Pull misc fixes from Andrew Morton:
"15 hotfixes. 11 are cc:stable and the remainder address post-6.16
issues or aren't considered necessary for -stable kernels. 13 of these
fixes are for MM.
The usual shower of singletons, plus
- fixes from Hugh to address various misbehaviors in get_user_pages()
- patches from SeongJae to address a quite severe issue in DAMON
- another series also from SeongJae which completes some fixes for a
DAMON startup issue"
* tag 'mm-hotfixes-stable-2025-09-17-21-10' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
zram: fix slot write race condition
nilfs2: fix CFI failure when accessing /sys/fs/nilfs2/features/*
samples/damon/mtier: avoid starting DAMON before initialization
samples/damon/prcl: avoid starting DAMON before initialization
samples/damon/wsse: avoid starting DAMON before initialization
MAINTAINERS: add Lance Yang as a THP reviewer
MAINTAINERS: add Jann Horn as rmap reviewer
mm/damon/sysfs: use dynamically allocated repeat mode damon_call_control
mm/damon/core: introduce damon_call_control->dealloc_on_cancel
mm: folio_may_be_lru_cached() unless folio_test_large()
mm: revert "mm: vmscan.c: fix OOM on swap stress test"
mm: revert "mm/gup: clear the LRU flag of a page before adding to LRU batch"
mm/gup: local lru_add_drain() to avoid lru_add_drain_all()
mm/gup: check ref_count instead of lru before migration
DRM Rust changes for v6.18
Alloc
- Add BorrowedPage type and AsPageIter trait
- Implement Vmalloc::to_page() and VmallocPageIter
- Implement AsPageIter for VBox and VVec
DMA & Scatterlist
- Add dma::DataDirection and type alias for dma_addr_t
- Abstraction for struct scatterlist and struct sg_table
DRM
- In the DRM GEM module, simplify overall use of generics, add
DriverFile type alias and drop Object::SIZE.
Nova (Core)
- Various register!() macro improvements (paving the way for lifting
it to common driver infrastructure)
- Minor VBios fixes and refactoring
- Minor firmware request refactoring
- Advance firmware boot stages; process Booter and patch its
signature, process GSP and GSP bootloader
- Switch development fimrware version to r570.144
- Add basic firmware bindings for r570.144
- Move GSP boot code to its own module
- Clean up and take advantage of pin-init features to store most of
the driver's private data within a single allocation
- Update ARef import from sync::aref
- Add website to MAINTAINERS entry
Nova (DRM)
- Update ARef import from sync::aref
- Add website to MAINTAINERS entry
Pin-Init
- Merge pin-init PR from Benno
- `#[pin_data]` now generates a `*Projection` struct similar to the
`pin-project` crate.
- Add initializer code blocks to `[try_][pin_]init!` macros: make
initializer macros accept any number of `_: {/* arbitrary code
*/},` & make them run the code at that point.
- Make the `[try_][pin_]init!` macros expose initialized fields via
a `let` binding as `&mut T` or `Pin<&mut T>` for later fields.
Rust
- Various methods for AsBytes and FromBytes traits
Tyr
- Initial Rust driver skeleton for ARM Mali GPUs.
- It can power up the GPU, query for GPU metatdata through MMIO and
provide the metadata to userspace via DRM device IOCTL (struct
drm_panthor_dev_query).
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: "Danilo Krummrich" <dakr@kernel.org>
Link: https://lore.kernel.org/r/DCUC4SY6SRBD.1ZLHAIQZOC6KG@kernel.org
Patch series "samples/damon: fix boot time enable handling fixup merge
mistakes".
First three patches of the patch series "mm/damon: fix misc bugs in DAMON
modules" [1] were trying to fix boot time DAMON sample modules enabling
issues. The issues are the modules can crash if those are enabled before
DAMON is enabled, like using boot time parameter options. The three
patches were fixing the issues by avoiding starting DAMON before the
module initialization phase.
However, probably by a mistake during a merge, only half of the change is
merged, and the part for avoiding the starting of DAMON before the module
initialized is missed. So the problem is not solved and thus the modules
can still crash if enabled before DAMON is initialized. Fix those by
applying the unmerged parts again.
Note that the broken commits are merged into 6.17-rc1, but also backported
to relevant stable kernels. So this series also needs to be merged into
the stable kernels. Hence Cc-ing stable@.
This patch (of 3):
Commit 0ed1165c37 ("samples/damon/wsse: fix boot time enable handling")
is somehow incompletely applying the origin patch [2]. It is missing the
part that avoids starting DAMON before module initialization. Probably a
mistake during a merge has happened. Fix it by applying the missed part
again.
Link: https://lkml.kernel.org/r/20250909022238.2989-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20250909022238.2989-2-sj@kernel.org
Link: https://lkml.kernel.org/r/20250706193207.39810-1-sj@kernel.org [1]
Link: https://lore.kernel.org/20250706193207.39810-2-sj@kernel.org [2]
Fixes: 0ed1165c37 ("samples/damon/wsse: fix boot time enable handling")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
pin-init changes for v6.18
Changed:
- `#[pin_data]` now generates a `*Projection` struct similar to the
`pin-project` crate.
- Add initializer code blocks to `[try_][pin_]init!` macros: make
initializer macros accept any number of `_: {/* arbitrary code */},` &
make them run the code at that point.
- Make the `[try_][pin_]init!` macros expose initialized fields via a
`let` binding as `&mut T` or `Pin<&mut T>` for later fields.
Upstream dev news:
- Released v0.0.10 before the changes included in this tag.
- Inform users of the impending rename from `pinned-init` to `pin-init`
(in the kernel the rename already happened).
- More CI improvements.
