The memory layout of struct vfio_device_ioeventfd is
architecture-dependent due to a u64 field and a struct size that is not
a multiple of 8 bytes:
- On x86_64 the struct size is padded to a multiple of 8 bytes.
- On x32 the struct size is only a multiple of 4 bytes, not 8.
- Other architectures may vary.
Use __aligned_u64 to make memory layout consistent. This reduces the
chance that 32-bit userspace on a 64-bit kernel breakage.
This patch increases the struct size on x32 but this is safe because of
the struct's argsz field. The kernel may grow the struct as long as it
still supports smaller argsz values from userspace (e.g. applications
compiled against older kernel headers).
The code that uses struct vfio_device_ioeventfd already works correctly
when the struct size grows, so only the struct definition needs to be
changed.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20230918205617.1478722-4-stefanha@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
The memory layout of struct vfio_device_gfx_plane_info is
architecture-dependent due to a u64 field and a struct size that is not
a multiple of 8 bytes:
- On x86_64 the struct size is padded to a multiple of 8 bytes.
- On x32 the struct size is only a multiple of 4 bytes, not 8.
- Other architectures may vary.
Use __aligned_u64 to make memory layout consistent. This reduces the
chance of 32-bit userspace on a 64-bit kernel breakage.
This patch increases the struct size on x32 but this is safe because of
the struct's argsz field. The kernel may grow the struct as long as it
still supports smaller argsz values from userspace (e.g. applications
compiled against older kernel headers).
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20230918205617.1478722-3-stefanha@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
u64 alignment behaves differently depending on the architecture and so
<uapi/linux/types.h> offers __aligned_u64 to achieve consistent behavior
in kernel<->userspace ABIs.
There are structs in <uapi/linux/vfio.h> that can trivially be updated
to __aligned_u64 because the struct sizes are multiples of 8 bytes.
There is no change in memory layout on any CPU architecture and
therefore this change is safe.
The commits that follow this one handle the trickier cases where
explanation about ABI breakage is necessary.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20230918205617.1478722-2-stefanha@redhat.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Pull in locking/core from the tip tree, to get the futex2 dependencies
from Peter Zijlstra.
* 'locking/core' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
locking/ww_mutex/test: Make sure we bail out instead of livelock
locking/ww_mutex/test: Fix potential workqueue corruption
locking/ww_mutex/test: Use prng instead of rng to avoid hangs at bootup
futex: Add sys_futex_requeue()
futex: Add flags2 argument to futex_requeue()
futex: Propagate flags into get_futex_key()
futex: Add sys_futex_wait()
futex: FLAGS_STRICT
futex: Add sys_futex_wake()
futex: Validate futex value against futex size
futex: Flag conversion
futex: Extend the FUTEX2 flags
futex: Clarify FUTEX2 flags
asm-generic: ticket-lock: Optimize arch_spin_value_unlocked()
futex/pi: Fix recursive rt_mutex waiter state
locking/rtmutex: Add a lockdep assert to catch potential nested blocking
locking/rtmutex: Use rt_mutex specific scheduler helpers
sched: Provide rt_mutex specific scheduler helpers
sched: Extract __schedule_loop()
locking/rtmutex: Avoid unconditional slowpath for DEBUG_RT_MUTEXES
...
* for-6.7/io_uring:
io_uring: cancelable uring_cmd
io_uring: retain top 8bits of uring_cmd flags for kernel internal use
io_uring: add IORING_OP_WAITID support
exit: add internal include file with helpers
exit: add kernel_waitid_prepare() helper
exit: move core of do_wait() into helper
exit: abstract out should_wake helper for child_wait_callback()
io_uring/rw: add support for IORING_OP_READ_MULTISHOT
io_uring/rw: mark readv/writev as vectored in the opcode definition
io_uring/rw: split io_read() into a helper
Retain top 8bits of uring_cmd flags for kernel internal use, so that we
can move IORING_URING_CMD_POLLED out of uapi header.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Create controls for Nuvoton NPCM video driver to support setting
capture mode of Video Capture/Differentiation (VCD) engine and getting
the count of HEXTILE rectangles that is compressed by Encoding
Compression Engine (ECE).
Signed-off-by: Marvin Lin <milkfafa@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add a control base for Nuvoton NPCM driver controls, and reserve 16
controls.
Signed-off-by: Marvin Lin <milkfafa@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add HEXTILE compressed format which is defined in Remote Framebuffer
Protocol (RFC 6143, chapter 7.7.4 Hextile Encoding) and is used by
Encoding Compression Engine (ECE) present on Nuvoton NPCM SoCs.
