To accommodate for legacy devices, we rely on the last state of a
transition to be valid:
for example when we test PEN_IS_OUT_OF_RANGE to PEN_IS_IN_CONTACT,
any "normal" device that reports an InRange bit would insert a
PEN_IS_IN_RANGE state between the 2.
This is of course valid, but this solution prevents to detect false
releases emitted by some firmware:
when pressing an "eraser mode" button, they might send an extra
PEN_IS_OUT_OF_RANGE that we may want to filter.
So define 2 sets of transitions: one that is the ideal behavior, and
one that is OK, it won't break user space, but we have serious doubts
if we are doing the right thing. And depending on the test, either
ask only for valid transitions, or tolerate weird ones.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20231206-wip-selftests-v2-13-c0350c2f5986@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Turns out that there are transitions that are unlikely to happen:
for example, having both the tip switch and a button being changed
at the same time (in the same report) would require either a very talented
and precise user or a very bad hardware with a very low sampling rate.
So instead of manually building the button test by hand and forgetting
about some cases, let's reuse the state machine and transitions we have.
This patch only adds the states and the valid transitions. The actual
tests will be replaced later.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20231206-wip-selftests-v2-10-c0350c2f5986@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Commit 05f1edac80 ("selftests/mm: run all tests from run_vmtests.sh")
fixed the inconsistency caused by tests being defined as TEST_GEN_PROGS.
This issue was leading to tests not being executed via run_vmtests.sh and
furthermore some tests running twice due to the kselftests wrapper also
executing them.
Fix the definition of two tests (soft-dirty and pagemap_ioctl) that are
still incorrectly defined.
Link: https://lkml.kernel.org/r/20231120222908.28559-1-npache@redhat.com
Signed-off-by: Nico Pache <npache@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Joel Savitz <jsavitz@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To stay consistent with the naming pattern used for similar cases in BPF
UAPI (__MAX_BPF_ATTACH_TYPE, etc), rename MAX_BPF_LINK_TYPE into
__MAX_BPF_LINK_TYPE.
Also similar to MAX_BPF_ATTACH_TYPE and MAX_BPF_REG, add:
#define MAX_BPF_LINK_TYPE __MAX_BPF_LINK_TYPE
Not all __MAX_xxx enums have such #define, so I'm not sure if we should
add it or not, but I figured I'll start with a completely backwards
compatible way, and we can drop that, if necessary.
Also adjust a selftest that used MAX_BPF_LINK_TYPE enum.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20231206190920.1651226-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding test that tries to trigger the BUG_IN during early map update
in prog_array_map_poke_run function.
The idea is to share prog array map between thread that constantly
updates it and another one loading a program that uses that prog
array.
Eventually we will hit a place where the program is ok to be updated
(poke->tailcall_target_stable check) but the address is still not
registered in kallsyms, so the bpf_arch_text_poke returns -EINVAL
and cause imbalance for the next tail call update check, which will
fail with -EBUSY in bpf_arch_text_poke as described in previous fix.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20231206083041.1306660-3-jolsa@kernel.org
Add a selftest that attempts to conceptually replicate intended BPF
token use cases inside user namespaced container.
Child process is forked. It is then put into its own userns and mountns.
Child creates BPF FS context object. This ensures child userns is
captured as the owning userns for this instance of BPF FS. Given setting
delegation mount options is privileged operation, we ensure that child
cannot set them.
This context is passed back to privileged parent process through Unix
socket, where parent sets up delegation options, creates, and mounts it
as a detached mount. This mount FD is passed back to the child to be
used for BPF token creation, which allows otherwise privileged BPF
operations to succeed inside userns.
We validate that all of token-enabled privileged commands (BPF_BTF_LOAD,
BPF_MAP_CREATE, and BPF_PROG_LOAD) work as intended. They should only
succeed inside the userns if a) BPF token is provided with proper
allowed sets of commands and types; and b) namespaces CAP_BPF and other
privileges are set. Lacking a) or b) should lead to -EPERM failures.
Based on suggested workflow by Christian Brauner ([0]).
[0] https://lore.kernel.org/bpf/20230704-hochverdient-lehne-eeb9eeef785e@brauner/
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-17-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add basic support of BPF token to BPF_PROG_LOAD. Wire through a set of
allowed BPF program types and attach types, derived from BPF FS at BPF
token creation time. Then make sure we perform bpf_token_capable()
checks everywhere where it's relevant.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-7-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow providing token_fd for BPF_MAP_CREATE command to allow controlled
BPF map creation from unprivileged process through delegated BPF token.