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
From: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250912174148.373530-1-lossin@kernel.org
After initializing a field in an initializer macro, create a variable
holding a reference that points at that field. The type is either
`Pin<&mut T>` or `&mut T` depending on the field's structural pinning
kind.
[ Applied fixes to devres and rust_driver_pci sample - Benno]
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Benno Lossin <lossin@kernel.org>
Adds a new sample driver `rust_scoped_debugfs` that demonstrates the
use of the scoped debugfs APIs.
The driver creates a `control` directory with two write-only files,
`create` and `remove`. Writing a name and a series of numbers to
`create` will create a new subdirectory under a `dynamic` directory.
This new subdirectory will contain files that expose the numbers as
atomic values.
Writing a name to `remove` will remove the corresponding subdirectory
from the `dynamic` directory.
This sample serves as an example of how to use the `debugfs::Scope`
and `debugfs::ScopedDir` APIs to create and manage debugfs entries
that are tied to the lifetime of a data structure.
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250904-debugfs-rust-v11-7-7d12a165685a@google.com
[ Rename "scoped_debugfs" -> "debugfs_scoped", fix up
Result<(), Error> -> Result. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Adds a new sample driver that demonstrates the debugfs APIs.
The driver creates a directory in debugfs and populates it with a few
files:
- A read-only file that displays a fwnode property.
- A read-write file that exposes an atomic counter.
- A read-write file that exposes a custom struct.
This sample serves as a basic example of how to use the `debugfs::Dir`
and `debugfs::File` APIs to create and manage debugfs entries.
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250904-debugfs-rust-v11-5-7d12a165685a@google.com
[ Change ACPI ID "LNUXDEBF" to "LNUXBEEF". - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Alice Ryhl <aliceryhl@google.com> says:
This series adds support for the `struct iov_iter` type. This type
represents an IO buffer for reading or writing, and can be configured
for either direction of communication.
In Rust, we define separate types for reading and writing. This will
ensure that you cannot mix them up and e.g. call copy_from_iter in a
read_iter syscall.
To use the new abstractions, miscdevices are given new methods read_iter
and write_iter that can be used to implement the read/write syscalls on
a miscdevice. The miscdevice sample is updated to provide read/write
operations.
Intended for Greg's miscdevice tree.
Link: https://lore.kernel.org/r/20250822-iov-iter-v5-0-6ce4819c2977@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change Device::vendor_id() to return a Vendor type, and change
DeviceId::from_id() to accept a Vendor type.
Use the new pci::Vendor in the various Rust for Linux callers who were
previously using bindings::PCI_VENDOR_ID_*.
Doing so also allows removing "use kernel::bindings" entirely from most
of the affected files here.
Also, mark vendor_id() as inline.
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Elle Rhumsaa <elle@weathered-steel.dev>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Link: https://lore.kernel.org/r/20250829223632.144030-6-jhubbard@nvidia.com
[ Replace "as a validated vendor" with "as [`Vendor`]". - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The second argument to the ioctl handlers is not a file handle any more.
Rename it to 'void *priv', to avoid misconceptions. This is particularly
important in the v4l2-pci-skeleton driver, as it is meant to be a base
for new drivers.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Pull non-MM updates from Andrew Morton:
"Significant patch series in this pull request:
- "squashfs: Remove page->mapping references" (Matthew Wilcox) gets
us closer to being able to remove page->mapping
- "relayfs: misc changes" (Jason Xing) does some maintenance and
minor feature addition work in relayfs
- "kdump: crashkernel reservation from CMA" (Jiri Bohac) switches
us from static preallocation of the kdump crashkernel's working
memory over to dynamic allocation. So the difficulty of a-priori
estimation of the second kernel's needs is removed and the first
kernel obtains extra memory
- "generalize panic_print's dump function to be used by other
kernel parts" (Feng Tang) implements some consolidation and
rationalization of the various ways in which a failing kernel
splats information at the operator
* tag 'mm-nonmm-stable-2025-08-03-12-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (80 commits)
tools/getdelays: add backward compatibility for taskstats version
kho: add test for kexec handover
delaytop: enhance error logging and add PSI feature description
samples: Kconfig: fix spelling mistake "instancess" -> "instances"
fat: fix too many log in fat_chain_add()
scripts/spelling.txt: add notifer||notifier to spelling.txt
xen/xenbus: fix typo "notifer"
net: mvneta: fix typo "notifer"
drm/xe: fix typo "notifer"
cxl: mce: fix typo "notifer"
KVM: x86: fix typo "notifer"
MAINTAINERS: add maintainers for delaytop
ucount: use atomic_long_try_cmpxchg() in atomic_long_inc_below()
ucount: fix atomic_long_inc_below() argument type
kexec: enable CMA based contiguous allocation
stackdepot: make max number of pools boot-time configurable
lib/xxhash: remove unused functions
init/Kconfig: restore CONFIG_BROKEN help text
lib/raid6: update recov_rvv.c zero page usage
docs: update docs after introducing delaytop
...
