mirror of
https://github.com/torvalds/linux.git
synced 2025-12-07 20:06:24 +00:00
master
1410962 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Jarkko Sakkinen
|
bda1cbf73c |
tpm2-sessions: Fix tpm2_read_public range checks
tpm2_read_public() has some rudimentary range checks but the function does
not ensure that the response buffer has enough bytes for the full TPMT_HA
payload.
Re-implement the function with necessary checks and validation, and return
name and name size for all handle types back to the caller.
Cc: stable@vger.kernel.org # v6.10+
Fixes:
|
||
|
Jarkko Sakkinen
|
6e9722e9a7 |
tpm2-sessions: Fix out of range indexing in name_size
'name_size' does not have any range checks, and it just directly indexes
with TPM_ALG_ID, which could lead into memory corruption at worst.
Address the issue by only processing known values and returning -EINVAL for
unrecognized values.
Make also 'tpm_buf_append_name' and 'tpm_buf_fill_hmac_session' fallible so
that errors are detected before causing any spurious TPM traffic.
End also the authorization session on failure in both of the functions, as
the session state would be then by definition corrupted.
Cc: stable@vger.kernel.org # v6.10+
Fixes:
|
||
|
Linus Torvalds
|
2061f18ad7 |
Merge tag 'caps-pr-20251204' of git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux
Pull capabilities update from Serge Hallyn:
"Ryan Foster had sent a patch to add testing of the
rootid_owns_currentns() function. That patch pointed out
that this function was not as clear as it should be. Fix it:
- Clarify the intent of the function in the name
- Split the function so that the base functionality is easier to test
from a kunit test"
* tag 'caps-pr-20251204' of git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux:
Clarify the rootid_owns_currentns
|
||
|
Linus Torvalds
|
deb879faa9 |
Merge tag 'drm-next-2025-12-05' of https://gitlab.freedesktop.org/drm/kernel
Pull more drm updates from Dave Airlie: "There was some additional intel code for color operations we wanted to land. However I discovered I missed a pull for the xe vfio driver which I had sorted into 6.20 in my brain, until Thomas mentioned it. This contains the xe vfio code, a bunch of xe fixes that were waiting and the i915 color management support. I'd like to include it as part of keeping the two main vendors on the same page and giving a good cross-driver experience for userspace when it starts using it. vfio: - add a vfio_pci variant driver for Intel xe/i915 display: - add plane color management support xe: - Add scope-based cleanup helper for runtime PM - vfio xe driver prerequisites and exports - fix vfio link error - Fix a memory leak - Fix a 64-bit division - vf migration fix - LRC pause fix" * tag 'drm-next-2025-12-05' of https://gitlab.freedesktop.org/drm/kernel: (25 commits) drm/i915/color: Enable Plane Color Pipelines drm/i915/color: Add 3D LUT to color pipeline drm/i915/color: Add registers for 3D LUT drm/i915/color: Program Plane Post CSC Registers drm/i915/color: Program Pre-CSC registers drm/i915/color: Add framework to program PRE/POST CSC LUT drm/i915: Add register definitions for Plane Post CSC drm/i915: Add register definitions for Plane Degamma drm/i915/color: Add plane CTM callback for D12 and beyond drm/i915/color: Preserve sign bit when int_bits is Zero drm/i915/color: Add framework to program CSC drm/i915/color: Create a transfer function color pipeline drm/i915/color: Add helper to create intel colorop drm/i915: Add intel_color_op drm/i915/display: Add identifiers for driver specific blocks drm/xe/pf: fix VFIO link error drm/xe: Protect against unset LRC when pausing submissions drm/xe/vf: Start re-emission from first unsignaled job during VF migration drm/xe/pf: Use div_u64 when calculating GGTT profile drm/xe: Fix memory leak when handling pagefault vma ... |
||
|
Linus Torvalds
|
028bd4a146 |
Merge tag 'tpmdd-next-6.19-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen: "This contains changes to unify TPM return code translation between trusted_tpm2 and TPM driver itself. Other than that the changes are either bug fixes or minor imrovements" * tag 'tpmdd-next-6.19-rc1-v4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: KEYS: trusted: Use tpm_ret_to_err() in trusted_tpm2 tpm: Use -EPERM as fallback error code in tpm_ret_to_err tpm: Cap the number of PCR banks tpm: Remove tpm_find_get_ops tpm: add WQ_PERCPU to alloc_workqueue users tpm_crb: add missing loc parameter to kerneldoc tpm_crb: Fix a spelling mistake selftests: tpm2: Fix ill defined assertions |
||
|
Linus Torvalds
|
16460bf96c |
Merge tag 'ata-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Niklas Cassel:
- Add DT binding for the Eswin EIC7700 SoC SATA Controller (Yulin Lu)
- Allow 'iommus' property in the Synopsys DWC AHCI SATA controller DT
binding (Rob Herring)
- Replace deprecated strcpy with strscpy in the pata_it821x driver
(Thorsten Blum)
- Add Iomega Clik! PCMCIA ATA/ATAPI Adapter PCMCIA ID to the
pata_pcmcia driver (René Rebe)
- Add ATA_QUIRK_NOLPM quirk for two Silicon Motion SSDs with broken LPM
support (me)
- Add flag WQ_PERCPU to the workqueue in the libata-sff helper library
to explicitly request the use of the per-CPU behavior (Marco
Crivellari)
* tag 'ata-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-core: Disable LPM on Silicon Motion MD619{H,G}XCLDE3TC
ata: pata_pcmcia: Add Iomega Clik! PCMCIA ATA/ATAPI Adapter
ata: libata-sff: add WQ_PERCPU to alloc_workqueue users
dt-bindings: ata: snps,dwc-ahci: Allow 'iommus' property
ata: pata_it821x: Replace deprecated strcpy with strscpy in it821x_display_disk
dt-bindings: ata: eswin: Document for EIC7700 SoC ahci
|
||
|
Linus Torvalds
|
bc69ed9752 |
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin: "Just a bunch of fixes and cleanups, mostly very simple. Several features were merged through net-next this time around" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_pci: drop kernel.h vhost: switch to arrays of feature bits vhost/test: add test specific macro for features virtio: clean up features qword/dword terms vduse: add WQ_PERCPU to alloc_workqueue users virtio_balloon: add WQ_PERCPU to alloc_workqueue users vdpa/pds: use %pe for ERR_PTR() in event handler registration vhost: Fix kthread worker cgroup failure handling virtio: vdpa: Fix reference count leak in octep_sriov_enable() vdpa/mlx5: Fix incorrect error code reporting in query_virtqueues virtio: fix map ops comment virtio: fix virtqueue_set_affinity() docs virtio: standardize Returns documentation style virtio: fix grammar in virtio_map_ops docs virtio: fix grammar in virtio_queue_info docs virtio: fix whitespace in virtio_config_ops virtio: fix typo in virtio_device_ready() comment virtio: fix kernel-doc for mapping/free_coherent functions virtio_vdpa: fix misleading return in void function |
||
|
Linus Torvalds
|
55aa394a5e |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"This has another new RDMA driver 'bng_en' for latest generation
Broadcom NICs. There might be one more new driver still to come.
Otherwise it is a fairly quite cycle. Summary:
- Minor driver bug fixes and updates to cxgb4, rxe, rdmavt, bnxt_re,
mlx5
- Many bug fix patches for irdma
- WQ_PERCPU annotations and system_dfl_wq changes
- Improved mlx5 support for "other eswitches" and multiple PFs
- 1600Gbps link speed reporting support. Four Digits Now!
- New driver bng_en for latest generation Broadcom NICs
- Bonding support for hns
- Adjust mlx5's hmm based ODP to work with the very large address
space created by the new 5 level paging default on x86
- Lockdep fixups in rxe and siw"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (65 commits)
RDMA/rxe: reclassify sockets in order to avoid false positives from lockdep
RDMA/siw: reclassify sockets in order to avoid false positives from lockdep
RDMA/bng_re: Remove prefetch instruction
RDMA/core: Reduce cond_resched() frequency in __ib_umem_release
RDMA/irdma: Fix SRQ shadow area address initialization
RDMA/irdma: Remove doorbell elision logic
RDMA/irdma: Do not set IBK_LOCAL_DMA_LKEY for GEN3+
RDMA/irdma: Do not directly rely on IB_PD_UNSAFE_GLOBAL_RKEY
RDMA/irdma: Add missing mutex destroy
RDMA/irdma: Fix SIGBUS in AEQ destroy
RDMA/irdma: Add a missing kfree of struct irdma_pci_f for GEN2
RDMA/irdma: Fix data race in irdma_free_pble
RDMA/irdma: Fix data race in irdma_sc_ccq_arm
RDMA/mlx5: Add support for 1600_8x lane speed
RDMA/core: Add new IB rate for XDR (8x) support
IB/mlx5: Reduce IMR KSM size when 5-level paging is enabled
RDMA/bnxt_re: Pass correct flag for dma mr creation
RDMA/bnxt_re: Fix the inline size for GenP7 devices
RDMA/hns: Support reset recovery for bond
RDMA/hns: Support link state reporting for bond
...
|
||
|
Linus Torvalds
|
056daec292 |
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"This is a pretty consequential cycle for iommufd, though this pull is
not too big. It is based on a shared branch with VFIO that introduces
VFIO_DEVICE_FEATURE_DMA_BUF a DMABUF exporter for VFIO device's MMIO
PCI BARs. This was a large multiple series journey over the last year
and a half.
Based on that work IOMMUFD gains support for VFIO DMABUF's in its
existing IOMMU_IOAS_MAP_FILE, which closes the last major gap to
support PCI peer to peer transfers within VMs.
In Joerg's iommu tree we have the "generic page table" work which aims
to consolidate all the duplicated page table code in every iommu
driver into a single algorithm. This will be used by iommufd to
implement unique page table operations to start adding new features
and improve performance.
In here:
- Expand IOMMU_IOAS_MAP_FILE to accept a DMABUF exported from VFIO.
This is the first step to broader DMABUF support in iommufd, right
now it only works with VFIO. This closes the last functional gap
with classic VFIO type 1 to safely support PCI peer to peer DMA by
mapping the VFIO device's MMIO into the IOMMU.
