Some manufacturers have intentionally put an EDID that differs from
the EDID on the internal panel on laptops.
Attempt to fetch this EDID if it exists and prefer it over the EDID
that is provided by the panel. If a user prefers to use the EDID from
the panel, offer a DC debugging parameter that would disable this.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of hw_fini.
Also update the ip_block ptr where ever needed as
there were cyclic dependency of hw_fini on suspend
and some followed clean up.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the *handle to amdgpu_ip_block ptr for all
functions pointers of hw_init.
Also update the ip_block ptr where ever needed as
there were cyclic dependency of hw_init on resume.
v2: squash in isp fix
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Idle power states (IPS) describe levels of power-gating within DCN. DM
and DC is responsible for ensuring that we are out of IPS before any DCN
programming happens. Any DCN programming while we're in IPS leads to
undefined behavior (mostly hangs).
Because IPS intersects with all display features, the ability to disable
IPS by default while ironing out the known issues is desired. However,
disabing it completely will cause important features such as s0ix entry
to fail.
Therefore, more granular IPS debug flags are desired.
[How]
Extend the dc debug mask bits to include the available list of IPS
debug flags.
All the flags should work as documented, with the exception of
IPS_DISABLE_DYNAMIC. It requires dm changes which will be done in
later changes.
v2: enable docs and fix docstring format
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
ISP hw block is supported in some of the AMD GPU versions, add support
to discover ISP IP in amdgpu_discovery.
v2: squash in documentation update (Alex)
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Pratap Nirujogi <pratap.nirujogi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add function description of the new functions added
in amd_ip_funcs.
new functions added are:
a. dump_ip_state
b. print_ip_state
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the prototype to dump ip registers
for all ips of different asics and set
them to NULL for now. Based on the
requirement add a function pointer for
each of them.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Enable the Panel Replay if eDP panel and ASIC support.
(prioritize Panel Replay over PSR)
[How]
- Setup the Panel Replay config during the device init
(prioritize Panel Replay over PSR).
- Separate the Replay init function into two functions
amdgpu_dm_link_setup_replay() and amdgpu_dm_set_replay_caps()
to fix the issue in the earlier commit that cause PSR and Replay
enabled at the same time.
Reviewed-by: Sun peng Li <sunpeng.li@amd.com>
Acked-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 44e60b14d5.
Since, it causes a regression in which eDP displays with PSR support,
but no Replay support (Sink support <= 0x03), fail to enable PSR and
consequently all IGT amd_psr tests fail. So, revert this until a more
suitable fix can be found.
This got brought back accidently with the backmerge.
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Ivan Lipski <ivlipski@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Some issues have been raised that appear to be tied to PSR-SU.
To allow users to confirm they're tied to PSR-SU without turning off
PSR entirely introduce a new debug mask:
amdgpu.dcdebugmask=0x200
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If any IP blocks allocate memory during their hw_fini() sequence
this can cause the suspend to fail under memory pressure. Introduce
a new phase that IP blocks can use to allocate memory before suspend
starts so that it can potentially be evicted into swap instead.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 44e60b14d5.
Since, it causes a regression in which eDP displays with PSR support,
but no Replay support (Sink support <= 0x03), fail to enable PSR and
consequently all IGT amd_psr tests fail. So, revert this until a more
suitable fix can be found.
Cc: stable@vger.kernel.org
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Ivan Lipski <ivlipski@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
AMD_IP_BLOCK_TYPE_VPE is a new IP BLOCK type for Video Processing Engine,
but currently lacks description.
Fix the documentation warning:
warning: Enum value 'AMD_IP_BLOCK_TYPE_VPE' not described in
enum 'amd_ip_block_type'
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Reviewed-by: Lang Yu <lang.yu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Setup replay config on device init.
- Enable replay if feature is enabled (prioritize replay over PSR, since
it can be enabled in more usecases)
- Add debug masks to enable replay on supported ASICs
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Setup replay config on device init.
- Enable replay if feature is enabled (prioritize replay over PSR, since
it can be enabled in more usecases)
- Add debug masks to enable replay on supported ASICs
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
It's useful to be able to enable DPIA trace with dcdebugmask
option, especially to debug DPIA issues involved in transition
of system power states.
This patch adds an option to amdgpu.dcdebugmask to be picked up
by amdgpu DM to enable DPIA trace.
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the accelerator PCIe class and match the
class in amdgpu for 0x1002 devices of that class.
From PCI spec:
"PCI Code and ID Assignment, r1.9, sec 1, 1.19"
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 80c6d6804f.
The orignal commit was intended as a workaround to prevent underflow and
flickering when using one normal monitor and the other high refresh rate
monitor (> 120Hz).
This patch is being reverted in favour of a software solution to enable
SubVP+DRR
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Temporarily disable SubVP+DRR since Xorg has an architectural limitation
where freesync will not work in a multi monitor configuration. SubVP+DRR
requires that freesync be working.
Whether OS has variable refresh setting enabled or not, the state on
the crtc remains same unless an application requests VRR. Due to this,
there is no way to know whether freesync will actually work or not
while we are on the desktop from the kernel's perspective.
If userspace does not have a limitation with multi-display freesync (for
example wayland), then this feature can be enabled by adding a
dcfeaturemask option to amdgpu on the kernel cmdline like:
amdgpu.dcfeaturemask=0x200
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
It's useful to disable MPO when debugging or testing. Therefore, add a
dcdebugmask option to disable MPO.
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This symbol is missing documentation:
drivers/gpu/drm/amd/include/amd_shared.h:224: warning: Enum value 'PP_GFX_DCS_MASK' not described in enum 'PP_FEATURE_MASK'
Document it.
Fixes: 680602d6c2 ("drm/amd/pm: enable DCS")
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