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Enable a set of Clippy lints: 'ptr_as_ptr', 'ptr_cast_constness',
'as_ptr_cast_mut', 'as_underscore', 'cast_lossless' and
'ref_as_ptr'
These are intended to avoid type casts with the 'as' operator,
which are quite powerful, into restricted variants that are less
powerful and thus should help to avoid mistakes
- Remove the 'author' key now that most instances were moved to the
plural one in the previous cycle
'kernel' crate:
- New 'bug' module: add 'warn_on!' macro which reuses the existing
'BUG'/'WARN' infrastructure, i.e. it respects the usual sysctls and
kernel parameters:
warn_on!(value == 42);
To avoid duplicating the assembly code, the same strategy is
followed as for the static branch code in order to share the
assembly between both C and Rust
This required a few rearrangements on C arch headers -- the
existing C macros should still generate the same outputs, thus no
functional change expected there
- 'workqueue' module: add delayed work items, including a
'DelayedWork' struct, a 'impl_has_delayed_work!' macro and an
'enqueue_delayed' method, e.g.:
/// Enqueue the struct for execution on the system workqueue,
/// where its value will be printed 42 jiffies later.
fn print_later(value: Arc<MyStruct>) {
let _ = workqueue::system().enqueue_delayed(value, 42);
}
- New 'bits' module: add support for 'bit' and 'genmask' functions,
with runtime- and compile-time variants, e.g.:
static_assert!(0b00010000 == bit_u8(4));
static_assert!(0b00011110 == genmask_u8(1..=4));
assert!(checked_bit_u32(u32::BITS).is_none());
- 'uaccess' module: add 'UserSliceReader::strcpy_into_buf', which
reads NUL-terminated strings from userspace into a '&CStr'
Introduce 'UserPtr' newtype, similar in purpose to '__user' in C,
to minimize mistakes handling userspace pointers, including mixing
them up with integers and leaking them via the 'Debug' trait. Add
it to the prelude, too
- Start preparations for the replacement of our custom 'CStr' type
with the analogous type in the 'core' standard library. This will
take place across several cycles to make it easier. For this one,
it includes a new 'fmt' module, using upstream method names and
some other cleanups
Replace 'fmt!' with a re-export, which helps Clippy lint properly,
and clean up the found 'uninlined-format-args' instances
- 'dma' module:
- Clarify wording and be consistent in 'coherent' nomenclature
- Convert the 'read!()' and 'write!()' macros to return a 'Result'
- Add 'as_slice()', 'write()' methods in 'CoherentAllocation'
- Expose 'count()' and 'size()' in 'CoherentAllocation' and add
the corresponding type invariants
- Implement 'CoherentAllocation::dma_handle_with_offset()'
- 'time' module:
- Make 'Instant' generic over clock source. This allows the
compiler to assert that arithmetic expressions involving the
'Instant' use 'Instants' based on the same clock source
- Make 'HrTimer' generic over the timer mode. 'HrTimer' timers
take a 'Duration' or an 'Instant' when setting the expiry time,
depending on the timer mode. With this change, the compiler can
check the type matches the timer mode
- Add an abstraction for 'fsleep'. 'fsleep' is a flexible sleep
function that will select an appropriate sleep method depending
on the requested sleep time
- Avoid 64-bit divisions on 32-bit hardware when calculating
timestamps
- Seal the 'HrTimerMode' trait. This prevents users of the
'HrTimerMode' from implementing the trait on their own types
- Pass the correct timer mode ID to 'hrtimer_start_range_ns()'
- 'list' module: remove 'OFFSET' constants, allowing to remove
pointer arithmetic; now 'impl_list_item!' invokes
'impl_has_list_links!' or 'impl_has_list_links_self_ptr!'. Other
simplifications too
- 'types' module: remove 'ForeignOwnable::PointedTo' in favor of a
constant, which avoids exposing the type of the opaque pointer, and
require 'into_foreign' to return non-null
Remove the 'Either<L, R>' type as well. It is unused, and we want
to encourage the use of custom enums for concrete use cases
- 'sync' module: implement 'Borrow' and 'BorrowMut' for 'Arc' types
to allow them to be used in generic APIs
- 'alloc' module: implement 'Borrow' and 'BorrowMut' for 'Box<T, A>';
and 'Borrow', 'BorrowMut' and 'Default' for 'Vec<T, A>'
- 'Opaque' type: add 'cast_from' method to perform a restricted cast
that cannot change the inner type and use it in callers of
'container_of!'. Rename 'raw_get' to 'cast_into' to match it
- 'rbtree' module: add 'is_empty' method
- 'sync' module: new 'aref' submodule to hold 'AlwaysRefCounted' and
'ARef', which are moved from the too general 'types' module which
we want to reduce or eventually remove. Also fix a safety comment
in 'static_lock_class'
'pin-init' crate:
- Add 'impl<T, E> [Pin]Init<T, E> for Result<T, E>', so results are
now (pin-)initializers
- Add 'Zeroable::init_zeroed()' that delegates to 'init_zeroed()'
- New 'zeroed()', a safe version of 'mem::zeroed()' and also provide
it via 'Zeroable::zeroed()'
- Implement 'Zeroable' for 'Option<&T>', 'Option<&mut T>' and for
'Option<[unsafe] [extern "abi"] fn(...args...) -> ret>' for
'"Rust"' and '"C"' ABIs and up to 20 arguments
- Changed blanket impls of 'Init' and 'PinInit' from 'impl<T, E>
[Pin]Init<T, E> for T' to 'impl<T> [Pin]Init<T> for T'
- Renamed 'zeroed()' to 'init_zeroed()'
- Upstream dev news: improve CI more to deny warnings, use
'--all-targets'. Check the synchronization status of the two
'-next' branches in upstream and the kernel
MAINTAINERS:
- Add Vlastimil Babka, Liam R. Howlett, Uladzislau Rezki and Lorenzo
Stoakes as reviewers (thanks everyone)
And a few other cleanups and improvements"
* tag 'rust-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (76 commits)
rust: Add warn_on macro
arm64/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
riscv/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
x86/bug: Add ARCH_WARN_ASM macro for BUG/WARN asm code sharing with Rust
rust: kernel: move ARef and AlwaysRefCounted to sync::aref
rust: sync: fix safety comment for `static_lock_class`
rust: types: remove `Either<L, R>`
rust: kernel: use `core::ffi::CStr` method names
rust: str: add `CStr` methods matching `core::ffi::CStr`
rust: str: remove unnecessary qualification
rust: use `kernel::{fmt,prelude::fmt!}`
rust: kernel: add `fmt` module
rust: kernel: remove `fmt!`, fix clippy::uninlined-format-args
scripts: rust: emit path candidates in panic message
scripts: rust: replace length checks with match
rust: list: remove nonexistent generic parameter in link
rust: bits: add support for bits/genmask macros
rust: list: remove OFFSET constants
rust: list: add `impl_list_item!` examples
rust: list: use fully qualified path
...