- Relax SMMUv3 restrictions on nesting domains to better support
qemu's sequence to have an identity mapping before the vSID is
established"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommu/arm-smmu-v3-iommufd: Allow attaching nested domain for GBPA cases
iommufd/selftest: Add some tests for the dmabuf flow
iommufd: Accept a DMABUF through IOMMU_IOAS_MAP_FILE
iommufd: Have iopt_map_file_pages convert the fd to a file
iommufd: Have pfn_reader process DMABUF iopt_pages
iommufd: Allow MMIO pages in a batch
iommufd: Allow a DMABUF to be revoked
iommufd: Do not map/unmap revoked DMABUFs
iommufd: Add DMABUF to iopt_pages
vfio/pci: Add vfio_pci_dma_buf_iommufd_map()
|
||
|
Linus Torvalds
|
a3ebb59eee |
Merge tag 'vfio-v6.19-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson: - Move libvfio selftest artifacts in preparation of more tightly coupled integration with KVM selftests (David Matlack) - Fix comment typo in mtty driver (Chu Guangqing) - Support for new hardware revision in the hisi_acc vfio-pci variant driver where the migration registers can now be accessed via the PF. When enabled for this support, the full BAR can be exposed to the user (Longfang Liu) - Fix vfio cdev support for VF token passing, using the correct size for the kernel structure, thereby actually allowing userspace to provide a non-zero UUID token. Also set the match token callback for the hisi_acc, fixing VF token support for this this vfio-pci variant driver (Raghavendra Rao Ananta) - Introduce internal callbacks on vfio devices to simplify and consolidate duplicate code for generating VFIO_DEVICE_GET_REGION_INFO data, removing various ioctl intercepts with a more structured solution (Jason Gunthorpe) - Introduce dma-buf support for vfio-pci devices, allowing MMIO regions to be exposed through dma-buf objects with lifecycle managed through move operations. This enables low-level interactions such as a vfio-pci based SPDK drivers interacting directly with dma-buf capable RDMA devices to enable peer-to-peer operations. IOMMUFD is also now able to build upon this support to fill a long standing feature gap versus the legacy vfio type1 IOMMU backend with an implementation of P2P support for VM use cases that better manages the lifecycle of the P2P mapping (Leon Romanovsky, Jason Gunthorpe, Vivek Kasireddy) - Convert eventfd triggering for error and request signals to use RCU mechanisms in order to avoid a 3-way lockdep reported deadlock issue (Alex Williamson) - Fix a 32-bit overflow introduced via dma-buf support manifesting with large DMA buffers (Alex Mastro) - Convert nvgrace-gpu vfio-pci variant driver to insert mappings on fault rather than at mmap time. This conversion serves both to make use of huge PFNMAPs but also to both avoid corrected RAS events during reset by now being subject to vfio-pci-core's use of unmap_mapping_range(), and to enable a device readiness test after reset (Ankit Agrawal) - Refactoring of vfio selftests to support multi-device tests and split code to provide better separation between IOMMU and device objects. This work also enables a new test suite addition to measure parallel device initialization latency (David Matlack) * tag 'vfio-v6.19-rc1' of https://github.com/awilliam/linux-vfio: (65 commits) vfio: selftests: Add vfio_pci_device_init_perf_test vfio: selftests: Eliminate INVALID_IOVA vfio: selftests: Split libvfio.h into separate header files vfio: selftests: Move vfio_selftests_*() helpers into libvfio.c vfio: selftests: Rename vfio_util.h to libvfio.h vfio: selftests: Stop passing device for IOMMU operations vfio: selftests: Move IOVA allocator into iova_allocator.c vfio: selftests: Move IOMMU library code into iommu.c vfio: selftests: Rename struct vfio_dma_region to dma_region vfio: selftests: Upgrade driver logging to dev_err() vfio: selftests: Prefix logs with device BDF where relevant vfio: selftests: Eliminate overly chatty logging vfio: selftests: Support multiple devices in the same container/iommufd vfio: selftests: Introduce struct iommu vfio: selftests: Rename struct vfio_iommu_mode to iommu_mode vfio: selftests: Allow passing multiple BDFs on the command line vfio: selftests: Split run.sh into separate scripts vfio: selftests: Move run.sh into scripts directory vfio/nvgrace-gpu: wait for the GPU mem to be ready vfio/nvgrace-gpu: Inform devmem unmapped after reset ... |
||
|
Dan Williams
|
7dfbe9a675 |
crypto/ccp: Fix CONFIG_PCI=n build
It turns out that the PCI driver for ccp is unconditionally built into the kernel in the CONFIG_PCI=y case. This means that the new SEV-TIO support needs an explicit dependency on PCI to avoid build errors when CONFIG_CRYPTO_DEV_SP_PSP=y and CONFIG_PCI=n. Reported-by: kernel test robot <lkp@intel.com> Closes: http://lore.kernel.org/202512030743.6pVPA4sx-lkp@intel.com Cc: Alexey Kardashevskiy <aik@amd.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: John Allen <john.allen@amd.com> Acked-by: Alexey Kardashevskiy <aik@amd.com> Link: https://patch.msgid.link/20251203031948.2471431-1-dan.j.williams@intel.com Signed-off-by: Dan Williams <dan.j.williams@intel.com> |
||
|
Linus Torvalds
|
ce5cfb0fa2 |
Merge tag 'iommu-updates-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu updates from Joerg Roedel:
- Introduction of the generic IO page-table framework with support for
Intel and AMD IOMMU formats from Jason.
This has good potential for unifying more IO page-table
implementations and making future enhancements more easy. But this
also needed quite some fixes during development. All known issues
have been fixed, but my feeling is that there is a higher potential
than usual that more might be needed.
- Intel VT-d updates:
- Use right invalidation hint in qi_desc_iotlb()
- Reduce the scope of INTEL_IOMMU_FLOPPY_WA
- ARM-SMMU updates:
- Qualcomm device-tree binding updates for Kaanapali and Glymur SoCs
and a new clock for the TBU.
- Fix error handling if level 1 CD table allocation fails.
- Permit more than the architectural maximum number of SMRs for
funky Qualcomm mis-implementations of SMMUv2.
- Mediatek driver:
- MT8189 iommu support
- Move ARM IO-pgtable selftests to kunit
- Device leak fixes for a couple of drivers
- Random smaller fixes and improvements
* tag 'iommu-updates-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux: (81 commits)
iommupt/vtd: Support mgaw's less than a 4 level walk for first stage
iommupt/vtd: Allow VT-d to have a larger table top than the vasz requires
powerpc/pseries/svm: Make mem_encrypt.h self contained
genpt: Make GENERIC_PT invisible
iommupt: Avoid a compiler bug with sw_bit
iommu/arm-smmu-qcom: Enable use of all SMR groups when running bare-metal
iommupt: Fix unlikely flows in increase_top()
iommu/amd: Propagate the error code returned by __modify_irte_ga() in modify_irte_ga()
MAINTAINERS: Update my email address
iommu/arm-smmu-v3: Fix error check in arm_smmu_alloc_cd_tables
dt-bindings: iommu: qcom_iommu: Allow 'tbu' clock
iommu/vt-d: Restore previous domain::aperture_end calculation
iommu/vt-d: Fix unused invalidation hint in qi_desc_iotlb
iommu/vt-d: Set INTEL_IOMMU_FLOPPY_WA depend on BLK_DEV_FD
iommu/tegra: fix device leak on probe_device()
iommu/sun50i: fix device leak on of_xlate()
iommu/omap: simplify probe_device() error handling
iommu/omap: fix device leaks on probe_device()
iommu/mediatek-v1: add missing larb count sanity check
iommu/mediatek-v1: fix device leaks on probe()
...
|
||
|
Linus Torvalds
|
5797d10ea4 |
Merge tag 'cxl-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull compute express link (CXL) updates from Dave Jiang:
"The additions of note are adding CXL region remove support for locked
CXL decoders, adding unit testing support for XOR address translation,
and adding unit testing support for extended linear cache.
Misc:
- Remove incorrect page-allocator quirk section in documentation
- Remove unused devm_cxl_port_enumerate_dports() function
- Fix typo in cdat.c code comment
- Replace use of system_wq with system_percpu_wq
- Add locked CXL decoder support for region removal
- Return when generic target updated
- Rename region_res_match_cxl_range() to spa_maps_hpa()
- Clarify comment in spa_maps_hpa()
Enable unit testing for XOR address translation of SPA to DPA and vice versa:
- Refactor address translation funcs for testing in cxl_region
- Make the XOR calculations available for testing
- Add cxl_translate module for address translation testing in
cxl_test
Extended Linear Cache changes:
- Add extended linear cache size sysfs attribute
- Adjust failure emission of extended linear cache detection in
cxl_acpi
- Added extended linear cache unit testing support in cxl_test
Preparation refactor patches for PRM translation support:
- Simplify cxl_rd_ops allocation and handling
- Group xor arithmetric setup code in a single block
- Remove local variable @inc in cxl_port_setup_targets()"
* tag 'cxl-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (22 commits)
cxl/test: Assign overflow_err_count from log->nr_overflow
cxl/test: Remove ret_limit race condition in mock_get_event()
cxl/test: remove unused mock function for cxl_rcd_component_reg_phys()
cxl/test: Add support for acpi extended linear cache
cxl/test: Add cxl_test CFMWS support for extended linear cache
cxl/test: Standardize CXL auto region size
cxl/region: Remove local variable @inc in cxl_port_setup_targets()
cxl/acpi: Group xor arithmetric setup code in a single block
cxl: Simplify cxl_rd_ops allocation and handling
cxl: Clarify comment in spa_maps_hpa()
cxl: Rename region_res_match_cxl_range() to spa_maps_hpa()
acpi/hmat: Return when generic target is updated
cxl: Add handling of locked CXL decoder
cxl/region: Add support to indicate region has extended linear cache
cxl: Adjust extended linear cache failure emission in cxl_acpi
cxl/test: Add cxl_translate module for address translation testing
cxl/acpi: Make the XOR calculations available for testing
cxl/region: Refactor address translation funcs for testing
cxl/pci: replace use of system_wq with system_percpu_wq
cxl: fix typos in cdat.c comments
...