Signed-off-by: Marvin Lin <milkfafa@gmail.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Until now, fscrypt has always used the filesystem block size as the
granularity of file contents encryption. Two scenarios have come up
where a sub-block granularity of contents encryption would be useful:
1. Inline crypto hardware that only supports a crypto data unit size
that is less than the filesystem block size.
2. Support for direct I/O at a granularity less than the filesystem
block size, for example at the block device's logical block size in
order to match the traditional direct I/O alignment requirement.
(1) first came up with older eMMC inline crypto hardware that only
supports a crypto data unit size of 512 bytes. That specific case
ultimately went away because all systems with that hardware continued
using out of tree code and never actually upgraded to the upstream
inline crypto framework. But, now it's coming back in a new way: some
current UFS controllers only support a data unit size of 4096 bytes, and
there is a proposal to increase the filesystem block size to 16K.
(2) was discussed as a "nice to have" feature, though not essential,
when support for direct I/O on encrypted files was being upstreamed.
Still, the fact that this feature has come up several times does suggest
it would be wise to have available. Therefore, this patch implements it
by using one of the reserved bytes in fscrypt_policy_v2 to allow users
to select a sub-block data unit size. Supported data unit sizes are
powers of 2 between 512 and the filesystem block size, inclusively.
Support is implemented for both the FS-layer and inline crypto cases.
This patch focuses on the basic support for sub-block data units. Some
things are out of scope for this patch but may be addressed later:
- Supporting sub-block data units in combination with
FSCRYPT_POLICY_FLAG_IV_INO_LBLK_64, in most cases. Unfortunately this
combination usually causes data unit indices to exceed 32 bits, and
thus fscrypt_supported_policy() correctly disallows it. The users who
potentially need this combination are using f2fs. To support it, f2fs
would need to provide an option to slightly reduce its max file size.
- Supporting sub-block data units in combination with
FSCRYPT_POLICY_FLAG_IV_INO_LBLK_32. This has the same problem
described above, but also it will need special code to make DUN
wraparound still happen on a FS block boundary.
- Supporting use case (2) mentioned above. The encrypted direct I/O
code will need to stop requiring and assuming FS block alignment.
This won't be hard, but it belongs in a separate patch.
- Supporting this feature on filesystems other than ext4 and f2fs.
(Filesystems declare support for it via their fscrypt_operations.)
On UBIFS, sub-block data units don't make sense because UBIFS encrypts
variable-length blocks as a result of compression. CephFS could
support it, but a bit more work would be needed to make the
fscrypt_*_block_inplace functions play nicely with sub-block data
units. I don't think there's a use case for this on CephFS anyway.
Link: https://lore.kernel.org/r/20230925055451.59499-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Add missed value to kprobe attached through perf link info to
hold the stats of missed kprobe handler execution.
The kprobe's missed counter gets incremented when kprobe handler
is not executed due to another kprobe running on the same cpu.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230920213145.1941596-4-jolsa@kernel.org
The deta angle and deta velocity channels were added in parallel with
color temperature and chromacity so this merge had to assign a
consistent order. I put the color related ones second.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Once a BO is attached with slicing configuration that BO can only be used
for that particular setting. With this new feature user can detach slicing
configuration off an already sliced BO and attach new slicing configuration
using QAIC_ATTACH_SLICE_BO.
This will support BO recycling.
detach_slice_bo() detaches slicing configuration from a BO. This new
helper function can also be used in release_dbc() as we are doing the
exact same thing.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
[jhugo: add documentation for new ioctl]
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901172247.11410-8-quic_jhugo@quicinc.com
->size field in struct qaic_bo stores user requested buffer size for
allocate path or size of the dmabuf(PRIME). Now for allocate path driver
allocates a BO of size which is PAGE_SIZE aligned, this size is already
stored in base BO structure (struct drm_gem_object).
So difference is ->size of struct qaic_bo stores the raw value coming from
user and ->size in struct drm_gem_object stores the PAGE_SZIE aligned size.
Do not use ->size from struct qaic_bo for any validation or operation
instead use ->size from struct drm_gem_object since we already have
allocated that much memory then why not use it. Only validate if user
is trying to use more then the BO size. This make the driver more flexible.
After this change ->size field of struct qaic_bo becomes redundant. Remove
it.
Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901172247.11410-2-quic_jhugo@quicinc.com
drm-misc-next for v6.7-rc1:
UAPI Changes:
- Nouveau changed to not set NO_PREFETCH flag explicitly.
Cross-subsystem Changes:
- Update documentation of dma-buf intro and uapi.
- fbdev/sbus fixes.
- Use initializer macros in a lot of fbdev drivers.
- Add Boris Brezillon as Panfrost driver maintainer.
- Add Jessica Zhang as drm/panel reviewer.
- Make more fbdev drivers use fb_ops helpers for deferred io.
- Small hid trailing whitespace fix.
- Use fb_ops in hid/picolcd
Core Changes:
- Assorted small fixes to ttm tests, drm/mst.
- Documentation updates to bridge.
- Add kunit tests for some drm_fb functions.
- Rework drm_debugfs implementation.
- Update xe documentation to mark todos as completed.
Driver Changes:
- Add support to rockchip for rv1126 mipi-dsi and vop.
- Assorted small fixes to nouveau, bridge/samsung-dsim,
bridge/lvds-codec, loongson, rockchip, panfrost, gma500, repaper,
komeda, virtio, ssd130x.
- Add support for simple panels Mitsubishi AA084XE01,
JDI LPM102A188A,
- Documentation updates to accel/ivpu.
- Some nouveau scheduling/fence fixes.
- Power management related fixes and other fixes to ivpu.
- Assorted bridge/it66121 fixes.
- Make platform drivers return void in remove() callback.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3da6554b-3b47-fe7d-c4ea-21f4f819dbb6@linux.intel.com
This adds support for an async version of waitid(2), in a fully async
version. If an event isn't immediately available, wait for a callback
to trigger a retry.
The format of the sqe is as follows:
sqe->len The 'which', the idtype being queried/waited for.
sqe->fd The 'pid' (or id) being waited for.
sqe->file_index The 'options' being set.
sqe->addr2 A pointer to siginfo_t, if any, being filled in.
buf_index, add3, and waitid_flags are reserved/unused for now.
waitid_flags will be used for options for this request type. One
interesting use case may be to add multi-shot support, so that the
request stays armed and posts a notification every time a monitored
process state change occurs.
Note that this does not support rusage, on Arnd's recommendation.
See the waitid(2) man page for details on the arguments.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This behaves like IORING_OP_READ, except:
1) It only supports pollable files (eg pipes, sockets, etc). Note that
for sockets, you probably want to use recv/recvmsg with multishot
instead.
2) It supports multishot mode, meaning it will repeatedly trigger a
read and fill a buffer when data is available. This allows similar
use to recv/recvmsg but on non-sockets, where a single request will
repeatedly post a CQE whenever data is read from it.
3) Because of #2, it must be used with provided buffers. This is
uniformly true across any request type that supports multishot and
transfers data, with the reason being that it's obviously not
possible to pass in a single buffer for the data, as multiple reads
may very well trigger before an application has a chance to process
previous CQEs and the data passed from them.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Finish off the 'simple' futex2 syscall group by adding
sys_futex_requeue(). Unlike sys_futex_{wait,wake}() its arguments are
too numerous to fit into a regular syscall. As such, use struct
futex_waitv to pass the 'source' and 'destination' futexes to the
syscall.
This syscall implements what was previously known as FUTEX_CMP_REQUEUE
and uses {val, uaddr, flags} for source and {uaddr, flags} for
destination.
This design explicitly allows requeueing between different types of
futex by having a different flags word per uaddr.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230921105248.511860556@noisy.programming.kicks-ass.net
To complement sys_futex_waitv()/wake(), add sys_futex_wait(). This
syscall implements what was previously known as FUTEX_WAIT_BITSET
except it uses 'unsigned long' for the value and bitmask arguments,
takes timespec and clockid_t arguments for the absolute timeout and
uses FUTEX2 flags.
The 'unsigned long' allows FUTEX2_SIZE_U64 on 64bit platforms.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230921105248.164324363@noisy.programming.kicks-ass.net
sys_futex_waitv() is part of the futex2 series (the first and only so
far) of syscalls and has a flags field per futex (as opposed to flags
being encoded in the futex op).
This new flags field has a new namespace, which unfortunately isn't
super explicit. Notably it currently takes FUTEX_32 and
FUTEX_PRIVATE_FLAG.
Introduce the FUTEX2 namespace to clarify this
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20230921105247.507327749@noisy.programming.kicks-ass.net
Add support to dump SRQ resource in raw format. It enable drivers to
return the entire device specific SRQ context without setting each
field separately.