Pull MM updates from Andrew Morton:
"As usual, many cleanups. The below blurbiage describes 42 patchsets.
21 of those are partially or fully cleanup work. "cleans up",
"cleanup", "maintainability", "rationalizes", etc.
I never knew the MM code was so dirty.
"mm: ksm: prevent KSM from breaking merging of new VMAs" (Lorenzo Stoakes)
addresses an issue with KSM's PR_SET_MEMORY_MERGE mode: newly
mapped VMAs were not eligible for merging with existing adjacent
VMAs.
"mm/damon: introduce DAMON_STAT for simple and practical access monitoring" (SeongJae Park)
adds a new kernel module which simplifies the setup and usage of
DAMON in production environments.
"stop passing a writeback_control to swap/shmem writeout" (Christoph Hellwig)
is a cleanup to the writeback code which removes a couple of
pointers from struct writeback_control.
"drivers/base/node.c: optimization and cleanups" (Donet Tom)
contains largely uncorrelated cleanups to the NUMA node setup and
management code.
"mm: userfaultfd: assorted fixes and cleanups" (Tal Zussman)
does some maintenance work on the userfaultfd code.
"Readahead tweaks for larger folios" (Ryan Roberts)
implements some tuneups for pagecache readahead when it is reading
into order>0 folios.
"selftests/mm: Tweaks to the cow test" (Mark Brown)
provides some cleanups and consistency improvements to the
selftests code.
"Optimize mremap() for large folios" (Dev Jain)
does that. A 37% reduction in execution time was measured in a
memset+mremap+munmap microbenchmark.
"Remove zero_user()" (Matthew Wilcox)
expunges zero_user() in favor of the more modern memzero_page().
"mm/huge_memory: vmf_insert_folio_*() and vmf_insert_pfn_pud() fixes" (David Hildenbrand)
addresses some warts which David noticed in the huge page code.
These were not known to be causing any issues at this time.
"mm/damon: use alloc_migrate_target() for DAMOS_MIGRATE_{HOT,COLD" (SeongJae Park)
provides some cleanup and consolidation work in DAMON.
"use vm_flags_t consistently" (Lorenzo Stoakes)
uses vm_flags_t in places where we were inappropriately using other
types.
"mm/memfd: Reserve hugetlb folios before allocation" (Vivek Kasireddy)
increases the reliability of large page allocation in the memfd
code.
"mm: Remove pXX_devmap page table bit and pfn_t type" (Alistair Popple)
removes several now-unneeded PFN_* flags.
"mm/damon: decouple sysfs from core" (SeongJae Park)
implememnts some cleanup and maintainability work in the DAMON
sysfs layer.
"madvise cleanup" (Lorenzo Stoakes)
does quite a lot of cleanup/maintenance work in the madvise() code.
"madvise anon_name cleanups" (Vlastimil Babka)
provides additional cleanups on top or Lorenzo's effort.
"Implement numa node notifier" (Oscar Salvador)
creates a standalone notifier for NUMA node memory state changes.
Previously these were lumped under the more general memory
on/offline notifier.
"Make MIGRATE_ISOLATE a standalone bit" (Zi Yan)
cleans up the pageblock isolation code and fixes a potential issue
which doesn't seem to cause any problems in practice.
"selftests/damon: add python and drgn based DAMON sysfs functionality tests" (SeongJae Park)
adds additional drgn- and python-based DAMON selftests which are
more comprehensive than the existing selftest suite.
"Misc rework on hugetlb faulting path" (Oscar Salvador)
fixes a rather obscure deadlock in the hugetlb fault code and
follows that fix with a series of cleanups.
"cma: factor out allocation logic from __cma_declare_contiguous_nid" (Mike Rapoport)
rationalizes and cleans up the highmem-specific code in the CMA
allocator.
"mm/migration: rework movable_ops page migration (part 1)" (David Hildenbrand)
provides cleanups and future-preparedness to the migration code.
"mm/damon: add trace events for auto-tuned monitoring intervals and DAMOS quota" (SeongJae Park)
adds some tracepoints to some DAMON auto-tuning code.
"mm/damon: fix misc bugs in DAMON modules" (SeongJae Park)
does that.
"mm/damon: misc cleanups" (SeongJae Park)
also does what it claims.
"mm: folio_pte_batch() improvements" (David Hildenbrand)
cleans up the large folio PTE batching code.
"mm/damon/vaddr: Allow interleaving in migrate_{hot,cold} actions" (SeongJae Park)
facilitates dynamic alteration of DAMON's inter-node allocation
policy.
"Remove unmap_and_put_page()" (Vishal Moola)
provides a couple of page->folio conversions.
"mm: per-node proactive reclaim" (Davidlohr Bueso)
implements a per-node control of proactive reclaim - beyond the
current memcg-based implementation.
"mm/damon: remove damon_callback" (SeongJae Park)
replaces the damon_callback interface with a more general and
powerful damon_call()+damos_walk() interface.
"mm/mremap: permit mremap() move of multiple VMAs" (Lorenzo Stoakes)
implements a number of mremap cleanups (of course) in preparation
for adding new mremap() functionality: newly permit the remapping
of multiple VMAs when the user is specifying MREMAP_FIXED. It still
excludes some specialized situations where this cannot be performed
reliably.