|
||
|
Nathan Chancellor
|
311607017e |
virt: Fix Kconfig warning when selecting TSM without VIRT_DRIVERS
After commit |
||
|
Linus Torvalds
|
43dfc13ca9 |
Merge tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Enable host bridge emulation for PCI_DOMAINS_GENERIC platforms (Dan
Williams)
- Switch vmd from custom domain number allocator to the common
allocator to prevent a potential race with new non-VMD buses (Dan
Williams)
- Enable Precision Time Measurement (PTM) only if device advertises
support for a relevant role, to prevent invalid PTM Requests that
cause ACS violations that are reported as AER Uncorrectable
Non-Fatal errors (Mika Westerberg)
Resource management:
- Prevent resource tree corruption when BAR resize fails (Ilpo
Järvinen)
- Restore BARs to the original size if a BAR resize fails (Ilpo
Järvinen)
- Remove BAR release from BAR resize attempts by the xe, i915, and
amdgpu drivers so the PCI core can restore BARs if the resize fails
(Ilpo Järvinen)
- Move Resizable BAR code to rebar.c (Ilpo Järvinen)
- Add pci_rebar_size_supported() and use it in i915 and xe (Ilpo
Järvinen)
- Add pci_rebar_get_max_size() and use it in xe and amdgpu (Ilpo
Järvinen)
Power management and error handling:
- For drivers using PCI legacy suspend, save config state at suspend
so that state (not any earlier state from enumeration, probe, or
error recovery) will be restored when resuming (Lukas Wunner)
- For devices with no driver or a driver that lacks power management,
save config state at hibernate so that state (not any earlier state
from enumeration, probe, or error recovery) will be restored when
resuming (Lukas Wunner)
- Save device config space on device addition, before driver binding,
so error recovery works more reliably (Lukas Wunner)
- Drop pci_save_state() from several drivers that no longer need it
since the PCI core always does it and pci_restore_state() no longer
invalidates the saved state (Lukas Wunner)
- Document use of pci_save_state() by drivers to capture the state
they want restored during error recovery (Lukas Wunner)
Power control:
- Add a struct pci_ops.assert_perst() function pointer to
assert/deassert PCIe PERST# and implement it for the qcom driver
(Krishna Chaitanya Chundru)
- Add DT binding and pwrctrl driver for the Toshiba TC9563 PCIe
switch, which must be held in reset after poweron so the pwrctrl
driver can configure the switch via I2C before bringing up the
links (Krishna Chaitanya Chundru)
Endpoint framework:
- Convert the endpoint doorbell test to use a threaded IRQ to fix a
'sleeping while atomic' issue (Bhanu Seshu Kumar Valluri)
- Add endpoint VNTB MSI doorbell support to reduce latency between
host and endpoint (Frank Li)
New native PCIe controller drivers:
- Add CIX Sky1 host controller DT binding and driver (Hans Zhang)
- Add NXP S32G host controller DT binding and driver (Vincent
Guittot)
- Add Renesas RZ/G3S host controller DT binding and driver (Claudiu
Beznea)
- Add SpacemiT K1 host controller DT binding and driver (Alex Elder)
Amlogic Meson PCIe controller driver:
- Update DT binding to name DBI region 'dbi', not 'elbi', and update
driver to support both (Manivannan Sadhasivam)
Apple PCIe controller driver:
- Move struct pci_host_bridge allocation from pci_host_common_init()
to callers, which significantly simplifies pcie-apple (Marc
Zyngier)
Broadcom STB PCIe controller driver:
- Disable advertising ASPM L0s support correctly (Jim Quinlan)
- Add a panic/die handler to print diagnostic info in case PCIe
caused an unrecoverable abort (Jim Quinlan)
Cadence PCIe controller driver:
- Add module support for Cadence platform host and endpoint
controller driver (Manikandan K Pillai)
- Split headers into 'legacy' (LGA) and 'high perf' (HPA) to prepare
for new CIX Sky1 driver (Manikandan K Pillai)
MediaTek PCIe controller driver:
- Convert DT binding to YAML schema (Christian Marangi)
- Add Airoha AN7583 DT compatible and driver support (Christian
Marangi)
Qualcomm PCIe controller driver:
- Add Qualcomm Kaanapali to SM8550 DT binding (Qiang Yu)
- Add required 'power-domains' and 'resets' to qcom sa8775p, sc7280,
sc8280xp, sm8150, sm8250, sm8350, sm8450, sm8550, x1e80100 DT
schemas (Krzysztof Kozlowski)
- Look up OPP using both frequency and data rate (not just frequency)
so RPMh votes can account for both (Krishna Chaitanya Chundru)
Rockchip DesignWare PCIe controller driver:
- Add Rockchip RK3528 compatible strings in DT binding (Yao Zi)
STMicroelectronics STM32MP25 PCIe controller driver:
- Fix a race between link training and endpoint register
initialization (Christian Bruel)
- Align endpoint allocations to match the ATU requirements (Christian
Bruel)
Synopsys DesignWare PCIe controller driver:
- Clear L1 PM Substate Capability 'Supported' bits unless glue driver
says it's supported, which prevents users from enabling non-working
L1SS. Currently only qcom and tegra194 support L1SS (Bjorn Helgaas)
- Remove now-superfluous L1SS disable code from tegra194 (Bjorn
Helgaas)
- Configure L1SS support in dw-rockchip when DT says
'supports-clkreq' (Shawn Lin)
TI Keystone PCIe controller driver:
- Fail the probe instead of silently succeeding if ks_pcie_of_data
didn't specify Root Complex or Endpoint mode (Siddharth Vadapalli)
- Make keystone buildable as a loadable module, except on ARM32 where
hook_fault_code() is __init (Siddharth Vadapalli)"
* tag 'pci-v6.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (100 commits)
MAINTAINERS: Add Manivannan Sadhasivam as PCI/pwrctrl maintainer
MAINTAINERS: Add CIX Sky1 PCIe controller driver maintainer
PCI: sky1: Add PCIe host support for CIX Sky1
dt-bindings: PCI: Add CIX Sky1 PCIe Root Complex bindings
PCI: cadence: Add support for High Perf Architecture (HPA) controller
MAINTAINERS: Add NXP S32G PCIe controller driver maintainer
PCI: s32g: Add NXP S32G PCIe controller driver (RC)
PCI: dwc: Add register and bitfield definitions
dt-bindings: PCI: s32g: Add NXP S32G PCIe controller
PCI: Add Renesas RZ/G3S host controller driver
PCI: host-generic: Move bridge allocation outside of pci_host_common_init()
dt-bindings: PCI: Add Renesas RZ/G3S PCIe controller binding
PCI: Validate pci_rebar_size_supported() input
Documentation: PCI: Amend error recovery doc with pci_save_state() rules
treewide: Drop pci_save_state() after pci_restore_state()
PCI/ERR: Ensure error recoverability at all times
PCI/PM: Stop needlessly clearing state_saved on enumeration and thaw
PCI/PM: Reinstate clearing state_saved in legacy and !PM codepaths
PCI: dw-rockchip: Configure L1SS support
PCI: tegra194: Remove unnecessary L1SS disable code
...
|
||
|
Linus Torvalds
|
b1dd1e2f3e |
Merge tag 'efi-next-for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"The usual trickle of EFI contributions:
- Parse SMBIOS tables in memory directly on Macbooks that do not
implement the EFI SMBIOS protocol
- Obtain EDID information from the primary display while running in
the EFI stub, and expose it via bootparams on x86 (generic method
is in the works, and will likely land during the next cycle)
- Bring CPER handling for ARM systems up to data with the latest EFI
spec changes
- Various cosmetic changes"
* tag 'efi-next-for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
docs: efi: add CPER functions to driver-api
efi/cper: align ARM CPER type with UEFI 2.9A/2.10 specs
efi/cper: Add a new helper function to print bitmasks
efi/cper: Adjust infopfx size to accept an extra space
RAS: Report all ARM processor CPER information to userspace
efi/libstub: x86: Store EDID in boot_params
efi/libstub: gop: Add support for reading EDID
efi/libstub: gop: Initialize screen_info in helper function
efi/libstub: gop: Find GOP handle instead of GOP data
efi: Fix trailing whitespace in header file
efi/memattr: Convert efi_memattr_init() return type to void
efi: stmm: fix kernel-doc "bad line" warnings
efi/riscv: Remove the useless failure return message print
efistub/x86: Add fallback for SMBIOS record lookup
|
||
|
Dave Airlie
|
c7685d1110 |
Merge tag 'topic/drm-intel-plane-color-pipeline-2025-12-04' of https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
drm/i915 topic pull request for v6.19: Features and functionality: - Add plane color management support (Uma, Chaitanya) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patch.msgid.link/e7129c6afd6208719d2f5124da86e810505e7a7b@intel.com |
||
|
Dave Airlie
|
86fafc584c |
Merge tag 'drm-xe-next-fixes-2025-12-04' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes: - Fix a memory leak (Mika) - Fix a 64-bit division (Michal Wajdeczko) - vf migration fix (Matt Brost) - LRC pause Fix (Tomasz lis) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patch.msgid.link/aTIGiHJnnMtqbDOO@fedora |
||
|
Dave Airlie
|
e73c226204 |
Merge tag 'topic/xe-vfio-2025-12-04' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes: - fix VFIO link error for built-in xe module (Arnd Bergmann) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patch.msgid.link/aTIA9in2Bo_fA9TN@fedora |
||
|
Dave Airlie
|
55a271a0f7 |
Merge tag 'topic/xe-vfio-2025-12-01' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Cross-subsystem Changes: - Add device specific vfio_pci driver variant for intel graphics (Michal Winiarski) Driver Changes: - Add scope-based cleanup helper for runtime PM (Matt Roper) - Additional xe driver prerequisites and exports (Michal Winiarski) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://patch.msgid.link/aS1bNpqeem6PIHrA@fedora |
||
|
Linus Torvalds
|
b0206c4eb6 |
Merge tag 'for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel: "Power-supply core: - documentation fixes power-supply drivers: - add BD71828 charger driver - add Richtek RT9756 driver - max77705: add adaptive input current support - max77705: add support for multiple devices - misc small fixes reset drivers: - add spacemit-p1 poweroff/reboot driver" * tag 'for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: Revert "power: supply: qcom_battmgr: support disabling charge control" Documentation: power: rt9756: Document exported sysfs entries power: supply: rt9756: Add Richtek RT9756 smart cap divider charger dt-bindings: power: supply: Add Richtek RT9756 smart cap divider charger driver: reset: spacemit-p1: add driver for poweroff/reboot power: supply: apm_power: only unset own apm_get_power_status power: supply: use ktime_divns() to avoid 64-bit division docs: power: clean up power_supply_class.rst power: supply: qcom_battmgr: support disabling charge control power: supply: qcom_battmgr: clamp charge control thresholds power: supply: wm831x: Check wm831x_set_bits() return value power: supply: rt9467: Prevent using uninitialized local variable in rt9467_set_value_from_ranges() power: supply: rt9467: Return error on failure in rt9467_set_value_from_ranges() power: supply: max17040: Check iio_read_channel_processed() return code power: supply: cw2015: Check devm_delayed_work_autocancel() return code power: supply: rt5033_charger: Fix device node reference leaks power: supply: max77705: Fix potential IRQ chip conflict when probing two devices power: supply: max77705_charger: implement aicl feature MAINTAINERS: Add entry for BD71828 charger power: supply: Add bd718(15/28/78) charger driver |
||
|
Linus Torvalds
|
6044a1ee9d |
Merge tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma,
brcm,sr-thermal, amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions
Owl SPS, Marvell AP80x System Controller, Marvell CP110 System
Controller, cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema
format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform
compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data()
helpers and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the
code to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e.