Wire through a set of allowed BPF map types to BPF token, derived from
BPF FS at BPF token creation time. This, in combination with allowed_cmds
allows to create a narrowly-focused BPF token (controlled by privileged
agent) with a restrictive set of BPF maps that application can attempt
to create.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231130185229.2688956-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Enhance partial_stack_load_preserves_zeros subtest with detailed
precision propagation log checks. We know expect fp-16 to be spilled,
initially imprecise, zero const register, which is later marked as
precise even when partial stack slot load is performed, even if it's not
a register fill (!).
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231205184248.1502704-10-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Validate that 1-, 2-, and 4-byte loads from stack slots not aligned on
8-byte boundary still preserve zero, when loading from all-STACK_ZERO
sub-slots, or when stack sub-slots are covered by spilled register with
known constant zero value.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231205184248.1502704-8-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new selftests that validates precision tracking for stack access
instruction, using both r10-based and non-r10-based accesses. For
non-r10 ones we also make sure to have non-zero var_off to validate that
final stack offset is tracked properly in instruction history
information inside verifier.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231205184248.1502704-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use instruction (jump) history to record instructions that performed
register spill/fill to/from stack, regardless if this was done through
read-only r10 register, or any other register after copying r10 into it
*and* potentially adjusting offset.
To make this work reliably, we push extra per-instruction flags into
instruction history, encoding stack slot index (spi) and stack frame
number in extra 10 bit flags we take away from prev_idx in instruction
history. We don't touch idx field for maximum performance, as it's
checked most frequently during backtracking.
This change removes basically the last remaining practical limitation of
precision backtracking logic in BPF verifier. It fixes known
deficiencies, but also opens up new opportunities to reduce number of
verified states, explored in the subsequent patches.
There are only three differences in selftests' BPF object files
according to veristat, all in the positive direction (less states).
File Program Insns (A) Insns (B) Insns (DIFF) States (A) States (B) States (DIFF)
-------------------------------------- ------------- --------- --------- ------------- ---------- ---------- -------------
test_cls_redirect_dynptr.bpf.linked3.o cls_redirect 2987 2864 -123 (-4.12%) 240 231 -9 (-3.75%)
xdp_synproxy_kern.bpf.linked3.o syncookie_tc 82848 82661 -187 (-0.23%) 5107 5073 -34 (-0.67%)
xdp_synproxy_kern.bpf.linked3.o syncookie_xdp 85116 84964 -152 (-0.18%) 5162 5130 -32 (-0.62%)
Note, I avoided renaming jmp_history to more generic insn_hist to
minimize number of lines changed and potential merge conflicts between
bpf and bpf-next trees.
Notice also cur_hist_entry pointer reset to NULL at the beginning of
instruction verification loop. This pointer avoids the problem of
relying on last jump history entry's insn_idx to determine whether we
already have entry for current instruction or not. It can happen that we
added jump history entry because current instruction is_jmp_point(), but
also we need to add instruction flags for stack access. In this case, we
don't want to entries, so we need to reuse last added entry, if it is
present.
Relying on insn_idx comparison has the same ambiguity problem as the one
that was fixed recently in [0], so we avoid that.
[0] https://patchwork.kernel.org/project/netdevbpf/patch/20231110002638.4168352-3-andrii@kernel.org/
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Reported-by: Tao Lyu <tao.lyu@epfl.ch>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231205184248.1502704-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
xdp_metadata test is flaky sometimes:
verify_xsk_metadata:FAIL:rx_hash_type unexpected rx_hash_type: actual 8 != expected 0
Where 8 means XDP_RSS_TYPE_L4_ANY and is exported from veth driver only when
'skb->l4_hash' condition is met. This makes me think that the program is
triggering again for some other packet.
Let's have a filter, similar to xdp_hw_metadata, where we trigger XDP kfuncs
only for UDP packets destined to port 8080.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20231204174423.3460052-1-sdf@google.com
There was some confusion amongst Meta sched_ext folks regarding whether
stashing bpf_rb_root - the tree itself, rather than a single node - was
supported. This patch adds a small test which demonstrates this
functionality: a local kptr with rb_root is created, a node is created
and added to the tree, then the tree is kptr_xchg'd into a mapval.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20231204211722.571346-1-davemarchevsky@fb.com
Here is the test result after conversion.
# ./unicast_extensions.sh
/usr/bin/which: no nettest in (/root/.local/bin:/root/bin:/usr/share/Modules/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin)
###########################################################################
Unicast address extensions tests (behavior of reserved IPv4 addresses)
###########################################################################
TEST: assign and ping within 240/4 (1 of 2) (is allowed) [ OK ]
TEST: assign and ping within 240/4 (2 of 2) (is allowed) [ OK ]
TEST: assign and ping within 0/8 (1 of 2) (is allowed) [ OK ]
...