"drop hugetlb_free_pgd_range()" (Anthony Yznaga)
switches some sparc hugetlb code over to the generic version and
removes the thus-unneeded hugetlb_free_pgd_range().
"mm/damon/sysfs: support periodic and automated stats update" (SeongJae Park)
augments the present userspace-requested update of DAMON sysfs
monitoring files. Automatic update is now provided, along with a
tunable to control the update interval.
"Some randome fixes and cleanups to swapfile" (Kemeng Shi)
does what is claims.
"mm: introduce snapshot_page" (Luiz Capitulino and David Hildenbrand)
provides (and uses) a means by which debug-style functions can grab
a copy of a pageframe and inspect it locklessly without tripping
over the races inherent in operating on the live pageframe
directly.
"use per-vma locks for /proc/pid/maps reads" (Suren Baghdasaryan)
addresses the large contention issues which can be triggered by
reads from that procfs file. Latencies are reduced by more than
half in some situations. The series also introduces several new
selftests for the /proc/pid/maps interface.
"__folio_split() clean up" (Zi Yan)
cleans up __folio_split()!
"Optimize mprotect() for large folios" (Dev Jain)
provides some quite large (>3x) speedups to mprotect() when dealing
with large folios.
"selftests/mm: reuse FORCE_READ to replace "asm volatile("" : "+r" (XXX));" and some cleanup" (wang lian)
does some cleanup work in the selftests code.
"tools/testing: expand mremap testing" (Lorenzo Stoakes)
extends the mremap() selftest in several ways, including adding
more checking of Lorenzo's recently added "permit mremap() move of
multiple VMAs" feature.
"selftests/damon/sysfs.py: test all parameters" (SeongJae Park)
extends the DAMON sysfs interface selftest so that it tests all
possible user-requested parameters. Rather than the present minimal
subset"
* tag 'mm-stable-2025-07-30-15-25' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (370 commits)
MAINTAINERS: add missing headers to mempory policy & migration section
MAINTAINERS: add missing file to cgroup section
MAINTAINERS: add MM MISC section, add missing files to MISC and CORE
MAINTAINERS: add missing zsmalloc file
MAINTAINERS: add missing files to page alloc section
MAINTAINERS: add missing shrinker files
MAINTAINERS: move memremap.[ch] to hotplug section
MAINTAINERS: add missing mm_slot.h file THP section
MAINTAINERS: add missing interval_tree.c to memory mapping section
MAINTAINERS: add missing percpu-internal.h file to per-cpu section
mm/page_alloc: remove trace_mm_alloc_contig_migrate_range_info()
selftests/damon: introduce _common.sh to host shared function
selftests/damon/sysfs.py: test runtime reduction of DAMON parameters
selftests/damon/sysfs.py: test non-default parameters runtime commit
selftests/damon/sysfs.py: generalize DAMON context commit assertion
selftests/damon/sysfs.py: generalize monitoring attributes commit assertion
selftests/damon/sysfs.py: generalize DAMOS schemes commit assertion
selftests/damon/sysfs.py: test DAMOS filters commitment
selftests/damon/sysfs.py: generalize DAMOS scheme commit assertion
selftests/damon/sysfs.py: test DAMOS destinations commitment
...
Pull fsnotify updates from Jan Kara:
"A couple of small improvements for fsnotify subsystem.
The most interesting is probably Amir's change modifying the meaning
of fsnotify fmode bits (and I spell it out specifically because I know
you care about those). There's no change for the common cases of no
fsnotify watches or no permission event watches. But when there are
permission watches (either for open or for pre-content events) but no
FAN_ACCESS_PERM watch (which nobody uses in practice) we are now able
optimize away unnecessary cache loads from the read path"
* tag 'fsnotify_for_v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fsnotify: optimize FMODE_NONOTIFY_PERM for the common cases
fsnotify: merge file_set_fsnotify_mode_from_watchers() with open perm hook
samples: fix building fs-monitor on musl systems
fanotify: sanitize handle_type values when reporting fid
Pull drm updates from Dave Airlie:
"Highlights:
- Intel xe enable Panthor Lake, started adding WildCat Lake
- amdgpu has a bunch of reset improvments along with the usual IP
updates
- msm got VM_BIND support which is important for vulkan sparse memory
- more drm_panic users
- gpusvm common code to handle a bunch of core SVM work outside
drivers.
Detail summary:
Changes outside drm subdirectory:
- 'shrink_shmem_memory()' for better shmem/hibernate interaction
- Rust support infrastructure:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
- mtd driver for Intel GPU non-volatile storage
- i2c designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support"
* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
drm/tidss: encoder: convert to devm_drm_bridge_alloc()
drm/amdgpu: move reset support type checks into the caller
drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
drm/amdgpu: Add WARN_ON to the resource clear function
drm/amd/pm: Use cached metrics data on SMUv13.0.6
drm/amd/pm: Use cached data for min/max clocks
gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
drm/amdgpu: Replace HQD terminology with slots naming
drm/amdgpu: Add user queue instance count in HW IP info
drm/amd/amdgpu: Add helper functions for isp buffers
drm/amd/amdgpu: Initialize swnode for ISP MFD device
...
