Currently, upon the reception of an ADD_ADDR (and when the fullmesh flag
is not used), the in-kernel PM will create new subflows using the local
address the routing configuration will pick.
It would be easier to pick local addresses from a selected list of
endpoints, and use it only once, than relying on routing rules.
Use case: both the client (C) and the server (S) have two addresses (a
and b). The client establishes the connection between C(a) and S(a).
Once established, the server announces its additional address S(b). Once
received, the client connects to it using its second address C(b).
Compared to a situation without the 'laminar' endpoint for C(b), the
client didn't use this address C(b) to establish a subflow to the
server's primary address S(a). So at the end, we have:
C S
C(a) --- S(a)
C(b) --- S(b)
In case of a 3rd address on each side (C(c) and S(c)), upon the
reception of an ADD_ADDR with S(c), the client should not pick C(b)
because it has already been used. C(c) should then be used.
Note that this situation is currently possible if C doesn't add any
endpoint, but configure the routing in order to pick C(b) for the route
to S(b), and pick C(c) for the route to S(c). That doesn't sound very
practical because it means knowing in advance the IP addresses that
will be used and announced by the server.
'laminar', like the idea of laminar flows: the different subflows don't
mix with each other on an endpoint, unlike the "turbulent" way traffic
is mixed by 'fullmesh'.
In the code, the new endpoint type is added. Similar to the other
subflow types, an MPTCP_INFO counter is added. While at it, hole are now
commented in struct mptcp_info, to remember next time that these holes
can no longer be used.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/503
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-15-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All the 'unsigned int' variables from the 'pm_nl_pernet' structure are
bounded to MPTCP_PM_ADDR_MAX, currently set to 8. The endpoint ID is
also bounded by the protocol to 8-bit. MPTCP_PM_ADDR_MAX, if extended
later, will never over 8-bit.
So no need to use 'unsigned int' variables, 'u8' is enough.
Note that the exposed counters in MPTCP_INFO are already limited to
8-bit, same for pm->extra_subflows, and others. So it seems even better
to limit them to 8-bit.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-13-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few variables linked to the in-kernel Path-Manager are confusing, and
it would help current and future developers, to clarify them.
One of them is 'local_addr_max', which in fact represents the maximum
number of 'subflow' endpoints that can be used to create new subflows,
and not the number of local addresses that have been used to create
subflows.
While at it, add an additional name for the corresponding variable in
MPTCP INFO: mptcpi_endp_subflow_max. Not to break the current uAPI, the
new name is added as a 'define' pointing to the former name. This will
then also help userspace devs.
Also move the variable and function next to the other 'endp_X_max' ones.
No functional changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-9-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few variables linked to the in-kernel Path-Manager are confusing, and
it would help current and future developers, to clarify them.
One of them is 'add_addr_accept_max', which in fact represents the limit
of ADD_ADDR that can be accepted: the limit set via 'ip mptcp limit
add_addr_accepted X' for example. It is not linked to the maximum number
of accepted ADD_ADDR.
While at it, add an additional name for the corresponding variable in
MPTCP INFO: mptcpi_limit_add_addr_accepted. Not to break the current
uAPI, the new name is added as a 'define' pointing to the former name.
This will then also help userspace devs.
No functional changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-8-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few variables linked to the in-kernel Path-Manager are confusing, and
it would help current and future developers, to clarify them.
One of them is 'add_addr_signal_max', which in fact represents the
maximum number of 'signal' endpoints that can be used to announced
addresses, and not the number of ADD_ADDR that can be signalled.
While at it, add an additional name for the corresponding variable in
MPTCP INFO: mptcpi_endp_signal_max. Not to break the current uAPI, the
new name is added as a 'define' pointing to the former name. This will
then also help userspace devs.
No functional changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-7-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few variables linked to the in-kernel Path-Manager are confusing, and
it would help current and future developers, to clarify them.
One of them is 'subflows_max', which in fact represents the limit of
extra subflows: the limit set via 'ip mptcp limit subflows X' for
example. It is not linked to the maximum number of created / possible
subflows.
While at it, add an additional name for the corresponding variable in
MPTCP INFO: mptcpi_limit_extra_subflows. Not to break the current uAPI,
the new name is added as a 'define' pointing to the former name. This
will then also help userspace devs.
No functional changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-6-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few variables linked to the Path-Managers are confusing, and it would
help current and future developers, to clarify them.
One of them is 'subflows', which in fact represents the number of extra
subflows: all the additional subflows created after the initial one, and
not the total number of subflows.
While at it, add an additional name for the corresponding variable in
MPTCP INFO: mptcpi_extra_subflows. Not to break the current uAPI, the
new name is added as a 'define' pointing to the former name. This will
then also help userspace devs.