Example:
$ rdma res show srq -r
dev hns3 149000...
$ rdma res show srq -j -r
[{"ifindex":0,"ifname":"hns3","data":[149,0,0,...]}]
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Link: https://lore.kernel.org/r/20230918131110.3987498-3-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
6 GHz regulatory domains introduces Power Spectral Density (PSD).
The PSD value of the regulatory rule should be taken into effect
for the ieee80211_channels falling into that particular regulatory
rule. Save the values in the channel which has PSD value and add
nl80211 attributes accordingly to handle it.
Co-developed-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Signed-off-by: Wen Gong <quic_wgong@quicinc.com>
Link: https://lore.kernel.org/r/20230914082026.3709-1-quic_wgong@quicinc.com
[use hole in chan flags, reword docs]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Alexei Starovoitov says:
====================
The following pull-request contains BPF updates for your *net-next* tree.
We've added 73 non-merge commits during the last 9 day(s) which contain
a total of 79 files changed, 5275 insertions(+), 600 deletions(-).
The main changes are:
1) Basic BTF validation in libbpf, from Andrii Nakryiko.
2) bpf_assert(), bpf_throw(), exceptions in bpf progs, from Kumar Kartikeya Dwivedi.
3) next_thread cleanups, from Oleg Nesterov.
4) Add mcpu=v4 support to arm32, from Puranjay Mohan.
5) Add support for __percpu pointers in bpf progs, from Yonghong Song.
6) Fix bpf tailcall interaction with bpf trampoline, from Leon Hwang.
7) Raise irq_work in bpf_mem_alloc while irqs are disabled to improve refill probabablity, from Hou Tao.
Please consider pulling these changes from:
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next.git
Thanks a lot!
Also thanks to reporters, reviewers and testers of commits in this pull-request:
Alan Maguire, Andrey Konovalov, Dave Marchevsky, "Eric W. Biederman",
Jiri Olsa, Maciej Fijalkowski, Quentin Monnet, Russell King (Oracle),
Song Liu, Stanislav Fomichev, Yonghong Song
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce a new helper devl_port_fn_devlink_set() to be used by driver
assigning a devlink instance to the peer devlink port function.
Expose this to user over new netlink attribute nested under port
function nest to expose devlink handle related to the port function.
This is particularly helpful for user to understand the relationship
between devlink instances created for SFs and the port functions
they belong to.
Note that caller of devlink_port_notify() needs to hold devlink
instance lock, put the assertion to devl_port_fn_devlink_set() to make
this requirement explicit. Also note the limitations that only allow to
make this assignment for registered objects.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case netdevice represents a SyncE port, the user needs to understand
the connection between netdevice and associated DPLL pin. There might me
multiple netdevices pointing to the same pin, in case of VF/SF
implementation.
Add a IFLA Netlink attribute to nest the DPLL pin handle, similar to
how it is implemented for devlink port. Add a struct dpll_pin pointer
to netdev and protect access to it by RTNL. Expose netdev_dpll_pin_set()
and netdev_dpll_pin_clear() helpers to the drivers so they can set/clear
the DPLL pin relationship to netdev.
Note that during the lifetime of struct dpll_pin the pin handle does not
change. Therefore it is save to access it lockless. It is drivers
responsibility to call netdev_dpll_pin_clear() before dpll_pin_put().
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 2023 SIGCOMM paper "Improving Network Availability with Protective
ReRoute" has indicated Linux TCP's RTO-triggered txhash rehashing can
effectively reduce application disruption during outages. To better
measure the efficacy of this feature, this patch adds three more
detailed stats during RTO recovery and exports via TCP_INFO.
Applications and monitoring systems can leverage this data to measure
the network path diversity and end-to-end repair latency during network
outages to improve their network infrastructure.
The following counters are added to tcp_sock in order to track RTO
events over the lifetime of a TCP socket.
1. u16 total_rto - Counts the total number of RTO timeouts.
2. u16 total_rto_recoveries - Counts the total number of RTO recoveries.
3. u32 total_rto_time - Counts the total time spent (ms) in RTO
recoveries. (time spent in CA_Loss and
CA_Recovery states)
To compute total_rto_time, we add a new u32 rto_stamp field to
tcp_sock. rto_stamp records the start timestamp (ms) of the last RTO
recovery (CA_Loss).
Corresponding fields are also added to the tcp_info struct.
Signed-off-by: Aananth V <aananthv@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexei Starovoitov says:
====================
The following pull-request contains BPF updates for your *net* tree.