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Remove unneeded debugfs_file_{get,put}() instances
- Remove last remnants of debugfs_real_fops()
- Allow storing non-const void * in struct debugfs_inode_info::aux
sysfs:
- Switch back to attribute_group::bin_attrs (treewide)
- Switch back to bin_attribute::read()/write() (treewide)
- Constify internal references to 'struct bin_attribute'
Support cache-ids for device-tree systems:
- Add arch hook arch_compact_of_hwid()
- Use arch_compact_of_hwid() to compact MPIDR values on arm64
Rust:
- Device:
- Introduce CoreInternal device context (for bus internal methods)
- Provide generic drvdata accessors for bus devices
- Provide Driver::unbind() callbacks
- Use the infrastructure above for auxiliary, PCI and platform
- Implement Device::as_bound()
- Rename Device::as_ref() to Device::from_raw() (treewide)
- Implement fwnode and device property abstractions
- Implement example usage in the Rust platform sample driver
- Devres:
- Remove the inner reference count (Arc) and use pin-init instead
- Replace Devres::new_foreign_owned() with devres::register()
- Require T to be Send in Devres<T>
- Initialize the data kept inside a Devres last
- Provide an accessor for the Devres associated Device
- Device ID:
- Add support for ACPI device IDs and driver match tables
- Split up generic device ID infrastructure
- Use generic device ID infrastructure in net::phy
- DMA:
- Implement the dma::Device trait
- Add DMA mask accessors to dma::Device
- Implement dma::Device for PCI and platform devices
- Use DMA masks from the DMA sample module
- I/O:
- Implement abstraction for resource regions (struct resource)
- Implement resource-based ioremap() abstractions
- Provide platform device accessors for I/O (remap) requests
- Misc:
- Support fallible PinInit types in Revocable
- Implement Wrapper<T> for Opaque<T>
- Merge pin-init blanket dependencies (for Devres)
Misc:
- Fix OF node leak in auxiliary_device_create()
- Use util macros in device property iterators
- Improve kobject sample code
- Add device_link_test() for testing device link flags
- Fix typo in Documentation/ABI/testing/sysfs-kernel-address_bits
- Hint to prefer container_of_const() over container_of()"
* tag 'driver-core-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (84 commits)
rust: io: fix broken intra-doc links to `platform::Device`
rust: io: fix broken intra-doc link to missing `flags` module
rust: io: mem: enable IoRequest doc-tests
rust: platform: add resource accessors
rust: io: mem: add a generic iomem abstraction
rust: io: add resource abstraction
rust: samples: dma: set DMA mask
rust: platform: implement the `dma::Device` trait
rust: pci: implement the `dma::Device` trait
rust: dma: add DMA addressing capabilities
rust: dma: implement `dma::Device` trait
rust: net::phy Change module_phy_driver macro to use module_device_table macro
rust: net::phy represent DeviceId as transparent wrapper over mdio_device_id
rust: device_id: split out index support into a separate trait
device: rust: rename Device::as_ref() to Device::from_raw()
arm64: cacheinfo: Provide helper to compress MPIDR value into u32
cacheinfo: Add arch hook to compress CPU h/w id into 32 bits for cache-id
cacheinfo: Set cache 'id' based on DT data
container_of: Document container_of() is not to be used in new code
driver core: auxiliary bus: fix OF node leak
...
Pull char / misc / IIO / other driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystems for 6.17-rc1. It's a big set this time around, with the
huge majority being in the iio subsystem with new drivers and dts
files being added there.
Highlights include:
- IIO driver updates, additions, and changes making more code const
and cleaning up some init logic
- bus_type constant conversion changes
- misc device test functions added
- rust miscdevice minor fixup
- unused function removals for some drivers
- mei driver updates
- mhi driver updates
- interconnect driver updates
- Android binder updates and test infrastructure added
- small cdx driver updates
- small comedi fixes
- small nvmem driver updates
- small pps driver updates
- some acrn virt driver fixes for printk messages
- other small driver updates
All of these have been in linux-next with no reported issues"
* tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
binder: Use seq_buf in binder_alloc kunit tests
binder: Add copyright notice to new kunit files
misc: ti_fpc202: Switch to of_fwnode_handle()
bus: moxtet: Use dev_fwnode()
pc104: move PC104 option to drivers/Kconfig
drivers: virt: acrn: Don't use %pK through printk
comedi: fix race between polling and detaching
interconnect: qcom: Add Milos interconnect provider driver
dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm Milos SoC
mei: more prints with client prefix
mei: bus: use cldev in prints
bus: mhi: host: pci_generic: Add Telit FN990B40 modem support
bus: mhi: host: Detect events pointing to unexpected TREs
bus: mhi: host: pci_generic: Add Foxconn T99W696 modem
bus: mhi: host: Use str_true_false() helper
bus: mhi: host: pci_generic: Add support for EM929x and set MRU to 32768 for better performance.
bus: mhi: host: Fix endianness of BHI vector table
bus: mhi: host: pci_generic: Disable runtime PM for QDU100
bus: mhi: host: pci_generic: Fix the modem name of Foxconn T99W640
dt-bindings: interconnect: qcom,msm8998-bwmon: Allow 'nonposted-mmio'
...
Pull landlock update from Mickaël Salaün:
"Fix test issues, improve build compatibility, and add new tests"
* tag 'landlock-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Fix cosmetic change
samples/landlock: Fix building on musl libc
landlock: Fix warning from KUnit tests
selftests/landlock: Add test to check rule tied to covered mount point
selftests/landlock: Fix build of audit_test
selftests/landlock: Fix readlink check
samples/fanotify/fs-monitor.c:22:9: error: unknown type name '__s32'
22 | __s32 error;
| ^~~~~
samples/fanotify/fs-monitor.c:23:9: error: unknown type name '__u32'
23 | __u32 error_count;
| ^~~~~
samples/fanotify/fs-monitor.c: In function 'handle_notifications':
samples/fanotify/fs-monitor.c:98:50: error: 'fsid_t' has no member named 'val';
did you mean '__val'?
98 | fid->fsid.val[0],
fid->fsid.val[1]);
| ^~~
| __val
samples/fanotify/fs-monitor.c:98:68: error: 'fsid_t' has no member named 'val';
did you mean '__val'?