in a parent node) on nodes without an interrupt. This matches the
spec description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI"
* tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: kbuild: Skip validating empty examples
dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement
dt-bindings: display: Fix brcm,bcm2835-hvs bindings for BCM2712
dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712
of: Skip devicetree kunit tests when RISCV+ACPI doesn't populate root node
soc: tegra: Simplify with of_machine_device_match()
soc: qcom: ubwc: Simplify with of_machine_get_match_data()
powercap: dtpm: Simplify with of_machine_get_match_data()
platform: surface: Simplify with of_machine_get_match_data()
irqchip/atmel-aic: Simplify with of_machine_get_match_data()
firmware: qcom: scm: Simplify with of_machine_device_match()
cpuidle: big_little: Simplify with of_machine_device_match()
cpufreq: sun50i: Simplify with of_machine_device_match()
cpufreq: mediatek: Simplify with of_machine_get_match_data()
cpufreq: dt-platdev: Simplify with of_machine_get_match_data()
of: Add wrappers to match root node with OF device ID tables
dt-bindings: eeprom: at25: Add Anvo ANV32C81W
of/reserved_mem: Simplify the logic of __reserved_mem_alloc_size()
of/reserved_mem: Simplify the logic of fdt_scan_reserved_mem_reg_nodes()
of/reserved_mem: Simplify the logic of __reserved_mem_reserve_reg()
...
|
||
|
Linus Torvalds
|
fde4ce068d |
Merge tag 'hid-for-linus-2025120201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina: - Proper mapping of HID_GD_Z to ABS_DISTANCE for stylus/pen types of devices (Ping Cheng) - Power management/hibernation improvements in intel-ish (Zhang Lixu) - Improved support for several Logitech devices, e.g. G Pro X Superlight 2, new iteration of Lighspeed receiver, G13, G510 (Nathan Rossi, Mavroudis Chatzilazaridis, Leo L Schwab, Hans de Goede) - Support for UcLogic XP-PEN Artist 24 Pro (Joshua Goins) - WinWing Orion2 throttle support improvement (Ivan Gorinov) - other assorted small fixes and device ID additions * tag 'hid-for-linus-2025120201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (37 commits) drivers: hid: renegotiate resolution multipliers with device after reset HID: evision: Fix Report Descriptor for Evision Wireless Receiver 320f:226f HID: logitech-dj: Fix probe failure when used with KVM HID: logitech-dj: Remove duplicate error logging HID: logitech-dj: Add support for G Pro X Superlight 2 receiver selftests/hid-tablet: add ABS_DISTANCE test for stylus/pen HID: input: map HID_GD_Z to ABS_DISTANCE for stylus/pen HID: bpf: fix typo in HID usage table HID: bpf: add the Huion Kamvas 27 Pro HID: bpf: add heuristics to the Huion Inspiroy 2S eraser button HID: bpf: Add support for XP-Pen Deco02 HID: bpf: Add support for the XP-Pen Deco 01 V3 HID: bpf: Add support for the Waltop Batteryless Tablet HID: bpf: Add fixup for Logitech SpaceNavigator variants HID: bpf: support for Huion Kamvas 16 Gen 3 HID: bpf: add support for Huion Kamvas 13 (Gen 3) (model GS1333) HID: bpf: Add support for the Inspiroy 2M Documentation: hid-alps: Format DataByte* subsection headings Documentation: hid-alps: Fix packet format section headings HID: nintendo: add WQ_PERCPU to alloc_workqueue users ... |
||
|
Ian Rogers
|
d509d14fff |
perf stat: Improve handling of termination by signal
When interrupting perf stat in repeat mode with a signal the signal is passed to the child process but the repeat doesn't terminate: ``` $ perf stat -v --null --repeat 10 sleep 1 Control descriptor is not initialized [ perf stat: executing run #1 ... ] [ perf stat: executing run #2 ... ] ^Csleep: Interrupt [ perf stat: executing run #3 ... ] [ perf stat: executing run #4 ... ] [ perf stat: executing run #5 ... ] [ perf stat: executing run #6 ... ] [ perf stat: executing run #7 ... ] [ perf stat: executing run #8 ... ] [ perf stat: executing run #9 ... ] [ perf stat: executing run #10 ... ] Performance counter stats for 'sleep 1' (10 runs): 0.9500 +- 0.0512 seconds time elapsed ( +- 5.39% ) 0.01user 0.02system 0:09.53elapsed 0%CPU (0avgtext+0avgdata 18940maxresident)k 29944inputs+0outputs (0major+2629minor)pagefaults 0swaps ``` Terminate the repeated run and give a reasonable exit value: ``` $ perf stat -v --null --repeat 10 sleep 1 Control descriptor is not initialized [ perf stat: executing run #1 ... ] [ perf stat: executing run #2 ... ] [ perf stat: executing run #3 ... ] ^Csleep: Interrupt Performance counter stats for 'sleep 1' (10 runs): 0.680 +- 0.321 seconds time elapsed ( +- 47.16% ) Command exited with non-zero status 130 0.00user 0.01system 0:02.05elapsed 0%CPU (0avgtext+0avgdata 70688maxresident)k 0inputs+0outputs (0major+5002minor)pagefaults 0swaps ``` Note, this also changes the exit value for non-repeat runs when interrupted by a signal. Reported-by: Ingo Molnar <mingo@kernel.org> Closes: https://lore.kernel.org/lkml/aS5wjmbAM9ka3M2g@gmail.com/ Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> |
||
|
Ian Rogers
|
5123509628 |
perf tests stat: Add test for error for an offline CPU
Add a test that if an offline CPU is requested perf stat will fail. $ perf test -vv "perf stat tests" 101: perf stat tests: --- start --- test child forked, pid 46965 Basic stat command test Basic stat command test [Success] Null stat command test Null stat command test [Success] Offline CPU stat command test (cpu 8) Offline CPU stat command test [Success] stat record and report test stat record and report test [Success] stat record and script test stat record and script test [Success] stat repeat weak groups test stat repeat weak groups test [Success] Topdown event group test Topdown event group test [Success] Topdown weak groups test Topdown weak groups test [Skipped event parsing failed] cputype test cputype test [Success] hybrid test hybrid test [Success] ---- end(0) ---- 101: perf stat tests : Ok Reported-by: Thomas Richter <tmricht@linux.ibm.com> Closes: https://lore.kernel.org/linux-perf-users/94313b82-888b-4f42-9fb0-4585f9e90080@linux.ibm.com/ Signed-off-by: Ian Rogers <irogers@google.com> Signed-off-by: Namhyung Kim <namhyung@kernel.org> |
||
|
Linus Torvalds
|
d1b46f53a5 |
Merge tag 'backlight-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"Additions:
- Add support for Awinic AW99706 backlight driver
Fixes:
- Add GPIOLIB dependency to backlight ktd2801 driver
- Add devlink to LED Backlight's supplier LEDs to enforce correct
removal order and prevent NULL pointer dereferences
- Fix kernel-doc warnings in lp855x.h
Removals:
- Do not include <linux/fb.h> in backlight.h
- Fix unused function warnings from suspend/resume ops in aw99706.c
by switching to DEFINE_SIMPLE_DEV_PM_OPS and using pm_ptr()
Bindings:
- Add Awinic AW99706 backlight binding to MAINTAINERS
- Add Awinic AW99706 backlight binding documentation"
* tag 'backlight-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: aw99706: Fix unused function warnings from suspend/resume ops
backlight: lp855x: Fix lp855x.h kernel-doc warnings
dt-bindings: leds: backlight: Add Awinic AW99706 backlight
backlight: aw99706: Add support for Awinic AW99706 backlight
backlight: led-bl: Add devlink to supplier LEDs
backlight: ktd2801: Depend on GPIOLIB
backlight: Do not include <linux/fb.h> in header file
|
||
|
Linus Torvalds
|
7b8653a579 |
Merge tag 'leds-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Updates:
- Add optional GPIO enable pin support to PWM LED driver
Fixes:
- Allow LED module 0 to be added to module bank in lp50xx driver
- Fix upboard LED driver module alias to ensure proper auto-loading
- Update LP5009 to support 3 modules for a total of 9 LEDs
- Skip LEDs without color components in cros_ec driver instead of
failing probe
- Fix GPIO descriptor leaks in netxbig error paths by releasing
acquired GPIOs
- Allow LED_COLOR_ID_MULTI in qcom-lpg driver for greater flexibility
- Enable LP55XX common LED use without FW_LOADER_USER_HELPER
- Ensure lp50xx chip is enabled before any I2C communication
Cleanups:
- Use fwnode_for_each_child_node() instead of
fwnode_for_each_available_child_node() in LED drivers
- Use device_get_next_child_node() instead of
fwnode_get_next_available_child_node() in LED flash drivers
- Replace sprintf() with sysfs_emit() in sysfs show functions for
improved bounds checking
- Replace system_wq() with system_percpu_wq() in the input event
trigger
- Reorder include files to alphabetic order in the PWM LED driver
- Do not enable TRILED in qcom-lpg when configuring PWM
- Drop duplicate LEDS_EXPRESSWIRE config from Kconfig
Removals:
- Remove arcxcnn_bl.txt Device Tree binding documentation
Devicetree bindings:
- Convert ArcticSand arc2c0608 LED driver binding to DT Schema
- Add default-brightness property to common LED binding
- Add enable-gpios property to PWM LED binding
- Add PM7550 to qcom,spmi-flash-led compatible
- Explain standalone PWM usage in qcom-lpg binding"
* tag 'leds-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (21 commits)
leds: rgb: leds-qcom-lpg: Don't enable TRILED when configuring PWM
dt-bindings: leds: qcom-lpg: Explain standalone PWM usage
leds: rgb: leds-qcom-lpg: Allow LED_COLOR_ID_MULTI
leds: pwm: Reorder include files to alphabetic order
leds: pwm: Add optional GPIO enable pin support
dt-bindings: leds: pwm: Add enable-gpios property
leds: trigger: Replace use of system_wq() with system_percpu_wq()
leds: led-class: Replace sprintf() with sysfs_emit() in sysfs show functions
dt-bindings: leds: qcom,spmi-flash-led: Add PM7550
leds: netxbig: Fix GPIO descriptor leak in error paths
leds: leds-lp50xx: Enable chip before any communication
leds: Drop duplicate LEDS_EXPRESSWIRE config
leds: leds-cros_ec: Skip LEDs without color components
leds: leds-lp50xx: LP5009 supports 3 modules for a total of 9 LEDs
leds: upboard: Fix module alias
leds: leds-lp50xx: Allow LED 0 to be added to module bank
leds: lp55xx_common: Enable use without FW_LOADER_USER_HELPER
dt-bindings: leds: Add default-brightness property to common.yaml
leds: flash: Use fwnode_get_next_child_node() instead
leds: Use fwnode_for_each_child_node() instead
...