No functional changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-5-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When servers set the C-flag in their MP_CAPABLE to tell clients not to
create subflows to the initial address and port, clients will likely not
use their other endpoints. That's because the in-kernel path-manager
uses the 'subflow' endpoints to create subflows only to the initial
address and port.
If the limits have not been modified to accept ADD_ADDR, the client
doesn't try to establish new subflows. If the limits accept ADD_ADDR,
the routing routes will be used to select the source IP.
The C-flag is typically set when the server is operating behind a legacy
Layer 4 load balancer, or using anycast IP address. Clients having their
different 'subflow' endpoints setup, don't end up creating multiple
subflows as expected, and causing some deployment issues.
A special case is then added here: when servers set the C-flag in the
MPC and directly sends an ADD_ADDR, this single ADD_ADDR is accepted.
The 'subflows' endpoints will then be used with this new remote IP and
port. This exception is only allowed when the ADD_ADDR is sent
immediately after the 3WHS, and makes the client switching to the 'fully
established' mode. After that, 'select_local_address()' will not be able
to find any subflows, because 'id_avail_bitmap' will be filled in
mptcp_pm_create_subflow_or_signal_addr(), when switching to 'fully
established' mode.
Fixes: df377be387 ("mptcp: add deny_join_id0 in mptcp_options_received")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/536
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250925-net-next-mptcp-c-flag-laminar-v1-1-ad126cc47c6b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the mibs required to cover the few possible fallback causes still
lacking suck info.
Move the relevant mib increment into the fallback helper, so that no
eventual future fallback operation will miss a paired mib increment.
Additionally track failed fallback via its own mib, such mib is
incremented only when a fallback mandated by the protocol fails - due to
racing subflow creation.
While at the above, rename an existing helper to reduce long lines
problems all along.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250723-net-next-mptcp-track-fallbacks-v1-1-a83cce08f2d5@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The TCP_MAXSEG socket option is currently not supported by MPTCP, mainly
because it has never been requested before. But there are still valid
use-cases, e.g. with HAProxy.
This patch adds its support in MPTCP by propagating the value to all
subflows. The get part looks at the value on the first subflow, to be as
closed as possible to TCP. Only one value can be returned for the cached
MSS, so this can come only from one subflow.
Similar to mptcp_setsockopt_first_sf_only(), a generic helper
mptcp_setsockopt_all_subflows() is added to set sockopt for each
subflows of the mptcp socket.
Add a new member for struct mptcp_sock to store the TCP_MAXSEG value,
and return this value in getsockopt.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/515
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250719-net-next-mptcp-tcp_maxseg-v2-3-8c910fbc5307@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have races similar to the one addressed by the previous patch between
subflow failing and additional subflow creation. They are just harder to
trigger.
The solution is similar. Use a separate flag to track the condition
'socket state prevent any additional subflow creation' protected by the
fallback lock.
The socket fallback makes such flag true, and also receiving or sending
an MP_FAIL option.
The field 'allow_infinite_fallback' is now always touched under the
relevant lock, we can drop the ONCE annotation on write.
Fixes: 478d770008 ("mptcp: send out MP_FAIL when data checksum fails")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250714-net-mptcp-fallback-races-v1-2-391aff963322@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch defines the original in-kernel netlink path manager as a
new struct mptcp_pm_ops named "mptcp_pm_kernel", and register it in
mptcp_pm_kernel_register(). And define the userspace path manager as
a new struct mptcp_pm_ops named "mptcp_pm_userspace", and register it
in mptcp_pm_init().
To ensure that there's always a valid path manager available, the default
path manager "mptcp_pm_kernel" will be skipped in mptcp_pm_unregister().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250313-net-next-mptcp-pm-ops-intro-v1-7-f4e4a88efc50@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In order to allow users to develop their own BPF-based path manager,
this patch defines a struct ops "mptcp_pm_ops" for an MPTCP path
manager, which contains a set of interfaces. Currently only init()
and release() interfaces are included, subsequent patches will add
others step by step.
Add a set of functions to register, unregister, find and validate a
given path manager struct ops.
"list" is used to add this path manager to mptcp_pm_list list when
it is registered. "name" is used to identify this path manager.
mptcp_pm_find() uses "name" to find a path manager on the list.
mptcp_pm_unregister is not used in this set, but will be invoked in
.unreg of struct bpf_struct_ops. mptcp_pm_validate() will be invoked
in .validate of struct bpf_struct_ops. That's why they are exported.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250313-net-next-mptcp-pm-ops-intro-v1-6-f4e4a88efc50@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Before this patch, the PM code was dispersed in different places:
- pm.c had common code for all PMs, but also Netlink specific code that
will not be needed with the future BPF path-managers.