TEST: assign and ping class D address (is forbidden) [ OK ]
TEST: routing using class D (is forbidden) [ OK ]
TEST: routing using 127/8 (is forbidden) [ OK ]
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
]# ./sctp_vrf.sh
Testing For SCTP VRF:
TEST 01: nobind, connect from client 1, l3mdev_accept=1, Y [PASS]
...
TEST 12: bind vrf-2 & 1 in server, connect from client 1 & 2, N [PASS]
***v6 Tests Done***
Acked-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
]# ./l2tp.sh
TEST: IPv4 basic L2TP tunnel [ OK ]
TEST: IPv4 route through L2TP tunnel [ OK ]
TEST: IPv6 basic L2TP tunnel [ OK ]
TEST: IPv6 route through L2TP tunnel [ OK ]
TEST: IPv4 basic L2TP tunnel - with IPsec [ OK ]
TEST: IPv4 route through L2TP tunnel - with IPsec [ OK ]
TEST: IPv6 basic L2TP tunnel - with IPsec [ OK ]
TEST: IPv6 route through L2TP tunnel - with IPsec [ OK ]
TEST: IPv4 basic L2TP tunnel [ OK ]
TEST: IPv4 route through L2TP tunnel [ OK ]
TEST: IPv6 basic L2TP tunnel - with IPsec [ OK ]
TEST: IPv6 route through L2TP tunnel - with IPsec [ OK ]
TEST: IPv4 basic L2TP tunnel - after IPsec teardown [ OK ]
TEST: IPv4 route through L2TP tunnel - after IPsec teardown [ OK ]
TEST: IPv6 basic L2TP tunnel - after IPsec teardown [ OK ]
TEST: IPv6 route through L2TP tunnel - after IPsec teardown [ OK ]
Tests passed: 16
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Reviewed-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
]# ./ioam6.sh
--------------------------------------------------------------------------
OUTPUT tests
--------------------------------------------------------------------------
TEST: Unknown IOAM namespace (inline mode) [ OK ]
TEST: Unknown IOAM namespace (encap mode) [ OK ]
TEST: Missing trace room (inline mode) [ OK ]
TEST: Missing trace room (encap mode) [ OK ]
TEST: Trace type with bit 0 only (inline mode) [ OK ]
...
TEST: Full supported trace (encap mode) [ OK ]
--------------------------------------------------------------------------
GLOBAL tests
--------------------------------------------------------------------------
TEST: Forward - Full supported trace (inline mode) [ OK ]
TEST: Forward - Full supported trace (encap mode) [ OK ]
- Tests passed: 88
- Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Justin Iurman <justin.iurman@uliege.be>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
# ./icmp_redirect.sh
###########################################################################
Legacy routing
###########################################################################
TEST: IPv4: redirect exception [ OK ]
...
TEST: IPv4: mtu exception plus redirect [ OK ]
TEST: IPv6: mtu exception plus redirect [ OK ]
Tests passed: 40
Tests failed: 0
Tests xfailed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
]# ./traceroute.sh
TEST: IPV6 traceroute [ OK ]
TEST: IPV4 traceroute [ OK ]
Tests passed: 2
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
]# ./drop_monitor_tests.sh
Software drops test
TEST: Capturing active software drops [ OK ]
TEST: Capturing inactive software drops [ OK ]
Hardware drops test
TEST: Capturing active hardware drops [ OK ]
TEST: Capturing inactive hardware drops [ OK ]
Tests passed: 4
Tests failed: 0
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
]# ./cmsg_ipv6.sh
OK
]# ./cmsg_so_mark.sh
OK
]# ./cmsg_time.sh
OK
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
2 tests also failed without this patch
]# ./arp_ndisc_untracked_subnets.sh
TEST: test_arp: accept_arp=0 [ OK ]
TEST: test_arp: accept_arp=1 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=0 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=1 [ OK ]
TEST: test_ndisc: accept_untracked_na=0 [ OK ]
TEST: test_ndisc: accept_untracked_na=1 [ OK ]
TEST: test_ndisc: accept_untracked_na=2 same_subnet=0 [ OK ]
TEST: test_ndisc: accept_untracked_na=2 same_subnet=1 [ OK ]
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When do arping, the interface need to be specified. Or we will
get error: Interface "lo" is not ARPable. And the test failed.
]# ./arp_ndisc_untracked_subnets.sh
TEST: test_arp: accept_arp=0 [ OK ]
TEST: test_arp: accept_arp=1 [FAIL]
TEST: test_arp: accept_arp=2 same_subnet=0 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=1 [FAIL]
After fix:
]# ./arp_ndisc_untracked_subnets.sh
TEST: test_arp: accept_arp=0 [ OK ]
TEST: test_arp: accept_arp=1 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=0 [ OK ]
TEST: test_arp: accept_arp=2 same_subnet=1 [ OK ]
Fixes: 0ea7b0a454 ("selftests: net: arp_ndisc_untracked_subnets: test for arp_accept and accept_untracked_na")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here is the test result after conversion.