|
||
|
Linus Torvalds
|
980190a947 |
Merge tag 'mfd-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Updates:
- Add Core, Regulator, Onkey and Battery Charger support for the NXP
PF1550 Power Management IC (PMIC)
- Introduce __SMC_KEY macro to fix GCC 15.2.1 errors in macsmc
- Add board definitions for TQMxCU1-HPCM and TQMxCU2-HPCM to the
tqmx86 driver
- Add support for Broadcom BCM2712 SoC to the bcm2835-pm driver
- Hook up the qnap-mcu-eeprom sub-device to qnap-mcu
Fixes:
- Enable compile testing for the Altera SOCFPGA System Manager driver
- Fix device reference leak in altr_sysmgr_regmap_lookup_by_phandle()
- Reserve the unused second I2C address for DA9063 to prevent
userspace interference
- Fix resource leak in da9055_device_init() by calling
regmap_del_irq_chip() in the error path
- Fix potential IRQ chip conflict when probing multiple MAX77620
devices by using devm_kmemdup for regmap_irq_chip
- Return -EPROBE_DEFER when a syscon devuice is not found to allow
deferred probing
- Update email address for the PF1550 PMIC driver in MAINTAINERS
- Correct file entry for PF1550 MFD driver in MAINTAINERS from
pfd1550.h to pf1550.h
- Calculate checksum on the actual number of received bytes in
qnap-mcu for error messages
- Use -EPROTO instead of -EIO for checksum errors in qnap-mcu
- Add proper error handling for command errors (e.g., "@8", "@9") in
qnap-mcu
- Fix missing irq_domain_remove() in error path of
mt63{58,97}_irq_init()
Cleanups:
- Mark SMC write buffer arguments as const in apple_smc_write(),
apple_smc_rw(), and apple_smc_write_atomic()
- Simplify the error handling path in da9055_device_init() by
removing a redundant mfd_remove_devices() call
- Use regmap_reg_range() and a real one-element array for
pmic_status_range in rohm-bd718x7 for cleaner initialization
- Remove select I2C_K1 from MFD_SPACEMIT_P1 to avoid build failures
when I2C_K1's dependencies are disabled
- Remove unneeded semicolon from ls2k_bmc_recover_pci_data()
- Drop OF dependency for MFD_MAX5970 in Kconfig to allow wider
compile testing and non-OF systems
- Make OF ID table style consistent in simple-mfd-i2c driver
- Update header inclusions in simple-mfd-i2c to follow IWYU (Include
What You Use) principle
- Move checksum verification logic to a separate function in qnap-mcu
- Use chained IRQs for S2MPG10 in the Samsung SEC driver to simplify
interrupt handling
- Drop a stray semicolon from sec-irq.c
Removals:
- Remove the unused TI WL1273 FM radio core driver
- Remove the unused wl1273-core.h header and tidy up its reference in
documentation
Device tree bindings:
- Add Device Tree binding for the NXP PF1550 PMIC
- Add missing GPIO pins and supply properties to the Silergy SY7636A
PMIC binding
- Add interrupt-controller property to the Maxim MAX77705 binding for
sub-device interrupt source determination
- Add Device Tree binding for the Renesas R2A11302FT PMIC
- Allow the wakeup-source property in the Dialog DA9063 binding
- Make interrupt-related properties optional in the TI TPS65910 PMIC
binding
- Document the Qualcomm PMIV0104 PMIC compatible string
- Document the Qualcomm PM7550 PMIC compatible string
- Enable power button subnode for TWL603x in the TI TWL binding
- Convert the Dialog DA9052/53 I2C binding from .txt to .yaml format,
including compatible string fallback and interrupt properties
- Document control-scb and sysreg-scb syscons on pic64gx with
fallback compatibles
- Document sama7g5-sfrbu and sama7d65-sfrbu syscons with fallback to
atmel,sama5d2-sfrbu
- Fix LEDs node schema in fsl,mc13xxx binding by adding led@ child
nodes and missing properties
- Add mt7981-topmisc compatible string to the syscon binding"
* tag 'mfd-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (42 commits)
mfd: sec: Drop a stray semicolon
mfd: qnap-mcu: Hook up the EEPROM sub-device
dt-bindings: mfd: syscon: Add mt7981-topmisc
dt-bindings: mfd: fsl,mc13xxx: Fix LEDs node schema
mfd: mt6358-irq: Fix missing irq_domain_remove() in error path
mfd: mt6397-irq: Fix missing irq_domain_remove() in error path
dt-bindings: mfd: Document syscons falling back to atmel,sama5d2-sfrbu
dt-bindings: mfd: Document control-scb and sysreg-scb on pic64gx
dt-bindings: mfd: Convert dlg,da9052-i2c.txt to yaml format
mfd: sec: Use chained IRQs for s2mpg10
mfd: qnap-mcu: Add proper error handling for command errors
mfd: qnap-mcu: Move checksum verification to its own function
mfd: qnap-mcu: Use EPROTO in stead of EIO on checksum errors
mfd: qnap-mcu: Calculate the checksum on the actual number of bytes received
mfd: simple-mfd-i2c: Don't use "proxy" headers
mfd: simple-mfd-i2c: Make ID table style consistent
mfd: Kconfig: Drop OF dependency on MFD_MAX5970
mfd: ls2kbmc: Remove unneeded semicolon from ls2k_bmc_recover_pci_data()
dt-bindings: mfd: twl: Enable power button also for TWL603X
MAINTAINERS: Adjust file entry in NXP PF1550 PMIC MFD DRIVER
...
|
||
|
Thomas Hellström
|
aa833fc394 |
drm/xe: Fix duplicated put due to merge resolution
An incorrect backmerge resolution resulted in an
incorrect duplicate put. Fix.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/dri-devel/CAHk-=whaiMayMx=LrL7P119MLBX6exM_mEu4S2uBRT+xWQ-mbA@mail.gmail.com/
Fixes: Fixes:
|
||
|
Linus Torvalds
|
dd463c51a3 |
Merge tag 'mmc-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Allow more host caps to be modified through debugfs
- Skip to set the default 200mA SD current limit
MMC host:
- Convert a few more DT bindings to the DT schema
- dw_mmc: Add Shawn Lin as co-maintainer for the dw_mmc drivers
- dw_mmc-rockchip:
- Add memory clock auto-gating support
- Add support for the RK3506 variant
- meson-mx-sdio:
- Ignore disabled "mmc-slot" child-nodes
- Refactoring and general code improvements
- renesas_sdhi:
- Enable bigger data ports where available
- Manage reset in probe and during system-wide suspend/resume
- sdhci-brcmstb:
- Add support for the BCM72116 and BCM74371 variants
- Save/restore registers during system-wide suspend/resume
- sdhci-msm:
- Add support for the sm8750 and the Kaanapali variants
- Avoid early clock doubling during HS400 transition
- sdhci-of-dwcmshc:
- Add command queue support for Rockchip SOCs
- Add support for the Eswin EIC7700 variant"
* tag 'mmc-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (40 commits)
mmc: sdhci-of-dwcmshc: reduce CIT for better performance
mmc: sdhci-of-dwcmshc: Disable internal clock auto gate for Rockchip SOCs
mmc: sdhci-msm: Avoid early clock doubling during HS400 transition
MAINTAINERS: Add Shawn Lin as co-maintainer for dw_mmc drivers
mmc: sdhci-of-dwcmshc: Fix command queue support for RK3576
mmc: renesas_sdhi: Add suspend/resume hooks
mmc: renesas_sdhi: Switch to SYSTEM_SLEEP_PM_OPS()/RUNTIME_PM_OPS() and pm_ptr()
mmc: renesas_sdhi: Deassert the reset signal on probe
dt-bindings: mmc: am654: Simplify dma-coherent property
mmc: meson-mx-sdio: Ignore disabled "mmc-slot" child-nodes
mmc: meson-mx-sdio: Fix indentation in meson_mx_mmc_irq_thread()
mmc: meson-mx-sdio: Use dev_err_probe() where appropriate
mmc: meson-mx-sdio: Use devm_mmc_alloc_host() helper
mmc: meson-mx-sdio: Refactor internal clock initialization
mmc: meson-mx-sdio: Use devm_clk_get_enabled()
mmc: meson-mx-sdio: Switch to regmap for register access
mmc: core: add WQ_PERCPU to alloc_workqueue users
mmc: dw_mmc-rockchip: Add memory clock auto-gating support
mmc: omap: add WQ_PERCPU to alloc_workqueue users
mmc: mtk-sd: replace use of system_wq with system_percpu_wq
...
