc: stable@vger.kernel.org # 6.7
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240806220923.3359860-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The second tagged commit introduced a UAF, as it removed restoring
q_vector->vport pointers after reinitializating the structures.
This is due to that all queue allocation functions are performed here
with the new temporary vport structure and those functions rewrite
the backpointers to the vport. Then, this new struct is freed and
the pointers start leading to nowhere.
But generally speaking, the current logic is very fragile. It claims
to be more reliable when the system is low on memory, but in fact, it
consumes two times more memory as at the moment of running this
function, there are two vports allocated with their queues and vectors.
Moreover, it claims to prevent the driver from running into "bad state",
but in fact, any error during the rebuild leaves the old vport in the
partially allocated state.
Finally, if the interface is down when the function is called, it always
allocates a new queue set, but when the user decides to enable the
interface later on, vport_open() allocates them once again, IOW there's
a clear memory leak here.
Just don't allocate a new queue set when performing a reset, that solves
crashes and memory leaks. Readd the old queue number and reopen the
interface on rollback - that solves limbo states when the device is left
disabled and/or without HW queues enabled.
Fixes: 02cbfba1ad ("idpf: add ethtool callbacks")
Fixes: e4891e4687 ("idpf: split &idpf_queue into 4 strictly-typed queue structures")
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240806220923.3359860-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A recent commit has modified the code in __bnxt_reserve_rings() to
set the default RSS indirection table to default only when the number
of RX rings is changing. While this works for newer firmware that
requires RX ring reservations, it causes the regression on older
firmware not requiring RX ring resrvations (BNXT_NEW_RM() returns
false).
With older firmware, RX ring reservations are not required and so
hw_resc->resv_rx_rings is not always set to the proper value. The
comparison:
if (old_rx_rings != bp->hw_resc.resv_rx_rings)
in __bnxt_reserve_rings() may be false even when the RX rings are
changing. This will cause __bnxt_reserve_rings() to skip setting
the default RSS indirection table to default to match the current
number of RX rings. This may later cause bnxt_fill_hw_rss_tbl() to
use an out-of-range index.
We already have bnxt_check_rss_tbl_no_rmgr() to handle exactly this
scenario. We just need to move it up in bnxt_need_reserve_rings()
to be called unconditionally when using older firmware. Without the
fix, if the TX rings are changing, we'll skip the
bnxt_check_rss_tbl_no_rmgr() call and __bnxt_reserve_rings() may also
skip the bnxt_set_dflt_rss_indir_tbl() call for the reason explained
in the last paragraph. Without setting the default RSS indirection
table to default, it causes the regression:
BUG: KASAN: slab-out-of-bounds in __bnxt_hwrm_vnic_set_rss+0xb79/0xe40
Read of size 2 at addr ffff8881c5809618 by task ethtool/31525
Call Trace:
__bnxt_hwrm_vnic_set_rss+0xb79/0xe40
bnxt_hwrm_vnic_rss_cfg_p5+0xf7/0x460
__bnxt_setup_vnic_p5+0x12e/0x270
__bnxt_open_nic+0x2262/0x2f30
bnxt_open_nic+0x5d/0xf0
ethnl_set_channels+0x5d4/0xb30
ethnl_default_set_doit+0x2f1/0x620
Reported-by: Breno Leitao <leitao@debian.org>
Closes: https://lore.kernel.org/netdev/ZrC6jpghA3PWVWSB@gmail.com/
Fixes: 98ba1d931f ("bnxt_en: Fix RSS logic in __bnxt_reserve_rings()")
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240806053742.140304-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bcm_sf2_mdio_register() calls of_phy_find_device() and then
phy_device_remove() in a loop to remove existing PHY devices.
of_phy_find_device() eventually calls bus_find_device(), which calls
get_device() on the returned struct device * to increment the refcount.
The current implementation does not decrement the refcount, which causes
memory leak.
This commit adds the missing phy_device_free() call to decrement the
refcount via put_device() to balance the refcount.
Fixes: 771089c2a4 ("net: dsa: bcm_sf2: Ensure that MDIO diversion is used")
Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240806011327.3817861-1-joe@pf.is.s.u-tokyo.ac.jp
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit ac21add254 ("ice: Implement driver functionality to dump fec
statistics") introduces obtaining FEC correctable and uncorrectable
stats per netdev in ICE driver. Unfortunately the assignment of values
to fec_stats structure has been done incorrectly. This commit fixes the
assignments.