98 | fid->fsid.val[0],
fid->fsid.val[1]);
| ^~~
| __val
This is due to sys/fanotify.h on musl does not include
linux/fanotify.h[0] unlike glibc which includes it. This also results in
fsid not being of type __kernel_fsid_t, rather the libc's definition of
it which does not have val, but instead __val.
[0]: https://git.musl-libc.org/cgit/musl/tree/include/sys/fanotify.h
Signed-off-by: Brahmajit Das <listout@listout.xyz>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250630103011.27484-1-listout@listout.xyz
Extend the hung_task detector test module to include read-write semaphore
support alongside existing mutex and semaphore tests. This module now
creates additional debugfs files under <debugfs>/hung_task, namely
'rw_semaphore_read' and 'rw_semaphore_write', in addition to 'mutex' and
'semaphore'. Reading these files with multiple processes triggers a
prolonged sleep (256 seconds) while holding the respective lock, enabling
hung_task detector testing for various locking mechanisms.
This change builds on the extensible hung_task_tests module, adding
read-write semaphore functionality to improve test coverage for kernel
locking primitives. The implementation ensures proper lock handling and
includes checks to prevent redundant data reads.
Usage is:
> cd /sys/kernel/debug/hung_task
> cat mutex & cat mutex # Test mutex blocking
> cat semaphore & cat semaphore # Test semaphore blocking
> cat rw_semaphore_write \
& cat rw_semaphore_read # Test rwsem blocking
> cat rw_semaphore_write \
& cat rw_semaphore_write # Test rwsem blocking
Update the Kconfig description to reflect the addition of read-write
semaphore debugfs files.
Link: https://lkml.kernel.org/r/20250627072924.36567-4-lance.yang@linux.dev
Signed-off-by: Zi Li <zi.li@linux.dev>
Suggested-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Anna Schumaker <anna.schumaker@oracle.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joel Granados <joel.granados@kernel.org>
Cc: John Stultz <jstultz@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Mingzhe Yang <mingzhe.yang@ly.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tomasz Figa <tfiga@chromium.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yongliang Gao <leonylgao@tencent.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement cleanup_target() callback for [f]vaddr, which calls put_pid()
for each target that will be destroyed. Also remove redundant put_pid()
calls in core, sysfs and sample modules, which were required to be done
redundantly due to the lack of such self cleanup in vaddr.
Link: https://lkml.kernel.org/r/20250712195016.151108-11-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch adds a new knob `detect_node_addresses`, which determines
whether the physical address range is set manually using the existing
knobs or automatically by the mtier module. When `detect_node_addresses`
set to 'Y', mtier automatically converts node0 and node1 to their physical
addresses. If set to 'N', it uses the existing 'node#_start_addr' and
'node#_end_addr' to define regions as before.
Link: https://lkml.kernel.org/r/20250707235919.513-1-yunjeong.mun@sk.com
Signed-off-by: Yunjeong Mun <yunjeong.mun@sk.com>
Suggested-by: Honggyu Kim <honggyu.kim@sk.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The damon_{lru_sort,reclaim,stat} kernel modules use "enabled" parameter
knobs as follows.
/sys/module/damon_lru_sort/parameters/enabled
/sys/module/damon_reclaim/parameters/enabled
/sys/module/damon_stat/parameters/enabled
However, other sample modules of damon use "enable" parameter knobs so
it'd be better to rename them from "enable" to "enabled" to keep the
consistency with other damon modules.
Before:
/sys/module/damon_sample_wsse/parameters/enable
/sys/module/damon_sample_prcl/parameters/enable
/sys/module/damon_sample_mtier/parameters/enable
After:
/sys/module/damon_sample_wsse/parameters/enabled
/sys/module/damon_sample_prcl/parameters/enabled
/sys/module/damon_sample_mtier/parameters/enabled
There is no functional changes in this patch.
Link: https://lkml.kernel.org/r/20250707024548.1964-1-honggyu.kim@sk.com
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON sample module, mtier has its name 'mtier'. It could conflict with
future modules, and not very easy to identify it by name. Use a prefix,
"damon_sample_" for the name.
Note that this could break users if they depend on the old name. But it
is just a sample, so no such usage is expected, or known. Even if such
usage exists, updating it for the new name should be straightforward.
Link: https://lkml.kernel.org/r/20250705175000.56259-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON sample module, prcl has its name 'prcl'. It could conflict with
future modules, and not very easy to identify it by name. Use a prefix,
"damon_sample_" for the name.
Note that this could break users if they depend on the old name. But it
is just a sample, so no such usage is expected, or known. Even if such
usage exists, updating it for the new name should be straightforward.
Link: https://lkml.kernel.org/r/20250705175000.56259-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: misc cleanups".
Yet another round of miscellaneous DAMON cleanups.
This patch (of 6):
DAMON sample module, wsse has its name 'wsse'. It could conflict with
future modules, and not very easy to identify it by name. Use a prefix,
"damon_sample_" for the name.
Note that this could break users if they depend on the old name. But it
is just a sample, so no such usage is expected, or known. Even if such
usage exists, updating it for the new name should be straightforward.
Link: https://lkml.kernel.org/r/20250705175000.56259-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20250705175000.56259-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The header bits/wordsize.h is glibc specific and on building on musl
with allyesconfig results in
samples/mei/mei-amt-version.c:77:10: fatal error: bits/wordsize.h: No such file or directory
77 | #include <bits/wordsize.h>
| ^~~~~~~~~~~~~~~~~
mei-amt-version.c build file without bits/wordsize.h on musl and glibc.