|
||
|
Thomas Hellström
|
3f1c07fc21 |
Merge drm/drm-next into drm-xe-next-fixes
Backmerging to be able do to a clean PR. Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> |
||
|
Linus Torvalds
|
52206f82d9 |
Merge tag 'pmdomain-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson: "pmdomain core: - Allow power-off for out-of-band wakeup-capable devices - Drop the redundant call to dev_pm_domain_detach() for the amba bus - Extend the genpd governor for CPUs to account for IPIs pmdomain providers: - bcm: Add support for BCM2712 - mediatek: Add support for MFlexGraphics power domains - mediatek: Add support for MT8196 power domains - qcom: Add RPMh power domain support for Kaanapali - rockchip: Add support for RV1126B pmdomain consumers: - usb: dwc3: Enable out of band wakeup for i.MX95 - usb: chipidea: Enable out of band wakeup for i.MX95" * tag 'pmdomain-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (26 commits) pmdomain: Extend the genpd governor for CPUs to account for IPIs smp: Introduce a helper function to check for pending IPIs pmdomain: mediatek: convert from clk round_rate() to determine_rate() amba: bus: Drop dev_pm_domain_detach() call pmdomain: bcm: bcm2835-power: Prepare to support BCM2712 pmdomain: mediatek: mtk-mfg: select MAILBOX in Kconfig pmdomain: mediatek: Add support for MFlexGraphics pmdomain: mediatek: Fix build-errors cpuidle: psci: Replace deprecated strcpy in psci_idle_init_cpu pmdomain: rockchip: Add support for RV1126B pmdomain: mediatek: Add support for MT8196 HFRPSYS power domains pmdomain: mediatek: Add support for MT8196 SCPSYS power domains pmdomain: mediatek: Add support for secure HWCCF infra power on pmdomain: mediatek: Add support for Hardware Voter power domains pmdomain: qcom: rpmhpd: Add RPMh power domain support for Kaanapali usb: dwc3: imx8mp: Set out of band wakeup for i.MX95 usb: chipidea: ci_hdrc_imx: Set out of band wakeup for i.MX95 usb: chipidea: core: detach power domain for ci_hdrc platform device pmdomain: core: Allow power-off for out-of-band wakeup-capable devices PM: wakeup: Add out-of-band system wakeup support for devices ... |
||
|
Linus Torvalds
|
500920fa76 |
Merge tag 'gpio-updates-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver, lots of various updates to existing ones, some
refactoring support for new models and misc tweaks and fixes.
The biggest new feature in GPIO core is adding support for managed,
enable-counted sharing of GPIO pins, something that - until now - was
only hacked around with the GPIOD_FLAGS_BIT_NONEXCLUSIVE request flag
which basically allowed drivers to "fight it out" for the descriptor
and provided no synchronization. It was enabled on Qualcomm platforms
(and thus is enabled on arm64 defconfig) and I plan on removing
GPIOD_FLAGS_BIT_NONEXCLUSIVE once all drivers using it are switched to
the new mechanism.
GPIO core:
- add proper support for shared GPIOs that's aiming to replace the
current sharing mechanism (which provides no synchronization ot
enable counting) and enable it for Qualcomm platforms
- improve the software node GPIO lookup by using the fwnode
representation instead of the software node's name which was prone
to bugs (GPIO controllers don't have to use the software node's
name as their kernel label)
- remove the last user of legacy-of-mm-gpiochip.h and drop the header
- move closer to removing the legacy gpio_request_one() routine
- rename some symbols for consistency
- shrink GPIO printk() helpers by reusing existing code
- remove some redundant kernel messages
- use min() instead of min_t() in GPIO ACPI code
- use system_percpu_wq instead of system_wq in GPIO character device
code
New drivers:
- add a driver for the QIXIS FPGA GPIO controller
Driver improvements:
- use modernized variants of power management macros across a wide
array of drivers in order to avoid having to use the __maybe_unused
attribute
- convert gpio-elkhartlake and reset-gpio to using the auxiliary bus
instead of the platform bus as they are not really described in
firmware
- use lock guards and update symbol prefixes in gpio-mmio
- support the bryx radio interface kit in gpio-mpsse + refactor the
driver
- use software nodes for configuring the reset-gpio driver, including
setting up the reference to the shared "reset" pin
- check and propagate the return value of gpiod_set_value() to
user-space in gpio-virtuser (this was previously not possible as
this function returned void)
- extend the gpio-regmap helper with more features (bypass cache for
aliased inputs, force writes for aliased data registers, add a new
configuration parameter)
- remove unneeded includes from gpio-aspeed and gpio-latch
- add support for Tegra410 to gpio-tegra186
- replace PCI-specific PM with generic device-level PM in gpio-bt8xx
- use dynamic GPIO range allocation in gpio-loongson-64bit
- improve handling of level-triggered interrupts in gpio-pca953x
- add suspend/resume support to gpio-fxl6408
- add support for more models to gpio-menz127
- optimize gpio-mvebu interrupt handling by avoiding unnecessary
calls to mvebu_gpio_irq_handler()
- make locking more consistent in gpio-grgpio
Device-tree bindings:
- document new NXP and Microchip models
Documentation:
- add a comprehensive compatibility and feature list for
gpio-pca953x, which is a great addition as it's probably the most
commonly used GPIO expander driver
- kernel-doc tweaks
Late fixes:
- use BYTE_CTRL_MODE for 2K2000/3000 models in gpio-loongson"
* tag 'gpio-updates-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (80 commits)
gpio: loongson: Switch 2K2000/3000 GPIO to BYTE_CTRL_MODE
gpio: regmap: fix kernel-doc notation
gpio: shared: fix a deadlock
gpio: shared-proxy: set suppress_bind_attrs
gpio: shared: ignore GPIO hogs when traversing the device tree
gpio: shared: ignore special __symbols__ node when traversing device tree
gpio: shared: handle the reset-gpios corner case
gpio: zynq: Use modern PM macros
gpio: xilinx: Use modern PM macros
gpio: xgene: Use modern PM macros
gpio: uniphier: Use modern PM macros
gpio: tqmx86: Use modern PM macros
gpio: pch: Use modern PM macros
gpio: omap: Use modern PM macros
gpio: msc313: Use modern PM macros
gpio: mlxbf2: Use modern PM macros
gpio: ml-ioh: Use modern PM macros
gpio: pl061: Use modern PM macros
gpio: htc-egpio: Use modern PM macros
gpio: brcmstb: Use modern PM macros
...
|
||
|
Linus Torvalds
|
205f1a0d18 |
Merge tag 'firewire-updates-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
"This includes two changes for core functions, which affects all use
cases of this subsystem:
- Handle per-device interoperability quirks
Some devices have quirks affecting interoperability. To identify
such quirks at an early stages of device detection, the step for
reading the configuration ROM contents has been changed. As a side
effect, the entire detection process is now performed at the basic
transaction speed (S100), without a trial to probe higher
supported speeds.
With this change, the following devices should now work with fewer
issues:
- TASCAM FW-1884, FW-1804, and FW-1082
- MOTU Audio Express
- Safer removals of host card
There was a race condition between host card removal and handling
of bus reset events in the workqueue. This appears to be a long
standing issue, and recent changes to use more workqueues escalate
it.