Fixes: ac21add254 ("ice: Implement driver functionality to dump fec statistics")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Free the unused skb when not ip packets arrive.
Fixes: c6adf77953 ("net: usb: qmi_wwan: add qmap mux protocol support")
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Virtio spec says:
The driver MUST have negotiated the VIRTIO_NET_F_VQ_NOTF_COAL
feature when issuing commands VIRTIO_NET_CTRL_NOTF_COAL_VQ_SET
and VIRTIO_NET_CTRL_NOTF_COAL_VQ_GET.
So we add the feature negotiation check to
virtnet_send_{r,t}x_ctrl_coal_vq_cmd as a basis for the next bugfix patch.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
GVE driver wrongly relies on netif_carrier_ok() to check the
interface administrative state when resources are being
allocated/deallocated for queue(s). netif_carrier_ok() needs
to be replaced with netif_running() for all such cases.
Administrative state is the result of "ip link set dev <dev>
up/down". It reflects whether the administrator wants to use
the device for traffic and the corresponding resources have
been allocated.
Fixes: 5f08cd3d64 ("gve: Alloc before freeing when adjusting queues")
Signed-off-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Shailend Chand <shailend@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240801205619.987396-1-pkaligineedi@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Paolo Abeni:
"Including fixes from wireless, bleutooth, BPF and netfilter.
Current release - regressions:
- core: drop bad gso csum_start and offset in virtio_net_hdr
- wifi: mt76: fix null pointer access in mt792x_mac_link_bss_remove
- eth: tun: add missing bpf_net_ctx_clear() in do_xdp_generic()
- phy: aquantia: only poll GLOBAL_CFG regs on aqr113, aqr113c and
aqr115c
Current release - new code bugs:
- smc: prevent UAF in inet_create()
- bluetooth: btmtk: fix kernel crash when entering btmtk_usb_suspend
- eth: bnxt: reject unsupported hash functions
Previous releases - regressions:
- sched: act_ct: take care of padding in struct zones_ht_key
- netfilter: fix null-ptr-deref in iptable_nat_table_init().
- tcp: adjust clamping window for applications specifying SO_RCVBUF
Previous releases - always broken:
- ethtool: rss: small fixes to spec and GET
- mptcp:
- fix signal endpoint re-add
- pm: fix backup support in signal endpoints
- wifi: ath12k: fix soft lockup on suspend
- eth: bnxt_en: fix RSS logic in __bnxt_reserve_rings()
- eth: ice: fix AF_XDP ZC timeout and concurrency issues
- eth: mlx5:
- fix missing lock on sync reset reload
- fix error handling in irq_pool_request_irq"
* tag 'net-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
mptcp: fix duplicate data handling
mptcp: fix bad RCVPRUNED mib accounting
ipv6: fix ndisc_is_useropt() handling for PIO
igc: Fix double reset adapter triggered from a single taprio cmd
net: MAINTAINERS: Demote Qualcomm IPA to "maintained"
net: wan: fsl_qmc_hdlc: Discard received CRC
net: wan: fsl_qmc_hdlc: Convert carrier_lock spinlock to a mutex
net/mlx5e: Add a check for the return value from mlx5_port_set_eth_ptys
net/mlx5e: Fix CT entry update leaks of modify header context
net/mlx5e: Require mlx5 tc classifier action support for IPsec prio capability
net/mlx5: Fix missing lock on sync reset reload
net/mlx5: Lag, don't use the hardcoded value of the first port
net/mlx5: DR, Fix 'stack guard page was hit' error in dr_rule
net/mlx5: Fix error handling in irq_pool_request_irq
net/mlx5: Always drain health in shutdown callback
net: Add skbuff.h to MAINTAINERS
r8169: don't increment tx_dropped in case of NETDEV_TX_BUSY
netfilter: iptables: Fix potential null-ptr-deref in ip6table_nat_table_init().
netfilter: iptables: Fix null-ptr-deref in iptable_nat_table_init().
net: drop bad gso csum_start and offset in virtio_net_hdr
...
Following the implementation of "igc: Add TransmissionOverrun counter"
patch, when a taprio command is triggered by user, igc processes two
commands: TAPRIO_CMD_REPLACE followed by TAPRIO_CMD_STATS. However, both
commands unconditionally pass through igc_tsn_offload_apply() which
evaluates and triggers reset adapter. The double reset causes issues in
the calculation of adapter->qbv_count in igc.