However on musl we get the follwing error without sys/time.h
samples/mei/mei-amt-version.c: In function 'mei_recv_msg':
samples/mei/mei-amt-version.c:159:24: error: storage size of 'tv' isn't known
159 | struct timeval tv;
| ^~
samples/mei/mei-amt-version.c:160:9: error: unknown type name 'fd_set'
160 | fd_set set;
| ^~~~~~
samples/mei/mei-amt-version.c:168:9: error: implicit declaration of function 'FD_ZERO' [-Wimplicit-function-declaration]
168 | FD_ZERO(&set);
| ^~~~~~~
samples/mei/mei-amt-version.c:169:9: error: implicit declaration of function 'FD_SET'; did you mean 'L_SET'? [-Wimplicit-function-declaration]
169 | FD_SET(me->fd, &set);
| ^~~~~~
| L_SET
samples/mei/mei-amt-version.c:170:14: error: implicit declaration of function 'select' [-Wimplicit-function-declaration]
170 | rc = select(me->fd + 1, &set, NULL, NULL, &tv);
| ^~~~~~
samples/mei/mei-amt-version.c:171:23: error: implicit declaration of function 'FD_ISSET' [-Wimplicit-function-declaration]
171 | if (rc > 0 && FD_ISSET(me->fd, &set)) {
| ^~~~~~~~
samples/mei/mei-amt-version.c:159:24: warning: unused variable 'tv' [-Wunused-variable]
159 | struct timeval tv;
| ^~
Hence the the file has been included.
Fixes: c52827cc4d ("staging/mei: add mei user space example")
Signed-off-by: Brahmajit Das <listout@listout.xyz>
Link: https://lore.kernel.org/r/20250702135955.24955-1-listout@listout.xyz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull alloc and DMA updates from Danilo Krummrich:
Box:
- Implement Borrow / BorrowMut for Box<T, A>.
Vec:
- Implement Default for Vec<T, A>.
- Implement Borrow / BorrowMut for Vec<T, A>.
DMA:
- Clarify wording and be consistent in 'coherent' nomenclature.
- Convert the read!() / write!() macros to return a Result.
- Add as_slice() / write() methods in CoherentAllocation.
- Fix doc-comment of dma_handle().
- Expose count() and size() in CoherentAllocation and add the
corresponding type invariants.
- Implement CoherentAllocation::dma_handle_with_offset().
- Require mutable reference for as_slice_mut() and write().
MAINTAINERS:
- Add Vlastimil Babka, Liam R. Howlett, Uladzislau Rezki and Lorenzo
Stoakes as reviewers (thanks everyone).
* tag 'alloc-next-v6.17-2025-07-15' of https://github.com/Rust-for-Linux/linux:
MAINTAINERS: add mm folks as reviewers to rust alloc
rust: dma: require mutable reference for as_slice_mut() and write()
rust: dma: add dma_handle_with_offset method to CoherentAllocation
rust: dma: expose the count and size of CoherentAllocation
rust: dma: fix doc-comment of dma_handle()
rust: dma: add as_slice/write functions for CoherentAllocation
rust: dma: convert the read/write macros to return Result
rust: dma: clarify wording and be consistent in `coherent` nomenclature
rust: alloc: implement `Borrow` and `BorrowMut` for `KBox`
rust: alloc: implement `Borrow` and `BorrowMut` for `Vec`
rust: vec: impl Default for Vec with any allocator
Currently, Rust code uses a typedef for unsigned long to represent
userspace addresses. This is unfortunate because it means that userspace
addresses could accidentally be mixed up with other integers. To
alleviate that, we introduce a new UserPtr struct that wraps a raw
pointer to represent a userspace address. By using a struct, type
checking enforces that userspace addresses cannot be mixed up with
anything else.
This is similar to the __user annotation in C that detects cases where
user pointers are mixed with non-user pointers.
Note that unlike __user pointers in C, this type is just a pointer
without a target type. This means that it can't detect cases such as
mixing up which struct this user pointer references. However, that is
okay due to the way this is intended to be used - generally, you create
a UserPtr in your ioctl callback from the provided usize *before*
dispatching on which ioctl is in use, and then after dispatching on the
ioctl you pass the UserPtr into a UserSliceReader or UserSliceWriter;
selecting the target type does not happen until you have obtained the
UserSliceReader/Writer.
The UserPtr type is not marked with #[derive(Debug)], which means that
it's not possible to print values of this type. This avoids ASLR
leakage.
The type is added to the prelude as it is a fairly fundamental type
similar to c_int. The wrapping_add() method is renamed to
wrapping_byte_add() for consistency with the method name found on raw
pointers.
Reviewed-by: Benno Lossin <lossin@kernel.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Reviewed-by: Christian Schrefl <chrisi.schrefl@gmail.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250616-userptr-newtype-v3-1-5ff7b2d18d9e@google.com
[ Reworded title. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
If 'enable' parameter of the 'mtier' DAMON sample module is set at boot
time via the kernel command line, memory allocation is tried before the
slab is initialized. As a result kernel NULL pointer dereference BUG can
happen. Fix it by checking the initialization status.
Link: https://lkml.kernel.org/r/20250706193207.39810-4-sj@kernel.org
Fixes: 82a08bde3c ("samples/damon: implement a DAMON module for memory tiering")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If 'enable' parameter of the 'prcl' DAMON sample module is set at boot
time via the kernel command line, memory allocation is tried before the
slab is initialized. As a result kernel NULL pointer dereference BUG can
happen. Fix it by checking the initialization status.
Link: https://lkml.kernel.org/r/20250706193207.39810-3-sj@kernel.org
Fixes: 2aca254620 ("samples/damon: introduce a skeleton of a smaple DAMON module for proactive reclamation")
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