To solve it, a new callback has been added to the 1394 OHCI PCI
driver to unregister the interrupt sources and wait for workqueue
completions when removing a card instance"
* tag 'firewire-updates-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: abort pending transactions at card removal
firewire: core: add WQ_UNBOUND to alloc_workqueue users
firewire: core: clear sources of hardware interrupt at card removal
firewire: core: code refactoring to find and pop transaction entry
firewire: core: code refactoring to remove transaction entry
firewire: core: use cleanup function to release cached configuration ROM
ALSA: firewire-tascam: reserve resources for transferred isochronous packets at S400
firewire: core: handle device quirk of TASCAM FW-1884/FW-1804/FW-1082
firewire: core: determine transaction speed after detecting quirks
firewire: core: code refactoring to compute transaction speed
firewire: core: handle device quirk of MOTU Audio Express
firewire: core: detect device quirk when reading configuration ROM
|
||
|
Linus Torvalds
|
02892f90a9 |
Merge tag 'hwmon-for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Apple Silicon SMC
- TSC1641 I2C power monitor
- MPS MP9945
- MAX17616
- MP2925 and MP2929
Added support for new devices to existing drivers:
- dell-smm: Add Dell G5 5505 to fan control whitelist
- aspeed-g6-pwm-tach: Support for AST2700
- asus-ec-sensors: Support for ROG STRIX X470-I GAMING, ROG STRIX
X870-F GAMING WIFI, ROG STRIX X870E-H GAMING WIFI7, and Pro WS
TRX50-SAGE WIFI
- k10temp: Support for AMD Steam Deck APU ID
- pmbus/isl68137: Support for raa229141
- aht10: Support for dht20
- adt7410: Support for ADT7422
- peci: Support for Intel Emerald Rapids
- nct6775: Support for ASUS ROG STRIX X870E-H GAMING WIFI7
- pmbus/max34440: Support for ADPM12200
- ntc-thermistor: Support for Murata ncp18wm474
Infrastructure updates:
- Utilize subsystem locking in various drivers
- ltc4282, ltc2947: Use the new energy64 attribute
Bug fixes:
- Various drivers: Fixes to avoid TOCTOU, mostly in macro functions
evaluating parameters multiple times, as well as missing locks
- max6697: Fix regmap leak on probe failure
- sy7636a: Fix regulator_enable resource leak on error path
- asus-ec-sensors: Correct Pro WS TRX50-SAGE WIFI entry
Other changes and improvements:
- w83781d, lm78: Drop REALLY_SLOW_IO
- Fix broken datasheet links in various drivers
And various other minor fixes and improvements"
* tag 'hwmon-for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (110 commits)
hwmon: (dell-smm) Add Dell G5 5505 to fan control whitelist
hwmon: (max16065) Use local variable to avoid TOCTOU
hwmon: (w83l786ng) Convert macros to functions to avoid TOCTOU
hwmon: (max6697) fix regmap leak on probe failure
hwmon/w83781d: Drop REALLY_SLOW_IO setting
hwmon/lm78: Drop REALLY_SLOW_IO setting
hwmon: sy7636a: Fix regulator_enable resource leak on error path
hwmon: (adm1026) Convert macros to functions to avoid TOCTOU
hwmon: (adm1029) Add locking to avoid TOCTOU
hwmon: (lm87) Convert macros to functions to avoid TOCTOU
hwmon: (asus-ec-sensors) correct Pro WS TRX50-SAGE WIFI entry
hwmon: (vt8231) Convert macros to functions to avoid TOCTOU
hwmon: (emc2103) Add locking to avoid TOCTOU
hwmon: (aspeed-g6-pwm-tach): Add AST2700 compatible string
dt-bindings: hwmon: Add AST2700 compatible
hwmon: (asus-ec-sensors) add ROG STRIX X470-I GAMING
hwmon: (vt1211) Convert macros to functions to avoid TOCTOU
hwmon: (k10temp) Add AMD Steam Deck APU ID
hwmon: Add Apple Silicon SMC hwmon driver
Documentation/hwmon: Fix broken datasheet links for zl6100
...
|
||
|
Linus Torvalds
|
fca5327eaa |
Merge tag 'gnss-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss
Pull GNSS updates from Johan Hovold: - add support for claiming and deasserting the safeboot pin found on recent u-blox receivers - fix timepulse pin description in the devicetree binding ... and some related binding updates * tag 'gnss-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss: dt-bindings: gnss: fix timepulse description dt-bindings: gnss: u-blox: use lowercase company name dt-bindings: gnss: u-blox: use open-drain reset and safeboot in example gnss: ubx: add support for the safeboot gpio dt-bindings: gnss: u-blox: add safeboot gpio |
||
|
Linus Torvalds
|
fa5ef10561 |
Merge tag 'spi-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This release is almost entirely new drivers, with a couple of small
changes in generic code.
The biggest individual update is a rename of the existing Microchip
driver and the addition of a new driver for the silicon SPI controller
in their PolarFire SoCs. The overlap between the soft IP supported by
the current driver and this new one is regrettably all in the IP and
not in the register interface offered to software.
- Add a time offset parameter for offloads, allowing them to be
defined in relation to each other. This is useful for IIO type
applcations where you trigger an operation then read the result
after a delay.
- Add a tracepoint for flash exec_ops, bringing the flash support
more in line with the debuggability of vanilla SPI.
- Support for Airoha EN7523, Arduino MCUs, Aspeed AST2700, Microchip
PolarFire SPI controllers, NXP i.MX51 ECSPI target mode, Qualcomm
IPQ5414 and IPQ5332, Renesas RZ/T2H, RZ/V2N and RZ/2NH and SpacemiT
K1 QuadSPI.
There's also a small set of ASoC cleanups that I mistakenly applied to
the SPI tree and then put more stuff on top of before it was brought
to my attention, sorry about that"
* tag 'spi-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (80 commits)
spi: microchip-core: Refactor FIFO read and write handlers
spi: ch341: fix out-of-bounds memory access in ch341_transfer_one
spi: microchip-core: Remove unneeded PM related macro
spi: microchip-core: Use SPI_MODE_X_MASK
spi: microchip-core: Utilise temporary variable for struct device
spi: microchip-core: Replace dead code (-ENOMEM error message)
spi: microchip-core: use min() instead of min_t()
spi: dt-bindings: airoha: add compatible for EN7523
spi: airoha-snfi: en7523: workaround flash damaging if UART_TXD was short to GND
spi: dt-bindings: renesas,rzv2h-rspi: Document RZ/V2N SoC support
spi: dt-bindings: renesas,rzv2h-rspi: Document RZ/V2N SoC support
spi: microchip: Enable compile-testing for FPGA SPI controllers
spi: Fix potential uninitialized variable in probe()
spi: rzv2h-rspi: add support for RZ/T2H and RZ/N2H
spi: dt-bindings: renesas,rzv2h-rspi: document RZ/T2H and RZ/N2H
spi: rzv2h-rspi: add support for loopback mode
spi: rzv2h-rspi: add support for variable transfer clock
spi: rzv2h-rspi: add support for using PCLK for transfer clock
spi: rzv2h-rspi: make transfer clock rate finding chip-specific
spi: rzv2h-rspi: avoid recomputing transfer frequency
...
|
||
|
Linus Torvalds
|
0a9431fa74 |
Merge tag 'regulator-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"This is a relatively busy release for the regulator API, as well as a
good collection of new drivers we've got a little bit of core work and
a bunch of cleanup throughout the subsystem:
- Support for propagating undervoltage events to child regulators
- Undo enables done on supplies when setting enabling regulators via
constraints fails
- Pull in some gpiolib changes adding support for shared GPIOs to the
gpiolib core, using them to replace the open coded variant of this
that we've had in the regulator API for a long time
- Support for Fitipower FP9931 and JD9330, Mediatek MT6316, MT6363
and MT6373, NXP PF1550 and Qualcomm PMH01XX and PMCX0102
The PF1550 support was originally going to go via the MFD tree but
Krzysztof's cleanup work overlapped with it so I pulled in Lee's
signed tag with support for the device"
* tag 'regulator-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (50 commits)
regulator: fp9931: Fix spelling mistake "failid" -> "failed"
regulator: core: Protect regulator_supply_alias_list with regulator_list_mutex
regulator: pf9453: Constify pointers to 'regulator_desc' wrap struct
regulator: pca9450: Constify pointers to 'regulator_desc' wrap struct
regulator: mt6358: Constify pointers to 'regulator_desc' wrap struct
regulator: bd96801: Constify pointers to 'regulator_desc' wrap struct
regulator: bd718x7: Constify pointers to 'regulator_desc' wrap struct
regulator: bd71828: Constify pointers to 'regulator_desc' wrap struct
regulator: bd71815: Constify pointers to 'regulator_desc' wrap struct
regulator: Use container_of_const() when all types are const
regulator: pca9450: Fix error code in probe()
regulator: qcomm-labibb: replace use of system_wq with system_dfl_wq
regulator: Add FP9931/JD9930 driver
dt-bindings: regulator: Add Fitipower FP9931/JD9930
dt-bindings: vendor-prefixes: Add Fitipower
regulator: make the subsystem aware of shared GPIOs
regulator: renesas-usb-vbus-regulator: Remove unused headers
regulator: pca9450: Add support for setting debounce settings
regulator: dt-bindings: pca9540: add debounce timer configuration
regulator: core: disable supply if enabling main regulator fails
...
|
||
|
Linus Torvalds
|
ba1401f9cc |
Merge tag 'regmap-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"Another small update for regmap, we have one new feature plus a little
bit of cleanup:
- Support for sparseness information in the flat cache, allowing
users that really need the performance properties it provides to
benefit from the interface and startup time improvements that
sparsness provides without needing to go all the way to a more
fancy data structure
- Cleanup work from Andy Shevchenko, refactoring the cache interface
in preparation for some future stuff he's working on"
* tag 'regmap-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: sdw-mbq: Reorder regmap_mbq_context struct for better packing
regmap: i3c: Use ARRAY_SIZE()
regcache: maple: Split ->populate() from ->init()
regcache: flat: Split ->populate() from ->init()
regcache: flat: Remove unneeded check and error message for -ENOMEM
regcache: rbtree: Split ->populate() from ->init()
regcache: Add ->populate() callback to separate from ->init()
regmap: warn users about uninitialized flat cache
regmap: add flat cache with sparse validity
|
||
|
Linus Torvalds
|
edd2b9832d |
Merge tag 'mtd/for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull mtd updates from Miquel Raynal:
"Core MTD changes:
- We must ignore error -ENOENT from parsers on subpartitions which is
a legitimate return value
- PM support is added to the intel-dg driver
Raw NAND changes:
- The major change in this is the support for the Allwinner H616 NAND
controller, which lead to numerous changes and cleanups in the
driver.
- Another notable change in this driver is the use of field_get() and
field_prep(), but since the global support for this helpers is
going to be merged in the same release as we start using these
helpers, we undefine them in the first place to avoid warnings.
- Marvell drivers layout handling changes have also landed, they fix
previous definitions and abuses that have been made previously,
which implied to relax the ECC parameters validation in the core a
bit.
- The Cadence NAND controller driver gets NV-DDR interface support.
SPI NAND changes:
- Support for FudanMicro FM25S01BI3 and ESMT F50L1G41LC is added.
SPI NOR changes:
- Fix SMPT parsing for S25FS-S flash family. They report variable
dummy cycles for reads. This results in the default of 0 being
used. This works for other Infineon chips, but not for the S25FS-S
family. They need 8 dummy cycles. Add fixup hooks to specify that.
Also add fixup hooks to fix incorrect map ID data in SFDP.
- Add support for a bunch of Winbond flashes. Their block protection
information is not discoverable, so they need to have an entry in
the flash tables to describe that.
- Some cleanups for Micron flash support.
- Add support for Micron mt35xu01gbba.