- pm_netlink.c had common Netlink code.
To clarify the code, a reorganisation is suggested here, only by moving
code around, and small helper renaming to avoid confusions:
- pm_netlink.c now only contains common PM Netlink code:
- PM events: this code was already there
- shared helpers around Netlink code that were already there as well
- shared Netlink commands code from pm.c
- pm.c now no longer contain Netlink specific code.
- protocol.h has been updated accordingly:
- mptcp_nl_fill_addr() no longer need to be exported.
The code around the PM is now less confusing, which should help for the
maintenance in the long term.
This will certainly impact future backports, but because other cleanups
have already done recently, and more are coming to ease the addition of
a new path-manager controlled with BPF (struct_ops), doing that now
seems to be a good time. Also, many issues around the PM have been fixed
a few months ago while increasing the code coverage in the selftests, so
such big reorganisation can be done with more confidence now.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-15-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before this patch, the PM code was dispersed in different places:
- pm.c had common code for all PMs
- pm_netlink.c was supposed to be about the in-kernel PM, but also had
exported common helpers, callbacks used by the different PMs, NL
events for PM userspace daemon, etc. quite confusing.
- pm_userspace.c had userspace PM only code, but using specific
in-kernel PM helpers
To clarify the code, a reorganisation is suggested here, only by moving
code around, and (un)exporting functions:
- helpers used from both PMs and not linked to Netlink
- callbacks used by different PMs, e.g. ADD_ADDR management
- some helpers have been marked as 'static'
- protocol.h has been updated accordingly
- (while at it, a needless if before a kfree(), spot by checkpatch in
mptcp_remove_anno_list_by_saddr(), has been removed)
The code around the PM is now less confusing, which should help for the
maintenance in the long term.
This will certainly impact future backports, but because other cleanups
have already done recently, and more are coming to ease the addition of
a new path-manager controlled with BPF (struct_ops), doing that now
seems to be a good time. Also, many issues around the PM have been fixed
a few months ago while increasing the code coverage in the selftests, so
such big reorganisation can be done with more confidence now.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-13-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To make it clear what actions are in-kernel PM specific and which ones
are not and done for all PMs, e.g. sending ADD_ADDR and close associated
subflows when a RM_ADDR is received.
The behavioural is changed a bit: MPTCP_PM_ADD_ADDR_RECEIVED is now
treated after MPTCP_PM_ADD_ADDR_SEND_ACK and MPTCP_PM_RM_ADDR_RECEIVED,
but that should not change anything in practice.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-10-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When destroying an MPTCP socket, some userspace PM specific code was
called from mptcp_destroy_common() in protocol.c. That feels wrong, and
it is the only case.
Instead, the core now calls mptcp_pm_destroy() from pm.c which is now in
charge of cleaning the announced addresses list, and ask the different
PMs to do extra cleaning if needed, e.g. the userspace PM, if used, will
clean the local addresses list.
While at it, the userspace PM specific helper has been prefixed with
'mptcp_userspace_pm_' like the other ones.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-9-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, in-kernel PM specific helpers are prefixed with
'mptcp_pm_nl_'. But here 'mptcp_pm_nl_is_init_remote_addr' is not
specific to this PM: it is called from pm.c for both the in-kernel and
userspace PMs.
To avoid confusions, the '_nl' bit has been removed from the name.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-7-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, in-kernel PM specific helpers are prefixed with
'mptcp_pm_nl_'. But here 'mptcp_pm_nl_subflow_chk_stale' is not specific
to this PM: it is called from pm.c for both the in-kernel and userspace
PMs.
To avoid confusions, the '_nl' bit has been removed from the name.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-6-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, in-kernel PM specific helpers are prefixed with
'mptcp_pm_nl_'. But here 'mptcp_pm_nl_work' is not specific to this PM:
it is called from the core to call helpers, some of them needed by both
the in-kernel and userspace PMs.
To avoid confusions, the '_nl' bit has been removed from the name.
Also used 'worker' instead of 'work', similar to protocol.c's worker.
No behavioural changes intended.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-4-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following code in mptcp_userspace_pm_get_local_id() that assigns "skc"
to "new_entry" is not allowed in BPF if we use the same code to implement
the get_local_id() interface of a BFP path manager:
memset(&new_entry, 0, sizeof(struct mptcp_pm_addr_entry));
new_entry.addr = *skc;
new_entry.addr.id = 0;
new_entry.flags = MPTCP_PM_ADDR_FLAG_IMPLICIT;
To solve the issue, this patch moves this assignment to "new_entry" forward
to mptcp_pm_get_local_id(), and then passing "new_entry" as a parameter to
both mptcp_pm_nl_get_local_id() and mptcp_userspace_pm_get_local_id().