TAPRIO_CMD_REPLACE command is expected to reset the adapter since it
activates qbv. It's unexpected for TAPRIO_CMD_STATS to do the same
because it doesn't configure any driver-specific TSN settings. So, the
evaluation in igc_tsn_offload_apply() isn't needed for TAPRIO_CMD_STATS.
To address this, commands parsing are relocated to
igc_tsn_enable_qbv_scheduling(). Commands that don't require an adapter
reset will exit after processing, thus avoiding igc_tsn_offload_apply().
Fixes: d3750076d4 ("igc: Add TransmissionOverrun counter")
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240730173304.865479-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The carrier_lock spinlock protects the carrier detection. While it is
held, framer_get_status() is called which in turn takes a mutex.
This is not correct and can lead to a deadlock.
A run with PROVE_LOCKING enabled detected the issue:
[ BUG: Invalid wait context ]
...
c204ddbc (&framer->mutex){+.+.}-{3:3}, at: framer_get_status+0x40/0x78
other info that might help us debug this:
context-{4:4}
2 locks held by ifconfig/146:
#0: c0926a38 (rtnl_mutex){+.+.}-{3:3}, at: devinet_ioctl+0x12c/0x664
#1: c2006a40 (&qmc_hdlc->carrier_lock){....}-{2:2}, at: qmc_hdlc_framer_set_carrier+0x30/0x98
Avoid the spinlock usage and convert carrier_lock to a mutex.
Fixes: 54762918ca ("net: wan: fsl_qmc_hdlc: Add framer support")
Cc: stable@vger.kernel.org
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240730063104.179553-1-herve.codina@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cited commit allocates a new modify header to replace the old
one when updating CT entry. But if failed to allocate a new one, eg.
exceed the max number firmware can support, modify header will be
an error pointer that will trigger a panic when deallocating it. And
the old modify header point is copied to old attr. When the old
attr is freed, the old modify header is lost.
Fix it by restoring the old attr to attr when failed to allocate a
new modify header context. So when the CT entry is freed, the right
modify header context will be freed. And the panic of accessing
error pointer is also fixed.
Fixes: 94ceffb48e ("net/mlx5e: Implement CT entry update")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Require mlx5 classifier action support when creating IPSec chains in
offload path. MLX5_IPSEC_CAP_PRIO should only be set if CONFIG_MLX5_CLS_ACT
is enabled. If CONFIG_MLX5_CLS_ACT=n and MLX5_IPSEC_CAP_PRIO is set,
configuring IPsec offload will fail due to the mlxx5 ipsec chain rules
failing to be created due to lack of classifier action support.
Fixes: fa5aa2f890 ("net/mlx5e: Use chains for IPsec policy priority offload")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240730061638.1831002-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
ice: fix AF_XDP ZC timeout and concurrency issues
Maciej Fijalkowski says:
Changes included in this patchset address an issue that customer has
been facing when AF_XDP ZC Tx sockets were used in combination with flow
control and regular Tx traffic.
After executing:
ethtool --set-priv-flags $dev link-down-on-close on
ethtool -A $dev rx on tx on
launching multiple ZC Tx sockets on $dev + pinging remote interface (so
that regular Tx traffic is present) and then going through down/up of
$dev, Tx timeout occurred and then most of the time ice driver was unable
to recover from that state.
These patches combined together solve the described above issue on
customer side. Main focus here is to forbid producing Tx descriptors when
either carrier is not yet initialized or process of bringing interface
down has already started.
v1: https://lore.kernel.org/netdev/20240708221416.625850-1-anthony.l.nguyen@intel.com/
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: xsk: fix txq interrupt mapping
ice: add missing WRITE_ONCE when clearing ice_rx_ring::xdp_prog
ice: improve updating ice_{t,r}x_ring::xsk_pool
ice: toggle netif_carrier when setting up XSK pool
ice: modify error handling when setting XSK pool in ndo_bpf
ice: replace synchronize_rcu with synchronize_net
ice: don't busy wait for Rx queue disable in ice_qp_dis()
ice: respect netif readiness in AF_XDP ZC related ndo's
====================
Link: https://patch.msgid.link/20240729200716.681496-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MDIX status is not accurately reflecting the current state after the link
partner has manually altered its MDIX configuration while operating in forced
mode.