- Some SPI controllers like the Intel one on the PCI bus do not
support the read CR opcode (0x35). Do not use the opcode if the
controller does not support it.
Aside from these main changes, there is the usual load of API updates,
kdoc fixes, potential memory leaks fixes, etc"
* tag 'mtd/for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (51 commits)
mtd: sm_ftl: Fix typo in comment in sm_read_lba
mtd: sm_ftl: Replace deprecated strncpy with sysfs_emit in sm_attr_show
mtd: lpddr_cmds: fix signed shifts in lpddr_cmds
mtd: docg3: fix kernel-doc warnings
mtd: spinand: add support for FudanMicro FM25S01BI3
mtd: rawnand: renesas: Handle devm_pm_runtime_enable() errors
mtd: nand: realtek-ecc: Fix Kconfig dependencies
mtd: rawnand: sunxi: #undef field_{get,prep}() before local definition
mailmap: update Pratyush Yadav's email address
mtd: spi-nor: core: Check read CR support
mtd: spi-nor: micron-st: add TODO for fixing mt35xu02gcba
mtd: spi-nor: micron-st: add mt35xu01gbba support
mtd: spi-nor: micron-st: use SFDP of mt35xu512aba
mtd: spi-nor: micron-st: move set_octal_dtr to late_init()
mtd: spi-nor: micron-st: rename the die_late_init functions
mtd: spinand: esmt: add support for F50L1G41LC
mtd: rawnand: lpc32xx_slc: Convert to use devm_gpiod_get_optional()
mtd: mtdpart: ignore error -ENOENT from parsers on subpartitions
mtd: maps: pcmciamtd: fix potential memory leak in pcmciamtd_detach()
mtd: spi-nor: spansion: SMPT fixups for S25FS-S
...
|
||
|
Linus Torvalds
|
77956cf364 |
Merge tag 'pwm/for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm updates from Uwe Kleine-König:
"In addition to the usual mix of core cleanups, driver changes, minor
fixes and device tree updates the highlight this cycle is Rust support
for the core and a first Rust driver both provided by Michal
Wilczynski.
Michal wrote about these changes on
https://mwilczynski.dev/posts/bringing-rust-to-the-pwm-subsystem/
which is a nice read"
* tag 'pwm/for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (22 commits)
pwm: rzg2l-gpt: Allow checking period_tick cache value only if sibling channel is enabled
pwm: bcm2835: Make sure the channel is enabled after pwm_request()
pwm: mediatek: Make use of struct_size macro
pwm: mediatek: Remove unneeded semicolon
pwm: airoha: Add support for EN7581 SoC
pwm: mediatek: Convert to waveform API
pwm: max7360: Clean MAX7360 code
pwm: Drop unused function pwm_apply_args()
pwm: Use %u to printf unsigned int pwm_chip::npwm and pwm_chip::id
pwm: Simplify printf to emit chip->npwm in $debugfs/pwm
pwm: th1520: Use module_pwm_platform_driver! macro
pwm: th1520: Fix clippy warning for redundant struct field init
pwm: Fix Rust formatting
dt-bindings: pwm: thead: Add T-HEAD TH1520 PWM controller
pwm: Add Rust driver for T-HEAD TH1520 SoC
rust: pwm: Fix broken intra-doc link
rust: pwm: Drop wrapping of PWM polarity and state
rust: pwm: Add module_pwm_platform_driver! macro
rust: pwm: Add complete abstraction layer
rust: pwm: Add Kconfig and basic data structures
...
|
||
|
Linus Torvalds
|
04265849c8 |
Merge tag 'chrome-platform-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"Improvements:
- Support legacy probe behavior in cros_ec_lightbar and
cros_ec_sensorhub
Fixes:
- Don't fall back to legacy probe behavior if it isn't a legacy
device in cros_usbpd_notify
- Fix an UAF after unbinding driver in cros_ec_ishtp"
* tag 'chrome-platform-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: sensorhub: Support devices without FIFO_INT_ENABLE
platform/chrome: cros_ec_ishtp: Fix UAF after unbinding driver
platform/chrome: cros_ec_lightbar: Check if ec supports suspend commands
platform/chrome: cros_usbpd_notify: defer probe when parent EC driver isn't ready
|
||
|
Linus Torvalds
|
2aa680df68 |
Merge tag 'sound-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The majority of changes at this time were about ASoC with a lot of
code refactoring works. From the functionality POV, there isn't much
to see, but we have a wide range of device-specific fixes and updates.
Here are some highlights:
- Continued ASoC API cleanup work, spanned over many files
- Added a SoundWire SCDA generic class driver with regmap support
- Enhancements and fixes for Cirrus, Intel, Maxim and Qualcomm.
- Support for ASoC Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830
- Usual HD-audio and USB-audio quirks and fixups
- Support for Onkyo SE-300PCIE, TASCAM IF-FW/DM MkII
Some gpiolib changes for shared GPIOs are included along with this PR
for covering ASoC drivers changes"
* tag 'sound-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (739 commits)
ALSA: hda/realtek: Add PCI SSIDs to HP ProBook quirks
ALSA: usb-audio: Simplify with usb_endpoint_max_periodic_payload()
ALSA: hda/realtek: fix mute/micmute LEDs don't work for more HP laptops
ALSA: rawmidi: Fix inconsistent indenting warning reported by smatch
ALSA: dice: fix buffer overflow in detect_stream_formats()
ASoC: codecs: Modify awinic amplifier dsp read and write functions
ASoC: SDCA: Fixup some more Kconfig issues
ASoC: cs35l56: Log a message if firmware is missing
ASoC: nau8325: Delete a stray tab
firmware: cs_dsp: Add test cases for client_ops == NULL
firmware: cs_dsp: Don't require client to provide a struct cs_dsp_client_ops
ASoC: fsl_micfil: Set channel range control
ASoC: fsl_micfil: Add default quality for different platforms
ASoC: intel: sof_sdw: Add codec_info for cs42l45
ASoC: sdw_utils: Add cs42l45 support functions
ASoC: intel: sof_sdw: Add ability to have auxiliary devices
ASoC: sdw_utils: Move codec_name to dai info
ASoC: sdw_utils: Add codec_conf for every DAI
ASoC: SDCA: Add terminal type into input/output widget name
ASoC: SDCA: Align mute controls to ALSA expectations
...
|
||
|
Uma Shankar
|
860daa4b0d |
drm/i915/color: Enable Plane Color Pipelines
Expose color pipeline and add ability to program it.
v2: Set bit to enable multisegmented lut
v3: s/drm_color_lut_32/drm_color_lut32 (Simon)
v4: - Fix dsb programming
- Remove multi-segment LUT, they will be added in later patches
- Add pipeline only to TGL+
- Code Refactor
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20251203085211.3663374-16-uma.shankar@intel.com
|
||
|
Chaitanya Kumar Borah
|
65db7a1f9c |
drm/i915/color: Add 3D LUT to color pipeline
Add helpers to program the 3D LUT registers and arm them. LUT_3D_READY in LUT_3D_CLT is cleared off by the HW once the LUT buffer is loaded into it's internal working RAM. So by the time we try to load/commit new values, we expect it to be cleared off. If not, log an error and return without writing new values. Do it only when writing with MMIO. There is no way to read register within DSB execution. v2: - Add information regarding LUT_3D_READY to commit message (Jani) - Log error instead of a drm_warn and return without committing changes if 3DLUT HW is not ready to accept new values. - Refactor intel_color_crtc_has_3dlut() Also remove Gen10 check (Suraj) v3: - Addressed review comments (Suraj) Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patch.msgid.link/20251203085211.3663374-15-uma.shankar@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> |
||
|
Chaitanya Kumar Borah
|
55b0f3cd09 |
drm/i915/color: Add registers for 3D LUT
Add registers needed to program 3D LUT v2: - Follow convention documented in i915_reg.h (Jani) - Removing space in trailer (Suraj) - Move registers to intel_color_regs.h BSpec: 69378, 69379, 69380 Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Link: https://patch.msgid.link/20251203085211.3663374-14-uma.shankar@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> |
||
|
Uma Shankar
|
bf0fd73754 |
drm/i915/color: Program Plane Post CSC Registers
Extract the LUT and program plane post csc registers. v2: Add DSB support v3: Add support for single segment 1D LUT v4: - s/drm_color_lut_32/drm_color_lut32 (Simon) - Move declaration to beginning of the function (Suraj) - Remove multisegmented code, add it later - Remove dead code for SDR planes, add it later v5: - Fix iterator issues v6: Removed redundant variable (Suraj) Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://patch.msgid.link/20251203085211.3663374-13-uma.shankar@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> |
||
|
Uma Shankar
|
82caa1c881 |
drm/i915/color: Program Pre-CSC registers
Add callback to program Pre-CSC LUT for TGL and beyond v2: Add DSB support v3: Add support for single segment 1D LUT color op v4: - s/drm_color_lut_32/drm_color_lut32/ (Simon) - Change commit message (Suraj) - Improve comments (Suraj) - Remove multisegmented programming, to be added later - Remove dead code for SDR planes, add when needed BSpec: 50411, 50412, 50413, 50414 Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://patch.msgid.link/20251203085211.3663374-12-uma.shankar@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> |
||
|
Uma Shankar
|
3b7476e786 |
drm/i915/color: Add framework to program PRE/POST CSC LUT
Add framework that will help in loading LUT to Pre/Post CSC color blocks. v2: Add dsb support v3: Align enum names v4: Propagate change in lut data to crtc_state Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://patch.msgid.link/20251203085211.3663374-11-uma.shankar@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> |
||
|
Uma Shankar
|
05df71544c |
drm/i915: Add register definitions for Plane Post CSC
Add macros to define Plane Post CSC registers v2: - Add Plane Post CSC Gamma Multi Segment Enable bit - Add BSpec entries (Suraj) v3: - Fix checkpatch issues (Suraj) BSpec: 50403, 50404, 50405, 50406, 50409, 50410, Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com> Signed-off-by: Uma Shankar <uma.shankar@intel.com> Signed-off-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Link: https://patch.msgid.link/20251203085211.3663374-10-uma.shankar@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> |