]# ./arp_ndisc_evict_nocarrier.sh
run arp_evict_nocarrier=1 test
ok
run arp_evict_nocarrier=0 test
ok
run all.arp_evict_nocarrier=0 test
ok
run ndisc_evict_nocarrier=1 test
ok
run ndisc_evict_nocarrier=0 test
ok
run all.ndisc_evict_nocarrier=0 test
ok
Acked-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a lib.sh for net selftests. This file can be used to define commonly
used variables and functions. Some commonly used functions can be moved
from forwarding/lib.sh to this lib file. e.g. busywait().
Add function setup_ns() for user to create unique namespaces with given
prefix name.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Syscall program is running with rcu_read_lock_trace being held, so if
bpf_map_update_elem() or bpf_map_delete_elem() invokes
synchronize_rcu_tasks_trace() when operating on an outer map, there will
be dead-lock, so add a test to guarantee that it is dead-lock free.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231204140425.1480317-8-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add test cases to test the race between the destroy of inner map due to
map-in-map update and the access of inner map in bpf program. The
following 4 combinations are added:
(1) array map in map array + bpf program
(2) array map in map array + sleepable bpf program
(3) array map in map htab + bpf program
(4) array map in map htab + sleepable bpf program
Before applying the fixes, when running `./test_prog -a map_in_map`, the
following error was reported:
==================================================================
BUG: KASAN: slab-use-after-free in array_map_update_elem+0x48/0x3e0
Read of size 4 at addr ffff888114f33824 by task test_progs/1858
CPU: 1 PID: 1858 Comm: test_progs Tainted: G O 6.6.0+ #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ......
Call Trace:
<TASK>
dump_stack_lvl+0x4a/0x90
print_report+0xd2/0x620
kasan_report+0xd1/0x110
__asan_load4+0x81/0xa0
array_map_update_elem+0x48/0x3e0
bpf_prog_be94a9f26772f5b7_access_map_in_array+0xe6/0xf6
trace_call_bpf+0x1aa/0x580
kprobe_perf_func+0xdd/0x430
kprobe_dispatcher+0xa0/0xb0
kprobe_ftrace_handler+0x18b/0x2e0
0xffffffffc02280f7
RIP: 0010:__x64_sys_getpgid+0x1/0x30
......
</TASK>
Allocated by task 1857:
kasan_save_stack+0x26/0x50
kasan_set_track+0x25/0x40
kasan_save_alloc_info+0x1e/0x30
__kasan_kmalloc+0x98/0xa0
__kmalloc_node+0x6a/0x150
__bpf_map_area_alloc+0x141/0x170
bpf_map_area_alloc+0x10/0x20
array_map_alloc+0x11f/0x310
map_create+0x28a/0xb40
__sys_bpf+0x753/0x37c0
__x64_sys_bpf+0x44/0x60
do_syscall_64+0x36/0xb0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Freed by task 11:
kasan_save_stack+0x26/0x50
kasan_set_track+0x25/0x40
kasan_save_free_info+0x2b/0x50
__kasan_slab_free+0x113/0x190
slab_free_freelist_hook+0xd7/0x1e0
__kmem_cache_free+0x170/0x260
kfree+0x9b/0x160
kvfree+0x2d/0x40
bpf_map_area_free+0xe/0x20
array_map_free+0x120/0x2c0
bpf_map_free_deferred+0xd7/0x1e0
process_one_work+0x462/0x990
worker_thread+0x370/0x670
kthread+0x1b0/0x200
ret_from_fork+0x3a/0x70
ret_from_fork_asm+0x1b/0x30
Last potentially related work creation:
kasan_save_stack+0x26/0x50
__kasan_record_aux_stack+0x94/0xb0
kasan_record_aux_stack_noalloc+0xb/0x20
__queue_work+0x331/0x950
queue_work_on+0x75/0x80
bpf_map_put+0xfa/0x160
bpf_map_fd_put_ptr+0xe/0x20
bpf_fd_array_map_update_elem+0x174/0x1b0
bpf_map_update_value+0x2b7/0x4a0
__sys_bpf+0x2551/0x37c0
__x64_sys_bpf+0x44/0x60
do_syscall_64+0x36/0xb0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231204140425.1480317-7-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull iommufd fixes from Jason Gunthorpe:
- A small fix for the dirty tracking self test to fail correctly if the
code is buggy
- Fix a tricky syzkaller race UAF with object reference counting
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Do not UAF during iommufd_put_object()
iommufd: Add iommufd_ctx to iommufd_put_object()
iommufd/selftest: Fix _test_mock_dirty_bitmaps()