Access information about Auto mdix completion and pair selection from the
KSZ9131's Auto/MDI/MDI-X status register
Fixes: b64e6a8794 ("net: phy: micrel: Add PHY Auto/MDI/MDI-X set driver for KSZ9131")
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240725071125.13960-1-Raju.Lakkaraju@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ice_cfg_txq_interrupt() internally handles XDP Tx ring. Do not use
ice_for_each_tx_ring() in ice_qvec_cfg_msix() as this causing us to
treat XDP ring that belongs to queue vector as Tx ring and therefore
misconfiguring the interrupts.
Fixes: 2d4238f556 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
xsk_buff_pool pointers that ice ring structs hold are updated via
ndo_bpf that is executed in process context while it can be read by
remote CPU at the same time within NAPI poll. Use synchronize_net()
after pointer update and {READ,WRITE}_ONCE() when working with mentioned
pointer.
Fixes: 2d4238f556 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
This so we prevent Tx timeout issues. One of conditions checked on
running in the background dev_watchdog() is netif_carrier_ok(), so let
us turn it off when we disable the queues that belong to a q_vector
where XSK pool is being configured. Turn carrier on in ice_qp_ena()
only when ice_get_link_status() tells us that physical link is up.
Fixes: 2d4238f556 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Don't bail out right when spotting an error within ice_qp_{dis,ena}()
but rather track error and go through whole flow of disabling and
enabling queue pair.
Fixes: 2d4238f556 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Given that ice_qp_dis() is called under rtnl_lock, synchronize_net() can
be called instead of synchronize_rcu() so that XDP rings can finish its
job in a faster way. Also let us do this as earlier in XSK queue disable
flow.
Additionally, turn off regular Tx queue before disabling irqs and NAPI.
Fixes: 2d4238f556 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When ice driver is spammed with multiple xdpsock instances and flow
control is enabled, there are cases when Rx queue gets stuck and unable
to reflect the disable state in QRX_CTRL register. Similar issue has
previously been addressed in commit 13a6233b03 ("ice: Add support to
enable/disable all Rx queues before waiting").
To workaround this, let us simply not wait for a disabled state as later
patch will make sure that regardless of the encountered error in the
process of disabling a queue pair, the Rx queue will be enabled.
Fixes: 2d4238f556 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Address a scenario in which XSK ZC Tx produces descriptors to XDP Tx
ring when link is either not yet fully initialized or process of
stopping the netdev has already started. To avoid this, add checks
against carrier readiness in ice_xsk_wakeup() and in ice_xmit_zc().
One could argue that bailing out early in ice_xsk_wakeup() would be
sufficient but given the fact that we produce Tx descriptors on behalf
of NAPI that is triggered for Rx traffic, the latter is also needed.
Bringing link up is an asynchronous event executed within
ice_service_task so even though interface has been brought up there is
still a time frame where link is not yet ok.
Without this patch, when AF_XDP ZC Tx is used simultaneously with stack
Tx, Tx timeouts occur after going through link flap (admin brings
interface down then up again). HW seem to be unable to transmit
descriptor to the wire after HW tail register bump which in turn causes
bit __QUEUE_STATE_STACK_XOFF to be set forever as
netdev_tx_completed_queue() sees no cleaned bytes on the input.
Fixes: 126cdfe100 ("ice: xsk: Improve AF_XDP ZC Tx and use batching API")
Fixes: 2d4238f556 ("ice: Add support for AF_XDP")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
As described in the kdoc for .create_rxfh_context we are responsible
for populating the defaults. The core will not call .get_rxfh
for non-0 context.
The problem can be easily observed since Netlink doesn't currently
use the cache. Using netlink ethtool:
$ ethtool -x eth0 context 1
[...]
RSS hash key:
13:60:cd:60:14:d3:55:36:86:df:90:f2:96:14:e2:21:05:57:a8:8f:a5:12:5e:54:62:7f:fd:3c:15:7e:76:05:71:42:a2:9a:73:80:09:9c
RSS hash function:
toeplitz: on
xor: off
crc32: off
But using IOCTL ethtool shows:
$ ./ethtool-old -x eth0 context 1
[...]
RSS hash key:
00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00
RSS hash function:
Operation not supported
Fixes: 7964e78846 ("net: ethtool: use the tracking array for get_rxfh on custom RSS contexts")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In commit under Fixes I split the bnxt_set_rxfh_context() function,
and attached the appropriate chunks to new ops. I missed that
bnxt_set_rxfh_context() gets called after some initial checks
in bnxt_set_rxfh(), namely that the hash function is Toeplitz.
Fixes: 5c466b4d4e ("eth: bnxt: move from .set_rxfh to .create_rxfh_context and friends")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