No behavioural changes intended.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250307-net-next-mptcp-pm-reorg-v1-1-abef20ada03b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the RX path refactor the mentioned function is expected to run
frequently, let's optimize it a bit.
Scan for ready subflow from the last processed one, and stop after
traversing the list once or reaching the msk memory limit - instead of
looking for dubious per-subflow conditions.
Also re-order the memory limit checks, to avoid duplicate tests.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250218-net-next-mptcp-rx-path-refactor-v1-7-4a47d90d7998@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit c2e6048fa1 ("mptcp: fix race in release_cb") we can
move the whole MPTCP rx path under the socket lock leveraging the
release_cb.
We can drop a bunch of spin_lock pairs in the receive functions, use
a single receive queue and invoke __mptcp_move_skbs only when subflows
ask for it.
This will allow more cleanup in the next patch.
Some changes are worth specific mention:
The msk rcvbuf update now always happens under both the msk and the
subflow socket lock: we can drop a bunch of ONCE annotation and
consolidate the checks.
When the skbs move is delayed at msk release callback time, even the
msk rcvbuf update is delayed; additionally take care of such action in
__mptcp_move_skbs().
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250218-net-next-mptcp-rx-path-refactor-v1-3-4a47d90d7998@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When we will move the whole RX path under the msk socket lock, updating
the already queued skb for passive fastopen socket at 3rd ack time will
be extremely painful and race prone
The map_seq for already enqueued skbs is used only to allow correct
coalescing with later data; preventing collapsing to the first skb of
a fastopen connect we can completely remove the
__mptcp_fastopen_gen_msk_ackseq() helper.
Before dropping this helper, a new item had to be added to the
mptcp_skb_cb structure. Because this item will be frequently tested in
the fast path -- almost on every packet -- and because there is free
space there, a single byte is used instead of a bitfield. This micro
optimisation slightly reduces the number of CPU operations to do the
associated check.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250218-net-next-mptcp-rx-path-refactor-v1-2-4a47d90d7998@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch updates the interfaces set_flags to reduce repetitive
code, adds a new parameter 'local' for them.
The local address is parsed in public helper mptcp_pm_nl_set_flags_doit(),
then pass it to mptcp_pm_nl_set_flags() and mptcp_userspace_pm_set_flags().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The first parameter 'skb' in mptcp_pm_nl_set_flags() is only used to
obtained the network namespace, which can also be obtained through the
second parameters 'info' by using genl_info_net() helper.
This patch drops these useless parameters 'skb' in all three set_flags()
interfaces.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The netlink messages are sent both in mptcp_pm_nl_get_addr() and
mptcp_userspace_pm_get_addr(), this makes the code somewhat repetitive.
This is because the netlink PM and userspace PM use different locks to
protect the address entry that needs to be sent via the netlink message.
The former uses rcu read lock, and the latter uses msk->pm.lock.
The current get_addr() flow looks like this:
lock();
entry = get_entry();
send_nlmsg(entry);
unlock();
After holding the lock, get the entry from the list, send the entry, and
finally release the lock.
This patch changes the process by getting the entry while holding the lock,
then making a copy of the entry so that the lock can be released. Finally,
the copy of the entry is sent without locking:
lock();
entry = get_entry();
*copy = *entry;
unlock();
send_nlmsg(copy);
This way we can reuse the send_nlmsg() code in get_addr() interfaces
between the netlink PM and userspace PM. They only need to implement their
own get_addr() interfaces to hold the different locks, get the entry from
the different lists, then release the locks.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The address id is parsed both in mptcp_pm_nl_get_addr() and
mptcp_userspace_pm_get_addr(), this makes the code somewhat repetitive.
So this patch adds a new parameter 'id' for all get_addr() interfaces.
The address id is only parsed in mptcp_pm_nl_get_addr_doit(), then pass
it to both mptcp_pm_nl_get_addr() and mptcp_userspace_pm_get_addr().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The first parameters 'skb' of get_addr() interfaces are now useless
since mptcp_userspace_pm_get_sock() helper is used. This patch drops
these useless parameters of them.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Three netlink functions:
mptcp_pm_nl_get_addr_doit()
mptcp_pm_nl_get_addr_dumpit()
mptcp_pm_nl_set_flags_doit()
are generic, implemented for each PM, in-kernel PM and userspace PM. It's
clearer to move them from pm_netlink.c to pm.c.
And the linked three path manager wrappers
mptcp_pm_get_addr()
mptcp_pm_dump_addr()
mptcp_pm_set_flags()
can be changed as static functions, no need to export them in protocol.h.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