We've added 21 non-merge commits during the last 8 day(s) which contain
a total of 21 files changed, 450 insertions(+), 36 deletions(-).
The main changes are:
1) Adjust bpf_mem_alloc buckets to match ksize(), from Hou Tao.
2) Check whether override is allowed in kprobe mult, from Jiri Olsa.
3) Fix btf_id symbol generation with ld.lld, from Jiri and Nick.
4) Fix potential deadlock when using queue and stack maps from NMI, from Toke Høiland-Jørgensen.
Please consider pulling these changes from:
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf.git
Thanks a lot!
Also thanks to reporters, reviewers and testers of commits in this pull-request:
Alan Maguire, Biju Das, Björn Töpel, Dan Carpenter, Daniel Borkmann,
Eduard Zingerman, Hsin-Wei Hung, Marcus Seyfarth, Nathan Chancellor,
Satya Durga Srinivasu Prabhala, Song Liu, Stephen Rothwell
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add new xdp-rx-metadata-features member to netdev netlink
which exports a bitmask of supported kfuncs. Most of the patch
is autogenerated (headers), the only relevant part is netdev.yaml
and the changes in netdev-genl.c to marshal into netlink.
Example output on veth:
$ ip link add veth0 type veth peer name veth1 # ifndex == 12
$ ./tools/net/ynl/samples/netdev 12
Select ifc ($ifindex; or 0 = dump; or -2 ntf check): 12
veth1[12] xdp-features (23): basic redirect rx-sg xdp-rx-metadata-features (3): timestamp hash xdp-zc-max-segs=0
Cc: netdev@vger.kernel.org
Cc: Willem de Bruijn <willemb@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/20230913171350.369987-3-sdf@google.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
__DECLARE_FLEX_ARRAY(T, member) macro expands to
struct {
struct {} __empty_member;
T member[];
};
which is subtly wrong in C++ because sizeof(struct{}) is 1 not 0,
changing UAPI structures layouts.
This can be fixed by expanding to
T member[];
Now g++ doesn't like "T member[]" either, throwing errors on
the following code:
struct S {
union {
T1 member1[];
T2 member2[];
};
};
or
struct S {
T member[];
};
Use "T member[0];" which seems to work and does the right thing wrt
structure layout.
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Fixes: 3080ea5553 ("stddef: Introduce DECLARE_FLEX_ARRAY() helper")
Link: https://lore.kernel.org/r/97242381-f1ec-4a4a-9472-1a464f575657@p183
Signed-off-by: Kees Cook <keescook@chromium.org>
Add a new flag 'update' which is set to true during start_ap()
if (and only if) one of the following two conditions are met:
- Userspace passed an empty nested attribute which indicates that
the feature should be disabled and templates deleted.
- Userspace passed all the parameters for the nested attribute.
Existing configuration will not be changed while the flag
remains false.
Add similar changes for unsolicited broadcast probe response
transmission.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20230727174100.11721-2-quic_alokad@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There really isn't any support for scanning at different
channel widths than 20 MHz since there's no way to set it.
Remove this support for now, if somebody wants to maintain
this whole thing later we can revisit how it should work.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The delta velocity is defined as a piece-wise integration of
acceleration data. The delta velocity represents the linear velocity
change between two consecutive measurements and it
is measured in m / s (meters per second).
In order to track the total linear velocity change during a desired
period of time, simply sum-up the delta velocity samples acquired
during that time.
IIO currently does not offer a suitable channel type for this
type of measurements hence this patch adds it.
Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230808075059.645525-3-ramona.bolboaca@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The delta angle is defined as a piece-wise integration of angular
velocity data. The delta angle represents the amount of
angular displacement between two consecutive measurements and it
is measured in radians.
In order to track the total angular displacement during a desired
period of time, simply sum-up the delta angle samples acquired
during that time.
IIO currently does not offer a suitable channel type for this
type of measurements hence this patch adds it.
Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230808075059.645525-2-ramona.bolboaca@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Commit 151e887d8f ("veth: Fixing transmit return status for dropped
packets") exposed the fact that bpf_clone_redirect is capable of
returning raw NET_XMIT_XXX return codes.
This is in the conflict with its UAPI doc which says the following:
"0 on success, or a negative error in case of failure."
Update the UAPI to reflect the fact that bpf_clone_redirect can
return positive error numbers, but don't explicitly define
their meaning.
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230911194731.286342-1-sdf@google.com
